2018-10-16 01:30:33,231 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:34,115 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:34,118 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:34,120 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:34,123 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:35,931 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:35,935 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:35,938 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:36,115 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:36,118 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:36,121 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:36,124 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:37,832 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:37,989 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:37,992 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:37,995 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:37,998 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,001 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,004 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,007 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,010 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,013 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,016 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,019 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,022 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,025 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,028 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,031 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,034 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,037 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,040 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,042 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,045 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,048 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,051 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,053 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,056 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,059 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,061 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,064 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,067 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,069 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,072 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,074 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,077 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,080 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,082 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,085 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,087 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,090 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,093 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,095 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,098 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,100 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,103 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,105 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:30:38,108 [salt.utils.decorators:82  ][ERROR   ][1845] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 01:31:18,963 [salt.utils.decorators:613 ][WARNING ][1845] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-16 01:31:22,733 [salt.loaded.int.states.file:2150][WARNING ][1845] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-16 01:31:24,115 [salt.loaded.int.states.file:2150][WARNING ][1845] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-16 01:31:27,021 [salt.loaded.int.states.file:2150][WARNING ][1845] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-16 01:31:31,307 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-10-16 01:31:31,335 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-10-16 01:31:31,355 [salt.utils.parsers:1051][WARNING ][1476] Minion received a SIGTERM. Exiting.
2018-10-16 01:31:32,403 [salt.cli.daemons :293 ][INFO    ][3131] Setting up the Salt Minion "mdb01.mcp-ovs-dpdk-ha.local"
2018-10-16 01:31:32,494 [salt.cli.daemons :82  ][INFO    ][3131] Starting up the Salt Minion
2018-10-16 01:31:32,494 [salt.utils.event :1017][INFO    ][3131] Starting pull socket on /var/run/salt/minion/minion_event_19308d998f_pull.ipc
2018-10-16 01:31:33,081 [salt.minion      :976 ][INFO    ][3131] Creating minion process manager
2018-10-16 01:31:34,190 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3131] Executing command ['date', '+%z'] in directory '/root'
2018-10-16 01:31:34,217 [salt.utils.schedule:568 ][INFO    ][3131] Updating job settings for scheduled job: __mine_interval
2018-10-16 01:31:34,282 [salt.minion      :1107][INFO    ][3131] Added mine.update to scheduler
2018-10-16 01:31:34,393 [salt.minion      :1965][INFO    ][3131] Minion is starting as user 'root'
2018-10-16 01:31:34,408 [salt.minion      :2324][INFO    ][3131] Minion is ready to receive requests!
2018-10-16 01:32:54,024 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command state.apply with jid 20181016013254009471
2018-10-16 01:32:54,040 [salt.minion      :1431][INFO    ][3232] Starting a new job with PID 3232
2018-10-16 01:32:59,049 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013259035582
2018-10-16 01:32:59,084 [salt.minion      :1431][INFO    ][3239] Starting a new job with PID 3239
2018-10-16 01:32:59,100 [salt.minion      :1708][INFO    ][3239] Returning information for job: 20181016013259035582
2018-10-16 01:32:59,161 [salt.state       :905 ][INFO    ][3232] Loading fresh modules for state activity
2018-10-16 01:32:59,661 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-10-16 01:33:00,676 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-10-16 01:33:00,766 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-10-16 01:33:00,836 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-10-16 01:33:00,905 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-10-16 01:33:01,042 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-10-16 01:33:01,115 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-10-16 01:33:01,179 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-10-16 01:33:01,265 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-10-16 01:33:01,283 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-10-16 01:33:01,349 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-10-16 01:33:01,421 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-10-16 01:33:01,486 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-10-16 01:33:01,572 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-10-16 01:33:01,643 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-10-16 01:33:02,993 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2018-10-16 01:33:03,061 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-10-16 01:33:03,128 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-10-16 01:33:03,198 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-10-16 01:33:03,268 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-10-16 01:33:03,335 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-10-16 01:33:03,401 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-10-16 01:33:03,506 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-10-16 01:33:04,458 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-10-16 01:33:04,790 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-10-16 01:33:04,868 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-10-16 01:33:04,904 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-10-16 01:33:04,953 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-10-16 01:33:04,983 [salt.state       :1770][INFO    ][3232] Running state [/etc/environment] at time 01:33:04.983884
2018-10-16 01:33:04,984 [salt.state       :1803][INFO    ][3232] Executing state file.blockreplace for [/etc/environment]
2018-10-16 01:33:04,991 [salt.state       :290 ][INFO    ][3232] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-10-16 01:33:04,991 [salt.state       :1941][INFO    ][3232] Completed state [/etc/environment] at time 01:33:04.991367 duration_in_ms=7.484
2018-10-16 01:33:04,991 [salt.state       :1770][INFO    ][3232] Running state [/etc/profile.d] at time 01:33:04.991565
2018-10-16 01:33:04,991 [salt.state       :1803][INFO    ][3232] Executing state file.directory for [/etc/profile.d]
2018-10-16 01:33:04,999 [salt.state       :290 ][INFO    ][3232] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-10-16 01:33:04,999 [salt.state       :1941][INFO    ][3232] Completed state [/etc/profile.d] at time 01:33:04.999647 duration_in_ms=8.082
2018-10-16 01:33:05,542 [salt.state       :1770][INFO    ][3232] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 01:33:05.542399
2018-10-16 01:33:05,543 [salt.state       :1803][INFO    ][3232] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-10-16 01:33:06,061 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-10-16 01:33:06,080 [salt.state       :290 ][INFO    ][3232] File changed:
New file
2018-10-16 01:33:06,080 [salt.state       :1941][INFO    ][3232] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 01:33:06.080533 duration_in_ms=538.135
2018-10-16 01:33:06,080 [salt.state       :1770][INFO    ][3232] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 01:33:06.080786
2018-10-16 01:33:06,081 [salt.state       :1803][INFO    ][3232] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-10-16 01:33:06,634 [salt.state       :290 ][INFO    ][3232] File changed:
New file
2018-10-16 01:33:06,635 [salt.state       :1941][INFO    ][3232] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 01:33:06.635256 duration_in_ms=554.468
2018-10-16 01:33:06,636 [salt.state       :1770][INFO    ][3232] Running state [linux_repo_prereq_pkgs] at time 01:33:06.636767
2018-10-16 01:33:06,637 [salt.state       :1803][INFO    ][3232] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-10-16 01:33:06,638 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:33:06,986 [salt.state       :290 ][INFO    ][3232] All specified packages are already installed
2018-10-16 01:33:06,987 [salt.state       :1941][INFO    ][3232] Completed state [linux_repo_prereq_pkgs] at time 01:33:06.987254 duration_in_ms=350.487
2018-10-16 01:33:06,987 [salt.state       :1770][INFO    ][3232] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 01:33:06.987530
2018-10-16 01:33:06,987 [salt.state       :1803][INFO    ][3232] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-10-16 01:33:06,988 [salt.state       :290 ][INFO    ][3232] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-10-16 01:33:06,988 [salt.state       :1941][INFO    ][3232] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 01:33:06.988359 duration_in_ms=0.829
2018-10-16 01:33:06,988 [salt.state       :1770][INFO    ][3232] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 01:33:06.988525
2018-10-16 01:33:06,988 [salt.state       :1803][INFO    ][3232] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-10-16 01:33:06,988 [salt.state       :290 ][INFO    ][3232] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-10-16 01:33:06,989 [salt.state       :1941][INFO    ][3232] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 01:33:06.989028 duration_in_ms=0.503
2018-10-16 01:33:06,989 [salt.state       :1770][INFO    ][3232] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 01:33:06.989194
2018-10-16 01:33:06,989 [salt.state       :1803][INFO    ][3232] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-10-16 01:33:07,007 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-10-16 01:33:07,065 [salt.state       :290 ][INFO    ][3232] File changed:
New file
2018-10-16 01:33:07,065 [salt.state       :1941][INFO    ][3232] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 01:33:07.065384 duration_in_ms=76.19
2018-10-16 01:33:07,067 [salt.state       :1770][INFO    ][3232] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 01:33:07.067573
2018-10-16 01:33:07,067 [salt.state       :1803][INFO    ][3232] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-10-16 01:33:08,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-10-16 01:33:08,546 [salt.state       :290 ][INFO    ][3232] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-10-16 01:33:08,546 [salt.state       :1941][INFO    ][3232] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 01:33:08.546573 duration_in_ms=1478.999
2018-10-16 01:33:08,546 [salt.state       :1770][INFO    ][3232] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 01:33:08.546897
2018-10-16 01:33:08,547 [salt.state       :1803][INFO    ][3232] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-10-16 01:33:08,547 [salt.state       :290 ][INFO    ][3232] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-10-16 01:33:08,547 [salt.state       :1941][INFO    ][3232] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 01:33:08.547874 duration_in_ms=0.977
2018-10-16 01:33:08,548 [salt.state       :1770][INFO    ][3232] Running state [/etc/apt/preferences.d/uca] at time 01:33:08.548111
2018-10-16 01:33:08,548 [salt.state       :1803][INFO    ][3232] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-10-16 01:33:08,651 [salt.state       :290 ][INFO    ][3232] File changed:
New file
2018-10-16 01:33:08,651 [salt.state       :1941][INFO    ][3232] Completed state [/etc/apt/preferences.d/uca] at time 01:33:08.651517 duration_in_ms=103.406
2018-10-16 01:33:08,652 [salt.state       :1770][INFO    ][3232] Running state [echo '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' | base64 -d | apt-key add -] at time 01:33:08.652860
2018-10-16 01:33:08,653 [salt.state       :1803][INFO    ][3232] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-10-16 01:33:08,654 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-10-16 01:33:08,821 [salt.state       :290 ][INFO    ][3232] {'pid': 3444, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-10-16 01:33:08,822 [salt.state       :1941][INFO    ][3232] Completed state [echo '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' | base64 -d | apt-key add -] at time 01:33:08.822093 duration_in_ms=169.233
2018-10-16 01:33:08,826 [salt.state       :1770][INFO    ][3232] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 01:33:08.825954
2018-10-16 01:33:08,826 [salt.state       :1803][INFO    ][3232] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-10-16 01:33:08,909 [salt.state       :290 ][INFO    ][3232] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-10-16 01:33:08,909 [salt.state       :1941][INFO    ][3232] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 01:33:08.909463 duration_in_ms=83.509
2018-10-16 01:33:08,910 [salt.state       :1770][INFO    ][3232] Running state [pkg.refresh_db] at time 01:33:08.910401
2018-10-16 01:33:08,910 [salt.state       :1803][INFO    ][3232] Executing state module.run for [pkg.refresh_db]
2018-10-16 01:33:08,910 [salt.utils.decorators:613 ][WARNING ][3232] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-16 01:33:08,911 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 01:33:09,113 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013309097983
2018-10-16 01:33:09,143 [salt.minion      :1431][INFO    ][3599] Starting a new job with PID 3599
2018-10-16 01:33:09,160 [salt.minion      :1708][INFO    ][3599] Returning information for job: 20181016013309097983
2018-10-16 01:33:14,658 [salt.state       :290 ][INFO    ][3232] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': True, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-10-16 01:33:14,660 [salt.state       :1941][INFO    ][3232] Completed state [pkg.refresh_db] at time 01:33:14.660112 duration_in_ms=5749.71
2018-10-16 01:33:14,660 [salt.state       :1770][INFO    ][3232] Running state [linux_extra_packages_latest] at time 01:33:14.660655
2018-10-16 01:33:14,661 [salt.state       :1803][INFO    ][3232] Executing state pkg.latest for [linux_extra_packages_latest]
2018-10-16 01:33:14,672 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-10-16 01:33:14,857 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 01:33:14,885 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-10-16 01:33:19,139 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013319122105
2018-10-16 01:33:19,156 [salt.minion      :1431][INFO    ][3996] Starting a new job with PID 3996
2018-10-16 01:33:19,175 [salt.minion      :1708][INFO    ][3996] Returning information for job: 20181016013319122105
2018-10-16 01:33:22,766 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:33:22,807 [salt.state       :290 ][INFO    ][3232] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-10-16 01:33:22,824 [salt.state       :905 ][INFO    ][3232] Loading fresh modules for state activity
2018-10-16 01:33:22,846 [salt.state       :1941][INFO    ][3232] Completed state [linux_extra_packages_latest] at time 01:33:22.846782 duration_in_ms=8186.127
2018-10-16 01:33:22,849 [salt.state       :1770][INFO    ][3232] Running state [UTC] at time 01:33:22.849894
2018-10-16 01:33:22,850 [salt.state       :1803][INFO    ][3232] Executing state timezone.system for [UTC]
2018-10-16 01:33:22,854 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['timedatectl'] in directory '/root'
2018-10-16 01:33:23,107 [salt.state       :290 ][INFO    ][3232] Timezone UTC already set, UTC already set to UTC
2018-10-16 01:33:23,108 [salt.state       :1941][INFO    ][3232] Completed state [UTC] at time 01:33:23.108383 duration_in_ms=258.489
2018-10-16 01:33:23,111 [salt.state       :1770][INFO    ][3232] Running state [/etc/default/grub.d] at time 01:33:23.111342
2018-10-16 01:33:23,111 [salt.state       :1803][INFO    ][3232] Executing state file.directory for [/etc/default/grub.d]
2018-10-16 01:33:23,116 [salt.state       :290 ][INFO    ][3232] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-10-16 01:33:23,116 [salt.state       :1941][INFO    ][3232] Completed state [/etc/default/grub.d] at time 01:33:23.116764 duration_in_ms=5.422
2018-10-16 01:33:23,119 [salt.state       :1770][INFO    ][3232] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 01:33:23.119474
2018-10-16 01:33:23,119 [salt.state       :1803][INFO    ][3232] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2018-10-16 01:33:23,151 [salt.state       :290 ][INFO    ][3232] File changed:
New file
2018-10-16 01:33:23,152 [salt.state       :1941][INFO    ][3232] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 01:33:23.152245 duration_in_ms=32.771
2018-10-16 01:33:23,153 [salt.state       :1770][INFO    ][3232] Running state [update-grub] at time 01:33:23.153392
2018-10-16 01:33:23,153 [salt.state       :1803][INFO    ][3232] Executing state cmd.wait for [update-grub]
2018-10-16 01:33:23,154 [salt.state       :290 ][INFO    ][3232] No changes made for update-grub
2018-10-16 01:33:23,155 [salt.state       :1941][INFO    ][3232] Completed state [update-grub] at time 01:33:23.155113 duration_in_ms=1.721
2018-10-16 01:33:23,155 [salt.state       :1770][INFO    ][3232] Running state [update-grub] at time 01:33:23.155499
2018-10-16 01:33:23,155 [salt.state       :1803][INFO    ][3232] Executing state cmd.mod_watch for [update-grub]
2018-10-16 01:33:23,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'update-grub' in directory '/root'
2018-10-16 01:33:26,041 [salt.state       :290 ][INFO    ][3232] {'pid': 4106, 'retcode': 0, 'stderr': 'Generating grub configuration file ...\nFound linux image: /boot/vmlinuz-4.15.0-36-generic\nFound initrd image: /boot/initrd.img-4.15.0-36-generic\nFound linux image: /boot/vmlinuz-4.4.0-137-generic\nFound initrd image: /boot/initrd.img-4.4.0-137-generic\ndone', 'stdout': ''}
2018-10-16 01:33:26,042 [salt.state       :1941][INFO    ][3232] Completed state [update-grub] at time 01:33:26.042697 duration_in_ms=2887.196
2018-10-16 01:33:26,050 [salt.state       :1770][INFO    ][3232] Running state [nf_conntrack] at time 01:33:26.050109
2018-10-16 01:33:26,051 [salt.state       :1803][INFO    ][3232] Executing state kmod.present for [nf_conntrack]
2018-10-16 01:33:26,052 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'lsmod' in directory '/root'
2018-10-16 01:33:27,783 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'lsmod' in directory '/root'
2018-10-16 01:33:27,806 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-10-16 01:33:27,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'lsmod' in directory '/root'
2018-10-16 01:33:28,041 [salt.state       :290 ][INFO    ][3232] {'nf_conntrack': 'loaded'}
2018-10-16 01:33:28,041 [salt.state       :1941][INFO    ][3232] Completed state [nf_conntrack] at time 01:33:28.041668 duration_in_ms=1991.559
2018-10-16 01:33:28,046 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.tcp_keepalive_probes] at time 01:33:28.046052
2018-10-16 01:33:28,046 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-10-16 01:33:28,047 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-10-16 01:33:28,091 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.tcp_keepalive_probes': 8}
2018-10-16 01:33:28,092 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.tcp_keepalive_probes] at time 01:33:28.092364 duration_in_ms=46.31
2018-10-16 01:33:28,093 [salt.state       :1770][INFO    ][3232] Running state [fs.file-max] at time 01:33:28.092977
2018-10-16 01:33:28,093 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [fs.file-max]
2018-10-16 01:33:28,094 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-10-16 01:33:28,112 [salt.state       :290 ][INFO    ][3232] {'fs.file-max': 124165}
2018-10-16 01:33:28,113 [salt.state       :1941][INFO    ][3232] Completed state [fs.file-max] at time 01:33:28.113429 duration_in_ms=20.452
2018-10-16 01:33:28,113 [salt.state       :1770][INFO    ][3232] Running state [net.core.somaxconn] at time 01:33:28.113882
2018-10-16 01:33:28,114 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.core.somaxconn]
2018-10-16 01:33:28,216 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-10-16 01:33:28,239 [salt.state       :290 ][INFO    ][3232] {'net.core.somaxconn': 4096}
2018-10-16 01:33:28,239 [salt.state       :1941][INFO    ][3232] Completed state [net.core.somaxconn] at time 01:33:28.239822 duration_in_ms=125.939
2018-10-16 01:33:28,240 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.tcp_max_syn_backlog] at time 01:33:28.240264
2018-10-16 01:33:28,240 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-10-16 01:33:28,324 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-10-16 01:33:28,343 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-10-16 01:33:28,344 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.tcp_max_syn_backlog] at time 01:33:28.344352 duration_in_ms=104.087
2018-10-16 01:33:28,345 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.tcp_tw_reuse] at time 01:33:28.345201
2018-10-16 01:33:28,345 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-10-16 01:33:28,348 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-10-16 01:33:28,361 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.tcp_tw_reuse': 1}
2018-10-16 01:33:28,361 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.tcp_tw_reuse] at time 01:33:28.361912 duration_in_ms=16.713
2018-10-16 01:33:28,362 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.tcp_congestion_control] at time 01:33:28.362225
2018-10-16 01:33:28,362 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-10-16 01:33:28,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-10-16 01:33:28,597 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-10-16 01:33:28,598 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.tcp_congestion_control] at time 01:33:28.598698 duration_in_ms=236.47
2018-10-16 01:33:28,600 [salt.state       :1770][INFO    ][3232] Running state [net.nf_conntrack_max] at time 01:33:28.600145
2018-10-16 01:33:28,601 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.nf_conntrack_max]
2018-10-16 01:33:28,603 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-10-16 01:33:28,616 [salt.state       :290 ][INFO    ][3232] {'net.nf_conntrack_max': 1048576}
2018-10-16 01:33:28,616 [salt.state       :1941][INFO    ][3232] Completed state [net.nf_conntrack_max] at time 01:33:28.616895 duration_in_ms=16.751
2018-10-16 01:33:28,617 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.tcp_retries2] at time 01:33:28.617532
2018-10-16 01:33:28,618 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-10-16 01:33:28,652 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-10-16 01:33:28,675 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.tcp_retries2': 5}
2018-10-16 01:33:28,676 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.tcp_retries2] at time 01:33:28.676683 duration_in_ms=59.149
2018-10-16 01:33:28,677 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.tcp_fin_timeout] at time 01:33:28.677603
2018-10-16 01:33:28,678 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-10-16 01:33:28,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-10-16 01:33:28,693 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.tcp_fin_timeout': 30}
2018-10-16 01:33:28,694 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.tcp_fin_timeout] at time 01:33:28.694317 duration_in_ms=16.714
2018-10-16 01:33:28,695 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.tcp_slow_start_after_idle] at time 01:33:28.695246
2018-10-16 01:33:28,696 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-10-16 01:33:28,772 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-10-16 01:33:28,796 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-10-16 01:33:28,797 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 01:33:28.797553 duration_in_ms=102.305
2018-10-16 01:33:28,799 [salt.state       :1770][INFO    ][3232] Running state [vm.swappiness] at time 01:33:28.799304
2018-10-16 01:33:28,800 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [vm.swappiness]
2018-10-16 01:33:28,813 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-10-16 01:33:28,832 [salt.state       :290 ][INFO    ][3232] {'vm.swappiness': 10}
2018-10-16 01:33:28,833 [salt.state       :1941][INFO    ][3232] Completed state [vm.swappiness] at time 01:33:28.833585 duration_in_ms=34.282
2018-10-16 01:33:28,834 [salt.state       :1770][INFO    ][3232] Running state [net.core.netdev_max_backlog] at time 01:33:28.834218
2018-10-16 01:33:28,834 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-10-16 01:33:28,836 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-10-16 01:33:28,848 [salt.state       :290 ][INFO    ][3232] {'net.core.netdev_max_backlog': 261144}
2018-10-16 01:33:28,849 [salt.state       :1941][INFO    ][3232] Completed state [net.core.netdev_max_backlog] at time 01:33:28.849459 duration_in_ms=15.241
2018-10-16 01:33:28,850 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.neigh.default.gc_thresh1] at time 01:33:28.850328
2018-10-16 01:33:28,851 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-10-16 01:33:28,928 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-10-16 01:33:28,955 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-10-16 01:33:28,956 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 01:33:28.956632 duration_in_ms=106.304
2018-10-16 01:33:28,957 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.neigh.default.gc_thresh2] at time 01:33:28.957544
2018-10-16 01:33:28,958 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-10-16 01:33:29,012 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-10-16 01:33:29,032 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-10-16 01:33:29,033 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 01:33:29.033337 duration_in_ms=75.792
2018-10-16 01:33:29,033 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.neigh.default.gc_thresh3] at time 01:33:29.033910
2018-10-16 01:33:29,034 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-10-16 01:33:29,036 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-10-16 01:33:29,051 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-10-16 01:33:29,052 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 01:33:29.052218 duration_in_ms=18.307
2018-10-16 01:33:29,052 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.tcp_keepalive_intvl] at time 01:33:29.052906
2018-10-16 01:33:29,053 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-10-16 01:33:29,054 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-10-16 01:33:29,072 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-10-16 01:33:29,073 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.tcp_keepalive_intvl] at time 01:33:29.073828 duration_in_ms=20.921
2018-10-16 01:33:29,074 [salt.state       :1770][INFO    ][3232] Running state [net.ipv4.tcp_keepalive_time] at time 01:33:29.074671
2018-10-16 01:33:29,075 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-10-16 01:33:29,077 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-10-16 01:33:29,092 [salt.state       :290 ][INFO    ][3232] {'net.ipv4.tcp_keepalive_time': 30}
2018-10-16 01:33:29,092 [salt.state       :1941][INFO    ][3232] Completed state [net.ipv4.tcp_keepalive_time] at time 01:33:29.092749 duration_in_ms=18.079
2018-10-16 01:33:29,093 [salt.state       :1770][INFO    ][3232] Running state [kernel.panic] at time 01:33:29.093266
2018-10-16 01:33:29,093 [salt.state       :1803][INFO    ][3232] Executing state sysctl.present for [kernel.panic]
2018-10-16 01:33:29,227 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-10-16 01:33:29,245 [salt.state       :290 ][INFO    ][3232] {'kernel.panic': 60}
2018-10-16 01:33:29,246 [salt.state       :1941][INFO    ][3232] Completed state [kernel.panic] at time 01:33:29.246427 duration_in_ms=153.161
2018-10-16 01:33:29,253 [salt.state       :1770][INFO    ][3232] Running state [linux_sysfs_package] at time 01:33:29.253011
2018-10-16 01:33:29,253 [salt.state       :1803][INFO    ][3232] Executing state pkg.installed for [linux_sysfs_package]
2018-10-16 01:33:29,310 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013329298080
2018-10-16 01:33:29,342 [salt.minion      :1431][INFO    ][4563] Starting a new job with PID 4563
2018-10-16 01:33:29,362 [salt.minion      :1708][INFO    ][4563] Returning information for job: 20181016013329298080
2018-10-16 01:33:29,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-10-16 01:33:29,963 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 01:33:31,808 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 01:33:31,834 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-10-16 01:33:39,430 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013339413072
2018-10-16 01:33:39,452 [salt.minion      :1431][INFO    ][5007] Starting a new job with PID 5007
2018-10-16 01:33:39,468 [salt.minion      :1708][INFO    ][5007] Returning information for job: 20181016013339413072
2018-10-16 01:33:49,401 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:33:49,440 [salt.state       :290 ][INFO    ][3232] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-10-16 01:33:49,453 [salt.state       :905 ][INFO    ][3232] Loading fresh modules for state activity
2018-10-16 01:33:49,481 [salt.state       :1941][INFO    ][3232] Completed state [linux_sysfs_package] at time 01:33:49.481627 duration_in_ms=20228.615
2018-10-16 01:33:49,486 [salt.state       :1770][INFO    ][3232] Running state [/etc/sysfs.d] at time 01:33:49.486462
2018-10-16 01:33:49,486 [salt.state       :1803][INFO    ][3232] Executing state file.directory for [/etc/sysfs.d]
2018-10-16 01:33:49,490 [salt.state       :290 ][INFO    ][3232] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-10-16 01:33:49,491 [salt.state       :1941][INFO    ][3232] Completed state [/etc/sysfs.d] at time 01:33:49.491377 duration_in_ms=4.914
2018-10-16 01:33:49,848 [salt.state       :1770][INFO    ][3232] Running state [ondemand] at time 01:33:49.848811
2018-10-16 01:33:49,849 [salt.state       :1803][INFO    ][3232] Executing state service.dead for [ondemand]
2018-10-16 01:33:49,850 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-10-16 01:33:49,864 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-16 01:33:49,876 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-16 01:33:49,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-10-16 01:33:49,922 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013349617803
2018-10-16 01:33:49,933 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-16 01:33:49,950 [salt.minion      :1431][INFO    ][5408] Starting a new job with PID 5408
2018-10-16 01:33:49,954 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-16 01:33:49,972 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-16 01:33:49,976 [salt.minion      :1708][INFO    ][5408] Returning information for job: 20181016013349617803
2018-10-16 01:33:49,991 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-10-16 01:33:50,187 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-16 01:33:50,205 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'runlevel' in directory '/root'
2018-10-16 01:33:50,216 [salt.state       :290 ][INFO    ][3232] {'ondemand': True}
2018-10-16 01:33:50,216 [salt.state       :1941][INFO    ][3232] Completed state [ondemand] at time 01:33:50.216590 duration_in_ms=367.78
2018-10-16 01:33:50,217 [salt.state       :1770][INFO    ][3232] Running state [en_US.UTF-8] at time 01:33:50.217586
2018-10-16 01:33:50,218 [salt.state       :1803][INFO    ][3232] Executing state locale.present for [en_US.UTF-8]
2018-10-16 01:33:50,218 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'locale -a' in directory '/root'
2018-10-16 01:33:50,228 [salt.state       :290 ][INFO    ][3232] Locale en_US.UTF-8 is already present
2018-10-16 01:33:50,228 [salt.state       :1941][INFO    ][3232] Completed state [en_US.UTF-8] at time 01:33:50.228795 duration_in_ms=11.209
2018-10-16 01:33:50,230 [salt.state       :1770][INFO    ][3232] Running state [en_US.UTF-8] at time 01:33:50.230330
2018-10-16 01:33:50,230 [salt.state       :1803][INFO    ][3232] Executing state locale.system for [en_US.UTF-8]
2018-10-16 01:33:50,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'localectl' in directory '/root'
2018-10-16 01:33:50,633 [salt.state       :290 ][INFO    ][3232] System locale en_US.UTF-8 already set
2018-10-16 01:33:50,635 [salt.state       :1941][INFO    ][3232] Completed state [en_US.UTF-8] at time 01:33:50.635288 duration_in_ms=404.958
2018-10-16 01:33:50,637 [salt.state       :1770][INFO    ][3232] Running state [root] at time 01:33:50.637018
2018-10-16 01:33:50,637 [salt.state       :1803][INFO    ][3232] Executing state group.present for [root]
2018-10-16 01:33:50,638 [salt.state       :290 ][INFO    ][3232] Group root is present and up to date
2018-10-16 01:33:50,638 [salt.state       :1941][INFO    ][3232] Completed state [root] at time 01:33:50.638471 duration_in_ms=1.452
2018-10-16 01:33:50,640 [salt.state       :1770][INFO    ][3232] Running state [root] at time 01:33:50.640839
2018-10-16 01:33:50,641 [salt.state       :1803][INFO    ][3232] Executing state user.present for [root]
2018-10-16 01:33:50,644 [salt.state       :290 ][INFO    ][3232] User root is present and up to date
2018-10-16 01:33:50,645 [salt.state       :1941][INFO    ][3232] Completed state [root] at time 01:33:50.645241 duration_in_ms=4.402
2018-10-16 01:33:50,646 [salt.state       :1770][INFO    ][3232] Running state [/root] at time 01:33:50.646128
2018-10-16 01:33:50,646 [salt.state       :1803][INFO    ][3232] Executing state file.directory for [/root]
2018-10-16 01:33:50,647 [salt.state       :290 ][INFO    ][3232] Directory /root is in the correct state
Directory /root updated
2018-10-16 01:33:50,647 [salt.state       :1941][INFO    ][3232] Completed state [/root] at time 01:33:50.647743 duration_in_ms=1.615
2018-10-16 01:33:50,648 [salt.state       :1770][INFO    ][3232] Running state [/etc/sudoers.d/90-salt-user-root] at time 01:33:50.648072
2018-10-16 01:33:50,648 [salt.state       :1803][INFO    ][3232] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-10-16 01:33:50,648 [salt.state       :290 ][INFO    ][3232] File /etc/sudoers.d/90-salt-user-root is not present
2018-10-16 01:33:50,649 [salt.state       :1941][INFO    ][3232] Completed state [/etc/sudoers.d/90-salt-user-root] at time 01:33:50.649131 duration_in_ms=1.059
2018-10-16 01:33:50,649 [salt.state       :1770][INFO    ][3232] Running state [ubuntu] at time 01:33:50.649453
2018-10-16 01:33:50,649 [salt.state       :1803][INFO    ][3232] Executing state group.present for [ubuntu]
2018-10-16 01:33:50,650 [salt.state       :290 ][INFO    ][3232] Group ubuntu is present and up to date
2018-10-16 01:33:50,650 [salt.state       :1941][INFO    ][3232] Completed state [ubuntu] at time 01:33:50.650567 duration_in_ms=1.114
2018-10-16 01:33:50,651 [salt.state       :1770][INFO    ][3232] Running state [ubuntu] at time 01:33:50.651352
2018-10-16 01:33:50,651 [salt.state       :1803][INFO    ][3232] Executing state user.present for [ubuntu]
2018-10-16 01:33:50,654 [salt.state       :290 ][INFO    ][3232] {'passwd': 'XXX-REDACTED-XXX'}
2018-10-16 01:33:50,654 [salt.state       :1941][INFO    ][3232] Completed state [ubuntu] at time 01:33:50.654703 duration_in_ms=3.351
2018-10-16 01:33:50,655 [salt.state       :1770][INFO    ][3232] Running state [/home/ubuntu] at time 01:33:50.655563
2018-10-16 01:33:50,655 [salt.state       :1803][INFO    ][3232] Executing state file.directory for [/home/ubuntu]
2018-10-16 01:33:50,656 [salt.state       :290 ][INFO    ][3232] {'mode': '0700'}
2018-10-16 01:33:50,657 [salt.state       :1941][INFO    ][3232] Completed state [/home/ubuntu] at time 01:33:50.657099 duration_in_ms=1.536
2018-10-16 01:33:50,657 [salt.state       :1770][INFO    ][3232] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 01:33:50.657844
2018-10-16 01:33:50,658 [salt.state       :1803][INFO    ][3232] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-10-16 01:33:50,674 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-10-16 01:33:50,684 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.IajqIl' in directory '/root'
2018-10-16 01:33:50,790 [salt.state       :290 ][INFO    ][3232] File changed:
New file
2018-10-16 01:33:50,792 [salt.state       :1941][INFO    ][3232] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 01:33:50.792071 duration_in_ms=134.226
2018-10-16 01:33:50,793 [salt.state       :1770][INFO    ][3232] Running state [/etc/security/limits.d/90-salt-default.conf] at time 01:33:50.792944
2018-10-16 01:33:50,793 [salt.state       :1803][INFO    ][3232] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-10-16 01:33:50,818 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-10-16 01:33:50,888 [salt.state       :290 ][INFO    ][3232] File changed:
New file
2018-10-16 01:33:50,889 [salt.state       :1941][INFO    ][3232] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 01:33:50.889043 duration_in_ms=96.099
2018-10-16 01:33:50,889 [salt.state       :1770][INFO    ][3232] Running state [apt-daily.timer] at time 01:33:50.889363
2018-10-16 01:33:50,889 [salt.state       :1803][INFO    ][3232] Executing state service.dead for [apt-daily.timer]
2018-10-16 01:33:50,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'status', 'apt-daily.timer', '-n', '0'] in directory '/root'
2018-10-16 01:33:50,915 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-10-16 01:33:50,928 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-10-16 01:33:50,946 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'apt-daily.timer'] in directory '/root'
2018-10-16 01:33:50,970 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-10-16 01:33:50,985 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-10-16 01:33:51,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-10-16 01:33:51,027 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'apt-daily.timer'] in directory '/root'
2018-10-16 01:33:51,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-10-16 01:33:51,155 [salt.state       :290 ][INFO    ][3232] {'apt-daily.timer': True}
2018-10-16 01:33:51,156 [salt.state       :1941][INFO    ][3232] Completed state [apt-daily.timer] at time 01:33:51.156104 duration_in_ms=266.741
2018-10-16 01:33:51,156 [salt.state       :1770][INFO    ][3232] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 01:33:51.156459
2018-10-16 01:33:51,156 [salt.state       :1803][INFO    ][3232] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-10-16 01:33:51,173 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-10-16 01:33:51,242 [salt.state       :290 ][INFO    ][3232] File changed:
New file
2018-10-16 01:33:51,242 [salt.state       :1941][INFO    ][3232] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 01:33:51.242341 duration_in_ms=85.881
2018-10-16 01:33:51,244 [salt.state       :1770][INFO    ][3232] Running state [service.systemctl_reload] at time 01:33:51.244150
2018-10-16 01:33:51,244 [salt.state       :1803][INFO    ][3232] Executing state module.wait for [service.systemctl_reload]
2018-10-16 01:33:51,244 [salt.state       :290 ][INFO    ][3232] No changes made for service.systemctl_reload
2018-10-16 01:33:51,244 [salt.state       :1941][INFO    ][3232] Completed state [service.systemctl_reload] at time 01:33:51.244738 duration_in_ms=0.588
2018-10-16 01:33:51,244 [salt.state       :1770][INFO    ][3232] Running state [service.systemctl_reload] at time 01:33:51.244889
2018-10-16 01:33:51,245 [salt.state       :1803][INFO    ][3232] Executing state module.mod_watch for [service.systemctl_reload]
2018-10-16 01:33:51,245 [salt.utils.decorators:613 ][WARNING ][3232] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-16 01:33:51,245 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-10-16 01:33:51,338 [salt.state       :290 ][INFO    ][3232] {'ret': True}
2018-10-16 01:33:51,339 [salt.state       :1941][INFO    ][3232] Completed state [service.systemctl_reload] at time 01:33:51.338988 duration_in_ms=94.099
2018-10-16 01:33:51,339 [salt.state       :1770][INFO    ][3232] Running state [/etc/issue] at time 01:33:51.339396
2018-10-16 01:33:51,339 [salt.state       :1803][INFO    ][3232] Executing state file.managed for [/etc/issue]
2018-10-16 01:33:51,347 [salt.state       :290 ][INFO    ][3232] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-10-16 01:33:51,348 [salt.state       :1941][INFO    ][3232] Completed state [/etc/issue] at time 01:33:51.348007 duration_in_ms=8.611
2018-10-16 01:33:51,348 [salt.state       :1770][INFO    ][3232] Running state [/etc/hostname] at time 01:33:51.348248
2018-10-16 01:33:51,348 [salt.state       :1803][INFO    ][3232] Executing state file.managed for [/etc/hostname]
2018-10-16 01:33:51,366 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-10-16 01:33:51,376 [salt.state       :290 ][INFO    ][3232] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb01

2018-10-16 01:33:51,376 [salt.state       :1941][INFO    ][3232] Completed state [/etc/hostname] at time 01:33:51.376880 duration_in_ms=28.631
2018-10-16 01:33:51,379 [salt.state       :1770][INFO    ][3232] Running state [hostname mdb01] at time 01:33:51.379154
2018-10-16 01:33:51,379 [salt.state       :1803][INFO    ][3232] Executing state cmd.run for [hostname mdb01]
2018-10-16 01:33:51,380 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'test "$(hostname)" = "mdb01"' in directory '/root'
2018-10-16 01:33:51,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command 'hostname mdb01' in directory '/root'
2018-10-16 01:33:51,406 [salt.state       :290 ][INFO    ][3232] {'pid': 5584, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-16 01:33:51,407 [salt.state       :1941][INFO    ][3232] Completed state [hostname mdb01] at time 01:33:51.407439 duration_in_ms=28.284
2018-10-16 01:33:51,409 [salt.state       :1770][INFO    ][3232] Running state [mdb02] at time 01:33:51.408956
2018-10-16 01:33:51,409 [salt.state       :1803][INFO    ][3232] Executing state host.present for [mdb02]
2018-10-16 01:33:51,411 [salt.state       :290 ][INFO    ][3232] {'host': 'mdb02'}
2018-10-16 01:33:51,411 [salt.state       :1941][INFO    ][3232] Completed state [mdb02] at time 01:33:51.411764 duration_in_ms=2.808
2018-10-16 01:33:51,412 [salt.state       :1770][INFO    ][3232] Running state [mdb02.mcp-ovs-dpdk-ha.local] at time 01:33:51.412196
2018-10-16 01:33:51,412 [salt.state       :1803][INFO    ][3232] Executing state host.present for [mdb02.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,479 [salt.state       :290 ][INFO    ][3232] {'host': 'mdb02.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,480 [salt.state       :1941][INFO    ][3232] Completed state [mdb02.mcp-ovs-dpdk-ha.local] at time 01:33:51.480108 duration_in_ms=67.911
2018-10-16 01:33:51,480 [salt.state       :1770][INFO    ][3232] Running state [mdb03] at time 01:33:51.480680
2018-10-16 01:33:51,481 [salt.state       :1803][INFO    ][3232] Executing state host.present for [mdb03]
2018-10-16 01:33:51,491 [salt.state       :290 ][INFO    ][3232] {'host': 'mdb03'}
2018-10-16 01:33:51,491 [salt.state       :1941][INFO    ][3232] Completed state [mdb03] at time 01:33:51.491744 duration_in_ms=11.064
2018-10-16 01:33:51,492 [salt.state       :1770][INFO    ][3232] Running state [mdb03.mcp-ovs-dpdk-ha.local] at time 01:33:51.492147
2018-10-16 01:33:51,492 [salt.state       :1803][INFO    ][3232] Executing state host.present for [mdb03.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,545 [salt.state       :290 ][INFO    ][3232] {'host': 'mdb03.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,546 [salt.state       :1941][INFO    ][3232] Completed state [mdb03.mcp-ovs-dpdk-ha.local] at time 01:33:51.546037 duration_in_ms=53.888
2018-10-16 01:33:51,546 [salt.state       :1770][INFO    ][3232] Running state [mdb01] at time 01:33:51.546849
2018-10-16 01:33:51,547 [salt.state       :1803][INFO    ][3232] Executing state host.present for [mdb01]
2018-10-16 01:33:51,551 [salt.state       :290 ][INFO    ][3232] {'host': 'mdb01'}
2018-10-16 01:33:51,551 [salt.state       :1941][INFO    ][3232] Completed state [mdb01] at time 01:33:51.551713 duration_in_ms=4.865
2018-10-16 01:33:51,552 [salt.state       :1770][INFO    ][3232] Running state [mdb01.mcp-ovs-dpdk-ha.local] at time 01:33:51.552250
2018-10-16 01:33:51,552 [salt.state       :1803][INFO    ][3232] Executing state host.present for [mdb01.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,557 [salt.state       :290 ][INFO    ][3232] {'host': 'mdb01.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,557 [salt.state       :1941][INFO    ][3232] Completed state [mdb01.mcp-ovs-dpdk-ha.local] at time 01:33:51.557793 duration_in_ms=5.543
2018-10-16 01:33:51,558 [salt.state       :1770][INFO    ][3232] Running state [mdb] at time 01:33:51.558468
2018-10-16 01:33:51,559 [salt.state       :1803][INFO    ][3232] Executing state host.present for [mdb]
2018-10-16 01:33:51,566 [salt.state       :290 ][INFO    ][3232] {'host': 'mdb'}
2018-10-16 01:33:51,566 [salt.state       :1941][INFO    ][3232] Completed state [mdb] at time 01:33:51.566698 duration_in_ms=8.231
2018-10-16 01:33:51,567 [salt.state       :1770][INFO    ][3232] Running state [mdb.mcp-ovs-dpdk-ha.local] at time 01:33:51.567006
2018-10-16 01:33:51,567 [salt.state       :1803][INFO    ][3232] Executing state host.present for [mdb.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,569 [salt.state       :290 ][INFO    ][3232] {'host': 'mdb.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,569 [salt.state       :1941][INFO    ][3232] Completed state [mdb.mcp-ovs-dpdk-ha.local] at time 01:33:51.569385 duration_in_ms=2.379
2018-10-16 01:33:51,569 [salt.state       :1770][INFO    ][3232] Running state [cfg01] at time 01:33:51.569653
2018-10-16 01:33:51,569 [salt.state       :1803][INFO    ][3232] Executing state host.present for [cfg01]
2018-10-16 01:33:51,575 [salt.state       :290 ][INFO    ][3232] {'host': 'cfg01'}
2018-10-16 01:33:51,575 [salt.state       :1941][INFO    ][3232] Completed state [cfg01] at time 01:33:51.575424 duration_in_ms=5.771
2018-10-16 01:33:51,575 [salt.state       :1770][INFO    ][3232] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 01:33:51.575685
2018-10-16 01:33:51,575 [salt.state       :1803][INFO    ][3232] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,581 [salt.state       :290 ][INFO    ][3232] {'host': 'cfg01.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,581 [salt.state       :1941][INFO    ][3232] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 01:33:51.581694 duration_in_ms=6.009
2018-10-16 01:33:51,582 [salt.state       :1770][INFO    ][3232] Running state [prx01] at time 01:33:51.582166
2018-10-16 01:33:51,582 [salt.state       :1803][INFO    ][3232] Executing state host.present for [prx01]
2018-10-16 01:33:51,587 [salt.state       :290 ][INFO    ][3232] {'host': 'prx01'}
2018-10-16 01:33:51,587 [salt.state       :1941][INFO    ][3232] Completed state [prx01] at time 01:33:51.587597 duration_in_ms=5.431
2018-10-16 01:33:51,588 [salt.state       :1770][INFO    ][3232] Running state [prx01.mcp-ovs-dpdk-ha.local] at time 01:33:51.588023
2018-10-16 01:33:51,588 [salt.state       :1803][INFO    ][3232] Executing state host.present for [prx01.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,591 [salt.state       :290 ][INFO    ][3232] {'host': 'prx01.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,592 [salt.state       :1941][INFO    ][3232] Completed state [prx01.mcp-ovs-dpdk-ha.local] at time 01:33:51.592108 duration_in_ms=4.071
2018-10-16 01:33:51,592 [salt.state       :1770][INFO    ][3232] Running state [kvm01] at time 01:33:51.592545
2018-10-16 01:33:51,592 [salt.state       :1803][INFO    ][3232] Executing state host.present for [kvm01]
2018-10-16 01:33:51,597 [salt.state       :290 ][INFO    ][3232] {'host': 'kvm01'}
2018-10-16 01:33:51,598 [salt.state       :1941][INFO    ][3232] Completed state [kvm01] at time 01:33:51.598100 duration_in_ms=5.555
2018-10-16 01:33:51,598 [salt.state       :1770][INFO    ][3232] Running state [kvm01.mcp-ovs-dpdk-ha.local] at time 01:33:51.598616
2018-10-16 01:33:51,599 [salt.state       :1803][INFO    ][3232] Executing state host.present for [kvm01.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,603 [salt.state       :290 ][INFO    ][3232] {'host': 'kvm01.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,604 [salt.state       :1941][INFO    ][3232] Completed state [kvm01.mcp-ovs-dpdk-ha.local] at time 01:33:51.604022 duration_in_ms=5.406
2018-10-16 01:33:51,604 [salt.state       :1770][INFO    ][3232] Running state [kvm03] at time 01:33:51.604370
2018-10-16 01:33:51,604 [salt.state       :1803][INFO    ][3232] Executing state host.present for [kvm03]
2018-10-16 01:33:51,609 [salt.state       :290 ][INFO    ][3232] {'host': 'kvm03'}
2018-10-16 01:33:51,610 [salt.state       :1941][INFO    ][3232] Completed state [kvm03] at time 01:33:51.609988 duration_in_ms=5.618
2018-10-16 01:33:51,610 [salt.state       :1770][INFO    ][3232] Running state [kvm03.mcp-ovs-dpdk-ha.local] at time 01:33:51.610312
2018-10-16 01:33:51,610 [salt.state       :1803][INFO    ][3232] Executing state host.present for [kvm03.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,616 [salt.state       :290 ][INFO    ][3232] {'host': 'kvm03.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,616 [salt.state       :1941][INFO    ][3232] Completed state [kvm03.mcp-ovs-dpdk-ha.local] at time 01:33:51.616372 duration_in_ms=6.059
2018-10-16 01:33:51,617 [salt.state       :1770][INFO    ][3232] Running state [kvm02] at time 01:33:51.616962
2018-10-16 01:33:51,617 [salt.state       :1803][INFO    ][3232] Executing state host.present for [kvm02]
2018-10-16 01:33:51,621 [salt.state       :290 ][INFO    ][3232] {'host': 'kvm02'}
2018-10-16 01:33:51,622 [salt.state       :1941][INFO    ][3232] Completed state [kvm02] at time 01:33:51.622188 duration_in_ms=5.227
2018-10-16 01:33:51,622 [salt.state       :1770][INFO    ][3232] Running state [kvm02.mcp-ovs-dpdk-ha.local] at time 01:33:51.622668
2018-10-16 01:33:51,623 [salt.state       :1803][INFO    ][3232] Executing state host.present for [kvm02.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,627 [salt.state       :290 ][INFO    ][3232] {'host': 'kvm02.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,628 [salt.state       :1941][INFO    ][3232] Completed state [kvm02.mcp-ovs-dpdk-ha.local] at time 01:33:51.628253 duration_in_ms=5.585
2018-10-16 01:33:51,628 [salt.state       :1770][INFO    ][3232] Running state [dbs] at time 01:33:51.628723
2018-10-16 01:33:51,629 [salt.state       :1803][INFO    ][3232] Executing state host.present for [dbs]
2018-10-16 01:33:51,634 [salt.state       :290 ][INFO    ][3232] {'host': 'dbs'}
2018-10-16 01:33:51,634 [salt.state       :1941][INFO    ][3232] Completed state [dbs] at time 01:33:51.634429 duration_in_ms=5.705
2018-10-16 01:33:51,635 [salt.state       :1770][INFO    ][3232] Running state [dbs.mcp-ovs-dpdk-ha.local] at time 01:33:51.635179
2018-10-16 01:33:51,635 [salt.state       :1803][INFO    ][3232] Executing state host.present for [dbs.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,640 [salt.state       :290 ][INFO    ][3232] {'host': 'dbs.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,640 [salt.state       :1941][INFO    ][3232] Completed state [dbs.mcp-ovs-dpdk-ha.local] at time 01:33:51.640451 duration_in_ms=5.272
2018-10-16 01:33:51,641 [salt.state       :1770][INFO    ][3232] Running state [prx] at time 01:33:51.641016
2018-10-16 01:33:51,641 [salt.state       :1803][INFO    ][3232] Executing state host.present for [prx]
2018-10-16 01:33:51,646 [salt.state       :290 ][INFO    ][3232] {'host': 'prx'}
2018-10-16 01:33:51,646 [salt.state       :1941][INFO    ][3232] Completed state [prx] at time 01:33:51.646316 duration_in_ms=5.301
2018-10-16 01:33:51,646 [salt.state       :1770][INFO    ][3232] Running state [prx.mcp-ovs-dpdk-ha.local] at time 01:33:51.646865
2018-10-16 01:33:51,647 [salt.state       :1803][INFO    ][3232] Executing state host.present for [prx.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,664 [salt.state       :290 ][INFO    ][3232] {'host': 'prx.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,664 [salt.state       :1941][INFO    ][3232] Completed state [prx.mcp-ovs-dpdk-ha.local] at time 01:33:51.664335 duration_in_ms=17.471
2018-10-16 01:33:51,664 [salt.state       :1770][INFO    ][3232] Running state [prx02] at time 01:33:51.664802
2018-10-16 01:33:51,665 [salt.state       :1803][INFO    ][3232] Executing state host.present for [prx02]
2018-10-16 01:33:51,670 [salt.state       :290 ][INFO    ][3232] {'host': 'prx02'}
2018-10-16 01:33:51,670 [salt.state       :1941][INFO    ][3232] Completed state [prx02] at time 01:33:51.670247 duration_in_ms=5.444
2018-10-16 01:33:51,670 [salt.state       :1770][INFO    ][3232] Running state [prx02.mcp-ovs-dpdk-ha.local] at time 01:33:51.670684
2018-10-16 01:33:51,671 [salt.state       :1803][INFO    ][3232] Executing state host.present for [prx02.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,676 [salt.state       :290 ][INFO    ][3232] {'host': 'prx02.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,676 [salt.state       :1941][INFO    ][3232] Completed state [prx02.mcp-ovs-dpdk-ha.local] at time 01:33:51.676521 duration_in_ms=5.836
2018-10-16 01:33:51,677 [salt.state       :1770][INFO    ][3232] Running state [msg02] at time 01:33:51.677210
2018-10-16 01:33:51,677 [salt.state       :1803][INFO    ][3232] Executing state host.present for [msg02]
2018-10-16 01:33:51,682 [salt.state       :290 ][INFO    ][3232] {'host': 'msg02'}
2018-10-16 01:33:51,682 [salt.state       :1941][INFO    ][3232] Completed state [msg02] at time 01:33:51.682460 duration_in_ms=5.25
2018-10-16 01:33:51,683 [salt.state       :1770][INFO    ][3232] Running state [msg02.mcp-ovs-dpdk-ha.local] at time 01:33:51.683318
2018-10-16 01:33:51,683 [salt.state       :1803][INFO    ][3232] Executing state host.present for [msg02.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,688 [salt.state       :290 ][INFO    ][3232] {'host': 'msg02.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,688 [salt.state       :1941][INFO    ][3232] Completed state [msg02.mcp-ovs-dpdk-ha.local] at time 01:33:51.688467 duration_in_ms=5.15
2018-10-16 01:33:51,689 [salt.state       :1770][INFO    ][3232] Running state [msg03] at time 01:33:51.689161
2018-10-16 01:33:51,689 [salt.state       :1803][INFO    ][3232] Executing state host.present for [msg03]
2018-10-16 01:33:51,694 [salt.state       :290 ][INFO    ][3232] {'host': 'msg03'}
2018-10-16 01:33:51,694 [salt.state       :1941][INFO    ][3232] Completed state [msg03] at time 01:33:51.694391 duration_in_ms=5.23
2018-10-16 01:33:51,695 [salt.state       :1770][INFO    ][3232] Running state [msg03.mcp-ovs-dpdk-ha.local] at time 01:33:51.694988
2018-10-16 01:33:51,695 [salt.state       :1803][INFO    ][3232] Executing state host.present for [msg03.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,701 [salt.state       :290 ][INFO    ][3232] {'host': 'msg03.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,701 [salt.state       :1941][INFO    ][3232] Completed state [msg03.mcp-ovs-dpdk-ha.local] at time 01:33:51.701499 duration_in_ms=6.511
2018-10-16 01:33:51,702 [salt.state       :1770][INFO    ][3232] Running state [msg01] at time 01:33:51.702078
2018-10-16 01:33:51,702 [salt.state       :1803][INFO    ][3232] Executing state host.present for [msg01]
2018-10-16 01:33:51,707 [salt.state       :290 ][INFO    ][3232] {'host': 'msg01'}
2018-10-16 01:33:51,707 [salt.state       :1941][INFO    ][3232] Completed state [msg01] at time 01:33:51.707439 duration_in_ms=5.361
2018-10-16 01:33:51,708 [salt.state       :1770][INFO    ][3232] Running state [msg01.mcp-ovs-dpdk-ha.local] at time 01:33:51.707944
2018-10-16 01:33:51,708 [salt.state       :1803][INFO    ][3232] Executing state host.present for [msg01.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,713 [salt.state       :290 ][INFO    ][3232] {'host': 'msg01.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,713 [salt.state       :1941][INFO    ][3232] Completed state [msg01.mcp-ovs-dpdk-ha.local] at time 01:33:51.713428 duration_in_ms=5.483
2018-10-16 01:33:51,714 [salt.state       :1770][INFO    ][3232] Running state [msg] at time 01:33:51.713969
2018-10-16 01:33:51,714 [salt.state       :1803][INFO    ][3232] Executing state host.present for [msg]
2018-10-16 01:33:51,719 [salt.state       :290 ][INFO    ][3232] {'host': 'msg'}
2018-10-16 01:33:51,719 [salt.state       :1941][INFO    ][3232] Completed state [msg] at time 01:33:51.719274 duration_in_ms=5.305
2018-10-16 01:33:51,719 [salt.state       :1770][INFO    ][3232] Running state [msg.mcp-ovs-dpdk-ha.local] at time 01:33:51.719549
2018-10-16 01:33:51,719 [salt.state       :1803][INFO    ][3232] Executing state host.present for [msg.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,725 [salt.state       :290 ][INFO    ][3232] {'host': 'msg.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,725 [salt.state       :1941][INFO    ][3232] Completed state [msg.mcp-ovs-dpdk-ha.local] at time 01:33:51.725390 duration_in_ms=5.84
2018-10-16 01:33:51,725 [salt.state       :1770][INFO    ][3232] Running state [cfg01] at time 01:33:51.725823
2018-10-16 01:33:51,726 [salt.state       :1803][INFO    ][3232] Executing state host.present for [cfg01]
2018-10-16 01:33:51,726 [salt.state       :290 ][INFO    ][3232] Host cfg01 (10.167.4.11) already present
2018-10-16 01:33:51,726 [salt.state       :1941][INFO    ][3232] Completed state [cfg01] at time 01:33:51.726929 duration_in_ms=1.106
2018-10-16 01:33:51,727 [salt.state       :1770][INFO    ][3232] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 01:33:51.727338
2018-10-16 01:33:51,727 [salt.state       :1803][INFO    ][3232] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,728 [salt.state       :290 ][INFO    ][3232] Host cfg01.mcp-ovs-dpdk-ha.local (10.167.4.11) already present
2018-10-16 01:33:51,728 [salt.state       :1941][INFO    ][3232] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 01:33:51.728372 duration_in_ms=1.035
2018-10-16 01:33:51,728 [salt.state       :1770][INFO    ][3232] Running state [cmp002] at time 01:33:51.728767
2018-10-16 01:33:51,729 [salt.state       :1803][INFO    ][3232] Executing state host.present for [cmp002]
2018-10-16 01:33:51,731 [salt.state       :290 ][INFO    ][3232] {'host': 'cmp002'}
2018-10-16 01:33:51,731 [salt.state       :1941][INFO    ][3232] Completed state [cmp002] at time 01:33:51.731282 duration_in_ms=2.516
2018-10-16 01:33:51,731 [salt.state       :1770][INFO    ][3232] Running state [cmp002.mcp-ovs-dpdk-ha.local] at time 01:33:51.731559
2018-10-16 01:33:51,731 [salt.state       :1803][INFO    ][3232] Executing state host.present for [cmp002.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,737 [salt.state       :290 ][INFO    ][3232] {'host': 'cmp002.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,737 [salt.state       :1941][INFO    ][3232] Completed state [cmp002.mcp-ovs-dpdk-ha.local] at time 01:33:51.737676 duration_in_ms=6.116
2018-10-16 01:33:51,738 [salt.state       :1770][INFO    ][3232] Running state [cmp001] at time 01:33:51.738280
2018-10-16 01:33:51,738 [salt.state       :1803][INFO    ][3232] Executing state host.present for [cmp001]
2018-10-16 01:33:51,870 [salt.state       :290 ][INFO    ][3232] {'host': 'cmp001'}
2018-10-16 01:33:51,871 [salt.state       :1941][INFO    ][3232] Completed state [cmp001] at time 01:33:51.871114 duration_in_ms=132.834
2018-10-16 01:33:51,871 [salt.state       :1770][INFO    ][3232] Running state [cmp001.mcp-ovs-dpdk-ha.local] at time 01:33:51.871832
2018-10-16 01:33:51,872 [salt.state       :1803][INFO    ][3232] Executing state host.present for [cmp001.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:51,952 [salt.state       :290 ][INFO    ][3232] {'host': 'cmp001.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:51,952 [salt.state       :1941][INFO    ][3232] Completed state [cmp001.mcp-ovs-dpdk-ha.local] at time 01:33:51.952836 duration_in_ms=81.004
2018-10-16 01:33:51,953 [salt.state       :1770][INFO    ][3232] Running state [dbs01] at time 01:33:51.953323
2018-10-16 01:33:51,953 [salt.state       :1803][INFO    ][3232] Executing state host.present for [dbs01]
2018-10-16 01:33:52,019 [salt.state       :290 ][INFO    ][3232] {'host': 'dbs01'}
2018-10-16 01:33:52,020 [salt.state       :1941][INFO    ][3232] Completed state [dbs01] at time 01:33:52.020234 duration_in_ms=66.91
2018-10-16 01:33:52,021 [salt.state       :1770][INFO    ][3232] Running state [dbs01.mcp-ovs-dpdk-ha.local] at time 01:33:52.021005
2018-10-16 01:33:52,021 [salt.state       :1803][INFO    ][3232] Executing state host.present for [dbs01.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:52,073 [salt.state       :290 ][INFO    ][3232] {'host': 'dbs01.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:52,073 [salt.state       :1941][INFO    ][3232] Completed state [dbs01.mcp-ovs-dpdk-ha.local] at time 01:33:52.073741 duration_in_ms=52.736
2018-10-16 01:33:52,074 [salt.state       :1770][INFO    ][3232] Running state [dbs02] at time 01:33:52.074634
2018-10-16 01:33:52,075 [salt.state       :1803][INFO    ][3232] Executing state host.present for [dbs02]
2018-10-16 01:33:52,078 [salt.state       :290 ][INFO    ][3232] {'host': 'dbs02'}
2018-10-16 01:33:52,079 [salt.state       :1941][INFO    ][3232] Completed state [dbs02] at time 01:33:52.079044 duration_in_ms=4.411
2018-10-16 01:33:52,079 [salt.state       :1770][INFO    ][3232] Running state [dbs02.mcp-ovs-dpdk-ha.local] at time 01:33:52.079586
2018-10-16 01:33:52,079 [salt.state       :1803][INFO    ][3232] Executing state host.present for [dbs02.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:52,084 [salt.state       :290 ][INFO    ][3232] {'host': 'dbs02.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:52,085 [salt.state       :1941][INFO    ][3232] Completed state [dbs02.mcp-ovs-dpdk-ha.local] at time 01:33:52.085002 duration_in_ms=5.417
2018-10-16 01:33:52,085 [salt.state       :1770][INFO    ][3232] Running state [dbs03] at time 01:33:52.085552
2018-10-16 01:33:52,085 [salt.state       :1803][INFO    ][3232] Executing state host.present for [dbs03]
2018-10-16 01:33:52,090 [salt.state       :290 ][INFO    ][3232] {'host': 'dbs03'}
2018-10-16 01:33:52,090 [salt.state       :1941][INFO    ][3232] Completed state [dbs03] at time 01:33:52.090840 duration_in_ms=5.288
2018-10-16 01:33:52,091 [salt.state       :1770][INFO    ][3232] Running state [dbs03.mcp-ovs-dpdk-ha.local] at time 01:33:52.091200
2018-10-16 01:33:52,091 [salt.state       :1803][INFO    ][3232] Executing state host.present for [dbs03.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:52,096 [salt.state       :290 ][INFO    ][3232] {'host': 'dbs03.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:52,096 [salt.state       :1941][INFO    ][3232] Completed state [dbs03.mcp-ovs-dpdk-ha.local] at time 01:33:52.096820 duration_in_ms=5.62
2018-10-16 01:33:52,097 [salt.state       :1770][INFO    ][3232] Running state [mas01] at time 01:33:52.097170
2018-10-16 01:33:52,097 [salt.state       :1803][INFO    ][3232] Executing state host.present for [mas01]
2018-10-16 01:33:52,102 [salt.state       :290 ][INFO    ][3232] {'host': 'mas01'}
2018-10-16 01:33:52,102 [salt.state       :1941][INFO    ][3232] Completed state [mas01] at time 01:33:52.102933 duration_in_ms=5.762
2018-10-16 01:33:52,103 [salt.state       :1770][INFO    ][3232] Running state [mas01.mcp-ovs-dpdk-ha.local] at time 01:33:52.103541
2018-10-16 01:33:52,104 [salt.state       :1803][INFO    ][3232] Executing state host.present for [mas01.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:52,107 [salt.state       :290 ][INFO    ][3232] {'host': 'mas01.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:52,107 [salt.state       :1941][INFO    ][3232] Completed state [mas01.mcp-ovs-dpdk-ha.local] at time 01:33:52.107427 duration_in_ms=3.887
2018-10-16 01:33:52,107 [salt.state       :1770][INFO    ][3232] Running state [ctl02] at time 01:33:52.107876
2018-10-16 01:33:52,108 [salt.state       :1803][INFO    ][3232] Executing state host.present for [ctl02]
2018-10-16 01:33:52,113 [salt.state       :290 ][INFO    ][3232] {'host': 'ctl02'}
2018-10-16 01:33:52,113 [salt.state       :1941][INFO    ][3232] Completed state [ctl02] at time 01:33:52.113655 duration_in_ms=5.779
2018-10-16 01:33:52,114 [salt.state       :1770][INFO    ][3232] Running state [ctl02.mcp-ovs-dpdk-ha.local] at time 01:33:52.114288
2018-10-16 01:33:52,114 [salt.state       :1803][INFO    ][3232] Executing state host.present for [ctl02.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:52,119 [salt.state       :290 ][INFO    ][3232] {'host': 'ctl02.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:52,119 [salt.state       :1941][INFO    ][3232] Completed state [ctl02.mcp-ovs-dpdk-ha.local] at time 01:33:52.119493 duration_in_ms=5.206
2018-10-16 01:33:52,120 [salt.state       :1770][INFO    ][3232] Running state [ctl03] at time 01:33:52.119964
2018-10-16 01:33:52,120 [salt.state       :1803][INFO    ][3232] Executing state host.present for [ctl03]
2018-10-16 01:33:52,125 [salt.state       :290 ][INFO    ][3232] {'host': 'ctl03'}
2018-10-16 01:33:52,125 [salt.state       :1941][INFO    ][3232] Completed state [ctl03] at time 01:33:52.125410 duration_in_ms=5.447
2018-10-16 01:33:52,125 [salt.state       :1770][INFO    ][3232] Running state [ctl03.mcp-ovs-dpdk-ha.local] at time 01:33:52.125861
2018-10-16 01:33:52,126 [salt.state       :1803][INFO    ][3232] Executing state host.present for [ctl03.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:52,131 [salt.state       :290 ][INFO    ][3232] {'host': 'ctl03.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:52,131 [salt.state       :1941][INFO    ][3232] Completed state [ctl03.mcp-ovs-dpdk-ha.local] at time 01:33:52.131466 duration_in_ms=5.604
2018-10-16 01:33:52,131 [salt.state       :1770][INFO    ][3232] Running state [ctl01] at time 01:33:52.131912
2018-10-16 01:33:52,132 [salt.state       :1803][INFO    ][3232] Executing state host.present for [ctl01]
2018-10-16 01:33:52,137 [salt.state       :290 ][INFO    ][3232] {'host': 'ctl01'}
2018-10-16 01:33:52,137 [salt.state       :1941][INFO    ][3232] Completed state [ctl01] at time 01:33:52.137479 duration_in_ms=5.567
2018-10-16 01:33:52,138 [salt.state       :1770][INFO    ][3232] Running state [ctl01.mcp-ovs-dpdk-ha.local] at time 01:33:52.137968
2018-10-16 01:33:52,138 [salt.state       :1803][INFO    ][3232] Executing state host.present for [ctl01.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:52,143 [salt.state       :290 ][INFO    ][3232] {'host': 'ctl01.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:52,143 [salt.state       :1941][INFO    ][3232] Completed state [ctl01.mcp-ovs-dpdk-ha.local] at time 01:33:52.143523 duration_in_ms=5.555
2018-10-16 01:33:52,144 [salt.state       :1770][INFO    ][3232] Running state [ctl] at time 01:33:52.143998
2018-10-16 01:33:52,144 [salt.state       :1803][INFO    ][3232] Executing state host.present for [ctl]
2018-10-16 01:33:52,149 [salt.state       :290 ][INFO    ][3232] {'host': 'ctl'}
2018-10-16 01:33:52,149 [salt.state       :1941][INFO    ][3232] Completed state [ctl] at time 01:33:52.149505 duration_in_ms=5.507
2018-10-16 01:33:52,150 [salt.state       :1770][INFO    ][3232] Running state [ctl.mcp-ovs-dpdk-ha.local] at time 01:33:52.149966
2018-10-16 01:33:52,150 [salt.state       :1803][INFO    ][3232] Executing state host.present for [ctl.mcp-ovs-dpdk-ha.local]
2018-10-16 01:33:52,155 [salt.state       :290 ][INFO    ][3232] {'host': 'ctl.mcp-ovs-dpdk-ha.local'}
2018-10-16 01:33:52,155 [salt.state       :1941][INFO    ][3232] Completed state [ctl.mcp-ovs-dpdk-ha.local] at time 01:33:52.155519 duration_in_ms=5.553
2018-10-16 01:33:52,155 [salt.state       :1770][INFO    ][3232] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 01:33:52.155849
2018-10-16 01:33:52,156 [salt.state       :1803][INFO    ][3232] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-10-16 01:33:52,156 [salt.state       :290 ][INFO    ][3232] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-10-16 01:33:52,156 [salt.state       :1941][INFO    ][3232] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 01:33:52.156899 duration_in_ms=1.051
2018-10-16 01:33:52,158 [salt.state       :1770][INFO    ][3232] Running state [ens3] at time 01:33:52.158806
2018-10-16 01:33:52,159 [salt.state       :1803][INFO    ][3232] Executing state network.managed for [ens3]
2018-10-16 01:33:52,302 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['ifup', 'ens3'] in directory '/root'
2018-10-16 01:33:53,031 [salt.state       :290 ][INFO    ][3232] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-10-16 01:33:53,031 [salt.state       :1941][INFO    ][3232] Completed state [ens3] at time 01:33:53.031649 duration_in_ms=872.842
2018-10-16 01:33:53,032 [salt.state       :1770][INFO    ][3232] Running state [ens2] at time 01:33:53.032109
2018-10-16 01:33:53,032 [salt.state       :1803][INFO    ][3232] Executing state network.managed for [ens2]
2018-10-16 01:33:53,067 [salt.state       :290 ][INFO    ][3232] {'interface': 'Added network interface.'}
2018-10-16 01:33:53,068 [salt.state       :1941][INFO    ][3232] Completed state [ens2] at time 01:33:53.068079 duration_in_ms=35.971
2018-10-16 01:33:53,068 [salt.state       :1770][INFO    ][3232] Running state [linux_system_network] at time 01:33:53.068554
2018-10-16 01:33:53,069 [salt.state       :1803][INFO    ][3232] Executing state network.system for [linux_system_network]
2018-10-16 01:33:53,070 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-10-16 01:33:53,090 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-10-16 01:33:53,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-10-16 01:33:53,200 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-10-16 01:33:53,744 [salt.loaded.int.module.debian_ip:1970][WARNING ][3232] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-10-16 01:33:53,745 [salt.state       :290 ][INFO    ][3232] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb01\n\n+DOMAIN=mcp-ovs-dpdk-ha.local\n\n+SEARCH=maas\n'}
2018-10-16 01:33:53,745 [salt.state       :1941][INFO    ][3232] Completed state [linux_system_network] at time 01:33:53.745635 duration_in_ms=677.081
2018-10-16 01:33:53,746 [salt.state       :1770][INFO    ][3232] Running state [/etc/profile.d/proxy.sh] at time 01:33:53.745967
2018-10-16 01:33:53,746 [salt.state       :1803][INFO    ][3232] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-10-16 01:33:53,746 [salt.state       :290 ][INFO    ][3232] File /etc/profile.d/proxy.sh is not present
2018-10-16 01:33:53,747 [salt.state       :1941][INFO    ][3232] Completed state [/etc/profile.d/proxy.sh] at time 01:33:53.747063 duration_in_ms=1.096
2018-10-16 01:33:53,747 [salt.state       :1770][INFO    ][3232] Running state [/etc/apt/apt.conf.d/95proxies] at time 01:33:53.747267
2018-10-16 01:33:53,747 [salt.state       :1803][INFO    ][3232] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-10-16 01:33:53,747 [salt.state       :290 ][INFO    ][3232] File /etc/apt/apt.conf.d/95proxies is not present
2018-10-16 01:33:53,747 [salt.state       :1941][INFO    ][3232] Completed state [/etc/apt/apt.conf.d/95proxies] at time 01:33:53.747893 duration_in_ms=0.627
2018-10-16 01:33:53,749 [salt.state       :1770][INFO    ][3232] Running state [ntp] at time 01:33:53.749728
2018-10-16 01:33:53,749 [salt.state       :1803][INFO    ][3232] Executing state pkg.installed for [ntp]
2018-10-16 01:33:53,927 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 01:33:53,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-10-16 01:33:59,858 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013359844205
2018-10-16 01:33:59,879 [salt.minion      :1431][INFO    ][6419] Starting a new job with PID 6419
2018-10-16 01:33:59,895 [salt.minion      :1708][INFO    ][6419] Returning information for job: 20181016013359844205
2018-10-16 01:34:08,622 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:34:08,662 [salt.state       :290 ][INFO    ][3232] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-10-16 01:34:08,677 [salt.state       :905 ][INFO    ][3232] Loading fresh modules for state activity
2018-10-16 01:34:08,714 [salt.state       :1941][INFO    ][3232] Completed state [ntp] at time 01:34:08.714852 duration_in_ms=14965.124
2018-10-16 01:34:08,719 [salt.state       :1770][INFO    ][3232] Running state [/etc/ntp.conf] at time 01:34:08.719513
2018-10-16 01:34:08,720 [salt.state       :1803][INFO    ][3232] Executing state file.managed for [/etc/ntp.conf]
2018-10-16 01:34:08,741 [salt.fileclient  :1215][INFO    ][3232] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-10-16 01:34:08,796 [salt.state       :290 ][INFO    ][3232] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.pool.ntp.org iburst
+server 0.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-10-16 01:34:08,804 [salt.state       :1941][INFO    ][3232] Completed state [/etc/ntp.conf] at time 01:34:08.804580 duration_in_ms=85.065
2018-10-16 01:34:09,129 [salt.state       :1770][INFO    ][3232] Running state [ntp] at time 01:34:09.129827
2018-10-16 01:34:09,130 [salt.state       :1803][INFO    ][3232] Executing state service.running for [ntp]
2018-10-16 01:34:09,131 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-10-16 01:34:09,146 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-16 01:34:09,161 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-10-16 01:34:09,181 [salt.state       :290 ][INFO    ][3232] The service ntp is already running
2018-10-16 01:34:09,182 [salt.state       :1941][INFO    ][3232] Completed state [ntp] at time 01:34:09.182358 duration_in_ms=52.531
2018-10-16 01:34:09,182 [salt.state       :1770][INFO    ][3232] Running state [ntp] at time 01:34:09.182821
2018-10-16 01:34:09,183 [salt.state       :1803][INFO    ][3232] Executing state service.mod_watch for [ntp]
2018-10-16 01:34:09,184 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-16 01:34:09,198 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3232] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-10-16 01:34:09,268 [salt.state       :290 ][INFO    ][3232] {'ntp': True}
2018-10-16 01:34:09,269 [salt.state       :1941][INFO    ][3232] Completed state [ntp] at time 01:34:09.269220 duration_in_ms=86.399
2018-10-16 01:34:09,273 [salt.minion      :1708][INFO    ][3232] Returning information for job: 20181016013254009471
2018-10-16 01:34:23,550 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181016013423538838
2018-10-16 01:34:23,576 [salt.minion      :1431][INFO    ][6773] Starting a new job with PID 6773
2018-10-16 01:34:23,596 [salt.minion      :1708][INFO    ][6773] Returning information for job: 20181016013423538838
2018-10-16 01:35:06,431 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command pkg.upgrade with jid 20181016013506420535
2018-10-16 01:35:06,454 [salt.minion      :1431][INFO    ][6778] Starting a new job with PID 6778
2018-10-16 01:35:06,485 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6778] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:35:06,973 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6778] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-10-16 01:35:11,543 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013511528153
2018-10-16 01:35:11,561 [salt.minion      :1431][INFO    ][6842] Starting a new job with PID 6842
2018-10-16 01:35:11,578 [salt.minion      :1708][INFO    ][6842] Returning information for job: 20181016013511528153
2018-10-16 01:35:21,710 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013521697060
2018-10-16 01:35:21,734 [salt.minion      :1431][INFO    ][6884] Starting a new job with PID 6884
2018-10-16 01:35:21,816 [salt.minion      :1708][INFO    ][6884] Returning information for job: 20181016013521697060
2018-10-16 01:35:31,842 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013531827242
2018-10-16 01:35:31,867 [salt.minion      :1431][INFO    ][6952] Starting a new job with PID 6952
2018-10-16 01:35:31,967 [salt.minion      :1708][INFO    ][6952] Returning information for job: 20181016013531827242
2018-10-16 01:35:42,047 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013542033970
2018-10-16 01:35:42,071 [salt.minion      :1431][INFO    ][7018] Starting a new job with PID 7018
2018-10-16 01:35:42,087 [salt.minion      :1708][INFO    ][7018] Returning information for job: 20181016013542033970
2018-10-16 01:35:52,090 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013552076817
2018-10-16 01:35:52,109 [salt.minion      :1431][INFO    ][7056] Starting a new job with PID 7056
2018-10-16 01:35:52,126 [salt.minion      :1708][INFO    ][7056] Returning information for job: 20181016013552076817
2018-10-16 01:36:02,288 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013602275505
2018-10-16 01:36:02,310 [salt.minion      :1431][INFO    ][7123] Starting a new job with PID 7123
2018-10-16 01:36:02,326 [salt.minion      :1708][INFO    ][7123] Returning information for job: 20181016013602275505
2018-10-16 01:36:12,454 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013612440594
2018-10-16 01:36:12,479 [salt.minion      :1431][INFO    ][7202] Starting a new job with PID 7202
2018-10-16 01:36:12,495 [salt.minion      :1708][INFO    ][7202] Returning information for job: 20181016013612440594
2018-10-16 01:36:22,542 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013622529810
2018-10-16 01:36:22,571 [salt.minion      :1431][INFO    ][7263] Starting a new job with PID 7263
2018-10-16 01:36:22,586 [salt.minion      :1708][INFO    ][7263] Returning information for job: 20181016013622529810
2018-10-16 01:36:32,626 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013632613182
2018-10-16 01:36:32,653 [salt.minion      :1431][INFO    ][7742] Starting a new job with PID 7742
2018-10-16 01:36:32,774 [salt.minion      :1708][INFO    ][7742] Returning information for job: 20181016013632613182
2018-10-16 01:36:42,819 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013642805303
2018-10-16 01:36:42,838 [salt.minion      :1431][INFO    ][7892] Starting a new job with PID 7892
2018-10-16 01:36:42,855 [salt.minion      :1708][INFO    ][7892] Returning information for job: 20181016013642805303
2018-10-16 01:36:49,067 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6778] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:36:49,101 [salt.minion      :1708][INFO    ][6778] Returning information for job: 20181016013506420535
2018-10-16 01:37:45,774 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command test.ping with jid 20181016013745765944
2018-10-16 01:37:45,802 [salt.minion      :1431][INFO    ][8150] Starting a new job with PID 8150
2018-10-16 01:37:45,819 [salt.minion      :1708][INFO    ][8150] Returning information for job: 20181016013745765944
2018-10-16 01:38:47,423 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command state.sls with jid 20181016013847415927
2018-10-16 01:38:47,445 [salt.minion      :1431][INFO    ][8155] Starting a new job with PID 8155
2018-10-16 01:38:51,332 [salt.state       :905 ][INFO    ][8155] Loading fresh modules for state activity
2018-10-16 01:38:51,372 [salt.fileclient  :1215][INFO    ][8155] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-10-16 01:38:51,402 [salt.fileclient  :1215][INFO    ][8155] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-10-16 01:38:51,965 [salt.state       :1770][INFO    ][8155] Running state [keepalived] at time 01:38:51.965376
2018-10-16 01:38:51,966 [salt.state       :1803][INFO    ][8155] Executing state pkg.installed for [keepalived]
2018-10-16 01:38:51,967 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:38:52,366 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-10-16 01:38:52,481 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013852472675
2018-10-16 01:38:52,510 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 01:38:52,515 [salt.minion      :1431][INFO    ][8175] Starting a new job with PID 8175
2018-10-16 01:38:52,530 [salt.minion      :1708][INFO    ][8175] Returning information for job: 20181016013852472675
2018-10-16 01:38:54,230 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 01:38:54,253 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-10-16 01:39:02,541 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:39:02,579 [salt.state       :290 ][INFO    ][8155] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-10-16 01:39:02,594 [salt.state       :905 ][INFO    ][8155] Loading fresh modules for state activity
2018-10-16 01:39:02,626 [salt.state       :1941][INFO    ][8155] Completed state [keepalived] at time 01:39:02.626621 duration_in_ms=10661.245
2018-10-16 01:39:02,630 [salt.state       :1770][INFO    ][8155] Running state [lsof] at time 01:39:02.630594
2018-10-16 01:39:02,630 [salt.state       :1803][INFO    ][8155] Executing state pkg.installed for [lsof]
2018-10-16 01:39:03,031 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016013902630198
2018-10-16 01:39:03,045 [salt.minion      :1431][INFO    ][9460] Starting a new job with PID 9460
2018-10-16 01:39:03,058 [salt.minion      :1708][INFO    ][9460] Returning information for job: 20181016013902630198
2018-10-16 01:39:03,086 [salt.state       :290 ][INFO    ][8155] All specified packages are already installed
2018-10-16 01:39:03,087 [salt.state       :1941][INFO    ][8155] Completed state [lsof] at time 01:39:03.086996 duration_in_ms=456.402
2018-10-16 01:39:03,089 [salt.state       :1770][INFO    ][8155] Running state [/etc/keepalived/keepalived.conf] at time 01:39:03.089404
2018-10-16 01:39:03,089 [salt.state       :1803][INFO    ][8155] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-16 01:39:03,111 [salt.fileclient  :1215][INFO    ][8155] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-10-16 01:39:03,146 [salt.state       :290 ][INFO    ][8155] File changed:
New file
2018-10-16 01:39:03,147 [salt.state       :1941][INFO    ][8155] Completed state [/etc/keepalived/keepalived.conf] at time 01:39:03.146969 duration_in_ms=57.565
2018-10-16 01:39:03,147 [salt.state       :1770][INFO    ][8155] Running state [keepalived] at time 01:39:03.147679
2018-10-16 01:39:03,147 [salt.state       :1803][INFO    ][8155] Executing state service.running for [keepalived]
2018-10-16 01:39:03,148 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-16 01:39:03,168 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-16 01:39:03,184 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-16 01:39:03,199 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-10-16 01:39:03,289 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-16 01:39:03,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-16 01:39:03,318 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8155] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-16 01:39:03,335 [salt.state       :290 ][INFO    ][8155] {'keepalived': True}
2018-10-16 01:39:03,335 [salt.state       :1941][INFO    ][8155] Completed state [keepalived] at time 01:39:03.335694 duration_in_ms=188.014
2018-10-16 01:39:03,337 [salt.minion      :1708][INFO    ][8155] Returning information for job: 20181016013847415927
2018-10-16 01:42:00,664 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command pillar.get with jid 20181016014200653620
2018-10-16 01:42:00,690 [salt.minion      :1431][INFO    ][9530] Starting a new job with PID 9530
2018-10-16 01:42:00,698 [salt.minion      :1708][INFO    ][9530] Returning information for job: 20181016014200653620
2018-10-16 01:57:35,689 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command state.sls with jid 20181016015735682161
2018-10-16 01:57:35,713 [salt.minion      :1431][INFO    ][9585] Starting a new job with PID 9585
2018-10-16 01:57:40,421 [salt.state       :905 ][INFO    ][9585] Loading fresh modules for state activity
2018-10-16 01:57:40,723 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016015740713900
2018-10-16 01:57:40,762 [salt.minion      :1431][INFO    ][9592] Starting a new job with PID 9592
2018-10-16 01:57:40,779 [salt.minion      :1708][INFO    ][9592] Returning information for job: 20181016015740713900
2018-10-16 01:57:41,044 [salt.fileclient  :1215][INFO    ][9585] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-10-16 01:57:41,067 [salt.fileclient  :1215][INFO    ][9585] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-10-16 01:57:41,089 [salt.fileclient  :1215][INFO    ][9585] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-10-16 01:57:41,677 [salt.state       :1770][INFO    ][9585] Running state [memcached] at time 01:57:41.677500
2018-10-16 01:57:41,677 [salt.state       :1803][INFO    ][9585] Executing state pkg.installed for [memcached]
2018-10-16 01:57:41,678 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:57:42,060 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-10-16 01:57:42,193 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 01:57:45,922 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 01:57:45,947 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-10-16 01:57:50,739 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016015750730354
2018-10-16 01:57:50,759 [salt.minion      :1431][INFO    ][10377] Starting a new job with PID 10377
2018-10-16 01:57:50,777 [salt.minion      :1708][INFO    ][10377] Returning information for job: 20181016015750730354
2018-10-16 01:57:51,529 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:57:51,572 [salt.state       :290 ][INFO    ][9585] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-10-16 01:57:51,587 [salt.state       :905 ][INFO    ][9585] Loading fresh modules for state activity
2018-10-16 01:57:51,611 [salt.state       :1941][INFO    ][9585] Completed state [memcached] at time 01:57:51.611839 duration_in_ms=9934.34
2018-10-16 01:57:51,616 [salt.state       :1770][INFO    ][9585] Running state [python-memcache] at time 01:57:51.616245
2018-10-16 01:57:51,616 [salt.state       :1803][INFO    ][9585] Executing state pkg.installed for [python-memcache]
2018-10-16 01:57:52,132 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 01:57:52,157 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-10-16 01:57:54,512 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:57:54,545 [salt.state       :290 ][INFO    ][9585] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-10-16 01:57:54,559 [salt.state       :905 ][INFO    ][9585] Loading fresh modules for state activity
2018-10-16 01:57:54,583 [salt.state       :1941][INFO    ][9585] Completed state [python-memcache] at time 01:57:54.582965 duration_in_ms=2966.719
2018-10-16 01:57:54,586 [salt.state       :1770][INFO    ][9585] Running state [/etc/memcached.conf] at time 01:57:54.586114
2018-10-16 01:57:54,586 [salt.state       :1803][INFO    ][9585] Executing state file.managed for [/etc/memcached.conf]
2018-10-16 01:57:54,614 [salt.fileclient  :1215][INFO    ][9585] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-10-16 01:57:54,635 [salt.state       :290 ][INFO    ][9585] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-10-16 01:57:54,635 [salt.state       :1941][INFO    ][9585] Completed state [/etc/memcached.conf] at time 01:57:54.635510 duration_in_ms=49.395
2018-10-16 01:57:54,936 [salt.state       :1770][INFO    ][9585] Running state [memcached] at time 01:57:54.936106
2018-10-16 01:57:54,936 [salt.state       :1803][INFO    ][9585] Executing state service.running for [memcached]
2018-10-16 01:57:54,937 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-16 01:57:54,951 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-16 01:57:54,961 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-16 01:57:54,971 [salt.state       :290 ][INFO    ][9585] The service memcached is already running
2018-10-16 01:57:54,972 [salt.state       :1941][INFO    ][9585] Completed state [memcached] at time 01:57:54.972274 duration_in_ms=36.168
2018-10-16 01:57:54,972 [salt.state       :1770][INFO    ][9585] Running state [memcached] at time 01:57:54.972630
2018-10-16 01:57:54,973 [salt.state       :1803][INFO    ][9585] Executing state service.mod_watch for [memcached]
2018-10-16 01:57:54,973 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-16 01:57:54,984 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9585] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-10-16 01:57:55,004 [salt.state       :290 ][INFO    ][9585] {'memcached': True}
2018-10-16 01:57:55,007 [salt.state       :1941][INFO    ][9585] Completed state [memcached] at time 01:57:55.007676 duration_in_ms=35.046
2018-10-16 01:57:55,009 [salt.minion      :1708][INFO    ][9585] Returning information for job: 20181016015735682161
2018-10-16 01:57:55,726 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command state.sls with jid 20181016015755718196
2018-10-16 01:57:55,749 [salt.minion      :1431][INFO    ][10591] Starting a new job with PID 10591
2018-10-16 01:57:56,669 [salt.state       :905 ][INFO    ][10591] Loading fresh modules for state activity
2018-10-16 01:57:57,589 [salt.fileclient  :1215][INFO    ][10591] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-10-16 01:57:57,612 [salt.fileclient  :1215][INFO    ][10591] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-10-16 01:57:58,159 [salt.state       :1770][INFO    ][10591] Running state [haproxy] at time 01:57:58.159828
2018-10-16 01:57:58,160 [salt.state       :1803][INFO    ][10591] Executing state pkg.installed for [haproxy]
2018-10-16 01:57:58,160 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:57:58,576 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-10-16 01:57:58,708 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 01:58:00,315 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 01:58:00,341 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-10-16 01:58:00,797 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016015800786066
2018-10-16 01:58:00,815 [salt.minion      :1431][INFO    ][10965] Starting a new job with PID 10965
2018-10-16 01:58:00,829 [salt.minion      :1708][INFO    ][10965] Returning information for job: 20181016015800786066
2018-10-16 01:58:10,152 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:58:10,192 [salt.state       :290 ][INFO    ][10591] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-10-16 01:58:10,208 [salt.state       :905 ][INFO    ][10591] Loading fresh modules for state activity
2018-10-16 01:58:10,234 [salt.state       :1941][INFO    ][10591] Completed state [haproxy] at time 01:58:10.234199 duration_in_ms=12074.372
2018-10-16 01:58:10,237 [salt.state       :1770][INFO    ][10591] Running state [/etc/default/haproxy] at time 01:58:10.237529
2018-10-16 01:58:10,237 [salt.state       :1803][INFO    ][10591] Executing state file.managed for [/etc/default/haproxy]
2018-10-16 01:58:10,271 [salt.fileclient  :1215][INFO    ][10591] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-10-16 01:58:10,273 [salt.state       :290 ][INFO    ][10591] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-10-16 01:58:10,274 [salt.state       :1941][INFO    ][10591] Completed state [/etc/default/haproxy] at time 01:58:10.274107 duration_in_ms=36.577
2018-10-16 01:58:10,274 [salt.state       :1770][INFO    ][10591] Running state [/etc/haproxy/haproxy.cfg] at time 01:58:10.274457
2018-10-16 01:58:10,274 [salt.state       :1803][INFO    ][10591] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-16 01:58:10,289 [salt.fileclient  :1215][INFO    ][10591] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-10-16 01:58:10,396 [salt.state       :290 ][INFO    ][10591] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 10.167.4.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8777 check
+  server mdb02 10.167.4.33:8777 check
+  server mdb03 10.167.4.34:8777 check
+
+listen panko_api
+  bind 10.167.4.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8977 check
+  server mdb02 10.167.4.33:8977 check
+  server mdb03 10.167.4.34:8977 check
+
+listen gnocchi_api
+  bind 10.167.4.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8041 check
+  server mdb02 10.167.4.33:8041 check
+  server mdb03 10.167.4.34:8041 check
+
+listen aodh-api
+  bind 10.167.4.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 10.167.4.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 10.167.4.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-10-16 01:58:10,397 [salt.state       :1941][INFO    ][10591] Completed state [/etc/haproxy/haproxy.cfg] at time 01:58:10.397035 duration_in_ms=122.578
2018-10-16 01:58:10,397 [salt.state       :1770][INFO    ][10591] Running state [/etc/haproxy/ssl] at time 01:58:10.397312
2018-10-16 01:58:10,397 [salt.state       :1803][INFO    ][10591] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-16 01:58:10,398 [salt.state       :290 ][INFO    ][10591] {'/etc/haproxy/ssl': 'New Dir'}
2018-10-16 01:58:10,398 [salt.state       :1941][INFO    ][10591] Completed state [/etc/haproxy/ssl] at time 01:58:10.398952 duration_in_ms=1.641
2018-10-16 01:58:10,399 [salt.state       :1770][INFO    ][10591] Running state [/etc/haproxy/errors/429.http11] at time 01:58:10.399189
2018-10-16 01:58:10,399 [salt.state       :1803][INFO    ][10591] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-16 01:58:10,413 [salt.fileclient  :1215][INFO    ][10591] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-10-16 01:58:10,418 [salt.state       :290 ][INFO    ][10591] File changed:
New file
2018-10-16 01:58:10,418 [salt.state       :1941][INFO    ][10591] Completed state [/etc/haproxy/errors/429.http11] at time 01:58:10.418636 duration_in_ms=19.446
2018-10-16 01:58:10,419 [salt.state       :1770][INFO    ][10591] Running state [haproxy_status_packages] at time 01:58:10.419489
2018-10-16 01:58:10,419 [salt.state       :1803][INFO    ][10591] Executing state pkg.installed for [haproxy_status_packages]
2018-10-16 01:58:10,833 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016015810825738
2018-10-16 01:58:10,859 [salt.minion      :1431][INFO    ][11438] Starting a new job with PID 11438
2018-10-16 01:58:10,878 [salt.minion      :1708][INFO    ][11438] Returning information for job: 20181016015810825738
2018-10-16 01:58:10,898 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 01:58:10,924 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-10-16 01:58:14,337 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 01:58:14,378 [salt.state       :290 ][INFO    ][10591] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-10-16 01:58:14,391 [salt.state       :905 ][INFO    ][10591] Loading fresh modules for state activity
2018-10-16 01:58:14,413 [salt.state       :1941][INFO    ][10591] Completed state [haproxy_status_packages] at time 01:58:14.413787 duration_in_ms=3994.298
2018-10-16 01:58:14,416 [salt.state       :1770][INFO    ][10591] Running state [/usr/bin/haproxy-status.sh] at time 01:58:14.416650
2018-10-16 01:58:14,417 [salt.state       :1803][INFO    ][10591] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-16 01:58:14,439 [salt.fileclient  :1215][INFO    ][10591] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-10-16 01:58:14,463 [salt.state       :290 ][INFO    ][10591] File changed:
New file
2018-10-16 01:58:14,464 [salt.state       :1941][INFO    ][10591] Completed state [/usr/bin/haproxy-status.sh] at time 01:58:14.464219 duration_in_ms=47.569
2018-10-16 01:58:14,466 [salt.state       :1770][INFO    ][10591] Running state [net.ipv4.ip_nonlocal_bind] at time 01:58:14.466482
2018-10-16 01:58:14,466 [salt.state       :1803][INFO    ][10591] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-16 01:58:14,469 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-10-16 01:58:14,480 [salt.state       :290 ][INFO    ][10591] {'net.ipv4.ip_nonlocal_bind': 1}
2018-10-16 01:58:14,481 [salt.state       :1941][INFO    ][10591] Completed state [net.ipv4.ip_nonlocal_bind] at time 01:58:14.481074 duration_in_ms=14.591
2018-10-16 01:58:14,788 [salt.state       :1770][INFO    ][10591] Running state [haproxy] at time 01:58:14.787980
2018-10-16 01:58:14,788 [salt.state       :1803][INFO    ][10591] Executing state service.running for [haproxy]
2018-10-16 01:58:14,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-16 01:58:14,802 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-16 01:58:14,812 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-16 01:58:14,823 [salt.state       :290 ][INFO    ][10591] The service haproxy is already running
2018-10-16 01:58:14,823 [salt.state       :1941][INFO    ][10591] Completed state [haproxy] at time 01:58:14.823707 duration_in_ms=35.727
2018-10-16 01:58:14,824 [salt.state       :1770][INFO    ][10591] Running state [haproxy] at time 01:58:14.824095
2018-10-16 01:58:14,824 [salt.state       :1803][INFO    ][10591] Executing state service.mod_watch for [haproxy]
2018-10-16 01:58:14,825 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-16 01:58:14,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10591] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-10-16 01:58:14,862 [salt.state       :290 ][INFO    ][10591] {'haproxy': True}
2018-10-16 01:58:14,866 [salt.state       :1941][INFO    ][10591] Completed state [haproxy] at time 01:58:14.866438 duration_in_ms=42.342
2018-10-16 01:58:14,868 [salt.minion      :1708][INFO    ][10591] Returning information for job: 20181016015755718196
2018-10-16 01:58:15,867 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command service.status with jid 20181016015815859036
2018-10-16 01:58:15,893 [salt.minion      :1431][INFO    ][11775] Starting a new job with PID 11775
2018-10-16 01:58:16,282 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11775] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-16 01:58:16,304 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11775] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-16 01:58:16,324 [salt.minion      :1708][INFO    ][11775] Returning information for job: 20181016015815859036
2018-10-16 01:58:17,345 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command service.restart with jid 20181016015817341901
2018-10-16 01:58:17,366 [salt.minion      :1431][INFO    ][11783] Starting a new job with PID 11783
2018-10-16 01:58:17,741 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-16 01:58:17,777 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-16 01:58:17,807 [salt.minion      :1708][INFO    ][11783] Returning information for job: 20181016015817341901
2018-10-16 02:31:35,410 [salt.utils.schedule:1375][INFO    ][3131] Running scheduled job: __mine_interval
2018-10-16 02:40:47,549 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command state.sls with jid 20181016024047537404
2018-10-16 02:40:47,570 [salt.minion      :1431][INFO    ][11957] Starting a new job with PID 11957
2018-10-16 02:40:48,261 [salt.state       :905 ][INFO    ][11957] Loading fresh modules for state activity
2018-10-16 02:40:48,302 [salt.fileclient  :1215][INFO    ][11957] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-10-16 02:40:48,328 [salt.fileclient  :1215][INFO    ][11957] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-10-16 02:40:48,348 [salt.fileclient  :1215][INFO    ][11957] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-10-16 02:40:48,378 [salt.fileclient  :1215][INFO    ][11957] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-10-16 02:40:48,994 [salt.state       :1770][INFO    ][11957] Running state [redis-server] at time 02:40:48.994681
2018-10-16 02:40:48,995 [salt.state       :1803][INFO    ][11957] Executing state pkg.installed for [redis-server]
2018-10-16 02:40:48,995 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:40:49,360 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-10-16 02:40:49,487 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 02:40:51,391 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:40:51,417 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-10-16 02:40:52,579 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024052566727
2018-10-16 02:40:52,603 [salt.minion      :1431][INFO    ][12332] Starting a new job with PID 12332
2018-10-16 02:40:52,621 [salt.minion      :1708][INFO    ][12332] Returning information for job: 20181016024052566727
2018-10-16 02:40:58,823 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:40:58,858 [salt.state       :290 ][INFO    ][11957] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-10-16 02:40:58,879 [salt.state       :905 ][INFO    ][11957] Loading fresh modules for state activity
2018-10-16 02:40:58,914 [salt.state       :1941][INFO    ][11957] Completed state [redis-server] at time 02:40:58.914640 duration_in_ms=9919.959
2018-10-16 02:40:58,917 [salt.state       :1770][INFO    ][11957] Running state [vm.overcommit_memory] at time 02:40:58.917769
2018-10-16 02:40:58,918 [salt.state       :1803][INFO    ][11957] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-16 02:40:58,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-10-16 02:40:58,932 [salt.state       :290 ][INFO    ][11957] {'vm.overcommit_memory': 1}
2018-10-16 02:40:58,932 [salt.state       :1941][INFO    ][11957] Completed state [vm.overcommit_memory] at time 02:40:58.932329 duration_in_ms=14.56
2018-10-16 02:40:58,935 [salt.state       :1770][INFO    ][11957] Running state [/etc/redis/redis.conf] at time 02:40:58.935326
2018-10-16 02:40:58,935 [salt.state       :1803][INFO    ][11957] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-16 02:40:58,966 [salt.fileclient  :1215][INFO    ][11957] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-10-16 02:40:59,012 [salt.state       :290 ][INFO    ][11957] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.32
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -505,8 +505,7 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
-appendonly no
+appendonly yes
 
 # The name of the append only file (default: "appendonly.aof")
 
@@ -535,9 +534,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-10-16 02:40:59,012 [salt.state       :1941][INFO    ][11957] Completed state [/etc/redis/redis.conf] at time 02:40:59.012299 duration_in_ms=76.971
2018-10-16 02:40:59,339 [salt.state       :1770][INFO    ][11957] Running state [redis-server] at time 02:40:59.339935
2018-10-16 02:40:59,340 [salt.state       :1803][INFO    ][11957] Executing state service.running for [redis-server]
2018-10-16 02:40:59,340 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-16 02:40:59,356 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-16 02:40:59,375 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-16 02:40:59,390 [salt.state       :290 ][INFO    ][11957] The service redis-server is already running
2018-10-16 02:40:59,391 [salt.state       :1941][INFO    ][11957] Completed state [redis-server] at time 02:40:59.391628 duration_in_ms=51.693
2018-10-16 02:40:59,392 [salt.state       :1770][INFO    ][11957] Running state [redis-server] at time 02:40:59.392316
2018-10-16 02:40:59,393 [salt.state       :1803][INFO    ][11957] Executing state service.mod_watch for [redis-server]
2018-10-16 02:40:59,394 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-16 02:40:59,411 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-10-16 02:40:59,761 [salt.state       :290 ][INFO    ][11957] {'redis-server': True}
2018-10-16 02:40:59,761 [salt.state       :1941][INFO    ][11957] Completed state [redis-server] at time 02:40:59.761816 duration_in_ms=369.5
2018-10-16 02:40:59,764 [salt.state       :1770][INFO    ][11957] Running state [redis-sentinel] at time 02:40:59.764918
2018-10-16 02:40:59,766 [salt.state       :1803][INFO    ][11957] Executing state pkg.installed for [redis-sentinel]
2018-10-16 02:40:59,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:40:59,983 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-10-16 02:41:02,778 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024102766059
2018-10-16 02:41:02,795 [salt.minion      :1431][INFO    ][12995] Starting a new job with PID 12995
2018-10-16 02:41:02,816 [salt.minion      :1708][INFO    ][12995] Returning information for job: 20181016024102766059
2018-10-16 02:41:04,685 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:41:04,726 [salt.state       :290 ][INFO    ][11957] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-10-16 02:41:04,740 [salt.state       :905 ][INFO    ][11957] Loading fresh modules for state activity
2018-10-16 02:41:04,765 [salt.state       :1941][INFO    ][11957] Completed state [redis-sentinel] at time 02:41:04.765755 duration_in_ms=5000.835
2018-10-16 02:41:05,136 [salt.state       :1770][INFO    ][11957] Running state [/etc/redis/sentinel.conf] at time 02:41:05.136817
2018-10-16 02:41:05,137 [salt.state       :1803][INFO    ][11957] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-16 02:41:05,155 [salt.fileclient  :1215][INFO    ][11957] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-10-16 02:41:05,184 [salt.state       :290 ][INFO    ][11957] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.32
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 10.167.4.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-10-16 02:41:05,184 [salt.state       :1941][INFO    ][11957] Completed state [/etc/redis/sentinel.conf] at time 02:41:05.184678 duration_in_ms=47.863
2018-10-16 02:41:05,184 [salt.state       :1770][INFO    ][11957] Running state [redis-sentinel] at time 02:41:05.184957
2018-10-16 02:41:05,185 [salt.state       :1803][INFO    ][11957] Executing state service.running for [redis-sentinel]
2018-10-16 02:41:05,185 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-16 02:41:05,199 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-16 02:41:05,212 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-16 02:41:05,227 [salt.state       :290 ][INFO    ][11957] The service redis-sentinel is already running
2018-10-16 02:41:05,227 [salt.state       :1941][INFO    ][11957] Completed state [redis-sentinel] at time 02:41:05.227750 duration_in_ms=42.793
2018-10-16 02:41:05,228 [salt.state       :1770][INFO    ][11957] Running state [redis-sentinel] at time 02:41:05.228264
2018-10-16 02:41:05,228 [salt.state       :1803][INFO    ][11957] Executing state service.mod_watch for [redis-sentinel]
2018-10-16 02:41:05,229 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-16 02:41:05,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11957] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-10-16 02:41:05,482 [salt.state       :290 ][INFO    ][11957] {'redis-sentinel': True}
2018-10-16 02:41:05,483 [salt.state       :1941][INFO    ][11957] Completed state [redis-sentinel] at time 02:41:05.483302 duration_in_ms=255.036
2018-10-16 02:41:05,487 [salt.minion      :1708][INFO    ][11957] Returning information for job: 20181016024047537404
2018-10-16 02:41:06,228 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command state.sls with jid 20181016024106217368
2018-10-16 02:41:06,252 [salt.minion      :1431][INFO    ][13261] Starting a new job with PID 13261
2018-10-16 02:41:10,947 [salt.state       :905 ][INFO    ][13261] Loading fresh modules for state activity
2018-10-16 02:41:11,287 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024111275743
2018-10-16 02:41:11,308 [salt.minion      :1431][INFO    ][13274] Starting a new job with PID 13274
2018-10-16 02:41:11,322 [salt.minion      :1708][INFO    ][13274] Returning information for job: 20181016024111275743
2018-10-16 02:41:11,608 [salt.state       :1770][INFO    ][13261] Running state [redis-server] at time 02:41:11.608578
2018-10-16 02:41:11,609 [salt.state       :1803][INFO    ][13261] Executing state pkg.installed for [redis-server]
2018-10-16 02:41:11,610 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13261] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:41:11,965 [salt.state       :290 ][INFO    ][13261] All specified packages are already installed
2018-10-16 02:41:11,966 [salt.state       :1941][INFO    ][13261] Completed state [redis-server] at time 02:41:11.966335 duration_in_ms=357.756
2018-10-16 02:41:11,967 [salt.state       :1770][INFO    ][13261] Running state [vm.overcommit_memory] at time 02:41:11.967661
2018-10-16 02:41:11,968 [salt.state       :1803][INFO    ][13261] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-16 02:41:11,988 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13261] Executing command 'sysctl -n vm.overcommit_memory' in directory '/root'
2018-10-16 02:41:11,998 [salt.state       :290 ][INFO    ][13261] Sysctl value vm.overcommit_memory = 1 is already set
2018-10-16 02:41:11,999 [salt.state       :1941][INFO    ][13261] Completed state [vm.overcommit_memory] at time 02:41:11.999706 duration_in_ms=32.043
2018-10-16 02:41:12,005 [salt.state       :1770][INFO    ][13261] Running state [/etc/redis/redis.conf] at time 02:41:12.005526
2018-10-16 02:41:12,006 [salt.state       :1803][INFO    ][13261] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-16 02:41:12,063 [salt.state       :290 ][INFO    ][13261] File /etc/redis/redis.conf is in the correct state
2018-10-16 02:41:12,064 [salt.state       :1941][INFO    ][13261] Completed state [/etc/redis/redis.conf] at time 02:41:12.064289 duration_in_ms=58.763
2018-10-16 02:41:12,065 [salt.state       :1770][INFO    ][13261] Running state [redis-server] at time 02:41:12.065175
2018-10-16 02:41:12,065 [salt.state       :1803][INFO    ][13261] Executing state service.running for [redis-server]
2018-10-16 02:41:12,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13261] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-16 02:41:12,089 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13261] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-16 02:41:12,106 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13261] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-16 02:41:12,120 [salt.state       :290 ][INFO    ][13261] The service redis-server is already running
2018-10-16 02:41:12,120 [salt.state       :1941][INFO    ][13261] Completed state [redis-server] at time 02:41:12.120638 duration_in_ms=55.462
2018-10-16 02:41:12,121 [salt.state       :1770][INFO    ][13261] Running state [redis-sentinel] at time 02:41:12.121165
2018-10-16 02:41:12,121 [salt.state       :1803][INFO    ][13261] Executing state pkg.installed for [redis-sentinel]
2018-10-16 02:41:12,128 [salt.state       :290 ][INFO    ][13261] All specified packages are already installed
2018-10-16 02:41:12,128 [salt.state       :1941][INFO    ][13261] Completed state [redis-sentinel] at time 02:41:12.128649 duration_in_ms=7.483
2018-10-16 02:41:12,129 [salt.state       :1770][INFO    ][13261] Running state [/etc/redis/sentinel.conf] at time 02:41:12.129749
2018-10-16 02:41:12,130 [salt.state       :1803][INFO    ][13261] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-16 02:41:12,168 [salt.state       :290 ][INFO    ][13261] File /etc/redis/sentinel.conf is in the correct state
2018-10-16 02:41:12,169 [salt.state       :1941][INFO    ][13261] Completed state [/etc/redis/sentinel.conf] at time 02:41:12.169350 duration_in_ms=39.601
2018-10-16 02:41:12,169 [salt.state       :1770][INFO    ][13261] Running state [redis-sentinel] at time 02:41:12.169826
2018-10-16 02:41:12,170 [salt.state       :1803][INFO    ][13261] Executing state service.running for [redis-sentinel]
2018-10-16 02:41:12,170 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13261] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-16 02:41:12,192 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13261] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-16 02:41:12,206 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13261] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-16 02:41:12,222 [salt.state       :290 ][INFO    ][13261] The service redis-sentinel is already running
2018-10-16 02:41:12,223 [salt.state       :1941][INFO    ][13261] Completed state [redis-sentinel] at time 02:41:12.223156 duration_in_ms=53.329
2018-10-16 02:41:12,225 [salt.minion      :1708][INFO    ][13261] Returning information for job: 20181016024106217368
2018-10-16 02:41:27,341 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command test.ping with jid 20181016024127333298
2018-10-16 02:41:27,360 [salt.minion      :1431][INFO    ][13302] Starting a new job with PID 13302
2018-10-16 02:41:27,378 [salt.minion      :1708][INFO    ][13302] Returning information for job: 20181016024127333298
2018-10-16 02:41:27,513 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command state.sls with jid 20181016024127500035
2018-10-16 02:41:27,531 [salt.minion      :1431][INFO    ][13307] Starting a new job with PID 13307
2018-10-16 02:41:31,577 [salt.state       :905 ][INFO    ][13307] Loading fresh modules for state activity
2018-10-16 02:41:31,620 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-10-16 02:41:31,648 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-10-16 02:41:31,705 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-10-16 02:41:31,731 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-10-16 02:41:31,759 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-10-16 02:41:31,823 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-10-16 02:41:31,878 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-10-16 02:41:31,938 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-10-16 02:41:32,047 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-10-16 02:41:32,101 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-10-16 02:41:32,152 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-10-16 02:41:32,193 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-10-16 02:41:32,598 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024132585104
2018-10-16 02:41:32,620 [salt.minion      :1431][INFO    ][13339] Starting a new job with PID 13339
2018-10-16 02:41:32,635 [salt.minion      :1708][INFO    ][13339] Returning information for job: 20181016024132585104
2018-10-16 02:41:32,786 [salt.state       :1770][INFO    ][13307] Running state [apache2] at time 02:41:32.786527
2018-10-16 02:41:32,787 [salt.state       :1803][INFO    ][13307] Executing state pkg.installed for [apache2]
2018-10-16 02:41:32,788 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:41:33,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-10-16 02:41:33,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 02:41:35,585 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:41:35,613 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-10-16 02:41:42,740 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024142727367
2018-10-16 02:41:42,760 [salt.minion      :1431][INFO    ][14314] Starting a new job with PID 14314
2018-10-16 02:41:42,777 [salt.minion      :1708][INFO    ][14314] Returning information for job: 20181016024142727367
2018-10-16 02:41:52,888 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024152873665
2018-10-16 02:41:52,912 [salt.minion      :1431][INFO    ][14746] Starting a new job with PID 14746
2018-10-16 02:41:52,936 [salt.minion      :1708][INFO    ][14746] Returning information for job: 20181016024152873665
2018-10-16 02:41:54,467 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:41:54,510 [salt.state       :290 ][INFO    ][13307] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-10-16 02:41:54,524 [salt.state       :905 ][INFO    ][13307] Loading fresh modules for state activity
2018-10-16 02:41:54,547 [salt.state       :1941][INFO    ][13307] Completed state [apache2] at time 02:41:54.547254 duration_in_ms=21760.727
2018-10-16 02:41:54,551 [salt.state       :1770][INFO    ][13307] Running state [openssl] at time 02:41:54.551084
2018-10-16 02:41:54,551 [salt.state       :1803][INFO    ][13307] Executing state pkg.installed for [openssl]
2018-10-16 02:41:55,095 [salt.state       :290 ][INFO    ][13307] All specified packages are already installed
2018-10-16 02:41:55,096 [salt.state       :1941][INFO    ][13307] Completed state [openssl] at time 02:41:55.096160 duration_in_ms=545.074
2018-10-16 02:41:55,097 [salt.state       :1770][INFO    ][13307] Running state [a2enmod rewrite] at time 02:41:55.097175
2018-10-16 02:41:55,097 [salt.state       :1803][INFO    ][13307] Executing state cmd.run for [a2enmod rewrite]
2018-10-16 02:41:55,098 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command 'a2enmod rewrite' in directory '/root'
2018-10-16 02:41:55,154 [salt.state       :290 ][INFO    ][13307] {'pid': 14841, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-16 02:41:55,155 [salt.state       :1941][INFO    ][13307] Completed state [a2enmod rewrite] at time 02:41:55.155417 duration_in_ms=58.242
2018-10-16 02:41:55,156 [salt.state       :1770][INFO    ][13307] Running state [libapache2-mod-wsgi] at time 02:41:55.156491
2018-10-16 02:41:55,157 [salt.state       :1803][INFO    ][13307] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-16 02:41:55,175 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:41:55,205 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-10-16 02:42:01,436 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:42:01,474 [salt.state       :290 ][INFO    ][13307] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-10-16 02:42:01,487 [salt.state       :905 ][INFO    ][13307] Loading fresh modules for state activity
2018-10-16 02:42:01,511 [salt.state       :1941][INFO    ][13307] Completed state [libapache2-mod-wsgi] at time 02:42:01.511617 duration_in_ms=6355.127
2018-10-16 02:42:01,513 [salt.state       :1770][INFO    ][13307] Running state [a2enmod wsgi] at time 02:42:01.513779
2018-10-16 02:42:01,514 [salt.state       :1803][INFO    ][13307] Executing state cmd.run for [a2enmod wsgi]
2018-10-16 02:42:01,514 [salt.state       :290 ][INFO    ][13307] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-16 02:42:01,514 [salt.state       :1941][INFO    ][13307] Completed state [a2enmod wsgi] at time 02:42:01.514485 duration_in_ms=0.707
2018-10-16 02:42:01,517 [salt.state       :1770][INFO    ][13307] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 02:42:01.517647
2018-10-16 02:42:01,517 [salt.state       :1803][INFO    ][13307] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-16 02:42:01,546 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-10-16 02:42:01,587 [salt.state       :290 ][INFO    ][13307] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-10-16 02:42:01,588 [salt.state       :1941][INFO    ][13307] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 02:42:01.588129 duration_in_ms=70.482
2018-10-16 02:42:01,588 [salt.state       :1770][INFO    ][13307] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:42:01.588314
2018-10-16 02:42:01,588 [salt.state       :1803][INFO    ][13307] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-16 02:42:01,588 [salt.state       :290 ][INFO    ][13307] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-16 02:42:01,588 [salt.state       :1941][INFO    ][13307] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:42:01.588887 duration_in_ms=0.572
2018-10-16 02:42:01,589 [salt.state       :1770][INFO    ][13307] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 02:42:01.589046
2018-10-16 02:42:01,589 [salt.state       :1803][INFO    ][13307] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-16 02:42:01,589 [salt.state       :290 ][INFO    ][13307] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-10-16 02:42:01,589 [salt.state       :1941][INFO    ][13307] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 02:42:01.589571 duration_in_ms=0.526
2018-10-16 02:42:01,590 [salt.state       :1770][INFO    ][13307] Running state [a2enmod mpm_prefork] at time 02:42:01.590062
2018-10-16 02:42:01,590 [salt.state       :1803][INFO    ][13307] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-16 02:42:01,592 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-10-16 02:42:01,631 [salt.state       :290 ][INFO    ][13307] {'pid': 15166, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-16 02:42:01,631 [salt.state       :1941][INFO    ][13307] Completed state [a2enmod mpm_prefork] at time 02:42:01.631444 duration_in_ms=41.381
2018-10-16 02:42:01,631 [salt.state       :1770][INFO    ][13307] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:42:01.631842
2018-10-16 02:42:01,632 [salt.state       :1803][INFO    ][13307] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-16 02:42:01,632 [salt.state       :290 ][INFO    ][13307] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-16 02:42:01,632 [salt.state       :1941][INFO    ][13307] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:42:01.632696 duration_in_ms=0.854
2018-10-16 02:42:01,632 [salt.state       :1770][INFO    ][13307] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 02:42:01.632882
2018-10-16 02:42:01,633 [salt.state       :1803][INFO    ][13307] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-16 02:42:01,633 [salt.state       :290 ][INFO    ][13307] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-10-16 02:42:01,633 [salt.state       :1941][INFO    ][13307] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 02:42:01.633490 duration_in_ms=0.608
2018-10-16 02:42:01,635 [salt.state       :1770][INFO    ][13307] Running state [apache_server_service_task] at time 02:42:01.635008
2018-10-16 02:42:01,635 [salt.state       :1803][INFO    ][13307] Executing state test.show_notification for [apache_server_service_task]
2018-10-16 02:42:01,635 [salt.state       :290 ][INFO    ][13307] Running apache.server.service
2018-10-16 02:42:01,635 [salt.state       :1941][INFO    ][13307] Completed state [apache_server_service_task] at time 02:42:01.635547 duration_in_ms=0.539
2018-10-16 02:42:01,636 [salt.state       :1770][INFO    ][13307] Running state [/etc/apache2/ports.conf] at time 02:42:01.635984
2018-10-16 02:42:01,636 [salt.state       :1803][INFO    ][13307] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-16 02:42:01,651 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-10-16 02:42:01,686 [salt.state       :290 ][INFO    ][13307] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-10-16 02:42:01,686 [salt.state       :1941][INFO    ][13307] Completed state [/etc/apache2/ports.conf] at time 02:42:01.686307 duration_in_ms=50.322
2018-10-16 02:42:01,686 [salt.state       :1770][INFO    ][13307] Running state [/etc/apache2/conf-available/security.conf] at time 02:42:01.686674
2018-10-16 02:42:01,686 [salt.state       :1803][INFO    ][13307] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-16 02:42:01,701 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-10-16 02:42:01,735 [salt.state       :290 ][INFO    ][13307] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-10-16 02:42:01,735 [salt.state       :1941][INFO    ][13307] Completed state [/etc/apache2/conf-available/security.conf] at time 02:42:01.735777 duration_in_ms=49.102
2018-10-16 02:42:02,112 [salt.state       :1770][INFO    ][13307] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 02:42:02.112923
2018-10-16 02:42:02,113 [salt.state       :1803][INFO    ][13307] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-16 02:42:02,113 [salt.state       :290 ][INFO    ][13307] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-10-16 02:42:02,114 [salt.state       :1941][INFO    ][13307] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 02:42:02.113962 duration_in_ms=1.04
2018-10-16 02:42:02,114 [salt.state       :1770][INFO    ][13307] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 02:42:02.114331
2018-10-16 02:42:02,114 [salt.state       :1803][INFO    ][13307] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-16 02:42:02,131 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-10-16 02:42:02,155 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-10-16 02:42:02,202 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-10-16 02:42:02,221 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-10-16 02:42:02,281 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-10-16 02:42:02,300 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-10-16 02:42:02,320 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-10-16 02:42:02,329 [salt.state       :290 ][INFO    ][13307] File changed:
New file
2018-10-16 02:42:02,329 [salt.state       :1941][INFO    ][13307] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 02:42:02.329779 duration_in_ms=215.447
2018-10-16 02:42:02,330 [salt.state       :1770][INFO    ][13307] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 02:42:02.330176
2018-10-16 02:42:02,330 [salt.state       :1803][INFO    ][13307] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-16 02:42:02,487 [salt.state       :290 ][INFO    ][13307] File changed:
New file
2018-10-16 02:42:02,487 [salt.state       :1941][INFO    ][13307] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 02:42:02.487419 duration_in_ms=157.243
2018-10-16 02:42:02,488 [salt.state       :1770][INFO    ][13307] Running state [apache2] at time 02:42:02.488894
2018-10-16 02:42:02,489 [salt.state       :1803][INFO    ][13307] Executing state service.running for [apache2]
2018-10-16 02:42:02,489 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-16 02:42:02,509 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 02:42:02,526 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 02:42:02,543 [salt.state       :290 ][INFO    ][13307] The service apache2 is already running
2018-10-16 02:42:02,544 [salt.state       :1941][INFO    ][13307] Completed state [apache2] at time 02:42:02.544476 duration_in_ms=55.582
2018-10-16 02:42:02,545 [salt.state       :1770][INFO    ][13307] Running state [apache2] at time 02:42:02.545229
2018-10-16 02:42:02,546 [salt.state       :1803][INFO    ][13307] Executing state service.mod_watch for [apache2]
2018-10-16 02:42:02,547 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 02:42:02,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-10-16 02:42:02,714 [salt.state       :290 ][INFO    ][13307] {'apache2': True}
2018-10-16 02:42:02,715 [salt.state       :1941][INFO    ][13307] Completed state [apache2] at time 02:42:02.715604 duration_in_ms=170.375
2018-10-16 02:42:02,716 [salt.state       :1770][INFO    ][13307] Running state [/etc/apache2/conf-enabled/security.conf] at time 02:42:02.716778
2018-10-16 02:42:02,717 [salt.state       :1803][INFO    ][13307] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-16 02:42:02,723 [salt.state       :290 ][INFO    ][13307] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-10-16 02:42:02,723 [salt.state       :1941][INFO    ][13307] Completed state [/etc/apache2/conf-enabled/security.conf] at time 02:42:02.723778 duration_in_ms=7.0
2018-10-16 02:42:02,726 [salt.state       :1770][INFO    ][13307] Running state [gnocchi-common] at time 02:42:02.726553
2018-10-16 02:42:02,726 [salt.state       :1803][INFO    ][13307] Executing state pkg.installed for [gnocchi-common]
2018-10-16 02:42:02,919 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:42:02,946 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-10-16 02:42:03,043 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024203031875
2018-10-16 02:42:03,066 [salt.minion      :1431][INFO    ][15287] Starting a new job with PID 15287
2018-10-16 02:42:03,081 [salt.minion      :1708][INFO    ][15287] Returning information for job: 20181016024203031875
2018-10-16 02:42:13,204 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024213190987
2018-10-16 02:42:13,224 [salt.minion      :1431][INFO    ][15483] Starting a new job with PID 15483
2018-10-16 02:42:13,241 [salt.minion      :1708][INFO    ][15483] Returning information for job: 20181016024213190987
2018-10-16 02:42:23,359 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024223345929
2018-10-16 02:42:23,383 [salt.minion      :1431][INFO    ][15665] Starting a new job with PID 15665
2018-10-16 02:42:23,418 [salt.minion      :1708][INFO    ][15665] Returning information for job: 20181016024223345929
2018-10-16 02:42:33,389 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024233375913
2018-10-16 02:42:33,411 [salt.minion      :1431][INFO    ][15863] Starting a new job with PID 15863
2018-10-16 02:42:33,435 [salt.minion      :1708][INFO    ][15863] Returning information for job: 20181016024233375913
2018-10-16 02:42:43,545 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024243532255
2018-10-16 02:42:43,567 [salt.minion      :1431][INFO    ][16099] Starting a new job with PID 16099
2018-10-16 02:42:43,593 [salt.minion      :1708][INFO    ][16099] Returning information for job: 20181016024243532255
2018-10-16 02:42:53,706 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024253692235
2018-10-16 02:42:53,725 [salt.minion      :1431][INFO    ][16304] Starting a new job with PID 16304
2018-10-16 02:42:53,758 [salt.minion      :1708][INFO    ][16304] Returning information for job: 20181016024253692235
2018-10-16 02:43:03,872 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024303859166
2018-10-16 02:43:03,892 [salt.minion      :1431][INFO    ][16535] Starting a new job with PID 16535
2018-10-16 02:43:03,917 [salt.minion      :1708][INFO    ][16535] Returning information for job: 20181016024303859166
2018-10-16 02:43:14,033 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024314019500
2018-10-16 02:43:14,057 [salt.minion      :1431][INFO    ][17271] Starting a new job with PID 17271
2018-10-16 02:43:14,082 [salt.minion      :1708][INFO    ][17271] Returning information for job: 20181016024314019500
2018-10-16 02:43:24,204 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024324191092
2018-10-16 02:43:24,226 [salt.minion      :1431][INFO    ][17276] Starting a new job with PID 17276
2018-10-16 02:43:24,249 [salt.minion      :1708][INFO    ][17276] Returning information for job: 20181016024324191092
2018-10-16 02:43:34,371 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024334357296
2018-10-16 02:43:34,395 [salt.minion      :1431][INFO    ][17466] Starting a new job with PID 17466
2018-10-16 02:43:34,413 [salt.minion      :1708][INFO    ][17466] Returning information for job: 20181016024334357296
2018-10-16 02:43:44,532 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024344520491
2018-10-16 02:43:44,550 [salt.minion      :1431][INFO    ][17792] Starting a new job with PID 17792
2018-10-16 02:43:44,579 [salt.minion      :1708][INFO    ][17792] Returning information for job: 20181016024344520491
2018-10-16 02:43:54,706 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024354692800
2018-10-16 02:43:54,727 [salt.minion      :1431][INFO    ][18129] Starting a new job with PID 18129
2018-10-16 02:43:54,744 [salt.minion      :1708][INFO    ][18129] Returning information for job: 20181016024354692800
2018-10-16 02:44:03,031 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:44:03,073 [salt.state       :290 ][INFO    ][13307] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp4'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.3-1.0~u16.04+mcp16'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp5'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp9'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-10-16 02:44:03,089 [salt.state       :905 ][INFO    ][13307] Loading fresh modules for state activity
2018-10-16 02:44:03,118 [salt.state       :1941][INFO    ][13307] Completed state [gnocchi-common] at time 02:44:03.118793 duration_in_ms=120392.239
2018-10-16 02:44:03,121 [salt.state       :1770][INFO    ][13307] Running state [gnocchi_ssl_mysql] at time 02:44:03.121913
2018-10-16 02:44:03,122 [salt.state       :1803][INFO    ][13307] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-10-16 02:44:03,122 [salt.state       :290 ][INFO    ][13307] Running gnocchi._ssl.mysql
2018-10-16 02:44:03,123 [salt.state       :1941][INFO    ][13307] Completed state [gnocchi_ssl_mysql] at time 02:44:03.123007 duration_in_ms=1.094
2018-10-16 02:44:03,125 [salt.state       :1770][INFO    ][13307] Running state [/etc/gnocchi/gnocchi.conf] at time 02:44:03.125718
2018-10-16 02:44:03,126 [salt.state       :1803][INFO    ][13307] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-10-16 02:44:03,152 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-10-16 02:44:03,212 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-10-16 02:44:03,225 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-10-16 02:44:03,245 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-10-16 02:44:03,273 [salt.fileclient  :1215][INFO    ][13307] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-10-16 02:44:03,279 [salt.state       :290 ][INFO    ][13307] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@10.167.4.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -515,153 +316,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +480,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://10.167.4.32:6379

2018-10-16 02:44:03,280 [salt.state       :1941][INFO    ][13307] Completed state [/etc/gnocchi/gnocchi.conf] at time 02:44:03.280136 duration_in_ms=154.419
2018-10-16 02:44:03,283 [salt.state       :1770][INFO    ][13307] Running state [gnocchi-api] at time 02:44:03.283101
2018-10-16 02:44:03,283 [salt.state       :1803][INFO    ][13307] Executing state pkg.installed for [gnocchi-api]
2018-10-16 02:44:04,253 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:44:04,289 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-10-16 02:44:04,870 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024404857611
2018-10-16 02:44:04,891 [salt.minion      :1431][INFO    ][18466] Starting a new job with PID 18466
2018-10-16 02:44:04,910 [salt.minion      :1708][INFO    ][18466] Returning information for job: 20181016024404857611
2018-10-16 02:44:15,036 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024415023668
2018-10-16 02:44:15,060 [salt.minion      :1431][INFO    ][18679] Starting a new job with PID 18679
2018-10-16 02:44:15,274 [salt.minion      :1708][INFO    ][18679] Returning information for job: 20181016024415023668
2018-10-16 02:44:25,169 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:44:25,197 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024425183884
2018-10-16 02:44:25,216 [salt.state       :290 ][INFO    ][13307] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp13'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-10-16 02:44:25,227 [salt.minion      :1431][INFO    ][19322] Starting a new job with PID 19322
2018-10-16 02:44:25,235 [salt.state       :905 ][INFO    ][13307] Loading fresh modules for state activity
2018-10-16 02:44:25,243 [salt.minion      :1708][INFO    ][19322] Returning information for job: 20181016024425183884
2018-10-16 02:44:25,258 [salt.state       :1941][INFO    ][13307] Completed state [gnocchi-api] at time 02:44:25.258133 duration_in_ms=21975.032
2018-10-16 02:44:25,262 [salt.state       :1770][INFO    ][13307] Running state [gnocchi-metricd] at time 02:44:25.262240
2018-10-16 02:44:25,262 [salt.state       :1803][INFO    ][13307] Executing state pkg.installed for [gnocchi-metricd]
2018-10-16 02:44:26,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:44:26,052 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-10-16 02:44:29,963 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:44:29,998 [salt.state       :290 ][INFO    ][13307] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-10-16 02:44:30,018 [salt.state       :905 ][INFO    ][13307] Loading fresh modules for state activity
2018-10-16 02:44:30,142 [salt.state       :1941][INFO    ][13307] Completed state [gnocchi-metricd] at time 02:44:30.142729 duration_in_ms=4880.488
2018-10-16 02:44:30,148 [salt.state       :1770][INFO    ][13307] Running state [python-memcache] at time 02:44:30.148871
2018-10-16 02:44:30,149 [salt.state       :1803][INFO    ][13307] Executing state pkg.installed for [python-memcache]
2018-10-16 02:44:30,659 [salt.state       :290 ][INFO    ][13307] All specified packages are already installed
2018-10-16 02:44:30,659 [salt.state       :1941][INFO    ][13307] Completed state [python-memcache] at time 02:44:30.659633 duration_in_ms=510.762
2018-10-16 02:44:30,660 [salt.state       :1770][INFO    ][13307] Running state [gnocchi-upgrade] at time 02:44:30.660905
2018-10-16 02:44:30,661 [salt.state       :1803][INFO    ][13307] Executing state cmd.run for [gnocchi-upgrade]
2018-10-16 02:44:30,661 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-10-16 02:44:34,375 [salt.state       :290 ][INFO    ][13307] {'pid': 19606, 'retcode': 0, 'stderr': '2018-10-16 02:44:31,745 [19612] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-10-16 02:44:32,323 [19612] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@10.167.4.23/gnocchi?charset=utf8\n2018-10-16 02:44:34,251 [19612] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=10.167.4.32,port=6379,db=0>>>\n2018-10-16 02:44:34,252 [19612] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-10-16 02:44:34,375 [salt.state       :1941][INFO    ][13307] Completed state [gnocchi-upgrade] at time 02:44:34.375713 duration_in_ms=3714.808
2018-10-16 02:44:34,377 [salt.state       :1770][INFO    ][13307] Running state [wsgi_gnocchi] at time 02:44:34.377394
2018-10-16 02:44:34,377 [salt.state       :1803][INFO    ][13307] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-10-16 02:44:34,378 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-10-16 02:44:34,428 [salt.state       :290 ][INFO    ][13307] {'new': 'wsgi_gnocchi', 'old': None}
2018-10-16 02:44:34,429 [salt.state       :1941][INFO    ][13307] Completed state [wsgi_gnocchi] at time 02:44:34.429109 duration_in_ms=51.715
2018-10-16 02:44:34,431 [salt.state       :1770][INFO    ][13307] Running state [apache2] at time 02:44:34.431447
2018-10-16 02:44:34,431 [salt.state       :1803][INFO    ][13307] Executing state service.running for [apache2]
2018-10-16 02:44:34,432 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 02:44:34,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 02:44:34,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-10-16 02:44:35,369 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016024435356416
2018-10-16 02:44:35,391 [salt.minion      :1431][INFO    ][19701] Starting a new job with PID 19701
2018-10-16 02:44:35,414 [salt.minion      :1708][INFO    ][19701] Returning information for job: 20181016024435356416
2018-10-16 02:44:35,622 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 02:44:35,640 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 02:44:35,654 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 02:44:35,676 [salt.state       :290 ][INFO    ][13307] {'apache2': True}
2018-10-16 02:44:35,676 [salt.state       :1941][INFO    ][13307] Completed state [apache2] at time 02:44:35.676676 duration_in_ms=1245.229
2018-10-16 02:44:35,677 [salt.state       :1770][INFO    ][13307] Running state [gnocchi-metricd] at time 02:44:35.677755
2018-10-16 02:44:35,678 [salt.state       :1803][INFO    ][13307] Executing state service.running for [gnocchi-metricd]
2018-10-16 02:44:35,679 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-10-16 02:44:35,693 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 02:44:35,705 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 02:44:35,724 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 02:44:35,759 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 02:44:35,781 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 02:44:35,829 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 02:44:35,864 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 02:44:36,472 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13307] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 02:44:36,493 [salt.state       :290 ][INFO    ][13307] {'gnocchi-metricd': True}
2018-10-16 02:44:36,494 [salt.state       :1941][INFO    ][13307] Completed state [gnocchi-metricd] at time 02:44:36.493998 duration_in_ms=816.242
2018-10-16 02:44:36,496 [salt.minion      :1708][INFO    ][13307] Returning information for job: 20181016024127500035
2018-10-16 02:50:12,376 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command test.ping with jid 20181016025012365243
2018-10-16 02:50:12,401 [salt.minion      :1431][INFO    ][19914] Starting a new job with PID 19914
2018-10-16 02:50:12,425 [salt.minion      :1708][INFO    ][19914] Returning information for job: 20181016025012365243
2018-10-16 02:50:12,552 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command state.sls with jid 20181016025012540317
2018-10-16 02:50:12,573 [salt.minion      :1431][INFO    ][19919] Starting a new job with PID 19919
2018-10-16 02:50:16,537 [salt.state       :905 ][INFO    ][19919] Loading fresh modules for state activity
2018-10-16 02:50:16,583 [salt.fileclient  :1215][INFO    ][19919] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-10-16 02:50:16,613 [salt.fileclient  :1215][INFO    ][19919] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-10-16 02:50:17,052 [salt.fileclient  :1215][INFO    ][19919] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-10-16 02:50:17,576 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025017563564
2018-10-16 02:50:17,596 [salt.minion      :1431][INFO    ][19949] Starting a new job with PID 19949
2018-10-16 02:50:17,613 [salt.minion      :1708][INFO    ][19949] Returning information for job: 20181016025017563564
2018-10-16 02:50:18,372 [salt.state       :1770][INFO    ][19919] Running state [apache2] at time 02:50:18.372106
2018-10-16 02:50:18,372 [salt.state       :1803][INFO    ][19919] Executing state pkg.installed for [apache2]
2018-10-16 02:50:18,372 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:50:18,733 [salt.state       :290 ][INFO    ][19919] All specified packages are already installed
2018-10-16 02:50:18,734 [salt.state       :1941][INFO    ][19919] Completed state [apache2] at time 02:50:18.734119 duration_in_ms=362.014
2018-10-16 02:50:18,734 [salt.state       :1770][INFO    ][19919] Running state [openssl] at time 02:50:18.734408
2018-10-16 02:50:18,734 [salt.state       :1803][INFO    ][19919] Executing state pkg.installed for [openssl]
2018-10-16 02:50:18,739 [salt.state       :290 ][INFO    ][19919] All specified packages are already installed
2018-10-16 02:50:18,739 [salt.state       :1941][INFO    ][19919] Completed state [openssl] at time 02:50:18.739615 duration_in_ms=5.207
2018-10-16 02:50:18,740 [salt.state       :1770][INFO    ][19919] Running state [a2enmod rewrite] at time 02:50:18.739991
2018-10-16 02:50:18,740 [salt.state       :1803][INFO    ][19919] Executing state cmd.run for [a2enmod rewrite]
2018-10-16 02:50:18,740 [salt.state       :290 ][INFO    ][19919] /etc/apache2/mods-enabled/rewrite.load exists
2018-10-16 02:50:18,740 [salt.state       :1941][INFO    ][19919] Completed state [a2enmod rewrite] at time 02:50:18.740557 duration_in_ms=0.566
2018-10-16 02:50:18,740 [salt.state       :1770][INFO    ][19919] Running state [libapache2-mod-wsgi] at time 02:50:18.740826
2018-10-16 02:50:18,741 [salt.state       :1803][INFO    ][19919] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-16 02:50:18,745 [salt.state       :290 ][INFO    ][19919] All specified packages are already installed
2018-10-16 02:50:18,745 [salt.state       :1941][INFO    ][19919] Completed state [libapache2-mod-wsgi] at time 02:50:18.745793 duration_in_ms=4.967
2018-10-16 02:50:18,746 [salt.state       :1770][INFO    ][19919] Running state [a2enmod wsgi] at time 02:50:18.746074
2018-10-16 02:50:18,746 [salt.state       :1803][INFO    ][19919] Executing state cmd.run for [a2enmod wsgi]
2018-10-16 02:50:18,746 [salt.state       :290 ][INFO    ][19919] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-16 02:50:18,746 [salt.state       :1941][INFO    ][19919] Completed state [a2enmod wsgi] at time 02:50:18.746636 duration_in_ms=0.562
2018-10-16 02:50:18,750 [salt.state       :1770][INFO    ][19919] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 02:50:18.750570
2018-10-16 02:50:18,750 [salt.state       :1803][INFO    ][19919] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-16 02:50:18,895 [salt.state       :290 ][INFO    ][19919] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-10-16 02:50:18,896 [salt.state       :1941][INFO    ][19919] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 02:50:18.896129 duration_in_ms=145.56
2018-10-16 02:50:18,896 [salt.state       :1770][INFO    ][19919] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:50:18.896304
2018-10-16 02:50:18,896 [salt.state       :1803][INFO    ][19919] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-16 02:50:18,896 [salt.state       :290 ][INFO    ][19919] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-16 02:50:18,896 [salt.state       :1941][INFO    ][19919] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:50:18.896853 duration_in_ms=0.549
2018-10-16 02:50:18,897 [salt.state       :1770][INFO    ][19919] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 02:50:18.897006
2018-10-16 02:50:18,897 [salt.state       :1803][INFO    ][19919] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-16 02:50:18,897 [salt.state       :290 ][INFO    ][19919] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-10-16 02:50:18,897 [salt.state       :1941][INFO    ][19919] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 02:50:18.897493 duration_in_ms=0.486
2018-10-16 02:50:18,897 [salt.state       :1770][INFO    ][19919] Running state [a2enmod mpm_prefork] at time 02:50:18.897903
2018-10-16 02:50:18,898 [salt.state       :1803][INFO    ][19919] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-16 02:50:18,898 [salt.state       :290 ][INFO    ][19919] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-10-16 02:50:18,898 [salt.state       :1941][INFO    ][19919] Completed state [a2enmod mpm_prefork] at time 02:50:18.898468 duration_in_ms=0.566
2018-10-16 02:50:18,898 [salt.state       :1770][INFO    ][19919] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:50:18.898643
2018-10-16 02:50:18,898 [salt.state       :1803][INFO    ][19919] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-16 02:50:18,899 [salt.state       :290 ][INFO    ][19919] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-16 02:50:18,899 [salt.state       :1941][INFO    ][19919] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:50:18.899160 duration_in_ms=0.517
2018-10-16 02:50:18,899 [salt.state       :1770][INFO    ][19919] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 02:50:18.899315
2018-10-16 02:50:18,899 [salt.state       :1803][INFO    ][19919] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-16 02:50:18,899 [salt.state       :290 ][INFO    ][19919] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-10-16 02:50:18,899 [salt.state       :1941][INFO    ][19919] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 02:50:18.899823 duration_in_ms=0.508
2018-10-16 02:50:18,900 [salt.state       :1770][INFO    ][19919] Running state [apache_server_service_task] at time 02:50:18.900412
2018-10-16 02:50:18,900 [salt.state       :1803][INFO    ][19919] Executing state test.show_notification for [apache_server_service_task]
2018-10-16 02:50:18,900 [salt.state       :290 ][INFO    ][19919] Running apache.server.service
2018-10-16 02:50:18,900 [salt.state       :1941][INFO    ][19919] Completed state [apache_server_service_task] at time 02:50:18.900891 duration_in_ms=0.479
2018-10-16 02:50:18,901 [salt.state       :1770][INFO    ][19919] Running state [/etc/apache2/ports.conf] at time 02:50:18.901154
2018-10-16 02:50:18,901 [salt.state       :1803][INFO    ][19919] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-16 02:50:18,943 [salt.state       :290 ][INFO    ][19919] File /etc/apache2/ports.conf is in the correct state
2018-10-16 02:50:18,943 [salt.state       :1941][INFO    ][19919] Completed state [/etc/apache2/ports.conf] at time 02:50:18.943539 duration_in_ms=42.386
2018-10-16 02:50:18,943 [salt.state       :1770][INFO    ][19919] Running state [/etc/apache2/conf-available/security.conf] at time 02:50:18.943825
2018-10-16 02:50:18,944 [salt.state       :1803][INFO    ][19919] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-16 02:50:18,987 [salt.state       :290 ][INFO    ][19919] File /etc/apache2/conf-available/security.conf is in the correct state
2018-10-16 02:50:18,988 [salt.state       :1941][INFO    ][19919] Completed state [/etc/apache2/conf-available/security.conf] at time 02:50:18.988029 duration_in_ms=44.205
2018-10-16 02:50:18,992 [salt.state       :1770][INFO    ][19919] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 02:50:18.991998
2018-10-16 02:50:18,992 [salt.state       :1803][INFO    ][19919] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-16 02:50:18,992 [salt.state       :290 ][INFO    ][19919] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-10-16 02:50:18,992 [salt.state       :1941][INFO    ][19919] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 02:50:18.992560 duration_in_ms=0.563
2018-10-16 02:50:18,992 [salt.state       :1770][INFO    ][19919] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 02:50:18.992837
2018-10-16 02:50:18,993 [salt.state       :1803][INFO    ][19919] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-16 02:50:19,142 [salt.state       :290 ][INFO    ][19919] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-10-16 02:50:19,142 [salt.state       :1941][INFO    ][19919] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 02:50:19.142606 duration_in_ms=149.768
2018-10-16 02:50:19,143 [salt.state       :1770][INFO    ][19919] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 02:50:19.142966
2018-10-16 02:50:19,143 [salt.state       :1803][INFO    ][19919] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-16 02:50:19,303 [salt.state       :290 ][INFO    ][19919] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-10-16 02:50:19,303 [salt.state       :1941][INFO    ][19919] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 02:50:19.303215 duration_in_ms=160.249
2018-10-16 02:50:19,304 [salt.state       :1770][INFO    ][19919] Running state [apache2] at time 02:50:19.304418
2018-10-16 02:50:19,304 [salt.state       :1803][INFO    ][19919] Executing state service.running for [apache2]
2018-10-16 02:50:19,305 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-16 02:50:19,353 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 02:50:19,369 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 02:50:19,386 [salt.state       :290 ][INFO    ][19919] The service apache2 is already running
2018-10-16 02:50:19,387 [salt.state       :1941][INFO    ][19919] Completed state [apache2] at time 02:50:19.386908 duration_in_ms=82.489
2018-10-16 02:50:19,388 [salt.state       :1770][INFO    ][19919] Running state [/etc/apache2/conf-enabled/security.conf] at time 02:50:19.388294
2018-10-16 02:50:19,388 [salt.state       :1803][INFO    ][19919] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-16 02:50:19,392 [salt.state       :290 ][INFO    ][19919] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-10-16 02:50:19,392 [salt.state       :1941][INFO    ][19919] Completed state [/etc/apache2/conf-enabled/security.conf] at time 02:50:19.392672 duration_in_ms=4.377
2018-10-16 02:50:19,394 [salt.state       :1770][INFO    ][19919] Running state [panko-api] at time 02:50:19.393957
2018-10-16 02:50:19,394 [salt.state       :1803][INFO    ][19919] Executing state pkg.installed for [panko-api]
2018-10-16 02:50:19,413 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-10-16 02:50:19,538 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 02:50:26,082 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:50:26,113 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-10-16 02:50:27,722 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025027708363
2018-10-16 02:50:27,745 [salt.minion      :1431][INFO    ][20362] Starting a new job with PID 20362
2018-10-16 02:50:27,769 [salt.minion      :1708][INFO    ][20362] Returning information for job: 20181016025027708363
2018-10-16 02:50:32,870 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:50:32,916 [salt.state       :290 ][INFO    ][19919] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-10-16 02:50:32,937 [salt.state       :905 ][INFO    ][19919] Loading fresh modules for state activity
2018-10-16 02:50:32,960 [salt.state       :1941][INFO    ][19919] Completed state [panko-api] at time 02:50:32.960597 duration_in_ms=13566.64
2018-10-16 02:50:32,962 [salt.state       :1770][INFO    ][19919] Running state [panko_ssl_mysql] at time 02:50:32.962508
2018-10-16 02:50:32,962 [salt.state       :1803][INFO    ][19919] Executing state test.show_notification for [panko_ssl_mysql]
2018-10-16 02:50:32,962 [salt.state       :290 ][INFO    ][19919] Running panko._ssl.mysql
2018-10-16 02:50:32,963 [salt.state       :1941][INFO    ][19919] Completed state [panko_ssl_mysql] at time 02:50:32.963107 duration_in_ms=0.599
2018-10-16 02:50:32,964 [salt.state       :1770][INFO    ][19919] Running state [/etc/panko/panko.conf] at time 02:50:32.964531
2018-10-16 02:50:32,964 [salt.state       :1803][INFO    ][19919] Executing state file.managed for [/etc/panko/panko.conf]
2018-10-16 02:50:32,988 [salt.fileclient  :1215][INFO    ][19919] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-10-16 02:50:33,028 [salt.fileclient  :1215][INFO    ][19919] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-10-16 02:50:33,044 [salt.fileclient  :1215][INFO    ][19919] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-10-16 02:50:33,104 [salt.state       :290 ][INFO    ][19919] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@10.167.4.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -466,110 +481,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-10-16 02:50:33,104 [salt.state       :1941][INFO    ][19919] Completed state [/etc/panko/panko.conf] at time 02:50:33.104481 duration_in_ms=139.949
2018-10-16 02:50:33,106 [salt.state       :1770][INFO    ][19919] Running state [/usr/bin/panko-expirer --use-syslog] at time 02:50:33.106639
2018-10-16 02:50:33,106 [salt.state       :1803][INFO    ][19919] Executing state cron.present for [/usr/bin/panko-expirer --use-syslog]
2018-10-16 02:50:33,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command 'crontab -u panko -l' in directory '/root'
2018-10-16 02:50:33,139 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][19919] Command '['crontab', '-u', 'panko', '-l']' failed with return code: 1
2018-10-16 02:50:33,139 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][19919] stderr: no crontab for panko

2018-10-16 02:50:33,139 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][19919] retcode: 1
2018-10-16 02:50:33,140 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command 'crontab -u panko /tmp/__salt.tmp.v_9kNG' in directory '/root'
2018-10-16 02:50:33,195 [salt.state       :290 ][INFO    ][19919] {'panko': '/usr/bin/panko-expirer --use-syslog'}
2018-10-16 02:50:33,196 [salt.state       :1941][INFO    ][19919] Completed state [/usr/bin/panko-expirer --use-syslog] at time 02:50:33.196198 duration_in_ms=89.559
2018-10-16 02:50:33,198 [salt.state       :1770][INFO    ][19919] Running state [panko-dbsync] at time 02:50:33.198424
2018-10-16 02:50:33,198 [salt.state       :1803][INFO    ][19919] Executing state cmd.run for [panko-dbsync]
2018-10-16 02:50:33,199 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command 'panko-dbsync' in directory '/root'
2018-10-16 02:50:36,409 [salt.state       :290 ][INFO    ][19919] {'pid': 20566, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-16 02:50:36,410 [salt.state       :1941][INFO    ][19919] Completed state [panko-dbsync] at time 02:50:36.410635 duration_in_ms=3212.21
2018-10-16 02:50:36,416 [salt.state       :1770][INFO    ][19919] Running state [wsgi_panko] at time 02:50:36.416323
2018-10-16 02:50:36,416 [salt.state       :1803][INFO    ][19919] Executing state apache_site.enabled for [wsgi_panko]
2018-10-16 02:50:36,417 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-10-16 02:50:36,458 [salt.state       :290 ][INFO    ][19919] {'new': 'wsgi_panko', 'old': None}
2018-10-16 02:50:36,458 [salt.state       :1941][INFO    ][19919] Completed state [wsgi_panko] at time 02:50:36.458466 duration_in_ms=42.143
2018-10-16 02:50:36,827 [salt.state       :1770][INFO    ][19919] Running state [apache2] at time 02:50:36.827295
2018-10-16 02:50:36,827 [salt.state       :1803][INFO    ][19919] Executing state service.running for [apache2]
2018-10-16 02:50:36,828 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 02:50:36,842 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 02:50:36,857 [salt.state       :290 ][INFO    ][19919] The service apache2 is already running
2018-10-16 02:50:36,857 [salt.state       :1941][INFO    ][19919] Completed state [apache2] at time 02:50:36.857686 duration_in_ms=30.391
2018-10-16 02:50:36,858 [salt.state       :1770][INFO    ][19919] Running state [apache2] at time 02:50:36.858222
2018-10-16 02:50:36,858 [salt.state       :1803][INFO    ][19919] Executing state service.mod_watch for [apache2]
2018-10-16 02:50:36,859 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 02:50:36,872 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19919] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-16 02:50:37,880 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025037865910
2018-10-16 02:50:37,898 [salt.minion      :1431][INFO    ][20623] Starting a new job with PID 20623
2018-10-16 02:50:37,918 [salt.minion      :1708][INFO    ][20623] Returning information for job: 20181016025037865910
2018-10-16 02:50:38,179 [salt.state       :290 ][INFO    ][19919] {'apache2': True}
2018-10-16 02:50:38,179 [salt.state       :1941][INFO    ][19919] Completed state [apache2] at time 02:50:38.179413 duration_in_ms=1321.19
2018-10-16 02:50:38,181 [salt.minion      :1708][INFO    ][19919] Returning information for job: 20181016025012540317
2018-10-16 02:51:13,658 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command test.ping with jid 20181016025113650488
2018-10-16 02:51:13,681 [salt.minion      :1431][INFO    ][20726] Starting a new job with PID 20726
2018-10-16 02:51:13,698 [salt.minion      :1708][INFO    ][20726] Returning information for job: 20181016025113650488
2018-10-16 02:51:13,831 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command state.sls with jid 20181016025113818201
2018-10-16 02:51:13,853 [salt.minion      :1431][INFO    ][20731] Starting a new job with PID 20731
2018-10-16 02:51:17,764 [salt.state       :905 ][INFO    ][20731] Loading fresh modules for state activity
2018-10-16 02:51:17,808 [salt.fileclient  :1215][INFO    ][20731] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-10-16 02:51:17,836 [salt.fileclient  :1215][INFO    ][20731] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-10-16 02:51:17,945 [salt.fileclient  :1215][INFO    ][20731] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-10-16 02:51:17,990 [salt.fileclient  :1215][INFO    ][20731] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-10-16 02:51:18,914 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025118901977
2018-10-16 02:51:18,936 [salt.minion      :1431][INFO    ][20748] Starting a new job with PID 20748
2018-10-16 02:51:18,952 [salt.minion      :1708][INFO    ][20748] Returning information for job: 20181016025118901977
2018-10-16 02:51:19,268 [salt.state       :1770][INFO    ][20731] Running state [aodh-api] at time 02:51:19.268656
2018-10-16 02:51:19,269 [salt.state       :1803][INFO    ][20731] Executing state pkg.installed for [aodh-api]
2018-10-16 02:51:19,270 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:51:19,660 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-10-16 02:51:19,800 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 02:51:22,652 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:51:22,686 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-10-16 02:51:29,060 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025129047522
2018-10-16 02:51:29,080 [salt.minion      :1431][INFO    ][21245] Starting a new job with PID 21245
2018-10-16 02:51:29,112 [salt.minion      :1708][INFO    ][21245] Returning information for job: 20181016025129047522
2018-10-16 02:51:39,223 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025139209946
2018-10-16 02:51:39,245 [salt.minion      :1431][INFO    ][21400] Starting a new job with PID 21400
2018-10-16 02:51:39,275 [salt.minion      :1708][INFO    ][21400] Returning information for job: 20181016025139209946
2018-10-16 02:51:49,384 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025149370864
2018-10-16 02:51:49,405 [salt.minion      :1431][INFO    ][25780] Starting a new job with PID 25780
2018-10-16 02:51:49,449 [salt.minion      :1708][INFO    ][25780] Returning information for job: 20181016025149370864
2018-10-16 02:51:58,515 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:51:58,560 [salt.state       :290 ][INFO    ][20731] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'c++-compiler' changed from 'absent' to '1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-137.163'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev' changed from 'absent' to '1'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'binutils-gold' changed from 'absent' to '1'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-10-16 02:51:58,581 [salt.state       :905 ][INFO    ][20731] Loading fresh modules for state activity
2018-10-16 02:51:58,723 [salt.state       :1941][INFO    ][20731] Completed state [aodh-api] at time 02:51:58.723865 duration_in_ms=39455.21
2018-10-16 02:51:58,728 [salt.state       :1770][INFO    ][20731] Running state [aodh-evaluator] at time 02:51:58.728471
2018-10-16 02:51:58,728 [salt.state       :1803][INFO    ][20731] Executing state pkg.installed for [aodh-evaluator]
2018-10-16 02:51:59,225 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:51:59,257 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-10-16 02:51:59,575 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025159562848
2018-10-16 02:51:59,596 [salt.minion      :1431][INFO    ][26367] Starting a new job with PID 26367
2018-10-16 02:51:59,611 [salt.minion      :1708][INFO    ][26367] Returning information for job: 20181016025159562848
2018-10-16 02:52:03,322 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:52:03,359 [salt.state       :290 ][INFO    ][20731] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-16 02:52:03,378 [salt.state       :905 ][INFO    ][20731] Loading fresh modules for state activity
2018-10-16 02:52:03,401 [salt.state       :1941][INFO    ][20731] Completed state [aodh-evaluator] at time 02:52:03.401307 duration_in_ms=4672.836
2018-10-16 02:52:03,405 [salt.state       :1770][INFO    ][20731] Running state [aodh-notifier] at time 02:52:03.405274
2018-10-16 02:52:03,405 [salt.state       :1803][INFO    ][20731] Executing state pkg.installed for [aodh-notifier]
2018-10-16 02:52:03,978 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:52:04,013 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-10-16 02:52:07,805 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:52:07,843 [salt.state       :290 ][INFO    ][20731] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-16 02:52:07,864 [salt.state       :905 ][INFO    ][20731] Loading fresh modules for state activity
2018-10-16 02:52:07,888 [salt.state       :1941][INFO    ][20731] Completed state [aodh-notifier] at time 02:52:07.888700 duration_in_ms=4483.426
2018-10-16 02:52:07,893 [salt.state       :1770][INFO    ][20731] Running state [aodh-listener] at time 02:52:07.893012
2018-10-16 02:52:07,893 [salt.state       :1803][INFO    ][20731] Executing state pkg.installed for [aodh-listener]
2018-10-16 02:52:08,427 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:52:08,459 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-10-16 02:52:09,722 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025209709407
2018-10-16 02:52:09,743 [salt.minion      :1431][INFO    ][26984] Starting a new job with PID 26984
2018-10-16 02:52:09,769 [salt.minion      :1708][INFO    ][26984] Returning information for job: 20181016025209709407
2018-10-16 02:52:12,945 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:52:12,979 [salt.state       :290 ][INFO    ][20731] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-16 02:52:13,000 [salt.state       :905 ][INFO    ][20731] Loading fresh modules for state activity
2018-10-16 02:52:13,044 [salt.state       :1941][INFO    ][20731] Completed state [aodh-listener] at time 02:52:13.044345 duration_in_ms=5151.332
2018-10-16 02:52:13,053 [salt.state       :1770][INFO    ][20731] Running state [python-aodhclient] at time 02:52:13.053146
2018-10-16 02:52:13,053 [salt.state       :1803][INFO    ][20731] Executing state pkg.installed for [python-aodhclient]
2018-10-16 02:52:13,572 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:52:13,611 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-10-16 02:52:16,120 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:52:16,167 [salt.state       :290 ][INFO    ][20731] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-10-16 02:52:16,190 [salt.state       :905 ][INFO    ][20731] Loading fresh modules for state activity
2018-10-16 02:52:16,214 [salt.state       :1941][INFO    ][20731] Completed state [python-aodhclient] at time 02:52:16.214153 duration_in_ms=3161.006
2018-10-16 02:52:16,216 [salt.state       :1770][INFO    ][20731] Running state [aodh_ssl_mysql] at time 02:52:16.216944
2018-10-16 02:52:16,217 [salt.state       :1803][INFO    ][20731] Executing state test.show_notification for [aodh_ssl_mysql]
2018-10-16 02:52:16,217 [salt.state       :290 ][INFO    ][20731] Running aodh._ssl.mysql
2018-10-16 02:52:16,218 [salt.state       :1941][INFO    ][20731] Completed state [aodh_ssl_mysql] at time 02:52:16.218192 duration_in_ms=1.247
2018-10-16 02:52:16,218 [salt.state       :1770][INFO    ][20731] Running state [aodh_ssl_rabbitmq] at time 02:52:16.218685
2018-10-16 02:52:16,219 [salt.state       :1803][INFO    ][20731] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-10-16 02:52:16,219 [salt.state       :290 ][INFO    ][20731] Running aodh._ssl.rabbitmq
2018-10-16 02:52:16,219 [salt.state       :1941][INFO    ][20731] Completed state [aodh_ssl_rabbitmq] at time 02:52:16.219783 duration_in_ms=1.098
2018-10-16 02:52:16,222 [salt.state       :1770][INFO    ][20731] Running state [/etc/aodh/aodh.conf] at time 02:52:16.222605
2018-10-16 02:52:16,223 [salt.state       :1803][INFO    ][20731] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-10-16 02:52:16,254 [salt.fileclient  :1215][INFO    ][20731] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-10-16 02:52:16,303 [salt.fileclient  :1215][INFO    ][20731] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-10-16 02:52:16,379 [salt.fileclient  :1215][INFO    ][20731] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-10-16 02:52:16,392 [salt.fileclient  :1215][INFO    ][20731] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-10-16 02:52:16,420 [salt.state       :290 ][INFO    ][20731] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 10.167.4.32
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@10.167.4.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,291 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +862,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +878,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +916,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -775,995 +1034,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-10-16 02:52:16,431 [salt.state       :1941][INFO    ][20731] Completed state [/etc/aodh/aodh.conf] at time 02:52:16.431532 duration_in_ms=208.927
2018-10-16 02:52:16,431 [salt.state       :1770][INFO    ][20731] Running state [/etc/default/aodh-evaluator] at time 02:52:16.431920
2018-10-16 02:52:16,432 [salt.state       :1803][INFO    ][20731] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-10-16 02:52:16,451 [salt.fileclient  :1215][INFO    ][20731] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-10-16 02:52:16,465 [salt.state       :290 ][INFO    ][20731] File changed:
New file
2018-10-16 02:52:16,465 [salt.state       :1941][INFO    ][20731] Completed state [/etc/default/aodh-evaluator] at time 02:52:16.465642 duration_in_ms=33.722
2018-10-16 02:52:16,465 [salt.state       :1770][INFO    ][20731] Running state [/etc/default/aodh-notifier] at time 02:52:16.465943
2018-10-16 02:52:16,466 [salt.state       :1803][INFO    ][20731] Executing state file.managed for [/etc/default/aodh-notifier]
2018-10-16 02:52:16,513 [salt.state       :290 ][INFO    ][20731] File changed:
New file
2018-10-16 02:52:16,513 [salt.state       :1941][INFO    ][20731] Completed state [/etc/default/aodh-notifier] at time 02:52:16.513577 duration_in_ms=47.634
2018-10-16 02:52:16,513 [salt.state       :1770][INFO    ][20731] Running state [/etc/default/aodh-listener] at time 02:52:16.513912
2018-10-16 02:52:16,514 [salt.state       :1803][INFO    ][20731] Executing state file.managed for [/etc/default/aodh-listener]
2018-10-16 02:52:16,529 [salt.state       :290 ][INFO    ][20731] File changed:
New file
2018-10-16 02:52:16,529 [salt.state       :1941][INFO    ][20731] Completed state [/etc/default/aodh-listener] at time 02:52:16.529628 duration_in_ms=15.717
2018-10-16 02:52:16,534 [salt.state       :1770][INFO    ][20731] Running state [aodh-dbsync] at time 02:52:16.534772
2018-10-16 02:52:16,534 [salt.state       :1803][INFO    ][20731] Executing state cmd.run for [aodh-dbsync]
2018-10-16 02:52:16,537 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command 'aodh-dbsync' in directory '/root'
2018-10-16 02:52:19,176 [salt.state       :290 ][INFO    ][20731] {'pid': 27362, 'retcode': 0, 'stderr': '', 'stdout': '2018-10-16 02:52:17.918 27363 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-10-16 02:52:17.918 27363 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-10-16 02:52:19,177 [salt.state       :1941][INFO    ][20731] Completed state [aodh-dbsync] at time 02:52:19.177709 duration_in_ms=2642.935
2018-10-16 02:52:19,187 [salt.state       :1770][INFO    ][20731] Running state [/usr/bin/aodh-expirer] at time 02:52:19.187886
2018-10-16 02:52:19,188 [salt.state       :1803][INFO    ][20731] Executing state cron.present for [/usr/bin/aodh-expirer]
2018-10-16 02:52:19,189 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command 'crontab -u aodh -l' in directory '/root'
2018-10-16 02:52:19,208 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][20731] Command '['crontab', '-u', 'aodh', '-l']' failed with return code: 1
2018-10-16 02:52:19,208 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][20731] stderr: no crontab for aodh

2018-10-16 02:52:19,209 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][20731] retcode: 1
2018-10-16 02:52:19,210 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command 'crontab -u aodh /tmp/__salt.tmp.TOYXTF' in directory '/root'
2018-10-16 02:52:19,255 [salt.state       :290 ][INFO    ][20731] {'aodh': '/usr/bin/aodh-expirer'}
2018-10-16 02:52:19,257 [salt.state       :1941][INFO    ][20731] Completed state [/usr/bin/aodh-expirer] at time 02:52:19.257133 duration_in_ms=69.245
2018-10-16 02:52:19,258 [salt.state       :1770][INFO    ][20731] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 02:52:19.258799
2018-10-16 02:52:19,259 [salt.state       :1803][INFO    ][20731] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-10-16 02:52:19,280 [salt.fileclient  :1215][INFO    ][20731] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-10-16 02:52:19,309 [salt.state       :290 ][INFO    ][20731] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 10.167.4.32:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-10-16 02:52:19,309 [salt.state       :1941][INFO    ][20731] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 02:52:19.309309 duration_in_ms=50.511
2018-10-16 02:52:19,309 [salt.state       :1770][INFO    ][20731] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 02:52:19.309545
2018-10-16 02:52:19,309 [salt.state       :1803][INFO    ][20731] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-10-16 02:52:19,317 [salt.state       :290 ][INFO    ][20731] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-10-16 02:52:19,317 [salt.state       :1941][INFO    ][20731] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 02:52:19.317370 duration_in_ms=7.824
2018-10-16 02:52:19,732 [salt.state       :1770][INFO    ][20731] Running state [apache2] at time 02:52:19.732062
2018-10-16 02:52:19,732 [salt.state       :1803][INFO    ][20731] Executing state service.running for [apache2]
2018-10-16 02:52:19,733 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-16 02:52:19,738 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025219726961
2018-10-16 02:52:19,756 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 02:52:19,756 [salt.minion      :1431][INFO    ][27380] Starting a new job with PID 27380
2018-10-16 02:52:19,772 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 02:52:19,774 [salt.minion      :1708][INFO    ][27380] Returning information for job: 20181016025219726961
2018-10-16 02:52:19,786 [salt.state       :290 ][INFO    ][20731] The service apache2 is already running
2018-10-16 02:52:19,787 [salt.state       :1941][INFO    ][20731] Completed state [apache2] at time 02:52:19.787032 duration_in_ms=54.97
2018-10-16 02:52:19,787 [salt.state       :1770][INFO    ][20731] Running state [apache2] at time 02:52:19.787302
2018-10-16 02:52:19,787 [salt.state       :1803][INFO    ][20731] Executing state service.mod_watch for [apache2]
2018-10-16 02:52:19,788 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 02:52:19,805 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-16 02:52:22,099 [salt.state       :290 ][INFO    ][20731] {'apache2': True}
2018-10-16 02:52:22,099 [salt.state       :1941][INFO    ][20731] Completed state [apache2] at time 02:52:22.099708 duration_in_ms=2312.405
2018-10-16 02:52:22,101 [salt.state       :1770][INFO    ][20731] Running state [aodh-evaluator] at time 02:52:22.101563
2018-10-16 02:52:22,102 [salt.state       :1803][INFO    ][20731] Executing state service.running for [aodh-evaluator]
2018-10-16 02:52:22,105 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-10-16 02:52:22,126 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-16 02:52:22,143 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-10-16 02:52:22,155 [salt.state       :290 ][INFO    ][20731] The service aodh-evaluator is already running
2018-10-16 02:52:22,155 [salt.state       :1941][INFO    ][20731] Completed state [aodh-evaluator] at time 02:52:22.155404 duration_in_ms=53.841
2018-10-16 02:52:22,155 [salt.state       :1770][INFO    ][20731] Running state [aodh-evaluator] at time 02:52:22.155634
2018-10-16 02:52:22,155 [salt.state       :1803][INFO    ][20731] Executing state service.mod_watch for [aodh-evaluator]
2018-10-16 02:52:22,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-16 02:52:22,168 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-10-16 02:52:22,324 [salt.state       :290 ][INFO    ][20731] {'aodh-evaluator': True}
2018-10-16 02:52:22,325 [salt.state       :1941][INFO    ][20731] Completed state [aodh-evaluator] at time 02:52:22.325351 duration_in_ms=169.717
2018-10-16 02:52:22,326 [salt.state       :1770][INFO    ][20731] Running state [aodh-notifier] at time 02:52:22.326111
2018-10-16 02:52:22,332 [salt.state       :1803][INFO    ][20731] Executing state service.running for [aodh-notifier]
2018-10-16 02:52:22,332 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-10-16 02:52:22,357 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-16 02:52:22,375 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-10-16 02:52:22,393 [salt.state       :290 ][INFO    ][20731] The service aodh-notifier is already running
2018-10-16 02:52:22,393 [salt.state       :1941][INFO    ][20731] Completed state [aodh-notifier] at time 02:52:22.393656 duration_in_ms=67.545
2018-10-16 02:52:22,393 [salt.state       :1770][INFO    ][20731] Running state [aodh-notifier] at time 02:52:22.393876
2018-10-16 02:52:22,394 [salt.state       :1803][INFO    ][20731] Executing state service.mod_watch for [aodh-notifier]
2018-10-16 02:52:22,394 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-16 02:52:22,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-10-16 02:52:29,890 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025229876553
2018-10-16 02:52:29,913 [salt.minion      :1431][INFO    ][27635] Starting a new job with PID 27635
2018-10-16 02:52:29,937 [salt.minion      :1708][INFO    ][27635] Returning information for job: 20181016025229876553
2018-10-16 02:52:37,539 [salt.state       :290 ][INFO    ][20731] {'aodh-notifier': True}
2018-10-16 02:52:37,540 [salt.state       :1941][INFO    ][20731] Completed state [aodh-notifier] at time 02:52:37.540061 duration_in_ms=15146.184
2018-10-16 02:52:37,540 [salt.state       :1770][INFO    ][20731] Running state [aodh-listener] at time 02:52:37.540896
2018-10-16 02:52:37,541 [salt.state       :1803][INFO    ][20731] Executing state service.running for [aodh-listener]
2018-10-16 02:52:37,545 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-10-16 02:52:37,578 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-16 02:52:37,592 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-10-16 02:52:37,607 [salt.state       :290 ][INFO    ][20731] The service aodh-listener is already running
2018-10-16 02:52:37,607 [salt.state       :1941][INFO    ][20731] Completed state [aodh-listener] at time 02:52:37.607443 duration_in_ms=66.547
2018-10-16 02:52:37,607 [salt.state       :1770][INFO    ][20731] Running state [aodh-listener] at time 02:52:37.607746
2018-10-16 02:52:37,608 [salt.state       :1803][INFO    ][20731] Executing state service.mod_watch for [aodh-listener]
2018-10-16 02:52:37,608 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-16 02:52:37,623 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20731] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-10-16 02:52:40,053 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025240040144
2018-10-16 02:52:40,069 [salt.minion      :1431][INFO    ][27706] Starting a new job with PID 27706
2018-10-16 02:52:40,090 [salt.minion      :1708][INFO    ][27706] Returning information for job: 20181016025240040144
2018-10-16 02:52:50,207 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025250194274
2018-10-16 02:52:50,228 [salt.minion      :1431][INFO    ][27711] Starting a new job with PID 27711
2018-10-16 02:52:50,247 [salt.minion      :1708][INFO    ][27711] Returning information for job: 20181016025250194274
2018-10-16 02:52:52,789 [salt.state       :290 ][INFO    ][20731] {'aodh-listener': True}
2018-10-16 02:52:52,789 [salt.state       :1941][INFO    ][20731] Completed state [aodh-listener] at time 02:52:52.789425 duration_in_ms=15181.679
2018-10-16 02:52:52,796 [salt.minion      :1708][INFO    ][20731] Returning information for job: 20181016025113818201
2018-10-16 02:55:57,427 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command state.sls with jid 20181016025557416811
2018-10-16 02:55:57,449 [salt.minion      :1431][INFO    ][27773] Starting a new job with PID 27773
2018-10-16 02:56:02,116 [salt.state       :905 ][INFO    ][27773] Loading fresh modules for state activity
2018-10-16 02:56:02,197 [salt.fileclient  :1215][INFO    ][27773] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-10-16 02:56:02,225 [salt.fileclient  :1215][INFO    ][27773] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-10-16 02:56:02,523 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025602511070
2018-10-16 02:56:02,542 [salt.minion      :1431][INFO    ][27785] Starting a new job with PID 27785
2018-10-16 02:56:02,558 [salt.minion      :1708][INFO    ][27785] Returning information for job: 20181016025602511070
2018-10-16 02:56:03,566 [salt.state       :1770][INFO    ][27773] Running state [ceilometer-agent-central] at time 02:56:03.566428
2018-10-16 02:56:03,567 [salt.state       :1803][INFO    ][27773] Executing state pkg.installed for [ceilometer-agent-central]
2018-10-16 02:56:03,567 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:56:04,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-10-16 02:56:04,161 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 02:56:06,784 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:56:06,814 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-10-16 02:56:12,721 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025612709105
2018-10-16 02:56:12,743 [salt.minion      :1431][INFO    ][28154] Starting a new job with PID 28154
2018-10-16 02:56:12,763 [salt.minion      :1708][INFO    ][28154] Returning information for job: 20181016025612709105
2018-10-16 02:56:22,924 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025622911652
2018-10-16 02:56:22,947 [salt.minion      :1431][INFO    ][28369] Starting a new job with PID 28369
2018-10-16 02:56:22,969 [salt.minion      :1708][INFO    ][28369] Returning information for job: 20181016025622911652
2018-10-16 02:56:33,130 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025633119654
2018-10-16 02:56:33,153 [salt.minion      :1431][INFO    ][28573] Starting a new job with PID 28573
2018-10-16 02:56:33,201 [salt.minion      :1708][INFO    ][28573] Returning information for job: 20181016025633119654
2018-10-16 02:56:43,165 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025643153268
2018-10-16 02:56:43,185 [salt.minion      :1431][INFO    ][28768] Starting a new job with PID 28768
2018-10-16 02:56:43,211 [salt.minion      :1708][INFO    ][28768] Returning information for job: 20181016025643153268
2018-10-16 02:56:53,381 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025653368380
2018-10-16 02:56:53,402 [salt.minion      :1431][INFO    ][29817] Starting a new job with PID 29817
2018-10-16 02:56:53,435 [salt.minion      :1708][INFO    ][29817] Returning information for job: 20181016025653368380
2018-10-16 02:57:03,402 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025703390194
2018-10-16 02:57:03,428 [salt.minion      :1431][INFO    ][30086] Starting a new job with PID 30086
2018-10-16 02:57:03,448 [salt.minion      :1708][INFO    ][30086] Returning information for job: 20181016025703390194
2018-10-16 02:57:10,613 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:57:10,662 [salt.state       :290 ][INFO    ][27773] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'ibverbs-providers' changed from 'absent' to '17.1-1~cloud0'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmthca1' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libipathverbs1' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libmlx4-1' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libmlx5-1' changed from 'absent' to '1'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '17.1-1~cloud0'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libnes1' changed from 'absent' to '1'
'librados2' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'libcxgb3-1' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'librdmacm1' changed from 'absent' to '17.1-1~cloud0'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-10-16 02:57:10,690 [salt.state       :905 ][INFO    ][27773] Loading fresh modules for state activity
2018-10-16 02:57:10,826 [salt.state       :1941][INFO    ][27773] Completed state [ceilometer-agent-central] at time 02:57:10.826000 duration_in_ms=67259.571
2018-10-16 02:57:10,836 [salt.state       :1770][INFO    ][27773] Running state [python-ceilometerclient] at time 02:57:10.836827
2018-10-16 02:57:10,837 [salt.state       :1803][INFO    ][27773] Executing state pkg.installed for [python-ceilometerclient]
2018-10-16 02:57:11,364 [salt.state       :290 ][INFO    ][27773] All specified packages are already installed
2018-10-16 02:57:11,365 [salt.state       :1941][INFO    ][27773] Completed state [python-ceilometerclient] at time 02:57:11.365371 duration_in_ms=528.544
2018-10-16 02:57:11,365 [salt.state       :1770][INFO    ][27773] Running state [ceilometer-agent-notification] at time 02:57:11.365842
2018-10-16 02:57:11,366 [salt.state       :1803][INFO    ][27773] Executing state pkg.installed for [ceilometer-agent-notification]
2018-10-16 02:57:11,381 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 02:57:11,410 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-10-16 02:57:13,492 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025713482266
2018-10-16 02:57:13,512 [salt.minion      :1431][INFO    ][30477] Starting a new job with PID 30477
2018-10-16 02:57:13,531 [salt.minion      :1708][INFO    ][30477] Returning information for job: 20181016025713482266
2018-10-16 02:57:15,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 02:57:15,298 [salt.state       :290 ][INFO    ][27773] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-10-16 02:57:15,317 [salt.state       :905 ][INFO    ][27773] Loading fresh modules for state activity
2018-10-16 02:57:15,350 [salt.state       :1941][INFO    ][27773] Completed state [ceilometer-agent-notification] at time 02:57:15.350638 duration_in_ms=3984.796
2018-10-16 02:57:15,354 [salt.state       :1770][INFO    ][27773] Running state [/etc/ceilometer/ceilometer.conf] at time 02:57:15.354557
2018-10-16 02:57:15,356 [salt.state       :1803][INFO    ][27773] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-10-16 02:57:15,392 [salt.fileclient  :1215][INFO    ][27773] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-10-16 02:57:15,531 [salt.fileclient  :1215][INFO    ][27773] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-10-16 02:57:15,547 [salt.fileclient  :1215][INFO    ][27773] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-10-16 02:57:15,568 [salt.state       :290 ][INFO    ][27773] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-10-16 02:57:15,577 [salt.state       :1941][INFO    ][27773] Completed state [/etc/ceilometer/ceilometer.conf] at time 02:57:15.577546 duration_in_ms=222.989
2018-10-16 02:57:15,577 [salt.state       :1770][INFO    ][27773] Running state [/etc/default/ceilometer-agent-central] at time 02:57:15.577845
2018-10-16 02:57:15,578 [salt.state       :1803][INFO    ][27773] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-10-16 02:57:15,607 [salt.fileclient  :1215][INFO    ][27773] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-10-16 02:57:15,626 [salt.state       :290 ][INFO    ][27773] File changed:
New file
2018-10-16 02:57:15,626 [salt.state       :1941][INFO    ][27773] Completed state [/etc/default/ceilometer-agent-central] at time 02:57:15.626240 duration_in_ms=48.395
2018-10-16 02:57:15,632 [salt.state       :1770][INFO    ][27773] Running state [/etc/default/ceilometer-agent-notification] at time 02:57:15.632227
2018-10-16 02:57:15,632 [salt.state       :1803][INFO    ][27773] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-10-16 02:57:15,675 [salt.state       :290 ][INFO    ][27773] File changed:
New file
2018-10-16 02:57:15,676 [salt.state       :1941][INFO    ][27773] Completed state [/etc/default/ceilometer-agent-notification] at time 02:57:15.675963 duration_in_ms=43.736
2018-10-16 02:57:15,683 [salt.state       :1770][INFO    ][27773] Running state [python-gnocchiclient] at time 02:57:15.683518
2018-10-16 02:57:15,683 [salt.state       :1803][INFO    ][27773] Executing state pkg.latest for [python-gnocchiclient]
2018-10-16 02:57:15,701 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-10-16 02:57:15,995 [salt.state       :290 ][INFO    ][27773] Package python-gnocchiclient is already up-to-date
2018-10-16 02:57:15,996 [salt.state       :1941][INFO    ][27773] Completed state [python-gnocchiclient] at time 02:57:15.996163 duration_in_ms=312.643
2018-10-16 02:57:15,996 [salt.state       :1770][INFO    ][27773] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 02:57:15.996910
2018-10-16 02:57:15,997 [salt.state       :1803][INFO    ][27773] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2018-10-16 02:57:16,026 [salt.fileclient  :1215][INFO    ][27773] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gnocchi_resources.yaml'
2018-10-16 02:57:16,053 [salt.state       :290 ][INFO    ][27773] File changed:
New file
2018-10-16 02:57:16,053 [salt.state       :1941][INFO    ][27773] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 02:57:16.053791 duration_in_ms=56.881
2018-10-16 02:57:16,070 [salt.state       :1770][INFO    ][27773] Running state [ceilometer-upgrade] at time 02:57:16.070746
2018-10-16 02:57:16,071 [salt.state       :1803][INFO    ][27773] Executing state cmd.run for [ceilometer-upgrade]
2018-10-16 02:57:16,071 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command 'ceilometer-upgrade' in directory '/root'
2018-10-16 02:57:23,711 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025723701110
2018-10-16 02:57:23,732 [salt.minion      :1431][INFO    ][30649] Starting a new job with PID 30649
2018-10-16 02:57:23,753 [salt.minion      :1708][INFO    ][30649] Returning information for job: 20181016025723701110
2018-10-16 02:57:33,922 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025733909737
2018-10-16 02:57:33,943 [salt.minion      :1431][INFO    ][30655] Starting a new job with PID 30655
2018-10-16 02:57:33,962 [salt.minion      :1708][INFO    ][30655] Returning information for job: 20181016025733909737
2018-10-16 02:57:44,129 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016025744116696
2018-10-16 02:57:44,152 [salt.minion      :1431][INFO    ][30660] Starting a new job with PID 30660
2018-10-16 02:57:44,170 [salt.minion      :1708][INFO    ][30660] Returning information for job: 20181016025744116696
2018-10-16 02:57:50,083 [salt.state       :290 ][INFO    ][27773] {'pid': 30637, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-16 02:57:50,086 [salt.state       :1941][INFO    ][27773] Completed state [ceilometer-upgrade] at time 02:57:50.085810 duration_in_ms=34015.062
2018-10-16 02:57:50,087 [salt.state       :1770][INFO    ][27773] Running state [/etc/ceilometer/pipeline.yaml] at time 02:57:50.087306
2018-10-16 02:57:50,087 [salt.state       :1803][INFO    ][27773] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-10-16 02:57:50,111 [salt.fileclient  :1215][INFO    ][27773] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-10-16 02:57:50,166 [salt.state       :290 ][INFO    ][27773] File changed:
New file
2018-10-16 02:57:50,166 [salt.state       :1941][INFO    ][27773] Completed state [/etc/ceilometer/pipeline.yaml] at time 02:57:50.166690 duration_in_ms=79.384
2018-10-16 02:57:50,167 [salt.state       :1770][INFO    ][27773] Running state [/etc/ceilometer/event_pipeline.yaml] at time 02:57:50.167038
2018-10-16 02:57:50,167 [salt.state       :1803][INFO    ][27773] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-10-16 02:57:50,183 [salt.fileclient  :1215][INFO    ][27773] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-10-16 02:57:50,226 [salt.state       :290 ][INFO    ][27773] File changed:
New file
2018-10-16 02:57:50,227 [salt.state       :1941][INFO    ][27773] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 02:57:50.227063 duration_in_ms=60.024
2018-10-16 02:57:50,227 [salt.state       :1770][INFO    ][27773] Running state [/etc/ceilometer/event_definitions.yaml] at time 02:57:50.227418
2018-10-16 02:57:50,227 [salt.state       :1803][INFO    ][27773] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-10-16 02:57:50,244 [salt.fileclient  :1215][INFO    ][27773] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-10-16 02:57:50,255 [salt.state       :290 ][INFO    ][27773] File changed:
New file
2018-10-16 02:57:50,255 [salt.state       :1941][INFO    ][27773] Completed state [/etc/ceilometer/event_definitions.yaml] at time 02:57:50.255840 duration_in_ms=28.421
2018-10-16 02:57:50,256 [salt.state       :1770][INFO    ][27773] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 02:57:50.256204
2018-10-16 02:57:50,256 [salt.state       :1803][INFO    ][27773] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-10-16 02:57:50,272 [salt.fileclient  :1215][INFO    ][27773] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-10-16 02:57:50,281 [salt.state       :290 ][INFO    ][27773] File changed:
New file
2018-10-16 02:57:50,281 [salt.state       :1941][INFO    ][27773] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 02:57:50.281281 duration_in_ms=25.077
2018-10-16 02:57:50,684 [salt.state       :1770][INFO    ][27773] Running state [ceilometer-agent-central] at time 02:57:50.684393
2018-10-16 02:57:50,685 [salt.state       :1803][INFO    ][27773] Executing state service.running for [ceilometer-agent-central]
2018-10-16 02:57:50,686 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-10-16 02:57:50,712 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-16 02:57:50,727 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-16 02:57:50,740 [salt.state       :290 ][INFO    ][27773] The service ceilometer-agent-central is already running
2018-10-16 02:57:50,740 [salt.state       :1941][INFO    ][27773] Completed state [ceilometer-agent-central] at time 02:57:50.740599 duration_in_ms=56.206
2018-10-16 02:57:50,741 [salt.state       :1770][INFO    ][27773] Running state [ceilometer-agent-central] at time 02:57:50.740990
2018-10-16 02:57:50,741 [salt.state       :1803][INFO    ][27773] Executing state service.mod_watch for [ceilometer-agent-central]
2018-10-16 02:57:50,742 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-16 02:57:50,758 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-16 02:57:50,977 [salt.state       :290 ][INFO    ][27773] {'ceilometer-agent-central': True}
2018-10-16 02:57:50,978 [salt.state       :1941][INFO    ][27773] Completed state [ceilometer-agent-central] at time 02:57:50.978342 duration_in_ms=237.352
2018-10-16 02:57:50,979 [salt.state       :1770][INFO    ][27773] Running state [ceilometer-agent-notification] at time 02:57:50.979216
2018-10-16 02:57:50,979 [salt.state       :1803][INFO    ][27773] Executing state service.running for [ceilometer-agent-notification]
2018-10-16 02:57:50,980 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-10-16 02:57:51,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-16 02:57:51,022 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-16 02:57:51,036 [salt.state       :290 ][INFO    ][27773] The service ceilometer-agent-notification is already running
2018-10-16 02:57:51,036 [salt.state       :1941][INFO    ][27773] Completed state [ceilometer-agent-notification] at time 02:57:51.036663 duration_in_ms=57.447
2018-10-16 02:57:51,036 [salt.state       :1770][INFO    ][27773] Running state [ceilometer-agent-notification] at time 02:57:51.036922
2018-10-16 02:57:51,037 [salt.state       :1803][INFO    ][27773] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-10-16 02:57:51,038 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-16 02:57:51,053 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27773] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-16 02:57:51,183 [salt.state       :290 ][INFO    ][27773] {'ceilometer-agent-notification': True}
2018-10-16 02:57:51,183 [salt.state       :1941][INFO    ][27773] Completed state [ceilometer-agent-notification] at time 02:57:51.183693 duration_in_ms=146.771
2018-10-16 02:57:51,187 [salt.minion      :1708][INFO    ][27773] Returning information for job: 20181016025557416811
2018-10-16 03:05:19,197 [salt.minion      :1307][INFO    ][3131] User sudo_ubuntu Executing command cp.push_dir with jid 20181016030519186915
2018-10-16 03:05:19,224 [salt.minion      :1431][INFO    ][30833] Starting a new job with PID 30833
