2018-10-13 04:51:11,010 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,138 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,141 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,147 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,150 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,510 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,514 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,518 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,598 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,602 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,606 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,610 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,743 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,786 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,790 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,795 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,799 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,804 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,808 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,812 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,817 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,822 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,826 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,831 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,836 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,843 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,846 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,852 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,857 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,862 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,867 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,872 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,876 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,882 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,886 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,891 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,895 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,901 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,906 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,910 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,915 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,919 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,924 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,928 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,934 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,938 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,942 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,947 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,951 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,955 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,960 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,967 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,970 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,975 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,980 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,986 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:11,990 [salt.utils.decorators:82  ][ERROR   ][1666] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-13 04:51:36,787 [salt.utils.decorators:613 ][WARNING ][1666] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-13 04:51:40,458 [salt.loaded.int.states.file:2150][WARNING ][1666] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-13 04:51:42,819 [salt.loaded.int.states.file:2150][WARNING ][1666] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-13 04:51:44,644 [salt.loaded.int.states.file:2150][WARNING ][1666] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-13 04:51:49,413 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2869] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-10-13 04:51:49,456 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2869] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-10-13 04:51:49,486 [salt.utils.parsers:1051][WARNING ][1312] Minion received a SIGTERM. Exiting.
2018-10-13 04:51:50,524 [salt.cli.daemons :293 ][INFO    ][2926] Setting up the Salt Minion "mdb01.mcp-ovs-ha.local"
2018-10-13 04:51:50,687 [salt.cli.daemons :82  ][INFO    ][2926] Starting up the Salt Minion
2018-10-13 04:51:50,688 [salt.utils.event :1017][INFO    ][2926] Starting pull socket on /var/run/salt/minion/minion_event_b0741cc873_pull.ipc
2018-10-13 04:51:51,727 [salt.minion      :976 ][INFO    ][2926] Creating minion process manager
2018-10-13 04:51:53,521 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2926] Executing command ['date', '+%z'] in directory '/root'
2018-10-13 04:51:53,558 [salt.utils.schedule:568 ][INFO    ][2926] Updating job settings for scheduled job: __mine_interval
2018-10-13 04:51:53,561 [salt.minion      :1107][INFO    ][2926] Added mine.update to scheduler
2018-10-13 04:51:53,568 [salt.minion      :1965][INFO    ][2926] Minion is starting as user 'root'
2018-10-13 04:51:53,581 [salt.minion      :2324][INFO    ][2926] Minion is ready to receive requests!
2018-10-13 04:52:32,182 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.apply with jid 20181013045232169032
2018-10-13 04:52:32,205 [salt.minion      :1431][INFO    ][3020] Starting a new job with PID 3020
2018-10-13 04:52:38,444 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013045238437189
2018-10-13 04:52:38,470 [salt.minion      :1431][INFO    ][3025] Starting a new job with PID 3025
2018-10-13 04:52:38,496 [salt.minion      :1708][INFO    ][3025] Returning information for job: 20181013045238437189
2018-10-13 04:52:40,180 [salt.state       :905 ][INFO    ][3020] Loading fresh modules for state activity
2018-10-13 04:52:42,900 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-10-13 04:52:42,953 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-10-13 04:52:43,137 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-10-13 04:52:43,280 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-10-13 04:52:43,432 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-10-13 04:52:45,205 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-10-13 04:52:45,976 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-10-13 04:52:46,098 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-10-13 04:52:46,296 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-10-13 04:52:46,328 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-10-13 04:52:46,487 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-10-13 04:52:46,636 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-10-13 04:52:46,776 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-10-13 04:52:46,976 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-10-13 04:52:48,493 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013045248488380
2018-10-13 04:52:48,525 [salt.minion      :1431][INFO    ][3060] Starting a new job with PID 3060
2018-10-13 04:52:48,564 [salt.minion      :1708][INFO    ][3060] Returning information for job: 20181013045248488380
2018-10-13 04:52:48,754 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-10-13 04:52:49,124 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-10-13 04:52:49,257 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-10-13 04:52:49,399 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-10-13 04:52:49,542 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-10-13 04:52:49,684 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-10-13 04:52:49,817 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-10-13 04:52:50,039 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-10-13 04:52:50,303 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-10-13 04:52:50,442 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-10-13 04:52:50,609 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-10-13 04:52:52,277 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-10-13 04:52:52,351 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-10-13 04:52:52,448 [salt.state       :1770][INFO    ][3020] Running state [/etc/environment] at time 04:52:52.448831
2018-10-13 04:52:52,449 [salt.state       :1803][INFO    ][3020] Executing state file.blockreplace for [/etc/environment]
2018-10-13 04:52:52,460 [salt.state       :290 ][INFO    ][3020] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-10-13 04:52:52,462 [salt.state       :1941][INFO    ][3020] Completed state [/etc/environment] at time 04:52:52.462365 duration_in_ms=13.535
2018-10-13 04:52:52,462 [salt.state       :1770][INFO    ][3020] Running state [/etc/profile.d] at time 04:52:52.462910
2018-10-13 04:52:52,463 [salt.state       :1803][INFO    ][3020] Executing state file.directory for [/etc/profile.d]
2018-10-13 04:52:52,465 [salt.state       :290 ][INFO    ][3020] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-10-13 04:52:52,466 [salt.state       :1941][INFO    ][3020] Completed state [/etc/profile.d] at time 04:52:52.466557 duration_in_ms=3.647
2018-10-13 04:52:53,259 [salt.state       :1770][INFO    ][3020] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 04:52:53.259240
2018-10-13 04:52:53,260 [salt.state       :1803][INFO    ][3020] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-10-13 04:52:53,292 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-10-13 04:52:53,313 [salt.state       :290 ][INFO    ][3020] File changed:
New file
2018-10-13 04:52:53,314 [salt.state       :1941][INFO    ][3020] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 04:52:53.313970 duration_in_ms=54.73
2018-10-13 04:52:53,315 [salt.state       :1770][INFO    ][3020] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 04:52:53.315161
2018-10-13 04:52:53,317 [salt.state       :1803][INFO    ][3020] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-10-13 04:52:53,353 [salt.state       :290 ][INFO    ][3020] File changed:
New file
2018-10-13 04:52:53,355 [salt.state       :1941][INFO    ][3020] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 04:52:53.355021 duration_in_ms=39.861
2018-10-13 04:52:53,357 [salt.state       :1770][INFO    ][3020] Running state [linux_repo_prereq_pkgs] at time 04:52:53.357906
2018-10-13 04:52:53,359 [salt.state       :1803][INFO    ][3020] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-10-13 04:52:53,361 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 04:52:53,963 [salt.state       :290 ][INFO    ][3020] All specified packages are already installed
2018-10-13 04:52:53,963 [salt.state       :1941][INFO    ][3020] Completed state [linux_repo_prereq_pkgs] at time 04:52:53.963882 duration_in_ms=605.976
2018-10-13 04:52:53,964 [salt.state       :1770][INFO    ][3020] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 04:52:53.964423
2018-10-13 04:52:53,965 [salt.state       :1803][INFO    ][3020] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-10-13 04:52:53,965 [salt.state       :290 ][INFO    ][3020] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-10-13 04:52:53,965 [salt.state       :1941][INFO    ][3020] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 04:52:53.965874 duration_in_ms=1.451
2018-10-13 04:52:53,966 [salt.state       :1770][INFO    ][3020] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 04:52:53.966132
2018-10-13 04:52:53,966 [salt.state       :1803][INFO    ][3020] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-10-13 04:52:53,966 [salt.state       :290 ][INFO    ][3020] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-10-13 04:52:53,967 [salt.state       :1941][INFO    ][3020] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 04:52:53.967189 duration_in_ms=1.058
2018-10-13 04:52:53,968 [salt.state       :1770][INFO    ][3020] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 04:52:53.968027
2018-10-13 04:52:53,968 [salt.state       :1803][INFO    ][3020] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-10-13 04:52:53,992 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-10-13 04:52:54,128 [salt.state       :290 ][INFO    ][3020] File changed:
New file
2018-10-13 04:52:54,128 [salt.state       :1941][INFO    ][3020] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 04:52:54.128325 duration_in_ms=160.297
2018-10-13 04:52:54,132 [salt.state       :1770][INFO    ][3020] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 04:52:54.132215
2018-10-13 04:52:54,133 [salt.state       :1803][INFO    ][3020] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-10-13 04:52:54,513 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-10-13 04:52:54,869 [salt.state       :290 ][INFO    ][3020] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-10-13 04:52:54,870 [salt.state       :1941][INFO    ][3020] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 04:52:54.870328 duration_in_ms=738.112
2018-10-13 04:52:54,871 [salt.state       :1770][INFO    ][3020] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 04:52:54.871819
2018-10-13 04:52:54,872 [salt.state       :1803][INFO    ][3020] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-10-13 04:52:54,873 [salt.state       :290 ][INFO    ][3020] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-10-13 04:52:54,874 [salt.state       :1941][INFO    ][3020] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 04:52:54.874071 duration_in_ms=2.252
2018-10-13 04:52:54,874 [salt.state       :1770][INFO    ][3020] Running state [/etc/apt/preferences.d/uca] at time 04:52:54.874435
2018-10-13 04:52:54,875 [salt.state       :1803][INFO    ][3020] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-10-13 04:52:55,611 [salt.state       :290 ][INFO    ][3020] File changed:
New file
2018-10-13 04:52:55,611 [salt.state       :1941][INFO    ][3020] Completed state [/etc/apt/preferences.d/uca] at time 04:52:55.611868 duration_in_ms=737.434
2018-10-13 04:52:55,614 [salt.state       :1770][INFO    ][3020] Running state [echo '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' | base64 -d | apt-key add -] at time 04:52:55.613952
2018-10-13 04:52:55,614 [salt.state       :1803][INFO    ][3020] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-10-13 04:52:55,614 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-10-13 04:52:55,805 [salt.state       :290 ][INFO    ][3020] {'pid': 3234, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-10-13 04:52:55,806 [salt.state       :1941][INFO    ][3020] Completed state [echo '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' | base64 -d | apt-key add -] at time 04:52:55.806836 duration_in_ms=192.883
2018-10-13 04:52:55,813 [salt.state       :1770][INFO    ][3020] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 04:52:55.813460
2018-10-13 04:52:55,814 [salt.state       :1803][INFO    ][3020] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-10-13 04:52:55,947 [salt.state       :290 ][INFO    ][3020] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-10-13 04:52:55,948 [salt.state       :1941][INFO    ][3020] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 04:52:55.948199 duration_in_ms=134.739
2018-10-13 04:52:55,949 [salt.state       :1770][INFO    ][3020] Running state [pkg.refresh_db] at time 04:52:55.949573
2018-10-13 04:52:55,950 [salt.state       :1803][INFO    ][3020] Executing state module.run for [pkg.refresh_db]
2018-10-13 04:52:55,950 [salt.utils.decorators:613 ][WARNING ][3020] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-13 04:52:55,951 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-13 04:52:58,659 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013045258652512
2018-10-13 04:52:58,677 [salt.minion      :1431][INFO    ][3708] Starting a new job with PID 3708
2018-10-13 04:52:58,699 [salt.minion      :1708][INFO    ][3708] Returning information for job: 20181013045258652512
2018-10-13 04:53:00,564 [salt.state       :290 ][INFO    ][3020] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': True, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': True, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-10-13 04:53:00,565 [salt.state       :1941][INFO    ][3020] Completed state [pkg.refresh_db] at time 04:53:00.565709 duration_in_ms=4616.135
2018-10-13 04:53:00,566 [salt.state       :1770][INFO    ][3020] Running state [linux_extra_packages_latest] at time 04:53:00.566147
2018-10-13 04:53:00,566 [salt.state       :1803][INFO    ][3020] Executing state pkg.latest for [linux_extra_packages_latest]
2018-10-13 04:53:00,590 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-10-13 04:53:00,829 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 04:53:00,863 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-10-13 04:53:04,289 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 04:53:04,337 [salt.state       :290 ][INFO    ][3020] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-10-13 04:53:04,368 [salt.state       :905 ][INFO    ][3020] Loading fresh modules for state activity
2018-10-13 04:53:04,425 [salt.state       :1941][INFO    ][3020] Completed state [linux_extra_packages_latest] at time 04:53:04.424780 duration_in_ms=3858.631
2018-10-13 04:53:04,431 [salt.state       :1770][INFO    ][3020] Running state [UTC] at time 04:53:04.431472
2018-10-13 04:53:04,432 [salt.state       :1803][INFO    ][3020] Executing state timezone.system for [UTC]
2018-10-13 04:53:04,438 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['timedatectl'] in directory '/root'
2018-10-13 04:53:04,718 [salt.state       :290 ][INFO    ][3020] Timezone UTC already set, UTC already set to UTC
2018-10-13 04:53:04,718 [salt.state       :1941][INFO    ][3020] Completed state [UTC] at time 04:53:04.718485 duration_in_ms=287.012
2018-10-13 04:53:04,721 [salt.state       :1770][INFO    ][3020] Running state [/etc/default/grub.d] at time 04:53:04.721777
2018-10-13 04:53:04,722 [salt.state       :1803][INFO    ][3020] Executing state file.directory for [/etc/default/grub.d]
2018-10-13 04:53:04,730 [salt.state       :290 ][INFO    ][3020] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-10-13 04:53:04,730 [salt.state       :1941][INFO    ][3020] Completed state [/etc/default/grub.d] at time 04:53:04.730372 duration_in_ms=8.596
2018-10-13 04:53:04,735 [salt.state       :1770][INFO    ][3020] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 04:53:04.735480
2018-10-13 04:53:04,736 [salt.state       :1803][INFO    ][3020] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2018-10-13 04:53:04,842 [salt.state       :290 ][INFO    ][3020] File changed:
New file
2018-10-13 04:53:04,843 [salt.state       :1941][INFO    ][3020] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 04:53:04.843310 duration_in_ms=107.829
2018-10-13 04:53:04,844 [salt.state       :1770][INFO    ][3020] Running state [update-grub] at time 04:53:04.844243
2018-10-13 04:53:04,844 [salt.state       :1803][INFO    ][3020] Executing state cmd.wait for [update-grub]
2018-10-13 04:53:04,844 [salt.state       :290 ][INFO    ][3020] No changes made for update-grub
2018-10-13 04:53:04,845 [salt.state       :1941][INFO    ][3020] Completed state [update-grub] at time 04:53:04.845039 duration_in_ms=0.796
2018-10-13 04:53:04,845 [salt.state       :1770][INFO    ][3020] Running state [update-grub] at time 04:53:04.845251
2018-10-13 04:53:04,845 [salt.state       :1803][INFO    ][3020] Executing state cmd.mod_watch for [update-grub]
2018-10-13 04:53:04,846 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'update-grub' in directory '/root'
2018-10-13 04:53:06,301 [salt.state       :290 ][INFO    ][3020] {'pid': 3899, 'retcode': 0, 'stderr': 'Generating grub configuration file ...\nFound linux image: /boot/vmlinuz-4.15.0-36-generic\nFound initrd image: /boot/initrd.img-4.15.0-36-generic\nFound linux image: /boot/vmlinuz-4.4.0-137-generic\nFound initrd image: /boot/initrd.img-4.4.0-137-generic\ndone', 'stdout': ''}
2018-10-13 04:53:06,301 [salt.state       :1941][INFO    ][3020] Completed state [update-grub] at time 04:53:06.301628 duration_in_ms=1456.375
2018-10-13 04:53:06,307 [salt.state       :1770][INFO    ][3020] Running state [nf_conntrack] at time 04:53:06.307522
2018-10-13 04:53:06,308 [salt.state       :1803][INFO    ][3020] Executing state kmod.present for [nf_conntrack]
2018-10-13 04:53:06,309 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'lsmod' in directory '/root'
2018-10-13 04:53:06,810 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'lsmod' in directory '/root'
2018-10-13 04:53:06,832 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-10-13 04:53:06,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'lsmod' in directory '/root'
2018-10-13 04:53:07,014 [salt.state       :290 ][INFO    ][3020] {'nf_conntrack': 'loaded'}
2018-10-13 04:53:07,015 [salt.state       :1941][INFO    ][3020] Completed state [nf_conntrack] at time 04:53:07.015120 duration_in_ms=707.597
2018-10-13 04:53:07,021 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.tcp_keepalive_probes] at time 04:53:07.021036
2018-10-13 04:53:07,021 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-10-13 04:53:07,022 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-10-13 04:53:07,150 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.tcp_keepalive_probes': 8}
2018-10-13 04:53:07,152 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.tcp_keepalive_probes] at time 04:53:07.151183 duration_in_ms=130.145
2018-10-13 04:53:07,153 [salt.state       :1770][INFO    ][3020] Running state [fs.file-max] at time 04:53:07.153929
2018-10-13 04:53:07,154 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [fs.file-max]
2018-10-13 04:53:07,157 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-10-13 04:53:07,181 [salt.state       :290 ][INFO    ][3020] {'fs.file-max': 124165}
2018-10-13 04:53:07,182 [salt.state       :1941][INFO    ][3020] Completed state [fs.file-max] at time 04:53:07.182263 duration_in_ms=28.334
2018-10-13 04:53:07,183 [salt.state       :1770][INFO    ][3020] Running state [net.core.somaxconn] at time 04:53:07.183546
2018-10-13 04:53:07,184 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.core.somaxconn]
2018-10-13 04:53:07,248 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-10-13 04:53:07,267 [salt.state       :290 ][INFO    ][3020] {'net.core.somaxconn': 4096}
2018-10-13 04:53:07,268 [salt.state       :1941][INFO    ][3020] Completed state [net.core.somaxconn] at time 04:53:07.268016 duration_in_ms=84.47
2018-10-13 04:53:07,268 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.tcp_max_syn_backlog] at time 04:53:07.268453
2018-10-13 04:53:07,268 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-10-13 04:53:07,318 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-10-13 04:53:07,337 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-10-13 04:53:07,338 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.tcp_max_syn_backlog] at time 04:53:07.338384 duration_in_ms=69.929
2018-10-13 04:53:07,339 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.tcp_tw_reuse] at time 04:53:07.339162
2018-10-13 04:53:07,339 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-10-13 04:53:07,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-10-13 04:53:07,412 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.tcp_tw_reuse': 1}
2018-10-13 04:53:07,413 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.tcp_tw_reuse] at time 04:53:07.412765 duration_in_ms=73.602
2018-10-13 04:53:07,413 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.tcp_congestion_control] at time 04:53:07.413639
2018-10-13 04:53:07,414 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-10-13 04:53:07,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-10-13 04:53:07,578 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-10-13 04:53:07,578 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.tcp_congestion_control] at time 04:53:07.578821 duration_in_ms=165.182
2018-10-13 04:53:07,579 [salt.state       :1770][INFO    ][3020] Running state [net.nf_conntrack_max] at time 04:53:07.579285
2018-10-13 04:53:07,580 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.nf_conntrack_max]
2018-10-13 04:53:07,581 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-10-13 04:53:07,602 [salt.state       :290 ][INFO    ][3020] {'net.nf_conntrack_max': 1048576}
2018-10-13 04:53:07,603 [salt.state       :1941][INFO    ][3020] Completed state [net.nf_conntrack_max] at time 04:53:07.602942 duration_in_ms=23.656
2018-10-13 04:53:07,603 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.tcp_retries2] at time 04:53:07.603392
2018-10-13 04:53:07,603 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-10-13 04:53:07,605 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-10-13 04:53:07,633 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.tcp_retries2': 5}
2018-10-13 04:53:07,634 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.tcp_retries2] at time 04:53:07.634635 duration_in_ms=31.242
2018-10-13 04:53:07,635 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.tcp_fin_timeout] at time 04:53:07.635096
2018-10-13 04:53:07,635 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-10-13 04:53:07,637 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-10-13 04:53:07,661 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.tcp_fin_timeout': 30}
2018-10-13 04:53:07,662 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.tcp_fin_timeout] at time 04:53:07.662145 duration_in_ms=27.047
2018-10-13 04:53:07,662 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.tcp_slow_start_after_idle] at time 04:53:07.662924
2018-10-13 04:53:07,663 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-10-13 04:53:07,667 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-10-13 04:53:07,691 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-10-13 04:53:07,691 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 04:53:07.691403 duration_in_ms=28.479
2018-10-13 04:53:07,693 [salt.state       :1770][INFO    ][3020] Running state [vm.swappiness] at time 04:53:07.693037
2018-10-13 04:53:07,693 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [vm.swappiness]
2018-10-13 04:53:07,694 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-10-13 04:53:07,714 [salt.state       :290 ][INFO    ][3020] {'vm.swappiness': 10}
2018-10-13 04:53:07,714 [salt.state       :1941][INFO    ][3020] Completed state [vm.swappiness] at time 04:53:07.714738 duration_in_ms=21.701
2018-10-13 04:53:07,715 [salt.state       :1770][INFO    ][3020] Running state [net.core.netdev_max_backlog] at time 04:53:07.715198
2018-10-13 04:53:07,715 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-10-13 04:53:07,717 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-10-13 04:53:07,742 [salt.state       :290 ][INFO    ][3020] {'net.core.netdev_max_backlog': 261144}
2018-10-13 04:53:07,742 [salt.state       :1941][INFO    ][3020] Completed state [net.core.netdev_max_backlog] at time 04:53:07.742852 duration_in_ms=27.654
2018-10-13 04:53:07,743 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.neigh.default.gc_thresh1] at time 04:53:07.743582
2018-10-13 04:53:07,745 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-10-13 04:53:07,746 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-10-13 04:53:07,771 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-10-13 04:53:07,773 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 04:53:07.773904 duration_in_ms=30.322
2018-10-13 04:53:07,774 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.neigh.default.gc_thresh2] at time 04:53:07.774617
2018-10-13 04:53:07,775 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-10-13 04:53:07,777 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-10-13 04:53:07,804 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-10-13 04:53:07,805 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 04:53:07.805009 duration_in_ms=30.392
2018-10-13 04:53:07,805 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.neigh.default.gc_thresh3] at time 04:53:07.805443
2018-10-13 04:53:07,805 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-10-13 04:53:07,807 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-10-13 04:53:07,831 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-10-13 04:53:07,831 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 04:53:07.831443 duration_in_ms=25.999
2018-10-13 04:53:07,832 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.tcp_keepalive_intvl] at time 04:53:07.832215
2018-10-13 04:53:07,832 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-10-13 04:53:07,836 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-10-13 04:53:07,859 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-10-13 04:53:07,862 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.tcp_keepalive_intvl] at time 04:53:07.859663 duration_in_ms=27.446
2018-10-13 04:53:07,863 [salt.state       :1770][INFO    ][3020] Running state [net.ipv4.tcp_keepalive_time] at time 04:53:07.863265
2018-10-13 04:53:07,863 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-10-13 04:53:07,865 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-10-13 04:53:07,889 [salt.state       :290 ][INFO    ][3020] {'net.ipv4.tcp_keepalive_time': 30}
2018-10-13 04:53:07,890 [salt.state       :1941][INFO    ][3020] Completed state [net.ipv4.tcp_keepalive_time] at time 04:53:07.889917 duration_in_ms=26.651
2018-10-13 04:53:07,891 [salt.state       :1770][INFO    ][3020] Running state [kernel.panic] at time 04:53:07.890683
2018-10-13 04:53:07,891 [salt.state       :1803][INFO    ][3020] Executing state sysctl.present for [kernel.panic]
2018-10-13 04:53:07,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-10-13 04:53:07,918 [salt.state       :290 ][INFO    ][3020] {'kernel.panic': 60}
2018-10-13 04:53:07,919 [salt.state       :1941][INFO    ][3020] Completed state [kernel.panic] at time 04:53:07.919371 duration_in_ms=28.687
2018-10-13 04:53:07,934 [salt.state       :1770][INFO    ][3020] Running state [linux_sysfs_package] at time 04:53:07.934128
2018-10-13 04:53:07,935 [salt.state       :1803][INFO    ][3020] Executing state pkg.installed for [linux_sysfs_package]
2018-10-13 04:53:08,802 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013045308795571
2018-10-13 04:53:08,834 [salt.minion      :1431][INFO    ][4356] Starting a new job with PID 4356
2018-10-13 04:53:08,857 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-10-13 04:53:08,861 [salt.minion      :1708][INFO    ][4356] Returning information for job: 20181013045308795571
2018-10-13 04:53:08,998 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-13 04:53:11,257 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 04:53:11,290 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-10-13 04:53:16,511 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 04:53:16,572 [salt.state       :290 ][INFO    ][3020] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-10-13 04:53:16,597 [salt.state       :905 ][INFO    ][3020] Loading fresh modules for state activity
2018-10-13 04:53:16,654 [salt.state       :1941][INFO    ][3020] Completed state [linux_sysfs_package] at time 04:53:16.654007 duration_in_ms=8719.878
2018-10-13 04:53:16,661 [salt.state       :1770][INFO    ][3020] Running state [/etc/sysfs.d] at time 04:53:16.661112
2018-10-13 04:53:16,661 [salt.state       :1803][INFO    ][3020] Executing state file.directory for [/etc/sysfs.d]
2018-10-13 04:53:16,666 [salt.state       :290 ][INFO    ][3020] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-10-13 04:53:16,667 [salt.state       :1941][INFO    ][3020] Completed state [/etc/sysfs.d] at time 04:53:16.667133 duration_in_ms=6.021
2018-10-13 04:53:17,284 [salt.state       :1770][INFO    ][3020] Running state [ondemand] at time 04:53:17.284751
2018-10-13 04:53:17,285 [salt.state       :1803][INFO    ][3020] Executing state service.dead for [ondemand]
2018-10-13 04:53:17,286 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-10-13 04:53:17,306 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-13 04:53:17,325 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-13 04:53:17,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-10-13 04:53:17,432 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-13 04:53:17,462 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-13 04:53:17,494 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-13 04:53:17,530 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-10-13 04:53:17,743 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-13 04:53:17,780 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'runlevel' in directory '/root'
2018-10-13 04:53:17,803 [salt.state       :290 ][INFO    ][3020] {'ondemand': True}
2018-10-13 04:53:17,804 [salt.state       :1941][INFO    ][3020] Completed state [ondemand] at time 04:53:17.804089 duration_in_ms=519.338
2018-10-13 04:53:17,805 [salt.state       :1770][INFO    ][3020] Running state [en_US.UTF-8] at time 04:53:17.805604
2018-10-13 04:53:17,806 [salt.state       :1803][INFO    ][3020] Executing state locale.present for [en_US.UTF-8]
2018-10-13 04:53:17,808 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'locale -a' in directory '/root'
2018-10-13 04:53:17,825 [salt.state       :290 ][INFO    ][3020] Locale en_US.UTF-8 is already present
2018-10-13 04:53:17,826 [salt.state       :1941][INFO    ][3020] Completed state [en_US.UTF-8] at time 04:53:17.826029 duration_in_ms=20.425
2018-10-13 04:53:17,828 [salt.state       :1770][INFO    ][3020] Running state [en_US.UTF-8] at time 04:53:17.828261
2018-10-13 04:53:17,828 [salt.state       :1803][INFO    ][3020] Executing state locale.system for [en_US.UTF-8]
2018-10-13 04:53:17,829 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'localectl' in directory '/root'
2018-10-13 04:53:17,889 [salt.state       :290 ][INFO    ][3020] System locale en_US.UTF-8 already set
2018-10-13 04:53:17,890 [salt.state       :1941][INFO    ][3020] Completed state [en_US.UTF-8] at time 04:53:17.890338 duration_in_ms=62.076
2018-10-13 04:53:17,892 [salt.state       :1770][INFO    ][3020] Running state [root] at time 04:53:17.892428
2018-10-13 04:53:17,892 [salt.state       :1803][INFO    ][3020] Executing state group.present for [root]
2018-10-13 04:53:17,893 [salt.state       :290 ][INFO    ][3020] Group root is present and up to date
2018-10-13 04:53:17,893 [salt.state       :1941][INFO    ][3020] Completed state [root] at time 04:53:17.893594 duration_in_ms=1.166
2018-10-13 04:53:17,897 [salt.state       :1770][INFO    ][3020] Running state [root] at time 04:53:17.897004
2018-10-13 04:53:17,897 [salt.state       :1803][INFO    ][3020] Executing state user.present for [root]
2018-10-13 04:53:17,906 [salt.state       :290 ][INFO    ][3020] User root is present and up to date
2018-10-13 04:53:17,906 [salt.state       :1941][INFO    ][3020] Completed state [root] at time 04:53:17.906258 duration_in_ms=9.254
2018-10-13 04:53:17,907 [salt.state       :1770][INFO    ][3020] Running state [/root] at time 04:53:17.907752
2018-10-13 04:53:17,908 [salt.state       :1803][INFO    ][3020] Executing state file.directory for [/root]
2018-10-13 04:53:17,909 [salt.state       :290 ][INFO    ][3020] Directory /root is in the correct state
Directory /root updated
2018-10-13 04:53:17,909 [salt.state       :1941][INFO    ][3020] Completed state [/root] at time 04:53:17.909730 duration_in_ms=1.978
2018-10-13 04:53:17,910 [salt.state       :1770][INFO    ][3020] Running state [/etc/sudoers.d/90-salt-user-root] at time 04:53:17.909973
2018-10-13 04:53:17,910 [salt.state       :1803][INFO    ][3020] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-10-13 04:53:17,910 [salt.state       :290 ][INFO    ][3020] File /etc/sudoers.d/90-salt-user-root is not present
2018-10-13 04:53:17,910 [salt.state       :1941][INFO    ][3020] Completed state [/etc/sudoers.d/90-salt-user-root] at time 04:53:17.910743 duration_in_ms=0.77
2018-10-13 04:53:17,911 [salt.state       :1770][INFO    ][3020] Running state [ubuntu] at time 04:53:17.911007
2018-10-13 04:53:17,911 [salt.state       :1803][INFO    ][3020] Executing state group.present for [ubuntu]
2018-10-13 04:53:17,912 [salt.state       :290 ][INFO    ][3020] Group ubuntu is present and up to date
2018-10-13 04:53:17,912 [salt.state       :1941][INFO    ][3020] Completed state [ubuntu] at time 04:53:17.912370 duration_in_ms=1.362
2018-10-13 04:53:17,913 [salt.state       :1770][INFO    ][3020] Running state [ubuntu] at time 04:53:17.913631
2018-10-13 04:53:17,913 [salt.state       :1803][INFO    ][3020] Executing state user.present for [ubuntu]
2018-10-13 04:53:17,918 [salt.state       :290 ][INFO    ][3020] {'passwd': 'XXX-REDACTED-XXX'}
2018-10-13 04:53:17,918 [salt.state       :1941][INFO    ][3020] Completed state [ubuntu] at time 04:53:17.918908 duration_in_ms=5.277
2018-10-13 04:53:17,920 [salt.state       :1770][INFO    ][3020] Running state [/home/ubuntu] at time 04:53:17.920109
2018-10-13 04:53:17,920 [salt.state       :1803][INFO    ][3020] Executing state file.directory for [/home/ubuntu]
2018-10-13 04:53:17,922 [salt.state       :290 ][INFO    ][3020] {'mode': '0700'}
2018-10-13 04:53:17,922 [salt.state       :1941][INFO    ][3020] Completed state [/home/ubuntu] at time 04:53:17.922289 duration_in_ms=2.18
2018-10-13 04:53:17,923 [salt.state       :1770][INFO    ][3020] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 04:53:17.923364
2018-10-13 04:53:17,924 [salt.state       :1803][INFO    ][3020] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-10-13 04:53:17,946 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-10-13 04:53:17,963 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.6LVVHC' in directory '/root'
2018-10-13 04:53:17,991 [salt.state       :290 ][INFO    ][3020] File changed:
New file
2018-10-13 04:53:17,991 [salt.state       :1941][INFO    ][3020] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 04:53:17.991615 duration_in_ms=68.25
2018-10-13 04:53:17,992 [salt.state       :1770][INFO    ][3020] Running state [/etc/security/limits.d/90-salt-default.conf] at time 04:53:17.992006
2018-10-13 04:53:17,992 [salt.state       :1803][INFO    ][3020] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-10-13 04:53:18,016 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-10-13 04:53:18,139 [salt.state       :290 ][INFO    ][3020] File changed:
New file
2018-10-13 04:53:18,140 [salt.state       :1941][INFO    ][3020] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 04:53:18.140033 duration_in_ms=148.027
2018-10-13 04:53:18,140 [salt.state       :1770][INFO    ][3020] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 04:53:18.140310
2018-10-13 04:53:18,140 [salt.state       :1803][INFO    ][3020] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-10-13 04:53:18,159 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-10-13 04:53:18,282 [salt.state       :290 ][INFO    ][3020] File changed:
New file
2018-10-13 04:53:18,282 [salt.state       :1941][INFO    ][3020] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 04:53:18.282597 duration_in_ms=142.287
2018-10-13 04:53:18,285 [salt.state       :1770][INFO    ][3020] Running state [service.systemctl_reload] at time 04:53:18.285917
2018-10-13 04:53:18,286 [salt.state       :1803][INFO    ][3020] Executing state module.wait for [service.systemctl_reload]
2018-10-13 04:53:18,286 [salt.state       :290 ][INFO    ][3020] No changes made for service.systemctl_reload
2018-10-13 04:53:18,286 [salt.state       :1941][INFO    ][3020] Completed state [service.systemctl_reload] at time 04:53:18.286723 duration_in_ms=0.806
2018-10-13 04:53:18,287 [salt.state       :1770][INFO    ][3020] Running state [service.systemctl_reload] at time 04:53:18.286967
2018-10-13 04:53:18,287 [salt.state       :1803][INFO    ][3020] Executing state module.mod_watch for [service.systemctl_reload]
2018-10-13 04:53:18,287 [salt.utils.decorators:613 ][WARNING ][3020] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-13 04:53:18,288 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-10-13 04:53:18,433 [salt.state       :290 ][INFO    ][3020] {'ret': True}
2018-10-13 04:53:18,435 [salt.state       :1941][INFO    ][3020] Completed state [service.systemctl_reload] at time 04:53:18.434107 duration_in_ms=147.139
2018-10-13 04:53:18,435 [salt.state       :1770][INFO    ][3020] Running state [/etc/issue] at time 04:53:18.435769
2018-10-13 04:53:18,436 [salt.state       :1803][INFO    ][3020] Executing state file.managed for [/etc/issue]
2018-10-13 04:53:18,441 [salt.state       :290 ][INFO    ][3020] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-10-13 04:53:18,441 [salt.state       :1941][INFO    ][3020] Completed state [/etc/issue] at time 04:53:18.441396 duration_in_ms=5.627
2018-10-13 04:53:18,441 [salt.state       :1770][INFO    ][3020] Running state [/etc/hostname] at time 04:53:18.441667
2018-10-13 04:53:18,441 [salt.state       :1803][INFO    ][3020] Executing state file.managed for [/etc/hostname]
2018-10-13 04:53:18,462 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-10-13 04:53:18,476 [salt.state       :290 ][INFO    ][3020] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb01

2018-10-13 04:53:18,477 [salt.state       :1941][INFO    ][3020] Completed state [/etc/hostname] at time 04:53:18.477109 duration_in_ms=35.441
2018-10-13 04:53:18,480 [salt.state       :1770][INFO    ][3020] Running state [hostname mdb01] at time 04:53:18.480021
2018-10-13 04:53:18,481 [salt.state       :1803][INFO    ][3020] Executing state cmd.run for [hostname mdb01]
2018-10-13 04:53:18,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'test "$(hostname)" = "mdb01"' in directory '/root'
2018-10-13 04:53:18,509 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command 'hostname mdb01' in directory '/root'
2018-10-13 04:53:18,534 [salt.state       :290 ][INFO    ][3020] {'pid': 5301, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-13 04:53:18,535 [salt.state       :1941][INFO    ][3020] Completed state [hostname mdb01] at time 04:53:18.534870 duration_in_ms=54.848
2018-10-13 04:53:18,539 [salt.state       :1770][INFO    ][3020] Running state [mdb02] at time 04:53:18.539346
2018-10-13 04:53:18,540 [salt.state       :1803][INFO    ][3020] Executing state host.present for [mdb02]
2018-10-13 04:53:18,542 [salt.state       :290 ][INFO    ][3020] {'host': 'mdb02'}
2018-10-13 04:53:18,542 [salt.state       :1941][INFO    ][3020] Completed state [mdb02] at time 04:53:18.542295 duration_in_ms=2.949
2018-10-13 04:53:18,542 [salt.state       :1770][INFO    ][3020] Running state [mdb02.mcp-ovs-ha.local] at time 04:53:18.542883
2018-10-13 04:53:18,543 [salt.state       :1803][INFO    ][3020] Executing state host.present for [mdb02.mcp-ovs-ha.local]
2018-10-13 04:53:18,544 [salt.state       :290 ][INFO    ][3020] {'host': 'mdb02.mcp-ovs-ha.local'}
2018-10-13 04:53:18,544 [salt.state       :1941][INFO    ][3020] Completed state [mdb02.mcp-ovs-ha.local] at time 04:53:18.544691 duration_in_ms=1.808
2018-10-13 04:53:18,545 [salt.state       :1770][INFO    ][3020] Running state [mdb03] at time 04:53:18.545104
2018-10-13 04:53:18,545 [salt.state       :1803][INFO    ][3020] Executing state host.present for [mdb03]
2018-10-13 04:53:18,573 [salt.state       :290 ][INFO    ][3020] {'host': 'mdb03'}
2018-10-13 04:53:18,574 [salt.state       :1941][INFO    ][3020] Completed state [mdb03] at time 04:53:18.574101 duration_in_ms=28.998
2018-10-13 04:53:18,574 [salt.state       :1770][INFO    ][3020] Running state [mdb03.mcp-ovs-ha.local] at time 04:53:18.574456
2018-10-13 04:53:18,575 [salt.state       :1803][INFO    ][3020] Executing state host.present for [mdb03.mcp-ovs-ha.local]
2018-10-13 04:53:18,581 [salt.state       :290 ][INFO    ][3020] {'host': 'mdb03.mcp-ovs-ha.local'}
2018-10-13 04:53:18,582 [salt.state       :1941][INFO    ][3020] Completed state [mdb03.mcp-ovs-ha.local] at time 04:53:18.582319 duration_in_ms=7.863
2018-10-13 04:53:18,582 [salt.state       :1770][INFO    ][3020] Running state [mdb01] at time 04:53:18.582642
2018-10-13 04:53:18,582 [salt.state       :1803][INFO    ][3020] Executing state host.present for [mdb01]
2018-10-13 04:53:18,585 [salt.state       :290 ][INFO    ][3020] {'host': 'mdb01'}
2018-10-13 04:53:18,585 [salt.state       :1941][INFO    ][3020] Completed state [mdb01] at time 04:53:18.585631 duration_in_ms=2.989
2018-10-13 04:53:18,586 [salt.state       :1770][INFO    ][3020] Running state [mdb01.mcp-ovs-ha.local] at time 04:53:18.585960
2018-10-13 04:53:18,586 [salt.state       :1803][INFO    ][3020] Executing state host.present for [mdb01.mcp-ovs-ha.local]
2018-10-13 04:53:18,587 [salt.state       :290 ][INFO    ][3020] {'host': 'mdb01.mcp-ovs-ha.local'}
2018-10-13 04:53:18,587 [salt.state       :1941][INFO    ][3020] Completed state [mdb01.mcp-ovs-ha.local] at time 04:53:18.587436 duration_in_ms=1.476
2018-10-13 04:53:18,587 [salt.state       :1770][INFO    ][3020] Running state [mdb] at time 04:53:18.587754
2018-10-13 04:53:18,588 [salt.state       :1803][INFO    ][3020] Executing state host.present for [mdb]
2018-10-13 04:53:18,593 [salt.state       :290 ][INFO    ][3020] {'host': 'mdb'}
2018-10-13 04:53:18,594 [salt.state       :1941][INFO    ][3020] Completed state [mdb] at time 04:53:18.594160 duration_in_ms=6.406
2018-10-13 04:53:18,594 [salt.state       :1770][INFO    ][3020] Running state [mdb.mcp-ovs-ha.local] at time 04:53:18.594484
2018-10-13 04:53:18,595 [salt.state       :1803][INFO    ][3020] Executing state host.present for [mdb.mcp-ovs-ha.local]
2018-10-13 04:53:18,596 [salt.state       :290 ][INFO    ][3020] {'host': 'mdb.mcp-ovs-ha.local'}
2018-10-13 04:53:18,596 [salt.state       :1941][INFO    ][3020] Completed state [mdb.mcp-ovs-ha.local] at time 04:53:18.596216 duration_in_ms=1.732
2018-10-13 04:53:18,596 [salt.state       :1770][INFO    ][3020] Running state [cfg01] at time 04:53:18.596527
2018-10-13 04:53:18,597 [salt.state       :1803][INFO    ][3020] Executing state host.present for [cfg01]
2018-10-13 04:53:18,598 [salt.state       :290 ][INFO    ][3020] {'host': 'cfg01'}
2018-10-13 04:53:18,598 [salt.state       :1941][INFO    ][3020] Completed state [cfg01] at time 04:53:18.598474 duration_in_ms=1.947
2018-10-13 04:53:18,598 [salt.state       :1770][INFO    ][3020] Running state [cfg01.mcp-ovs-ha.local] at time 04:53:18.598814
2018-10-13 04:53:18,599 [salt.state       :1803][INFO    ][3020] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-13 04:53:18,601 [salt.state       :290 ][INFO    ][3020] {'host': 'cfg01.mcp-ovs-ha.local'}
2018-10-13 04:53:18,601 [salt.state       :1941][INFO    ][3020] Completed state [cfg01.mcp-ovs-ha.local] at time 04:53:18.601379 duration_in_ms=2.565
2018-10-13 04:53:18,602 [salt.state       :1770][INFO    ][3020] Running state [prx01] at time 04:53:18.601972
2018-10-13 04:53:18,602 [salt.state       :1803][INFO    ][3020] Executing state host.present for [prx01]
2018-10-13 04:53:18,604 [salt.state       :290 ][INFO    ][3020] {'host': 'prx01'}
2018-10-13 04:53:18,604 [salt.state       :1941][INFO    ][3020] Completed state [prx01] at time 04:53:18.604303 duration_in_ms=2.331
2018-10-13 04:53:18,604 [salt.state       :1770][INFO    ][3020] Running state [prx01.mcp-ovs-ha.local] at time 04:53:18.604621
2018-10-13 04:53:18,604 [salt.state       :1803][INFO    ][3020] Executing state host.present for [prx01.mcp-ovs-ha.local]
2018-10-13 04:53:18,605 [salt.state       :290 ][INFO    ][3020] {'host': 'prx01.mcp-ovs-ha.local'}
2018-10-13 04:53:18,606 [salt.state       :1941][INFO    ][3020] Completed state [prx01.mcp-ovs-ha.local] at time 04:53:18.606038 duration_in_ms=1.416
2018-10-13 04:53:18,606 [salt.state       :1770][INFO    ][3020] Running state [kvm01] at time 04:53:18.606349
2018-10-13 04:53:18,606 [salt.state       :1803][INFO    ][3020] Executing state host.present for [kvm01]
2018-10-13 04:53:18,607 [salt.state       :290 ][INFO    ][3020] {'host': 'kvm01'}
2018-10-13 04:53:18,608 [salt.state       :1941][INFO    ][3020] Completed state [kvm01] at time 04:53:18.608109 duration_in_ms=1.759
2018-10-13 04:53:18,609 [salt.state       :1770][INFO    ][3020] Running state [kvm01.mcp-ovs-ha.local] at time 04:53:18.608428
2018-10-13 04:53:18,609 [salt.state       :1803][INFO    ][3020] Executing state host.present for [kvm01.mcp-ovs-ha.local]
2018-10-13 04:53:18,610 [salt.state       :290 ][INFO    ][3020] {'host': 'kvm01.mcp-ovs-ha.local'}
2018-10-13 04:53:18,610 [salt.state       :1941][INFO    ][3020] Completed state [kvm01.mcp-ovs-ha.local] at time 04:53:18.610688 duration_in_ms=2.259
2018-10-13 04:53:18,611 [salt.state       :1770][INFO    ][3020] Running state [kvm03] at time 04:53:18.611046
2018-10-13 04:53:18,611 [salt.state       :1803][INFO    ][3020] Executing state host.present for [kvm03]
2018-10-13 04:53:18,612 [salt.state       :290 ][INFO    ][3020] {'host': 'kvm03'}
2018-10-13 04:53:18,613 [salt.state       :1941][INFO    ][3020] Completed state [kvm03] at time 04:53:18.613060 duration_in_ms=2.014
2018-10-13 04:53:18,613 [salt.state       :1770][INFO    ][3020] Running state [kvm03.mcp-ovs-ha.local] at time 04:53:18.613384
2018-10-13 04:53:18,613 [salt.state       :1803][INFO    ][3020] Executing state host.present for [kvm03.mcp-ovs-ha.local]
2018-10-13 04:53:18,614 [salt.state       :290 ][INFO    ][3020] {'host': 'kvm03.mcp-ovs-ha.local'}
2018-10-13 04:53:18,614 [salt.state       :1941][INFO    ][3020] Completed state [kvm03.mcp-ovs-ha.local] at time 04:53:18.614857 duration_in_ms=1.473
2018-10-13 04:53:18,615 [salt.state       :1770][INFO    ][3020] Running state [kvm02] at time 04:53:18.615178
2018-10-13 04:53:18,615 [salt.state       :1803][INFO    ][3020] Executing state host.present for [kvm02]
2018-10-13 04:53:18,616 [salt.state       :290 ][INFO    ][3020] {'host': 'kvm02'}
2018-10-13 04:53:18,616 [salt.state       :1941][INFO    ][3020] Completed state [kvm02] at time 04:53:18.616947 duration_in_ms=1.769
2018-10-13 04:53:18,617 [salt.state       :1770][INFO    ][3020] Running state [kvm02.mcp-ovs-ha.local] at time 04:53:18.617264
2018-10-13 04:53:18,617 [salt.state       :1803][INFO    ][3020] Executing state host.present for [kvm02.mcp-ovs-ha.local]
2018-10-13 04:53:18,618 [salt.state       :290 ][INFO    ][3020] {'host': 'kvm02.mcp-ovs-ha.local'}
2018-10-13 04:53:18,618 [salt.state       :1941][INFO    ][3020] Completed state [kvm02.mcp-ovs-ha.local] at time 04:53:18.618716 duration_in_ms=1.452
2018-10-13 04:53:18,619 [salt.state       :1770][INFO    ][3020] Running state [dbs] at time 04:53:18.619074
2018-10-13 04:53:18,619 [salt.state       :1803][INFO    ][3020] Executing state host.present for [dbs]
2018-10-13 04:53:18,620 [salt.state       :290 ][INFO    ][3020] {'host': 'dbs'}
2018-10-13 04:53:18,621 [salt.state       :1941][INFO    ][3020] Completed state [dbs] at time 04:53:18.621146 duration_in_ms=2.072
2018-10-13 04:53:18,621 [salt.state       :1770][INFO    ][3020] Running state [dbs.mcp-ovs-ha.local] at time 04:53:18.621477
2018-10-13 04:53:18,621 [salt.state       :1803][INFO    ][3020] Executing state host.present for [dbs.mcp-ovs-ha.local]
2018-10-13 04:53:18,622 [salt.state       :290 ][INFO    ][3020] {'host': 'dbs.mcp-ovs-ha.local'}
2018-10-13 04:53:18,623 [salt.state       :1941][INFO    ][3020] Completed state [dbs.mcp-ovs-ha.local] at time 04:53:18.623013 duration_in_ms=1.536
2018-10-13 04:53:18,623 [salt.state       :1770][INFO    ][3020] Running state [prx] at time 04:53:18.623333
2018-10-13 04:53:18,623 [salt.state       :1803][INFO    ][3020] Executing state host.present for [prx]
2018-10-13 04:53:18,624 [salt.state       :290 ][INFO    ][3020] {'host': 'prx'}
2018-10-13 04:53:18,625 [salt.state       :1941][INFO    ][3020] Completed state [prx] at time 04:53:18.625425 duration_in_ms=2.092
2018-10-13 04:53:18,626 [salt.state       :1770][INFO    ][3020] Running state [prx.mcp-ovs-ha.local] at time 04:53:18.626031
2018-10-13 04:53:18,626 [salt.state       :1803][INFO    ][3020] Executing state host.present for [prx.mcp-ovs-ha.local]
2018-10-13 04:53:18,627 [salt.state       :290 ][INFO    ][3020] {'host': 'prx.mcp-ovs-ha.local'}
2018-10-13 04:53:18,629 [salt.state       :1941][INFO    ][3020] Completed state [prx.mcp-ovs-ha.local] at time 04:53:18.628832 duration_in_ms=2.801
2018-10-13 04:53:18,629 [salt.state       :1770][INFO    ][3020] Running state [prx02] at time 04:53:18.629436
2018-10-13 04:53:18,629 [salt.state       :1803][INFO    ][3020] Executing state host.present for [prx02]
2018-10-13 04:53:18,630 [salt.state       :290 ][INFO    ][3020] {'host': 'prx02'}
2018-10-13 04:53:18,631 [salt.state       :1941][INFO    ][3020] Completed state [prx02] at time 04:53:18.630962 duration_in_ms=1.526
2018-10-13 04:53:18,631 [salt.state       :1770][INFO    ][3020] Running state [prx02.mcp-ovs-ha.local] at time 04:53:18.631287
2018-10-13 04:53:18,634 [salt.state       :1803][INFO    ][3020] Executing state host.present for [prx02.mcp-ovs-ha.local]
2018-10-13 04:53:18,636 [salt.state       :290 ][INFO    ][3020] {'host': 'prx02.mcp-ovs-ha.local'}
2018-10-13 04:53:18,636 [salt.state       :1941][INFO    ][3020] Completed state [prx02.mcp-ovs-ha.local] at time 04:53:18.636412 duration_in_ms=5.125
2018-10-13 04:53:18,636 [salt.state       :1770][INFO    ][3020] Running state [msg02] at time 04:53:18.636738
2018-10-13 04:53:18,637 [salt.state       :1803][INFO    ][3020] Executing state host.present for [msg02]
2018-10-13 04:53:18,638 [salt.state       :290 ][INFO    ][3020] {'host': 'msg02'}
2018-10-13 04:53:18,638 [salt.state       :1941][INFO    ][3020] Completed state [msg02] at time 04:53:18.638231 duration_in_ms=1.493
2018-10-13 04:53:18,638 [salt.state       :1770][INFO    ][3020] Running state [msg02.mcp-ovs-ha.local] at time 04:53:18.638556
2018-10-13 04:53:18,638 [salt.state       :1803][INFO    ][3020] Executing state host.present for [msg02.mcp-ovs-ha.local]
2018-10-13 04:53:18,640 [salt.state       :290 ][INFO    ][3020] {'host': 'msg02.mcp-ovs-ha.local'}
2018-10-13 04:53:18,640 [salt.state       :1941][INFO    ][3020] Completed state [msg02.mcp-ovs-ha.local] at time 04:53:18.640696 duration_in_ms=2.14
2018-10-13 04:53:18,641 [salt.state       :1770][INFO    ][3020] Running state [msg03] at time 04:53:18.641023
2018-10-13 04:53:18,641 [salt.state       :1803][INFO    ][3020] Executing state host.present for [msg03]
2018-10-13 04:53:18,642 [salt.state       :290 ][INFO    ][3020] {'host': 'msg03'}
2018-10-13 04:53:18,642 [salt.state       :1941][INFO    ][3020] Completed state [msg03] at time 04:53:18.642536 duration_in_ms=1.513
2018-10-13 04:53:18,643 [salt.state       :1770][INFO    ][3020] Running state [msg03.mcp-ovs-ha.local] at time 04:53:18.642909
2018-10-13 04:53:18,644 [salt.state       :1803][INFO    ][3020] Executing state host.present for [msg03.mcp-ovs-ha.local]
2018-10-13 04:53:18,645 [salt.state       :290 ][INFO    ][3020] {'host': 'msg03.mcp-ovs-ha.local'}
2018-10-13 04:53:18,645 [salt.state       :1941][INFO    ][3020] Completed state [msg03.mcp-ovs-ha.local] at time 04:53:18.645594 duration_in_ms=2.685
2018-10-13 04:53:18,645 [salt.state       :1770][INFO    ][3020] Running state [msg01] at time 04:53:18.645926
2018-10-13 04:53:18,646 [salt.state       :1803][INFO    ][3020] Executing state host.present for [msg01]
2018-10-13 04:53:18,647 [salt.state       :290 ][INFO    ][3020] {'host': 'msg01'}
2018-10-13 04:53:18,647 [salt.state       :1941][INFO    ][3020] Completed state [msg01] at time 04:53:18.647504 duration_in_ms=1.578
2018-10-13 04:53:18,647 [salt.state       :1770][INFO    ][3020] Running state [msg01.mcp-ovs-ha.local] at time 04:53:18.647847
2018-10-13 04:53:18,648 [salt.state       :1803][INFO    ][3020] Executing state host.present for [msg01.mcp-ovs-ha.local]
2018-10-13 04:53:18,649 [salt.state       :290 ][INFO    ][3020] {'host': 'msg01.mcp-ovs-ha.local'}
2018-10-13 04:53:18,649 [salt.state       :1941][INFO    ][3020] Completed state [msg01.mcp-ovs-ha.local] at time 04:53:18.649389 duration_in_ms=1.542
2018-10-13 04:53:18,649 [salt.state       :1770][INFO    ][3020] Running state [msg] at time 04:53:18.649723
2018-10-13 04:53:18,649 [salt.state       :1803][INFO    ][3020] Executing state host.present for [msg]
2018-10-13 04:53:18,651 [salt.state       :290 ][INFO    ][3020] {'host': 'msg'}
2018-10-13 04:53:18,652 [salt.state       :1941][INFO    ][3020] Completed state [msg] at time 04:53:18.652201 duration_in_ms=2.478
2018-10-13 04:53:18,653 [salt.state       :1770][INFO    ][3020] Running state [msg.mcp-ovs-ha.local] at time 04:53:18.653112
2018-10-13 04:53:18,653 [salt.state       :1803][INFO    ][3020] Executing state host.present for [msg.mcp-ovs-ha.local]
2018-10-13 04:53:18,654 [salt.state       :290 ][INFO    ][3020] {'host': 'msg.mcp-ovs-ha.local'}
2018-10-13 04:53:18,654 [salt.state       :1941][INFO    ][3020] Completed state [msg.mcp-ovs-ha.local] at time 04:53:18.654680 duration_in_ms=1.568
2018-10-13 04:53:18,655 [salt.state       :1770][INFO    ][3020] Running state [cfg01] at time 04:53:18.655051
2018-10-13 04:53:18,655 [salt.state       :1803][INFO    ][3020] Executing state host.present for [cfg01]
2018-10-13 04:53:18,655 [salt.state       :290 ][INFO    ][3020] Host cfg01 (192.168.10.11) already present
2018-10-13 04:53:18,656 [salt.state       :1941][INFO    ][3020] Completed state [cfg01] at time 04:53:18.655987 duration_in_ms=0.936
2018-10-13 04:53:18,656 [salt.state       :1770][INFO    ][3020] Running state [cfg01.mcp-ovs-ha.local] at time 04:53:18.656315
2018-10-13 04:53:18,656 [salt.state       :1803][INFO    ][3020] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-13 04:53:18,657 [salt.state       :290 ][INFO    ][3020] Host cfg01.mcp-ovs-ha.local (192.168.10.11) already present
2018-10-13 04:53:18,657 [salt.state       :1941][INFO    ][3020] Completed state [cfg01.mcp-ovs-ha.local] at time 04:53:18.657220 duration_in_ms=0.905
2018-10-13 04:53:18,657 [salt.state       :1770][INFO    ][3020] Running state [cmp002] at time 04:53:18.657559
2018-10-13 04:53:18,657 [salt.state       :1803][INFO    ][3020] Executing state host.present for [cmp002]
2018-10-13 04:53:18,662 [salt.state       :290 ][INFO    ][3020] {'host': 'cmp002'}
2018-10-13 04:53:18,662 [salt.state       :1941][INFO    ][3020] Completed state [cmp002] at time 04:53:18.662302 duration_in_ms=4.742
2018-10-13 04:53:18,662 [salt.state       :1770][INFO    ][3020] Running state [cmp002.mcp-ovs-ha.local] at time 04:53:18.662648
2018-10-13 04:53:18,662 [salt.state       :1803][INFO    ][3020] Executing state host.present for [cmp002.mcp-ovs-ha.local]
2018-10-13 04:53:18,664 [salt.state       :290 ][INFO    ][3020] {'host': 'cmp002.mcp-ovs-ha.local'}
2018-10-13 04:53:18,664 [salt.state       :1941][INFO    ][3020] Completed state [cmp002.mcp-ovs-ha.local] at time 04:53:18.664862 duration_in_ms=2.214
2018-10-13 04:53:18,665 [salt.state       :1770][INFO    ][3020] Running state [cmp001] at time 04:53:18.665220
2018-10-13 04:53:18,665 [salt.state       :1803][INFO    ][3020] Executing state host.present for [cmp001]
2018-10-13 04:53:18,666 [salt.state       :290 ][INFO    ][3020] {'host': 'cmp001'}
2018-10-13 04:53:18,666 [salt.state       :1941][INFO    ][3020] Completed state [cmp001] at time 04:53:18.666816 duration_in_ms=1.596
2018-10-13 04:53:18,667 [salt.state       :1770][INFO    ][3020] Running state [cmp001.mcp-ovs-ha.local] at time 04:53:18.667175
2018-10-13 04:53:18,667 [salt.state       :1803][INFO    ][3020] Executing state host.present for [cmp001.mcp-ovs-ha.local]
2018-10-13 04:53:18,669 [salt.state       :290 ][INFO    ][3020] {'host': 'cmp001.mcp-ovs-ha.local'}
2018-10-13 04:53:18,669 [salt.state       :1941][INFO    ][3020] Completed state [cmp001.mcp-ovs-ha.local] at time 04:53:18.669617 duration_in_ms=2.442
2018-10-13 04:53:18,670 [salt.state       :1770][INFO    ][3020] Running state [dbs01] at time 04:53:18.669960
2018-10-13 04:53:18,670 [salt.state       :1803][INFO    ][3020] Executing state host.present for [dbs01]
2018-10-13 04:53:18,671 [salt.state       :290 ][INFO    ][3020] {'host': 'dbs01'}
2018-10-13 04:53:18,671 [salt.state       :1941][INFO    ][3020] Completed state [dbs01] at time 04:53:18.671600 duration_in_ms=1.64
2018-10-13 04:53:18,671 [salt.state       :1770][INFO    ][3020] Running state [dbs01.mcp-ovs-ha.local] at time 04:53:18.671950
2018-10-13 04:53:18,672 [salt.state       :1803][INFO    ][3020] Executing state host.present for [dbs01.mcp-ovs-ha.local]
2018-10-13 04:53:18,673 [salt.state       :290 ][INFO    ][3020] {'host': 'dbs01.mcp-ovs-ha.local'}
2018-10-13 04:53:18,673 [salt.state       :1941][INFO    ][3020] Completed state [dbs01.mcp-ovs-ha.local] at time 04:53:18.673831 duration_in_ms=1.882
2018-10-13 04:53:18,674 [salt.state       :1770][INFO    ][3020] Running state [dbs02] at time 04:53:18.674177
2018-10-13 04:53:18,674 [salt.state       :1803][INFO    ][3020] Executing state host.present for [dbs02]
2018-10-13 04:53:18,676 [salt.state       :290 ][INFO    ][3020] {'host': 'dbs02'}
2018-10-13 04:53:18,677 [salt.state       :1941][INFO    ][3020] Completed state [dbs02] at time 04:53:18.676957 duration_in_ms=2.78
2018-10-13 04:53:18,677 [salt.state       :1770][INFO    ][3020] Running state [dbs02.mcp-ovs-ha.local] at time 04:53:18.677304
2018-10-13 04:53:18,677 [salt.state       :1803][INFO    ][3020] Executing state host.present for [dbs02.mcp-ovs-ha.local]
2018-10-13 04:53:18,678 [salt.state       :290 ][INFO    ][3020] {'host': 'dbs02.mcp-ovs-ha.local'}
2018-10-13 04:53:18,678 [salt.state       :1941][INFO    ][3020] Completed state [dbs02.mcp-ovs-ha.local] at time 04:53:18.678943 duration_in_ms=1.639
2018-10-13 04:53:18,679 [salt.state       :1770][INFO    ][3020] Running state [dbs03] at time 04:53:18.679299
2018-10-13 04:53:18,679 [salt.state       :1803][INFO    ][3020] Executing state host.present for [dbs03]
2018-10-13 04:53:18,681 [salt.state       :290 ][INFO    ][3020] {'host': 'dbs03'}
2018-10-13 04:53:18,681 [salt.state       :1941][INFO    ][3020] Completed state [dbs03] at time 04:53:18.681196 duration_in_ms=1.897
2018-10-13 04:53:18,681 [salt.state       :1770][INFO    ][3020] Running state [dbs03.mcp-ovs-ha.local] at time 04:53:18.681540
2018-10-13 04:53:18,681 [salt.state       :1803][INFO    ][3020] Executing state host.present for [dbs03.mcp-ovs-ha.local]
2018-10-13 04:53:18,731 [salt.state       :290 ][INFO    ][3020] {'host': 'dbs03.mcp-ovs-ha.local'}
2018-10-13 04:53:18,731 [salt.state       :1941][INFO    ][3020] Completed state [dbs03.mcp-ovs-ha.local] at time 04:53:18.731666 duration_in_ms=50.126
2018-10-13 04:53:18,732 [salt.state       :1770][INFO    ][3020] Running state [mas01] at time 04:53:18.732033
2018-10-13 04:53:18,733 [salt.state       :1803][INFO    ][3020] Executing state host.present for [mas01]
2018-10-13 04:53:18,734 [salt.state       :290 ][INFO    ][3020] {'host': 'mas01'}
2018-10-13 04:53:18,735 [salt.state       :1941][INFO    ][3020] Completed state [mas01] at time 04:53:18.735441 duration_in_ms=3.408
2018-10-13 04:53:18,736 [salt.state       :1770][INFO    ][3020] Running state [mas01.mcp-ovs-ha.local] at time 04:53:18.736435
2018-10-13 04:53:18,737 [salt.state       :1803][INFO    ][3020] Executing state host.present for [mas01.mcp-ovs-ha.local]
2018-10-13 04:53:18,739 [salt.state       :290 ][INFO    ][3020] {'host': 'mas01.mcp-ovs-ha.local'}
2018-10-13 04:53:18,740 [salt.state       :1941][INFO    ][3020] Completed state [mas01.mcp-ovs-ha.local] at time 04:53:18.740166 duration_in_ms=3.729
2018-10-13 04:53:18,741 [salt.state       :1770][INFO    ][3020] Running state [ctl02] at time 04:53:18.741904
2018-10-13 04:53:18,742 [salt.state       :1803][INFO    ][3020] Executing state host.present for [ctl02]
2018-10-13 04:53:18,744 [salt.state       :290 ][INFO    ][3020] {'host': 'ctl02'}
2018-10-13 04:53:18,745 [salt.state       :1941][INFO    ][3020] Completed state [ctl02] at time 04:53:18.744998 duration_in_ms=3.095
2018-10-13 04:53:18,745 [salt.state       :1770][INFO    ][3020] Running state [ctl02.mcp-ovs-ha.local] at time 04:53:18.745349
2018-10-13 04:53:18,745 [salt.state       :1803][INFO    ][3020] Executing state host.present for [ctl02.mcp-ovs-ha.local]
2018-10-13 04:53:18,746 [salt.state       :290 ][INFO    ][3020] {'host': 'ctl02.mcp-ovs-ha.local'}
2018-10-13 04:53:18,747 [salt.state       :1941][INFO    ][3020] Completed state [ctl02.mcp-ovs-ha.local] at time 04:53:18.747020 duration_in_ms=1.671
2018-10-13 04:53:18,747 [salt.state       :1770][INFO    ][3020] Running state [ctl03] at time 04:53:18.747392
2018-10-13 04:53:18,747 [salt.state       :1803][INFO    ][3020] Executing state host.present for [ctl03]
2018-10-13 04:53:18,749 [salt.state       :290 ][INFO    ][3020] {'host': 'ctl03'}
2018-10-13 04:53:18,749 [salt.state       :1941][INFO    ][3020] Completed state [ctl03] at time 04:53:18.749614 duration_in_ms=2.222
2018-10-13 04:53:18,750 [salt.state       :1770][INFO    ][3020] Running state [ctl03.mcp-ovs-ha.local] at time 04:53:18.749967
2018-10-13 04:53:18,750 [salt.state       :1803][INFO    ][3020] Executing state host.present for [ctl03.mcp-ovs-ha.local]
2018-10-13 04:53:18,751 [salt.state       :290 ][INFO    ][3020] {'host': 'ctl03.mcp-ovs-ha.local'}
2018-10-13 04:53:18,752 [salt.state       :1941][INFO    ][3020] Completed state [ctl03.mcp-ovs-ha.local] at time 04:53:18.751967 duration_in_ms=2.0
2018-10-13 04:53:18,752 [salt.state       :1770][INFO    ][3020] Running state [ctl01] at time 04:53:18.752325
2018-10-13 04:53:18,752 [salt.state       :1803][INFO    ][3020] Executing state host.present for [ctl01]
2018-10-13 04:53:18,753 [salt.state       :290 ][INFO    ][3020] {'host': 'ctl01'}
2018-10-13 04:53:18,754 [salt.state       :1941][INFO    ][3020] Completed state [ctl01] at time 04:53:18.754288 duration_in_ms=1.963
2018-10-13 04:53:18,754 [salt.state       :1770][INFO    ][3020] Running state [ctl01.mcp-ovs-ha.local] at time 04:53:18.754645
2018-10-13 04:53:18,754 [salt.state       :1803][INFO    ][3020] Executing state host.present for [ctl01.mcp-ovs-ha.local]
2018-10-13 04:53:18,757 [salt.state       :290 ][INFO    ][3020] {'host': 'ctl01.mcp-ovs-ha.local'}
2018-10-13 04:53:18,757 [salt.state       :1941][INFO    ][3020] Completed state [ctl01.mcp-ovs-ha.local] at time 04:53:18.757642 duration_in_ms=2.997
2018-10-13 04:53:18,758 [salt.state       :1770][INFO    ][3020] Running state [ctl] at time 04:53:18.758010
2018-10-13 04:53:18,758 [salt.state       :1803][INFO    ][3020] Executing state host.present for [ctl]
2018-10-13 04:53:18,759 [salt.state       :290 ][INFO    ][3020] {'host': 'ctl'}
2018-10-13 04:53:18,760 [salt.state       :1941][INFO    ][3020] Completed state [ctl] at time 04:53:18.760031 duration_in_ms=2.021
2018-10-13 04:53:18,760 [salt.state       :1770][INFO    ][3020] Running state [ctl.mcp-ovs-ha.local] at time 04:53:18.760390
2018-10-13 04:53:18,760 [salt.state       :1803][INFO    ][3020] Executing state host.present for [ctl.mcp-ovs-ha.local]
2018-10-13 04:53:18,761 [salt.state       :290 ][INFO    ][3020] {'host': 'ctl.mcp-ovs-ha.local'}
2018-10-13 04:53:18,762 [salt.state       :1941][INFO    ][3020] Completed state [ctl.mcp-ovs-ha.local] at time 04:53:18.762088 duration_in_ms=1.697
2018-10-13 04:53:18,762 [salt.state       :1770][INFO    ][3020] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 04:53:18.762348
2018-10-13 04:53:18,762 [salt.state       :1803][INFO    ][3020] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-10-13 04:53:18,763 [salt.state       :290 ][INFO    ][3020] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-10-13 04:53:18,763 [salt.state       :1941][INFO    ][3020] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 04:53:18.763262 duration_in_ms=0.914
2018-10-13 04:53:18,765 [salt.state       :1770][INFO    ][3020] Running state [ens3] at time 04:53:18.765112
2018-10-13 04:53:18,765 [salt.state       :1803][INFO    ][3020] Executing state network.managed for [ens3]
2018-10-13 04:53:18,877 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013045318858668
2018-10-13 04:53:18,909 [salt.minion      :1431][INFO    ][5305] Starting a new job with PID 5305
2018-10-13 04:53:18,942 [salt.minion      :1708][INFO    ][5305] Returning information for job: 20181013045318858668
2018-10-13 04:53:18,963 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['ifup', 'ens3'] in directory '/root'
2018-10-13 04:53:20,186 [salt.state       :290 ][INFO    ][3020] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-10-13 04:53:20,214 [salt.state       :1941][INFO    ][3020] Completed state [ens3] at time 04:53:20.214708 duration_in_ms=1449.595
2018-10-13 04:53:20,215 [salt.state       :1770][INFO    ][3020] Running state [ens2] at time 04:53:20.215710
2018-10-13 04:53:20,216 [salt.state       :1803][INFO    ][3020] Executing state network.managed for [ens2]
2018-10-13 04:53:20,272 [salt.state       :290 ][INFO    ][3020] {'interface': 'Added network interface.'}
2018-10-13 04:53:20,273 [salt.state       :1941][INFO    ][3020] Completed state [ens2] at time 04:53:20.273765 duration_in_ms=58.054
2018-10-13 04:53:20,274 [salt.state       :1770][INFO    ][3020] Running state [linux_system_network] at time 04:53:20.274500
2018-10-13 04:53:20,275 [salt.state       :1803][INFO    ][3020] Executing state network.system for [linux_system_network]
2018-10-13 04:53:20,276 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-10-13 04:53:20,307 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-10-13 04:53:20,345 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-10-13 04:53:20,384 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-10-13 04:53:20,977 [salt.loaded.int.module.debian_ip:1970][WARNING ][3020] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-10-13 04:53:20,984 [salt.state       :290 ][INFO    ][3020] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb01\n\n+DOMAIN=mcp-ovs-ha.local\n\n+SEARCH=maas\n'}
2018-10-13 04:53:20,985 [salt.state       :1941][INFO    ][3020] Completed state [linux_system_network] at time 04:53:20.985444 duration_in_ms=710.944
2018-10-13 04:53:20,986 [salt.state       :1770][INFO    ][3020] Running state [/etc/profile.d/proxy.sh] at time 04:53:20.986143
2018-10-13 04:53:20,987 [salt.state       :1803][INFO    ][3020] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-10-13 04:53:20,988 [salt.state       :290 ][INFO    ][3020] File /etc/profile.d/proxy.sh is not present
2018-10-13 04:53:20,989 [salt.state       :1941][INFO    ][3020] Completed state [/etc/profile.d/proxy.sh] at time 04:53:20.989356 duration_in_ms=3.213
2018-10-13 04:53:20,990 [salt.state       :1770][INFO    ][3020] Running state [/etc/apt/apt.conf.d/95proxies] at time 04:53:20.990743
2018-10-13 04:53:20,991 [salt.state       :1803][INFO    ][3020] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-10-13 04:53:20,992 [salt.state       :290 ][INFO    ][3020] File /etc/apt/apt.conf.d/95proxies is not present
2018-10-13 04:53:20,993 [salt.state       :1941][INFO    ][3020] Completed state [/etc/apt/apt.conf.d/95proxies] at time 04:53:20.993217 duration_in_ms=2.474
2018-10-13 04:53:20,997 [salt.state       :1770][INFO    ][3020] Running state [ntp] at time 04:53:20.997734
2018-10-13 04:53:20,998 [salt.state       :1803][INFO    ][3020] Executing state pkg.installed for [ntp]
2018-10-13 04:53:21,336 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 04:53:21,369 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-10-13 04:53:26,199 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 04:53:26,245 [salt.state       :290 ][INFO    ][3020] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-10-13 04:53:26,268 [salt.state       :905 ][INFO    ][3020] Loading fresh modules for state activity
2018-10-13 04:53:26,314 [salt.state       :1941][INFO    ][3020] Completed state [ntp] at time 04:53:26.314060 duration_in_ms=5316.325
2018-10-13 04:53:26,320 [salt.state       :1770][INFO    ][3020] Running state [/etc/ntp.conf] at time 04:53:26.320608
2018-10-13 04:53:26,321 [salt.state       :1803][INFO    ][3020] Executing state file.managed for [/etc/ntp.conf]
2018-10-13 04:53:26,345 [salt.fileclient  :1215][INFO    ][3020] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-10-13 04:53:26,427 [salt.state       :290 ][INFO    ][3020] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-10-13 04:53:26,436 [salt.state       :1941][INFO    ][3020] Completed state [/etc/ntp.conf] at time 04:53:26.436297 duration_in_ms=115.688
2018-10-13 04:53:27,024 [salt.state       :1770][INFO    ][3020] Running state [ntp] at time 04:53:27.024167
2018-10-13 04:53:27,025 [salt.state       :1803][INFO    ][3020] Executing state service.running for [ntp]
2018-10-13 04:53:27,026 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-10-13 04:53:27,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-13 04:53:27,065 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-10-13 04:53:27,085 [salt.state       :290 ][INFO    ][3020] The service ntp is already running
2018-10-13 04:53:27,086 [salt.state       :1941][INFO    ][3020] Completed state [ntp] at time 04:53:27.086083 duration_in_ms=61.917
2018-10-13 04:53:27,086 [salt.state       :1770][INFO    ][3020] Running state [ntp] at time 04:53:27.086410
2018-10-13 04:53:27,086 [salt.state       :1803][INFO    ][3020] Executing state service.mod_watch for [ntp]
2018-10-13 04:53:27,088 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-13 04:53:27,105 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3020] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-10-13 04:53:27,197 [salt.state       :290 ][INFO    ][3020] {'ntp': True}
2018-10-13 04:53:27,198 [salt.state       :1941][INFO    ][3020] Completed state [ntp] at time 04:53:27.198264 duration_in_ms=111.853
2018-10-13 04:53:27,210 [salt.minion      :1708][INFO    ][3020] Returning information for job: 20181013045232169032
2018-10-13 04:53:33,794 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181013045333785385
2018-10-13 04:53:33,828 [salt.minion      :1431][INFO    ][6459] Starting a new job with PID 6459
2018-10-13 04:53:33,857 [salt.minion      :1708][INFO    ][6459] Returning information for job: 20181013045333785385
2018-10-13 04:53:51,266 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command pkg.upgrade with jid 20181013045351258374
2018-10-13 04:53:51,300 [salt.minion      :1431][INFO    ][6594] Starting a new job with PID 6594
2018-10-13 04:53:51,329 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6594] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 04:53:51,827 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6594] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-10-13 04:53:56,293 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013045356281498
2018-10-13 04:53:56,321 [salt.minion      :1431][INFO    ][6739] Starting a new job with PID 6739
2018-10-13 04:53:56,348 [salt.minion      :1708][INFO    ][6739] Returning information for job: 20181013045356281498
2018-10-13 04:54:06,351 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013045406342004
2018-10-13 04:54:06,376 [salt.minion      :1431][INFO    ][6996] Starting a new job with PID 6996
2018-10-13 04:54:06,408 [salt.minion      :1708][INFO    ][6996] Returning information for job: 20181013045406342004
2018-10-13 04:54:16,466 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013045416453865
2018-10-13 04:54:16,500 [salt.minion      :1431][INFO    ][7700] Starting a new job with PID 7700
2018-10-13 04:54:16,530 [salt.minion      :1708][INFO    ][7700] Returning information for job: 20181013045416453865
2018-10-13 04:54:20,776 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6594] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 04:54:20,831 [salt.minion      :1708][INFO    ][6594] Returning information for job: 20181013045351258374
2018-10-13 04:54:37,347 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command test.ping with jid 20181013045437339901
2018-10-13 04:54:37,381 [salt.minion      :1431][INFO    ][7829] Starting a new job with PID 7829
2018-10-13 04:54:37,414 [salt.minion      :1708][INFO    ][7829] Returning information for job: 20181013045437339901
2018-10-13 04:56:17,827 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013045617819700
2018-10-13 04:56:17,852 [salt.minion      :1431][INFO    ][7834] Starting a new job with PID 7834
2018-10-13 04:56:18,866 [salt.state       :905 ][INFO    ][7834] Loading fresh modules for state activity
2018-10-13 04:56:18,932 [salt.fileclient  :1215][INFO    ][7834] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-10-13 04:56:18,966 [salt.fileclient  :1215][INFO    ][7834] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-10-13 04:56:19,784 [salt.state       :1770][INFO    ][7834] Running state [keepalived] at time 04:56:19.784229
2018-10-13 04:56:19,785 [salt.state       :1803][INFO    ][7834] Executing state pkg.installed for [keepalived]
2018-10-13 04:56:19,786 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 04:56:20,257 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-10-13 04:56:20,417 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-13 04:56:22,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 04:56:22,536 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-10-13 04:56:22,856 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013045622845994
2018-10-13 04:56:22,881 [salt.minion      :1431][INFO    ][8203] Starting a new job with PID 8203
2018-10-13 04:56:22,900 [salt.minion      :1708][INFO    ][8203] Returning information for job: 20181013045622845994
2018-10-13 04:56:27,368 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 04:56:27,415 [salt.state       :290 ][INFO    ][7834] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-10-13 04:56:27,441 [salt.state       :905 ][INFO    ][7834] Loading fresh modules for state activity
2018-10-13 04:56:27,491 [salt.state       :1941][INFO    ][7834] Completed state [keepalived] at time 04:56:27.491277 duration_in_ms=7707.049
2018-10-13 04:56:27,498 [salt.state       :1770][INFO    ][7834] Running state [lsof] at time 04:56:27.498385
2018-10-13 04:56:27,498 [salt.state       :1803][INFO    ][7834] Executing state pkg.installed for [lsof]
2018-10-13 04:56:28,252 [salt.state       :290 ][INFO    ][7834] All specified packages are already installed
2018-10-13 04:56:28,252 [salt.state       :1941][INFO    ][7834] Completed state [lsof] at time 04:56:28.252755 duration_in_ms=754.37
2018-10-13 04:56:28,258 [salt.state       :1770][INFO    ][7834] Running state [/etc/keepalived/keepalived.conf] at time 04:56:28.258896
2018-10-13 04:56:28,259 [salt.state       :1803][INFO    ][7834] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-13 04:56:28,291 [salt.fileclient  :1215][INFO    ][7834] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-10-13 04:56:28,351 [salt.state       :290 ][INFO    ][7834] File changed:
New file
2018-10-13 04:56:28,352 [salt.state       :1941][INFO    ][7834] Completed state [/etc/keepalived/keepalived.conf] at time 04:56:28.352170 duration_in_ms=93.274
2018-10-13 04:56:28,353 [salt.state       :1770][INFO    ][7834] Running state [keepalived] at time 04:56:28.353485
2018-10-13 04:56:28,353 [salt.state       :1803][INFO    ][7834] Executing state service.running for [keepalived]
2018-10-13 04:56:28,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-13 04:56:28,377 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-13 04:56:28,398 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-13 04:56:28,418 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-10-13 04:56:28,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-13 04:56:28,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-13 04:56:28,526 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7834] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-13 04:56:28,543 [salt.state       :290 ][INFO    ][7834] {'keepalived': True}
2018-10-13 04:56:28,544 [salt.state       :1941][INFO    ][7834] Completed state [keepalived] at time 04:56:28.544275 duration_in_ms=190.79
2018-10-13 04:56:28,546 [salt.minion      :1708][INFO    ][7834] Returning information for job: 20181013045617819700
2018-10-13 04:58:37,787 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command pillar.get with jid 20181013045837777381
2018-10-13 04:58:37,816 [salt.minion      :1431][INFO    ][9210] Starting a new job with PID 9210
2018-10-13 04:58:37,828 [salt.minion      :1708][INFO    ][9210] Returning information for job: 20181013045837777381
2018-10-13 05:11:09,782 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013051109764505
2018-10-13 05:11:09,804 [salt.minion      :1431][INFO    ][9265] Starting a new job with PID 9265
2018-10-13 05:11:16,047 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013051116032932
2018-10-13 05:11:16,075 [salt.minion      :1431][INFO    ][9270] Starting a new job with PID 9270
2018-10-13 05:11:16,095 [salt.minion      :1708][INFO    ][9270] Returning information for job: 20181013051116032932
2018-10-13 05:11:18,943 [salt.state       :905 ][INFO    ][9265] Loading fresh modules for state activity
2018-10-13 05:11:19,977 [salt.fileclient  :1215][INFO    ][9265] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-10-13 05:11:20,014 [salt.fileclient  :1215][INFO    ][9265] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-10-13 05:11:20,057 [salt.fileclient  :1215][INFO    ][9265] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-10-13 05:11:20,875 [salt.state       :1770][INFO    ][9265] Running state [memcached] at time 05:11:20.875380
2018-10-13 05:11:20,876 [salt.state       :1803][INFO    ][9265] Executing state pkg.installed for [memcached]
2018-10-13 05:11:20,877 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:11:21,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-10-13 05:11:21,556 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-13 05:11:23,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 05:11:23,901 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-10-13 05:11:26,187 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013051126174114
2018-10-13 05:11:26,220 [salt.minion      :1431][INFO    ][9972] Starting a new job with PID 9972
2018-10-13 05:11:26,242 [salt.minion      :1708][INFO    ][9972] Returning information for job: 20181013051126174114
2018-10-13 05:11:27,926 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:11:27,986 [salt.state       :290 ][INFO    ][9265] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-10-13 05:11:28,011 [salt.state       :905 ][INFO    ][9265] Loading fresh modules for state activity
2018-10-13 05:11:28,058 [salt.state       :1941][INFO    ][9265] Completed state [memcached] at time 05:11:28.058325 duration_in_ms=7182.946
2018-10-13 05:11:28,065 [salt.state       :1770][INFO    ][9265] Running state [python-memcache] at time 05:11:28.065859
2018-10-13 05:11:28,066 [salt.state       :1803][INFO    ][9265] Executing state pkg.installed for [python-memcache]
2018-10-13 05:11:28,946 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 05:11:28,984 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-10-13 05:11:31,413 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:11:31,462 [salt.state       :290 ][INFO    ][9265] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-10-13 05:11:31,485 [salt.state       :905 ][INFO    ][9265] Loading fresh modules for state activity
2018-10-13 05:11:31,533 [salt.state       :1941][INFO    ][9265] Completed state [python-memcache] at time 05:11:31.533883 duration_in_ms=3468.024
2018-10-13 05:11:31,538 [salt.state       :1770][INFO    ][9265] Running state [/etc/memcached.conf] at time 05:11:31.538901
2018-10-13 05:11:31,539 [salt.state       :1803][INFO    ][9265] Executing state file.managed for [/etc/memcached.conf]
2018-10-13 05:11:31,577 [salt.fileclient  :1215][INFO    ][9265] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-10-13 05:11:31,614 [salt.state       :290 ][INFO    ][9265] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-10-13 05:11:31,615 [salt.state       :1941][INFO    ][9265] Completed state [/etc/memcached.conf] at time 05:11:31.615020 duration_in_ms=76.119
2018-10-13 05:11:32,200 [salt.state       :1770][INFO    ][9265] Running state [memcached] at time 05:11:32.200815
2018-10-13 05:11:32,201 [salt.state       :1803][INFO    ][9265] Executing state service.running for [memcached]
2018-10-13 05:11:32,202 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-13 05:11:32,222 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-13 05:11:32,239 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-13 05:11:32,257 [salt.state       :290 ][INFO    ][9265] The service memcached is already running
2018-10-13 05:11:32,258 [salt.state       :1941][INFO    ][9265] Completed state [memcached] at time 05:11:32.258273 duration_in_ms=57.458
2018-10-13 05:11:32,258 [salt.state       :1770][INFO    ][9265] Running state [memcached] at time 05:11:32.258867
2018-10-13 05:11:32,259 [salt.state       :1803][INFO    ][9265] Executing state service.mod_watch for [memcached]
2018-10-13 05:11:32,260 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-13 05:11:32,281 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9265] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-10-13 05:11:32,321 [salt.state       :290 ][INFO    ][9265] {'memcached': True}
2018-10-13 05:11:32,321 [salt.state       :1941][INFO    ][9265] Completed state [memcached] at time 05:11:32.321488 duration_in_ms=62.621
2018-10-13 05:11:32,326 [salt.minion      :1708][INFO    ][9265] Returning information for job: 20181013051109764505
2018-10-13 05:11:33,928 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013051133912966
2018-10-13 05:11:33,952 [salt.minion      :1431][INFO    ][10260] Starting a new job with PID 10260
2018-10-13 05:11:40,231 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013051140217458
2018-10-13 05:11:40,258 [salt.minion      :1431][INFO    ][10267] Starting a new job with PID 10267
2018-10-13 05:11:40,280 [salt.minion      :1708][INFO    ][10267] Returning information for job: 20181013051140217458
2018-10-13 05:11:40,977 [salt.state       :905 ][INFO    ][10260] Loading fresh modules for state activity
2018-10-13 05:11:43,526 [salt.fileclient  :1215][INFO    ][10260] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-10-13 05:11:43,566 [salt.fileclient  :1215][INFO    ][10260] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-10-13 05:11:44,467 [salt.state       :1770][INFO    ][10260] Running state [haproxy] at time 05:11:44.467300
2018-10-13 05:11:44,468 [salt.state       :1803][INFO    ][10260] Executing state pkg.installed for [haproxy]
2018-10-13 05:11:44,469 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:11:44,973 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-10-13 05:11:45,137 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-13 05:11:47,575 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 05:11:47,617 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-10-13 05:11:50,380 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013051150365795
2018-10-13 05:11:50,419 [salt.minion      :1431][INFO    ][11012] Starting a new job with PID 11012
2018-10-13 05:11:50,448 [salt.minion      :1708][INFO    ][11012] Returning information for job: 20181013051150365795
2018-10-13 05:11:52,128 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:11:52,177 [salt.state       :290 ][INFO    ][10260] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-10-13 05:11:52,203 [salt.state       :905 ][INFO    ][10260] Loading fresh modules for state activity
2018-10-13 05:11:52,261 [salt.state       :1941][INFO    ][10260] Completed state [haproxy] at time 05:11:52.260387 duration_in_ms=7792.806
2018-10-13 05:11:52,266 [salt.state       :1770][INFO    ][10260] Running state [/etc/default/haproxy] at time 05:11:52.266718
2018-10-13 05:11:52,267 [salt.state       :1803][INFO    ][10260] Executing state file.managed for [/etc/default/haproxy]
2018-10-13 05:11:52,302 [salt.fileclient  :1215][INFO    ][10260] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-10-13 05:11:52,307 [salt.state       :290 ][INFO    ][10260] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-10-13 05:11:52,310 [salt.state       :1941][INFO    ][10260] Completed state [/etc/default/haproxy] at time 05:11:52.310487 duration_in_ms=43.769
2018-10-13 05:11:52,311 [salt.state       :1770][INFO    ][10260] Running state [/etc/haproxy/haproxy.cfg] at time 05:11:52.311096
2018-10-13 05:11:52,312 [salt.state       :1803][INFO    ][10260] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-13 05:11:52,332 [salt.fileclient  :1215][INFO    ][10260] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-10-13 05:11:52,557 [salt.state       :290 ][INFO    ][10260] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-10-13 05:11:52,567 [salt.state       :1941][INFO    ][10260] Completed state [/etc/haproxy/haproxy.cfg] at time 05:11:52.566999 duration_in_ms=255.903
2018-10-13 05:11:52,567 [salt.state       :1770][INFO    ][10260] Running state [/etc/haproxy/ssl] at time 05:11:52.567399
2018-10-13 05:11:52,568 [salt.state       :1803][INFO    ][10260] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-13 05:11:52,570 [salt.state       :290 ][INFO    ][10260] {'/etc/haproxy/ssl': 'New Dir'}
2018-10-13 05:11:52,570 [salt.state       :1941][INFO    ][10260] Completed state [/etc/haproxy/ssl] at time 05:11:52.570493 duration_in_ms=3.094
2018-10-13 05:11:52,571 [salt.state       :1770][INFO    ][10260] Running state [/etc/haproxy/errors/429.http11] at time 05:11:52.571132
2018-10-13 05:11:52,571 [salt.state       :1803][INFO    ][10260] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-13 05:11:52,598 [salt.fileclient  :1215][INFO    ][10260] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-10-13 05:11:52,610 [salt.state       :290 ][INFO    ][10260] File changed:
New file
2018-10-13 05:11:52,611 [salt.state       :1941][INFO    ][10260] Completed state [/etc/haproxy/errors/429.http11] at time 05:11:52.611510 duration_in_ms=40.378
2018-10-13 05:11:52,614 [salt.state       :1770][INFO    ][10260] Running state [haproxy_status_packages] at time 05:11:52.614783
2018-10-13 05:11:52,615 [salt.state       :1803][INFO    ][10260] Executing state pkg.installed for [haproxy_status_packages]
2018-10-13 05:11:53,474 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 05:11:53,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-10-13 05:11:56,000 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:11:56,053 [salt.state       :290 ][INFO    ][10260] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-10-13 05:11:56,076 [salt.state       :905 ][INFO    ][10260] Loading fresh modules for state activity
2018-10-13 05:11:56,126 [salt.state       :1941][INFO    ][10260] Completed state [haproxy_status_packages] at time 05:11:56.126460 duration_in_ms=3511.686
2018-10-13 05:11:56,131 [salt.state       :1770][INFO    ][10260] Running state [/usr/bin/haproxy-status.sh] at time 05:11:56.131381
2018-10-13 05:11:56,132 [salt.state       :1803][INFO    ][10260] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-13 05:11:56,156 [salt.fileclient  :1215][INFO    ][10260] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-10-13 05:11:56,188 [salt.state       :290 ][INFO    ][10260] File changed:
New file
2018-10-13 05:11:56,188 [salt.state       :1941][INFO    ][10260] Completed state [/usr/bin/haproxy-status.sh] at time 05:11:56.188647 duration_in_ms=57.266
2018-10-13 05:11:56,191 [salt.state       :1770][INFO    ][10260] Running state [net.ipv4.ip_nonlocal_bind] at time 05:11:56.191502
2018-10-13 05:11:56,191 [salt.state       :1803][INFO    ][10260] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-13 05:11:56,195 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-10-13 05:11:56,210 [salt.state       :290 ][INFO    ][10260] {'net.ipv4.ip_nonlocal_bind': 1}
2018-10-13 05:11:56,210 [salt.state       :1941][INFO    ][10260] Completed state [net.ipv4.ip_nonlocal_bind] at time 05:11:56.210906 duration_in_ms=19.403
2018-10-13 05:11:56,769 [salt.state       :1770][INFO    ][10260] Running state [haproxy] at time 05:11:56.769298
2018-10-13 05:11:56,769 [salt.state       :1803][INFO    ][10260] Executing state service.running for [haproxy]
2018-10-13 05:11:56,770 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-13 05:11:56,792 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-13 05:11:56,809 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-13 05:11:56,830 [salt.state       :290 ][INFO    ][10260] The service haproxy is already running
2018-10-13 05:11:56,832 [salt.state       :1941][INFO    ][10260] Completed state [haproxy] at time 05:11:56.832151 duration_in_ms=62.853
2018-10-13 05:11:56,832 [salt.state       :1770][INFO    ][10260] Running state [haproxy] at time 05:11:56.832750
2018-10-13 05:11:56,833 [salt.state       :1803][INFO    ][10260] Executing state service.mod_watch for [haproxy]
2018-10-13 05:11:56,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-13 05:11:56,857 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10260] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-10-13 05:11:56,910 [salt.state       :290 ][INFO    ][10260] {'haproxy': True}
2018-10-13 05:11:56,911 [salt.state       :1941][INFO    ][10260] Completed state [haproxy] at time 05:11:56.911243 duration_in_ms=78.492
2018-10-13 05:11:56,914 [salt.minion      :1708][INFO    ][10260] Returning information for job: 20181013051133912966
2018-10-13 05:11:58,418 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command service.status with jid 20181013051158405011
2018-10-13 05:11:58,442 [salt.minion      :1431][INFO    ][11442] Starting a new job with PID 11442
2018-10-13 05:11:59,041 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11442] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-13 05:11:59,061 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11442] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-13 05:11:59,080 [salt.minion      :1708][INFO    ][11442] Returning information for job: 20181013051158405011
2018-10-13 05:12:00,475 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command service.restart with jid 20181013051200461039
2018-10-13 05:12:00,498 [salt.minion      :1431][INFO    ][11450] Starting a new job with PID 11450
2018-10-13 05:12:01,094 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11450] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-13 05:12:01,134 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11450] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-13 05:12:01,176 [salt.minion      :1708][INFO    ][11450] Returning information for job: 20181013051200461039
2018-10-13 05:30:38,615 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command test.ping with jid 20181013053038602489
2018-10-13 05:30:38,642 [salt.minion      :1431][INFO    ][11540] Starting a new job with PID 11540
2018-10-13 05:30:38,676 [salt.minion      :1708][INFO    ][11540] Returning information for job: 20181013053038602489
2018-10-13 05:31:38,626 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013053138614593
2018-10-13 05:31:38,653 [salt.minion      :1431][INFO    ][11546] Starting a new job with PID 11546
2018-10-13 05:31:39,667 [salt.state       :905 ][INFO    ][11546] Loading fresh modules for state activity
2018-10-13 05:31:40,682 [salt.state       :1770][INFO    ][11546] Running state [keepalived] at time 05:31:40.682919
2018-10-13 05:31:40,683 [salt.state       :1803][INFO    ][11546] Executing state pkg.installed for [keepalived]
2018-10-13 05:31:40,685 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11546] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:31:41,223 [salt.state       :290 ][INFO    ][11546] All specified packages are already installed
2018-10-13 05:31:41,224 [salt.state       :1941][INFO    ][11546] Completed state [keepalived] at time 05:31:41.224300 duration_in_ms=541.381
2018-10-13 05:31:41,225 [salt.state       :1770][INFO    ][11546] Running state [lsof] at time 05:31:41.224972
2018-10-13 05:31:41,225 [salt.state       :1803][INFO    ][11546] Executing state pkg.installed for [lsof]
2018-10-13 05:31:41,236 [salt.state       :290 ][INFO    ][11546] All specified packages are already installed
2018-10-13 05:31:41,236 [salt.state       :1941][INFO    ][11546] Completed state [lsof] at time 05:31:41.236808 duration_in_ms=11.836
2018-10-13 05:31:41,242 [salt.state       :1770][INFO    ][11546] Running state [/etc/keepalived/keepalived.conf] at time 05:31:41.242036
2018-10-13 05:31:41,242 [salt.state       :1803][INFO    ][11546] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-13 05:31:41,328 [salt.state       :290 ][INFO    ][11546] File /etc/keepalived/keepalived.conf is in the correct state
2018-10-13 05:31:41,328 [salt.state       :1941][INFO    ][11546] Completed state [/etc/keepalived/keepalived.conf] at time 05:31:41.328881 duration_in_ms=86.845
2018-10-13 05:31:41,330 [salt.state       :1770][INFO    ][11546] Running state [keepalived] at time 05:31:41.330429
2018-10-13 05:31:41,331 [salt.state       :1803][INFO    ][11546] Executing state service.running for [keepalived]
2018-10-13 05:31:41,331 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11546] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-13 05:31:41,385 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11546] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-13 05:31:41,412 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11546] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-13 05:31:41,438 [salt.state       :290 ][INFO    ][11546] The service keepalived is already running
2018-10-13 05:31:41,439 [salt.state       :1941][INFO    ][11546] Completed state [keepalived] at time 05:31:41.439506 duration_in_ms=109.076
2018-10-13 05:31:41,443 [salt.minion      :1708][INFO    ][11546] Returning information for job: 20181013053138614593
2018-10-13 05:31:47,910 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command pillar.get with jid 20181013053147897788
2018-10-13 05:31:47,945 [salt.minion      :1431][INFO    ][11572] Starting a new job with PID 11572
2018-10-13 05:31:47,957 [salt.minion      :1708][INFO    ][11572] Returning information for job: 20181013053147897788
2018-10-13 05:34:30,364 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013053430352246
2018-10-13 05:34:30,390 [salt.minion      :1431][INFO    ][11587] Starting a new job with PID 11587
2018-10-13 05:34:32,109 [salt.state       :905 ][INFO    ][11587] Loading fresh modules for state activity
2018-10-13 05:34:33,777 [salt.state       :1770][INFO    ][11587] Running state [memcached] at time 05:34:33.777092
2018-10-13 05:34:33,778 [salt.state       :1803][INFO    ][11587] Executing state pkg.installed for [memcached]
2018-10-13 05:34:33,781 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11587] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:34:34,335 [salt.state       :290 ][INFO    ][11587] All specified packages are already installed
2018-10-13 05:34:34,336 [salt.state       :1941][INFO    ][11587] Completed state [memcached] at time 05:34:34.335983 duration_in_ms=558.89
2018-10-13 05:34:34,336 [salt.state       :1770][INFO    ][11587] Running state [python-memcache] at time 05:34:34.336658
2018-10-13 05:34:34,337 [salt.state       :1803][INFO    ][11587] Executing state pkg.installed for [python-memcache]
2018-10-13 05:34:34,347 [salt.state       :290 ][INFO    ][11587] All specified packages are already installed
2018-10-13 05:34:34,347 [salt.state       :1941][INFO    ][11587] Completed state [python-memcache] at time 05:34:34.347839 duration_in_ms=11.18
2018-10-13 05:34:34,352 [salt.state       :1770][INFO    ][11587] Running state [/etc/memcached.conf] at time 05:34:34.352652
2018-10-13 05:34:34,353 [salt.state       :1803][INFO    ][11587] Executing state file.managed for [/etc/memcached.conf]
2018-10-13 05:34:34,403 [salt.state       :290 ][INFO    ][11587] File /etc/memcached.conf is in the correct state
2018-10-13 05:34:34,404 [salt.state       :1941][INFO    ][11587] Completed state [/etc/memcached.conf] at time 05:34:34.404121 duration_in_ms=51.469
2018-10-13 05:34:34,405 [salt.state       :1770][INFO    ][11587] Running state [memcached] at time 05:34:34.405353
2018-10-13 05:34:34,405 [salt.state       :1803][INFO    ][11587] Executing state service.running for [memcached]
2018-10-13 05:34:34,407 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11587] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-13 05:34:34,444 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11587] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-13 05:34:34,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11587] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-13 05:34:34,483 [salt.state       :290 ][INFO    ][11587] The service memcached is already running
2018-10-13 05:34:34,484 [salt.state       :1941][INFO    ][11587] Completed state [memcached] at time 05:34:34.484297 duration_in_ms=78.944
2018-10-13 05:34:34,486 [salt.minion      :1708][INFO    ][11587] Returning information for job: 20181013053430352246
2018-10-13 05:34:36,224 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013053436212994
2018-10-13 05:34:36,258 [salt.minion      :1431][INFO    ][11613] Starting a new job with PID 11613
2018-10-13 05:34:42,601 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013053442587114
2018-10-13 05:34:42,629 [salt.minion      :1431][INFO    ][11620] Starting a new job with PID 11620
2018-10-13 05:34:42,653 [salt.minion      :1708][INFO    ][11620] Returning information for job: 20181013053442587114
2018-10-13 05:34:43,849 [salt.state       :905 ][INFO    ][11613] Loading fresh modules for state activity
2018-10-13 05:34:45,785 [salt.state       :1770][INFO    ][11613] Running state [haproxy] at time 05:34:45.785891
2018-10-13 05:34:45,787 [salt.state       :1803][INFO    ][11613] Executing state pkg.installed for [haproxy]
2018-10-13 05:34:45,788 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11613] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:34:46,328 [salt.state       :290 ][INFO    ][11613] All specified packages are already installed
2018-10-13 05:34:46,329 [salt.state       :1941][INFO    ][11613] Completed state [haproxy] at time 05:34:46.329536 duration_in_ms=543.645
2018-10-13 05:34:46,335 [salt.state       :1770][INFO    ][11613] Running state [/etc/default/haproxy] at time 05:34:46.335526
2018-10-13 05:34:46,336 [salt.state       :1803][INFO    ][11613] Executing state file.managed for [/etc/default/haproxy]
2018-10-13 05:34:46,357 [salt.state       :290 ][INFO    ][11613] File /etc/default/haproxy is in the correct state
2018-10-13 05:34:46,358 [salt.state       :1941][INFO    ][11613] Completed state [/etc/default/haproxy] at time 05:34:46.358175 duration_in_ms=22.649
2018-10-13 05:34:46,359 [salt.state       :1770][INFO    ][11613] Running state [/etc/haproxy/haproxy.cfg] at time 05:34:46.358825
2018-10-13 05:34:46,359 [salt.state       :1803][INFO    ][11613] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-13 05:34:46,571 [salt.state       :290 ][INFO    ][11613] File /etc/haproxy/haproxy.cfg is in the correct state
2018-10-13 05:34:46,571 [salt.state       :1941][INFO    ][11613] Completed state [/etc/haproxy/haproxy.cfg] at time 05:34:46.571859 duration_in_ms=213.034
2018-10-13 05:34:46,572 [salt.state       :1770][INFO    ][11613] Running state [/etc/haproxy/ssl] at time 05:34:46.572505
2018-10-13 05:34:46,573 [salt.state       :1803][INFO    ][11613] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-13 05:34:46,574 [salt.state       :290 ][INFO    ][11613] Directory /etc/haproxy/ssl is in the correct state
Directory /etc/haproxy/ssl updated
2018-10-13 05:34:46,576 [salt.state       :1941][INFO    ][11613] Completed state [/etc/haproxy/ssl] at time 05:34:46.575935 duration_in_ms=3.429
2018-10-13 05:34:46,576 [salt.state       :1770][INFO    ][11613] Running state [/etc/haproxy/errors/429.http11] at time 05:34:46.576715
2018-10-13 05:34:46,577 [salt.state       :1803][INFO    ][11613] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-13 05:34:46,598 [salt.state       :290 ][INFO    ][11613] File /etc/haproxy/errors/429.http11 is in the correct state
2018-10-13 05:34:46,599 [salt.state       :1941][INFO    ][11613] Completed state [/etc/haproxy/errors/429.http11] at time 05:34:46.599218 duration_in_ms=22.502
2018-10-13 05:34:46,599 [salt.state       :1770][INFO    ][11613] Running state [haproxy_status_packages] at time 05:34:46.599478
2018-10-13 05:34:46,599 [salt.state       :1803][INFO    ][11613] Executing state pkg.installed for [haproxy_status_packages]
2018-10-13 05:34:46,610 [salt.state       :290 ][INFO    ][11613] All specified packages are already installed
2018-10-13 05:34:46,610 [salt.state       :1941][INFO    ][11613] Completed state [haproxy_status_packages] at time 05:34:46.610376 duration_in_ms=10.897
2018-10-13 05:34:46,611 [salt.state       :1770][INFO    ][11613] Running state [/usr/bin/haproxy-status.sh] at time 05:34:46.611292
2018-10-13 05:34:46,611 [salt.state       :1803][INFO    ][11613] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-13 05:34:46,657 [salt.state       :290 ][INFO    ][11613] File /usr/bin/haproxy-status.sh is in the correct state
2018-10-13 05:34:46,657 [salt.state       :1941][INFO    ][11613] Completed state [/usr/bin/haproxy-status.sh] at time 05:34:46.657430 duration_in_ms=46.138
2018-10-13 05:34:46,658 [salt.state       :1770][INFO    ][11613] Running state [net.ipv4.ip_nonlocal_bind] at time 05:34:46.658009
2018-10-13 05:34:46,658 [salt.state       :1803][INFO    ][11613] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-13 05:34:46,681 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11613] Executing command 'sysctl -n net.ipv4.ip_nonlocal_bind' in directory '/root'
2018-10-13 05:34:46,706 [salt.state       :290 ][INFO    ][11613] Sysctl value net.ipv4.ip_nonlocal_bind = 1 is already set
2018-10-13 05:34:46,707 [salt.state       :1941][INFO    ][11613] Completed state [net.ipv4.ip_nonlocal_bind] at time 05:34:46.707688 duration_in_ms=49.678
2018-10-13 05:34:46,712 [salt.state       :1770][INFO    ][11613] Running state [haproxy] at time 05:34:46.712155
2018-10-13 05:34:46,713 [salt.state       :1803][INFO    ][11613] Executing state service.running for [haproxy]
2018-10-13 05:34:46,715 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11613] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-13 05:34:46,741 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11613] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-13 05:34:46,767 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11613] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-13 05:34:46,790 [salt.state       :290 ][INFO    ][11613] The service haproxy is already running
2018-10-13 05:34:46,792 [salt.state       :1941][INFO    ][11613] Completed state [haproxy] at time 05:34:46.791951 duration_in_ms=79.796
2018-10-13 05:34:46,794 [salt.minion      :1708][INFO    ][11613] Returning information for job: 20181013053436212994
2018-10-13 05:34:49,117 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command service.status with jid 20181013053449102514
2018-10-13 05:34:49,144 [salt.minion      :1431][INFO    ][11649] Starting a new job with PID 11649
2018-10-13 05:34:49,732 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11649] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-13 05:34:49,756 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11649] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-13 05:34:49,777 [salt.minion      :1708][INFO    ][11649] Returning information for job: 20181013053449102514
2018-10-13 05:34:51,818 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command service.restart with jid 20181013053451800918
2018-10-13 05:34:51,854 [salt.minion      :1431][INFO    ][11657] Starting a new job with PID 11657
2018-10-13 05:34:52,465 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11657] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-13 05:34:52,506 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11657] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-13 05:34:52,553 [salt.minion      :1708][INFO    ][11657] Returning information for job: 20181013053451800918
2018-10-13 05:51:54,585 [salt.utils.schedule:1375][INFO    ][2926] Running scheduled job: __mine_interval
2018-10-13 05:59:22,949 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013055922933933
2018-10-13 05:59:22,978 [salt.minion      :1431][INFO    ][11783] Starting a new job with PID 11783
2018-10-13 05:59:23,988 [salt.state       :905 ][INFO    ][11783] Loading fresh modules for state activity
2018-10-13 05:59:24,068 [salt.fileclient  :1215][INFO    ][11783] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-10-13 05:59:24,116 [salt.fileclient  :1215][INFO    ][11783] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-10-13 05:59:24,148 [salt.fileclient  :1215][INFO    ][11783] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-10-13 05:59:24,197 [salt.fileclient  :1215][INFO    ][11783] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-10-13 05:59:25,183 [salt.state       :1770][INFO    ][11783] Running state [redis-server] at time 05:59:25.183823
2018-10-13 05:59:25,184 [salt.state       :1803][INFO    ][11783] Executing state pkg.installed for [redis-server]
2018-10-13 05:59:25,186 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:59:25,775 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-10-13 05:59:25,959 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-13 05:59:27,968 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013055927954579
2018-10-13 05:59:27,994 [salt.minion      :1431][INFO    ][12139] Starting a new job with PID 12139
2018-10-13 05:59:28,019 [salt.minion      :1708][INFO    ][12139] Returning information for job: 20181013055927954579
2018-10-13 05:59:31,265 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 05:59:31,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-10-13 05:59:36,238 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:59:36,294 [salt.state       :290 ][INFO    ][11783] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-10-13 05:59:36,323 [salt.state       :905 ][INFO    ][11783] Loading fresh modules for state activity
2018-10-13 05:59:36,379 [salt.state       :1941][INFO    ][11783] Completed state [redis-server] at time 05:59:36.379247 duration_in_ms=11195.425
2018-10-13 05:59:36,385 [salt.state       :1770][INFO    ][11783] Running state [vm.overcommit_memory] at time 05:59:36.385443
2018-10-13 05:59:36,386 [salt.state       :1803][INFO    ][11783] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-13 05:59:36,391 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-10-13 05:59:36,409 [salt.state       :290 ][INFO    ][11783] {'vm.overcommit_memory': 1}
2018-10-13 05:59:36,410 [salt.state       :1941][INFO    ][11783] Completed state [vm.overcommit_memory] at time 05:59:36.410658 duration_in_ms=25.215
2018-10-13 05:59:36,415 [salt.state       :1770][INFO    ][11783] Running state [/etc/redis/redis.conf] at time 05:59:36.415283
2018-10-13 05:59:36,416 [salt.state       :1803][INFO    ][11783] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-13 05:59:36,460 [salt.fileclient  :1215][INFO    ][11783] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-10-13 05:59:36,544 [salt.state       :290 ][INFO    ][11783] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.32
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -505,8 +505,7 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
-appendonly no
+appendonly yes
 
 # The name of the append only file (default: "appendonly.aof")
 
@@ -535,9 +534,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-10-13 05:59:36,552 [salt.state       :1941][INFO    ][11783] Completed state [/etc/redis/redis.conf] at time 05:59:36.552395 duration_in_ms=137.115
2018-10-13 05:59:37,169 [salt.state       :1770][INFO    ][11783] Running state [redis-server] at time 05:59:37.169280
2018-10-13 05:59:37,170 [salt.state       :1803][INFO    ][11783] Executing state service.running for [redis-server]
2018-10-13 05:59:37,172 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-13 05:59:37,208 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-13 05:59:37,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-13 05:59:37,262 [salt.state       :290 ][INFO    ][11783] The service redis-server is already running
2018-10-13 05:59:37,263 [salt.state       :1941][INFO    ][11783] Completed state [redis-server] at time 05:59:37.263050 duration_in_ms=93.77
2018-10-13 05:59:37,263 [salt.state       :1770][INFO    ][11783] Running state [redis-server] at time 05:59:37.263692
2018-10-13 05:59:37,264 [salt.state       :1803][INFO    ][11783] Executing state service.mod_watch for [redis-server]
2018-10-13 05:59:37,266 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-13 05:59:37,297 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-10-13 05:59:37,588 [salt.state       :290 ][INFO    ][11783] {'redis-server': True}
2018-10-13 05:59:37,590 [salt.state       :1941][INFO    ][11783] Completed state [redis-server] at time 05:59:37.590079 duration_in_ms=326.386
2018-10-13 05:59:37,593 [salt.state       :1770][INFO    ][11783] Running state [redis-sentinel] at time 05:59:37.593209
2018-10-13 05:59:37,593 [salt.state       :1803][INFO    ][11783] Executing state pkg.installed for [redis-sentinel]
2018-10-13 05:59:37,905 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 05:59:37,943 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-10-13 05:59:38,161 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013055938150987
2018-10-13 05:59:38,183 [salt.minion      :1431][INFO    ][12756] Starting a new job with PID 12756
2018-10-13 05:59:38,206 [salt.minion      :1708][INFO    ][12756] Returning information for job: 20181013055938150987
2018-10-13 05:59:41,991 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:59:42,048 [salt.state       :290 ][INFO    ][11783] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-10-13 05:59:42,079 [salt.state       :905 ][INFO    ][11783] Loading fresh modules for state activity
2018-10-13 05:59:42,136 [salt.state       :1941][INFO    ][11783] Completed state [redis-sentinel] at time 05:59:42.136233 duration_in_ms=4543.024
2018-10-13 05:59:42,773 [salt.state       :1770][INFO    ][11783] Running state [/etc/redis/sentinel.conf] at time 05:59:42.773120
2018-10-13 05:59:42,774 [salt.state       :1803][INFO    ][11783] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-13 05:59:42,798 [salt.fileclient  :1215][INFO    ][11783] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-10-13 05:59:42,846 [salt.state       :290 ][INFO    ][11783] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.32
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-10-13 05:59:42,853 [salt.state       :1941][INFO    ][11783] Completed state [/etc/redis/sentinel.conf] at time 05:59:42.853769 duration_in_ms=80.649
2018-10-13 05:59:42,854 [salt.state       :1770][INFO    ][11783] Running state [redis-sentinel] at time 05:59:42.854175
2018-10-13 05:59:42,854 [salt.state       :1803][INFO    ][11783] Executing state service.running for [redis-sentinel]
2018-10-13 05:59:42,855 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-13 05:59:42,880 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-13 05:59:42,904 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-13 05:59:42,927 [salt.state       :290 ][INFO    ][11783] The service redis-sentinel is already running
2018-10-13 05:59:42,928 [salt.state       :1941][INFO    ][11783] Completed state [redis-sentinel] at time 05:59:42.928060 duration_in_ms=73.885
2018-10-13 05:59:42,928 [salt.state       :1770][INFO    ][11783] Running state [redis-sentinel] at time 05:59:42.928401
2018-10-13 05:59:42,928 [salt.state       :1803][INFO    ][11783] Executing state service.mod_watch for [redis-sentinel]
2018-10-13 05:59:42,932 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-13 05:59:42,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11783] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-10-13 05:59:43,269 [salt.state       :290 ][INFO    ][11783] {'redis-sentinel': True}
2018-10-13 05:59:43,271 [salt.state       :1941][INFO    ][11783] Completed state [redis-sentinel] at time 05:59:43.271036 duration_in_ms=342.634
2018-10-13 05:59:43,274 [salt.minion      :1708][INFO    ][11783] Returning information for job: 20181013055922933933
2018-10-13 05:59:43,980 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013055943967281
2018-10-13 05:59:44,002 [salt.minion      :1431][INFO    ][13106] Starting a new job with PID 13106
2018-10-13 05:59:49,074 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013055949060152
2018-10-13 05:59:49,104 [salt.minion      :1431][INFO    ][13111] Starting a new job with PID 13111
2018-10-13 05:59:49,134 [salt.minion      :1708][INFO    ][13111] Returning information for job: 20181013055949060152
2018-10-13 05:59:50,476 [salt.state       :905 ][INFO    ][13106] Loading fresh modules for state activity
2018-10-13 05:59:52,148 [salt.state       :1770][INFO    ][13106] Running state [redis-server] at time 05:59:52.148604
2018-10-13 05:59:52,149 [salt.state       :1803][INFO    ][13106] Executing state pkg.installed for [redis-server]
2018-10-13 05:59:52,150 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13106] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 05:59:52,727 [salt.state       :290 ][INFO    ][13106] All specified packages are already installed
2018-10-13 05:59:52,728 [salt.state       :1941][INFO    ][13106] Completed state [redis-server] at time 05:59:52.728174 duration_in_ms=579.57
2018-10-13 05:59:52,730 [salt.state       :1770][INFO    ][13106] Running state [vm.overcommit_memory] at time 05:59:52.730426
2018-10-13 05:59:52,731 [salt.state       :1803][INFO    ][13106] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-13 05:59:52,754 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13106] Executing command 'sysctl -n vm.overcommit_memory' in directory '/root'
2018-10-13 05:59:52,771 [salt.state       :290 ][INFO    ][13106] Sysctl value vm.overcommit_memory = 1 is already set
2018-10-13 05:59:52,772 [salt.state       :1941][INFO    ][13106] Completed state [vm.overcommit_memory] at time 05:59:52.772185 duration_in_ms=41.759
2018-10-13 05:59:52,781 [salt.state       :1770][INFO    ][13106] Running state [/etc/redis/redis.conf] at time 05:59:52.780651
2018-10-13 05:59:52,781 [salt.state       :1803][INFO    ][13106] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-13 05:59:52,883 [salt.state       :290 ][INFO    ][13106] File /etc/redis/redis.conf is in the correct state
2018-10-13 05:59:52,883 [salt.state       :1941][INFO    ][13106] Completed state [/etc/redis/redis.conf] at time 05:59:52.883909 duration_in_ms=103.259
2018-10-13 05:59:52,884 [salt.state       :1770][INFO    ][13106] Running state [redis-server] at time 05:59:52.884928
2018-10-13 05:59:52,885 [salt.state       :1803][INFO    ][13106] Executing state service.running for [redis-server]
2018-10-13 05:59:52,885 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13106] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-13 05:59:52,912 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13106] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-13 05:59:52,936 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13106] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-13 05:59:52,961 [salt.state       :290 ][INFO    ][13106] The service redis-server is already running
2018-10-13 05:59:52,962 [salt.state       :1941][INFO    ][13106] Completed state [redis-server] at time 05:59:52.962750 duration_in_ms=77.821
2018-10-13 05:59:52,964 [salt.state       :1770][INFO    ][13106] Running state [redis-sentinel] at time 05:59:52.964462
2018-10-13 05:59:52,966 [salt.state       :1803][INFO    ][13106] Executing state pkg.installed for [redis-sentinel]
2018-10-13 05:59:52,983 [salt.state       :290 ][INFO    ][13106] All specified packages are already installed
2018-10-13 05:59:52,983 [salt.state       :1941][INFO    ][13106] Completed state [redis-sentinel] at time 05:59:52.983822 duration_in_ms=19.359
2018-10-13 05:59:52,985 [salt.state       :1770][INFO    ][13106] Running state [/etc/redis/sentinel.conf] at time 05:59:52.985324
2018-10-13 05:59:52,986 [salt.state       :1803][INFO    ][13106] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-13 05:59:53,055 [salt.state       :290 ][INFO    ][13106] File /etc/redis/sentinel.conf is in the correct state
2018-10-13 05:59:53,056 [salt.state       :1941][INFO    ][13106] Completed state [/etc/redis/sentinel.conf] at time 05:59:53.055953 duration_in_ms=70.629
2018-10-13 05:59:53,056 [salt.state       :1770][INFO    ][13106] Running state [redis-sentinel] at time 05:59:53.056327
2018-10-13 05:59:53,056 [salt.state       :1803][INFO    ][13106] Executing state service.running for [redis-sentinel]
2018-10-13 05:59:53,058 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13106] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-13 05:59:53,090 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13106] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-13 05:59:53,116 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13106] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-13 05:59:53,135 [salt.state       :290 ][INFO    ][13106] The service redis-sentinel is already running
2018-10-13 05:59:53,137 [salt.state       :1941][INFO    ][13106] Completed state [redis-sentinel] at time 05:59:53.137479 duration_in_ms=81.152
2018-10-13 05:59:53,140 [salt.minion      :1708][INFO    ][13106] Returning information for job: 20181013055943967281
2018-10-13 06:00:10,403 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command test.ping with jid 20181013060010391311
2018-10-13 06:00:10,431 [salt.minion      :1431][INFO    ][13147] Starting a new job with PID 13147
2018-10-13 06:00:10,460 [salt.minion      :1708][INFO    ][13147] Returning information for job: 20181013060010391311
2018-10-13 06:01:42,408 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013060142394092
2018-10-13 06:01:42,436 [salt.minion      :1431][INFO    ][13152] Starting a new job with PID 13152
2018-10-13 06:01:47,535 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060147516814
2018-10-13 06:01:47,559 [salt.minion      :1431][INFO    ][13157] Starting a new job with PID 13157
2018-10-13 06:01:47,586 [salt.minion      :1708][INFO    ][13157] Returning information for job: 20181013060147516814
2018-10-13 06:01:48,629 [salt.state       :905 ][INFO    ][13152] Loading fresh modules for state activity
2018-10-13 06:01:48,708 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-10-13 06:01:48,753 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-10-13 06:01:48,861 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-10-13 06:01:48,897 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-10-13 06:01:48,939 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-10-13 06:01:49,052 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-10-13 06:01:49,160 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-10-13 06:01:49,281 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-10-13 06:01:49,469 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-10-13 06:01:49,565 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-10-13 06:01:49,646 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-10-13 06:01:49,713 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-10-13 06:01:50,704 [salt.state       :1770][INFO    ][13152] Running state [apache2] at time 06:01:50.704854
2018-10-13 06:01:50,705 [salt.state       :1803][INFO    ][13152] Executing state pkg.installed for [apache2]
2018-10-13 06:01:50,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:01:51,276 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-10-13 06:01:51,461 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-13 06:01:53,984 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:01:54,025 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-10-13 06:01:57,639 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060157627679
2018-10-13 06:01:57,660 [salt.minion      :1431][INFO    ][14170] Starting a new job with PID 14170
2018-10-13 06:01:57,685 [salt.minion      :1708][INFO    ][14170] Returning information for job: 20181013060157627679
2018-10-13 06:02:03,277 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:02:03,333 [salt.state       :290 ][INFO    ][13152] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-10-13 06:02:03,364 [salt.state       :905 ][INFO    ][13152] Loading fresh modules for state activity
2018-10-13 06:02:03,413 [salt.state       :1941][INFO    ][13152] Completed state [apache2] at time 06:02:03.413261 duration_in_ms=12708.406
2018-10-13 06:02:03,420 [salt.state       :1770][INFO    ][13152] Running state [openssl] at time 06:02:03.420855
2018-10-13 06:02:03,421 [salt.state       :1803][INFO    ][13152] Executing state pkg.installed for [openssl]
2018-10-13 06:02:04,415 [salt.state       :290 ][INFO    ][13152] All specified packages are already installed
2018-10-13 06:02:04,416 [salt.state       :1941][INFO    ][13152] Completed state [openssl] at time 06:02:04.416341 duration_in_ms=995.486
2018-10-13 06:02:04,418 [salt.state       :1770][INFO    ][13152] Running state [a2enmod rewrite] at time 06:02:04.418392
2018-10-13 06:02:04,419 [salt.state       :1803][INFO    ][13152] Executing state cmd.run for [a2enmod rewrite]
2018-10-13 06:02:04,420 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command 'a2enmod rewrite' in directory '/root'
2018-10-13 06:02:04,502 [salt.state       :290 ][INFO    ][13152] {'pid': 14677, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-13 06:02:04,504 [salt.state       :1941][INFO    ][13152] Completed state [a2enmod rewrite] at time 06:02:04.504233 duration_in_ms=85.841
2018-10-13 06:02:04,507 [salt.state       :1770][INFO    ][13152] Running state [libapache2-mod-wsgi] at time 06:02:04.506615
2018-10-13 06:02:04,508 [salt.state       :1803][INFO    ][13152] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-13 06:02:04,552 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:02:04,595 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-10-13 06:02:07,805 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060207792523
2018-10-13 06:02:07,832 [salt.minion      :1431][INFO    ][14941] Starting a new job with PID 14941
2018-10-13 06:02:07,855 [salt.minion      :1708][INFO    ][14941] Returning information for job: 20181013060207792523
2018-10-13 06:02:09,993 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:02:10,057 [salt.state       :290 ][INFO    ][13152] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-10-13 06:02:10,086 [salt.state       :905 ][INFO    ][13152] Loading fresh modules for state activity
2018-10-13 06:02:10,143 [salt.state       :1941][INFO    ][13152] Completed state [libapache2-mod-wsgi] at time 06:02:10.143276 duration_in_ms=5636.66
2018-10-13 06:02:10,147 [salt.state       :1770][INFO    ][13152] Running state [a2enmod wsgi] at time 06:02:10.147699
2018-10-13 06:02:10,148 [salt.state       :1803][INFO    ][13152] Executing state cmd.run for [a2enmod wsgi]
2018-10-13 06:02:10,149 [salt.state       :290 ][INFO    ][13152] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-13 06:02:10,149 [salt.state       :1941][INFO    ][13152] Completed state [a2enmod wsgi] at time 06:02:10.149435 duration_in_ms=1.736
2018-10-13 06:02:10,155 [salt.state       :1770][INFO    ][13152] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 06:02:10.155216
2018-10-13 06:02:10,156 [salt.state       :1803][INFO    ][13152] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-13 06:02:10,193 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-10-13 06:02:10,284 [salt.state       :290 ][INFO    ][13152] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-10-13 06:02:10,289 [salt.state       :1941][INFO    ][13152] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 06:02:10.289017 duration_in_ms=133.8
2018-10-13 06:02:10,289 [salt.state       :1770][INFO    ][13152] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:02:10.289551
2018-10-13 06:02:10,290 [salt.state       :1803][INFO    ][13152] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-13 06:02:10,291 [salt.state       :290 ][INFO    ][13152] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-13 06:02:10,291 [salt.state       :1941][INFO    ][13152] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:02:10.291516 duration_in_ms=1.965
2018-10-13 06:02:10,292 [salt.state       :1770][INFO    ][13152] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 06:02:10.292008
2018-10-13 06:02:10,292 [salt.state       :1803][INFO    ][13152] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-13 06:02:10,293 [salt.state       :290 ][INFO    ][13152] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-10-13 06:02:10,293 [salt.state       :1941][INFO    ][13152] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 06:02:10.293549 duration_in_ms=1.541
2018-10-13 06:02:10,296 [salt.state       :1770][INFO    ][13152] Running state [a2enmod mpm_prefork] at time 06:02:10.296194
2018-10-13 06:02:10,297 [salt.state       :1803][INFO    ][13152] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-13 06:02:10,300 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-10-13 06:02:10,371 [salt.state       :290 ][INFO    ][13152] {'pid': 15010, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-13 06:02:10,372 [salt.state       :1941][INFO    ][13152] Completed state [a2enmod mpm_prefork] at time 06:02:10.371983 duration_in_ms=75.788
2018-10-13 06:02:10,373 [salt.state       :1770][INFO    ][13152] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:02:10.373098
2018-10-13 06:02:10,374 [salt.state       :1803][INFO    ][13152] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-13 06:02:10,375 [salt.state       :290 ][INFO    ][13152] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-13 06:02:10,375 [salt.state       :1941][INFO    ][13152] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:02:10.375842 duration_in_ms=2.744
2018-10-13 06:02:10,376 [salt.state       :1770][INFO    ][13152] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 06:02:10.376371
2018-10-13 06:02:10,376 [salt.state       :1803][INFO    ][13152] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-13 06:02:10,377 [salt.state       :290 ][INFO    ][13152] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-10-13 06:02:10,378 [salt.state       :1941][INFO    ][13152] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 06:02:10.377987 duration_in_ms=1.616
2018-10-13 06:02:10,381 [salt.state       :1770][INFO    ][13152] Running state [apache_server_service_task] at time 06:02:10.380967
2018-10-13 06:02:10,381 [salt.state       :1803][INFO    ][13152] Executing state test.show_notification for [apache_server_service_task]
2018-10-13 06:02:10,382 [salt.state       :290 ][INFO    ][13152] Running apache.server.service
2018-10-13 06:02:10,383 [salt.state       :1941][INFO    ][13152] Completed state [apache_server_service_task] at time 06:02:10.382488 duration_in_ms=1.521
2018-10-13 06:02:10,384 [salt.state       :1770][INFO    ][13152] Running state [/etc/apache2/ports.conf] at time 06:02:10.384105
2018-10-13 06:02:10,384 [salt.state       :1803][INFO    ][13152] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-13 06:02:10,408 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-10-13 06:02:10,474 [salt.state       :290 ][INFO    ][13152] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-10-13 06:02:10,478 [salt.state       :1941][INFO    ][13152] Completed state [/etc/apache2/ports.conf] at time 06:02:10.478838 duration_in_ms=94.733
2018-10-13 06:02:10,479 [salt.state       :1770][INFO    ][13152] Running state [/etc/apache2/conf-available/security.conf] at time 06:02:10.479932
2018-10-13 06:02:10,480 [salt.state       :1803][INFO    ][13152] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-13 06:02:10,499 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-10-13 06:02:10,572 [salt.state       :290 ][INFO    ][13152] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-10-13 06:02:10,579 [salt.state       :1941][INFO    ][13152] Completed state [/etc/apache2/conf-available/security.conf] at time 06:02:10.579358 duration_in_ms=99.425
2018-10-13 06:02:11,304 [salt.state       :1770][INFO    ][13152] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 06:02:11.304278
2018-10-13 06:02:11,305 [salt.state       :1803][INFO    ][13152] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-13 06:02:11,306 [salt.state       :290 ][INFO    ][13152] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-10-13 06:02:11,306 [salt.state       :1941][INFO    ][13152] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 06:02:11.306512 duration_in_ms=2.234
2018-10-13 06:02:11,307 [salt.state       :1770][INFO    ][13152] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:02:11.307678
2018-10-13 06:02:11,308 [salt.state       :1803][INFO    ][13152] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-13 06:02:11,332 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-10-13 06:02:11,369 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-10-13 06:02:11,450 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-10-13 06:02:11,480 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-10-13 06:02:11,594 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-10-13 06:02:11,621 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-10-13 06:02:11,658 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-10-13 06:02:11,680 [salt.state       :290 ][INFO    ][13152] File changed:
New file
2018-10-13 06:02:11,681 [salt.state       :1941][INFO    ][13152] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:02:11.681153 duration_in_ms=373.474
2018-10-13 06:02:11,682 [salt.state       :1770][INFO    ][13152] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:02:11.682677
2018-10-13 06:02:11,683 [salt.state       :1803][INFO    ][13152] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-13 06:02:11,991 [salt.state       :290 ][INFO    ][13152] File changed:
New file
2018-10-13 06:02:11,992 [salt.state       :1941][INFO    ][13152] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:02:11.992676 duration_in_ms=309.998
2018-10-13 06:02:11,996 [salt.state       :1770][INFO    ][13152] Running state [apache2] at time 06:02:11.996628
2018-10-13 06:02:11,997 [salt.state       :1803][INFO    ][13152] Executing state service.running for [apache2]
2018-10-13 06:02:11,998 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-13 06:02:12,033 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-13 06:02:12,061 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-13 06:02:12,087 [salt.state       :290 ][INFO    ][13152] The service apache2 is already running
2018-10-13 06:02:12,089 [salt.state       :1941][INFO    ][13152] Completed state [apache2] at time 06:02:12.089000 duration_in_ms=92.371
2018-10-13 06:02:12,090 [salt.state       :1770][INFO    ][13152] Running state [apache2] at time 06:02:12.090661
2018-10-13 06:02:12,093 [salt.state       :1803][INFO    ][13152] Executing state service.mod_watch for [apache2]
2018-10-13 06:02:12,094 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-13 06:02:12,120 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-10-13 06:02:12,365 [salt.state       :290 ][INFO    ][13152] {'apache2': True}
2018-10-13 06:02:12,366 [salt.state       :1941][INFO    ][13152] Completed state [apache2] at time 06:02:12.365907 duration_in_ms=275.245
2018-10-13 06:02:12,369 [salt.state       :1770][INFO    ][13152] Running state [/etc/apache2/conf-enabled/security.conf] at time 06:02:12.369879
2018-10-13 06:02:12,370 [salt.state       :1803][INFO    ][13152] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-13 06:02:12,380 [salt.state       :290 ][INFO    ][13152] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-10-13 06:02:12,380 [salt.state       :1941][INFO    ][13152] Completed state [/etc/apache2/conf-enabled/security.conf] at time 06:02:12.380648 duration_in_ms=10.769
2018-10-13 06:02:12,383 [salt.state       :1770][INFO    ][13152] Running state [gnocchi-common] at time 06:02:12.383730
2018-10-13 06:02:12,384 [salt.state       :1803][INFO    ][13152] Executing state pkg.installed for [gnocchi-common]
2018-10-13 06:02:12,760 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:02:12,803 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-10-13 06:02:17,976 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060217956558
2018-10-13 06:02:17,999 [salt.minion      :1431][INFO    ][15434] Starting a new job with PID 15434
2018-10-13 06:02:18,080 [salt.minion      :1708][INFO    ][15434] Returning information for job: 20181013060217956558
2018-10-13 06:02:27,997 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060227979739
2018-10-13 06:02:28,014 [salt.minion      :1431][INFO    ][16464] Starting a new job with PID 16464
2018-10-13 06:02:28,092 [salt.minion      :1708][INFO    ][16464] Returning information for job: 20181013060227979739
2018-10-13 06:02:38,197 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060238185736
2018-10-13 06:02:38,216 [salt.minion      :1431][INFO    ][17455] Starting a new job with PID 17455
2018-10-13 06:02:38,299 [salt.minion      :1708][INFO    ][17455] Returning information for job: 20181013060238185736
2018-10-13 06:02:48,215 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060248200709
2018-10-13 06:02:48,235 [salt.minion      :1431][INFO    ][17907] Starting a new job with PID 17907
2018-10-13 06:02:48,329 [salt.minion      :1708][INFO    ][17907] Returning information for job: 20181013060248200709
2018-10-13 06:02:55,655 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:02:55,720 [salt.state       :290 ][INFO    ][13152] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp4'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.3-1.0~u16.04+mcp16'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp5'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp9'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-10-13 06:02:55,746 [salt.state       :905 ][INFO    ][13152] Loading fresh modules for state activity
2018-10-13 06:02:55,798 [salt.state       :1941][INFO    ][13152] Completed state [gnocchi-common] at time 06:02:55.798005 duration_in_ms=43414.275
2018-10-13 06:02:55,802 [salt.state       :1770][INFO    ][13152] Running state [gnocchi_ssl_mysql] at time 06:02:55.802346
2018-10-13 06:02:55,802 [salt.state       :1803][INFO    ][13152] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-10-13 06:02:55,803 [salt.state       :290 ][INFO    ][13152] Running gnocchi._ssl.mysql
2018-10-13 06:02:55,803 [salt.state       :1941][INFO    ][13152] Completed state [gnocchi_ssl_mysql] at time 06:02:55.803254 duration_in_ms=0.908
2018-10-13 06:02:55,805 [salt.state       :1770][INFO    ][13152] Running state [/etc/gnocchi/gnocchi.conf] at time 06:02:55.805375
2018-10-13 06:02:55,805 [salt.state       :1803][INFO    ][13152] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-10-13 06:02:55,839 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-10-13 06:02:55,965 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-10-13 06:02:55,983 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-10-13 06:02:56,012 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-10-13 06:02:56,063 [salt.fileclient  :1215][INFO    ][13152] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-10-13 06:02:56,076 [salt.state       :290 ][INFO    ][13152] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -515,153 +316,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +480,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.32:6379

2018-10-13 06:02:56,077 [salt.state       :1941][INFO    ][13152] Completed state [/etc/gnocchi/gnocchi.conf] at time 06:02:56.077361 duration_in_ms=271.985
2018-10-13 06:02:56,083 [salt.state       :1770][INFO    ][13152] Running state [gnocchi-api] at time 06:02:56.082369
2018-10-13 06:02:56,084 [salt.state       :1803][INFO    ][13152] Executing state pkg.installed for [gnocchi-api]
2018-10-13 06:02:57,914 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:02:57,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-10-13 06:02:58,250 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060258231417
2018-10-13 06:02:58,276 [salt.minion      :1431][INFO    ][18262] Starting a new job with PID 18262
2018-10-13 06:02:58,305 [salt.minion      :1708][INFO    ][18262] Returning information for job: 20181013060258231417
2018-10-13 06:03:08,177 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:03:08,244 [salt.state       :290 ][INFO    ][13152] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp13'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-10-13 06:03:08,282 [salt.state       :905 ][INFO    ][13152] Loading fresh modules for state activity
2018-10-13 06:03:08,343 [salt.state       :1941][INFO    ][13152] Completed state [gnocchi-api] at time 06:03:08.343220 duration_in_ms=12260.85
2018-10-13 06:03:08,352 [salt.state       :1770][INFO    ][13152] Running state [gnocchi-metricd] at time 06:03:08.352404
2018-10-13 06:03:08,354 [salt.state       :1803][INFO    ][13152] Executing state pkg.installed for [gnocchi-metricd]
2018-10-13 06:03:09,111 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060308381853
2018-10-13 06:03:09,136 [salt.minion      :1431][INFO    ][19150] Starting a new job with PID 19150
2018-10-13 06:03:09,162 [salt.minion      :1708][INFO    ][19150] Returning information for job: 20181013060308381853
2018-10-13 06:03:09,841 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:03:09,885 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-10-13 06:03:13,544 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:03:13,624 [salt.state       :290 ][INFO    ][13152] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-10-13 06:03:13,665 [salt.state       :905 ][INFO    ][13152] Loading fresh modules for state activity
2018-10-13 06:03:13,936 [salt.state       :1941][INFO    ][13152] Completed state [gnocchi-metricd] at time 06:03:13.936392 duration_in_ms=5583.987
2018-10-13 06:03:13,945 [salt.state       :1770][INFO    ][13152] Running state [python-memcache] at time 06:03:13.945430
2018-10-13 06:03:13,945 [salt.state       :1803][INFO    ][13152] Executing state pkg.installed for [python-memcache]
2018-10-13 06:03:14,957 [salt.state       :290 ][INFO    ][13152] All specified packages are already installed
2018-10-13 06:03:14,957 [salt.state       :1941][INFO    ][13152] Completed state [python-memcache] at time 06:03:14.957841 duration_in_ms=1012.411
2018-10-13 06:03:14,961 [salt.state       :1770][INFO    ][13152] Running state [gnocchi-upgrade] at time 06:03:14.961324
2018-10-13 06:03:14,961 [salt.state       :1803][INFO    ][13152] Executing state cmd.run for [gnocchi-upgrade]
2018-10-13 06:03:14,962 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-10-13 06:03:17,520 [salt.state       :290 ][INFO    ][13152] {'pid': 19400, 'retcode': 0, 'stderr': '2018-10-13 06:03:16,725 [19402] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-10-13 06:03:17,220 [19402] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2018-10-13 06:03:17,436 [19402] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.32,port=6379,db=0>>>\n2018-10-13 06:03:17,437 [19402] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-10-13 06:03:17,521 [salt.state       :1941][INFO    ][13152] Completed state [gnocchi-upgrade] at time 06:03:17.521435 duration_in_ms=2560.11
2018-10-13 06:03:17,524 [salt.state       :1770][INFO    ][13152] Running state [wsgi_gnocchi] at time 06:03:17.524795
2018-10-13 06:03:17,525 [salt.state       :1803][INFO    ][13152] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-10-13 06:03:17,526 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-10-13 06:03:17,601 [salt.state       :290 ][INFO    ][13152] {'new': 'wsgi_gnocchi', 'old': None}
2018-10-13 06:03:17,602 [salt.state       :1941][INFO    ][13152] Completed state [wsgi_gnocchi] at time 06:03:17.602748 duration_in_ms=77.952
2018-10-13 06:03:17,608 [salt.state       :1770][INFO    ][13152] Running state [apache2] at time 06:03:17.608404
2018-10-13 06:03:17,609 [salt.state       :1803][INFO    ][13152] Executing state service.running for [apache2]
2018-10-13 06:03:17,611 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-13 06:03:17,636 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-13 06:03:17,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-10-13 06:03:18,440 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060318422673
2018-10-13 06:03:18,469 [salt.minion      :1431][INFO    ][19495] Starting a new job with PID 19495
2018-10-13 06:03:18,497 [salt.minion      :1708][INFO    ][19495] Returning information for job: 20181013060318422673
2018-10-13 06:03:18,914 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-13 06:03:18,935 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-13 06:03:18,970 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-13 06:03:18,993 [salt.state       :290 ][INFO    ][13152] {'apache2': True}
2018-10-13 06:03:18,994 [salt.state       :1941][INFO    ][13152] Completed state [apache2] at time 06:03:18.994260 duration_in_ms=1385.856
2018-10-13 06:03:18,996 [salt.state       :1770][INFO    ][13152] Running state [gnocchi-metricd] at time 06:03:18.996211
2018-10-13 06:03:18,996 [salt.state       :1803][INFO    ][13152] Executing state service.running for [gnocchi-metricd]
2018-10-13 06:03:18,999 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-10-13 06:03:19,025 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-13 06:03:19,052 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-13 06:03:19,079 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-10-13 06:03:19,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-13 06:03:19,187 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-13 06:03:19,230 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-13 06:03:19,294 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-10-13 06:03:20,212 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13152] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-13 06:03:20,251 [salt.state       :290 ][INFO    ][13152] {'gnocchi-metricd': True}
2018-10-13 06:03:20,255 [salt.state       :1941][INFO    ][13152] Completed state [gnocchi-metricd] at time 06:03:20.255050 duration_in_ms=1258.838
2018-10-13 06:03:20,260 [salt.minion      :1708][INFO    ][13152] Returning information for job: 20181013060142394092
2018-10-13 06:05:03,574 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command test.ping with jid 20181013060503562946
2018-10-13 06:05:03,602 [salt.minion      :1431][INFO    ][19706] Starting a new job with PID 19706
2018-10-13 06:05:03,634 [salt.minion      :1708][INFO    ][19706] Returning information for job: 20181013060503562946
2018-10-13 06:05:26,507 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013060526489092
2018-10-13 06:05:26,535 [salt.minion      :1431][INFO    ][19712] Starting a new job with PID 19712
2018-10-13 06:05:31,628 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060531614451
2018-10-13 06:05:31,659 [salt.minion      :1431][INFO    ][19717] Starting a new job with PID 19717
2018-10-13 06:05:31,683 [salt.minion      :1708][INFO    ][19717] Returning information for job: 20181013060531614451
2018-10-13 06:05:32,642 [salt.state       :905 ][INFO    ][19712] Loading fresh modules for state activity
2018-10-13 06:05:32,729 [salt.fileclient  :1215][INFO    ][19712] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-10-13 06:05:32,769 [salt.fileclient  :1215][INFO    ][19712] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-10-13 06:05:33,625 [salt.fileclient  :1215][INFO    ][19712] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-10-13 06:05:35,884 [salt.state       :1770][INFO    ][19712] Running state [apache2] at time 06:05:35.884124
2018-10-13 06:05:35,884 [salt.state       :1803][INFO    ][19712] Executing state pkg.installed for [apache2]
2018-10-13 06:05:35,885 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:05:36,419 [salt.state       :290 ][INFO    ][19712] All specified packages are already installed
2018-10-13 06:05:36,420 [salt.state       :1941][INFO    ][19712] Completed state [apache2] at time 06:05:36.420243 duration_in_ms=536.119
2018-10-13 06:05:36,420 [salt.state       :1770][INFO    ][19712] Running state [openssl] at time 06:05:36.420648
2018-10-13 06:05:36,421 [salt.state       :1803][INFO    ][19712] Executing state pkg.installed for [openssl]
2018-10-13 06:05:36,434 [salt.state       :290 ][INFO    ][19712] All specified packages are already installed
2018-10-13 06:05:36,435 [salt.state       :1941][INFO    ][19712] Completed state [openssl] at time 06:05:36.434953 duration_in_ms=14.305
2018-10-13 06:05:36,435 [salt.state       :1770][INFO    ][19712] Running state [a2enmod rewrite] at time 06:05:36.435593
2018-10-13 06:05:36,435 [salt.state       :1803][INFO    ][19712] Executing state cmd.run for [a2enmod rewrite]
2018-10-13 06:05:36,436 [salt.state       :290 ][INFO    ][19712] /etc/apache2/mods-enabled/rewrite.load exists
2018-10-13 06:05:36,436 [salt.state       :1941][INFO    ][19712] Completed state [a2enmod rewrite] at time 06:05:36.436475 duration_in_ms=0.882
2018-10-13 06:05:36,438 [salt.state       :1770][INFO    ][19712] Running state [libapache2-mod-wsgi] at time 06:05:36.438466
2018-10-13 06:05:36,438 [salt.state       :1803][INFO    ][19712] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-13 06:05:36,450 [salt.state       :290 ][INFO    ][19712] All specified packages are already installed
2018-10-13 06:05:36,450 [salt.state       :1941][INFO    ][19712] Completed state [libapache2-mod-wsgi] at time 06:05:36.450444 duration_in_ms=11.978
2018-10-13 06:05:36,450 [salt.state       :1770][INFO    ][19712] Running state [a2enmod wsgi] at time 06:05:36.450909
2018-10-13 06:05:36,451 [salt.state       :1803][INFO    ][19712] Executing state cmd.run for [a2enmod wsgi]
2018-10-13 06:05:36,451 [salt.state       :290 ][INFO    ][19712] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-13 06:05:36,451 [salt.state       :1941][INFO    ][19712] Completed state [a2enmod wsgi] at time 06:05:36.451729 duration_in_ms=0.821
2018-10-13 06:05:36,458 [salt.state       :1770][INFO    ][19712] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 06:05:36.458913
2018-10-13 06:05:36,459 [salt.state       :1803][INFO    ][19712] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-13 06:05:36,774 [salt.state       :290 ][INFO    ][19712] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-10-13 06:05:36,775 [salt.state       :1941][INFO    ][19712] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 06:05:36.775061 duration_in_ms=316.147
2018-10-13 06:05:36,775 [salt.state       :1770][INFO    ][19712] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:05:36.775569
2018-10-13 06:05:36,776 [salt.state       :1803][INFO    ][19712] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-13 06:05:36,776 [salt.state       :290 ][INFO    ][19712] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-13 06:05:36,777 [salt.state       :1941][INFO    ][19712] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:05:36.777085 duration_in_ms=1.516
2018-10-13 06:05:36,778 [salt.state       :1770][INFO    ][19712] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 06:05:36.777545
2018-10-13 06:05:36,778 [salt.state       :1803][INFO    ][19712] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-13 06:05:36,779 [salt.state       :290 ][INFO    ][19712] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-10-13 06:05:36,779 [salt.state       :1941][INFO    ][19712] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 06:05:36.779605 duration_in_ms=2.06
2018-10-13 06:05:36,780 [salt.state       :1770][INFO    ][19712] Running state [a2enmod mpm_prefork] at time 06:05:36.780584
2018-10-13 06:05:36,781 [salt.state       :1803][INFO    ][19712] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-13 06:05:36,781 [salt.state       :290 ][INFO    ][19712] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-10-13 06:05:36,782 [salt.state       :1941][INFO    ][19712] Completed state [a2enmod mpm_prefork] at time 06:05:36.782074 duration_in_ms=1.49
2018-10-13 06:05:36,782 [salt.state       :1770][INFO    ][19712] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:05:36.782535
2018-10-13 06:05:36,783 [salt.state       :1803][INFO    ][19712] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-13 06:05:36,784 [salt.state       :290 ][INFO    ][19712] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-13 06:05:36,784 [salt.state       :1941][INFO    ][19712] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:05:36.784305 duration_in_ms=1.77
2018-10-13 06:05:36,784 [salt.state       :1770][INFO    ][19712] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 06:05:36.784559
2018-10-13 06:05:36,784 [salt.state       :1803][INFO    ][19712] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-13 06:05:36,785 [salt.state       :290 ][INFO    ][19712] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-10-13 06:05:36,785 [salt.state       :1941][INFO    ][19712] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 06:05:36.785334 duration_in_ms=0.775
2018-10-13 06:05:36,786 [salt.state       :1770][INFO    ][19712] Running state [apache_server_service_task] at time 06:05:36.786833
2018-10-13 06:05:36,787 [salt.state       :1803][INFO    ][19712] Executing state test.show_notification for [apache_server_service_task]
2018-10-13 06:05:36,787 [salt.state       :290 ][INFO    ][19712] Running apache.server.service
2018-10-13 06:05:36,787 [salt.state       :1941][INFO    ][19712] Completed state [apache_server_service_task] at time 06:05:36.787585 duration_in_ms=0.752
2018-10-13 06:05:36,788 [salt.state       :1770][INFO    ][19712] Running state [/etc/apache2/ports.conf] at time 06:05:36.788030
2018-10-13 06:05:36,788 [salt.state       :1803][INFO    ][19712] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-13 06:05:36,875 [salt.state       :290 ][INFO    ][19712] File /etc/apache2/ports.conf is in the correct state
2018-10-13 06:05:36,875 [salt.state       :1941][INFO    ][19712] Completed state [/etc/apache2/ports.conf] at time 06:05:36.875332 duration_in_ms=87.301
2018-10-13 06:05:36,875 [salt.state       :1770][INFO    ][19712] Running state [/etc/apache2/conf-available/security.conf] at time 06:05:36.875796
2018-10-13 06:05:36,876 [salt.state       :1803][INFO    ][19712] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-13 06:05:36,962 [salt.state       :290 ][INFO    ][19712] File /etc/apache2/conf-available/security.conf is in the correct state
2018-10-13 06:05:36,962 [salt.state       :1941][INFO    ][19712] Completed state [/etc/apache2/conf-available/security.conf] at time 06:05:36.962465 duration_in_ms=86.669
2018-10-13 06:05:36,970 [salt.state       :1770][INFO    ][19712] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 06:05:36.970177
2018-10-13 06:05:36,970 [salt.state       :1803][INFO    ][19712] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-13 06:05:36,971 [salt.state       :290 ][INFO    ][19712] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-10-13 06:05:36,971 [salt.state       :1941][INFO    ][19712] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 06:05:36.971641 duration_in_ms=1.464
2018-10-13 06:05:36,972 [salt.state       :1770][INFO    ][19712] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:05:36.972100
2018-10-13 06:05:36,972 [salt.state       :1803][INFO    ][19712] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-13 06:05:37,267 [salt.state       :290 ][INFO    ][19712] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-10-13 06:05:37,267 [salt.state       :1941][INFO    ][19712] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:05:37.267462 duration_in_ms=295.362
2018-10-13 06:05:37,267 [salt.state       :1770][INFO    ][19712] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:05:37.267926
2018-10-13 06:05:37,268 [salt.state       :1803][INFO    ][19712] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-13 06:05:37,594 [salt.state       :290 ][INFO    ][19712] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-10-13 06:05:37,594 [salt.state       :1941][INFO    ][19712] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:05:37.594577 duration_in_ms=326.651
2018-10-13 06:05:37,597 [salt.state       :1770][INFO    ][19712] Running state [apache2] at time 06:05:37.597481
2018-10-13 06:05:37,598 [salt.state       :1803][INFO    ][19712] Executing state service.running for [apache2]
2018-10-13 06:05:37,600 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-13 06:05:37,648 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-13 06:05:37,674 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-13 06:05:37,703 [salt.state       :290 ][INFO    ][19712] The service apache2 is already running
2018-10-13 06:05:37,703 [salt.state       :1941][INFO    ][19712] Completed state [apache2] at time 06:05:37.703667 duration_in_ms=106.186
2018-10-13 06:05:37,705 [salt.state       :1770][INFO    ][19712] Running state [/etc/apache2/conf-enabled/security.conf] at time 06:05:37.705034
2018-10-13 06:05:37,705 [salt.state       :1803][INFO    ][19712] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-13 06:05:37,710 [salt.state       :290 ][INFO    ][19712] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-10-13 06:05:37,710 [salt.state       :1941][INFO    ][19712] Completed state [/etc/apache2/conf-enabled/security.conf] at time 06:05:37.710368 duration_in_ms=5.335
2018-10-13 06:05:37,711 [salt.state       :1770][INFO    ][19712] Running state [panko-api] at time 06:05:37.711809
2018-10-13 06:05:37,712 [salt.state       :1803][INFO    ][19712] Executing state pkg.installed for [panko-api]
2018-10-13 06:05:37,742 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-10-13 06:05:37,896 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-13 06:05:40,370 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:05:40,418 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-10-13 06:05:41,747 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060541728248
2018-10-13 06:05:41,774 [salt.minion      :1431][INFO    ][20178] Starting a new job with PID 20178
2018-10-13 06:05:41,801 [salt.minion      :1708][INFO    ][20178] Returning information for job: 20181013060541728248
2018-10-13 06:05:44,256 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:05:44,325 [salt.state       :290 ][INFO    ][19712] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-10-13 06:05:44,369 [salt.state       :905 ][INFO    ][19712] Loading fresh modules for state activity
2018-10-13 06:05:44,435 [salt.state       :1941][INFO    ][19712] Completed state [panko-api] at time 06:05:44.434990 duration_in_ms=6723.179
2018-10-13 06:05:44,442 [salt.state       :1770][INFO    ][19712] Running state [panko_ssl_mysql] at time 06:05:44.442235
2018-10-13 06:05:44,442 [salt.state       :1803][INFO    ][19712] Executing state test.show_notification for [panko_ssl_mysql]
2018-10-13 06:05:44,443 [salt.state       :290 ][INFO    ][19712] Running panko._ssl.mysql
2018-10-13 06:05:44,443 [salt.state       :1941][INFO    ][19712] Completed state [panko_ssl_mysql] at time 06:05:44.443577 duration_in_ms=1.342
2018-10-13 06:05:44,446 [salt.state       :1770][INFO    ][19712] Running state [/etc/panko/panko.conf] at time 06:05:44.446082
2018-10-13 06:05:44,446 [salt.state       :1803][INFO    ][19712] Executing state file.managed for [/etc/panko/panko.conf]
2018-10-13 06:05:44,482 [salt.fileclient  :1215][INFO    ][19712] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-10-13 06:05:44,554 [salt.fileclient  :1215][INFO    ][19712] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-10-13 06:05:44,584 [salt.fileclient  :1215][INFO    ][19712] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-10-13 06:05:44,700 [salt.state       :290 ][INFO    ][19712] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -466,110 +481,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-10-13 06:05:44,701 [salt.state       :1941][INFO    ][19712] Completed state [/etc/panko/panko.conf] at time 06:05:44.701001 duration_in_ms=254.919
2018-10-13 06:05:44,705 [salt.state       :1770][INFO    ][19712] Running state [/usr/bin/panko-expirer --use-syslog] at time 06:05:44.705297
2018-10-13 06:05:44,705 [salt.state       :1803][INFO    ][19712] Executing state cron.present for [/usr/bin/panko-expirer --use-syslog]
2018-10-13 06:05:44,709 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command 'crontab -u panko -l' in directory '/root'
2018-10-13 06:05:44,741 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][19712] Command '['crontab', '-u', 'panko', '-l']' failed with return code: 1
2018-10-13 06:05:44,742 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][19712] stderr: no crontab for panko

2018-10-13 06:05:44,742 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][19712] retcode: 1
2018-10-13 06:05:44,744 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command 'crontab -u panko /tmp/__salt.tmp.vvtlRv' in directory '/root'
2018-10-13 06:05:44,792 [salt.state       :290 ][INFO    ][19712] {'panko': '/usr/bin/panko-expirer --use-syslog'}
2018-10-13 06:05:44,792 [salt.state       :1941][INFO    ][19712] Completed state [/usr/bin/panko-expirer --use-syslog] at time 06:05:44.792662 duration_in_ms=87.365
2018-10-13 06:05:44,794 [salt.state       :1770][INFO    ][19712] Running state [panko-dbsync] at time 06:05:44.794920
2018-10-13 06:05:44,795 [salt.state       :1803][INFO    ][19712] Executing state cmd.run for [panko-dbsync]
2018-10-13 06:05:44,796 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command 'panko-dbsync' in directory '/root'
2018-10-13 06:05:46,933 [salt.state       :290 ][INFO    ][19712] {'pid': 20336, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-13 06:05:46,934 [salt.state       :1941][INFO    ][19712] Completed state [panko-dbsync] at time 06:05:46.934481 duration_in_ms=2139.56
2018-10-13 06:05:46,948 [salt.state       :1770][INFO    ][19712] Running state [wsgi_panko] at time 06:05:46.948715
2018-10-13 06:05:46,949 [salt.state       :1803][INFO    ][19712] Executing state apache_site.enabled for [wsgi_panko]
2018-10-13 06:05:46,949 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-10-13 06:05:47,033 [salt.state       :290 ][INFO    ][19712] {'new': 'wsgi_panko', 'old': None}
2018-10-13 06:05:47,033 [salt.state       :1941][INFO    ][19712] Completed state [wsgi_panko] at time 06:05:47.033481 duration_in_ms=84.766
2018-10-13 06:05:47,800 [salt.state       :1770][INFO    ][19712] Running state [apache2] at time 06:05:47.800759
2018-10-13 06:05:47,801 [salt.state       :1803][INFO    ][19712] Executing state service.running for [apache2]
2018-10-13 06:05:47,803 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-13 06:05:47,828 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-13 06:05:47,857 [salt.state       :290 ][INFO    ][19712] The service apache2 is already running
2018-10-13 06:05:47,858 [salt.state       :1941][INFO    ][19712] Completed state [apache2] at time 06:05:47.858439 duration_in_ms=57.68
2018-10-13 06:05:47,859 [salt.state       :1770][INFO    ][19712] Running state [apache2] at time 06:05:47.859277
2018-10-13 06:05:47,860 [salt.state       :1803][INFO    ][19712] Executing state service.mod_watch for [apache2]
2018-10-13 06:05:47,862 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-13 06:05:47,887 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19712] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-13 06:05:50,267 [salt.state       :290 ][INFO    ][19712] {'apache2': True}
2018-10-13 06:05:50,268 [salt.state       :1941][INFO    ][19712] Completed state [apache2] at time 06:05:50.268212 duration_in_ms=2408.934
2018-10-13 06:05:50,274 [salt.minion      :1708][INFO    ][19712] Returning information for job: 20181013060526489092
2018-10-13 06:06:15,901 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command test.ping with jid 20181013060615888030
2018-10-13 06:06:15,924 [salt.minion      :1431][INFO    ][20500] Starting a new job with PID 20500
2018-10-13 06:06:15,957 [salt.minion      :1708][INFO    ][20500] Returning information for job: 20181013060615888030
2018-10-13 06:07:40,349 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013060740334179
2018-10-13 06:07:40,376 [salt.minion      :1431][INFO    ][20505] Starting a new job with PID 20505
2018-10-13 06:07:45,470 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060745456996
2018-10-13 06:07:45,501 [salt.minion      :1431][INFO    ][20510] Starting a new job with PID 20510
2018-10-13 06:07:45,549 [salt.minion      :1708][INFO    ][20510] Returning information for job: 20181013060745456996
2018-10-13 06:07:46,517 [salt.state       :905 ][INFO    ][20505] Loading fresh modules for state activity
2018-10-13 06:07:46,607 [salt.fileclient  :1215][INFO    ][20505] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-10-13 06:07:46,648 [salt.fileclient  :1215][INFO    ][20505] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-10-13 06:07:46,882 [salt.fileclient  :1215][INFO    ][20505] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-10-13 06:07:46,966 [salt.fileclient  :1215][INFO    ][20505] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-10-13 06:07:49,266 [salt.state       :1770][INFO    ][20505] Running state [aodh-api] at time 06:07:49.265413
2018-10-13 06:07:49,267 [salt.state       :1803][INFO    ][20505] Executing state pkg.installed for [aodh-api]
2018-10-13 06:07:49,268 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:07:49,887 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-10-13 06:07:50,080 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-13 06:07:52,631 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:07:52,672 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-10-13 06:07:55,620 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060755598633
2018-10-13 06:07:55,646 [salt.minion      :1431][INFO    ][20968] Starting a new job with PID 20968
2018-10-13 06:07:55,680 [salt.minion      :1708][INFO    ][20968] Returning information for job: 20181013060755598633
2018-10-13 06:08:05,768 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060805750524
2018-10-13 06:08:05,785 [salt.minion      :1431][INFO    ][24202] Starting a new job with PID 24202
2018-10-13 06:08:05,816 [salt.minion      :1708][INFO    ][24202] Returning information for job: 20181013060805750524
2018-10-13 06:08:10,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:08:10,512 [salt.state       :290 ][INFO    ][20505] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'c++-compiler' changed from 'absent' to '1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-137.163'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev' changed from 'absent' to '1'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'binutils-gold' changed from 'absent' to '1'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-10-13 06:08:10,564 [salt.state       :905 ][INFO    ][20505] Loading fresh modules for state activity
2018-10-13 06:08:10,836 [salt.state       :1941][INFO    ][20505] Completed state [aodh-api] at time 06:08:10.836668 duration_in_ms=21571.256
2018-10-13 06:08:10,845 [salt.state       :1770][INFO    ][20505] Running state [aodh-evaluator] at time 06:08:10.845495
2018-10-13 06:08:10,846 [salt.state       :1803][INFO    ][20505] Executing state pkg.installed for [aodh-evaluator]
2018-10-13 06:08:11,822 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:08:11,869 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-10-13 06:08:15,899 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060815887651
2018-10-13 06:08:15,928 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:08:15,941 [salt.minion      :1431][INFO    ][26386] Starting a new job with PID 26386
2018-10-13 06:08:15,982 [salt.minion      :1708][INFO    ][26386] Returning information for job: 20181013060815887651
2018-10-13 06:08:16,019 [salt.state       :290 ][INFO    ][20505] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-13 06:08:16,056 [salt.state       :905 ][INFO    ][20505] Loading fresh modules for state activity
2018-10-13 06:08:16,106 [salt.state       :1941][INFO    ][20505] Completed state [aodh-evaluator] at time 06:08:16.105991 duration_in_ms=5260.496
2018-10-13 06:08:16,114 [salt.state       :1770][INFO    ][20505] Running state [aodh-notifier] at time 06:08:16.114551
2018-10-13 06:08:16,115 [salt.state       :1803][INFO    ][20505] Executing state pkg.installed for [aodh-notifier]
2018-10-13 06:08:17,518 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:08:17,569 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-10-13 06:08:21,521 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:08:21,590 [salt.state       :290 ][INFO    ][20505] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-13 06:08:21,623 [salt.state       :905 ][INFO    ][20505] Loading fresh modules for state activity
2018-10-13 06:08:21,675 [salt.state       :1941][INFO    ][20505] Completed state [aodh-notifier] at time 06:08:21.675289 duration_in_ms=5560.737
2018-10-13 06:08:21,683 [salt.state       :1770][INFO    ][20505] Running state [aodh-listener] at time 06:08:21.683855
2018-10-13 06:08:21,684 [salt.state       :1803][INFO    ][20505] Executing state pkg.installed for [aodh-listener]
2018-10-13 06:08:23,077 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:08:23,126 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-10-13 06:08:26,107 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060826091443
2018-10-13 06:08:26,135 [salt.minion      :1431][INFO    ][26939] Starting a new job with PID 26939
2018-10-13 06:08:26,204 [salt.minion      :1708][INFO    ][26939] Returning information for job: 20181013060826091443
2018-10-13 06:08:27,274 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:08:27,336 [salt.state       :290 ][INFO    ][20505] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-13 06:08:27,372 [salt.state       :905 ][INFO    ][20505] Loading fresh modules for state activity
2018-10-13 06:08:27,436 [salt.state       :1941][INFO    ][20505] Completed state [aodh-listener] at time 06:08:27.436127 duration_in_ms=5752.27
2018-10-13 06:08:27,447 [salt.state       :1770][INFO    ][20505] Running state [python-aodhclient] at time 06:08:27.447712
2018-10-13 06:08:27,448 [salt.state       :1803][INFO    ][20505] Executing state pkg.installed for [python-aodhclient]
2018-10-13 06:08:28,691 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:08:28,734 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-10-13 06:08:31,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:08:31,428 [salt.state       :290 ][INFO    ][20505] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-10-13 06:08:31,474 [salt.state       :905 ][INFO    ][20505] Loading fresh modules for state activity
2018-10-13 06:08:31,529 [salt.state       :1941][INFO    ][20505] Completed state [python-aodhclient] at time 06:08:31.529678 duration_in_ms=4081.964
2018-10-13 06:08:31,534 [salt.state       :1770][INFO    ][20505] Running state [aodh_ssl_mysql] at time 06:08:31.534651
2018-10-13 06:08:31,536 [salt.state       :1803][INFO    ][20505] Executing state test.show_notification for [aodh_ssl_mysql]
2018-10-13 06:08:31,537 [salt.state       :290 ][INFO    ][20505] Running aodh._ssl.mysql
2018-10-13 06:08:31,537 [salt.state       :1941][INFO    ][20505] Completed state [aodh_ssl_mysql] at time 06:08:31.537877 duration_in_ms=3.226
2018-10-13 06:08:31,538 [salt.state       :1770][INFO    ][20505] Running state [aodh_ssl_rabbitmq] at time 06:08:31.538534
2018-10-13 06:08:31,539 [salt.state       :1803][INFO    ][20505] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-10-13 06:08:31,540 [salt.state       :290 ][INFO    ][20505] Running aodh._ssl.rabbitmq
2018-10-13 06:08:31,540 [salt.state       :1941][INFO    ][20505] Completed state [aodh_ssl_rabbitmq] at time 06:08:31.540636 duration_in_ms=2.102
2018-10-13 06:08:31,545 [salt.state       :1770][INFO    ][20505] Running state [/etc/aodh/aodh.conf] at time 06:08:31.544973
2018-10-13 06:08:31,545 [salt.state       :1803][INFO    ][20505] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-10-13 06:08:31,593 [salt.fileclient  :1215][INFO    ][20505] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-10-13 06:08:31,673 [salt.fileclient  :1215][INFO    ][20505] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-10-13 06:08:31,796 [salt.fileclient  :1215][INFO    ][20505] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-10-13 06:08:31,812 [salt.fileclient  :1215][INFO    ][20505] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-10-13 06:08:31,859 [salt.state       :290 ][INFO    ][20505] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.32
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,291 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +862,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +878,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +916,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -775,995 +1034,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-10-13 06:08:31,869 [salt.state       :1941][INFO    ][20505] Completed state [/etc/aodh/aodh.conf] at time 06:08:31.869391 duration_in_ms=324.418
2018-10-13 06:08:31,869 [salt.state       :1770][INFO    ][20505] Running state [/etc/default/aodh-evaluator] at time 06:08:31.869866
2018-10-13 06:08:31,870 [salt.state       :1803][INFO    ][20505] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-10-13 06:08:31,908 [salt.fileclient  :1215][INFO    ][20505] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-10-13 06:08:31,959 [salt.state       :290 ][INFO    ][20505] File changed:
New file
2018-10-13 06:08:31,960 [salt.state       :1941][INFO    ][20505] Completed state [/etc/default/aodh-evaluator] at time 06:08:31.960184 duration_in_ms=90.318
2018-10-13 06:08:31,960 [salt.state       :1770][INFO    ][20505] Running state [/etc/default/aodh-notifier] at time 06:08:31.960628
2018-10-13 06:08:31,960 [salt.state       :1803][INFO    ][20505] Executing state file.managed for [/etc/default/aodh-notifier]
2018-10-13 06:08:32,005 [salt.state       :290 ][INFO    ][20505] File changed:
New file
2018-10-13 06:08:32,005 [salt.state       :1941][INFO    ][20505] Completed state [/etc/default/aodh-notifier] at time 06:08:32.005191 duration_in_ms=44.563
2018-10-13 06:08:32,005 [salt.state       :1770][INFO    ][20505] Running state [/etc/default/aodh-listener] at time 06:08:32.005629
2018-10-13 06:08:32,005 [salt.state       :1803][INFO    ][20505] Executing state file.managed for [/etc/default/aodh-listener]
2018-10-13 06:08:32,033 [salt.state       :290 ][INFO    ][20505] File changed:
New file
2018-10-13 06:08:32,033 [salt.state       :1941][INFO    ][20505] Completed state [/etc/default/aodh-listener] at time 06:08:32.033652 duration_in_ms=28.023
2018-10-13 06:08:32,043 [salt.state       :1770][INFO    ][20505] Running state [aodh-dbsync] at time 06:08:32.043377
2018-10-13 06:08:32,043 [salt.state       :1803][INFO    ][20505] Executing state cmd.run for [aodh-dbsync]
2018-10-13 06:08:32,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command 'aodh-dbsync' in directory '/root'
2018-10-13 06:08:34,852 [salt.state       :290 ][INFO    ][20505] {'pid': 27141, 'retcode': 0, 'stderr': '', 'stdout': '2018-10-13 06:08:34.691 27142 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-10-13 06:08:34.692 27142 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-10-13 06:08:34,853 [salt.state       :1941][INFO    ][20505] Completed state [aodh-dbsync] at time 06:08:34.852990 duration_in_ms=2809.612
2018-10-13 06:08:34,862 [salt.state       :1770][INFO    ][20505] Running state [/usr/bin/aodh-expirer] at time 06:08:34.861984
2018-10-13 06:08:34,862 [salt.state       :1803][INFO    ][20505] Executing state cron.present for [/usr/bin/aodh-expirer]
2018-10-13 06:08:34,864 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command 'crontab -u aodh -l' in directory '/root'
2018-10-13 06:08:34,885 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][20505] Command '['crontab', '-u', 'aodh', '-l']' failed with return code: 1
2018-10-13 06:08:34,886 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][20505] stderr: no crontab for aodh

2018-10-13 06:08:34,886 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][20505] retcode: 1
2018-10-13 06:08:34,889 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command 'crontab -u aodh /tmp/__salt.tmp.bxSH2o' in directory '/root'
2018-10-13 06:08:34,914 [salt.state       :290 ][INFO    ][20505] {'aodh': '/usr/bin/aodh-expirer'}
2018-10-13 06:08:34,915 [salt.state       :1941][INFO    ][20505] Completed state [/usr/bin/aodh-expirer] at time 06:08:34.915142 duration_in_ms=53.158
2018-10-13 06:08:34,916 [salt.state       :1770][INFO    ][20505] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 06:08:34.916794
2018-10-13 06:08:34,917 [salt.state       :1803][INFO    ][20505] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-10-13 06:08:34,946 [salt.fileclient  :1215][INFO    ][20505] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-10-13 06:08:34,990 [salt.state       :290 ][INFO    ][20505] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.32:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-10-13 06:08:34,991 [salt.state       :1941][INFO    ][20505] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 06:08:34.990957 duration_in_ms=74.163
2018-10-13 06:08:34,991 [salt.state       :1770][INFO    ][20505] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 06:08:34.991216
2018-10-13 06:08:34,993 [salt.state       :1803][INFO    ][20505] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-10-13 06:08:35,004 [salt.state       :290 ][INFO    ][20505] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-10-13 06:08:35,004 [salt.state       :1941][INFO    ][20505] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 06:08:35.004870 duration_in_ms=13.654
2018-10-13 06:08:35,746 [salt.state       :1770][INFO    ][20505] Running state [apache2] at time 06:08:35.746285
2018-10-13 06:08:35,747 [salt.state       :1803][INFO    ][20505] Executing state service.running for [apache2]
2018-10-13 06:08:35,749 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-13 06:08:35,777 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-13 06:08:35,802 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-13 06:08:35,832 [salt.state       :290 ][INFO    ][20505] The service apache2 is already running
2018-10-13 06:08:35,834 [salt.state       :1941][INFO    ][20505] Completed state [apache2] at time 06:08:35.834538 duration_in_ms=88.253
2018-10-13 06:08:35,835 [salt.state       :1770][INFO    ][20505] Running state [apache2] at time 06:08:35.835195
2018-10-13 06:08:35,836 [salt.state       :1803][INFO    ][20505] Executing state service.mod_watch for [apache2]
2018-10-13 06:08:35,838 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-13 06:08:35,866 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-13 06:08:36,331 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060836314343
2018-10-13 06:08:36,355 [salt.minion      :1431][INFO    ][27202] Starting a new job with PID 27202
2018-10-13 06:08:36,381 [salt.minion      :1708][INFO    ][27202] Returning information for job: 20181013060836314343
2018-10-13 06:08:38,268 [salt.state       :290 ][INFO    ][20505] {'apache2': True}
2018-10-13 06:08:38,268 [salt.state       :1941][INFO    ][20505] Completed state [apache2] at time 06:08:38.268758 duration_in_ms=2433.563
2018-10-13 06:08:38,270 [salt.state       :1770][INFO    ][20505] Running state [aodh-evaluator] at time 06:08:38.270615
2018-10-13 06:08:38,273 [salt.state       :1803][INFO    ][20505] Executing state service.running for [aodh-evaluator]
2018-10-13 06:08:38,275 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-10-13 06:08:38,305 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-13 06:08:38,329 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-10-13 06:08:38,351 [salt.state       :290 ][INFO    ][20505] The service aodh-evaluator is already running
2018-10-13 06:08:38,352 [salt.state       :1941][INFO    ][20505] Completed state [aodh-evaluator] at time 06:08:38.352152 duration_in_ms=81.536
2018-10-13 06:08:38,352 [salt.state       :1770][INFO    ][20505] Running state [aodh-evaluator] at time 06:08:38.352474
2018-10-13 06:08:38,353 [salt.state       :1803][INFO    ][20505] Executing state service.mod_watch for [aodh-evaluator]
2018-10-13 06:08:38,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-13 06:08:38,377 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-10-13 06:08:38,556 [salt.state       :290 ][INFO    ][20505] {'aodh-evaluator': True}
2018-10-13 06:08:38,556 [salt.state       :1941][INFO    ][20505] Completed state [aodh-evaluator] at time 06:08:38.556840 duration_in_ms=204.365
2018-10-13 06:08:38,564 [salt.state       :1770][INFO    ][20505] Running state [aodh-notifier] at time 06:08:38.564609
2018-10-13 06:08:38,568 [salt.state       :1803][INFO    ][20505] Executing state service.running for [aodh-notifier]
2018-10-13 06:08:38,569 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-10-13 06:08:38,618 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-13 06:08:38,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-10-13 06:08:38,685 [salt.state       :290 ][INFO    ][20505] The service aodh-notifier is already running
2018-10-13 06:08:38,686 [salt.state       :1941][INFO    ][20505] Completed state [aodh-notifier] at time 06:08:38.686187 duration_in_ms=121.578
2018-10-13 06:08:38,686 [salt.state       :1770][INFO    ][20505] Running state [aodh-notifier] at time 06:08:38.686512
2018-10-13 06:08:38,687 [salt.state       :1803][INFO    ][20505] Executing state service.mod_watch for [aodh-notifier]
2018-10-13 06:08:38,688 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-13 06:08:38,729 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-10-13 06:08:46,472 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060846453444
2018-10-13 06:08:46,493 [salt.minion      :1431][INFO    ][27418] Starting a new job with PID 27418
2018-10-13 06:08:46,518 [salt.minion      :1708][INFO    ][27418] Returning information for job: 20181013060846453444
2018-10-13 06:08:53,800 [salt.state       :290 ][INFO    ][20505] {'aodh-notifier': True}
2018-10-13 06:08:53,801 [salt.state       :1941][INFO    ][20505] Completed state [aodh-notifier] at time 06:08:53.801173 duration_in_ms=15114.66
2018-10-13 06:08:53,802 [salt.state       :1770][INFO    ][20505] Running state [aodh-listener] at time 06:08:53.802314
2018-10-13 06:08:53,811 [salt.state       :1803][INFO    ][20505] Executing state service.running for [aodh-listener]
2018-10-13 06:08:53,812 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-10-13 06:08:53,846 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-13 06:08:53,878 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-10-13 06:08:53,899 [salt.state       :290 ][INFO    ][20505] The service aodh-listener is already running
2018-10-13 06:08:53,900 [salt.state       :1941][INFO    ][20505] Completed state [aodh-listener] at time 06:08:53.900660 duration_in_ms=98.346
2018-10-13 06:08:53,901 [salt.state       :1770][INFO    ][20505] Running state [aodh-listener] at time 06:08:53.901257
2018-10-13 06:08:53,901 [salt.state       :1803][INFO    ][20505] Executing state service.mod_watch for [aodh-listener]
2018-10-13 06:08:53,904 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-13 06:08:53,925 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20505] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-10-13 06:08:56,644 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060856624811
2018-10-13 06:08:56,667 [salt.minion      :1431][INFO    ][27494] Starting a new job with PID 27494
2018-10-13 06:08:56,689 [salt.minion      :1708][INFO    ][27494] Returning information for job: 20181013060856624811
2018-10-13 06:09:06,793 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013060906780152
2018-10-13 06:09:06,823 [salt.minion      :1431][INFO    ][27506] Starting a new job with PID 27506
2018-10-13 06:09:06,853 [salt.minion      :1708][INFO    ][27506] Returning information for job: 20181013060906780152
2018-10-13 06:09:09,050 [salt.state       :290 ][INFO    ][20505] {'aodh-listener': True}
2018-10-13 06:09:09,050 [salt.state       :1941][INFO    ][20505] Completed state [aodh-listener] at time 06:09:09.050552 duration_in_ms=15149.294
2018-10-13 06:09:09,061 [salt.minion      :1708][INFO    ][20505] Returning information for job: 20181013060740334179
2018-10-13 06:10:41,650 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command state.sls with jid 20181013061041636143
2018-10-13 06:10:41,678 [salt.minion      :1431][INFO    ][27559] Starting a new job with PID 27559
2018-10-13 06:10:46,745 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013061046729125
2018-10-13 06:10:46,768 [salt.minion      :1431][INFO    ][27564] Starting a new job with PID 27564
2018-10-13 06:10:46,796 [salt.minion      :1708][INFO    ][27564] Returning information for job: 20181013061046729125
2018-10-13 06:10:48,730 [salt.state       :905 ][INFO    ][27559] Loading fresh modules for state activity
2018-10-13 06:10:48,806 [salt.fileclient  :1215][INFO    ][27559] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-10-13 06:10:48,848 [salt.fileclient  :1215][INFO    ][27559] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-10-13 06:10:51,313 [salt.state       :1770][INFO    ][27559] Running state [ceilometer-agent-central] at time 06:10:51.313760
2018-10-13 06:10:51,314 [salt.state       :1803][INFO    ][27559] Executing state pkg.installed for [ceilometer-agent-central]
2018-10-13 06:10:51,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:10:51,991 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-10-13 06:10:52,170 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-13 06:10:54,674 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:10:54,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-10-13 06:10:56,843 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013061056825958
2018-10-13 06:10:56,861 [salt.minion      :1431][INFO    ][27964] Starting a new job with PID 27964
2018-10-13 06:10:56,890 [salt.minion      :1708][INFO    ][27964] Returning information for job: 20181013061056825958
2018-10-13 06:11:07,066 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013061107045540
2018-10-13 06:11:07,087 [salt.minion      :1431][INFO    ][29017] Starting a new job with PID 29017
2018-10-13 06:11:07,115 [salt.minion      :1708][INFO    ][29017] Returning information for job: 20181013061107045540
2018-10-13 06:11:17,285 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013061117269076
2018-10-13 06:11:17,306 [salt.minion      :1431][INFO    ][29958] Starting a new job with PID 29958
2018-10-13 06:11:17,332 [salt.minion      :1708][INFO    ][29958] Returning information for job: 20181013061117269076
2018-10-13 06:11:19,568 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:11:19,642 [salt.state       :290 ][INFO    ][27559] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'ibverbs-providers' changed from 'absent' to '17.1-1~cloud0'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmthca1' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libipathverbs1' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libmlx4-1' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libmlx5-1' changed from 'absent' to '1'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '17.1-1~cloud0'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libnes1' changed from 'absent' to '1'
'librados2' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'libcxgb3-1' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'librdmacm1' changed from 'absent' to '17.1-1~cloud0'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-10-13 06:11:19,687 [salt.state       :905 ][INFO    ][27559] Loading fresh modules for state activity
2018-10-13 06:11:19,980 [salt.state       :1941][INFO    ][27559] Completed state [ceilometer-agent-central] at time 06:11:19.980280 duration_in_ms=28666.521
2018-10-13 06:11:19,988 [salt.state       :1770][INFO    ][27559] Running state [python-ceilometerclient] at time 06:11:19.988525
2018-10-13 06:11:19,988 [salt.state       :1803][INFO    ][27559] Executing state pkg.installed for [python-ceilometerclient]
2018-10-13 06:11:20,986 [salt.state       :290 ][INFO    ][27559] All specified packages are already installed
2018-10-13 06:11:20,986 [salt.state       :1941][INFO    ][27559] Completed state [python-ceilometerclient] at time 06:11:20.986716 duration_in_ms=998.19
2018-10-13 06:11:20,987 [salt.state       :1770][INFO    ][27559] Running state [ceilometer-agent-notification] at time 06:11:20.987113
2018-10-13 06:11:20,987 [salt.state       :1803][INFO    ][27559] Executing state pkg.installed for [ceilometer-agent-notification]
2018-10-13 06:11:21,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-13 06:11:21,069 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-10-13 06:11:25,944 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-13 06:11:26,009 [salt.state       :290 ][INFO    ][27559] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-10-13 06:11:26,047 [salt.state       :905 ][INFO    ][27559] Loading fresh modules for state activity
2018-10-13 06:11:26,107 [salt.state       :1941][INFO    ][27559] Completed state [ceilometer-agent-notification] at time 06:11:26.107165 duration_in_ms=5120.051
2018-10-13 06:11:26,120 [salt.state       :1770][INFO    ][27559] Running state [/etc/ceilometer/ceilometer.conf] at time 06:11:26.120352
2018-10-13 06:11:26,121 [salt.state       :1803][INFO    ][27559] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-10-13 06:11:26,181 [salt.fileclient  :1215][INFO    ][27559] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-10-13 06:11:26,536 [salt.fileclient  :1215][INFO    ][27559] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-10-13 06:11:26,568 [salt.fileclient  :1215][INFO    ][27559] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-10-13 06:11:26,611 [salt.state       :290 ][INFO    ][27559] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-10-13 06:11:26,635 [salt.state       :1941][INFO    ][27559] Completed state [/etc/ceilometer/ceilometer.conf] at time 06:11:26.635863 duration_in_ms=515.511
2018-10-13 06:11:26,636 [salt.state       :1770][INFO    ][27559] Running state [/etc/default/ceilometer-agent-central] at time 06:11:26.636319
2018-10-13 06:11:26,636 [salt.state       :1803][INFO    ][27559] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-10-13 06:11:26,681 [salt.fileclient  :1215][INFO    ][27559] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-10-13 06:11:26,713 [salt.state       :290 ][INFO    ][27559] File changed:
New file
2018-10-13 06:11:26,713 [salt.state       :1941][INFO    ][27559] Completed state [/etc/default/ceilometer-agent-central] at time 06:11:26.713819 duration_in_ms=77.5
2018-10-13 06:11:26,714 [salt.state       :1770][INFO    ][27559] Running state [/etc/default/ceilometer-agent-notification] at time 06:11:26.714238
2018-10-13 06:11:26,714 [salt.state       :1803][INFO    ][27559] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-10-13 06:11:26,806 [salt.state       :290 ][INFO    ][27559] File changed:
New file
2018-10-13 06:11:26,806 [salt.state       :1941][INFO    ][27559] Completed state [/etc/default/ceilometer-agent-notification] at time 06:11:26.806522 duration_in_ms=92.282
2018-10-13 06:11:26,829 [salt.state       :1770][INFO    ][27559] Running state [python-gnocchiclient] at time 06:11:26.829710
2018-10-13 06:11:26,829 [salt.state       :1803][INFO    ][27559] Executing state pkg.latest for [python-gnocchiclient]
2018-10-13 06:11:26,873 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-10-13 06:11:27,272 [salt.state       :290 ][INFO    ][27559] Package python-gnocchiclient is already up-to-date
2018-10-13 06:11:27,272 [salt.state       :1941][INFO    ][27559] Completed state [python-gnocchiclient] at time 06:11:27.272657 duration_in_ms=442.947
2018-10-13 06:11:27,273 [salt.state       :1770][INFO    ][27559] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 06:11:27.273837
2018-10-13 06:11:27,274 [salt.state       :1803][INFO    ][27559] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2018-10-13 06:11:27,324 [salt.fileclient  :1215][INFO    ][27559] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gnocchi_resources.yaml'
2018-10-13 06:11:27,377 [salt.state       :290 ][INFO    ][27559] File changed:
New file
2018-10-13 06:11:27,377 [salt.state       :1941][INFO    ][27559] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 06:11:27.377341 duration_in_ms=103.504
2018-10-13 06:11:27,379 [salt.state       :1770][INFO    ][27559] Running state [ceilometer-upgrade] at time 06:11:27.379596
2018-10-13 06:11:27,380 [salt.state       :1803][INFO    ][27559] Executing state cmd.run for [ceilometer-upgrade]
2018-10-13 06:11:27,381 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command 'ceilometer-upgrade' in directory '/root'
2018-10-13 06:11:27,764 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013061127445756
2018-10-13 06:11:27,811 [salt.minion      :1431][INFO    ][30403] Starting a new job with PID 30403
2018-10-13 06:11:27,864 [salt.minion      :1708][INFO    ][30403] Returning information for job: 20181013061127445756
2018-10-13 06:11:37,534 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013061137522196
2018-10-13 06:11:37,553 [salt.minion      :1431][INFO    ][30419] Starting a new job with PID 30419
2018-10-13 06:11:37,581 [salt.minion      :1708][INFO    ][30419] Returning information for job: 20181013061137522196
2018-10-13 06:11:45,965 [salt.state       :290 ][INFO    ][27559] {'pid': 30398, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-13 06:11:45,969 [salt.state       :1941][INFO    ][27559] Completed state [ceilometer-upgrade] at time 06:11:45.968036 duration_in_ms=18588.44
2018-10-13 06:11:45,970 [salt.state       :1770][INFO    ][27559] Running state [/etc/ceilometer/pipeline.yaml] at time 06:11:45.970133
2018-10-13 06:11:45,970 [salt.state       :1803][INFO    ][27559] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-10-13 06:11:46,001 [salt.fileclient  :1215][INFO    ][27559] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-10-13 06:11:46,111 [salt.state       :290 ][INFO    ][27559] File changed:
New file
2018-10-13 06:11:46,111 [salt.state       :1941][INFO    ][27559] Completed state [/etc/ceilometer/pipeline.yaml] at time 06:11:46.111790 duration_in_ms=141.657
2018-10-13 06:11:46,112 [salt.state       :1770][INFO    ][27559] Running state [/etc/ceilometer/event_pipeline.yaml] at time 06:11:46.112666
2018-10-13 06:11:46,113 [salt.state       :1803][INFO    ][27559] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-10-13 06:11:46,132 [salt.fileclient  :1215][INFO    ][27559] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-10-13 06:11:46,219 [salt.state       :290 ][INFO    ][27559] File changed:
New file
2018-10-13 06:11:46,219 [salt.state       :1941][INFO    ][27559] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 06:11:46.219829 duration_in_ms=107.163
2018-10-13 06:11:46,220 [salt.state       :1770][INFO    ][27559] Running state [/etc/ceilometer/event_definitions.yaml] at time 06:11:46.220932
2018-10-13 06:11:46,221 [salt.state       :1803][INFO    ][27559] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-10-13 06:11:46,245 [salt.fileclient  :1215][INFO    ][27559] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-10-13 06:11:46,269 [salt.state       :290 ][INFO    ][27559] File changed:
New file
2018-10-13 06:11:46,269 [salt.state       :1941][INFO    ][27559] Completed state [/etc/ceilometer/event_definitions.yaml] at time 06:11:46.269448 duration_in_ms=48.516
2018-10-13 06:11:46,270 [salt.state       :1770][INFO    ][27559] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 06:11:46.270027
2018-10-13 06:11:46,270 [salt.state       :1803][INFO    ][27559] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-10-13 06:11:46,293 [salt.fileclient  :1215][INFO    ][27559] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-10-13 06:11:46,309 [salt.state       :290 ][INFO    ][27559] File changed:
New file
2018-10-13 06:11:46,309 [salt.state       :1941][INFO    ][27559] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 06:11:46.309568 duration_in_ms=39.54
2018-10-13 06:11:47,209 [salt.state       :1770][INFO    ][27559] Running state [ceilometer-agent-central] at time 06:11:47.209763
2018-10-13 06:11:47,210 [salt.state       :1803][INFO    ][27559] Executing state service.running for [ceilometer-agent-central]
2018-10-13 06:11:47,212 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-10-13 06:11:47,249 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-13 06:11:47,278 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-13 06:11:47,306 [salt.state       :290 ][INFO    ][27559] The service ceilometer-agent-central is already running
2018-10-13 06:11:47,309 [salt.state       :1941][INFO    ][27559] Completed state [ceilometer-agent-central] at time 06:11:47.308903 duration_in_ms=99.14
2018-10-13 06:11:47,309 [salt.state       :1770][INFO    ][27559] Running state [ceilometer-agent-central] at time 06:11:47.309379
2018-10-13 06:11:47,310 [salt.state       :1803][INFO    ][27559] Executing state service.mod_watch for [ceilometer-agent-central]
2018-10-13 06:11:47,311 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-13 06:11:47,345 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-13 06:11:47,632 [salt.state       :290 ][INFO    ][27559] {'ceilometer-agent-central': True}
2018-10-13 06:11:47,633 [salt.state       :1941][INFO    ][27559] Completed state [ceilometer-agent-central] at time 06:11:47.633503 duration_in_ms=324.123
2018-10-13 06:11:47,638 [salt.state       :1770][INFO    ][27559] Running state [ceilometer-agent-notification] at time 06:11:47.638048
2018-10-13 06:11:47,638 [salt.state       :1803][INFO    ][27559] Executing state service.running for [ceilometer-agent-notification]
2018-10-13 06:11:47,642 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-10-13 06:11:47,686 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-13 06:11:47,712 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-13 06:11:47,735 [salt.state       :290 ][INFO    ][27559] The service ceilometer-agent-notification is already running
2018-10-13 06:11:47,738 [salt.state       :1941][INFO    ][27559] Completed state [ceilometer-agent-notification] at time 06:11:47.738814 duration_in_ms=100.766
2018-10-13 06:11:47,739 [salt.state       :1770][INFO    ][27559] Running state [ceilometer-agent-notification] at time 06:11:47.739784
2018-10-13 06:11:47,742 [salt.state       :1803][INFO    ][27559] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-10-13 06:11:47,743 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-13 06:11:47,755 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command saltutil.find_job with jid 20181013061147740157
2018-10-13 06:11:47,775 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27559] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-13 06:11:47,794 [salt.minion      :1431][INFO    ][30482] Starting a new job with PID 30482
2018-10-13 06:11:47,839 [salt.minion      :1708][INFO    ][30482] Returning information for job: 20181013061147740157
2018-10-13 06:11:47,973 [salt.state       :290 ][INFO    ][27559] {'ceilometer-agent-notification': True}
2018-10-13 06:11:47,974 [salt.state       :1941][INFO    ][27559] Completed state [ceilometer-agent-notification] at time 06:11:47.974098 duration_in_ms=234.313
2018-10-13 06:11:47,980 [salt.minion      :1708][INFO    ][27559] Returning information for job: 20181013061041636143
2018-10-13 06:20:09,193 [salt.minion      :1307][INFO    ][2926] User sudo_ubuntu Executing command cp.push_dir with jid 20181013062009181666
2018-10-13 06:20:09,231 [salt.minion      :1431][INFO    ][30588] Starting a new job with PID 30588
