2018-10-10 21:29:47,273 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,406 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,410 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,413 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,417 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,729 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,733 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,736 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,793 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,798 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,801 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,805 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:47,921 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,049 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,055 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,059 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,065 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,070 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,076 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,079 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,086 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,090 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,095 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,099 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,106 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,110 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,114 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,118 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,122 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,127 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,131 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,135 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,140 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,143 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,148 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,151 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,156 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,161 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,165 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,169 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,175 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,180 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,184 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,189 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,194 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,197 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,203 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,207 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,212 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,216 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,221 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,225 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,230 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,234 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,239 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,244 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:29:48,248 [salt.utils.decorators:82  ][ERROR   ][1689] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-10 21:30:16,375 [salt.utils.decorators:613 ][WARNING ][1689] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-10 21:30:19,485 [salt.loaded.int.states.file:2150][WARNING ][1689] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-10 21:30:21,689 [salt.loaded.int.states.file:2150][WARNING ][1689] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-10 21:30:26,535 [salt.loaded.int.states.file:2150][WARNING ][1689] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-10 21:30:31,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2900] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-10-10 21:30:31,233 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2900] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-10-10 21:30:31,260 [salt.utils.parsers:1051][WARNING ][1332] Minion received a SIGTERM. Exiting.
2018-10-10 21:30:32,223 [salt.cli.daemons :293 ][INFO    ][2952] Setting up the Salt Minion "mdb03.mcp-ovs-ha.local"
2018-10-10 21:30:32,392 [salt.cli.daemons :82  ][INFO    ][2952] Starting up the Salt Minion
2018-10-10 21:30:32,393 [salt.utils.event :1017][INFO    ][2952] Starting pull socket on /var/run/salt/minion/minion_event_ac76da7de6_pull.ipc
2018-10-10 21:30:33,447 [salt.minion      :976 ][INFO    ][2952] Creating minion process manager
2018-10-10 21:30:35,168 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2952] Executing command ['date', '+%z'] in directory '/root'
2018-10-10 21:30:35,195 [salt.utils.schedule:568 ][INFO    ][2952] Updating job settings for scheduled job: __mine_interval
2018-10-10 21:30:35,206 [salt.minion      :1107][INFO    ][2952] Added mine.update to scheduler
2018-10-10 21:30:35,214 [salt.minion      :1965][INFO    ][2952] Minion is starting as user 'root'
2018-10-10 21:30:35,227 [salt.minion      :2324][INFO    ][2952] Minion is ready to receive requests!
2018-10-10 21:31:18,838 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.apply with jid 20181010213118824158
2018-10-10 21:31:18,867 [salt.minion      :1431][INFO    ][3041] Starting a new job with PID 3041
2018-10-10 21:31:24,832 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213124823045
2018-10-10 21:31:24,865 [salt.minion      :1431][INFO    ][3046] Starting a new job with PID 3046
2018-10-10 21:31:24,889 [salt.minion      :1708][INFO    ][3046] Returning information for job: 20181010213124823045
2018-10-10 21:31:26,628 [salt.state       :905 ][INFO    ][3041] Loading fresh modules for state activity
2018-10-10 21:31:29,007 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-10-10 21:31:29,062 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-10-10 21:31:29,221 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-10-10 21:31:29,351 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-10-10 21:31:29,479 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-10-10 21:31:29,718 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-10-10 21:31:29,863 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-10-10 21:31:29,988 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-10-10 21:31:30,169 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-10-10 21:31:30,201 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-10-10 21:31:30,338 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-10-10 21:31:30,476 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-10-10 21:31:30,624 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-10-10 21:31:30,786 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-10-10 21:31:30,925 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-10-10 21:31:32,024 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-10-10 21:31:32,156 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-10-10 21:31:32,292 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-10-10 21:31:32,425 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-10-10 21:31:32,558 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-10-10 21:31:32,694 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-10-10 21:31:32,895 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-10-10 21:31:33,157 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-10-10 21:31:33,286 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-10-10 21:31:33,422 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-10-10 21:31:33,454 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-10-10 21:31:33,518 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-10-10 21:31:33,588 [salt.state       :1770][INFO    ][3041] Running state [/etc/environment] at time 21:31:33.588700
2018-10-10 21:31:33,589 [salt.state       :1803][INFO    ][3041] Executing state file.blockreplace for [/etc/environment]
2018-10-10 21:31:33,599 [salt.state       :290 ][INFO    ][3041] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-10-10 21:31:33,599 [salt.state       :1941][INFO    ][3041] Completed state [/etc/environment] at time 21:31:33.599843 duration_in_ms=11.144
2018-10-10 21:31:33,600 [salt.state       :1770][INFO    ][3041] Running state [/etc/profile.d] at time 21:31:33.600708
2018-10-10 21:31:33,601 [salt.state       :1803][INFO    ][3041] Executing state file.directory for [/etc/profile.d]
2018-10-10 21:31:33,603 [salt.state       :290 ][INFO    ][3041] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-10-10 21:31:33,603 [salt.state       :1941][INFO    ][3041] Completed state [/etc/profile.d] at time 21:31:33.603351 duration_in_ms=2.643
2018-10-10 21:31:34,393 [salt.state       :1770][INFO    ][3041] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 21:31:34.393340
2018-10-10 21:31:34,393 [salt.state       :1803][INFO    ][3041] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-10-10 21:31:34,848 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-10-10 21:31:34,884 [salt.state       :290 ][INFO    ][3041] File changed:
New file
2018-10-10 21:31:34,884 [salt.state       :1941][INFO    ][3041] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 21:31:34.884483 duration_in_ms=491.143
2018-10-10 21:31:34,886 [salt.state       :1770][INFO    ][3041] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 21:31:34.886324
2018-10-10 21:31:34,887 [salt.state       :1803][INFO    ][3041] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-10-10 21:31:34,908 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213134894319
2018-10-10 21:31:34,927 [salt.state       :290 ][INFO    ][3041] File changed:
New file
2018-10-10 21:31:34,928 [salt.state       :1941][INFO    ][3041] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 21:31:34.928537 duration_in_ms=42.214
2018-10-10 21:31:34,930 [salt.state       :1770][INFO    ][3041] Running state [linux_repo_prereq_pkgs] at time 21:31:34.930609
2018-10-10 21:31:34,930 [salt.state       :1803][INFO    ][3041] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-10-10 21:31:34,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:31:34,941 [salt.minion      :1431][INFO    ][3117] Starting a new job with PID 3117
2018-10-10 21:31:34,970 [salt.minion      :1708][INFO    ][3117] Returning information for job: 20181010213134894319
2018-10-10 21:31:35,439 [salt.state       :290 ][INFO    ][3041] All specified packages are already installed
2018-10-10 21:31:35,439 [salt.state       :1941][INFO    ][3041] Completed state [linux_repo_prereq_pkgs] at time 21:31:35.439433 duration_in_ms=508.823
2018-10-10 21:31:35,439 [salt.state       :1770][INFO    ][3041] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 21:31:35.439864
2018-10-10 21:31:35,440 [salt.state       :1803][INFO    ][3041] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-10-10 21:31:35,441 [salt.state       :290 ][INFO    ][3041] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-10-10 21:31:35,441 [salt.state       :1941][INFO    ][3041] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 21:31:35.441920 duration_in_ms=2.055
2018-10-10 21:31:35,442 [salt.state       :1770][INFO    ][3041] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 21:31:35.442166
2018-10-10 21:31:35,442 [salt.state       :1803][INFO    ][3041] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-10-10 21:31:35,442 [salt.state       :290 ][INFO    ][3041] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-10-10 21:31:35,442 [salt.state       :1941][INFO    ][3041] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 21:31:35.442933 duration_in_ms=0.766
2018-10-10 21:31:35,443 [salt.state       :1770][INFO    ][3041] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 21:31:35.443195
2018-10-10 21:31:35,444 [salt.state       :1803][INFO    ][3041] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-10-10 21:31:35,461 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-10-10 21:31:35,579 [salt.state       :290 ][INFO    ][3041] File changed:
New file
2018-10-10 21:31:35,579 [salt.state       :1941][INFO    ][3041] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 21:31:35.579584 duration_in_ms=136.388
2018-10-10 21:31:35,583 [salt.state       :1770][INFO    ][3041] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 21:31:35.583362
2018-10-10 21:31:35,583 [salt.state       :1803][INFO    ][3041] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-10-10 21:31:35,889 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-10-10 21:31:36,316 [salt.state       :290 ][INFO    ][3041] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-10-10 21:31:36,316 [salt.state       :1941][INFO    ][3041] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 21:31:36.316633 duration_in_ms=733.271
2018-10-10 21:31:36,317 [salt.state       :1770][INFO    ][3041] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 21:31:36.317352
2018-10-10 21:31:36,318 [salt.state       :1803][INFO    ][3041] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-10-10 21:31:36,318 [salt.state       :290 ][INFO    ][3041] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-10-10 21:31:36,319 [salt.state       :1941][INFO    ][3041] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 21:31:36.319059 duration_in_ms=1.706
2018-10-10 21:31:36,319 [salt.state       :1770][INFO    ][3041] Running state [/etc/apt/preferences.d/uca] at time 21:31:36.319314
2018-10-10 21:31:36,319 [salt.state       :1803][INFO    ][3041] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-10-10 21:31:36,470 [salt.state       :290 ][INFO    ][3041] File changed:
New file
2018-10-10 21:31:36,471 [salt.state       :1941][INFO    ][3041] Completed state [/etc/apt/preferences.d/uca] at time 21:31:36.471270 duration_in_ms=151.956
2018-10-10 21:31:36,473 [salt.state       :1770][INFO    ][3041] Running state [echo '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' | base64 -d | apt-key add -] at time 21:31:36.473239
2018-10-10 21:31:36,474 [salt.state       :1803][INFO    ][3041] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-10-10 21:31:36,475 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-10-10 21:31:36,760 [salt.state       :290 ][INFO    ][3041] {'pid': 3255, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-10-10 21:31:36,761 [salt.state       :1941][INFO    ][3041] Completed state [echo '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' | base64 -d | apt-key add -] at time 21:31:36.761391 duration_in_ms=288.152
2018-10-10 21:31:36,766 [salt.state       :1770][INFO    ][3041] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 21:31:36.766748
2018-10-10 21:31:36,767 [salt.state       :1803][INFO    ][3041] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-10-10 21:31:36,904 [salt.state       :290 ][INFO    ][3041] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-10-10 21:31:36,904 [salt.state       :1941][INFO    ][3041] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 21:31:36.904607 duration_in_ms=137.859
2018-10-10 21:31:36,906 [salt.state       :1770][INFO    ][3041] Running state [pkg.refresh_db] at time 21:31:36.906856
2018-10-10 21:31:36,907 [salt.state       :1803][INFO    ][3041] Executing state module.run for [pkg.refresh_db]
2018-10-10 21:31:36,908 [salt.utils.decorators:613 ][WARNING ][3041] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-10 21:31:36,908 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-10 21:31:41,653 [salt.state       :290 ][INFO    ][3041] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-10-10 21:31:41,655 [salt.state       :1941][INFO    ][3041] Completed state [pkg.refresh_db] at time 21:31:41.655447 duration_in_ms=4748.589
2018-10-10 21:31:41,656 [salt.state       :1770][INFO    ][3041] Running state [linux_extra_packages_latest] at time 21:31:41.656212
2018-10-10 21:31:41,657 [salt.state       :1803][INFO    ][3041] Executing state pkg.latest for [linux_extra_packages_latest]
2018-10-10 21:31:41,681 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-10-10 21:31:41,901 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 21:31:41,935 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-10-10 21:31:45,037 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213145022013
2018-10-10 21:31:45,055 [salt.minion      :1431][INFO    ][3856] Starting a new job with PID 3856
2018-10-10 21:31:45,079 [salt.minion      :1708][INFO    ][3856] Returning information for job: 20181010213145022013
2018-10-10 21:31:45,892 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:31:45,957 [salt.state       :290 ][INFO    ][3041] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-10-10 21:31:45,987 [salt.state       :905 ][INFO    ][3041] Loading fresh modules for state activity
2018-10-10 21:31:46,047 [salt.state       :1941][INFO    ][3041] Completed state [linux_extra_packages_latest] at time 21:31:46.047241 duration_in_ms=4391.029
2018-10-10 21:31:46,053 [salt.state       :1770][INFO    ][3041] Running state [UTC] at time 21:31:46.053063
2018-10-10 21:31:46,053 [salt.state       :1803][INFO    ][3041] Executing state timezone.system for [UTC]
2018-10-10 21:31:46,057 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['timedatectl'] in directory '/root'
2018-10-10 21:31:46,171 [salt.state       :290 ][INFO    ][3041] Timezone UTC already set, UTC already set to UTC
2018-10-10 21:31:46,174 [salt.state       :1941][INFO    ][3041] Completed state [UTC] at time 21:31:46.174529 duration_in_ms=121.465
2018-10-10 21:31:46,179 [salt.state       :1770][INFO    ][3041] Running state [/etc/default/grub.d] at time 21:31:46.179270
2018-10-10 21:31:46,180 [salt.state       :1803][INFO    ][3041] Executing state file.directory for [/etc/default/grub.d]
2018-10-10 21:31:46,188 [salt.state       :290 ][INFO    ][3041] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-10-10 21:31:46,189 [salt.state       :1941][INFO    ][3041] Completed state [/etc/default/grub.d] at time 21:31:46.189378 duration_in_ms=10.109
2018-10-10 21:31:46,196 [salt.state       :1770][INFO    ][3041] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 21:31:46.196335
2018-10-10 21:31:46,196 [salt.state       :1803][INFO    ][3041] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2018-10-10 21:31:46,231 [salt.state       :290 ][INFO    ][3041] File changed:
New file
2018-10-10 21:31:46,232 [salt.state       :1941][INFO    ][3041] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 21:31:46.232404 duration_in_ms=36.068
2018-10-10 21:31:46,233 [salt.state       :1770][INFO    ][3041] Running state [update-grub] at time 21:31:46.233772
2018-10-10 21:31:46,234 [salt.state       :1803][INFO    ][3041] Executing state cmd.wait for [update-grub]
2018-10-10 21:31:46,235 [salt.state       :290 ][INFO    ][3041] No changes made for update-grub
2018-10-10 21:31:46,235 [salt.state       :1941][INFO    ][3041] Completed state [update-grub] at time 21:31:46.235830 duration_in_ms=2.058
2018-10-10 21:31:46,236 [salt.state       :1770][INFO    ][3041] Running state [update-grub] at time 21:31:46.236320
2018-10-10 21:31:46,238 [salt.state       :1803][INFO    ][3041] Executing state cmd.mod_watch for [update-grub]
2018-10-10 21:31:46,240 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'update-grub' in directory '/root'
2018-10-10 21:31:48,187 [salt.state       :290 ][INFO    ][3041] {'pid': 3902, 'retcode': 0, 'stderr': 'Generating grub configuration file ...\nFound linux image: /boot/vmlinuz-4.15.0-36-generic\nFound initrd image: /boot/initrd.img-4.15.0-36-generic\nFound linux image: /boot/vmlinuz-4.4.0-137-generic\nFound initrd image: /boot/initrd.img-4.4.0-137-generic\ndone', 'stdout': ''}
2018-10-10 21:31:48,190 [salt.state       :1941][INFO    ][3041] Completed state [update-grub] at time 21:31:48.190687 duration_in_ms=1954.367
2018-10-10 21:31:48,196 [salt.state       :1770][INFO    ][3041] Running state [nf_conntrack] at time 21:31:48.196828
2018-10-10 21:31:48,197 [salt.state       :1803][INFO    ][3041] Executing state kmod.present for [nf_conntrack]
2018-10-10 21:31:48,199 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'lsmod' in directory '/root'
2018-10-10 21:31:49,285 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'lsmod' in directory '/root'
2018-10-10 21:31:49,307 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-10-10 21:31:49,348 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'lsmod' in directory '/root'
2018-10-10 21:31:49,491 [salt.state       :290 ][INFO    ][3041] {'nf_conntrack': 'loaded'}
2018-10-10 21:31:49,491 [salt.state       :1941][INFO    ][3041] Completed state [nf_conntrack] at time 21:31:49.491617 duration_in_ms=1294.788
2018-10-10 21:31:49,498 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.tcp_keepalive_probes] at time 21:31:49.498132
2018-10-10 21:31:49,498 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-10-10 21:31:49,499 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-10-10 21:31:49,527 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.tcp_keepalive_probes': 8}
2018-10-10 21:31:49,528 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.tcp_keepalive_probes] at time 21:31:49.528629 duration_in_ms=30.497
2018-10-10 21:31:49,529 [salt.state       :1770][INFO    ][3041] Running state [fs.file-max] at time 21:31:49.529095
2018-10-10 21:31:49,529 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [fs.file-max]
2018-10-10 21:31:49,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-10-10 21:31:49,550 [salt.state       :290 ][INFO    ][3041] {'fs.file-max': 124165}
2018-10-10 21:31:49,551 [salt.state       :1941][INFO    ][3041] Completed state [fs.file-max] at time 21:31:49.551180 duration_in_ms=22.085
2018-10-10 21:31:49,551 [salt.state       :1770][INFO    ][3041] Running state [net.core.somaxconn] at time 21:31:49.551599
2018-10-10 21:31:49,551 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.core.somaxconn]
2018-10-10 21:31:49,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-10-10 21:31:49,650 [salt.state       :290 ][INFO    ][3041] {'net.core.somaxconn': 4096}
2018-10-10 21:31:49,651 [salt.state       :1941][INFO    ][3041] Completed state [net.core.somaxconn] at time 21:31:49.651384 duration_in_ms=99.784
2018-10-10 21:31:49,651 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.tcp_max_syn_backlog] at time 21:31:49.651824
2018-10-10 21:31:49,652 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-10-10 21:31:49,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-10-10 21:31:49,671 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-10-10 21:31:49,672 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.tcp_max_syn_backlog] at time 21:31:49.672252 duration_in_ms=20.427
2018-10-10 21:31:49,673 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.tcp_tw_reuse] at time 21:31:49.673268
2018-10-10 21:31:49,674 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-10-10 21:31:49,675 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-10-10 21:31:49,691 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.tcp_tw_reuse': 1}
2018-10-10 21:31:49,692 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.tcp_tw_reuse] at time 21:31:49.692481 duration_in_ms=19.213
2018-10-10 21:31:49,694 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.tcp_congestion_control] at time 21:31:49.694038
2018-10-10 21:31:49,694 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-10-10 21:31:49,695 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-10-10 21:31:49,726 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-10-10 21:31:49,726 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.tcp_congestion_control] at time 21:31:49.726663 duration_in_ms=32.625
2018-10-10 21:31:49,727 [salt.state       :1770][INFO    ][3041] Running state [net.nf_conntrack_max] at time 21:31:49.727092
2018-10-10 21:31:49,727 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.nf_conntrack_max]
2018-10-10 21:31:49,728 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-10-10 21:31:49,745 [salt.state       :290 ][INFO    ][3041] {'net.nf_conntrack_max': 1048576}
2018-10-10 21:31:49,746 [salt.state       :1941][INFO    ][3041] Completed state [net.nf_conntrack_max] at time 21:31:49.745989 duration_in_ms=18.897
2018-10-10 21:31:49,746 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.tcp_retries2] at time 21:31:49.746688
2018-10-10 21:31:49,747 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-10-10 21:31:49,748 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-10-10 21:31:49,763 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.tcp_retries2': 5}
2018-10-10 21:31:49,767 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.tcp_retries2] at time 21:31:49.767106 duration_in_ms=20.418
2018-10-10 21:31:49,767 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.tcp_fin_timeout] at time 21:31:49.767809
2018-10-10 21:31:49,768 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-10-10 21:31:49,769 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-10-10 21:31:49,786 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.tcp_fin_timeout': 30}
2018-10-10 21:31:49,787 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.tcp_fin_timeout] at time 21:31:49.787041 duration_in_ms=19.232
2018-10-10 21:31:49,787 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.tcp_slow_start_after_idle] at time 21:31:49.787749
2018-10-10 21:31:49,788 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-10-10 21:31:49,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-10-10 21:31:49,803 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-10-10 21:31:49,803 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 21:31:49.803875 duration_in_ms=16.126
2018-10-10 21:31:49,804 [salt.state       :1770][INFO    ][3041] Running state [vm.swappiness] at time 21:31:49.804602
2018-10-10 21:31:49,805 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [vm.swappiness]
2018-10-10 21:31:49,806 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-10-10 21:31:49,819 [salt.state       :290 ][INFO    ][3041] {'vm.swappiness': 10}
2018-10-10 21:31:49,820 [salt.state       :1941][INFO    ][3041] Completed state [vm.swappiness] at time 21:31:49.820667 duration_in_ms=16.064
2018-10-10 21:31:49,821 [salt.state       :1770][INFO    ][3041] Running state [net.core.netdev_max_backlog] at time 21:31:49.821110
2018-10-10 21:31:49,821 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-10-10 21:31:49,823 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-10-10 21:31:49,840 [salt.state       :290 ][INFO    ][3041] {'net.core.netdev_max_backlog': 261144}
2018-10-10 21:31:49,841 [salt.state       :1941][INFO    ][3041] Completed state [net.core.netdev_max_backlog] at time 21:31:49.841236 duration_in_ms=20.125
2018-10-10 21:31:49,841 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.neigh.default.gc_thresh1] at time 21:31:49.841946
2018-10-10 21:31:49,842 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-10-10 21:31:49,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-10-10 21:31:49,860 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-10-10 21:31:49,862 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 21:31:49.862099 duration_in_ms=20.152
2018-10-10 21:31:49,862 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.neigh.default.gc_thresh2] at time 21:31:49.862532
2018-10-10 21:31:49,863 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-10-10 21:31:49,864 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-10-10 21:31:49,884 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-10-10 21:31:49,886 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 21:31:49.885230 duration_in_ms=22.697
2018-10-10 21:31:49,886 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.neigh.default.gc_thresh3] at time 21:31:49.886496
2018-10-10 21:31:49,887 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-10-10 21:31:49,888 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-10-10 21:31:49,906 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-10-10 21:31:49,906 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 21:31:49.906516 duration_in_ms=20.02
2018-10-10 21:31:49,906 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.tcp_keepalive_intvl] at time 21:31:49.906928
2018-10-10 21:31:49,907 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-10-10 21:31:49,908 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-10-10 21:31:49,927 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-10-10 21:31:49,927 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.tcp_keepalive_intvl] at time 21:31:49.927779 duration_in_ms=20.849
2018-10-10 21:31:49,928 [salt.state       :1770][INFO    ][3041] Running state [net.ipv4.tcp_keepalive_time] at time 21:31:49.928509
2018-10-10 21:31:49,929 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-10-10 21:31:49,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-10-10 21:31:49,949 [salt.state       :290 ][INFO    ][3041] {'net.ipv4.tcp_keepalive_time': 30}
2018-10-10 21:31:49,950 [salt.state       :1941][INFO    ][3041] Completed state [net.ipv4.tcp_keepalive_time] at time 21:31:49.950383 duration_in_ms=21.873
2018-10-10 21:31:49,950 [salt.state       :1770][INFO    ][3041] Running state [kernel.panic] at time 21:31:49.950802
2018-10-10 21:31:49,951 [salt.state       :1803][INFO    ][3041] Executing state sysctl.present for [kernel.panic]
2018-10-10 21:31:49,952 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-10-10 21:31:49,967 [salt.state       :290 ][INFO    ][3041] {'kernel.panic': 60}
2018-10-10 21:31:49,968 [salt.state       :1941][INFO    ][3041] Completed state [kernel.panic] at time 21:31:49.968065 duration_in_ms=17.262
2018-10-10 21:31:49,976 [salt.state       :1770][INFO    ][3041] Running state [linux_sysfs_package] at time 21:31:49.976668
2018-10-10 21:31:49,977 [salt.state       :1803][INFO    ][3041] Executing state pkg.installed for [linux_sysfs_package]
2018-10-10 21:31:50,905 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-10-10 21:31:51,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-10 21:31:53,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 21:31:53,430 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-10-10 21:31:55,066 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213155054044
2018-10-10 21:31:55,089 [salt.minion      :1431][INFO    ][4783] Starting a new job with PID 4783
2018-10-10 21:31:55,113 [salt.minion      :1708][INFO    ][4783] Returning information for job: 20181010213155054044
2018-10-10 21:31:58,517 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:31:58,568 [salt.state       :290 ][INFO    ][3041] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-10-10 21:31:58,595 [salt.state       :905 ][INFO    ][3041] Loading fresh modules for state activity
2018-10-10 21:31:58,663 [salt.state       :1941][INFO    ][3041] Completed state [linux_sysfs_package] at time 21:31:58.663806 duration_in_ms=8687.137
2018-10-10 21:31:58,670 [salt.state       :1770][INFO    ][3041] Running state [/etc/sysfs.d] at time 21:31:58.670602
2018-10-10 21:31:58,670 [salt.state       :1803][INFO    ][3041] Executing state file.directory for [/etc/sysfs.d]
2018-10-10 21:31:58,676 [salt.state       :290 ][INFO    ][3041] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-10-10 21:31:58,677 [salt.state       :1941][INFO    ][3041] Completed state [/etc/sysfs.d] at time 21:31:58.676904 duration_in_ms=6.302
2018-10-10 21:31:59,348 [salt.state       :1770][INFO    ][3041] Running state [ondemand] at time 21:31:59.348459
2018-10-10 21:31:59,349 [salt.state       :1803][INFO    ][3041] Executing state service.dead for [ondemand]
2018-10-10 21:31:59,351 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-10-10 21:31:59,372 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-10 21:31:59,390 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-10 21:31:59,411 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-10-10 21:31:59,489 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-10 21:31:59,509 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-10 21:31:59,533 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-10 21:31:59,559 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-10-10 21:31:59,814 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-10 21:31:59,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'runlevel' in directory '/root'
2018-10-10 21:31:59,864 [salt.state       :290 ][INFO    ][3041] {'ondemand': True}
2018-10-10 21:31:59,865 [salt.state       :1941][INFO    ][3041] Completed state [ondemand] at time 21:31:59.865001 duration_in_ms=516.543
2018-10-10 21:31:59,866 [salt.state       :1770][INFO    ][3041] Running state [en_US.UTF-8] at time 21:31:59.866666
2018-10-10 21:31:59,867 [salt.state       :1803][INFO    ][3041] Executing state locale.present for [en_US.UTF-8]
2018-10-10 21:31:59,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'locale -a' in directory '/root'
2018-10-10 21:31:59,884 [salt.state       :290 ][INFO    ][3041] Locale en_US.UTF-8 is already present
2018-10-10 21:31:59,885 [salt.state       :1941][INFO    ][3041] Completed state [en_US.UTF-8] at time 21:31:59.885326 duration_in_ms=18.66
2018-10-10 21:31:59,888 [salt.state       :1770][INFO    ][3041] Running state [en_US.UTF-8] at time 21:31:59.888876
2018-10-10 21:31:59,889 [salt.state       :1803][INFO    ][3041] Executing state locale.system for [en_US.UTF-8]
2018-10-10 21:31:59,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'localectl' in directory '/root'
2018-10-10 21:32:00,046 [salt.state       :290 ][INFO    ][3041] System locale en_US.UTF-8 already set
2018-10-10 21:32:00,047 [salt.state       :1941][INFO    ][3041] Completed state [en_US.UTF-8] at time 21:32:00.047088 duration_in_ms=158.212
2018-10-10 21:32:00,050 [salt.state       :1770][INFO    ][3041] Running state [root] at time 21:32:00.049989
2018-10-10 21:32:00,050 [salt.state       :1803][INFO    ][3041] Executing state group.present for [root]
2018-10-10 21:32:00,051 [salt.state       :290 ][INFO    ][3041] Group root is present and up to date
2018-10-10 21:32:00,051 [salt.state       :1941][INFO    ][3041] Completed state [root] at time 21:32:00.051841 duration_in_ms=1.852
2018-10-10 21:32:00,055 [salt.state       :1770][INFO    ][3041] Running state [root] at time 21:32:00.055377
2018-10-10 21:32:00,055 [salt.state       :1803][INFO    ][3041] Executing state user.present for [root]
2018-10-10 21:32:00,063 [salt.state       :290 ][INFO    ][3041] User root is present and up to date
2018-10-10 21:32:00,064 [salt.state       :1941][INFO    ][3041] Completed state [root] at time 21:32:00.064132 duration_in_ms=8.755
2018-10-10 21:32:00,065 [salt.state       :1770][INFO    ][3041] Running state [/root] at time 21:32:00.065922
2018-10-10 21:32:00,066 [salt.state       :1803][INFO    ][3041] Executing state file.directory for [/root]
2018-10-10 21:32:00,067 [salt.state       :290 ][INFO    ][3041] Directory /root is in the correct state
Directory /root updated
2018-10-10 21:32:00,067 [salt.state       :1941][INFO    ][3041] Completed state [/root] at time 21:32:00.067307 duration_in_ms=1.385
2018-10-10 21:32:00,067 [salt.state       :1770][INFO    ][3041] Running state [/etc/sudoers.d/90-salt-user-root] at time 21:32:00.067554
2018-10-10 21:32:00,067 [salt.state       :1803][INFO    ][3041] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-10-10 21:32:00,069 [salt.state       :290 ][INFO    ][3041] File /etc/sudoers.d/90-salt-user-root is not present
2018-10-10 21:32:00,069 [salt.state       :1941][INFO    ][3041] Completed state [/etc/sudoers.d/90-salt-user-root] at time 21:32:00.069472 duration_in_ms=1.918
2018-10-10 21:32:00,069 [salt.state       :1770][INFO    ][3041] Running state [ubuntu] at time 21:32:00.069703
2018-10-10 21:32:00,069 [salt.state       :1803][INFO    ][3041] Executing state group.present for [ubuntu]
2018-10-10 21:32:00,070 [salt.state       :290 ][INFO    ][3041] Group ubuntu is present and up to date
2018-10-10 21:32:00,070 [salt.state       :1941][INFO    ][3041] Completed state [ubuntu] at time 21:32:00.070478 duration_in_ms=0.775
2018-10-10 21:32:00,071 [salt.state       :1770][INFO    ][3041] Running state [ubuntu] at time 21:32:00.071701
2018-10-10 21:32:00,071 [salt.state       :1803][INFO    ][3041] Executing state user.present for [ubuntu]
2018-10-10 21:32:00,076 [salt.state       :290 ][INFO    ][3041] {'passwd': 'XXX-REDACTED-XXX'}
2018-10-10 21:32:00,076 [salt.state       :1941][INFO    ][3041] Completed state [ubuntu] at time 21:32:00.076621 duration_in_ms=4.92
2018-10-10 21:32:00,077 [salt.state       :1770][INFO    ][3041] Running state [/home/ubuntu] at time 21:32:00.077756
2018-10-10 21:32:00,078 [salt.state       :1803][INFO    ][3041] Executing state file.directory for [/home/ubuntu]
2018-10-10 21:32:00,079 [salt.state       :290 ][INFO    ][3041] {'mode': '0700'}
2018-10-10 21:32:00,079 [salt.state       :1941][INFO    ][3041] Completed state [/home/ubuntu] at time 21:32:00.079857 duration_in_ms=2.101
2018-10-10 21:32:00,082 [salt.state       :1770][INFO    ][3041] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 21:32:00.082033
2018-10-10 21:32:00,082 [salt.state       :1803][INFO    ][3041] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-10-10 21:32:00,102 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-10-10 21:32:00,116 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.A8OIeK' in directory '/root'
2018-10-10 21:32:00,148 [salt.state       :290 ][INFO    ][3041] File changed:
New file
2018-10-10 21:32:00,148 [salt.state       :1941][INFO    ][3041] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 21:32:00.148894 duration_in_ms=66.861
2018-10-10 21:32:00,149 [salt.state       :1770][INFO    ][3041] Running state [/etc/security/limits.d/90-salt-default.conf] at time 21:32:00.149274
2018-10-10 21:32:00,149 [salt.state       :1803][INFO    ][3041] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-10-10 21:32:00,168 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-10-10 21:32:00,303 [salt.state       :290 ][INFO    ][3041] File changed:
New file
2018-10-10 21:32:00,303 [salt.state       :1941][INFO    ][3041] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 21:32:00.303909 duration_in_ms=154.635
2018-10-10 21:32:00,305 [salt.state       :1770][INFO    ][3041] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 21:32:00.304494
2018-10-10 21:32:00,305 [salt.state       :1803][INFO    ][3041] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-10-10 21:32:00,321 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-10-10 21:32:00,444 [salt.state       :290 ][INFO    ][3041] File changed:
New file
2018-10-10 21:32:00,445 [salt.state       :1941][INFO    ][3041] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 21:32:00.445376 duration_in_ms=140.88
2018-10-10 21:32:00,447 [salt.state       :1770][INFO    ][3041] Running state [service.systemctl_reload] at time 21:32:00.447816
2018-10-10 21:32:00,448 [salt.state       :1803][INFO    ][3041] Executing state module.wait for [service.systemctl_reload]
2018-10-10 21:32:00,448 [salt.state       :290 ][INFO    ][3041] No changes made for service.systemctl_reload
2018-10-10 21:32:00,448 [salt.state       :1941][INFO    ][3041] Completed state [service.systemctl_reload] at time 21:32:00.448938 duration_in_ms=1.122
2018-10-10 21:32:00,449 [salt.state       :1770][INFO    ][3041] Running state [service.systemctl_reload] at time 21:32:00.449143
2018-10-10 21:32:00,449 [salt.state       :1803][INFO    ][3041] Executing state module.mod_watch for [service.systemctl_reload]
2018-10-10 21:32:00,449 [salt.utils.decorators:613 ][WARNING ][3041] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-10 21:32:00,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-10-10 21:32:00,596 [salt.state       :290 ][INFO    ][3041] {'ret': True}
2018-10-10 21:32:00,597 [salt.state       :1941][INFO    ][3041] Completed state [service.systemctl_reload] at time 21:32:00.597511 duration_in_ms=148.367
2018-10-10 21:32:00,598 [salt.state       :1770][INFO    ][3041] Running state [/etc/issue] at time 21:32:00.598013
2018-10-10 21:32:00,598 [salt.state       :1803][INFO    ][3041] Executing state file.managed for [/etc/issue]
2018-10-10 21:32:00,604 [salt.state       :290 ][INFO    ][3041] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-10-10 21:32:00,604 [salt.state       :1941][INFO    ][3041] Completed state [/etc/issue] at time 21:32:00.604385 duration_in_ms=6.372
2018-10-10 21:32:00,605 [salt.state       :1770][INFO    ][3041] Running state [/etc/hostname] at time 21:32:00.605241
2018-10-10 21:32:00,605 [salt.state       :1803][INFO    ][3041] Executing state file.managed for [/etc/hostname]
2018-10-10 21:32:00,622 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-10-10 21:32:00,638 [salt.state       :290 ][INFO    ][3041] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb03

2018-10-10 21:32:00,638 [salt.state       :1941][INFO    ][3041] Completed state [/etc/hostname] at time 21:32:00.638326 duration_in_ms=33.085
2018-10-10 21:32:00,641 [salt.state       :1770][INFO    ][3041] Running state [hostname mdb03] at time 21:32:00.641557
2018-10-10 21:32:00,642 [salt.state       :1803][INFO    ][3041] Executing state cmd.run for [hostname mdb03]
2018-10-10 21:32:00,643 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'test "$(hostname)" = "mdb03"' in directory '/root'
2018-10-10 21:32:00,666 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command 'hostname mdb03' in directory '/root'
2018-10-10 21:32:00,684 [salt.state       :290 ][INFO    ][3041] {'pid': 5306, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-10 21:32:00,685 [salt.state       :1941][INFO    ][3041] Completed state [hostname mdb03] at time 21:32:00.685540 duration_in_ms=43.983
2018-10-10 21:32:00,687 [salt.state       :1770][INFO    ][3041] Running state [mdb02] at time 21:32:00.686982
2018-10-10 21:32:00,687 [salt.state       :1803][INFO    ][3041] Executing state host.present for [mdb02]
2018-10-10 21:32:00,690 [salt.state       :290 ][INFO    ][3041] {'host': 'mdb02'}
2018-10-10 21:32:00,691 [salt.state       :1941][INFO    ][3041] Completed state [mdb02] at time 21:32:00.691344 duration_in_ms=4.362
2018-10-10 21:32:00,691 [salt.state       :1770][INFO    ][3041] Running state [mdb02.mcp-ovs-ha.local] at time 21:32:00.691707
2018-10-10 21:32:00,691 [salt.state       :1803][INFO    ][3041] Executing state host.present for [mdb02.mcp-ovs-ha.local]
2018-10-10 21:32:00,693 [salt.state       :290 ][INFO    ][3041] {'host': 'mdb02.mcp-ovs-ha.local'}
2018-10-10 21:32:00,693 [salt.state       :1941][INFO    ][3041] Completed state [mdb02.mcp-ovs-ha.local] at time 21:32:00.693769 duration_in_ms=2.062
2018-10-10 21:32:00,694 [salt.state       :1770][INFO    ][3041] Running state [mdb03] at time 21:32:00.694096
2018-10-10 21:32:00,694 [salt.state       :1803][INFO    ][3041] Executing state host.present for [mdb03]
2018-10-10 21:32:00,695 [salt.state       :290 ][INFO    ][3041] {'host': 'mdb03'}
2018-10-10 21:32:00,695 [salt.state       :1941][INFO    ][3041] Completed state [mdb03] at time 21:32:00.695463 duration_in_ms=1.367
2018-10-10 21:32:00,695 [salt.state       :1770][INFO    ][3041] Running state [mdb03.mcp-ovs-ha.local] at time 21:32:00.695765
2018-10-10 21:32:00,696 [salt.state       :1803][INFO    ][3041] Executing state host.present for [mdb03.mcp-ovs-ha.local]
2018-10-10 21:32:00,699 [salt.state       :290 ][INFO    ][3041] {'host': 'mdb03.mcp-ovs-ha.local'}
2018-10-10 21:32:00,699 [salt.state       :1941][INFO    ][3041] Completed state [mdb03.mcp-ovs-ha.local] at time 21:32:00.699703 duration_in_ms=3.938
2018-10-10 21:32:00,700 [salt.state       :1770][INFO    ][3041] Running state [mdb01] at time 21:32:00.700007
2018-10-10 21:32:00,700 [salt.state       :1803][INFO    ][3041] Executing state host.present for [mdb01]
2018-10-10 21:32:00,701 [salt.state       :290 ][INFO    ][3041] {'host': 'mdb01'}
2018-10-10 21:32:00,701 [salt.state       :1941][INFO    ][3041] Completed state [mdb01] at time 21:32:00.701730 duration_in_ms=1.724
2018-10-10 21:32:00,702 [salt.state       :1770][INFO    ][3041] Running state [mdb01.mcp-ovs-ha.local] at time 21:32:00.702036
2018-10-10 21:32:00,702 [salt.state       :1803][INFO    ][3041] Executing state host.present for [mdb01.mcp-ovs-ha.local]
2018-10-10 21:32:00,703 [salt.state       :290 ][INFO    ][3041] {'host': 'mdb01.mcp-ovs-ha.local'}
2018-10-10 21:32:00,703 [salt.state       :1941][INFO    ][3041] Completed state [mdb01.mcp-ovs-ha.local] at time 21:32:00.703422 duration_in_ms=1.387
2018-10-10 21:32:00,703 [salt.state       :1770][INFO    ][3041] Running state [mdb] at time 21:32:00.703726
2018-10-10 21:32:00,704 [salt.state       :1803][INFO    ][3041] Executing state host.present for [mdb]
2018-10-10 21:32:00,707 [salt.state       :290 ][INFO    ][3041] {'host': 'mdb'}
2018-10-10 21:32:00,707 [salt.state       :1941][INFO    ][3041] Completed state [mdb] at time 21:32:00.707565 duration_in_ms=3.839
2018-10-10 21:32:00,707 [salt.state       :1770][INFO    ][3041] Running state [mdb.mcp-ovs-ha.local] at time 21:32:00.707893
2018-10-10 21:32:00,709 [salt.state       :1803][INFO    ][3041] Executing state host.present for [mdb.mcp-ovs-ha.local]
2018-10-10 21:32:00,710 [salt.state       :290 ][INFO    ][3041] {'host': 'mdb.mcp-ovs-ha.local'}
2018-10-10 21:32:00,710 [salt.state       :1941][INFO    ][3041] Completed state [mdb.mcp-ovs-ha.local] at time 21:32:00.710744 duration_in_ms=2.851
2018-10-10 21:32:00,711 [salt.state       :1770][INFO    ][3041] Running state [cfg01] at time 21:32:00.711053
2018-10-10 21:32:00,711 [salt.state       :1803][INFO    ][3041] Executing state host.present for [cfg01]
2018-10-10 21:32:00,718 [salt.state       :290 ][INFO    ][3041] {'host': 'cfg01'}
2018-10-10 21:32:00,719 [salt.state       :1941][INFO    ][3041] Completed state [cfg01] at time 21:32:00.719148 duration_in_ms=8.095
2018-10-10 21:32:00,719 [salt.state       :1770][INFO    ][3041] Running state [cfg01.mcp-ovs-ha.local] at time 21:32:00.719468
2018-10-10 21:32:00,719 [salt.state       :1803][INFO    ][3041] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-10 21:32:00,721 [salt.state       :290 ][INFO    ][3041] {'host': 'cfg01.mcp-ovs-ha.local'}
2018-10-10 21:32:00,721 [salt.state       :1941][INFO    ][3041] Completed state [cfg01.mcp-ovs-ha.local] at time 21:32:00.721265 duration_in_ms=1.797
2018-10-10 21:32:00,721 [salt.state       :1770][INFO    ][3041] Running state [prx01] at time 21:32:00.721579
2018-10-10 21:32:00,722 [salt.state       :1803][INFO    ][3041] Executing state host.present for [prx01]
2018-10-10 21:32:00,723 [salt.state       :290 ][INFO    ][3041] {'host': 'prx01'}
2018-10-10 21:32:00,723 [salt.state       :1941][INFO    ][3041] Completed state [prx01] at time 21:32:00.723315 duration_in_ms=1.736
2018-10-10 21:32:00,723 [salt.state       :1770][INFO    ][3041] Running state [prx01.mcp-ovs-ha.local] at time 21:32:00.723627
2018-10-10 21:32:00,723 [salt.state       :1803][INFO    ][3041] Executing state host.present for [prx01.mcp-ovs-ha.local]
2018-10-10 21:32:00,725 [salt.state       :290 ][INFO    ][3041] {'host': 'prx01.mcp-ovs-ha.local'}
2018-10-10 21:32:00,725 [salt.state       :1941][INFO    ][3041] Completed state [prx01.mcp-ovs-ha.local] at time 21:32:00.725397 duration_in_ms=1.77
2018-10-10 21:32:00,725 [salt.state       :1770][INFO    ][3041] Running state [kvm01] at time 21:32:00.725707
2018-10-10 21:32:00,725 [salt.state       :1803][INFO    ][3041] Executing state host.present for [kvm01]
2018-10-10 21:32:00,726 [salt.state       :290 ][INFO    ][3041] {'host': 'kvm01'}
2018-10-10 21:32:00,727 [salt.state       :1941][INFO    ][3041] Completed state [kvm01] at time 21:32:00.727133 duration_in_ms=1.426
2018-10-10 21:32:00,727 [salt.state       :1770][INFO    ][3041] Running state [kvm01.mcp-ovs-ha.local] at time 21:32:00.727443
2018-10-10 21:32:00,727 [salt.state       :1803][INFO    ][3041] Executing state host.present for [kvm01.mcp-ovs-ha.local]
2018-10-10 21:32:00,730 [salt.state       :290 ][INFO    ][3041] {'host': 'kvm01.mcp-ovs-ha.local'}
2018-10-10 21:32:00,730 [salt.state       :1941][INFO    ][3041] Completed state [kvm01.mcp-ovs-ha.local] at time 21:32:00.730590 duration_in_ms=3.147
2018-10-10 21:32:00,730 [salt.state       :1770][INFO    ][3041] Running state [kvm03] at time 21:32:00.730913
2018-10-10 21:32:00,731 [salt.state       :1803][INFO    ][3041] Executing state host.present for [kvm03]
2018-10-10 21:32:00,732 [salt.state       :290 ][INFO    ][3041] {'host': 'kvm03'}
2018-10-10 21:32:00,732 [salt.state       :1941][INFO    ][3041] Completed state [kvm03] at time 21:32:00.732376 duration_in_ms=1.463
2018-10-10 21:32:00,732 [salt.state       :1770][INFO    ][3041] Running state [kvm03.mcp-ovs-ha.local] at time 21:32:00.732705
2018-10-10 21:32:00,732 [salt.state       :1803][INFO    ][3041] Executing state host.present for [kvm03.mcp-ovs-ha.local]
2018-10-10 21:32:00,733 [salt.state       :290 ][INFO    ][3041] {'host': 'kvm03.mcp-ovs-ha.local'}
2018-10-10 21:32:00,734 [salt.state       :1941][INFO    ][3041] Completed state [kvm03.mcp-ovs-ha.local] at time 21:32:00.734144 duration_in_ms=1.44
2018-10-10 21:32:00,734 [salt.state       :1770][INFO    ][3041] Running state [kvm02] at time 21:32:00.734467
2018-10-10 21:32:00,734 [salt.state       :1803][INFO    ][3041] Executing state host.present for [kvm02]
2018-10-10 21:32:00,735 [salt.state       :290 ][INFO    ][3041] {'host': 'kvm02'}
2018-10-10 21:32:00,735 [salt.state       :1941][INFO    ][3041] Completed state [kvm02] at time 21:32:00.735910 duration_in_ms=1.443
2018-10-10 21:32:00,737 [salt.state       :1770][INFO    ][3041] Running state [kvm02.mcp-ovs-ha.local] at time 21:32:00.737160
2018-10-10 21:32:00,737 [salt.state       :1803][INFO    ][3041] Executing state host.present for [kvm02.mcp-ovs-ha.local]
2018-10-10 21:32:00,738 [salt.state       :290 ][INFO    ][3041] {'host': 'kvm02.mcp-ovs-ha.local'}
2018-10-10 21:32:00,738 [salt.state       :1941][INFO    ][3041] Completed state [kvm02.mcp-ovs-ha.local] at time 21:32:00.738657 duration_in_ms=1.497
2018-10-10 21:32:00,739 [salt.state       :1770][INFO    ][3041] Running state [dbs] at time 21:32:00.738973
2018-10-10 21:32:00,739 [salt.state       :1803][INFO    ][3041] Executing state host.present for [dbs]
2018-10-10 21:32:00,741 [salt.state       :290 ][INFO    ][3041] {'host': 'dbs'}
2018-10-10 21:32:00,741 [salt.state       :1941][INFO    ][3041] Completed state [dbs] at time 21:32:00.741696 duration_in_ms=2.723
2018-10-10 21:32:00,742 [salt.state       :1770][INFO    ][3041] Running state [dbs.mcp-ovs-ha.local] at time 21:32:00.742027
2018-10-10 21:32:00,742 [salt.state       :1803][INFO    ][3041] Executing state host.present for [dbs.mcp-ovs-ha.local]
2018-10-10 21:32:00,743 [salt.state       :290 ][INFO    ][3041] {'host': 'dbs.mcp-ovs-ha.local'}
2018-10-10 21:32:00,743 [salt.state       :1941][INFO    ][3041] Completed state [dbs.mcp-ovs-ha.local] at time 21:32:00.743807 duration_in_ms=1.78
2018-10-10 21:32:00,744 [salt.state       :1770][INFO    ][3041] Running state [prx] at time 21:32:00.744166
2018-10-10 21:32:00,744 [salt.state       :1803][INFO    ][3041] Executing state host.present for [prx]
2018-10-10 21:32:00,746 [salt.state       :290 ][INFO    ][3041] {'host': 'prx'}
2018-10-10 21:32:00,746 [salt.state       :1941][INFO    ][3041] Completed state [prx] at time 21:32:00.746580 duration_in_ms=2.414
2018-10-10 21:32:00,746 [salt.state       :1770][INFO    ][3041] Running state [prx.mcp-ovs-ha.local] at time 21:32:00.746903
2018-10-10 21:32:00,747 [salt.state       :1803][INFO    ][3041] Executing state host.present for [prx.mcp-ovs-ha.local]
2018-10-10 21:32:00,748 [salt.state       :290 ][INFO    ][3041] {'host': 'prx.mcp-ovs-ha.local'}
2018-10-10 21:32:00,749 [salt.state       :1941][INFO    ][3041] Completed state [prx.mcp-ovs-ha.local] at time 21:32:00.749127 duration_in_ms=2.224
2018-10-10 21:32:00,749 [salt.state       :1770][INFO    ][3041] Running state [prx02] at time 21:32:00.749449
2018-10-10 21:32:00,750 [salt.state       :1803][INFO    ][3041] Executing state host.present for [prx02]
2018-10-10 21:32:00,751 [salt.state       :290 ][INFO    ][3041] {'host': 'prx02'}
2018-10-10 21:32:00,751 [salt.state       :1941][INFO    ][3041] Completed state [prx02] at time 21:32:00.751506 duration_in_ms=2.057
2018-10-10 21:32:00,751 [salt.state       :1770][INFO    ][3041] Running state [prx02.mcp-ovs-ha.local] at time 21:32:00.751832
2018-10-10 21:32:00,752 [salt.state       :1803][INFO    ][3041] Executing state host.present for [prx02.mcp-ovs-ha.local]
2018-10-10 21:32:00,771 [salt.state       :290 ][INFO    ][3041] {'host': 'prx02.mcp-ovs-ha.local'}
2018-10-10 21:32:00,771 [salt.state       :1941][INFO    ][3041] Completed state [prx02.mcp-ovs-ha.local] at time 21:32:00.771304 duration_in_ms=19.472
2018-10-10 21:32:00,771 [salt.state       :1770][INFO    ][3041] Running state [msg02] at time 21:32:00.771648
2018-10-10 21:32:00,771 [salt.state       :1803][INFO    ][3041] Executing state host.present for [msg02]
2018-10-10 21:32:00,773 [salt.state       :290 ][INFO    ][3041] {'host': 'msg02'}
2018-10-10 21:32:00,773 [salt.state       :1941][INFO    ][3041] Completed state [msg02] at time 21:32:00.773827 duration_in_ms=2.179
2018-10-10 21:32:00,774 [salt.state       :1770][INFO    ][3041] Running state [msg02.mcp-ovs-ha.local] at time 21:32:00.774152
2018-10-10 21:32:00,774 [salt.state       :1803][INFO    ][3041] Executing state host.present for [msg02.mcp-ovs-ha.local]
2018-10-10 21:32:00,775 [salt.state       :290 ][INFO    ][3041] {'host': 'msg02.mcp-ovs-ha.local'}
2018-10-10 21:32:00,775 [salt.state       :1941][INFO    ][3041] Completed state [msg02.mcp-ovs-ha.local] at time 21:32:00.775676 duration_in_ms=1.524
2018-10-10 21:32:00,776 [salt.state       :1770][INFO    ][3041] Running state [msg03] at time 21:32:00.776004
2018-10-10 21:32:00,777 [salt.state       :1803][INFO    ][3041] Executing state host.present for [msg03]
2018-10-10 21:32:00,778 [salt.state       :290 ][INFO    ][3041] {'host': 'msg03'}
2018-10-10 21:32:00,778 [salt.state       :1941][INFO    ][3041] Completed state [msg03] at time 21:32:00.778752 duration_in_ms=2.748
2018-10-10 21:32:00,779 [salt.state       :1770][INFO    ][3041] Running state [msg03.mcp-ovs-ha.local] at time 21:32:00.779085
2018-10-10 21:32:00,779 [salt.state       :1803][INFO    ][3041] Executing state host.present for [msg03.mcp-ovs-ha.local]
2018-10-10 21:32:00,780 [salt.state       :290 ][INFO    ][3041] {'host': 'msg03.mcp-ovs-ha.local'}
2018-10-10 21:32:00,781 [salt.state       :1941][INFO    ][3041] Completed state [msg03.mcp-ovs-ha.local] at time 21:32:00.780964 duration_in_ms=1.878
2018-10-10 21:32:00,781 [salt.state       :1770][INFO    ][3041] Running state [msg01] at time 21:32:00.781290
2018-10-10 21:32:00,781 [salt.state       :1803][INFO    ][3041] Executing state host.present for [msg01]
2018-10-10 21:32:00,782 [salt.state       :290 ][INFO    ][3041] {'host': 'msg01'}
2018-10-10 21:32:00,783 [salt.state       :1941][INFO    ][3041] Completed state [msg01] at time 21:32:00.783117 duration_in_ms=1.826
2018-10-10 21:32:00,783 [salt.state       :1770][INFO    ][3041] Running state [msg01.mcp-ovs-ha.local] at time 21:32:00.783458
2018-10-10 21:32:00,783 [salt.state       :1803][INFO    ][3041] Executing state host.present for [msg01.mcp-ovs-ha.local]
2018-10-10 21:32:00,786 [salt.state       :290 ][INFO    ][3041] {'host': 'msg01.mcp-ovs-ha.local'}
2018-10-10 21:32:00,786 [salt.state       :1941][INFO    ][3041] Completed state [msg01.mcp-ovs-ha.local] at time 21:32:00.786230 duration_in_ms=2.772
2018-10-10 21:32:00,786 [salt.state       :1770][INFO    ][3041] Running state [msg] at time 21:32:00.786575
2018-10-10 21:32:00,787 [salt.state       :1803][INFO    ][3041] Executing state host.present for [msg]
2018-10-10 21:32:00,788 [salt.state       :290 ][INFO    ][3041] {'host': 'msg'}
2018-10-10 21:32:00,789 [salt.state       :1941][INFO    ][3041] Completed state [msg] at time 21:32:00.789002 duration_in_ms=2.427
2018-10-10 21:32:00,789 [salt.state       :1770][INFO    ][3041] Running state [msg.mcp-ovs-ha.local] at time 21:32:00.789337
2018-10-10 21:32:00,789 [salt.state       :1803][INFO    ][3041] Executing state host.present for [msg.mcp-ovs-ha.local]
2018-10-10 21:32:00,791 [salt.state       :290 ][INFO    ][3041] {'host': 'msg.mcp-ovs-ha.local'}
2018-10-10 21:32:00,791 [salt.state       :1941][INFO    ][3041] Completed state [msg.mcp-ovs-ha.local] at time 21:32:00.791745 duration_in_ms=2.408
2018-10-10 21:32:00,792 [salt.state       :1770][INFO    ][3041] Running state [cfg01] at time 21:32:00.792411
2018-10-10 21:32:00,792 [salt.state       :1803][INFO    ][3041] Executing state host.present for [cfg01]
2018-10-10 21:32:00,793 [salt.state       :290 ][INFO    ][3041] Host cfg01 (192.168.10.11) already present
2018-10-10 21:32:00,793 [salt.state       :1941][INFO    ][3041] Completed state [cfg01] at time 21:32:00.793391 duration_in_ms=0.98
2018-10-10 21:32:00,794 [salt.state       :1770][INFO    ][3041] Running state [cfg01.mcp-ovs-ha.local] at time 21:32:00.794020
2018-10-10 21:32:00,794 [salt.state       :1803][INFO    ][3041] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-10 21:32:00,794 [salt.state       :290 ][INFO    ][3041] Host cfg01.mcp-ovs-ha.local (192.168.10.11) already present
2018-10-10 21:32:00,794 [salt.state       :1941][INFO    ][3041] Completed state [cfg01.mcp-ovs-ha.local] at time 21:32:00.794942 duration_in_ms=0.922
2018-10-10 21:32:00,795 [salt.state       :1770][INFO    ][3041] Running state [cmp002] at time 21:32:00.795275
2018-10-10 21:32:00,795 [salt.state       :1803][INFO    ][3041] Executing state host.present for [cmp002]
2018-10-10 21:32:00,802 [salt.state       :290 ][INFO    ][3041] {'host': 'cmp002'}
2018-10-10 21:32:00,802 [salt.state       :1941][INFO    ][3041] Completed state [cmp002] at time 21:32:00.802605 duration_in_ms=7.33
2018-10-10 21:32:00,802 [salt.state       :1770][INFO    ][3041] Running state [cmp002.mcp-ovs-ha.local] at time 21:32:00.802948
2018-10-10 21:32:00,803 [salt.state       :1803][INFO    ][3041] Executing state host.present for [cmp002.mcp-ovs-ha.local]
2018-10-10 21:32:00,804 [salt.state       :290 ][INFO    ][3041] {'host': 'cmp002.mcp-ovs-ha.local'}
2018-10-10 21:32:00,804 [salt.state       :1941][INFO    ][3041] Completed state [cmp002.mcp-ovs-ha.local] at time 21:32:00.804579 duration_in_ms=1.631
2018-10-10 21:32:00,804 [salt.state       :1770][INFO    ][3041] Running state [cmp001] at time 21:32:00.804928
2018-10-10 21:32:00,805 [salt.state       :1803][INFO    ][3041] Executing state host.present for [cmp001]
2018-10-10 21:32:00,807 [salt.state       :290 ][INFO    ][3041] {'host': 'cmp001'}
2018-10-10 21:32:00,807 [salt.state       :1941][INFO    ][3041] Completed state [cmp001] at time 21:32:00.807427 duration_in_ms=2.499
2018-10-10 21:32:00,807 [salt.state       :1770][INFO    ][3041] Running state [cmp001.mcp-ovs-ha.local] at time 21:32:00.807767
2018-10-10 21:32:00,808 [salt.state       :1803][INFO    ][3041] Executing state host.present for [cmp001.mcp-ovs-ha.local]
2018-10-10 21:32:00,811 [salt.state       :290 ][INFO    ][3041] {'host': 'cmp001.mcp-ovs-ha.local'}
2018-10-10 21:32:00,811 [salt.state       :1941][INFO    ][3041] Completed state [cmp001.mcp-ovs-ha.local] at time 21:32:00.811629 duration_in_ms=3.862
2018-10-10 21:32:00,812 [salt.state       :1770][INFO    ][3041] Running state [dbs01] at time 21:32:00.811972
2018-10-10 21:32:00,812 [salt.state       :1803][INFO    ][3041] Executing state host.present for [dbs01]
2018-10-10 21:32:00,813 [salt.state       :290 ][INFO    ][3041] {'host': 'dbs01'}
2018-10-10 21:32:00,813 [salt.state       :1941][INFO    ][3041] Completed state [dbs01] at time 21:32:00.813938 duration_in_ms=1.966
2018-10-10 21:32:00,814 [salt.state       :1770][INFO    ][3041] Running state [dbs01.mcp-ovs-ha.local] at time 21:32:00.814284
2018-10-10 21:32:00,814 [salt.state       :1803][INFO    ][3041] Executing state host.present for [dbs01.mcp-ovs-ha.local]
2018-10-10 21:32:00,815 [salt.state       :290 ][INFO    ][3041] {'host': 'dbs01.mcp-ovs-ha.local'}
2018-10-10 21:32:00,816 [salt.state       :1941][INFO    ][3041] Completed state [dbs01.mcp-ovs-ha.local] at time 21:32:00.816201 duration_in_ms=1.917
2018-10-10 21:32:00,816 [salt.state       :1770][INFO    ][3041] Running state [dbs02] at time 21:32:00.816877
2018-10-10 21:32:00,817 [salt.state       :1803][INFO    ][3041] Executing state host.present for [dbs02]
2018-10-10 21:32:00,818 [salt.state       :290 ][INFO    ][3041] {'host': 'dbs02'}
2018-10-10 21:32:00,818 [salt.state       :1941][INFO    ][3041] Completed state [dbs02] at time 21:32:00.818488 duration_in_ms=1.611
2018-10-10 21:32:00,818 [salt.state       :1770][INFO    ][3041] Running state [dbs02.mcp-ovs-ha.local] at time 21:32:00.818827
2018-10-10 21:32:00,819 [salt.state       :1803][INFO    ][3041] Executing state host.present for [dbs02.mcp-ovs-ha.local]
2018-10-10 21:32:00,829 [salt.state       :290 ][INFO    ][3041] {'host': 'dbs02.mcp-ovs-ha.local'}
2018-10-10 21:32:00,829 [salt.state       :1941][INFO    ][3041] Completed state [dbs02.mcp-ovs-ha.local] at time 21:32:00.829724 duration_in_ms=10.897
2018-10-10 21:32:00,830 [salt.state       :1770][INFO    ][3041] Running state [dbs03] at time 21:32:00.830091
2018-10-10 21:32:00,830 [salt.state       :1803][INFO    ][3041] Executing state host.present for [dbs03]
2018-10-10 21:32:00,831 [salt.state       :290 ][INFO    ][3041] {'host': 'dbs03'}
2018-10-10 21:32:00,831 [salt.state       :1941][INFO    ][3041] Completed state [dbs03] at time 21:32:00.831733 duration_in_ms=1.642
2018-10-10 21:32:00,832 [salt.state       :1770][INFO    ][3041] Running state [dbs03.mcp-ovs-ha.local] at time 21:32:00.832105
2018-10-10 21:32:00,832 [salt.state       :1803][INFO    ][3041] Executing state host.present for [dbs03.mcp-ovs-ha.local]
2018-10-10 21:32:00,833 [salt.state       :290 ][INFO    ][3041] {'host': 'dbs03.mcp-ovs-ha.local'}
2018-10-10 21:32:00,834 [salt.state       :1941][INFO    ][3041] Completed state [dbs03.mcp-ovs-ha.local] at time 21:32:00.834203 duration_in_ms=2.098
2018-10-10 21:32:00,834 [salt.state       :1770][INFO    ][3041] Running state [mas01] at time 21:32:00.834554
2018-10-10 21:32:00,835 [salt.state       :1803][INFO    ][3041] Executing state host.present for [mas01]
2018-10-10 21:32:00,837 [salt.state       :290 ][INFO    ][3041] {'host': 'mas01'}
2018-10-10 21:32:00,837 [salt.state       :1941][INFO    ][3041] Completed state [mas01] at time 21:32:00.837717 duration_in_ms=3.163
2018-10-10 21:32:00,838 [salt.state       :1770][INFO    ][3041] Running state [mas01.mcp-ovs-ha.local] at time 21:32:00.838362
2018-10-10 21:32:00,838 [salt.state       :1803][INFO    ][3041] Executing state host.present for [mas01.mcp-ovs-ha.local]
2018-10-10 21:32:00,840 [salt.state       :290 ][INFO    ][3041] {'host': 'mas01.mcp-ovs-ha.local'}
2018-10-10 21:32:00,840 [salt.state       :1941][INFO    ][3041] Completed state [mas01.mcp-ovs-ha.local] at time 21:32:00.840929 duration_in_ms=2.567
2018-10-10 21:32:00,841 [salt.state       :1770][INFO    ][3041] Running state [ctl02] at time 21:32:00.841278
2018-10-10 21:32:00,841 [salt.state       :1803][INFO    ][3041] Executing state host.present for [ctl02]
2018-10-10 21:32:00,843 [salt.state       :290 ][INFO    ][3041] {'host': 'ctl02'}
2018-10-10 21:32:00,843 [salt.state       :1941][INFO    ][3041] Completed state [ctl02] at time 21:32:00.843231 duration_in_ms=1.953
2018-10-10 21:32:00,843 [salt.state       :1770][INFO    ][3041] Running state [ctl02.mcp-ovs-ha.local] at time 21:32:00.843872
2018-10-10 21:32:00,844 [salt.state       :1803][INFO    ][3041] Executing state host.present for [ctl02.mcp-ovs-ha.local]
2018-10-10 21:32:00,846 [salt.state       :290 ][INFO    ][3041] {'host': 'ctl02.mcp-ovs-ha.local'}
2018-10-10 21:32:00,846 [salt.state       :1941][INFO    ][3041] Completed state [ctl02.mcp-ovs-ha.local] at time 21:32:00.846432 duration_in_ms=2.559
2018-10-10 21:32:00,846 [salt.state       :1770][INFO    ][3041] Running state [ctl03] at time 21:32:00.846780
2018-10-10 21:32:00,847 [salt.state       :1803][INFO    ][3041] Executing state host.present for [ctl03]
2018-10-10 21:32:00,848 [salt.state       :290 ][INFO    ][3041] {'host': 'ctl03'}
2018-10-10 21:32:00,848 [salt.state       :1941][INFO    ][3041] Completed state [ctl03] at time 21:32:00.848458 duration_in_ms=1.677
2018-10-10 21:32:00,849 [salt.state       :1770][INFO    ][3041] Running state [ctl03.mcp-ovs-ha.local] at time 21:32:00.849110
2018-10-10 21:32:00,849 [salt.state       :1803][INFO    ][3041] Executing state host.present for [ctl03.mcp-ovs-ha.local]
2018-10-10 21:32:00,851 [salt.state       :290 ][INFO    ][3041] {'host': 'ctl03.mcp-ovs-ha.local'}
2018-10-10 21:32:00,851 [salt.state       :1941][INFO    ][3041] Completed state [ctl03.mcp-ovs-ha.local] at time 21:32:00.851912 duration_in_ms=2.802
2018-10-10 21:32:00,852 [salt.state       :1770][INFO    ][3041] Running state [ctl01] at time 21:32:00.852290
2018-10-10 21:32:00,852 [salt.state       :1803][INFO    ][3041] Executing state host.present for [ctl01]
2018-10-10 21:32:00,854 [salt.state       :290 ][INFO    ][3041] {'host': 'ctl01'}
2018-10-10 21:32:00,854 [salt.state       :1941][INFO    ][3041] Completed state [ctl01] at time 21:32:00.854295 duration_in_ms=2.005
2018-10-10 21:32:00,854 [salt.state       :1770][INFO    ][3041] Running state [ctl01.mcp-ovs-ha.local] at time 21:32:00.854651
2018-10-10 21:32:00,855 [salt.state       :1803][INFO    ][3041] Executing state host.present for [ctl01.mcp-ovs-ha.local]
2018-10-10 21:32:00,857 [salt.state       :290 ][INFO    ][3041] {'host': 'ctl01.mcp-ovs-ha.local'}
2018-10-10 21:32:00,858 [salt.state       :1941][INFO    ][3041] Completed state [ctl01.mcp-ovs-ha.local] at time 21:32:00.858476 duration_in_ms=3.825
2018-10-10 21:32:00,858 [salt.state       :1770][INFO    ][3041] Running state [ctl] at time 21:32:00.858838
2018-10-10 21:32:00,859 [salt.state       :1803][INFO    ][3041] Executing state host.present for [ctl]
2018-10-10 21:32:00,860 [salt.state       :290 ][INFO    ][3041] {'host': 'ctl'}
2018-10-10 21:32:00,860 [salt.state       :1941][INFO    ][3041] Completed state [ctl] at time 21:32:00.860848 duration_in_ms=2.01
2018-10-10 21:32:00,861 [salt.state       :1770][INFO    ][3041] Running state [ctl.mcp-ovs-ha.local] at time 21:32:00.861205
2018-10-10 21:32:00,861 [salt.state       :1803][INFO    ][3041] Executing state host.present for [ctl.mcp-ovs-ha.local]
2018-10-10 21:32:00,863 [salt.state       :290 ][INFO    ][3041] {'host': 'ctl.mcp-ovs-ha.local'}
2018-10-10 21:32:00,863 [salt.state       :1941][INFO    ][3041] Completed state [ctl.mcp-ovs-ha.local] at time 21:32:00.863216 duration_in_ms=2.011
2018-10-10 21:32:00,863 [salt.state       :1770][INFO    ][3041] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 21:32:00.863470
2018-10-10 21:32:00,863 [salt.state       :1803][INFO    ][3041] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-10-10 21:32:00,865 [salt.state       :290 ][INFO    ][3041] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-10-10 21:32:00,865 [salt.state       :1941][INFO    ][3041] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 21:32:00.865235 duration_in_ms=1.765
2018-10-10 21:32:00,866 [salt.state       :1770][INFO    ][3041] Running state [ens3] at time 21:32:00.866785
2018-10-10 21:32:00,867 [salt.state       :1803][INFO    ][3041] Executing state network.managed for [ens3]
2018-10-10 21:32:01,048 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['ifup', 'ens3'] in directory '/root'
2018-10-10 21:32:02,182 [salt.state       :290 ][INFO    ][3041] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-10-10 21:32:02,184 [salt.state       :1941][INFO    ][3041] Completed state [ens3] at time 21:32:02.184830 duration_in_ms=1318.044
2018-10-10 21:32:02,185 [salt.state       :1770][INFO    ][3041] Running state [ens2] at time 21:32:02.185189
2018-10-10 21:32:02,185 [salt.state       :1803][INFO    ][3041] Executing state network.managed for [ens2]
2018-10-10 21:32:02,220 [salt.state       :290 ][INFO    ][3041] {'interface': 'Added network interface.'}
2018-10-10 21:32:02,221 [salt.state       :1941][INFO    ][3041] Completed state [ens2] at time 21:32:02.221420 duration_in_ms=36.231
2018-10-10 21:32:02,222 [salt.state       :1770][INFO    ][3041] Running state [linux_system_network] at time 21:32:02.222428
2018-10-10 21:32:02,222 [salt.state       :1803][INFO    ][3041] Executing state network.system for [linux_system_network]
2018-10-10 21:32:02,223 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-10-10 21:32:02,243 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-10-10 21:32:02,269 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-10-10 21:32:02,293 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-10-10 21:32:02,828 [salt.loaded.int.module.debian_ip:1970][WARNING ][3041] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-10-10 21:32:02,829 [salt.state       :290 ][INFO    ][3041] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb03\n\n+DOMAIN=mcp-ovs-ha.local\n\n+SEARCH=maas\n'}
2018-10-10 21:32:02,830 [salt.state       :1941][INFO    ][3041] Completed state [linux_system_network] at time 21:32:02.830113 duration_in_ms=607.685
2018-10-10 21:32:02,830 [salt.state       :1770][INFO    ][3041] Running state [/etc/profile.d/proxy.sh] at time 21:32:02.830545
2018-10-10 21:32:02,830 [salt.state       :1803][INFO    ][3041] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-10-10 21:32:02,831 [salt.state       :290 ][INFO    ][3041] File /etc/profile.d/proxy.sh is not present
2018-10-10 21:32:02,831 [salt.state       :1941][INFO    ][3041] Completed state [/etc/profile.d/proxy.sh] at time 21:32:02.831731 duration_in_ms=1.186
2018-10-10 21:32:02,832 [salt.state       :1770][INFO    ][3041] Running state [/etc/apt/apt.conf.d/95proxies] at time 21:32:02.831994
2018-10-10 21:32:02,835 [salt.state       :1803][INFO    ][3041] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-10-10 21:32:02,836 [salt.state       :290 ][INFO    ][3041] File /etc/apt/apt.conf.d/95proxies is not present
2018-10-10 21:32:02,836 [salt.state       :1941][INFO    ][3041] Completed state [/etc/apt/apt.conf.d/95proxies] at time 21:32:02.836399 duration_in_ms=4.405
2018-10-10 21:32:02,839 [salt.state       :1770][INFO    ][3041] Running state [ntp] at time 21:32:02.839483
2018-10-10 21:32:02,839 [salt.state       :1803][INFO    ][3041] Executing state pkg.installed for [ntp]
2018-10-10 21:32:03,146 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 21:32:03,178 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-10-10 21:32:05,255 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213205239894
2018-10-10 21:32:05,275 [salt.minion      :1431][INFO    ][6121] Starting a new job with PID 6121
2018-10-10 21:32:05,302 [salt.minion      :1708][INFO    ][6121] Returning information for job: 20181010213205239894
2018-10-10 21:32:08,431 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:32:08,503 [salt.state       :290 ][INFO    ][3041] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-10-10 21:32:08,542 [salt.state       :905 ][INFO    ][3041] Loading fresh modules for state activity
2018-10-10 21:32:08,617 [salt.state       :1941][INFO    ][3041] Completed state [ntp] at time 21:32:08.617316 duration_in_ms=5777.832
2018-10-10 21:32:08,624 [salt.state       :1770][INFO    ][3041] Running state [/etc/ntp.conf] at time 21:32:08.624147
2018-10-10 21:32:08,624 [salt.state       :1803][INFO    ][3041] Executing state file.managed for [/etc/ntp.conf]
2018-10-10 21:32:08,654 [salt.fileclient  :1215][INFO    ][3041] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-10-10 21:32:08,750 [salt.state       :290 ][INFO    ][3041] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-10-10 21:32:08,752 [salt.state       :1941][INFO    ][3041] Completed state [/etc/ntp.conf] at time 21:32:08.751989 duration_in_ms=127.842
2018-10-10 21:32:09,395 [salt.state       :1770][INFO    ][3041] Running state [ntp] at time 21:32:09.395567
2018-10-10 21:32:09,396 [salt.state       :1803][INFO    ][3041] Executing state service.running for [ntp]
2018-10-10 21:32:09,397 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-10-10 21:32:09,417 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-10 21:32:09,436 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-10-10 21:32:09,456 [salt.state       :290 ][INFO    ][3041] The service ntp is already running
2018-10-10 21:32:09,457 [salt.state       :1941][INFO    ][3041] Completed state [ntp] at time 21:32:09.457024 duration_in_ms=61.458
2018-10-10 21:32:09,457 [salt.state       :1770][INFO    ][3041] Running state [ntp] at time 21:32:09.457399
2018-10-10 21:32:09,457 [salt.state       :1803][INFO    ][3041] Executing state service.mod_watch for [ntp]
2018-10-10 21:32:09,458 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-10 21:32:09,480 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3041] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-10-10 21:32:09,546 [salt.state       :290 ][INFO    ][3041] {'ntp': True}
2018-10-10 21:32:09,546 [salt.state       :1941][INFO    ][3041] Completed state [ntp] at time 21:32:09.546652 duration_in_ms=89.252
2018-10-10 21:32:09,562 [salt.minion      :1708][INFO    ][3041] Returning information for job: 20181010213118824158
2018-10-10 21:32:13,893 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181010213213878514
2018-10-10 21:32:13,919 [salt.minion      :1431][INFO    ][6558] Starting a new job with PID 6558
2018-10-10 21:32:13,948 [salt.minion      :1708][INFO    ][6558] Returning information for job: 20181010213213878514
2018-10-10 21:32:32,157 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command pkg.upgrade with jid 20181010213232144446
2018-10-10 21:32:32,178 [salt.minion      :1431][INFO    ][6585] Starting a new job with PID 6585
2018-10-10 21:32:32,211 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6585] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:32:32,726 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6585] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-10-10 21:32:37,268 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213237251753
2018-10-10 21:32:37,291 [salt.minion      :1431][INFO    ][6768] Starting a new job with PID 6768
2018-10-10 21:32:37,333 [salt.minion      :1708][INFO    ][6768] Returning information for job: 20181010213237251753
2018-10-10 21:32:47,437 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213247427883
2018-10-10 21:32:47,461 [salt.minion      :1431][INFO    ][6941] Starting a new job with PID 6941
2018-10-10 21:32:47,490 [salt.minion      :1708][INFO    ][6941] Returning information for job: 20181010213247427883
2018-10-10 21:32:57,514 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213257496603
2018-10-10 21:32:57,538 [salt.minion      :1431][INFO    ][7144] Starting a new job with PID 7144
2018-10-10 21:32:57,622 [salt.minion      :1708][INFO    ][7144] Returning information for job: 20181010213257496603
2018-10-10 21:33:07,611 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213307597693
2018-10-10 21:33:07,637 [salt.minion      :1431][INFO    ][8362] Starting a new job with PID 8362
2018-10-10 21:33:07,670 [salt.minion      :1708][INFO    ][8362] Returning information for job: 20181010213307597693
2018-10-10 21:33:17,744 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213317729403
2018-10-10 21:33:17,778 [salt.minion      :1431][INFO    ][10707] Starting a new job with PID 10707
2018-10-10 21:33:17,809 [salt.minion      :1708][INFO    ][10707] Returning information for job: 20181010213317729403
2018-10-10 21:33:27,975 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213327956651
2018-10-10 21:33:27,999 [salt.minion      :1431][INFO    ][13305] Starting a new job with PID 13305
2018-10-10 21:33:28,029 [salt.minion      :1708][INFO    ][13305] Returning information for job: 20181010213327956651
2018-10-10 21:33:38,010 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213337990770
2018-10-10 21:33:38,056 [salt.minion      :1431][INFO    ][14625] Starting a new job with PID 14625
2018-10-10 21:33:38,092 [salt.minion      :1708][INFO    ][14625] Returning information for job: 20181010213337990770
2018-10-10 21:33:48,095 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213348079562
2018-10-10 21:33:48,115 [salt.minion      :1431][INFO    ][15110] Starting a new job with PID 15110
2018-10-10 21:33:48,147 [salt.minion      :1708][INFO    ][15110] Returning information for job: 20181010213348079562
2018-10-10 21:33:58,115 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213358097900
2018-10-10 21:33:58,147 [salt.minion      :1431][INFO    ][15565] Starting a new job with PID 15565
2018-10-10 21:33:58,176 [salt.minion      :1708][INFO    ][15565] Returning information for job: 20181010213358097900
2018-10-10 21:34:08,168 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213408151924
2018-10-10 21:34:08,200 [salt.minion      :1431][INFO    ][22631] Starting a new job with PID 22631
2018-10-10 21:34:08,228 [salt.minion      :1708][INFO    ][22631] Returning information for job: 20181010213408151924
2018-10-10 21:34:18,303 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213418291735
2018-10-10 21:34:18,329 [salt.minion      :1431][INFO    ][22997] Starting a new job with PID 22997
2018-10-10 21:34:18,354 [salt.minion      :1708][INFO    ][22997] Returning information for job: 20181010213418291735
2018-10-10 21:34:21,333 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6585] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:34:21,378 [salt.minion      :1708][INFO    ][6585] Returning information for job: 20181010213232144446
2018-10-10 21:34:38,806 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command test.ping with jid 20181010213438797634
2018-10-10 21:34:38,835 [salt.minion      :1431][INFO    ][23043] Starting a new job with PID 23043
2018-10-10 21:34:38,865 [salt.minion      :1708][INFO    ][23043] Returning information for job: 20181010213438797634
2018-10-10 21:36:01,319 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.sls with jid 20181010213601310114
2018-10-10 21:36:01,341 [salt.minion      :1431][INFO    ][23058] Starting a new job with PID 23058
2018-10-10 21:36:06,439 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213606428443
2018-10-10 21:36:06,460 [salt.minion      :1431][INFO    ][23063] Starting a new job with PID 23063
2018-10-10 21:36:06,478 [salt.minion      :1708][INFO    ][23063] Returning information for job: 20181010213606428443
2018-10-10 21:36:07,451 [salt.state       :905 ][INFO    ][23058] Loading fresh modules for state activity
2018-10-10 21:36:07,512 [salt.fileclient  :1215][INFO    ][23058] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-10-10 21:36:07,548 [salt.fileclient  :1215][INFO    ][23058] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-10-10 21:36:08,343 [salt.state       :1770][INFO    ][23058] Running state [keepalived] at time 21:36:08.343695
2018-10-10 21:36:08,344 [salt.state       :1803][INFO    ][23058] Executing state pkg.installed for [keepalived]
2018-10-10 21:36:08,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:36:08,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-10-10 21:36:08,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-10 21:36:11,023 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 21:36:11,058 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-10-10 21:36:15,898 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:36:15,946 [salt.state       :290 ][INFO    ][23058] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-10-10 21:36:15,971 [salt.state       :905 ][INFO    ][23058] Loading fresh modules for state activity
2018-10-10 21:36:16,014 [salt.state       :1941][INFO    ][23058] Completed state [keepalived] at time 21:36:16.014703 duration_in_ms=7671.008
2018-10-10 21:36:16,022 [salt.state       :1770][INFO    ][23058] Running state [lsof] at time 21:36:16.021973
2018-10-10 21:36:16,022 [salt.state       :1803][INFO    ][23058] Executing state pkg.installed for [lsof]
2018-10-10 21:36:16,629 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010213616562838
2018-10-10 21:36:16,650 [salt.minion      :1431][INFO    ][24357] Starting a new job with PID 24357
2018-10-10 21:36:16,668 [salt.minion      :1708][INFO    ][24357] Returning information for job: 20181010213616562838
2018-10-10 21:36:16,772 [salt.state       :290 ][INFO    ][23058] All specified packages are already installed
2018-10-10 21:36:16,772 [salt.state       :1941][INFO    ][23058] Completed state [lsof] at time 21:36:16.772696 duration_in_ms=750.722
2018-10-10 21:36:16,776 [salt.state       :1770][INFO    ][23058] Running state [/etc/keepalived/keepalived.conf] at time 21:36:16.775998
2018-10-10 21:36:16,776 [salt.state       :1803][INFO    ][23058] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-10 21:36:16,807 [salt.fileclient  :1215][INFO    ][23058] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-10-10 21:36:16,874 [salt.state       :290 ][INFO    ][23058] File changed:
New file
2018-10-10 21:36:16,874 [salt.state       :1941][INFO    ][23058] Completed state [/etc/keepalived/keepalived.conf] at time 21:36:16.874836 duration_in_ms=98.837
2018-10-10 21:36:16,875 [salt.state       :1770][INFO    ][23058] Running state [keepalived] at time 21:36:16.875774
2018-10-10 21:36:16,876 [salt.state       :1803][INFO    ][23058] Executing state service.running for [keepalived]
2018-10-10 21:36:16,876 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-10 21:36:16,904 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-10 21:36:16,929 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-10 21:36:16,952 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-10-10 21:36:17,023 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-10 21:36:17,040 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-10 21:36:17,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23058] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-10 21:36:17,082 [salt.state       :290 ][INFO    ][23058] {'keepalived': True}
2018-10-10 21:36:17,083 [salt.state       :1941][INFO    ][23058] Completed state [keepalived] at time 21:36:17.083007 duration_in_ms=207.232
2018-10-10 21:36:17,085 [salt.minion      :1708][INFO    ][23058] Returning information for job: 20181010213601310114
2018-10-10 21:38:35,940 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command pillar.get with jid 20181010213835929596
2018-10-10 21:38:35,978 [salt.minion      :1431][INFO    ][24410] Starting a new job with PID 24410
2018-10-10 21:38:35,988 [salt.minion      :1708][INFO    ][24410] Returning information for job: 20181010213835929596
2018-10-10 21:51:31,073 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.sls with jid 20181010215131065602
2018-10-10 21:51:31,098 [salt.minion      :1431][INFO    ][24465] Starting a new job with PID 24465
2018-10-10 21:51:37,353 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010215137341480
2018-10-10 21:51:37,370 [salt.minion      :1431][INFO    ][24472] Starting a new job with PID 24472
2018-10-10 21:51:37,391 [salt.minion      :1708][INFO    ][24472] Returning information for job: 20181010215137341480
2018-10-10 21:51:37,809 [salt.state       :905 ][INFO    ][24465] Loading fresh modules for state activity
2018-10-10 21:51:38,772 [salt.fileclient  :1215][INFO    ][24465] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-10-10 21:51:38,973 [salt.fileclient  :1215][INFO    ][24465] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-10-10 21:51:39,006 [salt.fileclient  :1215][INFO    ][24465] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-10-10 21:51:39,810 [salt.state       :1770][INFO    ][24465] Running state [memcached] at time 21:51:39.810138
2018-10-10 21:51:39,810 [salt.state       :1803][INFO    ][24465] Executing state pkg.installed for [memcached]
2018-10-10 21:51:39,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:51:40,309 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-10-10 21:51:40,447 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-10 21:51:44,780 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 21:51:44,814 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-10-10 21:51:47,393 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010215147384923
2018-10-10 21:51:47,413 [salt.minion      :1431][INFO    ][25226] Starting a new job with PID 25226
2018-10-10 21:51:47,437 [salt.minion      :1708][INFO    ][25226] Returning information for job: 20181010215147384923
2018-10-10 21:51:48,831 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:51:48,877 [salt.state       :290 ][INFO    ][24465] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-10-10 21:51:48,903 [salt.state       :905 ][INFO    ][24465] Loading fresh modules for state activity
2018-10-10 21:51:48,953 [salt.state       :1941][INFO    ][24465] Completed state [memcached] at time 21:51:48.953033 duration_in_ms=9142.895
2018-10-10 21:51:48,960 [salt.state       :1770][INFO    ][24465] Running state [python-memcache] at time 21:51:48.960466
2018-10-10 21:51:48,960 [salt.state       :1803][INFO    ][24465] Executing state pkg.installed for [python-memcache]
2018-10-10 21:51:49,867 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 21:51:49,898 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-10-10 21:51:52,035 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:51:52,082 [salt.state       :290 ][INFO    ][24465] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-10-10 21:51:52,105 [salt.state       :905 ][INFO    ][24465] Loading fresh modules for state activity
2018-10-10 21:51:52,152 [salt.state       :1941][INFO    ][24465] Completed state [python-memcache] at time 21:51:52.151970 duration_in_ms=3191.504
2018-10-10 21:51:52,157 [salt.state       :1770][INFO    ][24465] Running state [/etc/memcached.conf] at time 21:51:52.157435
2018-10-10 21:51:52,158 [salt.state       :1803][INFO    ][24465] Executing state file.managed for [/etc/memcached.conf]
2018-10-10 21:51:52,188 [salt.fileclient  :1215][INFO    ][24465] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-10-10 21:51:52,225 [salt.state       :290 ][INFO    ][24465] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-10-10 21:51:52,232 [salt.state       :1941][INFO    ][24465] Completed state [/etc/memcached.conf] at time 21:51:52.232900 duration_in_ms=75.465
2018-10-10 21:51:52,772 [salt.state       :1770][INFO    ][24465] Running state [memcached] at time 21:51:52.772729
2018-10-10 21:51:52,773 [salt.state       :1803][INFO    ][24465] Executing state service.running for [memcached]
2018-10-10 21:51:52,774 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-10 21:51:52,794 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-10 21:51:52,815 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-10 21:51:52,836 [salt.state       :290 ][INFO    ][24465] The service memcached is already running
2018-10-10 21:51:52,837 [salt.state       :1941][INFO    ][24465] Completed state [memcached] at time 21:51:52.837333 duration_in_ms=64.606
2018-10-10 21:51:52,837 [salt.state       :1770][INFO    ][24465] Running state [memcached] at time 21:51:52.837657
2018-10-10 21:51:52,838 [salt.state       :1803][INFO    ][24465] Executing state service.mod_watch for [memcached]
2018-10-10 21:51:52,839 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-10 21:51:52,861 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24465] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-10-10 21:51:52,897 [salt.state       :290 ][INFO    ][24465] {'memcached': True}
2018-10-10 21:51:52,902 [salt.state       :1941][INFO    ][24465] Completed state [memcached] at time 21:51:52.902835 duration_in_ms=65.178
2018-10-10 21:51:52,905 [salt.minion      :1708][INFO    ][24465] Returning information for job: 20181010215131065602
2018-10-10 21:51:54,113 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.sls with jid 20181010215154105761
2018-10-10 21:51:54,143 [salt.minion      :1431][INFO    ][25475] Starting a new job with PID 25475
2018-10-10 21:52:00,455 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010215200447858
2018-10-10 21:52:00,484 [salt.minion      :1431][INFO    ][25480] Starting a new job with PID 25480
2018-10-10 21:52:00,506 [salt.minion      :1708][INFO    ][25480] Returning information for job: 20181010215200447858
2018-10-10 21:52:01,870 [salt.state       :905 ][INFO    ][25475] Loading fresh modules for state activity
2018-10-10 21:52:03,018 [salt.fileclient  :1215][INFO    ][25475] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-10-10 21:52:03,056 [salt.fileclient  :1215][INFO    ][25475] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-10-10 21:52:03,887 [salt.state       :1770][INFO    ][25475] Running state [haproxy] at time 21:52:03.887759
2018-10-10 21:52:03,888 [salt.state       :1803][INFO    ][25475] Executing state pkg.installed for [haproxy]
2018-10-10 21:52:03,889 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:52:04,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-10-10 21:52:04,592 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-10 21:52:06,904 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 21:52:06,932 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-10-10 21:52:10,611 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010215210593892
2018-10-10 21:52:10,632 [salt.minion      :1431][INFO    ][26277] Starting a new job with PID 26277
2018-10-10 21:52:10,657 [salt.minion      :1708][INFO    ][26277] Returning information for job: 20181010215210593892
2018-10-10 21:52:11,518 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:52:11,577 [salt.state       :290 ][INFO    ][25475] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-10-10 21:52:11,606 [salt.state       :905 ][INFO    ][25475] Loading fresh modules for state activity
2018-10-10 21:52:11,653 [salt.state       :1941][INFO    ][25475] Completed state [haproxy] at time 21:52:11.653342 duration_in_ms=7765.584
2018-10-10 21:52:11,659 [salt.state       :1770][INFO    ][25475] Running state [/etc/default/haproxy] at time 21:52:11.659364
2018-10-10 21:52:11,659 [salt.state       :1803][INFO    ][25475] Executing state file.managed for [/etc/default/haproxy]
2018-10-10 21:52:11,698 [salt.fileclient  :1215][INFO    ][25475] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-10-10 21:52:11,702 [salt.state       :290 ][INFO    ][25475] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-10-10 21:52:11,703 [salt.state       :1941][INFO    ][25475] Completed state [/etc/default/haproxy] at time 21:52:11.703178 duration_in_ms=43.814
2018-10-10 21:52:11,704 [salt.state       :1770][INFO    ][25475] Running state [/etc/haproxy/haproxy.cfg] at time 21:52:11.704719
2018-10-10 21:52:11,705 [salt.state       :1803][INFO    ][25475] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-10 21:52:11,724 [salt.fileclient  :1215][INFO    ][25475] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-10-10 21:52:11,943 [salt.state       :290 ][INFO    ][25475] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-10-10 21:52:11,951 [salt.state       :1941][INFO    ][25475] Completed state [/etc/haproxy/haproxy.cfg] at time 21:52:11.951234 duration_in_ms=246.515
2018-10-10 21:52:11,951 [salt.state       :1770][INFO    ][25475] Running state [/etc/haproxy/ssl] at time 21:52:11.951645
2018-10-10 21:52:11,951 [salt.state       :1803][INFO    ][25475] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-10 21:52:11,953 [salt.state       :290 ][INFO    ][25475] {'/etc/haproxy/ssl': 'New Dir'}
2018-10-10 21:52:11,953 [salt.state       :1941][INFO    ][25475] Completed state [/etc/haproxy/ssl] at time 21:52:11.953880 duration_in_ms=2.235
2018-10-10 21:52:11,954 [salt.state       :1770][INFO    ][25475] Running state [/etc/haproxy/errors/429.http11] at time 21:52:11.954210
2018-10-10 21:52:11,954 [salt.state       :1803][INFO    ][25475] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-10 21:52:11,987 [salt.fileclient  :1215][INFO    ][25475] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-10-10 21:52:11,999 [salt.state       :290 ][INFO    ][25475] File changed:
New file
2018-10-10 21:52:12,000 [salt.state       :1941][INFO    ][25475] Completed state [/etc/haproxy/errors/429.http11] at time 21:52:12.000602 duration_in_ms=46.391
2018-10-10 21:52:12,002 [salt.state       :1770][INFO    ][25475] Running state [haproxy_status_packages] at time 21:52:12.001962
2018-10-10 21:52:12,002 [salt.state       :1803][INFO    ][25475] Executing state pkg.installed for [haproxy_status_packages]
2018-10-10 21:52:12,906 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 21:52:12,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-10-10 21:52:15,304 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 21:52:15,353 [salt.state       :290 ][INFO    ][25475] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-10-10 21:52:15,379 [salt.state       :905 ][INFO    ][25475] Loading fresh modules for state activity
2018-10-10 21:52:15,430 [salt.state       :1941][INFO    ][25475] Completed state [haproxy_status_packages] at time 21:52:15.430906 duration_in_ms=3428.943
2018-10-10 21:52:15,436 [salt.state       :1770][INFO    ][25475] Running state [/usr/bin/haproxy-status.sh] at time 21:52:15.436303
2018-10-10 21:52:15,436 [salt.state       :1803][INFO    ][25475] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-10 21:52:15,464 [salt.fileclient  :1215][INFO    ][25475] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-10-10 21:52:15,502 [salt.state       :290 ][INFO    ][25475] File changed:
New file
2018-10-10 21:52:15,502 [salt.state       :1941][INFO    ][25475] Completed state [/usr/bin/haproxy-status.sh] at time 21:52:15.502721 duration_in_ms=66.418
2018-10-10 21:52:15,505 [salt.state       :1770][INFO    ][25475] Running state [net.ipv4.ip_nonlocal_bind] at time 21:52:15.505779
2018-10-10 21:52:15,506 [salt.state       :1803][INFO    ][25475] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-10 21:52:15,510 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-10-10 21:52:15,526 [salt.state       :290 ][INFO    ][25475] {'net.ipv4.ip_nonlocal_bind': 1}
2018-10-10 21:52:15,527 [salt.state       :1941][INFO    ][25475] Completed state [net.ipv4.ip_nonlocal_bind] at time 21:52:15.527487 duration_in_ms=21.707
2018-10-10 21:52:16,096 [salt.state       :1770][INFO    ][25475] Running state [haproxy] at time 21:52:16.096103
2018-10-10 21:52:16,096 [salt.state       :1803][INFO    ][25475] Executing state service.running for [haproxy]
2018-10-10 21:52:16,097 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-10 21:52:16,120 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-10 21:52:16,137 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-10 21:52:16,154 [salt.state       :290 ][INFO    ][25475] The service haproxy is already running
2018-10-10 21:52:16,155 [salt.state       :1941][INFO    ][25475] Completed state [haproxy] at time 21:52:16.154987 duration_in_ms=58.885
2018-10-10 21:52:16,156 [salt.state       :1770][INFO    ][25475] Running state [haproxy] at time 21:52:16.156019
2018-10-10 21:52:16,156 [salt.state       :1803][INFO    ][25475] Executing state service.mod_watch for [haproxy]
2018-10-10 21:52:16,157 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-10 21:52:16,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25475] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-10-10 21:52:16,213 [salt.state       :290 ][INFO    ][25475] {'haproxy': True}
2018-10-10 21:52:16,213 [salt.state       :1941][INFO    ][25475] Completed state [haproxy] at time 21:52:16.213535 duration_in_ms=57.515
2018-10-10 21:52:16,220 [salt.minion      :1708][INFO    ][25475] Returning information for job: 20181010215154105761
2018-10-10 21:52:17,950 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command service.status with jid 20181010215217940541
2018-10-10 21:52:17,974 [salt.minion      :1431][INFO    ][26672] Starting a new job with PID 26672
2018-10-10 21:52:18,553 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][26672] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-10 21:52:18,581 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][26672] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-10 21:52:18,607 [salt.minion      :1708][INFO    ][26672] Returning information for job: 20181010215217940541
2018-10-10 21:52:19,964 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command service.restart with jid 20181010215219955690
2018-10-10 21:52:19,993 [salt.minion      :1431][INFO    ][26680] Starting a new job with PID 26680
2018-10-10 21:52:20,563 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][26680] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-10 21:52:20,609 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][26680] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-10 21:52:20,658 [salt.minion      :1708][INFO    ][26680] Returning information for job: 20181010215219955690
2018-10-10 22:11:09,981 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command test.ping with jid 20181010221109972333
2018-10-10 22:11:10,010 [salt.minion      :1431][INFO    ][26757] Starting a new job with PID 26757
2018-10-10 22:11:10,042 [salt.minion      :1708][INFO    ][26757] Returning information for job: 20181010221109972333
2018-10-10 22:12:10,690 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.sls with jid 20181010221210677223
2018-10-10 22:12:10,711 [salt.minion      :1431][INFO    ][26762] Starting a new job with PID 26762
2018-10-10 22:12:11,672 [salt.state       :905 ][INFO    ][26762] Loading fresh modules for state activity
2018-10-10 22:12:12,726 [salt.state       :1770][INFO    ][26762] Running state [keepalived] at time 22:12:12.726460
2018-10-10 22:12:12,727 [salt.state       :1803][INFO    ][26762] Executing state pkg.installed for [keepalived]
2018-10-10 22:12:12,728 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26762] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:12:13,287 [salt.state       :290 ][INFO    ][26762] All specified packages are already installed
2018-10-10 22:12:13,288 [salt.state       :1941][INFO    ][26762] Completed state [keepalived] at time 22:12:13.288160 duration_in_ms=561.702
2018-10-10 22:12:13,288 [salt.state       :1770][INFO    ][26762] Running state [lsof] at time 22:12:13.288775
2018-10-10 22:12:13,289 [salt.state       :1803][INFO    ][26762] Executing state pkg.installed for [lsof]
2018-10-10 22:12:13,300 [salt.state       :290 ][INFO    ][26762] All specified packages are already installed
2018-10-10 22:12:13,301 [salt.state       :1941][INFO    ][26762] Completed state [lsof] at time 22:12:13.301026 duration_in_ms=12.251
2018-10-10 22:12:13,305 [salt.state       :1770][INFO    ][26762] Running state [/etc/keepalived/keepalived.conf] at time 22:12:13.305898
2018-10-10 22:12:13,306 [salt.state       :1803][INFO    ][26762] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-10 22:12:13,391 [salt.state       :290 ][INFO    ][26762] File /etc/keepalived/keepalived.conf is in the correct state
2018-10-10 22:12:13,392 [salt.state       :1941][INFO    ][26762] Completed state [/etc/keepalived/keepalived.conf] at time 22:12:13.392469 duration_in_ms=86.571
2018-10-10 22:12:13,394 [salt.state       :1770][INFO    ][26762] Running state [keepalived] at time 22:12:13.394246
2018-10-10 22:12:13,394 [salt.state       :1803][INFO    ][26762] Executing state service.running for [keepalived]
2018-10-10 22:12:13,396 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26762] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-10 22:12:13,443 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26762] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-10 22:12:13,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26762] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-10 22:12:13,486 [salt.state       :290 ][INFO    ][26762] The service keepalived is already running
2018-10-10 22:12:13,487 [salt.state       :1941][INFO    ][26762] Completed state [keepalived] at time 22:12:13.487737 duration_in_ms=93.49
2018-10-10 22:12:13,491 [salt.minion      :1708][INFO    ][26762] Returning information for job: 20181010221210677223
2018-10-10 22:12:16,818 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command pillar.get with jid 20181010221216809302
2018-10-10 22:12:16,845 [salt.minion      :1431][INFO    ][26788] Starting a new job with PID 26788
2018-10-10 22:12:16,860 [salt.minion      :1708][INFO    ][26788] Returning information for job: 20181010221216809302
2018-10-10 22:14:56,731 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.sls with jid 20181010221456720137
2018-10-10 22:14:56,755 [salt.minion      :1431][INFO    ][26804] Starting a new job with PID 26804
2018-10-10 22:14:57,787 [salt.state       :905 ][INFO    ][26804] Loading fresh modules for state activity
2018-10-10 22:15:00,399 [salt.state       :1770][INFO    ][26804] Running state [memcached] at time 22:15:00.399061
2018-10-10 22:15:00,400 [salt.state       :1803][INFO    ][26804] Executing state pkg.installed for [memcached]
2018-10-10 22:15:00,401 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26804] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:15:00,879 [salt.state       :290 ][INFO    ][26804] All specified packages are already installed
2018-10-10 22:15:00,880 [salt.state       :1941][INFO    ][26804] Completed state [memcached] at time 22:15:00.880838 duration_in_ms=481.778
2018-10-10 22:15:00,881 [salt.state       :1770][INFO    ][26804] Running state [python-memcache] at time 22:15:00.881783
2018-10-10 22:15:00,882 [salt.state       :1803][INFO    ][26804] Executing state pkg.installed for [python-memcache]
2018-10-10 22:15:00,893 [salt.state       :290 ][INFO    ][26804] All specified packages are already installed
2018-10-10 22:15:00,893 [salt.state       :1941][INFO    ][26804] Completed state [python-memcache] at time 22:15:00.893549 duration_in_ms=11.766
2018-10-10 22:15:00,899 [salt.state       :1770][INFO    ][26804] Running state [/etc/memcached.conf] at time 22:15:00.899209
2018-10-10 22:15:00,899 [salt.state       :1803][INFO    ][26804] Executing state file.managed for [/etc/memcached.conf]
2018-10-10 22:15:00,966 [salt.state       :290 ][INFO    ][26804] File /etc/memcached.conf is in the correct state
2018-10-10 22:15:00,967 [salt.state       :1941][INFO    ][26804] Completed state [/etc/memcached.conf] at time 22:15:00.966981 duration_in_ms=67.772
2018-10-10 22:15:00,968 [salt.state       :1770][INFO    ][26804] Running state [memcached] at time 22:15:00.968523
2018-10-10 22:15:00,968 [salt.state       :1803][INFO    ][26804] Executing state service.running for [memcached]
2018-10-10 22:15:00,969 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26804] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-10 22:15:01,016 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26804] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-10 22:15:01,035 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26804] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-10 22:15:01,053 [salt.state       :290 ][INFO    ][26804] The service memcached is already running
2018-10-10 22:15:01,053 [salt.state       :1941][INFO    ][26804] Completed state [memcached] at time 22:15:01.053821 duration_in_ms=85.297
2018-10-10 22:15:01,057 [salt.minion      :1708][INFO    ][26804] Returning information for job: 20181010221456720137
2018-10-10 22:15:03,286 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.sls with jid 20181010221503277569
2018-10-10 22:15:03,312 [salt.minion      :1431][INFO    ][26830] Starting a new job with PID 26830
2018-10-10 22:15:09,643 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010221509631889
2018-10-10 22:15:09,675 [salt.minion      :1431][INFO    ][26835] Starting a new job with PID 26835
2018-10-10 22:15:09,700 [salt.minion      :1708][INFO    ][26835] Returning information for job: 20181010221509631889
2018-10-10 22:15:11,649 [salt.state       :905 ][INFO    ][26830] Loading fresh modules for state activity
2018-10-10 22:15:13,220 [salt.state       :1770][INFO    ][26830] Running state [haproxy] at time 22:15:13.220619
2018-10-10 22:15:13,221 [salt.state       :1803][INFO    ][26830] Executing state pkg.installed for [haproxy]
2018-10-10 22:15:13,223 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26830] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:15:13,716 [salt.state       :290 ][INFO    ][26830] All specified packages are already installed
2018-10-10 22:15:13,716 [salt.state       :1941][INFO    ][26830] Completed state [haproxy] at time 22:15:13.716800 duration_in_ms=496.181
2018-10-10 22:15:13,721 [salt.state       :1770][INFO    ][26830] Running state [/etc/default/haproxy] at time 22:15:13.721208
2018-10-10 22:15:13,721 [salt.state       :1803][INFO    ][26830] Executing state file.managed for [/etc/default/haproxy]
2018-10-10 22:15:13,741 [salt.state       :290 ][INFO    ][26830] File /etc/default/haproxy is in the correct state
2018-10-10 22:15:13,741 [salt.state       :1941][INFO    ][26830] Completed state [/etc/default/haproxy] at time 22:15:13.741634 duration_in_ms=20.426
2018-10-10 22:15:13,742 [salt.state       :1770][INFO    ][26830] Running state [/etc/haproxy/haproxy.cfg] at time 22:15:13.741980
2018-10-10 22:15:13,742 [salt.state       :1803][INFO    ][26830] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-10 22:15:13,953 [salt.state       :290 ][INFO    ][26830] File /etc/haproxy/haproxy.cfg is in the correct state
2018-10-10 22:15:13,954 [salt.state       :1941][INFO    ][26830] Completed state [/etc/haproxy/haproxy.cfg] at time 22:15:13.954496 duration_in_ms=212.515
2018-10-10 22:15:13,955 [salt.state       :1770][INFO    ][26830] Running state [/etc/haproxy/ssl] at time 22:15:13.954870
2018-10-10 22:15:13,955 [salt.state       :1803][INFO    ][26830] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-10 22:15:13,957 [salt.state       :290 ][INFO    ][26830] Directory /etc/haproxy/ssl is in the correct state
Directory /etc/haproxy/ssl updated
2018-10-10 22:15:13,957 [salt.state       :1941][INFO    ][26830] Completed state [/etc/haproxy/ssl] at time 22:15:13.957803 duration_in_ms=2.933
2018-10-10 22:15:13,958 [salt.state       :1770][INFO    ][26830] Running state [/etc/haproxy/errors/429.http11] at time 22:15:13.958129
2018-10-10 22:15:13,958 [salt.state       :1803][INFO    ][26830] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-10 22:15:13,979 [salt.state       :290 ][INFO    ][26830] File /etc/haproxy/errors/429.http11 is in the correct state
2018-10-10 22:15:13,979 [salt.state       :1941][INFO    ][26830] Completed state [/etc/haproxy/errors/429.http11] at time 22:15:13.979715 duration_in_ms=21.585
2018-10-10 22:15:13,980 [salt.state       :1770][INFO    ][26830] Running state [haproxy_status_packages] at time 22:15:13.980414
2018-10-10 22:15:13,980 [salt.state       :1803][INFO    ][26830] Executing state pkg.installed for [haproxy_status_packages]
2018-10-10 22:15:13,990 [salt.state       :290 ][INFO    ][26830] All specified packages are already installed
2018-10-10 22:15:13,990 [salt.state       :1941][INFO    ][26830] Completed state [haproxy_status_packages] at time 22:15:13.990933 duration_in_ms=10.52
2018-10-10 22:15:13,991 [salt.state       :1770][INFO    ][26830] Running state [/usr/bin/haproxy-status.sh] at time 22:15:13.991476
2018-10-10 22:15:13,991 [salt.state       :1803][INFO    ][26830] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-10 22:15:14,028 [salt.state       :290 ][INFO    ][26830] File /usr/bin/haproxy-status.sh is in the correct state
2018-10-10 22:15:14,028 [salt.state       :1941][INFO    ][26830] Completed state [/usr/bin/haproxy-status.sh] at time 22:15:14.028715 duration_in_ms=37.239
2018-10-10 22:15:14,029 [salt.state       :1770][INFO    ][26830] Running state [net.ipv4.ip_nonlocal_bind] at time 22:15:14.029606
2018-10-10 22:15:14,029 [salt.state       :1803][INFO    ][26830] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-10 22:15:14,045 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26830] Executing command 'sysctl -n net.ipv4.ip_nonlocal_bind' in directory '/root'
2018-10-10 22:15:14,062 [salt.state       :290 ][INFO    ][26830] Sysctl value net.ipv4.ip_nonlocal_bind = 1 is already set
2018-10-10 22:15:14,062 [salt.state       :1941][INFO    ][26830] Completed state [net.ipv4.ip_nonlocal_bind] at time 22:15:14.062564 duration_in_ms=32.958
2018-10-10 22:15:14,065 [salt.state       :1770][INFO    ][26830] Running state [haproxy] at time 22:15:14.065055
2018-10-10 22:15:14,065 [salt.state       :1803][INFO    ][26830] Executing state service.running for [haproxy]
2018-10-10 22:15:14,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26830] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-10 22:15:14,087 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26830] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-10 22:15:14,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26830] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-10 22:15:14,129 [salt.state       :290 ][INFO    ][26830] The service haproxy is already running
2018-10-10 22:15:14,130 [salt.state       :1941][INFO    ][26830] Completed state [haproxy] at time 22:15:14.130301 duration_in_ms=65.245
2018-10-10 22:15:14,133 [salt.minion      :1708][INFO    ][26830] Returning information for job: 20181010221503277569
2018-10-10 22:15:16,647 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command service.status with jid 20181010221516636430
2018-10-10 22:15:16,670 [salt.minion      :1431][INFO    ][26866] Starting a new job with PID 26866
2018-10-10 22:15:17,254 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][26866] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-10 22:15:17,276 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][26866] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-10 22:15:17,298 [salt.minion      :1708][INFO    ][26866] Returning information for job: 20181010221516636430
2018-10-10 22:15:19,255 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command service.restart with jid 20181010221519246152
2018-10-10 22:15:19,280 [salt.minion      :1431][INFO    ][26874] Starting a new job with PID 26874
2018-10-10 22:15:19,857 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][26874] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-10 22:15:19,898 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][26874] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-10 22:15:19,949 [salt.minion      :1708][INFO    ][26874] Returning information for job: 20181010221519246152
2018-10-10 22:30:36,231 [salt.utils.schedule:1375][INFO    ][2952] Running scheduled job: __mine_interval
2018-10-10 22:40:30,530 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.sls with jid 20181010224030523852
2018-10-10 22:40:30,561 [salt.minion      :1431][INFO    ][26997] Starting a new job with PID 26997
2018-10-10 22:40:35,628 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224035615399
2018-10-10 22:40:35,651 [salt.minion      :1431][INFO    ][27002] Starting a new job with PID 27002
2018-10-10 22:40:35,682 [salt.minion      :1708][INFO    ][27002] Returning information for job: 20181010224035615399
2018-10-10 22:40:37,578 [salt.state       :905 ][INFO    ][26997] Loading fresh modules for state activity
2018-10-10 22:40:37,645 [salt.fileclient  :1215][INFO    ][26997] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-10-10 22:40:37,687 [salt.fileclient  :1215][INFO    ][26997] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-10-10 22:40:37,722 [salt.fileclient  :1215][INFO    ][26997] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-10-10 22:40:37,772 [salt.fileclient  :1215][INFO    ][26997] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-10-10 22:40:38,736 [salt.state       :1770][INFO    ][26997] Running state [redis-server] at time 22:40:38.736721
2018-10-10 22:40:38,737 [salt.state       :1803][INFO    ][26997] Executing state pkg.installed for [redis-server]
2018-10-10 22:40:38,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:40:39,292 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-10-10 22:40:39,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-10 22:40:41,919 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:40:41,961 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-10-10 22:40:45,777 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224045764233
2018-10-10 22:40:45,794 [salt.minion      :1431][INFO    ][27826] Starting a new job with PID 27826
2018-10-10 22:40:45,819 [salt.minion      :1708][INFO    ][27826] Returning information for job: 20181010224045764233
2018-10-10 22:40:46,525 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:40:46,582 [salt.state       :290 ][INFO    ][26997] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-10-10 22:40:46,610 [salt.state       :905 ][INFO    ][26997] Loading fresh modules for state activity
2018-10-10 22:40:46,662 [salt.state       :1941][INFO    ][26997] Completed state [redis-server] at time 22:40:46.662095 duration_in_ms=7925.374
2018-10-10 22:40:46,667 [salt.state       :1770][INFO    ][26997] Running state [vm.overcommit_memory] at time 22:40:46.667906
2018-10-10 22:40:46,668 [salt.state       :1803][INFO    ][26997] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-10 22:40:46,673 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-10-10 22:40:46,694 [salt.state       :290 ][INFO    ][26997] {'vm.overcommit_memory': 1}
2018-10-10 22:40:46,695 [salt.state       :1941][INFO    ][26997] Completed state [vm.overcommit_memory] at time 22:40:46.695303 duration_in_ms=27.397
2018-10-10 22:40:46,699 [salt.state       :1770][INFO    ][26997] Running state [/etc/redis/redis.conf] at time 22:40:46.699593
2018-10-10 22:40:46,699 [salt.state       :1803][INFO    ][26997] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-10 22:40:46,741 [salt.fileclient  :1215][INFO    ][26997] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-10-10 22:40:46,828 [salt.state       :290 ][INFO    ][26997] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.34
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -208,6 +208,7 @@
 #    and resynchronize with them.
 #
 # slaveof <masterip> <masterport>
+slaveof 192.168.10.32 6379
 
 # If the master is password protected (using the "requirepass" configuration
 # directive below) it is possible to tell the slave to authenticate before
@@ -505,7 +506,6 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
 appendonly no
 
 # The name of the append only file (default: "appendonly.aof")
@@ -535,9 +535,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-10-10 22:40:46,828 [salt.state       :1941][INFO    ][26997] Completed state [/etc/redis/redis.conf] at time 22:40:46.828729 duration_in_ms=129.136
2018-10-10 22:40:47,427 [salt.state       :1770][INFO    ][26997] Running state [redis-server] at time 22:40:47.427007
2018-10-10 22:40:47,427 [salt.state       :1803][INFO    ][26997] Executing state service.running for [redis-server]
2018-10-10 22:40:47,428 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-10 22:40:47,457 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-10 22:40:47,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-10 22:40:47,505 [salt.state       :290 ][INFO    ][26997] The service redis-server is already running
2018-10-10 22:40:47,506 [salt.state       :1941][INFO    ][26997] Completed state [redis-server] at time 22:40:47.506546 duration_in_ms=79.539
2018-10-10 22:40:47,506 [salt.state       :1770][INFO    ][26997] Running state [redis-server] at time 22:40:47.506865
2018-10-10 22:40:47,507 [salt.state       :1803][INFO    ][26997] Executing state service.mod_watch for [redis-server]
2018-10-10 22:40:47,509 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-10 22:40:47,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-10-10 22:40:47,806 [salt.state       :290 ][INFO    ][26997] {'redis-server': True}
2018-10-10 22:40:47,808 [salt.state       :1941][INFO    ][26997] Completed state [redis-server] at time 22:40:47.808637 duration_in_ms=301.771
2018-10-10 22:40:47,813 [salt.state       :1770][INFO    ][26997] Running state [redis-sentinel] at time 22:40:47.813687
2018-10-10 22:40:47,814 [salt.state       :1803][INFO    ][26997] Executing state pkg.installed for [redis-sentinel]
2018-10-10 22:40:48,123 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:40:48,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-10-10 22:40:52,174 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:40:52,223 [salt.state       :290 ][INFO    ][26997] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-10-10 22:40:52,246 [salt.state       :905 ][INFO    ][26997] Loading fresh modules for state activity
2018-10-10 22:40:52,297 [salt.state       :1941][INFO    ][26997] Completed state [redis-sentinel] at time 22:40:52.297267 duration_in_ms=4483.578
2018-10-10 22:40:52,989 [salt.state       :1770][INFO    ][26997] Running state [/etc/redis/sentinel.conf] at time 22:40:52.989017
2018-10-10 22:40:52,990 [salt.state       :1803][INFO    ][26997] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-10 22:40:53,010 [salt.fileclient  :1215][INFO    ][26997] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-10-10 22:40:53,058 [salt.state       :290 ][INFO    ][26997] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.34
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-10-10 22:40:53,060 [salt.state       :1941][INFO    ][26997] Completed state [/etc/redis/sentinel.conf] at time 22:40:53.060270 duration_in_ms=71.253
2018-10-10 22:40:53,060 [salt.state       :1770][INFO    ][26997] Running state [redis-sentinel] at time 22:40:53.060692
2018-10-10 22:40:53,060 [salt.state       :1803][INFO    ][26997] Executing state service.running for [redis-sentinel]
2018-10-10 22:40:53,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-10 22:40:53,088 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-10 22:40:53,111 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-10 22:40:53,132 [salt.state       :290 ][INFO    ][26997] The service redis-sentinel is already running
2018-10-10 22:40:53,133 [salt.state       :1941][INFO    ][26997] Completed state [redis-sentinel] at time 22:40:53.133053 duration_in_ms=72.36
2018-10-10 22:40:53,133 [salt.state       :1770][INFO    ][26997] Running state [redis-sentinel] at time 22:40:53.133371
2018-10-10 22:40:53,133 [salt.state       :1803][INFO    ][26997] Executing state service.mod_watch for [redis-sentinel]
2018-10-10 22:40:53,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-10 22:40:53,160 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26997] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-10-10 22:40:53,449 [salt.state       :290 ][INFO    ][26997] {'redis-sentinel': True}
2018-10-10 22:40:53,451 [salt.state       :1941][INFO    ][26997] Completed state [redis-sentinel] at time 22:40:53.451742 duration_in_ms=318.37
2018-10-10 22:40:53,458 [salt.minion      :1708][INFO    ][26997] Returning information for job: 20181010224030523852
2018-10-10 22:40:54,152 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command test.ping with jid 20181010224054142507
2018-10-10 22:40:54,178 [salt.minion      :1431][INFO    ][28304] Starting a new job with PID 28304
2018-10-10 22:40:54,204 [salt.minion      :1708][INFO    ][28304] Returning information for job: 20181010224054142507
2018-10-10 22:44:06,174 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.sls with jid 20181010224406162342
2018-10-10 22:44:06,196 [salt.minion      :1431][INFO    ][28309] Starting a new job with PID 28309
2018-10-10 22:44:11,296 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224411285390
2018-10-10 22:44:11,321 [salt.minion      :1431][INFO    ][28314] Starting a new job with PID 28314
2018-10-10 22:44:11,349 [salt.minion      :1708][INFO    ][28314] Returning information for job: 20181010224411285390
2018-10-10 22:44:12,377 [salt.state       :905 ][INFO    ][28309] Loading fresh modules for state activity
2018-10-10 22:44:12,445 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-10-10 22:44:12,485 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-10-10 22:44:12,578 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-10-10 22:44:12,620 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-10-10 22:44:12,653 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-10-10 22:44:12,761 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-10-10 22:44:12,853 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-10-10 22:44:12,955 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-10-10 22:44:13,140 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-10-10 22:44:13,229 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-10-10 22:44:13,317 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-10-10 22:44:13,383 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-10-10 22:44:14,363 [salt.state       :1770][INFO    ][28309] Running state [apache2] at time 22:44:14.363831
2018-10-10 22:44:14,364 [salt.state       :1803][INFO    ][28309] Executing state pkg.installed for [apache2]
2018-10-10 22:44:14,366 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:44:14,929 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-10-10 22:44:15,118 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-10 22:44:17,542 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:44:17,581 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-10-10 22:44:21,374 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224421362637
2018-10-10 22:44:21,397 [salt.minion      :1431][INFO    ][29319] Starting a new job with PID 29319
2018-10-10 22:44:21,425 [salt.minion      :1708][INFO    ][29319] Returning information for job: 20181010224421362637
2018-10-10 22:44:26,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:44:26,980 [salt.state       :290 ][INFO    ][28309] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-10-10 22:44:27,012 [salt.state       :905 ][INFO    ][28309] Loading fresh modules for state activity
2018-10-10 22:44:27,065 [salt.state       :1941][INFO    ][28309] Completed state [apache2] at time 22:44:27.065280 duration_in_ms=12701.45
2018-10-10 22:44:27,071 [salt.state       :1770][INFO    ][28309] Running state [openssl] at time 22:44:27.071890
2018-10-10 22:44:27,072 [salt.state       :1803][INFO    ][28309] Executing state pkg.installed for [openssl]
2018-10-10 22:44:28,026 [salt.state       :290 ][INFO    ][28309] All specified packages are already installed
2018-10-10 22:44:28,026 [salt.state       :1941][INFO    ][28309] Completed state [openssl] at time 22:44:28.026856 duration_in_ms=954.965
2018-10-10 22:44:28,029 [salt.state       :1770][INFO    ][28309] Running state [a2enmod rewrite] at time 22:44:28.029794
2018-10-10 22:44:28,030 [salt.state       :1803][INFO    ][28309] Executing state cmd.run for [a2enmod rewrite]
2018-10-10 22:44:28,030 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command 'a2enmod rewrite' in directory '/root'
2018-10-10 22:44:28,105 [salt.state       :290 ][INFO    ][28309] {'pid': 29834, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-10 22:44:28,105 [salt.state       :1941][INFO    ][28309] Completed state [a2enmod rewrite] at time 22:44:28.105730 duration_in_ms=75.936
2018-10-10 22:44:28,106 [salt.state       :1770][INFO    ][28309] Running state [libapache2-mod-wsgi] at time 22:44:28.106730
2018-10-10 22:44:28,107 [salt.state       :1803][INFO    ][28309] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-10 22:44:28,143 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:44:28,178 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-10-10 22:44:31,517 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224431506757
2018-10-10 22:44:31,543 [salt.minion      :1431][INFO    ][30100] Starting a new job with PID 30100
2018-10-10 22:44:31,569 [salt.minion      :1708][INFO    ][30100] Returning information for job: 20181010224431506757
2018-10-10 22:44:33,519 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:44:33,577 [salt.state       :290 ][INFO    ][28309] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-10-10 22:44:33,601 [salt.state       :905 ][INFO    ][28309] Loading fresh modules for state activity
2018-10-10 22:44:33,658 [salt.state       :1941][INFO    ][28309] Completed state [libapache2-mod-wsgi] at time 22:44:33.657932 duration_in_ms=5551.201
2018-10-10 22:44:33,661 [salt.state       :1770][INFO    ][28309] Running state [a2enmod wsgi] at time 22:44:33.661854
2018-10-10 22:44:33,662 [salt.state       :1803][INFO    ][28309] Executing state cmd.run for [a2enmod wsgi]
2018-10-10 22:44:33,662 [salt.state       :290 ][INFO    ][28309] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-10 22:44:33,662 [salt.state       :1941][INFO    ][28309] Completed state [a2enmod wsgi] at time 22:44:33.662806 duration_in_ms=0.952
2018-10-10 22:44:33,668 [salt.state       :1770][INFO    ][28309] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:44:33.668025
2018-10-10 22:44:33,668 [salt.state       :1803][INFO    ][28309] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-10 22:44:33,710 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-10-10 22:44:33,780 [salt.state       :290 ][INFO    ][28309] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-10-10 22:44:33,780 [salt.state       :1941][INFO    ][28309] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:44:33.780450 duration_in_ms=112.424
2018-10-10 22:44:33,780 [salt.state       :1770][INFO    ][28309] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:44:33.780713
2018-10-10 22:44:33,780 [salt.state       :1803][INFO    ][28309] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-10 22:44:33,781 [salt.state       :290 ][INFO    ][28309] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-10 22:44:33,781 [salt.state       :1941][INFO    ][28309] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:44:33.781881 duration_in_ms=1.168
2018-10-10 22:44:33,782 [salt.state       :1770][INFO    ][28309] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:44:33.782114
2018-10-10 22:44:33,782 [salt.state       :1803][INFO    ][28309] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-10 22:44:33,782 [salt.state       :290 ][INFO    ][28309] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-10-10 22:44:33,782 [salt.state       :1941][INFO    ][28309] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:44:33.782867 duration_in_ms=0.753
2018-10-10 22:44:33,784 [salt.state       :1770][INFO    ][28309] Running state [a2enmod mpm_prefork] at time 22:44:33.784351
2018-10-10 22:44:33,784 [salt.state       :1803][INFO    ][28309] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-10 22:44:33,788 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-10-10 22:44:33,853 [salt.state       :290 ][INFO    ][28309] {'pid': 30167, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-10 22:44:33,853 [salt.state       :1941][INFO    ][28309] Completed state [a2enmod mpm_prefork] at time 22:44:33.853515 duration_in_ms=69.164
2018-10-10 22:44:33,854 [salt.state       :1770][INFO    ][28309] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:44:33.854035
2018-10-10 22:44:33,854 [salt.state       :1803][INFO    ][28309] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-10 22:44:33,854 [salt.state       :290 ][INFO    ][28309] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-10 22:44:33,855 [salt.state       :1941][INFO    ][28309] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:44:33.855142 duration_in_ms=1.107
2018-10-10 22:44:33,855 [salt.state       :1770][INFO    ][28309] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:44:33.855407
2018-10-10 22:44:33,855 [salt.state       :1803][INFO    ][28309] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-10 22:44:33,856 [salt.state       :290 ][INFO    ][28309] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-10-10 22:44:33,856 [salt.state       :1941][INFO    ][28309] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:44:33.856302 duration_in_ms=0.895
2018-10-10 22:44:33,859 [salt.state       :1770][INFO    ][28309] Running state [apache_server_service_task] at time 22:44:33.859708
2018-10-10 22:44:33,860 [salt.state       :1803][INFO    ][28309] Executing state test.show_notification for [apache_server_service_task]
2018-10-10 22:44:33,860 [salt.state       :290 ][INFO    ][28309] Running apache.server.service
2018-10-10 22:44:33,860 [salt.state       :1941][INFO    ][28309] Completed state [apache_server_service_task] at time 22:44:33.860500 duration_in_ms=1.116
2018-10-10 22:44:33,861 [salt.state       :1770][INFO    ][28309] Running state [/etc/apache2/ports.conf] at time 22:44:33.861105
2018-10-10 22:44:33,861 [salt.state       :1803][INFO    ][28309] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-10 22:44:33,882 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-10-10 22:44:33,948 [salt.state       :290 ][INFO    ][28309] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-10-10 22:44:33,949 [salt.state       :1941][INFO    ][28309] Completed state [/etc/apache2/ports.conf] at time 22:44:33.949078 duration_in_ms=87.973
2018-10-10 22:44:33,949 [salt.state       :1770][INFO    ][28309] Running state [/etc/apache2/conf-available/security.conf] at time 22:44:33.949588
2018-10-10 22:44:33,949 [salt.state       :1803][INFO    ][28309] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-10 22:44:33,964 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-10-10 22:44:34,029 [salt.state       :290 ][INFO    ][28309] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-10-10 22:44:34,030 [salt.state       :1941][INFO    ][28309] Completed state [/etc/apache2/conf-available/security.conf] at time 22:44:34.030150 duration_in_ms=80.562
2018-10-10 22:44:34,668 [salt.state       :1770][INFO    ][28309] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 22:44:34.668602
2018-10-10 22:44:34,669 [salt.state       :1803][INFO    ][28309] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-10 22:44:34,670 [salt.state       :290 ][INFO    ][28309] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-10-10 22:44:34,670 [salt.state       :1941][INFO    ][28309] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 22:44:34.670906 duration_in_ms=2.307
2018-10-10 22:44:34,671 [salt.state       :1770][INFO    ][28309] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:44:34.671402
2018-10-10 22:44:34,671 [salt.state       :1803][INFO    ][28309] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-10 22:44:34,693 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-10-10 22:44:34,732 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-10-10 22:44:34,817 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-10-10 22:44:34,844 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-10-10 22:44:34,949 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-10-10 22:44:34,974 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-10-10 22:44:35,005 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-10-10 22:44:35,024 [salt.state       :290 ][INFO    ][28309] File changed:
New file
2018-10-10 22:44:35,024 [salt.state       :1941][INFO    ][28309] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:44:35.024553 duration_in_ms=353.151
2018-10-10 22:44:35,025 [salt.state       :1770][INFO    ][28309] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:44:35.025051
2018-10-10 22:44:35,025 [salt.state       :1803][INFO    ][28309] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-10 22:44:35,284 [salt.state       :290 ][INFO    ][28309] File changed:
New file
2018-10-10 22:44:35,285 [salt.state       :1941][INFO    ][28309] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:44:35.285097 duration_in_ms=260.046
2018-10-10 22:44:35,288 [salt.state       :1770][INFO    ][28309] Running state [apache2] at time 22:44:35.288103
2018-10-10 22:44:35,288 [salt.state       :1803][INFO    ][28309] Executing state service.running for [apache2]
2018-10-10 22:44:35,289 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-10 22:44:35,322 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-10 22:44:35,352 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-10 22:44:35,376 [salt.state       :290 ][INFO    ][28309] The service apache2 is already running
2018-10-10 22:44:35,378 [salt.state       :1941][INFO    ][28309] Completed state [apache2] at time 22:44:35.377822 duration_in_ms=89.719
2018-10-10 22:44:35,378 [salt.state       :1770][INFO    ][28309] Running state [apache2] at time 22:44:35.378835
2018-10-10 22:44:35,379 [salt.state       :1803][INFO    ][28309] Executing state service.mod_watch for [apache2]
2018-10-10 22:44:35,380 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-10 22:44:35,404 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-10-10 22:44:35,601 [salt.state       :290 ][INFO    ][28309] {'apache2': True}
2018-10-10 22:44:35,602 [salt.state       :1941][INFO    ][28309] Completed state [apache2] at time 22:44:35.602425 duration_in_ms=223.59
2018-10-10 22:44:35,604 [salt.state       :1770][INFO    ][28309] Running state [/etc/apache2/conf-enabled/security.conf] at time 22:44:35.604139
2018-10-10 22:44:35,604 [salt.state       :1803][INFO    ][28309] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-10 22:44:35,618 [salt.state       :290 ][INFO    ][28309] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-10-10 22:44:35,619 [salt.state       :1941][INFO    ][28309] Completed state [/etc/apache2/conf-enabled/security.conf] at time 22:44:35.619512 duration_in_ms=15.373
2018-10-10 22:44:35,625 [salt.state       :1770][INFO    ][28309] Running state [gnocchi-common] at time 22:44:35.625196
2018-10-10 22:44:35,625 [salt.state       :1803][INFO    ][28309] Executing state pkg.installed for [gnocchi-common]
2018-10-10 22:44:35,945 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:44:35,981 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-10-10 22:44:41,662 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224441653716
2018-10-10 22:44:41,682 [salt.minion      :1431][INFO    ][30715] Starting a new job with PID 30715
2018-10-10 22:44:41,704 [salt.minion      :1708][INFO    ][30715] Returning information for job: 20181010224441653716
2018-10-10 22:44:51,791 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224451781243
2018-10-10 22:44:51,808 [salt.minion      :1431][INFO    ][32239] Starting a new job with PID 32239
2018-10-10 22:44:51,832 [salt.minion      :1708][INFO    ][32239] Returning information for job: 20181010224451781243
2018-10-10 22:45:01,925 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224501915011
2018-10-10 22:45:01,945 [salt.minion      :1431][INFO    ][32654] Starting a new job with PID 32654
2018-10-10 22:45:01,974 [salt.minion      :1708][INFO    ][32654] Returning information for job: 20181010224501915011
2018-10-10 22:45:12,061 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224512052378
2018-10-10 22:45:12,083 [salt.minion      :1431][INFO    ][649] Starting a new job with PID 649
2018-10-10 22:45:12,107 [salt.minion      :1708][INFO    ][649] Returning information for job: 20181010224512052378
2018-10-10 22:45:18,394 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:45:18,459 [salt.state       :290 ][INFO    ][28309] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp4'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.3-1.0~u16.04+mcp16'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp5'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp9'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-10-10 22:45:18,486 [salt.state       :905 ][INFO    ][28309] Loading fresh modules for state activity
2018-10-10 22:45:18,536 [salt.state       :1941][INFO    ][28309] Completed state [gnocchi-common] at time 22:45:18.536113 duration_in_ms=42910.917
2018-10-10 22:45:18,540 [salt.state       :1770][INFO    ][28309] Running state [gnocchi_ssl_mysql] at time 22:45:18.540921
2018-10-10 22:45:18,541 [salt.state       :1803][INFO    ][28309] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-10-10 22:45:18,541 [salt.state       :290 ][INFO    ][28309] Running gnocchi._ssl.mysql
2018-10-10 22:45:18,541 [salt.state       :1941][INFO    ][28309] Completed state [gnocchi_ssl_mysql] at time 22:45:18.541789 duration_in_ms=0.868
2018-10-10 22:45:18,544 [salt.state       :1770][INFO    ][28309] Running state [/etc/gnocchi/gnocchi.conf] at time 22:45:18.544013
2018-10-10 22:45:18,544 [salt.state       :1803][INFO    ][28309] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-10-10 22:45:18,574 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-10-10 22:45:18,695 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-10-10 22:45:18,710 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-10-10 22:45:18,741 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-10-10 22:45:18,784 [salt.fileclient  :1215][INFO    ][28309] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-10-10 22:45:18,794 [salt.state       :290 ][INFO    ][28309] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -515,153 +316,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +480,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.34:6379

2018-10-10 22:45:18,796 [salt.state       :1941][INFO    ][28309] Completed state [/etc/gnocchi/gnocchi.conf] at time 22:45:18.796274 duration_in_ms=252.26
2018-10-10 22:45:18,801 [salt.state       :1770][INFO    ][28309] Running state [gnocchi-api] at time 22:45:18.801044
2018-10-10 22:45:18,801 [salt.state       :1803][INFO    ][28309] Executing state pkg.installed for [gnocchi-api]
2018-10-10 22:45:20,693 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:45:20,737 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-10-10 22:45:22,196 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224522188233
2018-10-10 22:45:22,224 [salt.minion      :1431][INFO    ][1025] Starting a new job with PID 1025
2018-10-10 22:45:22,251 [salt.minion      :1708][INFO    ][1025] Returning information for job: 20181010224522188233
2018-10-10 22:45:31,179 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:45:31,253 [salt.state       :290 ][INFO    ][28309] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp13'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-10-10 22:45:31,291 [salt.state       :905 ][INFO    ][28309] Loading fresh modules for state activity
2018-10-10 22:45:31,350 [salt.state       :1941][INFO    ][28309] Completed state [gnocchi-api] at time 22:45:31.349917 duration_in_ms=12548.872
2018-10-10 22:45:31,356 [salt.state       :1770][INFO    ][28309] Running state [gnocchi-metricd] at time 22:45:31.356705
2018-10-10 22:45:31,357 [salt.state       :1803][INFO    ][28309] Executing state pkg.installed for [gnocchi-metricd]
2018-10-10 22:45:32,340 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224532332982
2018-10-10 22:45:32,362 [salt.minion      :1431][INFO    ][1876] Starting a new job with PID 1876
2018-10-10 22:45:32,383 [salt.minion      :1708][INFO    ][1876] Returning information for job: 20181010224532332982
2018-10-10 22:45:32,787 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:45:32,826 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-10-10 22:45:36,257 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:45:36,326 [salt.state       :290 ][INFO    ][28309] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-10-10 22:45:36,373 [salt.state       :905 ][INFO    ][28309] Loading fresh modules for state activity
2018-10-10 22:45:36,616 [salt.state       :1941][INFO    ][28309] Completed state [gnocchi-metricd] at time 22:45:36.615578 duration_in_ms=5258.872
2018-10-10 22:45:36,623 [salt.state       :1770][INFO    ][28309] Running state [python-memcache] at time 22:45:36.623037
2018-10-10 22:45:36,623 [salt.state       :1803][INFO    ][28309] Executing state pkg.installed for [python-memcache]
2018-10-10 22:45:37,580 [salt.state       :290 ][INFO    ][28309] All specified packages are already installed
2018-10-10 22:45:37,581 [salt.state       :1941][INFO    ][28309] Completed state [python-memcache] at time 22:45:37.581215 duration_in_ms=958.178
2018-10-10 22:45:37,583 [salt.state       :1770][INFO    ][28309] Running state [gnocchi-upgrade] at time 22:45:37.583702
2018-10-10 22:45:37,584 [salt.state       :1803][INFO    ][28309] Executing state cmd.run for [gnocchi-upgrade]
2018-10-10 22:45:37,584 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-10-10 22:45:40,035 [salt.state       :290 ][INFO    ][28309] {'pid': 2125, 'retcode': 0, 'stderr': '2018-10-10 22:45:39,289 [2132] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-10-10 22:45:39,737 [2132] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2018-10-10 22:45:39,953 [2132] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.34,port=6379,db=0>>>\n2018-10-10 22:45:39,955 [2132] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-10-10 22:45:40,040 [salt.state       :1941][INFO    ][28309] Completed state [gnocchi-upgrade] at time 22:45:40.040209 duration_in_ms=2456.506
2018-10-10 22:45:40,046 [salt.state       :1770][INFO    ][28309] Running state [wsgi_gnocchi] at time 22:45:40.046383
2018-10-10 22:45:40,047 [salt.state       :1803][INFO    ][28309] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-10-10 22:45:40,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-10-10 22:45:40,126 [salt.state       :290 ][INFO    ][28309] {'new': 'wsgi_gnocchi', 'old': None}
2018-10-10 22:45:40,126 [salt.state       :1941][INFO    ][28309] Completed state [wsgi_gnocchi] at time 22:45:40.126800 duration_in_ms=80.418
2018-10-10 22:45:40,131 [salt.state       :1770][INFO    ][28309] Running state [apache2] at time 22:45:40.131291
2018-10-10 22:45:40,131 [salt.state       :1803][INFO    ][28309] Executing state service.running for [apache2]
2018-10-10 22:45:40,133 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-10 22:45:40,163 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-10 22:45:40,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-10-10 22:45:41,407 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-10 22:45:41,430 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-10 22:45:41,460 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-10 22:45:41,482 [salt.state       :290 ][INFO    ][28309] {'apache2': True}
2018-10-10 22:45:41,482 [salt.state       :1941][INFO    ][28309] Completed state [apache2] at time 22:45:41.482545 duration_in_ms=1351.255
2018-10-10 22:45:41,484 [salt.state       :1770][INFO    ][28309] Running state [gnocchi-metricd] at time 22:45:41.484230
2018-10-10 22:45:41,484 [salt.state       :1803][INFO    ][28309] Executing state service.running for [gnocchi-metricd]
2018-10-10 22:45:41,485 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-10-10 22:45:41,504 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-10 22:45:41,523 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-10 22:45:41,549 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-10-10 22:45:41,603 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-10 22:45:41,638 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-10 22:45:41,684 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-10 22:45:41,728 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-10-10 22:45:42,483 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224542472255
2018-10-10 22:45:42,521 [salt.minion      :1431][INFO    ][2378] Starting a new job with PID 2378
2018-10-10 22:45:42,600 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28309] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-10 22:45:42,619 [salt.minion      :1708][INFO    ][2378] Returning information for job: 20181010224542472255
2018-10-10 22:45:42,678 [salt.state       :290 ][INFO    ][28309] {'gnocchi-metricd': True}
2018-10-10 22:45:42,679 [salt.state       :1941][INFO    ][28309] Completed state [gnocchi-metricd] at time 22:45:42.679632 duration_in_ms=1195.402
2018-10-10 22:45:42,683 [salt.minion      :1708][INFO    ][28309] Returning information for job: 20181010224406162342
2018-10-10 22:45:43,474 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command test.ping with jid 20181010224543464428
2018-10-10 22:45:43,500 [salt.minion      :1431][INFO    ][2397] Starting a new job with PID 2397
2018-10-10 22:45:43,564 [salt.minion      :1708][INFO    ][2397] Returning information for job: 20181010224543464428
2018-10-10 22:46:30,491 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.sls with jid 20181010224630477604
2018-10-10 22:46:30,512 [salt.minion      :1431][INFO    ][2437] Starting a new job with PID 2437
2018-10-10 22:46:35,611 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224635599747
2018-10-10 22:46:35,639 [salt.minion      :1431][INFO    ][2442] Starting a new job with PID 2442
2018-10-10 22:46:35,667 [salt.minion      :1708][INFO    ][2442] Returning information for job: 20181010224635599747
2018-10-10 22:46:36,653 [salt.state       :905 ][INFO    ][2437] Loading fresh modules for state activity
2018-10-10 22:46:36,725 [salt.fileclient  :1215][INFO    ][2437] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-10-10 22:46:36,775 [salt.fileclient  :1215][INFO    ][2437] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-10-10 22:46:37,567 [salt.fileclient  :1215][INFO    ][2437] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-10-10 22:46:39,797 [salt.state       :1770][INFO    ][2437] Running state [apache2] at time 22:46:39.797845
2018-10-10 22:46:39,798 [salt.state       :1803][INFO    ][2437] Executing state pkg.installed for [apache2]
2018-10-10 22:46:39,799 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:46:40,337 [salt.state       :290 ][INFO    ][2437] All specified packages are already installed
2018-10-10 22:46:40,338 [salt.state       :1941][INFO    ][2437] Completed state [apache2] at time 22:46:40.338363 duration_in_ms=540.517
2018-10-10 22:46:40,338 [salt.state       :1770][INFO    ][2437] Running state [openssl] at time 22:46:40.338769
2018-10-10 22:46:40,339 [salt.state       :1803][INFO    ][2437] Executing state pkg.installed for [openssl]
2018-10-10 22:46:40,349 [salt.state       :290 ][INFO    ][2437] All specified packages are already installed
2018-10-10 22:46:40,349 [salt.state       :1941][INFO    ][2437] Completed state [openssl] at time 22:46:40.349662 duration_in_ms=10.893
2018-10-10 22:46:40,350 [salt.state       :1770][INFO    ][2437] Running state [a2enmod rewrite] at time 22:46:40.350258
2018-10-10 22:46:40,350 [salt.state       :1803][INFO    ][2437] Executing state cmd.run for [a2enmod rewrite]
2018-10-10 22:46:40,350 [salt.state       :290 ][INFO    ][2437] /etc/apache2/mods-enabled/rewrite.load exists
2018-10-10 22:46:40,351 [salt.state       :1941][INFO    ][2437] Completed state [a2enmod rewrite] at time 22:46:40.351132 duration_in_ms=0.874
2018-10-10 22:46:40,352 [salt.state       :1770][INFO    ][2437] Running state [libapache2-mod-wsgi] at time 22:46:40.351968
2018-10-10 22:46:40,352 [salt.state       :1803][INFO    ][2437] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-10 22:46:40,364 [salt.state       :290 ][INFO    ][2437] All specified packages are already installed
2018-10-10 22:46:40,364 [salt.state       :1941][INFO    ][2437] Completed state [libapache2-mod-wsgi] at time 22:46:40.364543 duration_in_ms=12.575
2018-10-10 22:46:40,365 [salt.state       :1770][INFO    ][2437] Running state [a2enmod wsgi] at time 22:46:40.365022
2018-10-10 22:46:40,365 [salt.state       :1803][INFO    ][2437] Executing state cmd.run for [a2enmod wsgi]
2018-10-10 22:46:40,367 [salt.state       :290 ][INFO    ][2437] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-10 22:46:40,367 [salt.state       :1941][INFO    ][2437] Completed state [a2enmod wsgi] at time 22:46:40.367390 duration_in_ms=2.368
2018-10-10 22:46:40,373 [salt.state       :1770][INFO    ][2437] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:46:40.373797
2018-10-10 22:46:40,374 [salt.state       :1803][INFO    ][2437] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-10 22:46:40,695 [salt.state       :290 ][INFO    ][2437] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-10-10 22:46:40,695 [salt.state       :1941][INFO    ][2437] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:46:40.695524 duration_in_ms=321.727
2018-10-10 22:46:40,695 [salt.state       :1770][INFO    ][2437] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:46:40.695799
2018-10-10 22:46:40,696 [salt.state       :1803][INFO    ][2437] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-10 22:46:40,696 [salt.state       :290 ][INFO    ][2437] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-10 22:46:40,696 [salt.state       :1941][INFO    ][2437] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:46:40.696673 duration_in_ms=0.874
2018-10-10 22:46:40,696 [salt.state       :1770][INFO    ][2437] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:46:40.696912
2018-10-10 22:46:40,697 [salt.state       :1803][INFO    ][2437] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-10 22:46:40,697 [salt.state       :290 ][INFO    ][2437] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-10-10 22:46:40,697 [salt.state       :1941][INFO    ][2437] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:46:40.697656 duration_in_ms=0.744
2018-10-10 22:46:40,698 [salt.state       :1770][INFO    ][2437] Running state [a2enmod mpm_prefork] at time 22:46:40.698372
2018-10-10 22:46:40,698 [salt.state       :1803][INFO    ][2437] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-10 22:46:40,699 [salt.state       :290 ][INFO    ][2437] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-10-10 22:46:40,699 [salt.state       :1941][INFO    ][2437] Completed state [a2enmod mpm_prefork] at time 22:46:40.699514 duration_in_ms=1.143
2018-10-10 22:46:40,699 [salt.state       :1770][INFO    ][2437] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:46:40.699755
2018-10-10 22:46:40,700 [salt.state       :1803][INFO    ][2437] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-10 22:46:40,700 [salt.state       :290 ][INFO    ][2437] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-10 22:46:40,701 [salt.state       :1941][INFO    ][2437] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:46:40.701206 duration_in_ms=1.451
2018-10-10 22:46:40,701 [salt.state       :1770][INFO    ][2437] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:46:40.701435
2018-10-10 22:46:40,701 [salt.state       :1803][INFO    ][2437] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-10 22:46:40,701 [salt.state       :290 ][INFO    ][2437] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-10-10 22:46:40,702 [salt.state       :1941][INFO    ][2437] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:46:40.702157 duration_in_ms=0.722
2018-10-10 22:46:40,703 [salt.state       :1770][INFO    ][2437] Running state [apache_server_service_task] at time 22:46:40.702995
2018-10-10 22:46:40,703 [salt.state       :1803][INFO    ][2437] Executing state test.show_notification for [apache_server_service_task]
2018-10-10 22:46:40,703 [salt.state       :290 ][INFO    ][2437] Running apache.server.service
2018-10-10 22:46:40,703 [salt.state       :1941][INFO    ][2437] Completed state [apache_server_service_task] at time 22:46:40.703688 duration_in_ms=0.692
2018-10-10 22:46:40,704 [salt.state       :1770][INFO    ][2437] Running state [/etc/apache2/ports.conf] at time 22:46:40.704149
2018-10-10 22:46:40,704 [salt.state       :1803][INFO    ][2437] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-10 22:46:40,793 [salt.state       :290 ][INFO    ][2437] File /etc/apache2/ports.conf is in the correct state
2018-10-10 22:46:40,795 [salt.state       :1941][INFO    ][2437] Completed state [/etc/apache2/ports.conf] at time 22:46:40.794423 duration_in_ms=90.272
2018-10-10 22:46:40,795 [salt.state       :1770][INFO    ][2437] Running state [/etc/apache2/conf-available/security.conf] at time 22:46:40.795447
2018-10-10 22:46:40,795 [salt.state       :1803][INFO    ][2437] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-10 22:46:40,876 [salt.state       :290 ][INFO    ][2437] File /etc/apache2/conf-available/security.conf is in the correct state
2018-10-10 22:46:40,877 [salt.state       :1941][INFO    ][2437] Completed state [/etc/apache2/conf-available/security.conf] at time 22:46:40.877274 duration_in_ms=81.827
2018-10-10 22:46:40,885 [salt.state       :1770][INFO    ][2437] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 22:46:40.885644
2018-10-10 22:46:40,885 [salt.state       :1803][INFO    ][2437] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-10 22:46:40,886 [salt.state       :290 ][INFO    ][2437] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-10-10 22:46:40,886 [salt.state       :1941][INFO    ][2437] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 22:46:40.886805 duration_in_ms=1.161
2018-10-10 22:46:40,887 [salt.state       :1770][INFO    ][2437] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:46:40.887240
2018-10-10 22:46:40,887 [salt.state       :1803][INFO    ][2437] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-10 22:46:41,159 [salt.state       :290 ][INFO    ][2437] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-10-10 22:46:41,159 [salt.state       :1941][INFO    ][2437] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:46:41.159606 duration_in_ms=272.365
2018-10-10 22:46:41,160 [salt.state       :1770][INFO    ][2437] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:46:41.160439
2018-10-10 22:46:41,160 [salt.state       :1803][INFO    ][2437] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-10 22:46:41,441 [salt.state       :290 ][INFO    ][2437] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-10-10 22:46:41,442 [salt.state       :1941][INFO    ][2437] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:46:41.442642 duration_in_ms=282.202
2018-10-10 22:46:41,444 [salt.state       :1770][INFO    ][2437] Running state [apache2] at time 22:46:41.444528
2018-10-10 22:46:41,444 [salt.state       :1803][INFO    ][2437] Executing state service.running for [apache2]
2018-10-10 22:46:41,445 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-10 22:46:41,498 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-10 22:46:41,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-10 22:46:41,550 [salt.state       :290 ][INFO    ][2437] The service apache2 is already running
2018-10-10 22:46:41,551 [salt.state       :1941][INFO    ][2437] Completed state [apache2] at time 22:46:41.550993 duration_in_ms=106.464
2018-10-10 22:46:41,552 [salt.state       :1770][INFO    ][2437] Running state [/etc/apache2/conf-enabled/security.conf] at time 22:46:41.552924
2018-10-10 22:46:41,553 [salt.state       :1803][INFO    ][2437] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-10 22:46:41,556 [salt.state       :290 ][INFO    ][2437] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-10-10 22:46:41,557 [salt.state       :1941][INFO    ][2437] Completed state [/etc/apache2/conf-enabled/security.conf] at time 22:46:41.557225 duration_in_ms=4.302
2018-10-10 22:46:41,558 [salt.state       :1770][INFO    ][2437] Running state [panko-api] at time 22:46:41.558319
2018-10-10 22:46:41,558 [salt.state       :1803][INFO    ][2437] Executing state pkg.installed for [panko-api]
2018-10-10 22:46:41,589 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-10-10 22:46:41,752 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-10 22:46:44,278 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:46:44,322 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-10-10 22:46:45,755 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224645745715
2018-10-10 22:46:45,786 [salt.minion      :1431][INFO    ][2912] Starting a new job with PID 2912
2018-10-10 22:46:45,818 [salt.minion      :1708][INFO    ][2912] Returning information for job: 20181010224645745715
2018-10-10 22:46:48,471 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:46:48,537 [salt.state       :290 ][INFO    ][2437] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-10-10 22:46:48,583 [salt.state       :905 ][INFO    ][2437] Loading fresh modules for state activity
2018-10-10 22:46:48,640 [salt.state       :1941][INFO    ][2437] Completed state [panko-api] at time 22:46:48.640760 duration_in_ms=7082.441
2018-10-10 22:46:48,644 [salt.state       :1770][INFO    ][2437] Running state [panko_ssl_mysql] at time 22:46:48.644023
2018-10-10 22:46:48,645 [salt.state       :1803][INFO    ][2437] Executing state test.show_notification for [panko_ssl_mysql]
2018-10-10 22:46:48,645 [salt.state       :290 ][INFO    ][2437] Running panko._ssl.mysql
2018-10-10 22:46:48,646 [salt.state       :1941][INFO    ][2437] Completed state [panko_ssl_mysql] at time 22:46:48.646751 duration_in_ms=2.728
2018-10-10 22:46:48,649 [salt.state       :1770][INFO    ][2437] Running state [/etc/panko/panko.conf] at time 22:46:48.649455
2018-10-10 22:46:48,650 [salt.state       :1803][INFO    ][2437] Executing state file.managed for [/etc/panko/panko.conf]
2018-10-10 22:46:48,683 [salt.fileclient  :1215][INFO    ][2437] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-10-10 22:46:48,749 [salt.fileclient  :1215][INFO    ][2437] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-10-10 22:46:48,780 [salt.fileclient  :1215][INFO    ][2437] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-10-10 22:46:48,888 [salt.state       :290 ][INFO    ][2437] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -466,110 +481,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-10-10 22:46:48,896 [salt.state       :1941][INFO    ][2437] Completed state [/etc/panko/panko.conf] at time 22:46:48.896547 duration_in_ms=247.091
2018-10-10 22:46:48,897 [salt.state       :1770][INFO    ][2437] Running state [panko-dbsync] at time 22:46:48.897893
2018-10-10 22:46:48,898 [salt.state       :1803][INFO    ][2437] Executing state cmd.run for [panko-dbsync]
2018-10-10 22:46:48,910 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command 'panko-dbsync' in directory '/root'
2018-10-10 22:46:50,917 [salt.state       :290 ][INFO    ][2437] {'pid': 3071, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-10 22:46:50,918 [salt.state       :1941][INFO    ][2437] Completed state [panko-dbsync] at time 22:46:50.918775 duration_in_ms=2020.881
2018-10-10 22:46:50,927 [salt.state       :1770][INFO    ][2437] Running state [wsgi_panko] at time 22:46:50.927655
2018-10-10 22:46:50,927 [salt.state       :1803][INFO    ][2437] Executing state apache_site.enabled for [wsgi_panko]
2018-10-10 22:46:50,929 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-10-10 22:46:51,010 [salt.state       :290 ][INFO    ][2437] {'new': 'wsgi_panko', 'old': None}
2018-10-10 22:46:51,011 [salt.state       :1941][INFO    ][2437] Completed state [wsgi_panko] at time 22:46:51.010983 duration_in_ms=83.328
2018-10-10 22:46:51,700 [salt.state       :1770][INFO    ][2437] Running state [apache2] at time 22:46:51.699760
2018-10-10 22:46:51,701 [salt.state       :1803][INFO    ][2437] Executing state service.running for [apache2]
2018-10-10 22:46:51,702 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-10 22:46:51,730 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-10 22:46:51,760 [salt.state       :290 ][INFO    ][2437] The service apache2 is already running
2018-10-10 22:46:51,762 [salt.state       :1941][INFO    ][2437] Completed state [apache2] at time 22:46:51.762531 duration_in_ms=62.771
2018-10-10 22:46:51,762 [salt.state       :1770][INFO    ][2437] Running state [apache2] at time 22:46:51.762860
2018-10-10 22:46:51,763 [salt.state       :1803][INFO    ][2437] Executing state service.mod_watch for [apache2]
2018-10-10 22:46:51,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-10 22:46:51,796 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2437] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-10 22:46:54,168 [salt.state       :290 ][INFO    ][2437] {'apache2': True}
2018-10-10 22:46:54,169 [salt.state       :1941][INFO    ][2437] Completed state [apache2] at time 22:46:54.169162 duration_in_ms=2406.298
2018-10-10 22:46:54,177 [salt.minion      :1708][INFO    ][2437] Returning information for job: 20181010224630477604
2018-10-10 22:46:54,857 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command test.ping with jid 20181010224654848603
2018-10-10 22:46:54,880 [salt.minion      :1431][INFO    ][3219] Starting a new job with PID 3219
2018-10-10 22:46:54,929 [salt.minion      :1708][INFO    ][3219] Returning information for job: 20181010224654848603
2018-10-10 22:49:49,260 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.sls with jid 20181010224949251693
2018-10-10 22:49:49,289 [salt.minion      :1431][INFO    ][3251] Starting a new job with PID 3251
2018-10-10 22:49:54,381 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010224954370640
2018-10-10 22:49:54,407 [salt.minion      :1431][INFO    ][3256] Starting a new job with PID 3256
2018-10-10 22:49:54,436 [salt.minion      :1708][INFO    ][3256] Returning information for job: 20181010224954370640
2018-10-10 22:49:55,417 [salt.state       :905 ][INFO    ][3251] Loading fresh modules for state activity
2018-10-10 22:49:55,487 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-10-10 22:49:55,531 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-10-10 22:49:55,752 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-10-10 22:49:55,825 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-10-10 22:49:58,194 [salt.state       :1770][INFO    ][3251] Running state [aodh-api] at time 22:49:58.193612
2018-10-10 22:49:58,194 [salt.state       :1803][INFO    ][3251] Executing state pkg.installed for [aodh-api]
2018-10-10 22:49:58,195 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:49:58,792 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-10-10 22:49:58,981 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-10 22:50:01,508 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:50:01,552 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-10-10 22:50:04,518 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225004501643
2018-10-10 22:50:04,539 [salt.minion      :1431][INFO    ][3715] Starting a new job with PID 3715
2018-10-10 22:50:04,572 [salt.minion      :1708][INFO    ][3715] Returning information for job: 20181010225004501643
2018-10-10 22:50:14,691 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225014676194
2018-10-10 22:50:14,710 [salt.minion      :1431][INFO    ][6784] Starting a new job with PID 6784
2018-10-10 22:50:14,743 [salt.minion      :1708][INFO    ][6784] Returning information for job: 20181010225014676194
2018-10-10 22:50:19,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:50:19,423 [salt.state       :290 ][INFO    ][3251] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'c++-compiler' changed from 'absent' to '1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-137.163'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev' changed from 'absent' to '1'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'binutils-gold' changed from 'absent' to '1'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-10-10 22:50:19,465 [salt.state       :905 ][INFO    ][3251] Loading fresh modules for state activity
2018-10-10 22:50:19,717 [salt.state       :1941][INFO    ][3251] Completed state [aodh-api] at time 22:50:19.717193 duration_in_ms=21523.583
2018-10-10 22:50:19,724 [salt.state       :1770][INFO    ][3251] Running state [aodh-evaluator] at time 22:50:19.724215
2018-10-10 22:50:19,724 [salt.state       :1803][INFO    ][3251] Executing state pkg.installed for [aodh-evaluator]
2018-10-10 22:50:20,703 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:50:20,745 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-10-10 22:50:24,732 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:50:24,798 [salt.state       :290 ][INFO    ][3251] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-10 22:50:24,825 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225024816786
2018-10-10 22:50:24,866 [salt.state       :905 ][INFO    ][3251] Loading fresh modules for state activity
2018-10-10 22:50:24,870 [salt.minion      :1431][INFO    ][9115] Starting a new job with PID 9115
2018-10-10 22:50:24,918 [salt.minion      :1708][INFO    ][9115] Returning information for job: 20181010225024816786
2018-10-10 22:50:24,947 [salt.state       :1941][INFO    ][3251] Completed state [aodh-evaluator] at time 22:50:24.947636 duration_in_ms=5223.421
2018-10-10 22:50:24,969 [salt.state       :1770][INFO    ][3251] Running state [aodh-notifier] at time 22:50:24.969412
2018-10-10 22:50:24,970 [salt.state       :1803][INFO    ][3251] Executing state pkg.installed for [aodh-notifier]
2018-10-10 22:50:26,431 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:50:26,481 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-10-10 22:50:30,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:50:30,554 [salt.state       :290 ][INFO    ][3251] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-10 22:50:30,595 [salt.state       :905 ][INFO    ][3251] Loading fresh modules for state activity
2018-10-10 22:50:30,660 [salt.state       :1941][INFO    ][3251] Completed state [aodh-notifier] at time 22:50:30.660802 duration_in_ms=5691.389
2018-10-10 22:50:30,673 [salt.state       :1770][INFO    ][3251] Running state [aodh-listener] at time 22:50:30.673002
2018-10-10 22:50:30,673 [salt.state       :1803][INFO    ][3251] Executing state pkg.installed for [aodh-listener]
2018-10-10 22:50:31,994 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:50:32,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-10-10 22:50:34,845 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225034832495
2018-10-10 22:50:34,879 [salt.minion      :1431][INFO    ][9663] Starting a new job with PID 9663
2018-10-10 22:50:34,905 [salt.minion      :1708][INFO    ][9663] Returning information for job: 20181010225034832495
2018-10-10 22:50:35,993 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:50:36,063 [salt.state       :290 ][INFO    ][3251] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-10 22:50:36,101 [salt.state       :905 ][INFO    ][3251] Loading fresh modules for state activity
2018-10-10 22:50:36,164 [salt.state       :1941][INFO    ][3251] Completed state [aodh-listener] at time 22:50:36.164469 duration_in_ms=5491.466
2018-10-10 22:50:36,179 [salt.state       :1770][INFO    ][3251] Running state [python-aodhclient] at time 22:50:36.179948
2018-10-10 22:50:36,180 [salt.state       :1803][INFO    ][3251] Executing state pkg.installed for [python-aodhclient]
2018-10-10 22:50:37,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:50:37,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-10-10 22:50:40,041 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:50:40,110 [salt.state       :290 ][INFO    ][3251] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-10-10 22:50:40,149 [salt.state       :905 ][INFO    ][3251] Loading fresh modules for state activity
2018-10-10 22:50:40,209 [salt.state       :1941][INFO    ][3251] Completed state [python-aodhclient] at time 22:50:40.208905 duration_in_ms=4028.955
2018-10-10 22:50:40,212 [salt.state       :1770][INFO    ][3251] Running state [aodh_ssl_mysql] at time 22:50:40.212736
2018-10-10 22:50:40,213 [salt.state       :1803][INFO    ][3251] Executing state test.show_notification for [aodh_ssl_mysql]
2018-10-10 22:50:40,213 [salt.state       :290 ][INFO    ][3251] Running aodh._ssl.mysql
2018-10-10 22:50:40,214 [salt.state       :1941][INFO    ][3251] Completed state [aodh_ssl_mysql] at time 22:50:40.213964 duration_in_ms=1.229
2018-10-10 22:50:40,214 [salt.state       :1770][INFO    ][3251] Running state [aodh_ssl_rabbitmq] at time 22:50:40.214355
2018-10-10 22:50:40,214 [salt.state       :1803][INFO    ][3251] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-10-10 22:50:40,215 [salt.state       :290 ][INFO    ][3251] Running aodh._ssl.rabbitmq
2018-10-10 22:50:40,215 [salt.state       :1941][INFO    ][3251] Completed state [aodh_ssl_rabbitmq] at time 22:50:40.215425 duration_in_ms=1.07
2018-10-10 22:50:40,219 [salt.state       :1770][INFO    ][3251] Running state [/etc/aodh/aodh.conf] at time 22:50:40.219308
2018-10-10 22:50:40,219 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-10-10 22:50:40,261 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-10-10 22:50:40,343 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-10-10 22:50:40,474 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-10-10 22:50:40,493 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-10-10 22:50:40,536 [salt.state       :290 ][INFO    ][3251] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.34
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,291 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +862,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +878,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +916,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -775,995 +1034,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-10-10 22:50:40,538 [salt.state       :1941][INFO    ][3251] Completed state [/etc/aodh/aodh.conf] at time 22:50:40.538639 duration_in_ms=319.331
2018-10-10 22:50:40,539 [salt.state       :1770][INFO    ][3251] Running state [/etc/default/aodh-evaluator] at time 22:50:40.539081
2018-10-10 22:50:40,539 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-10-10 22:50:40,560 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-10-10 22:50:40,596 [salt.state       :290 ][INFO    ][3251] File changed:
New file
2018-10-10 22:50:40,612 [salt.state       :1941][INFO    ][3251] Completed state [/etc/default/aodh-evaluator] at time 22:50:40.612275 duration_in_ms=73.194
2018-10-10 22:50:40,612 [salt.state       :1770][INFO    ][3251] Running state [/etc/default/aodh-notifier] at time 22:50:40.612725
2018-10-10 22:50:40,613 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/default/aodh-notifier]
2018-10-10 22:50:40,681 [salt.state       :290 ][INFO    ][3251] File changed:
New file
2018-10-10 22:50:40,682 [salt.state       :1941][INFO    ][3251] Completed state [/etc/default/aodh-notifier] at time 22:50:40.682312 duration_in_ms=69.587
2018-10-10 22:50:40,685 [salt.state       :1770][INFO    ][3251] Running state [/etc/default/aodh-listener] at time 22:50:40.685935
2018-10-10 22:50:40,686 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/default/aodh-listener]
2018-10-10 22:50:40,735 [salt.state       :290 ][INFO    ][3251] File changed:
New file
2018-10-10 22:50:40,735 [salt.state       :1941][INFO    ][3251] Completed state [/etc/default/aodh-listener] at time 22:50:40.735336 duration_in_ms=49.401
2018-10-10 22:50:40,740 [salt.state       :1770][INFO    ][3251] Running state [aodh-dbsync] at time 22:50:40.740002
2018-10-10 22:50:40,740 [salt.state       :1803][INFO    ][3251] Executing state cmd.run for [aodh-dbsync]
2018-10-10 22:50:40,754 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'aodh-dbsync' in directory '/root'
2018-10-10 22:50:43,388 [salt.state       :290 ][INFO    ][3251] {'pid': 9864, 'retcode': 0, 'stderr': '', 'stdout': '2018-10-10 22:50:43.219 9865 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-10-10 22:50:43.220 9865 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-10-10 22:50:43,389 [salt.state       :1941][INFO    ][3251] Completed state [aodh-dbsync] at time 22:50:43.389319 duration_in_ms=2649.316
2018-10-10 22:50:43,391 [salt.state       :1770][INFO    ][3251] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 22:50:43.391132
2018-10-10 22:50:43,391 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-10-10 22:50:43,418 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-10-10 22:50:43,466 [salt.state       :290 ][INFO    ][3251] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.34:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-10-10 22:50:43,469 [salt.state       :1941][INFO    ][3251] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 22:50:43.469402 duration_in_ms=78.27
2018-10-10 22:50:43,469 [salt.state       :1770][INFO    ][3251] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 22:50:43.469848
2018-10-10 22:50:43,470 [salt.state       :1803][INFO    ][3251] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-10-10 22:50:43,485 [salt.state       :290 ][INFO    ][3251] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-10-10 22:50:43,486 [salt.state       :1941][INFO    ][3251] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 22:50:43.485971 duration_in_ms=16.123
2018-10-10 22:50:44,211 [salt.state       :1770][INFO    ][3251] Running state [apache2] at time 22:50:44.211553
2018-10-10 22:50:44,213 [salt.state       :1803][INFO    ][3251] Executing state service.running for [apache2]
2018-10-10 22:50:44,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-10 22:50:44,244 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-10 22:50:44,268 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-10 22:50:44,297 [salt.state       :290 ][INFO    ][3251] The service apache2 is already running
2018-10-10 22:50:44,298 [salt.state       :1941][INFO    ][3251] Completed state [apache2] at time 22:50:44.298518 duration_in_ms=86.964
2018-10-10 22:50:44,299 [salt.state       :1770][INFO    ][3251] Running state [apache2] at time 22:50:44.299170
2018-10-10 22:50:44,299 [salt.state       :1803][INFO    ][3251] Executing state service.mod_watch for [apache2]
2018-10-10 22:50:44,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-10 22:50:44,327 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-10 22:50:45,047 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225045034575
2018-10-10 22:50:45,069 [salt.minion      :1431][INFO    ][9921] Starting a new job with PID 9921
2018-10-10 22:50:45,093 [salt.minion      :1708][INFO    ][9921] Returning information for job: 20181010225045034575
2018-10-10 22:50:45,756 [salt.state       :290 ][INFO    ][3251] {'apache2': True}
2018-10-10 22:50:45,757 [salt.state       :1941][INFO    ][3251] Completed state [apache2] at time 22:50:45.757179 duration_in_ms=1458.009
2018-10-10 22:50:45,759 [salt.state       :1770][INFO    ][3251] Running state [aodh-evaluator] at time 22:50:45.758963
2018-10-10 22:50:45,759 [salt.state       :1803][INFO    ][3251] Executing state service.running for [aodh-evaluator]
2018-10-10 22:50:45,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-10-10 22:50:45,800 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-10 22:50:45,832 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-10-10 22:50:45,860 [salt.state       :290 ][INFO    ][3251] The service aodh-evaluator is already running
2018-10-10 22:50:45,861 [salt.state       :1941][INFO    ][3251] Completed state [aodh-evaluator] at time 22:50:45.861421 duration_in_ms=102.458
2018-10-10 22:50:45,865 [salt.state       :1770][INFO    ][3251] Running state [aodh-evaluator] at time 22:50:45.865648
2018-10-10 22:50:45,866 [salt.state       :1803][INFO    ][3251] Executing state service.mod_watch for [aodh-evaluator]
2018-10-10 22:50:45,869 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-10 22:50:45,902 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-10-10 22:50:46,214 [salt.state       :290 ][INFO    ][3251] {'aodh-evaluator': True}
2018-10-10 22:50:46,215 [salt.state       :1941][INFO    ][3251] Completed state [aodh-evaluator] at time 22:50:46.214910 duration_in_ms=349.262
2018-10-10 22:50:46,216 [salt.state       :1770][INFO    ][3251] Running state [aodh-notifier] at time 22:50:46.216006
2018-10-10 22:50:46,225 [salt.state       :1803][INFO    ][3251] Executing state service.running for [aodh-notifier]
2018-10-10 22:50:46,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-10-10 22:50:46,285 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-10 22:50:46,337 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-10-10 22:50:46,375 [salt.state       :290 ][INFO    ][3251] The service aodh-notifier is already running
2018-10-10 22:50:46,376 [salt.state       :1941][INFO    ][3251] Completed state [aodh-notifier] at time 22:50:46.376170 duration_in_ms=160.163
2018-10-10 22:50:46,376 [salt.state       :1770][INFO    ][3251] Running state [aodh-notifier] at time 22:50:46.376615
2018-10-10 22:50:46,377 [salt.state       :1803][INFO    ][3251] Executing state service.mod_watch for [aodh-notifier]
2018-10-10 22:50:46,378 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-10 22:50:46,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-10-10 22:50:55,184 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225055170181
2018-10-10 22:50:55,211 [salt.minion      :1431][INFO    ][10133] Starting a new job with PID 10133
2018-10-10 22:50:55,235 [salt.minion      :1708][INFO    ][10133] Returning information for job: 20181010225055170181
2018-10-10 22:51:01,722 [salt.state       :290 ][INFO    ][3251] {'aodh-notifier': True}
2018-10-10 22:51:01,723 [salt.state       :1941][INFO    ][3251] Completed state [aodh-notifier] at time 22:51:01.723016 duration_in_ms=15346.4
2018-10-10 22:51:01,725 [salt.state       :1770][INFO    ][3251] Running state [aodh-listener] at time 22:51:01.725411
2018-10-10 22:51:01,725 [salt.state       :1803][INFO    ][3251] Executing state service.running for [aodh-listener]
2018-10-10 22:51:01,726 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-10-10 22:51:01,763 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-10 22:51:01,785 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-10-10 22:51:01,806 [salt.state       :290 ][INFO    ][3251] The service aodh-listener is already running
2018-10-10 22:51:01,806 [salt.state       :1941][INFO    ][3251] Completed state [aodh-listener] at time 22:51:01.806533 duration_in_ms=81.121
2018-10-10 22:51:01,807 [salt.state       :1770][INFO    ][3251] Running state [aodh-listener] at time 22:51:01.806857
2018-10-10 22:51:01,807 [salt.state       :1803][INFO    ][3251] Executing state service.mod_watch for [aodh-listener]
2018-10-10 22:51:01,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-10 22:51:01,831 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-10-10 22:51:05,367 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225105355652
2018-10-10 22:51:05,395 [salt.minion      :1431][INFO    ][10203] Starting a new job with PID 10203
2018-10-10 22:51:05,420 [salt.minion      :1708][INFO    ][10203] Returning information for job: 20181010225105355652
2018-10-10 22:51:15,515 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225115501442
2018-10-10 22:51:15,538 [salt.minion      :1431][INFO    ][10208] Starting a new job with PID 10208
2018-10-10 22:51:15,565 [salt.minion      :1708][INFO    ][10208] Returning information for job: 20181010225115501442
2018-10-10 22:51:16,970 [salt.state       :290 ][INFO    ][3251] {'aodh-listener': True}
2018-10-10 22:51:16,971 [salt.state       :1941][INFO    ][3251] Completed state [aodh-listener] at time 22:51:16.971186 duration_in_ms=15164.328
2018-10-10 22:51:16,979 [salt.minion      :1708][INFO    ][3251] Returning information for job: 20181010224949251693
2018-10-10 22:51:17,706 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command state.sls with jid 20181010225117698195
2018-10-10 22:51:17,725 [salt.minion      :1431][INFO    ][10252] Starting a new job with PID 10252
2018-10-10 22:51:22,804 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225122793133
2018-10-10 22:51:22,826 [salt.minion      :1431][INFO    ][10267] Starting a new job with PID 10267
2018-10-10 22:51:22,851 [salt.minion      :1708][INFO    ][10267] Returning information for job: 20181010225122793133
2018-10-10 22:51:24,710 [salt.state       :905 ][INFO    ][10252] Loading fresh modules for state activity
2018-10-10 22:51:24,777 [salt.fileclient  :1215][INFO    ][10252] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-10-10 22:51:24,816 [salt.fileclient  :1215][INFO    ][10252] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-10-10 22:51:27,109 [salt.state       :1770][INFO    ][10252] Running state [ceilometer-agent-central] at time 22:51:27.108990
2018-10-10 22:51:27,110 [salt.state       :1803][INFO    ][10252] Executing state pkg.installed for [ceilometer-agent-central]
2018-10-10 22:51:27,111 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:51:27,760 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-10-10 22:51:27,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-10 22:51:30,493 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:51:30,541 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-10-10 22:51:32,906 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225132893095
2018-10-10 22:51:32,935 [salt.minion      :1431][INFO    ][10647] Starting a new job with PID 10647
2018-10-10 22:51:32,961 [salt.minion      :1708][INFO    ][10647] Returning information for job: 20181010225132893095
2018-10-10 22:51:43,102 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225143087863
2018-10-10 22:51:43,123 [salt.minion      :1431][INFO    ][11238] Starting a new job with PID 11238
2018-10-10 22:51:43,149 [salt.minion      :1708][INFO    ][11238] Returning information for job: 20181010225143087863
2018-10-10 22:51:53,302 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225153289463
2018-10-10 22:51:53,322 [salt.minion      :1431][INFO    ][12571] Starting a new job with PID 12571
2018-10-10 22:51:53,347 [salt.minion      :1708][INFO    ][12571] Returning information for job: 20181010225153289463
2018-10-10 22:51:58,086 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:51:58,171 [salt.state       :290 ][INFO    ][10252] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'ibverbs-providers' changed from 'absent' to '17.1-1~cloud0'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmthca1' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libipathverbs1' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libmlx4-1' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libmlx5-1' changed from 'absent' to '1'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '17.1-1~cloud0'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libnes1' changed from 'absent' to '1'
'librados2' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'libcxgb3-1' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'librdmacm1' changed from 'absent' to '17.1-1~cloud0'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-10-10 22:51:58,216 [salt.state       :905 ][INFO    ][10252] Loading fresh modules for state activity
2018-10-10 22:51:58,504 [salt.state       :1941][INFO    ][10252] Completed state [ceilometer-agent-central] at time 22:51:58.504552 duration_in_ms=31395.562
2018-10-10 22:51:58,513 [salt.state       :1770][INFO    ][10252] Running state [python-ceilometerclient] at time 22:51:58.513438
2018-10-10 22:51:58,514 [salt.state       :1803][INFO    ][10252] Executing state pkg.installed for [python-ceilometerclient]
2018-10-10 22:51:59,485 [salt.state       :290 ][INFO    ][10252] All specified packages are already installed
2018-10-10 22:51:59,486 [salt.state       :1941][INFO    ][10252] Completed state [python-ceilometerclient] at time 22:51:59.485997 duration_in_ms=972.558
2018-10-10 22:51:59,486 [salt.state       :1770][INFO    ][10252] Running state [ceilometer-agent-notification] at time 22:51:59.486629
2018-10-10 22:51:59,487 [salt.state       :1803][INFO    ][10252] Executing state pkg.installed for [ceilometer-agent-notification]
2018-10-10 22:51:59,520 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-10 22:51:59,561 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-10-10 22:52:03,515 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-10 22:52:03,521 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command saltutil.find_job with jid 20181010225203509572
2018-10-10 22:52:03,553 [salt.minion      :1431][INFO    ][13048] Starting a new job with PID 13048
2018-10-10 22:52:03,578 [salt.minion      :1708][INFO    ][13048] Returning information for job: 20181010225203509572
2018-10-10 22:52:03,618 [salt.state       :290 ][INFO    ][10252] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-10-10 22:52:03,655 [salt.state       :905 ][INFO    ][10252] Loading fresh modules for state activity
2018-10-10 22:52:03,716 [salt.state       :1941][INFO    ][10252] Completed state [ceilometer-agent-notification] at time 22:52:03.716713 duration_in_ms=4230.083
2018-10-10 22:52:03,723 [salt.state       :1770][INFO    ][10252] Running state [/etc/ceilometer/ceilometer.conf] at time 22:52:03.723586
2018-10-10 22:52:03,725 [salt.state       :1803][INFO    ][10252] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-10-10 22:52:03,805 [salt.fileclient  :1215][INFO    ][10252] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-10-10 22:52:04,220 [salt.fileclient  :1215][INFO    ][10252] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-10-10 22:52:04,253 [salt.fileclient  :1215][INFO    ][10252] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-10-10 22:52:04,322 [salt.state       :290 ][INFO    ][10252] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-10-10 22:52:04,324 [salt.state       :1941][INFO    ][10252] Completed state [/etc/ceilometer/ceilometer.conf] at time 22:52:04.324054 duration_in_ms=600.468
2018-10-10 22:52:04,324 [salt.state       :1770][INFO    ][10252] Running state [/etc/default/ceilometer-agent-central] at time 22:52:04.324499
2018-10-10 22:52:04,324 [salt.state       :1803][INFO    ][10252] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-10-10 22:52:04,353 [salt.fileclient  :1215][INFO    ][10252] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-10-10 22:52:04,367 [salt.state       :290 ][INFO    ][10252] File changed:
New file
2018-10-10 22:52:04,368 [salt.state       :1941][INFO    ][10252] Completed state [/etc/default/ceilometer-agent-central] at time 22:52:04.367996 duration_in_ms=43.497
2018-10-10 22:52:04,368 [salt.state       :1770][INFO    ][10252] Running state [/etc/default/ceilometer-agent-notification] at time 22:52:04.368785
2018-10-10 22:52:04,369 [salt.state       :1803][INFO    ][10252] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-10-10 22:52:04,401 [salt.state       :290 ][INFO    ][10252] File changed:
New file
2018-10-10 22:52:04,401 [salt.state       :1941][INFO    ][10252] Completed state [/etc/default/ceilometer-agent-notification] at time 22:52:04.401598 duration_in_ms=32.813
2018-10-10 22:52:04,414 [salt.state       :1770][INFO    ][10252] Running state [python-gnocchiclient] at time 22:52:04.414250
2018-10-10 22:52:04,414 [salt.state       :1803][INFO    ][10252] Executing state pkg.latest for [python-gnocchiclient]
2018-10-10 22:52:04,430 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-10-10 22:52:04,968 [salt.state       :290 ][INFO    ][10252] Package python-gnocchiclient is already up-to-date
2018-10-10 22:52:04,969 [salt.state       :1941][INFO    ][10252] Completed state [python-gnocchiclient] at time 22:52:04.969355 duration_in_ms=555.105
2018-10-10 22:52:04,970 [salt.state       :1770][INFO    ][10252] Running state [/etc/ceilometer/pipeline.yaml] at time 22:52:04.969972
2018-10-10 22:52:04,970 [salt.state       :1803][INFO    ][10252] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-10-10 22:52:05,004 [salt.fileclient  :1215][INFO    ][10252] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-10-10 22:52:05,092 [salt.state       :290 ][INFO    ][10252] File changed:
New file
2018-10-10 22:52:05,092 [salt.state       :1941][INFO    ][10252] Completed state [/etc/ceilometer/pipeline.yaml] at time 22:52:05.092330 duration_in_ms=122.358
2018-10-10 22:52:05,093 [salt.state       :1770][INFO    ][10252] Running state [/etc/ceilometer/event_pipeline.yaml] at time 22:52:05.093105
2018-10-10 22:52:05,093 [salt.state       :1803][INFO    ][10252] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-10-10 22:52:05,115 [salt.fileclient  :1215][INFO    ][10252] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-10-10 22:52:05,187 [salt.state       :290 ][INFO    ][10252] File changed:
New file
2018-10-10 22:52:05,187 [salt.state       :1941][INFO    ][10252] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 22:52:05.187590 duration_in_ms=94.485
2018-10-10 22:52:05,189 [salt.state       :1770][INFO    ][10252] Running state [/etc/ceilometer/event_definitions.yaml] at time 22:52:05.189807
2018-10-10 22:52:05,190 [salt.state       :1803][INFO    ][10252] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-10-10 22:52:05,205 [salt.fileclient  :1215][INFO    ][10252] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-10-10 22:52:05,221 [salt.state       :290 ][INFO    ][10252] File changed:
New file
2018-10-10 22:52:05,222 [salt.state       :1941][INFO    ][10252] Completed state [/etc/ceilometer/event_definitions.yaml] at time 22:52:05.222004 duration_in_ms=32.197
2018-10-10 22:52:05,222 [salt.state       :1770][INFO    ][10252] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 22:52:05.222391
2018-10-10 22:52:05,223 [salt.state       :1803][INFO    ][10252] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-10-10 22:52:05,237 [salt.fileclient  :1215][INFO    ][10252] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-10-10 22:52:05,249 [salt.state       :290 ][INFO    ][10252] File changed:
New file
2018-10-10 22:52:05,249 [salt.state       :1941][INFO    ][10252] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 22:52:05.249202 duration_in_ms=26.811
2018-10-10 22:52:05,908 [salt.state       :1770][INFO    ][10252] Running state [ceilometer-agent-central] at time 22:52:05.907915
2018-10-10 22:52:05,909 [salt.state       :1803][INFO    ][10252] Executing state service.running for [ceilometer-agent-central]
2018-10-10 22:52:05,911 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-10-10 22:52:05,936 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-10 22:52:05,958 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-10 22:52:05,976 [salt.state       :290 ][INFO    ][10252] The service ceilometer-agent-central is already running
2018-10-10 22:52:05,977 [salt.state       :1941][INFO    ][10252] Completed state [ceilometer-agent-central] at time 22:52:05.977126 duration_in_ms=69.212
2018-10-10 22:52:05,977 [salt.state       :1770][INFO    ][10252] Running state [ceilometer-agent-central] at time 22:52:05.977575
2018-10-10 22:52:05,978 [salt.state       :1803][INFO    ][10252] Executing state service.mod_watch for [ceilometer-agent-central]
2018-10-10 22:52:05,979 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-10 22:52:05,997 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-10 22:52:06,236 [salt.state       :290 ][INFO    ][10252] {'ceilometer-agent-central': True}
2018-10-10 22:52:06,237 [salt.state       :1941][INFO    ][10252] Completed state [ceilometer-agent-central] at time 22:52:06.237154 duration_in_ms=259.578
2018-10-10 22:52:06,255 [salt.state       :1770][INFO    ][10252] Running state [ceilometer-agent-notification] at time 22:52:06.255503
2018-10-10 22:52:06,255 [salt.state       :1803][INFO    ][10252] Executing state service.running for [ceilometer-agent-notification]
2018-10-10 22:52:06,257 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-10-10 22:52:06,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-10 22:52:06,333 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-10 22:52:06,366 [salt.state       :290 ][INFO    ][10252] The service ceilometer-agent-notification is already running
2018-10-10 22:52:06,366 [salt.state       :1941][INFO    ][10252] Completed state [ceilometer-agent-notification] at time 22:52:06.366718 duration_in_ms=111.214
2018-10-10 22:52:06,367 [salt.state       :1770][INFO    ][10252] Running state [ceilometer-agent-notification] at time 22:52:06.367056
2018-10-10 22:52:06,368 [salt.state       :1803][INFO    ][10252] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-10-10 22:52:06,369 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-10 22:52:06,405 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10252] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-10 22:52:06,594 [salt.state       :290 ][INFO    ][10252] {'ceilometer-agent-notification': True}
2018-10-10 22:52:06,595 [salt.state       :1941][INFO    ][10252] Completed state [ceilometer-agent-notification] at time 22:52:06.595283 duration_in_ms=228.226
2018-10-10 22:52:06,603 [salt.minion      :1708][INFO    ][10252] Returning information for job: 20181010225117698195
2018-10-10 22:59:09,092 [salt.minion      :1307][INFO    ][2952] User sudo_ubuntu Executing command cp.push_dir with jid 20181010225909083418
2018-10-10 22:59:09,122 [salt.minion      :1431][INFO    ][13264] Starting a new job with PID 13264
