2018-10-05 21:12:26,467 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:26,604 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:26,608 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:26,612 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:26,615 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:26,963 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:26,968 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:26,972 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,059 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,063 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,067 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,072 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,196 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,231 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,236 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,240 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,244 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,248 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,253 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,257 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,261 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,266 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,269 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,273 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,277 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,281 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,285 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,288 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,292 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,296 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,300 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,304 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,307 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,311 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,314 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,319 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,323 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,327 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,332 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,336 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,342 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,347 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,352 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,357 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,362 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,366 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,372 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,376 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,380 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,384 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,389 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,393 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,399 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,403 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,408 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,412 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:27,415 [salt.utils.decorators:82  ][ERROR   ][1714] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-05 21:12:52,346 [salt.utils.decorators:613 ][WARNING ][1714] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-05 21:12:55,143 [salt.loaded.int.states.file:2150][WARNING ][1714] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-05 21:12:57,778 [salt.loaded.int.states.file:2150][WARNING ][1714] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-05 21:12:59,496 [salt.loaded.int.states.file:2150][WARNING ][1714] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-05 21:13:04,106 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2918] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-10-05 21:13:04,146 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2918] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-10-05 21:13:04,181 [salt.utils.parsers:1051][WARNING ][1374] Minion received a SIGTERM. Exiting.
2018-10-05 21:13:05,180 [salt.cli.daemons :293 ][INFO    ][2970] Setting up the Salt Minion "mdb01.mcp-ovs-ha.local"
2018-10-05 21:13:05,313 [salt.cli.daemons :82  ][INFO    ][2970] Starting up the Salt Minion
2018-10-05 21:13:05,314 [salt.utils.event :1017][INFO    ][2970] Starting pull socket on /var/run/salt/minion/minion_event_b0741cc873_pull.ipc
2018-10-05 21:13:06,249 [salt.minion      :976 ][INFO    ][2970] Creating minion process manager
2018-10-05 21:13:07,975 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2970] Executing command ['date', '+%z'] in directory '/root'
2018-10-05 21:13:08,011 [salt.utils.schedule:568 ][INFO    ][2970] Updating job settings for scheduled job: __mine_interval
2018-10-05 21:13:08,021 [salt.minion      :1107][INFO    ][2970] Added mine.update to scheduler
2018-10-05 21:13:08,047 [salt.minion      :1965][INFO    ][2970] Minion is starting as user 'root'
2018-10-05 21:13:08,063 [salt.minion      :2324][INFO    ][2970] Minion is ready to receive requests!
2018-10-05 21:13:43,578 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.apply with jid 20181005211343565047
2018-10-05 21:13:43,604 [salt.minion      :1431][INFO    ][3059] Starting a new job with PID 3059
2018-10-05 21:13:49,909 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005211349898587
2018-10-05 21:13:49,944 [salt.minion      :1431][INFO    ][3064] Starting a new job with PID 3064
2018-10-05 21:13:49,972 [salt.minion      :1708][INFO    ][3064] Returning information for job: 20181005211349898587
2018-10-05 21:13:53,150 [salt.state       :905 ][INFO    ][3059] Loading fresh modules for state activity
2018-10-05 21:13:53,223 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-10-05 21:13:53,273 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-10-05 21:13:53,438 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-10-05 21:13:53,567 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-10-05 21:13:53,699 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-10-05 21:13:53,940 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-10-05 21:13:54,098 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-10-05 21:13:54,238 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-10-05 21:13:54,434 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-10-05 21:13:54,469 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-10-05 21:13:54,606 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-10-05 21:13:54,744 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-10-05 21:13:54,884 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-10-05 21:13:56,329 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-10-05 21:13:56,508 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-10-05 21:13:56,648 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-10-05 21:13:56,779 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-10-05 21:13:56,913 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-10-05 21:13:57,045 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-10-05 21:13:57,169 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-10-05 21:13:57,297 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-10-05 21:13:57,507 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-10-05 21:13:57,766 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-10-05 21:13:57,898 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-10-05 21:13:58,042 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-10-05 21:13:58,080 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-10-05 21:13:58,140 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-10-05 21:13:58,203 [salt.state       :1770][INFO    ][3059] Running state [/etc/environment] at time 21:13:58.203914
2018-10-05 21:13:58,206 [salt.state       :1803][INFO    ][3059] Executing state file.blockreplace for [/etc/environment]
2018-10-05 21:13:58,217 [salt.state       :290 ][INFO    ][3059] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-10-05 21:13:58,218 [salt.state       :1941][INFO    ][3059] Completed state [/etc/environment] at time 21:13:58.218203 duration_in_ms=14.29
2018-10-05 21:13:58,218 [salt.state       :1770][INFO    ][3059] Running state [/etc/profile.d] at time 21:13:58.218487
2018-10-05 21:13:58,218 [salt.state       :1803][INFO    ][3059] Executing state file.directory for [/etc/profile.d]
2018-10-05 21:13:58,227 [salt.state       :290 ][INFO    ][3059] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-10-05 21:13:58,227 [salt.state       :1941][INFO    ][3059] Completed state [/etc/profile.d] at time 21:13:58.227697 duration_in_ms=9.21
2018-10-05 21:13:59,041 [salt.state       :1770][INFO    ][3059] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 21:13:59.041805
2018-10-05 21:13:59,042 [salt.state       :1803][INFO    ][3059] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-10-05 21:13:59,706 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-10-05 21:13:59,737 [salt.state       :290 ][INFO    ][3059] File changed:
New file
2018-10-05 21:13:59,738 [salt.state       :1941][INFO    ][3059] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 21:13:59.738771 duration_in_ms=696.966
2018-10-05 21:13:59,739 [salt.state       :1770][INFO    ][3059] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 21:13:59.739542
2018-10-05 21:13:59,740 [salt.state       :1803][INFO    ][3059] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-10-05 21:13:59,770 [salt.state       :290 ][INFO    ][3059] File changed:
New file
2018-10-05 21:13:59,771 [salt.state       :1941][INFO    ][3059] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 21:13:59.771027 duration_in_ms=31.484
2018-10-05 21:13:59,773 [salt.state       :1770][INFO    ][3059] Running state [linux_repo_prereq_pkgs] at time 21:13:59.773242
2018-10-05 21:13:59,773 [salt.state       :1803][INFO    ][3059] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-10-05 21:13:59,774 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:14:00,130 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005211400116792
2018-10-05 21:14:00,160 [salt.minion      :1431][INFO    ][3137] Starting a new job with PID 3137
2018-10-05 21:14:00,181 [salt.minion      :1708][INFO    ][3137] Returning information for job: 20181005211400116792
2018-10-05 21:14:00,354 [salt.state       :290 ][INFO    ][3059] All specified packages are already installed
2018-10-05 21:14:00,355 [salt.state       :1941][INFO    ][3059] Completed state [linux_repo_prereq_pkgs] at time 21:14:00.355647 duration_in_ms=582.404
2018-10-05 21:14:00,356 [salt.state       :1770][INFO    ][3059] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 21:14:00.356181
2018-10-05 21:14:00,356 [salt.state       :1803][INFO    ][3059] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-10-05 21:14:00,357 [salt.state       :290 ][INFO    ][3059] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-10-05 21:14:00,357 [salt.state       :1941][INFO    ][3059] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 21:14:00.357701 duration_in_ms=1.52
2018-10-05 21:14:00,358 [salt.state       :1770][INFO    ][3059] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 21:14:00.357960
2018-10-05 21:14:00,358 [salt.state       :1803][INFO    ][3059] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-10-05 21:14:00,358 [salt.state       :290 ][INFO    ][3059] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-10-05 21:14:00,359 [salt.state       :1941][INFO    ][3059] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 21:14:00.359005 duration_in_ms=1.045
2018-10-05 21:14:00,359 [salt.state       :1770][INFO    ][3059] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 21:14:00.359258
2018-10-05 21:14:00,359 [salt.state       :1803][INFO    ][3059] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-10-05 21:14:00,382 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-10-05 21:14:00,512 [salt.state       :290 ][INFO    ][3059] File changed:
New file
2018-10-05 21:14:00,513 [salt.state       :1941][INFO    ][3059] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 21:14:00.513217 duration_in_ms=153.959
2018-10-05 21:14:00,516 [salt.state       :1770][INFO    ][3059] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 21:14:00.516833
2018-10-05 21:14:00,517 [salt.state       :1803][INFO    ][3059] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-10-05 21:14:00,836 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-10-05 21:14:01,293 [salt.state       :290 ][INFO    ][3059] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-10-05 21:14:01,293 [salt.state       :1941][INFO    ][3059] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 21:14:01.293685 duration_in_ms=776.852
2018-10-05 21:14:01,294 [salt.state       :1770][INFO    ][3059] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 21:14:01.294068
2018-10-05 21:14:01,294 [salt.state       :1803][INFO    ][3059] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-10-05 21:14:01,295 [salt.state       :290 ][INFO    ][3059] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-10-05 21:14:01,295 [salt.state       :1941][INFO    ][3059] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 21:14:01.295230 duration_in_ms=1.162
2018-10-05 21:14:01,296 [salt.state       :1770][INFO    ][3059] Running state [/etc/apt/preferences.d/uca] at time 21:14:01.296870
2018-10-05 21:14:01,297 [salt.state       :1803][INFO    ][3059] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-10-05 21:14:01,444 [salt.state       :290 ][INFO    ][3059] File changed:
New file
2018-10-05 21:14:01,445 [salt.state       :1941][INFO    ][3059] Completed state [/etc/apt/preferences.d/uca] at time 21:14:01.445893 duration_in_ms=149.022
2018-10-05 21:14:01,449 [salt.state       :1770][INFO    ][3059] Running state [echo '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' | base64 -d | apt-key add -] at time 21:14:01.449176
2018-10-05 21:14:01,449 [salt.state       :1803][INFO    ][3059] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-10-05 21:14:01,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-10-05 21:14:01,744 [salt.state       :290 ][INFO    ][3059] {'pid': 3273, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-10-05 21:14:01,745 [salt.state       :1941][INFO    ][3059] Completed state [echo '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' | base64 -d | apt-key add -] at time 21:14:01.745407 duration_in_ms=296.231
2018-10-05 21:14:01,750 [salt.state       :1770][INFO    ][3059] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 21:14:01.750694
2018-10-05 21:14:01,751 [salt.state       :1803][INFO    ][3059] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-10-05 21:14:01,893 [salt.state       :290 ][INFO    ][3059] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-10-05 21:14:01,893 [salt.state       :1941][INFO    ][3059] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 21:14:01.893583 duration_in_ms=142.89
2018-10-05 21:14:01,894 [salt.state       :1770][INFO    ][3059] Running state [pkg.refresh_db] at time 21:14:01.894641
2018-10-05 21:14:01,895 [salt.state       :1803][INFO    ][3059] Executing state module.run for [pkg.refresh_db]
2018-10-05 21:14:01,895 [salt.utils.decorators:613 ][WARNING ][3059] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-05 21:14:01,896 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-05 21:14:06,426 [salt.state       :290 ][INFO    ][3059] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': True, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': True, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-10-05 21:14:06,428 [salt.state       :1941][INFO    ][3059] Completed state [pkg.refresh_db] at time 21:14:06.428378 duration_in_ms=4533.736
2018-10-05 21:14:06,429 [salt.state       :1770][INFO    ][3059] Running state [linux_extra_packages_latest] at time 21:14:06.429686
2018-10-05 21:14:06,430 [salt.state       :1803][INFO    ][3059] Executing state pkg.latest for [linux_extra_packages_latest]
2018-10-05 21:14:06,448 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-10-05 21:14:06,708 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 21:14:06,742 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-10-05 21:14:10,152 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:14:10,200 [salt.state       :290 ][INFO    ][3059] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-10-05 21:14:10,229 [salt.state       :905 ][INFO    ][3059] Loading fresh modules for state activity
2018-10-05 21:14:10,282 [salt.state       :1941][INFO    ][3059] Completed state [linux_extra_packages_latest] at time 21:14:10.281926 duration_in_ms=3852.239
2018-10-05 21:14:10,290 [salt.state       :1770][INFO    ][3059] Running state [UTC] at time 21:14:10.290486
2018-10-05 21:14:10,291 [salt.state       :1803][INFO    ][3059] Executing state timezone.system for [UTC]
2018-10-05 21:14:10,297 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['timedatectl'] in directory '/root'
2018-10-05 21:14:10,390 [salt.state       :290 ][INFO    ][3059] Timezone UTC already set, UTC already set to UTC
2018-10-05 21:14:10,391 [salt.state       :1941][INFO    ][3059] Completed state [UTC] at time 21:14:10.391599 duration_in_ms=101.113
2018-10-05 21:14:10,396 [salt.state       :1770][INFO    ][3059] Running state [/etc/default/grub.d] at time 21:14:10.396292
2018-10-05 21:14:10,396 [salt.state       :1803][INFO    ][3059] Executing state file.directory for [/etc/default/grub.d]
2018-10-05 21:14:10,404 [salt.state       :290 ][INFO    ][3059] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-10-05 21:14:10,404 [salt.state       :1941][INFO    ][3059] Completed state [/etc/default/grub.d] at time 21:14:10.404740 duration_in_ms=8.448
2018-10-05 21:14:10,410 [salt.state       :1770][INFO    ][3059] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 21:14:10.410099
2018-10-05 21:14:10,410 [salt.state       :1803][INFO    ][3059] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2018-10-05 21:14:10,439 [salt.state       :290 ][INFO    ][3059] File changed:
New file
2018-10-05 21:14:10,439 [salt.state       :1941][INFO    ][3059] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 21:14:10.439589 duration_in_ms=29.49
2018-10-05 21:14:10,440 [salt.state       :1770][INFO    ][3059] Running state [update-grub] at time 21:14:10.440416
2018-10-05 21:14:10,440 [salt.state       :1803][INFO    ][3059] Executing state cmd.wait for [update-grub]
2018-10-05 21:14:10,441 [salt.state       :290 ][INFO    ][3059] No changes made for update-grub
2018-10-05 21:14:10,441 [salt.state       :1941][INFO    ][3059] Completed state [update-grub] at time 21:14:10.441521 duration_in_ms=1.105
2018-10-05 21:14:10,441 [salt.state       :1770][INFO    ][3059] Running state [update-grub] at time 21:14:10.441736
2018-10-05 21:14:10,441 [salt.state       :1803][INFO    ][3059] Executing state cmd.mod_watch for [update-grub]
2018-10-05 21:14:10,444 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'update-grub' in directory '/root'
2018-10-05 21:14:11,209 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005211410330012
2018-10-05 21:14:11,228 [salt.minion      :1431][INFO    ][4049] Starting a new job with PID 4049
2018-10-05 21:14:11,254 [salt.minion      :1708][INFO    ][4049] Returning information for job: 20181005211410330012
2018-10-05 21:14:12,093 [salt.state       :290 ][INFO    ][3059] {'pid': 3914, 'retcode': 0, 'stderr': 'Generating grub configuration file ...\nFound linux image: /boot/vmlinuz-4.15.0-36-generic\nFound initrd image: /boot/initrd.img-4.15.0-36-generic\nFound linux image: /boot/vmlinuz-4.4.0-137-generic\nFound initrd image: /boot/initrd.img-4.4.0-137-generic\ndone', 'stdout': ''}
2018-10-05 21:14:12,093 [salt.state       :1941][INFO    ][3059] Completed state [update-grub] at time 21:14:12.093698 duration_in_ms=1651.962
2018-10-05 21:14:12,101 [salt.state       :1770][INFO    ][3059] Running state [nf_conntrack] at time 21:14:12.101557
2018-10-05 21:14:12,101 [salt.state       :1803][INFO    ][3059] Executing state kmod.present for [nf_conntrack]
2018-10-05 21:14:12,102 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'lsmod' in directory '/root'
2018-10-05 21:14:12,577 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'lsmod' in directory '/root'
2018-10-05 21:14:12,598 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-10-05 21:14:12,626 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'lsmod' in directory '/root'
2018-10-05 21:14:12,796 [salt.state       :290 ][INFO    ][3059] {'nf_conntrack': 'loaded'}
2018-10-05 21:14:12,797 [salt.state       :1941][INFO    ][3059] Completed state [nf_conntrack] at time 21:14:12.797403 duration_in_ms=695.845
2018-10-05 21:14:12,803 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.tcp_keepalive_probes] at time 21:14:12.803326
2018-10-05 21:14:12,803 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-10-05 21:14:12,805 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-10-05 21:14:12,830 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.tcp_keepalive_probes': 8}
2018-10-05 21:14:12,833 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.tcp_keepalive_probes] at time 21:14:12.831829 duration_in_ms=28.502
2018-10-05 21:14:12,833 [salt.state       :1770][INFO    ][3059] Running state [fs.file-max] at time 21:14:12.833679
2018-10-05 21:14:12,834 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [fs.file-max]
2018-10-05 21:14:12,836 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-10-05 21:14:12,856 [salt.state       :290 ][INFO    ][3059] {'fs.file-max': 124165}
2018-10-05 21:14:12,857 [salt.state       :1941][INFO    ][3059] Completed state [fs.file-max] at time 21:14:12.857366 duration_in_ms=23.687
2018-10-05 21:14:12,860 [salt.state       :1770][INFO    ][3059] Running state [net.core.somaxconn] at time 21:14:12.860109
2018-10-05 21:14:12,861 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.core.somaxconn]
2018-10-05 21:14:12,864 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-10-05 21:14:12,888 [salt.state       :290 ][INFO    ][3059] {'net.core.somaxconn': 4096}
2018-10-05 21:14:12,889 [salt.state       :1941][INFO    ][3059] Completed state [net.core.somaxconn] at time 21:14:12.889827 duration_in_ms=29.718
2018-10-05 21:14:12,890 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.tcp_max_syn_backlog] at time 21:14:12.890497
2018-10-05 21:14:12,891 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-10-05 21:14:12,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-10-05 21:14:12,915 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-10-05 21:14:12,916 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.tcp_max_syn_backlog] at time 21:14:12.916537 duration_in_ms=26.039
2018-10-05 21:14:12,917 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.tcp_tw_reuse] at time 21:14:12.917617
2018-10-05 21:14:12,918 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-10-05 21:14:12,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-10-05 21:14:12,942 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.tcp_tw_reuse': 1}
2018-10-05 21:14:12,944 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.tcp_tw_reuse] at time 21:14:12.943984 duration_in_ms=26.367
2018-10-05 21:14:12,944 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.tcp_congestion_control] at time 21:14:12.944659
2018-10-05 21:14:12,946 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-10-05 21:14:12,948 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-10-05 21:14:13,006 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-10-05 21:14:13,007 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.tcp_congestion_control] at time 21:14:13.007290 duration_in_ms=62.631
2018-10-05 21:14:13,007 [salt.state       :1770][INFO    ][3059] Running state [net.nf_conntrack_max] at time 21:14:13.007723
2018-10-05 21:14:13,008 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.nf_conntrack_max]
2018-10-05 21:14:13,010 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-10-05 21:14:13,027 [salt.state       :290 ][INFO    ][3059] {'net.nf_conntrack_max': 1048576}
2018-10-05 21:14:13,027 [salt.state       :1941][INFO    ][3059] Completed state [net.nf_conntrack_max] at time 21:14:13.027469 duration_in_ms=19.746
2018-10-05 21:14:13,027 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.tcp_retries2] at time 21:14:13.027889
2018-10-05 21:14:13,028 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-10-05 21:14:13,030 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-10-05 21:14:13,044 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.tcp_retries2': 5}
2018-10-05 21:14:13,045 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.tcp_retries2] at time 21:14:13.045543 duration_in_ms=17.654
2018-10-05 21:14:13,045 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.tcp_fin_timeout] at time 21:14:13.045949
2018-10-05 21:14:13,046 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-10-05 21:14:13,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-10-05 21:14:13,134 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.tcp_fin_timeout': 30}
2018-10-05 21:14:13,135 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.tcp_fin_timeout] at time 21:14:13.135073 duration_in_ms=89.123
2018-10-05 21:14:13,135 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.tcp_slow_start_after_idle] at time 21:14:13.135487
2018-10-05 21:14:13,135 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-10-05 21:14:13,217 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-10-05 21:14:13,233 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-10-05 21:14:13,233 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 21:14:13.233821 duration_in_ms=98.334
2018-10-05 21:14:13,234 [salt.state       :1770][INFO    ][3059] Running state [vm.swappiness] at time 21:14:13.234247
2018-10-05 21:14:13,234 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [vm.swappiness]
2018-10-05 21:14:13,272 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-10-05 21:14:13,289 [salt.state       :290 ][INFO    ][3059] {'vm.swappiness': 10}
2018-10-05 21:14:13,289 [salt.state       :1941][INFO    ][3059] Completed state [vm.swappiness] at time 21:14:13.289509 duration_in_ms=55.262
2018-10-05 21:14:13,289 [salt.state       :1770][INFO    ][3059] Running state [net.core.netdev_max_backlog] at time 21:14:13.289942
2018-10-05 21:14:13,290 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-10-05 21:14:13,319 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-10-05 21:14:13,334 [salt.state       :290 ][INFO    ][3059] {'net.core.netdev_max_backlog': 261144}
2018-10-05 21:14:13,334 [salt.state       :1941][INFO    ][3059] Completed state [net.core.netdev_max_backlog] at time 21:14:13.334458 duration_in_ms=44.516
2018-10-05 21:14:13,334 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.neigh.default.gc_thresh1] at time 21:14:13.334869
2018-10-05 21:14:13,335 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-10-05 21:14:13,384 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-10-05 21:14:13,403 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-10-05 21:14:13,403 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 21:14:13.403534 duration_in_ms=68.665
2018-10-05 21:14:13,404 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.neigh.default.gc_thresh2] at time 21:14:13.403957
2018-10-05 21:14:13,404 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-10-05 21:14:13,406 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-10-05 21:14:13,423 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-10-05 21:14:13,424 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 21:14:13.424230 duration_in_ms=20.273
2018-10-05 21:14:13,425 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.neigh.default.gc_thresh3] at time 21:14:13.425506
2018-10-05 21:14:13,425 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-10-05 21:14:13,427 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-10-05 21:14:13,445 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-10-05 21:14:13,446 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 21:14:13.446365 duration_in_ms=20.858
2018-10-05 21:14:13,447 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.tcp_keepalive_intvl] at time 21:14:13.447042
2018-10-05 21:14:13,447 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-10-05 21:14:13,448 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-10-05 21:14:13,465 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-10-05 21:14:13,466 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.tcp_keepalive_intvl] at time 21:14:13.466021 duration_in_ms=18.979
2018-10-05 21:14:13,466 [salt.state       :1770][INFO    ][3059] Running state [net.ipv4.tcp_keepalive_time] at time 21:14:13.466438
2018-10-05 21:14:13,466 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-10-05 21:14:13,468 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-10-05 21:14:13,484 [salt.state       :290 ][INFO    ][3059] {'net.ipv4.tcp_keepalive_time': 30}
2018-10-05 21:14:13,485 [salt.state       :1941][INFO    ][3059] Completed state [net.ipv4.tcp_keepalive_time] at time 21:14:13.485395 duration_in_ms=18.957
2018-10-05 21:14:13,486 [salt.state       :1770][INFO    ][3059] Running state [kernel.panic] at time 21:14:13.486105
2018-10-05 21:14:13,486 [salt.state       :1803][INFO    ][3059] Executing state sysctl.present for [kernel.panic]
2018-10-05 21:14:13,487 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-10-05 21:14:13,502 [salt.state       :290 ][INFO    ][3059] {'kernel.panic': 60}
2018-10-05 21:14:13,502 [salt.state       :1941][INFO    ][3059] Completed state [kernel.panic] at time 21:14:13.502718 duration_in_ms=16.613
2018-10-05 21:14:13,512 [salt.state       :1770][INFO    ][3059] Running state [linux_sysfs_package] at time 21:14:13.512478
2018-10-05 21:14:13,513 [salt.state       :1803][INFO    ][3059] Executing state pkg.installed for [linux_sysfs_package]
2018-10-05 21:14:14,423 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-10-05 21:14:14,815 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-05 21:14:17,004 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 21:14:17,043 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-10-05 21:14:20,534 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005211420521743
2018-10-05 21:14:20,557 [salt.minion      :1431][INFO    ][5137] Starting a new job with PID 5137
2018-10-05 21:14:20,591 [salt.minion      :1708][INFO    ][5137] Returning information for job: 20181005211420521743
2018-10-05 21:14:21,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:14:21,642 [salt.state       :290 ][INFO    ][3059] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-10-05 21:14:21,667 [salt.state       :905 ][INFO    ][3059] Loading fresh modules for state activity
2018-10-05 21:14:21,722 [salt.state       :1941][INFO    ][3059] Completed state [linux_sysfs_package] at time 21:14:21.722216 duration_in_ms=8209.737
2018-10-05 21:14:21,728 [salt.state       :1770][INFO    ][3059] Running state [/etc/sysfs.d] at time 21:14:21.728250
2018-10-05 21:14:21,728 [salt.state       :1803][INFO    ][3059] Executing state file.directory for [/etc/sysfs.d]
2018-10-05 21:14:21,734 [salt.state       :290 ][INFO    ][3059] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-10-05 21:14:21,735 [salt.state       :1941][INFO    ][3059] Completed state [/etc/sysfs.d] at time 21:14:21.735027 duration_in_ms=6.777
2018-10-05 21:14:22,331 [salt.state       :1770][INFO    ][3059] Running state [ondemand] at time 21:14:22.331711
2018-10-05 21:14:22,332 [salt.state       :1803][INFO    ][3059] Executing state service.dead for [ondemand]
2018-10-05 21:14:22,333 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-10-05 21:14:22,353 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-05 21:14:22,371 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-05 21:14:22,395 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-10-05 21:14:22,480 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-05 21:14:22,509 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-05 21:14:22,539 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-05 21:14:22,569 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-10-05 21:14:22,800 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-05 21:14:22,837 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'runlevel' in directory '/root'
2018-10-05 21:14:22,854 [salt.state       :290 ][INFO    ][3059] {'ondemand': True}
2018-10-05 21:14:22,855 [salt.state       :1941][INFO    ][3059] Completed state [ondemand] at time 21:14:22.855905 duration_in_ms=524.195
2018-10-05 21:14:22,857 [salt.state       :1770][INFO    ][3059] Running state [en_US.UTF-8] at time 21:14:22.857890
2018-10-05 21:14:22,858 [salt.state       :1803][INFO    ][3059] Executing state locale.present for [en_US.UTF-8]
2018-10-05 21:14:22,860 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'locale -a' in directory '/root'
2018-10-05 21:14:22,874 [salt.state       :290 ][INFO    ][3059] Locale en_US.UTF-8 is already present
2018-10-05 21:14:22,875 [salt.state       :1941][INFO    ][3059] Completed state [en_US.UTF-8] at time 21:14:22.875745 duration_in_ms=17.855
2018-10-05 21:14:22,879 [salt.state       :1770][INFO    ][3059] Running state [en_US.UTF-8] at time 21:14:22.879796
2018-10-05 21:14:22,880 [salt.state       :1803][INFO    ][3059] Executing state locale.system for [en_US.UTF-8]
2018-10-05 21:14:22,881 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'localectl' in directory '/root'
2018-10-05 21:14:22,938 [salt.state       :290 ][INFO    ][3059] System locale en_US.UTF-8 already set
2018-10-05 21:14:22,938 [salt.state       :1941][INFO    ][3059] Completed state [en_US.UTF-8] at time 21:14:22.938775 duration_in_ms=58.978
2018-10-05 21:14:22,940 [salt.state       :1770][INFO    ][3059] Running state [root] at time 21:14:22.940521
2018-10-05 21:14:22,944 [salt.state       :1803][INFO    ][3059] Executing state group.present for [root]
2018-10-05 21:14:22,946 [salt.state       :290 ][INFO    ][3059] Group root is present and up to date
2018-10-05 21:14:22,947 [salt.state       :1941][INFO    ][3059] Completed state [root] at time 21:14:22.947551 duration_in_ms=7.03
2018-10-05 21:14:22,951 [salt.state       :1770][INFO    ][3059] Running state [root] at time 21:14:22.951469
2018-10-05 21:14:22,952 [salt.state       :1803][INFO    ][3059] Executing state user.present for [root]
2018-10-05 21:14:22,963 [salt.state       :290 ][INFO    ][3059] User root is present and up to date
2018-10-05 21:14:22,963 [salt.state       :1941][INFO    ][3059] Completed state [root] at time 21:14:22.963857 duration_in_ms=12.386
2018-10-05 21:14:22,966 [salt.state       :1770][INFO    ][3059] Running state [/root] at time 21:14:22.966089
2018-10-05 21:14:22,966 [salt.state       :1803][INFO    ][3059] Executing state file.directory for [/root]
2018-10-05 21:14:22,968 [salt.state       :290 ][INFO    ][3059] Directory /root is in the correct state
Directory /root updated
2018-10-05 21:14:22,968 [salt.state       :1941][INFO    ][3059] Completed state [/root] at time 21:14:22.968255 duration_in_ms=2.167
2018-10-05 21:14:22,968 [salt.state       :1770][INFO    ][3059] Running state [/etc/sudoers.d/90-salt-user-root] at time 21:14:22.968501
2018-10-05 21:14:22,969 [salt.state       :1803][INFO    ][3059] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-10-05 21:14:22,969 [salt.state       :290 ][INFO    ][3059] File /etc/sudoers.d/90-salt-user-root is not present
2018-10-05 21:14:22,969 [salt.state       :1941][INFO    ][3059] Completed state [/etc/sudoers.d/90-salt-user-root] at time 21:14:22.969916 duration_in_ms=1.415
2018-10-05 21:14:22,970 [salt.state       :1770][INFO    ][3059] Running state [ubuntu] at time 21:14:22.970455
2018-10-05 21:14:22,971 [salt.state       :1803][INFO    ][3059] Executing state group.present for [ubuntu]
2018-10-05 21:14:22,971 [salt.state       :290 ][INFO    ][3059] Group ubuntu is present and up to date
2018-10-05 21:14:22,971 [salt.state       :1941][INFO    ][3059] Completed state [ubuntu] at time 21:14:22.971805 duration_in_ms=1.35
2018-10-05 21:14:22,973 [salt.state       :1770][INFO    ][3059] Running state [ubuntu] at time 21:14:22.973633
2018-10-05 21:14:22,973 [salt.state       :1803][INFO    ][3059] Executing state user.present for [ubuntu]
2018-10-05 21:14:22,979 [salt.state       :290 ][INFO    ][3059] {'passwd': 'XXX-REDACTED-XXX'}
2018-10-05 21:14:22,979 [salt.state       :1941][INFO    ][3059] Completed state [ubuntu] at time 21:14:22.979403 duration_in_ms=5.77
2018-10-05 21:14:22,980 [salt.state       :1770][INFO    ][3059] Running state [/home/ubuntu] at time 21:14:22.980558
2018-10-05 21:14:22,981 [salt.state       :1803][INFO    ][3059] Executing state file.directory for [/home/ubuntu]
2018-10-05 21:14:22,983 [salt.state       :290 ][INFO    ][3059] {'mode': '0700'}
2018-10-05 21:14:22,983 [salt.state       :1941][INFO    ][3059] Completed state [/home/ubuntu] at time 21:14:22.983259 duration_in_ms=2.701
2018-10-05 21:14:22,984 [salt.state       :1770][INFO    ][3059] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 21:14:22.984248
2018-10-05 21:14:22,984 [salt.state       :1803][INFO    ][3059] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-10-05 21:14:23,008 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-10-05 21:14:23,027 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.JtwG3J' in directory '/root'
2018-10-05 21:14:23,063 [salt.state       :290 ][INFO    ][3059] File changed:
New file
2018-10-05 21:14:23,064 [salt.state       :1941][INFO    ][3059] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 21:14:23.064166 duration_in_ms=79.917
2018-10-05 21:14:23,064 [salt.state       :1770][INFO    ][3059] Running state [/etc/security/limits.d/90-salt-default.conf] at time 21:14:23.064550
2018-10-05 21:14:23,065 [salt.state       :1803][INFO    ][3059] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-10-05 21:14:23,090 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-10-05 21:14:23,218 [salt.state       :290 ][INFO    ][3059] File changed:
New file
2018-10-05 21:14:23,218 [salt.state       :1941][INFO    ][3059] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 21:14:23.218707 duration_in_ms=154.157
2018-10-05 21:14:23,219 [salt.state       :1770][INFO    ][3059] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 21:14:23.218987
2018-10-05 21:14:23,219 [salt.state       :1803][INFO    ][3059] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-10-05 21:14:23,239 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-10-05 21:14:23,358 [salt.state       :290 ][INFO    ][3059] File changed:
New file
2018-10-05 21:14:23,359 [salt.state       :1941][INFO    ][3059] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 21:14:23.359065 duration_in_ms=140.078
2018-10-05 21:14:23,361 [salt.state       :1770][INFO    ][3059] Running state [service.systemctl_reload] at time 21:14:23.361757
2018-10-05 21:14:23,362 [salt.state       :1803][INFO    ][3059] Executing state module.wait for [service.systemctl_reload]
2018-10-05 21:14:23,362 [salt.state       :290 ][INFO    ][3059] No changes made for service.systemctl_reload
2018-10-05 21:14:23,362 [salt.state       :1941][INFO    ][3059] Completed state [service.systemctl_reload] at time 21:14:23.362824 duration_in_ms=1.067
2018-10-05 21:14:23,363 [salt.state       :1770][INFO    ][3059] Running state [service.systemctl_reload] at time 21:14:23.363037
2018-10-05 21:14:23,363 [salt.state       :1803][INFO    ][3059] Executing state module.mod_watch for [service.systemctl_reload]
2018-10-05 21:14:23,363 [salt.utils.decorators:613 ][WARNING ][3059] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-05 21:14:23,364 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-10-05 21:14:23,512 [salt.state       :290 ][INFO    ][3059] {'ret': True}
2018-10-05 21:14:23,513 [salt.state       :1941][INFO    ][3059] Completed state [service.systemctl_reload] at time 21:14:23.513466 duration_in_ms=150.428
2018-10-05 21:14:23,514 [salt.state       :1770][INFO    ][3059] Running state [/etc/issue] at time 21:14:23.513989
2018-10-05 21:14:23,514 [salt.state       :1803][INFO    ][3059] Executing state file.managed for [/etc/issue]
2018-10-05 21:14:23,531 [salt.state       :290 ][INFO    ][3059] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-10-05 21:14:23,531 [salt.state       :1941][INFO    ][3059] Completed state [/etc/issue] at time 21:14:23.531567 duration_in_ms=17.578
2018-10-05 21:14:23,532 [salt.state       :1770][INFO    ][3059] Running state [/etc/hostname] at time 21:14:23.531949
2018-10-05 21:14:23,532 [salt.state       :1803][INFO    ][3059] Executing state file.managed for [/etc/hostname]
2018-10-05 21:14:24,660 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-10-05 21:14:24,676 [salt.state       :290 ][INFO    ][3059] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb01

2018-10-05 21:14:24,677 [salt.state       :1941][INFO    ][3059] Completed state [/etc/hostname] at time 21:14:24.677714 duration_in_ms=1145.764
2018-10-05 21:14:24,682 [salt.state       :1770][INFO    ][3059] Running state [hostname mdb01] at time 21:14:24.682739
2018-10-05 21:14:24,683 [salt.state       :1803][INFO    ][3059] Executing state cmd.run for [hostname mdb01]
2018-10-05 21:14:24,684 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'test "$(hostname)" = "mdb01"' in directory '/root'
2018-10-05 21:14:24,709 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command 'hostname mdb01' in directory '/root'
2018-10-05 21:14:24,730 [salt.state       :290 ][INFO    ][3059] {'pid': 5325, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-05 21:14:24,731 [salt.state       :1941][INFO    ][3059] Completed state [hostname mdb01] at time 21:14:24.731036 duration_in_ms=48.296
2018-10-05 21:14:24,733 [salt.state       :1770][INFO    ][3059] Running state [mdb02] at time 21:14:24.733181
2018-10-05 21:14:24,733 [salt.state       :1803][INFO    ][3059] Executing state host.present for [mdb02]
2018-10-05 21:14:24,735 [salt.state       :290 ][INFO    ][3059] {'host': 'mdb02'}
2018-10-05 21:14:24,735 [salt.state       :1941][INFO    ][3059] Completed state [mdb02] at time 21:14:24.735425 duration_in_ms=2.244
2018-10-05 21:14:24,735 [salt.state       :1770][INFO    ][3059] Running state [mdb02.mcp-ovs-ha.local] at time 21:14:24.735776
2018-10-05 21:14:24,736 [salt.state       :1803][INFO    ][3059] Executing state host.present for [mdb02.mcp-ovs-ha.local]
2018-10-05 21:14:24,738 [salt.state       :290 ][INFO    ][3059] {'host': 'mdb02.mcp-ovs-ha.local'}
2018-10-05 21:14:24,738 [salt.state       :1941][INFO    ][3059] Completed state [mdb02.mcp-ovs-ha.local] at time 21:14:24.738384 duration_in_ms=2.608
2018-10-05 21:14:24,738 [salt.state       :1770][INFO    ][3059] Running state [mdb03] at time 21:14:24.738716
2018-10-05 21:14:24,738 [salt.state       :1803][INFO    ][3059] Executing state host.present for [mdb03]
2018-10-05 21:14:24,740 [salt.state       :290 ][INFO    ][3059] {'host': 'mdb03'}
2018-10-05 21:14:24,740 [salt.state       :1941][INFO    ][3059] Completed state [mdb03] at time 21:14:24.740369 duration_in_ms=1.653
2018-10-05 21:14:24,741 [salt.state       :1770][INFO    ][3059] Running state [mdb03.mcp-ovs-ha.local] at time 21:14:24.741568
2018-10-05 21:14:24,742 [salt.state       :1803][INFO    ][3059] Executing state host.present for [mdb03.mcp-ovs-ha.local]
2018-10-05 21:14:24,743 [salt.state       :290 ][INFO    ][3059] {'host': 'mdb03.mcp-ovs-ha.local'}
2018-10-05 21:14:24,743 [salt.state       :1941][INFO    ][3059] Completed state [mdb03.mcp-ovs-ha.local] at time 21:14:24.743520 duration_in_ms=1.952
2018-10-05 21:14:24,744 [salt.state       :1770][INFO    ][3059] Running state [mdb01] at time 21:14:24.744112
2018-10-05 21:14:24,744 [salt.state       :1803][INFO    ][3059] Executing state host.present for [mdb01]
2018-10-05 21:14:24,745 [salt.state       :290 ][INFO    ][3059] {'host': 'mdb01'}
2018-10-05 21:14:24,745 [salt.state       :1941][INFO    ][3059] Completed state [mdb01] at time 21:14:24.745533 duration_in_ms=1.421
2018-10-05 21:14:24,745 [salt.state       :1770][INFO    ][3059] Running state [mdb01.mcp-ovs-ha.local] at time 21:14:24.745841
2018-10-05 21:14:24,746 [salt.state       :1803][INFO    ][3059] Executing state host.present for [mdb01.mcp-ovs-ha.local]
2018-10-05 21:14:24,747 [salt.state       :290 ][INFO    ][3059] {'host': 'mdb01.mcp-ovs-ha.local'}
2018-10-05 21:14:24,747 [salt.state       :1941][INFO    ][3059] Completed state [mdb01.mcp-ovs-ha.local] at time 21:14:24.747786 duration_in_ms=1.945
2018-10-05 21:14:24,748 [salt.state       :1770][INFO    ][3059] Running state [mdb] at time 21:14:24.748088
2018-10-05 21:14:24,748 [salt.state       :1803][INFO    ][3059] Executing state host.present for [mdb]
2018-10-05 21:14:24,752 [salt.state       :290 ][INFO    ][3059] {'host': 'mdb'}
2018-10-05 21:14:24,752 [salt.state       :1941][INFO    ][3059] Completed state [mdb] at time 21:14:24.752721 duration_in_ms=4.632
2018-10-05 21:14:24,753 [salt.state       :1770][INFO    ][3059] Running state [mdb.mcp-ovs-ha.local] at time 21:14:24.753067
2018-10-05 21:14:24,753 [salt.state       :1803][INFO    ][3059] Executing state host.present for [mdb.mcp-ovs-ha.local]
2018-10-05 21:14:24,754 [salt.state       :290 ][INFO    ][3059] {'host': 'mdb.mcp-ovs-ha.local'}
2018-10-05 21:14:24,754 [salt.state       :1941][INFO    ][3059] Completed state [mdb.mcp-ovs-ha.local] at time 21:14:24.754767 duration_in_ms=1.701
2018-10-05 21:14:24,755 [salt.state       :1770][INFO    ][3059] Running state [cfg01] at time 21:14:24.755081
2018-10-05 21:14:24,755 [salt.state       :1803][INFO    ][3059] Executing state host.present for [cfg01]
2018-10-05 21:14:24,756 [salt.state       :290 ][INFO    ][3059] {'host': 'cfg01'}
2018-10-05 21:14:24,757 [salt.state       :1941][INFO    ][3059] Completed state [cfg01] at time 21:14:24.757901 duration_in_ms=2.82
2018-10-05 21:14:24,758 [salt.state       :1770][INFO    ][3059] Running state [cfg01.mcp-ovs-ha.local] at time 21:14:24.758209
2018-10-05 21:14:24,758 [salt.state       :1803][INFO    ][3059] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-05 21:14:24,759 [salt.state       :290 ][INFO    ][3059] {'host': 'cfg01.mcp-ovs-ha.local'}
2018-10-05 21:14:24,759 [salt.state       :1941][INFO    ][3059] Completed state [cfg01.mcp-ovs-ha.local] at time 21:14:24.759882 duration_in_ms=1.673
2018-10-05 21:14:24,760 [salt.state       :1770][INFO    ][3059] Running state [prx01] at time 21:14:24.760189
2018-10-05 21:14:24,760 [salt.state       :1803][INFO    ][3059] Executing state host.present for [prx01]
2018-10-05 21:14:24,761 [salt.state       :290 ][INFO    ][3059] {'host': 'prx01'}
2018-10-05 21:14:24,761 [salt.state       :1941][INFO    ][3059] Completed state [prx01] at time 21:14:24.761607 duration_in_ms=1.417
2018-10-05 21:14:24,762 [salt.state       :1770][INFO    ][3059] Running state [prx01.mcp-ovs-ha.local] at time 21:14:24.761919
2018-10-05 21:14:24,762 [salt.state       :1803][INFO    ][3059] Executing state host.present for [prx01.mcp-ovs-ha.local]
2018-10-05 21:14:24,763 [salt.state       :290 ][INFO    ][3059] {'host': 'prx01.mcp-ovs-ha.local'}
2018-10-05 21:14:24,763 [salt.state       :1941][INFO    ][3059] Completed state [prx01.mcp-ovs-ha.local] at time 21:14:24.763600 duration_in_ms=1.681
2018-10-05 21:14:24,763 [salt.state       :1770][INFO    ][3059] Running state [kvm01] at time 21:14:24.763907
2018-10-05 21:14:24,764 [salt.state       :1803][INFO    ][3059] Executing state host.present for [kvm01]
2018-10-05 21:14:24,765 [salt.state       :290 ][INFO    ][3059] {'host': 'kvm01'}
2018-10-05 21:14:24,765 [salt.state       :1941][INFO    ][3059] Completed state [kvm01] at time 21:14:24.765345 duration_in_ms=1.438
2018-10-05 21:14:24,765 [salt.state       :1770][INFO    ][3059] Running state [kvm01.mcp-ovs-ha.local] at time 21:14:24.765686
2018-10-05 21:14:24,765 [salt.state       :1803][INFO    ][3059] Executing state host.present for [kvm01.mcp-ovs-ha.local]
2018-10-05 21:14:24,767 [salt.state       :290 ][INFO    ][3059] {'host': 'kvm01.mcp-ovs-ha.local'}
2018-10-05 21:14:24,768 [salt.state       :1941][INFO    ][3059] Completed state [kvm01.mcp-ovs-ha.local] at time 21:14:24.768207 duration_in_ms=2.521
2018-10-05 21:14:24,768 [salt.state       :1770][INFO    ][3059] Running state [kvm03] at time 21:14:24.768526
2018-10-05 21:14:24,769 [salt.state       :1803][INFO    ][3059] Executing state host.present for [kvm03]
2018-10-05 21:14:24,770 [salt.state       :290 ][INFO    ][3059] {'host': 'kvm03'}
2018-10-05 21:14:24,771 [salt.state       :1941][INFO    ][3059] Completed state [kvm03] at time 21:14:24.771141 duration_in_ms=2.615
2018-10-05 21:14:24,771 [salt.state       :1770][INFO    ][3059] Running state [kvm03.mcp-ovs-ha.local] at time 21:14:24.771461
2018-10-05 21:14:24,771 [salt.state       :1803][INFO    ][3059] Executing state host.present for [kvm03.mcp-ovs-ha.local]
2018-10-05 21:14:24,772 [salt.state       :290 ][INFO    ][3059] {'host': 'kvm03.mcp-ovs-ha.local'}
2018-10-05 21:14:24,773 [salt.state       :1941][INFO    ][3059] Completed state [kvm03.mcp-ovs-ha.local] at time 21:14:24.773217 duration_in_ms=1.755
2018-10-05 21:14:24,773 [salt.state       :1770][INFO    ][3059] Running state [kvm02] at time 21:14:24.773564
2018-10-05 21:14:24,773 [salt.state       :1803][INFO    ][3059] Executing state host.present for [kvm02]
2018-10-05 21:14:24,775 [salt.state       :290 ][INFO    ][3059] {'host': 'kvm02'}
2018-10-05 21:14:24,775 [salt.state       :1941][INFO    ][3059] Completed state [kvm02] at time 21:14:24.775552 duration_in_ms=1.988
2018-10-05 21:14:24,775 [salt.state       :1770][INFO    ][3059] Running state [kvm02.mcp-ovs-ha.local] at time 21:14:24.775866
2018-10-05 21:14:24,776 [salt.state       :1803][INFO    ][3059] Executing state host.present for [kvm02.mcp-ovs-ha.local]
2018-10-05 21:14:24,777 [salt.state       :290 ][INFO    ][3059] {'host': 'kvm02.mcp-ovs-ha.local'}
2018-10-05 21:14:24,777 [salt.state       :1941][INFO    ][3059] Completed state [kvm02.mcp-ovs-ha.local] at time 21:14:24.777663 duration_in_ms=1.796
2018-10-05 21:14:24,778 [salt.state       :1770][INFO    ][3059] Running state [dbs] at time 21:14:24.778275
2018-10-05 21:14:24,778 [salt.state       :1803][INFO    ][3059] Executing state host.present for [dbs]
2018-10-05 21:14:24,779 [salt.state       :290 ][INFO    ][3059] {'host': 'dbs'}
2018-10-05 21:14:24,779 [salt.state       :1941][INFO    ][3059] Completed state [dbs] at time 21:14:24.779730 duration_in_ms=1.454
2018-10-05 21:14:24,780 [salt.state       :1770][INFO    ][3059] Running state [dbs.mcp-ovs-ha.local] at time 21:14:24.780056
2018-10-05 21:14:24,780 [salt.state       :1803][INFO    ][3059] Executing state host.present for [dbs.mcp-ovs-ha.local]
2018-10-05 21:14:24,782 [salt.state       :290 ][INFO    ][3059] {'host': 'dbs.mcp-ovs-ha.local'}
2018-10-05 21:14:24,782 [salt.state       :1941][INFO    ][3059] Completed state [dbs.mcp-ovs-ha.local] at time 21:14:24.782474 duration_in_ms=2.418
2018-10-05 21:14:24,782 [salt.state       :1770][INFO    ][3059] Running state [prx] at time 21:14:24.782795
2018-10-05 21:14:24,783 [salt.state       :1803][INFO    ][3059] Executing state host.present for [prx]
2018-10-05 21:14:24,784 [salt.state       :290 ][INFO    ][3059] {'host': 'prx'}
2018-10-05 21:14:24,784 [salt.state       :1941][INFO    ][3059] Completed state [prx] at time 21:14:24.784860 duration_in_ms=2.065
2018-10-05 21:14:24,785 [salt.state       :1770][INFO    ][3059] Running state [prx.mcp-ovs-ha.local] at time 21:14:24.785183
2018-10-05 21:14:24,785 [salt.state       :1803][INFO    ][3059] Executing state host.present for [prx.mcp-ovs-ha.local]
2018-10-05 21:14:24,787 [salt.state       :290 ][INFO    ][3059] {'host': 'prx.mcp-ovs-ha.local'}
2018-10-05 21:14:24,787 [salt.state       :1941][INFO    ][3059] Completed state [prx.mcp-ovs-ha.local] at time 21:14:24.787735 duration_in_ms=2.552
2018-10-05 21:14:24,788 [salt.state       :1770][INFO    ][3059] Running state [prx02] at time 21:14:24.788062
2018-10-05 21:14:24,788 [salt.state       :1803][INFO    ][3059] Executing state host.present for [prx02]
2018-10-05 21:14:24,789 [salt.state       :290 ][INFO    ][3059] {'host': 'prx02'}
2018-10-05 21:14:24,789 [salt.state       :1941][INFO    ][3059] Completed state [prx02] at time 21:14:24.789888 duration_in_ms=1.825
2018-10-05 21:14:24,790 [salt.state       :1770][INFO    ][3059] Running state [prx02.mcp-ovs-ha.local] at time 21:14:24.790209
2018-10-05 21:14:24,790 [salt.state       :1803][INFO    ][3059] Executing state host.present for [prx02.mcp-ovs-ha.local]
2018-10-05 21:14:24,791 [salt.state       :290 ][INFO    ][3059] {'host': 'prx02.mcp-ovs-ha.local'}
2018-10-05 21:14:24,792 [salt.state       :1941][INFO    ][3059] Completed state [prx02.mcp-ovs-ha.local] at time 21:14:24.791984 duration_in_ms=1.775
2018-10-05 21:14:24,792 [salt.state       :1770][INFO    ][3059] Running state [msg02] at time 21:14:24.792306
2018-10-05 21:14:24,792 [salt.state       :1803][INFO    ][3059] Executing state host.present for [msg02]
2018-10-05 21:14:24,794 [salt.state       :290 ][INFO    ][3059] {'host': 'msg02'}
2018-10-05 21:14:24,794 [salt.state       :1941][INFO    ][3059] Completed state [msg02] at time 21:14:24.794460 duration_in_ms=2.154
2018-10-05 21:14:24,794 [salt.state       :1770][INFO    ][3059] Running state [msg02.mcp-ovs-ha.local] at time 21:14:24.794781
2018-10-05 21:14:24,795 [salt.state       :1803][INFO    ][3059] Executing state host.present for [msg02.mcp-ovs-ha.local]
2018-10-05 21:14:24,796 [salt.state       :290 ][INFO    ][3059] {'host': 'msg02.mcp-ovs-ha.local'}
2018-10-05 21:14:24,796 [salt.state       :1941][INFO    ][3059] Completed state [msg02.mcp-ovs-ha.local] at time 21:14:24.796541 duration_in_ms=1.76
2018-10-05 21:14:24,796 [salt.state       :1770][INFO    ][3059] Running state [msg03] at time 21:14:24.796903
2018-10-05 21:14:24,797 [salt.state       :1803][INFO    ][3059] Executing state host.present for [msg03]
2018-10-05 21:14:24,798 [salt.state       :290 ][INFO    ][3059] {'host': 'msg03'}
2018-10-05 21:14:24,798 [salt.state       :1941][INFO    ][3059] Completed state [msg03] at time 21:14:24.798707 duration_in_ms=1.804
2018-10-05 21:14:24,799 [salt.state       :1770][INFO    ][3059] Running state [msg03.mcp-ovs-ha.local] at time 21:14:24.799036
2018-10-05 21:14:24,799 [salt.state       :1803][INFO    ][3059] Executing state host.present for [msg03.mcp-ovs-ha.local]
2018-10-05 21:14:24,800 [salt.state       :290 ][INFO    ][3059] {'host': 'msg03.mcp-ovs-ha.local'}
2018-10-05 21:14:24,801 [salt.state       :1941][INFO    ][3059] Completed state [msg03.mcp-ovs-ha.local] at time 21:14:24.801168 duration_in_ms=2.132
2018-10-05 21:14:24,801 [salt.state       :1770][INFO    ][3059] Running state [msg01] at time 21:14:24.801547
2018-10-05 21:14:24,802 [salt.state       :1803][INFO    ][3059] Executing state host.present for [msg01]
2018-10-05 21:14:24,803 [salt.state       :290 ][INFO    ][3059] {'host': 'msg01'}
2018-10-05 21:14:24,803 [salt.state       :1941][INFO    ][3059] Completed state [msg01] at time 21:14:24.803917 duration_in_ms=2.37
2018-10-05 21:14:24,804 [salt.state       :1770][INFO    ][3059] Running state [msg01.mcp-ovs-ha.local] at time 21:14:24.804255
2018-10-05 21:14:24,804 [salt.state       :1803][INFO    ][3059] Executing state host.present for [msg01.mcp-ovs-ha.local]
2018-10-05 21:14:24,805 [salt.state       :290 ][INFO    ][3059] {'host': 'msg01.mcp-ovs-ha.local'}
2018-10-05 21:14:24,805 [salt.state       :1941][INFO    ][3059] Completed state [msg01.mcp-ovs-ha.local] at time 21:14:24.805846 duration_in_ms=1.591
2018-10-05 21:14:24,806 [salt.state       :1770][INFO    ][3059] Running state [msg] at time 21:14:24.806174
2018-10-05 21:14:24,806 [salt.state       :1803][INFO    ][3059] Executing state host.present for [msg]
2018-10-05 21:14:24,807 [salt.state       :290 ][INFO    ][3059] {'host': 'msg'}
2018-10-05 21:14:24,807 [salt.state       :1941][INFO    ][3059] Completed state [msg] at time 21:14:24.807695 duration_in_ms=1.521
2018-10-05 21:14:24,808 [salt.state       :1770][INFO    ][3059] Running state [msg.mcp-ovs-ha.local] at time 21:14:24.808031
2018-10-05 21:14:24,808 [salt.state       :1803][INFO    ][3059] Executing state host.present for [msg.mcp-ovs-ha.local]
2018-10-05 21:14:24,809 [salt.state       :290 ][INFO    ][3059] {'host': 'msg.mcp-ovs-ha.local'}
2018-10-05 21:14:24,809 [salt.state       :1941][INFO    ][3059] Completed state [msg.mcp-ovs-ha.local] at time 21:14:24.809628 duration_in_ms=1.597
2018-10-05 21:14:24,809 [salt.state       :1770][INFO    ][3059] Running state [cfg01] at time 21:14:24.809958
2018-10-05 21:14:24,810 [salt.state       :1803][INFO    ][3059] Executing state host.present for [cfg01]
2018-10-05 21:14:24,810 [salt.state       :290 ][INFO    ][3059] Host cfg01 (192.168.10.11) already present
2018-10-05 21:14:24,811 [salt.state       :1941][INFO    ][3059] Completed state [cfg01] at time 21:14:24.811144 duration_in_ms=1.185
2018-10-05 21:14:24,811 [salt.state       :1770][INFO    ][3059] Running state [cfg01.mcp-ovs-ha.local] at time 21:14:24.811468
2018-10-05 21:14:24,811 [salt.state       :1803][INFO    ][3059] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-05 21:14:24,812 [salt.state       :290 ][INFO    ][3059] Host cfg01.mcp-ovs-ha.local (192.168.10.11) already present
2018-10-05 21:14:24,812 [salt.state       :1941][INFO    ][3059] Completed state [cfg01.mcp-ovs-ha.local] at time 21:14:24.812352 duration_in_ms=0.884
2018-10-05 21:14:24,813 [salt.state       :1770][INFO    ][3059] Running state [cmp002] at time 21:14:24.813858
2018-10-05 21:14:24,814 [salt.state       :1803][INFO    ][3059] Executing state host.present for [cmp002]
2018-10-05 21:14:24,819 [salt.state       :290 ][INFO    ][3059] {'host': 'cmp002'}
2018-10-05 21:14:24,820 [salt.state       :1941][INFO    ][3059] Completed state [cmp002] at time 21:14:24.820084 duration_in_ms=6.226
2018-10-05 21:14:24,820 [salt.state       :1770][INFO    ][3059] Running state [cmp002.mcp-ovs-ha.local] at time 21:14:24.820430
2018-10-05 21:14:24,820 [salt.state       :1803][INFO    ][3059] Executing state host.present for [cmp002.mcp-ovs-ha.local]
2018-10-05 21:14:24,844 [salt.state       :290 ][INFO    ][3059] {'host': 'cmp002.mcp-ovs-ha.local'}
2018-10-05 21:14:24,844 [salt.state       :1941][INFO    ][3059] Completed state [cmp002.mcp-ovs-ha.local] at time 21:14:24.844884 duration_in_ms=24.454
2018-10-05 21:14:24,845 [salt.state       :1770][INFO    ][3059] Running state [cmp001] at time 21:14:24.845341
2018-10-05 21:14:24,845 [salt.state       :1803][INFO    ][3059] Executing state host.present for [cmp001]
2018-10-05 21:14:24,847 [salt.state       :290 ][INFO    ][3059] {'host': 'cmp001'}
2018-10-05 21:14:24,847 [salt.state       :1941][INFO    ][3059] Completed state [cmp001] at time 21:14:24.847361 duration_in_ms=2.02
2018-10-05 21:14:24,848 [salt.state       :1770][INFO    ][3059] Running state [cmp001.mcp-ovs-ha.local] at time 21:14:24.847990
2018-10-05 21:14:24,848 [salt.state       :1803][INFO    ][3059] Executing state host.present for [cmp001.mcp-ovs-ha.local]
2018-10-05 21:14:24,850 [salt.state       :290 ][INFO    ][3059] {'host': 'cmp001.mcp-ovs-ha.local'}
2018-10-05 21:14:24,850 [salt.state       :1941][INFO    ][3059] Completed state [cmp001.mcp-ovs-ha.local] at time 21:14:24.850489 duration_in_ms=2.499
2018-10-05 21:14:24,850 [salt.state       :1770][INFO    ][3059] Running state [dbs01] at time 21:14:24.850831
2018-10-05 21:14:24,851 [salt.state       :1803][INFO    ][3059] Executing state host.present for [dbs01]
2018-10-05 21:14:24,852 [salt.state       :290 ][INFO    ][3059] {'host': 'dbs01'}
2018-10-05 21:14:24,853 [salt.state       :1941][INFO    ][3059] Completed state [dbs01] at time 21:14:24.853568 duration_in_ms=2.737
2018-10-05 21:14:24,853 [salt.state       :1770][INFO    ][3059] Running state [dbs01.mcp-ovs-ha.local] at time 21:14:24.853920
2018-10-05 21:14:24,854 [salt.state       :1803][INFO    ][3059] Executing state host.present for [dbs01.mcp-ovs-ha.local]
2018-10-05 21:14:24,855 [salt.state       :290 ][INFO    ][3059] {'host': 'dbs01.mcp-ovs-ha.local'}
2018-10-05 21:14:24,856 [salt.state       :1941][INFO    ][3059] Completed state [dbs01.mcp-ovs-ha.local] at time 21:14:24.856081 duration_in_ms=2.161
2018-10-05 21:14:24,856 [salt.state       :1770][INFO    ][3059] Running state [dbs02] at time 21:14:24.856422
2018-10-05 21:14:24,856 [salt.state       :1803][INFO    ][3059] Executing state host.present for [dbs02]
2018-10-05 21:14:24,858 [salt.state       :290 ][INFO    ][3059] {'host': 'dbs02'}
2018-10-05 21:14:24,858 [salt.state       :1941][INFO    ][3059] Completed state [dbs02] at time 21:14:24.858932 duration_in_ms=2.509
2018-10-05 21:14:24,859 [salt.state       :1770][INFO    ][3059] Running state [dbs02.mcp-ovs-ha.local] at time 21:14:24.859556
2018-10-05 21:14:24,859 [salt.state       :1803][INFO    ][3059] Executing state host.present for [dbs02.mcp-ovs-ha.local]
2018-10-05 21:14:24,861 [salt.state       :290 ][INFO    ][3059] {'host': 'dbs02.mcp-ovs-ha.local'}
2018-10-05 21:14:24,861 [salt.state       :1941][INFO    ][3059] Completed state [dbs02.mcp-ovs-ha.local] at time 21:14:24.861192 duration_in_ms=1.636
2018-10-05 21:14:24,861 [salt.state       :1770][INFO    ][3059] Running state [dbs03] at time 21:14:24.861853
2018-10-05 21:14:24,862 [salt.state       :1803][INFO    ][3059] Executing state host.present for [dbs03]
2018-10-05 21:14:24,863 [salt.state       :290 ][INFO    ][3059] {'host': 'dbs03'}
2018-10-05 21:14:24,863 [salt.state       :1941][INFO    ][3059] Completed state [dbs03] at time 21:14:24.863433 duration_in_ms=1.58
2018-10-05 21:14:24,863 [salt.state       :1770][INFO    ][3059] Running state [dbs03.mcp-ovs-ha.local] at time 21:14:24.863778
2018-10-05 21:14:24,864 [salt.state       :1803][INFO    ][3059] Executing state host.present for [dbs03.mcp-ovs-ha.local]
2018-10-05 21:14:24,866 [salt.state       :290 ][INFO    ][3059] {'host': 'dbs03.mcp-ovs-ha.local'}
2018-10-05 21:14:24,866 [salt.state       :1941][INFO    ][3059] Completed state [dbs03.mcp-ovs-ha.local] at time 21:14:24.866209 duration_in_ms=2.431
2018-10-05 21:14:24,866 [salt.state       :1770][INFO    ][3059] Running state [mas01] at time 21:14:24.866560
2018-10-05 21:14:24,866 [salt.state       :1803][INFO    ][3059] Executing state host.present for [mas01]
2018-10-05 21:14:24,868 [salt.state       :290 ][INFO    ][3059] {'host': 'mas01'}
2018-10-05 21:14:24,868 [salt.state       :1941][INFO    ][3059] Completed state [mas01] at time 21:14:24.868759 duration_in_ms=2.199
2018-10-05 21:14:24,869 [salt.state       :1770][INFO    ][3059] Running state [mas01.mcp-ovs-ha.local] at time 21:14:24.869108
2018-10-05 21:14:24,869 [salt.state       :1803][INFO    ][3059] Executing state host.present for [mas01.mcp-ovs-ha.local]
2018-10-05 21:14:24,870 [salt.state       :290 ][INFO    ][3059] {'host': 'mas01.mcp-ovs-ha.local'}
2018-10-05 21:14:24,871 [salt.state       :1941][INFO    ][3059] Completed state [mas01.mcp-ovs-ha.local] at time 21:14:24.871033 duration_in_ms=1.925
2018-10-05 21:14:24,871 [salt.state       :1770][INFO    ][3059] Running state [ctl02] at time 21:14:24.871663
2018-10-05 21:14:24,871 [salt.state       :1803][INFO    ][3059] Executing state host.present for [ctl02]
2018-10-05 21:14:24,873 [salt.state       :290 ][INFO    ][3059] {'host': 'ctl02'}
2018-10-05 21:14:24,874 [salt.state       :1941][INFO    ][3059] Completed state [ctl02] at time 21:14:24.874167 duration_in_ms=2.504
2018-10-05 21:14:24,874 [salt.state       :1770][INFO    ][3059] Running state [ctl02.mcp-ovs-ha.local] at time 21:14:24.874523
2018-10-05 21:14:24,874 [salt.state       :1803][INFO    ][3059] Executing state host.present for [ctl02.mcp-ovs-ha.local]
2018-10-05 21:14:24,875 [salt.state       :290 ][INFO    ][3059] {'host': 'ctl02.mcp-ovs-ha.local'}
2018-10-05 21:14:24,876 [salt.state       :1941][INFO    ][3059] Completed state [ctl02.mcp-ovs-ha.local] at time 21:14:24.876436 duration_in_ms=1.912
2018-10-05 21:14:24,876 [salt.state       :1770][INFO    ][3059] Running state [ctl03] at time 21:14:24.876805
2018-10-05 21:14:24,877 [salt.state       :1803][INFO    ][3059] Executing state host.present for [ctl03]
2018-10-05 21:14:24,878 [salt.state       :290 ][INFO    ][3059] {'host': 'ctl03'}
2018-10-05 21:14:24,879 [salt.state       :1941][INFO    ][3059] Completed state [ctl03] at time 21:14:24.879039 duration_in_ms=2.234
2018-10-05 21:14:24,879 [salt.state       :1770][INFO    ][3059] Running state [ctl03.mcp-ovs-ha.local] at time 21:14:24.879387
2018-10-05 21:14:24,879 [salt.state       :1803][INFO    ][3059] Executing state host.present for [ctl03.mcp-ovs-ha.local]
2018-10-05 21:14:24,882 [salt.state       :290 ][INFO    ][3059] {'host': 'ctl03.mcp-ovs-ha.local'}
2018-10-05 21:14:24,882 [salt.state       :1941][INFO    ][3059] Completed state [ctl03.mcp-ovs-ha.local] at time 21:14:24.882470 duration_in_ms=3.083
2018-10-05 21:14:24,882 [salt.state       :1770][INFO    ][3059] Running state [ctl01] at time 21:14:24.882821
2018-10-05 21:14:24,883 [salt.state       :1803][INFO    ][3059] Executing state host.present for [ctl01]
2018-10-05 21:14:24,884 [salt.state       :290 ][INFO    ][3059] {'host': 'ctl01'}
2018-10-05 21:14:24,884 [salt.state       :1941][INFO    ][3059] Completed state [ctl01] at time 21:14:24.884473 duration_in_ms=1.651
2018-10-05 21:14:24,885 [salt.state       :1770][INFO    ][3059] Running state [ctl01.mcp-ovs-ha.local] at time 21:14:24.885119
2018-10-05 21:14:24,885 [salt.state       :1803][INFO    ][3059] Executing state host.present for [ctl01.mcp-ovs-ha.local]
2018-10-05 21:14:24,887 [salt.state       :290 ][INFO    ][3059] {'host': 'ctl01.mcp-ovs-ha.local'}
2018-10-05 21:14:24,887 [salt.state       :1941][INFO    ][3059] Completed state [ctl01.mcp-ovs-ha.local] at time 21:14:24.887496 duration_in_ms=2.377
2018-10-05 21:14:24,888 [salt.state       :1770][INFO    ][3059] Running state [ctl] at time 21:14:24.887848
2018-10-05 21:14:24,888 [salt.state       :1803][INFO    ][3059] Executing state host.present for [ctl]
2018-10-05 21:14:24,890 [salt.state       :290 ][INFO    ][3059] {'host': 'ctl'}
2018-10-05 21:14:24,890 [salt.state       :1941][INFO    ][3059] Completed state [ctl] at time 21:14:24.890681 duration_in_ms=2.833
2018-10-05 21:14:24,891 [salt.state       :1770][INFO    ][3059] Running state [ctl.mcp-ovs-ha.local] at time 21:14:24.891035
2018-10-05 21:14:24,891 [salt.state       :1803][INFO    ][3059] Executing state host.present for [ctl.mcp-ovs-ha.local]
2018-10-05 21:14:24,893 [salt.state       :290 ][INFO    ][3059] {'host': 'ctl.mcp-ovs-ha.local'}
2018-10-05 21:14:24,894 [salt.state       :1941][INFO    ][3059] Completed state [ctl.mcp-ovs-ha.local] at time 21:14:24.894174 duration_in_ms=3.139
2018-10-05 21:14:24,894 [salt.state       :1770][INFO    ][3059] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 21:14:24.894437
2018-10-05 21:14:24,894 [salt.state       :1803][INFO    ][3059] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-10-05 21:14:24,895 [salt.state       :290 ][INFO    ][3059] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-10-05 21:14:24,895 [salt.state       :1941][INFO    ][3059] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 21:14:24.895600 duration_in_ms=1.163
2018-10-05 21:14:24,897 [salt.state       :1770][INFO    ][3059] Running state [ens3] at time 21:14:24.897568
2018-10-05 21:14:24,897 [salt.state       :1803][INFO    ][3059] Executing state network.managed for [ens3]
2018-10-05 21:14:25,077 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['ifup', 'ens3'] in directory '/root'
2018-10-05 21:14:26,125 [salt.state       :290 ][INFO    ][3059] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-10-05 21:14:26,125 [salt.state       :1941][INFO    ][3059] Completed state [ens3] at time 21:14:26.125890 duration_in_ms=1228.321
2018-10-05 21:14:26,126 [salt.state       :1770][INFO    ][3059] Running state [ens2] at time 21:14:26.126243
2018-10-05 21:14:26,126 [salt.state       :1803][INFO    ][3059] Executing state network.managed for [ens2]
2018-10-05 21:14:26,174 [salt.state       :290 ][INFO    ][3059] {'interface': 'Added network interface.'}
2018-10-05 21:14:26,175 [salt.state       :1941][INFO    ][3059] Completed state [ens2] at time 21:14:26.175371 duration_in_ms=49.128
2018-10-05 21:14:26,175 [salt.state       :1770][INFO    ][3059] Running state [linux_system_network] at time 21:14:26.175811
2018-10-05 21:14:26,176 [salt.state       :1803][INFO    ][3059] Executing state network.system for [linux_system_network]
2018-10-05 21:14:26,177 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-10-05 21:14:26,204 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-10-05 21:14:26,235 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-10-05 21:14:26,266 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-10-05 21:14:26,812 [salt.loaded.int.module.debian_ip:1970][WARNING ][3059] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-10-05 21:14:26,812 [salt.state       :290 ][INFO    ][3059] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb01\n\n+DOMAIN=mcp-ovs-ha.local\n\n+SEARCH=maas\n'}
2018-10-05 21:14:26,817 [salt.state       :1941][INFO    ][3059] Completed state [linux_system_network] at time 21:14:26.817197 duration_in_ms=641.387
2018-10-05 21:14:26,817 [salt.state       :1770][INFO    ][3059] Running state [/etc/profile.d/proxy.sh] at time 21:14:26.817652
2018-10-05 21:14:26,818 [salt.state       :1803][INFO    ][3059] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-10-05 21:14:26,818 [salt.state       :290 ][INFO    ][3059] File /etc/profile.d/proxy.sh is not present
2018-10-05 21:14:26,818 [salt.state       :1941][INFO    ][3059] Completed state [/etc/profile.d/proxy.sh] at time 21:14:26.818857 duration_in_ms=1.205
2018-10-05 21:14:26,819 [salt.state       :1770][INFO    ][3059] Running state [/etc/apt/apt.conf.d/95proxies] at time 21:14:26.819121
2018-10-05 21:14:26,819 [salt.state       :1803][INFO    ][3059] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-10-05 21:14:26,819 [salt.state       :290 ][INFO    ][3059] File /etc/apt/apt.conf.d/95proxies is not present
2018-10-05 21:14:26,819 [salt.state       :1941][INFO    ][3059] Completed state [/etc/apt/apt.conf.d/95proxies] at time 21:14:26.819913 duration_in_ms=0.791
2018-10-05 21:14:26,823 [salt.state       :1770][INFO    ][3059] Running state [ntp] at time 21:14:26.823755
2018-10-05 21:14:26,824 [salt.state       :1803][INFO    ][3059] Executing state pkg.installed for [ntp]
2018-10-05 21:14:27,140 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 21:14:27,175 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-10-05 21:14:30,721 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005211430708072
2018-10-05 21:14:30,749 [salt.minion      :1431][INFO    ][6319] Starting a new job with PID 6319
2018-10-05 21:14:30,771 [salt.minion      :1708][INFO    ][6319] Returning information for job: 20181005211430708072
2018-10-05 21:14:32,222 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:14:32,269 [salt.state       :290 ][INFO    ][3059] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-10-05 21:14:32,291 [salt.state       :905 ][INFO    ][3059] Loading fresh modules for state activity
2018-10-05 21:14:32,339 [salt.state       :1941][INFO    ][3059] Completed state [ntp] at time 21:14:32.339013 duration_in_ms=5515.258
2018-10-05 21:14:32,346 [salt.state       :1770][INFO    ][3059] Running state [/etc/ntp.conf] at time 21:14:32.346091
2018-10-05 21:14:32,346 [salt.state       :1803][INFO    ][3059] Executing state file.managed for [/etc/ntp.conf]
2018-10-05 21:14:32,386 [salt.fileclient  :1215][INFO    ][3059] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-10-05 21:14:32,474 [salt.state       :290 ][INFO    ][3059] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-10-05 21:14:32,482 [salt.state       :1941][INFO    ][3059] Completed state [/etc/ntp.conf] at time 21:14:32.482086 duration_in_ms=135.994
2018-10-05 21:14:33,077 [salt.state       :1770][INFO    ][3059] Running state [ntp] at time 21:14:33.076975
2018-10-05 21:14:33,077 [salt.state       :1803][INFO    ][3059] Executing state service.running for [ntp]
2018-10-05 21:14:33,079 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-10-05 21:14:33,103 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-05 21:14:33,125 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-10-05 21:14:33,149 [salt.state       :290 ][INFO    ][3059] The service ntp is already running
2018-10-05 21:14:33,150 [salt.state       :1941][INFO    ][3059] Completed state [ntp] at time 21:14:33.149929 duration_in_ms=72.955
2018-10-05 21:14:33,150 [salt.state       :1770][INFO    ][3059] Running state [ntp] at time 21:14:33.150261
2018-10-05 21:14:33,150 [salt.state       :1803][INFO    ][3059] Executing state service.mod_watch for [ntp]
2018-10-05 21:14:33,152 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-05 21:14:33,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3059] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-10-05 21:14:33,280 [salt.state       :290 ][INFO    ][3059] {'ntp': True}
2018-10-05 21:14:33,281 [salt.state       :1941][INFO    ][3059] Completed state [ntp] at time 21:14:33.281409 duration_in_ms=131.147
2018-10-05 21:14:33,291 [salt.minion      :1708][INFO    ][3059] Returning information for job: 20181005211343565047
2018-10-05 21:14:37,988 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181005211437973594
2018-10-05 21:14:38,014 [salt.minion      :1431][INFO    ][6454] Starting a new job with PID 6454
2018-10-05 21:14:38,039 [salt.minion      :1708][INFO    ][6454] Returning information for job: 20181005211437973594
2018-10-05 21:14:55,537 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command pkg.upgrade with jid 20181005211455525012
2018-10-05 21:14:55,571 [salt.minion      :1431][INFO    ][6482] Starting a new job with PID 6482
2018-10-05 21:14:55,600 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6482] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:14:56,073 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6482] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-10-05 21:15:00,651 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005211500633399
2018-10-05 21:15:00,674 [salt.minion      :1431][INFO    ][6632] Starting a new job with PID 6632
2018-10-05 21:15:00,703 [salt.minion      :1708][INFO    ][6632] Returning information for job: 20181005211500633399
2018-10-05 21:15:10,875 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005211510861354
2018-10-05 21:15:10,898 [salt.minion      :1431][INFO    ][6863] Starting a new job with PID 6863
2018-10-05 21:15:10,982 [salt.minion      :1708][INFO    ][6863] Returning information for job: 20181005211510861354
2018-10-05 21:15:21,036 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005211521018481
2018-10-05 21:15:21,058 [salt.minion      :1431][INFO    ][7558] Starting a new job with PID 7558
2018-10-05 21:15:21,085 [salt.minion      :1708][INFO    ][7558] Returning information for job: 20181005211521018481
2018-10-05 21:15:26,025 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6482] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:15:26,076 [salt.minion      :1708][INFO    ][6482] Returning information for job: 20181005211455525012
2018-10-05 21:15:40,862 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command test.ping with jid 20181005211540852859
2018-10-05 21:15:40,897 [salt.minion      :1431][INFO    ][7710] Starting a new job with PID 7710
2018-10-05 21:15:40,931 [salt.minion      :1708][INFO    ][7710] Returning information for job: 20181005211540852859
2018-10-05 21:18:40,949 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005211840932421
2018-10-05 21:18:40,969 [salt.minion      :1431][INFO    ][7828] Starting a new job with PID 7828
2018-10-05 21:18:41,957 [salt.state       :905 ][INFO    ][7828] Loading fresh modules for state activity
2018-10-05 21:18:42,021 [salt.fileclient  :1215][INFO    ][7828] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-10-05 21:18:42,062 [salt.fileclient  :1215][INFO    ][7828] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-10-05 21:18:42,874 [salt.state       :1770][INFO    ][7828] Running state [keepalived] at time 21:18:42.874238
2018-10-05 21:18:42,875 [salt.state       :1803][INFO    ][7828] Executing state pkg.installed for [keepalived]
2018-10-05 21:18:42,876 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:18:43,363 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-10-05 21:18:43,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-05 21:18:45,598 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 21:18:45,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-10-05 21:18:46,057 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005211846045398
2018-10-05 21:18:46,083 [salt.minion      :1431][INFO    ][8203] Starting a new job with PID 8203
2018-10-05 21:18:46,104 [salt.minion      :1708][INFO    ][8203] Returning information for job: 20181005211846045398
2018-10-05 21:18:50,295 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:18:50,345 [salt.state       :290 ][INFO    ][7828] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-10-05 21:18:50,369 [salt.state       :905 ][INFO    ][7828] Loading fresh modules for state activity
2018-10-05 21:18:50,418 [salt.state       :1941][INFO    ][7828] Completed state [keepalived] at time 21:18:50.417930 duration_in_ms=7543.693
2018-10-05 21:18:50,425 [salt.state       :1770][INFO    ][7828] Running state [lsof] at time 21:18:50.425515
2018-10-05 21:18:50,426 [salt.state       :1803][INFO    ][7828] Executing state pkg.installed for [lsof]
2018-10-05 21:18:51,175 [salt.state       :290 ][INFO    ][7828] All specified packages are already installed
2018-10-05 21:18:51,176 [salt.state       :1941][INFO    ][7828] Completed state [lsof] at time 21:18:51.176666 duration_in_ms=751.15
2018-10-05 21:18:51,180 [salt.state       :1770][INFO    ][7828] Running state [/etc/keepalived/keepalived.conf] at time 21:18:51.180266
2018-10-05 21:18:51,180 [salt.state       :1803][INFO    ][7828] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-05 21:18:51,213 [salt.fileclient  :1215][INFO    ][7828] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-10-05 21:18:51,275 [salt.state       :290 ][INFO    ][7828] File changed:
New file
2018-10-05 21:18:51,276 [salt.state       :1941][INFO    ][7828] Completed state [/etc/keepalived/keepalived.conf] at time 21:18:51.276089 duration_in_ms=95.823
2018-10-05 21:18:51,277 [salt.state       :1770][INFO    ][7828] Running state [keepalived] at time 21:18:51.277555
2018-10-05 21:18:51,278 [salt.state       :1803][INFO    ][7828] Executing state service.running for [keepalived]
2018-10-05 21:18:51,279 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-05 21:18:51,304 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-05 21:18:51,324 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-05 21:18:51,344 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-10-05 21:18:51,412 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-05 21:18:51,431 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-05 21:18:51,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7828] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-05 21:18:51,471 [salt.state       :290 ][INFO    ][7828] {'keepalived': True}
2018-10-05 21:18:51,471 [salt.state       :1941][INFO    ][7828] Completed state [keepalived] at time 21:18:51.471872 duration_in_ms=194.317
2018-10-05 21:18:51,473 [salt.minion      :1708][INFO    ][7828] Returning information for job: 20181005211840932421
2018-10-05 21:19:43,220 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command pillar.get with jid 20181005211943209260
2018-10-05 21:19:43,256 [salt.minion      :1431][INFO    ][9191] Starting a new job with PID 9191
2018-10-05 21:19:43,265 [salt.minion      :1708][INFO    ][9191] Returning information for job: 20181005211943209260
2018-10-05 21:32:14,622 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005213214612745
2018-10-05 21:32:14,651 [salt.minion      :1431][INFO    ][9247] Starting a new job with PID 9247
2018-10-05 21:32:20,859 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005213220845694
2018-10-05 21:32:20,883 [salt.minion      :1431][INFO    ][9254] Starting a new job with PID 9254
2018-10-05 21:32:20,909 [salt.minion      :1708][INFO    ][9254] Returning information for job: 20181005213220845694
2018-10-05 21:32:21,453 [salt.state       :905 ][INFO    ][9247] Loading fresh modules for state activity
2018-10-05 21:32:23,138 [salt.fileclient  :1215][INFO    ][9247] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-10-05 21:32:23,176 [salt.fileclient  :1215][INFO    ][9247] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-10-05 21:32:23,218 [salt.fileclient  :1215][INFO    ][9247] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-10-05 21:32:24,064 [salt.state       :1770][INFO    ][9247] Running state [memcached] at time 21:32:24.064606
2018-10-05 21:32:24,065 [salt.state       :1803][INFO    ][9247] Executing state pkg.installed for [memcached]
2018-10-05 21:32:24,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:32:24,556 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-10-05 21:32:24,713 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-05 21:32:26,915 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 21:32:26,949 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-10-05 21:32:30,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:32:30,789 [salt.state       :290 ][INFO    ][9247] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-10-05 21:32:30,815 [salt.state       :905 ][INFO    ][9247] Loading fresh modules for state activity
2018-10-05 21:32:30,871 [salt.state       :1941][INFO    ][9247] Completed state [memcached] at time 21:32:30.871578 duration_in_ms=6806.973
2018-10-05 21:32:30,880 [salt.state       :1770][INFO    ][9247] Running state [python-memcache] at time 21:32:30.879836
2018-10-05 21:32:30,880 [salt.state       :1803][INFO    ][9247] Executing state pkg.installed for [python-memcache]
2018-10-05 21:32:31,584 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005213231046121
2018-10-05 21:32:31,609 [salt.minion      :1431][INFO    ][10064] Starting a new job with PID 10064
2018-10-05 21:32:31,629 [salt.minion      :1708][INFO    ][10064] Returning information for job: 20181005213231046121
2018-10-05 21:32:31,781 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 21:32:31,812 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-10-05 21:32:33,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:32:33,945 [salt.state       :290 ][INFO    ][9247] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-10-05 21:32:33,966 [salt.state       :905 ][INFO    ][9247] Loading fresh modules for state activity
2018-10-05 21:32:34,012 [salt.state       :1941][INFO    ][9247] Completed state [python-memcache] at time 21:32:34.012161 duration_in_ms=3132.324
2018-10-05 21:32:34,017 [salt.state       :1770][INFO    ][9247] Running state [/etc/memcached.conf] at time 21:32:34.017865
2018-10-05 21:32:34,018 [salt.state       :1803][INFO    ][9247] Executing state file.managed for [/etc/memcached.conf]
2018-10-05 21:32:34,063 [salt.fileclient  :1215][INFO    ][9247] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-10-05 21:32:34,101 [salt.state       :290 ][INFO    ][9247] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-10-05 21:32:34,102 [salt.state       :1941][INFO    ][9247] Completed state [/etc/memcached.conf] at time 21:32:34.102506 duration_in_ms=84.641
2018-10-05 21:32:34,665 [salt.state       :1770][INFO    ][9247] Running state [memcached] at time 21:32:34.665411
2018-10-05 21:32:34,665 [salt.state       :1803][INFO    ][9247] Executing state service.running for [memcached]
2018-10-05 21:32:34,667 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-05 21:32:34,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-05 21:32:34,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-05 21:32:34,724 [salt.state       :290 ][INFO    ][9247] The service memcached is already running
2018-10-05 21:32:34,725 [salt.state       :1941][INFO    ][9247] Completed state [memcached] at time 21:32:34.725158 duration_in_ms=59.747
2018-10-05 21:32:34,725 [salt.state       :1770][INFO    ][9247] Running state [memcached] at time 21:32:34.725512
2018-10-05 21:32:34,725 [salt.state       :1803][INFO    ][9247] Executing state service.mod_watch for [memcached]
2018-10-05 21:32:34,726 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-05 21:32:34,749 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9247] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-10-05 21:32:34,778 [salt.state       :290 ][INFO    ][9247] {'memcached': True}
2018-10-05 21:32:34,779 [salt.state       :1941][INFO    ][9247] Completed state [memcached] at time 21:32:34.779107 duration_in_ms=53.594
2018-10-05 21:32:34,784 [salt.minion      :1708][INFO    ][9247] Returning information for job: 20181005213214612745
2018-10-05 21:32:38,025 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005213238013086
2018-10-05 21:32:38,060 [salt.minion      :1431][INFO    ][10243] Starting a new job with PID 10243
2018-10-05 21:32:44,341 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005213244330706
2018-10-05 21:32:44,359 [salt.minion      :1431][INFO    ][10248] Starting a new job with PID 10248
2018-10-05 21:32:44,387 [salt.minion      :1708][INFO    ][10248] Returning information for job: 20181005213244330706
2018-10-05 21:32:47,210 [salt.state       :905 ][INFO    ][10243] Loading fresh modules for state activity
2018-10-05 21:32:47,283 [salt.fileclient  :1215][INFO    ][10243] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-10-05 21:32:47,315 [salt.fileclient  :1215][INFO    ][10243] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-10-05 21:32:48,152 [salt.state       :1770][INFO    ][10243] Running state [haproxy] at time 21:32:48.152497
2018-10-05 21:32:48,153 [salt.state       :1803][INFO    ][10243] Executing state pkg.installed for [haproxy]
2018-10-05 21:32:48,154 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:32:48,722 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-10-05 21:32:48,904 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-05 21:32:51,295 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 21:32:51,327 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-10-05 21:32:54,408 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005213254388253
2018-10-05 21:32:54,437 [salt.minion      :1431][INFO    ][11015] Starting a new job with PID 11015
2018-10-05 21:32:54,459 [salt.minion      :1708][INFO    ][11015] Returning information for job: 20181005213254388253
2018-10-05 21:32:55,748 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:32:55,802 [salt.state       :290 ][INFO    ][10243] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-10-05 21:32:55,832 [salt.state       :905 ][INFO    ][10243] Loading fresh modules for state activity
2018-10-05 21:32:55,883 [salt.state       :1941][INFO    ][10243] Completed state [haproxy] at time 21:32:55.883480 duration_in_ms=7730.984
2018-10-05 21:32:55,888 [salt.state       :1770][INFO    ][10243] Running state [/etc/default/haproxy] at time 21:32:55.888584
2018-10-05 21:32:55,888 [salt.state       :1803][INFO    ][10243] Executing state file.managed for [/etc/default/haproxy]
2018-10-05 21:32:55,931 [salt.fileclient  :1215][INFO    ][10243] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-10-05 21:32:55,934 [salt.state       :290 ][INFO    ][10243] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-10-05 21:32:55,934 [salt.state       :1941][INFO    ][10243] Completed state [/etc/default/haproxy] at time 21:32:55.934728 duration_in_ms=46.144
2018-10-05 21:32:55,935 [salt.state       :1770][INFO    ][10243] Running state [/etc/haproxy/haproxy.cfg] at time 21:32:55.935073
2018-10-05 21:32:55,935 [salt.state       :1803][INFO    ][10243] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-05 21:32:55,954 [salt.fileclient  :1215][INFO    ][10243] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-10-05 21:32:56,182 [salt.state       :290 ][INFO    ][10243] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-10-05 21:32:56,183 [salt.state       :1941][INFO    ][10243] Completed state [/etc/haproxy/haproxy.cfg] at time 21:32:56.183114 duration_in_ms=248.04
2018-10-05 21:32:56,183 [salt.state       :1770][INFO    ][10243] Running state [/etc/haproxy/ssl] at time 21:32:56.183483
2018-10-05 21:32:56,183 [salt.state       :1803][INFO    ][10243] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-05 21:32:56,186 [salt.state       :290 ][INFO    ][10243] {'/etc/haproxy/ssl': 'New Dir'}
2018-10-05 21:32:56,187 [salt.state       :1941][INFO    ][10243] Completed state [/etc/haproxy/ssl] at time 21:32:56.187112 duration_in_ms=3.628
2018-10-05 21:32:56,187 [salt.state       :1770][INFO    ][10243] Running state [/etc/haproxy/errors/429.http11] at time 21:32:56.187443
2018-10-05 21:32:56,187 [salt.state       :1803][INFO    ][10243] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-05 21:32:56,217 [salt.fileclient  :1215][INFO    ][10243] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-10-05 21:32:56,233 [salt.state       :290 ][INFO    ][10243] File changed:
New file
2018-10-05 21:32:56,234 [salt.state       :1941][INFO    ][10243] Completed state [/etc/haproxy/errors/429.http11] at time 21:32:56.233914 duration_in_ms=46.469
2018-10-05 21:32:56,235 [salt.state       :1770][INFO    ][10243] Running state [haproxy_status_packages] at time 21:32:56.235530
2018-10-05 21:32:56,235 [salt.state       :1803][INFO    ][10243] Executing state pkg.installed for [haproxy_status_packages]
2018-10-05 21:32:57,076 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 21:32:57,103 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-10-05 21:32:59,409 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:32:59,458 [salt.state       :290 ][INFO    ][10243] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-10-05 21:32:59,481 [salt.state       :905 ][INFO    ][10243] Loading fresh modules for state activity
2018-10-05 21:32:59,526 [salt.state       :1941][INFO    ][10243] Completed state [haproxy_status_packages] at time 21:32:59.525951 duration_in_ms=3290.421
2018-10-05 21:32:59,530 [salt.state       :1770][INFO    ][10243] Running state [/usr/bin/haproxy-status.sh] at time 21:32:59.530864
2018-10-05 21:32:59,531 [salt.state       :1803][INFO    ][10243] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-05 21:32:59,558 [salt.fileclient  :1215][INFO    ][10243] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-10-05 21:32:59,591 [salt.state       :290 ][INFO    ][10243] File changed:
New file
2018-10-05 21:32:59,591 [salt.state       :1941][INFO    ][10243] Completed state [/usr/bin/haproxy-status.sh] at time 21:32:59.591634 duration_in_ms=60.77
2018-10-05 21:32:59,595 [salt.state       :1770][INFO    ][10243] Running state [net.ipv4.ip_nonlocal_bind] at time 21:32:59.594967
2018-10-05 21:32:59,595 [salt.state       :1803][INFO    ][10243] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-05 21:32:59,599 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-10-05 21:32:59,614 [salt.state       :290 ][INFO    ][10243] {'net.ipv4.ip_nonlocal_bind': 1}
2018-10-05 21:32:59,615 [salt.state       :1941][INFO    ][10243] Completed state [net.ipv4.ip_nonlocal_bind] at time 21:32:59.614936 duration_in_ms=19.969
2018-10-05 21:33:00,166 [salt.state       :1770][INFO    ][10243] Running state [haproxy] at time 21:33:00.166223
2018-10-05 21:33:00,167 [salt.state       :1803][INFO    ][10243] Executing state service.running for [haproxy]
2018-10-05 21:33:00,168 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-05 21:33:00,189 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-05 21:33:00,211 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-05 21:33:00,230 [salt.state       :290 ][INFO    ][10243] The service haproxy is already running
2018-10-05 21:33:00,231 [salt.state       :1941][INFO    ][10243] Completed state [haproxy] at time 21:33:00.231367 duration_in_ms=65.143
2018-10-05 21:33:00,232 [salt.state       :1770][INFO    ][10243] Running state [haproxy] at time 21:33:00.232270
2018-10-05 21:33:00,233 [salt.state       :1803][INFO    ][10243] Executing state service.mod_watch for [haproxy]
2018-10-05 21:33:00,235 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-05 21:33:00,259 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10243] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-10-05 21:33:00,300 [salt.state       :290 ][INFO    ][10243] {'haproxy': True}
2018-10-05 21:33:00,301 [salt.state       :1941][INFO    ][10243] Completed state [haproxy] at time 21:33:00.301055 duration_in_ms=68.784
2018-10-05 21:33:00,308 [salt.minion      :1708][INFO    ][10243] Returning information for job: 20181005213238013086
2018-10-05 21:33:01,692 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command service.status with jid 20181005213301680765
2018-10-05 21:33:01,723 [salt.minion      :1431][INFO    ][11420] Starting a new job with PID 11420
2018-10-05 21:33:02,346 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11420] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-05 21:33:02,373 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11420] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-05 21:33:02,396 [salt.minion      :1708][INFO    ][11420] Returning information for job: 20181005213301680765
2018-10-05 21:33:03,420 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command service.restart with jid 20181005213303407479
2018-10-05 21:33:03,449 [salt.minion      :1431][INFO    ][11428] Starting a new job with PID 11428
2018-10-05 21:33:04,026 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11428] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-05 21:33:04,070 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11428] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-05 21:33:04,116 [salt.minion      :1708][INFO    ][11428] Returning information for job: 20181005213303407479
2018-10-05 21:51:36,912 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command test.ping with jid 20181005215136900650
2018-10-05 21:51:36,949 [salt.minion      :1431][INFO    ][11521] Starting a new job with PID 11521
2018-10-05 21:51:36,982 [salt.minion      :1708][INFO    ][11521] Returning information for job: 20181005215136900650
2018-10-05 21:51:56,840 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005215156825459
2018-10-05 21:51:56,871 [salt.minion      :1431][INFO    ][11526] Starting a new job with PID 11526
2018-10-05 21:51:57,862 [salt.state       :905 ][INFO    ][11526] Loading fresh modules for state activity
2018-10-05 21:51:58,862 [salt.state       :1770][INFO    ][11526] Running state [keepalived] at time 21:51:58.861322
2018-10-05 21:51:58,863 [salt.state       :1803][INFO    ][11526] Executing state pkg.installed for [keepalived]
2018-10-05 21:51:58,863 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11526] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:51:59,384 [salt.state       :290 ][INFO    ][11526] All specified packages are already installed
2018-10-05 21:51:59,385 [salt.state       :1941][INFO    ][11526] Completed state [keepalived] at time 21:51:59.384919 duration_in_ms=523.598
2018-10-05 21:51:59,385 [salt.state       :1770][INFO    ][11526] Running state [lsof] at time 21:51:59.385312
2018-10-05 21:51:59,386 [salt.state       :1803][INFO    ][11526] Executing state pkg.installed for [lsof]
2018-10-05 21:51:59,397 [salt.state       :290 ][INFO    ][11526] All specified packages are already installed
2018-10-05 21:51:59,398 [salt.state       :1941][INFO    ][11526] Completed state [lsof] at time 21:51:59.398134 duration_in_ms=12.822
2018-10-05 21:51:59,403 [salt.state       :1770][INFO    ][11526] Running state [/etc/keepalived/keepalived.conf] at time 21:51:59.403350
2018-10-05 21:51:59,403 [salt.state       :1803][INFO    ][11526] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-05 21:51:59,491 [salt.state       :290 ][INFO    ][11526] File /etc/keepalived/keepalived.conf is in the correct state
2018-10-05 21:51:59,491 [salt.state       :1941][INFO    ][11526] Completed state [/etc/keepalived/keepalived.conf] at time 21:51:59.491369 duration_in_ms=88.019
2018-10-05 21:51:59,492 [salt.state       :1770][INFO    ][11526] Running state [keepalived] at time 21:51:59.492513
2018-10-05 21:51:59,492 [salt.state       :1803][INFO    ][11526] Executing state service.running for [keepalived]
2018-10-05 21:51:59,493 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11526] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-05 21:51:59,540 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11526] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-05 21:51:59,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11526] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-05 21:51:59,584 [salt.state       :290 ][INFO    ][11526] The service keepalived is already running
2018-10-05 21:51:59,586 [salt.state       :1941][INFO    ][11526] Completed state [keepalived] at time 21:51:59.586216 duration_in_ms=93.703
2018-10-05 21:51:59,589 [salt.minion      :1708][INFO    ][11526] Returning information for job: 20181005215156825459
2018-10-05 21:52:43,020 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command pillar.get with jid 20181005215243009018
2018-10-05 21:52:43,054 [salt.minion      :1431][INFO    ][11553] Starting a new job with PID 11553
2018-10-05 21:52:43,066 [salt.minion      :1708][INFO    ][11553] Returning information for job: 20181005215243009018
2018-10-05 21:55:20,417 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005215520407532
2018-10-05 21:55:20,440 [salt.minion      :1431][INFO    ][11568] Starting a new job with PID 11568
2018-10-05 21:55:21,458 [salt.state       :905 ][INFO    ][11568] Loading fresh modules for state activity
2018-10-05 21:55:23,673 [salt.state       :1770][INFO    ][11568] Running state [memcached] at time 21:55:23.672974
2018-10-05 21:55:23,673 [salt.state       :1803][INFO    ][11568] Executing state pkg.installed for [memcached]
2018-10-05 21:55:23,674 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11568] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:55:24,185 [salt.state       :290 ][INFO    ][11568] All specified packages are already installed
2018-10-05 21:55:24,186 [salt.state       :1941][INFO    ][11568] Completed state [memcached] at time 21:55:24.185961 duration_in_ms=512.986
2018-10-05 21:55:24,186 [salt.state       :1770][INFO    ][11568] Running state [python-memcache] at time 21:55:24.186343
2018-10-05 21:55:24,186 [salt.state       :1803][INFO    ][11568] Executing state pkg.installed for [python-memcache]
2018-10-05 21:55:24,198 [salt.state       :290 ][INFO    ][11568] All specified packages are already installed
2018-10-05 21:55:24,198 [salt.state       :1941][INFO    ][11568] Completed state [python-memcache] at time 21:55:24.198335 duration_in_ms=11.991
2018-10-05 21:55:24,202 [salt.state       :1770][INFO    ][11568] Running state [/etc/memcached.conf] at time 21:55:24.202867
2018-10-05 21:55:24,203 [salt.state       :1803][INFO    ][11568] Executing state file.managed for [/etc/memcached.conf]
2018-10-05 21:55:24,256 [salt.state       :290 ][INFO    ][11568] File /etc/memcached.conf is in the correct state
2018-10-05 21:55:24,256 [salt.state       :1941][INFO    ][11568] Completed state [/etc/memcached.conf] at time 21:55:24.256467 duration_in_ms=53.6
2018-10-05 21:55:24,257 [salt.state       :1770][INFO    ][11568] Running state [memcached] at time 21:55:24.257454
2018-10-05 21:55:24,258 [salt.state       :1803][INFO    ][11568] Executing state service.running for [memcached]
2018-10-05 21:55:24,259 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11568] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-05 21:55:24,297 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11568] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-05 21:55:24,318 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11568] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-05 21:55:24,339 [salt.state       :290 ][INFO    ][11568] The service memcached is already running
2018-10-05 21:55:24,340 [salt.state       :1941][INFO    ][11568] Completed state [memcached] at time 21:55:24.340570 duration_in_ms=83.115
2018-10-05 21:55:24,344 [salt.minion      :1708][INFO    ][11568] Returning information for job: 20181005215520407532
2018-10-05 21:55:25,939 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005215525927083
2018-10-05 21:55:25,972 [salt.minion      :1431][INFO    ][11594] Starting a new job with PID 11594
2018-10-05 21:55:32,277 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005215532265286
2018-10-05 21:55:32,302 [salt.minion      :1431][INFO    ][11599] Starting a new job with PID 11599
2018-10-05 21:55:32,327 [salt.minion      :1708][INFO    ][11599] Returning information for job: 20181005215532265286
2018-10-05 21:55:34,137 [salt.state       :905 ][INFO    ][11594] Loading fresh modules for state activity
2018-10-05 21:55:35,733 [salt.state       :1770][INFO    ][11594] Running state [haproxy] at time 21:55:35.733862
2018-10-05 21:55:35,734 [salt.state       :1803][INFO    ][11594] Executing state pkg.installed for [haproxy]
2018-10-05 21:55:35,735 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11594] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 21:55:36,252 [salt.state       :290 ][INFO    ][11594] All specified packages are already installed
2018-10-05 21:55:36,252 [salt.state       :1941][INFO    ][11594] Completed state [haproxy] at time 21:55:36.252672 duration_in_ms=518.811
2018-10-05 21:55:36,257 [salt.state       :1770][INFO    ][11594] Running state [/etc/default/haproxy] at time 21:55:36.257343
2018-10-05 21:55:36,257 [salt.state       :1803][INFO    ][11594] Executing state file.managed for [/etc/default/haproxy]
2018-10-05 21:55:36,281 [salt.state       :290 ][INFO    ][11594] File /etc/default/haproxy is in the correct state
2018-10-05 21:55:36,281 [salt.state       :1941][INFO    ][11594] Completed state [/etc/default/haproxy] at time 21:55:36.281565 duration_in_ms=24.223
2018-10-05 21:55:36,282 [salt.state       :1770][INFO    ][11594] Running state [/etc/haproxy/haproxy.cfg] at time 21:55:36.282328
2018-10-05 21:55:36,282 [salt.state       :1803][INFO    ][11594] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-05 21:55:36,501 [salt.state       :290 ][INFO    ][11594] File /etc/haproxy/haproxy.cfg is in the correct state
2018-10-05 21:55:36,501 [salt.state       :1941][INFO    ][11594] Completed state [/etc/haproxy/haproxy.cfg] at time 21:55:36.501730 duration_in_ms=219.402
2018-10-05 21:55:36,502 [salt.state       :1770][INFO    ][11594] Running state [/etc/haproxy/ssl] at time 21:55:36.502097
2018-10-05 21:55:36,502 [salt.state       :1803][INFO    ][11594] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-05 21:55:36,503 [salt.state       :290 ][INFO    ][11594] Directory /etc/haproxy/ssl is in the correct state
Directory /etc/haproxy/ssl updated
2018-10-05 21:55:36,503 [salt.state       :1941][INFO    ][11594] Completed state [/etc/haproxy/ssl] at time 21:55:36.503873 duration_in_ms=1.776
2018-10-05 21:55:36,504 [salt.state       :1770][INFO    ][11594] Running state [/etc/haproxy/errors/429.http11] at time 21:55:36.504194
2018-10-05 21:55:36,504 [salt.state       :1803][INFO    ][11594] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-05 21:55:36,525 [salt.state       :290 ][INFO    ][11594] File /etc/haproxy/errors/429.http11 is in the correct state
2018-10-05 21:55:36,525 [salt.state       :1941][INFO    ][11594] Completed state [/etc/haproxy/errors/429.http11] at time 21:55:36.525351 duration_in_ms=21.157
2018-10-05 21:55:36,525 [salt.state       :1770][INFO    ][11594] Running state [haproxy_status_packages] at time 21:55:36.525618
2018-10-05 21:55:36,525 [salt.state       :1803][INFO    ][11594] Executing state pkg.installed for [haproxy_status_packages]
2018-10-05 21:55:36,536 [salt.state       :290 ][INFO    ][11594] All specified packages are already installed
2018-10-05 21:55:36,536 [salt.state       :1941][INFO    ][11594] Completed state [haproxy_status_packages] at time 21:55:36.536829 duration_in_ms=11.21
2018-10-05 21:55:36,537 [salt.state       :1770][INFO    ][11594] Running state [/usr/bin/haproxy-status.sh] at time 21:55:36.537362
2018-10-05 21:55:36,537 [salt.state       :1803][INFO    ][11594] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-05 21:55:36,581 [salt.state       :290 ][INFO    ][11594] File /usr/bin/haproxy-status.sh is in the correct state
2018-10-05 21:55:36,581 [salt.state       :1941][INFO    ][11594] Completed state [/usr/bin/haproxy-status.sh] at time 21:55:36.581460 duration_in_ms=44.098
2018-10-05 21:55:36,582 [salt.state       :1770][INFO    ][11594] Running state [net.ipv4.ip_nonlocal_bind] at time 21:55:36.582893
2018-10-05 21:55:36,583 [salt.state       :1803][INFO    ][11594] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-05 21:55:36,604 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11594] Executing command 'sysctl -n net.ipv4.ip_nonlocal_bind' in directory '/root'
2018-10-05 21:55:36,624 [salt.state       :290 ][INFO    ][11594] Sysctl value net.ipv4.ip_nonlocal_bind = 1 is already set
2018-10-05 21:55:36,624 [salt.state       :1941][INFO    ][11594] Completed state [net.ipv4.ip_nonlocal_bind] at time 21:55:36.624458 duration_in_ms=41.565
2018-10-05 21:55:36,628 [salt.state       :1770][INFO    ][11594] Running state [haproxy] at time 21:55:36.628759
2018-10-05 21:55:36,629 [salt.state       :1803][INFO    ][11594] Executing state service.running for [haproxy]
2018-10-05 21:55:36,630 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11594] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-05 21:55:36,656 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11594] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-05 21:55:36,684 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11594] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-05 21:55:36,708 [salt.state       :290 ][INFO    ][11594] The service haproxy is already running
2018-10-05 21:55:36,709 [salt.state       :1941][INFO    ][11594] Completed state [haproxy] at time 21:55:36.709136 duration_in_ms=80.378
2018-10-05 21:55:36,712 [salt.minion      :1708][INFO    ][11594] Returning information for job: 20181005215525927083
2018-10-05 21:55:38,340 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command service.status with jid 20181005215538327467
2018-10-05 21:55:38,370 [salt.minion      :1431][INFO    ][11630] Starting a new job with PID 11630
2018-10-05 21:55:38,991 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11630] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-05 21:55:39,020 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11630] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-05 21:55:39,045 [salt.minion      :1708][INFO    ][11630] Returning information for job: 20181005215538327467
2018-10-05 21:55:40,356 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command service.restart with jid 20181005215540341107
2018-10-05 21:55:40,383 [salt.minion      :1431][INFO    ][11638] Starting a new job with PID 11638
2018-10-05 21:55:41,017 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11638] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-05 21:55:41,066 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11638] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-05 21:55:41,115 [salt.minion      :1708][INFO    ][11638] Returning information for job: 20181005215540341107
2018-10-05 22:13:09,068 [salt.utils.schedule:1375][INFO    ][2970] Running scheduled job: __mine_interval
2018-10-05 22:20:01,524 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005222001514086
2018-10-05 22:20:01,550 [salt.minion      :1431][INFO    ][11750] Starting a new job with PID 11750
2018-10-05 22:20:02,557 [salt.state       :905 ][INFO    ][11750] Loading fresh modules for state activity
2018-10-05 22:20:02,628 [salt.fileclient  :1215][INFO    ][11750] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-10-05 22:20:02,670 [salt.fileclient  :1215][INFO    ][11750] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-10-05 22:20:02,715 [salt.fileclient  :1215][INFO    ][11750] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-10-05 22:20:02,768 [salt.fileclient  :1215][INFO    ][11750] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-10-05 22:20:03,752 [salt.state       :1770][INFO    ][11750] Running state [redis-server] at time 22:20:03.752322
2018-10-05 22:20:03,754 [salt.state       :1803][INFO    ][11750] Executing state pkg.installed for [redis-server]
2018-10-05 22:20:03,756 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:20:04,328 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-10-05 22:20:04,508 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-05 22:20:06,655 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222006638005
2018-10-05 22:20:06,679 [salt.minion      :1431][INFO    ][12106] Starting a new job with PID 12106
2018-10-05 22:20:06,705 [salt.minion      :1708][INFO    ][12106] Returning information for job: 20181005222006638005
2018-10-05 22:20:09,866 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:20:09,905 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-10-05 22:20:14,756 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:20:14,812 [salt.state       :290 ][INFO    ][11750] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-10-05 22:20:14,841 [salt.state       :905 ][INFO    ][11750] Loading fresh modules for state activity
2018-10-05 22:20:14,906 [salt.state       :1941][INFO    ][11750] Completed state [redis-server] at time 22:20:14.905919 duration_in_ms=11153.598
2018-10-05 22:20:14,911 [salt.state       :1770][INFO    ][11750] Running state [vm.overcommit_memory] at time 22:20:14.911459
2018-10-05 22:20:14,911 [salt.state       :1803][INFO    ][11750] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-05 22:20:14,916 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-10-05 22:20:14,932 [salt.state       :290 ][INFO    ][11750] {'vm.overcommit_memory': 1}
2018-10-05 22:20:14,933 [salt.state       :1941][INFO    ][11750] Completed state [vm.overcommit_memory] at time 22:20:14.932938 duration_in_ms=21.479
2018-10-05 22:20:14,937 [salt.state       :1770][INFO    ][11750] Running state [/etc/redis/redis.conf] at time 22:20:14.937525
2018-10-05 22:20:14,937 [salt.state       :1803][INFO    ][11750] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-05 22:20:14,986 [salt.fileclient  :1215][INFO    ][11750] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-10-05 22:20:15,076 [salt.state       :290 ][INFO    ][11750] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.32
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -505,8 +505,7 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
-appendonly no
+appendonly yes
 
 # The name of the append only file (default: "appendonly.aof")
 
@@ -535,9 +534,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-10-05 22:20:15,076 [salt.state       :1941][INFO    ][11750] Completed state [/etc/redis/redis.conf] at time 22:20:15.076674 duration_in_ms=139.148
2018-10-05 22:20:15,711 [salt.state       :1770][INFO    ][11750] Running state [redis-server] at time 22:20:15.711589
2018-10-05 22:20:15,712 [salt.state       :1803][INFO    ][11750] Executing state service.running for [redis-server]
2018-10-05 22:20:15,712 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-05 22:20:15,749 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-05 22:20:15,773 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-05 22:20:15,796 [salt.state       :290 ][INFO    ][11750] The service redis-server is already running
2018-10-05 22:20:15,797 [salt.state       :1941][INFO    ][11750] Completed state [redis-server] at time 22:20:15.797883 duration_in_ms=86.295
2018-10-05 22:20:15,798 [salt.state       :1770][INFO    ][11750] Running state [redis-server] at time 22:20:15.798282
2018-10-05 22:20:15,798 [salt.state       :1803][INFO    ][11750] Executing state service.mod_watch for [redis-server]
2018-10-05 22:20:15,799 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-05 22:20:15,823 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-10-05 22:20:16,069 [salt.state       :290 ][INFO    ][11750] {'redis-server': True}
2018-10-05 22:20:16,070 [salt.state       :1941][INFO    ][11750] Completed state [redis-server] at time 22:20:16.070501 duration_in_ms=272.217
2018-10-05 22:20:16,077 [salt.state       :1770][INFO    ][11750] Running state [redis-sentinel] at time 22:20:16.077866
2018-10-05 22:20:16,078 [salt.state       :1803][INFO    ][11750] Executing state pkg.installed for [redis-sentinel]
2018-10-05 22:20:16,410 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:20:16,448 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-10-05 22:20:16,873 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222016862425
2018-10-05 22:20:16,899 [salt.minion      :1431][INFO    ][12714] Starting a new job with PID 12714
2018-10-05 22:20:16,921 [salt.minion      :1708][INFO    ][12714] Returning information for job: 20181005222016862425
2018-10-05 22:20:20,537 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:20:20,604 [salt.state       :290 ][INFO    ][11750] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-10-05 22:20:20,630 [salt.state       :905 ][INFO    ][11750] Loading fresh modules for state activity
2018-10-05 22:20:20,686 [salt.state       :1941][INFO    ][11750] Completed state [redis-sentinel] at time 22:20:20.686662 duration_in_ms=4608.794
2018-10-05 22:20:21,335 [salt.state       :1770][INFO    ][11750] Running state [/etc/redis/sentinel.conf] at time 22:20:21.335737
2018-10-05 22:20:21,336 [salt.state       :1803][INFO    ][11750] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-05 22:20:21,359 [salt.fileclient  :1215][INFO    ][11750] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-10-05 22:20:21,406 [salt.state       :290 ][INFO    ][11750] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.32
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-10-05 22:20:21,407 [salt.state       :1941][INFO    ][11750] Completed state [/etc/redis/sentinel.conf] at time 22:20:21.407049 duration_in_ms=71.312
2018-10-05 22:20:21,407 [salt.state       :1770][INFO    ][11750] Running state [redis-sentinel] at time 22:20:21.407440
2018-10-05 22:20:21,407 [salt.state       :1803][INFO    ][11750] Executing state service.running for [redis-sentinel]
2018-10-05 22:20:21,408 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-05 22:20:21,428 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-05 22:20:21,445 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-05 22:20:21,461 [salt.state       :290 ][INFO    ][11750] The service redis-sentinel is already running
2018-10-05 22:20:21,462 [salt.state       :1941][INFO    ][11750] Completed state [redis-sentinel] at time 22:20:21.462014 duration_in_ms=54.574
2018-10-05 22:20:21,462 [salt.state       :1770][INFO    ][11750] Running state [redis-sentinel] at time 22:20:21.462327
2018-10-05 22:20:21,462 [salt.state       :1803][INFO    ][11750] Executing state service.mod_watch for [redis-sentinel]
2018-10-05 22:20:21,463 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-05 22:20:21,485 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11750] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-10-05 22:20:21,842 [salt.state       :290 ][INFO    ][11750] {'redis-sentinel': True}
2018-10-05 22:20:21,843 [salt.state       :1941][INFO    ][11750] Completed state [redis-sentinel] at time 22:20:21.843085 duration_in_ms=380.757
2018-10-05 22:20:21,847 [salt.minion      :1708][INFO    ][11750] Returning information for job: 20181005222001514086
2018-10-05 22:20:22,573 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005222022562604
2018-10-05 22:20:22,599 [salt.minion      :1431][INFO    ][13059] Starting a new job with PID 13059
2018-10-05 22:20:27,693 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222027674112
2018-10-05 22:20:27,724 [salt.minion      :1431][INFO    ][13064] Starting a new job with PID 13064
2018-10-05 22:20:27,751 [salt.minion      :1708][INFO    ][13064] Returning information for job: 20181005222027674112
2018-10-05 22:20:29,577 [salt.state       :905 ][INFO    ][13059] Loading fresh modules for state activity
2018-10-05 22:20:30,704 [salt.state       :1770][INFO    ][13059] Running state [redis-server] at time 22:20:30.703949
2018-10-05 22:20:30,704 [salt.state       :1803][INFO    ][13059] Executing state pkg.installed for [redis-server]
2018-10-05 22:20:30,705 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13059] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:20:31,280 [salt.state       :290 ][INFO    ][13059] All specified packages are already installed
2018-10-05 22:20:31,281 [salt.state       :1941][INFO    ][13059] Completed state [redis-server] at time 22:20:31.281487 duration_in_ms=577.538
2018-10-05 22:20:31,283 [salt.state       :1770][INFO    ][13059] Running state [vm.overcommit_memory] at time 22:20:31.283941
2018-10-05 22:20:31,284 [salt.state       :1803][INFO    ][13059] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-05 22:20:31,308 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13059] Executing command 'sysctl -n vm.overcommit_memory' in directory '/root'
2018-10-05 22:20:31,330 [salt.state       :290 ][INFO    ][13059] Sysctl value vm.overcommit_memory = 1 is already set
2018-10-05 22:20:31,332 [salt.state       :1941][INFO    ][13059] Completed state [vm.overcommit_memory] at time 22:20:31.332266 duration_in_ms=48.325
2018-10-05 22:20:31,340 [salt.state       :1770][INFO    ][13059] Running state [/etc/redis/redis.conf] at time 22:20:31.340782
2018-10-05 22:20:31,341 [salt.state       :1803][INFO    ][13059] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-05 22:20:31,449 [salt.state       :290 ][INFO    ][13059] File /etc/redis/redis.conf is in the correct state
2018-10-05 22:20:31,450 [salt.state       :1941][INFO    ][13059] Completed state [/etc/redis/redis.conf] at time 22:20:31.450102 duration_in_ms=109.32
2018-10-05 22:20:31,451 [salt.state       :1770][INFO    ][13059] Running state [redis-server] at time 22:20:31.451614
2018-10-05 22:20:31,452 [salt.state       :1803][INFO    ][13059] Executing state service.running for [redis-server]
2018-10-05 22:20:31,453 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13059] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-05 22:20:31,479 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13059] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-05 22:20:31,500 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13059] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-05 22:20:31,519 [salt.state       :290 ][INFO    ][13059] The service redis-server is already running
2018-10-05 22:20:31,520 [salt.state       :1941][INFO    ][13059] Completed state [redis-server] at time 22:20:31.520466 duration_in_ms=68.853
2018-10-05 22:20:31,521 [salt.state       :1770][INFO    ][13059] Running state [redis-sentinel] at time 22:20:31.521645
2018-10-05 22:20:31,522 [salt.state       :1803][INFO    ][13059] Executing state pkg.installed for [redis-sentinel]
2018-10-05 22:20:31,536 [salt.state       :290 ][INFO    ][13059] All specified packages are already installed
2018-10-05 22:20:31,536 [salt.state       :1941][INFO    ][13059] Completed state [redis-sentinel] at time 22:20:31.536829 duration_in_ms=15.185
2018-10-05 22:20:31,538 [salt.state       :1770][INFO    ][13059] Running state [/etc/redis/sentinel.conf] at time 22:20:31.538373
2018-10-05 22:20:31,539 [salt.state       :1803][INFO    ][13059] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-05 22:20:31,609 [salt.state       :290 ][INFO    ][13059] File /etc/redis/sentinel.conf is in the correct state
2018-10-05 22:20:31,609 [salt.state       :1941][INFO    ][13059] Completed state [/etc/redis/sentinel.conf] at time 22:20:31.609768 duration_in_ms=71.395
2018-10-05 22:20:31,610 [salt.state       :1770][INFO    ][13059] Running state [redis-sentinel] at time 22:20:31.610148
2018-10-05 22:20:31,610 [salt.state       :1803][INFO    ][13059] Executing state service.running for [redis-sentinel]
2018-10-05 22:20:31,611 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13059] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-05 22:20:31,638 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13059] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-05 22:20:31,662 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13059] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-05 22:20:31,683 [salt.state       :290 ][INFO    ][13059] The service redis-sentinel is already running
2018-10-05 22:20:31,684 [salt.state       :1941][INFO    ][13059] Completed state [redis-sentinel] at time 22:20:31.684469 duration_in_ms=74.321
2018-10-05 22:20:31,686 [salt.minion      :1708][INFO    ][13059] Returning information for job: 20181005222022562604
2018-10-05 22:20:49,573 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command test.ping with jid 20181005222049561003
2018-10-05 22:20:49,598 [salt.minion      :1431][INFO    ][13111] Starting a new job with PID 13111
2018-10-05 22:20:49,625 [salt.minion      :1708][INFO    ][13111] Returning information for job: 20181005222049561003
2018-10-05 22:22:20,891 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005222220873588
2018-10-05 22:22:20,918 [salt.minion      :1431][INFO    ][13116] Starting a new job with PID 13116
2018-10-05 22:22:25,909 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222225896695
2018-10-05 22:22:25,937 [salt.minion      :1431][INFO    ][13121] Starting a new job with PID 13121
2018-10-05 22:22:25,966 [salt.minion      :1708][INFO    ][13121] Returning information for job: 20181005222225896695
2018-10-05 22:22:27,327 [salt.state       :905 ][INFO    ][13116] Loading fresh modules for state activity
2018-10-05 22:22:27,411 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-10-05 22:22:27,453 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-10-05 22:22:27,538 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-10-05 22:22:27,582 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-10-05 22:22:27,626 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-10-05 22:22:27,738 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-10-05 22:22:27,848 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-10-05 22:22:27,957 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-10-05 22:22:28,148 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-10-05 22:22:28,238 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-10-05 22:22:28,333 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-10-05 22:22:28,412 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-10-05 22:22:29,395 [salt.state       :1770][INFO    ][13116] Running state [apache2] at time 22:22:29.395662
2018-10-05 22:22:29,396 [salt.state       :1803][INFO    ][13116] Executing state pkg.installed for [apache2]
2018-10-05 22:22:29,396 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:22:29,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-10-05 22:22:30,138 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-05 22:22:32,655 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:22:32,694 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-10-05 22:22:36,032 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222236017081
2018-10-05 22:22:36,060 [salt.minion      :1431][INFO    ][14124] Starting a new job with PID 14124
2018-10-05 22:22:36,104 [salt.minion      :1708][INFO    ][14124] Returning information for job: 20181005222236017081
2018-10-05 22:22:41,748 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:22:41,811 [salt.state       :290 ][INFO    ][13116] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-10-05 22:22:41,846 [salt.state       :905 ][INFO    ][13116] Loading fresh modules for state activity
2018-10-05 22:22:41,903 [salt.state       :1941][INFO    ][13116] Completed state [apache2] at time 22:22:41.903335 duration_in_ms=12507.674
2018-10-05 22:22:41,911 [salt.state       :1770][INFO    ][13116] Running state [openssl] at time 22:22:41.911054
2018-10-05 22:22:41,911 [salt.state       :1803][INFO    ][13116] Executing state pkg.installed for [openssl]
2018-10-05 22:22:42,853 [salt.state       :290 ][INFO    ][13116] All specified packages are already installed
2018-10-05 22:22:42,854 [salt.state       :1941][INFO    ][13116] Completed state [openssl] at time 22:22:42.853958 duration_in_ms=942.903
2018-10-05 22:22:42,855 [salt.state       :1770][INFO    ][13116] Running state [a2enmod rewrite] at time 22:22:42.855728
2018-10-05 22:22:42,856 [salt.state       :1803][INFO    ][13116] Executing state cmd.run for [a2enmod rewrite]
2018-10-05 22:22:42,857 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command 'a2enmod rewrite' in directory '/root'
2018-10-05 22:22:42,944 [salt.state       :290 ][INFO    ][13116] {'pid': 14643, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-05 22:22:42,945 [salt.state       :1941][INFO    ][13116] Completed state [a2enmod rewrite] at time 22:22:42.945466 duration_in_ms=89.737
2018-10-05 22:22:42,946 [salt.state       :1770][INFO    ][13116] Running state [libapache2-mod-wsgi] at time 22:22:42.946714
2018-10-05 22:22:42,947 [salt.state       :1803][INFO    ][13116] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-05 22:22:42,988 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:22:43,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-10-05 22:22:46,219 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222246207478
2018-10-05 22:22:46,247 [salt.minion      :1431][INFO    ][14895] Starting a new job with PID 14895
2018-10-05 22:22:46,271 [salt.minion      :1708][INFO    ][14895] Returning information for job: 20181005222246207478
2018-10-05 22:22:48,348 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:22:48,408 [salt.state       :290 ][INFO    ][13116] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-10-05 22:22:48,438 [salt.state       :905 ][INFO    ][13116] Loading fresh modules for state activity
2018-10-05 22:22:48,488 [salt.state       :1941][INFO    ][13116] Completed state [libapache2-mod-wsgi] at time 22:22:48.488885 duration_in_ms=5542.171
2018-10-05 22:22:48,492 [salt.state       :1770][INFO    ][13116] Running state [a2enmod wsgi] at time 22:22:48.492118
2018-10-05 22:22:48,492 [salt.state       :1803][INFO    ][13116] Executing state cmd.run for [a2enmod wsgi]
2018-10-05 22:22:48,492 [salt.state       :290 ][INFO    ][13116] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-05 22:22:48,493 [salt.state       :1941][INFO    ][13116] Completed state [a2enmod wsgi] at time 22:22:48.493101 duration_in_ms=0.983
2018-10-05 22:22:48,499 [salt.state       :1770][INFO    ][13116] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:22:48.499539
2018-10-05 22:22:48,499 [salt.state       :1803][INFO    ][13116] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-05 22:22:48,546 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-10-05 22:22:48,620 [salt.state       :290 ][INFO    ][13116] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-10-05 22:22:48,621 [salt.state       :1941][INFO    ][13116] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:22:48.620974 duration_in_ms=121.435
2018-10-05 22:22:48,621 [salt.state       :1770][INFO    ][13116] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:22:48.621247
2018-10-05 22:22:48,621 [salt.state       :1803][INFO    ][13116] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-05 22:22:48,621 [salt.state       :290 ][INFO    ][13116] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-05 22:22:48,622 [salt.state       :1941][INFO    ][13116] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:22:48.622087 duration_in_ms=0.84
2018-10-05 22:22:48,622 [salt.state       :1770][INFO    ][13116] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:22:48.622322
2018-10-05 22:22:48,622 [salt.state       :1803][INFO    ][13116] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-05 22:22:48,622 [salt.state       :290 ][INFO    ][13116] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-10-05 22:22:48,623 [salt.state       :1941][INFO    ][13116] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:22:48.623085 duration_in_ms=0.763
2018-10-05 22:22:48,623 [salt.state       :1770][INFO    ][13116] Running state [a2enmod mpm_prefork] at time 22:22:48.623868
2018-10-05 22:22:48,624 [salt.state       :1803][INFO    ][13116] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-05 22:22:48,628 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-10-05 22:22:48,694 [salt.state       :290 ][INFO    ][13116] {'pid': 14961, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-05 22:22:48,694 [salt.state       :1941][INFO    ][13116] Completed state [a2enmod mpm_prefork] at time 22:22:48.694618 duration_in_ms=70.749
2018-10-05 22:22:48,695 [salt.state       :1770][INFO    ][13116] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:22:48.695153
2018-10-05 22:22:48,695 [salt.state       :1803][INFO    ][13116] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-05 22:22:48,696 [salt.state       :290 ][INFO    ][13116] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-05 22:22:48,697 [salt.state       :1941][INFO    ][13116] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:22:48.696954 duration_in_ms=1.801
2018-10-05 22:22:48,698 [salt.state       :1770][INFO    ][13116] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:22:48.698363
2018-10-05 22:22:48,698 [salt.state       :1803][INFO    ][13116] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-05 22:22:48,699 [salt.state       :290 ][INFO    ][13116] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-10-05 22:22:48,699 [salt.state       :1941][INFO    ][13116] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:22:48.699687 duration_in_ms=1.326
2018-10-05 22:22:48,702 [salt.state       :1770][INFO    ][13116] Running state [apache_server_service_task] at time 22:22:48.702119
2018-10-05 22:22:48,702 [salt.state       :1803][INFO    ][13116] Executing state test.show_notification for [apache_server_service_task]
2018-10-05 22:22:48,702 [salt.state       :290 ][INFO    ][13116] Running apache.server.service
2018-10-05 22:22:48,702 [salt.state       :1941][INFO    ][13116] Completed state [apache_server_service_task] at time 22:22:48.702873 duration_in_ms=0.754
2018-10-05 22:22:48,703 [salt.state       :1770][INFO    ][13116] Running state [/etc/apache2/ports.conf] at time 22:22:48.703476
2018-10-05 22:22:48,704 [salt.state       :1803][INFO    ][13116] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-05 22:22:48,727 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-10-05 22:22:48,796 [salt.state       :290 ][INFO    ][13116] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-10-05 22:22:48,796 [salt.state       :1941][INFO    ][13116] Completed state [/etc/apache2/ports.conf] at time 22:22:48.796861 duration_in_ms=93.385
2018-10-05 22:22:48,797 [salt.state       :1770][INFO    ][13116] Running state [/etc/apache2/conf-available/security.conf] at time 22:22:48.797734
2018-10-05 22:22:48,798 [salt.state       :1803][INFO    ][13116] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-05 22:22:48,818 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-10-05 22:22:48,897 [salt.state       :290 ][INFO    ][13116] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-10-05 22:22:48,897 [salt.state       :1941][INFO    ][13116] Completed state [/etc/apache2/conf-available/security.conf] at time 22:22:48.897398 duration_in_ms=99.664
2018-10-05 22:22:49,558 [salt.state       :1770][INFO    ][13116] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 22:22:49.558072
2018-10-05 22:22:49,558 [salt.state       :1803][INFO    ][13116] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-05 22:22:49,559 [salt.state       :290 ][INFO    ][13116] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-10-05 22:22:49,560 [salt.state       :1941][INFO    ][13116] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 22:22:49.559958 duration_in_ms=1.887
2018-10-05 22:22:49,560 [salt.state       :1770][INFO    ][13116] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:22:49.560480
2018-10-05 22:22:49,560 [salt.state       :1803][INFO    ][13116] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-05 22:22:49,584 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-10-05 22:22:49,625 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-10-05 22:22:49,713 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-10-05 22:22:49,746 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-10-05 22:22:49,863 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-10-05 22:22:49,897 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-10-05 22:22:49,927 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-10-05 22:22:49,943 [salt.state       :290 ][INFO    ][13116] File changed:
New file
2018-10-05 22:22:49,944 [salt.state       :1941][INFO    ][13116] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:22:49.944015 duration_in_ms=383.535
2018-10-05 22:22:49,945 [salt.state       :1770][INFO    ][13116] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:22:49.945184
2018-10-05 22:22:49,945 [salt.state       :1803][INFO    ][13116] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-05 22:22:50,231 [salt.state       :290 ][INFO    ][13116] File changed:
New file
2018-10-05 22:22:50,231 [salt.state       :1941][INFO    ][13116] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:22:50.231287 duration_in_ms=286.103
2018-10-05 22:22:50,233 [salt.state       :1770][INFO    ][13116] Running state [apache2] at time 22:22:50.233639
2018-10-05 22:22:50,233 [salt.state       :1803][INFO    ][13116] Executing state service.running for [apache2]
2018-10-05 22:22:50,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-05 22:22:50,263 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-05 22:22:50,287 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-05 22:22:50,315 [salt.state       :290 ][INFO    ][13116] The service apache2 is already running
2018-10-05 22:22:50,316 [salt.state       :1941][INFO    ][13116] Completed state [apache2] at time 22:22:50.316217 duration_in_ms=82.577
2018-10-05 22:22:50,316 [salt.state       :1770][INFO    ][13116] Running state [apache2] at time 22:22:50.316914
2018-10-05 22:22:50,317 [salt.state       :1803][INFO    ][13116] Executing state service.mod_watch for [apache2]
2018-10-05 22:22:50,318 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-05 22:22:50,341 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-10-05 22:22:50,552 [salt.state       :290 ][INFO    ][13116] {'apache2': True}
2018-10-05 22:22:50,554 [salt.state       :1941][INFO    ][13116] Completed state [apache2] at time 22:22:50.553041 duration_in_ms=236.126
2018-10-05 22:22:50,555 [salt.state       :1770][INFO    ][13116] Running state [/etc/apache2/conf-enabled/security.conf] at time 22:22:50.555468
2018-10-05 22:22:50,555 [salt.state       :1803][INFO    ][13116] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-05 22:22:50,566 [salt.state       :290 ][INFO    ][13116] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-10-05 22:22:50,568 [salt.state       :1941][INFO    ][13116] Completed state [/etc/apache2/conf-enabled/security.conf] at time 22:22:50.568028 duration_in_ms=12.56
2018-10-05 22:22:50,570 [salt.state       :1770][INFO    ][13116] Running state [gnocchi-common] at time 22:22:50.570836
2018-10-05 22:22:50,572 [salt.state       :1803][INFO    ][13116] Executing state pkg.installed for [gnocchi-common]
2018-10-05 22:22:50,906 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:22:50,947 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-10-05 22:22:56,385 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222256369732
2018-10-05 22:22:56,401 [salt.minion      :1431][INFO    ][15419] Starting a new job with PID 15419
2018-10-05 22:22:56,440 [salt.minion      :1708][INFO    ][15419] Returning information for job: 20181005222256369732
2018-10-05 22:23:06,563 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222306549373
2018-10-05 22:23:06,581 [salt.minion      :1431][INFO    ][16432] Starting a new job with PID 16432
2018-10-05 22:23:06,612 [salt.minion      :1708][INFO    ][16432] Returning information for job: 20181005222306549373
2018-10-05 22:23:16,742 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222316726755
2018-10-05 22:23:16,768 [salt.minion      :1431][INFO    ][17382] Starting a new job with PID 17382
2018-10-05 22:23:16,800 [salt.minion      :1708][INFO    ][17382] Returning information for job: 20181005222316726755
2018-10-05 22:23:26,925 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222326914729
2018-10-05 22:23:26,946 [salt.minion      :1431][INFO    ][17831] Starting a new job with PID 17831
2018-10-05 22:23:26,974 [salt.minion      :1708][INFO    ][17831] Returning information for job: 20181005222326914729
2018-10-05 22:23:34,816 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:23:34,882 [salt.state       :290 ][INFO    ][13116] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp4'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.1-1.0~u16.04+mcp16'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp5'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp6'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-10-05 22:23:34,917 [salt.state       :905 ][INFO    ][13116] Loading fresh modules for state activity
2018-10-05 22:23:34,975 [salt.state       :1941][INFO    ][13116] Completed state [gnocchi-common] at time 22:23:34.974989 duration_in_ms=44404.151
2018-10-05 22:23:34,980 [salt.state       :1770][INFO    ][13116] Running state [gnocchi_ssl_mysql] at time 22:23:34.980842
2018-10-05 22:23:34,981 [salt.state       :1803][INFO    ][13116] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-10-05 22:23:34,981 [salt.state       :290 ][INFO    ][13116] Running gnocchi._ssl.mysql
2018-10-05 22:23:34,982 [salt.state       :1941][INFO    ][13116] Completed state [gnocchi_ssl_mysql] at time 22:23:34.982943 duration_in_ms=2.101
2018-10-05 22:23:34,987 [salt.state       :1770][INFO    ][13116] Running state [/etc/gnocchi/gnocchi.conf] at time 22:23:34.987809
2018-10-05 22:23:34,989 [salt.state       :1803][INFO    ][13116] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-10-05 22:23:35,025 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-10-05 22:23:35,154 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-10-05 22:23:35,174 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-10-05 22:23:35,211 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-10-05 22:23:35,269 [salt.fileclient  :1215][INFO    ][13116] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-10-05 22:23:35,278 [salt.state       :290 ][INFO    ][13116] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -515,153 +316,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +480,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.32:6379

2018-10-05 22:23:35,287 [salt.state       :1941][INFO    ][13116] Completed state [/etc/gnocchi/gnocchi.conf] at time 22:23:35.287137 duration_in_ms=299.327
2018-10-05 22:23:35,300 [salt.state       :1770][INFO    ][13116] Running state [gnocchi-api] at time 22:23:35.300000
2018-10-05 22:23:35,300 [salt.state       :1803][INFO    ][13116] Executing state pkg.installed for [gnocchi-api]
2018-10-05 22:23:37,111 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222337093110
2018-10-05 22:23:37,131 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:23:37,142 [salt.minion      :1431][INFO    ][18185] Starting a new job with PID 18185
2018-10-05 22:23:37,166 [salt.minion      :1708][INFO    ][18185] Returning information for job: 20181005222337093110
2018-10-05 22:23:37,175 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-10-05 22:23:47,315 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222347293535
2018-10-05 22:23:47,327 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:23:47,347 [salt.minion      :1431][INFO    ][19044] Starting a new job with PID 19044
2018-10-05 22:23:47,375 [salt.minion      :1708][INFO    ][19044] Returning information for job: 20181005222347293535
2018-10-05 22:23:47,407 [salt.state       :290 ][INFO    ][13116] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp13'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-10-05 22:23:47,444 [salt.state       :905 ][INFO    ][13116] Loading fresh modules for state activity
2018-10-05 22:23:47,492 [salt.state       :1941][INFO    ][13116] Completed state [gnocchi-api] at time 22:23:47.492266 duration_in_ms=12192.266
2018-10-05 22:23:47,500 [salt.state       :1770][INFO    ][13116] Running state [gnocchi-metricd] at time 22:23:47.500011
2018-10-05 22:23:47,500 [salt.state       :1803][INFO    ][13116] Executing state pkg.installed for [gnocchi-metricd]
2018-10-05 22:23:48,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:23:48,910 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-10-05 22:23:52,558 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:23:52,623 [salt.state       :290 ][INFO    ][13116] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-10-05 22:23:52,661 [salt.state       :905 ][INFO    ][13116] Loading fresh modules for state activity
2018-10-05 22:23:52,930 [salt.state       :1941][INFO    ][13116] Completed state [gnocchi-metricd] at time 22:23:52.929916 duration_in_ms=5429.904
2018-10-05 22:23:52,939 [salt.state       :1770][INFO    ][13116] Running state [python-memcache] at time 22:23:52.939860
2018-10-05 22:23:52,940 [salt.state       :1803][INFO    ][13116] Executing state pkg.installed for [python-memcache]
2018-10-05 22:23:53,888 [salt.state       :290 ][INFO    ][13116] All specified packages are already installed
2018-10-05 22:23:53,889 [salt.state       :1941][INFO    ][13116] Completed state [python-memcache] at time 22:23:53.889111 duration_in_ms=949.25
2018-10-05 22:23:53,891 [salt.state       :1770][INFO    ][13116] Running state [gnocchi-upgrade] at time 22:23:53.891089
2018-10-05 22:23:53,891 [salt.state       :1803][INFO    ][13116] Executing state cmd.run for [gnocchi-upgrade]
2018-10-05 22:23:53,892 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-10-05 22:23:56,573 [salt.state       :290 ][INFO    ][13116] {'pid': 19338, 'retcode': 0, 'stderr': '2018-10-05 22:23:55,736 [19345] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-10-05 22:23:56,254 [19345] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2018-10-05 22:23:56,466 [19345] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.32,port=6379,db=0>>>\n2018-10-05 22:23:56,469 [19345] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-10-05 22:23:56,574 [salt.state       :1941][INFO    ][13116] Completed state [gnocchi-upgrade] at time 22:23:56.574169 duration_in_ms=2683.078
2018-10-05 22:23:56,576 [salt.state       :1770][INFO    ][13116] Running state [wsgi_gnocchi] at time 22:23:56.576527
2018-10-05 22:23:56,576 [salt.state       :1803][INFO    ][13116] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-10-05 22:23:56,578 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-10-05 22:23:56,658 [salt.state       :290 ][INFO    ][13116] {'new': 'wsgi_gnocchi', 'old': None}
2018-10-05 22:23:56,659 [salt.state       :1941][INFO    ][13116] Completed state [wsgi_gnocchi] at time 22:23:56.659631 duration_in_ms=83.104
2018-10-05 22:23:56,663 [salt.state       :1770][INFO    ][13116] Running state [apache2] at time 22:23:56.663131
2018-10-05 22:23:56,663 [salt.state       :1803][INFO    ][13116] Executing state service.running for [apache2]
2018-10-05 22:23:56,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-05 22:23:56,697 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-05 22:23:56,734 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-10-05 22:23:57,491 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222357481390
2018-10-05 22:23:57,513 [salt.minion      :1431][INFO    ][19434] Starting a new job with PID 19434
2018-10-05 22:23:57,555 [salt.minion      :1708][INFO    ][19434] Returning information for job: 20181005222357481390
2018-10-05 22:23:58,011 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-05 22:23:58,040 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-05 22:23:58,077 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-05 22:23:58,115 [salt.state       :290 ][INFO    ][13116] {'apache2': True}
2018-10-05 22:23:58,116 [salt.state       :1941][INFO    ][13116] Completed state [apache2] at time 22:23:58.116383 duration_in_ms=1453.251
2018-10-05 22:23:58,117 [salt.state       :1770][INFO    ][13116] Running state [gnocchi-metricd] at time 22:23:58.117731
2018-10-05 22:23:58,118 [salt.state       :1803][INFO    ][13116] Executing state service.running for [gnocchi-metricd]
2018-10-05 22:23:58,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-10-05 22:23:58,168 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-05 22:23:58,198 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-05 22:23:58,232 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-10-05 22:23:58,300 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-05 22:23:58,332 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-05 22:23:58,361 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-05 22:23:58,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-10-05 22:23:59,333 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13116] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-05 22:23:59,360 [salt.state       :290 ][INFO    ][13116] {'gnocchi-metricd': True}
2018-10-05 22:23:59,361 [salt.state       :1941][INFO    ][13116] Completed state [gnocchi-metricd] at time 22:23:59.361340 duration_in_ms=1243.609
2018-10-05 22:23:59,377 [salt.minion      :1708][INFO    ][13116] Returning information for job: 20181005222220873588
2018-10-05 22:25:43,184 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command test.ping with jid 20181005222543174002
2018-10-05 22:25:43,214 [salt.minion      :1431][INFO    ][19648] Starting a new job with PID 19648
2018-10-05 22:25:43,242 [salt.minion      :1708][INFO    ][19648] Returning information for job: 20181005222543174002
2018-10-05 22:26:05,760 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005222605744316
2018-10-05 22:26:05,786 [salt.minion      :1431][INFO    ][19654] Starting a new job with PID 19654
2018-10-05 22:26:10,782 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222610766205
2018-10-05 22:26:10,814 [salt.minion      :1431][INFO    ][19659] Starting a new job with PID 19659
2018-10-05 22:26:10,841 [salt.minion      :1708][INFO    ][19659] Returning information for job: 20181005222610766205
2018-10-05 22:26:11,991 [salt.state       :905 ][INFO    ][19654] Loading fresh modules for state activity
2018-10-05 22:26:12,066 [salt.fileclient  :1215][INFO    ][19654] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-10-05 22:26:12,110 [salt.fileclient  :1215][INFO    ][19654] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-10-05 22:26:12,919 [salt.fileclient  :1215][INFO    ][19654] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-10-05 22:26:15,124 [salt.state       :1770][INFO    ][19654] Running state [apache2] at time 22:26:15.124430
2018-10-05 22:26:15,125 [salt.state       :1803][INFO    ][19654] Executing state pkg.installed for [apache2]
2018-10-05 22:26:15,127 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:26:15,733 [salt.state       :290 ][INFO    ][19654] All specified packages are already installed
2018-10-05 22:26:15,734 [salt.state       :1941][INFO    ][19654] Completed state [apache2] at time 22:26:15.734651 duration_in_ms=610.221
2018-10-05 22:26:15,735 [salt.state       :1770][INFO    ][19654] Running state [openssl] at time 22:26:15.735142
2018-10-05 22:26:15,735 [salt.state       :1803][INFO    ][19654] Executing state pkg.installed for [openssl]
2018-10-05 22:26:15,748 [salt.state       :290 ][INFO    ][19654] All specified packages are already installed
2018-10-05 22:26:15,749 [salt.state       :1941][INFO    ][19654] Completed state [openssl] at time 22:26:15.749239 duration_in_ms=14.096
2018-10-05 22:26:15,749 [salt.state       :1770][INFO    ][19654] Running state [a2enmod rewrite] at time 22:26:15.749955
2018-10-05 22:26:15,750 [salt.state       :1803][INFO    ][19654] Executing state cmd.run for [a2enmod rewrite]
2018-10-05 22:26:15,750 [salt.state       :290 ][INFO    ][19654] /etc/apache2/mods-enabled/rewrite.load exists
2018-10-05 22:26:15,751 [salt.state       :1941][INFO    ][19654] Completed state [a2enmod rewrite] at time 22:26:15.751034 duration_in_ms=1.079
2018-10-05 22:26:15,751 [salt.state       :1770][INFO    ][19654] Running state [libapache2-mod-wsgi] at time 22:26:15.751558
2018-10-05 22:26:15,752 [salt.state       :1803][INFO    ][19654] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-05 22:26:15,764 [salt.state       :290 ][INFO    ][19654] All specified packages are already installed
2018-10-05 22:26:15,765 [salt.state       :1941][INFO    ][19654] Completed state [libapache2-mod-wsgi] at time 22:26:15.765022 duration_in_ms=13.464
2018-10-05 22:26:15,766 [salt.state       :1770][INFO    ][19654] Running state [a2enmod wsgi] at time 22:26:15.766522
2018-10-05 22:26:15,767 [salt.state       :1803][INFO    ][19654] Executing state cmd.run for [a2enmod wsgi]
2018-10-05 22:26:15,767 [salt.state       :290 ][INFO    ][19654] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-05 22:26:15,767 [salt.state       :1941][INFO    ][19654] Completed state [a2enmod wsgi] at time 22:26:15.767840 duration_in_ms=1.318
2018-10-05 22:26:15,776 [salt.state       :1770][INFO    ][19654] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:26:15.776930
2018-10-05 22:26:15,777 [salt.state       :1803][INFO    ][19654] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-05 22:26:16,113 [salt.state       :290 ][INFO    ][19654] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-10-05 22:26:16,113 [salt.state       :1941][INFO    ][19654] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:26:16.113725 duration_in_ms=336.795
2018-10-05 22:26:16,114 [salt.state       :1770][INFO    ][19654] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:26:16.114547
2018-10-05 22:26:16,115 [salt.state       :1803][INFO    ][19654] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-05 22:26:16,115 [salt.state       :290 ][INFO    ][19654] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-05 22:26:16,116 [salt.state       :1941][INFO    ][19654] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:26:16.116063 duration_in_ms=1.517
2018-10-05 22:26:16,117 [salt.state       :1770][INFO    ][19654] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:26:16.117179
2018-10-05 22:26:16,118 [salt.state       :1803][INFO    ][19654] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-05 22:26:16,119 [salt.state       :290 ][INFO    ][19654] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-10-05 22:26:16,119 [salt.state       :1941][INFO    ][19654] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:26:16.119849 duration_in_ms=2.67
2018-10-05 22:26:16,121 [salt.state       :1770][INFO    ][19654] Running state [a2enmod mpm_prefork] at time 22:26:16.121197
2018-10-05 22:26:16,122 [salt.state       :1803][INFO    ][19654] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-05 22:26:16,123 [salt.state       :290 ][INFO    ][19654] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-10-05 22:26:16,123 [salt.state       :1941][INFO    ][19654] Completed state [a2enmod mpm_prefork] at time 22:26:16.123666 duration_in_ms=2.469
2018-10-05 22:26:16,124 [salt.state       :1770][INFO    ][19654] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:26:16.124125
2018-10-05 22:26:16,124 [salt.state       :1803][INFO    ][19654] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-05 22:26:16,125 [salt.state       :290 ][INFO    ][19654] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-05 22:26:16,126 [salt.state       :1941][INFO    ][19654] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:26:16.126516 duration_in_ms=2.391
2018-10-05 22:26:16,127 [salt.state       :1770][INFO    ][19654] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:26:16.126967
2018-10-05 22:26:16,127 [salt.state       :1803][INFO    ][19654] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-05 22:26:16,127 [salt.state       :290 ][INFO    ][19654] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-10-05 22:26:16,128 [salt.state       :1941][INFO    ][19654] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:26:16.128404 duration_in_ms=1.437
2018-10-05 22:26:16,129 [salt.state       :1770][INFO    ][19654] Running state [apache_server_service_task] at time 22:26:16.129898
2018-10-05 22:26:16,131 [salt.state       :1803][INFO    ][19654] Executing state test.show_notification for [apache_server_service_task]
2018-10-05 22:26:16,132 [salt.state       :290 ][INFO    ][19654] Running apache.server.service
2018-10-05 22:26:16,132 [salt.state       :1941][INFO    ][19654] Completed state [apache_server_service_task] at time 22:26:16.132762 duration_in_ms=2.864
2018-10-05 22:26:16,133 [salt.state       :1770][INFO    ][19654] Running state [/etc/apache2/ports.conf] at time 22:26:16.133216
2018-10-05 22:26:16,133 [salt.state       :1803][INFO    ][19654] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-05 22:26:16,228 [salt.state       :290 ][INFO    ][19654] File /etc/apache2/ports.conf is in the correct state
2018-10-05 22:26:16,228 [salt.state       :1941][INFO    ][19654] Completed state [/etc/apache2/ports.conf] at time 22:26:16.228448 duration_in_ms=95.231
2018-10-05 22:26:16,228 [salt.state       :1770][INFO    ][19654] Running state [/etc/apache2/conf-available/security.conf] at time 22:26:16.228926
2018-10-05 22:26:16,229 [salt.state       :1803][INFO    ][19654] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-05 22:26:16,325 [salt.state       :290 ][INFO    ][19654] File /etc/apache2/conf-available/security.conf is in the correct state
2018-10-05 22:26:16,326 [salt.state       :1941][INFO    ][19654] Completed state [/etc/apache2/conf-available/security.conf] at time 22:26:16.325979 duration_in_ms=97.053
2018-10-05 22:26:16,334 [salt.state       :1770][INFO    ][19654] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 22:26:16.334430
2018-10-05 22:26:16,334 [salt.state       :1803][INFO    ][19654] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-05 22:26:16,335 [salt.state       :290 ][INFO    ][19654] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-10-05 22:26:16,335 [salt.state       :1941][INFO    ][19654] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 22:26:16.335227 duration_in_ms=0.797
2018-10-05 22:26:16,335 [salt.state       :1770][INFO    ][19654] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:26:16.335708
2018-10-05 22:26:16,336 [salt.state       :1803][INFO    ][19654] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-05 22:26:16,652 [salt.state       :290 ][INFO    ][19654] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-10-05 22:26:16,653 [salt.state       :1941][INFO    ][19654] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:26:16.653563 duration_in_ms=317.855
2018-10-05 22:26:16,654 [salt.state       :1770][INFO    ][19654] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:26:16.654637
2018-10-05 22:26:16,655 [salt.state       :1803][INFO    ][19654] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-05 22:26:16,943 [salt.state       :290 ][INFO    ][19654] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-10-05 22:26:16,944 [salt.state       :1941][INFO    ][19654] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:26:16.944144 duration_in_ms=289.506
2018-10-05 22:26:16,946 [salt.state       :1770][INFO    ][19654] Running state [apache2] at time 22:26:16.946332
2018-10-05 22:26:16,946 [salt.state       :1803][INFO    ][19654] Executing state service.running for [apache2]
2018-10-05 22:26:16,948 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-05 22:26:17,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-05 22:26:17,031 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-05 22:26:17,063 [salt.state       :290 ][INFO    ][19654] The service apache2 is already running
2018-10-05 22:26:17,065 [salt.state       :1941][INFO    ][19654] Completed state [apache2] at time 22:26:17.065336 duration_in_ms=119.004
2018-10-05 22:26:17,067 [salt.state       :1770][INFO    ][19654] Running state [/etc/apache2/conf-enabled/security.conf] at time 22:26:17.067070
2018-10-05 22:26:17,068 [salt.state       :1803][INFO    ][19654] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-05 22:26:17,074 [salt.state       :290 ][INFO    ][19654] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-10-05 22:26:17,075 [salt.state       :1941][INFO    ][19654] Completed state [/etc/apache2/conf-enabled/security.conf] at time 22:26:17.075310 duration_in_ms=8.241
2018-10-05 22:26:17,076 [salt.state       :1770][INFO    ][19654] Running state [panko-api] at time 22:26:17.076508
2018-10-05 22:26:17,077 [salt.state       :1803][INFO    ][19654] Executing state pkg.installed for [panko-api]
2018-10-05 22:26:17,122 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-10-05 22:26:17,296 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-05 22:26:19,873 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:26:19,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-10-05 22:26:20,906 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222620894857
2018-10-05 22:26:20,929 [salt.minion      :1431][INFO    ][20083] Starting a new job with PID 20083
2018-10-05 22:26:20,957 [salt.minion      :1708][INFO    ][20083] Returning information for job: 20181005222620894857
2018-10-05 22:26:23,965 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:26:24,037 [salt.state       :290 ][INFO    ][19654] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-10-05 22:26:24,088 [salt.state       :905 ][INFO    ][19654] Loading fresh modules for state activity
2018-10-05 22:26:24,147 [salt.state       :1941][INFO    ][19654] Completed state [panko-api] at time 22:26:24.147136 duration_in_ms=7070.627
2018-10-05 22:26:24,150 [salt.state       :1770][INFO    ][19654] Running state [panko_ssl_mysql] at time 22:26:24.150796
2018-10-05 22:26:24,151 [salt.state       :1803][INFO    ][19654] Executing state test.show_notification for [panko_ssl_mysql]
2018-10-05 22:26:24,151 [salt.state       :290 ][INFO    ][19654] Running panko._ssl.mysql
2018-10-05 22:26:24,151 [salt.state       :1941][INFO    ][19654] Completed state [panko_ssl_mysql] at time 22:26:24.151665 duration_in_ms=0.869
2018-10-05 22:26:24,153 [salt.state       :1770][INFO    ][19654] Running state [/etc/panko/panko.conf] at time 22:26:24.153820
2018-10-05 22:26:24,154 [salt.state       :1803][INFO    ][19654] Executing state file.managed for [/etc/panko/panko.conf]
2018-10-05 22:26:24,191 [salt.fileclient  :1215][INFO    ][19654] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-10-05 22:26:24,256 [salt.fileclient  :1215][INFO    ][19654] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-10-05 22:26:24,282 [salt.fileclient  :1215][INFO    ][19654] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-10-05 22:26:24,378 [salt.state       :290 ][INFO    ][19654] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -466,110 +481,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-10-05 22:26:24,387 [salt.state       :1941][INFO    ][19654] Completed state [/etc/panko/panko.conf] at time 22:26:24.386840 duration_in_ms=233.019
2018-10-05 22:26:24,401 [salt.state       :1770][INFO    ][19654] Running state [/usr/bin/panko-expirer --use-syslog] at time 22:26:24.400994
2018-10-05 22:26:24,401 [salt.state       :1803][INFO    ][19654] Executing state cron.present for [/usr/bin/panko-expirer --use-syslog]
2018-10-05 22:26:24,412 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command 'crontab -u panko -l' in directory '/root'
2018-10-05 22:26:24,457 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][19654] Command '['crontab', '-u', 'panko', '-l']' failed with return code: 1
2018-10-05 22:26:24,458 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][19654] stderr: no crontab for panko

2018-10-05 22:26:24,458 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][19654] retcode: 1
2018-10-05 22:26:24,459 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command 'crontab -u panko /tmp/__salt.tmp.XSRgdE' in directory '/root'
2018-10-05 22:26:24,493 [salt.state       :290 ][INFO    ][19654] {'panko': '/usr/bin/panko-expirer --use-syslog'}
2018-10-05 22:26:24,494 [salt.state       :1941][INFO    ][19654] Completed state [/usr/bin/panko-expirer --use-syslog] at time 22:26:24.494264 duration_in_ms=93.27
2018-10-05 22:26:24,496 [salt.state       :1770][INFO    ][19654] Running state [panko-dbsync] at time 22:26:24.496369
2018-10-05 22:26:24,497 [salt.state       :1803][INFO    ][19654] Executing state cmd.run for [panko-dbsync]
2018-10-05 22:26:24,497 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command 'panko-dbsync' in directory '/root'
2018-10-05 22:26:26,689 [salt.state       :290 ][INFO    ][19654] {'pid': 20281, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-05 22:26:26,690 [salt.state       :1941][INFO    ][19654] Completed state [panko-dbsync] at time 22:26:26.690827 duration_in_ms=2194.457
2018-10-05 22:26:26,702 [salt.state       :1770][INFO    ][19654] Running state [wsgi_panko] at time 22:26:26.701963
2018-10-05 22:26:26,702 [salt.state       :1803][INFO    ][19654] Executing state apache_site.enabled for [wsgi_panko]
2018-10-05 22:26:26,703 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-10-05 22:26:26,781 [salt.state       :290 ][INFO    ][19654] {'new': 'wsgi_panko', 'old': None}
2018-10-05 22:26:26,782 [salt.state       :1941][INFO    ][19654] Completed state [wsgi_panko] at time 22:26:26.782093 duration_in_ms=80.129
2018-10-05 22:26:27,457 [salt.state       :1770][INFO    ][19654] Running state [apache2] at time 22:26:27.457043
2018-10-05 22:26:27,457 [salt.state       :1803][INFO    ][19654] Executing state service.running for [apache2]
2018-10-05 22:26:27,458 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-05 22:26:27,481 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-05 22:26:27,510 [salt.state       :290 ][INFO    ][19654] The service apache2 is already running
2018-10-05 22:26:27,511 [salt.state       :1941][INFO    ][19654] Completed state [apache2] at time 22:26:27.510989 duration_in_ms=53.946
2018-10-05 22:26:27,511 [salt.state       :1770][INFO    ][19654] Running state [apache2] at time 22:26:27.511497
2018-10-05 22:26:27,512 [salt.state       :1803][INFO    ][19654] Executing state service.mod_watch for [apache2]
2018-10-05 22:26:27,513 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-05 22:26:27,537 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19654] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-05 22:26:29,895 [salt.state       :290 ][INFO    ][19654] {'apache2': True}
2018-10-05 22:26:29,896 [salt.state       :1941][INFO    ][19654] Completed state [apache2] at time 22:26:29.896070 duration_in_ms=2384.573
2018-10-05 22:26:29,899 [salt.minion      :1708][INFO    ][19654] Returning information for job: 20181005222605744316
2018-10-05 22:26:55,368 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command test.ping with jid 20181005222655356576
2018-10-05 22:26:55,395 [salt.minion      :1431][INFO    ][20447] Starting a new job with PID 20447
2018-10-05 22:26:55,422 [salt.minion      :1708][INFO    ][20447] Returning information for job: 20181005222655356576
2018-10-05 22:28:17,814 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005222817802663
2018-10-05 22:28:17,839 [salt.minion      :1431][INFO    ][20452] Starting a new job with PID 20452
2018-10-05 22:28:22,836 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222822820134
2018-10-05 22:28:22,862 [salt.minion      :1431][INFO    ][20457] Starting a new job with PID 20457
2018-10-05 22:28:22,893 [salt.minion      :1708][INFO    ][20457] Returning information for job: 20181005222822820134
2018-10-05 22:28:24,048 [salt.state       :905 ][INFO    ][20452] Loading fresh modules for state activity
2018-10-05 22:28:24,122 [salt.fileclient  :1215][INFO    ][20452] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-10-05 22:28:24,163 [salt.fileclient  :1215][INFO    ][20452] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-10-05 22:28:24,387 [salt.fileclient  :1215][INFO    ][20452] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-10-05 22:28:24,463 [salt.fileclient  :1215][INFO    ][20452] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-10-05 22:28:26,864 [salt.state       :1770][INFO    ][20452] Running state [aodh-api] at time 22:28:26.864395
2018-10-05 22:28:26,864 [salt.state       :1803][INFO    ][20452] Executing state pkg.installed for [aodh-api]
2018-10-05 22:28:26,866 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:28:27,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-10-05 22:28:27,639 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-05 22:28:30,111 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:28:30,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-10-05 22:28:32,956 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222832945983
2018-10-05 22:28:32,974 [salt.minion      :1431][INFO    ][20905] Starting a new job with PID 20905
2018-10-05 22:28:33,007 [salt.minion      :1708][INFO    ][20905] Returning information for job: 20181005222832945983
2018-10-05 22:28:43,135 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222843117526
2018-10-05 22:28:43,158 [salt.minion      :1431][INFO    ][24518] Starting a new job with PID 24518
2018-10-05 22:28:43,185 [salt.minion      :1708][INFO    ][24518] Returning information for job: 20181005222843117526
2018-10-05 22:28:47,514 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:28:47,579 [salt.state       :290 ][INFO    ][20452] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'c++-compiler' changed from 'absent' to '1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-137.163'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev' changed from 'absent' to '1'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'binutils-gold' changed from 'absent' to '1'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-10-05 22:28:47,622 [salt.state       :905 ][INFO    ][20452] Loading fresh modules for state activity
2018-10-05 22:28:47,883 [salt.state       :1941][INFO    ][20452] Completed state [aodh-api] at time 22:28:47.883060 duration_in_ms=21018.665
2018-10-05 22:28:47,891 [salt.state       :1770][INFO    ][20452] Running state [aodh-evaluator] at time 22:28:47.891537
2018-10-05 22:28:47,891 [salt.state       :1803][INFO    ][20452] Executing state pkg.installed for [aodh-evaluator]
2018-10-05 22:28:48,861 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:28:48,903 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-10-05 22:28:52,874 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:28:52,935 [salt.state       :290 ][INFO    ][20452] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-05 22:28:52,970 [salt.state       :905 ][INFO    ][20452] Loading fresh modules for state activity
2018-10-05 22:28:53,019 [salt.state       :1941][INFO    ][20452] Completed state [aodh-evaluator] at time 22:28:53.019813 duration_in_ms=5128.274
2018-10-05 22:28:53,027 [salt.state       :1770][INFO    ][20452] Running state [aodh-notifier] at time 22:28:53.027557
2018-10-05 22:28:53,028 [salt.state       :1803][INFO    ][20452] Executing state pkg.installed for [aodh-notifier]
2018-10-05 22:28:54,197 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222853292423
2018-10-05 22:28:54,220 [salt.minion      :1431][INFO    ][26353] Starting a new job with PID 26353
2018-10-05 22:28:54,244 [salt.minion      :1708][INFO    ][26353] Returning information for job: 20181005222853292423
2018-10-05 22:28:54,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:28:54,399 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-10-05 22:28:58,378 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:28:58,445 [salt.state       :290 ][INFO    ][20452] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-05 22:28:58,486 [salt.state       :905 ][INFO    ][20452] Loading fresh modules for state activity
2018-10-05 22:28:58,545 [salt.state       :1941][INFO    ][20452] Completed state [aodh-notifier] at time 22:28:58.545205 duration_in_ms=5517.647
2018-10-05 22:28:58,554 [salt.state       :1770][INFO    ][20452] Running state [aodh-listener] at time 22:28:58.554206
2018-10-05 22:28:58,554 [salt.state       :1803][INFO    ][20452] Executing state pkg.installed for [aodh-listener]
2018-10-05 22:28:59,697 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:28:59,747 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-10-05 22:29:03,492 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222903480241
2018-10-05 22:29:03,540 [salt.minion      :1431][INFO    ][26894] Starting a new job with PID 26894
2018-10-05 22:29:03,616 [salt.minion      :1708][INFO    ][26894] Returning information for job: 20181005222903480241
2018-10-05 22:29:04,500 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:29:04,561 [salt.state       :290 ][INFO    ][20452] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-05 22:29:04,597 [salt.state       :905 ][INFO    ][20452] Loading fresh modules for state activity
2018-10-05 22:29:04,662 [salt.state       :1941][INFO    ][20452] Completed state [aodh-listener] at time 22:29:04.662300 duration_in_ms=6108.093
2018-10-05 22:29:04,682 [salt.state       :1770][INFO    ][20452] Running state [python-aodhclient] at time 22:29:04.682467
2018-10-05 22:29:04,682 [salt.state       :1803][INFO    ][20452] Executing state pkg.installed for [python-aodhclient]
2018-10-05 22:29:05,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:29:05,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-10-05 22:29:08,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:29:08,607 [salt.state       :290 ][INFO    ][20452] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-10-05 22:29:08,653 [salt.state       :905 ][INFO    ][20452] Loading fresh modules for state activity
2018-10-05 22:29:08,710 [salt.state       :1941][INFO    ][20452] Completed state [python-aodhclient] at time 22:29:08.709943 duration_in_ms=4027.474
2018-10-05 22:29:08,714 [salt.state       :1770][INFO    ][20452] Running state [aodh_ssl_mysql] at time 22:29:08.714370
2018-10-05 22:29:08,714 [salt.state       :1803][INFO    ][20452] Executing state test.show_notification for [aodh_ssl_mysql]
2018-10-05 22:29:08,715 [salt.state       :290 ][INFO    ][20452] Running aodh._ssl.mysql
2018-10-05 22:29:08,716 [salt.state       :1941][INFO    ][20452] Completed state [aodh_ssl_mysql] at time 22:29:08.716403 duration_in_ms=2.033
2018-10-05 22:29:08,717 [salt.state       :1770][INFO    ][20452] Running state [aodh_ssl_rabbitmq] at time 22:29:08.717051
2018-10-05 22:29:08,717 [salt.state       :1803][INFO    ][20452] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-10-05 22:29:08,718 [salt.state       :290 ][INFO    ][20452] Running aodh._ssl.rabbitmq
2018-10-05 22:29:08,719 [salt.state       :1941][INFO    ][20452] Completed state [aodh_ssl_rabbitmq] at time 22:29:08.718924 duration_in_ms=1.873
2018-10-05 22:29:08,724 [salt.state       :1770][INFO    ][20452] Running state [/etc/aodh/aodh.conf] at time 22:29:08.724016
2018-10-05 22:29:08,725 [salt.state       :1803][INFO    ][20452] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-10-05 22:29:08,768 [salt.fileclient  :1215][INFO    ][20452] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-10-05 22:29:08,851 [salt.fileclient  :1215][INFO    ][20452] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-10-05 22:29:08,990 [salt.fileclient  :1215][INFO    ][20452] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-10-05 22:29:09,012 [salt.fileclient  :1215][INFO    ][20452] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-10-05 22:29:09,060 [salt.state       :290 ][INFO    ][20452] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.32
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,291 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +862,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +878,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +916,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -775,995 +1034,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-10-05 22:29:09,069 [salt.state       :1941][INFO    ][20452] Completed state [/etc/aodh/aodh.conf] at time 22:29:09.069722 duration_in_ms=345.706
2018-10-05 22:29:09,070 [salt.state       :1770][INFO    ][20452] Running state [/etc/default/aodh-evaluator] at time 22:29:09.070199
2018-10-05 22:29:09,070 [salt.state       :1803][INFO    ][20452] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-10-05 22:29:09,098 [salt.fileclient  :1215][INFO    ][20452] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-10-05 22:29:09,143 [salt.state       :290 ][INFO    ][20452] File changed:
New file
2018-10-05 22:29:09,144 [salt.state       :1941][INFO    ][20452] Completed state [/etc/default/aodh-evaluator] at time 22:29:09.143512 duration_in_ms=73.313
2018-10-05 22:29:09,145 [salt.state       :1770][INFO    ][20452] Running state [/etc/default/aodh-notifier] at time 22:29:09.145216
2018-10-05 22:29:09,157 [salt.state       :1803][INFO    ][20452] Executing state file.managed for [/etc/default/aodh-notifier]
2018-10-05 22:29:09,189 [salt.state       :290 ][INFO    ][20452] File changed:
New file
2018-10-05 22:29:09,189 [salt.state       :1941][INFO    ][20452] Completed state [/etc/default/aodh-notifier] at time 22:29:09.189276 duration_in_ms=44.06
2018-10-05 22:29:09,189 [salt.state       :1770][INFO    ][20452] Running state [/etc/default/aodh-listener] at time 22:29:09.189725
2018-10-05 22:29:09,189 [salt.state       :1803][INFO    ][20452] Executing state file.managed for [/etc/default/aodh-listener]
2018-10-05 22:29:09,220 [salt.state       :290 ][INFO    ][20452] File changed:
New file
2018-10-05 22:29:09,221 [salt.state       :1941][INFO    ][20452] Completed state [/etc/default/aodh-listener] at time 22:29:09.221021 duration_in_ms=31.296
2018-10-05 22:29:09,227 [salt.state       :1770][INFO    ][20452] Running state [aodh-dbsync] at time 22:29:09.227091
2018-10-05 22:29:09,227 [salt.state       :1803][INFO    ][20452] Executing state cmd.run for [aodh-dbsync]
2018-10-05 22:29:09,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command 'aodh-dbsync' in directory '/root'
2018-10-05 22:29:12,201 [salt.state       :290 ][INFO    ][20452] {'pid': 27076, 'retcode': 0, 'stderr': '', 'stdout': '2018-10-05 22:29:12.034 27077 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-10-05 22:29:12.034 27077 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-10-05 22:29:12,203 [salt.state       :1941][INFO    ][20452] Completed state [aodh-dbsync] at time 22:29:12.203327 duration_in_ms=2976.235
2018-10-05 22:29:12,214 [salt.state       :1770][INFO    ][20452] Running state [/usr/bin/aodh-expirer] at time 22:29:12.214510
2018-10-05 22:29:12,214 [salt.state       :1803][INFO    ][20452] Executing state cron.present for [/usr/bin/aodh-expirer]
2018-10-05 22:29:12,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command 'crontab -u aodh -l' in directory '/root'
2018-10-05 22:29:12,238 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][20452] Command '['crontab', '-u', 'aodh', '-l']' failed with return code: 1
2018-10-05 22:29:12,239 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][20452] stderr: no crontab for aodh

2018-10-05 22:29:12,239 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][20452] retcode: 1
2018-10-05 22:29:12,242 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command 'crontab -u aodh /tmp/__salt.tmp.OhXh2K' in directory '/root'
2018-10-05 22:29:12,269 [salt.state       :290 ][INFO    ][20452] {'aodh': '/usr/bin/aodh-expirer'}
2018-10-05 22:29:12,270 [salt.state       :1941][INFO    ][20452] Completed state [/usr/bin/aodh-expirer] at time 22:29:12.270122 duration_in_ms=55.612
2018-10-05 22:29:12,271 [salt.state       :1770][INFO    ][20452] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 22:29:12.271150
2018-10-05 22:29:12,271 [salt.state       :1803][INFO    ][20452] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-10-05 22:29:12,306 [salt.fileclient  :1215][INFO    ][20452] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-10-05 22:29:12,360 [salt.state       :290 ][INFO    ][20452] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.32:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-10-05 22:29:12,360 [salt.state       :1941][INFO    ][20452] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 22:29:12.360642 duration_in_ms=89.493
2018-10-05 22:29:12,360 [salt.state       :1770][INFO    ][20452] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 22:29:12.360897
2018-10-05 22:29:12,361 [salt.state       :1803][INFO    ][20452] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-10-05 22:29:12,373 [salt.state       :290 ][INFO    ][20452] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-10-05 22:29:12,373 [salt.state       :1941][INFO    ][20452] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 22:29:12.373809 duration_in_ms=12.912
2018-10-05 22:29:13,107 [salt.state       :1770][INFO    ][20452] Running state [apache2] at time 22:29:13.107455
2018-10-05 22:29:13,107 [salt.state       :1803][INFO    ][20452] Executing state service.running for [apache2]
2018-10-05 22:29:13,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-05 22:29:13,141 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-05 22:29:13,166 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-05 22:29:13,196 [salt.state       :290 ][INFO    ][20452] The service apache2 is already running
2018-10-05 22:29:13,198 [salt.state       :1941][INFO    ][20452] Completed state [apache2] at time 22:29:13.197192 duration_in_ms=89.737
2018-10-05 22:29:13,198 [salt.state       :1770][INFO    ][20452] Running state [apache2] at time 22:29:13.198541
2018-10-05 22:29:13,199 [salt.state       :1803][INFO    ][20452] Executing state service.mod_watch for [apache2]
2018-10-05 22:29:13,200 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-05 22:29:13,227 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-05 22:29:13,531 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222913521062
2018-10-05 22:29:13,552 [salt.minion      :1431][INFO    ][27135] Starting a new job with PID 27135
2018-10-05 22:29:13,575 [salt.minion      :1708][INFO    ][27135] Returning information for job: 20181005222913521062
2018-10-05 22:29:15,644 [salt.state       :290 ][INFO    ][20452] {'apache2': True}
2018-10-05 22:29:15,645 [salt.state       :1941][INFO    ][20452] Completed state [apache2] at time 22:29:15.645417 duration_in_ms=2446.876
2018-10-05 22:29:15,647 [salt.state       :1770][INFO    ][20452] Running state [aodh-evaluator] at time 22:29:15.647781
2018-10-05 22:29:15,648 [salt.state       :1803][INFO    ][20452] Executing state service.running for [aodh-evaluator]
2018-10-05 22:29:15,650 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-10-05 22:29:15,690 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-05 22:29:15,711 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-10-05 22:29:15,733 [salt.state       :290 ][INFO    ][20452] The service aodh-evaluator is already running
2018-10-05 22:29:15,734 [salt.state       :1941][INFO    ][20452] Completed state [aodh-evaluator] at time 22:29:15.734099 duration_in_ms=86.318
2018-10-05 22:29:15,734 [salt.state       :1770][INFO    ][20452] Running state [aodh-evaluator] at time 22:29:15.734557
2018-10-05 22:29:15,735 [salt.state       :1803][INFO    ][20452] Executing state service.mod_watch for [aodh-evaluator]
2018-10-05 22:29:15,736 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-05 22:29:15,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-10-05 22:29:15,952 [salt.state       :290 ][INFO    ][20452] {'aodh-evaluator': True}
2018-10-05 22:29:15,955 [salt.state       :1941][INFO    ][20452] Completed state [aodh-evaluator] at time 22:29:15.953354 duration_in_ms=218.796
2018-10-05 22:29:15,957 [salt.state       :1770][INFO    ][20452] Running state [aodh-notifier] at time 22:29:15.957010
2018-10-05 22:29:15,957 [salt.state       :1803][INFO    ][20452] Executing state service.running for [aodh-notifier]
2018-10-05 22:29:15,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-10-05 22:29:16,013 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-05 22:29:16,035 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-10-05 22:29:16,075 [salt.state       :290 ][INFO    ][20452] The service aodh-notifier is already running
2018-10-05 22:29:16,075 [salt.state       :1941][INFO    ][20452] Completed state [aodh-notifier] at time 22:29:16.075501 duration_in_ms=118.491
2018-10-05 22:29:16,075 [salt.state       :1770][INFO    ][20452] Running state [aodh-notifier] at time 22:29:16.075817
2018-10-05 22:29:16,076 [salt.state       :1803][INFO    ][20452] Executing state service.mod_watch for [aodh-notifier]
2018-10-05 22:29:16,077 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-05 22:29:16,123 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-10-05 22:29:23,688 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222923671286
2018-10-05 22:29:23,710 [salt.minion      :1431][INFO    ][27364] Starting a new job with PID 27364
2018-10-05 22:29:23,741 [salt.minion      :1708][INFO    ][27364] Returning information for job: 20181005222923671286
2018-10-05 22:29:31,427 [salt.state       :290 ][INFO    ][20452] {'aodh-notifier': True}
2018-10-05 22:29:31,427 [salt.state       :1941][INFO    ][20452] Completed state [aodh-notifier] at time 22:29:31.427470 duration_in_ms=15351.653
2018-10-05 22:29:31,431 [salt.state       :1770][INFO    ][20452] Running state [aodh-listener] at time 22:29:31.430959
2018-10-05 22:29:31,431 [salt.state       :1803][INFO    ][20452] Executing state service.running for [aodh-listener]
2018-10-05 22:29:31,432 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-10-05 22:29:31,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-05 22:29:31,488 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-10-05 22:29:31,510 [salt.state       :290 ][INFO    ][20452] The service aodh-listener is already running
2018-10-05 22:29:31,511 [salt.state       :1941][INFO    ][20452] Completed state [aodh-listener] at time 22:29:31.511218 duration_in_ms=80.258
2018-10-05 22:29:31,511 [salt.state       :1770][INFO    ][20452] Running state [aodh-listener] at time 22:29:31.511535
2018-10-05 22:29:31,511 [salt.state       :1803][INFO    ][20452] Executing state service.mod_watch for [aodh-listener]
2018-10-05 22:29:31,514 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-05 22:29:31,539 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20452] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-10-05 22:29:33,865 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222933853302
2018-10-05 22:29:33,892 [salt.minion      :1431][INFO    ][27443] Starting a new job with PID 27443
2018-10-05 22:29:33,920 [salt.minion      :1708][INFO    ][27443] Returning information for job: 20181005222933853302
2018-10-05 22:29:44,057 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005222944039346
2018-10-05 22:29:44,080 [salt.minion      :1431][INFO    ][27450] Starting a new job with PID 27450
2018-10-05 22:29:44,107 [salt.minion      :1708][INFO    ][27450] Returning information for job: 20181005222944039346
2018-10-05 22:29:46,672 [salt.state       :290 ][INFO    ][20452] {'aodh-listener': True}
2018-10-05 22:29:46,673 [salt.state       :1941][INFO    ][20452] Completed state [aodh-listener] at time 22:29:46.672898 duration_in_ms=15161.362
2018-10-05 22:29:46,683 [salt.minion      :1708][INFO    ][20452] Returning information for job: 20181005222817802663
2018-10-05 22:31:19,311 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command state.sls with jid 20181005223119300834
2018-10-05 22:31:19,337 [salt.minion      :1431][INFO    ][27508] Starting a new job with PID 27508
2018-10-05 22:31:24,426 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005223124410002
2018-10-05 22:31:24,450 [salt.minion      :1431][INFO    ][27513] Starting a new job with PID 27513
2018-10-05 22:31:24,477 [salt.minion      :1708][INFO    ][27513] Returning information for job: 20181005223124410002
2018-10-05 22:31:26,385 [salt.state       :905 ][INFO    ][27508] Loading fresh modules for state activity
2018-10-05 22:31:26,457 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-10-05 22:31:26,504 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-10-05 22:31:28,771 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-central] at time 22:31:28.771229
2018-10-05 22:31:28,772 [salt.state       :1803][INFO    ][27508] Executing state pkg.installed for [ceilometer-agent-central]
2018-10-05 22:31:28,773 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:31:29,447 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-10-05 22:31:29,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-05 22:31:32,072 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:31:32,118 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-10-05 22:31:34,522 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005223134506697
2018-10-05 22:31:34,549 [salt.minion      :1431][INFO    ][27943] Starting a new job with PID 27943
2018-10-05 22:31:34,575 [salt.minion      :1708][INFO    ][27943] Returning information for job: 20181005223134506697
2018-10-05 22:31:44,557 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005223144537086
2018-10-05 22:31:44,580 [salt.minion      :1431][INFO    ][28727] Starting a new job with PID 28727
2018-10-05 22:31:44,602 [salt.minion      :1708][INFO    ][28727] Returning information for job: 20181005223144537086
2018-10-05 22:31:54,585 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005223154568694
2018-10-05 22:31:54,609 [salt.minion      :1431][INFO    ][29827] Starting a new job with PID 29827
2018-10-05 22:31:54,641 [salt.minion      :1708][INFO    ][29827] Returning information for job: 20181005223154568694
2018-10-05 22:31:57,071 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:31:57,148 [salt.state       :290 ][INFO    ][27508] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'ibverbs-providers' changed from 'absent' to '17.1-1~cloud0'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmthca1' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0ubuntu2.1~cloud0'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libipathverbs1' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libmlx4-1' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libmlx5-1' changed from 'absent' to '1'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '17.1-1~cloud0'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libnes1' changed from 'absent' to '1'
'librados2' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'libcxgb3-1' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'librdmacm1' changed from 'absent' to '17.1-1~cloud0'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-10-05 22:31:57,198 [salt.state       :905 ][INFO    ][27508] Loading fresh modules for state activity
2018-10-05 22:31:57,493 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-central] at time 22:31:57.493306 duration_in_ms=28722.078
2018-10-05 22:31:57,502 [salt.state       :1770][INFO    ][27508] Running state [python-ceilometerclient] at time 22:31:57.502851
2018-10-05 22:31:57,503 [salt.state       :1803][INFO    ][27508] Executing state pkg.installed for [python-ceilometerclient]
2018-10-05 22:31:58,442 [salt.state       :290 ][INFO    ][27508] All specified packages are already installed
2018-10-05 22:31:58,443 [salt.state       :1941][INFO    ][27508] Completed state [python-ceilometerclient] at time 22:31:58.443254 duration_in_ms=940.402
2018-10-05 22:31:58,443 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-notification] at time 22:31:58.443609
2018-10-05 22:31:58,443 [salt.state       :1803][INFO    ][27508] Executing state pkg.installed for [ceilometer-agent-notification]
2018-10-05 22:31:58,480 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-05 22:31:58,527 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-10-05 22:32:02,937 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-05 22:32:03,081 [salt.state       :290 ][INFO    ][27508] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-10-05 22:32:03,162 [salt.state       :905 ][INFO    ][27508] Loading fresh modules for state activity
2018-10-05 22:32:03,214 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-notification] at time 22:32:03.214625 duration_in_ms=4771.016
2018-10-05 22:32:03,221 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/ceilometer.conf] at time 22:32:03.221513
2018-10-05 22:32:03,223 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-10-05 22:32:03,263 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-10-05 22:32:03,607 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-10-05 22:32:03,632 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-10-05 22:32:03,681 [salt.state       :290 ][INFO    ][27508] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-10-05 22:32:03,691 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/ceilometer.conf] at time 22:32:03.691177 duration_in_ms=469.663
2018-10-05 22:32:03,691 [salt.state       :1770][INFO    ][27508] Running state [/etc/default/ceilometer-agent-central] at time 22:32:03.691646
2018-10-05 22:32:03,691 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-10-05 22:32:03,734 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-10-05 22:32:03,779 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-05 22:32:03,779 [salt.state       :1941][INFO    ][27508] Completed state [/etc/default/ceilometer-agent-central] at time 22:32:03.779390 duration_in_ms=87.744
2018-10-05 22:32:03,779 [salt.state       :1770][INFO    ][27508] Running state [/etc/default/ceilometer-agent-notification] at time 22:32:03.779799
2018-10-05 22:32:03,780 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-10-05 22:32:03,840 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-05 22:32:03,840 [salt.state       :1941][INFO    ][27508] Completed state [/etc/default/ceilometer-agent-notification] at time 22:32:03.840254 duration_in_ms=60.454
2018-10-05 22:32:03,852 [salt.state       :1770][INFO    ][27508] Running state [python-gnocchiclient] at time 22:32:03.852053
2018-10-05 22:32:03,852 [salt.state       :1803][INFO    ][27508] Executing state pkg.latest for [python-gnocchiclient]
2018-10-05 22:32:03,883 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-10-05 22:32:04,434 [salt.state       :290 ][INFO    ][27508] Package python-gnocchiclient is already up-to-date
2018-10-05 22:32:04,434 [salt.state       :1941][INFO    ][27508] Completed state [python-gnocchiclient] at time 22:32:04.434795 duration_in_ms=582.742
2018-10-05 22:32:04,436 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 22:32:04.436287
2018-10-05 22:32:04,436 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2018-10-05 22:32:04,463 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gnocchi_resources.yaml'
2018-10-05 22:32:04,504 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-05 22:32:04,506 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 22:32:04.504614 duration_in_ms=68.327
2018-10-05 22:32:04,508 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-upgrade] at time 22:32:04.508549
2018-10-05 22:32:04,514 [salt.state       :1803][INFO    ][27508] Executing state cmd.run for [ceilometer-upgrade]
2018-10-05 22:32:04,515 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command 'ceilometer-upgrade' in directory '/root'
2018-10-05 22:32:05,128 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005223204665182
2018-10-05 22:32:05,181 [salt.minion      :1431][INFO    ][30340] Starting a new job with PID 30340
2018-10-05 22:32:05,237 [salt.minion      :1708][INFO    ][30340] Returning information for job: 20181005223204665182
2018-10-05 22:32:14,803 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005223214789335
2018-10-05 22:32:14,832 [salt.minion      :1431][INFO    ][30358] Starting a new job with PID 30358
2018-10-05 22:32:14,864 [salt.minion      :1708][INFO    ][30358] Returning information for job: 20181005223214789335
2018-10-05 22:32:23,753 [salt.state       :290 ][INFO    ][27508] {'pid': 30335, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-05 22:32:23,755 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-upgrade] at time 22:32:23.755574 duration_in_ms=19247.023
2018-10-05 22:32:23,761 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/pipeline.yaml] at time 22:32:23.761439
2018-10-05 22:32:23,763 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-10-05 22:32:23,802 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-10-05 22:32:23,914 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-05 22:32:23,915 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/pipeline.yaml] at time 22:32:23.915504 duration_in_ms=154.065
2018-10-05 22:32:23,915 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/event_pipeline.yaml] at time 22:32:23.915932
2018-10-05 22:32:23,916 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-10-05 22:32:23,942 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-10-05 22:32:24,047 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-05 22:32:24,048 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 22:32:24.048304 duration_in_ms=132.372
2018-10-05 22:32:24,049 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/event_definitions.yaml] at time 22:32:24.049247
2018-10-05 22:32:24,049 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-10-05 22:32:24,080 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-10-05 22:32:24,103 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-05 22:32:24,103 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/event_definitions.yaml] at time 22:32:24.103468 duration_in_ms=54.22
2018-10-05 22:32:24,103 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 22:32:24.103874
2018-10-05 22:32:24,104 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-10-05 22:32:24,130 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-10-05 22:32:24,147 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-05 22:32:24,148 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 22:32:24.148159 duration_in_ms=44.285
2018-10-05 22:32:24,852 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command saltutil.find_job with jid 20181005223224833144
2018-10-05 22:32:24,878 [salt.minion      :1431][INFO    ][30372] Starting a new job with PID 30372
2018-10-05 22:32:24,903 [salt.minion      :1708][INFO    ][30372] Returning information for job: 20181005223224833144
2018-10-05 22:32:24,912 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-central] at time 22:32:24.912657
2018-10-05 22:32:24,913 [salt.state       :1803][INFO    ][27508] Executing state service.running for [ceilometer-agent-central]
2018-10-05 22:32:24,915 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-10-05 22:32:24,954 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-05 22:32:24,984 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-05 22:32:25,011 [salt.state       :290 ][INFO    ][27508] The service ceilometer-agent-central is already running
2018-10-05 22:32:25,013 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-central] at time 22:32:25.013540 duration_in_ms=100.883
2018-10-05 22:32:25,014 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-central] at time 22:32:25.014061
2018-10-05 22:32:25,015 [salt.state       :1803][INFO    ][27508] Executing state service.mod_watch for [ceilometer-agent-central]
2018-10-05 22:32:25,017 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-05 22:32:25,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-05 22:32:25,340 [salt.state       :290 ][INFO    ][27508] {'ceilometer-agent-central': True}
2018-10-05 22:32:25,341 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-central] at time 22:32:25.341273 duration_in_ms=327.212
2018-10-05 22:32:25,351 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-notification] at time 22:32:25.351325
2018-10-05 22:32:25,351 [salt.state       :1803][INFO    ][27508] Executing state service.running for [ceilometer-agent-notification]
2018-10-05 22:32:25,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-10-05 22:32:25,388 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-05 22:32:25,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-05 22:32:25,443 [salt.state       :290 ][INFO    ][27508] The service ceilometer-agent-notification is already running
2018-10-05 22:32:25,443 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-notification] at time 22:32:25.443428 duration_in_ms=92.102
2018-10-05 22:32:25,443 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-notification] at time 22:32:25.443757
2018-10-05 22:32:25,444 [salt.state       :1803][INFO    ][27508] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-10-05 22:32:25,445 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-05 22:32:25,472 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-05 22:32:25,693 [salt.state       :290 ][INFO    ][27508] {'ceilometer-agent-notification': True}
2018-10-05 22:32:25,695 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-notification] at time 22:32:25.695872 duration_in_ms=252.115
2018-10-05 22:32:25,700 [salt.minion      :1708][INFO    ][27508] Returning information for job: 20181005223119300834
2018-10-05 22:38:27,770 [salt.minion      :1307][INFO    ][2970] User sudo_ubuntu Executing command cp.push_dir with jid 20181005223827754561
2018-10-05 22:38:27,806 [salt.minion      :1431][INFO    ][30538] Starting a new job with PID 30538
