2018-10-03 21:05:47,478 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:47,612 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:47,616 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:47,619 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:47,623 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:47,964 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:47,968 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:47,971 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,036 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,040 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,044 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,047 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,152 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,285 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,289 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,295 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,299 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,303 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,307 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,311 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,315 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,319 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,324 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,326 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,329 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,335 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,338 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,345 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,349 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,356 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,359 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,365 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,368 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,374 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,377 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,382 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,386 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,391 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,394 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,398 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,403 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,407 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,411 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,415 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,417 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,422 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,425 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,428 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,433 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,436 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,441 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,445 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,449 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,453 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,456 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,461 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:05:48,464 [salt.utils.decorators:82  ][ERROR   ][1788] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 21:06:11,517 [salt.utils.decorators:613 ][WARNING ][1788] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-03 21:06:14,786 [salt.loaded.int.states.file:2150][WARNING ][1788] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-03 21:06:16,088 [salt.loaded.int.states.file:2150][WARNING ][1788] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-03 21:06:38,708 [salt.state       :292 ][ERROR   ][1788] An exception occurred in this state: Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/salt/state.py", line 1879, in call
    **cdata['kwargs'])
  File "/usr/lib/python2.7/dist-packages/salt/loader.py", line 1826, in wrapper
    return f(*args, **kwargs)
  File "/usr/lib/python2.7/dist-packages/salt/states/x509.py", line 494, in certificate_managed
    new = __salt__['x509.create_certificate'](testrun=True, **kwargs)
  File "/usr/lib/python2.7/dist-packages/salt/modules/x509.py", line 1387, in create_certificate
    'ca_server did not respond'
SaltInvocationError: ca_server did not respond salt master must permit peers to call the sign_remote_certificate function.

2018-10-03 21:07:39,445 [salt.loaded.int.states.file:2150][WARNING ][1788] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-03 21:07:42,894 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-10-03 21:07:42,929 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-10-03 21:07:42,954 [salt.utils.parsers:1051][WARNING ][1436] Minion received a SIGTERM. Exiting.
2018-10-03 21:07:43,797 [salt.cli.daemons :293 ][INFO    ][3092] Setting up the Salt Minion "mdb02.mcp-ovs-ha.local"
2018-10-03 21:07:43,898 [salt.cli.daemons :82  ][INFO    ][3092] Starting up the Salt Minion
2018-10-03 21:07:43,898 [salt.utils.event :1017][INFO    ][3092] Starting pull socket on /var/run/salt/minion/minion_event_bf023920e8_pull.ipc
2018-10-03 21:07:44,668 [salt.minion      :976 ][INFO    ][3092] Creating minion process manager
2018-10-03 21:07:46,148 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3092] Executing command ['date', '+%z'] in directory '/root'
2018-10-03 21:07:46,170 [salt.utils.schedule:568 ][INFO    ][3092] Updating job settings for scheduled job: __mine_interval
2018-10-03 21:07:46,171 [salt.minion      :1107][INFO    ][3092] Added mine.update to scheduler
2018-10-03 21:07:46,177 [salt.minion      :1965][INFO    ][3092] Minion is starting as user 'root'
2018-10-03 21:07:46,189 [salt.minion      :2324][INFO    ][3092] Minion is ready to receive requests!
2018-10-03 21:08:01,897 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.apply with jid 20181003210801884730
2018-10-03 21:08:01,918 [salt.minion      :1431][INFO    ][3186] Starting a new job with PID 3186
2018-10-03 21:08:07,011 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003210807001300
2018-10-03 21:08:07,035 [salt.minion      :1431][INFO    ][3191] Starting a new job with PID 3191
2018-10-03 21:08:07,059 [salt.minion      :1708][INFO    ][3191] Returning information for job: 20181003210807001300
2018-10-03 21:08:10,307 [salt.state       :905 ][INFO    ][3186] Loading fresh modules for state activity
2018-10-03 21:08:13,596 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-10-03 21:08:13,647 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-10-03 21:08:13,797 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-10-03 21:08:13,917 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-10-03 21:08:14,036 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-10-03 21:08:14,233 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-10-03 21:08:14,361 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-10-03 21:08:15,237 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-10-03 21:08:15,391 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-10-03 21:08:15,419 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-10-03 21:08:15,532 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-10-03 21:08:15,651 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-10-03 21:08:15,767 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-10-03 21:08:15,912 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-10-03 21:08:16,033 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-10-03 21:08:16,143 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-10-03 21:08:16,259 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-10-03 21:08:16,379 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-10-03 21:08:16,496 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-10-03 21:08:16,616 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-10-03 21:08:17,197 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003210817182344
2018-10-03 21:08:17,219 [salt.minion      :1431][INFO    ][3238] Starting a new job with PID 3238
2018-10-03 21:08:17,241 [salt.minion      :1708][INFO    ][3238] Returning information for job: 20181003210817182344
2018-10-03 21:08:17,450 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-10-03 21:08:17,636 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-10-03 21:08:17,883 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-10-03 21:08:17,998 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-10-03 21:08:18,122 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-10-03 21:08:18,146 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-10-03 21:08:18,198 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-10-03 21:08:18,261 [salt.state       :1770][INFO    ][3186] Running state [/etc/environment] at time 21:08:18.261120
2018-10-03 21:08:18,261 [salt.state       :1803][INFO    ][3186] Executing state file.blockreplace for [/etc/environment]
2018-10-03 21:08:18,268 [salt.state       :290 ][INFO    ][3186] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-10-03 21:08:18,269 [salt.state       :1941][INFO    ][3186] Completed state [/etc/environment] at time 21:08:18.269071 duration_in_ms=7.952
2018-10-03 21:08:18,269 [salt.state       :1770][INFO    ][3186] Running state [/etc/profile.d] at time 21:08:18.269278
2018-10-03 21:08:18,269 [salt.state       :1803][INFO    ][3186] Executing state file.directory for [/etc/profile.d]
2018-10-03 21:08:18,271 [salt.state       :290 ][INFO    ][3186] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-10-03 21:08:18,271 [salt.state       :1941][INFO    ][3186] Completed state [/etc/profile.d] at time 21:08:18.271625 duration_in_ms=2.347
2018-10-03 21:08:18,941 [salt.state       :1770][INFO    ][3186] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 21:08:18.941083
2018-10-03 21:08:18,941 [salt.state       :1803][INFO    ][3186] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-10-03 21:08:19,688 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-10-03 21:08:19,715 [salt.state       :290 ][INFO    ][3186] File changed:
New file
2018-10-03 21:08:19,715 [salt.state       :1941][INFO    ][3186] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 21:08:19.715483 duration_in_ms=774.401
2018-10-03 21:08:19,715 [salt.state       :1770][INFO    ][3186] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 21:08:19.715762
2018-10-03 21:08:19,715 [salt.state       :1803][INFO    ][3186] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-10-03 21:08:19,747 [salt.state       :290 ][INFO    ][3186] File changed:
New file
2018-10-03 21:08:19,748 [salt.state       :1941][INFO    ][3186] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 21:08:19.748509 duration_in_ms=32.746
2018-10-03 21:08:19,750 [salt.state       :1770][INFO    ][3186] Running state [linux_repo_prereq_pkgs] at time 21:08:19.750291
2018-10-03 21:08:19,750 [salt.state       :1803][INFO    ][3186] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-10-03 21:08:19,751 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:08:20,161 [salt.state       :290 ][INFO    ][3186] All specified packages are already installed
2018-10-03 21:08:20,162 [salt.state       :1941][INFO    ][3186] Completed state [linux_repo_prereq_pkgs] at time 21:08:20.162526 duration_in_ms=412.235
2018-10-03 21:08:20,162 [salt.state       :1770][INFO    ][3186] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 21:08:20.162891
2018-10-03 21:08:20,163 [salt.state       :1803][INFO    ][3186] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-10-03 21:08:20,163 [salt.state       :290 ][INFO    ][3186] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-10-03 21:08:20,163 [salt.state       :1941][INFO    ][3186] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 21:08:20.163913 duration_in_ms=1.022
2018-10-03 21:08:20,164 [salt.state       :1770][INFO    ][3186] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 21:08:20.164137
2018-10-03 21:08:20,164 [salt.state       :1803][INFO    ][3186] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-10-03 21:08:20,164 [salt.state       :290 ][INFO    ][3186] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-10-03 21:08:20,164 [salt.state       :1941][INFO    ][3186] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 21:08:20.164803 duration_in_ms=0.665
2018-10-03 21:08:20,165 [salt.state       :1770][INFO    ][3186] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 21:08:20.165024
2018-10-03 21:08:20,165 [salt.state       :1803][INFO    ][3186] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-10-03 21:08:20,192 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-10-03 21:08:20,330 [salt.state       :290 ][INFO    ][3186] File changed:
New file
2018-10-03 21:08:20,330 [salt.state       :1941][INFO    ][3186] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 21:08:20.330237 duration_in_ms=165.213
2018-10-03 21:08:20,333 [salt.state       :1770][INFO    ][3186] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 21:08:20.333912
2018-10-03 21:08:20,334 [salt.state       :1803][INFO    ][3186] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-10-03 21:08:20,694 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-10-03 21:08:21,040 [salt.state       :290 ][INFO    ][3186] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-10-03 21:08:21,041 [salt.state       :1941][INFO    ][3186] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 21:08:21.041155 duration_in_ms=707.243
2018-10-03 21:08:21,041 [salt.state       :1770][INFO    ][3186] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 21:08:21.041467
2018-10-03 21:08:21,041 [salt.state       :1803][INFO    ][3186] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-10-03 21:08:21,042 [salt.state       :290 ][INFO    ][3186] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-10-03 21:08:21,042 [salt.state       :1941][INFO    ][3186] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 21:08:21.042739 duration_in_ms=1.272
2018-10-03 21:08:21,042 [salt.state       :1770][INFO    ][3186] Running state [/etc/apt/preferences.d/uca] at time 21:08:21.042950
2018-10-03 21:08:21,043 [salt.state       :1803][INFO    ][3186] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-10-03 21:08:21,172 [salt.state       :290 ][INFO    ][3186] File changed:
New file
2018-10-03 21:08:21,172 [salt.state       :1941][INFO    ][3186] Completed state [/etc/apt/preferences.d/uca] at time 21:08:21.172435 duration_in_ms=129.485
2018-10-03 21:08:21,173 [salt.state       :1770][INFO    ][3186] Running state [echo 'LS0tLS1CRUdJTiBQR1AgUFVCTElDIEtFWSBCTE9DSy0tLS0tClZlcnNpb246IEdudVBHIHYxCgptUUlOQkZBcVNsZ0JFQURQS3dYVXdxYmdvRFlnUjIwekZ5cHhTWmxTYnJ0dE9LVlBFTWIwSFNVeDlXajhWdk5DCnIrbVQ0RTl3QXlxN05USXM1YWQyY1VoWG95ZW5yamNmR3FLNms5UjZ5UkhEYnZBeENTV1RuSmp3N216c2FqRE4Kb2NYQzZUSEtWVzhCU2pyaDBhT0JMcGh0NmQ1UUNPMnZ5V3h3NjVGS002NUdPc2JYMDNabmdVUE11T3VpT0VIUQpabzk3VlNIMnBTQitMK0IzZDlCMG53M1FuVThxWk1uZStuVldZTFlSWGhDSXhTdjEvaDM5U1h6SFJnSm9SVUZICnZMMmFpaVZybjg4TmpxZkRXMTVIRmhWSmNHT0Z1QUNablJBMC9FcVRxMHFObzNHemlRTzRteHVaaTNiVFZMNXMKR0FCaVlXOXVJbG9rUHFjUzdGYTBGUlZJVTlSK2JCZEhab21wY1luS0FlR2FnK3VSdnVUcUMzTU1SY0xVUzlPaQovUDlJOGZQQVJYVVB3ellOM2ZhZ0NHQjhmZllWcU11bm5GczBMNnRkMDhCZ3ZXd2VyK0J1dTRmUEdzUTVPek1jCmxnWjBUSm1YeU9sSVc0OWxjMVVYbk9ScDRzbTdIUzZva0E3UDZVUmJxeUdiYXBsU3NOVVZUZ1ZiaSt2YzgvalkKZGZFeHQvM0h4VnFnclBscTlodHFZZ3doWXZHSWJCQXhtZUZRRDhBay9TaFNpV2IxRmRRK2Y3THR5KzRtWkxmTgo4eDR6UFovLzdmRDVkL1BFVFBoOVAwbXNGK2xMRmxQNTY0KzFqNzV3eCtza0ZPNHYxZ0dsQmNEYWVpcGtGemVvCnpuZEFncGVneWRLU05URjRRSzlpVFlvYlRJd3NZZkd1UzhyVjIxekUyc2FMTTBDRTNUOTBhSFlCL3dBUkFRQUIKdEQxRFlXNXZibWxqWVd3Z1EyeHZkV1FnUVhKamFHbDJaU0JUYVdkdWFXNW5JRXRsZVNBOFpuUndiV0Z6ZEdWeQpRR05oYm05dWFXTmhiQzVqYjIwK2lRSTNCQk1CQ0FBaEJRSlFLa3BZQWhzREJRc0pDQWNEQlJVS0NRZ0xCUllDCkF3RUFBaDRCQWhlQUFBb0pFRjdiRzJMc1NTYnFLeGtRQUlLdGdJbXJrMDJZQ0RsZGc2dEx0M2I2OVpLMGtJVkkKM1hzby96Q0JaYnJZRm1nR1FFRkhBYTU4bUlncHY1R2NnSEh4V2pwWDNuNHR1MlJNOUVuZUt2RmpGQnN0VFRnbwp5dUNnRnI3aWJsdnMvYU1XNGpGSkFpSWJtampYV1ZjMENWQi9KbExxekJKL01sSGRSOU9XbW9qTjlaem9JQStpCit0V2x5cGdVb3Q4aUl4a1I2SkVOeGl0NXY5ZE44aTZhbm1uV3liUTZQWEZNdU5pNkd6UTBKZ1pJVnMzN24wa3MKMndoME44aEJqQUt1VWdxdTRNUE13dk50ejhGeEV6eUt3TE5TTW5qTEFoem1sL29qZS9OajFHQkI4cm9qNWRtdwo3UFN1bDVwQXFRNUtUYVh6bDZnSk41dk1FWnpPNHRFb0d0UnBBMC9HVFNYSWxjeC9TR2tVSzUrbHFkUUlNZHlTCm44YkltVTZWNnJEU29PYUk5WVdIWnRwdjVXZVVzTlRkZjY4alpzRkNSRCsyK05FbUlxQlZtMTF5aG1Vb2FzQzYKZFl3NWw5UC9QQmR3bUZtNk5CVVNFd3hiK1JPZnBMMUlDYVprOUp5Kys2YWt4aFkvLytjWUVQTGluMDJyNDNaMwpvNVBpcXVqcnMxUjJIczdrWDg0Z0w1U2xCelRNNEVkK29iN0tWdFFIVGVmcGJPMzViUWxsa1BOcWZCc0M4QUlDCjh4dlRQMlM4RmljWU9QQVRFdWlSV3M3S24zMVRXQzJpd3N3UktFS1ZSbU4wZmRwdS9VUGRNaWt5b051OXN6QloKUnh2a1JBZXpoM1doZUo2TVc2Rm1nOWQrdVRGSm9oWnQ1cUhkcHhZYTRiZXVONG1lOExGMFRZemdmRWJGVDZiOQpENkl5VEZvVDBMZXF1UUlOQkZBcVNsZ0JFQURtTDNURXE1ZWpCWXJBKzY0em84Rll2Q0Y0Z3ppUGE1ckNJSkdaCi9nWlhRN3BtNXplay9sT2U5QzgwbWh4TldlTG1yV01rTU9XS0NlYURNRnBNQk9RaFpabVJkYWtPbkgveHhPNXgKK2ZSZE9PaHkrNUdUUkppd2t1R09WNnJCOWVZSjNVTjljYVAyaGZpcENNcEpqbGczai9Hd2t0amh1cWNCSFhoQQpITWh6eEVPSURFNWhtcERxWjA1MWY4TEdYbGQ5YVNMOFJjdG9ZRk04c2dhZlBWbUlDVENxMFdoMDNkcjVjMkpBCmdFWHkzdXNoWW0vOGkyV0ZteWxkbzd2YnRUZngzRHBtSmMvRU1wR0tWK0d4Y0kzL0VScVNrZGUwa1dsbWZQWmIKby81K2hScVNyeXFmUXRSS25GRVFnQXFBaFBJd1h3T2tqQ3BQbkROZnJrdnpWRXRsMi9CV1AvMS9TT3F6WGprOQpUSWIxUTdNSEFOZUZNclRDcHJ6UExYNklkQzR6THArTHBWOTFXMnp5Z1FKelBnV3FIL1ovV0ZINGdYY0JCcW1JCjhiRnBNUE9OWWM5LzY3QVdVQUJvMlZPQ29qZ3RRbWp4dUZuK3VHTnc5UHZ4SkFGM3lqbDc4MVBWTFV3M242NmQKd0hSbVlqNGhxeE5ETHl3aGhuTC9DQzdLVUR0Qm5VVS9DS24vMFhnbTlvejN0aHV4RzZpM0YzcFFncHA3TWVNbgp0S2hMRldSWG85QmllOHovYzBOVjRLNUhjcGJHYThRUHFvRHNlQjVXYU80eUdJQk90K25pek00RExySSt2MDd5ClhlM0ptN3pCU3BZU3JHYXJaR0s2OHFhbVMzWFB6TXNoUGRvWFh6MzNia1FyVFBwaXZHWVFWUlp1emQvUjZiKzYKSXVyVitRQVJBUUFCaVFJZkJCZ0JDQUFKQlFKUUtrcFlBaHNNQUFvSkVGN2JHMkxzU1NicTU5RVAvMVUzODE1Lwp5SFYzY2YvSmVIZ2g2V1MvT3kya1JIcC9rSnQzZXYvbC9xSXhmTUlweU0zdS9ENnNpT1JQVFVYSFBtM0FhWnJiCncwRURXQnlBM2pIUUV6bExJYnNER1pncm5sK214RnVId0MxeUV1VzN4cnpnanRHWkNKdXJlWi9CRDZ4ZlJ1UmMKbXZuZXRBWnYvejk4Vk4vb2ozcnZZaFVpNzFOQXBxU3ZNRXhwTkJHcmRPNmdRbEk1YXpoT3U4eEdOeTRPU2tlOApKNnBBc01VWEljRXdqVkVJdmV3SnVxQlcvM3JqM0hoMTR0bVdqUTdzaE5uWUJ1U0p3YkxlVVcyZThiVVJuZlhFClR4ckNtWHpEbVFsZEQ1R1FXQ2NENVdEb3NrL0hWSEJtSGxxcnF5MFZPMm5FM2M3M2RRbE5jSTRqVldlQzRiNFEKU3BZVnNGei82SXF5NVpRa0NPcFE1N01DZjBCNlA1bkY5MmM1ZjNUWVBNeEhmMHgzRHJqRGJVVlp5dHhEaVpaYQpYc2JaenNlamJiYzFiU05wNGhiK0lXaG1Xb0ZucS9oTkhYektQSEJUYXBPYm5RanUrOXpVbFFuZ1YwQmxQVDYyCmhPSE93M1B2N3N1T3V6emZ1T083cXB6MHVBeThjRktlN2tCdExTRlZqQndhRzVKWDg5bWd0dFlXK2x3OVJtc2IKcDlJdzRLS0ZISUJMT3drN3MrdTBMVWhQM2Q4bmVCSTZOZmtPWUtaWkNtM0N1dmtpT2VRUDkvMm9rRmp0aisyOQpqRUwrOUtRd3JHTkZFVk5lODVVbjVNSmZZSWpneXFYM25KY3d5cFl4aWRudG5oTWhyMlZEM0hMMlIvNENpc3dCCk9hNGc5MzA5cC8rYWYvSFUxc21Cck9mSWVSb3hiOGpRb0h1Mwo9eGc0UwotLS0tLUVORCBQR1AgUFVCTElDIEtFWSBCTE9DSy0tLS0tCg==' | base64 -d | apt-key add -] at time 21:08:21.173707
2018-10-03 21:08:21,173 [salt.state       :1803][INFO    ][3186] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-10-03 21:08:21,174 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-10-03 21:08:21,430 [salt.state       :290 ][INFO    ][3186] {'pid': 3409, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-10-03 21:08:21,431 [salt.state       :1941][INFO    ][3186] Completed state [echo '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' | base64 -d | apt-key add -] at time 21:08:21.431354 duration_in_ms=257.646
2018-10-03 21:08:21,439 [salt.state       :1770][INFO    ][3186] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 21:08:21.438989
2018-10-03 21:08:21,439 [salt.state       :1803][INFO    ][3186] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-10-03 21:08:21,572 [salt.state       :290 ][INFO    ][3186] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-10-03 21:08:21,573 [salt.state       :1941][INFO    ][3186] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 21:08:21.573119 duration_in_ms=134.131
2018-10-03 21:08:21,574 [salt.state       :1770][INFO    ][3186] Running state [pkg.refresh_db] at time 21:08:21.574402
2018-10-03 21:08:21,574 [salt.state       :1803][INFO    ][3186] Executing state module.run for [pkg.refresh_db]
2018-10-03 21:08:21,575 [salt.utils.decorators:613 ][WARNING ][3186] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-03 21:08:21,576 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 21:08:25,317 [salt.state       :290 ][INFO    ][3186] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-10-03 21:08:25,318 [salt.state       :1941][INFO    ][3186] Completed state [pkg.refresh_db] at time 21:08:25.318039 duration_in_ms=3743.636
2018-10-03 21:08:25,318 [salt.state       :1770][INFO    ][3186] Running state [linux_extra_packages_latest] at time 21:08:25.318428
2018-10-03 21:08:25,318 [salt.state       :1803][INFO    ][3186] Executing state pkg.latest for [linux_extra_packages_latest]
2018-10-03 21:08:25,336 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-10-03 21:08:25,507 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 21:08:25,533 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-10-03 21:08:27,383 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003210827367846
2018-10-03 21:08:27,410 [salt.minion      :1431][INFO    ][3959] Starting a new job with PID 3959
2018-10-03 21:08:27,437 [salt.minion      :1708][INFO    ][3959] Returning information for job: 20181003210827367846
2018-10-03 21:08:29,756 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:08:29,815 [salt.state       :290 ][INFO    ][3186] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-10-03 21:08:29,847 [salt.state       :905 ][INFO    ][3186] Loading fresh modules for state activity
2018-10-03 21:08:29,897 [salt.state       :1941][INFO    ][3186] Completed state [linux_extra_packages_latest] at time 21:08:29.897506 duration_in_ms=4579.078
2018-10-03 21:08:29,903 [salt.state       :1770][INFO    ][3186] Running state [UTC] at time 21:08:29.903754
2018-10-03 21:08:29,904 [salt.state       :1803][INFO    ][3186] Executing state timezone.system for [UTC]
2018-10-03 21:08:29,909 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['timedatectl'] in directory '/root'
2018-10-03 21:08:30,092 [salt.state       :290 ][INFO    ][3186] Timezone UTC already set, UTC already set to UTC
2018-10-03 21:08:30,092 [salt.state       :1941][INFO    ][3186] Completed state [UTC] at time 21:08:30.092734 duration_in_ms=188.979
2018-10-03 21:08:30,097 [salt.state       :1770][INFO    ][3186] Running state [/etc/default/grub.d] at time 21:08:30.097206
2018-10-03 21:08:30,097 [salt.state       :1803][INFO    ][3186] Executing state file.directory for [/etc/default/grub.d]
2018-10-03 21:08:30,104 [salt.state       :290 ][INFO    ][3186] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-10-03 21:08:30,105 [salt.state       :1941][INFO    ][3186] Completed state [/etc/default/grub.d] at time 21:08:30.105184 duration_in_ms=7.978
2018-10-03 21:08:30,112 [salt.state       :1770][INFO    ][3186] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 21:08:30.112148
2018-10-03 21:08:30,112 [salt.state       :1803][INFO    ][3186] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2018-10-03 21:08:30,211 [salt.state       :290 ][INFO    ][3186] File changed:
New file
2018-10-03 21:08:30,212 [salt.state       :1941][INFO    ][3186] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 21:08:30.212324 duration_in_ms=100.177
2018-10-03 21:08:30,213 [salt.state       :1770][INFO    ][3186] Running state [update-grub] at time 21:08:30.213571
2018-10-03 21:08:30,214 [salt.state       :1803][INFO    ][3186] Executing state cmd.wait for [update-grub]
2018-10-03 21:08:30,214 [salt.state       :290 ][INFO    ][3186] No changes made for update-grub
2018-10-03 21:08:30,215 [salt.state       :1941][INFO    ][3186] Completed state [update-grub] at time 21:08:30.215309 duration_in_ms=1.738
2018-10-03 21:08:30,216 [salt.state       :1770][INFO    ][3186] Running state [update-grub] at time 21:08:30.216314
2018-10-03 21:08:30,216 [salt.state       :1803][INFO    ][3186] Executing state cmd.mod_watch for [update-grub]
2018-10-03 21:08:30,218 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'update-grub' in directory '/root'
2018-10-03 21:08:31,529 [salt.state       :290 ][INFO    ][3186] {'pid': 4064, 'retcode': 0, 'stderr': 'Generating grub configuration file ...\nFound linux image: /boot/vmlinuz-4.15.0-34-generic\nFound initrd image: /boot/initrd.img-4.15.0-34-generic\nFound linux image: /boot/vmlinuz-4.4.0-135-generic\nFound initrd image: /boot/initrd.img-4.4.0-135-generic\ndone', 'stdout': ''}
2018-10-03 21:08:31,530 [salt.state       :1941][INFO    ][3186] Completed state [update-grub] at time 21:08:31.530885 duration_in_ms=1314.569
2018-10-03 21:08:31,538 [salt.state       :1770][INFO    ][3186] Running state [nf_conntrack] at time 21:08:31.538038
2018-10-03 21:08:31,539 [salt.state       :1803][INFO    ][3186] Executing state kmod.present for [nf_conntrack]
2018-10-03 21:08:31,540 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'lsmod' in directory '/root'
2018-10-03 21:08:32,174 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'lsmod' in directory '/root'
2018-10-03 21:08:32,189 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-10-03 21:08:32,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'lsmod' in directory '/root'
2018-10-03 21:08:32,333 [salt.state       :290 ][INFO    ][3186] {'nf_conntrack': 'loaded'}
2018-10-03 21:08:32,333 [salt.state       :1941][INFO    ][3186] Completed state [nf_conntrack] at time 21:08:32.333873 duration_in_ms=795.835
2018-10-03 21:08:32,338 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.tcp_keepalive_probes] at time 21:08:32.338300
2018-10-03 21:08:32,338 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-10-03 21:08:32,339 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-10-03 21:08:32,360 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.tcp_keepalive_probes': 8}
2018-10-03 21:08:32,360 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.tcp_keepalive_probes] at time 21:08:32.360848 duration_in_ms=22.548
2018-10-03 21:08:32,361 [salt.state       :1770][INFO    ][3186] Running state [fs.file-max] at time 21:08:32.361213
2018-10-03 21:08:32,361 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [fs.file-max]
2018-10-03 21:08:32,362 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-10-03 21:08:32,376 [salt.state       :290 ][INFO    ][3186] {'fs.file-max': 124165}
2018-10-03 21:08:32,376 [salt.state       :1941][INFO    ][3186] Completed state [fs.file-max] at time 21:08:32.376717 duration_in_ms=15.503
2018-10-03 21:08:32,377 [salt.state       :1770][INFO    ][3186] Running state [net.core.somaxconn] at time 21:08:32.377476
2018-10-03 21:08:32,377 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.core.somaxconn]
2018-10-03 21:08:32,379 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-10-03 21:08:32,395 [salt.state       :290 ][INFO    ][3186] {'net.core.somaxconn': 4096}
2018-10-03 21:08:32,396 [salt.state       :1941][INFO    ][3186] Completed state [net.core.somaxconn] at time 21:08:32.396489 duration_in_ms=19.013
2018-10-03 21:08:32,397 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.tcp_max_syn_backlog] at time 21:08:32.396994
2018-10-03 21:08:32,397 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-10-03 21:08:32,399 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-10-03 21:08:32,416 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-10-03 21:08:32,417 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.tcp_max_syn_backlog] at time 21:08:32.417008 duration_in_ms=20.013
2018-10-03 21:08:32,417 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.tcp_tw_reuse] at time 21:08:32.417361
2018-10-03 21:08:32,417 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-10-03 21:08:32,418 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-10-03 21:08:32,434 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.tcp_tw_reuse': 1}
2018-10-03 21:08:32,435 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.tcp_tw_reuse] at time 21:08:32.434998 duration_in_ms=17.637
2018-10-03 21:08:32,435 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.tcp_congestion_control] at time 21:08:32.435321
2018-10-03 21:08:32,436 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-10-03 21:08:32,437 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-10-03 21:08:32,465 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-10-03 21:08:32,466 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.tcp_congestion_control] at time 21:08:32.465949 duration_in_ms=30.627
2018-10-03 21:08:32,466 [salt.state       :1770][INFO    ][3186] Running state [net.nf_conntrack_max] at time 21:08:32.466329
2018-10-03 21:08:32,466 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.nf_conntrack_max]
2018-10-03 21:08:32,467 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-10-03 21:08:32,485 [salt.state       :290 ][INFO    ][3186] {'net.nf_conntrack_max': 1048576}
2018-10-03 21:08:32,485 [salt.state       :1941][INFO    ][3186] Completed state [net.nf_conntrack_max] at time 21:08:32.485755 duration_in_ms=19.426
2018-10-03 21:08:32,486 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.tcp_retries2] at time 21:08:32.486101
2018-10-03 21:08:32,486 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-10-03 21:08:32,487 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-10-03 21:08:32,501 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.tcp_retries2': 5}
2018-10-03 21:08:32,502 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.tcp_retries2] at time 21:08:32.501954 duration_in_ms=15.853
2018-10-03 21:08:32,502 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.tcp_fin_timeout] at time 21:08:32.502301
2018-10-03 21:08:32,502 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-10-03 21:08:32,503 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-10-03 21:08:32,517 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.tcp_fin_timeout': 30}
2018-10-03 21:08:32,517 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.tcp_fin_timeout] at time 21:08:32.517885 duration_in_ms=15.584
2018-10-03 21:08:32,518 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.tcp_slow_start_after_idle] at time 21:08:32.518238
2018-10-03 21:08:32,518 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-10-03 21:08:32,519 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-10-03 21:08:32,531 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-10-03 21:08:32,531 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 21:08:32.531707 duration_in_ms=13.469
2018-10-03 21:08:32,532 [salt.state       :1770][INFO    ][3186] Running state [vm.swappiness] at time 21:08:32.532046
2018-10-03 21:08:32,532 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [vm.swappiness]
2018-10-03 21:08:32,533 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-10-03 21:08:32,547 [salt.state       :290 ][INFO    ][3186] {'vm.swappiness': 10}
2018-10-03 21:08:32,547 [salt.state       :1941][INFO    ][3186] Completed state [vm.swappiness] at time 21:08:32.547567 duration_in_ms=15.522
2018-10-03 21:08:32,548 [salt.state       :1770][INFO    ][3186] Running state [net.core.netdev_max_backlog] at time 21:08:32.548494
2018-10-03 21:08:32,549 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-10-03 21:08:32,550 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-10-03 21:08:32,564 [salt.state       :290 ][INFO    ][3186] {'net.core.netdev_max_backlog': 261144}
2018-10-03 21:08:32,564 [salt.state       :1941][INFO    ][3186] Completed state [net.core.netdev_max_backlog] at time 21:08:32.564636 duration_in_ms=16.142
2018-10-03 21:08:32,565 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.neigh.default.gc_thresh1] at time 21:08:32.564995
2018-10-03 21:08:32,565 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-10-03 21:08:32,566 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-10-03 21:08:32,581 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-10-03 21:08:32,582 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 21:08:32.582245 duration_in_ms=17.25
2018-10-03 21:08:32,582 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.neigh.default.gc_thresh2] at time 21:08:32.582614
2018-10-03 21:08:32,582 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-10-03 21:08:32,583 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-10-03 21:08:32,598 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-10-03 21:08:32,598 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 21:08:32.598738 duration_in_ms=16.124
2018-10-03 21:08:32,599 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.neigh.default.gc_thresh3] at time 21:08:32.599077
2018-10-03 21:08:32,599 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-10-03 21:08:32,601 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-10-03 21:08:32,617 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-10-03 21:08:32,617 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 21:08:32.617795 duration_in_ms=18.717
2018-10-03 21:08:32,618 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.tcp_keepalive_intvl] at time 21:08:32.618151
2018-10-03 21:08:32,618 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-10-03 21:08:32,619 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-10-03 21:08:32,633 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-10-03 21:08:32,634 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.tcp_keepalive_intvl] at time 21:08:32.633999 duration_in_ms=15.848
2018-10-03 21:08:32,634 [salt.state       :1770][INFO    ][3186] Running state [net.ipv4.tcp_keepalive_time] at time 21:08:32.634352
2018-10-03 21:08:32,634 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-10-03 21:08:32,635 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-10-03 21:08:32,651 [salt.state       :290 ][INFO    ][3186] {'net.ipv4.tcp_keepalive_time': 30}
2018-10-03 21:08:32,652 [salt.state       :1941][INFO    ][3186] Completed state [net.ipv4.tcp_keepalive_time] at time 21:08:32.652636 duration_in_ms=18.284
2018-10-03 21:08:32,653 [salt.state       :1770][INFO    ][3186] Running state [kernel.panic] at time 21:08:32.653437
2018-10-03 21:08:32,653 [salt.state       :1803][INFO    ][3186] Executing state sysctl.present for [kernel.panic]
2018-10-03 21:08:32,655 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-10-03 21:08:32,674 [salt.state       :290 ][INFO    ][3186] {'kernel.panic': 60}
2018-10-03 21:08:32,674 [salt.state       :1941][INFO    ][3186] Completed state [kernel.panic] at time 21:08:32.674779 duration_in_ms=21.342
2018-10-03 21:08:32,684 [salt.state       :1770][INFO    ][3186] Running state [linux_sysfs_package] at time 21:08:32.684721
2018-10-03 21:08:32,685 [salt.state       :1803][INFO    ][3186] Executing state pkg.installed for [linux_sysfs_package]
2018-10-03 21:08:33,478 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-10-03 21:08:33,646 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 21:08:35,559 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 21:08:35,588 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-10-03 21:08:37,532 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003210837516641
2018-10-03 21:08:37,553 [salt.minion      :1431][INFO    ][5129] Starting a new job with PID 5129
2018-10-03 21:08:37,576 [salt.minion      :1708][INFO    ][5129] Returning information for job: 20181003210837516641
2018-10-03 21:08:39,958 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:08:40,009 [salt.state       :290 ][INFO    ][3186] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-10-03 21:08:40,038 [salt.state       :905 ][INFO    ][3186] Loading fresh modules for state activity
2018-10-03 21:08:40,092 [salt.state       :1941][INFO    ][3186] Completed state [linux_sysfs_package] at time 21:08:40.092301 duration_in_ms=7407.579
2018-10-03 21:08:40,097 [salt.state       :1770][INFO    ][3186] Running state [/etc/sysfs.d] at time 21:08:40.097498
2018-10-03 21:08:40,097 [salt.state       :1803][INFO    ][3186] Executing state file.directory for [/etc/sysfs.d]
2018-10-03 21:08:40,103 [salt.state       :290 ][INFO    ][3186] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-10-03 21:08:40,103 [salt.state       :1941][INFO    ][3186] Completed state [/etc/sysfs.d] at time 21:08:40.103681 duration_in_ms=6.183
2018-10-03 21:08:40,674 [salt.state       :1770][INFO    ][3186] Running state [ondemand] at time 21:08:40.674540
2018-10-03 21:08:40,674 [salt.state       :1803][INFO    ][3186] Executing state service.dead for [ondemand]
2018-10-03 21:08:40,675 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-10-03 21:08:40,694 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-03 21:08:40,711 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-03 21:08:40,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-10-03 21:08:40,800 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-03 21:08:40,827 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-03 21:08:40,854 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-03 21:08:40,885 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-10-03 21:08:41,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-03 21:08:41,090 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'runlevel' in directory '/root'
2018-10-03 21:08:41,103 [salt.state       :290 ][INFO    ][3186] {'ondemand': True}
2018-10-03 21:08:41,104 [salt.state       :1941][INFO    ][3186] Completed state [ondemand] at time 21:08:41.103962 duration_in_ms=429.422
2018-10-03 21:08:41,105 [salt.state       :1770][INFO    ][3186] Running state [en_US.UTF-8] at time 21:08:41.105452
2018-10-03 21:08:41,105 [salt.state       :1803][INFO    ][3186] Executing state locale.present for [en_US.UTF-8]
2018-10-03 21:08:41,106 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'locale -a' in directory '/root'
2018-10-03 21:08:41,117 [salt.state       :290 ][INFO    ][3186] Locale en_US.UTF-8 is already present
2018-10-03 21:08:41,118 [salt.state       :1941][INFO    ][3186] Completed state [en_US.UTF-8] at time 21:08:41.118454 duration_in_ms=13.002
2018-10-03 21:08:41,120 [salt.state       :1770][INFO    ][3186] Running state [en_US.UTF-8] at time 21:08:41.120771
2018-10-03 21:08:41,121 [salt.state       :1803][INFO    ][3186] Executing state locale.system for [en_US.UTF-8]
2018-10-03 21:08:41,122 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'localectl' in directory '/root'
2018-10-03 21:08:41,178 [salt.state       :290 ][INFO    ][3186] System locale en_US.UTF-8 already set
2018-10-03 21:08:41,179 [salt.state       :1941][INFO    ][3186] Completed state [en_US.UTF-8] at time 21:08:41.179289 duration_in_ms=58.517
2018-10-03 21:08:41,182 [salt.state       :1770][INFO    ][3186] Running state [root] at time 21:08:41.182281
2018-10-03 21:08:41,182 [salt.state       :1803][INFO    ][3186] Executing state group.present for [root]
2018-10-03 21:08:41,183 [salt.state       :290 ][INFO    ][3186] Group root is present and up to date
2018-10-03 21:08:41,187 [salt.state       :1941][INFO    ][3186] Completed state [root] at time 21:08:41.187317 duration_in_ms=5.036
2018-10-03 21:08:41,193 [salt.state       :1770][INFO    ][3186] Running state [root] at time 21:08:41.193620
2018-10-03 21:08:41,194 [salt.state       :1803][INFO    ][3186] Executing state user.present for [root]
2018-10-03 21:08:41,199 [salt.state       :290 ][INFO    ][3186] User root is present and up to date
2018-10-03 21:08:41,199 [salt.state       :1941][INFO    ][3186] Completed state [root] at time 21:08:41.199751 duration_in_ms=6.131
2018-10-03 21:08:41,200 [salt.state       :1770][INFO    ][3186] Running state [/root] at time 21:08:41.200959
2018-10-03 21:08:41,201 [salt.state       :1803][INFO    ][3186] Executing state file.directory for [/root]
2018-10-03 21:08:41,202 [salt.state       :290 ][INFO    ][3186] Directory /root is in the correct state
Directory /root updated
2018-10-03 21:08:41,202 [salt.state       :1941][INFO    ][3186] Completed state [/root] at time 21:08:41.202904 duration_in_ms=1.945
2018-10-03 21:08:41,203 [salt.state       :1770][INFO    ][3186] Running state [/etc/sudoers.d/90-salt-user-root] at time 21:08:41.203306
2018-10-03 21:08:41,205 [salt.state       :1803][INFO    ][3186] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-10-03 21:08:41,206 [salt.state       :290 ][INFO    ][3186] File /etc/sudoers.d/90-salt-user-root is not present
2018-10-03 21:08:41,206 [salt.state       :1941][INFO    ][3186] Completed state [/etc/sudoers.d/90-salt-user-root] at time 21:08:41.206765 duration_in_ms=3.459
2018-10-03 21:08:41,207 [salt.state       :1770][INFO    ][3186] Running state [ubuntu] at time 21:08:41.207158
2018-10-03 21:08:41,207 [salt.state       :1803][INFO    ][3186] Executing state group.present for [ubuntu]
2018-10-03 21:08:41,208 [salt.state       :290 ][INFO    ][3186] Group ubuntu is present and up to date
2018-10-03 21:08:41,208 [salt.state       :1941][INFO    ][3186] Completed state [ubuntu] at time 21:08:41.208808 duration_in_ms=1.651
2018-10-03 21:08:41,209 [salt.state       :1770][INFO    ][3186] Running state [ubuntu] at time 21:08:41.209805
2018-10-03 21:08:41,210 [salt.state       :1803][INFO    ][3186] Executing state user.present for [ubuntu]
2018-10-03 21:08:41,216 [salt.state       :290 ][INFO    ][3186] {'passwd': 'XXX-REDACTED-XXX'}
2018-10-03 21:08:41,216 [salt.state       :1941][INFO    ][3186] Completed state [ubuntu] at time 21:08:41.216789 duration_in_ms=6.984
2018-10-03 21:08:41,218 [salt.state       :1770][INFO    ][3186] Running state [/home/ubuntu] at time 21:08:41.217981
2018-10-03 21:08:41,218 [salt.state       :1803][INFO    ][3186] Executing state file.directory for [/home/ubuntu]
2018-10-03 21:08:41,219 [salt.state       :290 ][INFO    ][3186] {'mode': '0700'}
2018-10-03 21:08:41,220 [salt.state       :1941][INFO    ][3186] Completed state [/home/ubuntu] at time 21:08:41.219970 duration_in_ms=1.989
2018-10-03 21:08:41,221 [salt.state       :1770][INFO    ][3186] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 21:08:41.221020
2018-10-03 21:08:41,221 [salt.state       :1803][INFO    ][3186] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-10-03 21:08:41,248 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-10-03 21:08:41,265 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.H0IhlQ' in directory '/root'
2018-10-03 21:08:41,295 [salt.state       :290 ][INFO    ][3186] File changed:
New file
2018-10-03 21:08:41,296 [salt.state       :1941][INFO    ][3186] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 21:08:41.296761 duration_in_ms=75.74
2018-10-03 21:08:41,297 [salt.state       :1770][INFO    ][3186] Running state [/etc/security/limits.d/90-salt-default.conf] at time 21:08:41.297253
2018-10-03 21:08:41,297 [salt.state       :1803][INFO    ][3186] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-10-03 21:08:41,990 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-10-03 21:08:42,124 [salt.state       :290 ][INFO    ][3186] File changed:
New file
2018-10-03 21:08:42,124 [salt.state       :1941][INFO    ][3186] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 21:08:42.124658 duration_in_ms=827.405
2018-10-03 21:08:42,125 [salt.state       :1770][INFO    ][3186] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 21:08:42.124891
2018-10-03 21:08:42,125 [salt.state       :1803][INFO    ][3186] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-10-03 21:08:42,145 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-10-03 21:08:42,255 [salt.state       :290 ][INFO    ][3186] File changed:
New file
2018-10-03 21:08:42,256 [salt.state       :1941][INFO    ][3186] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 21:08:42.256229 duration_in_ms=131.338
2018-10-03 21:08:42,258 [salt.state       :1770][INFO    ][3186] Running state [service.systemctl_reload] at time 21:08:42.258816
2018-10-03 21:08:42,259 [salt.state       :1803][INFO    ][3186] Executing state module.wait for [service.systemctl_reload]
2018-10-03 21:08:42,259 [salt.state       :290 ][INFO    ][3186] No changes made for service.systemctl_reload
2018-10-03 21:08:42,259 [salt.state       :1941][INFO    ][3186] Completed state [service.systemctl_reload] at time 21:08:42.259417 duration_in_ms=0.601
2018-10-03 21:08:42,260 [salt.state       :1770][INFO    ][3186] Running state [service.systemctl_reload] at time 21:08:42.260442
2018-10-03 21:08:42,260 [salt.state       :1803][INFO    ][3186] Executing state module.mod_watch for [service.systemctl_reload]
2018-10-03 21:08:42,261 [salt.utils.decorators:613 ][WARNING ][3186] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-03 21:08:42,261 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-10-03 21:08:42,402 [salt.state       :290 ][INFO    ][3186] {'ret': True}
2018-10-03 21:08:42,403 [salt.state       :1941][INFO    ][3186] Completed state [service.systemctl_reload] at time 21:08:42.403452 duration_in_ms=143.01
2018-10-03 21:08:42,405 [salt.state       :1770][INFO    ][3186] Running state [/etc/issue] at time 21:08:42.405044
2018-10-03 21:08:42,405 [salt.state       :1803][INFO    ][3186] Executing state file.managed for [/etc/issue]
2018-10-03 21:08:42,427 [salt.state       :290 ][INFO    ][3186] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-10-03 21:08:42,427 [salt.state       :1941][INFO    ][3186] Completed state [/etc/issue] at time 21:08:42.427618 duration_in_ms=22.574
2018-10-03 21:08:42,427 [salt.state       :1770][INFO    ][3186] Running state [/etc/hostname] at time 21:08:42.427855
2018-10-03 21:08:42,428 [salt.state       :1803][INFO    ][3186] Executing state file.managed for [/etc/hostname]
2018-10-03 21:08:42,450 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-10-03 21:08:42,462 [salt.state       :290 ][INFO    ][3186] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb02

2018-10-03 21:08:42,462 [salt.state       :1941][INFO    ][3186] Completed state [/etc/hostname] at time 21:08:42.462722 duration_in_ms=34.866
2018-10-03 21:08:42,464 [salt.state       :1770][INFO    ][3186] Running state [hostname mdb02] at time 21:08:42.464812
2018-10-03 21:08:42,465 [salt.state       :1803][INFO    ][3186] Executing state cmd.run for [hostname mdb02]
2018-10-03 21:08:42,465 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'test "$(hostname)" = "mdb02"' in directory '/root'
2018-10-03 21:08:42,483 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command 'hostname mdb02' in directory '/root'
2018-10-03 21:08:42,499 [salt.state       :290 ][INFO    ][3186] {'pid': 5477, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-03 21:08:42,500 [salt.state       :1941][INFO    ][3186] Completed state [hostname mdb02] at time 21:08:42.500524 duration_in_ms=35.711
2018-10-03 21:08:42,501 [salt.state       :1770][INFO    ][3186] Running state [mdb02] at time 21:08:42.501770
2018-10-03 21:08:42,502 [salt.state       :1803][INFO    ][3186] Executing state host.present for [mdb02]
2018-10-03 21:08:42,505 [salt.state       :290 ][INFO    ][3186] {'host': 'mdb02'}
2018-10-03 21:08:42,505 [salt.state       :1941][INFO    ][3186] Completed state [mdb02] at time 21:08:42.505232 duration_in_ms=3.462
2018-10-03 21:08:42,505 [salt.state       :1770][INFO    ][3186] Running state [mdb02.mcp-ovs-ha.local] at time 21:08:42.505584
2018-10-03 21:08:42,505 [salt.state       :1803][INFO    ][3186] Executing state host.present for [mdb02.mcp-ovs-ha.local]
2018-10-03 21:08:42,507 [salt.state       :290 ][INFO    ][3186] {'host': 'mdb02.mcp-ovs-ha.local'}
2018-10-03 21:08:42,507 [salt.state       :1941][INFO    ][3186] Completed state [mdb02.mcp-ovs-ha.local] at time 21:08:42.507561 duration_in_ms=1.977
2018-10-03 21:08:42,508 [salt.state       :1770][INFO    ][3186] Running state [mdb03] at time 21:08:42.508388
2018-10-03 21:08:42,508 [salt.state       :1803][INFO    ][3186] Executing state host.present for [mdb03]
2018-10-03 21:08:42,510 [salt.state       :290 ][INFO    ][3186] {'host': 'mdb03'}
2018-10-03 21:08:42,510 [salt.state       :1941][INFO    ][3186] Completed state [mdb03] at time 21:08:42.510752 duration_in_ms=2.365
2018-10-03 21:08:42,511 [salt.state       :1770][INFO    ][3186] Running state [mdb03.mcp-ovs-ha.local] at time 21:08:42.511273
2018-10-03 21:08:42,512 [salt.state       :1803][INFO    ][3186] Executing state host.present for [mdb03.mcp-ovs-ha.local]
2018-10-03 21:08:42,514 [salt.state       :290 ][INFO    ][3186] {'host': 'mdb03.mcp-ovs-ha.local'}
2018-10-03 21:08:42,514 [salt.state       :1941][INFO    ][3186] Completed state [mdb03.mcp-ovs-ha.local] at time 21:08:42.514792 duration_in_ms=3.519
2018-10-03 21:08:42,515 [salt.state       :1770][INFO    ][3186] Running state [mdb01] at time 21:08:42.515301
2018-10-03 21:08:42,516 [salt.state       :1803][INFO    ][3186] Executing state host.present for [mdb01]
2018-10-03 21:08:42,517 [salt.state       :290 ][INFO    ][3186] {'host': 'mdb01'}
2018-10-03 21:08:42,518 [salt.state       :1941][INFO    ][3186] Completed state [mdb01] at time 21:08:42.518051 duration_in_ms=2.749
2018-10-03 21:08:42,518 [salt.state       :1770][INFO    ][3186] Running state [mdb01.mcp-ovs-ha.local] at time 21:08:42.518573
2018-10-03 21:08:42,518 [salt.state       :1803][INFO    ][3186] Executing state host.present for [mdb01.mcp-ovs-ha.local]
2018-10-03 21:08:42,520 [salt.state       :290 ][INFO    ][3186] {'host': 'mdb01.mcp-ovs-ha.local'}
2018-10-03 21:08:42,520 [salt.state       :1941][INFO    ][3186] Completed state [mdb01.mcp-ovs-ha.local] at time 21:08:42.520636 duration_in_ms=2.063
2018-10-03 21:08:42,522 [salt.state       :1770][INFO    ][3186] Running state [mdb] at time 21:08:42.522016
2018-10-03 21:08:42,522 [salt.state       :1803][INFO    ][3186] Executing state host.present for [mdb]
2018-10-03 21:08:42,526 [salt.state       :290 ][INFO    ][3186] {'host': 'mdb'}
2018-10-03 21:08:42,527 [salt.state       :1941][INFO    ][3186] Completed state [mdb] at time 21:08:42.527104 duration_in_ms=5.088
2018-10-03 21:08:42,528 [salt.state       :1770][INFO    ][3186] Running state [mdb.mcp-ovs-ha.local] at time 21:08:42.527952
2018-10-03 21:08:42,528 [salt.state       :1803][INFO    ][3186] Executing state host.present for [mdb.mcp-ovs-ha.local]
2018-10-03 21:08:42,529 [salt.state       :290 ][INFO    ][3186] {'host': 'mdb.mcp-ovs-ha.local'}
2018-10-03 21:08:42,530 [salt.state       :1941][INFO    ][3186] Completed state [mdb.mcp-ovs-ha.local] at time 21:08:42.530007 duration_in_ms=2.055
2018-10-03 21:08:42,531 [salt.state       :1770][INFO    ][3186] Running state [cfg01] at time 21:08:42.530830
2018-10-03 21:08:42,531 [salt.state       :1803][INFO    ][3186] Executing state host.present for [cfg01]
2018-10-03 21:08:42,549 [salt.state       :290 ][INFO    ][3186] {'host': 'cfg01'}
2018-10-03 21:08:42,549 [salt.state       :1941][INFO    ][3186] Completed state [cfg01] at time 21:08:42.549839 duration_in_ms=19.009
2018-10-03 21:08:42,550 [salt.state       :1770][INFO    ][3186] Running state [cfg01.mcp-ovs-ha.local] at time 21:08:42.550263
2018-10-03 21:08:42,550 [salt.state       :1803][INFO    ][3186] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-03 21:08:42,581 [salt.state       :290 ][INFO    ][3186] {'host': 'cfg01.mcp-ovs-ha.local'}
2018-10-03 21:08:42,582 [salt.state       :1941][INFO    ][3186] Completed state [cfg01.mcp-ovs-ha.local] at time 21:08:42.582265 duration_in_ms=32.002
2018-10-03 21:08:42,582 [salt.state       :1770][INFO    ][3186] Running state [prx01] at time 21:08:42.582631
2018-10-03 21:08:42,582 [salt.state       :1803][INFO    ][3186] Executing state host.present for [prx01]
2018-10-03 21:08:42,585 [salt.state       :290 ][INFO    ][3186] {'host': 'prx01'}
2018-10-03 21:08:42,586 [salt.state       :1941][INFO    ][3186] Completed state [prx01] at time 21:08:42.586288 duration_in_ms=3.657
2018-10-03 21:08:42,586 [salt.state       :1770][INFO    ][3186] Running state [prx01.mcp-ovs-ha.local] at time 21:08:42.586591
2018-10-03 21:08:42,586 [salt.state       :1803][INFO    ][3186] Executing state host.present for [prx01.mcp-ovs-ha.local]
2018-10-03 21:08:42,587 [salt.state       :290 ][INFO    ][3186] {'host': 'prx01.mcp-ovs-ha.local'}
2018-10-03 21:08:42,589 [salt.state       :1941][INFO    ][3186] Completed state [prx01.mcp-ovs-ha.local] at time 21:08:42.588859 duration_in_ms=2.267
2018-10-03 21:08:42,589 [salt.state       :1770][INFO    ][3186] Running state [kvm01] at time 21:08:42.589831
2018-10-03 21:08:42,590 [salt.state       :1803][INFO    ][3186] Executing state host.present for [kvm01]
2018-10-03 21:08:42,592 [salt.state       :290 ][INFO    ][3186] {'host': 'kvm01'}
2018-10-03 21:08:42,593 [salt.state       :1941][INFO    ][3186] Completed state [kvm01] at time 21:08:42.593072 duration_in_ms=3.241
2018-10-03 21:08:42,593 [salt.state       :1770][INFO    ][3186] Running state [kvm01.mcp-ovs-ha.local] at time 21:08:42.593373
2018-10-03 21:08:42,593 [salt.state       :1803][INFO    ][3186] Executing state host.present for [kvm01.mcp-ovs-ha.local]
2018-10-03 21:08:42,594 [salt.state       :290 ][INFO    ][3186] {'host': 'kvm01.mcp-ovs-ha.local'}
2018-10-03 21:08:42,594 [salt.state       :1941][INFO    ][3186] Completed state [kvm01.mcp-ovs-ha.local] at time 21:08:42.594821 duration_in_ms=1.449
2018-10-03 21:08:42,595 [salt.state       :1770][INFO    ][3186] Running state [kvm03] at time 21:08:42.595118
2018-10-03 21:08:42,595 [salt.state       :1803][INFO    ][3186] Executing state host.present for [kvm03]
2018-10-03 21:08:42,596 [salt.state       :290 ][INFO    ][3186] {'host': 'kvm03'}
2018-10-03 21:08:42,596 [salt.state       :1941][INFO    ][3186] Completed state [kvm03] at time 21:08:42.596499 duration_in_ms=1.381
2018-10-03 21:08:42,596 [salt.state       :1770][INFO    ][3186] Running state [kvm03.mcp-ovs-ha.local] at time 21:08:42.596809
2018-10-03 21:08:42,597 [salt.state       :1803][INFO    ][3186] Executing state host.present for [kvm03.mcp-ovs-ha.local]
2018-10-03 21:08:42,598 [salt.state       :290 ][INFO    ][3186] {'host': 'kvm03.mcp-ovs-ha.local'}
2018-10-03 21:08:42,598 [salt.state       :1941][INFO    ][3186] Completed state [kvm03.mcp-ovs-ha.local] at time 21:08:42.598700 duration_in_ms=1.891
2018-10-03 21:08:42,599 [salt.state       :1770][INFO    ][3186] Running state [kvm02] at time 21:08:42.599006
2018-10-03 21:08:42,599 [salt.state       :1803][INFO    ][3186] Executing state host.present for [kvm02]
2018-10-03 21:08:42,601 [salt.state       :290 ][INFO    ][3186] {'host': 'kvm02'}
2018-10-03 21:08:42,602 [salt.state       :1941][INFO    ][3186] Completed state [kvm02] at time 21:08:42.602007 duration_in_ms=3.001
2018-10-03 21:08:42,602 [salt.state       :1770][INFO    ][3186] Running state [kvm02.mcp-ovs-ha.local] at time 21:08:42.602346
2018-10-03 21:08:42,602 [salt.state       :1803][INFO    ][3186] Executing state host.present for [kvm02.mcp-ovs-ha.local]
2018-10-03 21:08:42,603 [salt.state       :290 ][INFO    ][3186] {'host': 'kvm02.mcp-ovs-ha.local'}
2018-10-03 21:08:42,604 [salt.state       :1941][INFO    ][3186] Completed state [kvm02.mcp-ovs-ha.local] at time 21:08:42.604032 duration_in_ms=1.686
2018-10-03 21:08:42,604 [salt.state       :1770][INFO    ][3186] Running state [dbs] at time 21:08:42.604508
2018-10-03 21:08:42,604 [salt.state       :1803][INFO    ][3186] Executing state host.present for [dbs]
2018-10-03 21:08:42,606 [salt.state       :290 ][INFO    ][3186] {'host': 'dbs'}
2018-10-03 21:08:42,606 [salt.state       :1941][INFO    ][3186] Completed state [dbs] at time 21:08:42.606382 duration_in_ms=1.873
2018-10-03 21:08:42,606 [salt.state       :1770][INFO    ][3186] Running state [dbs.mcp-ovs-ha.local] at time 21:08:42.606811
2018-10-03 21:08:42,607 [salt.state       :1803][INFO    ][3186] Executing state host.present for [dbs.mcp-ovs-ha.local]
2018-10-03 21:08:42,610 [salt.state       :290 ][INFO    ][3186] {'host': 'dbs.mcp-ovs-ha.local'}
2018-10-03 21:08:42,610 [salt.state       :1941][INFO    ][3186] Completed state [dbs.mcp-ovs-ha.local] at time 21:08:42.610234 duration_in_ms=3.423
2018-10-03 21:08:42,610 [salt.state       :1770][INFO    ][3186] Running state [prx] at time 21:08:42.610543
2018-10-03 21:08:42,610 [salt.state       :1803][INFO    ][3186] Executing state host.present for [prx]
2018-10-03 21:08:42,612 [salt.state       :290 ][INFO    ][3186] {'host': 'prx'}
2018-10-03 21:08:42,612 [salt.state       :1941][INFO    ][3186] Completed state [prx] at time 21:08:42.612877 duration_in_ms=2.333
2018-10-03 21:08:42,613 [salt.state       :1770][INFO    ][3186] Running state [prx.mcp-ovs-ha.local] at time 21:08:42.613385
2018-10-03 21:08:42,613 [salt.state       :1803][INFO    ][3186] Executing state host.present for [prx.mcp-ovs-ha.local]
2018-10-03 21:08:42,615 [salt.state       :290 ][INFO    ][3186] {'host': 'prx.mcp-ovs-ha.local'}
2018-10-03 21:08:42,615 [salt.state       :1941][INFO    ][3186] Completed state [prx.mcp-ovs-ha.local] at time 21:08:42.615456 duration_in_ms=2.072
2018-10-03 21:08:42,615 [salt.state       :1770][INFO    ][3186] Running state [prx02] at time 21:08:42.615886
2018-10-03 21:08:42,616 [salt.state       :1803][INFO    ][3186] Executing state host.present for [prx02]
2018-10-03 21:08:42,617 [salt.state       :290 ][INFO    ][3186] {'host': 'prx02'}
2018-10-03 21:08:42,618 [salt.state       :1941][INFO    ][3186] Completed state [prx02] at time 21:08:42.618243 duration_in_ms=2.358
2018-10-03 21:08:42,618 [salt.state       :1770][INFO    ][3186] Running state [prx02.mcp-ovs-ha.local] at time 21:08:42.618635
2018-10-03 21:08:42,618 [salt.state       :1803][INFO    ][3186] Executing state host.present for [prx02.mcp-ovs-ha.local]
2018-10-03 21:08:42,621 [salt.state       :290 ][INFO    ][3186] {'host': 'prx02.mcp-ovs-ha.local'}
2018-10-03 21:08:42,621 [salt.state       :1941][INFO    ][3186] Completed state [prx02.mcp-ovs-ha.local] at time 21:08:42.621810 duration_in_ms=3.175
2018-10-03 21:08:42,622 [salt.state       :1770][INFO    ][3186] Running state [msg02] at time 21:08:42.622542
2018-10-03 21:08:42,622 [salt.state       :1803][INFO    ][3186] Executing state host.present for [msg02]
2018-10-03 21:08:42,658 [salt.state       :290 ][INFO    ][3186] {'host': 'msg02'}
2018-10-03 21:08:42,659 [salt.state       :1941][INFO    ][3186] Completed state [msg02] at time 21:08:42.659062 duration_in_ms=36.52
2018-10-03 21:08:42,659 [salt.state       :1770][INFO    ][3186] Running state [msg02.mcp-ovs-ha.local] at time 21:08:42.659506
2018-10-03 21:08:42,661 [salt.state       :1803][INFO    ][3186] Executing state host.present for [msg02.mcp-ovs-ha.local]
2018-10-03 21:08:42,663 [salt.state       :290 ][INFO    ][3186] {'host': 'msg02.mcp-ovs-ha.local'}
2018-10-03 21:08:42,663 [salt.state       :1941][INFO    ][3186] Completed state [msg02.mcp-ovs-ha.local] at time 21:08:42.663392 duration_in_ms=3.886
2018-10-03 21:08:42,663 [salt.state       :1770][INFO    ][3186] Running state [msg03] at time 21:08:42.663923
2018-10-03 21:08:42,664 [salt.state       :1803][INFO    ][3186] Executing state host.present for [msg03]
2018-10-03 21:08:42,665 [salt.state       :290 ][INFO    ][3186] {'host': 'msg03'}
2018-10-03 21:08:42,665 [salt.state       :1941][INFO    ][3186] Completed state [msg03] at time 21:08:42.665837 duration_in_ms=1.914
2018-10-03 21:08:42,666 [salt.state       :1770][INFO    ][3186] Running state [msg03.mcp-ovs-ha.local] at time 21:08:42.666165
2018-10-03 21:08:42,666 [salt.state       :1803][INFO    ][3186] Executing state host.present for [msg03.mcp-ovs-ha.local]
2018-10-03 21:08:42,667 [salt.state       :290 ][INFO    ][3186] {'host': 'msg03.mcp-ovs-ha.local'}
2018-10-03 21:08:42,668 [salt.state       :1941][INFO    ][3186] Completed state [msg03.mcp-ovs-ha.local] at time 21:08:42.667566 duration_in_ms=1.401
2018-10-03 21:08:42,668 [salt.state       :1770][INFO    ][3186] Running state [msg01] at time 21:08:42.668464
2018-10-03 21:08:42,668 [salt.state       :1803][INFO    ][3186] Executing state host.present for [msg01]
2018-10-03 21:08:42,669 [salt.state       :290 ][INFO    ][3186] {'host': 'msg01'}
2018-10-03 21:08:42,670 [salt.state       :1941][INFO    ][3186] Completed state [msg01] at time 21:08:42.670147 duration_in_ms=1.683
2018-10-03 21:08:42,670 [salt.state       :1770][INFO    ][3186] Running state [msg01.mcp-ovs-ha.local] at time 21:08:42.670461
2018-10-03 21:08:42,670 [salt.state       :1803][INFO    ][3186] Executing state host.present for [msg01.mcp-ovs-ha.local]
2018-10-03 21:08:42,673 [salt.state       :290 ][INFO    ][3186] {'host': 'msg01.mcp-ovs-ha.local'}
2018-10-03 21:08:42,673 [salt.state       :1941][INFO    ][3186] Completed state [msg01.mcp-ovs-ha.local] at time 21:08:42.673738 duration_in_ms=3.277
2018-10-03 21:08:42,674 [salt.state       :1770][INFO    ][3186] Running state [msg] at time 21:08:42.674048
2018-10-03 21:08:42,674 [salt.state       :1803][INFO    ][3186] Executing state host.present for [msg]
2018-10-03 21:08:42,675 [salt.state       :290 ][INFO    ][3186] {'host': 'msg'}
2018-10-03 21:08:42,675 [salt.state       :1941][INFO    ][3186] Completed state [msg] at time 21:08:42.675522 duration_in_ms=1.474
2018-10-03 21:08:42,676 [salt.state       :1770][INFO    ][3186] Running state [msg.mcp-ovs-ha.local] at time 21:08:42.676335
2018-10-03 21:08:42,676 [salt.state       :1803][INFO    ][3186] Executing state host.present for [msg.mcp-ovs-ha.local]
2018-10-03 21:08:42,678 [salt.state       :290 ][INFO    ][3186] {'host': 'msg.mcp-ovs-ha.local'}
2018-10-03 21:08:42,678 [salt.state       :1941][INFO    ][3186] Completed state [msg.mcp-ovs-ha.local] at time 21:08:42.678552 duration_in_ms=2.218
2018-10-03 21:08:42,679 [salt.state       :1770][INFO    ][3186] Running state [cfg01] at time 21:08:42.679046
2018-10-03 21:08:42,679 [salt.state       :1803][INFO    ][3186] Executing state host.present for [cfg01]
2018-10-03 21:08:42,680 [salt.state       :290 ][INFO    ][3186] Host cfg01 (192.168.10.11) already present
2018-10-03 21:08:42,680 [salt.state       :1941][INFO    ][3186] Completed state [cfg01] at time 21:08:42.680714 duration_in_ms=1.667
2018-10-03 21:08:42,681 [salt.state       :1770][INFO    ][3186] Running state [cfg01.mcp-ovs-ha.local] at time 21:08:42.681254
2018-10-03 21:08:42,681 [salt.state       :1803][INFO    ][3186] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-03 21:08:42,682 [salt.state       :290 ][INFO    ][3186] Host cfg01.mcp-ovs-ha.local (192.168.10.11) already present
2018-10-03 21:08:42,682 [salt.state       :1941][INFO    ][3186] Completed state [cfg01.mcp-ovs-ha.local] at time 21:08:42.682654 duration_in_ms=1.4
2018-10-03 21:08:42,683 [salt.state       :1770][INFO    ][3186] Running state [cmp002] at time 21:08:42.683174
2018-10-03 21:08:42,684 [salt.state       :1803][INFO    ][3186] Executing state host.present for [cmp002]
2018-10-03 21:08:42,690 [salt.state       :290 ][INFO    ][3186] {'host': 'cmp002'}
2018-10-03 21:08:42,690 [salt.state       :1941][INFO    ][3186] Completed state [cmp002] at time 21:08:42.690610 duration_in_ms=7.437
2018-10-03 21:08:42,691 [salt.state       :1770][INFO    ][3186] Running state [cmp002.mcp-ovs-ha.local] at time 21:08:42.691130
2018-10-03 21:08:42,691 [salt.state       :1803][INFO    ][3186] Executing state host.present for [cmp002.mcp-ovs-ha.local]
2018-10-03 21:08:42,695 [salt.state       :290 ][INFO    ][3186] {'host': 'cmp002.mcp-ovs-ha.local'}
2018-10-03 21:08:42,696 [salt.state       :1941][INFO    ][3186] Completed state [cmp002.mcp-ovs-ha.local] at time 21:08:42.696034 duration_in_ms=4.905
2018-10-03 21:08:42,696 [salt.state       :1770][INFO    ][3186] Running state [cmp001] at time 21:08:42.696563
2018-10-03 21:08:42,696 [salt.state       :1803][INFO    ][3186] Executing state host.present for [cmp001]
2018-10-03 21:08:42,699 [salt.state       :290 ][INFO    ][3186] {'host': 'cmp001'}
2018-10-03 21:08:42,699 [salt.state       :1941][INFO    ][3186] Completed state [cmp001] at time 21:08:42.699480 duration_in_ms=2.917
2018-10-03 21:08:42,699 [salt.state       :1770][INFO    ][3186] Running state [cmp001.mcp-ovs-ha.local] at time 21:08:42.699939
2018-10-03 21:08:42,700 [salt.state       :1803][INFO    ][3186] Executing state host.present for [cmp001.mcp-ovs-ha.local]
2018-10-03 21:08:42,701 [salt.state       :290 ][INFO    ][3186] {'host': 'cmp001.mcp-ovs-ha.local'}
2018-10-03 21:08:42,701 [salt.state       :1941][INFO    ][3186] Completed state [cmp001.mcp-ovs-ha.local] at time 21:08:42.701743 duration_in_ms=1.804
2018-10-03 21:08:42,702 [salt.state       :1770][INFO    ][3186] Running state [dbs01] at time 21:08:42.702081
2018-10-03 21:08:42,702 [salt.state       :1803][INFO    ][3186] Executing state host.present for [dbs01]
2018-10-03 21:08:42,705 [salt.state       :290 ][INFO    ][3186] {'host': 'dbs01'}
2018-10-03 21:08:42,705 [salt.state       :1941][INFO    ][3186] Completed state [dbs01] at time 21:08:42.705452 duration_in_ms=3.372
2018-10-03 21:08:42,706 [salt.state       :1770][INFO    ][3186] Running state [dbs01.mcp-ovs-ha.local] at time 21:08:42.706160
2018-10-03 21:08:42,706 [salt.state       :1803][INFO    ][3186] Executing state host.present for [dbs01.mcp-ovs-ha.local]
2018-10-03 21:08:42,707 [salt.state       :290 ][INFO    ][3186] {'host': 'dbs01.mcp-ovs-ha.local'}
2018-10-03 21:08:42,707 [salt.state       :1941][INFO    ][3186] Completed state [dbs01.mcp-ovs-ha.local] at time 21:08:42.707616 duration_in_ms=1.455
2018-10-03 21:08:42,707 [salt.state       :1770][INFO    ][3186] Running state [dbs02] at time 21:08:42.707919
2018-10-03 21:08:42,708 [salt.state       :1803][INFO    ][3186] Executing state host.present for [dbs02]
2018-10-03 21:08:42,709 [salt.state       :290 ][INFO    ][3186] {'host': 'dbs02'}
2018-10-03 21:08:42,710 [salt.state       :1941][INFO    ][3186] Completed state [dbs02] at time 21:08:42.710116 duration_in_ms=2.197
2018-10-03 21:08:42,710 [salt.state       :1770][INFO    ][3186] Running state [dbs02.mcp-ovs-ha.local] at time 21:08:42.710438
2018-10-03 21:08:42,710 [salt.state       :1803][INFO    ][3186] Executing state host.present for [dbs02.mcp-ovs-ha.local]
2018-10-03 21:08:42,712 [salt.state       :290 ][INFO    ][3186] {'host': 'dbs02.mcp-ovs-ha.local'}
2018-10-03 21:08:42,712 [salt.state       :1941][INFO    ][3186] Completed state [dbs02.mcp-ovs-ha.local] at time 21:08:42.712582 duration_in_ms=2.145
2018-10-03 21:08:42,713 [salt.state       :1770][INFO    ][3186] Running state [dbs03] at time 21:08:42.713496
2018-10-03 21:08:42,714 [salt.state       :1803][INFO    ][3186] Executing state host.present for [dbs03]
2018-10-03 21:08:42,723 [salt.state       :290 ][INFO    ][3186] {'host': 'dbs03'}
2018-10-03 21:08:42,723 [salt.state       :1941][INFO    ][3186] Completed state [dbs03] at time 21:08:42.723398 duration_in_ms=9.902
2018-10-03 21:08:42,723 [salt.state       :1770][INFO    ][3186] Running state [dbs03.mcp-ovs-ha.local] at time 21:08:42.723769
2018-10-03 21:08:42,724 [salt.state       :1803][INFO    ][3186] Executing state host.present for [dbs03.mcp-ovs-ha.local]
2018-10-03 21:08:42,725 [salt.state       :290 ][INFO    ][3186] {'host': 'dbs03.mcp-ovs-ha.local'}
2018-10-03 21:08:42,725 [salt.state       :1941][INFO    ][3186] Completed state [dbs03.mcp-ovs-ha.local] at time 21:08:42.725771 duration_in_ms=2.002
2018-10-03 21:08:42,726 [salt.state       :1770][INFO    ][3186] Running state [mas01] at time 21:08:42.726132
2018-10-03 21:08:42,726 [salt.state       :1803][INFO    ][3186] Executing state host.present for [mas01]
2018-10-03 21:08:42,727 [salt.state       :290 ][INFO    ][3186] {'host': 'mas01'}
2018-10-03 21:08:42,728 [salt.state       :1941][INFO    ][3186] Completed state [mas01] at time 21:08:42.727912 duration_in_ms=1.78
2018-10-03 21:08:42,728 [salt.state       :1770][INFO    ][3186] Running state [mas01.mcp-ovs-ha.local] at time 21:08:42.728770
2018-10-03 21:08:42,729 [salt.state       :1803][INFO    ][3186] Executing state host.present for [mas01.mcp-ovs-ha.local]
2018-10-03 21:08:42,730 [salt.state       :290 ][INFO    ][3186] {'host': 'mas01.mcp-ovs-ha.local'}
2018-10-03 21:08:42,730 [salt.state       :1941][INFO    ][3186] Completed state [mas01.mcp-ovs-ha.local] at time 21:08:42.730885 duration_in_ms=2.115
2018-10-03 21:08:42,731 [salt.state       :1770][INFO    ][3186] Running state [ctl02] at time 21:08:42.731235
2018-10-03 21:08:42,731 [salt.state       :1803][INFO    ][3186] Executing state host.present for [ctl02]
2018-10-03 21:08:42,733 [salt.state       :290 ][INFO    ][3186] {'host': 'ctl02'}
2018-10-03 21:08:42,733 [salt.state       :1941][INFO    ][3186] Completed state [ctl02] at time 21:08:42.733345 duration_in_ms=2.11
2018-10-03 21:08:42,734 [salt.state       :1770][INFO    ][3186] Running state [ctl02.mcp-ovs-ha.local] at time 21:08:42.733968
2018-10-03 21:08:42,734 [salt.state       :1803][INFO    ][3186] Executing state host.present for [ctl02.mcp-ovs-ha.local]
2018-10-03 21:08:42,736 [salt.state       :290 ][INFO    ][3186] {'host': 'ctl02.mcp-ovs-ha.local'}
2018-10-03 21:08:42,736 [salt.state       :1941][INFO    ][3186] Completed state [ctl02.mcp-ovs-ha.local] at time 21:08:42.736661 duration_in_ms=2.692
2018-10-03 21:08:42,737 [salt.state       :1770][INFO    ][3186] Running state [ctl03] at time 21:08:42.736983
2018-10-03 21:08:42,737 [salt.state       :1803][INFO    ][3186] Executing state host.present for [ctl03]
2018-10-03 21:08:42,738 [salt.state       :290 ][INFO    ][3186] {'host': 'ctl03'}
2018-10-03 21:08:42,738 [salt.state       :1941][INFO    ][3186] Completed state [ctl03] at time 21:08:42.738505 duration_in_ms=1.522
2018-10-03 21:08:42,738 [salt.state       :1770][INFO    ][3186] Running state [ctl03.mcp-ovs-ha.local] at time 21:08:42.738832
2018-10-03 21:08:42,739 [salt.state       :1803][INFO    ][3186] Executing state host.present for [ctl03.mcp-ovs-ha.local]
2018-10-03 21:08:42,740 [salt.state       :290 ][INFO    ][3186] {'host': 'ctl03.mcp-ovs-ha.local'}
2018-10-03 21:08:42,740 [salt.state       :1941][INFO    ][3186] Completed state [ctl03.mcp-ovs-ha.local] at time 21:08:42.740341 duration_in_ms=1.509
2018-10-03 21:08:42,740 [salt.state       :1770][INFO    ][3186] Running state [ctl01] at time 21:08:42.740674
2018-10-03 21:08:42,741 [salt.state       :1803][INFO    ][3186] Executing state host.present for [ctl01]
2018-10-03 21:08:42,743 [salt.state       :290 ][INFO    ][3186] {'host': 'ctl01'}
2018-10-03 21:08:42,743 [salt.state       :1941][INFO    ][3186] Completed state [ctl01] at time 21:08:42.743495 duration_in_ms=2.821
2018-10-03 21:08:42,744 [salt.state       :1770][INFO    ][3186] Running state [ctl01.mcp-ovs-ha.local] at time 21:08:42.744170
2018-10-03 21:08:42,744 [salt.state       :1803][INFO    ][3186] Executing state host.present for [ctl01.mcp-ovs-ha.local]
2018-10-03 21:08:42,745 [salt.state       :290 ][INFO    ][3186] {'host': 'ctl01.mcp-ovs-ha.local'}
2018-10-03 21:08:42,746 [salt.state       :1941][INFO    ][3186] Completed state [ctl01.mcp-ovs-ha.local] at time 21:08:42.746186 duration_in_ms=2.016
2018-10-03 21:08:42,746 [salt.state       :1770][INFO    ][3186] Running state [ctl] at time 21:08:42.746806
2018-10-03 21:08:42,747 [salt.state       :1803][INFO    ][3186] Executing state host.present for [ctl]
2018-10-03 21:08:42,748 [salt.state       :290 ][INFO    ][3186] {'host': 'ctl'}
2018-10-03 21:08:42,749 [salt.state       :1941][INFO    ][3186] Completed state [ctl] at time 21:08:42.749279 duration_in_ms=2.473
2018-10-03 21:08:42,749 [salt.state       :1770][INFO    ][3186] Running state [ctl.mcp-ovs-ha.local] at time 21:08:42.749611
2018-10-03 21:08:42,750 [salt.state       :1803][INFO    ][3186] Executing state host.present for [ctl.mcp-ovs-ha.local]
2018-10-03 21:08:42,751 [salt.state       :290 ][INFO    ][3186] {'host': 'ctl.mcp-ovs-ha.local'}
2018-10-03 21:08:42,753 [salt.state       :1941][INFO    ][3186] Completed state [ctl.mcp-ovs-ha.local] at time 21:08:42.753687 duration_in_ms=4.076
2018-10-03 21:08:42,753 [salt.state       :1770][INFO    ][3186] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 21:08:42.753917
2018-10-03 21:08:42,754 [salt.state       :1803][INFO    ][3186] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-10-03 21:08:42,754 [salt.state       :290 ][INFO    ][3186] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-10-03 21:08:42,754 [salt.state       :1941][INFO    ][3186] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 21:08:42.754731 duration_in_ms=0.813
2018-10-03 21:08:42,756 [salt.state       :1770][INFO    ][3186] Running state [ens3] at time 21:08:42.756695
2018-10-03 21:08:42,756 [salt.state       :1803][INFO    ][3186] Executing state network.managed for [ens3]
2018-10-03 21:08:42,951 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['ifup', 'ens3'] in directory '/root'
2018-10-03 21:08:43,930 [salt.state       :290 ][INFO    ][3186] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-10-03 21:08:43,932 [salt.state       :1941][INFO    ][3186] Completed state [ens3] at time 21:08:43.932428 duration_in_ms=1175.732
2018-10-03 21:08:43,933 [salt.state       :1770][INFO    ][3186] Running state [ens2] at time 21:08:43.933637
2018-10-03 21:08:43,934 [salt.state       :1803][INFO    ][3186] Executing state network.managed for [ens2]
2018-10-03 21:08:43,970 [salt.state       :290 ][INFO    ][3186] {'interface': 'Added network interface.'}
2018-10-03 21:08:43,971 [salt.state       :1941][INFO    ][3186] Completed state [ens2] at time 21:08:43.971390 duration_in_ms=37.752
2018-10-03 21:08:43,972 [salt.state       :1770][INFO    ][3186] Running state [linux_system_network] at time 21:08:43.972320
2018-10-03 21:08:43,972 [salt.state       :1803][INFO    ][3186] Executing state network.system for [linux_system_network]
2018-10-03 21:08:43,975 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-10-03 21:08:44,000 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-10-03 21:08:44,034 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-10-03 21:08:44,061 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-10-03 21:08:44,696 [salt.loaded.int.module.debian_ip:1970][WARNING ][3186] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-10-03 21:08:44,697 [salt.state       :290 ][INFO    ][3186] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb02\n\n+DOMAIN=mcp-ovs-ha.local\n\n+SEARCH=maas\n'}
2018-10-03 21:08:44,697 [salt.state       :1941][INFO    ][3186] Completed state [linux_system_network] at time 21:08:44.697743 duration_in_ms=725.423
2018-10-03 21:08:44,698 [salt.state       :1770][INFO    ][3186] Running state [/etc/profile.d/proxy.sh] at time 21:08:44.698358
2018-10-03 21:08:44,698 [salt.state       :1803][INFO    ][3186] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-10-03 21:08:44,700 [salt.state       :290 ][INFO    ][3186] File /etc/profile.d/proxy.sh is not present
2018-10-03 21:08:44,700 [salt.state       :1941][INFO    ][3186] Completed state [/etc/profile.d/proxy.sh] at time 21:08:44.700490 duration_in_ms=2.132
2018-10-03 21:08:44,701 [salt.state       :1770][INFO    ][3186] Running state [/etc/apt/apt.conf.d/95proxies] at time 21:08:44.701270
2018-10-03 21:08:44,701 [salt.state       :1803][INFO    ][3186] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-10-03 21:08:44,702 [salt.state       :290 ][INFO    ][3186] File /etc/apt/apt.conf.d/95proxies is not present
2018-10-03 21:08:44,703 [salt.state       :1941][INFO    ][3186] Completed state [/etc/apt/apt.conf.d/95proxies] at time 21:08:44.703033 duration_in_ms=1.762
2018-10-03 21:08:44,706 [salt.state       :1770][INFO    ][3186] Running state [ntp] at time 21:08:44.706445
2018-10-03 21:08:44,706 [salt.state       :1803][INFO    ][3186] Executing state pkg.installed for [ntp]
2018-10-03 21:08:45,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 21:08:45,045 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-10-03 21:08:47,638 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003210847625295
2018-10-03 21:08:47,670 [salt.minion      :1431][INFO    ][6447] Starting a new job with PID 6447
2018-10-03 21:08:47,708 [salt.minion      :1708][INFO    ][6447] Returning information for job: 20181003210847625295
2018-10-03 21:08:49,237 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:08:49,283 [salt.state       :290 ][INFO    ][3186] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-10-03 21:08:49,299 [salt.state       :905 ][INFO    ][3186] Loading fresh modules for state activity
2018-10-03 21:08:49,338 [salt.state       :1941][INFO    ][3186] Completed state [ntp] at time 21:08:49.338416 duration_in_ms=4631.971
2018-10-03 21:08:49,342 [salt.state       :1770][INFO    ][3186] Running state [/etc/ntp.conf] at time 21:08:49.342683
2018-10-03 21:08:49,342 [salt.state       :1803][INFO    ][3186] Executing state file.managed for [/etc/ntp.conf]
2018-10-03 21:08:49,366 [salt.fileclient  :1215][INFO    ][3186] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-10-03 21:08:49,440 [salt.state       :290 ][INFO    ][3186] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-10-03 21:08:49,442 [salt.state       :1941][INFO    ][3186] Completed state [/etc/ntp.conf] at time 21:08:49.442295 duration_in_ms=99.612
2018-10-03 21:08:49,886 [salt.state       :1770][INFO    ][3186] Running state [ntp] at time 21:08:49.886251
2018-10-03 21:08:49,886 [salt.state       :1803][INFO    ][3186] Executing state service.running for [ntp]
2018-10-03 21:08:49,887 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-10-03 21:08:49,905 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-03 21:08:49,927 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-10-03 21:08:49,949 [salt.state       :290 ][INFO    ][3186] The service ntp is already running
2018-10-03 21:08:49,950 [salt.state       :1941][INFO    ][3186] Completed state [ntp] at time 21:08:49.950184 duration_in_ms=63.934
2018-10-03 21:08:49,950 [salt.state       :1770][INFO    ][3186] Running state [ntp] at time 21:08:49.950846
2018-10-03 21:08:49,951 [salt.state       :1803][INFO    ][3186] Executing state service.mod_watch for [ntp]
2018-10-03 21:08:49,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-03 21:08:49,975 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3186] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-10-03 21:08:50,064 [salt.state       :290 ][INFO    ][3186] {'ntp': True}
2018-10-03 21:08:50,064 [salt.state       :1941][INFO    ][3186] Completed state [ntp] at time 21:08:50.064660 duration_in_ms=113.813
2018-10-03 21:08:50,074 [salt.minion      :1708][INFO    ][3186] Returning information for job: 20181003210801884730
2018-10-03 21:09:00,178 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181003210900166379
2018-10-03 21:09:00,203 [salt.minion      :1431][INFO    ][6627] Starting a new job with PID 6627
2018-10-03 21:09:00,227 [salt.minion      :1708][INFO    ][6627] Returning information for job: 20181003210900166379
2018-10-03 21:09:17,529 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command pkg.upgrade with jid 20181003210917514953
2018-10-03 21:09:17,549 [salt.minion      :1431][INFO    ][6642] Starting a new job with PID 6642
2018-10-03 21:09:17,575 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6642] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:09:18,007 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6642] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-10-03 21:09:22,636 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003210922617027
2018-10-03 21:09:22,666 [salt.minion      :1431][INFO    ][6677] Starting a new job with PID 6677
2018-10-03 21:09:22,697 [salt.minion      :1708][INFO    ][6677] Returning information for job: 20181003210922617027
2018-10-03 21:09:32,674 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003210932658502
2018-10-03 21:09:32,694 [salt.minion      :1431][INFO    ][6708] Starting a new job with PID 6708
2018-10-03 21:09:32,721 [salt.minion      :1708][INFO    ][6708] Returning information for job: 20181003210932658502
2018-10-03 21:09:42,816 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003210942802987
2018-10-03 21:09:42,852 [salt.minion      :1431][INFO    ][6835] Starting a new job with PID 6835
2018-10-03 21:09:42,888 [salt.minion      :1708][INFO    ][6835] Returning information for job: 20181003210942802987
2018-10-03 21:09:52,873 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003210952857867
2018-10-03 21:09:52,897 [salt.minion      :1431][INFO    ][6867] Starting a new job with PID 6867
2018-10-03 21:09:52,925 [salt.minion      :1708][INFO    ][6867] Returning information for job: 20181003210952857867
2018-10-03 21:10:02,919 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003211002903416
2018-10-03 21:10:02,943 [salt.minion      :1431][INFO    ][6872] Starting a new job with PID 6872
2018-10-03 21:10:02,989 [salt.minion      :1708][INFO    ][6872] Returning information for job: 20181003211002903416
2018-10-03 21:10:13,027 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003211013012363
2018-10-03 21:10:13,051 [salt.minion      :1431][INFO    ][6904] Starting a new job with PID 6904
2018-10-03 21:10:13,081 [salt.minion      :1708][INFO    ][6904] Returning information for job: 20181003211013012363
2018-10-03 21:10:23,148 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003211023132883
2018-10-03 21:10:23,181 [salt.minion      :1431][INFO    ][6936] Starting a new job with PID 6936
2018-10-03 21:10:23,212 [salt.minion      :1708][INFO    ][6936] Returning information for job: 20181003211023132883
2018-10-03 21:10:33,215 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003211033202533
2018-10-03 21:10:33,236 [salt.minion      :1431][INFO    ][7182] Starting a new job with PID 7182
2018-10-03 21:10:33,266 [salt.minion      :1708][INFO    ][7182] Returning information for job: 20181003211033202533
2018-10-03 21:10:43,242 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003211043230795
2018-10-03 21:10:43,262 [salt.minion      :1431][INFO    ][7833] Starting a new job with PID 7833
2018-10-03 21:10:43,288 [salt.minion      :1708][INFO    ][7833] Returning information for job: 20181003211043230795
2018-10-03 21:10:53,264 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003211053255033
2018-10-03 21:10:53,291 [salt.minion      :1431][INFO    ][11752] Starting a new job with PID 11752
2018-10-03 21:10:53,313 [salt.minion      :1708][INFO    ][11752] Returning information for job: 20181003211053255033
2018-10-03 21:11:03,439 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003211103425805
2018-10-03 21:11:03,458 [salt.minion      :1431][INFO    ][13931] Starting a new job with PID 13931
2018-10-03 21:11:03,506 [salt.minion      :1708][INFO    ][13931] Returning information for job: 20181003211103425805
2018-10-03 21:11:13,489 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003211113474936
2018-10-03 21:11:13,512 [salt.minion      :1431][INFO    ][18369] Starting a new job with PID 18369
2018-10-03 21:11:13,540 [salt.minion      :1708][INFO    ][18369] Returning information for job: 20181003211113474936
2018-10-03 21:11:23,531 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003211123519473
2018-10-03 21:11:23,556 [salt.minion      :1431][INFO    ][21426] Starting a new job with PID 21426
2018-10-03 21:11:23,584 [salt.minion      :1708][INFO    ][21426] Returning information for job: 20181003211123519473
2018-10-03 21:11:33,589 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003211133575521
2018-10-03 21:11:33,618 [salt.minion      :1431][INFO    ][22754] Starting a new job with PID 22754
2018-10-03 21:11:33,642 [salt.minion      :1708][INFO    ][22754] Returning information for job: 20181003211133575521
2018-10-03 21:11:35,516 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6642] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:11:35,556 [salt.minion      :1708][INFO    ][6642] Returning information for job: 20181003210917514953
2018-10-03 21:12:17,850 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command test.ping with jid 20181003211217842798
2018-10-03 21:12:17,876 [salt.minion      :1431][INFO    ][23466] Starting a new job with PID 23466
2018-10-03 21:12:17,905 [salt.minion      :1708][INFO    ][23466] Returning information for job: 20181003211217842798
2018-10-03 21:13:05,627 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.sls with jid 20181003211305612904
2018-10-03 21:13:05,647 [salt.minion      :1431][INFO    ][23550] Starting a new job with PID 23550
2018-10-03 21:13:06,708 [salt.state       :905 ][INFO    ][23550] Loading fresh modules for state activity
2018-10-03 21:13:06,764 [salt.fileclient  :1215][INFO    ][23550] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-10-03 21:13:06,800 [salt.fileclient  :1215][INFO    ][23550] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-10-03 21:13:07,452 [salt.state       :1770][INFO    ][23550] Running state [keepalived] at time 21:13:07.451971
2018-10-03 21:13:07,452 [salt.state       :1803][INFO    ][23550] Executing state pkg.installed for [keepalived]
2018-10-03 21:13:07,453 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:13:07,882 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-10-03 21:13:08,028 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 21:13:09,740 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 21:13:09,770 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-10-03 21:13:10,709 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003211310689657
2018-10-03 21:13:10,721 [salt.minion      :1431][INFO    ][23998] Starting a new job with PID 23998
2018-10-03 21:13:10,739 [salt.minion      :1708][INFO    ][23998] Returning information for job: 20181003211310689657
2018-10-03 21:13:14,102 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:13:14,150 [salt.state       :290 ][INFO    ][23550] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-10-03 21:13:14,170 [salt.state       :905 ][INFO    ][23550] Loading fresh modules for state activity
2018-10-03 21:13:14,203 [salt.state       :1941][INFO    ][23550] Completed state [keepalived] at time 21:13:14.203809 duration_in_ms=6751.839
2018-10-03 21:13:14,208 [salt.state       :1770][INFO    ][23550] Running state [lsof] at time 21:13:14.208871
2018-10-03 21:13:14,209 [salt.state       :1803][INFO    ][23550] Executing state pkg.installed for [lsof]
2018-10-03 21:13:14,795 [salt.state       :290 ][INFO    ][23550] All specified packages are already installed
2018-10-03 21:13:14,796 [salt.state       :1941][INFO    ][23550] Completed state [lsof] at time 21:13:14.796256 duration_in_ms=587.384
2018-10-03 21:13:14,798 [salt.state       :1770][INFO    ][23550] Running state [/etc/keepalived/keepalived.conf] at time 21:13:14.798853
2018-10-03 21:13:14,799 [salt.state       :1803][INFO    ][23550] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-03 21:13:14,834 [salt.fileclient  :1215][INFO    ][23550] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-10-03 21:13:14,887 [salt.state       :290 ][INFO    ][23550] File changed:
New file
2018-10-03 21:13:14,887 [salt.state       :1941][INFO    ][23550] Completed state [/etc/keepalived/keepalived.conf] at time 21:13:14.887912 duration_in_ms=89.059
2018-10-03 21:13:14,889 [salt.state       :1770][INFO    ][23550] Running state [keepalived] at time 21:13:14.889276
2018-10-03 21:13:14,889 [salt.state       :1803][INFO    ][23550] Executing state service.running for [keepalived]
2018-10-03 21:13:14,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-03 21:13:14,914 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-03 21:13:14,934 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-03 21:13:14,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-10-03 21:13:15,011 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-03 21:13:15,025 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-03 21:13:15,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23550] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-03 21:13:15,063 [salt.state       :290 ][INFO    ][23550] {'keepalived': True}
2018-10-03 21:13:15,063 [salt.state       :1941][INFO    ][23550] Completed state [keepalived] at time 21:13:15.063790 duration_in_ms=174.513
2018-10-03 21:13:15,066 [salt.minion      :1708][INFO    ][23550] Returning information for job: 20181003211305612904
2018-10-03 21:16:34,071 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command pillar.get with jid 20181003211634061815
2018-10-03 21:16:34,101 [salt.minion      :1431][INFO    ][24908] Starting a new job with PID 24908
2018-10-03 21:16:34,113 [salt.minion      :1708][INFO    ][24908] Returning information for job: 20181003211634061815
2018-10-03 21:29:39,645 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.sls with jid 20181003212939634121
2018-10-03 21:29:39,671 [salt.minion      :1431][INFO    ][24976] Starting a new job with PID 24976
2018-10-03 21:29:44,838 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003212944826489
2018-10-03 21:29:44,859 [salt.minion      :1431][INFO    ][24981] Starting a new job with PID 24981
2018-10-03 21:29:44,876 [salt.minion      :1708][INFO    ][24981] Returning information for job: 20181003212944826489
2018-10-03 21:29:48,977 [salt.state       :905 ][INFO    ][24976] Loading fresh modules for state activity
2018-10-03 21:29:50,252 [salt.fileclient  :1215][INFO    ][24976] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-10-03 21:29:50,289 [salt.fileclient  :1215][INFO    ][24976] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-10-03 21:29:50,323 [salt.fileclient  :1215][INFO    ][24976] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-10-03 21:29:50,936 [salt.state       :1770][INFO    ][24976] Running state [memcached] at time 21:29:50.936498
2018-10-03 21:29:50,936 [salt.state       :1803][INFO    ][24976] Executing state pkg.installed for [memcached]
2018-10-03 21:29:50,938 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:29:51,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-10-03 21:29:51,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 21:29:53,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 21:29:53,377 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-10-03 21:29:55,026 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003212955006899
2018-10-03 21:29:55,043 [salt.minion      :1431][INFO    ][25601] Starting a new job with PID 25601
2018-10-03 21:29:55,060 [salt.minion      :1708][INFO    ][25601] Returning information for job: 20181003212955006899
2018-10-03 21:29:56,797 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:29:56,844 [salt.state       :290 ][INFO    ][24976] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-10-03 21:29:56,862 [salt.state       :905 ][INFO    ][24976] Loading fresh modules for state activity
2018-10-03 21:29:56,898 [salt.state       :1941][INFO    ][24976] Completed state [memcached] at time 21:29:56.898235 duration_in_ms=5961.738
2018-10-03 21:29:56,903 [salt.state       :1770][INFO    ][24976] Running state [python-memcache] at time 21:29:56.903861
2018-10-03 21:29:56,904 [salt.state       :1803][INFO    ][24976] Executing state pkg.installed for [python-memcache]
2018-10-03 21:29:57,599 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 21:29:57,630 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-10-03 21:29:59,455 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:29:59,493 [salt.state       :290 ][INFO    ][24976] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-10-03 21:29:59,511 [salt.state       :905 ][INFO    ][24976] Loading fresh modules for state activity
2018-10-03 21:29:59,544 [salt.state       :1941][INFO    ][24976] Completed state [python-memcache] at time 21:29:59.544777 duration_in_ms=2640.915
2018-10-03 21:29:59,549 [salt.state       :1770][INFO    ][24976] Running state [/etc/memcached.conf] at time 21:29:59.549235
2018-10-03 21:29:59,549 [salt.state       :1803][INFO    ][24976] Executing state file.managed for [/etc/memcached.conf]
2018-10-03 21:29:59,588 [salt.fileclient  :1215][INFO    ][24976] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-10-03 21:29:59,629 [salt.state       :290 ][INFO    ][24976] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-10-03 21:29:59,636 [salt.state       :1941][INFO    ][24976] Completed state [/etc/memcached.conf] at time 21:29:59.636270 duration_in_ms=87.034
2018-10-03 21:30:00,095 [salt.state       :1770][INFO    ][24976] Running state [memcached] at time 21:30:00.095042
2018-10-03 21:30:00,095 [salt.state       :1803][INFO    ][24976] Executing state service.running for [memcached]
2018-10-03 21:30:00,096 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-03 21:30:00,113 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-03 21:30:00,127 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-03 21:30:00,141 [salt.state       :290 ][INFO    ][24976] The service memcached is already running
2018-10-03 21:30:00,142 [salt.state       :1941][INFO    ][24976] Completed state [memcached] at time 21:30:00.142136 duration_in_ms=47.096
2018-10-03 21:30:00,142 [salt.state       :1770][INFO    ][24976] Running state [memcached] at time 21:30:00.142610
2018-10-03 21:30:00,143 [salt.state       :1803][INFO    ][24976] Executing state service.mod_watch for [memcached]
2018-10-03 21:30:00,144 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-03 21:30:00,164 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24976] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-10-03 21:30:00,192 [salt.state       :290 ][INFO    ][24976] {'memcached': True}
2018-10-03 21:30:00,192 [salt.state       :1941][INFO    ][24976] Completed state [memcached] at time 21:30:00.192376 duration_in_ms=49.765
2018-10-03 21:30:00,199 [salt.minion      :1708][INFO    ][24976] Returning information for job: 20181003212939634121
2018-10-03 21:30:04,163 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.sls with jid 20181003213004150829
2018-10-03 21:30:04,188 [salt.minion      :1431][INFO    ][25982] Starting a new job with PID 25982
2018-10-03 21:30:09,406 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003213009394287
2018-10-03 21:30:09,430 [salt.minion      :1431][INFO    ][25987] Starting a new job with PID 25987
2018-10-03 21:30:09,460 [salt.minion      :1708][INFO    ][25987] Returning information for job: 20181003213009394287
2018-10-03 21:30:12,621 [salt.state       :905 ][INFO    ][25982] Loading fresh modules for state activity
2018-10-03 21:30:13,981 [salt.fileclient  :1215][INFO    ][25982] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-10-03 21:30:14,008 [salt.fileclient  :1215][INFO    ][25982] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-10-03 21:30:14,681 [salt.state       :1770][INFO    ][25982] Running state [haproxy] at time 21:30:14.681542
2018-10-03 21:30:14,682 [salt.state       :1803][INFO    ][25982] Executing state pkg.installed for [haproxy]
2018-10-03 21:30:14,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:30:15,200 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-10-03 21:30:15,360 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 21:30:17,324 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 21:30:17,363 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-10-03 21:30:19,584 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003213019564333
2018-10-03 21:30:19,623 [salt.minion      :1431][INFO    ][26634] Starting a new job with PID 26634
2018-10-03 21:30:19,648 [salt.minion      :1708][INFO    ][26634] Returning information for job: 20181003213019564333
2018-10-03 21:30:21,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:30:21,675 [salt.state       :290 ][INFO    ][25982] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-10-03 21:30:21,704 [salt.state       :905 ][INFO    ][25982] Loading fresh modules for state activity
2018-10-03 21:30:21,751 [salt.state       :1941][INFO    ][25982] Completed state [haproxy] at time 21:30:21.751834 duration_in_ms=7070.293
2018-10-03 21:30:21,757 [salt.state       :1770][INFO    ][25982] Running state [/etc/default/haproxy] at time 21:30:21.756969
2018-10-03 21:30:21,757 [salt.state       :1803][INFO    ][25982] Executing state file.managed for [/etc/default/haproxy]
2018-10-03 21:30:21,801 [salt.fileclient  :1215][INFO    ][25982] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-10-03 21:30:21,806 [salt.state       :290 ][INFO    ][25982] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-10-03 21:30:21,806 [salt.state       :1941][INFO    ][25982] Completed state [/etc/default/haproxy] at time 21:30:21.806245 duration_in_ms=49.276
2018-10-03 21:30:21,806 [salt.state       :1770][INFO    ][25982] Running state [/etc/haproxy/haproxy.cfg] at time 21:30:21.806583
2018-10-03 21:30:21,807 [salt.state       :1803][INFO    ][25982] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-03 21:30:21,833 [salt.fileclient  :1215][INFO    ][25982] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-10-03 21:30:22,041 [salt.state       :290 ][INFO    ][25982] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-10-03 21:30:22,052 [salt.state       :1941][INFO    ][25982] Completed state [/etc/haproxy/haproxy.cfg] at time 21:30:22.052311 duration_in_ms=245.728
2018-10-03 21:30:22,053 [salt.state       :1770][INFO    ][25982] Running state [/etc/haproxy/ssl] at time 21:30:22.053769
2018-10-03 21:30:22,054 [salt.state       :1803][INFO    ][25982] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-03 21:30:22,056 [salt.state       :290 ][INFO    ][25982] {'/etc/haproxy/ssl': 'New Dir'}
2018-10-03 21:30:22,056 [salt.state       :1941][INFO    ][25982] Completed state [/etc/haproxy/ssl] at time 21:30:22.056317 duration_in_ms=2.548
2018-10-03 21:30:22,056 [salt.state       :1770][INFO    ][25982] Running state [/etc/haproxy/errors/429.http11] at time 21:30:22.056607
2018-10-03 21:30:22,057 [salt.state       :1803][INFO    ][25982] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-03 21:30:22,094 [salt.fileclient  :1215][INFO    ][25982] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-10-03 21:30:22,110 [salt.state       :290 ][INFO    ][25982] File changed:
New file
2018-10-03 21:30:22,111 [salt.state       :1941][INFO    ][25982] Completed state [/etc/haproxy/errors/429.http11] at time 21:30:22.111303 duration_in_ms=54.696
2018-10-03 21:30:22,113 [salt.state       :1770][INFO    ][25982] Running state [haproxy_status_packages] at time 21:30:22.113192
2018-10-03 21:30:22,113 [salt.state       :1803][INFO    ][25982] Executing state pkg.installed for [haproxy_status_packages]
2018-10-03 21:30:22,810 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 21:30:22,845 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-10-03 21:30:25,011 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:30:25,065 [salt.state       :290 ][INFO    ][25982] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-10-03 21:30:25,085 [salt.state       :905 ][INFO    ][25982] Loading fresh modules for state activity
2018-10-03 21:30:25,126 [salt.state       :1941][INFO    ][25982] Completed state [haproxy_status_packages] at time 21:30:25.126554 duration_in_ms=3013.361
2018-10-03 21:30:25,130 [salt.state       :1770][INFO    ][25982] Running state [/usr/bin/haproxy-status.sh] at time 21:30:25.130410
2018-10-03 21:30:25,131 [salt.state       :1803][INFO    ][25982] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-03 21:30:25,163 [salt.fileclient  :1215][INFO    ][25982] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-10-03 21:30:25,196 [salt.state       :290 ][INFO    ][25982] File changed:
New file
2018-10-03 21:30:25,197 [salt.state       :1941][INFO    ][25982] Completed state [/usr/bin/haproxy-status.sh] at time 21:30:25.197055 duration_in_ms=66.645
2018-10-03 21:30:25,200 [salt.state       :1770][INFO    ][25982] Running state [net.ipv4.ip_nonlocal_bind] at time 21:30:25.200545
2018-10-03 21:30:25,201 [salt.state       :1803][INFO    ][25982] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-03 21:30:25,208 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-10-03 21:30:25,224 [salt.state       :290 ][INFO    ][25982] {'net.ipv4.ip_nonlocal_bind': 1}
2018-10-03 21:30:25,225 [salt.state       :1941][INFO    ][25982] Completed state [net.ipv4.ip_nonlocal_bind] at time 21:30:25.225507 duration_in_ms=24.963
2018-10-03 21:30:25,673 [salt.state       :1770][INFO    ][25982] Running state [haproxy] at time 21:30:25.673763
2018-10-03 21:30:25,674 [salt.state       :1803][INFO    ][25982] Executing state service.running for [haproxy]
2018-10-03 21:30:25,675 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-03 21:30:25,698 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-03 21:30:25,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-03 21:30:25,734 [salt.state       :290 ][INFO    ][25982] The service haproxy is already running
2018-10-03 21:30:25,735 [salt.state       :1941][INFO    ][25982] Completed state [haproxy] at time 21:30:25.735333 duration_in_ms=61.569
2018-10-03 21:30:25,735 [salt.state       :1770][INFO    ][25982] Running state [haproxy] at time 21:30:25.735797
2018-10-03 21:30:25,736 [salt.state       :1803][INFO    ][25982] Executing state service.mod_watch for [haproxy]
2018-10-03 21:30:25,737 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-03 21:30:25,757 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25982] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-10-03 21:30:25,797 [salt.state       :290 ][INFO    ][25982] {'haproxy': True}
2018-10-03 21:30:25,798 [salt.state       :1941][INFO    ][25982] Completed state [haproxy] at time 21:30:25.798431 duration_in_ms=62.633
2018-10-03 21:30:25,800 [salt.minion      :1708][INFO    ][25982] Returning information for job: 20181003213004150829
2018-10-03 21:30:30,990 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command service.status with jid 20181003213030980380
2018-10-03 21:30:31,018 [salt.minion      :1431][INFO    ][27183] Starting a new job with PID 27183
2018-10-03 21:30:31,534 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27183] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-03 21:30:31,563 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27183] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-03 21:30:31,586 [salt.minion      :1708][INFO    ][27183] Returning information for job: 20181003213030980380
2018-10-03 21:30:32,815 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command service.restart with jid 20181003213032800767
2018-10-03 21:30:32,846 [salt.minion      :1431][INFO    ][27191] Starting a new job with PID 27191
2018-10-03 21:30:33,355 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27191] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-03 21:30:33,403 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27191] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-03 21:30:33,445 [salt.minion      :1708][INFO    ][27191] Returning information for job: 20181003213032800767
2018-10-03 21:49:00,822 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command test.ping with jid 20181003214900809057
2018-10-03 21:49:00,854 [salt.minion      :1431][INFO    ][27280] Starting a new job with PID 27280
2018-10-03 21:49:00,887 [salt.minion      :1708][INFO    ][27280] Returning information for job: 20181003214900809057
2018-10-03 21:49:13,329 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.sls with jid 20181003214913311986
2018-10-03 21:49:13,351 [salt.minion      :1431][INFO    ][27285] Starting a new job with PID 27285
2018-10-03 21:49:14,427 [salt.state       :905 ][INFO    ][27285] Loading fresh modules for state activity
2018-10-03 21:49:15,237 [salt.state       :1770][INFO    ][27285] Running state [keepalived] at time 21:49:15.237211
2018-10-03 21:49:15,237 [salt.state       :1803][INFO    ][27285] Executing state pkg.installed for [keepalived]
2018-10-03 21:49:15,238 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27285] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:49:15,663 [salt.state       :290 ][INFO    ][27285] All specified packages are already installed
2018-10-03 21:49:15,664 [salt.state       :1941][INFO    ][27285] Completed state [keepalived] at time 21:49:15.664109 duration_in_ms=426.898
2018-10-03 21:49:15,665 [salt.state       :1770][INFO    ][27285] Running state [lsof] at time 21:49:15.664983
2018-10-03 21:49:15,665 [salt.state       :1803][INFO    ][27285] Executing state pkg.installed for [lsof]
2018-10-03 21:49:15,675 [salt.state       :290 ][INFO    ][27285] All specified packages are already installed
2018-10-03 21:49:15,676 [salt.state       :1941][INFO    ][27285] Completed state [lsof] at time 21:49:15.676250 duration_in_ms=11.266
2018-10-03 21:49:15,679 [salt.state       :1770][INFO    ][27285] Running state [/etc/keepalived/keepalived.conf] at time 21:49:15.679620
2018-10-03 21:49:15,680 [salt.state       :1803][INFO    ][27285] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-03 21:49:15,762 [salt.state       :290 ][INFO    ][27285] File /etc/keepalived/keepalived.conf is in the correct state
2018-10-03 21:49:15,763 [salt.state       :1941][INFO    ][27285] Completed state [/etc/keepalived/keepalived.conf] at time 21:49:15.763171 duration_in_ms=83.551
2018-10-03 21:49:15,764 [salt.state       :1770][INFO    ][27285] Running state [keepalived] at time 21:49:15.764063
2018-10-03 21:49:15,764 [salt.state       :1803][INFO    ][27285] Executing state service.running for [keepalived]
2018-10-03 21:49:15,765 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27285] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-03 21:49:15,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27285] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-03 21:49:15,837 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27285] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-03 21:49:15,858 [salt.state       :290 ][INFO    ][27285] The service keepalived is already running
2018-10-03 21:49:15,860 [salt.state       :1941][INFO    ][27285] Completed state [keepalived] at time 21:49:15.859849 duration_in_ms=95.784
2018-10-03 21:49:15,864 [salt.minion      :1708][INFO    ][27285] Returning information for job: 20181003214913311986
2018-10-03 21:50:14,672 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command pillar.get with jid 20181003215014660835
2018-10-03 21:50:14,700 [salt.minion      :1431][INFO    ][27311] Starting a new job with PID 27311
2018-10-03 21:50:14,710 [salt.minion      :1708][INFO    ][27311] Returning information for job: 20181003215014660835
2018-10-03 21:53:04,284 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.sls with jid 20181003215304274439
2018-10-03 21:53:04,306 [salt.minion      :1431][INFO    ][27326] Starting a new job with PID 27326
2018-10-03 21:53:05,765 [salt.state       :905 ][INFO    ][27326] Loading fresh modules for state activity
2018-10-03 21:53:08,040 [salt.state       :1770][INFO    ][27326] Running state [memcached] at time 21:53:08.040346
2018-10-03 21:53:08,041 [salt.state       :1803][INFO    ][27326] Executing state pkg.installed for [memcached]
2018-10-03 21:53:08,041 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27326] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:53:08,444 [salt.state       :290 ][INFO    ][27326] All specified packages are already installed
2018-10-03 21:53:08,444 [salt.state       :1941][INFO    ][27326] Completed state [memcached] at time 21:53:08.444486 duration_in_ms=404.14
2018-10-03 21:53:08,444 [salt.state       :1770][INFO    ][27326] Running state [python-memcache] at time 21:53:08.444805
2018-10-03 21:53:08,445 [salt.state       :1803][INFO    ][27326] Executing state pkg.installed for [python-memcache]
2018-10-03 21:53:08,453 [salt.state       :290 ][INFO    ][27326] All specified packages are already installed
2018-10-03 21:53:08,453 [salt.state       :1941][INFO    ][27326] Completed state [python-memcache] at time 21:53:08.453530 duration_in_ms=8.724
2018-10-03 21:53:08,456 [salt.state       :1770][INFO    ][27326] Running state [/etc/memcached.conf] at time 21:53:08.456889
2018-10-03 21:53:08,457 [salt.state       :1803][INFO    ][27326] Executing state file.managed for [/etc/memcached.conf]
2018-10-03 21:53:08,517 [salt.state       :290 ][INFO    ][27326] File /etc/memcached.conf is in the correct state
2018-10-03 21:53:08,517 [salt.state       :1941][INFO    ][27326] Completed state [/etc/memcached.conf] at time 21:53:08.517806 duration_in_ms=60.917
2018-10-03 21:53:08,518 [salt.state       :1770][INFO    ][27326] Running state [memcached] at time 21:53:08.518604
2018-10-03 21:53:08,518 [salt.state       :1803][INFO    ][27326] Executing state service.running for [memcached]
2018-10-03 21:53:08,519 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27326] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-03 21:53:08,563 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27326] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-03 21:53:08,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27326] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-03 21:53:08,599 [salt.state       :290 ][INFO    ][27326] The service memcached is already running
2018-10-03 21:53:08,600 [salt.state       :1941][INFO    ][27326] Completed state [memcached] at time 21:53:08.599970 duration_in_ms=81.366
2018-10-03 21:53:08,601 [salt.minion      :1708][INFO    ][27326] Returning information for job: 20181003215304274439
2018-10-03 21:53:11,037 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.sls with jid 20181003215311024702
2018-10-03 21:53:11,066 [salt.minion      :1431][INFO    ][27352] Starting a new job with PID 27352
2018-10-03 21:53:16,575 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003215316562023
2018-10-03 21:53:16,603 [salt.minion      :1431][INFO    ][27357] Starting a new job with PID 27357
2018-10-03 21:53:16,624 [salt.minion      :1708][INFO    ][27357] Returning information for job: 20181003215316562023
2018-10-03 21:53:22,972 [salt.state       :905 ][INFO    ][27352] Loading fresh modules for state activity
2018-10-03 21:53:23,880 [salt.state       :1770][INFO    ][27352] Running state [haproxy] at time 21:53:23.880427
2018-10-03 21:53:23,881 [salt.state       :1803][INFO    ][27352] Executing state pkg.installed for [haproxy]
2018-10-03 21:53:23,883 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27352] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 21:53:24,312 [salt.state       :290 ][INFO    ][27352] All specified packages are already installed
2018-10-03 21:53:24,313 [salt.state       :1941][INFO    ][27352] Completed state [haproxy] at time 21:53:24.313202 duration_in_ms=432.776
2018-10-03 21:53:24,317 [salt.state       :1770][INFO    ][27352] Running state [/etc/default/haproxy] at time 21:53:24.317255
2018-10-03 21:53:24,317 [salt.state       :1803][INFO    ][27352] Executing state file.managed for [/etc/default/haproxy]
2018-10-03 21:53:24,337 [salt.state       :290 ][INFO    ][27352] File /etc/default/haproxy is in the correct state
2018-10-03 21:53:24,338 [salt.state       :1941][INFO    ][27352] Completed state [/etc/default/haproxy] at time 21:53:24.338119 duration_in_ms=20.864
2018-10-03 21:53:24,338 [salt.state       :1770][INFO    ][27352] Running state [/etc/haproxy/haproxy.cfg] at time 21:53:24.338606
2018-10-03 21:53:24,339 [salt.state       :1803][INFO    ][27352] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-03 21:53:24,539 [salt.state       :290 ][INFO    ][27352] File /etc/haproxy/haproxy.cfg is in the correct state
2018-10-03 21:53:24,540 [salt.state       :1941][INFO    ][27352] Completed state [/etc/haproxy/haproxy.cfg] at time 21:53:24.539960 duration_in_ms=201.354
2018-10-03 21:53:24,540 [salt.state       :1770][INFO    ][27352] Running state [/etc/haproxy/ssl] at time 21:53:24.540479
2018-10-03 21:53:24,540 [salt.state       :1803][INFO    ][27352] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-03 21:53:24,542 [salt.state       :290 ][INFO    ][27352] Directory /etc/haproxy/ssl is in the correct state
Directory /etc/haproxy/ssl updated
2018-10-03 21:53:24,542 [salt.state       :1941][INFO    ][27352] Completed state [/etc/haproxy/ssl] at time 21:53:24.542745 duration_in_ms=2.265
2018-10-03 21:53:24,543 [salt.state       :1770][INFO    ][27352] Running state [/etc/haproxy/errors/429.http11] at time 21:53:24.543179
2018-10-03 21:53:24,543 [salt.state       :1803][INFO    ][27352] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-03 21:53:24,571 [salt.state       :290 ][INFO    ][27352] File /etc/haproxy/errors/429.http11 is in the correct state
2018-10-03 21:53:24,572 [salt.state       :1941][INFO    ][27352] Completed state [/etc/haproxy/errors/429.http11] at time 21:53:24.572391 duration_in_ms=29.212
2018-10-03 21:53:24,573 [salt.state       :1770][INFO    ][27352] Running state [haproxy_status_packages] at time 21:53:24.572966
2018-10-03 21:53:24,574 [salt.state       :1803][INFO    ][27352] Executing state pkg.installed for [haproxy_status_packages]
2018-10-03 21:53:24,583 [salt.state       :290 ][INFO    ][27352] All specified packages are already installed
2018-10-03 21:53:24,584 [salt.state       :1941][INFO    ][27352] Completed state [haproxy_status_packages] at time 21:53:24.583968 duration_in_ms=11.002
2018-10-03 21:53:24,584 [salt.state       :1770][INFO    ][27352] Running state [/usr/bin/haproxy-status.sh] at time 21:53:24.584892
2018-10-03 21:53:24,585 [salt.state       :1803][INFO    ][27352] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-03 21:53:24,634 [salt.state       :290 ][INFO    ][27352] File /usr/bin/haproxy-status.sh is in the correct state
2018-10-03 21:53:24,634 [salt.state       :1941][INFO    ][27352] Completed state [/usr/bin/haproxy-status.sh] at time 21:53:24.634473 duration_in_ms=49.58
2018-10-03 21:53:24,635 [salt.state       :1770][INFO    ][27352] Running state [net.ipv4.ip_nonlocal_bind] at time 21:53:24.635102
2018-10-03 21:53:24,636 [salt.state       :1803][INFO    ][27352] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-03 21:53:24,661 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27352] Executing command 'sysctl -n net.ipv4.ip_nonlocal_bind' in directory '/root'
2018-10-03 21:53:24,681 [salt.state       :290 ][INFO    ][27352] Sysctl value net.ipv4.ip_nonlocal_bind = 1 is already set
2018-10-03 21:53:24,682 [salt.state       :1941][INFO    ][27352] Completed state [net.ipv4.ip_nonlocal_bind] at time 21:53:24.682839 duration_in_ms=47.737
2018-10-03 21:53:24,686 [salt.state       :1770][INFO    ][27352] Running state [haproxy] at time 21:53:24.686411
2018-10-03 21:53:24,687 [salt.state       :1803][INFO    ][27352] Executing state service.running for [haproxy]
2018-10-03 21:53:24,689 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27352] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-03 21:53:24,708 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27352] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-03 21:53:24,728 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27352] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-03 21:53:24,750 [salt.state       :290 ][INFO    ][27352] The service haproxy is already running
2018-10-03 21:53:24,751 [salt.state       :1941][INFO    ][27352] Completed state [haproxy] at time 21:53:24.750984 duration_in_ms=64.573
2018-10-03 21:53:24,753 [salt.minion      :1708][INFO    ][27352] Returning information for job: 20181003215311024702
2018-10-03 21:53:26,432 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command service.status with jid 20181003215326421897
2018-10-03 21:53:26,456 [salt.minion      :1431][INFO    ][27388] Starting a new job with PID 27388
2018-10-03 21:53:26,975 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27388] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-03 21:53:27,003 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27388] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-03 21:53:27,023 [salt.minion      :1708][INFO    ][27388] Returning information for job: 20181003215326421897
2018-10-03 21:53:28,523 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command service.restart with jid 20181003215328505091
2018-10-03 21:53:28,551 [salt.minion      :1431][INFO    ][27396] Starting a new job with PID 27396
2018-10-03 21:53:29,094 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27396] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-03 21:53:29,131 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27396] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-03 21:53:29,181 [salt.minion      :1708][INFO    ][27396] Returning information for job: 20181003215328505091
2018-10-03 22:07:47,194 [salt.utils.schedule:1375][INFO    ][3092] Running scheduled job: __mine_interval
2018-10-03 22:18:21,477 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.sls with jid 20181003221821466338
2018-10-03 22:18:21,495 [salt.minion      :1431][INFO    ][27514] Starting a new job with PID 27514
2018-10-03 22:18:26,576 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003221826564431
2018-10-03 22:18:26,600 [salt.minion      :1431][INFO    ][27519] Starting a new job with PID 27519
2018-10-03 22:18:26,621 [salt.minion      :1708][INFO    ][27519] Returning information for job: 20181003221826564431
2018-10-03 22:18:29,523 [salt.state       :905 ][INFO    ][27514] Loading fresh modules for state activity
2018-10-03 22:18:29,680 [salt.fileclient  :1215][INFO    ][27514] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-10-03 22:18:29,718 [salt.fileclient  :1215][INFO    ][27514] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-10-03 22:18:29,750 [salt.fileclient  :1215][INFO    ][27514] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-10-03 22:18:29,797 [salt.fileclient  :1215][INFO    ][27514] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-10-03 22:18:30,631 [salt.state       :1770][INFO    ][27514] Running state [redis-server] at time 22:18:30.631791
2018-10-03 22:18:30,632 [salt.state       :1803][INFO    ][27514] Executing state pkg.installed for [redis-server]
2018-10-03 22:18:30,633 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:18:31,091 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-10-03 22:18:31,252 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 22:18:35,497 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:18:35,536 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-10-03 22:18:36,740 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003221836721197
2018-10-03 22:18:36,760 [salt.minion      :1431][INFO    ][28043] Starting a new job with PID 28043
2018-10-03 22:18:36,781 [salt.minion      :1708][INFO    ][28043] Returning information for job: 20181003221836721197
2018-10-03 22:18:39,650 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:18:39,702 [salt.state       :290 ][INFO    ][27514] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-10-03 22:18:39,730 [salt.state       :905 ][INFO    ][27514] Loading fresh modules for state activity
2018-10-03 22:18:39,775 [salt.state       :1941][INFO    ][27514] Completed state [redis-server] at time 22:18:39.775350 duration_in_ms=9143.56
2018-10-03 22:18:39,779 [salt.state       :1770][INFO    ][27514] Running state [vm.overcommit_memory] at time 22:18:39.779517
2018-10-03 22:18:39,779 [salt.state       :1803][INFO    ][27514] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-03 22:18:39,784 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-10-03 22:18:39,802 [salt.state       :290 ][INFO    ][27514] {'vm.overcommit_memory': 1}
2018-10-03 22:18:39,802 [salt.state       :1941][INFO    ][27514] Completed state [vm.overcommit_memory] at time 22:18:39.802848 duration_in_ms=23.33
2018-10-03 22:18:39,808 [salt.state       :1770][INFO    ][27514] Running state [/etc/redis/redis.conf] at time 22:18:39.808411
2018-10-03 22:18:39,808 [salt.state       :1803][INFO    ][27514] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-03 22:18:39,854 [salt.fileclient  :1215][INFO    ][27514] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-10-03 22:18:39,938 [salt.state       :290 ][INFO    ][27514] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.33
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -208,6 +208,7 @@
 #    and resynchronize with them.
 #
 # slaveof <masterip> <masterport>
+slaveof 192.168.10.32 6379
 
 # If the master is password protected (using the "requirepass" configuration
 # directive below) it is possible to tell the slave to authenticate before
@@ -505,7 +506,6 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
 appendonly no
 
 # The name of the append only file (default: "appendonly.aof")
@@ -535,9 +535,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-10-03 22:18:39,938 [salt.state       :1941][INFO    ][27514] Completed state [/etc/redis/redis.conf] at time 22:18:39.938510 duration_in_ms=130.099
2018-10-03 22:18:40,438 [salt.state       :1770][INFO    ][27514] Running state [redis-server] at time 22:18:40.438495
2018-10-03 22:18:40,438 [salt.state       :1803][INFO    ][27514] Executing state service.running for [redis-server]
2018-10-03 22:18:40,439 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-03 22:18:40,461 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-03 22:18:40,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-03 22:18:40,501 [salt.state       :290 ][INFO    ][27514] The service redis-server is already running
2018-10-03 22:18:40,501 [salt.state       :1941][INFO    ][27514] Completed state [redis-server] at time 22:18:40.501755 duration_in_ms=63.26
2018-10-03 22:18:40,502 [salt.state       :1770][INFO    ][27514] Running state [redis-server] at time 22:18:40.502045
2018-10-03 22:18:40,503 [salt.state       :1803][INFO    ][27514] Executing state service.mod_watch for [redis-server]
2018-10-03 22:18:40,504 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-03 22:18:40,526 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-10-03 22:18:40,888 [salt.state       :290 ][INFO    ][27514] {'redis-server': True}
2018-10-03 22:18:40,890 [salt.state       :1941][INFO    ][27514] Completed state [redis-server] at time 22:18:40.890772 duration_in_ms=388.726
2018-10-03 22:18:40,894 [salt.state       :1770][INFO    ][27514] Running state [redis-sentinel] at time 22:18:40.894189
2018-10-03 22:18:40,894 [salt.state       :1803][INFO    ][27514] Executing state pkg.installed for [redis-sentinel]
2018-10-03 22:18:41,162 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:18:41,194 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-10-03 22:18:44,630 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:18:44,679 [salt.state       :290 ][INFO    ][27514] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-10-03 22:18:44,700 [salt.state       :905 ][INFO    ][27514] Loading fresh modules for state activity
2018-10-03 22:18:44,744 [salt.state       :1941][INFO    ][27514] Completed state [redis-sentinel] at time 22:18:44.744097 duration_in_ms=3849.908
2018-10-03 22:18:45,254 [salt.state       :1770][INFO    ][27514] Running state [/etc/redis/sentinel.conf] at time 22:18:45.254722
2018-10-03 22:18:45,255 [salt.state       :1803][INFO    ][27514] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-03 22:18:45,284 [salt.fileclient  :1215][INFO    ][27514] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-10-03 22:18:45,327 [salt.state       :290 ][INFO    ][27514] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.33
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-10-03 22:18:45,328 [salt.state       :1941][INFO    ][27514] Completed state [/etc/redis/sentinel.conf] at time 22:18:45.328057 duration_in_ms=73.336
2018-10-03 22:18:45,328 [salt.state       :1770][INFO    ][27514] Running state [redis-sentinel] at time 22:18:45.328396
2018-10-03 22:18:45,328 [salt.state       :1803][INFO    ][27514] Executing state service.running for [redis-sentinel]
2018-10-03 22:18:45,329 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-03 22:18:45,351 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-03 22:18:45,375 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-03 22:18:45,406 [salt.state       :290 ][INFO    ][27514] The service redis-sentinel is already running
2018-10-03 22:18:45,407 [salt.state       :1941][INFO    ][27514] Completed state [redis-sentinel] at time 22:18:45.406995 duration_in_ms=78.599
2018-10-03 22:18:45,407 [salt.state       :1770][INFO    ][27514] Running state [redis-sentinel] at time 22:18:45.407446
2018-10-03 22:18:45,408 [salt.state       :1803][INFO    ][27514] Executing state service.mod_watch for [redis-sentinel]
2018-10-03 22:18:45,410 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-03 22:18:45,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27514] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-10-03 22:18:45,728 [salt.state       :290 ][INFO    ][27514] {'redis-sentinel': True}
2018-10-03 22:18:45,730 [salt.state       :1941][INFO    ][27514] Completed state [redis-sentinel] at time 22:18:45.729550 duration_in_ms=322.102
2018-10-03 22:18:45,734 [salt.minion      :1708][INFO    ][27514] Returning information for job: 20181003221821466338
2018-10-03 22:18:49,055 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command test.ping with jid 20181003221849044633
2018-10-03 22:18:49,081 [salt.minion      :1431][INFO    ][28828] Starting a new job with PID 28828
2018-10-03 22:18:49,102 [salt.minion      :1708][INFO    ][28828] Returning information for job: 20181003221849044633
2018-10-03 22:18:49,239 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.sls with jid 20181003221849223811
2018-10-03 22:18:49,265 [salt.minion      :1431][INFO    ][28833] Starting a new job with PID 28833
2018-10-03 22:18:54,262 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003221854250574
2018-10-03 22:18:54,282 [salt.minion      :1431][INFO    ][28838] Starting a new job with PID 28838
2018-10-03 22:18:54,301 [salt.minion      :1708][INFO    ][28838] Returning information for job: 20181003221854250574
2018-10-03 22:18:57,055 [salt.state       :905 ][INFO    ][28833] Loading fresh modules for state activity
2018-10-03 22:18:57,124 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-10-03 22:18:57,164 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-10-03 22:18:57,254 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-10-03 22:18:57,296 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-10-03 22:18:57,338 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-10-03 22:18:57,458 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-10-03 22:18:57,548 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-10-03 22:18:57,643 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-10-03 22:18:57,816 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-10-03 22:18:57,900 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-10-03 22:18:57,985 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-10-03 22:18:58,051 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-10-03 22:18:58,873 [salt.state       :1770][INFO    ][28833] Running state [apache2] at time 22:18:58.873346
2018-10-03 22:18:58,874 [salt.state       :1803][INFO    ][28833] Executing state pkg.installed for [apache2]
2018-10-03 22:18:58,874 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:18:59,305 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-10-03 22:18:59,476 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 22:19:01,638 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:19:01,681 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-10-03 22:19:04,367 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003221904352471
2018-10-03 22:19:04,386 [salt.minion      :1431][INFO    ][29836] Starting a new job with PID 29836
2018-10-03 22:19:04,411 [salt.minion      :1708][INFO    ][29836] Returning information for job: 20181003221904352471
2018-10-03 22:19:10,558 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:19:10,611 [salt.state       :290 ][INFO    ][28833] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-10-03 22:19:10,638 [salt.state       :905 ][INFO    ][28833] Loading fresh modules for state activity
2018-10-03 22:19:10,686 [salt.state       :1941][INFO    ][28833] Completed state [apache2] at time 22:19:10.686410 duration_in_ms=11813.065
2018-10-03 22:19:10,692 [salt.state       :1770][INFO    ][28833] Running state [openssl] at time 22:19:10.692160
2018-10-03 22:19:10,694 [salt.state       :1803][INFO    ][28833] Executing state pkg.installed for [openssl]
2018-10-03 22:19:11,495 [salt.state       :290 ][INFO    ][28833] All specified packages are already installed
2018-10-03 22:19:11,496 [salt.state       :1941][INFO    ][28833] Completed state [openssl] at time 22:19:11.496216 duration_in_ms=804.056
2018-10-03 22:19:11,497 [salt.state       :1770][INFO    ][28833] Running state [a2enmod rewrite] at time 22:19:11.497616
2018-10-03 22:19:11,498 [salt.state       :1803][INFO    ][28833] Executing state cmd.run for [a2enmod rewrite]
2018-10-03 22:19:11,499 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command 'a2enmod rewrite' in directory '/root'
2018-10-03 22:19:11,576 [salt.state       :290 ][INFO    ][28833] {'pid': 30360, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-03 22:19:11,577 [salt.state       :1941][INFO    ][28833] Completed state [a2enmod rewrite] at time 22:19:11.577247 duration_in_ms=79.63
2018-10-03 22:19:11,579 [salt.state       :1770][INFO    ][28833] Running state [libapache2-mod-wsgi] at time 22:19:11.579116
2018-10-03 22:19:11,579 [salt.state       :1803][INFO    ][28833] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-03 22:19:11,613 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:19:11,647 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-10-03 22:19:14,535 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003221914519298
2018-10-03 22:19:14,554 [salt.minion      :1431][INFO    ][30625] Starting a new job with PID 30625
2018-10-03 22:19:14,573 [salt.minion      :1708][INFO    ][30625] Returning information for job: 20181003221914519298
2018-10-03 22:19:16,685 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:19:16,736 [salt.state       :290 ][INFO    ][28833] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-10-03 22:19:16,755 [salt.state       :905 ][INFO    ][28833] Loading fresh modules for state activity
2018-10-03 22:19:16,800 [salt.state       :1941][INFO    ][28833] Completed state [libapache2-mod-wsgi] at time 22:19:16.800054 duration_in_ms=5220.939
2018-10-03 22:19:16,804 [salt.state       :1770][INFO    ][28833] Running state [a2enmod wsgi] at time 22:19:16.804831
2018-10-03 22:19:16,805 [salt.state       :1803][INFO    ][28833] Executing state cmd.run for [a2enmod wsgi]
2018-10-03 22:19:16,805 [salt.state       :290 ][INFO    ][28833] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-03 22:19:16,806 [salt.state       :1941][INFO    ][28833] Completed state [a2enmod wsgi] at time 22:19:16.806084 duration_in_ms=1.254
2018-10-03 22:19:16,810 [salt.state       :1770][INFO    ][28833] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:19:16.810594
2018-10-03 22:19:16,810 [salt.state       :1803][INFO    ][28833] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-03 22:19:16,850 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-10-03 22:19:16,912 [salt.state       :290 ][INFO    ][28833] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-10-03 22:19:16,913 [salt.state       :1941][INFO    ][28833] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:19:16.913184 duration_in_ms=102.59
2018-10-03 22:19:16,913 [salt.state       :1770][INFO    ][28833] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:19:16.913429
2018-10-03 22:19:16,914 [salt.state       :1803][INFO    ][28833] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-03 22:19:16,914 [salt.state       :290 ][INFO    ][28833] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-03 22:19:16,914 [salt.state       :1941][INFO    ][28833] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:19:16.914849 duration_in_ms=1.42
2018-10-03 22:19:16,915 [salt.state       :1770][INFO    ][28833] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:19:16.915049
2018-10-03 22:19:16,915 [salt.state       :1803][INFO    ][28833] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-03 22:19:16,915 [salt.state       :290 ][INFO    ][28833] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-10-03 22:19:16,915 [salt.state       :1941][INFO    ][28833] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:19:16.915682 duration_in_ms=0.633
2018-10-03 22:19:16,916 [salt.state       :1770][INFO    ][28833] Running state [a2enmod mpm_prefork] at time 22:19:16.916305
2018-10-03 22:19:16,916 [salt.state       :1803][INFO    ][28833] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-03 22:19:16,919 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-10-03 22:19:16,975 [salt.state       :290 ][INFO    ][28833] {'pid': 30692, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-03 22:19:16,976 [salt.state       :1941][INFO    ][28833] Completed state [a2enmod mpm_prefork] at time 22:19:16.976898 duration_in_ms=60.593
2018-10-03 22:19:16,977 [salt.state       :1770][INFO    ][28833] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:19:16.977406
2018-10-03 22:19:16,977 [salt.state       :1803][INFO    ][28833] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-03 22:19:16,978 [salt.state       :290 ][INFO    ][28833] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-03 22:19:16,978 [salt.state       :1941][INFO    ][28833] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:19:16.978489 duration_in_ms=1.084
2018-10-03 22:19:16,978 [salt.state       :1770][INFO    ][28833] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:19:16.978719
2018-10-03 22:19:16,978 [salt.state       :1803][INFO    ][28833] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-03 22:19:16,979 [salt.state       :290 ][INFO    ][28833] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-10-03 22:19:16,979 [salt.state       :1941][INFO    ][28833] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:19:16.979460 duration_in_ms=0.741
2018-10-03 22:19:16,982 [salt.state       :1770][INFO    ][28833] Running state [apache_server_service_task] at time 22:19:16.982250
2018-10-03 22:19:16,982 [salt.state       :1803][INFO    ][28833] Executing state test.show_notification for [apache_server_service_task]
2018-10-03 22:19:16,983 [salt.state       :290 ][INFO    ][28833] Running apache.server.service
2018-10-03 22:19:16,983 [salt.state       :1941][INFO    ][28833] Completed state [apache_server_service_task] at time 22:19:16.983300 duration_in_ms=1.05
2018-10-03 22:19:16,983 [salt.state       :1770][INFO    ][28833] Running state [/etc/apache2/ports.conf] at time 22:19:16.983814
2018-10-03 22:19:16,984 [salt.state       :1803][INFO    ][28833] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-03 22:19:17,008 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-10-03 22:19:17,069 [salt.state       :290 ][INFO    ][28833] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-10-03 22:19:17,069 [salt.state       :1941][INFO    ][28833] Completed state [/etc/apache2/ports.conf] at time 22:19:17.069579 duration_in_ms=85.764
2018-10-03 22:19:17,070 [salt.state       :1770][INFO    ][28833] Running state [/etc/apache2/conf-available/security.conf] at time 22:19:17.070701
2018-10-03 22:19:17,070 [salt.state       :1803][INFO    ][28833] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-03 22:19:17,090 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-10-03 22:19:17,149 [salt.state       :290 ][INFO    ][28833] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-10-03 22:19:17,150 [salt.state       :1941][INFO    ][28833] Completed state [/etc/apache2/conf-available/security.conf] at time 22:19:17.150088 duration_in_ms=79.386
2018-10-03 22:19:17,732 [salt.state       :1770][INFO    ][28833] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 22:19:17.732092
2018-10-03 22:19:17,733 [salt.state       :1803][INFO    ][28833] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-03 22:19:17,734 [salt.state       :290 ][INFO    ][28833] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-10-03 22:19:17,734 [salt.state       :1941][INFO    ][28833] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 22:19:17.734740 duration_in_ms=2.649
2018-10-03 22:19:17,737 [salt.state       :1770][INFO    ][28833] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:19:17.736342
2018-10-03 22:19:17,738 [salt.state       :1803][INFO    ][28833] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-03 22:19:17,768 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-10-03 22:19:17,806 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-10-03 22:19:17,882 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-10-03 22:19:17,913 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-10-03 22:19:18,009 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-10-03 22:19:18,035 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-10-03 22:19:18,070 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-10-03 22:19:18,089 [salt.state       :290 ][INFO    ][28833] File changed:
New file
2018-10-03 22:19:18,090 [salt.state       :1941][INFO    ][28833] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:19:18.090307 duration_in_ms=353.975
2018-10-03 22:19:18,090 [salt.state       :1770][INFO    ][28833] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:19:18.090805
2018-10-03 22:19:18,091 [salt.state       :1803][INFO    ][28833] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-03 22:19:18,362 [salt.state       :290 ][INFO    ][28833] File changed:
New file
2018-10-03 22:19:18,362 [salt.state       :1941][INFO    ][28833] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:19:18.362328 duration_in_ms=271.523
2018-10-03 22:19:18,364 [salt.state       :1770][INFO    ][28833] Running state [apache2] at time 22:19:18.364059
2018-10-03 22:19:18,364 [salt.state       :1803][INFO    ][28833] Executing state service.running for [apache2]
2018-10-03 22:19:18,365 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-03 22:19:18,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 22:19:18,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 22:19:18,446 [salt.state       :290 ][INFO    ][28833] The service apache2 is already running
2018-10-03 22:19:18,447 [salt.state       :1941][INFO    ][28833] Completed state [apache2] at time 22:19:18.447412 duration_in_ms=83.352
2018-10-03 22:19:18,447 [salt.state       :1770][INFO    ][28833] Running state [apache2] at time 22:19:18.447850
2018-10-03 22:19:18,448 [salt.state       :1803][INFO    ][28833] Executing state service.mod_watch for [apache2]
2018-10-03 22:19:18,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 22:19:18,472 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-10-03 22:19:18,673 [salt.state       :290 ][INFO    ][28833] {'apache2': True}
2018-10-03 22:19:18,674 [salt.state       :1941][INFO    ][28833] Completed state [apache2] at time 22:19:18.674354 duration_in_ms=226.504
2018-10-03 22:19:18,675 [salt.state       :1770][INFO    ][28833] Running state [/etc/apache2/conf-enabled/security.conf] at time 22:19:18.675348
2018-10-03 22:19:18,675 [salt.state       :1803][INFO    ][28833] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-03 22:19:18,685 [salt.state       :290 ][INFO    ][28833] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-10-03 22:19:18,686 [salt.state       :1941][INFO    ][28833] Completed state [/etc/apache2/conf-enabled/security.conf] at time 22:19:18.686273 duration_in_ms=10.925
2018-10-03 22:19:18,688 [salt.state       :1770][INFO    ][28833] Running state [gnocchi-common] at time 22:19:18.688232
2018-10-03 22:19:18,688 [salt.state       :1803][INFO    ][28833] Executing state pkg.installed for [gnocchi-common]
2018-10-03 22:19:18,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:19:19,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-10-03 22:19:24,695 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003221924681149
2018-10-03 22:19:24,716 [salt.minion      :1431][INFO    ][31032] Starting a new job with PID 31032
2018-10-03 22:19:24,741 [salt.minion      :1708][INFO    ][31032] Returning information for job: 20181003221924681149
2018-10-03 22:19:34,848 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003221934835721
2018-10-03 22:19:34,875 [salt.minion      :1431][INFO    ][31874] Starting a new job with PID 31874
2018-10-03 22:19:34,901 [salt.minion      :1708][INFO    ][31874] Returning information for job: 20181003221934835721
2018-10-03 22:19:45,022 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003221945005697
2018-10-03 22:19:45,034 [salt.minion      :1431][INFO    ][510] Starting a new job with PID 510
2018-10-03 22:19:45,055 [salt.minion      :1708][INFO    ][510] Returning information for job: 20181003221945005697
2018-10-03 22:19:55,208 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003221955191786
2018-10-03 22:19:55,227 [salt.minion      :1431][INFO    ][1031] Starting a new job with PID 1031
2018-10-03 22:19:55,246 [salt.minion      :1708][INFO    ][1031] Returning information for job: 20181003221955191786
2018-10-03 22:20:02,605 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:20:02,672 [salt.state       :290 ][INFO    ][28833] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp4'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.1-1.0~u16.04+mcp16'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp5'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp6'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-10-03 22:20:02,699 [salt.state       :905 ][INFO    ][28833] Loading fresh modules for state activity
2018-10-03 22:20:02,746 [salt.state       :1941][INFO    ][28833] Completed state [gnocchi-common] at time 22:20:02.746518 duration_in_ms=44058.286
2018-10-03 22:20:02,750 [salt.state       :1770][INFO    ][28833] Running state [gnocchi_ssl_mysql] at time 22:20:02.750476
2018-10-03 22:20:02,750 [salt.state       :1803][INFO    ][28833] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-10-03 22:20:02,751 [salt.state       :290 ][INFO    ][28833] Running gnocchi._ssl.mysql
2018-10-03 22:20:02,751 [salt.state       :1941][INFO    ][28833] Completed state [gnocchi_ssl_mysql] at time 22:20:02.751851 duration_in_ms=1.376
2018-10-03 22:20:02,753 [salt.state       :1770][INFO    ][28833] Running state [/etc/gnocchi/gnocchi.conf] at time 22:20:02.753866
2018-10-03 22:20:02,755 [salt.state       :1803][INFO    ][28833] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-10-03 22:20:02,791 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-10-03 22:20:02,897 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-10-03 22:20:02,916 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-10-03 22:20:02,954 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-10-03 22:20:02,995 [salt.fileclient  :1215][INFO    ][28833] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-10-03 22:20:03,003 [salt.state       :290 ][INFO    ][28833] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -515,153 +316,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +480,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.33:6379

2018-10-03 22:20:03,012 [salt.state       :1941][INFO    ][28833] Completed state [/etc/gnocchi/gnocchi.conf] at time 22:20:03.012078 duration_in_ms=258.212
2018-10-03 22:20:03,021 [salt.state       :1770][INFO    ][28833] Running state [gnocchi-api] at time 22:20:03.021064
2018-10-03 22:20:03,021 [salt.state       :1803][INFO    ][28833] Executing state pkg.installed for [gnocchi-api]
2018-10-03 22:20:04,492 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:20:04,532 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-10-03 22:20:05,366 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222005351021
2018-10-03 22:20:05,382 [salt.minion      :1431][INFO    ][1520] Starting a new job with PID 1520
2018-10-03 22:20:05,411 [salt.minion      :1708][INFO    ][1520] Returning information for job: 20181003222005351021
2018-10-03 22:20:13,783 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:20:13,855 [salt.state       :290 ][INFO    ][28833] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp10'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-10-03 22:20:13,893 [salt.state       :905 ][INFO    ][28833] Loading fresh modules for state activity
2018-10-03 22:20:13,931 [salt.state       :1941][INFO    ][28833] Completed state [gnocchi-api] at time 22:20:13.931914 duration_in_ms=10910.849
2018-10-03 22:20:13,939 [salt.state       :1770][INFO    ][28833] Running state [gnocchi-metricd] at time 22:20:13.939646
2018-10-03 22:20:13,939 [salt.state       :1803][INFO    ][28833] Executing state pkg.installed for [gnocchi-metricd]
2018-10-03 22:20:15,096 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:20:15,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-10-03 22:20:15,534 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222015518715
2018-10-03 22:20:15,552 [salt.minion      :1431][INFO    ][2405] Starting a new job with PID 2405
2018-10-03 22:20:15,574 [salt.minion      :1708][INFO    ][2405] Returning information for job: 20181003222015518715
2018-10-03 22:20:18,175 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:20:18,235 [salt.state       :290 ][INFO    ][28833] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-10-03 22:20:18,267 [salt.state       :905 ][INFO    ][28833] Loading fresh modules for state activity
2018-10-03 22:20:18,495 [salt.state       :1941][INFO    ][28833] Completed state [gnocchi-metricd] at time 22:20:18.495549 duration_in_ms=4555.898
2018-10-03 22:20:18,507 [salt.state       :1770][INFO    ][28833] Running state [python-memcache] at time 22:20:18.507195
2018-10-03 22:20:18,507 [salt.state       :1803][INFO    ][28833] Executing state pkg.installed for [python-memcache]
2018-10-03 22:20:19,269 [salt.state       :290 ][INFO    ][28833] All specified packages are already installed
2018-10-03 22:20:19,269 [salt.state       :1941][INFO    ][28833] Completed state [python-memcache] at time 22:20:19.269444 duration_in_ms=762.249
2018-10-03 22:20:19,271 [salt.state       :1770][INFO    ][28833] Running state [gnocchi-upgrade] at time 22:20:19.271415
2018-10-03 22:20:19,271 [salt.state       :1803][INFO    ][28833] Executing state cmd.run for [gnocchi-upgrade]
2018-10-03 22:20:19,273 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-10-03 22:20:21,568 [salt.state       :290 ][INFO    ][28833] {'pid': 2637, 'retcode': 0, 'stderr': '2018-10-03 22:20:20,683 [2645] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-10-03 22:20:21,007 [2645] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2018-10-03 22:20:21,421 [2645] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.33,port=6379,db=0>>>\n2018-10-03 22:20:21,423 [2645] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-10-03 22:20:21,569 [salt.state       :1941][INFO    ][28833] Completed state [gnocchi-upgrade] at time 22:20:21.569230 duration_in_ms=2297.813
2018-10-03 22:20:21,573 [salt.state       :1770][INFO    ][28833] Running state [wsgi_gnocchi] at time 22:20:21.573736
2018-10-03 22:20:21,574 [salt.state       :1803][INFO    ][28833] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-10-03 22:20:21,577 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-10-03 22:20:21,646 [salt.state       :290 ][INFO    ][28833] {'new': 'wsgi_gnocchi', 'old': None}
2018-10-03 22:20:21,647 [salt.state       :1941][INFO    ][28833] Completed state [wsgi_gnocchi] at time 22:20:21.647338 duration_in_ms=73.603
2018-10-03 22:20:21,650 [salt.state       :1770][INFO    ][28833] Running state [apache2] at time 22:20:21.650683
2018-10-03 22:20:21,651 [salt.state       :1803][INFO    ][28833] Executing state service.running for [apache2]
2018-10-03 22:20:21,654 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 22:20:21,678 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 22:20:21,703 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-10-03 22:20:22,934 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 22:20:22,958 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 22:20:23,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 22:20:23,037 [salt.state       :290 ][INFO    ][28833] {'apache2': True}
2018-10-03 22:20:23,038 [salt.state       :1941][INFO    ][28833] Completed state [apache2] at time 22:20:23.038709 duration_in_ms=1388.026
2018-10-03 22:20:23,040 [salt.state       :1770][INFO    ][28833] Running state [gnocchi-metricd] at time 22:20:23.040422
2018-10-03 22:20:23,046 [salt.state       :1803][INFO    ][28833] Executing state service.running for [gnocchi-metricd]
2018-10-03 22:20:23,047 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-10-03 22:20:23,082 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 22:20:23,107 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 22:20:23,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 22:20:23,183 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 22:20:23,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 22:20:23,269 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 22:20:23,319 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 22:20:24,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28833] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 22:20:24,138 [salt.state       :290 ][INFO    ][28833] {'gnocchi-metricd': True}
2018-10-03 22:20:24,138 [salt.state       :1941][INFO    ][28833] Completed state [gnocchi-metricd] at time 22:20:24.138854 duration_in_ms=1098.432
2018-10-03 22:20:24,142 [salt.minion      :1708][INFO    ][28833] Returning information for job: 20181003221849223811
2018-10-03 22:23:49,463 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command test.ping with jid 20181003222349451836
2018-10-03 22:23:49,487 [salt.minion      :1431][INFO    ][2948] Starting a new job with PID 2948
2018-10-03 22:23:49,514 [salt.minion      :1708][INFO    ][2948] Returning information for job: 20181003222349451836
2018-10-03 22:23:49,693 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.sls with jid 20181003222349674237
2018-10-03 22:23:49,711 [salt.minion      :1431][INFO    ][2953] Starting a new job with PID 2953
2018-10-03 22:23:54,709 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222354691626
2018-10-03 22:23:54,734 [salt.minion      :1431][INFO    ][2958] Starting a new job with PID 2958
2018-10-03 22:23:54,760 [salt.minion      :1708][INFO    ][2958] Returning information for job: 20181003222354691626
2018-10-03 22:23:57,844 [salt.state       :905 ][INFO    ][2953] Loading fresh modules for state activity
2018-10-03 22:23:57,917 [salt.fileclient  :1215][INFO    ][2953] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-10-03 22:23:57,952 [salt.fileclient  :1215][INFO    ][2953] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-10-03 22:23:58,647 [salt.fileclient  :1215][INFO    ][2953] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-10-03 22:24:00,467 [salt.state       :1770][INFO    ][2953] Running state [apache2] at time 22:24:00.467357
2018-10-03 22:24:00,468 [salt.state       :1803][INFO    ][2953] Executing state pkg.installed for [apache2]
2018-10-03 22:24:00,468 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:24:00,956 [salt.state       :290 ][INFO    ][2953] All specified packages are already installed
2018-10-03 22:24:00,957 [salt.state       :1941][INFO    ][2953] Completed state [apache2] at time 22:24:00.957044 duration_in_ms=489.688
2018-10-03 22:24:00,957 [salt.state       :1770][INFO    ][2953] Running state [openssl] at time 22:24:00.957364
2018-10-03 22:24:00,957 [salt.state       :1803][INFO    ][2953] Executing state pkg.installed for [openssl]
2018-10-03 22:24:00,967 [salt.state       :290 ][INFO    ][2953] All specified packages are already installed
2018-10-03 22:24:00,967 [salt.state       :1941][INFO    ][2953] Completed state [openssl] at time 22:24:00.967608 duration_in_ms=10.244
2018-10-03 22:24:00,968 [salt.state       :1770][INFO    ][2953] Running state [a2enmod rewrite] at time 22:24:00.968089
2018-10-03 22:24:00,968 [salt.state       :1803][INFO    ][2953] Executing state cmd.run for [a2enmod rewrite]
2018-10-03 22:24:00,968 [salt.state       :290 ][INFO    ][2953] /etc/apache2/mods-enabled/rewrite.load exists
2018-10-03 22:24:00,968 [salt.state       :1941][INFO    ][2953] Completed state [a2enmod rewrite] at time 22:24:00.968772 duration_in_ms=0.683
2018-10-03 22:24:00,969 [salt.state       :1770][INFO    ][2953] Running state [libapache2-mod-wsgi] at time 22:24:00.969512
2018-10-03 22:24:00,970 [salt.state       :1803][INFO    ][2953] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-03 22:24:00,978 [salt.state       :290 ][INFO    ][2953] All specified packages are already installed
2018-10-03 22:24:00,978 [salt.state       :1941][INFO    ][2953] Completed state [libapache2-mod-wsgi] at time 22:24:00.978880 duration_in_ms=9.367
2018-10-03 22:24:00,979 [salt.state       :1770][INFO    ][2953] Running state [a2enmod wsgi] at time 22:24:00.979223
2018-10-03 22:24:00,979 [salt.state       :1803][INFO    ][2953] Executing state cmd.run for [a2enmod wsgi]
2018-10-03 22:24:00,979 [salt.state       :290 ][INFO    ][2953] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-03 22:24:00,980 [salt.state       :1941][INFO    ][2953] Completed state [a2enmod wsgi] at time 22:24:00.979868 duration_in_ms=0.646
2018-10-03 22:24:00,986 [salt.state       :1770][INFO    ][2953] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:24:00.986503
2018-10-03 22:24:00,986 [salt.state       :1803][INFO    ][2953] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-03 22:24:01,257 [salt.state       :290 ][INFO    ][2953] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-10-03 22:24:01,258 [salt.state       :1941][INFO    ][2953] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 22:24:01.258298 duration_in_ms=271.795
2018-10-03 22:24:01,258 [salt.state       :1770][INFO    ][2953] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:24:01.258827
2018-10-03 22:24:01,259 [salt.state       :1803][INFO    ][2953] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-03 22:24:01,261 [salt.state       :290 ][INFO    ][2953] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-03 22:24:01,262 [salt.state       :1941][INFO    ][2953] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 22:24:01.262581 duration_in_ms=3.754
2018-10-03 22:24:01,263 [salt.state       :1770][INFO    ][2953] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:24:01.263446
2018-10-03 22:24:01,264 [salt.state       :1803][INFO    ][2953] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-03 22:24:01,265 [salt.state       :290 ][INFO    ][2953] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-10-03 22:24:01,266 [salt.state       :1941][INFO    ][2953] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 22:24:01.266358 duration_in_ms=2.912
2018-10-03 22:24:01,267 [salt.state       :1770][INFO    ][2953] Running state [a2enmod mpm_prefork] at time 22:24:01.267524
2018-10-03 22:24:01,268 [salt.state       :1803][INFO    ][2953] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-03 22:24:01,268 [salt.state       :290 ][INFO    ][2953] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-10-03 22:24:01,269 [salt.state       :1941][INFO    ][2953] Completed state [a2enmod mpm_prefork] at time 22:24:01.269359 duration_in_ms=1.835
2018-10-03 22:24:01,270 [salt.state       :1770][INFO    ][2953] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:24:01.270236
2018-10-03 22:24:01,270 [salt.state       :1803][INFO    ][2953] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-03 22:24:01,271 [salt.state       :290 ][INFO    ][2953] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-03 22:24:01,271 [salt.state       :1941][INFO    ][2953] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 22:24:01.271219 duration_in_ms=0.983
2018-10-03 22:24:01,272 [salt.state       :1770][INFO    ][2953] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:24:01.271873
2018-10-03 22:24:01,272 [salt.state       :1803][INFO    ][2953] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-03 22:24:01,273 [salt.state       :290 ][INFO    ][2953] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-10-03 22:24:01,273 [salt.state       :1941][INFO    ][2953] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 22:24:01.273275 duration_in_ms=1.403
2018-10-03 22:24:01,275 [salt.state       :1770][INFO    ][2953] Running state [apache_server_service_task] at time 22:24:01.275383
2018-10-03 22:24:01,275 [salt.state       :1803][INFO    ][2953] Executing state test.show_notification for [apache_server_service_task]
2018-10-03 22:24:01,275 [salt.state       :290 ][INFO    ][2953] Running apache.server.service
2018-10-03 22:24:01,276 [salt.state       :1941][INFO    ][2953] Completed state [apache_server_service_task] at time 22:24:01.276178 duration_in_ms=0.795
2018-10-03 22:24:01,276 [salt.state       :1770][INFO    ][2953] Running state [/etc/apache2/ports.conf] at time 22:24:01.276927
2018-10-03 22:24:01,277 [salt.state       :1803][INFO    ][2953] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-03 22:24:01,354 [salt.state       :290 ][INFO    ][2953] File /etc/apache2/ports.conf is in the correct state
2018-10-03 22:24:01,355 [salt.state       :1941][INFO    ][2953] Completed state [/etc/apache2/ports.conf] at time 22:24:01.355110 duration_in_ms=78.183
2018-10-03 22:24:01,355 [salt.state       :1770][INFO    ][2953] Running state [/etc/apache2/conf-available/security.conf] at time 22:24:01.355791
2018-10-03 22:24:01,356 [salt.state       :1803][INFO    ][2953] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-03 22:24:01,432 [salt.state       :290 ][INFO    ][2953] File /etc/apache2/conf-available/security.conf is in the correct state
2018-10-03 22:24:01,433 [salt.state       :1941][INFO    ][2953] Completed state [/etc/apache2/conf-available/security.conf] at time 22:24:01.433091 duration_in_ms=77.3
2018-10-03 22:24:01,438 [salt.state       :1770][INFO    ][2953] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 22:24:01.438820
2018-10-03 22:24:01,439 [salt.state       :1803][INFO    ][2953] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-03 22:24:01,439 [salt.state       :290 ][INFO    ][2953] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-10-03 22:24:01,439 [salt.state       :1941][INFO    ][2953] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 22:24:01.439515 duration_in_ms=0.694
2018-10-03 22:24:01,439 [salt.state       :1770][INFO    ][2953] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:24:01.439872
2018-10-03 22:24:01,440 [salt.state       :1803][INFO    ][2953] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-03 22:24:01,706 [salt.state       :290 ][INFO    ][2953] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-10-03 22:24:01,707 [salt.state       :1941][INFO    ][2953] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 22:24:01.706973 duration_in_ms=267.1
2018-10-03 22:24:01,707 [salt.state       :1770][INFO    ][2953] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:24:01.707357
2018-10-03 22:24:01,707 [salt.state       :1803][INFO    ][2953] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-03 22:24:01,974 [salt.state       :290 ][INFO    ][2953] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-10-03 22:24:01,974 [salt.state       :1941][INFO    ][2953] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 22:24:01.974618 duration_in_ms=267.26
2018-10-03 22:24:01,976 [salt.state       :1770][INFO    ][2953] Running state [apache2] at time 22:24:01.976515
2018-10-03 22:24:01,977 [salt.state       :1803][INFO    ][2953] Executing state service.running for [apache2]
2018-10-03 22:24:01,977 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-03 22:24:02,031 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 22:24:02,060 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 22:24:02,091 [salt.state       :290 ][INFO    ][2953] The service apache2 is already running
2018-10-03 22:24:02,092 [salt.state       :1941][INFO    ][2953] Completed state [apache2] at time 22:24:02.091942 duration_in_ms=115.426
2018-10-03 22:24:02,093 [salt.state       :1770][INFO    ][2953] Running state [/etc/apache2/conf-enabled/security.conf] at time 22:24:02.093143
2018-10-03 22:24:02,093 [salt.state       :1803][INFO    ][2953] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-03 22:24:02,097 [salt.state       :290 ][INFO    ][2953] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-10-03 22:24:02,098 [salt.state       :1941][INFO    ][2953] Completed state [/etc/apache2/conf-enabled/security.conf] at time 22:24:02.098780 duration_in_ms=5.637
2018-10-03 22:24:02,099 [salt.state       :1770][INFO    ][2953] Running state [panko-api] at time 22:24:02.099788
2018-10-03 22:24:02,100 [salt.state       :1803][INFO    ][2953] Executing state pkg.installed for [panko-api]
2018-10-03 22:24:02,128 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-10-03 22:24:02,276 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 22:24:04,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:24:04,602 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-10-03 22:24:04,847 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222404828808
2018-10-03 22:24:04,871 [salt.minion      :1431][INFO    ][3364] Starting a new job with PID 3364
2018-10-03 22:24:04,889 [salt.minion      :1708][INFO    ][3364] Returning information for job: 20181003222404828808
2018-10-03 22:24:08,275 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:24:08,336 [salt.state       :290 ][INFO    ][2953] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-10-03 22:24:08,379 [salt.state       :905 ][INFO    ][2953] Loading fresh modules for state activity
2018-10-03 22:24:08,423 [salt.state       :1941][INFO    ][2953] Completed state [panko-api] at time 22:24:08.423499 duration_in_ms=6323.709
2018-10-03 22:24:08,430 [salt.state       :1770][INFO    ][2953] Running state [panko_ssl_mysql] at time 22:24:08.430386
2018-10-03 22:24:08,431 [salt.state       :1803][INFO    ][2953] Executing state test.show_notification for [panko_ssl_mysql]
2018-10-03 22:24:08,432 [salt.state       :290 ][INFO    ][2953] Running panko._ssl.mysql
2018-10-03 22:24:08,433 [salt.state       :1941][INFO    ][2953] Completed state [panko_ssl_mysql] at time 22:24:08.433098 duration_in_ms=2.712
2018-10-03 22:24:08,437 [salt.state       :1770][INFO    ][2953] Running state [/etc/panko/panko.conf] at time 22:24:08.437180
2018-10-03 22:24:08,438 [salt.state       :1803][INFO    ][2953] Executing state file.managed for [/etc/panko/panko.conf]
2018-10-03 22:24:08,470 [salt.fileclient  :1215][INFO    ][2953] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-10-03 22:24:08,531 [salt.fileclient  :1215][INFO    ][2953] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-10-03 22:24:08,560 [salt.fileclient  :1215][INFO    ][2953] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-10-03 22:24:08,660 [salt.state       :290 ][INFO    ][2953] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -466,110 +481,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-10-03 22:24:08,669 [salt.state       :1941][INFO    ][2953] Completed state [/etc/panko/panko.conf] at time 22:24:08.669065 duration_in_ms=231.885
2018-10-03 22:24:08,674 [salt.state       :1770][INFO    ][2953] Running state [panko-dbsync] at time 22:24:08.674944
2018-10-03 22:24:08,675 [salt.state       :1803][INFO    ][2953] Executing state cmd.run for [panko-dbsync]
2018-10-03 22:24:08,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command 'panko-dbsync' in directory '/root'
2018-10-03 22:24:10,746 [salt.state       :290 ][INFO    ][2953] {'pid': 3581, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-03 22:24:10,748 [salt.state       :1941][INFO    ][2953] Completed state [panko-dbsync] at time 22:24:10.747902 duration_in_ms=2072.956
2018-10-03 22:24:10,762 [salt.state       :1770][INFO    ][2953] Running state [wsgi_panko] at time 22:24:10.762220
2018-10-03 22:24:10,762 [salt.state       :1803][INFO    ][2953] Executing state apache_site.enabled for [wsgi_panko]
2018-10-03 22:24:10,763 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-10-03 22:24:10,840 [salt.state       :290 ][INFO    ][2953] {'new': 'wsgi_panko', 'old': None}
2018-10-03 22:24:10,841 [salt.state       :1941][INFO    ][2953] Completed state [wsgi_panko] at time 22:24:10.841229 duration_in_ms=79.008
2018-10-03 22:24:11,424 [salt.state       :1770][INFO    ][2953] Running state [apache2] at time 22:24:11.424749
2018-10-03 22:24:11,425 [salt.state       :1803][INFO    ][2953] Executing state service.running for [apache2]
2018-10-03 22:24:11,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 22:24:11,454 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 22:24:11,489 [salt.state       :290 ][INFO    ][2953] The service apache2 is already running
2018-10-03 22:24:11,491 [salt.state       :1941][INFO    ][2953] Completed state [apache2] at time 22:24:11.491059 duration_in_ms=66.31
2018-10-03 22:24:11,491 [salt.state       :1770][INFO    ][2953] Running state [apache2] at time 22:24:11.491673
2018-10-03 22:24:11,492 [salt.state       :1803][INFO    ][2953] Executing state service.mod_watch for [apache2]
2018-10-03 22:24:11,494 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 22:24:11,524 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-03 22:24:13,909 [salt.state       :290 ][INFO    ][2953] {'apache2': True}
2018-10-03 22:24:13,909 [salt.state       :1941][INFO    ][2953] Completed state [apache2] at time 22:24:13.909531 duration_in_ms=2417.857
2018-10-03 22:24:13,918 [salt.minion      :1708][INFO    ][2953] Returning information for job: 20181003222349674237
2018-10-03 22:25:06,339 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command test.ping with jid 20181003222506324418
2018-10-03 22:25:06,367 [salt.minion      :1431][INFO    ][3734] Starting a new job with PID 3734
2018-10-03 22:25:06,389 [salt.minion      :1708][INFO    ][3734] Returning information for job: 20181003222506324418
2018-10-03 22:25:06,533 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.sls with jid 20181003222506518804
2018-10-03 22:25:06,561 [salt.minion      :1431][INFO    ][3739] Starting a new job with PID 3739
2018-10-03 22:25:11,552 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222511535758
2018-10-03 22:25:11,573 [salt.minion      :1431][INFO    ][3744] Starting a new job with PID 3744
2018-10-03 22:25:11,596 [salt.minion      :1708][INFO    ][3744] Returning information for job: 20181003222511535758
2018-10-03 22:25:14,682 [salt.state       :905 ][INFO    ][3739] Loading fresh modules for state activity
2018-10-03 22:25:14,748 [salt.fileclient  :1215][INFO    ][3739] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-10-03 22:25:14,792 [salt.fileclient  :1215][INFO    ][3739] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-10-03 22:25:14,964 [salt.fileclient  :1215][INFO    ][3739] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-10-03 22:25:15,033 [salt.fileclient  :1215][INFO    ][3739] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-10-03 22:25:16,892 [salt.state       :1770][INFO    ][3739] Running state [aodh-api] at time 22:25:16.892610
2018-10-03 22:25:16,893 [salt.state       :1803][INFO    ][3739] Executing state pkg.installed for [aodh-api]
2018-10-03 22:25:16,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:25:17,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-10-03 22:25:17,590 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 22:25:20,034 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:25:20,080 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-10-03 22:25:21,676 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222521658140
2018-10-03 22:25:21,696 [salt.minion      :1431][INFO    ][4139] Starting a new job with PID 4139
2018-10-03 22:25:21,719 [salt.minion      :1708][INFO    ][4139] Returning information for job: 20181003222521658140
2018-10-03 22:25:31,845 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222531828203
2018-10-03 22:25:31,865 [salt.minion      :1431][INFO    ][5732] Starting a new job with PID 5732
2018-10-03 22:25:31,891 [salt.minion      :1708][INFO    ][5732] Returning information for job: 20181003222531828203
2018-10-03 22:25:37,871 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:25:37,933 [salt.state       :290 ][INFO    ][3739] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'c++-compiler' changed from 'absent' to '1'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-137.163'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev' changed from 'absent' to '1'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-10-03 22:25:37,971 [salt.state       :905 ][INFO    ][3739] Loading fresh modules for state activity
2018-10-03 22:25:38,186 [salt.state       :1941][INFO    ][3739] Completed state [aodh-api] at time 22:25:38.185785 duration_in_ms=21293.174
2018-10-03 22:25:38,197 [salt.state       :1770][INFO    ][3739] Running state [aodh-evaluator] at time 22:25:38.197687
2018-10-03 22:25:38,198 [salt.state       :1803][INFO    ][3739] Executing state pkg.installed for [aodh-evaluator]
2018-10-03 22:25:39,045 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:25:39,086 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-10-03 22:25:42,016 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222541994321
2018-10-03 22:25:42,067 [salt.minion      :1431][INFO    ][9607] Starting a new job with PID 9607
2018-10-03 22:25:42,134 [salt.minion      :1708][INFO    ][9607] Returning information for job: 20181003222541994321
2018-10-03 22:25:42,982 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:25:43,053 [salt.state       :290 ][INFO    ][3739] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-03 22:25:43,091 [salt.state       :905 ][INFO    ][3739] Loading fresh modules for state activity
2018-10-03 22:25:43,147 [salt.state       :1941][INFO    ][3739] Completed state [aodh-evaluator] at time 22:25:43.147271 duration_in_ms=4949.583
2018-10-03 22:25:43,163 [salt.state       :1770][INFO    ][3739] Running state [aodh-notifier] at time 22:25:43.163541
2018-10-03 22:25:43,163 [salt.state       :1803][INFO    ][3739] Executing state pkg.installed for [aodh-notifier]
2018-10-03 22:25:44,208 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:25:44,250 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-10-03 22:25:48,109 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:25:48,161 [salt.state       :290 ][INFO    ][3739] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-03 22:25:48,197 [salt.state       :905 ][INFO    ][3739] Loading fresh modules for state activity
2018-10-03 22:25:48,254 [salt.state       :1941][INFO    ][3739] Completed state [aodh-notifier] at time 22:25:48.254348 duration_in_ms=5090.807
2018-10-03 22:25:48,261 [salt.state       :1770][INFO    ][3739] Running state [aodh-listener] at time 22:25:48.261681
2018-10-03 22:25:48,262 [salt.state       :1803][INFO    ][3739] Executing state pkg.installed for [aodh-listener]
2018-10-03 22:25:49,322 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:25:49,361 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-10-03 22:25:52,037 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222552026141
2018-10-03 22:25:52,055 [salt.minion      :1431][INFO    ][10182] Starting a new job with PID 10182
2018-10-03 22:25:52,111 [salt.minion      :1708][INFO    ][10182] Returning information for job: 20181003222552026141
2018-10-03 22:25:52,943 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:25:52,993 [salt.state       :290 ][INFO    ][3739] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-03 22:25:53,026 [salt.state       :905 ][INFO    ][3739] Loading fresh modules for state activity
2018-10-03 22:25:53,070 [salt.state       :1941][INFO    ][3739] Completed state [aodh-listener] at time 22:25:53.070785 duration_in_ms=4809.104
2018-10-03 22:25:53,076 [salt.state       :1770][INFO    ][3739] Running state [python-aodhclient] at time 22:25:53.076648
2018-10-03 22:25:53,077 [salt.state       :1803][INFO    ][3739] Executing state pkg.installed for [python-aodhclient]
2018-10-03 22:25:54,110 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:25:54,147 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-10-03 22:25:56,436 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:25:56,504 [salt.state       :290 ][INFO    ][3739] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-10-03 22:25:56,536 [salt.state       :905 ][INFO    ][3739] Loading fresh modules for state activity
2018-10-03 22:25:56,584 [salt.state       :1941][INFO    ][3739] Completed state [python-aodhclient] at time 22:25:56.583927 duration_in_ms=3507.277
2018-10-03 22:25:56,591 [salt.state       :1770][INFO    ][3739] Running state [aodh_ssl_mysql] at time 22:25:56.591359
2018-10-03 22:25:56,591 [salt.state       :1803][INFO    ][3739] Executing state test.show_notification for [aodh_ssl_mysql]
2018-10-03 22:25:56,592 [salt.state       :290 ][INFO    ][3739] Running aodh._ssl.mysql
2018-10-03 22:25:56,593 [salt.state       :1941][INFO    ][3739] Completed state [aodh_ssl_mysql] at time 22:25:56.592956 duration_in_ms=1.597
2018-10-03 22:25:56,593 [salt.state       :1770][INFO    ][3739] Running state [aodh_ssl_rabbitmq] at time 22:25:56.593645
2018-10-03 22:25:56,596 [salt.state       :1803][INFO    ][3739] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-10-03 22:25:56,596 [salt.state       :290 ][INFO    ][3739] Running aodh._ssl.rabbitmq
2018-10-03 22:25:56,596 [salt.state       :1941][INFO    ][3739] Completed state [aodh_ssl_rabbitmq] at time 22:25:56.596522 duration_in_ms=2.878
2018-10-03 22:25:56,599 [salt.state       :1770][INFO    ][3739] Running state [/etc/aodh/aodh.conf] at time 22:25:56.599738
2018-10-03 22:25:56,600 [salt.state       :1803][INFO    ][3739] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-10-03 22:25:56,644 [salt.fileclient  :1215][INFO    ][3739] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-10-03 22:25:56,722 [salt.fileclient  :1215][INFO    ][3739] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-10-03 22:25:56,870 [salt.fileclient  :1215][INFO    ][3739] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-10-03 22:25:56,888 [salt.fileclient  :1215][INFO    ][3739] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-10-03 22:25:56,924 [salt.state       :290 ][INFO    ][3739] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.33
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,291 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +862,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +878,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +916,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -775,995 +1034,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-10-03 22:25:56,936 [salt.state       :1941][INFO    ][3739] Completed state [/etc/aodh/aodh.conf] at time 22:25:56.936857 duration_in_ms=337.119
2018-10-03 22:25:56,937 [salt.state       :1770][INFO    ][3739] Running state [/etc/default/aodh-evaluator] at time 22:25:56.937260
2018-10-03 22:25:56,937 [salt.state       :1803][INFO    ][3739] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-10-03 22:25:56,967 [salt.fileclient  :1215][INFO    ][3739] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-10-03 22:25:56,979 [salt.state       :290 ][INFO    ][3739] File changed:
New file
2018-10-03 22:25:56,980 [salt.state       :1941][INFO    ][3739] Completed state [/etc/default/aodh-evaluator] at time 22:25:56.980106 duration_in_ms=42.846
2018-10-03 22:25:56,980 [salt.state       :1770][INFO    ][3739] Running state [/etc/default/aodh-notifier] at time 22:25:56.980427
2018-10-03 22:25:56,980 [salt.state       :1803][INFO    ][3739] Executing state file.managed for [/etc/default/aodh-notifier]
2018-10-03 22:25:57,064 [salt.state       :290 ][INFO    ][3739] File changed:
New file
2018-10-03 22:25:57,065 [salt.state       :1941][INFO    ][3739] Completed state [/etc/default/aodh-notifier] at time 22:25:57.065674 duration_in_ms=85.247
2018-10-03 22:25:57,077 [salt.state       :1770][INFO    ][3739] Running state [/etc/default/aodh-listener] at time 22:25:57.077484
2018-10-03 22:25:57,078 [salt.state       :1803][INFO    ][3739] Executing state file.managed for [/etc/default/aodh-listener]
2018-10-03 22:25:57,125 [salt.state       :290 ][INFO    ][3739] File changed:
New file
2018-10-03 22:25:57,125 [salt.state       :1941][INFO    ][3739] Completed state [/etc/default/aodh-listener] at time 22:25:57.125929 duration_in_ms=48.444
2018-10-03 22:25:57,131 [salt.state       :1770][INFO    ][3739] Running state [aodh-dbsync] at time 22:25:57.131699
2018-10-03 22:25:57,131 [salt.state       :1803][INFO    ][3739] Executing state cmd.run for [aodh-dbsync]
2018-10-03 22:25:57,139 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command 'aodh-dbsync' in directory '/root'
2018-10-03 22:25:59,626 [salt.state       :290 ][INFO    ][3739] {'pid': 10381, 'retcode': 0, 'stderr': '', 'stdout': '2018-10-03 22:25:59.224 10382 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-10-03 22:25:59.225 10382 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-10-03 22:25:59,626 [salt.state       :1941][INFO    ][3739] Completed state [aodh-dbsync] at time 22:25:59.626774 duration_in_ms=2495.075
2018-10-03 22:25:59,627 [salt.state       :1770][INFO    ][3739] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 22:25:59.627611
2018-10-03 22:25:59,628 [salt.state       :1803][INFO    ][3739] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-10-03 22:25:59,662 [salt.fileclient  :1215][INFO    ][3739] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-10-03 22:25:59,709 [salt.state       :290 ][INFO    ][3739] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.33:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-10-03 22:25:59,709 [salt.state       :1941][INFO    ][3739] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 22:25:59.709287 duration_in_ms=81.676
2018-10-03 22:25:59,709 [salt.state       :1770][INFO    ][3739] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 22:25:59.709499
2018-10-03 22:25:59,710 [salt.state       :1803][INFO    ][3739] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-10-03 22:25:59,723 [salt.state       :290 ][INFO    ][3739] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-10-03 22:25:59,723 [salt.state       :1941][INFO    ][3739] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 22:25:59.723342 duration_in_ms=13.844
2018-10-03 22:26:00,334 [salt.state       :1770][INFO    ][3739] Running state [apache2] at time 22:26:00.334078
2018-10-03 22:26:00,337 [salt.state       :1803][INFO    ][3739] Executing state service.running for [apache2]
2018-10-03 22:26:00,340 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-03 22:26:00,382 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 22:26:00,413 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 22:26:00,449 [salt.state       :290 ][INFO    ][3739] The service apache2 is already running
2018-10-03 22:26:00,450 [salt.state       :1941][INFO    ][3739] Completed state [apache2] at time 22:26:00.450192 duration_in_ms=116.113
2018-10-03 22:26:00,451 [salt.state       :1770][INFO    ][3739] Running state [apache2] at time 22:26:00.450925
2018-10-03 22:26:00,452 [salt.state       :1803][INFO    ][3739] Executing state service.mod_watch for [apache2]
2018-10-03 22:26:00,455 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 22:26:00,481 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-03 22:26:02,231 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222602218474
2018-10-03 22:26:02,253 [salt.minion      :1431][INFO    ][10530] Starting a new job with PID 10530
2018-10-03 22:26:02,272 [salt.minion      :1708][INFO    ][10530] Returning information for job: 20181003222602218474
2018-10-03 22:26:02,885 [salt.state       :290 ][INFO    ][3739] {'apache2': True}
2018-10-03 22:26:02,886 [salt.state       :1941][INFO    ][3739] Completed state [apache2] at time 22:26:02.886539 duration_in_ms=2435.613
2018-10-03 22:26:02,891 [salt.state       :1770][INFO    ][3739] Running state [aodh-evaluator] at time 22:26:02.891397
2018-10-03 22:26:02,892 [salt.state       :1803][INFO    ][3739] Executing state service.running for [aodh-evaluator]
2018-10-03 22:26:02,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-10-03 22:26:02,928 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-03 22:26:02,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-10-03 22:26:02,982 [salt.state       :290 ][INFO    ][3739] The service aodh-evaluator is already running
2018-10-03 22:26:02,983 [salt.state       :1941][INFO    ][3739] Completed state [aodh-evaluator] at time 22:26:02.983639 duration_in_ms=92.242
2018-10-03 22:26:02,984 [salt.state       :1770][INFO    ][3739] Running state [aodh-evaluator] at time 22:26:02.984326
2018-10-03 22:26:02,985 [salt.state       :1803][INFO    ][3739] Executing state service.mod_watch for [aodh-evaluator]
2018-10-03 22:26:02,986 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-03 22:26:03,003 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-10-03 22:26:03,192 [salt.state       :290 ][INFO    ][3739] {'aodh-evaluator': True}
2018-10-03 22:26:03,192 [salt.state       :1941][INFO    ][3739] Completed state [aodh-evaluator] at time 22:26:03.192421 duration_in_ms=208.095
2018-10-03 22:26:03,193 [salt.state       :1770][INFO    ][3739] Running state [aodh-notifier] at time 22:26:03.193311
2018-10-03 22:26:03,195 [salt.state       :1803][INFO    ][3739] Executing state service.running for [aodh-notifier]
2018-10-03 22:26:03,202 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-10-03 22:26:03,233 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-03 22:26:03,263 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-10-03 22:26:03,303 [salt.state       :290 ][INFO    ][3739] The service aodh-notifier is already running
2018-10-03 22:26:03,304 [salt.state       :1941][INFO    ][3739] Completed state [aodh-notifier] at time 22:26:03.304237 duration_in_ms=110.926
2018-10-03 22:26:03,304 [salt.state       :1770][INFO    ][3739] Running state [aodh-notifier] at time 22:26:03.304664
2018-10-03 22:26:03,305 [salt.state       :1803][INFO    ][3739] Executing state service.mod_watch for [aodh-notifier]
2018-10-03 22:26:03,306 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-03 22:26:03,334 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-10-03 22:26:12,412 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222612393875
2018-10-03 22:26:12,437 [salt.minion      :1431][INFO    ][10662] Starting a new job with PID 10662
2018-10-03 22:26:12,459 [salt.minion      :1708][INFO    ][10662] Returning information for job: 20181003222612393875
2018-10-03 22:26:18,639 [salt.state       :290 ][INFO    ][3739] {'aodh-notifier': True}
2018-10-03 22:26:18,640 [salt.state       :1941][INFO    ][3739] Completed state [aodh-notifier] at time 22:26:18.640252 duration_in_ms=15335.587
2018-10-03 22:26:18,641 [salt.state       :1770][INFO    ][3739] Running state [aodh-listener] at time 22:26:18.641160
2018-10-03 22:26:18,641 [salt.state       :1803][INFO    ][3739] Executing state service.running for [aodh-listener]
2018-10-03 22:26:18,646 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-10-03 22:26:18,664 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-03 22:26:18,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-10-03 22:26:18,701 [salt.state       :290 ][INFO    ][3739] The service aodh-listener is already running
2018-10-03 22:26:18,701 [salt.state       :1941][INFO    ][3739] Completed state [aodh-listener] at time 22:26:18.701349 duration_in_ms=60.188
2018-10-03 22:26:18,701 [salt.state       :1770][INFO    ][3739] Running state [aodh-listener] at time 22:26:18.701632
2018-10-03 22:26:18,702 [salt.state       :1803][INFO    ][3739] Executing state service.mod_watch for [aodh-listener]
2018-10-03 22:26:18,703 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-03 22:26:18,720 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3739] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-10-03 22:26:22,592 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222622568006
2018-10-03 22:26:22,617 [salt.minion      :1431][INFO    ][10729] Starting a new job with PID 10729
2018-10-03 22:26:22,639 [salt.minion      :1708][INFO    ][10729] Returning information for job: 20181003222622568006
2018-10-03 22:26:32,765 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222632747373
2018-10-03 22:26:32,797 [salt.minion      :1431][INFO    ][10734] Starting a new job with PID 10734
2018-10-03 22:26:32,830 [salt.minion      :1708][INFO    ][10734] Returning information for job: 20181003222632747373
2018-10-03 22:26:33,891 [salt.state       :290 ][INFO    ][3739] {'aodh-listener': True}
2018-10-03 22:26:33,894 [salt.state       :1941][INFO    ][3739] Completed state [aodh-listener] at time 22:26:33.891722 duration_in_ms=15190.087
2018-10-03 22:26:33,897 [salt.minion      :1708][INFO    ][3739] Returning information for job: 20181003222506518804
2018-10-03 22:29:37,616 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command state.sls with jid 20181003222937605067
2018-10-03 22:29:37,640 [salt.minion      :1431][INFO    ][10804] Starting a new job with PID 10804
2018-10-03 22:29:42,730 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222942714707
2018-10-03 22:29:42,755 [salt.minion      :1431][INFO    ][10809] Starting a new job with PID 10809
2018-10-03 22:29:42,780 [salt.minion      :1708][INFO    ][10809] Returning information for job: 20181003222942714707
2018-10-03 22:29:45,421 [salt.state       :905 ][INFO    ][10804] Loading fresh modules for state activity
2018-10-03 22:29:45,799 [salt.fileclient  :1215][INFO    ][10804] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-10-03 22:29:45,848 [salt.fileclient  :1215][INFO    ][10804] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-10-03 22:29:47,935 [salt.state       :1770][INFO    ][10804] Running state [ceilometer-agent-central] at time 22:29:47.935008
2018-10-03 22:29:47,935 [salt.state       :1803][INFO    ][10804] Executing state pkg.installed for [ceilometer-agent-central]
2018-10-03 22:29:47,936 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:29:48,512 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-10-03 22:29:48,679 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 22:29:51,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:29:51,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-10-03 22:29:52,775 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003222952761737
2018-10-03 22:29:52,795 [salt.minion      :1431][INFO    ][11188] Starting a new job with PID 11188
2018-10-03 22:29:52,818 [salt.minion      :1708][INFO    ][11188] Returning information for job: 20181003222952761737
2018-10-03 22:30:03,001 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003223002984185
2018-10-03 22:30:03,030 [salt.minion      :1431][INFO    ][11875] Starting a new job with PID 11875
2018-10-03 22:30:03,062 [salt.minion      :1708][INFO    ][11875] Returning information for job: 20181003223002984185
2018-10-03 22:30:13,032 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003223013010105
2018-10-03 22:30:13,054 [salt.minion      :1431][INFO    ][13124] Starting a new job with PID 13124
2018-10-03 22:30:13,076 [salt.minion      :1708][INFO    ][13124] Returning information for job: 20181003223013010105
2018-10-03 22:30:15,951 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:30:16,021 [salt.state       :290 ][INFO    ][10804] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'ibverbs-providers' changed from 'absent' to '17.1-1~cloud0'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmthca1' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0ubuntu2.1~cloud0'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libipathverbs1' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libmlx4-1' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libmlx5-1' changed from 'absent' to '1'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '17.1-1~cloud0'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libnes1' changed from 'absent' to '1'
'librados2' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'libcxgb3-1' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'librdmacm1' changed from 'absent' to '17.1-1~cloud0'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-10-03 22:30:16,073 [salt.state       :905 ][INFO    ][10804] Loading fresh modules for state activity
2018-10-03 22:30:16,290 [salt.state       :1941][INFO    ][10804] Completed state [ceilometer-agent-central] at time 22:30:16.289769 duration_in_ms=28354.761
2018-10-03 22:30:16,299 [salt.state       :1770][INFO    ][10804] Running state [python-ceilometerclient] at time 22:30:16.299664
2018-10-03 22:30:16,300 [salt.state       :1803][INFO    ][10804] Executing state pkg.installed for [python-ceilometerclient]
2018-10-03 22:30:17,127 [salt.state       :290 ][INFO    ][10804] All specified packages are already installed
2018-10-03 22:30:17,129 [salt.state       :1941][INFO    ][10804] Completed state [python-ceilometerclient] at time 22:30:17.129422 duration_in_ms=829.757
2018-10-03 22:30:17,130 [salt.state       :1770][INFO    ][10804] Running state [ceilometer-agent-notification] at time 22:30:17.130030
2018-10-03 22:30:17,130 [salt.state       :1803][INFO    ][10804] Executing state pkg.installed for [ceilometer-agent-notification]
2018-10-03 22:30:17,161 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 22:30:17,226 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-10-03 22:30:21,114 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 22:30:21,170 [salt.state       :290 ][INFO    ][10804] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-10-03 22:30:21,206 [salt.state       :905 ][INFO    ][10804] Loading fresh modules for state activity
2018-10-03 22:30:21,261 [salt.state       :1941][INFO    ][10804] Completed state [ceilometer-agent-notification] at time 22:30:21.260874 duration_in_ms=4130.843
2018-10-03 22:30:21,270 [salt.state       :1770][INFO    ][10804] Running state [/etc/ceilometer/ceilometer.conf] at time 22:30:21.270709
2018-10-03 22:30:21,271 [salt.state       :1803][INFO    ][10804] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-10-03 22:30:21,334 [salt.fileclient  :1215][INFO    ][10804] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-10-03 22:30:21,627 [salt.fileclient  :1215][INFO    ][10804] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-10-03 22:30:21,651 [salt.fileclient  :1215][INFO    ][10804] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-10-03 22:30:21,692 [salt.state       :290 ][INFO    ][10804] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-10-03 22:30:21,701 [salt.state       :1941][INFO    ][10804] Completed state [/etc/ceilometer/ceilometer.conf] at time 22:30:21.701527 duration_in_ms=430.818
2018-10-03 22:30:21,702 [salt.state       :1770][INFO    ][10804] Running state [/etc/default/ceilometer-agent-central] at time 22:30:21.702331
2018-10-03 22:30:21,702 [salt.state       :1803][INFO    ][10804] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-10-03 22:30:21,743 [salt.fileclient  :1215][INFO    ][10804] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-10-03 22:30:21,761 [salt.state       :290 ][INFO    ][10804] File changed:
New file
2018-10-03 22:30:21,762 [salt.state       :1941][INFO    ][10804] Completed state [/etc/default/ceilometer-agent-central] at time 22:30:21.762092 duration_in_ms=59.759
2018-10-03 22:30:21,762 [salt.state       :1770][INFO    ][10804] Running state [/etc/default/ceilometer-agent-notification] at time 22:30:21.762500
2018-10-03 22:30:21,762 [salt.state       :1803][INFO    ][10804] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-10-03 22:30:21,827 [salt.state       :290 ][INFO    ][10804] File changed:
New file
2018-10-03 22:30:21,827 [salt.state       :1941][INFO    ][10804] Completed state [/etc/default/ceilometer-agent-notification] at time 22:30:21.827209 duration_in_ms=64.709
2018-10-03 22:30:21,862 [salt.state       :1770][INFO    ][10804] Running state [python-gnocchiclient] at time 22:30:21.861593
2018-10-03 22:30:21,864 [salt.state       :1803][INFO    ][10804] Executing state pkg.latest for [python-gnocchiclient]
2018-10-03 22:30:21,927 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-10-03 22:30:22,241 [salt.state       :290 ][INFO    ][10804] Package python-gnocchiclient is already up-to-date
2018-10-03 22:30:22,241 [salt.state       :1941][INFO    ][10804] Completed state [python-gnocchiclient] at time 22:30:22.241886 duration_in_ms=380.292
2018-10-03 22:30:22,250 [salt.state       :1770][INFO    ][10804] Running state [/etc/ceilometer/pipeline.yaml] at time 22:30:22.250746
2018-10-03 22:30:22,251 [salt.state       :1803][INFO    ][10804] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-10-03 22:30:22,270 [salt.fileclient  :1215][INFO    ][10804] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-10-03 22:30:22,398 [salt.state       :290 ][INFO    ][10804] File changed:
New file
2018-10-03 22:30:22,400 [salt.state       :1941][INFO    ][10804] Completed state [/etc/ceilometer/pipeline.yaml] at time 22:30:22.400588 duration_in_ms=149.843
2018-10-03 22:30:22,401 [salt.state       :1770][INFO    ][10804] Running state [/etc/ceilometer/event_pipeline.yaml] at time 22:30:22.400998
2018-10-03 22:30:22,401 [salt.state       :1803][INFO    ][10804] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-10-03 22:30:22,425 [salt.fileclient  :1215][INFO    ][10804] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-10-03 22:30:22,533 [salt.state       :290 ][INFO    ][10804] File changed:
New file
2018-10-03 22:30:22,538 [salt.state       :1941][INFO    ][10804] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 22:30:22.538348 duration_in_ms=137.349
2018-10-03 22:30:22,539 [salt.state       :1770][INFO    ][10804] Running state [/etc/ceilometer/event_definitions.yaml] at time 22:30:22.539159
2018-10-03 22:30:22,539 [salt.state       :1803][INFO    ][10804] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-10-03 22:30:22,567 [salt.fileclient  :1215][INFO    ][10804] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-10-03 22:30:22,587 [salt.state       :290 ][INFO    ][10804] File changed:
New file
2018-10-03 22:30:22,588 [salt.state       :1941][INFO    ][10804] Completed state [/etc/ceilometer/event_definitions.yaml] at time 22:30:22.588046 duration_in_ms=48.887
2018-10-03 22:30:22,588 [salt.state       :1770][INFO    ][10804] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 22:30:22.588463
2018-10-03 22:30:22,588 [salt.state       :1803][INFO    ][10804] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-10-03 22:30:22,631 [salt.fileclient  :1215][INFO    ][10804] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-10-03 22:30:22,640 [salt.state       :290 ][INFO    ][10804] File changed:
New file
2018-10-03 22:30:22,646 [salt.state       :1941][INFO    ][10804] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 22:30:22.646249 duration_in_ms=57.787
2018-10-03 22:30:23,241 [salt.state       :1770][INFO    ][10804] Running state [ceilometer-agent-central] at time 22:30:23.241241
2018-10-03 22:30:23,241 [salt.state       :1803][INFO    ][10804] Executing state service.running for [ceilometer-agent-central]
2018-10-03 22:30:23,242 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-10-03 22:30:23,255 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003223023244308
2018-10-03 22:30:23,269 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-03 22:30:23,292 [salt.minion      :1431][INFO    ][13652] Starting a new job with PID 13652
2018-10-03 22:30:23,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-03 22:30:23,324 [salt.minion      :1708][INFO    ][13652] Returning information for job: 20181003223023244308
2018-10-03 22:30:23,333 [salt.state       :290 ][INFO    ][10804] The service ceilometer-agent-central is already running
2018-10-03 22:30:23,333 [salt.state       :1941][INFO    ][10804] Completed state [ceilometer-agent-central] at time 22:30:23.333648 duration_in_ms=92.407
2018-10-03 22:30:23,334 [salt.state       :1770][INFO    ][10804] Running state [ceilometer-agent-central] at time 22:30:23.334022
2018-10-03 22:30:23,334 [salt.state       :1803][INFO    ][10804] Executing state service.mod_watch for [ceilometer-agent-central]
2018-10-03 22:30:23,335 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-03 22:30:23,359 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-03 22:30:23,568 [salt.state       :290 ][INFO    ][10804] {'ceilometer-agent-central': True}
2018-10-03 22:30:23,569 [salt.state       :1941][INFO    ][10804] Completed state [ceilometer-agent-central] at time 22:30:23.569713 duration_in_ms=235.69
2018-10-03 22:30:23,570 [salt.state       :1770][INFO    ][10804] Running state [ceilometer-agent-notification] at time 22:30:23.570949
2018-10-03 22:30:23,571 [salt.state       :1803][INFO    ][10804] Executing state service.running for [ceilometer-agent-notification]
2018-10-03 22:30:23,572 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-10-03 22:30:23,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-03 22:30:23,631 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-03 22:30:23,666 [salt.state       :290 ][INFO    ][10804] The service ceilometer-agent-notification is already running
2018-10-03 22:30:23,667 [salt.state       :1941][INFO    ][10804] Completed state [ceilometer-agent-notification] at time 22:30:23.667665 duration_in_ms=96.716
2018-10-03 22:30:23,668 [salt.state       :1770][INFO    ][10804] Running state [ceilometer-agent-notification] at time 22:30:23.668058
2018-10-03 22:30:23,668 [salt.state       :1803][INFO    ][10804] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-10-03 22:30:23,669 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-03 22:30:23,708 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10804] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-03 22:30:23,860 [salt.state       :290 ][INFO    ][10804] {'ceilometer-agent-notification': True}
2018-10-03 22:30:23,862 [salt.state       :1941][INFO    ][10804] Completed state [ceilometer-agent-notification] at time 22:30:23.862859 duration_in_ms=194.801
2018-10-03 22:30:23,868 [salt.minion      :1708][INFO    ][10804] Returning information for job: 20181003222937605067
2018-10-03 22:36:08,777 [salt.minion      :1307][INFO    ][3092] User sudo_ubuntu Executing command cp.push_dir with jid 20181003223608762551
2018-10-03 22:36:08,812 [salt.minion      :1431][INFO    ][13824] Starting a new job with PID 13824
