2018-10-03 11:01:52,113 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:53,148 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:53,154 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:53,158 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:53,161 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:56,597 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:56,603 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:56,607 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:57,722 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:57,729 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:57,732 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:57,735 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:58,883 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,073 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,077 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,083 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,088 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,093 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,098 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,102 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,105 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,108 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,111 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,114 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,117 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,120 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,123 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,126 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,129 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,132 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,135 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,138 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,140 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,143 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,146 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,149 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,152 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,154 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,157 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,160 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,163 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,165 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,168 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,171 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,174 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,176 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,179 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,182 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,185 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,187 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,190 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,193 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,196 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,198 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,201 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,204 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:01:59,206 [salt.utils.decorators:82  ][ERROR   ][1860] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-03 11:02:42,215 [salt.utils.decorators:613 ][WARNING ][1860] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-03 11:02:52,696 [salt.loaded.int.states.file:2150][WARNING ][1860] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-03 11:02:54,429 [salt.loaded.int.states.file:2150][WARNING ][1860] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-03 11:02:56,080 [salt.loaded.int.states.file:2150][WARNING ][1860] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-03 11:02:59,463 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3100] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-10-03 11:02:59,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3100] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-10-03 11:02:59,505 [salt.utils.parsers:1051][WARNING ][1496] Minion received a SIGTERM. Exiting.
2018-10-03 11:03:00,345 [salt.cli.daemons :293 ][INFO    ][3152] Setting up the Salt Minion "mdb01.mcp-ovs-dpdk-ha.local"
2018-10-03 11:03:00,433 [salt.cli.daemons :82  ][INFO    ][3152] Starting up the Salt Minion
2018-10-03 11:03:00,434 [salt.utils.event :1017][INFO    ][3152] Starting pull socket on /var/run/salt/minion/minion_event_19308d998f_pull.ipc
2018-10-03 11:03:00,985 [salt.minion      :976 ][INFO    ][3152] Creating minion process manager
2018-10-03 11:03:02,129 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3152] Executing command ['date', '+%z'] in directory '/root'
2018-10-03 11:03:02,156 [salt.utils.schedule:568 ][INFO    ][3152] Updating job settings for scheduled job: __mine_interval
2018-10-03 11:03:02,175 [salt.minion      :1107][INFO    ][3152] Added mine.update to scheduler
2018-10-03 11:03:02,329 [salt.minion      :1965][INFO    ][3152] Minion is starting as user 'root'
2018-10-03 11:03:02,345 [salt.minion      :2324][INFO    ][3152] Minion is ready to receive requests!
2018-10-03 11:04:23,671 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command state.apply with jid 20181003110423657006
2018-10-03 11:04:23,690 [salt.minion      :1431][INFO    ][3251] Starting a new job with PID 3251
2018-10-03 11:04:28,427 [salt.state       :905 ][INFO    ][3251] Loading fresh modules for state activity
2018-10-03 11:04:29,127 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110429119674
2018-10-03 11:04:29,154 [salt.minion      :1431][INFO    ][3258] Starting a new job with PID 3258
2018-10-03 11:04:29,172 [salt.minion      :1708][INFO    ][3258] Returning information for job: 20181003110429119674
2018-10-03 11:04:29,612 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-10-03 11:04:29,696 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-10-03 11:04:29,804 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-10-03 11:04:29,877 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-10-03 11:04:29,972 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-10-03 11:04:30,113 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-10-03 11:04:30,188 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-10-03 11:04:30,253 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-10-03 11:04:30,366 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-10-03 11:04:30,385 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-10-03 11:04:30,454 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-10-03 11:04:30,523 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-10-03 11:04:30,590 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-10-03 11:04:30,676 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-10-03 11:04:31,599 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-10-03 11:04:31,719 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2018-10-03 11:04:31,823 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-10-03 11:04:31,943 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-10-03 11:04:32,055 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-10-03 11:04:32,126 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-10-03 11:04:32,196 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-10-03 11:04:32,266 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-10-03 11:04:32,382 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-10-03 11:04:32,533 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-10-03 11:04:32,601 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-10-03 11:04:32,677 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-10-03 11:04:32,718 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-10-03 11:04:32,771 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-10-03 11:04:32,822 [salt.state       :1770][INFO    ][3251] Running state [/etc/environment] at time 11:04:32.822131
2018-10-03 11:04:32,822 [salt.state       :1803][INFO    ][3251] Executing state file.blockreplace for [/etc/environment]
2018-10-03 11:04:32,832 [salt.state       :290 ][INFO    ][3251] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-10-03 11:04:32,834 [salt.state       :1941][INFO    ][3251] Completed state [/etc/environment] at time 11:04:32.833998 duration_in_ms=11.868
2018-10-03 11:04:32,834 [salt.state       :1770][INFO    ][3251] Running state [/etc/profile.d] at time 11:04:32.834555
2018-10-03 11:04:32,834 [salt.state       :1803][INFO    ][3251] Executing state file.directory for [/etc/profile.d]
2018-10-03 11:04:32,847 [salt.state       :290 ][INFO    ][3251] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-10-03 11:04:32,848 [salt.state       :1941][INFO    ][3251] Completed state [/etc/profile.d] at time 11:04:32.848219 duration_in_ms=13.663
2018-10-03 11:04:33,384 [salt.state       :1770][INFO    ][3251] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 11:04:33.384502
2018-10-03 11:04:33,385 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-10-03 11:04:33,801 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-10-03 11:04:33,820 [salt.state       :290 ][INFO    ][3251] File changed:
New file
2018-10-03 11:04:33,821 [salt.state       :1941][INFO    ][3251] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 11:04:33.821081 duration_in_ms=436.58
2018-10-03 11:04:33,821 [salt.state       :1770][INFO    ][3251] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 11:04:33.821703
2018-10-03 11:04:33,822 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-10-03 11:04:33,839 [salt.state       :290 ][INFO    ][3251] File changed:
New file
2018-10-03 11:04:33,840 [salt.state       :1941][INFO    ][3251] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 11:04:33.840537 duration_in_ms=18.834
2018-10-03 11:04:33,841 [salt.state       :1770][INFO    ][3251] Running state [linux_repo_prereq_pkgs] at time 11:04:33.841774
2018-10-03 11:04:33,842 [salt.state       :1803][INFO    ][3251] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-10-03 11:04:33,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:04:34,158 [salt.state       :290 ][INFO    ][3251] All specified packages are already installed
2018-10-03 11:04:34,172 [salt.state       :1941][INFO    ][3251] Completed state [linux_repo_prereq_pkgs] at time 11:04:34.172010 duration_in_ms=330.236
2018-10-03 11:04:34,172 [salt.state       :1770][INFO    ][3251] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 11:04:34.172794
2018-10-03 11:04:34,173 [salt.state       :1803][INFO    ][3251] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-10-03 11:04:34,174 [salt.state       :290 ][INFO    ][3251] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-10-03 11:04:34,174 [salt.state       :1941][INFO    ][3251] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 11:04:34.174922 duration_in_ms=2.128
2018-10-03 11:04:34,175 [salt.state       :1770][INFO    ][3251] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 11:04:34.175475
2018-10-03 11:04:34,176 [salt.state       :1803][INFO    ][3251] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-10-03 11:04:34,176 [salt.state       :290 ][INFO    ][3251] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-10-03 11:04:34,177 [salt.state       :1941][INFO    ][3251] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 11:04:34.177152 duration_in_ms=1.677
2018-10-03 11:04:34,177 [salt.state       :1770][INFO    ][3251] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 11:04:34.177739
2018-10-03 11:04:34,178 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-10-03 11:04:34,194 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-10-03 11:04:34,254 [salt.state       :290 ][INFO    ][3251] File changed:
New file
2018-10-03 11:04:34,255 [salt.state       :1941][INFO    ][3251] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 11:04:34.255324 duration_in_ms=77.585
2018-10-03 11:04:34,257 [salt.state       :1770][INFO    ][3251] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 11:04:34.257692
2018-10-03 11:04:34,258 [salt.state       :1803][INFO    ][3251] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-10-03 11:04:35,315 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-10-03 11:04:35,798 [salt.state       :290 ][INFO    ][3251] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-10-03 11:04:35,799 [salt.state       :1941][INFO    ][3251] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 11:04:35.799254 duration_in_ms=1541.561
2018-10-03 11:04:35,800 [salt.state       :1770][INFO    ][3251] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 11:04:35.799977
2018-10-03 11:04:35,800 [salt.state       :1803][INFO    ][3251] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-10-03 11:04:35,801 [salt.state       :290 ][INFO    ][3251] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-10-03 11:04:35,802 [salt.state       :1941][INFO    ][3251] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 11:04:35.802194 duration_in_ms=2.217
2018-10-03 11:04:35,802 [salt.state       :1770][INFO    ][3251] Running state [/etc/apt/preferences.d/uca] at time 11:04:35.802779
2018-10-03 11:04:35,803 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-10-03 11:04:36,002 [salt.state       :290 ][INFO    ][3251] File changed:
New file
2018-10-03 11:04:36,002 [salt.state       :1941][INFO    ][3251] Completed state [/etc/apt/preferences.d/uca] at time 11:04:36.002504 duration_in_ms=199.724
2018-10-03 11:04:36,004 [salt.state       :1770][INFO    ][3251] Running state [echo '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' | base64 -d | apt-key add -] at time 11:04:36.004312
2018-10-03 11:04:36,004 [salt.state       :1803][INFO    ][3251] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-10-03 11:04:36,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-10-03 11:04:36,174 [salt.state       :290 ][INFO    ][3251] {'pid': 3462, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-10-03 11:04:36,175 [salt.state       :1941][INFO    ][3251] Completed state [echo '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' | base64 -d | apt-key add -] at time 11:04:36.174978 duration_in_ms=170.666
2018-10-03 11:04:36,179 [salt.state       :1770][INFO    ][3251] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 11:04:36.179110
2018-10-03 11:04:36,179 [salt.state       :1803][INFO    ][3251] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-10-03 11:04:36,249 [salt.state       :290 ][INFO    ][3251] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-10-03 11:04:36,249 [salt.state       :1941][INFO    ][3251] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 11:04:36.249893 duration_in_ms=70.783
2018-10-03 11:04:36,250 [salt.state       :1770][INFO    ][3251] Running state [pkg.refresh_db] at time 11:04:36.250785
2018-10-03 11:04:36,251 [salt.state       :1803][INFO    ][3251] Executing state module.run for [pkg.refresh_db]
2018-10-03 11:04:36,251 [salt.utils.decorators:613 ][WARNING ][3251] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-03 11:04:36,251 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 11:04:39,339 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110439324691
2018-10-03 11:04:39,858 [salt.minion      :1431][INFO    ][3935] Starting a new job with PID 3935
2018-10-03 11:04:39,875 [salt.minion      :1708][INFO    ][3935] Returning information for job: 20181003110439324691
2018-10-03 11:04:41,369 [salt.state       :290 ][INFO    ][3251] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-10-03 11:04:41,370 [salt.state       :1941][INFO    ][3251] Completed state [pkg.refresh_db] at time 11:04:41.370370 duration_in_ms=5119.584
2018-10-03 11:04:41,371 [salt.state       :1770][INFO    ][3251] Running state [linux_extra_packages_latest] at time 11:04:41.370991
2018-10-03 11:04:41,371 [salt.state       :1803][INFO    ][3251] Executing state pkg.latest for [linux_extra_packages_latest]
2018-10-03 11:04:41,383 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-10-03 11:04:41,529 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 11:04:41,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-10-03 11:04:49,424 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110449408777
2018-10-03 11:04:49,443 [salt.minion      :1431][INFO    ][4030] Starting a new job with PID 4030
2018-10-03 11:04:49,466 [salt.minion      :1708][INFO    ][4030] Returning information for job: 20181003110449408777
2018-10-03 11:04:52,058 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:04:52,087 [salt.state       :290 ][INFO    ][3251] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-10-03 11:04:52,109 [salt.state       :905 ][INFO    ][3251] Loading fresh modules for state activity
2018-10-03 11:04:52,136 [salt.state       :1941][INFO    ][3251] Completed state [linux_extra_packages_latest] at time 11:04:52.136497 duration_in_ms=10765.505
2018-10-03 11:04:52,141 [salt.state       :1770][INFO    ][3251] Running state [UTC] at time 11:04:52.141422
2018-10-03 11:04:52,141 [salt.state       :1803][INFO    ][3251] Executing state timezone.system for [UTC]
2018-10-03 11:04:52,147 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['timedatectl'] in directory '/root'
2018-10-03 11:04:52,303 [salt.state       :290 ][INFO    ][3251] Timezone UTC already set, UTC already set to UTC
2018-10-03 11:04:52,304 [salt.state       :1941][INFO    ][3251] Completed state [UTC] at time 11:04:52.304644 duration_in_ms=163.22
2018-10-03 11:04:52,308 [salt.state       :1770][INFO    ][3251] Running state [/etc/default/grub.d] at time 11:04:52.308268
2018-10-03 11:04:52,308 [salt.state       :1803][INFO    ][3251] Executing state file.directory for [/etc/default/grub.d]
2018-10-03 11:04:52,314 [salt.state       :290 ][INFO    ][3251] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-10-03 11:04:52,315 [salt.state       :1941][INFO    ][3251] Completed state [/etc/default/grub.d] at time 11:04:52.315065 duration_in_ms=6.797
2018-10-03 11:04:52,318 [salt.state       :1770][INFO    ][3251] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 11:04:52.318559
2018-10-03 11:04:52,318 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2018-10-03 11:04:52,611 [salt.state       :290 ][INFO    ][3251] File changed:
New file
2018-10-03 11:04:52,611 [salt.state       :1941][INFO    ][3251] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 11:04:52.611480 duration_in_ms=292.919
2018-10-03 11:04:52,613 [salt.state       :1770][INFO    ][3251] Running state [update-grub] at time 11:04:52.613145
2018-10-03 11:04:52,613 [salt.state       :1803][INFO    ][3251] Executing state cmd.wait for [update-grub]
2018-10-03 11:04:52,614 [salt.state       :290 ][INFO    ][3251] No changes made for update-grub
2018-10-03 11:04:52,614 [salt.state       :1941][INFO    ][3251] Completed state [update-grub] at time 11:04:52.614589 duration_in_ms=1.445
2018-10-03 11:04:52,615 [salt.state       :1770][INFO    ][3251] Running state [update-grub] at time 11:04:52.614953
2018-10-03 11:04:52,615 [salt.state       :1803][INFO    ][3251] Executing state cmd.mod_watch for [update-grub]
2018-10-03 11:04:52,617 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'update-grub' in directory '/root'
2018-10-03 11:04:55,108 [salt.state       :290 ][INFO    ][3251] {'pid': 4129, 'retcode': 0, 'stderr': 'Generating grub configuration file ...\nFound linux image: /boot/vmlinuz-4.15.0-34-generic\nFound initrd image: /boot/initrd.img-4.15.0-34-generic\nFound linux image: /boot/vmlinuz-4.4.0-135-generic\nFound initrd image: /boot/initrd.img-4.4.0-135-generic\ndone', 'stdout': ''}
2018-10-03 11:04:55,110 [salt.state       :1941][INFO    ][3251] Completed state [update-grub] at time 11:04:55.109981 duration_in_ms=2495.026
2018-10-03 11:04:55,116 [salt.state       :1770][INFO    ][3251] Running state [nf_conntrack] at time 11:04:55.116868
2018-10-03 11:04:55,117 [salt.state       :1803][INFO    ][3251] Executing state kmod.present for [nf_conntrack]
2018-10-03 11:04:55,118 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'lsmod' in directory '/root'
2018-10-03 11:04:57,210 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'lsmod' in directory '/root'
2018-10-03 11:04:57,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-10-03 11:04:57,293 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'lsmod' in directory '/root'
2018-10-03 11:04:57,377 [salt.state       :290 ][INFO    ][3251] {'nf_conntrack': 'loaded'}
2018-10-03 11:04:57,378 [salt.state       :1941][INFO    ][3251] Completed state [nf_conntrack] at time 11:04:57.377980 duration_in_ms=2261.113
2018-10-03 11:04:57,380 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.tcp_keepalive_probes] at time 11:04:57.380889
2018-10-03 11:04:57,381 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-10-03 11:04:57,382 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-10-03 11:04:57,485 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.tcp_keepalive_probes': 8}
2018-10-03 11:04:57,486 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.tcp_keepalive_probes] at time 11:04:57.486631 duration_in_ms=105.74
2018-10-03 11:04:57,487 [salt.state       :1770][INFO    ][3251] Running state [fs.file-max] at time 11:04:57.487491
2018-10-03 11:04:57,488 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [fs.file-max]
2018-10-03 11:04:57,490 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-10-03 11:04:57,507 [salt.state       :290 ][INFO    ][3251] {'fs.file-max': 124165}
2018-10-03 11:04:57,507 [salt.state       :1941][INFO    ][3251] Completed state [fs.file-max] at time 11:04:57.507332 duration_in_ms=19.842
2018-10-03 11:04:57,507 [salt.state       :1770][INFO    ][3251] Running state [net.core.somaxconn] at time 11:04:57.507927
2018-10-03 11:04:57,508 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.core.somaxconn]
2018-10-03 11:04:57,515 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-10-03 11:04:57,529 [salt.state       :290 ][INFO    ][3251] {'net.core.somaxconn': 4096}
2018-10-03 11:04:57,530 [salt.state       :1941][INFO    ][3251] Completed state [net.core.somaxconn] at time 11:04:57.529995 duration_in_ms=22.067
2018-10-03 11:04:57,530 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.tcp_max_syn_backlog] at time 11:04:57.530857
2018-10-03 11:04:57,531 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-10-03 11:04:57,533 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-10-03 11:04:57,548 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-10-03 11:04:57,549 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.tcp_max_syn_backlog] at time 11:04:57.549355 duration_in_ms=18.498
2018-10-03 11:04:57,550 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.tcp_tw_reuse] at time 11:04:57.550104
2018-10-03 11:04:57,550 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-10-03 11:04:57,623 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-10-03 11:04:57,640 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.tcp_tw_reuse': 1}
2018-10-03 11:04:57,641 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.tcp_tw_reuse] at time 11:04:57.641756 duration_in_ms=91.651
2018-10-03 11:04:57,642 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.tcp_congestion_control] at time 11:04:57.642609
2018-10-03 11:04:57,643 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-10-03 11:04:57,645 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-10-03 11:04:57,787 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-10-03 11:04:57,788 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.tcp_congestion_control] at time 11:04:57.788289 duration_in_ms=145.68
2018-10-03 11:04:57,789 [salt.state       :1770][INFO    ][3251] Running state [net.nf_conntrack_max] at time 11:04:57.789254
2018-10-03 11:04:57,790 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.nf_conntrack_max]
2018-10-03 11:04:57,792 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-10-03 11:04:57,811 [salt.state       :290 ][INFO    ][3251] {'net.nf_conntrack_max': 1048576}
2018-10-03 11:04:57,811 [salt.state       :1941][INFO    ][3251] Completed state [net.nf_conntrack_max] at time 11:04:57.811916 duration_in_ms=22.663
2018-10-03 11:04:57,812 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.tcp_retries2] at time 11:04:57.812518
2018-10-03 11:04:57,813 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-10-03 11:04:57,987 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-10-03 11:04:58,010 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.tcp_retries2': 5}
2018-10-03 11:04:58,012 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.tcp_retries2] at time 11:04:58.012016 duration_in_ms=199.496
2018-10-03 11:04:58,013 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.tcp_fin_timeout] at time 11:04:58.013301
2018-10-03 11:04:58,014 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-10-03 11:04:58,016 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-10-03 11:04:58,031 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.tcp_fin_timeout': 30}
2018-10-03 11:04:58,032 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.tcp_fin_timeout] at time 11:04:58.031909 duration_in_ms=18.609
2018-10-03 11:04:58,032 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.tcp_slow_start_after_idle] at time 11:04:58.032650
2018-10-03 11:04:58,033 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-10-03 11:04:58,130 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-10-03 11:04:58,148 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-10-03 11:04:58,149 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 11:04:58.149044 duration_in_ms=116.394
2018-10-03 11:04:58,149 [salt.state       :1770][INFO    ][3251] Running state [vm.swappiness] at time 11:04:58.149662
2018-10-03 11:04:58,150 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [vm.swappiness]
2018-10-03 11:04:58,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-10-03 11:04:58,343 [salt.state       :290 ][INFO    ][3251] {'vm.swappiness': 10}
2018-10-03 11:04:58,344 [salt.state       :1941][INFO    ][3251] Completed state [vm.swappiness] at time 11:04:58.344805 duration_in_ms=195.142
2018-10-03 11:04:58,346 [salt.state       :1770][INFO    ][3251] Running state [net.core.netdev_max_backlog] at time 11:04:58.346006
2018-10-03 11:04:58,347 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-10-03 11:04:58,349 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-10-03 11:04:58,363 [salt.state       :290 ][INFO    ][3251] {'net.core.netdev_max_backlog': 261144}
2018-10-03 11:04:58,363 [salt.state       :1941][INFO    ][3251] Completed state [net.core.netdev_max_backlog] at time 11:04:58.363812 duration_in_ms=17.806
2018-10-03 11:04:58,364 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.neigh.default.gc_thresh1] at time 11:04:58.364447
2018-10-03 11:04:58,364 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-10-03 11:04:58,497 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-10-03 11:04:58,519 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-10-03 11:04:58,520 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 11:04:58.520720 duration_in_ms=156.273
2018-10-03 11:04:58,521 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.neigh.default.gc_thresh2] at time 11:04:58.521589
2018-10-03 11:04:58,522 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-10-03 11:04:58,533 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-10-03 11:04:58,553 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-10-03 11:04:58,554 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 11:04:58.554408 duration_in_ms=32.819
2018-10-03 11:04:58,555 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.neigh.default.gc_thresh3] at time 11:04:58.555130
2018-10-03 11:04:58,555 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-10-03 11:04:58,840 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-10-03 11:04:58,862 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-10-03 11:04:58,863 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 11:04:58.863004 duration_in_ms=307.874
2018-10-03 11:04:58,863 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.tcp_keepalive_intvl] at time 11:04:58.863682
2018-10-03 11:04:58,864 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-10-03 11:04:58,895 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-10-03 11:04:58,915 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-10-03 11:04:58,916 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.tcp_keepalive_intvl] at time 11:04:58.915959 duration_in_ms=52.276
2018-10-03 11:04:58,916 [salt.state       :1770][INFO    ][3251] Running state [net.ipv4.tcp_keepalive_time] at time 11:04:58.916718
2018-10-03 11:04:58,917 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-10-03 11:04:58,997 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-10-03 11:04:59,018 [salt.state       :290 ][INFO    ][3251] {'net.ipv4.tcp_keepalive_time': 30}
2018-10-03 11:04:59,019 [salt.state       :1941][INFO    ][3251] Completed state [net.ipv4.tcp_keepalive_time] at time 11:04:59.019663 duration_in_ms=102.944
2018-10-03 11:04:59,020 [salt.state       :1770][INFO    ][3251] Running state [kernel.panic] at time 11:04:59.020520
2018-10-03 11:04:59,021 [salt.state       :1803][INFO    ][3251] Executing state sysctl.present for [kernel.panic]
2018-10-03 11:04:59,023 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-10-03 11:04:59,037 [salt.state       :290 ][INFO    ][3251] {'kernel.panic': 60}
2018-10-03 11:04:59,038 [salt.state       :1941][INFO    ][3251] Completed state [kernel.panic] at time 11:04:59.037967 duration_in_ms=17.446
2018-10-03 11:04:59,044 [salt.state       :1770][INFO    ][3251] Running state [linux_sysfs_package] at time 11:04:59.044676
2018-10-03 11:04:59,045 [salt.state       :1803][INFO    ][3251] Executing state pkg.installed for [linux_sysfs_package]
2018-10-03 11:04:59,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-10-03 11:04:59,564 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110459550270
2018-10-03 11:04:59,578 [salt.minion      :1431][INFO    ][4588] Starting a new job with PID 4588
2018-10-03 11:04:59,598 [salt.minion      :1708][INFO    ][4588] Returning information for job: 20181003110459550270
2018-10-03 11:04:59,672 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 11:05:01,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 11:05:01,895 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-10-03 11:05:09,598 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110509582050
2018-10-03 11:05:09,620 [salt.minion      :1431][INFO    ][5003] Starting a new job with PID 5003
2018-10-03 11:05:09,642 [salt.minion      :1708][INFO    ][5003] Returning information for job: 20181003110509582050
2018-10-03 11:05:19,635 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110519618783
2018-10-03 11:05:19,662 [salt.minion      :1431][INFO    ][5354] Starting a new job with PID 5354
2018-10-03 11:05:19,682 [salt.minion      :1708][INFO    ][5354] Returning information for job: 20181003110519618783
2018-10-03 11:05:19,984 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:05:20,018 [salt.state       :290 ][INFO    ][3251] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-10-03 11:05:20,033 [salt.state       :905 ][INFO    ][3251] Loading fresh modules for state activity
2018-10-03 11:05:20,069 [salt.state       :1941][INFO    ][3251] Completed state [linux_sysfs_package] at time 11:05:20.068925 duration_in_ms=21024.247
2018-10-03 11:05:20,077 [salt.state       :1770][INFO    ][3251] Running state [/etc/sysfs.d] at time 11:05:20.077889
2018-10-03 11:05:20,078 [salt.state       :1803][INFO    ][3251] Executing state file.directory for [/etc/sysfs.d]
2018-10-03 11:05:20,081 [salt.state       :290 ][INFO    ][3251] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-10-03 11:05:20,081 [salt.state       :1941][INFO    ][3251] Completed state [/etc/sysfs.d] at time 11:05:20.081508 duration_in_ms=3.619
2018-10-03 11:05:20,413 [salt.state       :1770][INFO    ][3251] Running state [ondemand] at time 11:05:20.413399
2018-10-03 11:05:20,413 [salt.state       :1803][INFO    ][3251] Executing state service.dead for [ondemand]
2018-10-03 11:05:20,414 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-10-03 11:05:20,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-03 11:05:20,437 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-03 11:05:20,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-10-03 11:05:20,490 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-03 11:05:20,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-03 11:05:20,518 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-03 11:05:20,538 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-10-03 11:05:20,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-03 11:05:20,773 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'runlevel' in directory '/root'
2018-10-03 11:05:20,783 [salt.state       :290 ][INFO    ][3251] {'ondemand': True}
2018-10-03 11:05:20,784 [salt.state       :1941][INFO    ][3251] Completed state [ondemand] at time 11:05:20.784011 duration_in_ms=370.612
2018-10-03 11:05:20,785 [salt.state       :1770][INFO    ][3251] Running state [en_US.UTF-8] at time 11:05:20.784989
2018-10-03 11:05:20,785 [salt.state       :1803][INFO    ][3251] Executing state locale.present for [en_US.UTF-8]
2018-10-03 11:05:20,786 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'locale -a' in directory '/root'
2018-10-03 11:05:20,794 [salt.state       :290 ][INFO    ][3251] Locale en_US.UTF-8 is already present
2018-10-03 11:05:20,795 [salt.state       :1941][INFO    ][3251] Completed state [en_US.UTF-8] at time 11:05:20.795124 duration_in_ms=10.135
2018-10-03 11:05:20,796 [salt.state       :1770][INFO    ][3251] Running state [en_US.UTF-8] at time 11:05:20.796595
2018-10-03 11:05:20,797 [salt.state       :1803][INFO    ][3251] Executing state locale.system for [en_US.UTF-8]
2018-10-03 11:05:20,797 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'localectl' in directory '/root'
2018-10-03 11:05:21,155 [salt.state       :290 ][INFO    ][3251] System locale en_US.UTF-8 already set
2018-10-03 11:05:21,156 [salt.state       :1941][INFO    ][3251] Completed state [en_US.UTF-8] at time 11:05:21.156238 duration_in_ms=359.641
2018-10-03 11:05:21,158 [salt.state       :1770][INFO    ][3251] Running state [root] at time 11:05:21.158417
2018-10-03 11:05:21,159 [salt.state       :1803][INFO    ][3251] Executing state group.present for [root]
2018-10-03 11:05:21,160 [salt.state       :290 ][INFO    ][3251] Group root is present and up to date
2018-10-03 11:05:21,160 [salt.state       :1941][INFO    ][3251] Completed state [root] at time 11:05:21.160496 duration_in_ms=2.079
2018-10-03 11:05:21,165 [salt.state       :1770][INFO    ][3251] Running state [root] at time 11:05:21.165575
2018-10-03 11:05:21,166 [salt.state       :1803][INFO    ][3251] Executing state user.present for [root]
2018-10-03 11:05:21,174 [salt.state       :290 ][INFO    ][3251] User root is present and up to date
2018-10-03 11:05:21,174 [salt.state       :1941][INFO    ][3251] Completed state [root] at time 11:05:21.174245 duration_in_ms=8.671
2018-10-03 11:05:21,175 [salt.state       :1770][INFO    ][3251] Running state [/root] at time 11:05:21.175071
2018-10-03 11:05:21,175 [salt.state       :1803][INFO    ][3251] Executing state file.directory for [/root]
2018-10-03 11:05:21,175 [salt.state       :290 ][INFO    ][3251] Directory /root is in the correct state
Directory /root updated
2018-10-03 11:05:21,176 [salt.state       :1941][INFO    ][3251] Completed state [/root] at time 11:05:21.176106 duration_in_ms=1.036
2018-10-03 11:05:21,176 [salt.state       :1770][INFO    ][3251] Running state [/etc/sudoers.d/90-salt-user-root] at time 11:05:21.176337
2018-10-03 11:05:21,176 [salt.state       :1803][INFO    ][3251] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-10-03 11:05:21,176 [salt.state       :290 ][INFO    ][3251] File /etc/sudoers.d/90-salt-user-root is not present
2018-10-03 11:05:21,176 [salt.state       :1941][INFO    ][3251] Completed state [/etc/sudoers.d/90-salt-user-root] at time 11:05:21.176914 duration_in_ms=0.577
2018-10-03 11:05:21,177 [salt.state       :1770][INFO    ][3251] Running state [ubuntu] at time 11:05:21.177089
2018-10-03 11:05:21,177 [salt.state       :1803][INFO    ][3251] Executing state group.present for [ubuntu]
2018-10-03 11:05:21,177 [salt.state       :290 ][INFO    ][3251] Group ubuntu is present and up to date
2018-10-03 11:05:21,177 [salt.state       :1941][INFO    ][3251] Completed state [ubuntu] at time 11:05:21.177687 duration_in_ms=0.597
2018-10-03 11:05:21,178 [salt.state       :1770][INFO    ][3251] Running state [ubuntu] at time 11:05:21.178314
2018-10-03 11:05:21,178 [salt.state       :1803][INFO    ][3251] Executing state user.present for [ubuntu]
2018-10-03 11:05:21,181 [salt.state       :290 ][INFO    ][3251] {'passwd': 'XXX-REDACTED-XXX'}
2018-10-03 11:05:21,181 [salt.state       :1941][INFO    ][3251] Completed state [ubuntu] at time 11:05:21.181362 duration_in_ms=3.047
2018-10-03 11:05:21,182 [salt.state       :1770][INFO    ][3251] Running state [/home/ubuntu] at time 11:05:21.182444
2018-10-03 11:05:21,182 [salt.state       :1803][INFO    ][3251] Executing state file.directory for [/home/ubuntu]
2018-10-03 11:05:21,183 [salt.state       :290 ][INFO    ][3251] {'mode': '0700'}
2018-10-03 11:05:21,184 [salt.state       :1941][INFO    ][3251] Completed state [/home/ubuntu] at time 11:05:21.184065 duration_in_ms=1.621
2018-10-03 11:05:21,184 [salt.state       :1770][INFO    ][3251] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 11:05:21.184834
2018-10-03 11:05:21,185 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-10-03 11:05:21,200 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-10-03 11:05:21,211 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.DLa5CI' in directory '/root'
2018-10-03 11:05:21,475 [salt.state       :290 ][INFO    ][3251] File changed:
New file
2018-10-03 11:05:21,476 [salt.state       :1941][INFO    ][3251] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 11:05:21.476689 duration_in_ms=291.853
2018-10-03 11:05:21,477 [salt.state       :1770][INFO    ][3251] Running state [/etc/security/limits.d/90-salt-default.conf] at time 11:05:21.477449
2018-10-03 11:05:21,477 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-10-03 11:05:21,583 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-10-03 11:05:21,642 [salt.state       :290 ][INFO    ][3251] File changed:
New file
2018-10-03 11:05:21,643 [salt.state       :1941][INFO    ][3251] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 11:05:21.643057 duration_in_ms=165.608
2018-10-03 11:05:21,643 [salt.state       :1770][INFO    ][3251] Running state [apt-daily.timer] at time 11:05:21.643277
2018-10-03 11:05:21,643 [salt.state       :1803][INFO    ][3251] Executing state service.dead for [apt-daily.timer]
2018-10-03 11:05:21,644 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'status', 'apt-daily.timer', '-n', '0'] in directory '/root'
2018-10-03 11:05:21,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-10-03 11:05:21,682 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-10-03 11:05:21,700 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'apt-daily.timer'] in directory '/root'
2018-10-03 11:05:21,730 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-10-03 11:05:21,752 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-10-03 11:05:21,772 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-10-03 11:05:21,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'apt-daily.timer'] in directory '/root'
2018-10-03 11:05:22,058 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-10-03 11:05:22,081 [salt.state       :290 ][INFO    ][3251] {'apt-daily.timer': True}
2018-10-03 11:05:22,082 [salt.state       :1941][INFO    ][3251] Completed state [apt-daily.timer] at time 11:05:22.082084 duration_in_ms=438.806
2018-10-03 11:05:22,082 [salt.state       :1770][INFO    ][3251] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 11:05:22.082663
2018-10-03 11:05:22,083 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-10-03 11:05:22,100 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-10-03 11:05:22,172 [salt.state       :290 ][INFO    ][3251] File changed:
New file
2018-10-03 11:05:22,173 [salt.state       :1941][INFO    ][3251] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 11:05:22.173689 duration_in_ms=91.026
2018-10-03 11:05:22,175 [salt.state       :1770][INFO    ][3251] Running state [service.systemctl_reload] at time 11:05:22.175867
2018-10-03 11:05:22,176 [salt.state       :1803][INFO    ][3251] Executing state module.wait for [service.systemctl_reload]
2018-10-03 11:05:22,176 [salt.state       :290 ][INFO    ][3251] No changes made for service.systemctl_reload
2018-10-03 11:05:22,177 [salt.state       :1941][INFO    ][3251] Completed state [service.systemctl_reload] at time 11:05:22.177063 duration_in_ms=1.196
2018-10-03 11:05:22,177 [salt.state       :1770][INFO    ][3251] Running state [service.systemctl_reload] at time 11:05:22.177400
2018-10-03 11:05:22,177 [salt.state       :1803][INFO    ][3251] Executing state module.mod_watch for [service.systemctl_reload]
2018-10-03 11:05:22,178 [salt.utils.decorators:613 ][WARNING ][3251] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-03 11:05:22,178 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-10-03 11:05:22,290 [salt.state       :290 ][INFO    ][3251] {'ret': True}
2018-10-03 11:05:22,291 [salt.state       :1941][INFO    ][3251] Completed state [service.systemctl_reload] at time 11:05:22.291813 duration_in_ms=114.412
2018-10-03 11:05:22,293 [salt.state       :1770][INFO    ][3251] Running state [/etc/issue] at time 11:05:22.293708
2018-10-03 11:05:22,295 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/issue]
2018-10-03 11:05:22,410 [salt.state       :290 ][INFO    ][3251] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-10-03 11:05:22,413 [salt.state       :1941][INFO    ][3251] Completed state [/etc/issue] at time 11:05:22.412956 duration_in_ms=119.247
2018-10-03 11:05:22,413 [salt.state       :1770][INFO    ][3251] Running state [/etc/hostname] at time 11:05:22.413668
2018-10-03 11:05:22,414 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/hostname]
2018-10-03 11:05:22,436 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-10-03 11:05:22,446 [salt.state       :290 ][INFO    ][3251] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb01

2018-10-03 11:05:22,446 [salt.state       :1941][INFO    ][3251] Completed state [/etc/hostname] at time 11:05:22.446794 duration_in_ms=33.126
2018-10-03 11:05:22,448 [salt.state       :1770][INFO    ][3251] Running state [hostname mdb01] at time 11:05:22.448895
2018-10-03 11:05:22,449 [salt.state       :1803][INFO    ][3251] Executing state cmd.run for [hostname mdb01]
2018-10-03 11:05:22,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'test "$(hostname)" = "mdb01"' in directory '/root'
2018-10-03 11:05:22,463 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command 'hostname mdb01' in directory '/root'
2018-10-03 11:05:22,474 [salt.state       :290 ][INFO    ][3251] {'pid': 5616, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-03 11:05:22,475 [salt.state       :1941][INFO    ][3251] Completed state [hostname mdb01] at time 11:05:22.475233 duration_in_ms=26.339
2018-10-03 11:05:22,476 [salt.state       :1770][INFO    ][3251] Running state [mdb02] at time 11:05:22.476317
2018-10-03 11:05:22,476 [salt.state       :1803][INFO    ][3251] Executing state host.present for [mdb02]
2018-10-03 11:05:22,477 [salt.state       :290 ][INFO    ][3251] {'host': 'mdb02'}
2018-10-03 11:05:22,477 [salt.state       :1941][INFO    ][3251] Completed state [mdb02] at time 11:05:22.477795 duration_in_ms=1.479
2018-10-03 11:05:22,478 [salt.state       :1770][INFO    ][3251] Running state [mdb02.mcp-ovs-dpdk-ha.local] at time 11:05:22.478114
2018-10-03 11:05:22,478 [salt.state       :1803][INFO    ][3251] Executing state host.present for [mdb02.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,531 [salt.state       :290 ][INFO    ][3251] {'host': 'mdb02.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,532 [salt.state       :1941][INFO    ][3251] Completed state [mdb02.mcp-ovs-dpdk-ha.local] at time 11:05:22.532278 duration_in_ms=54.163
2018-10-03 11:05:22,533 [salt.state       :1770][INFO    ][3251] Running state [mdb03] at time 11:05:22.533024
2018-10-03 11:05:22,533 [salt.state       :1803][INFO    ][3251] Executing state host.present for [mdb03]
2018-10-03 11:05:22,537 [salt.state       :290 ][INFO    ][3251] {'host': 'mdb03'}
2018-10-03 11:05:22,538 [salt.state       :1941][INFO    ][3251] Completed state [mdb03] at time 11:05:22.537946 duration_in_ms=4.922
2018-10-03 11:05:22,538 [salt.state       :1770][INFO    ][3251] Running state [mdb03.mcp-ovs-dpdk-ha.local] at time 11:05:22.538584
2018-10-03 11:05:22,539 [salt.state       :1803][INFO    ][3251] Executing state host.present for [mdb03.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,543 [salt.state       :290 ][INFO    ][3251] {'host': 'mdb03.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,543 [salt.state       :1941][INFO    ][3251] Completed state [mdb03.mcp-ovs-dpdk-ha.local] at time 11:05:22.543539 duration_in_ms=4.956
2018-10-03 11:05:22,543 [salt.state       :1770][INFO    ][3251] Running state [mdb01] at time 11:05:22.543860
2018-10-03 11:05:22,544 [salt.state       :1803][INFO    ][3251] Executing state host.present for [mdb01]
2018-10-03 11:05:22,549 [salt.state       :290 ][INFO    ][3251] {'host': 'mdb01'}
2018-10-03 11:05:22,549 [salt.state       :1941][INFO    ][3251] Completed state [mdb01] at time 11:05:22.549587 duration_in_ms=5.727
2018-10-03 11:05:22,549 [salt.state       :1770][INFO    ][3251] Running state [mdb01.mcp-ovs-dpdk-ha.local] at time 11:05:22.549917
2018-10-03 11:05:22,550 [salt.state       :1803][INFO    ][3251] Executing state host.present for [mdb01.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,555 [salt.state       :290 ][INFO    ][3251] {'host': 'mdb01.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,555 [salt.state       :1941][INFO    ][3251] Completed state [mdb01.mcp-ovs-dpdk-ha.local] at time 11:05:22.555712 duration_in_ms=5.795
2018-10-03 11:05:22,556 [salt.state       :1770][INFO    ][3251] Running state [mdb] at time 11:05:22.556167
2018-10-03 11:05:22,556 [salt.state       :1803][INFO    ][3251] Executing state host.present for [mdb]
2018-10-03 11:05:22,563 [salt.state       :290 ][INFO    ][3251] {'host': 'mdb'}
2018-10-03 11:05:22,563 [salt.state       :1941][INFO    ][3251] Completed state [mdb] at time 11:05:22.563671 duration_in_ms=7.504
2018-10-03 11:05:22,564 [salt.state       :1770][INFO    ][3251] Running state [mdb.mcp-ovs-dpdk-ha.local] at time 11:05:22.564012
2018-10-03 11:05:22,564 [salt.state       :1803][INFO    ][3251] Executing state host.present for [mdb.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,567 [salt.state       :290 ][INFO    ][3251] {'host': 'mdb.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,567 [salt.state       :1941][INFO    ][3251] Completed state [mdb.mcp-ovs-dpdk-ha.local] at time 11:05:22.567704 duration_in_ms=3.692
2018-10-03 11:05:22,568 [salt.state       :1770][INFO    ][3251] Running state [cfg01] at time 11:05:22.568048
2018-10-03 11:05:22,568 [salt.state       :1803][INFO    ][3251] Executing state host.present for [cfg01]
2018-10-03 11:05:22,573 [salt.state       :290 ][INFO    ][3251] {'host': 'cfg01'}
2018-10-03 11:05:22,573 [salt.state       :1941][INFO    ][3251] Completed state [cfg01] at time 11:05:22.573723 duration_in_ms=5.675
2018-10-03 11:05:22,574 [salt.state       :1770][INFO    ][3251] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 11:05:22.574260
2018-10-03 11:05:22,574 [salt.state       :1803][INFO    ][3251] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,603 [salt.state       :290 ][INFO    ][3251] {'host': 'cfg01.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,604 [salt.state       :1941][INFO    ][3251] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 11:05:22.604281 duration_in_ms=30.021
2018-10-03 11:05:22,605 [salt.state       :1770][INFO    ][3251] Running state [prx01] at time 11:05:22.604967
2018-10-03 11:05:22,605 [salt.state       :1803][INFO    ][3251] Executing state host.present for [prx01]
2018-10-03 11:05:22,609 [salt.state       :290 ][INFO    ][3251] {'host': 'prx01'}
2018-10-03 11:05:22,609 [salt.state       :1941][INFO    ][3251] Completed state [prx01] at time 11:05:22.609891 duration_in_ms=4.924
2018-10-03 11:05:22,610 [salt.state       :1770][INFO    ][3251] Running state [prx01.mcp-ovs-dpdk-ha.local] at time 11:05:22.610426
2018-10-03 11:05:22,610 [salt.state       :1803][INFO    ][3251] Executing state host.present for [prx01.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,615 [salt.state       :290 ][INFO    ][3251] {'host': 'prx01.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,615 [salt.state       :1941][INFO    ][3251] Completed state [prx01.mcp-ovs-dpdk-ha.local] at time 11:05:22.615781 duration_in_ms=5.356
2018-10-03 11:05:22,616 [salt.state       :1770][INFO    ][3251] Running state [kvm01] at time 11:05:22.616380
2018-10-03 11:05:22,616 [salt.state       :1803][INFO    ][3251] Executing state host.present for [kvm01]
2018-10-03 11:05:22,621 [salt.state       :290 ][INFO    ][3251] {'host': 'kvm01'}
2018-10-03 11:05:22,621 [salt.state       :1941][INFO    ][3251] Completed state [kvm01] at time 11:05:22.621698 duration_in_ms=5.319
2018-10-03 11:05:22,622 [salt.state       :1770][INFO    ][3251] Running state [kvm01.mcp-ovs-dpdk-ha.local] at time 11:05:22.622077
2018-10-03 11:05:22,622 [salt.state       :1803][INFO    ][3251] Executing state host.present for [kvm01.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,627 [salt.state       :290 ][INFO    ][3251] {'host': 'kvm01.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,627 [salt.state       :1941][INFO    ][3251] Completed state [kvm01.mcp-ovs-dpdk-ha.local] at time 11:05:22.627683 duration_in_ms=5.606
2018-10-03 11:05:22,628 [salt.state       :1770][INFO    ][3251] Running state [kvm03] at time 11:05:22.628060
2018-10-03 11:05:22,628 [salt.state       :1803][INFO    ][3251] Executing state host.present for [kvm03]
2018-10-03 11:05:22,633 [salt.state       :290 ][INFO    ][3251] {'host': 'kvm03'}
2018-10-03 11:05:22,633 [salt.state       :1941][INFO    ][3251] Completed state [kvm03] at time 11:05:22.633865 duration_in_ms=5.805
2018-10-03 11:05:22,634 [salt.state       :1770][INFO    ][3251] Running state [kvm03.mcp-ovs-dpdk-ha.local] at time 11:05:22.634293
2018-10-03 11:05:22,634 [salt.state       :1803][INFO    ][3251] Executing state host.present for [kvm03.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,656 [salt.state       :290 ][INFO    ][3251] {'host': 'kvm03.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,656 [salt.state       :1941][INFO    ][3251] Completed state [kvm03.mcp-ovs-dpdk-ha.local] at time 11:05:22.656476 duration_in_ms=22.182
2018-10-03 11:05:22,657 [salt.state       :1770][INFO    ][3251] Running state [kvm02] at time 11:05:22.657099
2018-10-03 11:05:22,657 [salt.state       :1803][INFO    ][3251] Executing state host.present for [kvm02]
2018-10-03 11:05:22,660 [salt.state       :290 ][INFO    ][3251] {'host': 'kvm02'}
2018-10-03 11:05:22,661 [salt.state       :1941][INFO    ][3251] Completed state [kvm02] at time 11:05:22.661234 duration_in_ms=4.135
2018-10-03 11:05:22,661 [salt.state       :1770][INFO    ][3251] Running state [kvm02.mcp-ovs-dpdk-ha.local] at time 11:05:22.661894
2018-10-03 11:05:22,662 [salt.state       :1803][INFO    ][3251] Executing state host.present for [kvm02.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,666 [salt.state       :290 ][INFO    ][3251] {'host': 'kvm02.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,667 [salt.state       :1941][INFO    ][3251] Completed state [kvm02.mcp-ovs-dpdk-ha.local] at time 11:05:22.667101 duration_in_ms=5.208
2018-10-03 11:05:22,667 [salt.state       :1770][INFO    ][3251] Running state [dbs] at time 11:05:22.667397
2018-10-03 11:05:22,667 [salt.state       :1803][INFO    ][3251] Executing state host.present for [dbs]
2018-10-03 11:05:22,672 [salt.state       :290 ][INFO    ][3251] {'host': 'dbs'}
2018-10-03 11:05:22,672 [salt.state       :1941][INFO    ][3251] Completed state [dbs] at time 11:05:22.672915 duration_in_ms=5.518
2018-10-03 11:05:22,673 [salt.state       :1770][INFO    ][3251] Running state [dbs.mcp-ovs-dpdk-ha.local] at time 11:05:22.673221
2018-10-03 11:05:22,673 [salt.state       :1803][INFO    ][3251] Executing state host.present for [dbs.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,678 [salt.state       :290 ][INFO    ][3251] {'host': 'dbs.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,679 [salt.state       :1941][INFO    ][3251] Completed state [dbs.mcp-ovs-dpdk-ha.local] at time 11:05:22.678981 duration_in_ms=5.76
2018-10-03 11:05:22,679 [salt.state       :1770][INFO    ][3251] Running state [prx] at time 11:05:22.679390
2018-10-03 11:05:22,679 [salt.state       :1803][INFO    ][3251] Executing state host.present for [prx]
2018-10-03 11:05:22,684 [salt.state       :290 ][INFO    ][3251] {'host': 'prx'}
2018-10-03 11:05:22,685 [salt.state       :1941][INFO    ][3251] Completed state [prx] at time 11:05:22.684995 duration_in_ms=5.605
2018-10-03 11:05:22,685 [salt.state       :1770][INFO    ][3251] Running state [prx.mcp-ovs-dpdk-ha.local] at time 11:05:22.685401
2018-10-03 11:05:22,685 [salt.state       :1803][INFO    ][3251] Executing state host.present for [prx.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,690 [salt.state       :290 ][INFO    ][3251] {'host': 'prx.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,691 [salt.state       :1941][INFO    ][3251] Completed state [prx.mcp-ovs-dpdk-ha.local] at time 11:05:22.691136 duration_in_ms=5.735
2018-10-03 11:05:22,691 [salt.state       :1770][INFO    ][3251] Running state [prx02] at time 11:05:22.691717
2018-10-03 11:05:22,692 [salt.state       :1803][INFO    ][3251] Executing state host.present for [prx02]
2018-10-03 11:05:22,696 [salt.state       :290 ][INFO    ][3251] {'host': 'prx02'}
2018-10-03 11:05:22,697 [salt.state       :1941][INFO    ][3251] Completed state [prx02] at time 11:05:22.697129 duration_in_ms=5.412
2018-10-03 11:05:22,697 [salt.state       :1770][INFO    ][3251] Running state [prx02.mcp-ovs-dpdk-ha.local] at time 11:05:22.697734
2018-10-03 11:05:22,698 [salt.state       :1803][INFO    ][3251] Executing state host.present for [prx02.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,702 [salt.state       :290 ][INFO    ][3251] {'host': 'prx02.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,703 [salt.state       :1941][INFO    ][3251] Completed state [prx02.mcp-ovs-dpdk-ha.local] at time 11:05:22.703048 duration_in_ms=5.313
2018-10-03 11:05:22,703 [salt.state       :1770][INFO    ][3251] Running state [msg02] at time 11:05:22.703443
2018-10-03 11:05:22,703 [salt.state       :1803][INFO    ][3251] Executing state host.present for [msg02]
2018-10-03 11:05:22,757 [salt.state       :290 ][INFO    ][3251] {'host': 'msg02'}
2018-10-03 11:05:22,757 [salt.state       :1941][INFO    ][3251] Completed state [msg02] at time 11:05:22.757371 duration_in_ms=53.928
2018-10-03 11:05:22,757 [salt.state       :1770][INFO    ][3251] Running state [msg02.mcp-ovs-dpdk-ha.local] at time 11:05:22.757904
2018-10-03 11:05:22,758 [salt.state       :1803][INFO    ][3251] Executing state host.present for [msg02.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,762 [salt.state       :290 ][INFO    ][3251] {'host': 'msg02.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,762 [salt.state       :1941][INFO    ][3251] Completed state [msg02.mcp-ovs-dpdk-ha.local] at time 11:05:22.762875 duration_in_ms=4.972
2018-10-03 11:05:22,763 [salt.state       :1770][INFO    ][3251] Running state [msg03] at time 11:05:22.763361
2018-10-03 11:05:22,763 [salt.state       :1803][INFO    ][3251] Executing state host.present for [msg03]
2018-10-03 11:05:22,768 [salt.state       :290 ][INFO    ][3251] {'host': 'msg03'}
2018-10-03 11:05:22,769 [salt.state       :1941][INFO    ][3251] Completed state [msg03] at time 11:05:22.768950 duration_in_ms=5.59
2018-10-03 11:05:22,769 [salt.state       :1770][INFO    ][3251] Running state [msg03.mcp-ovs-dpdk-ha.local] at time 11:05:22.769322
2018-10-03 11:05:22,769 [salt.state       :1803][INFO    ][3251] Executing state host.present for [msg03.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,774 [salt.state       :290 ][INFO    ][3251] {'host': 'msg03.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,775 [salt.state       :1941][INFO    ][3251] Completed state [msg03.mcp-ovs-dpdk-ha.local] at time 11:05:22.774977 duration_in_ms=5.655
2018-10-03 11:05:22,775 [salt.state       :1770][INFO    ][3251] Running state [msg01] at time 11:05:22.775356
2018-10-03 11:05:22,775 [salt.state       :1803][INFO    ][3251] Executing state host.present for [msg01]
2018-10-03 11:05:22,780 [salt.state       :290 ][INFO    ][3251] {'host': 'msg01'}
2018-10-03 11:05:22,781 [salt.state       :1941][INFO    ][3251] Completed state [msg01] at time 11:05:22.781016 duration_in_ms=5.659
2018-10-03 11:05:22,781 [salt.state       :1770][INFO    ][3251] Running state [msg01.mcp-ovs-dpdk-ha.local] at time 11:05:22.781478
2018-10-03 11:05:22,781 [salt.state       :1803][INFO    ][3251] Executing state host.present for [msg01.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,786 [salt.state       :290 ][INFO    ][3251] {'host': 'msg01.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,787 [salt.state       :1941][INFO    ][3251] Completed state [msg01.mcp-ovs-dpdk-ha.local] at time 11:05:22.787057 duration_in_ms=5.58
2018-10-03 11:05:22,787 [salt.state       :1770][INFO    ][3251] Running state [msg] at time 11:05:22.787521
2018-10-03 11:05:22,787 [salt.state       :1803][INFO    ][3251] Executing state host.present for [msg]
2018-10-03 11:05:22,792 [salt.state       :290 ][INFO    ][3251] {'host': 'msg'}
2018-10-03 11:05:22,793 [salt.state       :1941][INFO    ][3251] Completed state [msg] at time 11:05:22.792975 duration_in_ms=5.455
2018-10-03 11:05:22,793 [salt.state       :1770][INFO    ][3251] Running state [msg.mcp-ovs-dpdk-ha.local] at time 11:05:22.793400
2018-10-03 11:05:22,793 [salt.state       :1803][INFO    ][3251] Executing state host.present for [msg.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,865 [salt.state       :290 ][INFO    ][3251] {'host': 'msg.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,866 [salt.state       :1941][INFO    ][3251] Completed state [msg.mcp-ovs-dpdk-ha.local] at time 11:05:22.866237 duration_in_ms=72.836
2018-10-03 11:05:22,866 [salt.state       :1770][INFO    ][3251] Running state [cfg01] at time 11:05:22.866851
2018-10-03 11:05:22,867 [salt.state       :1803][INFO    ][3251] Executing state host.present for [cfg01]
2018-10-03 11:05:22,868 [salt.state       :290 ][INFO    ][3251] Host cfg01 (10.167.4.11) already present
2018-10-03 11:05:22,868 [salt.state       :1941][INFO    ][3251] Completed state [cfg01] at time 11:05:22.868364 duration_in_ms=1.513
2018-10-03 11:05:22,869 [salt.state       :1770][INFO    ][3251] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 11:05:22.868962
2018-10-03 11:05:22,869 [salt.state       :1803][INFO    ][3251] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,870 [salt.state       :290 ][INFO    ][3251] Host cfg01.mcp-ovs-dpdk-ha.local (10.167.4.11) already present
2018-10-03 11:05:22,870 [salt.state       :1941][INFO    ][3251] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 11:05:22.870344 duration_in_ms=1.383
2018-10-03 11:05:22,870 [salt.state       :1770][INFO    ][3251] Running state [cmp002] at time 11:05:22.870832
2018-10-03 11:05:22,871 [salt.state       :1803][INFO    ][3251] Executing state host.present for [cmp002]
2018-10-03 11:05:22,873 [salt.state       :290 ][INFO    ][3251] {'host': 'cmp002'}
2018-10-03 11:05:22,873 [salt.state       :1941][INFO    ][3251] Completed state [cmp002] at time 11:05:22.873695 duration_in_ms=2.863
2018-10-03 11:05:22,874 [salt.state       :1770][INFO    ][3251] Running state [cmp002.mcp-ovs-dpdk-ha.local] at time 11:05:22.874200
2018-10-03 11:05:22,874 [salt.state       :1803][INFO    ][3251] Executing state host.present for [cmp002.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,879 [salt.state       :290 ][INFO    ][3251] {'host': 'cmp002.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,879 [salt.state       :1941][INFO    ][3251] Completed state [cmp002.mcp-ovs-dpdk-ha.local] at time 11:05:22.879810 duration_in_ms=5.611
2018-10-03 11:05:22,880 [salt.state       :1770][INFO    ][3251] Running state [cmp001] at time 11:05:22.880365
2018-10-03 11:05:22,880 [salt.state       :1803][INFO    ][3251] Executing state host.present for [cmp001]
2018-10-03 11:05:22,885 [salt.state       :290 ][INFO    ][3251] {'host': 'cmp001'}
2018-10-03 11:05:22,885 [salt.state       :1941][INFO    ][3251] Completed state [cmp001] at time 11:05:22.885538 duration_in_ms=5.174
2018-10-03 11:05:22,885 [salt.state       :1770][INFO    ][3251] Running state [cmp001.mcp-ovs-dpdk-ha.local] at time 11:05:22.885830
2018-10-03 11:05:22,886 [salt.state       :1803][INFO    ][3251] Executing state host.present for [cmp001.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,891 [salt.state       :290 ][INFO    ][3251] {'host': 'cmp001.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,891 [salt.state       :1941][INFO    ][3251] Completed state [cmp001.mcp-ovs-dpdk-ha.local] at time 11:05:22.891548 duration_in_ms=5.717
2018-10-03 11:05:22,891 [salt.state       :1770][INFO    ][3251] Running state [dbs01] at time 11:05:22.891852
2018-10-03 11:05:22,892 [salt.state       :1803][INFO    ][3251] Executing state host.present for [dbs01]
2018-10-03 11:05:22,897 [salt.state       :290 ][INFO    ][3251] {'host': 'dbs01'}
2018-10-03 11:05:22,897 [salt.state       :1941][INFO    ][3251] Completed state [dbs01] at time 11:05:22.897656 duration_in_ms=5.804
2018-10-03 11:05:22,898 [salt.state       :1770][INFO    ][3251] Running state [dbs01.mcp-ovs-dpdk-ha.local] at time 11:05:22.898044
2018-10-03 11:05:22,898 [salt.state       :1803][INFO    ][3251] Executing state host.present for [dbs01.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,903 [salt.state       :290 ][INFO    ][3251] {'host': 'dbs01.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,903 [salt.state       :1941][INFO    ][3251] Completed state [dbs01.mcp-ovs-dpdk-ha.local] at time 11:05:22.903825 duration_in_ms=5.78
2018-10-03 11:05:22,904 [salt.state       :1770][INFO    ][3251] Running state [dbs02] at time 11:05:22.904378
2018-10-03 11:05:22,904 [salt.state       :1803][INFO    ][3251] Executing state host.present for [dbs02]
2018-10-03 11:05:22,909 [salt.state       :290 ][INFO    ][3251] {'host': 'dbs02'}
2018-10-03 11:05:22,909 [salt.state       :1941][INFO    ][3251] Completed state [dbs02] at time 11:05:22.909863 duration_in_ms=5.486
2018-10-03 11:05:22,910 [salt.state       :1770][INFO    ][3251] Running state [dbs02.mcp-ovs-dpdk-ha.local] at time 11:05:22.910432
2018-10-03 11:05:22,910 [salt.state       :1803][INFO    ][3251] Executing state host.present for [dbs02.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,915 [salt.state       :290 ][INFO    ][3251] {'host': 'dbs02.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,915 [salt.state       :1941][INFO    ][3251] Completed state [dbs02.mcp-ovs-dpdk-ha.local] at time 11:05:22.915774 duration_in_ms=5.341
2018-10-03 11:05:22,916 [salt.state       :1770][INFO    ][3251] Running state [dbs03] at time 11:05:22.916214
2018-10-03 11:05:22,916 [salt.state       :1803][INFO    ][3251] Executing state host.present for [dbs03]
2018-10-03 11:05:22,921 [salt.state       :290 ][INFO    ][3251] {'host': 'dbs03'}
2018-10-03 11:05:22,921 [salt.state       :1941][INFO    ][3251] Completed state [dbs03] at time 11:05:22.921874 duration_in_ms=5.661
2018-10-03 11:05:22,922 [salt.state       :1770][INFO    ][3251] Running state [dbs03.mcp-ovs-dpdk-ha.local] at time 11:05:22.922258
2018-10-03 11:05:22,922 [salt.state       :1803][INFO    ][3251] Executing state host.present for [dbs03.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,927 [salt.state       :290 ][INFO    ][3251] {'host': 'dbs03.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,927 [salt.state       :1941][INFO    ][3251] Completed state [dbs03.mcp-ovs-dpdk-ha.local] at time 11:05:22.927737 duration_in_ms=5.479
2018-10-03 11:05:22,928 [salt.state       :1770][INFO    ][3251] Running state [mas01] at time 11:05:22.928217
2018-10-03 11:05:22,928 [salt.state       :1803][INFO    ][3251] Executing state host.present for [mas01]
2018-10-03 11:05:22,933 [salt.state       :290 ][INFO    ][3251] {'host': 'mas01'}
2018-10-03 11:05:22,933 [salt.state       :1941][INFO    ][3251] Completed state [mas01] at time 11:05:22.933805 duration_in_ms=5.588
2018-10-03 11:05:22,934 [salt.state       :1770][INFO    ][3251] Running state [mas01.mcp-ovs-dpdk-ha.local] at time 11:05:22.934245
2018-10-03 11:05:22,934 [salt.state       :1803][INFO    ][3251] Executing state host.present for [mas01.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:22,939 [salt.state       :290 ][INFO    ][3251] {'host': 'mas01.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:22,939 [salt.state       :1941][INFO    ][3251] Completed state [mas01.mcp-ovs-dpdk-ha.local] at time 11:05:22.939768 duration_in_ms=5.522
2018-10-03 11:05:22,940 [salt.state       :1770][INFO    ][3251] Running state [ctl02] at time 11:05:22.940245
2018-10-03 11:05:22,940 [salt.state       :1803][INFO    ][3251] Executing state host.present for [ctl02]
2018-10-03 11:05:22,945 [salt.state       :290 ][INFO    ][3251] {'host': 'ctl02'}
2018-10-03 11:05:22,945 [salt.state       :1941][INFO    ][3251] Completed state [ctl02] at time 11:05:22.945901 duration_in_ms=5.656
2018-10-03 11:05:22,946 [salt.state       :1770][INFO    ][3251] Running state [ctl02.mcp-ovs-dpdk-ha.local] at time 11:05:22.946350
2018-10-03 11:05:22,946 [salt.state       :1803][INFO    ][3251] Executing state host.present for [ctl02.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:23,095 [salt.state       :290 ][INFO    ][3251] {'host': 'ctl02.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:23,096 [salt.state       :1941][INFO    ][3251] Completed state [ctl02.mcp-ovs-dpdk-ha.local] at time 11:05:23.096050 duration_in_ms=149.698
2018-10-03 11:05:23,096 [salt.state       :1770][INFO    ][3251] Running state [ctl03] at time 11:05:23.096771
2018-10-03 11:05:23,097 [salt.state       :1803][INFO    ][3251] Executing state host.present for [ctl03]
2018-10-03 11:05:23,101 [salt.state       :290 ][INFO    ][3251] {'host': 'ctl03'}
2018-10-03 11:05:23,101 [salt.state       :1941][INFO    ][3251] Completed state [ctl03] at time 11:05:23.101478 duration_in_ms=4.706
2018-10-03 11:05:23,102 [salt.state       :1770][INFO    ][3251] Running state [ctl03.mcp-ovs-dpdk-ha.local] at time 11:05:23.102095
2018-10-03 11:05:23,102 [salt.state       :1803][INFO    ][3251] Executing state host.present for [ctl03.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:23,165 [salt.state       :290 ][INFO    ][3251] {'host': 'ctl03.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:23,165 [salt.state       :1941][INFO    ][3251] Completed state [ctl03.mcp-ovs-dpdk-ha.local] at time 11:05:23.165575 duration_in_ms=63.48
2018-10-03 11:05:23,166 [salt.state       :1770][INFO    ][3251] Running state [ctl01] at time 11:05:23.166185
2018-10-03 11:05:23,166 [salt.state       :1803][INFO    ][3251] Executing state host.present for [ctl01]
2018-10-03 11:05:23,171 [salt.state       :290 ][INFO    ][3251] {'host': 'ctl01'}
2018-10-03 11:05:23,171 [salt.state       :1941][INFO    ][3251] Completed state [ctl01] at time 11:05:23.171523 duration_in_ms=5.338
2018-10-03 11:05:23,172 [salt.state       :1770][INFO    ][3251] Running state [ctl01.mcp-ovs-dpdk-ha.local] at time 11:05:23.172080
2018-10-03 11:05:23,172 [salt.state       :1803][INFO    ][3251] Executing state host.present for [ctl01.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:23,177 [salt.state       :290 ][INFO    ][3251] {'host': 'ctl01.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:23,177 [salt.state       :1941][INFO    ][3251] Completed state [ctl01.mcp-ovs-dpdk-ha.local] at time 11:05:23.177294 duration_in_ms=5.215
2018-10-03 11:05:23,177 [salt.state       :1770][INFO    ][3251] Running state [ctl] at time 11:05:23.177648
2018-10-03 11:05:23,177 [salt.state       :1803][INFO    ][3251] Executing state host.present for [ctl]
2018-10-03 11:05:23,183 [salt.state       :290 ][INFO    ][3251] {'host': 'ctl'}
2018-10-03 11:05:23,183 [salt.state       :1941][INFO    ][3251] Completed state [ctl] at time 11:05:23.183358 duration_in_ms=5.71
2018-10-03 11:05:23,183 [salt.state       :1770][INFO    ][3251] Running state [ctl.mcp-ovs-dpdk-ha.local] at time 11:05:23.183713
2018-10-03 11:05:23,183 [salt.state       :1803][INFO    ][3251] Executing state host.present for [ctl.mcp-ovs-dpdk-ha.local]
2018-10-03 11:05:23,189 [salt.state       :290 ][INFO    ][3251] {'host': 'ctl.mcp-ovs-dpdk-ha.local'}
2018-10-03 11:05:23,189 [salt.state       :1941][INFO    ][3251] Completed state [ctl.mcp-ovs-dpdk-ha.local] at time 11:05:23.189556 duration_in_ms=5.843
2018-10-03 11:05:23,189 [salt.state       :1770][INFO    ][3251] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 11:05:23.189860
2018-10-03 11:05:23,190 [salt.state       :1803][INFO    ][3251] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-10-03 11:05:23,190 [salt.state       :290 ][INFO    ][3251] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-10-03 11:05:23,190 [salt.state       :1941][INFO    ][3251] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 11:05:23.190888 duration_in_ms=1.028
2018-10-03 11:05:23,192 [salt.state       :1770][INFO    ][3251] Running state [ens3] at time 11:05:23.192758
2018-10-03 11:05:23,193 [salt.state       :1803][INFO    ][3251] Executing state network.managed for [ens3]
2018-10-03 11:05:23,381 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['ifup', 'ens3'] in directory '/root'
2018-10-03 11:05:24,129 [salt.state       :290 ][INFO    ][3251] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-10-03 11:05:24,335 [salt.state       :1941][INFO    ][3251] Completed state [ens3] at time 11:05:24.335325 duration_in_ms=1142.567
2018-10-03 11:05:24,335 [salt.state       :1770][INFO    ][3251] Running state [ens2] at time 11:05:24.335790
2018-10-03 11:05:24,336 [salt.state       :1803][INFO    ][3251] Executing state network.managed for [ens2]
2018-10-03 11:05:24,361 [salt.state       :290 ][INFO    ][3251] {'interface': 'Added network interface.'}
2018-10-03 11:05:24,361 [salt.state       :1941][INFO    ][3251] Completed state [ens2] at time 11:05:24.361738 duration_in_ms=25.948
2018-10-03 11:05:24,362 [salt.state       :1770][INFO    ][3251] Running state [linux_system_network] at time 11:05:24.362084
2018-10-03 11:05:24,362 [salt.state       :1803][INFO    ][3251] Executing state network.system for [linux_system_network]
2018-10-03 11:05:24,363 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-10-03 11:05:24,378 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-10-03 11:05:24,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-10-03 11:05:24,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-10-03 11:05:25,045 [salt.loaded.int.module.debian_ip:1970][WARNING ][3251] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-10-03 11:05:25,046 [salt.state       :290 ][INFO    ][3251] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb01\n\n+DOMAIN=mcp-ovs-dpdk-ha.local\n\n+SEARCH=maas\n'}
2018-10-03 11:05:25,046 [salt.state       :1941][INFO    ][3251] Completed state [linux_system_network] at time 11:05:25.046743 duration_in_ms=684.658
2018-10-03 11:05:25,047 [salt.state       :1770][INFO    ][3251] Running state [/etc/profile.d/proxy.sh] at time 11:05:25.047156
2018-10-03 11:05:25,047 [salt.state       :1803][INFO    ][3251] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-10-03 11:05:25,048 [salt.state       :290 ][INFO    ][3251] File /etc/profile.d/proxy.sh is not present
2018-10-03 11:05:25,048 [salt.state       :1941][INFO    ][3251] Completed state [/etc/profile.d/proxy.sh] at time 11:05:25.048308 duration_in_ms=1.152
2018-10-03 11:05:25,048 [salt.state       :1770][INFO    ][3251] Running state [/etc/apt/apt.conf.d/95proxies] at time 11:05:25.048550
2018-10-03 11:05:25,048 [salt.state       :1803][INFO    ][3251] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-10-03 11:05:25,049 [salt.state       :290 ][INFO    ][3251] File /etc/apt/apt.conf.d/95proxies is not present
2018-10-03 11:05:25,049 [salt.state       :1941][INFO    ][3251] Completed state [/etc/apt/apt.conf.d/95proxies] at time 11:05:25.049394 duration_in_ms=0.843
2018-10-03 11:05:25,051 [salt.state       :1770][INFO    ][3251] Running state [ntp] at time 11:05:25.051396
2018-10-03 11:05:25,051 [salt.state       :1803][INFO    ][3251] Executing state pkg.installed for [ntp]
2018-10-03 11:05:25,236 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 11:05:25,264 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-10-03 11:05:29,775 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110529759261
2018-10-03 11:05:29,799 [salt.minion      :1431][INFO    ][5895] Starting a new job with PID 5895
2018-10-03 11:05:29,813 [salt.minion      :1708][INFO    ][5895] Returning information for job: 20181003110529759261
2018-10-03 11:05:39,801 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110539786139
2018-10-03 11:05:39,828 [salt.minion      :1431][INFO    ][6466] Starting a new job with PID 6466
2018-10-03 11:05:39,856 [salt.minion      :1708][INFO    ][6466] Returning information for job: 20181003110539786139
2018-10-03 11:05:44,192 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:05:44,228 [salt.state       :290 ][INFO    ][3251] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-10-03 11:05:44,241 [salt.state       :905 ][INFO    ][3251] Loading fresh modules for state activity
2018-10-03 11:05:44,265 [salt.state       :1941][INFO    ][3251] Completed state [ntp] at time 11:05:44.265670 duration_in_ms=19214.273
2018-10-03 11:05:44,269 [salt.state       :1770][INFO    ][3251] Running state [/etc/ntp.conf] at time 11:05:44.269255
2018-10-03 11:05:44,269 [salt.state       :1803][INFO    ][3251] Executing state file.managed for [/etc/ntp.conf]
2018-10-03 11:05:44,288 [salt.fileclient  :1215][INFO    ][3251] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-10-03 11:05:44,338 [salt.state       :290 ][INFO    ][3251] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.pool.ntp.org iburst
+server 0.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-10-03 11:05:44,339 [salt.state       :1941][INFO    ][3251] Completed state [/etc/ntp.conf] at time 11:05:44.339130 duration_in_ms=69.875
2018-10-03 11:05:44,674 [salt.state       :1770][INFO    ][3251] Running state [ntp] at time 11:05:44.674466
2018-10-03 11:05:44,675 [salt.state       :1803][INFO    ][3251] Executing state service.running for [ntp]
2018-10-03 11:05:44,675 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-10-03 11:05:44,689 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-03 11:05:44,700 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-10-03 11:05:44,717 [salt.state       :290 ][INFO    ][3251] The service ntp is already running
2018-10-03 11:05:44,717 [salt.state       :1941][INFO    ][3251] Completed state [ntp] at time 11:05:44.717743 duration_in_ms=43.277
2018-10-03 11:05:44,718 [salt.state       :1770][INFO    ][3251] Running state [ntp] at time 11:05:44.718037
2018-10-03 11:05:44,718 [salt.state       :1803][INFO    ][3251] Executing state service.mod_watch for [ntp]
2018-10-03 11:05:44,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-03 11:05:44,735 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3251] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-10-03 11:05:44,803 [salt.state       :290 ][INFO    ][3251] {'ntp': True}
2018-10-03 11:05:44,804 [salt.state       :1941][INFO    ][3251] Completed state [ntp] at time 11:05:44.804047 duration_in_ms=86.008
2018-10-03 11:05:44,810 [salt.minion      :1708][INFO    ][3251] Returning information for job: 20181003110423657006
2018-10-03 11:05:57,989 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181003110557974740
2018-10-03 11:05:58,011 [salt.minion      :1431][INFO    ][6760] Starting a new job with PID 6760
2018-10-03 11:05:58,031 [salt.minion      :1708][INFO    ][6760] Returning information for job: 20181003110557974740
2018-10-03 11:06:40,952 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command pkg.upgrade with jid 20181003110640938795
2018-10-03 11:06:40,975 [salt.minion      :1431][INFO    ][6765] Starting a new job with PID 6765
2018-10-03 11:06:41,002 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6765] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:06:41,508 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6765] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-10-03 11:06:46,059 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110646047094
2018-10-03 11:06:46,109 [salt.minion      :1431][INFO    ][6795] Starting a new job with PID 6795
2018-10-03 11:06:46,124 [salt.minion      :1708][INFO    ][6795] Returning information for job: 20181003110646047094
2018-10-03 11:06:56,147 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110656132286
2018-10-03 11:06:56,174 [salt.minion      :1431][INFO    ][6826] Starting a new job with PID 6826
2018-10-03 11:06:56,197 [salt.minion      :1708][INFO    ][6826] Returning information for job: 20181003110656132286
2018-10-03 11:07:06,180 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110706168539
2018-10-03 11:07:06,239 [salt.minion      :1431][INFO    ][6832] Starting a new job with PID 6832
2018-10-03 11:07:06,986 [salt.minion      :1708][INFO    ][6832] Returning information for job: 20181003110706168539
2018-10-03 11:07:16,300 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110716289074
2018-10-03 11:07:16,322 [salt.minion      :1431][INFO    ][6881] Starting a new job with PID 6881
2018-10-03 11:07:16,340 [salt.minion      :1708][INFO    ][6881] Returning information for job: 20181003110716289074
2018-10-03 11:07:26,459 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110726447356
2018-10-03 11:07:26,484 [salt.minion      :1431][INFO    ][6914] Starting a new job with PID 6914
2018-10-03 11:07:26,509 [salt.minion      :1708][INFO    ][6914] Returning information for job: 20181003110726447356
2018-10-03 11:07:36,539 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110736527305
2018-10-03 11:07:36,559 [salt.minion      :1431][INFO    ][6940] Starting a new job with PID 6940
2018-10-03 11:07:36,576 [salt.minion      :1708][INFO    ][6940] Returning information for job: 20181003110736527305
2018-10-03 11:07:46,697 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110746687059
2018-10-03 11:07:46,722 [salt.minion      :1431][INFO    ][6945] Starting a new job with PID 6945
2018-10-03 11:07:46,740 [salt.minion      :1708][INFO    ][6945] Returning information for job: 20181003110746687059
2018-10-03 11:07:56,763 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110756750872
2018-10-03 11:07:56,788 [salt.minion      :1431][INFO    ][6975] Starting a new job with PID 6975
2018-10-03 11:07:56,819 [salt.minion      :1708][INFO    ][6975] Returning information for job: 20181003110756750872
2018-10-03 11:08:06,932 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110806922881
2018-10-03 11:08:06,951 [salt.minion      :1431][INFO    ][6983] Starting a new job with PID 6983
2018-10-03 11:08:07,429 [salt.minion      :1708][INFO    ][6983] Returning information for job: 20181003110806922881
2018-10-03 11:08:16,962 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110816952041
2018-10-03 11:08:16,986 [salt.minion      :1431][INFO    ][6988] Starting a new job with PID 6988
2018-10-03 11:08:17,335 [salt.minion      :1708][INFO    ][6988] Returning information for job: 20181003110816952041
2018-10-03 11:08:27,082 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110827073072
2018-10-03 11:08:27,104 [salt.minion      :1431][INFO    ][6993] Starting a new job with PID 6993
2018-10-03 11:08:27,338 [salt.minion      :1708][INFO    ][6993] Returning information for job: 20181003110827073072
2018-10-03 11:08:37,261 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110837251490
2018-10-03 11:08:37,280 [salt.minion      :1431][INFO    ][7125] Starting a new job with PID 7125
2018-10-03 11:08:37,299 [salt.minion      :1708][INFO    ][7125] Returning information for job: 20181003110837251490
2018-10-03 11:08:47,337 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110847326239
2018-10-03 11:08:47,361 [salt.minion      :1431][INFO    ][7133] Starting a new job with PID 7133
2018-10-03 11:08:47,383 [salt.minion      :1708][INFO    ][7133] Returning information for job: 20181003110847326239
2018-10-03 11:08:57,528 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110857512133
2018-10-03 11:08:57,554 [salt.minion      :1431][INFO    ][7138] Starting a new job with PID 7138
2018-10-03 11:08:58,386 [salt.minion      :1708][INFO    ][7138] Returning information for job: 20181003110857512133
2018-10-03 11:09:07,616 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110907598851
2018-10-03 11:09:07,641 [salt.minion      :1431][INFO    ][7143] Starting a new job with PID 7143
2018-10-03 11:09:07,658 [salt.minion      :1708][INFO    ][7143] Returning information for job: 20181003110907598851
2018-10-03 11:09:17,835 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110917818303
2018-10-03 11:09:17,858 [salt.minion      :1431][INFO    ][7148] Starting a new job with PID 7148
2018-10-03 11:09:17,873 [salt.minion      :1708][INFO    ][7148] Returning information for job: 20181003110917818303
2018-10-03 11:09:28,046 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110928029059
2018-10-03 11:09:28,067 [salt.minion      :1431][INFO    ][7153] Starting a new job with PID 7153
2018-10-03 11:09:28,084 [salt.minion      :1708][INFO    ][7153] Returning information for job: 20181003110928029059
2018-10-03 11:09:38,247 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110938230252
2018-10-03 11:09:38,267 [salt.minion      :1431][INFO    ][7158] Starting a new job with PID 7158
2018-10-03 11:09:38,283 [salt.minion      :1708][INFO    ][7158] Returning information for job: 20181003110938230252
2018-10-03 11:09:48,391 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110948372027
2018-10-03 11:09:48,407 [salt.minion      :1431][INFO    ][7190] Starting a new job with PID 7190
2018-10-03 11:09:48,423 [salt.minion      :1708][INFO    ][7190] Returning information for job: 20181003110948372027
2018-10-03 11:09:58,546 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003110958528409
2018-10-03 11:09:58,574 [salt.minion      :1431][INFO    ][7195] Starting a new job with PID 7195
2018-10-03 11:09:58,591 [salt.minion      :1708][INFO    ][7195] Returning information for job: 20181003110958528409
2018-10-03 11:10:08,696 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111008675334
2018-10-03 11:10:08,721 [salt.minion      :1431][INFO    ][7200] Starting a new job with PID 7200
2018-10-03 11:10:08,736 [salt.minion      :1708][INFO    ][7200] Returning information for job: 20181003111008675334
2018-10-03 11:10:18,741 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111018724118
2018-10-03 11:10:18,770 [salt.minion      :1431][INFO    ][7205] Starting a new job with PID 7205
2018-10-03 11:10:18,786 [salt.minion      :1708][INFO    ][7205] Returning information for job: 20181003111018724118
2018-10-03 11:10:28,859 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111028841930
2018-10-03 11:10:28,882 [salt.minion      :1431][INFO    ][7210] Starting a new job with PID 7210
2018-10-03 11:10:28,904 [salt.minion      :1708][INFO    ][7210] Returning information for job: 20181003111028841930
2018-10-03 11:10:39,056 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111039037683
2018-10-03 11:10:39,079 [salt.minion      :1431][INFO    ][7215] Starting a new job with PID 7215
2018-10-03 11:10:39,094 [salt.minion      :1708][INFO    ][7215] Returning information for job: 20181003111039037683
2018-10-03 11:10:49,072 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111049056697
2018-10-03 11:10:49,089 [salt.minion      :1431][INFO    ][7226] Starting a new job with PID 7226
2018-10-03 11:10:49,105 [salt.minion      :1708][INFO    ][7226] Returning information for job: 20181003111049056697
2018-10-03 11:10:59,258 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111059240007
2018-10-03 11:10:59,283 [salt.minion      :1431][INFO    ][7252] Starting a new job with PID 7252
2018-10-03 11:10:59,299 [salt.minion      :1708][INFO    ][7252] Returning information for job: 20181003111059240007
2018-10-03 11:11:09,398 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111109380440
2018-10-03 11:11:09,421 [salt.minion      :1431][INFO    ][7257] Starting a new job with PID 7257
2018-10-03 11:11:09,436 [salt.minion      :1708][INFO    ][7257] Returning information for job: 20181003111109380440
2018-10-03 11:11:19,425 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111119408461
2018-10-03 11:11:19,443 [salt.minion      :1431][INFO    ][7304] Starting a new job with PID 7304
2018-10-03 11:11:19,458 [salt.minion      :1708][INFO    ][7304] Returning information for job: 20181003111119408461
2018-10-03 11:11:29,456 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111129438573
2018-10-03 11:11:29,482 [salt.minion      :1431][INFO    ][7339] Starting a new job with PID 7339
2018-10-03 11:11:29,497 [salt.minion      :1708][INFO    ][7339] Returning information for job: 20181003111129438573
2018-10-03 11:11:39,649 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111139631890
2018-10-03 11:11:39,675 [salt.minion      :1431][INFO    ][7404] Starting a new job with PID 7404
2018-10-03 11:11:39,838 [salt.minion      :1708][INFO    ][7404] Returning information for job: 20181003111139631890
2018-10-03 11:11:49,845 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111149828038
2018-10-03 11:11:49,869 [salt.minion      :1431][INFO    ][7473] Starting a new job with PID 7473
2018-10-03 11:11:49,884 [salt.minion      :1708][INFO    ][7473] Returning information for job: 20181003111149828038
2018-10-03 11:11:59,893 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111159875560
2018-10-03 11:11:59,917 [salt.minion      :1431][INFO    ][7537] Starting a new job with PID 7537
2018-10-03 11:11:59,933 [salt.minion      :1708][INFO    ][7537] Returning information for job: 20181003111159875560
2018-10-03 11:12:10,051 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111210033324
2018-10-03 11:12:10,073 [salt.minion      :1431][INFO    ][7602] Starting a new job with PID 7602
2018-10-03 11:12:10,090 [salt.minion      :1708][INFO    ][7602] Returning information for job: 20181003111210033324
2018-10-03 11:12:20,244 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111220226575
2018-10-03 11:12:20,273 [salt.minion      :1431][INFO    ][7666] Starting a new job with PID 7666
2018-10-03 11:12:20,288 [salt.minion      :1708][INFO    ][7666] Returning information for job: 20181003111220226575
2018-10-03 11:12:30,272 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111230253912
2018-10-03 11:12:30,293 [salt.minion      :1431][INFO    ][8132] Starting a new job with PID 8132
2018-10-03 11:12:30,324 [salt.minion      :1708][INFO    ][8132] Returning information for job: 20181003111230253912
2018-10-03 11:12:40,364 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111240347429
2018-10-03 11:12:40,383 [salt.minion      :1431][INFO    ][8182] Starting a new job with PID 8182
2018-10-03 11:12:40,402 [salt.minion      :1708][INFO    ][8182] Returning information for job: 20181003111240347429
2018-10-03 11:12:50,493 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111250476279
2018-10-03 11:12:50,511 [salt.minion      :1431][INFO    ][8925] Starting a new job with PID 8925
2018-10-03 11:12:50,526 [salt.minion      :1708][INFO    ][8925] Returning information for job: 20181003111250476279
2018-10-03 11:13:00,534 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111300517091
2018-10-03 11:13:00,566 [salt.minion      :1431][INFO    ][12127] Starting a new job with PID 12127
2018-10-03 11:13:00,583 [salt.minion      :1708][INFO    ][12127] Returning information for job: 20181003111300517091
2018-10-03 11:13:10,556 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111310539973
2018-10-03 11:13:10,573 [salt.minion      :1431][INFO    ][14080] Starting a new job with PID 14080
2018-10-03 11:13:10,705 [salt.minion      :1708][INFO    ][14080] Returning information for job: 20181003111310539973
2018-10-03 11:13:20,648 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111320631965
2018-10-03 11:13:20,675 [salt.minion      :1431][INFO    ][14219] Starting a new job with PID 14219
2018-10-03 11:13:20,690 [salt.minion      :1708][INFO    ][14219] Returning information for job: 20181003111320631965
2018-10-03 11:13:30,792 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111330776287
2018-10-03 11:13:30,815 [salt.minion      :1431][INFO    ][15617] Starting a new job with PID 15617
2018-10-03 11:13:30,831 [salt.minion      :1708][INFO    ][15617] Returning information for job: 20181003111330776287
2018-10-03 11:13:40,958 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111340942008
2018-10-03 11:13:40,984 [salt.minion      :1431][INFO    ][18914] Starting a new job with PID 18914
2018-10-03 11:13:41,000 [salt.minion      :1708][INFO    ][18914] Returning information for job: 20181003111340942008
2018-10-03 11:13:51,132 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111351115711
2018-10-03 11:13:51,155 [salt.minion      :1431][INFO    ][21200] Starting a new job with PID 21200
2018-10-03 11:13:51,170 [salt.minion      :1708][INFO    ][21200] Returning information for job: 20181003111351115711
2018-10-03 11:14:01,162 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111401147047
2018-10-03 11:14:01,182 [salt.minion      :1431][INFO    ][23108] Starting a new job with PID 23108
2018-10-03 11:14:01,202 [salt.minion      :1708][INFO    ][23108] Returning information for job: 20181003111401147047
2018-10-03 11:14:04,414 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6765] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:14:04,452 [salt.minion      :1708][INFO    ][6765] Returning information for job: 20181003110640938795
2018-10-03 11:15:17,305 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command test.ping with jid 20181003111517294852
2018-10-03 11:15:17,324 [salt.minion      :1431][INFO    ][23868] Starting a new job with PID 23868
2018-10-03 11:15:17,350 [salt.minion      :1708][INFO    ][23868] Returning information for job: 20181003111517294852
2018-10-03 11:17:50,016 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command state.sls with jid 20181003111750006591
2018-10-03 11:17:50,038 [salt.minion      :1431][INFO    ][23892] Starting a new job with PID 23892
2018-10-03 11:17:54,059 [salt.state       :905 ][INFO    ][23892] Loading fresh modules for state activity
2018-10-03 11:17:54,101 [salt.fileclient  :1215][INFO    ][23892] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-10-03 11:17:54,129 [salt.fileclient  :1215][INFO    ][23892] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-10-03 11:17:54,700 [salt.state       :1770][INFO    ][23892] Running state [keepalived] at time 11:17:54.700940
2018-10-03 11:17:54,701 [salt.state       :1803][INFO    ][23892] Executing state pkg.installed for [keepalived]
2018-10-03 11:17:54,702 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:17:55,077 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-10-03 11:17:55,079 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111755067692
2018-10-03 11:17:55,116 [salt.minion      :1431][INFO    ][23909] Starting a new job with PID 23909
2018-10-03 11:17:55,136 [salt.minion      :1708][INFO    ][23909] Returning information for job: 20181003111755067692
2018-10-03 11:17:55,218 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 11:17:56,994 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 11:17:57,023 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-10-03 11:18:05,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:18:05,061 [salt.state       :290 ][INFO    ][23892] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-10-03 11:18:05,075 [salt.state       :905 ][INFO    ][23892] Loading fresh modules for state activity
2018-10-03 11:18:05,098 [salt.state       :1941][INFO    ][23892] Completed state [keepalived] at time 11:18:05.098073 duration_in_ms=10397.133
2018-10-03 11:18:05,101 [salt.state       :1770][INFO    ][23892] Running state [lsof] at time 11:18:05.101947
2018-10-03 11:18:05,102 [salt.state       :1803][INFO    ][23892] Executing state pkg.installed for [lsof]
2018-10-03 11:18:05,518 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003111805237076
2018-10-03 11:18:05,534 [salt.minion      :1431][INFO    ][25203] Starting a new job with PID 25203
2018-10-03 11:18:05,546 [salt.minion      :1708][INFO    ][25203] Returning information for job: 20181003111805237076
2018-10-03 11:18:05,546 [salt.state       :290 ][INFO    ][23892] All specified packages are already installed
2018-10-03 11:18:05,547 [salt.state       :1941][INFO    ][23892] Completed state [lsof] at time 11:18:05.547387 duration_in_ms=445.439
2018-10-03 11:18:05,549 [salt.state       :1770][INFO    ][23892] Running state [/etc/keepalived/keepalived.conf] at time 11:18:05.549868
2018-10-03 11:18:05,550 [salt.state       :1803][INFO    ][23892] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-03 11:18:05,572 [salt.fileclient  :1215][INFO    ][23892] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-10-03 11:18:05,606 [salt.state       :290 ][INFO    ][23892] File changed:
New file
2018-10-03 11:18:05,606 [salt.state       :1941][INFO    ][23892] Completed state [/etc/keepalived/keepalived.conf] at time 11:18:05.606831 duration_in_ms=56.962
2018-10-03 11:18:05,607 [salt.state       :1770][INFO    ][23892] Running state [keepalived] at time 11:18:05.607712
2018-10-03 11:18:05,608 [salt.state       :1803][INFO    ][23892] Executing state service.running for [keepalived]
2018-10-03 11:18:05,608 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-03 11:18:05,628 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-03 11:18:05,645 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-03 11:18:05,662 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-10-03 11:18:05,729 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-03 11:18:05,746 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-03 11:18:05,760 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23892] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-03 11:18:05,777 [salt.state       :290 ][INFO    ][23892] {'keepalived': True}
2018-10-03 11:18:05,778 [salt.state       :1941][INFO    ][23892] Completed state [keepalived] at time 11:18:05.778486 duration_in_ms=170.774
2018-10-03 11:18:05,779 [salt.minion      :1708][INFO    ][23892] Returning information for job: 20181003111750006591
2018-10-03 11:19:37,452 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command pillar.get with jid 20181003111937451006
2018-10-03 11:19:37,480 [salt.minion      :1431][INFO    ][25266] Starting a new job with PID 25266
2018-10-03 11:19:37,487 [salt.minion      :1708][INFO    ][25266] Returning information for job: 20181003111937451006
2018-10-03 11:32:35,819 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command state.sls with jid 20181003113235818897
2018-10-03 11:32:35,840 [salt.minion      :1431][INFO    ][25301] Starting a new job with PID 25301
2018-10-03 11:32:40,568 [salt.state       :905 ][INFO    ][25301] Loading fresh modules for state activity
2018-10-03 11:32:40,954 [salt.fileclient  :1215][INFO    ][25301] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-10-03 11:32:41,045 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003113241048357
2018-10-03 11:32:41,059 [salt.fileclient  :1215][INFO    ][25301] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-10-03 11:32:41,072 [salt.minion      :1431][INFO    ][25310] Starting a new job with PID 25310
2018-10-03 11:32:41,086 [salt.fileclient  :1215][INFO    ][25301] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-10-03 11:32:41,090 [salt.minion      :1708][INFO    ][25310] Returning information for job: 20181003113241048357
2018-10-03 11:32:41,665 [salt.state       :1770][INFO    ][25301] Running state [memcached] at time 11:32:41.665195
2018-10-03 11:32:41,665 [salt.state       :1803][INFO    ][25301] Executing state pkg.installed for [memcached]
2018-10-03 11:32:41,666 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:32:42,086 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-10-03 11:32:42,240 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 11:32:44,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 11:32:44,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-10-03 11:32:51,125 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:32:51,164 [salt.state       :290 ][INFO    ][25301] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-10-03 11:32:51,172 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003113251170553
2018-10-03 11:32:51,181 [salt.state       :905 ][INFO    ][25301] Loading fresh modules for state activity
2018-10-03 11:32:51,195 [salt.minion      :1431][INFO    ][26089] Starting a new job with PID 26089
2018-10-03 11:32:51,206 [salt.state       :1941][INFO    ][25301] Completed state [memcached] at time 11:32:51.206739 duration_in_ms=9541.545
2018-10-03 11:32:51,211 [salt.state       :1770][INFO    ][25301] Running state [python-memcache] at time 11:32:51.211276
2018-10-03 11:32:51,211 [salt.state       :1803][INFO    ][25301] Executing state pkg.installed for [python-memcache]
2018-10-03 11:32:51,214 [salt.minion      :1708][INFO    ][26089] Returning information for job: 20181003113251170553
2018-10-03 11:32:51,766 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 11:32:51,792 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-10-03 11:32:54,448 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:32:54,482 [salt.state       :290 ][INFO    ][25301] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-10-03 11:32:54,503 [salt.state       :905 ][INFO    ][25301] Loading fresh modules for state activity
2018-10-03 11:32:54,528 [salt.state       :1941][INFO    ][25301] Completed state [python-memcache] at time 11:32:54.528257 duration_in_ms=3316.979
2018-10-03 11:32:54,533 [salt.state       :1770][INFO    ][25301] Running state [/etc/memcached.conf] at time 11:32:54.533752
2018-10-03 11:32:54,534 [salt.state       :1803][INFO    ][25301] Executing state file.managed for [/etc/memcached.conf]
2018-10-03 11:32:54,569 [salt.fileclient  :1215][INFO    ][25301] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-10-03 11:32:54,603 [salt.state       :290 ][INFO    ][25301] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-10-03 11:32:54,611 [salt.state       :1941][INFO    ][25301] Completed state [/etc/memcached.conf] at time 11:32:54.611523 duration_in_ms=77.771
2018-10-03 11:32:54,922 [salt.state       :1770][INFO    ][25301] Running state [memcached] at time 11:32:54.922733
2018-10-03 11:32:54,923 [salt.state       :1803][INFO    ][25301] Executing state service.running for [memcached]
2018-10-03 11:32:54,923 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-03 11:32:54,936 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-03 11:32:54,947 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-03 11:32:54,957 [salt.state       :290 ][INFO    ][25301] The service memcached is already running
2018-10-03 11:32:54,958 [salt.state       :1941][INFO    ][25301] Completed state [memcached] at time 11:32:54.958294 duration_in_ms=35.562
2018-10-03 11:32:54,958 [salt.state       :1770][INFO    ][25301] Running state [memcached] at time 11:32:54.958858
2018-10-03 11:32:54,959 [salt.state       :1803][INFO    ][25301] Executing state service.mod_watch for [memcached]
2018-10-03 11:32:54,960 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-03 11:32:54,973 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25301] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-10-03 11:32:54,998 [salt.state       :290 ][INFO    ][25301] {'memcached': True}
2018-10-03 11:32:54,998 [salt.state       :1941][INFO    ][25301] Completed state [memcached] at time 11:32:54.998311 duration_in_ms=39.453
2018-10-03 11:32:54,999 [salt.minion      :1708][INFO    ][25301] Returning information for job: 20181003113235818897
2018-10-03 11:32:55,709 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command state.sls with jid 20181003113255706986
2018-10-03 11:32:55,727 [salt.minion      :1431][INFO    ][26298] Starting a new job with PID 26298
2018-10-03 11:32:56,474 [salt.state       :905 ][INFO    ][26298] Loading fresh modules for state activity
2018-10-03 11:32:57,732 [salt.fileclient  :1215][INFO    ][26298] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-10-03 11:32:57,756 [salt.fileclient  :1215][INFO    ][26298] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-10-03 11:32:58,347 [salt.state       :1770][INFO    ][26298] Running state [haproxy] at time 11:32:58.347382
2018-10-03 11:32:58,348 [salt.state       :1803][INFO    ][26298] Executing state pkg.installed for [haproxy]
2018-10-03 11:32:58,348 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:32:58,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-10-03 11:32:58,878 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 11:33:00,591 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 11:33:00,621 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-10-03 11:33:00,827 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003113300824121
2018-10-03 11:33:00,846 [salt.minion      :1431][INFO    ][26665] Starting a new job with PID 26665
2018-10-03 11:33:00,860 [salt.minion      :1708][INFO    ][26665] Returning information for job: 20181003113300824121
2018-10-03 11:33:10,901 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:33:10,940 [salt.state       :290 ][INFO    ][26298] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-10-03 11:33:10,955 [salt.state       :905 ][INFO    ][26298] Loading fresh modules for state activity
2018-10-03 11:33:10,980 [salt.state       :1941][INFO    ][26298] Completed state [haproxy] at time 11:33:10.980676 duration_in_ms=12633.294
2018-10-03 11:33:10,987 [salt.state       :1770][INFO    ][26298] Running state [/etc/default/haproxy] at time 11:33:10.987730
2018-10-03 11:33:10,988 [salt.state       :1803][INFO    ][26298] Executing state file.managed for [/etc/default/haproxy]
2018-10-03 11:33:11,015 [salt.fileclient  :1215][INFO    ][26298] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-10-03 11:33:11,018 [salt.state       :290 ][INFO    ][26298] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-10-03 11:33:11,018 [salt.state       :1941][INFO    ][26298] Completed state [/etc/default/haproxy] at time 11:33:11.018875 duration_in_ms=31.145
2018-10-03 11:33:11,019 [salt.state       :1770][INFO    ][26298] Running state [/etc/haproxy/haproxy.cfg] at time 11:33:11.019189
2018-10-03 11:33:11,019 [salt.state       :1803][INFO    ][26298] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-03 11:33:11,032 [salt.fileclient  :1215][INFO    ][26298] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-10-03 11:33:11,139 [salt.state       :290 ][INFO    ][26298] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 10.167.4.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8777 check
+  server mdb02 10.167.4.33:8777 check
+  server mdb03 10.167.4.34:8777 check
+
+listen panko_api
+  bind 10.167.4.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8977 check
+  server mdb02 10.167.4.33:8977 check
+  server mdb03 10.167.4.34:8977 check
+
+listen gnocchi_api
+  bind 10.167.4.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8041 check
+  server mdb02 10.167.4.33:8041 check
+  server mdb03 10.167.4.34:8041 check
+
+listen aodh-api
+  bind 10.167.4.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 10.167.4.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 10.167.4.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-10-03 11:33:11,139 [salt.state       :1941][INFO    ][26298] Completed state [/etc/haproxy/haproxy.cfg] at time 11:33:11.139696 duration_in_ms=120.507
2018-10-03 11:33:11,139 [salt.state       :1770][INFO    ][26298] Running state [/etc/haproxy/ssl] at time 11:33:11.139966
2018-10-03 11:33:11,140 [salt.state       :1803][INFO    ][26298] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-03 11:33:11,141 [salt.state       :290 ][INFO    ][26298] {'/etc/haproxy/ssl': 'New Dir'}
2018-10-03 11:33:11,141 [salt.state       :1941][INFO    ][26298] Completed state [/etc/haproxy/ssl] at time 11:33:11.141486 duration_in_ms=1.52
2018-10-03 11:33:11,141 [salt.state       :1770][INFO    ][26298] Running state [/etc/haproxy/errors/429.http11] at time 11:33:11.141736
2018-10-03 11:33:11,141 [salt.state       :1803][INFO    ][26298] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-03 11:33:11,156 [salt.fileclient  :1215][INFO    ][26298] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-10-03 11:33:11,162 [salt.state       :290 ][INFO    ][26298] File changed:
New file
2018-10-03 11:33:11,162 [salt.state       :1941][INFO    ][26298] Completed state [/etc/haproxy/errors/429.http11] at time 11:33:11.162258 duration_in_ms=20.522
2018-10-03 11:33:11,163 [salt.state       :1770][INFO    ][26298] Running state [haproxy_status_packages] at time 11:33:11.163091
2018-10-03 11:33:11,163 [salt.state       :1803][INFO    ][26298] Executing state pkg.installed for [haproxy_status_packages]
2018-10-03 11:33:11,418 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003113310981623
2018-10-03 11:33:11,435 [salt.minion      :1431][INFO    ][27145] Starting a new job with PID 27145
2018-10-03 11:33:11,448 [salt.minion      :1708][INFO    ][27145] Returning information for job: 20181003113310981623
2018-10-03 11:33:11,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 11:33:11,646 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-10-03 11:33:14,283 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 11:33:14,318 [salt.state       :290 ][INFO    ][26298] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-10-03 11:33:14,335 [salt.state       :905 ][INFO    ][26298] Loading fresh modules for state activity
2018-10-03 11:33:14,361 [salt.state       :1941][INFO    ][26298] Completed state [haproxy_status_packages] at time 11:33:14.361029 duration_in_ms=3197.934
2018-10-03 11:33:14,367 [salt.state       :1770][INFO    ][26298] Running state [/usr/bin/haproxy-status.sh] at time 11:33:14.367581
2018-10-03 11:33:14,368 [salt.state       :1803][INFO    ][26298] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-03 11:33:14,391 [salt.fileclient  :1215][INFO    ][26298] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-10-03 11:33:14,413 [salt.state       :290 ][INFO    ][26298] File changed:
New file
2018-10-03 11:33:14,413 [salt.state       :1941][INFO    ][26298] Completed state [/usr/bin/haproxy-status.sh] at time 11:33:14.413444 duration_in_ms=45.864
2018-10-03 11:33:14,415 [salt.state       :1770][INFO    ][26298] Running state [net.ipv4.ip_nonlocal_bind] at time 11:33:14.415432
2018-10-03 11:33:14,415 [salt.state       :1803][INFO    ][26298] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-03 11:33:14,418 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-10-03 11:33:14,430 [salt.state       :290 ][INFO    ][26298] {'net.ipv4.ip_nonlocal_bind': 1}
2018-10-03 11:33:14,431 [salt.state       :1941][INFO    ][26298] Completed state [net.ipv4.ip_nonlocal_bind] at time 11:33:14.431116 duration_in_ms=15.684
2018-10-03 11:33:14,744 [salt.state       :1770][INFO    ][26298] Running state [haproxy] at time 11:33:14.744917
2018-10-03 11:33:14,745 [salt.state       :1803][INFO    ][26298] Executing state service.running for [haproxy]
2018-10-03 11:33:14,745 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-03 11:33:14,758 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-03 11:33:14,768 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-03 11:33:14,778 [salt.state       :290 ][INFO    ][26298] The service haproxy is already running
2018-10-03 11:33:14,779 [salt.state       :1941][INFO    ][26298] Completed state [haproxy] at time 11:33:14.778955 duration_in_ms=34.039
2018-10-03 11:33:14,779 [salt.state       :1770][INFO    ][26298] Running state [haproxy] at time 11:33:14.779206
2018-10-03 11:33:14,779 [salt.state       :1803][INFO    ][26298] Executing state service.mod_watch for [haproxy]
2018-10-03 11:33:14,780 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-03 11:33:14,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26298] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-10-03 11:33:14,820 [salt.state       :290 ][INFO    ][26298] {'haproxy': True}
2018-10-03 11:33:14,820 [salt.state       :1941][INFO    ][26298] Completed state [haproxy] at time 11:33:14.820555 duration_in_ms=41.348
2018-10-03 11:33:14,822 [salt.minion      :1708][INFO    ][26298] Returning information for job: 20181003113255706986
2018-10-03 11:33:16,414 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command service.status with jid 20181003113316411639
2018-10-03 11:33:16,439 [salt.minion      :1431][INFO    ][27483] Starting a new job with PID 27483
2018-10-03 11:33:16,856 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27483] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-03 11:33:16,879 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27483] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-03 11:33:16,893 [salt.minion      :1708][INFO    ][27483] Returning information for job: 20181003113316411639
2018-10-03 11:33:17,926 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command service.restart with jid 20181003113317925943
2018-10-03 11:33:17,950 [salt.minion      :1431][INFO    ][27491] Starting a new job with PID 27491
2018-10-03 11:33:18,354 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27491] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-03 11:33:18,387 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27491] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-03 11:33:18,430 [salt.minion      :1708][INFO    ][27491] Returning information for job: 20181003113317925943
2018-10-03 12:03:03,349 [salt.utils.schedule:1375][INFO    ][3152] Running scheduled job: __mine_interval
2018-10-03 12:13:27,719 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command state.sls with jid 20181003121327712442
2018-10-03 12:13:27,738 [salt.minion      :1431][INFO    ][27641] Starting a new job with PID 27641
2018-10-03 12:13:28,438 [salt.state       :905 ][INFO    ][27641] Loading fresh modules for state activity
2018-10-03 12:13:28,482 [salt.fileclient  :1215][INFO    ][27641] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-10-03 12:13:28,511 [salt.fileclient  :1215][INFO    ][27641] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-10-03 12:13:28,532 [salt.fileclient  :1215][INFO    ][27641] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-10-03 12:13:28,566 [salt.fileclient  :1215][INFO    ][27641] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-10-03 12:13:29,160 [salt.state       :1770][INFO    ][27641] Running state [redis-server] at time 12:13:29.160046
2018-10-03 12:13:29,160 [salt.state       :1803][INFO    ][27641] Executing state pkg.installed for [redis-server]
2018-10-03 12:13:29,161 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:13:29,552 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-10-03 12:13:29,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 12:13:32,755 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121332748008
2018-10-03 12:13:32,797 [salt.minion      :1431][INFO    ][28004] Starting a new job with PID 28004
2018-10-03 12:13:32,812 [salt.minion      :1708][INFO    ][28004] Returning information for job: 20181003121332748008
2018-10-03 12:13:33,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:13:33,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-10-03 12:13:40,493 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:13:40,534 [salt.state       :290 ][INFO    ][27641] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-10-03 12:13:40,548 [salt.state       :905 ][INFO    ][27641] Loading fresh modules for state activity
2018-10-03 12:13:40,580 [salt.state       :1941][INFO    ][27641] Completed state [redis-server] at time 12:13:40.580371 duration_in_ms=11420.325
2018-10-03 12:13:40,583 [salt.state       :1770][INFO    ][27641] Running state [vm.overcommit_memory] at time 12:13:40.583317
2018-10-03 12:13:40,588 [salt.state       :1803][INFO    ][27641] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-03 12:13:40,594 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-10-03 12:13:40,607 [salt.state       :290 ][INFO    ][27641] {'vm.overcommit_memory': 1}
2018-10-03 12:13:40,608 [salt.state       :1941][INFO    ][27641] Completed state [vm.overcommit_memory] at time 12:13:40.608193 duration_in_ms=24.875
2018-10-03 12:13:40,611 [salt.state       :1770][INFO    ][27641] Running state [/etc/redis/redis.conf] at time 12:13:40.611300
2018-10-03 12:13:40,611 [salt.state       :1803][INFO    ][27641] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-03 12:13:40,642 [salt.fileclient  :1215][INFO    ][27641] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-10-03 12:13:40,689 [salt.state       :290 ][INFO    ][27641] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.32
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -505,8 +505,7 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
-appendonly no
+appendonly yes
 
 # The name of the append only file (default: "appendonly.aof")
 
@@ -535,9 +534,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-10-03 12:13:40,689 [salt.state       :1941][INFO    ][27641] Completed state [/etc/redis/redis.conf] at time 12:13:40.689714 duration_in_ms=78.412
2018-10-03 12:13:41,019 [salt.state       :1770][INFO    ][27641] Running state [redis-server] at time 12:13:41.019301
2018-10-03 12:13:41,019 [salt.state       :1803][INFO    ][27641] Executing state service.running for [redis-server]
2018-10-03 12:13:41,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-03 12:13:41,040 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-03 12:13:41,054 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-03 12:13:41,067 [salt.state       :290 ][INFO    ][27641] The service redis-server is already running
2018-10-03 12:13:41,068 [salt.state       :1941][INFO    ][27641] Completed state [redis-server] at time 12:13:41.068276 duration_in_ms=48.974
2018-10-03 12:13:41,069 [salt.state       :1770][INFO    ][27641] Running state [redis-server] at time 12:13:41.069158
2018-10-03 12:13:41,069 [salt.state       :1803][INFO    ][27641] Executing state service.mod_watch for [redis-server]
2018-10-03 12:13:41,071 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-03 12:13:41,085 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-10-03 12:13:41,418 [salt.state       :290 ][INFO    ][27641] {'redis-server': True}
2018-10-03 12:13:41,419 [salt.state       :1941][INFO    ][27641] Completed state [redis-server] at time 12:13:41.419360 duration_in_ms=350.2
2018-10-03 12:13:41,423 [salt.state       :1770][INFO    ][27641] Running state [redis-sentinel] at time 12:13:41.423651
2018-10-03 12:13:41,424 [salt.state       :1803][INFO    ][27641] Executing state pkg.installed for [redis-sentinel]
2018-10-03 12:13:41,601 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:13:41,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-10-03 12:13:42,969 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121342960013
2018-10-03 12:13:42,989 [salt.minion      :1431][INFO    ][28650] Starting a new job with PID 28650
2018-10-03 12:13:43,008 [salt.minion      :1708][INFO    ][28650] Returning information for job: 20181003121342960013
2018-10-03 12:13:46,028 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:13:46,073 [salt.state       :290 ][INFO    ][27641] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-10-03 12:13:46,086 [salt.state       :905 ][INFO    ][27641] Loading fresh modules for state activity
2018-10-03 12:13:46,113 [salt.state       :1941][INFO    ][27641] Completed state [redis-sentinel] at time 12:13:46.113143 duration_in_ms=4689.492
2018-10-03 12:13:46,467 [salt.state       :1770][INFO    ][27641] Running state [/etc/redis/sentinel.conf] at time 12:13:46.467788
2018-10-03 12:13:46,468 [salt.state       :1803][INFO    ][27641] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-03 12:13:46,488 [salt.fileclient  :1215][INFO    ][27641] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-10-03 12:13:46,517 [salt.state       :290 ][INFO    ][27641] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.32
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 10.167.4.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-10-03 12:13:46,520 [salt.state       :1941][INFO    ][27641] Completed state [/etc/redis/sentinel.conf] at time 12:13:46.520502 duration_in_ms=52.713
2018-10-03 12:13:46,521 [salt.state       :1770][INFO    ][27641] Running state [redis-sentinel] at time 12:13:46.521153
2018-10-03 12:13:46,521 [salt.state       :1803][INFO    ][27641] Executing state service.running for [redis-sentinel]
2018-10-03 12:13:46,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-03 12:13:46,540 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-03 12:13:46,555 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-03 12:13:46,572 [salt.state       :290 ][INFO    ][27641] The service redis-sentinel is already running
2018-10-03 12:13:46,573 [salt.state       :1941][INFO    ][27641] Completed state [redis-sentinel] at time 12:13:46.573439 duration_in_ms=52.286
2018-10-03 12:13:46,574 [salt.state       :1770][INFO    ][27641] Running state [redis-sentinel] at time 12:13:46.574214
2018-10-03 12:13:46,575 [salt.state       :1803][INFO    ][27641] Executing state service.mod_watch for [redis-sentinel]
2018-10-03 12:13:46,576 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-03 12:13:46,596 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27641] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-10-03 12:13:46,847 [salt.state       :290 ][INFO    ][27641] {'redis-sentinel': True}
2018-10-03 12:13:46,848 [salt.state       :1941][INFO    ][27641] Completed state [redis-sentinel] at time 12:13:46.848545 duration_in_ms=274.331
2018-10-03 12:13:46,851 [salt.minion      :1708][INFO    ][27641] Returning information for job: 20181003121327712442
2018-10-03 12:13:47,585 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command state.sls with jid 20181003121347577786
2018-10-03 12:13:47,608 [salt.minion      :1431][INFO    ][28953] Starting a new job with PID 28953
2018-10-03 12:13:52,625 [salt.state       :905 ][INFO    ][28953] Loading fresh modules for state activity
2018-10-03 12:13:52,630 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121352620428
2018-10-03 12:13:52,650 [salt.minion      :1431][INFO    ][28960] Starting a new job with PID 28960
2018-10-03 12:13:52,676 [salt.minion      :1708][INFO    ][28960] Returning information for job: 20181003121352620428
2018-10-03 12:13:53,318 [salt.state       :1770][INFO    ][28953] Running state [redis-server] at time 12:13:53.318214
2018-10-03 12:13:53,318 [salt.state       :1803][INFO    ][28953] Executing state pkg.installed for [redis-server]
2018-10-03 12:13:53,319 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28953] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:13:53,686 [salt.state       :290 ][INFO    ][28953] All specified packages are already installed
2018-10-03 12:13:53,687 [salt.state       :1941][INFO    ][28953] Completed state [redis-server] at time 12:13:53.687527 duration_in_ms=369.314
2018-10-03 12:13:53,688 [salt.state       :1770][INFO    ][28953] Running state [vm.overcommit_memory] at time 12:13:53.688601
2018-10-03 12:13:53,689 [salt.state       :1803][INFO    ][28953] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-03 12:13:53,710 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28953] Executing command 'sysctl -n vm.overcommit_memory' in directory '/root'
2018-10-03 12:13:53,727 [salt.state       :290 ][INFO    ][28953] Sysctl value vm.overcommit_memory = 1 is already set
2018-10-03 12:13:53,728 [salt.state       :1941][INFO    ][28953] Completed state [vm.overcommit_memory] at time 12:13:53.728391 duration_in_ms=39.789
2018-10-03 12:13:53,736 [salt.state       :1770][INFO    ][28953] Running state [/etc/redis/redis.conf] at time 12:13:53.736429
2018-10-03 12:13:53,736 [salt.state       :1803][INFO    ][28953] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-03 12:13:53,789 [salt.state       :290 ][INFO    ][28953] File /etc/redis/redis.conf is in the correct state
2018-10-03 12:13:53,790 [salt.state       :1941][INFO    ][28953] Completed state [/etc/redis/redis.conf] at time 12:13:53.790240 duration_in_ms=53.81
2018-10-03 12:13:53,791 [salt.state       :1770][INFO    ][28953] Running state [redis-server] at time 12:13:53.791216
2018-10-03 12:13:53,791 [salt.state       :1803][INFO    ][28953] Executing state service.running for [redis-server]
2018-10-03 12:13:53,792 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28953] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-03 12:13:53,818 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28953] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-03 12:13:53,837 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28953] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-03 12:13:53,852 [salt.state       :290 ][INFO    ][28953] The service redis-server is already running
2018-10-03 12:13:53,852 [salt.state       :1941][INFO    ][28953] Completed state [redis-server] at time 12:13:53.852746 duration_in_ms=61.53
2018-10-03 12:13:53,853 [salt.state       :1770][INFO    ][28953] Running state [redis-sentinel] at time 12:13:53.853286
2018-10-03 12:13:53,853 [salt.state       :1803][INFO    ][28953] Executing state pkg.installed for [redis-sentinel]
2018-10-03 12:13:53,864 [salt.state       :290 ][INFO    ][28953] All specified packages are already installed
2018-10-03 12:13:53,864 [salt.state       :1941][INFO    ][28953] Completed state [redis-sentinel] at time 12:13:53.864582 duration_in_ms=11.296
2018-10-03 12:13:53,865 [salt.state       :1770][INFO    ][28953] Running state [/etc/redis/sentinel.conf] at time 12:13:53.865901
2018-10-03 12:13:53,866 [salt.state       :1803][INFO    ][28953] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-03 12:13:53,909 [salt.state       :290 ][INFO    ][28953] File /etc/redis/sentinel.conf is in the correct state
2018-10-03 12:13:53,909 [salt.state       :1941][INFO    ][28953] Completed state [/etc/redis/sentinel.conf] at time 12:13:53.909453 duration_in_ms=43.553
2018-10-03 12:13:53,909 [salt.state       :1770][INFO    ][28953] Running state [redis-sentinel] at time 12:13:53.909774
2018-10-03 12:13:53,910 [salt.state       :1803][INFO    ][28953] Executing state service.running for [redis-sentinel]
2018-10-03 12:13:53,910 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28953] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-03 12:13:53,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28953] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-03 12:13:53,952 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28953] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-03 12:13:53,969 [salt.state       :290 ][INFO    ][28953] The service redis-sentinel is already running
2018-10-03 12:13:53,970 [salt.state       :1941][INFO    ][28953] Completed state [redis-sentinel] at time 12:13:53.969926 duration_in_ms=60.152
2018-10-03 12:13:53,972 [salt.minion      :1708][INFO    ][28953] Returning information for job: 20181003121347577786
2018-10-03 12:14:10,095 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command test.ping with jid 20181003121410086557
2018-10-03 12:14:10,117 [salt.minion      :1431][INFO    ][28994] Starting a new job with PID 28994
2018-10-03 12:14:10,138 [salt.minion      :1708][INFO    ][28994] Returning information for job: 20181003121410086557
2018-10-03 12:14:10,274 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command state.sls with jid 20181003121410264037
2018-10-03 12:14:10,297 [salt.minion      :1431][INFO    ][28999] Starting a new job with PID 28999
2018-10-03 12:14:14,294 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-03 12:14:14,336 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-10-03 12:14:14,364 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-10-03 12:14:14,421 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-10-03 12:14:14,447 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-10-03 12:14:14,473 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-10-03 12:14:14,534 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-10-03 12:14:14,588 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-10-03 12:14:14,642 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-10-03 12:14:14,754 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-10-03 12:14:14,808 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-10-03 12:14:14,856 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-10-03 12:14:14,903 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-10-03 12:14:15,315 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121415305028
2018-10-03 12:14:15,330 [salt.minion      :1431][INFO    ][29031] Starting a new job with PID 29031
2018-10-03 12:14:15,348 [salt.minion      :1708][INFO    ][29031] Returning information for job: 20181003121415305028
2018-10-03 12:14:15,519 [salt.state       :1770][INFO    ][28999] Running state [apache2] at time 12:14:15.519558
2018-10-03 12:14:15,520 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [apache2]
2018-10-03 12:14:15,520 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:14:15,899 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-10-03 12:14:16,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 12:14:17,777 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:14:17,803 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-10-03 12:14:25,454 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121425446298
2018-10-03 12:14:25,472 [salt.minion      :1431][INFO    ][30012] Starting a new job with PID 30012
2018-10-03 12:14:25,490 [salt.minion      :1708][INFO    ][30012] Returning information for job: 20181003121425446298
2018-10-03 12:14:35,600 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121435592223
2018-10-03 12:14:35,614 [salt.minion      :1431][INFO    ][30492] Starting a new job with PID 30492
2018-10-03 12:14:35,629 [salt.minion      :1708][INFO    ][30492] Returning information for job: 20181003121435592223
2018-10-03 12:14:35,650 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:14:35,686 [salt.state       :290 ][INFO    ][28999] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-10-03 12:14:35,701 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-03 12:14:35,727 [salt.state       :1941][INFO    ][28999] Completed state [apache2] at time 12:14:35.727184 duration_in_ms=20207.625
2018-10-03 12:14:35,735 [salt.state       :1770][INFO    ][28999] Running state [openssl] at time 12:14:35.735788
2018-10-03 12:14:35,736 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [openssl]
2018-10-03 12:14:36,236 [salt.state       :290 ][INFO    ][28999] All specified packages are already installed
2018-10-03 12:14:36,237 [salt.state       :1941][INFO    ][28999] Completed state [openssl] at time 12:14:36.237377 duration_in_ms=501.589
2018-10-03 12:14:36,238 [salt.state       :1770][INFO    ][28999] Running state [a2enmod rewrite] at time 12:14:36.238570
2018-10-03 12:14:36,238 [salt.state       :1803][INFO    ][28999] Executing state cmd.run for [a2enmod rewrite]
2018-10-03 12:14:36,239 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command 'a2enmod rewrite' in directory '/root'
2018-10-03 12:14:36,289 [salt.state       :290 ][INFO    ][28999] {'pid': 30532, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-03 12:14:36,290 [salt.state       :1941][INFO    ][28999] Completed state [a2enmod rewrite] at time 12:14:36.290231 duration_in_ms=51.661
2018-10-03 12:14:36,291 [salt.state       :1770][INFO    ][28999] Running state [libapache2-mod-wsgi] at time 12:14:36.290966
2018-10-03 12:14:36,291 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-03 12:14:36,309 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:14:36,337 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-10-03 12:14:41,891 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:14:41,932 [salt.state       :290 ][INFO    ][28999] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-10-03 12:14:41,944 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-03 12:14:41,968 [salt.state       :1941][INFO    ][28999] Completed state [libapache2-mod-wsgi] at time 12:14:41.968056 duration_in_ms=5677.09
2018-10-03 12:14:41,970 [salt.state       :1770][INFO    ][28999] Running state [a2enmod wsgi] at time 12:14:41.970208
2018-10-03 12:14:41,970 [salt.state       :1803][INFO    ][28999] Executing state cmd.run for [a2enmod wsgi]
2018-10-03 12:14:41,970 [salt.state       :290 ][INFO    ][28999] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-03 12:14:41,970 [salt.state       :1941][INFO    ][28999] Completed state [a2enmod wsgi] at time 12:14:41.970888 duration_in_ms=0.679
2018-10-03 12:14:41,973 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 12:14:41.973951
2018-10-03 12:14:41,974 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-03 12:14:42,006 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-10-03 12:14:42,044 [salt.state       :290 ][INFO    ][28999] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-10-03 12:14:42,045 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 12:14:42.045002 duration_in_ms=71.051
2018-10-03 12:14:42,045 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 12:14:42.045192
2018-10-03 12:14:42,045 [salt.state       :1803][INFO    ][28999] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-03 12:14:42,045 [salt.state       :290 ][INFO    ][28999] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-03 12:14:42,045 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 12:14:42.045765 duration_in_ms=0.573
2018-10-03 12:14:42,045 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 12:14:42.045927
2018-10-03 12:14:42,046 [salt.state       :1803][INFO    ][28999] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-03 12:14:42,046 [salt.state       :290 ][INFO    ][28999] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-10-03 12:14:42,046 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 12:14:42.046460 duration_in_ms=0.533
2018-10-03 12:14:42,046 [salt.state       :1770][INFO    ][28999] Running state [a2enmod mpm_prefork] at time 12:14:42.046923
2018-10-03 12:14:42,047 [salt.state       :1803][INFO    ][28999] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-03 12:14:42,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-10-03 12:14:42,089 [salt.state       :290 ][INFO    ][28999] {'pid': 30863, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-03 12:14:42,090 [salt.state       :1941][INFO    ][28999] Completed state [a2enmod mpm_prefork] at time 12:14:42.090842 duration_in_ms=43.919
2018-10-03 12:14:42,091 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 12:14:42.091250
2018-10-03 12:14:42,091 [salt.state       :1803][INFO    ][28999] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-03 12:14:42,091 [salt.state       :290 ][INFO    ][28999] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-03 12:14:42,092 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 12:14:42.092132 duration_in_ms=0.882
2018-10-03 12:14:42,092 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 12:14:42.092326
2018-10-03 12:14:42,092 [salt.state       :1803][INFO    ][28999] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-03 12:14:42,092 [salt.state       :290 ][INFO    ][28999] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-10-03 12:14:42,092 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 12:14:42.092948 duration_in_ms=0.622
2018-10-03 12:14:42,094 [salt.state       :1770][INFO    ][28999] Running state [apache_server_service_task] at time 12:14:42.094462
2018-10-03 12:14:42,094 [salt.state       :1803][INFO    ][28999] Executing state test.show_notification for [apache_server_service_task]
2018-10-03 12:14:42,094 [salt.state       :290 ][INFO    ][28999] Running apache.server.service
2018-10-03 12:14:42,095 [salt.state       :1941][INFO    ][28999] Completed state [apache_server_service_task] at time 12:14:42.095009 duration_in_ms=0.547
2018-10-03 12:14:42,095 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/ports.conf] at time 12:14:42.095437
2018-10-03 12:14:42,095 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-03 12:14:42,111 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-10-03 12:14:42,148 [salt.state       :290 ][INFO    ][28999] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-10-03 12:14:42,148 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/ports.conf] at time 12:14:42.148719 duration_in_ms=53.281
2018-10-03 12:14:42,149 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/conf-available/security.conf] at time 12:14:42.149054
2018-10-03 12:14:42,149 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-03 12:14:42,163 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-10-03 12:14:42,198 [salt.state       :290 ][INFO    ][28999] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-10-03 12:14:42,199 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/conf-available/security.conf] at time 12:14:42.199036 duration_in_ms=49.981
2018-10-03 12:14:42,537 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 12:14:42.537675
2018-10-03 12:14:42,538 [salt.state       :1803][INFO    ][28999] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-03 12:14:42,538 [salt.state       :290 ][INFO    ][28999] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-10-03 12:14:42,538 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 12:14:42.538531 duration_in_ms=0.858
2018-10-03 12:14:42,538 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 12:14:42.538829
2018-10-03 12:14:42,539 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-03 12:14:42,554 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-10-03 12:14:42,579 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-10-03 12:14:42,622 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-10-03 12:14:42,640 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-10-03 12:14:42,696 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-10-03 12:14:42,712 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-10-03 12:14:42,733 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-10-03 12:14:42,744 [salt.state       :290 ][INFO    ][28999] File changed:
New file
2018-10-03 12:14:42,744 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 12:14:42.744593 duration_in_ms=205.765
2018-10-03 12:14:42,744 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 12:14:42.744888
2018-10-03 12:14:42,745 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-03 12:14:42,891 [salt.state       :290 ][INFO    ][28999] File changed:
New file
2018-10-03 12:14:42,891 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 12:14:42.891225 duration_in_ms=146.336
2018-10-03 12:14:42,892 [salt.state       :1770][INFO    ][28999] Running state [apache2] at time 12:14:42.892744
2018-10-03 12:14:42,893 [salt.state       :1803][INFO    ][28999] Executing state service.running for [apache2]
2018-10-03 12:14:42,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-03 12:14:42,917 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 12:14:42,937 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 12:14:42,958 [salt.state       :290 ][INFO    ][28999] The service apache2 is already running
2018-10-03 12:14:42,959 [salt.state       :1941][INFO    ][28999] Completed state [apache2] at time 12:14:42.959297 duration_in_ms=66.553
2018-10-03 12:14:42,959 [salt.state       :1770][INFO    ][28999] Running state [apache2] at time 12:14:42.959935
2018-10-03 12:14:42,960 [salt.state       :1803][INFO    ][28999] Executing state service.mod_watch for [apache2]
2018-10-03 12:14:42,962 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 12:14:42,981 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-10-03 12:14:43,151 [salt.state       :290 ][INFO    ][28999] {'apache2': True}
2018-10-03 12:14:43,152 [salt.state       :1941][INFO    ][28999] Completed state [apache2] at time 12:14:43.152388 duration_in_ms=192.453
2018-10-03 12:14:43,153 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/conf-enabled/security.conf] at time 12:14:43.153304
2018-10-03 12:14:43,153 [salt.state       :1803][INFO    ][28999] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-03 12:14:43,159 [salt.state       :290 ][INFO    ][28999] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-10-03 12:14:43,161 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/conf-enabled/security.conf] at time 12:14:43.160980 duration_in_ms=7.676
2018-10-03 12:14:43,163 [salt.state       :1770][INFO    ][28999] Running state [gnocchi-common] at time 12:14:43.163443
2018-10-03 12:14:43,163 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [gnocchi-common]
2018-10-03 12:14:43,362 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:14:43,394 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-10-03 12:14:45,737 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121445729040
2018-10-03 12:14:45,758 [salt.minion      :1431][INFO    ][30987] Starting a new job with PID 30987
2018-10-03 12:14:45,822 [salt.minion      :1708][INFO    ][30987] Returning information for job: 20181003121445729040
2018-10-03 12:14:55,943 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121455934402
2018-10-03 12:14:55,963 [salt.minion      :1431][INFO    ][31213] Starting a new job with PID 31213
2018-10-03 12:14:56,030 [salt.minion      :1708][INFO    ][31213] Returning information for job: 20181003121455934402
2018-10-03 12:15:06,141 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121506132168
2018-10-03 12:15:06,160 [salt.minion      :1431][INFO    ][31422] Starting a new job with PID 31422
2018-10-03 12:15:06,226 [salt.minion      :1708][INFO    ][31422] Returning information for job: 20181003121506132168
2018-10-03 12:15:16,201 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121516190401
2018-10-03 12:15:16,225 [salt.minion      :1431][INFO    ][31641] Starting a new job with PID 31641
2018-10-03 12:15:16,291 [salt.minion      :1708][INFO    ][31641] Returning information for job: 20181003121516190401
2018-10-03 12:15:26,405 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121526395758
2018-10-03 12:15:26,426 [salt.minion      :1431][INFO    ][31874] Starting a new job with PID 31874
2018-10-03 12:15:26,491 [salt.minion      :1708][INFO    ][31874] Returning information for job: 20181003121526395758
2018-10-03 12:15:36,604 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121536595404
2018-10-03 12:15:36,624 [salt.minion      :1431][INFO    ][32098] Starting a new job with PID 32098
2018-10-03 12:15:36,690 [salt.minion      :1708][INFO    ][32098] Returning information for job: 20181003121536595404
2018-10-03 12:15:46,800 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121546793170
2018-10-03 12:15:46,816 [salt.minion      :1431][INFO    ][32319] Starting a new job with PID 32319
2018-10-03 12:15:46,876 [salt.minion      :1708][INFO    ][32319] Returning information for job: 20181003121546793170
2018-10-03 12:15:56,993 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121556983233
2018-10-03 12:15:57,010 [salt.minion      :1431][INFO    ][513] Starting a new job with PID 513
2018-10-03 12:15:57,075 [salt.minion      :1708][INFO    ][513] Returning information for job: 20181003121556983233
2018-10-03 12:16:07,194 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121607184875
2018-10-03 12:16:07,226 [salt.minion      :1431][INFO    ][530] Starting a new job with PID 530
2018-10-03 12:16:07,281 [salt.minion      :1708][INFO    ][530] Returning information for job: 20181003121607184875
2018-10-03 12:16:17,401 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121617393047
2018-10-03 12:16:17,415 [salt.minion      :1431][INFO    ][892] Starting a new job with PID 892
2018-10-03 12:16:17,474 [salt.minion      :1708][INFO    ][892] Returning information for job: 20181003121617393047
2018-10-03 12:16:27,595 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121627587118
2018-10-03 12:16:27,614 [salt.minion      :1431][INFO    ][1189] Starting a new job with PID 1189
2018-10-03 12:16:27,679 [salt.minion      :1708][INFO    ][1189] Returning information for job: 20181003121627587118
2018-10-03 12:16:37,802 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121637792610
2018-10-03 12:16:37,826 [salt.minion      :1431][INFO    ][1546] Starting a new job with PID 1546
2018-10-03 12:16:37,890 [salt.minion      :1708][INFO    ][1546] Returning information for job: 20181003121637792610
2018-10-03 12:16:41,960 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:16:42,005 [salt.state       :290 ][INFO    ][28999] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp4'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.1-1.0~u16.04+mcp16'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp5'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp6'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-10-03 12:16:42,025 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-03 12:16:42,049 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi-common] at time 12:16:42.049647 duration_in_ms=118886.203
2018-10-03 12:16:42,053 [salt.state       :1770][INFO    ][28999] Running state [gnocchi_ssl_mysql] at time 12:16:42.053091
2018-10-03 12:16:42,053 [salt.state       :1803][INFO    ][28999] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-10-03 12:16:42,053 [salt.state       :290 ][INFO    ][28999] Running gnocchi._ssl.mysql
2018-10-03 12:16:42,054 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi_ssl_mysql] at time 12:16:42.053980 duration_in_ms=0.889
2018-10-03 12:16:42,057 [salt.state       :1770][INFO    ][28999] Running state [/etc/gnocchi/gnocchi.conf] at time 12:16:42.057269
2018-10-03 12:16:42,057 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-10-03 12:16:42,084 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-10-03 12:16:42,152 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-10-03 12:16:42,178 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-10-03 12:16:42,200 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-10-03 12:16:42,230 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-10-03 12:16:42,237 [salt.state       :290 ][INFO    ][28999] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@10.167.4.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -515,153 +316,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +480,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://10.167.4.32:6379

2018-10-03 12:16:42,244 [salt.state       :1941][INFO    ][28999] Completed state [/etc/gnocchi/gnocchi.conf] at time 12:16:42.244875 duration_in_ms=187.606
2018-10-03 12:16:42,251 [salt.state       :1770][INFO    ][28999] Running state [gnocchi-api] at time 12:16:42.251015
2018-10-03 12:16:42,251 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [gnocchi-api]
2018-10-03 12:16:43,359 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:16:43,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-10-03 12:16:48,017 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121648009333
2018-10-03 12:16:48,040 [salt.minion      :1431][INFO    ][1807] Starting a new job with PID 1807
2018-10-03 12:16:48,056 [salt.minion      :1708][INFO    ][1807] Returning information for job: 20181003121648009333
2018-10-03 12:16:58,184 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121658174602
2018-10-03 12:16:58,201 [salt.minion      :1431][INFO    ][2430] Starting a new job with PID 2430
2018-10-03 12:16:58,224 [salt.minion      :1708][INFO    ][2430] Returning information for job: 20181003121658174602
2018-10-03 12:17:04,084 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:17:04,139 [salt.state       :290 ][INFO    ][28999] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp10'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-10-03 12:17:04,156 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-03 12:17:04,185 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi-api] at time 12:17:04.185107 duration_in_ms=21934.09
2018-10-03 12:17:04,194 [salt.state       :1770][INFO    ][28999] Running state [gnocchi-metricd] at time 12:17:04.194611
2018-10-03 12:17:04,194 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [gnocchi-metricd]
2018-10-03 12:17:04,945 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:17:04,979 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-10-03 12:17:08,353 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003121708346071
2018-10-03 12:17:08,369 [salt.minion      :1431][INFO    ][2808] Starting a new job with PID 2808
2018-10-03 12:17:08,386 [salt.minion      :1708][INFO    ][2808] Returning information for job: 20181003121708346071
2018-10-03 12:17:08,965 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:17:09,008 [salt.state       :290 ][INFO    ][28999] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-10-03 12:17:09,028 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-03 12:17:09,157 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi-metricd] at time 12:17:09.157070 duration_in_ms=4962.459
2018-10-03 12:17:09,161 [salt.state       :1770][INFO    ][28999] Running state [python-memcache] at time 12:17:09.161491
2018-10-03 12:17:09,161 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [python-memcache]
2018-10-03 12:17:09,647 [salt.state       :290 ][INFO    ][28999] All specified packages are already installed
2018-10-03 12:17:09,648 [salt.state       :1941][INFO    ][28999] Completed state [python-memcache] at time 12:17:09.648036 duration_in_ms=486.545
2018-10-03 12:17:09,649 [salt.state       :1770][INFO    ][28999] Running state [gnocchi-upgrade] at time 12:17:09.649515
2018-10-03 12:17:09,649 [salt.state       :1803][INFO    ][28999] Executing state cmd.run for [gnocchi-upgrade]
2018-10-03 12:17:09,650 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-10-03 12:17:13,461 [salt.state       :290 ][INFO    ][28999] {'pid': 2878, 'retcode': 0, 'stderr': '2018-10-03 12:17:10,846 [2886] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-10-03 12:17:11,124 [2886] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@10.167.4.23/gnocchi?charset=utf8\n2018-10-03 12:17:13,337 [2886] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=10.167.4.32,port=6379,db=0>>>\n2018-10-03 12:17:13,338 [2886] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-10-03 12:17:13,462 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi-upgrade] at time 12:17:13.462408 duration_in_ms=3812.893
2018-10-03 12:17:13,464 [salt.state       :1770][INFO    ][28999] Running state [wsgi_gnocchi] at time 12:17:13.464419
2018-10-03 12:17:13,464 [salt.state       :1803][INFO    ][28999] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-10-03 12:17:13,465 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-10-03 12:17:13,518 [salt.state       :290 ][INFO    ][28999] {'new': 'wsgi_gnocchi', 'old': None}
2018-10-03 12:17:13,519 [salt.state       :1941][INFO    ][28999] Completed state [wsgi_gnocchi] at time 12:17:13.519635 duration_in_ms=55.215
2018-10-03 12:17:13,523 [salt.state       :1770][INFO    ][28999] Running state [apache2] at time 12:17:13.523861
2018-10-03 12:17:13,524 [salt.state       :1803][INFO    ][28999] Executing state service.running for [apache2]
2018-10-03 12:17:13,525 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 12:17:13,546 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 12:17:13,563 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-10-03 12:17:14,758 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 12:17:14,779 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 12:17:14,802 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 12:17:14,828 [salt.state       :290 ][INFO    ][28999] {'apache2': True}
2018-10-03 12:17:14,829 [salt.state       :1941][INFO    ][28999] Completed state [apache2] at time 12:17:14.829677 duration_in_ms=1305.815
2018-10-03 12:17:14,837 [salt.state       :1770][INFO    ][28999] Running state [gnocchi-metricd] at time 12:17:14.836992
2018-10-03 12:17:14,837 [salt.state       :1803][INFO    ][28999] Executing state service.running for [gnocchi-metricd]
2018-10-03 12:17:14,838 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-10-03 12:17:14,860 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 12:17:14,883 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 12:17:14,916 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 12:17:14,956 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 12:17:14,980 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 12:17:15,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 12:17:15,039 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 12:17:15,549 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-03 12:17:15,573 [salt.state       :290 ][INFO    ][28999] {'gnocchi-metricd': True}
2018-10-03 12:17:15,576 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi-metricd] at time 12:17:15.576152 duration_in_ms=739.16
2018-10-03 12:17:15,578 [salt.minion      :1708][INFO    ][28999] Returning information for job: 20181003121410264037
2018-10-03 12:23:01,828 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command test.ping with jid 20181003122301821804
2018-10-03 12:23:01,850 [salt.minion      :1431][INFO    ][3195] Starting a new job with PID 3195
2018-10-03 12:23:01,869 [salt.minion      :1708][INFO    ][3195] Returning information for job: 20181003122301821804
2018-10-03 12:23:02,015 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command state.sls with jid 20181003122302004143
2018-10-03 12:23:02,037 [salt.minion      :1431][INFO    ][3202] Starting a new job with PID 3202
2018-10-03 12:23:05,899 [salt.state       :905 ][INFO    ][3202] Loading fresh modules for state activity
2018-10-03 12:23:05,945 [salt.fileclient  :1215][INFO    ][3202] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-10-03 12:23:05,970 [salt.fileclient  :1215][INFO    ][3202] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-10-03 12:23:06,423 [salt.fileclient  :1215][INFO    ][3202] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-10-03 12:23:07,050 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122307042031
2018-10-03 12:23:07,071 [salt.minion      :1431][INFO    ][3232] Starting a new job with PID 3232
2018-10-03 12:23:07,087 [salt.minion      :1708][INFO    ][3232] Returning information for job: 20181003122307042031
2018-10-03 12:23:07,691 [salt.state       :1770][INFO    ][3202] Running state [apache2] at time 12:23:07.691442
2018-10-03 12:23:07,691 [salt.state       :1803][INFO    ][3202] Executing state pkg.installed for [apache2]
2018-10-03 12:23:07,692 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:23:08,077 [salt.state       :290 ][INFO    ][3202] All specified packages are already installed
2018-10-03 12:23:08,077 [salt.state       :1941][INFO    ][3202] Completed state [apache2] at time 12:23:08.077708 duration_in_ms=386.266
2018-10-03 12:23:08,078 [salt.state       :1770][INFO    ][3202] Running state [openssl] at time 12:23:08.078004
2018-10-03 12:23:08,078 [salt.state       :1803][INFO    ][3202] Executing state pkg.installed for [openssl]
2018-10-03 12:23:08,083 [salt.state       :290 ][INFO    ][3202] All specified packages are already installed
2018-10-03 12:23:08,083 [salt.state       :1941][INFO    ][3202] Completed state [openssl] at time 12:23:08.083486 duration_in_ms=5.481
2018-10-03 12:23:08,083 [salt.state       :1770][INFO    ][3202] Running state [a2enmod rewrite] at time 12:23:08.083898
2018-10-03 12:23:08,084 [salt.state       :1803][INFO    ][3202] Executing state cmd.run for [a2enmod rewrite]
2018-10-03 12:23:08,084 [salt.state       :290 ][INFO    ][3202] /etc/apache2/mods-enabled/rewrite.load exists
2018-10-03 12:23:08,084 [salt.state       :1941][INFO    ][3202] Completed state [a2enmod rewrite] at time 12:23:08.084562 duration_in_ms=0.663
2018-10-03 12:23:08,084 [salt.state       :1770][INFO    ][3202] Running state [libapache2-mod-wsgi] at time 12:23:08.084864
2018-10-03 12:23:08,085 [salt.state       :1803][INFO    ][3202] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-03 12:23:08,090 [salt.state       :290 ][INFO    ][3202] All specified packages are already installed
2018-10-03 12:23:08,090 [salt.state       :1941][INFO    ][3202] Completed state [libapache2-mod-wsgi] at time 12:23:08.090196 duration_in_ms=5.332
2018-10-03 12:23:08,090 [salt.state       :1770][INFO    ][3202] Running state [a2enmod wsgi] at time 12:23:08.090492
2018-10-03 12:23:08,090 [salt.state       :1803][INFO    ][3202] Executing state cmd.run for [a2enmod wsgi]
2018-10-03 12:23:08,090 [salt.state       :290 ][INFO    ][3202] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-03 12:23:08,091 [salt.state       :1941][INFO    ][3202] Completed state [a2enmod wsgi] at time 12:23:08.091085 duration_in_ms=0.593
2018-10-03 12:23:08,095 [salt.state       :1770][INFO    ][3202] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 12:23:08.095229
2018-10-03 12:23:08,095 [salt.state       :1803][INFO    ][3202] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-03 12:23:08,251 [salt.state       :290 ][INFO    ][3202] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-10-03 12:23:08,252 [salt.state       :1941][INFO    ][3202] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 12:23:08.252023 duration_in_ms=156.794
2018-10-03 12:23:08,252 [salt.state       :1770][INFO    ][3202] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 12:23:08.252236
2018-10-03 12:23:08,252 [salt.state       :1803][INFO    ][3202] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-03 12:23:08,252 [salt.state       :290 ][INFO    ][3202] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-03 12:23:08,252 [salt.state       :1941][INFO    ][3202] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 12:23:08.252855 duration_in_ms=0.618
2018-10-03 12:23:08,253 [salt.state       :1770][INFO    ][3202] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 12:23:08.253034
2018-10-03 12:23:08,253 [salt.state       :1803][INFO    ][3202] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-03 12:23:08,253 [salt.state       :290 ][INFO    ][3202] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-10-03 12:23:08,253 [salt.state       :1941][INFO    ][3202] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 12:23:08.253595 duration_in_ms=0.561
2018-10-03 12:23:08,254 [salt.state       :1770][INFO    ][3202] Running state [a2enmod mpm_prefork] at time 12:23:08.254030
2018-10-03 12:23:08,254 [salt.state       :1803][INFO    ][3202] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-03 12:23:08,254 [salt.state       :290 ][INFO    ][3202] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-10-03 12:23:08,254 [salt.state       :1941][INFO    ][3202] Completed state [a2enmod mpm_prefork] at time 12:23:08.254625 duration_in_ms=0.595
2018-10-03 12:23:08,254 [salt.state       :1770][INFO    ][3202] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 12:23:08.254804
2018-10-03 12:23:08,254 [salt.state       :1803][INFO    ][3202] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-03 12:23:08,255 [salt.state       :290 ][INFO    ][3202] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-03 12:23:08,255 [salt.state       :1941][INFO    ][3202] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 12:23:08.255342 duration_in_ms=0.538
2018-10-03 12:23:08,255 [salt.state       :1770][INFO    ][3202] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 12:23:08.255523
2018-10-03 12:23:08,255 [salt.state       :1803][INFO    ][3202] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-03 12:23:08,255 [salt.state       :290 ][INFO    ][3202] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-10-03 12:23:08,256 [salt.state       :1941][INFO    ][3202] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 12:23:08.256057 duration_in_ms=0.533
2018-10-03 12:23:08,256 [salt.state       :1770][INFO    ][3202] Running state [apache_server_service_task] at time 12:23:08.256733
2018-10-03 12:23:08,256 [salt.state       :1803][INFO    ][3202] Executing state test.show_notification for [apache_server_service_task]
2018-10-03 12:23:08,257 [salt.state       :290 ][INFO    ][3202] Running apache.server.service
2018-10-03 12:23:08,257 [salt.state       :1941][INFO    ][3202] Completed state [apache_server_service_task] at time 12:23:08.257271 duration_in_ms=0.537
2018-10-03 12:23:08,257 [salt.state       :1770][INFO    ][3202] Running state [/etc/apache2/ports.conf] at time 12:23:08.257554
2018-10-03 12:23:08,257 [salt.state       :1803][INFO    ][3202] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-03 12:23:08,298 [salt.state       :290 ][INFO    ][3202] File /etc/apache2/ports.conf is in the correct state
2018-10-03 12:23:08,299 [salt.state       :1941][INFO    ][3202] Completed state [/etc/apache2/ports.conf] at time 12:23:08.299026 duration_in_ms=41.472
2018-10-03 12:23:08,299 [salt.state       :1770][INFO    ][3202] Running state [/etc/apache2/conf-available/security.conf] at time 12:23:08.299320
2018-10-03 12:23:08,299 [salt.state       :1803][INFO    ][3202] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-03 12:23:08,344 [salt.state       :290 ][INFO    ][3202] File /etc/apache2/conf-available/security.conf is in the correct state
2018-10-03 12:23:08,344 [salt.state       :1941][INFO    ][3202] Completed state [/etc/apache2/conf-available/security.conf] at time 12:23:08.344164 duration_in_ms=44.844
2018-10-03 12:23:08,348 [salt.state       :1770][INFO    ][3202] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 12:23:08.348457
2018-10-03 12:23:08,348 [salt.state       :1803][INFO    ][3202] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-03 12:23:08,348 [salt.state       :290 ][INFO    ][3202] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-10-03 12:23:08,349 [salt.state       :1941][INFO    ][3202] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 12:23:08.349032 duration_in_ms=0.576
2018-10-03 12:23:08,349 [salt.state       :1770][INFO    ][3202] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 12:23:08.349323
2018-10-03 12:23:08,349 [salt.state       :1803][INFO    ][3202] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-03 12:23:08,503 [salt.state       :290 ][INFO    ][3202] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-10-03 12:23:08,504 [salt.state       :1941][INFO    ][3202] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 12:23:08.504098 duration_in_ms=154.776
2018-10-03 12:23:08,504 [salt.state       :1770][INFO    ][3202] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 12:23:08.504425
2018-10-03 12:23:08,504 [salt.state       :1803][INFO    ][3202] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-03 12:23:08,655 [salt.state       :290 ][INFO    ][3202] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-10-03 12:23:08,655 [salt.state       :1941][INFO    ][3202] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 12:23:08.655265 duration_in_ms=150.84
2018-10-03 12:23:08,656 [salt.state       :1770][INFO    ][3202] Running state [apache2] at time 12:23:08.656626
2018-10-03 12:23:08,656 [salt.state       :1803][INFO    ][3202] Executing state service.running for [apache2]
2018-10-03 12:23:08,657 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-03 12:23:08,698 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 12:23:08,716 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 12:23:08,738 [salt.state       :290 ][INFO    ][3202] The service apache2 is already running
2018-10-03 12:23:08,739 [salt.state       :1941][INFO    ][3202] Completed state [apache2] at time 12:23:08.739434 duration_in_ms=82.808
2018-10-03 12:23:08,741 [salt.state       :1770][INFO    ][3202] Running state [/etc/apache2/conf-enabled/security.conf] at time 12:23:08.741148
2018-10-03 12:23:08,742 [salt.state       :1803][INFO    ][3202] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-03 12:23:08,745 [salt.state       :290 ][INFO    ][3202] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-10-03 12:23:08,746 [salt.state       :1941][INFO    ][3202] Completed state [/etc/apache2/conf-enabled/security.conf] at time 12:23:08.746243 duration_in_ms=5.095
2018-10-03 12:23:08,747 [salt.state       :1770][INFO    ][3202] Running state [panko-api] at time 12:23:08.747782
2018-10-03 12:23:08,748 [salt.state       :1803][INFO    ][3202] Executing state pkg.installed for [panko-api]
2018-10-03 12:23:08,766 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-10-03 12:23:08,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 12:23:10,679 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:23:10,711 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-10-03 12:23:17,196 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122317187796
2018-10-03 12:23:17,210 [salt.minion      :1431][INFO    ][3780] Starting a new job with PID 3780
2018-10-03 12:23:17,226 [salt.minion      :1708][INFO    ][3780] Returning information for job: 20181003122317187796
2018-10-03 12:23:18,115 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:23:18,163 [salt.state       :290 ][INFO    ][3202] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-10-03 12:23:18,196 [salt.state       :905 ][INFO    ][3202] Loading fresh modules for state activity
2018-10-03 12:23:18,225 [salt.state       :1941][INFO    ][3202] Completed state [panko-api] at time 12:23:18.225667 duration_in_ms=9477.885
2018-10-03 12:23:18,228 [salt.state       :1770][INFO    ][3202] Running state [panko_ssl_mysql] at time 12:23:18.228192
2018-10-03 12:23:18,228 [salt.state       :1803][INFO    ][3202] Executing state test.show_notification for [panko_ssl_mysql]
2018-10-03 12:23:18,228 [salt.state       :290 ][INFO    ][3202] Running panko._ssl.mysql
2018-10-03 12:23:18,229 [salt.state       :1941][INFO    ][3202] Completed state [panko_ssl_mysql] at time 12:23:18.229163 duration_in_ms=0.972
2018-10-03 12:23:18,230 [salt.state       :1770][INFO    ][3202] Running state [/etc/panko/panko.conf] at time 12:23:18.230846
2018-10-03 12:23:18,231 [salt.state       :1803][INFO    ][3202] Executing state file.managed for [/etc/panko/panko.conf]
2018-10-03 12:23:18,255 [salt.fileclient  :1215][INFO    ][3202] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-10-03 12:23:18,318 [salt.fileclient  :1215][INFO    ][3202] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-10-03 12:23:18,347 [salt.fileclient  :1215][INFO    ][3202] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-10-03 12:23:18,434 [salt.state       :290 ][INFO    ][3202] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@10.167.4.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -466,110 +481,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-10-03 12:23:18,460 [salt.state       :1941][INFO    ][3202] Completed state [/etc/panko/panko.conf] at time 12:23:18.460220 duration_in_ms=229.374
2018-10-03 12:23:18,462 [salt.state       :1770][INFO    ][3202] Running state [/usr/bin/panko-expirer --use-syslog] at time 12:23:18.462917
2018-10-03 12:23:18,463 [salt.state       :1803][INFO    ][3202] Executing state cron.present for [/usr/bin/panko-expirer --use-syslog]
2018-10-03 12:23:18,469 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command 'crontab -u panko -l' in directory '/root'
2018-10-03 12:23:18,499 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][3202] Command '['crontab', '-u', 'panko', '-l']' failed with return code: 1
2018-10-03 12:23:18,499 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][3202] stderr: no crontab for panko

2018-10-03 12:23:18,500 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][3202] retcode: 1
2018-10-03 12:23:18,501 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command 'crontab -u panko /tmp/__salt.tmp.mOqleX' in directory '/root'
2018-10-03 12:23:18,626 [salt.state       :290 ][INFO    ][3202] {'panko': '/usr/bin/panko-expirer --use-syslog'}
2018-10-03 12:23:18,627 [salt.state       :1941][INFO    ][3202] Completed state [/usr/bin/panko-expirer --use-syslog] at time 12:23:18.627469 duration_in_ms=164.552
2018-10-03 12:23:18,629 [salt.state       :1770][INFO    ][3202] Running state [panko-dbsync] at time 12:23:18.629493
2018-10-03 12:23:18,629 [salt.state       :1803][INFO    ][3202] Executing state cmd.run for [panko-dbsync]
2018-10-03 12:23:18,630 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command 'panko-dbsync' in directory '/root'
2018-10-03 12:23:21,962 [salt.state       :290 ][INFO    ][3202] {'pid': 3838, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-03 12:23:21,962 [salt.state       :1941][INFO    ][3202] Completed state [panko-dbsync] at time 12:23:21.962745 duration_in_ms=3333.251
2018-10-03 12:23:21,967 [salt.state       :1770][INFO    ][3202] Running state [wsgi_panko] at time 12:23:21.967773
2018-10-03 12:23:21,968 [salt.state       :1803][INFO    ][3202] Executing state apache_site.enabled for [wsgi_panko]
2018-10-03 12:23:21,968 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-10-03 12:23:22,019 [salt.state       :290 ][INFO    ][3202] {'new': 'wsgi_panko', 'old': None}
2018-10-03 12:23:22,019 [salt.state       :1941][INFO    ][3202] Completed state [wsgi_panko] at time 12:23:22.019915 duration_in_ms=52.141
2018-10-03 12:23:22,388 [salt.state       :1770][INFO    ][3202] Running state [apache2] at time 12:23:22.388045
2018-10-03 12:23:22,388 [salt.state       :1803][INFO    ][3202] Executing state service.running for [apache2]
2018-10-03 12:23:22,389 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 12:23:22,409 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 12:23:22,427 [salt.state       :290 ][INFO    ][3202] The service apache2 is already running
2018-10-03 12:23:22,428 [salt.state       :1941][INFO    ][3202] Completed state [apache2] at time 12:23:22.428130 duration_in_ms=40.066
2018-10-03 12:23:22,428 [salt.state       :1770][INFO    ][3202] Running state [apache2] at time 12:23:22.428610
2018-10-03 12:23:22,429 [salt.state       :1803][INFO    ][3202] Executing state service.mod_watch for [apache2]
2018-10-03 12:23:22,430 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 12:23:22,442 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3202] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-03 12:23:24,696 [salt.state       :290 ][INFO    ][3202] {'apache2': True}
2018-10-03 12:23:24,697 [salt.state       :1941][INFO    ][3202] Completed state [apache2] at time 12:23:24.697423 duration_in_ms=2268.811
2018-10-03 12:23:24,703 [salt.minion      :1708][INFO    ][3202] Returning information for job: 20181003122302004143
2018-10-03 12:24:00,712 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command test.ping with jid 20181003122400705831
2018-10-03 12:24:00,734 [salt.minion      :1431][INFO    ][3993] Starting a new job with PID 3993
2018-10-03 12:24:00,752 [salt.minion      :1708][INFO    ][3993] Returning information for job: 20181003122400705831
2018-10-03 12:24:00,881 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command state.sls with jid 20181003122400873536
2018-10-03 12:24:00,905 [salt.minion      :1431][INFO    ][3998] Starting a new job with PID 3998
2018-10-03 12:24:04,919 [salt.state       :905 ][INFO    ][3998] Loading fresh modules for state activity
2018-10-03 12:24:04,964 [salt.fileclient  :1215][INFO    ][3998] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-10-03 12:24:04,995 [salt.fileclient  :1215][INFO    ][3998] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-10-03 12:24:05,114 [salt.fileclient  :1215][INFO    ][3998] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-10-03 12:24:05,159 [salt.fileclient  :1215][INFO    ][3998] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-10-03 12:24:05,937 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122405928792
2018-10-03 12:24:05,950 [salt.minion      :1431][INFO    ][4014] Starting a new job with PID 4014
2018-10-03 12:24:05,965 [salt.minion      :1708][INFO    ][4014] Returning information for job: 20181003122405928792
2018-10-03 12:24:06,400 [salt.state       :1770][INFO    ][3998] Running state [aodh-api] at time 12:24:06.400113
2018-10-03 12:24:06,400 [salt.state       :1803][INFO    ][3998] Executing state pkg.installed for [aodh-api]
2018-10-03 12:24:06,401 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:24:06,773 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-10-03 12:24:06,904 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 12:24:08,550 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:24:08,576 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-10-03 12:24:16,077 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122416064014
2018-10-03 12:24:16,093 [salt.minion      :1431][INFO    ][4519] Starting a new job with PID 4519
2018-10-03 12:24:16,114 [salt.minion      :1708][INFO    ][4519] Returning information for job: 20181003122416064014
2018-10-03 12:24:26,225 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122426216702
2018-10-03 12:24:26,239 [salt.minion      :1431][INFO    ][4687] Starting a new job with PID 4687
2018-10-03 12:24:26,257 [salt.minion      :1708][INFO    ][4687] Returning information for job: 20181003122426216702
2018-10-03 12:24:36,368 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122436360421
2018-10-03 12:24:36,387 [salt.minion      :1431][INFO    ][9480] Starting a new job with PID 9480
2018-10-03 12:24:36,405 [salt.minion      :1708][INFO    ][9480] Returning information for job: 20181003122436360421
2018-10-03 12:24:43,784 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:24:43,833 [salt.state       :290 ][INFO    ][3998] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'c++-compiler' changed from 'absent' to '1'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-137.163'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev' changed from 'absent' to '1'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-10-03 12:24:43,855 [salt.state       :905 ][INFO    ][3998] Loading fresh modules for state activity
2018-10-03 12:24:43,985 [salt.state       :1941][INFO    ][3998] Completed state [aodh-api] at time 12:24:43.985022 duration_in_ms=37584.91
2018-10-03 12:24:43,989 [salt.state       :1770][INFO    ][3998] Running state [aodh-evaluator] at time 12:24:43.989251
2018-10-03 12:24:43,989 [salt.state       :1803][INFO    ][3998] Executing state pkg.installed for [aodh-evaluator]
2018-10-03 12:24:44,464 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:24:44,504 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-10-03 12:24:46,515 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122446505638
2018-10-03 12:24:46,538 [salt.minion      :1431][INFO    ][9702] Starting a new job with PID 9702
2018-10-03 12:24:46,561 [salt.minion      :1708][INFO    ][9702] Returning information for job: 20181003122446505638
2018-10-03 12:24:49,565 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:24:49,637 [salt.state       :290 ][INFO    ][3998] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-03 12:24:49,668 [salt.state       :905 ][INFO    ][3998] Loading fresh modules for state activity
2018-10-03 12:24:49,703 [salt.state       :1941][INFO    ][3998] Completed state [aodh-evaluator] at time 12:24:49.703167 duration_in_ms=5713.914
2018-10-03 12:24:49,711 [salt.state       :1770][INFO    ][3998] Running state [aodh-notifier] at time 12:24:49.711619
2018-10-03 12:24:49,712 [salt.state       :1803][INFO    ][3998] Executing state pkg.installed for [aodh-notifier]
2018-10-03 12:24:50,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:24:50,513 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-10-03 12:24:56,238 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:24:56,292 [salt.state       :290 ][INFO    ][3998] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-03 12:24:56,314 [salt.state       :905 ][INFO    ][3998] Loading fresh modules for state activity
2018-10-03 12:24:56,340 [salt.state       :1941][INFO    ][3998] Completed state [aodh-notifier] at time 12:24:56.340907 duration_in_ms=6629.299
2018-10-03 12:24:56,345 [salt.state       :1770][INFO    ][3998] Running state [aodh-listener] at time 12:24:56.345391
2018-10-03 12:24:56,345 [salt.state       :1803][INFO    ][3998] Executing state pkg.installed for [aodh-listener]
2018-10-03 12:24:56,813 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122456663796
2018-10-03 12:24:56,832 [salt.minion      :1431][INFO    ][10232] Starting a new job with PID 10232
2018-10-03 12:24:56,887 [salt.minion      :1708][INFO    ][10232] Returning information for job: 20181003122456663796
2018-10-03 12:24:57,026 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:24:57,059 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-10-03 12:25:00,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:25:00,990 [salt.state       :290 ][INFO    ][3998] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-03 12:25:01,010 [salt.state       :905 ][INFO    ][3998] Loading fresh modules for state activity
2018-10-03 12:25:01,041 [salt.state       :1941][INFO    ][3998] Completed state [aodh-listener] at time 12:25:01.041089 duration_in_ms=4695.695
2018-10-03 12:25:01,049 [salt.state       :1770][INFO    ][3998] Running state [python-aodhclient] at time 12:25:01.049500
2018-10-03 12:25:01,050 [salt.state       :1803][INFO    ][3998] Executing state pkg.installed for [python-aodhclient]
2018-10-03 12:25:01,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:25:01,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-10-03 12:25:04,277 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:25:04,323 [salt.state       :290 ][INFO    ][3998] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-10-03 12:25:04,344 [salt.state       :905 ][INFO    ][3998] Loading fresh modules for state activity
2018-10-03 12:25:04,370 [salt.state       :1941][INFO    ][3998] Completed state [python-aodhclient] at time 12:25:04.370089 duration_in_ms=3320.586
2018-10-03 12:25:04,375 [salt.state       :1770][INFO    ][3998] Running state [aodh_ssl_mysql] at time 12:25:04.375635
2018-10-03 12:25:04,376 [salt.state       :1803][INFO    ][3998] Executing state test.show_notification for [aodh_ssl_mysql]
2018-10-03 12:25:04,377 [salt.state       :290 ][INFO    ][3998] Running aodh._ssl.mysql
2018-10-03 12:25:04,378 [salt.state       :1941][INFO    ][3998] Completed state [aodh_ssl_mysql] at time 12:25:04.378362 duration_in_ms=2.727
2018-10-03 12:25:04,379 [salt.state       :1770][INFO    ][3998] Running state [aodh_ssl_rabbitmq] at time 12:25:04.379537
2018-10-03 12:25:04,380 [salt.state       :1803][INFO    ][3998] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-10-03 12:25:04,380 [salt.state       :290 ][INFO    ][3998] Running aodh._ssl.rabbitmq
2018-10-03 12:25:04,380 [salt.state       :1941][INFO    ][3998] Completed state [aodh_ssl_rabbitmq] at time 12:25:04.380665 duration_in_ms=1.129
2018-10-03 12:25:04,383 [salt.state       :1770][INFO    ][3998] Running state [/etc/aodh/aodh.conf] at time 12:25:04.383069
2018-10-03 12:25:04,383 [salt.state       :1803][INFO    ][3998] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-10-03 12:25:04,420 [salt.fileclient  :1215][INFO    ][3998] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-10-03 12:25:04,473 [salt.fileclient  :1215][INFO    ][3998] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-10-03 12:25:04,565 [salt.fileclient  :1215][INFO    ][3998] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-10-03 12:25:04,581 [salt.fileclient  :1215][INFO    ][3998] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-10-03 12:25:04,611 [salt.state       :290 ][INFO    ][3998] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 10.167.4.32
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@10.167.4.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,291 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +862,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +878,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +916,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -775,995 +1034,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-10-03 12:25:04,616 [salt.state       :1941][INFO    ][3998] Completed state [/etc/aodh/aodh.conf] at time 12:25:04.616875 duration_in_ms=233.805
2018-10-03 12:25:04,617 [salt.state       :1770][INFO    ][3998] Running state [/etc/default/aodh-evaluator] at time 12:25:04.617279
2018-10-03 12:25:04,617 [salt.state       :1803][INFO    ][3998] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-10-03 12:25:04,634 [salt.fileclient  :1215][INFO    ][3998] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-10-03 12:25:04,640 [salt.state       :290 ][INFO    ][3998] File changed:
New file
2018-10-03 12:25:04,640 [salt.state       :1941][INFO    ][3998] Completed state [/etc/default/aodh-evaluator] at time 12:25:04.640663 duration_in_ms=23.385
2018-10-03 12:25:04,640 [salt.state       :1770][INFO    ][3998] Running state [/etc/default/aodh-notifier] at time 12:25:04.640941
2018-10-03 12:25:04,641 [salt.state       :1803][INFO    ][3998] Executing state file.managed for [/etc/default/aodh-notifier]
2018-10-03 12:25:04,658 [salt.state       :290 ][INFO    ][3998] File changed:
New file
2018-10-03 12:25:04,658 [salt.state       :1941][INFO    ][3998] Completed state [/etc/default/aodh-notifier] at time 12:25:04.658495 duration_in_ms=17.555
2018-10-03 12:25:04,658 [salt.state       :1770][INFO    ][3998] Running state [/etc/default/aodh-listener] at time 12:25:04.658761
2018-10-03 12:25:04,658 [salt.state       :1803][INFO    ][3998] Executing state file.managed for [/etc/default/aodh-listener]
2018-10-03 12:25:04,673 [salt.state       :290 ][INFO    ][3998] File changed:
New file
2018-10-03 12:25:04,673 [salt.state       :1941][INFO    ][3998] Completed state [/etc/default/aodh-listener] at time 12:25:04.673570 duration_in_ms=14.808
2018-10-03 12:25:04,674 [salt.state       :1770][INFO    ][3998] Running state [aodh-dbsync] at time 12:25:04.674538
2018-10-03 12:25:04,674 [salt.state       :1803][INFO    ][3998] Executing state cmd.run for [aodh-dbsync]
2018-10-03 12:25:04,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command 'aodh-dbsync' in directory '/root'
2018-10-03 12:25:06,819 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122506808751
2018-10-03 12:25:06,839 [salt.minion      :1431][INFO    ][10675] Starting a new job with PID 10675
2018-10-03 12:25:06,856 [salt.minion      :1708][INFO    ][10675] Returning information for job: 20181003122506808751
2018-10-03 12:25:07,487 [salt.state       :290 ][INFO    ][3998] {'pid': 10663, 'retcode': 0, 'stderr': '', 'stdout': '2018-10-03 12:25:06.122 10664 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-10-03 12:25:06.123 10664 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-10-03 12:25:07,488 [salt.state       :1941][INFO    ][3998] Completed state [aodh-dbsync] at time 12:25:07.488583 duration_in_ms=2814.044
2018-10-03 12:25:07,500 [salt.state       :1770][INFO    ][3998] Running state [/usr/bin/aodh-expirer] at time 12:25:07.500008
2018-10-03 12:25:07,500 [salt.state       :1803][INFO    ][3998] Executing state cron.present for [/usr/bin/aodh-expirer]
2018-10-03 12:25:07,500 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command 'crontab -u aodh -l' in directory '/root'
2018-10-03 12:25:07,515 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][3998] Command '['crontab', '-u', 'aodh', '-l']' failed with return code: 1
2018-10-03 12:25:07,516 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][3998] stderr: no crontab for aodh

2018-10-03 12:25:07,516 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][3998] retcode: 1
2018-10-03 12:25:07,517 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command 'crontab -u aodh /tmp/__salt.tmp.fb82ff' in directory '/root'
2018-10-03 12:25:07,583 [salt.state       :290 ][INFO    ][3998] {'aodh': '/usr/bin/aodh-expirer'}
2018-10-03 12:25:07,584 [salt.state       :1941][INFO    ][3998] Completed state [/usr/bin/aodh-expirer] at time 12:25:07.584360 duration_in_ms=84.351
2018-10-03 12:25:07,586 [salt.state       :1770][INFO    ][3998] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 12:25:07.585966
2018-10-03 12:25:07,586 [salt.state       :1803][INFO    ][3998] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-10-03 12:25:07,609 [salt.fileclient  :1215][INFO    ][3998] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-10-03 12:25:07,638 [salt.state       :290 ][INFO    ][3998] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 10.167.4.32:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-10-03 12:25:07,638 [salt.state       :1941][INFO    ][3998] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 12:25:07.638743 duration_in_ms=52.778
2018-10-03 12:25:07,639 [salt.state       :1770][INFO    ][3998] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 12:25:07.638971
2018-10-03 12:25:07,639 [salt.state       :1803][INFO    ][3998] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-10-03 12:25:07,646 [salt.state       :290 ][INFO    ][3998] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-10-03 12:25:07,646 [salt.state       :1941][INFO    ][3998] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 12:25:07.646399 duration_in_ms=7.427
2018-10-03 12:25:08,046 [salt.state       :1770][INFO    ][3998] Running state [apache2] at time 12:25:08.045951
2018-10-03 12:25:08,046 [salt.state       :1803][INFO    ][3998] Executing state service.running for [apache2]
2018-10-03 12:25:08,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-03 12:25:08,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 12:25:08,084 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-03 12:25:08,099 [salt.state       :290 ][INFO    ][3998] The service apache2 is already running
2018-10-03 12:25:08,100 [salt.state       :1941][INFO    ][3998] Completed state [apache2] at time 12:25:08.099950 duration_in_ms=53.999
2018-10-03 12:25:08,100 [salt.state       :1770][INFO    ][3998] Running state [apache2] at time 12:25:08.100728
2018-10-03 12:25:08,101 [salt.state       :1803][INFO    ][3998] Executing state service.mod_watch for [apache2]
2018-10-03 12:25:08,103 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-03 12:25:08,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-03 12:25:10,555 [salt.state       :290 ][INFO    ][3998] {'apache2': True}
2018-10-03 12:25:10,555 [salt.state       :1941][INFO    ][3998] Completed state [apache2] at time 12:25:10.555600 duration_in_ms=2454.872
2018-10-03 12:25:10,557 [salt.state       :1770][INFO    ][3998] Running state [aodh-evaluator] at time 12:25:10.557798
2018-10-03 12:25:10,559 [salt.state       :1803][INFO    ][3998] Executing state service.running for [aodh-evaluator]
2018-10-03 12:25:10,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-10-03 12:25:10,575 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-03 12:25:10,588 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-10-03 12:25:10,605 [salt.state       :290 ][INFO    ][3998] The service aodh-evaluator is already running
2018-10-03 12:25:10,605 [salt.state       :1941][INFO    ][3998] Completed state [aodh-evaluator] at time 12:25:10.605427 duration_in_ms=47.63
2018-10-03 12:25:10,605 [salt.state       :1770][INFO    ][3998] Running state [aodh-evaluator] at time 12:25:10.605675
2018-10-03 12:25:10,606 [salt.state       :1803][INFO    ][3998] Executing state service.mod_watch for [aodh-evaluator]
2018-10-03 12:25:10,606 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-03 12:25:10,623 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-10-03 12:25:10,786 [salt.state       :290 ][INFO    ][3998] {'aodh-evaluator': True}
2018-10-03 12:25:10,786 [salt.state       :1941][INFO    ][3998] Completed state [aodh-evaluator] at time 12:25:10.786680 duration_in_ms=181.005
2018-10-03 12:25:10,787 [salt.state       :1770][INFO    ][3998] Running state [aodh-notifier] at time 12:25:10.787438
2018-10-03 12:25:10,792 [salt.state       :1803][INFO    ][3998] Executing state service.running for [aodh-notifier]
2018-10-03 12:25:10,793 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-10-03 12:25:10,829 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-03 12:25:10,851 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-10-03 12:25:10,875 [salt.state       :290 ][INFO    ][3998] The service aodh-notifier is already running
2018-10-03 12:25:10,876 [salt.state       :1941][INFO    ][3998] Completed state [aodh-notifier] at time 12:25:10.876245 duration_in_ms=88.806
2018-10-03 12:25:10,876 [salt.state       :1770][INFO    ][3998] Running state [aodh-notifier] at time 12:25:10.876606
2018-10-03 12:25:10,880 [salt.state       :1803][INFO    ][3998] Executing state service.mod_watch for [aodh-notifier]
2018-10-03 12:25:10,881 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-03 12:25:10,894 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-10-03 12:25:16,967 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122516957406
2018-10-03 12:25:16,988 [salt.minion      :1431][INFO    ][10946] Starting a new job with PID 10946
2018-10-03 12:25:17,006 [salt.minion      :1708][INFO    ][10946] Returning information for job: 20181003122516957406
2018-10-03 12:25:26,086 [salt.state       :290 ][INFO    ][3998] {'aodh-notifier': True}
2018-10-03 12:25:26,087 [salt.state       :1941][INFO    ][3998] Completed state [aodh-notifier] at time 12:25:26.086927 duration_in_ms=15210.32
2018-10-03 12:25:26,088 [salt.state       :1770][INFO    ][3998] Running state [aodh-listener] at time 12:25:26.088033
2018-10-03 12:25:26,089 [salt.state       :1803][INFO    ][3998] Executing state service.running for [aodh-listener]
2018-10-03 12:25:26,090 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-10-03 12:25:26,123 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-03 12:25:26,140 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-10-03 12:25:26,154 [salt.state       :290 ][INFO    ][3998] The service aodh-listener is already running
2018-10-03 12:25:26,154 [salt.state       :1941][INFO    ][3998] Completed state [aodh-listener] at time 12:25:26.154667 duration_in_ms=66.632
2018-10-03 12:25:26,154 [salt.state       :1770][INFO    ][3998] Running state [aodh-listener] at time 12:25:26.154923
2018-10-03 12:25:26,155 [salt.state       :1803][INFO    ][3998] Executing state service.mod_watch for [aodh-listener]
2018-10-03 12:25:26,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-03 12:25:26,168 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3998] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-10-03 12:25:27,119 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122527111067
2018-10-03 12:25:27,139 [salt.minion      :1431][INFO    ][11013] Starting a new job with PID 11013
2018-10-03 12:25:27,156 [salt.minion      :1708][INFO    ][11013] Returning information for job: 20181003122527111067
2018-10-03 12:25:37,270 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122537260905
2018-10-03 12:25:37,292 [salt.minion      :1431][INFO    ][11023] Starting a new job with PID 11023
2018-10-03 12:25:37,311 [salt.minion      :1708][INFO    ][11023] Returning information for job: 20181003122537260905
2018-10-03 12:25:41,335 [salt.state       :290 ][INFO    ][3998] {'aodh-listener': True}
2018-10-03 12:25:41,335 [salt.state       :1941][INFO    ][3998] Completed state [aodh-listener] at time 12:25:41.335748 duration_in_ms=15180.823
2018-10-03 12:25:41,344 [salt.minion      :1708][INFO    ][3998] Returning information for job: 20181003122400873536
2018-10-03 12:28:48,402 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command state.sls with jid 20181003122848395379
2018-10-03 12:28:48,423 [salt.minion      :1431][INFO    ][11079] Starting a new job with PID 11079
2018-10-03 12:28:52,238 [salt.state       :905 ][INFO    ][11079] Loading fresh modules for state activity
2018-10-03 12:28:52,663 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-10-03 12:28:53,110 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-10-03 12:28:53,480 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122853470148
2018-10-03 12:28:53,502 [salt.minion      :1431][INFO    ][11091] Starting a new job with PID 11091
2018-10-03 12:28:53,518 [salt.minion      :1708][INFO    ][11091] Returning information for job: 20181003122853470148
2018-10-03 12:28:54,954 [salt.state       :1770][INFO    ][11079] Running state [ceilometer-agent-central] at time 12:28:54.953947
2018-10-03 12:28:54,954 [salt.state       :1803][INFO    ][11079] Executing state pkg.installed for [ceilometer-agent-central]
2018-10-03 12:28:54,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:28:55,439 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-10-03 12:28:55,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-03 12:28:57,318 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:28:57,349 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-10-03 12:29:03,683 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122903674905
2018-10-03 12:29:03,708 [salt.minion      :1431][INFO    ][11540] Starting a new job with PID 11540
2018-10-03 12:29:03,734 [salt.minion      :1708][INFO    ][11540] Returning information for job: 20181003122903674905
2018-10-03 12:29:13,894 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122913884381
2018-10-03 12:29:13,917 [salt.minion      :1431][INFO    ][11775] Starting a new job with PID 11775
2018-10-03 12:29:13,934 [salt.minion      :1708][INFO    ][11775] Returning information for job: 20181003122913884381
2018-10-03 12:29:23,912 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122923903772
2018-10-03 12:29:23,930 [salt.minion      :1431][INFO    ][12005] Starting a new job with PID 12005
2018-10-03 12:29:23,946 [salt.minion      :1708][INFO    ][12005] Returning information for job: 20181003122923903772
2018-10-03 12:29:34,139 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122934130672
2018-10-03 12:29:34,159 [salt.minion      :1431][INFO    ][12204] Starting a new job with PID 12204
2018-10-03 12:29:34,177 [salt.minion      :1708][INFO    ][12204] Returning information for job: 20181003122934130672
2018-10-03 12:29:44,183 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122944175183
2018-10-03 12:29:44,205 [salt.minion      :1431][INFO    ][13356] Starting a new job with PID 13356
2018-10-03 12:29:44,222 [salt.minion      :1708][INFO    ][13356] Returning information for job: 20181003122944175183
2018-10-03 12:29:51,943 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:29:51,996 [salt.state       :290 ][INFO    ][11079] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'ibverbs-providers' changed from 'absent' to '17.1-1~cloud0'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmthca1' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0ubuntu2.1~cloud0'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libipathverbs1' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libmlx4-1' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libmlx5-1' changed from 'absent' to '1'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '17.1-1~cloud0'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libnes1' changed from 'absent' to '1'
'librados2' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'libcxgb3-1' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'librdmacm1' changed from 'absent' to '17.1-1~cloud0'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-10-03 12:29:52,031 [salt.state       :905 ][INFO    ][11079] Loading fresh modules for state activity
2018-10-03 12:29:52,160 [salt.state       :1941][INFO    ][11079] Completed state [ceilometer-agent-central] at time 12:29:52.160403 duration_in_ms=57206.457
2018-10-03 12:29:52,165 [salt.state       :1770][INFO    ][11079] Running state [python-ceilometerclient] at time 12:29:52.165337
2018-10-03 12:29:52,165 [salt.state       :1803][INFO    ][11079] Executing state pkg.installed for [python-ceilometerclient]
2018-10-03 12:29:52,701 [salt.state       :290 ][INFO    ][11079] All specified packages are already installed
2018-10-03 12:29:52,701 [salt.state       :1941][INFO    ][11079] Completed state [python-ceilometerclient] at time 12:29:52.701825 duration_in_ms=536.487
2018-10-03 12:29:52,702 [salt.state       :1770][INFO    ][11079] Running state [ceilometer-agent-notification] at time 12:29:52.702135
2018-10-03 12:29:52,702 [salt.state       :1803][INFO    ][11079] Executing state pkg.installed for [ceilometer-agent-notification]
2018-10-03 12:29:52,717 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-03 12:29:52,750 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-10-03 12:29:54,404 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003122954397394
2018-10-03 12:29:54,424 [salt.minion      :1431][INFO    ][13699] Starting a new job with PID 13699
2018-10-03 12:29:54,450 [salt.minion      :1708][INFO    ][13699] Returning information for job: 20181003122954397394
2018-10-03 12:29:56,857 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-03 12:29:56,898 [salt.state       :290 ][INFO    ][11079] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-10-03 12:29:56,916 [salt.state       :905 ][INFO    ][11079] Loading fresh modules for state activity
2018-10-03 12:29:56,939 [salt.state       :1941][INFO    ][11079] Completed state [ceilometer-agent-notification] at time 12:29:56.939441 duration_in_ms=4237.305
2018-10-03 12:29:56,943 [salt.state       :1770][INFO    ][11079] Running state [/etc/ceilometer/ceilometer.conf] at time 12:29:56.942972
2018-10-03 12:29:56,943 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-10-03 12:29:56,969 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-10-03 12:29:57,113 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-10-03 12:29:57,126 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-10-03 12:29:57,141 [salt.state       :290 ][INFO    ][11079] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-10-03 12:29:57,148 [salt.state       :1941][INFO    ][11079] Completed state [/etc/ceilometer/ceilometer.conf] at time 12:29:57.148451 duration_in_ms=205.478
2018-10-03 12:29:57,149 [salt.state       :1770][INFO    ][11079] Running state [/etc/default/ceilometer-agent-central] at time 12:29:57.149220
2018-10-03 12:29:57,149 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-10-03 12:29:57,167 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-10-03 12:29:57,173 [salt.state       :290 ][INFO    ][11079] File changed:
New file
2018-10-03 12:29:57,173 [salt.state       :1941][INFO    ][11079] Completed state [/etc/default/ceilometer-agent-central] at time 12:29:57.173192 duration_in_ms=23.973
2018-10-03 12:29:57,173 [salt.state       :1770][INFO    ][11079] Running state [/etc/default/ceilometer-agent-notification] at time 12:29:57.173466
2018-10-03 12:29:57,173 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-10-03 12:29:57,189 [salt.state       :290 ][INFO    ][11079] File changed:
New file
2018-10-03 12:29:57,189 [salt.state       :1941][INFO    ][11079] Completed state [/etc/default/ceilometer-agent-notification] at time 12:29:57.189259 duration_in_ms=15.793
2018-10-03 12:29:57,191 [salt.state       :1770][INFO    ][11079] Running state [python-gnocchiclient] at time 12:29:57.191762
2018-10-03 12:29:57,191 [salt.state       :1803][INFO    ][11079] Executing state pkg.latest for [python-gnocchiclient]
2018-10-03 12:29:57,208 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-10-03 12:29:57,617 [salt.state       :290 ][INFO    ][11079] Package python-gnocchiclient is already up-to-date
2018-10-03 12:29:57,618 [salt.state       :1941][INFO    ][11079] Completed state [python-gnocchiclient] at time 12:29:57.618038 duration_in_ms=426.276
2018-10-03 12:29:57,618 [salt.state       :1770][INFO    ][11079] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 12:29:57.618790
2018-10-03 12:29:57,619 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2018-10-03 12:29:57,646 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gnocchi_resources.yaml'
2018-10-03 12:29:57,658 [salt.state       :290 ][INFO    ][11079] File changed:
New file
2018-10-03 12:29:57,659 [salt.state       :1941][INFO    ][11079] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 12:29:57.659126 duration_in_ms=40.336
2018-10-03 12:29:57,681 [salt.state       :1770][INFO    ][11079] Running state [ceilometer-upgrade] at time 12:29:57.681507
2018-10-03 12:29:57,681 [salt.state       :1803][INFO    ][11079] Executing state cmd.run for [ceilometer-upgrade]
2018-10-03 12:29:57,682 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command 'ceilometer-upgrade' in directory '/root'
2018-10-03 12:30:04,478 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003123004470899
2018-10-03 12:30:04,501 [salt.minion      :1431][INFO    ][13947] Starting a new job with PID 13947
2018-10-03 12:30:04,522 [salt.minion      :1708][INFO    ][13947] Returning information for job: 20181003123004470899
2018-10-03 12:30:14,685 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003123014677020
2018-10-03 12:30:14,707 [salt.minion      :1431][INFO    ][13953] Starting a new job with PID 13953
2018-10-03 12:30:14,727 [salt.minion      :1708][INFO    ][13953] Returning information for job: 20181003123014677020
2018-10-03 12:30:24,896 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command saltutil.find_job with jid 20181003123024888034
2018-10-03 12:30:24,918 [salt.minion      :1431][INFO    ][13958] Starting a new job with PID 13958
2018-10-03 12:30:24,936 [salt.minion      :1708][INFO    ][13958] Returning information for job: 20181003123024888034
2018-10-03 12:30:30,067 [salt.state       :290 ][INFO    ][11079] {'pid': 13935, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-03 12:30:30,068 [salt.state       :1941][INFO    ][11079] Completed state [ceilometer-upgrade] at time 12:30:30.068484 duration_in_ms=32386.977
2018-10-03 12:30:30,069 [salt.state       :1770][INFO    ][11079] Running state [/etc/ceilometer/pipeline.yaml] at time 12:30:30.069363
2018-10-03 12:30:30,069 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-10-03 12:30:30,091 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-10-03 12:30:30,142 [salt.state       :290 ][INFO    ][11079] File changed:
New file
2018-10-03 12:30:30,143 [salt.state       :1941][INFO    ][11079] Completed state [/etc/ceilometer/pipeline.yaml] at time 12:30:30.142969 duration_in_ms=73.606
2018-10-03 12:30:30,143 [salt.state       :1770][INFO    ][11079] Running state [/etc/ceilometer/event_pipeline.yaml] at time 12:30:30.143462
2018-10-03 12:30:30,143 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-10-03 12:30:30,160 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-10-03 12:30:30,204 [salt.state       :290 ][INFO    ][11079] File changed:
New file
2018-10-03 12:30:30,204 [salt.state       :1941][INFO    ][11079] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 12:30:30.204759 duration_in_ms=61.297
2018-10-03 12:30:30,205 [salt.state       :1770][INFO    ][11079] Running state [/etc/ceilometer/event_definitions.yaml] at time 12:30:30.205253
2018-10-03 12:30:30,205 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-10-03 12:30:30,223 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-10-03 12:30:30,235 [salt.state       :290 ][INFO    ][11079] File changed:
New file
2018-10-03 12:30:30,236 [salt.state       :1941][INFO    ][11079] Completed state [/etc/ceilometer/event_definitions.yaml] at time 12:30:30.235946 duration_in_ms=30.693
2018-10-03 12:30:30,236 [salt.state       :1770][INFO    ][11079] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 12:30:30.236608
2018-10-03 12:30:30,237 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-10-03 12:30:30,254 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-10-03 12:30:30,263 [salt.state       :290 ][INFO    ][11079] File changed:
New file
2018-10-03 12:30:30,264 [salt.state       :1941][INFO    ][11079] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 12:30:30.264345 duration_in_ms=27.737
2018-10-03 12:30:30,676 [salt.state       :1770][INFO    ][11079] Running state [ceilometer-agent-central] at time 12:30:30.676208
2018-10-03 12:30:30,676 [salt.state       :1803][INFO    ][11079] Executing state service.running for [ceilometer-agent-central]
2018-10-03 12:30:30,677 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-10-03 12:30:30,701 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-03 12:30:30,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-03 12:30:30,734 [salt.state       :290 ][INFO    ][11079] The service ceilometer-agent-central is already running
2018-10-03 12:30:30,735 [salt.state       :1941][INFO    ][11079] Completed state [ceilometer-agent-central] at time 12:30:30.735387 duration_in_ms=59.179
2018-10-03 12:30:30,736 [salt.state       :1770][INFO    ][11079] Running state [ceilometer-agent-central] at time 12:30:30.736270
2018-10-03 12:30:30,737 [salt.state       :1803][INFO    ][11079] Executing state service.mod_watch for [ceilometer-agent-central]
2018-10-03 12:30:30,739 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-03 12:30:30,754 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-03 12:30:30,943 [salt.state       :290 ][INFO    ][11079] {'ceilometer-agent-central': True}
2018-10-03 12:30:30,944 [salt.state       :1941][INFO    ][11079] Completed state [ceilometer-agent-central] at time 12:30:30.944395 duration_in_ms=208.126
2018-10-03 12:30:30,945 [salt.state       :1770][INFO    ][11079] Running state [ceilometer-agent-notification] at time 12:30:30.945291
2018-10-03 12:30:30,945 [salt.state       :1803][INFO    ][11079] Executing state service.running for [ceilometer-agent-notification]
2018-10-03 12:30:30,946 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-10-03 12:30:30,971 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-03 12:30:30,988 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-03 12:30:31,003 [salt.state       :290 ][INFO    ][11079] The service ceilometer-agent-notification is already running
2018-10-03 12:30:31,008 [salt.state       :1941][INFO    ][11079] Completed state [ceilometer-agent-notification] at time 12:30:31.004037 duration_in_ms=58.746
2018-10-03 12:30:31,008 [salt.state       :1770][INFO    ][11079] Running state [ceilometer-agent-notification] at time 12:30:31.008377
2018-10-03 12:30:31,008 [salt.state       :1803][INFO    ][11079] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-10-03 12:30:31,009 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-03 12:30:31,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-03 12:30:31,151 [salt.state       :290 ][INFO    ][11079] {'ceilometer-agent-notification': True}
2018-10-03 12:30:31,151 [salt.state       :1941][INFO    ][11079] Completed state [ceilometer-agent-notification] at time 12:30:31.151651 duration_in_ms=143.274
2018-10-03 12:30:31,157 [salt.minion      :1708][INFO    ][11079] Returning information for job: 20181003122848395379
2018-10-03 12:36:56,098 [salt.minion      :1307][INFO    ][3152] User sudo_ubuntu Executing command cp.push_dir with jid 20181003123656092753
2018-10-03 12:36:56,126 [salt.minion      :1431][INFO    ][14138] Starting a new job with PID 14138
