2018-10-02 06:26:58,985 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:26:59,498 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:26:59,501 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:26:59,502 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:26:59,504 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:00,766 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:00,770 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:00,775 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:00,997 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,002 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,007 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,013 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,444 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,527 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,532 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,537 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,541 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,546 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,550 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,554 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,559 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,563 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,567 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,571 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,576 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,580 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,584 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,587 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,591 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,595 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,599 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,602 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,606 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,609 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,613 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,616 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,620 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,623 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,626 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,629 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,632 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,635 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,637 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,640 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,643 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,646 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,648 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,651 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,654 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,657 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,659 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,662 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,665 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,667 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,670 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,673 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:01,675 [salt.utils.decorators:82  ][ERROR   ][1942] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-02 06:27:30,700 [salt.utils.decorators:613 ][WARNING ][1942] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-02 06:27:33,323 [salt.loaded.int.states.file:2150][WARNING ][1942] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-02 06:27:36,186 [salt.loaded.int.states.file:2150][WARNING ][1942] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-02 06:27:57,499 [salt.loaded.int.states.file:2150][WARNING ][1942] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-02 06:28:01,305 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3166] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-10-02 06:28:01,353 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3166] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-10-02 06:28:01,384 [salt.utils.parsers:1051][WARNING ][1604] Minion received a SIGTERM. Exiting.
2018-10-02 06:28:02,345 [salt.cli.daemons :293 ][INFO    ][3219] Setting up the Salt Minion "mdb03.mcp-odl-ha.local"
2018-10-02 06:28:02,476 [salt.cli.daemons :82  ][INFO    ][3219] Starting up the Salt Minion
2018-10-02 06:28:02,477 [salt.utils.event :1017][INFO    ][3219] Starting pull socket on /var/run/salt/minion/minion_event_4701d3a5d9_pull.ipc
2018-10-02 06:28:03,351 [salt.minion      :976 ][INFO    ][3219] Creating minion process manager
2018-10-02 06:28:04,696 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3219] Executing command ['date', '+%z'] in directory '/root'
2018-10-02 06:28:04,741 [salt.utils.schedule:568 ][INFO    ][3219] Updating job settings for scheduled job: __mine_interval
2018-10-02 06:28:04,745 [salt.minion      :1107][INFO    ][3219] Added mine.update to scheduler
2018-10-02 06:28:04,766 [salt.minion      :1965][INFO    ][3219] Minion is starting as user 'root'
2018-10-02 06:28:04,784 [salt.minion      :2324][INFO    ][3219] Minion is ready to receive requests!
2018-10-02 06:29:12,639 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command state.apply with jid 20181002062912628320
2018-10-02 06:29:12,684 [salt.minion      :1431][INFO    ][3310] Starting a new job with PID 3310
2018-10-02 06:29:17,736 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002062917726495
2018-10-02 06:29:17,774 [salt.minion      :1431][INFO    ][3317] Starting a new job with PID 3317
2018-10-02 06:29:17,802 [salt.minion      :1708][INFO    ][3317] Returning information for job: 20181002062917726495
2018-10-02 06:29:18,035 [salt.state       :905 ][INFO    ][3310] Loading fresh modules for state activity
2018-10-02 06:29:18,978 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-10-02 06:29:20,381 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-10-02 06:29:20,574 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-10-02 06:29:20,670 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-10-02 06:29:20,747 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-10-02 06:29:20,881 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-10-02 06:29:21,644 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-10-02 06:29:21,759 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-10-02 06:29:21,905 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-10-02 06:29:21,924 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-10-02 06:29:22,520 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-10-02 06:29:22,659 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-10-02 06:29:22,757 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-10-02 06:29:22,873 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-10-02 06:29:22,949 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-10-02 06:29:23,012 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-10-02 06:29:24,054 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-10-02 06:29:24,192 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-10-02 06:29:24,267 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-10-02 06:29:24,339 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-10-02 06:29:24,417 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-10-02 06:29:24,601 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-10-02 06:29:24,826 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-10-02 06:29:25,351 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-10-02 06:29:26,017 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-10-02 06:29:26,052 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-10-02 06:29:26,101 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-10-02 06:29:26,151 [salt.state       :1770][INFO    ][3310] Running state [/etc/environment] at time 06:29:26.151388
2018-10-02 06:29:26,151 [salt.state       :1803][INFO    ][3310] Executing state file.blockreplace for [/etc/environment]
2018-10-02 06:29:26,166 [salt.state       :290 ][INFO    ][3310] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-10-02 06:29:26,166 [salt.state       :1941][INFO    ][3310] Completed state [/etc/environment] at time 06:29:26.166434 duration_in_ms=15.046
2018-10-02 06:29:26,166 [salt.state       :1770][INFO    ][3310] Running state [/etc/profile.d] at time 06:29:26.166777
2018-10-02 06:29:26,167 [salt.state       :1803][INFO    ][3310] Executing state file.directory for [/etc/profile.d]
2018-10-02 06:29:26,172 [salt.state       :290 ][INFO    ][3310] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-10-02 06:29:26,172 [salt.state       :1941][INFO    ][3310] Completed state [/etc/profile.d] at time 06:29:26.172826 duration_in_ms=6.049
2018-10-02 06:29:26,881 [salt.state       :1770][INFO    ][3310] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 06:29:26.881161
2018-10-02 06:29:26,891 [salt.state       :1803][INFO    ][3310] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-10-02 06:29:27,504 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-10-02 06:29:27,529 [salt.state       :290 ][INFO    ][3310] File changed:
New file
2018-10-02 06:29:27,529 [salt.state       :1941][INFO    ][3310] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 06:29:27.529650 duration_in_ms=648.488
2018-10-02 06:29:27,530 [salt.state       :1770][INFO    ][3310] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 06:29:27.530167
2018-10-02 06:29:27,531 [salt.state       :1803][INFO    ][3310] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-10-02 06:29:27,897 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002062927884683
2018-10-02 06:29:27,920 [salt.minion      :1431][INFO    ][3393] Starting a new job with PID 3393
2018-10-02 06:29:27,958 [salt.minion      :1708][INFO    ][3393] Returning information for job: 20181002062927884683
2018-10-02 06:29:27,972 [salt.state       :290 ][INFO    ][3310] File changed:
New file
2018-10-02 06:29:27,973 [salt.state       :1941][INFO    ][3310] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 06:29:27.973038 duration_in_ms=442.87
2018-10-02 06:29:27,974 [salt.state       :1770][INFO    ][3310] Running state [linux_repo_prereq_pkgs] at time 06:29:27.974775
2018-10-02 06:29:27,975 [salt.state       :1803][INFO    ][3310] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-10-02 06:29:27,976 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 06:29:28,317 [salt.state       :290 ][INFO    ][3310] All specified packages are already installed
2018-10-02 06:29:28,318 [salt.state       :1941][INFO    ][3310] Completed state [linux_repo_prereq_pkgs] at time 06:29:28.318463 duration_in_ms=343.687
2018-10-02 06:29:28,318 [salt.state       :1770][INFO    ][3310] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 06:29:28.318947
2018-10-02 06:29:28,319 [salt.state       :1803][INFO    ][3310] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-10-02 06:29:28,320 [salt.state       :290 ][INFO    ][3310] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-10-02 06:29:28,320 [salt.state       :1941][INFO    ][3310] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 06:29:28.320329 duration_in_ms=1.382
2018-10-02 06:29:28,320 [salt.state       :1770][INFO    ][3310] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 06:29:28.320691
2018-10-02 06:29:28,321 [salt.state       :1803][INFO    ][3310] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-10-02 06:29:28,321 [salt.state       :290 ][INFO    ][3310] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-10-02 06:29:28,321 [salt.state       :1941][INFO    ][3310] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 06:29:28.321779 duration_in_ms=1.087
2018-10-02 06:29:28,322 [salt.state       :1770][INFO    ][3310] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 06:29:28.322167
2018-10-02 06:29:28,322 [salt.state       :1803][INFO    ][3310] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-10-02 06:29:28,345 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-10-02 06:29:28,474 [salt.state       :290 ][INFO    ][3310] File changed:
New file
2018-10-02 06:29:28,475 [salt.state       :1941][INFO    ][3310] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 06:29:28.475385 duration_in_ms=153.216
2018-10-02 06:29:28,478 [salt.state       :1770][INFO    ][3310] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 06:29:28.478509
2018-10-02 06:29:28,478 [salt.state       :1803][INFO    ][3310] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-10-02 06:29:29,444 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-10-02 06:29:29,783 [salt.state       :290 ][INFO    ][3310] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-10-02 06:29:29,783 [salt.state       :1941][INFO    ][3310] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 06:29:29.783853 duration_in_ms=1305.343
2018-10-02 06:29:29,784 [salt.state       :1770][INFO    ][3310] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 06:29:29.784285
2018-10-02 06:29:29,784 [salt.state       :1803][INFO    ][3310] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-10-02 06:29:29,785 [salt.state       :290 ][INFO    ][3310] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-10-02 06:29:29,785 [salt.state       :1941][INFO    ][3310] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 06:29:29.785487 duration_in_ms=1.202
2018-10-02 06:29:29,785 [salt.state       :1770][INFO    ][3310] Running state [/etc/apt/preferences.d/uca] at time 06:29:29.785747
2018-10-02 06:29:29,786 [salt.state       :1803][INFO    ][3310] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-10-02 06:29:30,178 [salt.state       :290 ][INFO    ][3310] File changed:
New file
2018-10-02 06:29:30,179 [salt.state       :1941][INFO    ][3310] Completed state [/etc/apt/preferences.d/uca] at time 06:29:30.179025 duration_in_ms=393.277
2018-10-02 06:29:30,181 [salt.state       :1770][INFO    ][3310] Running state [echo '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' | base64 -d | apt-key add -] at time 06:29:30.181475
2018-10-02 06:29:30,182 [salt.state       :1803][INFO    ][3310] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-10-02 06:29:30,183 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-10-02 06:29:30,374 [salt.state       :290 ][INFO    ][3310] {'pid': 3534, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-10-02 06:29:30,375 [salt.state       :1941][INFO    ][3310] Completed state [echo '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' | base64 -d | apt-key add -] at time 06:29:30.375346 duration_in_ms=193.87
2018-10-02 06:29:30,378 [salt.state       :1770][INFO    ][3310] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 06:29:30.378808
2018-10-02 06:29:30,379 [salt.state       :1803][INFO    ][3310] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-10-02 06:29:30,446 [salt.state       :290 ][INFO    ][3310] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-10-02 06:29:30,447 [salt.state       :1941][INFO    ][3310] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 06:29:30.447169 duration_in_ms=68.361
2018-10-02 06:29:30,448 [salt.state       :1770][INFO    ][3310] Running state [pkg.refresh_db] at time 06:29:30.448281
2018-10-02 06:29:30,448 [salt.state       :1803][INFO    ][3310] Executing state module.run for [pkg.refresh_db]
2018-10-02 06:29:30,449 [salt.utils.decorators:613 ][WARNING ][3310] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-02 06:29:30,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-02 06:29:35,233 [salt.state       :290 ][INFO    ][3310] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-10-02 06:29:35,235 [salt.state       :1941][INFO    ][3310] Completed state [pkg.refresh_db] at time 06:29:35.234934 duration_in_ms=4786.652
2018-10-02 06:29:35,235 [salt.state       :1770][INFO    ][3310] Running state [linux_extra_packages_latest] at time 06:29:35.235490
2018-10-02 06:29:35,236 [salt.state       :1803][INFO    ][3310] Executing state pkg.latest for [linux_extra_packages_latest]
2018-10-02 06:29:35,248 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-10-02 06:29:35,409 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 06:29:35,448 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-10-02 06:29:38,003 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002062937988478
2018-10-02 06:29:38,062 [salt.minion      :1431][INFO    ][4088] Starting a new job with PID 4088
2018-10-02 06:29:38,103 [salt.minion      :1708][INFO    ][4088] Returning information for job: 20181002062937988478
2018-10-02 06:29:41,539 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 06:29:41,567 [salt.state       :290 ][INFO    ][3310] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-10-02 06:29:41,584 [salt.state       :905 ][INFO    ][3310] Loading fresh modules for state activity
2018-10-02 06:29:41,609 [salt.state       :1941][INFO    ][3310] Completed state [linux_extra_packages_latest] at time 06:29:41.609756 duration_in_ms=6374.266
2018-10-02 06:29:41,612 [salt.state       :1770][INFO    ][3310] Running state [UTC] at time 06:29:41.612713
2018-10-02 06:29:41,612 [salt.state       :1803][INFO    ][3310] Executing state timezone.system for [UTC]
2018-10-02 06:29:41,616 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['timedatectl'] in directory '/root'
2018-10-02 06:29:41,697 [salt.state       :290 ][INFO    ][3310] Timezone UTC already set, UTC already set to UTC
2018-10-02 06:29:41,702 [salt.state       :1941][INFO    ][3310] Completed state [UTC] at time 06:29:41.701940 duration_in_ms=89.225
2018-10-02 06:29:41,709 [salt.state       :1770][INFO    ][3310] Running state [/etc/default/grub.d] at time 06:29:41.709598
2018-10-02 06:29:41,710 [salt.state       :1803][INFO    ][3310] Executing state file.directory for [/etc/default/grub.d]
2018-10-02 06:29:41,718 [salt.state       :290 ][INFO    ][3310] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-10-02 06:29:41,719 [salt.state       :1941][INFO    ][3310] Completed state [/etc/default/grub.d] at time 06:29:41.719189 duration_in_ms=9.59
2018-10-02 06:29:41,725 [salt.state       :1770][INFO    ][3310] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 06:29:41.725217
2018-10-02 06:29:41,725 [salt.state       :1803][INFO    ][3310] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2018-10-02 06:29:41,739 [salt.state       :290 ][INFO    ][3310] File changed:
New file
2018-10-02 06:29:41,739 [salt.state       :1941][INFO    ][3310] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 06:29:41.739368 duration_in_ms=14.151
2018-10-02 06:29:41,740 [salt.state       :1770][INFO    ][3310] Running state [update-grub] at time 06:29:41.740796
2018-10-02 06:29:41,741 [salt.state       :1803][INFO    ][3310] Executing state cmd.wait for [update-grub]
2018-10-02 06:29:41,741 [salt.state       :290 ][INFO    ][3310] No changes made for update-grub
2018-10-02 06:29:41,742 [salt.state       :1941][INFO    ][3310] Completed state [update-grub] at time 06:29:41.742363 duration_in_ms=1.567
2018-10-02 06:29:41,742 [salt.state       :1770][INFO    ][3310] Running state [update-grub] at time 06:29:41.742758
2018-10-02 06:29:41,743 [salt.state       :1803][INFO    ][3310] Executing state cmd.mod_watch for [update-grub]
2018-10-02 06:29:41,745 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'update-grub' in directory '/root'
2018-10-02 06:29:42,538 [salt.state       :290 ][INFO    ][3310] {'pid': 4178, 'retcode': 0, 'stderr': 'Generating grub configuration file ...\nFound linux image: /boot/vmlinuz-4.15.0-34-generic\nFound initrd image: /boot/initrd.img-4.15.0-34-generic\nFound linux image: /boot/vmlinuz-4.4.0-135-generic\nFound initrd image: /boot/initrd.img-4.4.0-135-generic\ndone', 'stdout': ''}
2018-10-02 06:29:42,540 [salt.state       :1941][INFO    ][3310] Completed state [update-grub] at time 06:29:42.539857 duration_in_ms=797.097
2018-10-02 06:29:42,546 [salt.state       :1770][INFO    ][3310] Running state [nf_conntrack] at time 06:29:42.545986
2018-10-02 06:29:42,546 [salt.state       :1803][INFO    ][3310] Executing state kmod.present for [nf_conntrack]
2018-10-02 06:29:42,548 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'lsmod' in directory '/root'
2018-10-02 06:29:43,479 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'lsmod' in directory '/root'
2018-10-02 06:29:43,499 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-10-02 06:29:43,571 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'lsmod' in directory '/root'
2018-10-02 06:29:43,706 [salt.state       :290 ][INFO    ][3310] {'nf_conntrack': 'loaded'}
2018-10-02 06:29:43,706 [salt.state       :1941][INFO    ][3310] Completed state [nf_conntrack] at time 06:29:43.706848 duration_in_ms=1160.861
2018-10-02 06:29:43,710 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.tcp_keepalive_probes] at time 06:29:43.710728
2018-10-02 06:29:43,711 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-10-02 06:29:43,712 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-10-02 06:29:43,749 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.tcp_keepalive_probes': 8}
2018-10-02 06:29:43,750 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.tcp_keepalive_probes] at time 06:29:43.750736 duration_in_ms=40.008
2018-10-02 06:29:43,751 [salt.state       :1770][INFO    ][3310] Running state [fs.file-max] at time 06:29:43.751617
2018-10-02 06:29:43,752 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [fs.file-max]
2018-10-02 06:29:43,754 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-10-02 06:29:43,778 [salt.state       :290 ][INFO    ][3310] {'fs.file-max': 124165}
2018-10-02 06:29:43,779 [salt.state       :1941][INFO    ][3310] Completed state [fs.file-max] at time 06:29:43.779232 duration_in_ms=27.615
2018-10-02 06:29:43,780 [salt.state       :1770][INFO    ][3310] Running state [net.core.somaxconn] at time 06:29:43.780012
2018-10-02 06:29:43,780 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.core.somaxconn]
2018-10-02 06:29:43,782 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-10-02 06:29:43,806 [salt.state       :290 ][INFO    ][3310] {'net.core.somaxconn': 4096}
2018-10-02 06:29:43,807 [salt.state       :1941][INFO    ][3310] Completed state [net.core.somaxconn] at time 06:29:43.806867 duration_in_ms=26.856
2018-10-02 06:29:43,807 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.tcp_max_syn_backlog] at time 06:29:43.807603
2018-10-02 06:29:43,808 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-10-02 06:29:43,810 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-10-02 06:29:43,830 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-10-02 06:29:43,831 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.tcp_max_syn_backlog] at time 06:29:43.831307 duration_in_ms=23.703
2018-10-02 06:29:43,832 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.tcp_tw_reuse] at time 06:29:43.832034
2018-10-02 06:29:43,832 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-10-02 06:29:43,834 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-10-02 06:29:43,854 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.tcp_tw_reuse': 1}
2018-10-02 06:29:43,854 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.tcp_tw_reuse] at time 06:29:43.854732 duration_in_ms=22.698
2018-10-02 06:29:43,855 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.tcp_congestion_control] at time 06:29:43.855419
2018-10-02 06:29:43,856 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-10-02 06:29:43,857 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-10-02 06:29:43,928 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-10-02 06:29:43,929 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.tcp_congestion_control] at time 06:29:43.929377 duration_in_ms=73.958
2018-10-02 06:29:43,930 [salt.state       :1770][INFO    ][3310] Running state [net.nf_conntrack_max] at time 06:29:43.930233
2018-10-02 06:29:43,931 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.nf_conntrack_max]
2018-10-02 06:29:43,933 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-10-02 06:29:43,958 [salt.state       :290 ][INFO    ][3310] {'net.nf_conntrack_max': 1048576}
2018-10-02 06:29:43,959 [salt.state       :1941][INFO    ][3310] Completed state [net.nf_conntrack_max] at time 06:29:43.959496 duration_in_ms=29.261
2018-10-02 06:29:43,960 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.tcp_retries2] at time 06:29:43.960517
2018-10-02 06:29:43,961 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-10-02 06:29:43,963 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-10-02 06:29:43,984 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.tcp_retries2': 5}
2018-10-02 06:29:43,985 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.tcp_retries2] at time 06:29:43.985526 duration_in_ms=25.009
2018-10-02 06:29:43,986 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.tcp_fin_timeout] at time 06:29:43.986444
2018-10-02 06:29:43,987 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-10-02 06:29:43,989 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-10-02 06:29:44,008 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.tcp_fin_timeout': 30}
2018-10-02 06:29:44,009 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.tcp_fin_timeout] at time 06:29:44.008994 duration_in_ms=22.549
2018-10-02 06:29:44,009 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.tcp_slow_start_after_idle] at time 06:29:44.009814
2018-10-02 06:29:44,010 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-10-02 06:29:44,012 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-10-02 06:29:44,029 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-10-02 06:29:44,030 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 06:29:44.030077 duration_in_ms=20.26
2018-10-02 06:29:44,030 [salt.state       :1770][INFO    ][3310] Running state [vm.swappiness] at time 06:29:44.030920
2018-10-02 06:29:44,031 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [vm.swappiness]
2018-10-02 06:29:44,033 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-10-02 06:29:44,049 [salt.state       :290 ][INFO    ][3310] {'vm.swappiness': 10}
2018-10-02 06:29:44,050 [salt.state       :1941][INFO    ][3310] Completed state [vm.swappiness] at time 06:29:44.050330 duration_in_ms=19.409
2018-10-02 06:29:44,051 [salt.state       :1770][INFO    ][3310] Running state [net.core.netdev_max_backlog] at time 06:29:44.051085
2018-10-02 06:29:44,051 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-10-02 06:29:44,053 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-10-02 06:29:44,069 [salt.state       :290 ][INFO    ][3310] {'net.core.netdev_max_backlog': 261144}
2018-10-02 06:29:44,069 [salt.state       :1941][INFO    ][3310] Completed state [net.core.netdev_max_backlog] at time 06:29:44.069761 duration_in_ms=18.675
2018-10-02 06:29:44,070 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.neigh.default.gc_thresh1] at time 06:29:44.070513
2018-10-02 06:29:44,071 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-10-02 06:29:44,072 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-10-02 06:29:44,087 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-10-02 06:29:44,088 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 06:29:44.088187 duration_in_ms=17.674
2018-10-02 06:29:44,088 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.neigh.default.gc_thresh2] at time 06:29:44.088873
2018-10-02 06:29:44,089 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-10-02 06:29:44,090 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-10-02 06:29:44,104 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-10-02 06:29:44,105 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 06:29:44.105394 duration_in_ms=16.521
2018-10-02 06:29:44,106 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.neigh.default.gc_thresh3] at time 06:29:44.106023
2018-10-02 06:29:44,106 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-10-02 06:29:44,107 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-10-02 06:29:44,121 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-10-02 06:29:44,122 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 06:29:44.122361 duration_in_ms=16.338
2018-10-02 06:29:44,123 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.tcp_keepalive_intvl] at time 06:29:44.122977
2018-10-02 06:29:44,123 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-10-02 06:29:44,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-10-02 06:29:44,185 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-10-02 06:29:44,186 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.tcp_keepalive_intvl] at time 06:29:44.185878 duration_in_ms=62.901
2018-10-02 06:29:44,186 [salt.state       :1770][INFO    ][3310] Running state [net.ipv4.tcp_keepalive_time] at time 06:29:44.186597
2018-10-02 06:29:44,187 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-10-02 06:29:44,188 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-10-02 06:29:44,203 [salt.state       :290 ][INFO    ][3310] {'net.ipv4.tcp_keepalive_time': 30}
2018-10-02 06:29:44,204 [salt.state       :1941][INFO    ][3310] Completed state [net.ipv4.tcp_keepalive_time] at time 06:29:44.204260 duration_in_ms=17.663
2018-10-02 06:29:44,204 [salt.state       :1770][INFO    ][3310] Running state [kernel.panic] at time 06:29:44.204902
2018-10-02 06:29:44,205 [salt.state       :1803][INFO    ][3310] Executing state sysctl.present for [kernel.panic]
2018-10-02 06:29:44,206 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-10-02 06:29:44,220 [salt.state       :290 ][INFO    ][3310] {'kernel.panic': 60}
2018-10-02 06:29:44,221 [salt.state       :1941][INFO    ][3310] Completed state [kernel.panic] at time 06:29:44.220897 duration_in_ms=15.995
2018-10-02 06:29:44,227 [salt.state       :1770][INFO    ][3310] Running state [linux_sysfs_package] at time 06:29:44.227179
2018-10-02 06:29:44,227 [salt.state       :1803][INFO    ][3310] Executing state pkg.installed for [linux_sysfs_package]
2018-10-02 06:29:44,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-10-02 06:29:45,010 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-02 06:29:46,936 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 06:29:46,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-10-02 06:29:48,129 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002062948115115
2018-10-02 06:29:48,164 [salt.minion      :1431][INFO    ][5027] Starting a new job with PID 5027
2018-10-02 06:29:48,191 [salt.minion      :1708][INFO    ][5027] Returning information for job: 20181002062948115115
2018-10-02 06:29:55,681 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 06:29:55,710 [salt.state       :290 ][INFO    ][3310] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-10-02 06:29:55,724 [salt.state       :905 ][INFO    ][3310] Loading fresh modules for state activity
2018-10-02 06:29:55,758 [salt.state       :1941][INFO    ][3310] Completed state [linux_sysfs_package] at time 06:29:55.758357 duration_in_ms=11531.178
2018-10-02 06:29:55,762 [salt.state       :1770][INFO    ][3310] Running state [/etc/sysfs.d] at time 06:29:55.762154
2018-10-02 06:29:55,762 [salt.state       :1803][INFO    ][3310] Executing state file.directory for [/etc/sysfs.d]
2018-10-02 06:29:55,765 [salt.state       :290 ][INFO    ][3310] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-10-02 06:29:55,766 [salt.state       :1941][INFO    ][3310] Completed state [/etc/sysfs.d] at time 06:29:55.766051 duration_in_ms=3.896
2018-10-02 06:29:56,203 [salt.state       :1770][INFO    ][3310] Running state [ondemand] at time 06:29:56.203081
2018-10-02 06:29:56,203 [salt.state       :1803][INFO    ][3310] Executing state service.dead for [ondemand]
2018-10-02 06:29:56,204 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-10-02 06:29:56,218 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-02 06:29:56,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-02 06:29:56,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-10-02 06:29:56,294 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-02 06:29:56,318 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-02 06:29:56,336 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-02 06:29:56,356 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-10-02 06:29:56,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-02 06:29:56,571 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'runlevel' in directory '/root'
2018-10-02 06:29:56,590 [salt.state       :290 ][INFO    ][3310] {'ondemand': True}
2018-10-02 06:29:56,592 [salt.state       :1941][INFO    ][3310] Completed state [ondemand] at time 06:29:56.591863 duration_in_ms=388.782
2018-10-02 06:29:56,594 [salt.state       :1770][INFO    ][3310] Running state [en_US.UTF-8] at time 06:29:56.594842
2018-10-02 06:29:56,595 [salt.state       :1803][INFO    ][3310] Executing state locale.present for [en_US.UTF-8]
2018-10-02 06:29:56,598 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'locale -a' in directory '/root'
2018-10-02 06:29:56,619 [salt.state       :290 ][INFO    ][3310] Locale en_US.UTF-8 is already present
2018-10-02 06:29:56,620 [salt.state       :1941][INFO    ][3310] Completed state [en_US.UTF-8] at time 06:29:56.620328 duration_in_ms=25.487
2018-10-02 06:29:56,623 [salt.state       :1770][INFO    ][3310] Running state [en_US.UTF-8] at time 06:29:56.623243
2018-10-02 06:29:56,624 [salt.state       :1803][INFO    ][3310] Executing state locale.system for [en_US.UTF-8]
2018-10-02 06:29:56,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'localectl' in directory '/root'
2018-10-02 06:29:56,711 [salt.state       :290 ][INFO    ][3310] System locale en_US.UTF-8 already set
2018-10-02 06:29:56,712 [salt.state       :1941][INFO    ][3310] Completed state [en_US.UTF-8] at time 06:29:56.711956 duration_in_ms=88.713
2018-10-02 06:29:56,713 [salt.state       :1770][INFO    ][3310] Running state [root] at time 06:29:56.713458
2018-10-02 06:29:56,713 [salt.state       :1803][INFO    ][3310] Executing state group.present for [root]
2018-10-02 06:29:56,714 [salt.state       :290 ][INFO    ][3310] Group root is present and up to date
2018-10-02 06:29:56,714 [salt.state       :1941][INFO    ][3310] Completed state [root] at time 06:29:56.714884 duration_in_ms=1.426
2018-10-02 06:29:56,718 [salt.state       :1770][INFO    ][3310] Running state [root] at time 06:29:56.717951
2018-10-02 06:29:56,718 [salt.state       :1803][INFO    ][3310] Executing state user.present for [root]
2018-10-02 06:29:56,723 [salt.state       :290 ][INFO    ][3310] User root is present and up to date
2018-10-02 06:29:56,723 [salt.state       :1941][INFO    ][3310] Completed state [root] at time 06:29:56.723568 duration_in_ms=5.617
2018-10-02 06:29:56,724 [salt.state       :1770][INFO    ][3310] Running state [/root] at time 06:29:56.724501
2018-10-02 06:29:56,724 [salt.state       :1803][INFO    ][3310] Executing state file.directory for [/root]
2018-10-02 06:29:56,725 [salt.state       :290 ][INFO    ][3310] Directory /root is in the correct state
Directory /root updated
2018-10-02 06:29:56,725 [salt.state       :1941][INFO    ][3310] Completed state [/root] at time 06:29:56.725935 duration_in_ms=1.434
2018-10-02 06:29:56,726 [salt.state       :1770][INFO    ][3310] Running state [/etc/sudoers.d/90-salt-user-root] at time 06:29:56.726240
2018-10-02 06:29:56,726 [salt.state       :1803][INFO    ][3310] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-10-02 06:29:56,726 [salt.state       :290 ][INFO    ][3310] File /etc/sudoers.d/90-salt-user-root is not present
2018-10-02 06:29:56,727 [salt.state       :1941][INFO    ][3310] Completed state [/etc/sudoers.d/90-salt-user-root] at time 06:29:56.727046 duration_in_ms=0.806
2018-10-02 06:29:56,727 [salt.state       :1770][INFO    ][3310] Running state [ubuntu] at time 06:29:56.727285
2018-10-02 06:29:56,727 [salt.state       :1803][INFO    ][3310] Executing state group.present for [ubuntu]
2018-10-02 06:29:56,728 [salt.state       :290 ][INFO    ][3310] Group ubuntu is present and up to date
2018-10-02 06:29:56,728 [salt.state       :1941][INFO    ][3310] Completed state [ubuntu] at time 06:29:56.728352 duration_in_ms=1.067
2018-10-02 06:29:56,729 [salt.state       :1770][INFO    ][3310] Running state [ubuntu] at time 06:29:56.729209
2018-10-02 06:29:56,729 [salt.state       :1803][INFO    ][3310] Executing state user.present for [ubuntu]
2018-10-02 06:29:56,733 [salt.state       :290 ][INFO    ][3310] {'passwd': 'XXX-REDACTED-XXX'}
2018-10-02 06:29:56,733 [salt.state       :1941][INFO    ][3310] Completed state [ubuntu] at time 06:29:56.733324 duration_in_ms=4.078
2018-10-02 06:29:56,734 [salt.state       :1770][INFO    ][3310] Running state [/home/ubuntu] at time 06:29:56.734257
2018-10-02 06:29:56,734 [salt.state       :1803][INFO    ][3310] Executing state file.directory for [/home/ubuntu]
2018-10-02 06:29:56,735 [salt.state       :290 ][INFO    ][3310] {'mode': '0700'}
2018-10-02 06:29:56,735 [salt.state       :1941][INFO    ][3310] Completed state [/home/ubuntu] at time 06:29:56.735802 duration_in_ms=1.546
2018-10-02 06:29:56,736 [salt.state       :1770][INFO    ][3310] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 06:29:56.736617
2018-10-02 06:29:56,736 [salt.state       :1803][INFO    ][3310] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-10-02 06:29:56,759 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-10-02 06:29:56,776 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.v2HbQT' in directory '/root'
2018-10-02 06:29:56,853 [salt.state       :290 ][INFO    ][3310] File changed:
New file
2018-10-02 06:29:56,855 [salt.state       :1941][INFO    ][3310] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 06:29:56.854891 duration_in_ms=118.271
2018-10-02 06:29:56,855 [salt.state       :1770][INFO    ][3310] Running state [/etc/security/limits.d/90-salt-default.conf] at time 06:29:56.855715
2018-10-02 06:29:56,856 [salt.state       :1803][INFO    ][3310] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-10-02 06:29:56,896 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-10-02 06:29:56,987 [salt.state       :290 ][INFO    ][3310] File changed:
New file
2018-10-02 06:29:56,987 [salt.state       :1941][INFO    ][3310] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 06:29:56.987376 duration_in_ms=131.661
2018-10-02 06:29:56,987 [salt.state       :1770][INFO    ][3310] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 06:29:56.987674
2018-10-02 06:29:56,987 [salt.state       :1803][INFO    ][3310] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-10-02 06:29:57,004 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-10-02 06:29:57,075 [salt.state       :290 ][INFO    ][3310] File changed:
New file
2018-10-02 06:29:57,075 [salt.state       :1941][INFO    ][3310] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 06:29:57.075673 duration_in_ms=87.998
2018-10-02 06:29:57,077 [salt.state       :1770][INFO    ][3310] Running state [service.systemctl_reload] at time 06:29:57.077792
2018-10-02 06:29:57,078 [salt.state       :1803][INFO    ][3310] Executing state module.wait for [service.systemctl_reload]
2018-10-02 06:29:57,078 [salt.state       :290 ][INFO    ][3310] No changes made for service.systemctl_reload
2018-10-02 06:29:57,078 [salt.state       :1941][INFO    ][3310] Completed state [service.systemctl_reload] at time 06:29:57.078527 duration_in_ms=0.735
2018-10-02 06:29:57,078 [salt.state       :1770][INFO    ][3310] Running state [service.systemctl_reload] at time 06:29:57.078705
2018-10-02 06:29:57,078 [salt.state       :1803][INFO    ][3310] Executing state module.mod_watch for [service.systemctl_reload]
2018-10-02 06:29:57,079 [salt.utils.decorators:613 ][WARNING ][3310] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-02 06:29:57,079 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-10-02 06:29:57,224 [salt.state       :290 ][INFO    ][3310] {'ret': True}
2018-10-02 06:29:57,225 [salt.state       :1941][INFO    ][3310] Completed state [service.systemctl_reload] at time 06:29:57.225553 duration_in_ms=146.846
2018-10-02 06:29:57,229 [salt.state       :1770][INFO    ][3310] Running state [/etc/issue] at time 06:29:57.229176
2018-10-02 06:29:57,229 [salt.state       :1803][INFO    ][3310] Executing state file.managed for [/etc/issue]
2018-10-02 06:29:57,240 [salt.state       :290 ][INFO    ][3310] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-10-02 06:29:57,241 [salt.state       :1941][INFO    ][3310] Completed state [/etc/issue] at time 06:29:57.241249 duration_in_ms=12.072
2018-10-02 06:29:57,241 [salt.state       :1770][INFO    ][3310] Running state [/etc/hostname] at time 06:29:57.241805
2018-10-02 06:29:57,242 [salt.state       :1803][INFO    ][3310] Executing state file.managed for [/etc/hostname]
2018-10-02 06:29:57,262 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-10-02 06:29:57,277 [salt.state       :290 ][INFO    ][3310] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb03

2018-10-02 06:29:57,278 [salt.state       :1941][INFO    ][3310] Completed state [/etc/hostname] at time 06:29:57.278192 duration_in_ms=36.387
2018-10-02 06:29:57,281 [salt.state       :1770][INFO    ][3310] Running state [hostname mdb03] at time 06:29:57.281565
2018-10-02 06:29:57,282 [salt.state       :1803][INFO    ][3310] Executing state cmd.run for [hostname mdb03]
2018-10-02 06:29:57,282 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'test "$(hostname)" = "mdb03"' in directory '/root'
2018-10-02 06:29:57,306 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command 'hostname mdb03' in directory '/root'
2018-10-02 06:29:57,333 [salt.state       :290 ][INFO    ][3310] {'pid': 5604, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-02 06:29:57,334 [salt.state       :1941][INFO    ][3310] Completed state [hostname mdb03] at time 06:29:57.334240 duration_in_ms=52.674
2018-10-02 06:29:57,336 [salt.state       :1770][INFO    ][3310] Running state [mdb02] at time 06:29:57.336111
2018-10-02 06:29:57,336 [salt.state       :1803][INFO    ][3310] Executing state host.present for [mdb02]
2018-10-02 06:29:57,338 [salt.state       :290 ][INFO    ][3310] {'host': 'mdb02'}
2018-10-02 06:29:57,338 [salt.state       :1941][INFO    ][3310] Completed state [mdb02] at time 06:29:57.338631 duration_in_ms=2.52
2018-10-02 06:29:57,339 [salt.state       :1770][INFO    ][3310] Running state [mdb02.mcp-odl-ha.local] at time 06:29:57.339073
2018-10-02 06:29:57,339 [salt.state       :1803][INFO    ][3310] Executing state host.present for [mdb02.mcp-odl-ha.local]
2018-10-02 06:29:57,342 [salt.state       :290 ][INFO    ][3310] {'host': 'mdb02.mcp-odl-ha.local'}
2018-10-02 06:29:57,342 [salt.state       :1941][INFO    ][3310] Completed state [mdb02.mcp-odl-ha.local] at time 06:29:57.342618 duration_in_ms=3.545
2018-10-02 06:29:57,343 [salt.state       :1770][INFO    ][3310] Running state [mdb03] at time 06:29:57.343012
2018-10-02 06:29:57,343 [salt.state       :1803][INFO    ][3310] Executing state host.present for [mdb03]
2018-10-02 06:29:57,385 [salt.state       :290 ][INFO    ][3310] {'host': 'mdb03'}
2018-10-02 06:29:57,385 [salt.state       :1941][INFO    ][3310] Completed state [mdb03] at time 06:29:57.385523 duration_in_ms=42.511
2018-10-02 06:29:57,385 [salt.state       :1770][INFO    ][3310] Running state [mdb03.mcp-odl-ha.local] at time 06:29:57.385843
2018-10-02 06:29:57,386 [salt.state       :1803][INFO    ][3310] Executing state host.present for [mdb03.mcp-odl-ha.local]
2018-10-02 06:29:57,391 [salt.state       :290 ][INFO    ][3310] {'host': 'mdb03.mcp-odl-ha.local'}
2018-10-02 06:29:57,391 [salt.state       :1941][INFO    ][3310] Completed state [mdb03.mcp-odl-ha.local] at time 06:29:57.391186 duration_in_ms=5.343
2018-10-02 06:29:57,391 [salt.state       :1770][INFO    ][3310] Running state [mdb01] at time 06:29:57.391482
2018-10-02 06:29:57,391 [salt.state       :1803][INFO    ][3310] Executing state host.present for [mdb01]
2018-10-02 06:29:57,397 [salt.state       :290 ][INFO    ][3310] {'host': 'mdb01'}
2018-10-02 06:29:57,397 [salt.state       :1941][INFO    ][3310] Completed state [mdb01] at time 06:29:57.397260 duration_in_ms=5.777
2018-10-02 06:29:57,397 [salt.state       :1770][INFO    ][3310] Running state [mdb01.mcp-odl-ha.local] at time 06:29:57.397555
2018-10-02 06:29:57,397 [salt.state       :1803][INFO    ][3310] Executing state host.present for [mdb01.mcp-odl-ha.local]
2018-10-02 06:29:57,403 [salt.state       :290 ][INFO    ][3310] {'host': 'mdb01.mcp-odl-ha.local'}
2018-10-02 06:29:57,403 [salt.state       :1941][INFO    ][3310] Completed state [mdb01.mcp-odl-ha.local] at time 06:29:57.403454 duration_in_ms=5.898
2018-10-02 06:29:57,404 [salt.state       :1770][INFO    ][3310] Running state [mdb] at time 06:29:57.403969
2018-10-02 06:29:57,404 [salt.state       :1803][INFO    ][3310] Executing state host.present for [mdb]
2018-10-02 06:29:57,413 [salt.state       :290 ][INFO    ][3310] {'host': 'mdb'}
2018-10-02 06:29:57,413 [salt.state       :1941][INFO    ][3310] Completed state [mdb] at time 06:29:57.413460 duration_in_ms=9.49
2018-10-02 06:29:57,414 [salt.state       :1770][INFO    ][3310] Running state [mdb.mcp-odl-ha.local] at time 06:29:57.413979
2018-10-02 06:29:57,414 [salt.state       :1803][INFO    ][3310] Executing state host.present for [mdb.mcp-odl-ha.local]
2018-10-02 06:29:57,421 [salt.state       :290 ][INFO    ][3310] {'host': 'mdb.mcp-odl-ha.local'}
2018-10-02 06:29:57,421 [salt.state       :1941][INFO    ][3310] Completed state [mdb.mcp-odl-ha.local] at time 06:29:57.421473 duration_in_ms=7.493
2018-10-02 06:29:57,422 [salt.state       :1770][INFO    ][3310] Running state [cfg01] at time 06:29:57.421952
2018-10-02 06:29:57,422 [salt.state       :1803][INFO    ][3310] Executing state host.present for [cfg01]
2018-10-02 06:29:57,427 [salt.state       :290 ][INFO    ][3310] {'host': 'cfg01'}
2018-10-02 06:29:57,427 [salt.state       :1941][INFO    ][3310] Completed state [cfg01] at time 06:29:57.427479 duration_in_ms=5.527
2018-10-02 06:29:57,428 [salt.state       :1770][INFO    ][3310] Running state [cfg01.mcp-odl-ha.local] at time 06:29:57.427967
2018-10-02 06:29:57,428 [salt.state       :1803][INFO    ][3310] Executing state host.present for [cfg01.mcp-odl-ha.local]
2018-10-02 06:29:57,433 [salt.state       :290 ][INFO    ][3310] {'host': 'cfg01.mcp-odl-ha.local'}
2018-10-02 06:29:57,433 [salt.state       :1941][INFO    ][3310] Completed state [cfg01.mcp-odl-ha.local] at time 06:29:57.433546 duration_in_ms=5.579
2018-10-02 06:29:57,434 [salt.state       :1770][INFO    ][3310] Running state [prx01] at time 06:29:57.434022
2018-10-02 06:29:57,434 [salt.state       :1803][INFO    ][3310] Executing state host.present for [prx01]
2018-10-02 06:29:57,439 [salt.state       :290 ][INFO    ][3310] {'host': 'prx01'}
2018-10-02 06:29:57,439 [salt.state       :1941][INFO    ][3310] Completed state [prx01] at time 06:29:57.439634 duration_in_ms=5.611
2018-10-02 06:29:57,440 [salt.state       :1770][INFO    ][3310] Running state [prx01.mcp-odl-ha.local] at time 06:29:57.440238
2018-10-02 06:29:57,440 [salt.state       :1803][INFO    ][3310] Executing state host.present for [prx01.mcp-odl-ha.local]
2018-10-02 06:29:57,445 [salt.state       :290 ][INFO    ][3310] {'host': 'prx01.mcp-odl-ha.local'}
2018-10-02 06:29:57,445 [salt.state       :1941][INFO    ][3310] Completed state [prx01.mcp-odl-ha.local] at time 06:29:57.445475 duration_in_ms=5.238
2018-10-02 06:29:57,446 [salt.state       :1770][INFO    ][3310] Running state [kvm01] at time 06:29:57.445965
2018-10-02 06:29:57,446 [salt.state       :1803][INFO    ][3310] Executing state host.present for [kvm01]
2018-10-02 06:29:57,463 [salt.state       :290 ][INFO    ][3310] {'host': 'kvm01'}
2018-10-02 06:29:57,463 [salt.state       :1941][INFO    ][3310] Completed state [kvm01] at time 06:29:57.463716 duration_in_ms=17.75
2018-10-02 06:29:57,464 [salt.state       :1770][INFO    ][3310] Running state [kvm01.mcp-odl-ha.local] at time 06:29:57.464305
2018-10-02 06:29:57,464 [salt.state       :1803][INFO    ][3310] Executing state host.present for [kvm01.mcp-odl-ha.local]
2018-10-02 06:29:57,475 [salt.state       :290 ][INFO    ][3310] {'host': 'kvm01.mcp-odl-ha.local'}
2018-10-02 06:29:57,475 [salt.state       :1941][INFO    ][3310] Completed state [kvm01.mcp-odl-ha.local] at time 06:29:57.475797 duration_in_ms=11.492
2018-10-02 06:29:57,476 [salt.state       :1770][INFO    ][3310] Running state [kvm03] at time 06:29:57.476482
2018-10-02 06:29:57,477 [salt.state       :1803][INFO    ][3310] Executing state host.present for [kvm03]
2018-10-02 06:29:57,487 [salt.state       :290 ][INFO    ][3310] {'host': 'kvm03'}
2018-10-02 06:29:57,487 [salt.state       :1941][INFO    ][3310] Completed state [kvm03] at time 06:29:57.487881 duration_in_ms=11.398
2018-10-02 06:29:57,488 [salt.state       :1770][INFO    ][3310] Running state [kvm03.mcp-odl-ha.local] at time 06:29:57.488578
2018-10-02 06:29:57,489 [salt.state       :1803][INFO    ][3310] Executing state host.present for [kvm03.mcp-odl-ha.local]
2018-10-02 06:29:57,499 [salt.state       :290 ][INFO    ][3310] {'host': 'kvm03.mcp-odl-ha.local'}
2018-10-02 06:29:57,500 [salt.state       :1941][INFO    ][3310] Completed state [kvm03.mcp-odl-ha.local] at time 06:29:57.499907 duration_in_ms=11.328
2018-10-02 06:29:57,500 [salt.state       :1770][INFO    ][3310] Running state [kvm02] at time 06:29:57.500618
2018-10-02 06:29:57,501 [salt.state       :1803][INFO    ][3310] Executing state host.present for [kvm02]
2018-10-02 06:29:57,511 [salt.state       :290 ][INFO    ][3310] {'host': 'kvm02'}
2018-10-02 06:29:57,511 [salt.state       :1941][INFO    ][3310] Completed state [kvm02] at time 06:29:57.511741 duration_in_ms=11.123
2018-10-02 06:29:57,512 [salt.state       :1770][INFO    ][3310] Running state [kvm02.mcp-odl-ha.local] at time 06:29:57.512348
2018-10-02 06:29:57,512 [salt.state       :1803][INFO    ][3310] Executing state host.present for [kvm02.mcp-odl-ha.local]
2018-10-02 06:29:57,541 [salt.state       :290 ][INFO    ][3310] {'host': 'kvm02.mcp-odl-ha.local'}
2018-10-02 06:29:57,542 [salt.state       :1941][INFO    ][3310] Completed state [kvm02.mcp-odl-ha.local] at time 06:29:57.542182 duration_in_ms=29.834
2018-10-02 06:29:57,542 [salt.state       :1770][INFO    ][3310] Running state [dbs] at time 06:29:57.542840
2018-10-02 06:29:57,543 [salt.state       :1803][INFO    ][3310] Executing state host.present for [dbs]
2018-10-02 06:29:57,626 [salt.state       :290 ][INFO    ][3310] {'host': 'dbs'}
2018-10-02 06:29:57,626 [salt.state       :1941][INFO    ][3310] Completed state [dbs] at time 06:29:57.626658 duration_in_ms=83.816
2018-10-02 06:29:57,627 [salt.state       :1770][INFO    ][3310] Running state [dbs.mcp-odl-ha.local] at time 06:29:57.627512
2018-10-02 06:29:57,628 [salt.state       :1803][INFO    ][3310] Executing state host.present for [dbs.mcp-odl-ha.local]
2018-10-02 06:29:57,633 [salt.state       :290 ][INFO    ][3310] {'host': 'dbs.mcp-odl-ha.local'}
2018-10-02 06:29:57,634 [salt.state       :1941][INFO    ][3310] Completed state [dbs.mcp-odl-ha.local] at time 06:29:57.634258 duration_in_ms=6.747
2018-10-02 06:29:57,634 [salt.state       :1770][INFO    ][3310] Running state [prx] at time 06:29:57.634774
2018-10-02 06:29:57,635 [salt.state       :1803][INFO    ][3310] Executing state host.present for [prx]
2018-10-02 06:29:57,645 [salt.state       :290 ][INFO    ][3310] {'host': 'prx'}
2018-10-02 06:29:57,645 [salt.state       :1941][INFO    ][3310] Completed state [prx] at time 06:29:57.645739 duration_in_ms=10.965
2018-10-02 06:29:57,646 [salt.state       :1770][INFO    ][3310] Running state [prx.mcp-odl-ha.local] at time 06:29:57.646226
2018-10-02 06:29:57,646 [salt.state       :1803][INFO    ][3310] Executing state host.present for [prx.mcp-odl-ha.local]
2018-10-02 06:29:57,651 [salt.state       :290 ][INFO    ][3310] {'host': 'prx.mcp-odl-ha.local'}
2018-10-02 06:29:57,651 [salt.state       :1941][INFO    ][3310] Completed state [prx.mcp-odl-ha.local] at time 06:29:57.651727 duration_in_ms=5.5
2018-10-02 06:29:57,652 [salt.state       :1770][INFO    ][3310] Running state [prx02] at time 06:29:57.652169
2018-10-02 06:29:57,652 [salt.state       :1803][INFO    ][3310] Executing state host.present for [prx02]
2018-10-02 06:29:57,657 [salt.state       :290 ][INFO    ][3310] {'host': 'prx02'}
2018-10-02 06:29:57,658 [salt.state       :1941][INFO    ][3310] Completed state [prx02] at time 06:29:57.657993 duration_in_ms=5.824
2018-10-02 06:29:57,658 [salt.state       :1770][INFO    ][3310] Running state [prx02.mcp-odl-ha.local] at time 06:29:57.658766
2018-10-02 06:29:57,659 [salt.state       :1803][INFO    ][3310] Executing state host.present for [prx02.mcp-odl-ha.local]
2018-10-02 06:29:57,669 [salt.state       :290 ][INFO    ][3310] {'host': 'prx02.mcp-odl-ha.local'}
2018-10-02 06:29:57,669 [salt.state       :1941][INFO    ][3310] Completed state [prx02.mcp-odl-ha.local] at time 06:29:57.669765 duration_in_ms=10.999
2018-10-02 06:29:57,670 [salt.state       :1770][INFO    ][3310] Running state [msg02] at time 06:29:57.670224
2018-10-02 06:29:57,670 [salt.state       :1803][INFO    ][3310] Executing state host.present for [msg02]
2018-10-02 06:29:57,693 [salt.state       :290 ][INFO    ][3310] {'host': 'msg02'}
2018-10-02 06:29:57,693 [salt.state       :1941][INFO    ][3310] Completed state [msg02] at time 06:29:57.693744 duration_in_ms=23.52
2018-10-02 06:29:57,694 [salt.state       :1770][INFO    ][3310] Running state [msg02.mcp-odl-ha.local] at time 06:29:57.694203
2018-10-02 06:29:57,694 [salt.state       :1803][INFO    ][3310] Executing state host.present for [msg02.mcp-odl-ha.local]
2018-10-02 06:29:57,699 [salt.state       :290 ][INFO    ][3310] {'host': 'msg02.mcp-odl-ha.local'}
2018-10-02 06:29:57,699 [salt.state       :1941][INFO    ][3310] Completed state [msg02.mcp-odl-ha.local] at time 06:29:57.699837 duration_in_ms=5.634
2018-10-02 06:29:57,700 [salt.state       :1770][INFO    ][3310] Running state [msg03] at time 06:29:57.700546
2018-10-02 06:29:57,701 [salt.state       :1803][INFO    ][3310] Executing state host.present for [msg03]
2018-10-02 06:29:57,705 [salt.state       :290 ][INFO    ][3310] {'host': 'msg03'}
2018-10-02 06:29:57,706 [salt.state       :1941][INFO    ][3310] Completed state [msg03] at time 06:29:57.705959 duration_in_ms=5.412
2018-10-02 06:29:57,706 [salt.state       :1770][INFO    ][3310] Running state [msg03.mcp-odl-ha.local] at time 06:29:57.706691
2018-10-02 06:29:57,707 [salt.state       :1803][INFO    ][3310] Executing state host.present for [msg03.mcp-odl-ha.local]
2018-10-02 06:29:57,711 [salt.state       :290 ][INFO    ][3310] {'host': 'msg03.mcp-odl-ha.local'}
2018-10-02 06:29:57,712 [salt.state       :1941][INFO    ][3310] Completed state [msg03.mcp-odl-ha.local] at time 06:29:57.712035 duration_in_ms=5.344
2018-10-02 06:29:57,712 [salt.state       :1770][INFO    ][3310] Running state [msg01] at time 06:29:57.712699
2018-10-02 06:29:57,713 [salt.state       :1803][INFO    ][3310] Executing state host.present for [msg01]
2018-10-02 06:29:57,717 [salt.state       :290 ][INFO    ][3310] {'host': 'msg01'}
2018-10-02 06:29:57,718 [salt.state       :1941][INFO    ][3310] Completed state [msg01] at time 06:29:57.717969 duration_in_ms=5.27
2018-10-02 06:29:57,718 [salt.state       :1770][INFO    ][3310] Running state [msg01.mcp-odl-ha.local] at time 06:29:57.718643
2018-10-02 06:29:57,719 [salt.state       :1803][INFO    ][3310] Executing state host.present for [msg01.mcp-odl-ha.local]
2018-10-02 06:29:57,723 [salt.state       :290 ][INFO    ][3310] {'host': 'msg01.mcp-odl-ha.local'}
2018-10-02 06:29:57,724 [salt.state       :1941][INFO    ][3310] Completed state [msg01.mcp-odl-ha.local] at time 06:29:57.724044 duration_in_ms=5.4
2018-10-02 06:29:57,724 [salt.state       :1770][INFO    ][3310] Running state [msg] at time 06:29:57.724666
2018-10-02 06:29:57,725 [salt.state       :1803][INFO    ][3310] Executing state host.present for [msg]
2018-10-02 06:29:57,735 [salt.state       :290 ][INFO    ][3310] {'host': 'msg'}
2018-10-02 06:29:57,736 [salt.state       :1941][INFO    ][3310] Completed state [msg] at time 06:29:57.736080 duration_in_ms=11.413
2018-10-02 06:29:57,736 [salt.state       :1770][INFO    ][3310] Running state [msg.mcp-odl-ha.local] at time 06:29:57.736711
2018-10-02 06:29:57,737 [salt.state       :1803][INFO    ][3310] Executing state host.present for [msg.mcp-odl-ha.local]
2018-10-02 06:29:57,747 [salt.state       :290 ][INFO    ][3310] {'host': 'msg.mcp-odl-ha.local'}
2018-10-02 06:29:57,748 [salt.state       :1941][INFO    ][3310] Completed state [msg.mcp-odl-ha.local] at time 06:29:57.747948 duration_in_ms=11.237
2018-10-02 06:29:57,748 [salt.state       :1770][INFO    ][3310] Running state [cfg01] at time 06:29:57.748547
2018-10-02 06:29:57,749 [salt.state       :1803][INFO    ][3310] Executing state host.present for [cfg01]
2018-10-02 06:29:57,749 [salt.state       :290 ][INFO    ][3310] Host cfg01 (10.167.4.11) already present
2018-10-02 06:29:57,750 [salt.state       :1941][INFO    ][3310] Completed state [cfg01] at time 06:29:57.750040 duration_in_ms=1.494
2018-10-02 06:29:57,750 [salt.state       :1770][INFO    ][3310] Running state [cfg01.mcp-odl-ha.local] at time 06:29:57.750612
2018-10-02 06:29:57,751 [salt.state       :1803][INFO    ][3310] Executing state host.present for [cfg01.mcp-odl-ha.local]
2018-10-02 06:29:57,751 [salt.state       :290 ][INFO    ][3310] Host cfg01.mcp-odl-ha.local (10.167.4.11) already present
2018-10-02 06:29:57,752 [salt.state       :1941][INFO    ][3310] Completed state [cfg01.mcp-odl-ha.local] at time 06:29:57.752046 duration_in_ms=1.434
2018-10-02 06:29:57,752 [salt.state       :1770][INFO    ][3310] Running state [cmp002] at time 06:29:57.752625
2018-10-02 06:29:57,753 [salt.state       :1803][INFO    ][3310] Executing state host.present for [cmp002]
2018-10-02 06:29:57,759 [salt.state       :290 ][INFO    ][3310] {'host': 'cmp002'}
2018-10-02 06:29:57,760 [salt.state       :1941][INFO    ][3310] Completed state [cmp002] at time 06:29:57.760085 duration_in_ms=7.46
2018-10-02 06:29:57,760 [salt.state       :1770][INFO    ][3310] Running state [cmp002.mcp-odl-ha.local] at time 06:29:57.760714
2018-10-02 06:29:57,761 [salt.state       :1803][INFO    ][3310] Executing state host.present for [cmp002.mcp-odl-ha.local]
2018-10-02 06:29:57,771 [salt.state       :290 ][INFO    ][3310] {'host': 'cmp002.mcp-odl-ha.local'}
2018-10-02 06:29:57,772 [salt.state       :1941][INFO    ][3310] Completed state [cmp002.mcp-odl-ha.local] at time 06:29:57.771932 duration_in_ms=11.217
2018-10-02 06:29:57,772 [salt.state       :1770][INFO    ][3310] Running state [cmp001] at time 06:29:57.772571
2018-10-02 06:29:57,773 [salt.state       :1803][INFO    ][3310] Executing state host.present for [cmp001]
2018-10-02 06:29:57,817 [salt.state       :290 ][INFO    ][3310] {'host': 'cmp001'}
2018-10-02 06:29:57,817 [salt.state       :1941][INFO    ][3310] Completed state [cmp001] at time 06:29:57.817731 duration_in_ms=45.159
2018-10-02 06:29:57,818 [salt.state       :1770][INFO    ][3310] Running state [cmp001.mcp-odl-ha.local] at time 06:29:57.818470
2018-10-02 06:29:57,818 [salt.state       :1803][INFO    ][3310] Executing state host.present for [cmp001.mcp-odl-ha.local]
2018-10-02 06:29:57,840 [salt.state       :290 ][INFO    ][3310] {'host': 'cmp001.mcp-odl-ha.local'}
2018-10-02 06:29:57,841 [salt.state       :1941][INFO    ][3310] Completed state [cmp001.mcp-odl-ha.local] at time 06:29:57.841285 duration_in_ms=22.816
2018-10-02 06:29:57,841 [salt.state       :1770][INFO    ][3310] Running state [dbs01] at time 06:29:57.841734
2018-10-02 06:29:57,842 [salt.state       :1803][INFO    ][3310] Executing state host.present for [dbs01]
2018-10-02 06:29:57,858 [salt.state       :290 ][INFO    ][3310] {'host': 'dbs01'}
2018-10-02 06:29:57,859 [salt.state       :1941][INFO    ][3310] Completed state [dbs01] at time 06:29:57.858938 duration_in_ms=17.203
2018-10-02 06:29:57,859 [salt.state       :1770][INFO    ][3310] Running state [dbs01.mcp-odl-ha.local] at time 06:29:57.859572
2018-10-02 06:29:57,860 [salt.state       :1803][INFO    ][3310] Executing state host.present for [dbs01.mcp-odl-ha.local]
2018-10-02 06:29:57,888 [salt.state       :290 ][INFO    ][3310] {'host': 'dbs01.mcp-odl-ha.local'}
2018-10-02 06:29:57,889 [salt.state       :1941][INFO    ][3310] Completed state [dbs01.mcp-odl-ha.local] at time 06:29:57.889289 duration_in_ms=29.718
2018-10-02 06:29:57,889 [salt.state       :1770][INFO    ][3310] Running state [dbs02] at time 06:29:57.889727
2018-10-02 06:29:57,890 [salt.state       :1803][INFO    ][3310] Executing state host.present for [dbs02]
2018-10-02 06:29:57,894 [salt.state       :290 ][INFO    ][3310] {'host': 'dbs02'}
2018-10-02 06:29:57,894 [salt.state       :1941][INFO    ][3310] Completed state [dbs02] at time 06:29:57.894728 duration_in_ms=5.001
2018-10-02 06:29:57,895 [salt.state       :1770][INFO    ][3310] Running state [dbs02.mcp-odl-ha.local] at time 06:29:57.895079
2018-10-02 06:29:57,895 [salt.state       :1803][INFO    ][3310] Executing state host.present for [dbs02.mcp-odl-ha.local]
2018-10-02 06:29:57,900 [salt.state       :290 ][INFO    ][3310] {'host': 'dbs02.mcp-odl-ha.local'}
2018-10-02 06:29:57,900 [salt.state       :1941][INFO    ][3310] Completed state [dbs02.mcp-odl-ha.local] at time 06:29:57.900794 duration_in_ms=5.701
2018-10-02 06:29:57,901 [salt.state       :1770][INFO    ][3310] Running state [dbs03] at time 06:29:57.901145
2018-10-02 06:29:57,901 [salt.state       :1803][INFO    ][3310] Executing state host.present for [dbs03]
2018-10-02 06:29:57,906 [salt.state       :290 ][INFO    ][3310] {'host': 'dbs03'}
2018-10-02 06:29:57,906 [salt.state       :1941][INFO    ][3310] Completed state [dbs03] at time 06:29:57.906905 duration_in_ms=5.759
2018-10-02 06:29:57,907 [salt.state       :1770][INFO    ][3310] Running state [dbs03.mcp-odl-ha.local] at time 06:29:57.907251
2018-10-02 06:29:57,907 [salt.state       :1803][INFO    ][3310] Executing state host.present for [dbs03.mcp-odl-ha.local]
2018-10-02 06:29:57,912 [salt.state       :290 ][INFO    ][3310] {'host': 'dbs03.mcp-odl-ha.local'}
2018-10-02 06:29:57,912 [salt.state       :1941][INFO    ][3310] Completed state [dbs03.mcp-odl-ha.local] at time 06:29:57.912886 duration_in_ms=5.635
2018-10-02 06:29:57,913 [salt.state       :1770][INFO    ][3310] Running state [odl01] at time 06:29:57.913255
2018-10-02 06:29:57,913 [salt.state       :1803][INFO    ][3310] Executing state host.present for [odl01]
2018-10-02 06:29:57,918 [salt.state       :290 ][INFO    ][3310] {'host': 'odl01'}
2018-10-02 06:29:57,919 [salt.state       :1941][INFO    ][3310] Completed state [odl01] at time 06:29:57.919071 duration_in_ms=5.816
2018-10-02 06:29:57,919 [salt.state       :1770][INFO    ][3310] Running state [odl01.mcp-odl-ha.local] at time 06:29:57.919424
2018-10-02 06:29:57,919 [salt.state       :1803][INFO    ][3310] Executing state host.present for [odl01.mcp-odl-ha.local]
2018-10-02 06:29:57,930 [salt.state       :290 ][INFO    ][3310] {'host': 'odl01.mcp-odl-ha.local'}
2018-10-02 06:29:57,931 [salt.state       :1941][INFO    ][3310] Completed state [odl01.mcp-odl-ha.local] at time 06:29:57.930941 duration_in_ms=11.517
2018-10-02 06:29:57,931 [salt.state       :1770][INFO    ][3310] Running state [mas01] at time 06:29:57.931493
2018-10-02 06:29:57,931 [salt.state       :1803][INFO    ][3310] Executing state host.present for [mas01]
2018-10-02 06:29:57,936 [salt.state       :290 ][INFO    ][3310] {'host': 'mas01'}
2018-10-02 06:29:57,937 [salt.state       :1941][INFO    ][3310] Completed state [mas01] at time 06:29:57.937026 duration_in_ms=5.533
2018-10-02 06:29:57,937 [salt.state       :1770][INFO    ][3310] Running state [mas01.mcp-odl-ha.local] at time 06:29:57.937397
2018-10-02 06:29:57,937 [salt.state       :1803][INFO    ][3310] Executing state host.present for [mas01.mcp-odl-ha.local]
2018-10-02 06:29:57,942 [salt.state       :290 ][INFO    ][3310] {'host': 'mas01.mcp-odl-ha.local'}
2018-10-02 06:29:57,942 [salt.state       :1941][INFO    ][3310] Completed state [mas01.mcp-odl-ha.local] at time 06:29:57.942874 duration_in_ms=5.477
2018-10-02 06:29:57,943 [salt.state       :1770][INFO    ][3310] Running state [ctl02] at time 06:29:57.943234
2018-10-02 06:29:57,943 [salt.state       :1803][INFO    ][3310] Executing state host.present for [ctl02]
2018-10-02 06:29:57,948 [salt.state       :290 ][INFO    ][3310] {'host': 'ctl02'}
2018-10-02 06:29:57,948 [salt.state       :1941][INFO    ][3310] Completed state [ctl02] at time 06:29:57.948930 duration_in_ms=5.696
2018-10-02 06:29:57,949 [salt.state       :1770][INFO    ][3310] Running state [ctl02.mcp-odl-ha.local] at time 06:29:57.949306
2018-10-02 06:29:57,949 [salt.state       :1803][INFO    ][3310] Executing state host.present for [ctl02.mcp-odl-ha.local]
2018-10-02 06:29:57,954 [salt.state       :290 ][INFO    ][3310] {'host': 'ctl02.mcp-odl-ha.local'}
2018-10-02 06:29:57,954 [salt.state       :1941][INFO    ][3310] Completed state [ctl02.mcp-odl-ha.local] at time 06:29:57.954922 duration_in_ms=5.616
2018-10-02 06:29:57,955 [salt.state       :1770][INFO    ][3310] Running state [ctl03] at time 06:29:57.955288
2018-10-02 06:29:57,955 [salt.state       :1803][INFO    ][3310] Executing state host.present for [ctl03]
2018-10-02 06:29:57,960 [salt.state       :290 ][INFO    ][3310] {'host': 'ctl03'}
2018-10-02 06:29:57,960 [salt.state       :1941][INFO    ][3310] Completed state [ctl03] at time 06:29:57.960938 duration_in_ms=5.65
2018-10-02 06:29:57,961 [salt.state       :1770][INFO    ][3310] Running state [ctl03.mcp-odl-ha.local] at time 06:29:57.961302
2018-10-02 06:29:57,961 [salt.state       :1803][INFO    ][3310] Executing state host.present for [ctl03.mcp-odl-ha.local]
2018-10-02 06:29:57,966 [salt.state       :290 ][INFO    ][3310] {'host': 'ctl03.mcp-odl-ha.local'}
2018-10-02 06:29:57,967 [salt.state       :1941][INFO    ][3310] Completed state [ctl03.mcp-odl-ha.local] at time 06:29:57.966965 duration_in_ms=5.663
2018-10-02 06:29:57,967 [salt.state       :1770][INFO    ][3310] Running state [ctl01] at time 06:29:57.967330
2018-10-02 06:29:57,967 [salt.state       :1803][INFO    ][3310] Executing state host.present for [ctl01]
2018-10-02 06:29:58,014 [salt.state       :290 ][INFO    ][3310] {'host': 'ctl01'}
2018-10-02 06:29:58,015 [salt.state       :1941][INFO    ][3310] Completed state [ctl01] at time 06:29:58.015192 duration_in_ms=47.862
2018-10-02 06:29:58,015 [salt.state       :1770][INFO    ][3310] Running state [ctl01.mcp-odl-ha.local] at time 06:29:58.015628
2018-10-02 06:29:58,015 [salt.state       :1803][INFO    ][3310] Executing state host.present for [ctl01.mcp-odl-ha.local]
2018-10-02 06:29:58,026 [salt.state       :290 ][INFO    ][3310] {'host': 'ctl01.mcp-odl-ha.local'}
2018-10-02 06:29:58,026 [salt.state       :1941][INFO    ][3310] Completed state [ctl01.mcp-odl-ha.local] at time 06:29:58.026806 duration_in_ms=11.177
2018-10-02 06:29:58,027 [salt.state       :1770][INFO    ][3310] Running state [ctl] at time 06:29:58.027505
2018-10-02 06:29:58,028 [salt.state       :1803][INFO    ][3310] Executing state host.present for [ctl]
2018-10-02 06:29:58,068 [salt.state       :290 ][INFO    ][3310] {'host': 'ctl'}
2018-10-02 06:29:58,068 [salt.state       :1941][INFO    ][3310] Completed state [ctl] at time 06:29:58.068685 duration_in_ms=41.181
2018-10-02 06:29:58,069 [salt.state       :1770][INFO    ][3310] Running state [ctl.mcp-odl-ha.local] at time 06:29:58.069444
2018-10-02 06:29:58,069 [salt.state       :1803][INFO    ][3310] Executing state host.present for [ctl.mcp-odl-ha.local]
2018-10-02 06:29:58,074 [salt.state       :290 ][INFO    ][3310] {'host': 'ctl.mcp-odl-ha.local'}
2018-10-02 06:29:58,074 [salt.state       :1941][INFO    ][3310] Completed state [ctl.mcp-odl-ha.local] at time 06:29:58.074749 duration_in_ms=5.305
2018-10-02 06:29:58,075 [salt.state       :1770][INFO    ][3310] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 06:29:58.075279
2018-10-02 06:29:58,075 [salt.state       :1803][INFO    ][3310] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-10-02 06:29:58,076 [salt.state       :290 ][INFO    ][3310] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-10-02 06:29:58,077 [salt.state       :1941][INFO    ][3310] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 06:29:58.076948 duration_in_ms=1.669
2018-10-02 06:29:58,080 [salt.state       :1770][INFO    ][3310] Running state [ens3] at time 06:29:58.080025
2018-10-02 06:29:58,080 [salt.state       :1803][INFO    ][3310] Executing state network.managed for [ens3]
2018-10-02 06:29:58,241 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002062958227545
2018-10-02 06:29:58,275 [salt.minion      :1431][INFO    ][5609] Starting a new job with PID 5609
2018-10-02 06:29:58,296 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['ifup', 'ens3'] in directory '/root'
2018-10-02 06:29:58,307 [salt.minion      :1708][INFO    ][5609] Returning information for job: 20181002062958227545
2018-10-02 06:29:59,302 [salt.state       :290 ][INFO    ][3310] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-10-02 06:29:59,303 [salt.state       :1941][INFO    ][3310] Completed state [ens3] at time 06:29:59.303267 duration_in_ms=1223.243
2018-10-02 06:29:59,303 [salt.state       :1770][INFO    ][3310] Running state [ens2] at time 06:29:59.303785
2018-10-02 06:29:59,304 [salt.state       :1803][INFO    ][3310] Executing state network.managed for [ens2]
2018-10-02 06:29:59,332 [salt.state       :290 ][INFO    ][3310] {'interface': 'Added network interface.'}
2018-10-02 06:29:59,333 [salt.state       :1941][INFO    ][3310] Completed state [ens2] at time 06:29:59.333530 duration_in_ms=29.745
2018-10-02 06:29:59,334 [salt.state       :1770][INFO    ][3310] Running state [linux_system_network] at time 06:29:59.334102
2018-10-02 06:29:59,334 [salt.state       :1803][INFO    ][3310] Executing state network.system for [linux_system_network]
2018-10-02 06:29:59,335 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-10-02 06:29:59,351 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-10-02 06:29:59,374 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-10-02 06:29:59,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-10-02 06:29:59,817 [salt.loaded.int.module.debian_ip:1970][WARNING ][3310] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-10-02 06:29:59,818 [salt.state       :290 ][INFO    ][3310] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb03\n\n+DOMAIN=mcp-odl-ha.local\n\n+SEARCH=maas\n'}
2018-10-02 06:29:59,818 [salt.state       :1941][INFO    ][3310] Completed state [linux_system_network] at time 06:29:59.818771 duration_in_ms=484.669
2018-10-02 06:29:59,819 [salt.state       :1770][INFO    ][3310] Running state [/etc/profile.d/proxy.sh] at time 06:29:59.819322
2018-10-02 06:29:59,819 [salt.state       :1803][INFO    ][3310] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-10-02 06:29:59,820 [salt.state       :290 ][INFO    ][3310] File /etc/profile.d/proxy.sh is not present
2018-10-02 06:29:59,820 [salt.state       :1941][INFO    ][3310] Completed state [/etc/profile.d/proxy.sh] at time 06:29:59.820915 duration_in_ms=1.593
2018-10-02 06:29:59,821 [salt.state       :1770][INFO    ][3310] Running state [/etc/apt/apt.conf.d/95proxies] at time 06:29:59.821320
2018-10-02 06:29:59,821 [salt.state       :1803][INFO    ][3310] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-10-02 06:29:59,822 [salt.state       :290 ][INFO    ][3310] File /etc/apt/apt.conf.d/95proxies is not present
2018-10-02 06:29:59,822 [salt.state       :1941][INFO    ][3310] Completed state [/etc/apt/apt.conf.d/95proxies] at time 06:29:59.822552 duration_in_ms=1.232
2018-10-02 06:29:59,824 [salt.state       :1770][INFO    ][3310] Running state [ntp] at time 06:29:59.824594
2018-10-02 06:29:59,825 [salt.state       :1803][INFO    ][3310] Executing state pkg.installed for [ntp]
2018-10-02 06:29:59,995 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 06:30:00,022 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-10-02 06:30:08,310 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063008298178
2018-10-02 06:30:08,330 [salt.minion      :1431][INFO    ][6642] Starting a new job with PID 6642
2018-10-02 06:30:08,349 [salt.minion      :1708][INFO    ][6642] Returning information for job: 20181002063008298178
2018-10-02 06:30:08,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 06:30:08,385 [salt.state       :290 ][INFO    ][3310] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-10-02 06:30:08,398 [salt.state       :905 ][INFO    ][3310] Loading fresh modules for state activity
2018-10-02 06:30:08,426 [salt.state       :1941][INFO    ][3310] Completed state [ntp] at time 06:30:08.426728 duration_in_ms=8602.131
2018-10-02 06:30:08,436 [salt.state       :1770][INFO    ][3310] Running state [/etc/ntp.conf] at time 06:30:08.436320
2018-10-02 06:30:08,437 [salt.state       :1803][INFO    ][3310] Executing state file.managed for [/etc/ntp.conf]
2018-10-02 06:30:08,469 [salt.fileclient  :1215][INFO    ][3310] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-10-02 06:30:08,564 [salt.state       :290 ][INFO    ][3310] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.pool.ntp.org iburst
+server 0.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-10-02 06:30:08,572 [salt.state       :1941][INFO    ][3310] Completed state [/etc/ntp.conf] at time 06:30:08.572817 duration_in_ms=136.499
2018-10-02 06:30:08,900 [salt.state       :1770][INFO    ][3310] Running state [ntp] at time 06:30:08.900223
2018-10-02 06:30:08,901 [salt.state       :1803][INFO    ][3310] Executing state service.running for [ntp]
2018-10-02 06:30:08,902 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-10-02 06:30:08,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-02 06:30:08,942 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-10-02 06:30:08,966 [salt.state       :290 ][INFO    ][3310] The service ntp is already running
2018-10-02 06:30:08,967 [salt.state       :1941][INFO    ][3310] Completed state [ntp] at time 06:30:08.967283 duration_in_ms=67.06
2018-10-02 06:30:08,968 [salt.state       :1770][INFO    ][3310] Running state [ntp] at time 06:30:08.968017
2018-10-02 06:30:08,968 [salt.state       :1803][INFO    ][3310] Executing state service.mod_watch for [ntp]
2018-10-02 06:30:08,969 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-02 06:30:08,989 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3310] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-10-02 06:30:09,066 [salt.state       :290 ][INFO    ][3310] {'ntp': True}
2018-10-02 06:30:09,067 [salt.state       :1941][INFO    ][3310] Completed state [ntp] at time 06:30:09.067034 duration_in_ms=99.017
2018-10-02 06:30:09,071 [salt.minion      :1708][INFO    ][3310] Returning information for job: 20181002062912628320
2018-10-02 06:30:25,810 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181002063025798969
2018-10-02 06:30:25,835 [salt.minion      :1431][INFO    ][6757] Starting a new job with PID 6757
2018-10-02 06:30:25,869 [salt.minion      :1708][INFO    ][6757] Returning information for job: 20181002063025798969
2018-10-02 06:31:08,846 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command pkg.upgrade with jid 20181002063108839103
2018-10-02 06:31:08,886 [salt.minion      :1431][INFO    ][6774] Starting a new job with PID 6774
2018-10-02 06:31:08,924 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6774] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 06:31:09,455 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6774] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-10-02 06:31:13,954 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063113940929
2018-10-02 06:31:13,988 [salt.minion      :1431][INFO    ][6807] Starting a new job with PID 6807
2018-10-02 06:31:14,019 [salt.minion      :1708][INFO    ][6807] Returning information for job: 20181002063113940929
2018-10-02 06:31:24,035 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063124021931
2018-10-02 06:31:24,065 [salt.minion      :1431][INFO    ][6812] Starting a new job with PID 6812
2018-10-02 06:31:24,097 [salt.minion      :1708][INFO    ][6812] Returning information for job: 20181002063124021931
2018-10-02 06:31:34,154 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063134136571
2018-10-02 06:31:34,193 [salt.minion      :1431][INFO    ][6817] Starting a new job with PID 6817
2018-10-02 06:31:34,225 [salt.minion      :1708][INFO    ][6817] Returning information for job: 20181002063134136571
2018-10-02 06:31:44,230 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063144218290
2018-10-02 06:31:44,279 [salt.minion      :1431][INFO    ][6822] Starting a new job with PID 6822
2018-10-02 06:31:44,309 [salt.minion      :1708][INFO    ][6822] Returning information for job: 20181002063144218290
2018-10-02 06:31:54,339 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063154328185
2018-10-02 06:31:54,372 [salt.minion      :1431][INFO    ][6827] Starting a new job with PID 6827
2018-10-02 06:31:54,407 [salt.minion      :1708][INFO    ][6827] Returning information for job: 20181002063154328185
2018-10-02 06:32:04,431 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063204419060
2018-10-02 06:32:04,480 [salt.minion      :1431][INFO    ][6832] Starting a new job with PID 6832
2018-10-02 06:32:04,511 [salt.minion      :1708][INFO    ][6832] Returning information for job: 20181002063204419060
2018-10-02 06:32:14,500 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063214486405
2018-10-02 06:32:14,539 [salt.minion      :1431][INFO    ][6837] Starting a new job with PID 6837
2018-10-02 06:32:14,569 [salt.minion      :1708][INFO    ][6837] Returning information for job: 20181002063214486405
2018-10-02 06:32:24,685 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063224671442
2018-10-02 06:32:24,715 [salt.minion      :1431][INFO    ][6842] Starting a new job with PID 6842
2018-10-02 06:32:24,744 [salt.minion      :1708][INFO    ][6842] Returning information for job: 20181002063224671442
2018-10-02 06:32:34,754 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063234741912
2018-10-02 06:32:34,798 [salt.minion      :1431][INFO    ][6847] Starting a new job with PID 6847
2018-10-02 06:32:34,824 [salt.minion      :1708][INFO    ][6847] Returning information for job: 20181002063234741912
2018-10-02 06:32:44,933 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063244919445
2018-10-02 06:32:44,972 [salt.minion      :1431][INFO    ][6852] Starting a new job with PID 6852
2018-10-02 06:32:45,005 [salt.minion      :1708][INFO    ][6852] Returning information for job: 20181002063244919445
2018-10-02 06:32:55,009 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063254998067
2018-10-02 06:32:55,042 [salt.minion      :1431][INFO    ][6857] Starting a new job with PID 6857
2018-10-02 06:32:55,080 [salt.minion      :1708][INFO    ][6857] Returning information for job: 20181002063254998067
2018-10-02 06:33:05,129 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063305116229
2018-10-02 06:33:05,166 [salt.minion      :1431][INFO    ][6862] Starting a new job with PID 6862
2018-10-02 06:33:05,196 [salt.minion      :1708][INFO    ][6862] Returning information for job: 20181002063305116229
2018-10-02 06:33:15,288 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063315275932
2018-10-02 06:33:15,311 [salt.minion      :1431][INFO    ][6867] Starting a new job with PID 6867
2018-10-02 06:33:15,335 [salt.minion      :1708][INFO    ][6867] Returning information for job: 20181002063315275932
2018-10-02 06:33:25,413 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063325402559
2018-10-02 06:33:25,448 [salt.minion      :1431][INFO    ][6872] Starting a new job with PID 6872
2018-10-02 06:33:25,481 [salt.minion      :1708][INFO    ][6872] Returning information for job: 20181002063325402559
2018-10-02 06:33:35,501 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063335490731
2018-10-02 06:33:35,530 [salt.minion      :1431][INFO    ][6877] Starting a new job with PID 6877
2018-10-02 06:33:35,560 [salt.minion      :1708][INFO    ][6877] Returning information for job: 20181002063335490731
2018-10-02 06:33:45,581 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063345570867
2018-10-02 06:33:45,603 [salt.minion      :1431][INFO    ][6985] Starting a new job with PID 6985
2018-10-02 06:33:45,624 [salt.minion      :1708][INFO    ][6985] Returning information for job: 20181002063345570867
2018-10-02 06:33:55,655 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063355640152
2018-10-02 06:33:55,679 [salt.minion      :1431][INFO    ][6990] Starting a new job with PID 6990
2018-10-02 06:33:55,694 [salt.minion      :1708][INFO    ][6990] Returning information for job: 20181002063355640152
2018-10-02 06:34:05,724 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063405708114
2018-10-02 06:34:05,750 [salt.minion      :1431][INFO    ][6995] Starting a new job with PID 6995
2018-10-02 06:34:05,778 [salt.minion      :1708][INFO    ][6995] Returning information for job: 20181002063405708114
2018-10-02 06:34:15,821 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063415805624
2018-10-02 06:34:15,853 [salt.minion      :1431][INFO    ][7000] Starting a new job with PID 7000
2018-10-02 06:34:15,891 [salt.minion      :1708][INFO    ][7000] Returning information for job: 20181002063415805624
2018-10-02 06:34:25,935 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063425920027
2018-10-02 06:34:25,975 [salt.minion      :1431][INFO    ][7005] Starting a new job with PID 7005
2018-10-02 06:34:26,005 [salt.minion      :1708][INFO    ][7005] Returning information for job: 20181002063425920027
2018-10-02 06:34:36,003 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063435988025
2018-10-02 06:34:36,032 [salt.minion      :1431][INFO    ][7010] Starting a new job with PID 7010
2018-10-02 06:34:36,059 [salt.minion      :1708][INFO    ][7010] Returning information for job: 20181002063435988025
2018-10-02 06:34:46,082 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063446066686
2018-10-02 06:34:46,113 [salt.minion      :1431][INFO    ][7015] Starting a new job with PID 7015
2018-10-02 06:34:46,155 [salt.minion      :1708][INFO    ][7015] Returning information for job: 20181002063446066686
2018-10-02 06:34:56,269 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063456252260
2018-10-02 06:34:56,297 [salt.minion      :1431][INFO    ][7046] Starting a new job with PID 7046
2018-10-02 06:34:56,325 [salt.minion      :1708][INFO    ][7046] Returning information for job: 20181002063456252260
2018-10-02 06:35:06,317 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063506300653
2018-10-02 06:35:06,354 [salt.minion      :1431][INFO    ][7114] Starting a new job with PID 7114
2018-10-02 06:35:06,388 [salt.minion      :1708][INFO    ][7114] Returning information for job: 20181002063506300653
2018-10-02 06:35:16,463 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063516449171
2018-10-02 06:35:16,493 [salt.minion      :1431][INFO    ][7178] Starting a new job with PID 7178
2018-10-02 06:35:16,509 [salt.minion      :1708][INFO    ][7178] Returning information for job: 20181002063516449171
2018-10-02 06:35:26,586 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063526570562
2018-10-02 06:35:26,614 [salt.minion      :1431][INFO    ][7184] Starting a new job with PID 7184
2018-10-02 06:35:26,645 [salt.minion      :1708][INFO    ][7184] Returning information for job: 20181002063526570562
2018-10-02 06:35:36,677 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063536661485
2018-10-02 06:35:36,706 [salt.minion      :1431][INFO    ][7216] Starting a new job with PID 7216
2018-10-02 06:35:36,731 [salt.minion      :1708][INFO    ][7216] Returning information for job: 20181002063536661485
2018-10-02 06:35:46,877 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063546863242
2018-10-02 06:35:46,895 [salt.minion      :1431][INFO    ][7221] Starting a new job with PID 7221
2018-10-02 06:35:46,912 [salt.minion      :1708][INFO    ][7221] Returning information for job: 20181002063546863242
2018-10-02 06:35:57,004 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063556988305
2018-10-02 06:35:57,039 [salt.minion      :1431][INFO    ][7226] Starting a new job with PID 7226
2018-10-02 06:35:57,067 [salt.minion      :1708][INFO    ][7226] Returning information for job: 20181002063556988305
2018-10-02 06:36:07,133 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063607116589
2018-10-02 06:36:07,176 [salt.minion      :1431][INFO    ][7258] Starting a new job with PID 7258
2018-10-02 06:36:07,204 [salt.minion      :1708][INFO    ][7258] Returning information for job: 20181002063607116589
2018-10-02 06:36:17,182 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063617165096
2018-10-02 06:36:17,210 [salt.minion      :1431][INFO    ][7263] Starting a new job with PID 7263
2018-10-02 06:36:17,239 [salt.minion      :1708][INFO    ][7263] Returning information for job: 20181002063617165096
2018-10-02 06:36:27,249 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063627233984
2018-10-02 06:36:27,277 [salt.minion      :1431][INFO    ][7268] Starting a new job with PID 7268
2018-10-02 06:36:27,304 [salt.minion      :1708][INFO    ][7268] Returning information for job: 20181002063627233984
2018-10-02 06:36:37,350 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063637333900
2018-10-02 06:36:37,380 [salt.minion      :1431][INFO    ][7309] Starting a new job with PID 7309
2018-10-02 06:36:37,409 [salt.minion      :1708][INFO    ][7309] Returning information for job: 20181002063637333900
2018-10-02 06:36:47,519 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063647504679
2018-10-02 06:36:47,546 [salt.minion      :1431][INFO    ][7451] Starting a new job with PID 7451
2018-10-02 06:36:47,580 [salt.minion      :1708][INFO    ][7451] Returning information for job: 20181002063647504679
2018-10-02 06:36:57,690 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063657674736
2018-10-02 06:36:57,706 [salt.minion      :1431][INFO    ][7597] Starting a new job with PID 7597
2018-10-02 06:36:57,726 [salt.minion      :1708][INFO    ][7597] Returning information for job: 20181002063657674736
2018-10-02 06:37:07,808 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063707792980
2018-10-02 06:37:07,831 [salt.minion      :1431][INFO    ][8190] Starting a new job with PID 8190
2018-10-02 06:37:07,873 [salt.minion      :1708][INFO    ][8190] Returning information for job: 20181002063707792980
2018-10-02 06:37:17,910 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063717894838
2018-10-02 06:37:17,924 [salt.minion      :1431][INFO    ][12119] Starting a new job with PID 12119
2018-10-02 06:37:17,937 [salt.minion      :1708][INFO    ][12119] Returning information for job: 20181002063717894838
2018-10-02 06:37:27,990 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063727976558
2018-10-02 06:37:28,012 [salt.minion      :1431][INFO    ][14187] Starting a new job with PID 14187
2018-10-02 06:37:28,037 [salt.minion      :1708][INFO    ][14187] Returning information for job: 20181002063727976558
2018-10-02 06:37:38,093 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063738078088
2018-10-02 06:37:38,121 [salt.minion      :1431][INFO    ][16151] Starting a new job with PID 16151
2018-10-02 06:37:38,158 [salt.minion      :1708][INFO    ][16151] Returning information for job: 20181002063738078088
2018-10-02 06:37:48,281 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063748267026
2018-10-02 06:37:48,295 [salt.minion      :1431][INFO    ][21795] Starting a new job with PID 21795
2018-10-02 06:37:48,309 [salt.minion      :1708][INFO    ][21795] Returning information for job: 20181002063748267026
2018-10-02 06:37:58,332 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002063758318121
2018-10-02 06:37:58,351 [salt.minion      :1431][INFO    ][23809] Starting a new job with PID 23809
2018-10-02 06:37:58,366 [salt.minion      :1708][INFO    ][23809] Returning information for job: 20181002063758318121
2018-10-02 06:37:58,618 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6774] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 06:37:58,685 [salt.minion      :1708][INFO    ][6774] Returning information for job: 20181002063108839103
2018-10-02 06:53:32,910 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command test.ping with jid 20181002065332902062
2018-10-02 06:53:32,942 [salt.minion      :1431][INFO    ][23888] Starting a new job with PID 23888
2018-10-02 06:53:32,984 [salt.minion      :1708][INFO    ][23888] Returning information for job: 20181002065332902062
2018-10-02 06:54:33,003 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command state.sls with jid 20181002065432993856
2018-10-02 06:54:33,027 [salt.minion      :1431][INFO    ][23893] Starting a new job with PID 23893
2018-10-02 06:54:37,077 [salt.state       :905 ][INFO    ][23893] Loading fresh modules for state activity
2018-10-02 06:54:37,155 [salt.fileclient  :1215][INFO    ][23893] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-10-02 06:54:37,199 [salt.fileclient  :1215][INFO    ][23893] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-10-02 06:54:38,018 [salt.state       :1770][INFO    ][23893] Running state [keepalived] at time 06:54:38.018749
2018-10-02 06:54:38,029 [salt.state       :1803][INFO    ][23893] Executing state pkg.installed for [keepalived]
2018-10-02 06:54:38,030 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 06:54:38,095 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002065438084125
2018-10-02 06:54:38,123 [salt.minion      :1431][INFO    ][23909] Starting a new job with PID 23909
2018-10-02 06:54:38,147 [salt.minion      :1708][INFO    ][23909] Returning information for job: 20181002065438084125
2018-10-02 06:54:38,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-10-02 06:54:38,688 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-02 06:54:46,530 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 06:54:46,570 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-10-02 06:54:48,258 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002065448245855
2018-10-02 06:54:48,283 [salt.minion      :1431][INFO    ][24346] Starting a new job with PID 24346
2018-10-02 06:54:48,313 [salt.minion      :1708][INFO    ][24346] Returning information for job: 20181002065448245855
2018-10-02 06:54:56,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 06:54:56,107 [salt.state       :290 ][INFO    ][23893] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-10-02 06:54:56,138 [salt.state       :905 ][INFO    ][23893] Loading fresh modules for state activity
2018-10-02 06:54:56,182 [salt.state       :1941][INFO    ][23893] Completed state [keepalived] at time 06:54:56.182043 duration_in_ms=18163.294
2018-10-02 06:54:56,188 [salt.state       :1770][INFO    ][23893] Running state [lsof] at time 06:54:56.188840
2018-10-02 06:54:56,189 [salt.state       :1803][INFO    ][23893] Executing state pkg.installed for [lsof]
2018-10-02 06:54:56,695 [salt.state       :290 ][INFO    ][23893] All specified packages are already installed
2018-10-02 06:54:56,695 [salt.state       :1941][INFO    ][23893] Completed state [lsof] at time 06:54:56.695776 duration_in_ms=506.936
2018-10-02 06:54:56,698 [salt.state       :1770][INFO    ][23893] Running state [/etc/keepalived/keepalived.conf] at time 06:54:56.698536
2018-10-02 06:54:56,698 [salt.state       :1803][INFO    ][23893] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-02 06:54:56,724 [salt.fileclient  :1215][INFO    ][23893] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-10-02 06:54:56,796 [salt.state       :290 ][INFO    ][23893] File changed:
New file
2018-10-02 06:54:56,797 [salt.state       :1941][INFO    ][23893] Completed state [/etc/keepalived/keepalived.conf] at time 06:54:56.797395 duration_in_ms=98.858
2018-10-02 06:54:56,799 [salt.state       :1770][INFO    ][23893] Running state [keepalived] at time 06:54:56.799330
2018-10-02 06:54:56,800 [salt.state       :1803][INFO    ][23893] Executing state service.running for [keepalived]
2018-10-02 06:54:56,801 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-02 06:54:56,832 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-02 06:54:56,855 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-02 06:54:56,877 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-10-02 06:54:56,978 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-02 06:54:57,009 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-02 06:54:57,029 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23893] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-02 06:54:57,046 [salt.state       :290 ][INFO    ][23893] {'keepalived': True}
2018-10-02 06:54:57,046 [salt.state       :1941][INFO    ][23893] Completed state [keepalived] at time 06:54:57.046822 duration_in_ms=247.493
2018-10-02 06:54:57,048 [salt.minion      :1708][INFO    ][23893] Returning information for job: 20181002065432993856
2018-10-02 06:59:11,413 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command pillar.get with jid 20181002065911405555
2018-10-02 06:59:11,452 [salt.minion      :1431][INFO    ][25278] Starting a new job with PID 25278
2018-10-02 06:59:11,466 [salt.minion      :1708][INFO    ][25278] Returning information for job: 20181002065911405555
2018-10-02 07:13:31,528 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command state.sls with jid 20181002071331519008
2018-10-02 07:13:31,571 [salt.minion      :1431][INFO    ][25323] Starting a new job with PID 25323
2018-10-02 07:13:36,866 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002071336857866
2018-10-02 07:13:36,915 [salt.minion      :1431][INFO    ][25328] Starting a new job with PID 25328
2018-10-02 07:13:36,943 [salt.minion      :1708][INFO    ][25328] Returning information for job: 20181002071336857866
2018-10-02 07:13:37,381 [salt.state       :905 ][INFO    ][25323] Loading fresh modules for state activity
2018-10-02 07:13:37,547 [salt.fileclient  :1215][INFO    ][25323] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-10-02 07:13:38,377 [salt.fileclient  :1215][INFO    ][25323] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-10-02 07:13:38,414 [salt.fileclient  :1215][INFO    ][25323] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-10-02 07:13:39,293 [salt.state       :1770][INFO    ][25323] Running state [memcached] at time 07:13:39.293357
2018-10-02 07:13:39,294 [salt.state       :1803][INFO    ][25323] Executing state pkg.installed for [memcached]
2018-10-02 07:13:39,295 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 07:13:39,866 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-10-02 07:13:40,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-02 07:13:42,099 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 07:13:42,131 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-10-02 07:13:47,039 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002071347027951
2018-10-02 07:13:47,060 [salt.minion      :1431][INFO    ][26081] Starting a new job with PID 26081
2018-10-02 07:13:47,083 [salt.minion      :1708][INFO    ][26081] Returning information for job: 20181002071347027951
2018-10-02 07:13:48,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 07:13:48,514 [salt.state       :290 ][INFO    ][25323] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-10-02 07:13:48,531 [salt.state       :905 ][INFO    ][25323] Loading fresh modules for state activity
2018-10-02 07:13:48,566 [salt.state       :1941][INFO    ][25323] Completed state [memcached] at time 07:13:48.566398 duration_in_ms=9273.042
2018-10-02 07:13:48,570 [salt.state       :1770][INFO    ][25323] Running state [python-memcache] at time 07:13:48.570827
2018-10-02 07:13:48,571 [salt.state       :1803][INFO    ][25323] Executing state pkg.installed for [python-memcache]
2018-10-02 07:13:49,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 07:13:49,164 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-10-02 07:13:52,394 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 07:13:52,453 [salt.state       :290 ][INFO    ][25323] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-10-02 07:13:52,483 [salt.state       :905 ][INFO    ][25323] Loading fresh modules for state activity
2018-10-02 07:13:52,543 [salt.state       :1941][INFO    ][25323] Completed state [python-memcache] at time 07:13:52.543076 duration_in_ms=3972.246
2018-10-02 07:13:52,550 [salt.state       :1770][INFO    ][25323] Running state [/etc/memcached.conf] at time 07:13:52.550445
2018-10-02 07:13:52,551 [salt.state       :1803][INFO    ][25323] Executing state file.managed for [/etc/memcached.conf]
2018-10-02 07:13:52,581 [salt.fileclient  :1215][INFO    ][25323] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-10-02 07:13:52,607 [salt.state       :290 ][INFO    ][25323] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-10-02 07:13:52,614 [salt.state       :1941][INFO    ][25323] Completed state [/etc/memcached.conf] at time 07:13:52.614303 duration_in_ms=63.858
2018-10-02 07:13:52,959 [salt.state       :1770][INFO    ][25323] Running state [memcached] at time 07:13:52.959921
2018-10-02 07:13:52,960 [salt.state       :1803][INFO    ][25323] Executing state service.running for [memcached]
2018-10-02 07:13:52,961 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-02 07:13:52,976 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-02 07:13:52,988 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-02 07:13:52,999 [salt.state       :290 ][INFO    ][25323] The service memcached is already running
2018-10-02 07:13:52,999 [salt.state       :1941][INFO    ][25323] Completed state [memcached] at time 07:13:52.999569 duration_in_ms=39.649
2018-10-02 07:13:53,000 [salt.state       :1770][INFO    ][25323] Running state [memcached] at time 07:13:53.000008
2018-10-02 07:13:53,000 [salt.state       :1803][INFO    ][25323] Executing state service.mod_watch for [memcached]
2018-10-02 07:13:53,001 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-02 07:13:53,013 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25323] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-10-02 07:13:53,031 [salt.state       :290 ][INFO    ][25323] {'memcached': True}
2018-10-02 07:13:53,032 [salt.state       :1941][INFO    ][25323] Completed state [memcached] at time 07:13:53.032538 duration_in_ms=32.53
2018-10-02 07:13:53,035 [salt.minion      :1708][INFO    ][25323] Returning information for job: 20181002071331519008
2018-10-02 07:13:54,239 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command state.sls with jid 20181002071354229011
2018-10-02 07:13:54,272 [salt.minion      :1431][INFO    ][26325] Starting a new job with PID 26325
2018-10-02 07:13:59,684 [salt.state       :905 ][INFO    ][26325] Loading fresh modules for state activity
2018-10-02 07:13:59,695 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002071359689682
2018-10-02 07:13:59,739 [salt.minion      :1431][INFO    ][26332] Starting a new job with PID 26332
2018-10-02 07:13:59,764 [salt.minion      :1708][INFO    ][26332] Returning information for job: 20181002071359689682
2018-10-02 07:13:59,775 [salt.fileclient  :1215][INFO    ][26325] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-10-02 07:13:59,859 [salt.fileclient  :1215][INFO    ][26325] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-10-02 07:14:00,626 [salt.state       :1770][INFO    ][26325] Running state [haproxy] at time 07:14:00.626220
2018-10-02 07:14:00,627 [salt.state       :1803][INFO    ][26325] Executing state pkg.installed for [haproxy]
2018-10-02 07:14:00,627 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 07:14:01,192 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-10-02 07:14:01,435 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-02 07:14:03,103 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 07:14:03,140 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-10-02 07:14:09,788 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002071409777447
2018-10-02 07:14:09,821 [salt.minion      :1431][INFO    ][26991] Starting a new job with PID 26991
2018-10-02 07:14:09,859 [salt.minion      :1708][INFO    ][26991] Returning information for job: 20181002071409777447
2018-10-02 07:14:12,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 07:14:12,210 [salt.state       :290 ][INFO    ][26325] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-10-02 07:14:12,244 [salt.state       :905 ][INFO    ][26325] Loading fresh modules for state activity
2018-10-02 07:14:12,295 [salt.state       :1941][INFO    ][26325] Completed state [haproxy] at time 07:14:12.295087 duration_in_ms=11668.865
2018-10-02 07:14:12,303 [salt.state       :1770][INFO    ][26325] Running state [/etc/default/haproxy] at time 07:14:12.303438
2018-10-02 07:14:12,304 [salt.state       :1803][INFO    ][26325] Executing state file.managed for [/etc/default/haproxy]
2018-10-02 07:14:12,341 [salt.fileclient  :1215][INFO    ][26325] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-10-02 07:14:12,346 [salt.state       :290 ][INFO    ][26325] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-10-02 07:14:12,350 [salt.state       :1941][INFO    ][26325] Completed state [/etc/default/haproxy] at time 07:14:12.350408 duration_in_ms=46.97
2018-10-02 07:14:12,351 [salt.state       :1770][INFO    ][26325] Running state [/etc/haproxy/haproxy.cfg] at time 07:14:12.351236
2018-10-02 07:14:12,351 [salt.state       :1803][INFO    ][26325] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-02 07:14:12,370 [salt.fileclient  :1215][INFO    ][26325] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-10-02 07:14:12,533 [salt.state       :290 ][INFO    ][26325] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 10.167.4.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8777 check
+  server mdb02 10.167.4.33:8777 check
+  server mdb03 10.167.4.34:8777 check
+
+listen panko_api
+  bind 10.167.4.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8977 check
+  server mdb02 10.167.4.33:8977 check
+  server mdb03 10.167.4.34:8977 check
+
+listen gnocchi_api
+  bind 10.167.4.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8041 check
+  server mdb02 10.167.4.33:8041 check
+  server mdb03 10.167.4.34:8041 check
+
+listen aodh-api
+  bind 10.167.4.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 10.167.4.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 10.167.4.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-10-02 07:14:12,542 [salt.state       :1941][INFO    ][26325] Completed state [/etc/haproxy/haproxy.cfg] at time 07:14:12.542370 duration_in_ms=191.133
2018-10-02 07:14:12,542 [salt.state       :1770][INFO    ][26325] Running state [/etc/haproxy/ssl] at time 07:14:12.542885
2018-10-02 07:14:12,543 [salt.state       :1803][INFO    ][26325] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-02 07:14:12,544 [salt.state       :290 ][INFO    ][26325] {'/etc/haproxy/ssl': 'New Dir'}
2018-10-02 07:14:12,544 [salt.state       :1941][INFO    ][26325] Completed state [/etc/haproxy/ssl] at time 07:14:12.544743 duration_in_ms=1.858
2018-10-02 07:14:12,545 [salt.state       :1770][INFO    ][26325] Running state [/etc/haproxy/errors/429.http11] at time 07:14:12.545023
2018-10-02 07:14:12,545 [salt.state       :1803][INFO    ][26325] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-02 07:14:12,567 [salt.fileclient  :1215][INFO    ][26325] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-10-02 07:14:12,574 [salt.state       :290 ][INFO    ][26325] File changed:
New file
2018-10-02 07:14:12,574 [salt.state       :1941][INFO    ][26325] Completed state [/etc/haproxy/errors/429.http11] at time 07:14:12.574693 duration_in_ms=29.67
2018-10-02 07:14:12,575 [salt.state       :1770][INFO    ][26325] Running state [haproxy_status_packages] at time 07:14:12.575824
2018-10-02 07:14:12,576 [salt.state       :1803][INFO    ][26325] Executing state pkg.installed for [haproxy_status_packages]
2018-10-02 07:14:13,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 07:14:13,184 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-10-02 07:14:16,103 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 07:14:16,137 [salt.state       :290 ][INFO    ][26325] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-10-02 07:14:16,152 [salt.state       :905 ][INFO    ][26325] Loading fresh modules for state activity
2018-10-02 07:14:16,182 [salt.state       :1941][INFO    ][26325] Completed state [haproxy_status_packages] at time 07:14:16.182864 duration_in_ms=3607.04
2018-10-02 07:14:16,188 [salt.state       :1770][INFO    ][26325] Running state [/usr/bin/haproxy-status.sh] at time 07:14:16.188419
2018-10-02 07:14:16,188 [salt.state       :1803][INFO    ][26325] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-02 07:14:16,214 [salt.fileclient  :1215][INFO    ][26325] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-10-02 07:14:16,248 [salt.state       :290 ][INFO    ][26325] File changed:
New file
2018-10-02 07:14:16,249 [salt.state       :1941][INFO    ][26325] Completed state [/usr/bin/haproxy-status.sh] at time 07:14:16.249439 duration_in_ms=61.02
2018-10-02 07:14:16,253 [salt.state       :1770][INFO    ][26325] Running state [net.ipv4.ip_nonlocal_bind] at time 07:14:16.253134
2018-10-02 07:14:16,253 [salt.state       :1803][INFO    ][26325] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-02 07:14:16,258 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-10-02 07:14:16,275 [salt.state       :290 ][INFO    ][26325] {'net.ipv4.ip_nonlocal_bind': 1}
2018-10-02 07:14:16,276 [salt.state       :1941][INFO    ][26325] Completed state [net.ipv4.ip_nonlocal_bind] at time 07:14:16.276631 duration_in_ms=23.496
2018-10-02 07:14:16,651 [salt.state       :1770][INFO    ][26325] Running state [haproxy] at time 07:14:16.651056
2018-10-02 07:14:16,651 [salt.state       :1803][INFO    ][26325] Executing state service.running for [haproxy]
2018-10-02 07:14:16,652 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-02 07:14:16,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-02 07:14:16,676 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-02 07:14:16,687 [salt.state       :290 ][INFO    ][26325] The service haproxy is already running
2018-10-02 07:14:16,687 [salt.state       :1941][INFO    ][26325] Completed state [haproxy] at time 07:14:16.687712 duration_in_ms=36.656
2018-10-02 07:14:16,687 [salt.state       :1770][INFO    ][26325] Running state [haproxy] at time 07:14:16.687947
2018-10-02 07:14:16,688 [salt.state       :1803][INFO    ][26325] Executing state service.mod_watch for [haproxy]
2018-10-02 07:14:16,688 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-02 07:14:16,699 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26325] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-10-02 07:14:16,740 [salt.state       :290 ][INFO    ][26325] {'haproxy': True}
2018-10-02 07:14:16,741 [salt.state       :1941][INFO    ][26325] Completed state [haproxy] at time 07:14:16.741313 duration_in_ms=53.364
2018-10-02 07:14:16,742 [salt.minion      :1708][INFO    ][26325] Returning information for job: 20181002071354229011
2018-10-02 07:14:18,603 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command service.status with jid 20181002071418593172
2018-10-02 07:14:18,637 [salt.minion      :1431][INFO    ][27503] Starting a new job with PID 27503
2018-10-02 07:14:19,238 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27503] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-02 07:14:19,258 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27503] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-02 07:14:19,284 [salt.minion      :1708][INFO    ][27503] Returning information for job: 20181002071418593172
2018-10-02 07:14:20,411 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command service.restart with jid 20181002071420404982
2018-10-02 07:14:20,455 [salt.minion      :1431][INFO    ][27511] Starting a new job with PID 27511
2018-10-02 07:14:20,931 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27511] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-02 07:14:20,984 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][27511] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-02 07:14:21,029 [salt.minion      :1708][INFO    ][27511] Returning information for job: 20181002071420404982
2018-10-02 07:28:05,789 [salt.utils.schedule:1375][INFO    ][3219] Running scheduled job: __mine_interval
2018-10-02 07:56:54,160 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command state.sls with jid 20181002075654150223
2018-10-02 07:56:54,192 [salt.minion      :1431][INFO    ][27680] Starting a new job with PID 27680
2018-10-02 07:56:58,965 [salt.state       :905 ][INFO    ][27680] Loading fresh modules for state activity
2018-10-02 07:56:59,044 [salt.fileclient  :1215][INFO    ][27680] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-10-02 07:56:59,088 [salt.fileclient  :1215][INFO    ][27680] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-10-02 07:56:59,118 [salt.fileclient  :1215][INFO    ][27680] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-10-02 07:56:59,183 [salt.fileclient  :1215][INFO    ][27680] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-10-02 07:56:59,275 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002075659262661
2018-10-02 07:56:59,317 [salt.minion      :1431][INFO    ][27693] Starting a new job with PID 27693
2018-10-02 07:56:59,354 [salt.minion      :1708][INFO    ][27693] Returning information for job: 20181002075659262661
2018-10-02 07:57:00,042 [salt.state       :1770][INFO    ][27680] Running state [redis-server] at time 07:57:00.042406
2018-10-02 07:57:00,043 [salt.state       :1803][INFO    ][27680] Executing state pkg.installed for [redis-server]
2018-10-02 07:57:00,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 07:57:00,504 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-10-02 07:57:00,722 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-02 07:57:05,410 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 07:57:05,457 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-10-02 07:57:09,335 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002075709322113
2018-10-02 07:57:09,373 [salt.minion      :1431][INFO    ][28328] Starting a new job with PID 28328
2018-10-02 07:57:09,408 [salt.minion      :1708][INFO    ][28328] Returning information for job: 20181002075709322113
2018-10-02 07:57:12,629 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 07:57:12,702 [salt.state       :290 ][INFO    ][27680] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-10-02 07:57:12,744 [salt.state       :905 ][INFO    ][27680] Loading fresh modules for state activity
2018-10-02 07:57:12,794 [salt.state       :1941][INFO    ][27680] Completed state [redis-server] at time 07:57:12.794135 duration_in_ms=12751.728
2018-10-02 07:57:12,800 [salt.state       :1770][INFO    ][27680] Running state [vm.overcommit_memory] at time 07:57:12.800282
2018-10-02 07:57:12,801 [salt.state       :1803][INFO    ][27680] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-02 07:57:12,806 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-10-02 07:57:12,829 [salt.state       :290 ][INFO    ][27680] {'vm.overcommit_memory': 1}
2018-10-02 07:57:12,830 [salt.state       :1941][INFO    ][27680] Completed state [vm.overcommit_memory] at time 07:57:12.830328 duration_in_ms=30.046
2018-10-02 07:57:12,835 [salt.state       :1770][INFO    ][27680] Running state [/etc/redis/redis.conf] at time 07:57:12.835734
2018-10-02 07:57:12,836 [salt.state       :1803][INFO    ][27680] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-02 07:57:12,873 [salt.fileclient  :1215][INFO    ][27680] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-10-02 07:57:12,940 [salt.state       :290 ][INFO    ][27680] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.34
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -208,6 +208,7 @@
 #    and resynchronize with them.
 #
 # slaveof <masterip> <masterport>
+slaveof 10.167.4.32 6379
 
 # If the master is password protected (using the "requirepass" configuration
 # directive below) it is possible to tell the slave to authenticate before
@@ -505,7 +506,6 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
 appendonly no
 
 # The name of the append only file (default: "appendonly.aof")
@@ -535,9 +535,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-10-02 07:57:12,947 [salt.state       :1941][INFO    ][27680] Completed state [/etc/redis/redis.conf] at time 07:57:12.947114 duration_in_ms=111.379
2018-10-02 07:57:13,344 [salt.state       :1770][INFO    ][27680] Running state [redis-server] at time 07:57:13.344922
2018-10-02 07:57:13,345 [salt.state       :1803][INFO    ][27680] Executing state service.running for [redis-server]
2018-10-02 07:57:13,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-02 07:57:13,365 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-02 07:57:13,378 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-02 07:57:13,393 [salt.state       :290 ][INFO    ][27680] The service redis-server is already running
2018-10-02 07:57:13,394 [salt.state       :1941][INFO    ][27680] Completed state [redis-server] at time 07:57:13.394599 duration_in_ms=49.677
2018-10-02 07:57:13,395 [salt.state       :1770][INFO    ][27680] Running state [redis-server] at time 07:57:13.395150
2018-10-02 07:57:13,395 [salt.state       :1803][INFO    ][27680] Executing state service.mod_watch for [redis-server]
2018-10-02 07:57:13,396 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-02 07:57:13,411 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-10-02 07:57:13,741 [salt.state       :290 ][INFO    ][27680] {'redis-server': True}
2018-10-02 07:57:13,742 [salt.state       :1941][INFO    ][27680] Completed state [redis-server] at time 07:57:13.741871 duration_in_ms=346.72
2018-10-02 07:57:13,745 [salt.state       :1770][INFO    ][27680] Running state [redis-sentinel] at time 07:57:13.745343
2018-10-02 07:57:13,747 [salt.state       :1803][INFO    ][27680] Executing state pkg.installed for [redis-sentinel]
2018-10-02 07:57:14,043 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 07:57:14,091 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-10-02 07:57:19,089 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 07:57:19,152 [salt.state       :290 ][INFO    ][27680] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-10-02 07:57:19,176 [salt.state       :905 ][INFO    ][27680] Loading fresh modules for state activity
2018-10-02 07:57:19,219 [salt.state       :1941][INFO    ][27680] Completed state [redis-sentinel] at time 07:57:19.219269 duration_in_ms=5473.923
2018-10-02 07:57:19,688 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002075719345458
2018-10-02 07:57:19,706 [salt.minion      :1431][INFO    ][28906] Starting a new job with PID 28906
2018-10-02 07:57:19,724 [salt.minion      :1708][INFO    ][28906] Returning information for job: 20181002075719345458
2018-10-02 07:57:19,765 [salt.state       :1770][INFO    ][27680] Running state [/etc/redis/sentinel.conf] at time 07:57:19.765624
2018-10-02 07:57:19,766 [salt.state       :1803][INFO    ][27680] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-02 07:57:19,791 [salt.fileclient  :1215][INFO    ][27680] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-10-02 07:57:19,851 [salt.state       :290 ][INFO    ][27680] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.34
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 10.167.4.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-10-02 07:57:19,852 [salt.state       :1941][INFO    ][27680] Completed state [/etc/redis/sentinel.conf] at time 07:57:19.852015 duration_in_ms=86.391
2018-10-02 07:57:19,852 [salt.state       :1770][INFO    ][27680] Running state [redis-sentinel] at time 07:57:19.852661
2018-10-02 07:57:19,853 [salt.state       :1803][INFO    ][27680] Executing state service.running for [redis-sentinel]
2018-10-02 07:57:19,854 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-02 07:57:19,892 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-02 07:57:19,922 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-02 07:57:19,952 [salt.state       :290 ][INFO    ][27680] The service redis-sentinel is already running
2018-10-02 07:57:19,953 [salt.state       :1941][INFO    ][27680] Completed state [redis-sentinel] at time 07:57:19.953186 duration_in_ms=100.524
2018-10-02 07:57:19,953 [salt.state       :1770][INFO    ][27680] Running state [redis-sentinel] at time 07:57:19.953783
2018-10-02 07:57:19,954 [salt.state       :1803][INFO    ][27680] Executing state service.mod_watch for [redis-sentinel]
2018-10-02 07:57:19,956 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-02 07:57:19,985 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27680] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-10-02 07:57:20,319 [salt.state       :290 ][INFO    ][27680] {'redis-sentinel': True}
2018-10-02 07:57:20,320 [salt.state       :1941][INFO    ][27680] Completed state [redis-sentinel] at time 07:57:20.319966 duration_in_ms=366.183
2018-10-02 07:57:20,323 [salt.minion      :1708][INFO    ][27680] Returning information for job: 20181002075654150223
2018-10-02 07:57:21,063 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command test.ping with jid 20181002075721051996
2018-10-02 07:57:21,089 [salt.minion      :1431][INFO    ][28983] Starting a new job with PID 28983
2018-10-02 07:57:21,137 [salt.minion      :1708][INFO    ][28983] Returning information for job: 20181002075721051996
2018-10-02 08:03:48,821 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command state.sls with jid 20181002080348810965
2018-10-02 08:03:48,849 [salt.minion      :1431][INFO    ][28999] Starting a new job with PID 28999
2018-10-02 08:03:52,836 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-02 08:03:52,912 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-10-02 08:03:52,961 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-10-02 08:03:53,066 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-10-02 08:03:53,108 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-10-02 08:03:53,149 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-10-02 08:03:53,264 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-10-02 08:03:53,360 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-10-02 08:03:53,474 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-10-02 08:03:53,651 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-10-02 08:03:53,721 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-10-02 08:03:53,778 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-10-02 08:03:53,824 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-10-02 08:03:53,853 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080353842765
2018-10-02 08:03:53,889 [salt.minion      :1431][INFO    ][29030] Starting a new job with PID 29030
2018-10-02 08:03:53,926 [salt.minion      :1708][INFO    ][29030] Returning information for job: 20181002080353842765
2018-10-02 08:03:54,576 [salt.state       :1770][INFO    ][28999] Running state [apache2] at time 08:03:54.576642
2018-10-02 08:03:54,577 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [apache2]
2018-10-02 08:03:54,578 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:03:55,102 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-10-02 08:03:55,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-02 08:03:57,492 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:03:57,541 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-10-02 08:04:04,045 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080404027711
2018-10-02 08:04:04,074 [salt.minion      :1431][INFO    ][30007] Starting a new job with PID 30007
2018-10-02 08:04:04,109 [salt.minion      :1708][INFO    ][30007] Returning information for job: 20181002080404027711
2018-10-02 08:04:14,227 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080414214912
2018-10-02 08:04:14,259 [salt.minion      :1431][INFO    ][30466] Starting a new job with PID 30466
2018-10-02 08:04:14,291 [salt.minion      :1708][INFO    ][30466] Returning information for job: 20181002080414214912
2018-10-02 08:04:15,929 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:04:15,989 [salt.state       :290 ][INFO    ][28999] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-10-02 08:04:16,036 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-02 08:04:16,088 [salt.state       :1941][INFO    ][28999] Completed state [apache2] at time 08:04:16.088668 duration_in_ms=21512.026
2018-10-02 08:04:16,096 [salt.state       :1770][INFO    ][28999] Running state [openssl] at time 08:04:16.096570
2018-10-02 08:04:16,097 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [openssl]
2018-10-02 08:04:16,697 [salt.state       :290 ][INFO    ][28999] All specified packages are already installed
2018-10-02 08:04:16,698 [salt.state       :1941][INFO    ][28999] Completed state [openssl] at time 08:04:16.698171 duration_in_ms=601.602
2018-10-02 08:04:16,699 [salt.state       :1770][INFO    ][28999] Running state [a2enmod rewrite] at time 08:04:16.699351
2018-10-02 08:04:16,699 [salt.state       :1803][INFO    ][28999] Executing state cmd.run for [a2enmod rewrite]
2018-10-02 08:04:16,700 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command 'a2enmod rewrite' in directory '/root'
2018-10-02 08:04:16,780 [salt.state       :290 ][INFO    ][28999] {'pid': 30538, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-02 08:04:16,781 [salt.state       :1941][INFO    ][28999] Completed state [a2enmod rewrite] at time 08:04:16.781169 duration_in_ms=81.817
2018-10-02 08:04:16,782 [salt.state       :1770][INFO    ][28999] Running state [libapache2-mod-wsgi] at time 08:04:16.782359
2018-10-02 08:04:16,783 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-02 08:04:16,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:04:16,856 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-10-02 08:04:23,198 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:04:23,262 [salt.state       :290 ][INFO    ][28999] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-10-02 08:04:23,288 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-02 08:04:23,331 [salt.state       :1941][INFO    ][28999] Completed state [libapache2-mod-wsgi] at time 08:04:23.330950 duration_in_ms=6548.59
2018-10-02 08:04:23,334 [salt.state       :1770][INFO    ][28999] Running state [a2enmod wsgi] at time 08:04:23.334449
2018-10-02 08:04:23,334 [salt.state       :1803][INFO    ][28999] Executing state cmd.run for [a2enmod wsgi]
2018-10-02 08:04:23,335 [salt.state       :290 ][INFO    ][28999] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-02 08:04:23,335 [salt.state       :1941][INFO    ][28999] Completed state [a2enmod wsgi] at time 08:04:23.335671 duration_in_ms=1.222
2018-10-02 08:04:23,340 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 08:04:23.340659
2018-10-02 08:04:23,341 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-02 08:04:23,378 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-10-02 08:04:23,428 [salt.state       :290 ][INFO    ][28999] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-10-02 08:04:23,428 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 08:04:23.428426 duration_in_ms=87.768
2018-10-02 08:04:23,428 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 08:04:23.428684
2018-10-02 08:04:23,428 [salt.state       :1803][INFO    ][28999] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-02 08:04:23,429 [salt.state       :290 ][INFO    ][28999] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-02 08:04:23,429 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 08:04:23.429500 duration_in_ms=0.816
2018-10-02 08:04:23,429 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 08:04:23.429731
2018-10-02 08:04:23,429 [salt.state       :1803][INFO    ][28999] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-02 08:04:23,430 [salt.state       :290 ][INFO    ][28999] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-10-02 08:04:23,430 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 08:04:23.430536 duration_in_ms=0.805
2018-10-02 08:04:23,431 [salt.state       :1770][INFO    ][28999] Running state [a2enmod mpm_prefork] at time 08:04:23.431133
2018-10-02 08:04:23,431 [salt.state       :1803][INFO    ][28999] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-02 08:04:23,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-10-02 08:04:23,484 [salt.state       :290 ][INFO    ][28999] {'pid': 30857, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-02 08:04:23,485 [salt.state       :1941][INFO    ][28999] Completed state [a2enmod mpm_prefork] at time 08:04:23.485106 duration_in_ms=53.972
2018-10-02 08:04:23,485 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 08:04:23.485568
2018-10-02 08:04:23,485 [salt.state       :1803][INFO    ][28999] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-02 08:04:23,486 [salt.state       :290 ][INFO    ][28999] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-02 08:04:23,486 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 08:04:23.486684 duration_in_ms=1.116
2018-10-02 08:04:23,486 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 08:04:23.486945
2018-10-02 08:04:23,487 [salt.state       :1803][INFO    ][28999] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-02 08:04:23,487 [salt.state       :290 ][INFO    ][28999] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-10-02 08:04:23,487 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 08:04:23.487794 duration_in_ms=0.849
2018-10-02 08:04:23,489 [salt.state       :1770][INFO    ][28999] Running state [apache_server_service_task] at time 08:04:23.489607
2018-10-02 08:04:23,489 [salt.state       :1803][INFO    ][28999] Executing state test.show_notification for [apache_server_service_task]
2018-10-02 08:04:23,490 [salt.state       :290 ][INFO    ][28999] Running apache.server.service
2018-10-02 08:04:23,490 [salt.state       :1941][INFO    ][28999] Completed state [apache_server_service_task] at time 08:04:23.490523 duration_in_ms=0.916
2018-10-02 08:04:23,491 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/ports.conf] at time 08:04:23.491150
2018-10-02 08:04:23,491 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-02 08:04:23,508 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-10-02 08:04:23,556 [salt.state       :290 ][INFO    ][28999] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-10-02 08:04:23,557 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/ports.conf] at time 08:04:23.556991 duration_in_ms=65.84
2018-10-02 08:04:23,557 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/conf-available/security.conf] at time 08:04:23.557427
2018-10-02 08:04:23,557 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-02 08:04:23,574 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-10-02 08:04:23,622 [salt.state       :290 ][INFO    ][28999] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-10-02 08:04:23,623 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/conf-available/security.conf] at time 08:04:23.622992 duration_in_ms=65.565
2018-10-02 08:04:24,083 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 08:04:24.083699
2018-10-02 08:04:24,084 [salt.state       :1803][INFO    ][28999] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-02 08:04:24,084 [salt.state       :290 ][INFO    ][28999] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-10-02 08:04:24,084 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 08:04:24.084904 duration_in_ms=1.206
2018-10-02 08:04:24,085 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 08:04:24.085377
2018-10-02 08:04:24,085 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-02 08:04:24,102 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-10-02 08:04:24,127 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-10-02 08:04:24,182 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-10-02 08:04:24,202 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-10-02 08:04:24,282 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-10-02 08:04:24,310 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-10-02 08:04:24,341 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-10-02 08:04:24,357 [salt.state       :290 ][INFO    ][28999] File changed:
New file
2018-10-02 08:04:24,357 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 08:04:24.357569 duration_in_ms=272.191
2018-10-02 08:04:24,358 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 08:04:24.358424
2018-10-02 08:04:24,358 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-02 08:04:24,408 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080424399157
2018-10-02 08:04:24,446 [salt.minion      :1431][INFO    ][30903] Starting a new job with PID 30903
2018-10-02 08:04:24,541 [salt.minion      :1708][INFO    ][30903] Returning information for job: 20181002080424399157
2018-10-02 08:04:24,592 [salt.state       :290 ][INFO    ][28999] File changed:
New file
2018-10-02 08:04:24,593 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 08:04:24.593118 duration_in_ms=234.694
2018-10-02 08:04:24,595 [salt.state       :1770][INFO    ][28999] Running state [apache2] at time 08:04:24.595051
2018-10-02 08:04:24,595 [salt.state       :1803][INFO    ][28999] Executing state service.running for [apache2]
2018-10-02 08:04:24,596 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-02 08:04:24,630 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-02 08:04:24,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-02 08:04:24,740 [salt.state       :290 ][INFO    ][28999] The service apache2 is already running
2018-10-02 08:04:24,742 [salt.state       :1941][INFO    ][28999] Completed state [apache2] at time 08:04:24.741968 duration_in_ms=146.916
2018-10-02 08:04:24,743 [salt.state       :1770][INFO    ][28999] Running state [apache2] at time 08:04:24.743182
2018-10-02 08:04:24,744 [salt.state       :1803][INFO    ][28999] Executing state service.mod_watch for [apache2]
2018-10-02 08:04:24,747 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-02 08:04:24,778 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-10-02 08:04:25,051 [salt.state       :290 ][INFO    ][28999] {'apache2': True}
2018-10-02 08:04:25,052 [salt.state       :1941][INFO    ][28999] Completed state [apache2] at time 08:04:25.051939 duration_in_ms=308.756
2018-10-02 08:04:25,054 [salt.state       :1770][INFO    ][28999] Running state [/etc/apache2/conf-enabled/security.conf] at time 08:04:25.054306
2018-10-02 08:04:25,055 [salt.state       :1803][INFO    ][28999] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-02 08:04:25,069 [salt.state       :290 ][INFO    ][28999] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-10-02 08:04:25,070 [salt.state       :1941][INFO    ][28999] Completed state [/etc/apache2/conf-enabled/security.conf] at time 08:04:25.070695 duration_in_ms=16.389
2018-10-02 08:04:25,076 [salt.state       :1770][INFO    ][28999] Running state [gnocchi-common] at time 08:04:25.076737
2018-10-02 08:04:25,078 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [gnocchi-common]
2018-10-02 08:04:25,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:04:25,365 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-10-02 08:04:34,450 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080434436917
2018-10-02 08:04:34,477 [salt.minion      :1431][INFO    ][31185] Starting a new job with PID 31185
2018-10-02 08:04:34,584 [salt.minion      :1708][INFO    ][31185] Returning information for job: 20181002080434436917
2018-10-02 08:04:44,500 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080444483360
2018-10-02 08:04:44,533 [salt.minion      :1431][INFO    ][31413] Starting a new job with PID 31413
2018-10-02 08:04:44,640 [salt.minion      :1708][INFO    ][31413] Returning information for job: 20181002080444483360
2018-10-02 08:04:54,554 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080454542823
2018-10-02 08:04:54,584 [salt.minion      :1431][INFO    ][31667] Starting a new job with PID 31667
2018-10-02 08:04:54,701 [salt.minion      :1708][INFO    ][31667] Returning information for job: 20181002080454542823
2018-10-02 08:05:04,622 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080504610459
2018-10-02 08:05:04,649 [salt.minion      :1431][INFO    ][31892] Starting a new job with PID 31892
2018-10-02 08:05:04,753 [salt.minion      :1708][INFO    ][31892] Returning information for job: 20181002080504610459
2018-10-02 08:05:14,678 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080514666065
2018-10-02 08:05:14,708 [salt.minion      :1431][INFO    ][32125] Starting a new job with PID 32125
2018-10-02 08:05:14,820 [salt.minion      :1708][INFO    ][32125] Returning information for job: 20181002080514666065
2018-10-02 08:05:24,754 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080524741198
2018-10-02 08:05:24,784 [salt.minion      :1431][INFO    ][32378] Starting a new job with PID 32378
2018-10-02 08:05:24,891 [salt.minion      :1708][INFO    ][32378] Returning information for job: 20181002080524741198
2018-10-02 08:05:34,821 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080534808242
2018-10-02 08:05:34,853 [salt.minion      :1431][INFO    ][521] Starting a new job with PID 521
2018-10-02 08:05:34,959 [salt.minion      :1708][INFO    ][521] Returning information for job: 20181002080534808242
2018-10-02 08:05:44,890 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080544878540
2018-10-02 08:05:44,915 [salt.minion      :1431][INFO    ][589] Starting a new job with PID 589
2018-10-02 08:05:45,024 [salt.minion      :1708][INFO    ][589] Returning information for job: 20181002080544878540
2018-10-02 08:05:54,956 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080554946063
2018-10-02 08:05:54,987 [salt.minion      :1431][INFO    ][921] Starting a new job with PID 921
2018-10-02 08:05:55,094 [salt.minion      :1708][INFO    ][921] Returning information for job: 20181002080554946063
2018-10-02 08:06:05,031 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080605018380
2018-10-02 08:06:05,059 [salt.minion      :1431][INFO    ][1145] Starting a new job with PID 1145
2018-10-02 08:06:05,154 [salt.minion      :1708][INFO    ][1145] Returning information for job: 20181002080605018380
2018-10-02 08:06:15,100 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080615088265
2018-10-02 08:06:15,136 [salt.minion      :1431][INFO    ][1447] Starting a new job with PID 1447
2018-10-02 08:06:15,224 [salt.minion      :1708][INFO    ][1447] Returning information for job: 20181002080615088265
2018-10-02 08:06:23,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:06:23,908 [salt.state       :290 ][INFO    ][28999] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp4'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.1-1.0~u16.04+mcp16'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp5'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp6'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-10-02 08:06:23,953 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-02 08:06:24,006 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi-common] at time 08:06:24.006667 duration_in_ms=118929.931
2018-10-02 08:06:24,011 [salt.state       :1770][INFO    ][28999] Running state [gnocchi_ssl_mysql] at time 08:06:24.011458
2018-10-02 08:06:24,012 [salt.state       :1803][INFO    ][28999] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-10-02 08:06:24,012 [salt.state       :290 ][INFO    ][28999] Running gnocchi._ssl.mysql
2018-10-02 08:06:24,013 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi_ssl_mysql] at time 08:06:24.012961 duration_in_ms=1.503
2018-10-02 08:06:24,016 [salt.state       :1770][INFO    ][28999] Running state [/etc/gnocchi/gnocchi.conf] at time 08:06:24.016624
2018-10-02 08:06:24,017 [salt.state       :1803][INFO    ][28999] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-10-02 08:06:24,057 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-10-02 08:06:24,177 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-10-02 08:06:24,196 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-10-02 08:06:24,224 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-10-02 08:06:24,263 [salt.fileclient  :1215][INFO    ][28999] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-10-02 08:06:24,272 [salt.state       :290 ][INFO    ][28999] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@10.167.4.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -515,153 +316,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +480,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://10.167.4.34:6379

2018-10-02 08:06:24,280 [salt.state       :1941][INFO    ][28999] Completed state [/etc/gnocchi/gnocchi.conf] at time 08:06:24.280325 duration_in_ms=263.701
2018-10-02 08:06:24,293 [salt.state       :1770][INFO    ][28999] Running state [gnocchi-api] at time 08:06:24.293115
2018-10-02 08:06:24,293 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [gnocchi-api]
2018-10-02 08:06:25,171 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080625160849
2018-10-02 08:06:25,208 [salt.minion      :1431][INFO    ][1721] Starting a new job with PID 1721
2018-10-02 08:06:25,243 [salt.minion      :1708][INFO    ][1721] Returning information for job: 20181002080625160849
2018-10-02 08:06:25,763 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:06:25,824 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-10-02 08:06:35,200 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080635185720
2018-10-02 08:06:35,230 [salt.minion      :1431][INFO    ][1944] Starting a new job with PID 1944
2018-10-02 08:06:35,273 [salt.minion      :1708][INFO    ][1944] Returning information for job: 20181002080635185720
2018-10-02 08:06:45,232 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080645221198
2018-10-02 08:06:45,266 [salt.minion      :1431][INFO    ][2559] Starting a new job with PID 2559
2018-10-02 08:06:45,302 [salt.minion      :1708][INFO    ][2559] Returning information for job: 20181002080645221198
2018-10-02 08:06:47,273 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:06:47,359 [salt.state       :290 ][INFO    ][28999] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp10'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-10-02 08:06:47,403 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-02 08:06:47,445 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi-api] at time 08:06:47.445143 duration_in_ms=23152.026
2018-10-02 08:06:47,458 [salt.state       :1770][INFO    ][28999] Running state [gnocchi-metricd] at time 08:06:47.458543
2018-10-02 08:06:47,459 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [gnocchi-metricd]
2018-10-02 08:06:48,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:06:48,601 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-10-02 08:06:53,259 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:06:53,323 [salt.state       :290 ][INFO    ][28999] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-10-02 08:06:53,369 [salt.state       :905 ][INFO    ][28999] Loading fresh modules for state activity
2018-10-02 08:06:53,538 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi-metricd] at time 08:06:53.538809 duration_in_ms=6080.266
2018-10-02 08:06:53,543 [salt.state       :1770][INFO    ][28999] Running state [python-memcache] at time 08:06:53.543482
2018-10-02 08:06:53,543 [salt.state       :1803][INFO    ][28999] Executing state pkg.installed for [python-memcache]
2018-10-02 08:06:54,167 [salt.state       :290 ][INFO    ][28999] All specified packages are already installed
2018-10-02 08:06:54,168 [salt.state       :1941][INFO    ][28999] Completed state [python-memcache] at time 08:06:54.168251 duration_in_ms=624.767
2018-10-02 08:06:54,171 [salt.state       :1770][INFO    ][28999] Running state [gnocchi-upgrade] at time 08:06:54.171631
2018-10-02 08:06:54,172 [salt.state       :1803][INFO    ][28999] Executing state cmd.run for [gnocchi-upgrade]
2018-10-02 08:06:54,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-10-02 08:06:55,272 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080655262718
2018-10-02 08:06:55,306 [salt.minion      :1431][INFO    ][2909] Starting a new job with PID 2909
2018-10-02 08:06:55,325 [salt.minion      :1708][INFO    ][2909] Returning information for job: 20181002080655262718
2018-10-02 08:06:56,406 [salt.state       :290 ][INFO    ][28999] {'pid': 2893, 'retcode': 0, 'stderr': '2018-10-02 08:06:55,820 [2899] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-10-02 08:06:56,130 [2899] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@10.167.4.23/gnocchi?charset=utf8\n2018-10-02 08:06:56,312 [2899] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=10.167.4.34,port=6379,db=0>>>\n2018-10-02 08:06:56,314 [2899] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-10-02 08:06:56,409 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi-upgrade] at time 08:06:56.409620 duration_in_ms=2237.988
2018-10-02 08:06:56,414 [salt.state       :1770][INFO    ][28999] Running state [wsgi_gnocchi] at time 08:06:56.414055
2018-10-02 08:06:56,414 [salt.state       :1803][INFO    ][28999] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-10-02 08:06:56,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-10-02 08:06:56,475 [salt.state       :290 ][INFO    ][28999] {'new': 'wsgi_gnocchi', 'old': None}
2018-10-02 08:06:56,476 [salt.state       :1941][INFO    ][28999] Completed state [wsgi_gnocchi] at time 08:06:56.476468 duration_in_ms=62.413
2018-10-02 08:06:56,481 [salt.state       :1770][INFO    ][28999] Running state [apache2] at time 08:06:56.480975
2018-10-02 08:06:56,481 [salt.state       :1803][INFO    ][28999] Executing state service.running for [apache2]
2018-10-02 08:06:56,483 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-02 08:06:56,504 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-02 08:06:56,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-10-02 08:06:57,839 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-02 08:06:57,865 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-02 08:06:57,901 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-02 08:06:57,924 [salt.state       :290 ][INFO    ][28999] {'apache2': True}
2018-10-02 08:06:57,924 [salt.state       :1941][INFO    ][28999] Completed state [apache2] at time 08:06:57.924651 duration_in_ms=1443.676
2018-10-02 08:06:57,925 [salt.state       :1770][INFO    ][28999] Running state [gnocchi-metricd] at time 08:06:57.925645
2018-10-02 08:06:57,925 [salt.state       :1803][INFO    ][28999] Executing state service.running for [gnocchi-metricd]
2018-10-02 08:06:57,926 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-10-02 08:06:57,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-02 08:06:57,986 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-02 08:06:58,006 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-10-02 08:06:58,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-02 08:06:58,092 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-02 08:06:58,122 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-02 08:06:58,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-10-02 08:06:58,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28999] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-02 08:06:58,700 [salt.state       :290 ][INFO    ][28999] {'gnocchi-metricd': True}
2018-10-02 08:06:58,701 [salt.state       :1941][INFO    ][28999] Completed state [gnocchi-metricd] at time 08:06:58.700999 duration_in_ms=775.354
2018-10-02 08:06:58,703 [salt.minion      :1708][INFO    ][28999] Returning information for job: 20181002080348810965
2018-10-02 08:06:59,450 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command test.ping with jid 20181002080659442450
2018-10-02 08:06:59,475 [salt.minion      :1431][INFO    ][3173] Starting a new job with PID 3173
2018-10-02 08:06:59,518 [salt.minion      :1708][INFO    ][3173] Returning information for job: 20181002080659442450
2018-10-02 08:07:46,270 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command state.sls with jid 20181002080746260677
2018-10-02 08:07:46,303 [salt.minion      :1431][INFO    ][3193] Starting a new job with PID 3193
2018-10-02 08:07:50,309 [salt.state       :905 ][INFO    ][3193] Loading fresh modules for state activity
2018-10-02 08:07:50,397 [salt.fileclient  :1215][INFO    ][3193] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-10-02 08:07:50,440 [salt.fileclient  :1215][INFO    ][3193] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-10-02 08:07:51,158 [salt.fileclient  :1215][INFO    ][3193] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-10-02 08:07:51,325 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080751315260
2018-10-02 08:07:51,352 [salt.minion      :1431][INFO    ][3225] Starting a new job with PID 3225
2018-10-02 08:07:51,377 [salt.minion      :1708][INFO    ][3225] Returning information for job: 20181002080751315260
2018-10-02 08:07:52,774 [salt.state       :1770][INFO    ][3193] Running state [apache2] at time 08:07:52.774465
2018-10-02 08:07:52,774 [salt.state       :1803][INFO    ][3193] Executing state pkg.installed for [apache2]
2018-10-02 08:07:52,775 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:07:53,299 [salt.state       :290 ][INFO    ][3193] All specified packages are already installed
2018-10-02 08:07:53,299 [salt.state       :1941][INFO    ][3193] Completed state [apache2] at time 08:07:53.299814 duration_in_ms=525.35
2018-10-02 08:07:53,300 [salt.state       :1770][INFO    ][3193] Running state [openssl] at time 08:07:53.300180
2018-10-02 08:07:53,300 [salt.state       :1803][INFO    ][3193] Executing state pkg.installed for [openssl]
2018-10-02 08:07:53,308 [salt.state       :290 ][INFO    ][3193] All specified packages are already installed
2018-10-02 08:07:53,308 [salt.state       :1941][INFO    ][3193] Completed state [openssl] at time 08:07:53.308483 duration_in_ms=8.303
2018-10-02 08:07:53,309 [salt.state       :1770][INFO    ][3193] Running state [a2enmod rewrite] at time 08:07:53.308998
2018-10-02 08:07:53,309 [salt.state       :1803][INFO    ][3193] Executing state cmd.run for [a2enmod rewrite]
2018-10-02 08:07:53,309 [salt.state       :290 ][INFO    ][3193] /etc/apache2/mods-enabled/rewrite.load exists
2018-10-02 08:07:53,309 [salt.state       :1941][INFO    ][3193] Completed state [a2enmod rewrite] at time 08:07:53.309821 duration_in_ms=0.823
2018-10-02 08:07:53,310 [salt.state       :1770][INFO    ][3193] Running state [libapache2-mod-wsgi] at time 08:07:53.310279
2018-10-02 08:07:53,310 [salt.state       :1803][INFO    ][3193] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-02 08:07:53,318 [salt.state       :290 ][INFO    ][3193] All specified packages are already installed
2018-10-02 08:07:53,318 [salt.state       :1941][INFO    ][3193] Completed state [libapache2-mod-wsgi] at time 08:07:53.318575 duration_in_ms=8.296
2018-10-02 08:07:53,319 [salt.state       :1770][INFO    ][3193] Running state [a2enmod wsgi] at time 08:07:53.318977
2018-10-02 08:07:53,319 [salt.state       :1803][INFO    ][3193] Executing state cmd.run for [a2enmod wsgi]
2018-10-02 08:07:53,319 [salt.state       :290 ][INFO    ][3193] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-02 08:07:53,319 [salt.state       :1941][INFO    ][3193] Completed state [a2enmod wsgi] at time 08:07:53.319778 duration_in_ms=0.801
2018-10-02 08:07:53,325 [salt.state       :1770][INFO    ][3193] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 08:07:53.325019
2018-10-02 08:07:53,325 [salt.state       :1803][INFO    ][3193] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-02 08:07:53,568 [salt.state       :290 ][INFO    ][3193] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-10-02 08:07:53,569 [salt.state       :1941][INFO    ][3193] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 08:07:53.568896 duration_in_ms=243.876
2018-10-02 08:07:53,569 [salt.state       :1770][INFO    ][3193] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 08:07:53.569399
2018-10-02 08:07:53,569 [salt.state       :1803][INFO    ][3193] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-02 08:07:53,570 [salt.state       :290 ][INFO    ][3193] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-02 08:07:53,571 [salt.state       :1941][INFO    ][3193] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 08:07:53.571116 duration_in_ms=1.717
2018-10-02 08:07:53,571 [salt.state       :1770][INFO    ][3193] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 08:07:53.571577
2018-10-02 08:07:53,572 [salt.state       :1803][INFO    ][3193] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-02 08:07:53,572 [salt.state       :290 ][INFO    ][3193] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-10-02 08:07:53,573 [salt.state       :1941][INFO    ][3193] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 08:07:53.573234 duration_in_ms=1.657
2018-10-02 08:07:53,574 [salt.state       :1770][INFO    ][3193] Running state [a2enmod mpm_prefork] at time 08:07:53.574489
2018-10-02 08:07:53,575 [salt.state       :1803][INFO    ][3193] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-02 08:07:53,575 [salt.state       :290 ][INFO    ][3193] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-10-02 08:07:53,576 [salt.state       :1941][INFO    ][3193] Completed state [a2enmod mpm_prefork] at time 08:07:53.576237 duration_in_ms=1.748
2018-10-02 08:07:53,576 [salt.state       :1770][INFO    ][3193] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 08:07:53.576725
2018-10-02 08:07:53,577 [salt.state       :1803][INFO    ][3193] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-02 08:07:53,577 [salt.state       :290 ][INFO    ][3193] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-02 08:07:53,578 [salt.state       :1941][INFO    ][3193] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 08:07:53.578284 duration_in_ms=1.559
2018-10-02 08:07:53,578 [salt.state       :1770][INFO    ][3193] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 08:07:53.578746
2018-10-02 08:07:53,579 [salt.state       :1803][INFO    ][3193] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-02 08:07:53,579 [salt.state       :290 ][INFO    ][3193] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-10-02 08:07:53,580 [salt.state       :1941][INFO    ][3193] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 08:07:53.580118 duration_in_ms=1.372
2018-10-02 08:07:53,581 [salt.state       :1770][INFO    ][3193] Running state [apache_server_service_task] at time 08:07:53.581639
2018-10-02 08:07:53,582 [salt.state       :1803][INFO    ][3193] Executing state test.show_notification for [apache_server_service_task]
2018-10-02 08:07:53,582 [salt.state       :290 ][INFO    ][3193] Running apache.server.service
2018-10-02 08:07:53,583 [salt.state       :1941][INFO    ][3193] Completed state [apache_server_service_task] at time 08:07:53.583057 duration_in_ms=1.418
2018-10-02 08:07:53,583 [salt.state       :1770][INFO    ][3193] Running state [/etc/apache2/ports.conf] at time 08:07:53.583801
2018-10-02 08:07:53,584 [salt.state       :1803][INFO    ][3193] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-02 08:07:53,662 [salt.state       :290 ][INFO    ][3193] File /etc/apache2/ports.conf is in the correct state
2018-10-02 08:07:53,662 [salt.state       :1941][INFO    ][3193] Completed state [/etc/apache2/ports.conf] at time 08:07:53.662681 duration_in_ms=78.881
2018-10-02 08:07:53,663 [salt.state       :1770][INFO    ][3193] Running state [/etc/apache2/conf-available/security.conf] at time 08:07:53.663247
2018-10-02 08:07:53,663 [salt.state       :1803][INFO    ][3193] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-02 08:07:53,730 [salt.state       :290 ][INFO    ][3193] File /etc/apache2/conf-available/security.conf is in the correct state
2018-10-02 08:07:53,731 [salt.state       :1941][INFO    ][3193] Completed state [/etc/apache2/conf-available/security.conf] at time 08:07:53.731174 duration_in_ms=67.927
2018-10-02 08:07:53,737 [salt.state       :1770][INFO    ][3193] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 08:07:53.737757
2018-10-02 08:07:53,738 [salt.state       :1803][INFO    ][3193] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-02 08:07:53,738 [salt.state       :290 ][INFO    ][3193] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-10-02 08:07:53,738 [salt.state       :1941][INFO    ][3193] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 08:07:53.738788 duration_in_ms=1.03
2018-10-02 08:07:53,739 [salt.state       :1770][INFO    ][3193] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 08:07:53.739323
2018-10-02 08:07:53,739 [salt.state       :1803][INFO    ][3193] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-02 08:07:53,996 [salt.state       :290 ][INFO    ][3193] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-10-02 08:07:53,997 [salt.state       :1941][INFO    ][3193] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 08:07:53.997675 duration_in_ms=258.351
2018-10-02 08:07:53,998 [salt.state       :1770][INFO    ][3193] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 08:07:53.998845
2018-10-02 08:07:53,999 [salt.state       :1803][INFO    ][3193] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-02 08:07:54,282 [salt.state       :290 ][INFO    ][3193] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-10-02 08:07:54,283 [salt.state       :1941][INFO    ][3193] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 08:07:54.283049 duration_in_ms=284.201
2018-10-02 08:07:54,285 [salt.state       :1770][INFO    ][3193] Running state [apache2] at time 08:07:54.285358
2018-10-02 08:07:54,285 [salt.state       :1803][INFO    ][3193] Executing state service.running for [apache2]
2018-10-02 08:07:54,287 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-02 08:07:54,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-02 08:07:54,375 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-02 08:07:54,407 [salt.state       :290 ][INFO    ][3193] The service apache2 is already running
2018-10-02 08:07:54,408 [salt.state       :1941][INFO    ][3193] Completed state [apache2] at time 08:07:54.408191 duration_in_ms=122.832
2018-10-02 08:07:54,410 [salt.state       :1770][INFO    ][3193] Running state [/etc/apache2/conf-enabled/security.conf] at time 08:07:54.410133
2018-10-02 08:07:54,411 [salt.state       :1803][INFO    ][3193] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-02 08:07:54,415 [salt.state       :290 ][INFO    ][3193] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-10-02 08:07:54,416 [salt.state       :1941][INFO    ][3193] Completed state [/etc/apache2/conf-enabled/security.conf] at time 08:07:54.416316 duration_in_ms=6.183
2018-10-02 08:07:54,418 [salt.state       :1770][INFO    ][3193] Running state [panko-api] at time 08:07:54.418030
2018-10-02 08:07:54,418 [salt.state       :1803][INFO    ][3193] Executing state pkg.installed for [panko-api]
2018-10-02 08:07:54,454 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-10-02 08:07:54,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-02 08:07:56,995 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:07:57,027 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-10-02 08:08:01,352 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002080801340540
2018-10-02 08:08:01,397 [salt.minion      :1431][INFO    ][3720] Starting a new job with PID 3720
2018-10-02 08:08:01,439 [salt.minion      :1708][INFO    ][3720] Returning information for job: 20181002080801340540
2018-10-02 08:08:04,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:08:04,195 [salt.state       :290 ][INFO    ][3193] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-10-02 08:08:04,231 [salt.state       :905 ][INFO    ][3193] Loading fresh modules for state activity
2018-10-02 08:08:04,267 [salt.state       :1941][INFO    ][3193] Completed state [panko-api] at time 08:08:04.267068 duration_in_ms=9849.038
2018-10-02 08:08:04,273 [salt.state       :1770][INFO    ][3193] Running state [panko_ssl_mysql] at time 08:08:04.272926
2018-10-02 08:08:04,274 [salt.state       :1803][INFO    ][3193] Executing state test.show_notification for [panko_ssl_mysql]
2018-10-02 08:08:04,275 [salt.state       :290 ][INFO    ][3193] Running panko._ssl.mysql
2018-10-02 08:08:04,276 [salt.state       :1941][INFO    ][3193] Completed state [panko_ssl_mysql] at time 08:08:04.276614 duration_in_ms=3.689
2018-10-02 08:08:04,281 [salt.state       :1770][INFO    ][3193] Running state [/etc/panko/panko.conf] at time 08:08:04.281447
2018-10-02 08:08:04,282 [salt.state       :1803][INFO    ][3193] Executing state file.managed for [/etc/panko/panko.conf]
2018-10-02 08:08:04,320 [salt.fileclient  :1215][INFO    ][3193] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-10-02 08:08:04,391 [salt.fileclient  :1215][INFO    ][3193] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-10-02 08:08:04,417 [salt.fileclient  :1215][INFO    ][3193] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-10-02 08:08:04,528 [salt.state       :290 ][INFO    ][3193] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@10.167.4.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -466,110 +481,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-10-02 08:08:04,538 [salt.state       :1941][INFO    ][3193] Completed state [/etc/panko/panko.conf] at time 08:08:04.538533 duration_in_ms=257.086
2018-10-02 08:08:04,540 [salt.state       :1770][INFO    ][3193] Running state [panko-dbsync] at time 08:08:04.540388
2018-10-02 08:08:04,540 [salt.state       :1803][INFO    ][3193] Executing state cmd.run for [panko-dbsync]
2018-10-02 08:08:04,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command 'panko-dbsync' in directory '/root'
2018-10-02 08:08:05,779 [salt.state       :290 ][INFO    ][3193] {'pid': 3825, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-02 08:08:05,780 [salt.state       :1941][INFO    ][3193] Completed state [panko-dbsync] at time 08:08:05.780594 duration_in_ms=1240.206
2018-10-02 08:08:05,789 [salt.state       :1770][INFO    ][3193] Running state [wsgi_panko] at time 08:08:05.788986
2018-10-02 08:08:05,789 [salt.state       :1803][INFO    ][3193] Executing state apache_site.enabled for [wsgi_panko]
2018-10-02 08:08:05,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-10-02 08:08:05,884 [salt.state       :290 ][INFO    ][3193] {'new': 'wsgi_panko', 'old': None}
2018-10-02 08:08:05,885 [salt.state       :1941][INFO    ][3193] Completed state [wsgi_panko] at time 08:08:05.885025 duration_in_ms=96.039
2018-10-02 08:08:06,388 [salt.state       :1770][INFO    ][3193] Running state [apache2] at time 08:08:06.387971
2018-10-02 08:08:06,388 [salt.state       :1803][INFO    ][3193] Executing state service.running for [apache2]
2018-10-02 08:08:06,389 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-02 08:08:06,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-02 08:08:06,456 [salt.state       :290 ][INFO    ][3193] The service apache2 is already running
2018-10-02 08:08:06,457 [salt.state       :1941][INFO    ][3193] Completed state [apache2] at time 08:08:06.457464 duration_in_ms=69.493
2018-10-02 08:08:06,458 [salt.state       :1770][INFO    ][3193] Running state [apache2] at time 08:08:06.458015
2018-10-02 08:08:06,458 [salt.state       :1803][INFO    ][3193] Executing state service.mod_watch for [apache2]
2018-10-02 08:08:06,460 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-02 08:08:06,489 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3193] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-02 08:08:09,004 [salt.state       :290 ][INFO    ][3193] {'apache2': True}
2018-10-02 08:08:09,005 [salt.state       :1941][INFO    ][3193] Completed state [apache2] at time 08:08:09.005395 duration_in_ms=2547.381
2018-10-02 08:08:09,008 [salt.minion      :1708][INFO    ][3193] Returning information for job: 20181002080746260677
2018-10-02 08:08:09,752 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command test.ping with jid 20181002080809744946
2018-10-02 08:08:09,770 [salt.minion      :1431][INFO    ][3982] Starting a new job with PID 3982
2018-10-02 08:08:09,804 [salt.minion      :1708][INFO    ][3982] Returning information for job: 20181002080809744946
2018-10-02 08:11:39,498 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command state.sls with jid 20181002081139487113
2018-10-02 08:11:39,525 [salt.minion      :1431][INFO    ][3999] Starting a new job with PID 3999
2018-10-02 08:11:43,514 [salt.state       :905 ][INFO    ][3999] Loading fresh modules for state activity
2018-10-02 08:11:43,586 [salt.fileclient  :1215][INFO    ][3999] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-10-02 08:11:43,622 [salt.fileclient  :1215][INFO    ][3999] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-10-02 08:11:43,773 [salt.fileclient  :1215][INFO    ][3999] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-10-02 08:11:43,820 [salt.fileclient  :1215][INFO    ][3999] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-10-02 08:11:44,536 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081144523767
2018-10-02 08:11:44,573 [salt.minion      :1431][INFO    ][4015] Starting a new job with PID 4015
2018-10-02 08:11:44,607 [salt.minion      :1708][INFO    ][4015] Returning information for job: 20181002081144523767
2018-10-02 08:11:45,258 [salt.state       :1770][INFO    ][3999] Running state [aodh-api] at time 08:11:45.258803
2018-10-02 08:11:45,259 [salt.state       :1803][INFO    ][3999] Executing state pkg.installed for [aodh-api]
2018-10-02 08:11:45,260 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:11:45,957 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-10-02 08:11:46,189 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-02 08:11:48,258 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:11:48,313 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-10-02 08:11:54,720 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081154707010
2018-10-02 08:11:54,745 [salt.minion      :1431][INFO    ][4497] Starting a new job with PID 4497
2018-10-02 08:11:54,783 [salt.minion      :1708][INFO    ][4497] Returning information for job: 20181002081154707010
2018-10-02 08:12:04,900 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081204886381
2018-10-02 08:12:04,936 [salt.minion      :1431][INFO    ][4673] Starting a new job with PID 4673
2018-10-02 08:12:04,974 [salt.minion      :1708][INFO    ][4673] Returning information for job: 20181002081204886381
2018-10-02 08:12:15,092 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081215079697
2018-10-02 08:12:15,124 [salt.minion      :1431][INFO    ][8603] Starting a new job with PID 8603
2018-10-02 08:12:15,165 [salt.minion      :1708][INFO    ][8603] Returning information for job: 20181002081215079697
2018-10-02 08:12:24,851 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:12:24,935 [salt.state       :290 ][INFO    ][3999] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'c++-compiler' changed from 'absent' to '1'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-137.163'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev' changed from 'absent' to '1'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-10-02 08:12:24,983 [salt.state       :905 ][INFO    ][3999] Loading fresh modules for state activity
2018-10-02 08:12:25,141 [salt.state       :1941][INFO    ][3999] Completed state [aodh-api] at time 08:12:25.141106 duration_in_ms=39882.304
2018-10-02 08:12:25,145 [salt.state       :1770][INFO    ][3999] Running state [aodh-evaluator] at time 08:12:25.145697
2018-10-02 08:12:25,145 [salt.state       :1803][INFO    ][3999] Executing state pkg.installed for [aodh-evaluator]
2018-10-02 08:12:25,711 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081225275264
2018-10-02 08:12:25,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:12:25,728 [salt.minion      :1431][INFO    ][9628] Starting a new job with PID 9628
2018-10-02 08:12:25,746 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-10-02 08:12:25,750 [salt.minion      :1708][INFO    ][9628] Returning information for job: 20181002081225275264
2018-10-02 08:12:30,582 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:12:30,651 [salt.state       :290 ][INFO    ][3999] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-02 08:12:30,695 [salt.state       :905 ][INFO    ][3999] Loading fresh modules for state activity
2018-10-02 08:12:30,753 [salt.state       :1941][INFO    ][3999] Completed state [aodh-evaluator] at time 08:12:30.753623 duration_in_ms=5607.924
2018-10-02 08:12:30,762 [salt.state       :1770][INFO    ][3999] Running state [aodh-notifier] at time 08:12:30.762227
2018-10-02 08:12:30,763 [salt.state       :1803][INFO    ][3999] Executing state pkg.installed for [aodh-notifier]
2018-10-02 08:12:31,685 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:12:31,720 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-10-02 08:12:35,426 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081235414096
2018-10-02 08:12:35,442 [salt.minion      :1431][INFO    ][10123] Starting a new job with PID 10123
2018-10-02 08:12:35,482 [salt.minion      :1708][INFO    ][10123] Returning information for job: 20181002081235414096
2018-10-02 08:12:37,084 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:12:37,156 [salt.state       :290 ][INFO    ][3999] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-02 08:12:37,199 [salt.state       :905 ][INFO    ][3999] Loading fresh modules for state activity
2018-10-02 08:12:37,251 [salt.state       :1941][INFO    ][3999] Completed state [aodh-notifier] at time 08:12:37.251061 duration_in_ms=6488.834
2018-10-02 08:12:37,259 [salt.state       :1770][INFO    ][3999] Running state [aodh-listener] at time 08:12:37.259225
2018-10-02 08:12:37,259 [salt.state       :1803][INFO    ][3999] Executing state pkg.installed for [aodh-listener]
2018-10-02 08:12:38,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:12:38,064 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-10-02 08:12:42,654 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:12:42,694 [salt.state       :290 ][INFO    ][3999] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-02 08:12:42,718 [salt.state       :905 ][INFO    ][3999] Loading fresh modules for state activity
2018-10-02 08:12:42,750 [salt.state       :1941][INFO    ][3999] Completed state [aodh-listener] at time 08:12:42.750022 duration_in_ms=5490.795
2018-10-02 08:12:42,761 [salt.state       :1770][INFO    ][3999] Running state [python-aodhclient] at time 08:12:42.761621
2018-10-02 08:12:42,762 [salt.state       :1803][INFO    ][3999] Executing state pkg.installed for [python-aodhclient]
2018-10-02 08:12:43,569 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:12:43,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-10-02 08:12:45,611 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081245600385
2018-10-02 08:12:45,638 [salt.minion      :1431][INFO    ][10561] Starting a new job with PID 10561
2018-10-02 08:12:45,688 [salt.minion      :1708][INFO    ][10561] Returning information for job: 20181002081245600385
2018-10-02 08:12:46,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:12:46,790 [salt.state       :290 ][INFO    ][3999] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-10-02 08:12:46,817 [salt.state       :905 ][INFO    ][3999] Loading fresh modules for state activity
2018-10-02 08:12:46,844 [salt.state       :1941][INFO    ][3999] Completed state [python-aodhclient] at time 08:12:46.843977 duration_in_ms=4082.356
2018-10-02 08:12:46,846 [salt.state       :1770][INFO    ][3999] Running state [aodh_ssl_mysql] at time 08:12:46.846296
2018-10-02 08:12:46,846 [salt.state       :1803][INFO    ][3999] Executing state test.show_notification for [aodh_ssl_mysql]
2018-10-02 08:12:46,846 [salt.state       :290 ][INFO    ][3999] Running aodh._ssl.mysql
2018-10-02 08:12:46,847 [salt.state       :1941][INFO    ][3999] Completed state [aodh_ssl_mysql] at time 08:12:46.847054 duration_in_ms=0.759
2018-10-02 08:12:46,847 [salt.state       :1770][INFO    ][3999] Running state [aodh_ssl_rabbitmq] at time 08:12:46.847379
2018-10-02 08:12:46,847 [salt.state       :1803][INFO    ][3999] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-10-02 08:12:46,847 [salt.state       :290 ][INFO    ][3999] Running aodh._ssl.rabbitmq
2018-10-02 08:12:46,848 [salt.state       :1941][INFO    ][3999] Completed state [aodh_ssl_rabbitmq] at time 08:12:46.847985 duration_in_ms=0.607
2018-10-02 08:12:46,850 [salt.state       :1770][INFO    ][3999] Running state [/etc/aodh/aodh.conf] at time 08:12:46.850588
2018-10-02 08:12:46,850 [salt.state       :1803][INFO    ][3999] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-10-02 08:12:46,879 [salt.fileclient  :1215][INFO    ][3999] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-10-02 08:12:46,927 [salt.fileclient  :1215][INFO    ][3999] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-10-02 08:12:47,002 [salt.fileclient  :1215][INFO    ][3999] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-10-02 08:12:47,015 [salt.fileclient  :1215][INFO    ][3999] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-10-02 08:12:47,040 [salt.state       :290 ][INFO    ][3999] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 10.167.4.34
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@10.167.4.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,291 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +862,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +878,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +916,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -775,995 +1034,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-10-02 08:12:47,042 [salt.state       :1941][INFO    ][3999] Completed state [/etc/aodh/aodh.conf] at time 08:12:47.042432 duration_in_ms=191.843
2018-10-02 08:12:47,042 [salt.state       :1770][INFO    ][3999] Running state [/etc/default/aodh-evaluator] at time 08:12:47.042775
2018-10-02 08:12:47,043 [salt.state       :1803][INFO    ][3999] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-10-02 08:12:47,057 [salt.fileclient  :1215][INFO    ][3999] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-10-02 08:12:47,063 [salt.state       :290 ][INFO    ][3999] File changed:
New file
2018-10-02 08:12:47,063 [salt.state       :1941][INFO    ][3999] Completed state [/etc/default/aodh-evaluator] at time 08:12:47.063721 duration_in_ms=20.945
2018-10-02 08:12:47,064 [salt.state       :1770][INFO    ][3999] Running state [/etc/default/aodh-notifier] at time 08:12:47.064034
2018-10-02 08:12:47,064 [salt.state       :1803][INFO    ][3999] Executing state file.managed for [/etc/default/aodh-notifier]
2018-10-02 08:12:47,079 [salt.state       :290 ][INFO    ][3999] File changed:
New file
2018-10-02 08:12:47,079 [salt.state       :1941][INFO    ][3999] Completed state [/etc/default/aodh-notifier] at time 08:12:47.079362 duration_in_ms=15.328
2018-10-02 08:12:47,079 [salt.state       :1770][INFO    ][3999] Running state [/etc/default/aodh-listener] at time 08:12:47.079671
2018-10-02 08:12:47,079 [salt.state       :1803][INFO    ][3999] Executing state file.managed for [/etc/default/aodh-listener]
2018-10-02 08:12:47,113 [salt.state       :290 ][INFO    ][3999] File changed:
New file
2018-10-02 08:12:47,114 [salt.state       :1941][INFO    ][3999] Completed state [/etc/default/aodh-listener] at time 08:12:47.114009 duration_in_ms=34.339
2018-10-02 08:12:47,119 [salt.state       :1770][INFO    ][3999] Running state [aodh-dbsync] at time 08:12:47.119261
2018-10-02 08:12:47,119 [salt.state       :1803][INFO    ][3999] Executing state cmd.run for [aodh-dbsync]
2018-10-02 08:12:47,121 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command 'aodh-dbsync' in directory '/root'
2018-10-02 08:12:49,261 [salt.state       :290 ][INFO    ][3999] {'pid': 10630, 'retcode': 0, 'stderr': '', 'stdout': '2018-10-02 08:12:49.084 10632 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-10-02 08:12:49.085 10632 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-10-02 08:12:49,263 [salt.state       :1941][INFO    ][3999] Completed state [aodh-dbsync] at time 08:12:49.262899 duration_in_ms=2143.635
2018-10-02 08:12:49,264 [salt.state       :1770][INFO    ][3999] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 08:12:49.264719
2018-10-02 08:12:49,265 [salt.state       :1803][INFO    ][3999] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-10-02 08:12:49,293 [salt.fileclient  :1215][INFO    ][3999] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-10-02 08:12:49,352 [salt.state       :290 ][INFO    ][3999] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 10.167.4.34:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-10-02 08:12:49,355 [salt.state       :1941][INFO    ][3999] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 08:12:49.355374 duration_in_ms=90.654
2018-10-02 08:12:49,356 [salt.state       :1770][INFO    ][3999] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 08:12:49.356154
2018-10-02 08:12:49,356 [salt.state       :1803][INFO    ][3999] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-10-02 08:12:49,373 [salt.state       :290 ][INFO    ][3999] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-10-02 08:12:49,374 [salt.state       :1941][INFO    ][3999] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 08:12:49.373947 duration_in_ms=17.792
2018-10-02 08:12:49,910 [salt.state       :1770][INFO    ][3999] Running state [apache2] at time 08:12:49.910813
2018-10-02 08:12:49,911 [salt.state       :1803][INFO    ][3999] Executing state service.running for [apache2]
2018-10-02 08:12:49,912 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-02 08:12:49,946 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-02 08:12:49,973 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-02 08:12:50,004 [salt.state       :290 ][INFO    ][3999] The service apache2 is already running
2018-10-02 08:12:50,005 [salt.state       :1941][INFO    ][3999] Completed state [apache2] at time 08:12:50.005488 duration_in_ms=94.675
2018-10-02 08:12:50,006 [salt.state       :1770][INFO    ][3999] Running state [apache2] at time 08:12:50.006019
2018-10-02 08:12:50,006 [salt.state       :1803][INFO    ][3999] Executing state service.mod_watch for [apache2]
2018-10-02 08:12:50,008 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-02 08:12:50,034 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-02 08:12:52,509 [salt.state       :290 ][INFO    ][3999] {'apache2': True}
2018-10-02 08:12:52,510 [salt.state       :1941][INFO    ][3999] Completed state [apache2] at time 08:12:52.510154 duration_in_ms=2504.136
2018-10-02 08:12:52,512 [salt.state       :1770][INFO    ][3999] Running state [aodh-evaluator] at time 08:12:52.512810
2018-10-02 08:12:52,513 [salt.state       :1803][INFO    ][3999] Executing state service.running for [aodh-evaluator]
2018-10-02 08:12:52,514 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-10-02 08:12:52,552 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-02 08:12:52,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-10-02 08:12:52,614 [salt.state       :290 ][INFO    ][3999] The service aodh-evaluator is already running
2018-10-02 08:12:52,615 [salt.state       :1941][INFO    ][3999] Completed state [aodh-evaluator] at time 08:12:52.615561 duration_in_ms=102.75
2018-10-02 08:12:52,616 [salt.state       :1770][INFO    ][3999] Running state [aodh-evaluator] at time 08:12:52.616326
2018-10-02 08:12:52,617 [salt.state       :1803][INFO    ][3999] Executing state service.mod_watch for [aodh-evaluator]
2018-10-02 08:12:52,619 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-02 08:12:52,649 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-10-02 08:12:52,877 [salt.state       :290 ][INFO    ][3999] {'aodh-evaluator': True}
2018-10-02 08:12:52,884 [salt.state       :1941][INFO    ][3999] Completed state [aodh-evaluator] at time 08:12:52.877823 duration_in_ms=261.497
2018-10-02 08:12:52,885 [salt.state       :1770][INFO    ][3999] Running state [aodh-notifier] at time 08:12:52.885251
2018-10-02 08:12:52,885 [salt.state       :1803][INFO    ][3999] Executing state service.running for [aodh-notifier]
2018-10-02 08:12:52,887 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-10-02 08:12:52,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-02 08:12:52,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-10-02 08:12:52,962 [salt.state       :290 ][INFO    ][3999] The service aodh-notifier is already running
2018-10-02 08:12:52,963 [salt.state       :1941][INFO    ][3999] Completed state [aodh-notifier] at time 08:12:52.962934 duration_in_ms=77.682
2018-10-02 08:12:52,963 [salt.state       :1770][INFO    ][3999] Running state [aodh-notifier] at time 08:12:52.963217
2018-10-02 08:12:52,963 [salt.state       :1803][INFO    ][3999] Executing state service.mod_watch for [aodh-notifier]
2018-10-02 08:12:52,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-02 08:12:52,990 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-10-02 08:12:55,815 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081255804352
2018-10-02 08:12:55,837 [salt.minion      :1431][INFO    ][10904] Starting a new job with PID 10904
2018-10-02 08:12:55,876 [salt.minion      :1708][INFO    ][10904] Returning information for job: 20181002081255804352
2018-10-02 08:13:06,012 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081306000318
2018-10-02 08:13:06,042 [salt.minion      :1431][INFO    ][10919] Starting a new job with PID 10919
2018-10-02 08:13:06,075 [salt.minion      :1708][INFO    ][10919] Returning information for job: 20181002081306000318
2018-10-02 08:13:08,256 [salt.state       :290 ][INFO    ][3999] {'aodh-notifier': True}
2018-10-02 08:13:08,257 [salt.state       :1941][INFO    ][3999] Completed state [aodh-notifier] at time 08:13:08.257729 duration_in_ms=15294.51
2018-10-02 08:13:08,265 [salt.state       :1770][INFO    ][3999] Running state [aodh-listener] at time 08:13:08.265048
2018-10-02 08:13:08,266 [salt.state       :1803][INFO    ][3999] Executing state service.running for [aodh-listener]
2018-10-02 08:13:08,268 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-10-02 08:13:08,325 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-02 08:13:08,356 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-10-02 08:13:08,390 [salt.state       :290 ][INFO    ][3999] The service aodh-listener is already running
2018-10-02 08:13:08,392 [salt.state       :1941][INFO    ][3999] Completed state [aodh-listener] at time 08:13:08.391931 duration_in_ms=126.881
2018-10-02 08:13:08,393 [salt.state       :1770][INFO    ][3999] Running state [aodh-listener] at time 08:13:08.393127
2018-10-02 08:13:08,394 [salt.state       :1803][INFO    ][3999] Executing state service.mod_watch for [aodh-listener]
2018-10-02 08:13:08,395 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-02 08:13:08,420 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3999] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-10-02 08:13:16,206 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081316194015
2018-10-02 08:13:16,236 [salt.minion      :1431][INFO    ][10973] Starting a new job with PID 10973
2018-10-02 08:13:16,274 [salt.minion      :1708][INFO    ][10973] Returning information for job: 20181002081316194015
2018-10-02 08:13:23,514 [salt.state       :290 ][INFO    ][3999] {'aodh-listener': True}
2018-10-02 08:13:23,515 [salt.state       :1941][INFO    ][3999] Completed state [aodh-listener] at time 08:13:23.515356 duration_in_ms=15122.228
2018-10-02 08:13:23,528 [salt.minion      :1708][INFO    ][3999] Returning information for job: 20181002081139487113
2018-10-02 08:13:24,299 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command state.sls with jid 20181002081324289176
2018-10-02 08:13:24,337 [salt.minion      :1431][INFO    ][11012] Starting a new job with PID 11012
2018-10-02 08:13:29,415 [salt.state       :905 ][INFO    ][11012] Loading fresh modules for state activity
2018-10-02 08:13:29,744 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081329738644
2018-10-02 08:13:29,751 [salt.fileclient  :1215][INFO    ][11012] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-10-02 08:13:29,788 [salt.minion      :1431][INFO    ][11027] Starting a new job with PID 11027
2018-10-02 08:13:29,802 [salt.fileclient  :1215][INFO    ][11012] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-10-02 08:13:29,826 [salt.minion      :1708][INFO    ][11027] Returning information for job: 20181002081329738644
2018-10-02 08:13:31,922 [salt.state       :1770][INFO    ][11012] Running state [ceilometer-agent-central] at time 08:13:31.922148
2018-10-02 08:13:31,963 [salt.state       :1803][INFO    ][11012] Executing state pkg.installed for [ceilometer-agent-central]
2018-10-02 08:13:31,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:13:32,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-10-02 08:13:32,846 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-02 08:13:35,038 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:13:35,095 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-10-02 08:13:39,775 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081339763195
2018-10-02 08:13:39,804 [salt.minion      :1431][INFO    ][11454] Starting a new job with PID 11454
2018-10-02 08:13:39,863 [salt.minion      :1708][INFO    ][11454] Returning information for job: 20181002081339763195
2018-10-02 08:13:49,866 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081349853334
2018-10-02 08:13:49,897 [salt.minion      :1431][INFO    ][11679] Starting a new job with PID 11679
2018-10-02 08:13:49,940 [salt.minion      :1708][INFO    ][11679] Returning information for job: 20181002081349853334
2018-10-02 08:13:59,894 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081359879828
2018-10-02 08:13:59,923 [salt.minion      :1431][INFO    ][11927] Starting a new job with PID 11927
2018-10-02 08:13:59,963 [salt.minion      :1708][INFO    ][11927] Returning information for job: 20181002081359879828
2018-10-02 08:14:09,949 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081409936307
2018-10-02 08:14:09,977 [salt.minion      :1431][INFO    ][12137] Starting a new job with PID 12137
2018-10-02 08:14:10,032 [salt.minion      :1708][INFO    ][12137] Returning information for job: 20181002081409936307
2018-10-02 08:14:19,989 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081419974759
2018-10-02 08:14:20,018 [salt.minion      :1431][INFO    ][13297] Starting a new job with PID 13297
2018-10-02 08:14:20,056 [salt.minion      :1708][INFO    ][13297] Returning information for job: 20181002081419974759
2018-10-02 08:14:30,007 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081429994789
2018-10-02 08:14:30,037 [salt.minion      :1431][INFO    ][13486] Starting a new job with PID 13486
2018-10-02 08:14:30,079 [salt.minion      :1708][INFO    ][13486] Returning information for job: 20181002081429994789
2018-10-02 08:14:33,018 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:14:33,098 [salt.state       :290 ][INFO    ][11012] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0ubuntu2~cloud0'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.3~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.3~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'qemu-system-x86-64' changed from 'absent' to '1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python2.7-twisted-core' changed from 'absent' to '1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.3~cloud0'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libflac8' changed from 'absent' to '1.3.1-4'
'librados2' changed from 'absent' to '12.2.4-0ubuntu1~cloud1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.4-0ubuntu1~cloud1'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-10-02 08:14:33,159 [salt.state       :905 ][INFO    ][11012] Loading fresh modules for state activity
2018-10-02 08:14:33,352 [salt.state       :1941][INFO    ][11012] Completed state [ceilometer-agent-central] at time 08:14:33.352371 duration_in_ms=61430.225
2018-10-02 08:14:33,357 [salt.state       :1770][INFO    ][11012] Running state [python-ceilometerclient] at time 08:14:33.357196
2018-10-02 08:14:33,357 [salt.state       :1803][INFO    ][11012] Executing state pkg.installed for [python-ceilometerclient]
2018-10-02 08:14:33,905 [salt.state       :290 ][INFO    ][11012] All specified packages are already installed
2018-10-02 08:14:33,905 [salt.state       :1941][INFO    ][11012] Completed state [python-ceilometerclient] at time 08:14:33.905560 duration_in_ms=548.363
2018-10-02 08:14:33,905 [salt.state       :1770][INFO    ][11012] Running state [ceilometer-agent-notification] at time 08:14:33.905877
2018-10-02 08:14:33,906 [salt.state       :1803][INFO    ][11012] Executing state pkg.installed for [ceilometer-agent-notification]
2018-10-02 08:14:33,922 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-02 08:14:33,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-10-02 08:14:40,093 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command saltutil.find_job with jid 20181002081440081801
2018-10-02 08:14:40,133 [salt.minion      :1431][INFO    ][13831] Starting a new job with PID 13831
2018-10-02 08:14:40,217 [salt.minion      :1708][INFO    ][13831] Returning information for job: 20181002081440081801
2018-10-02 08:14:40,510 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-02 08:14:40,554 [salt.state       :290 ][INFO    ][11012] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-10-02 08:14:40,576 [salt.state       :905 ][INFO    ][11012] Loading fresh modules for state activity
2018-10-02 08:14:40,610 [salt.state       :1941][INFO    ][11012] Completed state [ceilometer-agent-notification] at time 08:14:40.610402 duration_in_ms=6704.525
2018-10-02 08:14:40,614 [salt.state       :1770][INFO    ][11012] Running state [/etc/ceilometer/ceilometer.conf] at time 08:14:40.614451
2018-10-02 08:14:40,614 [salt.state       :1803][INFO    ][11012] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-10-02 08:14:40,654 [salt.fileclient  :1215][INFO    ][11012] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-10-02 08:14:40,823 [salt.fileclient  :1215][INFO    ][11012] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-10-02 08:14:40,838 [salt.fileclient  :1215][INFO    ][11012] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-10-02 08:14:40,863 [salt.state       :290 ][INFO    ][11012] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-10-02 08:14:40,880 [salt.state       :1941][INFO    ][11012] Completed state [/etc/ceilometer/ceilometer.conf] at time 08:14:40.880457 duration_in_ms=266.0
2018-10-02 08:14:40,880 [salt.state       :1770][INFO    ][11012] Running state [/etc/default/ceilometer-agent-central] at time 08:14:40.880844
2018-10-02 08:14:40,881 [salt.state       :1803][INFO    ][11012] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-10-02 08:14:40,908 [salt.fileclient  :1215][INFO    ][11012] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-10-02 08:14:40,935 [salt.state       :290 ][INFO    ][11012] File changed:
New file
2018-10-02 08:14:40,936 [salt.state       :1941][INFO    ][11012] Completed state [/etc/default/ceilometer-agent-central] at time 08:14:40.936093 duration_in_ms=55.249
2018-10-02 08:14:40,936 [salt.state       :1770][INFO    ][11012] Running state [/etc/default/ceilometer-agent-notification] at time 08:14:40.936404
2018-10-02 08:14:40,948 [salt.state       :1803][INFO    ][11012] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-10-02 08:14:41,043 [salt.state       :290 ][INFO    ][11012] File changed:
New file
2018-10-02 08:14:41,043 [salt.state       :1941][INFO    ][11012] Completed state [/etc/default/ceilometer-agent-notification] at time 08:14:41.043521 duration_in_ms=107.115
2018-10-02 08:14:41,065 [salt.state       :1770][INFO    ][11012] Running state [python-gnocchiclient] at time 08:14:41.065119
2018-10-02 08:14:41,065 [salt.state       :1803][INFO    ][11012] Executing state pkg.latest for [python-gnocchiclient]
2018-10-02 08:14:41,110 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-10-02 08:14:41,557 [salt.state       :290 ][INFO    ][11012] Package python-gnocchiclient is already up-to-date
2018-10-02 08:14:41,558 [salt.state       :1941][INFO    ][11012] Completed state [python-gnocchiclient] at time 08:14:41.558248 duration_in_ms=493.129
2018-10-02 08:14:41,558 [salt.state       :1770][INFO    ][11012] Running state [/etc/ceilometer/pipeline.yaml] at time 08:14:41.558805
2018-10-02 08:14:41,559 [salt.state       :1803][INFO    ][11012] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-10-02 08:14:41,576 [salt.fileclient  :1215][INFO    ][11012] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-10-02 08:14:41,674 [salt.state       :290 ][INFO    ][11012] File changed:
New file
2018-10-02 08:14:41,675 [salt.state       :1941][INFO    ][11012] Completed state [/etc/ceilometer/pipeline.yaml] at time 08:14:41.675232 duration_in_ms=116.425
2018-10-02 08:14:41,676 [salt.state       :1770][INFO    ][11012] Running state [/etc/ceilometer/event_pipeline.yaml] at time 08:14:41.675998
2018-10-02 08:14:41,676 [salt.state       :1803][INFO    ][11012] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-10-02 08:14:41,704 [salt.fileclient  :1215][INFO    ][11012] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-10-02 08:14:41,819 [salt.state       :290 ][INFO    ][11012] File changed:
New file
2018-10-02 08:14:41,819 [salt.state       :1941][INFO    ][11012] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 08:14:41.819240 duration_in_ms=143.241
2018-10-02 08:14:41,819 [salt.state       :1770][INFO    ][11012] Running state [/etc/ceilometer/event_definitions.yaml] at time 08:14:41.819679
2018-10-02 08:14:41,820 [salt.state       :1803][INFO    ][11012] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-10-02 08:14:41,843 [salt.fileclient  :1215][INFO    ][11012] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-10-02 08:14:41,856 [salt.state       :290 ][INFO    ][11012] File changed:
New file
2018-10-02 08:14:41,856 [salt.state       :1941][INFO    ][11012] Completed state [/etc/ceilometer/event_definitions.yaml] at time 08:14:41.856327 duration_in_ms=36.648
2018-10-02 08:14:41,856 [salt.state       :1770][INFO    ][11012] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 08:14:41.856696
2018-10-02 08:14:41,856 [salt.state       :1803][INFO    ][11012] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-10-02 08:14:41,876 [salt.fileclient  :1215][INFO    ][11012] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-10-02 08:14:41,892 [salt.state       :290 ][INFO    ][11012] File changed:
New file
2018-10-02 08:14:41,893 [salt.state       :1941][INFO    ][11012] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 08:14:41.893025 duration_in_ms=36.328
2018-10-02 08:14:42,386 [salt.state       :1770][INFO    ][11012] Running state [ceilometer-agent-central] at time 08:14:42.386786
2018-10-02 08:14:42,387 [salt.state       :1803][INFO    ][11012] Executing state service.running for [ceilometer-agent-central]
2018-10-02 08:14:42,388 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-10-02 08:14:42,404 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-02 08:14:42,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-02 08:14:42,432 [salt.state       :290 ][INFO    ][11012] The service ceilometer-agent-central is already running
2018-10-02 08:14:42,433 [salt.state       :1941][INFO    ][11012] Completed state [ceilometer-agent-central] at time 08:14:42.433124 duration_in_ms=46.339
2018-10-02 08:14:42,433 [salt.state       :1770][INFO    ][11012] Running state [ceilometer-agent-central] at time 08:14:42.433538
2018-10-02 08:14:42,434 [salt.state       :1803][INFO    ][11012] Executing state service.mod_watch for [ceilometer-agent-central]
2018-10-02 08:14:42,435 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-02 08:14:42,448 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-02 08:14:42,725 [salt.state       :290 ][INFO    ][11012] {'ceilometer-agent-central': True}
2018-10-02 08:14:42,725 [salt.state       :1941][INFO    ][11012] Completed state [ceilometer-agent-central] at time 08:14:42.725688 duration_in_ms=292.15
2018-10-02 08:14:42,729 [salt.state       :1770][INFO    ][11012] Running state [ceilometer-agent-notification] at time 08:14:42.729846
2018-10-02 08:14:42,733 [salt.state       :1803][INFO    ][11012] Executing state service.running for [ceilometer-agent-notification]
2018-10-02 08:14:42,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-10-02 08:14:42,765 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-02 08:14:42,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-02 08:14:42,818 [salt.state       :290 ][INFO    ][11012] The service ceilometer-agent-notification is already running
2018-10-02 08:14:42,819 [salt.state       :1941][INFO    ][11012] Completed state [ceilometer-agent-notification] at time 08:14:42.819371 duration_in_ms=89.526
2018-10-02 08:14:42,819 [salt.state       :1770][INFO    ][11012] Running state [ceilometer-agent-notification] at time 08:14:42.819664
2018-10-02 08:14:42,820 [salt.state       :1803][INFO    ][11012] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-10-02 08:14:42,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-02 08:14:42,851 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11012] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-02 08:14:43,052 [salt.state       :290 ][INFO    ][11012] {'ceilometer-agent-notification': True}
2018-10-02 08:14:43,053 [salt.state       :1941][INFO    ][11012] Completed state [ceilometer-agent-notification] at time 08:14:43.053196 duration_in_ms=233.532
2018-10-02 08:14:43,058 [salt.minion      :1708][INFO    ][11012] Returning information for job: 20181002081324289176
2018-10-02 08:22:12,960 [salt.minion      :1307][INFO    ][3219] User sudo_ubuntu Executing command cp.push_dir with jid 20181002082212944377
2018-10-02 08:22:12,993 [salt.minion      :1431][INFO    ][14045] Starting a new job with PID 14045
