2018-09-30 08:26:39,325 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:39,803 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:39,807 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:39,810 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:39,813 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:40,642 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:40,647 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:40,651 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:40,815 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:40,821 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:40,826 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:40,831 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,153 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,211 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,216 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,222 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,227 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,231 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,236 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,241 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,246 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,250 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,255 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,259 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,263 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,268 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,272 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,276 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,280 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,284 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,288 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,292 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,295 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,299 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,303 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,307 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,310 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,314 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,317 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,321 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,324 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,328 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,331 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,334 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,337 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,341 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,344 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,347 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,350 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,353 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,356 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,360 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,363 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,366 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,369 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,372 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:26:41,375 [salt.utils.decorators:82  ][ERROR   ][1897] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-30 08:27:07,927 [salt.utils.decorators:613 ][WARNING ][1897] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-30 08:27:10,914 [salt.loaded.int.states.file:2150][WARNING ][1897] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-09-30 08:27:13,528 [salt.loaded.int.states.file:2150][WARNING ][1897] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-09-30 08:27:14,996 [salt.loaded.int.states.file:2150][WARNING ][1897] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-09-30 08:27:18,232 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3113] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-09-30 08:27:18,255 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3113] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-09-30 08:27:18,277 [salt.utils.parsers:1051][WARNING ][1551] Minion received a SIGTERM. Exiting.
2018-09-30 08:27:19,213 [salt.cli.daemons :293 ][INFO    ][3178] Setting up the Salt Minion "mdb01.mcp-odl-ha.local"
2018-09-30 08:27:19,298 [salt.cli.daemons :82  ][INFO    ][3178] Starting up the Salt Minion
2018-09-30 08:27:19,298 [salt.utils.event :1017][INFO    ][3178] Starting pull socket on /var/run/salt/minion/minion_event_e46c2d81b7_pull.ipc
2018-09-30 08:27:19,950 [salt.minion      :976 ][INFO    ][3178] Creating minion process manager
2018-09-30 08:27:20,945 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3178] Executing command ['date', '+%z'] in directory '/root'
2018-09-30 08:27:20,962 [salt.utils.schedule:568 ][INFO    ][3178] Updating job settings for scheduled job: __mine_interval
2018-09-30 08:27:20,972 [salt.minion      :1107][INFO    ][3178] Added mine.update to scheduler
2018-09-30 08:27:20,987 [salt.minion      :1965][INFO    ][3178] Minion is starting as user 'root'
2018-09-30 08:27:21,004 [salt.minion      :2324][INFO    ][3178] Minion is ready to receive requests!
2018-09-30 08:28:53,942 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command state.apply with jid 20180930082853930907
2018-09-30 08:28:53,993 [salt.minion      :1431][INFO    ][3260] Starting a new job with PID 3260
2018-09-30 08:28:59,721 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930082859711511
2018-09-30 08:28:59,746 [salt.minion      :1431][INFO    ][3267] Starting a new job with PID 3267
2018-09-30 08:28:59,775 [salt.minion      :1708][INFO    ][3267] Returning information for job: 20180930082859711511
2018-09-30 08:29:00,127 [salt.state       :905 ][INFO    ][3260] Loading fresh modules for state activity
2018-09-30 08:29:00,184 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-09-30 08:29:00,217 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-09-30 08:29:00,330 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-09-30 08:29:00,402 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-09-30 08:29:01,069 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-09-30 08:29:01,287 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-09-30 08:29:01,405 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-09-30 08:29:01,475 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-09-30 08:29:01,566 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-09-30 08:29:01,586 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-09-30 08:29:01,667 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-09-30 08:29:01,800 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-09-30 08:29:01,890 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-09-30 08:29:01,988 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-09-30 08:29:02,062 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-09-30 08:29:02,164 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-09-30 08:29:02,236 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-09-30 08:29:02,318 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-09-30 08:29:02,422 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-09-30 08:29:02,996 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-09-30 08:29:03,146 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-09-30 08:29:03,338 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-09-30 08:29:03,477 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-09-30 08:29:03,605 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-09-30 08:29:03,721 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-09-30 08:29:03,757 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-09-30 08:29:03,792 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-09-30 08:29:03,821 [salt.state       :1770][INFO    ][3260] Running state [/etc/environment] at time 08:29:03.821945
2018-09-30 08:29:03,822 [salt.state       :1803][INFO    ][3260] Executing state file.blockreplace for [/etc/environment]
2018-09-30 08:29:03,830 [salt.state       :290 ][INFO    ][3260] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-09-30 08:29:03,831 [salt.state       :1941][INFO    ][3260] Completed state [/etc/environment] at time 08:29:03.831387 duration_in_ms=9.443
2018-09-30 08:29:03,831 [salt.state       :1770][INFO    ][3260] Running state [/etc/profile.d] at time 08:29:03.831769
2018-09-30 08:29:03,832 [salt.state       :1803][INFO    ][3260] Executing state file.directory for [/etc/profile.d]
2018-09-30 08:29:03,838 [salt.state       :290 ][INFO    ][3260] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-09-30 08:29:03,839 [salt.state       :1941][INFO    ][3260] Completed state [/etc/profile.d] at time 08:29:03.839156 duration_in_ms=7.388
2018-09-30 08:29:04,323 [salt.state       :1770][INFO    ][3260] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 08:29:04.322985
2018-09-30 08:29:04,323 [salt.state       :1803][INFO    ][3260] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-09-30 08:29:04,732 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-09-30 08:29:04,772 [salt.state       :290 ][INFO    ][3260] File changed:
New file
2018-09-30 08:29:04,773 [salt.state       :1941][INFO    ][3260] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 08:29:04.773671 duration_in_ms=450.685
2018-09-30 08:29:04,774 [salt.state       :1770][INFO    ][3260] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 08:29:04.774298
2018-09-30 08:29:04,774 [salt.state       :1803][INFO    ][3260] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-09-30 08:29:04,800 [salt.state       :290 ][INFO    ][3260] File changed:
New file
2018-09-30 08:29:04,801 [salt.state       :1941][INFO    ][3260] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 08:29:04.801475 duration_in_ms=27.177
2018-09-30 08:29:04,802 [salt.state       :1770][INFO    ][3260] Running state [linux_repo_prereq_pkgs] at time 08:29:04.802861
2018-09-30 08:29:04,803 [salt.state       :1803][INFO    ][3260] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-09-30 08:29:04,804 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 08:29:05,195 [salt.state       :290 ][INFO    ][3260] All specified packages are already installed
2018-09-30 08:29:05,195 [salt.state       :1941][INFO    ][3260] Completed state [linux_repo_prereq_pkgs] at time 08:29:05.195625 duration_in_ms=392.764
2018-09-30 08:29:05,196 [salt.state       :1770][INFO    ][3260] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 08:29:05.196097
2018-09-30 08:29:05,196 [salt.state       :1803][INFO    ][3260] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-09-30 08:29:05,197 [salt.state       :290 ][INFO    ][3260] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-09-30 08:29:05,197 [salt.state       :1941][INFO    ][3260] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 08:29:05.197468 duration_in_ms=1.372
2018-09-30 08:29:05,197 [salt.state       :1770][INFO    ][3260] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 08:29:05.197835
2018-09-30 08:29:05,198 [salt.state       :1803][INFO    ][3260] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-09-30 08:29:05,198 [salt.state       :290 ][INFO    ][3260] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-09-30 08:29:05,198 [salt.state       :1941][INFO    ][3260] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 08:29:05.198919 duration_in_ms=1.084
2018-09-30 08:29:05,199 [salt.state       :1770][INFO    ][3260] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 08:29:05.199294
2018-09-30 08:29:05,199 [salt.state       :1803][INFO    ][3260] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-09-30 08:29:05,220 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-09-30 08:29:05,340 [salt.state       :290 ][INFO    ][3260] File changed:
New file
2018-09-30 08:29:05,341 [salt.state       :1941][INFO    ][3260] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 08:29:05.340976 duration_in_ms=141.682
2018-09-30 08:29:05,344 [salt.state       :1770][INFO    ][3260] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 08:29:05.344713
2018-09-30 08:29:05,345 [salt.state       :1803][INFO    ][3260] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-09-30 08:29:06,228 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-09-30 08:29:06,514 [salt.state       :290 ][INFO    ][3260] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-09-30 08:29:06,515 [salt.state       :1941][INFO    ][3260] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 08:29:06.514999 duration_in_ms=1170.286
2018-09-30 08:29:06,515 [salt.state       :1770][INFO    ][3260] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 08:29:06.515309
2018-09-30 08:29:06,515 [salt.state       :1803][INFO    ][3260] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-09-30 08:29:06,516 [salt.state       :290 ][INFO    ][3260] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-09-30 08:29:06,516 [salt.state       :1941][INFO    ][3260] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 08:29:06.516169 duration_in_ms=0.859
2018-09-30 08:29:06,516 [salt.state       :1770][INFO    ][3260] Running state [/etc/apt/preferences.d/uca] at time 08:29:06.516358
2018-09-30 08:29:06,516 [salt.state       :1803][INFO    ][3260] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-09-30 08:29:06,932 [salt.state       :290 ][INFO    ][3260] File changed:
New file
2018-09-30 08:29:06,932 [salt.state       :1941][INFO    ][3260] Completed state [/etc/apt/preferences.d/uca] at time 08:29:06.932658 duration_in_ms=416.299
2018-09-30 08:29:06,934 [salt.state       :1770][INFO    ][3260] Running state [echo 'LS0tLS1CRUdJTiBQR1AgUFVCTElDIEtFWSBCTE9DSy0tLS0tClZlcnNpb246IEdudVBHIHYxCgptUUlOQkZBcVNsZ0JFQURQS3dYVXdxYmdvRFlnUjIwekZ5cHhTWmxTYnJ0dE9LVlBFTWIwSFNVeDlXajhWdk5DCnIrbVQ0RTl3QXlxN05USXM1YWQyY1VoWG95ZW5yamNmR3FLNms5UjZ5UkhEYnZBeENTV1RuSmp3N216c2FqRE4Kb2NYQzZUSEtWVzhCU2pyaDBhT0JMcGh0NmQ1UUNPMnZ5V3h3NjVGS002NUdPc2JYMDNabmdVUE11T3VpT0VIUQpabzk3VlNIMnBTQitMK0IzZDlCMG53M1FuVThxWk1uZStuVldZTFlSWGhDSXhTdjEvaDM5U1h6SFJnSm9SVUZICnZMMmFpaVZybjg4TmpxZkRXMTVIRmhWSmNHT0Z1QUNablJBMC9FcVRxMHFObzNHemlRTzRteHVaaTNiVFZMNXMKR0FCaVlXOXVJbG9rUHFjUzdGYTBGUlZJVTlSK2JCZEhab21wY1luS0FlR2FnK3VSdnVUcUMzTU1SY0xVUzlPaQovUDlJOGZQQVJYVVB3ellOM2ZhZ0NHQjhmZllWcU11bm5GczBMNnRkMDhCZ3ZXd2VyK0J1dTRmUEdzUTVPek1jCmxnWjBUSm1YeU9sSVc0OWxjMVVYbk9ScDRzbTdIUzZva0E3UDZVUmJxeUdiYXBsU3NOVVZUZ1ZiaSt2YzgvalkKZGZFeHQvM0h4VnFnclBscTlodHFZZ3doWXZHSWJCQXhtZUZRRDhBay9TaFNpV2IxRmRRK2Y3THR5KzRtWkxmTgo4eDR6UFovLzdmRDVkL1BFVFBoOVAwbXNGK2xMRmxQNTY0KzFqNzV3eCtza0ZPNHYxZ0dsQmNEYWVpcGtGemVvCnpuZEFncGVneWRLU05URjRRSzlpVFlvYlRJd3NZZkd1UzhyVjIxekUyc2FMTTBDRTNUOTBhSFlCL3dBUkFRQUIKdEQxRFlXNXZibWxqWVd3Z1EyeHZkV1FnUVhKamFHbDJaU0JUYVdkdWFXNW5JRXRsZVNBOFpuUndiV0Z6ZEdWeQpRR05oYm05dWFXTmhiQzVqYjIwK2lRSTNCQk1CQ0FBaEJRSlFLa3BZQWhzREJRc0pDQWNEQlJVS0NRZ0xCUllDCkF3RUFBaDRCQWhlQUFBb0pFRjdiRzJMc1NTYnFLeGtRQUlLdGdJbXJrMDJZQ0RsZGc2dEx0M2I2OVpLMGtJVkkKM1hzby96Q0JaYnJZRm1nR1FFRkhBYTU4bUlncHY1R2NnSEh4V2pwWDNuNHR1MlJNOUVuZUt2RmpGQnN0VFRnbwp5dUNnRnI3aWJsdnMvYU1XNGpGSkFpSWJtampYV1ZjMENWQi9KbExxekJKL01sSGRSOU9XbW9qTjlaem9JQStpCit0V2x5cGdVb3Q4aUl4a1I2SkVOeGl0NXY5ZE44aTZhbm1uV3liUTZQWEZNdU5pNkd6UTBKZ1pJVnMzN24wa3MKMndoME44aEJqQUt1VWdxdTRNUE13dk50ejhGeEV6eUt3TE5TTW5qTEFoem1sL29qZS9OajFHQkI4cm9qNWRtdwo3UFN1bDVwQXFRNUtUYVh6bDZnSk41dk1FWnpPNHRFb0d0UnBBMC9HVFNYSWxjeC9TR2tVSzUrbHFkUUlNZHlTCm44YkltVTZWNnJEU29PYUk5WVdIWnRwdjVXZVVzTlRkZjY4alpzRkNSRCsyK05FbUlxQlZtMTF5aG1Vb2FzQzYKZFl3NWw5UC9QQmR3bUZtNk5CVVNFd3hiK1JPZnBMMUlDYVprOUp5Kys2YWt4aFkvLytjWUVQTGluMDJyNDNaMwpvNVBpcXVqcnMxUjJIczdrWDg0Z0w1U2xCelRNNEVkK29iN0tWdFFIVGVmcGJPMzViUWxsa1BOcWZCc0M4QUlDCjh4dlRQMlM4RmljWU9QQVRFdWlSV3M3S24zMVRXQzJpd3N3UktFS1ZSbU4wZmRwdS9VUGRNaWt5b051OXN6QloKUnh2a1JBZXpoM1doZUo2TVc2Rm1nOWQrdVRGSm9oWnQ1cUhkcHhZYTRiZXVONG1lOExGMFRZemdmRWJGVDZiOQpENkl5VEZvVDBMZXF1UUlOQkZBcVNsZ0JFQURtTDNURXE1ZWpCWXJBKzY0em84Rll2Q0Y0Z3ppUGE1ckNJSkdaCi9nWlhRN3BtNXplay9sT2U5QzgwbWh4TldlTG1yV01rTU9XS0NlYURNRnBNQk9RaFpabVJkYWtPbkgveHhPNXgKK2ZSZE9PaHkrNUdUUkppd2t1R09WNnJCOWVZSjNVTjljYVAyaGZpcENNcEpqbGczai9Hd2t0amh1cWNCSFhoQQpITWh6eEVPSURFNWhtcERxWjA1MWY4TEdYbGQ5YVNMOFJjdG9ZRk04c2dhZlBWbUlDVENxMFdoMDNkcjVjMkpBCmdFWHkzdXNoWW0vOGkyV0ZteWxkbzd2YnRUZngzRHBtSmMvRU1wR0tWK0d4Y0kzL0VScVNrZGUwa1dsbWZQWmIKby81K2hScVNyeXFmUXRSS25GRVFnQXFBaFBJd1h3T2tqQ3BQbkROZnJrdnpWRXRsMi9CV1AvMS9TT3F6WGprOQpUSWIxUTdNSEFOZUZNclRDcHJ6UExYNklkQzR6THArTHBWOTFXMnp5Z1FKelBnV3FIL1ovV0ZINGdYY0JCcW1JCjhiRnBNUE9OWWM5LzY3QVdVQUJvMlZPQ29qZ3RRbWp4dUZuK3VHTnc5UHZ4SkFGM3lqbDc4MVBWTFV3M242NmQKd0hSbVlqNGhxeE5ETHl3aGhuTC9DQzdLVUR0Qm5VVS9DS24vMFhnbTlvejN0aHV4RzZpM0YzcFFncHA3TWVNbgp0S2hMRldSWG85QmllOHovYzBOVjRLNUhjcGJHYThRUHFvRHNlQjVXYU80eUdJQk90K25pek00RExySSt2MDd5ClhlM0ptN3pCU3BZU3JHYXJaR0s2OHFhbVMzWFB6TXNoUGRvWFh6MzNia1FyVFBwaXZHWVFWUlp1emQvUjZiKzYKSXVyVitRQVJBUUFCaVFJZkJCZ0JDQUFKQlFKUUtrcFlBaHNNQUFvSkVGN2JHMkxzU1NicTU5RVAvMVUzODE1Lwp5SFYzY2YvSmVIZ2g2V1MvT3kya1JIcC9rSnQzZXYvbC9xSXhmTUlweU0zdS9ENnNpT1JQVFVYSFBtM0FhWnJiCncwRURXQnlBM2pIUUV6bExJYnNER1pncm5sK214RnVId0MxeUV1VzN4cnpnanRHWkNKdXJlWi9CRDZ4ZlJ1UmMKbXZuZXRBWnYvejk4Vk4vb2ozcnZZaFVpNzFOQXBxU3ZNRXhwTkJHcmRPNmdRbEk1YXpoT3U4eEdOeTRPU2tlOApKNnBBc01VWEljRXdqVkVJdmV3SnVxQlcvM3JqM0hoMTR0bVdqUTdzaE5uWUJ1U0p3YkxlVVcyZThiVVJuZlhFClR4ckNtWHpEbVFsZEQ1R1FXQ2NENVdEb3NrL0hWSEJtSGxxcnF5MFZPMm5FM2M3M2RRbE5jSTRqVldlQzRiNFEKU3BZVnNGei82SXF5NVpRa0NPcFE1N01DZjBCNlA1bkY5MmM1ZjNUWVBNeEhmMHgzRHJqRGJVVlp5dHhEaVpaYQpYc2JaenNlamJiYzFiU05wNGhiK0lXaG1Xb0ZucS9oTkhYektQSEJUYXBPYm5RanUrOXpVbFFuZ1YwQmxQVDYyCmhPSE93M1B2N3N1T3V6emZ1T083cXB6MHVBeThjRktlN2tCdExTRlZqQndhRzVKWDg5bWd0dFlXK2x3OVJtc2IKcDlJdzRLS0ZISUJMT3drN3MrdTBMVWhQM2Q4bmVCSTZOZmtPWUtaWkNtM0N1dmtpT2VRUDkvMm9rRmp0aisyOQpqRUwrOUtRd3JHTkZFVk5lODVVbjVNSmZZSWpneXFYM25KY3d5cFl4aWRudG5oTWhyMlZEM0hMMlIvNENpc3dCCk9hNGc5MzA5cC8rYWYvSFUxc21Cck9mSWVSb3hiOGpRb0h1Mwo9eGc0UwotLS0tLUVORCBQR1AgUFVCTElDIEtFWSBCTE9DSy0tLS0tCg==' | base64 -d | apt-key add -] at time 08:29:06.934790
2018-09-30 08:29:06,935 [salt.state       :1803][INFO    ][3260] Executing state cmd.run for [echo 'LS0tLS1CRUdJTiBQR1AgUFVCTElDIEtFWSBCTE9DSy0tLS0tClZlcnNpb246IEdudVBHIHYxCgptUUlOQkZBcVNsZ0JFQURQS3dYVXdxYmdvRFlnUjIwekZ5cHhTWmxTYnJ0dE9LVlBFTWIwSFNVeDlXajhWdk5DCnIrbVQ0RTl3QXlxN05USXM1YWQyY1VoWG95ZW5yamNmR3FLNms5UjZ5UkhEYnZBeENTV1RuSmp3N216c2FqRE4Kb2NYQzZUSEtWVzhCU2pyaDBhT0JMcGh0NmQ1UUNPMnZ5V3h3NjVGS002NUdPc2JYMDNabmdVUE11T3VpT0VIUQpabzk3VlNIMnBTQitMK0IzZDlCMG53M1FuVThxWk1uZStuVldZTFlSWGhDSXhTdjEvaDM5U1h6SFJnSm9SVUZICnZMMmFpaVZybjg4TmpxZkRXMTVIRmhWSmNHT0Z1QUNablJBMC9FcVRxMHFObzNHemlRTzRteHVaaTNiVFZMNXMKR0FCaVlXOXVJbG9rUHFjUzdGYTBGUlZJVTlSK2JCZEhab21wY1luS0FlR2FnK3VSdnVUcUMzTU1SY0xVUzlPaQovUDlJOGZQQVJYVVB3ellOM2ZhZ0NHQjhmZllWcU11bm5GczBMNnRkMDhCZ3ZXd2VyK0J1dTRmUEdzUTVPek1jCmxnWjBUSm1YeU9sSVc0OWxjMVVYbk9ScDRzbTdIUzZva0E3UDZVUmJxeUdiYXBsU3NOVVZUZ1ZiaSt2YzgvalkKZGZFeHQvM0h4VnFnclBscTlodHFZZ3doWXZHSWJCQXhtZUZRRDhBay9TaFNpV2IxRmRRK2Y3THR5KzRtWkxmTgo4eDR6UFovLzdmRDVkL1BFVFBoOVAwbXNGK2xMRmxQNTY0KzFqNzV3eCtza0ZPNHYxZ0dsQmNEYWVpcGtGemVvCnpuZEFncGVneWRLU05URjRRSzlpVFlvYlRJd3NZZkd1UzhyVjIxekUyc2FMTTBDRTNUOTBhSFlCL3dBUkFRQUIKdEQxRFlXNXZibWxqWVd3Z1EyeHZkV1FnUVhKamFHbDJaU0JUYVdkdWFXNW5JRXRsZVNBOFpuUndiV0Z6ZEdWeQpRR05oYm05dWFXTmhiQzVqYjIwK2lRSTNCQk1CQ0FBaEJRSlFLa3BZQWhzREJRc0pDQWNEQlJVS0NRZ0xCUllDCkF3RUFBaDRCQWhlQUFBb0pFRjdiRzJMc1NTYnFLeGtRQUlLdGdJbXJrMDJZQ0RsZGc2dEx0M2I2OVpLMGtJVkkKM1hzby96Q0JaYnJZRm1nR1FFRkhBYTU4bUlncHY1R2NnSEh4V2pwWDNuNHR1MlJNOUVuZUt2RmpGQnN0VFRnbwp5dUNnRnI3aWJsdnMvYU1XNGpGSkFpSWJtampYV1ZjMENWQi9KbExxekJKL01sSGRSOU9XbW9qTjlaem9JQStpCit0V2x5cGdVb3Q4aUl4a1I2SkVOeGl0NXY5ZE44aTZhbm1uV3liUTZQWEZNdU5pNkd6UTBKZ1pJVnMzN24wa3MKMndoME44aEJqQUt1VWdxdTRNUE13dk50ejhGeEV6eUt3TE5TTW5qTEFoem1sL29qZS9OajFHQkI4cm9qNWRtdwo3UFN1bDVwQXFRNUtUYVh6bDZnSk41dk1FWnpPNHRFb0d0UnBBMC9HVFNYSWxjeC9TR2tVSzUrbHFkUUlNZHlTCm44YkltVTZWNnJEU29PYUk5WVdIWnRwdjVXZVVzTlRkZjY4alpzRkNSRCsyK05FbUlxQlZtMTF5aG1Vb2FzQzYKZFl3NWw5UC9QQmR3bUZtNk5CVVNFd3hiK1JPZnBMMUlDYVprOUp5Kys2YWt4aFkvLytjWUVQTGluMDJyNDNaMwpvNVBpcXVqcnMxUjJIczdrWDg0Z0w1U2xCelRNNEVkK29iN0tWdFFIVGVmcGJPMzViUWxsa1BOcWZCc0M4QUlDCjh4dlRQMlM4RmljWU9QQVRFdWlSV3M3S24zMVRXQzJpd3N3UktFS1ZSbU4wZmRwdS9VUGRNaWt5b051OXN6QloKUnh2a1JBZXpoM1doZUo2TVc2Rm1nOWQrdVRGSm9oWnQ1cUhkcHhZYTRiZXVONG1lOExGMFRZemdmRWJGVDZiOQpENkl5VEZvVDBMZXF1UUlOQkZBcVNsZ0JFQURtTDNURXE1ZWpCWXJBKzY0em84Rll2Q0Y0Z3ppUGE1ckNJSkdaCi9nWlhRN3BtNXplay9sT2U5QzgwbWh4TldlTG1yV01rTU9XS0NlYURNRnBNQk9RaFpabVJkYWtPbkgveHhPNXgKK2ZSZE9PaHkrNUdUUkppd2t1R09WNnJCOWVZSjNVTjljYVAyaGZpcENNcEpqbGczai9Hd2t0amh1cWNCSFhoQQpITWh6eEVPSURFNWhtcERxWjA1MWY4TEdYbGQ5YVNMOFJjdG9ZRk04c2dhZlBWbUlDVENxMFdoMDNkcjVjMkpBCmdFWHkzdXNoWW0vOGkyV0ZteWxkbzd2YnRUZngzRHBtSmMvRU1wR0tWK0d4Y0kzL0VScVNrZGUwa1dsbWZQWmIKby81K2hScVNyeXFmUXRSS25GRVFnQXFBaFBJd1h3T2tqQ3BQbkROZnJrdnpWRXRsMi9CV1AvMS9TT3F6WGprOQpUSWIxUTdNSEFOZUZNclRDcHJ6UExYNklkQzR6THArTHBWOTFXMnp5Z1FKelBnV3FIL1ovV0ZINGdYY0JCcW1JCjhiRnBNUE9OWWM5LzY3QVdVQUJvMlZPQ29qZ3RRbWp4dUZuK3VHTnc5UHZ4SkFGM3lqbDc4MVBWTFV3M242NmQKd0hSbVlqNGhxeE5ETHl3aGhuTC9DQzdLVUR0Qm5VVS9DS24vMFhnbTlvejN0aHV4RzZpM0YzcFFncHA3TWVNbgp0S2hMRldSWG85QmllOHovYzBOVjRLNUhjcGJHYThRUHFvRHNlQjVXYU80eUdJQk90K25pek00RExySSt2MDd5ClhlM0ptN3pCU3BZU3JHYXJaR0s2OHFhbVMzWFB6TXNoUGRvWFh6MzNia1FyVFBwaXZHWVFWUlp1emQvUjZiKzYKSXVyVitRQVJBUUFCaVFJZkJCZ0JDQUFKQlFKUUtrcFlBaHNNQUFvSkVGN2JHMkxzU1NicTU5RVAvMVUzODE1Lwp5SFYzY2YvSmVIZ2g2V1MvT3kya1JIcC9rSnQzZXYvbC9xSXhmTUlweU0zdS9ENnNpT1JQVFVYSFBtM0FhWnJiCncwRURXQnlBM2pIUUV6bExJYnNER1pncm5sK214RnVId0MxeUV1VzN4cnpnanRHWkNKdXJlWi9CRDZ4ZlJ1UmMKbXZuZXRBWnYvejk4Vk4vb2ozcnZZaFVpNzFOQXBxU3ZNRXhwTkJHcmRPNmdRbEk1YXpoT3U4eEdOeTRPU2tlOApKNnBBc01VWEljRXdqVkVJdmV3SnVxQlcvM3JqM0hoMTR0bVdqUTdzaE5uWUJ1U0p3YkxlVVcyZThiVVJuZlhFClR4ckNtWHpEbVFsZEQ1R1FXQ2NENVdEb3NrL0hWSEJtSGxxcnF5MFZPMm5FM2M3M2RRbE5jSTRqVldlQzRiNFEKU3BZVnNGei82SXF5NVpRa0NPcFE1N01DZjBCNlA1bkY5MmM1ZjNUWVBNeEhmMHgzRHJqRGJVVlp5dHhEaVpaYQpYc2JaenNlamJiYzFiU05wNGhiK0lXaG1Xb0ZucS9oTkhYektQSEJUYXBPYm5RanUrOXpVbFFuZ1YwQmxQVDYyCmhPSE93M1B2N3N1T3V6emZ1T083cXB6MHVBeThjRktlN2tCdExTRlZqQndhRzVKWDg5bWd0dFlXK2x3OVJtc2IKcDlJdzRLS0ZISUJMT3drN3MrdTBMVWhQM2Q4bmVCSTZOZmtPWUtaWkNtM0N1dmtpT2VRUDkvMm9rRmp0aisyOQpqRUwrOUtRd3JHTkZFVk5lODVVbjVNSmZZSWpneXFYM25KY3d5cFl4aWRudG5oTWhyMlZEM0hMMlIvNENpc3dCCk9hNGc5MzA5cC8rYWYvSFUxc21Cck9mSWVSb3hiOGpRb0h1Mwo9eGc0UwotLS0tLUVORCBQR1AgUFVCTElDIEtFWSBCTE9DSy0tLS0tCg==' | base64 -d | apt-key add -]
2018-09-30 08:29:06,936 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-09-30 08:29:07,091 [salt.state       :290 ][INFO    ][3260] {'pid': 3469, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-09-30 08:29:07,092 [salt.state       :1941][INFO    ][3260] Completed state [echo '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' | base64 -d | apt-key add -] at time 08:29:07.092276 duration_in_ms=157.485
2018-09-30 08:29:07,094 [salt.state       :1770][INFO    ][3260] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 08:29:07.094705
2018-09-30 08:29:07,095 [salt.state       :1803][INFO    ][3260] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-09-30 08:29:07,158 [salt.state       :290 ][INFO    ][3260] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-09-30 08:29:07,158 [salt.state       :1941][INFO    ][3260] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 08:29:07.158487 duration_in_ms=63.782
2018-09-30 08:29:07,159 [salt.state       :1770][INFO    ][3260] Running state [pkg.refresh_db] at time 08:29:07.159395
2018-09-30 08:29:07,159 [salt.state       :1803][INFO    ][3260] Executing state module.run for [pkg.refresh_db]
2018-09-30 08:29:07,159 [salt.utils.decorators:613 ][WARNING ][3260] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-30 08:29:07,160 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-30 08:29:09,820 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930082909794489
2018-09-30 08:29:09,969 [salt.minion      :1431][INFO    ][3944] Starting a new job with PID 3944
2018-09-30 08:29:09,998 [salt.minion      :1708][INFO    ][3944] Returning information for job: 20180930082909794489
2018-09-30 08:29:11,448 [salt.state       :290 ][INFO    ][3260] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-09-30 08:29:11,449 [salt.state       :1941][INFO    ][3260] Completed state [pkg.refresh_db] at time 08:29:11.449653 duration_in_ms=4290.257
2018-09-30 08:29:11,450 [salt.state       :1770][INFO    ][3260] Running state [linux_extra_packages_latest] at time 08:29:11.450246
2018-09-30 08:29:11,450 [salt.state       :1803][INFO    ][3260] Executing state pkg.latest for [linux_extra_packages_latest]
2018-09-30 08:29:11,463 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-09-30 08:29:11,617 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 08:29:11,637 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-09-30 08:29:16,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 08:29:16,753 [salt.state       :290 ][INFO    ][3260] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-09-30 08:29:16,769 [salt.state       :905 ][INFO    ][3260] Loading fresh modules for state activity
2018-09-30 08:29:16,795 [salt.state       :1941][INFO    ][3260] Completed state [linux_extra_packages_latest] at time 08:29:16.795311 duration_in_ms=5345.064
2018-09-30 08:29:16,798 [salt.state       :1770][INFO    ][3260] Running state [UTC] at time 08:29:16.798702
2018-09-30 08:29:16,798 [salt.state       :1803][INFO    ][3260] Executing state timezone.system for [UTC]
2018-09-30 08:29:16,804 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['timedatectl'] in directory '/root'
2018-09-30 08:29:16,872 [salt.state       :290 ][INFO    ][3260] Timezone UTC already set, UTC already set to UTC
2018-09-30 08:29:16,872 [salt.state       :1941][INFO    ][3260] Completed state [UTC] at time 08:29:16.872843 duration_in_ms=74.14
2018-09-30 08:29:16,875 [salt.state       :1770][INFO    ][3260] Running state [/etc/default/grub.d] at time 08:29:16.875732
2018-09-30 08:29:16,876 [salt.state       :1803][INFO    ][3260] Executing state file.directory for [/etc/default/grub.d]
2018-09-30 08:29:16,881 [salt.state       :290 ][INFO    ][3260] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-09-30 08:29:16,881 [salt.state       :1941][INFO    ][3260] Completed state [/etc/default/grub.d] at time 08:29:16.881934 duration_in_ms=6.202
2018-09-30 08:29:16,884 [salt.state       :1770][INFO    ][3260] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 08:29:16.884318
2018-09-30 08:29:16,884 [salt.state       :1803][INFO    ][3260] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2018-09-30 08:29:16,907 [salt.state       :290 ][INFO    ][3260] File changed:
New file
2018-09-30 08:29:16,907 [salt.state       :1941][INFO    ][3260] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 08:29:16.907287 duration_in_ms=22.969
2018-09-30 08:29:16,907 [salt.state       :1770][INFO    ][3260] Running state [update-grub] at time 08:29:16.907881
2018-09-30 08:29:16,908 [salt.state       :1803][INFO    ][3260] Executing state cmd.wait for [update-grub]
2018-09-30 08:29:16,908 [salt.state       :290 ][INFO    ][3260] No changes made for update-grub
2018-09-30 08:29:16,908 [salt.state       :1941][INFO    ][3260] Completed state [update-grub] at time 08:29:16.908483 duration_in_ms=0.602
2018-09-30 08:29:16,908 [salt.state       :1770][INFO    ][3260] Running state [update-grub] at time 08:29:16.908640
2018-09-30 08:29:16,908 [salt.state       :1803][INFO    ][3260] Executing state cmd.mod_watch for [update-grub]
2018-09-30 08:29:16,909 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'update-grub' in directory '/root'
2018-09-30 08:29:17,713 [salt.state       :290 ][INFO    ][3260] {'pid': 4115, 'retcode': 0, 'stderr': 'Generating grub configuration file ...\nFound linux image: /boot/vmlinuz-4.15.0-34-generic\nFound initrd image: /boot/initrd.img-4.15.0-34-generic\nFound linux image: /boot/vmlinuz-4.4.0-135-generic\nFound initrd image: /boot/initrd.img-4.4.0-135-generic\ndone', 'stdout': ''}
2018-09-30 08:29:17,714 [salt.state       :1941][INFO    ][3260] Completed state [update-grub] at time 08:29:17.714445 duration_in_ms=805.804
2018-09-30 08:29:17,720 [salt.state       :1770][INFO    ][3260] Running state [nf_conntrack] at time 08:29:17.720465
2018-09-30 08:29:17,721 [salt.state       :1803][INFO    ][3260] Executing state kmod.present for [nf_conntrack]
2018-09-30 08:29:17,722 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'lsmod' in directory '/root'
2018-09-30 08:29:18,670 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'lsmod' in directory '/root'
2018-09-30 08:29:18,695 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-09-30 08:29:18,729 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'lsmod' in directory '/root'
2018-09-30 08:29:18,837 [salt.state       :290 ][INFO    ][3260] {'nf_conntrack': 'loaded'}
2018-09-30 08:29:18,837 [salt.state       :1941][INFO    ][3260] Completed state [nf_conntrack] at time 08:29:18.837570 duration_in_ms=1117.106
2018-09-30 08:29:18,840 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.tcp_keepalive_probes] at time 08:29:18.840887
2018-09-30 08:29:18,841 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-09-30 08:29:18,842 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-09-30 08:29:18,871 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.tcp_keepalive_probes': 8}
2018-09-30 08:29:18,872 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.tcp_keepalive_probes] at time 08:29:18.872254 duration_in_ms=31.367
2018-09-30 08:29:18,873 [salt.state       :1770][INFO    ][3260] Running state [fs.file-max] at time 08:29:18.872931
2018-09-30 08:29:18,873 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [fs.file-max]
2018-09-30 08:29:18,875 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-09-30 08:29:18,895 [salt.state       :290 ][INFO    ][3260] {'fs.file-max': 124165}
2018-09-30 08:29:18,896 [salt.state       :1941][INFO    ][3260] Completed state [fs.file-max] at time 08:29:18.896088 duration_in_ms=23.157
2018-09-30 08:29:18,896 [salt.state       :1770][INFO    ][3260] Running state [net.core.somaxconn] at time 08:29:18.896726
2018-09-30 08:29:18,897 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.core.somaxconn]
2018-09-30 08:29:18,898 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-09-30 08:29:18,916 [salt.state       :290 ][INFO    ][3260] {'net.core.somaxconn': 4096}
2018-09-30 08:29:18,917 [salt.state       :1941][INFO    ][3260] Completed state [net.core.somaxconn] at time 08:29:18.917472 duration_in_ms=20.745
2018-09-30 08:29:18,918 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.tcp_max_syn_backlog] at time 08:29:18.918088
2018-09-30 08:29:18,918 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-09-30 08:29:18,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-09-30 08:29:18,937 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-09-30 08:29:18,937 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.tcp_max_syn_backlog] at time 08:29:18.937784 duration_in_ms=19.696
2018-09-30 08:29:18,938 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.tcp_tw_reuse] at time 08:29:18.938403
2018-09-30 08:29:18,939 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-09-30 08:29:18,940 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-09-30 08:29:18,955 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.tcp_tw_reuse': 1}
2018-09-30 08:29:18,956 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.tcp_tw_reuse] at time 08:29:18.956088 duration_in_ms=17.685
2018-09-30 08:29:18,956 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.tcp_congestion_control] at time 08:29:18.956673
2018-09-30 08:29:18,957 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-09-30 08:29:18,958 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-09-30 08:29:19,017 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-09-30 08:29:19,018 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.tcp_congestion_control] at time 08:29:19.018251 duration_in_ms=61.577
2018-09-30 08:29:19,019 [salt.state       :1770][INFO    ][3260] Running state [net.nf_conntrack_max] at time 08:29:19.019039
2018-09-30 08:29:19,019 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.nf_conntrack_max]
2018-09-30 08:29:19,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-09-30 08:29:19,047 [salt.state       :290 ][INFO    ][3260] {'net.nf_conntrack_max': 1048576}
2018-09-30 08:29:19,048 [salt.state       :1941][INFO    ][3260] Completed state [net.nf_conntrack_max] at time 08:29:19.048319 duration_in_ms=29.279
2018-09-30 08:29:19,049 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.tcp_retries2] at time 08:29:19.049579
2018-09-30 08:29:19,050 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-09-30 08:29:19,052 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-09-30 08:29:19,076 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.tcp_retries2': 5}
2018-09-30 08:29:19,077 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.tcp_retries2] at time 08:29:19.077499 duration_in_ms=27.92
2018-09-30 08:29:19,078 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.tcp_fin_timeout] at time 08:29:19.078458
2018-09-30 08:29:19,079 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-09-30 08:29:19,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-09-30 08:29:19,104 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.tcp_fin_timeout': 30}
2018-09-30 08:29:19,105 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.tcp_fin_timeout] at time 08:29:19.104956 duration_in_ms=26.496
2018-09-30 08:29:19,105 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.tcp_slow_start_after_idle] at time 08:29:19.105793
2018-09-30 08:29:19,106 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-09-30 08:29:19,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-09-30 08:29:19,129 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-09-30 08:29:19,130 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 08:29:19.130556 duration_in_ms=24.762
2018-09-30 08:29:19,131 [salt.state       :1770][INFO    ][3260] Running state [vm.swappiness] at time 08:29:19.131475
2018-09-30 08:29:19,132 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [vm.swappiness]
2018-09-30 08:29:19,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-09-30 08:29:19,154 [salt.state       :290 ][INFO    ][3260] {'vm.swappiness': 10}
2018-09-30 08:29:19,155 [salt.state       :1941][INFO    ][3260] Completed state [vm.swappiness] at time 08:29:19.155387 duration_in_ms=23.911
2018-09-30 08:29:19,156 [salt.state       :1770][INFO    ][3260] Running state [net.core.netdev_max_backlog] at time 08:29:19.156169
2018-09-30 08:29:19,156 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-09-30 08:29:19,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-09-30 08:29:19,175 [salt.state       :290 ][INFO    ][3260] {'net.core.netdev_max_backlog': 261144}
2018-09-30 08:29:19,176 [salt.state       :1941][INFO    ][3260] Completed state [net.core.netdev_max_backlog] at time 08:29:19.176360 duration_in_ms=20.191
2018-09-30 08:29:19,177 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.neigh.default.gc_thresh1] at time 08:29:19.177146
2018-09-30 08:29:19,177 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-09-30 08:29:19,179 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-09-30 08:29:19,194 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-09-30 08:29:19,195 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 08:29:19.195128 duration_in_ms=17.982
2018-09-30 08:29:19,195 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.neigh.default.gc_thresh2] at time 08:29:19.195756
2018-09-30 08:29:19,196 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-09-30 08:29:19,197 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-09-30 08:29:19,211 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-09-30 08:29:19,212 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 08:29:19.212524 duration_in_ms=16.768
2018-09-30 08:29:19,213 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.neigh.default.gc_thresh3] at time 08:29:19.213118
2018-09-30 08:29:19,213 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-09-30 08:29:19,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-09-30 08:29:19,228 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-09-30 08:29:19,229 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 08:29:19.229539 duration_in_ms=16.422
2018-09-30 08:29:19,230 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.tcp_keepalive_intvl] at time 08:29:19.230149
2018-09-30 08:29:19,230 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-09-30 08:29:19,232 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-09-30 08:29:19,245 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-09-30 08:29:19,246 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.tcp_keepalive_intvl] at time 08:29:19.246362 duration_in_ms=16.213
2018-09-30 08:29:19,247 [salt.state       :1770][INFO    ][3260] Running state [net.ipv4.tcp_keepalive_time] at time 08:29:19.246973
2018-09-30 08:29:19,247 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-09-30 08:29:19,254 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-09-30 08:29:19,268 [salt.state       :290 ][INFO    ][3260] {'net.ipv4.tcp_keepalive_time': 30}
2018-09-30 08:29:19,268 [salt.state       :1941][INFO    ][3260] Completed state [net.ipv4.tcp_keepalive_time] at time 08:29:19.268687 duration_in_ms=21.715
2018-09-30 08:29:19,269 [salt.state       :1770][INFO    ][3260] Running state [kernel.panic] at time 08:29:19.269229
2018-09-30 08:29:19,269 [salt.state       :1803][INFO    ][3260] Executing state sysctl.present for [kernel.panic]
2018-09-30 08:29:19,271 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-09-30 08:29:19,285 [salt.state       :290 ][INFO    ][3260] {'kernel.panic': 60}
2018-09-30 08:29:19,286 [salt.state       :1941][INFO    ][3260] Completed state [kernel.panic] at time 08:29:19.286040 duration_in_ms=16.803
2018-09-30 08:29:19,294 [salt.state       :1770][INFO    ][3260] Running state [linux_sysfs_package] at time 08:29:19.293999
2018-09-30 08:29:19,294 [salt.state       :1803][INFO    ][3260] Executing state pkg.installed for [linux_sysfs_package]
2018-09-30 08:29:19,849 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-09-30 08:29:20,008 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930082919994392
2018-09-30 08:29:20,022 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-30 08:29:20,035 [salt.minion      :1431][INFO    ][4587] Starting a new job with PID 4587
2018-09-30 08:29:20,060 [salt.minion      :1708][INFO    ][4587] Returning information for job: 20180930082919994392
2018-09-30 08:29:21,997 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 08:29:22,029 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-09-30 08:29:29,623 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 08:29:29,667 [salt.state       :290 ][INFO    ][3260] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-09-30 08:29:29,686 [salt.state       :905 ][INFO    ][3260] Loading fresh modules for state activity
2018-09-30 08:29:29,717 [salt.state       :1941][INFO    ][3260] Completed state [linux_sysfs_package] at time 08:29:29.717432 duration_in_ms=10423.432
2018-09-30 08:29:29,722 [salt.state       :1770][INFO    ][3260] Running state [/etc/sysfs.d] at time 08:29:29.721964
2018-09-30 08:29:29,722 [salt.state       :1803][INFO    ][3260] Executing state file.directory for [/etc/sysfs.d]
2018-09-30 08:29:29,726 [salt.state       :290 ][INFO    ][3260] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-09-30 08:29:29,726 [salt.state       :1941][INFO    ][3260] Completed state [/etc/sysfs.d] at time 08:29:29.726823 duration_in_ms=4.859
2018-09-30 08:29:30,067 [salt.state       :1770][INFO    ][3260] Running state [ondemand] at time 08:29:30.067303
2018-09-30 08:29:30,068 [salt.state       :1803][INFO    ][3260] Executing state service.dead for [ondemand]
2018-09-30 08:29:30,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-09-30 08:29:30,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-09-30 08:29:30,092 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-09-30 08:29:30,114 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-09-30 08:29:30,167 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-09-30 08:29:30,188 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-09-30 08:29:30,212 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-09-30 08:29:30,232 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-09-30 08:29:30,361 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-09-30 08:29:30,379 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'runlevel' in directory '/root'
2018-09-30 08:29:30,390 [salt.state       :290 ][INFO    ][3260] {'ondemand': True}
2018-09-30 08:29:30,391 [salt.state       :1941][INFO    ][3260] Completed state [ondemand] at time 08:29:30.391087 duration_in_ms=323.784
2018-09-30 08:29:30,392 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930082930173754
2018-09-30 08:29:30,392 [salt.state       :1770][INFO    ][3260] Running state [en_US.UTF-8] at time 08:29:30.392143
2018-09-30 08:29:30,392 [salt.state       :1803][INFO    ][3260] Executing state locale.present for [en_US.UTF-8]
2018-09-30 08:29:30,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'locale -a' in directory '/root'
2018-09-30 08:29:30,403 [salt.state       :290 ][INFO    ][3260] Locale en_US.UTF-8 is already present
2018-09-30 08:29:30,404 [salt.state       :1941][INFO    ][3260] Completed state [en_US.UTF-8] at time 08:29:30.404426 duration_in_ms=12.282
2018-09-30 08:29:30,406 [salt.state       :1770][INFO    ][3260] Running state [en_US.UTF-8] at time 08:29:30.405999
2018-09-30 08:29:30,406 [salt.state       :1803][INFO    ][3260] Executing state locale.system for [en_US.UTF-8]
2018-09-30 08:29:30,407 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'localectl' in directory '/root'
2018-09-30 08:29:30,409 [salt.minion      :1431][INFO    ][5485] Starting a new job with PID 5485
2018-09-30 08:29:30,423 [salt.minion      :1708][INFO    ][5485] Returning information for job: 20180930082930173754
2018-09-30 08:29:30,463 [salt.state       :290 ][INFO    ][3260] System locale en_US.UTF-8 already set
2018-09-30 08:29:30,463 [salt.state       :1941][INFO    ][3260] Completed state [en_US.UTF-8] at time 08:29:30.463732 duration_in_ms=57.733
2018-09-30 08:29:30,464 [salt.state       :1770][INFO    ][3260] Running state [root] at time 08:29:30.464654
2018-09-30 08:29:30,464 [salt.state       :1803][INFO    ][3260] Executing state group.present for [root]
2018-09-30 08:29:30,465 [salt.state       :290 ][INFO    ][3260] Group root is present and up to date
2018-09-30 08:29:30,465 [salt.state       :1941][INFO    ][3260] Completed state [root] at time 08:29:30.465506 duration_in_ms=0.852
2018-09-30 08:29:30,467 [salt.state       :1770][INFO    ][3260] Running state [root] at time 08:29:30.467626
2018-09-30 08:29:30,467 [salt.state       :1803][INFO    ][3260] Executing state user.present for [root]
2018-09-30 08:29:30,471 [salt.state       :290 ][INFO    ][3260] User root is present and up to date
2018-09-30 08:29:30,471 [salt.state       :1941][INFO    ][3260] Completed state [root] at time 08:29:30.471465 duration_in_ms=3.839
2018-09-30 08:29:30,472 [salt.state       :1770][INFO    ][3260] Running state [/root] at time 08:29:30.472162
2018-09-30 08:29:30,472 [salt.state       :1803][INFO    ][3260] Executing state file.directory for [/root]
2018-09-30 08:29:30,472 [salt.state       :290 ][INFO    ][3260] Directory /root is in the correct state
Directory /root updated
2018-09-30 08:29:30,473 [salt.state       :1941][INFO    ][3260] Completed state [/root] at time 08:29:30.473115 duration_in_ms=0.953
2018-09-30 08:29:30,473 [salt.state       :1770][INFO    ][3260] Running state [/etc/sudoers.d/90-salt-user-root] at time 08:29:30.473279
2018-09-30 08:29:30,473 [salt.state       :1803][INFO    ][3260] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-09-30 08:29:30,473 [salt.state       :290 ][INFO    ][3260] File /etc/sudoers.d/90-salt-user-root is not present
2018-09-30 08:29:30,473 [salt.state       :1941][INFO    ][3260] Completed state [/etc/sudoers.d/90-salt-user-root] at time 08:29:30.473810 duration_in_ms=0.531
2018-09-30 08:29:30,473 [salt.state       :1770][INFO    ][3260] Running state [ubuntu] at time 08:29:30.473964
2018-09-30 08:29:30,474 [salt.state       :1803][INFO    ][3260] Executing state group.present for [ubuntu]
2018-09-30 08:29:30,474 [salt.state       :290 ][INFO    ][3260] Group ubuntu is present and up to date
2018-09-30 08:29:30,474 [salt.state       :1941][INFO    ][3260] Completed state [ubuntu] at time 08:29:30.474478 duration_in_ms=0.514
2018-09-30 08:29:30,475 [salt.state       :1770][INFO    ][3260] Running state [ubuntu] at time 08:29:30.475094
2018-09-30 08:29:30,475 [salt.state       :1803][INFO    ][3260] Executing state user.present for [ubuntu]
2018-09-30 08:29:30,477 [salt.state       :290 ][INFO    ][3260] {'passwd': 'XXX-REDACTED-XXX'}
2018-09-30 08:29:30,477 [salt.state       :1941][INFO    ][3260] Completed state [ubuntu] at time 08:29:30.477842 duration_in_ms=2.749
2018-09-30 08:29:30,478 [salt.state       :1770][INFO    ][3260] Running state [/home/ubuntu] at time 08:29:30.478527
2018-09-30 08:29:30,478 [salt.state       :1803][INFO    ][3260] Executing state file.directory for [/home/ubuntu]
2018-09-30 08:29:30,479 [salt.state       :290 ][INFO    ][3260] {'mode': '0700'}
2018-09-30 08:29:30,479 [salt.state       :1941][INFO    ][3260] Completed state [/home/ubuntu] at time 08:29:30.479578 duration_in_ms=1.051
2018-09-30 08:29:30,480 [salt.state       :1770][INFO    ][3260] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 08:29:30.480143
2018-09-30 08:29:30,480 [salt.state       :1803][INFO    ][3260] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-09-30 08:29:31,019 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-09-30 08:29:31,027 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.Uc8UqZ' in directory '/root'
2018-09-30 08:29:31,061 [salt.state       :290 ][INFO    ][3260] File changed:
New file
2018-09-30 08:29:31,061 [salt.state       :1941][INFO    ][3260] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 08:29:31.061753 duration_in_ms=581.609
2018-09-30 08:29:31,062 [salt.state       :1770][INFO    ][3260] Running state [/etc/security/limits.d/90-salt-default.conf] at time 08:29:31.062509
2018-09-30 08:29:31,063 [salt.state       :1803][INFO    ][3260] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-09-30 08:29:31,089 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-09-30 08:29:31,154 [salt.state       :290 ][INFO    ][3260] File changed:
New file
2018-09-30 08:29:31,154 [salt.state       :1941][INFO    ][3260] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 08:29:31.154385 duration_in_ms=91.877
2018-09-30 08:29:31,154 [salt.state       :1770][INFO    ][3260] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 08:29:31.154599
2018-09-30 08:29:31,154 [salt.state       :1803][INFO    ][3260] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-09-30 08:29:31,168 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-09-30 08:29:31,224 [salt.state       :290 ][INFO    ][3260] File changed:
New file
2018-09-30 08:29:31,224 [salt.state       :1941][INFO    ][3260] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 08:29:31.224468 duration_in_ms=69.869
2018-09-30 08:29:31,226 [salt.state       :1770][INFO    ][3260] Running state [service.systemctl_reload] at time 08:29:31.226310
2018-09-30 08:29:31,226 [salt.state       :1803][INFO    ][3260] Executing state module.wait for [service.systemctl_reload]
2018-09-30 08:29:31,226 [salt.state       :290 ][INFO    ][3260] No changes made for service.systemctl_reload
2018-09-30 08:29:31,226 [salt.state       :1941][INFO    ][3260] Completed state [service.systemctl_reload] at time 08:29:31.226942 duration_in_ms=0.632
2018-09-30 08:29:31,227 [salt.state       :1770][INFO    ][3260] Running state [service.systemctl_reload] at time 08:29:31.227095
2018-09-30 08:29:31,227 [salt.state       :1803][INFO    ][3260] Executing state module.mod_watch for [service.systemctl_reload]
2018-09-30 08:29:31,227 [salt.utils.decorators:613 ][WARNING ][3260] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-30 08:29:31,228 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-09-30 08:29:31,362 [salt.state       :290 ][INFO    ][3260] {'ret': True}
2018-09-30 08:29:31,363 [salt.state       :1941][INFO    ][3260] Completed state [service.systemctl_reload] at time 08:29:31.363417 duration_in_ms=136.321
2018-09-30 08:29:31,363 [salt.state       :1770][INFO    ][3260] Running state [/etc/issue] at time 08:29:31.363827
2018-09-30 08:29:31,364 [salt.state       :1803][INFO    ][3260] Executing state file.managed for [/etc/issue]
2018-09-30 08:29:31,373 [salt.state       :290 ][INFO    ][3260] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-09-30 08:29:31,374 [salt.state       :1941][INFO    ][3260] Completed state [/etc/issue] at time 08:29:31.374342 duration_in_ms=10.513
2018-09-30 08:29:31,374 [salt.state       :1770][INFO    ][3260] Running state [/etc/hostname] at time 08:29:31.374860
2018-09-30 08:29:31,375 [salt.state       :1803][INFO    ][3260] Executing state file.managed for [/etc/hostname]
2018-09-30 08:29:31,397 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-09-30 08:29:31,411 [salt.state       :290 ][INFO    ][3260] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb01

2018-09-30 08:29:31,412 [salt.state       :1941][INFO    ][3260] Completed state [/etc/hostname] at time 08:29:31.412111 duration_in_ms=37.251
2018-09-30 08:29:31,414 [salt.state       :1770][INFO    ][3260] Running state [hostname mdb01] at time 08:29:31.414531
2018-09-30 08:29:31,414 [salt.state       :1803][INFO    ][3260] Executing state cmd.run for [hostname mdb01]
2018-09-30 08:29:31,415 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'test "$(hostname)" = "mdb01"' in directory '/root'
2018-09-30 08:29:31,437 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command 'hostname mdb01' in directory '/root'
2018-09-30 08:29:31,454 [salt.state       :290 ][INFO    ][3260] {'pid': 5536, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-09-30 08:29:31,455 [salt.state       :1941][INFO    ][3260] Completed state [hostname mdb01] at time 08:29:31.455440 duration_in_ms=40.908
2018-09-30 08:29:31,456 [salt.state       :1770][INFO    ][3260] Running state [mdb02] at time 08:29:31.456884
2018-09-30 08:29:31,457 [salt.state       :1803][INFO    ][3260] Executing state host.present for [mdb02]
2018-09-30 08:29:31,458 [salt.state       :290 ][INFO    ][3260] {'host': 'mdb02'}
2018-09-30 08:29:31,458 [salt.state       :1941][INFO    ][3260] Completed state [mdb02] at time 08:29:31.458602 duration_in_ms=1.718
2018-09-30 08:29:31,459 [salt.state       :1770][INFO    ][3260] Running state [mdb02.mcp-odl-ha.local] at time 08:29:31.458960
2018-09-30 08:29:31,459 [salt.state       :1803][INFO    ][3260] Executing state host.present for [mdb02.mcp-odl-ha.local]
2018-09-30 08:29:31,462 [salt.state       :290 ][INFO    ][3260] {'host': 'mdb02.mcp-odl-ha.local'}
2018-09-30 08:29:31,463 [salt.state       :1941][INFO    ][3260] Completed state [mdb02.mcp-odl-ha.local] at time 08:29:31.463043 duration_in_ms=4.082
2018-09-30 08:29:31,463 [salt.state       :1770][INFO    ][3260] Running state [mdb03] at time 08:29:31.463540
2018-09-30 08:29:31,463 [salt.state       :1803][INFO    ][3260] Executing state host.present for [mdb03]
2018-09-30 08:29:31,469 [salt.state       :290 ][INFO    ][3260] {'host': 'mdb03'}
2018-09-30 08:29:31,469 [salt.state       :1941][INFO    ][3260] Completed state [mdb03] at time 08:29:31.469400 duration_in_ms=5.86
2018-09-30 08:29:31,470 [salt.state       :1770][INFO    ][3260] Running state [mdb03.mcp-odl-ha.local] at time 08:29:31.469958
2018-09-30 08:29:31,470 [salt.state       :1803][INFO    ][3260] Executing state host.present for [mdb03.mcp-odl-ha.local]
2018-09-30 08:29:31,474 [salt.state       :290 ][INFO    ][3260] {'host': 'mdb03.mcp-odl-ha.local'}
2018-09-30 08:29:31,475 [salt.state       :1941][INFO    ][3260] Completed state [mdb03.mcp-odl-ha.local] at time 08:29:31.474976 duration_in_ms=5.018
2018-09-30 08:29:31,475 [salt.state       :1770][INFO    ][3260] Running state [mdb01] at time 08:29:31.475313
2018-09-30 08:29:31,475 [salt.state       :1803][INFO    ][3260] Executing state host.present for [mdb01]
2018-09-30 08:29:31,487 [salt.state       :290 ][INFO    ][3260] {'host': 'mdb01'}
2018-09-30 08:29:31,487 [salt.state       :1941][INFO    ][3260] Completed state [mdb01] at time 08:29:31.487374 duration_in_ms=12.059
2018-09-30 08:29:31,487 [salt.state       :1770][INFO    ][3260] Running state [mdb01.mcp-odl-ha.local] at time 08:29:31.487907
2018-09-30 08:29:31,488 [salt.state       :1803][INFO    ][3260] Executing state host.present for [mdb01.mcp-odl-ha.local]
2018-09-30 08:29:31,492 [salt.state       :290 ][INFO    ][3260] {'host': 'mdb01.mcp-odl-ha.local'}
2018-09-30 08:29:31,493 [salt.state       :1941][INFO    ][3260] Completed state [mdb01.mcp-odl-ha.local] at time 08:29:31.493337 duration_in_ms=5.43
2018-09-30 08:29:31,494 [salt.state       :1770][INFO    ][3260] Running state [mdb] at time 08:29:31.493990
2018-09-30 08:29:31,494 [salt.state       :1803][INFO    ][3260] Executing state host.present for [mdb]
2018-09-30 08:29:31,500 [salt.state       :290 ][INFO    ][3260] {'host': 'mdb'}
2018-09-30 08:29:31,501 [salt.state       :1941][INFO    ][3260] Completed state [mdb] at time 08:29:31.501020 duration_in_ms=7.032
2018-09-30 08:29:31,501 [salt.state       :1770][INFO    ][3260] Running state [mdb.mcp-odl-ha.local] at time 08:29:31.501407
2018-09-30 08:29:31,501 [salt.state       :1803][INFO    ][3260] Executing state host.present for [mdb.mcp-odl-ha.local]
2018-09-30 08:29:31,504 [salt.state       :290 ][INFO    ][3260] {'host': 'mdb.mcp-odl-ha.local'}
2018-09-30 08:29:31,504 [salt.state       :1941][INFO    ][3260] Completed state [mdb.mcp-odl-ha.local] at time 08:29:31.504888 duration_in_ms=3.481
2018-09-30 08:29:31,505 [salt.state       :1770][INFO    ][3260] Running state [cfg01] at time 08:29:31.505220
2018-09-30 08:29:31,505 [salt.state       :1803][INFO    ][3260] Executing state host.present for [cfg01]
2018-09-30 08:29:31,510 [salt.state       :290 ][INFO    ][3260] {'host': 'cfg01'}
2018-09-30 08:29:31,511 [salt.state       :1941][INFO    ][3260] Completed state [cfg01] at time 08:29:31.510971 duration_in_ms=5.75
2018-09-30 08:29:31,511 [salt.state       :1770][INFO    ][3260] Running state [cfg01.mcp-odl-ha.local] at time 08:29:31.511388
2018-09-30 08:29:31,511 [salt.state       :1803][INFO    ][3260] Executing state host.present for [cfg01.mcp-odl-ha.local]
2018-09-30 08:29:31,516 [salt.state       :290 ][INFO    ][3260] {'host': 'cfg01.mcp-odl-ha.local'}
2018-09-30 08:29:31,516 [salt.state       :1941][INFO    ][3260] Completed state [cfg01.mcp-odl-ha.local] at time 08:29:31.516938 duration_in_ms=5.551
2018-09-30 08:29:31,517 [salt.state       :1770][INFO    ][3260] Running state [prx01] at time 08:29:31.517338
2018-09-30 08:29:31,517 [salt.state       :1803][INFO    ][3260] Executing state host.present for [prx01]
2018-09-30 08:29:31,522 [salt.state       :290 ][INFO    ][3260] {'host': 'prx01'}
2018-09-30 08:29:31,522 [salt.state       :1941][INFO    ][3260] Completed state [prx01] at time 08:29:31.522658 duration_in_ms=5.319
2018-09-30 08:29:31,523 [salt.state       :1770][INFO    ][3260] Running state [prx01.mcp-odl-ha.local] at time 08:29:31.523093
2018-09-30 08:29:31,523 [salt.state       :1803][INFO    ][3260] Executing state host.present for [prx01.mcp-odl-ha.local]
2018-09-30 08:29:31,528 [salt.state       :290 ][INFO    ][3260] {'host': 'prx01.mcp-odl-ha.local'}
2018-09-30 08:29:31,528 [salt.state       :1941][INFO    ][3260] Completed state [prx01.mcp-odl-ha.local] at time 08:29:31.528439 duration_in_ms=5.346
2018-09-30 08:29:31,528 [salt.state       :1770][INFO    ][3260] Running state [kvm01] at time 08:29:31.528864
2018-09-30 08:29:31,529 [salt.state       :1803][INFO    ][3260] Executing state host.present for [kvm01]
2018-09-30 08:29:31,534 [salt.state       :290 ][INFO    ][3260] {'host': 'kvm01'}
2018-09-30 08:29:31,534 [salt.state       :1941][INFO    ][3260] Completed state [kvm01] at time 08:29:31.534385 duration_in_ms=5.521
2018-09-30 08:29:31,534 [salt.state       :1770][INFO    ][3260] Running state [kvm01.mcp-odl-ha.local] at time 08:29:31.534782
2018-09-30 08:29:31,535 [salt.state       :1803][INFO    ][3260] Executing state host.present for [kvm01.mcp-odl-ha.local]
2018-09-30 08:29:31,546 [salt.state       :290 ][INFO    ][3260] {'host': 'kvm01.mcp-odl-ha.local'}
2018-09-30 08:29:31,546 [salt.state       :1941][INFO    ][3260] Completed state [kvm01.mcp-odl-ha.local] at time 08:29:31.546603 duration_in_ms=11.821
2018-09-30 08:29:31,547 [salt.state       :1770][INFO    ][3260] Running state [kvm03] at time 08:29:31.547075
2018-09-30 08:29:31,547 [salt.state       :1803][INFO    ][3260] Executing state host.present for [kvm03]
2018-09-30 08:29:31,564 [salt.state       :290 ][INFO    ][3260] {'host': 'kvm03'}
2018-09-30 08:29:31,564 [salt.state       :1941][INFO    ][3260] Completed state [kvm03] at time 08:29:31.564757 duration_in_ms=17.683
2018-09-30 08:29:31,565 [salt.state       :1770][INFO    ][3260] Running state [kvm03.mcp-odl-ha.local] at time 08:29:31.565195
2018-09-30 08:29:31,565 [salt.state       :1803][INFO    ][3260] Executing state host.present for [kvm03.mcp-odl-ha.local]
2018-09-30 08:29:31,570 [salt.state       :290 ][INFO    ][3260] {'host': 'kvm03.mcp-odl-ha.local'}
2018-09-30 08:29:31,570 [salt.state       :1941][INFO    ][3260] Completed state [kvm03.mcp-odl-ha.local] at time 08:29:31.570494 duration_in_ms=5.299
2018-09-30 08:29:31,570 [salt.state       :1770][INFO    ][3260] Running state [kvm02] at time 08:29:31.570872
2018-09-30 08:29:31,571 [salt.state       :1803][INFO    ][3260] Executing state host.present for [kvm02]
2018-09-30 08:29:31,576 [salt.state       :290 ][INFO    ][3260] {'host': 'kvm02'}
2018-09-30 08:29:31,576 [salt.state       :1941][INFO    ][3260] Completed state [kvm02] at time 08:29:31.576399 duration_in_ms=5.527
2018-09-30 08:29:31,576 [salt.state       :1770][INFO    ][3260] Running state [kvm02.mcp-odl-ha.local] at time 08:29:31.576825
2018-09-30 08:29:31,577 [salt.state       :1803][INFO    ][3260] Executing state host.present for [kvm02.mcp-odl-ha.local]
2018-09-30 08:29:31,582 [salt.state       :290 ][INFO    ][3260] {'host': 'kvm02.mcp-odl-ha.local'}
2018-09-30 08:29:31,582 [salt.state       :1941][INFO    ][3260] Completed state [kvm02.mcp-odl-ha.local] at time 08:29:31.582330 duration_in_ms=5.505
2018-09-30 08:29:31,582 [salt.state       :1770][INFO    ][3260] Running state [dbs] at time 08:29:31.582592
2018-09-30 08:29:31,582 [salt.state       :1803][INFO    ][3260] Executing state host.present for [dbs]
2018-09-30 08:29:31,588 [salt.state       :290 ][INFO    ][3260] {'host': 'dbs'}
2018-09-30 08:29:31,588 [salt.state       :1941][INFO    ][3260] Completed state [dbs] at time 08:29:31.588318 duration_in_ms=5.726
2018-09-30 08:29:31,588 [salt.state       :1770][INFO    ][3260] Running state [dbs.mcp-odl-ha.local] at time 08:29:31.588584
2018-09-30 08:29:31,588 [salt.state       :1803][INFO    ][3260] Executing state host.present for [dbs.mcp-odl-ha.local]
2018-09-30 08:29:31,594 [salt.state       :290 ][INFO    ][3260] {'host': 'dbs.mcp-odl-ha.local'}
2018-09-30 08:29:31,594 [salt.state       :1941][INFO    ][3260] Completed state [dbs.mcp-odl-ha.local] at time 08:29:31.594374 duration_in_ms=5.79
2018-09-30 08:29:31,594 [salt.state       :1770][INFO    ][3260] Running state [prx] at time 08:29:31.594769
2018-09-30 08:29:31,595 [salt.state       :1803][INFO    ][3260] Executing state host.present for [prx]
2018-09-30 08:29:31,600 [salt.state       :290 ][INFO    ][3260] {'host': 'prx'}
2018-09-30 08:29:31,600 [salt.state       :1941][INFO    ][3260] Completed state [prx] at time 08:29:31.600782 duration_in_ms=6.012
2018-09-30 08:29:31,601 [salt.state       :1770][INFO    ][3260] Running state [prx.mcp-odl-ha.local] at time 08:29:31.601251
2018-09-30 08:29:31,601 [salt.state       :1803][INFO    ][3260] Executing state host.present for [prx.mcp-odl-ha.local]
2018-09-30 08:29:31,606 [salt.state       :290 ][INFO    ][3260] {'host': 'prx.mcp-odl-ha.local'}
2018-09-30 08:29:31,606 [salt.state       :1941][INFO    ][3260] Completed state [prx.mcp-odl-ha.local] at time 08:29:31.606450 duration_in_ms=5.2
2018-09-30 08:29:31,606 [salt.state       :1770][INFO    ][3260] Running state [prx02] at time 08:29:31.606858
2018-09-30 08:29:31,607 [salt.state       :1803][INFO    ][3260] Executing state host.present for [prx02]
2018-09-30 08:29:31,612 [salt.state       :290 ][INFO    ][3260] {'host': 'prx02'}
2018-09-30 08:29:31,612 [salt.state       :1941][INFO    ][3260] Completed state [prx02] at time 08:29:31.612498 duration_in_ms=5.64
2018-09-30 08:29:31,612 [salt.state       :1770][INFO    ][3260] Running state [prx02.mcp-odl-ha.local] at time 08:29:31.612928
2018-09-30 08:29:31,613 [salt.state       :1803][INFO    ][3260] Executing state host.present for [prx02.mcp-odl-ha.local]
2018-09-30 08:29:31,618 [salt.state       :290 ][INFO    ][3260] {'host': 'prx02.mcp-odl-ha.local'}
2018-09-30 08:29:31,618 [salt.state       :1941][INFO    ][3260] Completed state [prx02.mcp-odl-ha.local] at time 08:29:31.618473 duration_in_ms=5.545
2018-09-30 08:29:31,618 [salt.state       :1770][INFO    ][3260] Running state [msg02] at time 08:29:31.618915
2018-09-30 08:29:31,619 [salt.state       :1803][INFO    ][3260] Executing state host.present for [msg02]
2018-09-30 08:29:31,624 [salt.state       :290 ][INFO    ][3260] {'host': 'msg02'}
2018-09-30 08:29:31,624 [salt.state       :1941][INFO    ][3260] Completed state [msg02] at time 08:29:31.624415 duration_in_ms=5.499
2018-09-30 08:29:31,624 [salt.state       :1770][INFO    ][3260] Running state [msg02.mcp-odl-ha.local] at time 08:29:31.624815
2018-09-30 08:29:31,625 [salt.state       :1803][INFO    ][3260] Executing state host.present for [msg02.mcp-odl-ha.local]
2018-09-30 08:29:31,630 [salt.state       :290 ][INFO    ][3260] {'host': 'msg02.mcp-odl-ha.local'}
2018-09-30 08:29:31,630 [salt.state       :1941][INFO    ][3260] Completed state [msg02.mcp-odl-ha.local] at time 08:29:31.630860 duration_in_ms=6.044
2018-09-30 08:29:31,631 [salt.state       :1770][INFO    ][3260] Running state [msg03] at time 08:29:31.631420
2018-09-30 08:29:31,631 [salt.state       :1803][INFO    ][3260] Executing state host.present for [msg03]
2018-09-30 08:29:31,637 [salt.state       :290 ][INFO    ][3260] {'host': 'msg03'}
2018-09-30 08:29:31,637 [salt.state       :1941][INFO    ][3260] Completed state [msg03] at time 08:29:31.637409 duration_in_ms=5.989
2018-09-30 08:29:31,637 [salt.state       :1770][INFO    ][3260] Running state [msg03.mcp-odl-ha.local] at time 08:29:31.637920
2018-09-30 08:29:31,638 [salt.state       :1803][INFO    ][3260] Executing state host.present for [msg03.mcp-odl-ha.local]
2018-09-30 08:29:31,642 [salt.state       :290 ][INFO    ][3260] {'host': 'msg03.mcp-odl-ha.local'}
2018-09-30 08:29:31,643 [salt.state       :1941][INFO    ][3260] Completed state [msg03.mcp-odl-ha.local] at time 08:29:31.643006 duration_in_ms=5.085
2018-09-30 08:29:31,643 [salt.state       :1770][INFO    ][3260] Running state [msg01] at time 08:29:31.643535
2018-09-30 08:29:31,643 [salt.state       :1803][INFO    ][3260] Executing state host.present for [msg01]
2018-09-30 08:29:31,648 [salt.state       :290 ][INFO    ][3260] {'host': 'msg01'}
2018-09-30 08:29:31,648 [salt.state       :1941][INFO    ][3260] Completed state [msg01] at time 08:29:31.648889 duration_in_ms=5.354
2018-09-30 08:29:31,649 [salt.state       :1770][INFO    ][3260] Running state [msg01.mcp-odl-ha.local] at time 08:29:31.649380
2018-09-30 08:29:31,649 [salt.state       :1803][INFO    ][3260] Executing state host.present for [msg01.mcp-odl-ha.local]
2018-09-30 08:29:31,654 [salt.state       :290 ][INFO    ][3260] {'host': 'msg01.mcp-odl-ha.local'}
2018-09-30 08:29:31,654 [salt.state       :1941][INFO    ][3260] Completed state [msg01.mcp-odl-ha.local] at time 08:29:31.654912 duration_in_ms=5.532
2018-09-30 08:29:31,655 [salt.state       :1770][INFO    ][3260] Running state [msg] at time 08:29:31.655399
2018-09-30 08:29:31,655 [salt.state       :1803][INFO    ][3260] Executing state host.present for [msg]
2018-09-30 08:29:31,660 [salt.state       :290 ][INFO    ][3260] {'host': 'msg'}
2018-09-30 08:29:31,660 [salt.state       :1941][INFO    ][3260] Completed state [msg] at time 08:29:31.660906 duration_in_ms=5.507
2018-09-30 08:29:31,661 [salt.state       :1770][INFO    ][3260] Running state [msg.mcp-odl-ha.local] at time 08:29:31.661419
2018-09-30 08:29:31,661 [salt.state       :1803][INFO    ][3260] Executing state host.present for [msg.mcp-odl-ha.local]
2018-09-30 08:29:31,666 [salt.state       :290 ][INFO    ][3260] {'host': 'msg.mcp-odl-ha.local'}
2018-09-30 08:29:31,667 [salt.state       :1941][INFO    ][3260] Completed state [msg.mcp-odl-ha.local] at time 08:29:31.667058 duration_in_ms=5.64
2018-09-30 08:29:31,667 [salt.state       :1770][INFO    ][3260] Running state [cfg01] at time 08:29:31.667590
2018-09-30 08:29:31,667 [salt.state       :1803][INFO    ][3260] Executing state host.present for [cfg01]
2018-09-30 08:29:31,668 [salt.state       :290 ][INFO    ][3260] Host cfg01 (10.167.4.11) already present
2018-09-30 08:29:31,668 [salt.state       :1941][INFO    ][3260] Completed state [cfg01] at time 08:29:31.668651 duration_in_ms=1.061
2018-09-30 08:29:31,669 [salt.state       :1770][INFO    ][3260] Running state [cfg01.mcp-odl-ha.local] at time 08:29:31.669061
2018-09-30 08:29:31,669 [salt.state       :1803][INFO    ][3260] Executing state host.present for [cfg01.mcp-odl-ha.local]
2018-09-30 08:29:31,669 [salt.state       :290 ][INFO    ][3260] Host cfg01.mcp-odl-ha.local (10.167.4.11) already present
2018-09-30 08:29:31,670 [salt.state       :1941][INFO    ][3260] Completed state [cfg01.mcp-odl-ha.local] at time 08:29:31.669995 duration_in_ms=0.934
2018-09-30 08:29:31,670 [salt.state       :1770][INFO    ][3260] Running state [cmp002] at time 08:29:31.670409
2018-09-30 08:29:31,670 [salt.state       :1803][INFO    ][3260] Executing state host.present for [cmp002]
2018-09-30 08:29:31,672 [salt.state       :290 ][INFO    ][3260] {'host': 'cmp002'}
2018-09-30 08:29:31,672 [salt.state       :1941][INFO    ][3260] Completed state [cmp002] at time 08:29:31.672830 duration_in_ms=2.421
2018-09-30 08:29:31,673 [salt.state       :1770][INFO    ][3260] Running state [cmp002.mcp-odl-ha.local] at time 08:29:31.673131
2018-09-30 08:29:31,673 [salt.state       :1803][INFO    ][3260] Executing state host.present for [cmp002.mcp-odl-ha.local]
2018-09-30 08:29:31,678 [salt.state       :290 ][INFO    ][3260] {'host': 'cmp002.mcp-odl-ha.local'}
2018-09-30 08:29:31,679 [salt.state       :1941][INFO    ][3260] Completed state [cmp002.mcp-odl-ha.local] at time 08:29:31.679037 duration_in_ms=5.906
2018-09-30 08:29:31,679 [salt.state       :1770][INFO    ][3260] Running state [cmp001] at time 08:29:31.679427
2018-09-30 08:29:31,679 [salt.state       :1803][INFO    ][3260] Executing state host.present for [cmp001]
2018-09-30 08:29:31,684 [salt.state       :290 ][INFO    ][3260] {'host': 'cmp001'}
2018-09-30 08:29:31,685 [salt.state       :1941][INFO    ][3260] Completed state [cmp001] at time 08:29:31.684966 duration_in_ms=5.539
2018-09-30 08:29:31,685 [salt.state       :1770][INFO    ][3260] Running state [cmp001.mcp-odl-ha.local] at time 08:29:31.685478
2018-09-30 08:29:31,685 [salt.state       :1803][INFO    ][3260] Executing state host.present for [cmp001.mcp-odl-ha.local]
2018-09-30 08:29:31,690 [salt.state       :290 ][INFO    ][3260] {'host': 'cmp001.mcp-odl-ha.local'}
2018-09-30 08:29:31,691 [salt.state       :1941][INFO    ][3260] Completed state [cmp001.mcp-odl-ha.local] at time 08:29:31.691074 duration_in_ms=5.597
2018-09-30 08:29:31,691 [salt.state       :1770][INFO    ][3260] Running state [dbs01] at time 08:29:31.691612
2018-09-30 08:29:31,691 [salt.state       :1803][INFO    ][3260] Executing state host.present for [dbs01]
2018-09-30 08:29:31,696 [salt.state       :290 ][INFO    ][3260] {'host': 'dbs01'}
2018-09-30 08:29:31,697 [salt.state       :1941][INFO    ][3260] Completed state [dbs01] at time 08:29:31.697079 duration_in_ms=5.467
2018-09-30 08:29:31,697 [salt.state       :1770][INFO    ][3260] Running state [dbs01.mcp-odl-ha.local] at time 08:29:31.697445
2018-09-30 08:29:31,697 [salt.state       :1803][INFO    ][3260] Executing state host.present for [dbs01.mcp-odl-ha.local]
2018-09-30 08:29:31,702 [salt.state       :290 ][INFO    ][3260] {'host': 'dbs01.mcp-odl-ha.local'}
2018-09-30 08:29:31,702 [salt.state       :1941][INFO    ][3260] Completed state [dbs01.mcp-odl-ha.local] at time 08:29:31.702870 duration_in_ms=5.424
2018-09-30 08:29:31,703 [salt.state       :1770][INFO    ][3260] Running state [dbs02] at time 08:29:31.703389
2018-09-30 08:29:31,703 [salt.state       :1803][INFO    ][3260] Executing state host.present for [dbs02]
2018-09-30 08:29:31,708 [salt.state       :290 ][INFO    ][3260] {'host': 'dbs02'}
2018-09-30 08:29:31,708 [salt.state       :1941][INFO    ][3260] Completed state [dbs02] at time 08:29:31.708911 duration_in_ms=5.522
2018-09-30 08:29:31,709 [salt.state       :1770][INFO    ][3260] Running state [dbs02.mcp-odl-ha.local] at time 08:29:31.709390
2018-09-30 08:29:31,709 [salt.state       :1803][INFO    ][3260] Executing state host.present for [dbs02.mcp-odl-ha.local]
2018-09-30 08:29:31,714 [salt.state       :290 ][INFO    ][3260] {'host': 'dbs02.mcp-odl-ha.local'}
2018-09-30 08:29:31,714 [salt.state       :1941][INFO    ][3260] Completed state [dbs02.mcp-odl-ha.local] at time 08:29:31.714876 duration_in_ms=5.486
2018-09-30 08:29:31,715 [salt.state       :1770][INFO    ][3260] Running state [dbs03] at time 08:29:31.715374
2018-09-30 08:29:31,715 [salt.state       :1803][INFO    ][3260] Executing state host.present for [dbs03]
2018-09-30 08:29:31,720 [salt.state       :290 ][INFO    ][3260] {'host': 'dbs03'}
2018-09-30 08:29:31,720 [salt.state       :1941][INFO    ][3260] Completed state [dbs03] at time 08:29:31.720810 duration_in_ms=5.437
2018-09-30 08:29:31,721 [salt.state       :1770][INFO    ][3260] Running state [dbs03.mcp-odl-ha.local] at time 08:29:31.721107
2018-09-30 08:29:31,721 [salt.state       :1803][INFO    ][3260] Executing state host.present for [dbs03.mcp-odl-ha.local]
2018-09-30 08:29:31,732 [salt.state       :290 ][INFO    ][3260] {'host': 'dbs03.mcp-odl-ha.local'}
2018-09-30 08:29:31,733 [salt.state       :1941][INFO    ][3260] Completed state [dbs03.mcp-odl-ha.local] at time 08:29:31.733167 duration_in_ms=12.06
2018-09-30 08:29:31,733 [salt.state       :1770][INFO    ][3260] Running state [odl01] at time 08:29:31.733589
2018-09-30 08:29:31,733 [salt.state       :1803][INFO    ][3260] Executing state host.present for [odl01]
2018-09-30 08:29:31,738 [salt.state       :290 ][INFO    ][3260] {'host': 'odl01'}
2018-09-30 08:29:31,738 [salt.state       :1941][INFO    ][3260] Completed state [odl01] at time 08:29:31.738705 duration_in_ms=5.116
2018-09-30 08:29:31,739 [salt.state       :1770][INFO    ][3260] Running state [odl01.mcp-odl-ha.local] at time 08:29:31.739091
2018-09-30 08:29:31,739 [salt.state       :1803][INFO    ][3260] Executing state host.present for [odl01.mcp-odl-ha.local]
2018-09-30 08:29:31,744 [salt.state       :290 ][INFO    ][3260] {'host': 'odl01.mcp-odl-ha.local'}
2018-09-30 08:29:31,744 [salt.state       :1941][INFO    ][3260] Completed state [odl01.mcp-odl-ha.local] at time 08:29:31.744282 duration_in_ms=5.192
2018-09-30 08:29:31,744 [salt.state       :1770][INFO    ][3260] Running state [mas01] at time 08:29:31.744603
2018-09-30 08:29:31,744 [salt.state       :1803][INFO    ][3260] Executing state host.present for [mas01]
2018-09-30 08:29:31,750 [salt.state       :290 ][INFO    ][3260] {'host': 'mas01'}
2018-09-30 08:29:31,750 [salt.state       :1941][INFO    ][3260] Completed state [mas01] at time 08:29:31.750199 duration_in_ms=5.595
2018-09-30 08:29:31,750 [salt.state       :1770][INFO    ][3260] Running state [mas01.mcp-odl-ha.local] at time 08:29:31.750476
2018-09-30 08:29:31,750 [salt.state       :1803][INFO    ][3260] Executing state host.present for [mas01.mcp-odl-ha.local]
2018-09-30 08:29:31,756 [salt.state       :290 ][INFO    ][3260] {'host': 'mas01.mcp-odl-ha.local'}
2018-09-30 08:29:31,756 [salt.state       :1941][INFO    ][3260] Completed state [mas01.mcp-odl-ha.local] at time 08:29:31.756171 duration_in_ms=5.695
2018-09-30 08:29:31,756 [salt.state       :1770][INFO    ][3260] Running state [ctl02] at time 08:29:31.756446
2018-09-30 08:29:31,756 [salt.state       :1803][INFO    ][3260] Executing state host.present for [ctl02]
2018-09-30 08:29:31,762 [salt.state       :290 ][INFO    ][3260] {'host': 'ctl02'}
2018-09-30 08:29:31,762 [salt.state       :1941][INFO    ][3260] Completed state [ctl02] at time 08:29:31.762253 duration_in_ms=5.807
2018-09-30 08:29:31,762 [salt.state       :1770][INFO    ][3260] Running state [ctl02.mcp-odl-ha.local] at time 08:29:31.762549
2018-09-30 08:29:31,762 [salt.state       :1803][INFO    ][3260] Executing state host.present for [ctl02.mcp-odl-ha.local]
2018-09-30 08:29:31,768 [salt.state       :290 ][INFO    ][3260] {'host': 'ctl02.mcp-odl-ha.local'}
2018-09-30 08:29:31,768 [salt.state       :1941][INFO    ][3260] Completed state [ctl02.mcp-odl-ha.local] at time 08:29:31.768187 duration_in_ms=5.639
2018-09-30 08:29:31,768 [salt.state       :1770][INFO    ][3260] Running state [ctl03] at time 08:29:31.768460
2018-09-30 08:29:31,768 [salt.state       :1803][INFO    ][3260] Executing state host.present for [ctl03]
2018-09-30 08:29:31,774 [salt.state       :290 ][INFO    ][3260] {'host': 'ctl03'}
2018-09-30 08:29:31,774 [salt.state       :1941][INFO    ][3260] Completed state [ctl03] at time 08:29:31.774203 duration_in_ms=5.744
2018-09-30 08:29:31,774 [salt.state       :1770][INFO    ][3260] Running state [ctl03.mcp-odl-ha.local] at time 08:29:31.774460
2018-09-30 08:29:31,774 [salt.state       :1803][INFO    ][3260] Executing state host.present for [ctl03.mcp-odl-ha.local]
2018-09-30 08:29:31,780 [salt.state       :290 ][INFO    ][3260] {'host': 'ctl03.mcp-odl-ha.local'}
2018-09-30 08:29:31,780 [salt.state       :1941][INFO    ][3260] Completed state [ctl03.mcp-odl-ha.local] at time 08:29:31.780194 duration_in_ms=5.734
2018-09-30 08:29:31,780 [salt.state       :1770][INFO    ][3260] Running state [ctl01] at time 08:29:31.780464
2018-09-30 08:29:31,780 [salt.state       :1803][INFO    ][3260] Executing state host.present for [ctl01]
2018-09-30 08:29:31,786 [salt.state       :290 ][INFO    ][3260] {'host': 'ctl01'}
2018-09-30 08:29:31,786 [salt.state       :1941][INFO    ][3260] Completed state [ctl01] at time 08:29:31.786239 duration_in_ms=5.775
2018-09-30 08:29:31,786 [salt.state       :1770][INFO    ][3260] Running state [ctl01.mcp-odl-ha.local] at time 08:29:31.786514
2018-09-30 08:29:31,786 [salt.state       :1803][INFO    ][3260] Executing state host.present for [ctl01.mcp-odl-ha.local]
2018-09-30 08:29:31,792 [salt.state       :290 ][INFO    ][3260] {'host': 'ctl01.mcp-odl-ha.local'}
2018-09-30 08:29:31,792 [salt.state       :1941][INFO    ][3260] Completed state [ctl01.mcp-odl-ha.local] at time 08:29:31.792220 duration_in_ms=5.706
2018-09-30 08:29:31,792 [salt.state       :1770][INFO    ][3260] Running state [ctl] at time 08:29:31.792491
2018-09-30 08:29:31,792 [salt.state       :1803][INFO    ][3260] Executing state host.present for [ctl]
2018-09-30 08:29:31,798 [salt.state       :290 ][INFO    ][3260] {'host': 'ctl'}
2018-09-30 08:29:31,798 [salt.state       :1941][INFO    ][3260] Completed state [ctl] at time 08:29:31.798234 duration_in_ms=5.743
2018-09-30 08:29:31,798 [salt.state       :1770][INFO    ][3260] Running state [ctl.mcp-odl-ha.local] at time 08:29:31.798491
2018-09-30 08:29:31,798 [salt.state       :1803][INFO    ][3260] Executing state host.present for [ctl.mcp-odl-ha.local]
2018-09-30 08:29:31,804 [salt.state       :290 ][INFO    ][3260] {'host': 'ctl.mcp-odl-ha.local'}
2018-09-30 08:29:31,804 [salt.state       :1941][INFO    ][3260] Completed state [ctl.mcp-odl-ha.local] at time 08:29:31.804268 duration_in_ms=5.777
2018-09-30 08:29:31,804 [salt.state       :1770][INFO    ][3260] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 08:29:31.804448
2018-09-30 08:29:31,804 [salt.state       :1803][INFO    ][3260] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-09-30 08:29:31,804 [salt.state       :290 ][INFO    ][3260] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-09-30 08:29:31,805 [salt.state       :1941][INFO    ][3260] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 08:29:31.805057 duration_in_ms=0.609
2018-09-30 08:29:31,806 [salt.state       :1770][INFO    ][3260] Running state [ens3] at time 08:29:31.806225
2018-09-30 08:29:31,806 [salt.state       :1803][INFO    ][3260] Executing state network.managed for [ens3]
2018-09-30 08:29:31,918 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['ifup', 'ens3'] in directory '/root'
2018-09-30 08:29:32,645 [salt.state       :290 ][INFO    ][3260] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-09-30 08:29:32,646 [salt.state       :1941][INFO    ][3260] Completed state [ens3] at time 08:29:32.646193 duration_in_ms=839.968
2018-09-30 08:29:32,646 [salt.state       :1770][INFO    ][3260] Running state [ens2] at time 08:29:32.646482
2018-09-30 08:29:32,646 [salt.state       :1803][INFO    ][3260] Executing state network.managed for [ens2]
2018-09-30 08:29:32,669 [salt.state       :290 ][INFO    ][3260] {'interface': 'Added network interface.'}
2018-09-30 08:29:32,670 [salt.state       :1941][INFO    ][3260] Completed state [ens2] at time 08:29:32.670158 duration_in_ms=23.675
2018-09-30 08:29:32,670 [salt.state       :1770][INFO    ][3260] Running state [linux_system_network] at time 08:29:32.670566
2018-09-30 08:29:32,670 [salt.state       :1803][INFO    ][3260] Executing state network.system for [linux_system_network]
2018-09-30 08:29:32,671 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-09-30 08:29:32,685 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-09-30 08:29:32,704 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-09-30 08:29:32,724 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-09-30 08:29:33,180 [salt.loaded.int.module.debian_ip:1970][WARNING ][3260] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-09-30 08:29:33,181 [salt.state       :290 ][INFO    ][3260] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb01\n\n+DOMAIN=mcp-odl-ha.local\n\n+SEARCH=maas\n'}
2018-09-30 08:29:33,182 [salt.state       :1941][INFO    ][3260] Completed state [linux_system_network] at time 08:29:33.182158 duration_in_ms=511.598
2018-09-30 08:29:33,182 [salt.state       :1770][INFO    ][3260] Running state [/etc/profile.d/proxy.sh] at time 08:29:33.182775
2018-09-30 08:29:33,184 [salt.state       :1803][INFO    ][3260] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-09-30 08:29:33,185 [salt.state       :290 ][INFO    ][3260] File /etc/profile.d/proxy.sh is not present
2018-09-30 08:29:33,186 [salt.state       :1941][INFO    ][3260] Completed state [/etc/profile.d/proxy.sh] at time 08:29:33.186020 duration_in_ms=3.245
2018-09-30 08:29:33,186 [salt.state       :1770][INFO    ][3260] Running state [/etc/apt/apt.conf.d/95proxies] at time 08:29:33.186481
2018-09-30 08:29:33,187 [salt.state       :1803][INFO    ][3260] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-09-30 08:29:33,187 [salt.state       :290 ][INFO    ][3260] File /etc/apt/apt.conf.d/95proxies is not present
2018-09-30 08:29:33,187 [salt.state       :1941][INFO    ][3260] Completed state [/etc/apt/apt.conf.d/95proxies] at time 08:29:33.187914 duration_in_ms=1.433
2018-09-30 08:29:33,190 [salt.state       :1770][INFO    ][3260] Running state [ntp] at time 08:29:33.190267
2018-09-30 08:29:33,190 [salt.state       :1803][INFO    ][3260] Executing state pkg.installed for [ntp]
2018-09-30 08:29:33,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 08:29:33,423 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-09-30 08:29:40,379 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930082940364724
2018-09-30 08:29:40,403 [salt.minion      :1431][INFO    ][6570] Starting a new job with PID 6570
2018-09-30 08:29:40,420 [salt.minion      :1708][INFO    ][6570] Returning information for job: 20180930082940364724
2018-09-30 08:29:40,871 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 08:29:40,902 [salt.state       :290 ][INFO    ][3260] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-09-30 08:29:40,915 [salt.state       :905 ][INFO    ][3260] Loading fresh modules for state activity
2018-09-30 08:29:40,939 [salt.state       :1941][INFO    ][3260] Completed state [ntp] at time 08:29:40.939614 duration_in_ms=7749.346
2018-09-30 08:29:40,943 [salt.state       :1770][INFO    ][3260] Running state [/etc/ntp.conf] at time 08:29:40.943186
2018-09-30 08:29:40,943 [salt.state       :1803][INFO    ][3260] Executing state file.managed for [/etc/ntp.conf]
2018-09-30 08:29:41,284 [salt.fileclient  :1215][INFO    ][3260] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-09-30 08:29:41,353 [salt.state       :290 ][INFO    ][3260] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.pool.ntp.org iburst
+server 0.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-09-30 08:29:41,354 [salt.state       :1941][INFO    ][3260] Completed state [/etc/ntp.conf] at time 08:29:41.354046 duration_in_ms=410.86
2018-09-30 08:29:41,735 [salt.state       :1770][INFO    ][3260] Running state [ntp] at time 08:29:41.735712
2018-09-30 08:29:41,736 [salt.state       :1803][INFO    ][3260] Executing state service.running for [ntp]
2018-09-30 08:29:41,737 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-09-30 08:29:41,752 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-09-30 08:29:41,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-09-30 08:29:41,777 [salt.state       :290 ][INFO    ][3260] The service ntp is already running
2018-09-30 08:29:41,778 [salt.state       :1941][INFO    ][3260] Completed state [ntp] at time 08:29:41.778166 duration_in_ms=42.454
2018-09-30 08:29:41,778 [salt.state       :1770][INFO    ][3260] Running state [ntp] at time 08:29:41.778503
2018-09-30 08:29:41,778 [salt.state       :1803][INFO    ][3260] Executing state service.mod_watch for [ntp]
2018-09-30 08:29:41,779 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-09-30 08:29:41,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3260] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-09-30 08:29:41,856 [salt.state       :290 ][INFO    ][3260] {'ntp': True}
2018-09-30 08:29:41,856 [salt.state       :1941][INFO    ][3260] Completed state [ntp] at time 08:29:41.856743 duration_in_ms=78.239
2018-09-30 08:29:41,864 [salt.minion      :1708][INFO    ][3260] Returning information for job: 20180930082853930907
2018-09-30 08:29:52,380 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20180930082952372606
2018-09-30 08:29:52,405 [salt.minion      :1431][INFO    ][6685] Starting a new job with PID 6685
2018-09-30 08:29:52,439 [salt.minion      :1708][INFO    ][6685] Returning information for job: 20180930082952372606
2018-09-30 08:30:35,229 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command pkg.upgrade with jid 20180930083035217284
2018-09-30 08:30:35,255 [salt.minion      :1431][INFO    ][6701] Starting a new job with PID 6701
2018-09-30 08:30:35,294 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6701] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 08:30:35,901 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6701] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-09-30 08:30:40,337 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930083040324694
2018-09-30 08:30:40,367 [salt.minion      :1431][INFO    ][6767] Starting a new job with PID 6767
2018-09-30 08:30:40,397 [salt.minion      :1708][INFO    ][6767] Returning information for job: 20180930083040324694
2018-09-30 08:30:50,396 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930083050384528
2018-09-30 08:30:50,428 [salt.minion      :1431][INFO    ][6901] Starting a new job with PID 6901
2018-09-30 08:30:50,472 [salt.minion      :1708][INFO    ][6901] Returning information for job: 20180930083050384528
2018-09-30 08:31:00,481 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930083100469503
2018-09-30 08:31:00,520 [salt.minion      :1431][INFO    ][7014] Starting a new job with PID 7014
2018-09-30 08:31:00,557 [salt.minion      :1708][INFO    ][7014] Returning information for job: 20180930083100469503
2018-09-30 08:31:10,516 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930083110505991
2018-09-30 08:31:10,540 [salt.minion      :1431][INFO    ][7144] Starting a new job with PID 7144
2018-09-30 08:31:10,596 [salt.minion      :1708][INFO    ][7144] Returning information for job: 20180930083110505991
2018-09-30 08:31:20,588 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930083120576939
2018-09-30 08:31:20,613 [salt.minion      :1431][INFO    ][7662] Starting a new job with PID 7662
2018-09-30 08:31:20,643 [salt.minion      :1708][INFO    ][7662] Returning information for job: 20180930083120576939
2018-09-30 08:31:30,717 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930083130706740
2018-09-30 08:31:30,750 [salt.minion      :1431][INFO    ][7850] Starting a new job with PID 7850
2018-09-30 08:31:30,785 [salt.minion      :1708][INFO    ][7850] Returning information for job: 20180930083130706740
2018-09-30 08:31:35,439 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6701] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 08:31:35,497 [salt.minion      :1708][INFO    ][6701] Returning information for job: 20180930083035217284
2018-09-30 08:44:37,632 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command test.ping with jid 20180930084437620953
2018-09-30 08:44:37,662 [salt.minion      :1431][INFO    ][8097] Starting a new job with PID 8097
2018-09-30 08:44:37,701 [salt.minion      :1708][INFO    ][8097] Returning information for job: 20180930084437620953
2018-09-30 08:48:14,835 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command state.sls with jid 20180930084814823597
2018-09-30 08:48:14,860 [salt.minion      :1431][INFO    ][8113] Starting a new job with PID 8113
2018-09-30 08:48:15,678 [salt.state       :905 ][INFO    ][8113] Loading fresh modules for state activity
2018-09-30 08:48:15,749 [salt.fileclient  :1215][INFO    ][8113] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-09-30 08:48:15,785 [salt.fileclient  :1215][INFO    ][8113] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-09-30 08:48:16,544 [salt.state       :1770][INFO    ][8113] Running state [keepalived] at time 08:48:16.544025
2018-09-30 08:48:16,545 [salt.state       :1803][INFO    ][8113] Executing state pkg.installed for [keepalived]
2018-09-30 08:48:16,547 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 08:48:17,069 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-09-30 08:48:17,280 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-30 08:48:19,338 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 08:48:19,380 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-09-30 08:48:19,896 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930084819882794
2018-09-30 08:48:19,917 [salt.minion      :1431][INFO    ][8490] Starting a new job with PID 8490
2018-09-30 08:48:19,931 [salt.minion      :1708][INFO    ][8490] Returning information for job: 20180930084819882794
2018-09-30 08:48:28,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 08:48:28,368 [salt.state       :290 ][INFO    ][8113] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-09-30 08:48:28,392 [salt.state       :905 ][INFO    ][8113] Loading fresh modules for state activity
2018-09-30 08:48:28,431 [salt.state       :1941][INFO    ][8113] Completed state [keepalived] at time 08:48:28.431675 duration_in_ms=11887.65
2018-09-30 08:48:28,442 [salt.state       :1770][INFO    ][8113] Running state [lsof] at time 08:48:28.442209
2018-09-30 08:48:28,443 [salt.state       :1803][INFO    ][8113] Executing state pkg.installed for [lsof]
2018-09-30 08:48:29,039 [salt.state       :290 ][INFO    ][8113] All specified packages are already installed
2018-09-30 08:48:29,040 [salt.state       :1941][INFO    ][8113] Completed state [lsof] at time 08:48:29.040083 duration_in_ms=597.875
2018-09-30 08:48:29,042 [salt.state       :1770][INFO    ][8113] Running state [/etc/keepalived/keepalived.conf] at time 08:48:29.042874
2018-09-30 08:48:29,043 [salt.state       :1803][INFO    ][8113] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-09-30 08:48:29,066 [salt.fileclient  :1215][INFO    ][8113] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-09-30 08:48:29,100 [salt.state       :290 ][INFO    ][8113] File changed:
New file
2018-09-30 08:48:29,100 [salt.state       :1941][INFO    ][8113] Completed state [/etc/keepalived/keepalived.conf] at time 08:48:29.100747 duration_in_ms=57.872
2018-09-30 08:48:29,101 [salt.state       :1770][INFO    ][8113] Running state [keepalived] at time 08:48:29.101653
2018-09-30 08:48:29,102 [salt.state       :1803][INFO    ][8113] Executing state service.running for [keepalived]
2018-09-30 08:48:29,102 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-09-30 08:48:29,132 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-09-30 08:48:29,151 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-09-30 08:48:29,170 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-09-30 08:48:29,274 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-09-30 08:48:29,313 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-09-30 08:48:29,341 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8113] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-09-30 08:48:29,363 [salt.state       :290 ][INFO    ][8113] {'keepalived': True}
2018-09-30 08:48:29,363 [salt.state       :1941][INFO    ][8113] Completed state [keepalived] at time 08:48:29.363801 duration_in_ms=262.147
2018-09-30 08:48:29,366 [salt.minion      :1708][INFO    ][8113] Returning information for job: 20180930084814823597
2018-09-30 08:49:20,364 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command pillar.get with jid 20180930084920358544
2018-09-30 08:49:20,397 [salt.minion      :1431][INFO    ][9469] Starting a new job with PID 9469
2018-09-30 08:49:20,409 [salt.minion      :1708][INFO    ][9469] Returning information for job: 20180930084920358544
2018-09-30 09:03:48,091 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command state.sls with jid 20180930090348084374
2018-09-30 09:03:48,117 [salt.minion      :1431][INFO    ][9505] Starting a new job with PID 9505
2018-09-30 09:03:53,216 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930090353212153
2018-09-30 09:03:53,225 [salt.state       :905 ][INFO    ][9505] Loading fresh modules for state activity
2018-09-30 09:03:53,266 [salt.minion      :1431][INFO    ][9512] Starting a new job with PID 9512
2018-09-30 09:03:53,294 [salt.minion      :1708][INFO    ][9512] Returning information for job: 20180930090353212153
2018-09-30 09:03:53,380 [salt.fileclient  :1215][INFO    ][9505] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-09-30 09:03:53,413 [salt.fileclient  :1215][INFO    ][9505] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-09-30 09:03:53,439 [salt.fileclient  :1215][INFO    ][9505] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-09-30 09:03:54,112 [salt.state       :1770][INFO    ][9505] Running state [memcached] at time 09:03:54.112066
2018-09-30 09:03:54,112 [salt.state       :1803][INFO    ][9505] Executing state pkg.installed for [memcached]
2018-09-30 09:03:54,113 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:03:54,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-09-30 09:03:54,792 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-30 09:03:56,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:03:56,828 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-09-30 09:04:03,291 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930090403282765
2018-09-30 09:04:03,308 [salt.minion      :1431][INFO    ][10286] Starting a new job with PID 10286
2018-09-30 09:04:03,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:04:03,339 [salt.minion      :1708][INFO    ][10286] Returning information for job: 20180930090403282765
2018-09-30 09:04:03,350 [salt.state       :290 ][INFO    ][9505] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-09-30 09:04:03,366 [salt.state       :905 ][INFO    ][9505] Loading fresh modules for state activity
2018-09-30 09:04:03,395 [salt.state       :1941][INFO    ][9505] Completed state [memcached] at time 09:04:03.395411 duration_in_ms=9283.345
2018-09-30 09:04:03,405 [salt.state       :1770][INFO    ][9505] Running state [python-memcache] at time 09:04:03.405849
2018-09-30 09:04:03,406 [salt.state       :1803][INFO    ][9505] Executing state pkg.installed for [python-memcache]
2018-09-30 09:04:04,013 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:04:04,055 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-09-30 09:04:07,302 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:04:07,370 [salt.state       :290 ][INFO    ][9505] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-09-30 09:04:07,396 [salt.state       :905 ][INFO    ][9505] Loading fresh modules for state activity
2018-09-30 09:04:07,440 [salt.state       :1941][INFO    ][9505] Completed state [python-memcache] at time 09:04:07.440574 duration_in_ms=4034.725
2018-09-30 09:04:07,445 [salt.state       :1770][INFO    ][9505] Running state [/etc/memcached.conf] at time 09:04:07.445938
2018-09-30 09:04:07,446 [salt.state       :1803][INFO    ][9505] Executing state file.managed for [/etc/memcached.conf]
2018-09-30 09:04:07,486 [salt.fileclient  :1215][INFO    ][9505] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-09-30 09:04:07,536 [salt.state       :290 ][INFO    ][9505] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-09-30 09:04:07,536 [salt.state       :1941][INFO    ][9505] Completed state [/etc/memcached.conf] at time 09:04:07.536517 duration_in_ms=90.578
2018-09-30 09:04:07,950 [salt.state       :1770][INFO    ][9505] Running state [memcached] at time 09:04:07.950745
2018-09-30 09:04:07,951 [salt.state       :1803][INFO    ][9505] Executing state service.running for [memcached]
2018-09-30 09:04:07,951 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-09-30 09:04:07,968 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-09-30 09:04:07,982 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-09-30 09:04:07,994 [salt.state       :290 ][INFO    ][9505] The service memcached is already running
2018-09-30 09:04:07,994 [salt.state       :1941][INFO    ][9505] Completed state [memcached] at time 09:04:07.994776 duration_in_ms=44.031
2018-09-30 09:04:07,995 [salt.state       :1770][INFO    ][9505] Running state [memcached] at time 09:04:07.995067
2018-09-30 09:04:07,995 [salt.state       :1803][INFO    ][9505] Executing state service.mod_watch for [memcached]
2018-09-30 09:04:07,996 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-09-30 09:04:08,008 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9505] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-09-30 09:04:08,030 [salt.state       :290 ][INFO    ][9505] {'memcached': True}
2018-09-30 09:04:08,030 [salt.state       :1941][INFO    ][9505] Completed state [memcached] at time 09:04:08.030717 duration_in_ms=35.649
2018-09-30 09:04:08,033 [salt.minion      :1708][INFO    ][9505] Returning information for job: 20180930090348084374
2018-09-30 09:04:09,292 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command state.sls with jid 20180930090409283633
2018-09-30 09:04:09,325 [salt.minion      :1431][INFO    ][10494] Starting a new job with PID 10494
2018-09-30 09:04:14,775 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930090414769044
2018-09-30 09:04:14,787 [salt.state       :905 ][INFO    ][10494] Loading fresh modules for state activity
2018-09-30 09:04:14,823 [salt.minion      :1431][INFO    ][10501] Starting a new job with PID 10501
2018-09-30 09:04:14,850 [salt.minion      :1708][INFO    ][10501] Returning information for job: 20180930090414769044
2018-09-30 09:04:16,135 [salt.fileclient  :1215][INFO    ][10494] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-09-30 09:04:16,174 [salt.fileclient  :1215][INFO    ][10494] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-09-30 09:04:16,817 [salt.state       :1770][INFO    ][10494] Running state [haproxy] at time 09:04:16.817002
2018-09-30 09:04:16,817 [salt.state       :1803][INFO    ][10494] Executing state pkg.installed for [haproxy]
2018-09-30 09:04:16,818 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:04:17,287 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-09-30 09:04:17,490 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-30 09:04:19,429 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:04:19,477 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-09-30 09:04:24,792 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930090424779795
2018-09-30 09:04:24,824 [salt.minion      :1431][INFO    ][11119] Starting a new job with PID 11119
2018-09-30 09:04:24,867 [salt.minion      :1708][INFO    ][11119] Returning information for job: 20180930090424779795
2018-09-30 09:04:28,981 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:04:29,020 [salt.state       :290 ][INFO    ][10494] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-09-30 09:04:29,044 [salt.state       :905 ][INFO    ][10494] Loading fresh modules for state activity
2018-09-30 09:04:29,083 [salt.state       :1941][INFO    ][10494] Completed state [haproxy] at time 09:04:29.082847 duration_in_ms=12265.846
2018-09-30 09:04:29,088 [salt.state       :1770][INFO    ][10494] Running state [/etc/default/haproxy] at time 09:04:29.088720
2018-09-30 09:04:29,089 [salt.state       :1803][INFO    ][10494] Executing state file.managed for [/etc/default/haproxy]
2018-09-30 09:04:29,113 [salt.fileclient  :1215][INFO    ][10494] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-09-30 09:04:29,116 [salt.state       :290 ][INFO    ][10494] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-09-30 09:04:29,118 [salt.state       :1941][INFO    ][10494] Completed state [/etc/default/haproxy] at time 09:04:29.118856 duration_in_ms=30.136
2018-09-30 09:04:29,119 [salt.state       :1770][INFO    ][10494] Running state [/etc/haproxy/haproxy.cfg] at time 09:04:29.119359
2018-09-30 09:04:29,119 [salt.state       :1803][INFO    ][10494] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-09-30 09:04:29,134 [salt.fileclient  :1215][INFO    ][10494] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-09-30 09:04:29,244 [salt.state       :290 ][INFO    ][10494] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 10.167.4.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8777 check
+  server mdb02 10.167.4.33:8777 check
+  server mdb03 10.167.4.34:8777 check
+
+listen panko_api
+  bind 10.167.4.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8977 check
+  server mdb02 10.167.4.33:8977 check
+  server mdb03 10.167.4.34:8977 check
+
+listen gnocchi_api
+  bind 10.167.4.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8041 check
+  server mdb02 10.167.4.33:8041 check
+  server mdb03 10.167.4.34:8041 check
+
+listen aodh-api
+  bind 10.167.4.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 10.167.4.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 10.167.4.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-09-30 09:04:29,252 [salt.state       :1941][INFO    ][10494] Completed state [/etc/haproxy/haproxy.cfg] at time 09:04:29.252263 duration_in_ms=132.904
2018-09-30 09:04:29,252 [salt.state       :1770][INFO    ][10494] Running state [/etc/haproxy/ssl] at time 09:04:29.252594
2018-09-30 09:04:29,252 [salt.state       :1803][INFO    ][10494] Executing state file.directory for [/etc/haproxy/ssl]
2018-09-30 09:04:29,254 [salt.state       :290 ][INFO    ][10494] {'/etc/haproxy/ssl': 'New Dir'}
2018-09-30 09:04:29,254 [salt.state       :1941][INFO    ][10494] Completed state [/etc/haproxy/ssl] at time 09:04:29.254149 duration_in_ms=1.555
2018-09-30 09:04:29,254 [salt.state       :1770][INFO    ][10494] Running state [/etc/haproxy/errors/429.http11] at time 09:04:29.254371
2018-09-30 09:04:29,254 [salt.state       :1803][INFO    ][10494] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-09-30 09:04:29,279 [salt.fileclient  :1215][INFO    ][10494] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-09-30 09:04:29,286 [salt.state       :290 ][INFO    ][10494] File changed:
New file
2018-09-30 09:04:29,287 [salt.state       :1941][INFO    ][10494] Completed state [/etc/haproxy/errors/429.http11] at time 09:04:29.287098 duration_in_ms=32.727
2018-09-30 09:04:29,288 [salt.state       :1770][INFO    ][10494] Running state [haproxy_status_packages] at time 09:04:29.288260
2018-09-30 09:04:29,288 [salt.state       :1803][INFO    ][10494] Executing state pkg.installed for [haproxy_status_packages]
2018-09-30 09:04:29,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:04:29,824 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-09-30 09:04:32,657 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:04:32,724 [salt.state       :290 ][INFO    ][10494] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-09-30 09:04:32,751 [salt.state       :905 ][INFO    ][10494] Loading fresh modules for state activity
2018-09-30 09:04:32,789 [salt.state       :1941][INFO    ][10494] Completed state [haproxy_status_packages] at time 09:04:32.789847 duration_in_ms=3501.586
2018-09-30 09:04:32,794 [salt.state       :1770][INFO    ][10494] Running state [/usr/bin/haproxy-status.sh] at time 09:04:32.794485
2018-09-30 09:04:32,794 [salt.state       :1803][INFO    ][10494] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-09-30 09:04:32,820 [salt.fileclient  :1215][INFO    ][10494] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-09-30 09:04:32,846 [salt.state       :290 ][INFO    ][10494] File changed:
New file
2018-09-30 09:04:32,846 [salt.state       :1941][INFO    ][10494] Completed state [/usr/bin/haproxy-status.sh] at time 09:04:32.846825 duration_in_ms=52.34
2018-09-30 09:04:32,848 [salt.state       :1770][INFO    ][10494] Running state [net.ipv4.ip_nonlocal_bind] at time 09:04:32.848875
2018-09-30 09:04:32,849 [salt.state       :1803][INFO    ][10494] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-09-30 09:04:32,851 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-09-30 09:04:32,862 [salt.state       :290 ][INFO    ][10494] {'net.ipv4.ip_nonlocal_bind': 1}
2018-09-30 09:04:32,863 [salt.state       :1941][INFO    ][10494] Completed state [net.ipv4.ip_nonlocal_bind] at time 09:04:32.863097 duration_in_ms=14.222
2018-09-30 09:04:33,177 [salt.state       :1770][INFO    ][10494] Running state [haproxy] at time 09:04:33.177303
2018-09-30 09:04:33,177 [salt.state       :1803][INFO    ][10494] Executing state service.running for [haproxy]
2018-09-30 09:04:33,178 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-09-30 09:04:33,201 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-09-30 09:04:33,219 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-09-30 09:04:33,237 [salt.state       :290 ][INFO    ][10494] The service haproxy is already running
2018-09-30 09:04:33,237 [salt.state       :1941][INFO    ][10494] Completed state [haproxy] at time 09:04:33.237542 duration_in_ms=60.239
2018-09-30 09:04:33,237 [salt.state       :1770][INFO    ][10494] Running state [haproxy] at time 09:04:33.237856
2018-09-30 09:04:33,238 [salt.state       :1803][INFO    ][10494] Executing state service.mod_watch for [haproxy]
2018-09-30 09:04:33,239 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-09-30 09:04:33,255 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10494] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-09-30 09:04:33,284 [salt.state       :290 ][INFO    ][10494] {'haproxy': True}
2018-09-30 09:04:33,284 [salt.state       :1941][INFO    ][10494] Completed state [haproxy] at time 09:04:33.284811 duration_in_ms=46.954
2018-09-30 09:04:33,293 [salt.minion      :1708][INFO    ][10494] Returning information for job: 20180930090409283633
2018-09-30 09:04:34,889 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command service.status with jid 20180930090434880597
2018-09-30 09:04:34,930 [salt.minion      :1431][INFO    ][11681] Starting a new job with PID 11681
2018-09-30 09:04:35,434 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11681] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-09-30 09:04:35,466 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11681] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-09-30 09:04:35,492 [salt.minion      :1708][INFO    ][11681] Returning information for job: 20180930090434880597
2018-09-30 09:04:36,405 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command service.restart with jid 20180930090436395274
2018-09-30 09:04:36,435 [salt.minion      :1431][INFO    ][11689] Starting a new job with PID 11689
2018-09-30 09:04:37,051 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11689] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-09-30 09:04:37,091 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11689] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-09-30 09:04:37,130 [salt.minion      :1708][INFO    ][11689] Returning information for job: 20180930090436395274
2018-09-30 09:27:22,008 [salt.utils.schedule:1375][INFO    ][3178] Running scheduled job: __mine_interval
2018-09-30 09:46:24,380 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command state.sls with jid 20180930094624367958
2018-09-30 09:46:24,405 [salt.minion      :1431][INFO    ][11862] Starting a new job with PID 11862
2018-09-30 09:46:25,229 [salt.state       :905 ][INFO    ][11862] Loading fresh modules for state activity
2018-09-30 09:46:25,295 [salt.fileclient  :1215][INFO    ][11862] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-09-30 09:46:25,336 [salt.fileclient  :1215][INFO    ][11862] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-09-30 09:46:25,366 [salt.fileclient  :1215][INFO    ][11862] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-09-30 09:46:25,410 [salt.fileclient  :1215][INFO    ][11862] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-09-30 09:46:26,106 [salt.state       :1770][INFO    ][11862] Running state [redis-server] at time 09:46:26.106643
2018-09-30 09:46:26,107 [salt.state       :1803][INFO    ][11862] Executing state pkg.installed for [redis-server]
2018-09-30 09:46:26,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:46:26,577 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-09-30 09:46:26,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-30 09:46:28,896 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:46:28,922 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-09-30 09:46:29,437 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094629421110
2018-09-30 09:46:29,462 [salt.minion      :1431][INFO    ][12239] Starting a new job with PID 12239
2018-09-30 09:46:29,495 [salt.minion      :1708][INFO    ][12239] Returning information for job: 20180930094629421110
2018-09-30 09:46:36,943 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:46:36,989 [salt.state       :290 ][INFO    ][11862] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-09-30 09:46:37,021 [salt.state       :905 ][INFO    ][11862] Loading fresh modules for state activity
2018-09-30 09:46:37,070 [salt.state       :1941][INFO    ][11862] Completed state [redis-server] at time 09:46:37.070330 duration_in_ms=10963.688
2018-09-30 09:46:37,076 [salt.state       :1770][INFO    ][11862] Running state [vm.overcommit_memory] at time 09:46:37.076239
2018-09-30 09:46:37,077 [salt.state       :1803][INFO    ][11862] Executing state sysctl.present for [vm.overcommit_memory]
2018-09-30 09:46:37,082 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-09-30 09:46:37,102 [salt.state       :290 ][INFO    ][11862] {'vm.overcommit_memory': 1}
2018-09-30 09:46:37,103 [salt.state       :1941][INFO    ][11862] Completed state [vm.overcommit_memory] at time 09:46:37.103273 duration_in_ms=27.034
2018-09-30 09:46:37,108 [salt.state       :1770][INFO    ][11862] Running state [/etc/redis/redis.conf] at time 09:46:37.108798
2018-09-30 09:46:37,109 [salt.state       :1803][INFO    ][11862] Executing state file.managed for [/etc/redis/redis.conf]
2018-09-30 09:46:37,152 [salt.fileclient  :1215][INFO    ][11862] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-09-30 09:46:37,215 [salt.state       :290 ][INFO    ][11862] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.32
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -505,8 +505,7 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
-appendonly no
+appendonly yes
 
 # The name of the append only file (default: "appendonly.aof")
 
@@ -535,9 +534,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-09-30 09:46:37,221 [salt.state       :1941][INFO    ][11862] Completed state [/etc/redis/redis.conf] at time 09:46:37.221691 duration_in_ms=112.894
2018-09-30 09:46:37,567 [salt.state       :1770][INFO    ][11862] Running state [redis-server] at time 09:46:37.567465
2018-09-30 09:46:37,568 [salt.state       :1803][INFO    ][11862] Executing state service.running for [redis-server]
2018-09-30 09:46:37,568 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-09-30 09:46:37,591 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-09-30 09:46:37,621 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-09-30 09:46:37,649 [salt.state       :290 ][INFO    ][11862] The service redis-server is already running
2018-09-30 09:46:37,650 [salt.state       :1941][INFO    ][11862] Completed state [redis-server] at time 09:46:37.650102 duration_in_ms=82.636
2018-09-30 09:46:37,650 [salt.state       :1770][INFO    ][11862] Running state [redis-server] at time 09:46:37.650786
2018-09-30 09:46:37,651 [salt.state       :1803][INFO    ][11862] Executing state service.mod_watch for [redis-server]
2018-09-30 09:46:37,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-09-30 09:46:37,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-09-30 09:46:38,003 [salt.state       :290 ][INFO    ][11862] {'redis-server': True}
2018-09-30 09:46:38,004 [salt.state       :1941][INFO    ][11862] Completed state [redis-server] at time 09:46:38.004462 duration_in_ms=353.676
2018-09-30 09:46:38,008 [salt.state       :1770][INFO    ][11862] Running state [redis-sentinel] at time 09:46:38.008196
2018-09-30 09:46:38,008 [salt.state       :1803][INFO    ][11862] Executing state pkg.installed for [redis-sentinel]
2018-09-30 09:46:38,251 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:46:38,294 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-09-30 09:46:39,654 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094639639915
2018-09-30 09:46:39,678 [salt.minion      :1431][INFO    ][12851] Starting a new job with PID 12851
2018-09-30 09:46:39,708 [salt.minion      :1708][INFO    ][12851] Returning information for job: 20180930094639639915
2018-09-30 09:46:43,473 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:46:43,530 [salt.state       :290 ][INFO    ][11862] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-09-30 09:46:43,553 [salt.state       :905 ][INFO    ][11862] Loading fresh modules for state activity
2018-09-30 09:46:43,587 [salt.state       :1941][INFO    ][11862] Completed state [redis-sentinel] at time 09:46:43.587574 duration_in_ms=5579.378
2018-09-30 09:46:43,960 [salt.state       :1770][INFO    ][11862] Running state [/etc/redis/sentinel.conf] at time 09:46:43.960012
2018-09-30 09:46:43,960 [salt.state       :1803][INFO    ][11862] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-09-30 09:46:43,985 [salt.fileclient  :1215][INFO    ][11862] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-09-30 09:46:44,012 [salt.state       :290 ][INFO    ][11862] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.32
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 10.167.4.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-09-30 09:46:44,018 [salt.state       :1941][INFO    ][11862] Completed state [/etc/redis/sentinel.conf] at time 09:46:44.018488 duration_in_ms=58.476
2018-09-30 09:46:44,018 [salt.state       :1770][INFO    ][11862] Running state [redis-sentinel] at time 09:46:44.018793
2018-09-30 09:46:44,019 [salt.state       :1803][INFO    ][11862] Executing state service.running for [redis-sentinel]
2018-09-30 09:46:44,019 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-09-30 09:46:44,035 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-09-30 09:46:44,047 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-09-30 09:46:44,059 [salt.state       :290 ][INFO    ][11862] The service redis-sentinel is already running
2018-09-30 09:46:44,059 [salt.state       :1941][INFO    ][11862] Completed state [redis-sentinel] at time 09:46:44.059724 duration_in_ms=40.93
2018-09-30 09:46:44,060 [salt.state       :1770][INFO    ][11862] Running state [redis-sentinel] at time 09:46:44.060147
2018-09-30 09:46:44,060 [salt.state       :1803][INFO    ][11862] Executing state service.mod_watch for [redis-sentinel]
2018-09-30 09:46:44,061 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-09-30 09:46:44,073 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11862] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-09-30 09:46:44,273 [salt.state       :290 ][INFO    ][11862] {'redis-sentinel': True}
2018-09-30 09:46:44,273 [salt.state       :1941][INFO    ][11862] Completed state [redis-sentinel] at time 09:46:44.273550 duration_in_ms=213.401
2018-09-30 09:46:44,275 [salt.minion      :1708][INFO    ][11862] Returning information for job: 20180930094624367958
2018-09-30 09:46:45,004 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command state.sls with jid 20180930094644990621
2018-09-30 09:46:45,028 [salt.minion      :1431][INFO    ][13176] Starting a new job with PID 13176
2018-09-30 09:46:49,026 [salt.state       :905 ][INFO    ][13176] Loading fresh modules for state activity
2018-09-30 09:46:50,052 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094650038291
2018-09-30 09:46:50,081 [salt.minion      :1431][INFO    ][13189] Starting a new job with PID 13189
2018-09-30 09:46:50,114 [salt.minion      :1708][INFO    ][13189] Returning information for job: 20180930094650038291
2018-09-30 09:46:50,592 [salt.state       :1770][INFO    ][13176] Running state [redis-server] at time 09:46:50.592226
2018-09-30 09:46:50,592 [salt.state       :1803][INFO    ][13176] Executing state pkg.installed for [redis-server]
2018-09-30 09:46:50,593 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13176] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:46:51,043 [salt.state       :290 ][INFO    ][13176] All specified packages are already installed
2018-09-30 09:46:51,043 [salt.state       :1941][INFO    ][13176] Completed state [redis-server] at time 09:46:51.043772 duration_in_ms=451.546
2018-09-30 09:46:51,045 [salt.state       :1770][INFO    ][13176] Running state [vm.overcommit_memory] at time 09:46:51.045015
2018-09-30 09:46:51,045 [salt.state       :1803][INFO    ][13176] Executing state sysctl.present for [vm.overcommit_memory]
2018-09-30 09:46:51,069 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13176] Executing command 'sysctl -n vm.overcommit_memory' in directory '/root'
2018-09-30 09:46:51,090 [salt.state       :290 ][INFO    ][13176] Sysctl value vm.overcommit_memory = 1 is already set
2018-09-30 09:46:51,090 [salt.state       :1941][INFO    ][13176] Completed state [vm.overcommit_memory] at time 09:46:51.090531 duration_in_ms=45.516
2018-09-30 09:46:51,095 [salt.state       :1770][INFO    ][13176] Running state [/etc/redis/redis.conf] at time 09:46:51.095246
2018-09-30 09:46:51,095 [salt.state       :1803][INFO    ][13176] Executing state file.managed for [/etc/redis/redis.conf]
2018-09-30 09:46:51,189 [salt.state       :290 ][INFO    ][13176] File /etc/redis/redis.conf is in the correct state
2018-09-30 09:46:51,189 [salt.state       :1941][INFO    ][13176] Completed state [/etc/redis/redis.conf] at time 09:46:51.189590 duration_in_ms=94.344
2018-09-30 09:46:51,191 [salt.state       :1770][INFO    ][13176] Running state [redis-server] at time 09:46:51.191061
2018-09-30 09:46:51,191 [salt.state       :1803][INFO    ][13176] Executing state service.running for [redis-server]
2018-09-30 09:46:51,192 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13176] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-09-30 09:46:51,225 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13176] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-09-30 09:46:51,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13176] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-09-30 09:46:51,267 [salt.state       :290 ][INFO    ][13176] The service redis-server is already running
2018-09-30 09:46:51,268 [salt.state       :1941][INFO    ][13176] Completed state [redis-server] at time 09:46:51.268428 duration_in_ms=77.366
2018-09-30 09:46:51,269 [salt.state       :1770][INFO    ][13176] Running state [redis-sentinel] at time 09:46:51.269726
2018-09-30 09:46:51,270 [salt.state       :1803][INFO    ][13176] Executing state pkg.installed for [redis-sentinel]
2018-09-30 09:46:51,285 [salt.state       :290 ][INFO    ][13176] All specified packages are already installed
2018-09-30 09:46:51,285 [salt.state       :1941][INFO    ][13176] Completed state [redis-sentinel] at time 09:46:51.285874 duration_in_ms=16.148
2018-09-30 09:46:51,288 [salt.state       :1770][INFO    ][13176] Running state [/etc/redis/sentinel.conf] at time 09:46:51.287974
2018-09-30 09:46:51,288 [salt.state       :1803][INFO    ][13176] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-09-30 09:46:51,349 [salt.state       :290 ][INFO    ][13176] File /etc/redis/sentinel.conf is in the correct state
2018-09-30 09:46:51,350 [salt.state       :1941][INFO    ][13176] Completed state [/etc/redis/sentinel.conf] at time 09:46:51.350176 duration_in_ms=62.202
2018-09-30 09:46:51,351 [salt.state       :1770][INFO    ][13176] Running state [redis-sentinel] at time 09:46:51.351169
2018-09-30 09:46:51,351 [salt.state       :1803][INFO    ][13176] Executing state service.running for [redis-sentinel]
2018-09-30 09:46:51,353 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13176] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-09-30 09:46:51,382 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13176] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-09-30 09:46:51,404 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13176] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-09-30 09:46:51,426 [salt.state       :290 ][INFO    ][13176] The service redis-sentinel is already running
2018-09-30 09:46:51,427 [salt.state       :1941][INFO    ][13176] Completed state [redis-sentinel] at time 09:46:51.427032 duration_in_ms=75.863
2018-09-30 09:46:51,429 [salt.minion      :1708][INFO    ][13176] Returning information for job: 20180930094644990621
2018-09-30 09:47:08,688 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command test.ping with jid 20180930094708675328
2018-09-30 09:47:08,711 [salt.minion      :1431][INFO    ][13217] Starting a new job with PID 13217
2018-09-30 09:47:08,744 [salt.minion      :1708][INFO    ][13217] Returning information for job: 20180930094708675328
2018-09-30 09:47:08,899 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command state.sls with jid 20180930094708884639
2018-09-30 09:47:08,926 [salt.minion      :1431][INFO    ][13222] Starting a new job with PID 13222
2018-09-30 09:47:12,949 [salt.state       :905 ][INFO    ][13222] Loading fresh modules for state activity
2018-09-30 09:47:13,019 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-09-30 09:47:13,062 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-09-30 09:47:13,156 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-09-30 09:47:13,189 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-09-30 09:47:13,221 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-09-30 09:47:13,307 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-09-30 09:47:13,373 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-09-30 09:47:13,445 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-09-30 09:47:13,617 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-09-30 09:47:13,681 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-09-30 09:47:13,737 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-09-30 09:47:13,781 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-09-30 09:47:13,966 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094713952829
2018-09-30 09:47:13,983 [salt.minion      :1431][INFO    ][13253] Starting a new job with PID 13253
2018-09-30 09:47:13,998 [salt.minion      :1708][INFO    ][13253] Returning information for job: 20180930094713952829
2018-09-30 09:47:14,457 [salt.state       :1770][INFO    ][13222] Running state [apache2] at time 09:47:14.457212
2018-09-30 09:47:14,458 [salt.state       :1803][INFO    ][13222] Executing state pkg.installed for [apache2]
2018-09-30 09:47:14,458 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:47:14,901 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-09-30 09:47:15,100 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-30 09:47:17,177 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:47:17,205 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-09-30 09:47:24,106 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094724089455
2018-09-30 09:47:24,134 [salt.minion      :1431][INFO    ][14236] Starting a new job with PID 14236
2018-09-30 09:47:24,170 [salt.minion      :1708][INFO    ][14236] Returning information for job: 20180930094724089455
2018-09-30 09:47:34,281 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094734267206
2018-09-30 09:47:34,310 [salt.minion      :1431][INFO    ][14689] Starting a new job with PID 14689
2018-09-30 09:47:34,352 [salt.minion      :1708][INFO    ][14689] Returning information for job: 20180930094734267206
2018-09-30 09:47:35,295 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:47:35,343 [salt.state       :290 ][INFO    ][13222] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-09-30 09:47:35,376 [salt.state       :905 ][INFO    ][13222] Loading fresh modules for state activity
2018-09-30 09:47:35,423 [salt.state       :1941][INFO    ][13222] Completed state [apache2] at time 09:47:35.423657 duration_in_ms=20966.445
2018-09-30 09:47:35,432 [salt.state       :1770][INFO    ][13222] Running state [openssl] at time 09:47:35.432482
2018-09-30 09:47:35,432 [salt.state       :1803][INFO    ][13222] Executing state pkg.installed for [openssl]
2018-09-30 09:47:36,046 [salt.state       :290 ][INFO    ][13222] All specified packages are already installed
2018-09-30 09:47:36,047 [salt.state       :1941][INFO    ][13222] Completed state [openssl] at time 09:47:36.047199 duration_in_ms=614.717
2018-09-30 09:47:36,048 [salt.state       :1770][INFO    ][13222] Running state [a2enmod rewrite] at time 09:47:36.048290
2018-09-30 09:47:36,048 [salt.state       :1803][INFO    ][13222] Executing state cmd.run for [a2enmod rewrite]
2018-09-30 09:47:36,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command 'a2enmod rewrite' in directory '/root'
2018-09-30 09:47:36,108 [salt.state       :290 ][INFO    ][13222] {'pid': 14752, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-09-30 09:47:36,108 [salt.state       :1941][INFO    ][13222] Completed state [a2enmod rewrite] at time 09:47:36.108558 duration_in_ms=60.268
2018-09-30 09:47:36,109 [salt.state       :1770][INFO    ][13222] Running state [libapache2-mod-wsgi] at time 09:47:36.109213
2018-09-30 09:47:36,109 [salt.state       :1803][INFO    ][13222] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-09-30 09:47:36,127 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:47:36,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-09-30 09:47:42,616 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:47:42,657 [salt.state       :290 ][INFO    ][13222] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-09-30 09:47:42,671 [salt.state       :905 ][INFO    ][13222] Loading fresh modules for state activity
2018-09-30 09:47:42,700 [salt.state       :1941][INFO    ][13222] Completed state [libapache2-mod-wsgi] at time 09:47:42.699864 duration_in_ms=6590.649
2018-09-30 09:47:42,705 [salt.state       :1770][INFO    ][13222] Running state [a2enmod wsgi] at time 09:47:42.705648
2018-09-30 09:47:42,706 [salt.state       :1803][INFO    ][13222] Executing state cmd.run for [a2enmod wsgi]
2018-09-30 09:47:42,707 [salt.state       :290 ][INFO    ][13222] /etc/apache2/mods-enabled/wsgi.load exists
2018-09-30 09:47:42,708 [salt.state       :1941][INFO    ][13222] Completed state [a2enmod wsgi] at time 09:47:42.707962 duration_in_ms=2.314
2018-09-30 09:47:42,716 [salt.state       :1770][INFO    ][13222] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 09:47:42.716243
2018-09-30 09:47:42,716 [salt.state       :1803][INFO    ][13222] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-09-30 09:47:42,764 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-09-30 09:47:42,834 [salt.state       :290 ][INFO    ][13222] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-09-30 09:47:42,835 [salt.state       :1941][INFO    ][13222] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 09:47:42.835173 duration_in_ms=118.931
2018-09-30 09:47:42,835 [salt.state       :1770][INFO    ][13222] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 09:47:42.835517
2018-09-30 09:47:42,835 [salt.state       :1803][INFO    ][13222] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-09-30 09:47:42,836 [salt.state       :290 ][INFO    ][13222] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-09-30 09:47:42,836 [salt.state       :1941][INFO    ][13222] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 09:47:42.836620 duration_in_ms=1.103
2018-09-30 09:47:42,837 [salt.state       :1770][INFO    ][13222] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 09:47:42.836946
2018-09-30 09:47:42,837 [salt.state       :1803][INFO    ][13222] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-09-30 09:47:42,837 [salt.state       :290 ][INFO    ][13222] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-09-30 09:47:42,838 [salt.state       :1941][INFO    ][13222] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 09:47:42.837970 duration_in_ms=1.024
2018-09-30 09:47:42,838 [salt.state       :1770][INFO    ][13222] Running state [a2enmod mpm_prefork] at time 09:47:42.838779
2018-09-30 09:47:42,839 [salt.state       :1803][INFO    ][13222] Executing state cmd.run for [a2enmod mpm_prefork]
2018-09-30 09:47:42,842 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-09-30 09:47:42,904 [salt.state       :290 ][INFO    ][13222] {'pid': 15076, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-09-30 09:47:42,905 [salt.state       :1941][INFO    ][13222] Completed state [a2enmod mpm_prefork] at time 09:47:42.905074 duration_in_ms=66.295
2018-09-30 09:47:42,905 [salt.state       :1770][INFO    ][13222] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 09:47:42.905608
2018-09-30 09:47:42,906 [salt.state       :1803][INFO    ][13222] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-09-30 09:47:42,906 [salt.state       :290 ][INFO    ][13222] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-09-30 09:47:42,906 [salt.state       :1941][INFO    ][13222] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 09:47:42.906833 duration_in_ms=1.225
2018-09-30 09:47:42,907 [salt.state       :1770][INFO    ][13222] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 09:47:42.907141
2018-09-30 09:47:42,907 [salt.state       :1803][INFO    ][13222] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-09-30 09:47:42,907 [salt.state       :290 ][INFO    ][13222] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-09-30 09:47:42,908 [salt.state       :1941][INFO    ][13222] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 09:47:42.908070 duration_in_ms=0.929
2018-09-30 09:47:42,910 [salt.state       :1770][INFO    ][13222] Running state [apache_server_service_task] at time 09:47:42.910123
2018-09-30 09:47:42,910 [salt.state       :1803][INFO    ][13222] Executing state test.show_notification for [apache_server_service_task]
2018-09-30 09:47:42,910 [salt.state       :290 ][INFO    ][13222] Running apache.server.service
2018-09-30 09:47:42,911 [salt.state       :1941][INFO    ][13222] Completed state [apache_server_service_task] at time 09:47:42.910989 duration_in_ms=0.866
2018-09-30 09:47:42,911 [salt.state       :1770][INFO    ][13222] Running state [/etc/apache2/ports.conf] at time 09:47:42.911600
2018-09-30 09:47:42,911 [salt.state       :1803][INFO    ][13222] Executing state file.managed for [/etc/apache2/ports.conf]
2018-09-30 09:47:42,930 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-09-30 09:47:42,977 [salt.state       :290 ][INFO    ][13222] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-09-30 09:47:42,977 [salt.state       :1941][INFO    ][13222] Completed state [/etc/apache2/ports.conf] at time 09:47:42.977546 duration_in_ms=65.947
2018-09-30 09:47:42,978 [salt.state       :1770][INFO    ][13222] Running state [/etc/apache2/conf-available/security.conf] at time 09:47:42.978003
2018-09-30 09:47:42,978 [salt.state       :1803][INFO    ][13222] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-09-30 09:47:42,993 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-09-30 09:47:43,034 [salt.state       :290 ][INFO    ][13222] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-09-30 09:47:43,034 [salt.state       :1941][INFO    ][13222] Completed state [/etc/apache2/conf-available/security.conf] at time 09:47:43.034325 duration_in_ms=56.322
2018-09-30 09:47:43,500 [salt.state       :1770][INFO    ][13222] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 09:47:43.500293
2018-09-30 09:47:43,500 [salt.state       :1803][INFO    ][13222] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-09-30 09:47:43,501 [salt.state       :290 ][INFO    ][13222] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-09-30 09:47:43,501 [salt.state       :1941][INFO    ][13222] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 09:47:43.501302 duration_in_ms=1.01
2018-09-30 09:47:43,501 [salt.state       :1770][INFO    ][13222] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 09:47:43.501652
2018-09-30 09:47:43,501 [salt.state       :1803][INFO    ][13222] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-09-30 09:47:43,519 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-09-30 09:47:43,540 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-09-30 09:47:43,581 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-09-30 09:47:43,598 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-09-30 09:47:43,654 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-09-30 09:47:43,669 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-09-30 09:47:43,686 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-09-30 09:47:43,693 [salt.state       :290 ][INFO    ][13222] File changed:
New file
2018-09-30 09:47:43,693 [salt.state       :1941][INFO    ][13222] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 09:47:43.693893 duration_in_ms=192.24
2018-09-30 09:47:43,694 [salt.state       :1770][INFO    ][13222] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 09:47:43.694272
2018-09-30 09:47:43,694 [salt.state       :1803][INFO    ][13222] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-09-30 09:47:43,836 [salt.state       :290 ][INFO    ][13222] File changed:
New file
2018-09-30 09:47:43,836 [salt.state       :1941][INFO    ][13222] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 09:47:43.836740 duration_in_ms=142.468
2018-09-30 09:47:43,838 [salt.state       :1770][INFO    ][13222] Running state [apache2] at time 09:47:43.837989
2018-09-30 09:47:43,838 [salt.state       :1803][INFO    ][13222] Executing state service.running for [apache2]
2018-09-30 09:47:43,838 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-09-30 09:47:43,861 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-30 09:47:43,876 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-30 09:47:43,892 [salt.state       :290 ][INFO    ][13222] The service apache2 is already running
2018-09-30 09:47:43,892 [salt.state       :1941][INFO    ][13222] Completed state [apache2] at time 09:47:43.892418 duration_in_ms=54.429
2018-09-30 09:47:43,892 [salt.state       :1770][INFO    ][13222] Running state [apache2] at time 09:47:43.892672
2018-09-30 09:47:43,893 [salt.state       :1803][INFO    ][13222] Executing state service.mod_watch for [apache2]
2018-09-30 09:47:43,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-30 09:47:43,907 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-09-30 09:47:44,061 [salt.state       :290 ][INFO    ][13222] {'apache2': True}
2018-09-30 09:47:44,061 [salt.state       :1941][INFO    ][13222] Completed state [apache2] at time 09:47:44.061698 duration_in_ms=169.025
2018-09-30 09:47:44,063 [salt.state       :1770][INFO    ][13222] Running state [/etc/apache2/conf-enabled/security.conf] at time 09:47:44.063656
2018-09-30 09:47:44,064 [salt.state       :1803][INFO    ][13222] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-09-30 09:47:44,072 [salt.state       :290 ][INFO    ][13222] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-09-30 09:47:44,073 [salt.state       :1941][INFO    ][13222] Completed state [/etc/apache2/conf-enabled/security.conf] at time 09:47:44.072995 duration_in_ms=9.339
2018-09-30 09:47:44,076 [salt.state       :1770][INFO    ][13222] Running state [gnocchi-common] at time 09:47:44.076711
2018-09-30 09:47:44,077 [salt.state       :1803][INFO    ][13222] Executing state pkg.installed for [gnocchi-common]
2018-09-30 09:47:44,399 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:47:44,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-09-30 09:47:44,462 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094744448705
2018-09-30 09:47:44,504 [salt.minion      :1431][INFO    ][15195] Starting a new job with PID 15195
2018-09-30 09:47:44,529 [salt.minion      :1708][INFO    ][15195] Returning information for job: 20180930094744448705
2018-09-30 09:47:54,656 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094754641390
2018-09-30 09:47:54,687 [salt.minion      :1431][INFO    ][15394] Starting a new job with PID 15394
2018-09-30 09:47:54,717 [salt.minion      :1708][INFO    ][15394] Returning information for job: 20180930094754641390
2018-09-30 09:48:04,829 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094804816274
2018-09-30 09:48:04,856 [salt.minion      :1431][INFO    ][15631] Starting a new job with PID 15631
2018-09-30 09:48:04,887 [salt.minion      :1708][INFO    ][15631] Returning information for job: 20180930094804816274
2018-09-30 09:48:14,858 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094814842425
2018-09-30 09:48:14,884 [salt.minion      :1431][INFO    ][15879] Starting a new job with PID 15879
2018-09-30 09:48:14,916 [salt.minion      :1708][INFO    ][15879] Returning information for job: 20180930094814842425
2018-09-30 09:48:25,033 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094825016197
2018-09-30 09:48:25,058 [salt.minion      :1431][INFO    ][16142] Starting a new job with PID 16142
2018-09-30 09:48:25,091 [salt.minion      :1708][INFO    ][16142] Returning information for job: 20180930094825016197
2018-09-30 09:48:35,203 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094835189016
2018-09-30 09:48:35,235 [salt.minion      :1431][INFO    ][16388] Starting a new job with PID 16388
2018-09-30 09:48:35,271 [salt.minion      :1708][INFO    ][16388] Returning information for job: 20180930094835189016
2018-09-30 09:48:45,390 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094845374464
2018-09-30 09:48:45,417 [salt.minion      :1431][INFO    ][17174] Starting a new job with PID 17174
2018-09-30 09:48:45,452 [salt.minion      :1708][INFO    ][17174] Returning information for job: 20180930094845374464
2018-09-30 09:48:55,576 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094855557843
2018-09-30 09:48:55,606 [salt.minion      :1431][INFO    ][17179] Starting a new job with PID 17179
2018-09-30 09:48:55,647 [salt.minion      :1708][INFO    ][17179] Returning information for job: 20180930094855557843
2018-09-30 09:49:05,770 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094905755172
2018-09-30 09:49:05,799 [salt.minion      :1431][INFO    ][17437] Starting a new job with PID 17437
2018-09-30 09:49:05,833 [salt.minion      :1708][INFO    ][17437] Returning information for job: 20180930094905755172
2018-09-30 09:49:15,954 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094915940086
2018-09-30 09:49:15,980 [salt.minion      :1431][INFO    ][17723] Starting a new job with PID 17723
2018-09-30 09:49:16,015 [salt.minion      :1708][INFO    ][17723] Returning information for job: 20180930094915940086
2018-09-30 09:49:26,140 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094926124969
2018-09-30 09:49:26,175 [salt.minion      :1431][INFO    ][18007] Starting a new job with PID 18007
2018-09-30 09:49:26,204 [salt.minion      :1708][INFO    ][18007] Returning information for job: 20180930094926124969
2018-09-30 09:49:36,330 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094936314865
2018-09-30 09:49:36,355 [salt.minion      :1431][INFO    ][18263] Starting a new job with PID 18263
2018-09-30 09:49:36,393 [salt.minion      :1708][INFO    ][18263] Returning information for job: 20180930094936314865
2018-09-30 09:49:37,925 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:49:38,005 [salt.state       :290 ][INFO    ][13222] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp4'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.1-1.0~u16.04+mcp16'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp5'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp6'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-09-30 09:49:38,044 [salt.state       :905 ][INFO    ][13222] Loading fresh modules for state activity
2018-09-30 09:49:38,095 [salt.state       :1941][INFO    ][13222] Completed state [gnocchi-common] at time 09:49:38.094964 duration_in_ms=114018.252
2018-09-30 09:49:38,099 [salt.state       :1770][INFO    ][13222] Running state [gnocchi_ssl_mysql] at time 09:49:38.098986
2018-09-30 09:49:38,099 [salt.state       :1803][INFO    ][13222] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-09-30 09:49:38,100 [salt.state       :290 ][INFO    ][13222] Running gnocchi._ssl.mysql
2018-09-30 09:49:38,100 [salt.state       :1941][INFO    ][13222] Completed state [gnocchi_ssl_mysql] at time 09:49:38.100240 duration_in_ms=1.255
2018-09-30 09:49:38,103 [salt.state       :1770][INFO    ][13222] Running state [/etc/gnocchi/gnocchi.conf] at time 09:49:38.103240
2018-09-30 09:49:38,103 [salt.state       :1803][INFO    ][13222] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-09-30 09:49:38,133 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-09-30 09:49:38,255 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-09-30 09:49:38,272 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-09-30 09:49:38,301 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-09-30 09:49:38,348 [salt.fileclient  :1215][INFO    ][13222] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-09-30 09:49:38,358 [salt.state       :290 ][INFO    ][13222] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@10.167.4.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -515,153 +316,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +480,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://10.167.4.32:6379

2018-09-30 09:49:38,359 [salt.state       :1941][INFO    ][13222] Completed state [/etc/gnocchi/gnocchi.conf] at time 09:49:38.359592 duration_in_ms=256.35
2018-09-30 09:49:38,364 [salt.state       :1770][INFO    ][13222] Running state [gnocchi-api] at time 09:49:38.364634
2018-09-30 09:49:38,365 [salt.state       :1803][INFO    ][13222] Executing state pkg.installed for [gnocchi-api]
2018-09-30 09:49:39,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:49:39,677 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-09-30 09:49:46,520 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094946505729
2018-09-30 09:49:46,545 [salt.minion      :1431][INFO    ][18525] Starting a new job with PID 18525
2018-09-30 09:49:46,577 [salt.minion      :1708][INFO    ][18525] Returning information for job: 20180930094946505729
2018-09-30 09:49:56,706 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930094956690976
2018-09-30 09:49:56,727 [salt.minion      :1431][INFO    ][19156] Starting a new job with PID 19156
2018-09-30 09:49:56,754 [salt.minion      :1708][INFO    ][19156] Returning information for job: 20180930094956690976
2018-09-30 09:50:00,103 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:50:00,165 [salt.state       :290 ][INFO    ][13222] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp10'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-09-30 09:50:00,200 [salt.state       :905 ][INFO    ][13222] Loading fresh modules for state activity
2018-09-30 09:50:00,241 [salt.state       :1941][INFO    ][13222] Completed state [gnocchi-api] at time 09:50:00.241510 duration_in_ms=21876.875
2018-09-30 09:50:00,248 [salt.state       :1770][INFO    ][13222] Running state [gnocchi-metricd] at time 09:50:00.248363
2018-09-30 09:50:00,248 [salt.state       :1803][INFO    ][13222] Executing state pkg.installed for [gnocchi-metricd]
2018-09-30 09:50:01,157 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:50:01,206 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-09-30 09:50:05,943 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:50:06,018 [salt.state       :290 ][INFO    ][13222] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-09-30 09:50:06,056 [salt.state       :905 ][INFO    ][13222] Loading fresh modules for state activity
2018-09-30 09:50:06,227 [salt.state       :1941][INFO    ][13222] Completed state [gnocchi-metricd] at time 09:50:06.227270 duration_in_ms=5978.907
2018-09-30 09:50:06,231 [salt.state       :1770][INFO    ][13222] Running state [python-memcache] at time 09:50:06.231565
2018-09-30 09:50:06,231 [salt.state       :1803][INFO    ][13222] Executing state pkg.installed for [python-memcache]
2018-09-30 09:50:06,791 [salt.state       :290 ][INFO    ][13222] All specified packages are already installed
2018-09-30 09:50:06,792 [salt.state       :1941][INFO    ][13222] Completed state [python-memcache] at time 09:50:06.792414 duration_in_ms=560.848
2018-09-30 09:50:06,795 [salt.state       :1770][INFO    ][13222] Running state [gnocchi-upgrade] at time 09:50:06.795034
2018-09-30 09:50:06,795 [salt.state       :1803][INFO    ][13222] Executing state cmd.run for [gnocchi-upgrade]
2018-09-30 09:50:06,796 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-09-30 09:50:06,887 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095006872649
2018-09-30 09:50:06,914 [salt.minion      :1431][INFO    ][19512] Starting a new job with PID 19512
2018-09-30 09:50:06,944 [salt.minion      :1708][INFO    ][19512] Returning information for job: 20180930095006872649
2018-09-30 09:50:10,329 [salt.state       :290 ][INFO    ][13222] {'pid': 19522, 'retcode': 0, 'stderr': '2018-09-30 09:50:08,312 [19529] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-09-30 09:50:08,643 [19529] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@10.167.4.23/gnocchi?charset=utf8\n2018-09-30 09:50:10,166 [19529] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=10.167.4.32,port=6379,db=0>>>\n2018-09-30 09:50:10,169 [19529] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-09-30 09:50:10,331 [salt.state       :1941][INFO    ][13222] Completed state [gnocchi-upgrade] at time 09:50:10.331439 duration_in_ms=3536.404
2018-09-30 09:50:10,334 [salt.state       :1770][INFO    ][13222] Running state [wsgi_gnocchi] at time 09:50:10.334086
2018-09-30 09:50:10,334 [salt.state       :1803][INFO    ][13222] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-09-30 09:50:10,335 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-09-30 09:50:10,423 [salt.state       :290 ][INFO    ][13222] {'new': 'wsgi_gnocchi', 'old': None}
2018-09-30 09:50:10,424 [salt.state       :1941][INFO    ][13222] Completed state [wsgi_gnocchi] at time 09:50:10.424476 duration_in_ms=90.388
2018-09-30 09:50:10,430 [salt.state       :1770][INFO    ][13222] Running state [apache2] at time 09:50:10.430417
2018-09-30 09:50:10,431 [salt.state       :1803][INFO    ][13222] Executing state service.running for [apache2]
2018-09-30 09:50:10,434 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-30 09:50:10,462 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-30 09:50:10,496 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-09-30 09:50:11,775 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-30 09:50:11,816 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-30 09:50:11,836 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-30 09:50:11,850 [salt.state       :290 ][INFO    ][13222] {'apache2': True}
2018-09-30 09:50:11,850 [salt.state       :1941][INFO    ][13222] Completed state [apache2] at time 09:50:11.850729 duration_in_ms=1420.314
2018-09-30 09:50:11,851 [salt.state       :1770][INFO    ][13222] Running state [gnocchi-metricd] at time 09:50:11.851663
2018-09-30 09:50:11,851 [salt.state       :1803][INFO    ][13222] Executing state service.running for [gnocchi-metricd]
2018-09-30 09:50:11,852 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-09-30 09:50:11,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-09-30 09:50:11,888 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-09-30 09:50:11,912 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-09-30 09:50:11,948 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-09-30 09:50:11,989 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-09-30 09:50:12,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-09-30 09:50:12,039 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-09-30 09:50:12,584 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13222] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-09-30 09:50:12,611 [salt.state       :290 ][INFO    ][13222] {'gnocchi-metricd': True}
2018-09-30 09:50:12,612 [salt.state       :1941][INFO    ][13222] Completed state [gnocchi-metricd] at time 09:50:12.612343 duration_in_ms=760.679
2018-09-30 09:50:12,623 [salt.minion      :1708][INFO    ][13222] Returning information for job: 20180930094708884639
2018-09-30 09:56:19,454 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command test.ping with jid 20180930095619441283
2018-09-30 09:56:19,481 [salt.minion      :1431][INFO    ][19828] Starting a new job with PID 19828
2018-09-30 09:56:19,516 [salt.minion      :1708][INFO    ][19828] Returning information for job: 20180930095619441283
2018-09-30 09:56:19,664 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command state.sls with jid 20180930095619650618
2018-09-30 09:56:19,691 [salt.minion      :1431][INFO    ][19833] Starting a new job with PID 19833
2018-09-30 09:56:23,531 [salt.state       :905 ][INFO    ][19833] Loading fresh modules for state activity
2018-09-30 09:56:23,606 [salt.fileclient  :1215][INFO    ][19833] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-09-30 09:56:23,644 [salt.fileclient  :1215][INFO    ][19833] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-09-30 09:56:24,160 [salt.fileclient  :1215][INFO    ][19833] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-09-30 09:56:24,798 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095624776842
2018-09-30 09:56:24,830 [salt.minion      :1431][INFO    ][19863] Starting a new job with PID 19863
2018-09-30 09:56:24,862 [salt.minion      :1708][INFO    ][19863] Returning information for job: 20180930095624776842
2018-09-30 09:56:25,804 [salt.state       :1770][INFO    ][19833] Running state [apache2] at time 09:56:25.804737
2018-09-30 09:56:25,805 [salt.state       :1803][INFO    ][19833] Executing state pkg.installed for [apache2]
2018-09-30 09:56:25,806 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:56:26,372 [salt.state       :290 ][INFO    ][19833] All specified packages are already installed
2018-09-30 09:56:26,373 [salt.state       :1941][INFO    ][19833] Completed state [apache2] at time 09:56:26.373743 duration_in_ms=569.006
2018-09-30 09:56:26,374 [salt.state       :1770][INFO    ][19833] Running state [openssl] at time 09:56:26.374467
2018-09-30 09:56:26,375 [salt.state       :1803][INFO    ][19833] Executing state pkg.installed for [openssl]
2018-09-30 09:56:26,382 [salt.state       :290 ][INFO    ][19833] All specified packages are already installed
2018-09-30 09:56:26,383 [salt.state       :1941][INFO    ][19833] Completed state [openssl] at time 09:56:26.383015 duration_in_ms=8.548
2018-09-30 09:56:26,384 [salt.state       :1770][INFO    ][19833] Running state [a2enmod rewrite] at time 09:56:26.383952
2018-09-30 09:56:26,384 [salt.state       :1803][INFO    ][19833] Executing state cmd.run for [a2enmod rewrite]
2018-09-30 09:56:26,385 [salt.state       :290 ][INFO    ][19833] /etc/apache2/mods-enabled/rewrite.load exists
2018-09-30 09:56:26,385 [salt.state       :1941][INFO    ][19833] Completed state [a2enmod rewrite] at time 09:56:26.385716 duration_in_ms=1.764
2018-09-30 09:56:26,386 [salt.state       :1770][INFO    ][19833] Running state [libapache2-mod-wsgi] at time 09:56:26.386416
2018-09-30 09:56:26,387 [salt.state       :1803][INFO    ][19833] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-09-30 09:56:26,393 [salt.state       :290 ][INFO    ][19833] All specified packages are already installed
2018-09-30 09:56:26,394 [salt.state       :1941][INFO    ][19833] Completed state [libapache2-mod-wsgi] at time 09:56:26.394359 duration_in_ms=7.943
2018-09-30 09:56:26,395 [salt.state       :1770][INFO    ][19833] Running state [a2enmod wsgi] at time 09:56:26.395047
2018-09-30 09:56:26,395 [salt.state       :1803][INFO    ][19833] Executing state cmd.run for [a2enmod wsgi]
2018-09-30 09:56:26,396 [salt.state       :290 ][INFO    ][19833] /etc/apache2/mods-enabled/wsgi.load exists
2018-09-30 09:56:26,396 [salt.state       :1941][INFO    ][19833] Completed state [a2enmod wsgi] at time 09:56:26.396656 duration_in_ms=1.609
2018-09-30 09:56:26,402 [salt.state       :1770][INFO    ][19833] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 09:56:26.402386
2018-09-30 09:56:26,402 [salt.state       :1803][INFO    ][19833] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-09-30 09:56:26,569 [salt.state       :290 ][INFO    ][19833] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-09-30 09:56:26,570 [salt.state       :1941][INFO    ][19833] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 09:56:26.570376 duration_in_ms=167.991
2018-09-30 09:56:26,570 [salt.state       :1770][INFO    ][19833] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 09:56:26.570792
2018-09-30 09:56:26,571 [salt.state       :1803][INFO    ][19833] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-09-30 09:56:26,571 [salt.state       :290 ][INFO    ][19833] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-09-30 09:56:26,572 [salt.state       :1941][INFO    ][19833] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 09:56:26.572122 duration_in_ms=1.33
2018-09-30 09:56:26,572 [salt.state       :1770][INFO    ][19833] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 09:56:26.572522
2018-09-30 09:56:26,572 [salt.state       :1803][INFO    ][19833] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-09-30 09:56:26,573 [salt.state       :290 ][INFO    ][19833] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-09-30 09:56:26,573 [salt.state       :1941][INFO    ][19833] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 09:56:26.573798 duration_in_ms=1.275
2018-09-30 09:56:26,574 [salt.state       :1770][INFO    ][19833] Running state [a2enmod mpm_prefork] at time 09:56:26.574469
2018-09-30 09:56:26,574 [salt.state       :1803][INFO    ][19833] Executing state cmd.run for [a2enmod mpm_prefork]
2018-09-30 09:56:26,575 [salt.state       :290 ][INFO    ][19833] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-09-30 09:56:26,575 [salt.state       :1941][INFO    ][19833] Completed state [a2enmod mpm_prefork] at time 09:56:26.575771 duration_in_ms=1.302
2018-09-30 09:56:26,576 [salt.state       :1770][INFO    ][19833] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 09:56:26.576172
2018-09-30 09:56:26,576 [salt.state       :1803][INFO    ][19833] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-09-30 09:56:26,577 [salt.state       :290 ][INFO    ][19833] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-09-30 09:56:26,577 [salt.state       :1941][INFO    ][19833] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 09:56:26.577406 duration_in_ms=1.235
2018-09-30 09:56:26,577 [salt.state       :1770][INFO    ][19833] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 09:56:26.577809
2018-09-30 09:56:26,578 [salt.state       :1803][INFO    ][19833] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-09-30 09:56:26,578 [salt.state       :290 ][INFO    ][19833] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-09-30 09:56:26,579 [salt.state       :1941][INFO    ][19833] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 09:56:26.579049 duration_in_ms=1.24
2018-09-30 09:56:26,579 [salt.state       :1770][INFO    ][19833] Running state [apache_server_service_task] at time 09:56:26.579933
2018-09-30 09:56:26,580 [salt.state       :1803][INFO    ][19833] Executing state test.show_notification for [apache_server_service_task]
2018-09-30 09:56:26,580 [salt.state       :290 ][INFO    ][19833] Running apache.server.service
2018-09-30 09:56:26,581 [salt.state       :1941][INFO    ][19833] Completed state [apache_server_service_task] at time 09:56:26.581143 duration_in_ms=1.21
2018-09-30 09:56:26,581 [salt.state       :1770][INFO    ][19833] Running state [/etc/apache2/ports.conf] at time 09:56:26.581656
2018-09-30 09:56:26,582 [salt.state       :1803][INFO    ][19833] Executing state file.managed for [/etc/apache2/ports.conf]
2018-09-30 09:56:26,623 [salt.state       :290 ][INFO    ][19833] File /etc/apache2/ports.conf is in the correct state
2018-09-30 09:56:26,623 [salt.state       :1941][INFO    ][19833] Completed state [/etc/apache2/ports.conf] at time 09:56:26.623833 duration_in_ms=42.177
2018-09-30 09:56:26,624 [salt.state       :1770][INFO    ][19833] Running state [/etc/apache2/conf-available/security.conf] at time 09:56:26.624361
2018-09-30 09:56:26,624 [salt.state       :1803][INFO    ][19833] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-09-30 09:56:26,667 [salt.state       :290 ][INFO    ][19833] File /etc/apache2/conf-available/security.conf is in the correct state
2018-09-30 09:56:26,668 [salt.state       :1941][INFO    ][19833] Completed state [/etc/apache2/conf-available/security.conf] at time 09:56:26.668218 duration_in_ms=43.857
2018-09-30 09:56:26,672 [salt.state       :1770][INFO    ][19833] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 09:56:26.672543
2018-09-30 09:56:26,672 [salt.state       :1803][INFO    ][19833] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-09-30 09:56:26,673 [salt.state       :290 ][INFO    ][19833] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-09-30 09:56:26,673 [salt.state       :1941][INFO    ][19833] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 09:56:26.673799 duration_in_ms=1.257
2018-09-30 09:56:26,674 [salt.state       :1770][INFO    ][19833] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 09:56:26.674370
2018-09-30 09:56:26,674 [salt.state       :1803][INFO    ][19833] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-09-30 09:56:26,901 [salt.state       :290 ][INFO    ][19833] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-09-30 09:56:26,902 [salt.state       :1941][INFO    ][19833] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 09:56:26.902779 duration_in_ms=228.408
2018-09-30 09:56:26,903 [salt.state       :1770][INFO    ][19833] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 09:56:26.903844
2018-09-30 09:56:26,904 [salt.state       :1803][INFO    ][19833] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-09-30 09:56:27,156 [salt.state       :290 ][INFO    ][19833] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-09-30 09:56:27,157 [salt.state       :1941][INFO    ][19833] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 09:56:27.157213 duration_in_ms=253.369
2018-09-30 09:56:27,159 [salt.state       :1770][INFO    ][19833] Running state [apache2] at time 09:56:27.159372
2018-09-30 09:56:27,159 [salt.state       :1803][INFO    ][19833] Executing state service.running for [apache2]
2018-09-30 09:56:27,160 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-09-30 09:56:27,216 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-30 09:56:27,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-30 09:56:27,279 [salt.state       :290 ][INFO    ][19833] The service apache2 is already running
2018-09-30 09:56:27,280 [salt.state       :1941][INFO    ][19833] Completed state [apache2] at time 09:56:27.280549 duration_in_ms=121.177
2018-09-30 09:56:27,283 [salt.state       :1770][INFO    ][19833] Running state [/etc/apache2/conf-enabled/security.conf] at time 09:56:27.283013
2018-09-30 09:56:27,284 [salt.state       :1803][INFO    ][19833] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-09-30 09:56:27,289 [salt.state       :290 ][INFO    ][19833] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-09-30 09:56:27,290 [salt.state       :1941][INFO    ][19833] Completed state [/etc/apache2/conf-enabled/security.conf] at time 09:56:27.290313 duration_in_ms=7.3
2018-09-30 09:56:27,292 [salt.state       :1770][INFO    ][19833] Running state [panko-api] at time 09:56:27.292493
2018-09-30 09:56:27,293 [salt.state       :1803][INFO    ][19833] Executing state pkg.installed for [panko-api]
2018-09-30 09:56:27,331 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-09-30 09:56:27,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-30 09:56:29,708 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:56:29,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-09-30 09:56:34,972 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095634956169
2018-09-30 09:56:34,990 [salt.minion      :1431][INFO    ][20362] Starting a new job with PID 20362
2018-09-30 09:56:35,013 [salt.minion      :1708][INFO    ][20362] Returning information for job: 20180930095634956169
2018-09-30 09:56:37,007 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:56:37,075 [salt.state       :290 ][INFO    ][19833] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-09-30 09:56:37,114 [salt.state       :905 ][INFO    ][19833] Loading fresh modules for state activity
2018-09-30 09:56:37,151 [salt.state       :1941][INFO    ][19833] Completed state [panko-api] at time 09:56:37.151315 duration_in_ms=9858.822
2018-09-30 09:56:37,154 [salt.state       :1770][INFO    ][19833] Running state [panko_ssl_mysql] at time 09:56:37.154395
2018-09-30 09:56:37,155 [salt.state       :1803][INFO    ][19833] Executing state test.show_notification for [panko_ssl_mysql]
2018-09-30 09:56:37,155 [salt.state       :290 ][INFO    ][19833] Running panko._ssl.mysql
2018-09-30 09:56:37,156 [salt.state       :1941][INFO    ][19833] Completed state [panko_ssl_mysql] at time 09:56:37.156034 duration_in_ms=1.639
2018-09-30 09:56:37,158 [salt.state       :1770][INFO    ][19833] Running state [/etc/panko/panko.conf] at time 09:56:37.158400
2018-09-30 09:56:37,158 [salt.state       :1803][INFO    ][19833] Executing state file.managed for [/etc/panko/panko.conf]
2018-09-30 09:56:37,184 [salt.fileclient  :1215][INFO    ][19833] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-09-30 09:56:37,233 [salt.fileclient  :1215][INFO    ][19833] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-09-30 09:56:37,252 [salt.fileclient  :1215][INFO    ][19833] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-09-30 09:56:37,318 [salt.state       :290 ][INFO    ][19833] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@10.167.4.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -466,110 +481,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-09-30 09:56:37,325 [salt.state       :1941][INFO    ][19833] Completed state [/etc/panko/panko.conf] at time 09:56:37.325183 duration_in_ms=166.784
2018-09-30 09:56:37,335 [salt.state       :1770][INFO    ][19833] Running state [/usr/bin/panko-expirer --use-syslog] at time 09:56:37.335609
2018-09-30 09:56:37,335 [salt.state       :1803][INFO    ][19833] Executing state cron.present for [/usr/bin/panko-expirer --use-syslog]
2018-09-30 09:56:37,338 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command 'crontab -u panko -l' in directory '/root'
2018-09-30 09:56:37,384 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][19833] Command '['crontab', '-u', 'panko', '-l']' failed with return code: 1
2018-09-30 09:56:37,384 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][19833] stderr: no crontab for panko

2018-09-30 09:56:37,384 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][19833] retcode: 1
2018-09-30 09:56:37,385 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command 'crontab -u panko /tmp/__salt.tmp.e6qgHF' in directory '/root'
2018-09-30 09:56:37,428 [salt.state       :290 ][INFO    ][19833] {'panko': '/usr/bin/panko-expirer --use-syslog'}
2018-09-30 09:56:37,429 [salt.state       :1941][INFO    ][19833] Completed state [/usr/bin/panko-expirer --use-syslog] at time 09:56:37.429339 duration_in_ms=93.729
2018-09-30 09:56:37,434 [salt.state       :1770][INFO    ][19833] Running state [panko-dbsync] at time 09:56:37.434122
2018-09-30 09:56:37,434 [salt.state       :1803][INFO    ][19833] Executing state cmd.run for [panko-dbsync]
2018-09-30 09:56:37,438 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command 'panko-dbsync' in directory '/root'
2018-09-30 09:56:40,344 [salt.state       :290 ][INFO    ][19833] {'pid': 20465, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-09-30 09:56:40,346 [salt.state       :1941][INFO    ][19833] Completed state [panko-dbsync] at time 09:56:40.346016 duration_in_ms=2911.892
2018-09-30 09:56:40,355 [salt.state       :1770][INFO    ][19833] Running state [wsgi_panko] at time 09:56:40.355500
2018-09-30 09:56:40,356 [salt.state       :1803][INFO    ][19833] Executing state apache_site.enabled for [wsgi_panko]
2018-09-30 09:56:40,357 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-09-30 09:56:40,445 [salt.state       :290 ][INFO    ][19833] {'new': 'wsgi_panko', 'old': None}
2018-09-30 09:56:40,446 [salt.state       :1941][INFO    ][19833] Completed state [wsgi_panko] at time 09:56:40.446493 duration_in_ms=90.992
2018-09-30 09:56:40,925 [salt.state       :1770][INFO    ][19833] Running state [apache2] at time 09:56:40.925868
2018-09-30 09:56:40,926 [salt.state       :1803][INFO    ][19833] Executing state service.running for [apache2]
2018-09-30 09:56:40,927 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-30 09:56:40,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-30 09:56:40,983 [salt.state       :290 ][INFO    ][19833] The service apache2 is already running
2018-09-30 09:56:40,984 [salt.state       :1941][INFO    ][19833] Completed state [apache2] at time 09:56:40.984700 duration_in_ms=58.831
2018-09-30 09:56:40,985 [salt.state       :1770][INFO    ][19833] Running state [apache2] at time 09:56:40.985570
2018-09-30 09:56:40,986 [salt.state       :1803][INFO    ][19833] Executing state service.mod_watch for [apache2]
2018-09-30 09:56:40,988 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-30 09:56:41,009 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19833] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-09-30 09:56:43,449 [salt.state       :290 ][INFO    ][19833] {'apache2': True}
2018-09-30 09:56:43,449 [salt.state       :1941][INFO    ][19833] Completed state [apache2] at time 09:56:43.449399 duration_in_ms=2463.83
2018-09-30 09:56:43,452 [salt.minion      :1708][INFO    ][19833] Returning information for job: 20180930095619650618
2018-09-30 09:57:26,662 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command test.ping with jid 20180930095726650275
2018-09-30 09:57:26,692 [salt.minion      :1431][INFO    ][20627] Starting a new job with PID 20627
2018-09-30 09:57:26,728 [salt.minion      :1708][INFO    ][20627] Returning information for job: 20180930095726650275
2018-09-30 09:57:26,863 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command state.sls with jid 20180930095726848579
2018-09-30 09:57:26,887 [salt.minion      :1431][INFO    ][20632] Starting a new job with PID 20632
2018-09-30 09:57:30,754 [salt.state       :905 ][INFO    ][20632] Loading fresh modules for state activity
2018-09-30 09:57:30,816 [salt.fileclient  :1215][INFO    ][20632] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-09-30 09:57:30,846 [salt.fileclient  :1215][INFO    ][20632] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-09-30 09:57:30,976 [salt.fileclient  :1215][INFO    ][20632] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-09-30 09:57:31,039 [salt.fileclient  :1215][INFO    ][20632] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-09-30 09:57:31,903 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095731889072
2018-09-30 09:57:31,920 [salt.minion      :1431][INFO    ][20648] Starting a new job with PID 20648
2018-09-30 09:57:31,936 [salt.minion      :1708][INFO    ][20648] Returning information for job: 20180930095731889072
2018-09-30 09:57:32,660 [salt.state       :1770][INFO    ][20632] Running state [aodh-api] at time 09:57:32.660272
2018-09-30 09:57:32,660 [salt.state       :1803][INFO    ][20632] Executing state pkg.installed for [aodh-api]
2018-09-30 09:57:32,661 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:57:33,175 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-09-30 09:57:33,388 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-30 09:57:35,162 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:57:35,196 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-09-30 09:57:42,042 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095742026659
2018-09-30 09:57:42,071 [salt.minion      :1431][INFO    ][21148] Starting a new job with PID 21148
2018-09-30 09:57:42,143 [salt.minion      :1708][INFO    ][21148] Returning information for job: 20180930095742026659
2018-09-30 09:57:52,251 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095752236821
2018-09-30 09:57:52,269 [salt.minion      :1431][INFO    ][21325] Starting a new job with PID 21325
2018-09-30 09:57:52,289 [salt.minion      :1708][INFO    ][21325] Returning information for job: 20180930095752236821
2018-09-30 09:58:02,399 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095802383031
2018-09-30 09:58:02,423 [salt.minion      :1431][INFO    ][26098] Starting a new job with PID 26098
2018-09-30 09:58:02,456 [salt.minion      :1708][INFO    ][26098] Returning information for job: 20180930095802383031
2018-09-30 09:58:09,371 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:58:09,460 [salt.state       :290 ][INFO    ][20632] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'c++-compiler' changed from 'absent' to '1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-135.161'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev' changed from 'absent' to '1'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'binutils-gold' changed from 'absent' to '1'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-09-30 09:58:09,514 [salt.state       :905 ][INFO    ][20632] Loading fresh modules for state activity
2018-09-30 09:58:09,687 [salt.state       :1941][INFO    ][20632] Completed state [aodh-api] at time 09:58:09.687776 duration_in_ms=37027.504
2018-09-30 09:58:09,699 [salt.state       :1770][INFO    ][20632] Running state [aodh-evaluator] at time 09:58:09.699120
2018-09-30 09:58:09,700 [salt.state       :1803][INFO    ][20632] Executing state pkg.installed for [aodh-evaluator]
2018-09-30 09:58:10,285 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:58:10,335 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-09-30 09:58:12,583 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095812569056
2018-09-30 09:58:12,608 [salt.minion      :1431][INFO    ][26319] Starting a new job with PID 26319
2018-09-30 09:58:12,640 [salt.minion      :1708][INFO    ][26319] Returning information for job: 20180930095812569056
2018-09-30 09:58:15,054 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:58:15,090 [salt.state       :290 ][INFO    ][20632] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-09-30 09:58:15,111 [salt.state       :905 ][INFO    ][20632] Loading fresh modules for state activity
2018-09-30 09:58:15,143 [salt.state       :1941][INFO    ][20632] Completed state [aodh-evaluator] at time 09:58:15.143190 duration_in_ms=5444.071
2018-09-30 09:58:15,150 [salt.state       :1770][INFO    ][20632] Running state [aodh-notifier] at time 09:58:15.150697
2018-09-30 09:58:15,153 [salt.state       :1803][INFO    ][20632] Executing state pkg.installed for [aodh-notifier]
2018-09-30 09:58:16,030 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:58:16,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-09-30 09:58:20,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:58:20,833 [salt.state       :290 ][INFO    ][20632] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-09-30 09:58:20,854 [salt.state       :905 ][INFO    ][20632] Loading fresh modules for state activity
2018-09-30 09:58:20,887 [salt.state       :1941][INFO    ][20632] Completed state [aodh-notifier] at time 09:58:20.887615 duration_in_ms=5736.916
2018-09-30 09:58:20,898 [salt.state       :1770][INFO    ][20632] Running state [aodh-listener] at time 09:58:20.898507
2018-09-30 09:58:20,899 [salt.state       :1803][INFO    ][20632] Executing state pkg.installed for [aodh-listener]
2018-09-30 09:58:21,599 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:58:21,662 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-09-30 09:58:22,752 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095822738134
2018-09-30 09:58:22,798 [salt.minion      :1431][INFO    ][26876] Starting a new job with PID 26876
2018-09-30 09:58:22,837 [salt.minion      :1708][INFO    ][26876] Returning information for job: 20180930095822738134
2018-09-30 09:58:26,603 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:58:26,653 [salt.state       :290 ][INFO    ][20632] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-09-30 09:58:26,691 [salt.state       :905 ][INFO    ][20632] Loading fresh modules for state activity
2018-09-30 09:58:26,730 [salt.state       :1941][INFO    ][20632] Completed state [aodh-listener] at time 09:58:26.730266 duration_in_ms=5831.761
2018-09-30 09:58:26,737 [salt.state       :1770][INFO    ][20632] Running state [python-aodhclient] at time 09:58:26.737123
2018-09-30 09:58:26,737 [salt.state       :1803][INFO    ][20632] Executing state pkg.installed for [python-aodhclient]
2018-09-30 09:58:27,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 09:58:27,398 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-09-30 09:58:30,256 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 09:58:30,315 [salt.state       :290 ][INFO    ][20632] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-09-30 09:58:30,339 [salt.state       :905 ][INFO    ][20632] Loading fresh modules for state activity
2018-09-30 09:58:30,365 [salt.state       :1941][INFO    ][20632] Completed state [python-aodhclient] at time 09:58:30.365154 duration_in_ms=3628.03
2018-09-30 09:58:30,367 [salt.state       :1770][INFO    ][20632] Running state [aodh_ssl_mysql] at time 09:58:30.367237
2018-09-30 09:58:30,367 [salt.state       :1803][INFO    ][20632] Executing state test.show_notification for [aodh_ssl_mysql]
2018-09-30 09:58:30,367 [salt.state       :290 ][INFO    ][20632] Running aodh._ssl.mysql
2018-09-30 09:58:30,367 [salt.state       :1941][INFO    ][20632] Completed state [aodh_ssl_mysql] at time 09:58:30.367947 duration_in_ms=0.71
2018-09-30 09:58:30,368 [salt.state       :1770][INFO    ][20632] Running state [aodh_ssl_rabbitmq] at time 09:58:30.368232
2018-09-30 09:58:30,368 [salt.state       :1803][INFO    ][20632] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-09-30 09:58:30,368 [salt.state       :290 ][INFO    ][20632] Running aodh._ssl.rabbitmq
2018-09-30 09:58:30,368 [salt.state       :1941][INFO    ][20632] Completed state [aodh_ssl_rabbitmq] at time 09:58:30.368822 duration_in_ms=0.59
2018-09-30 09:58:30,371 [salt.state       :1770][INFO    ][20632] Running state [/etc/aodh/aodh.conf] at time 09:58:30.371370
2018-09-30 09:58:30,371 [salt.state       :1803][INFO    ][20632] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-09-30 09:58:30,411 [salt.fileclient  :1215][INFO    ][20632] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-09-30 09:58:30,498 [salt.fileclient  :1215][INFO    ][20632] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-09-30 09:58:30,609 [salt.fileclient  :1215][INFO    ][20632] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-09-30 09:58:30,624 [salt.fileclient  :1215][INFO    ][20632] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-09-30 09:58:30,657 [salt.state       :290 ][INFO    ][20632] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 10.167.4.32
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@10.167.4.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,291 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +862,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +878,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +916,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -775,995 +1034,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-09-30 09:58:30,666 [salt.state       :1941][INFO    ][20632] Completed state [/etc/aodh/aodh.conf] at time 09:58:30.666574 duration_in_ms=295.204
2018-09-30 09:58:30,667 [salt.state       :1770][INFO    ][20632] Running state [/etc/default/aodh-evaluator] at time 09:58:30.667055
2018-09-30 09:58:30,667 [salt.state       :1803][INFO    ][20632] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-09-30 09:58:30,694 [salt.fileclient  :1215][INFO    ][20632] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-09-30 09:58:30,720 [salt.state       :290 ][INFO    ][20632] File changed:
New file
2018-09-30 09:58:30,720 [salt.state       :1941][INFO    ][20632] Completed state [/etc/default/aodh-evaluator] at time 09:58:30.720878 duration_in_ms=53.823
2018-09-30 09:58:30,721 [salt.state       :1770][INFO    ][20632] Running state [/etc/default/aodh-notifier] at time 09:58:30.721274
2018-09-30 09:58:30,721 [salt.state       :1803][INFO    ][20632] Executing state file.managed for [/etc/default/aodh-notifier]
2018-09-30 09:58:30,759 [salt.state       :290 ][INFO    ][20632] File changed:
New file
2018-09-30 09:58:30,759 [salt.state       :1941][INFO    ][20632] Completed state [/etc/default/aodh-notifier] at time 09:58:30.759714 duration_in_ms=38.439
2018-09-30 09:58:30,760 [salt.state       :1770][INFO    ][20632] Running state [/etc/default/aodh-listener] at time 09:58:30.760045
2018-09-30 09:58:30,760 [salt.state       :1803][INFO    ][20632] Executing state file.managed for [/etc/default/aodh-listener]
2018-09-30 09:58:30,774 [salt.state       :290 ][INFO    ][20632] File changed:
New file
2018-09-30 09:58:30,774 [salt.state       :1941][INFO    ][20632] Completed state [/etc/default/aodh-listener] at time 09:58:30.774331 duration_in_ms=14.285
2018-09-30 09:58:30,779 [salt.state       :1770][INFO    ][20632] Running state [aodh-dbsync] at time 09:58:30.779482
2018-09-30 09:58:30,779 [salt.state       :1803][INFO    ][20632] Executing state cmd.run for [aodh-dbsync]
2018-09-30 09:58:30,781 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command 'aodh-dbsync' in directory '/root'
2018-09-30 09:58:32,806 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095832792089
2018-09-30 09:58:32,834 [salt.minion      :1431][INFO    ][27275] Starting a new job with PID 27275
2018-09-30 09:58:32,872 [salt.minion      :1708][INFO    ][27275] Returning information for job: 20180930095832792089
2018-09-30 09:58:33,881 [salt.state       :290 ][INFO    ][20632] {'pid': 27263, 'retcode': 0, 'stderr': '', 'stdout': '2018-09-30 09:58:32.673 27264 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-09-30 09:58:32.674 27264 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-09-30 09:58:33,883 [salt.state       :1941][INFO    ][20632] Completed state [aodh-dbsync] at time 09:58:33.882803 duration_in_ms=3103.32
2018-09-30 09:58:33,898 [salt.state       :1770][INFO    ][20632] Running state [/usr/bin/aodh-expirer] at time 09:58:33.897913
2018-09-30 09:58:33,899 [salt.state       :1803][INFO    ][20632] Executing state cron.present for [/usr/bin/aodh-expirer]
2018-09-30 09:58:33,900 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command 'crontab -u aodh -l' in directory '/root'
2018-09-30 09:58:33,929 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][20632] Command '['crontab', '-u', 'aodh', '-l']' failed with return code: 1
2018-09-30 09:58:33,930 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][20632] stderr: no crontab for aodh

2018-09-30 09:58:33,931 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][20632] retcode: 1
2018-09-30 09:58:33,933 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command 'crontab -u aodh /tmp/__salt.tmp.mTa_Cd' in directory '/root'
2018-09-30 09:58:33,988 [salt.state       :290 ][INFO    ][20632] {'aodh': '/usr/bin/aodh-expirer'}
2018-09-30 09:58:33,990 [salt.state       :1941][INFO    ][20632] Completed state [/usr/bin/aodh-expirer] at time 09:58:33.990297 duration_in_ms=92.383
2018-09-30 09:58:33,992 [salt.state       :1770][INFO    ][20632] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 09:58:33.992193
2018-09-30 09:58:33,993 [salt.state       :1803][INFO    ][20632] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-09-30 09:58:34,022 [salt.fileclient  :1215][INFO    ][20632] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-09-30 09:58:34,074 [salt.state       :290 ][INFO    ][20632] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 10.167.4.32:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-09-30 09:58:34,074 [salt.state       :1941][INFO    ][20632] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 09:58:34.074864 duration_in_ms=82.671
2018-09-30 09:58:34,075 [salt.state       :1770][INFO    ][20632] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 09:58:34.075567
2018-09-30 09:58:34,076 [salt.state       :1803][INFO    ][20632] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-09-30 09:58:34,092 [salt.state       :290 ][INFO    ][20632] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-09-30 09:58:34,093 [salt.state       :1941][INFO    ][20632] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 09:58:34.093309 duration_in_ms=17.743
2018-09-30 09:58:34,631 [salt.state       :1770][INFO    ][20632] Running state [apache2] at time 09:58:34.631261
2018-09-30 09:58:34,631 [salt.state       :1803][INFO    ][20632] Executing state service.running for [apache2]
2018-09-30 09:58:34,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-09-30 09:58:34,668 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-30 09:58:34,693 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-30 09:58:34,721 [salt.state       :290 ][INFO    ][20632] The service apache2 is already running
2018-09-30 09:58:34,722 [salt.state       :1941][INFO    ][20632] Completed state [apache2] at time 09:58:34.722146 duration_in_ms=90.884
2018-09-30 09:58:34,723 [salt.state       :1770][INFO    ][20632] Running state [apache2] at time 09:58:34.723078
2018-09-30 09:58:34,724 [salt.state       :1803][INFO    ][20632] Executing state service.mod_watch for [apache2]
2018-09-30 09:58:34,726 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-30 09:58:34,751 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-09-30 09:58:37,177 [salt.state       :290 ][INFO    ][20632] {'apache2': True}
2018-09-30 09:58:37,178 [salt.state       :1941][INFO    ][20632] Completed state [apache2] at time 09:58:37.178558 duration_in_ms=2455.479
2018-09-30 09:58:37,185 [salt.state       :1770][INFO    ][20632] Running state [aodh-evaluator] at time 09:58:37.185779
2018-09-30 09:58:37,191 [salt.state       :1803][INFO    ][20632] Executing state service.running for [aodh-evaluator]
2018-09-30 09:58:37,193 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-09-30 09:58:37,222 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-09-30 09:58:37,244 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-09-30 09:58:37,272 [salt.state       :290 ][INFO    ][20632] The service aodh-evaluator is already running
2018-09-30 09:58:37,273 [salt.state       :1941][INFO    ][20632] Completed state [aodh-evaluator] at time 09:58:37.273215 duration_in_ms=87.437
2018-09-30 09:58:37,273 [salt.state       :1770][INFO    ][20632] Running state [aodh-evaluator] at time 09:58:37.273460
2018-09-30 09:58:37,273 [salt.state       :1803][INFO    ][20632] Executing state service.mod_watch for [aodh-evaluator]
2018-09-30 09:58:37,274 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-09-30 09:58:37,289 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-09-30 09:58:37,491 [salt.state       :290 ][INFO    ][20632] {'aodh-evaluator': True}
2018-09-30 09:58:37,492 [salt.state       :1941][INFO    ][20632] Completed state [aodh-evaluator] at time 09:58:37.492114 duration_in_ms=218.653
2018-09-30 09:58:37,493 [salt.state       :1770][INFO    ][20632] Running state [aodh-notifier] at time 09:58:37.492998
2018-09-30 09:58:37,504 [salt.state       :1803][INFO    ][20632] Executing state service.running for [aodh-notifier]
2018-09-30 09:58:37,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-09-30 09:58:37,543 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-09-30 09:58:37,572 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-09-30 09:58:37,595 [salt.state       :290 ][INFO    ][20632] The service aodh-notifier is already running
2018-09-30 09:58:37,595 [salt.state       :1941][INFO    ][20632] Completed state [aodh-notifier] at time 09:58:37.595766 duration_in_ms=102.767
2018-09-30 09:58:37,596 [salt.state       :1770][INFO    ][20632] Running state [aodh-notifier] at time 09:58:37.596020
2018-09-30 09:58:37,596 [salt.state       :1803][INFO    ][20632] Executing state service.mod_watch for [aodh-notifier]
2018-09-30 09:58:37,597 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-09-30 09:58:37,612 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-09-30 09:58:42,988 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095842972537
2018-09-30 09:58:43,013 [salt.minion      :1431][INFO    ][27534] Starting a new job with PID 27534
2018-09-30 09:58:43,049 [salt.minion      :1708][INFO    ][27534] Returning information for job: 20180930095842972537
2018-09-30 09:58:52,699 [salt.state       :290 ][INFO    ][20632] {'aodh-notifier': True}
2018-09-30 09:58:52,700 [salt.state       :1941][INFO    ][20632] Completed state [aodh-notifier] at time 09:58:52.700523 duration_in_ms=15104.502
2018-09-30 09:58:52,713 [salt.state       :1770][INFO    ][20632] Running state [aodh-listener] at time 09:58:52.713371
2018-09-30 09:58:52,714 [salt.state       :1803][INFO    ][20632] Executing state service.running for [aodh-listener]
2018-09-30 09:58:52,724 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-09-30 09:58:52,768 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-09-30 09:58:52,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-09-30 09:58:52,812 [salt.state       :290 ][INFO    ][20632] The service aodh-listener is already running
2018-09-30 09:58:52,813 [salt.state       :1941][INFO    ][20632] Completed state [aodh-listener] at time 09:58:52.813760 duration_in_ms=100.39
2018-09-30 09:58:52,814 [salt.state       :1770][INFO    ][20632] Running state [aodh-listener] at time 09:58:52.814542
2018-09-30 09:58:52,815 [salt.state       :1803][INFO    ][20632] Executing state service.mod_watch for [aodh-listener]
2018-09-30 09:58:52,817 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-09-30 09:58:52,837 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20632] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-09-30 09:58:53,163 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095853149504
2018-09-30 09:58:53,179 [salt.minion      :1431][INFO    ][27594] Starting a new job with PID 27594
2018-09-30 09:58:53,194 [salt.minion      :1708][INFO    ][27594] Returning information for job: 20180930095853149504
2018-09-30 09:59:03,311 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930095903294707
2018-09-30 09:59:03,336 [salt.minion      :1431][INFO    ][27620] Starting a new job with PID 27620
2018-09-30 09:59:03,367 [salt.minion      :1708][INFO    ][27620] Returning information for job: 20180930095903294707
2018-09-30 09:59:07,955 [salt.state       :290 ][INFO    ][20632] {'aodh-listener': True}
2018-09-30 09:59:07,956 [salt.state       :1941][INFO    ][20632] Completed state [aodh-listener] at time 09:59:07.956774 duration_in_ms=15142.23
2018-09-30 09:59:07,973 [salt.minion      :1708][INFO    ][20632] Returning information for job: 20180930095726848579
2018-09-30 10:02:30,438 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command state.sls with jid 20180930100230424086
2018-09-30 10:02:30,462 [salt.minion      :1431][INFO    ][27678] Starting a new job with PID 27678
2018-09-30 10:02:34,572 [salt.state       :905 ][INFO    ][27678] Loading fresh modules for state activity
2018-09-30 10:02:34,774 [salt.fileclient  :1215][INFO    ][27678] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-09-30 10:02:35,213 [salt.fileclient  :1215][INFO    ][27678] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-09-30 10:02:35,512 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930100235497458
2018-09-30 10:02:35,546 [salt.minion      :1431][INFO    ][27689] Starting a new job with PID 27689
2018-09-30 10:02:35,576 [salt.minion      :1708][INFO    ][27689] Returning information for job: 20180930100235497458
2018-09-30 10:02:36,737 [salt.state       :1770][INFO    ][27678] Running state [ceilometer-agent-central] at time 10:02:36.736958
2018-09-30 10:02:36,737 [salt.state       :1803][INFO    ][27678] Executing state pkg.installed for [ceilometer-agent-central]
2018-09-30 10:02:36,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 10:02:37,369 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-09-30 10:02:37,586 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-30 10:02:39,871 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 10:02:39,904 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-09-30 10:02:45,554 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930100245538792
2018-09-30 10:02:45,585 [salt.minion      :1431][INFO    ][28106] Starting a new job with PID 28106
2018-09-30 10:02:45,625 [salt.minion      :1708][INFO    ][28106] Returning information for job: 20180930100245538792
2018-09-30 10:02:55,588 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930100255572795
2018-09-30 10:02:55,620 [salt.minion      :1431][INFO    ][28352] Starting a new job with PID 28352
2018-09-30 10:02:55,663 [salt.minion      :1708][INFO    ][28352] Returning information for job: 20180930100255572795
2018-09-30 10:03:05,628 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930100305614076
2018-09-30 10:03:05,662 [salt.minion      :1431][INFO    ][28591] Starting a new job with PID 28591
2018-09-30 10:03:05,698 [salt.minion      :1708][INFO    ][28591] Returning information for job: 20180930100305614076
2018-09-30 10:03:15,667 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930100315654141
2018-09-30 10:03:15,693 [salt.minion      :1431][INFO    ][29257] Starting a new job with PID 29257
2018-09-30 10:03:15,750 [salt.minion      :1708][INFO    ][29257] Returning information for job: 20180930100315654141
2018-09-30 10:03:25,700 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930100325686344
2018-09-30 10:03:25,728 [salt.minion      :1431][INFO    ][29938] Starting a new job with PID 29938
2018-09-30 10:03:25,763 [salt.minion      :1708][INFO    ][29938] Returning information for job: 20180930100325686344
2018-09-30 10:03:34,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 10:03:34,501 [salt.state       :290 ][INFO    ][27678] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0ubuntu2~cloud0'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.3~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.3~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'qemu-system-x86-64' changed from 'absent' to '1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python2.7-twisted-core' changed from 'absent' to '1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.3~cloud0'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libflac8' changed from 'absent' to '1.3.1-4'
'librados2' changed from 'absent' to '12.2.4-0ubuntu1~cloud1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.4-0ubuntu1~cloud1'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-09-30 10:03:34,550 [salt.state       :905 ][INFO    ][27678] Loading fresh modules for state activity
2018-09-30 10:03:34,731 [salt.state       :1941][INFO    ][27678] Completed state [ceilometer-agent-central] at time 10:03:34.731717 duration_in_ms=57994.757
2018-09-30 10:03:34,745 [salt.state       :1770][INFO    ][27678] Running state [python-ceilometerclient] at time 10:03:34.745119
2018-09-30 10:03:34,746 [salt.state       :1803][INFO    ][27678] Executing state pkg.installed for [python-ceilometerclient]
2018-09-30 10:03:35,411 [salt.state       :290 ][INFO    ][27678] All specified packages are already installed
2018-09-30 10:03:35,412 [salt.state       :1941][INFO    ][27678] Completed state [python-ceilometerclient] at time 10:03:35.412554 duration_in_ms=667.436
2018-09-30 10:03:35,413 [salt.state       :1770][INFO    ][27678] Running state [ceilometer-agent-notification] at time 10:03:35.413483
2018-09-30 10:03:35,414 [salt.state       :1803][INFO    ][27678] Executing state pkg.installed for [ceilometer-agent-notification]
2018-09-30 10:03:35,439 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-30 10:03:35,499 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-09-30 10:03:35,729 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930100335715806
2018-09-30 10:03:35,765 [salt.minion      :1431][INFO    ][30214] Starting a new job with PID 30214
2018-09-30 10:03:35,798 [salt.minion      :1708][INFO    ][30214] Returning information for job: 20180930100335715806
2018-09-30 10:03:40,577 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-30 10:03:40,676 [salt.state       :290 ][INFO    ][27678] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-09-30 10:03:40,715 [salt.state       :905 ][INFO    ][27678] Loading fresh modules for state activity
2018-09-30 10:03:40,754 [salt.state       :1941][INFO    ][27678] Completed state [ceilometer-agent-notification] at time 10:03:40.754555 duration_in_ms=5341.073
2018-09-30 10:03:40,760 [salt.state       :1770][INFO    ][27678] Running state [/etc/ceilometer/ceilometer.conf] at time 10:03:40.760460
2018-09-30 10:03:40,761 [salt.state       :1803][INFO    ][27678] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-09-30 10:03:40,795 [salt.fileclient  :1215][INFO    ][27678] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-09-30 10:03:40,955 [salt.fileclient  :1215][INFO    ][27678] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-09-30 10:03:40,971 [salt.fileclient  :1215][INFO    ][27678] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-09-30 10:03:40,999 [salt.state       :290 ][INFO    ][27678] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-09-30 10:03:41,007 [salt.state       :1941][INFO    ][27678] Completed state [/etc/ceilometer/ceilometer.conf] at time 10:03:41.007917 duration_in_ms=247.457
2018-09-30 10:03:41,009 [salt.state       :1770][INFO    ][27678] Running state [/etc/default/ceilometer-agent-central] at time 10:03:41.009754
2018-09-30 10:03:41,010 [salt.state       :1803][INFO    ][27678] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-09-30 10:03:41,049 [salt.fileclient  :1215][INFO    ][27678] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-09-30 10:03:41,075 [salt.state       :290 ][INFO    ][27678] File changed:
New file
2018-09-30 10:03:41,075 [salt.state       :1941][INFO    ][27678] Completed state [/etc/default/ceilometer-agent-central] at time 10:03:41.075437 duration_in_ms=65.683
2018-09-30 10:03:41,075 [salt.state       :1770][INFO    ][27678] Running state [/etc/default/ceilometer-agent-notification] at time 10:03:41.075749
2018-09-30 10:03:41,075 [salt.state       :1803][INFO    ][27678] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-09-30 10:03:41,120 [salt.state       :290 ][INFO    ][27678] File changed:
New file
2018-09-30 10:03:41,120 [salt.state       :1941][INFO    ][27678] Completed state [/etc/default/ceilometer-agent-notification] at time 10:03:41.120742 duration_in_ms=44.993
2018-09-30 10:03:41,134 [salt.state       :1770][INFO    ][27678] Running state [python-gnocchiclient] at time 10:03:41.134080
2018-09-30 10:03:41,134 [salt.state       :1803][INFO    ][27678] Executing state pkg.latest for [python-gnocchiclient]
2018-09-30 10:03:41,154 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-09-30 10:03:41,499 [salt.state       :290 ][INFO    ][27678] Package python-gnocchiclient is already up-to-date
2018-09-30 10:03:41,499 [salt.state       :1941][INFO    ][27678] Completed state [python-gnocchiclient] at time 10:03:41.499657 duration_in_ms=365.577
2018-09-30 10:03:41,500 [salt.state       :1770][INFO    ][27678] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 10:03:41.500540
2018-09-30 10:03:41,500 [salt.state       :1803][INFO    ][27678] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2018-09-30 10:03:41,518 [salt.fileclient  :1215][INFO    ][27678] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gnocchi_resources.yaml'
2018-09-30 10:03:41,535 [salt.state       :290 ][INFO    ][27678] File changed:
New file
2018-09-30 10:03:41,535 [salt.state       :1941][INFO    ][27678] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 10:03:41.535538 duration_in_ms=34.998
2018-09-30 10:03:41,539 [salt.state       :1770][INFO    ][27678] Running state [ceilometer-upgrade] at time 10:03:41.539297
2018-09-30 10:03:41,539 [salt.state       :1803][INFO    ][27678] Executing state cmd.run for [ceilometer-upgrade]
2018-09-30 10:03:41,540 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command 'ceilometer-upgrade' in directory '/root'
2018-09-30 10:03:45,748 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930100345735811
2018-09-30 10:03:45,764 [salt.minion      :1431][INFO    ][30524] Starting a new job with PID 30524
2018-09-30 10:03:45,779 [salt.minion      :1708][INFO    ][30524] Returning information for job: 20180930100345735811
2018-09-30 10:03:55,941 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930100355926201
2018-09-30 10:03:55,967 [salt.minion      :1431][INFO    ][30531] Starting a new job with PID 30531
2018-09-30 10:03:55,999 [salt.minion      :1708][INFO    ][30531] Returning information for job: 20180930100355926201
2018-09-30 10:04:06,157 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command saltutil.find_job with jid 20180930100406141808
2018-09-30 10:04:06,181 [salt.minion      :1431][INFO    ][30536] Starting a new job with PID 30536
2018-09-30 10:04:06,213 [salt.minion      :1708][INFO    ][30536] Returning information for job: 20180930100406141808
2018-09-30 10:04:10,393 [salt.state       :290 ][INFO    ][27678] {'pid': 30512, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-09-30 10:04:10,395 [salt.state       :1941][INFO    ][27678] Completed state [ceilometer-upgrade] at time 10:04:10.395106 duration_in_ms=28855.807
2018-09-30 10:04:10,396 [salt.state       :1770][INFO    ][27678] Running state [/etc/ceilometer/pipeline.yaml] at time 10:04:10.396549
2018-09-30 10:04:10,397 [salt.state       :1803][INFO    ][27678] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-09-30 10:04:10,426 [salt.fileclient  :1215][INFO    ][27678] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-09-30 10:04:10,524 [salt.state       :290 ][INFO    ][27678] File changed:
New file
2018-09-30 10:04:10,525 [salt.state       :1941][INFO    ][27678] Completed state [/etc/ceilometer/pipeline.yaml] at time 10:04:10.524893 duration_in_ms=128.342
2018-09-30 10:04:10,525 [salt.state       :1770][INFO    ][27678] Running state [/etc/ceilometer/event_pipeline.yaml] at time 10:04:10.525721
2018-09-30 10:04:10,526 [salt.state       :1803][INFO    ][27678] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-09-30 10:04:10,548 [salt.fileclient  :1215][INFO    ][27678] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-09-30 10:04:10,633 [salt.state       :290 ][INFO    ][27678] File changed:
New file
2018-09-30 10:04:10,634 [salt.state       :1941][INFO    ][27678] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 10:04:10.634033 duration_in_ms=108.313
2018-09-30 10:04:10,635 [salt.state       :1770][INFO    ][27678] Running state [/etc/ceilometer/event_definitions.yaml] at time 10:04:10.634949
2018-09-30 10:04:10,635 [salt.state       :1803][INFO    ][27678] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-09-30 10:04:10,657 [salt.fileclient  :1215][INFO    ][27678] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-09-30 10:04:10,680 [salt.state       :290 ][INFO    ][27678] File changed:
New file
2018-09-30 10:04:10,681 [salt.state       :1941][INFO    ][27678] Completed state [/etc/ceilometer/event_definitions.yaml] at time 10:04:10.681691 duration_in_ms=46.741
2018-09-30 10:04:10,682 [salt.state       :1770][INFO    ][27678] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 10:04:10.682814
2018-09-30 10:04:10,683 [salt.state       :1803][INFO    ][27678] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-09-30 10:04:10,705 [salt.fileclient  :1215][INFO    ][27678] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-09-30 10:04:10,718 [salt.state       :290 ][INFO    ][27678] File changed:
New file
2018-09-30 10:04:10,719 [salt.state       :1941][INFO    ][27678] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 10:04:10.718874 duration_in_ms=36.06
2018-09-30 10:04:11,277 [salt.state       :1770][INFO    ][27678] Running state [ceilometer-agent-central] at time 10:04:11.277810
2018-09-30 10:04:11,278 [salt.state       :1803][INFO    ][27678] Executing state service.running for [ceilometer-agent-central]
2018-09-30 10:04:11,279 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-09-30 10:04:11,307 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-09-30 10:04:11,325 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-09-30 10:04:11,343 [salt.state       :290 ][INFO    ][27678] The service ceilometer-agent-central is already running
2018-09-30 10:04:11,344 [salt.state       :1941][INFO    ][27678] Completed state [ceilometer-agent-central] at time 10:04:11.344649 duration_in_ms=66.84
2018-09-30 10:04:11,345 [salt.state       :1770][INFO    ][27678] Running state [ceilometer-agent-central] at time 10:04:11.345436
2018-09-30 10:04:11,346 [salt.state       :1803][INFO    ][27678] Executing state service.mod_watch for [ceilometer-agent-central]
2018-09-30 10:04:11,348 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-09-30 10:04:11,366 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-09-30 10:04:11,595 [salt.state       :290 ][INFO    ][27678] {'ceilometer-agent-central': True}
2018-09-30 10:04:11,596 [salt.state       :1941][INFO    ][27678] Completed state [ceilometer-agent-central] at time 10:04:11.596214 duration_in_ms=250.777
2018-09-30 10:04:11,597 [salt.state       :1770][INFO    ][27678] Running state [ceilometer-agent-notification] at time 10:04:11.597285
2018-09-30 10:04:11,597 [salt.state       :1803][INFO    ][27678] Executing state service.running for [ceilometer-agent-notification]
2018-09-30 10:04:11,598 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-09-30 10:04:11,626 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-09-30 10:04:11,650 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-09-30 10:04:11,675 [salt.state       :290 ][INFO    ][27678] The service ceilometer-agent-notification is already running
2018-09-30 10:04:11,676 [salt.state       :1941][INFO    ][27678] Completed state [ceilometer-agent-notification] at time 10:04:11.676279 duration_in_ms=78.994
2018-09-30 10:04:11,676 [salt.state       :1770][INFO    ][27678] Running state [ceilometer-agent-notification] at time 10:04:11.676564
2018-09-30 10:04:11,676 [salt.state       :1803][INFO    ][27678] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-09-30 10:04:11,677 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-09-30 10:04:11,692 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27678] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-09-30 10:04:11,836 [salt.state       :290 ][INFO    ][27678] {'ceilometer-agent-notification': True}
2018-09-30 10:04:11,836 [salt.state       :1941][INFO    ][27678] Completed state [ceilometer-agent-notification] at time 10:04:11.836470 duration_in_ms=159.906
2018-09-30 10:04:11,852 [salt.minion      :1708][INFO    ][27678] Returning information for job: 20180930100230424086
2018-09-30 10:11:37,444 [salt.minion      :1307][INFO    ][3178] User sudo_ubuntu Executing command cp.push_dir with jid 20180930101137430583
2018-09-30 10:11:37,478 [salt.minion      :1431][INFO    ][30706] Starting a new job with PID 30706
