2018-09-11 22:47:33,318 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:34,253 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:34,259 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:34,264 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:34,267 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:35,930 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:35,936 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:35,941 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:36,472 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:36,475 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:36,477 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:36,480 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,238 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,448 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,451 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,454 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,457 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,460 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,463 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,466 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,469 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,472 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,475 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,478 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,481 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,483 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,486 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,489 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,492 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,494 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,497 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,500 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,503 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,506 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,508 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,511 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,514 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,516 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,519 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,522 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,524 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,527 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,529 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,532 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,535 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,537 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,540 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,542 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,545 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,548 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,550 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,553 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,555 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,558 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,560 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,563 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:47:37,565 [salt.utils.decorators:82  ][ERROR   ][1924] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-09-11 22:48:31,268 [salt.utils.decorators:613 ][WARNING ][1924] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-11 22:48:35,721 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3129] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-09-11 22:48:35,763 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3129] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-09-11 22:48:35,788 [salt.utils.parsers:1051][WARNING ][1550] Minion received a SIGTERM. Exiting.
2018-09-11 22:48:36,626 [salt.cli.daemons :293 ][INFO    ][3184] Setting up the Salt Minion "mdb01.mcp-ovs-ha.local"
2018-09-11 22:48:36,710 [salt.cli.daemons :82  ][INFO    ][3184] Starting up the Salt Minion
2018-09-11 22:48:36,711 [salt.utils.event :1017][INFO    ][3184] Starting pull socket on /var/run/salt/minion/minion_event_b0741cc873_pull.ipc
2018-09-11 22:48:37,260 [salt.minion      :976 ][INFO    ][3184] Creating minion process manager
2018-09-11 22:48:38,352 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3184] Executing command ['date', '+%z'] in directory '/root'
2018-09-11 22:48:38,685 [salt.utils.schedule:568 ][INFO    ][3184] Updating job settings for scheduled job: __mine_interval
2018-09-11 22:48:38,760 [salt.minion      :1107][INFO    ][3184] Added mine.update to scheduler
2018-09-11 22:48:38,855 [salt.minion      :1965][INFO    ][3184] Minion is starting as user 'root'
2018-09-11 22:48:38,871 [salt.minion      :2324][INFO    ][3184] Minion is ready to receive requests!
2018-09-11 22:49:53,055 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command state.apply with jid 20180911224953046358
2018-09-11 22:49:53,083 [salt.minion      :1431][INFO    ][3288] Starting a new job with PID 3288
2018-09-11 22:49:57,040 [salt.state       :905 ][INFO    ][3288] Loading fresh modules for state activity
2018-09-11 22:49:58,075 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911224958068440
2018-09-11 22:49:58,123 [salt.minion      :1431][INFO    ][3295] Starting a new job with PID 3295
2018-09-11 22:49:58,139 [salt.minion      :1708][INFO    ][3295] Returning information for job: 20180911224958068440
2018-09-11 22:49:58,849 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-09-11 22:49:58,882 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-09-11 22:49:58,974 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-09-11 22:49:59,071 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-09-11 22:49:59,160 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-09-11 22:49:59,312 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-09-11 22:49:59,390 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-09-11 22:49:59,456 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-09-11 22:49:59,542 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-09-11 22:50:00,298 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-09-11 22:50:00,385 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-09-11 22:50:00,483 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-09-11 22:50:00,571 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-09-11 22:50:00,645 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-09-11 22:50:00,715 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-09-11 22:50:00,783 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-09-11 22:50:00,853 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-09-11 22:50:00,926 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-09-11 22:50:00,999 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-09-11 22:50:01,067 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-09-11 22:50:01,178 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-09-11 22:50:01,315 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-09-11 22:50:01,388 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-09-11 22:50:01,463 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-09-11 22:50:01,481 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-09-11 22:50:01,513 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-09-11 22:50:01,566 [salt.state       :1770][INFO    ][3288] Running state [/etc/environment] at time 22:50:01.566262
2018-09-11 22:50:01,566 [salt.state       :1803][INFO    ][3288] Executing state file.blockreplace for [/etc/environment]
2018-09-11 22:50:01,572 [salt.state       :290 ][INFO    ][3288] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-09-11 22:50:01,574 [salt.state       :1941][INFO    ][3288] Completed state [/etc/environment] at time 22:50:01.574123 duration_in_ms=7.862
2018-09-11 22:50:01,574 [salt.state       :1770][INFO    ][3288] Running state [/etc/profile.d] at time 22:50:01.574514
2018-09-11 22:50:01,574 [salt.state       :1803][INFO    ][3288] Executing state file.directory for [/etc/profile.d]
2018-09-11 22:50:01,589 [salt.state       :290 ][INFO    ][3288] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-09-11 22:50:01,591 [salt.state       :1941][INFO    ][3288] Completed state [/etc/profile.d] at time 22:50:01.591047 duration_in_ms=16.531
2018-09-11 22:50:02,117 [salt.state       :1770][INFO    ][3288] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 22:50:02.117470
2018-09-11 22:50:02,118 [salt.state       :1803][INFO    ][3288] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-09-11 22:50:02,246 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-09-11 22:50:02,270 [salt.state       :290 ][INFO    ][3288] File changed:
New file
2018-09-11 22:50:02,271 [salt.state       :1941][INFO    ][3288] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 22:50:02.271113 duration_in_ms=153.643
2018-09-11 22:50:02,271 [salt.state       :1770][INFO    ][3288] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 22:50:02.271554
2018-09-11 22:50:02,272 [salt.state       :1803][INFO    ][3288] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-09-11 22:50:02,290 [salt.state       :290 ][INFO    ][3288] File changed:
New file
2018-09-11 22:50:02,291 [salt.state       :1941][INFO    ][3288] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 22:50:02.291611 duration_in_ms=20.057
2018-09-11 22:50:02,292 [salt.state       :1770][INFO    ][3288] Running state [linux_repo_prereq_pkgs] at time 22:50:02.292870
2018-09-11 22:50:02,293 [salt.state       :1803][INFO    ][3288] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-09-11 22:50:02,294 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 22:50:02,652 [salt.state       :290 ][INFO    ][3288] All specified packages are already installed
2018-09-11 22:50:02,653 [salt.state       :1941][INFO    ][3288] Completed state [linux_repo_prereq_pkgs] at time 22:50:02.653258 duration_in_ms=360.387
2018-09-11 22:50:02,653 [salt.state       :1770][INFO    ][3288] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 22:50:02.653766
2018-09-11 22:50:02,654 [salt.state       :1803][INFO    ][3288] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-09-11 22:50:02,654 [salt.state       :290 ][INFO    ][3288] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-09-11 22:50:02,655 [salt.state       :1941][INFO    ][3288] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 22:50:02.655186 duration_in_ms=1.42
2018-09-11 22:50:02,655 [salt.state       :1770][INFO    ][3288] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 22:50:02.655566
2018-09-11 22:50:02,655 [salt.state       :1803][INFO    ][3288] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-09-11 22:50:02,656 [salt.state       :290 ][INFO    ][3288] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-09-11 22:50:02,656 [salt.state       :1941][INFO    ][3288] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 22:50:02.656722 duration_in_ms=1.156
2018-09-11 22:50:02,657 [salt.state       :1770][INFO    ][3288] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 22:50:02.657096
2018-09-11 22:50:02,657 [salt.state       :1803][INFO    ][3288] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-09-11 22:50:02,672 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-09-11 22:50:02,733 [salt.state       :290 ][INFO    ][3288] File changed:
New file
2018-09-11 22:50:02,734 [salt.state       :1941][INFO    ][3288] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 22:50:02.734471 duration_in_ms=77.375
2018-09-11 22:50:02,744 [salt.state       :1770][INFO    ][3288] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 22:50:02.744063
2018-09-11 22:50:02,744 [salt.state       :1803][INFO    ][3288] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-09-11 22:50:03,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-09-11 22:50:04,008 [salt.state       :290 ][INFO    ][3288] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-09-11 22:50:04,009 [salt.state       :1941][INFO    ][3288] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 22:50:04.009594 duration_in_ms=1265.531
2018-09-11 22:50:04,010 [salt.state       :1770][INFO    ][3288] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 22:50:04.010092
2018-09-11 22:50:04,010 [salt.state       :1803][INFO    ][3288] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-09-11 22:50:04,011 [salt.state       :290 ][INFO    ][3288] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-09-11 22:50:04,011 [salt.state       :1941][INFO    ][3288] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 22:50:04.011583 duration_in_ms=1.491
2018-09-11 22:50:04,012 [salt.state       :1770][INFO    ][3288] Running state [/etc/apt/preferences.d/uca] at time 22:50:04.011961
2018-09-11 22:50:04,012 [salt.state       :1803][INFO    ][3288] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-09-11 22:50:04,231 [salt.state       :290 ][INFO    ][3288] File changed:
New file
2018-09-11 22:50:04,232 [salt.state       :1941][INFO    ][3288] Completed state [/etc/apt/preferences.d/uca] at time 22:50:04.232278 duration_in_ms=220.317
2018-09-11 22:50:04,233 [salt.state       :1770][INFO    ][3288] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 22:50:04.233942
2018-09-11 22:50:04,234 [salt.state       :1803][INFO    ][3288] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-09-11 22:50:04,280 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['apt-key', 'export', 'EC4926EA'] in directory '/root'
2018-09-11 22:50:04,369 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['apt-key', 'adv', '--keyserver', 'keyserver.ubuntu.com', '--logger-fd', '1', '--recv-keys', 'EC4926EA'] in directory '/root'
2018-09-11 22:50:05,004 [salt.state       :290 ][INFO    ][3288] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-09-11 22:50:05,005 [salt.state       :1941][INFO    ][3288] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 22:50:05.005656 duration_in_ms=771.713
2018-09-11 22:50:05,007 [salt.state       :1770][INFO    ][3288] Running state [pkg.refresh_db] at time 22:50:05.007026
2018-09-11 22:50:05,007 [salt.state       :1803][INFO    ][3288] Executing state module.run for [pkg.refresh_db]
2018-09-11 22:50:05,008 [salt.utils.decorators:613 ][WARNING ][3288] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-11 22:50:05,008 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-11 22:50:08,212 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225008202705
2018-09-11 22:50:08,240 [salt.minion      :1431][INFO    ][4011] Starting a new job with PID 4011
2018-09-11 22:50:08,264 [salt.minion      :1708][INFO    ][4011] Returning information for job: 20180911225008202705
2018-09-11 22:50:10,007 [salt.state       :290 ][INFO    ][3288] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': False, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-09-11 22:50:10,007 [salt.state       :1941][INFO    ][3288] Completed state [pkg.refresh_db] at time 22:50:10.007560 duration_in_ms=5000.533
2018-09-11 22:50:10,007 [salt.state       :1770][INFO    ][3288] Running state [linux_extra_packages_latest] at time 22:50:10.007873
2018-09-11 22:50:10,008 [salt.state       :1803][INFO    ][3288] Executing state pkg.latest for [linux_extra_packages_latest]
2018-09-11 22:50:10,019 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-09-11 22:50:10,130 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-11 22:50:10,152 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-09-11 22:50:16,353 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 22:50:16,381 [salt.state       :290 ][INFO    ][3288] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-09-11 22:50:16,403 [salt.state       :905 ][INFO    ][3288] Loading fresh modules for state activity
2018-09-11 22:50:16,426 [salt.state       :1941][INFO    ][3288] Completed state [linux_extra_packages_latest] at time 22:50:16.426016 duration_in_ms=6418.142
2018-09-11 22:50:16,450 [salt.state       :1770][INFO    ][3288] Running state [UTC] at time 22:50:16.450682
2018-09-11 22:50:16,451 [salt.state       :1803][INFO    ][3288] Executing state timezone.system for [UTC]
2018-09-11 22:50:16,454 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['timedatectl'] in directory '/root'
2018-09-11 22:50:16,806 [salt.state       :290 ][INFO    ][3288] Timezone UTC already set, UTC already set to UTC
2018-09-11 22:50:16,807 [salt.state       :1941][INFO    ][3288] Completed state [UTC] at time 22:50:16.807325 duration_in_ms=356.642
2018-09-11 22:50:16,864 [salt.state       :1770][INFO    ][3288] Running state [nf_conntrack] at time 22:50:16.864868
2018-09-11 22:50:16,865 [salt.state       :1803][INFO    ][3288] Executing state kmod.present for [nf_conntrack]
2018-09-11 22:50:16,866 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'lsmod' in directory '/root'
2018-09-11 22:50:17,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'lsmod' in directory '/root'
2018-09-11 22:50:17,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-09-11 22:50:17,684 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'lsmod' in directory '/root'
2018-09-11 22:50:17,761 [salt.state       :290 ][INFO    ][3288] {'nf_conntrack': 'loaded'}
2018-09-11 22:50:17,762 [salt.state       :1941][INFO    ][3288] Completed state [nf_conntrack] at time 22:50:17.762461 duration_in_ms=897.594
2018-09-11 22:50:17,866 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.tcp_keepalive_probes] at time 22:50:17.866137
2018-09-11 22:50:17,867 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-09-11 22:50:17,869 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-09-11 22:50:17,905 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.tcp_keepalive_probes': 8}
2018-09-11 22:50:17,906 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.tcp_keepalive_probes] at time 22:50:17.906283 duration_in_ms=40.146
2018-09-11 22:50:17,907 [salt.state       :1770][INFO    ][3288] Running state [fs.file-max] at time 22:50:17.907053
2018-09-11 22:50:17,907 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [fs.file-max]
2018-09-11 22:50:17,909 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-09-11 22:50:17,927 [salt.state       :290 ][INFO    ][3288] {'fs.file-max': 124165}
2018-09-11 22:50:17,928 [salt.state       :1941][INFO    ][3288] Completed state [fs.file-max] at time 22:50:17.928083 duration_in_ms=21.029
2018-09-11 22:50:17,929 [salt.state       :1770][INFO    ][3288] Running state [net.core.somaxconn] at time 22:50:17.928969
2018-09-11 22:50:17,929 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.core.somaxconn]
2018-09-11 22:50:17,995 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-09-11 22:50:18,018 [salt.state       :290 ][INFO    ][3288] {'net.core.somaxconn': 4096}
2018-09-11 22:50:18,019 [salt.state       :1941][INFO    ][3288] Completed state [net.core.somaxconn] at time 22:50:18.019788 duration_in_ms=90.818
2018-09-11 22:50:18,021 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.tcp_max_syn_backlog] at time 22:50:18.021121
2018-09-11 22:50:18,022 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-09-11 22:50:18,097 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-09-11 22:50:18,117 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-09-11 22:50:18,117 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.tcp_max_syn_backlog] at time 22:50:18.117772 duration_in_ms=96.652
2018-09-11 22:50:18,118 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.tcp_tw_reuse] at time 22:50:18.118604
2018-09-11 22:50:18,119 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-09-11 22:50:18,121 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-09-11 22:50:18,134 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.tcp_tw_reuse': 1}
2018-09-11 22:50:18,135 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.tcp_tw_reuse] at time 22:50:18.135174 duration_in_ms=16.57
2018-09-11 22:50:18,135 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.tcp_congestion_control] at time 22:50:18.135717
2018-09-11 22:50:18,136 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-09-11 22:50:18,242 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225018236968
2018-09-11 22:50:18,267 [salt.minion      :1431][INFO    ][4216] Starting a new job with PID 4216
2018-09-11 22:50:18,283 [salt.minion      :1708][INFO    ][4216] Returning information for job: 20180911225018236968
2018-09-11 22:50:18,288 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-09-11 22:50:18,308 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-09-11 22:50:18,309 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.tcp_congestion_control] at time 22:50:18.309515 duration_in_ms=173.798
2018-09-11 22:50:18,310 [salt.state       :1770][INFO    ][3288] Running state [net.nf_conntrack_max] at time 22:50:18.310071
2018-09-11 22:50:18,310 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.nf_conntrack_max]
2018-09-11 22:50:18,311 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-09-11 22:50:18,326 [salt.state       :290 ][INFO    ][3288] {'net.nf_conntrack_max': 1048576}
2018-09-11 22:50:18,327 [salt.state       :1941][INFO    ][3288] Completed state [net.nf_conntrack_max] at time 22:50:18.327448 duration_in_ms=17.377
2018-09-11 22:50:18,328 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.tcp_retries2] at time 22:50:18.328139
2018-09-11 22:50:18,328 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-09-11 22:50:18,330 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-09-11 22:50:18,340 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.tcp_retries2': 5}
2018-09-11 22:50:18,341 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.tcp_retries2] at time 22:50:18.341277 duration_in_ms=13.138
2018-09-11 22:50:18,341 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.tcp_fin_timeout] at time 22:50:18.341870
2018-09-11 22:50:18,342 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-09-11 22:50:18,391 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-09-11 22:50:18,412 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.tcp_fin_timeout': 30}
2018-09-11 22:50:18,413 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.tcp_fin_timeout] at time 22:50:18.412996 duration_in_ms=71.125
2018-09-11 22:50:18,413 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.tcp_slow_start_after_idle] at time 22:50:18.413880
2018-09-11 22:50:18,414 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-09-11 22:50:18,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-09-11 22:50:18,430 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-09-11 22:50:18,431 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 22:50:18.431455 duration_in_ms=17.576
2018-09-11 22:50:18,432 [salt.state       :1770][INFO    ][3288] Running state [vm.swappiness] at time 22:50:18.432084
2018-09-11 22:50:18,432 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [vm.swappiness]
2018-09-11 22:50:18,498 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-09-11 22:50:18,521 [salt.state       :290 ][INFO    ][3288] {'vm.swappiness': 10}
2018-09-11 22:50:18,522 [salt.state       :1941][INFO    ][3288] Completed state [vm.swappiness] at time 22:50:18.521964 duration_in_ms=89.878
2018-09-11 22:50:18,523 [salt.state       :1770][INFO    ][3288] Running state [net.core.netdev_max_backlog] at time 22:50:18.522996
2018-09-11 22:50:18,523 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-09-11 22:50:18,540 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-09-11 22:50:18,559 [salt.state       :290 ][INFO    ][3288] {'net.core.netdev_max_backlog': 261144}
2018-09-11 22:50:18,560 [salt.state       :1941][INFO    ][3288] Completed state [net.core.netdev_max_backlog] at time 22:50:18.560730 duration_in_ms=37.734
2018-09-11 22:50:18,562 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.neigh.default.gc_thresh1] at time 22:50:18.561908
2018-09-11 22:50:18,563 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-09-11 22:50:18,648 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-09-11 22:50:18,671 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-09-11 22:50:18,673 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 22:50:18.672883 duration_in_ms=110.975
2018-09-11 22:50:18,674 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.neigh.default.gc_thresh2] at time 22:50:18.674221
2018-09-11 22:50:18,675 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-09-11 22:50:18,678 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-09-11 22:50:18,692 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-09-11 22:50:18,693 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 22:50:18.692990 duration_in_ms=18.77
2018-09-11 22:50:18,693 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.neigh.default.gc_thresh3] at time 22:50:18.693595
2018-09-11 22:50:18,694 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-09-11 22:50:18,756 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-09-11 22:50:18,778 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-09-11 22:50:18,779 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 22:50:18.779123 duration_in_ms=85.527
2018-09-11 22:50:18,780 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.tcp_keepalive_intvl] at time 22:50:18.780011
2018-09-11 22:50:18,780 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-09-11 22:50:18,834 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-09-11 22:50:18,851 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-09-11 22:50:18,853 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.tcp_keepalive_intvl] at time 22:50:18.853130 duration_in_ms=73.117
2018-09-11 22:50:18,854 [salt.state       :1770][INFO    ][3288] Running state [net.ipv4.tcp_keepalive_time] at time 22:50:18.854244
2018-09-11 22:50:18,855 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-09-11 22:50:18,857 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-09-11 22:50:18,873 [salt.state       :290 ][INFO    ][3288] {'net.ipv4.tcp_keepalive_time': 30}
2018-09-11 22:50:18,873 [salt.state       :1941][INFO    ][3288] Completed state [net.ipv4.tcp_keepalive_time] at time 22:50:18.873903 duration_in_ms=19.659
2018-09-11 22:50:18,875 [salt.state       :1770][INFO    ][3288] Running state [kernel.panic] at time 22:50:18.875559
2018-09-11 22:50:18,876 [salt.state       :1803][INFO    ][3288] Executing state sysctl.present for [kernel.panic]
2018-09-11 22:50:18,912 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-09-11 22:50:18,933 [salt.state       :290 ][INFO    ][3288] {'kernel.panic': 60}
2018-09-11 22:50:18,933 [salt.state       :1941][INFO    ][3288] Completed state [kernel.panic] at time 22:50:18.933798 duration_in_ms=58.238
2018-09-11 22:50:18,941 [salt.state       :1770][INFO    ][3288] Running state [linux_sysfs_package] at time 22:50:18.941658
2018-09-11 22:50:18,942 [salt.state       :1803][INFO    ][3288] Executing state pkg.installed for [linux_sysfs_package]
2018-09-11 22:50:19,435 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-09-11 22:50:19,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-11 22:50:21,552 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-11 22:50:21,581 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-09-11 22:50:28,452 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225028442695
2018-09-11 22:50:28,475 [salt.minion      :1431][INFO    ][4834] Starting a new job with PID 4834
2018-09-11 22:50:28,491 [salt.minion      :1708][INFO    ][4834] Returning information for job: 20180911225028442695
2018-09-11 22:50:33,693 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 22:50:33,719 [salt.state       :290 ][INFO    ][3288] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-09-11 22:50:33,732 [salt.state       :905 ][INFO    ][3288] Loading fresh modules for state activity
2018-09-11 22:50:33,756 [salt.state       :1941][INFO    ][3288] Completed state [linux_sysfs_package] at time 22:50:33.756600 duration_in_ms=14814.942
2018-09-11 22:50:33,760 [salt.state       :1770][INFO    ][3288] Running state [/etc/sysfs.d] at time 22:50:33.760178
2018-09-11 22:50:33,760 [salt.state       :1803][INFO    ][3288] Executing state file.directory for [/etc/sysfs.d]
2018-09-11 22:50:33,763 [salt.state       :290 ][INFO    ][3288] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-09-11 22:50:33,763 [salt.state       :1941][INFO    ][3288] Completed state [/etc/sysfs.d] at time 22:50:33.763340 duration_in_ms=3.162
2018-09-11 22:50:34,067 [salt.state       :1770][INFO    ][3288] Running state [ondemand] at time 22:50:34.067779
2018-09-11 22:50:34,068 [salt.state       :1803][INFO    ][3288] Executing state service.dead for [ondemand]
2018-09-11 22:50:34,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-09-11 22:50:34,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-09-11 22:50:34,091 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-09-11 22:50:34,104 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-09-11 22:50:34,149 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-09-11 22:50:34,162 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-09-11 22:50:34,178 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-09-11 22:50:34,196 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-09-11 22:50:34,400 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-09-11 22:50:34,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'runlevel' in directory '/root'
2018-09-11 22:50:34,437 [salt.state       :290 ][INFO    ][3288] {'ondemand': True}
2018-09-11 22:50:34,437 [salt.state       :1941][INFO    ][3288] Completed state [ondemand] at time 22:50:34.437584 duration_in_ms=369.805
2018-09-11 22:50:34,567 [salt.state       :1770][INFO    ][3288] Running state [cs_CZ.UTF-8] at time 22:50:34.567064
2018-09-11 22:50:34,567 [salt.state       :1803][INFO    ][3288] Executing state locale.present for [cs_CZ.UTF-8]
2018-09-11 22:50:34,569 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'locale -a' in directory '/root'
2018-09-11 22:50:34,590 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['locale-gen', 'cs_CZ.utf8'] in directory '/root'
2018-09-11 22:50:35,672 [salt.state       :290 ][INFO    ][3288] {'locale': 'cs_CZ.UTF-8'}
2018-09-11 22:50:35,672 [salt.state       :1941][INFO    ][3288] Completed state [cs_CZ.UTF-8] at time 22:50:35.672420 duration_in_ms=1105.358
2018-09-11 22:50:35,672 [salt.state       :1770][INFO    ][3288] Running state [en_US.UTF-8] at time 22:50:35.672739
2018-09-11 22:50:35,673 [salt.state       :1803][INFO    ][3288] Executing state locale.present for [en_US.UTF-8]
2018-09-11 22:50:35,673 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'locale -a' in directory '/root'
2018-09-11 22:50:35,690 [salt.state       :290 ][INFO    ][3288] Locale en_US.UTF-8 is already present
2018-09-11 22:50:35,691 [salt.state       :1941][INFO    ][3288] Completed state [en_US.UTF-8] at time 22:50:35.690988 duration_in_ms=18.249
2018-09-11 22:50:35,692 [salt.state       :1770][INFO    ][3288] Running state [en_US.UTF-8] at time 22:50:35.692619
2018-09-11 22:50:35,692 [salt.state       :1803][INFO    ][3288] Executing state locale.system for [en_US.UTF-8]
2018-09-11 22:50:35,693 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'localectl' in directory '/root'
2018-09-11 22:50:37,090 [salt.state       :290 ][INFO    ][3288] System locale en_US.UTF-8 already set
2018-09-11 22:50:37,091 [salt.state       :1941][INFO    ][3288] Completed state [en_US.UTF-8] at time 22:50:37.091720 duration_in_ms=1399.099
2018-09-11 22:50:37,128 [salt.state       :1770][INFO    ][3288] Running state [root] at time 22:50:37.128776
2018-09-11 22:50:37,130 [salt.state       :1803][INFO    ][3288] Executing state group.present for [root]
2018-09-11 22:50:37,132 [salt.state       :290 ][INFO    ][3288] Group root is present and up to date
2018-09-11 22:50:37,133 [salt.state       :1941][INFO    ][3288] Completed state [root] at time 22:50:37.132929 duration_in_ms=4.154
2018-09-11 22:50:37,397 [salt.state       :1770][INFO    ][3288] Running state [root] at time 22:50:37.397613
2018-09-11 22:50:37,398 [salt.state       :1803][INFO    ][3288] Executing state user.present for [root]
2018-09-11 22:50:37,404 [salt.state       :290 ][INFO    ][3288] User root is present and up to date
2018-09-11 22:50:37,405 [salt.state       :1941][INFO    ][3288] Completed state [root] at time 22:50:37.404996 duration_in_ms=7.382
2018-09-11 22:50:37,406 [salt.state       :1770][INFO    ][3288] Running state [/root] at time 22:50:37.406496
2018-09-11 22:50:37,407 [salt.state       :1803][INFO    ][3288] Executing state file.directory for [/root]
2018-09-11 22:50:37,408 [salt.state       :290 ][INFO    ][3288] Directory /root is in the correct state
Directory /root updated
2018-09-11 22:50:37,409 [salt.state       :1941][INFO    ][3288] Completed state [/root] at time 22:50:37.409152 duration_in_ms=2.656
2018-09-11 22:50:37,409 [salt.state       :1770][INFO    ][3288] Running state [/etc/sudoers.d/90-salt-user-root] at time 22:50:37.409705
2018-09-11 22:50:37,410 [salt.state       :1803][INFO    ][3288] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-09-11 22:50:37,410 [salt.state       :290 ][INFO    ][3288] File /etc/sudoers.d/90-salt-user-root is not present
2018-09-11 22:50:37,411 [salt.state       :1941][INFO    ][3288] Completed state [/etc/sudoers.d/90-salt-user-root] at time 22:50:37.411078 duration_in_ms=1.373
2018-09-11 22:50:37,411 [salt.state       :1770][INFO    ][3288] Running state [ubuntu] at time 22:50:37.411513
2018-09-11 22:50:37,411 [salt.state       :1803][INFO    ][3288] Executing state group.present for [ubuntu]
2018-09-11 22:50:37,412 [salt.state       :290 ][INFO    ][3288] Group ubuntu is present and up to date
2018-09-11 22:50:37,412 [salt.state       :1941][INFO    ][3288] Completed state [ubuntu] at time 22:50:37.412922 duration_in_ms=1.409
2018-09-11 22:50:37,413 [salt.state       :1770][INFO    ][3288] Running state [ubuntu] at time 22:50:37.413880
2018-09-11 22:50:37,414 [salt.state       :1803][INFO    ][3288] Executing state user.present for [ubuntu]
2018-09-11 22:50:37,417 [salt.state       :290 ][INFO    ][3288] {'passwd': 'XXX-REDACTED-XXX'}
2018-09-11 22:50:37,418 [salt.state       :1941][INFO    ][3288] Completed state [ubuntu] at time 22:50:37.418106 duration_in_ms=4.226
2018-09-11 22:50:37,419 [salt.state       :1770][INFO    ][3288] Running state [/home/ubuntu] at time 22:50:37.419086
2018-09-11 22:50:37,419 [salt.state       :1803][INFO    ][3288] Executing state file.directory for [/home/ubuntu]
2018-09-11 22:50:37,420 [salt.state       :290 ][INFO    ][3288] {'mode': '0700'}
2018-09-11 22:50:37,421 [salt.state       :1941][INFO    ][3288] Completed state [/home/ubuntu] at time 22:50:37.421048 duration_in_ms=1.962
2018-09-11 22:50:37,421 [salt.state       :1770][INFO    ][3288] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 22:50:37.421926
2018-09-11 22:50:37,422 [salt.state       :1803][INFO    ][3288] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-09-11 22:50:37,441 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-09-11 22:50:37,454 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.yShddB' in directory '/root'
2018-09-11 22:50:37,693 [salt.state       :290 ][INFO    ][3288] File changed:
New file
2018-09-11 22:50:37,695 [salt.state       :1941][INFO    ][3288] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 22:50:37.694925 duration_in_ms=272.998
2018-09-11 22:50:37,695 [salt.state       :1770][INFO    ][3288] Running state [/etc/security/limits.d/90-salt-default.conf] at time 22:50:37.695827
2018-09-11 22:50:37,696 [salt.state       :1803][INFO    ][3288] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-09-11 22:50:37,723 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-09-11 22:50:38,622 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225038611849
2018-09-11 22:50:38,649 [salt.minion      :1431][INFO    ][5167] Starting a new job with PID 5167
2018-09-11 22:50:38,665 [salt.minion      :1708][INFO    ][5167] Returning information for job: 20180911225038611849
2018-09-11 22:50:38,800 [salt.state       :290 ][INFO    ][3288] File changed:
New file
2018-09-11 22:50:38,801 [salt.state       :1941][INFO    ][3288] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 22:50:38.801146 duration_in_ms=1105.317
2018-09-11 22:50:38,801 [salt.state       :1770][INFO    ][3288] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 22:50:38.801735
2018-09-11 22:50:38,802 [salt.state       :1803][INFO    ][3288] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-09-11 22:50:38,837 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-09-11 22:50:38,904 [salt.state       :290 ][INFO    ][3288] File changed:
New file
2018-09-11 22:50:38,904 [salt.state       :1941][INFO    ][3288] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 22:50:38.904779 duration_in_ms=103.044
2018-09-11 22:50:38,906 [salt.state       :1770][INFO    ][3288] Running state [service.systemctl_reload] at time 22:50:38.906564
2018-09-11 22:50:38,906 [salt.state       :1803][INFO    ][3288] Executing state module.wait for [service.systemctl_reload]
2018-09-11 22:50:38,907 [salt.state       :290 ][INFO    ][3288] No changes made for service.systemctl_reload
2018-09-11 22:50:38,907 [salt.state       :1941][INFO    ][3288] Completed state [service.systemctl_reload] at time 22:50:38.907185 duration_in_ms=0.621
2018-09-11 22:50:38,907 [salt.state       :1770][INFO    ][3288] Running state [service.systemctl_reload] at time 22:50:38.907351
2018-09-11 22:50:38,907 [salt.state       :1803][INFO    ][3288] Executing state module.mod_watch for [service.systemctl_reload]
2018-09-11 22:50:38,907 [salt.utils.decorators:613 ][WARNING ][3288] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-11 22:50:38,908 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-09-11 22:50:39,017 [salt.state       :290 ][INFO    ][3288] {'ret': True}
2018-09-11 22:50:39,017 [salt.state       :1941][INFO    ][3288] Completed state [service.systemctl_reload] at time 22:50:39.017613 duration_in_ms=110.26
2018-09-11 22:50:39,018 [salt.state       :1770][INFO    ][3288] Running state [/etc/issue] at time 22:50:39.018028
2018-09-11 22:50:39,018 [salt.state       :1803][INFO    ][3288] Executing state file.managed for [/etc/issue]
2018-09-11 22:50:39,069 [salt.state       :290 ][INFO    ][3288] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorisation from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorisation. Unauthorised access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-09-11 22:50:39,070 [salt.state       :1941][INFO    ][3288] Completed state [/etc/issue] at time 22:50:39.070236 duration_in_ms=52.205
2018-09-11 22:50:39,070 [salt.state       :1770][INFO    ][3288] Running state [/etc/hostname] at time 22:50:39.070756
2018-09-11 22:50:39,071 [salt.state       :1803][INFO    ][3288] Executing state file.managed for [/etc/hostname]
2018-09-11 22:50:39,092 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-09-11 22:50:39,104 [salt.state       :290 ][INFO    ][3288] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb01

2018-09-11 22:50:39,104 [salt.state       :1941][INFO    ][3288] Completed state [/etc/hostname] at time 22:50:39.104761 duration_in_ms=34.006
2018-09-11 22:50:39,107 [salt.state       :1770][INFO    ][3288] Running state [hostname mdb01] at time 22:50:39.107487
2018-09-11 22:50:39,107 [salt.state       :1803][INFO    ][3288] Executing state cmd.run for [hostname mdb01]
2018-09-11 22:50:39,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'test "$(hostname)" = "mdb01"' in directory '/root'
2018-09-11 22:50:39,122 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command 'hostname mdb01' in directory '/root'
2018-09-11 22:50:39,133 [salt.state       :290 ][INFO    ][3288] {'pid': 5197, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-09-11 22:50:39,133 [salt.state       :1941][INFO    ][3288] Completed state [hostname mdb01] at time 22:50:39.133687 duration_in_ms=26.199
2018-09-11 22:50:39,286 [salt.state       :1770][INFO    ][3288] Running state [mdb02] at time 22:50:39.286596
2018-09-11 22:50:39,287 [salt.state       :1803][INFO    ][3288] Executing state host.present for [mdb02]
2018-09-11 22:50:39,289 [salt.state       :290 ][INFO    ][3288] {'host': 'mdb02'}
2018-09-11 22:50:39,290 [salt.state       :1941][INFO    ][3288] Completed state [mdb02] at time 22:50:39.290287 duration_in_ms=3.691
2018-09-11 22:50:39,291 [salt.state       :1770][INFO    ][3288] Running state [mdb02.mcp-ovs-ha.local] at time 22:50:39.290969
2018-09-11 22:50:39,291 [salt.state       :1803][INFO    ][3288] Executing state host.present for [mdb02.mcp-ovs-ha.local]
2018-09-11 22:50:39,501 [salt.state       :290 ][INFO    ][3288] {'host': 'mdb02.mcp-ovs-ha.local'}
2018-09-11 22:50:39,501 [salt.state       :1941][INFO    ][3288] Completed state [mdb02.mcp-ovs-ha.local] at time 22:50:39.501282 duration_in_ms=210.314
2018-09-11 22:50:39,501 [salt.state       :1770][INFO    ][3288] Running state [mdb03] at time 22:50:39.501802
2018-09-11 22:50:39,502 [salt.state       :1803][INFO    ][3288] Executing state host.present for [mdb03]
2018-09-11 22:50:39,610 [salt.state       :290 ][INFO    ][3288] {'host': 'mdb03'}
2018-09-11 22:50:39,610 [salt.state       :1941][INFO    ][3288] Completed state [mdb03] at time 22:50:39.610903 duration_in_ms=109.1
2018-09-11 22:50:39,611 [salt.state       :1770][INFO    ][3288] Running state [mdb03.mcp-ovs-ha.local] at time 22:50:39.611410
2018-09-11 22:50:39,611 [salt.state       :1803][INFO    ][3288] Executing state host.present for [mdb03.mcp-ovs-ha.local]
2018-09-11 22:50:39,616 [salt.state       :290 ][INFO    ][3288] {'host': 'mdb03.mcp-ovs-ha.local'}
2018-09-11 22:50:39,616 [salt.state       :1941][INFO    ][3288] Completed state [mdb03.mcp-ovs-ha.local] at time 22:50:39.616465 duration_in_ms=5.055
2018-09-11 22:50:39,616 [salt.state       :1770][INFO    ][3288] Running state [mdb01] at time 22:50:39.616765
2018-09-11 22:50:39,617 [salt.state       :1803][INFO    ][3288] Executing state host.present for [mdb01]
2018-09-11 22:50:39,622 [salt.state       :290 ][INFO    ][3288] {'host': 'mdb01'}
2018-09-11 22:50:39,622 [salt.state       :1941][INFO    ][3288] Completed state [mdb01] at time 22:50:39.622684 duration_in_ms=5.917
2018-09-11 22:50:39,623 [salt.state       :1770][INFO    ][3288] Running state [mdb01.mcp-ovs-ha.local] at time 22:50:39.623187
2018-09-11 22:50:39,623 [salt.state       :1803][INFO    ][3288] Executing state host.present for [mdb01.mcp-ovs-ha.local]
2018-09-11 22:50:39,628 [salt.state       :290 ][INFO    ][3288] {'host': 'mdb01.mcp-ovs-ha.local'}
2018-09-11 22:50:39,628 [salt.state       :1941][INFO    ][3288] Completed state [mdb01.mcp-ovs-ha.local] at time 22:50:39.628641 duration_in_ms=5.454
2018-09-11 22:50:39,629 [salt.state       :1770][INFO    ][3288] Running state [mdb] at time 22:50:39.629053
2018-09-11 22:50:39,629 [salt.state       :1803][INFO    ][3288] Executing state host.present for [mdb]
2018-09-11 22:50:39,634 [salt.state       :290 ][INFO    ][3288] {'host': 'mdb'}
2018-09-11 22:50:39,634 [salt.state       :1941][INFO    ][3288] Completed state [mdb] at time 22:50:39.634724 duration_in_ms=5.67
2018-09-11 22:50:39,635 [salt.state       :1770][INFO    ][3288] Running state [mdb.mcp-ovs-ha.local] at time 22:50:39.635308
2018-09-11 22:50:39,635 [salt.state       :1803][INFO    ][3288] Executing state host.present for [mdb.mcp-ovs-ha.local]
2018-09-11 22:50:39,640 [salt.state       :290 ][INFO    ][3288] {'host': 'mdb.mcp-ovs-ha.local'}
2018-09-11 22:50:39,640 [salt.state       :1941][INFO    ][3288] Completed state [mdb.mcp-ovs-ha.local] at time 22:50:39.640859 duration_in_ms=5.551
2018-09-11 22:50:39,641 [salt.state       :1770][INFO    ][3288] Running state [cfg01] at time 22:50:39.641480
2018-09-11 22:50:39,641 [salt.state       :1803][INFO    ][3288] Executing state host.present for [cfg01]
2018-09-11 22:50:39,646 [salt.state       :290 ][INFO    ][3288] {'host': 'cfg01'}
2018-09-11 22:50:39,646 [salt.state       :1941][INFO    ][3288] Completed state [cfg01] at time 22:50:39.646802 duration_in_ms=5.322
2018-09-11 22:50:39,647 [salt.state       :1770][INFO    ][3288] Running state [cfg01.mcp-ovs-ha.local] at time 22:50:39.647360
2018-09-11 22:50:39,647 [salt.state       :1803][INFO    ][3288] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-09-11 22:50:39,652 [salt.state       :290 ][INFO    ][3288] {'host': 'cfg01.mcp-ovs-ha.local'}
2018-09-11 22:50:39,652 [salt.state       :1941][INFO    ][3288] Completed state [cfg01.mcp-ovs-ha.local] at time 22:50:39.652776 duration_in_ms=5.416
2018-09-11 22:50:39,653 [salt.state       :1770][INFO    ][3288] Running state [prx01] at time 22:50:39.653295
2018-09-11 22:50:39,653 [salt.state       :1803][INFO    ][3288] Executing state host.present for [prx01]
2018-09-11 22:50:39,658 [salt.state       :290 ][INFO    ][3288] {'host': 'prx01'}
2018-09-11 22:50:39,658 [salt.state       :1941][INFO    ][3288] Completed state [prx01] at time 22:50:39.658724 duration_in_ms=5.429
2018-09-11 22:50:39,659 [salt.state       :1770][INFO    ][3288] Running state [prx01.mcp-ovs-ha.local] at time 22:50:39.659168
2018-09-11 22:50:39,659 [salt.state       :1803][INFO    ][3288] Executing state host.present for [prx01.mcp-ovs-ha.local]
2018-09-11 22:50:39,664 [salt.state       :290 ][INFO    ][3288] {'host': 'prx01.mcp-ovs-ha.local'}
2018-09-11 22:50:39,664 [salt.state       :1941][INFO    ][3288] Completed state [prx01.mcp-ovs-ha.local] at time 22:50:39.664862 duration_in_ms=5.693
2018-09-11 22:50:39,665 [salt.state       :1770][INFO    ][3288] Running state [kvm01] at time 22:50:39.665421
2018-09-11 22:50:39,665 [salt.state       :1803][INFO    ][3288] Executing state host.present for [kvm01]
2018-09-11 22:50:39,670 [salt.state       :290 ][INFO    ][3288] {'host': 'kvm01'}
2018-09-11 22:50:39,670 [salt.state       :1941][INFO    ][3288] Completed state [kvm01] at time 22:50:39.670791 duration_in_ms=5.371
2018-09-11 22:50:39,671 [salt.state       :1770][INFO    ][3288] Running state [kvm01.mcp-ovs-ha.local] at time 22:50:39.671350
2018-09-11 22:50:39,671 [salt.state       :1803][INFO    ][3288] Executing state host.present for [kvm01.mcp-ovs-ha.local]
2018-09-11 22:50:39,676 [salt.state       :290 ][INFO    ][3288] {'host': 'kvm01.mcp-ovs-ha.local'}
2018-09-11 22:50:39,676 [salt.state       :1941][INFO    ][3288] Completed state [kvm01.mcp-ovs-ha.local] at time 22:50:39.676843 duration_in_ms=5.492
2018-09-11 22:50:39,677 [salt.state       :1770][INFO    ][3288] Running state [kvm03] at time 22:50:39.677445
2018-09-11 22:50:39,677 [salt.state       :1803][INFO    ][3288] Executing state host.present for [kvm03]
2018-09-11 22:50:39,682 [salt.state       :290 ][INFO    ][3288] {'host': 'kvm03'}
2018-09-11 22:50:39,682 [salt.state       :1941][INFO    ][3288] Completed state [kvm03] at time 22:50:39.682717 duration_in_ms=5.273
2018-09-11 22:50:39,683 [salt.state       :1770][INFO    ][3288] Running state [kvm03.mcp-ovs-ha.local] at time 22:50:39.683148
2018-09-11 22:50:39,683 [salt.state       :1803][INFO    ][3288] Executing state host.present for [kvm03.mcp-ovs-ha.local]
2018-09-11 22:50:39,688 [salt.state       :290 ][INFO    ][3288] {'host': 'kvm03.mcp-ovs-ha.local'}
2018-09-11 22:50:39,689 [salt.state       :1941][INFO    ][3288] Completed state [kvm03.mcp-ovs-ha.local] at time 22:50:39.689091 duration_in_ms=5.942
2018-09-11 22:50:39,689 [salt.state       :1770][INFO    ][3288] Running state [kvm02] at time 22:50:39.689821
2018-09-11 22:50:39,690 [salt.state       :1803][INFO    ][3288] Executing state host.present for [kvm02]
2018-09-11 22:50:39,718 [salt.state       :290 ][INFO    ][3288] {'host': 'kvm02'}
2018-09-11 22:50:39,718 [salt.state       :1941][INFO    ][3288] Completed state [kvm02] at time 22:50:39.718689 duration_in_ms=28.87
2018-09-11 22:50:39,719 [salt.state       :1770][INFO    ][3288] Running state [kvm02.mcp-ovs-ha.local] at time 22:50:39.719012
2018-09-11 22:50:39,719 [salt.state       :1803][INFO    ][3288] Executing state host.present for [kvm02.mcp-ovs-ha.local]
2018-09-11 22:50:40,140 [salt.state       :290 ][INFO    ][3288] {'host': 'kvm02.mcp-ovs-ha.local'}
2018-09-11 22:50:40,140 [salt.state       :1941][INFO    ][3288] Completed state [kvm02.mcp-ovs-ha.local] at time 22:50:40.140729 duration_in_ms=421.715
2018-09-11 22:50:40,141 [salt.state       :1770][INFO    ][3288] Running state [dbs] at time 22:50:40.141454
2018-09-11 22:50:40,141 [salt.state       :1803][INFO    ][3288] Executing state host.present for [dbs]
2018-09-11 22:50:40,143 [salt.state       :290 ][INFO    ][3288] {'host': 'dbs'}
2018-09-11 22:50:40,144 [salt.state       :1941][INFO    ][3288] Completed state [dbs] at time 22:50:40.144296 duration_in_ms=2.842
2018-09-11 22:50:40,145 [salt.state       :1770][INFO    ][3288] Running state [dbs.mcp-ovs-ha.local] at time 22:50:40.144957
2018-09-11 22:50:40,145 [salt.state       :1803][INFO    ][3288] Executing state host.present for [dbs.mcp-ovs-ha.local]
2018-09-11 22:50:40,149 [salt.state       :290 ][INFO    ][3288] {'host': 'dbs.mcp-ovs-ha.local'}
2018-09-11 22:50:40,149 [salt.state       :1941][INFO    ][3288] Completed state [dbs.mcp-ovs-ha.local] at time 22:50:40.149847 duration_in_ms=4.89
2018-09-11 22:50:40,150 [salt.state       :1770][INFO    ][3288] Running state [prx] at time 22:50:40.150490
2018-09-11 22:50:40,151 [salt.state       :1803][INFO    ][3288] Executing state host.present for [prx]
2018-09-11 22:50:40,155 [salt.state       :290 ][INFO    ][3288] {'host': 'prx'}
2018-09-11 22:50:40,155 [salt.state       :1941][INFO    ][3288] Completed state [prx] at time 22:50:40.155346 duration_in_ms=4.857
2018-09-11 22:50:40,155 [salt.state       :1770][INFO    ][3288] Running state [prx.mcp-ovs-ha.local] at time 22:50:40.155652
2018-09-11 22:50:40,155 [salt.state       :1803][INFO    ][3288] Executing state host.present for [prx.mcp-ovs-ha.local]
2018-09-11 22:50:40,161 [salt.state       :290 ][INFO    ][3288] {'host': 'prx.mcp-ovs-ha.local'}
2018-09-11 22:50:40,161 [salt.state       :1941][INFO    ][3288] Completed state [prx.mcp-ovs-ha.local] at time 22:50:40.161393 duration_in_ms=5.741
2018-09-11 22:50:40,161 [salt.state       :1770][INFO    ][3288] Running state [prx02] at time 22:50:40.161704
2018-09-11 22:50:40,161 [salt.state       :1803][INFO    ][3288] Executing state host.present for [prx02]
2018-09-11 22:50:40,347 [salt.state       :290 ][INFO    ][3288] {'host': 'prx02'}
2018-09-11 22:50:40,347 [salt.state       :1941][INFO    ][3288] Completed state [prx02] at time 22:50:40.347500 duration_in_ms=185.795
2018-09-11 22:50:40,348 [salt.state       :1770][INFO    ][3288] Running state [prx02.mcp-ovs-ha.local] at time 22:50:40.348194
2018-09-11 22:50:40,348 [salt.state       :1803][INFO    ][3288] Executing state host.present for [prx02.mcp-ovs-ha.local]
2018-09-11 22:50:40,352 [salt.state       :290 ][INFO    ][3288] {'host': 'prx02.mcp-ovs-ha.local'}
2018-09-11 22:50:40,353 [salt.state       :1941][INFO    ][3288] Completed state [prx02.mcp-ovs-ha.local] at time 22:50:40.353255 duration_in_ms=5.062
2018-09-11 22:50:40,353 [salt.state       :1770][INFO    ][3288] Running state [msg02] at time 22:50:40.353783
2018-09-11 22:50:40,354 [salt.state       :1803][INFO    ][3288] Executing state host.present for [msg02]
2018-09-11 22:50:40,359 [salt.state       :290 ][INFO    ][3288] {'host': 'msg02'}
2018-09-11 22:50:40,359 [salt.state       :1941][INFO    ][3288] Completed state [msg02] at time 22:50:40.359481 duration_in_ms=5.698
2018-09-11 22:50:40,360 [salt.state       :1770][INFO    ][3288] Running state [msg02.mcp-ovs-ha.local] at time 22:50:40.360232
2018-09-11 22:50:40,360 [salt.state       :1803][INFO    ][3288] Executing state host.present for [msg02.mcp-ovs-ha.local]
2018-09-11 22:50:40,365 [salt.state       :290 ][INFO    ][3288] {'host': 'msg02.mcp-ovs-ha.local'}
2018-09-11 22:50:40,365 [salt.state       :1941][INFO    ][3288] Completed state [msg02.mcp-ovs-ha.local] at time 22:50:40.365640 duration_in_ms=5.408
2018-09-11 22:50:40,366 [salt.state       :1770][INFO    ][3288] Running state [msg03] at time 22:50:40.366351
2018-09-11 22:50:40,366 [salt.state       :1803][INFO    ][3288] Executing state host.present for [msg03]
2018-09-11 22:50:40,461 [salt.state       :290 ][INFO    ][3288] {'host': 'msg03'}
2018-09-11 22:50:40,461 [salt.state       :1941][INFO    ][3288] Completed state [msg03] at time 22:50:40.461443 duration_in_ms=95.092
2018-09-11 22:50:40,462 [salt.state       :1770][INFO    ][3288] Running state [msg03.mcp-ovs-ha.local] at time 22:50:40.461999
2018-09-11 22:50:40,462 [salt.state       :1803][INFO    ][3288] Executing state host.present for [msg03.mcp-ovs-ha.local]
2018-09-11 22:50:40,466 [salt.state       :290 ][INFO    ][3288] {'host': 'msg03.mcp-ovs-ha.local'}
2018-09-11 22:50:40,467 [salt.state       :1941][INFO    ][3288] Completed state [msg03.mcp-ovs-ha.local] at time 22:50:40.466944 duration_in_ms=4.944
2018-09-11 22:50:40,467 [salt.state       :1770][INFO    ][3288] Running state [msg01] at time 22:50:40.467411
2018-09-11 22:50:40,467 [salt.state       :1803][INFO    ][3288] Executing state host.present for [msg01]
2018-09-11 22:50:40,472 [salt.state       :290 ][INFO    ][3288] {'host': 'msg01'}
2018-09-11 22:50:40,473 [salt.state       :1941][INFO    ][3288] Completed state [msg01] at time 22:50:40.473178 duration_in_ms=5.766
2018-09-11 22:50:40,473 [salt.state       :1770][INFO    ][3288] Running state [msg01.mcp-ovs-ha.local] at time 22:50:40.473816
2018-09-11 22:50:40,474 [salt.state       :1803][INFO    ][3288] Executing state host.present for [msg01.mcp-ovs-ha.local]
2018-09-11 22:50:40,478 [salt.state       :290 ][INFO    ][3288] {'host': 'msg01.mcp-ovs-ha.local'}
2018-09-11 22:50:40,479 [salt.state       :1941][INFO    ][3288] Completed state [msg01.mcp-ovs-ha.local] at time 22:50:40.479163 duration_in_ms=5.348
2018-09-11 22:50:40,479 [salt.state       :1770][INFO    ][3288] Running state [msg] at time 22:50:40.479681
2018-09-11 22:50:40,480 [salt.state       :1803][INFO    ][3288] Executing state host.present for [msg]
2018-09-11 22:50:40,484 [salt.state       :290 ][INFO    ][3288] {'host': 'msg'}
2018-09-11 22:50:40,485 [salt.state       :1941][INFO    ][3288] Completed state [msg] at time 22:50:40.484982 duration_in_ms=5.301
2018-09-11 22:50:40,485 [salt.state       :1770][INFO    ][3288] Running state [msg.mcp-ovs-ha.local] at time 22:50:40.485362
2018-09-11 22:50:40,485 [salt.state       :1803][INFO    ][3288] Executing state host.present for [msg.mcp-ovs-ha.local]
2018-09-11 22:50:40,490 [salt.state       :290 ][INFO    ][3288] {'host': 'msg.mcp-ovs-ha.local'}
2018-09-11 22:50:40,491 [salt.state       :1941][INFO    ][3288] Completed state [msg.mcp-ovs-ha.local] at time 22:50:40.491183 duration_in_ms=5.821
2018-09-11 22:50:40,491 [salt.state       :1770][INFO    ][3288] Running state [cfg01] at time 22:50:40.491612
2018-09-11 22:50:40,491 [salt.state       :1803][INFO    ][3288] Executing state host.present for [cfg01]
2018-09-11 22:50:40,492 [salt.state       :290 ][INFO    ][3288] Host cfg01 (10.167.4.11) already present
2018-09-11 22:50:40,492 [salt.state       :1941][INFO    ][3288] Completed state [cfg01] at time 22:50:40.492723 duration_in_ms=1.111
2018-09-11 22:50:40,493 [salt.state       :1770][INFO    ][3288] Running state [cfg01.mcp-ovs-ha.local] at time 22:50:40.493106
2018-09-11 22:50:40,493 [salt.state       :1803][INFO    ][3288] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-09-11 22:50:40,493 [salt.state       :290 ][INFO    ][3288] Host cfg01.mcp-ovs-ha.local (10.167.4.11) already present
2018-09-11 22:50:40,494 [salt.state       :1941][INFO    ][3288] Completed state [cfg01.mcp-ovs-ha.local] at time 22:50:40.494163 duration_in_ms=1.057
2018-09-11 22:50:40,494 [salt.state       :1770][INFO    ][3288] Running state [cmp002] at time 22:50:40.494576
2018-09-11 22:50:40,494 [salt.state       :1803][INFO    ][3288] Executing state host.present for [cmp002]
2018-09-11 22:50:40,496 [salt.state       :290 ][INFO    ][3288] {'host': 'cmp002'}
2018-09-11 22:50:40,497 [salt.state       :1941][INFO    ][3288] Completed state [cmp002] at time 22:50:40.497274 duration_in_ms=2.697
2018-09-11 22:50:40,498 [salt.state       :1770][INFO    ][3288] Running state [cmp002.mcp-ovs-ha.local] at time 22:50:40.497987
2018-09-11 22:50:40,498 [salt.state       :1803][INFO    ][3288] Executing state host.present for [cmp002.mcp-ovs-ha.local]
2018-09-11 22:50:40,865 [salt.state       :290 ][INFO    ][3288] {'host': 'cmp002.mcp-ovs-ha.local'}
2018-09-11 22:50:40,865 [salt.state       :1941][INFO    ][3288] Completed state [cmp002.mcp-ovs-ha.local] at time 22:50:40.865618 duration_in_ms=367.631
2018-09-11 22:50:40,866 [salt.state       :1770][INFO    ][3288] Running state [cmp001] at time 22:50:40.866374
2018-09-11 22:50:40,866 [salt.state       :1803][INFO    ][3288] Executing state host.present for [cmp001]
2018-09-11 22:50:40,869 [salt.state       :290 ][INFO    ][3288] {'host': 'cmp001'}
2018-09-11 22:50:40,869 [salt.state       :1941][INFO    ][3288] Completed state [cmp001] at time 22:50:40.869460 duration_in_ms=3.086
2018-09-11 22:50:40,870 [salt.state       :1770][INFO    ][3288] Running state [cmp001.mcp-ovs-ha.local] at time 22:50:40.870121
2018-09-11 22:50:40,870 [salt.state       :1803][INFO    ][3288] Executing state host.present for [cmp001.mcp-ovs-ha.local]
2018-09-11 22:50:40,874 [salt.state       :290 ][INFO    ][3288] {'host': 'cmp001.mcp-ovs-ha.local'}
2018-09-11 22:50:40,874 [salt.state       :1941][INFO    ][3288] Completed state [cmp001.mcp-ovs-ha.local] at time 22:50:40.874288 duration_in_ms=4.168
2018-09-11 22:50:40,874 [salt.state       :1770][INFO    ][3288] Running state [dbs01] at time 22:50:40.874626
2018-09-11 22:50:40,874 [salt.state       :1803][INFO    ][3288] Executing state host.present for [dbs01]
2018-09-11 22:50:40,880 [salt.state       :290 ][INFO    ][3288] {'host': 'dbs01'}
2018-09-11 22:50:40,880 [salt.state       :1941][INFO    ][3288] Completed state [dbs01] at time 22:50:40.880556 duration_in_ms=5.93
2018-09-11 22:50:40,880 [salt.state       :1770][INFO    ][3288] Running state [dbs01.mcp-ovs-ha.local] at time 22:50:40.880897
2018-09-11 22:50:40,881 [salt.state       :1803][INFO    ][3288] Executing state host.present for [dbs01.mcp-ovs-ha.local]
2018-09-11 22:50:40,886 [salt.state       :290 ][INFO    ][3288] {'host': 'dbs01.mcp-ovs-ha.local'}
2018-09-11 22:50:40,886 [salt.state       :1941][INFO    ][3288] Completed state [dbs01.mcp-ovs-ha.local] at time 22:50:40.886415 duration_in_ms=5.518
2018-09-11 22:50:40,886 [salt.state       :1770][INFO    ][3288] Running state [dbs02] at time 22:50:40.886853
2018-09-11 22:50:40,887 [salt.state       :1803][INFO    ][3288] Executing state host.present for [dbs02]
2018-09-11 22:50:40,892 [salt.state       :290 ][INFO    ][3288] {'host': 'dbs02'}
2018-09-11 22:50:40,892 [salt.state       :1941][INFO    ][3288] Completed state [dbs02] at time 22:50:40.892475 duration_in_ms=5.623
2018-09-11 22:50:40,892 [salt.state       :1770][INFO    ][3288] Running state [dbs02.mcp-ovs-ha.local] at time 22:50:40.892914
2018-09-11 22:50:40,893 [salt.state       :1803][INFO    ][3288] Executing state host.present for [dbs02.mcp-ovs-ha.local]
2018-09-11 22:50:40,898 [salt.state       :290 ][INFO    ][3288] {'host': 'dbs02.mcp-ovs-ha.local'}
2018-09-11 22:50:40,898 [salt.state       :1941][INFO    ][3288] Completed state [dbs02.mcp-ovs-ha.local] at time 22:50:40.898530 duration_in_ms=5.616
2018-09-11 22:50:40,899 [salt.state       :1770][INFO    ][3288] Running state [dbs03] at time 22:50:40.898951
2018-09-11 22:50:40,899 [salt.state       :1803][INFO    ][3288] Executing state host.present for [dbs03]
2018-09-11 22:50:40,910 [salt.state       :290 ][INFO    ][3288] {'host': 'dbs03'}
2018-09-11 22:50:40,910 [salt.state       :1941][INFO    ][3288] Completed state [dbs03] at time 22:50:40.910539 duration_in_ms=11.588
2018-09-11 22:50:40,911 [salt.state       :1770][INFO    ][3288] Running state [dbs03.mcp-ovs-ha.local] at time 22:50:40.911025
2018-09-11 22:50:40,911 [salt.state       :1803][INFO    ][3288] Executing state host.present for [dbs03.mcp-ovs-ha.local]
2018-09-11 22:50:40,940 [salt.state       :290 ][INFO    ][3288] {'host': 'dbs03.mcp-ovs-ha.local'}
2018-09-11 22:50:40,940 [salt.state       :1941][INFO    ][3288] Completed state [dbs03.mcp-ovs-ha.local] at time 22:50:40.940754 duration_in_ms=29.729
2018-09-11 22:50:40,941 [salt.state       :1770][INFO    ][3288] Running state [mas01] at time 22:50:40.941474
2018-09-11 22:50:40,941 [salt.state       :1803][INFO    ][3288] Executing state host.present for [mas01]
2018-09-11 22:50:40,946 [salt.state       :290 ][INFO    ][3288] {'host': 'mas01'}
2018-09-11 22:50:40,946 [salt.state       :1941][INFO    ][3288] Completed state [mas01] at time 22:50:40.946765 duration_in_ms=5.292
2018-09-11 22:50:40,947 [salt.state       :1770][INFO    ][3288] Running state [mas01.mcp-ovs-ha.local] at time 22:50:40.947491
2018-09-11 22:50:40,948 [salt.state       :1803][INFO    ][3288] Executing state host.present for [mas01.mcp-ovs-ha.local]
2018-09-11 22:50:40,952 [salt.state       :290 ][INFO    ][3288] {'host': 'mas01.mcp-ovs-ha.local'}
2018-09-11 22:50:40,952 [salt.state       :1941][INFO    ][3288] Completed state [mas01.mcp-ovs-ha.local] at time 22:50:40.952755 duration_in_ms=5.265
2018-09-11 22:50:40,953 [salt.state       :1770][INFO    ][3288] Running state [ctl02] at time 22:50:40.953518
2018-09-11 22:50:40,954 [salt.state       :1803][INFO    ][3288] Executing state host.present for [ctl02]
2018-09-11 22:50:40,958 [salt.state       :290 ][INFO    ][3288] {'host': 'ctl02'}
2018-09-11 22:50:40,958 [salt.state       :1941][INFO    ][3288] Completed state [ctl02] at time 22:50:40.958643 duration_in_ms=5.126
2018-09-11 22:50:40,959 [salt.state       :1770][INFO    ][3288] Running state [ctl02.mcp-ovs-ha.local] at time 22:50:40.959266
2018-09-11 22:50:40,959 [salt.state       :1803][INFO    ][3288] Executing state host.present for [ctl02.mcp-ovs-ha.local]
2018-09-11 22:50:40,964 [salt.state       :290 ][INFO    ][3288] {'host': 'ctl02.mcp-ovs-ha.local'}
2018-09-11 22:50:40,964 [salt.state       :1941][INFO    ][3288] Completed state [ctl02.mcp-ovs-ha.local] at time 22:50:40.964723 duration_in_ms=5.457
2018-09-11 22:50:40,965 [salt.state       :1770][INFO    ][3288] Running state [ctl03] at time 22:50:40.965434
2018-09-11 22:50:40,965 [salt.state       :1803][INFO    ][3288] Executing state host.present for [ctl03]
2018-09-11 22:50:40,970 [salt.state       :290 ][INFO    ][3288] {'host': 'ctl03'}
2018-09-11 22:50:40,970 [salt.state       :1941][INFO    ][3288] Completed state [ctl03] at time 22:50:40.970774 duration_in_ms=5.34
2018-09-11 22:50:40,971 [salt.state       :1770][INFO    ][3288] Running state [ctl03.mcp-ovs-ha.local] at time 22:50:40.971506
2018-09-11 22:50:40,972 [salt.state       :1803][INFO    ][3288] Executing state host.present for [ctl03.mcp-ovs-ha.local]
2018-09-11 22:50:40,976 [salt.state       :290 ][INFO    ][3288] {'host': 'ctl03.mcp-ovs-ha.local'}
2018-09-11 22:50:40,976 [salt.state       :1941][INFO    ][3288] Completed state [ctl03.mcp-ovs-ha.local] at time 22:50:40.976789 duration_in_ms=5.283
2018-09-11 22:50:40,977 [salt.state       :1770][INFO    ][3288] Running state [ctl01] at time 22:50:40.977546
2018-09-11 22:50:40,978 [salt.state       :1803][INFO    ][3288] Executing state host.present for [ctl01]
2018-09-11 22:50:40,982 [salt.state       :290 ][INFO    ][3288] {'host': 'ctl01'}
2018-09-11 22:50:40,982 [salt.state       :1941][INFO    ][3288] Completed state [ctl01] at time 22:50:40.982772 duration_in_ms=5.226
2018-09-11 22:50:40,983 [salt.state       :1770][INFO    ][3288] Running state [ctl01.mcp-ovs-ha.local] at time 22:50:40.983516
2018-09-11 22:50:40,984 [salt.state       :1803][INFO    ][3288] Executing state host.present for [ctl01.mcp-ovs-ha.local]
2018-09-11 22:50:41,146 [salt.state       :290 ][INFO    ][3288] {'host': 'ctl01.mcp-ovs-ha.local'}
2018-09-11 22:50:41,146 [salt.state       :1941][INFO    ][3288] Completed state [ctl01.mcp-ovs-ha.local] at time 22:50:41.146359 duration_in_ms=162.844
2018-09-11 22:50:41,146 [salt.state       :1770][INFO    ][3288] Running state [ctl] at time 22:50:41.146708
2018-09-11 22:50:41,146 [salt.state       :1803][INFO    ][3288] Executing state host.present for [ctl]
2018-09-11 22:50:41,149 [salt.state       :290 ][INFO    ][3288] {'host': 'ctl'}
2018-09-11 22:50:41,150 [salt.state       :1941][INFO    ][3288] Completed state [ctl] at time 22:50:41.149992 duration_in_ms=3.283
2018-09-11 22:50:41,150 [salt.state       :1770][INFO    ][3288] Running state [ctl.mcp-ovs-ha.local] at time 22:50:41.150629
2018-09-11 22:50:41,151 [salt.state       :1803][INFO    ][3288] Executing state host.present for [ctl.mcp-ovs-ha.local]
2018-09-11 22:50:41,155 [salt.state       :290 ][INFO    ][3288] {'host': 'ctl.mcp-ovs-ha.local'}
2018-09-11 22:50:41,156 [salt.state       :1941][INFO    ][3288] Completed state [ctl.mcp-ovs-ha.local] at time 22:50:41.156041 duration_in_ms=5.412
2018-09-11 22:50:41,156 [salt.state       :1770][INFO    ][3288] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 22:50:41.156564
2018-09-11 22:50:41,157 [salt.state       :1803][INFO    ][3288] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-09-11 22:50:41,157 [salt.state       :290 ][INFO    ][3288] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-09-11 22:50:41,158 [salt.state       :1941][INFO    ][3288] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 22:50:41.158134 duration_in_ms=1.572
2018-09-11 22:50:41,166 [salt.state       :1770][INFO    ][3288] Running state [ens3] at time 22:50:41.166164
2018-09-11 22:50:41,166 [salt.state       :1803][INFO    ][3288] Executing state network.managed for [ens3]
2018-09-11 22:50:41,305 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['ifup', 'ens3'] in directory '/root'
2018-09-11 22:50:42,030 [salt.state       :290 ][INFO    ][3288] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-09-11 22:50:42,031 [salt.state       :1941][INFO    ][3288] Completed state [ens3] at time 22:50:42.031083 duration_in_ms=864.919
2018-09-11 22:50:42,031 [salt.state       :1770][INFO    ][3288] Running state [ens2] at time 22:50:42.031318
2018-09-11 22:50:42,031 [salt.state       :1803][INFO    ][3288] Executing state network.managed for [ens2]
2018-09-11 22:50:42,055 [salt.state       :290 ][INFO    ][3288] {'interface': 'Added network interface.'}
2018-09-11 22:50:42,056 [salt.state       :1941][INFO    ][3288] Completed state [ens2] at time 22:50:42.056336 duration_in_ms=25.018
2018-09-11 22:50:42,056 [salt.state       :1770][INFO    ][3288] Running state [linux_system_network] at time 22:50:42.056676
2018-09-11 22:50:42,057 [salt.state       :1803][INFO    ][3288] Executing state network.system for [linux_system_network]
2018-09-11 22:50:42,057 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-09-11 22:50:42,072 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-09-11 22:50:42,313 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-09-11 22:50:42,331 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-09-11 22:50:42,973 [salt.loaded.int.module.debian_ip:1970][WARNING ][3288] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-09-11 22:50:43,232 [salt.state       :290 ][INFO    ][3288] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb01\n\n+DOMAIN=mcp-ovs-ha.local\n\n+SEARCH=maas\n'}
2018-09-11 22:50:43,233 [salt.state       :1941][INFO    ][3288] Completed state [linux_system_network] at time 22:50:43.233298 duration_in_ms=1176.621
2018-09-11 22:50:43,234 [salt.state       :1770][INFO    ][3288] Running state [/etc/profile.d/proxy.sh] at time 22:50:43.234182
2018-09-11 22:50:43,234 [salt.state       :1803][INFO    ][3288] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-09-11 22:50:43,236 [salt.state       :290 ][INFO    ][3288] File /etc/profile.d/proxy.sh is not present
2018-09-11 22:50:43,236 [salt.state       :1941][INFO    ][3288] Completed state [/etc/profile.d/proxy.sh] at time 22:50:43.236655 duration_in_ms=2.473
2018-09-11 22:50:43,237 [salt.state       :1770][INFO    ][3288] Running state [/etc/apt/apt.conf.d/95proxies] at time 22:50:43.237158
2018-09-11 22:50:43,237 [salt.state       :1803][INFO    ][3288] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-09-11 22:50:43,238 [salt.state       :290 ][INFO    ][3288] File /etc/apt/apt.conf.d/95proxies is not present
2018-09-11 22:50:43,238 [salt.state       :1941][INFO    ][3288] Completed state [/etc/apt/apt.conf.d/95proxies] at time 22:50:43.238763 duration_in_ms=1.604
2018-09-11 22:50:43,243 [salt.state       :1770][INFO    ][3288] Running state [ntp] at time 22:50:43.243409
2018-09-11 22:50:43,244 [salt.state       :1803][INFO    ][3288] Executing state pkg.installed for [ntp]
2018-09-11 22:50:43,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-11 22:50:43,461 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-09-11 22:50:48,691 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225048682380
2018-09-11 22:50:48,711 [salt.minion      :1431][INFO    ][6029] Starting a new job with PID 6029
2018-09-11 22:50:48,730 [salt.minion      :1708][INFO    ][6029] Returning information for job: 20180911225048682380
2018-09-11 22:50:57,559 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 22:50:57,595 [salt.state       :290 ][INFO    ][3288] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-09-11 22:50:57,608 [salt.state       :905 ][INFO    ][3288] Loading fresh modules for state activity
2018-09-11 22:50:57,630 [salt.state       :1941][INFO    ][3288] Completed state [ntp] at time 22:50:57.630423 duration_in_ms=14387.015
2018-09-11 22:50:57,633 [salt.state       :1770][INFO    ][3288] Running state [/etc/ntp.conf] at time 22:50:57.633865
2018-09-11 22:50:57,634 [salt.state       :1803][INFO    ][3288] Executing state file.managed for [/etc/ntp.conf]
2018-09-11 22:50:57,654 [salt.fileclient  :1215][INFO    ][3288] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-09-11 22:50:57,702 [salt.state       :290 ][INFO    ][3288] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.pool.ntp.org iburst
+server 0.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-09-11 22:50:57,703 [salt.state       :1941][INFO    ][3288] Completed state [/etc/ntp.conf] at time 22:50:57.703258 duration_in_ms=69.392
2018-09-11 22:50:58,005 [salt.state       :1770][INFO    ][3288] Running state [ntp] at time 22:50:58.005013
2018-09-11 22:50:58,005 [salt.state       :1803][INFO    ][3288] Executing state service.running for [ntp]
2018-09-11 22:50:58,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-09-11 22:50:58,018 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-09-11 22:50:58,029 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-09-11 22:50:58,040 [salt.state       :290 ][INFO    ][3288] The service ntp is already running
2018-09-11 22:50:58,041 [salt.state       :1941][INFO    ][3288] Completed state [ntp] at time 22:50:58.040936 duration_in_ms=35.925
2018-09-11 22:50:58,041 [salt.state       :1770][INFO    ][3288] Running state [ntp] at time 22:50:58.041155
2018-09-11 22:50:58,041 [salt.state       :1803][INFO    ][3288] Executing state service.mod_watch for [ntp]
2018-09-11 22:50:58,042 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-09-11 22:50:58,053 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3288] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-09-11 22:50:58,104 [salt.state       :290 ][INFO    ][3288] {'ntp': True}
2018-09-11 22:50:58,105 [salt.state       :1941][INFO    ][3288] Completed state [ntp] at time 22:50:58.105397 duration_in_ms=64.242
2018-09-11 22:50:58,109 [salt.minion      :1708][INFO    ][3288] Returning information for job: 20180911224953046358
2018-09-11 22:51:16,373 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20180911225116360862
2018-09-11 22:51:16,395 [salt.minion      :1431][INFO    ][6358] Starting a new job with PID 6358
2018-09-11 22:51:16,415 [salt.minion      :1708][INFO    ][6358] Returning information for job: 20180911225116360862
2018-09-11 22:51:59,326 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command pkg.upgrade with jid 20180911225159315688
2018-09-11 22:51:59,349 [salt.minion      :1431][INFO    ][6363] Starting a new job with PID 6363
2018-09-11 22:51:59,371 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6363] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 22:51:59,802 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6363] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-09-11 22:52:04,444 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225204421815
2018-09-11 22:52:04,712 [salt.minion      :1431][INFO    ][6392] Starting a new job with PID 6392
2018-09-11 22:52:04,729 [salt.minion      :1708][INFO    ][6392] Returning information for job: 20180911225204421815
2018-09-11 22:52:14,658 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225214641540
2018-09-11 22:52:14,681 [salt.minion      :1431][INFO    ][6429] Starting a new job with PID 6429
2018-09-11 22:52:14,784 [salt.minion      :1708][INFO    ][6429] Returning information for job: 20180911225214641540
2018-09-11 22:52:24,812 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225224796539
2018-09-11 22:52:24,839 [salt.minion      :1431][INFO    ][6482] Starting a new job with PID 6482
2018-09-11 22:52:24,862 [salt.minion      :1708][INFO    ][6482] Returning information for job: 20180911225224796539
2018-09-11 22:52:34,978 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225234962121
2018-09-11 22:52:35,004 [salt.minion      :1431][INFO    ][6509] Starting a new job with PID 6509
2018-09-11 22:52:35,130 [salt.minion      :1708][INFO    ][6509] Returning information for job: 20180911225234962121
2018-09-11 22:52:45,095 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225245080087
2018-09-11 22:52:45,117 [salt.minion      :1431][INFO    ][6523] Starting a new job with PID 6523
2018-09-11 22:52:45,135 [salt.minion      :1708][INFO    ][6523] Returning information for job: 20180911225245080087
2018-09-11 22:52:55,305 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225255291633
2018-09-11 22:52:55,327 [salt.minion      :1431][INFO    ][6557] Starting a new job with PID 6557
2018-09-11 22:52:55,343 [salt.minion      :1708][INFO    ][6557] Returning information for job: 20180911225255291633
2018-09-11 22:53:05,391 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225305375329
2018-09-11 22:53:05,416 [salt.minion      :1431][INFO    ][6562] Starting a new job with PID 6562
2018-09-11 22:53:05,433 [salt.minion      :1708][INFO    ][6562] Returning information for job: 20180911225305375329
2018-09-11 22:53:15,417 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225315404328
2018-09-11 22:53:15,438 [salt.minion      :1431][INFO    ][6567] Starting a new job with PID 6567
2018-09-11 22:53:15,454 [salt.minion      :1708][INFO    ][6567] Returning information for job: 20180911225315404328
2018-09-11 22:53:25,614 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225325599849
2018-09-11 22:53:25,639 [salt.minion      :1431][INFO    ][6692] Starting a new job with PID 6692
2018-09-11 22:53:25,727 [salt.minion      :1708][INFO    ][6692] Returning information for job: 20180911225325599849
2018-09-11 22:53:35,802 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225335785308
2018-09-11 22:53:35,822 [salt.minion      :1431][INFO    ][6709] Starting a new job with PID 6709
2018-09-11 22:53:35,837 [salt.minion      :1708][INFO    ][6709] Returning information for job: 20180911225335785308
2018-09-11 22:53:45,823 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225345803853
2018-09-11 22:53:45,846 [salt.minion      :1431][INFO    ][6714] Starting a new job with PID 6714
2018-09-11 22:53:45,861 [salt.minion      :1708][INFO    ][6714] Returning information for job: 20180911225345803853
2018-09-11 22:53:55,847 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225355830060
2018-09-11 22:53:55,878 [salt.minion      :1431][INFO    ][6719] Starting a new job with PID 6719
2018-09-11 22:53:55,892 [salt.minion      :1708][INFO    ][6719] Returning information for job: 20180911225355830060
2018-09-11 22:54:06,005 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225405988429
2018-09-11 22:54:06,028 [salt.minion      :1431][INFO    ][6724] Starting a new job with PID 6724
2018-09-11 22:54:06,043 [salt.minion      :1708][INFO    ][6724] Returning information for job: 20180911225405988429
2018-09-11 22:54:16,050 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225416031021
2018-09-11 22:54:16,077 [salt.minion      :1431][INFO    ][6729] Starting a new job with PID 6729
2018-09-11 22:54:16,093 [salt.minion      :1708][INFO    ][6729] Returning information for job: 20180911225416031021
2018-09-11 22:54:26,120 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225426102119
2018-09-11 22:54:26,139 [salt.minion      :1431][INFO    ][6734] Starting a new job with PID 6734
2018-09-11 22:54:26,157 [salt.minion      :1708][INFO    ][6734] Returning information for job: 20180911225426102119
2018-09-11 22:54:36,231 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225436210413
2018-09-11 22:54:36,649 [salt.minion      :1431][INFO    ][6748] Starting a new job with PID 6748
2018-09-11 22:54:36,748 [salt.minion      :1708][INFO    ][6748] Returning information for job: 20180911225436210413
2018-09-11 22:54:46,453 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225446434677
2018-09-11 22:54:51,654 [salt.minion      :1431][INFO    ][6771] Starting a new job with PID 6771
2018-09-11 22:54:51,670 [salt.minion      :1708][INFO    ][6771] Returning information for job: 20180911225446434677
2018-09-11 22:54:56,561 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225456544534
2018-09-11 22:54:56,583 [salt.minion      :1431][INFO    ][6776] Starting a new job with PID 6776
2018-09-11 22:54:56,599 [salt.minion      :1708][INFO    ][6776] Returning information for job: 20180911225456544534
2018-09-11 22:55:06,607 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225506591487
2018-09-11 22:55:06,624 [salt.minion      :1431][INFO    ][6781] Starting a new job with PID 6781
2018-09-11 22:55:06,640 [salt.minion      :1708][INFO    ][6781] Returning information for job: 20180911225506591487
2018-09-11 22:55:16,720 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225516705466
2018-09-11 22:55:16,741 [salt.minion      :1431][INFO    ][6786] Starting a new job with PID 6786
2018-09-11 22:55:16,759 [salt.minion      :1708][INFO    ][6786] Returning information for job: 20180911225516705466
2018-09-11 22:55:26,810 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225526794659
2018-09-11 22:55:26,835 [salt.minion      :1431][INFO    ][6791] Starting a new job with PID 6791
2018-09-11 22:55:26,851 [salt.minion      :1708][INFO    ][6791] Returning information for job: 20180911225526794659
2018-09-11 22:55:36,906 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225536893333
2018-09-11 22:55:36,930 [salt.minion      :1431][INFO    ][6796] Starting a new job with PID 6796
2018-09-11 22:55:36,945 [salt.minion      :1708][INFO    ][6796] Returning information for job: 20180911225536893333
2018-09-11 22:55:47,083 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225547069780
2018-09-11 22:55:47,106 [salt.minion      :1431][INFO    ][6801] Starting a new job with PID 6801
2018-09-11 22:55:47,128 [salt.minion      :1708][INFO    ][6801] Returning information for job: 20180911225547069780
2018-09-11 22:55:57,163 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225557149683
2018-09-11 22:55:57,183 [salt.minion      :1431][INFO    ][6827] Starting a new job with PID 6827
2018-09-11 22:55:57,197 [salt.minion      :1708][INFO    ][6827] Returning information for job: 20180911225557149683
2018-09-11 22:56:07,197 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225607183441
2018-09-11 22:56:07,388 [salt.minion      :1431][INFO    ][6839] Starting a new job with PID 6839
2018-09-11 22:56:07,405 [salt.minion      :1708][INFO    ][6839] Returning information for job: 20180911225607183441
2018-09-11 22:56:17,347 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225617332834
2018-09-11 22:56:17,369 [salt.minion      :1431][INFO    ][6877] Starting a new job with PID 6877
2018-09-11 22:56:17,384 [salt.minion      :1708][INFO    ][6877] Returning information for job: 20180911225617332834
2018-09-11 22:56:27,377 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225627363924
2018-09-11 22:56:27,406 [salt.minion      :1431][INFO    ][6912] Starting a new job with PID 6912
2018-09-11 22:56:27,426 [salt.minion      :1708][INFO    ][6912] Returning information for job: 20180911225627363924
2018-09-11 22:56:37,507 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225637496371
2018-09-11 22:56:37,531 [salt.minion      :1431][INFO    ][6964] Starting a new job with PID 6964
2018-09-11 22:56:37,555 [salt.minion      :1708][INFO    ][6964] Returning information for job: 20180911225637496371
2018-09-11 22:56:47,711 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225647699834
2018-09-11 22:56:47,736 [salt.minion      :1431][INFO    ][7019] Starting a new job with PID 7019
2018-09-11 22:56:47,758 [salt.minion      :1708][INFO    ][7019] Returning information for job: 20180911225647699834
2018-09-11 22:56:57,858 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225657847185
2018-09-11 22:56:57,885 [salt.minion      :1431][INFO    ][7079] Starting a new job with PID 7079
2018-09-11 22:56:58,000 [salt.minion      :1708][INFO    ][7079] Returning information for job: 20180911225657847185
2018-09-11 22:57:08,030 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225708018379
2018-09-11 22:57:08,054 [salt.minion      :1431][INFO    ][7148] Starting a new job with PID 7148
2018-09-11 22:57:08,164 [salt.minion      :1708][INFO    ][7148] Returning information for job: 20180911225708018379
2018-09-11 22:57:18,067 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225718056812
2018-09-11 22:57:18,090 [salt.minion      :1431][INFO    ][7181] Starting a new job with PID 7181
2018-09-11 22:57:18,106 [salt.minion      :1708][INFO    ][7181] Returning information for job: 20180911225718056812
2018-09-11 22:57:28,207 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225728196013
2018-09-11 22:57:28,224 [salt.minion      :1431][INFO    ][7258] Starting a new job with PID 7258
2018-09-11 22:57:28,244 [salt.minion      :1708][INFO    ][7258] Returning information for job: 20180911225728196013
2018-09-11 22:57:38,423 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225738412564
2018-09-11 22:57:38,447 [salt.minion      :1431][INFO    ][7812] Starting a new job with PID 7812
2018-09-11 22:57:38,464 [salt.minion      :1708][INFO    ][7812] Returning information for job: 20180911225738412564
2018-09-11 22:57:48,620 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225748610861
2018-09-11 22:57:48,638 [salt.minion      :1431][INFO    ][7869] Starting a new job with PID 7869
2018-09-11 22:57:48,654 [salt.minion      :1708][INFO    ][7869] Returning information for job: 20180911225748610861
2018-09-11 22:57:58,827 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225758818215
2018-09-11 22:57:58,853 [salt.minion      :1431][INFO    ][9727] Starting a new job with PID 9727
2018-09-11 22:57:58,867 [salt.minion      :1708][INFO    ][9727] Returning information for job: 20180911225758818215
2018-09-11 22:58:09,019 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225809010787
2018-09-11 22:58:09,039 [salt.minion      :1431][INFO    ][12075] Starting a new job with PID 12075
2018-09-11 22:58:09,057 [salt.minion      :1708][INFO    ][12075] Returning information for job: 20180911225809010787
2018-09-11 22:58:19,091 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225819082561
2018-09-11 22:58:19,115 [salt.minion      :1431][INFO    ][13783] Starting a new job with PID 13783
2018-09-11 22:58:19,265 [salt.minion      :1708][INFO    ][13783] Returning information for job: 20180911225819082561
2018-09-11 22:58:29,231 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225829222602
2018-09-11 22:58:29,258 [salt.minion      :1431][INFO    ][13952] Starting a new job with PID 13952
2018-09-11 22:58:29,397 [salt.minion      :1708][INFO    ][13952] Returning information for job: 20180911225829222602
2018-09-11 22:58:39,285 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225839274803
2018-09-11 22:58:39,309 [salt.minion      :1431][INFO    ][15124] Starting a new job with PID 15124
2018-09-11 22:58:39,326 [salt.minion      :1708][INFO    ][15124] Returning information for job: 20180911225839274803
2018-09-11 22:58:49,435 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225849427709
2018-09-11 22:58:49,462 [salt.minion      :1431][INFO    ][15908] Starting a new job with PID 15908
2018-09-11 22:58:49,478 [salt.minion      :1708][INFO    ][15908] Returning information for job: 20180911225849427709
2018-09-11 22:58:59,660 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225859650023
2018-09-11 22:58:59,684 [salt.minion      :1431][INFO    ][16634] Starting a new job with PID 16634
2018-09-11 22:58:59,700 [salt.minion      :1708][INFO    ][16634] Returning information for job: 20180911225859650023
2018-09-11 22:59:09,795 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225909783539
2018-09-11 22:59:09,821 [salt.minion      :1431][INFO    ][18227] Starting a new job with PID 18227
2018-09-11 22:59:09,839 [salt.minion      :1708][INFO    ][18227] Returning information for job: 20180911225909783539
2018-09-11 22:59:19,897 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225919885294
2018-09-11 22:59:19,923 [salt.minion      :1431][INFO    ][18582] Starting a new job with PID 18582
2018-09-11 22:59:19,939 [salt.minion      :1708][INFO    ][18582] Returning information for job: 20180911225919885294
2018-09-11 22:59:30,069 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225930056659
2018-09-11 22:59:30,098 [salt.minion      :1431][INFO    ][21416] Starting a new job with PID 21416
2018-09-11 22:59:30,114 [salt.minion      :1708][INFO    ][21416] Returning information for job: 20180911225930056659
2018-09-11 22:59:40,282 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225940268449
2018-09-11 22:59:40,306 [salt.minion      :1431][INFO    ][21444] Starting a new job with PID 21444
2018-09-11 22:59:40,324 [salt.minion      :1708][INFO    ][21444] Returning information for job: 20180911225940268449
2018-09-11 22:59:50,387 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911225950372012
2018-09-11 22:59:50,414 [salt.minion      :1431][INFO    ][28911] Starting a new job with PID 28911
2018-09-11 22:59:50,432 [salt.minion      :1708][INFO    ][28911] Returning information for job: 20180911225950372012
2018-09-11 23:00:00,533 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911230000517155
2018-09-11 23:00:00,554 [salt.minion      :1431][INFO    ][30906] Starting a new job with PID 30906
2018-09-11 23:00:00,572 [salt.minion      :1708][INFO    ][30906] Returning information for job: 20180911230000517155
2018-09-11 23:00:01,321 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6363] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:00:01,357 [salt.minion      :1708][INFO    ][6363] Returning information for job: 20180911225159315688
2018-09-11 23:01:15,586 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command test.ping with jid 20180911230115575019
2018-09-11 23:01:15,611 [salt.minion      :1431][INFO    ][30973] Starting a new job with PID 30973
2018-09-11 23:01:15,635 [salt.minion      :1708][INFO    ][30973] Returning information for job: 20180911230115575019
2018-09-11 23:02:47,528 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command state.sls with jid 20180911230247512015
2018-09-11 23:02:47,548 [salt.minion      :1431][INFO    ][30988] Starting a new job with PID 30988
2018-09-11 23:02:51,212 [salt.state       :905 ][INFO    ][30988] Loading fresh modules for state activity
2018-09-11 23:02:51,253 [salt.fileclient  :1215][INFO    ][30988] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-09-11 23:02:51,280 [salt.fileclient  :1215][INFO    ][30988] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-09-11 23:02:51,845 [salt.state       :1770][INFO    ][30988] Running state [keepalived] at time 23:02:51.845401
2018-09-11 23:02:51,846 [salt.state       :1803][INFO    ][30988] Executing state pkg.installed for [keepalived]
2018-09-11 23:02:51,846 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:02:52,210 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-09-11 23:02:52,326 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-11 23:02:52,584 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911230252566660
2018-09-11 23:02:52,604 [salt.minion      :1431][INFO    ][31083] Starting a new job with PID 31083
2018-09-11 23:02:52,619 [salt.minion      :1708][INFO    ][31083] Returning information for job: 20180911230252566660
2018-09-11 23:02:54,091 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-11 23:02:54,114 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-09-11 23:03:02,725 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911230302709402
2018-09-11 23:03:02,745 [salt.minion      :1431][INFO    ][32254] Starting a new job with PID 32254
2018-09-11 23:03:02,759 [salt.minion      :1708][INFO    ][32254] Returning information for job: 20180911230302709402
2018-09-11 23:03:02,779 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:03:02,818 [salt.state       :290 ][INFO    ][30988] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-09-11 23:03:02,834 [salt.state       :905 ][INFO    ][30988] Loading fresh modules for state activity
2018-09-11 23:03:02,865 [salt.state       :1941][INFO    ][30988] Completed state [keepalived] at time 23:03:02.865185 duration_in_ms=11019.782
2018-09-11 23:03:02,874 [salt.state       :1770][INFO    ][30988] Running state [lsof] at time 23:03:02.874173
2018-09-11 23:03:02,874 [salt.state       :1803][INFO    ][30988] Executing state pkg.installed for [lsof]
2018-09-11 23:03:03,362 [salt.state       :290 ][INFO    ][30988] All specified packages are already installed
2018-09-11 23:03:03,362 [salt.state       :1941][INFO    ][30988] Completed state [lsof] at time 23:03:03.362402 duration_in_ms=488.228
2018-09-11 23:03:03,365 [salt.state       :1770][INFO    ][30988] Running state [/etc/keepalived/keepalived.conf] at time 23:03:03.365269
2018-09-11 23:03:03,365 [salt.state       :1803][INFO    ][30988] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-09-11 23:03:03,388 [salt.fileclient  :1215][INFO    ][30988] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-09-11 23:03:03,424 [salt.state       :290 ][INFO    ][30988] File changed:
New file
2018-09-11 23:03:03,424 [salt.state       :1941][INFO    ][30988] Completed state [/etc/keepalived/keepalived.conf] at time 23:03:03.424717 duration_in_ms=59.448
2018-09-11 23:03:03,425 [salt.state       :1770][INFO    ][30988] Running state [keepalived] at time 23:03:03.425469
2018-09-11 23:03:03,425 [salt.state       :1803][INFO    ][30988] Executing state service.running for [keepalived]
2018-09-11 23:03:03,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-09-11 23:03:03,451 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-09-11 23:03:03,470 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-09-11 23:03:03,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-09-11 23:03:03,577 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-09-11 23:03:03,593 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-09-11 23:03:03,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30988] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-09-11 23:03:03,625 [salt.state       :290 ][INFO    ][30988] {'keepalived': True}
2018-09-11 23:03:03,625 [salt.state       :1941][INFO    ][30988] Completed state [keepalived] at time 23:03:03.625438 duration_in_ms=199.968
2018-09-11 23:03:03,626 [salt.minion      :1708][INFO    ][30988] Returning information for job: 20180911230247512015
2018-09-11 23:05:34,770 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command pillar.get with jid 20180911230534756429
2018-09-11 23:05:34,804 [salt.minion      :1431][INFO    ][32354] Starting a new job with PID 32354
2018-09-11 23:05:34,809 [salt.minion      :1708][INFO    ][32354] Returning information for job: 20180911230534756429
2018-09-11 23:18:38,780 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command state.sls with jid 20180911231838763085
2018-09-11 23:18:38,809 [salt.minion      :1431][INFO    ][32398] Starting a new job with PID 32398
2018-09-11 23:18:42,506 [salt.state       :905 ][INFO    ][32398] Loading fresh modules for state activity
2018-09-11 23:18:43,008 [salt.fileclient  :1215][INFO    ][32398] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-09-11 23:18:43,030 [salt.fileclient  :1215][INFO    ][32398] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-09-11 23:18:43,050 [salt.fileclient  :1215][INFO    ][32398] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-09-11 23:18:43,605 [salt.state       :1770][INFO    ][32398] Running state [memcached] at time 23:18:43.605534
2018-09-11 23:18:43,605 [salt.state       :1803][INFO    ][32398] Executing state pkg.installed for [memcached]
2018-09-11 23:18:43,606 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:18:43,891 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911231843871742
2018-09-11 23:18:43,920 [salt.minion      :1431][INFO    ][32414] Starting a new job with PID 32414
2018-09-11 23:18:43,933 [salt.minion      :1708][INFO    ][32414] Returning information for job: 20180911231843871742
2018-09-11 23:18:43,968 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-09-11 23:18:44,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-11 23:18:45,821 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-11 23:18:45,845 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-09-11 23:18:51,264 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:18:51,296 [salt.state       :290 ][INFO    ][32398] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-09-11 23:18:51,311 [salt.state       :905 ][INFO    ][32398] Loading fresh modules for state activity
2018-09-11 23:18:51,336 [salt.state       :1941][INFO    ][32398] Completed state [memcached] at time 23:18:51.336706 duration_in_ms=7731.172
2018-09-11 23:18:51,344 [salt.state       :1770][INFO    ][32398] Running state [python-memcache] at time 23:18:51.344891
2018-09-11 23:18:51,345 [salt.state       :1803][INFO    ][32398] Executing state pkg.installed for [python-memcache]
2018-09-11 23:18:51,867 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-11 23:18:51,888 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-09-11 23:18:53,963 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911231853943352
2018-09-11 23:18:53,984 [salt.minion      :1431][INFO    ][835] Starting a new job with PID 835
2018-09-11 23:18:54,001 [salt.minion      :1708][INFO    ][835] Returning information for job: 20180911231853943352
2018-09-11 23:18:54,201 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:18:54,243 [salt.state       :290 ][INFO    ][32398] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-09-11 23:18:54,257 [salt.state       :905 ][INFO    ][32398] Loading fresh modules for state activity
2018-09-11 23:18:54,296 [salt.state       :1941][INFO    ][32398] Completed state [python-memcache] at time 23:18:54.296597 duration_in_ms=2951.706
2018-09-11 23:18:54,300 [salt.state       :1770][INFO    ][32398] Running state [/etc/memcached.conf] at time 23:18:54.300504
2018-09-11 23:18:54,300 [salt.state       :1803][INFO    ][32398] Executing state file.managed for [/etc/memcached.conf]
2018-09-11 23:18:54,322 [salt.fileclient  :1215][INFO    ][32398] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-09-11 23:18:54,346 [salt.state       :290 ][INFO    ][32398] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-09-11 23:18:54,346 [salt.state       :1941][INFO    ][32398] Completed state [/etc/memcached.conf] at time 23:18:54.346421 duration_in_ms=45.916
2018-09-11 23:18:54,705 [salt.state       :1770][INFO    ][32398] Running state [memcached] at time 23:18:54.705682
2018-09-11 23:18:54,706 [salt.state       :1803][INFO    ][32398] Executing state service.running for [memcached]
2018-09-11 23:18:54,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-09-11 23:18:54,723 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-09-11 23:18:54,739 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-09-11 23:18:54,756 [salt.state       :290 ][INFO    ][32398] The service memcached is already running
2018-09-11 23:18:54,756 [salt.state       :1941][INFO    ][32398] Completed state [memcached] at time 23:18:54.756662 duration_in_ms=50.98
2018-09-11 23:18:54,757 [salt.state       :1770][INFO    ][32398] Running state [memcached] at time 23:18:54.757013
2018-09-11 23:18:54,757 [salt.state       :1803][INFO    ][32398] Executing state service.mod_watch for [memcached]
2018-09-11 23:18:54,758 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-09-11 23:18:54,774 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32398] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-09-11 23:18:54,800 [salt.state       :290 ][INFO    ][32398] {'memcached': True}
2018-09-11 23:18:54,800 [salt.state       :1941][INFO    ][32398] Completed state [memcached] at time 23:18:54.800602 duration_in_ms=43.589
2018-09-11 23:18:54,804 [salt.minion      :1708][INFO    ][32398] Returning information for job: 20180911231838763085
2018-09-11 23:18:55,797 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command state.sls with jid 20180911231855776958
2018-09-11 23:18:55,819 [salt.minion      :1431][INFO    ][935] Starting a new job with PID 935
2018-09-11 23:18:56,373 [salt.state       :905 ][INFO    ][935] Loading fresh modules for state activity
2018-09-11 23:18:57,448 [salt.fileclient  :1215][INFO    ][935] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-09-11 23:18:57,473 [salt.fileclient  :1215][INFO    ][935] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-09-11 23:18:58,060 [salt.state       :1770][INFO    ][935] Running state [haproxy] at time 23:18:58.060835
2018-09-11 23:18:58,061 [salt.state       :1803][INFO    ][935] Executing state pkg.installed for [haproxy]
2018-09-11 23:18:58,061 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:18:58,405 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-09-11 23:18:58,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-11 23:19:00,193 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-11 23:19:00,216 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-09-11 23:19:00,877 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911231900860658
2018-09-11 23:19:00,895 [salt.minion      :1431][INFO    ][1332] Starting a new job with PID 1332
2018-09-11 23:19:00,910 [salt.minion      :1708][INFO    ][1332] Returning information for job: 20180911231900860658
2018-09-11 23:19:08,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:19:08,244 [salt.state       :290 ][INFO    ][935] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-09-11 23:19:08,262 [salt.state       :905 ][INFO    ][935] Loading fresh modules for state activity
2018-09-11 23:19:08,296 [salt.state       :1941][INFO    ][935] Completed state [haproxy] at time 23:19:08.296494 duration_in_ms=10235.659
2018-09-11 23:19:08,300 [salt.state       :1770][INFO    ][935] Running state [/etc/default/haproxy] at time 23:19:08.300391
2018-09-11 23:19:08,300 [salt.state       :1803][INFO    ][935] Executing state file.managed for [/etc/default/haproxy]
2018-09-11 23:19:08,328 [salt.fileclient  :1215][INFO    ][935] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-09-11 23:19:08,331 [salt.state       :290 ][INFO    ][935] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-09-11 23:19:08,334 [salt.state       :1941][INFO    ][935] Completed state [/etc/default/haproxy] at time 23:19:08.334489 duration_in_ms=34.098
2018-09-11 23:19:08,335 [salt.state       :1770][INFO    ][935] Running state [/etc/haproxy/haproxy.cfg] at time 23:19:08.335006
2018-09-11 23:19:08,335 [salt.state       :1803][INFO    ][935] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-09-11 23:19:08,350 [salt.fileclient  :1215][INFO    ][935] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-09-11 23:19:08,462 [salt.state       :290 ][INFO    ][935] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 10.167.4.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8777 check
+  server mdb02 10.167.4.33:8777 check
+  server mdb03 10.167.4.34:8777 check
+
+listen panko_api
+  bind 10.167.4.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8977 check
+  server mdb02 10.167.4.33:8977 check
+  server mdb03 10.167.4.34:8977 check
+
+listen gnocchi_api
+  bind 10.167.4.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8041 check
+  server mdb02 10.167.4.33:8041 check
+  server mdb03 10.167.4.34:8041 check
+
+listen aodh-api
+  bind 10.167.4.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 10.167.4.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 10.167.4.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-09-11 23:19:08,470 [salt.state       :1941][INFO    ][935] Completed state [/etc/haproxy/haproxy.cfg] at time 23:19:08.470045 duration_in_ms=135.039
2018-09-11 23:19:08,470 [salt.state       :1770][INFO    ][935] Running state [/etc/haproxy/ssl] at time 23:19:08.470340
2018-09-11 23:19:08,470 [salt.state       :1803][INFO    ][935] Executing state file.directory for [/etc/haproxy/ssl]
2018-09-11 23:19:08,471 [salt.state       :290 ][INFO    ][935] {'/etc/haproxy/ssl': 'New Dir'}
2018-09-11 23:19:08,471 [salt.state       :1941][INFO    ][935] Completed state [/etc/haproxy/ssl] at time 23:19:08.471939 duration_in_ms=1.6
2018-09-11 23:19:08,472 [salt.state       :1770][INFO    ][935] Running state [/etc/haproxy/errors/429.http11] at time 23:19:08.472169
2018-09-11 23:19:08,472 [salt.state       :1803][INFO    ][935] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-09-11 23:19:08,486 [salt.fileclient  :1215][INFO    ][935] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-09-11 23:19:08,491 [salt.state       :290 ][INFO    ][935] File changed:
New file
2018-09-11 23:19:08,491 [salt.state       :1941][INFO    ][935] Completed state [/etc/haproxy/errors/429.http11] at time 23:19:08.491962 duration_in_ms=19.792
2018-09-11 23:19:08,492 [salt.state       :1770][INFO    ][935] Running state [haproxy_status_packages] at time 23:19:08.492743
2018-09-11 23:19:08,492 [salt.state       :1803][INFO    ][935] Executing state pkg.installed for [haproxy_status_packages]
2018-09-11 23:19:08,985 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-11 23:19:09,012 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-09-11 23:19:10,978 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911231910957685
2018-09-11 23:19:10,996 [salt.minion      :1431][INFO    ][2053] Starting a new job with PID 2053
2018-09-11 23:19:11,012 [salt.minion      :1708][INFO    ][2053] Returning information for job: 20180911231910957685
2018-09-11 23:19:11,445 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:19:11,481 [salt.state       :290 ][INFO    ][935] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-09-11 23:19:11,497 [salt.state       :905 ][INFO    ][935] Loading fresh modules for state activity
2018-09-11 23:19:11,523 [salt.state       :1941][INFO    ][935] Completed state [haproxy_status_packages] at time 23:19:11.523600 duration_in_ms=3030.856
2018-09-11 23:19:11,527 [salt.state       :1770][INFO    ][935] Running state [/usr/bin/haproxy-status.sh] at time 23:19:11.527327
2018-09-11 23:19:11,527 [salt.state       :1803][INFO    ][935] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-09-11 23:19:11,549 [salt.fileclient  :1215][INFO    ][935] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-09-11 23:19:11,575 [salt.state       :290 ][INFO    ][935] File changed:
New file
2018-09-11 23:19:11,575 [salt.state       :1941][INFO    ][935] Completed state [/usr/bin/haproxy-status.sh] at time 23:19:11.575865 duration_in_ms=48.537
2018-09-11 23:19:11,578 [salt.state       :1770][INFO    ][935] Running state [net.ipv4.ip_nonlocal_bind] at time 23:19:11.578294
2018-09-11 23:19:11,578 [salt.state       :1803][INFO    ][935] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-09-11 23:19:11,581 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-09-11 23:19:11,595 [salt.state       :290 ][INFO    ][935] {'net.ipv4.ip_nonlocal_bind': 1}
2018-09-11 23:19:11,596 [salt.state       :1941][INFO    ][935] Completed state [net.ipv4.ip_nonlocal_bind] at time 23:19:11.596589 duration_in_ms=18.295
2018-09-11 23:19:11,929 [salt.state       :1770][INFO    ][935] Running state [haproxy] at time 23:19:11.928974
2018-09-11 23:19:11,929 [salt.state       :1803][INFO    ][935] Executing state service.running for [haproxy]
2018-09-11 23:19:11,930 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-09-11 23:19:11,943 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-09-11 23:19:11,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-09-11 23:19:11,968 [salt.state       :290 ][INFO    ][935] The service haproxy is already running
2018-09-11 23:19:11,968 [salt.state       :1941][INFO    ][935] Completed state [haproxy] at time 23:19:11.968830 duration_in_ms=39.856
2018-09-11 23:19:11,969 [salt.state       :1770][INFO    ][935] Running state [haproxy] at time 23:19:11.969406
2018-09-11 23:19:11,970 [salt.state       :1803][INFO    ][935] Executing state service.mod_watch for [haproxy]
2018-09-11 23:19:11,971 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-09-11 23:19:11,989 [salt.loaded.int.module.cmdmod:395 ][INFO    ][935] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-09-11 23:19:12,022 [salt.state       :290 ][INFO    ][935] {'haproxy': True}
2018-09-11 23:19:12,023 [salt.state       :1941][INFO    ][935] Completed state [haproxy] at time 23:19:12.023125 duration_in_ms=53.719
2018-09-11 23:19:12,030 [salt.minion      :1708][INFO    ][935] Returning information for job: 20180911231855776958
2018-09-11 23:19:13,821 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command service.status with jid 20180911231913800882
2018-09-11 23:19:13,847 [salt.minion      :1431][INFO    ][2167] Starting a new job with PID 2167
2018-09-11 23:19:14,254 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2167] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-09-11 23:19:14,274 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2167] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-09-11 23:19:14,289 [salt.minion      :1708][INFO    ][2167] Returning information for job: 20180911231913800882
2018-09-11 23:19:15,285 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command service.restart with jid 20180911231915265409
2018-09-11 23:19:15,308 [salt.minion      :1431][INFO    ][2175] Starting a new job with PID 2175
2018-09-11 23:19:15,682 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2175] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-09-11 23:19:15,718 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2175] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-09-11 23:19:15,754 [salt.minion      :1708][INFO    ][2175] Returning information for job: 20180911231915265409
2018-09-11 23:48:39,875 [salt.utils.schedule:1375][INFO    ][3184] Running scheduled job: __mine_interval
2018-09-11 23:59:39,487 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command state.sls with jid 20180911235939471338
2018-09-11 23:59:39,513 [salt.minion      :1431][INFO    ][2333] Starting a new job with PID 2333
2018-09-11 23:59:40,230 [salt.state       :905 ][INFO    ][2333] Loading fresh modules for state activity
2018-09-11 23:59:40,272 [salt.fileclient  :1215][INFO    ][2333] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-09-11 23:59:40,302 [salt.fileclient  :1215][INFO    ][2333] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-09-11 23:59:40,324 [salt.fileclient  :1215][INFO    ][2333] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-09-11 23:59:40,359 [salt.fileclient  :1215][INFO    ][2333] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-09-11 23:59:40,979 [salt.state       :1770][INFO    ][2333] Running state [redis-server] at time 23:59:40.979209
2018-09-11 23:59:40,979 [salt.state       :1803][INFO    ][2333] Executing state pkg.installed for [redis-server]
2018-09-11 23:59:40,980 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:59:41,358 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-09-11 23:59:41,476 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-11 23:59:44,549 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911235944531068
2018-09-11 23:59:44,597 [salt.minion      :1431][INFO    ][2693] Starting a new job with PID 2693
2018-09-11 23:59:44,615 [salt.minion      :1708][INFO    ][2693] Returning information for job: 20180911235944531068
2018-09-11 23:59:45,567 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-11 23:59:45,597 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-09-11 23:59:52,501 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:59:52,545 [salt.state       :290 ][INFO    ][2333] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-09-11 23:59:52,562 [salt.state       :905 ][INFO    ][2333] Loading fresh modules for state activity
2018-09-11 23:59:52,593 [salt.state       :1941][INFO    ][2333] Completed state [redis-server] at time 23:59:52.593057 duration_in_ms=11613.846
2018-09-11 23:59:52,599 [salt.state       :1770][INFO    ][2333] Running state [vm.overcommit_memory] at time 23:59:52.599877
2018-09-11 23:59:52,600 [salt.state       :1803][INFO    ][2333] Executing state sysctl.present for [vm.overcommit_memory]
2018-09-11 23:59:52,604 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-09-11 23:59:52,617 [salt.state       :290 ][INFO    ][2333] {'vm.overcommit_memory': 1}
2018-09-11 23:59:52,618 [salt.state       :1941][INFO    ][2333] Completed state [vm.overcommit_memory] at time 23:59:52.618186 duration_in_ms=18.309
2018-09-11 23:59:52,621 [salt.state       :1770][INFO    ][2333] Running state [/etc/redis/redis.conf] at time 23:59:52.621128
2018-09-11 23:59:52,621 [salt.state       :1803][INFO    ][2333] Executing state file.managed for [/etc/redis/redis.conf]
2018-09-11 23:59:52,652 [salt.fileclient  :1215][INFO    ][2333] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-09-11 23:59:52,700 [salt.state       :290 ][INFO    ][2333] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.32
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -505,8 +505,7 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
-appendonly no
+appendonly yes
 
 # The name of the append only file (default: "appendonly.aof")
 
@@ -535,9 +534,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-09-11 23:59:52,700 [salt.state       :1941][INFO    ][2333] Completed state [/etc/redis/redis.conf] at time 23:59:52.700325 duration_in_ms=79.196
2018-09-11 23:59:53,016 [salt.state       :1770][INFO    ][2333] Running state [redis-server] at time 23:59:53.016025
2018-09-11 23:59:53,016 [salt.state       :1803][INFO    ][2333] Executing state service.running for [redis-server]
2018-09-11 23:59:53,016 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-09-11 23:59:53,030 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-09-11 23:59:53,041 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-09-11 23:59:53,052 [salt.state       :290 ][INFO    ][2333] The service redis-server is already running
2018-09-11 23:59:53,052 [salt.state       :1941][INFO    ][2333] Completed state [redis-server] at time 23:59:53.052683 duration_in_ms=36.658
2018-09-11 23:59:53,052 [salt.state       :1770][INFO    ][2333] Running state [redis-server] at time 23:59:53.052928
2018-09-11 23:59:53,053 [salt.state       :1803][INFO    ][2333] Executing state service.mod_watch for [redis-server]
2018-09-11 23:59:53,053 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-09-11 23:59:53,067 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-09-11 23:59:53,380 [salt.state       :290 ][INFO    ][2333] {'redis-server': True}
2018-09-11 23:59:53,381 [salt.state       :1941][INFO    ][2333] Completed state [redis-server] at time 23:59:53.381078 duration_in_ms=328.149
2018-09-11 23:59:53,385 [salt.state       :1770][INFO    ][2333] Running state [redis-sentinel] at time 23:59:53.385157
2018-09-11 23:59:53,385 [salt.state       :1803][INFO    ][2333] Executing state pkg.installed for [redis-sentinel]
2018-09-11 23:59:53,590 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-11 23:59:53,619 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-09-11 23:59:54,773 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180911235954756733
2018-09-11 23:59:54,791 [salt.minion      :1431][INFO    ][3343] Starting a new job with PID 3343
2018-09-11 23:59:54,810 [salt.minion      :1708][INFO    ][3343] Returning information for job: 20180911235954756733
2018-09-11 23:59:57,765 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-11 23:59:57,803 [salt.state       :290 ][INFO    ][2333] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-09-11 23:59:57,817 [salt.state       :905 ][INFO    ][2333] Loading fresh modules for state activity
2018-09-11 23:59:57,839 [salt.state       :1941][INFO    ][2333] Completed state [redis-sentinel] at time 23:59:57.839773 duration_in_ms=4454.617
2018-09-11 23:59:58,157 [salt.state       :1770][INFO    ][2333] Running state [/etc/redis/sentinel.conf] at time 23:59:58.157331
2018-09-11 23:59:58,158 [salt.state       :1803][INFO    ][2333] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-09-11 23:59:58,179 [salt.fileclient  :1215][INFO    ][2333] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-09-11 23:59:58,209 [salt.state       :290 ][INFO    ][2333] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.32
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 10.167.4.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-09-11 23:59:58,214 [salt.state       :1941][INFO    ][2333] Completed state [/etc/redis/sentinel.conf] at time 23:59:58.214709 duration_in_ms=57.379
2018-09-11 23:59:58,215 [salt.state       :1770][INFO    ][2333] Running state [redis-sentinel] at time 23:59:58.215011
2018-09-11 23:59:58,215 [salt.state       :1803][INFO    ][2333] Executing state service.running for [redis-sentinel]
2018-09-11 23:59:58,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-09-11 23:59:58,230 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-09-11 23:59:58,241 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-09-11 23:59:58,253 [salt.state       :290 ][INFO    ][2333] The service redis-sentinel is already running
2018-09-11 23:59:58,254 [salt.state       :1941][INFO    ][2333] Completed state [redis-sentinel] at time 23:59:58.254248 duration_in_ms=39.236
2018-09-11 23:59:58,254 [salt.state       :1770][INFO    ][2333] Running state [redis-sentinel] at time 23:59:58.254642
2018-09-11 23:59:58,255 [salt.state       :1803][INFO    ][2333] Executing state service.mod_watch for [redis-sentinel]
2018-09-11 23:59:58,255 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-09-11 23:59:58,269 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2333] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-09-11 23:59:58,520 [salt.state       :290 ][INFO    ][2333] {'redis-sentinel': True}
2018-09-11 23:59:58,521 [salt.state       :1941][INFO    ][2333] Completed state [redis-sentinel] at time 23:59:58.520965 duration_in_ms=266.322
2018-09-11 23:59:58,526 [salt.minion      :1708][INFO    ][2333] Returning information for job: 20180911235939471338
2018-09-11 23:59:59,236 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command state.sls with jid 20180911235959220016
2018-09-11 23:59:59,262 [salt.minion      :1431][INFO    ][3651] Starting a new job with PID 3651
2018-09-12 00:00:03,986 [salt.state       :905 ][INFO    ][3651] Loading fresh modules for state activity
2018-09-12 00:00:04,322 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000004305472
2018-09-12 00:00:04,342 [salt.minion      :1431][INFO    ][3664] Starting a new job with PID 3664
2018-09-12 00:00:04,359 [salt.minion      :1708][INFO    ][3664] Returning information for job: 20180912000004305472
2018-09-12 00:00:04,619 [salt.state       :1770][INFO    ][3651] Running state [redis-server] at time 00:00:04.619132
2018-09-12 00:00:04,619 [salt.state       :1803][INFO    ][3651] Executing state pkg.installed for [redis-server]
2018-09-12 00:00:04,620 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3651] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:00:04,958 [salt.state       :290 ][INFO    ][3651] All specified packages are already installed
2018-09-12 00:00:04,958 [salt.state       :1941][INFO    ][3651] Completed state [redis-server] at time 00:00:04.958395 duration_in_ms=339.263
2018-09-12 00:00:04,959 [salt.state       :1770][INFO    ][3651] Running state [vm.overcommit_memory] at time 00:00:04.959272
2018-09-12 00:00:04,959 [salt.state       :1803][INFO    ][3651] Executing state sysctl.present for [vm.overcommit_memory]
2018-09-12 00:00:04,978 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3651] Executing command 'sysctl -n vm.overcommit_memory' in directory '/root'
2018-09-12 00:00:04,993 [salt.state       :290 ][INFO    ][3651] Sysctl value vm.overcommit_memory = 1 is already set
2018-09-12 00:00:04,993 [salt.state       :1941][INFO    ][3651] Completed state [vm.overcommit_memory] at time 00:00:04.993716 duration_in_ms=34.444
2018-09-12 00:00:04,999 [salt.state       :1770][INFO    ][3651] Running state [/etc/redis/redis.conf] at time 00:00:04.999216
2018-09-12 00:00:04,999 [salt.state       :1803][INFO    ][3651] Executing state file.managed for [/etc/redis/redis.conf]
2018-09-12 00:00:05,058 [salt.state       :290 ][INFO    ][3651] File /etc/redis/redis.conf is in the correct state
2018-09-12 00:00:05,058 [salt.state       :1941][INFO    ][3651] Completed state [/etc/redis/redis.conf] at time 00:00:05.058778 duration_in_ms=59.562
2018-09-12 00:00:05,059 [salt.state       :1770][INFO    ][3651] Running state [redis-server] at time 00:00:05.059555
2018-09-12 00:00:05,059 [salt.state       :1803][INFO    ][3651] Executing state service.running for [redis-server]
2018-09-12 00:00:05,060 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3651] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-09-12 00:00:05,083 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3651] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-09-12 00:00:05,100 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3651] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-09-12 00:00:05,119 [salt.state       :290 ][INFO    ][3651] The service redis-server is already running
2018-09-12 00:00:05,120 [salt.state       :1941][INFO    ][3651] Completed state [redis-server] at time 00:00:05.120009 duration_in_ms=60.454
2018-09-12 00:00:05,120 [salt.state       :1770][INFO    ][3651] Running state [redis-sentinel] at time 00:00:05.120508
2018-09-12 00:00:05,120 [salt.state       :1803][INFO    ][3651] Executing state pkg.installed for [redis-sentinel]
2018-09-12 00:00:05,129 [salt.state       :290 ][INFO    ][3651] All specified packages are already installed
2018-09-12 00:00:05,129 [salt.state       :1941][INFO    ][3651] Completed state [redis-sentinel] at time 00:00:05.129744 duration_in_ms=9.236
2018-09-12 00:00:05,130 [salt.state       :1770][INFO    ][3651] Running state [/etc/redis/sentinel.conf] at time 00:00:05.130716
2018-09-12 00:00:05,131 [salt.state       :1803][INFO    ][3651] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-09-12 00:00:05,172 [salt.state       :290 ][INFO    ][3651] File /etc/redis/sentinel.conf is in the correct state
2018-09-12 00:00:05,172 [salt.state       :1941][INFO    ][3651] Completed state [/etc/redis/sentinel.conf] at time 00:00:05.172599 duration_in_ms=41.883
2018-09-12 00:00:05,172 [salt.state       :1770][INFO    ][3651] Running state [redis-sentinel] at time 00:00:05.172940
2018-09-12 00:00:05,173 [salt.state       :1803][INFO    ][3651] Executing state service.running for [redis-sentinel]
2018-09-12 00:00:05,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3651] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-09-12 00:00:05,195 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3651] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-09-12 00:00:05,218 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3651] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-09-12 00:00:05,234 [salt.state       :290 ][INFO    ][3651] The service redis-sentinel is already running
2018-09-12 00:00:05,235 [salt.state       :1941][INFO    ][3651] Completed state [redis-sentinel] at time 00:00:05.235451 duration_in_ms=62.51
2018-09-12 00:00:05,238 [salt.minion      :1708][INFO    ][3651] Returning information for job: 20180911235959220016
2018-09-12 00:00:25,273 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command test.ping with jid 20180912000025258857
2018-09-12 00:00:25,295 [salt.minion      :1431][INFO    ][3692] Starting a new job with PID 3692
2018-09-12 00:00:25,321 [salt.minion      :1708][INFO    ][3692] Returning information for job: 20180912000025258857
2018-09-12 00:03:23,399 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command state.sls with jid 20180912000323382090
2018-09-12 00:03:23,421 [salt.minion      :1431][INFO    ][3707] Starting a new job with PID 3707
2018-09-12 00:03:27,283 [salt.state       :905 ][INFO    ][3707] Loading fresh modules for state activity
2018-09-12 00:03:27,326 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-09-12 00:03:27,353 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-09-12 00:03:27,411 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-09-12 00:03:27,437 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-09-12 00:03:27,463 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-09-12 00:03:27,527 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-09-12 00:03:27,581 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-09-12 00:03:27,638 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-09-12 00:03:27,744 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-09-12 00:03:27,796 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-09-12 00:03:27,842 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-09-12 00:03:28,434 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000328418231
2018-09-12 00:03:28,451 [salt.minion      :1431][INFO    ][3738] Starting a new job with PID 3738
2018-09-12 00:03:28,452 [salt.state       :1770][INFO    ][3707] Running state [apache2] at time 00:03:28.452073
2018-09-12 00:03:28,453 [salt.state       :1803][INFO    ][3707] Executing state pkg.installed for [apache2]
2018-09-12 00:03:28,454 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:03:28,469 [salt.minion      :1708][INFO    ][3738] Returning information for job: 20180912000328418231
2018-09-12 00:03:28,816 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-09-12 00:03:28,923 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-12 00:03:30,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:03:30,684 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-09-12 00:03:38,583 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000338566018
2018-09-12 00:03:38,603 [salt.minion      :1431][INFO    ][4712] Starting a new job with PID 4712
2018-09-12 00:03:38,621 [salt.minion      :1708][INFO    ][4712] Returning information for job: 20180912000338566018
2018-09-12 00:03:46,138 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:03:46,184 [salt.state       :290 ][INFO    ][3707] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-09-12 00:03:46,203 [salt.state       :905 ][INFO    ][3707] Loading fresh modules for state activity
2018-09-12 00:03:46,233 [salt.state       :1941][INFO    ][3707] Completed state [apache2] at time 00:03:46.232970 duration_in_ms=17780.896
2018-09-12 00:03:46,244 [salt.state       :1770][INFO    ][3707] Running state [openssl] at time 00:03:46.244044
2018-09-12 00:03:46,245 [salt.state       :1803][INFO    ][3707] Executing state pkg.installed for [openssl]
2018-09-12 00:03:46,798 [salt.state       :290 ][INFO    ][3707] All specified packages are already installed
2018-09-12 00:03:46,799 [salt.state       :1941][INFO    ][3707] Completed state [openssl] at time 00:03:46.799187 duration_in_ms=555.144
2018-09-12 00:03:46,800 [salt.state       :1770][INFO    ][3707] Running state [a2enmod rewrite] at time 00:03:46.800428
2018-09-12 00:03:46,800 [salt.state       :1803][INFO    ][3707] Executing state cmd.run for [a2enmod rewrite]
2018-09-12 00:03:46,801 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command 'a2enmod rewrite' in directory '/root'
2018-09-12 00:03:46,855 [salt.state       :290 ][INFO    ][3707] {'pid': 5228, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-09-12 00:03:46,856 [salt.state       :1941][INFO    ][3707] Completed state [a2enmod rewrite] at time 00:03:46.856002 duration_in_ms=55.575
2018-09-12 00:03:46,856 [salt.state       :1770][INFO    ][3707] Running state [libapache2-mod-wsgi] at time 00:03:46.856837
2018-09-12 00:03:46,857 [salt.state       :1803][INFO    ][3707] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-09-12 00:03:46,873 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:03:46,902 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-09-12 00:03:48,732 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000348715843
2018-09-12 00:03:48,754 [salt.minion      :1431][INFO    ][5291] Starting a new job with PID 5291
2018-09-12 00:03:48,772 [salt.minion      :1708][INFO    ][5291] Returning information for job: 20180912000348715843
2018-09-12 00:03:52,519 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:03:52,565 [salt.state       :290 ][INFO    ][3707] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-09-12 00:03:52,580 [salt.state       :905 ][INFO    ][3707] Loading fresh modules for state activity
2018-09-12 00:03:52,613 [salt.state       :1941][INFO    ][3707] Completed state [libapache2-mod-wsgi] at time 00:03:52.613260 duration_in_ms=5756.421
2018-09-12 00:03:52,619 [salt.state       :1770][INFO    ][3707] Running state [a2enmod wsgi] at time 00:03:52.619807
2018-09-12 00:03:52,620 [salt.state       :1803][INFO    ][3707] Executing state cmd.run for [a2enmod wsgi]
2018-09-12 00:03:52,621 [salt.state       :290 ][INFO    ][3707] /etc/apache2/mods-enabled/wsgi.load exists
2018-09-12 00:03:52,622 [salt.state       :1941][INFO    ][3707] Completed state [a2enmod wsgi] at time 00:03:52.622201 duration_in_ms=2.394
2018-09-12 00:03:52,628 [salt.state       :1770][INFO    ][3707] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 00:03:52.628431
2018-09-12 00:03:52,628 [salt.state       :1803][INFO    ][3707] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-09-12 00:03:52,659 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-09-12 00:03:52,701 [salt.state       :290 ][INFO    ][3707] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-09-12 00:03:52,702 [salt.state       :1941][INFO    ][3707] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 00:03:52.701988 duration_in_ms=73.557
2018-09-12 00:03:52,702 [salt.state       :1770][INFO    ][3707] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 00:03:52.702195
2018-09-12 00:03:52,702 [salt.state       :1803][INFO    ][3707] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-09-12 00:03:52,702 [salt.state       :290 ][INFO    ][3707] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-09-12 00:03:52,702 [salt.state       :1941][INFO    ][3707] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 00:03:52.702877 duration_in_ms=0.681
2018-09-12 00:03:52,703 [salt.state       :1770][INFO    ][3707] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 00:03:52.703067
2018-09-12 00:03:52,703 [salt.state       :1803][INFO    ][3707] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-09-12 00:03:52,703 [salt.state       :290 ][INFO    ][3707] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-09-12 00:03:52,703 [salt.state       :1941][INFO    ][3707] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 00:03:52.703696 duration_in_ms=0.629
2018-09-12 00:03:52,704 [salt.state       :1770][INFO    ][3707] Running state [a2enmod mpm_prefork] at time 00:03:52.704156
2018-09-12 00:03:52,704 [salt.state       :1803][INFO    ][3707] Executing state cmd.run for [a2enmod mpm_prefork]
2018-09-12 00:03:52,706 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-09-12 00:03:52,749 [salt.state       :290 ][INFO    ][3707] {'pid': 5557, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-09-12 00:03:52,750 [salt.state       :1941][INFO    ][3707] Completed state [a2enmod mpm_prefork] at time 00:03:52.750379 duration_in_ms=46.223
2018-09-12 00:03:52,750 [salt.state       :1770][INFO    ][3707] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 00:03:52.750915
2018-09-12 00:03:52,751 [salt.state       :1803][INFO    ][3707] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-09-12 00:03:52,751 [salt.state       :290 ][INFO    ][3707] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-09-12 00:03:52,751 [salt.state       :1941][INFO    ][3707] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 00:03:52.751897 duration_in_ms=0.982
2018-09-12 00:03:52,752 [salt.state       :1770][INFO    ][3707] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 00:03:52.752101
2018-09-12 00:03:52,752 [salt.state       :1803][INFO    ][3707] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-09-12 00:03:52,752 [salt.state       :290 ][INFO    ][3707] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-09-12 00:03:52,752 [salt.state       :1941][INFO    ][3707] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 00:03:52.752840 duration_in_ms=0.739
2018-09-12 00:03:52,760 [salt.state       :1770][INFO    ][3707] Running state [apache_server_service_task] at time 00:03:52.760594
2018-09-12 00:03:52,760 [salt.state       :1803][INFO    ][3707] Executing state test.show_notification for [apache_server_service_task]
2018-09-12 00:03:52,761 [salt.state       :290 ][INFO    ][3707] Running apache.server.service
2018-09-12 00:03:52,761 [salt.state       :1941][INFO    ][3707] Completed state [apache_server_service_task] at time 00:03:52.761288 duration_in_ms=0.695
2018-09-12 00:03:52,761 [salt.state       :1770][INFO    ][3707] Running state [/etc/apache2/ports.conf] at time 00:03:52.761738
2018-09-12 00:03:52,761 [salt.state       :1803][INFO    ][3707] Executing state file.managed for [/etc/apache2/ports.conf]
2018-09-12 00:03:52,778 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-09-12 00:03:52,815 [salt.state       :290 ][INFO    ][3707] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-09-12 00:03:52,815 [salt.state       :1941][INFO    ][3707] Completed state [/etc/apache2/ports.conf] at time 00:03:52.815272 duration_in_ms=53.534
2018-09-12 00:03:52,815 [salt.state       :1770][INFO    ][3707] Running state [/etc/apache2/conf-available/security.conf] at time 00:03:52.815613
2018-09-12 00:03:52,815 [salt.state       :1803][INFO    ][3707] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-09-12 00:03:52,830 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-09-12 00:03:52,873 [salt.state       :290 ][INFO    ][3707] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-09-12 00:03:52,880 [salt.state       :1941][INFO    ][3707] Completed state [/etc/apache2/conf-available/security.conf] at time 00:03:52.880767 duration_in_ms=65.153
2018-09-12 00:03:53,283 [salt.state       :1770][INFO    ][3707] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 00:03:53.283627
2018-09-12 00:03:53,284 [salt.state       :1803][INFO    ][3707] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-09-12 00:03:53,285 [salt.state       :290 ][INFO    ][3707] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-09-12 00:03:53,285 [salt.state       :1941][INFO    ][3707] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 00:03:53.285749 duration_in_ms=2.123
2018-09-12 00:03:53,286 [salt.state       :1770][INFO    ][3707] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 00:03:53.286296
2018-09-12 00:03:53,286 [salt.state       :1803][INFO    ][3707] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-09-12 00:03:53,306 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-09-12 00:03:53,332 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-09-12 00:03:53,378 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-09-12 00:03:53,396 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-09-12 00:03:53,456 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-09-12 00:03:53,474 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-09-12 00:03:53,495 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-09-12 00:03:53,504 [salt.state       :290 ][INFO    ][3707] File changed:
New file
2018-09-12 00:03:53,505 [salt.state       :1941][INFO    ][3707] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 00:03:53.505518 duration_in_ms=219.222
2018-09-12 00:03:53,506 [salt.state       :1770][INFO    ][3707] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 00:03:53.506275
2018-09-12 00:03:53,506 [salt.state       :1803][INFO    ][3707] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-09-12 00:03:53,661 [salt.state       :290 ][INFO    ][3707] File changed:
New file
2018-09-12 00:03:53,662 [salt.state       :1941][INFO    ][3707] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 00:03:53.662575 duration_in_ms=156.3
2018-09-12 00:03:53,664 [salt.state       :1770][INFO    ][3707] Running state [apache2] at time 00:03:53.664130
2018-09-12 00:03:53,664 [salt.state       :1803][INFO    ][3707] Executing state service.running for [apache2]
2018-09-12 00:03:53,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-09-12 00:03:53,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-12 00:03:53,709 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-12 00:03:53,734 [salt.state       :290 ][INFO    ][3707] The service apache2 is already running
2018-09-12 00:03:53,735 [salt.state       :1941][INFO    ][3707] Completed state [apache2] at time 00:03:53.735762 duration_in_ms=71.631
2018-09-12 00:03:53,736 [salt.state       :1770][INFO    ][3707] Running state [apache2] at time 00:03:53.736585
2018-09-12 00:03:53,737 [salt.state       :1803][INFO    ][3707] Executing state service.mod_watch for [apache2]
2018-09-12 00:03:53,739 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-12 00:03:53,758 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-09-12 00:03:53,941 [salt.state       :290 ][INFO    ][3707] {'apache2': True}
2018-09-12 00:03:53,942 [salt.state       :1941][INFO    ][3707] Completed state [apache2] at time 00:03:53.941995 duration_in_ms=205.409
2018-09-12 00:03:53,943 [salt.state       :1770][INFO    ][3707] Running state [/etc/apache2/conf-enabled/security.conf] at time 00:03:53.943030
2018-09-12 00:03:53,943 [salt.state       :1803][INFO    ][3707] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-09-12 00:03:53,949 [salt.state       :290 ][INFO    ][3707] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-09-12 00:03:53,949 [salt.state       :1941][INFO    ][3707] Completed state [/etc/apache2/conf-enabled/security.conf] at time 00:03:53.949700 duration_in_ms=6.671
2018-09-12 00:03:53,951 [salt.state       :1770][INFO    ][3707] Running state [gnocchi-common] at time 00:03:53.951274
2018-09-12 00:03:53,951 [salt.state       :1803][INFO    ][3707] Executing state pkg.installed for [gnocchi-common]
2018-09-12 00:03:54,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:03:54,165 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-09-12 00:03:58,886 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000358868595
2018-09-12 00:03:58,903 [salt.minion      :1431][INFO    ][5803] Starting a new job with PID 5803
2018-09-12 00:03:58,979 [salt.minion      :1708][INFO    ][5803] Returning information for job: 20180912000358868595
2018-09-12 00:04:09,092 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000409074219
2018-09-12 00:04:09,112 [salt.minion      :1431][INFO    ][6057] Starting a new job with PID 6057
2018-09-12 00:04:09,198 [salt.minion      :1708][INFO    ][6057] Returning information for job: 20180912000409074219
2018-09-12 00:04:19,112 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000419094106
2018-09-12 00:04:19,138 [salt.minion      :1431][INFO    ][6343] Starting a new job with PID 6343
2018-09-12 00:04:19,234 [salt.minion      :1708][INFO    ][6343] Returning information for job: 20180912000419094106
2018-09-12 00:04:29,141 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000429122449
2018-09-12 00:04:29,160 [salt.minion      :1431][INFO    ][6593] Starting a new job with PID 6593
2018-09-12 00:04:29,241 [salt.minion      :1708][INFO    ][6593] Returning information for job: 20180912000429122449
2018-09-12 00:04:39,365 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000439345934
2018-09-12 00:04:39,390 [salt.minion      :1431][INFO    ][6827] Starting a new job with PID 6827
2018-09-12 00:04:39,472 [salt.minion      :1708][INFO    ][6827] Returning information for job: 20180912000439345934
2018-09-12 00:04:49,389 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000449370558
2018-09-12 00:04:49,406 [salt.minion      :1431][INFO    ][7065] Starting a new job with PID 7065
2018-09-12 00:04:49,599 [salt.minion      :1708][INFO    ][7065] Returning information for job: 20180912000449370558
2018-09-12 00:04:59,516 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000459498054
2018-09-12 00:04:59,549 [salt.minion      :1431][INFO    ][7642] Starting a new job with PID 7642
2018-09-12 00:04:59,664 [salt.minion      :1708][INFO    ][7642] Returning information for job: 20180912000459498054
2018-09-12 00:05:09,577 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000509559139
2018-09-12 00:05:09,599 [salt.minion      :1431][INFO    ][7841] Starting a new job with PID 7841
2018-09-12 00:05:09,660 [salt.minion      :1708][INFO    ][7841] Returning information for job: 20180912000509559139
2018-09-12 00:05:19,777 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000519758410
2018-09-12 00:05:19,795 [salt.minion      :1431][INFO    ][8194] Starting a new job with PID 8194
2018-09-12 00:05:19,856 [salt.minion      :1708][INFO    ][8194] Returning information for job: 20180912000519758410
2018-09-12 00:05:29,985 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000529967635
2018-09-12 00:05:30,005 [salt.minion      :1431][INFO    ][8525] Starting a new job with PID 8525
2018-09-12 00:05:30,065 [salt.minion      :1708][INFO    ][8525] Returning information for job: 20180912000529967635
2018-09-12 00:05:37,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:05:37,546 [salt.state       :290 ][INFO    ][3707] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp4'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.1-1.0~u16.04+mcp16'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp3'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp6'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp7'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp1'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-09-12 00:05:37,571 [salt.state       :905 ][INFO    ][3707] Loading fresh modules for state activity
2018-09-12 00:05:37,594 [salt.state       :1941][INFO    ][3707] Completed state [gnocchi-common] at time 00:05:37.594837 duration_in_ms=103643.563
2018-09-12 00:05:37,598 [salt.state       :1770][INFO    ][3707] Running state [/etc/gnocchi/gnocchi.conf] at time 00:05:37.598040
2018-09-12 00:05:37,598 [salt.state       :1803][INFO    ][3707] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-09-12 00:05:37,619 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-09-12 00:05:37,681 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-09-12 00:05:37,695 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-09-12 00:05:37,719 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-09-12 00:05:37,749 [salt.fileclient  :1215][INFO    ][3707] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-09-12 00:05:37,757 [salt.state       :290 ][INFO    ][3707] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@10.167.4.23/gnocchi
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -515,153 +316,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +480,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://10.167.4.32:6379

2018-09-12 00:05:37,764 [salt.state       :1941][INFO    ][3707] Completed state [/etc/gnocchi/gnocchi.conf] at time 00:05:37.764721 duration_in_ms=166.68
2018-09-12 00:05:37,780 [salt.state       :1770][INFO    ][3707] Running state [gnocchi-api] at time 00:05:37.780654
2018-09-12 00:05:37,780 [salt.state       :1803][INFO    ][3707] Executing state pkg.installed for [gnocchi-api]
2018-09-12 00:05:38,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:05:38,816 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-09-12 00:05:40,196 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000540180290
2018-09-12 00:05:40,212 [salt.minion      :1431][INFO    ][8872] Starting a new job with PID 8872
2018-09-12 00:05:40,242 [salt.minion      :1708][INFO    ][8872] Returning information for job: 20180912000540180290
2018-09-12 00:05:50,378 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000550361345
2018-09-12 00:05:50,399 [salt.minion      :1431][INFO    ][9304] Starting a new job with PID 9304
2018-09-12 00:05:50,420 [salt.minion      :1708][INFO    ][9304] Returning information for job: 20180912000550361345
2018-09-12 00:05:58,645 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:05:58,705 [salt.state       :290 ][INFO    ][3707] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp3'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp7'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp14'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-09-12 00:05:58,726 [salt.state       :905 ][INFO    ][3707] Loading fresh modules for state activity
2018-09-12 00:05:58,752 [salt.state       :1941][INFO    ][3707] Completed state [gnocchi-api] at time 00:05:58.752759 duration_in_ms=20972.103
2018-09-12 00:05:58,762 [salt.state       :1770][INFO    ][3707] Running state [gnocchi-metricd] at time 00:05:58.762100
2018-09-12 00:05:58,763 [salt.state       :1803][INFO    ][3707] Executing state pkg.installed for [gnocchi-metricd]
2018-09-12 00:05:59,851 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:05:59,886 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-09-12 00:06:00,559 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000600541726
2018-09-12 00:06:00,582 [salt.minion      :1431][INFO    ][9752] Starting a new job with PID 9752
2018-09-12 00:06:00,601 [salt.minion      :1708][INFO    ][9752] Returning information for job: 20180912000600541726
2018-09-12 00:06:03,470 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:06:03,504 [salt.state       :290 ][INFO    ][3707] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-09-12 00:06:03,523 [salt.state       :905 ][INFO    ][3707] Loading fresh modules for state activity
2018-09-12 00:06:03,641 [salt.state       :1941][INFO    ][3707] Completed state [gnocchi-metricd] at time 00:06:03.641198 duration_in_ms=4879.098
2018-09-12 00:06:03,644 [salt.state       :1770][INFO    ][3707] Running state [python-memcache] at time 00:06:03.644924
2018-09-12 00:06:03,645 [salt.state       :1803][INFO    ][3707] Executing state pkg.installed for [python-memcache]
2018-09-12 00:06:04,123 [salt.state       :290 ][INFO    ][3707] All specified packages are already installed
2018-09-12 00:06:04,123 [salt.state       :1941][INFO    ][3707] Completed state [python-memcache] at time 00:06:04.123559 duration_in_ms=478.634
2018-09-12 00:06:04,124 [salt.state       :1770][INFO    ][3707] Running state [gnocchi-upgrade] at time 00:06:04.124810
2018-09-12 00:06:04,125 [salt.state       :1803][INFO    ][3707] Executing state cmd.run for [gnocchi-upgrade]
2018-09-12 00:06:04,125 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-09-12 00:06:05,981 [salt.state       :290 ][INFO    ][3707] {'pid': 9972, 'retcode': 0, 'stderr': '2018-09-12 00:06:05,437 [9980] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-09-12 00:06:05,748 [9980] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@10.167.4.23/gnocchi\n2018-09-12 00:06:05,905 [9980] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=10.167.4.32,port=6379,db=0>>>\n2018-09-12 00:06:05,906 [9980] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-09-12 00:06:05,981 [salt.state       :1941][INFO    ][3707] Completed state [gnocchi-upgrade] at time 00:06:05.981473 duration_in_ms=1856.662
2018-09-12 00:06:05,983 [salt.state       :1770][INFO    ][3707] Running state [wsgi_gnocchi] at time 00:06:05.983811
2018-09-12 00:06:05,984 [salt.state       :1803][INFO    ][3707] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-09-12 00:06:05,984 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-09-12 00:06:06,041 [salt.state       :290 ][INFO    ][3707] {'new': 'wsgi_gnocchi', 'old': None}
2018-09-12 00:06:06,041 [salt.state       :1941][INFO    ][3707] Completed state [wsgi_gnocchi] at time 00:06:06.041437 duration_in_ms=57.626
2018-09-12 00:06:06,043 [salt.state       :1770][INFO    ][3707] Running state [apache2] at time 00:06:06.043378
2018-09-12 00:06:06,043 [salt.state       :1803][INFO    ][3707] Executing state service.running for [apache2]
2018-09-12 00:06:06,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-12 00:06:06,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-12 00:06:06,090 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-09-12 00:06:07,275 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-12 00:06:07,289 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-12 00:06:07,302 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-12 00:06:07,319 [salt.state       :290 ][INFO    ][3707] {'apache2': True}
2018-09-12 00:06:07,319 [salt.state       :1941][INFO    ][3707] Completed state [apache2] at time 00:06:07.319336 duration_in_ms=1275.958
2018-09-12 00:06:07,320 [salt.state       :1770][INFO    ][3707] Running state [gnocchi-metricd] at time 00:06:07.320108
2018-09-12 00:06:07,320 [salt.state       :1803][INFO    ][3707] Executing state service.running for [gnocchi-metricd]
2018-09-12 00:06:07,321 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-09-12 00:06:07,335 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-09-12 00:06:07,349 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-09-12 00:06:07,366 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-09-12 00:06:07,397 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-09-12 00:06:07,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-09-12 00:06:07,461 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-09-12 00:06:07,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-09-12 00:06:08,145 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3707] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-09-12 00:06:08,173 [salt.state       :290 ][INFO    ][3707] {'gnocchi-metricd': True}
2018-09-12 00:06:08,173 [salt.state       :1941][INFO    ][3707] Completed state [gnocchi-metricd] at time 00:06:08.173856 duration_in_ms=853.748
2018-09-12 00:06:08,180 [salt.minion      :1708][INFO    ][3707] Returning information for job: 20180912000323382090
2018-09-12 00:08:52,241 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command test.ping with jid 20180912000852227197
2018-09-12 00:08:52,267 [salt.minion      :1431][INFO    ][10288] Starting a new job with PID 10288
2018-09-12 00:08:52,296 [salt.minion      :1708][INFO    ][10288] Returning information for job: 20180912000852227197
2018-09-12 00:09:14,442 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command state.sls with jid 20180912000914425446
2018-09-12 00:09:14,467 [salt.minion      :1431][INFO    ][10293] Starting a new job with PID 10293
2018-09-12 00:09:18,268 [salt.state       :905 ][INFO    ][10293] Loading fresh modules for state activity
2018-09-12 00:09:18,311 [salt.fileclient  :1215][INFO    ][10293] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-09-12 00:09:18,344 [salt.fileclient  :1215][INFO    ][10293] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-09-12 00:09:19,528 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000919509269
2018-09-12 00:09:19,546 [salt.minion      :1431][INFO    ][10321] Starting a new job with PID 10321
2018-09-12 00:09:19,561 [salt.minion      :1708][INFO    ][10321] Returning information for job: 20180912000919509269
2018-09-12 00:09:20,062 [salt.state       :1770][INFO    ][10293] Running state [apache2] at time 00:09:20.062021
2018-09-12 00:09:20,062 [salt.state       :1803][INFO    ][10293] Executing state pkg.installed for [apache2]
2018-09-12 00:09:20,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:09:20,393 [salt.state       :290 ][INFO    ][10293] All specified packages are already installed
2018-09-12 00:09:20,394 [salt.state       :1941][INFO    ][10293] Completed state [apache2] at time 00:09:20.394028 duration_in_ms=332.007
2018-09-12 00:09:20,394 [salt.state       :1770][INFO    ][10293] Running state [openssl] at time 00:09:20.394307
2018-09-12 00:09:20,394 [salt.state       :1803][INFO    ][10293] Executing state pkg.installed for [openssl]
2018-09-12 00:09:20,399 [salt.state       :290 ][INFO    ][10293] All specified packages are already installed
2018-09-12 00:09:20,399 [salt.state       :1941][INFO    ][10293] Completed state [openssl] at time 00:09:20.399417 duration_in_ms=5.11
2018-09-12 00:09:20,399 [salt.state       :1770][INFO    ][10293] Running state [a2enmod rewrite] at time 00:09:20.399805
2018-09-12 00:09:20,400 [salt.state       :1803][INFO    ][10293] Executing state cmd.run for [a2enmod rewrite]
2018-09-12 00:09:20,400 [salt.state       :290 ][INFO    ][10293] /etc/apache2/mods-enabled/rewrite.load exists
2018-09-12 00:09:20,400 [salt.state       :1941][INFO    ][10293] Completed state [a2enmod rewrite] at time 00:09:20.400434 duration_in_ms=0.629
2018-09-12 00:09:20,400 [salt.state       :1770][INFO    ][10293] Running state [libapache2-mod-wsgi] at time 00:09:20.400705
2018-09-12 00:09:20,400 [salt.state       :1803][INFO    ][10293] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-09-12 00:09:20,405 [salt.state       :290 ][INFO    ][10293] All specified packages are already installed
2018-09-12 00:09:20,405 [salt.state       :1941][INFO    ][10293] Completed state [libapache2-mod-wsgi] at time 00:09:20.405639 duration_in_ms=4.935
2018-09-12 00:09:20,405 [salt.state       :1770][INFO    ][10293] Running state [a2enmod wsgi] at time 00:09:20.405900
2018-09-12 00:09:20,406 [salt.state       :1803][INFO    ][10293] Executing state cmd.run for [a2enmod wsgi]
2018-09-12 00:09:20,406 [salt.state       :290 ][INFO    ][10293] /etc/apache2/mods-enabled/wsgi.load exists
2018-09-12 00:09:20,406 [salt.state       :1941][INFO    ][10293] Completed state [a2enmod wsgi] at time 00:09:20.406456 duration_in_ms=0.556
2018-09-12 00:09:20,410 [salt.state       :1770][INFO    ][10293] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 00:09:20.410391
2018-09-12 00:09:20,410 [salt.state       :1803][INFO    ][10293] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-09-12 00:09:20,559 [salt.state       :290 ][INFO    ][10293] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-09-12 00:09:20,559 [salt.state       :1941][INFO    ][10293] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 00:09:20.559606 duration_in_ms=149.216
2018-09-12 00:09:20,559 [salt.state       :1770][INFO    ][10293] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 00:09:20.559777
2018-09-12 00:09:20,559 [salt.state       :1803][INFO    ][10293] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-09-12 00:09:20,560 [salt.state       :290 ][INFO    ][10293] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-09-12 00:09:20,560 [salt.state       :1941][INFO    ][10293] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 00:09:20.560344 duration_in_ms=0.567
2018-09-12 00:09:20,560 [salt.state       :1770][INFO    ][10293] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 00:09:20.560500
2018-09-12 00:09:20,560 [salt.state       :1803][INFO    ][10293] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-09-12 00:09:20,560 [salt.state       :290 ][INFO    ][10293] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-09-12 00:09:20,561 [salt.state       :1941][INFO    ][10293] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 00:09:20.560983 duration_in_ms=0.484
2018-09-12 00:09:20,561 [salt.state       :1770][INFO    ][10293] Running state [a2enmod mpm_prefork] at time 00:09:20.561368
2018-09-12 00:09:20,561 [salt.state       :1803][INFO    ][10293] Executing state cmd.run for [a2enmod mpm_prefork]
2018-09-12 00:09:20,561 [salt.state       :290 ][INFO    ][10293] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-09-12 00:09:20,561 [salt.state       :1941][INFO    ][10293] Completed state [a2enmod mpm_prefork] at time 00:09:20.561899 duration_in_ms=0.531
2018-09-12 00:09:20,562 [salt.state       :1770][INFO    ][10293] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 00:09:20.562059
2018-09-12 00:09:20,562 [salt.state       :1803][INFO    ][10293] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-09-12 00:09:20,562 [salt.state       :290 ][INFO    ][10293] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-09-12 00:09:20,562 [salt.state       :1941][INFO    ][10293] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 00:09:20.562551 duration_in_ms=0.491
2018-09-12 00:09:20,562 [salt.state       :1770][INFO    ][10293] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 00:09:20.562706
2018-09-12 00:09:20,562 [salt.state       :1803][INFO    ][10293] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-09-12 00:09:20,563 [salt.state       :290 ][INFO    ][10293] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-09-12 00:09:20,563 [salt.state       :1941][INFO    ][10293] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 00:09:20.563187 duration_in_ms=0.482
2018-09-12 00:09:20,563 [salt.state       :1770][INFO    ][10293] Running state [apache_server_service_task] at time 00:09:20.563778
2018-09-12 00:09:20,563 [salt.state       :1803][INFO    ][10293] Executing state test.show_notification for [apache_server_service_task]
2018-09-12 00:09:20,564 [salt.state       :290 ][INFO    ][10293] Running apache.server.service
2018-09-12 00:09:20,564 [salt.state       :1941][INFO    ][10293] Completed state [apache_server_service_task] at time 00:09:20.564284 duration_in_ms=0.506
2018-09-12 00:09:20,564 [salt.state       :1770][INFO    ][10293] Running state [/etc/apache2/ports.conf] at time 00:09:20.564545
2018-09-12 00:09:20,564 [salt.state       :1803][INFO    ][10293] Executing state file.managed for [/etc/apache2/ports.conf]
2018-09-12 00:09:20,605 [salt.state       :290 ][INFO    ][10293] File /etc/apache2/ports.conf is in the correct state
2018-09-12 00:09:20,605 [salt.state       :1941][INFO    ][10293] Completed state [/etc/apache2/ports.conf] at time 00:09:20.605706 duration_in_ms=41.162
2018-09-12 00:09:20,606 [salt.state       :1770][INFO    ][10293] Running state [/etc/apache2/conf-available/security.conf] at time 00:09:20.605975
2018-09-12 00:09:20,606 [salt.state       :1803][INFO    ][10293] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-09-12 00:09:20,651 [salt.state       :290 ][INFO    ][10293] File /etc/apache2/conf-available/security.conf is in the correct state
2018-09-12 00:09:20,651 [salt.state       :1941][INFO    ][10293] Completed state [/etc/apache2/conf-available/security.conf] at time 00:09:20.651411 duration_in_ms=45.435
2018-09-12 00:09:20,655 [salt.state       :1770][INFO    ][10293] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 00:09:20.655145
2018-09-12 00:09:20,655 [salt.state       :1803][INFO    ][10293] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-09-12 00:09:20,655 [salt.state       :290 ][INFO    ][10293] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-09-12 00:09:20,655 [salt.state       :1941][INFO    ][10293] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 00:09:20.655707 duration_in_ms=0.562
2018-09-12 00:09:20,656 [salt.state       :1770][INFO    ][10293] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 00:09:20.655987
2018-09-12 00:09:20,656 [salt.state       :1803][INFO    ][10293] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-09-12 00:09:20,805 [salt.state       :290 ][INFO    ][10293] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-09-12 00:09:20,805 [salt.state       :1941][INFO    ][10293] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 00:09:20.805192 duration_in_ms=149.206
2018-09-12 00:09:20,805 [salt.state       :1770][INFO    ][10293] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 00:09:20.805524
2018-09-12 00:09:20,805 [salt.state       :1803][INFO    ][10293] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-09-12 00:09:20,960 [salt.state       :290 ][INFO    ][10293] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-09-12 00:09:20,960 [salt.state       :1941][INFO    ][10293] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 00:09:20.960497 duration_in_ms=154.972
2018-09-12 00:09:20,961 [salt.state       :1770][INFO    ][10293] Running state [apache2] at time 00:09:20.961735
2018-09-12 00:09:20,961 [salt.state       :1803][INFO    ][10293] Executing state service.running for [apache2]
2018-09-12 00:09:20,962 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-09-12 00:09:21,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-12 00:09:21,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-12 00:09:21,040 [salt.state       :290 ][INFO    ][10293] The service apache2 is already running
2018-09-12 00:09:21,041 [salt.state       :1941][INFO    ][10293] Completed state [apache2] at time 00:09:21.041090 duration_in_ms=79.355
2018-09-12 00:09:21,042 [salt.state       :1770][INFO    ][10293] Running state [/etc/apache2/conf-enabled/security.conf] at time 00:09:21.042116
2018-09-12 00:09:21,042 [salt.state       :1803][INFO    ][10293] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-09-12 00:09:21,045 [salt.state       :290 ][INFO    ][10293] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-09-12 00:09:21,045 [salt.state       :1941][INFO    ][10293] Completed state [/etc/apache2/conf-enabled/security.conf] at time 00:09:21.045635 duration_in_ms=3.519
2018-09-12 00:09:21,046 [salt.state       :1770][INFO    ][10293] Running state [panko-api] at time 00:09:21.046001
2018-09-12 00:09:21,046 [salt.state       :1803][INFO    ][10293] Executing state pkg.installed for [panko-api]
2018-09-12 00:09:21,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-09-12 00:09:21,168 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-12 00:09:23,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:09:23,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-09-12 00:09:29,270 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:09:29,318 [salt.state       :290 ][INFO    ][10293] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-09-12 00:09:29,348 [salt.state       :905 ][INFO    ][10293] Loading fresh modules for state activity
2018-09-12 00:09:29,372 [salt.state       :1941][INFO    ][10293] Completed state [panko-api] at time 00:09:29.372343 duration_in_ms=8326.341
2018-09-12 00:09:29,375 [salt.state       :1770][INFO    ][10293] Running state [/etc/panko/panko.conf] at time 00:09:29.375584
2018-09-12 00:09:29,375 [salt.state       :1803][INFO    ][10293] Executing state file.managed for [/etc/panko/panko.conf]
2018-09-12 00:09:29,398 [salt.fileclient  :1215][INFO    ][10293] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-09-12 00:09:29,438 [salt.fileclient  :1215][INFO    ][10293] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-09-12 00:09:29,455 [salt.fileclient  :1215][INFO    ][10293] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-09-12 00:09:29,515 [salt.state       :290 ][INFO    ][10293] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,23 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +158,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@10.167.4.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +236,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +308,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +324,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +362,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -466,110 +480,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-09-12 00:09:29,516 [salt.state       :1941][INFO    ][10293] Completed state [/etc/panko/panko.conf] at time 00:09:29.516596 duration_in_ms=141.012
2018-09-12 00:09:29,518 [salt.state       :1770][INFO    ][10293] Running state [panko-dbsync] at time 00:09:29.518899
2018-09-12 00:09:29,519 [salt.state       :1803][INFO    ][10293] Executing state cmd.run for [panko-dbsync]
2018-09-12 00:09:29,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command 'panko-dbsync' in directory '/root'
2018-09-12 00:09:29,904 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912000929649817
2018-09-12 00:09:29,918 [salt.minion      :1431][INFO    ][10921] Starting a new job with PID 10921
2018-09-12 00:09:29,932 [salt.minion      :1708][INFO    ][10921] Returning information for job: 20180912000929649817
2018-09-12 00:09:30,515 [salt.state       :290 ][INFO    ][10293] {'pid': 10900, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-09-12 00:09:30,516 [salt.state       :1941][INFO    ][10293] Completed state [panko-dbsync] at time 00:09:30.516022 duration_in_ms=997.122
2018-09-12 00:09:30,521 [salt.state       :1770][INFO    ][10293] Running state [wsgi_panko] at time 00:09:30.521422
2018-09-12 00:09:30,521 [salt.state       :1803][INFO    ][10293] Executing state apache_site.enabled for [wsgi_panko]
2018-09-12 00:09:30,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-09-12 00:09:30,573 [salt.state       :290 ][INFO    ][10293] {'new': 'wsgi_panko', 'old': None}
2018-09-12 00:09:30,574 [salt.state       :1941][INFO    ][10293] Completed state [wsgi_panko] at time 00:09:30.574001 duration_in_ms=52.577
2018-09-12 00:09:30,948 [salt.state       :1770][INFO    ][10293] Running state [apache2] at time 00:09:30.948612
2018-09-12 00:09:30,948 [salt.state       :1803][INFO    ][10293] Executing state service.running for [apache2]
2018-09-12 00:09:30,949 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-12 00:09:30,969 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-12 00:09:30,984 [salt.state       :290 ][INFO    ][10293] The service apache2 is already running
2018-09-12 00:09:30,985 [salt.state       :1941][INFO    ][10293] Completed state [apache2] at time 00:09:30.985120 duration_in_ms=36.507
2018-09-12 00:09:30,985 [salt.state       :1770][INFO    ][10293] Running state [apache2] at time 00:09:30.985581
2018-09-12 00:09:30,986 [salt.state       :1803][INFO    ][10293] Executing state service.mod_watch for [apache2]
2018-09-12 00:09:30,987 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-12 00:09:31,004 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10293] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-09-12 00:09:33,298 [salt.state       :290 ][INFO    ][10293] {'apache2': True}
2018-09-12 00:09:33,298 [salt.state       :1941][INFO    ][10293] Completed state [apache2] at time 00:09:33.298841 duration_in_ms=2313.26
2018-09-12 00:09:33,301 [salt.minion      :1708][INFO    ][10293] Returning information for job: 20180912000914425446
2018-09-12 00:09:49,108 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command test.ping with jid 20180912000949091859
2018-09-12 00:09:49,131 [salt.minion      :1431][INFO    ][11073] Starting a new job with PID 11073
2018-09-12 00:09:49,148 [salt.minion      :1708][INFO    ][11073] Returning information for job: 20180912000949091859
2018-09-12 00:11:25,797 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command state.sls with jid 20180912001125780795
2018-09-12 00:11:25,817 [salt.minion      :1431][INFO    ][11079] Starting a new job with PID 11079
2018-09-12 00:11:29,618 [salt.state       :905 ][INFO    ][11079] Loading fresh modules for state activity
2018-09-12 00:11:29,672 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-09-12 00:11:29,699 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-09-12 00:11:30,878 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001130860968
2018-09-12 00:11:30,892 [salt.minion      :1431][INFO    ][11092] Starting a new job with PID 11092
2018-09-12 00:11:30,906 [salt.minion      :1708][INFO    ][11092] Returning information for job: 20180912001130860968
2018-09-12 00:11:30,993 [salt.state       :1770][INFO    ][11079] Running state [aodh-api] at time 00:11:30.993363
2018-09-12 00:11:30,993 [salt.state       :1803][INFO    ][11079] Executing state pkg.installed for [aodh-api]
2018-09-12 00:11:30,994 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:11:31,392 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-09-12 00:11:31,509 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-12 00:11:33,233 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:11:33,262 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-09-12 00:11:41,013 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001140994563
2018-09-12 00:11:41,034 [salt.minion      :1431][INFO    ][11604] Starting a new job with PID 11604
2018-09-12 00:11:41,061 [salt.minion      :1708][INFO    ][11604] Returning information for job: 20180912001140994563
2018-09-12 00:11:51,169 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001151151035
2018-09-12 00:11:51,189 [salt.minion      :1431][INFO    ][11797] Starting a new job with PID 11797
2018-09-12 00:11:51,210 [salt.minion      :1708][INFO    ][11797] Returning information for job: 20180912001151151035
2018-09-12 00:12:01,321 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001201301758
2018-09-12 00:12:01,340 [salt.minion      :1431][INFO    ][16612] Starting a new job with PID 16612
2018-09-12 00:12:01,363 [salt.minion      :1708][INFO    ][16612] Returning information for job: 20180912001201301758
2018-09-12 00:12:05,372 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:12:05,416 [salt.state       :290 ][INFO    ][11079] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'c++-compiler' changed from 'absent' to '1'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-135.161'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev' changed from 'absent' to '1'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.6'

2018-09-12 00:12:05,448 [salt.state       :905 ][INFO    ][11079] Loading fresh modules for state activity
2018-09-12 00:12:05,585 [salt.state       :1941][INFO    ][11079] Completed state [aodh-api] at time 00:12:05.584912 duration_in_ms=34591.547
2018-09-12 00:12:05,593 [salt.state       :1770][INFO    ][11079] Running state [aodh-evaluator] at time 00:12:05.593051
2018-09-12 00:12:05,593 [salt.state       :1803][INFO    ][11079] Executing state pkg.installed for [aodh-evaluator]
2018-09-12 00:12:06,074 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:12:06,104 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-09-12 00:12:10,300 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:12:10,341 [salt.state       :290 ][INFO    ][11079] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-09-12 00:12:10,365 [salt.state       :905 ][INFO    ][11079] Loading fresh modules for state activity
2018-09-12 00:12:10,408 [salt.state       :1941][INFO    ][11079] Completed state [aodh-evaluator] at time 00:12:10.408558 duration_in_ms=4815.507
2018-09-12 00:12:10,415 [salt.state       :1770][INFO    ][11079] Running state [aodh-notifier] at time 00:12:10.415002
2018-09-12 00:12:10,415 [salt.state       :1803][INFO    ][11079] Executing state pkg.installed for [aodh-notifier]
2018-09-12 00:12:11,296 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:12:11,331 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-09-12 00:12:11,473 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001211456618
2018-09-12 00:12:11,492 [salt.minion      :1431][INFO    ][17016] Starting a new job with PID 17016
2018-09-12 00:12:11,523 [salt.minion      :1708][INFO    ][17016] Returning information for job: 20180912001211456618
2018-09-12 00:12:14,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:12:14,957 [salt.state       :290 ][INFO    ][11079] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-09-12 00:12:14,975 [salt.state       :905 ][INFO    ][11079] Loading fresh modules for state activity
2018-09-12 00:12:15,001 [salt.state       :1941][INFO    ][11079] Completed state [aodh-notifier] at time 00:12:15.000940 duration_in_ms=4585.936
2018-09-12 00:12:15,009 [salt.state       :1770][INFO    ][11079] Running state [aodh-listener] at time 00:12:15.009771
2018-09-12 00:12:15,010 [salt.state       :1803][INFO    ][11079] Executing state pkg.installed for [aodh-listener]
2018-09-12 00:12:15,513 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:12:15,547 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-09-12 00:12:19,183 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:12:19,222 [salt.state       :290 ][INFO    ][11079] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-09-12 00:12:19,243 [salt.state       :905 ][INFO    ][11079] Loading fresh modules for state activity
2018-09-12 00:12:19,268 [salt.state       :1941][INFO    ][11079] Completed state [aodh-listener] at time 00:12:19.268640 duration_in_ms=4258.868
2018-09-12 00:12:19,273 [salt.state       :1770][INFO    ][11079] Running state [python-aodhclient] at time 00:12:19.273048
2018-09-12 00:12:19,273 [salt.state       :1803][INFO    ][11079] Executing state pkg.installed for [python-aodhclient]
2018-09-12 00:12:19,818 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:12:19,849 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-09-12 00:12:21,632 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001221618515
2018-09-12 00:12:21,644 [salt.minion      :1431][INFO    ][17663] Starting a new job with PID 17663
2018-09-12 00:12:21,661 [salt.minion      :1708][INFO    ][17663] Returning information for job: 20180912001221618515
2018-09-12 00:12:22,015 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:12:22,056 [salt.state       :290 ][INFO    ][11079] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-09-12 00:12:22,077 [salt.state       :905 ][INFO    ][11079] Loading fresh modules for state activity
2018-09-12 00:12:22,100 [salt.state       :1941][INFO    ][11079] Completed state [python-aodhclient] at time 00:12:22.100481 duration_in_ms=2827.433
2018-09-12 00:12:22,104 [salt.state       :1770][INFO    ][11079] Running state [/etc/aodh/aodh.conf] at time 00:12:22.104142
2018-09-12 00:12:22,104 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-09-12 00:12:22,132 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-09-12 00:12:22,181 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-09-12 00:12:22,259 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-09-12 00:12:22,271 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-09-12 00:12:22,298 [salt.state       :290 ][INFO    ][11079] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 10.167.4.32
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 86400
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@10.167.4.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,291 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +862,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://10.167.4.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +878,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +916,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -775,995 +1034,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-09-12 00:12:22,300 [salt.state       :1941][INFO    ][11079] Completed state [/etc/aodh/aodh.conf] at time 00:12:22.300083 duration_in_ms=195.941
2018-09-12 00:12:22,300 [salt.state       :1770][INFO    ][11079] Running state [/etc/default/aodh-evaluator] at time 00:12:22.300491
2018-09-12 00:12:22,300 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-09-12 00:12:22,319 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-09-12 00:12:22,337 [salt.state       :290 ][INFO    ][11079] File changed:
New file
2018-09-12 00:12:22,337 [salt.state       :1941][INFO    ][11079] Completed state [/etc/default/aodh-evaluator] at time 00:12:22.337381 duration_in_ms=36.89
2018-09-12 00:12:22,337 [salt.state       :1770][INFO    ][11079] Running state [/etc/default/aodh-notifier] at time 00:12:22.337676
2018-09-12 00:12:22,337 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/default/aodh-notifier]
2018-09-12 00:12:22,368 [salt.state       :290 ][INFO    ][11079] File changed:
New file
2018-09-12 00:12:22,369 [salt.state       :1941][INFO    ][11079] Completed state [/etc/default/aodh-notifier] at time 00:12:22.368922 duration_in_ms=31.245
2018-09-12 00:12:22,369 [salt.state       :1770][INFO    ][11079] Running state [/etc/default/aodh-listener] at time 00:12:22.369634
2018-09-12 00:12:22,370 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/default/aodh-listener]
2018-09-12 00:12:22,405 [salt.state       :290 ][INFO    ][11079] File changed:
New file
2018-09-12 00:12:22,406 [salt.state       :1941][INFO    ][11079] Completed state [/etc/default/aodh-listener] at time 00:12:22.406319 duration_in_ms=36.685
2018-09-12 00:12:22,410 [salt.state       :1770][INFO    ][11079] Running state [aodh-dbsync] at time 00:12:22.410077
2018-09-12 00:12:22,410 [salt.state       :1803][INFO    ][11079] Executing state cmd.run for [aodh-dbsync]
2018-09-12 00:12:22,417 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command 'aodh-dbsync' in directory '/root'
2018-09-12 00:12:23,883 [salt.state       :290 ][INFO    ][11079] {'pid': 17723, 'retcode': 0, 'stderr': '', 'stdout': '2018-09-12 00:12:23.776 17724 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-09-12 00:12:23.776 17724 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-09-12 00:12:23,884 [salt.state       :1941][INFO    ][11079] Completed state [aodh-dbsync] at time 00:12:23.884804 duration_in_ms=1474.726
2018-09-12 00:12:23,886 [salt.state       :1770][INFO    ][11079] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 00:12:23.886621
2018-09-12 00:12:23,887 [salt.state       :1803][INFO    ][11079] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-09-12 00:12:23,908 [salt.fileclient  :1215][INFO    ][11079] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-09-12 00:12:23,936 [salt.state       :290 ][INFO    ][11079] File changed:
--- 
+++ 
@@ -1,18 +1,5 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 10.167.4.32:8042
 
 <VirtualHost *:8042>
     WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-09-12 00:12:23,937 [salt.state       :1941][INFO    ][11079] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 00:12:23.937794 duration_in_ms=51.174
2018-09-12 00:12:23,938 [salt.state       :1770][INFO    ][11079] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 00:12:23.938089
2018-09-12 00:12:23,938 [salt.state       :1803][INFO    ][11079] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-09-12 00:12:23,945 [salt.state       :290 ][INFO    ][11079] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-09-12 00:12:23,945 [salt.state       :1941][INFO    ][11079] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 00:12:23.945559 duration_in_ms=7.47
2018-09-12 00:12:24,356 [salt.state       :1770][INFO    ][11079] Running state [apache2] at time 00:12:24.356722
2018-09-12 00:12:24,357 [salt.state       :1803][INFO    ][11079] Executing state service.running for [apache2]
2018-09-12 00:12:24,358 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-09-12 00:12:24,383 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-12 00:12:24,398 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-09-12 00:12:24,415 [salt.state       :290 ][INFO    ][11079] The service apache2 is already running
2018-09-12 00:12:24,416 [salt.state       :1941][INFO    ][11079] Completed state [apache2] at time 00:12:24.416305 duration_in_ms=59.583
2018-09-12 00:12:24,416 [salt.state       :1770][INFO    ][11079] Running state [apache2] at time 00:12:24.416892
2018-09-12 00:12:24,417 [salt.state       :1803][INFO    ][11079] Executing state service.mod_watch for [apache2]
2018-09-12 00:12:24,418 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-09-12 00:12:24,432 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-09-12 00:12:26,743 [salt.state       :290 ][INFO    ][11079] {'apache2': True}
2018-09-12 00:12:26,743 [salt.state       :1941][INFO    ][11079] Completed state [apache2] at time 00:12:26.743902 duration_in_ms=2327.009
2018-09-12 00:12:26,745 [salt.state       :1770][INFO    ][11079] Running state [aodh-evaluator] at time 00:12:26.745528
2018-09-12 00:12:26,745 [salt.state       :1803][INFO    ][11079] Executing state service.running for [aodh-evaluator]
2018-09-12 00:12:26,746 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-09-12 00:12:26,770 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-09-12 00:12:26,799 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-09-12 00:12:26,816 [salt.state       :290 ][INFO    ][11079] The service aodh-evaluator is already running
2018-09-12 00:12:26,817 [salt.state       :1941][INFO    ][11079] Completed state [aodh-evaluator] at time 00:12:26.817757 duration_in_ms=72.228
2018-09-12 00:12:26,818 [salt.state       :1770][INFO    ][11079] Running state [aodh-evaluator] at time 00:12:26.818096
2018-09-12 00:12:26,819 [salt.state       :1803][INFO    ][11079] Executing state service.mod_watch for [aodh-evaluator]
2018-09-12 00:12:26,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-09-12 00:12:26,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-09-12 00:12:26,968 [salt.state       :290 ][INFO    ][11079] {'aodh-evaluator': True}
2018-09-12 00:12:26,968 [salt.state       :1941][INFO    ][11079] Completed state [aodh-evaluator] at time 00:12:26.968432 duration_in_ms=150.336
2018-09-12 00:12:26,969 [salt.state       :1770][INFO    ][11079] Running state [aodh-notifier] at time 00:12:26.969129
2018-09-12 00:12:26,969 [salt.state       :1803][INFO    ][11079] Executing state service.running for [aodh-notifier]
2018-09-12 00:12:26,970 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-09-12 00:12:26,999 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-09-12 00:12:27,029 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-09-12 00:12:27,051 [salt.state       :290 ][INFO    ][11079] The service aodh-notifier is already running
2018-09-12 00:12:27,051 [salt.state       :1941][INFO    ][11079] Completed state [aodh-notifier] at time 00:12:27.051503 duration_in_ms=82.373
2018-09-12 00:12:27,051 [salt.state       :1770][INFO    ][11079] Running state [aodh-notifier] at time 00:12:27.051720
2018-09-12 00:12:27,052 [salt.state       :1803][INFO    ][11079] Executing state service.mod_watch for [aodh-notifier]
2018-09-12 00:12:27,052 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-09-12 00:12:27,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-09-12 00:12:31,769 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001231750802
2018-09-12 00:12:31,785 [salt.minion      :1431][INFO    ][18003] Starting a new job with PID 18003
2018-09-12 00:12:31,811 [salt.minion      :1708][INFO    ][18003] Returning information for job: 20180912001231750802
2018-09-12 00:12:41,927 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001241908404
2018-09-12 00:12:41,951 [salt.minion      :1431][INFO    ][18014] Starting a new job with PID 18014
2018-09-12 00:12:41,969 [salt.minion      :1708][INFO    ][18014] Returning information for job: 20180912001241908404
2018-09-12 00:12:42,253 [salt.state       :290 ][INFO    ][11079] {'aodh-notifier': True}
2018-09-12 00:12:42,254 [salt.state       :1941][INFO    ][11079] Completed state [aodh-notifier] at time 00:12:42.254211 duration_in_ms=15202.489
2018-09-12 00:12:42,255 [salt.state       :1770][INFO    ][11079] Running state [aodh-listener] at time 00:12:42.255051
2018-09-12 00:12:42,255 [salt.state       :1803][INFO    ][11079] Executing state service.running for [aodh-listener]
2018-09-12 00:12:42,260 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-09-12 00:12:42,284 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-09-12 00:12:42,302 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-09-12 00:12:42,316 [salt.state       :290 ][INFO    ][11079] The service aodh-listener is already running
2018-09-12 00:12:42,316 [salt.state       :1941][INFO    ][11079] Completed state [aodh-listener] at time 00:12:42.316443 duration_in_ms=61.391
2018-09-12 00:12:42,316 [salt.state       :1770][INFO    ][11079] Running state [aodh-listener] at time 00:12:42.316698
2018-09-12 00:12:42,317 [salt.state       :1803][INFO    ][11079] Executing state service.mod_watch for [aodh-listener]
2018-09-12 00:12:42,317 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-09-12 00:12:42,332 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11079] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-09-12 00:12:52,086 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001252067681
2018-09-12 00:12:52,107 [salt.minion      :1431][INFO    ][18082] Starting a new job with PID 18082
2018-09-12 00:12:52,126 [salt.minion      :1708][INFO    ][18082] Returning information for job: 20180912001252067681
2018-09-12 00:12:57,503 [salt.state       :290 ][INFO    ][11079] {'aodh-listener': True}
2018-09-12 00:12:57,504 [salt.state       :1941][INFO    ][11079] Completed state [aodh-listener] at time 00:12:57.504548 duration_in_ms=15187.85
2018-09-12 00:12:57,509 [salt.minion      :1708][INFO    ][11079] Returning information for job: 20180912001125780795
2018-09-12 00:14:29,804 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command state.sls with jid 20180912001429788425
2018-09-12 00:14:29,827 [salt.minion      :1431][INFO    ][18134] Starting a new job with PID 18134
2018-09-12 00:14:33,532 [salt.state       :905 ][INFO    ][18134] Loading fresh modules for state activity
2018-09-12 00:14:33,580 [salt.fileclient  :1215][INFO    ][18134] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-09-12 00:14:33,607 [salt.fileclient  :1215][INFO    ][18134] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-09-12 00:14:34,865 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001434846177
2018-09-12 00:14:34,888 [salt.minion      :1431][INFO    ][18147] Starting a new job with PID 18147
2018-09-12 00:14:34,911 [salt.minion      :1708][INFO    ][18147] Returning information for job: 20180912001434846177
2018-09-12 00:14:35,249 [salt.state       :1770][INFO    ][18134] Running state [ceilometer-agent-central] at time 00:14:35.249672
2018-09-12 00:14:35,250 [salt.state       :1803][INFO    ][18134] Executing state pkg.installed for [ceilometer-agent-central]
2018-09-12 00:14:35,251 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:14:35,696 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-09-12 00:14:35,801 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-12 00:14:37,549 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:14:37,582 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-09-12 00:14:45,068 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001445049352
2018-09-12 00:14:45,089 [salt.minion      :1431][INFO    ][18609] Starting a new job with PID 18609
2018-09-12 00:14:45,144 [salt.minion      :1708][INFO    ][18609] Returning information for job: 20180912001445049352
2018-09-12 00:14:55,107 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001455088546
2018-09-12 00:14:55,132 [salt.minion      :1431][INFO    ][18843] Starting a new job with PID 18843
2018-09-12 00:14:55,152 [salt.minion      :1708][INFO    ][18843] Returning information for job: 20180912001455088546
2018-09-12 00:15:05,315 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001505296368
2018-09-12 00:15:05,342 [salt.minion      :1431][INFO    ][19089] Starting a new job with PID 19089
2018-09-12 00:15:05,368 [salt.minion      :1708][INFO    ][19089] Returning information for job: 20180912001505296368
2018-09-12 00:15:15,341 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001515322872
2018-09-12 00:15:15,355 [salt.minion      :1431][INFO    ][20080] Starting a new job with PID 20080
2018-09-12 00:15:15,371 [salt.minion      :1708][INFO    ][20080] Returning information for job: 20180912001515322872
2018-09-12 00:15:25,563 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001525545154
2018-09-12 00:15:25,578 [salt.minion      :1431][INFO    ][20418] Starting a new job with PID 20418
2018-09-12 00:15:25,593 [salt.minion      :1708][INFO    ][20418] Returning information for job: 20180912001525545154
2018-09-12 00:15:32,917 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:15:32,967 [salt.state       :290 ][INFO    ][18134] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0ubuntu2~cloud0'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.3~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.3~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0ubuntu2~cloud0'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'qemu-system-x86-64' changed from 'absent' to '1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python2.7-twisted-core' changed from 'absent' to '1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.3~cloud0'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libflac8' changed from 'absent' to '1.3.1-4'
'librados2' changed from 'absent' to '12.2.4-0ubuntu1~cloud1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.4-0ubuntu1~cloud1'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.4~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-09-12 00:15:32,996 [salt.state       :905 ][INFO    ][18134] Loading fresh modules for state activity
2018-09-12 00:15:33,133 [salt.state       :1941][INFO    ][18134] Completed state [ceilometer-agent-central] at time 00:15:33.133050 duration_in_ms=57883.375
2018-09-12 00:15:33,145 [salt.state       :1770][INFO    ][18134] Running state [python-ceilometerclient] at time 00:15:33.145680
2018-09-12 00:15:33,146 [salt.state       :1803][INFO    ][18134] Executing state pkg.installed for [python-ceilometerclient]
2018-09-12 00:15:33,676 [salt.state       :290 ][INFO    ][18134] All specified packages are already installed
2018-09-12 00:15:33,677 [salt.state       :1941][INFO    ][18134] Completed state [python-ceilometerclient] at time 00:15:33.677246 duration_in_ms=531.568
2018-09-12 00:15:33,677 [salt.state       :1770][INFO    ][18134] Running state [ceilometer-agent-notification] at time 00:15:33.677662
2018-09-12 00:15:33,678 [salt.state       :1803][INFO    ][18134] Executing state pkg.installed for [ceilometer-agent-notification]
2018-09-12 00:15:33,692 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-12 00:15:33,723 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-09-12 00:15:35,782 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001535764004
2018-09-12 00:15:35,805 [salt.minion      :1431][INFO    ][20799] Starting a new job with PID 20799
2018-09-12 00:15:35,823 [salt.minion      :1708][INFO    ][20799] Returning information for job: 20180912001535764004
2018-09-12 00:15:37,281 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-12 00:15:37,315 [salt.state       :290 ][INFO    ][18134] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-09-12 00:15:37,334 [salt.state       :905 ][INFO    ][18134] Loading fresh modules for state activity
2018-09-12 00:15:37,356 [salt.state       :1941][INFO    ][18134] Completed state [ceilometer-agent-notification] at time 00:15:37.356929 duration_in_ms=3679.267
2018-09-12 00:15:37,360 [salt.state       :1770][INFO    ][18134] Running state [/etc/ceilometer/ceilometer.conf] at time 00:15:37.360301
2018-09-12 00:15:37,360 [salt.state       :1803][INFO    ][18134] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-09-12 00:15:37,383 [salt.fileclient  :1215][INFO    ][18134] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-09-12 00:15:37,506 [salt.fileclient  :1215][INFO    ][18134] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-09-12 00:15:37,520 [salt.fileclient  :1215][INFO    ][18134] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-09-12 00:15:37,534 [salt.state       :290 ][INFO    ][18134] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,17 +505,22 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
 
 # Messaging URLs to listen for notifications. Example:
@@ -690,726 +569,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +597,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +635,109 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://10.167.4.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +750,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +785,299 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-09-12 00:15:37,536 [salt.state       :1941][INFO    ][18134] Completed state [/etc/ceilometer/ceilometer.conf] at time 00:15:37.535277 duration_in_ms=174.974
2018-09-12 00:15:37,536 [salt.state       :1770][INFO    ][18134] Running state [/etc/default/ceilometer-agent-central] at time 00:15:37.536611
2018-09-12 00:15:37,536 [salt.state       :1803][INFO    ][18134] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-09-12 00:15:37,553 [salt.fileclient  :1215][INFO    ][18134] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-09-12 00:15:37,558 [salt.state       :290 ][INFO    ][18134] File changed:
New file
2018-09-12 00:15:37,558 [salt.state       :1941][INFO    ][18134] Completed state [/etc/default/ceilometer-agent-central] at time 00:15:37.558729 duration_in_ms=22.117
2018-09-12 00:15:37,559 [salt.state       :1770][INFO    ][18134] Running state [/etc/default/ceilometer-agent-notification] at time 00:15:37.558997
2018-09-12 00:15:37,559 [salt.state       :1803][INFO    ][18134] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-09-12 00:15:37,573 [salt.state       :290 ][INFO    ][18134] File changed:
New file
2018-09-12 00:15:37,573 [salt.state       :1941][INFO    ][18134] Completed state [/etc/default/ceilometer-agent-notification] at time 00:15:37.573847 duration_in_ms=14.85
2018-09-12 00:15:37,577 [salt.state       :1770][INFO    ][18134] Running state [python-gnocchiclient] at time 00:15:37.577517
2018-09-12 00:15:37,577 [salt.state       :1803][INFO    ][18134] Executing state pkg.latest for [python-gnocchiclient]
2018-09-12 00:15:37,588 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-09-12 00:15:37,853 [salt.state       :290 ][INFO    ][18134] Package python-gnocchiclient is already up-to-date
2018-09-12 00:15:37,854 [salt.state       :1941][INFO    ][18134] Completed state [python-gnocchiclient] at time 00:15:37.854081 duration_in_ms=276.564
2018-09-12 00:15:37,854 [salt.state       :1770][INFO    ][18134] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 00:15:37.854790
2018-09-12 00:15:37,855 [salt.state       :1803][INFO    ][18134] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2018-09-12 00:15:37,890 [salt.fileclient  :1215][INFO    ][18134] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gnocchi_resources.yaml'
2018-09-12 00:15:37,908 [salt.state       :290 ][INFO    ][18134] File changed:
New file
2018-09-12 00:15:37,908 [salt.state       :1941][INFO    ][18134] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 00:15:37.908801 duration_in_ms=54.01
2018-09-12 00:15:37,910 [salt.state       :1770][INFO    ][18134] Running state [ceilometer-upgrade] at time 00:15:37.910392
2018-09-12 00:15:37,910 [salt.state       :1803][INFO    ][18134] Executing state cmd.run for [ceilometer-upgrade]
2018-09-12 00:15:37,911 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command 'ceilometer-upgrade' in directory '/root'
2018-09-12 00:15:45,936 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001545918545
2018-09-12 00:15:45,956 [salt.minion      :1431][INFO    ][20985] Starting a new job with PID 20985
2018-09-12 00:15:45,974 [salt.minion      :1708][INFO    ][20985] Returning information for job: 20180912001545918545
2018-09-12 00:15:56,135 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001556117035
2018-09-12 00:15:56,154 [salt.minion      :1431][INFO    ][20991] Starting a new job with PID 20991
2018-09-12 00:15:56,171 [salt.minion      :1708][INFO    ][20991] Returning information for job: 20180912001556117035
2018-09-12 00:16:05,363 [salt.state       :290 ][INFO    ][18134] {'pid': 20966, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-09-12 00:16:05,364 [salt.state       :1941][INFO    ][18134] Completed state [ceilometer-upgrade] at time 00:16:05.364482 duration_in_ms=27454.089
2018-09-12 00:16:05,365 [salt.state       :1770][INFO    ][18134] Running state [/etc/ceilometer/pipeline.yaml] at time 00:16:05.365156
2018-09-12 00:16:05,365 [salt.state       :1803][INFO    ][18134] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-09-12 00:16:05,386 [salt.fileclient  :1215][INFO    ][18134] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-09-12 00:16:05,438 [salt.state       :290 ][INFO    ][18134] File changed:
New file
2018-09-12 00:16:05,438 [salt.state       :1941][INFO    ][18134] Completed state [/etc/ceilometer/pipeline.yaml] at time 00:16:05.438895 duration_in_ms=73.738
2018-09-12 00:16:05,439 [salt.state       :1770][INFO    ][18134] Running state [/etc/ceilometer/event_pipeline.yaml] at time 00:16:05.439276
2018-09-12 00:16:05,439 [salt.state       :1803][INFO    ][18134] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-09-12 00:16:05,455 [salt.fileclient  :1215][INFO    ][18134] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-09-12 00:16:05,500 [salt.state       :290 ][INFO    ][18134] File changed:
New file
2018-09-12 00:16:05,501 [salt.state       :1941][INFO    ][18134] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 00:16:05.501254 duration_in_ms=61.978
2018-09-12 00:16:05,501 [salt.state       :1770][INFO    ][18134] Running state [/etc/ceilometer/event_definitions.yaml] at time 00:16:05.501805
2018-09-12 00:16:05,502 [salt.state       :1803][INFO    ][18134] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-09-12 00:16:05,518 [salt.fileclient  :1215][INFO    ][18134] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-09-12 00:16:05,530 [salt.state       :290 ][INFO    ][18134] File changed:
New file
2018-09-12 00:16:05,530 [salt.state       :1941][INFO    ][18134] Completed state [/etc/ceilometer/event_definitions.yaml] at time 00:16:05.530514 duration_in_ms=28.709
2018-09-12 00:16:05,530 [salt.state       :1770][INFO    ][18134] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 00:16:05.530902
2018-09-12 00:16:05,531 [salt.state       :1803][INFO    ][18134] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-09-12 00:16:05,547 [salt.fileclient  :1215][INFO    ][18134] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-09-12 00:16:05,558 [salt.state       :290 ][INFO    ][18134] File changed:
New file
2018-09-12 00:16:05,558 [salt.state       :1941][INFO    ][18134] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 00:16:05.558798 duration_in_ms=27.896
2018-09-12 00:16:05,946 [salt.state       :1770][INFO    ][18134] Running state [ceilometer-agent-central] at time 00:16:05.946550
2018-09-12 00:16:05,947 [salt.state       :1803][INFO    ][18134] Executing state service.running for [ceilometer-agent-central]
2018-09-12 00:16:05,948 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-09-12 00:16:05,977 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-09-12 00:16:05,994 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-09-12 00:16:06,009 [salt.state       :290 ][INFO    ][18134] The service ceilometer-agent-central is already running
2018-09-12 00:16:06,010 [salt.state       :1941][INFO    ][18134] Completed state [ceilometer-agent-central] at time 00:16:06.010731 duration_in_ms=64.18
2018-09-12 00:16:06,011 [salt.state       :1770][INFO    ][18134] Running state [ceilometer-agent-central] at time 00:16:06.011348
2018-09-12 00:16:06,012 [salt.state       :1803][INFO    ][18134] Executing state service.mod_watch for [ceilometer-agent-central]
2018-09-12 00:16:06,013 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-09-12 00:16:06,032 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-09-12 00:16:06,254 [salt.state       :290 ][INFO    ][18134] {'ceilometer-agent-central': True}
2018-09-12 00:16:06,254 [salt.state       :1941][INFO    ][18134] Completed state [ceilometer-agent-central] at time 00:16:06.254802 duration_in_ms=243.453
2018-09-12 00:16:06,255 [salt.state       :1770][INFO    ][18134] Running state [ceilometer-agent-notification] at time 00:16:06.255642
2018-09-12 00:16:06,255 [salt.state       :1803][INFO    ][18134] Executing state service.running for [ceilometer-agent-notification]
2018-09-12 00:16:06,265 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-09-12 00:16:06,290 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-09-12 00:16:06,305 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-09-12 00:16:06,320 [salt.state       :290 ][INFO    ][18134] The service ceilometer-agent-notification is already running
2018-09-12 00:16:06,320 [salt.state       :1941][INFO    ][18134] Completed state [ceilometer-agent-notification] at time 00:16:06.320417 duration_in_ms=64.775
2018-09-12 00:16:06,320 [salt.state       :1770][INFO    ][18134] Running state [ceilometer-agent-notification] at time 00:16:06.320680
2018-09-12 00:16:06,321 [salt.state       :1803][INFO    ][18134] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-09-12 00:16:06,321 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-09-12 00:16:06,333 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command saltutil.find_job with jid 20180912001606315629
2018-09-12 00:16:06,338 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18134] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-09-12 00:16:06,363 [salt.minion      :1431][INFO    ][21061] Starting a new job with PID 21061
2018-09-12 00:16:06,411 [salt.minion      :1708][INFO    ][21061] Returning information for job: 20180912001606315629
2018-09-12 00:16:06,508 [salt.state       :290 ][INFO    ][18134] {'ceilometer-agent-notification': True}
2018-09-12 00:16:06,509 [salt.state       :1941][INFO    ][18134] Completed state [ceilometer-agent-notification] at time 00:16:06.509352 duration_in_ms=188.671
2018-09-12 00:16:06,511 [salt.minion      :1708][INFO    ][18134] Returning information for job: 20180912001429788425
2018-09-12 00:22:42,569 [salt.minion      :1307][INFO    ][3184] User sudo_ubuntu Executing command cp.push_dir with jid 20180912002242548586
2018-09-12 00:22:42,591 [salt.minion      :1431][INFO    ][21157] Starting a new job with PID 21157
