2018-06-05 21:57:12,949 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:12,954 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:12,958 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:13,085 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:13,090 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:13,094 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:13,099 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:13,578 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:13,583 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:13,588 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:13,593 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:13,655 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:57:14,232 [salt.utils.decorators][ERROR   ][1838] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-06-05 21:58:09,781 [salt.loaded.int.module.cmdmod][ERROR   ][1838] Command 'while true; do salt-call saltutil.running|grep fun: && continue; salt-call --local service.restart salt-minion; break; done' failed with return code: None
2018-06-05 21:58:14,859 [salt.loaded.int.module.cmdmod][INFO    ][2600] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-06-05 21:58:14,881 [salt.loaded.int.module.cmdmod][INFO    ][2600] Executing command ['systemctl', 'is-enabled', 'salt-minion.service'] in directory '/root'
2018-06-05 21:58:14,911 [salt.loaded.int.module.cmdmod][INFO    ][2600] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-06-05 21:58:14,943 [salt.utils.parsers][WARNING ][1556] Minion received a SIGTERM. Exiting.
2018-06-05 21:58:15,835 [salt.cli.daemons ][INFO    ][2682] Setting up the Salt Minion "mdb03.mcp-pike-ovs-ha.local"
2018-06-05 21:58:16,041 [salt.cli.daemons ][INFO    ][2682] Starting up the Salt Minion
2018-06-05 21:58:16,042 [salt.utils.event ][INFO    ][2682] Starting pull socket on /var/run/salt/minion/minion_event_2f4872e562_pull.ipc
2018-06-05 21:58:16,995 [salt.minion      ][INFO    ][2682] Creating minion process manager
2018-06-05 21:58:18,658 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][2682] Executing command ['date', '+%z'] in directory '/root'
2018-06-05 21:58:18,700 [salt.utils.schedule][INFO    ][2682] Updating job settings for scheduled job: __mine_interval
2018-06-05 21:58:18,722 [salt.minion      ][INFO    ][2682] Added mine.update to scheduler
2018-06-05 21:58:18,738 [salt.minion      ][INFO    ][2682] Minion is starting as user 'root'
2018-06-05 21:58:18,772 [salt.minion      ][INFO    ][2682] Minion is ready to receive requests!
2018-06-05 21:58:19,775 [salt.utils.schedule][INFO    ][2682] Running scheduled job: __mine_interval
2018-06-05 21:59:44,792 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command state.apply with jid 20180605215944776908
2018-06-05 21:59:44,833 [salt.minion      ][INFO    ][2788] Starting a new job with PID 2788
2018-06-05 21:59:47,962 [salt.state       ][INFO    ][2788] Loading fresh modules for state activity
2018-06-05 21:59:48,061 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-06-05 21:59:48,100 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-06-05 21:59:48,333 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-06-05 21:59:48,565 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-06-05 21:59:48,754 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-06-05 21:59:49,424 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-06-05 21:59:49,658 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-06-05 21:59:49,869 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-06-05 21:59:50,844 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-06-05 21:59:51,022 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-06-05 21:59:51,203 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-06-05 21:59:51,377 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-06-05 21:59:51,606 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-06-05 21:59:51,788 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-06-05 21:59:51,952 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-06-05 21:59:52,451 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-06-05 21:59:52,641 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-06-05 21:59:52,836 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-06-05 21:59:53,089 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-06-05 21:59:53,407 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-06-05 21:59:53,781 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-06-05 21:59:53,962 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-06-05 21:59:54,155 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-06-05 21:59:54,176 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-06-05 21:59:54,246 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-06-05 21:59:54,309 [salt.state       ][INFO    ][2788] Running state [/etc/environment] at time 21:59:54.309549
2018-06-05 21:59:54,310 [salt.state       ][INFO    ][2788] Executing state file.blockreplace for /etc/environment
2018-06-05 21:59:54,321 [salt.state       ][INFO    ][2788] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# +# SALT MANAGED VARIABLES - END

2018-06-05 21:59:54,323 [salt.state       ][INFO    ][2788] Completed state [/etc/environment] at time 21:59:54.323821 duration_in_ms=14.273
2018-06-05 21:59:54,324 [salt.state       ][INFO    ][2788] Running state [/etc/profile.d] at time 21:59:54.324400
2018-06-05 21:59:54,325 [salt.state       ][INFO    ][2788] Executing state file.directory for /etc/profile.d
2018-06-05 21:59:54,333 [salt.state       ][INFO    ][2788] Directory /etc/profile.d is in the correct state
2018-06-05 21:59:54,334 [salt.state       ][INFO    ][2788] Completed state [/etc/profile.d] at time 21:59:54.334435 duration_in_ms=10.035
2018-06-05 21:59:54,866 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605215954854873
2018-06-05 21:59:54,909 [salt.minion      ][INFO    ][2843] Starting a new job with PID 2843
2018-06-05 21:59:54,927 [salt.minion      ][INFO    ][2843] Returning information for job: 20180605215954854873
2018-06-05 21:59:55,117 [salt.state       ][INFO    ][2788] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 21:59:55.117478
2018-06-05 21:59:55,117 [salt.state       ][INFO    ][2788] Executing state file.managed for /etc/apt/apt.conf.d/99prefer_ipv4-salt
2018-06-05 21:59:55,148 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-06-05 21:59:55,161 [salt.state       ][INFO    ][2788] File changed:
New file
2018-06-05 21:59:55,161 [salt.state       ][INFO    ][2788] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 21:59:55.161269 duration_in_ms=43.792
2018-06-05 21:59:55,163 [salt.state       ][INFO    ][2788] Running state [linux_repo_prereq_pkgs] at time 21:59:55.162949
2018-06-05 21:59:55,163 [salt.state       ][INFO    ][2788] Executing state pkg.installed for linux_repo_prereq_pkgs
2018-06-05 21:59:55,164 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 21:59:55,851 [salt.state       ][INFO    ][2788] All specified packages are already installed
2018-06-05 21:59:55,852 [salt.state       ][INFO    ][2788] Completed state [linux_repo_prereq_pkgs] at time 21:59:55.852449 duration_in_ms=689.501
2018-06-05 21:59:55,853 [salt.state       ][INFO    ][2788] Running state [/etc/apt/apt.conf.d/99proxies-salt-mk_openstack] at time 21:59:55.853169
2018-06-05 21:59:55,853 [salt.state       ][INFO    ][2788] Executing state file.absent for /etc/apt/apt.conf.d/99proxies-salt-mk_openstack
2018-06-05 21:59:55,854 [salt.state       ][INFO    ][2788] File /etc/apt/apt.conf.d/99proxies-salt-mk_openstack is not present
2018-06-05 21:59:55,855 [salt.state       ][INFO    ][2788] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mk_openstack] at time 21:59:55.855098 duration_in_ms=1.929
2018-06-05 21:59:55,855 [salt.state       ][INFO    ][2788] Running state [/etc/apt/preferences.d/mk_openstack] at time 21:59:55.855633
2018-06-05 21:59:55,856 [salt.state       ][INFO    ][2788] Executing state file.managed for /etc/apt/preferences.d/mk_openstack
2018-06-05 21:59:55,881 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-06-05 21:59:56,028 [salt.state       ][INFO    ][2788] File changed:
New file
2018-06-05 21:59:56,029 [salt.state       ][INFO    ][2788] Completed state [/etc/apt/preferences.d/mk_openstack] at time 21:59:56.029348 duration_in_ms=173.715
2018-06-05 21:59:56,031 [salt.state       ][INFO    ][2788] Running state [curl -s http://apt.mirantis.com/public.gpg | apt-key add -] at time 21:59:56.031387
2018-06-05 21:59:56,031 [salt.state       ][INFO    ][2788] Executing state cmd.run for curl -s http://apt.mirantis.com/public.gpg | apt-key add -
2018-06-05 21:59:56,033 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'curl -s http://apt.mirantis.com/public.gpg | apt-key add -' in directory '/root'
2018-06-05 21:59:56,429 [salt.state       ][INFO    ][2788] {'pid': 2853, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-06-05 21:59:56,430 [salt.state       ][INFO    ][2788] Completed state [curl -s http://apt.mirantis.com/public.gpg | apt-key add -] at time 21:59:56.430486 duration_in_ms=399.098
2018-06-05 21:59:56,442 [salt.state       ][INFO    ][2788] Running state [deb [arch=amd64] http://apt.mirantis.com/xenial/ nightly pike] at time 21:59:56.442776
2018-06-05 21:59:56,443 [salt.state       ][INFO    ][2788] Executing state pkgrepo.managed for deb [arch=amd64] http://apt.mirantis.com/xenial/ nightly pike
2018-06-05 21:59:56,630 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 22:00:03,692 [salt.state       ][INFO    ][2788] {'repo': 'deb [arch=amd64] http://apt.mirantis.com/xenial nightly pike'}
2018-06-05 22:00:03,693 [salt.state       ][INFO    ][2788] Completed state [deb [arch=amd64] http://apt.mirantis.com/xenial/ nightly pike] at time 22:00:03.693451 duration_in_ms=7250.674
2018-06-05 22:00:03,694 [salt.state       ][INFO    ][2788] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 22:00:03.694464
2018-06-05 22:00:03,695 [salt.state       ][INFO    ][2788] Executing state file.absent for /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack
2018-06-05 22:00:03,696 [salt.state       ][INFO    ][2788] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-06-05 22:00:03,697 [salt.state       ][INFO    ][2788] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 22:00:03.697220 duration_in_ms=2.756
2018-06-05 22:00:03,698 [salt.state       ][INFO    ][2788] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 22:00:03.698072
2018-06-05 22:00:03,698 [salt.state       ][INFO    ][2788] Executing state file.managed for /etc/apt/preferences.d/mirantis_openstack
2018-06-05 22:00:03,882 [salt.state       ][INFO    ][2788] File changed:
New file
2018-06-05 22:00:03,883 [salt.state       ][INFO    ][2788] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 22:00:03.883685 duration_in_ms=185.614
2018-06-05 22:00:03,884 [salt.state       ][INFO    ][2788] Running state [curl -s http://mirror.fuel-infra.org/mcp-repos/pike/xenial/archive-mcppike.key | apt-key add -] at time 22:00:03.884276
2018-06-05 22:00:03,884 [salt.state       ][INFO    ][2788] Executing state cmd.run for curl -s http://mirror.fuel-infra.org/mcp-repos/pike/xenial/archive-mcppike.key | apt-key add -
2018-06-05 22:00:03,886 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'curl -s http://mirror.fuel-infra.org/mcp-repos/pike/xenial/archive-mcppike.key | apt-key add -' in directory '/root'
2018-06-05 22:00:04,129 [salt.state       ][INFO    ][2788] {'pid': 3286, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-06-05 22:00:04,130 [salt.state       ][INFO    ][2788] Completed state [curl -s http://mirror.fuel-infra.org/mcp-repos/pike/xenial/archive-mcppike.key | apt-key add -] at time 22:00:04.129959 duration_in_ms=245.683
2018-06-05 22:00:04,132 [salt.state       ][INFO    ][2788] Running state [deb http://mirror.fuel-infra.org/mcp-repos/pike/xenial pike main] at time 22:00:04.132215
2018-06-05 22:00:04,132 [salt.state       ][INFO    ][2788] Executing state pkgrepo.managed for deb http://mirror.fuel-infra.org/mcp-repos/pike/xenial pike main
2018-06-05 22:00:04,295 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 22:00:04,939 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220004924210
2018-06-05 22:00:04,962 [salt.minion      ][INFO    ][3571] Starting a new job with PID 3571
2018-06-05 22:00:04,986 [salt.minion      ][INFO    ][3571] Returning information for job: 20180605220004924210
2018-06-05 22:00:12,801 [salt.state       ][INFO    ][2788] {'repo': 'deb http://mirror.fuel-infra.org/mcp-repos/pike/xenial pike main'}
2018-06-05 22:00:12,802 [salt.state       ][INFO    ][2788] Completed state [deb http://mirror.fuel-infra.org/mcp-repos/pike/xenial pike main] at time 22:00:12.802050 duration_in_ms=8669.832
2018-06-05 22:00:12,802 [salt.state       ][INFO    ][2788] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 22:00:12.802762
2018-06-05 22:00:12,803 [salt.state       ][INFO    ][2788] Executing state file.absent for /etc/apt/apt.conf.d/99proxies-salt-uca
2018-06-05 22:00:12,804 [salt.state       ][INFO    ][2788] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-06-05 22:00:12,805 [salt.state       ][INFO    ][2788] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 22:00:12.805291 duration_in_ms=2.53
2018-06-05 22:00:12,806 [salt.state       ][INFO    ][2788] Running state [/etc/apt/preferences.d/uca] at time 22:00:12.806376
2018-06-05 22:00:12,807 [salt.state       ][INFO    ][2788] Executing state file.absent for /etc/apt/preferences.d/uca
2018-06-05 22:00:12,808 [salt.state       ][INFO    ][2788] File /etc/apt/preferences.d/uca is not present
2018-06-05 22:00:12,809 [salt.state       ][INFO    ][2788] Completed state [/etc/apt/preferences.d/uca] at time 22:00:12.809271 duration_in_ms=2.895
2018-06-05 22:00:12,810 [salt.state       ][INFO    ][2788] Running state [apt-key adv --keyserver keyserver.ubuntu.com --recv EC4926EA] at time 22:00:12.810280
2018-06-05 22:00:12,811 [salt.state       ][INFO    ][2788] Executing state cmd.run for apt-key adv --keyserver keyserver.ubuntu.com --recv EC4926EA
2018-06-05 22:00:12,813 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'apt-key adv --keyserver keyserver.ubuntu.com --recv EC4926EA' in directory '/root'
2018-06-05 22:00:13,427 [salt.state       ][INFO    ][2788] {'pid': 3768, 'retcode': 0, 'stderr': 'gpg: requesting key EC4926EA from hkp server keyserver.ubuntu.com\ngpg: key EC4926EA: public key "Canonical Cloud Archive Signing Key <ftpmaster@canonical.com>" imported\ngpg: Total number processed: 1\ngpg:               imported: 1  (RSA: 1)', 'stdout': 'Executing: /tmp/tmp.VJdvzf4bkL/gpg.1.sh --keyserver\nkeyserver.ubuntu.com\n--recv\nEC4926EA'}
2018-06-05 22:00:13,428 [salt.state       ][INFO    ][2788] Completed state [apt-key adv --keyserver keyserver.ubuntu.com --recv EC4926EA] at time 22:00:13.428477 duration_in_ms=618.198
2018-06-05 22:00:13,431 [salt.state       ][INFO    ][2788] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/pike main] at time 22:00:13.431216
2018-06-05 22:00:13,431 [salt.state       ][INFO    ][2788] Executing state pkgrepo.managed for deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/pike main
2018-06-05 22:00:13,560 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 22:00:15,169 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220015151848
2018-06-05 22:00:15,188 [salt.minion      ][INFO    ][4265] Starting a new job with PID 4265
2018-06-05 22:00:15,207 [salt.minion      ][INFO    ][4265] Returning information for job: 20180605220015151848
2018-06-05 22:00:21,592 [salt.state       ][INFO    ][2788] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/pike main'}
2018-06-05 22:00:21,592 [salt.state       ][INFO    ][2788] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/pike main] at time 22:00:21.592529 duration_in_ms=8161.313
2018-06-05 22:00:21,601 [salt.state       ][INFO    ][2788] Running state [UTC] at time 22:00:21.601076
2018-06-05 22:00:21,601 [salt.state       ][INFO    ][2788] Executing state timezone.system for UTC
2018-06-05 22:00:21,602 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['timedatectl'] in directory '/root'
2018-06-05 22:00:21,689 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['timedatectl'] in directory '/root'
2018-06-05 22:00:21,713 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'timedatectl set-timezone UTC' in directory '/root'
2018-06-05 22:00:21,754 [salt.state       ][INFO    ][2788] {'timezone': 'UTC'}
2018-06-05 22:00:21,755 [salt.state       ][INFO    ][2788] Completed state [UTC] at time 22:00:21.755400 duration_in_ms=154.323
2018-06-05 22:00:21,757 [salt.state       ][INFO    ][2788] Running state [nf_conntrack] at time 22:00:21.757043
2018-06-05 22:00:21,757 [salt.state       ][INFO    ][2788] Executing state kmod.present for nf_conntrack
2018-06-05 22:00:21,758 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'lsmod' in directory '/root'
2018-06-05 22:00:23,376 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'lsmod' in directory '/root'
2018-06-05 22:00:23,408 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-06-05 22:00:23,479 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'lsmod' in directory '/root'
2018-06-05 22:00:23,641 [salt.state       ][INFO    ][2788] {'nf_conntrack': 'loaded'}
2018-06-05 22:00:23,642 [salt.state       ][INFO    ][2788] Completed state [nf_conntrack] at time 22:00:23.642508 duration_in_ms=1885.464
2018-06-05 22:00:23,720 [salt.state       ][INFO    ][2788] Running state [kernel.panic] at time 22:00:23.720482
2018-06-05 22:00:23,721 [salt.state       ][INFO    ][2788] Executing state sysctl.present for kernel.panic
2018-06-05 22:00:23,740 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:23,930 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-06-05 22:00:23,952 [salt.state       ][INFO    ][2788] {'kernel.panic': 60}
2018-06-05 22:00:23,953 [salt.state       ][INFO    ][2788] Completed state [kernel.panic] at time 22:00:23.953019 duration_in_ms=232.538
2018-06-05 22:00:23,954 [salt.state       ][INFO    ][2788] Running state [net.ipv4.tcp_keepalive_probes] at time 22:00:23.954005
2018-06-05 22:00:23,954 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.tcp_keepalive_probes
2018-06-05 22:00:23,956 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,012 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-06-05 22:00:24,028 [salt.state       ][INFO    ][2788] {'net.ipv4.tcp_keepalive_probes': 8}
2018-06-05 22:00:24,029 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.tcp_keepalive_probes] at time 22:00:24.029049 duration_in_ms=75.045
2018-06-05 22:00:24,029 [salt.state       ][INFO    ][2788] Running state [fs.file-max] at time 22:00:24.029809
2018-06-05 22:00:24,030 [salt.state       ][INFO    ][2788] Executing state sysctl.present for fs.file-max
2018-06-05 22:00:24,031 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,075 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-06-05 22:00:24,091 [salt.state       ][INFO    ][2788] {'fs.file-max': 124165}
2018-06-05 22:00:24,092 [salt.state       ][INFO    ][2788] Completed state [fs.file-max] at time 22:00:24.092152 duration_in_ms=62.343
2018-06-05 22:00:24,092 [salt.state       ][INFO    ][2788] Running state [net.core.somaxconn] at time 22:00:24.092905
2018-06-05 22:00:24,093 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.core.somaxconn
2018-06-05 22:00:24,094 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,171 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-06-05 22:00:24,187 [salt.state       ][INFO    ][2788] {'net.core.somaxconn': 4096}
2018-06-05 22:00:24,188 [salt.state       ][INFO    ][2788] Completed state [net.core.somaxconn] at time 22:00:24.188173 duration_in_ms=95.268
2018-06-05 22:00:24,189 [salt.state       ][INFO    ][2788] Running state [net.ipv4.tcp_max_syn_backlog] at time 22:00:24.188968
2018-06-05 22:00:24,189 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.tcp_max_syn_backlog
2018-06-05 22:00:24,190 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,249 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-06-05 22:00:24,268 [salt.state       ][INFO    ][2788] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-06-05 22:00:24,269 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.tcp_max_syn_backlog] at time 22:00:24.269184 duration_in_ms=80.216
2018-06-05 22:00:24,270 [salt.state       ][INFO    ][2788] Running state [net.ipv4.tcp_tw_reuse] at time 22:00:24.269960
2018-06-05 22:00:24,270 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.tcp_tw_reuse
2018-06-05 22:00:24,271 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,345 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-06-05 22:00:24,360 [salt.state       ][INFO    ][2788] {'net.ipv4.tcp_tw_reuse': 1}
2018-06-05 22:00:24,361 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.tcp_tw_reuse] at time 22:00:24.361002 duration_in_ms=91.042
2018-06-05 22:00:24,361 [salt.state       ][INFO    ][2788] Running state [net.ipv4.tcp_congestion_control] at time 22:00:24.361759
2018-06-05 22:00:24,362 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.tcp_congestion_control
2018-06-05 22:00:24,363 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,408 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-06-05 22:00:24,518 [salt.state       ][INFO    ][2788] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-06-05 22:00:24,519 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.tcp_congestion_control] at time 22:00:24.519748 duration_in_ms=157.987
2018-06-05 22:00:24,520 [salt.state       ][INFO    ][2788] Running state [net.ipv4.tcp_retries2] at time 22:00:24.520825
2018-06-05 22:00:24,521 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.tcp_retries2
2018-06-05 22:00:24,523 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,574 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-06-05 22:00:24,600 [salt.state       ][INFO    ][2788] {'net.ipv4.tcp_retries2': 5}
2018-06-05 22:00:24,601 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.tcp_retries2] at time 22:00:24.601139 duration_in_ms=80.314
2018-06-05 22:00:24,602 [salt.state       ][INFO    ][2788] Running state [net.core.netdev_max_backlog] at time 22:00:24.602014
2018-06-05 22:00:24,602 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.core.netdev_max_backlog
2018-06-05 22:00:24,604 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,664 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-06-05 22:00:24,683 [salt.state       ][INFO    ][2788] {'net.core.netdev_max_backlog': 261144}
2018-06-05 22:00:24,684 [salt.state       ][INFO    ][2788] Completed state [net.core.netdev_max_backlog] at time 22:00:24.684593 duration_in_ms=82.578
2018-06-05 22:00:24,685 [salt.state       ][INFO    ][2788] Running state [net.ipv4.tcp_slow_start_after_idle] at time 22:00:24.685603
2018-06-05 22:00:24,686 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.tcp_slow_start_after_idle
2018-06-05 22:00:24,688 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,736 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-06-05 22:00:24,753 [salt.state       ][INFO    ][2788] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-06-05 22:00:24,755 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 22:00:24.754905 duration_in_ms=69.301
2018-06-05 22:00:24,755 [salt.state       ][INFO    ][2788] Running state [vm.swappiness] at time 22:00:24.755885
2018-06-05 22:00:24,756 [salt.state       ][INFO    ][2788] Executing state sysctl.present for vm.swappiness
2018-06-05 22:00:24,758 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,805 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-06-05 22:00:24,825 [salt.state       ][INFO    ][2788] {'vm.swappiness': 10}
2018-06-05 22:00:24,825 [salt.state       ][INFO    ][2788] Completed state [vm.swappiness] at time 22:00:24.825873 duration_in_ms=69.989
2018-06-05 22:00:24,826 [salt.state       ][INFO    ][2788] Running state [net.ipv4.tcp_keepalive_intvl] at time 22:00:24.826637
2018-06-05 22:00:24,827 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.tcp_keepalive_intvl
2018-06-05 22:00:24,828 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,874 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-06-05 22:00:24,890 [salt.state       ][INFO    ][2788] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-06-05 22:00:24,891 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.tcp_keepalive_intvl] at time 22:00:24.891018 duration_in_ms=64.38
2018-06-05 22:00:24,891 [salt.state       ][INFO    ][2788] Running state [net.ipv4.neigh.default.gc_thresh1] at time 22:00:24.891764
2018-06-05 22:00:24,892 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.neigh.default.gc_thresh1
2018-06-05 22:00:24,893 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:24,938 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-06-05 22:00:24,955 [salt.state       ][INFO    ][2788] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-06-05 22:00:24,956 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 22:00:24.956351 duration_in_ms=64.586
2018-06-05 22:00:24,957 [salt.state       ][INFO    ][2788] Running state [net.ipv4.neigh.default.gc_thresh2] at time 22:00:24.957124
2018-06-05 22:00:24,957 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.neigh.default.gc_thresh2
2018-06-05 22:00:24,958 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:25,004 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-06-05 22:00:25,021 [salt.state       ][INFO    ][2788] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-06-05 22:00:25,022 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 22:00:25.022085 duration_in_ms=64.961
2018-06-05 22:00:25,022 [salt.state       ][INFO    ][2788] Running state [net.ipv4.neigh.default.gc_thresh3] at time 22:00:25.022816
2018-06-05 22:00:25,023 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.neigh.default.gc_thresh3
2018-06-05 22:00:25,024 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:25,074 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-06-05 22:00:25,092 [salt.state       ][INFO    ][2788] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-06-05 22:00:25,093 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 22:00:25.092998 duration_in_ms=70.181
2018-06-05 22:00:25,093 [salt.state       ][INFO    ][2788] Running state [net.ipv4.tcp_fin_timeout] at time 22:00:25.093763
2018-06-05 22:00:25,094 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.tcp_fin_timeout
2018-06-05 22:00:25,095 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:25,144 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-06-05 22:00:25,160 [salt.state       ][INFO    ][2788] {'net.ipv4.tcp_fin_timeout': 30}
2018-06-05 22:00:25,161 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.tcp_fin_timeout] at time 22:00:25.161297 duration_in_ms=67.533
2018-06-05 22:00:25,162 [salt.state       ][INFO    ][2788] Running state [net.ipv4.tcp_keepalive_time] at time 22:00:25.162213
2018-06-05 22:00:25,163 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.ipv4.tcp_keepalive_time
2018-06-05 22:00:25,164 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:25,210 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-06-05 22:00:25,226 [salt.state       ][INFO    ][2788] {'net.ipv4.tcp_keepalive_time': 30}
2018-06-05 22:00:25,227 [salt.state       ][INFO    ][2788] Completed state [net.ipv4.tcp_keepalive_time] at time 22:00:25.227585 duration_in_ms=65.371
2018-06-05 22:00:25,228 [salt.state       ][INFO    ][2788] Running state [net.nf_conntrack_max] at time 22:00:25.228449
2018-06-05 22:00:25,229 [salt.state       ][INFO    ][2788] Executing state sysctl.present for net.nf_conntrack_max
2018-06-05 22:00:25,230 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:00:25,275 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-06-05 22:00:25,290 [salt.state       ][INFO    ][2788] {'net.nf_conntrack_max': 1048576}
2018-06-05 22:00:25,291 [salt.state       ][INFO    ][2788] Completed state [net.nf_conntrack_max] at time 22:00:25.291574 duration_in_ms=63.124
2018-06-05 22:00:25,292 [salt.state       ][INFO    ][2788] Running state [linux_sysfs_package] at time 22:00:25.292275
2018-06-05 22:00:25,292 [salt.state       ][INFO    ][2788] Executing state pkg.installed for linux_sysfs_package
2018-06-05 22:00:25,327 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-06-05 22:00:25,384 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220025376734
2018-06-05 22:00:25,410 [salt.minion      ][INFO    ][4378] Starting a new job with PID 4378
2018-06-05 22:00:25,413 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 22:00:25,431 [salt.minion      ][INFO    ][4378] Returning information for job: 20180605220025376734
2018-06-05 22:00:29,210 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 22:00:29,254 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-06-05 22:00:35,443 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220035426769
2018-06-05 22:00:35,479 [salt.minion      ][INFO    ][4839] Starting a new job with PID 4839
2018-06-05 22:00:35,504 [salt.minion      ][INFO    ][4839] Returning information for job: 20180605220035426769
2018-06-05 22:00:45,652 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220045635808
2018-06-05 22:00:45,692 [salt.minion      ][INFO    ][5126] Starting a new job with PID 5126
2018-06-05 22:00:45,730 [salt.minion      ][INFO    ][5126] Returning information for job: 20180605220045635808
2018-06-05 22:00:48,633 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:00:48,735 [salt.state       ][INFO    ][2788] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-06-05 22:00:48,799 [salt.state       ][INFO    ][2788] Loading fresh modules for state activity
2018-06-05 22:00:48,884 [salt.state       ][INFO    ][2788] Completed state [linux_sysfs_package] at time 22:00:48.884018 duration_in_ms=23591.739
2018-06-05 22:00:48,898 [salt.state       ][INFO    ][2788] Running state [/etc/sysfs.d] at time 22:00:48.898126
2018-06-05 22:00:48,898 [salt.state       ][INFO    ][2788] Executing state file.directory for /etc/sysfs.d
2018-06-05 22:00:48,908 [salt.state       ][INFO    ][2788] Directory /etc/sysfs.d is in the correct state
2018-06-05 22:00:48,909 [salt.state       ][INFO    ][2788] Completed state [/etc/sysfs.d] at time 22:00:48.908945 duration_in_ms=10.819
2018-06-05 22:00:49,304 [salt.state       ][INFO    ][2788] Running state [ondemand] at time 22:00:49.304815
2018-06-05 22:00:49,305 [salt.state       ][INFO    ][2788] Executing state service.dead for ondemand
2018-06-05 22:00:49,306 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-06-05 22:00:49,326 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-06-05 22:00:49,344 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-06-05 22:00:49,366 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-06-05 22:00:49,459 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-06-05 22:00:49,481 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-06-05 22:00:49,509 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-06-05 22:00:49,536 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-06-05 22:00:49,852 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-06-05 22:00:49,879 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'runlevel' in directory '/root'
2018-06-05 22:00:49,894 [salt.state       ][INFO    ][2788] {'ondemand': True}
2018-06-05 22:00:49,894 [salt.state       ][INFO    ][2788] Completed state [ondemand] at time 22:00:49.894395 duration_in_ms=589.581
2018-06-05 22:00:49,903 [salt.state       ][INFO    ][2788] Running state [cs_CZ.UTF-8] at time 22:00:49.903298
2018-06-05 22:00:49,903 [salt.state       ][INFO    ][2788] Executing state locale.present for cs_CZ.UTF-8
2018-06-05 22:00:49,904 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'locale -a' in directory '/root'
2018-06-05 22:00:49,928 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['locale-gen', 'cs_CZ.utf8'] in directory '/root'
2018-06-05 22:00:51,682 [salt.state       ][INFO    ][2788] {'locale': 'cs_CZ.UTF-8'}
2018-06-05 22:00:51,682 [salt.state       ][INFO    ][2788] Completed state [cs_CZ.UTF-8] at time 22:00:51.682484 duration_in_ms=1779.186
2018-06-05 22:00:51,682 [salt.state       ][INFO    ][2788] Running state [en_US.UTF-8] at time 22:00:51.682886
2018-06-05 22:00:51,683 [salt.state       ][INFO    ][2788] Executing state locale.present for en_US.UTF-8
2018-06-05 22:00:51,684 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'locale -a' in directory '/root'
2018-06-05 22:00:51,697 [salt.state       ][INFO    ][2788] Locale en_US.UTF-8 is already present
2018-06-05 22:00:51,698 [salt.state       ][INFO    ][2788] Completed state [en_US.UTF-8] at time 22:00:51.698001 duration_in_ms=15.115
2018-06-05 22:00:51,700 [salt.state       ][INFO    ][2788] Running state [en_US.UTF-8] at time 22:00:51.700407
2018-06-05 22:00:51,700 [salt.state       ][INFO    ][2788] Executing state locale.system for en_US.UTF-8
2018-06-05 22:00:51,701 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'localectl' in directory '/root'
2018-06-05 22:00:51,832 [salt.state       ][INFO    ][2788] System locale en_US.UTF-8 already set
2018-06-05 22:00:51,832 [salt.state       ][INFO    ][2788] Completed state [en_US.UTF-8] at time 22:00:51.832711 duration_in_ms=132.304
2018-06-05 22:00:51,840 [salt.state       ][INFO    ][2788] Running state [root] at time 22:00:51.839988
2018-06-05 22:00:51,840 [salt.state       ][INFO    ][2788] Executing state group.present for root
2018-06-05 22:00:51,843 [salt.state       ][INFO    ][2788] Group root is present and up to date
2018-06-05 22:00:51,843 [salt.state       ][INFO    ][2788] Completed state [root] at time 22:00:51.843704 duration_in_ms=3.716
2018-06-05 22:00:51,855 [salt.state       ][INFO    ][2788] Running state [root] at time 22:00:51.855717
2018-06-05 22:00:51,856 [salt.state       ][INFO    ][2788] Executing state user.present for root
2018-06-05 22:00:51,857 [salt.state       ][INFO    ][2788] User root is present and up to date
2018-06-05 22:00:51,857 [salt.state       ][INFO    ][2788] Completed state [root] at time 22:00:51.857812 duration_in_ms=2.095
2018-06-05 22:00:51,859 [salt.state       ][INFO    ][2788] Running state [/root] at time 22:00:51.859687
2018-06-05 22:00:51,860 [salt.state       ][INFO    ][2788] Executing state file.directory for /root
2018-06-05 22:00:51,860 [salt.state       ][INFO    ][2788] Directory /root is in the correct state
2018-06-05 22:00:51,861 [salt.state       ][INFO    ][2788] Completed state [/root] at time 22:00:51.861078 duration_in_ms=1.391
2018-06-05 22:00:51,861 [salt.state       ][INFO    ][2788] Running state [/etc/sudoers.d/90-salt-user-root] at time 22:00:51.861364
2018-06-05 22:00:51,861 [salt.state       ][INFO    ][2788] Executing state file.absent for /etc/sudoers.d/90-salt-user-root
2018-06-05 22:00:51,861 [salt.state       ][INFO    ][2788] File /etc/sudoers.d/90-salt-user-root is not present
2018-06-05 22:00:51,862 [salt.state       ][INFO    ][2788] Completed state [/etc/sudoers.d/90-salt-user-root] at time 22:00:51.862167 duration_in_ms=0.803
2018-06-05 22:00:51,862 [salt.state       ][INFO    ][2788] Running state [ubuntu] at time 22:00:51.862428
2018-06-05 22:00:51,862 [salt.state       ][INFO    ][2788] Executing state group.present for ubuntu
2018-06-05 22:00:51,863 [salt.state       ][INFO    ][2788] Group ubuntu is present and up to date
2018-06-05 22:00:51,863 [salt.state       ][INFO    ][2788] Completed state [ubuntu] at time 22:00:51.863257 duration_in_ms=0.829
2018-06-05 22:00:51,864 [salt.state       ][INFO    ][2788] Running state [ubuntu] at time 22:00:51.864935
2018-06-05 22:00:51,865 [salt.state       ][INFO    ][2788] Executing state user.present for ubuntu
2018-06-05 22:00:51,869 [salt.state       ][INFO    ][2788] {'passwd': 'XXX-REDACTED-XXX'}
2018-06-05 22:00:51,869 [salt.state       ][INFO    ][2788] Completed state [ubuntu] at time 22:00:51.869654 duration_in_ms=4.719
2018-06-05 22:00:51,871 [salt.state       ][INFO    ][2788] Running state [/home/ubuntu] at time 22:00:51.871501
2018-06-05 22:00:51,871 [salt.state       ][INFO    ][2788] Executing state file.directory for /home/ubuntu
2018-06-05 22:00:51,873 [salt.state       ][INFO    ][2788] {'mode': '0700'}
2018-06-05 22:00:51,873 [salt.state       ][INFO    ][2788] Completed state [/home/ubuntu] at time 22:00:51.873344 duration_in_ms=1.843
2018-06-05 22:00:51,874 [salt.state       ][INFO    ][2788] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 22:00:51.874895
2018-06-05 22:00:51,875 [salt.state       ][INFO    ][2788] Executing state file.managed for /etc/sudoers.d/90-salt-user-ubuntu
2018-06-05 22:00:51,901 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-06-05 22:00:51,906 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command '/usr/sbin/visudo -c -f /tmp/tmpGongE_' in directory '/root'
2018-06-05 22:00:52,038 [salt.state       ][INFO    ][2788] File changed:
New file
2018-06-05 22:00:52,039 [salt.state       ][INFO    ][2788] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 22:00:52.039370 duration_in_ms=164.473
2018-06-05 22:00:52,040 [salt.state       ][INFO    ][2788] Running state [/etc/security/limits.d/90-salt-default.conf] at time 22:00:52.040028
2018-06-05 22:00:52,040 [salt.state       ][INFO    ][2788] Executing state file.managed for /etc/security/limits.d/90-salt-default.conf
2018-06-05 22:00:52,072 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-06-05 22:00:52,249 [salt.state       ][INFO    ][2788] File changed:
New file
2018-06-05 22:00:52,249 [salt.state       ][INFO    ][2788] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 22:00:52.249782 duration_in_ms=209.755
2018-06-05 22:00:52,250 [salt.state       ][INFO    ][2788] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 22:00:52.250078
2018-06-05 22:00:52,250 [salt.state       ][INFO    ][2788] Executing state file.managed for /etc/systemd/system.conf.d/90-salt.conf
2018-06-05 22:00:52,270 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-06-05 22:00:52,421 [salt.state       ][INFO    ][2788] File changed:
New file
2018-06-05 22:00:52,422 [salt.state       ][INFO    ][2788] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 22:00:52.422182 duration_in_ms=172.104
2018-06-05 22:00:52,424 [salt.state       ][INFO    ][2788] Running state [service.systemctl_reload] at time 22:00:52.424637
2018-06-05 22:00:52,424 [salt.state       ][INFO    ][2788] Executing state module.wait for service.systemctl_reload
2018-06-05 22:00:52,425 [salt.state       ][INFO    ][2788] No changes made for service.systemctl_reload
2018-06-05 22:00:52,425 [salt.state       ][INFO    ][2788] Completed state [service.systemctl_reload] at time 22:00:52.425472 duration_in_ms=0.835
2018-06-05 22:00:52,425 [salt.state       ][INFO    ][2788] Running state [service.systemctl_reload] at time 22:00:52.425707
2018-06-05 22:00:52,425 [salt.state       ][INFO    ][2788] Executing state module.mod_watch for service.systemctl_reload
2018-06-05 22:00:52,426 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-06-05 22:00:52,637 [salt.state       ][INFO    ][2788] {'ret': True}
2018-06-05 22:00:52,638 [salt.state       ][INFO    ][2788] Completed state [service.systemctl_reload] at time 22:00:52.638333 duration_in_ms=212.626
2018-06-05 22:00:52,638 [salt.state       ][INFO    ][2788] Running state [/etc/hostname] at time 22:00:52.638823
2018-06-05 22:00:52,639 [salt.state       ][INFO    ][2788] Executing state file.managed for /etc/hostname
2018-06-05 22:00:52,670 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-06-05 22:00:52,675 [salt.state       ][INFO    ][2788] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb03

2018-06-05 22:00:52,676 [salt.state       ][INFO    ][2788] Completed state [/etc/hostname] at time 22:00:52.676030 duration_in_ms=37.207
2018-06-05 22:00:52,679 [salt.state       ][INFO    ][2788] Running state [hostname mdb03] at time 22:00:52.679038
2018-06-05 22:00:52,679 [salt.state       ][INFO    ][2788] Executing state cmd.wait for hostname mdb03
2018-06-05 22:00:52,679 [salt.state       ][INFO    ][2788] No changes made for hostname mdb03
2018-06-05 22:00:52,680 [salt.state       ][INFO    ][2788] Completed state [hostname mdb03] at time 22:00:52.679949 duration_in_ms=0.912
2018-06-05 22:00:52,680 [salt.state       ][INFO    ][2788] Running state [hostname mdb03] at time 22:00:52.680194
2018-06-05 22:00:52,680 [salt.state       ][INFO    ][2788] Executing state cmd.mod_watch for hostname mdb03
2018-06-05 22:00:52,681 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command 'hostname mdb03' in directory '/root'
2018-06-05 22:00:52,698 [salt.state       ][INFO    ][2788] {'pid': 5386, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-06-05 22:00:52,698 [salt.state       ][INFO    ][2788] Completed state [hostname mdb03] at time 22:00:52.698517 duration_in_ms=18.323
2018-06-05 22:00:52,705 [salt.state       ][INFO    ][2788] Running state [mdb02] at time 22:00:52.705597
2018-06-05 22:00:52,705 [salt.state       ][INFO    ][2788] Executing state host.present for mdb02
2018-06-05 22:00:52,707 [salt.state       ][INFO    ][2788] {'host': 'mdb02'}
2018-06-05 22:00:52,707 [salt.state       ][INFO    ][2788] Completed state [mdb02] at time 22:00:52.707625 duration_in_ms=2.029
2018-06-05 22:00:52,707 [salt.state       ][INFO    ][2788] Running state [mdb02.mcp-pike-ovs-ha.local] at time 22:00:52.707939
2018-06-05 22:00:52,708 [salt.state       ][INFO    ][2788] Executing state host.present for mdb02.mcp-pike-ovs-ha.local
2018-06-05 22:00:52,714 [salt.state       ][INFO    ][2788] {'host': 'mdb02.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:52,714 [salt.state       ][INFO    ][2788] Completed state [mdb02.mcp-pike-ovs-ha.local] at time 22:00:52.714399 duration_in_ms=6.46
2018-06-05 22:00:52,714 [salt.state       ][INFO    ][2788] Running state [mdb03] at time 22:00:52.714702
2018-06-05 22:00:52,714 [salt.state       ][INFO    ][2788] Executing state host.present for mdb03
2018-06-05 22:00:52,717 [salt.state       ][INFO    ][2788] {'host': 'mdb03'}
2018-06-05 22:00:52,717 [salt.state       ][INFO    ][2788] Completed state [mdb03] at time 22:00:52.717573 duration_in_ms=2.87
2018-06-05 22:00:52,717 [salt.state       ][INFO    ][2788] Running state [mdb03.mcp-pike-ovs-ha.local] at time 22:00:52.717866
2018-06-05 22:00:52,718 [salt.state       ][INFO    ][2788] Executing state host.present for mdb03.mcp-pike-ovs-ha.local
2018-06-05 22:00:52,723 [salt.state       ][INFO    ][2788] {'host': 'mdb03.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:52,723 [salt.state       ][INFO    ][2788] Completed state [mdb03.mcp-pike-ovs-ha.local] at time 22:00:52.723569 duration_in_ms=5.703
2018-06-05 22:00:52,723 [salt.state       ][INFO    ][2788] Running state [mdb01] at time 22:00:52.723867
2018-06-05 22:00:52,724 [salt.state       ][INFO    ][2788] Executing state host.present for mdb01
2018-06-05 22:00:52,729 [salt.state       ][INFO    ][2788] {'host': 'mdb01'}
2018-06-05 22:00:52,729 [salt.state       ][INFO    ][2788] Completed state [mdb01] at time 22:00:52.729579 duration_in_ms=5.713
2018-06-05 22:00:52,729 [salt.state       ][INFO    ][2788] Running state [mdb01.mcp-pike-ovs-ha.local] at time 22:00:52.729860
2018-06-05 22:00:52,730 [salt.state       ][INFO    ][2788] Executing state host.present for mdb01.mcp-pike-ovs-ha.local
2018-06-05 22:00:52,735 [salt.state       ][INFO    ][2788] {'host': 'mdb01.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:52,735 [salt.state       ][INFO    ][2788] Completed state [mdb01.mcp-pike-ovs-ha.local] at time 22:00:52.735651 duration_in_ms=5.79
2018-06-05 22:00:52,735 [salt.state       ][INFO    ][2788] Running state [mdb] at time 22:00:52.735941
2018-06-05 22:00:52,736 [salt.state       ][INFO    ][2788] Executing state host.present for mdb
2018-06-05 22:00:52,741 [salt.state       ][INFO    ][2788] {'host': 'mdb'}
2018-06-05 22:00:52,741 [salt.state       ][INFO    ][2788] Completed state [mdb] at time 22:00:52.741616 duration_in_ms=5.675
2018-06-05 22:00:52,741 [salt.state       ][INFO    ][2788] Running state [mdb.mcp-pike-ovs-ha.local] at time 22:00:52.741896
2018-06-05 22:00:52,742 [salt.state       ][INFO    ][2788] Executing state host.present for mdb.mcp-pike-ovs-ha.local
2018-06-05 22:00:52,747 [salt.state       ][INFO    ][2788] {'host': 'mdb.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:52,747 [salt.state       ][INFO    ][2788] Completed state [mdb.mcp-pike-ovs-ha.local] at time 22:00:52.747664 duration_in_ms=5.768
2018-06-05 22:00:52,747 [salt.state       ][INFO    ][2788] Running state [cfg01] at time 22:00:52.747948
2018-06-05 22:00:52,748 [salt.state       ][INFO    ][2788] Executing state host.present for cfg01
2018-06-05 22:00:52,753 [salt.state       ][INFO    ][2788] {'host': 'cfg01'}
2018-06-05 22:00:52,753 [salt.state       ][INFO    ][2788] Completed state [cfg01] at time 22:00:52.753669 duration_in_ms=5.721
2018-06-05 22:00:52,753 [salt.state       ][INFO    ][2788] Running state [cfg01.mcp-pike-ovs-ha.local] at time 22:00:52.753957
2018-06-05 22:00:52,754 [salt.state       ][INFO    ][2788] Executing state host.present for cfg01.mcp-pike-ovs-ha.local
2018-06-05 22:00:52,759 [salt.state       ][INFO    ][2788] {'host': 'cfg01.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:52,759 [salt.state       ][INFO    ][2788] Completed state [cfg01.mcp-pike-ovs-ha.local] at time 22:00:52.759674 duration_in_ms=5.717
2018-06-05 22:00:52,760 [salt.state       ][INFO    ][2788] Running state [prx01] at time 22:00:52.759959
2018-06-05 22:00:52,760 [salt.state       ][INFO    ][2788] Executing state host.present for prx01
2018-06-05 22:00:52,765 [salt.state       ][INFO    ][2788] {'host': 'prx01'}
2018-06-05 22:00:52,765 [salt.state       ][INFO    ][2788] Completed state [prx01] at time 22:00:52.765681 duration_in_ms=5.722
2018-06-05 22:00:52,766 [salt.state       ][INFO    ][2788] Running state [prx01.mcp-pike-ovs-ha.local] at time 22:00:52.765975
2018-06-05 22:00:52,766 [salt.state       ][INFO    ][2788] Executing state host.present for prx01.mcp-pike-ovs-ha.local
2018-06-05 22:00:52,771 [salt.state       ][INFO    ][2788] {'host': 'prx01.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:52,771 [salt.state       ][INFO    ][2788] Completed state [prx01.mcp-pike-ovs-ha.local] at time 22:00:52.771704 duration_in_ms=5.729
2018-06-05 22:00:52,772 [salt.state       ][INFO    ][2788] Running state [kvm01] at time 22:00:52.771992
2018-06-05 22:00:52,772 [salt.state       ][INFO    ][2788] Executing state host.present for kvm01
2018-06-05 22:00:52,777 [salt.state       ][INFO    ][2788] {'host': 'kvm01'}
2018-06-05 22:00:52,777 [salt.state       ][INFO    ][2788] Completed state [kvm01] at time 22:00:52.777706 duration_in_ms=5.714
2018-06-05 22:00:52,778 [salt.state       ][INFO    ][2788] Running state [kvm01.mcp-pike-ovs-ha.local] at time 22:00:52.777991
2018-06-05 22:00:52,778 [salt.state       ][INFO    ][2788] Executing state host.present for kvm01.mcp-pike-ovs-ha.local
2018-06-05 22:00:52,873 [salt.state       ][INFO    ][2788] {'host': 'kvm01.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:52,874 [salt.state       ][INFO    ][2788] Completed state [kvm01.mcp-pike-ovs-ha.local] at time 22:00:52.874210 duration_in_ms=96.216
2018-06-05 22:00:52,874 [salt.state       ][INFO    ][2788] Running state [kvm03] at time 22:00:52.874873
2018-06-05 22:00:52,875 [salt.state       ][INFO    ][2788] Executing state host.present for kvm03
2018-06-05 22:00:52,879 [salt.state       ][INFO    ][2788] {'host': 'kvm03'}
2018-06-05 22:00:52,880 [salt.state       ][INFO    ][2788] Completed state [kvm03] at time 22:00:52.880062 duration_in_ms=5.189
2018-06-05 22:00:52,880 [salt.state       ][INFO    ][2788] Running state [kvm03.mcp-pike-ovs-ha.local] at time 22:00:52.880715
2018-06-05 22:00:52,881 [salt.state       ][INFO    ][2788] Executing state host.present for kvm03.mcp-pike-ovs-ha.local
2018-06-05 22:00:52,885 [salt.state       ][INFO    ][2788] {'host': 'kvm03.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:52,886 [salt.state       ][INFO    ][2788] Completed state [kvm03.mcp-pike-ovs-ha.local] at time 22:00:52.885996 duration_in_ms=5.282
2018-06-05 22:00:52,886 [salt.state       ][INFO    ][2788] Running state [kvm02] at time 22:00:52.886590
2018-06-05 22:00:52,887 [salt.state       ][INFO    ][2788] Executing state host.present for kvm02
2018-06-05 22:00:52,891 [salt.state       ][INFO    ][2788] {'host': 'kvm02'}
2018-06-05 22:00:52,892 [salt.state       ][INFO    ][2788] Completed state [kvm02] at time 22:00:52.892052 duration_in_ms=5.462
2018-06-05 22:00:52,892 [salt.state       ][INFO    ][2788] Running state [kvm02.mcp-pike-ovs-ha.local] at time 22:00:52.892788
2018-06-05 22:00:52,893 [salt.state       ][INFO    ][2788] Executing state host.present for kvm02.mcp-pike-ovs-ha.local
2018-06-05 22:00:52,993 [salt.state       ][INFO    ][2788] {'host': 'kvm02.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:52,994 [salt.state       ][INFO    ][2788] Completed state [kvm02.mcp-pike-ovs-ha.local] at time 22:00:52.994232 duration_in_ms=101.443
2018-06-05 22:00:52,995 [salt.state       ][INFO    ][2788] Running state [dbs] at time 22:00:52.995063
2018-06-05 22:00:52,995 [salt.state       ][INFO    ][2788] Executing state host.present for dbs
2018-06-05 22:00:53,001 [salt.state       ][INFO    ][2788] {'host': 'dbs'}
2018-06-05 22:00:53,002 [salt.state       ][INFO    ][2788] Completed state [dbs] at time 22:00:53.002391 duration_in_ms=7.328
2018-06-05 22:00:53,003 [salt.state       ][INFO    ][2788] Running state [dbs.mcp-pike-ovs-ha.local] at time 22:00:53.003138
2018-06-05 22:00:53,003 [salt.state       ][INFO    ][2788] Executing state host.present for dbs.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,007 [salt.state       ][INFO    ][2788] {'host': 'dbs.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,008 [salt.state       ][INFO    ][2788] Completed state [dbs.mcp-pike-ovs-ha.local] at time 22:00:53.008239 duration_in_ms=5.101
2018-06-05 22:00:53,009 [salt.state       ][INFO    ][2788] Running state [prx] at time 22:00:53.008945
2018-06-05 22:00:53,009 [salt.state       ][INFO    ][2788] Executing state host.present for prx
2018-06-05 22:00:53,013 [salt.state       ][INFO    ][2788] {'host': 'prx'}
2018-06-05 22:00:53,014 [salt.state       ][INFO    ][2788] Completed state [prx] at time 22:00:53.014254 duration_in_ms=5.309
2018-06-05 22:00:53,015 [salt.state       ][INFO    ][2788] Running state [prx.mcp-pike-ovs-ha.local] at time 22:00:53.014924
2018-06-05 22:00:53,015 [salt.state       ][INFO    ][2788] Executing state host.present for prx.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,019 [salt.state       ][INFO    ][2788] {'host': 'prx.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,020 [salt.state       ][INFO    ][2788] Completed state [prx.mcp-pike-ovs-ha.local] at time 22:00:53.020259 duration_in_ms=5.334
2018-06-05 22:00:53,021 [salt.state       ][INFO    ][2788] Running state [prx02] at time 22:00:53.020938
2018-06-05 22:00:53,021 [salt.state       ][INFO    ][2788] Executing state host.present for prx02
2018-06-05 22:00:53,079 [salt.state       ][INFO    ][2788] {'host': 'prx02'}
2018-06-05 22:00:53,080 [salt.state       ][INFO    ][2788] Completed state [prx02] at time 22:00:53.080571 duration_in_ms=59.631
2018-06-05 22:00:53,081 [salt.state       ][INFO    ][2788] Running state [prx02.mcp-pike-ovs-ha.local] at time 22:00:53.081721
2018-06-05 22:00:53,082 [salt.state       ][INFO    ][2788] Executing state host.present for prx02.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,086 [salt.state       ][INFO    ][2788] {'host': 'prx02.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,087 [salt.state       ][INFO    ][2788] Completed state [prx02.mcp-pike-ovs-ha.local] at time 22:00:53.086927 duration_in_ms=5.207
2018-06-05 22:00:53,087 [salt.state       ][INFO    ][2788] Running state [msg02] at time 22:00:53.087761
2018-06-05 22:00:53,088 [salt.state       ][INFO    ][2788] Executing state host.present for msg02
2018-06-05 22:00:53,092 [salt.state       ][INFO    ][2788] {'host': 'msg02'}
2018-06-05 22:00:53,093 [salt.state       ][INFO    ][2788] Completed state [msg02] at time 22:00:53.092861 duration_in_ms=5.065
2018-06-05 22:00:53,093 [salt.state       ][INFO    ][2788] Running state [msg02.mcp-pike-ovs-ha.local] at time 22:00:53.093749
2018-06-05 22:00:53,094 [salt.state       ][INFO    ][2788] Executing state host.present for msg02.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,098 [salt.state       ][INFO    ][2788] {'host': 'msg02.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,098 [salt.state       ][INFO    ][2788] Completed state [msg02.mcp-pike-ovs-ha.local] at time 22:00:53.098781 duration_in_ms=5.032
2018-06-05 22:00:53,099 [salt.state       ][INFO    ][2788] Running state [msg03] at time 22:00:53.099583
2018-06-05 22:00:53,100 [salt.state       ][INFO    ][2788] Executing state host.present for msg03
2018-06-05 22:00:53,103 [salt.state       ][INFO    ][2788] {'host': 'msg03'}
2018-06-05 22:00:53,104 [salt.state       ][INFO    ][2788] Completed state [msg03] at time 22:00:53.104430 duration_in_ms=4.846
2018-06-05 22:00:53,105 [salt.state       ][INFO    ][2788] Running state [msg03.mcp-pike-ovs-ha.local] at time 22:00:53.105328
2018-06-05 22:00:53,106 [salt.state       ][INFO    ][2788] Executing state host.present for msg03.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,109 [salt.state       ][INFO    ][2788] {'host': 'msg03.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,110 [salt.state       ][INFO    ][2788] Completed state [msg03.mcp-pike-ovs-ha.local] at time 22:00:53.110361 duration_in_ms=5.032
2018-06-05 22:00:53,111 [salt.state       ][INFO    ][2788] Running state [msg01] at time 22:00:53.111127
2018-06-05 22:00:53,111 [salt.state       ][INFO    ][2788] Executing state host.present for msg01
2018-06-05 22:00:53,116 [salt.state       ][INFO    ][2788] {'host': 'msg01'}
2018-06-05 22:00:53,116 [salt.state       ][INFO    ][2788] Completed state [msg01] at time 22:00:53.116751 duration_in_ms=5.625
2018-06-05 22:00:53,117 [salt.state       ][INFO    ][2788] Running state [msg01.mcp-pike-ovs-ha.local] at time 22:00:53.117499
2018-06-05 22:00:53,118 [salt.state       ][INFO    ][2788] Executing state host.present for msg01.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,121 [salt.state       ][INFO    ][2788] {'host': 'msg01.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,122 [salt.state       ][INFO    ][2788] Completed state [msg01.mcp-pike-ovs-ha.local] at time 22:00:53.122375 duration_in_ms=4.876
2018-06-05 22:00:53,123 [salt.state       ][INFO    ][2788] Running state [msg] at time 22:00:53.123008
2018-06-05 22:00:53,123 [salt.state       ][INFO    ][2788] Executing state host.present for msg
2018-06-05 22:00:53,128 [salt.state       ][INFO    ][2788] {'host': 'msg'}
2018-06-05 22:00:53,128 [salt.state       ][INFO    ][2788] Completed state [msg] at time 22:00:53.128468 duration_in_ms=5.459
2018-06-05 22:00:53,129 [salt.state       ][INFO    ][2788] Running state [msg.mcp-pike-ovs-ha.local] at time 22:00:53.129127
2018-06-05 22:00:53,129 [salt.state       ][INFO    ][2788] Executing state host.present for msg.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,133 [salt.state       ][INFO    ][2788] {'host': 'msg.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,134 [salt.state       ][INFO    ][2788] Completed state [msg.mcp-pike-ovs-ha.local] at time 22:00:53.134339 duration_in_ms=5.212
2018-06-05 22:00:53,135 [salt.state       ][INFO    ][2788] Running state [cfg01] at time 22:00:53.134940
2018-06-05 22:00:53,135 [salt.state       ][INFO    ][2788] Executing state host.present for cfg01
2018-06-05 22:00:53,136 [salt.state       ][INFO    ][2788] Host cfg01 (10.167.4.11) already present
2018-06-05 22:00:53,137 [salt.state       ][INFO    ][2788] Completed state [cfg01] at time 22:00:53.137250 duration_in_ms=2.31
2018-06-05 22:00:53,137 [salt.state       ][INFO    ][2788] Running state [cfg01.mcp-pike-ovs-ha.local] at time 22:00:53.137849
2018-06-05 22:00:53,138 [salt.state       ][INFO    ][2788] Executing state host.present for cfg01.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,139 [salt.state       ][INFO    ][2788] Host cfg01.mcp-pike-ovs-ha.local (10.167.4.11) already present
2018-06-05 22:00:53,140 [salt.state       ][INFO    ][2788] Completed state [cfg01.mcp-pike-ovs-ha.local] at time 22:00:53.140163 duration_in_ms=2.314
2018-06-05 22:00:53,140 [salt.state       ][INFO    ][2788] Running state [cmp002] at time 22:00:53.140761
2018-06-05 22:00:53,141 [salt.state       ][INFO    ][2788] Executing state host.present for cmp002
2018-06-05 22:00:53,144 [salt.state       ][INFO    ][2788] {'host': 'cmp002'}
2018-06-05 22:00:53,145 [salt.state       ][INFO    ][2788] Completed state [cmp002] at time 22:00:53.144949 duration_in_ms=4.188
2018-06-05 22:00:53,145 [salt.state       ][INFO    ][2788] Running state [cmp002.mcp-pike-ovs-ha.local] at time 22:00:53.145583
2018-06-05 22:00:53,146 [salt.state       ][INFO    ][2788] Executing state host.present for cmp002.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,149 [salt.state       ][INFO    ][2788] {'host': 'cmp002.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,149 [salt.state       ][INFO    ][2788] Completed state [cmp002.mcp-pike-ovs-ha.local] at time 22:00:53.149760 duration_in_ms=4.177
2018-06-05 22:00:53,150 [salt.state       ][INFO    ][2788] Running state [cmp001] at time 22:00:53.150328
2018-06-05 22:00:53,150 [salt.state       ][INFO    ][2788] Executing state host.present for cmp001
2018-06-05 22:00:53,155 [salt.state       ][INFO    ][2788] {'host': 'cmp001'}
2018-06-05 22:00:53,155 [salt.state       ][INFO    ][2788] Completed state [cmp001] at time 22:00:53.155581 duration_in_ms=5.253
2018-06-05 22:00:53,156 [salt.state       ][INFO    ][2788] Running state [cmp001.mcp-pike-ovs-ha.local] at time 22:00:53.156143
2018-06-05 22:00:53,156 [salt.state       ][INFO    ][2788] Executing state host.present for cmp001.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,161 [salt.state       ][INFO    ][2788] {'host': 'cmp001.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,161 [salt.state       ][INFO    ][2788] Completed state [cmp001.mcp-pike-ovs-ha.local] at time 22:00:53.161632 duration_in_ms=5.49
2018-06-05 22:00:53,162 [salt.state       ][INFO    ][2788] Running state [dbs01] at time 22:00:53.162183
2018-06-05 22:00:53,162 [salt.state       ][INFO    ][2788] Executing state host.present for dbs01
2018-06-05 22:00:53,167 [salt.state       ][INFO    ][2788] {'host': 'dbs01'}
2018-06-05 22:00:53,167 [salt.state       ][INFO    ][2788] Completed state [dbs01] at time 22:00:53.167589 duration_in_ms=5.406
2018-06-05 22:00:53,168 [salt.state       ][INFO    ][2788] Running state [dbs01.mcp-pike-ovs-ha.local] at time 22:00:53.168129
2018-06-05 22:00:53,168 [salt.state       ][INFO    ][2788] Executing state host.present for dbs01.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,173 [salt.state       ][INFO    ][2788] {'host': 'dbs01.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,173 [salt.state       ][INFO    ][2788] Completed state [dbs01.mcp-pike-ovs-ha.local] at time 22:00:53.173671 duration_in_ms=5.542
2018-06-05 22:00:53,174 [salt.state       ][INFO    ][2788] Running state [dbs02] at time 22:00:53.174188
2018-06-05 22:00:53,174 [salt.state       ][INFO    ][2788] Executing state host.present for dbs02
2018-06-05 22:00:53,179 [salt.state       ][INFO    ][2788] {'host': 'dbs02'}
2018-06-05 22:00:53,179 [salt.state       ][INFO    ][2788] Completed state [dbs02] at time 22:00:53.179654 duration_in_ms=5.466
2018-06-05 22:00:53,180 [salt.state       ][INFO    ][2788] Running state [dbs02.mcp-pike-ovs-ha.local] at time 22:00:53.180172
2018-06-05 22:00:53,180 [salt.state       ][INFO    ][2788] Executing state host.present for dbs02.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,185 [salt.state       ][INFO    ][2788] {'host': 'dbs02.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,185 [salt.state       ][INFO    ][2788] Completed state [dbs02.mcp-pike-ovs-ha.local] at time 22:00:53.185645 duration_in_ms=5.472
2018-06-05 22:00:53,186 [salt.state       ][INFO    ][2788] Running state [dbs03] at time 22:00:53.186151
2018-06-05 22:00:53,186 [salt.state       ][INFO    ][2788] Executing state host.present for dbs03
2018-06-05 22:00:53,299 [salt.state       ][INFO    ][2788] {'host': 'dbs03'}
2018-06-05 22:00:53,300 [salt.state       ][INFO    ][2788] Completed state [dbs03] at time 22:00:53.300222 duration_in_ms=114.068
2018-06-05 22:00:53,301 [salt.state       ][INFO    ][2788] Running state [dbs03.mcp-pike-ovs-ha.local] at time 22:00:53.301323
2018-06-05 22:00:53,302 [salt.state       ][INFO    ][2788] Executing state host.present for dbs03.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,307 [salt.state       ][INFO    ][2788] {'host': 'dbs03.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,308 [salt.state       ][INFO    ][2788] Completed state [dbs03.mcp-pike-ovs-ha.local] at time 22:00:53.308250 duration_in_ms=6.926
2018-06-05 22:00:53,309 [salt.state       ][INFO    ][2788] Running state [mas01] at time 22:00:53.309216
2018-06-05 22:00:53,310 [salt.state       ][INFO    ][2788] Executing state host.present for mas01
2018-06-05 22:00:53,314 [salt.state       ][INFO    ][2788] {'host': 'mas01'}
2018-06-05 22:00:53,314 [salt.state       ][INFO    ][2788] Completed state [mas01] at time 22:00:53.314657 duration_in_ms=5.443
2018-06-05 22:00:53,315 [salt.state       ][INFO    ][2788] Running state [mas01.mcp-pike-ovs-ha.local] at time 22:00:53.315279
2018-06-05 22:00:53,315 [salt.state       ][INFO    ][2788] Executing state host.present for mas01.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,319 [salt.state       ][INFO    ][2788] {'host': 'mas01.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,320 [salt.state       ][INFO    ][2788] Completed state [mas01.mcp-pike-ovs-ha.local] at time 22:00:53.320080 duration_in_ms=4.801
2018-06-05 22:00:53,320 [salt.state       ][INFO    ][2788] Running state [ctl02] at time 22:00:53.320700
2018-06-05 22:00:53,321 [salt.state       ][INFO    ][2788] Executing state host.present for ctl02
2018-06-05 22:00:53,325 [salt.state       ][INFO    ][2788] {'host': 'ctl02'}
2018-06-05 22:00:53,326 [salt.state       ][INFO    ][2788] Completed state [ctl02] at time 22:00:53.326227 duration_in_ms=5.526
2018-06-05 22:00:53,326 [salt.state       ][INFO    ][2788] Running state [ctl02.mcp-pike-ovs-ha.local] at time 22:00:53.326827
2018-06-05 22:00:53,327 [salt.state       ][INFO    ][2788] Executing state host.present for ctl02.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,332 [salt.state       ][INFO    ][2788] {'host': 'ctl02.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,332 [salt.state       ][INFO    ][2788] Completed state [ctl02.mcp-pike-ovs-ha.local] at time 22:00:53.332708 duration_in_ms=5.879
2018-06-05 22:00:53,333 [salt.state       ][INFO    ][2788] Running state [ctl03] at time 22:00:53.333651
2018-06-05 22:00:53,334 [salt.state       ][INFO    ][2788] Executing state host.present for ctl03
2018-06-05 22:00:53,338 [salt.state       ][INFO    ][2788] {'host': 'ctl03'}
2018-06-05 22:00:53,339 [salt.state       ][INFO    ][2788] Completed state [ctl03] at time 22:00:53.339282 duration_in_ms=5.631
2018-06-05 22:00:53,340 [salt.state       ][INFO    ][2788] Running state [ctl03.mcp-pike-ovs-ha.local] at time 22:00:53.339998
2018-06-05 22:00:53,340 [salt.state       ][INFO    ][2788] Executing state host.present for ctl03.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,345 [salt.state       ][INFO    ][2788] {'host': 'ctl03.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,345 [salt.state       ][INFO    ][2788] Completed state [ctl03.mcp-pike-ovs-ha.local] at time 22:00:53.345710 duration_in_ms=5.712
2018-06-05 22:00:53,346 [salt.state       ][INFO    ][2788] Running state [ctl01] at time 22:00:53.346396
2018-06-05 22:00:53,347 [salt.state       ][INFO    ][2788] Executing state host.present for ctl01
2018-06-05 22:00:53,351 [salt.state       ][INFO    ][2788] {'host': 'ctl01'}
2018-06-05 22:00:53,351 [salt.state       ][INFO    ][2788] Completed state [ctl01] at time 22:00:53.351671 duration_in_ms=5.275
2018-06-05 22:00:53,352 [salt.state       ][INFO    ][2788] Running state [ctl01.mcp-pike-ovs-ha.local] at time 22:00:53.352342
2018-06-05 22:00:53,353 [salt.state       ][INFO    ][2788] Executing state host.present for ctl01.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,357 [salt.state       ][INFO    ][2788] {'host': 'ctl01.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,357 [salt.state       ][INFO    ][2788] Completed state [ctl01.mcp-pike-ovs-ha.local] at time 22:00:53.357728 duration_in_ms=5.386
2018-06-05 22:00:53,358 [salt.state       ][INFO    ][2788] Running state [ctl] at time 22:00:53.358360
2018-06-05 22:00:53,358 [salt.state       ][INFO    ][2788] Executing state host.present for ctl
2018-06-05 22:00:53,362 [salt.state       ][INFO    ][2788] {'host': 'ctl'}
2018-06-05 22:00:53,363 [salt.state       ][INFO    ][2788] Completed state [ctl] at time 22:00:53.363384 duration_in_ms=5.023
2018-06-05 22:00:53,364 [salt.state       ][INFO    ][2788] Running state [ctl.mcp-pike-ovs-ha.local] at time 22:00:53.364015
2018-06-05 22:00:53,364 [salt.state       ][INFO    ][2788] Executing state host.present for ctl.mcp-pike-ovs-ha.local
2018-06-05 22:00:53,439 [salt.state       ][INFO    ][2788] {'host': 'ctl.mcp-pike-ovs-ha.local'}
2018-06-05 22:00:53,440 [salt.state       ][INFO    ][2788] Completed state [ctl.mcp-pike-ovs-ha.local] at time 22:00:53.439989 duration_in_ms=75.973
2018-06-05 22:00:53,440 [salt.state       ][INFO    ][2788] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 22:00:53.440672
2018-06-05 22:00:53,441 [salt.state       ][INFO    ][2788] Executing state file.absent for /etc/network/interfaces.d/50-cloud-init.cfg
2018-06-05 22:00:53,442 [salt.state       ][INFO    ][2788] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-06-05 22:00:53,443 [salt.state       ][INFO    ][2788] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 22:00:53.442961 duration_in_ms=2.29
2018-06-05 22:00:53,494 [salt.state       ][INFO    ][2788] Running state [ens2] at time 22:00:53.494653
2018-06-05 22:00:53,495 [salt.state       ][INFO    ][2788] Executing state network.managed for ens2
2018-06-05 22:00:54,157 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['ifdown', 'ens2'] in directory '/root'
2018-06-05 22:00:55,702 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220055675083
2018-06-05 22:00:55,742 [salt.minion      ][INFO    ][5408] Starting a new job with PID 5408
2018-06-05 22:00:55,784 [salt.minion      ][INFO    ][5408] Returning information for job: 20180605220055675083
2018-06-05 22:00:55,999 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['ifup', 'ens2'] in directory '/root'
2018-06-05 22:00:57,449 [salt.state       ][INFO    ][2788] {'interface': 'Added network interface.', 'status': 'Interface ens2 restart to validate'}
2018-06-05 22:00:57,450 [salt.state       ][INFO    ][2788] Completed state [ens2] at time 22:00:57.450725 duration_in_ms=3956.074
2018-06-05 22:00:57,451 [salt.state       ][INFO    ][2788] Running state [ens3] at time 22:00:57.451491
2018-06-05 22:00:57,452 [salt.state       ][INFO    ][2788] Executing state network.managed for ens3
2018-06-05 22:00:57,495 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['ifup', 'ens3'] in directory '/root'
2018-06-05 22:00:58,493 [salt.state       ][INFO    ][2788] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-06-05 22:00:58,494 [salt.state       ][INFO    ][2788] Completed state [ens3] at time 22:00:58.493933 duration_in_ms=1042.441
2018-06-05 22:00:58,494 [salt.state       ][INFO    ][2788] Running state [/etc/profile.d/proxy.sh] at time 22:00:58.494404
2018-06-05 22:00:58,494 [salt.state       ][INFO    ][2788] Executing state file.absent for /etc/profile.d/proxy.sh
2018-06-05 22:00:58,495 [salt.state       ][INFO    ][2788] File /etc/profile.d/proxy.sh is not present
2018-06-05 22:00:58,495 [salt.state       ][INFO    ][2788] Completed state [/etc/profile.d/proxy.sh] at time 22:00:58.495736 duration_in_ms=1.333
2018-06-05 22:00:58,496 [salt.state       ][INFO    ][2788] Running state [/etc/apt/apt.conf.d/95proxies] at time 22:00:58.496079
2018-06-05 22:00:58,496 [salt.state       ][INFO    ][2788] Executing state file.absent for /etc/apt/apt.conf.d/95proxies
2018-06-05 22:00:58,496 [salt.state       ][INFO    ][2788] File /etc/apt/apt.conf.d/95proxies is not present
2018-06-05 22:00:58,497 [salt.state       ][INFO    ][2788] Completed state [/etc/apt/apt.conf.d/95proxies] at time 22:00:58.497182 duration_in_ms=1.102
2018-06-05 22:00:58,499 [salt.state       ][INFO    ][2788] Running state [ntp] at time 22:00:58.499082
2018-06-05 22:00:58,499 [salt.state       ][INFO    ][2788] Executing state pkg.installed for ntp
2018-06-05 22:00:58,794 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 22:00:58,850 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-06-05 22:01:05,843 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220105827003
2018-06-05 22:01:05,879 [salt.minion      ][INFO    ][5886] Starting a new job with PID 5886
2018-06-05 22:01:05,917 [salt.minion      ][INFO    ][5886] Returning information for job: 20180605220105827003
2018-06-05 22:01:14,410 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:01:14,513 [salt.state       ][INFO    ][2788] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.8'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-06-05 22:01:14,542 [salt.state       ][INFO    ][2788] Loading fresh modules for state activity
2018-06-05 22:01:14,597 [salt.state       ][INFO    ][2788] Completed state [ntp] at time 22:01:14.597587 duration_in_ms=16098.503
2018-06-05 22:01:14,605 [salt.state       ][INFO    ][2788] Running state [/etc/ntp.conf] at time 22:01:14.605270
2018-06-05 22:01:14,606 [salt.state       ][INFO    ][2788] Executing state file.managed for /etc/ntp.conf
2018-06-05 22:01:14,638 [salt.fileclient  ][INFO    ][2788] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-06-05 22:01:14,756 [salt.state       ][INFO    ][2788] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.pool.ntp.org iburst
+server 0.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod notrap nomodify nopeer noquery
+restrict -6 default kod notrap nomodify nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-06-05 22:01:14,757 [salt.state       ][INFO    ][2788] Completed state [/etc/ntp.conf] at time 22:01:14.757148 duration_in_ms=151.878
2018-06-05 22:01:15,062 [salt.state       ][INFO    ][2788] Running state [ntp] at time 22:01:15.062815
2018-06-05 22:01:15,063 [salt.state       ][INFO    ][2788] Executing state service.running for ntp
2018-06-05 22:01:15,063 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-06-05 22:01:15,083 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-06-05 22:01:15,102 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-06-05 22:01:15,126 [salt.state       ][INFO    ][2788] The service ntp is already running
2018-06-05 22:01:15,126 [salt.state       ][INFO    ][2788] Completed state [ntp] at time 22:01:15.126420 duration_in_ms=63.606
2018-06-05 22:01:15,126 [salt.state       ][INFO    ][2788] Running state [ntp] at time 22:01:15.126732
2018-06-05 22:01:15,127 [salt.state       ][INFO    ][2788] Executing state service.mod_watch for ntp
2018-06-05 22:01:15,127 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-06-05 22:01:15,144 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-06-05 22:01:15,165 [salt.loaded.int.module.cmdmod][INFO    ][2788] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-06-05 22:01:15,278 [salt.state       ][INFO    ][2788] {'ntp': True}
2018-06-05 22:01:15,279 [salt.state       ][INFO    ][2788] Completed state [ntp] at time 22:01:15.279126 duration_in_ms=152.393
2018-06-05 22:01:15,298 [salt.minion      ][INFO    ][2788] Returning information for job: 20180605215944776908
2018-06-05 22:01:36,301 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20180605220136295437
2018-06-05 22:01:36,343 [salt.minion      ][INFO    ][6629] Starting a new job with PID 6629
2018-06-05 22:01:36,370 [salt.loader.192.168.11.2.int.module.ssh][WARNING ][6629] Public Key hashing currently defaults to "md5". This will change to "sha256" in the Nitrogen release.
2018-06-05 22:01:36,376 [salt.minion      ][INFO    ][6629] Returning information for job: 20180605220136295437
2018-06-05 22:02:07,052 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20180605220207049345
2018-06-05 22:02:07,094 [salt.minion      ][INFO    ][6634] Starting a new job with PID 6634
2018-06-05 22:02:07,121 [salt.loader.192.168.11.2.int.module.ssh][WARNING ][6634] Public Key hashing currently defaults to "md5". This will change to "sha256" in the Nitrogen release.
2018-06-05 22:02:07,125 [salt.loader.192.168.11.2.int.module.ssh][WARNING ][6634] Public Key hashing currently defaults to "md5". This will change to "sha256" in the Nitrogen release.
2018-06-05 22:02:07,126 [salt.minion      ][INFO    ][6634] Returning information for job: 20180605220207049345
2018-06-05 22:03:04,509 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command pkg.upgrade with jid 20180605220304494633
2018-06-05 22:03:04,548 [salt.minion      ][INFO    ][6639] Starting a new job with PID 6639
2018-06-05 22:03:04,603 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][6639] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:03:05,393 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][6639] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'upgrade'] in directory '/root'
2018-06-05 22:03:14,611 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220314593910
2018-06-05 22:03:14,655 [salt.minion      ][INFO    ][6726] Starting a new job with PID 6726
2018-06-05 22:03:15,115 [salt.minion      ][INFO    ][6726] Returning information for job: 20180605220314593910
2018-06-05 22:03:24,659 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220324640885
2018-06-05 22:03:24,699 [salt.minion      ][INFO    ][6759] Starting a new job with PID 6759
2018-06-05 22:03:24,842 [salt.minion      ][INFO    ][6759] Returning information for job: 20180605220324640885
2018-06-05 22:03:34,838 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220334810636
2018-06-05 22:03:34,881 [salt.minion      ][INFO    ][6815] Starting a new job with PID 6815
2018-06-05 22:03:34,917 [salt.minion      ][INFO    ][6815] Returning information for job: 20180605220334810636
2018-06-05 22:03:44,955 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220344930838
2018-06-05 22:03:44,988 [salt.minion      ][INFO    ][6861] Starting a new job with PID 6861
2018-06-05 22:03:45,027 [salt.minion      ][INFO    ][6861] Returning information for job: 20180605220344930838
2018-06-05 22:03:55,099 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220355080253
2018-06-05 22:03:55,139 [salt.minion      ][INFO    ][6920] Starting a new job with PID 6920
2018-06-05 22:03:55,183 [salt.minion      ][INFO    ][6920] Returning information for job: 20180605220355080253
2018-06-05 22:04:05,114 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220405101765
2018-06-05 22:04:05,149 [salt.minion      ][INFO    ][7388] Starting a new job with PID 7388
2018-06-05 22:04:05,475 [salt.minion      ][INFO    ][7388] Returning information for job: 20180605220405101765
2018-06-05 22:04:15,220 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220415200646
2018-06-05 22:04:15,245 [salt.minion      ][INFO    ][7502] Starting a new job with PID 7502
2018-06-05 22:04:15,250 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][6639] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:04:15,270 [salt.minion      ][INFO    ][7502] Returning information for job: 20180605220415200646
2018-06-05 22:04:15,364 [salt.minion      ][INFO    ][6639] Returning information for job: 20180605220304494633
2018-06-05 22:04:34,518 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command test.ping with jid 20180605220434506072
2018-06-05 22:04:34,562 [salt.minion      ][INFO    ][7523] Starting a new job with PID 7523
2018-06-05 22:04:34,696 [salt.minion      ][INFO    ][7523] Returning information for job: 20180605220434506072
2018-06-05 22:09:26,730 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command state.sls with jid 20180605220926718408
2018-06-05 22:09:26,764 [salt.minion      ][INFO    ][7617] Starting a new job with PID 7617
2018-06-05 22:09:28,795 [salt.state       ][INFO    ][7617] Loading fresh modules for state activity
2018-06-05 22:09:28,923 [salt.fileclient  ][INFO    ][7617] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-06-05 22:09:28,976 [salt.fileclient  ][INFO    ][7617] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-06-05 22:09:29,960 [salt.state       ][INFO    ][7617] Running state [keepalived] at time 22:09:29.960548
2018-06-05 22:09:29,961 [salt.state       ][INFO    ][7617] Executing state pkg.installed for keepalived
2018-06-05 22:09:29,962 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:09:30,852 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-06-05 22:09:31,064 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 22:09:36,424 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 22:09:36,501 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-06-05 22:09:36,788 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220936771048
2018-06-05 22:09:36,829 [salt.minion      ][INFO    ][8052] Starting a new job with PID 8052
2018-06-05 22:09:36,888 [salt.minion      ][INFO    ][8052] Returning information for job: 20180605220936771048
2018-06-05 22:09:46,827 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605220946805327
2018-06-05 22:09:46,873 [salt.minion      ][INFO    ][8908] Starting a new job with PID 8908
2018-06-05 22:09:46,916 [salt.minion      ][INFO    ][8908] Returning information for job: 20180605220946805327
2018-06-05 22:09:49,353 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:09:49,495 [salt.state       ][INFO    ][7617] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.1'
'keepalived' changed from 'absent' to '1:1.2.19-1ubuntu0.2'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libsensors4' changed from 'absent' to '1:3.4.0-2'

2018-06-05 22:09:49,546 [salt.state       ][INFO    ][7617] Loading fresh modules for state activity
2018-06-05 22:09:49,618 [salt.state       ][INFO    ][7617] Completed state [keepalived] at time 22:09:49.618813 duration_in_ms=19658.265
2018-06-05 22:09:49,628 [salt.state       ][INFO    ][7617] Running state [lsof] at time 22:09:49.628020
2018-06-05 22:09:49,628 [salt.state       ][INFO    ][7617] Executing state pkg.installed for lsof
2018-06-05 22:09:50,161 [salt.state       ][INFO    ][7617] All specified packages are already installed
2018-06-05 22:09:50,162 [salt.state       ][INFO    ][7617] Completed state [lsof] at time 22:09:50.162323 duration_in_ms=534.302
2018-06-05 22:09:50,165 [salt.state       ][INFO    ][7617] Running state [/etc/keepalived/keepalived.conf] at time 22:09:50.165242
2018-06-05 22:09:50,165 [salt.state       ][INFO    ][7617] Executing state file.managed for /etc/keepalived/keepalived.conf
2018-06-05 22:09:50,226 [salt.fileclient  ][INFO    ][7617] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-06-05 22:09:50,317 [salt.state       ][INFO    ][7617] File changed:
New file
2018-06-05 22:09:50,317 [salt.state       ][INFO    ][7617] Completed state [/etc/keepalived/keepalived.conf] at time 22:09:50.317799 duration_in_ms=152.558
2018-06-05 22:09:50,318 [salt.state       ][INFO    ][7617] Running state [keepalived] at time 22:09:50.318859
2018-06-05 22:09:50,319 [salt.state       ][INFO    ][7617] Executing state service.running for keepalived
2018-06-05 22:09:50,319 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-06-05 22:09:50,343 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-06-05 22:09:50,379 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-06-05 22:09:50,409 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-06-05 22:09:50,449 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-06-05 22:09:50,594 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-06-05 22:09:50,624 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-06-05 22:09:50,653 [salt.loaded.int.module.cmdmod][INFO    ][7617] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-06-05 22:09:50,679 [salt.state       ][INFO    ][7617] {'keepalived': True}
2018-06-05 22:09:50,679 [salt.state       ][INFO    ][7617] Completed state [keepalived] at time 22:09:50.679698 duration_in_ms=360.838
2018-06-05 22:09:50,681 [salt.minion      ][INFO    ][7617] Returning information for job: 20180605220926718408
2018-06-05 22:11:21,760 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command pillar.get with jid 20180605221121748893
2018-06-05 22:11:21,799 [salt.minion      ][INFO    ][9040] Starting a new job with PID 9040
2018-06-05 22:11:21,812 [salt.minion      ][INFO    ][9040] Returning information for job: 20180605221121748893
2018-06-05 22:31:27,026 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command state.sls with jid 20180605223127006902
2018-06-05 22:31:27,066 [salt.minion      ][INFO    ][9104] Starting a new job with PID 9104
2018-06-05 22:31:30,156 [salt.state       ][INFO    ][9104] Loading fresh modules for state activity
2018-06-05 22:31:30,299 [salt.fileclient  ][INFO    ][9104] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-06-05 22:31:30,344 [salt.fileclient  ][INFO    ][9104] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-06-05 22:31:30,393 [salt.fileclient  ][INFO    ][9104] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-06-05 22:31:31,322 [salt.state       ][INFO    ][9104] Running state [memcached] at time 22:31:31.322689
2018-06-05 22:31:31,323 [salt.state       ][INFO    ][9104] Executing state pkg.installed for memcached
2018-06-05 22:31:31,324 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:31:32,211 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-06-05 22:31:32,377 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 22:31:36,111 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 22:31:36,164 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-06-05 22:31:37,134 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605223137128263
2018-06-05 22:31:37,150 [salt.minion      ][INFO    ][9526] Starting a new job with PID 9526
2018-06-05 22:31:37,177 [salt.minion      ][INFO    ][9526] Returning information for job: 20180605223137128263
2018-06-05 22:31:45,082 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:31:45,171 [salt.state       ][INFO    ][9104] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-06-05 22:31:45,212 [salt.state       ][INFO    ][9104] Loading fresh modules for state activity
2018-06-05 22:31:45,275 [salt.state       ][INFO    ][9104] Completed state [memcached] at time 22:31:45.275820 duration_in_ms=13953.131
2018-06-05 22:31:45,284 [salt.state       ][INFO    ][9104] Running state [python-memcache] at time 22:31:45.284365
2018-06-05 22:31:45,285 [salt.state       ][INFO    ][9104] Executing state pkg.installed for python-memcache
2018-06-05 22:31:45,830 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 22:31:45,878 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-06-05 22:31:47,228 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605223147217840
2018-06-05 22:31:47,255 [salt.minion      ][INFO    ][10008] Starting a new job with PID 10008
2018-06-05 22:31:47,289 [salt.minion      ][INFO    ][10008] Returning information for job: 20180605223147217840
2018-06-05 22:31:50,343 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:31:50,462 [salt.state       ][INFO    ][9104] Made the following changes:
'python-memcache' changed from 'absent' to '1.57-2~u16.04+mcp1'

2018-06-05 22:31:50,505 [salt.state       ][INFO    ][9104] Loading fresh modules for state activity
2018-06-05 22:31:50,576 [salt.state       ][INFO    ][9104] Completed state [python-memcache] at time 22:31:50.575940 duration_in_ms=5291.57
2018-06-05 22:31:50,587 [salt.state       ][INFO    ][9104] Running state [/etc/memcached.conf] at time 22:31:50.586940
2018-06-05 22:31:50,587 [salt.state       ][INFO    ][9104] Executing state file.managed for /etc/memcached.conf
2018-06-05 22:31:50,653 [salt.fileclient  ][INFO    ][9104] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-06-05 22:31:50,723 [salt.state       ][INFO    ][9104] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-06-05 22:31:50,723 [salt.state       ][INFO    ][9104] Completed state [/etc/memcached.conf] at time 22:31:50.723573 duration_in_ms=136.635
2018-06-05 22:31:51,074 [salt.state       ][INFO    ][9104] Running state [memcached] at time 22:31:51.074885
2018-06-05 22:31:51,075 [salt.state       ][INFO    ][9104] Executing state service.running for memcached
2018-06-05 22:31:51,076 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-06-05 22:31:51,097 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-06-05 22:31:51,115 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-06-05 22:31:51,133 [salt.state       ][INFO    ][9104] The service memcached is already running
2018-06-05 22:31:51,133 [salt.state       ][INFO    ][9104] Completed state [memcached] at time 22:31:51.133540 duration_in_ms=58.653
2018-06-05 22:31:51,133 [salt.state       ][INFO    ][9104] Running state [memcached] at time 22:31:51.133865
2018-06-05 22:31:51,134 [salt.state       ][INFO    ][9104] Executing state service.mod_watch for memcached
2018-06-05 22:31:51,135 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-06-05 22:31:51,153 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-06-05 22:31:51,171 [salt.loaded.int.module.cmdmod][INFO    ][9104] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-06-05 22:31:51,213 [salt.state       ][INFO    ][9104] {'memcached': True}
2018-06-05 22:31:51,214 [salt.state       ][INFO    ][9104] Completed state [memcached] at time 22:31:51.214602 duration_in_ms=80.737
2018-06-05 22:31:51,216 [salt.minion      ][INFO    ][9104] Returning information for job: 20180605223127006902
2018-06-05 22:31:53,111 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command state.sls with jid 20180605223153105243
2018-06-05 22:31:53,146 [salt.minion      ][INFO    ][10137] Starting a new job with PID 10137
2018-06-05 22:31:56,241 [salt.state       ][INFO    ][10137] Loading fresh modules for state activity
2018-06-05 22:31:56,355 [salt.fileclient  ][INFO    ][10137] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-06-05 22:31:56,394 [salt.fileclient  ][INFO    ][10137] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-06-05 22:31:57,380 [salt.state       ][INFO    ][10137] Running state [haproxy] at time 22:31:57.380307
2018-06-05 22:31:57,381 [salt.state       ][INFO    ][10137] Executing state pkg.installed for haproxy
2018-06-05 22:31:57,382 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:31:58,175 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-06-05 22:31:58,366 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 22:32:02,014 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 22:32:02,061 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-06-05 22:32:03,206 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605223203201319
2018-06-05 22:32:03,234 [salt.minion      ][INFO    ][10556] Starting a new job with PID 10556
2018-06-05 22:32:03,269 [salt.minion      ][INFO    ][10556] Returning information for job: 20180605223203201319
2018-06-05 22:32:12,456 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:32:12,515 [salt.state       ][INFO    ][10137] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-06-05 22:32:12,541 [salt.state       ][INFO    ][10137] Loading fresh modules for state activity
2018-06-05 22:32:12,589 [salt.state       ][INFO    ][10137] Completed state [haproxy] at time 22:32:12.589090 duration_in_ms=15208.783
2018-06-05 22:32:12,594 [salt.state       ][INFO    ][10137] Running state [/etc/default/haproxy] at time 22:32:12.594562
2018-06-05 22:32:12,595 [salt.state       ][INFO    ][10137] Executing state file.managed for /etc/default/haproxy
2018-06-05 22:32:12,635 [salt.fileclient  ][INFO    ][10137] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-06-05 22:32:12,639 [salt.state       ][INFO    ][10137] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-06-05 22:32:12,643 [salt.state       ][INFO    ][10137] Completed state [/etc/default/haproxy] at time 22:32:12.643926 duration_in_ms=49.364
2018-06-05 22:32:12,644 [salt.state       ][INFO    ][10137] Running state [/etc/haproxy/haproxy.cfg] at time 22:32:12.644790
2018-06-05 22:32:12,645 [salt.state       ][INFO    ][10137] Executing state file.managed for /etc/haproxy/haproxy.cfg
2018-06-05 22:32:12,667 [salt.fileclient  ][INFO    ][10137] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-06-05 22:32:12,978 [salt.state       ][INFO    ][10137] File changed:
--- 
+++ 
@@ -1,35 +1,74 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 10.167.4.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8777 check
+  server mdb02 10.167.4.33:8777 check
+  server mdb03 10.167.4.34:8777 check
+
+listen panko_api
+  bind 10.167.4.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 10.167.4.32:8977 check
+  server mdb02 10.167.4.33:8977 check
+  server mdb03 10.167.4.34:8977 check
+
+listen gnocchi_api
+  bind 10.167.4.31:8041 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8041 check
+  server mdb02 10.167.4.33:8041 check
+  server mdb03 10.167.4.34:8041 check
+
+listen aodh-api
+  bind 10.167.4.31:8042 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server mdb01 10.167.4.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 10.167.4.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 10.167.4.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-06-05 22:32:12,985 [salt.state       ][INFO    ][10137] Completed state [/etc/haproxy/haproxy.cfg] at time 22:32:12.985524 duration_in_ms=340.735
2018-06-05 22:32:12,985 [salt.state       ][INFO    ][10137] Running state [/etc/haproxy/ssl] at time 22:32:12.985947
2018-06-05 22:32:12,986 [salt.state       ][INFO    ][10137] Executing state file.directory for /etc/haproxy/ssl
2018-06-05 22:32:12,988 [salt.state       ][INFO    ][10137] {'/etc/haproxy/ssl': 'New Dir'}
2018-06-05 22:32:12,988 [salt.state       ][INFO    ][10137] Completed state [/etc/haproxy/ssl] at time 22:32:12.988244 duration_in_ms=2.297
2018-06-05 22:32:12,988 [salt.state       ][INFO    ][10137] Running state [/etc/haproxy/errors/429.http11] at time 22:32:12.988621
2018-06-05 22:32:12,996 [salt.state       ][INFO    ][10137] Executing state file.managed for /etc/haproxy/errors/429.http11
2018-06-05 22:32:13,024 [salt.fileclient  ][INFO    ][10137] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-06-05 22:32:13,027 [salt.state       ][INFO    ][10137] File changed:
New file
2018-06-05 22:32:13,027 [salt.state       ][INFO    ][10137] Completed state [/etc/haproxy/errors/429.http11] at time 22:32:13.027535 duration_in_ms=38.913
2018-06-05 22:32:13,028 [salt.state       ][INFO    ][10137] Running state [haproxy_status_packages] at time 22:32:13.028611
2018-06-05 22:32:13,028 [salt.state       ][INFO    ][10137] Executing state pkg.installed for haproxy_status_packages
2018-06-05 22:32:13,416 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605223213256872
2018-06-05 22:32:13,440 [salt.minion      ][INFO    ][11023] Starting a new job with PID 11023
2018-06-05 22:32:13,495 [salt.minion      ][INFO    ][11023] Returning information for job: 20180605223213256872
2018-06-05 22:32:13,535 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 22:32:13,573 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-06-05 22:32:18,282 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 22:32:18,424 [salt.state       ][INFO    ][10137] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-06-05 22:32:18,467 [salt.state       ][INFO    ][10137] Loading fresh modules for state activity
2018-06-05 22:32:18,606 [salt.state       ][INFO    ][10137] Completed state [haproxy_status_packages] at time 22:32:18.606024 duration_in_ms=5577.412
2018-06-05 22:32:18,610 [salt.state       ][INFO    ][10137] Running state [/usr/bin/haproxy-status.sh] at time 22:32:18.610244
2018-06-05 22:32:18,610 [salt.state       ][INFO    ][10137] Executing state file.managed for /usr/bin/haproxy-status.sh
2018-06-05 22:32:18,640 [salt.fileclient  ][INFO    ][10137] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-06-05 22:32:18,680 [salt.state       ][INFO    ][10137] File changed:
New file
2018-06-05 22:32:18,681 [salt.state       ][INFO    ][10137] Completed state [/usr/bin/haproxy-status.sh] at time 22:32:18.681477 duration_in_ms=71.233
2018-06-05 22:32:18,684 [salt.state       ][INFO    ][10137] Running state [net.ipv4.ip_nonlocal_bind] at time 22:32:18.684473
2018-06-05 22:32:18,685 [salt.state       ][INFO    ][10137] Executing state sysctl.present for net.ipv4.ip_nonlocal_bind
2018-06-05 22:32:18,688 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command 'sysctl -a' in directory '/root'
2018-06-05 22:32:18,734 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-06-05 22:32:18,750 [salt.state       ][INFO    ][10137] {'net.ipv4.ip_nonlocal_bind': 1}
2018-06-05 22:32:18,751 [salt.state       ][INFO    ][10137] Completed state [net.ipv4.ip_nonlocal_bind] at time 22:32:18.751259 duration_in_ms=66.786
2018-06-05 22:32:19,090 [salt.state       ][INFO    ][10137] Running state [haproxy] at time 22:32:19.090033
2018-06-05 22:32:19,090 [salt.state       ][INFO    ][10137] Executing state service.running for haproxy
2018-06-05 22:32:19,092 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-06-05 22:32:19,114 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-06-05 22:32:19,132 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-06-05 22:32:19,150 [salt.state       ][INFO    ][10137] The service haproxy is already running
2018-06-05 22:32:19,151 [salt.state       ][INFO    ][10137] Completed state [haproxy] at time 22:32:19.151359 duration_in_ms=61.325
2018-06-05 22:32:19,152 [salt.state       ][INFO    ][10137] Running state [haproxy] at time 22:32:19.151964
2018-06-05 22:32:19,152 [salt.state       ][INFO    ][10137] Executing state service.mod_watch for haproxy
2018-06-05 22:32:19,153 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-06-05 22:32:19,171 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-06-05 22:32:19,189 [salt.loaded.int.module.cmdmod][INFO    ][10137] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-06-05 22:32:19,239 [salt.state       ][INFO    ][10137] {'haproxy': True}
2018-06-05 22:32:19,251 [salt.state       ][INFO    ][10137] Completed state [haproxy] at time 22:32:19.251558 duration_in_ms=99.593
2018-06-05 22:32:19,258 [salt.minion      ][INFO    ][10137] Returning information for job: 20180605223153105243
2018-06-05 22:32:21,912 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command service.status with jid 20180605223221906564
2018-06-05 22:32:21,975 [salt.minion      ][INFO    ][11351] Starting a new job with PID 11351
2018-06-05 22:32:22,592 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][11351] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-06-05 22:32:22,626 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][11351] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-06-05 22:32:22,655 [salt.minion      ][INFO    ][11351] Returning information for job: 20180605223221906564
2018-06-05 22:32:24,349 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command service.restart with jid 20180605223224341040
2018-06-05 22:32:24,390 [salt.minion      ][INFO    ][11359] Starting a new job with PID 11359
2018-06-05 22:32:24,964 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][11359] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-06-05 22:32:25,009 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][11359] Executing command ['systemctl', 'is-enabled', 'rsyslog.service'] in directory '/root'
2018-06-05 22:32:25,066 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][11359] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-06-05 22:32:25,133 [salt.minion      ][INFO    ][11359] Returning information for job: 20180605223224341040
2018-06-05 22:58:19,776 [salt.utils.schedule][INFO    ][2682] Running scheduled job: __mine_interval
2018-06-05 23:24:53,477 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command state.sls with jid 20180605232453464156
2018-06-05 23:24:53,519 [salt.minion      ][INFO    ][11537] Starting a new job with PID 11537
2018-06-05 23:24:55,645 [salt.state       ][INFO    ][11537] Loading fresh modules for state activity
2018-06-05 23:24:55,771 [salt.fileclient  ][INFO    ][11537] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-06-05 23:24:55,835 [salt.fileclient  ][INFO    ][11537] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-06-05 23:24:55,885 [salt.fileclient  ][INFO    ][11537] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-06-05 23:24:55,964 [salt.fileclient  ][INFO    ][11537] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-06-05 23:24:56,959 [salt.state       ][INFO    ][11537] Running state [redis-server] at time 23:24:56.959483
2018-06-05 23:24:56,960 [salt.state       ][INFO    ][11537] Executing state pkg.installed for redis-server
2018-06-05 23:24:56,961 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:24:57,885 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-06-05 23:24:58,100 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 23:25:03,611 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605232503593886
2018-06-05 23:25:03,647 [salt.minion      ][INFO    ][11937] Starting a new job with PID 11937
2018-06-05 23:25:03,669 [salt.minion      ][INFO    ][11937] Returning information for job: 20180605232503593886
2018-06-05 23:25:07,481 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:25:07,561 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-06-05 23:25:13,639 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605232513622628
2018-06-05 23:25:13,698 [salt.minion      ][INFO    ][12258] Starting a new job with PID 12258
2018-06-05 23:25:13,743 [salt.minion      ][INFO    ][12258] Returning information for job: 20180605232513622628
2018-06-05 23:25:18,055 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:25:18,256 [salt.state       ][INFO    ][11537] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-06-05 23:25:18,288 [salt.state       ][INFO    ][11537] Loading fresh modules for state activity
2018-06-05 23:25:18,342 [salt.state       ][INFO    ][11537] Completed state [redis-server] at time 23:25:18.341983 duration_in_ms=21382.497
2018-06-05 23:25:18,354 [salt.state       ][INFO    ][11537] Running state [vm.overcommit_memory] at time 23:25:18.353900
2018-06-05 23:25:18,355 [salt.state       ][INFO    ][11537] Executing state sysctl.present for vm.overcommit_memory
2018-06-05 23:25:18,363 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command 'sysctl -a' in directory '/root'
2018-06-05 23:25:18,453 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-06-05 23:25:18,483 [salt.state       ][INFO    ][11537] {'vm.overcommit_memory': 1}
2018-06-05 23:25:18,484 [salt.state       ][INFO    ][11537] Completed state [vm.overcommit_memory] at time 23:25:18.484666 duration_in_ms=130.767
2018-06-05 23:25:18,490 [salt.state       ][INFO    ][11537] Running state [/etc/redis/redis.conf] at time 23:25:18.490929
2018-06-05 23:25:18,491 [salt.state       ][INFO    ][11537] Executing state file.managed for /etc/redis/redis.conf
2018-06-05 23:25:18,551 [salt.fileclient  ][INFO    ][11537] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-06-05 23:25:18,704 [salt.state       ][INFO    ][11537] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.34
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -208,6 +208,7 @@
 #    and resynchronize with them.
 #
 # slaveof <masterip> <masterport>
+slaveof 10.167.4.32 6379
 
 # If the master is password protected (using the "requirepass" configuration
 # directive below) it is possible to tell the slave to authenticate before
@@ -505,7 +506,6 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
 appendonly no
 
 # The name of the append only file (default: "appendonly.aof")
@@ -535,9 +535,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-06-05 23:25:18,713 [salt.state       ][INFO    ][11537] Completed state [/etc/redis/redis.conf] at time 23:25:18.713574 duration_in_ms=222.645
2018-06-05 23:25:19,039 [salt.state       ][INFO    ][11537] Running state [redis-server] at time 23:25:19.038951
2018-06-05 23:25:19,039 [salt.state       ][INFO    ][11537] Executing state service.running for redis-server
2018-06-05 23:25:19,041 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-06-05 23:25:19,062 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-06-05 23:25:19,080 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-06-05 23:25:19,097 [salt.state       ][INFO    ][11537] The service redis-server is already running
2018-06-05 23:25:19,098 [salt.state       ][INFO    ][11537] Completed state [redis-server] at time 23:25:19.098094 duration_in_ms=59.143
2018-06-05 23:25:19,098 [salt.state       ][INFO    ][11537] Running state [redis-server] at time 23:25:19.098421
2018-06-05 23:25:19,098 [salt.state       ][INFO    ][11537] Executing state service.mod_watch for redis-server
2018-06-05 23:25:19,099 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-06-05 23:25:19,117 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-06-05 23:25:19,135 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-06-05 23:25:19,666 [salt.state       ][INFO    ][11537] {'redis-server': True}
2018-06-05 23:25:19,668 [salt.state       ][INFO    ][11537] Completed state [redis-server] at time 23:25:19.668490 duration_in_ms=570.064
2018-06-05 23:25:19,675 [salt.state       ][INFO    ][11537] Running state [redis-sentinel] at time 23:25:19.674885
2018-06-05 23:25:19,675 [salt.state       ][INFO    ][11537] Executing state pkg.installed for redis-sentinel
2018-06-05 23:25:20,018 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:25:20,119 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-06-05 23:25:23,724 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605232523694324
2018-06-05 23:25:23,768 [salt.minion      ][INFO    ][12615] Starting a new job with PID 12615
2018-06-05 23:25:23,809 [salt.minion      ][INFO    ][12615] Returning information for job: 20180605232523694324
2018-06-05 23:25:28,184 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:25:28,253 [salt.state       ][INFO    ][11537] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-06-05 23:25:28,284 [salt.state       ][INFO    ][11537] Loading fresh modules for state activity
2018-06-05 23:25:28,342 [salt.state       ][INFO    ][11537] Completed state [redis-sentinel] at time 23:25:28.341963 duration_in_ms=8667.076
2018-06-05 23:25:28,797 [salt.state       ][INFO    ][11537] Running state [/etc/redis/sentinel.conf] at time 23:25:28.797357
2018-06-05 23:25:28,798 [salt.state       ][INFO    ][11537] Executing state file.managed for /etc/redis/sentinel.conf
2018-06-05 23:25:28,851 [salt.fileclient  ][INFO    ][11537] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-06-05 23:25:28,972 [salt.state       ][INFO    ][11537] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 10.167.4.34
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 10.167.4.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-06-05 23:25:28,980 [salt.state       ][INFO    ][11537] Completed state [/etc/redis/sentinel.conf] at time 23:25:28.980092 duration_in_ms=182.734
2018-06-05 23:25:28,980 [salt.state       ][INFO    ][11537] Running state [redis-sentinel] at time 23:25:28.980849
2018-06-05 23:25:28,981 [salt.state       ][INFO    ][11537] Executing state service.running for redis-sentinel
2018-06-05 23:25:28,982 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-06-05 23:25:29,026 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-06-05 23:25:29,049 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-06-05 23:25:29,072 [salt.state       ][INFO    ][11537] The service redis-sentinel is already running
2018-06-05 23:25:29,072 [salt.state       ][INFO    ][11537] Completed state [redis-sentinel] at time 23:25:29.072810 duration_in_ms=91.978
2018-06-05 23:25:29,073 [salt.state       ][INFO    ][11537] Running state [redis-sentinel] at time 23:25:29.073562
2018-06-05 23:25:29,074 [salt.state       ][INFO    ][11537] Executing state service.mod_watch for redis-sentinel
2018-06-05 23:25:29,075 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-06-05 23:25:29,096 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-06-05 23:25:29,116 [salt.loaded.int.module.cmdmod][INFO    ][11537] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-06-05 23:25:29,493 [salt.state       ][INFO    ][11537] {'redis-sentinel': True}
2018-06-05 23:25:29,496 [salt.state       ][INFO    ][11537] Completed state [redis-sentinel] at time 23:25:29.495036 duration_in_ms=421.469
2018-06-05 23:25:29,501 [salt.minion      ][INFO    ][11537] Returning information for job: 20180605232453464156
2018-06-05 23:25:30,684 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command test.ping with jid 20180605232530672367
2018-06-05 23:25:30,723 [salt.minion      ][INFO    ][12886] Starting a new job with PID 12886
2018-06-05 23:25:30,876 [salt.minion      ][INFO    ][12886] Returning information for job: 20180605232530672367
2018-06-05 23:31:35,693 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command state.sls with jid 20180605233135677866
2018-06-05 23:31:35,735 [salt.minion      ][INFO    ][12911] Starting a new job with PID 12911
2018-06-05 23:31:37,942 [salt.state       ][INFO    ][12911] Loading fresh modules for state activity
2018-06-05 23:31:38,095 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-06-05 23:31:38,152 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-06-05 23:31:38,305 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-06-05 23:31:38,343 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-06-05 23:31:38,383 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-06-05 23:31:38,539 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-06-05 23:31:38,666 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-06-05 23:31:38,833 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-06-05 23:31:39,041 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-06-05 23:31:39,155 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-06-05 23:31:39,263 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-06-05 23:31:40,312 [salt.state       ][INFO    ][12911] Running state [apache2] at time 23:31:40.312868
2018-06-05 23:31:40,313 [salt.state       ][INFO    ][12911] Executing state pkg.installed for apache2
2018-06-05 23:31:40,314 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:31:41,193 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-06-05 23:31:41,426 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 23:31:45,743 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233145726351
2018-06-05 23:31:45,765 [salt.minion      ][INFO    ][13318] Starting a new job with PID 13318
2018-06-05 23:31:45,786 [salt.minion      ][INFO    ][13318] Returning information for job: 20180605233145726351
2018-06-05 23:31:46,780 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:31:46,868 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-06-05 23:31:55,917 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233155899248
2018-06-05 23:31:55,953 [salt.minion      ][INFO    ][13963] Starting a new job with PID 13963
2018-06-05 23:31:55,995 [salt.minion      ][INFO    ][13963] Returning information for job: 20180605233155899248
2018-06-05 23:32:06,131 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233206114147
2018-06-05 23:32:06,170 [salt.minion      ][INFO    ][14374] Starting a new job with PID 14374
2018-06-05 23:32:06,215 [salt.minion      ][INFO    ][14374] Returning information for job: 20180605233206114147
2018-06-05 23:32:09,783 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:32:09,903 [salt.state       ][INFO    ][12911] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.8'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.8'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.8'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.8'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-06-05 23:32:09,983 [salt.state       ][INFO    ][12911] Loading fresh modules for state activity
2018-06-05 23:32:10,072 [salt.state       ][INFO    ][12911] Completed state [apache2] at time 23:32:10.071923 duration_in_ms=29759.055
2018-06-05 23:32:10,083 [salt.state       ][INFO    ][12911] Running state [libapache2-mod-wsgi] at time 23:32:10.083181
2018-06-05 23:32:10,083 [salt.state       ][INFO    ][12911] Executing state pkg.installed for libapache2-mod-wsgi
2018-06-05 23:32:10,696 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:32:10,750 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-06-05 23:32:16,356 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233216338312
2018-06-05 23:32:16,405 [salt.minion      ][INFO    ][14666] Starting a new job with PID 14666
2018-06-05 23:32:16,449 [salt.minion      ][INFO    ][14666] Returning information for job: 20180605233216338312
2018-06-05 23:32:18,939 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:32:19,015 [salt.state       ][INFO    ][12911] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-06-05 23:32:19,041 [salt.state       ][INFO    ][12911] Loading fresh modules for state activity
2018-06-05 23:32:19,092 [salt.state       ][INFO    ][12911] Completed state [libapache2-mod-wsgi] at time 23:32:19.092116 duration_in_ms=9008.934
2018-06-05 23:32:19,095 [salt.state       ][INFO    ][12911] Running state [a2enmod wsgi] at time 23:32:19.095714
2018-06-05 23:32:19,096 [salt.state       ][INFO    ][12911] Executing state cmd.run for a2enmod wsgi
2018-06-05 23:32:19,097 [salt.state       ][INFO    ][12911] /etc/apache2/mods-enabled/wsgi.load exists
2018-06-05 23:32:19,097 [salt.state       ][INFO    ][12911] Completed state [a2enmod wsgi] at time 23:32:19.097655 duration_in_ms=1.94
2018-06-05 23:32:19,098 [salt.state       ][INFO    ][12911] Running state [a2enmod rewrite] at time 23:32:19.098555
2018-06-05 23:32:19,099 [salt.state       ][INFO    ][12911] Executing state cmd.run for a2enmod rewrite
2018-06-05 23:32:19,102 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command 'a2enmod rewrite' in directory '/root'
2018-06-05 23:32:19,178 [salt.state       ][INFO    ][12911] {'pid': 14776, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-06-05 23:32:19,179 [salt.state       ][INFO    ][12911] Completed state [a2enmod rewrite] at time 23:32:19.179008 duration_in_ms=80.452
2018-06-05 23:32:19,186 [salt.state       ][INFO    ][12911] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 23:32:19.186267
2018-06-05 23:32:19,186 [salt.state       ][INFO    ][12911] Executing state file.managed for /etc/apache2/mods-available/mpm_prefork.conf
2018-06-05 23:32:19,231 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-06-05 23:32:19,319 [salt.state       ][INFO    ][12911] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-06-05 23:32:19,325 [salt.state       ][INFO    ][12911] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 23:32:19.325080 duration_in_ms=138.813
2018-06-05 23:32:19,325 [salt.state       ][INFO    ][12911] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:32:19.325368
2018-06-05 23:32:19,325 [salt.state       ][INFO    ][12911] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.load
2018-06-05 23:32:19,326 [salt.state       ][INFO    ][12911] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-06-05 23:32:19,326 [salt.state       ][INFO    ][12911] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:32:19.326239 duration_in_ms=0.871
2018-06-05 23:32:19,326 [salt.state       ][INFO    ][12911] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 23:32:19.326496
2018-06-05 23:32:19,326 [salt.state       ][INFO    ][12911] Executing state file.absent for /etc/apache2/mods-enabled/mpm_event.load
2018-06-05 23:32:19,327 [salt.state       ][INFO    ][12911] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-06-05 23:32:19,327 [salt.state       ][INFO    ][12911] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 23:32:19.327306 duration_in_ms=0.81
2018-06-05 23:32:19,328 [salt.state       ][INFO    ][12911] Running state [a2enmod mpm_prefork] at time 23:32:19.328414
2018-06-05 23:32:19,328 [salt.state       ][INFO    ][12911] Executing state cmd.run for a2enmod mpm_prefork
2018-06-05 23:32:19,332 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-06-05 23:32:19,409 [salt.state       ][INFO    ][12911] {'pid': 14798, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-06-05 23:32:19,410 [salt.state       ][INFO    ][12911] Completed state [a2enmod mpm_prefork] at time 23:32:19.410509 duration_in_ms=82.095
2018-06-05 23:32:19,411 [salt.state       ][INFO    ][12911] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:32:19.411327
2018-06-05 23:32:19,412 [salt.state       ][INFO    ][12911] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.conf
2018-06-05 23:32:19,412 [salt.state       ][INFO    ][12911] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-06-05 23:32:19,413 [salt.state       ][INFO    ][12911] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:32:19.413357 duration_in_ms=2.03
2018-06-05 23:32:19,413 [salt.state       ][INFO    ][12911] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 23:32:19.413937
2018-06-05 23:32:19,414 [salt.state       ][INFO    ][12911] Executing state file.absent for /etc/apache2/mods-enabled/mpm_event.conf
2018-06-05 23:32:19,415 [salt.state       ][INFO    ][12911] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-06-05 23:32:19,415 [salt.state       ][INFO    ][12911] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 23:32:19.415746 duration_in_ms=1.809
2018-06-05 23:32:19,416 [salt.state       ][INFO    ][12911] Running state [/etc/apache2/ports.conf] at time 23:32:19.416744
2018-06-05 23:32:19,417 [salt.state       ][INFO    ][12911] Executing state file.managed for /etc/apache2/ports.conf
2018-06-05 23:32:19,445 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-06-05 23:32:19,545 [salt.state       ][INFO    ][12911] File /etc/apache2/ports.conf is in the correct state
2018-06-05 23:32:19,547 [salt.state       ][INFO    ][12911] Completed state [/etc/apache2/ports.conf] at time 23:32:19.546971 duration_in_ms=130.224
2018-06-05 23:32:19,549 [salt.state       ][INFO    ][12911] Running state [/etc/apache2/conf-available/security.conf] at time 23:32:19.549099
2018-06-05 23:32:19,550 [salt.state       ][INFO    ][12911] Executing state file.managed for /etc/apache2/conf-available/security.conf
2018-06-05 23:32:19,580 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-06-05 23:32:19,674 [salt.state       ][INFO    ][12911] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-06-05 23:32:19,681 [salt.state       ][INFO    ][12911] Completed state [/etc/apache2/conf-available/security.conf] at time 23:32:19.681925 duration_in_ms=132.829
2018-06-05 23:32:20,059 [salt.state       ][INFO    ][12911] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 23:32:20.059901
2018-06-05 23:32:20,060 [salt.state       ][INFO    ][12911] Executing state file.managed for /etc/apache2/sites-available/wsgi_panko.conf
2018-06-05 23:32:20,090 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-06-05 23:32:20,133 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-06-05 23:32:20,236 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-06-05 23:32:20,272 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-06-05 23:32:20,331 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-06-05 23:32:20,361 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-06-05 23:32:20,396 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-06-05 23:32:20,418 [salt.state       ][INFO    ][12911] File changed:
New file
2018-06-05 23:32:20,418 [salt.state       ][INFO    ][12911] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 23:32:20.418656 duration_in_ms=358.756
2018-06-05 23:32:20,419 [salt.state       ][INFO    ][12911] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 23:32:20.419344
2018-06-05 23:32:20,419 [salt.state       ][INFO    ][12911] Executing state file.managed for /etc/apache2/sites-available/wsgi_gnocchi.conf
2018-06-05 23:32:20,698 [salt.state       ][INFO    ][12911] File changed:
New file
2018-06-05 23:32:20,698 [salt.state       ][INFO    ][12911] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 23:32:20.698925 duration_in_ms=279.582
2018-06-05 23:32:20,699 [salt.state       ][INFO    ][12911] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 23:32:20.699227
2018-06-05 23:32:20,699 [salt.state       ][INFO    ][12911] Executing state file.absent for /etc/apache2/sites-enabled/000-default.conf
2018-06-05 23:32:20,700 [salt.state       ][INFO    ][12911] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-06-05 23:32:20,700 [salt.state       ][INFO    ][12911] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 23:32:20.700227 duration_in_ms=1.0
2018-06-05 23:32:20,704 [salt.state       ][INFO    ][12911] Running state [apache2] at time 23:32:20.704115
2018-06-05 23:32:20,704 [salt.state       ][INFO    ][12911] Executing state service.running for apache2
2018-06-05 23:32:20,705 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-06-05 23:32:20,748 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-06-05 23:32:20,785 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:32:20,827 [salt.state       ][INFO    ][12911] The service apache2 is already running
2018-06-05 23:32:20,828 [salt.state       ][INFO    ][12911] Completed state [apache2] at time 23:32:20.828782 duration_in_ms=124.665
2018-06-05 23:32:20,829 [salt.state       ][INFO    ][12911] Running state [apache2] at time 23:32:20.829897
2018-06-05 23:32:20,831 [salt.state       ][INFO    ][12911] Executing state service.mod_watch for apache2
2018-06-05 23:32:20,833 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-06-05 23:32:20,874 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:32:20,920 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-06-05 23:32:21,295 [salt.state       ][INFO    ][12911] {'apache2': True}
2018-06-05 23:32:21,297 [salt.state       ][INFO    ][12911] Completed state [apache2] at time 23:32:21.297660 duration_in_ms=467.76
2018-06-05 23:32:21,302 [salt.state       ][INFO    ][12911] Running state [/etc/apache2/conf-enabled/security.conf] at time 23:32:21.302288
2018-06-05 23:32:21,309 [salt.state       ][INFO    ][12911] Executing state file.symlink for /etc/apache2/conf-enabled/security.conf
2018-06-05 23:32:21,315 [salt.state       ][INFO    ][12911] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-06-05 23:32:21,317 [salt.state       ][INFO    ][12911] Completed state [/etc/apache2/conf-enabled/security.conf] at time 23:32:21.317017 duration_in_ms=14.728
2018-06-05 23:32:21,321 [salt.state       ][INFO    ][12911] Running state [gnocchi-common] at time 23:32:21.321629
2018-06-05 23:32:21,322 [salt.state       ][INFO    ][12911] Executing state pkg.installed for gnocchi-common
2018-06-05 23:32:21,642 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:32:21,738 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-06-05 23:32:26,385 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233226367090
2018-06-05 23:32:26,428 [salt.minion      ][INFO    ][14936] Starting a new job with PID 14936
2018-06-05 23:32:26,473 [salt.minion      ][INFO    ][14936] Returning information for job: 20180605233226367090
2018-06-05 23:32:36,413 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233236396081
2018-06-05 23:32:36,454 [salt.minion      ][INFO    ][15187] Starting a new job with PID 15187
2018-06-05 23:32:36,499 [salt.minion      ][INFO    ][15187] Returning information for job: 20180605233236396081
2018-06-05 23:32:46,643 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233246626766
2018-06-05 23:32:46,686 [salt.minion      ][INFO    ][15442] Starting a new job with PID 15442
2018-06-05 23:32:46,730 [salt.minion      ][INFO    ][15442] Returning information for job: 20180605233246626766
2018-06-05 23:32:56,673 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233256655552
2018-06-05 23:32:56,691 [salt.minion      ][INFO    ][15630] Starting a new job with PID 15630
2018-06-05 23:32:56,716 [salt.minion      ][INFO    ][15630] Returning information for job: 20180605233256655552
2018-06-05 23:33:06,867 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233306847872
2018-06-05 23:33:06,906 [salt.minion      ][INFO    ][15812] Starting a new job with PID 15812
2018-06-05 23:33:06,962 [salt.minion      ][INFO    ][15812] Returning information for job: 20180605233306847872
2018-06-05 23:33:16,912 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233316892436
2018-06-05 23:33:16,949 [salt.minion      ][INFO    ][15977] Starting a new job with PID 15977
2018-06-05 23:33:16,986 [salt.minion      ][INFO    ][15977] Returning information for job: 20180605233316892436
2018-06-05 23:33:27,155 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233327135495
2018-06-05 23:33:27,199 [salt.minion      ][INFO    ][16204] Starting a new job with PID 16204
2018-06-05 23:33:27,242 [salt.minion      ][INFO    ][16204] Returning information for job: 20180605233327135495
2018-06-05 23:33:37,411 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233337393045
2018-06-05 23:33:37,455 [salt.minion      ][INFO    ][16458] Starting a new job with PID 16458
2018-06-05 23:33:37,499 [salt.minion      ][INFO    ][16458] Returning information for job: 20180605233337393045
2018-06-05 23:33:47,459 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233347436172
2018-06-05 23:33:47,500 [salt.minion      ][INFO    ][16665] Starting a new job with PID 16665
2018-06-05 23:33:47,544 [salt.minion      ][INFO    ][16665] Returning information for job: 20180605233347436172
2018-06-05 23:33:57,494 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233357473727
2018-06-05 23:33:57,526 [salt.minion      ][INFO    ][16852] Starting a new job with PID 16852
2018-06-05 23:33:57,575 [salt.minion      ][INFO    ][16852] Returning information for job: 20180605233357473727
2018-06-05 23:34:07,547 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233407525030
2018-06-05 23:34:07,591 [salt.minion      ][INFO    ][17052] Starting a new job with PID 17052
2018-06-05 23:34:07,645 [salt.minion      ][INFO    ][17052] Returning information for job: 20180605233407525030
2018-06-05 23:34:17,631 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233417609757
2018-06-05 23:34:17,675 [salt.minion      ][INFO    ][17191] Starting a new job with PID 17191
2018-06-05 23:34:17,726 [salt.minion      ][INFO    ][17191] Returning information for job: 20180605233417609757
2018-06-05 23:34:27,721 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233427697678
2018-06-05 23:34:27,768 [salt.minion      ][INFO    ][17376] Starting a new job with PID 17376
2018-06-05 23:34:27,816 [salt.minion      ][INFO    ][17376] Returning information for job: 20180605233427697678
2018-06-05 23:34:37,796 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233437778586
2018-06-05 23:34:37,834 [salt.minion      ][INFO    ][17882] Starting a new job with PID 17882
2018-06-05 23:34:37,876 [salt.minion      ][INFO    ][17882] Returning information for job: 20180605233437778586
2018-06-05 23:34:47,864 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233447842926
2018-06-05 23:34:47,906 [salt.minion      ][INFO    ][21705] Starting a new job with PID 21705
2018-06-05 23:34:47,964 [salt.minion      ][INFO    ][21705] Returning information for job: 20180605233447842926
2018-06-05 23:34:57,983 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233457962338
2018-06-05 23:34:58,024 [salt.minion      ][INFO    ][21710] Starting a new job with PID 21710
2018-06-05 23:34:58,071 [salt.minion      ][INFO    ][21710] Returning information for job: 20180605233457962338
2018-06-05 23:35:08,076 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233508053971
2018-06-05 23:35:08,119 [salt.minion      ][INFO    ][21763] Starting a new job with PID 21763
2018-06-05 23:35:08,165 [salt.minion      ][INFO    ][21763] Returning information for job: 20180605233508053971
2018-06-05 23:35:18,157 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233518132679
2018-06-05 23:35:18,192 [salt.minion      ][INFO    ][21959] Starting a new job with PID 21959
2018-06-05 23:35:18,221 [salt.minion      ][INFO    ][21959] Returning information for job: 20180605233518132679
2018-06-05 23:35:28,218 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233528197190
2018-06-05 23:35:28,269 [salt.minion      ][INFO    ][22165] Starting a new job with PID 22165
2018-06-05 23:35:28,314 [salt.minion      ][INFO    ][22165] Returning information for job: 20180605233528197190
2018-06-05 23:35:38,343 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233538322326
2018-06-05 23:35:38,376 [salt.minion      ][INFO    ][22335] Starting a new job with PID 22335
2018-06-05 23:35:38,411 [salt.minion      ][INFO    ][22335] Returning information for job: 20180605233538322326
2018-06-05 23:35:48,430 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233548410188
2018-06-05 23:35:48,477 [salt.minion      ][INFO    ][22494] Starting a new job with PID 22494
2018-06-05 23:35:48,518 [salt.minion      ][INFO    ][22494] Returning information for job: 20180605233548410188
2018-06-05 23:35:58,539 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233558521751
2018-06-05 23:35:58,582 [salt.minion      ][INFO    ][22589] Starting a new job with PID 22589
2018-06-05 23:35:58,624 [salt.minion      ][INFO    ][22589] Returning information for job: 20180605233558521751
2018-06-05 23:36:08,653 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233608633438
2018-06-05 23:36:08,701 [salt.minion      ][INFO    ][22688] Starting a new job with PID 22688
2018-06-05 23:36:08,747 [salt.minion      ][INFO    ][22688] Returning information for job: 20180605233608633438
2018-06-05 23:36:18,767 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233618749563
2018-06-05 23:36:18,817 [salt.minion      ][INFO    ][22872] Starting a new job with PID 22872
2018-06-05 23:36:18,858 [salt.minion      ][INFO    ][22872] Returning information for job: 20180605233618749563
2018-06-05 23:36:28,879 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233628860062
2018-06-05 23:36:28,929 [salt.minion      ][INFO    ][22993] Starting a new job with PID 22993
2018-06-05 23:36:28,976 [salt.minion      ][INFO    ][22993] Returning information for job: 20180605233628860062
2018-06-05 23:36:38,996 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233638977578
2018-06-05 23:36:39,039 [salt.minion      ][INFO    ][23101] Starting a new job with PID 23101
2018-06-05 23:36:39,117 [salt.minion      ][INFO    ][23101] Returning information for job: 20180605233638977578
2018-06-05 23:36:47,547 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:36:47,637 [salt.state       ][INFO    ][12911] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-retrying' changed from 'absent' to '1.3.3-1'
'libxrender1' changed from 'absent' to '1:0.9.9-0ubuntu1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-scipy' changed from 'absent' to '0.18.1-2~16.04+mcp3'
'python-daiquiri' changed from 'absent' to '1.2.1-1~u16.04+mcp1'
'binutils-gold' changed from 'absent' to '1'
'python-nose' changed from 'absent' to '1.3.7-1'
'python-psycopg2' changed from 'absent' to '2.6.1-1build2'
'python2.7-numpy' changed from 'absent' to '1'
'python-cvxopt' changed from 'absent' to '1.1.4-1.4'
'fontconfig' changed from 'absent' to '2.11.94-0ubuntu1.1'
'python-asn1crypto' changed from 'absent' to '0.22.0-1~u16.04+mcp2'
'python2.7-pandas-lib' changed from 'absent' to '1'
'python2.7-dev:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-openpyxl' changed from 'absent' to '2.3.0-1'
'python-gobject-2' changed from 'absent' to '2.28.6-12ubuntu1'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '36.2.7-2~cloud0'
'libsuitesparseconfig4.4.6' changed from 'absent' to '1:4.4.6-1'
'python-glade2' changed from 'absent' to '2.24.0-4ubuntu1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'libgdk-pixbuf2.0-common' changed from 'absent' to '2.32.2-1ubuntu1.4'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'libdsdp-5.8gf' changed from 'absent' to '5.8-9.1ubuntu2'
'python-openssl' changed from '0.15.1-2build1' to '16.2.0-2~u16.04+mcp1'
'python-requests' changed from '2.9.1-3' to '2.18.1-2~u16.04+mcp1'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'libxcursor1' changed from 'absent' to '1:1.1.14-1ubuntu0.16.04.1'
'python-xlrd' changed from 'absent' to '0.9.4-1'
'libexpat-dev' changed from 'absent' to '1'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libgraphite2-3' changed from 'absent' to '1.3.10-0ubuntu0.16.04.1'
'python-oslo.db' changed from 'absent' to '4.25.1-3~u16.04+mcp4'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python-patsy' changed from 'absent' to '0.4.1-2'
'python-extras' changed from 'absent' to '0.0.3-3'
'libxcb-shm0' changed from 'absent' to '1.11.1-1ubuntu1'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-ply-lex-3.5' changed from 'absent' to '1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python-zake' changed from 'absent' to '0.1.6-1'
'libxrandr2' changed from 'absent' to '2:1.5.0-1'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'libgsl2' changed from 'absent' to '2.1+dfsg-2'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'python2.7-gobject' changed from 'absent' to '1'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-oslo.middleware' changed from 'absent' to '3.30.1-1~u16.04+mcp2'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-imaging' changed from 'absent' to '3.1.2-0ubuntu1.1'
'libpaperg' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'liblapack.so.3' changed from 'absent' to '1'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libfontconfig' changed from 'absent' to '1'
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-cffi' changed from 'absent' to '1.9.1-2~u16.04+mcp3'
'libdatrie1' changed from 'absent' to '0.2.10-2'
'python-urllib3' changed from '1.13.1-2ubuntu0.16.04.1' to '1.21.1-1~u16.04+mcp2'
'manpages-dev' changed from 'absent' to '4.04-2'
'python-joblib' changed from 'absent' to '0.9.4-1'
'libjs-jquery-ui' changed from 'absent' to '1.12.1+dfsg-5~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-oslo-log' changed from 'absent' to '1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-jsonpatch' changed from 'absent' to '1.19-3'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.6'
'libxinerama1' changed from 'absent' to '2:1.1.3-1'
'python-waitress' changed from 'absent' to '0.8.10-1'
'libcups2' changed from 'absent' to '2.1.3-4ubuntu0.4'
'libblas.so.3' changed from 'absent' to '1'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:4.11.1-1~u16.04+mcp2'
'python-antlr' changed from 'absent' to '2.7.7+dfsg-6ubuntu1'
'python-f2py' changed from 'absent' to '1'
'python2.7-scipy' changed from 'absent' to '1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'libxdamage1' changed from 'absent' to '1:1.1.4-2'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.13-0ubuntu0.16.04'
'python2.7-waitress' changed from 'absent' to '1'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python2.7-pandas' changed from 'absent' to '1'
'python-oslo.serialization' changed from 'absent' to '2.20.2-1~u16.04+mcp3'
'python-oslo.utils' changed from 'absent' to '3.28.2-1~u16.04+mcp3'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'libpangocairo-1.0-0' changed from 'absent' to '1.38.1-1'
'python-dev:any' changed from 'absent' to '1'
'python-cairo' changed from 'absent' to '1.8.8-2'
'gnocchi-common' changed from 'absent' to '4.0.4-2~u16.04+mcp1'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python-cycler' changed from 'absent' to '0.9.0-1'
'libpango-1.0-0' changed from 'absent' to '1.38.1-1'
'libsnappy1v5' changed from 'absent' to '1.1.3-2'
'libglade2-0' changed from 'absent' to '1:2.6.4-2'
'libisl15' changed from 'absent' to '0.16.1-1'
'python-webtest' changed from 'absent' to '2.0.18-1ubuntu1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'libltdl7' changed from 'absent' to '2.4.6-0.1'
'python-tables-data' changed from 'absent' to '3.2.2-2'
'python2.7-lxml' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libpython-dev' changed from 'absent' to '2.7.12-1~16.04'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-oslo.log' changed from 'absent' to '3.30.2-1~u16.04+mcp3'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-logutils' changed from 'absent' to '0.3.3-5'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-pycparser' changed from 'absent' to '2.14+dfsg-2build1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'libgtk2.0-common' changed from 'absent' to '2.24.30-1ubuntu1.16.04.2'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-pbr' changed from 'absent' to '2.0.0-1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-pika' changed from 'absent' to '0.10.0-1'
'libxcomposite1' changed from 'absent' to '1:0.4.4-1'
'python-greenlet' changed from 'absent' to '0.4.9-2fakesync1'
'python-oslo.service' changed from 'absent' to '1.25.1-1~u16.04+mcp2'
'python-tables-lib' changed from 'absent' to '3.2.2-2'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'tk8.6-blt2.5' changed from 'absent' to '2.5.3+dfsg-3'
'libxft2' changed from 'absent' to '2.3.2-1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python2.7-statsmodels' changed from 'absent' to '1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-zope' changed from 'absent' to '1'
'gtk2.0-binver-2.10.0' changed from 'absent' to '1'
'libpython2.7-dev' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'
'python2.7-cairo' changed from 'absent' to '1'
'python-pandas-lib' changed from 'absent' to '0.19.2-5.1~16.04+mcp2'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libc-dev' changed from 'absent' to '1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python2.7-ply' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'python-matplotlib' changed from 'absent' to '1.5.1-1ubuntu1'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.21.1-1~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-cotyledon' changed from 'absent' to '1.6.3-1.1~u16.04+mcp2'
'python2.7-dev' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'libaec0' changed from 'absent' to '0.3.2-1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '1.1.6-1.1~u16.04+mcp2'
'c-compiler' changed from 'absent' to '1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-ply-yacc-3.5' changed from 'absent' to '1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-tenacity' changed from 'absent' to '3.3.0-1.1~u16.04+mcp2'
'libxfixes3' changed from 'absent' to '1:5.0.1-2'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-pytest' changed from 'absent' to '3.1.3-1~u16.04+mcp2'
'python-testtools' changed from 'absent' to '1.8.1-0ubuntu1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-statsmodels' changed from 'absent' to '0.6.1-4'
'libgtk2.0-0' changed from 'absent' to '2.24.30-1ubuntu1.16.04.2'
'elf-binutils' changed from 'absent' to '1'
'libcolamd2.9.1' changed from 'absent' to '1:4.4.6-1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-netaddr' changed from 'absent' to '0.7.18-1'
'c++abi2-dev' changed from 'absent' to '1'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-certifi' changed from 'absent' to '2015.11.20.1-2'
'python-sqlalchemy-utils' changed from 'absent' to '0.30.12-4build1~cloud0'
'python-pandas' changed from 'absent' to '0.19.2-5.1~16.04+mcp2'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'libtk8.6' changed from 'absent' to '8.6.5-1'
'python-swiftclient' changed from 'absent' to '1:3.4.0-1~u16.04+mcp3'
'libamd2.4.1' changed from 'absent' to '1:4.4.6-1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'ttf-bitstream-vera' changed from 'absent' to '1.10-8'
'libgraphite2-2.0.0' changed from 'absent' to '1'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'libatk1.0-data' changed from 'absent' to '2.18.0-1'
'linux-libc-dev' changed from 'absent' to '4.4.0-127.153'
'python-xlwt' changed from 'absent' to '0.7.5+debian1-1'
'python-cryptography' changed from '1.2.3-1ubuntu0.1' to '2.0.2-1~u16.04+mcp3'
'libglpk36' changed from 'absent' to '4.57-1build3'
'python2.7-pil' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'libgdk-pixbuf2.0-0' changed from 'absent' to '2.32.2-1ubuntu1.4'
'python2.7-testtools' changed from 'absent' to '1'
'blt' changed from 'absent' to '2.5.3+dfsg-3'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'docutils' changed from 'absent' to '1'
'ieee-data' changed from 'absent' to '20150531.1'
'python2.7-dbus' changed from 'absent' to '1'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-pillow' changed from 'absent' to '1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2'
'python-oslo.context' changed from 'absent' to '1:2.17.0-1~u16.04+mcp2'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libstdc++-dev' changed from 'absent' to '1'
'libharfbuzz0b' changed from 'absent' to '1.0.1-1ubuntu0.1'
'python-numexpr' changed from 'absent' to '2.4.3-1ubuntu1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'python-oslo-utils' changed from 'absent' to '1'
'linux-kernel-headers' changed from 'absent' to '1'
'fontconfig-config' changed from 'absent' to '2.11.94-0ubuntu1.1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'libfontconfig1' changed from 'absent' to '2.11.94-0ubuntu1.1'
'libsz2' changed from 'absent' to '0.3.2-1'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'c++-compiler' changed from 'absent' to '1'
'python-tk' changed from 'absent' to '2.7.12-1~16.04'
'libthai-data' changed from 'absent' to '0.1.24-2'
'python2.7-gobject-2' changed from 'absent' to '1'
'python-oslo.policy' changed from 'absent' to '1.25.1-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '1.7.5.1-6ubuntu3'
'python-statsmodels-lib' changed from 'absent' to '0.6.1-4'
'libgtk2.0-bin' changed from 'absent' to '2.24.30-1ubuntu1.16.04.2'
'python-ujson' changed from 'absent' to '1.33-1build1'
'python-futurist' changed from 'absent' to '0.13.0-2'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'fonts-lyx' changed from 'absent' to '2.1.4-2'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-oslo-db' changed from 'absent' to '1'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libxi6' changed from 'absent' to '2:1.7.6-1'
'libcairo2' changed from 'absent' to '1.14.6-1'
'x11-common' changed from 'absent' to '1:7.7+13ubuntu3'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-tables' changed from 'absent' to '3.2.2-2'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-matplotlib-data' changed from 'absent' to '1.5.1-1ubuntu1'
'python-ply' changed from 'absent' to '3.7-1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libtcl8.6' changed from 'absent' to '8.6.5+dfsg-2'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.17.1-1~u16.04+mcp2'
'python-jdcal' changed from 'absent' to '1.0-1build1'
'python2.7-simplejson' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libxcb-render0' changed from 'absent' to '1.11.1-1ubuntu1'
'libpangoft2-1.0-0' changed from 'absent' to '1.38.1-1'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'hicolor-icon-theme' changed from 'absent' to '0.15-0ubuntu1'
'libatk1.0-0' changed from 'absent' to '2.18.0-1'
'libxss1' changed from 'absent' to '1:1.2.2-1'
'libfftw3-double3' changed from 'absent' to '3.3.4-2ubuntu1'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'cpp:any' changed from 'absent' to '1'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libthai0' changed from 'absent' to '0.1.24-2'
'python-dev' changed from 'absent' to '2.7.12-1~16.04'
'python-py' changed from 'absent' to '1.4.34-2~u16.04+mcp2'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'libhdf5-10' changed from 'absent' to '1.8.16+docs-4ubuntu1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-oslo.messaging' changed from 'absent' to '5.30.2-1~u16.04+mcp8'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'libtk' changed from 'absent' to '1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-keystoneclient' changed from 'absent' to '1:3.13.0-1~u16.04+mcp6'
'python-funcsigs' changed from 'absent' to '1.0.2-3~cloud0'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystoneauth1' changed from 'absent' to '3.1.0-1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python2.7-tk' changed from 'absent' to '1'
'python-numpy-api10' changed from 'absent' to '1'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-gtk2' changed from 'absent' to '2.24.0-4ubuntu1'
'python-tooz' changed from 'absent' to '1.47.0-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.17.0-1~u16.04+mcp2'
'python-gnocchi' changed from 'absent' to '4.0.4-2~u16.04+mcp1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python2.7-cvxopt' changed from 'absent' to '1'
'libexpat1-dev' changed from 'absent' to '2.1.0-7ubuntu0.16.04.3'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libtcl' changed from 'absent' to '1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-06-05 23:36:47,720 [salt.state       ][INFO    ][12911] Loading fresh modules for state activity
2018-06-05 23:36:47,841 [salt.state       ][INFO    ][12911] Completed state [gnocchi-common] at time 23:36:47.840764 duration_in_ms=266519.132
2018-06-05 23:36:47,854 [salt.state       ][INFO    ][12911] Running state [/etc/gnocchi/gnocchi.conf] at time 23:36:47.854459
2018-06-05 23:36:47,856 [salt.state       ][INFO    ][12911] Executing state file.managed for /etc/gnocchi/gnocchi.conf
2018-06-05 23:36:47,947 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.0/gnocchi.conf'
2018-06-05 23:36:48,190 [salt.fileclient  ][INFO    ][12911] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.0/storage/_redis.conf'
2018-06-05 23:36:48,207 [salt.state       ][INFO    ][12911] File changed:
--- 
+++ 
@@ -1,755 +1,49 @@
+
+
 [DEFAULT]
 
-#
-# From cotyledon
-#
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-# Note: This option can be changed without restarting.
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-# Note: This option can be changed without restarting.
-#graceful_shutdown_timeout = 60
-
-#
-# From gnocchi
-#
-
-# If set to true, the logging level will be set to DEBUG. (boolean value)
-#debug = false
-
-# If set to true, the logging level will be set to INFO. (boolean value)
-#verbose = true
-
-# Base directory for log files. If not set, logging will go to stderr. (string
-# value)
-#log_dir = <None>
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. (string value)
-#log_file = <None>
-
-# Use syslog for logging. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages. (boolean
-# value)
-#use_journal = false
-
-# Syslog facility to receive log lines. (string value)
-#syslog_log_facility = user
-
+debug = False
 
 [api]
 
-#
-# From gnocchi
-#
-
-# Path to API Paste configuration. (string value)
-#paste_config = api-paste.ini
-
-# Authentication mode to use. (string value)
-# Allowed values: remoteuser, keystone, noauth, basic
-#auth_mode = basic
-
-# The maximum number of items returned in a single response from a collection
-# resource (integer value)
-#max_limit = 1000
-
-# Number of seconds before timeout when attempting to force refresh of metric.
-# (integer value)
-# Minimum value: 0
-#refresh_timeout = 10
+auth_mode = keystone
 
 
 [archive_policy]
 
-#
-# From gnocchi
-#
-
-# Default aggregation methods to use in created archive policies (list value)
-#default_aggregation_methods = mean,min,max,sum,std,count
-
-
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[database]
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Timeout before idle SQL connections are reaped. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#idle_timeout = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
 
 [incoming]
+driver = redis
 
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# Swift pre-auth URL. (string value)
-#swift_preauthurl = ${storage.swift_preauthurl}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
+redis_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
-#
-# From gnocchi
-#
-
-# Indexer driver to use (string value)
-#url = <None>
+url = mysql+pymysql://gnocchi:opnfv_secret@10.167.4.23/gnocchi
 
 
 [keystone_authtoken]
-auth_protocol = http
-
-#
-# From keystonemiddleware.auth_token
-#
-
-# Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should ideally be unversioned, client support in the
-# wild varies. If you're using a versioned v2 endpoint here, then this should
-# *not* be the same endpoint the service user utilizes for validating tokens,
-# because normal end users may not be able to reach that endpoint. (string
-# value)
-#auth_uri = <None>
-
-# API version of the admin Identity API endpoint. (string value)
-#auth_version = <None>
-
-# Do not handle authorization requests within the middleware, but delegate the
-# authorization decision to downstream WSGI components. (boolean value)
-#delay_auth_decision = false
-
-# Request timeout value for communicating with Identity API server. (integer
-# value)
-#http_connect_timeout = <None>
-
-# How many times are we trying to reconnect when communicating with Identity
-# API Server. (integer value)
-#http_request_max_retries = 3
-
-# Request environment key where the Swift cache object is stored. When
-# auth_token middleware is deployed with a Swift cache, use this option to have
-# the middleware share a caching backend with swift. Otherwise, use the
-# ``memcached_servers`` option instead. (string value)
-#cache = <None>
-
-# Required if identity server requires client certificate (string value)
-#certfile = <None>
-
-# Required if identity server requires client certificate (string value)
-#keyfile = <None>
-
-# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# Defaults to system CAs. (string value)
-#cafile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# The region in which the identity server can be found. (string value)
-#region_name = <None>
-
-# DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P
-# release. (string value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#signing_dir = <None>
-
-# Optionally specify a list of memcached server(s) to use for caching. If left
-# undefined, tokens will instead be cached in-process. (list value)
-# Deprecated group/name - [keystone_authtoken]/memcache_servers
-#memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Allowed values: None, MAC, ENCRYPT
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead before it is
-# tried again. (integer value)
-#memcache_pool_dead_retry = 300
-
-# (Optional) Maximum total number of open connections to every memcached
-# server. (integer value)
-#memcache_pool_maxsize = 10
-
-# (Optional) Socket timeout in seconds for communicating with a memcached
-# server. (integer value)
-#memcache_pool_socket_timeout = 3
-
-# (Optional) Number of seconds a connection to memcached is held unused in the
-# pool before it is closed. (integer value)
-#memcache_pool_unused_timeout = 60
-
-# (Optional) Number of seconds that an operation will wait to get a memcached
-# client connection from the pool. (integer value)
-#memcache_pool_conn_get_timeout = 10
-
-# (Optional) Use the advanced (eventlet safe) memcached client pool. The
-# advanced pool will only work under python 2.x. (boolean value)
-#memcache_use_advanced_pool = false
-
-# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
-# middleware will not ask for service catalog on token validation and will not
-# set the X-Service-Catalog header. (boolean value)
-#include_service_catalog = true
-
-# Used to control the use and type of token binding. Can be set to: "disabled"
-# to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it
-# if not. "strict" like "permissive" but if the bind type is unknown the token
-# will be rejected. "required" any form of token binding is needed to be
-# allowed. Finally the name of a binding method that must be present in tokens.
-# (string value)
-#enforce_token_bind = permissive
-
-# DEPRECATED: If true, the revocation list will be checked for cached tokens.
-# This requires that PKI tokens are configured on the identity server. (boolean
-# value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#check_revocations_for_cached = false
-
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
-# single algorithm or multiple. The algorithms are those supported by Python
-# standard hashlib.new(). The hashes will be tried in the order given, so put
-# the preferred one first for performance. The result of the first hash will be
-# stored in the cache. This will typically be set to multiple values only while
-# migrating from a less secure algorithm to a more secure one. Once all the old
-# tokens are expired this option should be set to a single value for better
-# performance. (list value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#hash_algorithms = md5
-
-# A choice of roles that must be present in a service token. Service tokens are
-# allowed to request that an expired token can be used and so this check should
-# tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present.
-# For backwards compatibility reasons this currently only affects the
-# allow_expired check. (list value)
-#service_token_roles = service
-
-# For backwards compatibility reasons we must let valid service tokens pass
-# that don't pass the service_token_roles check as valid. Setting this true
-# will become the default in a future release and should be enabled if
-# possible. (boolean value)
-#service_token_roles_required = false
-
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Allowed values: http, https
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
-# Authentication type to load (string value)
-# Deprecated group/name - [keystone_authtoken]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = gnocchi
+password = opnfv_secret
+auth_uri = http://10.167.4.35:5000
+auth_url = http://10.167.4.35:35357
+auth_type = password
+memcached_servers=10.167.4.32:11211,10.167.4.33:11211,10.167.4.34:11211
 
 [metricd]
 
-#
-# From gnocchi
-#
-
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Frequency to detect when metricd workers join or leave system (in seconds). A
-# shorter rate, may improve rebalancing but create more coordination load
-# (integer value)
-#worker_sync_rate = 30
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
 
 [oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
+enable_proxy_headers_parsing = True
 
 [statsd]
 
-#
-# From gnocchi
-#
-
-# The listen IP for statsd (unknown value)
-#host = 0.0.0.0
-
-# The port for statsd (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#port = 8125
-
-# Resource UUID to use to identify statsd in Gnocchi (unknown value)
-#resource_id = <None>
-
-# DEPRECATED: User ID to use to identify statsd in Gnocchi (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#user_id = <None>
-
-# DEPRECATED: Project ID to use to identify statsd in Gnocchi (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#project_id = <None>
-
-# Creator value to use to identify statsd in Gnocchi (string value)
-#creator = ${statsd.user_id}:${statsd.project_id}
-
-# Archive policy name to use when creating metrics (string value)
-#archive_policy_name = <None>
-
-# Delay between flushes (floating point value)
-#flush_delay = 10
-
 
 [storage]
+driver = redis
 
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# Swift pre-auth URL. (string value)
-#swift_preauthurl = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# Number of threads to process and store aggregates. Set value roughly equal to
-# number of aggregates to be computed per metric (integer value)
-# Minimum value: 1
-#aggregation_workers_number = 1
-
-# Coordination driver URL (string value)
-#coordination_url = <None>
+redis_url = redis://10.167.4.34:6379
+coordination_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379

2018-06-05 23:36:48,214 [salt.state       ][INFO    ][12911] Completed state [/etc/gnocchi/gnocchi.conf] at time 23:36:48.214905 duration_in_ms=360.448
2018-06-05 23:36:48,240 [salt.state       ][INFO    ][12911] Running state [gnocchi-api] at time 23:36:48.240122
2018-06-05 23:36:48,240 [salt.state       ][INFO    ][12911] Executing state pkg.installed for gnocchi-api
2018-06-05 23:36:49,172 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233649155075
2018-06-05 23:36:49,219 [salt.minion      ][INFO    ][23287] Starting a new job with PID 23287
2018-06-05 23:36:49,267 [salt.minion      ][INFO    ][23287] Returning information for job: 20180605233649155075
2018-06-05 23:36:50,078 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:36:50,168 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-06-05 23:36:59,318 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233659300122
2018-06-05 23:36:59,355 [salt.minion      ][INFO    ][23481] Starting a new job with PID 23481
2018-06-05 23:36:59,400 [salt.minion      ][INFO    ][23481] Returning information for job: 20180605233659300122
2018-06-05 23:37:09,457 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233709440436
2018-06-05 23:37:09,498 [salt.minion      ][INFO    ][24074] Starting a new job with PID 24074
2018-06-05 23:37:09,535 [salt.minion      ][INFO    ][24074] Returning information for job: 20180605233709440436
2018-06-05 23:37:16,225 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:37:16,408 [salt.state       ][INFO    ][12911] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp10'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-warlock' changed from 'absent' to '1.1.0-1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-osc-lib' changed from 'absent' to '1.7.0-1~u16.04+mcp2'
'python-openstacksdk' changed from 'absent' to '0.9.17-1~u16.04+mcp2'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'
'python-os-client-config' changed from 'absent' to '1.28.0-1~u16.04+mcp2'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.12.1-1~u16.04+mcp4'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-glanceclient' changed from 'absent' to '1:2.8.0-1~u16.04+mcp12'
'python-cinderclient' changed from 'absent' to '1:3.1.0-1~u16.04+mcp2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.5.0-1~u16.04+mcp15'
'sqlite3' changed from 'absent' to '3.11.0-1ubuntu1'
'gnocchi-api' changed from 'absent' to '4.0.4-2~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-q-text-as-data' changed from 'absent' to '1.4.0-1'
'python-jsonschema' changed from 'absent' to '2.5.1-4'
'python2.7-cinderclient' changed from 'absent' to '1'
'q-text-as-data' changed from 'absent' to '1'

2018-06-05 23:37:16,509 [salt.state       ][INFO    ][12911] Loading fresh modules for state activity
2018-06-05 23:37:16,602 [salt.state       ][INFO    ][12911] Completed state [gnocchi-api] at time 23:37:16.602068 duration_in_ms=28361.942
2018-06-05 23:37:16,623 [salt.state       ][INFO    ][12911] Running state [gnocchi-metricd] at time 23:37:16.623351
2018-06-05 23:37:16,625 [salt.state       ][INFO    ][12911] Executing state pkg.installed for gnocchi-metricd
2018-06-05 23:37:18,004 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:37:18,129 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-06-05 23:37:19,605 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233719585886
2018-06-05 23:37:19,645 [salt.minion      ][INFO    ][24218] Starting a new job with PID 24218
2018-06-05 23:37:19,694 [salt.minion      ][INFO    ][24218] Returning information for job: 20180605233719585886
2018-06-05 23:37:25,584 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:37:25,679 [salt.state       ][INFO    ][12911] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.0.4-2~u16.04+mcp1'

2018-06-05 23:37:25,727 [salt.state       ][INFO    ][12911] Loading fresh modules for state activity
2018-06-05 23:37:26,001 [salt.state       ][INFO    ][12911] Completed state [gnocchi-metricd] at time 23:37:26.001432 duration_in_ms=9378.082
2018-06-05 23:37:26,013 [salt.state       ][INFO    ][12911] Running state [python-memcache] at time 23:37:26.013075
2018-06-05 23:37:26,014 [salt.state       ][INFO    ][12911] Executing state pkg.installed for python-memcache
2018-06-05 23:37:26,707 [salt.state       ][INFO    ][12911] All specified packages are already installed
2018-06-05 23:37:26,708 [salt.state       ][INFO    ][12911] Completed state [python-memcache] at time 23:37:26.708714 duration_in_ms=695.638
2018-06-05 23:37:26,711 [salt.state       ][INFO    ][12911] Running state [gnocchi-upgrade] at time 23:37:26.710970
2018-06-05 23:37:26,711 [salt.state       ][INFO    ][12911] Executing state cmd.run for gnocchi-upgrade
2018-06-05 23:37:26,712 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-06-05 23:37:29,764 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605233729748880
2018-06-05 23:37:29,790 [salt.minion      ][INFO    ][24454] Starting a new job with PID 24454
2018-06-05 23:37:29,815 [salt.minion      ][INFO    ][24454] Returning information for job: 20180605233729748880
2018-06-05 23:37:31,152 [salt.state       ][INFO    ][12911] {'pid': 24432, 'retcode': 0, 'stderr': '2018-06-05 23:37:30,718 [24435] INFO     gnocchi.cli: Upgrading indexer <gnocchi.indexer.sqlalchemy.SQLAlchemyIndexer object at 0x7f1468473190>\n2018-06-05 23:37:30,943 [24435] INFO     gnocchi.cli: Upgrading storage <gnocchi.storage.redis.RedisStorage object at 0x7f14626cc490>', 'stdout': ''}
2018-06-05 23:37:31,155 [salt.state       ][INFO    ][12911] Completed state [gnocchi-upgrade] at time 23:37:31.155181 duration_in_ms=4444.207
2018-06-05 23:37:31,163 [salt.state       ][INFO    ][12911] Running state [wsgi_gnocchi] at time 23:37:31.163375
2018-06-05 23:37:31,165 [salt.state       ][INFO    ][12911] Executing state apache_site.enabled for wsgi_gnocchi
2018-06-05 23:37:31,168 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-06-05 23:37:31,319 [salt.state       ][INFO    ][12911] {'new': 'wsgi_gnocchi', 'old': None}
2018-06-05 23:37:31,321 [salt.state       ][INFO    ][12911] Completed state [wsgi_gnocchi] at time 23:37:31.321277 duration_in_ms=157.903
2018-06-05 23:37:31,328 [salt.state       ][INFO    ][12911] Running state [apache2] at time 23:37:31.328269
2018-06-05 23:37:31,330 [salt.state       ][INFO    ][12911] Executing state service.running for apache2
2018-06-05 23:37:31,334 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-06-05 23:37:31,378 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:37:31,432 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:37:31,484 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-06-05 23:37:32,931 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-06-05 23:37:32,963 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:37:33,002 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:37:33,029 [salt.state       ][INFO    ][12911] {'apache2': True}
2018-06-05 23:37:33,030 [salt.state       ][INFO    ][12911] Completed state [apache2] at time 23:37:33.030224 duration_in_ms=1701.958
2018-06-05 23:37:33,031 [salt.state       ][INFO    ][12911] Running state [gnocchi-metricd] at time 23:37:33.031536
2018-06-05 23:37:33,031 [salt.state       ][INFO    ][12911] Executing state service.running for gnocchi-metricd
2018-06-05 23:37:33,037 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-06-05 23:37:33,070 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-06-05 23:37:33,098 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-06-05 23:37:33,129 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-06-05 23:37:33,155 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-06-05 23:37:33,232 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-06-05 23:37:33,290 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-06-05 23:37:33,354 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-06-05 23:37:33,402 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-06-05 23:37:33,506 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-06-05 23:37:34,838 [salt.loaded.int.module.cmdmod][INFO    ][12911] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-06-05 23:37:34,888 [salt.state       ][INFO    ][12911] {'gnocchi-metricd': True}
2018-06-05 23:37:34,889 [salt.state       ][INFO    ][12911] Completed state [gnocchi-metricd] at time 23:37:34.889057 duration_in_ms=1857.52
2018-06-05 23:37:34,906 [salt.minion      ][INFO    ][12911] Returning information for job: 20180605233135677866
2018-06-05 23:43:34,686 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command test.ping with jid 20180605234334672460
2018-06-05 23:43:34,728 [salt.minion      ][INFO    ][24772] Starting a new job with PID 24772
2018-06-05 23:43:34,922 [salt.minion      ][INFO    ][24772] Returning information for job: 20180605234334672460
2018-06-05 23:44:06,705 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command state.sls with jid 20180605234406689239
2018-06-05 23:44:06,744 [salt.minion      ][INFO    ][24777] Starting a new job with PID 24777
2018-06-05 23:44:08,810 [salt.state       ][INFO    ][24777] Loading fresh modules for state activity
2018-06-05 23:44:08,938 [salt.fileclient  ][INFO    ][24777] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-06-05 23:44:08,984 [salt.fileclient  ][INFO    ][24777] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-06-05 23:44:12,710 [salt.state       ][INFO    ][24777] Running state [apache2] at time 23:44:12.709996
2018-06-05 23:44:12,711 [salt.state       ][INFO    ][24777] Executing state pkg.installed for apache2
2018-06-05 23:44:12,712 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:44:13,643 [salt.state       ][INFO    ][24777] All specified packages are already installed
2018-06-05 23:44:13,644 [salt.state       ][INFO    ][24777] Completed state [apache2] at time 23:44:13.644502 duration_in_ms=934.507
2018-06-05 23:44:13,645 [salt.state       ][INFO    ][24777] Running state [libapache2-mod-wsgi] at time 23:44:13.645673
2018-06-05 23:44:13,646 [salt.state       ][INFO    ][24777] Executing state pkg.installed for libapache2-mod-wsgi
2018-06-05 23:44:13,659 [salt.state       ][INFO    ][24777] All specified packages are already installed
2018-06-05 23:44:13,659 [salt.state       ][INFO    ][24777] Completed state [libapache2-mod-wsgi] at time 23:44:13.659666 duration_in_ms=13.992
2018-06-05 23:44:13,663 [salt.state       ][INFO    ][24777] Running state [a2enmod wsgi] at time 23:44:13.663323
2018-06-05 23:44:13,663 [salt.state       ][INFO    ][24777] Executing state cmd.run for a2enmod wsgi
2018-06-05 23:44:13,664 [salt.state       ][INFO    ][24777] /etc/apache2/mods-enabled/wsgi.load exists
2018-06-05 23:44:13,665 [salt.state       ][INFO    ][24777] Completed state [a2enmod wsgi] at time 23:44:13.665276 duration_in_ms=1.953
2018-06-05 23:44:13,666 [salt.state       ][INFO    ][24777] Running state [a2enmod rewrite] at time 23:44:13.666161
2018-06-05 23:44:13,666 [salt.state       ][INFO    ][24777] Executing state cmd.run for a2enmod rewrite
2018-06-05 23:44:13,667 [salt.state       ][INFO    ][24777] /etc/apache2/mods-enabled/rewrite.load exists
2018-06-05 23:44:13,668 [salt.state       ][INFO    ][24777] Completed state [a2enmod rewrite] at time 23:44:13.668042 duration_in_ms=1.881
2018-06-05 23:44:13,673 [salt.state       ][INFO    ][24777] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 23:44:13.673571
2018-06-05 23:44:13,674 [salt.state       ][INFO    ][24777] Executing state file.managed for /etc/apache2/mods-available/mpm_prefork.conf
2018-06-05 23:44:14,006 [salt.state       ][INFO    ][24777] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-06-05 23:44:14,007 [salt.state       ][INFO    ][24777] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 23:44:14.007261 duration_in_ms=333.69
2018-06-05 23:44:14,007 [salt.state       ][INFO    ][24777] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:44:14.007870
2018-06-05 23:44:14,008 [salt.state       ][INFO    ][24777] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.load
2018-06-05 23:44:14,009 [salt.state       ][INFO    ][24777] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-06-05 23:44:14,009 [salt.state       ][INFO    ][24777] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:44:14.009777 duration_in_ms=1.907
2018-06-05 23:44:14,010 [salt.state       ][INFO    ][24777] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 23:44:14.010373
2018-06-05 23:44:14,010 [salt.state       ][INFO    ][24777] Executing state file.absent for /etc/apache2/mods-enabled/mpm_event.load
2018-06-05 23:44:14,011 [salt.state       ][INFO    ][24777] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-06-05 23:44:14,012 [salt.state       ][INFO    ][24777] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 23:44:14.012167 duration_in_ms=1.794
2018-06-05 23:44:14,013 [salt.state       ][INFO    ][24777] Running state [a2enmod mpm_prefork] at time 23:44:14.013560
2018-06-05 23:44:14,014 [salt.state       ][INFO    ][24777] Executing state cmd.run for a2enmod mpm_prefork
2018-06-05 23:44:14,014 [salt.state       ][INFO    ][24777] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-06-05 23:44:14,015 [salt.state       ][INFO    ][24777] Completed state [a2enmod mpm_prefork] at time 23:44:14.015450 duration_in_ms=1.89
2018-06-05 23:44:14,016 [salt.state       ][INFO    ][24777] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:44:14.016065
2018-06-05 23:44:14,016 [salt.state       ][INFO    ][24777] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.conf
2018-06-05 23:44:14,017 [salt.state       ][INFO    ][24777] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-06-05 23:44:14,017 [salt.state       ][INFO    ][24777] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:44:14.017905 duration_in_ms=1.84
2018-06-05 23:44:14,018 [salt.state       ][INFO    ][24777] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 23:44:14.018505
2018-06-05 23:44:14,019 [salt.state       ][INFO    ][24777] Executing state file.absent for /etc/apache2/mods-enabled/mpm_event.conf
2018-06-05 23:44:14,019 [salt.state       ][INFO    ][24777] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-06-05 23:44:14,020 [salt.state       ][INFO    ][24777] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 23:44:14.020321 duration_in_ms=1.816
2018-06-05 23:44:14,021 [salt.state       ][INFO    ][24777] Running state [/etc/apache2/ports.conf] at time 23:44:14.021221
2018-06-05 23:44:14,021 [salt.state       ][INFO    ][24777] Executing state file.managed for /etc/apache2/ports.conf
2018-06-05 23:44:14,122 [salt.state       ][INFO    ][24777] File /etc/apache2/ports.conf is in the correct state
2018-06-05 23:44:14,123 [salt.state       ][INFO    ][24777] Completed state [/etc/apache2/ports.conf] at time 23:44:14.123114 duration_in_ms=101.893
2018-06-05 23:44:14,124 [salt.state       ][INFO    ][24777] Running state [/etc/apache2/conf-available/security.conf] at time 23:44:14.123977
2018-06-05 23:44:14,124 [salt.state       ][INFO    ][24777] Executing state file.managed for /etc/apache2/conf-available/security.conf
2018-06-05 23:44:14,233 [salt.state       ][INFO    ][24777] File /etc/apache2/conf-available/security.conf is in the correct state
2018-06-05 23:44:14,234 [salt.state       ][INFO    ][24777] Completed state [/etc/apache2/conf-available/security.conf] at time 23:44:14.234086 duration_in_ms=110.109
2018-06-05 23:44:14,246 [salt.state       ][INFO    ][24777] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 23:44:14.246683
2018-06-05 23:44:14,247 [salt.state       ][INFO    ][24777] Executing state file.managed for /etc/apache2/sites-available/wsgi_panko.conf
2018-06-05 23:44:14,537 [salt.state       ][INFO    ][24777] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-06-05 23:44:14,538 [salt.state       ][INFO    ][24777] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 23:44:14.538343 duration_in_ms=291.66
2018-06-05 23:44:14,539 [salt.state       ][INFO    ][24777] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 23:44:14.539237
2018-06-05 23:44:14,539 [salt.state       ][INFO    ][24777] Executing state file.managed for /etc/apache2/sites-available/wsgi_gnocchi.conf
2018-06-05 23:44:14,836 [salt.state       ][INFO    ][24777] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-06-05 23:44:14,836 [salt.state       ][INFO    ][24777] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 23:44:14.836800 duration_in_ms=297.563
2018-06-05 23:44:14,837 [salt.state       ][INFO    ][24777] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 23:44:14.837401
2018-06-05 23:44:14,837 [salt.state       ][INFO    ][24777] Executing state file.absent for /etc/apache2/sites-enabled/000-default.conf
2018-06-05 23:44:14,838 [salt.state       ][INFO    ][24777] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-06-05 23:44:14,839 [salt.state       ][INFO    ][24777] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 23:44:14.839073 duration_in_ms=1.672
2018-06-05 23:44:14,842 [salt.state       ][INFO    ][24777] Running state [apache2] at time 23:44:14.842583
2018-06-05 23:44:14,843 [salt.state       ][INFO    ][24777] Executing state service.running for apache2
2018-06-05 23:44:14,844 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-06-05 23:44:14,930 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-06-05 23:44:14,971 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:44:15,021 [salt.state       ][INFO    ][24777] The service apache2 is already running
2018-06-05 23:44:15,023 [salt.state       ][INFO    ][24777] Completed state [apache2] at time 23:44:15.022904 duration_in_ms=180.317
2018-06-05 23:44:15,026 [salt.state       ][INFO    ][24777] Running state [/etc/apache2/conf-enabled/security.conf] at time 23:44:15.026560
2018-06-05 23:44:15,028 [salt.state       ][INFO    ][24777] Executing state file.symlink for /etc/apache2/conf-enabled/security.conf
2018-06-05 23:44:15,035 [salt.state       ][INFO    ][24777] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-06-05 23:44:15,036 [salt.state       ][INFO    ][24777] Completed state [/etc/apache2/conf-enabled/security.conf] at time 23:44:15.036496 duration_in_ms=9.936
2018-06-05 23:44:15,038 [salt.state       ][INFO    ][24777] Running state [panko-api] at time 23:44:15.038027
2018-06-05 23:44:15,039 [salt.state       ][INFO    ][24777] Executing state pkg.installed for panko-api
2018-06-05 23:44:15,107 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-06-05 23:44:15,312 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 23:44:16,772 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605234416753075
2018-06-05 23:44:16,830 [salt.minion      ][INFO    ][25017] Starting a new job with PID 25017
2018-06-05 23:44:16,868 [salt.minion      ][INFO    ][25017] Returning information for job: 20180605234416753075
2018-06-05 23:44:20,380 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:44:20,474 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-06-05 23:44:26,997 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605234426979439
2018-06-05 23:44:27,048 [salt.minion      ][INFO    ][25334] Starting a new job with PID 25334
2018-06-05 23:44:27,098 [salt.minion      ][INFO    ][25334] Returning information for job: 20180605234426979439
2018-06-05 23:44:29,764 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:44:29,963 [salt.state       ][INFO    ][24777] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '3.1.0-1~u16.04+mcp11'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '3.1.0-1~u16.04+mcp11'
'panko-api' changed from 'absent' to '3.1.0-1~u16.04+mcp11'
'python-oslo.reports' changed from 'absent' to '1.17.0-1.1~u16.04+mcp2'

2018-06-05 23:44:30,067 [salt.state       ][INFO    ][24777] Loading fresh modules for state activity
2018-06-05 23:44:30,158 [salt.state       ][INFO    ][24777] Completed state [panko-api] at time 23:44:30.158502 duration_in_ms=15120.473
2018-06-05 23:44:30,171 [salt.state       ][INFO    ][24777] Running state [/etc/panko/panko.conf] at time 23:44:30.171374
2018-06-05 23:44:30,173 [salt.state       ][INFO    ][24777] Executing state file.managed for /etc/panko/panko.conf
2018-06-05 23:44:30,224 [salt.fileclient  ][INFO    ][24777] Fetching file from saltenv 'base', ** done ** 'panko/files/pike/panko.conf.Debian'
2018-06-05 23:44:30,378 [salt.state       ][INFO    ][24777] File changed:
--- 
+++ 
@@ -8,6 +8,7 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+debug = False
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -168,14 +169,14 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
+#backend = sqlalchemy
 
 # The SQLAlchemy connection string to use to connect to the database. (string
 # value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
+connection = mysql+pymysql://panko:opnfv_secret@10.167.4.23/panko
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
@@ -213,6 +214,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -223,6 +225,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -288,6 +291,7 @@
 # because normal end users may not be able to reach that endpoint. (string
 # value)
 #auth_uri = <None>
+auth_uri = http://10.167.4.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -325,6 +329,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -338,6 +343,7 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
+memcached_servers =10.167.4.32:11211,10.167.4.33:11211,10.167.4.34:11211
 
 # In order to prevent excessive effort spent validating tokens, the middleware
 # caches previously-seen tokens for a configurable duration (in seconds). Set
@@ -459,6 +465,7 @@
 # Complete admin Identity API endpoint. This should specify the unversioned
 # root endpoint e.g. https://localhost:35357/ (string value)
 #identity_uri = <None>
+identity_uri = http://10.167.4.35:35357
 
 # This option is deprecated and may be removed in a future release. Single
 # shared secret with the Keystone configuration used for bootstrapping a
@@ -479,10 +486,18 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = panko
+password = opnfv_secret
+auth_url = http://10.167.4.35:35357
+interface = internal
 
 [oslo_middleware]
 

2018-06-05 23:44:30,388 [salt.state       ][INFO    ][24777] Completed state [/etc/panko/panko.conf] at time 23:44:30.385730 duration_in_ms=214.359
2018-06-05 23:44:30,391 [salt.state       ][INFO    ][24777] Running state [panko-dbsync] at time 23:44:30.391815
2018-06-05 23:44:30,392 [salt.state       ][INFO    ][24777] Executing state cmd.run for panko-dbsync
2018-06-05 23:44:30,408 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command 'panko-dbsync' in directory '/root'
2018-06-05 23:44:32,867 [salt.state       ][INFO    ][24777] {'pid': 25415, 'retcode': 0, 'stderr': '', 'stdout': '2018-06-05 23:44:31.472 25417 WARNING oslo_reports.guru_meditation_report [-] Guru meditation now registers SIGUSR1 and SIGUSR2 by default for backward compatibility. SIGUSR1 will no longer be registered in a future release, so please use SIGUSR2 to generate reports.'}
2018-06-05 23:44:32,869 [salt.state       ][INFO    ][24777] Completed state [panko-dbsync] at time 23:44:32.869615 duration_in_ms=2477.796
2018-06-05 23:44:32,887 [salt.state       ][INFO    ][24777] Running state [wsgi_panko] at time 23:44:32.887761
2018-06-05 23:44:32,888 [salt.state       ][INFO    ][24777] Executing state apache_site.enabled for wsgi_panko
2018-06-05 23:44:32,891 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-06-05 23:44:33,049 [salt.state       ][INFO    ][24777] {'new': 'wsgi_panko', 'old': None}
2018-06-05 23:44:33,050 [salt.state       ][INFO    ][24777] Completed state [wsgi_panko] at time 23:44:33.050602 duration_in_ms=162.841
2018-06-05 23:44:33,734 [salt.state       ][INFO    ][24777] Running state [apache2] at time 23:44:33.734893
2018-06-05 23:44:33,735 [salt.state       ][INFO    ][24777] Executing state service.running for apache2
2018-06-05 23:44:33,736 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-06-05 23:44:33,776 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:44:33,819 [salt.state       ][INFO    ][24777] The service apache2 is already running
2018-06-05 23:44:33,820 [salt.state       ][INFO    ][24777] Completed state [apache2] at time 23:44:33.820722 duration_in_ms=85.829
2018-06-05 23:44:33,821 [salt.state       ][INFO    ][24777] Running state [apache2] at time 23:44:33.821502
2018-06-05 23:44:33,822 [salt.state       ][INFO    ][24777] Executing state service.mod_watch for apache2
2018-06-05 23:44:33,824 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-06-05 23:44:33,863 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:44:33,910 [salt.loaded.int.module.cmdmod][INFO    ][24777] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-06-05 23:44:36,529 [salt.state       ][INFO    ][24777] {'apache2': True}
2018-06-05 23:44:36,530 [salt.state       ][INFO    ][24777] Completed state [apache2] at time 23:44:36.530566 duration_in_ms=2709.062
2018-06-05 23:44:36,542 [salt.minion      ][INFO    ][24777] Returning information for job: 20180605234406689239
2018-06-05 23:45:06,699 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command test.ping with jid 20180605234506684542
2018-06-05 23:45:06,738 [salt.minion      ][INFO    ][25585] Starting a new job with PID 25585
2018-06-05 23:45:06,880 [salt.minion      ][INFO    ][25585] Returning information for job: 20180605234506684542
2018-06-05 23:48:34,878 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command state.sls with jid 20180605234834862711
2018-06-05 23:48:34,920 [salt.minion      ][INFO    ][25592] Starting a new job with PID 25592
2018-06-05 23:48:36,913 [salt.state       ][INFO    ][25592] Loading fresh modules for state activity
2018-06-05 23:48:37,030 [salt.fileclient  ][INFO    ][25592] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-06-05 23:48:37,072 [salt.fileclient  ][INFO    ][25592] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-06-05 23:48:39,968 [salt.state       ][INFO    ][25592] Running state [aodh-api] at time 23:48:39.968602
2018-06-05 23:48:39,988 [salt.state       ][INFO    ][25592] Executing state pkg.installed for aodh-api
2018-06-05 23:48:39,989 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:48:40,940 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-06-05 23:48:41,135 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 23:48:44,926 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605234844912772
2018-06-05 23:48:44,950 [salt.minion      ][INFO    ][25985] Starting a new job with PID 25985
2018-06-05 23:48:44,995 [salt.minion      ][INFO    ][25985] Returning information for job: 20180605234844912772
2018-06-05 23:48:46,296 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:48:46,404 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-06-05 23:48:55,130 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605234855112931
2018-06-05 23:48:55,162 [salt.minion      ][INFO    ][26879] Starting a new job with PID 26879
2018-06-05 23:48:55,188 [salt.minion      ][INFO    ][26879] Returning information for job: 20180605234855112931
2018-06-05 23:49:05,320 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605234905305248
2018-06-05 23:49:05,361 [salt.minion      ][INFO    ][28869] Starting a new job with PID 28869
2018-06-05 23:49:05,426 [salt.minion      ][INFO    ][28869] Returning information for job: 20180605234905305248
2018-06-05 23:49:06,260 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:49:06,409 [salt.state       ][INFO    ][25592] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'make:any' changed from 'absent' to '1'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp2'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'python-aodh' changed from 'absent' to '5.1.0-2~u16.04+mcp7'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'python-gnocchiclient' changed from 'absent' to '3.3.1-2~u16.04+mcp1'
'aodh-api' changed from 'absent' to '5.1.0-2~u16.04+mcp7'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'python-croniter' changed from 'absent' to '0.3.8-1'
'aodh-common' changed from 'absent' to '5.1.0-2~u16.04+mcp7'
'make' changed from 'absent' to '4.1-6'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'

2018-06-05 23:49:06,475 [salt.state       ][INFO    ][25592] Loading fresh modules for state activity
2018-06-05 23:49:06,758 [salt.state       ][INFO    ][25592] Completed state [aodh-api] at time 23:49:06.758909 duration_in_ms=26790.308
2018-06-05 23:49:06,766 [salt.state       ][INFO    ][25592] Running state [aodh-evaluator] at time 23:49:06.766135
2018-06-05 23:49:06,766 [salt.state       ][INFO    ][25592] Executing state pkg.installed for aodh-evaluator
2018-06-05 23:49:07,752 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:49:07,882 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-06-05 23:49:15,349 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605234915335820
2018-06-05 23:49:15,376 [salt.minion      ][INFO    ][29201] Starting a new job with PID 29201
2018-06-05 23:49:15,443 [salt.minion      ][INFO    ][29201] Returning information for job: 20180605234915335820
2018-06-05 23:49:15,809 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:49:15,972 [salt.state       ][INFO    ][25592] Made the following changes:
'aodh-evaluator' changed from 'absent' to '5.1.0-2~u16.04+mcp7'

2018-06-05 23:49:16,042 [salt.state       ][INFO    ][25592] Loading fresh modules for state activity
2018-06-05 23:49:16,124 [salt.state       ][INFO    ][25592] Completed state [aodh-evaluator] at time 23:49:16.124389 duration_in_ms=9358.254
2018-06-05 23:49:16,143 [salt.state       ][INFO    ][25592] Running state [aodh-notifier] at time 23:49:16.143275
2018-06-05 23:49:16,143 [salt.state       ][INFO    ][25592] Executing state pkg.installed for aodh-notifier
2018-06-05 23:49:17,380 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:49:17,445 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-06-05 23:49:24,645 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:49:24,738 [salt.state       ][INFO    ][25592] Made the following changes:
'aodh-notifier' changed from 'absent' to '5.1.0-2~u16.04+mcp7'

2018-06-05 23:49:24,779 [salt.state       ][INFO    ][25592] Loading fresh modules for state activity
2018-06-05 23:49:24,840 [salt.state       ][INFO    ][25592] Completed state [aodh-notifier] at time 23:49:24.840868 duration_in_ms=8697.591
2018-06-05 23:49:24,859 [salt.state       ][INFO    ][25592] Running state [aodh-listener] at time 23:49:24.859825
2018-06-05 23:49:24,860 [salt.state       ][INFO    ][25592] Executing state pkg.installed for aodh-listener
2018-06-05 23:49:25,544 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:49:25,646 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-06-05 23:49:25,786 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605234925563287
2018-06-05 23:49:25,808 [salt.minion      ][INFO    ][29563] Starting a new job with PID 29563
2018-06-05 23:49:25,829 [salt.minion      ][INFO    ][29563] Returning information for job: 20180605234925563287
2018-06-05 23:49:33,164 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:49:33,254 [salt.state       ][INFO    ][25592] Made the following changes:
'aodh-listener' changed from 'absent' to '5.1.0-2~u16.04+mcp7'

2018-06-05 23:49:33,295 [salt.state       ][INFO    ][25592] Loading fresh modules for state activity
2018-06-05 23:49:33,356 [salt.state       ][INFO    ][25592] Completed state [aodh-listener] at time 23:49:33.353871 duration_in_ms=8494.044
2018-06-05 23:49:33,366 [salt.state       ][INFO    ][25592] Running state [python-aodhclient] at time 23:49:33.366430
2018-06-05 23:49:33,366 [salt.state       ][INFO    ][25592] Executing state pkg.installed for python-aodhclient
2018-06-05 23:49:34,173 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:49:34,239 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-06-05 23:49:35,732 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605234935717123
2018-06-05 23:49:35,784 [salt.minion      ][INFO    ][29875] Starting a new job with PID 29875
2018-06-05 23:49:35,832 [salt.minion      ][INFO    ][29875] Returning information for job: 20180605234935717123
2018-06-05 23:49:39,614 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:49:39,800 [salt.state       ][INFO    ][25592] Made the following changes:
'python-aodhclient' changed from 'absent' to '0.9.0-1~u16.04+mcp4'

2018-06-05 23:49:39,859 [salt.state       ][INFO    ][25592] Loading fresh modules for state activity
2018-06-05 23:49:39,930 [salt.state       ][INFO    ][25592] Completed state [python-aodhclient] at time 23:49:39.930889 duration_in_ms=6564.457
2018-06-05 23:49:39,938 [salt.state       ][INFO    ][25592] Running state [/etc/aodh/aodh.conf] at time 23:49:39.938491
2018-06-05 23:49:39,939 [salt.state       ][INFO    ][25592] Executing state file.managed for /etc/aodh/aodh.conf
2018-06-05 23:49:40,009 [salt.fileclient  ][INFO    ][25592] Fetching file from saltenv 'base', ** done ** 'aodh/files/pike/aodh.conf.Debian'
2018-06-05 23:49:40,221 [salt.state       ][INFO    ][25592] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -52,6 +51,12 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -78,6 +83,7 @@
 # is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
+log_dir = /var/log/aodh
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
@@ -91,12 +97,6 @@
 # is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
@@ -125,8 +125,8 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,iso8601=WARN,keystonemiddleware=WARN,oslo.messaging=INFO,oslo_messaging=INFO,qpid=WARN,requests.packages.urllib3.connectionpool=WARN,requests.packages.urllib3.util.retry=WARN,routes.middleware=WARN,sqlalchemy=WARN,stevedore=WARN,suds=INFO,taskflow=WARN,urllib3.connectionpool=WARN,urllib3.util.retry=WARN,websocket=WARN
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
@@ -158,6 +158,7 @@
 #
 
 # Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
 #rpc_conn_pool_size = 30
 
 # The pool size limit for connections expiration policy (integer value)
@@ -168,24 +169,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -198,21 +205,26 @@
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -227,20 +239,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -305,8 +321,7 @@
 # value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
@@ -316,6 +331,7 @@
 # A URL representing the messaging driver to use and its full configuration.
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -335,24 +351,34 @@
 # From aodh
 #
 
+port=8042
+
+host=10.167.4.34
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-E4oLNt/aodh-5.1.0/aodh/api/api-paste.ini
+#paste_config = /build/aodh-t4wvpD/aodh-4.0.0/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
 
-# Project name of resources creator in Gnocchi. (For example the Ceilometer
-# project name (string value)
-#gnocchi_external_project_owner = service
+# DEPRECATED: Enable deprecated combination alarms. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Combination alarms are deprecated. This option and combination alarms
+# will be removed in Aodh 5.0.
+#enable_combination_alarms = false
 
 # Maximum number of alarms defined for a user. (integer value)
+# Deprecated group/name - [DEFAULT]/user_alarm_quota
 #user_alarm_quota = <None>
 
 # Maximum number of alarms defined for a project. (integer value)
+# Deprecated group/name - [DEFAULT]/project_alarm_quota
 #project_alarm_quota = <None>
 
 # Maximum count of actions for each state of an alarm, non-positive number
 # means no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/alarm_max_actions
 #alarm_max_actions = -1
 
 
@@ -367,6 +393,7 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -414,9 +441,36 @@
 #allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
 
 
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
+
+
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -425,24 +479,34 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
+alarm_history_time_to_live = 86400
 
 #
 # From oslo.db
 #
 
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect
+# the database.
+#sqlite_db = oslo.sqlite
+
 # If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
 #sqlite_synchronous = true
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
+backend = sqlalchemy
 
 # The SQLAlchemy connection string to use to connect to the database. (string
 # value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-#connection = <None>
+connection = mysql+pymysql://aodh:opnfv_secret@10.167.4.23/aodh
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
@@ -454,10 +518,6 @@
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
 # Timeout before idle SQL connections are reaped. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
@@ -574,12 +634,27 @@
 # Complete "public" Identity API endpoint. This endpoint should not be an
 # "admin" endpoint, as it should be accessible by all end users.
 # Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should ideally be unversioned, client support in the
-# wild varies. If you're using a versioned v2 endpoint here, then this should
-# *not* be the same endpoint the service user utilizes for validating tokens,
-# because normal end users may not be able to reach that endpoint. (string
+# Although this endpoint should  ideally be unversioned, client support in the
+# wild varies.  If you're using a versioned v2 endpoint here, then this  should
+# *not* be the same endpoint the service user utilizes  for validating tokens,
+# because normal end users may not be  able to reach that endpoint. (string
 # value)
 #auth_uri = <None>
+
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = aodh
+password = opnfv_secret
+auth_uri = http://10.167.4.35:5000
+auth_url = http://10.167.4.35:35357
+interface = internalURL
+token_cache_time = -1
+
+#admin_user=aodh
+#admin_password=opnfv_secret
+#admin_tenant_name=service
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -731,43 +806,6 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Allowed values: http, https
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
@@ -787,6 +825,7 @@
 #workers = 1
 
 # The topic that aodh uses for event alarm evaluation. (string value)
+# Deprecated group/name - [DEFAULT]/event_alarm_topic
 #event_alarm_topic = alarm.all
 
 # Number of notification messages to wait before dispatching them. (integer
@@ -871,72 +910,61 @@
 
 # Name for the AMQP container. must be globally unique. Defaults to a generated
 # UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
 #container_name = <None>
 
 # Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
 #idle_timeout = 0
 
 # Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
 #trace = false
 
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
 # CA certificate PEM file used to verify the server's certificate (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
 #ssl_ca_file =
 
 # Self-identifying certificate PEM file for client authentication (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
 #ssl_cert_file =
 
 # Private key PEM file used to sign ssl_cert_file certificate (optional)
 # (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
 #ssl_key_file =
 
 # Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
 #ssl_key_password = <None>
 
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
 # DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Not applicable - not a SSL server
 #allow_insecure_clients = false
 
 # Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
 #sasl_mechanisms =
 
 # Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
 #sasl_config_dir =
 
 # Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
 #sasl_config_name =
 
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
 #username =
 
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
 #password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
@@ -990,21 +1018,16 @@
 # otherwise use routable addressing (string value)
 #addressing_mode = dynamic
 
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
 # address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
 #server_request_prefix = exclusive
 
 # address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
 #broadcast_prefix = broadcast
 
 # address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
 #group_request_prefix = unicast
 
 # Address prefix for all generated RPC addresses (string value)
@@ -1092,7 +1115,7 @@
 # Max fetch bytes of Kafka consumer (integer value)
 #kafka_max_fetch_bytes = 1048576
 
-# Default timeout(s) for Kafka consumers (floating point value)
+# Default timeout(s) for Kafka consumers (integer value)
 #kafka_consumer_timeout = 1.0
 
 # Pool Size for Kafka Consumers (integer value)
@@ -1136,11 +1159,7 @@
 # Deprecated group/name - [rpc_notifier2]/topics
 # Deprecated group/name - [DEFAULT]/notification_topics
 #topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
+topics = notifications
 
 
 [oslo_messaging_rabbit]
@@ -1153,33 +1172,33 @@
 # Deprecated group/name - [DEFAULT]/amqp_durable_queues
 # Deprecated group/name - [DEFAULT]/rabbit_durable_queues
 #amqp_durable_queues = false
+amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
 #amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
 
 # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
 # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
 # distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
 
 # SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
 
 # SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
 
 # SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
 #kombu_reconnect_delay = 1.0
 
 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
@@ -1199,6 +1218,7 @@
 
 # DEPRECATED: The RabbitMQ broker address where a single node is used. (string
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1208,34 +1228,46 @@
 # value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_port = 5672
 
 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_hosts = $rabbit_host:$rabbit_port
 
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
 # DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_userid = guest
+rabbit_userid = openstack
 
 # DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_password = guest
+rabbit_password = opnfv_secret
 
 # The RabbitMQ login method. (string value)
 # Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
 #rabbit_login_method = AMQPLAIN
 
 # DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1246,6 +1278,7 @@
 
 # How long to backoff for between retries when connecting to RabbitMQ. (integer
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
 #rabbit_retry_backoff = 2
 
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
@@ -1254,6 +1287,7 @@
 
 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
 # (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #rabbit_max_retries = 0
@@ -1264,6 +1298,7 @@
 # If you just want to make sure that all queues (except those with auto-
 # generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
 # HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
 #rabbit_ha_queues = false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
@@ -1286,6 +1321,7 @@
 #heartbeat_rate = 2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
 #fake_rabbit = false
 
 # Maximum number of channels to allow (integer value)
@@ -1296,6 +1332,9 @@
 
 # How often to send heartbeats for consumer's connections (integer value)
 #heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
 
 # Arguments passed to ssl.wrap_socket (dict value)
 #ssl_options = <None>
@@ -1401,24 +1440,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -1431,21 +1476,26 @@
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -1460,20 +1510,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -1557,9 +1611,12 @@
 #
 
 # The file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
 #policy_file = policy.json
+policy_file = /etc/aodh/policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
 #policy_default_rule = default
 
 # Directories where policy configuration files are stored. They can be relative
@@ -1567,6 +1624,7 @@
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
 #policy_dirs = policy.d
 
 
@@ -1579,12 +1637,14 @@
 # Region name to use for OpenStack service endpoints. (string value)
 # Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
+region_name = RegionOne
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
 # Allowed values: public, internal, admin, auth, publicURL, internalURL, adminURL
 # Deprecated group/name - [service_credentials]/os_endpoint_type
 #interface = public
+interface = internalURL
 
 #
 # From aodh-auth
@@ -1593,12 +1653,14 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [service_credentials]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://10.167.4.35:5000
 
 # Domain ID to scope to (string value)
 #domain_id = <None>
@@ -1607,15 +1669,17 @@
 #domain_name = <None>
 
 # Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
+# Deprecated group/name - [service_credentials]/tenant-id
 #project_id = <None>
 
 # Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
+# Deprecated group/name - [service_credentials]/tenant-name
 #project_name = <None>
+project_name = service
 
 # Domain ID containing project (string value)
 #project_domain_id = <None>
+project_domain_id = default
 
 # Domain name containing project (string value)
 #project_domain_name = <None>
@@ -1637,17 +1701,19 @@
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
+# Deprecated group/name - [service_credentials]/user-name
 #username = <None>
+username = aodh
 
 # User's domain id (string value)
 #user_domain_id = <None>
-
+user_domain_id = default
 # User's domain name (string value)
 #user_domain_name = <None>
 
 # User's password (string value)
 #password = <None>
+password = opnfv_secret
 
 
 [service_types]

2018-06-05 23:49:40,223 [salt.state       ][INFO    ][25592] Completed state [/etc/aodh/aodh.conf] at time 23:49:40.223199 duration_in_ms=284.708
2018-06-05 23:49:40,223 [salt.state       ][INFO    ][25592] Running state [/etc/default/aodh-evaluator] at time 23:49:40.223777
2018-06-05 23:49:40,224 [salt.state       ][INFO    ][25592] Executing state file.managed for /etc/default/aodh-evaluator
2018-06-05 23:49:40,252 [salt.fileclient  ][INFO    ][25592] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-06-05 23:49:40,258 [salt.state       ][INFO    ][25592] File changed:
New file
2018-06-05 23:49:40,259 [salt.state       ][INFO    ][25592] Completed state [/etc/default/aodh-evaluator] at time 23:49:40.259190 duration_in_ms=35.413
2018-06-05 23:49:40,266 [salt.state       ][INFO    ][25592] Running state [/etc/default/aodh-notifier] at time 23:49:40.266263
2018-06-05 23:49:40,266 [salt.state       ][INFO    ][25592] Executing state file.managed for /etc/default/aodh-notifier
2018-06-05 23:49:40,291 [salt.state       ][INFO    ][25592] File changed:
New file
2018-06-05 23:49:40,291 [salt.state       ][INFO    ][25592] Completed state [/etc/default/aodh-notifier] at time 23:49:40.291328 duration_in_ms=25.065
2018-06-05 23:49:40,292 [salt.state       ][INFO    ][25592] Running state [/etc/default/aodh-listener] at time 23:49:40.292499
2018-06-05 23:49:40,293 [salt.state       ][INFO    ][25592] Executing state file.managed for /etc/default/aodh-listener
2018-06-05 23:49:40,335 [salt.state       ][INFO    ][25592] File changed:
New file
2018-06-05 23:49:40,335 [salt.state       ][INFO    ][25592] Completed state [/etc/default/aodh-listener] at time 23:49:40.335889 duration_in_ms=43.39
2018-06-05 23:49:40,345 [salt.state       ][INFO    ][25592] Running state [aodh-dbsync] at time 23:49:40.345723
2018-06-05 23:49:40,346 [salt.state       ][INFO    ][25592] Executing state cmd.run for aodh-dbsync
2018-06-05 23:49:40,351 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command 'aodh-dbsync' in directory '/root'
2018-06-05 23:49:43,764 [salt.state       ][INFO    ][25592] {'pid': 29956, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-06-05 23:49:43,767 [salt.state       ][INFO    ][25592] Completed state [aodh-dbsync] at time 23:49:43.766560 duration_in_ms=3420.833
2018-06-05 23:49:43,769 [salt.state       ][INFO    ][25592] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 23:49:43.769052
2018-06-05 23:49:43,770 [salt.state       ][INFO    ][25592] Executing state file.managed for /etc/apache2/sites-available/aodh-api.conf
2018-06-05 23:49:43,815 [salt.fileclient  ][INFO    ][25592] Fetching file from saltenv 'base', ** done ** 'aodh/files/pike/apache-aodh.apache2.conf.Debian'
2018-06-05 23:49:43,912 [salt.state       ][INFO    ][25592] File changed:
--- 
+++ 
@@ -1,18 +1,5 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 10.167.4.34:8042
 
 <VirtualHost *:8042>
     WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-06-05 23:49:43,916 [salt.state       ][INFO    ][25592] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 23:49:43.916345 duration_in_ms=147.295
2018-06-05 23:49:43,917 [salt.state       ][INFO    ][25592] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 23:49:43.917495
2018-06-05 23:49:43,918 [salt.state       ][INFO    ][25592] Executing state file.symlink for /etc/apache2/sites-enabled/aodh-api.conf
2018-06-05 23:49:43,932 [salt.state       ][INFO    ][25592] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-06-05 23:49:43,932 [salt.state       ][INFO    ][25592] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 23:49:43.932625 duration_in_ms=15.13
2018-06-05 23:49:44,616 [salt.state       ][INFO    ][25592] Running state [apache2] at time 23:49:44.616603
2018-06-05 23:49:44,617 [salt.state       ][INFO    ][25592] Executing state service.running for apache2
2018-06-05 23:49:44,619 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-06-05 23:49:44,671 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-06-05 23:49:44,713 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:49:44,761 [salt.state       ][INFO    ][25592] The service apache2 is already running
2018-06-05 23:49:44,762 [salt.state       ][INFO    ][25592] Completed state [apache2] at time 23:49:44.762761 duration_in_ms=146.148
2018-06-05 23:49:44,764 [salt.state       ][INFO    ][25592] Running state [apache2] at time 23:49:44.763970
2018-06-05 23:49:44,765 [salt.state       ][INFO    ][25592] Executing state service.mod_watch for apache2
2018-06-05 23:49:44,768 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-06-05 23:49:44,807 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:49:44,854 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-06-05 23:49:45,770 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605234945756153
2018-06-05 23:49:45,809 [salt.minion      ][INFO    ][30026] Starting a new job with PID 30026
2018-06-05 23:49:45,855 [salt.minion      ][INFO    ][30026] Returning information for job: 20180605234945756153
2018-06-05 23:49:47,467 [salt.state       ][INFO    ][25592] {'apache2': True}
2018-06-05 23:49:47,470 [salt.state       ][INFO    ][25592] Completed state [apache2] at time 23:49:47.470611 duration_in_ms=2706.64
2018-06-05 23:49:47,481 [salt.state       ][INFO    ][25592] Running state [aodh-evaluator] at time 23:49:47.480241
2018-06-05 23:49:47,483 [salt.state       ][INFO    ][25592] Executing state service.running for aodh-evaluator
2018-06-05 23:49:47,486 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-06-05 23:49:47,541 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-06-05 23:49:47,583 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-06-05 23:49:47,625 [salt.state       ][INFO    ][25592] The service aodh-evaluator is already running
2018-06-05 23:49:47,626 [salt.state       ][INFO    ][25592] Completed state [aodh-evaluator] at time 23:49:47.626590 duration_in_ms=146.345
2018-06-05 23:49:47,628 [salt.state       ][INFO    ][25592] Running state [aodh-evaluator] at time 23:49:47.628012
2018-06-05 23:49:47,629 [salt.state       ][INFO    ][25592] Executing state service.mod_watch for aodh-evaluator
2018-06-05 23:49:47,632 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-06-05 23:49:47,665 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-06-05 23:49:47,697 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-06-05 23:49:47,986 [salt.state       ][INFO    ][25592] {'aodh-evaluator': True}
2018-06-05 23:49:47,987 [salt.state       ][INFO    ][25592] Completed state [aodh-evaluator] at time 23:49:47.987544 duration_in_ms=359.533
2018-06-05 23:49:47,991 [salt.state       ][INFO    ][25592] Running state [aodh-notifier] at time 23:49:47.991015
2018-06-05 23:49:47,991 [salt.state       ][INFO    ][25592] Executing state service.running for aodh-notifier
2018-06-05 23:49:47,993 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-06-05 23:49:48,062 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-06-05 23:49:48,117 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-06-05 23:49:48,150 [salt.state       ][INFO    ][25592] The service aodh-notifier is already running
2018-06-05 23:49:48,151 [salt.state       ][INFO    ][25592] Completed state [aodh-notifier] at time 23:49:48.151431 duration_in_ms=160.412
2018-06-05 23:49:48,152 [salt.state       ][INFO    ][25592] Running state [aodh-notifier] at time 23:49:48.152206
2018-06-05 23:49:48,153 [salt.state       ][INFO    ][25592] Executing state service.mod_watch for aodh-notifier
2018-06-05 23:49:48,154 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-06-05 23:49:48,207 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-06-05 23:49:48,245 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-06-05 23:49:55,805 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605234955790277
2018-06-05 23:49:55,827 [salt.minion      ][INFO    ][30231] Starting a new job with PID 30231
2018-06-05 23:49:55,865 [salt.minion      ][INFO    ][30231] Returning information for job: 20180605234955790277
2018-06-05 23:50:06,021 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235006000577
2018-06-05 23:50:06,058 [salt.minion      ][INFO    ][30243] Starting a new job with PID 30243
2018-06-05 23:50:06,100 [salt.minion      ][INFO    ][30243] Returning information for job: 20180605235006000577
2018-06-05 23:50:16,240 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235016222787
2018-06-05 23:50:16,274 [salt.minion      ][INFO    ][30248] Starting a new job with PID 30248
2018-06-05 23:50:16,314 [salt.minion      ][INFO    ][30248] Returning information for job: 20180605235016222787
2018-06-05 23:50:26,466 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235026448317
2018-06-05 23:50:26,494 [salt.minion      ][INFO    ][30253] Starting a new job with PID 30253
2018-06-05 23:50:26,528 [salt.minion      ][INFO    ][30253] Returning information for job: 20180605235026448317
2018-06-05 23:50:36,682 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235036664252
2018-06-05 23:50:36,720 [salt.minion      ][INFO    ][30258] Starting a new job with PID 30258
2018-06-05 23:50:36,766 [salt.minion      ][INFO    ][30258] Returning information for job: 20180605235036664252
2018-06-05 23:50:46,714 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235046695722
2018-06-05 23:50:46,753 [salt.minion      ][INFO    ][30263] Starting a new job with PID 30263
2018-06-05 23:50:46,802 [salt.minion      ][INFO    ][30263] Returning information for job: 20180605235046695722
2018-06-05 23:50:53,593 [salt.state       ][INFO    ][25592] {'aodh-notifier': True}
2018-06-05 23:50:53,595 [salt.state       ][INFO    ][25592] Completed state [aodh-notifier] at time 23:50:53.594818 duration_in_ms=65442.61
2018-06-05 23:50:53,606 [salt.state       ][INFO    ][25592] Running state [aodh-listener] at time 23:50:53.606257
2018-06-05 23:50:53,607 [salt.state       ][INFO    ][25592] Executing state service.running for aodh-listener
2018-06-05 23:50:53,620 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-06-05 23:50:53,662 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-06-05 23:50:53,698 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-06-05 23:50:53,725 [salt.state       ][INFO    ][25592] The service aodh-listener is already running
2018-06-05 23:50:53,726 [salt.state       ][INFO    ][25592] Completed state [aodh-listener] at time 23:50:53.726062 duration_in_ms=119.801
2018-06-05 23:50:53,726 [salt.state       ][INFO    ][25592] Running state [aodh-listener] at time 23:50:53.726850
2018-06-05 23:50:53,727 [salt.state       ][INFO    ][25592] Executing state service.mod_watch for aodh-listener
2018-06-05 23:50:53,729 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-06-05 23:50:53,753 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-06-05 23:50:53,777 [salt.loaded.int.module.cmdmod][INFO    ][25592] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-06-05 23:50:56,754 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235056735436
2018-06-05 23:50:56,801 [salt.minion      ][INFO    ][30331] Starting a new job with PID 30331
2018-06-05 23:50:56,837 [salt.minion      ][INFO    ][30331] Returning information for job: 20180605235056735436
2018-06-05 23:51:06,795 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235106774330
2018-06-05 23:51:06,830 [salt.minion      ][INFO    ][30338] Starting a new job with PID 30338
2018-06-05 23:51:06,874 [salt.minion      ][INFO    ][30338] Returning information for job: 20180605235106774330
2018-06-05 23:51:17,050 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235117029562
2018-06-05 23:51:17,089 [salt.minion      ][INFO    ][30343] Starting a new job with PID 30343
2018-06-05 23:51:17,132 [salt.minion      ][INFO    ][30343] Returning information for job: 20180605235117029562
2018-06-05 23:51:27,074 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235127057227
2018-06-05 23:51:27,111 [salt.minion      ][INFO    ][30348] Starting a new job with PID 30348
2018-06-05 23:51:27,172 [salt.minion      ][INFO    ][30348] Returning information for job: 20180605235127057227
2018-06-05 23:51:37,122 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235137101883
2018-06-05 23:51:37,161 [salt.minion      ][INFO    ][30353] Starting a new job with PID 30353
2018-06-05 23:51:37,206 [salt.minion      ][INFO    ][30353] Returning information for job: 20180605235137101883
2018-06-05 23:51:47,171 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235147151051
2018-06-05 23:51:47,207 [salt.minion      ][INFO    ][30359] Starting a new job with PID 30359
2018-06-05 23:51:47,250 [salt.minion      ][INFO    ][30359] Returning information for job: 20180605235147151051
2018-06-05 23:51:57,221 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235157203536
2018-06-05 23:51:57,257 [salt.minion      ][INFO    ][30364] Starting a new job with PID 30364
2018-06-05 23:51:57,302 [salt.minion      ][INFO    ][30364] Returning information for job: 20180605235157203536
2018-06-05 23:51:59,102 [salt.state       ][INFO    ][25592] {'aodh-listener': True}
2018-06-05 23:51:59,103 [salt.state       ][INFO    ][25592] Completed state [aodh-listener] at time 23:51:59.103431 duration_in_ms=65376.579
2018-06-05 23:51:59,123 [salt.minion      ][INFO    ][25592] Returning information for job: 20180605234834862711
2018-06-05 23:55:29,664 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command state.sls with jid 20180605235529646850
2018-06-05 23:55:29,707 [salt.minion      ][INFO    ][30440] Starting a new job with PID 30440
2018-06-05 23:55:32,399 [salt.state       ][INFO    ][30440] Loading fresh modules for state activity
2018-06-05 23:55:32,520 [salt.fileclient  ][INFO    ][30440] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-06-05 23:55:32,573 [salt.fileclient  ][INFO    ][30440] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-06-05 23:55:35,114 [salt.state       ][INFO    ][30440] Running state [ceilometer-api] at time 23:55:35.114075
2018-06-05 23:55:35,114 [salt.state       ][INFO    ][30440] Executing state pkg.installed for ceilometer-api
2018-06-05 23:55:35,115 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:55:36,059 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-api'] in directory '/root'
2018-06-05 23:55:36,270 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-06-05 23:55:39,780 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235539759475
2018-06-05 23:55:39,828 [salt.minion      ][INFO    ][30833] Starting a new job with PID 30833
2018-06-05 23:55:39,868 [salt.minion      ][INFO    ][30833] Returning information for job: 20180605235539759475
2018-06-05 23:55:41,452 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:55:41,557 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-api'] in directory '/root'
2018-06-05 23:55:49,849 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235549832900
2018-06-05 23:55:49,885 [salt.minion      ][INFO    ][30944] Starting a new job with PID 30944
2018-06-05 23:55:49,933 [salt.minion      ][INFO    ][30944] Returning information for job: 20180605235549832900
2018-06-05 23:55:59,923 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235559905210
2018-06-05 23:55:59,966 [salt.minion      ][INFO    ][31135] Starting a new job with PID 31135
2018-06-05 23:56:00,029 [salt.minion      ][INFO    ][31135] Returning information for job: 20180605235559905210
2018-06-05 23:56:10,007 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235609992786
2018-06-05 23:56:10,035 [salt.minion      ][INFO    ][31372] Starting a new job with PID 31372
2018-06-05 23:56:10,061 [salt.minion      ][INFO    ][31372] Returning information for job: 20180605235609992786
2018-06-05 23:56:20,083 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235620061175
2018-06-05 23:56:20,125 [salt.minion      ][INFO    ][31540] Starting a new job with PID 31540
2018-06-05 23:56:20,287 [salt.minion      ][INFO    ][31540] Returning information for job: 20180605235620061175
2018-06-05 23:56:30,290 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235630268905
2018-06-05 23:56:30,331 [salt.minion      ][INFO    ][32547] Starting a new job with PID 32547
2018-06-05 23:56:30,386 [salt.minion      ][INFO    ][32547] Returning information for job: 20180605235630268905
2018-06-05 23:56:40,376 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235640360372
2018-06-05 23:56:40,407 [salt.minion      ][INFO    ][339] Starting a new job with PID 339
2018-06-05 23:56:40,458 [salt.minion      ][INFO    ][339] Returning information for job: 20180605235640360372
2018-06-05 23:56:50,459 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235650445512
2018-06-05 23:56:50,488 [salt.minion      ][INFO    ][545] Starting a new job with PID 545
2018-06-05 23:56:50,521 [salt.minion      ][INFO    ][545] Returning information for job: 20180605235650445512
2018-06-05 23:56:51,851 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:56:52,078 [salt.state       ][INFO    ][30440] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'python-kafka' changed from 'absent' to '1.3.2-1.1~u16.04+mcp2'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20150424.a25a16d-1ubuntu1.2'
'qemu-system-x86-64' changed from 'absent' to '1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.5'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'qemu-keymaps' changed from 'absent' to '1'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libvirt0' changed from 'absent' to '4.0.0-1.7~u16.04+mcp2'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'qemu-system-i386' changed from 'absent' to '1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1.7~u16.04+mcp2'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'ceilometer-api' changed from 'absent' to '1:9.0.5-2~u16.04+mcp16'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.9.2-1~u16.04+mcp4'
'python2.7-twisted-core' changed from 'absent' to '1'
'python-os-xenapi' changed from 'absent' to '0.2.0-1~u16.04+mcp3'
'ceilometer-common' changed from 'absent' to '1:9.0.5-2~u16.04+mcp16'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libvirt-daemon' changed from 'absent' to '4.0.0-1.7~u16.04+mcp2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'librados2' changed from 'absent' to '12.2.2-0ubuntu0.17.10.1~cloud0'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.2-0ubuntu0.17.10.1~cloud0'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-ceilometer' changed from 'absent' to '1:9.0.5-2~u16.04+mcp16'
'python-attr' changed from 'absent' to '15.2.0-1'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '0.1.9-1'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-06-05 23:56:52,174 [salt.state       ][INFO    ][30440] Loading fresh modules for state activity
2018-06-05 23:56:52,481 [salt.state       ][INFO    ][30440] Completed state [ceilometer-api] at time 23:56:52.481019 duration_in_ms=77366.943
2018-06-05 23:56:52,528 [salt.state       ][INFO    ][30440] Running state [ceilometer-agent-central] at time 23:56:52.528658
2018-06-05 23:56:52,529 [salt.state       ][INFO    ][30440] Executing state pkg.installed for ceilometer-agent-central
2018-06-05 23:56:54,349 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:56:54,474 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-06-05 23:57:00,521 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235700504930
2018-06-05 23:57:00,553 [salt.minion      ][INFO    ][721] Starting a new job with PID 721
2018-06-05 23:57:00,591 [salt.minion      ][INFO    ][721] Returning information for job: 20180605235700504930
2018-06-05 23:57:04,373 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:57:04,533 [salt.state       ][INFO    ][30440] Made the following changes:
'ceilometer-agent-central' changed from 'absent' to '1:9.0.5-2~u16.04+mcp16'

2018-06-05 23:57:04,602 [salt.state       ][INFO    ][30440] Loading fresh modules for state activity
2018-06-05 23:57:04,660 [salt.state       ][INFO    ][30440] Completed state [ceilometer-agent-central] at time 23:57:04.660622 duration_in_ms=12131.965
2018-06-05 23:57:04,669 [salt.state       ][INFO    ][30440] Running state [python-ceilometerclient] at time 23:57:04.669151
2018-06-05 23:57:04,669 [salt.state       ][INFO    ][30440] Executing state pkg.installed for python-ceilometerclient
2018-06-05 23:57:05,760 [salt.state       ][INFO    ][30440] All specified packages are already installed
2018-06-05 23:57:05,761 [salt.state       ][INFO    ][30440] Completed state [python-ceilometerclient] at time 23:57:05.761307 duration_in_ms=1092.155
2018-06-05 23:57:05,761 [salt.state       ][INFO    ][30440] Running state [ceilometer-agent-notification] at time 23:57:05.761646
2018-06-05 23:57:05,761 [salt.state       ][INFO    ][30440] Executing state pkg.installed for ceilometer-agent-notification
2018-06-05 23:57:05,798 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:57:05,870 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-06-05 23:57:10,637 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235710614443
2018-06-05 23:57:10,673 [salt.minion      ][INFO    ][986] Starting a new job with PID 986
2018-06-05 23:57:10,722 [salt.minion      ][INFO    ][986] Returning information for job: 20180605235710614443
2018-06-05 23:57:14,546 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:57:14,694 [salt.state       ][INFO    ][30440] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:9.0.5-2~u16.04+mcp16'

2018-06-05 23:57:14,737 [salt.state       ][INFO    ][30440] Loading fresh modules for state activity
2018-06-05 23:57:14,791 [salt.state       ][INFO    ][30440] Completed state [ceilometer-agent-notification] at time 23:57:14.791066 duration_in_ms=9029.42
2018-06-05 23:57:14,798 [salt.state       ][INFO    ][30440] Running state [python-elasticsearch] at time 23:57:14.798827
2018-06-05 23:57:14,799 [salt.state       ][INFO    ][30440] Executing state pkg.installed for python-elasticsearch
2018-06-05 23:57:15,619 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:57:15,762 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-elasticsearch'] in directory '/root'
2018-06-05 23:57:20,719 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235720703704
2018-06-05 23:57:20,745 [salt.minion      ][INFO    ][1310] Starting a new job with PID 1310
2018-06-05 23:57:20,823 [salt.minion      ][INFO    ][1310] Returning information for job: 20180605235720703704
2018-06-05 23:57:21,016 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:57:21,132 [salt.state       ][INFO    ][30440] Made the following changes:
'python-elasticsearch' changed from 'absent' to '1.6.0-1'

2018-06-05 23:57:21,180 [salt.state       ][INFO    ][30440] Loading fresh modules for state activity
2018-06-05 23:57:21,233 [salt.state       ][INFO    ][30440] Completed state [python-elasticsearch] at time 23:57:21.233236 duration_in_ms=6434.408
2018-06-05 23:57:21,241 [salt.state       ][INFO    ][30440] Running state [python-influxdb] at time 23:57:21.241870
2018-06-05 23:57:21,242 [salt.state       ][INFO    ][30440] Executing state pkg.installed for python-influxdb
2018-06-05 23:57:22,176 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:57:22,306 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-influxdb'] in directory '/root'
2018-06-05 23:57:27,348 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:57:27,456 [salt.state       ][INFO    ][30440] Made the following changes:
'python-influxdb' changed from 'absent' to '2.12.0-1'

2018-06-05 23:57:27,499 [salt.state       ][INFO    ][30440] Loading fresh modules for state activity
2018-06-05 23:57:27,557 [salt.state       ][INFO    ][30440] Completed state [python-influxdb] at time 23:57:27.557745 duration_in_ms=6315.874
2018-06-05 23:57:27,572 [salt.state       ][INFO    ][30440] Running state [python-pymongo] at time 23:57:27.572673
2018-06-05 23:57:27,573 [salt.state       ][INFO    ][30440] Executing state pkg.installed for python-pymongo
2018-06-05 23:57:29,432 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-06-05 23:57:29,500 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-pymongo'] in directory '/root'
2018-06-05 23:57:30,815 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235730800697
2018-06-05 23:57:30,864 [salt.minion      ][INFO    ][1544] Starting a new job with PID 1544
2018-06-05 23:57:30,921 [salt.minion      ][INFO    ][1544] Returning information for job: 20180605235730800697
2018-06-05 23:57:36,782 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-06-05 23:57:36,948 [salt.state       ][INFO    ][30440] Made the following changes:
'python-bson' changed from 'absent' to '3.2-1build1'
'python-gridfs' changed from 'absent' to '3.2-1build1'
'python-bson-ext' changed from 'absent' to '3.2-1build1'
'python-pymongo-ext' changed from 'absent' to '3.2-1build1'
'python2.7-gridfs' changed from 'absent' to '1'
'python2.7-pymongo' changed from 'absent' to '1'
'python2.7-bson-ext' changed from 'absent' to '1'
'python2.7-bson' changed from 'absent' to '1'
'python-pymongo' changed from 'absent' to '3.2-1build1'
'python2.7-pymongo-ext' changed from 'absent' to '1'

2018-06-05 23:57:37,244 [salt.state       ][INFO    ][30440] Loading fresh modules for state activity
2018-06-05 23:57:37,306 [salt.state       ][INFO    ][30440] Completed state [python-pymongo] at time 23:57:37.306400 duration_in_ms=9733.723
2018-06-05 23:57:37,327 [salt.state       ][INFO    ][30440] Running state [/etc/ceilometer/ceilometer.conf] at time 23:57:37.327893
2018-06-05 23:57:37,329 [salt.state       ][INFO    ][30440] Executing state file.managed for /etc/ceilometer/ceilometer.conf
2018-06-05 23:57:37,403 [salt.fileclient  ][INFO    ][30440] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/ceilometer-server.conf.Debian'
2018-06-05 23:57:37,726 [salt.state       ][INFO    ][30440] File changed:
--- 
+++ 
@@ -1,2173 +1,63 @@
 [DEFAULT]
-
-#
-# From ceilometer
-#
-
-# To reduce polling agent load, samples are sent to the notification agent in a
-# batch. To gain higher throughput at the cost of load set this to False.
-# (boolean value)
-#batch_polled_samples = true
-
-# To reduce large requests at same time to Nova or other components from
-# different compute agents, shuffle start time of polling task. (integer value)
-#shuffle_time_before_polling_task = 0
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
-# Inspector to use for inspecting the hypervisor layer. Known inspectors are
-# libvirt, hyperv, vsphere and xenapi. (string value)
-#hypervisor_inspector = libvirt
-
-# Libvirt domain type. (string value)
-# Allowed values: kvm, lxc, qemu, uml, xen
-#libvirt_type = kvm
-
-# Override the default libvirt URI (which is dependent on libvirt_type).
-# (string value)
-#libvirt_uri =
-
-# DEPRECATED: Dispatchers to process metering data. (multi valued)
-# Deprecated group/name - [DEFAULT]/dispatcher
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: This option only be used in collector service, the collector service
-# has been deprecated and will be removed in the future, this should also be
-# deprecated for removal with collector service.
-#meter_dispatchers =
-
-# DEPRECATED: Dispatchers to process event data. (multi valued)
-# Deprecated group/name - [DEFAULT]/dispatcher
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: This option only be used in collector service, the collector service
-# has been deprecated and will be removed in the future, this should also be
-# deprecated for removal with collector service.
-#event_dispatchers =
-
-# Exchange name for Ironic notifications. (string value)
-#ironic_exchange = ironic
-
-# DEPRECATED: Allow novaclient's debug log output. (Use default_log_levels
-# instead) (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#nova_http_log_debug = false
-
-# Swift reseller prefix. Must be on par with reseller_prefix in proxy-
-# server.conf. (string value)
-#reseller_prefix = AUTH_
-
-# Configuration file for pipeline definition. (string value)
-#pipeline_cfg_file = pipeline.yaml
-
-# Configuration file for event pipeline definition. (string value)
-#event_pipeline_cfg_file = event_pipeline.yaml
-
-# Source for samples emitted on this instance. (string value)
-#sample_source = openstack
-
-# List of metadata prefixes reserved for metering use. (list value)
-#reserved_metadata_namespace = metering.
-
-# Limit on length of reserved metadata values. (integer value)
-#reserved_metadata_length = 256
-
-# List of metadata keys reserved for metering use. And these keys are
-# additional to the ones included in the namespace. (list value)
-#reserved_metadata_keys =
-
-# Path to the rootwrap configuration file to use for running commands as root
-# (string value)
-#rootwrap_config = /etc/ceilometer/rootwrap.conf
-
-# DEPRECATED: Exchange name for Nova notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#nova_control_exchange = nova
-
-# DEPRECATED: Exchange name for Neutron notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#neutron_control_exchange = neutron
-
-# DEPRECATED: Exchange name for Heat notifications (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#heat_control_exchange = heat
-
-# DEPRECATED: Exchange name for Glance notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#glance_control_exchange = glance
-
-# DEPRECATED: Exchange name for Keystone notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#keystone_control_exchange = keystone
-
-# DEPRECATED: Exchange name for Cinder notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#cinder_control_exchange = cinder
-
-# DEPRECATED: Exchange name for Data Processing notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#sahara_control_exchange = sahara
-
-# DEPRECATED: Exchange name for Swift notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#swift_control_exchange = swift
-
-# DEPRECATED: Exchange name for Magnum notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#magnum_control_exchange = magnum
-
-# DEPRECATED: Exchange name for DBaaS notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#trove_control_exchange = trove
-
-# DEPRECATED: Exchange name for Messaging service notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#zaqar_control_exchange = zaqar
-
-# DEPRECATED: Exchange name for DNS service notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#dns_control_exchange = central
-
-# DEPRECATED: Exchange name for ceilometer notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#ceilometer_control_exchange = ceilometer
-
-# Name of this node, which must be valid in an AMQP key. Can be an opaque
-# identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
-#host = <your_hostname>
-
-# Timeout seconds for HTTP requests. Set it to None to disable timeout.
-# (integer value)
-#http_timeout = 600
-
-# Maximum number of parallel requests for services to handle at the same time.
-# (integer value)
-# Minimum value: 1
-#max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# A URL representing the messaging driver to use and its full configuration.
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[api]
-
-#
-# From ceilometer
-#
-
-# Default maximum number of items returned by API request. (integer value)
-# Minimum value: 1
-#default_api_return_limit = 100
-
-# Set True to disable resource/meter/sample URLs. Default autodetection by
-# querying keystone. (boolean value)
-#gnocchi_is_enabled = <None>
-
-# Set True to redirect alarms URLs to aodh. Default autodetection by querying
-# keystone. (boolean value)
-#aodh_is_enabled = <None>
-
-# The endpoint of Aodh to redirect alarms URLs to Aodh API. Default
-# autodetection by querying keystone. (string value)
-#aodh_url = <None>
-
-# Set True to redirect events URLs to Panko. Default autodetection by querying
-# keystone. (boolean value)
-#panko_is_enabled = <None>
-
-# The endpoint of Panko to redirect events URLs to Panko API. Default
-# autodetection by querying keystone. (string value)
-#panko_url = <None>
-
-
-[collector]
-
-#
-# From ceilometer
-#
-
-# Address to which the UDP socket is bound. Set to an empty string to disable.
-# (unknown value)
-#udp_address = 0.0.0.0
-
-# Port to which the UDP socket is bound. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#udp_port = 4952
-
-# Number of notification messages to wait before dispatching them (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely) (integer value)
-#batch_timeout = <None>
-
-# Number of workers for collector service. default value is 1. (integer value)
-# Minimum value: 1
-# Deprecated group/name - [DEFAULT]/collector_workers
-#workers = 1
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Enable work-load partitioning, allowing multiple compute agents
-# to be run simultaneously. (replaced by instance_discovery_method) (boolean
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#workload_partitioning = false
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Allowed values: naive, workload_partitioning, libvirt_metadata
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline.  (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will works only
-# when 'instance_discovery_method' was set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
-
+executor_thread_pool_size = 5
+transport_url = rabbit://openstack:opnfv_secret@10.167.4.28:5672,openstack:opnfv_secret@10.167.4.29:5672,openstack:opnfv_secret@10.167.4.30:5672//openstack
 
 [coordination]
-
-#
-# From ceilometer
-#
-
-# The backend URL to use for distributed coordination. If left empty, per-
-# deployment central agent and per-host compute agent won't do workload
-# partitioning and will only function correctly if a single instance of that
-# service is running. (string value)
-#backend_url = <None>
-
-# Number of seconds between checks to see if group membership has changed
-# (floating point value)
-#check_watchers = 10.0
+backend_url = redis://10.167.4.32:26379?sentinel=master_1&sentinel_fallback=10.167.4.33:26379&sentinel_fallback=10.167.4.34:26379
 
 
 [cors]
 
-#
-# From oslo.middleware.cors
-#
 
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
 
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
 
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
 
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
 
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
 
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
+
+
+
+
+
+
 
 
 [database]
-
-#
-# From ceilometer
-#
-
-# Number of seconds that samples are kept in the database for (<= 0 means
-# forever). (integer value)
-# Deprecated group/name - [database]/time_to_live
-#metering_time_to_live = -1
-
-# The connection string used to connect to the metering database. (if unset,
-# connection is used) (string value)
-#metering_connection = <None>
-
-# Indicates if expirer expires only samples. If set true, expired samples will
-# be deleted, but residual resource and meter definition data will remain.
-# (boolean value)
-#sql_expire_samples_only = false
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Timeout before idle SQL connections are reaped. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#idle_timeout = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-
-[dispatcher_file]
-
-#
-# From ceilometer
-#
-
-# Name and the location of the file to record meters. (string value)
-#file_path = <None>
-
-# The max size of the file. (integer value)
-#max_bytes = 0
-
-# The max number of the files to keep. (integer value)
-#backup_count = 0
-
-
 [dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# Filter out samples generated by Gnocchi service activity (boolean value)
-#filter_service_activity = true
-
-# Gnocchi project used to filter out samples generated by Gnocchi service
-# activity (string value)
-#filter_project = gnocchi
-
-# The archive policy to use when the dispatcher create a new metric. (string
-# value)
-#archive_policy = <None>
-
-# The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-#resources_definition_file = gnocchi_resources.yaml
-
-# Number of seconds before request to gnocchi times out (floating point value)
-# Minimum value: 0
-#request_timeout = 6.05
-
-
-[dispatcher_http]
-
-#
-# From ceilometer
-#
-
-# The target where the http request will be sent. If this is not set, no data
-# will be posted. For example: target = http://hostname:1234/path (string
-# value)
-#target =
-
-# The target for event data where the http request will be sent to. If this is
-# not set, it will default to same as Sample target. (string value)
-#event_target = <None>
-
-# The max time in seconds to wait for a request to timeout. (integer value)
-#timeout = 5
-
-# The path to a server certificate or directory if the system CAs are not used
-# or if a self-signed certificate is used. Set to False to ignore SSL cert
-# verification. (string value)
-#verify_ssl = <None>
-
-# Indicates whether samples are published in a batch. (boolean value)
-#batch_mode = false
-
-
-[event]
-
-#
-# From ceilometer
-#
-
-# Configuration file for event definitions. (string value)
-#definitions_cfg_file = event_definitions.yaml
-
-# Drop notifications if no event definition matches. (Otherwise, we convert
-# them with just the default traits) (boolean value)
-#drop_unmatched_notifications = false
-
-# Store the raw notification for select priority levels (info and/or error). By
-# default, raw details are not captured. (multi valued)
-#store_raw =
-
-
-[hardware]
-
-#
-# From ceilometer
-#
-
-# URL scheme to use for hardware nodes. (string value)
-#url_scheme = snmp://
-
-# SNMPd user name of all nodes running in the cloud. (string value)
-#readonly_user_name = ro_snmp_user
-
-# SNMPd v3 authentication password of all the nodes running in the cloud.
-# (string value)
-#readonly_user_password = password
-
-# SNMPd v3 authentication algorithm of all the nodes running in the cloud
-# (string value)
-# Allowed values: md5, sha
-#readonly_user_auth_proto = <None>
-
-# SNMPd v3 encryption algorithm of all the nodes running in the cloud (string
-# value)
-# Allowed values: des, aes128, 3des, aes192, aes256
-#readonly_user_priv_proto = <None>
-
-# SNMPd v3 encryption password of all the nodes running in the cloud. (string
-# value)
-#readonly_user_priv_password = <None>
-
-# Name of the control plane Tripleo network (string value)
-#tripleo_network_name = ctlplane
-
-# Configuration file for defining hardware snmp meters. (string value)
-#meter_definitions_file = snmp.yaml
-
-
-[ipmi]
-
-#
-# From ceilometer
-#
-
-# Number of retries upon Intel Node Manager initialization failure (integer
-# value)
-#node_manager_init_retry = 3
-
-# Tolerance of IPMI/NM polling failures before disable this pollster. Negative
-# indicates retrying forever. (integer value)
-#polling_retry = 3
-
+filter_project = service
+archive_policy = medium
 
 [keystone_authtoken]
 
-#
-# From keystonemiddleware.auth_token
-#
-
-# Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should ideally be unversioned, client support in the
-# wild varies. If you're using a versioned v2 endpoint here, then this should
-# *not* be the same endpoint the service user utilizes for validating tokens,
-# because normal end users may not be able to reach that endpoint. (string
-# value)
-#auth_uri = <None>
-
-# API version of the admin Identity API endpoint. (string value)
-#auth_version = <None>
-
-# Do not handle authorization requests within the middleware, but delegate the
-# authorization decision to downstream WSGI components. (boolean value)
-#delay_auth_decision = false
-
-# Request timeout value for communicating with Identity API server. (integer
-# value)
-#http_connect_timeout = <None>
-
-# How many times are we trying to reconnect when communicating with Identity
-# API Server. (integer value)
-#http_request_max_retries = 3
-
-# Request environment key where the Swift cache object is stored. When
-# auth_token middleware is deployed with a Swift cache, use this option to have
-# the middleware share a caching backend with swift. Otherwise, use the
-# ``memcached_servers`` option instead. (string value)
-#cache = <None>
-
-# Required if identity server requires client certificate (string value)
-#certfile = <None>
-
-# Required if identity server requires client certificate (string value)
-#keyfile = <None>
-
-# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# Defaults to system CAs. (string value)
-#cafile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# The region in which the identity server can be found. (string value)
-#region_name = <None>
-
-# DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P
-# release. (string value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#signing_dir = <None>
-
-# Optionally specify a list of memcached server(s) to use for caching. If left
-# undefined, tokens will instead be cached in-process. (list value)
-# Deprecated group/name - [keystone_authtoken]/memcache_servers
-#memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Allowed values: None, MAC, ENCRYPT
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead before it is
-# tried again. (integer value)
-#memcache_pool_dead_retry = 300
-
-# (Optional) Maximum total number of open connections to every memcached
-# server. (integer value)
-#memcache_pool_maxsize = 10
-
-# (Optional) Socket timeout in seconds for communicating with a memcached
-# server. (integer value)
-#memcache_pool_socket_timeout = 3
-
-# (Optional) Number of seconds a connection to memcached is held unused in the
-# pool before it is closed. (integer value)
-#memcache_pool_unused_timeout = 60
-
-# (Optional) Number of seconds that an operation will wait to get a memcached
-# client connection from the pool. (integer value)
-#memcache_pool_conn_get_timeout = 10
-
-# (Optional) Use the advanced (eventlet safe) memcached client pool. The
-# advanced pool will only work under python 2.x. (boolean value)
-#memcache_use_advanced_pool = false
-
-# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
-# middleware will not ask for service catalog on token validation and will not
-# set the X-Service-Catalog header. (boolean value)
-#include_service_catalog = true
-
-# Used to control the use and type of token binding. Can be set to: "disabled"
-# to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it
-# if not. "strict" like "permissive" but if the bind type is unknown the token
-# will be rejected. "required" any form of token binding is needed to be
-# allowed. Finally the name of a binding method that must be present in tokens.
-# (string value)
-#enforce_token_bind = permissive
-
-# DEPRECATED: If true, the revocation list will be checked for cached tokens.
-# This requires that PKI tokens are configured on the identity server. (boolean
-# value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#check_revocations_for_cached = false
-
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
-# single algorithm or multiple. The algorithms are those supported by Python
-# standard hashlib.new(). The hashes will be tried in the order given, so put
-# the preferred one first for performance. The result of the first hash will be
-# stored in the cache. This will typically be set to multiple values only while
-# migrating from a less secure algorithm to a more secure one. Once all the old
-# tokens are expired this option should be set to a single value for better
-# performance. (list value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#hash_algorithms = md5
-
-# A choice of roles that must be present in a service token. Service tokens are
-# allowed to request that an expired token can be used and so this check should
-# tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present.
-# For backwards compatibility reasons this currently only affects the
-# allow_expired check. (list value)
-#service_token_roles = service
-
-# For backwards compatibility reasons we must let valid service tokens pass
-# that don't pass the service_token_roles check as valid. Setting this true
-# will become the default in a future release and should be enabled if
-# possible. (boolean value)
-#service_token_roles_required = false
-
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Allowed values: http, https
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
-# Authentication type to load (string value)
-# Deprecated group/name - [keystone_authtoken]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[meter]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Configuration file for defining meter notifications. This option
-# is deprecated and use meter_definitions_dirs to configure meter notification
-# file. Meter definitions configuration file will be sought according to the
-# parameter. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#meter_definitions_cfg_file = <None>
-
-# List directory to find files of defining meter notifications. (multi valued)
-#meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-9vDuZD/ceilometer-9.0.5/ceilometer/data/meters.d
-
-
-[notification]
-
-#
-# From ceilometer
-#
-
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
-# Minimum value: 1
-#pipeline_processing_queues = 10
-
-# Acknowledge message when event persistence fails. (boolean value)
-#ack_on_event_error = true
-
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
-#workload_partitioning = false
-
-# Messaging URLs to listen for notifications. Example:
-# rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
-# (DEFAULT/transport_url is used if empty). This is useful when you have
-# dedicate messaging nodes for each service, for example, all nova
-# notifications go to rabbit-nova:5672, while all cinder notifications go to
-# rabbit-cinder:5672. (multi valued)
-#messaging_urls =
-
-# Number of notification messages to wait before publishing them. Batching is
-# advised when transformations are applied in pipeline. (integer value)
-# Minimum value: 1
-#batch_size = 100
-
-# Number of seconds to wait before publishing samples when batch_size is not
-# reached (None means indefinitely) (integer value)
-#batch_timeout = 5
-
-# Number of workers for notification service, default value is 1. (integer
-# value)
-# Minimum value: 1
-# Deprecated group/name - [DEFAULT]/notification_workers
-#workers = 1
-
-# Exchanges name to listen for notifications. (multi valued)
-# Deprecated group/name - [DEFAULT]/http_control_exchanges
-#notification_control_exchanges = nova
-#notification_control_exchanges = glance
-#notification_control_exchanges = neutron
-#notification_control_exchanges = cinder
-#notification_control_exchanges = heat
-#notification_control_exchanges = keystone
-#notification_control_exchanges = sahara
-#notification_control_exchanges = trove
-#notification_control_exchanges = zaqar
-#notification_control_exchanges = swift
-#notification_control_exchanges = ceilometer
-#notification_control_exchanges = magnum
-#notification_control_exchanges = dns
-
-
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# Pool Size for Kafka Consumers (integer value)
-#pool_size = 10
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = ceilometer
+password = opnfv_secret
+auth_uri = http://10.167.4.35:5000
+auth_url = http://10.167.4.35:35357
+interface = internal
+token_cache_time = -1
 
 [oslo_messaging_notifications]
 
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
+topics = notifications
 
 [oslo_messaging_rabbit]
 
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Allowed values: round-robin, shuffle
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Allowed values: new, single, read_write
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-
-[polling]
-
-#
-# From ceilometer
-#
-
-# Configuration file for pipeline definition. (string value)
-#cfg_file = polling.yaml
-
-# Work-load partitioning group prefix. Use only if you want to run multiple
-# polling agents with different config files. For each sub-group of the agent
-# pool with the same partitioning_group_prefix a disjoint subset of pollsters
-# should be loaded. (string value)
-#partitioning_group_prefix = <None>
-
-
 [publisher]
-
-#
-# From ceilometer
-#
-
-# Secret value for signing messages. Set value empty if signing is not required
-# to avoid computational overhead. (string value)
-# Deprecated group/name - [DEFAULT]/metering_secret
-# Deprecated group/name - [publisher_rpc]/metering_secret
-# Deprecated group/name - [publisher]/metering_secret
-#telemetry_secret = change this for valid signing
-
-
-[publisher_notifier]
-
-#
-# From ceilometer
-#
-
-# The topic that ceilometer uses for metering notifications. (string value)
-#metering_topic = metering
-
-# The topic that ceilometer uses for event notifications. (string value)
-#event_topic = event
-
-# The driver that ceilometer uses for metering notifications. (string value)
-# Deprecated group/name - [publisher_notifier]/metering_driver
-#telemetry_driver = messagingv2
-
-
-[rgw_admin_credentials]
-
-#
-# From ceilometer
-#
-
-# Access key for Radosgw Admin. (string value)
-#access_key = <None>
-
-# Secret key for Radosgw Admin. (string value)
-#secret_key = <None>
-
+telemetry_secret=opnfv_secret
 
 [service_credentials]
 
-#
-# From ceilometer-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-# Authentication URL (string value)
-#auth_url = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
-
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
-# Allowed values: public, internal, admin, auth, publicURL, internalURL, adminURL
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-
-[service_types]
-
-#
-# From ceilometer
-#
-
-# Glance service type. (string value)
-#glance = image
-
-# Neutron service type. (string value)
-#neutron = network
-
-# Neutron load balancer version. (string value)
-# Allowed values: v1, v2
-#neutron_lbaas_version = v2
-
-# Nova service type. (string value)
-#nova = compute
-
-# Radosgw service type. (string value)
-#radosgw = <None>
-
-# Swift service type. (string value)
-#swift = object-store
-
-# Cinder service type. (string value)
-# Deprecated group/name - [service_types]/cinderv2
-#cinder = volumev3
-
-
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = ceilometer
+password = opnfv_secret
+auth_url = http://10.167.4.35:5000
+token_cache_time = -1
+interface = internal
+region_name = RegionOne

2018-06-05 23:57:37,736 [salt.state       ][INFO    ][30440] Completed state [/etc/ceilometer/ceilometer.conf] at time 23:57:37.736134 duration_in_ms=408.242
2018-06-05 23:57:37,736 [salt.state       ][INFO    ][30440] Running state [/etc/default/ceilometer-agent-central] at time 23:57:37.736768
2018-06-05 23:57:37,737 [salt.state       ][INFO    ][30440] Executing state file.managed for /etc/default/ceilometer-agent-central
2018-06-05 23:57:37,767 [salt.fileclient  ][INFO    ][30440] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-06-05 23:57:37,778 [salt.state       ][INFO    ][30440] File changed:
New file
2018-06-05 23:57:37,778 [salt.state       ][INFO    ][30440] Completed state [/etc/default/ceilometer-agent-central] at time 23:57:37.778449 duration_in_ms=41.681
2018-06-05 23:57:37,779 [salt.state       ][INFO    ][30440] Running state [/etc/default/ceilometer-agent-notification] at time 23:57:37.779037
2018-06-05 23:57:37,779 [salt.state       ][INFO    ][30440] Executing state file.managed for /etc/default/ceilometer-agent-notification
2018-06-05 23:57:37,809 [salt.state       ][INFO    ][30440] File changed:
New file
2018-06-05 23:57:37,810 [salt.state       ][INFO    ][30440] Completed state [/etc/default/ceilometer-agent-notification] at time 23:57:37.809974 duration_in_ms=30.937
2018-06-05 23:57:37,828 [salt.state       ][INFO    ][30440] Running state [python-gnocchiclient] at time 23:57:37.828647
2018-06-05 23:57:37,832 [salt.state       ][INFO    ][30440] Executing state pkg.latest for python-gnocchiclient
2018-06-05 23:57:37,866 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-06-05 23:57:38,042 [salt.state       ][INFO    ][30440] Package python-gnocchiclient is already up-to-date
2018-06-05 23:57:38,042 [salt.state       ][INFO    ][30440] Completed state [python-gnocchiclient] at time 23:57:38.042775 duration_in_ms=214.127
2018-06-05 23:57:38,043 [salt.state       ][INFO    ][30440] Running state [/etc/ceilometer/pipeline.yaml] at time 23:57:38.043606
2018-06-05 23:57:38,044 [salt.state       ][INFO    ][30440] Executing state file.managed for /etc/ceilometer/pipeline.yaml
2018-06-05 23:57:38,095 [salt.fileclient  ][INFO    ][30440] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/pipeline.yaml'
2018-06-05 23:57:38,319 [salt.state       ][INFO    ][30440] File changed:
New file
2018-06-05 23:57:38,319 [salt.state       ][INFO    ][30440] Completed state [/etc/ceilometer/pipeline.yaml] at time 23:57:38.319801 duration_in_ms=276.195
2018-06-05 23:57:38,320 [salt.state       ][INFO    ][30440] Running state [/etc/ceilometer/event_pipeline.yaml] at time 23:57:38.320457
2018-06-05 23:57:38,320 [salt.state       ][INFO    ][30440] Executing state file.managed for /etc/ceilometer/event_pipeline.yaml
2018-06-05 23:57:38,345 [salt.fileclient  ][INFO    ][30440] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/event_pipeline.yaml'
2018-06-05 23:57:38,535 [salt.state       ][INFO    ][30440] File changed:
New file
2018-06-05 23:57:38,536 [salt.state       ][INFO    ][30440] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 23:57:38.536425 duration_in_ms=215.966
2018-06-05 23:57:38,537 [salt.state       ][INFO    ][30440] Running state [/etc/ceilometer/event_definitions.yaml] at time 23:57:38.537765
2018-06-05 23:57:38,538 [salt.state       ][INFO    ][30440] Executing state file.managed for /etc/ceilometer/event_definitions.yaml
2018-06-05 23:57:38,576 [salt.fileclient  ][INFO    ][30440] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/event_definitions.yaml'
2018-06-05 23:57:38,626 [salt.state       ][INFO    ][30440] File changed:
New file
2018-06-05 23:57:38,627 [salt.state       ][INFO    ][30440] Completed state [/etc/ceilometer/event_definitions.yaml] at time 23:57:38.627186 duration_in_ms=89.419
2018-06-05 23:57:38,628 [salt.state       ][INFO    ][30440] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 23:57:38.628524
2018-06-05 23:57:38,629 [salt.state       ][INFO    ][30440] Executing state file.managed for /etc/ceilometer/gabbi_pipeline.yaml
2018-06-05 23:57:38,661 [salt.fileclient  ][INFO    ][30440] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/gabbi_pipeline.yaml'
2018-06-05 23:57:38,667 [salt.state       ][INFO    ][30440] File changed:
New file
2018-06-05 23:57:38,668 [salt.state       ][INFO    ][30440] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 23:57:38.668341 duration_in_ms=39.817
2018-06-05 23:57:38,669 [salt.state       ][INFO    ][30440] Running state [/etc/apache2/sites-available/ceilometer-api.conf] at time 23:57:38.669604
2018-06-05 23:57:38,670 [salt.state       ][INFO    ][30440] Executing state file.managed for /etc/apache2/sites-available/ceilometer-api.conf
2018-06-05 23:57:38,699 [salt.fileclient  ][INFO    ][30440] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/ceilometer.apache2.conf.Debian'
2018-06-05 23:57:38,824 [salt.state       ][INFO    ][30440] File changed:
--- 
+++ 
@@ -1,7 +1,7 @@
-Listen 8777
+Listen 10.167.4.34:8777
 
 <VirtualHost *:8777>
-    WSGIDaemonProcess ceilometer-api processes=2 threads=10 user=ceilometer display-name=%{GROUP}
+    WSGIDaemonProcess ceilometer-api processes=2 threads=10 user=ceilometer group=ceilometer display-name=%{GROUP}
     WSGIProcessGroup ceilometer-api
     WSGIScriptAlias / /usr/share/ceilometer/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -9,5 +9,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/ceilometer_error.log
-    CustomLog /var/log/apache2/ceilometer_access.log combined
+    CustomLog /var/log/apache2/ceilometer_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-06-05 23:57:38,824 [salt.state       ][INFO    ][30440] Completed state [/etc/apache2/sites-available/ceilometer-api.conf] at time 23:57:38.824600 duration_in_ms=154.997
2018-06-05 23:57:38,825 [salt.state       ][INFO    ][30440] Running state [/etc/apache2/sites-enabled/ceilometer-api.conf] at time 23:57:38.825050
2018-06-05 23:57:38,825 [salt.state       ][INFO    ][30440] Executing state file.symlink for /etc/apache2/sites-enabled/ceilometer-api.conf
2018-06-05 23:57:38,834 [salt.state       ][INFO    ][30440] {'new': '/etc/apache2/sites-enabled/ceilometer-api.conf'}
2018-06-05 23:57:38,834 [salt.state       ][INFO    ][30440] Completed state [/etc/apache2/sites-enabled/ceilometer-api.conf] at time 23:57:38.834758 duration_in_ms=9.708
2018-06-05 23:57:39,420 [salt.state       ][INFO    ][30440] Running state [apache2] at time 23:57:39.420364
2018-06-05 23:57:39,433 [salt.state       ][INFO    ][30440] Executing state service.running for apache2
2018-06-05 23:57:39,434 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-06-05 23:57:39,494 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-06-05 23:57:39,547 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:57:39,607 [salt.state       ][INFO    ][30440] The service apache2 is already running
2018-06-05 23:57:39,609 [salt.state       ][INFO    ][30440] Completed state [apache2] at time 23:57:39.608834 duration_in_ms=188.465
2018-06-05 23:57:39,609 [salt.state       ][INFO    ][30440] Running state [apache2] at time 23:57:39.609635
2018-06-05 23:57:39,610 [salt.state       ][INFO    ][30440] Executing state service.mod_watch for apache2
2018-06-05 23:57:39,612 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-06-05 23:57:39,659 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-06-05 23:57:39,713 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-06-05 23:57:40,902 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command saltutil.find_job with jid 20180605235740888984
2018-06-05 23:57:40,941 [salt.minion      ][INFO    ][1751] Starting a new job with PID 1751
2018-06-05 23:57:40,987 [salt.minion      ][INFO    ][1751] Returning information for job: 20180605235740888984
2018-06-05 23:57:42,561 [salt.state       ][INFO    ][30440] {'apache2': True}
2018-06-05 23:57:42,562 [salt.state       ][INFO    ][30440] Completed state [apache2] at time 23:57:42.562814 duration_in_ms=2953.178
2018-06-05 23:57:42,567 [salt.state       ][INFO    ][30440] Running state [ceilometer-agent-central] at time 23:57:42.567063
2018-06-05 23:57:42,568 [salt.state       ][INFO    ][30440] Executing state service.running for ceilometer-agent-central
2018-06-05 23:57:42,570 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-06-05 23:57:42,628 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-06-05 23:57:42,662 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-06-05 23:57:42,710 [salt.state       ][INFO    ][30440] The service ceilometer-agent-central is already running
2018-06-05 23:57:42,710 [salt.state       ][INFO    ][30440] Completed state [ceilometer-agent-central] at time 23:57:42.710868 duration_in_ms=143.805
2018-06-05 23:57:42,711 [salt.state       ][INFO    ][30440] Running state [ceilometer-agent-central] at time 23:57:42.711296
2018-06-05 23:57:42,711 [salt.state       ][INFO    ][30440] Executing state service.mod_watch for ceilometer-agent-central
2018-06-05 23:57:42,713 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-06-05 23:57:42,761 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-06-05 23:57:42,799 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-06-05 23:57:43,111 [salt.state       ][INFO    ][30440] {'ceilometer-agent-central': True}
2018-06-05 23:57:43,112 [salt.state       ][INFO    ][30440] Completed state [ceilometer-agent-central] at time 23:57:43.112363 duration_in_ms=401.066
2018-06-05 23:57:43,114 [salt.state       ][INFO    ][30440] Running state [ceilometer-agent-notification] at time 23:57:43.114809
2018-06-05 23:57:43,115 [salt.state       ][INFO    ][30440] Executing state service.running for ceilometer-agent-notification
2018-06-05 23:57:43,116 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-06-05 23:57:43,188 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-06-05 23:57:43,229 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-06-05 23:57:43,318 [salt.state       ][INFO    ][30440] The service ceilometer-agent-notification is already running
2018-06-05 23:57:43,318 [salt.state       ][INFO    ][30440] Completed state [ceilometer-agent-notification] at time 23:57:43.318855 duration_in_ms=204.044
2018-06-05 23:57:43,319 [salt.state       ][INFO    ][30440] Running state [ceilometer-agent-notification] at time 23:57:43.319294
2018-06-05 23:57:43,319 [salt.state       ][INFO    ][30440] Executing state service.mod_watch for ceilometer-agent-notification
2018-06-05 23:57:43,325 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-06-05 23:57:43,362 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-06-05 23:57:43,435 [salt.loaded.int.module.cmdmod][INFO    ][30440] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-06-05 23:57:43,791 [salt.state       ][INFO    ][30440] {'ceilometer-agent-notification': True}
2018-06-05 23:57:43,792 [salt.state       ][INFO    ][30440] Completed state [ceilometer-agent-notification] at time 23:57:43.792000 duration_in_ms=472.706
2018-06-05 23:57:43,806 [salt.minion      ][INFO    ][30440] Returning information for job: 20180605235529646850
2018-06-05 23:58:19,775 [salt.utils.schedule][INFO    ][2682] Running scheduled job: __mine_interval
2018-06-06 00:09:21,163 [salt.minion      ][INFO    ][2682] User sudo_ubuntu Executing command cp.push_dir with jid 20180606000921150127
2018-06-06 00:09:21,215 [salt.minion      ][INFO    ][2083] Starting a new job with PID 2083
