2019-11-21 06:17:41,947 [salt.utils       :831 ][ERROR   ][1661] DNS lookup or connection check of 'salt' failed.
2019-11-21 06:17:41,947 [salt.minion      :152 ][ERROR   ][1661] Master hostname: 'salt' not found or not responsive. Retrying in 30 seconds
2019-11-21 06:17:45,240 [salt.utils.parsers:1051][WARNING ][1661] Minion received a SIGTERM. Exiting.
2019-11-21 06:18:26,991 [salt.minion      :870 ][ERROR   ][1889] Error while bringing up minion for multi-master. Is master at 192.168.11.2 responding?
2019-11-21 06:19:40,346 [salt.utils.decorators:613 ][WARNING ][2097] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-11-21 06:19:55,974 [salt.loaded.int.states.file:2298][WARNING ][2097] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-11-21 06:20:05,674 [salt.utils.decorators:613 ][WARNING ][2097] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-11-21 06:20:07,398 [salt.utils.decorators:613 ][WARNING ][2097] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-11-21 06:20:07,501 [salt.loaded.int.states.file:2298][WARNING ][2097] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-11-21 06:20:07,504 [salt.loaded.int.states.file:2298][WARNING ][2097] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-11-21 06:20:07,505 [salt.loaded.int.states.file:2298][WARNING ][2097] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-11-21 06:20:07,507 [salt.loaded.int.states.file:2298][WARNING ][2097] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-11-21 06:20:07,508 [salt.loaded.int.states.file:2298][WARNING ][2097] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-11-21 06:20:07,510 [salt.loaded.int.states.file:2298][WARNING ][2097] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-11-21 06:20:07,511 [salt.loaded.int.states.file:2298][WARNING ][2097] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-11-21 06:20:07,512 [salt.loaded.int.states.file:2298][WARNING ][2097] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-11-21 06:20:12,738 [salt.loaded.int.module.debian_ip:1964][WARNING ][2097] The network state sls is requiring a reboot of the system to properly apply network configuration.
2019-11-21 06:20:13,943 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][2097] Command '['umount', '/dev/shm']' failed with return code: 32
2019-11-21 06:20:13,943 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][2097] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2019-11-21 06:20:13,944 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][2097] retcode: 32
2019-11-21 06:20:25,502 [salt.utils.parsers:1051][WARNING ][1889] Minion received a SIGTERM. Exiting.
2019-11-21 06:21:57,121 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,207 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,209 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,212 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,215 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,455 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,458 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,461 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,508 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,511 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,514 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,517 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,640 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,666 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,669 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,672 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,676 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,679 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,683 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,686 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,690 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,693 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,696 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,700 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,703 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,707 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,710 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,714 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,717 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,720 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,724 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,727 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,731 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,735 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,738 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,741 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,745 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,748 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,752 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,755 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,759 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,762 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,765 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,769 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,772 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,776 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,779 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,783 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,786 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,789 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,793 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,796 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,800 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,803 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,807 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,810 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:21:57,814 [salt.utils.decorators:82  ][ERROR   ][3882] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-11-21 06:22:48,726 [salt.utils.decorators:613 ][WARNING ][3882] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-11-21 06:23:17,516 [keyring.backend  :154 ][INFO    ][11220] Loading Windows (alt)
2019-11-21 06:23:17,519 [keyring.backend  :154 ][INFO    ][11220] Loading pyfs
2019-11-21 06:23:17,520 [keyring.backend  :154 ][INFO    ][11220] Loading multi
2019-11-21 06:23:17,521 [keyring.backend  :154 ][INFO    ][11220] Loading Google
2019-11-21 06:23:17,522 [keyring.backend  :154 ][INFO    ][11220] Loading Gnome
2019-11-21 06:23:17,527 [keyring.backend  :154 ][INFO    ][11220] Loading keyczar
2019-11-21 06:23:17,527 [keyring.backend  :154 ][INFO    ][11220] Loading file
2019-11-21 06:23:17,528 [keyring.backend  :154 ][INFO    ][11220] Loading kwallet
2019-11-21 06:23:17,995 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11220] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2019-11-21 06:23:18,022 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11220] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2019-11-21 06:23:18,039 [salt.utils.parsers:1051][WARNING ][2322] Minion received a SIGTERM. Exiting.
2019-11-21 06:23:19,695 [salt.cli.daemons :293 ][INFO    ][11276] Setting up the Salt Minion "ctl01.mcp-ovn-noha.local"
2019-11-21 06:23:19,886 [salt.cli.daemons :82  ][INFO    ][11276] Starting up the Salt Minion
2019-11-21 06:23:19,886 [salt.utils.event :1017][INFO    ][11276] Starting pull socket on /var/run/salt/minion/minion_event_e44f6182c0_pull.ipc
2019-11-21 06:23:20,668 [salt.minion      :976 ][INFO    ][11276] Creating minion process manager
2019-11-21 06:23:22,802 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11276] Executing command ['date', '+%z'] in directory '/root'
2019-11-21 06:23:22,822 [salt.utils.schedule:568 ][INFO    ][11276] Updating job settings for scheduled job: __mine_interval
2019-11-21 06:23:22,824 [salt.minion      :1108][INFO    ][11276] Added mine.update to scheduler
2019-11-21 06:23:22,830 [salt.minion      :1975][INFO    ][11276] Minion is starting as user 'root'
2019-11-21 06:23:22,843 [salt.minion      :2336][INFO    ][11276] Minion is ready to receive requests!
2019-11-21 06:23:32,490 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121062332482176
2019-11-21 06:23:32,509 [salt.minion      :1432][INFO    ][11365] Starting a new job with PID 11365
2019-11-21 06:23:39,098 [salt.state       :915 ][INFO    ][11365] Loading fresh modules for state activity
2019-11-21 06:23:39,159 [salt.fileclient  :1219][INFO    ][11365] Fetching file from saltenv 'base', ** done ** 'rabbitmq/init.sls'
2019-11-21 06:23:39,206 [salt.fileclient  :1219][INFO    ][11365] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/init.sls'
2019-11-21 06:23:39,235 [salt.fileclient  :1219][INFO    ][11365] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/service.sls'
2019-11-21 06:23:39,287 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command 'cat /var/lib/rabbitmq/.erlang.cookie' in directory '/root'
2019-11-21 06:23:39,305 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][11365] Command 'cat /var/lib/rabbitmq/.erlang.cookie' failed with return code: 1
2019-11-21 06:23:39,305 [salt.loaded.int.module.cmdmod:732 ][ERROR   ][11365] stdout: cat: /var/lib/rabbitmq/.erlang.cookie: No such file or directory
2019-11-21 06:23:39,306 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][11365] retcode: 1
2019-11-21 06:23:39,349 [salt.fileclient  :1219][INFO    ][11365] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/ssl.sls'
2019-11-21 06:23:39,414 [salt.fileclient  :1219][INFO    ][11365] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/plugin.sls'
2019-11-21 06:23:39,471 [salt.fileclient  :1219][INFO    ][11365] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/vhost.sls'
2019-11-21 06:23:39,551 [salt.fileclient  :1219][INFO    ][11365] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/user.sls'
2019-11-21 06:23:39,969 [keyring.backend  :154 ][INFO    ][11365] Loading Windows (alt)
2019-11-21 06:23:39,972 [keyring.backend  :154 ][INFO    ][11365] Loading pyfs
2019-11-21 06:23:39,973 [keyring.backend  :154 ][INFO    ][11365] Loading multi
2019-11-21 06:23:39,973 [keyring.backend  :154 ][INFO    ][11365] Loading Google
2019-11-21 06:23:39,974 [keyring.backend  :154 ][INFO    ][11365] Loading Gnome
2019-11-21 06:23:39,978 [keyring.backend  :154 ][INFO    ][11365] Loading keyczar
2019-11-21 06:23:39,978 [keyring.backend  :154 ][INFO    ][11365] Loading file
2019-11-21 06:23:39,978 [keyring.backend  :154 ][INFO    ][11365] Loading kwallet
2019-11-21 06:23:40,688 [salt.state       :1780][INFO    ][11365] Running state [rabbitmq-server] at time 06:23:40.688007
2019-11-21 06:23:40,688 [salt.state       :1813][INFO    ][11365] Executing state pkg.installed for [rabbitmq-server]
2019-11-21 06:23:40,689 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:23:41,071 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['apt-cache', '-q', 'policy', 'rabbitmq-server'] in directory '/root'
2019-11-21 06:23:41,157 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:23:43,244 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:23:43,276 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'rabbitmq-server'] in directory '/root'
2019-11-21 06:23:47,601 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062347583833
2019-11-21 06:23:47,622 [salt.minion      :1432][INFO    ][11759] Starting a new job with PID 11759
2019-11-21 06:23:47,640 [salt.minion      :1711][INFO    ][11759] Returning information for job: 20191121062347583833
2019-11-21 06:24:17,813 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062417804895
2019-11-21 06:24:17,825 [salt.minion      :1432][INFO    ][12584] Starting a new job with PID 12584
2019-11-21 06:24:17,847 [salt.minion      :1711][INFO    ][12584] Returning information for job: 20191121062417804895
2019-11-21 06:24:36,374 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:24:36,422 [salt.state       :300 ][INFO    ][11365] Made the following changes:
'libltdl7' changed from 'absent' to '2.4.6-0.1'
'erlang-runtime-tools' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-eunit' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-asn1' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-inets' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-snmp' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-odbc' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-diameter' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-parsetools' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-public-key' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'socat' changed from 'absent' to '1.7.3.1-1'
'erlang-abi-17.0' changed from 'absent' to '1'
'erlang-ftp' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-nox' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-os-mon' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'libodbc1' changed from 'absent' to '2.3.1-4.1'
'erlang-eldap' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-syntax-tools' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-edoc' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-ssl' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-tools' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-mnesia' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-ssh' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'libsctp1' changed from 'absent' to '1.0.16+dfsg-3'
'rabbitmq-server' changed from 'absent' to '3.7.9-2~u16.04+mcp'
'erlang-base-hipe' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-crypto' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-xmerl' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-erl-docgen' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'
'erlang-abi-15.b' changed from 'absent' to '1'
'erlang-tftp' changed from 'absent' to '1:21.2+dfsg-2~u16.04+mcp'

2019-11-21 06:24:36,446 [salt.state       :915 ][INFO    ][11365] Loading fresh modules for state activity
2019-11-21 06:24:36,486 [salt.state       :1951][INFO    ][11365] Completed state [rabbitmq-server] at time 06:24:36.486391 duration_in_ms=55798.384
2019-11-21 06:24:36,490 [salt.state       :1780][INFO    ][11365] Running state [/etc/rabbitmq/rabbitmq.config] at time 06:24:36.490861
2019-11-21 06:24:36,491 [salt.state       :1813][INFO    ][11365] Executing state file.managed for [/etc/rabbitmq/rabbitmq.config]
2019-11-21 06:24:36,524 [salt.fileclient  :1219][INFO    ][11365] Fetching file from saltenv 'base', ** done ** 'rabbitmq/files/rabbitmq.config'
2019-11-21 06:24:36,587 [salt.state       :300 ][INFO    ][11365] File changed:
New file
2019-11-21 06:24:36,588 [salt.state       :1951][INFO    ][11365] Completed state [/etc/rabbitmq/rabbitmq.config] at time 06:24:36.588091 duration_in_ms=97.229
2019-11-21 06:24:36,588 [salt.state       :1780][INFO    ][11365] Running state [/etc/default/rabbitmq-server] at time 06:24:36.588551
2019-11-21 06:24:36,588 [salt.state       :1813][INFO    ][11365] Executing state file.managed for [/etc/default/rabbitmq-server]
2019-11-21 06:24:36,612 [salt.fileclient  :1219][INFO    ][11365] Fetching file from saltenv 'base', ** done ** 'rabbitmq/files/default'
2019-11-21 06:24:36,648 [salt.state       :300 ][INFO    ][11365] File changed:
--- 
+++ 
@@ -1,3 +1,6 @@
+
+# Managed by Salt
+
 # This file is sourced by /etc/init.d/rabbitmq-server. Its primary
 # reason for existing is to allow adjustment of system limits for the
 # rabbitmq-server process.
@@ -6,12 +9,5 @@
 # to handle many simultaneous connections. Refer to the system
 # documentation for ulimit (in man bash) for more information.
 #
-#ulimit -n 1024
-# Default value is 1024, but it's absolutely unreasonable default in a
-# modern world, as rabbitmq consumes file descriptors for everything:
-# for client connections, for per-queue files, etc. Its documentation
-# recommends to allow for at least 65536 open file descriptors in
-# production. Values were chosen in
-# https://bugs.launchpad.net/fuel/+bug/1279594
-ulimit -H -n 105472 || true
-ulimit -S -n 102400 || true
+
+ulimit -n 8192
2019-11-21 06:24:36,650 [salt.state       :1951][INFO    ][11365] Completed state [/etc/default/rabbitmq-server] at time 06:24:36.650089 duration_in_ms=61.538
2019-11-21 06:24:36,650 [salt.state       :1780][INFO    ][11365] Running state [/etc/systemd/system/rabbitmq-server.service.d/limits.conf] at time 06:24:36.650522
2019-11-21 06:24:36,650 [salt.state       :1813][INFO    ][11365] Executing state file.managed for [/etc/systemd/system/rabbitmq-server.service.d/limits.conf]
2019-11-21 06:24:36,674 [salt.fileclient  :1219][INFO    ][11365] Fetching file from saltenv 'base', ** done ** 'rabbitmq/files/limits.conf'
2019-11-21 06:24:36,706 [salt.state       :300 ][INFO    ][11365] File changed:
New file
2019-11-21 06:24:36,707 [salt.state       :1951][INFO    ][11365] Completed state [/etc/systemd/system/rabbitmq-server.service.d/limits.conf] at time 06:24:36.707041 duration_in_ms=56.519
2019-11-21 06:24:36,708 [salt.state       :1780][INFO    ][11365] Running state [sleep 30] at time 06:24:36.708387
2019-11-21 06:24:36,708 [salt.state       :1813][INFO    ][11365] Executing state cmd.run for [sleep 30]
2019-11-21 06:24:36,709 [py.warnings      :2526][WARNING ][11365] /usr/lib/python2.7/dist-packages/salt/states/cmd.py:824: DeprecationWarning: The legacy user/group arguments are deprecated. Replace them with runas. These arguments will be removed in Salt Oxygen.

2019-11-21 06:24:36,712 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command 'sleep 30' as user 'root' in directory '/root'
2019-11-21 06:24:47,847 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062447829991
2019-11-21 06:24:47,871 [salt.minion      :1432][INFO    ][12747] Starting a new job with PID 12747
2019-11-21 06:24:47,890 [salt.minion      :1711][INFO    ][12747] Returning information for job: 20191121062447829991
2019-11-21 06:25:06,798 [salt.state       :300 ][INFO    ][11365] {'pid': 12720, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:25:06,799 [salt.state       :1951][INFO    ][11365] Completed state [sleep 30] at time 06:25:06.799735 duration_in_ms=30091.346
2019-11-21 06:25:06,801 [salt.state       :1780][INFO    ][11365] Running state [service rabbitmq-server stop] at time 06:25:06.801252
2019-11-21 06:25:06,801 [salt.state       :1813][INFO    ][11365] Executing state cmd.run for [service rabbitmq-server stop]
2019-11-21 06:25:06,802 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command 'service rabbitmq-server stop' in directory '/root'
2019-11-21 06:25:07,056 [salt.state       :300 ][INFO    ][11365] {'pid': 12829, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:25:07,057 [salt.state       :1951][INFO    ][11365] Completed state [service rabbitmq-server stop] at time 06:25:07.056965 duration_in_ms=255.713
2019-11-21 06:25:07,057 [salt.state       :1780][INFO    ][11365] Running state [/var/lib/rabbitmq] at time 06:25:07.057526
2019-11-21 06:25:07,058 [salt.state       :1813][INFO    ][11365] Executing state file.directory for [/var/lib/rabbitmq]
2019-11-21 06:25:07,059 [salt.state       :300 ][INFO    ][11365] Directory /var/lib/rabbitmq is in the correct state
Directory /var/lib/rabbitmq updated
2019-11-21 06:25:07,059 [salt.state       :1951][INFO    ][11365] Completed state [/var/lib/rabbitmq] at time 06:25:07.059864 duration_in_ms=2.338
2019-11-21 06:25:07,061 [salt.state       :1780][INFO    ][11365] Running state [/var/lib/rabbitmq/.erlang.cookie] at time 06:25:07.061548
2019-11-21 06:25:07,062 [salt.state       :1813][INFO    ][11365] Executing state file.managed for [/var/lib/rabbitmq/.erlang.cookie]
2019-11-21 06:25:07,218 [salt.state       :300 ][INFO    ][11365] File changed:
New file
2019-11-21 06:25:07,219 [salt.state       :1951][INFO    ][11365] Completed state [/var/lib/rabbitmq/.erlang.cookie] at time 06:25:07.219063 duration_in_ms=157.515
2019-11-21 06:25:07,220 [salt.state       :1780][INFO    ][11365] Running state [sleep 30] at time 06:25:07.220641
2019-11-21 06:25:07,221 [salt.state       :1813][INFO    ][11365] Executing state cmd.run for [sleep 30]
2019-11-21 06:25:07,224 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command 'sleep 30' as user 'root' in directory '/root'
2019-11-21 06:25:17,904 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062517890847
2019-11-21 06:25:17,917 [salt.minion      :1432][INFO    ][12911] Starting a new job with PID 12911
2019-11-21 06:25:17,933 [salt.minion      :1711][INFO    ][12911] Returning information for job: 20191121062517890847
2019-11-21 06:25:37,316 [salt.state       :300 ][INFO    ][11365] {'pid': 12890, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:25:37,317 [salt.state       :1951][INFO    ][11365] Completed state [sleep 30] at time 06:25:37.317234 duration_in_ms=30096.592
2019-11-21 06:25:37,869 [salt.state       :1780][INFO    ][11365] Running state [rabbitmq-server] at time 06:25:37.869758
2019-11-21 06:25:37,870 [salt.state       :1813][INFO    ][11365] Executing state service.running for [rabbitmq-server]
2019-11-21 06:25:37,870 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['systemctl', 'status', 'rabbitmq-server.service', '-n', '0'] in directory '/root'
2019-11-21 06:25:37,897 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['systemctl', 'is-active', 'rabbitmq-server.service'] in directory '/root'
2019-11-21 06:25:37,916 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['systemctl', 'is-enabled', 'rabbitmq-server.service'] in directory '/root'
2019-11-21 06:25:37,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'rabbitmq-server.service'] in directory '/root'
2019-11-21 06:25:41,157 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['systemctl', 'is-active', 'rabbitmq-server.service'] in directory '/root'
2019-11-21 06:25:41,174 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['systemctl', 'is-enabled', 'rabbitmq-server.service'] in directory '/root'
2019-11-21 06:25:41,194 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['systemctl', 'is-enabled', 'rabbitmq-server.service'] in directory '/root'
2019-11-21 06:25:41,219 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'rabbitmq-server.service'] in directory '/root'
2019-11-21 06:25:41,656 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['systemctl', 'is-enabled', 'rabbitmq-server.service'] in directory '/root'
2019-11-21 06:25:41,674 [salt.state       :300 ][INFO    ][11365] {'rabbitmq-server': True}
2019-11-21 06:25:41,675 [salt.state       :1951][INFO    ][11365] Completed state [rabbitmq-server] at time 06:25:41.675215 duration_in_ms=3805.456
2019-11-21 06:25:41,679 [salt.state       :1780][INFO    ][11365] Running state [amqp_client] at time 06:25:41.679378
2019-11-21 06:25:41,679 [salt.state       :1813][INFO    ][11365] Executing state rabbitmq_plugin.enabled for [amqp_client]
2019-11-21 06:25:41,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmq-plugins', 'list', '-m', '-e'] as user 'root' in directory '/root'
2019-11-21 06:25:42,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmq-plugins', 'enable', 'amqp_client'] as user 'root' in directory '/root'
2019-11-21 06:25:44,197 [salt.state       :300 ][INFO    ][11365] {'new': 'amqp_client', 'old': ''}
2019-11-21 06:25:44,198 [salt.state       :1951][INFO    ][11365] Completed state [amqp_client] at time 06:25:44.197932 duration_in_ms=2518.553
2019-11-21 06:25:44,198 [salt.state       :1780][INFO    ][11365] Running state [rabbitmq_management] at time 06:25:44.198839
2019-11-21 06:25:44,199 [salt.state       :1813][INFO    ][11365] Executing state rabbitmq_plugin.enabled for [rabbitmq_management]
2019-11-21 06:25:44,200 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmq-plugins', 'list', '-m', '-e'] as user 'root' in directory '/root'
2019-11-21 06:25:45,244 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmq-plugins', 'enable', 'rabbitmq_management'] as user 'root' in directory '/root'
2019-11-21 06:25:47,108 [salt.state       :300 ][INFO    ][11365] {'new': 'rabbitmq_management', 'old': ''}
2019-11-21 06:25:47,109 [salt.state       :1951][INFO    ][11365] Completed state [rabbitmq_management] at time 06:25:47.109650 duration_in_ms=2910.811
2019-11-21 06:25:47,112 [salt.state       :1780][INFO    ][11365] Running state [/openstack] at time 06:25:47.112736
2019-11-21 06:25:47,113 [salt.state       :1813][INFO    ][11365] Executing state rabbitmq_vhost.present for [/openstack]
2019-11-21 06:25:47,114 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'list_vhosts', '-q'] as user 'root' in directory '/root'
2019-11-21 06:25:47,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'add_vhost', '/openstack'] as user 'root' in directory '/root'
2019-11-21 06:25:47,945 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062547931315
2019-11-21 06:25:47,959 [salt.minion      :1432][INFO    ][14258] Starting a new job with PID 14258
2019-11-21 06:25:47,979 [salt.minion      :1711][INFO    ][14258] Returning information for job: 20191121062547931315
2019-11-21 06:25:48,439 [salt.state       :300 ][INFO    ][11365] {'new': '/openstack', 'old': ''}
2019-11-21 06:25:48,440 [salt.state       :1951][INFO    ][11365] Completed state [/openstack] at time 06:25:48.439984 duration_in_ms=1327.247
2019-11-21 06:25:48,443 [salt.state       :1780][INFO    ][11365] Running state [openstack] at time 06:25:48.443750
2019-11-21 06:25:48,444 [salt.state       :1813][INFO    ][11365] Executing state rabbitmq_user.present for [openstack]
2019-11-21 06:25:48,445 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'list_users', '-q'] as user 'root' in directory '/root'
2019-11-21 06:25:49,777 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'list_user_permissions', 'openstack', '-q'] as user 'root' in directory '/root'
2019-11-21 06:25:50,468 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'set_permissions', '-p', '/openstack', 'openstack', '.*', '.*', '.*'] as user 'root' in directory '/root'
2019-11-21 06:25:51,304 [salt.state       :300 ][INFO    ][11365] Made the following changes:
'perms' changed from 'absent' to '{'/openstack': ['.*', '.*', '.*']}'
'user' changed from 'absent' to 'openstack'

2019-11-21 06:25:51,305 [salt.state       :1951][INFO    ][11365] Completed state [openstack] at time 06:25:51.305505 duration_in_ms=2861.756
2019-11-21 06:25:51,309 [salt.state       :1780][INFO    ][11365] Running state [Ceilometer] at time 06:25:51.309899
2019-11-21 06:25:51,311 [salt.state       :1813][INFO    ][11365] Executing state rabbitmq_policy.present for [Ceilometer]
2019-11-21 06:25:51,312 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'list_policies', '-q', '-p', '/openstack'] as user 'root' in directory '/root'
2019-11-21 06:25:52,109 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'set_policy', '-p', '/openstack', '--priority', 10, 'Ceilometer', '^metering.sample$', '{"ha-mode": "all", "message-ttl": 10800000}'] as user 'root' in directory '/root'
2019-11-21 06:25:52,883 [salt.state       :300 ][INFO    ][11365] {'new': 'Ceilometer', 'old': {}}
2019-11-21 06:25:52,883 [salt.state       :1951][INFO    ][11365] Completed state [Ceilometer] at time 06:25:52.883781 duration_in_ms=1573.883
2019-11-21 06:25:52,884 [salt.state       :1780][INFO    ][11365] Running state [default-policy] at time 06:25:52.884692
2019-11-21 06:25:52,885 [salt.state       :1813][INFO    ][11365] Executing state rabbitmq_policy.present for [default-policy]
2019-11-21 06:25:52,886 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'list_policies', '-q', '-p', '/openstack'] as user 'root' in directory '/root'
2019-11-21 06:25:53,594 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'set_policy', '-p', '/openstack', 'default-policy', '^(?!amq\\.).*', '{"message-ttl": 120000}'] as user 'root' in directory '/root'
2019-11-21 06:25:54,303 [salt.state       :300 ][INFO    ][11365] {'new': 'default-policy', 'old': {}}
2019-11-21 06:25:54,304 [salt.state       :1951][INFO    ][11365] Completed state [default-policy] at time 06:25:54.303937 duration_in_ms=1419.245
2019-11-21 06:25:54,304 [salt.state       :1780][INFO    ][11365] Running state [guest] at time 06:25:54.304320
2019-11-21 06:25:54,304 [salt.state       :1813][INFO    ][11365] Executing state rabbitmq_user.present for [guest]
2019-11-21 06:25:54,305 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'list_users', '-q'] as user 'root' in directory '/root'
2019-11-21 06:25:55,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'status'] as user 'root' in directory '/root'
2019-11-21 06:25:57,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'list_user_permissions', 'guest', '-q'] as user 'root' in directory '/root'
2019-11-21 06:25:57,813 [salt.state       :300 ][INFO    ][11365] Made the following changes:
'password' changed from 'absent' to 'Set password.'

2019-11-21 06:25:57,814 [salt.state       :1951][INFO    ][11365] Completed state [guest] at time 06:25:57.814046 duration_in_ms=3509.725
2019-11-21 06:25:57,814 [salt.state       :1780][INFO    ][11365] Running state [HA] at time 06:25:57.814680
2019-11-21 06:25:57,815 [salt.state       :1813][INFO    ][11365] Executing state rabbitmq_policy.present for [HA]
2019-11-21 06:25:57,815 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'list_policies', '-q', '-p', '/'] as user 'root' in directory '/root'
2019-11-21 06:25:58,586 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'set_policy', '-p', '/', 'HA', '^(?!amq\\.).*', '{"ha-mode": "all", "message-ttl": 120000}'] as user 'root' in directory '/root'
2019-11-21 06:25:59,373 [salt.state       :300 ][INFO    ][11365] {'new': 'HA', 'old': {}}
2019-11-21 06:25:59,373 [salt.state       :1951][INFO    ][11365] Completed state [HA] at time 06:25:59.373587 duration_in_ms=1558.906
2019-11-21 06:25:59,374 [salt.state       :1780][INFO    ][11365] Running state [admin] at time 06:25:59.374561
2019-11-21 06:25:59,375 [salt.state       :1813][INFO    ][11365] Executing state rabbitmq_user.present for [admin]
2019-11-21 06:25:59,376 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'list_users', '-q'] as user 'root' in directory '/root'
2019-11-21 06:26:00,823 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'list_users', '-q'] as user 'root' in directory '/root'
2019-11-21 06:26:01,561 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'set_user_tags', 'admin', 'administrator'] as user 'root' in directory '/root'
2019-11-21 06:26:02,144 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'list_user_permissions', 'admin', '-q'] as user 'root' in directory '/root'
2019-11-21 06:26:02,983 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'set_permissions', '-p', '/openstack', 'admin', '.*', '.*', '.*'] as user 'root' in directory '/root'
2019-11-21 06:26:03,753 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11365] Executing command ['/usr/sbin/rabbitmqctl', 'set_permissions', '-p', '/', 'admin', '.*', '.*', '.*'] as user 'root' in directory '/root'
2019-11-21 06:26:04,503 [salt.state       :300 ][INFO    ][11365] Made the following changes:
'perms' changed from 'absent' to '{'/openstack': ['.*', '.*', '.*'], '/': ['.*', '.*', '.*']}'
'user' changed from 'absent' to 'admin'
'tags' changed from '['']' to '['administrator']'

2019-11-21 06:26:04,504 [salt.state       :1951][INFO    ][11365] Completed state [admin] at time 06:26:04.504205 duration_in_ms=5129.643
2019-11-21 06:26:04,510 [salt.minion      :1711][INFO    ][11365] Returning information for job: 20191121062332482176
2019-11-21 06:26:05,287 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command cmd.run with jid 20191121062605272194
2019-11-21 06:26:05,307 [salt.minion      :1432][INFO    ][18071] Starting a new job with PID 18071
2019-11-21 06:26:05,317 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][18071] Executing command 'rabbitmqctl status' in directory '/root'
2019-11-21 06:26:05,857 [salt.minion      :1711][INFO    ][18071] Returning information for job: 20191121062605272194
2019-11-21 06:26:06,501 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121062606487918
2019-11-21 06:26:06,524 [salt.minion      :1432][INFO    ][18196] Starting a new job with PID 18196
2019-11-21 06:26:13,431 [salt.state       :915 ][INFO    ][18196] Loading fresh modules for state activity
2019-11-21 06:26:13,590 [salt.fileclient  :1219][INFO    ][18196] Fetching file from saltenv 'base', ** done ** 'mysql/init.sls'
2019-11-21 06:26:13,637 [salt.fileclient  :1219][INFO    ][18196] Fetching file from saltenv 'base', ** done ** 'mysql/server/init.sls'
2019-11-21 06:26:13,665 [salt.fileclient  :1219][INFO    ][18196] Fetching file from saltenv 'base', ** done ** 'mysql/server/service.sls'
2019-11-21 06:26:13,752 [salt.fileclient  :1219][INFO    ][18196] Fetching file from saltenv 'base', ** done ** 'mysql/common.sls'
2019-11-21 06:26:13,826 [salt.fileclient  :1219][INFO    ][18196] Fetching file from saltenv 'base', ** done ** 'mysql/server/database.sls'
2019-11-21 06:26:14,299 [keyring.backend  :154 ][INFO    ][18196] Loading Windows (alt)
2019-11-21 06:26:14,302 [keyring.backend  :154 ][INFO    ][18196] Loading pyfs
2019-11-21 06:26:14,303 [keyring.backend  :154 ][INFO    ][18196] Loading multi
2019-11-21 06:26:14,304 [keyring.backend  :154 ][INFO    ][18196] Loading Google
2019-11-21 06:26:14,305 [keyring.backend  :154 ][INFO    ][18196] Loading Gnome
2019-11-21 06:26:14,309 [keyring.backend  :154 ][INFO    ][18196] Loading keyczar
2019-11-21 06:26:14,309 [keyring.backend  :154 ][INFO    ][18196] Loading file
2019-11-21 06:26:14,310 [keyring.backend  :154 ][INFO    ][18196] Loading kwallet
2019-11-21 06:26:15,014 [salt.state       :1780][INFO    ][18196] Running state [mysql-server-5.7] at time 06:26:15.013995
2019-11-21 06:26:15,014 [salt.state       :1813][INFO    ][18196] Executing state pkg.installed for [mysql-server-5.7]
2019-11-21 06:26:15,015 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:26:15,473 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['apt-cache', '-q', 'policy', 'mysql-server-5.7'] in directory '/root'
2019-11-21 06:26:15,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:26:17,828 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:26:17,856 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'mysql-server-5.7'] in directory '/root'
2019-11-21 06:26:21,549 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062621533732
2019-11-21 06:26:21,570 [salt.minion      :1432][INFO    ][18585] Starting a new job with PID 18585
2019-11-21 06:26:21,588 [salt.minion      :1711][INFO    ][18585] Returning information for job: 20191121062621533732
2019-11-21 06:26:42,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:26:42,260 [salt.state       :300 ][INFO    ][18196] Made the following changes:
'libhtml-parser-perl' changed from 'absent' to '3.72-1'
'virtual-mysql-client' changed from 'absent' to '1'
'libencode-locale-perl' changed from 'absent' to '1.05-1'
'mysql-common-5.6' changed from 'absent' to '1'
'libhttp-message-perl' changed from 'absent' to '6.11-1'
'liburi-perl' changed from 'absent' to '1.71-1'
'mysql-client-core-5.7' changed from 'absent' to '5.7.28-0ubuntu0.16.04.2'
'mysql-client-5.7' changed from 'absent' to '5.7.28-0ubuntu0.16.04.2'
'timedate' changed from 'absent' to '1'
'mysql-server-5.7' changed from 'absent' to '5.7.28-0ubuntu0.16.04.2'
'libfcgi-perl' changed from 'absent' to '0.77-1build1'
'mysql-common' changed from 'absent' to '5.7.28-0ubuntu0.16.04.2'
'libcgi-fast-perl' changed from 'absent' to '1:2.10-1'
'mysql-server-core-5.7' changed from 'absent' to '5.7.28-0ubuntu0.16.04.2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libcgi-pm-perl' changed from 'absent' to '4.26-1'
'liblwp-mediatypes-perl' changed from 'absent' to '6.02-1'
'virtual-mysql-server' changed from 'absent' to '1'
'libevent-core-2.0-5' changed from 'absent' to '2.0.21-stable-2ubuntu0.16.04.1'
'virtual-mysql-client-core' changed from 'absent' to '1'
'libhtml-template-perl' changed from 'absent' to '2.95-2'
'libhttp-date-perl' changed from 'absent' to '6.02-1'
'libtimedate-perl' changed from 'absent' to '2.3000-2'
'virtual-mysql-server-core' changed from 'absent' to '1'
'libhtml-tagset-perl' changed from 'absent' to '3.20-2'
'libio-html-perl' changed from 'absent' to '1.001-1'

2019-11-21 06:26:42,284 [salt.state       :915 ][INFO    ][18196] Loading fresh modules for state activity
2019-11-21 06:26:42,323 [salt.state       :1951][INFO    ][18196] Completed state [mysql-server-5.7] at time 06:26:42.323685 duration_in_ms=27309.691
2019-11-21 06:26:42,329 [salt.state       :1780][INFO    ][18196] Running state [python-mysqldb] at time 06:26:42.329199
2019-11-21 06:26:42,329 [salt.state       :1813][INFO    ][18196] Executing state pkg.installed for [python-mysqldb]
2019-11-21 06:26:43,050 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:26:43,083 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-mysqldb'] in directory '/root'
2019-11-21 06:26:45,848 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:26:45,897 [salt.state       :300 ][INFO    ][18196] Made the following changes:
'python2.7-mysqldb' changed from 'absent' to '1'
'libmysqlclient20' changed from 'absent' to '5.7.28-0ubuntu0.16.04.2'
'python-mysqldb' changed from 'absent' to '1.3.7-1build2'

2019-11-21 06:26:45,919 [salt.state       :915 ][INFO    ][18196] Loading fresh modules for state activity
2019-11-21 06:26:45,960 [salt.state       :1951][INFO    ][18196] Completed state [python-mysqldb] at time 06:26:45.960518 duration_in_ms=3631.317
2019-11-21 06:26:45,966 [salt.state       :1780][INFO    ][18196] Running state [debconf-utils] at time 06:26:45.966397
2019-11-21 06:26:45,966 [salt.state       :1813][INFO    ][18196] Executing state pkg.installed for [debconf-utils]
2019-11-21 06:26:46,782 [salt.state       :300 ][INFO    ][18196] All specified packages are already installed
2019-11-21 06:26:46,783 [salt.state       :1951][INFO    ][18196] Completed state [debconf-utils] at time 06:26:46.783001 duration_in_ms=816.603
2019-11-21 06:26:46,784 [salt.state       :1780][INFO    ][18196] Running state [mariadb-server] at time 06:26:46.784430
2019-11-21 06:26:46,784 [salt.state       :1813][INFO    ][18196] Executing state debconf.set for [mariadb-server]
2019-11-21 06:26:46,785 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command 'debconf-get-selections' in directory '/root'
2019-11-21 06:26:47,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command 'debconf-set-selections /tmp/salt-yBK_nP' in directory '/root'
2019-11-21 06:26:47,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command 'debconf-set-selections /tmp/salt-GahPg5' in directory '/root'
2019-11-21 06:26:47,592 [salt.state       :300 ][INFO    ][18196] {'mysql-server/root_password': 'opnfv_secret', 'mysql-server/root_password_again': 'opnfv_secret'}
2019-11-21 06:26:47,594 [salt.state       :1951][INFO    ][18196] Completed state [mariadb-server] at time 06:26:47.594486 duration_in_ms=810.054
2019-11-21 06:26:47,603 [salt.state       :1780][INFO    ][18196] Running state [/etc/mysql/my.cnf] at time 06:26:47.603725
2019-11-21 06:26:47,604 [salt.state       :1813][INFO    ][18196] Executing state file.managed for [/etc/mysql/my.cnf]
2019-11-21 06:26:47,648 [salt.fileclient  :1219][INFO    ][18196] Fetching file from saltenv 'base', ** done ** 'mysql/conf/my.cnf.Debian'
2019-11-21 06:26:47,715 [salt.state       :300 ][INFO    ][18196] File changed:
--- 
+++ 
@@ -1,10 +1,11 @@
+
 #
 # The MySQL database server configuration file.
 #
 # You can copy this to one of:
 # - "/etc/mysql/my.cnf" to set global options,
 # - "~/.my.cnf" to set user-specific options.
-# 
+#
 # One can use all long options that the program supports.
 # Run program with --help to get a list of available options and with
 # --print-defaults to see which it would actually understand and use.
@@ -12,10 +13,111 @@
 # For explanations see
 # http://dev.mysql.com/doc/mysql/en/server-system-variables.html
 
+# This will be passed to all mysql clients
+# It has been reported that passwords should be enclosed with ticks/quotes
+# escpecially if they contain "#" chars...
+# Remember to edit /etc/mysql/debian.cnf when changing the socket location.
+
+[client]
+port           = 3306
+socket         = /var/run/mysqld/mysqld.sock
+default-character-set=utf8
+
+# Here is entries for some specific programs
+# The following values assume you have at least 32M ram
+
+# This was formally known as [safe_mysqld]. Both versions are currently parsed.
+[mysqld_safe]
+socket         = /var/run/mysqld/mysqld.sock
+nice           = 0
+
+[mysqld]
+#
+# * Basic Settings
+#
+user           = mysql
+pid-file       = /var/run/mysqld/mysqld.pid
+socket         = /var/run/mysqld/mysqld.sock
+port           = 3306
+basedir        = /usr
+datadir        = /var/lib/mysql
+tmpdir         = /tmp
+lc-messages-dir = /usr/share/mysql
+skip-external-locking
+
+#
+# Instead of skip-networking the default is now to listen only on
+# localhost which is more compatible and is not less secure.
+bind-address            = 172.16.10.36
+character-set-server=utf8
+
+#
+# * Fine Tuning
+#
+key_buffer_size        = 8M
+max_allowed_packet     = 128M
+thread_stack           = 512K
+thread_cache_size      = 12
+# This replaces the startup script and checks MyISAM tables if needed
+# the first time they are touched
+myisam-recover-options = BACKUP
+max_connections        = 2048
+#table_cache           = 64
+#thread_concurrency    = 10
+#
+# * Query Cache Configuration
+#
+query_cache_limit      = 2M
+query_cache_size       = 0M
+#
+# * Logging and Replication
+#
+# Both location gets rotated by the cronjob.
+# Be aware that this log type is a performance killer.
+# As of 5.1 you can enable the log at runtime!
+#general_log_file       = /var/log/mysql/mysql.log
+#general_log            = 1
+#
+# Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf.
+#
+# Here you can see queries with especially long duration
+slow_query_log = 1
+slow_query_log_file = /var/log/mysql/mysql-slow.log
+long_query_time = 2
+#log-queries-not-using-indexes
+#
+# The following can be used as easy to replay backup logs or for replication.
+# note: if you are setting up a replication slave, see README.Debian about
+#       other settings you may need to change.
+max_binlog_size         = 100M
+#binlog_ignore_db       = include_database_name
+#
+# * InnoDB
+#
+# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
+# Read the manual for more InnoDB related options. There are many!
+#
+# * Security Features
+#
+# Read the manual, too, if you want chroot!
+# chroot = /var/lib/mysql/
+#
+# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
+#
+
+[mysqldump]
+quick
+quote-names
+max_allowed_packet      = 16M
+
+[mysql]
+#no-auto-rehash # faster start of mysql but no tab completition
+
+[isamchk]
+key_buffer_size         = 16M
+
 #
 # * IMPORTANT: Additional settings that can override those from this file!
 #   The files must end with '.cnf', otherwise they'll be ignored.
 #
-
 !includedir /etc/mysql/conf.d/
-!includedir /etc/mysql/mysql.conf.d/

2019-11-21 06:26:47,717 [salt.state       :1951][INFO    ][18196] Completed state [/etc/mysql/my.cnf] at time 06:26:47.717247 duration_in_ms=113.52
2019-11-21 06:26:47,720 [salt.state       :1780][INFO    ][18196] Running state [mysql] at time 06:26:47.720709
2019-11-21 06:26:47,721 [salt.state       :1813][INFO    ][18196] Executing state service.running for [mysql]
2019-11-21 06:26:47,722 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['systemctl', 'status', 'mysql.service', '-n', '0'] in directory '/root'
2019-11-21 06:26:47,749 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['systemctl', 'is-active', 'mysql.service'] in directory '/root'
2019-11-21 06:26:47,770 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['systemctl', 'is-enabled', 'mysql.service'] in directory '/root'
2019-11-21 06:26:47,787 [salt.state       :300 ][INFO    ][18196] The service mysql is already running
2019-11-21 06:26:47,788 [salt.state       :1951][INFO    ][18196] Completed state [mysql] at time 06:26:47.788297 duration_in_ms=67.588
2019-11-21 06:26:47,788 [salt.state       :1780][INFO    ][18196] Running state [mysql] at time 06:26:47.788742
2019-11-21 06:26:47,789 [salt.state       :1813][INFO    ][18196] Executing state service.mod_watch for [mysql]
2019-11-21 06:26:47,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['systemctl', 'is-active', 'mysql.service'] in directory '/root'
2019-11-21 06:26:47,810 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18196] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'mysql.service'] in directory '/root'
2019-11-21 06:26:50,046 [salt.state       :300 ][INFO    ][18196] {'mysql': True}
2019-11-21 06:26:50,046 [salt.state       :1951][INFO    ][18196] Completed state [mysql] at time 06:26:50.046416 duration_in_ms=2257.673
2019-11-21 06:26:50,046 [salt.state       :1780][INFO    ][18196] Running state [/etc/mysql/conf.d] at time 06:26:50.046817
2019-11-21 06:26:50,047 [salt.state       :1813][INFO    ][18196] Executing state file.directory for [/etc/mysql/conf.d]
2019-11-21 06:26:50,049 [salt.state       :300 ][INFO    ][18196] Directory /etc/mysql/conf.d is in the correct state
Directory /etc/mysql/conf.d updated
2019-11-21 06:26:50,049 [salt.state       :1951][INFO    ][18196] Completed state [/etc/mysql/conf.d] at time 06:26:50.049322 duration_in_ms=2.505
2019-11-21 06:26:50,050 [salt.state       :1780][INFO    ][18196] Running state [/root/mysql/scripts] at time 06:26:50.050657
2019-11-21 06:26:50,051 [salt.state       :1813][INFO    ][18196] Executing state file.directory for [/root/mysql/scripts]
2019-11-21 06:26:50,054 [salt.state       :300 ][INFO    ][18196] {'/root/mysql/scripts': 'New Dir'}
2019-11-21 06:26:50,054 [salt.state       :1951][INFO    ][18196] Completed state [/root/mysql/scripts] at time 06:26:50.054510 duration_in_ms=3.853
2019-11-21 06:26:50,055 [salt.state       :1780][INFO    ][18196] Running state [/root/mysql/flags] at time 06:26:50.055211
2019-11-21 06:26:50,055 [salt.state       :1813][INFO    ][18196] Executing state file.directory for [/root/mysql/flags]
2019-11-21 06:26:50,056 [salt.state       :300 ][INFO    ][18196] {'/root/mysql/flags': 'New Dir'}
2019-11-21 06:26:50,057 [salt.state       :1951][INFO    ][18196] Completed state [/root/mysql/flags] at time 06:26:50.056976 duration_in_ms=1.765
2019-11-21 06:26:50,057 [salt.state       :1780][INFO    ][18196] Running state [/root/mysql/data] at time 06:26:50.057701
2019-11-21 06:26:50,057 [salt.state       :1813][INFO    ][18196] Executing state file.directory for [/root/mysql/data]
2019-11-21 06:26:50,059 [salt.state       :300 ][INFO    ][18196] {'/root/mysql/data': 'New Dir'}
2019-11-21 06:26:50,059 [salt.state       :1951][INFO    ][18196] Completed state [/root/mysql/data] at time 06:26:50.059475 duration_in_ms=1.774
2019-11-21 06:26:50,060 [salt.state       :1780][INFO    ][18196] Running state [/root/mysql/flags] at time 06:26:50.060174
2019-11-21 06:26:50,060 [salt.state       :1813][INFO    ][18196] Executing state file.directory for [/root/mysql/flags]
2019-11-21 06:26:50,061 [salt.state       :300 ][INFO    ][18196] Directory /root/mysql/flags is in the correct state
Directory /root/mysql/flags updated
2019-11-21 06:26:50,061 [salt.state       :1951][INFO    ][18196] Completed state [/root/mysql/flags] at time 06:26:50.061457 duration_in_ms=1.282
2019-11-21 06:26:50,063 [salt.state       :1780][INFO    ][18196] Running state [nova_api] at time 06:26:50.063580
2019-11-21 06:26:50,063 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [nova_api]
2019-11-21 06:26:50,068 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'nova_api' created
2019-11-21 06:26:50,068 [salt.state       :300 ][INFO    ][18196] {'nova_api': 'Present'}
2019-11-21 06:26:50,068 [salt.state       :1951][INFO    ][18196] Completed state [nova_api] at time 06:26:50.068873 duration_in_ms=5.293
2019-11-21 06:26:50,069 [salt.state       :1780][INFO    ][18196] Running state [nova] at time 06:26:50.069822
2019-11-21 06:26:50,070 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [nova]
2019-11-21 06:26:50,075 [py.warnings      :354 ][WARNING ][18196] /usr/lib/python2.7/dist-packages/pymysql/cursors.py:165: Warning: (1681, "'PASSWORD' is deprecated and will be removed in a future release.")
  result = self._query(query)

2019-11-21 06:26:50,085 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'nova'@'%' has been created
2019-11-21 06:26:50,086 [salt.state       :300 ][INFO    ][18196] {'nova': 'Present'}
2019-11-21 06:26:50,086 [salt.state       :1951][INFO    ][18196] Completed state [nova] at time 06:26:50.086351 duration_in_ms=16.528
2019-11-21 06:26:50,088 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_nova_nova_api_%] at time 06:26:50.088536
2019-11-21 06:26:50,088 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_nova_nova_api_%]
2019-11-21 06:26:50,104 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'nova_api.*' for user 'nova' has been added
2019-11-21 06:26:50,105 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_nova_nova_api_%': 'Present'}
2019-11-21 06:26:50,105 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_nova_nova_api_%] at time 06:26:50.105306 duration_in_ms=16.77
2019-11-21 06:26:50,105 [salt.state       :1780][INFO    ][18196] Running state [nova] at time 06:26:50.105531
2019-11-21 06:26:50,105 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [nova]
2019-11-21 06:26:50,127 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'nova'@'172.16.10.36' has been created
2019-11-21 06:26:50,128 [salt.state       :300 ][INFO    ][18196] {'nova': 'Present'}
2019-11-21 06:26:50,128 [salt.state       :1951][INFO    ][18196] Completed state [nova] at time 06:26:50.128582 duration_in_ms=23.05
2019-11-21 06:26:50,131 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_nova_nova_api_172.16.10.36] at time 06:26:50.131577
2019-11-21 06:26:50,132 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_nova_nova_api_172.16.10.36]
2019-11-21 06:26:50,151 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'nova_api.*' for user 'nova' has been added
2019-11-21 06:26:50,152 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_nova_nova_api_172.16.10.36': 'Present'}
2019-11-21 06:26:50,152 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_nova_nova_api_172.16.10.36] at time 06:26:50.152553 duration_in_ms=20.977
2019-11-21 06:26:50,152 [salt.state       :1780][INFO    ][18196] Running state [aodh] at time 06:26:50.152830
2019-11-21 06:26:50,153 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [aodh]
2019-11-21 06:26:50,156 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'aodh' created
2019-11-21 06:26:50,156 [salt.state       :300 ][INFO    ][18196] {'aodh': 'Present'}
2019-11-21 06:26:50,157 [salt.state       :1951][INFO    ][18196] Completed state [aodh] at time 06:26:50.157140 duration_in_ms=4.31
2019-11-21 06:26:50,157 [salt.state       :1780][INFO    ][18196] Running state [aodh] at time 06:26:50.157367
2019-11-21 06:26:50,157 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [aodh]
2019-11-21 06:26:50,171 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'aodh'@'%' has been created
2019-11-21 06:26:50,171 [salt.state       :300 ][INFO    ][18196] {'aodh': 'Present'}
2019-11-21 06:26:50,171 [salt.state       :1951][INFO    ][18196] Completed state [aodh] at time 06:26:50.171504 duration_in_ms=14.137
2019-11-21 06:26:50,173 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_aodh_aodh_%] at time 06:26:50.172962
2019-11-21 06:26:50,173 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_aodh_aodh_%]
2019-11-21 06:26:50,183 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'aodh.*' for user 'aodh' has been added
2019-11-21 06:26:50,184 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_aodh_aodh_%': 'Present'}
2019-11-21 06:26:50,184 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_aodh_aodh_%] at time 06:26:50.184317 duration_in_ms=11.355
2019-11-21 06:26:50,184 [salt.state       :1780][INFO    ][18196] Running state [aodh] at time 06:26:50.184555
2019-11-21 06:26:50,184 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [aodh]
2019-11-21 06:26:50,196 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'aodh'@'10.16.0.107' has been created
2019-11-21 06:26:50,197 [salt.state       :300 ][INFO    ][18196] {'aodh': 'Present'}
2019-11-21 06:26:50,197 [salt.state       :1951][INFO    ][18196] Completed state [aodh] at time 06:26:50.197369 duration_in_ms=12.814
2019-11-21 06:26:50,198 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_aodh_aodh_10.16.0.107] at time 06:26:50.198702
2019-11-21 06:26:50,198 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_aodh_aodh_10.16.0.107]
2019-11-21 06:26:50,209 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'aodh.*' for user 'aodh' has been added
2019-11-21 06:26:50,209 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_aodh_aodh_10.16.0.107': 'Present'}
2019-11-21 06:26:50,210 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_aodh_aodh_10.16.0.107] at time 06:26:50.210106 duration_in_ms=11.404
2019-11-21 06:26:50,210 [salt.state       :1780][INFO    ][18196] Running state [nova] at time 06:26:50.210326
2019-11-21 06:26:50,210 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [nova]
2019-11-21 06:26:50,214 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'nova' created
2019-11-21 06:26:50,214 [salt.state       :300 ][INFO    ][18196] {'nova': 'Present'}
2019-11-21 06:26:50,214 [salt.state       :1951][INFO    ][18196] Completed state [nova] at time 06:26:50.214436 duration_in_ms=4.11
2019-11-21 06:26:50,214 [salt.state       :1780][INFO    ][18196] Running state [nova] at time 06:26:50.214668
2019-11-21 06:26:50,214 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [nova]
2019-11-21 06:26:50,218 [salt.state       :300 ][INFO    ][18196] User nova@% is already present with the desired password
2019-11-21 06:26:50,218 [salt.state       :1951][INFO    ][18196] Completed state [nova] at time 06:26:50.218532 duration_in_ms=3.864
2019-11-21 06:26:50,220 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_nova_nova_%] at time 06:26:50.219991
2019-11-21 06:26:50,220 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_nova_nova_%]
2019-11-21 06:26:50,231 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'nova.*' for user 'nova' has been added
2019-11-21 06:26:50,231 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_nova_nova_%': 'Present'}
2019-11-21 06:26:50,231 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_nova_nova_%] at time 06:26:50.231797 duration_in_ms=11.806
2019-11-21 06:26:50,232 [salt.state       :1780][INFO    ][18196] Running state [nova] at time 06:26:50.232015
2019-11-21 06:26:50,232 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [nova]
2019-11-21 06:26:50,236 [salt.state       :300 ][INFO    ][18196] User nova@172.16.10.36 is already present with the desired password
2019-11-21 06:26:50,236 [salt.state       :1951][INFO    ][18196] Completed state [nova] at time 06:26:50.236675 duration_in_ms=4.659
2019-11-21 06:26:50,238 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_nova_nova_172.16.10.36] at time 06:26:50.238594
2019-11-21 06:26:50,238 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_nova_nova_172.16.10.36]
2019-11-21 06:26:50,254 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'nova.*' for user 'nova' has been added
2019-11-21 06:26:50,255 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_nova_nova_172.16.10.36': 'Present'}
2019-11-21 06:26:50,255 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_nova_nova_172.16.10.36] at time 06:26:50.255390 duration_in_ms=16.796
2019-11-21 06:26:50,255 [salt.state       :1780][INFO    ][18196] Running state [heat] at time 06:26:50.255716
2019-11-21 06:26:50,256 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [heat]
2019-11-21 06:26:50,261 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'heat' created
2019-11-21 06:26:50,261 [salt.state       :300 ][INFO    ][18196] {'heat': 'Present'}
2019-11-21 06:26:50,261 [salt.state       :1951][INFO    ][18196] Completed state [heat] at time 06:26:50.261683 duration_in_ms=5.966
2019-11-21 06:26:50,262 [salt.state       :1780][INFO    ][18196] Running state [heat] at time 06:26:50.261995
2019-11-21 06:26:50,262 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [heat]
2019-11-21 06:26:50,281 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'heat'@'%' has been created
2019-11-21 06:26:50,281 [salt.state       :300 ][INFO    ][18196] {'heat': 'Present'}
2019-11-21 06:26:50,281 [salt.state       :1951][INFO    ][18196] Completed state [heat] at time 06:26:50.281750 duration_in_ms=19.756
2019-11-21 06:26:50,283 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_heat_heat_%] at time 06:26:50.283778
2019-11-21 06:26:50,284 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_heat_heat_%]
2019-11-21 06:26:50,295 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'heat.*' for user 'heat' has been added
2019-11-21 06:26:50,295 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_heat_heat_%': 'Present'}
2019-11-21 06:26:50,295 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_heat_heat_%] at time 06:26:50.295539 duration_in_ms=11.761
2019-11-21 06:26:50,295 [salt.state       :1780][INFO    ][18196] Running state [heat] at time 06:26:50.295773
2019-11-21 06:26:50,296 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [heat]
2019-11-21 06:26:50,308 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'heat'@'172.16.10.36' has been created
2019-11-21 06:26:50,308 [salt.state       :300 ][INFO    ][18196] {'heat': 'Present'}
2019-11-21 06:26:50,308 [salt.state       :1951][INFO    ][18196] Completed state [heat] at time 06:26:50.308560 duration_in_ms=12.787
2019-11-21 06:26:50,309 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_heat_heat_172.16.10.36] at time 06:26:50.309928
2019-11-21 06:26:50,310 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_heat_heat_172.16.10.36]
2019-11-21 06:26:50,320 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'heat.*' for user 'heat' has been added
2019-11-21 06:26:50,321 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_heat_heat_172.16.10.36': 'Present'}
2019-11-21 06:26:50,321 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_heat_heat_172.16.10.36] at time 06:26:50.321332 duration_in_ms=11.404
2019-11-21 06:26:50,321 [salt.state       :1780][INFO    ][18196] Running state [panko] at time 06:26:50.321555
2019-11-21 06:26:50,321 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [panko]
2019-11-21 06:26:50,325 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'panko' created
2019-11-21 06:26:50,325 [salt.state       :300 ][INFO    ][18196] {'panko': 'Present'}
2019-11-21 06:26:50,325 [salt.state       :1951][INFO    ][18196] Completed state [panko] at time 06:26:50.325557 duration_in_ms=4.002
2019-11-21 06:26:50,325 [salt.state       :1780][INFO    ][18196] Running state [panko] at time 06:26:50.325786
2019-11-21 06:26:50,326 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [panko]
2019-11-21 06:26:50,339 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'panko'@'%' has been created
2019-11-21 06:26:50,339 [salt.state       :300 ][INFO    ][18196] {'panko': 'Present'}
2019-11-21 06:26:50,339 [salt.state       :1951][INFO    ][18196] Completed state [panko] at time 06:26:50.339738 duration_in_ms=13.952
2019-11-21 06:26:50,341 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_panko_panko_%] at time 06:26:50.341256
2019-11-21 06:26:50,341 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_panko_panko_%]
2019-11-21 06:26:50,351 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'panko.*' for user 'panko' has been added
2019-11-21 06:26:50,352 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_panko_panko_%': 'Present'}
2019-11-21 06:26:50,352 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_panko_panko_%] at time 06:26:50.352159 duration_in_ms=10.903
2019-11-21 06:26:50,352 [salt.state       :1780][INFO    ][18196] Running state [panko] at time 06:26:50.352387
2019-11-21 06:26:50,352 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [panko]
2019-11-21 06:26:50,366 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'panko'@'172.16.10.36' has been created
2019-11-21 06:26:50,366 [salt.state       :300 ][INFO    ][18196] {'panko': 'Present'}
2019-11-21 06:26:50,366 [salt.state       :1951][INFO    ][18196] Completed state [panko] at time 06:26:50.366793 duration_in_ms=14.406
2019-11-21 06:26:50,368 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_panko_panko_172.16.10.36] at time 06:26:50.368343
2019-11-21 06:26:50,368 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_panko_panko_172.16.10.36]
2019-11-21 06:26:50,381 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'panko.*' for user 'panko' has been added
2019-11-21 06:26:50,381 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_panko_panko_172.16.10.36': 'Present'}
2019-11-21 06:26:50,382 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_panko_panko_172.16.10.36] at time 06:26:50.381950 duration_in_ms=13.607
2019-11-21 06:26:50,382 [salt.state       :1780][INFO    ][18196] Running state [keystone] at time 06:26:50.382226
2019-11-21 06:26:50,382 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [keystone]
2019-11-21 06:26:50,386 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'keystone' created
2019-11-21 06:26:50,387 [salt.state       :300 ][INFO    ][18196] {'keystone': 'Present'}
2019-11-21 06:26:50,387 [salt.state       :1951][INFO    ][18196] Completed state [keystone] at time 06:26:50.387298 duration_in_ms=5.072
2019-11-21 06:26:50,387 [salt.state       :1780][INFO    ][18196] Running state [keystone] at time 06:26:50.387569
2019-11-21 06:26:50,387 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [keystone]
2019-11-21 06:26:50,403 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'keystone'@'%' has been created
2019-11-21 06:26:50,403 [salt.state       :300 ][INFO    ][18196] {'keystone': 'Present'}
2019-11-21 06:26:50,403 [salt.state       :1951][INFO    ][18196] Completed state [keystone] at time 06:26:50.403670 duration_in_ms=16.101
2019-11-21 06:26:50,405 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_keystone_keystone_%] at time 06:26:50.405240
2019-11-21 06:26:50,405 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_keystone_keystone_%]
2019-11-21 06:26:50,415 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'keystone.*' for user 'keystone' has been added
2019-11-21 06:26:50,415 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_keystone_keystone_%': 'Present'}
2019-11-21 06:26:50,416 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_keystone_keystone_%] at time 06:26:50.416129 duration_in_ms=10.889
2019-11-21 06:26:50,416 [salt.state       :1780][INFO    ][18196] Running state [keystone] at time 06:26:50.416351
2019-11-21 06:26:50,416 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [keystone]
2019-11-21 06:26:50,429 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'keystone'@'172.16.10.36' has been created
2019-11-21 06:26:50,429 [salt.state       :300 ][INFO    ][18196] {'keystone': 'Present'}
2019-11-21 06:26:50,429 [salt.state       :1951][INFO    ][18196] Completed state [keystone] at time 06:26:50.429607 duration_in_ms=13.256
2019-11-21 06:26:50,431 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_keystone_keystone_172.16.10.36] at time 06:26:50.430995
2019-11-21 06:26:50,431 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_keystone_keystone_172.16.10.36]
2019-11-21 06:26:50,441 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'keystone.*' for user 'keystone' has been added
2019-11-21 06:26:50,441 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_keystone_keystone_172.16.10.36': 'Present'}
2019-11-21 06:26:50,441 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_keystone_keystone_172.16.10.36] at time 06:26:50.441940 duration_in_ms=10.945
2019-11-21 06:26:50,442 [salt.state       :1780][INFO    ][18196] Running state [nova_cell0] at time 06:26:50.442161
2019-11-21 06:26:50,442 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [nova_cell0]
2019-11-21 06:26:50,445 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'nova_cell0' created
2019-11-21 06:26:50,446 [salt.state       :300 ][INFO    ][18196] {'nova_cell0': 'Present'}
2019-11-21 06:26:50,446 [salt.state       :1951][INFO    ][18196] Completed state [nova_cell0] at time 06:26:50.446282 duration_in_ms=4.121
2019-11-21 06:26:50,446 [salt.state       :1780][INFO    ][18196] Running state [nova] at time 06:26:50.446501
2019-11-21 06:26:50,446 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [nova]
2019-11-21 06:26:50,449 [salt.state       :300 ][INFO    ][18196] User nova@% is already present with the desired password
2019-11-21 06:26:50,450 [salt.state       :1951][INFO    ][18196] Completed state [nova] at time 06:26:50.450104 duration_in_ms=3.603
2019-11-21 06:26:50,451 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_nova_nova_cell0_%] at time 06:26:50.451616
2019-11-21 06:26:50,451 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_nova_nova_cell0_%]
2019-11-21 06:26:50,463 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'nova_cell0.*' for user 'nova' has been added
2019-11-21 06:26:50,463 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_nova_nova_cell0_%': 'Present'}
2019-11-21 06:26:50,463 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_nova_nova_cell0_%] at time 06:26:50.463651 duration_in_ms=12.035
2019-11-21 06:26:50,463 [salt.state       :1780][INFO    ][18196] Running state [nova] at time 06:26:50.463868
2019-11-21 06:26:50,464 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [nova]
2019-11-21 06:26:50,467 [salt.state       :300 ][INFO    ][18196] User nova@172.16.10.36 is already present with the desired password
2019-11-21 06:26:50,467 [salt.state       :1951][INFO    ][18196] Completed state [nova] at time 06:26:50.467363 duration_in_ms=3.495
2019-11-21 06:26:50,468 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_nova_nova_cell0_172.16.10.36] at time 06:26:50.468740
2019-11-21 06:26:50,469 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_nova_nova_cell0_172.16.10.36]
2019-11-21 06:26:50,481 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'nova_cell0.*' for user 'nova' has been added
2019-11-21 06:26:50,481 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_nova_nova_cell0_172.16.10.36': 'Present'}
2019-11-21 06:26:50,481 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_nova_nova_cell0_172.16.10.36] at time 06:26:50.481517 duration_in_ms=12.777
2019-11-21 06:26:50,481 [salt.state       :1780][INFO    ][18196] Running state [cinder] at time 06:26:50.481735
2019-11-21 06:26:50,481 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [cinder]
2019-11-21 06:26:50,485 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'cinder' created
2019-11-21 06:26:50,486 [salt.state       :300 ][INFO    ][18196] {'cinder': 'Present'}
2019-11-21 06:26:50,486 [salt.state       :1951][INFO    ][18196] Completed state [cinder] at time 06:26:50.486390 duration_in_ms=4.655
2019-11-21 06:26:50,486 [salt.state       :1780][INFO    ][18196] Running state [cinder] at time 06:26:50.486635
2019-11-21 06:26:50,486 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [cinder]
2019-11-21 06:26:50,501 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'cinder'@'%' has been created
2019-11-21 06:26:50,502 [salt.state       :300 ][INFO    ][18196] {'cinder': 'Present'}
2019-11-21 06:26:50,502 [salt.state       :1951][INFO    ][18196] Completed state [cinder] at time 06:26:50.502333 duration_in_ms=15.698
2019-11-21 06:26:50,503 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_cinder_cinder_%] at time 06:26:50.503816
2019-11-21 06:26:50,504 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_cinder_cinder_%]
2019-11-21 06:26:50,514 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'cinder.*' for user 'cinder' has been added
2019-11-21 06:26:50,514 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_cinder_cinder_%': 'Present'}
2019-11-21 06:26:50,514 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_cinder_cinder_%] at time 06:26:50.514594 duration_in_ms=10.778
2019-11-21 06:26:50,514 [salt.state       :1780][INFO    ][18196] Running state [cinder] at time 06:26:50.514813
2019-11-21 06:26:50,515 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [cinder]
2019-11-21 06:26:50,527 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'cinder'@'172.16.10.36' has been created
2019-11-21 06:26:50,527 [salt.state       :300 ][INFO    ][18196] {'cinder': 'Present'}
2019-11-21 06:26:50,527 [salt.state       :1951][INFO    ][18196] Completed state [cinder] at time 06:26:50.527850 duration_in_ms=13.037
2019-11-21 06:26:50,529 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_cinder_cinder_172.16.10.36] at time 06:26:50.529264
2019-11-21 06:26:50,529 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_cinder_cinder_172.16.10.36]
2019-11-21 06:26:50,539 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'cinder.*' for user 'cinder' has been added
2019-11-21 06:26:50,539 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_cinder_cinder_172.16.10.36': 'Present'}
2019-11-21 06:26:50,540 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_cinder_cinder_172.16.10.36] at time 06:26:50.540137 duration_in_ms=10.873
2019-11-21 06:26:50,540 [salt.state       :1780][INFO    ][18196] Running state [glance] at time 06:26:50.540357
2019-11-21 06:26:50,540 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [glance]
2019-11-21 06:26:50,544 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'glance' created
2019-11-21 06:26:50,544 [salt.state       :300 ][INFO    ][18196] {'glance': 'Present'}
2019-11-21 06:26:50,544 [salt.state       :1951][INFO    ][18196] Completed state [glance] at time 06:26:50.544474 duration_in_ms=4.117
2019-11-21 06:26:50,544 [salt.state       :1780][INFO    ][18196] Running state [glance] at time 06:26:50.544694
2019-11-21 06:26:50,544 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [glance]
2019-11-21 06:26:50,557 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'glance'@'%' has been created
2019-11-21 06:26:50,557 [salt.state       :300 ][INFO    ][18196] {'glance': 'Present'}
2019-11-21 06:26:50,557 [salt.state       :1951][INFO    ][18196] Completed state [glance] at time 06:26:50.557723 duration_in_ms=13.029
2019-11-21 06:26:50,559 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_glance_glance_%] at time 06:26:50.559205
2019-11-21 06:26:50,559 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_glance_glance_%]
2019-11-21 06:26:50,570 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'glance.*' for user 'glance' has been added
2019-11-21 06:26:50,570 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_glance_glance_%': 'Present'}
2019-11-21 06:26:50,570 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_glance_glance_%] at time 06:26:50.570695 duration_in_ms=11.49
2019-11-21 06:26:50,570 [salt.state       :1780][INFO    ][18196] Running state [glance] at time 06:26:50.570912
2019-11-21 06:26:50,571 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [glance]
2019-11-21 06:26:50,583 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'glance'@'172.16.10.36' has been created
2019-11-21 06:26:50,583 [salt.state       :300 ][INFO    ][18196] {'glance': 'Present'}
2019-11-21 06:26:50,584 [salt.state       :1951][INFO    ][18196] Completed state [glance] at time 06:26:50.583995 duration_in_ms=13.083
2019-11-21 06:26:50,585 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_glance_glance_172.16.10.36] at time 06:26:50.585419
2019-11-21 06:26:50,585 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_glance_glance_172.16.10.36]
2019-11-21 06:26:50,595 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'glance.*' for user 'glance' has been added
2019-11-21 06:26:50,596 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_glance_glance_172.16.10.36': 'Present'}
2019-11-21 06:26:50,596 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_glance_glance_172.16.10.36] at time 06:26:50.596288 duration_in_ms=10.869
2019-11-21 06:26:50,596 [salt.state       :1780][INFO    ][18196] Running state [gnocchi] at time 06:26:50.596506
2019-11-21 06:26:50,596 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [gnocchi]
2019-11-21 06:26:50,600 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'gnocchi' created
2019-11-21 06:26:50,600 [salt.state       :300 ][INFO    ][18196] {'gnocchi': 'Present'}
2019-11-21 06:26:50,600 [salt.state       :1951][INFO    ][18196] Completed state [gnocchi] at time 06:26:50.600534 duration_in_ms=4.029
2019-11-21 06:26:50,600 [salt.state       :1780][INFO    ][18196] Running state [gnocchi] at time 06:26:50.600753
2019-11-21 06:26:50,600 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [gnocchi]
2019-11-21 06:26:50,613 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'gnocchi'@'%' has been created
2019-11-21 06:26:50,614 [salt.state       :300 ][INFO    ][18196] {'gnocchi': 'Present'}
2019-11-21 06:26:50,614 [salt.state       :1951][INFO    ][18196] Completed state [gnocchi] at time 06:26:50.614387 duration_in_ms=13.634
2019-11-21 06:26:50,616 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_gnocchi_gnocchi_%] at time 06:26:50.616350
2019-11-21 06:26:50,616 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_gnocchi_gnocchi_%]
2019-11-21 06:26:50,628 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'gnocchi.*' for user 'gnocchi' has been added
2019-11-21 06:26:50,628 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_gnocchi_gnocchi_%': 'Present'}
2019-11-21 06:26:50,628 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_gnocchi_gnocchi_%] at time 06:26:50.628621 duration_in_ms=12.271
2019-11-21 06:26:50,628 [salt.state       :1780][INFO    ][18196] Running state [gnocchi] at time 06:26:50.628861
2019-11-21 06:26:50,629 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [gnocchi]
2019-11-21 06:26:50,642 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'gnocchi'@'172.16.10.36' has been created
2019-11-21 06:26:50,642 [salt.state       :300 ][INFO    ][18196] {'gnocchi': 'Present'}
2019-11-21 06:26:50,643 [salt.state       :1951][INFO    ][18196] Completed state [gnocchi] at time 06:26:50.643148 duration_in_ms=14.286
2019-11-21 06:26:50,644 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_gnocchi_gnocchi_172.16.10.36] at time 06:26:50.644676
2019-11-21 06:26:50,644 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_gnocchi_gnocchi_172.16.10.36]
2019-11-21 06:26:50,656 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'gnocchi.*' for user 'gnocchi' has been added
2019-11-21 06:26:50,656 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_gnocchi_gnocchi_172.16.10.36': 'Present'}
2019-11-21 06:26:50,656 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_gnocchi_gnocchi_172.16.10.36] at time 06:26:50.656632 duration_in_ms=11.955
2019-11-21 06:26:50,656 [salt.state       :1780][INFO    ][18196] Running state [barbican] at time 06:26:50.656869
2019-11-21 06:26:50,657 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [barbican]
2019-11-21 06:26:50,660 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'barbican' created
2019-11-21 06:26:50,661 [salt.state       :300 ][INFO    ][18196] {'barbican': 'Present'}
2019-11-21 06:26:50,661 [salt.state       :1951][INFO    ][18196] Completed state [barbican] at time 06:26:50.661376 duration_in_ms=4.507
2019-11-21 06:26:50,661 [salt.state       :1780][INFO    ][18196] Running state [barbican] at time 06:26:50.661614
2019-11-21 06:26:50,661 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [barbican]
2019-11-21 06:26:50,675 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'barbican'@'%' has been created
2019-11-21 06:26:50,675 [salt.state       :300 ][INFO    ][18196] {'barbican': 'Present'}
2019-11-21 06:26:50,676 [salt.state       :1951][INFO    ][18196] Completed state [barbican] at time 06:26:50.676081 duration_in_ms=14.467
2019-11-21 06:26:50,677 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_barbican_barbican_%] at time 06:26:50.677784
2019-11-21 06:26:50,678 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_barbican_barbican_%]
2019-11-21 06:26:50,689 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'barbican.*' for user 'barbican' has been added
2019-11-21 06:26:50,689 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_barbican_barbican_%': 'Present'}
2019-11-21 06:26:50,689 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_barbican_barbican_%] at time 06:26:50.689657 duration_in_ms=11.873
2019-11-21 06:26:50,689 [salt.state       :1780][INFO    ][18196] Running state [barbican] at time 06:26:50.689897
2019-11-21 06:26:50,690 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [barbican]
2019-11-21 06:26:50,703 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'barbican'@'10.16.0.107' has been created
2019-11-21 06:26:50,703 [salt.state       :300 ][INFO    ][18196] {'barbican': 'Present'}
2019-11-21 06:26:50,704 [salt.state       :1951][INFO    ][18196] Completed state [barbican] at time 06:26:50.703976 duration_in_ms=14.079
2019-11-21 06:26:50,705 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_barbican_barbican_10.16.0.107] at time 06:26:50.705421
2019-11-21 06:26:50,705 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_barbican_barbican_10.16.0.107]
2019-11-21 06:26:50,715 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'barbican.*' for user 'barbican' has been added
2019-11-21 06:26:50,716 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_barbican_barbican_10.16.0.107': 'Present'}
2019-11-21 06:26:50,716 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_barbican_barbican_10.16.0.107] at time 06:26:50.716347 duration_in_ms=10.925
2019-11-21 06:26:50,716 [salt.state       :1780][INFO    ][18196] Running state [neutron] at time 06:26:50.716575
2019-11-21 06:26:50,716 [salt.state       :1813][INFO    ][18196] Executing state mysql_database.present for [neutron]
2019-11-21 06:26:50,720 [salt.loaded.int.module.mysql:1101][INFO    ][18196] DB 'neutron' created
2019-11-21 06:26:50,720 [salt.state       :300 ][INFO    ][18196] {'neutron': 'Present'}
2019-11-21 06:26:50,720 [salt.state       :1951][INFO    ][18196] Completed state [neutron] at time 06:26:50.720727 duration_in_ms=4.152
2019-11-21 06:26:50,720 [salt.state       :1780][INFO    ][18196] Running state [neutron] at time 06:26:50.720949
2019-11-21 06:26:50,721 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [neutron]
2019-11-21 06:26:50,733 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'neutron'@'%' has been created
2019-11-21 06:26:50,733 [salt.state       :300 ][INFO    ][18196] {'neutron': 'Present'}
2019-11-21 06:26:50,734 [salt.state       :1951][INFO    ][18196] Completed state [neutron] at time 06:26:50.734057 duration_in_ms=13.108
2019-11-21 06:26:50,736 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_neutron_neutron_%] at time 06:26:50.736139
2019-11-21 06:26:50,736 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_neutron_neutron_%]
2019-11-21 06:26:50,748 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'neutron.*' for user 'neutron' has been added
2019-11-21 06:26:50,749 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_neutron_neutron_%': 'Present'}
2019-11-21 06:26:50,749 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_neutron_neutron_%] at time 06:26:50.749275 duration_in_ms=13.136
2019-11-21 06:26:50,749 [salt.state       :1780][INFO    ][18196] Running state [neutron] at time 06:26:50.749522
2019-11-21 06:26:50,749 [salt.state       :1813][INFO    ][18196] Executing state mysql_user.present for [neutron]
2019-11-21 06:26:50,763 [salt.loaded.int.module.mysql:1383][INFO    ][18196] User 'neutron'@'172.16.10.36' has been created
2019-11-21 06:26:50,764 [salt.state       :300 ][INFO    ][18196] {'neutron': 'Present'}
2019-11-21 06:26:50,764 [salt.state       :1951][INFO    ][18196] Completed state [neutron] at time 06:26:50.764367 duration_in_ms=14.844
2019-11-21 06:26:50,766 [salt.state       :1780][INFO    ][18196] Running state [mysql_grants_neutron_neutron_172.16.10.36] at time 06:26:50.766031
2019-11-21 06:26:50,766 [salt.state       :1813][INFO    ][18196] Executing state mysql_grants.present for [mysql_grants_neutron_neutron_172.16.10.36]
2019-11-21 06:26:50,777 [salt.loaded.int.module.mysql:1870][INFO    ][18196] Grant 'all' on 'neutron.*' for user 'neutron' has been added
2019-11-21 06:26:50,778 [salt.state       :300 ][INFO    ][18196] {'mysql_grants_neutron_neutron_172.16.10.36': 'Present'}
2019-11-21 06:26:50,778 [salt.state       :1951][INFO    ][18196] Completed state [mysql_grants_neutron_neutron_172.16.10.36] at time 06:26:50.778311 duration_in_ms=12.28
2019-11-21 06:26:50,793 [salt.minion      :1711][INFO    ][18196] Returning information for job: 20191121062606487918
2019-11-21 06:26:51,595 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121062651582737
2019-11-21 06:26:51,620 [salt.minion      :1432][INFO    ][20568] Starting a new job with PID 20568
2019-11-21 06:26:58,306 [salt.state       :915 ][INFO    ][20568] Loading fresh modules for state activity
2019-11-21 06:26:58,363 [salt.fileclient  :1219][INFO    ][20568] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2019-11-21 06:26:58,392 [salt.fileclient  :1219][INFO    ][20568] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2019-11-21 06:26:58,419 [salt.fileclient  :1219][INFO    ][20568] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2019-11-21 06:26:58,685 [keyring.backend  :154 ][INFO    ][20568] Loading Windows (alt)
2019-11-21 06:26:58,688 [keyring.backend  :154 ][INFO    ][20568] Loading pyfs
2019-11-21 06:26:58,689 [keyring.backend  :154 ][INFO    ][20568] Loading multi
2019-11-21 06:26:58,690 [keyring.backend  :154 ][INFO    ][20568] Loading Google
2019-11-21 06:26:58,691 [keyring.backend  :154 ][INFO    ][20568] Loading Gnome
2019-11-21 06:26:58,696 [keyring.backend  :154 ][INFO    ][20568] Loading keyczar
2019-11-21 06:26:58,696 [keyring.backend  :154 ][INFO    ][20568] Loading file
2019-11-21 06:26:58,696 [keyring.backend  :154 ][INFO    ][20568] Loading kwallet
2019-11-21 06:26:59,366 [salt.state       :1780][INFO    ][20568] Running state [memcached] at time 06:26:59.366160
2019-11-21 06:26:59,366 [salt.state       :1813][INFO    ][20568] Executing state pkg.installed for [memcached]
2019-11-21 06:26:59,367 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:26:59,761 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2019-11-21 06:26:59,840 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:27:02,408 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:27:02,437 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2019-11-21 06:27:06,128 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:27:06,177 [salt.state       :300 ][INFO    ][20568] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.5'

2019-11-21 06:27:06,201 [salt.state       :915 ][INFO    ][20568] Loading fresh modules for state activity
2019-11-21 06:27:06,244 [salt.state       :1951][INFO    ][20568] Completed state [memcached] at time 06:27:06.244393 duration_in_ms=6878.233
2019-11-21 06:27:06,252 [salt.state       :1780][INFO    ][20568] Running state [python-memcache] at time 06:27:06.252055
2019-11-21 06:27:06,252 [salt.state       :1813][INFO    ][20568] Executing state pkg.installed for [python-memcache]
2019-11-21 06:27:07,019 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062706663592
2019-11-21 06:27:07,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:27:07,034 [salt.minion      :1432][INFO    ][21384] Starting a new job with PID 21384
2019-11-21 06:27:07,047 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2019-11-21 06:27:07,050 [salt.minion      :1711][INFO    ][21384] Returning information for job: 20191121062706663592
2019-11-21 06:27:09,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:27:09,712 [salt.state       :300 ][INFO    ][20568] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2019-11-21 06:27:09,733 [salt.state       :915 ][INFO    ][20568] Loading fresh modules for state activity
2019-11-21 06:27:09,811 [salt.state       :1951][INFO    ][20568] Completed state [python-memcache] at time 06:27:09.810945 duration_in_ms=3558.887
2019-11-21 06:27:09,819 [salt.state       :1780][INFO    ][20568] Running state [/etc/memcached.conf] at time 06:27:09.819783
2019-11-21 06:27:09,820 [salt.state       :1813][INFO    ][20568] Executing state file.managed for [/etc/memcached.conf]
2019-11-21 06:27:09,858 [salt.fileclient  :1219][INFO    ][20568] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2019-11-21 06:27:09,898 [salt.state       :300 ][INFO    ][20568] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,11 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +29,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +44,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2019-11-21 06:27:09,898 [salt.state       :1951][INFO    ][20568] Completed state [/etc/memcached.conf] at time 06:27:09.898633 duration_in_ms=78.851
2019-11-21 06:27:10,440 [salt.state       :1780][INFO    ][20568] Running state [memcached] at time 06:27:10.440514
2019-11-21 06:27:10,440 [salt.state       :1813][INFO    ][20568] Executing state service.running for [memcached]
2019-11-21 06:27:10,441 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2019-11-21 06:27:10,462 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-11-21 06:27:10,481 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2019-11-21 06:27:10,504 [salt.state       :300 ][INFO    ][20568] The service memcached is already running
2019-11-21 06:27:10,504 [salt.state       :1951][INFO    ][20568] Completed state [memcached] at time 06:27:10.504616 duration_in_ms=64.103
2019-11-21 06:27:10,504 [salt.state       :1780][INFO    ][20568] Running state [memcached] at time 06:27:10.504883
2019-11-21 06:27:10,505 [salt.state       :1813][INFO    ][20568] Executing state service.mod_watch for [memcached]
2019-11-21 06:27:10,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-11-21 06:27:10,521 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20568] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2019-11-21 06:27:10,548 [salt.state       :300 ][INFO    ][20568] {'memcached': True}
2019-11-21 06:27:10,548 [salt.state       :1951][INFO    ][20568] Completed state [memcached] at time 06:27:10.548630 duration_in_ms=43.746
2019-11-21 06:27:10,553 [salt.minion      :1711][INFO    ][20568] Returning information for job: 20191121062651582737
2019-11-21 06:27:11,215 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121062711201895
2019-11-21 06:27:11,238 [salt.minion      :1432][INFO    ][21564] Starting a new job with PID 21564
2019-11-21 06:27:12,949 [salt.state       :915 ][INFO    ][21564] Loading fresh modules for state activity
2019-11-21 06:27:13,013 [salt.fileclient  :1219][INFO    ][21564] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2019-11-21 06:27:13,050 [salt.fileclient  :1219][INFO    ][21564] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2019-11-21 06:27:13,424 [keyring.backend  :154 ][INFO    ][21564] Loading Windows (alt)
2019-11-21 06:27:13,427 [keyring.backend  :154 ][INFO    ][21564] Loading pyfs
2019-11-21 06:27:13,428 [keyring.backend  :154 ][INFO    ][21564] Loading multi
2019-11-21 06:27:13,429 [keyring.backend  :154 ][INFO    ][21564] Loading Google
2019-11-21 06:27:13,430 [keyring.backend  :154 ][INFO    ][21564] Loading Gnome
2019-11-21 06:27:13,434 [keyring.backend  :154 ][INFO    ][21564] Loading keyczar
2019-11-21 06:27:13,434 [keyring.backend  :154 ][INFO    ][21564] Loading file
2019-11-21 06:27:13,434 [keyring.backend  :154 ][INFO    ][21564] Loading kwallet
2019-11-21 06:27:14,123 [salt.state       :1780][INFO    ][21564] Running state [haproxy] at time 06:27:14.123793
2019-11-21 06:27:14,125 [salt.state       :1813][INFO    ][21564] Executing state pkg.installed for [haproxy]
2019-11-21 06:27:14,126 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:27:14,564 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2019-11-21 06:27:14,656 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:27:16,679 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:27:16,710 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2019-11-21 06:27:20,699 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:27:20,766 [salt.state       :300 ][INFO    ][21564] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.3'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2.1'

2019-11-21 06:27:20,790 [salt.state       :915 ][INFO    ][21564] Loading fresh modules for state activity
2019-11-21 06:27:20,830 [salt.state       :1951][INFO    ][21564] Completed state [haproxy] at time 06:27:20.830182 duration_in_ms=6706.389
2019-11-21 06:27:20,834 [salt.state       :1780][INFO    ][21564] Running state [/etc/default/haproxy] at time 06:27:20.834565
2019-11-21 06:27:20,834 [salt.state       :1813][INFO    ][21564] Executing state file.managed for [/etc/default/haproxy]
2019-11-21 06:27:20,866 [salt.fileclient  :1219][INFO    ][21564] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2019-11-21 06:27:20,869 [salt.state       :300 ][INFO    ][21564] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2019-11-21 06:27:20,869 [salt.state       :1951][INFO    ][21564] Completed state [/etc/default/haproxy] at time 06:27:20.869432 duration_in_ms=34.867
2019-11-21 06:27:20,869 [salt.state       :1780][INFO    ][21564] Running state [/etc/haproxy/haproxy.cfg] at time 06:27:20.869852
2019-11-21 06:27:20,870 [salt.state       :1813][INFO    ][21564] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2019-11-21 06:27:20,894 [salt.fileclient  :1219][INFO    ][21564] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2019-11-21 06:27:21,078 [salt.state       :300 ][INFO    ][21564] File changed:
--- 
+++ 
@@ -1,35 +1,162 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  25000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen keystone_public_api
+  bind 10.16.0.107:5000 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:5000 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen nova_api
+  bind 10.16.0.107:8774 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8774 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen nova_placement_api
+  bind 10.16.0.107:8778 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8778 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen keystone_admin_api
+  bind 10.16.0.107:35357 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:35357 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen glance_registry_api
+  bind 10.16.0.107:9191 
+  mode http
+  balance roundrobin
+  option  httplog
+  server ctl01 172.16.10.36:9191 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen neutron_api
+  bind 10.16.0.107:9696 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:9696 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen cinder_api
+  bind 10.16.0.107:8776 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8776 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen heat_cfn_api
+  bind 10.16.0.107:8000 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8000 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen glance_api
+  bind 10.16.0.107:9292 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:9292 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen barbican_admin_api
+  bind 10.16.0.107:9312 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:9312 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen heat_api
+  bind 10.16.0.107:8004 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8004 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen nova_metadata_api
+  bind 10.16.0.107:8775 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8775 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen aodh-api
+  bind 10.16.0.107:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8042 check inter 30m fastinter 2s downinter 4s rise 3 fall 3
+
+listen barbican_api
+  bind 10.16.0.107:9311 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:9311 check inter 30m fastinter 2s downinter 4s rise 3 fall 3

2019-11-21 06:27:21,081 [salt.state       :1951][INFO    ][21564] Completed state [/etc/haproxy/haproxy.cfg] at time 06:27:21.081341 duration_in_ms=211.488
2019-11-21 06:27:21,082 [salt.state       :1780][INFO    ][21564] Running state [/etc/haproxy/ssl] at time 06:27:21.081971
2019-11-21 06:27:21,082 [salt.state       :1813][INFO    ][21564] Executing state file.directory for [/etc/haproxy/ssl]
2019-11-21 06:27:21,085 [salt.state       :300 ][INFO    ][21564] {'/etc/haproxy/ssl': 'New Dir'}
2019-11-21 06:27:21,085 [salt.state       :1951][INFO    ][21564] Completed state [/etc/haproxy/ssl] at time 06:27:21.085821 duration_in_ms=3.849
2019-11-21 06:27:21,086 [salt.state       :1780][INFO    ][21564] Running state [/etc/haproxy/errors/429.http11] at time 06:27:21.086448
2019-11-21 06:27:21,086 [salt.state       :1813][INFO    ][21564] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2019-11-21 06:27:21,111 [salt.fileclient  :1219][INFO    ][21564] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2019-11-21 06:27:21,123 [salt.state       :300 ][INFO    ][21564] File changed:
New file
2019-11-21 06:27:21,124 [salt.state       :1951][INFO    ][21564] Completed state [/etc/haproxy/errors/429.http11] at time 06:27:21.124051 duration_in_ms=37.603
2019-11-21 06:27:21,125 [salt.state       :1780][INFO    ][21564] Running state [haproxy_status_packages] at time 06:27:21.125866
2019-11-21 06:27:21,126 [salt.state       :1813][INFO    ][21564] Executing state pkg.installed for [haproxy_status_packages]
2019-11-21 06:27:21,796 [salt.state       :300 ][INFO    ][21564] All specified packages are already installed
2019-11-21 06:27:21,796 [salt.state       :1951][INFO    ][21564] Completed state [haproxy_status_packages] at time 06:27:21.796456 duration_in_ms=670.591
2019-11-21 06:27:21,797 [salt.state       :1780][INFO    ][21564] Running state [/usr/bin/haproxy-status.sh] at time 06:27:21.797128
2019-11-21 06:27:21,797 [salt.state       :1813][INFO    ][21564] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2019-11-21 06:27:21,819 [salt.fileclient  :1219][INFO    ][21564] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2019-11-21 06:27:21,846 [salt.state       :300 ][INFO    ][21564] File changed:
New file
2019-11-21 06:27:21,846 [salt.state       :1951][INFO    ][21564] Completed state [/usr/bin/haproxy-status.sh] at time 06:27:21.846357 duration_in_ms=49.228
2019-11-21 06:27:21,847 [salt.state       :1780][INFO    ][21564] Running state [net.ipv4.ip_nonlocal_bind] at time 06:27:21.847393
2019-11-21 06:27:21,847 [salt.state       :1813][INFO    ][21564] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2019-11-21 06:27:21,848 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2019-11-21 06:27:21,861 [salt.state       :300 ][INFO    ][21564] {'net.ipv4.ip_nonlocal_bind': 1}
2019-11-21 06:27:21,861 [salt.state       :1951][INFO    ][21564] Completed state [net.ipv4.ip_nonlocal_bind] at time 06:27:21.861792 duration_in_ms=14.399
2019-11-21 06:27:21,863 [salt.state       :1780][INFO    ][21564] Running state [haproxy] at time 06:27:21.863353
2019-11-21 06:27:21,863 [salt.state       :1813][INFO    ][21564] Executing state service.running for [haproxy]
2019-11-21 06:27:21,864 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-11-21 06:27:21,880 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-11-21 06:27:21,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2019-11-21 06:27:21,907 [salt.state       :300 ][INFO    ][21564] The service haproxy is already running
2019-11-21 06:27:21,907 [salt.state       :1951][INFO    ][21564] Completed state [haproxy] at time 06:27:21.907451 duration_in_ms=44.098
2019-11-21 06:27:21,907 [salt.state       :1780][INFO    ][21564] Running state [haproxy] at time 06:27:21.907710
2019-11-21 06:27:21,908 [salt.state       :1813][INFO    ][21564] Executing state service.mod_watch for [haproxy]
2019-11-21 06:27:21,908 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-11-21 06:27:21,922 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21564] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2019-11-21 06:27:21,978 [salt.state       :300 ][INFO    ][21564] {'haproxy': True}
2019-11-21 06:27:21,979 [salt.state       :1951][INFO    ][21564] Completed state [haproxy] at time 06:27:21.979844 duration_in_ms=72.133
2019-11-21 06:27:21,986 [salt.minion      :1711][INFO    ][21564] Returning information for job: 20191121062711201895
2019-11-21 06:27:22,605 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121062722595730
2019-11-21 06:27:22,618 [salt.minion      :1432][INFO    ][22473] Starting a new job with PID 22473
2019-11-21 06:27:29,194 [salt.state       :915 ][INFO    ][22473] Loading fresh modules for state activity
2019-11-21 06:27:29,250 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'keystone/server.sls'
2019-11-21 06:27:29,479 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2019-11-21 06:27:29,517 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2019-11-21 06:27:29,552 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2019-11-21 06:27:29,645 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2019-11-21 06:27:29,726 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2019-11-21 06:27:29,832 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2019-11-21 06:27:29,982 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2019-11-21 06:27:30,050 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2019-11-21 06:27:30,121 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'keystone/db/offline_sync.sls'
2019-11-21 06:27:30,186 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'keystone/_ssl/mysql.sls'
2019-11-21 06:27:30,260 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'keystone/_ssl/rabbitmq.sls'
2019-11-21 06:27:30,594 [keyring.backend  :154 ][INFO    ][22473] Loading Windows (alt)
2019-11-21 06:27:30,598 [keyring.backend  :154 ][INFO    ][22473] Loading pyfs
2019-11-21 06:27:30,599 [keyring.backend  :154 ][INFO    ][22473] Loading multi
2019-11-21 06:27:30,600 [keyring.backend  :154 ][INFO    ][22473] Loading Google
2019-11-21 06:27:30,601 [keyring.backend  :154 ][INFO    ][22473] Loading Gnome
2019-11-21 06:27:30,605 [keyring.backend  :154 ][INFO    ][22473] Loading keyczar
2019-11-21 06:27:30,605 [keyring.backend  :154 ][INFO    ][22473] Loading file
2019-11-21 06:27:30,605 [keyring.backend  :154 ][INFO    ][22473] Loading kwallet
2019-11-21 06:27:31,355 [salt.state       :1780][INFO    ][22473] Running state [keystone] at time 06:27:31.355092
2019-11-21 06:27:31,355 [salt.state       :1813][INFO    ][22473] Executing state pkg.installed for [keystone]
2019-11-21 06:27:31,356 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:27:31,804 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['apt-cache', '-q', 'policy', 'keystone'] in directory '/root'
2019-11-21 06:27:31,899 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:27:34,126 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:27:34,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keystone'] in directory '/root'
2019-11-21 06:27:37,685 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062737664874
2019-11-21 06:27:37,708 [salt.minion      :1432][INFO    ][22875] Starting a new job with PID 22875
2019-11-21 06:27:37,728 [salt.minion      :1711][INFO    ][22875] Returning information for job: 20191121062737664874
2019-11-21 06:28:07,754 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062807733572
2019-11-21 06:28:07,776 [salt.minion      :1432][INFO    ][25430] Starting a new job with PID 25430
2019-11-21 06:28:07,794 [salt.minion      :1711][INFO    ][25430] Returning information for job: 20191121062807733572
2019-11-21 06:28:11,299 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:28:11,349 [salt.state       :300 ][INFO    ][22473] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'libapr1' changed from 'absent' to '1.5.2-3'
'python-kombu' changed from 'absent' to '4.1.0-2~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.27.0-2~u16.04+mcp8'
'python-kafka' changed from 'absent' to '1.3.2-1.1~u16.04+mcp2'
'python-testscenarios' changed from 'absent' to '0.4-4'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-pycadf' changed from 'absent' to '2.7.0-1~u16.04+mcp5'
'xmlsec1' changed from 'absent' to '1.2.20-2ubuntu4'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-click' changed from 'absent' to '6.2-2ubuntu1'
'python-oslo-db' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-ldap' changed from 'absent' to '3.0.0-1~u16.04+mcp1'
'python-sphinx' changed from 'absent' to '1.6.4-2~u16.04+mcp3'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'python-scrypt' changed from 'absent' to '0.8.0-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-2~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.14'
'python2.7-testscenarios' changed from 'absent' to '1'
'python-werkzeug' changed from 'absent' to '0.14.1+dfsg1-1~u16.04+mcp'
'python-editor' changed from 'absent' to '0.4-2'
'pycadf-common' changed from 'absent' to '2.7.0-1~u16.04+mcp5'
'python-pastescript' changed from 'absent' to '2.0.2-2~u16.04+mcp'
'python-tenacity' changed from 'absent' to '4.12.0-1~u16.04+mcp'
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.14'
'python-webob' changed from 'absent' to '1:1.8.2-1~u16.04+mcp'
'python-bcrypt' changed from 'absent' to '3.1.3-1~u16.04+mcp3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'keystone-common' changed from 'absent' to '2:14.1.0-1~u16.04+mcp56'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python-keystone' changed from 'absent' to '2:14.1.0-1~u16.04+mcp56'
'python-aniso8601' changed from 'absent' to '0.83-1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.14'
'python-oslo.policy' changed from 'absent' to '1.38.1-1~u16.04+mcp7'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python-flask' changed from 'absent' to '1.0.2-1~u16.04+mcp'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python2.7-greenlet' changed from 'absent' to '1'
'python-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-itsdangerous' changed from 'absent' to '0.24+dfsg1-1'
'python-alabaster' changed from 'absent' to '0.7.7-1'
'python-flask-restful' changed from 'absent' to '0.3.5-1~u16.04+mcp0'
'python-oslo.db' changed from 'absent' to '4.40.2-1~u16.04+mcp5'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'python-testresources' changed from 'absent' to '2.0.0-1.0~u16.04+mcp1'
'python-eventlet' changed from 'absent' to '0.20.0-5~u16.04+mcp0'
'python-typing' changed from 'absent' to '3.6.2-1~u16.04+mcp2'
'python2.7-ldap' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-amqp' changed from 'absent' to '2.3.2-1~u16.04+mcp2'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp7'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'python-repoze.who' changed from 'absent' to '2.2-3'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python2.7-testtools' changed from 'absent' to '1'
'python-osprofiler' changed from 'absent' to '2.3.0-1~u16.04+mcp'
'python-colorama' changed from 'absent' to '0.3.7-1'
'python-responses' changed from 'absent' to '0.3.0-1'
'httpd-wsgi' changed from 'absent' to '1'
'python-oslo.messaging' changed from 'absent' to '8.1.3-1~u16.04+mcp17'
'keystone' changed from 'absent' to '2:14.1.0-1~u16.04+mcp56'
'python2.7-alabaster' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.36.0-1~u16.04+mcp6'
'python-pyldap' changed from 'absent' to '1'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.14'
'python-imagesize' changed from 'absent' to '0.7.1-1.1~u16.04+mcp2'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-passlib' changed from 'absent' to '1.7.1-2.1~u16.04+mcp2'
'python-greenlet' changed from 'absent' to '0.4.15-1~u16.04+mcp'
'python-sqlalchemy-ext' changed from 'absent' to '1.2.10+ds1-1~u16.04+mcp'
'python-oslo.service' changed from 'absent' to '1.31.8-1~u16.04+mcp5'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'sphinx-common' changed from 'absent' to '1.6.4-2~u16.04+mcp3'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python2.7-keystone' changed from 'absent' to '1'
'python-sqlalchemy' changed from 'absent' to '1.2.10+ds1-1~u16.04+mcp'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-keystonemiddleware' changed from 'absent' to '5.2.0-2~u16.04+mcp10'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'python-pysaml2' changed from 'absent' to '4.5.0-1~u16.04+mcp'
'python-zope' changed from 'absent' to '1'
'python-oslo.cache' changed from 'absent' to '1.30.4-1~u16.04+mcp10'
'httpd-cgi' changed from 'absent' to '1'
'ssl-cert' changed from 'absent' to '1.0.37'
'python-future' changed from 'absent' to '0.15.2-1'

2019-11-21 06:28:11,377 [salt.state       :915 ][INFO    ][22473] Loading fresh modules for state activity
2019-11-21 06:28:11,417 [salt.state       :1951][INFO    ][22473] Completed state [keystone] at time 06:28:11.417277 duration_in_ms=40062.186
2019-11-21 06:28:11,422 [salt.state       :1780][INFO    ][22473] Running state [python-psycopg2] at time 06:28:11.422815
2019-11-21 06:28:11,423 [salt.state       :1813][INFO    ][22473] Executing state pkg.installed for [python-psycopg2]
2019-11-21 06:28:12,380 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:28:12,415 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-psycopg2'] in directory '/root'
2019-11-21 06:28:15,666 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:28:15,719 [salt.state       :300 ][INFO    ][22473] Made the following changes:
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'libpq5' changed from 'absent' to '9.5.19-0ubuntu0.16.04.1'

2019-11-21 06:28:15,746 [salt.state       :915 ][INFO    ][22473] Loading fresh modules for state activity
2019-11-21 06:28:15,792 [salt.state       :1951][INFO    ][22473] Completed state [python-psycopg2] at time 06:28:15.792810 duration_in_ms=4369.994
2019-11-21 06:28:15,799 [salt.state       :1780][INFO    ][22473] Running state [python-mysqldb] at time 06:28:15.799752
2019-11-21 06:28:15,800 [salt.state       :1813][INFO    ][22473] Executing state pkg.installed for [python-mysqldb]
2019-11-21 06:28:16,572 [salt.state       :300 ][INFO    ][22473] All specified packages are already installed
2019-11-21 06:28:16,573 [salt.state       :1951][INFO    ][22473] Completed state [python-mysqldb] at time 06:28:16.572960 duration_in_ms=773.208
2019-11-21 06:28:16,573 [salt.state       :1780][INFO    ][22473] Running state [python-openstackclient] at time 06:28:16.573468
2019-11-21 06:28:16,573 [salt.state       :1813][INFO    ][22473] Executing state pkg.installed for [python-openstackclient]
2019-11-21 06:28:16,583 [salt.state       :300 ][INFO    ][22473] All specified packages are already installed
2019-11-21 06:28:16,583 [salt.state       :1951][INFO    ][22473] Completed state [python-openstackclient] at time 06:28:16.583763 duration_in_ms=10.295
2019-11-21 06:28:16,584 [salt.state       :1780][INFO    ][22473] Running state [python-tornado] at time 06:28:16.584193
2019-11-21 06:28:16,584 [salt.state       :1813][INFO    ][22473] Executing state pkg.installed for [python-tornado]
2019-11-21 06:28:16,593 [salt.state       :300 ][INFO    ][22473] All specified packages are already installed
2019-11-21 06:28:16,593 [salt.state       :1951][INFO    ][22473] Completed state [python-tornado] at time 06:28:16.593853 duration_in_ms=9.66
2019-11-21 06:28:16,594 [salt.state       :1780][INFO    ][22473] Running state [apache2] at time 06:28:16.594674
2019-11-21 06:28:16,595 [salt.state       :1813][INFO    ][22473] Executing state pkg.installed for [apache2]
2019-11-21 06:28:16,604 [salt.state       :300 ][INFO    ][22473] All specified packages are already installed
2019-11-21 06:28:16,604 [salt.state       :1951][INFO    ][22473] Completed state [apache2] at time 06:28:16.604437 duration_in_ms=9.763
2019-11-21 06:28:16,605 [salt.state       :1780][INFO    ][22473] Running state [openssl] at time 06:28:16.605166
2019-11-21 06:28:16,605 [salt.state       :1813][INFO    ][22473] Executing state pkg.installed for [openssl]
2019-11-21 06:28:16,615 [salt.state       :300 ][INFO    ][22473] All specified packages are already installed
2019-11-21 06:28:16,615 [salt.state       :1951][INFO    ][22473] Completed state [openssl] at time 06:28:16.615709 duration_in_ms=10.543
2019-11-21 06:28:16,617 [salt.state       :1780][INFO    ][22473] Running state [a2enmod ssl] at time 06:28:16.617185
2019-11-21 06:28:16,617 [salt.state       :1813][INFO    ][22473] Executing state cmd.run for [a2enmod ssl]
2019-11-21 06:28:16,618 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command 'a2enmod ssl' in directory '/root'
2019-11-21 06:28:16,687 [salt.state       :300 ][INFO    ][22473] {'pid': 25908, 'retcode': 0, 'stderr': '', 'stdout': 'Considering dependency setenvif for ssl:\nModule setenvif already enabled\nConsidering dependency mime for ssl:\nModule mime already enabled\nConsidering dependency socache_shmcb for ssl:\nEnabling module socache_shmcb.\nEnabling module ssl.\nSee /usr/share/doc/apache2/README.Debian.gz on how to configure SSL and create self-signed certificates.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-11-21 06:28:16,688 [salt.state       :1951][INFO    ][22473] Completed state [a2enmod ssl] at time 06:28:16.688420 duration_in_ms=71.234
2019-11-21 06:28:16,690 [salt.state       :1780][INFO    ][22473] Running state [a2enmod rewrite] at time 06:28:16.690054
2019-11-21 06:28:16,690 [salt.state       :1813][INFO    ][22473] Executing state cmd.run for [a2enmod rewrite]
2019-11-21 06:28:16,692 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command 'a2enmod rewrite' in directory '/root'
2019-11-21 06:28:16,761 [salt.state       :300 ][INFO    ][22473] {'pid': 25921, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-11-21 06:28:16,762 [salt.state       :1951][INFO    ][22473] Completed state [a2enmod rewrite] at time 06:28:16.761950 duration_in_ms=71.895
2019-11-21 06:28:16,763 [salt.state       :1780][INFO    ][22473] Running state [libapache2-mod-wsgi] at time 06:28:16.763702
2019-11-21 06:28:16,764 [salt.state       :1813][INFO    ][22473] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-11-21 06:28:16,775 [salt.state       :300 ][INFO    ][22473] All specified packages are already installed
2019-11-21 06:28:16,775 [salt.state       :1951][INFO    ][22473] Completed state [libapache2-mod-wsgi] at time 06:28:16.775753 duration_in_ms=12.051
2019-11-21 06:28:16,776 [salt.state       :1780][INFO    ][22473] Running state [a2enmod wsgi] at time 06:28:16.776565
2019-11-21 06:28:16,777 [salt.state       :1813][INFO    ][22473] Executing state cmd.run for [a2enmod wsgi]
2019-11-21 06:28:16,777 [salt.state       :300 ][INFO    ][22473] /etc/apache2/mods-enabled/wsgi.load exists
2019-11-21 06:28:16,778 [salt.state       :1951][INFO    ][22473] Completed state [a2enmod wsgi] at time 06:28:16.778005 duration_in_ms=1.44
2019-11-21 06:28:16,778 [salt.state       :1780][INFO    ][22473] Running state [a2enmod status -q] at time 06:28:16.778826
2019-11-21 06:28:16,779 [salt.state       :1813][INFO    ][22473] Executing state cmd.run for [a2enmod status -q]
2019-11-21 06:28:16,779 [salt.state       :300 ][INFO    ][22473] /etc/apache2/mods-enabled/status.load exists
2019-11-21 06:28:16,780 [salt.state       :1951][INFO    ][22473] Completed state [a2enmod status -q] at time 06:28:16.780159 duration_in_ms=1.333
2019-11-21 06:28:16,783 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:28:16.783249
2019-11-21 06:28:16,783 [salt.state       :1813][INFO    ][22473] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-11-21 06:28:16,784 [salt.state       :300 ][INFO    ][22473] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-11-21 06:28:16,784 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:28:16.784607 duration_in_ms=1.358
2019-11-21 06:28:16,785 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:28:16.785040
2019-11-21 06:28:16,785 [salt.state       :1813][INFO    ][22473] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-11-21 06:28:16,785 [salt.state       :300 ][INFO    ][22473] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-11-21 06:28:16,786 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:28:16.786325 duration_in_ms=1.284
2019-11-21 06:28:16,786 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:28:16.786732
2019-11-21 06:28:16,787 [salt.state       :1813][INFO    ][22473] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-11-21 06:28:16,787 [salt.state       :300 ][INFO    ][22473] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-11-21 06:28:16,788 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:28:16.787982 duration_in_ms=1.25
2019-11-21 06:28:16,788 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:28:16.788424
2019-11-21 06:28:16,788 [salt.state       :1813][INFO    ][22473] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-11-21 06:28:16,789 [salt.state       :300 ][INFO    ][22473] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-11-21 06:28:16,789 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:28:16.789696 duration_in_ms=1.272
2019-11-21 06:28:16,792 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 06:28:16.792601
2019-11-21 06:28:16,793 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-11-21 06:28:16,825 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_event.conf'
2019-11-21 06:28:16,888 [salt.state       :300 ][INFO    ][22473] File changed:
--- 
+++ 
@@ -5,14 +5,15 @@
 # ThreadsPerChild: constant number of worker threads in each server process
 # MaxRequestWorkers: maximum number of worker threads
 # MaxConnectionsPerChild: maximum number of requests a server process serves
+
 <IfModule mpm_event_module>
-	StartServers			 2
-	MinSpareThreads		 25
-	MaxSpareThreads		 75
-	ThreadLimit			 64
-	ThreadsPerChild		 25
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareThreads         25
+    MaxSpareThreads         75
+    ThreadLimit             64
+    ThreadsPerChild         25
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2019-11-21 06:28:16,889 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 06:28:16.889500 duration_in_ms=96.898
2019-11-21 06:28:16,890 [salt.state       :1780][INFO    ][22473] Running state [a2enmod mpm_event] at time 06:28:16.890763
2019-11-21 06:28:16,891 [salt.state       :1813][INFO    ][22473] Executing state cmd.run for [a2enmod mpm_event]
2019-11-21 06:28:16,891 [salt.state       :300 ][INFO    ][22473] /etc/apache2/mods-enabled/mpm_event.load exists
2019-11-21 06:28:16,891 [salt.state       :1951][INFO    ][22473] Completed state [a2enmod mpm_event] at time 06:28:16.891548 duration_in_ms=0.785
2019-11-21 06:28:16,892 [salt.state       :1780][INFO    ][22473] Running state [apache_server_service_task] at time 06:28:16.892811
2019-11-21 06:28:16,893 [salt.state       :1813][INFO    ][22473] Executing state test.show_notification for [apache_server_service_task]
2019-11-21 06:28:16,893 [salt.state       :300 ][INFO    ][22473] Running apache.server.service
2019-11-21 06:28:16,893 [salt.state       :1951][INFO    ][22473] Completed state [apache_server_service_task] at time 06:28:16.893567 duration_in_ms=0.756
2019-11-21 06:28:16,894 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/ports.conf] at time 06:28:16.894229
2019-11-21 06:28:16,894 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/apache2/ports.conf]
2019-11-21 06:28:16,919 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2019-11-21 06:28:16,982 [salt.state       :300 ][INFO    ][22473] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2019-11-21 06:28:16,982 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/ports.conf] at time 06:28:16.982327 duration_in_ms=88.098
2019-11-21 06:28:16,982 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/conf-available/security.conf] at time 06:28:16.982920
2019-11-21 06:28:16,983 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-11-21 06:28:17,009 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2019-11-21 06:28:17,067 [salt.state       :300 ][INFO    ][22473] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2019-11-21 06:28:17,067 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/conf-available/security.conf] at time 06:28:17.067922 duration_in_ms=85.002
2019-11-21 06:28:17,085 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/sites-enabled/keystone.conf] at time 06:28:17.085349
2019-11-21 06:28:17,085 [salt.state       :1813][INFO    ][22473] Executing state file.absent for [/etc/apache2/sites-enabled/keystone.conf]
2019-11-21 06:28:17,085 [salt.state       :300 ][INFO    ][22473] {'removed': '/etc/apache2/sites-enabled/keystone.conf'}
2019-11-21 06:28:17,086 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/sites-enabled/keystone.conf] at time 06:28:17.086159 duration_in_ms=0.81
2019-11-21 06:28:17,086 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/sites-enabled/wsgi-keystone.conf] at time 06:28:17.086382
2019-11-21 06:28:17,086 [salt.state       :1813][INFO    ][22473] Executing state file.absent for [/etc/apache2/sites-enabled/wsgi-keystone.conf]
2019-11-21 06:28:17,086 [salt.state       :300 ][INFO    ][22473] File /etc/apache2/sites-enabled/wsgi-keystone.conf is not present
2019-11-21 06:28:17,087 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/sites-enabled/wsgi-keystone.conf] at time 06:28:17.087092 duration_in_ms=0.71
2019-11-21 06:28:17,088 [salt.state       :1780][INFO    ][22473] Running state [keystone_ssl_mysql] at time 06:28:17.088769
2019-11-21 06:28:17,089 [salt.state       :1813][INFO    ][22473] Executing state test.show_notification for [keystone_ssl_mysql]
2019-11-21 06:28:17,089 [salt.state       :300 ][INFO    ][22473] Running keystone._ssl.mysql
2019-11-21 06:28:17,089 [salt.state       :1951][INFO    ][22473] Completed state [keystone_ssl_mysql] at time 06:28:17.089478 duration_in_ms=0.71
2019-11-21 06:28:17,090 [salt.state       :1780][INFO    ][22473] Running state [keystone_ssl_rabbitmq] at time 06:28:17.090226
2019-11-21 06:28:17,090 [salt.state       :1813][INFO    ][22473] Executing state test.show_notification for [keystone_ssl_rabbitmq]
2019-11-21 06:28:17,090 [salt.state       :300 ][INFO    ][22473] Running keystone._ssl.rabbitmq
2019-11-21 06:28:17,090 [salt.state       :1951][INFO    ][22473] Completed state [keystone_ssl_rabbitmq] at time 06:28:17.090893 duration_in_ms=0.667
2019-11-21 06:28:17,091 [salt.state       :1780][INFO    ][22473] Running state [/etc/keystone/keystone.conf] at time 06:28:17.091850
2019-11-21 06:28:17,092 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/keystone/keystone.conf]
2019-11-21 06:28:17,114 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'keystone/files/rocky/keystone.conf.Debian'
2019-11-21 06:28:17,243 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_log.conf'
2019-11-21 06:28:17,272 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_default.conf'
2019-11-21 06:28:17,312 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_cache.conf'
2019-11-21 06:28:17,343 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_notifications.conf'
2019-11-21 06:28:17,363 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_rabbit.conf'
2019-11-21 06:28:17,398 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_database.conf'
2019-11-21 06:28:17,426 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_cors.conf'
2019-11-21 06:28:17,444 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_middleware.conf'
2019-11-21 06:28:17,463 [salt.state       :300 ][INFO    ][22473] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-log_dir = /var/log/keystone
 
 #
 # From keystone
@@ -134,7 +134,7 @@
 # Possible values:
 # basic - <No description provided>
 # cadf - <No description provided>
-#notification_format = cadf
+notification_format = basic
 
 # You can reduce the number of notifications keystone emits by explicitly
 # opting out. Keystone will not emit notifications that match the patterns
@@ -148,7 +148,6 @@
 #notification_opt_out = identity.authenticate.success
 #notification_opt_out = identity.authenticate.pending
 #notification_opt_out = identity.authenticate.failed
-
 #
 # From oslo.log
 #
@@ -312,6 +311,7 @@
 # exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
+
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
@@ -439,6 +439,7 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -450,6 +451,7 @@
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
 #control_exchange = keystone
+
 
 
 [application_credential]
@@ -494,6 +496,7 @@
 # A list of role names which are prohibited from being an implied role. (list
 # value)
 #prohibited_implied_role = admin
+driver = sql
 
 
 [auth]
@@ -508,6 +511,8 @@
 # are being invoked to validate attributes in the request environment, it can
 # cause conflicts. (list value)
 #methods = external,password,token,oauth1,mapped,application_credential
+
+methods = password,token
 
 # Entry point for the password auth plugin module in the
 # `keystone.auth.password` namespace. You do not need to set this unless you
@@ -549,88 +554,6 @@
 #application_credential = <None>
 
 
-[cache]
-
-#
-# From oslo.cache
-#
-
-# Prefix for building the configuration dictionary for the cache region. This
-# should not need to be changed unless there is another dogpile.cache region
-# with the same configuration name. (string value)
-#config_prefix = cache.oslo
-
-# Default TTL, in seconds, for any cached item in the dogpile.cache region.
-# This applies to any cached method that doesn't have an explicit cache
-# expiration time defined for it. (integer value)
-#expiration_time = 600
-
-# Cache backend module. For eventlet-based or environments with hundreds of
-# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
-# recommended. For environments with less than 100 threaded servers, Memcached
-# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
-# environments with a single instance of the server can use the
-# dogpile.cache.memory backend. (string value)
-# Possible values:
-# oslo_cache.memcache_pool - <No description provided>
-# oslo_cache.dict - <No description provided>
-# oslo_cache.mongo - <No description provided>
-# oslo_cache.etcd3gw - <No description provided>
-# dogpile.cache.memcached - <No description provided>
-# dogpile.cache.pylibmc - <No description provided>
-# dogpile.cache.bmemcached - <No description provided>
-# dogpile.cache.dbm - <No description provided>
-# dogpile.cache.redis - <No description provided>
-# dogpile.cache.memory - <No description provided>
-# dogpile.cache.memory_pickle - <No description provided>
-# dogpile.cache.null - <No description provided>
-#backend = dogpile.cache.null
-
-# Arguments supplied to the backend module. Specify this option once per
-# argument to be passed to the dogpile.cache backend. Example format:
-# "<argname>:<value>". (multi valued)
-#backend_argument =
-
-# Proxy classes to import that will affect the way the dogpile.cache backend
-# functions. See the dogpile.cache documentation on changing-backend-behavior.
-# (list value)
-#proxies =
-
-# Global toggle for caching. (boolean value)
-#enabled = true
-
-# Extra debugging from the cache backend (cache keys, get/set/delete/etc
-# calls). This is only really useful if you need to see the specific cache-
-# backend get/set/delete calls with the keys/values.  Typically this should be
-# left set to false. (boolean value)
-#debug_cache_backend = false
-
-# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
-# oslo_cache.memcache_pool backends only). (list value)
-#memcache_servers = localhost:11211
-
-# Number of seconds memcached server is considered dead before it is tried
-# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
-# (integer value)
-#memcache_dead_retry = 300
-
-# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
-# oslo_cache.memcache_pool backends only). (floating point value)
-#memcache_socket_timeout = 3.0
-
-# Max total number of open connections to every memcached server.
-# (oslo_cache.memcache_pool backend only). (integer value)
-#memcache_pool_maxsize = 10
-
-# Number of seconds a connection to memcached is held unused in the pool before
-# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
-#memcache_pool_unused_timeout = 60
-
-# Number of seconds that an operation will wait to get a memcache client
-# connection. (integer value)
-#memcache_pool_connection_get_timeout = 10
-
-
 [catalog]
 
 #
@@ -639,14 +562,14 @@
 
 # Absolute path to the file used for the templated catalog backend. This option
 # is only used if the `[catalog] driver` is set to `templated`. (string value)
-#template_file = default_catalog.templates
+template_file = default_catalog.templates
 
 # Entry point for the catalog driver in the `keystone.catalog` namespace.
 # Keystone provides a `sql` option (which supports basic CRUD operations
 # through SQL), a `templated` option (which loads the catalog from a templated
 # catalog file on disk), and a `endpoint_filter.sql` option (which supports
 # arbitrary service catalogs per project). (string value)
-#driver = sql
+driver = sql
 
 # Toggle for catalog caching. This has no effect unless global caching is
 # enabled. In a typical deployment, there is no reason to disable this.
@@ -664,35 +587,6 @@
 # deployment to have enough services or endpoints to exceed a reasonable limit.
 # (integer value)
 #list_limit = <None>
-
-
-[cors]
-
-#
-# From oslo.middleware
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
 
 
 [credential]
@@ -718,123 +612,7 @@
 # of keys should be managed separately and require different rotation policies.
 # Do not share this repository with the repository used to manage keys for
 # Fernet tokens. (string value)
-#key_repository = /etc/keystone/credential-keys/
-
-
-[database]
-connection = sqlite:////var/lib/keystone/keystone.db
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
-# Deprecated group/name - [DATABASE]/idle_timeout
-# Deprecated group/name - [database]/idle_timeout
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
+key_repository = /var/lib/keystone/credential-keys
 
 
 [domain_config]
@@ -906,7 +684,7 @@
 # Reason: Support for running keystone under eventlet has been removed in the
 # Newton release. These options remain for backwards compatibility because they
 # are used for URL substitutions.
-#public_bind_host = 0.0.0.0
+#public_bind_host = 172.16.10.36
 
 # DEPRECATED: The port number for the public service to listen on. (port value)
 # Minimum value: 0
@@ -928,7 +706,7 @@
 # Reason: Support for running keystone under eventlet has been removed in the
 # Newton release. These options remain for backwards compatibility because they
 # are used for URL substitutions.
-#admin_bind_host = 0.0.0.0
+#admin_bind_host = 172.16.10.36
 
 # DEPRECATED: The port number for the admin service to listen on. (port value)
 # Minimum value: 0
@@ -943,7 +721,6 @@
 
 
 [extra_headers]
-Distribution = Ubuntu
 
 #
 # From keystone
@@ -951,7 +728,6 @@
 
 # Specifies the distribution of the keystone server. (string value)
 #Distribution = Ubuntu
-
 
 [federation]
 
@@ -998,6 +774,8 @@
 # Toggle for federation caching. This has no effect unless global caching is
 # enabled. There is typically no reason to disable this. (boolean value)
 #caching = true
+
+
 
 
 [fernet_tokens]
@@ -1027,7 +805,7 @@
 # `keystone-manage fernet_rotate` *twice* on a key repository without syncing
 # other nodes will result in tokens that can not be validated by all nodes.
 # (string value)
-#key_repository = /etc/keystone/fernet-keys/
+key_repository = /var/lib/keystone/fernet-keys
 
 # This controls how many keys are held in rotation by `keystone-manage
 # fernet_rotate` before they are discarded. The default value of 3 means that
@@ -1036,35 +814,7 @@
 # Increasing this value means that additional secondary keys will be kept in
 # the rotation. (integer value)
 # Minimum value: 1
-#max_active_keys = 3
-
-
-[healthcheck]
-
-#
-# From oslo.middleware
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
+max_active_keys = 51
 
 
 [identity]
@@ -1113,7 +863,7 @@
 # specific configuration is defined for the domain in question. Unless your
 # deployment primarily relies on `ldap` AND is not using domain-specific
 # configuration, you should typically leave this set to `sql`. (string value)
-#driver = sql
+driver = sql
 
 # Toggle for identity caching. This has no effect unless global caching is
 # enabled. There is typically no reason to disable this. (boolean value)
@@ -1499,52 +1249,6 @@
 #auth_pool_connection_lifetime = 60
 
 
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
 [memcache]
 
 #
@@ -1598,687 +1302,6 @@
 #access_token_duration = 86400
 
 
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware
-#
-
-# The maximum body size for each  request, in bytes. (integer value)
-# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
-# Deprecated group/name - [DEFAULT]/max_request_body_size
-#max_request_body_size = 114688
-
-# DEPRECATED: The HTTP Header that will be used to determine what the original
-# request protocol scheme was, even if it was hidden by a SSL termination
-# proxy. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#secure_proxy_ssl_header = X-Forwarded-Proto
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
 [policy]
 
 #
@@ -2289,127 +1312,11 @@
 # Supplied drivers are `rules` (which does not support any CRUD operations for
 # the v3 policy API) and `sql`. Typically, there is no reason to set this
 # option unless you are providing a custom entry point. (string value)
-#driver = sql
+driver = sql
 
 # Maximum number of entities that will be returned in a policy collection.
 # (integer value)
 #list_limit = <None>
-
-
-[profiler]
-
-#
-# From osprofiler
-#
-
-#
-# Enable the profiling for all services on this node.
-#
-# Default value is False (fully disable the profiling feature).
-#
-# Possible values:
-#
-# * True: Enables the feature
-# * False: Disables the feature. The profiling cannot be started via this
-# project
-#   operations. If the profiling is triggered by another project, this project
-#   part will be empty.
-#  (boolean value)
-# Deprecated group/name - [profiler]/profiler_enabled
-#enabled = false
-
-#
-# Enable SQL requests profiling in services.
-#
-# Default value is False (SQL requests won't be traced).
-#
-# Possible values:
-#
-# * True: Enables SQL requests profiling. Each SQL query will be part of the
-#   trace and can the be analyzed by how much time was spent for that.
-# * False: Disables SQL requests profiling. The spent time is only shown on a
-#   higher level of operations. Single SQL queries cannot be analyzed this way.
-#  (boolean value)
-#trace_sqlalchemy = false
-
-#
-# Secret key(s) to use for encrypting context data for performance profiling.
-#
-# This string value should have the following format:
-# <key1>[,<key2>,...<keyn>],
-# where each key is some random string. A user who triggers the profiling via
-# the REST API has to set one of these keys in the headers of the REST API call
-# to include profiling results of this node for this particular project.
-#
-# Both "enabled" flag and "hmac_keys" config options should be set to enable
-# profiling. Also, to generate correct profiling information across all
-# services
-# at least one key needs to be consistent between OpenStack projects. This
-# ensures it can be used from client side to generate the trace, containing
-# information from all possible resources.
-#  (string value)
-#hmac_keys = SECRET_KEY
-
-#
-# Connection string for a notifier backend.
-#
-# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
-#
-# Examples of possible values:
-#
-# * ``messaging://`` - use oslo_messaging driver for sending spans.
-# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
-# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
-# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
-#   spans.
-# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
-# spans.
-#  (string value)
-#connection_string = messaging://
-
-#
-# Document type for notification indexing in elasticsearch.
-#  (string value)
-#es_doc_type = notification
-
-#
-# This parameter is a time value parameter (for example: es_scroll_time=2m),
-# indicating for how long the nodes that participate in the search will
-# maintain
-# relevant resources in order to continue and support it.
-#  (string value)
-#es_scroll_time = 2m
-
-#
-# Elasticsearch splits large requests in batches. This parameter defines
-# maximum size of each batch (for example: es_scroll_size=10000).
-#  (integer value)
-#es_scroll_size = 10000
-
-#
-# Redissentinel provides a timeout option on the connections.
-# This parameter defines that timeout (for example: socket_timeout=0.1).
-#  (floating point value)
-#socket_timeout = 0.1
-
-#
-# Redissentinel uses a service name to identify a master redis service.
-# This parameter defines the name (for example:
-# ``sentinal_service_name=mymaster``).
-#  (string value)
-#sentinel_service_name = mymaster
-
-#
-# Enable filter traces that contain error/exception to a separated place.
-#
-# Default value is set to False.
-#
-# Possible values:
-#
-# * True: Enable filter traces that contain error/exception.
-# * False: Disable the filter.
-#  (boolean value)
-#filter_error_trace = false
 
 
 [resource]
@@ -2830,7 +1737,7 @@
 # impact of a compromised token. (integer value)
 # Minimum value: 0
 # Maximum value: 9223372036854775807
-#expiration = 3600
+expiration = 3600
 
 # Entry point for the token provider in the `keystone.token.provider`
 # namespace. The token provider controls the token construction, validation,
@@ -2840,9 +1747,13 @@
 # command). (string value)
 #provider = fernet
 
+provider = fernet
+
+
 # Toggle for caching token creation and validation data. This has no effect
 # unless global caching is enabled. (boolean value)
 #caching = true
+caching = false
 
 # The number of seconds to cache token creation and validation data. This has
 # no effect unless both global and `[token] caching` are enabled. (integer
@@ -2888,6 +1799,8 @@
 # the built-in expiry time. This allows long running operations to succeed.
 # Defaults to two days. (integer value)
 #allow_expired_window = 172800
+
+hash_algorithm = sha256
 
 
 [tokenless_auth]
@@ -2977,7 +1890,419 @@
 # flat - <No description provided>
 # strict_two_level - <No description provided>
 #enforcement_model = flat
-
+[cache]
+#
+# From oslo.cache
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Cache backend module. For eventlet-based or environments with hundreds of
+# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
+# recommended. For environments with less than 100 threaded servers, Memcached
+# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
+# environments with a single instance of the server can use the
+# dogpile.cache.memory backend. (string value)
+# Possible values:
+# oslo_cache.memcache_pool - <No description provided>
+# oslo_cache.dict - <No description provided>
+# oslo_cache.mongo - <No description provided>
+# oslo_cache.etcd3gw - <No description provided>
+# dogpile.cache.memcached - <No description provided>
+# dogpile.cache.pylibmc - <No description provided>
+# dogpile.cache.bmemcached - <No description provided>
+# dogpile.cache.dbm - <No description provided>
+# dogpile.cache.redis - <No description provided>
+# dogpile.cache.memory - <No description provided>
+# dogpile.cache.memory_pickle - <No description provided>
+# dogpile.cache.null - <No description provided>
+#backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+memcache_servers =localhost:11211
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry = 300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (floating point value)
+#memcache_socket_timeout = 3.0
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
+
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message which failed
+# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
+# (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Connect over SSL. (boolean value)
+# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
+#ssl = false
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+
+[oslo_policy]
+
+[database]
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = mysql+pymysql://keystone:opnfv_secret@172.16.10.36/keystone?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster (NDB).
+# (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer than this
+# number of seconds will be replaced with a new one the next time they are
+# checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The option to set the minimum pool size is not supported by
+# sqlalchemy.
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+# Optional URL parameters to append onto the connection URL at connect time;
+# specify as param1=value1&param2=value2&... (string value)
+#connection_parameters =
+
+
+[cors]
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
+
+[healthcheck]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+max_request_body_size= 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the original
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if the
+# middleware should parse the headers or not. (boolean value)
+#enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
+
+
+[profiler]
 
 [wsgi]
 

2019-11-21 06:28:17,464 [salt.state       :1951][INFO    ][22473] Completed state [/etc/keystone/keystone.conf] at time 06:28:17.464242 duration_in_ms=372.391
2019-11-21 06:28:17,465 [salt.state       :1780][INFO    ][22473] Running state [/etc/keystone/keystone-paste.ini] at time 06:28:17.465310
2019-11-21 06:28:17,465 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/keystone/keystone-paste.ini]
2019-11-21 06:28:17,481 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'keystone/files/rocky/keystone-paste.ini.Debian'
2019-11-21 06:28:17,491 [salt.state       :300 ][INFO    ][22473] File changed:
--- 
+++ 
@@ -1,8 +1,3 @@
-# !!! WARNING: THIS FILE IS NO LONGER USED. KEYSTONE IS LOADED DIRECTLY AND
-# !!!          WILL IGNORE THIS FILE. THIS FILE WILL BE REMOVED IN THE STEIN
-# !!!          RELEASE. IT IS BEING MAINTAINED TO EASE THE TRANSITION OF THE
-# !!!          DEPLOYMENT TOOLING IN THE WILD.
-
 # Keystone PasteDeploy configuration file.
 
 [filter:debug]
@@ -13,6 +8,9 @@
 
 [filter:build_auth_context]
 use = egg:keystone#build_auth_context
+
+[filter:token_auth]
+use = egg:keystone#token_auth
 
 [filter:json_body]
 use = egg:keystone#json_body
@@ -57,17 +55,17 @@
 [pipeline:public_api]
 # The last item in this pipeline must be public_service or an equivalent
 # application. It cannot be a filter.
-pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context json_body ec2_extension public_service
+pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context token_auth json_body ec2_extension public_service
 
 [pipeline:admin_api]
 # The last item in this pipeline must be admin_service or an equivalent
 # application. It cannot be a filter.
-pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context json_body ec2_extension s3_extension admin_service
+pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context token_auth json_body ec2_extension s3_extension admin_service
 
 [pipeline:api_v3]
 # The last item in this pipeline must be service_v3 or an equivalent
 # application. It cannot be a filter.
-pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context json_body ec2_extension_v3 s3_extension service_v3
+pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context token_auth json_body ec2_extension_v3 s3_extension service_v3
 
 [app:public_version_service]
 use = egg:keystone#public_version_service

2019-11-21 06:28:17,491 [salt.state       :1951][INFO    ][22473] Completed state [/etc/keystone/keystone-paste.ini] at time 06:28:17.491751 duration_in_ms=26.44
2019-11-21 06:28:17,492 [salt.state       :1780][INFO    ][22473] Running state [/etc/keystone/policy.json] at time 06:28:17.492356
2019-11-21 06:28:17,492 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/keystone/policy.json]
2019-11-21 06:28:17,492 [salt.loaded.int.states.file:2298][WARNING ][22473] State for file: /etc/keystone/policy.json - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-11-21 06:28:17,494 [salt.state       :300 ][INFO    ][22473] {'new': 'file /etc/keystone/policy.json created', 'group': 'keystone', 'mode': '0640'}
2019-11-21 06:28:17,494 [salt.state       :1951][INFO    ][22473] Completed state [/etc/keystone/policy.json] at time 06:28:17.494249 duration_in_ms=1.893
2019-11-21 06:28:17,494 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 06:28:17.494474
2019-11-21 06:28:17,494 [salt.state       :1813][INFO    ][22473] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-11-21 06:28:17,495 [salt.state       :300 ][INFO    ][22473] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2019-11-21 06:28:17,495 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 06:28:17.495200 duration_in_ms=0.726
2019-11-21 06:28:17,495 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:28:17.495804
2019-11-21 06:28:17,496 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-11-21 06:28:17,514 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2019-11-21 06:28:17,542 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2019-11-21 06:28:17,606 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2019-11-21 06:28:17,630 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2019-11-21 06:28:17,708 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2019-11-21 06:28:17,727 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2019-11-21 06:28:17,752 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2019-11-21 06:28:17,762 [salt.state       :300 ][INFO    ][22473] File changed:
New file
2019-11-21 06:28:17,763 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:28:17.762955 duration_in_ms=267.15
2019-11-21 06:28:17,763 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:28:17.763593
2019-11-21 06:28:17,763 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-11-21 06:28:17,780 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'keystone/files/apache.conf'
2019-11-21 06:28:17,835 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'keystone/files/rocky/wsgi-keystone.conf'
2019-11-21 06:28:18,053 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'apache/files/_locations.conf'
2019-11-21 06:28:18,089 [salt.state       :300 ][INFO    ][22473] File changed:
New file
2019-11-21 06:28:18,089 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:28:18.089815 duration_in_ms=326.221
2019-11-21 06:28:18,090 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:28:18.090455
2019-11-21 06:28:18,090 [salt.state       :1813][INFO    ][22473] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-11-21 06:28:18,092 [salt.state       :300 ][INFO    ][22473] {'new': '/etc/apache2/sites-enabled/keystone_wsgi.conf'}
2019-11-21 06:28:18,092 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:28:18.092314 duration_in_ms=1.859
2019-11-21 06:28:18,092 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:28:18.092919
2019-11-21 06:28:18,093 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-11-21 06:28:18,299 [salt.state       :300 ][INFO    ][22473] File changed:
New file
2019-11-21 06:28:18,299 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:28:18.299636 duration_in_ms=206.717
2019-11-21 06:28:18,300 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:28:18.300257
2019-11-21 06:28:18,300 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/apache2/sites-available/wsgi_openstack_web.conf]
2019-11-21 06:28:18,504 [salt.state       :300 ][INFO    ][22473] File changed:
New file
2019-11-21 06:28:18,504 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:28:18.504769 duration_in_ms=204.511
2019-11-21 06:28:18,505 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:28:18.505435
2019-11-21 06:28:18,505 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-11-21 06:28:18,709 [salt.state       :300 ][INFO    ][22473] File changed:
New file
2019-11-21 06:28:18,710 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:28:18.710164 duration_in_ms=204.728
2019-11-21 06:28:18,710 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:28:18.710793
2019-11-21 06:28:18,711 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-11-21 06:28:18,912 [salt.state       :300 ][INFO    ][22473] File changed:
New file
2019-11-21 06:28:18,912 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:28:18.912943 duration_in_ms=202.15
2019-11-21 06:28:18,919 [salt.state       :1780][INFO    ][22473] Running state [apache2] at time 06:28:18.919039
2019-11-21 06:28:18,919 [salt.state       :1813][INFO    ][22473] Executing state service.running for [apache2]
2019-11-21 06:28:18,919 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-11-21 06:28:18,939 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:28:18,960 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:28:18,986 [salt.state       :300 ][INFO    ][22473] The service apache2 is already running
2019-11-21 06:28:18,987 [salt.state       :1951][INFO    ][22473] Completed state [apache2] at time 06:28:18.987092 duration_in_ms=68.052
2019-11-21 06:28:18,987 [salt.state       :1780][INFO    ][22473] Running state [apache2] at time 06:28:18.987576
2019-11-21 06:28:18,988 [salt.state       :1813][INFO    ][22473] Executing state service.mod_watch for [apache2]
2019-11-21 06:28:18,989 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:28:19,010 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2019-11-21 06:28:19,175 [salt.state       :300 ][INFO    ][22473] {'apache2': True}
2019-11-21 06:28:19,175 [salt.state       :1951][INFO    ][22473] Completed state [apache2] at time 06:28:19.175917 duration_in_ms=188.342
2019-11-21 06:28:19,177 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/conf-enabled/security.conf] at time 06:28:19.177317
2019-11-21 06:28:19,177 [salt.state       :1813][INFO    ][22473] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-11-21 06:28:19,179 [salt.state       :300 ][INFO    ][22473] {'new': '/etc/apache2/conf-enabled/security.conf'}
2019-11-21 06:28:19,179 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/conf-enabled/security.conf] at time 06:28:19.179741 duration_in_ms=2.424
2019-11-21 06:28:19,180 [salt.state       :1780][INFO    ][22473] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:28:19.180025
2019-11-21 06:28:19,180 [salt.state       :1813][INFO    ][22473] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-11-21 06:28:19,180 [salt.state       :300 ][INFO    ][22473] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-11-21 06:28:19,180 [salt.state       :1951][INFO    ][22473] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:28:19.180829 duration_in_ms=0.804
2019-11-21 06:28:19,181 [salt.state       :1780][INFO    ][22473] Running state [keystone-manage db_sync && sleep 1] at time 06:28:19.181879
2019-11-21 06:28:19,182 [salt.state       :1813][INFO    ][22473] Executing state cmd.run for [keystone-manage db_sync && sleep 1]
2019-11-21 06:28:19,182 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command 'keystone-manage db_sync && sleep 1' as user 'keystone' in directory '/var/lib/keystone'
2019-11-21 06:28:28,200 [salt.state       :300 ][INFO    ][22473] {'pid': 26021, 'retcode': 0, 'stderr': '', 'stdout': '2019-11-21 06:28:21.161 26026 INFO migrate.versioning.api [-] 66 -> 67... \x1b[00m\n2019-11-21 06:28:21.839 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:21.839 26026 INFO migrate.versioning.api [-] 67 -> 68... \x1b[00m\n2019-11-21 06:28:21.844 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:21.844 26026 INFO migrate.versioning.api [-] 68 -> 69... \x1b[00m\n2019-11-21 06:28:21.849 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:21.849 26026 INFO migrate.versioning.api [-] 69 -> 70... \x1b[00m\n2019-11-21 06:28:21.854 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:21.854 26026 INFO migrate.versioning.api [-] 70 -> 71... \x1b[00m\n2019-11-21 06:28:21.859 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:21.859 26026 INFO migrate.versioning.api [-] 71 -> 72... \x1b[00m\n2019-11-21 06:28:21.864 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:21.864 26026 INFO migrate.versioning.api [-] 72 -> 73... \x1b[00m\n2019-11-21 06:28:21.951 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:21.951 26026 INFO migrate.versioning.api [-] 73 -> 74... \x1b[00m\n2019-11-21 06:28:22.016 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.016 26026 INFO migrate.versioning.api [-] 74 -> 75... \x1b[00m\n2019-11-21 06:28:22.052 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.052 26026 INFO migrate.versioning.api [-] 75 -> 76... \x1b[00m\n2019-11-21 06:28:22.059 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.059 26026 INFO migrate.versioning.api [-] 76 -> 77... \x1b[00m\n2019-11-21 06:28:22.064 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.064 26026 INFO migrate.versioning.api [-] 77 -> 78... \x1b[00m\n2019-11-21 06:28:22.069 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.069 26026 INFO migrate.versioning.api [-] 78 -> 79... \x1b[00m\n2019-11-21 06:28:22.074 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.074 26026 INFO migrate.versioning.api [-] 79 -> 80... \x1b[00m\n2019-11-21 06:28:22.079 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.079 26026 INFO migrate.versioning.api [-] 80 -> 81... \x1b[00m\n2019-11-21 06:28:22.128 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.128 26026 INFO migrate.versioning.api [-] 81 -> 82... \x1b[00m\n2019-11-21 06:28:22.421 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.421 26026 INFO migrate.versioning.api [-] 82 -> 83... \x1b[00m\n2019-11-21 06:28:22.581 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.581 26026 INFO migrate.versioning.api [-] 83 -> 84... \x1b[00m\n2019-11-21 06:28:22.639 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.639 26026 INFO migrate.versioning.api [-] 84 -> 85... \x1b[00m\n2019-11-21 06:28:22.734 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.735 26026 INFO migrate.versioning.api [-] 85 -> 86... \x1b[00m\n2019-11-21 06:28:22.768 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.768 26026 INFO migrate.versioning.api [-] 86 -> 87... \x1b[00m\n2019-11-21 06:28:22.892 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.893 26026 INFO migrate.versioning.api [-] 87 -> 88... \x1b[00m\n2019-11-21 06:28:22.941 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.941 26026 INFO migrate.versioning.api [-] 88 -> 89... \x1b[00m\n2019-11-21 06:28:22.961 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:22.961 26026 INFO migrate.versioning.api [-] 89 -> 90... \x1b[00m\n2019-11-21 06:28:23.050 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.050 26026 INFO migrate.versioning.api [-] 90 -> 91... \x1b[00m\n2019-11-21 06:28:23.137 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.137 26026 INFO migrate.versioning.api [-] 91 -> 92... \x1b[00m\n2019-11-21 06:28:23.204 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.204 26026 INFO migrate.versioning.api [-] 92 -> 93... \x1b[00m\n2019-11-21 06:28:23.308 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.308 26026 INFO migrate.versioning.api [-] 93 -> 94... \x1b[00m\n2019-11-21 06:28:23.377 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.377 26026 INFO migrate.versioning.api [-] 94 -> 95... \x1b[00m\n2019-11-21 06:28:23.432 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.433 26026 INFO migrate.versioning.api [-] 95 -> 96... \x1b[00m\n2019-11-21 06:28:23.440 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.441 26026 INFO migrate.versioning.api [-] 96 -> 97... \x1b[00m\n2019-11-21 06:28:23.449 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.449 26026 INFO migrate.versioning.api [-] 97 -> 98... \x1b[00m\n2019-11-21 06:28:23.455 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.455 26026 INFO migrate.versioning.api [-] 98 -> 99... \x1b[00m\n2019-11-21 06:28:23.461 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.461 26026 INFO migrate.versioning.api [-] 99 -> 100... \x1b[00m\n2019-11-21 06:28:23.467 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.467 26026 INFO migrate.versioning.api [-] 100 -> 101... \x1b[00m\n2019-11-21 06:28:23.475 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.475 26026 INFO migrate.versioning.api [-] 101 -> 102... \x1b[00m\n2019-11-21 06:28:23.489 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.489 26026 INFO migrate.versioning.api [-] 102 -> 103... \x1b[00m\n2019-11-21 06:28:23.510 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.511 26026 INFO migrate.versioning.api [-] 103 -> 104... \x1b[00m\n2019-11-21 06:28:23.519 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.519 26026 INFO migrate.versioning.api [-] 104 -> 105... \x1b[00m\n2019-11-21 06:28:23.581 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.581 26026 INFO migrate.versioning.api [-] 105 -> 106... \x1b[00m\n2019-11-21 06:28:23.611 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.611 26026 INFO migrate.versioning.api [-] 106 -> 107... \x1b[00m\n2019-11-21 06:28:23.646 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.646 26026 INFO migrate.versioning.api [-] 107 -> 108... \x1b[00m\n2019-11-21 06:28:23.693 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.693 26026 INFO migrate.versioning.api [-] 108 -> 109... \x1b[00m\n2019-11-21 06:28:23.727 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.772 26026 INFO migrate.versioning.api [-] 0 -> 1... \x1b[00m\n2019-11-21 06:28:23.778 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.778 26026 INFO migrate.versioning.api [-] 1 -> 2... \x1b[00m\n2019-11-21 06:28:23.784 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.785 26026 INFO migrate.versioning.api [-] 2 -> 3... \x1b[00m\n2019-11-21 06:28:23.872 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.873 26026 INFO migrate.versioning.api [-] 3 -> 4... \x1b[00m\n2019-11-21 06:28:23.878 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.878 26026 INFO migrate.versioning.api [-] 4 -> 5... \x1b[00m\n2019-11-21 06:28:23.884 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.884 26026 INFO migrate.versioning.api [-] 5 -> 6... \x1b[00m\n2019-11-21 06:28:23.890 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.890 26026 INFO migrate.versioning.api [-] 6 -> 7... \x1b[00m\n2019-11-21 06:28:23.896 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.896 26026 INFO migrate.versioning.api [-] 7 -> 8... \x1b[00m\n2019-11-21 06:28:23.901 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.902 26026 INFO migrate.versioning.api [-] 8 -> 9... \x1b[00m\n2019-11-21 06:28:23.907 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.907 26026 INFO migrate.versioning.api [-] 9 -> 10... \x1b[00m\n2019-11-21 06:28:23.965 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.965 26026 INFO migrate.versioning.api [-] 10 -> 11... \x1b[00m\n2019-11-21 06:28:23.970 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:23.970 26026 INFO migrate.versioning.api [-] 11 -> 12... \x1b[00m\n2019-11-21 06:28:24.062 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.062 26026 INFO migrate.versioning.api [-] 12 -> 13... \x1b[00m\n2019-11-21 06:28:24.067 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.067 26026 INFO migrate.versioning.api [-] 13 -> 14... \x1b[00m\n2019-11-21 06:28:24.150 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.151 26026 INFO migrate.versioning.api [-] 14 -> 15... \x1b[00m\n2019-11-21 06:28:24.156 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.156 26026 INFO migrate.versioning.api [-] 15 -> 16... \x1b[00m\n2019-11-21 06:28:24.191 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.191 26026 INFO migrate.versioning.api [-] 16 -> 17... \x1b[00m\n2019-11-21 06:28:24.196 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.196 26026 INFO migrate.versioning.api [-] 17 -> 18... \x1b[00m\n2019-11-21 06:28:24.202 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.203 26026 INFO migrate.versioning.api [-] 18 -> 19... \x1b[00m\n2019-11-21 06:28:24.208 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.209 26026 INFO migrate.versioning.api [-] 19 -> 20... \x1b[00m\n2019-11-21 06:28:24.215 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.215 26026 INFO migrate.versioning.api [-] 20 -> 21... \x1b[00m\n2019-11-21 06:28:24.221 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.221 26026 INFO migrate.versioning.api [-] 21 -> 22... \x1b[00m\n2019-11-21 06:28:24.252 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.252 26026 INFO migrate.versioning.api [-] 22 -> 23... \x1b[00m\n2019-11-21 06:28:24.309 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.309 26026 INFO migrate.versioning.api [-] 23 -> 24... \x1b[00m\n2019-11-21 06:28:24.396 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.397 26026 INFO migrate.versioning.api [-] 24 -> 25... \x1b[00m\n2019-11-21 06:28:24.403 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.403 26026 INFO migrate.versioning.api [-] 25 -> 26... \x1b[00m\n2019-11-21 06:28:24.408 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.409 26026 INFO migrate.versioning.api [-] 26 -> 27... \x1b[00m\n2019-11-21 06:28:24.414 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.415 26026 INFO migrate.versioning.api [-] 27 -> 28... \x1b[00m\n2019-11-21 06:28:24.420 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.420 26026 INFO migrate.versioning.api [-] 28 -> 29... \x1b[00m\n2019-11-21 06:28:24.426 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.426 26026 INFO migrate.versioning.api [-] 29 -> 30... \x1b[00m\n2019-11-21 06:28:24.465 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.466 26026 INFO migrate.versioning.api [-] 30 -> 31... \x1b[00m\n2019-11-21 06:28:24.510 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.510 26026 INFO migrate.versioning.api [-] 31 -> 32... \x1b[00m\n2019-11-21 06:28:24.588 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.588 26026 INFO migrate.versioning.api [-] 32 -> 33... \x1b[00m\n2019-11-21 06:28:24.779 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.780 26026 INFO migrate.versioning.api [-] 33 -> 34... \x1b[00m\n2019-11-21 06:28:24.863 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.863 26026 INFO migrate.versioning.api [-] 34 -> 35... \x1b[00m\n2019-11-21 06:28:24.904 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.904 26026 INFO migrate.versioning.api [-] 35 -> 36... \x1b[00m\n2019-11-21 06:28:24.949 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.950 26026 INFO migrate.versioning.api [-] 36 -> 37... \x1b[00m\n2019-11-21 06:28:24.957 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.957 26026 INFO migrate.versioning.api [-] 37 -> 38... \x1b[00m\n2019-11-21 06:28:24.962 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.962 26026 INFO migrate.versioning.api [-] 38 -> 39... \x1b[00m\n2019-11-21 06:28:24.967 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.967 26026 INFO migrate.versioning.api [-] 39 -> 40... \x1b[00m\n2019-11-21 06:28:24.972 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.972 26026 INFO migrate.versioning.api [-] 40 -> 41... \x1b[00m\n2019-11-21 06:28:24.978 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.978 26026 INFO migrate.versioning.api [-] 41 -> 42... \x1b[00m\n2019-11-21 06:28:24.983 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.983 26026 INFO migrate.versioning.api [-] 42 -> 43... \x1b[00m\n2019-11-21 06:28:24.991 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:24.992 26026 INFO migrate.versioning.api [-] 43 -> 44... \x1b[00m\n2019-11-21 06:28:25.002 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.003 26026 INFO migrate.versioning.api [-] 44 -> 45... \x1b[00m\n2019-11-21 06:28:25.123 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.123 26026 INFO migrate.versioning.api [-] 45 -> 46... \x1b[00m\n2019-11-21 06:28:25.128 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.128 26026 INFO migrate.versioning.api [-] 46 -> 47... \x1b[00m\n2019-11-21 06:28:25.339 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.339 26026 INFO migrate.versioning.api [-] 47 -> 48... \x1b[00m\n2019-11-21 06:28:25.474 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.474 26026 INFO migrate.versioning.api [-] 48 -> 49... \x1b[00m\n2019-11-21 06:28:25.479 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.479 26026 INFO migrate.versioning.api [-] 49 -> 50... \x1b[00m\n2019-11-21 06:28:25.484 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.484 26026 INFO migrate.versioning.api [-] 50 -> 51... \x1b[00m\n2019-11-21 06:28:25.493 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.493 26026 INFO migrate.versioning.api [-] 51 -> 52... \x1b[00m\n2019-11-21 06:28:25.501 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.558 26026 INFO migrate.versioning.api [-] 0 -> 1... \x1b[00m\n2019-11-21 06:28:25.563 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.563 26026 INFO migrate.versioning.api [-] 1 -> 2... \x1b[00m\n2019-11-21 06:28:25.569 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.569 26026 INFO migrate.versioning.api [-] 2 -> 3... \x1b[00m\n2019-11-21 06:28:25.579 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.580 26026 INFO migrate.versioning.api [-] 3 -> 4... \x1b[00m\n2019-11-21 06:28:25.585 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.585 26026 INFO migrate.versioning.api [-] 4 -> 5... \x1b[00m\n2019-11-21 06:28:25.590 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.590 26026 INFO migrate.versioning.api [-] 5 -> 6... \x1b[00m\n2019-11-21 06:28:25.595 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.596 26026 INFO migrate.versioning.api [-] 6 -> 7... \x1b[00m\n2019-11-21 06:28:25.600 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.601 26026 INFO migrate.versioning.api [-] 7 -> 8... \x1b[00m\n2019-11-21 06:28:25.605 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.605 26026 INFO migrate.versioning.api [-] 8 -> 9... \x1b[00m\n2019-11-21 06:28:25.610 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.611 26026 INFO migrate.versioning.api [-] 9 -> 10... \x1b[00m\n2019-11-21 06:28:25.622 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.622 26026 INFO migrate.versioning.api [-] 10 -> 11... \x1b[00m\n2019-11-21 06:28:25.631 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.631 26026 INFO migrate.versioning.api [-] 11 -> 12... \x1b[00m\n2019-11-21 06:28:25.648 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.649 26026 INFO migrate.versioning.api [-] 12 -> 13... \x1b[00m\n2019-11-21 06:28:25.654 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.654 26026 INFO migrate.versioning.api [-] 13 -> 14... \x1b[00m\n2019-11-21 06:28:25.680 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.680 26026 INFO migrate.versioning.api [-] 14 -> 15... \x1b[00m\n2019-11-21 06:28:25.704 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.705 26026 INFO migrate.versioning.api [-] 15 -> 16... \x1b[00m\n2019-11-21 06:28:25.713 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.713 26026 INFO migrate.versioning.api [-] 16 -> 17... \x1b[00m\n2019-11-21 06:28:25.718 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.718 26026 INFO migrate.versioning.api [-] 17 -> 18... \x1b[00m\n2019-11-21 06:28:25.723 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.723 26026 INFO migrate.versioning.api [-] 18 -> 19... \x1b[00m\n2019-11-21 06:28:25.727 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.727 26026 INFO migrate.versioning.api [-] 19 -> 20... \x1b[00m\n2019-11-21 06:28:25.732 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.732 26026 INFO migrate.versioning.api [-] 20 -> 21... \x1b[00m\n2019-11-21 06:28:25.739 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.739 26026 INFO migrate.versioning.api [-] 21 -> 22... \x1b[00m\n2019-11-21 06:28:25.747 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.748 26026 INFO migrate.versioning.api [-] 22 -> 23... \x1b[00m\n2019-11-21 06:28:25.757 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.758 26026 INFO migrate.versioning.api [-] 23 -> 24... \x1b[00m\n2019-11-21 06:28:25.769 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.769 26026 INFO migrate.versioning.api [-] 24 -> 25... \x1b[00m\n2019-11-21 06:28:25.779 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.779 26026 INFO migrate.versioning.api [-] 25 -> 26... \x1b[00m\n2019-11-21 06:28:25.787 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.788 26026 INFO migrate.versioning.api [-] 26 -> 27... \x1b[00m\n2019-11-21 06:28:25.796 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.796 26026 INFO migrate.versioning.api [-] 27 -> 28... \x1b[00m\n2019-11-21 06:28:25.805 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.805 26026 INFO migrate.versioning.api [-] 28 -> 29... \x1b[00m\n2019-11-21 06:28:25.812 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.812 26026 INFO migrate.versioning.api [-] 29 -> 30... \x1b[00m\n2019-11-21 06:28:25.816 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.817 26026 INFO migrate.versioning.api [-] 30 -> 31... \x1b[00m\n2019-11-21 06:28:25.821 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.821 26026 INFO migrate.versioning.api [-] 31 -> 32... \x1b[00m\n2019-11-21 06:28:25.826 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.826 26026 INFO migrate.versioning.api [-] 32 -> 33... \x1b[00m\n2019-11-21 06:28:25.831 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.831 26026 INFO migrate.versioning.api [-] 33 -> 34... \x1b[00m\n2019-11-21 06:28:25.835 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.836 26026 INFO migrate.versioning.api [-] 34 -> 35... \x1b[00m\n2019-11-21 06:28:25.840 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.840 26026 INFO migrate.versioning.api [-] 35 -> 36... \x1b[00m\n2019-11-21 06:28:25.845 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.845 26026 INFO migrate.versioning.api [-] 36 -> 37... \x1b[00m\n2019-11-21 06:28:25.850 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.850 26026 INFO migrate.versioning.api [-] 37 -> 38... \x1b[00m\n2019-11-21 06:28:25.854 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.854 26026 INFO migrate.versioning.api [-] 38 -> 39... \x1b[00m\n2019-11-21 06:28:25.859 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.859 26026 INFO migrate.versioning.api [-] 39 -> 40... \x1b[00m\n2019-11-21 06:28:25.865 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.866 26026 INFO migrate.versioning.api [-] 40 -> 41... \x1b[00m\n2019-11-21 06:28:25.872 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.872 26026 INFO migrate.versioning.api [-] 41 -> 42... \x1b[00m\n2019-11-21 06:28:25.879 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.880 26026 INFO migrate.versioning.api [-] 42 -> 43... \x1b[00m\n2019-11-21 06:28:25.888 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.888 26026 INFO migrate.versioning.api [-] 43 -> 44... \x1b[00m\n2019-11-21 06:28:25.895 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.895 26026 INFO migrate.versioning.api [-] 44 -> 45... \x1b[00m\n2019-11-21 06:28:25.899 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.900 26026 INFO migrate.versioning.api [-] 45 -> 46... \x1b[00m\n2019-11-21 06:28:25.915 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.916 26026 INFO migrate.versioning.api [-] 46 -> 47... \x1b[00m\n2019-11-21 06:28:25.920 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.921 26026 INFO migrate.versioning.api [-] 47 -> 48... \x1b[00m\n2019-11-21 06:28:25.925 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.926 26026 INFO migrate.versioning.api [-] 48 -> 49... \x1b[00m\n2019-11-21 06:28:25.930 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.930 26026 INFO migrate.versioning.api [-] 49 -> 50... \x1b[00m\n2019-11-21 06:28:25.934 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.934 26026 INFO migrate.versioning.api [-] 50 -> 51... \x1b[00m\n2019-11-21 06:28:25.939 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.939 26026 INFO migrate.versioning.api [-] 51 -> 52... \x1b[00m\n2019-11-21 06:28:25.943 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.980 26026 INFO migrate.versioning.api [-] 0 -> 1... \x1b[00m\n2019-11-21 06:28:25.985 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:25.985 26026 INFO migrate.versioning.api [-] 1 -> 2... \x1b[00m\n2019-11-21 06:28:26.067 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.067 26026 INFO migrate.versioning.api [-] 2 -> 3... \x1b[00m\n2019-11-21 06:28:26.176 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.176 26026 INFO migrate.versioning.api [-] 3 -> 4... \x1b[00m\n2019-11-21 06:28:26.291 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.291 26026 INFO migrate.versioning.api [-] 4 -> 5... \x1b[00m\n2019-11-21 06:28:26.296 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.297 26026 INFO migrate.versioning.api [-] 5 -> 6... \x1b[00m\n2019-11-21 06:28:26.302 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.302 26026 INFO migrate.versioning.api [-] 6 -> 7... \x1b[00m\n2019-11-21 06:28:26.308 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.308 26026 INFO migrate.versioning.api [-] 7 -> 8... \x1b[00m\n2019-11-21 06:28:26.313 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.314 26026 INFO migrate.versioning.api [-] 8 -> 9... \x1b[00m\n2019-11-21 06:28:26.320 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.321 26026 INFO migrate.versioning.api [-] 9 -> 10... \x1b[00m\n2019-11-21 06:28:26.326 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.327 26026 INFO migrate.versioning.api [-] 10 -> 11... \x1b[00m\n2019-11-21 06:28:26.353 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.353 26026 INFO migrate.versioning.api [-] 11 -> 12... \x1b[00m\n2019-11-21 06:28:26.396 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.396 26026 INFO migrate.versioning.api [-] 12 -> 13... \x1b[00m\n2019-11-21 06:28:26.519 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.519 26026 INFO migrate.versioning.api [-] 13 -> 14... \x1b[00m\n2019-11-21 06:28:26.657 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.657 26026 INFO migrate.versioning.api [-] 14 -> 15... \x1b[00m\n2019-11-21 06:28:26.702 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.702 26026 INFO migrate.versioning.api [-] 15 -> 16... \x1b[00m\n2019-11-21 06:28:26.707 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.708 26026 INFO migrate.versioning.api [-] 16 -> 17... \x1b[00m\n2019-11-21 06:28:26.712 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.712 26026 INFO migrate.versioning.api [-] 17 -> 18... \x1b[00m\n2019-11-21 06:28:26.718 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.718 26026 INFO migrate.versioning.api [-] 18 -> 19... \x1b[00m\n2019-11-21 06:28:26.723 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.723 26026 INFO migrate.versioning.api [-] 19 -> 20... \x1b[00m\n2019-11-21 06:28:26.729 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.729 26026 INFO migrate.versioning.api [-] 20 -> 21... \x1b[00m\n2019-11-21 06:28:26.734 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.734 26026 INFO migrate.versioning.api [-] 21 -> 22... \x1b[00m\n2019-11-21 06:28:26.740 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.740 26026 INFO migrate.versioning.api [-] 22 -> 23... \x1b[00m\n2019-11-21 06:28:26.745 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.745 26026 INFO migrate.versioning.api [-] 23 -> 24... \x1b[00m\n2019-11-21 06:28:26.783 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.783 26026 INFO migrate.versioning.api [-] 24 -> 25... \x1b[00m\n2019-11-21 06:28:26.788 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.788 26026 INFO migrate.versioning.api [-] 25 -> 26... \x1b[00m\n2019-11-21 06:28:26.794 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.794 26026 INFO migrate.versioning.api [-] 26 -> 27... \x1b[00m\n2019-11-21 06:28:26.799 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.799 26026 INFO migrate.versioning.api [-] 27 -> 28... \x1b[00m\n2019-11-21 06:28:26.804 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.804 26026 INFO migrate.versioning.api [-] 28 -> 29... \x1b[00m\n2019-11-21 06:28:26.809 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.809 26026 INFO migrate.versioning.api [-] 29 -> 30... \x1b[00m\n2019-11-21 06:28:26.815 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.815 26026 INFO migrate.versioning.api [-] 30 -> 31... \x1b[00m\n2019-11-21 06:28:26.820 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.820 26026 INFO migrate.versioning.api [-] 31 -> 32... \x1b[00m\n2019-11-21 06:28:26.840 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.840 26026 INFO migrate.versioning.api [-] 32 -> 33... \x1b[00m\n2019-11-21 06:28:26.845 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.845 26026 INFO migrate.versioning.api [-] 33 -> 34... \x1b[00m\n2019-11-21 06:28:26.851 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.851 26026 INFO migrate.versioning.api [-] 34 -> 35... \x1b[00m\n2019-11-21 06:28:26.878 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.879 26026 INFO migrate.versioning.api [-] 35 -> 36... \x1b[00m\n2019-11-21 06:28:26.906 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.906 26026 INFO migrate.versioning.api [-] 36 -> 37... \x1b[00m\n2019-11-21 06:28:26.933 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.933 26026 INFO migrate.versioning.api [-] 37 -> 38... \x1b[00m\n2019-11-21 06:28:26.939 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.939 26026 INFO migrate.versioning.api [-] 38 -> 39... \x1b[00m\n2019-11-21 06:28:26.944 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.945 26026 INFO migrate.versioning.api [-] 39 -> 40... \x1b[00m\n2019-11-21 06:28:26.950 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.950 26026 INFO migrate.versioning.api [-] 40 -> 41... \x1b[00m\n2019-11-21 06:28:26.956 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.956 26026 INFO migrate.versioning.api [-] 41 -> 42... \x1b[00m\n2019-11-21 06:28:26.963 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.963 26026 INFO migrate.versioning.api [-] 42 -> 43... \x1b[00m\n2019-11-21 06:28:26.969 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.969 26026 INFO migrate.versioning.api [-] 43 -> 44... \x1b[00m\n2019-11-21 06:28:26.975 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.975 26026 INFO migrate.versioning.api [-] 44 -> 45... \x1b[00m\n2019-11-21 06:28:26.981 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.981 26026 INFO migrate.versioning.api [-] 45 -> 46... \x1b[00m\n2019-11-21 06:28:26.988 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:26.988 26026 INFO migrate.versioning.api [-] 46 -> 47... \x1b[00m\n2019-11-21 06:28:27.062 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:27.062 26026 INFO migrate.versioning.api [-] 47 -> 48... \x1b[00m\n2019-11-21 06:28:27.069 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:27.069 26026 INFO migrate.versioning.api [-] 48 -> 49... \x1b[00m\n2019-11-21 06:28:27.076 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:27.076 26026 INFO migrate.versioning.api [-] 49 -> 50... \x1b[00m\n2019-11-21 06:28:27.083 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:27.083 26026 INFO migrate.versioning.api [-] 50 -> 51... \x1b[00m\n2019-11-21 06:28:27.091 26026 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:28:27.091 26026 INFO migrate.versioning.api [-] 51 -> 52... \x1b[00m\n2019-11-21 06:28:27.096 26026 INFO migrate.versioning.api [-] done\x1b[00m'}
2019-11-21 06:28:28,204 [salt.state       :1951][INFO    ][22473] Completed state [keystone-manage db_sync && sleep 1] at time 06:28:28.204332 duration_in_ms=9022.45
2019-11-21 06:28:28,206 [salt.state       :1780][INFO    ][22473] Running state [keystone] at time 06:28:28.206537
2019-11-21 06:28:28,206 [salt.state       :1813][INFO    ][22473] Executing state service.dead for [keystone]
2019-11-21 06:28:28,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['systemctl', 'status', 'keystone.service', '-n', '0'] in directory '/root'
2019-11-21 06:28:28,229 [salt.state       :300 ][INFO    ][22473] The named service keystone is not available
2019-11-21 06:28:28,229 [salt.state       :1951][INFO    ][22473] Completed state [keystone] at time 06:28:28.229333 duration_in_ms=22.796
2019-11-21 06:28:28,229 [salt.state       :1780][INFO    ][22473] Running state [keystone] at time 06:28:28.229610
2019-11-21 06:28:28,229 [salt.state       :1813][INFO    ][22473] Executing state service.mod_watch for [keystone]
2019-11-21 06:28:28,230 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command ['systemctl', 'is-active', 'keystone.service'] in directory '/root'
2019-11-21 06:28:28,249 [salt.state       :300 ][INFO    ][22473] Service is already stopped
2019-11-21 06:28:28,250 [salt.state       :1951][INFO    ][22473] Completed state [keystone] at time 06:28:28.250131 duration_in_ms=20.521
2019-11-21 06:28:28,251 [salt.state       :1780][INFO    ][22473] Running state [/root/keystonerc] at time 06:28:28.251507
2019-11-21 06:28:28,252 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/root/keystonerc]
2019-11-21 06:28:28,278 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'keystone/files/keystonerc'
2019-11-21 06:28:28,336 [salt.state       :300 ][INFO    ][22473] File changed:
New file
2019-11-21 06:28:28,336 [salt.state       :1951][INFO    ][22473] Completed state [/root/keystonerc] at time 06:28:28.336448 duration_in_ms=84.941
2019-11-21 06:28:28,337 [salt.state       :1780][INFO    ][22473] Running state [/root/keystonercv3] at time 06:28:28.337170
2019-11-21 06:28:28,337 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/root/keystonercv3]
2019-11-21 06:28:28,360 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'keystone/files/keystonercv3'
2019-11-21 06:28:28,414 [salt.state       :300 ][INFO    ][22473] File changed:
New file
2019-11-21 06:28:28,414 [salt.state       :1951][INFO    ][22473] Completed state [/root/keystonercv3] at time 06:28:28.414780 duration_in_ms=77.609
2019-11-21 06:28:28,415 [salt.state       :1780][INFO    ][22473] Running state [/var/lib/keystone/fernet-keys] at time 06:28:28.415407
2019-11-21 06:28:28,415 [salt.state       :1813][INFO    ][22473] Executing state file.directory for [/var/lib/keystone/fernet-keys]
2019-11-21 06:28:28,417 [salt.state       :300 ][INFO    ][22473] {'/var/lib/keystone/fernet-keys': 'New Dir'}
2019-11-21 06:28:28,417 [salt.state       :1951][INFO    ][22473] Completed state [/var/lib/keystone/fernet-keys] at time 06:28:28.417519 duration_in_ms=2.112
2019-11-21 06:28:28,418 [salt.state       :1780][INFO    ][22473] Running state [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone] at time 06:28:28.418700
2019-11-21 06:28:28,418 [salt.state       :1813][INFO    ][22473] Executing state cmd.run for [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone]
2019-11-21 06:28:28,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command 'keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone' as user 'keystone' in directory '/var/lib/keystone'
2019-11-21 06:28:30,377 [salt.state       :300 ][INFO    ][22473] {'pid': 26241, 'retcode': 0, 'stderr': '', 'stdout': "2019-11-21 06:28:30.310 26249 INFO keystone.common.fernet_utils [-] Created a new temporary key: /var/lib/keystone/fernet-keys/0.tmp\x1b[00m\n2019-11-21 06:28:30.310 26249 INFO keystone.common.fernet_utils [-] Become a valid new key: /var/lib/keystone/fernet-keys/0\x1b[00m\n2019-11-21 06:28:30.311 26249 INFO keystone.common.fernet_utils [-] Starting key rotation with 1 key files: ['/var/lib/keystone/fernet-keys/0']\x1b[00m\n2019-11-21 06:28:30.311 26249 INFO keystone.common.fernet_utils [-] Created a new temporary key: /var/lib/keystone/fernet-keys/0.tmp\x1b[00m\n2019-11-21 06:28:30.311 26249 INFO keystone.common.fernet_utils [-] Current primary key is: 0\x1b[00m\n2019-11-21 06:28:30.312 26249 INFO keystone.common.fernet_utils [-] Next primary key will be: 1\x1b[00m\n2019-11-21 06:28:30.312 26249 INFO keystone.common.fernet_utils [-] Promoted key 0 to be the primary: 1\x1b[00m\n2019-11-21 06:28:30.312 26249 INFO keystone.common.fernet_utils [-] Become a valid new key: /var/lib/keystone/fernet-keys/0\x1b[00m"}
2019-11-21 06:28:30,378 [salt.state       :1951][INFO    ][22473] Completed state [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone] at time 06:28:30.378333 duration_in_ms=1959.633
2019-11-21 06:28:30,379 [salt.state       :1780][INFO    ][22473] Running state [/var/lib/keystone/keystone_keys_rotate.sh] at time 06:28:30.379353
2019-11-21 06:28:30,379 [salt.state       :1813][INFO    ][22473] Executing state file.managed for [/var/lib/keystone/keystone_keys_rotate.sh]
2019-11-21 06:28:30,401 [salt.fileclient  :1219][INFO    ][22473] Fetching file from saltenv 'base', ** done ** 'keystone/files/keystone_keys_rotate.sh'
2019-11-21 06:28:30,462 [salt.state       :300 ][INFO    ][22473] File changed:
New file
2019-11-21 06:28:30,462 [salt.state       :1951][INFO    ][22473] Completed state [/var/lib/keystone/keystone_keys_rotate.sh] at time 06:28:30.462394 duration_in_ms=83.04
2019-11-21 06:28:30,463 [salt.state       :1780][INFO    ][22473] Running state [/var/lib/keystone/keystone_keys_rotate.sh -s -t fernet] at time 06:28:30.463847
2019-11-21 06:28:30,464 [salt.state       :1813][INFO    ][22473] Executing state cmd.run for [/var/lib/keystone/keystone_keys_rotate.sh -s -t fernet]
2019-11-21 06:28:30,464 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command '/var/lib/keystone/keystone_keys_rotate.sh -s -t fernet' as user 'keystone' in directory '/var/lib/keystone'
2019-11-21 06:28:30,555 [salt.state       :300 ][INFO    ][22473] {'pid': 26275, 'retcode': 0, 'stderr': '', 'stdout': 'Script started at: 21_11_2019-06_28\nRunning in Fernet SYNC mode\nList of nodes is not specified, no need for sync, exiting'}
2019-11-21 06:28:30,556 [salt.state       :1951][INFO    ][22473] Completed state [/var/lib/keystone/keystone_keys_rotate.sh -s -t fernet] at time 06:28:30.556018 duration_in_ms=92.17
2019-11-21 06:28:30,557 [salt.state       :1780][INFO    ][22473] Running state [/var/lib/keystone/credential-keys] at time 06:28:30.557197
2019-11-21 06:28:30,557 [salt.state       :1813][INFO    ][22473] Executing state file.directory for [/var/lib/keystone/credential-keys]
2019-11-21 06:28:30,559 [salt.state       :300 ][INFO    ][22473] {'/var/lib/keystone/credential-keys': 'New Dir'}
2019-11-21 06:28:30,560 [salt.state       :1951][INFO    ][22473] Completed state [/var/lib/keystone/credential-keys] at time 06:28:30.560119 duration_in_ms=2.921
2019-11-21 06:28:30,561 [salt.state       :1780][INFO    ][22473] Running state [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone] at time 06:28:30.561580
2019-11-21 06:28:30,561 [salt.state       :1813][INFO    ][22473] Executing state cmd.run for [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone]
2019-11-21 06:28:30,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command 'keystone-manage credential_setup --keystone-user keystone --keystone-group keystone' as user 'keystone' in directory '/var/lib/keystone'
2019-11-21 06:28:32,487 [salt.state       :300 ][INFO    ][22473] {'pid': 26294, 'retcode': 0, 'stderr': '', 'stdout': "2019-11-21 06:28:32.420 26301 INFO keystone.common.fernet_utils [-] Created a new temporary key: /var/lib/keystone/credential-keys/0.tmp\x1b[00m\n2019-11-21 06:28:32.421 26301 INFO keystone.common.fernet_utils [-] Become a valid new key: /var/lib/keystone/credential-keys/0\x1b[00m\n2019-11-21 06:28:32.421 26301 INFO keystone.common.fernet_utils [-] Starting key rotation with 1 key files: ['/var/lib/keystone/credential-keys/0']\x1b[00m\n2019-11-21 06:28:32.422 26301 INFO keystone.common.fernet_utils [-] Created a new temporary key: /var/lib/keystone/credential-keys/0.tmp\x1b[00m\n2019-11-21 06:28:32.422 26301 INFO keystone.common.fernet_utils [-] Current primary key is: 0\x1b[00m\n2019-11-21 06:28:32.422 26301 INFO keystone.common.fernet_utils [-] Next primary key will be: 1\x1b[00m\n2019-11-21 06:28:32.422 26301 INFO keystone.common.fernet_utils [-] Promoted key 0 to be the primary: 1\x1b[00m\n2019-11-21 06:28:32.423 26301 INFO keystone.common.fernet_utils [-] Become a valid new key: /var/lib/keystone/credential-keys/0\x1b[00m"}
2019-11-21 06:28:32,488 [salt.state       :1951][INFO    ][22473] Completed state [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone] at time 06:28:32.488017 duration_in_ms=1926.437
2019-11-21 06:28:32,489 [salt.state       :1780][INFO    ][22473] Running state [/var/lib/keystone/keystone_keys_rotate.sh -s -t credential] at time 06:28:32.489711
2019-11-21 06:28:32,490 [salt.state       :1813][INFO    ][22473] Executing state cmd.run for [/var/lib/keystone/keystone_keys_rotate.sh -s -t credential]
2019-11-21 06:28:32,490 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command '/var/lib/keystone/keystone_keys_rotate.sh -s -t credential' as user 'keystone' in directory '/var/lib/keystone'
2019-11-21 06:28:32,568 [salt.state       :300 ][INFO    ][22473] {'pid': 26322, 'retcode': 0, 'stderr': '', 'stdout': 'Script started at: 21_11_2019-06_28\nRunning in Credential SYNC mode\nList of nodes is not specified, no need for sync, exiting'}
2019-11-21 06:28:32,569 [salt.state       :1951][INFO    ][22473] Completed state [/var/lib/keystone/keystone_keys_rotate.sh -s -t credential] at time 06:28:32.569406 duration_in_ms=79.695
2019-11-21 06:28:32,569 [salt.state       :1780][INFO    ][22473] Running state [keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://172.16.10.36:5000] at time 06:28:32.569786
2019-11-21 06:28:32,570 [salt.state       :1813][INFO    ][22473] Executing state cmd.run for [keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://172.16.10.36:5000]
2019-11-21 06:28:32,570 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command '. /root/keystonercv3; openstack endpoint list --service identity --interface internal -f value -c URL  |grep 5000' as user 'keystone' in directory '/var/lib/keystone'
2019-11-21 06:28:32,660 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22473] Executing command 'keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://172.16.10.36:5000' as user 'keystone' in directory '/var/lib/keystone'
2019-11-21 06:28:35,668 [salt.state       :300 ][INFO    ][22473] {'pid': 26361, 'retcode': 0, 'stderr': '', 'stdout': '2019-11-21 06:28:34.911 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Created domain default\x1b[00m\n2019-11-21 06:28:34.948 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Created project admin\x1b[00m\n2019-11-21 06:28:35.489 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Created user admin\x1b[00m\n2019-11-21 06:28:35.499 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Created role reader\x1b[00m\n2019-11-21 06:28:35.507 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Created role member\x1b[00m\n2019-11-21 06:28:35.518 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Created implied role where 2cdc1934bbea49b6b7325a0c798b46bc implies 6de527b7a3b044deb555ba845517382f\x1b[00m\n2019-11-21 06:28:35.524 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Created role admin\x1b[00m\n2019-11-21 06:28:35.533 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Created implied role where 7a79954291a54d3999aa850f8e7850ee implies 2cdc1934bbea49b6b7325a0c798b46bc\x1b[00m\n2019-11-21 06:28:35.543 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Granted admin on admin to user admin.\x1b[00m\n2019-11-21 06:28:35.549 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Granted admin on the system to user admin.\x1b[00m\n2019-11-21 06:28:35.559 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Created region RegionOne\x1b[00m\n2019-11-21 06:28:35.579 26369 INFO keystone.cmd.bootstrap [req-b781e058-ba68-4756-bc3b-df369fa28aef - - - - -] Created internal endpoint http://172.16.10.36:5000\x1b[00m'}
2019-11-21 06:28:35,669 [salt.state       :1951][INFO    ][22473] Completed state [keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://172.16.10.36:5000] at time 06:28:35.669442 duration_in_ms=3099.655
2019-11-21 06:28:35,684 [salt.minion      :1711][INFO    ][22473] Returning information for job: 20191121062722595730
2019-11-21 06:28:36,495 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command service.restart with jid 20191121062836481070
2019-11-21 06:28:36,515 [salt.minion      :1432][INFO    ][26388] Starting a new job with PID 26388
2019-11-21 06:28:37,037 [keyring.backend  :154 ][INFO    ][26388] Loading Windows (alt)
2019-11-21 06:28:37,041 [keyring.backend  :154 ][INFO    ][26388] Loading pyfs
2019-11-21 06:28:37,042 [keyring.backend  :154 ][INFO    ][26388] Loading multi
2019-11-21 06:28:37,042 [keyring.backend  :154 ][INFO    ][26388] Loading Google
2019-11-21 06:28:37,044 [keyring.backend  :154 ][INFO    ][26388] Loading Gnome
2019-11-21 06:28:37,048 [keyring.backend  :154 ][INFO    ][26388] Loading keyczar
2019-11-21 06:28:37,048 [keyring.backend  :154 ][INFO    ][26388] Loading file
2019-11-21 06:28:37,048 [keyring.backend  :154 ][INFO    ][26388] Loading kwallet
2019-11-21 06:28:37,679 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][26388] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-11-21 06:28:37,719 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][26388] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-11-21 06:28:39,974 [salt.minion      :1711][INFO    ][26388] Returning information for job: 20191121062836481070
2019-11-21 06:28:40,608 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121062840590689
2019-11-21 06:28:40,628 [salt.minion      :1432][INFO    ][26661] Starting a new job with PID 26661
2019-11-21 06:28:47,289 [salt.state       :915 ][INFO    ][26661] Loading fresh modules for state activity
2019-11-21 06:28:47,383 [salt.fileclient  :1219][INFO    ][26661] Fetching file from saltenv 'base', ** done ** 'keystone/client/init.sls'
2019-11-21 06:28:47,411 [salt.fileclient  :1219][INFO    ][26661] Fetching file from saltenv 'base', ** done ** 'keystone/client/service.sls'
2019-11-21 06:28:47,480 [salt.fileclient  :1219][INFO    ][26661] Fetching file from saltenv 'base', ** done ** 'keystone/client/project.sls'
2019-11-21 06:28:47,575 [salt.fileclient  :1219][INFO    ][26661] Fetching file from saltenv 'base', ** done ** 'keystone/client/server.sls'
2019-11-21 06:28:47,730 [salt.fileclient  :1219][INFO    ][26661] Fetching file from saltenv 'base', ** done ** 'keystone/client/os_client_config.sls'
2019-11-21 06:28:47,810 [salt.fileclient  :1219][INFO    ][26661] Fetching file from saltenv 'base', ** done ** 'keystone/client/resources/init.sls'
2019-11-21 06:28:47,855 [salt.fileclient  :1219][INFO    ][26661] Fetching file from saltenv 'base', ** done ** 'keystone/client/resources/v3.sls'
2019-11-21 06:28:48,666 [keyring.backend  :154 ][INFO    ][26661] Loading Windows (alt)
2019-11-21 06:28:48,669 [keyring.backend  :154 ][INFO    ][26661] Loading pyfs
2019-11-21 06:28:48,670 [keyring.backend  :154 ][INFO    ][26661] Loading multi
2019-11-21 06:28:48,671 [keyring.backend  :154 ][INFO    ][26661] Loading Google
2019-11-21 06:28:48,672 [keyring.backend  :154 ][INFO    ][26661] Loading Gnome
2019-11-21 06:28:48,676 [keyring.backend  :154 ][INFO    ][26661] Loading keyczar
2019-11-21 06:28:48,676 [keyring.backend  :154 ][INFO    ][26661] Loading file
2019-11-21 06:28:48,676 [keyring.backend  :154 ][INFO    ][26661] Loading kwallet
2019-11-21 06:28:49,451 [salt.state       :1780][INFO    ][26661] Running state [python-keystoneclient] at time 06:28:49.451385
2019-11-21 06:28:49,451 [salt.state       :1813][INFO    ][26661] Executing state pkg.installed for [python-keystoneclient]
2019-11-21 06:28:49,452 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26661] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:28:49,830 [salt.state       :300 ][INFO    ][26661] All specified packages are already installed
2019-11-21 06:28:49,830 [salt.state       :1951][INFO    ][26661] Completed state [python-keystoneclient] at time 06:28:49.830545 duration_in_ms=379.161
2019-11-21 06:28:49,830 [salt.state       :1780][INFO    ][26661] Running state [python-openstackclient] at time 06:28:49.830881
2019-11-21 06:28:49,831 [salt.state       :1813][INFO    ][26661] Executing state pkg.installed for [python-openstackclient]
2019-11-21 06:28:49,840 [salt.state       :300 ][INFO    ][26661] All specified packages are already installed
2019-11-21 06:28:49,840 [salt.state       :1951][INFO    ][26661] Completed state [python-openstackclient] at time 06:28:49.840310 duration_in_ms=9.428
2019-11-21 06:28:49,840 [salt.state       :1780][INFO    ][26661] Running state [python-os-client-config] at time 06:28:49.840547
2019-11-21 06:28:49,840 [salt.state       :1813][INFO    ][26661] Executing state pkg.installed for [python-os-client-config]
2019-11-21 06:28:49,850 [salt.state       :300 ][INFO    ][26661] All specified packages are already installed
2019-11-21 06:28:49,850 [salt.state       :1951][INFO    ][26661] Completed state [python-os-client-config] at time 06:28:49.850248 duration_in_ms=9.701
2019-11-21 06:28:49,853 [salt.state       :1780][INFO    ][26661] Running state [/root/.config/openstack/clouds.yml] at time 06:28:49.853467
2019-11-21 06:28:49,853 [salt.state       :1813][INFO    ][26661] Executing state file.managed for [/root/.config/openstack/clouds.yml]
2019-11-21 06:28:49,857 [salt.state       :300 ][INFO    ][26661] File changed:
New file
2019-11-21 06:28:49,858 [salt.state       :1951][INFO    ][26661] Completed state [/root/.config/openstack/clouds.yml] at time 06:28:49.858120 duration_in_ms=4.653
2019-11-21 06:28:49,859 [salt.state       :1780][INFO    ][26661] Running state [Member] at time 06:28:49.859532
2019-11-21 06:28:49,859 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.role_present for [Member]
2019-11-21 06:28:52,933 [salt.state       :300 ][INFO    ][26661] roleMember is in desired state
2019-11-21 06:28:52,934 [salt.state       :1951][INFO    ][26661] Completed state [Member] at time 06:28:52.934296 duration_in_ms=3074.762
2019-11-21 06:28:52,935 [salt.state       :1780][INFO    ][26661] Running state [heat_stack_user] at time 06:28:52.934933
2019-11-21 06:28:52,935 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.role_present for [heat_stack_user]
2019-11-21 06:28:55,632 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062855616184
2019-11-21 06:28:55,646 [salt.minion      :1432][INFO    ][26752] Starting a new job with PID 26752
2019-11-21 06:28:55,673 [salt.minion      :1711][INFO    ][26752] Returning information for job: 20191121062855616184
2019-11-21 06:28:56,416 [salt.state       :300 ][INFO    ][26661] {u'role': {u'name': u'heat_stack_user', u'domain_id': None, u'links': {u'self': u'http://172.16.10.36:5000/v3/roles/d0183fa61aa74d5fbc7f8ddb366e6646'}, u'id': u'd0183fa61aa74d5fbc7f8ddb366e6646'}}
2019-11-21 06:28:56,417 [salt.state       :1951][INFO    ][26661] Completed state [heat_stack_user] at time 06:28:56.417859 duration_in_ms=3482.927
2019-11-21 06:28:56,418 [salt.state       :1780][INFO    ][26661] Running state [admin] at time 06:28:56.418424
2019-11-21 06:28:56,418 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.role_present for [admin]
2019-11-21 06:28:56,987 [salt.state       :300 ][INFO    ][26661] roleadmin is in desired state
2019-11-21 06:28:56,988 [salt.state       :1951][INFO    ][26661] Completed state [admin] at time 06:28:56.988371 duration_in_ms=569.945
2019-11-21 06:28:56,989 [salt.state       :1780][INFO    ][26661] Running state [creator] at time 06:28:56.989527
2019-11-21 06:28:56,990 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.role_present for [creator]
2019-11-21 06:28:58,125 [salt.state       :300 ][INFO    ][26661] {u'role': {u'name': u'creator', u'domain_id': None, u'links': {u'self': u'http://172.16.10.36:5000/v3/roles/f287d7003bbc41b79363d22cad393d12'}, u'id': u'f287d7003bbc41b79363d22cad393d12'}}
2019-11-21 06:28:58,125 [salt.state       :1951][INFO    ][26661] Completed state [creator] at time 06:28:58.125267 duration_in_ms=1135.741
2019-11-21 06:28:58,125 [salt.state       :1780][INFO    ][26661] Running state [key-manager:service-admin] at time 06:28:58.125594
2019-11-21 06:28:58,125 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.role_present for [key-manager:service-admin]
2019-11-21 06:28:59,007 [salt.state       :300 ][INFO    ][26661] {u'role': {u'name': u'key-manager:service-admin', u'domain_id': None, u'links': {u'self': u'http://172.16.10.36:5000/v3/roles/0a2cbe3558bf44efbfd796ff4f017bc8'}, u'id': u'0a2cbe3558bf44efbfd796ff4f017bc8'}}
2019-11-21 06:28:59,007 [salt.state       :1951][INFO    ][26661] Completed state [key-manager:service-admin] at time 06:28:59.007569 duration_in_ms=881.974
2019-11-21 06:28:59,008 [salt.state       :1780][INFO    ][26661] Running state [heat_stack_owner] at time 06:28:59.008031
2019-11-21 06:28:59,008 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.role_present for [heat_stack_owner]
2019-11-21 06:29:00,196 [salt.state       :300 ][INFO    ][26661] {u'role': {u'name': u'heat_stack_owner', u'domain_id': None, u'links': {u'self': u'http://172.16.10.36:5000/v3/roles/474f0bc9c9744ace8d967a1188f199ec'}, u'id': u'474f0bc9c9744ace8d967a1188f199ec'}}
2019-11-21 06:29:00,197 [salt.state       :1951][INFO    ][26661] Completed state [heat_stack_owner] at time 06:29:00.197095 duration_in_ms=1189.062
2019-11-21 06:29:00,197 [salt.state       :1780][INFO    ][26661] Running state [heat-cfn] at time 06:29:00.197744
2019-11-21 06:29:00,198 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [heat-cfn]
2019-11-21 06:29:01,223 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'heat-cfn', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/3e19212c25f34e7d9f963fa7b8cbbb74'}, u'enabled': True, u'type': u'cloudformation', u'id': u'3e19212c25f34e7d9f963fa7b8cbbb74', u'description': u'OpenStack CloudFormation Service'}}
2019-11-21 06:29:01,224 [salt.state       :1951][INFO    ][26661] Completed state [heat-cfn] at time 06:29:01.223921 duration_in_ms=1026.176
2019-11-21 06:29:01,226 [salt.state       :1780][INFO    ][26661] Running state [heat-cfn_admin_v1] at time 06:29:01.226212
2019-11-21 06:29:01,226 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [heat-cfn_admin_v1]
2019-11-21 06:29:03,415 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/c4bd75e23e994e3b97d32dcde58920a9'}, u'url': u'http://172.16.10.36:8000/v1', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'3e19212c25f34e7d9f963fa7b8cbbb74', u'id': u'c4bd75e23e994e3b97d32dcde58920a9'}}
2019-11-21 06:29:03,415 [salt.state       :1951][INFO    ][26661] Completed state [heat-cfn_admin_v1] at time 06:29:03.415566 duration_in_ms=2189.353
2019-11-21 06:29:03,416 [salt.state       :1780][INFO    ][26661] Running state [heat-cfn_public_v1] at time 06:29:03.416481
2019-11-21 06:29:03,416 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [heat-cfn_public_v1]
2019-11-21 06:29:05,446 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/1de0b03ca48e4934ac92a8fb79fd40e6'}, u'url': u'http://10.16.0.107:8000/v1', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'3e19212c25f34e7d9f963fa7b8cbbb74', u'id': u'1de0b03ca48e4934ac92a8fb79fd40e6'}}
2019-11-21 06:29:05,447 [salt.state       :1951][INFO    ][26661] Completed state [heat-cfn_public_v1] at time 06:29:05.447403 duration_in_ms=2030.923
2019-11-21 06:29:05,448 [salt.state       :1780][INFO    ][26661] Running state [heat-cfn_internal_v1] at time 06:29:05.448407
2019-11-21 06:29:05,448 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [heat-cfn_internal_v1]
2019-11-21 06:29:07,633 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/e5cd09538a12446d9be414b4eeea43b4'}, u'url': u'http://172.16.10.36:8000/v1', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'3e19212c25f34e7d9f963fa7b8cbbb74', u'id': u'e5cd09538a12446d9be414b4eeea43b4'}}
2019-11-21 06:29:07,634 [salt.state       :1951][INFO    ][26661] Completed state [heat-cfn_internal_v1] at time 06:29:07.634134 duration_in_ms=2185.725
2019-11-21 06:29:07,635 [salt.state       :1780][INFO    ][26661] Running state [ceilometer] at time 06:29:07.635024
2019-11-21 06:29:07,635 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_absent for [ceilometer]
2019-11-21 06:29:08,088 [salt.state       :300 ][INFO    ][26661] service ceilometer not present
2019-11-21 06:29:08,088 [salt.state       :1951][INFO    ][26661] Completed state [ceilometer] at time 06:29:08.088918 duration_in_ms=453.894
2019-11-21 06:29:08,089 [salt.state       :1780][INFO    ][26661] Running state [ceilometer_admin] at time 06:29:08.089454
2019-11-21 06:29:08,090 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_absent for [ceilometer_admin]
2019-11-21 06:29:08,521 [salt.state       :300 ][INFO    ][26661] service ceilometer_admin not present
2019-11-21 06:29:08,521 [salt.state       :1951][INFO    ][26661] Completed state [ceilometer_admin] at time 06:29:08.521583 duration_in_ms=432.128
2019-11-21 06:29:08,522 [salt.state       :1780][INFO    ][26661] Running state [ceilometer_internal] at time 06:29:08.522053
2019-11-21 06:29:08,522 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_absent for [ceilometer_internal]
2019-11-21 06:29:08,968 [salt.state       :300 ][INFO    ][26661] service ceilometer_internal not present
2019-11-21 06:29:08,969 [salt.state       :1951][INFO    ][26661] Completed state [ceilometer_internal] at time 06:29:08.969383 duration_in_ms=447.329
2019-11-21 06:29:08,969 [salt.state       :1780][INFO    ][26661] Running state [ceilometer_public] at time 06:29:08.969859
2019-11-21 06:29:08,970 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_absent for [ceilometer_public]
2019-11-21 06:29:09,393 [salt.state       :300 ][INFO    ][26661] service ceilometer_public not present
2019-11-21 06:29:09,395 [salt.state       :1951][INFO    ][26661] Completed state [ceilometer_public] at time 06:29:09.394996 duration_in_ms=425.135
2019-11-21 06:29:09,396 [salt.state       :1780][INFO    ][26661] Running state [placement] at time 06:29:09.396061
2019-11-21 06:29:09,397 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [placement]
2019-11-21 06:29:10,430 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'placement', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/6e9bc6257e7747b2b8fd7bff44490bf4'}, u'enabled': True, u'type': u'placement', u'id': u'6e9bc6257e7747b2b8fd7bff44490bf4', u'description': u'OpenStack Placement API'}}
2019-11-21 06:29:10,430 [salt.state       :1951][INFO    ][26661] Completed state [placement] at time 06:29:10.430637 duration_in_ms=1034.576
2019-11-21 06:29:10,431 [salt.state       :1780][INFO    ][26661] Running state [nova_placement_public] at time 06:29:10.431665
2019-11-21 06:29:10,431 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [nova_placement_public]
2019-11-21 06:29:12,603 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/4a9780320cea4db783e370ff4646cd4b'}, u'url': u'http://10.16.0.107:8778', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'6e9bc6257e7747b2b8fd7bff44490bf4', u'id': u'4a9780320cea4db783e370ff4646cd4b'}}
2019-11-21 06:29:12,603 [salt.state       :1951][INFO    ][26661] Completed state [nova_placement_public] at time 06:29:12.603724 duration_in_ms=2172.059
2019-11-21 06:29:12,604 [salt.state       :1780][INFO    ][26661] Running state [nova_placement_internal] at time 06:29:12.604503
2019-11-21 06:29:12,604 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [nova_placement_internal]
2019-11-21 06:29:14,404 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/04b70942118342aeb3b3dd1111c37940'}, u'url': u'http://172.16.10.36:8778', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'6e9bc6257e7747b2b8fd7bff44490bf4', u'id': u'04b70942118342aeb3b3dd1111c37940'}}
2019-11-21 06:29:14,404 [salt.state       :1951][INFO    ][26661] Completed state [nova_placement_internal] at time 06:29:14.404330 duration_in_ms=1799.827
2019-11-21 06:29:14,405 [salt.state       :1780][INFO    ][26661] Running state [nova_placement_admin] at time 06:29:14.405207
2019-11-21 06:29:14,405 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [nova_placement_admin]
2019-11-21 06:29:16,206 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/a5cf0a83b1d24bf9bcd548d0ff620c46'}, u'url': u'http://172.16.10.36:8778', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'6e9bc6257e7747b2b8fd7bff44490bf4', u'id': u'a5cf0a83b1d24bf9bcd548d0ff620c46'}}
2019-11-21 06:29:16,206 [salt.state       :1951][INFO    ][26661] Completed state [nova_placement_admin] at time 06:29:16.206796 duration_in_ms=1801.589
2019-11-21 06:29:16,207 [salt.state       :1780][INFO    ][26661] Running state [cinderv3] at time 06:29:16.207075
2019-11-21 06:29:16,207 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [cinderv3]
2019-11-21 06:29:17,172 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'cinderv3', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/6e67d71070f24f8da54cfe8841cf4b8f'}, u'enabled': True, u'type': u'volumev3', u'id': u'6e67d71070f24f8da54cfe8841cf4b8f', u'description': u'OpenStack Volume Service V3'}}
2019-11-21 06:29:17,172 [salt.state       :1951][INFO    ][26661] Completed state [cinderv3] at time 06:29:17.172874 duration_in_ms=965.797
2019-11-21 06:29:17,174 [salt.state       :1780][INFO    ][26661] Running state [cinder_public_v3] at time 06:29:17.174217
2019-11-21 06:29:17,174 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [cinder_public_v3]
2019-11-21 06:29:19,066 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/500b4507debe4659a786327e11c85d8e'}, u'url': u'http://10.16.0.107:8776/v3/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'6e67d71070f24f8da54cfe8841cf4b8f', u'id': u'500b4507debe4659a786327e11c85d8e'}}
2019-11-21 06:29:19,066 [salt.state       :1951][INFO    ][26661] Completed state [cinder_public_v3] at time 06:29:19.066854 duration_in_ms=1892.635
2019-11-21 06:29:19,068 [salt.state       :1780][INFO    ][26661] Running state [cinder_admin_v3] at time 06:29:19.068142
2019-11-21 06:29:19,068 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [cinder_admin_v3]
2019-11-21 06:29:20,828 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/86f4c70fb42f48068f3b8a8500bd03b2'}, u'url': u'http://172.16.10.36:8776/v3/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'6e67d71070f24f8da54cfe8841cf4b8f', u'id': u'86f4c70fb42f48068f3b8a8500bd03b2'}}
2019-11-21 06:29:20,828 [salt.state       :1951][INFO    ][26661] Completed state [cinder_admin_v3] at time 06:29:20.828509 duration_in_ms=1760.367
2019-11-21 06:29:20,829 [salt.state       :1780][INFO    ][26661] Running state [cinder_internal_v3] at time 06:29:20.829585
2019-11-21 06:29:20,829 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [cinder_internal_v3]
2019-11-21 06:29:22,790 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/e3df4a93ba1e4f6b91efc70a6aa985cd'}, u'url': u'http://172.16.10.36:8776/v3/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'6e67d71070f24f8da54cfe8841cf4b8f', u'id': u'e3df4a93ba1e4f6b91efc70a6aa985cd'}}
2019-11-21 06:29:22,791 [salt.state       :1951][INFO    ][26661] Completed state [cinder_internal_v3] at time 06:29:22.791164 duration_in_ms=1961.579
2019-11-21 06:29:22,791 [salt.state       :1780][INFO    ][26661] Running state [aodh] at time 06:29:22.791540
2019-11-21 06:29:22,791 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [aodh]
2019-11-21 06:29:23,874 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'aodh', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/3d7c8fe8f14042aa9b987d7f6f678fbc'}, u'enabled': True, u'type': u'alarming', u'id': u'3d7c8fe8f14042aa9b987d7f6f678fbc', u'description': u'OpenStack Alarming Service'}}
2019-11-21 06:29:23,874 [salt.state       :1951][INFO    ][26661] Completed state [aodh] at time 06:29:23.874918 duration_in_ms=1083.377
2019-11-21 06:29:23,876 [salt.state       :1780][INFO    ][26661] Running state [aodh_public] at time 06:29:23.876385
2019-11-21 06:29:23,876 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [aodh_public]
2019-11-21 06:29:25,657 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/1fbf4356d6a44a399f1239283a90dbeb'}, u'url': u'http://10.16.0.107:8042/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'3d7c8fe8f14042aa9b987d7f6f678fbc', u'id': u'1fbf4356d6a44a399f1239283a90dbeb'}}
2019-11-21 06:29:25,657 [salt.state       :1951][INFO    ][26661] Completed state [aodh_public] at time 06:29:25.657782 duration_in_ms=1781.396
2019-11-21 06:29:25,658 [salt.state       :1780][INFO    ][26661] Running state [aodh_internal] at time 06:29:25.658932
2019-11-21 06:29:25,659 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [aodh_internal]
2019-11-21 06:29:25,681 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062925672323
2019-11-21 06:29:25,693 [salt.minion      :1432][INFO    ][26769] Starting a new job with PID 26769
2019-11-21 06:29:25,708 [salt.minion      :1711][INFO    ][26769] Returning information for job: 20191121062925672323
2019-11-21 06:29:27,774 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/c3c94f58a6c2465ea938bf195aae2b6b'}, u'url': u'http://172.16.10.36:8042/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'3d7c8fe8f14042aa9b987d7f6f678fbc', u'id': u'c3c94f58a6c2465ea938bf195aae2b6b'}}
2019-11-21 06:29:27,774 [salt.state       :1951][INFO    ][26661] Completed state [aodh_internal] at time 06:29:27.774863 duration_in_ms=2115.929
2019-11-21 06:29:27,776 [salt.state       :1780][INFO    ][26661] Running state [aodh_admin] at time 06:29:27.776452
2019-11-21 06:29:27,776 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [aodh_admin]
2019-11-21 06:29:29,776 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/b97233de7e7047b8b6b5eaf875788930'}, u'url': u'http://172.16.10.36:8042/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'3d7c8fe8f14042aa9b987d7f6f678fbc', u'id': u'b97233de7e7047b8b6b5eaf875788930'}}
2019-11-21 06:29:29,776 [salt.state       :1951][INFO    ][26661] Completed state [aodh_admin] at time 06:29:29.776676 duration_in_ms=2000.222
2019-11-21 06:29:29,777 [salt.state       :1780][INFO    ][26661] Running state [nova] at time 06:29:29.777183
2019-11-21 06:29:29,777 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [nova]
2019-11-21 06:29:30,750 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'nova', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/77a1e7e237c24ae491d027c08164748f'}, u'enabled': True, u'type': u'compute', u'id': u'77a1e7e237c24ae491d027c08164748f', u'description': u'OpenStack Compute Service V2.1'}}
2019-11-21 06:29:30,750 [salt.state       :1951][INFO    ][26661] Completed state [nova] at time 06:29:30.750797 duration_in_ms=973.614
2019-11-21 06:29:30,752 [salt.state       :1780][INFO    ][26661] Running state [nova_admin_v2.1] at time 06:29:30.752693
2019-11-21 06:29:30,753 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [nova_admin_v2.1]
2019-11-21 06:29:32,801 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/81af92a11bf14a3e8e694bf3022b3f0d'}, u'url': u'http://172.16.10.36:8774/v2.1', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'77a1e7e237c24ae491d027c08164748f', u'id': u'81af92a11bf14a3e8e694bf3022b3f0d'}}
2019-11-21 06:29:32,801 [salt.state       :1951][INFO    ][26661] Completed state [nova_admin_v2.1] at time 06:29:32.801423 duration_in_ms=2048.73
2019-11-21 06:29:32,802 [salt.state       :1780][INFO    ][26661] Running state [nova_public_v2.1] at time 06:29:32.802581
2019-11-21 06:29:32,803 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [nova_public_v2.1]
2019-11-21 06:29:34,641 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/68973ef302a1493abf9974b606c90385'}, u'url': u'http://10.16.0.107:8774/v2.1', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'77a1e7e237c24ae491d027c08164748f', u'id': u'68973ef302a1493abf9974b606c90385'}}
2019-11-21 06:29:34,641 [salt.state       :1951][INFO    ][26661] Completed state [nova_public_v2.1] at time 06:29:34.641688 duration_in_ms=1839.106
2019-11-21 06:29:34,642 [salt.state       :1780][INFO    ][26661] Running state [nova_internal_v2.1] at time 06:29:34.642708
2019-11-21 06:29:34,643 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [nova_internal_v2.1]
2019-11-21 06:29:36,704 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/b9cd8172924a4b18b981344d576e6d00'}, u'url': u'http://172.16.10.36:8774/v2.1', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'77a1e7e237c24ae491d027c08164748f', u'id': u'b9cd8172924a4b18b981344d576e6d00'}}
2019-11-21 06:29:36,705 [salt.state       :1951][INFO    ][26661] Completed state [nova_internal_v2.1] at time 06:29:36.705645 duration_in_ms=2062.936
2019-11-21 06:29:36,706 [salt.state       :1780][INFO    ][26661] Running state [heat] at time 06:29:36.706363
2019-11-21 06:29:36,707 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [heat]
2019-11-21 06:29:37,584 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'heat', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/8598661bd46449c08ae4b7090fcc8ecd'}, u'enabled': True, u'type': u'orchestration', u'id': u'8598661bd46449c08ae4b7090fcc8ecd', u'description': u'OpenStack Orchestration Service'}}
2019-11-21 06:29:37,585 [salt.state       :1951][INFO    ][26661] Completed state [heat] at time 06:29:37.585335 duration_in_ms=878.971
2019-11-21 06:29:37,587 [salt.state       :1780][INFO    ][26661] Running state [heat_admin_v1] at time 06:29:37.587420
2019-11-21 06:29:37,588 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [heat_admin_v1]
2019-11-21 06:29:39,467 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/a624303410d34cab8b4a39abe007ad76'}, u'url': u'http://172.16.10.36:8004/v1/%(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'8598661bd46449c08ae4b7090fcc8ecd', u'id': u'a624303410d34cab8b4a39abe007ad76'}}
2019-11-21 06:29:39,468 [salt.state       :1951][INFO    ][26661] Completed state [heat_admin_v1] at time 06:29:39.467976 duration_in_ms=1880.554
2019-11-21 06:29:39,470 [salt.state       :1780][INFO    ][26661] Running state [heat_public_v1] at time 06:29:39.469935
2019-11-21 06:29:39,470 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [heat_public_v1]
2019-11-21 06:29:41,496 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/38f110ab3fa14c65981c153d0e7844a3'}, u'url': u'http://10.16.0.107:8004/v1/%(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'8598661bd46449c08ae4b7090fcc8ecd', u'id': u'38f110ab3fa14c65981c153d0e7844a3'}}
2019-11-21 06:29:41,497 [salt.state       :1951][INFO    ][26661] Completed state [heat_public_v1] at time 06:29:41.497361 duration_in_ms=2027.426
2019-11-21 06:29:41,498 [salt.state       :1780][INFO    ][26661] Running state [heat_internal_v1] at time 06:29:41.498835
2019-11-21 06:29:41,499 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [heat_internal_v1]
2019-11-21 06:29:43,587 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/dcbf58b395fc4a1d8b773801e675b114'}, u'url': u'http://172.16.10.36:8004/v1/%(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'8598661bd46449c08ae4b7090fcc8ecd', u'id': u'dcbf58b395fc4a1d8b773801e675b114'}}
2019-11-21 06:29:43,588 [salt.state       :1951][INFO    ][26661] Completed state [heat_internal_v1] at time 06:29:43.588575 duration_in_ms=2089.738
2019-11-21 06:29:43,589 [salt.state       :1780][INFO    ][26661] Running state [panko] at time 06:29:43.589211
2019-11-21 06:29:43,589 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [panko]
2019-11-21 06:29:44,494 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'panko', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/8a7cd07eaeb04fa78b80cab02baa5340'}, u'enabled': True, u'type': u'event', u'id': u'8a7cd07eaeb04fa78b80cab02baa5340', u'description': u'OpenStack Event Service'}}
2019-11-21 06:29:44,494 [salt.state       :1951][INFO    ][26661] Completed state [panko] at time 06:29:44.494884 duration_in_ms=905.671
2019-11-21 06:29:44,496 [salt.state       :1780][INFO    ][26661] Running state [panko_admin] at time 06:29:44.496911
2019-11-21 06:29:44,497 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [panko_admin]
2019-11-21 06:29:46,473 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/e2f6134bc69f489292ea937a93e56666'}, u'url': u'http://172.16.10.36:8977/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'8a7cd07eaeb04fa78b80cab02baa5340', u'id': u'e2f6134bc69f489292ea937a93e56666'}}
2019-11-21 06:29:46,473 [salt.state       :1951][INFO    ][26661] Completed state [panko_admin] at time 06:29:46.473725 duration_in_ms=1976.814
2019-11-21 06:29:46,475 [salt.state       :1780][INFO    ][26661] Running state [panko_internal] at time 06:29:46.475109
2019-11-21 06:29:46,475 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [panko_internal]
2019-11-21 06:29:48,558 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/7fc45f14812d4b1b8e65b7841257368a'}, u'url': u'http://172.16.10.36:8977/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'8a7cd07eaeb04fa78b80cab02baa5340', u'id': u'7fc45f14812d4b1b8e65b7841257368a'}}
2019-11-21 06:29:48,558 [salt.state       :1951][INFO    ][26661] Completed state [panko_internal] at time 06:29:48.558612 duration_in_ms=2083.503
2019-11-21 06:29:48,559 [salt.state       :1780][INFO    ][26661] Running state [panko_public] at time 06:29:48.559424
2019-11-21 06:29:48,559 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [panko_public]
2019-11-21 06:29:50,712 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/566a906f3f5b41d6939f8fc1b5ac1c43'}, u'url': u'http://10.16.0.107:8977/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'8a7cd07eaeb04fa78b80cab02baa5340', u'id': u'566a906f3f5b41d6939f8fc1b5ac1c43'}}
2019-11-21 06:29:50,713 [salt.state       :1951][INFO    ][26661] Completed state [panko_public] at time 06:29:50.713249 duration_in_ms=2153.824
2019-11-21 06:29:50,713 [salt.state       :1780][INFO    ][26661] Running state [keystone] at time 06:29:50.713598
2019-11-21 06:29:50,713 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [keystone]
2019-11-21 06:29:52,239 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'keystone', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/c196e2e256f344f7878bba7e2c900462'}, u'enabled': True, u'type': u'identity', u'id': u'c196e2e256f344f7878bba7e2c900462', u'description': u'OpenStack Identity Service'}}
2019-11-21 06:29:52,240 [salt.state       :1951][INFO    ][26661] Completed state [keystone] at time 06:29:52.240149 duration_in_ms=1526.549
2019-11-21 06:29:52,242 [salt.state       :1780][INFO    ][26661] Running state [keystone_public] at time 06:29:52.242142
2019-11-21 06:29:52,242 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [keystone_public]
2019-11-21 06:29:54,155 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/91f4b9d0552440c1b7341e450c96edc6'}, u'url': u'http://10.16.0.107:5000/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'c196e2e256f344f7878bba7e2c900462', u'id': u'91f4b9d0552440c1b7341e450c96edc6'}}
2019-11-21 06:29:54,156 [salt.state       :1951][INFO    ][26661] Completed state [keystone_public] at time 06:29:54.156014 duration_in_ms=1913.873
2019-11-21 06:29:54,156 [salt.state       :1780][INFO    ][26661] Running state [keystone_internal] at time 06:29:54.156836
2019-11-21 06:29:54,157 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [keystone_internal]
2019-11-21 06:29:55,714 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121062955699603
2019-11-21 06:29:55,726 [salt.minion      :1432][INFO    ][26814] Starting a new job with PID 26814
2019-11-21 06:29:55,743 [salt.minion      :1711][INFO    ][26814] Returning information for job: 20191121062955699603
2019-11-21 06:29:56,119 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/4a0ceff2c72044f087add3d0a6e588ee'}, u'url': u'http://172.16.10.36:5000/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'c196e2e256f344f7878bba7e2c900462', u'id': u'4a0ceff2c72044f087add3d0a6e588ee'}}
2019-11-21 06:29:56,119 [salt.state       :1951][INFO    ][26661] Completed state [keystone_internal] at time 06:29:56.119376 duration_in_ms=1962.539
2019-11-21 06:29:56,120 [salt.state       :1780][INFO    ][26661] Running state [keystone_admin] at time 06:29:56.120215
2019-11-21 06:29:56,120 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [keystone_admin]
2019-11-21 06:29:57,919 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/407c6f7f97e34859a330f35235f59254'}, u'url': u'http://172.16.10.36:5000/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'c196e2e256f344f7878bba7e2c900462', u'id': u'407c6f7f97e34859a330f35235f59254'}}
2019-11-21 06:29:57,919 [salt.state       :1951][INFO    ][26661] Completed state [keystone_admin] at time 06:29:57.919608 duration_in_ms=1799.392
2019-11-21 06:29:57,919 [salt.state       :1780][INFO    ][26661] Running state [gnocchi] at time 06:29:57.919883
2019-11-21 06:29:57,920 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [gnocchi]
2019-11-21 06:29:58,761 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'gnocchi', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/c8847db8380643b38d12921ec679abbd'}, u'enabled': True, u'type': u'metric', u'id': u'c8847db8380643b38d12921ec679abbd', u'description': u'OpenStack Metric Service'}}
2019-11-21 06:29:58,761 [salt.state       :1951][INFO    ][26661] Completed state [gnocchi] at time 06:29:58.761733 duration_in_ms=841.85
2019-11-21 06:29:58,762 [salt.state       :1780][INFO    ][26661] Running state [gnocchi_public] at time 06:29:58.762788
2019-11-21 06:29:58,763 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [gnocchi_public]
2019-11-21 06:30:00,602 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/c506ae5ff383471abb72aed58d4f6c4d'}, u'url': u'http://10.16.0.107:8041/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'c8847db8380643b38d12921ec679abbd', u'id': u'c506ae5ff383471abb72aed58d4f6c4d'}}
2019-11-21 06:30:00,602 [salt.state       :1951][INFO    ][26661] Completed state [gnocchi_public] at time 06:30:00.602898 duration_in_ms=1840.11
2019-11-21 06:30:00,604 [salt.state       :1780][INFO    ][26661] Running state [gnocchi_admin] at time 06:30:00.604028
2019-11-21 06:30:00,604 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [gnocchi_admin]
2019-11-21 06:30:02,458 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/a35b1ae0e2ba4d15be51a76afb57ba7c'}, u'url': u'http://172.16.10.36:8041/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'c8847db8380643b38d12921ec679abbd', u'id': u'a35b1ae0e2ba4d15be51a76afb57ba7c'}}
2019-11-21 06:30:02,459 [salt.state       :1951][INFO    ][26661] Completed state [gnocchi_admin] at time 06:30:02.458983 duration_in_ms=1854.954
2019-11-21 06:30:02,459 [salt.state       :1780][INFO    ][26661] Running state [gnocchi_internal] at time 06:30:02.459861
2019-11-21 06:30:02,460 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [gnocchi_internal]
2019-11-21 06:30:04,353 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/3aa9759c283044f587700db94ea5821a'}, u'url': u'http://172.16.10.36:8041/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'c8847db8380643b38d12921ec679abbd', u'id': u'3aa9759c283044f587700db94ea5821a'}}
2019-11-21 06:30:04,353 [salt.state       :1951][INFO    ][26661] Completed state [gnocchi_internal] at time 06:30:04.353727 duration_in_ms=1893.867
2019-11-21 06:30:04,354 [salt.state       :1780][INFO    ][26661] Running state [cinder] at time 06:30:04.354000
2019-11-21 06:30:04,354 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [cinder]
2019-11-21 06:30:05,317 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'cinder', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/93163273a59c40c78459903d9536b3cf'}, u'enabled': True, u'type': u'volume', u'id': u'93163273a59c40c78459903d9536b3cf', u'description': u'OpenStack Volume Service'}}
2019-11-21 06:30:05,317 [salt.state       :1951][INFO    ][26661] Completed state [cinder] at time 06:30:05.317415 duration_in_ms=963.415
2019-11-21 06:30:05,317 [salt.state       :1780][INFO    ][26661] Running state [glance] at time 06:30:05.317667
2019-11-21 06:30:05,318 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [glance]
2019-11-21 06:30:06,373 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'glance', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/276cb0f6cf794057b776f822581f7ffe'}, u'enabled': True, u'type': u'image', u'id': u'276cb0f6cf794057b776f822581f7ffe', u'description': u'OpenStack Image Service'}}
2019-11-21 06:30:06,373 [salt.state       :1951][INFO    ][26661] Completed state [glance] at time 06:30:06.373882 duration_in_ms=1056.214
2019-11-21 06:30:06,375 [salt.state       :1780][INFO    ][26661] Running state [glance_public] at time 06:30:06.375353
2019-11-21 06:30:06,375 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [glance_public]
2019-11-21 06:30:08,318 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/b77e28808fc843a39faf4569d1084ca6'}, u'url': u'http://10.16.0.107:9292', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'276cb0f6cf794057b776f822581f7ffe', u'id': u'b77e28808fc843a39faf4569d1084ca6'}}
2019-11-21 06:30:08,319 [salt.state       :1951][INFO    ][26661] Completed state [glance_public] at time 06:30:08.319003 duration_in_ms=1943.651
2019-11-21 06:30:08,319 [salt.state       :1780][INFO    ][26661] Running state [glance_internal] at time 06:30:08.319864
2019-11-21 06:30:08,320 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [glance_internal]
2019-11-21 06:30:10,471 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/ff5c63870f044eea8a73b167dbdd2ea8'}, u'url': u'http://172.16.10.36:9292', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'276cb0f6cf794057b776f822581f7ffe', u'id': u'ff5c63870f044eea8a73b167dbdd2ea8'}}
2019-11-21 06:30:10,472 [salt.state       :1951][INFO    ][26661] Completed state [glance_internal] at time 06:30:10.472026 duration_in_ms=2152.161
2019-11-21 06:30:10,472 [salt.state       :1780][INFO    ][26661] Running state [glance_admin] at time 06:30:10.472924
2019-11-21 06:30:10,473 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [glance_admin]
2019-11-21 06:30:12,522 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/01c7954e82d84cfdb9ce8f3565568d53'}, u'url': u'http://172.16.10.36:9292', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'276cb0f6cf794057b776f822581f7ffe', u'id': u'01c7954e82d84cfdb9ce8f3565568d53'}}
2019-11-21 06:30:12,523 [salt.state       :1951][INFO    ][26661] Completed state [glance_admin] at time 06:30:12.523330 duration_in_ms=2050.406
2019-11-21 06:30:12,524 [salt.state       :1780][INFO    ][26661] Running state [cinderv2] at time 06:30:12.524058
2019-11-21 06:30:12,524 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [cinderv2]
2019-11-21 06:30:13,432 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'cinderv2', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/d10f554a21744cd79dc652742b2c12b3'}, u'enabled': True, u'type': u'volumev2', u'id': u'd10f554a21744cd79dc652742b2c12b3', u'description': u'OpenStack Volume Service V2'}}
2019-11-21 06:30:13,433 [salt.state       :1951][INFO    ][26661] Completed state [cinderv2] at time 06:30:13.433330 duration_in_ms=909.272
2019-11-21 06:30:13,435 [salt.state       :1780][INFO    ][26661] Running state [cinder_public_v2] at time 06:30:13.435601
2019-11-21 06:30:13,436 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [cinder_public_v2]
2019-11-21 06:30:15,623 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/5b659f54f52945e7bc096476b6652e4f'}, u'url': u'http://10.16.0.107:8776/v2/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'd10f554a21744cd79dc652742b2c12b3', u'id': u'5b659f54f52945e7bc096476b6652e4f'}}
2019-11-21 06:30:15,623 [salt.state       :1951][INFO    ][26661] Completed state [cinder_public_v2] at time 06:30:15.623850 duration_in_ms=2188.25
2019-11-21 06:30:15,624 [salt.state       :1780][INFO    ][26661] Running state [cinder_admin_v2] at time 06:30:15.624776
2019-11-21 06:30:15,625 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [cinder_admin_v2]
2019-11-21 06:30:17,694 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/d2c97bc95e3c464d8948ffef12f368cf'}, u'url': u'http://172.16.10.36:8776/v2/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'd10f554a21744cd79dc652742b2c12b3', u'id': u'd2c97bc95e3c464d8948ffef12f368cf'}}
2019-11-21 06:30:17,695 [salt.state       :1951][INFO    ][26661] Completed state [cinder_admin_v2] at time 06:30:17.695075 duration_in_ms=2070.297
2019-11-21 06:30:17,696 [salt.state       :1780][INFO    ][26661] Running state [cinder_internal_v2] at time 06:30:17.696560
2019-11-21 06:30:17,697 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [cinder_internal_v2]
2019-11-21 06:30:19,706 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/dfcfcd8dd7204304be7bb630b792de8f'}, u'url': u'http://172.16.10.36:8776/v2/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'd10f554a21744cd79dc652742b2c12b3', u'id': u'dfcfcd8dd7204304be7bb630b792de8f'}}
2019-11-21 06:30:19,707 [salt.state       :1951][INFO    ][26661] Completed state [cinder_internal_v2] at time 06:30:19.707109 duration_in_ms=2010.548
2019-11-21 06:30:19,707 [salt.state       :1780][INFO    ][26661] Running state [barbican] at time 06:30:19.707696
2019-11-21 06:30:19,708 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [barbican]
2019-11-21 06:30:20,639 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'barbican', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/ce51d65d53c9415d8d33f8da1fa9d75b'}, u'enabled': True, u'type': u'key-manager', u'id': u'ce51d65d53c9415d8d33f8da1fa9d75b', u'description': u'OpenStack Key-Manager Service'}}
2019-11-21 06:30:20,639 [salt.state       :1951][INFO    ][26661] Completed state [barbican] at time 06:30:20.639848 duration_in_ms=932.151
2019-11-21 06:30:20,642 [salt.state       :1780][INFO    ][26661] Running state [barbican_admin] at time 06:30:20.642039
2019-11-21 06:30:20,642 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [barbican_admin]
2019-11-21 06:30:22,664 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/ec42fad9134948dc9de469e7bd61c7d2'}, u'url': u'http://172.16.10.36:9311/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'ce51d65d53c9415d8d33f8da1fa9d75b', u'id': u'ec42fad9134948dc9de469e7bd61c7d2'}}
2019-11-21 06:30:22,664 [salt.state       :1951][INFO    ][26661] Completed state [barbican_admin] at time 06:30:22.664869 duration_in_ms=2022.829
2019-11-21 06:30:22,666 [salt.state       :1780][INFO    ][26661] Running state [barbican_public] at time 06:30:22.666185
2019-11-21 06:30:22,666 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [barbican_public]
2019-11-21 06:30:24,675 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/85610ca2a7a142008312c87f6304fe86'}, u'url': u'http://10.16.0.107:9311/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'ce51d65d53c9415d8d33f8da1fa9d75b', u'id': u'85610ca2a7a142008312c87f6304fe86'}}
2019-11-21 06:30:24,676 [salt.state       :1951][INFO    ][26661] Completed state [barbican_public] at time 06:30:24.676073 duration_in_ms=2009.886
2019-11-21 06:30:24,678 [salt.state       :1780][INFO    ][26661] Running state [barbican_internal] at time 06:30:24.677961
2019-11-21 06:30:24,678 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [barbican_internal]
2019-11-21 06:30:25,753 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063025739150
2019-11-21 06:30:25,773 [salt.minion      :1432][INFO    ][26825] Starting a new job with PID 26825
2019-11-21 06:30:25,794 [salt.minion      :1711][INFO    ][26825] Returning information for job: 20191121063025739150
2019-11-21 06:30:26,717 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/58b9bcbd14c4475baed2f40cf7a6803c'}, u'url': u'http://172.16.10.36:9311/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'ce51d65d53c9415d8d33f8da1fa9d75b', u'id': u'58b9bcbd14c4475baed2f40cf7a6803c'}}
2019-11-21 06:30:26,717 [salt.state       :1951][INFO    ][26661] Completed state [barbican_internal] at time 06:30:26.717690 duration_in_ms=2039.729
2019-11-21 06:30:26,718 [salt.state       :1780][INFO    ][26661] Running state [neutron] at time 06:30:26.718039
2019-11-21 06:30:26,718 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.service_present for [neutron]
2019-11-21 06:30:27,663 [salt.state       :300 ][INFO    ][26661] {u'service': {u'name': u'neutron', u'links': {u'self': u'http://172.16.10.36:5000/v3/services/21656850d52e4251aa8661bb31ed0cc5'}, u'enabled': True, u'type': u'network', u'id': u'21656850d52e4251aa8661bb31ed0cc5', u'description': u'OpenStack Networking Service'}}
2019-11-21 06:30:27,663 [salt.state       :1951][INFO    ][26661] Completed state [neutron] at time 06:30:27.663383 duration_in_ms=945.343
2019-11-21 06:30:27,664 [salt.state       :1780][INFO    ][26661] Running state [neutron_public] at time 06:30:27.664801
2019-11-21 06:30:27,665 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [neutron_public]
2019-11-21 06:30:29,621 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/525ef1b340254cebbf44fd0c5b78b417'}, u'url': u'http://10.16.0.107:9696/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'21656850d52e4251aa8661bb31ed0cc5', u'id': u'525ef1b340254cebbf44fd0c5b78b417'}}
2019-11-21 06:30:29,622 [salt.state       :1951][INFO    ][26661] Completed state [neutron_public] at time 06:30:29.622196 duration_in_ms=1957.395
2019-11-21 06:30:29,623 [salt.state       :1780][INFO    ][26661] Running state [neutron_admin] at time 06:30:29.623034
2019-11-21 06:30:29,623 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [neutron_admin]
2019-11-21 06:30:31,454 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/5be405afcc9c4224a82bdf2a191ec0ad'}, u'url': u'http://172.16.10.36:9696/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'21656850d52e4251aa8661bb31ed0cc5', u'id': u'5be405afcc9c4224a82bdf2a191ec0ad'}}
2019-11-21 06:30:31,455 [salt.state       :1951][INFO    ][26661] Completed state [neutron_admin] at time 06:30:31.455188 duration_in_ms=1832.152
2019-11-21 06:30:31,457 [salt.state       :1780][INFO    ][26661] Running state [neutron_internal] at time 06:30:31.457491
2019-11-21 06:30:31,458 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.endpoint_present for [neutron_internal]
2019-11-21 06:30:33,322 [salt.state       :300 ][INFO    ][26661] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://172.16.10.36:5000/v3/endpoints/65f8381d26ed4816b7d4d56278c179d7'}, u'url': u'http://172.16.10.36:9696/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'21656850d52e4251aa8661bb31ed0cc5', u'id': u'65f8381d26ed4816b7d4d56278c179d7'}}
2019-11-21 06:30:33,322 [salt.state       :1951][INFO    ][26661] Completed state [neutron_internal] at time 06:30:33.322432 duration_in_ms=1864.941
2019-11-21 06:30:33,322 [salt.state       :1780][INFO    ][26661] Running state [Default] at time 06:30:33.322691
2019-11-21 06:30:33,323 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.domain_present for [Default]
2019-11-21 06:30:33,792 [salt.state       :300 ][INFO    ][26661] domainDefault is in desired state
2019-11-21 06:30:33,793 [salt.state       :1951][INFO    ][26661] Completed state [Default] at time 06:30:33.793544 duration_in_ms=470.853
2019-11-21 06:30:33,794 [salt.state       :1780][INFO    ][26661] Running state [admin] at time 06:30:33.794104
2019-11-21 06:30:33,794 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.project_present for [admin]
2019-11-21 06:30:34,796 [salt.state       :300 ][INFO    ][26661] {u'project': {u'is_domain': False, u'description': u'OpenStack Admin tenant', u'links': {u'self': u'http://172.16.10.36:5000/v3/projects/bb75c5ce22dc4eb9bfa885e6cf4890a0'}, u'extra': {}, u'tags': [], u'enabled': True, u'domain_id': u'default', u'parent_id': u'default', u'id': u'bb75c5ce22dc4eb9bfa885e6cf4890a0', u'name': u'admin'}}
2019-11-21 06:30:34,796 [salt.state       :1951][INFO    ][26661] Completed state [admin] at time 06:30:34.796787 duration_in_ms=1002.682
2019-11-21 06:30:34,797 [salt.state       :1780][INFO    ][26661] Running state [service] at time 06:30:34.797402
2019-11-21 06:30:34,798 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.project_present for [service]
2019-11-21 06:30:35,767 [salt.state       :300 ][INFO    ][26661] {u'project': {u'is_domain': False, u'description': u'OpenStack Service tenant', u'links': {u'self': u'http://172.16.10.36:5000/v3/projects/3114041925e04c82b6d27ed5ba405196'}, u'tags': [], u'enabled': True, u'domain_id': u'default', u'parent_id': u'default', u'id': u'3114041925e04c82b6d27ed5ba405196', u'name': u'service'}}
2019-11-21 06:30:35,768 [salt.state       :1951][INFO    ][26661] Completed state [service] at time 06:30:35.768595 duration_in_ms=971.193
2019-11-21 06:30:35,769 [salt.state       :1780][INFO    ][26661] Running state [heat] at time 06:30:35.769313
2019-11-21 06:30:35,770 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.domain_present for [heat]
2019-11-21 06:30:36,751 [salt.state       :300 ][INFO    ][26661] {u'domain': {u'name': u'heat', u'links': {u'self': u'http://172.16.10.36:5000/v3/domains/49c502e64eee474e9db9541b4fb47468'}, u'tags': [], u'enabled': True, u'id': u'49c502e64eee474e9db9541b4fb47468', u'description': u'Contains users and projects created by heat'}}
2019-11-21 06:30:36,751 [salt.state       :1951][INFO    ][26661] Completed state [heat] at time 06:30:36.751606 duration_in_ms=982.292
2019-11-21 06:30:36,752 [salt.state       :1780][INFO    ][26661] Running state [ceilometer] at time 06:30:36.752154
2019-11-21 06:30:36,752 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [ceilometer]
2019-11-21 06:30:38,069 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'ceilometer', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/6e2f5845de7344baa2fd09e911f9d104'}, u'domain_id': u'default', u'enabled': True, u'options': {}, u'email': u'root@localhost', u'id': u'6e2f5845de7344baa2fd09e911f9d104', u'password_expires_at': None}}
2019-11-21 06:30:38,070 [salt.state       :1951][INFO    ][26661] Completed state [ceilometer] at time 06:30:38.070435 duration_in_ms=1318.28
2019-11-21 06:30:38,071 [salt.state       :1780][INFO    ][26661] Running state [ceilometer] at time 06:30:38.071061
2019-11-21 06:30:38,071 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [ceilometer]
2019-11-21 06:30:41,918 [salt.state       :300 ][INFO    ][26661] user_role_assignmentceilometer created
2019-11-21 06:30:41,918 [salt.state       :1951][INFO    ][26661] Completed state [ceilometer] at time 06:30:41.918414 duration_in_ms=3847.352
2019-11-21 06:30:41,918 [salt.state       :1780][INFO    ][26661] Running state [admin] at time 06:30:41.918674
2019-11-21 06:30:41,918 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [admin]
2019-11-21 06:30:42,618 [salt.loaded.ext.states.keystonev3:272 ][INFO    ][26661] Updating keystone user 8930dbe01ba844ada32312a1da348119 with: {'email': 'root@localhost'}
2019-11-21 06:30:43,452 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'admin', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/8930dbe01ba844ada32312a1da348119'}, u'extra': {u'email': u'root@localhost'}, u'enabled': True, u'options': {u'ignore_change_password_upon_first_use': True}, u'email': u'root@localhost', u'id': u'8930dbe01ba844ada32312a1da348119', u'domain_id': u'default', u'password_expires_at': None}}
2019-11-21 06:30:43,453 [salt.state       :1951][INFO    ][26661] Completed state [admin] at time 06:30:43.452951 duration_in_ms=1534.277
2019-11-21 06:30:43,453 [salt.state       :1780][INFO    ][26661] Running state [admin] at time 06:30:43.453269
2019-11-21 06:30:43,453 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [admin]
2019-11-21 06:30:46,751 [salt.state       :300 ][INFO    ][26661] user_role_assignmentadmin is in desired state
2019-11-21 06:30:46,751 [salt.state       :1951][INFO    ][26661] Completed state [admin] at time 06:30:46.751559 duration_in_ms=3298.288
2019-11-21 06:30:46,752 [salt.state       :1780][INFO    ][26661] Running state [aodh] at time 06:30:46.752117
2019-11-21 06:30:46,752 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [aodh]
2019-11-21 06:30:48,097 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'aodh', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/81e8f016d8be4a1f9f5618c373cdbd90'}, u'domain_id': u'default', u'enabled': True, u'options': {}, u'email': u'root@localhost', u'id': u'81e8f016d8be4a1f9f5618c373cdbd90', u'password_expires_at': None}}
2019-11-21 06:30:48,098 [salt.state       :1951][INFO    ][26661] Completed state [aodh] at time 06:30:48.098282 duration_in_ms=1346.165
2019-11-21 06:30:48,098 [salt.state       :1780][INFO    ][26661] Running state [aodh] at time 06:30:48.098535
2019-11-21 06:30:48,099 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [aodh]
2019-11-21 06:30:52,197 [salt.state       :300 ][INFO    ][26661] user_role_assignmentaodh created
2019-11-21 06:30:52,198 [salt.state       :1951][INFO    ][26661] Completed state [aodh] at time 06:30:52.198226 duration_in_ms=4099.689
2019-11-21 06:30:52,198 [salt.state       :1780][INFO    ][26661] Running state [nova] at time 06:30:52.198789
2019-11-21 06:30:52,199 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [nova]
2019-11-21 06:30:53,498 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'nova', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/ea5230389efc4351b140fe832377a9e7'}, u'domain_id': u'default', u'enabled': True, u'options': {}, u'email': u'root@localhost', u'id': u'ea5230389efc4351b140fe832377a9e7', u'password_expires_at': None}}
2019-11-21 06:30:53,498 [salt.state       :1951][INFO    ][26661] Completed state [nova] at time 06:30:53.498323 duration_in_ms=1299.535
2019-11-21 06:30:53,498 [salt.state       :1780][INFO    ][26661] Running state [nova] at time 06:30:53.498728
2019-11-21 06:30:53,499 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [nova]
2019-11-21 06:30:55,807 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063055792501
2019-11-21 06:30:55,821 [salt.minion      :1432][INFO    ][26870] Starting a new job with PID 26870
2019-11-21 06:30:55,838 [salt.minion      :1711][INFO    ][26870] Returning information for job: 20191121063055792501
2019-11-21 06:30:57,291 [salt.state       :300 ][INFO    ][26661] user_role_assignmentnova created
2019-11-21 06:30:57,292 [salt.state       :1951][INFO    ][26661] Completed state [nova] at time 06:30:57.292248 duration_in_ms=3793.518
2019-11-21 06:30:57,292 [salt.state       :1780][INFO    ][26661] Running state [heat_domain_admin] at time 06:30:57.292704
2019-11-21 06:30:57,293 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [heat_domain_admin]
2019-11-21 06:31:00,061 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'heat_domain_admin', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/6cbdcb0406914512be1685aa490c0129'}, u'domain_id': u'49c502e64eee474e9db9541b4fb47468', u'enabled': True, u'options': {}, u'email': u'root@localhost', u'id': u'6cbdcb0406914512be1685aa490c0129', u'password_expires_at': None}}
2019-11-21 06:31:00,061 [salt.state       :1951][INFO    ][26661] Completed state [heat_domain_admin] at time 06:31:00.061583 duration_in_ms=2768.879
2019-11-21 06:31:00,061 [salt.state       :1780][INFO    ][26661] Running state [heat_domain_admin] at time 06:31:00.061940
2019-11-21 06:31:00,062 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [heat_domain_admin]
2019-11-21 06:31:05,265 [salt.state       :300 ][INFO    ][26661] user_role_assignmentheat_domain_admin created
2019-11-21 06:31:05,265 [salt.state       :1951][INFO    ][26661] Completed state [heat_domain_admin] at time 06:31:05.265520 duration_in_ms=5203.58
2019-11-21 06:31:05,265 [salt.state       :1780][INFO    ][26661] Running state [heat] at time 06:31:05.265888
2019-11-21 06:31:05,266 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [heat]
2019-11-21 06:31:06,670 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'heat', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/aa9f29edc3994416a0d89a4148ea5b19'}, u'domain_id': u'default', u'enabled': True, u'options': {}, u'email': u'root@localhost', u'id': u'aa9f29edc3994416a0d89a4148ea5b19', u'password_expires_at': None}}
2019-11-21 06:31:06,670 [salt.state       :1951][INFO    ][26661] Completed state [heat] at time 06:31:06.670852 duration_in_ms=1404.964
2019-11-21 06:31:06,671 [salt.state       :1780][INFO    ][26661] Running state [heat] at time 06:31:06.671214
2019-11-21 06:31:06,672 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [heat]
2019-11-21 06:31:10,722 [salt.state       :300 ][INFO    ][26661] user_role_assignmentheat created
2019-11-21 06:31:10,723 [salt.state       :1951][INFO    ][26661] Completed state [heat] at time 06:31:10.723623 duration_in_ms=4052.407
2019-11-21 06:31:10,724 [salt.state       :1780][INFO    ][26661] Running state [panko] at time 06:31:10.724277
2019-11-21 06:31:10,724 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [panko]
2019-11-21 06:31:12,028 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'panko', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/e61b50a9d7ab4b3589355ec6864b4a51'}, u'domain_id': u'default', u'enabled': True, u'options': {}, u'email': u'root@localhost', u'id': u'e61b50a9d7ab4b3589355ec6864b4a51', u'password_expires_at': None}}
2019-11-21 06:31:12,029 [salt.state       :1951][INFO    ][26661] Completed state [panko] at time 06:31:12.029826 duration_in_ms=1305.548
2019-11-21 06:31:12,030 [salt.state       :1780][INFO    ][26661] Running state [panko] at time 06:31:12.030880
2019-11-21 06:31:12,031 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [panko]
2019-11-21 06:31:15,718 [salt.state       :300 ][INFO    ][26661] user_role_assignmentpanko created
2019-11-21 06:31:15,718 [salt.state       :1951][INFO    ][26661] Completed state [panko] at time 06:31:15.718795 duration_in_ms=3687.915
2019-11-21 06:31:15,719 [salt.state       :1780][INFO    ][26661] Running state [gnocchi] at time 06:31:15.719597
2019-11-21 06:31:15,720 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [gnocchi]
2019-11-21 06:31:17,044 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'gnocchi', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/fc52c16ac48947998ee789104a19a54e'}, u'domain_id': u'default', u'enabled': True, u'options': {}, u'email': u'root@localhost', u'id': u'fc52c16ac48947998ee789104a19a54e', u'password_expires_at': None}}
2019-11-21 06:31:17,044 [salt.state       :1951][INFO    ][26661] Completed state [gnocchi] at time 06:31:17.044512 duration_in_ms=1324.915
2019-11-21 06:31:17,044 [salt.state       :1780][INFO    ][26661] Running state [gnocchi] at time 06:31:17.044763
2019-11-21 06:31:17,045 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [gnocchi]
2019-11-21 06:31:21,292 [salt.state       :300 ][INFO    ][26661] user_role_assignmentgnocchi created
2019-11-21 06:31:21,292 [salt.state       :1951][INFO    ][26661] Completed state [gnocchi] at time 06:31:21.292615 duration_in_ms=4247.851
2019-11-21 06:31:21,292 [salt.state       :1780][INFO    ][26661] Running state [cinder] at time 06:31:21.292901
2019-11-21 06:31:21,293 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [cinder]
2019-11-21 06:31:22,664 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'cinder', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/12b684226c7b43d8a6a0542c4bd525f4'}, u'domain_id': u'default', u'enabled': True, u'options': {}, u'email': u'root@localhost', u'id': u'12b684226c7b43d8a6a0542c4bd525f4', u'password_expires_at': None}}
2019-11-21 06:31:22,665 [salt.state       :1951][INFO    ][26661] Completed state [cinder] at time 06:31:22.665463 duration_in_ms=1372.561
2019-11-21 06:31:22,666 [salt.state       :1780][INFO    ][26661] Running state [cinder] at time 06:31:22.666349
2019-11-21 06:31:22,667 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [cinder]
2019-11-21 06:31:25,835 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063125820431
2019-11-21 06:31:25,854 [salt.minion      :1432][INFO    ][26881] Starting a new job with PID 26881
2019-11-21 06:31:25,881 [salt.minion      :1711][INFO    ][26881] Returning information for job: 20191121063125820431
2019-11-21 06:31:26,462 [salt.state       :300 ][INFO    ][26661] user_role_assignmentcinder created
2019-11-21 06:31:26,462 [salt.state       :1951][INFO    ][26661] Completed state [cinder] at time 06:31:26.462928 duration_in_ms=3796.578
2019-11-21 06:31:26,463 [salt.state       :1780][INFO    ][26661] Running state [glance] at time 06:31:26.463211
2019-11-21 06:31:26,463 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [glance]
2019-11-21 06:31:28,008 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'glance', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/5a4dc6909868443fb1685c7b345ad672'}, u'domain_id': u'default', u'enabled': True, u'options': {}, u'email': u'root@localhost', u'id': u'5a4dc6909868443fb1685c7b345ad672', u'password_expires_at': None}}
2019-11-21 06:31:28,009 [salt.state       :1951][INFO    ][26661] Completed state [glance] at time 06:31:28.009235 duration_in_ms=1546.022
2019-11-21 06:31:28,009 [salt.state       :1780][INFO    ][26661] Running state [glance] at time 06:31:28.009840
2019-11-21 06:31:28,010 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [glance]
2019-11-21 06:31:32,047 [salt.state       :300 ][INFO    ][26661] user_role_assignmentglance created
2019-11-21 06:31:32,048 [salt.state       :1951][INFO    ][26661] Completed state [glance] at time 06:31:32.048237 duration_in_ms=4038.398
2019-11-21 06:31:32,048 [salt.state       :1780][INFO    ][26661] Running state [barbican] at time 06:31:32.048521
2019-11-21 06:31:32,048 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [barbican]
2019-11-21 06:31:33,476 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'barbican', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/a9593f4a859a47cfa62e3794e05d2c79'}, u'domain_id': u'default', u'enabled': True, u'options': {}, u'email': u'root@localhost', u'id': u'a9593f4a859a47cfa62e3794e05d2c79', u'password_expires_at': None}}
2019-11-21 06:31:33,477 [salt.state       :1951][INFO    ][26661] Completed state [barbican] at time 06:31:33.477070 duration_in_ms=1428.548
2019-11-21 06:31:33,477 [salt.state       :1780][INFO    ][26661] Running state [barbican] at time 06:31:33.477331
2019-11-21 06:31:33,477 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [barbican]
2019-11-21 06:31:37,470 [salt.state       :300 ][INFO    ][26661] user_role_assignmentbarbican created
2019-11-21 06:31:37,471 [salt.state       :1951][INFO    ][26661] Completed state [barbican] at time 06:31:37.471227 duration_in_ms=3993.895
2019-11-21 06:31:37,471 [salt.state       :1780][INFO    ][26661] Running state [barbican] at time 06:31:37.471505
2019-11-21 06:31:37,471 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [barbican]
2019-11-21 06:31:41,429 [salt.state       :300 ][INFO    ][26661] user_role_assignmentbarbican created
2019-11-21 06:31:41,429 [salt.state       :1951][INFO    ][26661] Completed state [barbican] at time 06:31:41.429440 duration_in_ms=3957.935
2019-11-21 06:31:41,429 [salt.state       :1780][INFO    ][26661] Running state [barbican] at time 06:31:41.429707
2019-11-21 06:31:41,429 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [barbican]
2019-11-21 06:31:45,618 [salt.state       :300 ][INFO    ][26661] user_role_assignmentbarbican created
2019-11-21 06:31:45,619 [salt.state       :1951][INFO    ][26661] Completed state [barbican] at time 06:31:45.619347 duration_in_ms=4189.637
2019-11-21 06:31:45,620 [salt.state       :1780][INFO    ][26661] Running state [neutron] at time 06:31:45.619959
2019-11-21 06:31:45,620 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_present for [neutron]
2019-11-21 06:31:47,007 [salt.state       :300 ][INFO    ][26661] {u'user': {u'name': u'neutron', u'links': {u'self': u'http://172.16.10.36:5000/v3/users/e50035f00c5444078068d595da4de99c'}, u'domain_id': u'default', u'enabled': True, u'options': {}, u'email': u'root@localhost', u'id': u'e50035f00c5444078068d595da4de99c', u'password_expires_at': None}}
2019-11-21 06:31:47,008 [salt.state       :1951][INFO    ][26661] Completed state [neutron] at time 06:31:47.008582 duration_in_ms=1388.622
2019-11-21 06:31:47,009 [salt.state       :1780][INFO    ][26661] Running state [neutron] at time 06:31:47.009298
2019-11-21 06:31:47,010 [salt.state       :1813][INFO    ][26661] Executing state keystonev3.user_role_assigned for [neutron]
2019-11-21 06:31:50,937 [salt.state       :300 ][INFO    ][26661] user_role_assignmentneutron created
2019-11-21 06:31:50,937 [salt.state       :1951][INFO    ][26661] Completed state [neutron] at time 06:31:50.937667 duration_in_ms=3928.368
2019-11-21 06:31:50,961 [salt.minion      :1711][INFO    ][26661] Returning information for job: 20191121062840590689
2019-11-21 06:31:51,723 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command cmd.run with jid 20191121063151710239
2019-11-21 06:31:51,746 [salt.minion      :1432][INFO    ][26928] Starting a new job with PID 26928
2019-11-21 06:31:51,758 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][26928] Executing command '. /root/keystonercv3; openstack service list' in directory '/root'
2019-11-21 06:31:58,788 [salt.minion      :1711][INFO    ][26928] Returning information for job: 20191121063151710239
2019-11-21 06:31:59,405 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121063159393052
2019-11-21 06:31:59,430 [salt.minion      :1432][INFO    ][26952] Starting a new job with PID 26952
2019-11-21 06:32:06,051 [salt.state       :915 ][INFO    ][26952] Loading fresh modules for state activity
2019-11-21 06:32:06,108 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'glance/init.sls'
2019-11-21 06:32:06,147 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'glance/server.sls'
2019-11-21 06:32:06,398 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'glance/db/offline_sync.sls'
2019-11-21 06:32:06,477 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'glance/_ssl/mysql.sls'
2019-11-21 06:32:06,554 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'glance/_ssl/rabbitmq.sls'
2019-11-21 06:32:07,161 [keyring.backend  :154 ][INFO    ][26952] Loading Windows (alt)
2019-11-21 06:32:07,164 [keyring.backend  :154 ][INFO    ][26952] Loading pyfs
2019-11-21 06:32:07,165 [keyring.backend  :154 ][INFO    ][26952] Loading multi
2019-11-21 06:32:07,166 [keyring.backend  :154 ][INFO    ][26952] Loading Google
2019-11-21 06:32:07,167 [keyring.backend  :154 ][INFO    ][26952] Loading Gnome
2019-11-21 06:32:07,171 [keyring.backend  :154 ][INFO    ][26952] Loading keyczar
2019-11-21 06:32:07,171 [keyring.backend  :154 ][INFO    ][26952] Loading file
2019-11-21 06:32:07,171 [keyring.backend  :154 ][INFO    ][26952] Loading kwallet
2019-11-21 06:32:08,007 [salt.state       :1780][INFO    ][26952] Running state [glance] at time 06:32:08.007460
2019-11-21 06:32:08,007 [salt.state       :1813][INFO    ][26952] Executing state group.present for [glance]
2019-11-21 06:32:08,009 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['groupadd', '-g 302', '-r', 'glance'] in directory '/root'
2019-11-21 06:32:08,046 [salt.state       :300 ][INFO    ][26952] {'passwd': 'x', 'gid': 302, 'name': 'glance', 'members': []}
2019-11-21 06:32:08,046 [salt.state       :1951][INFO    ][26952] Completed state [glance] at time 06:32:08.046659 duration_in_ms=39.198
2019-11-21 06:32:08,047 [salt.state       :1780][INFO    ][26952] Running state [glance] at time 06:32:08.047590
2019-11-21 06:32:08,048 [salt.state       :1813][INFO    ][26952] Executing state user.present for [glance]
2019-11-21 06:32:08,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['useradd', '-s', '/bin/false', '-u', '302', '-g', '302', '-m', '-d', '/var/lib/glance', '-r', 'glance'] in directory '/root'
2019-11-21 06:32:08,079 [salt.state       :300 ][INFO    ][26952] {'shell': '/bin/false', 'workphone': '', 'uid': 302, 'passwd': 'x', 'roomnumber': '', 'groups': ['glance'], 'home': '/var/lib/glance', 'name': 'glance', 'gid': 302, 'fullname': '', 'homephone': ''}
2019-11-21 06:32:08,079 [salt.state       :1951][INFO    ][26952] Completed state [glance] at time 06:32:08.079497 duration_in_ms=31.908
2019-11-21 06:32:08,080 [salt.state       :1780][INFO    ][26952] Running state [glance] at time 06:32:08.080650
2019-11-21 06:32:08,081 [salt.state       :1813][INFO    ][26952] Executing state pkg.installed for [glance]
2019-11-21 06:32:08,082 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:32:08,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['apt-cache', '-q', 'policy', 'glance'] in directory '/root'
2019-11-21 06:32:08,578 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:32:11,107 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:32:11,141 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'glance'] in directory '/root'
2019-11-21 06:32:14,530 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063214513684
2019-11-21 06:32:14,552 [salt.minion      :1432][INFO    ][27351] Starting a new job with PID 27351
2019-11-21 06:32:14,573 [salt.minion      :1711][INFO    ][27351] Returning information for job: 20191121063214513684
2019-11-21 06:32:31,319 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:32:31,365 [salt.state       :300 ][INFO    ][26952] Made the following changes:
'python-retrying' changed from 'absent' to '1.3.3-1'
'libblas.so.3' changed from 'absent' to '1'
'python-os-win' changed from 'absent' to '3.0.0-1.0~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.14.1-1~u16.04+mcp6'
'python-os-brick' changed from 'absent' to '2.5.8-1~u16.04+mcp8'
'python-oslo.vmware' changed from 'absent' to '2.26.0-2~u16.04+mcp'
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'glance' changed from 'absent' to '2:17.0.0-1~u16.04+mcp48'
'python2.7-numpy' changed from 'absent' to '1'
'glance-store-common' changed from 'absent' to '0.26.1-1~u16.04+mcp12'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-f2py' changed from 'absent' to '1'
'python2.7-glance' changed from 'absent' to '1'
'os-brick-common' changed from 'absent' to '2.5.8-1~u16.04+mcp8'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-semantic-version' changed from 'absent' to '2.3.1-1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'glance-common' changed from 'absent' to '2:17.0.0-1~u16.04+mcp48'
'python-glance-store' changed from 'absent' to '0.26.1-1~u16.04+mcp12'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'python-doc8' changed from 'absent' to '0.6.0-3'
'python-swiftclient' changed from 'absent' to '1:3.6.0-2~u16.04+mcp12'
'python-numpy-dev' changed from 'absent' to '1'
'python-taskflow' changed from 'absent' to '3.1.0-1.1~u16.04+mcp13'
'python-oslo.privsep' changed from 'absent' to '1.29.2-1~u16.04+mcp2'
'liblapack.so.3' changed from 'absent' to '1'
'python-automaton' changed from 'absent' to '1.15.0-1.0~u16.04+mcp7'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-cursive' changed from 'absent' to '0.2.1-1.0~u16.04+mcp1'
'python-httplib2' changed from 'absent' to '0.9.1+dfsg-1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-glance' changed from 'absent' to '2:17.0.0-1~u16.04+mcp48'
'python-numpy-api10' changed from 'absent' to '1'
'python-barbicanclient' changed from 'absent' to '4.7.2-2~u16.04+mcp9'
'python-castellan' changed from 'absent' to '0.19.0-1~u16.04+mcp8'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'glance-api' changed from 'absent' to '2:17.0.0-1~u16.04+mcp48'
'python-suds' changed from 'absent' to '0.7~git20150727.94664dd-3'
'python-networkx' changed from 'absent' to '1.11-1ubuntu1'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-restructuredtext-lint' changed from 'absent' to '0.12.2-2'
'glance-registry' changed from 'absent' to '2:17.0.0-1~u16.04+mcp48'

2019-11-21 06:32:31,398 [salt.state       :915 ][INFO    ][26952] Loading fresh modules for state activity
2019-11-21 06:32:31,441 [salt.state       :1951][INFO    ][26952] Completed state [glance] at time 06:32:31.441655 duration_in_ms=23361.006
2019-11-21 06:32:31,448 [salt.state       :1780][INFO    ][26952] Running state [glance-api] at time 06:32:31.448427
2019-11-21 06:32:31,448 [salt.state       :1813][INFO    ][26952] Executing state pkg.installed for [glance-api]
2019-11-21 06:32:32,220 [salt.state       :300 ][INFO    ][26952] All specified packages are already installed
2019-11-21 06:32:32,221 [salt.state       :1951][INFO    ][26952] Completed state [glance-api] at time 06:32:32.221197 duration_in_ms=772.769
2019-11-21 06:32:32,222 [salt.state       :1780][INFO    ][26952] Running state [glance-registry] at time 06:32:32.222055
2019-11-21 06:32:32,222 [salt.state       :1813][INFO    ][26952] Executing state pkg.installed for [glance-registry]
2019-11-21 06:32:32,348 [salt.state       :300 ][INFO    ][26952] All specified packages are already installed
2019-11-21 06:32:32,348 [salt.state       :1951][INFO    ][26952] Completed state [glance-registry] at time 06:32:32.348672 duration_in_ms=126.616
2019-11-21 06:32:32,349 [salt.state       :1780][INFO    ][26952] Running state [glance-common] at time 06:32:32.349500
2019-11-21 06:32:32,349 [salt.state       :1813][INFO    ][26952] Executing state pkg.installed for [glance-common]
2019-11-21 06:32:32,359 [salt.state       :300 ][INFO    ][26952] All specified packages are already installed
2019-11-21 06:32:32,359 [salt.state       :1951][INFO    ][26952] Completed state [glance-common] at time 06:32:32.359693 duration_in_ms=10.193
2019-11-21 06:32:32,360 [salt.state       :1780][INFO    ][26952] Running state [python-glance] at time 06:32:32.360425
2019-11-21 06:32:32,360 [salt.state       :1813][INFO    ][26952] Executing state pkg.installed for [python-glance]
2019-11-21 06:32:32,370 [salt.state       :300 ][INFO    ][26952] All specified packages are already installed
2019-11-21 06:32:32,370 [salt.state       :1951][INFO    ][26952] Completed state [python-glance] at time 06:32:32.370405 duration_in_ms=9.98
2019-11-21 06:32:32,371 [salt.state       :1780][INFO    ][26952] Running state [python-glance-store] at time 06:32:32.371073
2019-11-21 06:32:32,371 [salt.state       :1813][INFO    ][26952] Executing state pkg.installed for [python-glance-store]
2019-11-21 06:32:32,380 [salt.state       :300 ][INFO    ][26952] All specified packages are already installed
2019-11-21 06:32:32,380 [salt.state       :1951][INFO    ][26952] Completed state [python-glance-store] at time 06:32:32.380595 duration_in_ms=9.522
2019-11-21 06:32:32,381 [salt.state       :1780][INFO    ][26952] Running state [python-glanceclient] at time 06:32:32.381291
2019-11-21 06:32:32,381 [salt.state       :1813][INFO    ][26952] Executing state pkg.installed for [python-glanceclient]
2019-11-21 06:32:32,391 [salt.state       :300 ][INFO    ][26952] All specified packages are already installed
2019-11-21 06:32:32,391 [salt.state       :1951][INFO    ][26952] Completed state [python-glanceclient] at time 06:32:32.391416 duration_in_ms=10.125
2019-11-21 06:32:32,392 [salt.state       :1780][INFO    ][26952] Running state [gettext-base] at time 06:32:32.392099
2019-11-21 06:32:32,392 [salt.state       :1813][INFO    ][26952] Executing state pkg.installed for [gettext-base]
2019-11-21 06:32:32,401 [salt.state       :300 ][INFO    ][26952] All specified packages are already installed
2019-11-21 06:32:32,401 [salt.state       :1951][INFO    ][26952] Completed state [gettext-base] at time 06:32:32.401448 duration_in_ms=9.349
2019-11-21 06:32:32,402 [salt.state       :1780][INFO    ][26952] Running state [python-memcache] at time 06:32:32.402117
2019-11-21 06:32:32,402 [salt.state       :1813][INFO    ][26952] Executing state pkg.installed for [python-memcache]
2019-11-21 06:32:32,411 [salt.state       :300 ][INFO    ][26952] All specified packages are already installed
2019-11-21 06:32:32,411 [salt.state       :1951][INFO    ][26952] Completed state [python-memcache] at time 06:32:32.411459 duration_in_ms=9.342
2019-11-21 06:32:32,412 [salt.state       :1780][INFO    ][26952] Running state [python-pycadf] at time 06:32:32.412144
2019-11-21 06:32:32,412 [salt.state       :1813][INFO    ][26952] Executing state pkg.installed for [python-pycadf]
2019-11-21 06:32:32,421 [salt.state       :300 ][INFO    ][26952] All specified packages are already installed
2019-11-21 06:32:32,421 [salt.state       :1951][INFO    ][26952] Completed state [python-pycadf] at time 06:32:32.421428 duration_in_ms=9.284
2019-11-21 06:32:32,423 [salt.state       :1780][INFO    ][26952] Running state [/etc/glance/glance-cache.conf] at time 06:32:32.423820
2019-11-21 06:32:32,424 [salt.state       :1813][INFO    ][26952] Executing state file.managed for [/etc/glance/glance-cache.conf]
2019-11-21 06:32:32,457 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'glance/files/rocky/glance-cache.conf.Debian'
2019-11-21 06:32:32,564 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2019-11-21 06:32:32,589 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2019-11-21 06:32:32,621 [salt.state       :300 ][INFO    ][26952] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -28,44 +29,11 @@
 #  (boolean value)
 #allow_additional_image_properties = true
 
-# "
-# Secure hashing algorithm used for computing the 'os_hash_value' property.
-#
-# This option configures the Glance "multihash", which consists of two
-# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
-# 'os_hash_algo' will be populated by the value of this configuration
-# option, and the 'os_hash_value' will be populated by the hexdigest computed
-# when the algorithm is applied to the uploaded or imported image data.
-#
-# The value must be a valid secure hash algorithm name recognized by the
-# python 'hashlib' library.  You can determine what these are by examining
-# the 'hashlib.algorithms_available' data member of the version of the
-# library being used in your Glance installation.  For interoperability
-# purposes, however, we recommend that you use the set of secure hash
-# names supplied by the 'hashlib.algorithms_guaranteed' data member because
-# those algorithms are guaranteed to be supported by the 'hashlib' library
-# on all platforms.  Thus, any image consumer using 'hashlib' locally should
-# be able to verify the 'os_hash_value' of the image.
-#
-# The default value of 'sha512' is a performant secure hash algorithm.
-#
-# If this option is misconfigured, any attempts to store image data will fail.
-# For that reason, we recommend using the default value.
-#
-# Possible values:
-#     * Any secure hash algorithm name recognized by the Python 'hashlib'
-#       library
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#hashing_algorithm = sha512
-
 #
 # Maximum number of image members per image.
 #
-# This limits the maximum of users an image can be shared with. Any negative
+# This limits the maximum of users an image can be shared with. Any
+# negative
 # value is interpreted as unlimited.
 #
 # Related options:
@@ -77,10 +45,12 @@
 #
 # Maximum number of properties allowed on an image.
 #
-# This enforces an upper limit on the number of additional properties an image
+# This enforces an upper limit on the number of additional properties
+# an image
 # can have. Any negative value is interpreted as unlimited.
 #
-# NOTE: This won't have any impact if additional properties are disabled. Please
+# NOTE: This won't have any impact if additional properties are
+# disabled. Please
 # refer to ``allow_additional_image_properties``.
 #
 # Related options:
@@ -137,7 +107,8 @@
 #
 # Finally, when this configuration option is set to
 # ``glance.db.simple.api``, image catalog data is stored in and read
-# from an in-memory data structure. This is primarily used for testing.
+# from an in-memory data structure. This is primarily used for
+# testing.
 #
 # Related options:
 #     * enable_v2_api
@@ -150,8 +121,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -268,9 +239,10 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
-# Please see the Newton release notes for more information.
+# Reason: This option will be removed in the Pike release or later
+# because the same functionality can be achieved with greater
+# granularity by using policies. Please see the Newton release notes
+# for more information.
 #show_multiple_locations = false
 
 #
@@ -302,18 +274,25 @@
 #
 # Maximum amount of image storage per tenant.
 #
-# This enforces an upper limit on the cumulative storage consumed by all images
+# This enforces an upper limit on the cumulative storage consumed by
+# all images
 # of a tenant across all stores. This is a per-tenant limit.
 #
-# The default unit for this configuration option is Bytes. However, storage
-# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
-# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
-# TeraBytes respectively. Note that there should not be any space between the
-# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# The default unit for this configuration option is Bytes. However,
+# storage
+# units can be specified using case-sensitive literals ``B``, ``KB``,
+# ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes,
+# GigaBytes and
+# TeraBytes respectively. Note that there should not be any space
+# between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative
+# values
 # are invalid and result in errors.
 #
 # Possible values:
-#     * A string that is a valid concatenation of a non-negative integer
+#     * A string that is a valid concatenation of a non-negative
+# integer
 #       representing the storage value and an optional string literal
 #       representing storage units as mentioned above.
 #
@@ -322,6 +301,40 @@
 #
 #  (string value)
 #user_storage_quota = 0
+
+#
+# Deploy the v1 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond to
+# requests on registered endpoints conforming to the v1 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is enabled, then ``enable_v1_registry`` must
+#       also be set to ``True`` to enable mandatory usage of Registry
+#       service with v1 API.
+#
+#     * If this option is disabled, then the ``enable_v1_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+#     * This option is separate from ``enable_v2_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v2 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_registry
+#     * enable_v2_api
+#
+#  (boolean value)
+#enable_v1_api = true
 
 #
 # Deploy the v2 OpenStack Images API.
@@ -335,18 +348,44 @@
 #       option, which is enabled by default, is also recommended
 #       to be disabled.
 #
+#     * This option is separate from ``enable_v1_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v1 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
 # Possible values:
 #     * True
 #     * False
 #
 # Related options:
 #     * enable_v2_registry
+#     * enable_v1_api
 #
 #  (boolean value)
 #enable_v2_api = true
 
 #
-#                     DEPRECATED FOR REMOVAL
+# Deploy the v1 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v1 API requests.
+#
+# NOTES:
+#     * Use of Registry is mandatory in v1 API, so this option must
+#       be set to ``True`` if the ``enable_v1_api`` option is enabled.
+#
+#     * If deploying only the v2 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_api
+#
 #  (boolean value)
 #enable_v1_registry = true
 
@@ -380,8 +419,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -399,7 +438,7 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -486,26 +525,55 @@
 #
 # Related options:
 #     * [task]/work_dir
+#     * [DEFAULT]/enable_image_import (*deprecated*)
 #
 #  (string value)
 #node_staging_uri = file:///tmp/staging/
 
+# DEPRECATED:
+# Enables the Image Import workflow introduced in Pike
+#
+# As '[DEFAULT]/node_staging_uri' is required for the Image
+# Import, it's disabled per default in Pike, enabled per
+# default in Queens and removed in Rocky. This allows Glance to
+# operate with previous version configs upon upgrade.
+#
+# Setting this option to False will disable the endpoints related
+# to Image Import Refactoring work.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (boolean value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated for removal in Rocky.
+#
+# It was introduced to make sure that the API is not enabled
+# before the '[DEFAULT]/node_staging_uri' is defined and is
+# long term redundant.
+#enable_image_import = true
+
 #
 # List of enabled Image Import Methods
 #
 # Both 'glance-direct' and 'web-download' are enabled by default.
 #
 # Related options:
-#     * [DEFAULT]/node_staging_uri (list value)
-#enabled_import_methods = [glance-direct,web-download]
-
-#
-# The relative path to sqlite file database that will be used for image cache
+#     * [DEFAULT]/node_staging_uri
+#     * [DEFAULT]/enable_image_import (list value)
+#enabled_import_methods = glance-direct,web-download
+
+#
+# The relative path to sqlite file database that will be used for
+# image cache
 # management.
 #
-# This is a relative path to the sqlite file database that tracks the age and
-# usage statistics of image cache. The path is relative to image cache base
-# directory, specified by the configuration option ``image_cache_dir``.
+# This is a relative path to the sqlite file database that tracks the
+# age and
+# usage statistics of image cache. The path is relative to image cache
+# base
+# directory, specified by the configuration option
+# ``image_cache_dir``.
 #
 # This is a lightweight database with just one table.
 #
@@ -521,23 +589,33 @@
 #
 # The driver to use for image cache management.
 #
-# This configuration option provides the flexibility to choose between the
-# different image-cache drivers available. An image-cache driver is responsible
-# for providing the essential functions of image-cache like write images to/read
-# images from cache, track age and usage of cached images, provide a list of
-# cached images, fetch size of the cache, queue images for caching and clean up
+# This configuration option provides the flexibility to choose between
+# the
+# different image-cache drivers available. An image-cache driver is
+# responsible
+# for providing the essential functions of image-cache like write
+# images to/read
+# images from cache, track age and usage of cached images, provide a
+# list of
+# cached images, fetch size of the cache, queue images for caching and
+# clean up
 # the cache, etc.
 #
 # The essential functions of a driver are defined in the base class
-# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers (existing
-# and prospective) must implement this interface. Currently available drivers
-# are ``sqlite`` and ``xattr``. These drivers primarily differ in the way they
+# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers
+# (existing
+# and prospective) must implement this interface. Currently available
+# drivers
+# are ``sqlite`` and ``xattr``. These drivers primarily differ in the
+# way they
 # store the information about cached images:
-#     * The ``sqlite`` driver uses a sqlite database (which sits on every glance
+#     * The ``sqlite`` driver uses a sqlite database (which sits on
+# every glance
 #     node locally) to track the usage of cached images.
-#     * The ``xattr`` driver uses the extended attributes of files to store this
-#     information. It also requires a filesystem that sets ``atime`` on the
-# files
+#     * The ``xattr`` driver uses the extended attributes of files to
+# store this
+#     information. It also requires a filesystem that sets ``atime``
+# on the files
 #     when accessed.
 #
 # Possible values:
@@ -554,21 +632,32 @@
 #image_cache_driver = sqlite
 
 #
-# The upper limit on cache size, in bytes, after which the cache-pruner cleans
+# The upper limit on cache size, in bytes, after which the cache-
+# pruner cleans
 # up the image cache.
 #
-# NOTE: This is just a threshold for cache-pruner to act upon. It is NOT a
-# hard limit beyond which the image cache would never grow. In fact, depending
-# on how often the cache-pruner runs and how quickly the cache fills, the image
-# cache can far exceed the size specified here very easily. Hence, care must be
-# taken to appropriately schedule the cache-pruner and in setting this limit.
-#
-# Glance caches an image when it is downloaded. Consequently, the size of the
-# image cache grows over time as the number of downloads increases. To keep the
+# NOTE: This is just a threshold for cache-pruner to act upon. It is
+# NOT a
+# hard limit beyond which the image cache would never grow. In fact,
+# depending
+# on how often the cache-pruner runs and how quickly the cache fills,
+# the image
+# cache can far exceed the size specified here very easily. Hence,
+# care must be
+# taken to appropriately schedule the cache-pruner and in setting this
+# limit.
+#
+# Glance caches an image when it is downloaded. Consequently, the size
+# of the
+# image cache grows over time as the number of downloads increases. To
+# keep the
 # cache size from becoming unmanageable, it is recommended to run the
-# cache-pruner as a periodic task. When the cache pruner is kicked off, it
-# compares the current size of image cache and triggers a cleanup if the image
-# cache grew beyond the size specified here. After the cleanup, the size of
+# cache-pruner as a periodic task. When the cache pruner is kicked
+# off, it
+# compares the current size of image cache and triggers a cleanup if
+# the image
+# cache grew beyond the size specified here. After the cleanup, the
+# size of
 # cache is less than or equal to size specified here.
 #
 # Possible values:
@@ -581,19 +670,36 @@
 # Minimum value: 0
 #image_cache_max_size = 10737418240
 
-#
-# The amount of time, in seconds, an incomplete image remains in the cache.
-#
-# Incomplete images are images for which download is in progress. Please see the
-# description of configuration option ``image_cache_dir`` for more detail.
-# Sometimes, due to various reasons, it is possible the download may hang and
-# the incompletely downloaded image remains in the ``incomplete`` directory.
-# This configuration option sets a time limit on how long the incomplete images
-# should remain in the ``incomplete`` directory before they are cleaned up.
-# Once an incomplete image spends more time than is specified here, it'll be
+image_cache_max_size = 10737418240
+image_cache_stall_time = 86400
+image_cache_dir = /var/lib/glance/image-cache/
+
+
+os_region_name = RegionOne
+
+
+#
+# The amount of time, in seconds, an incomplete image remains in the
+# cache.
+#
+# Incomplete images are images for which download is in progress.
+# Please see the
+# description of configuration option ``image_cache_dir`` for more
+# detail.
+# Sometimes, due to various reasons, it is possible the download may
+# hang and
+# the incompletely downloaded image remains in the ``incomplete``
+# directory.
+# This configuration option sets a time limit on how long the
+# incomplete images
+# should remain in the ``incomplete`` directory before they are
+# cleaned up.
+# Once an incomplete image spends more time than is specified here,
+# it'll be
 # removed by cache-cleaner on its next run.
 #
-# It is recommended to run cache-cleaner as a periodic task on the Glance API
+# It is recommended to run cache-cleaner as a periodic task on the
+# Glance API
 # nodes to keep the incomplete images from occupying disk space.
 #
 # Possible values:
@@ -609,25 +715,39 @@
 #
 # Base directory for image cache.
 #
-# This is the location where image data is cached and served out of. All cached
-# images are stored directly under this directory. This directory also contains
-# three subdirectories, namely, ``incomplete``, ``invalid`` and ``queue``.
-#
-# The ``incomplete`` subdirectory is the staging area for downloading images. An
-# image is first downloaded to this directory. When the image download is
-# successful it is moved to the base directory. However, if the download fails,
-# the partially downloaded image file is moved to the ``invalid`` subdirectory.
-#
-# The ``queue``subdirectory is used for queuing images for download. This is
-# used primarily by the cache-prefetcher, which can be scheduled as a periodic
-# task like cache-pruner and cache-cleaner, to cache images ahead of their
-# usage.
-# Upon receiving the request to cache an image, Glance touches a file in the
-# ``queue`` directory with the image id as the file name. The cache-prefetcher,
+# This is the location where image data is cached and served out of.
+# All cached
+# images are stored directly under this directory. This directory also
+# contains
+# three subdirectories, namely, ``incomplete``, ``invalid`` and
+# ``queue``.
+#
+# The ``incomplete`` subdirectory is the staging area for downloading
+# images. An
+# image is first downloaded to this directory. When the image download
+# is
+# successful it is moved to the base directory. However, if the
+# download fails,
+# the partially downloaded image file is moved to the ``invalid``
+# subdirectory.
+#
+# The ``queue``subdirectory is used for queuing images for download.
+# This is
+# used primarily by the cache-prefetcher, which can be scheduled as a
+# periodic
+# task like cache-pruner and cache-cleaner, to cache images ahead of
+# their usage.
+# Upon receiving the request to cache an image, Glance touches a file
+# in the
+# ``queue`` directory with the image id as the file name. The cache-
+# prefetcher,
 # when running, polls for the files in ``queue`` directory and starts
-# downloading them in the order they were created. When the download is
-# successful, the zero-sized file is deleted from the ``queue`` directory.
-# If the download fails, the zero-sized file remains and it'll be retried the
+# downloading them in the order they were created. When the download
+# is
+# successful, the zero-sized file is deleted from the ``queue``
+# directory.
+# If the download fails, the zero-sized file remains and it'll be
+# retried the
 # next time cache-prefetcher runs.
 #
 # Possible values:
@@ -648,16 +768,16 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
 # Reason:
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
-#registry_host = 0.0.0.0
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
+#registry_host = 172.16.10.36
 
 # DEPRECATED:
 # Port the registry server is listening on.
@@ -677,8 +797,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_port = 9191
 
 # DEPRECATED:
@@ -714,8 +834,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_protocol = http
 
 # DEPRECATED:
@@ -743,8 +863,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_key_file = /etc/ssl/key/key-file.pem
 
 # DEPRECATED:
@@ -773,8 +893,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_cert_file = /etc/ssl/certs/file.crt
 
 # DEPRECATED:
@@ -805,8 +925,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_ca_file = /etc/ssl/cafile/file.ca
 
 # DEPRECATED:
@@ -837,8 +957,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_insecure = false
 
 # DEPRECATED:
@@ -865,204 +985,210 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_timeout = 600
 
-# DEPRECATED: Whether to pass through the user token when making requests to the
-# registry. To prevent failures with token expiration during big files upload,
-# it is recommended to set this parameter to False.If "use_user_token" is not in
-# effect, then admin credentials can be specified. (boolean value)
+# DEPRECATED: Whether to pass through the user token when making
+# requests to the registry. To prevent failures with token expiration
+# during big files upload, it is recommended to set this parameter to
+# False.If "use_user_token" is not in effect, then admin credentials
+# can be specified. (boolean value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #use_user_token = true
 
-# DEPRECATED: The administrators user name. If "use_user_token" is not in
-# effect, then admin credentials can be specified. (string value)
+# DEPRECATED: The administrators user name. If "use_user_token" is not
+# in effect, then admin credentials can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_user = <None>
 
-# DEPRECATED: The administrators password. If "use_user_token" is not in effect,
-# then admin credentials can be specified. (string value)
+# DEPRECATED: The administrators password. If "use_user_token" is not
+# in effect, then admin credentials can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_password = <None>
 
-# DEPRECATED: The tenant name of the administrative user. If "use_user_token" is
-# not in effect, then admin tenant name can be specified. (string value)
+# DEPRECATED: The tenant name of the administrative user. If
+# "use_user_token" is not in effect, then admin tenant name can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_tenant_name = <None>
 
-# DEPRECATED: The URL to the keystone service. If "use_user_token" is not in
-# effect and using keystone auth, then URL of keystone can be specified. (string
-# value)
+# DEPRECATED: The URL to the keystone service. If "use_user_token" is
+# not in effect and using keystone auth, then URL of keystone can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_url = <None>
 
-# DEPRECATED: The strategy to use for authentication. If "use_user_token" is not
-# in effect, then auth strategy can be specified. (string value)
+# DEPRECATED: The strategy to use for authentication. If
+# "use_user_token" is not in effect, then auth strategy can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_strategy = noauth
 
-# DEPRECATED: The region for the authentication service. If "use_user_token" is
-# not in effect and using keystone auth, then region name can be specified.
-# (string value)
+# DEPRECATED: The region for the authentication service. If
+# "use_user_token" is not in effect and using keystone auth, then
+# region name can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_region = <None>
-
 #
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+log_file = /var/log/glance/image-cache.log
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
 #watch_log_file = false
 
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
 # value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message is
-# DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
-
 [glance_store]
 
 #
 # From glance.store
 #
 
-# DEPRECATED:
+#
 # List of enabled Glance stores.
 #
 # Register the storage backends to use for storing disk images
@@ -1083,18 +1209,9 @@
 #     * default_store
 #
 #  (list value)
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``enabled_backends`` which helps to configure multiple backend stores
-# of different schemes.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #stores = file,http
 
-# DEPRECATED:
+#
 # The default scheme to use for storing images.
 #
 # Provide a string value representing the default scheme to use for
@@ -1136,18 +1253,9 @@
 # sheepdog - <No description provided>
 # cinder - <No description provided>
 # vsphere - <No description provided>
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``default_backend`` which acts similar to ``default_store`` config
-# option.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #default_store = file
 
-# DEPRECATED:
+#
 # Minimum interval in seconds to execute updating dynamic storage
 # capabilities based on current backend status.
 #
@@ -1162,19 +1270,14 @@
 # By default, this option is set to zero and is disabled. Provide an
 # integer value greater than zero to enable this option.
 #
-# NOTE 1: For more information on store capabilities and their updates,
-# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
-# /store-capabilities.html
+# NOTE: For more information on store capabilities and their updates,
+# please visit: https://specs.openstack.org/openstack/glance-
+# specs/specs/kilo/store-capabilities.html
 #
 # For more information on setting up a particular store in your
 # deployment and help with the usage of this feature, please contact
 # the storage driver maintainers listed here:
-# https://docs.openstack.org/glance_store/latest/user/drivers.html
-#
-# NOTE 2: The dynamic store update capability described above is not
-# implemented by any current store drivers.  Thus, this option DOES
-# NOT DO ANYTHING (and it never has).  It is DEPRECATED and scheduled
-# for removal early in the Stein development cycle.
+# http://docs.openstack.org/developer/glance_store/drivers/index.html
 #
 # Possible values:
 #     * Zero
@@ -1185,15 +1288,6 @@
 #
 #  (integer value)
 # Minimum value: 0
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option configures a stub method that has not been implemented
-# for any existing store drivers.  Hence it is non-operational, and
-# giving it a value does absolutely nothing.
-#
-# This option is scheduled for removal early in the Stein development
-# cycle.
 #store_capabilities_update_min_interval = 0
 
 #
@@ -1202,16 +1296,20 @@
 # When the ``cinder_endpoint_template`` is not set and any of
 # ``cinder_store_auth_address``, ``cinder_store_user_name``,
 # ``cinder_store_project_name``, ``cinder_store_password`` is not set,
-# cinder store uses this information to lookup cinder endpoint from the service
-# catalog in the current context. ``cinder_os_region_name``, if set, is taken
+# cinder store uses this information to lookup cinder endpoint from
+# the service
+# catalog in the current context. ``cinder_os_region_name``, if set,
+# is taken
 # into consideration to fetch the appropriate endpoint.
 #
-# The service catalog can be listed by the ``openstack catalog list`` command.
+# The service catalog can be listed by the ``openstack catalog list``
+# command.
 #
 # Possible values:
 #     * A string of of the following form:
 #       ``<service_type>:<service_name>:<interface>``
-#       At least ``service_type`` and ``interface`` should be specified.
+#       At least ``service_type`` and ``interface`` should be
+# specified.
 #       ``service_name`` can be omitted.
 #
 # Related options:
@@ -1228,18 +1326,22 @@
 #
 # Override service catalog lookup with template for cinder endpoint.
 #
-# When this option is set, this value is used to generate cinder endpoint,
+# When this option is set, this value is used to generate cinder
+# endpoint,
 # instead of looking up from the service catalog.
 # This value is ignored if ``cinder_store_auth_address``,
 # ``cinder_store_user_name``, ``cinder_store_project_name``, and
 # ``cinder_store_password`` are specified.
 #
-# If this configuration option is set, ``cinder_catalog_info`` will be ignored.
-#
-# Possible values:
-#     * URL template string for cinder endpoint, where ``%%(tenant)s`` is
+# If this configuration option is set, ``cinder_catalog_info`` will be
+# ignored.
+#
+# Possible values:
+#     * URL template string for cinder endpoint, where ``%%(tenant)s``
+# is
 #       replaced with the current tenant (project) name.
-#       For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s``
+#       For example:
+# ``http://cinder.openstack.example.org/v2/%%(tenant)s``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -1254,10 +1356,14 @@
 #
 # Region name to lookup cinder service from the service catalog.
 #
-# This is used only when ``cinder_catalog_info`` is used for determining the
-# endpoint. If set, the lookup for cinder endpoint by this node is filtered to
-# the specified region. It is useful when multiple regions are listed in the
-# catalog. If this is not set, the endpoint is looked up from every region.
+# This is used only when ``cinder_catalog_info`` is used for
+# determining the
+# endpoint. If set, the lookup for cinder endpoint by this node is
+# filtered to
+# the specified region. It is useful when multiple regions are listed
+# in the
+# catalog. If this is not set, the endpoint is looked up from every
+# region.
 #
 # Possible values:
 #     * A string that is a valid region name.
@@ -1273,9 +1379,10 @@
 # Location of a CA certificates file used for cinder client requests.
 #
 # The specified CA certificates file, if set, is used to verify cinder
-# connections via HTTPS endpoint. If the endpoint is HTTP, this value is
-# ignored.
-# ``cinder_api_insecure`` must be set to ``True`` to enable the verification.
+# connections via HTTPS endpoint. If the endpoint is HTTP, this value
+# is ignored.
+# ``cinder_api_insecure`` must be set to ``True`` to enable the
+# verification.
 #
 # Possible values:
 #     * Path to a ca certificates file
@@ -1289,7 +1396,8 @@
 #
 # Number of cinderclient retries on failed http calls.
 #
-# When a call failed by any errors, cinderclient will retry the call up to the
+# When a call failed by any errors, cinderclient will retry the call
+# up to the
 # specified times after sleeping a few seconds.
 #
 # Possible values:
@@ -1306,11 +1414,16 @@
 # Time period, in seconds, to wait for a cinder volume transition to
 # complete.
 #
-# When the cinder volume is created, deleted, or attached to the glance node to
-# read/write the volume data, the volume's state is changed. For example, the
-# newly created volume status changes from ``creating`` to ``available`` after
-# the creation process is completed. This specifies the maximum time to wait for
-# the status change. If a timeout occurs while waiting, or the status is changed
+# When the cinder volume is created, deleted, or attached to the
+# glance node to
+# read/write the volume data, the volume's state is changed. For
+# example, the
+# newly created volume status changes from ``creating`` to
+# ``available`` after
+# the creation process is completed. This specifies the maximum time
+# to wait for
+# the status change. If a timeout occurs while waiting, or the status
+# is changed
 # to an unexpected value (e.g. `error``), the image creation fails.
 #
 # Possible values:
@@ -1326,8 +1439,10 @@
 #
 # Allow to perform insecure SSL requests to cinder.
 #
-# If this option is set to True, HTTPS endpoint connection is verified using the
-# CA certificates file specified by ``cinder_ca_certificates_file`` option.
+# If this option is set to True, HTTPS endpoint connection is verified
+# using the
+# CA certificates file specified by ``cinder_ca_certificates_file``
+# option.
 #
 # Possible values:
 #     * True
@@ -1342,15 +1457,23 @@
 #
 # The address where the cinder authentication service is listening.
 #
-# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``,
-# ``cinder_store_project_name``, and ``cinder_store_password`` options are
-# specified, the specified values are always used for the authentication.
-# This is useful to hide the image volumes from users by storing them in a
-# project/tenant specific to the image service. It also enables users to share
-# the image volume among other projects under the control of glance's ACL.
-#
-# If either of these options are not set, the cinder endpoint is looked up
-# from the service catalog, and current context's user and project are used.
+# When all of ``cinder_store_auth_address``,
+# ``cinder_store_user_name``,
+# ``cinder_store_project_name``, and ``cinder_store_password`` options
+# are
+# specified, the specified values are always used for the
+# authentication.
+# This is useful to hide the image volumes from users by storing them
+# in a
+# project/tenant specific to the image service. It also enables users
+# to share
+# the image volume among other projects under the control of glance's
+# ACL.
+#
+# If either of these options are not set, the cinder endpoint is
+# looked up
+# from the service catalog, and current context's user and project are
+# used.
 #
 # Possible values:
 #     * A valid authentication service address, for example:
@@ -1367,7 +1490,8 @@
 #
 # User name to authenticate against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
@@ -1384,11 +1508,13 @@
 #
 # Password for the user authenticating against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
-#     * A valid password for the user specified by ``cinder_store_user_name``
+#     * A valid password for the user specified by
+# ``cinder_store_user_name``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -1401,10 +1527,12 @@
 #
 # Project name where the image volume is stored in cinder.
 #
-# If this configuration option is not set, the project in current context is
+# If this configuration option is not set, the project in current
+# context is
 # used.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the project of the current context is used.
 #
 # Possible values:
@@ -1419,11 +1547,15 @@
 #cinder_store_project_name = <None>
 
 #
-# Path to the rootwrap configuration file to use for running commands as root.
-#
-# The cinder store requires root privileges to operate the image volumes (for
-# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.).
-# The configuration file should allow the required commands by cinder store and
+# Path to the rootwrap configuration file to use for running commands
+# as root.
+#
+# The cinder store requires root privileges to operate the image
+# volumes (for
+# connecting to iSCSI/FC volumes and reading/writing the volume data,
+# etc.).
+# The configuration file should allow the required commands by cinder
+# store and
 # os-brick library.
 #
 # Possible values:
@@ -1438,11 +1570,14 @@
 #
 # Volume type that will be used for volume creation in cinder.
 #
-# Some cinder backends can have several volume types to optimize storage usage.
-# Adding this option allows an operator to choose a specific volume type
+# Some cinder backends can have several volume types to optimize
+# storage usage.
+# Adding this option allows an operator to choose a specific volume
+# type
 # in cinder that can be optimized for images.
 #
-# If this is not set, then the default volume type specified in the cinder
+# If this is not set, then the default volume type specified in the
+# cinder
 # configuration will be used for volume creation.
 #
 # Possible values:
@@ -1497,7 +1632,7 @@
 #
 # More information on configuring filesystem store with multiple store
 # directories can be found at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # NOTE: This directory is used only when filesystem store is used as a
 # storage backend. Either ``filesystem_store_datadir`` or
@@ -1538,8 +1673,10 @@
 #
 # File access permissions for the image files.
 #
-# Set the intended file access permissions for image data. This provides
-# a way to enable other services, e.g. Nova, to consume images directly
+# Set the intended file access permissions for image data. This
+# provides
+# a way to enable other services, e.g. Nova, to consume images
+# directly
 # from the filesystem store. The users running the services that are
 # intended to be given access to could be made a member of the group
 # that owns the files created. Assigning a value less then or equal to
@@ -1548,7 +1685,7 @@
 # digit.
 #
 # For more information, please refer the documentation at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # Possible values:
 #     * A valid file access permission
@@ -1565,8 +1702,10 @@
 # Path to the CA bundle file.
 #
 # This configuration option enables the operator to use a custom
-# Certificate Authority file to verify the remote server certificate. If
-# this option is set, the ``https_insecure`` option will be ignored and
+# Certificate Authority file to verify the remote server certificate.
+# If
+# this option is set, the ``https_insecure`` option will be ignored
+# and
 # the CA file specified will be used to authenticate the server
 # certificate and establish a secure connection to the server.
 #
@@ -1584,8 +1723,10 @@
 #
 # This configuration option takes in a boolean value to determine
 # whether or not to verify the remote server certificate. If set to
-# True, the remote server certificate is not verified. If the option is
-# set to False, then the default CA truststore is used for verification.
+# True, the remote server certificate is not verified. If the option
+# is
+# set to False, then the default CA truststore is used for
+# verification.
 #
 # This option is ignored if ``https_ca_certificates_file`` is set.
 # The remote server certificate will then be verified using the file
@@ -1608,12 +1749,14 @@
 # This configuration option specifies the http/https proxy information
 # that should be used to connect to the remote server. The proxy
 # information should be a key value pair of the scheme and proxy, for
-# example, http:10.0.0.1:3128. You can also specify proxies for multiple
+# example, http:10.0.0.1:3128. You can also specify proxies for
+# multiple
 # schemes by separating the key value pairs with a comma, for example,
 # http:10.0.0.1:3128, https:10.0.0.1:1080.
 #
 # Possible values:
-#     * A comma separated list of scheme:proxy pairs as described above
+#     * A comma separated list of scheme:proxy pairs as described
+# above
 #
 # Related options:
 #     * None
@@ -1625,11 +1768,13 @@
 # Size, in megabytes, to chunk RADOS images into.
 #
 # Provide an integer value representing the size in megabytes to chunk
-# Glance images into. The default chunk size is 8 megabytes. For optimal
+# Glance images into. The default chunk size is 8 megabytes. For
+# optimal
 # performance, the value should be a power of two.
 #
 # When Ceph's RBD object storage system is used as the storage backend
-# for storing Glance images, the images are chunked into objects of the
+# for storing Glance images, the images are chunked into objects of
+# the
 # size set using this option. These chunked objects are then stored
 # across the distributed block data store to use for Glance.
 #
@@ -1646,8 +1791,10 @@
 #
 # RADOS pool in which images are stored.
 #
-# When RBD is used as the storage backend for storing Glance images, the
-# images are stored by means of logical grouping of the objects (chunks
+# When RBD is used as the storage backend for storing Glance images,
+# the
+# images are stored by means of logical grouping of the objects
+# (chunks
 # of images) into a ``pool``. Each pool is defined with the number of
 # placement groups it can contain. The default pool that is used is
 # 'images'.
@@ -1667,7 +1814,8 @@
 #
 # RADOS user to authenticate as.
 #
-# This configuration option takes in the RADOS user to authenticate as.
+# This configuration option takes in the RADOS user to authenticate
+# as.
 # This is only needed when RADOS authentication is enabled and is
 # applicable only if the user is using Cephx authentication. If the
 # value for this option is not set by the user or is set to None, a
@@ -1686,9 +1834,11 @@
 #
 # Ceph configuration file path.
 #
-# This configuration option takes in the path to the Ceph configuration
+# This configuration option takes in the path to the Ceph
+# configuration
 # file to be used. If the value for this option is not set by the user
-# or is set to None, librados will locate the default configuration file
+# or is set to None, librados will locate the default configuration
+# file
 # which is located at /etc/ceph/ceph.conf. If using Cephx
 # authentication, this file should include a reference to the right
 # keyring in a client.<USER> section
@@ -1706,7 +1856,8 @@
 # Timeout value for connecting to Ceph cluster.
 #
 # This configuration option takes in the timeout value in seconds used
-# when connecting to the Ceph cluster i.e. it sets the time to wait for
+# when connecting to the Ceph cluster i.e. it sets the time to wait
+# for
 # glance-api before closing the connection. This prevents glance-api
 # hangups during the connection to RBD. If the value for this option
 # is set to less than or equal to 0, no timeout is set and the default
@@ -1790,7 +1941,7 @@
 # Related Options:
 #     * sheepdog_store_port
 #
-#  (host address value)
+#  (unknown value)
 #sheepdog_store_address = 127.0.0.1
 
 #
@@ -1798,7 +1949,8 @@
 #
 # This boolean determines whether or not to verify the server
 # certificate. If this option is set to True, swiftclient won't check
-# for a valid SSL certificate when authenticating. If the option is set
+# for a valid SSL certificate when authenticating. If the option is
+# set
 # to False, then the default CA truststore is used for verification.
 #
 # Possible values:
@@ -1814,7 +1966,8 @@
 #
 # Path to the CA bundle file.
 #
-# This configuration option enables the operator to specify the path to
+# This configuration option enables the operator to specify the path
+# to
 # a custom Certificate Authority file for SSL verification when
 # connecting to Swift.
 #
@@ -1870,7 +2023,8 @@
 # the container and object to the configured URL.
 #
 # Possible values:
-#     * String value representing a valid URL path up to a Swift container
+#     * String value representing a valid URL path up to a Swift
+# container
 #
 # Related Options:
 #     * None
@@ -1882,9 +2036,12 @@
 # Endpoint Type of Swift service.
 #
 # This string value indicates the endpoint type to use to fetch the
-# Swift endpoint. The endpoint type determines the actions the user will
-# be allowed to perform, for instance, reading and writing to the Store.
-# This setting is only used if swift_store_auth_version is greater than
+# Swift endpoint. The endpoint type determines the actions the user
+# will
+# be allowed to perform, for instance, reading and writing to the
+# Store.
+# This setting is only used if swift_store_auth_version is greater
+# than
 # 1.
 #
 # Possible values:
@@ -1924,32 +2081,46 @@
 #swift_store_service_type = object-store
 
 #
-# Name of single container to store images/name prefix for multiple containers
-#
-# When a single container is being used to store images, this configuration
-# option indicates the container within the Glance account to be used for
-# storing all images. When multiple containers are used to store images, this
+# Name of single container to store images/name prefix for multiple
+# containers
+#
+# When a single container is being used to store images, this
+# configuration
+# option indicates the container within the Glance account to be used
+# for
+# storing all images. When multiple containers are used to store
+# images, this
 # will be the name prefix for all containers. Usage of single/multiple
 # containers can be controlled using the configuration option
 # ``swift_store_multiple_containers_seed``.
 #
-# When using multiple containers, the containers will be named after the value
-# set for this configuration option with the first N chars of the image UUID
+# When using multiple containers, the containers will be named after
+# the value
+# set for this configuration option with the first N chars of the
+# image UUID
 # as the suffix delimited by an underscore (where N is specified by
 # ``swift_store_multiple_containers_seed``).
 #
-# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
-# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
-# the container ``glance_fda``. All dashes in the UUID are included when
-# creating the container name but do not count toward the character limit, so
+# Example: if the seed is set to 3 and swift_store_container =
+# ``glance``, then
+# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be
+# placed in
+# the container ``glance_fda``. All dashes in the UUID are included
+# when
+# creating the container name but do not count toward the character
+# limit, so
 # when N=10 the container name would be ``glance_fdae39a1-ba.``
 #
 # Possible values:
-#     * If using single container, this configuration option can be any string
+#     * If using single container, this configuration option can be
+# any string
 #       that is a valid swift container name in Glance's Swift account
-#     * If using multiple containers, this configuration option can be any
-#       string as long as it satisfies the container naming rules enforced by
-#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
+#     * If using multiple containers, this configuration option can be
+# any
+#       string as long as it satisfies the container naming rules
+# enforced by
+#       Swift. The value of ``swift_store_multiple_containers_seed``
+# should be
 #       taken into account as well.
 #
 # Related options:
@@ -1961,24 +2132,31 @@
 #swift_store_container = glance
 
 #
-# The size threshold, in MB, after which Glance will start segmenting image
-# data.
-#
-# Swift has an upper limit on the size of a single uploaded object. By default,
-# this is 5GB. To upload objects bigger than this limit, objects are segmented
-# into multiple smaller objects that are tied together with a manifest file.
+# The size threshold, in MB, after which Glance will start segmenting
+# image data.
+#
+# Swift has an upper limit on the size of a single uploaded object. By
+# default,
+# this is 5GB. To upload objects bigger than this limit, objects are
+# segmented
+# into multiple smaller objects that are tied together with a manifest
+# file.
 # For more detail, refer to
-# https://docs.openstack.org/swift/latest/overview_large_objects.html
-#
-# This configuration option specifies the size threshold over which the Swift
+# http://docs.openstack.org/developer/swift/overview_large_objects.html
+#
+# This configuration option specifies the size threshold over which
+# the Swift
 # driver will start segmenting image data into multiple smaller files.
-# Currently, the Swift driver only supports creating Dynamic Large Objects.
-#
-# NOTE: This should be set by taking into account the large object limit
+# Currently, the Swift driver only supports creating Dynamic Large
+# Objects.
+#
+# NOTE: This should be set by taking into account the large object
+# limit
 # enforced by the Swift cluster in consideration.
 #
 # Possible values:
-#     * A positive integer that is less than or equal to the large object limit
+#     * A positive integer that is less than or equal to the large
+# object limit
 #       enforced by the Swift cluster in consideration.
 #
 # Related options:
@@ -1989,20 +2167,26 @@
 #swift_store_large_object_size = 5120
 
 #
-# The maximum size, in MB, of the segments when image data is segmented.
-#
-# When image data is segmented to upload images that are larger than the limit
-# enforced by the Swift cluster, image data is broken into segments that are no
+# The maximum size, in MB, of the segments when image data is
+# segmented.
+#
+# When image data is segmented to upload images that are larger than
+# the limit
+# enforced by the Swift cluster, image data is broken into segments
+# that are no
 # bigger than the size specified by this configuration option.
 # Refer to ``swift_store_large_object_size`` for more detail.
 #
 # For example: if ``swift_store_large_object_size`` is 5GB and
-# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
-# segmented into 7 segments where the first six segments will be 1GB in size and
+# ``swift_store_large_object_chunk_size`` is 1GB, an image of size
+# 6.2GB will be
+# segmented into 7 segments where the first six segments will be 1GB
+# in size and
 # the seventh segment will be 0.2GB.
 #
 # Possible values:
-#     * A positive integer that is less than or equal to the large object limit
+#     * A positive integer that is less than or equal to the large
+# object limit
 #       enforced by Swift cluster in consideration.
 #
 # Related options:
@@ -2015,9 +2199,12 @@
 #
 # Create container, if it doesn't already exist, when uploading image.
 #
-# At the time of uploading an image, if the corresponding container doesn't
-# exist, it will be created provided this configuration option is set to True.
-# By default, it won't be created. This behavior is applicable for both single
+# At the time of uploading an image, if the corresponding container
+# doesn't
+# exist, it will be created provided this configuration option is set
+# to True.
+# By default, it won't be created. This behavior is applicable for
+# both single
 # and multiple containers mode.
 #
 # Possible values:
@@ -2033,9 +2220,12 @@
 #
 # Store images in tenant's Swift account.
 #
-# This enables multi-tenant storage mode which causes Glance images to be stored
-# in tenant specific Swift accounts. If this is disabled, Glance stores all
-# images in its own account. More details multi-tenant store can be found at
+# This enables multi-tenant storage mode which causes Glance images to
+# be stored
+# in tenant specific Swift accounts. If this is disabled, Glance
+# stores all
+# images in its own account. More details multi-tenant store can be
+# found at
 # https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
 #
 # NOTE: If using multi-tenant swift store, please make sure
@@ -2055,18 +2245,26 @@
 #
 # Seed indicating the number of containers to use for storing images.
 #
-# When using a single-tenant store, images can be stored in one or more than one
-# containers. When set to 0, all images will be stored in one single container.
-# When set to an integer value between 1 and 32, multiple containers will be
-# used to store images. This configuration option will determine how many
-# containers are created. The total number of containers that will be used is
-# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
+# When using a single-tenant store, images can be stored in one or
+# more than one
+# containers. When set to 0, all images will be stored in one single
+# container.
+# When set to an integer value between 1 and 32, multiple containers
+# will be
+# used to store images. This configuration option will determine how
+# many
+# containers are created. The total number of containers that will be
+# used is
+# equal to 16^N, so if this config option is set to 2, then 16^2=256
+# containers
 # will be used to store images.
 #
-# Please refer to ``swift_store_container`` for more detail on the naming
-# convention. More detail about using multiple containers can be found at
-# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
-# multiple-containers.html
+# Please refer to ``swift_store_container`` for more detail on the
+# naming
+# convention. More detail about using multiple containers can be found
+# at
+# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-
+# store-multiple-containers.html
 #
 # NOTE: This is used only when swift_store_multi_tenant is disabled.
 #
@@ -2091,7 +2289,8 @@
 # default value is an empty list.
 #
 # Possible values:
-#     * A comma separated list of strings representing UUIDs of Keystone
+#     * A comma separated list of strings representing UUIDs of
+# Keystone
 #       projects/tenants
 #
 # Related options:
@@ -2243,30 +2442,34 @@
 #  (string value)
 #default_swift_reference = ref1
 
-# DEPRECATED: Version of the authentication service to use. Valid versions are 2
-# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
+# DEPRECATED: Version of the authentication service to use. Valid
+# versions are 2 and 3 for keystone and 1 (deprecated) for swauth and
+# rackspace. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'auth_version' in the Swift back-end configuration file is
+# The option 'auth_version' in the Swift back-end configuration file
+# is
 # used instead.
 #swift_store_auth_version = 2
 
-# DEPRECATED: The address where the Swift authentication service is listening.
-# (string value)
+# DEPRECATED: The address where the Swift authentication service is
+# listening. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'auth_address' in the Swift back-end configuration file is
+# The option 'auth_address' in the Swift back-end configuration file
+# is
 # used instead.
 #swift_store_auth_address = <None>
 
-# DEPRECATED: The user to authenticate against the Swift authentication service.
-# (string value)
+# DEPRECATED: The user to authenticate against the Swift
+# authentication service. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'user' in the Swift back-end configuration file is set instead.
+# The option 'user' in the Swift back-end configuration file is set
+# instead.
 #swift_store_user = <None>
 
 # DEPRECATED: Auth key for the user authenticating against the Swift
@@ -2327,227 +2530,57 @@
 #  (string value)
 #swift_upload_buffer_dir = <None>
 
-#
-# Address of the ESX/ESXi or vCenter Server target system.
-#
-# This configuration option sets the address of the ESX/ESXi or vCenter
-# Server target system. This option is required when using the VMware
-# storage backend. The address can contain an IP address (127.0.0.1) or
-# a DNS name (www.my-domain.com).
-#
-# Possible Values:
-#     * A valid IPv4 or IPv6 address
-#     * A valid DNS name
-#
-# Related options:
-#     * vmware_server_username
-#     * vmware_server_password
-#
-#  (host address value)
-#vmware_server_host = 127.0.0.1
-
-#
-# Server username.
-#
-# This configuration option takes the username for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is the username for a user with appropriate
-#       privileges
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_password
-#
-#  (string value)
-#vmware_server_username = root
-
-#
-# Server password.
-#
-# This configuration option takes the password for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is a password corresponding to the username
-#       specified using the "vmware_server_username" option
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_username
-#
-#  (string value)
-#vmware_server_password = vmware
-
-#
-# The number of VMware API retries.
-#
-# This configuration option specifies the number of times the VMware
-# ESX/VC server API must be retried upon connection related issues or
-# server API call overload. It is not possible to specify 'retry
-# forever'.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#vmware_api_retry_count = 10
-
-#
-# Interval in seconds used for polling remote tasks invoked on VMware
-# ESX/VC server.
-#
-# This configuration option takes in the sleep time in seconds for polling an
-# on-going async task as part of the VMWare ESX/VC server API call.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#vmware_task_poll_interval = 5
-
-#
-# The directory where the glance images will be stored in the datastore.
-#
-# This configuration option specifies the path to the directory where the
-# glance images will be stored in the VMware datastore. If this option
-# is not set,  the default directory where the glance images are stored
-# is openstack_glance.
-#
-# Possible Values:
-#     * Any string that is a valid path to a directory
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#vmware_store_image_dir = /openstack_glance
-
-#
-# Set verification of the ESX/vCenter server certificate.
-#
-# This configuration option takes a boolean value to determine
-# whether or not to verify the ESX/vCenter server certificate. If this
-# option is set to True, the ESX/vCenter server certificate is not
-# verified. If this option is set to False, then the default CA
-# truststore is used for verification.
-#
-# This option is ignored if the "vmware_ca_file" option is set. In that
-# case, the ESX/vCenter server certificate will then be verified using
-# the file specified using the "vmware_ca_file" option .
-#
-# Possible Values:
-#     * True
-#     * False
-#
-# Related options:
-#     * vmware_ca_file
-#
-#  (boolean value)
-# Deprecated group/name - [glance_store]/vmware_api_insecure
-#vmware_insecure = false
-
-#
-# Absolute path to the CA bundle file.
-#
-# This configuration option enables the operator to use a custom
-# Cerificate Authority File to verify the ESX/vCenter certificate.
-#
-# If this option is set, the "vmware_insecure" option will be ignored
-# and the CA file specified will be used to authenticate the ESX/vCenter
-# server certificate and establish a secure connection to the server.
-#
-# Possible Values:
-#     * Any string that is a valid absolute path to a CA file
-#
-# Related options:
-#     * vmware_insecure
-#
-#  (string value)
-#vmware_ca_file = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The datastores where the image can be stored.
-#
-# This configuration option specifies the datastores where the image can
-# be stored in the VMWare store backend. This option may be specified
-# multiple times for specifying multiple datastores. The datastore name
-# should be specified after its datacenter path, separated by ":". An
-# optional weight may be given after the datastore name, separated again
-# by ":" to specify the priority. Thus, the required format becomes
-# <datacenter_path>:<datastore_name>:<optional_weight>.
-#
-# When adding an image, the datastore with highest weight will be
-# selected, unless there is not enough free space available in cases
-# where the image size is already known. If no weight is given, it is
-# assumed to be zero and the directory will be considered for selection
-# last. If multiple datastores have the same weight, then the one with
-# the most free space available is selected.
-#
-# Possible Values:
-#     * Any string of the format:
-#       <datacenter_path>:<datastore_name>:<optional_weight>
-#
-# Related options:
-#    * None
-#
-#  (multi valued)
-#vmware_datastores =
+
+os_region_name = RegionOne
 
 
 [oslo_policy]
-
 #
 # From oslo.policy
 #
 
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
 #enforce_scope = false
 
 # The file that defines policies. (string value)
 #policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
+policy_file = /etc/glance/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
 #policy_default_rule = default
 
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
 #policy_dirs = policy.d
 
-# Content Type to send and receive data for REST based policy check (string
-# value)
+# Content Type to send and receive data for REST based policy check
+# (string value)
 # Possible values:
 # application/x-www-form-urlencoded - <No description provided>
 # application/json - <No description provided>
 #remote_content_type = application/x-www-form-urlencoded
 
-# server identity verification for REST based policy check (boolean value)
+# server identity verification for REST based policy check (boolean
+# value)
 #remote_ssl_verify_server_crt = false
 
-# Absolute path to ca cert file for REST based policy check (string value)
+# Absolute path to ca cert file for REST based policy check (string
+# value)
 #remote_ssl_ca_crt_file = <None>
 
-# Absolute path to client cert for REST based policy check (string value)
+# Absolute path to client cert for REST based policy check (string
+# value)
 #remote_ssl_client_crt_file = <None>
 
 # Absolute path client key file REST based policy check (string value)
 #remote_ssl_client_key_file = <None>
+

2019-11-21 06:32:32,623 [salt.state       :1951][INFO    ][26952] Completed state [/etc/glance/glance-cache.conf] at time 06:32:32.623241 duration_in_ms=199.419
2019-11-21 06:32:32,626 [salt.state       :1780][INFO    ][26952] Running state [glance_ssl_mysql] at time 06:32:32.626410
2019-11-21 06:32:32,626 [salt.state       :1813][INFO    ][26952] Executing state test.show_notification for [glance_ssl_mysql]
2019-11-21 06:32:32,627 [salt.state       :300 ][INFO    ][26952] Running glance._ssl.mysql
2019-11-21 06:32:32,627 [salt.state       :1951][INFO    ][26952] Completed state [glance_ssl_mysql] at time 06:32:32.627611 duration_in_ms=1.201
2019-11-21 06:32:32,628 [salt.state       :1780][INFO    ][26952] Running state [glance_ssl_rabbitmq] at time 06:32:32.628337
2019-11-21 06:32:32,628 [salt.state       :1813][INFO    ][26952] Executing state test.show_notification for [glance_ssl_rabbitmq]
2019-11-21 06:32:32,629 [salt.state       :300 ][INFO    ][26952] Running glance._ssl.rabbitmq
2019-11-21 06:32:32,629 [salt.state       :1951][INFO    ][26952] Completed state [glance_ssl_rabbitmq] at time 06:32:32.629600 duration_in_ms=1.263
2019-11-21 06:32:32,630 [salt.state       :1780][INFO    ][26952] Running state [/etc/glance/glance-registry.conf] at time 06:32:32.630774
2019-11-21 06:32:32,631 [salt.state       :1813][INFO    ][26952] Executing state file.managed for [/etc/glance/glance-registry.conf]
2019-11-21 06:32:32,651 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'glance/files/rocky/glance-registry.conf.Debian'
2019-11-21 06:32:32,735 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2019-11-21 06:32:32,770 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2019-11-21 06:32:32,798 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2019-11-21 06:32:32,835 [salt.state       :300 ][INFO    ][26952] File changed:
--- 
+++ 
@@ -1,16 +1,20 @@
+
 [DEFAULT]
 
 #
 # From glance.registry
 #
 
-# DEPRECATED:
+#
 # Set the image owner to tenant or the authenticated user.
 #
-# Assign a boolean value to determine the owner of an image. When set to
+# Assign a boolean value to determine the owner of an image. When set
+# to
 # True, the owner of the image is the tenant. When set to False, the
-# owner of the image will be the authenticated user issuing the request.
-# Setting it to False makes the image private to the associated user and
+# owner of the image will be the authenticated user issuing the
+# request.
+# Setting it to False makes the image private to the associated user
+# and
 # sharing with other users within the same tenant (or "project")
 # requires explicit image sharing via image membership.
 #
@@ -22,15 +26,6 @@
 #     * None
 #
 #  (boolean value)
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# The non-default setting for this option misaligns Glance with other
-# OpenStack services with respect to resource ownership.  Further, surveys
-# indicate that this option is not used by operators.  The option will be
-# removed early in the 'S' development cycle following the standard OpenStack
-# deprecation policy.  As the option is not in wide use, no migration path is
-# proposed.
 #owner_is_tenant = true
 
 #
@@ -74,7 +69,8 @@
 #
 # Provide  an integer value to limit the length of the request ID to
 # the specified length. The default value is 64. Users can change this
-# to any ineteger value between 0 and 16384 however keeping in mind that
+# to any ineteger value between 0 and 16384 however keeping in mind
+# that
 # a larger value may flood the logs.
 #
 # Possible values:
@@ -111,44 +107,11 @@
 #  (boolean value)
 #allow_additional_image_properties = true
 
-# "
-# Secure hashing algorithm used for computing the 'os_hash_value' property.
-#
-# This option configures the Glance "multihash", which consists of two
-# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
-# 'os_hash_algo' will be populated by the value of this configuration
-# option, and the 'os_hash_value' will be populated by the hexdigest computed
-# when the algorithm is applied to the uploaded or imported image data.
-#
-# The value must be a valid secure hash algorithm name recognized by the
-# python 'hashlib' library.  You can determine what these are by examining
-# the 'hashlib.algorithms_available' data member of the version of the
-# library being used in your Glance installation.  For interoperability
-# purposes, however, we recommend that you use the set of secure hash
-# names supplied by the 'hashlib.algorithms_guaranteed' data member because
-# those algorithms are guaranteed to be supported by the 'hashlib' library
-# on all platforms.  Thus, any image consumer using 'hashlib' locally should
-# be able to verify the 'os_hash_value' of the image.
-#
-# The default value of 'sha512' is a performant secure hash algorithm.
-#
-# If this option is misconfigured, any attempts to store image data will fail.
-# For that reason, we recommend using the default value.
-#
-# Possible values:
-#     * Any secure hash algorithm name recognized by the Python 'hashlib'
-#       library
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#hashing_algorithm = sha512
-
 #
 # Maximum number of image members per image.
 #
-# This limits the maximum of users an image can be shared with. Any negative
+# This limits the maximum of users an image can be shared with. Any
+# negative
 # value is interpreted as unlimited.
 #
 # Related options:
@@ -160,10 +123,12 @@
 #
 # Maximum number of properties allowed on an image.
 #
-# This enforces an upper limit on the number of additional properties an image
+# This enforces an upper limit on the number of additional properties
+# an image
 # can have. Any negative value is interpreted as unlimited.
 #
-# NOTE: This won't have any impact if additional properties are disabled. Please
+# NOTE: This won't have any impact if additional properties are
+# disabled. Please
 # refer to ``allow_additional_image_properties``.
 #
 # Related options:
@@ -220,7 +185,8 @@
 #
 # Finally, when this configuration option is set to
 # ``glance.db.simple.api``, image catalog data is stored in and read
-# from an in-memory data structure. This is primarily used for testing.
+# from an in-memory data structure. This is primarily used for
+# testing.
 #
 # Related options:
 #     * enable_v2_api
@@ -233,8 +199,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -351,9 +317,10 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
-# Please see the Newton release notes for more information.
+# Reason: This option will be removed in the Pike release or later
+# because the same functionality can be achieved with greater
+# granularity by using policies. Please see the Newton release notes
+# for more information.
 #show_multiple_locations = false
 
 #
@@ -385,18 +352,25 @@
 #
 # Maximum amount of image storage per tenant.
 #
-# This enforces an upper limit on the cumulative storage consumed by all images
+# This enforces an upper limit on the cumulative storage consumed by
+# all images
 # of a tenant across all stores. This is a per-tenant limit.
 #
-# The default unit for this configuration option is Bytes. However, storage
-# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
-# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
-# TeraBytes respectively. Note that there should not be any space between the
-# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# The default unit for this configuration option is Bytes. However,
+# storage
+# units can be specified using case-sensitive literals ``B``, ``KB``,
+# ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes,
+# GigaBytes and
+# TeraBytes respectively. Note that there should not be any space
+# between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative
+# values
 # are invalid and result in errors.
 #
 # Possible values:
-#     * A string that is a valid concatenation of a non-negative integer
+#     * A string that is a valid concatenation of a non-negative
+# integer
 #       representing the storage value and an optional string literal
 #       representing storage units as mentioned above.
 #
@@ -405,6 +379,40 @@
 #
 #  (string value)
 #user_storage_quota = 0
+
+#
+# Deploy the v1 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond to
+# requests on registered endpoints conforming to the v1 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is enabled, then ``enable_v1_registry`` must
+#       also be set to ``True`` to enable mandatory usage of Registry
+#       service with v1 API.
+#
+#     * If this option is disabled, then the ``enable_v1_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+#     * This option is separate from ``enable_v2_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v2 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_registry
+#     * enable_v2_api
+#
+#  (boolean value)
+#enable_v1_api = true
 
 #
 # Deploy the v2 OpenStack Images API.
@@ -418,18 +426,44 @@
 #       option, which is enabled by default, is also recommended
 #       to be disabled.
 #
+#     * This option is separate from ``enable_v1_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v1 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
 # Possible values:
 #     * True
 #     * False
 #
 # Related options:
 #     * enable_v2_registry
+#     * enable_v1_api
 #
 #  (boolean value)
 #enable_v2_api = true
 
 #
-#                     DEPRECATED FOR REMOVAL
+# Deploy the v1 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v1 API requests.
+#
+# NOTES:
+#     * Use of Registry is mandatory in v1 API, so this option must
+#       be set to ``True`` if the ``enable_v1_api`` option is enabled.
+#
+#     * If deploying only the v2 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_api
+#
 #  (boolean value)
 #enable_v1_registry = true
 
@@ -463,8 +497,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -482,7 +516,7 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -569,18 +603,43 @@
 #
 # Related options:
 #     * [task]/work_dir
+#     * [DEFAULT]/enable_image_import (*deprecated*)
 #
 #  (string value)
 #node_staging_uri = file:///tmp/staging/
 
+# DEPRECATED:
+# Enables the Image Import workflow introduced in Pike
+#
+# As '[DEFAULT]/node_staging_uri' is required for the Image
+# Import, it's disabled per default in Pike, enabled per
+# default in Queens and removed in Rocky. This allows Glance to
+# operate with previous version configs upon upgrade.
+#
+# Setting this option to False will disable the endpoints related
+# to Image Import Refactoring work.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (boolean value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated for removal in Rocky.
+#
+# It was introduced to make sure that the API is not enabled
+# before the '[DEFAULT]/node_staging_uri' is defined and is
+# long term redundant.
+#enable_image_import = true
+
 #
 # List of enabled Image Import Methods
 #
 # Both 'glance-direct' and 'web-download' are enabled by default.
 #
 # Related options:
-#     * [DEFAULT]/node_staging_uri (list value)
-#enabled_import_methods = [glance-direct,web-download]
+#     * [DEFAULT]/node_staging_uri
+#     * [DEFAULT]/enable_image_import (list value)
+#enabled_import_methods = glance-direct,web-download
 
 #
 # IP address to bind the glance servers to.
@@ -599,8 +658,9 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #bind_host = 0.0.0.0
+bind_host = 172.16.10.36
 
 #
 # Port number on which the server will listen.
@@ -620,6 +680,7 @@
 # Minimum value: 0
 # Maximum value: 65535
 #bind_port = <None>
+bind_port = 9191
 
 #
 # Set the number of incoming connection requests.
@@ -720,9 +781,9 @@
 #  (string value)
 #key_file = /etc/ssl/key/key-file.pem
 
-# DEPRECATED: The HTTP header used to determine the scheme for the original
-# request, even if it was removed by an SSL terminating proxy. Typical value is
-# "HTTP_X_FORWARDED_PROTO". (string value)
+# DEPRECATED: The HTTP header used to determine the scheme for the
+# original request, even if it was removed by an SSL terminating
+# proxy. Typical value is "HTTP_X_FORWARDED_PROTO". (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Use the http_proxy_to_wsgi middleware instead.
@@ -735,7 +796,8 @@
 # process workers to service requests. By default, the number of CPUs
 # available is set as the value for ``workers`` limited to 8. For
 # example if the processor count is 6, 6 workers will be used, if the
-# processor count is 24 only 8 workers will be used. The limit will only
+# processor count is 24 only 8 workers will be used. The limit will
+# only
 # apply to the default value, if 24 workers is configured, 24 is used.
 #
 # Each worker process is made to listen on the port set in the
@@ -754,6 +816,7 @@
 #  (integer value)
 # Minimum value: 0
 #workers = <None>
+workers = 1
 
 #
 # Maximum line size of message headers.
@@ -823,312 +886,301 @@
 #  (integer value)
 # Minimum value: 0
 #client_socket_timeout = 900
-
 #
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+log_file = /var/log/glance/registry.log
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
 #watch_log_file = false
 
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
 # value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message is
-# DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
+[paste_deploy]
+
+#
+# From glance.registry
+#
+
+#
+# Deployment flavor to use in the server application pipeline.
+#
+# Provide a string value representing the appropriate deployment
+# flavor used in the server application pipleline. This is typically
+# the partial name of a pipeline in the paste configuration file with
+# the service name removed.
+#
+# For example, if your paste section name in the paste configuration
+# file is [pipeline:glance-api-keystone], set ``flavor`` to
+# ``keystone``.
+#
+# Possible values:
+#     * String value representing a partial pipeline name.
+#
+# Related Options:
+#     * config_file
+#
+#  (string value)
+flavor = keystone
+
+#
+# Name of the paste configuration file.
+#
+# Provide a string value representing the name of the paste
+# configuration file to use for configuring piplelines for
+# server application deployments.
+#
+# NOTES:
+#     * Provide the name or the path relative to the glance directory
+#       for the paste configuration file and not the absolute path.
+#     * The sample paste configuration file shipped with Glance need
+#       not be edited in most cases as it comes with ready-made
+#       pipelines for all common deployment flavors.
+#
+# If no value is specified for this option, the ``paste.ini`` file
+# with the prefix of the corresponding Glance service's configuration
+# file name will be searched for in the known configuration
+# directories. (For example, if this option is missing from or has no
+# value set in ``glance-api.conf``, the service will look for a file
+# named ``glance-api-paste.ini``.) If the paste configuration file is
+# not found, the service will not start.
+#
+# Possible values:
+#     * A string value representing the name of the paste
+# configuration
+#       file.
+#
+# Related Options:
+#     * flavor
+#
+#  (string value)
+#config_file = glance-api-paste.ini
+
+
+[profiler]
+
+#
+# From glance.registry
+#
+
+#
+# Enables the profiling for all services on this node. Default value
+# is False
+# (fully disable the profiling feature).
+#
+# Possible values:
+#
+# * True: Enables the feature
+# * False: Disables the feature. The profiling cannot be started via
+# this project
+# operations. If the profiling is triggered by another project, this
+# project part
+# will be empty.
+#  (boolean value)
+# Deprecated group/name - [profiler]/profiler_enabled
+#enabled = false
+
+#
+# Enables SQL requests profiling in services. Default value is False
+# (SQL
+# requests won't be traced).
+#
+# Possible values:
+#
+# * True: Enables SQL requests profiling. Each SQL query will be part
+# of the
+# trace and can the be analyzed by how much time was spent for that.
+# * False: Disables SQL requests profiling. The spent time is only
+# shown on a
+# higher level of operations. Single SQL queries cannot be analyzed
+# this
+# way.
+#  (boolean value)
+#trace_sqlalchemy = false
+
+#
+# Secret key(s) to use for encrypting context data for performance
+# profiling.
+# This string value should have the following format:
+# <key1>[,<key2>,...<keyn>],
+# where each key is some random string. A user who triggers the
+# profiling via
+# the REST API has to set one of these keys in the headers of the REST
+# API call
+# to include profiling results of this node for this particular
+# project.
+#
+# Both "enabled" flag and "hmac_keys" config options should be set to
+# enable
+# profiling. Also, to generate correct profiling information across
+# all services
+# at least one key needs to be consistent between OpenStack projects.
+# This
+# ensures it can be used from client side to generate the trace,
+# containing
+# information from all possible resources. (string value)
+#hmac_keys = SECRET_KEY
+
+#
+# Connection string for a notifier backend. Default value is
+# messaging:// which
+# sets the notifier to oslo_messaging.
+#
+# Examples of possible values:
+#
+# * messaging://: use oslo_messaging driver for sending notifications.
+# * mongodb://127.0.0.1:27017 : use mongodb driver for sending
+# notifications.
+# * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for
+# sending
+# notifications.
+#  (string value)
+#connection_string = messaging://
+
+#
+# Document type for notification indexing in elasticsearch.
+#  (string value)
+#es_doc_type = notification
+
+#
+# This parameter is a time value parameter (for example:
+# es_scroll_time=2m),
+# indicating for how long the nodes that participate in the search
+# will maintain
+# relevant resources in order to continue and support it.
+#  (string value)
+#es_scroll_time = 2m
+
+#
+# Elasticsearch splits large requests in batches. This parameter
+# defines
+# maximum size of each batch (for example: es_scroll_size=10000).
+#  (integer value)
+#es_scroll_size = 10000
+
+#
+# Redissentinel provides a timeout option on the connections.
+# This parameter defines that timeout (for example:
+# socket_timeout=0.1).
+#  (floating point value)
+#socket_timeout = 0.1
+
+#
+# Redissentinel uses a service name to identify a master redis
+# service.
+# This parameter defines the name (for example:
+# sentinal_service_name=mymaster).
+#  (string value)
+#sentinel_service_name = mymaster
 
 [database]
-connection = sqlite:////var/lib/glance/glance.sqlite
-backend = sqlalchemy
-
 #
 # From oslo.db
 #
@@ -1140,71 +1192,75 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://glance:opnfv_secret@172.16.10.36/glance?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 280
+
+# Minimum number of SQL connections to keep open in a pool. (integer
 # value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -1214,58 +1270,106 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
 #
 # From oslo.db.concurrency
 #
 
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
 # Deprecated group/name - [DEFAULT]/dbapi_use_tpool
 #use_tpool = false
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/glance/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
 
 # Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users. Unauthenticated
-# clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://172.16.10.36:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -1278,9 +1382,10 @@
 # release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and
-# will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://172.16.10.36:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -1293,8 +1398,8 @@
 # value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with Identity API
-# Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
@@ -1318,10 +1423,11 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P release.
-# (string value)
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
@@ -1332,42 +1438,12 @@
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
 
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set to
-# -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in the
-# Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
-
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every memcached server.
-# (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
 # (Optional) Socket timeout in seconds for communicating with a memcached
@@ -1393,11 +1469,11 @@
 
 # Used to control the use and type of token binding. Can be set to: "disabled"
 # to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it if
-# not. "strict" like "permissive" but if the bind type is unknown the token will
-# be rejected. "required" any form of token binding is needed to be allowed.
-# Finally the name of a binding method that must be present in tokens. (string
-# value)
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
 #enforce_token_bind = permissive
 
 # DEPRECATED: If true, the revocation list will be checked for cached tokens.
@@ -1424,891 +1500,126 @@
 # A choice of roles that must be present in a service token. Service tokens are
 # allowed to request that an expired token can be used and so this check should
 # tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present. For
-# backwards compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens pass that
-# don't pass the service_token_roles check as valid. Setting this true will
-# become the default in a future release and should be enabled if possible.
-# (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
 # value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-robin
-# fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point
-# value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are messaging,
-# messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than one
-# RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue. If
-# you just want to make sure that all queues (except those with auto-generated
-# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
-# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically deleted.
-# The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows unlimited
-# messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the heartbeat.
-# (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[paste_deploy]
-
-#
-# From glance.registry
-#
-
-#
-# Deployment flavor to use in the server application pipeline.
-#
-# Provide a string value representing the appropriate deployment
-# flavor used in the server application pipleline. This is typically
-# the partial name of a pipeline in the paste configuration file with
-# the service name removed.
-#
-# For example, if your paste section name in the paste configuration
-# file is [pipeline:glance-api-keystone], set ``flavor`` to
-# ``keystone``.
-#
-# Possible values:
-#     * String value representing a partial pipeline name.
-#
-# Related Options:
-#     * config_file
-#
-#  (string value)
-#flavor = keystone
-
-#
-# Name of the paste configuration file.
-#
-# Provide a string value representing the name of the paste
-# configuration file to use for configuring piplelines for
-# server application deployments.
-#
-# NOTES:
-#     * Provide the name or the path relative to the glance directory
-#       for the paste configuration file and not the absolute path.
-#     * The sample paste configuration file shipped with Glance need
-#       not be edited in most cases as it comes with ready-made
-#       pipelines for all common deployment flavors.
-#
-# If no value is specified for this option, the ``paste.ini`` file
-# with the prefix of the corresponding Glance service's configuration
-# file name will be searched for in the known configuration
-# directories. (For example, if this option is missing from or has no
-# value set in ``glance-api.conf``, the service will look for a file
-# named ``glance-api-paste.ini``.) If the paste configuration file is
-# not found, the service will not start.
-#
-# Possible values:
-#     * A string value representing the name of the paste configuration
-#       file.
-#
-# Related Options:
-#     * flavor
-#
-#  (string value)
-#config_file = glance-api-paste.ini
-
-
-[profiler]
-
-#
-# From glance.registry
-#
-
-#
-# Enable the profiling for all services on this node.
-#
-# Default value is False (fully disable the profiling feature).
-#
-# Possible values:
-#
-# * True: Enables the feature
-# * False: Disables the feature. The profiling cannot be started via this
-# project
-#   operations. If the profiling is triggered by another project, this project
-#   part will be empty.
-#  (boolean value)
-# Deprecated group/name - [profiler]/profiler_enabled
-#enabled = false
-
-#
-# Enable SQL requests profiling in services.
-#
-# Default value is False (SQL requests won't be traced).
-#
-# Possible values:
-#
-# * True: Enables SQL requests profiling. Each SQL query will be part of the
-#   trace and can the be analyzed by how much time was spent for that.
-# * False: Disables SQL requests profiling. The spent time is only shown on a
-#   higher level of operations. Single SQL queries cannot be analyzed this way.
-#  (boolean value)
-#trace_sqlalchemy = false
-
-#
-# Secret key(s) to use for encrypting context data for performance profiling.
-#
-# This string value should have the following format: <key1>[,<key2>,...<keyn>],
-# where each key is some random string. A user who triggers the profiling via
-# the REST API has to set one of these keys in the headers of the REST API call
-# to include profiling results of this node for this particular project.
-#
-# Both "enabled" flag and "hmac_keys" config options should be set to enable
-# profiling. Also, to generate correct profiling information across all services
-# at least one key needs to be consistent between OpenStack projects. This
-# ensures it can be used from client side to generate the trace, containing
-# information from all possible resources.
-#  (string value)
-#hmac_keys = SECRET_KEY
-
-#
-# Connection string for a notifier backend.
-#
-# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
-#
-# Examples of possible values:
-#
-# * ``messaging://`` - use oslo_messaging driver for sending spans.
-# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
-# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
-# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
-#   spans.
-# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
-# spans.
-#  (string value)
-#connection_string = messaging://
-
-#
-# Document type for notification indexing in elasticsearch.
-#  (string value)
-#es_doc_type = notification
-
-#
-# This parameter is a time value parameter (for example: es_scroll_time=2m),
-# indicating for how long the nodes that participate in the search will maintain
-# relevant resources in order to continue and support it.
-#  (string value)
-#es_scroll_time = 2m
-
-#
-# Elasticsearch splits large requests in batches. This parameter defines
-# maximum size of each batch (for example: es_scroll_size=10000).
-#  (integer value)
-#es_scroll_size = 10000
-
-#
-# Redissentinel provides a timeout option on the connections.
-# This parameter defines that timeout (for example: socket_timeout=0.1).
-#  (floating point value)
-#socket_timeout = 0.1
-
-#
-# Redissentinel uses a service name to identify a master redis service.
-# This parameter defines the name (for example:
-# ``sentinal_service_name=mymaster``).
-#  (string value)
-#sentinel_service_name = mymaster
-
-#
-# Enable filter traces that contain error/exception to a separated place.
-#
-# Default value is set to False.
-#
-# Possible values:
-#
-# * True: Enable filter traces that contain error/exception.
-# * False: Disable the filter.
-#  (boolean value)
-#filter_error_trace = false
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = glance

2019-11-21 06:32:32,836 [salt.state       :1951][INFO    ][26952] Completed state [/etc/glance/glance-registry.conf] at time 06:32:32.836432 duration_in_ms=205.658
2019-11-21 06:32:32,837 [salt.state       :1780][INFO    ][26952] Running state [/etc/glance/glance-scrubber.conf] at time 06:32:32.837181
2019-11-21 06:32:32,837 [salt.state       :1813][INFO    ][26952] Executing state file.managed for [/etc/glance/glance-scrubber.conf]
2019-11-21 06:32:32,854 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'glance/files/rocky/glance-scrubber.conf.Debian'
2019-11-21 06:32:32,979 [salt.state       :300 ][INFO    ][26952] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -28,44 +29,11 @@
 #  (boolean value)
 #allow_additional_image_properties = true
 
-# "
-# Secure hashing algorithm used for computing the 'os_hash_value' property.
-#
-# This option configures the Glance "multihash", which consists of two
-# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
-# 'os_hash_algo' will be populated by the value of this configuration
-# option, and the 'os_hash_value' will be populated by the hexdigest computed
-# when the algorithm is applied to the uploaded or imported image data.
-#
-# The value must be a valid secure hash algorithm name recognized by the
-# python 'hashlib' library.  You can determine what these are by examining
-# the 'hashlib.algorithms_available' data member of the version of the
-# library being used in your Glance installation.  For interoperability
-# purposes, however, we recommend that you use the set of secure hash
-# names supplied by the 'hashlib.algorithms_guaranteed' data member because
-# those algorithms are guaranteed to be supported by the 'hashlib' library
-# on all platforms.  Thus, any image consumer using 'hashlib' locally should
-# be able to verify the 'os_hash_value' of the image.
-#
-# The default value of 'sha512' is a performant secure hash algorithm.
-#
-# If this option is misconfigured, any attempts to store image data will fail.
-# For that reason, we recommend using the default value.
-#
-# Possible values:
-#     * Any secure hash algorithm name recognized by the Python 'hashlib'
-#       library
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#hashing_algorithm = sha512
-
 #
 # Maximum number of image members per image.
 #
-# This limits the maximum of users an image can be shared with. Any negative
+# This limits the maximum of users an image can be shared with. Any
+# negative
 # value is interpreted as unlimited.
 #
 # Related options:
@@ -77,10 +45,12 @@
 #
 # Maximum number of properties allowed on an image.
 #
-# This enforces an upper limit on the number of additional properties an image
+# This enforces an upper limit on the number of additional properties
+# an image
 # can have. Any negative value is interpreted as unlimited.
 #
-# NOTE: This won't have any impact if additional properties are disabled. Please
+# NOTE: This won't have any impact if additional properties are
+# disabled. Please
 # refer to ``allow_additional_image_properties``.
 #
 # Related options:
@@ -137,7 +107,8 @@
 #
 # Finally, when this configuration option is set to
 # ``glance.db.simple.api``, image catalog data is stored in and read
-# from an in-memory data structure. This is primarily used for testing.
+# from an in-memory data structure. This is primarily used for
+# testing.
 #
 # Related options:
 #     * enable_v2_api
@@ -150,8 +121,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -268,9 +239,10 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
-# Please see the Newton release notes for more information.
+# Reason: This option will be removed in the Pike release or later
+# because the same functionality can be achieved with greater
+# granularity by using policies. Please see the Newton release notes
+# for more information.
 #show_multiple_locations = false
 
 #
@@ -302,18 +274,25 @@
 #
 # Maximum amount of image storage per tenant.
 #
-# This enforces an upper limit on the cumulative storage consumed by all images
+# This enforces an upper limit on the cumulative storage consumed by
+# all images
 # of a tenant across all stores. This is a per-tenant limit.
 #
-# The default unit for this configuration option is Bytes. However, storage
-# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
-# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
-# TeraBytes respectively. Note that there should not be any space between the
-# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# The default unit for this configuration option is Bytes. However,
+# storage
+# units can be specified using case-sensitive literals ``B``, ``KB``,
+# ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes,
+# GigaBytes and
+# TeraBytes respectively. Note that there should not be any space
+# between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative
+# values
 # are invalid and result in errors.
 #
 # Possible values:
-#     * A string that is a valid concatenation of a non-negative integer
+#     * A string that is a valid concatenation of a non-negative
+# integer
 #       representing the storage value and an optional string literal
 #       representing storage units as mentioned above.
 #
@@ -322,6 +301,40 @@
 #
 #  (string value)
 #user_storage_quota = 0
+
+#
+# Deploy the v1 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond to
+# requests on registered endpoints conforming to the v1 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is enabled, then ``enable_v1_registry`` must
+#       also be set to ``True`` to enable mandatory usage of Registry
+#       service with v1 API.
+#
+#     * If this option is disabled, then the ``enable_v1_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+#     * This option is separate from ``enable_v2_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v2 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_registry
+#     * enable_v2_api
+#
+#  (boolean value)
+#enable_v1_api = true
 
 #
 # Deploy the v2 OpenStack Images API.
@@ -335,18 +348,44 @@
 #       option, which is enabled by default, is also recommended
 #       to be disabled.
 #
+#     * This option is separate from ``enable_v1_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v1 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
 # Possible values:
 #     * True
 #     * False
 #
 # Related options:
 #     * enable_v2_registry
+#     * enable_v1_api
 #
 #  (boolean value)
 #enable_v2_api = true
 
 #
-#                     DEPRECATED FOR REMOVAL
+# Deploy the v1 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v1 API requests.
+#
+# NOTES:
+#     * Use of Registry is mandatory in v1 API, so this option must
+#       be set to ``True`` if the ``enable_v1_api`` option is enabled.
+#
+#     * If deploying only the v2 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_api
+#
 #  (boolean value)
 #enable_v1_registry = true
 
@@ -380,8 +419,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -399,7 +438,7 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -486,31 +525,63 @@
 #
 # Related options:
 #     * [task]/work_dir
+#     * [DEFAULT]/enable_image_import (*deprecated*)
 #
 #  (string value)
 #node_staging_uri = file:///tmp/staging/
 
+# DEPRECATED:
+# Enables the Image Import workflow introduced in Pike
+#
+# As '[DEFAULT]/node_staging_uri' is required for the Image
+# Import, it's disabled per default in Pike, enabled per
+# default in Queens and removed in Rocky. This allows Glance to
+# operate with previous version configs upon upgrade.
+#
+# Setting this option to False will disable the endpoints related
+# to Image Import Refactoring work.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (boolean value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated for removal in Rocky.
+#
+# It was introduced to make sure that the API is not enabled
+# before the '[DEFAULT]/node_staging_uri' is defined and is
+# long term redundant.
+#enable_image_import = true
+
 #
 # List of enabled Image Import Methods
 #
 # Both 'glance-direct' and 'web-download' are enabled by default.
 #
 # Related options:
-#     * [DEFAULT]/node_staging_uri (list value)
-#enabled_import_methods = [glance-direct,web-download]
+#     * [DEFAULT]/node_staging_uri
+#     * [DEFAULT]/enable_image_import (list value)
+#enabled_import_methods = glance-direct,web-download
 
 #
 # The amount of time, in seconds, to delay image scrubbing.
 #
-# When delayed delete is turned on, an image is put into ``pending_delete``
-# state upon deletion until the scrubber deletes its image data. Typically, soon
-# after the image is put into ``pending_delete`` state, it is available for
-# scrubbing. However, scrubbing can be delayed until a later point using this
-# configuration option. This option denotes the time period an image spends in
+# When delayed delete is turned on, an image is put into
+# ``pending_delete``
+# state upon deletion until the scrubber deletes its image data.
+# Typically, soon
+# after the image is put into ``pending_delete`` state, it is
+# available for
+# scrubbing. However, scrubbing can be delayed until a later point
+# using this
+# configuration option. This option denotes the time period an image
+# spends in
 # ``pending_delete`` state before it is available for scrubbing.
 #
-# It is important to realize that this has storage implications. The larger the
-# ``scrub_time``, the longer the time to reclaim backend storage from deleted
+# It is important to realize that this has storage implications. The
+# larger the
+# ``scrub_time``, the longer the time to reclaim backend storage from
+# deleted
 # images.
 #
 # Possible values:
@@ -526,11 +597,16 @@
 #
 # The size of thread pool to be used for scrubbing images.
 #
-# When there are a large number of images to scrub, it is beneficial to scrub
-# images in parallel so that the scrub queue stays in control and the backend
-# storage is reclaimed in a timely fashion. This configuration option denotes
-# the maximum number of images to be scrubbed in parallel. The default value is
-# one, which signifies serial scrubbing. Any value above one indicates parallel
+# When there are a large number of images to scrub, it is beneficial
+# to scrub
+# images in parallel so that the scrub queue stays in control and the
+# backend
+# storage is reclaimed in a timely fashion. This configuration option
+# denotes
+# the maximum number of images to be scrubbed in parallel. The default
+# value is
+# one, which signifies serial scrubbing. Any value above one indicates
+# parallel
 # scrubbing.
 #
 # Possible values:
@@ -546,19 +622,28 @@
 #
 # Turn on/off delayed delete.
 #
-# Typically when an image is deleted, the ``glance-api`` service puts the image
-# into ``deleted`` state and deletes its data at the same time. Delayed delete
-# is a feature in Glance that delays the actual deletion of image data until a
+# Typically when an image is deleted, the ``glance-api`` service puts
+# the image
+# into ``deleted`` state and deletes its data at the same time.
+# Delayed delete
+# is a feature in Glance that delays the actual deletion of image data
+# until a
 # later point in time (as determined by the configuration option
 # ``scrub_time``).
-# When delayed delete is turned on, the ``glance-api`` service puts the image
-# into ``pending_delete`` state upon deletion and leaves the image data in the
-# storage backend for the image scrubber to delete at a later time. The image
-# scrubber will move the image into ``deleted`` state upon successful deletion
+# When delayed delete is turned on, the ``glance-api`` service puts
+# the image
+# into ``pending_delete`` state upon deletion and leaves the image
+# data in the
+# storage backend for the image scrubber to delete at a later time.
+# The image
+# scrubber will move the image into ``deleted`` state upon successful
+# deletion
 # of image data.
 #
-# NOTE: When delayed delete is turned on, image scrubber MUST be running as a
-# periodic task to prevent the backend storage from filling up with undesired
+# NOTE: When delayed delete is turned on, image scrubber MUST be
+# running as a
+# periodic task to prevent the backend storage from filling up with
+# undesired
 # usage.
 #
 # Possible values:
@@ -576,13 +661,19 @@
 #
 # Time interval, in seconds, between scrubber runs in daemon mode.
 #
-# Scrubber can be run either as a cron job or daemon. When run as a daemon, this
-# configuration time specifies the time period between two runs. When the
-# scrubber wakes up, it fetches and scrubs all ``pending_delete`` images that
-# are available for scrubbing after taking ``scrub_time`` into consideration.
-#
-# If the wakeup time is set to a large number, there may be a large number of
-# images to be scrubbed for each run. Also, this impacts how quickly the backend
+# Scrubber can be run either as a cron job or daemon. When run as a
+# daemon, this
+# configuration time specifies the time period between two runs. When
+# the
+# scrubber wakes up, it fetches and scrubs all ``pending_delete``
+# images that
+# are available for scrubbing after taking ``scrub_time`` into
+# consideration.
+#
+# If the wakeup time is set to a large number, there may be a large
+# number of
+# images to be scrubbed for each run. Also, this impacts how quickly
+# the backend
 # storage is reclaimed.
 #
 # Possible values:
@@ -594,7 +685,7 @@
 #
 #  (integer value)
 # Minimum value: 0
-#wakeup_time = 300
+wakeup_time = 300
 
 #
 # Run scrubber as a daemon.
@@ -618,266 +709,131 @@
 #
 #  (boolean value)
 #daemon = false
-
-#
-# Restore the image status from 'pending_delete' to 'active'.
-#
-# This option is used by administrator to reset the image's status from
-# 'pending_delete' to 'active' when the image is deleted by mistake and
-# 'pending delete' feature is enabled in Glance. Please make sure the
-# glance-scrubber daemon is stopped before restoring the image to avoid image
-# data inconsistency.
-#
-# Possible values:
-#     * image's uuid
-#
-#  (string value)
-#restore = <None>
-
+daemon = false
 #
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+log_file = /var/log/glance/scrubber.log
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
 #watch_log_file = false
 
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
 # value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message is
-# DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
-
-[database]
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
-# Deprecated group/name - [DATABASE]/idle_timeout
-# Deprecated group/name - [database]/idle_timeout
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-#
-# From oslo.db.concurrency
-#
-
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
-
-
 [glance_store]
 
 #
 # From glance.store
 #
 
-# DEPRECATED:
+#
 # List of enabled Glance stores.
 #
 # Register the storage backends to use for storing disk images
@@ -898,18 +854,9 @@
 #     * default_store
 #
 #  (list value)
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``enabled_backends`` which helps to configure multiple backend stores
-# of different schemes.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #stores = file,http
 
-# DEPRECATED:
+#
 # The default scheme to use for storing images.
 #
 # Provide a string value representing the default scheme to use for
@@ -951,18 +898,9 @@
 # sheepdog - <No description provided>
 # cinder - <No description provided>
 # vsphere - <No description provided>
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``default_backend`` which acts similar to ``default_store`` config
-# option.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #default_store = file
 
-# DEPRECATED:
+#
 # Minimum interval in seconds to execute updating dynamic storage
 # capabilities based on current backend status.
 #
@@ -977,19 +915,14 @@
 # By default, this option is set to zero and is disabled. Provide an
 # integer value greater than zero to enable this option.
 #
-# NOTE 1: For more information on store capabilities and their updates,
-# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
-# /store-capabilities.html
+# NOTE: For more information on store capabilities and their updates,
+# please visit: https://specs.openstack.org/openstack/glance-
+# specs/specs/kilo/store-capabilities.html
 #
 # For more information on setting up a particular store in your
 # deployment and help with the usage of this feature, please contact
 # the storage driver maintainers listed here:
-# https://docs.openstack.org/glance_store/latest/user/drivers.html
-#
-# NOTE 2: The dynamic store update capability described above is not
-# implemented by any current store drivers.  Thus, this option DOES
-# NOT DO ANYTHING (and it never has).  It is DEPRECATED and scheduled
-# for removal early in the Stein development cycle.
+# http://docs.openstack.org/developer/glance_store/drivers/index.html
 #
 # Possible values:
 #     * Zero
@@ -1000,15 +933,6 @@
 #
 #  (integer value)
 # Minimum value: 0
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option configures a stub method that has not been implemented
-# for any existing store drivers.  Hence it is non-operational, and
-# giving it a value does absolutely nothing.
-#
-# This option is scheduled for removal early in the Stein development
-# cycle.
 #store_capabilities_update_min_interval = 0
 
 #
@@ -1017,16 +941,20 @@
 # When the ``cinder_endpoint_template`` is not set and any of
 # ``cinder_store_auth_address``, ``cinder_store_user_name``,
 # ``cinder_store_project_name``, ``cinder_store_password`` is not set,
-# cinder store uses this information to lookup cinder endpoint from the service
-# catalog in the current context. ``cinder_os_region_name``, if set, is taken
+# cinder store uses this information to lookup cinder endpoint from
+# the service
+# catalog in the current context. ``cinder_os_region_name``, if set,
+# is taken
 # into consideration to fetch the appropriate endpoint.
 #
-# The service catalog can be listed by the ``openstack catalog list`` command.
+# The service catalog can be listed by the ``openstack catalog list``
+# command.
 #
 # Possible values:
 #     * A string of of the following form:
 #       ``<service_type>:<service_name>:<interface>``
-#       At least ``service_type`` and ``interface`` should be specified.
+#       At least ``service_type`` and ``interface`` should be
+# specified.
 #       ``service_name`` can be omitted.
 #
 # Related options:
@@ -1043,18 +971,22 @@
 #
 # Override service catalog lookup with template for cinder endpoint.
 #
-# When this option is set, this value is used to generate cinder endpoint,
+# When this option is set, this value is used to generate cinder
+# endpoint,
 # instead of looking up from the service catalog.
 # This value is ignored if ``cinder_store_auth_address``,
 # ``cinder_store_user_name``, ``cinder_store_project_name``, and
 # ``cinder_store_password`` are specified.
 #
-# If this configuration option is set, ``cinder_catalog_info`` will be ignored.
-#
-# Possible values:
-#     * URL template string for cinder endpoint, where ``%%(tenant)s`` is
+# If this configuration option is set, ``cinder_catalog_info`` will be
+# ignored.
+#
+# Possible values:
+#     * URL template string for cinder endpoint, where ``%%(tenant)s``
+# is
 #       replaced with the current tenant (project) name.
-#       For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s``
+#       For example:
+# ``http://cinder.openstack.example.org/v2/%%(tenant)s``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -1069,10 +1001,14 @@
 #
 # Region name to lookup cinder service from the service catalog.
 #
-# This is used only when ``cinder_catalog_info`` is used for determining the
-# endpoint. If set, the lookup for cinder endpoint by this node is filtered to
-# the specified region. It is useful when multiple regions are listed in the
-# catalog. If this is not set, the endpoint is looked up from every region.
+# This is used only when ``cinder_catalog_info`` is used for
+# determining the
+# endpoint. If set, the lookup for cinder endpoint by this node is
+# filtered to
+# the specified region. It is useful when multiple regions are listed
+# in the
+# catalog. If this is not set, the endpoint is looked up from every
+# region.
 #
 # Possible values:
 #     * A string that is a valid region name.
@@ -1088,9 +1024,10 @@
 # Location of a CA certificates file used for cinder client requests.
 #
 # The specified CA certificates file, if set, is used to verify cinder
-# connections via HTTPS endpoint. If the endpoint is HTTP, this value is
-# ignored.
-# ``cinder_api_insecure`` must be set to ``True`` to enable the verification.
+# connections via HTTPS endpoint. If the endpoint is HTTP, this value
+# is ignored.
+# ``cinder_api_insecure`` must be set to ``True`` to enable the
+# verification.
 #
 # Possible values:
 #     * Path to a ca certificates file
@@ -1104,7 +1041,8 @@
 #
 # Number of cinderclient retries on failed http calls.
 #
-# When a call failed by any errors, cinderclient will retry the call up to the
+# When a call failed by any errors, cinderclient will retry the call
+# up to the
 # specified times after sleeping a few seconds.
 #
 # Possible values:
@@ -1121,11 +1059,16 @@
 # Time period, in seconds, to wait for a cinder volume transition to
 # complete.
 #
-# When the cinder volume is created, deleted, or attached to the glance node to
-# read/write the volume data, the volume's state is changed. For example, the
-# newly created volume status changes from ``creating`` to ``available`` after
-# the creation process is completed. This specifies the maximum time to wait for
-# the status change. If a timeout occurs while waiting, or the status is changed
+# When the cinder volume is created, deleted, or attached to the
+# glance node to
+# read/write the volume data, the volume's state is changed. For
+# example, the
+# newly created volume status changes from ``creating`` to
+# ``available`` after
+# the creation process is completed. This specifies the maximum time
+# to wait for
+# the status change. If a timeout occurs while waiting, or the status
+# is changed
 # to an unexpected value (e.g. `error``), the image creation fails.
 #
 # Possible values:
@@ -1141,8 +1084,10 @@
 #
 # Allow to perform insecure SSL requests to cinder.
 #
-# If this option is set to True, HTTPS endpoint connection is verified using the
-# CA certificates file specified by ``cinder_ca_certificates_file`` option.
+# If this option is set to True, HTTPS endpoint connection is verified
+# using the
+# CA certificates file specified by ``cinder_ca_certificates_file``
+# option.
 #
 # Possible values:
 #     * True
@@ -1157,15 +1102,23 @@
 #
 # The address where the cinder authentication service is listening.
 #
-# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``,
-# ``cinder_store_project_name``, and ``cinder_store_password`` options are
-# specified, the specified values are always used for the authentication.
-# This is useful to hide the image volumes from users by storing them in a
-# project/tenant specific to the image service. It also enables users to share
-# the image volume among other projects under the control of glance's ACL.
-#
-# If either of these options are not set, the cinder endpoint is looked up
-# from the service catalog, and current context's user and project are used.
+# When all of ``cinder_store_auth_address``,
+# ``cinder_store_user_name``,
+# ``cinder_store_project_name``, and ``cinder_store_password`` options
+# are
+# specified, the specified values are always used for the
+# authentication.
+# This is useful to hide the image volumes from users by storing them
+# in a
+# project/tenant specific to the image service. It also enables users
+# to share
+# the image volume among other projects under the control of glance's
+# ACL.
+#
+# If either of these options are not set, the cinder endpoint is
+# looked up
+# from the service catalog, and current context's user and project are
+# used.
 #
 # Possible values:
 #     * A valid authentication service address, for example:
@@ -1182,7 +1135,8 @@
 #
 # User name to authenticate against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
@@ -1199,11 +1153,13 @@
 #
 # Password for the user authenticating against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
-#     * A valid password for the user specified by ``cinder_store_user_name``
+#     * A valid password for the user specified by
+# ``cinder_store_user_name``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -1216,10 +1172,12 @@
 #
 # Project name where the image volume is stored in cinder.
 #
-# If this configuration option is not set, the project in current context is
+# If this configuration option is not set, the project in current
+# context is
 # used.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the project of the current context is used.
 #
 # Possible values:
@@ -1234,11 +1192,15 @@
 #cinder_store_project_name = <None>
 
 #
-# Path to the rootwrap configuration file to use for running commands as root.
-#
-# The cinder store requires root privileges to operate the image volumes (for
-# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.).
-# The configuration file should allow the required commands by cinder store and
+# Path to the rootwrap configuration file to use for running commands
+# as root.
+#
+# The cinder store requires root privileges to operate the image
+# volumes (for
+# connecting to iSCSI/FC volumes and reading/writing the volume data,
+# etc.).
+# The configuration file should allow the required commands by cinder
+# store and
 # os-brick library.
 #
 # Possible values:
@@ -1253,11 +1215,14 @@
 #
 # Volume type that will be used for volume creation in cinder.
 #
-# Some cinder backends can have several volume types to optimize storage usage.
-# Adding this option allows an operator to choose a specific volume type
+# Some cinder backends can have several volume types to optimize
+# storage usage.
+# Adding this option allows an operator to choose a specific volume
+# type
 # in cinder that can be optimized for images.
 #
-# If this is not set, then the default volume type specified in the cinder
+# If this is not set, then the default volume type specified in the
+# cinder
 # configuration will be used for volume creation.
 #
 # Possible values:
@@ -1312,7 +1277,7 @@
 #
 # More information on configuring filesystem store with multiple store
 # directories can be found at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # NOTE: This directory is used only when filesystem store is used as a
 # storage backend. Either ``filesystem_store_datadir`` or
@@ -1353,8 +1318,10 @@
 #
 # File access permissions for the image files.
 #
-# Set the intended file access permissions for image data. This provides
-# a way to enable other services, e.g. Nova, to consume images directly
+# Set the intended file access permissions for image data. This
+# provides
+# a way to enable other services, e.g. Nova, to consume images
+# directly
 # from the filesystem store. The users running the services that are
 # intended to be given access to could be made a member of the group
 # that owns the files created. Assigning a value less then or equal to
@@ -1363,7 +1330,7 @@
 # digit.
 #
 # For more information, please refer the documentation at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # Possible values:
 #     * A valid file access permission
@@ -1380,8 +1347,10 @@
 # Path to the CA bundle file.
 #
 # This configuration option enables the operator to use a custom
-# Certificate Authority file to verify the remote server certificate. If
-# this option is set, the ``https_insecure`` option will be ignored and
+# Certificate Authority file to verify the remote server certificate.
+# If
+# this option is set, the ``https_insecure`` option will be ignored
+# and
 # the CA file specified will be used to authenticate the server
 # certificate and establish a secure connection to the server.
 #
@@ -1399,8 +1368,10 @@
 #
 # This configuration option takes in a boolean value to determine
 # whether or not to verify the remote server certificate. If set to
-# True, the remote server certificate is not verified. If the option is
-# set to False, then the default CA truststore is used for verification.
+# True, the remote server certificate is not verified. If the option
+# is
+# set to False, then the default CA truststore is used for
+# verification.
 #
 # This option is ignored if ``https_ca_certificates_file`` is set.
 # The remote server certificate will then be verified using the file
@@ -1423,12 +1394,14 @@
 # This configuration option specifies the http/https proxy information
 # that should be used to connect to the remote server. The proxy
 # information should be a key value pair of the scheme and proxy, for
-# example, http:10.0.0.1:3128. You can also specify proxies for multiple
+# example, http:10.0.0.1:3128. You can also specify proxies for
+# multiple
 # schemes by separating the key value pairs with a comma, for example,
 # http:10.0.0.1:3128, https:10.0.0.1:1080.
 #
 # Possible values:
-#     * A comma separated list of scheme:proxy pairs as described above
+#     * A comma separated list of scheme:proxy pairs as described
+# above
 #
 # Related options:
 #     * None
@@ -1440,11 +1413,13 @@
 # Size, in megabytes, to chunk RADOS images into.
 #
 # Provide an integer value representing the size in megabytes to chunk
-# Glance images into. The default chunk size is 8 megabytes. For optimal
+# Glance images into. The default chunk size is 8 megabytes. For
+# optimal
 # performance, the value should be a power of two.
 #
 # When Ceph's RBD object storage system is used as the storage backend
-# for storing Glance images, the images are chunked into objects of the
+# for storing Glance images, the images are chunked into objects of
+# the
 # size set using this option. These chunked objects are then stored
 # across the distributed block data store to use for Glance.
 #
@@ -1461,8 +1436,10 @@
 #
 # RADOS pool in which images are stored.
 #
-# When RBD is used as the storage backend for storing Glance images, the
-# images are stored by means of logical grouping of the objects (chunks
+# When RBD is used as the storage backend for storing Glance images,
+# the
+# images are stored by means of logical grouping of the objects
+# (chunks
 # of images) into a ``pool``. Each pool is defined with the number of
 # placement groups it can contain. The default pool that is used is
 # 'images'.
@@ -1482,7 +1459,8 @@
 #
 # RADOS user to authenticate as.
 #
-# This configuration option takes in the RADOS user to authenticate as.
+# This configuration option takes in the RADOS user to authenticate
+# as.
 # This is only needed when RADOS authentication is enabled and is
 # applicable only if the user is using Cephx authentication. If the
 # value for this option is not set by the user or is set to None, a
@@ -1501,9 +1479,11 @@
 #
 # Ceph configuration file path.
 #
-# This configuration option takes in the path to the Ceph configuration
+# This configuration option takes in the path to the Ceph
+# configuration
 # file to be used. If the value for this option is not set by the user
-# or is set to None, librados will locate the default configuration file
+# or is set to None, librados will locate the default configuration
+# file
 # which is located at /etc/ceph/ceph.conf. If using Cephx
 # authentication, this file should include a reference to the right
 # keyring in a client.<USER> section
@@ -1521,7 +1501,8 @@
 # Timeout value for connecting to Ceph cluster.
 #
 # This configuration option takes in the timeout value in seconds used
-# when connecting to the Ceph cluster i.e. it sets the time to wait for
+# when connecting to the Ceph cluster i.e. it sets the time to wait
+# for
 # glance-api before closing the connection. This prevents glance-api
 # hangups during the connection to RBD. If the value for this option
 # is set to less than or equal to 0, no timeout is set and the default
@@ -1605,7 +1586,7 @@
 # Related Options:
 #     * sheepdog_store_port
 #
-#  (host address value)
+#  (unknown value)
 #sheepdog_store_address = 127.0.0.1
 
 #
@@ -1613,7 +1594,8 @@
 #
 # This boolean determines whether or not to verify the server
 # certificate. If this option is set to True, swiftclient won't check
-# for a valid SSL certificate when authenticating. If the option is set
+# for a valid SSL certificate when authenticating. If the option is
+# set
 # to False, then the default CA truststore is used for verification.
 #
 # Possible values:
@@ -1629,7 +1611,8 @@
 #
 # Path to the CA bundle file.
 #
-# This configuration option enables the operator to specify the path to
+# This configuration option enables the operator to specify the path
+# to
 # a custom Certificate Authority file for SSL verification when
 # connecting to Swift.
 #
@@ -1685,7 +1668,8 @@
 # the container and object to the configured URL.
 #
 # Possible values:
-#     * String value representing a valid URL path up to a Swift container
+#     * String value representing a valid URL path up to a Swift
+# container
 #
 # Related Options:
 #     * None
@@ -1697,9 +1681,12 @@
 # Endpoint Type of Swift service.
 #
 # This string value indicates the endpoint type to use to fetch the
-# Swift endpoint. The endpoint type determines the actions the user will
-# be allowed to perform, for instance, reading and writing to the Store.
-# This setting is only used if swift_store_auth_version is greater than
+# Swift endpoint. The endpoint type determines the actions the user
+# will
+# be allowed to perform, for instance, reading and writing to the
+# Store.
+# This setting is only used if swift_store_auth_version is greater
+# than
 # 1.
 #
 # Possible values:
@@ -1739,32 +1726,46 @@
 #swift_store_service_type = object-store
 
 #
-# Name of single container to store images/name prefix for multiple containers
-#
-# When a single container is being used to store images, this configuration
-# option indicates the container within the Glance account to be used for
-# storing all images. When multiple containers are used to store images, this
+# Name of single container to store images/name prefix for multiple
+# containers
+#
+# When a single container is being used to store images, this
+# configuration
+# option indicates the container within the Glance account to be used
+# for
+# storing all images. When multiple containers are used to store
+# images, this
 # will be the name prefix for all containers. Usage of single/multiple
 # containers can be controlled using the configuration option
 # ``swift_store_multiple_containers_seed``.
 #
-# When using multiple containers, the containers will be named after the value
-# set for this configuration option with the first N chars of the image UUID
+# When using multiple containers, the containers will be named after
+# the value
+# set for this configuration option with the first N chars of the
+# image UUID
 # as the suffix delimited by an underscore (where N is specified by
 # ``swift_store_multiple_containers_seed``).
 #
-# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
-# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
-# the container ``glance_fda``. All dashes in the UUID are included when
-# creating the container name but do not count toward the character limit, so
+# Example: if the seed is set to 3 and swift_store_container =
+# ``glance``, then
+# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be
+# placed in
+# the container ``glance_fda``. All dashes in the UUID are included
+# when
+# creating the container name but do not count toward the character
+# limit, so
 # when N=10 the container name would be ``glance_fdae39a1-ba.``
 #
 # Possible values:
-#     * If using single container, this configuration option can be any string
+#     * If using single container, this configuration option can be
+# any string
 #       that is a valid swift container name in Glance's Swift account
-#     * If using multiple containers, this configuration option can be any
-#       string as long as it satisfies the container naming rules enforced by
-#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
+#     * If using multiple containers, this configuration option can be
+# any
+#       string as long as it satisfies the container naming rules
+# enforced by
+#       Swift. The value of ``swift_store_multiple_containers_seed``
+# should be
 #       taken into account as well.
 #
 # Related options:
@@ -1776,24 +1777,31 @@
 #swift_store_container = glance
 
 #
-# The size threshold, in MB, after which Glance will start segmenting image
-# data.
-#
-# Swift has an upper limit on the size of a single uploaded object. By default,
-# this is 5GB. To upload objects bigger than this limit, objects are segmented
-# into multiple smaller objects that are tied together with a manifest file.
+# The size threshold, in MB, after which Glance will start segmenting
+# image data.
+#
+# Swift has an upper limit on the size of a single uploaded object. By
+# default,
+# this is 5GB. To upload objects bigger than this limit, objects are
+# segmented
+# into multiple smaller objects that are tied together with a manifest
+# file.
 # For more detail, refer to
-# https://docs.openstack.org/swift/latest/overview_large_objects.html
-#
-# This configuration option specifies the size threshold over which the Swift
+# http://docs.openstack.org/developer/swift/overview_large_objects.html
+#
+# This configuration option specifies the size threshold over which
+# the Swift
 # driver will start segmenting image data into multiple smaller files.
-# Currently, the Swift driver only supports creating Dynamic Large Objects.
-#
-# NOTE: This should be set by taking into account the large object limit
+# Currently, the Swift driver only supports creating Dynamic Large
+# Objects.
+#
+# NOTE: This should be set by taking into account the large object
+# limit
 # enforced by the Swift cluster in consideration.
 #
 # Possible values:
-#     * A positive integer that is less than or equal to the large object limit
+#     * A positive integer that is less than or equal to the large
+# object limit
 #       enforced by the Swift cluster in consideration.
 #
 # Related options:
@@ -1804,20 +1812,26 @@
 #swift_store_large_object_size = 5120
 
 #
-# The maximum size, in MB, of the segments when image data is segmented.
-#
-# When image data is segmented to upload images that are larger than the limit
-# enforced by the Swift cluster, image data is broken into segments that are no
+# The maximum size, in MB, of the segments when image data is
+# segmented.
+#
+# When image data is segmented to upload images that are larger than
+# the limit
+# enforced by the Swift cluster, image data is broken into segments
+# that are no
 # bigger than the size specified by this configuration option.
 # Refer to ``swift_store_large_object_size`` for more detail.
 #
 # For example: if ``swift_store_large_object_size`` is 5GB and
-# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
-# segmented into 7 segments where the first six segments will be 1GB in size and
+# ``swift_store_large_object_chunk_size`` is 1GB, an image of size
+# 6.2GB will be
+# segmented into 7 segments where the first six segments will be 1GB
+# in size and
 # the seventh segment will be 0.2GB.
 #
 # Possible values:
-#     * A positive integer that is less than or equal to the large object limit
+#     * A positive integer that is less than or equal to the large
+# object limit
 #       enforced by Swift cluster in consideration.
 #
 # Related options:
@@ -1830,9 +1844,12 @@
 #
 # Create container, if it doesn't already exist, when uploading image.
 #
-# At the time of uploading an image, if the corresponding container doesn't
-# exist, it will be created provided this configuration option is set to True.
-# By default, it won't be created. This behavior is applicable for both single
+# At the time of uploading an image, if the corresponding container
+# doesn't
+# exist, it will be created provided this configuration option is set
+# to True.
+# By default, it won't be created. This behavior is applicable for
+# both single
 # and multiple containers mode.
 #
 # Possible values:
@@ -1848,9 +1865,12 @@
 #
 # Store images in tenant's Swift account.
 #
-# This enables multi-tenant storage mode which causes Glance images to be stored
-# in tenant specific Swift accounts. If this is disabled, Glance stores all
-# images in its own account. More details multi-tenant store can be found at
+# This enables multi-tenant storage mode which causes Glance images to
+# be stored
+# in tenant specific Swift accounts. If this is disabled, Glance
+# stores all
+# images in its own account. More details multi-tenant store can be
+# found at
 # https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
 #
 # NOTE: If using multi-tenant swift store, please make sure
@@ -1870,18 +1890,26 @@
 #
 # Seed indicating the number of containers to use for storing images.
 #
-# When using a single-tenant store, images can be stored in one or more than one
-# containers. When set to 0, all images will be stored in one single container.
-# When set to an integer value between 1 and 32, multiple containers will be
-# used to store images. This configuration option will determine how many
-# containers are created. The total number of containers that will be used is
-# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
+# When using a single-tenant store, images can be stored in one or
+# more than one
+# containers. When set to 0, all images will be stored in one single
+# container.
+# When set to an integer value between 1 and 32, multiple containers
+# will be
+# used to store images. This configuration option will determine how
+# many
+# containers are created. The total number of containers that will be
+# used is
+# equal to 16^N, so if this config option is set to 2, then 16^2=256
+# containers
 # will be used to store images.
 #
-# Please refer to ``swift_store_container`` for more detail on the naming
-# convention. More detail about using multiple containers can be found at
-# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
-# multiple-containers.html
+# Please refer to ``swift_store_container`` for more detail on the
+# naming
+# convention. More detail about using multiple containers can be found
+# at
+# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-
+# store-multiple-containers.html
 #
 # NOTE: This is used only when swift_store_multi_tenant is disabled.
 #
@@ -1906,7 +1934,8 @@
 # default value is an empty list.
 #
 # Possible values:
-#     * A comma separated list of strings representing UUIDs of Keystone
+#     * A comma separated list of strings representing UUIDs of
+# Keystone
 #       projects/tenants
 #
 # Related options:
@@ -2058,30 +2087,34 @@
 #  (string value)
 #default_swift_reference = ref1
 
-# DEPRECATED: Version of the authentication service to use. Valid versions are 2
-# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
+# DEPRECATED: Version of the authentication service to use. Valid
+# versions are 2 and 3 for keystone and 1 (deprecated) for swauth and
+# rackspace. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'auth_version' in the Swift back-end configuration file is
+# The option 'auth_version' in the Swift back-end configuration file
+# is
 # used instead.
 #swift_store_auth_version = 2
 
-# DEPRECATED: The address where the Swift authentication service is listening.
-# (string value)
+# DEPRECATED: The address where the Swift authentication service is
+# listening. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'auth_address' in the Swift back-end configuration file is
+# The option 'auth_address' in the Swift back-end configuration file
+# is
 # used instead.
 #swift_store_auth_address = <None>
 
-# DEPRECATED: The user to authenticate against the Swift authentication service.
-# (string value)
+# DEPRECATED: The user to authenticate against the Swift
+# authentication service. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'user' in the Swift back-end configuration file is set instead.
+# The option 'user' in the Swift back-end configuration file is set
+# instead.
 #swift_store_user = <None>
 
 # DEPRECATED: Auth key for the user authenticating against the Swift
@@ -2145,9 +2178,11 @@
 #
 # Address of the ESX/ESXi or vCenter Server target system.
 #
-# This configuration option sets the address of the ESX/ESXi or vCenter
+# This configuration option sets the address of the ESX/ESXi or
+# vCenter
 # Server target system. This option is required when using the VMware
-# storage backend. The address can contain an IP address (127.0.0.1) or
+# storage backend. The address can contain an IP address (127.0.0.1)
+# or
 # a DNS name (www.my-domain.com).
 #
 # Possible Values:
@@ -2158,7 +2193,7 @@
 #     * vmware_server_username
 #     * vmware_server_password
 #
-#  (host address value)
+#  (unknown value)
 #vmware_server_host = 127.0.0.1
 
 #
@@ -2219,7 +2254,8 @@
 # Interval in seconds used for polling remote tasks invoked on VMware
 # ESX/VC server.
 #
-# This configuration option takes in the sleep time in seconds for polling an
+# This configuration option takes in the sleep time in seconds for
+# polling an
 # on-going async task as part of the VMWare ESX/VC server API call.
 #
 # Possible Values:
@@ -2233,11 +2269,14 @@
 #vmware_task_poll_interval = 5
 
 #
-# The directory where the glance images will be stored in the datastore.
-#
-# This configuration option specifies the path to the directory where the
+# The directory where the glance images will be stored in the
+# datastore.
+#
+# This configuration option specifies the path to the directory where
+# the
 # glance images will be stored in the VMware datastore. If this option
-# is not set,  the default directory where the glance images are stored
+# is not set,  the default directory where the glance images are
+# stored
 # is openstack_glance.
 #
 # Possible Values:
@@ -2258,7 +2297,8 @@
 # verified. If this option is set to False, then the default CA
 # truststore is used for verification.
 #
-# This option is ignored if the "vmware_ca_file" option is set. In that
+# This option is ignored if the "vmware_ca_file" option is set. In
+# that
 # case, the ESX/vCenter server certificate will then be verified using
 # the file specified using the "vmware_ca_file" option .
 #
@@ -2280,7 +2320,8 @@
 # Cerificate Authority File to verify the ESX/vCenter certificate.
 #
 # If this option is set, the "vmware_insecure" option will be ignored
-# and the CA file specified will be used to authenticate the ESX/vCenter
+# and the CA file specified will be used to authenticate the
+# ESX/vCenter
 # server certificate and establish a secure connection to the server.
 #
 # Possible Values:
@@ -2295,18 +2336,22 @@
 #
 # The datastores where the image can be stored.
 #
-# This configuration option specifies the datastores where the image can
+# This configuration option specifies the datastores where the image
+# can
 # be stored in the VMWare store backend. This option may be specified
-# multiple times for specifying multiple datastores. The datastore name
+# multiple times for specifying multiple datastores. The datastore
+# name
 # should be specified after its datacenter path, separated by ":". An
-# optional weight may be given after the datastore name, separated again
+# optional weight may be given after the datastore name, separated
+# again
 # by ":" to specify the priority. Thus, the required format becomes
 # <datacenter_path>:<datastore_name>:<optional_weight>.
 #
 # When adding an image, the datastore with highest weight will be
 # selected, unless there is not enough free space available in cases
 # where the image size is already known. If no weight is given, it is
-# assumed to be zero and the directory will be considered for selection
+# assumed to be zero and the directory will be considered for
+# selection
 # last. If multiple datastores have the same weight, then the one with
 # the most free space available is selected.
 #
@@ -2320,64 +2365,177 @@
 #  (multi valued)
 #vmware_datastores =
 
-
 [oslo_concurrency]
 
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory should
-# only be writable by the user running the processes that need locking. Defaults
-# to environment variable OSLO_LOCK_PATH. If external locks are used, a lock
-# path must be set. (string value)
-#lock_path = <None>
-
+[database]
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = mysql+pymysql://glance:opnfv_secret@172.16.10.36/glance?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 280
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
+#db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 [oslo_policy]
-
 #
 # From oslo.policy
 #
 
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
 #enforce_scope = false
 
 # The file that defines policies. (string value)
 #policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
+policy_file = /etc/glance/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
 #policy_default_rule = default
 
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
 #policy_dirs = policy.d
 
-# Content Type to send and receive data for REST based policy check (string
-# value)
+# Content Type to send and receive data for REST based policy check
+# (string value)
 # Possible values:
 # application/x-www-form-urlencoded - <No description provided>
 # application/json - <No description provided>
 #remote_content_type = application/x-www-form-urlencoded
 
-# server identity verification for REST based policy check (boolean value)
+# server identity verification for REST based policy check (boolean
+# value)
 #remote_ssl_verify_server_crt = false
 
-# Absolute path to ca cert file for REST based policy check (string value)
+# Absolute path to ca cert file for REST based policy check (string
+# value)
 #remote_ssl_ca_crt_file = <None>
 
-# Absolute path to client cert for REST based policy check (string value)
+# Absolute path to client cert for REST based policy check (string
+# value)
 #remote_ssl_client_crt_file = <None>
 
 # Absolute path client key file REST based policy check (string value)

2019-11-21 06:32:32,980 [salt.state       :1951][INFO    ][26952] Completed state [/etc/glance/glance-scrubber.conf] at time 06:32:32.980731 duration_in_ms=143.55
2019-11-21 06:32:32,981 [salt.state       :1780][INFO    ][26952] Running state [/etc/glance/glance-api.conf] at time 06:32:32.981491
2019-11-21 06:32:32,981 [salt.state       :1813][INFO    ][26952] Executing state file.managed for [/etc/glance/glance-api.conf]
2019-11-21 06:32:32,999 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'glance/files/rocky/glance-api.conf.Debian'
2019-11-21 06:32:33,168 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2019-11-21 06:32:33,212 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_amqp.conf'
2019-11-21 06:32:33,226 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2019-11-21 06:32:33,245 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2019-11-21 06:32:33,387 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_cors.conf'
2019-11-21 06:32:33,410 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2019-11-21 06:32:33,429 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/castellan/_barbican.conf'
2019-11-21 06:32:33,472 [salt.state       :300 ][INFO    ][26952] File changed:
--- 
+++ 
@@ -1,16 +1,224 @@
+
+
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
 
 #
 # From glance.api
 #
 
-# DEPRECATED:
+#
 # Set the image owner to tenant or the authenticated user.
 #
-# Assign a boolean value to determine the owner of an image. When set to
+# Assign a boolean value to determine the owner of an image. When set
+# to
 # True, the owner of the image is the tenant. When set to False, the
-# owner of the image will be the authenticated user issuing the request.
-# Setting it to False makes the image private to the associated user and
+# owner of the image will be the authenticated user issuing the
+# request.
+# Setting it to False makes the image private to the associated user
+# and
 # sharing with other users within the same tenant (or "project")
 # requires explicit image sharing via image membership.
 #
@@ -22,15 +230,6 @@
 #     * None
 #
 #  (boolean value)
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# The non-default setting for this option misaligns Glance with other
-# OpenStack services with respect to resource ownership.  Further, surveys
-# indicate that this option is not used by operators.  The option will be
-# removed early in the 'S' development cycle following the standard OpenStack
-# deprecation policy.  As the option is not in wide use, no migration path is
-# proposed.
 #owner_is_tenant = true
 
 #
@@ -74,7 +273,8 @@
 #
 # Provide  an integer value to limit the length of the request ID to
 # the specified length. The default value is 64. Users can change this
-# to any ineteger value between 0 and 16384 however keeping in mind that
+# to any ineteger value between 0 and 16384 however keeping in mind
+# that
 # a larger value may flood the logs.
 #
 # Possible values:
@@ -132,44 +332,11 @@
 #  (boolean value)
 #allow_additional_image_properties = true
 
-# "
-# Secure hashing algorithm used for computing the 'os_hash_value' property.
-#
-# This option configures the Glance "multihash", which consists of two
-# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
-# 'os_hash_algo' will be populated by the value of this configuration
-# option, and the 'os_hash_value' will be populated by the hexdigest computed
-# when the algorithm is applied to the uploaded or imported image data.
-#
-# The value must be a valid secure hash algorithm name recognized by the
-# python 'hashlib' library.  You can determine what these are by examining
-# the 'hashlib.algorithms_available' data member of the version of the
-# library being used in your Glance installation.  For interoperability
-# purposes, however, we recommend that you use the set of secure hash
-# names supplied by the 'hashlib.algorithms_guaranteed' data member because
-# those algorithms are guaranteed to be supported by the 'hashlib' library
-# on all platforms.  Thus, any image consumer using 'hashlib' locally should
-# be able to verify the 'os_hash_value' of the image.
-#
-# The default value of 'sha512' is a performant secure hash algorithm.
-#
-# If this option is misconfigured, any attempts to store image data will fail.
-# For that reason, we recommend using the default value.
-#
-# Possible values:
-#     * Any secure hash algorithm name recognized by the Python 'hashlib'
-#       library
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#hashing_algorithm = sha512
-
 #
 # Maximum number of image members per image.
 #
-# This limits the maximum of users an image can be shared with. Any negative
+# This limits the maximum of users an image can be shared with. Any
+# negative
 # value is interpreted as unlimited.
 #
 # Related options:
@@ -181,10 +348,12 @@
 #
 # Maximum number of properties allowed on an image.
 #
-# This enforces an upper limit on the number of additional properties an image
+# This enforces an upper limit on the number of additional properties
+# an image
 # can have. Any negative value is interpreted as unlimited.
 #
-# NOTE: This won't have any impact if additional properties are disabled. Please
+# NOTE: This won't have any impact if additional properties are
+# disabled. Please
 # refer to ``allow_additional_image_properties``.
 #
 # Related options:
@@ -241,7 +410,8 @@
 #
 # Finally, when this configuration option is set to
 # ``glance.db.simple.api``, image catalog data is stored in and read
-# from an in-memory data structure. This is primarily used for testing.
+# from an in-memory data structure. This is primarily used for
+# testing.
 #
 # Related options:
 #     * enable_v2_api
@@ -254,8 +424,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -284,6 +454,7 @@
 #  (integer value)
 # Minimum value: 1
 #limit_param_default = 25
+limit_param_default = 25
 
 #
 # Maximum number of results that could be returned by a request.
@@ -309,6 +480,7 @@
 #  (integer value)
 # Minimum value: 1
 #api_limit_max = 1000
+api_limit_max = 1000
 
 #
 # Show direct image location when returning an image.
@@ -341,6 +513,7 @@
 #
 #  (boolean value)
 #show_image_direct_url = false
+show_image_direct_url = true
 
 # DEPRECATED:
 # Show all image locations when returning an image.
@@ -372,9 +545,11 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
-# Please see the Newton release notes for more information.
+# Reason: This option will be removed in the Pike release or later
+# because the same functionality can be achieved with greater
+# granularity by using policies. Please see the Newton release notes
+# for more information.
+#show_multiple_locations = false
 #show_multiple_locations = false
 
 #
@@ -406,18 +581,25 @@
 #
 # Maximum amount of image storage per tenant.
 #
-# This enforces an upper limit on the cumulative storage consumed by all images
+# This enforces an upper limit on the cumulative storage consumed by
+# all images
 # of a tenant across all stores. This is a per-tenant limit.
 #
-# The default unit for this configuration option is Bytes. However, storage
-# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
-# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
-# TeraBytes respectively. Note that there should not be any space between the
-# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# The default unit for this configuration option is Bytes. However,
+# storage
+# units can be specified using case-sensitive literals ``B``, ``KB``,
+# ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes,
+# GigaBytes and
+# TeraBytes respectively. Note that there should not be any space
+# between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative
+# values
 # are invalid and result in errors.
 #
 # Possible values:
-#     * A string that is a valid concatenation of a non-negative integer
+#     * A string that is a valid concatenation of a non-negative
+# integer
 #       representing the storage value and an optional string literal
 #       representing storage units as mentioned above.
 #
@@ -426,6 +608,41 @@
 #
 #  (string value)
 #user_storage_quota = 0
+
+#
+# Deploy the v1 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond to
+# requests on registered endpoints conforming to the v1 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is enabled, then ``enable_v1_registry`` must
+#       also be set to ``True`` to enable mandatory usage of Registry
+#       service with v1 API.
+#
+#     * If this option is disabled, then the ``enable_v1_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+#     * This option is separate from ``enable_v2_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v2 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_registry
+#     * enable_v2_api
+#
+#  (boolean value)
+#enable_v1_api = true
+enable_v1_api=False
 
 #
 # Deploy the v2 OpenStack Images API.
@@ -439,18 +656,45 @@
 #       option, which is enabled by default, is also recommended
 #       to be disabled.
 #
+#     * This option is separate from ``enable_v1_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v1 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
 # Possible values:
 #     * True
 #     * False
 #
 # Related options:
 #     * enable_v2_registry
+#     * enable_v1_api
 #
 #  (boolean value)
 #enable_v2_api = true
-
-#
-#                     DEPRECATED FOR REMOVAL
+enable_v2_api=True
+
+#
+# Deploy the v1 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v1 API requests.
+#
+# NOTES:
+#     * Use of Registry is mandatory in v1 API, so this option must
+#       be set to ``True`` if the ``enable_v1_api`` option is enabled.
+#
+#     * If deploying only the v2 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_api
+#
 #  (boolean value)
 #enable_v1_registry = true
 
@@ -484,8 +728,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -503,7 +747,7 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -590,18 +834,43 @@
 #
 # Related options:
 #     * [task]/work_dir
+#     * [DEFAULT]/enable_image_import (*deprecated*)
 #
 #  (string value)
 #node_staging_uri = file:///tmp/staging/
 
+# DEPRECATED:
+# Enables the Image Import workflow introduced in Pike
+#
+# As '[DEFAULT]/node_staging_uri' is required for the Image
+# Import, it's disabled per default in Pike, enabled per
+# default in Queens and removed in Rocky. This allows Glance to
+# operate with previous version configs upon upgrade.
+#
+# Setting this option to False will disable the endpoints related
+# to Image Import Refactoring work.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (boolean value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated for removal in Rocky.
+#
+# It was introduced to make sure that the API is not enabled
+# before the '[DEFAULT]/node_staging_uri' is defined and is
+# long term redundant.
+#enable_image_import = true
+
 #
 # List of enabled Image Import Methods
 #
 # Both 'glance-direct' and 'web-download' are enabled by default.
 #
 # Related options:
-#     * [DEFAULT]/node_staging_uri (list value)
-#enabled_import_methods = [glance-direct,web-download]
+#     * [DEFAULT]/node_staging_uri
+#     * [DEFAULT]/enable_image_import (list value)
+#enabled_import_methods = glance-direct,web-download
 
 #
 # Strategy to determine the preference order of image locations.
@@ -632,6 +901,9 @@
 # store_type - <No description provided>
 #location_strategy = location_order
 
+location_strategy = location_order
+
+
 #
 # The location of the property protection file.
 #
@@ -646,7 +918,8 @@
 # protections won't be enforced. If a value is specified and the file
 # is not found, the glance-api service will fail to start.
 # More information on property protections can be found at:
-# https://docs.openstack.org/glance/latest/admin/property-protections.html
+# https://docs.openstack.org/glance/latest/admin/property-
+# protections.html
 #
 # Possible values:
 #     * Empty string
@@ -726,8 +999,9 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #bind_host = 0.0.0.0
+bind_host = 172.16.10.36
 
 #
 # Port number on which the server will listen.
@@ -747,6 +1021,7 @@
 # Minimum value: 0
 # Maximum value: 65535
 #bind_port = <None>
+bind_port = 9292
 
 #
 # Number of Glance worker processes to start.
@@ -755,7 +1030,8 @@
 # process workers to service requests. By default, the number of CPUs
 # available is set as the value for ``workers`` limited to 8. For
 # example if the processor count is 6, 6 workers will be used, if the
-# processor count is 24 only 8 workers will be used. The limit will only
+# processor count is 24 only 8 workers will be used. The limit will
+# only
 # apply to the default value, if 24 workers is configured, 24 is used.
 #
 # Each worker process is made to listen on the port set in the
@@ -774,6 +1050,7 @@
 #  (integer value)
 # Minimum value: 0
 #workers = <None>
+workers = 1
 
 #
 # Maximum line size of message headers.
@@ -943,21 +1220,25 @@
 #  (string value)
 #key_file = /etc/ssl/key/key-file.pem
 
-# DEPRECATED: The HTTP header used to determine the scheme for the original
-# request, even if it was removed by an SSL terminating proxy. Typical value is
-# "HTTP_X_FORWARDED_PROTO". (string value)
+# DEPRECATED: The HTTP header used to determine the scheme for the
+# original request, even if it was removed by an SSL terminating
+# proxy. Typical value is "HTTP_X_FORWARDED_PROTO". (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Use the http_proxy_to_wsgi middleware instead.
 #secure_proxy_ssl_header = <None>
 
 #
-# The relative path to sqlite file database that will be used for image cache
+# The relative path to sqlite file database that will be used for
+# image cache
 # management.
 #
-# This is a relative path to the sqlite file database that tracks the age and
-# usage statistics of image cache. The path is relative to image cache base
-# directory, specified by the configuration option ``image_cache_dir``.
+# This is a relative path to the sqlite file database that tracks the
+# age and
+# usage statistics of image cache. The path is relative to image cache
+# base
+# directory, specified by the configuration option
+# ``image_cache_dir``.
 #
 # This is a lightweight database with just one table.
 #
@@ -973,23 +1254,33 @@
 #
 # The driver to use for image cache management.
 #
-# This configuration option provides the flexibility to choose between the
-# different image-cache drivers available. An image-cache driver is responsible
-# for providing the essential functions of image-cache like write images to/read
-# images from cache, track age and usage of cached images, provide a list of
-# cached images, fetch size of the cache, queue images for caching and clean up
+# This configuration option provides the flexibility to choose between
+# the
+# different image-cache drivers available. An image-cache driver is
+# responsible
+# for providing the essential functions of image-cache like write
+# images to/read
+# images from cache, track age and usage of cached images, provide a
+# list of
+# cached images, fetch size of the cache, queue images for caching and
+# clean up
 # the cache, etc.
 #
 # The essential functions of a driver are defined in the base class
-# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers (existing
-# and prospective) must implement this interface. Currently available drivers
-# are ``sqlite`` and ``xattr``. These drivers primarily differ in the way they
+# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers
+# (existing
+# and prospective) must implement this interface. Currently available
+# drivers
+# are ``sqlite`` and ``xattr``. These drivers primarily differ in the
+# way they
 # store the information about cached images:
-#     * The ``sqlite`` driver uses a sqlite database (which sits on every glance
+#     * The ``sqlite`` driver uses a sqlite database (which sits on
+# every glance
 #     node locally) to track the usage of cached images.
-#     * The ``xattr`` driver uses the extended attributes of files to store this
-#     information. It also requires a filesystem that sets ``atime`` on the
-# files
+#     * The ``xattr`` driver uses the extended attributes of files to
+# store this
+#     information. It also requires a filesystem that sets ``atime``
+# on the files
 #     when accessed.
 #
 # Possible values:
@@ -1006,21 +1297,32 @@
 #image_cache_driver = sqlite
 
 #
-# The upper limit on cache size, in bytes, after which the cache-pruner cleans
+# The upper limit on cache size, in bytes, after which the cache-
+# pruner cleans
 # up the image cache.
 #
-# NOTE: This is just a threshold for cache-pruner to act upon. It is NOT a
-# hard limit beyond which the image cache would never grow. In fact, depending
-# on how often the cache-pruner runs and how quickly the cache fills, the image
-# cache can far exceed the size specified here very easily. Hence, care must be
-# taken to appropriately schedule the cache-pruner and in setting this limit.
-#
-# Glance caches an image when it is downloaded. Consequently, the size of the
-# image cache grows over time as the number of downloads increases. To keep the
+# NOTE: This is just a threshold for cache-pruner to act upon. It is
+# NOT a
+# hard limit beyond which the image cache would never grow. In fact,
+# depending
+# on how often the cache-pruner runs and how quickly the cache fills,
+# the image
+# cache can far exceed the size specified here very easily. Hence,
+# care must be
+# taken to appropriately schedule the cache-pruner and in setting this
+# limit.
+#
+# Glance caches an image when it is downloaded. Consequently, the size
+# of the
+# image cache grows over time as the number of downloads increases. To
+# keep the
 # cache size from becoming unmanageable, it is recommended to run the
-# cache-pruner as a periodic task. When the cache pruner is kicked off, it
-# compares the current size of image cache and triggers a cleanup if the image
-# cache grew beyond the size specified here. After the cleanup, the size of
+# cache-pruner as a periodic task. When the cache pruner is kicked
+# off, it
+# compares the current size of image cache and triggers a cleanup if
+# the image
+# cache grew beyond the size specified here. After the cleanup, the
+# size of
 # cache is less than or equal to size specified here.
 #
 # Possible values:
@@ -1033,19 +1335,29 @@
 # Minimum value: 0
 #image_cache_max_size = 10737418240
 
-#
-# The amount of time, in seconds, an incomplete image remains in the cache.
-#
-# Incomplete images are images for which download is in progress. Please see the
-# description of configuration option ``image_cache_dir`` for more detail.
-# Sometimes, due to various reasons, it is possible the download may hang and
-# the incompletely downloaded image remains in the ``incomplete`` directory.
-# This configuration option sets a time limit on how long the incomplete images
-# should remain in the ``incomplete`` directory before they are cleaned up.
-# Once an incomplete image spends more time than is specified here, it'll be
+
+#
+# The amount of time, in seconds, an incomplete image remains in the
+# cache.
+#
+# Incomplete images are images for which download is in progress.
+# Please see the
+# description of configuration option ``image_cache_dir`` for more
+# detail.
+# Sometimes, due to various reasons, it is possible the download may
+# hang and
+# the incompletely downloaded image remains in the ``incomplete``
+# directory.
+# This configuration option sets a time limit on how long the
+# incomplete images
+# should remain in the ``incomplete`` directory before they are
+# cleaned up.
+# Once an incomplete image spends more time than is specified here,
+# it'll be
 # removed by cache-cleaner on its next run.
 #
-# It is recommended to run cache-cleaner as a periodic task on the Glance API
+# It is recommended to run cache-cleaner as a periodic task on the
+# Glance API
 # nodes to keep the incomplete images from occupying disk space.
 #
 # Possible values:
@@ -1061,25 +1373,39 @@
 #
 # Base directory for image cache.
 #
-# This is the location where image data is cached and served out of. All cached
-# images are stored directly under this directory. This directory also contains
-# three subdirectories, namely, ``incomplete``, ``invalid`` and ``queue``.
-#
-# The ``incomplete`` subdirectory is the staging area for downloading images. An
-# image is first downloaded to this directory. When the image download is
-# successful it is moved to the base directory. However, if the download fails,
-# the partially downloaded image file is moved to the ``invalid`` subdirectory.
-#
-# The ``queue``subdirectory is used for queuing images for download. This is
-# used primarily by the cache-prefetcher, which can be scheduled as a periodic
-# task like cache-pruner and cache-cleaner, to cache images ahead of their
-# usage.
-# Upon receiving the request to cache an image, Glance touches a file in the
-# ``queue`` directory with the image id as the file name. The cache-prefetcher,
+# This is the location where image data is cached and served out of.
+# All cached
+# images are stored directly under this directory. This directory also
+# contains
+# three subdirectories, namely, ``incomplete``, ``invalid`` and
+# ``queue``.
+#
+# The ``incomplete`` subdirectory is the staging area for downloading
+# images. An
+# image is first downloaded to this directory. When the image download
+# is
+# successful it is moved to the base directory. However, if the
+# download fails,
+# the partially downloaded image file is moved to the ``invalid``
+# subdirectory.
+#
+# The ``queue``subdirectory is used for queuing images for download.
+# This is
+# used primarily by the cache-prefetcher, which can be scheduled as a
+# periodic
+# task like cache-pruner and cache-cleaner, to cache images ahead of
+# their usage.
+# Upon receiving the request to cache an image, Glance touches a file
+# in the
+# ``queue`` directory with the image id as the file name. The cache-
+# prefetcher,
 # when running, polls for the files in ``queue`` directory and starts
-# downloading them in the order they were created. When the download is
-# successful, the zero-sized file is deleted from the ``queue`` directory.
-# If the download fails, the zero-sized file remains and it'll be retried the
+# downloading them in the order they were created. When the download
+# is
+# successful, the zero-sized file is deleted from the ``queue``
+# directory.
+# If the download fails, the zero-sized file remains and it'll be
+# retried the
 # next time cache-prefetcher runs.
 #
 # Possible values:
@@ -1147,16 +1473,17 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
 # Reason:
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_host = 0.0.0.0
+registry_host = 172.16.10.36
 
 # DEPRECATED:
 # Port the registry server is listening on.
@@ -1176,83 +1503,90 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_port = 9191
-
-# DEPRECATED: Whether to pass through the user token when making requests to the
-# registry. To prevent failures with token expiration during big files upload,
-# it is recommended to set this parameter to False.If "use_user_token" is not in
-# effect, then admin credentials can be specified. (boolean value)
+registry_port = 9191
+
+# DEPRECATED: Whether to pass through the user token when making
+# requests to the registry. To prevent failures with token expiration
+# during big files upload, it is recommended to set this parameter to
+# False.If "use_user_token" is not in effect, then admin credentials
+# can be specified. (boolean value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #use_user_token = true
 
-# DEPRECATED: The administrators user name. If "use_user_token" is not in
-# effect, then admin credentials can be specified. (string value)
+# DEPRECATED: The administrators user name. If "use_user_token" is not
+# in effect, then admin credentials can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_user = <None>
 
-# DEPRECATED: The administrators password. If "use_user_token" is not in effect,
-# then admin credentials can be specified. (string value)
+# DEPRECATED: The administrators password. If "use_user_token" is not
+# in effect, then admin credentials can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_password = <None>
 
-# DEPRECATED: The tenant name of the administrative user. If "use_user_token" is
-# not in effect, then admin tenant name can be specified. (string value)
+# DEPRECATED: The tenant name of the administrative user. If
+# "use_user_token" is not in effect, then admin tenant name can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_tenant_name = <None>
 
-# DEPRECATED: The URL to the keystone service. If "use_user_token" is not in
-# effect and using keystone auth, then URL of keystone can be specified. (string
-# value)
+# DEPRECATED: The URL to the keystone service. If "use_user_token" is
+# not in effect and using keystone auth, then URL of keystone can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_url = <None>
 
-# DEPRECATED: The strategy to use for authentication. If "use_user_token" is not
-# in effect, then auth strategy can be specified. (string value)
+# DEPRECATED: The strategy to use for authentication. If
+# "use_user_token" is not in effect, then auth strategy can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_strategy = noauth
 
-# DEPRECATED: The region for the authentication service. If "use_user_token" is
-# not in effect and using keystone auth, then region name can be specified.
-# (string value)
+# DEPRECATED: The region for the authentication service. If
+# "use_user_token" is not in effect and using keystone auth, then
+# region name can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_region = <None>
+#
+#auth_region = RegionOne
+#
 
 # DEPRECATED:
 # Protocol to use for communication with the registry server.
@@ -1287,8 +1621,9 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
+#registry_client_protocol = http
 #registry_client_protocol = http
 
 # DEPRECATED:
@@ -1316,8 +1651,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_key_file = /etc/ssl/key/key-file.pem
 
 # DEPRECATED:
@@ -1346,8 +1681,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_cert_file = /etc/ssl/certs/file.crt
 
 # DEPRECATED:
@@ -1378,9 +1713,10 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_ca_file = /etc/ssl/cafile/file.ca
+#
 
 # DEPRECATED:
 # Set verification of the registry server certificate.
@@ -1410,8 +1746,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_insecure = false
 
 # DEPRECATED:
@@ -1438,8 +1774,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_timeout = 600
 
 #
@@ -1478,15 +1814,22 @@
 #
 # The amount of time, in seconds, to delay image scrubbing.
 #
-# When delayed delete is turned on, an image is put into ``pending_delete``
-# state upon deletion until the scrubber deletes its image data. Typically, soon
-# after the image is put into ``pending_delete`` state, it is available for
-# scrubbing. However, scrubbing can be delayed until a later point using this
-# configuration option. This option denotes the time period an image spends in
+# When delayed delete is turned on, an image is put into
+# ``pending_delete``
+# state upon deletion until the scrubber deletes its image data.
+# Typically, soon
+# after the image is put into ``pending_delete`` state, it is
+# available for
+# scrubbing. However, scrubbing can be delayed until a later point
+# using this
+# configuration option. This option denotes the time period an image
+# spends in
 # ``pending_delete`` state before it is available for scrubbing.
 #
-# It is important to realize that this has storage implications. The larger the
-# ``scrub_time``, the longer the time to reclaim backend storage from deleted
+# It is important to realize that this has storage implications. The
+# larger the
+# ``scrub_time``, the longer the time to reclaim backend storage from
+# deleted
 # images.
 #
 # Possible values:
@@ -1502,11 +1845,16 @@
 #
 # The size of thread pool to be used for scrubbing images.
 #
-# When there are a large number of images to scrub, it is beneficial to scrub
-# images in parallel so that the scrub queue stays in control and the backend
-# storage is reclaimed in a timely fashion. This configuration option denotes
-# the maximum number of images to be scrubbed in parallel. The default value is
-# one, which signifies serial scrubbing. Any value above one indicates parallel
+# When there are a large number of images to scrub, it is beneficial
+# to scrub
+# images in parallel so that the scrub queue stays in control and the
+# backend
+# storage is reclaimed in a timely fashion. This configuration option
+# denotes
+# the maximum number of images to be scrubbed in parallel. The default
+# value is
+# one, which signifies serial scrubbing. Any value above one indicates
+# parallel
 # scrubbing.
 #
 # Possible values:
@@ -1522,19 +1870,28 @@
 #
 # Turn on/off delayed delete.
 #
-# Typically when an image is deleted, the ``glance-api`` service puts the image
-# into ``deleted`` state and deletes its data at the same time. Delayed delete
-# is a feature in Glance that delays the actual deletion of image data until a
+# Typically when an image is deleted, the ``glance-api`` service puts
+# the image
+# into ``deleted`` state and deletes its data at the same time.
+# Delayed delete
+# is a feature in Glance that delays the actual deletion of image data
+# until a
 # later point in time (as determined by the configuration option
 # ``scrub_time``).
-# When delayed delete is turned on, the ``glance-api`` service puts the image
-# into ``pending_delete`` state upon deletion and leaves the image data in the
-# storage backend for the image scrubber to delete at a later time. The image
-# scrubber will move the image into ``deleted`` state upon successful deletion
+# When delayed delete is turned on, the ``glance-api`` service puts
+# the image
+# into ``pending_delete`` state upon deletion and leaves the image
+# data in the
+# storage backend for the image scrubber to delete at a later time.
+# The image
+# scrubber will move the image into ``deleted`` state upon successful
+# deletion
 # of image data.
 #
-# NOTE: When delayed delete is turned on, image scrubber MUST be running as a
-# periodic task to prevent the backend storage from filling up with undesired
+# NOTE: When delayed delete is turned on, image scrubber MUST be
+# running as a
+# periodic task to prevent the backend storage from filling up with
+# undesired
 # usage.
 #
 # Possible values:
@@ -1548,462 +1905,504 @@
 #
 #  (boolean value)
 #delayed_delete = false
-
 #
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
 #watch_log_file = false
 
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
 # value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message is
-# DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+[image_format]
+
+#
+# From glance.api
+#
+
+# Supported values for the 'container_format' image attribute (list
 # value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
+# Deprecated group/name - [DEFAULT]/container_formats
+#container_formats = ami,ari,aki,bare,ovf,ova,docker
+
+# Supported values for the 'disk_format' image attribute (list value)
+# Deprecated group/name - [DEFAULT]/disk_formats
+#disk_formats = ami,ari,aki,vhd,vhdx,vmdk,raw,qcow2,vdi,iso,ploop,root-tar
+
+
+[paste_deploy]
+
+#
+# From glance.api
+#
+
+#
+# Deployment flavor to use in the server application pipeline.
+#
+# Provide a string value representing the appropriate deployment
+# flavor used in the server application pipleline. This is typically
+# the partial name of a pipeline in the paste configuration file with
+# the service name removed.
+#
+# For example, if your paste section name in the paste configuration
+# file is [pipeline:glance-api-keystone], set ``flavor`` to
+# ``keystone``.
+#
+# Possible values:
+#     * String value representing a partial pipeline name.
+#
+# Related Options:
+#     * config_file
+#
+#  (string value)
+#flavor = keystone
+flavor = keystone
+
+#
+# Name of the paste configuration file.
+#
+# Provide a string value representing the name of the paste
+# configuration file to use for configuring piplelines for
+# server application deployments.
+#
+# NOTES:
+#     * Provide the name or the path relative to the glance directory
+#       for the paste configuration file and not the absolute path.
+#     * The sample paste configuration file shipped with Glance need
+#       not be edited in most cases as it comes with ready-made
+#       pipelines for all common deployment flavors.
+#
+# If no value is specified for this option, the ``paste.ini`` file
+# with the prefix of the corresponding Glance service's configuration
+# file name will be searched for in the known configuration
+# directories. (For example, if this option is missing from or has no
+# value set in ``glance-api.conf``, the service will look for a file
+# named ``glance-api-paste.ini``.) If the paste configuration file is
+# not found, the service will not start.
+#
+# Possible values:
+#     * A string value representing the name of the paste
+# configuration
+#       file.
+#
+# Related Options:
+#     * flavor
+#
+#  (string value)
+#config_file = glance-api-paste.ini
+
+
+[profiler]
+
+#
+# From glance.api
+#
+
+#
+# Enables the profiling for all services on this node. Default value
+# is False
+# (fully disable the profiling feature).
+#
+# Possible values:
+#
+# * True: Enables the feature
+# * False: Disables the feature. The profiling cannot be started via
+# this project
+# operations. If the profiling is triggered by another project, this
+# project part
+# will be empty.
+#  (boolean value)
+# Deprecated group/name - [profiler]/profiler_enabled
+#enabled = false
+
+#
+# Enables SQL requests profiling in services. Default value is False
+# (SQL
+# requests won't be traced).
+#
+# Possible values:
+#
+# * True: Enables SQL requests profiling. Each SQL query will be part
+# of the
+# trace and can the be analyzed by how much time was spent for that.
+# * False: Disables SQL requests profiling. The spent time is only
+# shown on a
+# higher level of operations. Single SQL queries cannot be analyzed
+# this
+# way.
+#  (boolean value)
+#trace_sqlalchemy = false
+
+#
+# Secret key(s) to use for encrypting context data for performance
+# profiling.
+# This string value should have the following format:
+# <key1>[,<key2>,...<keyn>],
+# where each key is some random string. A user who triggers the
+# profiling via
+# the REST API has to set one of these keys in the headers of the REST
+# API call
+# to include profiling results of this node for this particular
+# project.
+#
+# Both "enabled" flag and "hmac_keys" config options should be set to
+# enable
+# profiling. Also, to generate correct profiling information across
+# all services
+# at least one key needs to be consistent between OpenStack projects.
+# This
+# ensures it can be used from client side to generate the trace,
+# containing
+# information from all possible resources. (string value)
+#hmac_keys = SECRET_KEY
+
+#
+# Connection string for a notifier backend. Default value is
+# messaging:// which
+# sets the notifier to oslo_messaging.
+#
+# Examples of possible values:
+#
+# * messaging://: use oslo_messaging driver for sending notifications.
+# * mongodb://127.0.0.1:27017 : use mongodb driver for sending
+# notifications.
+# * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for
+# sending
+# notifications.
+#  (string value)
+#connection_string = messaging://
+
+#
+# Document type for notification indexing in elasticsearch.
+#  (string value)
+#es_doc_type = notification
+
+#
+# This parameter is a time value parameter (for example:
+# es_scroll_time=2m),
+# indicating for how long the nodes that participate in the search
+# will maintain
+# relevant resources in order to continue and support it.
+#  (string value)
+#es_scroll_time = 2m
+
+#
+# Elasticsearch splits large requests in batches. This parameter
+# defines
+# maximum size of each batch (for example: es_scroll_size=10000).
+#  (integer value)
+#es_scroll_size = 10000
+
+#
+# Redissentinel provides a timeout option on the connections.
+# This parameter defines that timeout (for example:
+# socket_timeout=0.1).
+#  (floating point value)
+#socket_timeout = 0.1
+
+#
+# Redissentinel uses a service name to identify a master redis
+# service.
+# This parameter defines the name (for example:
+# sentinal_service_name=mymaster).
+#  (string value)
+#sentinel_service_name = mymaster
+
+
+[store_type_location_strategy]
+
+#
+# From glance.api
+#
+
+#
+# Preference order of storage backends.
+#
+# Provide a comma separated list of store names in the order in
+# which images should be retrieved from storage backends.
+# These store names must be registered with the ``stores``
+# configuration option.
+#
+# NOTE: The ``store_type_preference`` configuration option is applied
+# only if ``store_type`` is chosen as a value for the
+# ``location_strategy`` configuration option. An empty list will not
+# change the location order.
+#
+# Possible values:
+#     * Empty list
+#     * Comma separated list of registered store names. Legal values
+# are:
+#         * file
+#         * http
+#         * rbd
+#         * swift
+#         * sheepdog
+#         * cinder
+#         * vmware
+#
+# Related options:
+#     * location_strategy
+#     * stores
+#
+#  (list value)
+#store_type_preference =
+
+
+[task]
+
+#
+# From glance.api
+#
+
+# Time in hours for which a task lives after, either succeeding or
+# failing (integer value)
+# Deprecated group/name - [DEFAULT]/task_time_to_live
+#task_time_to_live = 48
+
+#
+# Task executor to be used to run task scripts.
+#
+# Provide a string value representing the executor to use for task
+# executions. By default, ``TaskFlow`` executor is used.
+#
+# ``TaskFlow`` helps make task executions easy, consistent, scalable
+# and reliable. It also enables creation of lightweight task objects
+# and/or functions that are combined together into flows in a
+# declarative manner.
+#
+# Possible values:
+#     * taskflow
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#task_executor = taskflow
+
+#
+# Absolute path to the work directory to use for asynchronous
+# task operations.
+#
+# The directory set here will be used to operate over images -
+# normally before they are imported in the destination store.
+#
+# NOTE: When providing a value for ``work_dir``, please make sure
+# that enough space is provided for concurrent tasks to run
+# efficiently without running out of space.
+#
+# A rough estimation can be done by multiplying the number of
+# ``max_workers`` with an average image size (e.g 500MB). The image
+# size estimation should be done based on the average size in your
+# deployment. Note that depending on the tasks running you may need
+# to multiply this number by some factor depending on what the task
+# does. For example, you may want to double the available size if
+# image conversion is enabled. All this being said, remember these
+# are just estimations and you should do them based on the worst
+# case scenario and be prepared to act in case they were wrong.
+#
+# Possible values:
+#     * String value representing the absolute path to the working
+#       directory
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#work_dir = /work_dir
+
+
+[taskflow_executor]
+
+#
+# From glance.api
+#
+
+#
+# Set the taskflow engine mode.
+#
+# Provide a string type value to set the mode in which the taskflow
+# engine would schedule tasks to the workers on the hosts. Based on
+# this mode, the engine executes tasks either in single or multiple
+# threads. The possible values for this configuration option are:
+# ``serial`` and ``parallel``. When set to ``serial``, the engine runs
+# all the tasks in a single thread which results in serial execution
+# of tasks. Setting this to ``parallel`` makes the engine run tasks in
+# multiple threads. This results in parallel execution of tasks.
+#
+# Possible values:
+#     * serial
+#     * parallel
+#
+# Related options:
+#     * max_workers
+#
+#  (string value)
+# Possible values:
+# serial - <No description provided>
+# parallel - <No description provided>
+#engine_mode = parallel
+
+#
+# Set the number of engine executable tasks.
+#
+# Provide an integer value to limit the number of workers that can be
+# instantiated on the hosts. In other words, this number defines the
+# number of parallel tasks that can be executed at the same time by
+# the taskflow engine. This value can be greater than one when the
+# engine mode is set to parallel.
+#
+# Possible values:
+#     * Integer value greater than or equal to 1
+#
+# Related options:
+#     * engine_mode
+#
+#  (integer value)
 # Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Image-Meta-Checksum,X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request. (list
-# value)
-#allow_headers = Content-MD5,X-Image-Meta-Checksum,X-Storage-Token,Accept-Encoding,X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
-
-
-[database]
-connection = sqlite:////var/lib/glance/glance.sqlite
-backend = sqlalchemy
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
-# Deprecated group/name - [DATABASE]/idle_timeout
-# Deprecated group/name - [database]/idle_timeout
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-#
-# From oslo.db.concurrency
-#
-
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
-
+# Deprecated group/name - [task]/eventlet_executor_pool_size
+#max_workers = 10
+
+#
+# Set the desired image conversion format.
+#
+# Provide a valid image format to which you want images to be
+# converted before they are stored for consumption by Glance.
+# Appropriate image format conversions are desirable for specific
+# storage backends in order to facilitate efficient handling of
+# bandwidth and usage of the storage infrastructure.
+#
+# By default, ``conversion_format`` is not set and must be set
+# explicitly in the configuration file.
+#
+# The allowed values for this option are ``raw``, ``qcow2`` and
+# ``vmdk``. The  ``raw`` format is the unstructured disk format and
+# should be chosen when RBD or Ceph storage backends are used for
+# image storage. ``qcow2`` is supported by the QEMU emulator that
+# expands dynamically and supports Copy on Write. The ``vmdk`` is
+# another common disk format supported by many common virtual machine
+# monitors like VMWare Workstation.
+#
+# Possible values:
+#     * qcow2
+#     * raw
+#     * vmdk
+#
+# Related options:
+#     * disk_formats
+#
+#  (string value)
+# Possible values:
+# qcow2 - <No description provided>
+# raw - <No description provided>
+# vmdk - <No description provided>
+#conversion_format = raw
 
 [glance_store]
 
@@ -2011,7 +2410,7 @@
 # From glance.store
 #
 
-# DEPRECATED:
+#
 # List of enabled Glance stores.
 #
 # Register the storage backends to use for storing disk images
@@ -2032,18 +2431,9 @@
 #     * default_store
 #
 #  (list value)
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``enabled_backends`` which helps to configure multiple backend stores
-# of different schemes.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #stores = file,http
 
-# DEPRECATED:
+#
 # The default scheme to use for storing images.
 #
 # Provide a string value representing the default scheme to use for
@@ -2085,18 +2475,11 @@
 # sheepdog - <No description provided>
 # cinder - <No description provided>
 # vsphere - <No description provided>
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``default_backend`` which acts similar to ``default_store`` config
-# option.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #default_store = file
-
-# DEPRECATED:
+default_store = file
+stores = file,http
+
+#
 # Minimum interval in seconds to execute updating dynamic storage
 # capabilities based on current backend status.
 #
@@ -2111,19 +2494,14 @@
 # By default, this option is set to zero and is disabled. Provide an
 # integer value greater than zero to enable this option.
 #
-# NOTE 1: For more information on store capabilities and their updates,
-# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
-# /store-capabilities.html
+# NOTE: For more information on store capabilities and their updates,
+# please visit: https://specs.openstack.org/openstack/glance-
+# specs/specs/kilo/store-capabilities.html
 #
 # For more information on setting up a particular store in your
 # deployment and help with the usage of this feature, please contact
 # the storage driver maintainers listed here:
-# https://docs.openstack.org/glance_store/latest/user/drivers.html
-#
-# NOTE 2: The dynamic store update capability described above is not
-# implemented by any current store drivers.  Thus, this option DOES
-# NOT DO ANYTHING (and it never has).  It is DEPRECATED and scheduled
-# for removal early in the Stein development cycle.
+# http://docs.openstack.org/developer/glance_store/drivers/index.html
 #
 # Possible values:
 #     * Zero
@@ -2134,15 +2512,6 @@
 #
 #  (integer value)
 # Minimum value: 0
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option configures a stub method that has not been implemented
-# for any existing store drivers.  Hence it is non-operational, and
-# giving it a value does absolutely nothing.
-#
-# This option is scheduled for removal early in the Stein development
-# cycle.
 #store_capabilities_update_min_interval = 0
 
 #
@@ -2151,16 +2520,20 @@
 # When the ``cinder_endpoint_template`` is not set and any of
 # ``cinder_store_auth_address``, ``cinder_store_user_name``,
 # ``cinder_store_project_name``, ``cinder_store_password`` is not set,
-# cinder store uses this information to lookup cinder endpoint from the service
-# catalog in the current context. ``cinder_os_region_name``, if set, is taken
+# cinder store uses this information to lookup cinder endpoint from
+# the service
+# catalog in the current context. ``cinder_os_region_name``, if set,
+# is taken
 # into consideration to fetch the appropriate endpoint.
 #
-# The service catalog can be listed by the ``openstack catalog list`` command.
+# The service catalog can be listed by the ``openstack catalog list``
+# command.
 #
 # Possible values:
 #     * A string of of the following form:
 #       ``<service_type>:<service_name>:<interface>``
-#       At least ``service_type`` and ``interface`` should be specified.
+#       At least ``service_type`` and ``interface`` should be
+# specified.
 #       ``service_name`` can be omitted.
 #
 # Related options:
@@ -2173,22 +2546,27 @@
 #
 #  (string value)
 #cinder_catalog_info = volumev2::publicURL
+cinder_catalog_info = volumev2::internalURL
 
 #
 # Override service catalog lookup with template for cinder endpoint.
 #
-# When this option is set, this value is used to generate cinder endpoint,
+# When this option is set, this value is used to generate cinder
+# endpoint,
 # instead of looking up from the service catalog.
 # This value is ignored if ``cinder_store_auth_address``,
 # ``cinder_store_user_name``, ``cinder_store_project_name``, and
 # ``cinder_store_password`` are specified.
 #
-# If this configuration option is set, ``cinder_catalog_info`` will be ignored.
-#
-# Possible values:
-#     * URL template string for cinder endpoint, where ``%%(tenant)s`` is
+# If this configuration option is set, ``cinder_catalog_info`` will be
+# ignored.
+#
+# Possible values:
+#     * URL template string for cinder endpoint, where ``%%(tenant)s``
+# is
 #       replaced with the current tenant (project) name.
-#       For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s``
+#       For example:
+# ``http://cinder.openstack.example.org/v2/%%(tenant)s``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -2203,10 +2581,14 @@
 #
 # Region name to lookup cinder service from the service catalog.
 #
-# This is used only when ``cinder_catalog_info`` is used for determining the
-# endpoint. If set, the lookup for cinder endpoint by this node is filtered to
-# the specified region. It is useful when multiple regions are listed in the
-# catalog. If this is not set, the endpoint is looked up from every region.
+# This is used only when ``cinder_catalog_info`` is used for
+# determining the
+# endpoint. If set, the lookup for cinder endpoint by this node is
+# filtered to
+# the specified region. It is useful when multiple regions are listed
+# in the
+# catalog. If this is not set, the endpoint is looked up from every
+# region.
 #
 # Possible values:
 #     * A string that is a valid region name.
@@ -2218,13 +2600,17 @@
 # Deprecated group/name - [glance_store]/os_region_name
 #cinder_os_region_name = <None>
 
+cinder_os_region_name = RegionOne
+
+
 #
 # Location of a CA certificates file used for cinder client requests.
 #
 # The specified CA certificates file, if set, is used to verify cinder
-# connections via HTTPS endpoint. If the endpoint is HTTP, this value is
-# ignored.
-# ``cinder_api_insecure`` must be set to ``True`` to enable the verification.
+# connections via HTTPS endpoint. If the endpoint is HTTP, this value
+# is ignored.
+# ``cinder_api_insecure`` must be set to ``True`` to enable the
+# verification.
 #
 # Possible values:
 #     * Path to a ca certificates file
@@ -2238,7 +2624,8 @@
 #
 # Number of cinderclient retries on failed http calls.
 #
-# When a call failed by any errors, cinderclient will retry the call up to the
+# When a call failed by any errors, cinderclient will retry the call
+# up to the
 # specified times after sleeping a few seconds.
 #
 # Possible values:
@@ -2255,11 +2642,16 @@
 # Time period, in seconds, to wait for a cinder volume transition to
 # complete.
 #
-# When the cinder volume is created, deleted, or attached to the glance node to
-# read/write the volume data, the volume's state is changed. For example, the
-# newly created volume status changes from ``creating`` to ``available`` after
-# the creation process is completed. This specifies the maximum time to wait for
-# the status change. If a timeout occurs while waiting, or the status is changed
+# When the cinder volume is created, deleted, or attached to the
+# glance node to
+# read/write the volume data, the volume's state is changed. For
+# example, the
+# newly created volume status changes from ``creating`` to
+# ``available`` after
+# the creation process is completed. This specifies the maximum time
+# to wait for
+# the status change. If a timeout occurs while waiting, or the status
+# is changed
 # to an unexpected value (e.g. `error``), the image creation fails.
 #
 # Possible values:
@@ -2275,8 +2667,10 @@
 #
 # Allow to perform insecure SSL requests to cinder.
 #
-# If this option is set to True, HTTPS endpoint connection is verified using the
-# CA certificates file specified by ``cinder_ca_certificates_file`` option.
+# If this option is set to True, HTTPS endpoint connection is verified
+# using the
+# CA certificates file specified by ``cinder_ca_certificates_file``
+# option.
 #
 # Possible values:
 #     * True
@@ -2291,15 +2685,23 @@
 #
 # The address where the cinder authentication service is listening.
 #
-# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``,
-# ``cinder_store_project_name``, and ``cinder_store_password`` options are
-# specified, the specified values are always used for the authentication.
-# This is useful to hide the image volumes from users by storing them in a
-# project/tenant specific to the image service. It also enables users to share
-# the image volume among other projects under the control of glance's ACL.
-#
-# If either of these options are not set, the cinder endpoint is looked up
-# from the service catalog, and current context's user and project are used.
+# When all of ``cinder_store_auth_address``,
+# ``cinder_store_user_name``,
+# ``cinder_store_project_name``, and ``cinder_store_password`` options
+# are
+# specified, the specified values are always used for the
+# authentication.
+# This is useful to hide the image volumes from users by storing them
+# in a
+# project/tenant specific to the image service. It also enables users
+# to share
+# the image volume among other projects under the control of glance's
+# ACL.
+#
+# If either of these options are not set, the cinder endpoint is
+# looked up
+# from the service catalog, and current context's user and project are
+# used.
 #
 # Possible values:
 #     * A valid authentication service address, for example:
@@ -2316,7 +2718,8 @@
 #
 # User name to authenticate against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
@@ -2333,11 +2736,13 @@
 #
 # Password for the user authenticating against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
-#     * A valid password for the user specified by ``cinder_store_user_name``
+#     * A valid password for the user specified by
+# ``cinder_store_user_name``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -2350,10 +2755,12 @@
 #
 # Project name where the image volume is stored in cinder.
 #
-# If this configuration option is not set, the project in current context is
+# If this configuration option is not set, the project in current
+# context is
 # used.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the project of the current context is used.
 #
 # Possible values:
@@ -2368,11 +2775,15 @@
 #cinder_store_project_name = <None>
 
 #
-# Path to the rootwrap configuration file to use for running commands as root.
-#
-# The cinder store requires root privileges to operate the image volumes (for
-# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.).
-# The configuration file should allow the required commands by cinder store and
+# Path to the rootwrap configuration file to use for running commands
+# as root.
+#
+# The cinder store requires root privileges to operate the image
+# volumes (for
+# connecting to iSCSI/FC volumes and reading/writing the volume data,
+# etc.).
+# The configuration file should allow the required commands by cinder
+# store and
 # os-brick library.
 #
 # Possible values:
@@ -2387,11 +2798,14 @@
 #
 # Volume type that will be used for volume creation in cinder.
 #
-# Some cinder backends can have several volume types to optimize storage usage.
-# Adding this option allows an operator to choose a specific volume type
+# Some cinder backends can have several volume types to optimize
+# storage usage.
+# Adding this option allows an operator to choose a specific volume
+# type
 # in cinder that can be optimized for images.
 #
-# If this is not set, then the default volume type specified in the cinder
+# If this is not set, then the default volume type specified in the
+# cinder
 # configuration will be used for volume creation.
 #
 # Possible values:
@@ -2428,6 +2842,7 @@
 #
 #  (string value)
 #filesystem_store_datadir = /var/lib/glance/images
+filesystem_store_datadir = /var/lib/glance/images/
 
 #
 # List of directories and their priorities to which the filesystem
@@ -2446,7 +2861,7 @@
 #
 # More information on configuring filesystem store with multiple store
 # directories can be found at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # NOTE: This directory is used only when filesystem store is used as a
 # storage backend. Either ``filesystem_store_datadir`` or
@@ -2487,8 +2902,10 @@
 #
 # File access permissions for the image files.
 #
-# Set the intended file access permissions for image data. This provides
-# a way to enable other services, e.g. Nova, to consume images directly
+# Set the intended file access permissions for image data. This
+# provides
+# a way to enable other services, e.g. Nova, to consume images
+# directly
 # from the filesystem store. The users running the services that are
 # intended to be given access to could be made a member of the group
 # that owns the files created. Assigning a value less then or equal to
@@ -2497,7 +2914,7 @@
 # digit.
 #
 # For more information, please refer the documentation at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # Possible values:
 #     * A valid file access permission
@@ -2514,8 +2931,10 @@
 # Path to the CA bundle file.
 #
 # This configuration option enables the operator to use a custom
-# Certificate Authority file to verify the remote server certificate. If
-# this option is set, the ``https_insecure`` option will be ignored and
+# Certificate Authority file to verify the remote server certificate.
+# If
+# this option is set, the ``https_insecure`` option will be ignored
+# and
 # the CA file specified will be used to authenticate the server
 # certificate and establish a secure connection to the server.
 #
@@ -2533,8 +2952,10 @@
 #
 # This configuration option takes in a boolean value to determine
 # whether or not to verify the remote server certificate. If set to
-# True, the remote server certificate is not verified. If the option is
-# set to False, then the default CA truststore is used for verification.
+# True, the remote server certificate is not verified. If the option
+# is
+# set to False, then the default CA truststore is used for
+# verification.
 #
 # This option is ignored if ``https_ca_certificates_file`` is set.
 # The remote server certificate will then be verified using the file
@@ -2557,12 +2978,14 @@
 # This configuration option specifies the http/https proxy information
 # that should be used to connect to the remote server. The proxy
 # information should be a key value pair of the scheme and proxy, for
-# example, http:10.0.0.1:3128. You can also specify proxies for multiple
+# example, http:10.0.0.1:3128. You can also specify proxies for
+# multiple
 # schemes by separating the key value pairs with a comma, for example,
 # http:10.0.0.1:3128, https:10.0.0.1:1080.
 #
 # Possible values:
-#     * A comma separated list of scheme:proxy pairs as described above
+#     * A comma separated list of scheme:proxy pairs as described
+# above
 #
 # Related options:
 #     * None
@@ -2574,11 +2997,13 @@
 # Size, in megabytes, to chunk RADOS images into.
 #
 # Provide an integer value representing the size in megabytes to chunk
-# Glance images into. The default chunk size is 8 megabytes. For optimal
+# Glance images into. The default chunk size is 8 megabytes. For
+# optimal
 # performance, the value should be a power of two.
 #
 # When Ceph's RBD object storage system is used as the storage backend
-# for storing Glance images, the images are chunked into objects of the
+# for storing Glance images, the images are chunked into objects of
+# the
 # size set using this option. These chunked objects are then stored
 # across the distributed block data store to use for Glance.
 #
@@ -2591,84 +3016,6 @@
 #  (integer value)
 # Minimum value: 1
 #rbd_store_chunk_size = 8
-
-#
-# RADOS pool in which images are stored.
-#
-# When RBD is used as the storage backend for storing Glance images, the
-# images are stored by means of logical grouping of the objects (chunks
-# of images) into a ``pool``. Each pool is defined with the number of
-# placement groups it can contain. The default pool that is used is
-# 'images'.
-#
-# More information on the RBD storage backend can be found here:
-# http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/
-#
-# Possible Values:
-#     * A valid pool name
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#rbd_store_pool = images
-
-#
-# RADOS user to authenticate as.
-#
-# This configuration option takes in the RADOS user to authenticate as.
-# This is only needed when RADOS authentication is enabled and is
-# applicable only if the user is using Cephx authentication. If the
-# value for this option is not set by the user or is set to None, a
-# default value will be chosen, which will be based on the client.
-# section in rbd_store_ceph_conf.
-#
-# Possible Values:
-#     * A valid RADOS user
-#
-# Related options:
-#     * rbd_store_ceph_conf
-#
-#  (string value)
-#rbd_store_user = <None>
-
-#
-# Ceph configuration file path.
-#
-# This configuration option takes in the path to the Ceph configuration
-# file to be used. If the value for this option is not set by the user
-# or is set to None, librados will locate the default configuration file
-# which is located at /etc/ceph/ceph.conf. If using Cephx
-# authentication, this file should include a reference to the right
-# keyring in a client.<USER> section
-#
-# Possible Values:
-#     * A valid path to a configuration file
-#
-# Related options:
-#     * rbd_store_user
-#
-#  (string value)
-#rbd_store_ceph_conf = /etc/ceph/ceph.conf
-
-#
-# Timeout value for connecting to Ceph cluster.
-#
-# This configuration option takes in the timeout value in seconds used
-# when connecting to the Ceph cluster i.e. it sets the time to wait for
-# glance-api before closing the connection. This prevents glance-api
-# hangups during the connection to RBD. If the value for this option
-# is set to less than or equal to 0, no timeout is set and the default
-# librados value is used.
-#
-# Possible Values:
-#     * Any integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-#rados_connect_timeout = 0
 
 #
 # Chunk size for images to be stored in Sheepdog data store.
@@ -2739,7 +3086,7 @@
 # Related Options:
 #     * sheepdog_store_port
 #
-#  (host address value)
+#  (unknown value)
 #sheepdog_store_address = 127.0.0.1
 
 #
@@ -2747,7 +3094,8 @@
 #
 # This boolean determines whether or not to verify the server
 # certificate. If this option is set to True, swiftclient won't check
-# for a valid SSL certificate when authenticating. If the option is set
+# for a valid SSL certificate when authenticating. If the option is
+# set
 # to False, then the default CA truststore is used for verification.
 #
 # Possible values:
@@ -2759,497 +3107,6 @@
 #
 #  (boolean value)
 #swift_store_auth_insecure = false
-
-#
-# Path to the CA bundle file.
-#
-# This configuration option enables the operator to specify the path to
-# a custom Certificate Authority file for SSL verification when
-# connecting to Swift.
-#
-# Possible values:
-#     * A valid path to a CA file
-#
-# Related options:
-#     * swift_store_auth_insecure
-#
-#  (string value)
-#swift_store_cacert = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The region of Swift endpoint to use by Glance.
-#
-# Provide a string value representing a Swift region where Glance
-# can connect to for image storage. By default, there is no region
-# set.
-#
-# When Glance uses Swift as the storage backend to store images
-# for a specific tenant that has multiple endpoints, setting of a
-# Swift region with ``swift_store_region`` allows Glance to connect
-# to Swift in the specified region as opposed to a single region
-# connectivity.
-#
-# This option can be configured for both single-tenant and
-# multi-tenant storage.
-#
-# NOTE: Setting the region with ``swift_store_region`` is
-# tenant-specific and is necessary ``only if`` the tenant has
-# multiple endpoints across different regions.
-#
-# Possible values:
-#     * A string value representing a valid Swift region.
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#swift_store_region = RegionTwo
-
-#
-# The URL endpoint to use for Swift backend storage.
-#
-# Provide a string value representing the URL endpoint to use for
-# storing Glance images in Swift store. By default, an endpoint
-# is not set and the storage URL returned by ``auth`` is used.
-# Setting an endpoint with ``swift_store_endpoint`` overrides the
-# storage URL and is used for Glance image storage.
-#
-# NOTE: The URL should include the path up to, but excluding the
-# container. The location of an object is obtained by appending
-# the container and object to the configured URL.
-#
-# Possible values:
-#     * String value representing a valid URL path up to a Swift container
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name
-
-#
-# Endpoint Type of Swift service.
-#
-# This string value indicates the endpoint type to use to fetch the
-# Swift endpoint. The endpoint type determines the actions the user will
-# be allowed to perform, for instance, reading and writing to the Store.
-# This setting is only used if swift_store_auth_version is greater than
-# 1.
-#
-# Possible values:
-#     * publicURL
-#     * adminURL
-#     * internalURL
-#
-# Related options:
-#     * swift_store_endpoint
-#
-#  (string value)
-# Possible values:
-# publicURL - <No description provided>
-# adminURL - <No description provided>
-# internalURL - <No description provided>
-#swift_store_endpoint_type = publicURL
-
-#
-# Type of Swift service to use.
-#
-# Provide a string value representing the service type to use for
-# storing images while using Swift backend storage. The default
-# service type is set to ``object-store``.
-#
-# NOTE: If ``swift_store_auth_version`` is set to 2, the value for
-# this configuration option needs to be ``object-store``. If using
-# a higher version of Keystone or a different auth scheme, this
-# option may be modified.
-#
-# Possible values:
-#     * A string representing a valid service type for Swift storage.
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#swift_store_service_type = object-store
-
-#
-# Name of single container to store images/name prefix for multiple containers
-#
-# When a single container is being used to store images, this configuration
-# option indicates the container within the Glance account to be used for
-# storing all images. When multiple containers are used to store images, this
-# will be the name prefix for all containers. Usage of single/multiple
-# containers can be controlled using the configuration option
-# ``swift_store_multiple_containers_seed``.
-#
-# When using multiple containers, the containers will be named after the value
-# set for this configuration option with the first N chars of the image UUID
-# as the suffix delimited by an underscore (where N is specified by
-# ``swift_store_multiple_containers_seed``).
-#
-# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
-# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
-# the container ``glance_fda``. All dashes in the UUID are included when
-# creating the container name but do not count toward the character limit, so
-# when N=10 the container name would be ``glance_fdae39a1-ba.``
-#
-# Possible values:
-#     * If using single container, this configuration option can be any string
-#       that is a valid swift container name in Glance's Swift account
-#     * If using multiple containers, this configuration option can be any
-#       string as long as it satisfies the container naming rules enforced by
-#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
-#       taken into account as well.
-#
-# Related options:
-#     * ``swift_store_multiple_containers_seed``
-#     * ``swift_store_multi_tenant``
-#     * ``swift_store_create_container_on_put``
-#
-#  (string value)
-#swift_store_container = glance
-
-#
-# The size threshold, in MB, after which Glance will start segmenting image
-# data.
-#
-# Swift has an upper limit on the size of a single uploaded object. By default,
-# this is 5GB. To upload objects bigger than this limit, objects are segmented
-# into multiple smaller objects that are tied together with a manifest file.
-# For more detail, refer to
-# https://docs.openstack.org/swift/latest/overview_large_objects.html
-#
-# This configuration option specifies the size threshold over which the Swift
-# driver will start segmenting image data into multiple smaller files.
-# Currently, the Swift driver only supports creating Dynamic Large Objects.
-#
-# NOTE: This should be set by taking into account the large object limit
-# enforced by the Swift cluster in consideration.
-#
-# Possible values:
-#     * A positive integer that is less than or equal to the large object limit
-#       enforced by the Swift cluster in consideration.
-#
-# Related options:
-#     * ``swift_store_large_object_chunk_size``
-#
-#  (integer value)
-# Minimum value: 1
-#swift_store_large_object_size = 5120
-
-#
-# The maximum size, in MB, of the segments when image data is segmented.
-#
-# When image data is segmented to upload images that are larger than the limit
-# enforced by the Swift cluster, image data is broken into segments that are no
-# bigger than the size specified by this configuration option.
-# Refer to ``swift_store_large_object_size`` for more detail.
-#
-# For example: if ``swift_store_large_object_size`` is 5GB and
-# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
-# segmented into 7 segments where the first six segments will be 1GB in size and
-# the seventh segment will be 0.2GB.
-#
-# Possible values:
-#     * A positive integer that is less than or equal to the large object limit
-#       enforced by Swift cluster in consideration.
-#
-# Related options:
-#     * ``swift_store_large_object_size``
-#
-#  (integer value)
-# Minimum value: 1
-#swift_store_large_object_chunk_size = 200
-
-#
-# Create container, if it doesn't already exist, when uploading image.
-#
-# At the time of uploading an image, if the corresponding container doesn't
-# exist, it will be created provided this configuration option is set to True.
-# By default, it won't be created. This behavior is applicable for both single
-# and multiple containers mode.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * None
-#
-#  (boolean value)
-#swift_store_create_container_on_put = false
-
-#
-# Store images in tenant's Swift account.
-#
-# This enables multi-tenant storage mode which causes Glance images to be stored
-# in tenant specific Swift accounts. If this is disabled, Glance stores all
-# images in its own account. More details multi-tenant store can be found at
-# https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
-#
-# NOTE: If using multi-tenant swift store, please make sure
-# that you do not set a swift configuration file with the
-# 'swift_store_config_file' option.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_config_file
-#
-#  (boolean value)
-#swift_store_multi_tenant = false
-
-#
-# Seed indicating the number of containers to use for storing images.
-#
-# When using a single-tenant store, images can be stored in one or more than one
-# containers. When set to 0, all images will be stored in one single container.
-# When set to an integer value between 1 and 32, multiple containers will be
-# used to store images. This configuration option will determine how many
-# containers are created. The total number of containers that will be used is
-# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
-# will be used to store images.
-#
-# Please refer to ``swift_store_container`` for more detail on the naming
-# convention. More detail about using multiple containers can be found at
-# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
-# multiple-containers.html
-#
-# NOTE: This is used only when swift_store_multi_tenant is disabled.
-#
-# Possible values:
-#     * A non-negative integer less than or equal to 32
-#
-# Related options:
-#     * ``swift_store_container``
-#     * ``swift_store_multi_tenant``
-#     * ``swift_store_create_container_on_put``
-#
-#  (integer value)
-# Minimum value: 0
-# Maximum value: 32
-#swift_store_multiple_containers_seed = 0
-
-#
-# List of tenants that will be granted admin access.
-#
-# This is a list of tenants that will be granted read/write access on
-# all Swift containers created by Glance in multi-tenant mode. The
-# default value is an empty list.
-#
-# Possible values:
-#     * A comma separated list of strings representing UUIDs of Keystone
-#       projects/tenants
-#
-# Related options:
-#     * None
-#
-#  (list value)
-#swift_store_admin_tenants =
-
-#
-# SSL layer compression for HTTPS Swift requests.
-#
-# Provide a boolean value to determine whether or not to compress
-# HTTPS Swift requests for images at the SSL layer. By default,
-# compression is enabled.
-#
-# When using Swift as the backend store for Glance image storage,
-# SSL layer compression of HTTPS Swift requests can be set using
-# this option. If set to False, SSL layer compression of HTTPS
-# Swift requests is disabled. Disabling this option may improve
-# performance for images which are already in a compressed format,
-# for example, qcow2.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related Options:
-#     * None
-#
-#  (boolean value)
-#swift_store_ssl_compression = true
-
-#
-# The number of times a Swift download will be retried before the
-# request fails.
-#
-# Provide an integer value representing the number of times an image
-# download must be retried before erroring out. The default value is
-# zero (no retry on a failed image download). When set to a positive
-# integer value, ``swift_store_retry_get_count`` ensures that the
-# download is attempted this many more times upon a download failure
-# before sending an error message.
-#
-# Possible values:
-#     * Zero
-#     * Positive integer value
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#swift_store_retry_get_count = 0
-
-#
-# Time in seconds defining the size of the window in which a new
-# token may be requested before the current token is due to expire.
-#
-# Typically, the Swift storage driver fetches a new token upon the
-# expiration of the current token to ensure continued access to
-# Swift. However, some Swift transactions (like uploading image
-# segments) may not recover well if the token expires on the fly.
-#
-# Hence, by fetching a new token before the current token expiration,
-# we make sure that the token does not expire or is close to expiry
-# before a transaction is attempted. By default, the Swift storage
-# driver requests for a new token 60 seconds or less before the
-# current token expiration.
-#
-# Possible values:
-#     * Zero
-#     * Positive integer value
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#swift_store_expire_soon_interval = 60
-
-#
-# Use trusts for multi-tenant Swift store.
-#
-# This option instructs the Swift store to create a trust for each
-# add/get request when the multi-tenant store is in use. Using trusts
-# allows the Swift store to avoid problems that can be caused by an
-# authentication token expiring during the upload or download of data.
-#
-# By default, ``swift_store_use_trusts`` is set to ``True``(use of
-# trusts is enabled). If set to ``False``, a user token is used for
-# the Swift connection instead, eliminating the overhead of trust
-# creation.
-#
-# NOTE: This option is considered only when
-# ``swift_store_multi_tenant`` is set to ``True``
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_multi_tenant
-#
-#  (boolean value)
-#swift_store_use_trusts = true
-
-#
-# Buffer image segments before upload to Swift.
-#
-# Provide a boolean value to indicate whether or not Glance should
-# buffer image data to disk while uploading to swift. This enables
-# Glance to resume uploads on error.
-#
-# NOTES:
-# When enabling this option, one should take great care as this
-# increases disk usage on the API node. Be aware that depending
-# upon how the file system is configured, the disk space used
-# for buffering may decrease the actual disk space available for
-# the glance image cache.  Disk utilization will cap according to
-# the following equation:
-# (``swift_store_large_object_chunk_size`` * ``workers`` * 1000)
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_upload_buffer_dir
-#
-#  (boolean value)
-#swift_buffer_on_upload = false
-
-#
-# Reference to default Swift account/backing store parameters.
-#
-# Provide a string value representing a reference to the default set
-# of parameters required for using swift account/backing store for
-# image storage. The default reference value for this configuration
-# option is 'ref1'. This configuration option dereferences the
-# parameters and facilitates image storage in Swift storage backend
-# every time a new image is added.
-#
-# Possible values:
-#     * A valid string value
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#default_swift_reference = ref1
-
-# DEPRECATED: Version of the authentication service to use. Valid versions are 2
-# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'auth_version' in the Swift back-end configuration file is
-# used instead.
-#swift_store_auth_version = 2
-
-# DEPRECATED: The address where the Swift authentication service is listening.
-# (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'auth_address' in the Swift back-end configuration file is
-# used instead.
-#swift_store_auth_address = <None>
-
-# DEPRECATED: The user to authenticate against the Swift authentication service.
-# (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'user' in the Swift back-end configuration file is set instead.
-#swift_store_user = <None>
-
-# DEPRECATED: Auth key for the user authenticating against the Swift
-# authentication service. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'key' in the Swift back-end configuration file is used
-# to set the authentication key instead.
-#swift_store_key = <None>
-
-#
-# Absolute path to the file containing the swift account(s)
-# configurations.
-#
-# Include a string value representing the path to a configuration
-# file that has references for each of the configured Swift
-# account(s)/backing stores. By default, no file path is specified
-# and customized Swift referencing is disabled. Configuring this
-# option is highly recommended while using Swift storage backend for
-# image storage as it avoids storage of credentials in the database.
-#
-# NOTE: Please do not configure this option if you have set
-# ``swift_store_multi_tenant`` to ``True``.
-#
-# Possible values:
-#     * String value representing an absolute path on the glance-api
-#       node
-#
-# Related options:
-#     * swift_store_multi_tenant
-#
-#  (string value)
-#swift_store_config_file = <None>
 
 #
 # Directory to buffer image segments before upload to Swift.
@@ -3276,215 +3133,699 @@
 #  (string value)
 #swift_upload_buffer_dir = <None>
 
-#
-# Address of the ESX/ESXi or vCenter Server target system.
-#
-# This configuration option sets the address of the ESX/ESXi or vCenter
-# Server target system. This option is required when using the VMware
-# storage backend. The address can contain an IP address (127.0.0.1) or
-# a DNS name (www.my-domain.com).
-#
-# Possible Values:
-#     * A valid IPv4 or IPv6 address
-#     * A valid DNS name
-#
-# Related options:
-#     * vmware_server_username
-#     * vmware_server_password
-#
-#  (host address value)
-#vmware_server_host = 127.0.0.1
-
-#
-# Server username.
-#
-# This configuration option takes the username for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is the username for a user with appropriate
-#       privileges
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_password
-#
-#  (string value)
-#vmware_server_username = root
-
-#
-# Server password.
-#
-# This configuration option takes the password for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is a password corresponding to the username
-#       specified using the "vmware_server_username" option
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_username
-#
-#  (string value)
-#vmware_server_password = vmware
-
-#
-# The number of VMware API retries.
-#
-# This configuration option specifies the number of times the VMware
-# ESX/VC server API must be retried upon connection related issues or
-# server API call overload. It is not possible to specify 'retry
-# forever'.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
+[oslo_concurrency]
+
+[matchmaker_redis]
+
+[oslo_messaging_amqp]
+#
+# From oslo.messaging
+#
+
+# Name for the AMQP container. must be globally unique. Defaults to a
+# generated UUID (string value)
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+#trace = false
+
+# Attempt to connect via SSL. If no other ssl-related parameters are
+# given, it will use the system's CA-bundle to verify the server's
+# certificate. (boolean value)
+#ssl = false
+
+# CA certificate PEM file used to verify the server's certificate
+# (string value)
+#ssl_ca_file =
+
+# Self-identifying certificate PEM file for client authentication
+# (string value)
+#ssl_cert_file =
+
+# Private key PEM file used to sign ssl_cert_file certificate
+# (optional) (string value)
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+#ssl_key_password = <None>
+
+# By default SSL checks that the name in the server's certificate
+# matches the hostname in the transport_url. In some configurations it
+# may be preferable to use the virtual hostname instead, for example
+# if the server uses the Server Name Indication TLS extension
+# (rfc6066) to provide a certificate per virtual host. Set
+# ssl_verify_vhost to True if the server's SSL certificate uses the
+# virtual host name instead of the DNS name. (boolean value)
+#ssl_verify_vhost = false
+
+# DEPRECATED: Accept clients using either SSL or plain TCP (boolean
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Not applicable - not a SSL server
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string
+# value)
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+#sasl_config_name =
+
+# SASL realm to use if no realm present in username (string value)
+#sasl_default_realm =
+
+# DEPRECATED: User name for message broker authentication (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the
+# username.
+#username =
+
+# DEPRECATED: Password for message broker authentication (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the
+# password.
+#password =
+
+# Seconds to pause before attempting to re-connect. (integer value)
 # Minimum value: 1
-#vmware_api_retry_count = 10
-
-#
-# Interval in seconds used for polling remote tasks invoked on VMware
-# ESX/VC server.
-#
-# This configuration option takes in the sleep time in seconds for polling an
-# on-going async task as part of the VMWare ESX/VC server API call.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
+#connection_retry_interval = 1
+
+# Increase the connection_retry_interval by this many seconds after
+# each unsuccessful failover attempt. (integer value)
+# Minimum value: 0
+#connection_retry_backoff = 2
+
+# Maximum limit for connection_retry_interval +
+# connection_retry_backoff (integer value)
 # Minimum value: 1
-#vmware_task_poll_interval = 5
-
-#
-# The directory where the glance images will be stored in the datastore.
-#
-# This configuration option specifies the path to the directory where the
-# glance images will be stored in the VMware datastore. If this option
-# is not set,  the default directory where the glance images are stored
-# is openstack_glance.
-#
-# Possible Values:
-#     * Any string that is a valid path to a directory
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#vmware_store_image_dir = /openstack_glance
-
-#
-# Set verification of the ESX/vCenter server certificate.
-#
-# This configuration option takes a boolean value to determine
-# whether or not to verify the ESX/vCenter server certificate. If this
-# option is set to True, the ESX/vCenter server certificate is not
-# verified. If this option is set to False, then the default CA
-# truststore is used for verification.
-#
-# This option is ignored if the "vmware_ca_file" option is set. In that
-# case, the ESX/vCenter server certificate will then be verified using
-# the file specified using the "vmware_ca_file" option .
-#
-# Possible Values:
-#     * True
-#     * False
-#
-# Related options:
-#     * vmware_ca_file
-#
-#  (boolean value)
-# Deprecated group/name - [glance_store]/vmware_api_insecure
-#vmware_insecure = false
-
-#
-# Absolute path to the CA bundle file.
-#
-# This configuration option enables the operator to use a custom
-# Cerificate Authority File to verify the ESX/vCenter certificate.
-#
-# If this option is set, the "vmware_insecure" option will be ignored
-# and the CA file specified will be used to authenticate the ESX/vCenter
-# server certificate and establish a secure connection to the server.
-#
-# Possible Values:
-#     * Any string that is a valid absolute path to a CA file
-#
-# Related options:
-#     * vmware_insecure
-#
-#  (string value)
-#vmware_ca_file = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The datastores where the image can be stored.
-#
-# This configuration option specifies the datastores where the image can
-# be stored in the VMWare store backend. This option may be specified
-# multiple times for specifying multiple datastores. The datastore name
-# should be specified after its datacenter path, separated by ":". An
-# optional weight may be given after the datastore name, separated again
-# by ":" to specify the priority. Thus, the required format becomes
-# <datacenter_path>:<datastore_name>:<optional_weight>.
-#
-# When adding an image, the datastore with highest weight will be
-# selected, unless there is not enough free space available in cases
-# where the image size is already known. If no weight is given, it is
-# assumed to be zero and the directory will be considered for selection
-# last. If multiple datastores have the same weight, then the one with
-# the most free space available is selected.
-#
-# Possible Values:
-#     * Any string of the format:
-#       <datacenter_path>:<datastore_name>:<optional_weight>
-#
-# Related options:
-#    * None
-#
+#connection_retry_interval_max = 30
+
+# Time to pause between re-connecting an AMQP 1.0 link that failed due
+# to a recoverable error. (integer value)
+# Minimum value: 1
+#link_retry_delay = 10
+
+# The maximum number of attempts to re-send a reply message which
+# failed due to a recoverable error. (integer value)
+# Minimum value: -1
+#default_reply_retry = 0
+
+# The deadline for an rpc reply message delivery. (integer value)
+# Minimum value: 5
+#default_reply_timeout = 30
+
+# The deadline for an rpc cast or call message delivery. Only used
+# when caller does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_send_timeout = 30
+
+# The deadline for a sent notification message delivery. Only used
+# when caller does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_notify_timeout = 30
+
+# The duration to schedule a purge of idle sender links. Detach link
+# after expiry. (integer value)
+# Minimum value: 1
+#default_sender_link_timeout = 600
+
+# Indicates the addressing mode used by the driver.
+# Permitted values:
+# 'legacy'   - use legacy non-routable addressing
+# 'routable' - use routable addresses
+# 'dynamic'  - use legacy addresses if the message bus does not
+# support routing otherwise use routable addressing (string value)
+#addressing_mode = dynamic
+
+# Enable virtual host support for those message buses that do not
+# natively support virtual hosting (such as qpidd). When set to true
+# the virtual host name will be added to all message bus addresses,
+# effectively creating a private 'subnet' per virtual host. Set to
+# False if the message bus supports virtual hosting using the
+# 'hostname' field in the AMQP 1.0 Open performative as the name of
+# the virtual host. (boolean value)
+#pseudo_vhost = true
+
+# address prefix used when sending to a specific server (string value)
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+#group_request_prefix = unicast
+
+# Address prefix for all generated RPC addresses (string value)
+#rpc_address_prefix = openstack.org/om/rpc
+
+# Address prefix for all generated Notification addresses (string
+# value)
+#notify_address_prefix = openstack.org/om/notify
+
+# Appended to the address prefix when sending a fanout message. Used
+# by the message bus to identify fanout messages. (string value)
+#multicast_address = multicast
+
+# Appended to the address prefix when sending to a particular
+# RPC/Notification server. Used by the message bus to identify
+# messages sent to a single destination. (string value)
+#unicast_address = unicast
+
+# Appended to the address prefix when sending to a group of consumers.
+# Used by the message bus to identify messages that should be
+# delivered in a round-robin fashion across consumers. (string value)
+#anycast_address = anycast
+
+# Exchange name used in notification addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_notification_exchange if set
+# else control_exchange if set
+# else 'notify' (string value)
+#default_notification_exchange = <None>
+default_notification_exchange = glance
+
+# Exchange name used in RPC addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_rpc_exchange if set
+# else control_exchange if set
+# else 'rpc' (string value)
+#default_rpc_exchange = <None>
+
+# Window size for incoming RPC Reply messages. (integer value)
+# Minimum value: 1
+#reply_link_credit = 200
+
+# Window size for incoming RPC Request messages (integer value)
+# Minimum value: 1
+#rpc_server_credit = 100
+
+# Window size for incoming Notification messages (integer value)
+# Minimum value: 1
+#notify_server_credit = 100
+
+# Send messages of this type pre-settled.
+# Pre-settled messages will not receive acknowledgement
+# from the peer. Note well: pre-settled messages may be
+# silently discarded if the delivery fails.
+# Permitted values:
+# 'rpc-call' - send RPC Calls pre-settled
+# 'rpc-reply'- send RPC Replies pre-settled
+# 'rpc-cast' - Send RPC Casts pre-settled
+# 'notify'   - Send Notifications pre-settled
 #  (multi valued)
-#vmware_datastores =
-
-
-[image_format]
-
-#
-# From glance.api
-#
-
-# Supported values for the 'container_format' image attribute (list value)
-# Deprecated group/name - [DEFAULT]/container_formats
-#container_formats = ami,ari,aki,bare,ovf,ova,docker
-
-# Supported values for the 'disk_format' image attribute (list value)
-# Deprecated group/name - [DEFAULT]/disk_formats
-#disk_formats = ami,ari,aki,vhd,vhdx,vmdk,raw,qcow2,vdi,iso,ploop
-
+#pre_settled = rpc-cast
+#pre_settled = rpc-reply
+
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+[database]
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = mysql+pymysql://glance:opnfv_secret@172.16.10.36/glance?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 280
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
+#db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/glance/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
 
 # Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users. Unauthenticated
-# clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://172.16.10.36:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -3497,9 +3838,10 @@
 # release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and
-# will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://172.16.10.36:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -3512,8 +3854,8 @@
 # value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with Identity API
-# Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
@@ -3537,10 +3879,11 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P release.
-# (string value)
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
@@ -3551,42 +3894,12 @@
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
 
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set to
-# -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in the
-# Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
-
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every memcached server.
-# (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
 # (Optional) Socket timeout in seconds for communicating with a memcached
@@ -3612,11 +3925,11 @@
 
 # Used to control the use and type of token binding. Can be set to: "disabled"
 # to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it if
-# not. "strict" like "permissive" but if the bind type is unknown the token will
-# be rejected. "required" any form of token binding is needed to be allowed.
-# Finally the name of a binding method that must be present in tokens. (string
-# value)
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
 #enforce_token_bind = permissive
 
 # DEPRECATED: If true, the revocation list will be checked for cached tokens.
@@ -3643,1106 +3956,210 @@
 # A choice of roles that must be present in a service token. Service tokens are
 # allowed to request that an expired token can be used and so this check should
 # tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present. For
-# backwards compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens pass that
-# don't pass the service_token_roles check as valid. Setting this true will
-# become the default in a future release and should be enabled if possible.
-# (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = glance
+
+[cors]
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain
+# received in the requests "origin" header. Format:
+# "<protocol>://<host>[:<port>]", no trailing slash. Example:
+# https://horizon.example.com (list value)
+allowed_origin = https://10.16.0.107
+
+# Indicate that the actual request can include user credentials
+# (boolean value)
+
+# Indicate which headers are safe to expose to the API. Defaults to
+# HTTP Simple Headers. (list value)
+
+# Maximum cache age of CORS preflight requests. (integer value)
+
+# Indicate which methods can be used during the actual request. (list
+# value)
+
+# Indicate which header field names may be used during the actual
+# request. (list value)
+
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory should
-# only be writable by the user running the processes that need locking. Defaults
-# to environment variable OSLO_LOCK_PATH. If external locks are used, a lock
-# path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
-# value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+[barbican]
+#
+# From castellan.config
+#
+
+# Use this endpoint to connect to Barbican, for example:
+# "http://localhost:9311/" (string value)
+#barbican_endpoint = <None>
+barbican_endpoint = http://172.16.10.36:9311
+
+# Version of the Barbican API, for example: "v1" (string value)
+#barbican_api_version = <None>
+
+# Use this endpoint to connect to Keystone (string value)
+# Deprecated group/name - [key_manager]/auth_url
+#auth_endpoint = http://localhost/identity/v3
+auth_endpoint = http://172.16.10.36:35357/v3
+
+# Number of seconds to wait before retrying poll for key creation completion
 # (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-robin
-# fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point
-# value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are messaging,
-# messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than one
-# RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue. If
-# you just want to make sure that all queues (except those with auto-generated
-# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
-# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically deleted.
-# The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows unlimited
-# messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the heartbeat.
-# (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[paste_deploy]
-
-#
-# From glance.api
-#
-
-#
-# Deployment flavor to use in the server application pipeline.
-#
-# Provide a string value representing the appropriate deployment
-# flavor used in the server application pipleline. This is typically
-# the partial name of a pipeline in the paste configuration file with
-# the service name removed.
-#
-# For example, if your paste section name in the paste configuration
-# file is [pipeline:glance-api-keystone], set ``flavor`` to
-# ``keystone``.
-#
-# Possible values:
-#     * String value representing a partial pipeline name.
-#
-# Related Options:
-#     * config_file
-#
-#  (string value)
-#flavor = keystone
-
-#
-# Name of the paste configuration file.
-#
-# Provide a string value representing the name of the paste
-# configuration file to use for configuring piplelines for
-# server application deployments.
-#
-# NOTES:
-#     * Provide the name or the path relative to the glance directory
-#       for the paste configuration file and not the absolute path.
-#     * The sample paste configuration file shipped with Glance need
-#       not be edited in most cases as it comes with ready-made
-#       pipelines for all common deployment flavors.
-#
-# If no value is specified for this option, the ``paste.ini`` file
-# with the prefix of the corresponding Glance service's configuration
-# file name will be searched for in the known configuration
-# directories. (For example, if this option is missing from or has no
-# value set in ``glance-api.conf``, the service will look for a file
-# named ``glance-api-paste.ini``.) If the paste configuration file is
-# not found, the service will not start.
-#
-# Possible values:
-#     * A string value representing the name of the paste configuration
-#       file.
-#
-# Related Options:
-#     * flavor
-#
-#  (string value)
-#config_file = glance-api-paste.ini
-
-
-[profiler]
-
-#
-# From glance.api
-#
-
-#
-# Enable the profiling for all services on this node.
-#
-# Default value is False (fully disable the profiling feature).
-#
-# Possible values:
-#
-# * True: Enables the feature
-# * False: Disables the feature. The profiling cannot be started via this
-# project
-#   operations. If the profiling is triggered by another project, this project
-#   part will be empty.
-#  (boolean value)
-# Deprecated group/name - [profiler]/profiler_enabled
-#enabled = false
-
-#
-# Enable SQL requests profiling in services.
-#
-# Default value is False (SQL requests won't be traced).
-#
-# Possible values:
-#
-# * True: Enables SQL requests profiling. Each SQL query will be part of the
-#   trace and can the be analyzed by how much time was spent for that.
-# * False: Disables SQL requests profiling. The spent time is only shown on a
-#   higher level of operations. Single SQL queries cannot be analyzed this way.
-#  (boolean value)
-#trace_sqlalchemy = false
-
-#
-# Secret key(s) to use for encrypting context data for performance profiling.
-#
-# This string value should have the following format: <key1>[,<key2>,...<keyn>],
-# where each key is some random string. A user who triggers the profiling via
-# the REST API has to set one of these keys in the headers of the REST API call
-# to include profiling results of this node for this particular project.
-#
-# Both "enabled" flag and "hmac_keys" config options should be set to enable
-# profiling. Also, to generate correct profiling information across all services
-# at least one key needs to be consistent between OpenStack projects. This
-# ensures it can be used from client side to generate the trace, containing
-# information from all possible resources.
-#  (string value)
-#hmac_keys = SECRET_KEY
-
-#
-# Connection string for a notifier backend.
-#
-# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
-#
-# Examples of possible values:
-#
-# * ``messaging://`` - use oslo_messaging driver for sending spans.
-# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
-# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
-# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
-#   spans.
-# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
-# spans.
-#  (string value)
-#connection_string = messaging://
-
-#
-# Document type for notification indexing in elasticsearch.
-#  (string value)
-#es_doc_type = notification
-
-#
-# This parameter is a time value parameter (for example: es_scroll_time=2m),
-# indicating for how long the nodes that participate in the search will maintain
-# relevant resources in order to continue and support it.
-#  (string value)
-#es_scroll_time = 2m
-
-#
-# Elasticsearch splits large requests in batches. This parameter defines
-# maximum size of each batch (for example: es_scroll_size=10000).
-#  (integer value)
-#es_scroll_size = 10000
-
-#
-# Redissentinel provides a timeout option on the connections.
-# This parameter defines that timeout (for example: socket_timeout=0.1).
-#  (floating point value)
-#socket_timeout = 0.1
-
-#
-# Redissentinel uses a service name to identify a master redis service.
-# This parameter defines the name (for example:
-# ``sentinal_service_name=mymaster``).
-#  (string value)
-#sentinel_service_name = mymaster
-
-#
-# Enable filter traces that contain error/exception to a separated place.
-#
-# Default value is set to False.
-#
-# Possible values:
-#
-# * True: Enable filter traces that contain error/exception.
-# * False: Disable the filter.
-#  (boolean value)
-#filter_error_trace = false
-
-
-[store_type_location_strategy]
-
-#
-# From glance.api
-#
-
-#
-# Preference order of storage backends.
-#
-# Provide a comma separated list of store names in the order in
-# which images should be retrieved from storage backends.
-# These store names must be registered with the ``stores``
-# configuration option.
-#
-# NOTE: The ``store_type_preference`` configuration option is applied
-# only if ``store_type`` is chosen as a value for the
-# ``location_strategy`` configuration option. An empty list will not
-# change the location order.
-#
-# Possible values:
-#     * Empty list
-#     * Comma separated list of registered store names. Legal values are:
-#         * file
-#         * http
-#         * rbd
-#         * swift
-#         * sheepdog
-#         * cinder
-#         * vmware
-#
-# Related options:
-#     * location_strategy
-#     * stores
-#
-#  (list value)
-#store_type_preference =
-
-
-[task]
-
-#
-# From glance.api
-#
-
-# Time in hours for which a task lives after, either succeeding or failing
-# (integer value)
-# Deprecated group/name - [DEFAULT]/task_time_to_live
-#task_time_to_live = 48
-
-#
-# Task executor to be used to run task scripts.
-#
-# Provide a string value representing the executor to use for task
-# executions. By default, ``TaskFlow`` executor is used.
-#
-# ``TaskFlow`` helps make task executions easy, consistent, scalable
-# and reliable. It also enables creation of lightweight task objects
-# and/or functions that are combined together into flows in a
-# declarative manner.
-#
-# Possible values:
-#     * taskflow
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#task_executor = taskflow
-
-#
-# Absolute path to the work directory to use for asynchronous
-# task operations.
-#
-# The directory set here will be used to operate over images -
-# normally before they are imported in the destination store.
-#
-# NOTE: When providing a value for ``work_dir``, please make sure
-# that enough space is provided for concurrent tasks to run
-# efficiently without running out of space.
-#
-# A rough estimation can be done by multiplying the number of
-# ``max_workers`` with an average image size (e.g 500MB). The image
-# size estimation should be done based on the average size in your
-# deployment. Note that depending on the tasks running you may need
-# to multiply this number by some factor depending on what the task
-# does. For example, you may want to double the available size if
-# image conversion is enabled. All this being said, remember these
-# are just estimations and you should do them based on the worst
-# case scenario and be prepared to act in case they were wrong.
-#
-# Possible values:
-#     * String value representing the absolute path to the working
-#       directory
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#work_dir = /work_dir
-
-
-[taskflow_executor]
-
-#
-# From glance.api
-#
-
-#
-# Set the taskflow engine mode.
-#
-# Provide a string type value to set the mode in which the taskflow
-# engine would schedule tasks to the workers on the hosts. Based on
-# this mode, the engine executes tasks either in single or multiple
-# threads. The possible values for this configuration option are:
-# ``serial`` and ``parallel``. When set to ``serial``, the engine runs
-# all the tasks in a single thread which results in serial execution
-# of tasks. Setting this to ``parallel`` makes the engine run tasks in
-# multiple threads. This results in parallel execution of tasks.
-#
-# Possible values:
-#     * serial
-#     * parallel
-#
-# Related options:
-#     * max_workers
-#
-#  (string value)
-# Possible values:
-# serial - <No description provided>
-# parallel - <No description provided>
-#engine_mode = parallel
-
-#
-# Set the number of engine executable tasks.
-#
-# Provide an integer value to limit the number of workers that can be
-# instantiated on the hosts. In other words, this number defines the
-# number of parallel tasks that can be executed at the same time by
-# the taskflow engine. This value can be greater than one when the
-# engine mode is set to parallel.
-#
-# Possible values:
-#     * Integer value greater than or equal to 1
-#
-# Related options:
-#     * engine_mode
-#
-#  (integer value)
-# Minimum value: 1
-# Deprecated group/name - [task]/eventlet_executor_pool_size
-#max_workers = 10
-
-#
-# Set the desired image conversion format.
-#
-# Provide a valid image format to which you want images to be
-# converted before they are stored for consumption by Glance.
-# Appropriate image format conversions are desirable for specific
-# storage backends in order to facilitate efficient handling of
-# bandwidth and usage of the storage infrastructure.
-#
-# By default, ``conversion_format`` is not set and must be set
-# explicitly in the configuration file.
-#
-# The allowed values for this option are ``raw``, ``qcow2`` and
-# ``vmdk``. The  ``raw`` format is the unstructured disk format and
-# should be chosen when RBD or Ceph storage backends are used for
-# image storage. ``qcow2`` is supported by the QEMU emulator that
-# expands dynamically and supports Copy on Write. The ``vmdk`` is
-# another common disk format supported by many common virtual machine
-# monitors like VMWare Workstation.
-#
-# Possible values:
-#     * qcow2
-#     * raw
-#     * vmdk
-#
-# Related options:
-#     * disk_formats
-#
-#  (string value)
-# Possible values:
-# qcow2 - <No description provided>
-# raw - <No description provided>
-# vmdk - <No description provided>
-#conversion_format = raw
+#retry_delay = 1
+
+# Number of times to retry poll for key creation completion (integer value)
+#number_of_retries = 60
+
+# Specifies if insecure TLS (https) requests. If False, the server's
+# certificate will not be validated (boolean value)
+#verify_ssl = true
+
+# Specifies the type of endpoint.  Allowed values are: public, internal, and
+# admin (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+#barbican_endpoint_type = public
+barbican_endpoint_type = internal

2019-11-21 06:32:33,476 [salt.state       :1951][INFO    ][26952] Completed state [/etc/glance/glance-api.conf] at time 06:32:33.475981 duration_in_ms=494.489
2019-11-21 06:32:33,476 [salt.state       :1780][INFO    ][26952] Running state [/etc/glance/glance-api-paste.ini] at time 06:32:33.476762
2019-11-21 06:32:33,477 [salt.state       :1813][INFO    ][26952] Executing state file.managed for [/etc/glance/glance-api-paste.ini]
2019-11-21 06:32:33,494 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'glance/files/rocky/glance-api-paste.ini'
2019-11-21 06:32:33,541 [salt.state       :300 ][INFO    ][26952] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 # Use this pipeline for no auth or image caching - DEFAULT
 [pipeline:glance-api]
 pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler unauthenticated-context rootapp
@@ -12,7 +13,7 @@
 
 # Use this pipeline for keystone auth
 [pipeline:glance-api-keystone]
-pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler authtoken context  rootapp
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler authtoken context rootapp
 
 # Use this pipeline for keystone auth with image caching
 [pipeline:glance-api-keystone+caching]

2019-11-21 06:32:33,542 [salt.state       :1951][INFO    ][26952] Completed state [/etc/glance/glance-api-paste.ini] at time 06:32:33.542050 duration_in_ms=65.287
2019-11-21 06:32:33,543 [salt.state       :1780][INFO    ][26952] Running state [glance-manage db_sync] at time 06:32:33.543667
2019-11-21 06:32:33,543 [salt.state       :1813][INFO    ][26952] Executing state cmd.run for [glance-manage db_sync]
2019-11-21 06:32:33,544 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command 'glance-manage db_sync' in directory '/root'
2019-11-21 06:32:37,218 [salt.state       :300 ][INFO    ][26952] {'pid': 28467, 'retcode': 0, 'stderr': "/usr/lib/python2.7/dist-packages/oslo_db/sqlalchemy/enginefacade.py:1352: OsloDBDeprecationWarning: EngineFacade is deprecated; please use oslo_db.sqlalchemy.enginefacade\n  expire_on_commit=expire_on_commit, _conf=conf)\n2019-11-21 06:32:35.544 28468 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\x1b[00m\n2019-11-21 06:32:35.545 28468 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.\x1b[00m\n2019-11-21 06:32:35.555 28468 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\x1b[00m\n2019-11-21 06:32:35.556 28468 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.\x1b[00m\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> liberty, liberty initial\nINFO  [alembic.runtime.migration] Running upgrade liberty -> mitaka01, add index on created_at and updated_at columns of 'images' table\nINFO  [alembic.runtime.migration] Running upgrade mitaka01 -> mitaka02, update metadef os_nova_server\nINFO  [alembic.runtime.migration] Running upgrade mitaka02 -> ocata_expand01, add visibility to images\nINFO  [alembic.runtime.migration] Running upgrade ocata_expand01 -> pike_expand01, empty expand for symmetry with pike_contract01\nINFO  [alembic.runtime.migration] Running upgrade pike_expand01 -> queens_expand01\nINFO  [alembic.runtime.migration] Running upgrade queens_expand01 -> rocky_expand01, add os_hidden column to images table\nINFO  [alembic.runtime.migration] Running upgrade rocky_expand01 -> rocky_expand02, add os_hash_algo and os_hash_value columns to images table\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade mitaka02 -> ocata_contract01, remove is_public from images\nINFO  [alembic.runtime.migration] Running upgrade ocata_contract01 -> pike_contract01, drop glare artifacts tables\nINFO  [alembic.runtime.migration] Running upgrade pike_contract01 -> queens_contract01\nINFO  [alembic.runtime.migration] Running upgrade queens_contract01 -> rocky_contract01\nINFO  [alembic.runtime.migration] Running upgrade rocky_contract01 -> rocky_contract02\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.", 'stdout': 'Upgraded database to: rocky_expand02, current revision(s): rocky_expand02\nDatabase migration is up to date. No migration needed.\nUpgraded database to: rocky_contract02, current revision(s): rocky_contract02\nDatabase is synced successfully.'}
2019-11-21 06:32:37,219 [salt.state       :1951][INFO    ][26952] Completed state [glance-manage db_sync] at time 06:32:37.218972 duration_in_ms=3675.305
2019-11-21 06:32:37,221 [salt.state       :1780][INFO    ][26952] Running state [glance-manage db_load_metadefs] at time 06:32:37.221359
2019-11-21 06:32:37,221 [salt.state       :1813][INFO    ][26952] Executing state cmd.run for [glance-manage db_load_metadefs]
2019-11-21 06:32:37,222 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command 'glance-manage db_load_metadefs' in directory '/root'
2019-11-21 06:32:40,615 [salt.state       :300 ][INFO    ][26952] {'pid': 28476, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/oslo_db/sqlalchemy/enginefacade.py:1352: OsloDBDeprecationWarning: EngineFacade is deprecated; please use oslo_db.sqlalchemy.enginefacade\n  expire_on_commit=expire_on_commit, _conf=conf)\n2019-11-21 06:32:39.288 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/storage-volume-type.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.353 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vcputopology.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.418 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-processor-allocation-setting-data.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.516 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-virtual-system-setting-data.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.555 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/software-webservers.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.576 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vmware-quota-flavor.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.601 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-quota.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.619 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-aggr-num-instances.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.636 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-aggr-disk-filter.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.664 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-instance-data.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.696 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/operating-system.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.725 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-watchdog.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.763 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vmware.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.791 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/image-signature-verification.json loaded to database.\x1b[00m\n2019-11-21 06:32:39.906 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-resource-allocation-setting-data.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.001 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/software-databases.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.058 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-host-capabilities.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.122 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-libvirt-image.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.145 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-hypervisor.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.232 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-storage-allocation-setting-data.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.251 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-guest-shutdown.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.284 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-cpu-pinning.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.301 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-aggr-iops-filter.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.322 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-xenapi.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.367 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-libvirt.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.402 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/glance-common-image-props.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.423 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vmware-flavor.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.451 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-randomgen.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.468 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-trust.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.500 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-guest-memory-backing.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.549 28477 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/software-runtimes.json loaded to database.\x1b[00m\n2019-11-21 06:32:40.549 28477 INFO glance.db.sqlalchemy.metadata [-] Metadata loading finished\x1b[00m', 'stdout': ''}
2019-11-21 06:32:40,616 [salt.state       :1951][INFO    ][26952] Completed state [glance-manage db_load_metadefs] at time 06:32:40.616469 duration_in_ms=3395.109
2019-11-21 06:32:40,617 [salt.state       :1780][INFO    ][26952] Running state [/etc/default/glance-api] at time 06:32:40.617855
2019-11-21 06:32:40,618 [salt.state       :1813][INFO    ][26952] Executing state file.managed for [/etc/default/glance-api]
2019-11-21 06:32:40,640 [salt.fileclient  :1219][INFO    ][26952] Fetching file from saltenv 'base', ** done ** 'glance/files/default'
2019-11-21 06:32:40,651 [salt.state       :300 ][INFO    ][26952] File changed:
New file
2019-11-21 06:32:40,652 [salt.state       :1951][INFO    ][26952] Completed state [/etc/default/glance-api] at time 06:32:40.652174 duration_in_ms=34.32
2019-11-21 06:32:40,652 [salt.state       :1780][INFO    ][26952] Running state [/etc/default/glance-registry] at time 06:32:40.652735
2019-11-21 06:32:40,653 [salt.state       :1813][INFO    ][26952] Executing state file.managed for [/etc/default/glance-registry]
2019-11-21 06:32:40,672 [salt.state       :300 ][INFO    ][26952] File changed:
New file
2019-11-21 06:32:40,673 [salt.state       :1951][INFO    ][26952] Completed state [/etc/default/glance-registry] at time 06:32:40.673236 duration_in_ms=20.501
2019-11-21 06:32:40,673 [salt.state       :1780][INFO    ][26952] Running state [/etc/default/glance-glare] at time 06:32:40.673807
2019-11-21 06:32:40,674 [salt.state       :1813][INFO    ][26952] Executing state file.managed for [/etc/default/glance-glare]
2019-11-21 06:32:40,693 [salt.state       :300 ][INFO    ][26952] File changed:
New file
2019-11-21 06:32:40,693 [salt.state       :1951][INFO    ][26952] Completed state [/etc/default/glance-glare] at time 06:32:40.693770 duration_in_ms=19.963
2019-11-21 06:32:40,696 [salt.state       :1780][INFO    ][26952] Running state [glance-api] at time 06:32:40.696581
2019-11-21 06:32:40,696 [salt.state       :1813][INFO    ][26952] Executing state service.running for [glance-api]
2019-11-21 06:32:40,697 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['systemctl', 'status', 'glance-api.service', '-n', '0'] in directory '/root'
2019-11-21 06:32:40,713 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['systemctl', 'is-active', 'glance-api.service'] in directory '/root'
2019-11-21 06:32:40,725 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['systemctl', 'is-enabled', 'glance-api.service'] in directory '/root'
2019-11-21 06:32:40,739 [salt.state       :300 ][INFO    ][26952] The service glance-api is already running
2019-11-21 06:32:40,739 [salt.state       :1951][INFO    ][26952] Completed state [glance-api] at time 06:32:40.739885 duration_in_ms=43.303
2019-11-21 06:32:40,740 [salt.state       :1780][INFO    ][26952] Running state [glance-api] at time 06:32:40.740300
2019-11-21 06:32:40,740 [salt.state       :1813][INFO    ][26952] Executing state service.mod_watch for [glance-api]
2019-11-21 06:32:40,741 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['systemctl', 'is-active', 'glance-api.service'] in directory '/root'
2019-11-21 06:32:40,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'glance-api.service'] in directory '/root'
2019-11-21 06:32:40,812 [salt.state       :300 ][INFO    ][26952] {'glance-api': True}
2019-11-21 06:32:40,812 [salt.state       :1951][INFO    ][26952] Completed state [glance-api] at time 06:32:40.812807 duration_in_ms=72.507
2019-11-21 06:32:40,814 [salt.state       :1780][INFO    ][26952] Running state [glance-registry] at time 06:32:40.814765
2019-11-21 06:32:40,815 [salt.state       :1813][INFO    ][26952] Executing state service.running for [glance-registry]
2019-11-21 06:32:40,815 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['systemctl', 'status', 'glance-registry.service', '-n', '0'] in directory '/root'
2019-11-21 06:32:40,831 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['systemctl', 'is-active', 'glance-registry.service'] in directory '/root'
2019-11-21 06:32:40,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['systemctl', 'is-enabled', 'glance-registry.service'] in directory '/root'
2019-11-21 06:32:40,858 [salt.state       :300 ][INFO    ][26952] The service glance-registry is already running
2019-11-21 06:32:40,858 [salt.state       :1951][INFO    ][26952] Completed state [glance-registry] at time 06:32:40.858777 duration_in_ms=44.012
2019-11-21 06:32:40,859 [salt.state       :1780][INFO    ][26952] Running state [glance-registry] at time 06:32:40.859062
2019-11-21 06:32:40,859 [salt.state       :1813][INFO    ][26952] Executing state service.mod_watch for [glance-registry]
2019-11-21 06:32:40,860 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['systemctl', 'is-active', 'glance-registry.service'] in directory '/root'
2019-11-21 06:32:40,873 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'glance-registry.service'] in directory '/root'
2019-11-21 06:32:40,897 [salt.state       :300 ][INFO    ][26952] {'glance-registry': True}
2019-11-21 06:32:40,901 [salt.state       :1951][INFO    ][26952] Completed state [glance-registry] at time 06:32:40.901115 duration_in_ms=42.053
2019-11-21 06:32:40,906 [salt.state       :1780][INFO    ][26952] Running state [glance-cache-pruner] at time 06:32:40.906806
2019-11-21 06:32:40,908 [salt.state       :1813][INFO    ][26952] Executing state cron.present for [glance-cache-pruner]
2019-11-21 06:32:40,908 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command 'crontab -u glance -l' in directory '/root'
2019-11-21 06:32:40,924 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command 'crontab -u glance /tmp/__salt.tmp.hovMWB' in directory '/root'
2019-11-21 06:32:40,937 [salt.state       :300 ][INFO    ][26952] {'glance': 'glance-cache-pruner'}
2019-11-21 06:32:40,938 [salt.state       :1951][INFO    ][26952] Completed state [glance-cache-pruner] at time 06:32:40.938421 duration_in_ms=31.615
2019-11-21 06:32:40,939 [salt.state       :1780][INFO    ][26952] Running state [glance-cache-cleaner] at time 06:32:40.939172
2019-11-21 06:32:40,939 [salt.state       :1813][INFO    ][26952] Executing state cron.present for [glance-cache-cleaner]
2019-11-21 06:32:40,940 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command 'crontab -u glance -l' in directory '/root'
2019-11-21 06:32:40,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26952] Executing command 'crontab -u glance /tmp/__salt.tmp._HsNNG' in directory '/root'
2019-11-21 06:32:40,967 [salt.state       :300 ][INFO    ][26952] {'glance': 'glance-cache-cleaner'}
2019-11-21 06:32:40,968 [salt.state       :1951][INFO    ][26952] Completed state [glance-cache-cleaner] at time 06:32:40.968280 duration_in_ms=29.108
2019-11-21 06:32:40,969 [salt.state       :1780][INFO    ][26952] Running state [/srv/glance] at time 06:32:40.969072
2019-11-21 06:32:40,969 [salt.state       :1813][INFO    ][26952] Executing state file.directory for [/srv/glance]
2019-11-21 06:32:40,971 [salt.state       :300 ][INFO    ][26952] {'/srv/glance': 'New Dir'}
2019-11-21 06:32:40,971 [salt.state       :1951][INFO    ][26952] Completed state [/srv/glance] at time 06:32:40.971305 duration_in_ms=2.233
2019-11-21 06:32:40,971 [salt.state       :1780][INFO    ][26952] Running state [/var/lib/glance/images/] at time 06:32:40.971826
2019-11-21 06:32:40,972 [salt.state       :1813][INFO    ][26952] Executing state file.directory for [/var/lib/glance/images/]
2019-11-21 06:32:40,973 [salt.state       :300 ][INFO    ][26952] Directory /var/lib/glance/images is in the correct state
Directory /var/lib/glance/images updated
2019-11-21 06:32:40,973 [salt.state       :1951][INFO    ][26952] Completed state [/var/lib/glance/images/] at time 06:32:40.973482 duration_in_ms=1.656
2019-11-21 06:32:40,982 [salt.minion      :1711][INFO    ][26952] Returning information for job: 20191121063159393052
2019-11-21 06:32:41,711 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121063241701035
2019-11-21 06:32:41,745 [salt.minion      :1432][INFO    ][28616] Starting a new job with PID 28616
2019-11-21 06:32:48,430 [salt.state       :915 ][INFO    ][28616] Loading fresh modules for state activity
2019-11-21 06:32:48,484 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'nova/init.sls'
2019-11-21 06:32:48,517 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'nova/controller.sls'
2019-11-21 06:32:49,513 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'nova/db/offline_sync.sls'
2019-11-21 06:32:49,668 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'nova/db/online_sync.sls'
2019-11-21 06:32:49,813 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'nova/_ssl/mysql.sls'
2019-11-21 06:32:49,973 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'nova/_ssl/rabbitmq.sls'
2019-11-21 06:32:50,640 [keyring.backend  :154 ][INFO    ][28616] Loading Windows (alt)
2019-11-21 06:32:50,644 [keyring.backend  :154 ][INFO    ][28616] Loading pyfs
2019-11-21 06:32:50,645 [keyring.backend  :154 ][INFO    ][28616] Loading multi
2019-11-21 06:32:50,646 [keyring.backend  :154 ][INFO    ][28616] Loading Google
2019-11-21 06:32:50,647 [keyring.backend  :154 ][INFO    ][28616] Loading Gnome
2019-11-21 06:32:50,651 [keyring.backend  :154 ][INFO    ][28616] Loading keyczar
2019-11-21 06:32:50,652 [keyring.backend  :154 ][INFO    ][28616] Loading file
2019-11-21 06:32:50,652 [keyring.backend  :154 ][INFO    ][28616] Loading kwallet
2019-11-21 06:32:51,461 [salt.state       :1780][INFO    ][28616] Running state [apache2] at time 06:32:51.461229
2019-11-21 06:32:51,461 [salt.state       :1813][INFO    ][28616] Executing state pkg.installed for [apache2]
2019-11-21 06:32:51,463 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:32:51,881 [salt.state       :300 ][INFO    ][28616] All specified packages are already installed
2019-11-21 06:32:51,882 [salt.state       :1951][INFO    ][28616] Completed state [apache2] at time 06:32:51.881966 duration_in_ms=420.737
2019-11-21 06:32:51,882 [salt.state       :1780][INFO    ][28616] Running state [openssl] at time 06:32:51.882378
2019-11-21 06:32:51,882 [salt.state       :1813][INFO    ][28616] Executing state pkg.installed for [openssl]
2019-11-21 06:32:51,891 [salt.state       :300 ][INFO    ][28616] All specified packages are already installed
2019-11-21 06:32:51,892 [salt.state       :1951][INFO    ][28616] Completed state [openssl] at time 06:32:51.892075 duration_in_ms=9.697
2019-11-21 06:32:51,893 [salt.state       :1780][INFO    ][28616] Running state [a2enmod ssl] at time 06:32:51.892977
2019-11-21 06:32:51,893 [salt.state       :1813][INFO    ][28616] Executing state cmd.run for [a2enmod ssl]
2019-11-21 06:32:51,893 [salt.state       :300 ][INFO    ][28616] /etc/apache2/mods-enabled/ssl.load exists
2019-11-21 06:32:51,894 [salt.state       :1951][INFO    ][28616] Completed state [a2enmod ssl] at time 06:32:51.894045 duration_in_ms=1.068
2019-11-21 06:32:51,894 [salt.state       :1780][INFO    ][28616] Running state [a2enmod rewrite] at time 06:32:51.894804
2019-11-21 06:32:51,895 [salt.state       :1813][INFO    ][28616] Executing state cmd.run for [a2enmod rewrite]
2019-11-21 06:32:51,895 [salt.state       :300 ][INFO    ][28616] /etc/apache2/mods-enabled/rewrite.load exists
2019-11-21 06:32:51,895 [salt.state       :1951][INFO    ][28616] Completed state [a2enmod rewrite] at time 06:32:51.895801 duration_in_ms=0.997
2019-11-21 06:32:51,896 [salt.state       :1780][INFO    ][28616] Running state [libapache2-mod-wsgi] at time 06:32:51.896520
2019-11-21 06:32:51,896 [salt.state       :1813][INFO    ][28616] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-11-21 06:32:51,905 [salt.state       :300 ][INFO    ][28616] All specified packages are already installed
2019-11-21 06:32:51,906 [salt.state       :1951][INFO    ][28616] Completed state [libapache2-mod-wsgi] at time 06:32:51.906221 duration_in_ms=9.7
2019-11-21 06:32:51,906 [salt.state       :1780][INFO    ][28616] Running state [a2enmod wsgi] at time 06:32:51.906952
2019-11-21 06:32:51,907 [salt.state       :1813][INFO    ][28616] Executing state cmd.run for [a2enmod wsgi]
2019-11-21 06:32:51,907 [salt.state       :300 ][INFO    ][28616] /etc/apache2/mods-enabled/wsgi.load exists
2019-11-21 06:32:51,908 [salt.state       :1951][INFO    ][28616] Completed state [a2enmod wsgi] at time 06:32:51.907965 duration_in_ms=1.013
2019-11-21 06:32:51,908 [salt.state       :1780][INFO    ][28616] Running state [a2enmod status -q] at time 06:32:51.908695
2019-11-21 06:32:51,909 [salt.state       :1813][INFO    ][28616] Executing state cmd.run for [a2enmod status -q]
2019-11-21 06:32:51,909 [salt.state       :300 ][INFO    ][28616] /etc/apache2/mods-enabled/status.load exists
2019-11-21 06:32:51,909 [salt.state       :1951][INFO    ][28616] Completed state [a2enmod status -q] at time 06:32:51.909731 duration_in_ms=1.036
2019-11-21 06:32:51,913 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:32:51.913212
2019-11-21 06:32:51,913 [salt.state       :1813][INFO    ][28616] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-11-21 06:32:51,914 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-11-21 06:32:51,914 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:32:51.914244 duration_in_ms=1.032
2019-11-21 06:32:51,914 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:32:51.914558
2019-11-21 06:32:51,914 [salt.state       :1813][INFO    ][28616] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-11-21 06:32:51,915 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-11-21 06:32:51,915 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:32:51.915507 duration_in_ms=0.949
2019-11-21 06:32:51,915 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:32:51.915808
2019-11-21 06:32:51,916 [salt.state       :1813][INFO    ][28616] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-11-21 06:32:51,916 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-11-21 06:32:51,916 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:32:51.916763 duration_in_ms=0.955
2019-11-21 06:32:51,917 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:32:51.917085
2019-11-21 06:32:51,917 [salt.state       :1813][INFO    ][28616] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-11-21 06:32:51,917 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-11-21 06:32:51,918 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:32:51.918015 duration_in_ms=0.93
2019-11-21 06:32:51,921 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 06:32:51.921323
2019-11-21 06:32:51,921 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-11-21 06:32:52,003 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-11-21 06:32:52,004 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 06:32:52.004126 duration_in_ms=82.803
2019-11-21 06:32:52,005 [salt.state       :1780][INFO    ][28616] Running state [a2enmod mpm_event] at time 06:32:52.005831
2019-11-21 06:32:52,006 [salt.state       :1813][INFO    ][28616] Executing state cmd.run for [a2enmod mpm_event]
2019-11-21 06:32:52,006 [salt.state       :300 ][INFO    ][28616] /etc/apache2/mods-enabled/mpm_event.load exists
2019-11-21 06:32:52,007 [salt.state       :1951][INFO    ][28616] Completed state [a2enmod mpm_event] at time 06:32:52.006981 duration_in_ms=1.15
2019-11-21 06:32:52,007 [salt.state       :1780][INFO    ][28616] Running state [apache_server_service_task] at time 06:32:52.007891
2019-11-21 06:32:52,008 [salt.state       :1813][INFO    ][28616] Executing state test.show_notification for [apache_server_service_task]
2019-11-21 06:32:52,008 [salt.state       :300 ][INFO    ][28616] Running apache.server.service
2019-11-21 06:32:52,008 [salt.state       :1951][INFO    ][28616] Completed state [apache_server_service_task] at time 06:32:52.008937 duration_in_ms=1.046
2019-11-21 06:32:52,009 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/ports.conf] at time 06:32:52.009766
2019-11-21 06:32:52,010 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/apache2/ports.conf]
2019-11-21 06:32:52,084 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/ports.conf is in the correct state
2019-11-21 06:32:52,084 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/ports.conf] at time 06:32:52.084575 duration_in_ms=74.809
2019-11-21 06:32:52,085 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/conf-available/security.conf] at time 06:32:52.085357
2019-11-21 06:32:52,085 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-11-21 06:32:52,160 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/conf-available/security.conf is in the correct state
2019-11-21 06:32:52,160 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/conf-available/security.conf] at time 06:32:52.160619 duration_in_ms=75.262
2019-11-21 06:32:52,177 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 06:32:52.177667
2019-11-21 06:32:52,178 [salt.state       :1813][INFO    ][28616] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-11-21 06:32:52,178 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-11-21 06:32:52,178 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 06:32:52.178657 duration_in_ms=0.99
2019-11-21 06:32:52,179 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:32:52.179409
2019-11-21 06:32:52,179 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-11-21 06:32:52,413 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-11-21 06:32:52,413 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:32:52.413319 duration_in_ms=233.908
2019-11-21 06:32:52,414 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:32:52.414199
2019-11-21 06:32:52,414 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-11-21 06:32:52,769 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-11-21 06:32:52,769 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:32:52.769658 duration_in_ms=355.459
2019-11-21 06:32:52,770 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:32:52.770457
2019-11-21 06:32:52,770 [salt.state       :1813][INFO    ][28616] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-11-21 06:32:52,772 [salt.state       :300 ][INFO    ][28616] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-11-21 06:32:52,772 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:32:52.772642 duration_in_ms=2.186
2019-11-21 06:32:52,773 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:32:52.773347
2019-11-21 06:32:52,773 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-11-21 06:32:53,001 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-11-21 06:32:53,001 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:32:53.001474 duration_in_ms=228.126
2019-11-21 06:32:53,002 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:32:53.002466
2019-11-21 06:32:53,002 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/apache2/sites-available/wsgi_openstack_web.conf]
2019-11-21 06:32:53,226 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/sites-available/wsgi_openstack_web.conf is in the correct state
2019-11-21 06:32:53,226 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:32:53.226446 duration_in_ms=223.978
2019-11-21 06:32:53,227 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:32:53.227239
2019-11-21 06:32:53,227 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-11-21 06:32:53,455 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-11-21 06:32:53,455 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:32:53.455925 duration_in_ms=228.686
2019-11-21 06:32:53,456 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:32:53.456815
2019-11-21 06:32:53,457 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-11-21 06:32:53,685 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-11-21 06:32:53,685 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:32:53.685272 duration_in_ms=228.456
2019-11-21 06:32:53,691 [salt.state       :1780][INFO    ][28616] Running state [apache2] at time 06:32:53.691756
2019-11-21 06:32:53,692 [salt.state       :1813][INFO    ][28616] Executing state service.running for [apache2]
2019-11-21 06:32:53,692 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-11-21 06:32:53,740 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:32:53,760 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:32:53,782 [salt.state       :300 ][INFO    ][28616] The service apache2 is already running
2019-11-21 06:32:53,782 [salt.state       :1951][INFO    ][28616] Completed state [apache2] at time 06:32:53.782883 duration_in_ms=91.126
2019-11-21 06:32:53,784 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/conf-enabled/security.conf] at time 06:32:53.784343
2019-11-21 06:32:53,784 [salt.state       :1813][INFO    ][28616] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-11-21 06:32:53,786 [salt.state       :300 ][INFO    ][28616] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-11-21 06:32:53,787 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/conf-enabled/security.conf] at time 06:32:53.786995 duration_in_ms=2.652
2019-11-21 06:32:53,787 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:32:53.787357
2019-11-21 06:32:53,787 [salt.state       :1813][INFO    ][28616] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-11-21 06:32:53,788 [salt.state       :300 ][INFO    ][28616] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-11-21 06:32:53,788 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:32:53.788272 duration_in_ms=0.915
2019-11-21 06:32:53,794 [salt.state       :1780][INFO    ][28616] Running state [debconf-utils] at time 06:32:53.794365
2019-11-21 06:32:53,794 [salt.state       :1813][INFO    ][28616] Executing state pkg.installed for [debconf-utils]
2019-11-21 06:32:53,804 [salt.state       :300 ][INFO    ][28616] All specified packages are already installed
2019-11-21 06:32:53,804 [salt.state       :1951][INFO    ][28616] Completed state [debconf-utils] at time 06:32:53.804945 duration_in_ms=10.579
2019-11-21 06:32:53,805 [salt.state       :1780][INFO    ][28616] Running state [nova-consoleproxy] at time 06:32:53.805612
2019-11-21 06:32:53,805 [salt.state       :1813][INFO    ][28616] Executing state debconf.set for [nova-consoleproxy]
2019-11-21 06:32:53,806 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command 'debconf-get-selections' in directory '/root'
2019-11-21 06:32:54,121 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command 'debconf-set-selections /tmp/salt-Cn2SmL' in directory '/root'
2019-11-21 06:32:54,320 [salt.state       :300 ][INFO    ][28616] {'nova-consoleproxy/daemon_type': 'novnc'}
2019-11-21 06:32:54,321 [salt.state       :1951][INFO    ][28616] Completed state [nova-consoleproxy] at time 06:32:54.321175 duration_in_ms=515.561
2019-11-21 06:32:54,327 [salt.state       :1780][INFO    ][28616] Running state [nova] at time 06:32:54.327668
2019-11-21 06:32:54,328 [salt.state       :1813][INFO    ][28616] Executing state group.present for [nova]
2019-11-21 06:32:54,329 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['groupadd', '-g 303', '-r', 'nova'] in directory '/root'
2019-11-21 06:32:54,359 [salt.state       :300 ][INFO    ][28616] {'passwd': 'x', 'gid': 303, 'name': 'nova', 'members': []}
2019-11-21 06:32:54,360 [salt.state       :1951][INFO    ][28616] Completed state [nova] at time 06:32:54.360790 duration_in_ms=33.122
2019-11-21 06:32:54,362 [salt.state       :1780][INFO    ][28616] Running state [nova] at time 06:32:54.362206
2019-11-21 06:32:54,363 [salt.state       :1813][INFO    ][28616] Executing state user.present for [nova]
2019-11-21 06:32:54,365 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['useradd', '-s', '/bin/false', '-u', '303', '-g', '303', '-m', '-d', '/var/lib/nova', '-r', 'nova'] in directory '/root'
2019-11-21 06:32:54,397 [salt.state       :300 ][INFO    ][28616] {'shell': '/bin/false', 'workphone': '', 'uid': 303, 'passwd': 'x', 'roomnumber': '', 'groups': ['nova'], 'home': '/var/lib/nova', 'name': 'nova', 'gid': 303, 'fullname': '', 'homephone': ''}
2019-11-21 06:32:54,397 [salt.state       :1951][INFO    ][28616] Completed state [nova] at time 06:32:54.397596 duration_in_ms=35.389
2019-11-21 06:32:54,399 [salt.state       :1780][INFO    ][28616] Running state [nova-api] at time 06:32:54.399717
2019-11-21 06:32:54,400 [salt.state       :1813][INFO    ][28616] Executing state pkg.installed for [nova-api]
2019-11-21 06:32:54,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['apt-cache', '-q', 'policy', 'nova-api'] in directory '/root'
2019-11-21 06:32:54,498 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:32:56,588 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:32:56,619 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-api'] in directory '/root'
2019-11-21 06:32:56,790 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063256779812
2019-11-21 06:32:56,805 [salt.minion      :1432][INFO    ][29090] Starting a new job with PID 29090
2019-11-21 06:32:56,820 [salt.minion      :1711][INFO    ][29090] Returning information for job: 20191121063256779812
2019-11-21 06:33:24,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:33:24,949 [salt.state       :300 ][INFO    ][28616] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pypowervm' changed from 'absent' to '1.1.16-1~u16.04+mcp'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'zvmcloudconnector-common' changed from 'absent' to '1.2.3-0ubuntu3~u16.04+mcp'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'libboost-thread1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'
'qemu-kvm-spice' changed from 'absent' to '1'
'python-microversion-parse' changed from 'absent' to '0.2.1-0.1~u16.04+mcp'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.6'
'python-paramiko' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-nova' changed from 'absent' to '2:18.2.3-4~u16.04+mcp135'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'nova-api' changed from 'absent' to '2:18.2.3-4~u16.04+mcp135'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1.7.13~u16.04+mcp3'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libboost-random1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'python-oslo.versionedobjects' changed from 'absent' to '1.33.3-1~u16.04+mcp9'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.2'
'nova-common' changed from 'absent' to '2:18.2.3-4~u16.04+mcp135'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.4'
'libboost-iostreams1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'python-tooz' changed from 'absent' to '1.60.2-1.0~u16.04+mcp2'
'libboost-system1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libcaca0' changed from 'absent' to '0.99.beta19-2ubuntu0.16.04.1'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.6'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-system-i386' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1.8.10~u16.04+mcp2'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1.7.13~u16.04+mcp3'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1.8.10~u16.04+mcp2'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'python2.7-paramiko' changed from 'absent' to '1'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-os-traits' changed from 'absent' to '0.5.0-1.0~u16.04+mcp5'
'python-os-vif' changed from 'absent' to '1.9.1-1.0~u16.04+mcp10'
'qemu-system-x86-64' changed from 'absent' to '1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'python-oslo.reports' changed from 'absent' to '1.28.0-2~u16.04+mcp6'
'python-os-xenapi' changed from 'absent' to '0.3.3-1~u16.04+mcp'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-zvmcloudconnector' changed from 'absent' to '1.2.3-0ubuntu3~u16.04+mcp'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3ubuntu0.1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1.8.10~u16.04+mcp2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'librados2' changed from 'absent' to '10.2.11-0ubuntu0.16.04.2'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '10.2.11-0ubuntu0.16.04.2'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1.7.13~u16.04+mcp3'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1.7.13~u16.04+mcp3'
'python-zake' changed from 'absent' to '0.1.6-1'
'python2.7-nova' changed from 'absent' to '1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1.7.13~u16.04+mcp3'
'python-pyroute2' changed from 'absent' to '0.4.21-0.1~u16.04+mcp1'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python2.7-pyroute2' changed from 'absent' to '1'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'libflac8' changed from 'absent' to '1.3.1-4'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2019-11-21 06:33:24,978 [salt.state       :915 ][INFO    ][28616] Loading fresh modules for state activity
2019-11-21 06:33:25,034 [salt.state       :1951][INFO    ][28616] Completed state [nova-api] at time 06:33:25.034488 duration_in_ms=30634.771
2019-11-21 06:33:25,043 [salt.state       :1780][INFO    ][28616] Running state [nova-conductor] at time 06:33:25.043711
2019-11-21 06:33:25,044 [salt.state       :1813][INFO    ][28616] Executing state pkg.installed for [nova-conductor]
2019-11-21 06:33:25,960 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:33:25,990 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-conductor'] in directory '/root'
2019-11-21 06:33:26,822 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063326809661
2019-11-21 06:33:26,836 [salt.minion      :1432][INFO    ][31182] Starting a new job with PID 31182
2019-11-21 06:33:26,901 [salt.minion      :1711][INFO    ][31182] Returning information for job: 20191121063326809661
2019-11-21 06:33:29,268 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:33:29,316 [salt.state       :300 ][INFO    ][28616] Made the following changes:
'nova-conductor' changed from 'absent' to '2:18.2.3-4~u16.04+mcp135'

2019-11-21 06:33:29,342 [salt.state       :915 ][INFO    ][28616] Loading fresh modules for state activity
2019-11-21 06:33:29,383 [salt.state       :1951][INFO    ][28616] Completed state [nova-conductor] at time 06:33:29.383922 duration_in_ms=4340.21
2019-11-21 06:33:29,390 [salt.state       :1780][INFO    ][28616] Running state [nova-consoleauth] at time 06:33:29.390478
2019-11-21 06:33:29,390 [salt.state       :1813][INFO    ][28616] Executing state pkg.installed for [nova-consoleauth]
2019-11-21 06:33:30,127 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:33:30,162 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-consoleauth'] in directory '/root'
2019-11-21 06:33:33,541 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:33:33,594 [salt.state       :300 ][INFO    ][28616] Made the following changes:
'nova-consoleauth' changed from 'absent' to '2:18.2.3-4~u16.04+mcp135'

2019-11-21 06:33:33,620 [salt.state       :915 ][INFO    ][28616] Loading fresh modules for state activity
2019-11-21 06:33:33,660 [salt.state       :1951][INFO    ][28616] Completed state [nova-consoleauth] at time 06:33:33.660023 duration_in_ms=4269.545
2019-11-21 06:33:33,666 [salt.state       :1780][INFO    ][28616] Running state [nova-scheduler] at time 06:33:33.666615
2019-11-21 06:33:33,667 [salt.state       :1813][INFO    ][28616] Executing state pkg.installed for [nova-scheduler]
2019-11-21 06:33:34,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:33:34,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-scheduler'] in directory '/root'
2019-11-21 06:33:37,887 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:33:37,940 [salt.state       :300 ][INFO    ][28616] Made the following changes:
'nova-scheduler' changed from 'absent' to '2:18.2.3-4~u16.04+mcp135'

2019-11-21 06:33:37,966 [salt.state       :915 ][INFO    ][28616] Loading fresh modules for state activity
2019-11-21 06:33:38,014 [salt.state       :1951][INFO    ][28616] Completed state [nova-scheduler] at time 06:33:38.014728 duration_in_ms=4348.112
2019-11-21 06:33:38,024 [salt.state       :1780][INFO    ][28616] Running state [python-novaclient] at time 06:33:38.024706
2019-11-21 06:33:38,025 [salt.state       :1813][INFO    ][28616] Executing state pkg.installed for [python-novaclient]
2019-11-21 06:33:38,844 [salt.state       :300 ][INFO    ][28616] All specified packages are already installed
2019-11-21 06:33:38,845 [salt.state       :1951][INFO    ][28616] Completed state [python-novaclient] at time 06:33:38.845603 duration_in_ms=820.896
2019-11-21 06:33:38,847 [salt.state       :1780][INFO    ][28616] Running state [nova-novncproxy] at time 06:33:38.846966
2019-11-21 06:33:38,847 [salt.state       :1813][INFO    ][28616] Executing state pkg.installed for [nova-novncproxy]
2019-11-21 06:33:38,875 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:33:38,905 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-novncproxy'] in directory '/root'
2019-11-21 06:33:43,802 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:33:43,858 [salt.state       :300 ][INFO    ][28616] Made the following changes:
'nova-novncproxy' changed from 'absent' to '2:18.2.3-4~u16.04+mcp135'
'python-novnc' changed from 'absent' to '1:0.6.1-1.1~u16.04+mcp3'
'websockify' changed from 'absent' to '0.8.0+dfsg1-7~u16.04+mcp5'
'websockify-common' changed from 'absent' to '0.8.0+dfsg1-7~u16.04+mcp5'
'libjs-swfobject' changed from 'absent' to '2.2+dfsg-1'
'novnc' changed from 'absent' to '1:0.6.1-1.1~u16.04+mcp3'
'python-websockify' changed from 'absent' to '0.8.0+dfsg1-7~u16.04+mcp5'

2019-11-21 06:33:43,888 [salt.state       :915 ][INFO    ][28616] Loading fresh modules for state activity
2019-11-21 06:33:43,930 [salt.state       :1951][INFO    ][28616] Completed state [nova-novncproxy] at time 06:33:43.930591 duration_in_ms=5083.625
2019-11-21 06:33:43,934 [salt.state       :1780][INFO    ][28616] Running state [nova_ssl_mysql] at time 06:33:43.934018
2019-11-21 06:33:43,934 [salt.state       :1813][INFO    ][28616] Executing state test.show_notification for [nova_ssl_mysql]
2019-11-21 06:33:43,935 [salt.state       :300 ][INFO    ][28616] Running nova._ssl.mysql
2019-11-21 06:33:43,935 [salt.state       :1951][INFO    ][28616] Completed state [nova_ssl_mysql] at time 06:33:43.935458 duration_in_ms=1.44
2019-11-21 06:33:43,936 [salt.state       :1780][INFO    ][28616] Running state [nova_controller_ssl_rabbitmq] at time 06:33:43.936511
2019-11-21 06:33:43,937 [salt.state       :1813][INFO    ][28616] Executing state test.show_notification for [nova_controller_ssl_rabbitmq]
2019-11-21 06:33:43,937 [salt.state       :300 ][INFO    ][28616] Running nova._ssl.rabbitmq
2019-11-21 06:33:43,938 [salt.state       :1951][INFO    ][28616] Completed state [nova_controller_ssl_rabbitmq] at time 06:33:43.937981 duration_in_ms=1.47
2019-11-21 06:33:44,083 [salt.state       :1780][INFO    ][28616] Running state [/etc/nova/nova.conf] at time 06:33:44.083197
2019-11-21 06:33:44,084 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/nova/nova.conf]
2019-11-21 06:33:44,124 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'nova/files/rocky/nova-controller.conf.Debian'
2019-11-21 06:33:44,968 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/castellan/_barbican.conf'
2019-11-21 06:33:45,008 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/keystoneauth/_type_password.conf'
2019-11-21 06:33:45,061 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/keystonemiddleware/_auth_token.conf'
2019-11-21 06:33:45,236 [salt.state       :300 ][INFO    ][28616] File changed:
--- 
+++ 
@@ -1,7 +1,5 @@
+
 [DEFAULT]
-log_dir = /var/log/nova
-lock_path = /var/lock/nova
-state_path = /var/lib/nova
 
 #
 # From nova.conf
@@ -63,7 +61,7 @@
 # *  period with offset, example: ``month@15`` will result in monthly audits
 #    starting on 15th day of month.
 #  (string value)
-#instance_usage_audit_period = month
+instance_usage_audit_period = hour
 
 #
 # Start and use a daemon that can run the commands that need to be run with
@@ -99,7 +97,7 @@
 # * ``powervm.PowerVMDriver``
 # * ``zvm.ZVMDriver``
 #  (string value)
-#compute_driver = <None>
+compute_driver = libvirt.LibvirtDriver
 
 #
 # Allow destination machine to match source for resize. Useful when
@@ -108,7 +106,7 @@
 # the same host to the destination options. Also set to true
 # if you allow the ServerGroupAffinityFilter and need to resize.
 #  (boolean value)
-#allow_resize_to_same_host = false
+allow_resize_to_same_host = true
 
 #
 # Image properties that should not be inherited from the instance
@@ -204,7 +202,7 @@
 # * True: Instances should fail after VIF plugging timeout
 # * False: Instances should continue booting after VIF plugging timeout
 #  (boolean value)
-#vif_plugging_is_fatal = true
+vif_plugging_is_fatal = true
 
 #
 # Timeout for Neutron VIF plugging event message arrival.
@@ -223,7 +221,7 @@
 #   arrive at all.
 #  (integer value)
 # Minimum value: 0
-#vif_plugging_timeout = 300
+vif_plugging_timeout = 300
 
 # Path to '/etc/network/interfaces' template.
 #
@@ -461,7 +459,7 @@
 # * Any valid positive integer or float value
 #  (floating point value)
 # Minimum value: 0
-#cpu_allocation_ratio = 0.0
+cpu_allocation_ratio = 16.0
 
 #
 # This option helps you specify virtual RAM to physical RAM
@@ -490,7 +488,7 @@
 # * Any valid positive integer or float value
 #  (floating point value)
 # Minimum value: 0
-#ram_allocation_ratio = 0.0
+ram_allocation_ratio = 1.5
 
 #
 # This option helps you specify virtual disk to physical disk
@@ -523,7 +521,7 @@
 # * Any valid positive integer or float value
 #  (floating point value)
 # Minimum value: 0
-#disk_allocation_ratio = 0.0
+disk_allocation_ratio = 1.0
 
 #
 # Console proxy host to be used to connect to instances on this host. It is the
@@ -561,10 +559,6 @@
 # * $state_path/instances where state_path is a config option that specifies
 #   the top-level directory for maintaining nova's state. (default) or
 #   Any string representing directory path.
-#
-# Related options:
-#
-# * ``[workarounds]/ensure_libvirt_rbd_instance_dir_cleanup``
 #  (string value)
 #instances_path = $state_path/instances
 
@@ -575,6 +569,7 @@
 #  (boolean value)
 #instance_usage_audit = false
 
+
 #
 # Maximum number of 1 second retries in live_migration. It specifies number
 # of retries to iptables when it complains. It happens when an user continuously
@@ -649,7 +644,7 @@
 # * Any negative value is treated as 0.
 # * For any value > 0, total attempts are (value + 1)
 #  (integer value)
-#block_device_allocate_retries = 60
+block_device_allocate_retries = 600
 
 #
 # Number of greenthreads available for use to sync power states.
@@ -1243,7 +1238,7 @@
 # * routing_source_ip
 # * vpn_ip
 #  (string value)
-#my_ip = <host_ipv4>
+my_ip = 172.16.10.36
 
 #
 # The IP address which is used to connect to the block storage network.
@@ -2090,7 +2085,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#force_dhcp_release = true
+force_dhcp_release = true
 
 # DEPRECATED:
 # When this option is True, whenever a DNS entry must be updated, a fanout cast
@@ -2142,7 +2137,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#dhcp_domain = novalocal
+dhcp_domain = novalocal
 
 # DEPRECATED:
 # This option allows you to specify the L3 management library to be used.
@@ -2596,41 +2591,13 @@
 # Run as a background process. (boolean value)
 #daemon = false
 
-# Disallow non-encrypted connections. (boolean value)
-#ssl_only = false
-
 # Set to True if source host is addressed with IPv6. (boolean value)
 #source_is_ipv6 = false
 
-# Path to SSL certificate file. (string value)
-#cert = self.pem
-
-# SSL key file (if separate from cert). (string value)
-#key = <None>
-
 #
 # Path to directory with content which will be served by a web server.
 #  (string value)
 #web = /usr/share/spice-html5
-
-#
-# List of SSL ciphers allowed for novnc connection.
-# For a list of supported ciphers run `openssl ciphers`.
-#  (list value)
-#ssl_ciphers = ECDHE-RSA-AES256-GCM-SHA384,ECDHE-ECDSA-AES256-GCM-SHA384
-
-# SSL version for novnc console.
-# Depending on your Python version the actually available version
-# may not be the maximal one.
-# In this case graceful fallback to the most recent supported version
-# will be performed.
-#  (string value)
-# Possible values:
-# default - <No description provided>
-# tlsv1_1 - <No description provided>
-# tlsv1_2 - <No description provided>
-# tlsv1_3 - <No description provided>
-#ssl_version = default
 
 #
 # The directory where the Nova python modules are installed.
@@ -2662,7 +2629,7 @@
 #
 # * The full path to a directory.
 #  (string value)
-#bindir = /usr/local/bin
+#bindir = /tmp/nova/.tox/shared/local/bin
 
 #
 # The top-level directory for maintaining Nova's state.
@@ -2679,6 +2646,7 @@
 # * The full path to a directory. Defaults to value provided in ``pybasedir``.
 #  (string value)
 #state_path = $pybasedir
+state_path = /var/lib/nova
 
 #
 # This option allows setting an alternate timeout value for RPC calls
@@ -2689,7 +2657,6 @@
 # Operations with RPC calls that utilize this value:
 #
 # * live migration
-# * scheduling
 #
 # Related options:
 #
@@ -2709,7 +2676,7 @@
 #   is less than report_interval, services will routinely be considered down,
 #   because they report in too rarely.
 #  (integer value)
-#report_interval = 10
+report_interval = 60
 
 #
 # Maximum time in seconds since last check-in for up service
@@ -2723,7 +2690,7 @@
 # * report_interval (service_down_time should not be less than report_interval)
 # * scheduler.periodic_task_interval
 #  (integer value)
-#service_down_time = 60
+service_down_time = 180
 
 #
 # Enable periodic tasks.
@@ -2772,7 +2739,7 @@
 # The OpenStack API service listens on this IP address for incoming
 # requests.
 #  (string value)
-#osapi_compute_listen = 0.0.0.0
+osapi_compute_listen = 172.16.10.36
 
 #
 # Port on which the OpenStack API will listen.
@@ -2807,7 +2774,7 @@
 # The metadata API service listens on this IP address for incoming
 # requests.
 #  (string value)
-#metadata_listen = 0.0.0.0
+metadata_listen = 172.16.10.36
 
 #
 # Port on which the metadata API will listen.
@@ -2834,7 +2801,7 @@
 # * None (default value)
 #  (integer value)
 # Minimum value: 1
-#metadata_workers = <None>
+metadata_workers = 1
 
 #
 # This option specifies the driver to be used for the servicegroup service.
@@ -2861,7 +2828,6 @@
 # db - <No description provided>
 # mc - <No description provided>
 #servicegroup_driver = db
-
 #
 # From oslo.log
 #
@@ -2899,19 +2865,19 @@
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
 #watch_log_file = false
 
 # Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
 #use_syslog = false
 
 # Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
+# to enable journal support. Doing so will use the journal native protocol
+# which includes structured metadata in addition to log messages.This option is
 # ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
@@ -2934,8 +2900,8 @@
 # value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message is
-# DEBUG. (string value)
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
 # Prefix each line of exception output with this format. (string value)
@@ -2952,7 +2918,8 @@
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message. (string
+# value)
 #instance_format = "[instance: %(uuid)s] "
 
 # The format for an instance UUID that is passed with the log message. (string
@@ -2965,9 +2932,9 @@
 # Maximum number of logged messages per rate_limit_interval. (integer value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
 # value)
 #rate_limit_except_level = CRITICAL
 
@@ -3013,10 +2980,10 @@
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
@@ -3024,8 +2991,9 @@
 # exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
@@ -3083,27 +3051,28 @@
 
 # The duration between two keepalive transmissions in idle condition. The unit
 # is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
 # The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
 # acknowledgement to the previous keepalive transmission is not received. The
 # unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
 # Maximum number of (green) threads to work concurrently. (integer value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
 # Wait for message acknowledgements from receivers. This mechanism works only
@@ -3137,6 +3106,7 @@
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
+rpc_response_timeout = 30
 
 # The network address and optional user credentials for connecting to the
 # messaging backend, in URL format. The expected format is:
@@ -3150,6 +3120,7 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -3160,7 +3131,8 @@
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
+#control_exchange = keystone
+
 
 #
 # From oslo.service.periodic_task
@@ -3392,7 +3364,7 @@
 #  (integer value)
 # Minimum value: 0
 # Deprecated group/name - [DEFAULT]/osapi_max_limit
-#max_limit = 1000
+max_limit = 1000
 
 #
 # This string is prepended to the normal URL that is returned in links to the
@@ -3491,74 +3463,126 @@
 
 
 [api_database]
-connection = sqlite:////var/lib/nova/nova_api.sqlite
-#
-# The *Nova API Database* is a separate database which is used for information
-# which is used across *cells*. This database is mandatory since the Mitaka
-# release (13.0.0).
-#
-# This group should **not** be configured for the ``nova-compute`` service.
-
-#
-# From nova.conf
-#
-
-# The SQLAlchemy connection string to use to connect to the database. Do not set
-# this for the ``nova-compute`` service. (string value)
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
 #connection = <None>
+connection = mysql+pymysql://nova:opnfv_secret@172.16.10.36/nova_api?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster (NDB).
+# (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer than this
+# number of seconds will be replaced with a new one the next time they are
+# checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The option to set the minimum pool size is not supported by
+# sqlalchemy.
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
 
 # Optional URL parameters to append onto the connection URL at connect time;
 # specify as param1=value1&param2=value2&... (string value)
 #connection_parameters =
 
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
-# Deprecated group/name - [api_database]/idle_timeout
-#connection_recycle_time = 3600
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
-#max_pool_size = <None>
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-#max_overflow = <None>
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-#pool_timeout = <None>
 
 
 [barbican]
-
-#
-# From nova.conf
+#
+# From castellan.config
 #
 
 # Use this endpoint to connect to Barbican, for example:
@@ -3571,6 +3595,7 @@
 # Use this endpoint to connect to Keystone (string value)
 # Deprecated group/name - [key_manager]/auth_url
 #auth_endpoint = http://localhost/identity/v3
+auth_endpoint = http://172.16.10.36:35357/v3
 
 # Number of seconds to wait before retrying poll for key creation completion
 # (integer value)
@@ -3579,23 +3604,23 @@
 # Number of times to retry poll for key creation completion (integer value)
 #number_of_retries = 60
 
-# Specifies if insecure TLS (https) requests. If False, the server's certificate
-# will not be validated (boolean value)
+# Specifies if insecure TLS (https) requests. If False, the server's
+# certificate will not be validated (boolean value)
 #verify_ssl = true
 
-# Specifies the type of endpoint.  Allowed values are: public, private, and
+# Specifies the type of endpoint.  Allowed values are: public, internal, and
 # admin (string value)
 # Possible values:
 # public - <No description provided>
 # internal - <No description provided>
 # admin - <No description provided>
 #barbican_endpoint_type = public
+barbican_endpoint_type = internal
 
 
 [cache]
-
-#
-# From nova.conf
+#
+# From oslo.cache
 #
 
 # Prefix for building the configuration dictionary for the cache region. This
@@ -3603,9 +3628,9 @@
 # with the same configuration name. (string value)
 #config_prefix = cache.oslo
 
-# Default TTL, in seconds, for any cached item in the dogpile.cache region. This
-# applies to any cached method that doesn't have an explicit cache expiration
-# time defined for it. (integer value)
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
 #expiration_time = 600
 
 # Cache backend module. For eventlet-based or environments with hundreds of
@@ -3628,6 +3653,7 @@
 # dogpile.cache.memory_pickle - <No description provided>
 # dogpile.cache.null - <No description provided>
 #backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
 
 # Arguments supplied to the backend module. Specify this option once per
 # argument to be passed to the dogpile.cache backend. Example format:
@@ -3640,17 +3666,19 @@
 #proxies =
 
 # Global toggle for caching. (boolean value)
-#enabled = false
-
-# Extra debugging from the cache backend (cache keys, get/set/delete/etc calls).
-# This is only really useful if you need to see the specific cache-backend
-# get/set/delete calls with the keys/values.  Typically this should be left set
-# to false. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
 #debug_cache_backend = false
 
 # Memcache servers in the format of "host:port". (dogpile.cache.memcache and
 # oslo_cache.memcache_pool backends only). (list value)
 #memcache_servers = localhost:11211
+memcache_servers =172.16.10.36:11211
 
 # Number of seconds memcached server is considered dead before it is tried
 # again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
@@ -3674,8 +3702,8 @@
 #memcache_pool_connection_get_timeout = 10
 
 
+
 [cells]
-enable = False
 #
 # DEPRECATED: Cells options allow you to use cells v1 functionality in an
 # OpenStack deployment.
@@ -4213,7 +4241,7 @@
 #
 # * endpoint_template - Setting this option will override catalog_info
 #  (string value)
-#catalog_info = volumev3:cinderv3:publicURL
+catalog_info = volumev3:cinderv3:internalURL
 
 #
 # If this option is set then it will override service catalog lookup with
@@ -4241,7 +4269,7 @@
 #
 # * Any string representing region name
 #  (string value)
-#os_region_name = <None>
+os_region_name = RegionOne
 
 #
 # Number of times cinderclient should retry on any failed http call.
@@ -4271,62 +4299,40 @@
 # By default there is no availability zone restriction on volume attach.
 #  (boolean value)
 #cross_az_attach = true
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [cinder]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
@@ -4338,148 +4344,65 @@
 # (string value)
 #default_domain_name = <None>
 
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
 # User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [cinder]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Tenant ID (string value)
-#tenant_id = <None>
-
-# Tenant Name (string value)
-#tenant_name = <None>
-
-
-[compute]
-
-#
-# From nova.conf
-#
-
-#
-# Enables reporting of build failures to the scheduler.
-#
-# Any nonzero value will enable sending build failure statistics to the
-# scheduler for use by the BuildFailureWeigher.
-#
-# Possible values:
-#
-# * Any positive integer enables reporting build failures.
-# * Zero to disable reporting build failures.
-#
-# Related options:
-#
-# * [filter_scheduler]/build_failure_weight_multiplier
-#
-#  (integer value)
-#consecutive_build_service_disable_threshold = 10
-
-#
-# Time to wait in seconds before resending an ACPI shutdown signal to
-# instances.
-#
-# The overall time to wait is set by ``shutdown_timeout``.
-#
-# Possible values:
-#
-# * Any integer greater than 0 in seconds
-#
-# Related options:
-#
-# * ``shutdown_timeout``
-#  (integer value)
-# Minimum value: 1
-#shutdown_retry_interval = 10
-
-#
-# Interval for updating nova-compute-side cache of the compute node resource
-# provider's aggregates and traits info.
-#
-# This option specifies the number of seconds between attempts to update a
-# provider's aggregates and traits information in the local cache of the compute
-# node.
-#
-# Possible values:
-#
-# * Any positive integer in seconds.
-#  (integer value)
-# Minimum value: 1
-#resource_provider_association_refresh = 300
-
-#
-# Defines which physical CPUs (pCPUs) will be used for best-effort guest vCPU
-# resources.
-#
-# Currently only used by libvirt driver to place guest emulator threads when
-# hw:emulator_threads_policy:share.
-#
-# ::
-#     cpu_shared_set = "4-12,^8,15"
-#  (string value)
-#cpu_shared_set = <None>
-
-#
-# Determine if the source compute host should wait for a ``network-vif-plugged``
-# event from the (neutron) networking service before starting the actual
-# transfer
-# of the guest to the destination compute host.
-#
-# Note that this option is read on the destination host of a live migration.
-# If you set this option the same on all of your compute hosts, which you should
-# do if you use the same networking backend universally, you do not have to
-# worry about this.
-#
-# Before starting the transfer of the guest, some setup occurs on the
-# destination
-# compute host, including plugging virtual interfaces. Depending on the
-# networking backend **on the destination host**, a ``network-vif-plugged``
-# event may be triggered and then received on the source compute host and the
-# source compute can wait for that event to ensure networking is set up on the
-# destination host before starting the guest transfer in the hypervisor.
-#
-# By default, this is False for two reasons:
-#
-# 1. Backward compatibility: deployments should test this out and ensure it
-# works
-#    for them before enabling it.
-#
-# 2. The compute service cannot reliably determine which types of virtual
-#    interfaces (``port.binding:vif_type``) will send ``network-vif-plugged``
-#    events without an accompanying port ``binding:host_id`` change.
-#    Open vSwitch and linuxbridge should be OK, but OpenDaylight is at least
-#    one known backend that will not currently work in this case, see bug
-#    https://launchpad.net/bugs/1755890 for more details.
-#
-# Possible values:
-#
-# * True: wait for ``network-vif-plugged`` events before starting guest transfer
-# * False: do not wait for ``network-vif-plugged`` events before starting guest
-#   transfer (this is how things have always worked before this option
-#   was introduced)
-#
-# Related options:
-#
-# * [DEFAULT]/vif_plugging_is_fatal: if ``live_migration_wait_for_vif_plug`` is
-#   True and ``vif_plugging_timeout`` is greater than 0, and a timeout is
-#   reached, the live migration process will fail with an error but the guest
-#   transfer will not have started to the destination host
-# * [DEFAULT]/vif_plugging_timeout: if ``live_migration_wait_for_vif_plug`` is
-#   True, this controls the amount of time to wait before timing out and either
-#   failing if ``vif_plugging_is_fatal`` is True, or simply continuing with the
-#   live migration
-#  (boolean value)
-#live_migration_wait_for_vif_plug = false
+username = nova
 
 
 [conductor]
@@ -4496,7 +4419,7 @@
 # Number of workers for OpenStack Conductor service. The default will be the
 # number of CPUs available.
 #  (integer value)
-#workers = <None>
+workers = 1
 
 
 [console]
@@ -4548,8 +4471,8 @@
 #token_ttl = 600
 
 
+
 [cors]
-
 #
 # From oslo.middleware
 #
@@ -4564,7 +4487,7 @@
 
 # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
 # Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Service-Token
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
 
 # Maximum cache age of CORS preflight requests. (integer value)
 #max_age = 3600
@@ -4572,14 +4495,13 @@
 # Indicate which methods can be used during the actual request. (list value)
 #allow_methods = GET,PUT,POST,DELETE,PATCH
 
-# Indicate which header field names may be used during the actual request. (list
-# value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
 
 
 [database]
-connection = sqlite:////var/lib/nova/nova.sqlite
-
 #
 # From oslo.db
 #
@@ -4597,14 +4519,14 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://nova:opnfv_secret@172.16.10.36/nova?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
@@ -4622,8 +4544,8 @@
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
 
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
-# value)
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 # This option is deprecated for removal.
@@ -4632,17 +4554,19 @@
 # sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 10
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -4653,6 +4577,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -4669,8 +4594,8 @@
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
@@ -4692,14 +4617,6 @@
 # specify as param1=value1&param2=value2&... (string value)
 #connection_parameters =
 
-#
-# From oslo.db.concurrency
-#
-
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
 
 
 [devices]
@@ -4787,7 +4704,7 @@
 #  (integer value)
 # Minimum value: 1
 # Deprecated group/name - [DEFAULT]/scheduler_host_subset_size
-#host_subset_size = 1
+host_subset_size = 30
 
 #
 # The number of instances that can be actively performing IO on a host.
@@ -4877,7 +4794,8 @@
 # * enabled_filters
 #  (multi valued)
 # Deprecated group/name - [DEFAULT]/scheduler_available_filters
-#available_filters = nova.scheduler.filters.all_filters
+available_filters = nova.scheduler.filters.all_filters
+available_filters = nova.scheduler.filters.pci_passthrough_filter.PciPassthroughFilter
 
 #
 # Filters that the scheduler will use.
@@ -4902,7 +4820,7 @@
 #   exception will be raised.
 #  (list value)
 # Deprecated group/name - [DEFAULT]/scheduler_default_filters
-#enabled_filters = RetryFilter,AvailabilityZoneFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter
+enabled_filters = DifferentHostFilter,SameHostFilter,RetryFilter,AvailabilityZoneFilter,RamFilter,CoreFilter,DiskFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter
 
 #
 # Weighers that the scheduler will use.
@@ -5280,7 +5198,7 @@
 # "scheme://hostname:port[/path]"
 #   (i.e. "http://10.0.1.0:9292" or "https://my.glance.server/image").
 #  (list value)
-#api_servers = <None>
+api_servers = http://172.16.10.36:9292
 
 #
 # Enable glance operation retries.
@@ -5330,7 +5248,7 @@
 # * Both enable_certificate_validation and default_trusted_certificate_ids
 #   below depend on this option being enabled.
 #  (boolean value)
-#verify_glance_signatures = false
+verify_glance_signatures = true
 
 # DEPRECATED:
 # Enable certificate validation for image signature verification.
@@ -5802,147 +5720,6 @@
 #iscsi_initiator_list =
 
 
-[ironic]
-#
-# Configuration options for Ironic driver (Bare Metal).
-# If using the Ironic driver following options must be set:
-# * auth_type
-# * auth_url
-# * project_name
-# * username
-# * password
-# * project_domain_id or project_domain_name
-# * user_domain_id or user_domain_name
-
-#
-# From nova.conf
-#
-
-# DEPRECATED: URL override for the Ironic API endpoint. (uri value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Endpoint lookup uses the service catalog via common keystoneauth1
-# Adapter configuration options. In the current release, api_endpoint will
-# override this behavior, but will be ignored and/or removed in a future
-# release. To achieve the same result, use the endpoint_override option instead.
-#api_endpoint = http://ironic.example.org:6385/
-
-#
-# The number of times to retry when a request conflicts.
-# If set to 0, only try once, no retries.
-#
-# Related options:
-#
-# * api_retry_interval
-#  (integer value)
-# Minimum value: 0
-#api_max_retries = 60
-
-#
-# The number of seconds to wait before retrying the request.
-#
-# Related options:
-#
-# * api_max_retries
-#  (integer value)
-# Minimum value: 0
-#api_retry_interval = 2
-
-# Timeout (seconds) to wait for node serial console state changed. Set to 0 to
-# disable timeout. (integer value)
-# Minimum value: 0
-#serial_console_state_timeout = 10
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [ironic]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-# Authentication URL (string value)
-#auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
-
-# User ID (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [ironic]/user_name
-#username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# The default service_type for endpoint URL discovery. (string value)
-#service_type = baremetal
-
-# The default service_name for endpoint URL discovery. (string value)
-#service_name = <None>
-
-# List of interfaces, in order of preference, for endpoint URL. (list value)
-#valid_interfaces = internal,public
-
-# The default region_name for endpoint URL discovery. (string value)
-#region_name = <None>
-
-# Always use this endpoint URL for requests for this client. NOTE: The
-# unversioned endpoint should be specified here; to request a particular API
-# version, use the `version`, `min-version`, and/or `max-version` options.
-# (string value)
-# Deprecated group/name - [ironic]/api_endpoint
-#endpoint_override = <None>
 
 
 [key_manager]
@@ -6086,14 +5863,16 @@
 #
 
 # Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users. Unauthenticated
-# clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://172.16.10.36:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -6106,9 +5885,10 @@
 # release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and
-# will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://172.16.10.36:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -6121,8 +5901,8 @@
 # value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with Identity API
-# Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
@@ -6146,10 +5926,11 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P release.
-# (string value)
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
@@ -6159,43 +5940,29 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
+memcached_servers=172.16.10.36:11211
 
 # In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set to
-# -1 to disable caching completely. (integer value)
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
 #token_cache_time = 300
 
 # DEPRECATED: Determines the frequency at which the list of revoked tokens is
 # retrieved from the Identity service (in seconds). A high number of revocation
 # events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in the
-# Ocata release and will be removed in the P release. (integer value)
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every memcached server.
-# (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
 # (Optional) Socket timeout in seconds for communicating with a memcached
@@ -6221,11 +5988,11 @@
 
 # Used to control the use and type of token binding. Can be set to: "disabled"
 # to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it if
-# not. "strict" like "permissive" but if the bind type is unknown the token will
-# be rejected. "required" any form of token binding is needed to be allowed.
-# Finally the name of a binding method that must be present in tokens. (string
-# value)
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
 #enforce_token_bind = permissive
 
 # DEPRECATED: If true, the revocation list will be checked for cached tokens.
@@ -6252,23 +6019,129 @@
 # A choice of roles that must be present in a service token. Service tokens are
 # allowed to request that an expired token can be used and so this check should
 # tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present. For
-# backwards compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens pass that
-# don't pass the service_token_roles check as valid. Setting this true will
-# become the default in a future release and should be enabled if possible.
-# (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = nova
 
 
 [libvirt]
@@ -6392,25 +6265,6 @@
 # * ``virt_type``: Influences what is used as default value here.
 #  (string value)
 #connection_uri =
-
-#
-# Algorithm used to hash the injected password.
-# Note that it must be supported by libc on the compute host
-# _and_ by libc inside *any guest image* that will be booted by this compute
-# host whith requested password injection.
-# In case the specified algorithm is not supported by libc on the compute host,
-# a fallback to DES algorithm will be performed.
-#
-# Related options:
-#
-# * ``inject_password``
-# * ``inject_partition``
-#  (string value)
-# Possible values:
-# SHA-512 - <No description provided>
-# SHA-256 - <No description provided>
-# MD5 - <No description provided>
-#inject_password_algorithm = MD5
 
 #
 # Allow the injection of an admin password for instance only at ``create`` and
@@ -6494,7 +6348,7 @@
 #   single partition image
 #  (integer value)
 # Minimum value: -2
-#inject_partition = -2
+inject_partition = -1
 
 # DEPRECATED:
 # Enable a mouse cursor within a graphical VNC or SPICE sessions.
@@ -7075,7 +6929,6 @@
 #
 # * virt.use_cow_images
 # * images_volume_group
-# * [workarounds]/ensure_libvirt_rbd_instance_dir_cleanup
 #  (string value)
 # Possible values:
 # raw - <No description provided>
@@ -7191,41 +7044,6 @@
 #  (integer value)
 # Minimum value: 0
 #volume_clear_size = 0
-
-#
-# What I/O schedule class and priority level should be used when clearing
-# a volume. Only takes effect if ``volume_clear`` option is set to ``zero`` or
-# ``shred``. For more info about classes and priorities, check ``man ionice``.
-#
-# Possible values:
-#
-# * idle - use the Idle scheduling class. This option impacts system performance
-#   the least with a downside of increased time for volume clearance
-# * from 0 to 7 - use the Best-effort scheduling class and set the priority
-# level
-#   to the specified number
-#
-# If not set - do not set I/O scheduling class explicitly. Usually, it's the
-# most
-# aggressive option in terms of system performance impact.
-#
-# Related options:
-#
-# * images_type - must be set to ``lvm``
-# * volume_clear - must be set and the value must be different than ``none``
-#   for this option to have any impact
-#  (string value)
-# Possible values:
-# idle - <No description provided>
-# 0 - <No description provided>
-# 1 - <No description provided>
-# 2 - <No description provided>
-# 3 - <No description provided>
-# 4 - <No description provided>
-# 5 - <No description provided>
-# 6 - <No description provided>
-# 7 - <No description provided>
-#volume_clear_ionice_level = <None>
 
 #
 # Enable snapshot compression for ``qcow2`` images.
@@ -7820,7 +7638,7 @@
 #
 # * metadata_proxy_shared_secret
 #  (boolean value)
-#service_metadata_proxy = false
+service_metadata_proxy = true
 
 #
 # This option holds the shared secret string used to validate proxy requests to
@@ -7831,7 +7649,7 @@
 #
 # * service_metadata_proxy
 #  (string value)
-#metadata_proxy_shared_secret =
+metadata_proxy_shared_secret = opnfv_secret
 
 # PEM encoded Certificate Authority to use when verifying HTTPs connections.
 # (string value)
@@ -7847,7 +7665,7 @@
 #insecure = false
 
 # Timeout value for http requests (integer value)
-#timeout = <None>
+timeout = 300
 
 # Collect per-API call timing information. (boolean value)
 #collect_timing = false
@@ -7857,13 +7675,13 @@
 
 # Authentication type to load (string value)
 # Deprecated group/name - [neutron]/auth_plugin
-#auth_type = <None>
+auth_type = v3password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
 # Authentication URL (string value)
-#auth_url = <None>
+auth_url = http://172.16.10.36:35357/v3
 
 # Scope for system operations (string value)
 #system_scope = <None>
@@ -7884,7 +7702,7 @@
 #project_domain_id = <None>
 
 # Domain name containing project (string value)
-#project_domain_name = <None>
+project_domain_name = Default
 
 # Trust ID (string value)
 #trust_id = <None>
@@ -7910,7 +7728,7 @@
 #user_domain_id = <None>
 
 # User's domain name (string value)
-#user_domain_name = <None>
+user_domain_name = Default
 
 # User's password (string value)
 #password = <None>
@@ -7938,6 +7756,11 @@
 # version, use the `version`, `min-version`, and/or `max-version` options.
 # (string value)
 #endpoint_override = <None>
+
+password = opnfv_secret
+project_name = service
+username = neutron
+region_name = RegionOne
 
 
 [notifications]
@@ -7974,6 +7797,7 @@
 # vm_state - <No description provided>
 # vm_and_task_state - <No description provided>
 #notify_on_state_change = <None>
+notify_on_state_change = vm_and_task_state
 
 # Default notification level for outgoing notifications. (string value)
 # Possible values:
@@ -8076,296 +7900,16 @@
 #lock_path = <None>
 
 
-[oslo_messaging_amqp]
-
+[oslo_messaging_notifications]
 #
 # From oslo.messaging
 #
 
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
-# value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-robin
-# fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point
-# value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are messaging,
-# messagingv2, routing, log, test, noop (multi valued)
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
+driver = messagingv2
 
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
@@ -8381,10 +7925,7 @@
 # to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
 # (integer value)
 #retry = -1
-
-
 [oslo_messaging_rabbit]
-
 #
 # From oslo.messaging
 #
@@ -8401,24 +7942,6 @@
 # Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
 #ssl = false
 
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
 #kombu_reconnect_delay = 1.0
@@ -8433,8 +7956,8 @@
 #kombu_missing_consumer_retry_timeout = 60
 
 # Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than one
-# RabbitMQ node is provided in config. (string value)
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
 # Possible values:
 # round-robin - <No description provided>
 # shuffle - <No description provided>
@@ -8447,7 +7970,8 @@
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_host = localhost
 
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
 # Minimum value: 0
 # Maximum value: 65535
 # This option is deprecated for removal.
@@ -8505,20 +8029,20 @@
 
 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
 # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue. If
-# you just want to make sure that all queues (except those with auto-generated
-# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
-# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
 #rabbit_ha_queues = false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically deleted.
-# The parameter affects only reply and fanout queues. (integer value)
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
 # Minimum value: 1
 #rabbit_transient_queues_ttl = 1800
 
-# Specifies the number of messages to prefetch. Setting to zero allows unlimited
-# messages. (integer value)
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
 #rabbit_qos_prefetch_count = 0
 
 # Number of seconds after which the Rabbit broker is considered down if
@@ -8526,163 +8050,16 @@
 # value)
 #heartbeat_timeout_threshold = 60
 
-# How often times during the heartbeat_timeout_threshold we check the heartbeat.
-# (integer value)
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
 #heartbeat_rate = 2
 
 
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
+
+[oslo_policy]
 
 
 [oslo_middleware]
-
 #
 # From oslo.middleware
 #
@@ -8693,8 +8070,8 @@
 #max_request_body_size = 114688
 
 # DEPRECATED: The HTTP Header that will be used to determine what the original
-# request protocol scheme was, even if it was hidden by a SSL termination proxy.
-# (string value)
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #secure_proxy_ssl_header = X-Forwarded-Proto
@@ -8702,53 +8079,8 @@
 # Whether the application is behind a proxy or not. This determines if the
 # middleware should parse the headers or not. (boolean value)
 #enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
+enable_proxy_headers_parsing = True
+
 
 
 [pci]
@@ -8880,7 +8212,6 @@
 
 
 [placement]
-os_region_name = openstack
 
 #
 # From nova.conf
@@ -8918,61 +8249,42 @@
 #  (string value)
 #incomplete_consumer_user_id = 00000000-0000-0000-0000-000000000000
 
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# List of interfaces, in order of preference, for endpoint URL. (list value)
+valid_interfaces = internal
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [placement]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
@@ -8984,45 +8296,65 @@
 # (string value)
 #default_domain_name = <None>
 
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
 # User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [placement]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Tenant ID (string value)
-#tenant_id = <None>
-
-# Tenant Name (string value)
-#tenant_name = <None>
-
-# The default service_type for endpoint URL discovery. (string value)
-#service_type = placement
-
-# The default service_name for endpoint URL discovery. (string value)
-#service_name = <None>
-
-# List of interfaces, in order of preference, for endpoint URL. (list value)
-#valid_interfaces = internal,public
-
-# The default region_name for endpoint URL discovery. (string value)
-#region_name = <None>
-
-# Always use this endpoint URL for requests for this client. NOTE: The
-# unversioned endpoint should be specified here; to request a particular API
-# version, use the `version`, `min-version`, and/or `max-version` options.
-# (string value)
-#endpoint_override = <None>
+username = nova
 
 
 [placement_database]
@@ -9940,62 +9272,41 @@
 # middleware.
 #  (boolean value)
 #send_service_user_token = false
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+send_service_user_token = True
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_user]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
+auth_url = http://172.16.10.36:5000
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
@@ -10007,27 +9318,65 @@
 # (string value)
 #default_domain_name = <None>
 
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
 # User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [service_user]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Tenant ID (string value)
-#tenant_id = <None>
-
-# Tenant Name (string value)
-#tenant_name = <None>
+username = nova
 
 
 [spice]
@@ -10098,6 +9447,7 @@
 #   and port where the ``nova-spicehtml5proxy`` service is listening.
 #  (uri value)
 #html5proxy_base_url = http://127.0.0.1:6082/spice_auto.html
+html5proxy_base_url = http://10.16.0.107:6080/spice_auto.html
 
 #
 # The  address where the SPICE server running on the instances should listen.
@@ -10366,15 +9716,6 @@
 # root token for vault (string value)
 #root_token_id = <None>
 
-# AppRole role_id for authentication with vault (string value)
-#approle_role_id = <None>
-
-# AppRole secret_id for authentication with vault (string value)
-#approle_secret_id = <None>
-
-# Mountpoint of KV store in Vault to use, for example: secret (string value)
-#kv_mountpoint = secret
-
 # Use this endpoint to connect to Vault, for example: "http://127.0.0.1:8200"
 # (string value)
 #vault_url = http://127.0.0.1:8200
@@ -10482,287 +9823,6 @@
 
 # Tenant Name (string value)
 #tenant_name = <None>
-
-
-[vmware]
-#
-# Related options:
-# Following options must be set in order to launch VMware-based
-# virtual machines.
-#
-# * compute_driver: Must use vmwareapi.VMwareVCDriver.
-# * vmware.host_username
-# * vmware.host_password
-# * vmware.cluster_name
-
-#
-# From nova.conf
-#
-
-#
-# This option specifies the physical ethernet adapter name for VLAN
-# networking.
-#
-# Set the vlan_interface configuration option to match the ESX host
-# interface that handles VLAN-tagged VM traffic.
-#
-# Possible values:
-#
-# * Any valid string representing VLAN interface name
-#  (string value)
-#vlan_interface = vmnic0
-
-#
-# This option should be configured only when using the NSX-MH Neutron
-# plugin. This is the name of the integration bridge on the ESXi server
-# or host. This should not be set for any other Neutron plugin. Hence
-# the default value is not set.
-#
-# Possible values:
-#
-# * Any valid string representing the name of the integration bridge
-#  (string value)
-#integration_bridge = <None>
-
-#
-# Set this value if affected by an increased network latency causing
-# repeated characters when typing in a remote console.
-#  (integer value)
-# Minimum value: 0
-#console_delay_seconds = <None>
-
-#
-# Identifies the remote system where the serial port traffic will
-# be sent.
-#
-# This option adds a virtual serial port which sends console output to
-# a configurable service URI. At the service URI address there will be
-# virtual serial port concentrator that will collect console logs.
-# If this is not set, no serial ports will be added to the created VMs.
-#
-# Possible values:
-#
-# * Any valid URI
-#  (string value)
-#serial_port_service_uri = <None>
-
-#
-# Identifies a proxy service that provides network access to the
-# serial_port_service_uri.
-#
-# Possible values:
-#
-# * Any valid URI (The scheme is 'telnet' or 'telnets'.)
-#
-# Related options:
-# This option is ignored if serial_port_service_uri is not specified.
-# * serial_port_service_uri
-#  (uri value)
-#serial_port_proxy_uri = <None>
-
-#
-# Specifies the directory where the Virtual Serial Port Concentrator is
-# storing console log files. It should match the 'serial_log_dir' config
-# value of VSPC.
-#  (string value)
-#serial_log_dir = /opt/vmware/vspc
-
-#
-# Hostname or IP address for connection to VMware vCenter host. (host address
-# value)
-#host_ip = <None>
-
-# Port for connection to VMware vCenter host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#host_port = 443
-
-# Username for connection to VMware vCenter host. (string value)
-#host_username = <None>
-
-# Password for connection to VMware vCenter host. (string value)
-#host_password = <None>
-
-#
-# Specifies the CA bundle file to be used in verifying the vCenter
-# server certificate.
-#  (string value)
-#ca_file = <None>
-
-#
-# If true, the vCenter server certificate is not verified. If false,
-# then the default CA truststore is used for verification.
-#
-# Related options:
-# * ca_file: This option is ignored if "ca_file" is set.
-#  (boolean value)
-#insecure = false
-
-# Name of a VMware Cluster ComputeResource. (string value)
-#cluster_name = <None>
-
-#
-# Regular expression pattern to match the name of datastore.
-#
-# The datastore_regex setting specifies the datastores to use with
-# Compute. For example, datastore_regex="nas.*" selects all the data
-# stores that have a name starting with "nas".
-#
-# NOTE: If no regex is given, it just picks the datastore with the
-# most freespace.
-#
-# Possible values:
-#
-# * Any matching regular expression to a datastore must be given
-#  (string value)
-#datastore_regex = <None>
-
-#
-# Time interval in seconds to poll remote tasks invoked on
-# VMware VC server.
-#  (floating point value)
-#task_poll_interval = 0.5
-
-#
-# Number of times VMware vCenter server API must be retried on connection
-# failures, e.g. socket error, etc.
-#  (integer value)
-# Minimum value: 0
-#api_retry_count = 10
-
-#
-# This option specifies VNC starting port.
-#
-# Every VM created by ESX host has an option of enabling VNC client
-# for remote connection. Above option 'vnc_port' helps you to set
-# default starting port for the VNC client.
-#
-# Possible values:
-#
-# * Any valid port number within 5900 -(5900 + vnc_port_total)
-#
-# Related options:
-# Below options should be set to enable VNC client.
-# * vnc.enabled = True
-# * vnc_port_total
-#  (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#vnc_port = 5900
-
-#
-# Total number of VNC ports.
-#  (integer value)
-# Minimum value: 0
-#vnc_port_total = 10000
-
-#
-# Keymap for VNC.
-#
-# The keyboard mapping (keymap) determines which keyboard layout a VNC
-# session should use by default.
-#
-# Possible values:
-#
-# * A keyboard layout which is supported by the underlying hypervisor on
-#   this node. This is usually an 'IETF language tag' (for example
-#   'en-us').
-#  (string value)
-#vnc_keymap = en-us
-
-#
-# This option enables/disables the use of linked clone.
-#
-# The ESX hypervisor requires a copy of the VMDK file in order to boot
-# up a virtual machine. The compute driver must download the VMDK via
-# HTTP from the OpenStack Image service to a datastore that is visible
-# to the hypervisor and cache it. Subsequent virtual machines that need
-# the VMDK use the cached version and don't have to copy the file again
-# from the OpenStack Image service.
-#
-# If set to false, even with a cached VMDK, there is still a copy
-# operation from the cache location to the hypervisor file directory
-# in the shared datastore. If set to true, the above copy operation
-# is avoided as it creates copy of the virtual machine that shares
-# virtual disks with its parent VM.
-#  (boolean value)
-#use_linked_clone = true
-
-#
-# This option sets the http connection pool size
-#
-# The connection pool size is the maximum number of connections from nova to
-# vSphere.  It should only be increased if there are warnings indicating that
-# the connection pool is full, otherwise, the default should suffice.
-#  (integer value)
-# Minimum value: 10
-#connection_pool_size = 10
-
-#
-# This option enables or disables storage policy based placement
-# of instances.
-#
-# Related options:
-#
-# * pbm_default_policy
-#  (boolean value)
-#pbm_enabled = false
-
-#
-# This option specifies the PBM service WSDL file location URL.
-#
-# Setting this will disable storage policy based placement
-# of instances.
-#
-# Possible values:
-#
-# * Any valid file path
-#   e.g file:///opt/SDK/spbm/wsdl/pbmService.wsdl
-#  (string value)
-#pbm_wsdl_location = <None>
-
-#
-# This option specifies the default policy to be used.
-#
-# If pbm_enabled is set and there is no defined storage policy for the
-# specific request, then this policy will be used.
-#
-# Possible values:
-#
-# * Any valid storage policy such as VSAN default storage policy
-#
-# Related options:
-#
-# * pbm_enabled
-#  (string value)
-#pbm_default_policy = <None>
-
-#
-# This option specifies the limit on the maximum number of objects to
-# return in a single result.
-#
-# A positive value will cause the operation to suspend the retrieval
-# when the count of objects reaches the specified limit. The server may
-# still limit the count to something less than the configured value.
-# Any remaining objects may be retrieved with additional requests.
-#  (integer value)
-# Minimum value: 0
-#maximum_objects = 100
-
-#
-# This option adds a prefix to the folder where cached images are stored
-#
-# This is not the full path - just a folder prefix. This should only be
-# used when a datastore cache is shared between compute nodes.
-#
-# Note: This should only be used when the compute nodes are running on same
-# host or they have a shared file system.
-#
-# Possible values:
-#
-# * Any string representing the cache prefix to the folder
-#  (string value)
-#cache_prefix = <None>
 
 
 [vnc]
@@ -10806,7 +9866,7 @@
 # keyboards. You should instead use a VNC client that supports Extended Key
 # Event
 # messages, such as noVNC 1.0.0. Refer to bug #1682020 for more information.
-#keymap = <None>
+keymap = en-us
 
 #
 # The IP address or hostname on which an instance should listen to for
@@ -10814,20 +9874,7 @@
 #  (host address value)
 # Deprecated group/name - [DEFAULT]/vncserver_listen
 # Deprecated group/name - [vnc]/vncserver_listen
-#server_listen = 127.0.0.1
-
-#
-# Private, internal IP address or hostname of VNC console proxy.
-#
-# The VNC proxy is an OpenStack component that enables compute service
-# users to access their instances through VNC clients.
-#
-# This option sets the private address to which proxy clients, such as
-# ``nova-xvpvncproxy``, should connect to.
-#  (host address value)
-# Deprecated group/name - [DEFAULT]/vncserver_proxyclient_address
-# Deprecated group/name - [vnc]/vncserver_proxyclient_address
-#server_proxyclient_address = 127.0.0.1
+server_listen = 0.0.0.0
 
 #
 # Public address of noVNC VNC console proxy.
@@ -10848,7 +9895,7 @@
 # * novncproxy_host
 # * novncproxy_port
 #  (uri value)
-#novncproxy_base_url = http://127.0.0.1:6080/vnc_auto.html
+novncproxy_base_url = http://10.16.0.107:6080/vnc_auto.html
 
 #
 # IP address or hostname that the XVP VNC console proxy should bind to.
@@ -10925,7 +9972,7 @@
 # * novncproxy_port
 # * novncproxy_base_url
 #  (string value)
-#novncproxy_host = 0.0.0.0
+novncproxy_host = 0.0.0.0
 
 #
 # Port that the noVNC console proxy should bind to.
@@ -10944,64 +9991,7 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#novncproxy_port = 6080
-
-#
-# The authentication schemes to use with the compute node.
-#
-# Control what RFB authentication schemes are permitted for connections between
-# the proxy and the compute host. If multiple schemes are enabled, the first
-# matching scheme will be used, thus the strongest schemes should be listed
-# first.
-#
-# Possible values:
-#
-# * ``none``: allow connection without authentication
-# * ``vencrypt``: use VeNCrypt authentication scheme
-#
-# Related options:
-#
-# * ``[vnc]vencrypt_client_key``, ``[vnc]vencrypt_client_cert``: must also be
-# set
-#  (list value)
-#auth_schemes = none
-
-# The path to the client certificate PEM file (for x509)
-#
-# The fully qualified path to a PEM file containing the private key which the
-# VNC
-# proxy server presents to the compute node during VNC authentication.
-#
-# Related options:
-#
-# * ``vnc.auth_schemes``: must include ``vencrypt``
-# * ``vnc.vencrypt_client_cert``: must also be set
-#  (string value)
-#vencrypt_client_key = <None>
-
-# The path to the client key file (for x509)
-#
-# The fully qualified path to a PEM file containing the x509 certificate which
-# the VNC proxy server presents to the compute node during VNC authentication.
-#
-# Realted options:
-#
-# * ``vnc.auth_schemes``: must include ``vencrypt``
-# * ``vnc.vencrypt_client_key``: must also be set
-#  (string value)
-#vencrypt_client_cert = <None>
-
-# The path to the CA certificate PEM file
-#
-# The fully qualified path to a PEM file containing one or more x509
-# certificates
-# for the certificate authorities used by the compute node VNC server.
-#
-# Related options:
-#
-# * ``vnc.auth_schemes``: must include ``vencrypt``
-#  (string value)
-#vencrypt_ca_certs = <None>
+novncproxy_port = 6080
 
 
 [workarounds]
@@ -11058,7 +10048,7 @@
 # * False: Live snapshots are always used when snapshotting (as long as
 #   there is a new enough libvirt and the backend storage supports it)
 #  (boolean value)
-#disable_libvirt_livesnapshot = false
+disable_libvirt_livesnapshot = true
 
 #
 # Enable handling of events emitted from compute drivers.
@@ -11184,68 +10174,6 @@
 # See related bug https://bugs.launchpad.net/nova/+bug/1796920 for more details.
 #  (boolean value)
 #report_ironic_standard_resource_class_inventory = true
-
-#
-# Enable live migration of instances with NUMA topologies.
-#
-# Live migration of instances with NUMA topologies is disabled by default
-# when using the libvirt driver. This includes live migration of instances with
-# CPU pinning or hugepages. CPU pinning and huge page information for such
-# instances is not currently re-calculated, as noted in `bug #1289064`_.  This
-# means that if instances were already present on the destination host, the
-# migrated instance could be placed on the same dedicated cores as these
-# instances or use hugepages allocated for another instance. Alternately, if the
-# host platforms were not homogeneous, the instance could be assigned to
-# non-existent cores or be inadvertently split across host NUMA nodes.
-#
-# Despite these known issues, there may be cases where live migration is
-# necessary. By enabling this option, operators that are aware of the issues and
-# are willing to manually work around them can enable live migration support for
-# these instances.
-#
-# Related options:
-#
-# * ``compute_driver``: Only the libvirt driver is affected.
-#
-# .. _bug #1289064: https://bugs.launchpad.net/nova/+bug/1289064
-#  (boolean value)
-#enable_numa_live_migration = false
-
-#
-# Ensure the instance directory is removed during clean up when using rbd.
-#
-# When enabled this workaround will ensure that the instance directory is always
-# removed during cleanup on hosts using ``[libvirt]/images_type=rbd``. This
-# avoids the following bugs with evacuation and revert resize clean up that lead
-# to the instance directory remaining on the host:
-#
-# https://bugs.launchpad.net/nova/+bug/1414895
-#
-# https://bugs.launchpad.net/nova/+bug/1761062
-#
-# Both of these bugs can then result in ``DestinationDiskExists`` errors being
-# raised if the instances ever attempt to return to the host.
-#
-# .. warning:: Operators will need to ensure that the instance directory itself,
-#   specified by ``[DEFAULT]/instances_path``, is not shared between computes
-#   before enabling this workaround otherwise the console.log, kernels, ramdisks
-#   and any additional files being used by the running instance will be lost.
-#
-# Related options:
-#
-# * ``compute_driver`` (libvirt)
-# * ``[libvirt]/images_type`` (rbd)
-# * ``instances_path``
-#  (boolean value)
-#ensure_libvirt_rbd_instance_dir_cleanup = false
-
-#
-# This value enables validation of aggregate IDs passed in the path. It exists
-# to
-# workaround the fact that MySQL stips letters from the end of string such as
-# '123aa' when trying to convert to integer.
-#  (boolean value)
-#validate_aggregate_ids = false
 
 
 [wsgi]

2019-11-21 06:33:45,237 [salt.state       :1951][INFO    ][28616] Completed state [/etc/nova/nova.conf] at time 06:33:45.237682 duration_in_ms=1154.485
2019-11-21 06:33:45,239 [salt.state       :1780][INFO    ][28616] Running state [nova-manage api_db sync] at time 06:33:45.239285
2019-11-21 06:33:45,239 [salt.state       :1813][INFO    ][28616] Executing state cmd.run for [nova-manage api_db sync]
2019-11-21 06:33:45,242 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command 'nova-manage api_db sync' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:33:52,305 [salt.state       :300 ][INFO    ][28616] {'pid': 32760, 'retcode': 0, 'stderr': '', 'stdout': '2019-11-21 06:33:49.767 302 INFO migrate.versioning.api [-] 0 -> 1... \x1b[00m\n2019-11-21 06:33:49.810 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:49.810 302 INFO migrate.versioning.api [-] 1 -> 2... \x1b[00m\n2019-11-21 06:33:49.861 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:49.861 302 INFO migrate.versioning.api [-] 2 -> 3... \x1b[00m\n2019-11-21 06:33:49.897 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:49.897 302 INFO migrate.versioning.api [-] 3 -> 4... \x1b[00m\n2019-11-21 06:33:49.945 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:49.945 302 INFO migrate.versioning.api [-] 4 -> 5... \x1b[00m\n2019-11-21 06:33:50.049 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.049 302 INFO migrate.versioning.api [-] 5 -> 6... \x1b[00m\n2019-11-21 06:33:50.106 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.107 302 INFO migrate.versioning.api [-] 6 -> 7... \x1b[00m\n2019-11-21 06:33:50.166 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.166 302 INFO migrate.versioning.api [-] 7 -> 8... \x1b[00m\n2019-11-21 06:33:50.172 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.172 302 INFO migrate.versioning.api [-] 8 -> 9... \x1b[00m\n2019-11-21 06:33:50.177 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.177 302 INFO migrate.versioning.api [-] 9 -> 10... \x1b[00m\n2019-11-21 06:33:50.182 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.183 302 INFO migrate.versioning.api [-] 10 -> 11... \x1b[00m\n2019-11-21 06:33:50.188 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.188 302 INFO migrate.versioning.api [-] 11 -> 12... \x1b[00m\n2019-11-21 06:33:50.193 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.193 302 INFO migrate.versioning.api [-] 12 -> 13... \x1b[00m\n2019-11-21 06:33:50.308 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.308 302 INFO migrate.versioning.api [-] 13 -> 14... \x1b[00m\n2019-11-21 06:33:50.334 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.334 302 INFO migrate.versioning.api [-] 14 -> 15... \x1b[00m\n2019-11-21 06:33:50.550 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.550 302 INFO migrate.versioning.api [-] 15 -> 16... \x1b[00m\n2019-11-21 06:33:50.725 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.725 302 INFO migrate.versioning.api [-] 16 -> 17... \x1b[00m\n2019-11-21 06:33:50.817 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.817 302 INFO migrate.versioning.api [-] 17 -> 18... \x1b[00m\n2019-11-21 06:33:50.913 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.913 302 INFO migrate.versioning.api [-] 18 -> 19... \x1b[00m\n2019-11-21 06:33:50.960 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:50.960 302 INFO migrate.versioning.api [-] 19 -> 20... \x1b[00m\n2019-11-21 06:33:51.007 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.007 302 INFO migrate.versioning.api [-] 20 -> 21... \x1b[00m\n2019-11-21 06:33:51.011 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.012 302 INFO migrate.versioning.api [-] 21 -> 22... \x1b[00m\n2019-11-21 06:33:51.016 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.016 302 INFO migrate.versioning.api [-] 22 -> 23... \x1b[00m\n2019-11-21 06:33:51.020 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.020 302 INFO migrate.versioning.api [-] 23 -> 24... \x1b[00m\n2019-11-21 06:33:51.025 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.025 302 INFO migrate.versioning.api [-] 24 -> 25... \x1b[00m\n2019-11-21 06:33:51.029 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.029 302 INFO migrate.versioning.api [-] 25 -> 26... \x1b[00m\n2019-11-21 06:33:51.052 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.052 302 INFO migrate.versioning.api [-] 26 -> 27... \x1b[00m\n2019-11-21 06:33:51.235 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.235 302 INFO migrate.versioning.api [-] 27 -> 28... \x1b[00m\n2019-11-21 06:33:51.281 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.282 302 INFO migrate.versioning.api [-] 28 -> 29... \x1b[00m\n2019-11-21 06:33:51.310 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.310 302 INFO migrate.versioning.api [-] 29 -> 30... \x1b[00m\n2019-11-21 06:33:51.319 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.319 302 INFO migrate.versioning.api [-] 30 -> 31... \x1b[00m\n2019-11-21 06:33:51.324 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.324 302 INFO migrate.versioning.api [-] 31 -> 32... \x1b[00m\n2019-11-21 06:33:51.328 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.328 302 INFO migrate.versioning.api [-] 32 -> 33... \x1b[00m\n2019-11-21 06:33:51.333 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.333 302 INFO migrate.versioning.api [-] 33 -> 34... \x1b[00m\n2019-11-21 06:33:51.337 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.338 302 INFO migrate.versioning.api [-] 34 -> 35... \x1b[00m\n2019-11-21 06:33:51.342 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.342 302 INFO migrate.versioning.api [-] 35 -> 36... \x1b[00m\n2019-11-21 06:33:51.346 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.346 302 INFO migrate.versioning.api [-] 36 -> 37... \x1b[00m\n2019-11-21 06:33:51.351 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.351 302 INFO migrate.versioning.api [-] 37 -> 38... \x1b[00m\n2019-11-21 06:33:51.355 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.355 302 INFO migrate.versioning.api [-] 38 -> 39... \x1b[00m\n2019-11-21 06:33:51.360 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.360 302 INFO migrate.versioning.api [-] 39 -> 40... \x1b[00m\n2019-11-21 06:33:51.367 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.367 302 INFO migrate.versioning.api [-] 40 -> 41... \x1b[00m\n2019-11-21 06:33:51.437 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.437 302 INFO migrate.versioning.api [-] 41 -> 42... \x1b[00m\n2019-11-21 06:33:51.486 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.486 302 INFO migrate.versioning.api [-] 42 -> 43... \x1b[00m\n2019-11-21 06:33:51.524 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.524 302 INFO migrate.versioning.api [-] 43 -> 44... \x1b[00m\n2019-11-21 06:33:51.651 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.651 302 INFO migrate.versioning.api [-] 44 -> 45... \x1b[00m\n2019-11-21 06:33:51.657 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.657 302 INFO migrate.versioning.api [-] 45 -> 46... \x1b[00m\n2019-11-21 06:33:51.662 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.662 302 INFO migrate.versioning.api [-] 46 -> 47... \x1b[00m\n2019-11-21 06:33:51.667 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.667 302 INFO migrate.versioning.api [-] 47 -> 48... \x1b[00m\n2019-11-21 06:33:51.672 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.672 302 INFO migrate.versioning.api [-] 48 -> 49... \x1b[00m\n2019-11-21 06:33:51.677 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.677 302 INFO migrate.versioning.api [-] 49 -> 50... \x1b[00m\n2019-11-21 06:33:51.714 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.715 302 INFO migrate.versioning.api [-] 50 -> 51... \x1b[00m\n2019-11-21 06:33:51.888 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.889 302 INFO migrate.versioning.api [-] 51 -> 52... \x1b[00m\n2019-11-21 06:33:51.938 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.938 302 INFO migrate.versioning.api [-] 52 -> 53... \x1b[00m\n2019-11-21 06:33:51.944 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.944 302 INFO migrate.versioning.api [-] 53 -> 54... \x1b[00m\n2019-11-21 06:33:51.950 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.950 302 INFO migrate.versioning.api [-] 54 -> 55... \x1b[00m\n2019-11-21 06:33:51.956 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.956 302 INFO migrate.versioning.api [-] 55 -> 56... \x1b[00m\n2019-11-21 06:33:51.961 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.961 302 INFO migrate.versioning.api [-] 56 -> 57... \x1b[00m\n2019-11-21 06:33:51.966 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:51.966 302 INFO migrate.versioning.api [-] 57 -> 58... \x1b[00m\n2019-11-21 06:33:52.012 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:52.012 302 INFO migrate.versioning.api [-] 58 -> 59... \x1b[00m\n2019-11-21 06:33:52.069 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:52.069 302 INFO migrate.versioning.api [-] 59 -> 60... \x1b[00m\n2019-11-21 06:33:52.110 302 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:33:52.110 302 INFO migrate.versioning.api [-] 60 -> 61... \x1b[00m\n2019-11-21 06:33:52.164 302 INFO migrate.versioning.api [-] done\x1b[00m'}
2019-11-21 06:33:52,306 [salt.state       :1951][INFO    ][28616] Completed state [nova-manage api_db sync] at time 06:33:52.306205 duration_in_ms=7066.919
2019-11-21 06:33:52,308 [salt.state       :1780][INFO    ][28616] Running state [nova-manage cell_v2 map_cell0] at time 06:33:52.308183
2019-11-21 06:33:52,308 [salt.state       :1813][INFO    ][28616] Executing state cmd.run for [nova-manage cell_v2 map_cell0]
2019-11-21 06:33:52,309 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command 'nova-manage cell_v2 map_cell0' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:33:56,504 [salt.state       :300 ][INFO    ][28616] {'pid': 458, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:33:56,505 [salt.state       :1951][INFO    ][28616] Completed state [nova-manage cell_v2 map_cell0] at time 06:33:56.505139 duration_in_ms=4196.956
2019-11-21 06:33:56,506 [salt.state       :1780][INFO    ][28616] Running state [nova-manage cell_v2 create_cell --name=cell1 --verbose] at time 06:33:56.506831
2019-11-21 06:33:56,507 [salt.state       :1813][INFO    ][28616] Executing state cmd.run for [nova-manage cell_v2 create_cell --name=cell1 --verbose]
2019-11-21 06:33:56,507 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command 'nova-manage cell_v2 list_cells | grep cell1' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:33:56,865 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063356852739
2019-11-21 06:33:56,883 [salt.minion      :1432][INFO    ][561] Starting a new job with PID 561
2019-11-21 06:33:56,898 [salt.minion      :1711][INFO    ][561] Returning information for job: 20191121063356852739
2019-11-21 06:34:01,254 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command 'nova-manage cell_v2 create_cell --name=cell1 --verbose' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:34:05,846 [salt.state       :300 ][INFO    ][28616] {'pid': 640, 'retcode': 0, 'stderr': '', 'stdout': 'f10893a6-686c-4f64-81f7-f164ea34eb7e'}
2019-11-21 06:34:05,847 [salt.state       :1951][INFO    ][28616] Completed state [nova-manage cell_v2 create_cell --name=cell1 --verbose] at time 06:34:05.847419 duration_in_ms=9340.587
2019-11-21 06:34:05,848 [salt.state       :1780][INFO    ][28616] Running state [nova-manage db sync] at time 06:34:05.848570
2019-11-21 06:34:05,848 [salt.state       :1813][INFO    ][28616] Executing state cmd.run for [nova-manage db sync]
2019-11-21 06:34:05,849 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command 'nova-manage db sync' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:34:27,082 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063427072446
2019-11-21 06:34:27,094 [salt.minion      :1432][INFO    ][994] Starting a new job with PID 994
2019-11-21 06:34:27,116 [salt.minion      :1711][INFO    ][994] Returning information for job: 20191121063427072446
2019-11-21 06:34:36,789 [salt.state       :300 ][INFO    ][28616] {'pid': 716, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:165: Warning: (1831, u"Duplicate index \'block_device_mapping_instance_uuid_virtual_name_device_name_idx\' defined on the table \'nova_cell0.block_device_mapping\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)\n/usr/lib/python2.7/dist-packages/pymysql/cursors.py:165: Warning: (1831, u"Duplicate index \'uniq_instances0uuid\' defined on the table \'nova_cell0.instances\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)\n/usr/lib/python2.7/dist-packages/pymysql/cursors.py:165: Warning: (1831, u"Duplicate index \'block_device_mapping_instance_uuid_virtual_name_device_name_idx\' defined on the table \'nova.block_device_mapping\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)\n/usr/lib/python2.7/dist-packages/pymysql/cursors.py:165: Warning: (1831, u"Duplicate index \'uniq_instances0uuid\' defined on the table \'nova.instances\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)', 'stdout': '2019-11-21 06:34:10.217 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 215 -> 216... \x1b[00m\n2019-11-21 06:34:15.462 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.462 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 216 -> 217... \x1b[00m\n2019-11-21 06:34:15.469 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.470 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 217 -> 218... \x1b[00m\n2019-11-21 06:34:15.475 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.476 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 218 -> 219... \x1b[00m\n2019-11-21 06:34:15.481 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.482 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 219 -> 220... \x1b[00m\n2019-11-21 06:34:15.487 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.490 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 220 -> 221... \x1b[00m\n2019-11-21 06:34:15.498 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.499 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 221 -> 222... \x1b[00m\n2019-11-21 06:34:15.505 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.505 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 222 -> 223... \x1b[00m\n2019-11-21 06:34:15.511 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.511 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 223 -> 224... \x1b[00m\n2019-11-21 06:34:15.516 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.517 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 224 -> 225... \x1b[00m\n2019-11-21 06:34:15.522 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.522 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 225 -> 226... \x1b[00m\n2019-11-21 06:34:15.528 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.529 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 226 -> 227... \x1b[00m\n2019-11-21 06:34:15.538 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.539 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 227 -> 228... \x1b[00m\n2019-11-21 06:34:15.627 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.627 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 228 -> 229... \x1b[00m\n2019-11-21 06:34:15.705 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.705 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 229 -> 230... \x1b[00m\n2019-11-21 06:34:15.845 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.845 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 230 -> 231... \x1b[00m\n2019-11-21 06:34:15.977 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:15.977 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 231 -> 232... \x1b[00m\n2019-11-21 06:34:16.395 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.395 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 232 -> 233... \x1b[00m\n2019-11-21 06:34:16.493 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.494 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 233 -> 234... \x1b[00m\n2019-11-21 06:34:16.518 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.518 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 234 -> 235... \x1b[00m\n2019-11-21 06:34:16.523 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.523 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 235 -> 236... \x1b[00m\n2019-11-21 06:34:16.529 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.529 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 236 -> 237... \x1b[00m\n2019-11-21 06:34:16.535 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.535 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 237 -> 238... \x1b[00m\n2019-11-21 06:34:16.541 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.541 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 238 -> 239... \x1b[00m\n2019-11-21 06:34:16.546 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.547 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 239 -> 240... \x1b[00m\n2019-11-21 06:34:16.552 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.552 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 240 -> 241... \x1b[00m\n2019-11-21 06:34:16.557 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.558 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 241 -> 242... \x1b[00m\n2019-11-21 06:34:16.563 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.563 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 242 -> 243... \x1b[00m\n2019-11-21 06:34:16.568 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.569 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 243 -> 244... \x1b[00m\n2019-11-21 06:34:16.583 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.584 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 244 -> 245... \x1b[00m\n2019-11-21 06:34:16.898 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.898 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 245 -> 246... \x1b[00m\n2019-11-21 06:34:16.959 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:16.959 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 246 -> 247... \x1b[00m\n2019-11-21 06:34:17.195 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.195 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 247 -> 248... \x1b[00m\n2019-11-21 06:34:17.203 722 INFO 248_add_expire_reservations_index [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] Skipped adding reservations_deleted_expire_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:34:17.208 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.208 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 248 -> 249... \x1b[00m\n2019-11-21 06:34:17.232 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.233 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 249 -> 250... \x1b[00m\n2019-11-21 06:34:17.275 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.275 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 250 -> 251... \x1b[00m\n2019-11-21 06:34:17.355 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.355 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 251 -> 252... \x1b[00m\n2019-11-21 06:34:17.481 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.482 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 252 -> 253... \x1b[00m\n2019-11-21 06:34:17.559 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.559 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 253 -> 254... \x1b[00m\n2019-11-21 06:34:17.637 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.638 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 254 -> 255... \x1b[00m\n2019-11-21 06:34:17.644 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.645 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 255 -> 256... \x1b[00m\n2019-11-21 06:34:17.650 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.651 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 256 -> 257... \x1b[00m\n2019-11-21 06:34:17.656 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.656 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 257 -> 258... \x1b[00m\n2019-11-21 06:34:17.662 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.662 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 258 -> 259... \x1b[00m\n2019-11-21 06:34:17.672 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.672 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 259 -> 260... \x1b[00m\n2019-11-21 06:34:17.677 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.678 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 260 -> 261... \x1b[00m\n2019-11-21 06:34:17.683 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.683 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 261 -> 262... \x1b[00m\n2019-11-21 06:34:17.688 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.689 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 262 -> 263... \x1b[00m\n2019-11-21 06:34:17.694 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.694 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 263 -> 264... \x1b[00m\n2019-11-21 06:34:17.700 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.700 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 264 -> 265... \x1b[00m\n2019-11-21 06:34:17.749 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.750 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 265 -> 266... \x1b[00m\n2019-11-21 06:34:17.773 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:17.773 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 266 -> 267... \x1b[00m\n2019-11-21 06:34:18.342 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:18.342 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 267 -> 268... \x1b[00m\n2019-11-21 06:34:18.458 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:18.459 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 268 -> 269... \x1b[00m\n2019-11-21 06:34:18.559 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:18.559 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 269 -> 270... \x1b[00m\n2019-11-21 06:34:18.655 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:18.655 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 270 -> 271... \x1b[00m\n2019-11-21 06:34:18.742 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:18.742 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 271 -> 272... \x1b[00m\n2019-11-21 06:34:18.752 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:18.753 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 272 -> 273... \x1b[00m\n2019-11-21 06:34:18.763 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:18.764 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 273 -> 274... \x1b[00m\n2019-11-21 06:34:18.821 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:18.822 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 274 -> 275... \x1b[00m\n2019-11-21 06:34:18.898 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:18.898 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 275 -> 276... \x1b[00m\n2019-11-21 06:34:18.983 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:18.984 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 276 -> 277... \x1b[00m\n2019-11-21 06:34:19.014 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.015 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 277 -> 278... \x1b[00m\n2019-11-21 06:34:19.108 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.109 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 278 -> 279... \x1b[00m\n2019-11-21 06:34:19.132 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.133 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 279 -> 280... \x1b[00m\n2019-11-21 06:34:19.206 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.206 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 280 -> 281... \x1b[00m\n2019-11-21 06:34:19.212 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.213 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 281 -> 282... \x1b[00m\n2019-11-21 06:34:19.219 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.219 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 282 -> 283... \x1b[00m\n2019-11-21 06:34:19.224 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.224 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 283 -> 284... \x1b[00m\n2019-11-21 06:34:19.229 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.230 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 284 -> 285... \x1b[00m\n2019-11-21 06:34:19.234 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.235 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 285 -> 286... \x1b[00m\n2019-11-21 06:34:19.240 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.240 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 286 -> 287... \x1b[00m\n2019-11-21 06:34:19.246 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.246 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 287 -> 288... \x1b[00m\n2019-11-21 06:34:19.252 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.252 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 288 -> 289... \x1b[00m\n2019-11-21 06:34:19.258 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.258 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 289 -> 290... \x1b[00m\n2019-11-21 06:34:19.264 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.264 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 290 -> 291... \x1b[00m\n2019-11-21 06:34:19.283 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.284 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 291 -> 292... \x1b[00m\n2019-11-21 06:34:19.370 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.371 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 292 -> 293... \x1b[00m\n2019-11-21 06:34:19.538 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.538 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 293 -> 294... \x1b[00m\n2019-11-21 06:34:19.615 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.615 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 294 -> 295... \x1b[00m\n2019-11-21 06:34:19.642 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.642 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 295 -> 296... \x1b[00m\n2019-11-21 06:34:19.649 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.649 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 296 -> 297... \x1b[00m\n2019-11-21 06:34:19.737 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.738 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 297 -> 298... \x1b[00m\n2019-11-21 06:34:19.781 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.781 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 298 -> 299... \x1b[00m\n2019-11-21 06:34:19.887 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.888 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 299 -> 300... \x1b[00m\n2019-11-21 06:34:19.982 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:19.983 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 300 -> 301... \x1b[00m\n2019-11-21 06:34:20.133 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.133 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 301 -> 302... \x1b[00m\n2019-11-21 06:34:20.139 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.139 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 302 -> 303... \x1b[00m\n2019-11-21 06:34:20.144 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.145 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 303 -> 304... \x1b[00m\n2019-11-21 06:34:20.150 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.150 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 304 -> 305... \x1b[00m\n2019-11-21 06:34:20.155 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.155 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 305 -> 306... \x1b[00m\n2019-11-21 06:34:20.161 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.161 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 306 -> 307... \x1b[00m\n2019-11-21 06:34:20.166 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.166 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 307 -> 308... \x1b[00m\n2019-11-21 06:34:20.171 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.172 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 308 -> 309... \x1b[00m\n2019-11-21 06:34:20.177 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.177 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 309 -> 310... \x1b[00m\n2019-11-21 06:34:20.182 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.183 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 310 -> 311... \x1b[00m\n2019-11-21 06:34:20.187 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.188 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 311 -> 312... \x1b[00m\n2019-11-21 06:34:20.193 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.193 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 312 -> 313... \x1b[00m\n2019-11-21 06:34:20.287 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.287 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 313 -> 314... \x1b[00m\n2019-11-21 06:34:20.491 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.492 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 314 -> 315... \x1b[00m\n2019-11-21 06:34:20.911 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.911 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 315 -> 316... \x1b[00m\n2019-11-21 06:34:20.994 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:20.994 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 316 -> 317... \x1b[00m\n2019-11-21 06:34:21.071 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.072 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 317 -> 318... \x1b[00m\n2019-11-21 06:34:21.349 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.350 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 318 -> 319... \x1b[00m\n2019-11-21 06:34:21.373 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.373 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 319 -> 320... \x1b[00m\n2019-11-21 06:34:21.379 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.379 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 320 -> 321... \x1b[00m\n2019-11-21 06:34:21.388 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.388 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 321 -> 322... \x1b[00m\n2019-11-21 06:34:21.394 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.394 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 322 -> 323... \x1b[00m\n2019-11-21 06:34:21.400 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.400 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 323 -> 324... \x1b[00m\n2019-11-21 06:34:21.408 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.408 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 324 -> 325... \x1b[00m\n2019-11-21 06:34:21.414 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.414 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 325 -> 326... \x1b[00m\n2019-11-21 06:34:21.420 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.420 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 326 -> 327... \x1b[00m\n2019-11-21 06:34:21.425 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.425 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 327 -> 328... \x1b[00m\n2019-11-21 06:34:21.430 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.430 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 328 -> 329... \x1b[00m\n2019-11-21 06:34:21.435 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.435 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 329 -> 330... \x1b[00m\n2019-11-21 06:34:21.463 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.463 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 330 -> 331... \x1b[00m\n2019-11-21 06:34:21.630 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.631 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 331 -> 332... \x1b[00m\n2019-11-21 06:34:21.713 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.713 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 332 -> 333... \x1b[00m\n2019-11-21 06:34:21.771 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.771 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 333 -> 334... \x1b[00m\n2019-11-21 06:34:21.847 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.847 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 334 -> 335... \x1b[00m\n2019-11-21 06:34:21.853 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.853 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 335 -> 336... \x1b[00m\n2019-11-21 06:34:21.858 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.859 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 336 -> 337... \x1b[00m\n2019-11-21 06:34:21.863 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.864 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 337 -> 338... \x1b[00m\n2019-11-21 06:34:21.869 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.869 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 338 -> 339... \x1b[00m\n2019-11-21 06:34:21.874 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.875 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 339 -> 340... \x1b[00m\n2019-11-21 06:34:21.880 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.880 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 340 -> 341... \x1b[00m\n2019-11-21 06:34:21.885 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.885 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 341 -> 342... \x1b[00m\n2019-11-21 06:34:21.891 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.891 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 342 -> 343... \x1b[00m\n2019-11-21 06:34:21.896 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.896 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 343 -> 344... \x1b[00m\n2019-11-21 06:34:21.901 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.902 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 344 -> 345... \x1b[00m\n2019-11-21 06:34:21.926 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:21.927 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 345 -> 346... \x1b[00m\n2019-11-21 06:34:22.023 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.023 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 346 -> 347... \x1b[00m\n2019-11-21 06:34:22.075 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.076 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 347 -> 348... \x1b[00m\n2019-11-21 06:34:22.081 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.081 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 348 -> 349... \x1b[00m\n2019-11-21 06:34:22.086 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.086 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 349 -> 350... \x1b[00m\n2019-11-21 06:34:22.092 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.093 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 350 -> 351... \x1b[00m\n2019-11-21 06:34:22.098 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.098 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 351 -> 352... \x1b[00m\n2019-11-21 06:34:22.103 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.103 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 352 -> 353... \x1b[00m\n2019-11-21 06:34:22.109 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.109 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 353 -> 354... \x1b[00m\n2019-11-21 06:34:22.114 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.115 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 354 -> 355... \x1b[00m\n2019-11-21 06:34:22.122 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.122 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 355 -> 356... \x1b[00m\n2019-11-21 06:34:22.129 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.129 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 356 -> 357... \x1b[00m\n2019-11-21 06:34:22.136 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.136 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 357 -> 358... \x1b[00m\n2019-11-21 06:34:22.243 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.243 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 358 -> 359... \x1b[00m\n2019-11-21 06:34:22.329 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.330 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 359 -> 360... \x1b[00m\n2019-11-21 06:34:22.441 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.442 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 360 -> 361... \x1b[00m\n2019-11-21 06:34:22.462 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.462 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 361 -> 362... \x1b[00m\n2019-11-21 06:34:22.541 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.541 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 362 -> 363... \x1b[00m\n2019-11-21 06:34:22.546 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.547 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 363 -> 364... \x1b[00m\n2019-11-21 06:34:22.552 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.552 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 364 -> 365... \x1b[00m\n2019-11-21 06:34:22.557 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.557 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 365 -> 366... \x1b[00m\n2019-11-21 06:34:22.562 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.563 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 366 -> 367... \x1b[00m\n2019-11-21 06:34:22.567 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.568 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 367 -> 368... \x1b[00m\n2019-11-21 06:34:22.573 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.573 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 368 -> 369... \x1b[00m\n2019-11-21 06:34:22.578 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.578 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 369 -> 370... \x1b[00m\n2019-11-21 06:34:22.584 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.584 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 370 -> 371... \x1b[00m\n2019-11-21 06:34:22.590 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.590 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 371 -> 372... \x1b[00m\n2019-11-21 06:34:22.595 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.595 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 372 -> 373... \x1b[00m\n2019-11-21 06:34:22.693 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.693 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 373 -> 374... \x1b[00m\n2019-11-21 06:34:22.792 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.793 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 374 -> 375... \x1b[00m\n2019-11-21 06:34:22.829 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.830 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 375 -> 376... \x1b[00m\n2019-11-21 06:34:22.855 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.855 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 376 -> 377... \x1b[00m\n2019-11-21 06:34:22.886 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.886 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 377 -> 378... \x1b[00m\n2019-11-21 06:34:22.919 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.919 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 378 -> 379... \x1b[00m\n2019-11-21 06:34:22.926 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.926 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 379 -> 380... \x1b[00m\n2019-11-21 06:34:22.933 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.933 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 380 -> 381... \x1b[00m\n2019-11-21 06:34:22.939 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.940 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 381 -> 382... \x1b[00m\n2019-11-21 06:34:22.946 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.947 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 382 -> 383... \x1b[00m\n2019-11-21 06:34:22.954 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.955 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 383 -> 384... \x1b[00m\n2019-11-21 06:34:22.962 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.962 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 384 -> 385... \x1b[00m\n2019-11-21 06:34:22.969 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.969 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 385 -> 386... \x1b[00m\n2019-11-21 06:34:22.975 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.976 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 386 -> 387... \x1b[00m\n2019-11-21 06:34:22.984 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.984 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 387 -> 388... \x1b[00m\n2019-11-21 06:34:22.991 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:22.991 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 388 -> 389... \x1b[00m\n2019-11-21 06:34:23.017 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:23.017 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 389 -> 390... \x1b[00m\n2019-11-21 06:34:23.102 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:23.171 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 215 -> 216... \x1b[00m\n2019-11-21 06:34:28.988 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:28.989 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 216 -> 217... \x1b[00m\n2019-11-21 06:34:28.995 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:28.995 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 217 -> 218... \x1b[00m\n2019-11-21 06:34:29.000 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.001 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 218 -> 219... \x1b[00m\n2019-11-21 06:34:29.006 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.006 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 219 -> 220... \x1b[00m\n2019-11-21 06:34:29.011 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.011 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 220 -> 221... \x1b[00m\n2019-11-21 06:34:29.016 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.016 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 221 -> 222... \x1b[00m\n2019-11-21 06:34:29.021 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.021 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 222 -> 223... \x1b[00m\n2019-11-21 06:34:29.026 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.026 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 223 -> 224... \x1b[00m\n2019-11-21 06:34:29.031 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.031 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 224 -> 225... \x1b[00m\n2019-11-21 06:34:29.036 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.036 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 225 -> 226... \x1b[00m\n2019-11-21 06:34:29.041 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.041 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 226 -> 227... \x1b[00m\n2019-11-21 06:34:29.050 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.050 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 227 -> 228... \x1b[00m\n2019-11-21 06:34:29.141 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.141 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 228 -> 229... \x1b[00m\n2019-11-21 06:34:29.386 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.386 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 229 -> 230... \x1b[00m\n2019-11-21 06:34:29.517 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.517 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 230 -> 231... \x1b[00m\n2019-11-21 06:34:29.642 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.643 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 231 -> 232... \x1b[00m\n2019-11-21 06:34:29.958 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:29.959 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 232 -> 233... \x1b[00m\n2019-11-21 06:34:30.059 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.059 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 233 -> 234... \x1b[00m\n2019-11-21 06:34:30.079 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.079 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 234 -> 235... \x1b[00m\n2019-11-21 06:34:30.085 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.085 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 235 -> 236... \x1b[00m\n2019-11-21 06:34:30.090 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.091 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 236 -> 237... \x1b[00m\n2019-11-21 06:34:30.096 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.096 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 237 -> 238... \x1b[00m\n2019-11-21 06:34:30.101 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.102 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 238 -> 239... \x1b[00m\n2019-11-21 06:34:30.110 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.110 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 239 -> 240... \x1b[00m\n2019-11-21 06:34:30.116 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.117 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 240 -> 241... \x1b[00m\n2019-11-21 06:34:30.127 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.127 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 241 -> 242... \x1b[00m\n2019-11-21 06:34:30.133 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.133 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 242 -> 243... \x1b[00m\n2019-11-21 06:34:30.138 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.138 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 243 -> 244... \x1b[00m\n2019-11-21 06:34:30.156 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.156 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 244 -> 245... \x1b[00m\n2019-11-21 06:34:30.505 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.506 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 245 -> 246... \x1b[00m\n2019-11-21 06:34:30.578 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.578 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 246 -> 247... \x1b[00m\n2019-11-21 06:34:30.762 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.763 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 247 -> 248... \x1b[00m\n2019-11-21 06:34:30.773 722 INFO 248_add_expire_reservations_index [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] Skipped adding reservations_deleted_expire_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:34:30.779 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.779 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 248 -> 249... \x1b[00m\n2019-11-21 06:34:30.808 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.809 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 249 -> 250... \x1b[00m\n2019-11-21 06:34:30.834 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.835 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 250 -> 251... \x1b[00m\n2019-11-21 06:34:30.911 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:30.911 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 251 -> 252... \x1b[00m\n2019-11-21 06:34:31.044 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.044 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 252 -> 253... \x1b[00m\n2019-11-21 06:34:31.128 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.128 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 253 -> 254... \x1b[00m\n2019-11-21 06:34:31.207 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.208 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 254 -> 255... \x1b[00m\n2019-11-21 06:34:31.212 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.213 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 255 -> 256... \x1b[00m\n2019-11-21 06:34:31.218 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.218 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 256 -> 257... \x1b[00m\n2019-11-21 06:34:31.223 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.223 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 257 -> 258... \x1b[00m\n2019-11-21 06:34:31.228 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.229 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 258 -> 259... \x1b[00m\n2019-11-21 06:34:31.234 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.234 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 259 -> 260... \x1b[00m\n2019-11-21 06:34:31.240 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.240 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 260 -> 261... \x1b[00m\n2019-11-21 06:34:31.248 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.248 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 261 -> 262... \x1b[00m\n2019-11-21 06:34:31.256 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.257 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 262 -> 263... \x1b[00m\n2019-11-21 06:34:31.264 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.265 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 263 -> 264... \x1b[00m\n2019-11-21 06:34:31.273 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.273 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 264 -> 265... \x1b[00m\n2019-11-21 06:34:31.310 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.311 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 265 -> 266... \x1b[00m\n2019-11-21 06:34:31.354 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.354 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 266 -> 267... \x1b[00m\n2019-11-21 06:34:31.783 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.783 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 267 -> 268... \x1b[00m\n2019-11-21 06:34:31.871 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.871 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 268 -> 269... \x1b[00m\n2019-11-21 06:34:31.954 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:31.955 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 269 -> 270... \x1b[00m\n2019-11-21 06:34:32.039 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.040 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 270 -> 271... \x1b[00m\n2019-11-21 06:34:32.130 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.130 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 271 -> 272... \x1b[00m\n2019-11-21 06:34:32.135 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.135 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 272 -> 273... \x1b[00m\n2019-11-21 06:34:32.140 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.141 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 273 -> 274... \x1b[00m\n2019-11-21 06:34:32.183 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.183 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 274 -> 275... \x1b[00m\n2019-11-21 06:34:32.258 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.258 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 275 -> 276... \x1b[00m\n2019-11-21 06:34:32.340 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.340 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 276 -> 277... \x1b[00m\n2019-11-21 06:34:32.381 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.382 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 277 -> 278... \x1b[00m\n2019-11-21 06:34:32.480 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.480 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 278 -> 279... \x1b[00m\n2019-11-21 06:34:32.507 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.507 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 279 -> 280... \x1b[00m\n2019-11-21 06:34:32.565 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.566 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 280 -> 281... \x1b[00m\n2019-11-21 06:34:32.571 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.571 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 281 -> 282... \x1b[00m\n2019-11-21 06:34:32.577 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.577 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 282 -> 283... \x1b[00m\n2019-11-21 06:34:32.582 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.582 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 283 -> 284... \x1b[00m\n2019-11-21 06:34:32.586 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.587 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 284 -> 285... \x1b[00m\n2019-11-21 06:34:32.591 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.591 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 285 -> 286... \x1b[00m\n2019-11-21 06:34:32.596 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.596 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 286 -> 287... \x1b[00m\n2019-11-21 06:34:32.601 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.601 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 287 -> 288... \x1b[00m\n2019-11-21 06:34:32.605 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.606 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 288 -> 289... \x1b[00m\n2019-11-21 06:34:32.610 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.611 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 289 -> 290... \x1b[00m\n2019-11-21 06:34:32.616 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.616 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 290 -> 291... \x1b[00m\n2019-11-21 06:34:32.641 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.642 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 291 -> 292... \x1b[00m\n2019-11-21 06:34:32.741 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.741 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 292 -> 293... \x1b[00m\n2019-11-21 06:34:32.889 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.890 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 293 -> 294... \x1b[00m\n2019-11-21 06:34:32.958 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.958 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 294 -> 295... \x1b[00m\n2019-11-21 06:34:32.982 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.982 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 295 -> 296... \x1b[00m\n2019-11-21 06:34:32.986 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:32.987 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 296 -> 297... \x1b[00m\n2019-11-21 06:34:33.076 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.076 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 297 -> 298... \x1b[00m\n2019-11-21 06:34:33.130 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.130 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 298 -> 299... \x1b[00m\n2019-11-21 06:34:33.206 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.206 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 299 -> 300... \x1b[00m\n2019-11-21 06:34:33.290 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.290 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 300 -> 301... \x1b[00m\n2019-11-21 06:34:33.437 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.437 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 301 -> 302... \x1b[00m\n2019-11-21 06:34:33.445 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.445 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 302 -> 303... \x1b[00m\n2019-11-21 06:34:33.450 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.450 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 303 -> 304... \x1b[00m\n2019-11-21 06:34:33.455 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.455 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 304 -> 305... \x1b[00m\n2019-11-21 06:34:33.460 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.460 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 305 -> 306... \x1b[00m\n2019-11-21 06:34:33.465 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.465 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 306 -> 307... \x1b[00m\n2019-11-21 06:34:33.470 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.470 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 307 -> 308... \x1b[00m\n2019-11-21 06:34:33.475 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.475 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 308 -> 309... \x1b[00m\n2019-11-21 06:34:33.499 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.499 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 309 -> 310... \x1b[00m\n2019-11-21 06:34:33.505 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.505 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 310 -> 311... \x1b[00m\n2019-11-21 06:34:33.510 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.510 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 311 -> 312... \x1b[00m\n2019-11-21 06:34:33.523 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.523 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 312 -> 313... \x1b[00m\n2019-11-21 06:34:33.614 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.615 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 313 -> 314... \x1b[00m\n2019-11-21 06:34:33.820 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:33.821 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 314 -> 315... \x1b[00m\n2019-11-21 06:34:34.279 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.279 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 315 -> 316... \x1b[00m\n2019-11-21 06:34:34.358 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.359 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 316 -> 317... \x1b[00m\n2019-11-21 06:34:34.435 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.435 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 317 -> 318... \x1b[00m\n2019-11-21 06:34:34.754 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.755 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 318 -> 319... \x1b[00m\n2019-11-21 06:34:34.786 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.787 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 319 -> 320... \x1b[00m\n2019-11-21 06:34:34.791 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.791 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 320 -> 321... \x1b[00m\n2019-11-21 06:34:34.796 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.796 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 321 -> 322... \x1b[00m\n2019-11-21 06:34:34.801 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.801 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 322 -> 323... \x1b[00m\n2019-11-21 06:34:34.806 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.806 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 323 -> 324... \x1b[00m\n2019-11-21 06:34:34.811 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.811 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 324 -> 325... \x1b[00m\n2019-11-21 06:34:34.816 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.816 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 325 -> 326... \x1b[00m\n2019-11-21 06:34:34.822 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.822 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 326 -> 327... \x1b[00m\n2019-11-21 06:34:34.827 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.827 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 327 -> 328... \x1b[00m\n2019-11-21 06:34:34.832 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.833 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 328 -> 329... \x1b[00m\n2019-11-21 06:34:34.838 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.838 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 329 -> 330... \x1b[00m\n2019-11-21 06:34:34.863 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:34.864 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 330 -> 331... \x1b[00m\n2019-11-21 06:34:35.053 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.054 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 331 -> 332... \x1b[00m\n2019-11-21 06:34:35.165 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.165 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 332 -> 333... \x1b[00m\n2019-11-21 06:34:35.268 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.268 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 333 -> 334... \x1b[00m\n2019-11-21 06:34:35.367 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.368 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 334 -> 335... \x1b[00m\n2019-11-21 06:34:35.375 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.375 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 335 -> 336... \x1b[00m\n2019-11-21 06:34:35.382 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.382 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 336 -> 337... \x1b[00m\n2019-11-21 06:34:35.390 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.390 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 337 -> 338... \x1b[00m\n2019-11-21 06:34:35.399 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.400 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 338 -> 339... \x1b[00m\n2019-11-21 06:34:35.408 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.408 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 339 -> 340... \x1b[00m\n2019-11-21 06:34:35.416 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.417 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 340 -> 341... \x1b[00m\n2019-11-21 06:34:35.426 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.427 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 341 -> 342... \x1b[00m\n2019-11-21 06:34:35.435 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.436 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 342 -> 343... \x1b[00m\n2019-11-21 06:34:35.444 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.445 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 343 -> 344... \x1b[00m\n2019-11-21 06:34:35.453 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.454 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 344 -> 345... \x1b[00m\n2019-11-21 06:34:35.502 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.503 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 345 -> 346... \x1b[00m\n2019-11-21 06:34:35.626 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.627 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 346 -> 347... \x1b[00m\n2019-11-21 06:34:35.684 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.684 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 347 -> 348... \x1b[00m\n2019-11-21 06:34:35.689 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.689 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 348 -> 349... \x1b[00m\n2019-11-21 06:34:35.694 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.694 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 349 -> 350... \x1b[00m\n2019-11-21 06:34:35.699 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.699 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 350 -> 351... \x1b[00m\n2019-11-21 06:34:35.704 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.704 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 351 -> 352... \x1b[00m\n2019-11-21 06:34:35.713 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.713 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 352 -> 353... \x1b[00m\n2019-11-21 06:34:35.727 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.728 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 353 -> 354... \x1b[00m\n2019-11-21 06:34:35.733 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.733 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 354 -> 355... \x1b[00m\n2019-11-21 06:34:35.738 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.738 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 355 -> 356... \x1b[00m\n2019-11-21 06:34:35.743 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.743 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 356 -> 357... \x1b[00m\n2019-11-21 06:34:35.747 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.748 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 357 -> 358... \x1b[00m\n2019-11-21 06:34:35.829 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.829 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 358 -> 359... \x1b[00m\n2019-11-21 06:34:35.919 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.919 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 359 -> 360... \x1b[00m\n2019-11-21 06:34:35.982 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:35.983 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 360 -> 361... \x1b[00m\n2019-11-21 06:34:36.010 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.010 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 361 -> 362... \x1b[00m\n2019-11-21 06:34:36.088 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.088 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 362 -> 363... \x1b[00m\n2019-11-21 06:34:36.093 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.093 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 363 -> 364... \x1b[00m\n2019-11-21 06:34:36.098 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.098 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 364 -> 365... \x1b[00m\n2019-11-21 06:34:36.102 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.103 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 365 -> 366... \x1b[00m\n2019-11-21 06:34:36.108 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.108 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 366 -> 367... \x1b[00m\n2019-11-21 06:34:36.113 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.113 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 367 -> 368... \x1b[00m\n2019-11-21 06:34:36.118 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.119 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 368 -> 369... \x1b[00m\n2019-11-21 06:34:36.123 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.123 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 369 -> 370... \x1b[00m\n2019-11-21 06:34:36.128 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.128 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 370 -> 371... \x1b[00m\n2019-11-21 06:34:36.133 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.133 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 371 -> 372... \x1b[00m\n2019-11-21 06:34:36.138 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.138 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 372 -> 373... \x1b[00m\n2019-11-21 06:34:36.229 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.229 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 373 -> 374... \x1b[00m\n2019-11-21 06:34:36.324 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.324 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 374 -> 375... \x1b[00m\n2019-11-21 06:34:36.374 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.375 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 375 -> 376... \x1b[00m\n2019-11-21 06:34:36.390 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.390 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 376 -> 377... \x1b[00m\n2019-11-21 06:34:36.418 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.419 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 377 -> 378... \x1b[00m\n2019-11-21 06:34:36.452 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.452 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 378 -> 379... \x1b[00m\n2019-11-21 06:34:36.457 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.457 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 379 -> 380... \x1b[00m\n2019-11-21 06:34:36.461 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.462 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 380 -> 381... \x1b[00m\n2019-11-21 06:34:36.466 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.466 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 381 -> 382... \x1b[00m\n2019-11-21 06:34:36.471 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.471 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 382 -> 383... \x1b[00m\n2019-11-21 06:34:36.476 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.476 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 383 -> 384... \x1b[00m\n2019-11-21 06:34:36.486 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.486 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 384 -> 385... \x1b[00m\n2019-11-21 06:34:36.491 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.491 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 385 -> 386... \x1b[00m\n2019-11-21 06:34:36.496 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.497 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 386 -> 387... \x1b[00m\n2019-11-21 06:34:36.501 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.502 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 387 -> 388... \x1b[00m\n2019-11-21 06:34:36.507 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.507 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 388 -> 389... \x1b[00m\n2019-11-21 06:34:36.526 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m\n2019-11-21 06:34:36.526 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] 389 -> 390... \x1b[00m\n2019-11-21 06:34:36.626 722 INFO migrate.versioning.api [req-4d1df1c5-7d8d-4f76-a78a-9ca311a776f8 - - - - -] done\x1b[00m'}
2019-11-21 06:34:36,802 [salt.state       :1951][INFO    ][28616] Completed state [nova-manage db sync] at time 06:34:36.802373 duration_in_ms=30953.8
2019-11-21 06:34:37,434 [salt.state       :1780][INFO    ][28616] Running state [/etc/nova/api-paste.ini] at time 06:34:37.434569
2019-11-21 06:34:37,434 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/nova/api-paste.ini]
2019-11-21 06:34:37,457 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'nova/files/rocky/api-paste.ini.Debian'
2019-11-21 06:34:37,654 [salt.state       :300 ][INFO    ][28616] File changed:
--- 
+++ 
@@ -68,7 +68,6 @@
 
 [app:oscomputeversionapp]
 paste.app_factory = nova.api.openstack.compute.versions:Versions.factory
-
 ##########
 # Shared #
 ##########

2019-11-21 06:34:37,654 [salt.state       :1951][INFO    ][28616] Completed state [/etc/nova/api-paste.ini] at time 06:34:37.654899 duration_in_ms=220.33
2019-11-21 06:34:37,655 [salt.state       :1780][INFO    ][28616] Running state [/etc/default/nova-conductor] at time 06:34:37.655724
2019-11-21 06:34:37,656 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/default/nova-conductor]
2019-11-21 06:34:37,677 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'nova/files/default'
2019-11-21 06:34:37,687 [salt.state       :300 ][INFO    ][28616] File changed:
New file
2019-11-21 06:34:37,687 [salt.state       :1951][INFO    ][28616] Completed state [/etc/default/nova-conductor] at time 06:34:37.687686 duration_in_ms=31.961
2019-11-21 06:34:37,688 [salt.state       :1780][INFO    ][28616] Running state [/etc/default/nova-api] at time 06:34:37.688512
2019-11-21 06:34:37,688 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/default/nova-api]
2019-11-21 06:34:37,733 [salt.state       :300 ][INFO    ][28616] File changed:
New file
2019-11-21 06:34:37,733 [salt.state       :1951][INFO    ][28616] Completed state [/etc/default/nova-api] at time 06:34:37.733503 duration_in_ms=44.99
2019-11-21 06:34:37,734 [salt.state       :1780][INFO    ][28616] Running state [/etc/default/nova-consoleauth] at time 06:34:37.734337
2019-11-21 06:34:37,734 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/default/nova-consoleauth]
2019-11-21 06:34:37,765 [salt.state       :300 ][INFO    ][28616] File changed:
New file
2019-11-21 06:34:37,765 [salt.state       :1951][INFO    ][28616] Completed state [/etc/default/nova-consoleauth] at time 06:34:37.765460 duration_in_ms=31.122
2019-11-21 06:34:37,766 [salt.state       :1780][INFO    ][28616] Running state [/etc/default/nova-scheduler] at time 06:34:37.766503
2019-11-21 06:34:37,766 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/default/nova-scheduler]
2019-11-21 06:34:37,801 [salt.state       :300 ][INFO    ][28616] File changed:
New file
2019-11-21 06:34:37,802 [salt.state       :1951][INFO    ][28616] Completed state [/etc/default/nova-scheduler] at time 06:34:37.802011 duration_in_ms=35.505
2019-11-21 06:34:37,802 [salt.state       :1780][INFO    ][28616] Running state [/etc/default/nova-novncproxy] at time 06:34:37.802842
2019-11-21 06:34:37,803 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/default/nova-novncproxy]
2019-11-21 06:34:37,839 [salt.state       :300 ][INFO    ][28616] File changed:
New file
2019-11-21 06:34:37,839 [salt.state       :1951][INFO    ][28616] Completed state [/etc/default/nova-novncproxy] at time 06:34:37.839737 duration_in_ms=36.894
2019-11-21 06:34:37,843 [salt.state       :1780][INFO    ][28616] Running state [nova-conductor] at time 06:34:37.843116
2019-11-21 06:34:37,843 [salt.state       :1813][INFO    ][28616] Executing state service.running for [nova-conductor]
2019-11-21 06:34:37,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'status', 'nova-conductor.service', '-n', '0'] in directory '/root'
2019-11-21 06:34:37,867 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'nova-conductor.service'] in directory '/root'
2019-11-21 06:34:37,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-enabled', 'nova-conductor.service'] in directory '/root'
2019-11-21 06:34:37,911 [salt.state       :300 ][INFO    ][28616] The service nova-conductor is already running
2019-11-21 06:34:37,911 [salt.state       :1951][INFO    ][28616] Completed state [nova-conductor] at time 06:34:37.911495 duration_in_ms=68.377
2019-11-21 06:34:37,911 [salt.state       :1780][INFO    ][28616] Running state [nova-conductor] at time 06:34:37.911803
2019-11-21 06:34:37,912 [salt.state       :1813][INFO    ][28616] Executing state service.mod_watch for [nova-conductor]
2019-11-21 06:34:37,913 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'nova-conductor.service'] in directory '/root'
2019-11-21 06:34:37,934 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-conductor.service'] in directory '/root'
2019-11-21 06:34:38,877 [salt.state       :300 ][INFO    ][28616] {'nova-conductor': True}
2019-11-21 06:34:38,878 [salt.state       :1951][INFO    ][28616] Completed state [nova-conductor] at time 06:34:38.878014 duration_in_ms=966.21
2019-11-21 06:34:38,886 [salt.state       :1780][INFO    ][28616] Running state [nova-api] at time 06:34:38.886208
2019-11-21 06:34:38,887 [salt.state       :1813][INFO    ][28616] Executing state service.running for [nova-api]
2019-11-21 06:34:38,888 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'status', 'nova-api.service', '-n', '0'] in directory '/root'
2019-11-21 06:34:38,908 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'nova-api.service'] in directory '/root'
2019-11-21 06:34:38,926 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-enabled', 'nova-api.service'] in directory '/root'
2019-11-21 06:34:38,940 [salt.state       :300 ][INFO    ][28616] The service nova-api is already running
2019-11-21 06:34:38,941 [salt.state       :1951][INFO    ][28616] Completed state [nova-api] at time 06:34:38.940958 duration_in_ms=54.75
2019-11-21 06:34:38,941 [salt.state       :1780][INFO    ][28616] Running state [nova-api] at time 06:34:38.941295
2019-11-21 06:34:38,941 [salt.state       :1813][INFO    ][28616] Executing state service.mod_watch for [nova-api]
2019-11-21 06:34:38,942 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'nova-api.service'] in directory '/root'
2019-11-21 06:34:38,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-api.service'] in directory '/root'
2019-11-21 06:34:40,187 [salt.state       :300 ][INFO    ][28616] {'nova-api': True}
2019-11-21 06:34:40,188 [salt.state       :1951][INFO    ][28616] Completed state [nova-api] at time 06:34:40.188019 duration_in_ms=1246.723
2019-11-21 06:34:40,191 [salt.state       :1780][INFO    ][28616] Running state [nova-consoleauth] at time 06:34:40.191850
2019-11-21 06:34:40,192 [salt.state       :1813][INFO    ][28616] Executing state service.running for [nova-consoleauth]
2019-11-21 06:34:40,193 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'status', 'nova-consoleauth.service', '-n', '0'] in directory '/root'
2019-11-21 06:34:40,213 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'nova-consoleauth.service'] in directory '/root'
2019-11-21 06:34:40,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2019-11-21 06:34:40,254 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'nova-consoleauth.service'] in directory '/root'
2019-11-21 06:34:40,275 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'nova-consoleauth.service'] in directory '/root'
2019-11-21 06:34:40,297 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2019-11-21 06:34:40,311 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2019-11-21 06:34:40,328 [salt.state       :300 ][INFO    ][28616] {'nova-consoleauth': True}
2019-11-21 06:34:40,328 [salt.state       :1951][INFO    ][28616] Completed state [nova-consoleauth] at time 06:34:40.328520 duration_in_ms=136.669
2019-11-21 06:34:40,332 [salt.state       :1780][INFO    ][28616] Running state [nova-scheduler] at time 06:34:40.332242
2019-11-21 06:34:40,333 [salt.state       :1813][INFO    ][28616] Executing state service.running for [nova-scheduler]
2019-11-21 06:34:40,334 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'status', 'nova-scheduler.service', '-n', '0'] in directory '/root'
2019-11-21 06:34:40,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'nova-scheduler.service'] in directory '/root'
2019-11-21 06:34:40,378 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-enabled', 'nova-scheduler.service'] in directory '/root'
2019-11-21 06:34:40,407 [salt.state       :300 ][INFO    ][28616] The service nova-scheduler is already running
2019-11-21 06:34:40,408 [salt.state       :1951][INFO    ][28616] Completed state [nova-scheduler] at time 06:34:40.408220 duration_in_ms=75.977
2019-11-21 06:34:40,408 [salt.state       :1780][INFO    ][28616] Running state [nova-scheduler] at time 06:34:40.408508
2019-11-21 06:34:40,408 [salt.state       :1813][INFO    ][28616] Executing state service.mod_watch for [nova-scheduler]
2019-11-21 06:34:40,409 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'nova-scheduler.service'] in directory '/root'
2019-11-21 06:34:40,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-scheduler.service'] in directory '/root'
2019-11-21 06:34:40,738 [salt.state       :300 ][INFO    ][28616] {'nova-scheduler': True}
2019-11-21 06:34:40,739 [salt.state       :1951][INFO    ][28616] Completed state [nova-scheduler] at time 06:34:40.739250 duration_in_ms=330.742
2019-11-21 06:34:40,743 [salt.state       :1780][INFO    ][28616] Running state [nova-novncproxy] at time 06:34:40.743317
2019-11-21 06:34:40,743 [salt.state       :1813][INFO    ][28616] Executing state service.running for [nova-novncproxy]
2019-11-21 06:34:40,744 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'status', 'nova-novncproxy.service', '-n', '0'] in directory '/root'
2019-11-21 06:34:40,767 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'nova-novncproxy.service'] in directory '/root'
2019-11-21 06:34:40,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-enabled', 'nova-novncproxy.service'] in directory '/root'
2019-11-21 06:34:40,826 [salt.state       :300 ][INFO    ][28616] The service nova-novncproxy is already running
2019-11-21 06:34:40,826 [salt.state       :1951][INFO    ][28616] Completed state [nova-novncproxy] at time 06:34:40.826699 duration_in_ms=83.382
2019-11-21 06:34:40,827 [salt.state       :1780][INFO    ][28616] Running state [nova-novncproxy] at time 06:34:40.826985
2019-11-21 06:34:40,827 [salt.state       :1813][INFO    ][28616] Executing state service.mod_watch for [nova-novncproxy]
2019-11-21 06:34:40,828 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'nova-novncproxy.service'] in directory '/root'
2019-11-21 06:34:40,841 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-novncproxy.service'] in directory '/root'
2019-11-21 06:34:40,869 [salt.state       :300 ][INFO    ][28616] {'nova-novncproxy': True}
2019-11-21 06:34:40,869 [salt.state       :1951][INFO    ][28616] Completed state [nova-novncproxy] at time 06:34:40.869784 duration_in_ms=42.799
2019-11-21 06:34:40,871 [salt.state       :1780][INFO    ][28616] Running state [nova-manage db online_data_migrations] at time 06:34:40.871078
2019-11-21 06:34:40,871 [salt.state       :1813][INFO    ][28616] Executing state cmd.run for [nova-manage db online_data_migrations]
2019-11-21 06:34:40,875 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command '/bin/true' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:34:40,993 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command 'nova-manage db online_data_migrations' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:34:46,585 [salt.state       :300 ][INFO    ][28616] {'pid': 1439, 'retcode': 0, 'stderr': '', 'stdout': 'Running batches of 50 until complete\n+---------------------------------------------+--------------+-----------+\n|                  Migration                  | Total Needed | Completed |\n+---------------------------------------------+--------------+-----------+\n|         create_incomplete_consumers         |      0       |     0     |\n| delete_build_requests_with_no_instance_uuid |      0       |     0     |\n|      migrate_instances_add_request_spec     |      0       |     0     |\n|          migrate_keypairs_to_api_db         |      0       |     0     |\n|       migrate_quota_classes_to_api_db       |      0       |     0     |\n|        migrate_quota_limits_to_api_db       |      0       |     0     |\n|          migration_migrate_to_uuid          |      0       |     0     |\n|     populate_missing_availability_zones     |      0       |     0     |\n|          populate_queued_for_delete         |      0       |     0     |\n|                populate_uuids               |      0       |     0     |\n|     service_uuids_online_data_migration     |      0       |     0     |\n+---------------------------------------------+--------------+-----------+'}
2019-11-21 06:34:46,585 [salt.state       :1951][INFO    ][28616] Completed state [nova-manage db online_data_migrations] at time 06:34:46.585582 duration_in_ms=5714.502
2019-11-21 06:34:46,586 [salt.state       :1780][INFO    ][28616] Running state [/etc/systemd/system/nova-placement-api.service] at time 06:34:46.586023
2019-11-21 06:34:46,586 [salt.state       :1813][INFO    ][28616] Executing state file.symlink for [/etc/systemd/system/nova-placement-api.service]
2019-11-21 06:34:46,590 [salt.state       :300 ][INFO    ][28616] {'new': '/etc/systemd/system/nova-placement-api.service'}
2019-11-21 06:34:46,590 [salt.state       :1951][INFO    ][28616] Completed state [/etc/systemd/system/nova-placement-api.service] at time 06:34:46.590955 duration_in_ms=4.932
2019-11-21 06:34:46,593 [salt.state       :1780][INFO    ][28616] Running state [nova-placement-api] at time 06:34:46.593104
2019-11-21 06:34:46,593 [salt.state       :1813][INFO    ][28616] Executing state pkg.installed for [nova-placement-api]
2019-11-21 06:34:46,808 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:34:46,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-placement-api'] in directory '/root'
2019-11-21 06:34:49,600 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:34:49,661 [salt.state       :300 ][INFO    ][28616] Made the following changes:
'nova-placement-api' changed from 'absent' to '2:18.2.3-4~u16.04+mcp135'

2019-11-21 06:34:49,687 [salt.state       :915 ][INFO    ][28616] Loading fresh modules for state activity
2019-11-21 06:34:49,733 [salt.state       :1951][INFO    ][28616] Completed state [nova-placement-api] at time 06:34:49.733552 duration_in_ms=3140.447
2019-11-21 06:34:49,739 [salt.state       :1780][INFO    ][28616] Running state [/etc/apache2/sites-available/nova-placement-api.conf] at time 06:34:49.739159
2019-11-21 06:34:49,739 [salt.state       :1813][INFO    ][28616] Executing state file.managed for [/etc/apache2/sites-available/nova-placement-api.conf]
2019-11-21 06:34:49,771 [salt.fileclient  :1219][INFO    ][28616] Fetching file from saltenv 'base', ** done ** 'nova/files/rocky/nova-placement-api.conf'
2019-11-21 06:34:49,947 [salt.state       :300 ][INFO    ][28616] File changed:
--- 
+++ 
@@ -1,6 +1,7 @@
-Listen 8778
 
-<VirtualHost *:8778>
+Listen 172.16.10.36:8778
+
+<VirtualHost 172.16.10.36:8778>
     WSGIScriptAlias / /usr/bin/nova-placement-api
     WSGIDaemonProcess nova-placement processes=5 threads=1 user=nova group=nova display-name=%{GROUP}
     WSGIProcessGroup nova-placement
@@ -13,7 +14,7 @@
     </IfVersion>
 
     ErrorLog /var/log/apache2/nova_placement_error.log
-    CustomLog /var/log/apache2/nova_placement_access.log combined
+    CustomLog /var/log/apache2/nova_placement_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 
     <Directory /usr/bin>
         <IfVersion >= 2.4>
@@ -25,13 +26,3 @@
         </IfVersion>
     </Directory>
 </VirtualHost>
-
-Alias /placement /usr/bin/nova-placement-api
-<Location /placement>
-  SetHandler wsgi-script
-  Options +ExecCGI
-
-  WSGIProcessGroup nova-placement
-  WSGIApplicationGroup %{GLOBAL}
-  WSGIPassAuthorization On
-</Location>

2019-11-21 06:34:49,947 [salt.state       :1951][INFO    ][28616] Completed state [/etc/apache2/sites-available/nova-placement-api.conf] at time 06:34:49.947231 duration_in_ms=208.072
2019-11-21 06:34:49,953 [salt.state       :1780][INFO    ][28616] Running state [nova-placement-api] at time 06:34:49.953729
2019-11-21 06:34:49,954 [salt.state       :1813][INFO    ][28616] Executing state apache_site.enabled for [nova-placement-api]
2019-11-21 06:34:49,954 [salt.state       :300 ][INFO    ][28616] nova-placement-api already enabled.
2019-11-21 06:34:49,954 [salt.state       :1951][INFO    ][28616] Completed state [nova-placement-api] at time 06:34:49.954519 duration_in_ms=0.79
2019-11-21 06:34:49,955 [salt.state       :1780][INFO    ][28616] Running state [nova-manage cell_v2 discover_hosts --verbose] at time 06:34:49.955593
2019-11-21 06:34:49,955 [salt.state       :1813][INFO    ][28616] Executing state cmd.run for [nova-manage cell_v2 discover_hosts --verbose]
2019-11-21 06:34:49,958 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command 'nova-manage cell_v2 discover_hosts --verbose' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:34:54,613 [salt.state       :300 ][INFO    ][28616] {'pid': 1998, 'retcode': 0, 'stderr': '', 'stdout': "Found 2 cell mappings.\nSkipping cell0 since it does not contain hosts.\nGetting computes from cell 'cell1': f10893a6-686c-4f64-81f7-f164ea34eb7e\nFound 0 unmapped computes in cell: f10893a6-686c-4f64-81f7-f164ea34eb7e"}
2019-11-21 06:34:54,614 [salt.state       :1951][INFO    ][28616] Completed state [nova-manage cell_v2 discover_hosts --verbose] at time 06:34:54.613929 duration_in_ms=4658.335
2019-11-21 06:34:54,630 [salt.state       :1780][INFO    ][28616] Running state [cell1] at time 06:34:54.630002
2019-11-21 06:34:54,630 [salt.state       :1813][INFO    ][28616] Executing state novav21.instances_mapped_to_cell for [cell1]
2019-11-21 06:34:54,631 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command 'nova-manage cell_v2 list_cells 2>/dev/null | awk '/cell1/ {print $4}'' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:34:57,288 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063457278607
2019-11-21 06:34:57,305 [salt.minion      :1432][INFO    ][2094] Starting a new job with PID 2094
2019-11-21 06:34:57,320 [salt.minion      :1711][INFO    ][2094] Returning information for job: 20191121063457278607
2019-11-21 06:34:59,275 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command 'nova-manage cell_v2 map_instances --cell_uuid f10893a6-686c-4f64-81f7-f164ea34eb7e' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:35:04,048 [salt.state       :300 ][INFO    ][28616] All instances mapped in cell cell1
2019-11-21 06:35:04,048 [salt.state       :1951][INFO    ][28616] Completed state [cell1] at time 06:35:04.048769 duration_in_ms=9418.767
2019-11-21 06:35:04,588 [salt.state       :1780][INFO    ][28616] Running state [apache2] at time 06:35:04.588580
2019-11-21 06:35:04,589 [salt.state       :1813][INFO    ][28616] Executing state service.running for [apache2]
2019-11-21 06:35:04,590 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:35:04,607 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:35:04,629 [salt.state       :300 ][INFO    ][28616] The service apache2 is already running
2019-11-21 06:35:04,630 [salt.state       :1951][INFO    ][28616] Completed state [apache2] at time 06:35:04.630416 duration_in_ms=41.837
2019-11-21 06:35:04,630 [salt.state       :1780][INFO    ][28616] Running state [apache2] at time 06:35:04.630886
2019-11-21 06:35:04,631 [salt.state       :1813][INFO    ][28616] Executing state service.mod_watch for [apache2]
2019-11-21 06:35:04,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:35:04,648 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28616] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-11-21 06:35:06,916 [salt.state       :300 ][INFO    ][28616] {'apache2': True}
2019-11-21 06:35:06,917 [salt.state       :1951][INFO    ][28616] Completed state [apache2] at time 06:35:06.917743 duration_in_ms=2286.855
2019-11-21 06:35:06,941 [salt.minion      :1711][INFO    ][28616] Returning information for job: 20191121063241701035
2019-11-21 06:35:07,604 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121063507593808
2019-11-21 06:35:07,617 [salt.minion      :1432][INFO    ][2525] Starting a new job with PID 2525
2019-11-21 06:35:14,139 [salt.state       :915 ][INFO    ][2525] Loading fresh modules for state activity
2019-11-21 06:35:14,197 [salt.fileclient  :1219][INFO    ][2525] Fetching file from saltenv 'base', ** done ** 'heat/init.sls'
2019-11-21 06:35:14,227 [salt.fileclient  :1219][INFO    ][2525] Fetching file from saltenv 'base', ** done ** 'heat/server.sls'
2019-11-21 06:35:14,392 [salt.fileclient  :1219][INFO    ][2525] Fetching file from saltenv 'base', ** done ** 'heat/db/offline_sync.sls'
2019-11-21 06:35:14,449 [salt.fileclient  :1219][INFO    ][2525] Fetching file from saltenv 'base', ** done ** 'heat/_ssl/mysql.sls'
2019-11-21 06:35:14,547 [salt.fileclient  :1219][INFO    ][2525] Fetching file from saltenv 'base', ** done ** 'heat/_ssl/rabbitmq.sls'
2019-11-21 06:35:15,180 [keyring.backend  :154 ][INFO    ][2525] Loading Windows (alt)
2019-11-21 06:35:15,184 [keyring.backend  :154 ][INFO    ][2525] Loading pyfs
2019-11-21 06:35:15,185 [keyring.backend  :154 ][INFO    ][2525] Loading multi
2019-11-21 06:35:15,185 [keyring.backend  :154 ][INFO    ][2525] Loading Google
2019-11-21 06:35:15,186 [keyring.backend  :154 ][INFO    ][2525] Loading Gnome
2019-11-21 06:35:15,191 [keyring.backend  :154 ][INFO    ][2525] Loading keyczar
2019-11-21 06:35:15,191 [keyring.backend  :154 ][INFO    ][2525] Loading file
2019-11-21 06:35:15,191 [keyring.backend  :154 ][INFO    ][2525] Loading kwallet
2019-11-21 06:35:16,111 [salt.state       :1780][INFO    ][2525] Running state [heat-api] at time 06:35:16.111929
2019-11-21 06:35:16,112 [salt.state       :1813][INFO    ][2525] Executing state pkg.installed for [heat-api]
2019-11-21 06:35:16,113 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:35:16,561 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['apt-cache', '-q', 'policy', 'heat-api'] in directory '/root'
2019-11-21 06:35:16,643 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:35:18,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:35:18,924 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-api'] in directory '/root'
2019-11-21 06:35:22,731 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063522714224
2019-11-21 06:35:22,744 [salt.minion      :1432][INFO    ][3007] Starting a new job with PID 3007
2019-11-21 06:35:22,759 [salt.minion      :1711][INFO    ][3007] Returning information for job: 20191121063522714224
2019-11-21 06:35:37,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:35:37,397 [salt.state       :300 ][INFO    ][2525] Made the following changes:
'python-magnumclient' changed from 'absent' to '2.8.0-1.0~u16.04+mcp1'
'python-zunclient' changed from 'absent' to '2.1.0-1~u16.04+mcp'
'python-heatclient' changed from 'absent' to '1.16.2-2~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-websocket' changed from 'absent' to '0.48.0-1~u16.04+mcp'
'python-senlinclient' changed from 'absent' to '1.7.0-1.0~u16.04+mcp2'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-monascaclient' changed from 'absent' to '1.12.1-1~u16.04+mcp8'
'python-mistralclient' changed from 'absent' to '1:3.3.0-1.0~u16.04+mcp1'
'heat-common' changed from 'absent' to '1:11.0.2-5~u16.04+mcp58'
'python-docker' changed from 'absent' to '3.2.1-1~u16.04+mcp'
'python-designateclient' changed from 'absent' to '2.10.0-2~u16.04+mcp5'
'golang-docker-credential-helpers' changed from 'absent' to '0.6.1-1~u16.04+mcp'
'sqlite3' changed from 'absent' to '3.11.0-1ubuntu1.2'
'python-troveclient' changed from 'absent' to '1:2.14.0-1.0~u16.04+mcp2'
'python2.7-waitress' changed from 'absent' to '1'
'python-saharaclient' changed from 'absent' to '1.5.0-1.0~u16.04+mcp1'
'heat-api' changed from 'absent' to '1:11.0.2-5~u16.04+mcp58'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-blazarclient' changed from 'absent' to '2.0.0-1~u16.04+mcp'
'python-octaviaclient' changed from 'absent' to '1.6.1-2~u16.04+mcp7'
'libsecret-1-0' changed from 'absent' to '0.18.4-1ubuntu2'
'python-manilaclient' changed from 'absent' to '1.24.2-1~u16.04+mcp6'
'python-neutron-lib' changed from 'absent' to '1.18.0-1~u16.04+mcp8'
'python-weakrefmethod' changed from 'absent' to '1.0.3-2~u16.04+mcp1'
'python-q-text-as-data' changed from 'absent' to '1.4.0-1'
'python-pecan' changed from 'absent' to '1.3.2-2~u16.04+mcp'
'python-aodhclient' changed from 'absent' to '1.1.1-2~u16.04+mcp5'
'python-croniter' changed from 'absent' to '0.3.8-1'
'python-backports.ssl-match-hostname' changed from 'absent' to '3.5.0.1-1~u16.04+mcp'
'python-dockerpycreds' changed from 'absent' to '0.2.2-1~u16.04+mcp'
'libsecret-common' changed from 'absent' to '0.18.4-1ubuntu2'
'python-heat' changed from 'absent' to '1:11.0.2-5~u16.04+mcp58'
'python-zaqarclient' changed from 'absent' to '1.9.0-1.0~u16.04+mcp2'
'python-yaql' changed from 'absent' to '1.1.3-2~u16.04+mcp1'
'q-text-as-data' changed from 'absent' to '1'

2019-11-21 06:35:37,426 [salt.state       :915 ][INFO    ][2525] Loading fresh modules for state activity
2019-11-21 06:35:37,467 [salt.state       :1951][INFO    ][2525] Completed state [heat-api] at time 06:35:37.467654 duration_in_ms=21355.726
2019-11-21 06:35:37,473 [salt.state       :1780][INFO    ][2525] Running state [heat-api-cfn] at time 06:35:37.473414
2019-11-21 06:35:37,473 [salt.state       :1813][INFO    ][2525] Executing state pkg.installed for [heat-api-cfn]
2019-11-21 06:35:38,457 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:35:38,488 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-api-cfn'] in directory '/root'
2019-11-21 06:35:42,238 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:35:42,292 [salt.state       :300 ][INFO    ][2525] Made the following changes:
'heat-api-cfn' changed from 'absent' to '1:11.0.2-5~u16.04+mcp58'

2019-11-21 06:35:42,320 [salt.state       :915 ][INFO    ][2525] Loading fresh modules for state activity
2019-11-21 06:35:42,477 [salt.state       :1951][INFO    ][2525] Completed state [heat-api-cfn] at time 06:35:42.477527 duration_in_ms=5004.112
2019-11-21 06:35:42,483 [salt.state       :1780][INFO    ][2525] Running state [heat-engine] at time 06:35:42.483200
2019-11-21 06:35:42,483 [salt.state       :1813][INFO    ][2525] Executing state pkg.installed for [heat-engine]
2019-11-21 06:35:43,248 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:35:43,281 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-engine'] in directory '/root'
2019-11-21 06:35:46,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:35:46,745 [salt.state       :300 ][INFO    ][2525] Made the following changes:
'heat-engine' changed from 'absent' to '1:11.0.2-5~u16.04+mcp58'

2019-11-21 06:35:46,779 [salt.state       :915 ][INFO    ][2525] Loading fresh modules for state activity
2019-11-21 06:35:46,831 [salt.state       :1951][INFO    ][2525] Completed state [heat-engine] at time 06:35:46.831550 duration_in_ms=4348.348
2019-11-21 06:35:46,841 [salt.state       :1780][INFO    ][2525] Running state [heat-common] at time 06:35:46.841788
2019-11-21 06:35:46,842 [salt.state       :1813][INFO    ][2525] Executing state pkg.installed for [heat-common]
2019-11-21 06:35:47,633 [salt.state       :300 ][INFO    ][2525] All specified packages are already installed
2019-11-21 06:35:47,634 [salt.state       :1951][INFO    ][2525] Completed state [heat-common] at time 06:35:47.634562 duration_in_ms=792.773
2019-11-21 06:35:47,635 [salt.state       :1780][INFO    ][2525] Running state [python-heatclient] at time 06:35:47.635116
2019-11-21 06:35:47,635 [salt.state       :1813][INFO    ][2525] Executing state pkg.installed for [python-heatclient]
2019-11-21 06:35:47,645 [salt.state       :300 ][INFO    ][2525] All specified packages are already installed
2019-11-21 06:35:47,645 [salt.state       :1951][INFO    ][2525] Completed state [python-heatclient] at time 06:35:47.645705 duration_in_ms=10.589
2019-11-21 06:35:47,646 [salt.state       :1780][INFO    ][2525] Running state [gettext-base] at time 06:35:47.646172
2019-11-21 06:35:47,646 [salt.state       :1813][INFO    ][2525] Executing state pkg.installed for [gettext-base]
2019-11-21 06:35:47,655 [salt.state       :300 ][INFO    ][2525] All specified packages are already installed
2019-11-21 06:35:47,656 [salt.state       :1951][INFO    ][2525] Completed state [gettext-base] at time 06:35:47.655976 duration_in_ms=9.804
2019-11-21 06:35:47,660 [salt.state       :1780][INFO    ][2525] Running state [heat_ssl_mysql] at time 06:35:47.660700
2019-11-21 06:35:47,661 [salt.state       :1813][INFO    ][2525] Executing state test.show_notification for [heat_ssl_mysql]
2019-11-21 06:35:47,661 [salt.state       :300 ][INFO    ][2525] Running heat._ssl.mysql
2019-11-21 06:35:47,662 [salt.state       :1951][INFO    ][2525] Completed state [heat_ssl_mysql] at time 06:35:47.662227 duration_in_ms=1.528
2019-11-21 06:35:47,662 [salt.state       :1780][INFO    ][2525] Running state [heat_ssl_rabbitmq] at time 06:35:47.662788
2019-11-21 06:35:47,663 [salt.state       :1813][INFO    ][2525] Executing state test.show_notification for [heat_ssl_rabbitmq]
2019-11-21 06:35:47,663 [salt.state       :300 ][INFO    ][2525] Running heat._ssl.rabbitmq
2019-11-21 06:35:47,664 [salt.state       :1951][INFO    ][2525] Completed state [heat_ssl_rabbitmq] at time 06:35:47.664040 duration_in_ms=1.252
2019-11-21 06:35:47,664 [salt.state       :1780][INFO    ][2525] Running state [/etc/heat/heat.conf] at time 06:35:47.664755
2019-11-21 06:35:47,665 [salt.state       :1813][INFO    ][2525] Executing state file.managed for [/etc/heat/heat.conf]
2019-11-21 06:35:47,690 [salt.fileclient  :1219][INFO    ][2525] Fetching file from saltenv 'base', ** done ** 'heat/files/rocky/heat.conf.Debian'
2019-11-21 06:35:48,025 [salt.fileclient  :1219][INFO    ][2525] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/service/_ssl.conf'
2019-11-21 06:35:48,049 [salt.state       :300 ][INFO    ][2525] File changed:
--- 
+++ 
@@ -1,10 +1,217 @@
+
+
 [DEFAULT]
-
-#
-# From heat.common.config
-#
-
-# Name of the engine node. This can be an opaque identifier. It is not necessarily a hostname, FQDN, or IP address. (string value)
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+rpc_response_timeout = 600
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+
+#
+# From heat.common.config
+#
+
+# Name of the engine node. This can be an opaque identifier. It is not
+# necessarily a hostname, FQDN, or IP address. (string value)
 #host = <Hostname>
 
 # List of directories to search for plug-ins. (list value)
@@ -16,63 +223,74 @@
 # The directory to search for template files. (string value)
 #template_dir = /etc/heat/templates
 
-# DEPRECATED: Select deferred auth method, stored password or trusts. (string value)
+# DEPRECATED: Select deferred auth method, stored password or trusts. (string
+# value)
 # Possible values:
 # password - <No description provided>
 # trusts - <No description provided>
 # This option is deprecated for removal since 9.0.0.
 # Its value may be silently ignored in the future.
-# Reason: Stored password based deferred auth is broken when used with keystone v3 and is not supported.
+# Reason: Stored password based deferred auth is broken when used with keystone
+# v3 and is not supported.
 #deferred_auth_method = trusts
 
-# Allow reauthentication on token expiry, such that long-running tasks may complete. Note this defeats the expiry of any provided user
-# tokens. (string value)
+# Allow reauthentication on token expiry, such that long-running tasks may
+# complete. Note this defeats the expiry of any provided user tokens. (string
+# value)
 # Possible values:
 # '' - <No description provided>
 # trusts - <No description provided>
 #reauthentication_auth_method =
 
-# Subset of trustor roles to be delegated to heat. If left unset, all roles of a user will be delegated to heat when creating a stack. (list
-# value)
+# Subset of trustor roles to be delegated to heat. If left unset, all roles of
+# a user will be delegated to heat when creating a stack. (list value)
 #trusts_delegated_roles =
 
-# Maximum resources allowed per top-level stack. -1 stands for unlimited. (integer value)
-#max_resources_per_stack = 1000
-
-# Maximum number of stacks any one tenant may have active at one time. (integer value)
+# Maximum resources allowed per top-level stack. -1 stands for unlimited.
+# (integer value)
+max_resources_per_stack = 20000
+
+# Maximum number of stacks any one tenant may have active at one time. (integer
+# value)
 #max_stacks_per_tenant = 100
 
-# Number of times to retry to bring a resource to a non-error state. Set to 0 to disable retries. (integer value)
+# Number of times to retry to bring a resource to a non-error state. Set to 0
+# to disable retries. (integer value)
 #action_retry_limit = 5
 
-# Number of times to retry when a client encounters an expected intermittent error. Set to 0 to disable retries. (integer value)
+# Number of times to retry when a client encounters an expected intermittent
+# error. Set to 0 to disable retries. (integer value)
 #client_retry_limit = 2
 
 # Maximum length of a server name to be used in nova. (integer value)
 # Maximum value: 53
 #max_server_name_length = 53
 
-# Number of times to check whether an interface has been attached or detached. (integer value)
+# Number of times to check whether an interface has been attached or detached.
+# (integer value)
 # Minimum value: 1
 #max_interface_check_attempts = 10
 
-# Controls how many events will be pruned whenever a stack's events are purged. Set this lower to keep more events at the expense of more
-# frequent purges. (integer value)
+# Controls how many events will be pruned whenever a stack's events are purged.
+# Set this lower to keep more events at the expense of more frequent purges.
+# (integer value)
 # Minimum value: 1
 #event_purge_batch_size = 200
 
-# Rough number of maximum events that will be available per stack. Actual number of events can be a bit higher since purge checks take place
-# randomly 200/event_purge_batch_size percent of the time. Older events are deleted when events are purged. Set to 0 for unlimited events
-# per stack. (integer value)
+# Rough number of maximum events that will be available per stack. Actual
+# number of events can be a bit higher since purge checks take place randomly
+# 200/event_purge_batch_size percent of the time. Older events are deleted when
+# events are purged. Set to 0 for unlimited events per stack. (integer value)
 #max_events_per_stack = 1000
 
 # Timeout in seconds for stack action (ie. create or update). (integer value)
 #stack_action_timeout = 3600
-
-# The amount of time in seconds after an error has occurred that tasks may continue to run before being cancelled. (integer value)
+# The amount of time in seconds after an error has occurred that tasks may
+# continue to run before being cancelled. (integer value)
 #error_wait_time = 240
 
-# RPC timeout for the engine liveness check that is used for stack locking. (integer value)
+# RPC timeout for the engine liveness check that is used for stack locking.
+# (integer value)
 #engine_life_check_timeout = 2
 
 # DEPRECATED: Enable the legacy OS::Heat::CWLiteAlarm resource. (boolean value)
@@ -87,17 +305,23 @@
 # Enable the preview Stack Adopt feature. (boolean value)
 #enable_stack_adopt = false
 
-# Enables engine with convergence architecture. All stacks with this option will be created using convergence engine. (boolean value)
+# Enables engine with convergence architecture. All stacks with this option
+# will be created using convergence engine. (boolean value)
 #convergence_engine = true
 
-# On update, enables heat to collect existing resource properties from reality and converge to updated template. (boolean value)
+# On update, enables heat to collect existing resource properties from reality
+# and converge to updated template. (boolean value)
 #observe_on_update = false
 
-# Template default for how the server should receive the metadata required for software configuration. POLL_SERVER_CFN will allow calls to
-# the cfn API action DescribeStackResource authenticated with the provided keypair (requires enabled heat-api-cfn). POLL_SERVER_HEAT will
-# allow calls to the Heat API resource-show using the provided keystone credentials (requires keystone v3 API, and configured stack_user_*
-# config options). POLL_TEMP_URL will create and populate a Swift TempURL with metadata for polling (requires object-store endpoint which
-# supports TempURL).ZAQAR_MESSAGE will create a dedicated zaqar queue and post the metadata for polling. (string value)
+# Template default for how the server should receive the metadata required for
+# software configuration. POLL_SERVER_CFN will allow calls to the cfn API
+# action DescribeStackResource authenticated with the provided keypair
+# (requires enabled heat-api-cfn). POLL_SERVER_HEAT will allow calls to the
+# Heat API resource-show using the provided keystone credentials (requires
+# keystone v3 API, and configured stack_user_* config options). POLL_TEMP_URL
+# will create and populate a Swift TempURL with metadata for polling (requires
+# object-store endpoint which supports TempURL).ZAQAR_MESSAGE will create a
+# dedicated zaqar queue and post the metadata for polling. (string value)
 # Possible values:
 # POLL_SERVER_CFN - <No description provided>
 # POLL_SERVER_HEAT - <No description provided>
@@ -105,10 +329,13 @@
 # ZAQAR_MESSAGE - <No description provided>
 #default_software_config_transport = POLL_SERVER_CFN
 
-# Template default for how the server should signal to heat with the deployment output values. CFN_SIGNAL will allow an HTTP POST to a CFN
-# keypair signed URL (requires enabled heat-api-cfn). TEMP_URL_SIGNAL will create a Swift TempURL to be signaled via HTTP PUT (requires
-# object-store endpoint which supports TempURL). HEAT_SIGNAL will allow calls to the Heat API resource-signal using the provided keystone
-# credentials. ZAQAR_SIGNAL will create a dedicated zaqar queue to be signaled using the provided keystone credentials. (string value)
+# Template default for how the server should signal to heat with the deployment
+# output values. CFN_SIGNAL will allow an HTTP POST to a CFN keypair signed URL
+# (requires enabled heat-api-cfn). TEMP_URL_SIGNAL will create a Swift TempURL
+# to be signaled via HTTP PUT (requires object-store endpoint which supports
+# TempURL). HEAT_SIGNAL will allow calls to the Heat API resource-signal using
+# the provided keystone credentials. ZAQAR_SIGNAL will create a dedicated zaqar
+# queue to be signaled using the provided keystone credentials. (string value)
 # Possible values:
 # CFN_SIGNAL - <No description provided>
 # TEMP_URL_SIGNAL - <No description provided>
@@ -116,100 +343,118 @@
 # ZAQAR_SIGNAL - <No description provided>
 #default_deployment_signal_transport = CFN_SIGNAL
 
-# Template default for how the user_data should be formatted for the server. For HEAT_CFNTOOLS, the user_data is bundled as part of the
-# heat-cfntools cloud-init boot configuration data. For RAW the user_data is passed to Nova unmodified. For SOFTWARE_CONFIG user_data is
-# bundled as part of the software config data, and metadata is derived from any associated SoftwareDeployment resources. (string value)
+# Template default for how the user_data should be formatted for the server.
+# For HEAT_CFNTOOLS, the user_data is bundled as part of the heat-cfntools
+# cloud-init boot configuration data. For RAW the user_data is passed to Nova
+# unmodified. For SOFTWARE_CONFIG user_data is bundled as part of the software
+# config data, and metadata is derived from any associated SoftwareDeployment
+# resources. (string value)
 # Possible values:
 # HEAT_CFNTOOLS - <No description provided>
 # RAW - <No description provided>
 # SOFTWARE_CONFIG - <No description provided>
 #default_user_data_format = HEAT_CFNTOOLS
 
-# Stacks containing these tag names will be hidden. Multiple tags should be given in a comma-delimited list (eg.
-# hidden_stack_tags=hide_me,me_too). (list value)
+# Stacks containing these tag names will be hidden. Multiple tags should be
+# given in a comma-delimited list (eg. hidden_stack_tags=hide_me,me_too). (list
+# value)
 #hidden_stack_tags = data-processing-cluster
 
 # Deprecated. (string value)
 #onready = <None>
 
-# When this feature is enabled, scheduler hints identifying the heat stack context of a server or volume resource are passed to the
-# configured schedulers in nova and cinder, for creates done using heat resource types OS::Cinder::Volume, OS::Nova::Server, and
-# AWS::EC2::Instance. heat_root_stack_id will be set to the id of the root stack of the resource, heat_stack_id will be set to the id of the
-# resource's parent stack, heat_stack_name will be set to the name of the resource's parent stack, heat_path_in_stack will be set to a list
-# of comma delimited strings of stackresourcename and stackname with list[0] being 'rootstackname', heat_resource_name will be set to the
-# resource's name, and heat_resource_uuid will be set to the resource's orchestration id. (boolean value)
+# When this feature is enabled, scheduler hints identifying the heat stack
+# context of a server or volume resource are passed to the configured
+# schedulers in nova and cinder, for creates done using heat resource types
+# OS::Cinder::Volume, OS::Nova::Server, and AWS::EC2::Instance.
+# heat_root_stack_id will be set to the id of the root stack of the resource,
+# heat_stack_id will be set to the id of the resource's parent stack,
+# heat_stack_name will be set to the name of the resource's parent stack,
+# heat_path_in_stack will be set to a list of comma delimited strings of
+# stackresourcename and stackname with list[0] being 'rootstackname',
+# heat_resource_name will be set to the resource's name, and heat_resource_uuid
+# will be set to the resource's orchestration id. (boolean value)
 #stack_scheduler_hints = false
 
-# Encrypt template parameters that were marked as hidden and also all the resource properties before storing them in database. (boolean
-# value)
+# Encrypt template parameters that were marked as hidden and also all the
+# resource properties before storing them in database. (boolean value)
 #encrypt_parameters_and_properties = false
 
 # Seconds between running periodic tasks. (integer value)
 #periodic_interval = 60
 
-# URL of the Heat metadata server. NOTE: Setting this is only needed if you require instances to use a different endpoint than in the
-# keystone catalog (string value)
+# URL of the Heat metadata server. NOTE: Setting this is only needed if you
+# require instances to use a different endpoint than in the keystone catalog
+# (string value)
 #heat_metadata_server_url = <None>
+heat_metadata_server_url = http://172.16.10.36:8000
 
 # URL of the Heat waitcondition server. (string value)
 #heat_waitcondition_server_url = <None>
+heat_waitcondition_server_url = http://172.16.10.36:8000/v1/waitcondition
 
 # DEPRECATED: URL of the Heat CloudWatch server. (string value)
 # This option is deprecated for removal since 10.0.0.
 # Its value may be silently ignored in the future.
 # Reason: Heat CloudWatch Service has been removed.
-#heat_watch_server_url =
+#heat_watch_server_url = http://172.16.10.36:8003
 
 # Instance connection to CFN/CW API via https. (string value)
-#instance_connection_is_secure = 0
-
-# Instance connection to CFN/CW API validate certs if SSL is used. (string value)
+instance_connection_is_secure = 0
+
+# Instance connection to CFN/CW API validate certs if SSL is used. (string
+# value)
 #instance_connection_https_validate_certificates = 1
 
 # Default region name used to get services endpoints. (string value)
 #region_name_for_services = <None>
+region_name_for_services = RegionOne
 
 # Keystone role for heat template-defined users. (string value)
 #heat_stack_user_role = heat_stack_user
 
-# Keystone domain ID which contains heat template-defined users. If this option is set, stack_user_domain_name option will be ignored.
-# (string value)
+# Keystone domain ID which contains heat template-defined users. If this option
+# is set, stack_user_domain_name option will be ignored. (string value)
 # Deprecated group/name - [DEFAULT]/stack_user_domain
 #stack_user_domain_id = <None>
 
-# Keystone domain name which contains heat template-defined users. If `stack_user_domain_id` option is set, this option is ignored. (string
-# value)
+# Keystone domain name which contains heat template-defined users. If
+# `stack_user_domain_id` option is set, this option is ignored. (string value)
 stack_user_domain_name = heat
 
-# Keystone username, a user with roles sufficient to manage users and projects in the stack_user_domain. (string value)
+# Keystone username, a user with roles sufficient to manage users and projects
+# in the stack_user_domain. (string value)
+#stack_domain_admin = <None>
 stack_domain_admin = heat_domain_admin
 
 # Keystone password for stack_domain_admin user. (string value)
-stack_domain_admin_password = 
+#stack_domain_admin_password = <None>
+stack_domain_admin_password = opnfv_secret
 
 # Maximum raw byte size of any template. (integer value)
-#max_template_size = 524288
+max_template_size = 5440000
 
 # Maximum depth allowed when using nested stacks. (integer value)
 #max_nested_stack_depth = 5
 
-# Number of heat-engine processes to fork and run. Will default to either to 4 or number of CPUs on the host, whichever is greater. (integer
-# value)
+# Number of heat-engine processes to fork and run. Will default to either to 4
+# or number of CPUs on the host, whichever is greater. (integer value)
 #num_engine_workers = <None>
 
 #
 # From heat.common.crypt
 #
 
-# Key used to encrypt authentication info in the database. Length of this key must be 32 characters. (string value)
-#auth_encryption_key = notgood but just long enough i t
+# Key used to encrypt authentication info in the database. Length of this key
+# must be 32 characters. (string value)
 
 #
 # From heat.common.wsgi
 #
 
-# Maximum raw byte size of JSON request body. Should be larger than max_template_size. (integer value)
-#max_json_body_size = 1048576
+# Maximum raw byte size of JSON request body. Should be larger than
+# max_template_size. (integer value)
+max_json_body_size = 10880000
 
 #
 # From heat.engine.clients
@@ -241,778 +486,1645 @@
 
 # Custom template for the built-in loadbalancer nested stack. (string value)
 #loadbalancer_template = <None>
-
 #
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
-# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
-# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
 # logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
 # (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
 # option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option is ignored if log_config_append is set. (string value)
+log_file = /var/log/heat/heat.log
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
-# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
-# log_config_append is set. (boolean value)
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
 #watch_log_file = false
 
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
 # log_config_append is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal
-# native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
 #use_journal = false
 
-# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
-# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to
-# rate_limit_except_level are not filtered. An empty string means that all levels are filtered. (string value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or resolve to this address.
+[auth_password]
+
+#
+# From heat.common.config
+#
+
+# Allow orchestration of multiple clouds. (boolean value)
+#multi_cloud = false
+
+# Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least
+# one endpoint needs to be specified. (list value)
+#allowed_auth_uris =
+
+
+[clients]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = publicURL
+endpoint_type = internalURL
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+
+[clients_aodh]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_barbican]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_ceilometer]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_cinder]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+# Allow client's debug log output. (boolean value)
+#http_log_debug = false
+
+
+[clients_designate]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_glance]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_heat]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+endpoint_type = publicURL
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# Optional heat url in format like http://0.0.0.0:8004/v1/%(tenant_id)s.
 # (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite
-# linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed.
-# Positive values specify an upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target. (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct
-# connections for direct message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.
-# (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
+#url =
+
+
+[clients_keystone]
+
+#
+# From heat.common.config
+#
+# Unversioned keystone url in format like http://0.0.0.0:5000. (string value)
+#auth_uri =
+auth_uri=http://172.16.10.36:35357
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+[clients_magnum]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_manila]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_mistral]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_monasca]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_neutron]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_nova]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+# Allow client's debug log output. (boolean value)
+#http_log_debug = false
+
+
+[clients_octavia]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_sahara]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_senlin]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_swift]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_trove]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_zaqar]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[ec2authtoken]
+
+#
+# From heat.api.aws.ec2token
+#
+
+# Authentication Endpoint URI. (string value)
+#auth_uri = <None>
+# NOTE(vsaienko) autodiscovery doesn't work here. Set version explicitly
+auth_uri = http://172.16.10.36:5000/v3
+
+# Allow orchestration of multiple clouds. (boolean value)
+#multi_cloud = false
+
+# Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least
+# one endpoint needs to be specified. (list value)
+#allowed_auth_uris =
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = false
+
+
+[eventlet_opts]
+
+#
+# From heat.common.wsgi
+#
+
+# If False, closes the client socket connection explicitly. (boolean value)
+#wsgi_keep_alive = true
+
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
+#client_socket_timeout = 900
+
+
+[heat_api]
+
+#
+# From heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a particular network
+# interface. (IP address value)
+#bind_host = 0.0.0.0
+bind_host = 172.16.10.36
+
+# The port on which the server will listen. (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
+#bind_port = 8004
+
+# Number of backlog requests to configure the socket with. (integer value)
+#backlog = 4096
+
+# Location of the SSL certificate file to use for SSL mode. (string value)
+#cert_file = <None>
+
+# Location of the SSL key file to use for enabling SSL mode. (string value)
+#key_file = <None>
+
+# Number of workers for Heat service. Default value 0 means, that service will
+# start number of workers equal number of cores on server. (integer value)
+# Minimum value: 0
+#workers = 0
+workers = 4
+
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated by the
+# Keystone v3 API with big service catalogs). (integer value)
+#max_header_line = 16384
+
+# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds
+# that the connection must be idle before TCP starts sending keepalive probes.
+# (integer value)
+#tcp_keepidle = 600
+
+
+[heat_api_cfn]
+
+#
+# From heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a particular network
+# interface. (IP address value)
+bind_host = 172.16.10.36
+
+# The port on which the server will listen. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#bind_port = 8000
+
+# Number of backlog requests to configure the socket with. (integer value)
+#backlog = 4096
+
+# Location of the SSL certificate file to use for SSL mode. (string value)
+#cert_file = <None>
+
+# Location of the SSL key file to use for enabling SSL mode. (string value)
+#key_file = <None>
+
+# Number of workers for Heat service. (integer value)
+# Minimum value: 0
+#workers = 1
+
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated by the
+# Keystone v3 API with big service catalogs). (integer value)
+#max_header_line = 16384
+
+# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds
+# that the connection must be idle before TCP starts sending keepalive probes.
+# (integer value)
+#tcp_keepidle = 600
+
+
+[heat_api_cloudwatch]
+
+#
+# From heat.common.wsgi
+#
+
+# DEPRECATED: Address to bind the server. Useful when selecting a particular
+# network interface. (IP address value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been removed.
+#bind_host = 172.16.10.36
+
+# DEPRECATED: The port on which the server will listen. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been removed.
+#bind_port = 8003
+
+# DEPRECATED: Number of backlog requests to configure the socket with. (integer
+# value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been removed.
+#backlog = 4096
+
+# DEPRECATED: Location of the SSL certificate file to use for SSL mode. (string
+# value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been Removed.
+#cert_file = <None>
+
+# DEPRECATED: Location of the SSL key file to use for enabling SSL mode.
+# (string value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been Removed.
+#key_file = <None>
+
+# DEPRECATED: Number of workers for Heat service. (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been Removed.
+#workers = 1
+
+# DEPRECATED: Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large tokens (typically
+# those generated by the Keystone v3 API with big service catalogs.) (integer
+# value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been Removed.
+#max_header_line = 16384
+
+# DEPRECATED: The value for the socket option TCP_KEEPIDLE.  This is the time
+# in seconds that the connection must be idle before TCP starts sending
+# keepalive probes. (integer value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been Removed.
+#tcp_keepidle = 600
+
+
+[noauth]
+
+#
+# From heat.common.config
+#
+
+# JSON file containing the content returned by the noauth middleware. (string
+# value)
+#token_response =
+
+
+[paste_deploy]
+
+#
+# From heat.common.config
+#
+
+# The flavor to use. (string value)
+#flavor = <None>
+
+# The API paste config file to use. (string value)
+#api_paste_config = api-paste.ini
+
+
+[profiler]
+
+#
+# From heat.common.config
+#
+
+#
+# Enables the profiling for all services on this node. Default value is False
+# (fully disable the profiling feature).
+#
+# Possible values:
+#
+# * True: Enables the feature
+# * False: Disables the feature. The profiling cannot be started via this
+# project
+# operations. If the profiling is triggered by another project, this project
+# part
+# will be empty.
+#  (boolean value)
+# Deprecated group/name - [profiler]/profiler_enabled
+#enabled = false
+
+#
+# Enables SQL requests profiling in services. Default value is False (SQL
+# requests won't be traced).
+#
+# Possible values:
+#
+# * True: Enables SQL requests profiling. Each SQL query will be part of the
+# trace and can the be analyzed by how much time was spent for that.
+# * False: Disables SQL requests profiling. The spent time is only shown on a
+# higher level of operations. Single SQL queries cannot be analyzed this
+# way.
+#  (boolean value)
+#trace_sqlalchemy = false
+
+#
+# Secret key(s) to use for encrypting context data for performance profiling.
+# This string value should have the following format:
+# <key1>[,<key2>,...<keyn>],
+# where each key is some random string. A user who triggers the profiling via
+# the REST API has to set one of these keys in the headers of the REST API call
+# to include profiling results of this node for this particular project.
+#
+# Both "enabled" flag and "hmac_keys" config options should be set to enable
+# profiling. Also, to generate correct profiling information across all
+# services
+# at least one key needs to be consistent between OpenStack projects. This
+# ensures it can be used from client side to generate the trace, containing
+# information from all possible resources. (string value)
+#hmac_keys = SECRET_KEY
+
+#
+# Connection string for a notifier backend. Default value is messaging:// which
+# sets the notifier to oslo_messaging.
+#
+# Examples of possible values:
+#
+# * messaging://: use oslo_messaging driver for sending notifications.
+# * mongodb://127.0.0.1:27017 : use mongodb driver for sending notifications.
+# * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for sending
+# notifications.
+#  (string value)
+#connection_string = messaging://
+
+#
+# Document type for notification indexing in elasticsearch.
+#  (string value)
+#es_doc_type = notification
+
+#
+# This parameter is a time value parameter (for example: es_scroll_time=2m),
+# indicating for how long the nodes that participate in the search will
+# maintain
+# relevant resources in order to continue and support it.
+#  (string value)
+#es_scroll_time = 2m
+
+#
+# Elasticsearch splits large requests in batches. This parameter defines
+# maximum size of each batch (for example: es_scroll_size=10000).
+#  (integer value)
+#es_scroll_size = 10000
+
+#
+# Redissentinel provides a timeout option on the connections.
+# This parameter defines that timeout (for example: socket_timeout=0.1).
+#  (floating point value)
+#socket_timeout = 0.1
+
+#
+# Redissentinel uses a service name to identify a master redis service.
+# This parameter defines the name (for example:
+# sentinal_service_name=mymaster).
+#  (string value)
+#sentinel_service_name = mymaster
+
+#
+# Enable filter traces that contain error/exception to a separated place.
+# Default value is set to False.
+#
+# Possible values:
+#
+# * True: Enable filter traces that contain error/exception.
+# * False: Disable the filter.
+#  (boolean value)
+#filter_error_trace = false
+
+
+[revision]
+
+#
+# From heat.common.config
+#
+
+# Heat build revision. If you would prefer to manage your build revision
+# separately, you can move this section to a different file and add it as
+# another config option. (string value)
+#heat_revision = unknown
+
+
+[trustee]
+
+#
+# From heat.common.context
+#
+
+# Authentication type to load (string value)
+# Deprecated group/name - [trustee]/auth_plugin
+auth_type = password
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Project ID to scope to (string value)
+# Deprecated group/name - [trustee]/tenant_id
+#project_id = <None>
+
+# Project name to scope to (string value)
+# Deprecated group/name - [trustee]/tenant_name
+#project_name = <None>
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used
+# for both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# User id (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [trustee]/user_name
+#username = <None>
+username = heat
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+user_domain_name = default
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+
+[volumes]
+
+#
+# From heat.common.config
+#
+
+# Indicate if cinder-backup service is enabled. This is a temporary workaround
+# until cinder-backup service becomes discoverable, see LP#1334856. (boolean
+# value)
+#backups_enabled = true
+
+[keystone_authtoken]
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
+# Deprecated group/name - [keystone_authtoken]/auth_uri
+#www_authenticate_uri = <None>
+www_authenticate_uri = http://172.16.10.36:5000
+
+# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
+# be an "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. This option
+# is deprecated in favor of www_authenticate_uri and will be removed in the S
+# release. (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
+#auth_uri = <None>
+auth_uri = http://172.16.10.36:5000
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Request environment key where the Swift cache object is stored. When
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [keystone_authtoken]/memcache_servers
+#memcached_servers = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
+
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#hash_algorithms = md5
+
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
+#service_token_roles = service
+
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
+#service_token_roles_required = false
+
+# Authentication type to load (string value)
+# Deprecated group/name - [keystone_authtoken]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = heat
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
 # Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError. (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing outgoing/incoming messages (string value)
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
 # Possible values:
 # json - <No description provided>
 # msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep
-# queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave
-# it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux,
-# milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS
-# default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other
-# negative value and 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received.
-# The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative
-# value and 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.
-# (integer value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries,
-# None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the
-# matchmaker. (list value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq. (string value)
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+[cors]
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain
+# received in the requests "origin" header. Format:
+# "<protocol>://<host>[:<port>]", no trailing slash. Example:
+# https://horizon.example.com (list value)
+
+# Indicate that the actual request can include user credentials
+# (boolean value)
+
+# Indicate which headers are safe to expose to the API. Defaults to
+# HTTP Simple Headers. (list value)
+
+# Maximum cache age of CORS preflight requests. (integer value)
+
+# Indicate which methods can be used during the actual request. (list
+# value)
+
+# Indicate which header field names may be used during the actual
+# request. (list value)
+
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option. (string
-# value)
-#control_exchange = openstack
-
-#
-# From oslo.service.periodic_task
-#
-
-# Some periodic tasks can be run in a separate process. Should we run them here? (boolean value)
-#run_external_periodic_tasks = true
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in
-# listening on the smallest unused port number within the specified range of port numbers.  The chosen port is displayed in the service's
-# log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with
-# 'backdoor_port' in that only one should be provided. If both are provided then the existence of this option overrides the usage of that
-# option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[auth_password]
-
-#
-# From heat.common.config
-#
-
-# Allow orchestration of multiple clouds. (boolean value)
-#multi_cloud = false
-
-# Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least one endpoint needs to be specified. (list value)
-#allowed_auth_uris =
-
-
-[clients]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = publicURL
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = false
-
-
-[clients_aodh]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_barbican]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_cinder]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-# Allow client's debug log output. (boolean value)
-#http_log_debug = false
-
-
-[clients_designate]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_glance]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_heat]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-# Optional heat url in format like http://0.0.0.0:8004/v1/%(tenant_id)s. (string value)
-#url =
-
-
-[clients_keystone]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-# Unversioned keystone url in format like http://0.0.0.0:5000. (string value)
-#auth_uri =
-
-
-[clients_magnum]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_manila]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_mistral]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_monasca]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_neutron]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_nova]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-# Allow client's debug log output. (boolean value)
-#http_log_debug = false
-
-
-[clients_octavia]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_sahara]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_senlin]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_swift]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_trove]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_zaqar]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[cors]
-
-#
-# From oslo.middleware
-#
-
-# Indicate whether this resource may be shared with the domain received in the requests "origin" header. Format:
-# "<protocol>://<host>[:<port>]", no trailing slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request. (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
 
 [database]
-
 #
 # From oslo.db
 #
@@ -1024,23 +2136,29 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection=sqlite:////var/lib/heat/heatdb
-
-# The SQLAlchemy connection string to use to connect to the slave database. (string value)
+#connection = <None>
+connection = mysql+pymysql://heat:opnfv_secret@172.16.10.36/heat?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL
-# mode is set by the server configuration, set this to no value. Example: mysql_sql_mode= (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB). (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
 # time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
@@ -1048,36 +2166,45 @@
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 280
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -1087,1272 +2214,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost. (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
 # (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-
-[ec2authtoken]
-
-#
-# From heat.api.aws.ec2token
-#
-
-# Authentication Endpoint URI. (string value)
-#auth_uri = <None>
-
-# Allow orchestration of multiple clouds. (boolean value)
-#multi_cloud = false
-
-# Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least one endpoint needs to be specified. (list value)
-#allowed_auth_uris =
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_policy]
+
+[ssl]
+#
+# From oslo.service.sslutils
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
 #ca_file = <None>
 
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = false
-
-
-[eventlet_opts]
-
-#
-# From heat.common.wsgi
-#
-
-# If False, closes the client socket connection explicitly. (boolean value)
-#wsgi_keep_alive = true
-
-# Timeout for client connections' socket operations. If an incoming connection is idle for this number of seconds it will be closed. A value
-# of '0' means wait forever. (integer value)
-#client_socket_timeout = 900
-
-
-[healthcheck]
-
-#
-# From oslo.middleware
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application is running on a port. Expects a "port:path" list of strings.
-# Used by DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
-[heat_api]
-
-#
-# From heat.common.wsgi
-#
-
-# Address to bind the server. Useful when selecting a particular network interface. (IP address value)
-#bind_host = 0.0.0.0
-
-# The port on which the server will listen. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#bind_port = 8004
-
-# Number of backlog requests to configure the socket with. (integer value)
-#backlog = 4096
-
-# Location of the SSL certificate file to use for SSL mode. (string value)
-#cert_file = <None>
-
-# Location of the SSL key file to use for enabling SSL mode. (string value)
-#key_file = <None>
-
-# Number of workers for Heat service. Default value 0 means, that service will start number of workers equal number of cores on server.
-# (integer value)
-# Minimum value: 0
-#workers = 0
-
-# Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those
-# generated by the Keystone v3 API with big service catalogs). (integer value)
-#max_header_line = 16384
-
-# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds that the connection must be idle before TCP starts sending
-# keepalive probes. (integer value)
-#tcp_keepidle = 600
-
-
-[heat_api_cfn]
-
-#
-# From heat.common.wsgi
-#
-
-# Address to bind the server. Useful when selecting a particular network interface. (IP address value)
-#bind_host = 0.0.0.0
-
-# The port on which the server will listen. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#bind_port = 8000
-
-# Number of backlog requests to configure the socket with. (integer value)
-#backlog = 4096
-
-# Location of the SSL certificate file to use for SSL mode. (string value)
-#cert_file = <None>
-
-# Location of the SSL key file to use for enabling SSL mode. (string value)
-#key_file = <None>
-
-# Number of workers for Heat service. (integer value)
-# Minimum value: 0
-#workers = 1
-
-# Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those
-# generated by the Keystone v3 API with big service catalogs). (integer value)
-#max_header_line = 16384
-
-# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds that the connection must be idle before TCP starts sending
-# keepalive probes. (integer value)
-#tcp_keepidle = 600
-
-
-[heat_api_cloudwatch]
-
-#
-# From heat.common.wsgi
-#
-
-# DEPRECATED: Address to bind the server. Useful when selecting a particular network interface. (IP address value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been removed.
-#bind_host = 0.0.0.0
-
-# DEPRECATED: The port on which the server will listen. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been removed.
-#bind_port = 8003
-
-# DEPRECATED: Number of backlog requests to configure the socket with. (integer value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been removed.
-#backlog = 4096
-
-# DEPRECATED: Location of the SSL certificate file to use for SSL mode. (string value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been Removed.
-#cert_file = <None>
-
-# DEPRECATED: Location of the SSL key file to use for enabling SSL mode. (string value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been Removed.
-#key_file = <None>
-
-# DEPRECATED: Number of workers for Heat service. (integer value)
-# Minimum value: 0
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been Removed.
-#workers = 1
-
-# DEPRECATED: Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens
-# (typically those generated by the Keystone v3 API with big service catalogs.) (integer value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been Removed.
-#max_header_line = 16384
-
-# DEPRECATED: The value for the socket option TCP_KEEPIDLE.  This is the time in seconds that the connection must be idle before TCP starts
-# sending keepalive probes. (integer value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been Removed.
-#tcp_keepidle = 600
-
-
-[keystone_authtoken]
-#
-# Re-added by openstack-pkg-tools
-#
-
-
-# Complete "admin" Identity API endpoint.
-auth_url = http://localhost:35357
-
-# Project name for auth.
-project_name = service
-
-# Project's domain name for auth.
-project_domain_name = default
-
-# Username for auth.
-username = heat
-
-# User's domain name for auth
-user_domain_name = default
-
-# Password for auth
-#password =
-
-#
-# From keystonemiddleware.auth_token
-#
-
-# Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client
-# support in the wild varies. If you're using a versioned v2 endpoint here, then this should *not* be the same endpoint the service user
-# utilizes for validating tokens, because normal end users may not be able to reach that endpoint. (string value)
-# Deprecated group/name - [keystone_authtoken]/auth_uri
-www_authenticate_uri = http://localhost:5000
-
-# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all
-# end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned,
-# client support in the wild varies. If you're using a versioned v2 endpoint here, then this should *not* be the same endpoint the service
-# user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor
-# of www_authenticate_uri and will be removed in the S release. (string value)
-# This option is deprecated for removal since Queens.
-# Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S  release.
-#auth_uri = <None>
-
-# API version of the admin Identity API endpoint. (string value)
-#auth_version = <None>
-
-# Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.
-# (boolean value)
-#delay_auth_decision = false
-
-# Request timeout value for communicating with Identity API server. (integer value)
-#http_connect_timeout = <None>
-
-# How many times are we trying to reconnect when communicating with Identity API Server. (integer value)
-#http_request_max_retries = 3
-
-# Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option
-# to have the middleware share a caching backend with swift. Otherwise, use the ``memcached_servers`` option instead. (string value)
-#cache = <None>
-
-# Required if identity server requires client certificate (string value)
-#certfile = <None>
-
-# Required if identity server requires client certificate (string value)
-#keyfile = <None>
-
-# A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs. (string value)
-#cafile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# The region in which the identity server can be found. (string value)
-region_name = regionOne
-
-# DEPRECATED: Directory used to cache files related to PKI tokens. This option has been deprecated in the Ocata release and will be removed
-# in the P release. (string value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#signing_dir = <None>
-
-# Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process. (list
-# value)
-# Deprecated group/name - [keystone_authtoken]/memcache_servers
-#memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in
-# seconds). Set to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is retrieved from the Identity service (in seconds). A high
-# number of revocation events combined with a low cache duration may significantly reduce performance. Only valid for PKI tokens. This
-# option has been deprecated in the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is
-# authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of
-# these options or empty, auth_token will raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead before it is tried again. (integer value)
-#memcache_pool_dead_retry = 300
-
-# (Optional) Maximum total number of open connections to every memcached server. (integer value)
-#memcache_pool_maxsize = 10
-
-# (Optional) Socket timeout in seconds for communicating with a memcached server. (integer value)
-#memcache_pool_socket_timeout = 3
-
-# (Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed. (integer value)
-#memcache_pool_unused_timeout = 60
-
-# (Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool. (integer value)
-#memcache_pool_conn_get_timeout = 10
-
-# (Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x. (boolean value)
-#memcache_use_advanced_pool = false
-
-# (Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation
-# and will not set the X-Service-Catalog header. (boolean value)
-#include_service_catalog = true
-
-# Used to control the use and type of token binding. Can be set to: "disabled" to not check token binding. "permissive" (default) to
-# validate binding information if the bind type is of a form known to the server and ignore it if not. "strict" like "permissive" but if the
-# bind type is unknown the token will be rejected. "required" any form of token binding is needed to be allowed. Finally the name of a
-# binding method that must be present in tokens. (string value)
-#enforce_token_bind = permissive
-
-# DEPRECATED: If true, the revocation list will be checked for cached tokens. This requires that PKI tokens are configured on the identity
-# server. (boolean value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#check_revocations_for_cached = false
-
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those supported
-# by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one first for performance. The result
-# of the first hash will be stored in the cache. This will typically be set to multiple values only while migrating from a less secure
-# algorithm to a more secure one. Once all the old tokens are expired this option should be set to a single value for better performance.
-# (list value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#hash_algorithms = md5
-
-# A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so
-# this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any
-# role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check. (list value)
-#service_token_roles = service
-
-# For backwards compatibility reasons we must let valid service tokens pass that don't pass the service_token_roles check as valid. Setting
-# this true will become the default in a future release and should be enabled if possible. (boolean value)
-#service_token_roles_required = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [keystone_authtoken]/auth_plugin
-auth_type = password
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g., [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[noauth]
-
-#
-# From heat.common.config
-#
-
-# JSON file containing the content returned by the noauth middleware. (string value)
-#token_response =
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system's CA-bundle to verify the server's
-# certificate. (boolean value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the hostname in the transport_url. In some configurations it may
-# be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to
-# provide a certificate per virtual host. Set ssl_verify_vhost to True if the server's SSL certificate uses the virtual host name instead of
-# the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the
-# virtual host name will be added to all message bus addresses, effectively creating a private 'subnet' per virtual host. Set to False if
-# the message bus supports virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative as the name of the virtual host.
-# (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to
-# a single destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered
-# in a round-robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC. (string
-# value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1
-# - indefinite (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on
-# some distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future
-# versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.
-# (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if
-# more than one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds. (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
-# queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues
-# (except those with auto-generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-mode":
-# "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are
-# automatically deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL
-# (integer value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or resolve to this address.
-# (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite
-# linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed.
-# Positive values specify an upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target. (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct
-# connections for direct message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.
-# (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError. (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep
-# queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave
-# it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux,
-# milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS
-# default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other
-# negative value and 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received.
-# The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative
-# value and 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.
-# (integer value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries,
-# None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the
-# matchmaker. (list value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware
-#
-
-# The maximum body size for each  request, in bytes. (integer value)
-# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
-# Deprecated group/name - [DEFAULT]/max_request_body_size
-#max_request_body_size = 114688
-
-# DEPRECATED: The HTTP Header that will be used to determine what the original request protocol scheme was, even if it was hidden by a SSL
-# termination proxy. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#secure_proxy_ssl_header = X-Forwarded-Proto
-
-# Whether the application is behind a proxy or not. This determines if the middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating policies. If ``True``, the scope of the token used in the request is
-# compared to the ``scope_types`` of the policy being enforced. If the scopes do not match, an ``InvalidScope`` exception will be raised. If
-# ``False``, a message will be logged informing operators that policies are being invoked with mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the
-# config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched.  Missing or empty
-# directories are ignored. (multi valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[paste_deploy]
-
-#
-# From heat.common.config
-#
-
-# The flavor to use. (string value)
-#flavor = <None>
-
-# The API paste config file to use. (string value)
-#api_paste_config = api-paste.ini
-
-
-[profiler]
-
-#
-# From heat.common.config
-#
-
-#
-# Enable the profiling for all services on this node.
-#
-# Default value is False (fully disable the profiling feature).
-#
-# Possible values:
-#
-# * True: Enables the feature
-# * False: Disables the feature. The profiling cannot be started via this project
-#   operations. If the profiling is triggered by another project, this project
-#   part will be empty.
-#  (boolean value)
-# Deprecated group/name - [profiler]/profiler_enabled
-#enabled = false
-
-#
-# Enable SQL requests profiling in services.
-#
-# Default value is False (SQL requests won't be traced).
-#
-# Possible values:
-#
-# * True: Enables SQL requests profiling. Each SQL query will be part of the
-#   trace and can the be analyzed by how much time was spent for that.
-# * False: Disables SQL requests profiling. The spent time is only shown on a
-#   higher level of operations. Single SQL queries cannot be analyzed this way.
-#  (boolean value)
-#trace_sqlalchemy = false
-
-#
-# Secret key(s) to use for encrypting context data for performance profiling.
-#
-# This string value should have the following format: <key1>[,<key2>,...<keyn>],
-# where each key is some random string. A user who triggers the profiling via
-# the REST API has to set one of these keys in the headers of the REST API call
-# to include profiling results of this node for this particular project.
-#
-# Both "enabled" flag and "hmac_keys" config options should be set to enable
-# profiling. Also, to generate correct profiling information across all services
-# at least one key needs to be consistent between OpenStack projects. This
-# ensures it can be used from client side to generate the trace, containing
-# information from all possible resources.
-#  (string value)
-#hmac_keys = SECRET_KEY
-
-#
-# Connection string for a notifier backend.
-#
-# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
-#
-# Examples of possible values:
-#
-# * ``messaging://`` - use oslo_messaging driver for sending spans.
-# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
-# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
-# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
-#   spans.
-# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending spans.
-#  (string value)
-#connection_string = messaging://
-
-#
-# Document type for notification indexing in elasticsearch.
-#  (string value)
-#es_doc_type = notification
-
-#
-# This parameter is a time value parameter (for example: es_scroll_time=2m),
-# indicating for how long the nodes that participate in the search will maintain
-# relevant resources in order to continue and support it.
-#  (string value)
-#es_scroll_time = 2m
-
-#
-# Elasticsearch splits large requests in batches. This parameter defines
-# maximum size of each batch (for example: es_scroll_size=10000).
-#  (integer value)
-#es_scroll_size = 10000
-
-#
-# Redissentinel provides a timeout option on the connections.
-# This parameter defines that timeout (for example: socket_timeout=0.1).
-#  (floating point value)
-#socket_timeout = 0.1
-
-#
-# Redissentinel uses a service name to identify a master redis service.
-# This parameter defines the name (for example:
-# ``sentinal_service_name=mymaster``).
-#  (string value)
-#sentinel_service_name = mymaster
-
-#
-# Enable filter traces that contain error/exception to a separated place.
-#
-# Default value is set to False.
-#
-# Possible values:
-#
-# * True: Enable filter traces that contain error/exception.
-# * False: Disable the filter.
-#  (boolean value)
-#filter_error_trace = false
-
-
-[revision]
-
-#
-# From heat.common.config
-#
-
-# Heat build revision. If you would prefer to manage your build revision separately, you can move this section to a different file and add
-# it as another config option. (string value)
-#heat_revision = unknown
-
-
-[trustee]
-
-#
-# From heat.common.context
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [trustee]/auth_plugin
-auth_type = password
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-# Authentication URL (string value)
-#auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [trustee]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [trustee]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
-
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2
-# authentication. (string value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2
-# authentication. (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [trustee]/user_name
-#username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-user_domain_name = default
-
-# User's password (string value)
-#password = <None>
-
-
-[volumes]
-
-#
-# From heat.common.config
-#
-
-# Indicate if cinder-backup service is enabled. This is a temporary workaround until cinder-backup service becomes discoverable, see
-# LP#1334856. (boolean value)
-#backups_enabled = true
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#cert_file = <None>
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#key_file = <None>
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+#version = <None>
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
+#ciphers = <None>

2019-11-21 06:35:48,052 [salt.state       :1951][INFO    ][2525] Completed state [/etc/heat/heat.conf] at time 06:35:48.052319 duration_in_ms=387.563
2019-11-21 06:35:48,053 [salt.state       :1780][INFO    ][2525] Running state [heat-manage db_sync] at time 06:35:48.053421
2019-11-21 06:35:48,053 [salt.state       :1813][INFO    ][2525] Executing state cmd.run for [heat-manage db_sync]
2019-11-21 06:35:48,054 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command 'heat-manage db_sync' in directory '/root'
2019-11-21 06:35:51,588 [salt.state       :300 ][INFO    ][2525] {'pid': 4998, 'retcode': 0, 'stderr': '', 'stdout': '2019-11-21 06:35:50.544 4999 INFO migrate.versioning.api [-] 70 -> 71... \x1b[00m\n2019-11-21 06:35:50.926 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:50.927 4999 INFO migrate.versioning.api [-] 71 -> 72... \x1b[00m\n2019-11-21 06:35:50.978 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:50.979 4999 INFO migrate.versioning.api [-] 72 -> 73... \x1b[00m\n2019-11-21 06:35:51.031 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.031 4999 INFO migrate.versioning.api [-] 73 -> 74... \x1b[00m\n2019-11-21 06:35:51.037 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.037 4999 INFO migrate.versioning.api [-] 74 -> 75... \x1b[00m\n2019-11-21 06:35:51.042 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.043 4999 INFO migrate.versioning.api [-] 75 -> 76... \x1b[00m\n2019-11-21 06:35:51.048 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.048 4999 INFO migrate.versioning.api [-] 76 -> 77... \x1b[00m\n2019-11-21 06:35:51.059 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.059 4999 INFO migrate.versioning.api [-] 77 -> 78... \x1b[00m\n2019-11-21 06:35:51.072 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.072 4999 INFO migrate.versioning.api [-] 78 -> 79... \x1b[00m\n2019-11-21 06:35:51.214 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.214 4999 INFO migrate.versioning.api [-] 79 -> 80... \x1b[00m\n2019-11-21 06:35:51.349 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.349 4999 INFO migrate.versioning.api [-] 80 -> 81... \x1b[00m\n2019-11-21 06:35:51.355 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.355 4999 INFO migrate.versioning.api [-] 81 -> 82... \x1b[00m\n2019-11-21 06:35:51.360 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.361 4999 INFO migrate.versioning.api [-] 82 -> 83... \x1b[00m\n2019-11-21 06:35:51.367 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.367 4999 INFO migrate.versioning.api [-] 83 -> 84... \x1b[00m\n2019-11-21 06:35:51.377 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.377 4999 INFO migrate.versioning.api [-] 84 -> 85... \x1b[00m\n2019-11-21 06:35:51.388 4999 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:35:51.389 4999 INFO migrate.versioning.api [-] 85 -> 86... \x1b[00m\n2019-11-21 06:35:51.489 4999 INFO migrate.versioning.api [-] done\x1b[00m'}
2019-11-21 06:35:51,589 [salt.state       :1951][INFO    ][2525] Completed state [heat-manage db_sync] at time 06:35:51.589000 duration_in_ms=3535.578
2019-11-21 06:35:51,589 [salt.state       :1780][INFO    ][2525] Running state [/etc/heat/api-paste.ini] at time 06:35:51.589805
2019-11-21 06:35:51,590 [salt.state       :1813][INFO    ][2525] Executing state file.managed for [/etc/heat/api-paste.ini]
2019-11-21 06:35:51,608 [salt.fileclient  :1219][INFO    ][2525] Fetching file from saltenv 'base', ** done ** 'heat/files/rocky/api-paste.ini'
2019-11-21 06:35:51,623 [salt.state       :300 ][INFO    ][2525] File changed:
--- 
+++ 
@@ -1,7 +1,7 @@
 
 # heat-api pipeline
 [pipeline:heat-api]
-pipeline = cors request_id faultwrap http_proxy_to_wsgi versionnegotiation authurl authtoken context osprofiler apiv1app
+pipeline = cors request_id faultwrap http_proxy_to_wsgi versionnegotiation osprofiler authurl authtoken context apiv1app
 
 # heat-api pipeline for standalone heat
 # ie. uses alternative auth backend that authenticates users against keystone
@@ -20,23 +20,23 @@
 #   flavor = custombackend
 #
 [pipeline:heat-api-custombackend]
-pipeline = cors request_id context faultwrap versionnegotiation custombackendauth apiv1app
+pipeline = cors request_id faultwrap versionnegotiation context custombackendauth apiv1app
 
 # To enable, in heat.conf:
 #   [paste_deploy]
 #   flavor = noauth
 #
 [pipeline:heat-api-noauth]
-pipeline = cors request_id faultwrap noauth context http_proxy_to_wsgi versionnegotiation apiv1app
+pipeline = cors request_id faultwrap http_proxy_to_wsgi versionnegotiation noauth context apiv1app
 
 # heat-api-cfn pipeline
 [pipeline:heat-api-cfn]
-pipeline = cors request_id http_proxy_to_wsgi cfnversionnegotiation ec2authtoken authtoken context osprofiler apicfnv1app
+pipeline = cors http_proxy_to_wsgi cfnversionnegotiation osprofiler ec2authtoken authtoken context apicfnv1app
 
 # heat-api-cfn pipeline for standalone heat
 # relies exclusively on authenticating with ec2 signed requests
 [pipeline:heat-api-cfn-standalone]
-pipeline = cors request_id http_proxy_to_wsgi cfnversionnegotiation ec2authtoken context apicfnv1app
+pipeline = cors http_proxy_to_wsgi cfnversionnegotiation ec2authtoken context apicfnv1app
 
 [app:apiv1app]
 paste.app_factory = heat.common.wsgi:app_factory

2019-11-21 06:35:51,624 [salt.state       :1951][INFO    ][2525] Completed state [/etc/heat/api-paste.ini] at time 06:35:51.623950 duration_in_ms=34.145
2019-11-21 06:35:51,624 [salt.state       :1780][INFO    ][2525] Running state [/etc/default/heat-api] at time 06:35:51.624398
2019-11-21 06:35:51,624 [salt.state       :1813][INFO    ][2525] Executing state file.managed for [/etc/default/heat-api]
2019-11-21 06:35:51,644 [salt.fileclient  :1219][INFO    ][2525] Fetching file from saltenv 'base', ** done ** 'heat/files/default'
2019-11-21 06:35:51,654 [salt.state       :300 ][INFO    ][2525] File changed:
New file
2019-11-21 06:35:51,654 [salt.state       :1951][INFO    ][2525] Completed state [/etc/default/heat-api] at time 06:35:51.654782 duration_in_ms=30.383
2019-11-21 06:35:51,655 [salt.state       :1780][INFO    ][2525] Running state [/etc/default/heat-api-cfn] at time 06:35:51.655336
2019-11-21 06:35:51,655 [salt.state       :1813][INFO    ][2525] Executing state file.managed for [/etc/default/heat-api-cfn]
2019-11-21 06:35:51,677 [salt.state       :300 ][INFO    ][2525] File changed:
New file
2019-11-21 06:35:51,678 [salt.state       :1951][INFO    ][2525] Completed state [/etc/default/heat-api-cfn] at time 06:35:51.678122 duration_in_ms=22.786
2019-11-21 06:35:51,678 [salt.state       :1780][INFO    ][2525] Running state [/etc/default/heat-engine] at time 06:35:51.678572
2019-11-21 06:35:51,678 [salt.state       :1813][INFO    ][2525] Executing state file.managed for [/etc/default/heat-engine]
2019-11-21 06:35:51,721 [salt.state       :300 ][INFO    ][2525] File changed:
New file
2019-11-21 06:35:51,722 [salt.state       :1951][INFO    ][2525] Completed state [/etc/default/heat-engine] at time 06:35:51.722064 duration_in_ms=43.491
2019-11-21 06:35:51,724 [salt.state       :1780][INFO    ][2525] Running state [chown heat:heat /var/log/heat/ -R] at time 06:35:51.724696
2019-11-21 06:35:51,725 [salt.state       :1813][INFO    ][2525] Executing state cmd.run for [chown heat:heat /var/log/heat/ -R]
2019-11-21 06:35:51,725 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command 'chown heat:heat /var/log/heat/ -R' in directory '/root'
2019-11-21 06:35:51,750 [salt.state       :300 ][INFO    ][2525] {'pid': 5064, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:35:51,751 [salt.state       :1951][INFO    ][2525] Completed state [chown heat:heat /var/log/heat/ -R] at time 06:35:51.751337 duration_in_ms=26.641
2019-11-21 06:35:51,754 [salt.state       :1780][INFO    ][2525] Running state [heat-api] at time 06:35:51.754595
2019-11-21 06:35:51,755 [salt.state       :1813][INFO    ][2525] Executing state service.running for [heat-api]
2019-11-21 06:35:51,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'status', 'heat-api.service', '-n', '0'] in directory '/root'
2019-11-21 06:35:51,776 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'is-active', 'heat-api.service'] in directory '/root'
2019-11-21 06:35:51,794 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'is-enabled', 'heat-api.service'] in directory '/root'
2019-11-21 06:35:51,809 [salt.state       :300 ][INFO    ][2525] The service heat-api is already running
2019-11-21 06:35:51,810 [salt.state       :1951][INFO    ][2525] Completed state [heat-api] at time 06:35:51.810263 duration_in_ms=55.667
2019-11-21 06:35:51,810 [salt.state       :1780][INFO    ][2525] Running state [heat-api] at time 06:35:51.810539
2019-11-21 06:35:51,810 [salt.state       :1813][INFO    ][2525] Executing state service.mod_watch for [heat-api]
2019-11-21 06:35:51,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'is-active', 'heat-api.service'] in directory '/root'
2019-11-21 06:35:51,831 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-api.service'] in directory '/root'
2019-11-21 06:35:51,872 [salt.state       :300 ][INFO    ][2525] {'heat-api': True}
2019-11-21 06:35:51,873 [salt.state       :1951][INFO    ][2525] Completed state [heat-api] at time 06:35:51.873224 duration_in_ms=62.683
2019-11-21 06:35:51,875 [salt.state       :1780][INFO    ][2525] Running state [heat-api-cfn] at time 06:35:51.875426
2019-11-21 06:35:51,875 [salt.state       :1813][INFO    ][2525] Executing state service.running for [heat-api-cfn]
2019-11-21 06:35:51,876 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'status', 'heat-api-cfn.service', '-n', '0'] in directory '/root'
2019-11-21 06:35:51,903 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'is-active', 'heat-api-cfn.service'] in directory '/root'
2019-11-21 06:35:51,923 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'is-enabled', 'heat-api-cfn.service'] in directory '/root'
2019-11-21 06:35:51,939 [salt.state       :300 ][INFO    ][2525] The service heat-api-cfn is already running
2019-11-21 06:35:51,940 [salt.state       :1951][INFO    ][2525] Completed state [heat-api-cfn] at time 06:35:51.940202 duration_in_ms=64.776
2019-11-21 06:35:51,940 [salt.state       :1780][INFO    ][2525] Running state [heat-api-cfn] at time 06:35:51.940572
2019-11-21 06:35:51,941 [salt.state       :1813][INFO    ][2525] Executing state service.mod_watch for [heat-api-cfn]
2019-11-21 06:35:51,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'is-active', 'heat-api-cfn.service'] in directory '/root'
2019-11-21 06:35:51,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-api-cfn.service'] in directory '/root'
2019-11-21 06:35:51,986 [salt.state       :300 ][INFO    ][2525] {'heat-api-cfn': True}
2019-11-21 06:35:51,987 [salt.state       :1951][INFO    ][2525] Completed state [heat-api-cfn] at time 06:35:51.987208 duration_in_ms=46.636
2019-11-21 06:35:51,988 [salt.state       :1780][INFO    ][2525] Running state [heat-engine] at time 06:35:51.988569
2019-11-21 06:35:51,988 [salt.state       :1813][INFO    ][2525] Executing state service.running for [heat-engine]
2019-11-21 06:35:51,993 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'status', 'heat-engine.service', '-n', '0'] in directory '/root'
2019-11-21 06:35:52,018 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'is-active', 'heat-engine.service'] in directory '/root'
2019-11-21 06:35:52,034 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'is-enabled', 'heat-engine.service'] in directory '/root'
2019-11-21 06:35:52,049 [salt.state       :300 ][INFO    ][2525] The service heat-engine is already running
2019-11-21 06:35:52,049 [salt.state       :1951][INFO    ][2525] Completed state [heat-engine] at time 06:35:52.049626 duration_in_ms=61.057
2019-11-21 06:35:52,049 [salt.state       :1780][INFO    ][2525] Running state [heat-engine] at time 06:35:52.049937
2019-11-21 06:35:52,050 [salt.state       :1813][INFO    ][2525] Executing state service.mod_watch for [heat-engine]
2019-11-21 06:35:52,051 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemctl', 'is-active', 'heat-engine.service'] in directory '/root'
2019-11-21 06:35:52,070 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2525] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-engine.service'] in directory '/root'
2019-11-21 06:35:52,248 [salt.state       :300 ][INFO    ][2525] {'heat-engine': True}
2019-11-21 06:35:52,248 [salt.state       :1951][INFO    ][2525] Completed state [heat-engine] at time 06:35:52.248810 duration_in_ms=198.873
2019-11-21 06:35:52,260 [salt.minion      :1711][INFO    ][2525] Returning information for job: 20191121063507593808
2019-11-21 06:35:52,816 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121063552805107
2019-11-21 06:35:52,834 [salt.minion      :1432][INFO    ][5230] Starting a new job with PID 5230
2019-11-21 06:35:59,327 [salt.state       :915 ][INFO    ][5230] Loading fresh modules for state activity
2019-11-21 06:35:59,386 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/init.sls'
2019-11-21 06:35:59,418 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/controller.sls'
2019-11-21 06:35:59,644 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/user.sls'
2019-11-21 06:36:00,351 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/db/offline_sync.sls'
2019-11-21 06:36:00,434 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/_ssl/controller_mysql.sls'
2019-11-21 06:36:00,529 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/_ssl/rabbitmq.sls'
2019-11-21 06:36:00,639 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/volume.sls'
2019-11-21 06:36:01,744 [keyring.backend  :154 ][INFO    ][5230] Loading Windows (alt)
2019-11-21 06:36:01,747 [keyring.backend  :154 ][INFO    ][5230] Loading pyfs
2019-11-21 06:36:01,748 [keyring.backend  :154 ][INFO    ][5230] Loading multi
2019-11-21 06:36:01,749 [keyring.backend  :154 ][INFO    ][5230] Loading Google
2019-11-21 06:36:01,750 [keyring.backend  :154 ][INFO    ][5230] Loading Gnome
2019-11-21 06:36:01,754 [keyring.backend  :154 ][INFO    ][5230] Loading keyczar
2019-11-21 06:36:01,754 [keyring.backend  :154 ][INFO    ][5230] Loading file
2019-11-21 06:36:01,755 [keyring.backend  :154 ][INFO    ][5230] Loading kwallet
2019-11-21 06:36:02,629 [salt.state       :1780][INFO    ][5230] Running state [apache2] at time 06:36:02.629316
2019-11-21 06:36:02,629 [salt.state       :1813][INFO    ][5230] Executing state pkg.installed for [apache2]
2019-11-21 06:36:02,630 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:36:03,060 [salt.state       :300 ][INFO    ][5230] All specified packages are already installed
2019-11-21 06:36:03,060 [salt.state       :1951][INFO    ][5230] Completed state [apache2] at time 06:36:03.060563 duration_in_ms=431.248
2019-11-21 06:36:03,060 [salt.state       :1780][INFO    ][5230] Running state [openssl] at time 06:36:03.060917
2019-11-21 06:36:03,061 [salt.state       :1813][INFO    ][5230] Executing state pkg.installed for [openssl]
2019-11-21 06:36:03,070 [salt.state       :300 ][INFO    ][5230] All specified packages are already installed
2019-11-21 06:36:03,070 [salt.state       :1951][INFO    ][5230] Completed state [openssl] at time 06:36:03.070661 duration_in_ms=9.744
2019-11-21 06:36:03,071 [salt.state       :1780][INFO    ][5230] Running state [a2enmod ssl] at time 06:36:03.071386
2019-11-21 06:36:03,071 [salt.state       :1813][INFO    ][5230] Executing state cmd.run for [a2enmod ssl]
2019-11-21 06:36:03,072 [salt.state       :300 ][INFO    ][5230] /etc/apache2/mods-enabled/ssl.load exists
2019-11-21 06:36:03,072 [salt.state       :1951][INFO    ][5230] Completed state [a2enmod ssl] at time 06:36:03.072211 duration_in_ms=0.825
2019-11-21 06:36:03,072 [salt.state       :1780][INFO    ][5230] Running state [a2enmod rewrite] at time 06:36:03.072768
2019-11-21 06:36:03,073 [salt.state       :1813][INFO    ][5230] Executing state cmd.run for [a2enmod rewrite]
2019-11-21 06:36:03,073 [salt.state       :300 ][INFO    ][5230] /etc/apache2/mods-enabled/rewrite.load exists
2019-11-21 06:36:03,073 [salt.state       :1951][INFO    ][5230] Completed state [a2enmod rewrite] at time 06:36:03.073589 duration_in_ms=0.82
2019-11-21 06:36:03,074 [salt.state       :1780][INFO    ][5230] Running state [libapache2-mod-wsgi] at time 06:36:03.074145
2019-11-21 06:36:03,074 [salt.state       :1813][INFO    ][5230] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-11-21 06:36:03,083 [salt.state       :300 ][INFO    ][5230] All specified packages are already installed
2019-11-21 06:36:03,083 [salt.state       :1951][INFO    ][5230] Completed state [libapache2-mod-wsgi] at time 06:36:03.083432 duration_in_ms=9.287
2019-11-21 06:36:03,084 [salt.state       :1780][INFO    ][5230] Running state [a2enmod wsgi] at time 06:36:03.084005
2019-11-21 06:36:03,084 [salt.state       :1813][INFO    ][5230] Executing state cmd.run for [a2enmod wsgi]
2019-11-21 06:36:03,084 [salt.state       :300 ][INFO    ][5230] /etc/apache2/mods-enabled/wsgi.load exists
2019-11-21 06:36:03,084 [salt.state       :1951][INFO    ][5230] Completed state [a2enmod wsgi] at time 06:36:03.084792 duration_in_ms=0.787
2019-11-21 06:36:03,085 [salt.state       :1780][INFO    ][5230] Running state [a2enmod status -q] at time 06:36:03.085365
2019-11-21 06:36:03,085 [salt.state       :1813][INFO    ][5230] Executing state cmd.run for [a2enmod status -q]
2019-11-21 06:36:03,085 [salt.state       :300 ][INFO    ][5230] /etc/apache2/mods-enabled/status.load exists
2019-11-21 06:36:03,086 [salt.state       :1951][INFO    ][5230] Completed state [a2enmod status -q] at time 06:36:03.086152 duration_in_ms=0.787
2019-11-21 06:36:03,089 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:36:03.089653
2019-11-21 06:36:03,089 [salt.state       :1813][INFO    ][5230] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-11-21 06:36:03,090 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-11-21 06:36:03,090 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:36:03.090530 duration_in_ms=0.877
2019-11-21 06:36:03,090 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:36:03.090766
2019-11-21 06:36:03,091 [salt.state       :1813][INFO    ][5230] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-11-21 06:36:03,091 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-11-21 06:36:03,091 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:36:03.091481 duration_in_ms=0.716
2019-11-21 06:36:03,091 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:36:03.091712
2019-11-21 06:36:03,091 [salt.state       :1813][INFO    ][5230] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-11-21 06:36:03,092 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-11-21 06:36:03,092 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:36:03.092429 duration_in_ms=0.717
2019-11-21 06:36:03,092 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:36:03.092654
2019-11-21 06:36:03,092 [salt.state       :1813][INFO    ][5230] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-11-21 06:36:03,093 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-11-21 06:36:03,093 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:36:03.093372 duration_in_ms=0.717
2019-11-21 06:36:03,096 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 06:36:03.096055
2019-11-21 06:36:03,096 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-11-21 06:36:03,168 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-11-21 06:36:03,168 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 06:36:03.168467 duration_in_ms=72.411
2019-11-21 06:36:03,169 [salt.state       :1780][INFO    ][5230] Running state [a2enmod mpm_event] at time 06:36:03.169635
2019-11-21 06:36:03,169 [salt.state       :1813][INFO    ][5230] Executing state cmd.run for [a2enmod mpm_event]
2019-11-21 06:36:03,170 [salt.state       :300 ][INFO    ][5230] /etc/apache2/mods-enabled/mpm_event.load exists
2019-11-21 06:36:03,170 [salt.state       :1951][INFO    ][5230] Completed state [a2enmod mpm_event] at time 06:36:03.170445 duration_in_ms=0.809
2019-11-21 06:36:03,171 [salt.state       :1780][INFO    ][5230] Running state [apache_server_service_task] at time 06:36:03.171210
2019-11-21 06:36:03,171 [salt.state       :1813][INFO    ][5230] Executing state test.show_notification for [apache_server_service_task]
2019-11-21 06:36:03,171 [salt.state       :300 ][INFO    ][5230] Running apache.server.service
2019-11-21 06:36:03,171 [salt.state       :1951][INFO    ][5230] Completed state [apache_server_service_task] at time 06:36:03.171901 duration_in_ms=0.691
2019-11-21 06:36:03,172 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/ports.conf] at time 06:36:03.172462
2019-11-21 06:36:03,172 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/apache2/ports.conf]
2019-11-21 06:36:03,238 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/ports.conf is in the correct state
2019-11-21 06:36:03,238 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/ports.conf] at time 06:36:03.238428 duration_in_ms=65.966
2019-11-21 06:36:03,239 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/conf-available/security.conf] at time 06:36:03.239017
2019-11-21 06:36:03,239 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-11-21 06:36:03,304 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/conf-available/security.conf is in the correct state
2019-11-21 06:36:03,304 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/conf-available/security.conf] at time 06:36:03.304331 duration_in_ms=65.314
2019-11-21 06:36:03,318 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 06:36:03.318461
2019-11-21 06:36:03,318 [salt.state       :1813][INFO    ][5230] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-11-21 06:36:03,319 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-11-21 06:36:03,319 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 06:36:03.319237 duration_in_ms=0.776
2019-11-21 06:36:03,319 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:36:03.319822
2019-11-21 06:36:03,320 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-11-21 06:36:03,531 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-11-21 06:36:03,531 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:36:03.531265 duration_in_ms=211.442
2019-11-21 06:36:03,531 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:36:03.531909
2019-11-21 06:36:03,532 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-11-21 06:36:03,838 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-11-21 06:36:03,839 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:36:03.839175 duration_in_ms=307.266
2019-11-21 06:36:03,839 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:36:03.839799
2019-11-21 06:36:03,840 [salt.state       :1813][INFO    ][5230] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-11-21 06:36:03,841 [salt.state       :300 ][INFO    ][5230] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-11-21 06:36:03,842 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:36:03.842011 duration_in_ms=2.212
2019-11-21 06:36:03,842 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:36:03.842602
2019-11-21 06:36:03,842 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-11-21 06:36:04,049 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-11-21 06:36:04,050 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:36:04.050014 duration_in_ms=207.412
2019-11-21 06:36:04,050 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:36:04.050649
2019-11-21 06:36:04,050 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/apache2/sites-available/wsgi_openstack_web.conf]
2019-11-21 06:36:04,260 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/sites-available/wsgi_openstack_web.conf is in the correct state
2019-11-21 06:36:04,260 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:36:04.260949 duration_in_ms=210.299
2019-11-21 06:36:04,261 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:36:04.261603
2019-11-21 06:36:04,261 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-11-21 06:36:04,470 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-11-21 06:36:04,470 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:36:04.470337 duration_in_ms=208.733
2019-11-21 06:36:04,471 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:36:04.470973
2019-11-21 06:36:04,471 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-11-21 06:36:04,677 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-11-21 06:36:04,677 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:36:04.677757 duration_in_ms=206.783
2019-11-21 06:36:04,682 [salt.state       :1780][INFO    ][5230] Running state [apache2] at time 06:36:04.682685
2019-11-21 06:36:04,682 [salt.state       :1813][INFO    ][5230] Executing state service.running for [apache2]
2019-11-21 06:36:04,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-11-21 06:36:04,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:36:04,733 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:36:04,751 [salt.state       :300 ][INFO    ][5230] The service apache2 is already running
2019-11-21 06:36:04,751 [salt.state       :1951][INFO    ][5230] Completed state [apache2] at time 06:36:04.751675 duration_in_ms=68.989
2019-11-21 06:36:04,753 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/conf-enabled/security.conf] at time 06:36:04.753387
2019-11-21 06:36:04,753 [salt.state       :1813][INFO    ][5230] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-11-21 06:36:04,757 [salt.state       :300 ][INFO    ][5230] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-11-21 06:36:04,757 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/conf-enabled/security.conf] at time 06:36:04.757430 duration_in_ms=4.044
2019-11-21 06:36:04,757 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:36:04.757823
2019-11-21 06:36:04,758 [salt.state       :1813][INFO    ][5230] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-11-21 06:36:04,758 [salt.state       :300 ][INFO    ][5230] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-11-21 06:36:04,758 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:36:04.758646 duration_in_ms=0.823
2019-11-21 06:36:04,763 [salt.state       :1780][INFO    ][5230] Running state [cinder] at time 06:36:04.763923
2019-11-21 06:36:04,764 [salt.state       :1813][INFO    ][5230] Executing state group.present for [cinder]
2019-11-21 06:36:04,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['groupadd', '-g 304', '-r', 'cinder'] in directory '/root'
2019-11-21 06:36:04,787 [salt.state       :300 ][INFO    ][5230] {'passwd': 'x', 'gid': 304, 'name': 'cinder', 'members': []}
2019-11-21 06:36:04,788 [salt.state       :1951][INFO    ][5230] Completed state [cinder] at time 06:36:04.788153 duration_in_ms=24.229
2019-11-21 06:36:04,789 [salt.state       :1780][INFO    ][5230] Running state [cinder] at time 06:36:04.789272
2019-11-21 06:36:04,789 [salt.state       :1813][INFO    ][5230] Executing state user.present for [cinder]
2019-11-21 06:36:04,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['useradd', '-s', '/bin/false', '-u', '304', '-g', '304', '-m', '-d', '/var/lib/cinder', '-r', 'cinder'] in directory '/root'
2019-11-21 06:36:04,814 [salt.state       :300 ][INFO    ][5230] {'shell': '/bin/false', 'workphone': '', 'uid': 304, 'passwd': 'x', 'roomnumber': '', 'groups': ['cinder'], 'home': '/var/lib/cinder', 'name': 'cinder', 'gid': 304, 'fullname': '', 'homephone': ''}
2019-11-21 06:36:04,814 [salt.state       :1951][INFO    ][5230] Completed state [cinder] at time 06:36:04.814522 duration_in_ms=25.25
2019-11-21 06:36:04,815 [salt.state       :1780][INFO    ][5230] Running state [cinder-scheduler] at time 06:36:04.815276
2019-11-21 06:36:04,815 [salt.state       :1813][INFO    ][5230] Executing state pkg.installed for [cinder-scheduler]
2019-11-21 06:36:04,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['apt-cache', '-q', 'policy', 'cinder-scheduler'] in directory '/root'
2019-11-21 06:36:04,919 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:36:07,189 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:36:07,222 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'cinder-scheduler'] in directory '/root'
2019-11-21 06:36:07,913 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063607899885
2019-11-21 06:36:07,926 [salt.minion      :1432][INFO    ][5776] Starting a new job with PID 5776
2019-11-21 06:36:07,944 [salt.minion      :1711][INFO    ][5776] Returning information for job: 20191121063607899885
2019-11-21 06:36:14,523 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:36:14,576 [salt.state       :300 ][INFO    ][5230] Made the following changes:
'python-cinder' changed from 'absent' to '2:13.0.7-0ubuntu3~u16.04+mcp66'
'cinder-common' changed from 'absent' to '2:13.0.7-0ubuntu3~u16.04+mcp66'
'cinder-scheduler' changed from 'absent' to '2:13.0.7-0ubuntu3~u16.04+mcp66'

2019-11-21 06:36:14,606 [salt.state       :915 ][INFO    ][5230] Loading fresh modules for state activity
2019-11-21 06:36:14,647 [salt.state       :1951][INFO    ][5230] Completed state [cinder-scheduler] at time 06:36:14.647495 duration_in_ms=9832.219
2019-11-21 06:36:14,654 [salt.state       :1780][INFO    ][5230] Running state [lvm2] at time 06:36:14.654051
2019-11-21 06:36:14,654 [salt.state       :1813][INFO    ][5230] Executing state pkg.installed for [lvm2]
2019-11-21 06:36:15,513 [salt.state       :300 ][INFO    ][5230] All specified packages are already installed
2019-11-21 06:36:15,514 [salt.state       :1951][INFO    ][5230] Completed state [lvm2] at time 06:36:15.514612 duration_in_ms=860.56
2019-11-21 06:36:15,515 [salt.state       :1780][INFO    ][5230] Running state [python-cinder] at time 06:36:15.515572
2019-11-21 06:36:15,516 [salt.state       :1813][INFO    ][5230] Executing state pkg.installed for [python-cinder]
2019-11-21 06:36:15,525 [salt.state       :300 ][INFO    ][5230] All specified packages are already installed
2019-11-21 06:36:15,526 [salt.state       :1951][INFO    ][5230] Completed state [python-cinder] at time 06:36:15.526234 duration_in_ms=10.661
2019-11-21 06:36:15,526 [salt.state       :1780][INFO    ][5230] Running state [gettext-base] at time 06:36:15.526942
2019-11-21 06:36:15,527 [salt.state       :1813][INFO    ][5230] Executing state pkg.installed for [gettext-base]
2019-11-21 06:36:15,536 [salt.state       :300 ][INFO    ][5230] All specified packages are already installed
2019-11-21 06:36:15,537 [salt.state       :1951][INFO    ][5230] Completed state [gettext-base] at time 06:36:15.537295 duration_in_ms=10.349
2019-11-21 06:36:15,538 [salt.state       :1780][INFO    ][5230] Running state [python-memcache] at time 06:36:15.538026
2019-11-21 06:36:15,538 [salt.state       :1813][INFO    ][5230] Executing state pkg.installed for [python-memcache]
2019-11-21 06:36:15,547 [salt.state       :300 ][INFO    ][5230] All specified packages are already installed
2019-11-21 06:36:15,548 [salt.state       :1951][INFO    ][5230] Completed state [python-memcache] at time 06:36:15.548337 duration_in_ms=10.306
2019-11-21 06:36:15,549 [salt.state       :1780][INFO    ][5230] Running state [python-pycadf] at time 06:36:15.549205
2019-11-21 06:36:15,549 [salt.state       :1813][INFO    ][5230] Executing state pkg.installed for [python-pycadf]
2019-11-21 06:36:15,559 [salt.state       :300 ][INFO    ][5230] All specified packages are already installed
2019-11-21 06:36:15,559 [salt.state       :1951][INFO    ][5230] Completed state [python-pycadf] at time 06:36:15.559546 duration_in_ms=10.341
2019-11-21 06:36:15,564 [salt.state       :1780][INFO    ][5230] Running state [cinder_controller_ssl_mysql] at time 06:36:15.564186
2019-11-21 06:36:15,564 [salt.state       :1813][INFO    ][5230] Executing state test.show_notification for [cinder_controller_ssl_mysql]
2019-11-21 06:36:15,565 [salt.state       :300 ][INFO    ][5230] Running cinder._ssl.controller_mysql
2019-11-21 06:36:15,565 [salt.state       :1951][INFO    ][5230] Completed state [cinder_controller_ssl_mysql] at time 06:36:15.565584 duration_in_ms=1.398
2019-11-21 06:36:15,566 [salt.state       :1780][INFO    ][5230] Running state [cinder_controller_ssl_rabbitmq] at time 06:36:15.566321
2019-11-21 06:36:15,566 [salt.state       :1813][INFO    ][5230] Executing state test.show_notification for [cinder_controller_ssl_rabbitmq]
2019-11-21 06:36:15,567 [salt.state       :300 ][INFO    ][5230] Running cinder._ssl.rabbitmq
2019-11-21 06:36:15,567 [salt.state       :1951][INFO    ][5230] Completed state [cinder_controller_ssl_rabbitmq] at time 06:36:15.567608 duration_in_ms=1.287
2019-11-21 06:36:15,568 [salt.state       :1780][INFO    ][5230] Running state [/etc/cinder/cinder.conf] at time 06:36:15.568876
2019-11-21 06:36:15,569 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/cinder/cinder.conf]
2019-11-21 06:36:15,591 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/files/rocky/cinder.conf.controller.Debian'
2019-11-21 06:36:15,793 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/files/backend/_lvm.conf'
2019-11-21 06:36:15,961 [salt.state       :300 ][INFO    ][5230] File changed:
--- 
+++ 
@@ -1,15 +1,4384 @@
+
 [DEFAULT]
+
+#
+# From cinder
+#
+
 rootwrap_config = /etc/cinder/rootwrap.conf
 api_paste_confg = /etc/cinder/api-paste.ini
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+rpc_response_timeout = 3600
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+control_exchange = cinder
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+# The maximum number of items that a collection resource returns in a single
+# response (integer value)
+#osapi_max_limit = 1000
+
+# Json file indicating user visible filter parameters for list queries. (string
+# value)
+# Deprecated group/name - [DEFAULT]/query_volume_filters
+#resource_query_filters_file = /etc/cinder/resource_filters.json
+
+# DEPRECATED: Volume filter options which non-admin user could use to query
+# volumes. Default values are: ['name', 'status', 'metadata',
+# 'availability_zone' ,'bootable', 'group_id'] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#query_volume_filters = name,status,metadata,availability_zone,bootable,group_id
+
+# DEPRECATED: Allow the ability to modify the extra-spec settings of an in-use
+# volume-type. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#allow_inuse_volume_type_modification = false
+
+# Treat X-Forwarded-For as the canonical remote address. Only enable this if
+# you have a sanitizing proxy. (boolean value)
+#use_forwarded_for = false
+
+# Public url to use for versions endpoint. The default is None, which will use
+# the request's host_url attribute to populate the URL base. If Cinder is
+# operating behind a proxy, you will want to change this to represent the
+# proxy's URL. (string value)
+#public_endpoint = <None>
+
+# Backup services use same backend. (boolean value)
+#backup_use_same_host = false
+
+# Compression algorithm (None to disable) (string value)
+# Possible values:
+# none - <No description provided>
+# off - <No description provided>
+# no - <No description provided>
+# zlib - <No description provided>
+# gzip - <No description provided>
+# bz2 - <No description provided>
+# bzip2 - <No description provided>
+#backup_compression_algorithm = zlib
+
+# Backup metadata version to be used when backing up volume metadata. If this
+# number is bumped, make sure the service doing the restore supports the new
+# version. (integer value)
+#backup_metadata_version = 2
+
+# The number of chunks or objects, for which one Ceilometer notification will
+# be sent (integer value)
+#backup_object_number_per_notification = 10
+
+# Interval, in seconds, between two progress notifications reporting the backup
+# status (integer value)
+#backup_timer_interval = 120
+
+# Ceph configuration file to use. (string value)
+#backup_ceph_conf = /etc/ceph/ceph.conf
+
+
+# The Ceph user to connect with. Default here is to use the same user as for
+# Cinder volumes. If not using cephx this should be set to None. (string value)
+#backup_ceph_user = cinder
+
+# The chunk size, in bytes, that a backup is broken into before transfer to the
+# Ceph object store. (integer value)
+#backup_ceph_chunk_size = 134217728
+
+# The Ceph pool where volume backups are stored. (string value)
+#backup_ceph_pool = backups
+
+# RBD stripe unit to use when creating a backup image. (integer value)
+#backup_ceph_stripe_unit = 0
+
+# RBD stripe count to use when creating a backup image. (integer value)
+#backup_ceph_stripe_count = 0
+
+# If True, apply JOURNALING and EXCLUSIVE_LOCK feature bits to the backup RBD
+# objects to allow mirroring (boolean value)
+#backup_ceph_image_journals = false
+
+# If True, always discard excess bytes when restoring volumes i.e. pad with
+# zeroes. (boolean value)
+#restore_discard_excess_bytes = true
+
+# The GCS bucket to use. (string value)
+#backup_gcs_bucket = <None>
+
+# The size in bytes of GCS backup objects. (integer value)
+#backup_gcs_object_size = 52428800
+
+# The size in bytes that changes are tracked for incremental backups.
+# backup_gcs_object_size has to be multiple of backup_gcs_block_size. (integer
+# value)
+#backup_gcs_block_size = 32768
+
+# GCS object will be downloaded in chunks of bytes. (integer value)
+#backup_gcs_reader_chunk_size = 2097152
+
+# GCS object will be uploaded in chunks of bytes. Pass in a value of -1 if the
+# file is to be uploaded as a single chunk. (integer value)
+#backup_gcs_writer_chunk_size = 2097152
+
+# Number of times to retry. (integer value)
+#backup_gcs_num_retries = 3
+
+# List of GCS error codes. (list value)
+#backup_gcs_retry_error_codes = 429
+
+# Location of GCS bucket. (string value)
+#backup_gcs_bucket_location = US
+
+# Storage class of GCS bucket. (string value)
+#backup_gcs_storage_class = NEARLINE
+
+# Absolute path of GCS service account credential file. (string value)
+#backup_gcs_credential_file = <None>
+
+# Owner project id for GCS bucket. (string value)
+#backup_gcs_project_id = <None>
+
+# Http user-agent string for gcs api. (string value)
+#backup_gcs_user_agent = gcscinder
+
+# Enable or Disable the timer to send the periodic progress notifications to
+# Ceilometer when backing up the volume to the GCS backend storage. The default
+# value is True to enable the timer. (boolean value)
+#backup_gcs_enable_progress_timer = true
+
+# URL for http proxy access. (uri value)
+#backup_gcs_proxy_url = <None>
+
+# Base dir containing mount point for gluster share. (string value)
+#glusterfs_backup_mount_point = $state_path/backup_mount
+
+# GlusterFS share in <hostname|ipv4addr|ipv6addr>:<gluster_vol_name> format.
+# Eg: 1.2.3.4:backup_vol (string value)
+#glusterfs_backup_share = <None>
+
+# Base dir containing mount point for NFS share. (string value)
+#backup_mount_point_base = $state_path/backup_mount
+
+# NFS share in hostname:path, ipv4addr:path, or "[ipv6addr]:path" format.
+# (string value)
+#backup_share = <None>
+
+# Mount options passed to the NFS client. See NFS man page for details. (string
+# value)
+#backup_mount_options = <None>
+
+# The maximum size in bytes of the files used to hold backups. If the volume
+# being backed up exceeds this size, then it will be backed up into multiple
+# files.backup_file_size must be a multiple of backup_sha_block_size_bytes.
+# (integer value)
+#backup_file_size = 1999994880
+
+# The size in bytes that changes are tracked for incremental backups.
+# backup_file_size has to be multiple of backup_sha_block_size_bytes. (integer
+# value)
+#backup_sha_block_size_bytes = 32768
+
+# Enable or Disable the timer to send the periodic progress notifications to
+# Ceilometer when backing up the volume to the backend storage. The default
+# value is True to enable the timer. (boolean value)
+#backup_enable_progress_timer = true
+
+# Path specifying where to store backups. (string value)
+#backup_posix_path = $state_path/backup
+
+# Custom directory to use for backups. (string value)
+#backup_container = <None>
+
+# The URL of the Swift endpoint (uri value)
+#backup_swift_url = <None>
+
+# The URL of the Keystone endpoint (uri value)
+#backup_swift_auth_url = <None>
+
+# Info to match when looking for swift in the service catalog. Format is:
+# separated values of the form: <service_type>:<service_name>:<endpoint_type> -
+# Only used if backup_swift_url is unset (string value)
+#swift_catalog_info = object-store:swift:publicURL
+
+# Info to match when looking for keystone in the service catalog. Format is:
+# separated values of the form: <service_type>:<service_name>:<endpoint_type> -
+# Only used if backup_swift_auth_url is unset (string value)
+#keystone_catalog_info = identity:Identity Service:publicURL
+
+# Swift authentication mechanism (per_user or single_user). (string value)
+# Possible values:
+# per_user - <No description provided>
+# single_user - <No description provided>
+#backup_swift_auth = per_user
+
+# Swift authentication version. Specify "1" for auth 1.0, or "2" for auth 2.0
+# or "3" for auth 3.0 (string value)
+#backup_swift_auth_version = 1
+
+# Swift tenant/account name. Required when connecting to an auth 2.0 system
+# (string value)
+#backup_swift_tenant = <None>
+
+# Swift user domain name. Required when connecting to an auth 3.0 system
+# (string value)
+#backup_swift_user_domain = <None>
+
+# Swift project domain name. Required when connecting to an auth 3.0 system
+# (string value)
+#backup_swift_project_domain = <None>
+
+# Swift project/account name. Required when connecting to an auth 3.0 system
+# (string value)
+#backup_swift_project = <None>
+
+# Swift user name (string value)
+#backup_swift_user = <None>
+
+# Swift key for authentication (string value)
+#backup_swift_key = <None>
+
+# The default Swift container to use (string value)
+#backup_swift_container = volumebackups
+
+# The size in bytes of Swift backup objects (integer value)
+#backup_swift_object_size = 52428800
+
+# The size in bytes that changes are tracked for incremental backups.
+# backup_swift_object_size has to be multiple of backup_swift_block_size.
+# (integer value)
+#backup_swift_block_size = 32768
+
+# The number of retries to make for Swift operations (integer value)
+#backup_swift_retry_attempts = 3
+
+# The backoff time in seconds between Swift retries (integer value)
+#backup_swift_retry_backoff = 2
+
+# Enable or Disable the timer to send the periodic progress notifications to
+# Ceilometer when backing up the volume to the Swift backend storage. The
+# default value is True to enable the timer. (boolean value)
+#backup_swift_enable_progress_timer = true
+
+# Location of the CA certificate file to use for swift client requests. (string
+# value)
+#backup_swift_ca_cert_file = <None>
+
+# Bypass verification of server certificate when making SSL connection to
+# Swift. (boolean value)
+#backup_swift_auth_insecure = false
+
+# Volume prefix for the backup id when backing up to TSM (string value)
+#backup_tsm_volume_prefix = backup
+
+# TSM password for the running username (string value)
+#backup_tsm_password = password
+
+# Enable or Disable compression for backups (boolean value)
+#backup_tsm_compression = true
+
+# Driver to use for backups. (string value)
+#backup_driver = cinder.backup.drivers.swift.SwiftBackupDriver
+
+# Offload pending backup delete during backup service startup. If false, the
+# backup service will remain down until all pending backups are deleted.
+# (boolean value)
+#backup_service_inithost_offload = true
+
+# Size of the native threads pool for the backups.  Most backup drivers rely
+# heavily on this, it can be decreased for specific drivers that don't.
+# (integer value)
+# Minimum value: 20
+#backup_native_threads_pool_size = 60
+
+# Number of backup processes to launch. Improves performance with concurrent
+# backups. (integer value)
+# Minimum value: 1
+# Maximum value: 4
+#backup_workers = 1
+
+# Name of this cluster. Used to group volume hosts that share the same backend
+# configurations to work in HA Active-Active mode.  Active-Active is not yet
+# supported. (string value)
+#cluster = <None>
+
+# Top-level directory for maintaining cinder's state (string value)
+state_path = /var/lib/cinder
+
+# IP address of this host (host address value)
+#my_ip = <HOST_IP_ADDRESS>
+
+# A list of the URLs of glance API servers available to cinder
+# ([http[s]://][hostname|ip]:port). If protocol is not specified it defaults to
+# http. (list value)
+glance_api_servers = http://172.16.10.36:9292
+
+# Number retries when downloading an image from glance (integer value)
+# Minimum value: 0
+glance_num_retries = 0
+
+# Allow to perform insecure SSL (https) requests to glance (https will be used
+# but cert validation will not be performed). (boolean value)
+#glance_api_insecure = false
+
+# Enables or disables negotiation of SSL layer compression. In some cases
+# disabling compression can improve data throughput, such as when high network
+# bandwidth is available and you use compressed image formats like qcow2.
+# (boolean value)
+#glance_api_ssl_compression = false
+
+# Location of ca certificates file to use for glance client requests. (string
+# value)
+
+# http/https timeout value for glance operations. If no value (None) is
+# supplied here, the glanceclient default value is used. (integer value)
+#glance_request_timeout = <None>
+
+# DEPRECATED: Deploy v2 of the Cinder API. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#enable_v2_api = true
+
+# Deploy v3 of the Cinder API. (boolean value)
+enable_v3_api = true
+
+# Enables or disables rate limit of the API. (boolean value)
+#api_rate_limit = true
+
+# Specify list of extensions to load when using osapi_volume_extension option
+# with cinder.api.contrib.select_extensions (list value)
+#osapi_volume_ext_list =
+
+# osapi volume extension to load (multi valued)
+osapi_volume_extension = cinder.api.contrib.standard_extensions
+
+# Full class name for the Manager for volume (string value)
+#volume_manager = cinder.volume.manager.VolumeManager
+
+# Full class name for the Manager for volume backup (string value)
+#backup_manager = cinder.backup.manager.BackupManager
+
+# Full class name for the Manager for scheduler (string value)
+#scheduler_manager = cinder.scheduler.manager.SchedulerManager
+
+# Name of this node.  This can be an opaque identifier. It is not necessarily a
+# host name, FQDN, or IP address. (host address value)
+#host = localhost
+
+# Availability zone of this node. Can be overridden per volume backend with the
+# option "backend_availability_zone". (string value)
+#storage_availability_zone = nova
+
+# Default availability zone for new volumes. If not set, the
+# storage_availability_zone option value is used as the default for new
+# volumes. (string value)
+#default_availability_zone = <None>
+
+# If the requested Cinder availability zone is unavailable, fall back to the
+# value of default_availability_zone, then storage_availability_zone, instead
+# of failing. (boolean value)
+allow_availability_zone_fallback = True
+
+# Default volume type to use (string value)
+#default_volume_type = <None>
+
+# Default group type to use (string value)
+#default_group_type = <None>
+
+# Time period for which to generate volume usages. The options are hour, day,
+# month, or year. (string value)
+#volume_usage_audit_period = month
+
+# Path to the rootwrap configuration file to use for running commands as root
+# (string value)
+#rootwrap_config = /etc/cinder/rootwrap.conf
+
+# Enable monkey patching (boolean value)
+#monkey_patch = false
+
+# List of modules/decorators to monkey patch (list value)
+#monkey_patch_modules =
+
+# Maximum time since last check-in for a service to be considered up (integer
+# value)
+#service_down_time = 60
+
+# The full class name of the volume API class to use (string value)
+#volume_api_class = cinder.volume.api.API
+
+# The full class name of the volume backup API class (string value)
+#backup_api_class = cinder.backup.api.API
+
+# The strategy to use for auth. Supports noauth or keystone. (string value)
+# Possible values:
+# noauth - <No description provided>
+# keystone - <No description provided>
+auth_strategy = keystone
+
+# A list of backend names to use. These backend names should be backed by a
+# unique [CONFIG] group with its options (list value)
+#enabled_backends = <None>
+default_volume_type=lvm-driver
+
+enabled_backends=lvm-driver
+
+
+# Whether snapshots count against gigabyte quota (boolean value)
+#no_snapshot_gb_quota = false
+
+# The full class name of the volume transfer API class (string value)
+#transfer_api_class = cinder.transfer.api.API
+
+# The full class name of the consistencygroup API class (string value)
+#consistencygroup_api_class = cinder.consistencygroup.api.API
+
+# The full class name of the group API class (string value)
+#group_api_class = cinder.group.api.API
+
+# The full class name of the compute API class to use (string value)
+#compute_api_class = cinder.compute.nova.API
+
+# ID of the project which will be used as the Cinder internal tenant. (string
+# value)
+#cinder_internal_tenant_project_id = <None>
+
+# ID of the user to be used in volume operations as the Cinder internal tenant.
+# (string value)
+#cinder_internal_tenant_user_id = <None>
+
+# Services to be added to the available pool on create (boolean value)
+#enable_new_services = true
+
+# Template string to be used to generate volume names (string value)
+volume_name_template = volume-%s
+
+# Template string to be used to generate snapshot names (string value)
+#snapshot_name_template = snapshot-%s
+
+# Template string to be used to generate backup names (string value)
+#backup_name_template = backup-%s
+
+# Driver to use for database access (string value)
+#db_driver = cinder.db
+
+# A list of url schemes that can be downloaded directly via the direct_url.
+# Currently supported schemes: [file, cinder]. (list value)
+#allowed_direct_url_schemes =
+
+# Info to match when looking for glance in the service catalog. Format is:
+# separated values of the form: <service_type>:<service_name>:<endpoint_type> -
+# Only used if glance_api_servers are not provided. (string value)
+#glance_catalog_info = image:glance:publicURL
+
+# Default core properties of image (list value)
+#glance_core_properties = checksum,container_format,disk_format,image_name,image_id,min_disk,min_ram,name,size
+
+# Directory used for temporary storage during image conversion (string value)
+#image_conversion_dir = $state_path/conversion
+
+# message minimum life in seconds. (integer value)
+#message_ttl = 2592000
+
+# interval between periodic task runs to clean expired messages in seconds.
+# (integer value)
+#message_reap_interval = 86400
+
+# Number of volumes allowed per project (integer value)
+#quota_volumes = 10
+
+# Number of volume snapshots allowed per project (integer value)
+#quota_snapshots = 10
+
+# Number of consistencygroups allowed per project (integer value)
+#quota_consistencygroups = 10
+
+# Number of groups allowed per project (integer value)
+#quota_groups = 10
+
+# Total amount of storage, in gigabytes, allowed for volumes and snapshots per
+# project (integer value)
+#quota_gigabytes = 1000
+
+# Number of volume backups allowed per project (integer value)
+#quota_backups = 10
+
+# Total amount of storage, in gigabytes, allowed for backups per project
+# (integer value)
+#quota_backup_gigabytes = 1000
+
+# Number of seconds until a reservation expires (integer value)
+#reservation_expire = 86400
+
+# Interval between periodic task runs to clean expired reservations in seconds.
+# (integer value)
+#reservation_clean_interval = $reservation_expire
+
+# Count of reservations until usage is refreshed (integer value)
+#until_refresh = 0
+
+# Number of seconds between subsequent usage refreshes (integer value)
+#max_age = 0
+
+# Default driver to use for quota checks (string value)
+#quota_driver = cinder.quota.DbQuotaDriver
+
+# Enables or disables use of default quota class with default quota. (boolean
+# value)
+#use_default_quota_class = true
+
+# Max size allowed per volume, in gigabytes (integer value)
+#per_volume_size_limit = -1
+
+# The scheduler host manager class to use (string value)
+#scheduler_host_manager = cinder.scheduler.host_manager.HostManager
+
+# Maximum number of attempts to schedule a volume (integer value)
+#scheduler_max_attempts = 3
+
+# Which filter class names to use for filtering hosts when not specified in the
+# request. (list value)
+#scheduler_default_filters = AvailabilityZoneFilter,CapacityFilter,CapabilitiesFilter
+
+# Which weigher class names to use for weighing hosts. (list value)
+#scheduler_default_weighers = CapacityWeigher
+
+# Which handler to use for selecting the host/pool after weighing (string
+# value)
+#scheduler_weight_handler = cinder.scheduler.weights.OrderedHostWeightHandler
+
+# Default scheduler driver to use (string value)
+#scheduler_driver = cinder.scheduler.filter_scheduler.FilterScheduler
+
+# Absolute path to scheduler configuration JSON file. (string value)
+#scheduler_json_config_location =
+
+# Multiplier used for weighing free capacity. Negative numbers mean to stack vs
+# spread. (floating point value)
+#capacity_weight_multiplier = 1.0
+
+# Multiplier used for weighing allocated capacity. Positive numbers mean to
+# stack vs spread. (floating point value)
+#allocated_capacity_weight_multiplier = -1.0
+
+# Multiplier used for weighing volume number. Negative numbers mean to spread
+# vs stack. (floating point value)
+#volume_number_multiplier = -1.0
+
+# Interval, in seconds, between nodes reporting state to datastore (integer
+# value)
+#report_interval = 10
+
+# Interval, in seconds, between running periodic tasks (integer value)
+#periodic_interval = 60
+
+# Range, in seconds, to randomly delay when starting the periodic task
+# scheduler to reduce stampeding. (Disable by setting to 0) (integer value)
+#periodic_fuzzy_delay = 60
+
+# IP address on which OpenStack Volume API listens (string value)
+osapi_volume_listen = 172.16.10.36
+
+# Port on which OpenStack Volume API listens (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#osapi_volume_listen_port = 8776
+
+# Number of workers for OpenStack Volume API service. The default is equal to
+# the number of CPUs available. (integer value)
+osapi_volume_workers = 4
+
+# Wraps the socket in a SSL context if True is set. A certificate file and key
+# file must be specified. (boolean value)
+#osapi_volume_use_ssl = false
+
+# Option to enable strict host key checking.  When set to "True" Cinder will
+# only connect to systems with a host key present in the configured
+# "ssh_hosts_key_file".  When set to "False" the host key will be saved upon
+# first connection and used for subsequent connections.  Default=False (boolean
+# value)
+#strict_ssh_host_key_policy = false
+
+# File containing SSH host keys for the systems with which Cinder needs to
+# communicate.  OPTIONAL: Default=$state_path/ssh_known_hosts (string value)
+#ssh_hosts_key_file = $state_path/ssh_known_hosts
+
+# The number of characters in the salt. (integer value)
+#volume_transfer_salt_length = 8
+
+# The number of characters in the autogenerated auth key. (integer value)
+#volume_transfer_key_length = 16
+
+# Enables the Force option on upload_to_image. This enables running
+# upload_volume on in-use volumes for backends that support it. (boolean value)
+#enable_force_upload = false
+enable_force_upload = false
+
+# Create volume from snapshot at the host where snapshot resides (boolean
+# value)
+#snapshot_same_host = true
+
+# Ensure that the new volumes are the same AZ as snapshot or source volume
+# (boolean value)
+#cloned_volume_same_az = true
+
+# Cache volume availability zones in memory for the provided duration in
+# seconds (integer value)
+#az_cache_duration = 3600
+
+# Number of times to attempt to run flakey shell commands (integer value)
+#num_shell_tries = 3
+
+# The percentage of backend capacity is reserved (integer value)
+# Minimum value: 0
+# Maximum value: 100
+#reserved_percentage = 0
+
+# Prefix for iSCSI volumes (string value)
+# Deprecated group/name - [DEFAULT]/iscsi_target_prefix
+#target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSCSI daemon is listening on (string value)
+# Deprecated group/name - [DEFAULT]/iscsi_ip_address
+#target_ip_address = $my_ip
+
+# The list of secondary IP addresses of the iSCSI daemon (list value)
+#iscsi_secondary_ip_addresses =
+
+# The port that the iSCSI daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/iscsi_port
+#target_port = 3260
+
+# The maximum number of times to rescan targets to find volume (integer value)
+#num_volume_device_scan_tries = 3
+
+# The backend name for a given driver implementation (string value)
+volume_backend_name = DEFAULT
+
+# Do we attach/detach volumes in cinder using multipath for volume to image and
+# image to volume transfers? (boolean value)
+#use_multipath_for_image_xfer = false
+
+# If this is set to True, attachment of volumes for image transfer will be
+# aborted when multipathd is not running. Otherwise, it will fallback to single
+# path. (boolean value)
+#enforce_multipath_for_image_xfer = false
+
+# Method used to wipe old volumes (string value)
+# Possible values:
+# none - <No description provided>
+# zero - <No description provided>
+#volume_clear = zero
+volume_clear = none
+
+# Size in MiB to wipe at start of old volumes. 1024 MiBat max. 0 => all
+# (integer value)
+# Maximum value: 1024
+#volume_clear_size = 0
+
+# The flag to pass to ionice to alter the i/o priority of the process used to
+# zero a volume after deletion, for example "-c3" for idle only priority.
+# (string value)
+#volume_clear_ionice = <None>
+
+# Target user-land tool to use. tgtadm is default, use lioadm for LIO iSCSI
+# support, scstadmin for SCST target support, ietadm for iSCSI Enterprise
+# Target, iscsictl for Chelsio iSCSI Target, nvmet for NVMEoF support, or fake
+# for testing. (string value)
+# Possible values:
+# tgtadm - <No description provided>
+# lioadm - <No description provided>
+# scstadmin - <No description provided>
+# iscsictl - <No description provided>
+# ietadm - <No description provided>
+# nvmet - <No description provided>
+# fake - <No description provided>
+# Deprecated group/name - [DEFAULT]/iscsi_helper
+target_helper = tgtadm
+
+# Volume configuration file storage directory (string value)
+volumes_dir = /var/lib/cinder/volumes
+
+# IET configuration file (string value)
+#iet_conf = /etc/iet/ietd.conf
+
+# Chiscsi (CXT) global defaults configuration file (string value)
+#chiscsi_conf = /etc/chelsio-iscsi/chiscsi.conf
+
+# Sets the behavior of the iSCSI target to either perform blockio or fileio
+# optionally, auto can be set and Cinder will autodetect type of backing device
+# (string value)
+# Possible values:
+# blockio - <No description provided>
+# fileio - <No description provided>
+# auto - <No description provided>
+#iscsi_iotype = fileio
+
+# The default block size used when copying/clearing volumes (string value)
+#volume_dd_blocksize = 1M
+
+# The blkio cgroup name to be used to limit bandwidth of volume copy (string
+# value)
+#volume_copy_blkio_cgroup_name = cinder-volume-copy
+
+# The upper limit of bandwidth of volume copy. 0 => unlimited (integer value)
+#volume_copy_bps_limit = 0
+
+# Sets the behavior of the iSCSI target to either perform write-back(on) or
+# write-through(off). This parameter is valid if target_helper is set to
+# tgtadm. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+#iscsi_write_cache = on
+
+# Sets the target-specific flags for the iSCSI target. Only used for tgtadm to
+# specify backing device flags using bsoflags option. The specified string is
+# passed as is to the underlying tool. (string value)
+#iscsi_target_flags =
+
+# Determines the target protocol for new volumes, created with tgtadm, lioadm
+# and nvmet target helpers. In order to enable RDMA, this parameter should be
+# set with the value "iser". The supported iSCSI protocol values are "iscsi"
+# and "iser", in case of nvmet target set to "nvmet_rdma". (string value)
+# Possible values:
+# iscsi - <No description provided>
+# iser - <No description provided>
+# nvmet_rdma - <No description provided>
+# Deprecated group/name - [DEFAULT]/iscsi_protocol
+#target_protocol = iscsi
+
+# The path to the client certificate key for verification, if the driver
+# supports it. (string value)
+#driver_client_cert_key = <None>
+
+# The path to the client certificate for verification, if the driver supports
+# it. (string value)
+#driver_client_cert = <None>
+
+# Tell driver to use SSL for connection to backend storage if the driver
+# supports it. (boolean value)
+#driver_use_ssl = false
+
+# Representation of the over subscription ratio when thin provisioning is
+# enabled. Default ratio is 20.0, meaning provisioned capacity can be 20 times
+# of the total physical capacity. If the ratio is 10.5, it means provisioned
+# capacity can be 10.5 times of the total physical capacity. A ratio of 1.0
+# means provisioned capacity cannot exceed the total physical capacity. If
+# ratio is 'auto', Cinder will automatically calculate the ratio based on the
+# provisioned capacity and the used space. If not set to auto, the ratio has to
+# be a minimum of 1.0. (string value)
+#max_over_subscription_ratio = 20.0
+
+# Certain ISCSI targets have predefined target names, SCST target driver uses
+# this name. (string value)
+#scst_target_iqn_name = <None>
+
+# SCST target implementation can choose from multiple SCST target drivers.
+# (string value)
+#scst_target_driver = iscsi
+
+# Option to enable/disable CHAP authentication for targets. (boolean value)
+#use_chap_auth = false
+
+# CHAP user name. (string value)
+#chap_username =
+
+# Password for specified CHAP account name. (string value)
+#chap_password =
+
+# Namespace for driver private data values to be saved in. (string value)
+#driver_data_namespace = <None>
+
+# String representation for an equation that will be used to filter hosts. Only
+# used when the driver filter is set to be used by the Cinder scheduler.
+# (string value)
+#filter_function = <None>
+
+# String representation for an equation that will be used to determine the
+# goodness of a host. Only used when using the goodness weigher is set to be
+# used by the Cinder scheduler. (string value)
+#goodness_function = <None>
+
+# If set to True the http client will validate the SSL certificate of the
+# backend endpoint. (boolean value)
+#driver_ssl_cert_verify = false
+
+# Can be used to specify a non default path to a CA_BUNDLE file or directory
+# with certificates of trusted CAs, which will be used to validate the backend
+# (string value)
+#driver_ssl_cert_path = <None>
+
+# List of options that control which trace info is written to the DEBUG log
+# level to assist developers. Valid values are method and api. (list value)
+#trace_flags = <None>
+
+# Multi opt of dictionaries to represent a replication target device.  This
+# option may be specified multiple times in a single config section to specify
+# multiple replication target devices.  Each entry takes the standard dict
+# config form: replication_device =
+# target_device_id:<required>,key1:value1,key2:value2... (dict value)
+#replication_device = <None>
+
+# If set to True, upload-to-image in raw format will create a cloned volume and
+# register its location to the image service, instead of uploading the volume
+# content. The cinder backend and locations support must be enabled in the
+# image service. (boolean value)
+#image_upload_use_cinder_backend = false
+
+# If set to True, the image volume created by upload-to-image will be placed in
+# the internal tenant. Otherwise, the image volume is created in the current
+# context's tenant. (boolean value)
+#image_upload_use_internal_tenant = false
+
+# Enable the image volume cache for this backend. (boolean value)
+#image_volume_cache_enabled = false
+
+# Max size of the image volume cache for this backend in GB. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_size_gb = 0
+
+# Max number of entries allowed in the image volume cache. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_count = 0
+
+# Report to clients of Cinder that the backend supports discard (aka.
+# trim/unmap). This will not actually change the behavior of the backend or the
+# client directly, it will only notify that it can be used. (boolean value)
+#report_discard_supported = false
+
+# Protocol for transferring data between host and storage back-end. (string
+# value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+#storage_protocol = iscsi
+
+# If this is set to True, a temporary snapshot will be created for performing
+# non-disruptive backups. Otherwise a temporary volume will be cloned in order
+# to perform a backup. (boolean value)
+#backup_use_temp_snapshot = false
+
+# Set this to True when you want to allow an unsupported driver to start.
+# Drivers that haven't maintained a working CI system and testing are marked as
+# unsupported until CI is working again.  This also marks a driver as
+# deprecated and may be removed in the next release. (boolean value)
+#enable_unsupported_driver = false
+
+# Availability zone for this volume backend. If not set, the
+# storage_availability_zone option value is used as the default for all
+# backends. (string value)
+#backend_availability_zone = <None>
+
+# The maximum number of times to rescan iSER targetto find volume (integer
+# value)
+#num_iser_scan_tries = 3
+
+# Prefix for iSER volumes (string value)
+#iser_target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSER daemon is listening on (string value)
+#iser_ip_address = $my_ip
+
+# The port that the iSER daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#iser_port = 3260
+
+# The name of the iSER target user-land tool to use (string value)
+#iser_helper = tgtadm
+
+# The port that the NVMe target is listening on. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nvmet_port_id = 1
+
+# The namespace id associated with the subsystem that will be created with the
+# path for the LVM volume. (integer value)
+#nvmet_ns_id = 10
+
+# DataCore virtual disk type (single/mirrored). Mirrored virtual disks require
+# two storage servers in the server group. (string value)
+# Possible values:
+# single - <No description provided>
+# mirrored - <No description provided>
+#datacore_disk_type = single
+
+# DataCore virtual disk storage profile. (string value)
+#datacore_storage_profile = <None>
+
+# List of DataCore disk pools that can be used by volume driver. (list value)
+#datacore_disk_pools =
+
+# Seconds to wait for a response from a DataCore API call. (integer value)
+# Minimum value: 1
+#datacore_api_timeout = 300
+
+# Seconds to wait for DataCore virtual disk to come out of the "Failed" state.
+# (integer value)
+# Minimum value: 0
+#datacore_disk_failed_delay = 15
+
+# List of iSCSI targets that cannot be used to attach volume. To prevent the
+# DataCore iSCSI volume driver from using some front-end targets in volume
+# attachment, specify this option and list the iqn and target machine for each
+# target as the value, such as <iqn:target name>, <iqn:target name>,
+# <iqn:target name>. (list value)
+#datacore_iscsi_unallowed_targets =
+
+# Configure CHAP authentication for iSCSI connections. (boolean value)
+#datacore_iscsi_chap_enabled = false
+
+# iSCSI CHAP authentication password storage file. (string value)
+#datacore_iscsi_chap_storage = <None>
+
+# Storage system autoexpand parameter for volumes (True/False) (boolean value)
+#instorage_mcs_vol_autoexpand = true
+
+# Storage system compression option for volumes (boolean value)
+#instorage_mcs_vol_compression = false
+
+# Enable InTier for volumes (boolean value)
+#instorage_mcs_vol_intier = true
+
+# Allow tenants to specify QOS on create (boolean value)
+#instorage_mcs_allow_tenant_qos = false
+
+# Storage system grain size parameter for volumes (32/64/128/256) (integer
+# value)
+# Minimum value: 32
+# Maximum value: 256
+#instorage_mcs_vol_grainsize = 256
+
+# Storage system space-efficiency parameter for volumes (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#instorage_mcs_vol_rsize = 2
+
+# Storage system threshold for volume capacity warnings (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#instorage_mcs_vol_warning = 0
+
+# Maximum number of seconds to wait for LocalCopy to be prepared. (integer
+# value)
+# Minimum value: 1
+# Maximum value: 600
+#instorage_mcs_localcopy_timeout = 120
+
+# Specifies the InStorage LocalCopy copy rate to be used when creating a full
+# volume copy. The default is rate is 50, and the valid rates are 1-100.
+# (integer value)
+# Minimum value: 1
+# Maximum value: 100
+#instorage_mcs_localcopy_rate = 50
+
+# The I/O group in which to allocate volumes. It can be a comma-separated list
+# in which case the driver will select an io_group based on least number of
+# volumes associated with the io_group. (string value)
+#instorage_mcs_vol_iogrp = 0
+
+# Specifies secondary management IP or hostname to be used if san_ip is invalid
+# or becomes inaccessible. (string value)
+#instorage_san_secondary_ip = <None>
+
+# Comma separated list of storage system storage pools for volumes. (list
+# value)
+#instorage_mcs_volpool_name = volpool
+
+# Configure CHAP authentication for iSCSI connections (Default: Enabled)
+# (boolean value)
+#instorage_mcs_iscsi_chap_enabled = true
+
+# The StorPool template for volumes with no type. (string value)
+#storpool_template = <None>
+
+# The default StorPool chain replication value.  Used when creating a volume
+# with no specified type if storpool_template is not set.  Also used for
+# calculating the apparent free space reported in the stats. (integer value)
+#storpool_replication = 3
+
+# Create sparse Lun. (boolean value)
+#vrts_lun_sparse = true
+
+# VA config file. (string value)
+#vrts_target_config = /etc/cinder/vrts_target.xml
+
+# Timeout for creating the volume to migrate to when performing volume
+# migration (seconds) (integer value)
+#migration_create_volume_timeout_secs = 300
+
+# Offload pending volume delete during volume service startup (boolean value)
+#volume_service_inithost_offload = false
+
+# FC Zoning mode configured, only 'fabric' is supported now. (string value)
+#zoning_mode = <None>
+
+# Sets the value of TCP_KEEPALIVE (True/False) for each server socket. (boolean
+# value)
+#tcp_keepalive = true
+
+# Sets the value of TCP_KEEPINTVL in seconds for each server socket. Not
+# supported on OS X. (integer value)
+#tcp_keepalive_interval = <None>
+
+# Sets the value of TCP_KEEPCNT for each server socket. Not supported on OS X.
+# (integer value)
+#tcp_keepalive_count = <None>
+
+
+[backend]
+
+#
+# From cinder
+#
+
+# Backend override of host value. (string value)
+#backend_host = <None>
+[lvm-driver]
+host=ctl01
+volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
+volume_backend_name=lvm-driver
 iscsi_helper = tgtadm
-volume_name_template = volume-%s
-volume_group = cinder-volumes
-verbose = True
-auth_strategy = keystone
-state_path = /var/lib/cinder
-lock_path = /var/lock/cinder
-volumes_dir = /var/lib/cinder/volumes
-enabled_backends = lvm
+volume_group = cinder-volume
+
+
+[backend_defaults]
+
+#
+# From cinder
+#
+
+# Number of times to attempt to run flakey shell commands (integer value)
+#num_shell_tries = 3
+
+# The percentage of backend capacity is reserved (integer value)
+# Minimum value: 0
+# Maximum value: 100
+#reserved_percentage = 0
+
+# Prefix for iSCSI volumes (string value)
+# Deprecated group/name - [backend_defaults]/iscsi_target_prefix
+#target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSCSI daemon is listening on (string value)
+# Deprecated group/name - [backend_defaults]/iscsi_ip_address
+#target_ip_address = $my_ip
+
+# The list of secondary IP addresses of the iSCSI daemon (list value)
+#iscsi_secondary_ip_addresses =
+
+# The port that the iSCSI daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [backend_defaults]/iscsi_port
+#target_port = 3260
+
+# The maximum number of times to rescan targets to find volume (integer value)
+#num_volume_device_scan_tries = 3
+
+# The backend name for a given driver implementation (string value)
+#volume_backend_name = <None>
+
+# Do we attach/detach volumes in cinder using multipath for volume to image and
+# image to volume transfers? (boolean value)
+#use_multipath_for_image_xfer = false
+
+# If this is set to True, attachment of volumes for image transfer will be
+# aborted when multipathd is not running. Otherwise, it will fallback to single
+# path. (boolean value)
+#enforce_multipath_for_image_xfer = false
+
+# Method used to wipe old volumes (string value)
+# Possible values:
+# none - <No description provided>
+# zero - <No description provided>
+#volume_clear = zero
+
+# Size in MiB to wipe at start of old volumes. 1024 MiBat max. 0 => all
+# (integer value)
+# Maximum value: 1024
+#volume_clear_size = 0
+
+# The flag to pass to ionice to alter the i/o priority of the process used to
+# zero a volume after deletion, for example "-c3" for idle only priority.
+# (string value)
+#volume_clear_ionice = <None>
+
+# Target user-land tool to use. tgtadm is default, use lioadm for LIO iSCSI
+# support, scstadmin for SCST target support, ietadm for iSCSI Enterprise
+# Target, iscsictl for Chelsio iSCSI Target, nvmet for NVMEoF support, or fake
+# for testing. (string value)
+# Possible values:
+# tgtadm - <No description provided>
+# lioadm - <No description provided>
+# scstadmin - <No description provided>
+# iscsictl - <No description provided>
+# ietadm - <No description provided>
+# nvmet - <No description provided>
+# fake - <No description provided>
+# Deprecated group/name - [backend_defaults]/iscsi_helper
+#target_helper = tgtadm
+
+# Volume configuration file storage directory (string value)
+#volumes_dir = $state_path/volumes
+
+# IET configuration file (string value)
+#iet_conf = /etc/iet/ietd.conf
+
+# Chiscsi (CXT) global defaults configuration file (string value)
+#chiscsi_conf = /etc/chelsio-iscsi/chiscsi.conf
+
+# Sets the behavior of the iSCSI target to either perform blockio or fileio
+# optionally, auto can be set and Cinder will autodetect type of backing device
+# (string value)
+# Possible values:
+# blockio - <No description provided>
+# fileio - <No description provided>
+# auto - <No description provided>
+#iscsi_iotype = fileio
+
+# The default block size used when copying/clearing volumes (string value)
+#volume_dd_blocksize = 1M
+
+# The blkio cgroup name to be used to limit bandwidth of volume copy (string
+# value)
+#volume_copy_blkio_cgroup_name = cinder-volume-copy
+
+# The upper limit of bandwidth of volume copy. 0 => unlimited (integer value)
+#volume_copy_bps_limit = 0
+
+# Sets the behavior of the iSCSI target to either perform write-back(on) or
+# write-through(off). This parameter is valid if target_helper is set to
+# tgtadm. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+#iscsi_write_cache = on
+
+# Sets the target-specific flags for the iSCSI target. Only used for tgtadm to
+# specify backing device flags using bsoflags option. The specified string is
+# passed as is to the underlying tool. (string value)
+#iscsi_target_flags =
+
+# Determines the target protocol for new volumes, created with tgtadm, lioadm
+# and nvmet target helpers. In order to enable RDMA, this parameter should be
+# set with the value "iser". The supported iSCSI protocol values are "iscsi"
+# and "iser", in case of nvmet target set to "nvmet_rdma". (string value)
+# Possible values:
+# iscsi - <No description provided>
+# iser - <No description provided>
+# nvmet_rdma - <No description provided>
+# Deprecated group/name - [backend_defaults]/iscsi_protocol
+#target_protocol = iscsi
+
+# The path to the client certificate key for verification, if the driver
+# supports it. (string value)
+#driver_client_cert_key = <None>
+
+# The path to the client certificate for verification, if the driver supports
+# it. (string value)
+#driver_client_cert = <None>
+
+# Tell driver to use SSL for connection to backend storage if the driver
+# supports it. (boolean value)
+#driver_use_ssl = false
+
+# Representation of the over subscription ratio when thin provisioning is
+# enabled. Default ratio is 20.0, meaning provisioned capacity can be 20 times
+# of the total physical capacity. If the ratio is 10.5, it means provisioned
+# capacity can be 10.5 times of the total physical capacity. A ratio of 1.0
+# means provisioned capacity cannot exceed the total physical capacity. If
+# ratio is 'auto', Cinder will automatically calculate the ratio based on the
+# provisioned capacity and the used space. If not set to auto, the ratio has to
+# be a minimum of 1.0. (string value)
+#max_over_subscription_ratio = 20.0
+
+# Certain ISCSI targets have predefined target names, SCST target driver uses
+# this name. (string value)
+#scst_target_iqn_name = <None>
+
+# SCST target implementation can choose from multiple SCST target drivers.
+# (string value)
+#scst_target_driver = iscsi
+
+# Option to enable/disable CHAP authentication for targets. (boolean value)
+#use_chap_auth = false
+
+# CHAP user name. (string value)
+#chap_username =
+
+# Password for specified CHAP account name. (string value)
+#chap_password =
+
+# Namespace for driver private data values to be saved in. (string value)
+#driver_data_namespace = <None>
+
+# String representation for an equation that will be used to filter hosts. Only
+# used when the driver filter is set to be used by the Cinder scheduler.
+# (string value)
+#filter_function = <None>
+
+# String representation for an equation that will be used to determine the
+# goodness of a host. Only used when using the goodness weigher is set to be
+# used by the Cinder scheduler. (string value)
+#goodness_function = <None>
+
+# If set to True the http client will validate the SSL certificate of the
+# backend endpoint. (boolean value)
+#driver_ssl_cert_verify = false
+
+# Can be used to specify a non default path to a CA_BUNDLE file or directory
+# with certificates of trusted CAs, which will be used to validate the backend
+# (string value)
+#driver_ssl_cert_path = <None>
+
+# List of options that control which trace info is written to the DEBUG log
+# level to assist developers. Valid values are method and api. (list value)
+#trace_flags = <None>
+
+# Multi opt of dictionaries to represent a replication target device.  This
+# option may be specified multiple times in a single config section to specify
+# multiple replication target devices.  Each entry takes the standard dict
+# config form: replication_device =
+# target_device_id:<required>,key1:value1,key2:value2... (dict value)
+#replication_device = <None>
+
+# If set to True, upload-to-image in raw format will create a cloned volume and
+# register its location to the image service, instead of uploading the volume
+# content. The cinder backend and locations support must be enabled in the
+# image service. (boolean value)
+#image_upload_use_cinder_backend = false
+
+# If set to True, the image volume created by upload-to-image will be placed in
+# the internal tenant. Otherwise, the image volume is created in the current
+# context's tenant. (boolean value)
+#image_upload_use_internal_tenant = false
+
+# Enable the image volume cache for this backend. (boolean value)
+#image_volume_cache_enabled = false
+
+# Max size of the image volume cache for this backend in GB. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_size_gb = 0
+
+# Max number of entries allowed in the image volume cache. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_count = 0
+
+# Report to clients of Cinder that the backend supports discard (aka.
+# trim/unmap). This will not actually change the behavior of the backend or the
+# client directly, it will only notify that it can be used. (boolean value)
+#report_discard_supported = false
+
+# Protocol for transferring data between host and storage back-end. (string
+# value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+#storage_protocol = iscsi
+
+# If this is set to True, a temporary snapshot will be created for performing
+# non-disruptive backups. Otherwise a temporary volume will be cloned in order
+# to perform a backup. (boolean value)
+#backup_use_temp_snapshot = false
+
+# Set this to True when you want to allow an unsupported driver to start.
+# Drivers that haven't maintained a working CI system and testing are marked as
+# unsupported until CI is working again.  This also marks a driver as
+# deprecated and may be removed in the next release. (boolean value)
+#enable_unsupported_driver = false
+
+# Availability zone for this volume backend. If not set, the
+# storage_availability_zone option value is used as the default for all
+# backends. (string value)
+#backend_availability_zone = <None>
+
+# The maximum number of times to rescan iSER targetto find volume (integer
+# value)
+#num_iser_scan_tries = 3
+
+# Prefix for iSER volumes (string value)
+#iser_target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSER daemon is listening on (string value)
+#iser_ip_address = $my_ip
+
+# The port that the iSER daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#iser_port = 3260
+
+# The name of the iSER target user-land tool to use (string value)
+#iser_helper = tgtadm
+
+# The port that the NVMe target is listening on. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nvmet_port_id = 1
+
+# The namespace id associated with the subsystem that will be created with the
+# path for the LVM volume. (integer value)
+#nvmet_ns_id = 10
+
+# Hostname for the CoprHD Instance (string value)
+#coprhd_hostname = <None>
+
+# Port for the CoprHD Instance (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#coprhd_port = 4443
+
+# Username for accessing the CoprHD Instance (string value)
+#coprhd_username = <None>
+
+# Password for accessing the CoprHD Instance (string value)
+#coprhd_password = <None>
+
+# Tenant to utilize within the CoprHD Instance (string value)
+#coprhd_tenant = <None>
+
+# Project to utilize within the CoprHD Instance (string value)
+#coprhd_project = <None>
+
+# Virtual Array to utilize within the CoprHD Instance (string value)
+#coprhd_varray = <None>
+
+# True | False to indicate if the storage array in CoprHD is VMAX or VPLEX
+# (boolean value)
+#coprhd_emulate_snapshot = false
+
+# Rest Gateway IP or FQDN for Scaleio (string value)
+#coprhd_scaleio_rest_gateway_host = None
+
+# Rest Gateway Port for Scaleio (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#coprhd_scaleio_rest_gateway_port = 4984
+
+# Username for Rest Gateway (string value)
+#coprhd_scaleio_rest_server_username = <None>
+
+# Rest Gateway Password (string value)
+#coprhd_scaleio_rest_server_password = <None>
+
+# verify server certificate (boolean value)
+#scaleio_verify_server_certificate = false
+
+# Server certificate path (string value)
+#scaleio_server_certificate_path = <None>
+
+# Datera API port. (string value)
+#datera_api_port = 7717
+
+# DEPRECATED: Datera API version. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#datera_api_version = 2
+
+# Timeout for HTTP 503 retry messages (integer value)
+#datera_503_timeout = 120
+
+# Interval between 503 retries (integer value)
+#datera_503_interval = 5
+
+# True to set function arg and return logging (boolean value)
+#datera_debug = false
+
+# ONLY FOR DEBUG/TESTING PURPOSES
+# True to set replica_count to 1 (boolean value)
+#datera_debug_replica_count_override = false
+
+# If set to 'Map' --> OpenStack project ID will be mapped implicitly to Datera
+# tenant ID
+# If set to 'None' --> Datera tenant ID will not be used during volume
+# provisioning
+# If set to anything else --> Datera tenant ID will be the provided value
+# (string value)
+#datera_tenant_id = <None>
+
+# Set to True to disable profiling in the Datera driver (boolean value)
+#datera_disable_profiler = false
+
+# Group name to use for creating volumes. Defaults to "group-0". (string value)
+#eqlx_group_name = group-0
+
+# Maximum retry count for reconnection. Default is 5. (integer value)
+# Minimum value: 0
+#eqlx_cli_max_retries = 5
+
+# Pool in which volumes will be created. Defaults to "default". (string value)
+#eqlx_pool = default
+
+# Storage Center System Serial Number (integer value)
+#dell_sc_ssn = 64702
+
+# Dell API port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#dell_sc_api_port = 3033
+
+# Name of the server folder to use on the Storage Center (string value)
+#dell_sc_server_folder = openstack
+
+# Name of the volume folder to use on the Storage Center (string value)
+#dell_sc_volume_folder = openstack
+
+# Enable HTTPS SC certificate verification (boolean value)
+#dell_sc_verify_cert = false
+
+# IP address of secondary DSM controller (string value)
+#secondary_san_ip =
+
+# Secondary DSM user name (string value)
+#secondary_san_login = Admin
+
+# Secondary DSM user password name (string value)
+#secondary_san_password =
+
+# Secondary Dell API port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#secondary_sc_api_port = 3033
+
+# Dell SC API async call default timeout in seconds. (integer value)
+#dell_api_async_rest_timeout = 15
+
+# Dell SC API sync call default timeout in seconds. (integer value)
+#dell_api_sync_rest_timeout = 30
+
+# Domain IP to be excluded from iSCSI returns. (IP address value)
+#excluded_domain_ip = <None>
+
+# Server OS type to use when creating a new server on the Storage Center.
+# (string value)
+#dell_server_os = Red Hat Linux 6.x
+
+# REST server port. (string value)
+#sio_rest_server_port = 443
+
+# Verify server certificate. (boolean value)
+#sio_verify_server_certificate = false
+
+# Server certificate path. (string value)
+#sio_server_certificate_path = <None>
+
+# Round up volume capacity. (boolean value)
+#sio_round_volume_capacity = true
+
+# Unmap volume before deletion. (boolean value)
+#sio_unmap_volume_before_deletion = false
+
+# Storage Pools. (string value)
+#sio_storage_pools = <None>
+
+# DEPRECATED: Protection Domain ID. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_protection_domain_id = <None>
+
+# DEPRECATED: Protection Domain name. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_protection_domain_name = <None>
+
+# DEPRECATED: Storage Pool name. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_storage_pool_name = <None>
+
+# DEPRECATED: Storage Pool ID. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_storage_pool_id = <None>
+
+# ScaleIO API version. (string value)
+#sio_server_api_version = <None>
+
+# max_over_subscription_ratio setting for the ScaleIO driver. This replaces the
+# general max_over_subscription_ratio which has no effect in this
+# driver.Maximum value allowed for ScaleIO is 10.0. (floating point value)
+#sio_max_over_subscription_ratio = 10.0
+
+# Allow thick volumes to be created in Storage Pools when zero padding is
+# disabled. This option should not be enabled if multiple tenants will utilize
+# thick volumes from a shared Storage Pool. (boolean value)
+#sio_allow_non_padded_thick_volumes = false
+
+# A comma-separated list of storage pool names to be used. (list value)
+#unity_storage_pool_names = <None>
+
+# A comma-separated list of iSCSI or FC ports to be used. Each port can be
+# Unix-style glob expressions. (list value)
+#unity_io_ports = <None>
+
+# To remove the host from Unity when the last LUN is detached from it. By
+# default, it is False. (boolean value)
+#remove_empty_host = false
+
+# DEPRECATED: Use this file for cinder emc plugin config data. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#cinder_dell_emc_config_file = /etc/cinder/cinder_dell_emc_config.xml
+
+# Use this value to specify length of the interval in seconds. (integer value)
+#interval = 3
+
+# Use this value to specify number of retries. (integer value)
+#retries = 200
+
+# Use this value to enable the initiator_check. (boolean value)
+#initiator_check = false
+
+# REST server port number. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#san_rest_port = 8443
+
+# Serial number of the array to connect to. (string value)
+#vmax_array = <None>
+
+# Storage resource pool on array to use for provisioning. (string value)
+#vmax_srp = <None>
+
+# Service level to use for provisioning storage. (string value)
+#vmax_service_level = <None>
+
+# Workload (string value)
+#vmax_workload = <None>
+
+# List of port groups containing frontend ports configured prior for server
+# connection. (list value)
+#vmax_port_groups = <None>
+
+# VNX authentication scope type. By default, the value is global. (string
+# value)
+#storage_vnx_authentication_type = global
+
+# Directory path that contains the VNX security file. Make sure the security
+# file is generated first. (string value)
+#storage_vnx_security_file_dir = <None>
+
+# Naviseccli Path. (string value)
+#naviseccli_path = <None>
+
+# Comma-separated list of storage pool names to be used. (list value)
+#storage_vnx_pool_names = <None>
+
+# Default timeout for CLI operations in minutes. For example, LUN migration is
+# a typical long running operation, which depends on the LUN size and the load
+# of the array. An upper bound in the specific deployment can be set to avoid
+# unnecessary long wait. By default, it is 365 days long. (integer value)
+#default_timeout = 31536000
+
+# Default max number of LUNs in a storage group. By default, the value is 255.
+# (integer value)
+#max_luns_per_storage_group = 255
+
+# To destroy storage group when the last LUN is removed from it. By default,
+# the value is False. (boolean value)
+#destroy_empty_storage_group = false
+
+# Mapping between hostname and its iSCSI initiator IP addresses. (string value)
+#iscsi_initiators = <None>
+
+# Comma separated iSCSI or FC ports to be used in Nova or Cinder. (list value)
+#io_port_list = <None>
+
+# Automatically register initiators. By default, the value is False. (boolean
+# value)
+#initiator_auto_registration = false
+
+# Automatically deregister initiators after the related storage group is
+# destroyed. By default, the value is False. (boolean value)
+#initiator_auto_deregistration = false
+
+# DEPRECATED: Report free_capacity_gb as 0 when the limit to maximum number of
+# pool LUNs is reached. By default, the value is False. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#check_max_pool_luns_threshold = false
+
+# Delete a LUN even if it is in Storage Groups. By default, the value is False.
+# (boolean value)
+#force_delete_lun_in_storagegroup = false
+
+# Force LUN creation even if the full threshold of pool is reached. By default,
+# the value is False. (boolean value)
+#ignore_pool_full_threshold = false
+
+# XMS cluster id in multi-cluster environment (string value)
+#xtremio_cluster_name =
+
+# Number of retries in case array is busy (integer value)
+#xtremio_array_busy_retry_count = 5
+
+# Interval between retries in case array is busy (integer value)
+#xtremio_array_busy_retry_interval = 5
+
+# Number of volumes created from each cached glance image (integer value)
+#xtremio_volumes_per_glance_cache = 100
+
+# Should the driver remove initiator groups with no volumes after the last
+# connection was terminated. Since the behavior till now was to leave the IG
+# be, we default to False (not deleting IGs without connected volumes); setting
+# this parameter to True will remove any IG after terminating its connection to
+# the last volume. (boolean value)
+#xtremio_clean_unused_ig = false
+
+# The IP of DMS client socket server (IP address value)
+#disco_client = 127.0.0.1
+
+# The port to connect DMS client socket server (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#disco_client_port = 9898
+
+# DEPRECATED: Path to the wsdl file to communicate with DISCO request manager
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#disco_wsdl_path = /etc/cinder/DISCOService.wsdl
+
+# DEPRECATED: The IP address of the REST server (IP address value)
+# Deprecated group/name - [DEFAULT]/rest_ip
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Using san_ip later
+#disco_rest_ip = <None>
+
+# Use soap client or rest client for communicating with DISCO. Possible values
+# are "soap" or "rest". (string value)
+# Possible values:
+# soap - <No description provided>
+# rest - <No description provided>
+# Deprecated group/name - [DEFAULT]/choice_client
+#disco_choice_client = <None>
+
+# DEPRECATED: The port of DISCO source API (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Using san_api_port later
+#disco_src_api_port = 8080
+
+# Prefix before volume name to differentiate DISCO volume created through
+# openstack and the other ones (string value)
+# Deprecated group/name - [backend_defaults]/volume_name_prefix
+#disco_volume_name_prefix = openstack-
+
+# How long we check whether a snapshot is finished before we give up (integer
+# value)
+# Deprecated group/name - [backend_defaults]/snapshot_check_timeout
+#disco_snapshot_check_timeout = 3600
+
+# How long we check whether a restore is finished before we give up (integer
+# value)
+# Deprecated group/name - [backend_defaults]/restore_check_timeout
+#disco_restore_check_timeout = 3600
+
+# How long we check whether a clone is finished before we give up (integer
+# value)
+# Deprecated group/name - [backend_defaults]/clone_check_timeout
+#disco_clone_check_timeout = 3600
+
+# How long we wait before retrying to get an item detail (integer value)
+# Deprecated group/name - [backend_defaults]/retry_interval
+#disco_retry_interval = 1
+
+# Number of nodes that should replicate the data. (integer value)
+#drbdmanage_redundancy = 1
+
+# Resource deployment completion wait policy. (string value)
+#drbdmanage_resource_policy = {"ratio": "0.51", "timeout": "60"}
+
+# Disk options to set on new resources. See http://www.drbd.org/en/doc/users-
+# guide-90/re-drbdconf for all the details. (string value)
+#drbdmanage_disk_options = {"c-min-rate": "4M"}
+
+# Net options to set on new resources. See http://www.drbd.org/en/doc/users-
+# guide-90/re-drbdconf for all the details. (string value)
+#drbdmanage_net_options = {"connect-int": "4", "allow-two-primaries": "yes", "ko-count": "30", "max-buffers": "20000", "ping-timeout": "100"}
+
+# Resource options to set on new resources. See
+# http://www.drbd.org/en/doc/users-guide-90/re-drbdconf for all the details.
+# (string value)
+#drbdmanage_resource_options = {"auto-promote-timeout": "300"}
+
+# Snapshot completion wait policy. (string value)
+#drbdmanage_snapshot_policy = {"count": "1", "timeout": "60"}
+
+# Volume resize completion wait policy. (string value)
+#drbdmanage_resize_policy = {"timeout": "60"}
+
+# Resource deployment completion wait plugin. (string value)
+#drbdmanage_resource_plugin = drbdmanage.plugins.plugins.wait_for.WaitForResource
+
+# Snapshot completion wait plugin. (string value)
+#drbdmanage_snapshot_plugin = drbdmanage.plugins.plugins.wait_for.WaitForSnapshot
+
+# Volume resize completion wait plugin. (string value)
+#drbdmanage_resize_plugin = drbdmanage.plugins.plugins.wait_for.WaitForVolumeSize
+
+# If set, the c-vol node will receive a useable
+#                 /dev/drbdX device, even if the actual data is stored on
+#                 other nodes only.
+#                 This is useful for debugging, maintenance, and to be
+#                 able to do the iSCSI export from the c-vol node. (boolean
+# value)
+#drbdmanage_devs_on_controller = true
+
+# config file for cinder eternus_dx volume driver (string value)
+#cinder_eternus_config_file = /etc/cinder/cinder_fujitsu_eternus_dx.xml
+
+# The flag of thin storage allocation. (boolean value)
+#dsware_isthin = false
+
+# Fusionstorage manager ip addr for cinder-volume. (string value)
+#dsware_manager =
+
+# Fusionstorage agent ip addr range. (string value)
+#fusionstorageagent =
+
+# Pool type, like sata-2copy. (string value)
+#pool_type = default
+
+# Pool id permit to use. (list value)
+#pool_id_filter =
+
+# Create clone volume timeout. (integer value)
+#clone_volume_timeout = 680
+
+# Space network name to use for data transfer (string value)
+#hgst_net = Net 1 (IPv4)
+
+# Comma separated list of Space storage servers:devices. ex:
+# os1_stor:gbd0,os2_stor:gbd0 (string value)
+#hgst_storage_servers = os:gbd0
+
+# Should spaces be redundantly stored (1/0) (string value)
+#hgst_redundancy = 0
+
+# User to own created spaces (string value)
+#hgst_space_user = root
+
+# Group to own created spaces (string value)
+#hgst_space_group = disk
+
+# UNIX mode for created spaces (string value)
+#hgst_space_mode = 0600
+
+# 3PAR WSAPI Server Url like https://<3par ip>:8080/api/v1 (string value)
+#hpe3par_api_url =
+
+# 3PAR username with the 'edit' role (string value)
+#hpe3par_username =
+
+# 3PAR password for the user specified in hpe3par_username (string value)
+#hpe3par_password =
+
+# List of the CPG(s) to use for volume creation (list value)
+#hpe3par_cpg = OpenStack
+
+# The CPG to use for Snapshots for volumes. If empty the userCPG will be used.
+# (string value)
+#hpe3par_cpg_snap =
+
+# The time in hours to retain a snapshot.  You can't delete it before this
+# expires. (string value)
+#hpe3par_snapshot_retention =
+
+# The time in hours when a snapshot expires  and is deleted.  This must be
+# larger than expiration (string value)
+#hpe3par_snapshot_expiration =
+
+# Enable HTTP debugging to 3PAR (boolean value)
+#hpe3par_debug = false
+
+# List of target iSCSI addresses to use. (list value)
+#hpe3par_iscsi_ips =
+
+# Enable CHAP authentication for iSCSI connections. (boolean value)
+#hpe3par_iscsi_chap_enabled = false
+
+# HPE LeftHand WSAPI Server Url like https://<LeftHand ip>:8081/lhos (uri
+# value)
+# Deprecated group/name - [backend_defaults]/hplefthand_api_url
+#hpelefthand_api_url = <None>
+
+# HPE LeftHand Super user username (string value)
+# Deprecated group/name - [backend_defaults]/hplefthand_username
+#hpelefthand_username = <None>
+
+# HPE LeftHand Super user password (string value)
+# Deprecated group/name - [backend_defaults]/hplefthand_password
+#hpelefthand_password = <None>
+
+# HPE LeftHand cluster name (string value)
+# Deprecated group/name - [backend_defaults]/hplefthand_clustername
+#hpelefthand_clustername = <None>
+
+# Configure CHAP authentication for iSCSI connections (Default: Disabled)
+# (boolean value)
+# Deprecated group/name - [backend_defaults]/hplefthand_iscsi_chap_enabled
+#hpelefthand_iscsi_chap_enabled = false
+
+# Enable HTTP debugging to LeftHand (boolean value)
+# Deprecated group/name - [backend_defaults]/hplefthand_debug
+#hpelefthand_debug = false
+
+# Port number of SSH service. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#hpelefthand_ssh_port = 16022
+
+# The configuration file for the Cinder Huawei driver. (string value)
+#cinder_huawei_conf_file = /etc/cinder/cinder_huawei_conf.xml
+
+# The remote device hypermetro will use. (string value)
+#hypermetro_devices = <None>
+
+# The remote metro device san user. (string value)
+#metro_san_user = <None>
+
+# The remote metro device san password. (string value)
+#metro_san_password = <None>
+
+# The remote metro device domain name. (string value)
+#metro_domain_name = <None>
+
+# The remote metro device request url. (string value)
+#metro_san_address = <None>
+
+# The remote metro device pool names. (string value)
+#metro_storage_pools = <None>
+
+# Connection protocol should be FC. (Default is FC.) (string value)
+#flashsystem_connection_protocol = FC
+
+# Allows vdisk to multi host mapping. (Default is True) (boolean value)
+#flashsystem_multihostmap_enabled = true
+
+# DEPRECATED: This option no longer has any affect. It is deprecated and will
+# be removed in the next release. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#flashsystem_multipath_enabled = false
+
+# Default iSCSI Port ID of FlashSystem. (Default port is 0.) (integer value)
+#flashsystem_iscsi_portid = 0
+
+# Specifies the path of the GPFS directory where Block Storage volume and
+# snapshot files are stored. (string value)
+#gpfs_mount_point_base = <None>
+
+# Specifies the path of the Image service repository in GPFS.  Leave undefined
+# if not storing images in GPFS. (string value)
+#gpfs_images_dir = <None>
+
+# Specifies the type of image copy to be used.  Set this when the Image service
+# repository also uses GPFS so that image files can be transferred efficiently
+# from the Image service to the Block Storage service. There are two valid
+# values: "copy" specifies that a full copy of the image is made;
+# "copy_on_write" specifies that copy-on-write optimization strategy is used
+# and unmodified blocks of the image file are shared efficiently. (string
+# value)
+# Possible values:
+# copy - <No description provided>
+# copy_on_write - <No description provided>
+# <None> - <No description provided>
+#gpfs_images_share_mode = <None>
+
+# Specifies an upper limit on the number of indirections required to reach a
+# specific block due to snapshots or clones.  A lengthy chain of copy-on-write
+# snapshots or clones can have a negative impact on performance, but improves
+# space utilization.  0 indicates unlimited clone depth. (integer value)
+#gpfs_max_clone_depth = 0
+
+# Specifies that volumes are created as sparse files which initially consume no
+# space. If set to False, the volume is created as a fully allocated file, in
+# which case, creation may take a significantly longer time. (boolean value)
+#gpfs_sparse_volumes = true
+
+# Specifies the storage pool that volumes are assigned to. By default, the
+# system storage pool is used. (string value)
+#gpfs_storage_pool = system
+
+# Comma-separated list of IP address or hostnames of GPFS nodes. (list value)
+#gpfs_hosts =
+
+# Username for GPFS nodes. (string value)
+#gpfs_user_login = root
+
+# Password for GPFS node user. (string value)
+#gpfs_user_password =
+
+# Filename of private key to use for SSH authentication. (string value)
+#gpfs_private_key =
+
+# SSH port to use. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#gpfs_ssh_port = 22
+
+# File containing SSH host keys for the gpfs nodes with which driver needs to
+# communicate. Default=$state_path/ssh_known_hosts (string value)
+#gpfs_hosts_key_file = $state_path/ssh_known_hosts
+
+# Option to enable strict gpfs host key checking while connecting to gpfs
+# nodes. Default=False (boolean value)
+#gpfs_strict_host_key_policy = false
+
+# Mapping between IODevice address and unit address. (string value)
+#ds8k_devadd_unitadd_mapping =
+
+# Set the first two digits of SSID. (string value)
+#ds8k_ssid_prefix = FF
+
+# Reserve LSSs for consistency group. (string value)
+#lss_range_for_cg =
+
+# Set to zLinux if your OpenStack version is prior to Liberty and you're
+# connecting to zLinux systems. Otherwise set to auto. Valid values for this
+# parameter are: 'auto', 'AMDLinuxRHEL', 'AMDLinuxSuse', 'AppleOSX', 'Fujitsu',
+# 'Hp', 'HpTru64', 'HpVms', 'LinuxDT', 'LinuxRF', 'LinuxRHEL', 'LinuxSuse',
+# 'Novell', 'SGI', 'SVC', 'SanFsAIX', 'SanFsLinux', 'Sun', 'VMWare', 'Win2000',
+# 'Win2003', 'Win2008', 'Win2012', 'iLinux', 'nSeries', 'pLinux', 'pSeries',
+# 'pSeriesPowerswap', 'zLinux', 'iSeries'. (string value)
+#ds8k_host_type = auto
+
+# Proxy driver that connects to the IBM Storage Array (string value)
+#proxy = cinder.volume.drivers.ibm.ibm_storage.proxy.IBMStorageProxy
+
+# Connection type to the IBM Storage Array (string value)
+# Possible values:
+# fibre_channel - <No description provided>
+# iscsi - <No description provided>
+#connection_type = iscsi
+
+# CHAP authentication mode, effective only for iscsi (disabled|enabled) (string
+# value)
+# Possible values:
+# disabled - <No description provided>
+# enabled - <No description provided>
+#chap = disabled
+
+# List of Management IP addresses (separated by commas) (string value)
+#management_ips =
+
+# Comma separated list of storage system storage pools for volumes. (list
+# value)
+#storwize_svc_volpool_name = volpool
+
+# Storage system space-efficiency parameter for volumes (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#storwize_svc_vol_rsize = 2
+
+# Storage system threshold for volume capacity warnings (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#storwize_svc_vol_warning = 0
+
+# Storage system autoexpand parameter for volumes (True/False) (boolean value)
+#storwize_svc_vol_autoexpand = true
+
+# Storage system grain size parameter for volumes (32/64/128/256) (integer
+# value)
+#storwize_svc_vol_grainsize = 256
+
+# Storage system compression option for volumes (boolean value)
+#storwize_svc_vol_compression = false
+
+# Enable Easy Tier for volumes (boolean value)
+#storwize_svc_vol_easytier = true
+
+# The I/O group in which to allocate volumes. It can be a comma-separated list
+# in which case the driver will select an io_group based on least number of
+# volumes associated with the io_group. (string value)
+#storwize_svc_vol_iogrp = 0
+
+# Maximum number of seconds to wait for FlashCopy to be prepared. (integer
+# value)
+# Minimum value: 1
+# Maximum value: 600
+#storwize_svc_flashcopy_timeout = 120
+
+# DEPRECATED: This option no longer has any affect. It is deprecated and will
+# be removed in the next release. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#storwize_svc_multihostmap_enabled = true
+
+# Allow tenants to specify QOS on create (boolean value)
+#storwize_svc_allow_tenant_qos = false
+
+# If operating in stretched cluster mode, specify the name of the pool in which
+# mirrored copies are stored.Example: "pool2" (string value)
+#storwize_svc_stretched_cluster_partner = <None>
+
+# Specifies secondary management IP or hostname to be used if san_ip is invalid
+# or becomes inaccessible. (string value)
+#storwize_san_secondary_ip = <None>
+
+# Specifies that the volume not be formatted during creation. (boolean value)
+#storwize_svc_vol_nofmtdisk = false
+
+# Specifies the Storwize FlashCopy copy rate to be used when creating a full
+# volume copy. The default is rate is 50, and the valid rates are 1-150.
+# (integer value)
+# Minimum value: 1
+# Maximum value: 150
+#storwize_svc_flashcopy_rate = 50
+
+# Specifies the name of the pool in which mirrored copy is stored. Example:
+# "pool2" (string value)
+#storwize_svc_mirror_pool = <None>
+
+# Specifies the name of the peer pool for hyperswap volume, the peer pool must
+# exist on the other site. (string value)
+#storwize_peer_pool = <None>
+
+# Specifies the site information for host. One WWPN or multi WWPNs used in the
+# host can be specified. For example:
+# storwize_preferred_host_site=site1:wwpn1,site2:wwpn2&wwpn3 or
+# storwize_preferred_host_site=site1:iqn1,site2:iqn2 (dict value)
+#storwize_preferred_host_site =
+
+# This defines an optional cycle period that applies to Global Mirror
+# relationships with a cycling mode of multi. A Global Mirror relationship
+# using the multi cycling_mode performs a complete cycle at most once each
+# period. The default is 300 seconds, and the valid seconds are 60-86400.
+# (integer value)
+# Minimum value: 60
+# Maximum value: 86400
+#cycle_period_seconds = 300
+
+# Connect with multipath (FC only; iSCSI multipath is controlled by Nova)
+# (boolean value)
+#storwize_svc_multipath_enabled = false
+
+# Configure CHAP authentication for iSCSI connections (Default: Enabled)
+# (boolean value)
+#storwize_svc_iscsi_chap_enabled = true
+
+# Name of the pool from which volumes are allocated (string value)
+#infinidat_pool_name = <None>
+
+# Protocol for transferring data between host and storage back-end. (string
+# value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+#infinidat_storage_protocol = fc
+
+# List of names of network spaces to use for iSCSI connectivity (list value)
+#infinidat_iscsi_netspaces =
+
+# Specifies whether to turn on compression for newly created volumes. (boolean
+# value)
+#infinidat_use_compression = false
+
+# K2 driver will calculate max_oversubscription_ratio on setting this option as
+# True. (boolean value)
+#auto_calc_max_oversubscription_ratio = false
+
+# Whether or not our private network has unique FQDN on each initiator or not.
+# For example networks with QA systems usually have multiple servers/VMs with
+# the same FQDN.  When true this will create host entries on K2 using the FQDN,
+# when false it will use the reversed IQN/WWNN. (boolean value)
+#unique_fqdn_network = true
+
+# Disabling iSCSI discovery (sendtargets) for multipath connections on K2
+# driver. (boolean value)
+#disable_discovery = false
+
+# Pool or Vdisk name to use for volume creation. (string value)
+#lenovo_backend_name = A
+
+# linear (for VDisk) or virtual (for Pool). (string value)
+# Possible values:
+# linear - <No description provided>
+# virtual - <No description provided>
+#lenovo_backend_type = virtual
+
+# Lenovo api interface protocol. (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+#lenovo_api_protocol = https
+
+# Whether to verify Lenovo array SSL certificate. (boolean value)
+#lenovo_verify_certificate = false
+
+# Lenovo array SSL certificate path. (string value)
+#lenovo_verify_certificate_path = <None>
+
+# List of comma-separated target iSCSI IP addresses. (list value)
+#lenovo_iscsi_ips =
+
+# Name for the VG that will contain exported volumes (string value)
+#volume_group = cinder-volumes
+
+# If >0, create LVs with multiple mirrors. Note that this requires lvm_mirrors
+# + 2 PVs with available space (integer value)
+#lvm_mirrors = 0
+
+# Type of LVM volumes to deploy; (default, thin, or auto). Auto defaults to
+# thin if thin is supported. (string value)
+# Possible values:
+# default - <No description provided>
+# thin - <No description provided>
+# auto - <No description provided>
+#lvm_type = auto
+
+# LVM conf file to use for the LVM driver in Cinder; this setting is ignored if
+# the specified file does not exist (You can also specify 'None' to not use a
+# conf file even if one exists). (string value)
+#lvm_conf_file = /etc/cinder/lvm.conf
+
+# Suppress leaked file descriptor warnings in LVM commands. (boolean value)
+#lvm_suppress_fd_warnings = false
+
+# The storage family type used on the storage system; valid values are
+# ontap_cluster for using clustered Data ONTAP, or eseries for using E-Series.
+# (string value)
+# Possible values:
+# ontap_cluster - <No description provided>
+# eseries - <No description provided>
+#netapp_storage_family = ontap_cluster
+
+# The storage protocol to be used on the data path with the storage system.
+# (string value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+# nfs - <No description provided>
+#netapp_storage_protocol = <None>
+
+# The hostname (or IP address) for the storage system or proxy server. (string
+# value)
+#netapp_server_hostname = <None>
+
+# The TCP port to use for communication with the storage system or proxy
+# server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for
+# HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS. (integer value)
+#netapp_server_port = <None>
+
+# The transport protocol used when communicating with the storage system or
+# proxy server. (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+#netapp_transport_type = http
+
+# Administrative user account name used to access the storage system or proxy
+# server. (string value)
+#netapp_login = <None>
+
+# Password for the administrative user account specified in the netapp_login
+# option. (string value)
+#netapp_password = <None>
+
+# This option specifies the virtual storage server (Vserver) name on the
+# storage cluster on which provisioning of block storage volumes should occur.
+# (string value)
+#netapp_vserver = <None>
+
+# The quantity to be multiplied by the requested volume size to ensure enough
+# space is available on the virtual storage server (Vserver) to fulfill the
+# volume creation request.  Note: this option is deprecated and will be removed
+# in favor of "reserved_percentage" in the Mitaka release. (floating point
+# value)
+#netapp_size_multiplier = 1.2
+
+# This option determines if storage space is reserved for LUN allocation. If
+# enabled, LUNs are thick provisioned. If space reservation is disabled,
+# storage space is allocated on demand. (string value)
+# Possible values:
+# enabled - <No description provided>
+# disabled - <No description provided>
+#netapp_lun_space_reservation = enabled
+
+# If the percentage of available space for an NFS share has dropped below the
+# value specified by this option, the NFS image cache will be cleaned. (integer
+# value)
+#thres_avl_size_perc_start = 20
+
+# When the percentage of available space on an NFS share has reached the
+# percentage specified by this option, the driver will stop clearing files from
+# the NFS image cache that have not been accessed in the last M minutes, where
+# M is the value of the expiry_thres_minutes configuration option. (integer
+# value)
+#thres_avl_size_perc_stop = 60
+
+# This option specifies the threshold for last access time for images in the
+# NFS image cache. When a cache cleaning cycle begins, images in the cache that
+# have not been accessed in the last M minutes, where M is the value of this
+# parameter, will be deleted from the cache to create free space on the NFS
+# share. (integer value)
+#expiry_thres_minutes = 720
+
+# This option is used to specify the path to the E-Series proxy application on
+# a proxy server. The value is combined with the value of the
+# netapp_transport_type, netapp_server_hostname, and netapp_server_port options
+# to create the URL used by the driver to connect to the proxy application.
+# (string value)
+#netapp_webservice_path = /devmgr/v2
+
+# This option is only utilized when the storage family is configured to
+# eseries. This option is used to restrict provisioning to the specified
+# controllers. Specify the value of this option to be a comma separated list of
+# controller hostnames or IP addresses to be used for provisioning. (string
+# value)
+#netapp_controller_ips = <None>
+
+# Password for the NetApp E-Series storage array. (string value)
+#netapp_sa_password = <None>
+
+# This option specifies whether the driver should allow operations that require
+# multiple attachments to a volume. An example would be live migration of
+# servers that have volumes attached. When enabled, this backend is limited to
+# 256 total volumes in order to guarantee volumes can be accessed by more than
+# one host. (boolean value)
+#netapp_enable_multiattach = false
+
+# This option specifies the path of the NetApp copy offload tool binary. Ensure
+# that the binary has execute permissions set which allow the effective user of
+# the cinder-volume process to execute the file. (string value)
+#netapp_copyoffload_tool_path = <None>
+
+# This option defines the type of operating system that will access a LUN
+# exported from Data ONTAP; it is assigned to the LUN at the time it is
+# created. (string value)
+#netapp_lun_ostype = <None>
+
+# This option defines the type of operating system for all initiators that can
+# access a LUN. This information is used when mapping LUNs to individual hosts
+# or groups of hosts. (string value)
+#netapp_host_type = <None>
+
+# This option is used to restrict provisioning to the specified pools. Specify
+# the value of this option to be a regular expression which will be applied to
+# the names of objects from the storage backend which represent pools in
+# Cinder. This option is only utilized when the storage protocol is configured
+# to use iSCSI or FC. (string value)
+# Deprecated group/name - [backend_defaults]/netapp_volume_list
+# Deprecated group/name - [backend_defaults]/netapp_storage_pools
+#netapp_pool_name_search_pattern = (.+)
+
+# Multi opt of dictionaries to represent the aggregate mapping between source
+# and destination back ends when using whole back end replication. For every
+# source aggregate associated with a cinder pool (NetApp FlexVol), you would
+# need to specify the destination aggregate on the replication target device. A
+# replication target device is configured with the configuration option
+# replication_device. Specify this option as many times as you have replication
+# devices. Each entry takes the standard dict config form:
+# netapp_replication_aggregate_map =
+# backend_id:<name_of_replication_device_section>,src_aggr_name1:dest_aggr_name1,src_aggr_name2:dest_aggr_name2,...
+# (dict value)
+#netapp_replication_aggregate_map = <None>
+
+# The maximum time in seconds to wait for existing SnapMirror transfers to
+# complete before aborting during a failover. (integer value)
+# Minimum value: 0
+#netapp_snapmirror_quiesce_timeout = 3600
+
+# IP address of Nexenta SA (string value)
+#nexenta_host =
+
+# HTTP(S) port to connect to Nexenta REST API server. If it is equal zero, 8443
+# for HTTPS and 8080 for HTTP is used (integer value)
+#nexenta_rest_port = 0
+
+# Use http or https for REST connection (default auto) (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+# auto - <No description provided>
+#nexenta_rest_protocol = auto
+
+# Use secure HTTP for REST connection (default True) (boolean value)
+#nexenta_use_https = true
+
+# User name to connect to Nexenta SA (string value)
+#nexenta_user = admin
+
+# Password to connect to Nexenta SA (string value)
+#nexenta_password = nexenta
+
+# Nexenta target portal port (integer value)
+#nexenta_iscsi_target_portal_port = 3260
+
+# SA Pool that holds all volumes (string value)
+#nexenta_volume = cinder
+
+# IQN prefix for iSCSI targets (string value)
+#nexenta_target_prefix = iqn.1986-03.com.sun:02:cinder-
+
+# Prefix for iSCSI target groups on SA (string value)
+#nexenta_target_group_prefix = cinder/
+
+# Volume group for ns5 (string value)
+#nexenta_volume_group = iscsi
+
+# Compression value for new ZFS folders. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+# gzip - <No description provided>
+# gzip-1 - <No description provided>
+# gzip-2 - <No description provided>
+# gzip-3 - <No description provided>
+# gzip-4 - <No description provided>
+# gzip-5 - <No description provided>
+# gzip-6 - <No description provided>
+# gzip-7 - <No description provided>
+# gzip-8 - <No description provided>
+# gzip-9 - <No description provided>
+# lzjb - <No description provided>
+# zle - <No description provided>
+# lz4 - <No description provided>
+#nexenta_dataset_compression = on
+
+# Deduplication value for new ZFS folders. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+# sha256 - <No description provided>
+# verify - <No description provided>
+# sha256, verify - <No description provided>
+#nexenta_dataset_dedup = off
+
+# Human-readable description for the folder. (string value)
+#nexenta_dataset_description =
+
+# Block size for datasets (integer value)
+#nexenta_blocksize = 4096
+
+# Block size for datasets (integer value)
+#nexenta_ns5_blocksize = 32
+
+# Enables or disables the creation of sparse datasets (boolean value)
+#nexenta_sparse = false
+
+# File with the list of available nfs shares (string value)
+#nexenta_shares_config = /etc/cinder/nfs_shares
+
+# Base directory that contains NFS share mount points (string value)
+#nexenta_mount_point_base = $state_path/mnt
+
+# Enables or disables the creation of volumes as sparsed files that take no
+# space. If disabled (False), volume is created as a regular file, which takes
+# a long time. (boolean value)
+#nexenta_sparsed_volumes = true
+
+# If set True cache NexentaStor appliance volroot option value. (boolean value)
+#nexenta_nms_cache_volroot = true
+
+# Enable stream compression, level 1..9. 1 - gives best speed; 9 - gives best
+# compression. (integer value)
+#nexenta_rrmgr_compression = 0
+
+# TCP Buffer size in KiloBytes. (integer value)
+#nexenta_rrmgr_tcp_buf_size = 4096
+
+# Number of TCP connections. (integer value)
+#nexenta_rrmgr_connections = 2
+
+# NexentaEdge logical path of directory to store symbolic links to NBDs (string
+# value)
+#nexenta_nbd_symlinks_dir = /dev/disk/by-path
+
+# IP address of NexentaEdge management REST API endpoint (string value)
+#nexenta_rest_address =
+
+# User name to connect to NexentaEdge (string value)
+#nexenta_rest_user = admin
+
+# Password to connect to NexentaEdge (string value)
+#nexenta_rest_password = nexenta
+
+# NexentaEdge logical path of bucket for LUNs (string value)
+#nexenta_lun_container =
+
+# NexentaEdge iSCSI service name (string value)
+#nexenta_iscsi_service =
+
+# NexentaEdge iSCSI Gateway client address for non-VIP service (string value)
+#nexenta_client_address =
+
+# NexentaEdge iSCSI LUN object chunk size (integer value)
+#nexenta_chunksize = 32768
+
+# File with the list of available NFS shares. (string value)
+#nfs_shares_config = /etc/cinder/nfs_shares
+
+# Create volumes as sparsed files which take no space. If set to False volume
+# is created as regular file. In such case volume creation takes a lot of time.
+# (boolean value)
+#nfs_sparsed_volumes = true
+
+# Create volumes as QCOW2 files rather than raw files. (boolean value)
+#nfs_qcow2_volumes = false
+
+# Base dir containing mount points for NFS shares. (string value)
+#nfs_mount_point_base = $state_path/mnt
+
+# Mount options passed to the NFS client. See section of the NFS man page for
+# details. (string value)
+#nfs_mount_options = <None>
+
+# The number of attempts to mount NFS shares before raising an error.  At least
+# one attempt will be made to mount an NFS share, regardless of the value
+# specified. (integer value)
+#nfs_mount_attempts = 3
+
+# Enable support for snapshots on the NFS driver. Platforms using libvirt
+# <1.2.7 will encounter issues with this feature. (boolean value)
+#nfs_snapshot_support = false
+
+# Nimble Controller pool name (string value)
+#nimble_pool_name = default
+
+# Nimble Subnet Label (string value)
+#nimble_subnet_label = *
+
+# Whether to verify Nimble SSL Certificate (boolean value)
+#nimble_verify_certificate = false
+
+# Path to Nimble Array SSL certificate (string value)
+#nimble_verify_cert_path = <None>
+
+# DPL pool uuid in which DPL volumes are stored. (string value)
+#dpl_pool =
+
+# DPL port number. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#dpl_port = 8357
+
+# REST API authorization token. (string value)
+#pure_api_token = <None>
+
+# Automatically determine an oversubscription ratio based on the current total
+# data reduction values. If used this calculated value will override the
+# max_over_subscription_ratio config option. (boolean value)
+#pure_automatic_max_oversubscription_ratio = true
+
+# Snapshot replication interval in seconds. (integer value)
+#pure_replica_interval_default = 3600
+
+# Retain all snapshots on target for this time (in seconds.) (integer value)
+#pure_replica_retention_short_term_default = 14400
+
+# Retain how many snapshots for each day. (integer value)
+#pure_replica_retention_long_term_per_day_default = 3
+
+# Retain snapshots per day on target for this time (in days.) (integer value)
+#pure_replica_retention_long_term_default = 7
+
+# When enabled, all Pure volumes, snapshots, and protection groups will be
+# eradicated at the time of deletion in Cinder. Data will NOT be recoverable
+# after a delete with this set to True! When disabled, volumes and snapshots
+# will go into pending eradication state and can be recovered. (boolean value)
+#pure_eradicate_on_delete = false
+
+# The URL to management QNAP Storage. Driver does not support IPv6 address in
+# URL. (uri value)
+#qnap_management_url = <None>
+
+# The pool name in the QNAP Storage (string value)
+#qnap_poolname = <None>
+
+# Communication protocol to access QNAP storage (string value)
+#qnap_storage_protocol = iscsi
+
+# Quobyte URL to the Quobyte volume using e.g. a DNS SRV record (preferred) or
+# a host list (alternatively) like quobyte://<DIR host1>, <DIR host2>/<volume
+# name> (string value)
+#quobyte_volume_url = <None>
+
+# Path to a Quobyte Client configuration file. (string value)
+#quobyte_client_cfg = <None>
+
+# Create volumes as sparse files which take no space. If set to False, volume
+# is created as regular file. (boolean value)
+#quobyte_sparsed_volumes = true
+
+# Create volumes as QCOW2 files rather than raw files. (boolean value)
+#quobyte_qcow2_volumes = true
+
+# Base dir containing the mount point for the Quobyte volume. (string value)
+#quobyte_mount_point_base = $state_path/mnt
+
+# Create a cache of volumes from merged snapshots to speed up creation of
+# multiple volumes from a single snapshot. (boolean value)
+#quobyte_volume_from_snapshot_cache = false
+
+# The name of ceph cluster (string value)
+#rbd_cluster_name = ceph
+
+# The RADOS pool where rbd volumes are stored (string value)
+#rbd_pool = rbd
+
+# The RADOS client name for accessing rbd volumes - only set when using cephx
+# authentication (string value)
+#rbd_user = <None>
+
+# Path to the ceph configuration file (string value)
+#rbd_ceph_conf =
+
+# Path to the ceph keyring file (string value)
+#rbd_keyring_conf =
+
+# Flatten volumes created from snapshots to remove dependency from volume to
+# snapshot (boolean value)
+#rbd_flatten_volume_from_snapshot = false
+
+# The libvirt uuid of the secret for the rbd_user volumes (string value)
+#rbd_secret_uuid = <None>
+
+# Maximum number of nested volume clones that are taken before a flatten
+# occurs. Set to 0 to disable cloning. (integer value)
+#rbd_max_clone_depth = 5
+
+# Volumes will be chunked into objects of this size (in megabytes). (integer
+# value)
+#rbd_store_chunk_size = 4
+
+# Timeout value (in seconds) used when connecting to ceph cluster. If value <
+# 0, no timeout is set and default librados value is used. (integer value)
+#rados_connect_timeout = -1
+
+# Number of retries if connection to ceph cluster failed. (integer value)
+#rados_connection_retries = 3
+
+# Interval value (in seconds) between connection retries to ceph cluster.
+# (integer value)
+#rados_connection_interval = 5
+
+# Timeout value (in seconds) used when connecting to ceph cluster to do a
+# demotion/promotion of volumes. If value < 0, no timeout is set and default
+# librados value is used. (integer value)
+#replication_connect_timeout = 5
+
+# Set to True for driver to report total capacity as a dynamic value -used +
+# current free- and to False to report a static value -quota max bytes if
+# defined and global size of cluster if not. (boolean value)
+#report_dynamic_total_capacity = true
+
+# Set to True if the pool is used exclusively by Cinder. On exclusive use
+# driver won't query images' provisioned size as they will match the value
+# calculated by the Cinder core code for allocated_capacity_gb. This reduces
+# the load on the Ceph cluster as well as on the volume service. (boolean
+# value)
+#rbd_exclusive_cinder_pool = false
+
+# IP address or Hostname of NAS system. (string value)
+#nas_host =
+
+# User name to connect to NAS system. (string value)
+#nas_login = admin
+
+# Password to connect to NAS system. (string value)
+#nas_password =
+
+# SSH port to use to connect to NAS system. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nas_ssh_port = 22
+
+# Filename of private key to use for SSH authentication. (string value)
+#nas_private_key =
+
+# Allow network-attached storage systems to operate in a secure environment
+# where root level access is not permitted. If set to False, access is as the
+# root user and insecure. If set to True, access is not as root. If set to
+# auto, a check is done to determine if this is a new installation: True is
+# used if so, otherwise False. Default is auto. (string value)
+#nas_secure_file_operations = auto
+
+# Set more secure file permissions on network-attached storage volume files to
+# restrict broad other/world access. If set to False, volumes are created with
+# open permissions. If set to True, volumes are created with permissions for
+# the cinder user and group (660). If set to auto, a check is done to determine
+# if this is a new installation: True is used if so, otherwise False. Default
+# is auto. (string value)
+#nas_secure_file_permissions = auto
+
+# Path to the share to use for storing Cinder volumes. For example:
+# "/srv/export1" for an NFS server export available at 10.0.5.10:/srv/export1 .
+# (string value)
+#nas_share_path =
+
+# Options used to mount the storage backend file system where Cinder volumes
+# are stored. (string value)
+#nas_mount_options = <None>
+
+# Provisioning type that will be used when creating volumes. (string value)
+# Possible values:
+# thin - <No description provided>
+# thick - <No description provided>
+#nas_volume_prov_type = thin
+
+# Pool or Vdisk name to use for volume creation. (string value)
+#hpmsa_backend_name = A
+
+# linear (for Vdisk) or virtual (for Pool). (string value)
+# Possible values:
+# linear - <No description provided>
+# virtual - <No description provided>
+#hpmsa_backend_type = virtual
+
+# HPMSA API interface protocol. (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+#hpmsa_api_protocol = https
+
+# Whether to verify HPMSA array SSL certificate. (boolean value)
+#hpmsa_verify_certificate = false
+
+# HPMSA array SSL certificate path. (string value)
+#hpmsa_verify_certificate_path = <None>
+
+# List of comma-separated target iSCSI IP addresses. (list value)
+#hpmsa_iscsi_ips =
+
+# Use thin provisioning for SAN volumes? (boolean value)
+#san_thin_provision = true
+
+# IP address of SAN controller (string value)
+#san_ip =
+
+# Username for SAN controller (string value)
+#san_login = admin
+
+# Password for SAN controller (string value)
+#san_password =
+
+# Filename of private key to use for SSH authentication (string value)
+#san_private_key =
+
+# Cluster name to use for creating volumes (string value)
+#san_clustername =
+
+# SSH port to use with SAN (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#san_ssh_port = 22
+
+# Port to use to access the SAN API (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#san_api_port = <None>
+
+# Execute commands locally instead of over SSH; use if the volume service is
+# running on the SAN device (boolean value)
+#san_is_local = false
+
+# SSH connection timeout in seconds (integer value)
+#ssh_conn_timeout = 30
+
+# Minimum ssh connections in the pool (integer value)
+#ssh_min_pool_conn = 1
+
+# Maximum ssh connections in the pool (integer value)
+#ssh_max_pool_conn = 5
+
+# IP address of sheep daemon. (string value)
+#sheepdog_store_address = 127.0.0.1
+
+# Port of sheep daemon. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#sheepdog_store_port = 7000
+
+# Set 512 byte emulation on volume creation;  (boolean value)
+#sf_emulate_512 = true
+
+# Allow tenants to specify QOS on create (boolean value)
+#sf_allow_tenant_qos = false
+
+# Create SolidFire accounts with this prefix. Any string can be used here, but
+# the string "hostname" is special and will create a prefix using the cinder
+# node hostname (previous default behavior).  The default is NO prefix. (string
+# value)
+#sf_account_prefix = <None>
+
+# Create SolidFire volumes with this prefix. Volume names are of the form
+# <sf_volume_prefix><cinder-volume-id>.  The default is to use a prefix of
+# 'UUID-'. (string value)
+#sf_volume_prefix = UUID-
+
+# Account name on the SolidFire Cluster to use as owner of template/cache
+# volumes (created if does not exist). (string value)
+#sf_template_account_name = openstack-vtemplate
+
+# DEPRECATED: This option is deprecated and will be removed in the next
+# OpenStack release.  Please use the general cinder image-caching feature
+# instead. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The Cinder caching feature should be used rather than this driver
+# specific implementation.
+#sf_allow_template_caching = false
+
+# Overrides default cluster SVIP with the one specified. This is required or
+# deployments that have implemented the use of VLANs for iSCSI networks in
+# their cloud. (string value)
+#sf_svip = <None>
+
+# SolidFire API port. Useful if the device api is behind a proxy on a different
+# port. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#sf_api_port = 443
+
+# Utilize volume access groups on a per-tenant basis. (boolean value)
+#sf_enable_vag = false
+
+# Volume on Synology storage to be used for creating lun. (string value)
+#synology_pool_name =
+
+# Management port for Synology storage. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#synology_admin_port = 5000
+
+# Administrator of Synology storage. (string value)
+#synology_username = admin
+
+# Password of administrator for logging in Synology storage. (string value)
+#synology_password =
+
+# Do certificate validation or not if $driver_use_ssl is True (boolean value)
+#synology_ssl_verify = true
+
+# One time password of administrator for logging in Synology storage if OTP is
+# enabled. (string value)
+#synology_one_time_pass = <None>
+
+# Device id for skip one time password check for logging in Synology storage if
+# OTP is enabled. (string value)
+#synology_device_id = <None>
+
+# The hostname (or IP address) for the storage system (string value)
+#tintri_server_hostname = <None>
+
+# User name for the storage system (string value)
+#tintri_server_username = <None>
+
+# Password for the storage system (string value)
+#tintri_server_password = <None>
+
+# API version for the storage system (string value)
+#tintri_api_version = v310
+
+# Delete unused image snapshots older than mentioned days (integer value)
+#tintri_image_cache_expiry_days = 30
+
+# Path to image nfs shares file (string value)
+#tintri_image_shares_config = <None>
+
+# IP address for connecting to VMware vCenter server. (string value)
+#vmware_host_ip = <None>
+
+# Port number for connecting to VMware vCenter server. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#vmware_host_port = 443
+
+# Username for authenticating with VMware vCenter server. (string value)
+#vmware_host_username = <None>
+
+# Password for authenticating with VMware vCenter server. (string value)
+#vmware_host_password = <None>
+
+# Optional VIM service WSDL Location e.g http://<server>/vimService.wsdl.
+# Optional over-ride to default location for bug work-arounds. (string value)
+#vmware_wsdl_location = <None>
+
+# Number of times VMware vCenter server API must be retried upon connection
+# related issues. (integer value)
+#vmware_api_retry_count = 10
+
+# The interval (in seconds) for polling remote tasks invoked on VMware vCenter
+# server. (floating point value)
+#vmware_task_poll_interval = 2.0
+
+# Name of the vCenter inventory folder that will contain Cinder volumes. This
+# folder will be created under "OpenStack/<project_folder>", where
+# project_folder is of format "Project (<volume_project_id>)". (string value)
+#vmware_volume_folder = Volumes
+
+# Timeout in seconds for VMDK volume transfer between Cinder and Glance.
+# (integer value)
+#vmware_image_transfer_timeout_secs = 7200
+
+# Max number of objects to be retrieved per batch. Query results will be
+# obtained in batches from the server and not in one shot. Server may still
+# limit the count to something less than the configured value. (integer value)
+#vmware_max_objects_retrieval = 100
+
+# Optional string specifying the VMware vCenter server version. The driver
+# attempts to retrieve the version from VMware vCenter server. Set this
+# configuration only if you want to override the vCenter server version.
+# (string value)
+#vmware_host_version = <None>
+
+# Directory where virtual disks are stored during volume backup and restore.
+# (string value)
+#vmware_tmp_dir = /tmp
+
+# CA bundle file to use in verifying the vCenter server certificate. (string
+# value)
+#vmware_ca_file = <None>
+
+# If true, the vCenter server certificate is not verified. If false, then the
+# default CA truststore is used for verification. This option is ignored if
+# "vmware_ca_file" is set. (boolean value)
+#vmware_insecure = false
+
+# Name of a vCenter compute cluster where volumes should be created. (multi
+# valued)
+#vmware_cluster_name =
+
+# Maximum number of connections in http connection pool. (integer value)
+#vmware_connection_pool_size = 10
+
+# Default adapter type to be used for attaching volumes. (string value)
+# Possible values:
+# lsiLogic - <No description provided>
+# busLogic - <No description provided>
+# lsiLogicsas - <No description provided>
+# paraVirtual - <No description provided>
+# ide - <No description provided>
+#vmware_adapter_type = lsiLogic
+
+# Volume snapshot format in vCenter server. (string value)
+# Possible values:
+# template - <No description provided>
+# COW - <No description provided>
+#vmware_snapshot_format = template
+
+# If true, the backend volume in vCenter server is created lazily when the
+# volume is created without any source. The backend volume is created when the
+# volume is attached, uploaded to image service or during backup. (boolean
+# value)
+#vmware_lazy_create = true
+
+# Regular expression pattern to match the name of datastores where backend
+# volumes are created. (string value)
+#vmware_datastore_regex = <None>
+
+# File with the list of available vzstorage shares. (string value)
+#vzstorage_shares_config = /etc/cinder/vzstorage_shares
+
+# Create volumes as sparsed files which take no space rather than regular files
+# when using raw format, in which case volume creation takes lot of time.
+# (boolean value)
+#vzstorage_sparsed_volumes = true
+
+# Percent of ACTUAL usage of the underlying volume before no new volumes can be
+# allocated to the volume destination. (floating point value)
+#vzstorage_used_ratio = 0.95
+
+# Base dir containing mount points for vzstorage shares. (string value)
+#vzstorage_mount_point_base = $state_path/mnt
+
+# Mount options passed to the vzstorage client. See section of the pstorage-
+# mount man page for details. (list value)
+#vzstorage_mount_options = <None>
+
+# Default format that will be used when creating volumes if no volume format is
+# specified. (string value)
+#vzstorage_default_volume_format = raw
+
+# Path to store VHD backed volumes (string value)
+#windows_iscsi_lun_path = C:\iSCSIVirtualDisks
+
+# File with the list of available smbfs shares. (string value)
+#smbfs_shares_config = C:\OpenStack\smbfs_shares.txt
+
+# Default format that will be used when creating volumes if no volume format is
+# specified. (string value)
+# Possible values:
+# vhd - <No description provided>
+# vhdx - <No description provided>
+#smbfs_default_volume_format = vhd
+
+# Base dir containing mount points for smbfs shares. (string value)
+#smbfs_mount_point_base = C:\OpenStack\_mnt
+
+# Mappings between share locations and pool names. If not specified, the share
+# names will be used as pool names. Example:
+# //addr/share:pool_name,//addr/share2:pool_name2 (dict value)
+#smbfs_pool_mappings =
+
+# VPSA - Use ISER instead of iSCSI (boolean value)
+#zadara_use_iser = true
+
+# VPSA - Management Host name or IP address (string value)
+#zadara_vpsa_host = <None>
+
+# VPSA - Port number (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#zadara_vpsa_port = <None>
+
+# VPSA - Use SSL connection (boolean value)
+#zadara_vpsa_use_ssl = false
+
+# If set to True the http client will validate the SSL certificate of the VPSA
+# endpoint. (boolean value)
+#zadara_ssl_cert_verify = true
+
+# VPSA - Username (string value)
+#zadara_user = <None>
+
+# VPSA - Password (string value)
+#zadara_password = <None>
+
+# VPSA - Storage Pool assigned for volumes (string value)
+#zadara_vpsa_poolname = <None>
+
+# VPSA - Default encryption policy for volumes (boolean value)
+#zadara_vol_encrypt = false
+
+# VPSA - Default template for VPSA volume names (string value)
+#zadara_vol_name_template = OS_%s
+
+# VPSA - Attach snapshot policy for volumes (boolean value)
+#zadara_default_snap_policy = false
+
+# Storage pool name. (string value)
+#zfssa_pool = <None>
+
+# Project name. (string value)
+#zfssa_project = <None>
+
+# Block size. (string value)
+# Possible values:
+# 512 - <No description provided>
+# 1k - <No description provided>
+# 2k - <No description provided>
+# 4k - <No description provided>
+# 8k - <No description provided>
+# 16k - <No description provided>
+# 32k - <No description provided>
+# 64k - <No description provided>
+# 128k - <No description provided>
+#zfssa_lun_volblocksize = 8k
+
+# Flag to enable sparse (thin-provisioned): True, False. (boolean value)
+#zfssa_lun_sparse = false
+
+# Data compression. (string value)
+# Possible values:
+# off - <No description provided>
+# lzjb - <No description provided>
+# gzip-2 - <No description provided>
+# gzip - <No description provided>
+# gzip-9 - <No description provided>
+#zfssa_lun_compression = off
+
+# Synchronous write bias. (string value)
+# Possible values:
+# latency - <No description provided>
+# throughput - <No description provided>
+#zfssa_lun_logbias = latency
+
+# iSCSI initiator group. (string value)
+#zfssa_initiator_group =
+
+# iSCSI initiator IQNs. (comma separated) (string value)
+#zfssa_initiator =
+
+# iSCSI initiator CHAP user (name). (string value)
+#zfssa_initiator_user =
+
+# Secret of the iSCSI initiator CHAP user. (string value)
+#zfssa_initiator_password =
+
+# iSCSI initiators configuration. (string value)
+#zfssa_initiator_config =
+
+# iSCSI target group name. (string value)
+#zfssa_target_group = tgt-grp
+
+# iSCSI target CHAP user (name). (string value)
+#zfssa_target_user =
+
+# Secret of the iSCSI target CHAP user. (string value)
+#zfssa_target_password =
+
+# iSCSI target portal (Data-IP:Port, w.x.y.z:3260). (string value)
+#zfssa_target_portal = <None>
+
+# Network interfaces of iSCSI targets. (comma separated) (string value)
+#zfssa_target_interfaces = <None>
+
+# REST connection timeout. (seconds) (integer value)
+#zfssa_rest_timeout = <None>
+
+# IP address used for replication data. (maybe the same as data ip) (string
+# value)
+#zfssa_replication_ip =
+
+# Flag to enable local caching: True, False. (boolean value)
+#zfssa_enable_local_cache = true
+
+# Name of ZFSSA project where cache volumes are stored. (string value)
+#zfssa_cache_project = os-cinder-cache
+
+# Driver policy for volume manage. (string value)
+# Possible values:
+# loose - <No description provided>
+# strict - <No description provided>
+#zfssa_manage_policy = loose
+
+# Data path IP address (string value)
+#zfssa_data_ip = <None>
+
+# HTTPS port number (string value)
+#zfssa_https_port = 443
+
+# Options to be passed while mounting share over nfs (string value)
+#zfssa_nfs_mount_options =
+
+# Storage pool name. (string value)
+#zfssa_nfs_pool =
+
+# Project name. (string value)
+#zfssa_nfs_project = NFSProject
+
+# Share name. (string value)
+#zfssa_nfs_share = nfs_share
+
+# Data compression. (string value)
+# Possible values:
+# off - <No description provided>
+# lzjb - <No description provided>
+# gzip-2 - <No description provided>
+# gzip - <No description provided>
+# gzip-9 - <No description provided>
+#zfssa_nfs_share_compression = off
+
+# Synchronous write bias-latency, throughput. (string value)
+# Possible values:
+# latency - <No description provided>
+# throughput - <No description provided>
+#zfssa_nfs_share_logbias = latency
+
+# Name of directory inside zfssa_nfs_share where cache volumes are stored.
+# (string value)
+#zfssa_cache_directory = os-cinder-cache
+
+# Driver to use for volume creation (string value)
+#volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
+
+# User defined capabilities, a JSON formatted string specifying key/value
+# pairs. The key/value pairs can be used by the CapabilitiesFilter to select
+# between backends when requests specify volume types. For example, specifying
+# a service level or the geographical location of a backend, then creating a
+# volume type to allow the user to select by these different properties.
+# (string value)
+#extra_capabilities = {}
+
+# Suppress requests library SSL certificate warnings. (boolean value)
+#suppress_requests_ssl_warnings = false
+
+# Size of the native threads pool for the backend.  Increase for backends that
+# heavily rely on this, like the RBD driver. (integer value)
+# Minimum value: 20
+#backend_native_threads_pool_size = 20
+
+
+[coordination]
+
+#
+# From cinder
+#
+
+# The backend URL to use for distributed coordination. (string value)
+#backend_url = file://$state_path
+
+
+[fc-zone-manager]
+
+#
+# From cinder
+#
+
+# South bound connector for zoning operation (string value)
+#brcd_sb_connector = HTTP
+
+# Southbound connector for zoning operation (string value)
+#cisco_sb_connector = cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI
+
+# FC Zone Driver responsible for zone management (string value)
+#zone_driver = cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver
+
+# Zoning policy configured by user; valid values include "initiator-target" or
+# "initiator" (string value)
+#zoning_policy = initiator-target
+
+# Comma separated list of Fibre Channel fabric names. This list of names is
+# used to retrieve other SAN credentials for connecting to each SAN fabric
+# (string value)
+#fc_fabric_names = <None>
+
+# FC SAN Lookup Service (string value)
+#fc_san_lookup_service = cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService
+
+# Set this to True when you want to allow an unsupported zone manager driver to
+# start.  Drivers that haven't maintained a working CI system and testing are
+# marked as unsupported until CI is working again.  This also marks a driver as
+# deprecated and may be removed in the next release. (boolean value)
+#enable_unsupported_driver = false
+
+
+[nova]
+
+#
+# From cinder
+#
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#interface = public
+
+# The authentication URL for the nova connection when using the current users
+# token (string value)
+#token_auth_url = <None>
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile = <None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile = <None>
+
+# PEM encoded client certificate key file (string value)
+#keyfile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+
+[service_user]
+
+#
+# From cinder
+#
+
+#
+# When True, if sending a user token to an REST API, also send a service token.
+#  (boolean value)
+#send_service_user_token = false
+[barbican]
+#
+# From castellan.config
+#
+
+# Use this endpoint to connect to Barbican, for example:
+# "http://localhost:9311/" (string value)
+#barbican_endpoint = <None>
+
+# Version of the Barbican API, for example: "v1" (string value)
+#barbican_api_version = <None>
+
+# Use this endpoint to connect to Keystone (string value)
+# Deprecated group/name - [key_manager]/auth_url
+#auth_endpoint = http://localhost/identity/v3
+auth_endpoint = http://172.16.10.36:35357/v3
+
+# Number of seconds to wait before retrying poll for key creation completion
+# (integer value)
+#retry_delay = 1
+
+# Number of times to retry poll for key creation completion (integer value)
+#number_of_retries = 60
+
+# Specifies if insecure TLS (https) requests. If False, the server's
+# certificate will not be validated (boolean value)
+#verify_ssl = true
+
+# Specifies the type of endpoint.  Allowed values are: public, internal, and
+# admin (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+#barbican_endpoint_type = public
+barbican_endpoint_type = internal
+
+
+[key_manager]
+#
+# From castellan.config
+#
+
+# Specify the key manager implementation. Options are "barbican" and "vault".
+# Default is  "barbican". Will support the  values earlier set using
+# [key_manager]/api_class for some time. (string value)
+# Deprecated group/name - [key_manager]/api_class
+#backend = barbican
+backend = barbican
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = cinder
+
+[keystone_authtoken]
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
+# Deprecated group/name - [keystone_authtoken]/auth_uri
+#www_authenticate_uri = <None>
+www_authenticate_uri = http://172.16.10.36:5000
+
+# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
+# be an "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. This option
+# is deprecated in favor of www_authenticate_uri and will be removed in the S
+# release. (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
+#auth_uri = <None>
+auth_uri = http://172.16.10.36:5000
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Request environment key where the Swift cache object is stored. When
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [keystone_authtoken]/memcache_servers
+#memcached_servers = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
+
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#hash_algorithms = md5
+
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
+#service_token_roles = service
+
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
+#service_token_roles_required = false
+
+# Authentication type to load (string value)
+# Deprecated group/name - [keystone_authtoken]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = cinder
+
+[profiler]
+
+[oslo_concurrency]
 
 [database]
-connection = sqlite:////var/lib/cinder/cinder.sqlite
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = mysql+pymysql://cinder:opnfv_secret@172.16.10.36/cinder?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 280
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
+#db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[oslo_reports]

2019-11-21 06:36:15,964 [salt.state       :1951][INFO    ][5230] Completed state [/etc/cinder/cinder.conf] at time 06:36:15.963983 duration_in_ms=395.106
2019-11-21 06:36:15,965 [salt.state       :1780][INFO    ][5230] Running state [/etc/cinder/api-paste.ini] at time 06:36:15.965085
2019-11-21 06:36:15,965 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/cinder/api-paste.ini]
2019-11-21 06:36:15,988 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/files/rocky/api-paste.ini.controller.Debian'
2019-11-21 06:36:16,052 [salt.state       :300 ][INFO    ][5230] {'mode': '0640'}
2019-11-21 06:36:16,053 [salt.state       :1951][INFO    ][5230] Completed state [/etc/cinder/api-paste.ini] at time 06:36:16.053150 duration_in_ms=88.064
2019-11-21 06:36:16,055 [salt.state       :1780][INFO    ][5230] Running state [cinder-manage db sync; sleep 5;] at time 06:36:16.054793
2019-11-21 06:36:16,055 [salt.state       :1813][INFO    ][5230] Executing state cmd.run for [cinder-manage db sync; sleep 5;]
2019-11-21 06:36:16,055 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command 'cinder-manage db sync; sleep 5;' in directory '/root'
2019-11-21 06:36:25,723 [salt.state       :300 ][INFO    ][5230] {'pid': 6420, 'retcode': 0, 'stderr': '', 'stdout': '2019-11-21 06:36:18.761 6421 INFO migrate.versioning.api [-] 84 -> 85... \x1b[00m\n2019-11-21 06:36:19.520 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.520 6421 INFO migrate.versioning.api [-] 85 -> 86... \x1b[00m\n2019-11-21 06:36:19.550 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.550 6421 INFO migrate.versioning.api [-] 86 -> 87... \x1b[00m\n2019-11-21 06:36:19.590 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.590 6421 INFO migrate.versioning.api [-] 87 -> 88... \x1b[00m\n2019-11-21 06:36:19.683 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.683 6421 INFO migrate.versioning.api [-] 88 -> 89... \x1b[00m\n2019-11-21 06:36:19.726 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.726 6421 INFO migrate.versioning.api [-] 89 -> 90... \x1b[00m\n2019-11-21 06:36:19.780 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.780 6421 INFO migrate.versioning.api [-] 90 -> 91... \x1b[00m\n2019-11-21 06:36:19.812 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.812 6421 INFO migrate.versioning.api [-] 91 -> 92... \x1b[00m\n2019-11-21 06:36:19.817 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.817 6421 INFO migrate.versioning.api [-] 92 -> 93... \x1b[00m\n2019-11-21 06:36:19.822 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.822 6421 INFO migrate.versioning.api [-] 93 -> 94... \x1b[00m\n2019-11-21 06:36:19.827 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.827 6421 INFO migrate.versioning.api [-] 94 -> 95... \x1b[00m\n2019-11-21 06:36:19.832 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.832 6421 INFO migrate.versioning.api [-] 95 -> 96... \x1b[00m\n2019-11-21 06:36:19.837 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.838 6421 INFO migrate.versioning.api [-] 96 -> 97... \x1b[00m\n2019-11-21 06:36:19.858 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.858 6421 INFO migrate.versioning.api [-] 97 -> 98... \x1b[00m\n2019-11-21 06:36:19.878 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.878 6421 INFO migrate.versioning.api [-] 98 -> 99... \x1b[00m\n2019-11-21 06:36:19.916 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.916 6421 INFO migrate.versioning.api [-] 99 -> 100... \x1b[00m\n2019-11-21 06:36:19.922 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding attachment_specs_attachment_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.926 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding cgsnapshots_consistencygroup_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.929 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding group_snapshots_group_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.932 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding group_type_specs_group_type_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.934 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding group_volume_type_mapping_group_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.937 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding group_volume_type_mapping_volume_type_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.940 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding quality_of_service_specs_specs_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.943 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding reservations_allocated_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.946 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding reservations_usage_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.948 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding snapshot_metadata_snapshot_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.952 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding snapshots_cgsnapshot_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.955 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding snapshots_group_snapshot_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.958 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding snapshots_volume_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.960 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding transfers_volume_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.963 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_admin_metadata_volume_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.966 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_attachment_volume_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.969 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_glance_metadata_snapshot_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.971 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_glance_metadata_volume_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.974 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_metadata_volume_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.977 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_type_extra_specs_volume_type_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.979 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_types_qos_specs_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.983 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding volumes_consistencygroup_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.986 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding volumes_group_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.989 6421 INFO 100_add_foreign_key_indexes [-] Skipped adding workers_service_id_idx because an equivalent index already exists.\x1b[00m\n2019-11-21 06:36:19.994 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:19.995 6421 INFO migrate.versioning.api [-] 100 -> 101... \x1b[00m\n2019-11-21 06:36:20.011 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.011 6421 INFO migrate.versioning.api [-] 101 -> 102... \x1b[00m\n2019-11-21 06:36:20.051 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.051 6421 INFO migrate.versioning.api [-] 102 -> 103... \x1b[00m\n2019-11-21 06:36:20.121 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.121 6421 INFO migrate.versioning.api [-] 103 -> 104... \x1b[00m\n2019-11-21 06:36:20.169 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.169 6421 INFO migrate.versioning.api [-] 104 -> 105... \x1b[00m\n2019-11-21 06:36:20.193 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.194 6421 INFO migrate.versioning.api [-] 105 -> 106... \x1b[00m\n2019-11-21 06:36:20.199 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.199 6421 INFO migrate.versioning.api [-] 106 -> 107... \x1b[00m\n2019-11-21 06:36:20.205 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.205 6421 INFO migrate.versioning.api [-] 107 -> 108... \x1b[00m\n2019-11-21 06:36:20.210 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.210 6421 INFO migrate.versioning.api [-] 108 -> 109... \x1b[00m\n2019-11-21 06:36:20.216 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.216 6421 INFO migrate.versioning.api [-] 109 -> 110... \x1b[00m\n2019-11-21 06:36:20.221 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.221 6421 INFO migrate.versioning.api [-] 110 -> 111... \x1b[00m\n2019-11-21 06:36:20.241 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.242 6421 INFO migrate.versioning.api [-] 111 -> 112... \x1b[00m\n2019-11-21 06:36:20.281 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.281 6421 INFO migrate.versioning.api [-] 112 -> 113... \x1b[00m\n2019-11-21 06:36:20.310 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.310 6421 INFO migrate.versioning.api [-] 113 -> 114... \x1b[00m\n2019-11-21 06:36:20.396 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.396 6421 INFO migrate.versioning.api [-] 114 -> 115... \x1b[00m\n2019-11-21 06:36:20.446 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.446 6421 INFO migrate.versioning.api [-] 115 -> 116... \x1b[00m\n2019-11-21 06:36:20.489 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.490 6421 INFO migrate.versioning.api [-] 116 -> 117... \x1b[00m\n2019-11-21 06:36:20.523 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.523 6421 INFO migrate.versioning.api [-] 117 -> 118... \x1b[00m\n2019-11-21 06:36:20.529 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.529 6421 INFO migrate.versioning.api [-] 118 -> 119... \x1b[00m\n2019-11-21 06:36:20.534 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.534 6421 INFO migrate.versioning.api [-] 119 -> 120... \x1b[00m\n2019-11-21 06:36:20.539 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.539 6421 INFO migrate.versioning.api [-] 120 -> 121... \x1b[00m\n2019-11-21 06:36:20.545 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.545 6421 INFO migrate.versioning.api [-] 121 -> 122... \x1b[00m\n2019-11-21 06:36:20.550 6421 INFO migrate.versioning.api [-] done\x1b[00m\n2019-11-21 06:36:20.550 6421 INFO migrate.versioning.api [-] 122 -> 123... \x1b[00m\n2019-11-21 06:36:20.600 6421 INFO migrate.versioning.api [-] done\x1b[00m'}
2019-11-21 06:36:25,723 [salt.state       :1951][INFO    ][5230] Completed state [cinder-manage db sync; sleep 5;] at time 06:36:25.723651 duration_in_ms=9668.858
2019-11-21 06:36:25,724 [salt.state       :1780][INFO    ][5230] Running state [/etc/default/cinder-scheduler] at time 06:36:25.724693
2019-11-21 06:36:25,725 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/default/cinder-scheduler]
2019-11-21 06:36:25,750 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/files/default'
2019-11-21 06:36:25,762 [salt.state       :300 ][INFO    ][5230] File changed:
New file
2019-11-21 06:36:25,763 [salt.state       :1951][INFO    ][5230] Completed state [/etc/default/cinder-scheduler] at time 06:36:25.763069 duration_in_ms=38.376
2019-11-21 06:36:25,763 [salt.state       :1780][INFO    ][5230] Running state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 06:36:25.763806
2019-11-21 06:36:25,764 [salt.state       :1813][INFO    ][5230] Executing state file.managed for [/etc/apache2/conf-available/cinder-wsgi.conf]
2019-11-21 06:36:25,785 [salt.fileclient  :1219][INFO    ][5230] Fetching file from saltenv 'base', ** done ** 'cinder/files/rocky/cinder-wsgi.conf'
2019-11-21 06:36:25,850 [salt.state       :300 ][INFO    ][5230] File changed:
New file
2019-11-21 06:36:25,850 [salt.state       :1951][INFO    ][5230] Completed state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 06:36:25.850736 duration_in_ms=86.929
2019-11-21 06:36:25,852 [salt.state       :1780][INFO    ][5230] Running state [cinder-wsgi] at time 06:36:25.852468
2019-11-21 06:36:25,852 [salt.state       :1813][INFO    ][5230] Executing state apache_conf.enabled for [cinder-wsgi]
2019-11-21 06:36:25,853 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['a2enconf', 'cinder-wsgi'] in directory '/root'
2019-11-21 06:36:25,916 [salt.state       :300 ][INFO    ][5230] {'new': 'cinder-wsgi', 'old': None}
2019-11-21 06:36:25,917 [salt.state       :1951][INFO    ][5230] Completed state [cinder-wsgi] at time 06:36:25.917265 duration_in_ms=64.796
2019-11-21 06:36:25,919 [salt.state       :1780][INFO    ][5230] Running state [cinder-api] at time 06:36:25.919377
2019-11-21 06:36:25,919 [salt.state       :1813][INFO    ][5230] Executing state service.dead for [cinder-api]
2019-11-21 06:36:25,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemctl', 'status', 'cinder-api.service', '-n', '0'] in directory '/root'
2019-11-21 06:36:25,939 [salt.state       :300 ][INFO    ][5230] The named service cinder-api is not available
2019-11-21 06:36:25,939 [salt.state       :1951][INFO    ][5230] Completed state [cinder-api] at time 06:36:25.939778 duration_in_ms=20.401
2019-11-21 06:36:25,943 [salt.state       :1780][INFO    ][5230] Running state [apache2] at time 06:36:25.943542
2019-11-21 06:36:25,943 [salt.state       :1813][INFO    ][5230] Executing state service.running for [apache2]
2019-11-21 06:36:25,944 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:36:25,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:36:25,983 [salt.state       :300 ][INFO    ][5230] The service apache2 is already running
2019-11-21 06:36:25,983 [salt.state       :1951][INFO    ][5230] Completed state [apache2] at time 06:36:25.983617 duration_in_ms=40.075
2019-11-21 06:36:25,983 [salt.state       :1780][INFO    ][5230] Running state [apache2] at time 06:36:25.983921
2019-11-21 06:36:25,984 [salt.state       :1813][INFO    ][5230] Executing state service.mod_watch for [apache2]
2019-11-21 06:36:25,985 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:36:26,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-11-21 06:36:28,268 [salt.state       :300 ][INFO    ][5230] {'apache2': True}
2019-11-21 06:36:28,270 [salt.state       :1951][INFO    ][5230] Completed state [apache2] at time 06:36:28.270049 duration_in_ms=2286.127
2019-11-21 06:36:28,272 [salt.state       :1780][INFO    ][5230] Running state [cinder-scheduler] at time 06:36:28.272897
2019-11-21 06:36:28,273 [salt.state       :1813][INFO    ][5230] Executing state service.running for [cinder-scheduler]
2019-11-21 06:36:28,275 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemctl', 'status', 'cinder-scheduler.service', '-n', '0'] in directory '/root'
2019-11-21 06:36:28,293 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2019-11-21 06:36:28,311 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemctl', 'is-enabled', 'cinder-scheduler.service'] in directory '/root'
2019-11-21 06:36:28,328 [salt.state       :300 ][INFO    ][5230] The service cinder-scheduler is already running
2019-11-21 06:36:28,328 [salt.state       :1951][INFO    ][5230] Completed state [cinder-scheduler] at time 06:36:28.328838 duration_in_ms=55.941
2019-11-21 06:36:28,329 [salt.state       :1780][INFO    ][5230] Running state [cinder-scheduler] at time 06:36:28.329312
2019-11-21 06:36:28,329 [salt.state       :1813][INFO    ][5230] Executing state service.mod_watch for [cinder-scheduler]
2019-11-21 06:36:28,330 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2019-11-21 06:36:28,349 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5230] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'cinder-scheduler.service'] in directory '/root'
2019-11-21 06:36:31,133 [salt.state       :300 ][INFO    ][5230] {'cinder-scheduler': True}
2019-11-21 06:36:31,133 [salt.state       :1951][INFO    ][5230] Completed state [cinder-scheduler] at time 06:36:31.133497 duration_in_ms=2804.185
2019-11-21 06:36:31,138 [salt.state       :1780][INFO    ][5230] Running state [lvm-driver] at time 06:36:31.137015
2019-11-21 06:36:31,139 [salt.state       :1813][INFO    ][5230] Executing state cinderv3.volume_type_present for [lvm-driver]
2019-11-21 06:36:38,121 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063638109405
2019-11-21 06:36:38,138 [salt.minion      :1432][INFO    ][7104] Starting a new job with PID 7104
2019-11-21 06:36:38,156 [salt.minion      :1711][INFO    ][7104] Returning information for job: 20191121063638109405
2019-11-21 06:36:56,534 [salt.state       :300 ][INFO    ][5230] {u'volume_type': {u'description': None, u'extra_specs': {}, u'os-volume-type-access:is_public': True, u'is_public': True, u'id': u'932b4949-5576-4b8b-8d4a-fb60e4495c47', u'name': u'lvm-driver'}}
2019-11-21 06:36:56,534 [salt.state       :1951][INFO    ][5230] Completed state [lvm-driver] at time 06:36:56.534637 duration_in_ms=25397.621
2019-11-21 06:36:56,535 [salt.state       :1780][INFO    ][5230] Running state [lvm-driver] at time 06:36:56.535595
2019-11-21 06:36:56,535 [salt.state       :1813][INFO    ][5230] Executing state cinderv3.volume_type_key_present for [lvm-driver]
2019-11-21 06:37:02,937 [salt.state       :300 ][INFO    ][5230] {u'volume_backend_name': u'lvm-driver'}
2019-11-21 06:37:02,937 [salt.state       :1951][INFO    ][5230] Completed state [lvm-driver] at time 06:37:02.937467 duration_in_ms=6401.871
2019-11-21 06:37:02,947 [salt.minion      :1711][INFO    ][5230] Returning information for job: 20191121063552805107
2019-11-21 06:37:03,572 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121063703560175
2019-11-21 06:37:03,593 [salt.minion      :1432][INFO    ][7363] Starting a new job with PID 7363
2019-11-21 06:37:10,163 [salt.state       :915 ][INFO    ][7363] Loading fresh modules for state activity
2019-11-21 06:37:12,175 [keyring.backend  :154 ][INFO    ][7363] Loading Windows (alt)
2019-11-21 06:37:12,179 [keyring.backend  :154 ][INFO    ][7363] Loading pyfs
2019-11-21 06:37:12,180 [keyring.backend  :154 ][INFO    ][7363] Loading multi
2019-11-21 06:37:12,181 [keyring.backend  :154 ][INFO    ][7363] Loading Google
2019-11-21 06:37:12,182 [keyring.backend  :154 ][INFO    ][7363] Loading Gnome
2019-11-21 06:37:12,187 [keyring.backend  :154 ][INFO    ][7363] Loading keyczar
2019-11-21 06:37:12,188 [keyring.backend  :154 ][INFO    ][7363] Loading file
2019-11-21 06:37:12,188 [keyring.backend  :154 ][INFO    ][7363] Loading kwallet
2019-11-21 06:37:13,048 [salt.state       :1780][INFO    ][7363] Running state [apache2] at time 06:37:13.048388
2019-11-21 06:37:13,048 [salt.state       :1813][INFO    ][7363] Executing state pkg.installed for [apache2]
2019-11-21 06:37:13,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7363] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:37:13,455 [salt.state       :300 ][INFO    ][7363] All specified packages are already installed
2019-11-21 06:37:13,455 [salt.state       :1951][INFO    ][7363] Completed state [apache2] at time 06:37:13.455693 duration_in_ms=407.306
2019-11-21 06:37:13,456 [salt.state       :1780][INFO    ][7363] Running state [openssl] at time 06:37:13.456034
2019-11-21 06:37:13,456 [salt.state       :1813][INFO    ][7363] Executing state pkg.installed for [openssl]
2019-11-21 06:37:13,465 [salt.state       :300 ][INFO    ][7363] All specified packages are already installed
2019-11-21 06:37:13,465 [salt.state       :1951][INFO    ][7363] Completed state [openssl] at time 06:37:13.465775 duration_in_ms=9.741
2019-11-21 06:37:13,466 [salt.state       :1780][INFO    ][7363] Running state [a2enmod ssl] at time 06:37:13.466462
2019-11-21 06:37:13,466 [salt.state       :1813][INFO    ][7363] Executing state cmd.run for [a2enmod ssl]
2019-11-21 06:37:13,467 [salt.state       :300 ][INFO    ][7363] /etc/apache2/mods-enabled/ssl.load exists
2019-11-21 06:37:13,467 [salt.state       :1951][INFO    ][7363] Completed state [a2enmod ssl] at time 06:37:13.467288 duration_in_ms=0.826
2019-11-21 06:37:13,467 [salt.state       :1780][INFO    ][7363] Running state [a2enmod rewrite] at time 06:37:13.467852
2019-11-21 06:37:13,468 [salt.state       :1813][INFO    ][7363] Executing state cmd.run for [a2enmod rewrite]
2019-11-21 06:37:13,468 [salt.state       :300 ][INFO    ][7363] /etc/apache2/mods-enabled/rewrite.load exists
2019-11-21 06:37:13,468 [salt.state       :1951][INFO    ][7363] Completed state [a2enmod rewrite] at time 06:37:13.468703 duration_in_ms=0.85
2019-11-21 06:37:13,469 [salt.state       :1780][INFO    ][7363] Running state [libapache2-mod-wsgi] at time 06:37:13.469271
2019-11-21 06:37:13,469 [salt.state       :1813][INFO    ][7363] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-11-21 06:37:13,478 [salt.state       :300 ][INFO    ][7363] All specified packages are already installed
2019-11-21 06:37:13,478 [salt.state       :1951][INFO    ][7363] Completed state [libapache2-mod-wsgi] at time 06:37:13.478838 duration_in_ms=9.566
2019-11-21 06:37:13,479 [salt.state       :1780][INFO    ][7363] Running state [a2enmod wsgi] at time 06:37:13.479401
2019-11-21 06:37:13,479 [salt.state       :1813][INFO    ][7363] Executing state cmd.run for [a2enmod wsgi]
2019-11-21 06:37:13,480 [salt.state       :300 ][INFO    ][7363] /etc/apache2/mods-enabled/wsgi.load exists
2019-11-21 06:37:13,480 [salt.state       :1951][INFO    ][7363] Completed state [a2enmod wsgi] at time 06:37:13.480183 duration_in_ms=0.782
2019-11-21 06:37:13,480 [salt.state       :1780][INFO    ][7363] Running state [a2enmod status -q] at time 06:37:13.480724
2019-11-21 06:37:13,480 [salt.state       :1813][INFO    ][7363] Executing state cmd.run for [a2enmod status -q]
2019-11-21 06:37:13,481 [salt.state       :300 ][INFO    ][7363] /etc/apache2/mods-enabled/status.load exists
2019-11-21 06:37:13,481 [salt.state       :1951][INFO    ][7363] Completed state [a2enmod status -q] at time 06:37:13.481520 duration_in_ms=0.796
2019-11-21 06:37:13,484 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:37:13.484942
2019-11-21 06:37:13,485 [salt.state       :1813][INFO    ][7363] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-11-21 06:37:13,485 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-11-21 06:37:13,485 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:37:13.485781 duration_in_ms=0.839
2019-11-21 06:37:13,486 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:37:13.486024
2019-11-21 06:37:13,486 [salt.state       :1813][INFO    ][7363] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-11-21 06:37:13,486 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-11-21 06:37:13,486 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:37:13.486754 duration_in_ms=0.73
2019-11-21 06:37:13,487 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:37:13.486991
2019-11-21 06:37:13,487 [salt.state       :1813][INFO    ][7363] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-11-21 06:37:13,487 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-11-21 06:37:13,487 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:37:13.487691 duration_in_ms=0.701
2019-11-21 06:37:13,487 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:37:13.487916
2019-11-21 06:37:13,488 [salt.state       :1813][INFO    ][7363] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-11-21 06:37:13,488 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-11-21 06:37:13,488 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:37:13.488601 duration_in_ms=0.684
2019-11-21 06:37:13,491 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 06:37:13.491257
2019-11-21 06:37:13,491 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-11-21 06:37:13,561 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-11-21 06:37:13,562 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 06:37:13.562470 duration_in_ms=71.213
2019-11-21 06:37:13,563 [salt.state       :1780][INFO    ][7363] Running state [a2enmod mpm_event] at time 06:37:13.563841
2019-11-21 06:37:13,564 [salt.state       :1813][INFO    ][7363] Executing state cmd.run for [a2enmod mpm_event]
2019-11-21 06:37:13,564 [salt.state       :300 ][INFO    ][7363] /etc/apache2/mods-enabled/mpm_event.load exists
2019-11-21 06:37:13,565 [salt.state       :1951][INFO    ][7363] Completed state [a2enmod mpm_event] at time 06:37:13.565361 duration_in_ms=1.52
2019-11-21 06:37:13,566 [salt.state       :1780][INFO    ][7363] Running state [apache_server_service_task] at time 06:37:13.566470
2019-11-21 06:37:13,566 [salt.state       :1813][INFO    ][7363] Executing state test.show_notification for [apache_server_service_task]
2019-11-21 06:37:13,567 [salt.state       :300 ][INFO    ][7363] Running apache.server.service
2019-11-21 06:37:13,567 [salt.state       :1951][INFO    ][7363] Completed state [apache_server_service_task] at time 06:37:13.567834 duration_in_ms=1.364
2019-11-21 06:37:13,568 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/ports.conf] at time 06:37:13.568631
2019-11-21 06:37:13,569 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/apache2/ports.conf]
2019-11-21 06:37:13,661 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/ports.conf is in the correct state
2019-11-21 06:37:13,662 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/ports.conf] at time 06:37:13.662029 duration_in_ms=93.397
2019-11-21 06:37:13,663 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/conf-available/security.conf] at time 06:37:13.663367
2019-11-21 06:37:13,664 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-11-21 06:37:13,736 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/conf-available/security.conf is in the correct state
2019-11-21 06:37:13,736 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/conf-available/security.conf] at time 06:37:13.736665 duration_in_ms=73.299
2019-11-21 06:37:13,751 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 06:37:13.751574
2019-11-21 06:37:13,752 [salt.state       :1813][INFO    ][7363] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-11-21 06:37:13,753 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-11-21 06:37:13,753 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 06:37:13.753449 duration_in_ms=1.875
2019-11-21 06:37:13,754 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:37:13.754294
2019-11-21 06:37:13,754 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-11-21 06:37:13,969 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-11-21 06:37:13,970 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:37:13.970041 duration_in_ms=215.746
2019-11-21 06:37:13,970 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:37:13.970924
2019-11-21 06:37:13,971 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-11-21 06:37:14,300 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-11-21 06:37:14,301 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:37:14.301005 duration_in_ms=330.08
2019-11-21 06:37:14,301 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:37:14.301738
2019-11-21 06:37:14,302 [salt.state       :1813][INFO    ][7363] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-11-21 06:37:14,303 [salt.state       :300 ][INFO    ][7363] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-11-21 06:37:14,304 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:37:14.304132 duration_in_ms=2.394
2019-11-21 06:37:14,304 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:37:14.304770
2019-11-21 06:37:14,305 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-11-21 06:37:14,522 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-11-21 06:37:14,523 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:37:14.523284 duration_in_ms=218.514
2019-11-21 06:37:14,524 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:37:14.524016
2019-11-21 06:37:14,524 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/apache2/sites-available/wsgi_openstack_web.conf]
2019-11-21 06:37:14,743 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/sites-available/wsgi_openstack_web.conf is in the correct state
2019-11-21 06:37:14,743 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:37:14.743723 duration_in_ms=219.706
2019-11-21 06:37:14,744 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:37:14.744435
2019-11-21 06:37:14,744 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-11-21 06:37:15,136 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-11-21 06:37:15,137 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:37:15.137204 duration_in_ms=392.769
2019-11-21 06:37:15,138 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:37:15.137961
2019-11-21 06:37:15,138 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-11-21 06:37:15,374 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-11-21 06:37:15,375 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:37:15.375077 duration_in_ms=237.115
2019-11-21 06:37:15,379 [salt.state       :1780][INFO    ][7363] Running state [apache2] at time 06:37:15.379813
2019-11-21 06:37:15,380 [salt.state       :1813][INFO    ][7363] Executing state service.running for [apache2]
2019-11-21 06:37:15,380 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7363] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-11-21 06:37:15,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7363] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:37:15,434 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7363] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:37:15,458 [salt.state       :300 ][INFO    ][7363] The service apache2 is already running
2019-11-21 06:37:15,459 [salt.state       :1951][INFO    ][7363] Completed state [apache2] at time 06:37:15.459199 duration_in_ms=79.386
2019-11-21 06:37:15,460 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/conf-enabled/security.conf] at time 06:37:15.460707
2019-11-21 06:37:15,461 [salt.state       :1813][INFO    ][7363] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-11-21 06:37:15,463 [salt.state       :300 ][INFO    ][7363] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-11-21 06:37:15,464 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/conf-enabled/security.conf] at time 06:37:15.464038 duration_in_ms=3.331
2019-11-21 06:37:15,464 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:37:15.464381
2019-11-21 06:37:15,464 [salt.state       :1813][INFO    ][7363] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-11-21 06:37:15,465 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-11-21 06:37:15,465 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:37:15.465394 duration_in_ms=1.013
2019-11-21 06:37:15,468 [salt.state       :1780][INFO    ][7363] Running state [cinder-scheduler] at time 06:37:15.467990
2019-11-21 06:37:15,468 [salt.state       :1813][INFO    ][7363] Executing state pkg.installed for [cinder-scheduler]
2019-11-21 06:37:15,479 [salt.state       :300 ][INFO    ][7363] All specified packages are already installed
2019-11-21 06:37:15,479 [salt.state       :1951][INFO    ][7363] Completed state [cinder-scheduler] at time 06:37:15.479685 duration_in_ms=11.696
2019-11-21 06:37:15,479 [salt.state       :1780][INFO    ][7363] Running state [lvm2] at time 06:37:15.479914
2019-11-21 06:37:15,480 [salt.state       :1813][INFO    ][7363] Executing state pkg.installed for [lvm2]
2019-11-21 06:37:15,489 [salt.state       :300 ][INFO    ][7363] All specified packages are already installed
2019-11-21 06:37:15,489 [salt.state       :1951][INFO    ][7363] Completed state [lvm2] at time 06:37:15.489349 duration_in_ms=9.435
2019-11-21 06:37:15,489 [salt.state       :1780][INFO    ][7363] Running state [python-cinder] at time 06:37:15.489596
2019-11-21 06:37:15,489 [salt.state       :1813][INFO    ][7363] Executing state pkg.installed for [python-cinder]
2019-11-21 06:37:15,508 [salt.state       :300 ][INFO    ][7363] All specified packages are already installed
2019-11-21 06:37:15,508 [salt.state       :1951][INFO    ][7363] Completed state [python-cinder] at time 06:37:15.508594 duration_in_ms=18.996
2019-11-21 06:37:15,509 [salt.state       :1780][INFO    ][7363] Running state [gettext-base] at time 06:37:15.509145
2019-11-21 06:37:15,509 [salt.state       :1813][INFO    ][7363] Executing state pkg.installed for [gettext-base]
2019-11-21 06:37:15,530 [salt.state       :300 ][INFO    ][7363] All specified packages are already installed
2019-11-21 06:37:15,530 [salt.state       :1951][INFO    ][7363] Completed state [gettext-base] at time 06:37:15.530749 duration_in_ms=21.603
2019-11-21 06:37:15,531 [salt.state       :1780][INFO    ][7363] Running state [python-memcache] at time 06:37:15.531122
2019-11-21 06:37:15,531 [salt.state       :1813][INFO    ][7363] Executing state pkg.installed for [python-memcache]
2019-11-21 06:37:15,545 [salt.state       :300 ][INFO    ][7363] All specified packages are already installed
2019-11-21 06:37:15,546 [salt.state       :1951][INFO    ][7363] Completed state [python-memcache] at time 06:37:15.545950 duration_in_ms=14.828
2019-11-21 06:37:15,546 [salt.state       :1780][INFO    ][7363] Running state [python-pycadf] at time 06:37:15.546344
2019-11-21 06:37:15,546 [salt.state       :1813][INFO    ][7363] Executing state pkg.installed for [python-pycadf]
2019-11-21 06:37:15,560 [salt.state       :300 ][INFO    ][7363] All specified packages are already installed
2019-11-21 06:37:15,561 [salt.state       :1951][INFO    ][7363] Completed state [python-pycadf] at time 06:37:15.560994 duration_in_ms=14.649
2019-11-21 06:37:15,563 [salt.state       :1780][INFO    ][7363] Running state [cinder_controller_ssl_mysql] at time 06:37:15.563537
2019-11-21 06:37:15,563 [salt.state       :1813][INFO    ][7363] Executing state test.show_notification for [cinder_controller_ssl_mysql]
2019-11-21 06:37:15,564 [salt.state       :300 ][INFO    ][7363] Running cinder._ssl.controller_mysql
2019-11-21 06:37:15,564 [salt.state       :1951][INFO    ][7363] Completed state [cinder_controller_ssl_mysql] at time 06:37:15.564670 duration_in_ms=1.134
2019-11-21 06:37:15,565 [salt.state       :1780][INFO    ][7363] Running state [cinder_controller_ssl_rabbitmq] at time 06:37:15.565506
2019-11-21 06:37:15,565 [salt.state       :1813][INFO    ][7363] Executing state test.show_notification for [cinder_controller_ssl_rabbitmq]
2019-11-21 06:37:15,566 [salt.state       :300 ][INFO    ][7363] Running cinder._ssl.rabbitmq
2019-11-21 06:37:15,566 [salt.state       :1951][INFO    ][7363] Completed state [cinder_controller_ssl_rabbitmq] at time 06:37:15.566610 duration_in_ms=1.104
2019-11-21 06:37:15,568 [salt.state       :1780][INFO    ][7363] Running state [/etc/cinder/cinder.conf] at time 06:37:15.568041
2019-11-21 06:37:15,568 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/cinder/cinder.conf]
2019-11-21 06:37:15,960 [salt.state       :300 ][INFO    ][7363] File /etc/cinder/cinder.conf is in the correct state
2019-11-21 06:37:15,961 [salt.state       :1951][INFO    ][7363] Completed state [/etc/cinder/cinder.conf] at time 06:37:15.961274 duration_in_ms=393.233
2019-11-21 06:37:15,962 [salt.state       :1780][INFO    ][7363] Running state [/etc/cinder/api-paste.ini] at time 06:37:15.962629
2019-11-21 06:37:15,963 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/cinder/api-paste.ini]
2019-11-21 06:37:16,042 [salt.state       :300 ][INFO    ][7363] File /etc/cinder/api-paste.ini is in the correct state
2019-11-21 06:37:16,043 [salt.state       :1951][INFO    ][7363] Completed state [/etc/cinder/api-paste.ini] at time 06:37:16.043110 duration_in_ms=80.48
2019-11-21 06:37:16,044 [salt.state       :1780][INFO    ][7363] Running state [cinder-manage db sync; sleep 5;] at time 06:37:16.044345
2019-11-21 06:37:16,044 [salt.state       :1813][INFO    ][7363] Executing state cmd.run for [cinder-manage db sync; sleep 5;]
2019-11-21 06:37:16,045 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7363] Executing command 'cinder-manage db sync; sleep 5;' in directory '/root'
2019-11-21 06:37:18,643 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063718632052
2019-11-21 06:37:18,659 [salt.minion      :1432][INFO    ][7537] Starting a new job with PID 7537
2019-11-21 06:37:18,677 [salt.minion      :1711][INFO    ][7537] Returning information for job: 20191121063718632052
2019-11-21 06:37:24,182 [salt.state       :300 ][INFO    ][7363] {'pid': 7528, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:37:24,182 [salt.state       :1951][INFO    ][7363] Completed state [cinder-manage db sync; sleep 5;] at time 06:37:24.182848 duration_in_ms=8138.501
2019-11-21 06:37:24,184 [salt.state       :1780][INFO    ][7363] Running state [/etc/default/cinder-scheduler] at time 06:37:24.184390
2019-11-21 06:37:24,184 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/default/cinder-scheduler]
2019-11-21 06:37:24,212 [salt.state       :300 ][INFO    ][7363] File /etc/default/cinder-scheduler is in the correct state
2019-11-21 06:37:24,212 [salt.state       :1951][INFO    ][7363] Completed state [/etc/default/cinder-scheduler] at time 06:37:24.212860 duration_in_ms=28.47
2019-11-21 06:37:24,213 [salt.state       :1780][INFO    ][7363] Running state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 06:37:24.213492
2019-11-21 06:37:24,213 [salt.state       :1813][INFO    ][7363] Executing state file.managed for [/etc/apache2/conf-available/cinder-wsgi.conf]
2019-11-21 06:37:24,285 [salt.state       :300 ][INFO    ][7363] File /etc/apache2/conf-available/cinder-wsgi.conf is in the correct state
2019-11-21 06:37:24,285 [salt.state       :1951][INFO    ][7363] Completed state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 06:37:24.285450 duration_in_ms=71.958
2019-11-21 06:37:24,286 [salt.state       :1780][INFO    ][7363] Running state [cinder-wsgi] at time 06:37:24.286710
2019-11-21 06:37:24,286 [salt.state       :1813][INFO    ][7363] Executing state apache_conf.enabled for [cinder-wsgi]
2019-11-21 06:37:24,287 [salt.state       :300 ][INFO    ][7363] cinder-wsgi already enabled.
2019-11-21 06:37:24,287 [salt.state       :1951][INFO    ][7363] Completed state [cinder-wsgi] at time 06:37:24.287481 duration_in_ms=0.771
2019-11-21 06:37:24,288 [salt.state       :1780][INFO    ][7363] Running state [cinder-api] at time 06:37:24.288083
2019-11-21 06:37:24,288 [salt.state       :1813][INFO    ][7363] Executing state service.dead for [cinder-api]
2019-11-21 06:37:24,288 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7363] Executing command ['systemctl', 'status', 'cinder-api.service', '-n', '0'] in directory '/root'
2019-11-21 06:37:24,306 [salt.state       :300 ][INFO    ][7363] The named service cinder-api is not available
2019-11-21 06:37:24,306 [salt.state       :1951][INFO    ][7363] Completed state [cinder-api] at time 06:37:24.306692 duration_in_ms=18.609
2019-11-21 06:37:24,310 [salt.state       :1780][INFO    ][7363] Running state [apache2] at time 06:37:24.310150
2019-11-21 06:37:24,310 [salt.state       :1813][INFO    ][7363] Executing state service.running for [apache2]
2019-11-21 06:37:24,311 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7363] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:37:24,326 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7363] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:37:24,343 [salt.state       :300 ][INFO    ][7363] The service apache2 is already running
2019-11-21 06:37:24,344 [salt.state       :1951][INFO    ][7363] Completed state [apache2] at time 06:37:24.344008 duration_in_ms=33.858
2019-11-21 06:37:24,346 [salt.state       :1780][INFO    ][7363] Running state [cinder-scheduler] at time 06:37:24.346889
2019-11-21 06:37:24,347 [salt.state       :1813][INFO    ][7363] Executing state service.running for [cinder-scheduler]
2019-11-21 06:37:24,348 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7363] Executing command ['systemctl', 'status', 'cinder-scheduler.service', '-n', '0'] in directory '/root'
2019-11-21 06:37:24,365 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7363] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2019-11-21 06:37:24,385 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7363] Executing command ['systemctl', 'is-enabled', 'cinder-scheduler.service'] in directory '/root'
2019-11-21 06:37:24,404 [salt.state       :300 ][INFO    ][7363] The service cinder-scheduler is already running
2019-11-21 06:37:24,405 [salt.state       :1951][INFO    ][7363] Completed state [cinder-scheduler] at time 06:37:24.405123 duration_in_ms=58.233
2019-11-21 06:37:24,409 [salt.state       :1780][INFO    ][7363] Running state [lvm-driver] at time 06:37:24.409913
2019-11-21 06:37:24,410 [salt.state       :1813][INFO    ][7363] Executing state cinderv3.volume_type_present for [lvm-driver]
2019-11-21 06:37:25,528 [salt.state       :300 ][INFO    ][7363] volume_type lvm-driver is in desired state
2019-11-21 06:37:25,528 [salt.state       :1951][INFO    ][7363] Completed state [lvm-driver] at time 06:37:25.528241 duration_in_ms=1118.328
2019-11-21 06:37:25,529 [salt.state       :1780][INFO    ][7363] Running state [lvm-driver] at time 06:37:25.529207
2019-11-21 06:37:25,529 [salt.state       :1813][INFO    ][7363] Executing state cinderv3.volume_type_key_present for [lvm-driver]
2019-11-21 06:37:31,253 [salt.state       :300 ][INFO    ][7363] {u'volume_backend_name': u'lvm-driver'}
2019-11-21 06:37:31,253 [salt.state       :1951][INFO    ][7363] Completed state [lvm-driver] at time 06:37:31.253791 duration_in_ms=5724.583
2019-11-21 06:37:31,264 [salt.minion      :1711][INFO    ][7363] Returning information for job: 20191121063703560175
2019-11-21 06:38:44,513 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121063844501712
2019-11-21 06:38:44,525 [salt.minion      :1432][INFO    ][8244] Starting a new job with PID 8244
2019-11-21 06:38:51,111 [salt.state       :915 ][INFO    ][8244] Loading fresh modules for state activity
2019-11-21 06:38:51,173 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'etcd/init.sls'
2019-11-21 06:38:51,220 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/init.sls'
2019-11-21 06:38:51,252 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/server.sls'
2019-11-21 06:38:51,430 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/db/offline_sync.sls'
2019-11-21 06:38:51,548 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/db/plugins/midonet.sls'
2019-11-21 06:38:51,663 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/db/plugins/service/bgpvpn.sls'
2019-11-21 06:38:51,773 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/fwaas.sls'
2019-11-21 06:38:51,907 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/_ssl/mysql.sls'
2019-11-21 06:38:52,035 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/_ssl/rabbitmq.sls'
2019-11-21 06:38:52,937 [keyring.backend  :154 ][INFO    ][8244] Loading Windows (alt)
2019-11-21 06:38:52,941 [keyring.backend  :154 ][INFO    ][8244] Loading pyfs
2019-11-21 06:38:52,942 [keyring.backend  :154 ][INFO    ][8244] Loading multi
2019-11-21 06:38:52,942 [keyring.backend  :154 ][INFO    ][8244] Loading Google
2019-11-21 06:38:52,943 [keyring.backend  :154 ][INFO    ][8244] Loading Gnome
2019-11-21 06:38:52,947 [keyring.backend  :154 ][INFO    ][8244] Loading keyczar
2019-11-21 06:38:52,948 [keyring.backend  :154 ][INFO    ][8244] Loading file
2019-11-21 06:38:52,948 [keyring.backend  :154 ][INFO    ][8244] Loading kwallet
2019-11-21 06:38:53,851 [salt.state       :1780][INFO    ][8244] Running state [neutron-server] at time 06:38:53.851227
2019-11-21 06:38:53,852 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:38:54,334 [salt.state       :1780][INFO    ][8244] Running state [python-neutron-lbaas] at time 06:38:54.334103
2019-11-21 06:38:54,352 [salt.state       :1780][INFO    ][8244] Running state [gettext-base] at time 06:38:54.352074
2019-11-21 06:38:54,361 [salt.state       :1780][INFO    ][8244] Running state [python-pycadf] at time 06:38:54.361513
2019-11-21 06:38:54,371 [salt.state       :1780][INFO    ][8244] Running state [/usr/sbin/policy-rc.d] at time 06:38:54.371202
2019-11-21 06:38:54,371 [salt.state       :1813][INFO    ][8244] Executing state file.managed for [/usr/sbin/policy-rc.d]
2019-11-21 06:38:54,374 [salt.state       :300 ][INFO    ][8244] File changed:
New file
2019-11-21 06:38:54,375 [salt.state       :1951][INFO    ][8244] Completed state [/usr/sbin/policy-rc.d] at time 06:38:54.375083 duration_in_ms=3.881
2019-11-21 06:38:54,375 [salt.state       :1780][INFO    ][8244] Running state [neutron-server] at time 06:38:54.375497
2019-11-21 06:38:54,375 [salt.state       :1813][INFO    ][8244] Executing state pkg.installed for [neutron-server]
2019-11-21 06:38:54,396 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['apt-cache', '-q', 'policy', 'neutron-server'] in directory '/root'
2019-11-21 06:38:54,481 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:38:57,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:38:57,037 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'neutron-server'] in directory '/root'
2019-11-21 06:38:59,575 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063859564759
2019-11-21 06:38:59,590 [salt.minion      :1432][INFO    ][8754] Starting a new job with PID 8754
2019-11-21 06:38:59,609 [salt.minion      :1711][INFO    ][8754] Returning information for job: 20191121063859564759
2019-11-21 06:39:07,460 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:39:07,515 [salt.state       :300 ][INFO    ][8244] Made the following changes:
'libunbound2' changed from 'absent' to '1.5.8-1ubuntu1.1'
'ipset' changed from 'absent' to '6.29-1'
'python-ovsdbapp' changed from 'absent' to '0.12.4-2~u16.04+mcp9'
'python-ryu' changed from 'absent' to '4.32-1~u16.04+mcp'
'python2.7-ryu' changed from 'absent' to '1'
'neutron-plugin-ml2' changed from 'absent' to '2:13.0.5-2~u16.04+mcp121'
'libipset3' changed from 'absent' to '6.29-1'
'python-neutron' changed from 'absent' to '2:13.0.5-2~u16.04+mcp121'
'python-sortedcontainers' changed from 'absent' to '1.4.4-1'
'ipset-6.29' changed from 'absent' to '1'
'python-openvswitch' changed from 'absent' to '2.10.2-2~u16.04+mcp'
'python-tinyrpc' changed from 'absent' to '0.6-1~u16.04+mcp'
'neutron-plugin' changed from 'absent' to '1'
'neutron-common' changed from 'absent' to '2:13.0.5-2~u16.04+mcp121'
'python2.7-neutron' changed from 'absent' to '1'
'neutron-server' changed from 'absent' to '2:13.0.5-2~u16.04+mcp121'
'libopenvswitch' changed from 'absent' to '2.10.2-2~u16.04+mcp'

2019-11-21 06:39:07,547 [salt.state       :915 ][INFO    ][8244] Loading fresh modules for state activity
2019-11-21 06:39:07,590 [salt.state       :1951][INFO    ][8244] Completed state [neutron-server] at time 06:39:07.590693 duration_in_ms=13215.194
2019-11-21 06:39:07,597 [salt.state       :1780][INFO    ][8244] Running state [python-neutron-lbaas] at time 06:39:07.596965
2019-11-21 06:39:07,597 [salt.state       :1813][INFO    ][8244] Executing state pkg.installed for [python-neutron-lbaas]
2019-11-21 06:39:08,539 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:39:08,573 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-neutron-lbaas'] in directory '/root'
2019-11-21 06:39:10,812 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:39:10,861 [salt.state       :300 ][INFO    ][8244] Made the following changes:
'python-neutron-lbaas' changed from 'absent' to '2:13.0.0-2~u16.04+mcp24'

2019-11-21 06:39:10,888 [salt.state       :915 ][INFO    ][8244] Loading fresh modules for state activity
2019-11-21 06:39:10,930 [salt.state       :1951][INFO    ][8244] Completed state [python-neutron-lbaas] at time 06:39:10.930568 duration_in_ms=3333.602
2019-11-21 06:39:10,936 [salt.state       :1780][INFO    ][8244] Running state [gettext-base] at time 06:39:10.936599
2019-11-21 06:39:10,936 [salt.state       :1813][INFO    ][8244] Executing state pkg.installed for [gettext-base]
2019-11-21 06:39:11,678 [salt.state       :300 ][INFO    ][8244] All specified packages are already installed
2019-11-21 06:39:11,678 [salt.state       :1951][INFO    ][8244] Completed state [gettext-base] at time 06:39:11.678749 duration_in_ms=742.149
2019-11-21 06:39:11,679 [salt.state       :1780][INFO    ][8244] Running state [python-pycadf] at time 06:39:11.679281
2019-11-21 06:39:11,679 [salt.state       :1813][INFO    ][8244] Executing state pkg.installed for [python-pycadf]
2019-11-21 06:39:11,689 [salt.state       :300 ][INFO    ][8244] All specified packages are already installed
2019-11-21 06:39:11,689 [salt.state       :1951][INFO    ][8244] Completed state [python-pycadf] at time 06:39:11.689309 duration_in_ms=10.028
2019-11-21 06:39:11,689 [salt.state       :1780][INFO    ][8244] Running state [neutron-plugin-ml2] at time 06:39:11.689548
2019-11-21 06:39:11,689 [salt.state       :1813][INFO    ][8244] Executing state pkg.installed for [neutron-plugin-ml2]
2019-11-21 06:39:11,698 [salt.state       :300 ][INFO    ][8244] All specified packages are already installed
2019-11-21 06:39:11,698 [salt.state       :1951][INFO    ][8244] Completed state [neutron-plugin-ml2] at time 06:39:11.698875 duration_in_ms=9.327
2019-11-21 06:39:11,701 [salt.state       :1780][INFO    ][8244] Running state [/etc/neutron/plugins/ml2/ml2_conf.ini] at time 06:39:11.701058
2019-11-21 06:39:11,701 [salt.state       :1813][INFO    ][8244] Executing state file.managed for [/etc/neutron/plugins/ml2/ml2_conf.ini]
2019-11-21 06:39:11,726 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/ml2_conf.ini'
2019-11-21 06:39:11,914 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/_ml2_conf.vpp.ini'
2019-11-21 06:39:11,933 [salt.state       :300 ][INFO    ][8244] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-
 #
 # From oslo.log
 #
@@ -114,6 +114,7 @@
 #fatal_deprecations = false
 
 
+
 [l2pop]
 
 #
@@ -122,7 +123,7 @@
 
 # Delay within which agent is expected to update existing ports when it
 # restarts (integer value)
-#agent_boot_time = 180
+agent_boot_time = 180
 
 
 [ml2]
@@ -138,28 +139,31 @@
 # Ordered list of network_types to allocate as tenant networks. The default
 # value 'local' is useful for single-box testing but provides no connectivity
 # between hosts. (list value)
-#tenant_network_types = local
+tenant_network_types = geneve,flat
 
 # An ordered list of networking mechanism driver entrypoints to be loaded from
 # the neutron.ml2.mechanism_drivers namespace. (list value)
-#mechanism_drivers =
+mechanism_drivers = ovn
 
 # An ordered list of extension driver entrypoints to be loaded from the
 # neutron.ml2.extension_drivers namespace. For example: extension_drivers =
 # port_security,qos (list value)
 #extension_drivers =
 
+
+extension_drivers = port_security
+
 # Maximum size of an IP packet (MTU) that can traverse the underlying physical
 # network infrastructure without fragmentation when using an overlay/tunnel
 # protocol. This option allows specifying a physical network MTU value that
 # differs from the default global_physnet_mtu value. (integer value)
-#path_mtu = 0
+path_mtu = 9000
 
 # A list of mappings of physical networks to MTU values. The format of the
 # mapping is <physnet>:<mtu val>. This mapping allows specifying a physical
 # network MTU value that differs from the default global_physnet_mtu value.
 # (list value)
-#physical_network_mtus =
+physical_network_mtus = physnet1:9000
 
 # Default network type for external networks when no provider attributes are
 # specified. By default it is None, which means that if provider attributes are
@@ -183,7 +187,7 @@
 # List of physical_network names with which flat networks can be created. Use
 # default '*' to allow flat networks with arbitrary physical_network names. Use
 # an empty list to disable flat networks. (list value)
-#flat_networks = *
+flat_networks = *
 
 
 [ml2_type_geneve]
@@ -194,14 +198,14 @@
 
 # Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
 # Geneve VNI IDs that are available for tenant network allocation (list value)
-#vni_ranges =
+vni_ranges = 1:65536
 
 # Geneve encapsulation header size is dynamic, this value is used to calculate
 # the maximum MTU for the driver. This is the sum of the sizes of the outer ETH
 # + IP + UDP + GENEVE header sizes. The default size for this field is 50,
 # which is the size of the Geneve header without any additional option headers.
 # (integer value)
-#max_header_size = 30
+max_header_size = 38
 
 
 [ml2_type_gre]
@@ -212,7 +216,7 @@
 
 # Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE
 # tunnel IDs that are available for tenant network allocation (list value)
-#tunnel_id_ranges =
+tunnel_id_ranges = 2:65535
 
 
 [ml2_type_vlan]
@@ -225,7 +229,7 @@
 # specifying physical_network names usable for VLAN provider and tenant
 # networks, as well as ranges of VLAN tags on each available for allocation to
 # tenant networks. (list value)
-#network_vlan_ranges =
+network_vlan_ranges = 
 
 
 [ml2_type_vxlan]
@@ -236,12 +240,12 @@
 
 # Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
 # VXLAN VNI IDs that are available for tenant network allocation (list value)
-#vni_ranges =
+vni_ranges = 2:65535
 
 # Multicast group for VXLAN. When configured, will enable sending all broadcast
 # traffic to this multicast group. When left unconfigured, will disable
 # multicast VXLAN mode. (string value)
-#vxlan_group = <None>
+vxlan_group = 224.0.0.1
 
 
 [securitygroup]
@@ -251,17 +255,20 @@
 #
 
 # Driver for security groups firewall in the L2 agent (string value)
-#firewall_driver = <None>
+firewall_driver = openvswitch
 
 # Controls whether the neutron security group API is enabled in the server. It
 # should be false when using no security groups or using the nova security
 # group API. (boolean value)
-#enable_security_group = true
+enable_security_group = True
 
 # Use ipset to speed-up the iptables based security groups. Enabling ipset
 # support requires that ipset is installed on L2 agent node. (boolean value)
 #enable_ipset = true
-
-# Comma-separated list of ethertypes to be permitted, in hexadecimal (starting
-# with "0x"). For example, "0x4008" to permit InfiniBand. (list value)
-#permitted_ethertypes =
+[ovn]
+ovn_nb_connection = tcp:172.16.10.36:6641
+ovn_sb_connection = tcp:172.16.10.36:6642
+ovn_l3_scheduler = leastloaded
+ovn_metadata_enabled = True
+neutron_sync_mode = repair
+enable_distributed_floating_ip = False

2019-11-21 06:39:11,933 [salt.state       :1951][INFO    ][8244] Completed state [/etc/neutron/plugins/ml2/ml2_conf.ini] at time 06:39:11.933333 duration_in_ms=232.276
2019-11-21 06:39:11,935 [salt.state       :1780][INFO    ][8244] Running state [neutron_ssl_mysql] at time 06:39:11.935631
2019-11-21 06:39:11,935 [salt.state       :1813][INFO    ][8244] Executing state test.show_notification for [neutron_ssl_mysql]
2019-11-21 06:39:11,936 [salt.state       :300 ][INFO    ][8244] Running neutron._ssl.mysql
2019-11-21 06:39:11,936 [salt.state       :1951][INFO    ][8244] Completed state [neutron_ssl_mysql] at time 06:39:11.936330 duration_in_ms=0.699
2019-11-21 06:39:11,936 [salt.state       :1780][INFO    ][8244] Running state [neutron_server_ssl_rabbitmq] at time 06:39:11.936705
2019-11-21 06:39:11,936 [salt.state       :1813][INFO    ][8244] Executing state test.show_notification for [neutron_server_ssl_rabbitmq]
2019-11-21 06:39:11,937 [salt.state       :300 ][INFO    ][8244] Running neutron._ssl.rabbitmq
2019-11-21 06:39:11,937 [salt.state       :1951][INFO    ][8244] Completed state [neutron_server_ssl_rabbitmq] at time 06:39:11.937388 duration_in_ms=0.683
2019-11-21 06:39:11,938 [salt.state       :1780][INFO    ][8244] Running state [/etc/neutron/neutron.conf] at time 06:39:11.938018
2019-11-21 06:39:11,938 [salt.state       :1813][INFO    ][8244] Executing state file.managed for [/etc/neutron/neutron.conf]
2019-11-21 06:39:11,954 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/neutron-server.conf'
2019-11-21 06:39:12,185 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/service/_wsgi_default.conf'
2019-11-21 06:39:12,283 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_concurrency.conf'
2019-11-21 06:39:12,342 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/service/_ssl.conf'
2019-11-21 06:39:12,356 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/bgpvpn.conf'
2019-11-21 06:39:12,374 [salt.state       :300 ][INFO    ][8244] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-core_plugin = ml2
 
 #
 # From neutron
@@ -10,28 +10,19 @@
 #state_path = /var/lib/neutron
 
 # The host IP to bind to. (host address value)
-#bind_host = 0.0.0.0
+bind_host = 172.16.10.36
 
 # The port to bind to (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#bind_port = 9696
-
-# The path for API extensions. Note that this can be a colon-separated list of
-# paths. For example: api_extensions_path =
-# extensions:/path/to/more/exts:/even/more/exts. The __path__ of
-# neutron.extensions is appended to this, so if your extensions are in there
-# you don't need to specify them here. (string value)
-#api_extensions_path =
+bind_port = 9696
+# The core plugin Neutron will use (string value)
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+# The service plugins Neutron will use (list value)
+service_plugins = networking_ovn.l3.l3_ovn.OVNL3RouterPlugin,metering,trunk
 
 # The type of authentication to use (string value)
 #auth_strategy = keystone
-
-# The core plugin Neutron will use (string value)
-#core_plugin = <None>
-
-# The service plugins Neutron will use (list value)
-#service_plugins =
 
 # The base MAC address Neutron will use for VIFs. The first 3 octets will
 # remain unchanged. If the 4th octet is not 00, it will also be used. The
@@ -43,7 +34,7 @@
 
 # The maximum number of items returned in a single response, value was
 # 'infinite' or negative integer means no limit (string value)
-#pagination_max_limit = -1
+pagination_max_limit = -1
 
 # Default value of availability zone hints. The availability zone aware
 # schedulers use this when the resources availability_zone_hints is empty.
@@ -69,10 +60,10 @@
 
 # DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
 # lease times. (integer value)
-#dhcp_lease_duration = 86400
+dhcp_lease_duration = 600
 
 # Domain to use for building the hostnames (string value)
-#dns_domain = openstacklocal
+dns_domain = novalocal
 
 # Driver for external DNS integration. (string value)
 #external_dns_driver = <None>
@@ -83,7 +74,7 @@
 # Allow overlapping IP support in Neutron. Attention: the following parameter
 # MUST be set to False if Neutron is being used in conjunction with Nova
 # security groups. (boolean value)
-#allow_overlapping_ips = false
+allow_overlapping_ips = true
 
 # Hostname to be used by the Neutron server, agents and services running on
 # this machine. All the agents and services running on this machine must use
@@ -96,11 +87,11 @@
 #network_link_prefix = <None>
 
 # Send notification to nova when port status changes (boolean value)
-#notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = true
 
 # Send notification to nova when port data (fixed_ips/floatingip) changes so
 # nova can update its cache. (boolean value)
-#notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = true
 
 # Number of seconds between sending events to nova if there are any events to
 # send. (integer value)
@@ -125,7 +116,7 @@
 # neutron automatically subtracts the overlay protocol overhead from this
 # value. Defaults to 1500, the standard value for Ethernet. (integer value)
 # Deprecated group/name - [ml2]/segment_mtu
-#global_physnet_mtu = 1500
+global_physnet_mtu = 9000
 
 # Number of backlog requests to configure the socket with (integer value)
 #backlog = 4096
@@ -145,11 +136,11 @@
 #api_workers = <None>
 
 # Number of RPC worker processes for service. (integer value)
-#rpc_workers = 1
+rpc_workers = 4
 
 # Number of RPC worker processes dedicated to state reports queue. (integer
 # value)
-#rpc_state_report_workers = 1
+rpc_state_report_workers = 4
 
 # Range of seconds to randomly delay when starting the periodic task scheduler
 # to reduce stampeding. (Disable by setting to 0) (integer value)
@@ -179,7 +170,7 @@
 
 # Seconds to regard the agent is down; should be at least twice
 # report_interval, to be sure the agent is down for good. (integer value)
-#agent_down_time = 75
+agent_down_time = 300
 
 # Representing the resource type whose load is being reported by the agent.
 # This can be "networks", "subnets" or "ports". When specified (Default is
@@ -222,7 +213,7 @@
 # greater than 1, the scheduler automatically assigns multiple DHCP agents for
 # a given tenant network, providing high availability for DHCP service.
 # (integer value)
-#dhcp_agents_per_network = 1
+dhcp_agents_per_network = 2
 
 # Enable services on an agent with admin_state_up False. If this option is
 # False, when admin_state_up of an agent is turned False, services on it will
@@ -241,28 +232,28 @@
 
 # System-wide flag to determine the type of router that tenants can create.
 # Only admin can override. (boolean value)
-#router_distributed = false
+router_distributed = False
 
 # Determine if setup is configured for DVR. If False, DVR API extension will be
 # disabled. (boolean value)
-#enable_dvr = true
+enable_dvr = False
 
 # Driver to use for scheduling router to a default L3 agent (string value)
-#router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
 
 # Allow auto scheduling of routers to L3 agent. (boolean value)
 #router_auto_schedule = true
 
 # Automatically reschedule routers from offline L3 agents to online L3 agents.
 # (boolean value)
-#allow_automatic_l3agent_failover = false
+allow_automatic_l3agent_failover = true
 
 # Enable HA mode for virtual routers. (boolean value)
-#l3_ha = false
+l3_ha = False
 
 # Maximum number of L3 agents which a HA router will be scheduled on. If it is
 # set to 0 then the router will be scheduled on every agent. (integer value)
-#max_l3_agents_per_router = 3
+max_l3_agents_per_router = 0
 
 # Subnet used for the l3 HA admin network. (string value)
 #l3_ha_net_cidr = 169.254.192.0/18
@@ -283,7 +274,6 @@
 
 # Maximum number of allowed address pairs (integer value)
 #max_allowed_address_pair = 10
-
 #
 # From oslo.log
 #
@@ -447,6 +437,7 @@
 # exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
+
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
@@ -574,6 +565,7 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -584,8 +576,7 @@
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
-#control_exchange = neutron
-
+#control_exchange = keystone
 #
 # From oslo.service.wsgi
 #
@@ -621,7 +612,6 @@
 
 
 [agent]
-root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf"
 
 #
 # From neutron.agent
@@ -631,7 +621,7 @@
 # /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
 # 'sudo' to skip the filtering and just run the command directly. (string
 # value)
-#root_helper = sudo
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
 
 # Use the root helper when listing the namespaces on a system. This may not be
 # required depending on the security configuration. If the root helper is not
@@ -656,7 +646,7 @@
 # Seconds between nodes reporting state to server; should be less than
 # agent_down_time, best if it is half or less than agent_down_time. (floating
 # point value)
-#report_interval = 30
+report_interval = 30
 
 # Log agent heartbeats (boolean value)
 #log_agent_heartbeats = false
@@ -688,9 +678,8 @@
 
 
 [cors]
-
-#
-# From oslo.middleware.cors
+#
+# From oslo.middleware
 #
 
 # Indicate whether this resource may be shared with the domain received in the
@@ -703,7 +692,7 @@
 
 # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
 # Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
 
 # Maximum cache age of CORS preflight requests. (integer value)
 #max_age = 3600
@@ -713,20 +702,11 @@
 
 # Indicate which header field names may be used during the actual request.
 # (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
 
 
 [database]
-connection = sqlite:////var/lib/neutron/neutron.sqlite
-
-#
-# From neutron.db
-#
-
-# Database engine for which script will be generated when using offline
-# migration. (string value)
-#engine =
-
 #
 # From oslo.db
 #
@@ -744,9 +724,9 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://neutron:opnfv_secret@172.16.10.36/neutron?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
@@ -784,12 +764,14 @@
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 10
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -800,6 +782,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -840,8 +823,8 @@
 #connection_parameters =
 
 
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -856,6 +839,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://172.16.10.36:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -871,6 +855,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://172.16.10.36:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -908,6 +893,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -921,36 +907,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -1028,66 +984,15 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[nova]
-
-#
-# From neutron
-#
 
 # Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # Type of the nova endpoint to use.  This endpoint will be looked up in the
 # keystone catalog and should be one of public, internal or admin. (string
@@ -1097,35 +1002,35 @@
 # admin - <No description provided>
 # internal - <No description provided>
 #endpoint_type = public
-
-#
-# From nova.auth
-#
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://172.16.10.36:35357
 
 # Authentication type to load (string value)
 # Deprecated group/name - [nova]/auth_plugin
 #auth_type = <None>
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# (string value)
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
 #cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
 # value)
 #default_domain_id = <None>
 
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
 # (string value)
 #default_domain_name = <None>
 
@@ -1138,28 +1043,26 @@
 # Verify HTTPS connections. (boolean value)
 #insecure = false
 
-# PEM encoded client certificate key file (string value)
+# Required if identity server requires client certificate (string value)
 #keyfile = <None>
 
 # User's password (string value)
 #password = <None>
+password = opnfv_secret
 
 # Domain ID containing project (string value)
 #project_domain_id = <None>
+project_domain_id = default
 
 # Domain name containing project (string value)
 #project_domain_name = <None>
 
 # Project ID to scope to (string value)
-# Deprecated group/name - [nova]/tenant_id
 #project_id = <None>
 
 # Project name to scope to (string value)
-# Deprecated group/name - [nova]/tenant_name
 #project_name = <None>
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
@@ -1178,347 +1081,190 @@
 
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User id (string value)
+# User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [nova]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
-
-
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
-# a lock path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
+username = neutron
+
+
+[matchmaker_redis]
 
 #
 # From oslo.messaging
 #
 
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# DEPRECATED: Host to locate redis. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
 # Minimum value: 0
 # Maximum value: 65535
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+
+[nova]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:5000
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = nova
+
+
+[oslo_concurrency]
+#
+# From oslo.concurrency
+#
+
+# Enables or disables inter-process locks. (boolean value)
+#disable_process_locking = false
+
+# Directory to use for lock files.  For security, the specified
+# directory should only be writable by the user running the processes
+# that need locking. Defaults to environment variable OSLO_LOCK_PATH.
+# If OSLO_LOCK_PATH is not set in the environment, use the Python
+# tempfile.gettempdir function to find a suitable location. If
+# external locks are used, a lock path must be set. (string value)
+#lock_path = /tmp
+lock_path = /var/lock/neutron
 [oslo_messaging_rabbit]
-
 #
 # From oslo.messaging
 #
@@ -1534,24 +1280,6 @@
 # Connect over SSL. (boolean value)
 # Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
 #ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
@@ -1666,213 +1394,59 @@
 #heartbeat_rate = 2
 
 
-[oslo_messaging_zmq]
-
+
+[oslo_messaging_notifications]
 #
 # From oslo.messaging
 #
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message which failed
+# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
 # (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
+#retry = -1
 
 
 [oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the original
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
 
 # Whether the application is behind a proxy or not. This determines if the
 # middleware should parse the headers or not. (boolean value)
 #enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
+
 
 
 [oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
 
 
 [quotas]
@@ -1927,7 +1501,6 @@
 
 
 [ssl]
-
 #
 # From oslo.service.sslutils
 #
@@ -1952,3 +1525,19 @@
 # Sets the list of available ciphers. value should be a string in the OpenSSL
 # cipher list format. (string value)
 #ciphers = <None>
+
+
+[ovs]
+
+#
+# Advanced services configs
+#
+
+
+
+# BGPVPN config
+
+[service_providers]
+
+
+

2019-11-21 06:39:12,379 [salt.state       :1951][INFO    ][8244] Completed state [/etc/neutron/neutron.conf] at time 06:39:12.379342 duration_in_ms=441.317
2019-11-21 06:39:12,380 [salt.state       :1780][INFO    ][8244] Running state [python-networking-ovn] at time 06:39:12.380321
2019-11-21 06:39:12,381 [salt.state       :1813][INFO    ][8244] Executing state pkg.installed for [python-networking-ovn]
2019-11-21 06:39:12,455 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:39:12,496 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-networking-ovn'] in directory '/root'
2019-11-21 06:39:15,410 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:39:15,472 [salt.state       :300 ][INFO    ][8244] Made the following changes:
'python-networking-ovn' changed from 'absent' to '5.0.1-1~u16.04+mcp148'
'networking-ovn-common' changed from 'absent' to '5.0.1-1~u16.04+mcp148'

2019-11-21 06:39:15,509 [salt.state       :915 ][INFO    ][8244] Loading fresh modules for state activity
2019-11-21 06:39:15,592 [salt.state       :1951][INFO    ][8244] Completed state [python-networking-ovn] at time 06:39:15.592415 duration_in_ms=3212.096
2019-11-21 06:39:15,604 [salt.state       :1780][INFO    ][8244] Running state [ovn-common] at time 06:39:15.604458
2019-11-21 06:39:15,605 [salt.state       :1813][INFO    ][8244] Executing state pkg.installed for [ovn-common]
2019-11-21 06:39:16,468 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:39:16,502 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ovn-common'] in directory '/root'
2019-11-21 06:39:19,471 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:39:19,552 [salt.state       :300 ][INFO    ][8244] Made the following changes:
'ovn-common' changed from 'absent' to '2.10.2-2~u16.04+mcp'
'openvswitch-common' changed from 'absent' to '2.10.2-2~u16.04+mcp'

2019-11-21 06:39:19,581 [salt.state       :915 ][INFO    ][8244] Loading fresh modules for state activity
2019-11-21 06:39:19,622 [salt.state       :1951][INFO    ][8244] Completed state [ovn-common] at time 06:39:19.622587 duration_in_ms=4018.129
2019-11-21 06:39:19,629 [salt.state       :1780][INFO    ][8244] Running state [ovn-central] at time 06:39:19.629188
2019-11-21 06:39:19,629 [salt.state       :1813][INFO    ][8244] Executing state pkg.installed for [ovn-central]
2019-11-21 06:39:20,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:39:20,567 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ovn-central'] in directory '/root'
2019-11-21 06:39:26,088 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:39:26,145 [salt.state       :300 ][INFO    ][8244] Made the following changes:
'ovn-central' changed from 'absent' to '2.10.2-2~u16.04+mcp'
'openvswitch-switch' changed from 'absent' to '2.10.2-2~u16.04+mcp'
'python3-openvswitch' changed from 'absent' to '2.10.2-2~u16.04+mcp'
'python3-sortedcontainers' changed from 'absent' to '1.4.4-1'
'python3-netifaces' changed from 'absent' to '0.10.4-0.1build2'

2019-11-21 06:39:26,173 [salt.state       :915 ][INFO    ][8244] Loading fresh modules for state activity
2019-11-21 06:39:26,214 [salt.state       :1951][INFO    ][8244] Completed state [ovn-central] at time 06:39:26.214344 duration_in_ms=6585.155
2019-11-21 06:39:26,217 [salt.state       :1780][INFO    ][8244] Running state [neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head] at time 06:39:26.217565
2019-11-21 06:39:26,217 [salt.state       :1813][INFO    ][8244] Executing state cmd.run for [neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head]
2019-11-21 06:39:26,221 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command '/bin/true' in directory '/root'
2019-11-21 06:39:26,238 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command 'neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head' in directory '/root'
2019-11-21 06:39:29,796 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121063929780408
2019-11-21 06:39:29,817 [salt.minion      :1432][INFO    ][11483] Starting a new job with PID 11483
2019-11-21 06:39:29,836 [salt.minion      :1711][INFO    ][11483] Returning information for job: 20191121063929780408
2019-11-21 06:39:36,569 [salt.state       :300 ][INFO    ][8244] {'pid': 11429, 'retcode': 0, 'stderr': 'INFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> kilo\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 354db87e3225\nINFO  [alembic.runtime.migration] Running upgrade 354db87e3225 -> 599c6a226151\nINFO  [alembic.runtime.migration] Running upgrade 599c6a226151 -> 52c5312f6baf\nINFO  [alembic.runtime.migration] Running upgrade 52c5312f6baf -> 313373c0ffee\nINFO  [alembic.runtime.migration] Running upgrade 313373c0ffee -> 8675309a5c4f\nINFO  [alembic.runtime.migration] Running upgrade 8675309a5c4f -> 45f955889773\nINFO  [alembic.runtime.migration] Running upgrade 45f955889773 -> 26c371498592\nINFO  [alembic.runtime.migration] Running upgrade 26c371498592 -> 1c844d1677f7\nINFO  [alembic.runtime.migration] Running upgrade 1c844d1677f7 -> 1b4c6e320f79\nINFO  [alembic.runtime.migration] Running upgrade 1b4c6e320f79 -> 48153cb5f051\nINFO  [alembic.runtime.migration] Running upgrade 48153cb5f051 -> 9859ac9c136\nINFO  [alembic.runtime.migration] Running upgrade 9859ac9c136 -> 34af2b5c5a59\nINFO  [alembic.runtime.migration] Running upgrade 34af2b5c5a59 -> 59cb5b6cf4d\nINFO  [alembic.runtime.migration] Running upgrade 59cb5b6cf4d -> 13cfb89f881a\nINFO  [alembic.runtime.migration] Running upgrade 13cfb89f881a -> 32e5974ada25\nINFO  [alembic.runtime.migration] Running upgrade 32e5974ada25 -> ec7fcfbf72ee\nINFO  [alembic.runtime.migration] Running upgrade ec7fcfbf72ee -> dce3ec7a25c9\nINFO  [alembic.runtime.migration] Running upgrade dce3ec7a25c9 -> c3a73f615e4\nINFO  [alembic.runtime.migration] Running upgrade c3a73f615e4 -> 659bf3d90664\nINFO  [alembic.runtime.migration] Running upgrade 659bf3d90664 -> 1df244e556f5\nINFO  [alembic.runtime.migration] Running upgrade 1df244e556f5 -> 19f26505c74f\nINFO  [alembic.runtime.migration] Running upgrade 19f26505c74f -> 15be73214821\nINFO  [alembic.runtime.migration] Running upgrade 15be73214821 -> b4caf27aae4\nINFO  [alembic.runtime.migration] Running upgrade b4caf27aae4 -> 15e43b934f81\nINFO  [alembic.runtime.migration] Running upgrade 15e43b934f81 -> 31ed664953e6\nINFO  [alembic.runtime.migration] Running upgrade 31ed664953e6 -> 2f9e956e7532\nINFO  [alembic.runtime.migration] Running upgrade 2f9e956e7532 -> 3894bccad37f\nINFO  [alembic.runtime.migration] Running upgrade 3894bccad37f -> 0e66c5227a8a\nINFO  [alembic.runtime.migration] Running upgrade 0e66c5227a8a -> 45f8dd33480b\nINFO  [alembic.runtime.migration] Running upgrade 45f8dd33480b -> 5abc0278ca73\nINFO  [alembic.runtime.migration] Running upgrade 5abc0278ca73 -> d3435b514502\nINFO  [alembic.runtime.migration] Running upgrade d3435b514502 -> 30107ab6a3ee\nINFO  [alembic.runtime.migration] Running upgrade 30107ab6a3ee -> c415aab1c048\nINFO  [alembic.runtime.migration] Running upgrade c415aab1c048 -> a963b38d82f4\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 30018084ec99\nINFO  [alembic.runtime.migration] Running upgrade 30018084ec99 -> 4ffceebfada\nINFO  [alembic.runtime.migration] Running upgrade 4ffceebfada -> 5498d17be016\nINFO  [alembic.runtime.migration] Running upgrade 5498d17be016 -> 2a16083502f3\nINFO  [alembic.runtime.migration] Running upgrade 2a16083502f3 -> 2e5352a0ad4d\nINFO  [alembic.runtime.migration] Running upgrade 2e5352a0ad4d -> 11926bcfe72d\nINFO  [alembic.runtime.migration] Running upgrade 11926bcfe72d -> 4af11ca47297\nINFO  [alembic.runtime.migration] Running upgrade 4af11ca47297 -> 1b294093239c\nINFO  [alembic.runtime.migration] Running upgrade 1b294093239c -> 8a6d8bdae39\nINFO  [alembic.runtime.migration] Running upgrade 8a6d8bdae39 -> 2b4c2465d44b\nINFO  [alembic.runtime.migration] Running upgrade 2b4c2465d44b -> e3278ee65050\nINFO  [alembic.runtime.migration] Running upgrade e3278ee65050 -> c6c112992c9\nINFO  [alembic.runtime.migration] Running upgrade c6c112992c9 -> 5ffceebfada\nINFO  [alembic.runtime.migration] Running upgrade 5ffceebfada -> 4ffceebfcdc\nINFO  [alembic.runtime.migration] Running upgrade 4ffceebfcdc -> 7bbb25278f53\nINFO  [alembic.runtime.migration] Running upgrade 7bbb25278f53 -> 89ab9a816d70\nINFO  [alembic.runtime.migration] Running upgrade 89ab9a816d70 -> c879c5e1ee90\nINFO  [alembic.runtime.migration] Running upgrade c879c5e1ee90 -> 8fd3918ef6f4\nINFO  [alembic.runtime.migration] Running upgrade 8fd3918ef6f4 -> 4bcd4df1f426\nINFO  [alembic.runtime.migration] Running upgrade 4bcd4df1f426 -> b67e765a3524\nINFO  [alembic.runtime.migration] Running upgrade a963b38d82f4 -> 3d0e74aa7d37\nINFO  [alembic.runtime.migration] Running upgrade 3d0e74aa7d37 -> 030a959ceafa\nINFO  [alembic.runtime.migration] Running upgrade 030a959ceafa -> a5648cfeeadf\nINFO  [alembic.runtime.migration] Running upgrade a5648cfeeadf -> 0f5bef0f87d4\nINFO  [alembic.runtime.migration] Running upgrade 0f5bef0f87d4 -> 67daae611b6e\nINFO  [alembic.runtime.migration] Running upgrade 67daae611b6e -> 6b461a21bcfc\nINFO  [alembic.runtime.migration] Running upgrade 6b461a21bcfc -> 5cd92597d11d\nINFO  [alembic.runtime.migration] Running upgrade 5cd92597d11d -> 929c968efe70\nINFO  [alembic.runtime.migration] Running upgrade 929c968efe70 -> a9c43481023c\nINFO  [alembic.runtime.migration] Running upgrade a9c43481023c -> 804a3c76314c\nINFO  [alembic.runtime.migration] Running upgrade 804a3c76314c -> 2b42d90729da\nINFO  [alembic.runtime.migration] Running upgrade 2b42d90729da -> 62c781cb6192\nINFO  [alembic.runtime.migration] Running upgrade 62c781cb6192 -> c8c222d42aa9\nINFO  [alembic.runtime.migration] Running upgrade c8c222d42aa9 -> 349b6fd605a6\nINFO  [alembic.runtime.migration] Running upgrade 349b6fd605a6 -> 7d32f979895f\nINFO  [alembic.runtime.migration] Running upgrade 7d32f979895f -> 594422d373ee\nINFO  [alembic.runtime.migration] Running upgrade 594422d373ee -> 61663558142c\nINFO  [alembic.runtime.migration] Running upgrade 61663558142c -> 867d39095bf4, port forwarding\nINFO  [alembic.runtime.migration] Running upgrade b67e765a3524 -> a84ccf28f06a\nINFO  [alembic.runtime.migration] Running upgrade a84ccf28f06a -> 7d9d8eeec6ad\nINFO  [alembic.runtime.migration] Running upgrade 7d9d8eeec6ad -> a8b517cff8ab\nINFO  [alembic.runtime.migration] Running upgrade a8b517cff8ab -> 3b935b28e7a0\nINFO  [alembic.runtime.migration] Running upgrade 3b935b28e7a0 -> b12a3ef66e62\nINFO  [alembic.runtime.migration] Running upgrade b12a3ef66e62 -> 97c25b0d2353\nINFO  [alembic.runtime.migration] Running upgrade 97c25b0d2353 -> 2e0d7a8a1586\nINFO  [alembic.runtime.migration] Running upgrade 2e0d7a8a1586 -> 5c85685d616d\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> initial_branchpoint, initial branchpoint\nINFO  [alembic.runtime.migration] Running upgrade initial_branchpoint -> ac094507b7f4, initial networking-ovn contract branch\nINFO  [alembic.runtime.migration] Running upgrade ac094507b7f4 -> e229b8aad9f2, add ovn_journal and ovn_maintenance tables\nINFO  [alembic.runtime.migration] Running upgrade e229b8aad9f2 -> bc9e24bb9da2, Drop journaling related tables\nINFO  [alembic.runtime.migration] Running upgrade bc9e24bb9da2 -> f48286668608, add_ovn_revision_numbers_table\nINFO  [alembic.runtime.migration] Running upgrade f48286668608 -> 5c198d2723b6, add_ovn_revision_resource_type_as_pk\nINFO  [alembic.runtime.migration] Running upgrade initial_branchpoint -> 1d271ead4eb6, initial networking-ovn contract branch\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> start_neutron_lbaas, start neutron-lbaas chain\nINFO  [alembic.runtime.migration] Running upgrade start_neutron_lbaas -> lbaasv2, lbaas version 2 api\nINFO  [alembic.runtime.migration] Running upgrade lbaasv2 -> 4deef6d81931, add provisioning and operating statuses\nINFO  [alembic.runtime.migration] Running upgrade 4deef6d81931 -> 4b6d8d5310b8, add_index_tenant_id\nINFO  [alembic.runtime.migration] Running upgrade 4b6d8d5310b8 -> 364f9b6064f0, agentv2\nINFO  [alembic.runtime.migration] Running upgrade 364f9b6064f0 -> lbaasv2_tls, lbaasv2 TLS\nINFO  [alembic.runtime.migration] Running upgrade lbaasv2_tls -> 4ba00375f715, edge_driver\nINFO  [alembic.runtime.migration] Running upgrade 4ba00375f715 -> kilo, kilo\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 3345facd0452, Initial Liberty no-op expand script.\nINFO  [alembic.runtime.migration] Running upgrade 3345facd0452 -> 4a408dd491c2, Addition of Name column to lbaas_members and lbaas_healthmonitors table\nINFO  [alembic.runtime.migration] Running upgrade 4a408dd491c2 -> 3426acbc12de, Add flavor id\nINFO  [alembic.runtime.migration] Running upgrade 3426acbc12de -> 6aee0434f911, independent pools\nINFO  [alembic.runtime.migration] Running upgrade 6aee0434f911 -> 3543deab1547, add_l7_tables\nINFO  [alembic.runtime.migration] Running upgrade 3543deab1547 -> 62deca5010cd, Add tenant-id index for L7 tables\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 130ebfdef43, Initial Liberty no-op contract revision.\nINFO  [alembic.runtime.migration] Running upgrade 130ebfdef43 -> 4b4dc6d5d843, rename tenant to project\nINFO  [alembic.runtime.migration] Running upgrade 4b4dc6d5d843 -> e6417a8b114d, Drop v1 tables\nINFO  [alembic.runtime.migration] Running upgrade 62deca5010cd -> 844352f9fe6f, Add healthmonitor max retries down', 'stdout': 'Running upgrade for neutron ...\nOK\nRunning upgrade for networking-ovn ...\nOK\nRunning upgrade for neutron-lbaas ...\nOK'}
2019-11-21 06:39:36,570 [salt.state       :1951][INFO    ][8244] Completed state [neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head] at time 06:39:36.570075 duration_in_ms=10352.51
2019-11-21 06:39:36,570 [salt.state       :1780][INFO    ][8244] Running state [neutron-db-manage --subproject networking-midonet upgrade head] at time 06:39:36.570801
2019-11-21 06:39:36,571 [salt.state       :1813][INFO    ][8244] Executing state cmd.run for [neutron-db-manage --subproject networking-midonet upgrade head]
2019-11-21 06:39:36,571 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command '/bin/false' in directory '/root'
2019-11-21 06:39:36,586 [salt.state       :300 ][INFO    ][8244] onlyif execution failed
2019-11-21 06:39:36,587 [salt.state       :1951][INFO    ][8244] Completed state [neutron-db-manage --subproject networking-midonet upgrade head] at time 06:39:36.587282 duration_in_ms=16.481
2019-11-21 06:39:36,587 [salt.state       :1780][INFO    ][8244] Running state [neutron-db-manage --config-file /etc/neutron/neutron.conf --subproject networking-bgpvpn upgrade head] at time 06:39:36.587931
2019-11-21 06:39:36,588 [salt.state       :1813][INFO    ][8244] Executing state cmd.run for [neutron-db-manage --config-file /etc/neutron/neutron.conf --subproject networking-bgpvpn upgrade head]
2019-11-21 06:39:36,589 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command '/bin/false' in directory '/root'
2019-11-21 06:39:36,600 [salt.state       :300 ][INFO    ][8244] onlyif execution failed
2019-11-21 06:39:36,601 [salt.state       :1951][INFO    ][8244] Completed state [neutron-db-manage --config-file /etc/neutron/neutron.conf --subproject networking-bgpvpn upgrade head] at time 06:39:36.601104 duration_in_ms=13.173
2019-11-21 06:39:36,604 [salt.state       :1780][INFO    ][8244] Running state [/usr/sbin/policy-rc.d] at time 06:39:36.604257
2019-11-21 06:39:36,604 [salt.state       :1813][INFO    ][8244] Executing state file.absent for [/usr/sbin/policy-rc.d]
2019-11-21 06:39:36,609 [salt.state       :300 ][INFO    ][8244] {'removed': '/usr/sbin/policy-rc.d'}
2019-11-21 06:39:36,609 [salt.state       :1951][INFO    ][8244] Completed state [/usr/sbin/policy-rc.d] at time 06:39:36.609675 duration_in_ms=5.417
2019-11-21 06:39:36,610 [salt.state       :1780][INFO    ][8244] Running state [ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini] at time 06:39:36.610423
2019-11-21 06:39:36,610 [salt.state       :1813][INFO    ][8244] Executing state cmd.run for [ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini]
2019-11-21 06:39:36,611 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command 'test -e /etc/neutron/plugin.ini' in directory '/root'
2019-11-21 06:39:36,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command 'ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini' in directory '/root'
2019-11-21 06:39:36,646 [salt.state       :300 ][INFO    ][8244] {'pid': 11525, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:39:36,646 [salt.state       :1951][INFO    ][8244] Completed state [ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini] at time 06:39:36.646923 duration_in_ms=36.5
2019-11-21 06:39:36,647 [salt.state       :1780][INFO    ][8244] Running state [/etc/neutron/api-paste.ini] at time 06:39:36.647645
2019-11-21 06:39:36,648 [salt.state       :1813][INFO    ][8244] Executing state file.managed for [/etc/neutron/api-paste.ini]
2019-11-21 06:39:36,671 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/api-paste.ini'
2019-11-21 06:39:36,783 [salt.state       :300 ][INFO    ][8244] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [composite:neutron]
 use = egg:Paste#urlmap
 /: neutronversions_composite

2019-11-21 06:39:36,784 [salt.state       :1951][INFO    ][8244] Completed state [/etc/neutron/api-paste.ini] at time 06:39:36.784081 duration_in_ms=136.435
2019-11-21 06:39:36,784 [salt.state       :1780][INFO    ][8244] Running state [/etc/default/neutron-server] at time 06:39:36.784568
2019-11-21 06:39:36,784 [salt.state       :1813][INFO    ][8244] Executing state file.managed for [/etc/default/neutron-server]
2019-11-21 06:39:36,802 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/neutron-server'
2019-11-21 06:39:36,902 [salt.state       :300 ][INFO    ][8244] File changed:
--- 
+++ 
@@ -1,5 +1,8 @@
+# Generated by Salt.
+
 # defaults for neutron-server
 
 # path to config file corresponding to the core_plugin specified in
 # neutron.conf
+#NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini"
 NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/ml2/ml2_conf.ini"

2019-11-21 06:39:36,903 [salt.state       :1951][INFO    ][8244] Completed state [/etc/default/neutron-server] at time 06:39:36.903149 duration_in_ms=118.581
2019-11-21 06:39:36,907 [salt.state       :1780][INFO    ][8244] Running state [open_ovs_port] at time 06:39:36.907454
2019-11-21 06:39:36,907 [salt.state       :1813][INFO    ][8244] Executing state iptables.append for [open_ovs_port]
2019-11-21 06:39:37,077 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command '/sbin/iptables --wait -t filter -A INPUT -p tcp --dport 6640 --jump ACCEPT' in directory '/root'
2019-11-21 06:39:37,101 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command '/sbin/iptables-save' in directory '/root'
2019-11-21 06:39:37,115 [salt.state       :300 ][INFO    ][8244] {'locale': 'open_ovs_port'}
2019-11-21 06:39:37,116 [salt.state       :1951][INFO    ][8244] Completed state [open_ovs_port] at time 06:39:37.116544 duration_in_ms=209.089
2019-11-21 06:39:37,748 [salt.state       :1780][INFO    ][8244] Running state [/etc/default/ovn-central] at time 06:39:37.748219
2019-11-21 06:39:37,748 [salt.state       :1813][INFO    ][8244] Executing state file.managed for [/etc/default/ovn-central]
2019-11-21 06:39:37,774 [salt.fileclient  :1219][INFO    ][8244] Fetching file from saltenv 'base', ** done ** 'neutron/files/ovn_central_options'
2019-11-21 06:39:37,888 [salt.state       :300 ][INFO    ][8244] File changed:
--- 
+++ 
@@ -1,5 +1,6 @@
+
 # This is a POSIX shell fragment                -*- sh -*-
 
-# OVN_CTL_OPTS: Extra options to pass to ovs-ctl.  This is, for example,
+# OVN_CTL_OPTS: Extra options to pass to ovn-ctl.  This is, for example,
 # a suitable place to specify --ovn-northd-wrapper=valgrind.
-# OVN_CTL_OPTS=
+OVN_CTL_OPTS='--db-sb-addr=172.16.10.36 --db-sb-create-insecure-remote=yes --db-nb-create-insecure-remote=yes --db-nb-addr=172.16.10.36'

2019-11-21 06:39:37,889 [salt.state       :1951][INFO    ][8244] Completed state [/etc/default/ovn-central] at time 06:39:37.889112 duration_in_ms=140.892
2019-11-21 06:39:37,889 [salt.state       :1780][INFO    ][8244] Running state [openvswitch-switch] at time 06:39:37.889810
2019-11-21 06:39:37,890 [salt.state       :1813][INFO    ][8244] Executing state service.running for [openvswitch-switch]
2019-11-21 06:39:37,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'status', 'openvswitch-switch.service', '-n', '0'] in directory '/root'
2019-11-21 06:39:37,916 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-active', 'openvswitch-switch.service'] in directory '/root'
2019-11-21 06:39:37,932 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-enabled', 'openvswitch-switch.service'] in directory '/root'
2019-11-21 06:39:37,952 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'openvswitch-switch.service'] in directory '/root'
2019-11-21 06:39:38,160 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-active', 'openvswitch-switch.service'] in directory '/root'
2019-11-21 06:39:38,175 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-enabled', 'openvswitch-switch.service'] in directory '/root'
2019-11-21 06:39:38,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-enabled', 'openvswitch-switch.service'] in directory '/root'
2019-11-21 06:39:38,204 [salt.state       :300 ][INFO    ][8244] {'openvswitch-switch': True}
2019-11-21 06:39:38,204 [salt.state       :1951][INFO    ][8244] Completed state [openvswitch-switch] at time 06:39:38.204822 duration_in_ms=315.013
2019-11-21 06:39:38,206 [salt.state       :1780][INFO    ][8244] Running state [ovn-central] at time 06:39:38.206117
2019-11-21 06:39:38,206 [salt.state       :1813][INFO    ][8244] Executing state service.running for [ovn-central]
2019-11-21 06:39:38,208 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'status', 'ovn-central.service', '-n', '0'] in directory '/root'
2019-11-21 06:39:38,224 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-active', 'ovn-central.service'] in directory '/root'
2019-11-21 06:39:38,243 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-enabled', 'ovn-central.service'] in directory '/root'
2019-11-21 06:39:38,267 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'ovn-central.service'] in directory '/root'
2019-11-21 06:39:38,377 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-active', 'ovn-central.service'] in directory '/root'
2019-11-21 06:39:38,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-enabled', 'ovn-central.service'] in directory '/root'
2019-11-21 06:39:38,413 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-enabled', 'ovn-central.service'] in directory '/root'
2019-11-21 06:39:38,430 [salt.state       :300 ][INFO    ][8244] {'ovn-central': True}
2019-11-21 06:39:38,431 [salt.state       :1951][INFO    ][8244] Completed state [ovn-central] at time 06:39:38.431465 duration_in_ms=225.348
2019-11-21 06:39:38,431 [salt.state       :1780][INFO    ][8244] Running state [ovs-appctl -t ovsdb-server ovsdb-server/add-remote ptcp:6640:172.16.10.36] at time 06:39:38.431838
2019-11-21 06:39:38,432 [salt.state       :1813][INFO    ][8244] Executing state cmd.run for [ovs-appctl -t ovsdb-server ovsdb-server/add-remote ptcp:6640:172.16.10.36]
2019-11-21 06:39:38,432 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command 'ovs-appctl -t ovsdb-server ovsdb-server/add-remote ptcp:6640:172.16.10.36' in directory '/root'
2019-11-21 06:39:38,447 [salt.state       :300 ][INFO    ][8244] {'pid': 11841, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:39:38,447 [salt.state       :1951][INFO    ][8244] Completed state [ovs-appctl -t ovsdb-server ovsdb-server/add-remote ptcp:6640:172.16.10.36] at time 06:39:38.447774 duration_in_ms=15.936
2019-11-21 06:39:38,449 [salt.state       :1780][INFO    ][8244] Running state [neutron-server] at time 06:39:38.449350
2019-11-21 06:39:38,449 [salt.state       :1813][INFO    ][8244] Executing state service.running for [neutron-server]
2019-11-21 06:39:38,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'status', 'neutron-server.service', '-n', '0'] in directory '/root'
2019-11-21 06:39:38,464 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-active', 'neutron-server.service'] in directory '/root'
2019-11-21 06:39:38,483 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2019-11-21 06:39:38,503 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'neutron-server.service'] in directory '/root'
2019-11-21 06:39:38,530 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-active', 'neutron-server.service'] in directory '/root'
2019-11-21 06:39:38,548 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2019-11-21 06:39:38,566 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8244] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2019-11-21 06:39:38,581 [salt.state       :300 ][INFO    ][8244] {'neutron-server': True}
2019-11-21 06:39:38,581 [salt.state       :1951][INFO    ][8244] Completed state [neutron-server] at time 06:39:38.581827 duration_in_ms=132.476
2019-11-21 06:39:38,589 [salt.minion      :1711][INFO    ][8244] Returning information for job: 20191121063844501712
2019-11-21 06:42:03,690 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121064203676731
2019-11-21 06:42:03,705 [salt.minion      :1432][INFO    ][12980] Starting a new job with PID 12980
2019-11-21 06:42:10,275 [salt.state       :915 ][INFO    ][12980] Loading fresh modules for state activity
2019-11-21 06:42:10,329 [salt.fileclient  :1219][INFO    ][12980] Fetching file from saltenv 'base', ** done ** 'barbican/init.sls'
2019-11-21 06:42:10,356 [salt.fileclient  :1219][INFO    ][12980] Fetching file from saltenv 'base', ** done ** 'barbican/server.sls'
2019-11-21 06:42:11,034 [salt.fileclient  :1219][INFO    ][12980] Fetching file from saltenv 'base', ** done ** 'barbican/_ssl/mysql.sls'
2019-11-21 06:42:11,097 [salt.fileclient  :1219][INFO    ][12980] Fetching file from saltenv 'base', ** done ** 'barbican/_ssl/rabbitmq.sls'
2019-11-21 06:42:11,162 [salt.fileclient  :1219][INFO    ][12980] Fetching file from saltenv 'base', ** done ** 'barbican/db/offline_sync.sls'
2019-11-21 06:42:12,022 [keyring.backend  :154 ][INFO    ][12980] Loading Windows (alt)
2019-11-21 06:42:12,026 [keyring.backend  :154 ][INFO    ][12980] Loading pyfs
2019-11-21 06:42:12,027 [keyring.backend  :154 ][INFO    ][12980] Loading multi
2019-11-21 06:42:12,027 [keyring.backend  :154 ][INFO    ][12980] Loading Google
2019-11-21 06:42:12,028 [keyring.backend  :154 ][INFO    ][12980] Loading Gnome
2019-11-21 06:42:12,032 [keyring.backend  :154 ][INFO    ][12980] Loading keyczar
2019-11-21 06:42:12,033 [keyring.backend  :154 ][INFO    ][12980] Loading file
2019-11-21 06:42:12,033 [keyring.backend  :154 ][INFO    ][12980] Loading kwallet
2019-11-21 06:42:12,966 [salt.state       :1780][INFO    ][12980] Running state [apache2] at time 06:42:12.966459
2019-11-21 06:42:12,966 [salt.state       :1813][INFO    ][12980] Executing state pkg.installed for [apache2]
2019-11-21 06:42:12,967 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:42:13,375 [salt.state       :300 ][INFO    ][12980] All specified packages are already installed
2019-11-21 06:42:13,375 [salt.state       :1951][INFO    ][12980] Completed state [apache2] at time 06:42:13.375424 duration_in_ms=408.966
2019-11-21 06:42:13,375 [salt.state       :1780][INFO    ][12980] Running state [openssl] at time 06:42:13.375846
2019-11-21 06:42:13,376 [salt.state       :1813][INFO    ][12980] Executing state pkg.installed for [openssl]
2019-11-21 06:42:13,385 [salt.state       :300 ][INFO    ][12980] All specified packages are already installed
2019-11-21 06:42:13,385 [salt.state       :1951][INFO    ][12980] Completed state [openssl] at time 06:42:13.385525 duration_in_ms=9.679
2019-11-21 06:42:13,386 [salt.state       :1780][INFO    ][12980] Running state [a2enmod ssl] at time 06:42:13.386236
2019-11-21 06:42:13,386 [salt.state       :1813][INFO    ][12980] Executing state cmd.run for [a2enmod ssl]
2019-11-21 06:42:13,386 [salt.state       :300 ][INFO    ][12980] /etc/apache2/mods-enabled/ssl.load exists
2019-11-21 06:42:13,387 [salt.state       :1951][INFO    ][12980] Completed state [a2enmod ssl] at time 06:42:13.387063 duration_in_ms=0.826
2019-11-21 06:42:13,387 [salt.state       :1780][INFO    ][12980] Running state [a2enmod rewrite] at time 06:42:13.387607
2019-11-21 06:42:13,387 [salt.state       :1813][INFO    ][12980] Executing state cmd.run for [a2enmod rewrite]
2019-11-21 06:42:13,388 [salt.state       :300 ][INFO    ][12980] /etc/apache2/mods-enabled/rewrite.load exists
2019-11-21 06:42:13,388 [salt.state       :1951][INFO    ][12980] Completed state [a2enmod rewrite] at time 06:42:13.388373 duration_in_ms=0.766
2019-11-21 06:42:13,388 [salt.state       :1780][INFO    ][12980] Running state [libapache2-mod-wsgi] at time 06:42:13.388907
2019-11-21 06:42:13,389 [salt.state       :1813][INFO    ][12980] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-11-21 06:42:13,398 [salt.state       :300 ][INFO    ][12980] All specified packages are already installed
2019-11-21 06:42:13,398 [salt.state       :1951][INFO    ][12980] Completed state [libapache2-mod-wsgi] at time 06:42:13.398387 duration_in_ms=9.48
2019-11-21 06:42:13,398 [salt.state       :1780][INFO    ][12980] Running state [a2enmod wsgi] at time 06:42:13.398951
2019-11-21 06:42:13,399 [salt.state       :1813][INFO    ][12980] Executing state cmd.run for [a2enmod wsgi]
2019-11-21 06:42:13,399 [salt.state       :300 ][INFO    ][12980] /etc/apache2/mods-enabled/wsgi.load exists
2019-11-21 06:42:13,399 [salt.state       :1951][INFO    ][12980] Completed state [a2enmod wsgi] at time 06:42:13.399741 duration_in_ms=0.79
2019-11-21 06:42:13,400 [salt.state       :1780][INFO    ][12980] Running state [a2enmod status -q] at time 06:42:13.400283
2019-11-21 06:42:13,400 [salt.state       :1813][INFO    ][12980] Executing state cmd.run for [a2enmod status -q]
2019-11-21 06:42:13,401 [salt.state       :300 ][INFO    ][12980] /etc/apache2/mods-enabled/status.load exists
2019-11-21 06:42:13,401 [salt.state       :1951][INFO    ][12980] Completed state [a2enmod status -q] at time 06:42:13.401413 duration_in_ms=1.129
2019-11-21 06:42:13,405 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:42:13.405239
2019-11-21 06:42:13,405 [salt.state       :1813][INFO    ][12980] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-11-21 06:42:13,405 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-11-21 06:42:13,406 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:42:13.406074 duration_in_ms=0.835
2019-11-21 06:42:13,406 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:42:13.406308
2019-11-21 06:42:13,406 [salt.state       :1813][INFO    ][12980] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-11-21 06:42:13,406 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-11-21 06:42:13,407 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:42:13.407084 duration_in_ms=0.776
2019-11-21 06:42:13,407 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:42:13.407329
2019-11-21 06:42:13,407 [salt.state       :1813][INFO    ][12980] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-11-21 06:42:13,407 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-11-21 06:42:13,408 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:42:13.408051 duration_in_ms=0.722
2019-11-21 06:42:13,408 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:42:13.408284
2019-11-21 06:42:13,408 [salt.state       :1813][INFO    ][12980] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-11-21 06:42:13,408 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-11-21 06:42:13,409 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:42:13.408983 duration_in_ms=0.7
2019-11-21 06:42:13,411 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 06:42:13.411681
2019-11-21 06:42:13,411 [salt.state       :1813][INFO    ][12980] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-11-21 06:42:13,481 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-11-21 06:42:13,482 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 06:42:13.481957 duration_in_ms=70.276
2019-11-21 06:42:13,483 [salt.state       :1780][INFO    ][12980] Running state [a2enmod mpm_event] at time 06:42:13.483004
2019-11-21 06:42:13,483 [salt.state       :1813][INFO    ][12980] Executing state cmd.run for [a2enmod mpm_event]
2019-11-21 06:42:13,483 [salt.state       :300 ][INFO    ][12980] /etc/apache2/mods-enabled/mpm_event.load exists
2019-11-21 06:42:13,483 [salt.state       :1951][INFO    ][12980] Completed state [a2enmod mpm_event] at time 06:42:13.483791 duration_in_ms=0.787
2019-11-21 06:42:13,484 [salt.state       :1780][INFO    ][12980] Running state [apache_server_service_task] at time 06:42:13.484566
2019-11-21 06:42:13,484 [salt.state       :1813][INFO    ][12980] Executing state test.show_notification for [apache_server_service_task]
2019-11-21 06:42:13,485 [salt.state       :300 ][INFO    ][12980] Running apache.server.service
2019-11-21 06:42:13,485 [salt.state       :1951][INFO    ][12980] Completed state [apache_server_service_task] at time 06:42:13.485279 duration_in_ms=0.713
2019-11-21 06:42:13,485 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/ports.conf] at time 06:42:13.485928
2019-11-21 06:42:13,486 [salt.state       :1813][INFO    ][12980] Executing state file.managed for [/etc/apache2/ports.conf]
2019-11-21 06:42:13,662 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/ports.conf is in the correct state
2019-11-21 06:42:13,662 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/ports.conf] at time 06:42:13.662347 duration_in_ms=176.419
2019-11-21 06:42:13,663 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/conf-available/security.conf] at time 06:42:13.662987
2019-11-21 06:42:13,663 [salt.state       :1813][INFO    ][12980] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-11-21 06:42:13,728 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/conf-available/security.conf is in the correct state
2019-11-21 06:42:13,728 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/conf-available/security.conf] at time 06:42:13.728712 duration_in_ms=65.725
2019-11-21 06:42:13,742 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 06:42:13.742624
2019-11-21 06:42:13,742 [salt.state       :1813][INFO    ][12980] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-11-21 06:42:13,743 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-11-21 06:42:13,743 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 06:42:13.743380 duration_in_ms=0.757
2019-11-21 06:42:13,743 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:42:13.743949
2019-11-21 06:42:13,744 [salt.state       :1813][INFO    ][12980] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-11-21 06:42:14,002 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-11-21 06:42:14,002 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:42:14.002710 duration_in_ms=258.76
2019-11-21 06:42:14,004 [salt.state       :1780][INFO    ][12980] Running state [barbican-api] at time 06:42:14.004395
2019-11-21 06:42:14,004 [salt.state       :1813][INFO    ][12980] Executing state pkg.installed for [barbican-api]
2019-11-21 06:42:14,028 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['apt-cache', '-q', 'policy', 'barbican-api'] in directory '/root'
2019-11-21 06:42:14,105 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:42:16,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:42:16,345 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'barbican-api'] in directory '/root'
2019-11-21 06:42:18,753 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064218742407
2019-11-21 06:42:18,767 [salt.minion      :1432][INFO    ][13941] Starting a new job with PID 13941
2019-11-21 06:42:18,783 [salt.minion      :1711][INFO    ][13941] Returning information for job: 20191121064218742407
2019-11-21 06:42:20,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:42:21,035 [salt.state       :300 ][INFO    ][12980] Made the following changes:
'python-barbican' changed from 'absent' to '1:7.0.0-1~u16.04+mcp33'
'barbican-api' changed from 'absent' to '1:7.0.0-1~u16.04+mcp33'
'barbican-common' changed from 'absent' to '1:7.0.0-1~u16.04+mcp33'

2019-11-21 06:42:21,067 [salt.state       :915 ][INFO    ][12980] Loading fresh modules for state activity
2019-11-21 06:42:21,118 [salt.state       :1951][INFO    ][12980] Completed state [barbican-api] at time 06:42:21.117999 duration_in_ms=7113.602
2019-11-21 06:42:21,128 [salt.state       :1780][INFO    ][12980] Running state [barbican-keystone-listener] at time 06:42:21.128666
2019-11-21 06:42:21,128 [salt.state       :1813][INFO    ][12980] Executing state pkg.installed for [barbican-keystone-listener]
2019-11-21 06:42:22,011 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:42:22,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'barbican-keystone-listener'] in directory '/root'
2019-11-21 06:42:26,038 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:42:26,092 [salt.state       :300 ][INFO    ][12980] Made the following changes:
'barbican-keystone-listener' changed from 'absent' to '1:7.0.0-1~u16.04+mcp33'

2019-11-21 06:42:26,121 [salt.state       :915 ][INFO    ][12980] Loading fresh modules for state activity
2019-11-21 06:42:26,173 [salt.state       :1951][INFO    ][12980] Completed state [barbican-keystone-listener] at time 06:42:26.173405 duration_in_ms=5044.739
2019-11-21 06:42:26,187 [salt.state       :1780][INFO    ][12980] Running state [barbican-worker] at time 06:42:26.187284
2019-11-21 06:42:26,187 [salt.state       :1813][INFO    ][12980] Executing state pkg.installed for [barbican-worker]
2019-11-21 06:42:27,253 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:42:27,283 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'barbican-worker'] in directory '/root'
2019-11-21 06:42:30,840 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:42:30,905 [salt.state       :300 ][INFO    ][12980] Made the following changes:
'barbican-worker' changed from 'absent' to '1:7.0.0-1~u16.04+mcp33'

2019-11-21 06:42:30,934 [salt.state       :915 ][INFO    ][12980] Loading fresh modules for state activity
2019-11-21 06:42:30,976 [salt.state       :1951][INFO    ][12980] Completed state [barbican-worker] at time 06:42:30.976842 duration_in_ms=4789.557
2019-11-21 06:42:30,983 [salt.state       :1780][INFO    ][12980] Running state [python-memcache] at time 06:42:30.982960
2019-11-21 06:42:30,983 [salt.state       :1813][INFO    ][12980] Executing state pkg.installed for [python-memcache]
2019-11-21 06:42:32,265 [salt.state       :300 ][INFO    ][12980] All specified packages are already installed
2019-11-21 06:42:32,266 [salt.state       :1951][INFO    ][12980] Completed state [python-memcache] at time 06:42:32.266001 duration_in_ms=1283.04
2019-11-21 06:42:32,267 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-available/barbican-api.conf] at time 06:42:32.267745
2019-11-21 06:42:32,268 [salt.state       :1813][INFO    ][12980] Executing state file.absent for [/etc/apache2/sites-available/barbican-api.conf]
2019-11-21 06:42:32,268 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/sites-available/barbican-api.conf is not present
2019-11-21 06:42:32,268 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-available/barbican-api.conf] at time 06:42:32.268594 duration_in_ms=0.849
2019-11-21 06:42:32,268 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-enabled/barbican-api.conf] at time 06:42:32.268840
2019-11-21 06:42:32,269 [salt.state       :1813][INFO    ][12980] Executing state file.absent for [/etc/apache2/sites-enabled/barbican-api.conf]
2019-11-21 06:42:32,269 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/sites-enabled/barbican-api.conf is not present
2019-11-21 06:42:32,269 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-enabled/barbican-api.conf] at time 06:42:32.269606 duration_in_ms=0.766
2019-11-21 06:42:32,269 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/conf-enabled/barbican-api.conf] at time 06:42:32.269833
2019-11-21 06:42:32,270 [salt.state       :1813][INFO    ][12980] Executing state file.absent for [/etc/apache2/conf-enabled/barbican-api.conf]
2019-11-21 06:42:32,270 [salt.state       :300 ][INFO    ][12980] {'removed': '/etc/apache2/conf-enabled/barbican-api.conf'}
2019-11-21 06:42:32,270 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/conf-enabled/barbican-api.conf] at time 06:42:32.270593 duration_in_ms=0.759
2019-11-21 06:42:32,271 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:42:32.271503
2019-11-21 06:42:32,271 [salt.state       :1813][INFO    ][12980] Executing state file.exists for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-11-21 06:42:32,272 [salt.state       :300 ][INFO    ][12980] Path /etc/apache2/sites-available/wsgi_barbican_admin.conf exists
2019-11-21 06:42:32,272 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:42:32.272216 duration_in_ms=0.713
2019-11-21 06:42:32,272 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:42:32.272792
2019-11-21 06:42:32,273 [salt.state       :1813][INFO    ][12980] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-11-21 06:42:32,706 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-11-21 06:42:32,707 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:42:32.706969 duration_in_ms=434.176
2019-11-21 06:42:32,707 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:42:32.707591
2019-11-21 06:42:32,707 [salt.state       :1813][INFO    ][12980] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-11-21 06:42:32,709 [salt.state       :300 ][INFO    ][12980] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-11-21 06:42:32,709 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:42:32.709779 duration_in_ms=2.188
2019-11-21 06:42:32,710 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:42:32.710349
2019-11-21 06:42:32,710 [salt.state       :1813][INFO    ][12980] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-11-21 06:42:32,922 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-11-21 06:42:32,923 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:42:32.922968 duration_in_ms=212.618
2019-11-21 06:42:32,923 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:42:32.923589
2019-11-21 06:42:32,923 [salt.state       :1813][INFO    ][12980] Executing state file.managed for [/etc/apache2/sites-available/wsgi_openstack_web.conf]
2019-11-21 06:42:33,156 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/sites-available/wsgi_openstack_web.conf is in the correct state
2019-11-21 06:42:33,156 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:42:33.156334 duration_in_ms=232.744
2019-11-21 06:42:33,157 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:42:33.157014
2019-11-21 06:42:33,157 [salt.state       :1813][INFO    ][12980] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-11-21 06:42:33,367 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-11-21 06:42:33,367 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:42:33.367604 duration_in_ms=210.59
2019-11-21 06:42:33,368 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:42:33.368451
2019-11-21 06:42:33,368 [salt.state       :1813][INFO    ][12980] Executing state file.exists for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-11-21 06:42:33,369 [salt.state       :300 ][INFO    ][12980] Path /etc/apache2/sites-available/wsgi_barbican.conf exists
2019-11-21 06:42:33,369 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:42:33.369229 duration_in_ms=0.778
2019-11-21 06:42:33,370 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:42:33.370199
2019-11-21 06:42:33,370 [salt.state       :1813][INFO    ][12980] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-11-21 06:42:33,588 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-11-21 06:42:33,588 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:42:33.588301 duration_in_ms=218.102
2019-11-21 06:42:33,593 [salt.state       :1780][INFO    ][12980] Running state [apache2] at time 06:42:33.593746
2019-11-21 06:42:33,594 [salt.state       :1813][INFO    ][12980] Executing state service.running for [apache2]
2019-11-21 06:42:33,594 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-11-21 06:42:33,615 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:42:33,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:42:33,654 [salt.state       :300 ][INFO    ][12980] The service apache2 is already running
2019-11-21 06:42:33,655 [salt.state       :1951][INFO    ][12980] Completed state [apache2] at time 06:42:33.655434 duration_in_ms=61.688
2019-11-21 06:42:33,657 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/conf-enabled/security.conf] at time 06:42:33.657332
2019-11-21 06:42:33,657 [salt.state       :1813][INFO    ][12980] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-11-21 06:42:33,661 [salt.state       :300 ][INFO    ][12980] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-11-21 06:42:33,661 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/conf-enabled/security.conf] at time 06:42:33.661436 duration_in_ms=4.105
2019-11-21 06:42:33,661 [salt.state       :1780][INFO    ][12980] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:42:33.661889
2019-11-21 06:42:33,662 [salt.state       :1813][INFO    ][12980] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-11-21 06:42:33,662 [salt.state       :300 ][INFO    ][12980] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-11-21 06:42:33,663 [salt.state       :1951][INFO    ][12980] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:42:33.663181 duration_in_ms=1.291
2019-11-21 06:42:33,665 [salt.state       :1780][INFO    ][12980] Running state [barbican_ssl_mysql] at time 06:42:33.665306
2019-11-21 06:42:33,665 [salt.state       :1813][INFO    ][12980] Executing state test.show_notification for [barbican_ssl_mysql]
2019-11-21 06:42:33,665 [salt.state       :300 ][INFO    ][12980] Running barbican._ssl.mysql
2019-11-21 06:42:33,666 [salt.state       :1951][INFO    ][12980] Completed state [barbican_ssl_mysql] at time 06:42:33.666127 duration_in_ms=0.821
2019-11-21 06:42:33,666 [salt.state       :1780][INFO    ][12980] Running state [barbican_ssl_rabbitmq] at time 06:42:33.666656
2019-11-21 06:42:33,666 [salt.state       :1813][INFO    ][12980] Executing state test.show_notification for [barbican_ssl_rabbitmq]
2019-11-21 06:42:33,667 [salt.state       :300 ][INFO    ][12980] Running barbican._ssl.rabbitmq
2019-11-21 06:42:33,667 [salt.state       :1951][INFO    ][12980] Completed state [barbican_ssl_rabbitmq] at time 06:42:33.667357 duration_in_ms=0.701
2019-11-21 06:42:33,669 [salt.state       :1780][INFO    ][12980] Running state [/etc/barbican/barbican.conf] at time 06:42:33.669888
2019-11-21 06:42:33,670 [salt.state       :1813][INFO    ][12980] Executing state file.managed for [/etc/barbican/barbican.conf]
2019-11-21 06:42:33,688 [salt.fileclient  :1219][INFO    ][12980] Fetching file from saltenv 'base', ** done ** 'barbican/files/rocky/barbican.conf.Debian'
2019-11-21 06:42:33,822 [salt.fileclient  :1219][INFO    ][12980] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/service/_wsgi_default.conf'
2019-11-21 06:42:33,839 [salt.fileclient  :1219][INFO    ][12980] Fetching file from saltenv 'base', ** done ** 'barbican/files/rocky/plugin/_simple_crypto.conf'
2019-11-21 06:42:33,983 [salt.state       :300 ][INFO    ][12980] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -16,9 +18,11 @@
 # Maximum allowed http request size against the barbican-api. (integer
 # value)
 #max_allowed_request_size_in_bytes = 15000
+max_allowed_request_size_in_bytes = 1000000
 
 # Maximum allowed secret size in bytes. (integer value)
 #max_allowed_secret_in_bytes = 10000
+max_allowed_secret_in_bytes = 10000
 
 # Host name, for use in HATEOAS-style references Note: Typically this
 # would be the load balanced endpoint that clients would use to
@@ -27,6 +31,7 @@
 # to override default config value which is 'http://localhost:9311'
 # (string value)
 #host_href = http://localhost:9311
+host_href = http://172.16.10.36:9311
 
 # SQLAlchemy connection string for the reference implementation
 # registry server. Any valid SQLAlchemy connection string is fine.
@@ -35,6 +40,7 @@
 # Note: For absolute addresses, use '////' slashes after 'sqlite:'.
 # (string value)
 #sql_connection = sqlite:///barbican.sqlite
+sql_connection = mysql+pymysql://barbican:opnfv_secret@172.16.10.36/barbican?charset=utf8
 
 # Period in seconds after which SQLAlchemy should reestablish its
 # connection to the database. MySQL uses a default `wait_timeout` of 8
@@ -43,6 +49,7 @@
 # value to ensure that SQLAlchemy reconnects before MySQL can drop the
 # connection. (integer value)
 #sql_idle_timeout = 3600
+sql_idle_timeout = 180
 
 # Maximum number of database connection retries during startup. Set to
 # -1 to specify an infinite retry count. (integer value)
@@ -54,14 +61,17 @@
 
 # Create the Barbican database on service startup. (boolean value)
 #db_auto_create = true
+db_auto_create = False
 
 # Maximum page size for the 'limit' paging URL parameter. (integer
 # value)
 #max_limit_paging = 100
+max_limit_paging = 100
 
 # Default page size for the 'limit' paging URL parameter. (integer
 # value)
 #default_limit_paging = 10
+default_limit_paging = 10
 
 # Accepts a class imported from the sqlalchemy.pool module, and
 # handles the details of building the pool for you. If commented out,
@@ -109,7 +119,6 @@
 # provided then the existence of this option overrides the usage of
 # that option. (string value)
 #backdoor_socket = <None>
-
 #
 # From oslo.log
 #
@@ -128,7 +137,6 @@
 # logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
 # %(default)s . This option is ignored if log_config_append is set.
@@ -226,7 +234,6 @@
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -281,6 +288,7 @@
 # timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
+
 # Expiration timeout in seconds of a name service record about
 # existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
@@ -415,6 +423,7 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other
 # drivers include amqp and zmq. (string value)
@@ -428,49 +437,45 @@
 # option. (string value)
 #control_exchange = openstack
 
+
 #
 # From oslo.service.periodic_task
 #
 
 # Some periodic tasks can be run in a separate process. Should we run
 # them here? (boolean value)
-#run_external_periodic_tasks = true
-
-#
+#run_external_periodic_tasks = true#
 # From oslo.service.wsgi
 #
 
 # File name for the paste.deploy config for api service (string value)
 #api_paste_config = api-paste.ini
 
-# A python format string that is used as the template to generate log
-# lines. The following values can beformatted into it: client_ip,
-# date_time, request_line, status_code, body_length, wall_seconds.
-# (string value)
+# A python format string that is used as the template to generate log lines.
+# The following values can beformatted into it: client_ip, date_time,
+# request_line, status_code, body_length, wall_seconds. (string value)
 #wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s  len: %(body_length)s time: %(wall_seconds).7f
 
-# Sets the value of TCP_KEEPIDLE in seconds for each server socket.
-# Not supported on OS X. (integer value)
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not
+# supported on OS X. (integer value)
 #tcp_keepidle = 600
 
 # Size of the pool of greenthreads used by wsgi (integer value)
 #wsgi_default_pool_size = 100
 
-# Maximum line size of message headers to be accepted. max_header_line
-# may need to be increased when using large tokens (typically those
-# generated when keystone is configured to use PKI tokens with big
-# service catalogs). (integer value)
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated when
+# keystone is configured to use PKI tokens with big service catalogs). (integer
+# value)
 #max_header_line = 16384
 
-# If False, closes the client socket connection explicitly. (boolean
-# value)
+# If False, closes the client socket connection explicitly. (boolean value)
 #wsgi_keep_alive = true
 
-# Timeout for client connections' socket operations. If an incoming
-# connection is idle for this number of seconds it will be closed. A
-# value of '0' means wait forever. (integer value)
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
 #client_socket_timeout = 900
-
 
 [certificate]
 
@@ -500,35 +505,6 @@
 
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain
-# received in the requests "origin" header. Format:
-# "<protocol>://<host>[:<port>]", no trailing slash. Example:
-# https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials
-# (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to
-# HTTP Simple Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Project-Id,X-Identity-Status,X-User-Id,X-Storage-Token,X-Domain-Id,X-User-Domain-Id,X-Project-Domain-Id,X-Roles
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list
-# value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual
-# request. (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Project-Id,X-Identity-Status,X-User-Id,X-Storage-Token,X-Domain-Id,X-User-Domain-Id,X-Project-Domain-Id,X-Roles
-
 
 [crypto]
 
@@ -538,119 +514,94 @@
 
 # Extension namespace to search for plugins. (string value)
 #namespace = barbican.crypto.plugin
+namespace = barbican.crypto.plugin
 
 # List of crypto plugins to load. (multi valued)
 #enabled_crypto_plugins = simple_crypto
 
 
-[dogtag_plugin]
-
-#
-# From barbican.plugin.dogtag
-#
-
-# Path to PEM file for authentication (string value)
-#pem_path = /etc/barbican/kra_admin_cert.pem
-
-# Hostname for the Dogtag instance (string value)
-#dogtag_host = localhost
-
-# Port for the Dogtag instance (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#dogtag_port = 8443
-
-# Path to the NSS certificate database (string value)
-#nss_db_path = /etc/barbican/alias
-
-# Password for the NSS certificate databases (string value)
-#nss_password = <None>
-
-# Profile for simple CMC requests (string value)
-#simple_cmc_profile = caOtherCert
-
-# List of automatically approved enrollment profiles (string value)
-#auto_approved_profiles = caServerCert
-
-# Time in days for CA entries to expire (string value)
-#ca_expiration_time = 1
-
-# Working directory for Dogtag plugin (string value)
-#plugin_working_dir = /etc/barbican/dogtag
+[secretstore:software]
+secret_store_plugin = store_crypto
+crypto_plugin = simple_crypto
+global_default = True
+
+
+
+[simple_crypto_plugin]
+#
+# From barbican.plugin.crypto.simple
+#
+
+# Key encryption key to be used by Simple Crypto Plugin (string value)
+#kek = dGhpcnR5X3R3b19ieXRlX2tleWJsYWhibGFoYmxhaGg=
+kek = 'YWJjZGVmZ2hpamtsbW5vcHFyc3R1dnd4eXoxMjM0NTY='
 
 # User friendly plugin name (string value)
-#plugin_name = Dogtag KRA
-
-# Retries when storing or generating secrets (integer value)
-#retries = 3
+#plugin_name = Software Only Crypto
 
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
 
-# Complete "public" Identity API endpoint. This endpoint should not be
-# an "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to
-# authenticate. Although this endpoint should ideally be unversioned,
-# client support in the wild varies. If you're using a versioned v2
-# endpoint here, then this should *not* be the same endpoint the
-# service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
-
-# DEPRECATED: Complete "public" Identity API endpoint. This endpoint
-# should not be an "admin" endpoint, as it should be accessible by all
-# end users. Unauthenticated clients are redirected to this endpoint
-# to authenticate. Although this endpoint should ideally be
-# unversioned, client support in the wild varies. If you're using a
-# versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because
-# normal end users may not be able to reach that endpoint. This option
-# is deprecated in favor of www_authenticate_uri and will be removed
-# in the S release. (string value)
+www_authenticate_uri = http://172.16.10.36:5000
+
+# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
+# be an "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. This option
+# is deprecated in favor of www_authenticate_uri and will be removed in the S
+# release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of
-# www_authenticate_uri and will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://172.16.10.36:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
 
-# Do not handle authorization requests within the middleware, but
-# delegate the authorization decision to downstream WSGI components.
-# (boolean value)
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
 #delay_auth_decision = false
 
-# Request timeout value for communicating with Identity API server.
-# (integer value)
+# Request timeout value for communicating with Identity API server. (integer
+# value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with
-# Identity API Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
-# auth_token middleware is deployed with a Swift cache, use this
-# option to have the middleware share a caching backend with swift.
-# Otherwise, use the ``memcached_servers`` option instead. (string
-# value)
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
 #cache = <None>
 
-# Required if identity server requires client certificate (string
-# value)
+# Required if identity server requires client certificate (string value)
 #certfile = <None>
 
-# Required if identity server requires client certificate (string
-# value)
+# Required if identity server requires client certificate (string value)
 #keyfile = <None>
 
-# A PEM encoded Certificate Authority to use when verifying HTTPs
-# connections. Defaults to system CAs. (string value)
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
 #cafile = <None>
 
 # Verify HTTPS connections. (boolean value)
@@ -659,137 +610,203 @@
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
 
-# DEPRECATED: Directory used to cache files related to PKI tokens.
-# This option has been deprecated in the Ocata release and will be
-# removed in the P release. (string value)
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #signing_dir = <None>
 
-# Optionally specify a list of memcached server(s) to use for caching.
-# If left undefined, tokens will instead be cached in-process. (list
-# value)
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
 
-# In order to prevent excessive effort spent validating tokens, the
-# middleware caches previously-seen tokens for a configurable duration
-# (in seconds). Set to -1 to disable caching completely. (integer
-# value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked
-# tokens is retrieved from the Identity service (in seconds). A high
-# number of revocation events combined with a low cache duration may
-# significantly reduce performance. Only valid for PKI tokens. This
-# option has been deprecated in the Ocata release and will be removed
-# in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be
-# authenticated or authenticated and encrypted. If MAC, token data is
-# authenticated (with HMAC) in the cache. If ENCRYPT, token data is
-# encrypted and authenticated in the cache. If the value is not one of
-# these options or empty, auth_token will raise an exception on
-# initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This
-# string is used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead
-# before it is tried again. (integer value)
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every
-# memcached server. (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
-# (Optional) Socket timeout in seconds for communicating with a
-# memcached server. (integer value)
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
 #memcache_pool_socket_timeout = 3
 
-# (Optional) Number of seconds a connection to memcached is held
-# unused in the pool before it is closed. (integer value)
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
 #memcache_pool_unused_timeout = 60
 
-# (Optional) Number of seconds that an operation will wait to get a
-# memcached client connection from the pool. (integer value)
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
 #memcache_pool_conn_get_timeout = 10
 
-# (Optional) Use the advanced (eventlet safe) memcached client pool.
-# The advanced pool will only work under python 2.x. (boolean value)
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
 #memcache_use_advanced_pool = false
 
-# (Optional) Indicate whether to set the X-Service-Catalog header. If
-# False, middleware will not ask for service catalog on token
-# validation and will not set the X-Service-Catalog header. (boolean
-# value)
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
 #include_service_catalog = true
 
-# Used to control the use and type of token binding. Can be set to:
-# "disabled" to not check token binding. "permissive" (default) to
-# validate binding information if the bind type is of a form known to
-# the server and ignore it if not. "strict" like "permissive" but if
-# the bind type is unknown the token will be rejected. "required" any
-# form of token binding is needed to be allowed. Finally the name of a
-# binding method that must be present in tokens. (string value)
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
 #enforce_token_bind = permissive
 
-# DEPRECATED: If true, the revocation list will be checked for cached
-# tokens. This requires that PKI tokens are configured on the identity
-# server. (boolean value)
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #check_revocations_for_cached = false
 
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may
-# be a single algorithm or multiple. The algorithms are those
-# supported by Python standard hashlib.new(). The hashes will be tried
-# in the order given, so put the preferred one first for performance.
-# The result of the first hash will be stored in the cache. This will
-# typically be set to multiple values only while migrating from a less
-# secure algorithm to a more secure one. Once all the old tokens are
-# expired this option should be set to a single value for better
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
 # performance. (list value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #hash_algorithms = md5
 
-# A choice of roles that must be present in a service token. Service
-# tokens are allowed to request that an expired token can be used and
-# so this check should tightly control that only actual services
-# should be sending this token. Roles here are applied as an ANY check
-# so any role in this list must be present. For backwards
-# compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens
-# pass that don't pass the service_token_roles check as valid. Setting
-# this true will become the default in a future release and should be
-# enabled if possible. (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
-
-# Config Section from which to load plugin specific options (string
-# value)
+auth_type = password
+
+# Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = barbican
 
 [keystone_notifications]
 
@@ -800,11 +817,12 @@
 # True enables keystone notification listener  functionality. (boolean
 # value)
 #enable = false
+enable = True
 
 # The default exchange under which topics are scoped. May be
 # overridden by an exchange name specified in the transport_url
 # option. (string value)
-#control_exchange = keystone
+#control_exchange = openstack
 
 # Keystone notification queue topic name. This name needs to match one
 # of values mentioned in Keystone deployment's 'notification_topics'
@@ -813,24 +831,14 @@
 # messages will be dispatched to one of the servers in a round-robin
 # fashion. That's why Barbican service should have its own dedicated
 # notification queue so that it receives all of Keystone
-# notifications. Alternatively if the chosen oslo.messaging backend
-# supports listener pooling (for example rabbitmq), setting a non-
-# default 'pool_name' option should be preferred. (string value)
+# notifications. (string value)
 #topic = notifications
-
-# Pool name for notifications listener. Setting this to a distinctive
-# value will allow barbican notifications listener to receive its own
-# copy of all messages from the topic without without interfering with
-# other services listening on the same topic. This feature is
-# supported only by some oslo.messaging backends (in particilar by
-# rabbitmq) and for those it is preferrable to use it instead of
-# separate notification topic for barbican. (string value)
-#pool_name = <None>
 
 # True enables requeue feature in case of notification processing
 # error. Enable this only when underlying transport supports this
 # feature. (boolean value)
 #allow_requeue = false
+allow_requeue = False
 
 # Version of tasks invoked via notifications (string value)
 #version = 1.0
@@ -838,46 +846,6 @@
 # Define the number of max threads to be used for notification server
 # processing functionality. (integer value)
 #thread_pool_size = 10
-
-
-[kmip_plugin]
-
-#
-# From barbican.plugin.secret_store.kmip
-#
-
-# Username for authenticating with KMIP server (string value)
-#username = <None>
-
-# Password for authenticating with KMIP server (string value)
-#password = <None>
-
-# Address of the KMIP server (string value)
-#host = localhost
-
-# Port for the KMIP server (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#port = 5696
-
-# SSL version, maps to the module ssl's constants (string value)
-#ssl_version = PROTOCOL_TLSv1_2
-
-# File path to concatenated "certification authority" certificates
-# (string value)
-#ca_certs = <None>
-
-# File path to local client certificate (string value)
-#certfile = <None>
-
-# File path to local client certificate keyfile (string value)
-#keyfile = <None>
-
-# Only support PKCS#1 encoding of asymmetric keys (boolean value)
-#pkcs1_only = false
-
-# User friendly plugin name (string value)
-#plugin_name = KMIP HSM
 
 
 [matchmaker_redis]
@@ -924,331 +892,7 @@
 
 # Timeout in ms on blocking socket operations. (integer value)
 #socket_timeout = 10000
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a
-# generated UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are
-# given, it will use the system's CA-bundle to verify the server's
-# certificate. (boolean value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate
-# (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication
-# (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate
-# (optional) (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate
-# matches the hostname in the transport_url. In some configurations it
-# may be preferable to use the virtual hostname instead, for example
-# if the server uses the Server Name Indication TLS extension
-# (rfc6066) to provide a certificate per virtual host. Set
-# ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string
-# value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after
-# each unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval +
-# connection_retry_backoff (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due
-# to a recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which
-# failed due to a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used
-# when caller does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used
-# when caller does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link
-# after expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not
-# support routing otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not
-# natively support virtual hosting (such as qpidd). When set to true
-# the virtual host name will be added to all message bus addresses,
-# effectively creating a private 'subnet' per virtual host. Set to
-# False if the message bus supports virtual hosting using the
-# 'hostname' field in the AMQP 1.0 Open performative as the name of
-# the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string
-# value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used
-# by the message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular
-# RPC/Notification server. Used by the message bus to identify
-# messages sent to a single destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers.
-# Used by the message bus to identify messages that should be
-# delivered in a round-robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy
-# (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool
-# (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate
-# message consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds
-# (floating point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer
-# value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate
-# (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If
-# not set, we fall back to the same configuration used for RPC.
-# (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message
-# which failed to be delivered due to a recoverable error. 0 - No
-# retry, -1 - indefinite (integer value)
-#retry = -1
-
-
 [oslo_messaging_rabbit]
-
 #
 # From oslo.messaging
 #
@@ -1261,28 +905,9 @@
 # Auto-delete queues in AMQP. (boolean value)
 #amqp_auto_delete = false
 
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are
-# TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be
-# available on some distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled).
-# (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Enable SSL (boolean value)
+#ssl = <None>
+
 
 # How long to wait before reconnecting in response to an AMQP consumer
 # cancel notification. (floating point value)
@@ -1389,7 +1014,14 @@
 
 # Specifies the number of messages to prefetch. Setting to zero allows
 # unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
 
 # Number of seconds after which the Rabbit broker is considered down
 # if heartbeat's keep-alive fails (0 disable the heartbeat).
@@ -1400,292 +1032,178 @@
 # heartbeat. (integer value)
 #heartbeat_rate = 2
 
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet
-# interface, or IP. The "host" option should point or resolve to this
-# address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
 # Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic.
-# Default is unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address.
-# Must match "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent
-# after closing a socket. The default value of -1 specifies an
-# infinite linger period. The value of 0 specifies no linger period.
-# Pending messages shall be discarded immediately when the socket is
-# closed. Positive values specify an upper bound for the linger
-# period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises
-# timeout exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about
-# existing target ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing
-# target. (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
-# (boolean value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes
-# sense only with use_router_proxy=False which means to use direct
-# connections for direct message types (ignored otherwise). (boolean
-# value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover
-# reasons. This option is actual only in dynamic connections mode.
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
 # (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with
-# ZMQBindError. (integer value)
-#rpc_zmq_bind_port_retries = 100
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Possible values:
 # json - <No description provided>
 # msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means
-# not keeping a queue when server side disconnects. False means to
-# keep queue and messages even if server is disconnected, when the
-# server appears we send all accumulated messages to it. (boolean
-# value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
-# (or any other negative value) means to skip any overrides and leave
-# it to OS default; 0 and 1 (or any other positive value) mean to
-# disable and enable the option respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition.
-# The unit is platform dependent, for example, seconds in Linux,
-# milliseconds in Windows etc. The default value of -1 (or any other
-# negative value and 0) means to skip any overrides and leave it to OS
-# default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring
-# that remote end is not available. The default value of -1 (or any
-# other negative value and 0) means to skip any overrides and leave it
-# to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not
-# received. The unit is platform dependent, for example, seconds in
-# Linux, milliseconds in Windows etc. The default value of -1 (or any
-# other negative value and 0) means to skip any overrides and leave it
-# to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer
-# value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which
-# it is not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism
-# works only via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each
-# retry attempt this timeout is multiplied by some specified
-# multiplier. (integer value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt.
-# (integer value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems
-# occurred: positive value N means at most N retries, 0 means no
-# retries, None or -1 (or any other negative values) mean to retry
-# forever. This option is used only if acknowledgments are enabled.
-# (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option
-# has higher priority then the default publishers list taken from the
-# matchmaker. (list value)
-#subscribe_on =
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
 
 
 [oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
 
 # Whether the application is behind a proxy or not. This determines if
 # the middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
+enable_proxy_headers_parsing = True
 
 [oslo_policy]
 
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is
-# compared to the ``scope_types`` of the policy being enforced. If the
-# scopes do not match, an ``InvalidScope`` exception will be raised.
-# If ``False``, a message will be logged informing operators that
-# policies are being invoked with mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string
-# value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be
-# relative to any directory in the search path defined by the
-# config_dir option, or absolute paths. The file defined by
-# policy_file must exist for these directories to be searched.
-# Missing or empty directories are ignored. (multi valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check
-# (string value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean
-# value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string
-# value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string
-# value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[p11_crypto_plugin]
-
-#
-# From barbican.plugin.crypto.p11
-#
-
-# Path to vendor PKCS11 library (string value)
-#library_path = <None>
-
-# Password to login to PKCS11 session (string value)
-#login = <None>
-
-# Master KEK label (as stored in the HSM) (string value)
-#mkek_label = <None>
-
-# Master KEK length in bytes. (integer value)
-#mkek_length = <None>
-
-# Master HMAC Key label (as stored in the HSM) (string value)
-#hmac_label = <None>
-
-# HSM Slot ID (integer value)
-#slot_id = 1
-
-# Flag for Read/Write Sessions (boolean value)
-#rw_session = true
-
-# Project KEK length in bytes. (integer value)
-#pkek_length = 32
-
-# Project KEK Cache Time To Live, in seconds (integer value)
-#pkek_cache_ttl = 900
-
-# Project KEK Cache Item Limit (integer value)
-#pkek_cache_limit = 100
-
-# Secret encryption mechanism (string value)
-# Deprecated group/name - [p11_crypto_plugin]/algorithm
-#encryption_mechanism = CKM_AES_CBC
-
-# HMAC Key Type (string value)
-#hmac_key_type = CKK_AES
-
-# HMAC Key Generation Algorithm (string value)
-#hmac_keygen_mechanism = CKM_AES_KEY_GEN
-
-# File to pull entropy for seeding RNG (string value)
-#seed_file =
-
-# Amount of data to read from file for seed (integer value)
-#seed_length = 32
-
-# User friendly plugin name (string value)
-#plugin_name = PKCS11 HSM
-
-# Generate IVs for CKM_AES_GCM mechanism. (boolean value)
-# Deprecated group/name - [p11_crypto_plugin]/generate_iv
-#aes_gcm_generate_iv = true
-
-# Always set CKA_SENSITIVE=CK_TRUE including CKA_EXTRACTABLE=CK_TRUE
-# keys. (boolean value)
-#always_set_cka_sensitive = true
-
 
 [queue]
 
@@ -1696,6 +1214,7 @@
 # True enables queuing, False invokes workers synchronously (boolean
 # value)
 #enable = false
+
 
 # Queue namespace (string value)
 #namespace = barbican
@@ -1765,73 +1284,36 @@
 # Flag to enable multiple secret store plugin backend support. Default
 # is False (boolean value)
 #enable_multiple_secret_stores = false
+enable_multiple_secret_stores = True
 
 # List of suffix to use for looking up plugins which are supported
 # with multiple backend support. (list value)
 #stores_lookup_suffix = <None>
-
-
-[simple_crypto_plugin]
-
-#
-# From barbican.plugin.crypto.simple
-#
-
-# Key encryption key to be used by Simple Crypto Plugin (string value)
-#kek = dGhpcnR5X3R3b19ieXRlX2tleWJsYWhibGFoYmxhaGg=
-
-# User friendly plugin name (string value)
-#plugin_name = Software Only Crypto
-
-
-[snakeoil_ca_plugin]
-
-#
-# From barbican.certificate.plugin.snakeoil
-#
-
-# Path to CA certificate file (string value)
-#ca_cert_path = <None>
-
-# Path to CA certificate key file (string value)
-#ca_cert_key_path = <None>
-
-# Path to CA certificate chain file (string value)
-#ca_cert_chain_path = <None>
-
-# Path to CA chain pkcs7 file (string value)
-#ca_cert_pkcs7_path = <None>
-
-# Directory in which to store certs/keys for subcas (string value)
-#subca_cert_key_directory = /etc/barbican/snakeoil-cas
+stores_lookup_suffix = software
 
 
 [ssl]
-
 #
 # From oslo.service.sslutils
 #
 
-# CA certificate file to use to verify connecting clients. (string
-# value)
+# CA certificate file to use to verify connecting clients. (string value)
 # Deprecated group/name - [DEFAULT]/ssl_ca_file
 #ca_file = <None>
 
-# Certificate file to use when starting the server securely. (string
-# value)
+# Certificate file to use when starting the server securely. (string value)
 # Deprecated group/name - [DEFAULT]/ssl_cert_file
 #cert_file = <None>
 
-# Private key file to use when starting the server securely. (string
-# value)
+# Private key file to use when starting the server securely. (string value)
 # Deprecated group/name - [DEFAULT]/ssl_key_file
 #key_file = <None>
 
-# SSL version to use (valid only if SSL enabled). Valid values are
-# TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be
-# available on some distributions. (string value)
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
 #version = <None>
 
-# Sets the list of available ciphers. value should be a string in the
-# OpenSSL cipher list format. (string value)
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
 #ciphers = <None>

2019-11-21 06:42:33,984 [salt.state       :1951][INFO    ][12980] Completed state [/etc/barbican/barbican.conf] at time 06:42:33.984021 duration_in_ms=314.132
2019-11-21 06:42:33,984 [salt.state       :1780][INFO    ][12980] Running state [barbican-db-manage upgrade] at time 06:42:33.984608
2019-11-21 06:42:33,984 [salt.state       :1813][INFO    ][12980] Executing state cmd.run for [barbican-db-manage upgrade]
2019-11-21 06:42:33,985 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command 'barbican-db-manage upgrade' in directory '/root'
2019-11-21 06:42:37,943 [salt.state       :300 ][INFO    ][12980] {'pid': 15046, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:165: Warning: (1831, u"Duplicate index \'ix_preferred_certificate_authorities_project_id\' defined on the table \'barbican.preferred_certificate_authorities\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)\n/usr/lib/python2.7/dist-packages/pymysql/cursors.py:165: Warning: (1831, u"Duplicate index \'ix_project_secret_store_project_id\' defined on the table \'barbican.project_secret_store\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)', 'stdout': "2019-11-21 06:42:35.355 15047 WARNING oslo_db.sqlalchemy.engines [-] MySQL SQL mode is 'ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION', consider enabling TRADITIONAL or STRICT_ALL_TABLES: Empty\x1b[00m\n2019-11-21 06:42:35.358 15047 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\x1b[00m\n2019-11-21 06:42:35.358 15047 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.\x1b[00m\n2019-11-21 06:42:35.392 15047 INFO alembic.runtime.migration [-] Running upgrade  -> 1a0c2cdafb38, create test table\x1b[00m\n2019-11-21 06:42:35.396 15047 INFO alembic.runtime.migration [-] Running upgrade 1a0c2cdafb38 -> juno, juno_initial\x1b[00m\n2019-11-21 06:42:35.651 15047 INFO alembic.runtime.migration [-] Running upgrade juno -> 13d127569afa, create_secret_store_metadata_table\x1b[00m\n2019-11-21 06:42:35.677 15047 INFO alembic.runtime.migration [-] Running upgrade 13d127569afa -> 1e86c18af2dd, add new columns type meta containerId\x1b[00m\n2019-11-21 06:42:35.746 15047 INFO alembic.runtime.migration [-] Running upgrade 1e86c18af2dd -> cd4106a1a0, add-cert-to-container-type\x1b[00m\n2019-11-21 06:42:35.754 15047 INFO alembic.runtime.migration [-] Running upgrade cd4106a1a0 -> 47b69e523451, Made plugin names in kek datum non nullable\x1b[00m\n2019-11-21 06:42:35.761 15047 INFO alembic.runtime.migration [-] Running upgrade 47b69e523451 -> 4070806f6972, Add orders plugin metadata table and relationships\x1b[00m\n2019-11-21 06:42:35.780 15047 INFO alembic.runtime.migration [-] Running upgrade 4070806f6972 -> 2ab3f5371bde, dsa in container type modelbase_to\x1b[00m\n2019-11-21 06:42:35.927 15047 INFO alembic.runtime.migration [-] Running upgrade 2ab3f5371bde -> 2843d6469f25, add sub status info for orders\x1b[00m\n2019-11-21 06:42:35.967 15047 INFO alembic.runtime.migration [-] Running upgrade 2843d6469f25 -> 254495565185, removing redundant fields from order\x1b[00m\n2019-11-21 06:42:36.074 15047 INFO alembic.runtime.migration [-] Running upgrade 254495565185 -> 795737bb3c3, Change tenants to projects\x1b[00m\n2019-11-21 06:42:36.335 15047 INFO alembic.runtime.migration [-] Running upgrade 795737bb3c3 -> 256da65e0c5f, Change keystone_id for external_id in Project model\x1b[00m\n2019-11-21 06:42:36.355 15047 INFO alembic.runtime.migration [-] Running upgrade 256da65e0c5f -> aa2cf96a1d5, Add OrderRetryTask\x1b[00m\n2019-11-21 06:42:36.370 15047 INFO alembic.runtime.migration [-] Running upgrade aa2cf96a1d5 -> 443d6f4a69ac, added secret type column to secrets table\x1b[00m\n2019-11-21 06:42:36.395 15047 INFO alembic.runtime.migration [-] Running upgrade 443d6f4a69ac -> 3d36a26b88af, Add OrderBarbicanMetadata table\x1b[00m\n2019-11-21 06:42:36.413 15047 INFO alembic.runtime.migration [-] Running upgrade 3d36a26b88af -> 2d21598e7e70, Added CA related tables\x1b[00m\n2019-11-21 06:42:36.533 15047 INFO alembic.runtime.migration [-] Running upgrade 2d21598e7e70 -> 1c0f328bfce0, Fixing composite primary keys and adding indexes to foreign key\x1b[00m\n2019-11-21 06:42:36.908 15047 INFO alembic.runtime.migration [-] Running upgrade 1c0f328bfce0 -> 1a7cf79559e3, New secret and container ACL tables\x1b[00m\n2019-11-21 06:42:37.079 15047 INFO alembic.runtime.migration [-] Running upgrade 1a7cf79559e3 -> 3041b53b95d7, Remove size limits on meta table values\x1b[00m\n2019-11-21 06:42:37.136 15047 INFO alembic.runtime.migration [-] Running upgrade 3041b53b95d7 -> 30dba269cc64, Update order_retry_tasks table\x1b[00m\n2019-11-21 06:42:37.260 15047 INFO alembic.runtime.migration [-] Running upgrade 30dba269cc64 -> 6a4457517a3, rename ACL creator_only to project_access\x1b[00m\n2019-11-21 06:42:37.295 15047 INFO alembic.runtime.migration [-] Running upgrade 6a4457517a3 -> 1bc885808c76, Add project id to Secrets\x1b[00m\n2019-11-21 06:42:37.336 15047 INFO alembic.runtime.migration [-] Running upgrade 1bc885808c76 -> 161f8aceb687, fill project_id to secrets where missing\x1b[00m\n2019-11-21 06:42:37.532 15047 INFO alembic.runtime.migration [-] Running upgrade 161f8aceb687 -> 1bece815014f, remove ProjectSecret table\x1b[00m\n2019-11-21 06:42:37.539 15047 INFO alembic.runtime.migration [-] Running upgrade 1bece815014f -> kilo, kilo\x1b[00m\n2019-11-21 06:42:37.542 15047 INFO alembic.runtime.migration [-] Running upgrade kilo -> 46b98cde536, Add project quotas table\x1b[00m\n2019-11-21 06:42:37.580 15047 INFO alembic.runtime.migration [-] Running upgrade 46b98cde536 -> 156cd9933643, Add project column to consumer table\x1b[00m\n2019-11-21 06:42:37.647 15047 INFO alembic.runtime.migration [-] Running upgrade 156cd9933643 -> 3c3b04040bfe, add owning project and creator to CAs\x1b[00m\n2019-11-21 06:42:37.722 15047 INFO alembic.runtime.migration [-] Running upgrade 3c3b04040bfe -> 10220ccbe7fa, Remove transport keys column from project quotas table\x1b[00m\n2019-11-21 06:42:37.742 15047 INFO alembic.runtime.migration [-] Running upgrade 10220ccbe7fa -> 4ecde3a3a72a, Add cas column to project quotas table\x1b[00m\n2019-11-21 06:42:37.765 15047 INFO alembic.runtime.migration [-] Running upgrade 4ecde3a3a72a -> 39a96e67e990, Add missing constraints\x1b[00m\n2019-11-21 06:42:37.783 15047 INFO alembic.runtime.migration [-] Running upgrade 39a96e67e990 -> dce488646127, add-secret-user-metadata\x1b[00m\n2019-11-21 06:42:37.803 15047 INFO alembic.runtime.migration [-] Running upgrade dce488646127 -> d2780d5aa510, change_url_length\x1b[00m\n2019-11-21 06:42:37.811 15047 INFO alembic.runtime.migration [-] Running upgrade d2780d5aa510 -> 39cf2e645cba, Model for multiple backend support\x1b[00m"}
2019-11-21 06:42:37,943 [salt.state       :1951][INFO    ][12980] Completed state [barbican-db-manage upgrade] at time 06:42:37.943887 duration_in_ms=3959.279
2019-11-21 06:42:37,945 [salt.state       :1780][INFO    ][12980] Running state [barbican-manage db sync_secret_stores] at time 06:42:37.945501
2019-11-21 06:42:37,945 [salt.state       :1813][INFO    ][12980] Executing state cmd.run for [barbican-manage db sync_secret_stores]
2019-11-21 06:42:37,946 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command 'barbican-manage db sync_secret_stores' as user 'barbican' in directory '/var/lib/barbican'
2019-11-21 06:42:40,521 [salt.state       :300 ][INFO    ][12980] {'pid': 15090, 'retcode': 0, 'stderr': '', 'stdout': "2019-11-21 06:42:39.154 15098 INFO barbican.model.sync [-] Syncing the secret_stores table with barbican.conf\x1b[00m\n2019-11-21 06:42:39.155 15098 INFO barbican.model.repositories [-] Setting up database engine and session factory\x1b[00m\n2019-11-21 06:42:39.173 15098 WARNING oslo_db.sqlalchemy.engines [-] MySQL SQL mode is 'ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION', consider enabling TRADITIONAL or STRICT_ALL_TABLES: Empty\x1b[00m\n2019-11-21 06:42:39.176 15098 INFO barbican.model.repositories [-] Not auto-creating barbican registry DB\x1b[00m\n2019-11-21 06:42:40.375 15098 INFO barbican.plugin.crypto.simple_crypto [-] Software Only Crypto initialized\x1b[00m"}
2019-11-21 06:42:40,521 [salt.state       :1951][INFO    ][12980] Completed state [barbican-manage db sync_secret_stores] at time 06:42:40.521824 duration_in_ms=2576.323
2019-11-21 06:42:40,523 [salt.state       :1780][INFO    ][12980] Running state [wsgi_barbican] at time 06:42:40.523737
2019-11-21 06:42:40,524 [salt.state       :1813][INFO    ][12980] Executing state apache_site.enabled for [wsgi_barbican]
2019-11-21 06:42:40,524 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['a2ensite', 'wsgi_barbican'] in directory '/root'
2019-11-21 06:42:40,588 [salt.state       :300 ][INFO    ][12980] {'new': 'wsgi_barbican', 'old': None}
2019-11-21 06:42:40,588 [salt.state       :1951][INFO    ][12980] Completed state [wsgi_barbican] at time 06:42:40.588707 duration_in_ms=64.97
2019-11-21 06:42:40,589 [salt.state       :1780][INFO    ][12980] Running state [wsgi_barbican_admin] at time 06:42:40.589822
2019-11-21 06:42:40,590 [salt.state       :1813][INFO    ][12980] Executing state apache_site.enabled for [wsgi_barbican_admin]
2019-11-21 06:42:40,591 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['a2ensite', 'wsgi_barbican_admin'] in directory '/root'
2019-11-21 06:42:40,661 [salt.state       :300 ][INFO    ][12980] {'new': 'wsgi_barbican_admin', 'old': None}
2019-11-21 06:42:40,662 [salt.state       :1951][INFO    ][12980] Completed state [wsgi_barbican_admin] at time 06:42:40.662209 duration_in_ms=72.387
2019-11-21 06:42:40,663 [salt.state       :1780][INFO    ][12980] Running state [apache2] at time 06:42:40.663715
2019-11-21 06:42:40,664 [salt.state       :1813][INFO    ][12980] Executing state service.running for [apache2]
2019-11-21 06:42:40,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:42:40,681 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:42:40,699 [salt.state       :300 ][INFO    ][12980] The service apache2 is already running
2019-11-21 06:42:40,699 [salt.state       :1951][INFO    ][12980] Completed state [apache2] at time 06:42:40.699471 duration_in_ms=35.756
2019-11-21 06:42:40,699 [salt.state       :1780][INFO    ][12980] Running state [apache2] at time 06:42:40.699753
2019-11-21 06:42:40,700 [salt.state       :1813][INFO    ][12980] Executing state service.mod_watch for [apache2]
2019-11-21 06:42:40,700 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:42:40,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-11-21 06:42:48,979 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064248962026
2019-11-21 06:42:48,994 [salt.minion      :1432][INFO    ][15265] Starting a new job with PID 15265
2019-11-21 06:42:49,017 [salt.minion      :1711][INFO    ][15265] Returning information for job: 20191121064248962026
2019-11-21 06:42:51,981 [salt.state       :300 ][INFO    ][12980] {'apache2': True}
2019-11-21 06:42:51,982 [salt.state       :1951][INFO    ][12980] Completed state [apache2] at time 06:42:51.982516 duration_in_ms=11282.761
2019-11-21 06:42:51,984 [salt.state       :1780][INFO    ][12980] Running state [barbican-keystone-listener] at time 06:42:51.984833
2019-11-21 06:42:51,985 [salt.state       :1813][INFO    ][12980] Executing state service.running for [barbican-keystone-listener]
2019-11-21 06:42:51,986 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'status', 'barbican-keystone-listener.service', '-n', '0'] in directory '/root'
2019-11-21 06:42:52,014 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-active', 'barbican-keystone-listener.service'] in directory '/root'
2019-11-21 06:42:52,034 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-enabled', 'barbican-keystone-listener.service'] in directory '/root'
2019-11-21 06:42:52,053 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'barbican-keystone-listener.service'] in directory '/root'
2019-11-21 06:42:52,078 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-active', 'barbican-keystone-listener.service'] in directory '/root'
2019-11-21 06:42:52,099 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-enabled', 'barbican-keystone-listener.service'] in directory '/root'
2019-11-21 06:42:52,115 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-enabled', 'barbican-keystone-listener.service'] in directory '/root'
2019-11-21 06:42:52,135 [salt.state       :300 ][INFO    ][12980] {'barbican-keystone-listener': True}
2019-11-21 06:42:52,136 [salt.state       :1951][INFO    ][12980] Completed state [barbican-keystone-listener] at time 06:42:52.136406 duration_in_ms=151.574
2019-11-21 06:42:52,137 [salt.state       :1780][INFO    ][12980] Running state [barbican-worker] at time 06:42:52.137072
2019-11-21 06:42:52,137 [salt.state       :1813][INFO    ][12980] Executing state service.dead for [barbican-worker]
2019-11-21 06:42:52,138 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'status', 'barbican-worker.service', '-n', '0'] in directory '/root'
2019-11-21 06:42:52,154 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-active', 'barbican-worker.service'] in directory '/root'
2019-11-21 06:42:52,168 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-enabled', 'barbican-worker.service'] in directory '/root'
2019-11-21 06:42:52,185 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'barbican-worker.service'] in directory '/root'
2019-11-21 06:43:02,279 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-active', 'barbican-worker.service'] in directory '/root'
2019-11-21 06:43:02,298 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-enabled', 'barbican-worker.service'] in directory '/root'
2019-11-21 06:43:02,315 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-enabled', 'barbican-worker.service'] in directory '/root'
2019-11-21 06:43:02,342 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'barbican-worker.service'] in directory '/root'
2019-11-21 06:43:02,952 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12980] Executing command ['systemctl', 'is-enabled', 'barbican-worker.service'] in directory '/root'
2019-11-21 06:43:02,983 [salt.state       :300 ][INFO    ][12980] {'barbican-worker': True}
2019-11-21 06:43:02,984 [salt.state       :1951][INFO    ][12980] Completed state [barbican-worker] at time 06:43:02.984114 duration_in_ms=10847.041
2019-11-21 06:43:02,994 [salt.minion      :1711][INFO    ][12980] Returning information for job: 20191121064203676731
2019-11-21 06:43:15,268 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121064315256988
2019-11-21 06:43:15,285 [salt.minion      :1432][INFO    ][15952] Starting a new job with PID 15952
2019-11-21 06:43:16,902 [salt.state       :915 ][INFO    ][15952] Loading fresh modules for state activity
2019-11-21 06:43:16,959 [salt.fileclient  :1219][INFO    ][15952] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2019-11-21 06:43:16,990 [salt.fileclient  :1219][INFO    ][15952] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2019-11-21 06:43:17,015 [salt.fileclient  :1219][INFO    ][15952] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2019-11-21 06:43:17,962 [keyring.backend  :154 ][INFO    ][15952] Loading Windows (alt)
2019-11-21 06:43:17,965 [keyring.backend  :154 ][INFO    ][15952] Loading pyfs
2019-11-21 06:43:17,966 [keyring.backend  :154 ][INFO    ][15952] Loading multi
2019-11-21 06:43:17,967 [keyring.backend  :154 ][INFO    ][15952] Loading Google
2019-11-21 06:43:17,968 [keyring.backend  :154 ][INFO    ][15952] Loading Gnome
2019-11-21 06:43:17,972 [keyring.backend  :154 ][INFO    ][15952] Loading keyczar
2019-11-21 06:43:17,972 [keyring.backend  :154 ][INFO    ][15952] Loading file
2019-11-21 06:43:17,972 [keyring.backend  :154 ][INFO    ][15952] Loading kwallet
2019-11-21 06:43:18,831 [salt.state       :1780][INFO    ][15952] Running state [redis-server] at time 06:43:18.831189
2019-11-21 06:43:18,831 [salt.state       :1813][INFO    ][15952] Executing state pkg.installed for [redis-server]
2019-11-21 06:43:18,832 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:43:19,287 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2019-11-21 06:43:19,376 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:43:21,958 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:43:21,996 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2019-11-21 06:43:26,863 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:43:26,922 [salt.state       :300 ][INFO    ][15952] Made the following changes:
'redis-tools' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.2-bitop' changed from 'absent' to '1'
'lua-cjson' changed from 'absent' to '2.1.0+dfsg-2'
'libhiredis0.14' changed from 'absent' to '0.14.0-2.1~u16.04+mcp1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'
'lua5.1-bitop' changed from 'absent' to '1'
'lua-bitop' changed from 'absent' to '1.0.2-3'
'lua5.2-cjson' changed from 'absent' to '1'
'liblua5.1-bitop0' changed from 'absent' to '1'
'redis-server' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.1-cjson' changed from 'absent' to '1'

2019-11-21 06:43:26,953 [salt.state       :915 ][INFO    ][15952] Loading fresh modules for state activity
2019-11-21 06:43:26,994 [salt.state       :1951][INFO    ][15952] Completed state [redis-server] at time 06:43:26.994251 duration_in_ms=8163.063
2019-11-21 06:43:26,999 [salt.state       :1780][INFO    ][15952] Running state [vm.overcommit_memory] at time 06:43:26.999313
2019-11-21 06:43:26,999 [salt.state       :1813][INFO    ][15952] Executing state sysctl.present for [vm.overcommit_memory]
2019-11-21 06:43:27,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2019-11-21 06:43:27,015 [salt.state       :300 ][INFO    ][15952] {'vm.overcommit_memory': 1}
2019-11-21 06:43:27,015 [salt.state       :1951][INFO    ][15952] Completed state [vm.overcommit_memory] at time 06:43:27.015426 duration_in_ms=16.113
2019-11-21 06:43:27,018 [salt.state       :1780][INFO    ][15952] Running state [/etc/redis/redis.conf] at time 06:43:27.018694
2019-11-21 06:43:27,019 [salt.state       :1813][INFO    ][15952] Executing state file.managed for [/etc/redis/redis.conf]
2019-11-21 06:43:27,052 [salt.fileclient  :1219][INFO    ][15952] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/redis.conf'
2019-11-21 06:43:27,123 [salt.state       :300 ][INFO    ][15952] File changed:
--- 
+++ 
@@ -1,4 +1,3 @@
-# Redis configuration file example.
 #
 # Note that in order to read the configuration file, Redis must be
 # started with the file path as first argument:
@@ -66,7 +65,7 @@
 # IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
 # JUST COMMENT THE FOLLOWING LINE.
 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-bind 127.0.0.1 ::1
+bind 172.16.10.36
 
 # Protected mode is a layer of security protection, in order to avoid that
 # Redis instances left open on the internet are accessed and exploited.
@@ -127,7 +126,7 @@
 #
 # A reasonable value for this option is 300 seconds, which is the new
 # Redis default starting with Redis 3.2.1.
-tcp-keepalive 300
+tcp-keepalive 0
 
 ################################# GENERAL #####################################
 
@@ -144,7 +143,7 @@
 #                        UPSTART_JOB or NOTIFY_SOCKET environment variables
 # Note: these supervision methods only signal "process is ready."
 #       They do not enable continuous liveness pings back to your supervisor.
-supervised no
+supervised auto
 
 # If a pid file is specified, Redis writes it where specified at startup
 # and removes it at exit.
@@ -695,7 +694,6 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
 appendonly no
 
 # The name of the append only file (default: "appendonly.aof")
@@ -725,9 +723,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is
@@ -1375,4 +1371,3 @@
 # Maximum number of set/hash/zset/list fields that will be processed from
 # the main dictionary scan
 # active-defrag-max-scan-fields 1000
-

2019-11-21 06:43:27,124 [salt.state       :1951][INFO    ][15952] Completed state [/etc/redis/redis.conf] at time 06:43:27.124259 duration_in_ms=105.565
2019-11-21 06:43:27,709 [salt.state       :1780][INFO    ][15952] Running state [redis-server] at time 06:43:27.709902
2019-11-21 06:43:27,710 [salt.state       :1813][INFO    ][15952] Executing state service.running for [redis-server]
2019-11-21 06:43:27,711 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2019-11-21 06:43:27,727 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-11-21 06:43:27,740 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-11-21 06:43:27,754 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-server.service'] in directory '/root'
2019-11-21 06:43:27,846 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-11-21 06:43:27,864 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-11-21 06:43:27,884 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15952] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-11-21 06:43:27,899 [salt.state       :300 ][INFO    ][15952] {'redis-server': True}
2019-11-21 06:43:27,899 [salt.state       :1951][INFO    ][15952] Completed state [redis-server] at time 06:43:27.899830 duration_in_ms=189.927
2019-11-21 06:43:27,902 [salt.minion      :1711][INFO    ][15952] Returning information for job: 20191121064315256988
2019-11-21 06:43:28,546 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121064328534264
2019-11-21 06:43:28,561 [salt.minion      :1432][INFO    ][16973] Starting a new job with PID 16973
2019-11-21 06:43:35,076 [salt.state       :915 ][INFO    ][16973] Loading fresh modules for state activity
2019-11-21 06:43:35,133 [salt.fileclient  :1219][INFO    ][16973] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2019-11-21 06:43:35,166 [salt.fileclient  :1219][INFO    ][16973] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2019-11-21 06:43:35,865 [salt.fileclient  :1219][INFO    ][16973] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2019-11-21 06:43:35,921 [salt.fileclient  :1219][INFO    ][16973] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2019-11-21 06:43:35,988 [salt.fileclient  :1219][INFO    ][16973] Fetching file from saltenv 'base', ** done ** 'gnocchi/backend/upgrade.sls'
2019-11-21 06:43:36,855 [keyring.backend  :154 ][INFO    ][16973] Loading Windows (alt)
2019-11-21 06:43:36,858 [keyring.backend  :154 ][INFO    ][16973] Loading pyfs
2019-11-21 06:43:36,859 [keyring.backend  :154 ][INFO    ][16973] Loading multi
2019-11-21 06:43:36,860 [keyring.backend  :154 ][INFO    ][16973] Loading Google
2019-11-21 06:43:36,861 [keyring.backend  :154 ][INFO    ][16973] Loading Gnome
2019-11-21 06:43:36,865 [keyring.backend  :154 ][INFO    ][16973] Loading keyczar
2019-11-21 06:43:36,865 [keyring.backend  :154 ][INFO    ][16973] Loading file
2019-11-21 06:43:36,866 [keyring.backend  :154 ][INFO    ][16973] Loading kwallet
2019-11-21 06:43:37,790 [salt.state       :1780][INFO    ][16973] Running state [apache2] at time 06:43:37.790227
2019-11-21 06:43:37,790 [salt.state       :1813][INFO    ][16973] Executing state pkg.installed for [apache2]
2019-11-21 06:43:37,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:43:38,254 [salt.state       :300 ][INFO    ][16973] All specified packages are already installed
2019-11-21 06:43:38,254 [salt.state       :1951][INFO    ][16973] Completed state [apache2] at time 06:43:38.254834 duration_in_ms=464.607
2019-11-21 06:43:38,255 [salt.state       :1780][INFO    ][16973] Running state [openssl] at time 06:43:38.255195
2019-11-21 06:43:38,255 [salt.state       :1813][INFO    ][16973] Executing state pkg.installed for [openssl]
2019-11-21 06:43:38,264 [salt.state       :300 ][INFO    ][16973] All specified packages are already installed
2019-11-21 06:43:38,264 [salt.state       :1951][INFO    ][16973] Completed state [openssl] at time 06:43:38.264799 duration_in_ms=9.603
2019-11-21 06:43:38,265 [salt.state       :1780][INFO    ][16973] Running state [a2enmod ssl] at time 06:43:38.265456
2019-11-21 06:43:38,265 [salt.state       :1813][INFO    ][16973] Executing state cmd.run for [a2enmod ssl]
2019-11-21 06:43:38,266 [salt.state       :300 ][INFO    ][16973] /etc/apache2/mods-enabled/ssl.load exists
2019-11-21 06:43:38,266 [salt.state       :1951][INFO    ][16973] Completed state [a2enmod ssl] at time 06:43:38.266301 duration_in_ms=0.846
2019-11-21 06:43:38,266 [salt.state       :1780][INFO    ][16973] Running state [a2enmod rewrite] at time 06:43:38.266802
2019-11-21 06:43:38,267 [salt.state       :1813][INFO    ][16973] Executing state cmd.run for [a2enmod rewrite]
2019-11-21 06:43:38,267 [salt.state       :300 ][INFO    ][16973] /etc/apache2/mods-enabled/rewrite.load exists
2019-11-21 06:43:38,267 [salt.state       :1951][INFO    ][16973] Completed state [a2enmod rewrite] at time 06:43:38.267574 duration_in_ms=0.772
2019-11-21 06:43:38,268 [salt.state       :1780][INFO    ][16973] Running state [libapache2-mod-wsgi] at time 06:43:38.268055
2019-11-21 06:43:38,268 [salt.state       :1813][INFO    ][16973] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-11-21 06:43:38,277 [salt.state       :300 ][INFO    ][16973] All specified packages are already installed
2019-11-21 06:43:38,277 [salt.state       :1951][INFO    ][16973] Completed state [libapache2-mod-wsgi] at time 06:43:38.277453 duration_in_ms=9.398
2019-11-21 06:43:38,278 [salt.state       :1780][INFO    ][16973] Running state [a2enmod wsgi] at time 06:43:38.277968
2019-11-21 06:43:38,278 [salt.state       :1813][INFO    ][16973] Executing state cmd.run for [a2enmod wsgi]
2019-11-21 06:43:38,278 [salt.state       :300 ][INFO    ][16973] /etc/apache2/mods-enabled/wsgi.load exists
2019-11-21 06:43:38,278 [salt.state       :1951][INFO    ][16973] Completed state [a2enmod wsgi] at time 06:43:38.278756 duration_in_ms=0.788
2019-11-21 06:43:38,279 [salt.state       :1780][INFO    ][16973] Running state [a2enmod status -q] at time 06:43:38.279316
2019-11-21 06:43:38,279 [salt.state       :1813][INFO    ][16973] Executing state cmd.run for [a2enmod status -q]
2019-11-21 06:43:38,279 [salt.state       :300 ][INFO    ][16973] /etc/apache2/mods-enabled/status.load exists
2019-11-21 06:43:38,280 [salt.state       :1951][INFO    ][16973] Completed state [a2enmod status -q] at time 06:43:38.280094 duration_in_ms=0.779
2019-11-21 06:43:38,283 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:43:38.283877
2019-11-21 06:43:38,284 [salt.state       :1813][INFO    ][16973] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-11-21 06:43:38,284 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-11-21 06:43:38,284 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:43:38.284699 duration_in_ms=0.823
2019-11-21 06:43:38,284 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:43:38.284927
2019-11-21 06:43:38,285 [salt.state       :1813][INFO    ][16973] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-11-21 06:43:38,285 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-11-21 06:43:38,285 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:43:38.285685 duration_in_ms=0.758
2019-11-21 06:43:38,285 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:43:38.285910
2019-11-21 06:43:38,286 [salt.state       :1813][INFO    ][16973] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-11-21 06:43:38,286 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-11-21 06:43:38,286 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:43:38.286632 duration_in_ms=0.722
2019-11-21 06:43:38,286 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:43:38.286851
2019-11-21 06:43:38,287 [salt.state       :1813][INFO    ][16973] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-11-21 06:43:38,287 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-11-21 06:43:38,287 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:43:38.287560 duration_in_ms=0.71
2019-11-21 06:43:38,289 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 06:43:38.289919
2019-11-21 06:43:38,290 [salt.state       :1813][INFO    ][16973] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-11-21 06:43:38,362 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-11-21 06:43:38,362 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 06:43:38.362532 duration_in_ms=72.613
2019-11-21 06:43:38,363 [salt.state       :1780][INFO    ][16973] Running state [a2enmod mpm_event] at time 06:43:38.363433
2019-11-21 06:43:38,363 [salt.state       :1813][INFO    ][16973] Executing state cmd.run for [a2enmod mpm_event]
2019-11-21 06:43:38,364 [salt.state       :300 ][INFO    ][16973] /etc/apache2/mods-enabled/mpm_event.load exists
2019-11-21 06:43:38,364 [salt.state       :1951][INFO    ][16973] Completed state [a2enmod mpm_event] at time 06:43:38.364234 duration_in_ms=0.801
2019-11-21 06:43:38,365 [salt.state       :1780][INFO    ][16973] Running state [apache_server_service_task] at time 06:43:38.365008
2019-11-21 06:43:38,365 [salt.state       :1813][INFO    ][16973] Executing state test.show_notification for [apache_server_service_task]
2019-11-21 06:43:38,365 [salt.state       :300 ][INFO    ][16973] Running apache.server.service
2019-11-21 06:43:38,365 [salt.state       :1951][INFO    ][16973] Completed state [apache_server_service_task] at time 06:43:38.365762 duration_in_ms=0.754
2019-11-21 06:43:38,366 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/ports.conf] at time 06:43:38.366252
2019-11-21 06:43:38,366 [salt.state       :1813][INFO    ][16973] Executing state file.managed for [/etc/apache2/ports.conf]
2019-11-21 06:43:38,531 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/ports.conf is in the correct state
2019-11-21 06:43:38,531 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/ports.conf] at time 06:43:38.531914 duration_in_ms=165.661
2019-11-21 06:43:38,532 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/conf-available/security.conf] at time 06:43:38.532475
2019-11-21 06:43:38,532 [salt.state       :1813][INFO    ][16973] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-11-21 06:43:38,598 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/conf-available/security.conf is in the correct state
2019-11-21 06:43:38,598 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/conf-available/security.conf] at time 06:43:38.598341 duration_in_ms=65.865
2019-11-21 06:43:38,610 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 06:43:38.610342
2019-11-21 06:43:38,610 [salt.state       :1813][INFO    ][16973] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-11-21 06:43:38,610 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-11-21 06:43:38,611 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 06:43:38.611120 duration_in_ms=0.778
2019-11-21 06:43:38,611 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:43:38.611626
2019-11-21 06:43:38,611 [salt.state       :1813][INFO    ][16973] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-11-21 06:43:38,825 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-11-21 06:43:38,825 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:43:38.825927 duration_in_ms=214.3
2019-11-21 06:43:38,826 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:43:38.826452
2019-11-21 06:43:38,826 [salt.state       :1813][INFO    ][16973] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-11-21 06:43:39,139 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-11-21 06:43:39,139 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:43:39.139823 duration_in_ms=313.371
2019-11-21 06:43:39,140 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:43:39.140358
2019-11-21 06:43:39,140 [salt.state       :1813][INFO    ][16973] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-11-21 06:43:39,142 [salt.state       :300 ][INFO    ][16973] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-11-21 06:43:39,142 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:43:39.142539 duration_in_ms=2.181
2019-11-21 06:43:39,143 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:43:39.143044
2019-11-21 06:43:39,143 [salt.state       :1813][INFO    ][16973] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-11-21 06:43:39,378 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-11-21 06:43:39,378 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:43:39.378848 duration_in_ms=235.803
2019-11-21 06:43:39,379 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:43:39.379534
2019-11-21 06:43:39,379 [salt.state       :1813][INFO    ][16973] Executing state file.managed for [/etc/apache2/sites-available/wsgi_openstack_web.conf]
2019-11-21 06:43:39,623 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/sites-available/wsgi_openstack_web.conf is in the correct state
2019-11-21 06:43:39,623 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:43:39.623319 duration_in_ms=243.784
2019-11-21 06:43:39,624 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:43:39.623995
2019-11-21 06:43:39,624 [salt.state       :1813][INFO    ][16973] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-11-21 06:43:39,846 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-11-21 06:43:39,846 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:43:39.846242 duration_in_ms=222.247
2019-11-21 06:43:39,847 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:43:39.847247
2019-11-21 06:43:39,847 [salt.state       :1813][INFO    ][16973] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-11-21 06:43:40,058 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-11-21 06:43:40,058 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:43:40.058674 duration_in_ms=211.426
2019-11-21 06:43:40,062 [salt.state       :1780][INFO    ][16973] Running state [apache2] at time 06:43:40.062466
2019-11-21 06:43:40,062 [salt.state       :1813][INFO    ][16973] Executing state service.running for [apache2]
2019-11-21 06:43:40,063 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-11-21 06:43:40,098 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:43:40,115 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:43:40,134 [salt.state       :300 ][INFO    ][16973] The service apache2 is already running
2019-11-21 06:43:40,135 [salt.state       :1951][INFO    ][16973] Completed state [apache2] at time 06:43:40.135189 duration_in_ms=72.722
2019-11-21 06:43:40,137 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/conf-enabled/security.conf] at time 06:43:40.137148
2019-11-21 06:43:40,137 [salt.state       :1813][INFO    ][16973] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-11-21 06:43:40,141 [salt.state       :300 ][INFO    ][16973] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-11-21 06:43:40,141 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/conf-enabled/security.conf] at time 06:43:40.141775 duration_in_ms=4.628
2019-11-21 06:43:40,142 [salt.state       :1780][INFO    ][16973] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:43:40.142060
2019-11-21 06:43:40,142 [salt.state       :1813][INFO    ][16973] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-11-21 06:43:40,142 [salt.state       :300 ][INFO    ][16973] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-11-21 06:43:40,142 [salt.state       :1951][INFO    ][16973] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:43:40.142898 duration_in_ms=0.838
2019-11-21 06:43:40,143 [salt.state       :1780][INFO    ][16973] Running state [gnocchi-common] at time 06:43:40.143775
2019-11-21 06:43:40,144 [salt.state       :1813][INFO    ][16973] Executing state pkg.installed for [gnocchi-common]
2019-11-21 06:43:40,169 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['apt-cache', '-q', 'policy', 'gnocchi-common'] in directory '/root'
2019-11-21 06:43:40,238 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:43:42,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:43:42,649 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2019-11-21 06:43:43,669 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064343655566
2019-11-21 06:43:43,687 [salt.minion      :1432][INFO    ][17500] Starting a new job with PID 17500
2019-11-21 06:43:43,705 [salt.minion      :1711][INFO    ][17500] Returning information for job: 20191121064343655566
2019-11-21 06:43:52,334 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:43:52,401 [salt.state       :300 ][INFO    ][16973] Made the following changes:
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-snappy' changed from 'absent' to '0.5-1build1'
'python3-dateutil' changed from 'absent' to '2.6.1-1~u16.04+mcp1'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python3-sqlalchemy-ext' changed from 'absent' to '1.2.10+ds1-1~u16.04+mcp'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'python2.7-arrow' changed from 'absent' to '1'
'gnocchi-common' changed from 'absent' to '4.3.2-3~u16.04+mcp11'
'python-ujson' changed from 'absent' to '1.33-1build1'
'python3-editor' changed from 'absent' to '0.4-2'
'libsnappy1v5' changed from 'absent' to '1.1.3-2'
'python3-sqlalchemy' changed from 'absent' to '1.2.10+ds1-1~u16.04+mcp'
'python-gnocchi' changed from 'absent' to '4.3.2-3~u16.04+mcp11'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~u16.04+mcp'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python3-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python3-mako' changed from 'absent' to '1.0.3+ds1-1ubuntu1'

2019-11-21 06:43:52,431 [salt.state       :915 ][INFO    ][16973] Loading fresh modules for state activity
2019-11-21 06:43:52,471 [salt.state       :1951][INFO    ][16973] Completed state [gnocchi-common] at time 06:43:52.471219 duration_in_ms=12327.444
2019-11-21 06:43:52,474 [salt.state       :1780][INFO    ][16973] Running state [gnocchi_ssl_mysql] at time 06:43:52.474155
2019-11-21 06:43:52,474 [salt.state       :1813][INFO    ][16973] Executing state test.show_notification for [gnocchi_ssl_mysql]
2019-11-21 06:43:52,474 [salt.state       :300 ][INFO    ][16973] Running gnocchi._ssl.mysql
2019-11-21 06:43:52,474 [salt.state       :1951][INFO    ][16973] Completed state [gnocchi_ssl_mysql] at time 06:43:52.474941 duration_in_ms=0.786
2019-11-21 06:43:52,476 [salt.state       :1780][INFO    ][16973] Running state [/etc/gnocchi/gnocchi.conf] at time 06:43:52.476933
2019-11-21 06:43:52,477 [salt.state       :1813][INFO    ][16973] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2019-11-21 06:43:52,500 [salt.fileclient  :1219][INFO    ][16973] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.3/gnocchi.conf'
2019-11-21 06:43:52,596 [salt.fileclient  :1219][INFO    ][16973] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.3/storage/_redis.conf'
2019-11-21 06:43:52,687 [salt.state       :300 ][INFO    ][16973] File changed:
--- 
+++ 
@@ -1,14 +1,18 @@
+
+
 [DEFAULT]
 
 #
 # From cotyledon
 #
 
-# Enables or disables logging values of all registered options when starting a service (at DEBUG level). (boolean value)
+# Enables or disables logging values of all registered options when starting a
+# service (at DEBUG level). (boolean value)
 # Note: This option can be changed without restarting.
 #log_options = true
 
-# Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait. (integer value)
+# Specify a timeout after which a gracefully shutdown server will exit. Zero
+# value means endless wait. (integer value)
 # Note: This option can be changed without restarting.
 #graceful_shutdown_timeout = 60
 
@@ -18,21 +22,24 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
 
-# Base directory for log files. If not set, logging will go to stderr. (string value)
+# Base directory for log files. If not set, logging will go to stderr. (string
+# value)
 #log_dir = <None>
 
-# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. (string
-# value)
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. (string value)
 #log_file = <None>
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
 
-# Number of threads to use to parallelize some operations. Default is set to the number of CPU available. (integer value)
+# Number of threads to use to parallelize some operations. Default is set to
+# the number of CPU available. (integer value)
 # Minimum value: 1
 # Deprecated group/name - [storage]/aggregation_workers_number
 #parallel_operations = <None>
@@ -40,13 +47,14 @@
 # Use syslog for logging. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal
-# native protocol which includes structured metadata in addition to log messages. (boolean value)
+# Enable journald for logging. If running in a systemd environment you may wish
+# to enable journal support. Doing so will use the journal native protocol
+# which includes structured metadata in addition to log messages. (boolean
+# value)
 #use_journal = false
 
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
-
 
 [api]
 
@@ -63,11 +71,14 @@
 # keystone - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
-
-# The maximum number of items returned in a single response from a collection resource (integer value)
+auth_mode = keystone
+
+# The maximum number of items returned in a single response from a collection
+# resource (integer value)
 #max_limit = 1000
 
-# Number of seconds before timeout when attempting to do some operations. (integer value)
+# Number of seconds before timeout when attempting to do some operations.
+# (integer value)
 # Minimum value: 0
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
@@ -92,7 +103,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -102,354 +112,75 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the requests "origin" header. Format:
-# "<protocol>://<host>[:<port>]", no trailing slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request. (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[database]
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database. (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL
-# mode is set by the server configuration, set this to no value. Example: mysql_sql_mode= (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB). (boolean value)
-#mysql_enable_ndb = false
-
-# Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next
-# time they are checked out from the pool. (integer value)
-# Deprecated group/name - [DATABASE]/idle_timeout
-# Deprecated group/name - [database]/idle_timeout
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by sqlalchemy.
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost. (boolean value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.
-# (integer value)
-#db_max_retries = 20
-
-# Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application is running on a port. Expects a "port:path" list of strings.
-# Used by DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
+driver = redis
+
+redis_url = redis://172.16.10.36:6379
+
+[indexer]
 
 #
 # From gnocchi
 #
 
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# if > 0, this create a subdirectory for every N bytesof the metric uuid (integer value)
-# Minimum value: 0
-# Maximum value: 32
-#file_subdir_len = ${storage.file_subdir_len}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis client
-#   internals so that it works as you expect/want it to):  `db`, `encoding`, `retry_on_timeout`, `sentinel`, `sentinel_fallback`,
-# `socket_keepalive`, `socket_timeout`, `ssl`, `ssl_certfile`, `ssl_keyfile`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0 to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
-
-[indexer]
-
-#
-# From gnocchi
-#
-
 # Indexer driver to use (string value)
-url = sqlite:////var/lib/gnocchi/gnocchidb
-
-
+#url = <None>
+url = mysql+pymysql://gnocchi:opnfv_secret@172.16.10.36/gnocchi?charset=utf8
 [keystone_authtoken]
 
 #
 # From keystonemiddleware.auth_token
 #
 
-# Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client
-# support in the wild varies. If you're using a versioned v2 endpoint here, then this should *not* be the same endpoint the service user
-# utilizes for validating tokens, because normal end users may not be able to reach that endpoint. (string value)
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
-
-# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all
-# end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned,
-# client support in the wild varies. If you're using a versioned v2 endpoint here, then this should *not* be the same endpoint the service
-# user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor
-# of www_authenticate_uri and will be removed in the S release. (string value)
+www_authenticate_uri = http://172.16.10.36:5000
+
+# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
+# be an "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. This option
+# is deprecated in favor of www_authenticate_uri and will be removed in the S
+# release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://172.16.10.36:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
 
-# Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.
-# (boolean value)
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
 #delay_auth_decision = false
 
-# Request timeout value for communicating with Identity API server. (integer value)
+# Request timeout value for communicating with Identity API server. (integer
+# value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with Identity API Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
-# Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option
-# to have the middleware share a caching backend with swift. Otherwise, use the ``memcached_servers`` option instead. (string value)
+# Request environment key where the Swift cache object is stored. When
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
 #cache = <None>
 
 # Required if identity server requires client certificate (string value)
@@ -458,7 +189,8 @@
 # Required if identity server requires client certificate (string value)
 #keyfile = <None>
 
-# A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs. (string value)
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
 #cafile = <None>
 
 # Verify HTTPS connections. (boolean value)
@@ -466,184 +198,247 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
-
-# DEPRECATED: Directory used to cache files related to PKI tokens. This option has been deprecated in the Ocata release and will be removed
-# in the P release. (string value)
+region_name = RegionOne
+
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #signing_dir = <None>
 
-# Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process. (list
-# value)
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in
-# seconds). Set to -1 to disable caching completely. (integer value)
+memcached_servers=172.16.10.36:11211
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
 #token_cache_time = 300
 
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is retrieved from the Identity service (in seconds). A high
-# number of revocation events combined with a low cache duration may significantly reduce performance. Only valid for PKI tokens. This
-# option has been deprecated in the Ocata release and will be removed in the P release. (integer value)
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #revocation_cache_time = 10
 
-# (Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is
-# authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of
-# these options or empty, auth_token will raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead before it is tried again. (integer value)
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every memcached server. (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
-# (Optional) Socket timeout in seconds for communicating with a memcached server. (integer value)
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
 #memcache_pool_socket_timeout = 3
 
-# (Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed. (integer value)
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
 #memcache_pool_unused_timeout = 60
 
-# (Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool. (integer value)
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
 #memcache_pool_conn_get_timeout = 10
 
-# (Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x. (boolean value)
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
 #memcache_use_advanced_pool = false
 
-# (Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation
-# and will not set the X-Service-Catalog header. (boolean value)
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
 #include_service_catalog = true
 
-# Used to control the use and type of token binding. Can be set to: "disabled" to not check token binding. "permissive" (default) to
-# validate binding information if the bind type is of a form known to the server and ignore it if not. "strict" like "permissive" but if the
-# bind type is unknown the token will be rejected. "required" any form of token binding is needed to be allowed. Finally the name of a
-# binding method that must be present in tokens. (string value)
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
 #enforce_token_bind = permissive
 
-# DEPRECATED: If true, the revocation list will be checked for cached tokens. This requires that PKI tokens are configured on the identity
-# server. (boolean value)
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #check_revocations_for_cached = false
 
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those supported
-# by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one first for performance. The result
-# of the first hash will be stored in the cache. This will typically be set to multiple values only while migrating from a less secure
-# algorithm to a more secure one. Once all the old tokens are expired this option should be set to a single value for better performance.
-# (list value)
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #hash_algorithms = md5
 
-# A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so
-# this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any
-# role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check. (list value)
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens pass that don't pass the service_token_roles check as valid. Setting
-# this true will become the default in a future release and should be enabled if possible. (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
-
-#
-# From gnocchi
-#
-
-# Number of workers for Gnocchi metric daemons. By default the available number of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1 to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker utilization but may also increase load on coordination backend.
-# Value is capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
 
 [oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the middleware should parse the headers or not. (boolean value)
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the original
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if the
+# middleware should parse the headers or not. (boolean value)
 #enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
 
 
 [oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating policies. If ``True``, the scope of the token used in the request is
-# compared to the ``scope_types`` of the policy being enforced. If the scopes do not match, an ``InvalidScope`` exception will be raised. If
-# ``False``, a message will be logged informing operators that policies are being invoked with mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the
-# config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched.  Missing or empty
-# directories are ignored. (multi valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
 
 [statsd]
 
@@ -673,148 +468,91 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# if > 0, this create a subdirectory for every N bytesof the metric uuid (integer value)
-# Minimum value: 0
-# Maximum value: 32
-#file_subdir_len = 2
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis client
-#   internals so that it works as you expect/want it to):  `db`, `encoding`, `retry_on_timeout`, `sentinel`, `sentinel_fallback`,
-# `socket_keepalive`, `socket_timeout`, `ssl`, `ssl_certfile`, `ssl_keyfile`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0 to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://172.16.10.36:6379
+
+file_basepath = /var/lib/gnocchi
+[cache]
+#
+# From oslo.cache
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Cache backend module. For eventlet-based or environments with hundreds of
+# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
+# recommended. For environments with less than 100 threaded servers, Memcached
+# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
+# environments with a single instance of the server can use the
+# dogpile.cache.memory backend. (string value)
+# Possible values:
+# oslo_cache.memcache_pool - <No description provided>
+# oslo_cache.dict - <No description provided>
+# oslo_cache.mongo - <No description provided>
+# oslo_cache.etcd3gw - <No description provided>
+# dogpile.cache.memcached - <No description provided>
+# dogpile.cache.pylibmc - <No description provided>
+# dogpile.cache.bmemcached - <No description provided>
+# dogpile.cache.dbm - <No description provided>
+# dogpile.cache.redis - <No description provided>
+# dogpile.cache.memory - <No description provided>
+# dogpile.cache.memory_pickle - <No description provided>
+# dogpile.cache.null - <No description provided>
+#backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+memcache_servers =172.16.10.36:11211
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry = 300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (floating point value)
+#memcache_socket_timeout = 3.0
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
+

2019-11-21 06:43:52,688 [salt.state       :1951][INFO    ][16973] Completed state [/etc/gnocchi/gnocchi.conf] at time 06:43:52.688542 duration_in_ms=211.609
2019-11-21 06:43:52,693 [salt.state       :1780][INFO    ][16973] Running state [gnocchi-api] at time 06:43:52.693669
2019-11-21 06:43:52,693 [salt.state       :1813][INFO    ][16973] Executing state pkg.installed for [gnocchi-api]
2019-11-21 06:43:53,497 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:43:53,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2019-11-21 06:43:58,375 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:43:58,435 [salt.state       :300 ][INFO    ][16973] Made the following changes:
'gnocchi-api' changed from 'absent' to '4.3.2-3~u16.04+mcp11'
'uwsgi-core' changed from 'absent' to '2.0.12-5ubuntu3.2'
'libjansson4' changed from 'absent' to '2.7-3ubuntu0.1'
'uwsgi-plugin-python' changed from 'absent' to '2.0.12-5ubuntu3.2'
'libmatheval1' changed from 'absent' to '1.1.11+dfsg-2'

2019-11-21 06:43:58,465 [salt.state       :915 ][INFO    ][16973] Loading fresh modules for state activity
2019-11-21 06:43:58,508 [salt.state       :1951][INFO    ][16973] Completed state [gnocchi-api] at time 06:43:58.508526 duration_in_ms=5814.856
2019-11-21 06:43:58,516 [salt.state       :1780][INFO    ][16973] Running state [gnocchi-metricd] at time 06:43:58.516080
2019-11-21 06:43:58,516 [salt.state       :1813][INFO    ][16973] Executing state pkg.installed for [gnocchi-metricd]
2019-11-21 06:43:59,377 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:43:59,411 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2019-11-21 06:44:03,128 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:44:03,188 [salt.state       :300 ][INFO    ][16973] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.3.2-3~u16.04+mcp11'

2019-11-21 06:44:03,216 [salt.state       :915 ][INFO    ][16973] Loading fresh modules for state activity
2019-11-21 06:44:03,260 [salt.state       :1951][INFO    ][16973] Completed state [gnocchi-metricd] at time 06:44:03.260343 duration_in_ms=4744.262
2019-11-21 06:44:03,263 [salt.state       :1780][INFO    ][16973] Running state [gnocchi-upgrade] at time 06:44:03.263466
2019-11-21 06:44:03,263 [salt.state       :1813][INFO    ][16973] Executing state cmd.run for [gnocchi-upgrade]
2019-11-21 06:44:03,267 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2019-11-21 06:44:06,305 [salt.state       :300 ][INFO    ][16973] {'pid': 19090, 'retcode': 0, 'stderr': '2019-11-21 06:44:05,696 [19096] INFO     gnocchi.service: Gnocchi version 4.3.2\n2019-11-21 06:44:06,053 [19096] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://***:***@172.16.10.36/gnocchi?charset=utf8\n2019-11-21 06:44:06,195 [19096] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=172.16.10.36,port=6379,db=0>>>\n2019-11-21 06:44:06,197 [19096] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=172.16.10.36,port=6379,db=0>>>', 'stdout': ''}
2019-11-21 06:44:06,305 [salt.state       :1951][INFO    ][16973] Completed state [gnocchi-upgrade] at time 06:44:06.305623 duration_in_ms=3042.156
2019-11-21 06:44:06,312 [salt.state       :1780][INFO    ][16973] Running state [wsgi_gnocchi] at time 06:44:06.312780
2019-11-21 06:44:06,313 [salt.state       :1813][INFO    ][16973] Executing state apache_site.enabled for [wsgi_gnocchi]
2019-11-21 06:44:06,313 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2019-11-21 06:44:06,394 [salt.state       :300 ][INFO    ][16973] {'new': 'wsgi_gnocchi', 'old': None}
2019-11-21 06:44:06,395 [salt.state       :1951][INFO    ][16973] Completed state [wsgi_gnocchi] at time 06:44:06.395346 duration_in_ms=82.565
2019-11-21 06:44:07,098 [salt.state       :1780][INFO    ][16973] Running state [apache2] at time 06:44:07.098475
2019-11-21 06:44:07,098 [salt.state       :1813][INFO    ][16973] Executing state service.running for [apache2]
2019-11-21 06:44:07,099 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:44:07,115 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:44:07,134 [salt.state       :300 ][INFO    ][16973] The service apache2 is already running
2019-11-21 06:44:07,134 [salt.state       :1951][INFO    ][16973] Completed state [apache2] at time 06:44:07.134488 duration_in_ms=36.014
2019-11-21 06:44:07,134 [salt.state       :1780][INFO    ][16973] Running state [apache2] at time 06:44:07.134763
2019-11-21 06:44:07,135 [salt.state       :1813][INFO    ][16973] Executing state service.mod_watch for [apache2]
2019-11-21 06:44:07,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:44:07,150 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-11-21 06:44:09,421 [salt.state       :300 ][INFO    ][16973] {'apache2': True}
2019-11-21 06:44:09,422 [salt.state       :1951][INFO    ][16973] Completed state [apache2] at time 06:44:09.422061 duration_in_ms=2287.297
2019-11-21 06:44:09,424 [salt.state       :1780][INFO    ][16973] Running state [gnocchi-metricd] at time 06:44:09.424741
2019-11-21 06:44:09,425 [salt.state       :1813][INFO    ][16973] Executing state service.running for [gnocchi-metricd]
2019-11-21 06:44:09,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2019-11-21 06:44:09,448 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2019-11-21 06:44:09,469 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-11-21 06:44:09,506 [salt.state       :300 ][INFO    ][16973] The service gnocchi-metricd is already running
2019-11-21 06:44:09,507 [salt.state       :1951][INFO    ][16973] Completed state [gnocchi-metricd] at time 06:44:09.507506 duration_in_ms=82.765
2019-11-21 06:44:09,508 [salt.state       :1780][INFO    ][16973] Running state [gnocchi-metricd] at time 06:44:09.507946
2019-11-21 06:44:09,508 [salt.state       :1813][INFO    ][16973] Executing state service.mod_watch for [gnocchi-metricd]
2019-11-21 06:44:09,509 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2019-11-21 06:44:09,528 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16973] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'gnocchi-metricd.service'] in directory '/root'
2019-11-21 06:44:13,710 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064413695676
2019-11-21 06:44:13,723 [salt.minion      :1432][INFO    ][19622] Starting a new job with PID 19622
2019-11-21 06:44:13,744 [salt.minion      :1711][INFO    ][19622] Returning information for job: 20191121064413695676
2019-11-21 06:44:24,691 [salt.state       :300 ][INFO    ][16973] {'gnocchi-metricd': True}
2019-11-21 06:44:24,691 [salt.state       :1951][INFO    ][16973] Completed state [gnocchi-metricd] at time 06:44:24.691425 duration_in_ms=15183.479
2019-11-21 06:44:24,704 [salt.minion      :1711][INFO    ][16973] Returning information for job: 20191121064328534264
2019-11-21 06:44:25,278 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121064425266969
2019-11-21 06:44:25,296 [salt.minion      :1432][INFO    ][19706] Starting a new job with PID 19706
2019-11-21 06:44:31,853 [salt.state       :915 ][INFO    ][19706] Loading fresh modules for state activity
2019-11-21 06:44:31,911 [salt.fileclient  :1219][INFO    ][19706] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2019-11-21 06:44:31,943 [salt.fileclient  :1219][INFO    ][19706] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2019-11-21 06:44:32,630 [salt.fileclient  :1219][INFO    ][19706] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2019-11-21 06:44:32,681 [salt.fileclient  :1219][INFO    ][19706] Fetching file from saltenv 'base', ** done ** 'panko/db/offline_sync.sls'
2019-11-21 06:44:33,580 [keyring.backend  :154 ][INFO    ][19706] Loading Windows (alt)
2019-11-21 06:44:33,584 [keyring.backend  :154 ][INFO    ][19706] Loading pyfs
2019-11-21 06:44:33,585 [keyring.backend  :154 ][INFO    ][19706] Loading multi
2019-11-21 06:44:33,585 [keyring.backend  :154 ][INFO    ][19706] Loading Google
2019-11-21 06:44:33,587 [keyring.backend  :154 ][INFO    ][19706] Loading Gnome
2019-11-21 06:44:33,591 [keyring.backend  :154 ][INFO    ][19706] Loading keyczar
2019-11-21 06:44:33,591 [keyring.backend  :154 ][INFO    ][19706] Loading file
2019-11-21 06:44:33,592 [keyring.backend  :154 ][INFO    ][19706] Loading kwallet
2019-11-21 06:44:34,498 [salt.state       :1780][INFO    ][19706] Running state [apache2] at time 06:44:34.498364
2019-11-21 06:44:34,499 [salt.state       :1813][INFO    ][19706] Executing state pkg.installed for [apache2]
2019-11-21 06:44:34,500 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:44:34,903 [salt.state       :300 ][INFO    ][19706] All specified packages are already installed
2019-11-21 06:44:34,904 [salt.state       :1951][INFO    ][19706] Completed state [apache2] at time 06:44:34.903943 duration_in_ms=405.58
2019-11-21 06:44:34,904 [salt.state       :1780][INFO    ][19706] Running state [openssl] at time 06:44:34.904567
2019-11-21 06:44:34,905 [salt.state       :1813][INFO    ][19706] Executing state pkg.installed for [openssl]
2019-11-21 06:44:34,914 [salt.state       :300 ][INFO    ][19706] All specified packages are already installed
2019-11-21 06:44:34,915 [salt.state       :1951][INFO    ][19706] Completed state [openssl] at time 06:44:34.915122 duration_in_ms=10.554
2019-11-21 06:44:34,915 [salt.state       :1780][INFO    ][19706] Running state [a2enmod ssl] at time 06:44:34.915948
2019-11-21 06:44:34,916 [salt.state       :1813][INFO    ][19706] Executing state cmd.run for [a2enmod ssl]
2019-11-21 06:44:34,917 [salt.state       :300 ][INFO    ][19706] /etc/apache2/mods-enabled/ssl.load exists
2019-11-21 06:44:34,917 [salt.state       :1951][INFO    ][19706] Completed state [a2enmod ssl] at time 06:44:34.917496 duration_in_ms=1.548
2019-11-21 06:44:34,918 [salt.state       :1780][INFO    ][19706] Running state [a2enmod rewrite] at time 06:44:34.918208
2019-11-21 06:44:34,918 [salt.state       :1813][INFO    ][19706] Executing state cmd.run for [a2enmod rewrite]
2019-11-21 06:44:34,919 [salt.state       :300 ][INFO    ][19706] /etc/apache2/mods-enabled/rewrite.load exists
2019-11-21 06:44:34,919 [salt.state       :1951][INFO    ][19706] Completed state [a2enmod rewrite] at time 06:44:34.919664 duration_in_ms=1.455
2019-11-21 06:44:34,920 [salt.state       :1780][INFO    ][19706] Running state [libapache2-mod-wsgi] at time 06:44:34.920367
2019-11-21 06:44:34,920 [salt.state       :1813][INFO    ][19706] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-11-21 06:44:34,930 [salt.state       :300 ][INFO    ][19706] All specified packages are already installed
2019-11-21 06:44:34,930 [salt.state       :1951][INFO    ][19706] Completed state [libapache2-mod-wsgi] at time 06:44:34.930687 duration_in_ms=10.319
2019-11-21 06:44:34,931 [salt.state       :1780][INFO    ][19706] Running state [a2enmod wsgi] at time 06:44:34.931499
2019-11-21 06:44:34,931 [salt.state       :1813][INFO    ][19706] Executing state cmd.run for [a2enmod wsgi]
2019-11-21 06:44:34,932 [salt.state       :300 ][INFO    ][19706] /etc/apache2/mods-enabled/wsgi.load exists
2019-11-21 06:44:34,933 [salt.state       :1951][INFO    ][19706] Completed state [a2enmod wsgi] at time 06:44:34.932973 duration_in_ms=1.474
2019-11-21 06:44:34,933 [salt.state       :1780][INFO    ][19706] Running state [a2enmod status -q] at time 06:44:34.933737
2019-11-21 06:44:34,934 [salt.state       :1813][INFO    ][19706] Executing state cmd.run for [a2enmod status -q]
2019-11-21 06:44:34,934 [salt.state       :300 ][INFO    ][19706] /etc/apache2/mods-enabled/status.load exists
2019-11-21 06:44:34,935 [salt.state       :1951][INFO    ][19706] Completed state [a2enmod status -q] at time 06:44:34.935186 duration_in_ms=1.448
2019-11-21 06:44:34,939 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:44:34.939574
2019-11-21 06:44:34,940 [salt.state       :1813][INFO    ][19706] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-11-21 06:44:34,940 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-11-21 06:44:34,941 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:44:34.941059 duration_in_ms=1.485
2019-11-21 06:44:34,941 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:44:34.941505
2019-11-21 06:44:34,941 [salt.state       :1813][INFO    ][19706] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-11-21 06:44:34,942 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-11-21 06:44:34,942 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:44:34.942787 duration_in_ms=1.282
2019-11-21 06:44:34,943 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:44:34.943212
2019-11-21 06:44:34,943 [salt.state       :1813][INFO    ][19706] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-11-21 06:44:34,944 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-11-21 06:44:34,944 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:44:34.944490 duration_in_ms=1.278
2019-11-21 06:44:34,944 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:44:34.944914
2019-11-21 06:44:34,945 [salt.state       :1813][INFO    ][19706] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-11-21 06:44:34,945 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-11-21 06:44:34,946 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:44:34.946208 duration_in_ms=1.294
2019-11-21 06:44:34,948 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 06:44:34.948544
2019-11-21 06:44:34,949 [salt.state       :1813][INFO    ][19706] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-11-21 06:44:35,022 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-11-21 06:44:35,023 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 06:44:35.023216 duration_in_ms=74.672
2019-11-21 06:44:35,024 [salt.state       :1780][INFO    ][19706] Running state [a2enmod mpm_event] at time 06:44:35.024314
2019-11-21 06:44:35,024 [salt.state       :1813][INFO    ][19706] Executing state cmd.run for [a2enmod mpm_event]
2019-11-21 06:44:35,025 [salt.state       :300 ][INFO    ][19706] /etc/apache2/mods-enabled/mpm_event.load exists
2019-11-21 06:44:35,025 [salt.state       :1951][INFO    ][19706] Completed state [a2enmod mpm_event] at time 06:44:35.025737 duration_in_ms=1.423
2019-11-21 06:44:35,026 [salt.state       :1780][INFO    ][19706] Running state [apache_server_service_task] at time 06:44:35.026754
2019-11-21 06:44:35,027 [salt.state       :1813][INFO    ][19706] Executing state test.show_notification for [apache_server_service_task]
2019-11-21 06:44:35,027 [salt.state       :300 ][INFO    ][19706] Running apache.server.service
2019-11-21 06:44:35,028 [salt.state       :1951][INFO    ][19706] Completed state [apache_server_service_task] at time 06:44:35.028007 duration_in_ms=1.253
2019-11-21 06:44:35,028 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/ports.conf] at time 06:44:35.028668
2019-11-21 06:44:35,029 [salt.state       :1813][INFO    ][19706] Executing state file.managed for [/etc/apache2/ports.conf]
2019-11-21 06:44:35,096 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/ports.conf is in the correct state
2019-11-21 06:44:35,096 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/ports.conf] at time 06:44:35.096674 duration_in_ms=68.006
2019-11-21 06:44:35,097 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/conf-available/security.conf] at time 06:44:35.097383
2019-11-21 06:44:35,097 [salt.state       :1813][INFO    ][19706] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-11-21 06:44:35,167 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/conf-available/security.conf is in the correct state
2019-11-21 06:44:35,168 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/conf-available/security.conf] at time 06:44:35.167983 duration_in_ms=70.599
2019-11-21 06:44:35,180 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 06:44:35.180197
2019-11-21 06:44:35,180 [salt.state       :1813][INFO    ][19706] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-11-21 06:44:35,181 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-11-21 06:44:35,181 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 06:44:35.181575 duration_in_ms=1.378
2019-11-21 06:44:35,182 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:44:35.182272
2019-11-21 06:44:35,183 [salt.state       :1813][INFO    ][19706] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-11-21 06:44:35,407 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-11-21 06:44:35,407 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:44:35.407764 duration_in_ms=225.491
2019-11-21 06:44:35,408 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:44:35.408486
2019-11-21 06:44:35,408 [salt.state       :1813][INFO    ][19706] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-11-21 06:44:35,712 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-11-21 06:44:35,713 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:44:35.713377 duration_in_ms=304.89
2019-11-21 06:44:35,714 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:44:35.714121
2019-11-21 06:44:35,714 [salt.state       :1813][INFO    ][19706] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-11-21 06:44:35,716 [salt.state       :300 ][INFO    ][19706] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-11-21 06:44:35,716 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:44:35.716843 duration_in_ms=2.722
2019-11-21 06:44:35,717 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:44:35.717572
2019-11-21 06:44:35,718 [salt.state       :1813][INFO    ][19706] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-11-21 06:44:35,939 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-11-21 06:44:35,939 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:44:35.939694 duration_in_ms=222.121
2019-11-21 06:44:35,940 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:44:35.940431
2019-11-21 06:44:35,940 [salt.state       :1813][INFO    ][19706] Executing state file.managed for [/etc/apache2/sites-available/wsgi_openstack_web.conf]
2019-11-21 06:44:36,150 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/sites-available/wsgi_openstack_web.conf is in the correct state
2019-11-21 06:44:36,151 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:44:36.151444 duration_in_ms=211.012
2019-11-21 06:44:36,152 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:44:36.152187
2019-11-21 06:44:36,152 [salt.state       :1813][INFO    ][19706] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-11-21 06:44:36,358 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-11-21 06:44:36,359 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:44:36.359050 duration_in_ms=206.862
2019-11-21 06:44:36,359 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:44:36.359796
2019-11-21 06:44:36,360 [salt.state       :1813][INFO    ][19706] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-11-21 06:44:36,655 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-11-21 06:44:36,655 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:44:36.655764 duration_in_ms=295.967
2019-11-21 06:44:36,659 [salt.state       :1780][INFO    ][19706] Running state [apache2] at time 06:44:36.659649
2019-11-21 06:44:36,660 [salt.state       :1813][INFO    ][19706] Executing state service.running for [apache2]
2019-11-21 06:44:36,660 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-11-21 06:44:36,689 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:44:36,704 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:44:36,719 [salt.state       :300 ][INFO    ][19706] The service apache2 is already running
2019-11-21 06:44:36,720 [salt.state       :1951][INFO    ][19706] Completed state [apache2] at time 06:44:36.720375 duration_in_ms=60.726
2019-11-21 06:44:36,721 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/conf-enabled/security.conf] at time 06:44:36.721623
2019-11-21 06:44:36,722 [salt.state       :1813][INFO    ][19706] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-11-21 06:44:36,724 [salt.state       :300 ][INFO    ][19706] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-11-21 06:44:36,724 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/conf-enabled/security.conf] at time 06:44:36.724694 duration_in_ms=3.071
2019-11-21 06:44:36,725 [salt.state       :1780][INFO    ][19706] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:44:36.725185
2019-11-21 06:44:36,725 [salt.state       :1813][INFO    ][19706] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-11-21 06:44:36,726 [salt.state       :300 ][INFO    ][19706] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-11-21 06:44:36,726 [salt.state       :1951][INFO    ][19706] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:44:36.726585 duration_in_ms=1.4
2019-11-21 06:44:36,727 [salt.state       :1780][INFO    ][19706] Running state [panko-api] at time 06:44:36.727634
2019-11-21 06:44:36,728 [salt.state       :1813][INFO    ][19706] Executing state pkg.installed for [panko-api]
2019-11-21 06:44:36,753 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2019-11-21 06:44:36,812 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:44:38,949 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:44:38,980 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2019-11-21 06:44:40,338 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064440325698
2019-11-21 06:44:40,353 [salt.minion      :1432][INFO    ][20293] Starting a new job with PID 20293
2019-11-21 06:44:40,374 [salt.minion      :1711][INFO    ][20293] Returning information for job: 20191121064440325698
2019-11-21 06:44:42,405 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:44:42,470 [salt.state       :300 ][INFO    ][19706] Made the following changes:
'panko-common' changed from 'absent' to '5.0.0-2~u16.04+mcp12'
'panko-api' changed from 'absent' to '5.0.0-2~u16.04+mcp12'
'python-panko' changed from 'absent' to '5.0.0-2~u16.04+mcp12'
'python-pankoclient' changed from 'absent' to '0.5.0-2~u16.04+mcp7'

2019-11-21 06:44:42,504 [salt.state       :915 ][INFO    ][19706] Loading fresh modules for state activity
2019-11-21 06:44:42,555 [salt.state       :1951][INFO    ][19706] Completed state [panko-api] at time 06:44:42.555590 duration_in_ms=5827.954
2019-11-21 06:44:42,559 [salt.state       :1780][INFO    ][19706] Running state [panko_ssl_mysql] at time 06:44:42.559340
2019-11-21 06:44:42,559 [salt.state       :1813][INFO    ][19706] Executing state test.show_notification for [panko_ssl_mysql]
2019-11-21 06:44:42,560 [salt.state       :300 ][INFO    ][19706] Running panko._ssl.mysql
2019-11-21 06:44:42,560 [salt.state       :1951][INFO    ][19706] Completed state [panko_ssl_mysql] at time 06:44:42.560555 duration_in_ms=1.214
2019-11-21 06:44:42,564 [salt.state       :1780][INFO    ][19706] Running state [/etc/panko/panko.conf] at time 06:44:42.564905
2019-11-21 06:44:42,565 [salt.state       :1813][INFO    ][19706] Executing state file.managed for [/etc/panko/panko.conf]
2019-11-21 06:44:42,594 [salt.fileclient  :1219][INFO    ][19706] Fetching file from saltenv 'base', ** done ** 'panko/files/rocky/panko.conf.Debian'
2019-11-21 06:44:42,761 [salt.state       :300 ][INFO    ][19706] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,23 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,73 +158,77 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@172.16.10.36/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 280
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -248,50 +238,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-#
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -306,6 +310,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://172.16.10.36:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -321,6 +326,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://172.16.10.36:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -358,6 +364,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -371,36 +378,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -478,68 +455,115 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2019-11-21 06:44:42,762 [salt.state       :1951][INFO    ][19706] Completed state [/etc/panko/panko.conf] at time 06:44:42.762183 duration_in_ms=197.276
2019-11-21 06:44:42,763 [salt.state       :1780][INFO    ][19706] Running state [panko-dbsync] at time 06:44:42.763352
2019-11-21 06:44:42,763 [salt.state       :1813][INFO    ][19706] Executing state cmd.run for [panko-dbsync]
2019-11-21 06:44:42,769 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command 'panko-dbsync' in directory '/root'
2019-11-21 06:44:45,242 [salt.state       :300 ][INFO    ][19706] {'pid': 20457, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:44:45,242 [salt.state       :1951][INFO    ][19706] Completed state [panko-dbsync] at time 06:44:45.242895 duration_in_ms=2479.584
2019-11-21 06:44:45,250 [salt.state       :1780][INFO    ][19706] Running state [wsgi_panko] at time 06:44:45.250414
2019-11-21 06:44:45,250 [salt.state       :1813][INFO    ][19706] Executing state apache_site.enabled for [wsgi_panko]
2019-11-21 06:44:45,251 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2019-11-21 06:44:45,306 [salt.state       :300 ][INFO    ][19706] {'new': 'wsgi_panko', 'old': None}
2019-11-21 06:44:45,307 [salt.state       :1951][INFO    ][19706] Completed state [wsgi_panko] at time 06:44:45.307009 duration_in_ms=56.595
2019-11-21 06:44:45,899 [salt.state       :1780][INFO    ][19706] Running state [apache2] at time 06:44:45.899176
2019-11-21 06:44:45,899 [salt.state       :1813][INFO    ][19706] Executing state service.running for [apache2]
2019-11-21 06:44:45,900 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:44:45,918 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:44:45,937 [salt.state       :300 ][INFO    ][19706] The service apache2 is already running
2019-11-21 06:44:45,938 [salt.state       :1951][INFO    ][19706] Completed state [apache2] at time 06:44:45.938373 duration_in_ms=39.198
2019-11-21 06:44:45,938 [salt.state       :1780][INFO    ][19706] Running state [apache2] at time 06:44:45.938739
2019-11-21 06:44:45,939 [salt.state       :1813][INFO    ][19706] Executing state service.mod_watch for [apache2]
2019-11-21 06:44:45,940 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:44:45,957 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19706] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-11-21 06:44:48,234 [salt.state       :300 ][INFO    ][19706] {'apache2': True}
2019-11-21 06:44:48,235 [salt.state       :1951][INFO    ][19706] Completed state [apache2] at time 06:44:48.234892 duration_in_ms=2296.151
2019-11-21 06:44:48,245 [salt.minion      :1711][INFO    ][19706] Returning information for job: 20191121064425266969
2019-11-21 06:44:48,820 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121064448807748
2019-11-21 06:44:48,834 [salt.minion      :1432][INFO    ][20948] Starting a new job with PID 20948
2019-11-21 06:44:55,255 [salt.state       :915 ][INFO    ][20948] Loading fresh modules for state activity
2019-11-21 06:44:55,321 [salt.fileclient  :1219][INFO    ][20948] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2019-11-21 06:44:55,358 [salt.fileclient  :1219][INFO    ][20948] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2019-11-21 06:44:55,606 [salt.fileclient  :1219][INFO    ][20948] Fetching file from saltenv 'base', ** done ** 'aodh/db/offline_sync.sls'
2019-11-21 06:44:55,681 [salt.fileclient  :1219][INFO    ][20948] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2019-11-21 06:44:55,742 [salt.fileclient  :1219][INFO    ][20948] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2019-11-21 06:44:57,172 [keyring.backend  :154 ][INFO    ][20948] Loading Windows (alt)
2019-11-21 06:44:57,175 [keyring.backend  :154 ][INFO    ][20948] Loading pyfs
2019-11-21 06:44:57,176 [keyring.backend  :154 ][INFO    ][20948] Loading multi
2019-11-21 06:44:57,176 [keyring.backend  :154 ][INFO    ][20948] Loading Google
2019-11-21 06:44:57,177 [keyring.backend  :154 ][INFO    ][20948] Loading Gnome
2019-11-21 06:44:57,181 [keyring.backend  :154 ][INFO    ][20948] Loading keyczar
2019-11-21 06:44:57,181 [keyring.backend  :154 ][INFO    ][20948] Loading file
2019-11-21 06:44:57,182 [keyring.backend  :154 ][INFO    ][20948] Loading kwallet
2019-11-21 06:44:58,119 [salt.state       :1780][INFO    ][20948] Running state [aodh-api] at time 06:44:58.119804
2019-11-21 06:44:58,120 [salt.state       :1813][INFO    ][20948] Executing state pkg.installed for [aodh-api]
2019-11-21 06:44:58,120 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:44:58,729 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2019-11-21 06:44:58,822 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:45:00,829 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:45:00,861 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2019-11-21 06:45:03,950 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064503931981
2019-11-21 06:45:03,972 [salt.minion      :1432][INFO    ][21451] Starting a new job with PID 21451
2019-11-21 06:45:03,992 [salt.minion      :1711][INFO    ][21451] Returning information for job: 20191121064503931981
2019-11-21 06:45:22,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:45:22,407 [salt.state       :300 ][INFO    ][20948] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'c++-compiler' changed from 'absent' to '1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-169.198'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '7.0.0-1~u16.04+mcp10'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.6'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'libc-dev' changed from 'absent' to '1'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu11'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.6'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '7.0.0-1~u16.04+mcp10'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu11'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'python-aodh' changed from 'absent' to '7.0.0-1~u16.04+mcp10'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.12'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.8'

2019-11-21 06:45:22,448 [salt.state       :915 ][INFO    ][20948] Loading fresh modules for state activity
2019-11-21 06:45:22,494 [salt.state       :1951][INFO    ][20948] Completed state [aodh-api] at time 06:45:22.494544 duration_in_ms=24374.738
2019-11-21 06:45:22,507 [salt.state       :1780][INFO    ][20948] Running state [aodh-evaluator] at time 06:45:22.507363
2019-11-21 06:45:22,507 [salt.state       :1813][INFO    ][20948] Executing state pkg.installed for [aodh-evaluator]
2019-11-21 06:45:23,345 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:45:23,385 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2019-11-21 06:45:26,983 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:45:27,038 [salt.state       :300 ][INFO    ][20948] Made the following changes:
'aodh-evaluator' changed from 'absent' to '7.0.0-1~u16.04+mcp10'

2019-11-21 06:45:27,067 [salt.state       :915 ][INFO    ][20948] Loading fresh modules for state activity
2019-11-21 06:45:27,110 [salt.state       :1951][INFO    ][20948] Completed state [aodh-evaluator] at time 06:45:27.110071 duration_in_ms=4602.707
2019-11-21 06:45:27,116 [salt.state       :1780][INFO    ][20948] Running state [aodh-notifier] at time 06:45:27.116438
2019-11-21 06:45:27,117 [salt.state       :1813][INFO    ][20948] Executing state pkg.installed for [aodh-notifier]
2019-11-21 06:45:28,032 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:45:28,074 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2019-11-21 06:45:31,885 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:45:31,944 [salt.state       :300 ][INFO    ][20948] Made the following changes:
'aodh-notifier' changed from 'absent' to '7.0.0-1~u16.04+mcp10'

2019-11-21 06:45:31,973 [salt.state       :915 ][INFO    ][20948] Loading fresh modules for state activity
2019-11-21 06:45:32,014 [salt.state       :1951][INFO    ][20948] Completed state [aodh-notifier] at time 06:45:32.014667 duration_in_ms=4898.228
2019-11-21 06:45:32,020 [salt.state       :1780][INFO    ][20948] Running state [aodh-listener] at time 06:45:32.020602
2019-11-21 06:45:32,020 [salt.state       :1813][INFO    ][20948] Executing state pkg.installed for [aodh-listener]
2019-11-21 06:45:33,471 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:45:33,507 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2019-11-21 06:45:34,163 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064534154301
2019-11-21 06:45:34,186 [salt.minion      :1432][INFO    ][27848] Starting a new job with PID 27848
2019-11-21 06:45:34,211 [salt.minion      :1711][INFO    ][27848] Returning information for job: 20191121064534154301
2019-11-21 06:45:37,545 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:45:37,610 [salt.state       :300 ][INFO    ][20948] Made the following changes:
'aodh-listener' changed from 'absent' to '7.0.0-1~u16.04+mcp10'

2019-11-21 06:45:37,645 [salt.state       :915 ][INFO    ][20948] Loading fresh modules for state activity
2019-11-21 06:45:37,689 [salt.state       :1951][INFO    ][20948] Completed state [aodh-listener] at time 06:45:37.689916 duration_in_ms=5669.313
2019-11-21 06:45:37,696 [salt.state       :1780][INFO    ][20948] Running state [python-aodhclient] at time 06:45:37.696723
2019-11-21 06:45:37,697 [salt.state       :1813][INFO    ][20948] Executing state pkg.installed for [python-aodhclient]
2019-11-21 06:45:38,480 [salt.state       :300 ][INFO    ][20948] All specified packages are already installed
2019-11-21 06:45:38,481 [salt.state       :1951][INFO    ][20948] Completed state [python-aodhclient] at time 06:45:38.481762 duration_in_ms=785.038
2019-11-21 06:45:38,486 [salt.state       :1780][INFO    ][20948] Running state [aodh_ssl_mysql] at time 06:45:38.486763
2019-11-21 06:45:38,487 [salt.state       :1813][INFO    ][20948] Executing state test.show_notification for [aodh_ssl_mysql]
2019-11-21 06:45:38,487 [salt.state       :300 ][INFO    ][20948] Running aodh._ssl.mysql
2019-11-21 06:45:38,488 [salt.state       :1951][INFO    ][20948] Completed state [aodh_ssl_mysql] at time 06:45:38.488231 duration_in_ms=1.471
2019-11-21 06:45:38,488 [salt.state       :1780][INFO    ][20948] Running state [aodh_ssl_rabbitmq] at time 06:45:38.488944
2019-11-21 06:45:38,489 [salt.state       :1813][INFO    ][20948] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2019-11-21 06:45:38,489 [salt.state       :300 ][INFO    ][20948] Running aodh._ssl.rabbitmq
2019-11-21 06:45:38,490 [salt.state       :1951][INFO    ][20948] Completed state [aodh_ssl_rabbitmq] at time 06:45:38.490347 duration_in_ms=1.403
2019-11-21 06:45:38,491 [salt.state       :1780][INFO    ][20948] Running state [/etc/aodh/aodh.conf] at time 06:45:38.491447
2019-11-21 06:45:38,491 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/aodh/aodh.conf]
2019-11-21 06:45:38,516 [salt.fileclient  :1219][INFO    ][20948] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/aodh.conf.Debian'
2019-11-21 06:45:38,692 [salt.fileclient  :1219][INFO    ][20948] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2019-11-21 06:45:38,787 [salt.state       :300 ][INFO    ][20948] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,55 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +133,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +144,84 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+rpc_thread_pool_size = 5
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +232,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +368,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 172.16.10.36
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-62HTaC/aodh-7.0.0/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +381,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -406,38 +421,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +430,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,71 +442,75 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@172.16.10.36/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 280
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -532,32 +520,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -571,36 +566,550 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -615,6 +1124,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://172.16.10.36:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -630,6 +1140,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://172.16.10.36:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -667,6 +1178,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -680,36 +1192,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -787,862 +1269,112 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2019-11-21 06:45:38,794 [salt.state       :1951][INFO    ][20948] Completed state [/etc/aodh/aodh.conf] at time 06:45:38.793943 duration_in_ms=302.494
2019-11-21 06:45:38,795 [salt.state       :1780][INFO    ][20948] Running state [aodh-dbsync] at time 06:45:38.795773
2019-11-21 06:45:38,796 [salt.state       :1813][INFO    ][20948] Executing state cmd.run for [aodh-dbsync]
2019-11-21 06:45:38,796 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command 'aodh-dbsync' in directory '/root'
2019-11-21 06:45:41,619 [salt.state       :300 ][INFO    ][20948] {'pid': 28152, 'retcode': 0, 'stderr': '', 'stdout': '2019-11-21 06:45:41.453 28153 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\x1b[00m\n2019-11-21 06:45:41.453 28153 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.\x1b[00m'}
2019-11-21 06:45:41,619 [salt.state       :1951][INFO    ][20948] Completed state [aodh-dbsync] at time 06:45:41.619493 duration_in_ms=2823.719
2019-11-21 06:45:41,620 [salt.state       :1780][INFO    ][20948] Running state [apache2] at time 06:45:41.620899
2019-11-21 06:45:41,621 [salt.state       :1813][INFO    ][20948] Executing state pkg.installed for [apache2]
2019-11-21 06:45:41,632 [salt.state       :300 ][INFO    ][20948] All specified packages are already installed
2019-11-21 06:45:41,632 [salt.state       :1951][INFO    ][20948] Completed state [apache2] at time 06:45:41.632339 duration_in_ms=11.44
2019-11-21 06:45:41,632 [salt.state       :1780][INFO    ][20948] Running state [openssl] at time 06:45:41.632584
2019-11-21 06:45:41,632 [salt.state       :1813][INFO    ][20948] Executing state pkg.installed for [openssl]
2019-11-21 06:45:41,641 [salt.state       :300 ][INFO    ][20948] All specified packages are already installed
2019-11-21 06:45:41,642 [salt.state       :1951][INFO    ][20948] Completed state [openssl] at time 06:45:41.642129 duration_in_ms=9.545
2019-11-21 06:45:41,643 [salt.state       :1780][INFO    ][20948] Running state [a2enmod ssl] at time 06:45:41.643693
2019-11-21 06:45:41,643 [salt.state       :1813][INFO    ][20948] Executing state cmd.run for [a2enmod ssl]
2019-11-21 06:45:41,644 [salt.state       :300 ][INFO    ][20948] /etc/apache2/mods-enabled/ssl.load exists
2019-11-21 06:45:41,644 [salt.state       :1951][INFO    ][20948] Completed state [a2enmod ssl] at time 06:45:41.644545 duration_in_ms=0.851
2019-11-21 06:45:41,645 [salt.state       :1780][INFO    ][20948] Running state [a2enmod rewrite] at time 06:45:41.645210
2019-11-21 06:45:41,645 [salt.state       :1813][INFO    ][20948] Executing state cmd.run for [a2enmod rewrite]
2019-11-21 06:45:41,645 [salt.state       :300 ][INFO    ][20948] /etc/apache2/mods-enabled/rewrite.load exists
2019-11-21 06:45:41,646 [salt.state       :1951][INFO    ][20948] Completed state [a2enmod rewrite] at time 06:45:41.646051 duration_in_ms=0.841
2019-11-21 06:45:41,646 [salt.state       :1780][INFO    ][20948] Running state [libapache2-mod-wsgi] at time 06:45:41.646618
2019-11-21 06:45:41,646 [salt.state       :1813][INFO    ][20948] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-11-21 06:45:41,655 [salt.state       :300 ][INFO    ][20948] All specified packages are already installed
2019-11-21 06:45:41,656 [salt.state       :1951][INFO    ][20948] Completed state [libapache2-mod-wsgi] at time 06:45:41.656059 duration_in_ms=9.441
2019-11-21 06:45:41,656 [salt.state       :1780][INFO    ][20948] Running state [a2enmod wsgi] at time 06:45:41.656635
2019-11-21 06:45:41,656 [salt.state       :1813][INFO    ][20948] Executing state cmd.run for [a2enmod wsgi]
2019-11-21 06:45:41,657 [salt.state       :300 ][INFO    ][20948] /etc/apache2/mods-enabled/wsgi.load exists
2019-11-21 06:45:41,657 [salt.state       :1951][INFO    ][20948] Completed state [a2enmod wsgi] at time 06:45:41.657491 duration_in_ms=0.856
2019-11-21 06:45:41,658 [salt.state       :1780][INFO    ][20948] Running state [a2enmod status -q] at time 06:45:41.658068
2019-11-21 06:45:41,658 [salt.state       :1813][INFO    ][20948] Executing state cmd.run for [a2enmod status -q]
2019-11-21 06:45:41,658 [salt.state       :300 ][INFO    ][20948] /etc/apache2/mods-enabled/status.load exists
2019-11-21 06:45:41,658 [salt.state       :1951][INFO    ][20948] Completed state [a2enmod status -q] at time 06:45:41.658888 duration_in_ms=0.819
2019-11-21 06:45:41,659 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:45:41.659128
2019-11-21 06:45:41,659 [salt.state       :1813][INFO    ][20948] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-11-21 06:45:41,659 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-11-21 06:45:41,659 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:45:41.659941 duration_in_ms=0.813
2019-11-21 06:45:41,660 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:45:41.660177
2019-11-21 06:45:41,660 [salt.state       :1813][INFO    ][20948] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-11-21 06:45:41,660 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-11-21 06:45:41,660 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:45:41.660949 duration_in_ms=0.771
2019-11-21 06:45:41,661 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:45:41.661198
2019-11-21 06:45:41,661 [salt.state       :1813][INFO    ][20948] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-11-21 06:45:41,661 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-11-21 06:45:41,661 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:45:41.661939 duration_in_ms=0.741
2019-11-21 06:45:41,662 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:45:41.662171
2019-11-21 06:45:41,662 [salt.state       :1813][INFO    ][20948] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-11-21 06:45:41,662 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-11-21 06:45:41,662 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:45:41.662896 duration_in_ms=0.724
2019-11-21 06:45:41,665 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 06:45:41.665450
2019-11-21 06:45:41,665 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-11-21 06:45:41,730 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-11-21 06:45:41,731 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 06:45:41.731051 duration_in_ms=65.601
2019-11-21 06:45:41,732 [salt.state       :1780][INFO    ][20948] Running state [a2enmod mpm_event] at time 06:45:41.732172
2019-11-21 06:45:41,732 [salt.state       :1813][INFO    ][20948] Executing state cmd.run for [a2enmod mpm_event]
2019-11-21 06:45:41,732 [salt.state       :300 ][INFO    ][20948] /etc/apache2/mods-enabled/mpm_event.load exists
2019-11-21 06:45:41,733 [salt.state       :1951][INFO    ][20948] Completed state [a2enmod mpm_event] at time 06:45:41.733011 duration_in_ms=0.838
2019-11-21 06:45:41,733 [salt.state       :1780][INFO    ][20948] Running state [apache_server_service_task] at time 06:45:41.733282
2019-11-21 06:45:41,733 [salt.state       :1813][INFO    ][20948] Executing state test.show_notification for [apache_server_service_task]
2019-11-21 06:45:41,733 [salt.state       :300 ][INFO    ][20948] Running apache.server.service
2019-11-21 06:45:41,734 [salt.state       :1951][INFO    ][20948] Completed state [apache_server_service_task] at time 06:45:41.734020 duration_in_ms=0.738
2019-11-21 06:45:41,734 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/ports.conf] at time 06:45:41.734594
2019-11-21 06:45:41,734 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/apache2/ports.conf]
2019-11-21 06:45:41,798 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/ports.conf is in the correct state
2019-11-21 06:45:41,799 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/ports.conf] at time 06:45:41.799175 duration_in_ms=64.581
2019-11-21 06:45:41,799 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/conf-available/security.conf] at time 06:45:41.799759
2019-11-21 06:45:41,800 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-11-21 06:45:41,866 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/conf-available/security.conf is in the correct state
2019-11-21 06:45:41,866 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/conf-available/security.conf] at time 06:45:41.866257 duration_in_ms=66.497
2019-11-21 06:45:41,880 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 06:45:41.880414
2019-11-21 06:45:41,880 [salt.state       :1813][INFO    ][20948] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-11-21 06:45:41,881 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-11-21 06:45:41,881 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 06:45:41.881227 duration_in_ms=0.812
2019-11-21 06:45:41,881 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:45:41.881834
2019-11-21 06:45:41,882 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-11-21 06:45:42,085 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-11-21 06:45:42,086 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:45:42.086026 duration_in_ms=204.192
2019-11-21 06:45:42,086 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:45:42.086732
2019-11-21 06:45:42,087 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-11-21 06:45:42,415 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-11-21 06:45:42,416 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:45:42.416049 duration_in_ms=329.317
2019-11-21 06:45:42,416 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:45:42.416773
2019-11-21 06:45:42,417 [salt.state       :1813][INFO    ][20948] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-11-21 06:45:42,418 [salt.state       :300 ][INFO    ][20948] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-11-21 06:45:42,419 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:45:42.419218 duration_in_ms=2.445
2019-11-21 06:45:42,419 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:45:42.419881
2019-11-21 06:45:42,420 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-11-21 06:45:42,630 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-11-21 06:45:42,631 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:45:42.631217 duration_in_ms=211.335
2019-11-21 06:45:42,631 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:45:42.631956
2019-11-21 06:45:42,632 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/apache2/sites-available/wsgi_openstack_web.conf]
2019-11-21 06:45:42,844 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/sites-available/wsgi_openstack_web.conf is in the correct state
2019-11-21 06:45:42,844 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:45:42.844384 duration_in_ms=212.427
2019-11-21 06:45:42,845 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:45:42.845141
2019-11-21 06:45:42,845 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-11-21 06:45:43,066 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-11-21 06:45:43,066 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:45:43.066831 duration_in_ms=221.689
2019-11-21 06:45:43,067 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:45:43.067505
2019-11-21 06:45:43,067 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-11-21 06:45:43,277 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-11-21 06:45:43,278 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:45:43.278153 duration_in_ms=210.647
2019-11-21 06:45:43,282 [salt.state       :1780][INFO    ][20948] Running state [apache2] at time 06:45:43.282632
2019-11-21 06:45:43,282 [salt.state       :1813][INFO    ][20948] Executing state service.running for [apache2]
2019-11-21 06:45:43,283 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-11-21 06:45:43,302 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:45:43,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:45:43,332 [salt.state       :300 ][INFO    ][20948] The service apache2 is already running
2019-11-21 06:45:43,332 [salt.state       :1951][INFO    ][20948] Completed state [apache2] at time 06:45:43.332795 duration_in_ms=50.162
2019-11-21 06:45:43,334 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/conf-enabled/security.conf] at time 06:45:43.334088
2019-11-21 06:45:43,334 [salt.state       :1813][INFO    ][20948] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-11-21 06:45:43,336 [salt.state       :300 ][INFO    ][20948] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-11-21 06:45:43,336 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/conf-enabled/security.conf] at time 06:45:43.336672 duration_in_ms=2.584
2019-11-21 06:45:43,336 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:45:43.336946
2019-11-21 06:45:43,337 [salt.state       :1813][INFO    ][20948] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-11-21 06:45:43,337 [salt.state       :300 ][INFO    ][20948] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-11-21 06:45:43,337 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:45:43.337836 duration_in_ms=0.89
2019-11-21 06:45:43,338 [salt.state       :1780][INFO    ][20948] Running state [/etc/default/aodh-evaluator] at time 06:45:43.338474
2019-11-21 06:45:43,338 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/default/aodh-evaluator]
2019-11-21 06:45:43,355 [salt.fileclient  :1219][INFO    ][20948] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2019-11-21 06:45:43,365 [salt.state       :300 ][INFO    ][20948] File changed:
New file
2019-11-21 06:45:43,366 [salt.state       :1951][INFO    ][20948] Completed state [/etc/default/aodh-evaluator] at time 06:45:43.366099 duration_in_ms=27.625
2019-11-21 06:45:43,366 [salt.state       :1780][INFO    ][20948] Running state [/etc/default/aodh-notifier] at time 06:45:43.366713
2019-11-21 06:45:43,367 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/default/aodh-notifier]
2019-11-21 06:45:43,385 [salt.state       :300 ][INFO    ][20948] File changed:
New file
2019-11-21 06:45:43,385 [salt.state       :1951][INFO    ][20948] Completed state [/etc/default/aodh-notifier] at time 06:45:43.385433 duration_in_ms=18.719
2019-11-21 06:45:43,386 [salt.state       :1780][INFO    ][20948] Running state [/etc/default/aodh-listener] at time 06:45:43.386053
2019-11-21 06:45:43,386 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/default/aodh-listener]
2019-11-21 06:45:43,405 [salt.state       :300 ][INFO    ][20948] File changed:
New file
2019-11-21 06:45:43,405 [salt.state       :1951][INFO    ][20948] Completed state [/etc/default/aodh-listener] at time 06:45:43.405434 duration_in_ms=19.381
2019-11-21 06:45:43,406 [salt.state       :1780][INFO    ][20948] Running state [/usr/bin/aodh-expirer] at time 06:45:43.406788
2019-11-21 06:45:43,407 [salt.state       :1813][INFO    ][20948] Executing state cron.present for [/usr/bin/aodh-expirer]
2019-11-21 06:45:43,407 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command 'crontab -u aodh -l' in directory '/root'
2019-11-21 06:45:43,422 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command 'crontab -u aodh /tmp/__salt.tmp.fjiUjU' in directory '/root'
2019-11-21 06:45:43,436 [salt.state       :300 ][INFO    ][20948] {'aodh': '/usr/bin/aodh-expirer'}
2019-11-21 06:45:43,436 [salt.state       :1951][INFO    ][20948] Completed state [/usr/bin/aodh-expirer] at time 06:45:43.436653 duration_in_ms=29.865
2019-11-21 06:45:43,437 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 06:45:43.437642
2019-11-21 06:45:43,438 [salt.state       :1813][INFO    ][20948] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2019-11-21 06:45:43,456 [salt.fileclient  :1219][INFO    ][20948] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/apache-aodh.apache2.conf.Debian'
2019-11-21 06:45:43,492 [salt.state       :300 ][INFO    ][20948] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 172.16.10.36:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2019-11-21 06:45:43,492 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 06:45:43.492430 duration_in_ms=54.788
2019-11-21 06:45:43,492 [salt.state       :1780][INFO    ][20948] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 06:45:43.492682
2019-11-21 06:45:43,492 [salt.state       :1813][INFO    ][20948] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2019-11-21 06:45:43,494 [salt.state       :300 ][INFO    ][20948] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2019-11-21 06:45:43,494 [salt.state       :1951][INFO    ][20948] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 06:45:43.494707 duration_in_ms=2.025
2019-11-21 06:45:43,495 [salt.state       :1780][INFO    ][20948] Running state [apache2] at time 06:45:43.495860
2019-11-21 06:45:43,496 [salt.state       :1813][INFO    ][20948] Executing state service.running for [apache2]
2019-11-21 06:45:43,496 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:45:43,512 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:45:43,529 [salt.state       :300 ][INFO    ][20948] The service apache2 is already running
2019-11-21 06:45:43,529 [salt.state       :1951][INFO    ][20948] Completed state [apache2] at time 06:45:43.529512 duration_in_ms=33.65
2019-11-21 06:45:43,529 [salt.state       :1780][INFO    ][20948] Running state [apache2] at time 06:45:43.529822
2019-11-21 06:45:43,530 [salt.state       :1813][INFO    ][20948] Executing state service.mod_watch for [apache2]
2019-11-21 06:45:43,530 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:45:43,545 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-11-21 06:45:51,803 [salt.state       :300 ][INFO    ][20948] {'apache2': True}
2019-11-21 06:45:51,804 [salt.state       :1951][INFO    ][20948] Completed state [apache2] at time 06:45:51.804312 duration_in_ms=8274.489
2019-11-21 06:45:51,807 [salt.state       :1780][INFO    ][20948] Running state [aodh-evaluator] at time 06:45:51.807362
2019-11-21 06:45:51,807 [salt.state       :1813][INFO    ][20948] Executing state service.running for [aodh-evaluator]
2019-11-21 06:45:51,808 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2019-11-21 06:45:51,830 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2019-11-21 06:45:51,848 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2019-11-21 06:45:51,868 [salt.state       :300 ][INFO    ][20948] The service aodh-evaluator is already running
2019-11-21 06:45:51,869 [salt.state       :1951][INFO    ][20948] Completed state [aodh-evaluator] at time 06:45:51.869448 duration_in_ms=62.085
2019-11-21 06:45:51,870 [salt.state       :1780][INFO    ][20948] Running state [aodh-evaluator] at time 06:45:51.870072
2019-11-21 06:45:51,870 [salt.state       :1813][INFO    ][20948] Executing state service.mod_watch for [aodh-evaluator]
2019-11-21 06:45:51,872 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2019-11-21 06:45:51,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2019-11-21 06:45:52,086 [salt.state       :300 ][INFO    ][20948] {'aodh-evaluator': True}
2019-11-21 06:45:52,092 [salt.state       :1951][INFO    ][20948] Completed state [aodh-evaluator] at time 06:45:52.092069 duration_in_ms=221.996
2019-11-21 06:45:52,095 [salt.state       :1780][INFO    ][20948] Running state [aodh-notifier] at time 06:45:52.095756
2019-11-21 06:45:52,096 [salt.state       :1813][INFO    ][20948] Executing state service.running for [aodh-notifier]
2019-11-21 06:45:52,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2019-11-21 06:45:52,128 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2019-11-21 06:45:52,145 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2019-11-21 06:45:52,159 [salt.state       :300 ][INFO    ][20948] The service aodh-notifier is already running
2019-11-21 06:45:52,160 [salt.state       :1951][INFO    ][20948] Completed state [aodh-notifier] at time 06:45:52.160173 duration_in_ms=64.416
2019-11-21 06:45:52,160 [salt.state       :1780][INFO    ][20948] Running state [aodh-notifier] at time 06:45:52.160445
2019-11-21 06:45:52,160 [salt.state       :1813][INFO    ][20948] Executing state service.mod_watch for [aodh-notifier]
2019-11-21 06:45:52,161 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2019-11-21 06:45:52,176 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2019-11-21 06:46:03,559 [salt.state       :300 ][INFO    ][20948] {'aodh-notifier': True}
2019-11-21 06:46:03,559 [salt.state       :1951][INFO    ][20948] Completed state [aodh-notifier] at time 06:46:03.559592 duration_in_ms=11399.146
2019-11-21 06:46:03,561 [salt.state       :1780][INFO    ][20948] Running state [aodh-listener] at time 06:46:03.561441
2019-11-21 06:46:03,562 [salt.state       :1813][INFO    ][20948] Executing state service.running for [aodh-listener]
2019-11-21 06:46:03,563 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2019-11-21 06:46:03,586 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2019-11-21 06:46:03,601 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2019-11-21 06:46:03,622 [salt.state       :300 ][INFO    ][20948] The service aodh-listener is already running
2019-11-21 06:46:03,622 [salt.state       :1951][INFO    ][20948] Completed state [aodh-listener] at time 06:46:03.622856 duration_in_ms=61.414
2019-11-21 06:46:03,623 [salt.state       :1780][INFO    ][20948] Running state [aodh-listener] at time 06:46:03.623326
2019-11-21 06:46:03,624 [salt.state       :1813][INFO    ][20948] Executing state service.mod_watch for [aodh-listener]
2019-11-21 06:46:03,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2019-11-21 06:46:03,642 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20948] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2019-11-21 06:46:04,199 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064604189304
2019-11-21 06:46:04,219 [salt.minion      :1432][INFO    ][28908] Starting a new job with PID 28908
2019-11-21 06:46:04,235 [salt.minion      :1711][INFO    ][28908] Returning information for job: 20191121064604189304
2019-11-21 06:46:08,993 [salt.state       :300 ][INFO    ][20948] {'aodh-listener': True}
2019-11-21 06:46:08,993 [salt.state       :1951][INFO    ][20948] Completed state [aodh-listener] at time 06:46:08.993450 duration_in_ms=5370.124
2019-11-21 06:46:09,028 [salt.minion      :1711][INFO    ][20948] Returning information for job: 20191121064448807748
2019-11-21 06:46:09,582 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121064609572175
2019-11-21 06:46:09,594 [salt.minion      :1432][INFO    ][29007] Starting a new job with PID 29007
2019-11-21 06:46:16,101 [salt.state       :915 ][INFO    ][29007] Loading fresh modules for state activity
2019-11-21 06:46:16,170 [salt.fileclient  :1219][INFO    ][29007] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2019-11-21 06:46:16,202 [salt.fileclient  :1219][INFO    ][29007] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2019-11-21 06:46:16,358 [salt.fileclient  :1219][INFO    ][29007] Fetching file from saltenv 'base', ** done ** 'ceilometer/_ssl/rabbitmq.sls'
2019-11-21 06:46:17,268 [keyring.backend  :154 ][INFO    ][29007] Loading Windows (alt)
2019-11-21 06:46:17,271 [keyring.backend  :154 ][INFO    ][29007] Loading pyfs
2019-11-21 06:46:17,273 [keyring.backend  :154 ][INFO    ][29007] Loading multi
2019-11-21 06:46:17,273 [keyring.backend  :154 ][INFO    ][29007] Loading Google
2019-11-21 06:46:17,275 [keyring.backend  :154 ][INFO    ][29007] Loading Gnome
2019-11-21 06:46:17,279 [keyring.backend  :154 ][INFO    ][29007] Loading keyczar
2019-11-21 06:46:17,279 [keyring.backend  :154 ][INFO    ][29007] Loading file
2019-11-21 06:46:17,280 [keyring.backend  :154 ][INFO    ][29007] Loading kwallet
2019-11-21 06:46:18,207 [salt.state       :1780][INFO    ][29007] Running state [ceilometer-agent-central] at time 06:46:18.207136
2019-11-21 06:46:18,207 [salt.state       :1813][INFO    ][29007] Executing state pkg.installed for [ceilometer-agent-central]
2019-11-21 06:46:18,208 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:46:18,676 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2019-11-21 06:46:18,756 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:46:20,903 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:46:20,937 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2019-11-21 06:46:24,687 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064624676208
2019-11-21 06:46:24,702 [salt.minion      :1432][INFO    ][29592] Starting a new job with PID 29592
2019-11-21 06:46:24,728 [salt.minion      :1711][INFO    ][29592] Returning information for job: 20191121064624676208
2019-11-21 06:46:34,321 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:46:34,400 [salt.state       :300 ][INFO    ][29007] Made the following changes:
'python-pysnmp4' changed from 'absent' to '4.4.3-1~u16.04+mcp'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'python-pysnmp2' changed from 'absent' to '1'
'python-pysnmp-common' changed from 'absent' to '1'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'python2.7-twisted-core' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'python-ceilometer' changed from 'absent' to '1:11.0.1-1~u16.04+mcp30'
'ceilometer-common' changed from 'absent' to '1:11.0.1-1~u16.04+mcp30'
'python-attr' changed from 'absent' to '15.2.0-1'
'python-pysmi' changed from 'absent' to '0.2.2-2~u16.04+mcp'
'python2.7-twisted' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:11.0.1-1~u16.04+mcp30'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'python-serial' changed from 'absent' to '3.4-4~u16.04+mcp'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'python-pycryptodome' changed from 'absent' to '3.4.7-1.1~u16.04+mcp'
'python-jsonpath-rw-ext' changed from 'absent' to '0.1.9-1'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'

2019-11-21 06:46:34,474 [salt.state       :915 ][INFO    ][29007] Loading fresh modules for state activity
2019-11-21 06:46:34,665 [salt.state       :1951][INFO    ][29007] Completed state [ceilometer-agent-central] at time 06:46:34.665002 duration_in_ms=16457.866
2019-11-21 06:46:34,671 [salt.state       :1780][INFO    ][29007] Running state [python-ceilometerclient] at time 06:46:34.671107
2019-11-21 06:46:34,671 [salt.state       :1813][INFO    ][29007] Executing state pkg.installed for [python-ceilometerclient]
2019-11-21 06:46:35,517 [salt.state       :300 ][INFO    ][29007] All specified packages are already installed
2019-11-21 06:46:35,518 [salt.state       :1951][INFO    ][29007] Completed state [python-ceilometerclient] at time 06:46:35.518388 duration_in_ms=847.28
2019-11-21 06:46:35,518 [salt.state       :1780][INFO    ][29007] Running state [ceilometer-agent-notification] at time 06:46:35.518938
2019-11-21 06:46:35,519 [salt.state       :1813][INFO    ][29007] Executing state pkg.installed for [ceilometer-agent-notification]
2019-11-21 06:46:35,547 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:46:35,588 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2019-11-21 06:46:39,188 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:46:39,245 [salt.state       :300 ][INFO    ][29007] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:11.0.1-1~u16.04+mcp30'

2019-11-21 06:46:39,284 [salt.state       :915 ][INFO    ][29007] Loading fresh modules for state activity
2019-11-21 06:46:39,326 [salt.state       :1951][INFO    ][29007] Completed state [ceilometer-agent-notification] at time 06:46:39.326590 duration_in_ms=3807.651
2019-11-21 06:46:39,329 [salt.state       :1780][INFO    ][29007] Running state [ceilometer_ssl_rabbitmq] at time 06:46:39.329942
2019-11-21 06:46:39,330 [salt.state       :1813][INFO    ][29007] Executing state test.show_notification for [ceilometer_ssl_rabbitmq]
2019-11-21 06:46:39,331 [salt.state       :300 ][INFO    ][29007] Running ceilometer._ssl.rabbitmq
2019-11-21 06:46:39,331 [salt.state       :1951][INFO    ][29007] Completed state [ceilometer_ssl_rabbitmq] at time 06:46:39.331453 duration_in_ms=1.511
2019-11-21 06:46:39,334 [salt.state       :1780][INFO    ][29007] Running state [/etc/ceilometer/ceilometer.conf] at time 06:46:39.334315
2019-11-21 06:46:39,334 [salt.state       :1813][INFO    ][29007] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2019-11-21 06:46:39,365 [salt.fileclient  :1219][INFO    ][29007] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/ceilometer-server.conf.Debian'
2019-11-21 06:46:39,605 [salt.state       :300 ][INFO    ][29007] File changed:
--- 
+++ 
@@ -1,15 +1,330 @@
 [DEFAULT]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: To reduce polling agent load, samples are sent to the
-# notification agent in a batch. To gain higher throughput at the cost of load
-# set this to False. This option is deprecated, to disable batching set
-# batch_size = 0 in the polling group. (boolean value)
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From ceilometer
+#
+
+# To reduce polling agent load, samples are sent to the notification agent in a
+# batch. To gain higher throughput at the cost of load set this to False.
+# (boolean value)
 #batch_polled_samples = true
 
 # Inspector to use for inspecting the hypervisor layer. Known inspectors are
@@ -70,372 +385,6 @@
 # Minimum value: 1
 #max_parallel_requests = 64
 
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
-
 
 [coordination]
 
@@ -529,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -593,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-aekxDm/ceilometer-11.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -666,633 +569,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
-# a lock path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1307,10 +583,6 @@
 # pool with the same partitioning_group_prefix a disjoint subset of pollsters
 # should be loaded. (string value)
 #partitioning_group_prefix = <None>
-
-# Batch size of samples to send to notification agent, Set to 0 to disable
-# (integer value)
-#batch_size = 50
 
 
 [publisher]
@@ -1325,6 +597,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1357,87 +630,114 @@
 #secret_key = <None>
 
 
-[rgw_client]
-
-#
-# From ceilometer
-#
-
-# Whether RGW uses implicit tenants or not. (boolean value)
-#implicit_tenants = false
-
-
 [service_credentials]
 
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://172.16.10.36:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1450,7 +750,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1485,58 +785,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (host address value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25

2019-11-21 06:46:39,618 [salt.state       :1951][INFO    ][29007] Completed state [/etc/ceilometer/ceilometer.conf] at time 06:46:39.618099 duration_in_ms=283.783
2019-11-21 06:46:39,618 [salt.state       :1780][INFO    ][29007] Running state [/etc/default/ceilometer-agent-central] at time 06:46:39.618534
2019-11-21 06:46:39,618 [salt.state       :1813][INFO    ][29007] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2019-11-21 06:46:39,642 [salt.fileclient  :1219][INFO    ][29007] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2019-11-21 06:46:39,666 [salt.state       :300 ][INFO    ][29007] File changed:
New file
2019-11-21 06:46:39,667 [salt.state       :1951][INFO    ][29007] Completed state [/etc/default/ceilometer-agent-central] at time 06:46:39.667106 duration_in_ms=48.572
2019-11-21 06:46:39,667 [salt.state       :1780][INFO    ][29007] Running state [/etc/default/ceilometer-agent-notification] at time 06:46:39.667507
2019-11-21 06:46:39,667 [salt.state       :1813][INFO    ][29007] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2019-11-21 06:46:39,735 [salt.state       :300 ][INFO    ][29007] File changed:
New file
2019-11-21 06:46:39,739 [salt.state       :1951][INFO    ][29007] Completed state [/etc/default/ceilometer-agent-notification] at time 06:46:39.739512 duration_in_ms=72.004
2019-11-21 06:46:39,762 [salt.state       :1780][INFO    ][29007] Running state [python-gnocchiclient] at time 06:46:39.762406
2019-11-21 06:46:39,762 [salt.state       :1813][INFO    ][29007] Executing state pkg.latest for [python-gnocchiclient]
2019-11-21 06:46:39,799 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2019-11-21 06:46:39,912 [salt.state       :300 ][INFO    ][29007] Package python-gnocchiclient is already up-to-date
2019-11-21 06:46:39,912 [salt.state       :1951][INFO    ][29007] Completed state [python-gnocchiclient] at time 06:46:39.912710 duration_in_ms=150.303
2019-11-21 06:46:39,917 [salt.state       :1780][INFO    ][29007] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 06:46:39.917841
2019-11-21 06:46:39,918 [salt.state       :1813][INFO    ][29007] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2019-11-21 06:46:39,952 [salt.fileclient  :1219][INFO    ][29007] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/gnocchi_resources.yaml'
2019-11-21 06:46:40,002 [salt.state       :300 ][INFO    ][29007] File changed:
New file
2019-11-21 06:46:40,003 [salt.state       :1951][INFO    ][29007] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 06:46:40.003135 duration_in_ms=85.294
2019-11-21 06:46:40,005 [salt.state       :1780][INFO    ][29007] Running state [ceilometer-upgrade] at time 06:46:40.005399
2019-11-21 06:46:40,005 [salt.state       :1813][INFO    ][29007] Executing state cmd.run for [ceilometer-upgrade]
2019-11-21 06:46:40,006 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command 'ceilometer-upgrade' in directory '/root'
2019-11-21 06:46:54,895 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064654886061
2019-11-21 06:46:54,910 [salt.minion      :1432][INFO    ][30909] Starting a new job with PID 30909
2019-11-21 06:46:54,927 [salt.minion      :1711][INFO    ][30909] Returning information for job: 20191121064654886061
2019-11-21 06:47:09,157 [salt.state       :300 ][INFO    ][29007] {'pid': 30753, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:47:09,157 [salt.state       :1951][INFO    ][29007] Completed state [ceilometer-upgrade] at time 06:47:09.157810 duration_in_ms=29152.411
2019-11-21 06:47:09,158 [salt.state       :1780][INFO    ][29007] Running state [/etc/ceilometer/pipeline.yaml] at time 06:47:09.158469
2019-11-21 06:47:09,158 [salt.state       :1813][INFO    ][29007] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2019-11-21 06:47:09,223 [salt.fileclient  :1219][INFO    ][29007] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/pipeline.yaml'
2019-11-21 06:47:09,298 [salt.state       :300 ][INFO    ][29007] File changed:
New file
2019-11-21 06:47:09,298 [salt.state       :1951][INFO    ][29007] Completed state [/etc/ceilometer/pipeline.yaml] at time 06:47:09.298808 duration_in_ms=140.338
2019-11-21 06:47:09,299 [salt.state       :1780][INFO    ][29007] Running state [/etc/ceilometer/event_pipeline.yaml] at time 06:47:09.299211
2019-11-21 06:47:09,299 [salt.state       :1813][INFO    ][29007] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2019-11-21 06:47:09,327 [salt.fileclient  :1219][INFO    ][29007] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_pipeline.yaml'
2019-11-21 06:47:09,396 [salt.state       :300 ][INFO    ][29007] File changed:
New file
2019-11-21 06:47:09,396 [salt.state       :1951][INFO    ][29007] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 06:47:09.396389 duration_in_ms=97.177
2019-11-21 06:47:09,396 [salt.state       :1780][INFO    ][29007] Running state [/etc/ceilometer/event_definitions.yaml] at time 06:47:09.396890
2019-11-21 06:47:09,397 [salt.state       :1813][INFO    ][29007] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2019-11-21 06:47:09,419 [salt.fileclient  :1219][INFO    ][29007] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_definitions.yaml'
2019-11-21 06:47:09,434 [salt.state       :300 ][INFO    ][29007] File changed:
New file
2019-11-21 06:47:09,434 [salt.state       :1951][INFO    ][29007] Completed state [/etc/ceilometer/event_definitions.yaml] at time 06:47:09.434594 duration_in_ms=37.704
2019-11-21 06:47:09,435 [salt.state       :1780][INFO    ][29007] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 06:47:09.434987
2019-11-21 06:47:09,435 [salt.state       :1813][INFO    ][29007] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2019-11-21 06:47:09,457 [salt.fileclient  :1219][INFO    ][29007] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/gabbi_pipeline.yaml'
2019-11-21 06:47:09,468 [salt.state       :300 ][INFO    ][29007] File changed:
New file
2019-11-21 06:47:09,469 [salt.state       :1951][INFO    ][29007] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 06:47:09.469277 duration_in_ms=34.29
2019-11-21 06:47:10,055 [salt.state       :1780][INFO    ][29007] Running state [ceilometer-agent-central] at time 06:47:10.055295
2019-11-21 06:47:10,055 [salt.state       :1813][INFO    ][29007] Executing state service.running for [ceilometer-agent-central]
2019-11-21 06:47:10,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2019-11-21 06:47:10,075 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2019-11-21 06:47:10,089 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2019-11-21 06:47:10,103 [salt.state       :300 ][INFO    ][29007] The service ceilometer-agent-central is already running
2019-11-21 06:47:10,103 [salt.state       :1951][INFO    ][29007] Completed state [ceilometer-agent-central] at time 06:47:10.103539 duration_in_ms=48.244
2019-11-21 06:47:10,103 [salt.state       :1780][INFO    ][29007] Running state [ceilometer-agent-central] at time 06:47:10.103810
2019-11-21 06:47:10,104 [salt.state       :1813][INFO    ][29007] Executing state service.mod_watch for [ceilometer-agent-central]
2019-11-21 06:47:10,104 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2019-11-21 06:47:10,118 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2019-11-21 06:47:10,246 [salt.state       :300 ][INFO    ][29007] {'ceilometer-agent-central': True}
2019-11-21 06:47:10,246 [salt.state       :1951][INFO    ][29007] Completed state [ceilometer-agent-central] at time 06:47:10.246723 duration_in_ms=142.913
2019-11-21 06:47:10,247 [salt.state       :1780][INFO    ][29007] Running state [ceilometer-agent-notification] at time 06:47:10.247815
2019-11-21 06:47:10,248 [salt.state       :1813][INFO    ][29007] Executing state service.running for [ceilometer-agent-notification]
2019-11-21 06:47:10,250 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2019-11-21 06:47:10,267 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2019-11-21 06:47:10,289 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2019-11-21 06:47:10,312 [salt.state       :300 ][INFO    ][29007] The service ceilometer-agent-notification is already running
2019-11-21 06:47:10,312 [salt.state       :1951][INFO    ][29007] Completed state [ceilometer-agent-notification] at time 06:47:10.312772 duration_in_ms=64.956
2019-11-21 06:47:10,313 [salt.state       :1780][INFO    ][29007] Running state [ceilometer-agent-notification] at time 06:47:10.313090
2019-11-21 06:47:10,313 [salt.state       :1813][INFO    ][29007] Executing state service.mod_watch for [ceilometer-agent-notification]
2019-11-21 06:47:10,314 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2019-11-21 06:47:10,328 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29007] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2019-11-21 06:47:20,506 [salt.state       :300 ][INFO    ][29007] {'ceilometer-agent-notification': True}
2019-11-21 06:47:20,507 [salt.state       :1951][INFO    ][29007] Completed state [ceilometer-agent-notification] at time 06:47:20.507361 duration_in_ms=10194.271
2019-11-21 06:47:20,518 [salt.minion      :1711][INFO    ][29007] Returning information for job: 20191121064609572175
2019-11-21 06:47:50,586 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls with jid 20191121064750576695
2019-11-21 06:47:50,599 [salt.minion      :1432][INFO    ][31477] Starting a new job with PID 31477
2019-11-21 06:47:56,618 [salt.state       :915 ][INFO    ][31477] Loading fresh modules for state activity
2019-11-21 06:47:57,358 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/init.sls'
2019-11-21 06:47:57,392 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/server/init.sls'
2019-11-21 06:47:57,420 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/server/service.sls'
2019-11-21 06:47:57,527 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/server/plugin.sls'
2019-11-21 06:47:58,425 [keyring.backend  :154 ][INFO    ][31477] Loading Windows (alt)
2019-11-21 06:47:58,428 [keyring.backend  :154 ][INFO    ][31477] Loading pyfs
2019-11-21 06:47:58,429 [keyring.backend  :154 ][INFO    ][31477] Loading multi
2019-11-21 06:47:58,429 [keyring.backend  :154 ][INFO    ][31477] Loading Google
2019-11-21 06:47:58,430 [keyring.backend  :154 ][INFO    ][31477] Loading Gnome
2019-11-21 06:47:58,434 [keyring.backend  :154 ][INFO    ][31477] Loading keyczar
2019-11-21 06:47:58,435 [keyring.backend  :154 ][INFO    ][31477] Loading file
2019-11-21 06:47:58,435 [keyring.backend  :154 ][INFO    ][31477] Loading kwallet
2019-11-21 06:47:59,319 [salt.state       :1780][INFO    ][31477] Running state [apache2] at time 06:47:59.319126
2019-11-21 06:47:59,319 [salt.state       :1813][INFO    ][31477] Executing state pkg.installed for [apache2]
2019-11-21 06:47:59,320 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:47:59,750 [salt.state       :300 ][INFO    ][31477] All specified packages are already installed
2019-11-21 06:47:59,750 [salt.state       :1951][INFO    ][31477] Completed state [apache2] at time 06:47:59.750869 duration_in_ms=431.743
2019-11-21 06:47:59,751 [salt.state       :1780][INFO    ][31477] Running state [openssl] at time 06:47:59.751210
2019-11-21 06:47:59,751 [salt.state       :1813][INFO    ][31477] Executing state pkg.installed for [openssl]
2019-11-21 06:47:59,760 [salt.state       :300 ][INFO    ][31477] All specified packages are already installed
2019-11-21 06:47:59,760 [salt.state       :1951][INFO    ][31477] Completed state [openssl] at time 06:47:59.760948 duration_in_ms=9.738
2019-11-21 06:47:59,761 [salt.state       :1780][INFO    ][31477] Running state [a2enmod ssl] at time 06:47:59.761679
2019-11-21 06:47:59,761 [salt.state       :1813][INFO    ][31477] Executing state cmd.run for [a2enmod ssl]
2019-11-21 06:47:59,762 [salt.state       :300 ][INFO    ][31477] /etc/apache2/mods-enabled/ssl.load exists
2019-11-21 06:47:59,762 [salt.state       :1951][INFO    ][31477] Completed state [a2enmod ssl] at time 06:47:59.762499 duration_in_ms=0.82
2019-11-21 06:47:59,763 [salt.state       :1780][INFO    ][31477] Running state [a2enmod rewrite] at time 06:47:59.763043
2019-11-21 06:47:59,763 [salt.state       :1813][INFO    ][31477] Executing state cmd.run for [a2enmod rewrite]
2019-11-21 06:47:59,763 [salt.state       :300 ][INFO    ][31477] /etc/apache2/mods-enabled/rewrite.load exists
2019-11-21 06:47:59,763 [salt.state       :1951][INFO    ][31477] Completed state [a2enmod rewrite] at time 06:47:59.763795 duration_in_ms=0.751
2019-11-21 06:47:59,764 [salt.state       :1780][INFO    ][31477] Running state [libapache2-mod-wsgi] at time 06:47:59.764345
2019-11-21 06:47:59,764 [salt.state       :1813][INFO    ][31477] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-11-21 06:47:59,773 [salt.state       :300 ][INFO    ][31477] All specified packages are already installed
2019-11-21 06:47:59,773 [salt.state       :1951][INFO    ][31477] Completed state [libapache2-mod-wsgi] at time 06:47:59.773873 duration_in_ms=9.528
2019-11-21 06:47:59,774 [salt.state       :1780][INFO    ][31477] Running state [a2enmod wsgi] at time 06:47:59.774443
2019-11-21 06:47:59,774 [salt.state       :1813][INFO    ][31477] Executing state cmd.run for [a2enmod wsgi]
2019-11-21 06:47:59,775 [salt.state       :300 ][INFO    ][31477] /etc/apache2/mods-enabled/wsgi.load exists
2019-11-21 06:47:59,775 [salt.state       :1951][INFO    ][31477] Completed state [a2enmod wsgi] at time 06:47:59.775218 duration_in_ms=0.774
2019-11-21 06:47:59,775 [salt.state       :1780][INFO    ][31477] Running state [a2enmod status -q] at time 06:47:59.775770
2019-11-21 06:47:59,776 [salt.state       :1813][INFO    ][31477] Executing state cmd.run for [a2enmod status -q]
2019-11-21 06:47:59,776 [salt.state       :300 ][INFO    ][31477] /etc/apache2/mods-enabled/status.load exists
2019-11-21 06:47:59,776 [salt.state       :1951][INFO    ][31477] Completed state [a2enmod status -q] at time 06:47:59.776519 duration_in_ms=0.749
2019-11-21 06:47:59,780 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:47:59.780439
2019-11-21 06:47:59,780 [salt.state       :1813][INFO    ][31477] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-11-21 06:47:59,781 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-11-21 06:47:59,781 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 06:47:59.781277 duration_in_ms=0.838
2019-11-21 06:47:59,781 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:47:59.781498
2019-11-21 06:47:59,781 [salt.state       :1813][INFO    ][31477] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-11-21 06:47:59,782 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-11-21 06:47:59,782 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 06:47:59.782222 duration_in_ms=0.724
2019-11-21 06:47:59,782 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:47:59.782439
2019-11-21 06:47:59,782 [salt.state       :1813][INFO    ][31477] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-11-21 06:47:59,782 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-11-21 06:47:59,783 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 06:47:59.783105 duration_in_ms=0.665
2019-11-21 06:47:59,783 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:47:59.783315
2019-11-21 06:47:59,783 [salt.state       :1813][INFO    ][31477] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-11-21 06:47:59,783 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-11-21 06:47:59,784 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 06:47:59.783988 duration_in_ms=0.673
2019-11-21 06:47:59,786 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 06:47:59.786646
2019-11-21 06:47:59,786 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-11-21 06:47:59,859 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-11-21 06:47:59,860 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 06:47:59.860116 duration_in_ms=73.469
2019-11-21 06:47:59,861 [salt.state       :1780][INFO    ][31477] Running state [a2enmod mpm_event] at time 06:47:59.861265
2019-11-21 06:47:59,861 [salt.state       :1813][INFO    ][31477] Executing state cmd.run for [a2enmod mpm_event]
2019-11-21 06:47:59,861 [salt.state       :300 ][INFO    ][31477] /etc/apache2/mods-enabled/mpm_event.load exists
2019-11-21 06:47:59,862 [salt.state       :1951][INFO    ][31477] Completed state [a2enmod mpm_event] at time 06:47:59.862059 duration_in_ms=0.795
2019-11-21 06:47:59,862 [salt.state       :1780][INFO    ][31477] Running state [apache_server_service_task] at time 06:47:59.862852
2019-11-21 06:47:59,863 [salt.state       :1813][INFO    ][31477] Executing state test.show_notification for [apache_server_service_task]
2019-11-21 06:47:59,863 [salt.state       :300 ][INFO    ][31477] Running apache.server.service
2019-11-21 06:47:59,863 [salt.state       :1951][INFO    ][31477] Completed state [apache_server_service_task] at time 06:47:59.863510 duration_in_ms=0.658
2019-11-21 06:47:59,864 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/ports.conf] at time 06:47:59.864047
2019-11-21 06:47:59,864 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/etc/apache2/ports.conf]
2019-11-21 06:47:59,927 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/ports.conf is in the correct state
2019-11-21 06:47:59,927 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/ports.conf] at time 06:47:59.927201 duration_in_ms=63.153
2019-11-21 06:47:59,927 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/conf-available/security.conf] at time 06:47:59.927762
2019-11-21 06:47:59,928 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-11-21 06:47:59,990 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/conf-available/security.conf is in the correct state
2019-11-21 06:47:59,991 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/conf-available/security.conf] at time 06:47:59.991101 duration_in_ms=63.338
2019-11-21 06:48:00,006 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 06:48:00.006132
2019-11-21 06:48:00,006 [salt.state       :1813][INFO    ][31477] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-11-21 06:48:00,006 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-11-21 06:48:00,006 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 06:48:00.006937 duration_in_ms=0.805
2019-11-21 06:48:00,007 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:48:00.007523
2019-11-21 06:48:00,007 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-11-21 06:48:00,231 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-11-21 06:48:00,231 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 06:48:00.231234 duration_in_ms=223.71
2019-11-21 06:48:00,231 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:48:00.231852
2019-11-21 06:48:00,232 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-11-21 06:48:00,554 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-11-21 06:48:00,554 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 06:48:00.554464 duration_in_ms=322.612
2019-11-21 06:48:00,555 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:48:00.555175
2019-11-21 06:48:00,555 [salt.state       :1813][INFO    ][31477] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-11-21 06:48:00,557 [salt.state       :300 ][INFO    ][31477] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-11-21 06:48:00,557 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 06:48:00.557385 duration_in_ms=2.21
2019-11-21 06:48:00,557 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:48:00.557953
2019-11-21 06:48:00,558 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-11-21 06:48:00,772 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-11-21 06:48:00,773 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 06:48:00.773137 duration_in_ms=215.184
2019-11-21 06:48:00,773 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:48:00.773744
2019-11-21 06:48:00,774 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/etc/apache2/sites-available/wsgi_openstack_web.conf]
2019-11-21 06:48:00,995 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/sites-available/wsgi_openstack_web.conf is in the correct state
2019-11-21 06:48:00,996 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:48:00.996057 duration_in_ms=222.311
2019-11-21 06:48:00,997 [salt.state       :1780][INFO    ][31477] Running state [openstack-dashboard] at time 06:48:00.997764
2019-11-21 06:48:00,998 [salt.state       :1813][INFO    ][31477] Executing state pkg.installed for [openstack-dashboard]
2019-11-21 06:48:01,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['apt-cache', '-q', 'policy', 'openstack-dashboard'] in directory '/root'
2019-11-21 06:48:01,115 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-11-21 06:48:03,322 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:48:03,356 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'openstack-dashboard'] in directory '/root'
2019-11-21 06:48:05,650 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064805632833
2019-11-21 06:48:05,863 [salt.minion      :1432][INFO    ][31988] Starting a new job with PID 31988
2019-11-21 06:48:05,882 [salt.minion      :1711][INFO    ][31988] Returning information for job: 20191121064805632833
2019-11-21 06:48:35,852 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064835841459
2019-11-21 06:48:35,870 [salt.minion      :1432][INFO    ][985] Starting a new job with PID 985
2019-11-21 06:48:35,893 [salt.minion      :1711][INFO    ][985] Returning information for job: 20191121064835841459
2019-11-21 06:49:05,872 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064905856859
2019-11-21 06:49:05,887 [salt.minion      :1432][INFO    ][1220] Starting a new job with PID 1220
2019-11-21 06:49:05,904 [salt.minion      :1711][INFO    ][1220] Returning information for job: 20191121064905856859
2019-11-21 06:49:13,377 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:49:13,450 [salt.state       :300 ][INFO    ][31477] Made the following changes:
'twitter-bootstrap' changed from 'absent' to '1'
'python-xstatic-angular-fileupload' changed from 'absent' to '12.0.4.0+dfsg1-1.1~u16.04+mcp2'
'python-xstatic-roboto-fontface' changed from 'absent' to '0.5.0.0-2~u16.04+mcp2'
'python-pint' changed from 'absent' to '0.6-1ubuntu1'
'python2.7-pymongo' changed from 'absent' to '1'
'python-xstatic' changed from 'absent' to '1.0.0-4'
'python2.7-bson' changed from 'absent' to '1'
'libjs-jquery-tablesorter' changed from 'absent' to '10-2ubuntu2'
'libjs-jsencrypt' changed from 'absent' to '2.3.0+dfsg2-1~u16.04+mcp2'
'python-xstatic-bootstrap-datepicker' changed from 'absent' to '1.3.1.1-1~u16.04+mcp1'
'python-xstatic-angular-schema-form' changed from 'absent' to '0.8.13.0-1.1~u16.04+mcp2'
'libjs-term.js' changed from 'absent' to '0.0.7-1~u16.04+mcp2'
'python-xstatic-tv4' changed from 'absent' to '1.2.7.0-1.1~u16.04+mcp2'
'python-xstatic-objectpath' changed from 'absent' to '1.2.1.0-2.1~u16.04+mcp2'
'python-xstatic-jasmine' changed from 'absent' to '2.4.1.1+fixed1-1~u16.04+mcp1'
'python2.7-django-compressor' changed from 'absent' to '1'
'fonts-font-awesome' changed from 'absent' to '4.7.0~dfsg-3~u16.04+mcp2'
'python-xstatic-angular-lrdragndrop' changed from 'absent' to '1.0.2.2-1'
'python-xstatic-hogan' changed from 'absent' to '2.0.0.2-1'
'python-xstatic-bootswatch' changed from 'absent' to '3.3.7.0-2~u16.04+mcp2'
'python2.7-pymongo-ext' changed from 'absent' to '1'
'python-xstatic-jquery-migrate' changed from 'absent' to '1.2.1.1+dfsg1-1'
'python-xstatic-jquery.quicksearch' changed from 'absent' to '2.0.4.1-1'
'python2.7-django-appconf' changed from 'absent' to '1'
'libjs-bootswatch' changed from 'absent' to '3.3.7+dfsg2-1~u16.04+mcp2'
'python-django' changed from 'absent' to '1:1.11.7-1~u16.04+mcp2'
'libjs-twitter-bootstrap-datepicker' changed from 'absent' to '1.3.1+dfsg1-1'
'python-gridfs' changed from 'absent' to '3.2-1build1'
'python-xstatic-jquery.tablesorter' changed from 'absent' to '2.14.5.1-2.0~u16.04+mcp1'
'openstack-dashboard' changed from 'absent' to '3:14.0.4-1~u16.04+mcp57'
'python2.7-bson-ext' changed from 'absent' to '1'
'libjs-jquery-cookie' changed from 'absent' to '10-2ubuntu2'
'python-xstatic-spin' changed from 'absent' to '1.2.8.0+dfsg1-1'
'libjs-angularjs-smart-table' changed from 'absent' to '1.4.13-1~u16.04+mcp2'
'libjs-jquery-ui' changed from 'absent' to '1.12.1+dfsg-5~u16.04+mcp2'
'python-xstatic-rickshaw' changed from 'absent' to '1.5.0.2-2'
'python-compressor' changed from 'absent' to '1'
'fonts-roboto-fontface' changed from 'absent' to '0.5.0-2~u16.04+mcp2'
'libjs-spin.js' changed from 'absent' to '1.2.8+dfsg2-1'
'python2.7-pathlib' changed from 'absent' to '1'
'libjs-angular-gettext' changed from 'absent' to '2.3.8-2~u16.04+mcp2'
'libjs-d3' changed from 'absent' to '3.5.17-2~u16.04+mcp2'
'python-django-appconf' changed from 'absent' to '1.0.1-4'
'libjs-jquery.quicksearch' changed from 'absent' to '2.0.4-1'
'python-xstatic-smart-table' changed from 'absent' to '1.4.13.2-2~u16.04+mcp1'
'python-xstatic-magic-search' changed from 'absent' to '0.2.5.1-1'
'python-django-horizon' changed from 'absent' to '3:14.0.4-1~u16.04+mcp57'
'python-xstatic-jquery' changed from 'absent' to '1.10.2.1-2~u16.04+mcp2'
'python-pyscss' changed from 'absent' to '1.3.4-5'
'python-xstatic-bootstrap-scss' changed from 'absent' to '3.3.7.1-2~u16.04+mcp3'
'libjs-angularjs' changed from 'absent' to '1.5.10-1.1~u16.04+mcp2'
'python-bson-ext' changed from 'absent' to '3.2-1build1'
'libjs-angular-file-upload' changed from 'absent' to '12.0.4+dfsg1-2.1~u16.04+mcp2'
'python-xstatic-angular-bootstrap' changed from 'absent' to '2.2.0.0-1.1~u16.04+mcp2'
'python-django-compressor' changed from 'absent' to '2.1-1~u16.04+mcp2'
'python-xstatic-angular-gettext' changed from 'absent' to '2.3.8.0-2~u16.04+mcp2'
'python-django-pyscss' changed from 'absent' to '2.0.2-4'
'python-django-common' changed from 'absent' to '1:1.11.7-1~u16.04+mcp2'
'libjs-twitter-bootstrap' changed from 'absent' to '2.0.2+dfsg-9'
'fonts-materialdesignicons-webfont' changed from 'absent' to '1.4.57-1.1~u16.04+mcp2'
'python-xstatic-angular' changed from 'absent' to '1.5.8.0-1.1~u16.04+mcp2'
'python-rcssmin' changed from 'absent' to '1.0.6-1ubuntu1'
'python-xstatic-mdi' changed from 'absent' to '1.4.57.0-1.1~u16.04+mcp2'
'python2.7-gridfs' changed from 'absent' to '1'
'python-django-babel' changed from 'absent' to '0.6.2-1~u16.04+mcp1'
'python-pymongo-ext' changed from 'absent' to '3.2-1build1'
'python-csscompressor' changed from 'absent' to '0.9.4-2'
'python-xstatic-jquery-ui' changed from 'absent' to '1.12.0.1+debian+dfsg3-2~u16.04+mcp2'
'python-pymongo' changed from 'absent' to '3.2-1build1'
'libjs-jquery-metadata' changed from 'absent' to '10-2ubuntu2'
'python-appconf' changed from 'absent' to '1'
'python-bson' changed from 'absent' to '3.2-1build1'
'libjs-rickshaw' changed from 'absent' to '1.5.1.dfsg-1'
'libjs-magic-search' changed from 'absent' to '0.2.5-1'
'python-xstatic-font-awesome' changed from 'absent' to '4.7.0.0-3~u16.04+mcp2'
'python-rjsmin' changed from 'absent' to '1.0.12+dfsg1-2ubuntu1'
'python-xstatic-term.js' changed from 'absent' to '0.0.7.0-2~u16.04+mcp2'
'python-pathlib' changed from 'absent' to '1.0.1-2'
'python-xstatic-jsencrypt' changed from 'absent' to '2.3.1.1-2~u16.04+mcp2'
'libjs-lrdragndrop' changed from 'absent' to '1.0.2-2'
'python-xstatic-d3' changed from 'absent' to '3.5.17.0-2~u16.04+mcp2'

2019-11-21 06:49:13,499 [salt.state       :915 ][INFO    ][31477] Loading fresh modules for state activity
2019-11-21 06:49:13,550 [salt.state       :1951][INFO    ][31477] Completed state [openstack-dashboard] at time 06:49:13.550827 duration_in_ms=72553.062
2019-11-21 06:49:13,558 [salt.state       :1780][INFO    ][31477] Running state [python-lesscpy] at time 06:49:13.558645
2019-11-21 06:49:13,559 [salt.state       :1813][INFO    ][31477] Executing state pkg.installed for [python-lesscpy]
2019-11-21 06:49:14,502 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:49:14,542 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-lesscpy'] in directory '/root'
2019-11-21 06:49:16,881 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:49:16,950 [salt.state       :300 ][INFO    ][31477] Made the following changes:
'python-lesscpy' changed from 'absent' to '0.10-1'

2019-11-21 06:49:16,981 [salt.state       :915 ][INFO    ][31477] Loading fresh modules for state activity
2019-11-21 06:49:17,026 [salt.state       :1951][INFO    ][31477] Completed state [python-lesscpy] at time 06:49:17.026218 duration_in_ms=3467.57
2019-11-21 06:49:17,036 [salt.state       :1780][INFO    ][31477] Running state [gettext-base] at time 06:49:17.036640
2019-11-21 06:49:17,037 [salt.state       :1813][INFO    ][31477] Executing state pkg.installed for [gettext-base]
2019-11-21 06:49:17,888 [salt.state       :300 ][INFO    ][31477] All specified packages are already installed
2019-11-21 06:49:17,889 [salt.state       :1951][INFO    ][31477] Completed state [gettext-base] at time 06:49:17.889230 duration_in_ms=852.589
2019-11-21 06:49:17,889 [salt.state       :1780][INFO    ][31477] Running state [python-pylibmc] at time 06:49:17.889541
2019-11-21 06:49:17,889 [salt.state       :1813][INFO    ][31477] Executing state pkg.installed for [python-pylibmc]
2019-11-21 06:49:17,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-11-21 06:49:17,960 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-pylibmc'] in directory '/root'
2019-11-21 06:49:20,681 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:49:20,743 [salt.state       :300 ][INFO    ][31477] Made the following changes:
'python-pylibmc' changed from 'absent' to '1.5.0-4build1'
'libmemcached11' changed from 'absent' to '1.0.18-4.1ubuntu2'

2019-11-21 06:49:20,785 [salt.state       :915 ][INFO    ][31477] Loading fresh modules for state activity
2019-11-21 06:49:20,842 [salt.state       :1951][INFO    ][31477] Completed state [python-pylibmc] at time 06:49:20.842439 duration_in_ms=2952.897
2019-11-21 06:49:20,855 [salt.state       :1780][INFO    ][31477] Running state [openstack-dashboard] at time 06:49:20.855697
2019-11-21 06:49:20,856 [salt.state       :1813][INFO    ][31477] Executing state apache_conf.disabled for [openstack-dashboard]
2019-11-21 06:49:20,856 [salt.state       :300 ][INFO    ][31477] openstack-dashboard already disabled.
2019-11-21 06:49:20,856 [salt.state       :1951][INFO    ][31477] Completed state [openstack-dashboard] at time 06:49:20.856828 duration_in_ms=1.131
2019-11-21 06:49:20,857 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/conf-available/openstack-dashboard.conf] at time 06:49:20.857738
2019-11-21 06:49:20,858 [salt.state       :1813][INFO    ][31477] Executing state file.absent for [/etc/apache2/conf-available/openstack-dashboard.conf]
2019-11-21 06:49:20,858 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/conf-available/openstack-dashboard.conf is not present
2019-11-21 06:49:20,858 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/conf-available/openstack-dashboard.conf] at time 06:49:20.858856 duration_in_ms=1.118
2019-11-21 06:49:20,859 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:49:20.859663
2019-11-21 06:49:20,859 [salt.state       :1813][INFO    ][31477] Executing state file.exists for [/etc/apache2/sites-available/wsgi_openstack_web.conf]
2019-11-21 06:49:20,860 [salt.state       :300 ][INFO    ][31477] Path /etc/apache2/sites-available/wsgi_openstack_web.conf exists
2019-11-21 06:49:20,860 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/sites-available/wsgi_openstack_web.conf] at time 06:49:20.860387 duration_in_ms=0.724
2019-11-21 06:49:20,861 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:49:20.860981
2019-11-21 06:49:20,861 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-11-21 06:49:21,105 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-11-21 06:49:21,106 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 06:49:21.106080 duration_in_ms=245.098
2019-11-21 06:49:21,106 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:49:21.106747
2019-11-21 06:49:21,107 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-11-21 06:49:21,347 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-11-21 06:49:21,348 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 06:49:21.348522 duration_in_ms=241.775
2019-11-21 06:49:21,937 [salt.state       :1780][INFO    ][31477] Running state [apache2] at time 06:49:21.937613
2019-11-21 06:49:21,938 [salt.state       :1813][INFO    ][31477] Executing state service.running for [apache2]
2019-11-21 06:49:21,939 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-11-21 06:49:21,960 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:49:21,978 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:49:22,000 [salt.state       :300 ][INFO    ][31477] The service apache2 is already running
2019-11-21 06:49:22,001 [salt.state       :1951][INFO    ][31477] Completed state [apache2] at time 06:49:22.001731 duration_in_ms=64.118
2019-11-21 06:49:22,003 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/conf-enabled/security.conf] at time 06:49:22.003917
2019-11-21 06:49:22,004 [salt.state       :1813][INFO    ][31477] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-11-21 06:49:22,010 [salt.state       :300 ][INFO    ][31477] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-11-21 06:49:22,011 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/conf-enabled/security.conf] at time 06:49:22.011056 duration_in_ms=7.14
2019-11-21 06:49:22,011 [salt.state       :1780][INFO    ][31477] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:49:22.011552
2019-11-21 06:49:22,012 [salt.state       :1813][INFO    ][31477] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-11-21 06:49:22,012 [salt.state       :300 ][INFO    ][31477] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-11-21 06:49:22,013 [salt.state       :1951][INFO    ][31477] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 06:49:22.013046 duration_in_ms=1.465
2019-11-21 06:49:22,017 [salt.state       :1780][INFO    ][31477] Running state [openstack-dashboard-apache] at time 06:49:22.017931
2019-11-21 06:49:22,018 [salt.state       :1813][INFO    ][31477] Executing state pkg.purged for [openstack-dashboard-apache]
2019-11-21 06:49:22,230 [salt.state       :300 ][INFO    ][31477] All specified packages are already absent
2019-11-21 06:49:22,231 [salt.state       :1951][INFO    ][31477] Completed state [openstack-dashboard-apache] at time 06:49:22.231216 duration_in_ms=213.284
2019-11-21 06:49:22,232 [salt.state       :1780][INFO    ][31477] Running state [/etc/openstack-dashboard/local_settings.py] at time 06:49:22.232300
2019-11-21 06:49:22,232 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/etc/openstack-dashboard/local_settings.py]
2019-11-21 06:49:22,251 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/local_settings/rocky_settings.py'
2019-11-21 06:49:22,321 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_local_settings.py'
2019-11-21 06:49:22,386 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_horizon_settings.py'
2019-11-21 06:49:22,417 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_keystone_settings.py'
2019-11-21 06:49:22,451 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_nova_settings.py'
2019-11-21 06:49:22,487 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_glance_settings.py'
2019-11-21 06:49:22,533 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_neutron_settings.py'
2019-11-21 06:49:22,554 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_heat_settings.py'
2019-11-21 06:49:22,573 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_cinder_settings.py'
2019-11-21 06:49:22,593 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_websso_settings.py'
2019-11-21 06:49:22,621 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_ssl_settings.py'
2019-11-21 06:49:22,641 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_django_settings.py'
2019-11-21 06:49:22,654 [salt.state       :300 ][INFO    ][31477] File changed:
--- 
+++ 
@@ -1,169 +1,83 @@
-# -*- coding: utf-8 -*-
-
 import os
 
+from django.utils.translation import pgettext_lazy
 from django.utils.translation import ugettext_lazy as _
-
-from horizon.utils import secret_key
-
-from openstack_dashboard.settings import HORIZON_CONFIG
-
-DEBUG = True
-
-# This setting controls whether or not compression is enabled. Disabling
-# compression makes Horizon considerably slower, but makes it much easier
-# to debug JS and CSS changes
-#COMPRESS_ENABLED = not DEBUG
-
-# This setting controls whether compression happens on the fly, or offline
-# with `python manage.py compress`
-# See https://django-compressor.readthedocs.io/en/latest/usage/#offline-compression
-# for more information
-#COMPRESS_OFFLINE = not DEBUG
-
-# WEBROOT is the location relative to Webserver root
-# should end with a slash.
-WEBROOT = '/'
-#LOGIN_URL = WEBROOT + 'auth/login/'
-#LOGOUT_URL = WEBROOT + 'auth/logout/'
-#
-# LOGIN_REDIRECT_URL can be used as an alternative for
-# HORIZON_CONFIG.user_home, if user_home is not set.
-# Do not set it to '/home/', as this will cause circular redirect loop
-#LOGIN_REDIRECT_URL = WEBROOT
-
-# If horizon is running in production (DEBUG is False), set this
-# with the list of host/domain names that the application can serve.
-# For more information see:
-# https://docs.djangoproject.com/en/dev/ref/settings/#allowed-hosts
-ALLOWED_HOSTS = [ 'ctl01', 'localhost', ]
-
-# Set SSL proxy settings:
-# Pass this header from the proxy after terminating the SSL,
-# and don't forget to strip it from the client's request.
-# For more information see:
-# https://docs.djangoproject.com/en/dev/ref/settings/#secure-proxy-ssl-header
-#SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTO', 'https')
-
-# If Horizon is being served through SSL, then uncomment the following two
-# settings to better secure the cookies from security exploits
-#CSRF_COOKIE_SECURE = True
-#SESSION_COOKIE_SECURE = True
-
-# The absolute path to the directory where message files are collected.
-# The message file must have a .json file extension. When the user logins to
-# horizon, the message files collected are processed and displayed to the user.
-#MESSAGES_PATH=None
-
-# Overrides for OpenStack API versions. Use this setting to force the
-# OpenStack dashboard to use a specific API version for a given service API.
-# Versions specified here should be integers or floats, not strings.
-# NOTE: The version should be formatted as it appears in the URL for the
-# service API. For example, The identity service APIs have inconsistent
-# use of the decimal point, so valid options would be 2.0 or 3.
-# Minimum compute version to get the instance locked status is 2.9.
-#OPENSTACK_API_VERSIONS = {
-#    "data-processing": 1.1,
-#    "identity": 3,
-#    "image": 2,
-#    "volume": 2,
-#    "compute": 2,
-#}
-
-# Set this to True if running on a multi-domain model. When this is enabled, it
-# will require the user to enter the Domain name in addition to the username
-# for login.
-#OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = False
-
-# Set this to True if you want available domains displayed as a dropdown menu
-# on the login screen. It is strongly advised NOT to enable this for public
-# clouds, as advertising enabled domains to unauthenticated customers
-# irresponsibly exposes private information. This should only be used for
-# private clouds where the dashboard sits behind a corporate firewall.
-#OPENSTACK_KEYSTONE_DOMAIN_DROPDOWN = False
-
-# If OPENSTACK_KEYSTONE_DOMAIN_DROPDOWN is enabled, this option can be used to
-# set the available domains to choose from. This is a list of pairs whose first
-# value is the domain name and the second is the display name.
-#OPENSTACK_KEYSTONE_DOMAIN_CHOICES = (
-#  ('Default', 'Default'),
-#)
-
-# Overrides the default domain used when running on single-domain model
-# with Keystone V3. All entities will be created in the default domain.
-# NOTE: This value must be the name of the default domain, NOT the ID.
-# Also, you will most likely have a value in the keystone policy file like this
-#    "cloud_admin": "rule:admin_required and domain_id:<your domain id>"
-# This value must be the name of the domain whose ID is specified there.
-#OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = 'Default'
-
-# Set this to True to enable panels that provide the ability for users to
-# manage Identity Providers (IdPs) and establish a set of rules to map
-# federation protocol attributes to Identity API attributes.
-# This extension requires v3.0+ of the Identity API.
-#OPENSTACK_KEYSTONE_FEDERATION_MANAGEMENT = False
-
-# Set Console type:
-# valid options are "AUTO"(default), "VNC", "SPICE", "RDP", "SERIAL", "MKS"
-# or None. Set to None explicitly if you want to deactivate the console.
-#CONSOLE_TYPE = "AUTO"
-
-# Toggle showing the openrc file for Keystone V2.
-# If set to false the link will be removed from the user dropdown menu
-# and the API Access page
-#SHOW_KEYSTONE_V2_RC = True
-
-# If provided, a "Report Bug" link will be displayed in the site header
-# which links to the value of this setting (ideally a URL containing
-# information on how to report issues).
-#HORIZON_CONFIG["bug_url"] = "http://bug-report.example.com"
-
-# Show backdrop element outside the modal, do not close the modal
-# after clicking on backdrop.
-#HORIZON_CONFIG["modal_backdrop"] = "static"
-
-# Specify a regular expression to validate user passwords.
-#HORIZON_CONFIG["password_validator"] = {
-#    "regex": '.*',
-#    "help_text": _("Your password does not meet the requirements."),
-#}
-
-# Turn off browser autocompletion for forms including the login form and
-# the database creation workflow if so desired.
-#HORIZON_CONFIG["password_autocomplete"] = "off"
-
-# Setting this to True will disable the reveal button for password fields,
-# including on the login form.
-#HORIZON_CONFIG["disable_password_reveal"] = False
+from openstack_dashboard import exceptions
+
+HORIZON_CONFIG = {
+    'user_home': 'openstack_dashboard.views.get_user_home',
+    'ajax_queue_limit': 10,
+    'auto_fade_alerts': {
+        'delay': 3000,
+        'fade_duration': 1500,
+        'types': ['alert-success', 'alert-info']
+    },
+    'help_url': "http://docs.openstack.org",
+    'exceptions': {'recoverable': exceptions.RECOVERABLE,
+                   'not_found': exceptions.NOT_FOUND,
+                   'unauthorized': exceptions.UNAUTHORIZED},
+    'modal_backdrop': 'static',
+    'angular_modules': [],
+    'js_files': [],
+    'js_spec_files': [],
+    'disable_password_reveal': True,
+    'password_autocomplete': 'off'
+}
+# 'key', 'label', 'path'
+AVAILABLE_THEMES = [
+    (
+        "default",
+        pgettext_lazy("Default style theme", "Default"),
+        "themes/default"
+    ),
+    (
+        "material",
+        pgettext_lazy("Google's Material Design style theme", "Material"),
+        "themes/material"
+    ),
+]
+
+# The default theme if no cookie is present
+DEFAULT_THEME = 'default'
+
+# Theme Static Directory
+THEME_COLLECTION_DIR = 'themes'
+
+# Theme Cookie Name
+THEME_COOKIE_NAME = 'theme'
+
+INSTALLED_APPS = (
+    'openstack_dashboard',
+    'django.contrib.contenttypes',
+    'django.contrib.auth',
+    'django.contrib.sessions',
+    'django.contrib.messages',
+    'django.contrib.staticfiles',
+    'django.contrib.humanize',
+    'compressor',
+    'horizon',
+    'openstack_auth',
+)
+
+
+
+DEBUG = False
+
+TEMPLATE_DEBUG = DEBUG
+
+ALLOWED_HOSTS = ['*']
+
+AUTHENTICATION_URLS = ['openstack_auth.urls']
 
 LOCAL_PATH = os.path.dirname(os.path.abspath(__file__))
 
-# Set custom secret key:
-# You can either set it to a specific value or you can let horizon generate a
-# default secret key that is unique on this machine, e.i. regardless of the
-# amount of Python WSGI workers (if used behind Apache+mod_wsgi): However,
-# there may be situations where you would want to set this explicitly, e.g.
-# when multiple dashboard instances are distributed on different machines
-# (usually behind a load-balancer). Either you have to make sure that a session
-# gets all requests routed to the same dashboard instance or you set the same
-# SECRET_KEY for all of them.
-SECRET_KEY = secret_key.generate_or_read_from_file(
-    os.path.join("/","var","lib","openstack-dashboard","secret-key", '.secret_key_store'))
-
-# We recommend you use memcached for development; otherwise after every reload
-# of the django development server, you will have to login again. To use
-# memcached set CACHES to something like
-#CACHES = {
-#    'default': {
-#        'BACKEND': 'django.core.cache.backends.memcached.MemcachedCache',
-#        'LOCATION': '127.0.0.1:11211',
-#    },
-#}
+SECRET_KEY = 'opaesee8Que2yahJoh9fo0eefo1Aeyo6ahyei8zeiboh3aeth5loth7ieNa5xi5e'
 
 CACHES = {
     'default': {
-        'BACKEND': 'django.core.cache.backends.locmem.LocMemCache',
-    },
+        'BACKEND': "django.core.cache.backends.memcached.PyLibMCCache",
+        'LOCATION': "172.16.10.36:11211"
+    }
 }
 
 # Send email to the console by default
@@ -172,86 +86,249 @@
 #EMAIL_BACKEND = 'django.core.mail.backends.dummy.EmailBackend'
 
 # Configure these for your outgoing email host
-#EMAIL_HOST = 'smtp.my-company.com'
-#EMAIL_PORT = 25
-#EMAIL_HOST_USER = 'djangomail'
-#EMAIL_HOST_PASSWORD = 'top-secret!'
+# EMAIL_HOST = 'smtp.my-company.com'
+# EMAIL_PORT = 25
+# EMAIL_HOST_USER = 'djangomail'
+# EMAIL_HOST_PASSWORD = 'top-secret!'
+
+# The number of objects (Swift containers/objects or images) to display
+# on a single page before providing a paging element (a "more" link)
+# to paginate results.
+API_RESULT_LIMIT = 1000
+API_RESULT_PAGE_SIZE = 20
+
+# The timezone of the server. This should correspond with the timezone
+# of your entire OpenStack installation, and hopefully be in UTC.
+TIME_ZONE = "UTC"
+
+COMPRESS_OFFLINE = True
+
+# Trove user and database extension support. By default support for
+# creating users and databases on database instances is turned on.
+# To disable these extensions set the permission here to something
+# unusable such as ["!"].
+# TROVE_ADD_USER_PERMS = []
+# TROVE_ADD_DATABASE_PERMS = []
+
+SITE_BRANDING = 'OpenStack Dashboard'
+SESSION_COOKIE_HTTPONLY = True
+BOOT_ONLY_FROM_VOLUME = True
+
+REST_API_REQUIRED_SETTINGS = ['OPENSTACK_HYPERVISOR_FEATURES',
+                             'LAUNCH_INSTANCE_DEFAULTS',
+                             'OPENSTACK_IMAGE_FORMATS']
+
+
+# Specify a regular expression to validate user passwords.
+# HORIZON_CONFIG["password_validator"] = {
+#     "regex": '.*',
+#     "help_text": _("Your password does not meet the requirements.")
+# }
+
+# Turn off browser autocompletion for the login form if so desired.
+# HORIZON_CONFIG["password_autocomplete"] = "off"
+
+# The Horizon Policy Enforcement engine uses these values to load per service
+# policy rule files. The content of these files should match the files the
+# OpenStack services are using to determine role based access control in the
+# target installation.
+
+SESSION_TIMEOUT = 43200
+SESSION_ENGINE = "django.contrib.sessions.backends.cache"
+DROPDOWN_MAX_ITEMS = 30
+# A dictionary of settings which can be used to provide the default values for
+# properties found in the Launch Instance modal.
+
+# Path to directory containing policy.json files
+POLICY_FILES_PATH = "/usr/share/openstack-dashboard/openstack_dashboard/conf"
+# Map of local copy of service policy files
+POLICY_FILES = {
+    "compute": "nova_policy.json",
+    "network": "neutron_policy.json",
+    "image": "glance_policy.json",
+    "telemetry": "ceilometer_policy.json",
+    "volume": "cinder_policy.json",
+    "orchestration": "heat_policy.json",
+    "identity": "keystone_policy.json",
+}
+
+LOGGING = {
+    'version': 1,
+    # When set to True this will disable all logging except
+    # for loggers specified in this configuration dictionary. Note that
+    # if nothing is specified here and disable_existing_loggers is True,
+    # django.db.backends will still log unless it is disabled explicitly.
+    
+    'disable_existing_loggers': False,
+    'handlers': {
+        'null': {
+            'level': 'DEBUG',
+            'class': 'logging.NullHandler',
+        },
+        'console': {
+            # Set the level to "DEBUG" for verbose output logging.
+            'level': 'INFO',
+            'class': 'logging.StreamHandler',
+        },
+        'file': {
+            'level': 'DEBUG',
+            'class': 'logging.FileHandler',
+            'filename': '/var/log/horizon/horizon.log',
+        },
+    },
+    'loggers': {
+        # Logging from django.db.backends is VERY verbose, send to null
+        # by default.
+        'django.db.backends': {
+            'handlers': ['null'],
+            'propagate': False,
+        },
+        # DEBUG level for django.template starting Pike has some false positive traces, set it to INFO
+        # by default. Caused by bug PROD-17558.
+        'django.template': {
+            'handlers': ['file'],
+            'level': 'INFO',
+            'propagate': True,
+        },
+        'requests': {
+            'handlers': ['null'],
+            'propagate': False,
+        },
+        'horizon': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'openstack_dashboard': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'novaclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'cinderclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'keystoneclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'glanceclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'neutronclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'heatclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'ceilometerclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'troveclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'mistralclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'swiftclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'openstack_auth': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'scss.expression': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'nose.plugins.manager': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'django': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'iso8601': {
+            'handlers': ['null'],
+            'propagate': False,
+        },
+    }
+}
+
+
+# Overrides for OpenStack API versions. Use this setting to force the
+# OpenStack dashboard to use a specfic API version for a given service API.
+# NOTE: The version should be formatted as it appears in the URL for the
+# service API. For example, The identity service APIs have inconsistent
+# use of the decimal point, so valid options would be "2.0" or "3".
+OPENSTACK_API_VERSIONS = {
+    "identity": 3
+}
+# Set this to True if running on multi-domain model. When this is enabled, it
+# will require user to enter the Domain name in addition to username for login.
+# OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = False
+
+# Overrides the default domain used when running on single-domain model
+# with Keystone V3. All entities will be created in the default domain.
+# OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = 'Default'
 
 # For multiple regions uncomment this configuration, and add (endpoint, title).
-#AVAILABLE_REGIONS = [
-#    ('http://cluster1.example.com:5000/v3', 'cluster1'),
-#    ('http://cluster2.example.com:5000/v3', 'cluster2'),
-#]
-
-OPENSTACK_HOST = "127.0.0.1"
+# AVAILABLE_REGIONS = [
+#     ('http://cluster1.example.com:5000/v2.0', 'cluster1'),
+#     ('http://cluster2.example.com:5000/v2.0', 'cluster2'),
+# ]
+
+
+OPENSTACK_HOST = "10.16.0.107"
 OPENSTACK_KEYSTONE_URL = "http://%s:5000/v3" % OPENSTACK_HOST
-OPENSTACK_KEYSTONE_DEFAULT_ROLE = "_member_"
-
-# For setting the default service region on a per-endpoint basis. Note that the
-# default value for this setting is {}, and below is just an example of how it
-# should be specified.
-# A key of '*' is an optional global default if no other key matches.
-#DEFAULT_SERVICE_REGIONS = {
-#    '*': 'RegionOne'
-#    OPENSTACK_KEYSTONE_URL: 'RegionTwo'
-#}
-
-# Enables keystone web single-sign-on if set to True.
-#WEBSSO_ENABLED = False
-
-# Authentication mechanism to be selected as default.
-# The value must be a key from WEBSSO_CHOICES.
-#WEBSSO_INITIAL_CHOICE = "credentials"
-
-# The list of authentication mechanisms which include keystone
-# federation protocols and identity provider/federation protocol
-# mapping keys (WEBSSO_IDP_MAPPING). Current supported protocol
-# IDs are 'saml2' and 'oidc'  which represent SAML 2.0, OpenID
-# Connect respectively.
-# Do not remove the mandatory credentials mechanism.
-# Note: The last two tuples are sample mapping keys to a identity provider
-# and federation protocol combination (WEBSSO_IDP_MAPPING).
-#WEBSSO_CHOICES = (
-#    ("credentials", _("Keystone Credentials")),
-#    ("oidc", _("OpenID Connect")),
-#    ("saml2", _("Security Assertion Markup Language")),
-#    ("acme_oidc", "ACME - OpenID Connect"),
-#    ("acme_saml2", "ACME - SAML2"),
-#)
-
-# A dictionary of specific identity provider and federation protocol
-# combinations. From the selected authentication mechanism, the value
-# will be looked up as keys in the dictionary. If a match is found,
-# it will redirect the user to a identity provider and federation protocol
-# specific WebSSO endpoint in keystone, otherwise it will use the value
-# as the protocol_id when redirecting to the WebSSO by protocol endpoint.
-# NOTE: The value is expected to be a tuple formatted as: (<idp_id>, <protocol_id>).
-#WEBSSO_IDP_MAPPING = {
-#    "acme_oidc": ("acme", "oidc"),
-#    "acme_saml2": ("acme", "saml2"),
-#}
-
-# If set this URL will be used for web single-sign-on authentication
-# instead of OPENSTACK_KEYSTONE_URL. This is needed in the deployment
-# scenarios where network segmentation is used per security requirement.
-# In this case, the controllers are not reachable from public network.
-# Therefore, user's browser will not be able to access OPENSTACK_KEYSTONE_URL
-# if it is set to the internal endpoint.
-#WEBSSO_KEYSTONE_URL = "http://keystone-public.example.com/v3"
-
-# The Keystone Provider drop down uses Keystone to Keystone federation
-# to switch between Keystone service providers.
-# Set display name for Identity Provider (dropdown display name)
-#KEYSTONE_PROVIDER_IDP_NAME = "Local Keystone"
-# This id is used for only for comparison with the service provider IDs. This ID
-# should not match any service provider IDs.
-#KEYSTONE_PROVIDER_IDP_ID = "localkeystone"
+
+OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = False
+OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = "default"
+
+OPENSTACK_KEYSTONE_DEFAULT_ROLE = "Member"
 
 # Disable SSL certificate checks (useful for self-signed certificates):
-#OPENSTACK_SSL_NO_VERIFY = True
 
 # The CA certificate to use to verify SSL connections
-#OPENSTACK_SSL_CACERT = '/path/to/cacert.pem'
+# OPENSTACK_SSL_CACERT = '/path/to/cacert.pem'
+
+# OPENSTACK_ENDPOINT_TYPE specifies the endpoint type to use for the endpoints
+# in the Keystone service catalog. Use this setting when Horizon is running
+# external to the OpenStack environment. The default is 'publicURL'.
+OPENSTACK_ENDPOINT_TYPE = "internalURL"
+
+# SECONDARY_ENDPOINT_TYPE specifies the fallback endpoint type to use in the
+# case that OPENSTACK_ENDPOINT_TYPE is not present in the endpoints
+# in the Keystone service catalog. Use this setting when Horizon is running
+# external to the OpenStack environment. The default is None.  This
+# value should differ from OPENSTACK_ENDPOINT_TYPE if used.
+#SECONDARY_ENDPOINT_TYPE = "publicURL"
 
 # The OPENSTACK_KEYSTONE_BACKEND settings can be used to identify the
 # capabilities of the auth backend for Keystone.
@@ -265,38 +342,13 @@
     'can_edit_group': True,
     'can_edit_project': True,
     'can_edit_domain': True,
-    'can_edit_role': True,
-}
-
-# Setting this to True, will add a new "Retrieve Password" action on instance,
-# allowing Admin session password retrieval/decryption.
-#OPENSTACK_ENABLE_PASSWORD_RETRIEVE = False
-
-# The Launch Instance user experience has been significantly enhanced.
-# You can choose whether to enable the new launch instance experience,
-# the legacy experience, or both. The legacy experience will be removed
-# in a future release, but is available as a temporary backup setting to ensure
-# compatibility with existing deployments. Further development will not be
-# done on the legacy experience. Please report any problems with the new
-# experience via the Launchpad tracking system.
-#
-# Toggle LAUNCH_INSTANCE_LEGACY_ENABLED and LAUNCH_INSTANCE_NG_ENABLED to
-# determine the experience to enable.  Set them both to true to enable
-# both.
-#LAUNCH_INSTANCE_LEGACY_ENABLED = True
-#LAUNCH_INSTANCE_NG_ENABLED = False
-
-# A dictionary of settings which can be used to provide the default values for
-# properties found in the Launch Instance modal.
-#LAUNCH_INSTANCE_DEFAULTS = {
-#    'config_drive': False,
-#    'enable_scheduler_hints': True,
-#    'disable_image': False,
-#    'disable_instance_snapshot': False,
-#    'disable_volume': False,
-#    'disable_volume_snapshot': False,
-#    'create_volume': True,
-#}
+    'can_edit_role': True
+}
+
+
+# Set Console type:
+# valid options would be "AUTO", "VNC" or "SPICE"
+# CONSOLE_TYPE = "AUTO"
 
 # The Xen Hypervisor has the ability to set the mount point for volumes
 # attached to instances (other Hypervisors currently do not). Setting
@@ -305,102 +357,52 @@
 OPENSTACK_HYPERVISOR_FEATURES = {
     'can_set_mount_point': False,
     'can_set_password': False,
-    'requires_keypair': False,
-    'enable_quotas': True
-}
-
-# This settings controls whether IP addresses of servers are retrieved from
-# neutron in the project instance table. Setting this to ``False`` may mitigate
-# a performance issue in the project instance table in large deployments.
-#OPENSTACK_INSTANCE_RETRIEVE_IP_ADDRESSES = True
-
-# The OPENSTACK_CINDER_FEATURES settings can be used to enable optional
-# services provided by cinder that is not exposed by its extension API.
-OPENSTACK_CINDER_FEATURES = {
-    'enable_backup': False,
-}
-
-# The OPENSTACK_NEUTRON_NETWORK settings can be used to enable optional
-# services provided by neutron. Options currently available are load
-# balancer service, security groups, quotas, VPN service.
-OPENSTACK_NEUTRON_NETWORK = {
-    'enable_router': True,
-    'enable_quotas': True,
-    'enable_ipv6': True,
-    'enable_distributed_router': False,
-    'enable_ha_router': False,
-    'enable_fip_topology_check': True,
-
-    # Default dns servers you would like to use when a subnet is
-    # created.  This is only a default, users can still choose a different
-    # list of dns servers when creating a new subnet.
-    # The entries below are examples only, and are not appropriate for
-    # real deployments
-    # 'default_dns_nameservers': ["8.8.8.8", "8.8.4.4", "208.67.222.222"],
-
-    # Set which provider network types are supported. Only the network types
-    # in this list will be available to choose from when creating a network.
-    # Network types include local, flat, vlan, gre, vxlan and geneve.
-    # 'supported_provider_types': ['*'],
-
-    # You can configure available segmentation ID range per network type
-    # in your deployment.
-    # 'segmentation_id_range': {
-    #     'vlan': [1024, 2048],
-    #     'vxlan': [4094, 65536],
-    # },
-
-    # You can define additional provider network types here.
-    # 'extra_provider_types': {
-    #     'awesome_type': {
-    #         'display_name': 'Awesome New Type',
-    #         'require_physical_network': False,
-    #         'require_segmentation_id': True,
-    #     }
-    # },
-
-    # Set which VNIC types are supported for port binding. Only the VNIC
-    # types in this list will be available to choose from when creating a
-    # port.
-    # VNIC types include 'normal', 'direct', 'direct-physical', 'macvtap',
-    # 'baremetal' and 'virtio-forwarder'
-    # Set to empty list or None to disable VNIC type selection.
-    'supported_vnic_types': ['*'],
-
-    # Set list of available physical networks to be selected in the physical
-    # network field on the admin create network modal. If it's set to an empty
-    # list, the field will be a regular input field.
-    # e.g. ['default', 'test']
-    'physical_networks': [],
-
-}
-
-# The OPENSTACK_HEAT_STACK settings can be used to disable password
-# field required while launching the stack.
-OPENSTACK_HEAT_STACK = {
-    'enable_user_pass': True,
-}
+}
+
+# When set, enables the instance action "Retrieve password"
+# allowing password retrieval
+OPENSTACK_ENABLE_PASSWORD_RETRIEVE = False
+
+# When launching an instance, the menu of available flavors is
+# sorted by RAM usage, ascending.  Provide a callback method here
+# (and/or a flag for reverse sort) for the sorted() method if you'd
+# like a different behaviour.  For more info, see
+# http://docs.python.org/2/library/functions.html#sorted
+# CREATE_INSTANCE_FLAVOR_SORT = {
+#     'key': my_awesome_callback_method,
+#     'reverse': False,
+# }
+
+FLAVOR_EXTRA_KEYS = {
+    'flavor_keys': [
+        ('quota:read_bytes_sec', _('Quota: Read bytes')),
+        ('quota:write_bytes_sec', _('Quota: Write bytes')),
+        ('quota:cpu_quota', _('Quota: CPU')),
+        ('quota:cpu_period', _('Quota: CPU period')),
+        ('quota:inbound_average', _('Quota: Inbound average')),
+        ('quota:outbound_average', _('Quota: Outbound average')),
+    ]
+}
+
 
 # The OPENSTACK_IMAGE_BACKEND settings can be used to customize features
 # in the OpenStack Dashboard related to the Image service, such as the list
 # of supported image formats.
-#OPENSTACK_IMAGE_BACKEND = {
-#    'image_formats': [
-#        ('', _('Select format')),
-#        ('aki', _('AKI - Amazon Kernel Image')),
-#        ('ami', _('AMI - Amazon Machine Image')),
-#        ('ari', _('ARI - Amazon Ramdisk Image')),
-#        ('docker', _('Docker')),
-#        ('iso', _('ISO - Optical Disk Image')),
-#        ('ova', _('OVA - Open Virtual Appliance')),
-#        ('qcow2', _('QCOW2 - QEMU Emulator')),
-#        ('raw', _('Raw')),
-#        ('vdi', _('VDI - Virtual Disk Image')),
-#        ('vhd', _('VHD - Virtual Hard Disk')),
-#        ('vhdx', _('VHDX - Large Virtual Hard Disk')),
-#        ('vmdk', _('VMDK - Virtual Machine Disk')),
-#    ],
-#}
+OPENSTACK_IMAGE_BACKEND = {
+    'image_formats': [
+        ('', ''),
+        ('aki', _('AKI - Amazon Kernel Image')),
+        ('ami', _('AMI - Amazon Machine Image')),
+        ('ari', _('ARI - Amazon Ramdisk Image')),
+        ('iso', _('ISO - Optical Disk Image')),
+        ('qcow2', _('QCOW2 - QEMU Emulator')),
+        ('raw', _('Raw')),
+        ('vdi', _('VDI')),
+        ('vhd', _('VHD')),
+        ('vmdk', _('VMDK')),
+        ('docker', _('Docker Container'))
+    ]
+}
 
 # The IMAGE_CUSTOM_PROPERTY_TITLES settings is used to customize the titles for
 # image custom property attributes that appear on image detail pages.
@@ -410,270 +412,54 @@
     "ramdisk_id": _("Ramdisk ID"),
     "image_state": _("Euca2ools state"),
     "project_id": _("Project ID"),
-    "image_type": _("Image Type"),
-}
-
-# The IMAGE_RESERVED_CUSTOM_PROPERTIES setting is used to specify which image
-# custom properties should not be displayed in the Image Custom Properties
-# table.
-IMAGE_RESERVED_CUSTOM_PROPERTIES = []
-
-# Set to 'legacy' or 'direct' to allow users to upload images to glance via
-# Horizon server. When enabled, a file form field will appear on the create
-# image form. If set to 'off', there will be no file form field on the create
-# image form. See documentation for deployment considerations.
-#HORIZON_IMAGES_UPLOAD_MODE = 'legacy'
-
-# Allow a location to be set when creating or updating Glance images.
-# If using Glance V2, this value should be False unless the Glance
-# configuration and policies allow setting locations.
-#IMAGES_ALLOW_LOCATION = False
-
-# A dictionary of default settings for create image modal.
-#CREATE_IMAGE_DEFAULTS = {
-#    'image_visibility': "public",
-#}
-
-# OPENSTACK_ENDPOINT_TYPE specifies the endpoint type to use for the endpoints
-# in the Keystone service catalog. Use this setting when Horizon is running
-# external to the OpenStack environment. The default is 'publicURL'.
-#OPENSTACK_ENDPOINT_TYPE = "publicURL"
-
-# SECONDARY_ENDPOINT_TYPE specifies the fallback endpoint type to use in the
-# case that OPENSTACK_ENDPOINT_TYPE is not present in the endpoints
-# in the Keystone service catalog. Use this setting when Horizon is running
-# external to the OpenStack environment. The default is None. This
-# value should differ from OPENSTACK_ENDPOINT_TYPE if used.
-#SECONDARY_ENDPOINT_TYPE = None
-
-# The number of objects (Swift containers/objects or images) to display
-# on a single page before providing a paging element (a "more" link)
-# to paginate results.
-API_RESULT_LIMIT = 1000
-API_RESULT_PAGE_SIZE = 20
-
-# The size of chunk in bytes for downloading objects from Swift
-SWIFT_FILE_TRANSFER_CHUNK_SIZE = 512 * 1024
-
-# The default number of lines displayed for instance console log.
-INSTANCE_LOG_LENGTH = 35
-
-# Specify a maximum number of items to display in a dropdown.
-DROPDOWN_MAX_ITEMS = 30
-
-# The timezone of the server. This should correspond with the timezone
-# of your entire OpenStack installation, and hopefully be in UTC.
-TIME_ZONE = "UTC"
-
-# When launching an instance, the menu of available flavors is
-# sorted by RAM usage, ascending. If you would like a different sort order,
-# you can provide another flavor attribute as sorting key. Alternatively, you
-# can provide a custom callback method to use for sorting. You can also provide
-# a flag for reverse sort. For more info, see
-# http://docs.python.org/2/library/functions.html#sorted
-#CREATE_INSTANCE_FLAVOR_SORT = {
-#    'key': 'name',
-#     # or
-#    'key': my_awesome_callback_method,
-#    'reverse': False,
-#}
-
-# Set this to True to display an 'Admin Password' field on the Change Password
-# form to verify that it is indeed the admin logged-in who wants to change
-# the password.
-#ENFORCE_PASSWORD_CHECK = False
-
-# Modules that provide /auth routes that can be used to handle different types
-# of user authentication. Add auth plugins that require extra route handling to
-# this list.
-#AUTHENTICATION_URLS = [
-#    'openstack_auth.urls',
-#]
-
-# The Horizon Policy Enforcement engine uses these values to load per service
-# policy rule files. The content of these files should match the files the
-# OpenStack services are using to determine role based access control in the
-# target installation.
-
-# Path to directory containing policy.json files
-#POLICY_FILES_PATH = os.path.join(ROOT_PATH, "conf")
-
-# Map of local copy of service policy files.
-# Please insure that your identity policy file matches the one being used on
-# your keystone servers. There is an alternate policy file that may be used
-# in the Keystone v3 multi-domain case, policy.v3cloudsample.json.
-# This file is not included in the Horizon repository by default but can be
-# found at
-# http://git.openstack.org/cgit/openstack/keystone/tree/etc/ \
-# policy.v3cloudsample.json
-# Having matching policy files on the Horizon and Keystone servers is essential
-# for normal operation. This holds true for all services and their policy files.
-#POLICY_FILES = {
-#    'identity': 'keystone_policy.json',
-#    'compute': 'nova_policy.json',
-#    'volume': 'cinder_policy.json',
-#    'image': 'glance_policy.json',
-#    'network': 'neutron_policy.json',
-#}
-
-# Change this patch to the appropriate list of tuples containing
-# a key, label and static directory containing two files:
-# _variables.scss and _styles.scss
-#AVAILABLE_THEMES = [
-#    ('default', 'Default', 'themes/default'),
-#    ('material', 'Material', 'themes/material'),
-#]
-
-LOGGING = {
-    'version': 1,
-    # When set to True this will disable all logging except
-    # for loggers specified in this configuration dictionary. Note that
-    # if nothing is specified here and disable_existing_loggers is True,
-    # django.db.backends will still log unless it is disabled explicitly.
-    'disable_existing_loggers': False,
-    # If apache2 mod_wsgi is used to deploy OpenStack dashboard
-    # timestamp is output by mod_wsgi. If WSGI framework you use does not
-    # output timestamp for logging, add %(asctime)s in the following
-    # format definitions.
-    'formatters': {
-        'console': {
-            'format': '%(levelname)s %(name)s %(message)s'
-        },
-        'operation': {
-            # The format of "%(message)s" is defined by
-            # OPERATION_LOG_OPTIONS['format']
-            'format': '%(message)s'
-        },
-    },
-    'handlers': {
-        'null': {
-            'level': 'DEBUG',
-            'class': 'logging.NullHandler',
-        },
-        'console': {
-            # Set the level to "DEBUG" for verbose output logging.
-            'level': 'INFO',
-            'class': 'logging.StreamHandler',
-            'formatter': 'console',
-        },
-        'operation': {
-            'level': 'INFO',
-            'class': 'logging.StreamHandler',
-            'formatter': 'operation',
-        },
-    },
-    'loggers': {
-        'horizon': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'horizon.operation_log': {
-            'handlers': ['operation'],
-            'level': 'INFO',
-            'propagate': False,
-        },
-        'openstack_dashboard': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'novaclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'cinderclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'keystoneauth': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'keystoneclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'glanceclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'neutronclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'swiftclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'oslo_policy': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'openstack_auth': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'django': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        # Logging from django.db.backends is VERY verbose, send to null
-        # by default.
-        'django.db.backends': {
-            'handlers': ['null'],
-            'propagate': False,
-        },
-        'requests': {
-            'handlers': ['null'],
-            'propagate': False,
-        },
-        'urllib3': {
-            'handlers': ['null'],
-            'propagate': False,
-        },
-        'chardet.charsetprober': {
-            'handlers': ['null'],
-            'propagate': False,
-        },
-        'iso8601': {
-            'handlers': ['null'],
-            'propagate': False,
-        },
-        'scss': {
-            'handlers': ['null'],
-            'propagate': False,
-        },
-    },
+    "image_type": _("Image Type")
+}
+# Default
+IMAGES_ALLOW_LOCATION = True
+
+HORIZON_IMAGES_UPLOAD_MODE = "direct"
+
+
+# Disable simplified floating IP address management for deployments with
+# multiple floating IP pools or complex network requirements.
+# HORIZON_CONFIG["simple_ip_management"] = False
+
+# The OPENSTACK_NEUTRON_NETWORK settings can be used to enable optional
+# services provided by neutron. Options currenly available are load
+# balancer service, security groups, quotas, VPN service.
+
+OPENSTACK_NEUTRON_NETWORK = {
+    'enable_lb': True,
+    'enable_firewall': False,
+    'enable_quotas': True,
+    'enable_security_group': True,
+    'enable_vpn': False,
+    # The profile_support option is used to detect if an externa lrouter can be
+    # configured via the dashboard. When using specific plugins the
+    # profile_support can be turned on if needed.
+    'profile_support': None,
+    'enable_fip_topology_check': True,
+
+    #'profile_support': 'cisco',
 }
 
 # 'direction' should not be specified for all_tcp/udp/icmp.
 # It is specified in the form.
 SECURITY_GROUP_RULES = {
     'all_tcp': {
-        'name': _('All TCP'),
+        'name': 'ALL TCP',
         'ip_protocol': 'tcp',
         'from_port': '1',
         'to_port': '65535',
     },
     'all_udp': {
-        'name': _('All UDP'),
+        'name': 'ALL UDP',
         'ip_protocol': 'udp',
         'from_port': '1',
         'to_port': '65535',
     },
     'all_icmp': {
-        'name': _('All ICMP'),
+        'name': 'ALL ICMP',
         'ip_protocol': 'icmp',
         'from_port': '-1',
         'to_port': '-1',
@@ -764,136 +550,13 @@
     },
 }
 
-# Deprecation Notice:
-#
-# The setting FLAVOR_EXTRA_KEYS has been deprecated.
-# Please load extra spec metadata into the Glance Metadata Definition Catalog.
-#
-# The sample quota definitions can be found in:
-# <glance_source>/etc/metadefs/compute-quota.json
-#
-# The metadata definition catalog supports CLI and API:
-#  $glance --os-image-api-version 2 help md-namespace-import
-#  $glance-manage db_load_metadefs <directory_with_definition_files>
-#
-# See Metadata Definitions on:
-# https://docs.openstack.org/glance/latest/user/glancemetadefcatalogapi.html
-
-# The hash algorithm to use for authentication tokens. This must
-# match the hash algorithm that the identity server and the
-# auth_token middleware are using. Allowed values are the
-# algorithms supported by Python's hashlib library.
-#OPENSTACK_TOKEN_HASH_ALGORITHM = 'md5'
-
-# AngularJS requires some settings to be made available to
-# the client side. Some settings are required by in-tree / built-in horizon
-# features. These settings must be added to REST_API_REQUIRED_SETTINGS in the
-# form of ['SETTING_1','SETTING_2'], etc.
-#
-# You may remove settings from this list for security purposes, but do so at
-# the risk of breaking a built-in horizon feature. These settings are required
-# for horizon to function properly. Only remove them if you know what you
-# are doing. These settings may in the future be moved to be defined within
-# the enabled panel configuration.
-# You should not add settings to this list for out of tree extensions.
-# See: https://wiki.openstack.org/wiki/Horizon/RESTAPI
-REST_API_REQUIRED_SETTINGS = ['OPENSTACK_HYPERVISOR_FEATURES',
-                              'LAUNCH_INSTANCE_DEFAULTS',
-                              'OPENSTACK_IMAGE_FORMATS',
-                              'OPENSTACK_KEYSTONE_BACKEND',
-                              'OPENSTACK_KEYSTONE_DEFAULT_DOMAIN',
-                              'CREATE_IMAGE_DEFAULTS',
-                              'ENFORCE_PASSWORD_CHECK']
-
-# Additional settings can be made available to the client side for
-# extensibility by specifying them in REST_API_ADDITIONAL_SETTINGS
-# !! Please use extreme caution as the settings are transferred via HTTP/S
-# and are not encrypted on the browser. This is an experimental API and
-# may be deprecated in the future without notice.
-#REST_API_ADDITIONAL_SETTINGS = []
-
-# DISALLOW_IFRAME_EMBED can be used to prevent Horizon from being embedded
-# within an iframe. Legacy browsers are still vulnerable to a Cross-Frame
-# Scripting (XFS) vulnerability, so this option allows extra security hardening
-# where iframes are not used in deployment. Default setting is True.
-# For more information see:
-# http://tinyurl.com/anticlickjack
-#DISALLOW_IFRAME_EMBED = True
-
-# Help URL can be made available for the client. To provide a help URL, edit the
-# following attribute to the URL of your choice.
-#HORIZON_CONFIG["help_url"] = "http://openstack.mycompany.org"
-
-# Settings for OperationLogMiddleware
-# OPERATION_LOG_ENABLED is flag to use the function to log an operation on
-# Horizon.
-# mask_targets is arrangement for appointing a target to mask.
-# method_targets is arrangement of HTTP method to output log.
-# format is the log contents.
-#OPERATION_LOG_ENABLED = False
-#OPERATION_LOG_OPTIONS = {
-#    'mask_fields': ['password'],
-#    'target_methods': ['POST'],
-#    'ignored_urls': ['/js/', '/static/', '^/api/'],
-#    'format': ("[%(client_ip)s] [%(domain_name)s]"
-#        " [%(domain_id)s] [%(project_name)s]"
-#        " [%(project_id)s] [%(user_name)s] [%(user_id)s] [%(request_scheme)s]"
-#        " [%(referer_url)s] [%(request_url)s] [%(message)s] [%(method)s]"
-#        " [%(http_status)s] [%(param)s]"),
-#}
-
-# The default date range in the Overview panel meters - either <today> minus N
-# days (if the value is integer N), or from the beginning of the current month
-# until today (if set to None). This setting should be used to limit the amount
-# of data fetched by default when rendering the Overview panel.
-#OVERVIEW_DAYS_RANGE = 1
-
-# To allow operators to require users provide a search criteria first
-# before loading any data into the views, set the following dict
-# attributes to True in each one of the panels you want to enable this feature.
-# Follow the convention <dashboard>.<view>
-#FILTER_DATA_FIRST = {
-#    'admin.instances': False,
-#    'admin.images': False,
-#    'admin.networks': False,
-#    'admin.routers': False,
-#    'admin.volumes': False,
-#    'identity.users': False,
-#    'identity.projects': False,
-#    'identity.groups': False,
-#    'identity.roles': False
-#}
-
-# Dict used to restrict user private subnet cidr range.
-# An empty list means that user input will not be restricted
-# for a corresponding IP version. By default, there is
-# no restriction for IPv4 or IPv6. To restrict
-# user private subnet cidr range set ALLOWED_PRIVATE_SUBNET_CIDR
-# to something like
-#ALLOWED_PRIVATE_SUBNET_CIDR = {
-#    'ipv4': ['10.0.0.0/8', '192.168.0.0/16'],
-#    'ipv6': ['fc00::/7']
-#}
-ALLOWED_PRIVATE_SUBNET_CIDR = {'ipv4': [], 'ipv6': []}
-
-# Projects and users can have extra attributes as defined by keystone v3.
-# Horizon has the ability to display these extra attributes via this setting.
-# If you'd like to display extra data in the project or user tables, set the
-# corresponding dict key to the attribute name, followed by the display name.
-# For more information, see horizon's customization
-# (https://docs.openstack.org/horizon/latest/configuration/customizing.html#horizon-customization-module-overrides)
-#PROJECT_TABLE_EXTRA_INFO = {
-#   'phone_num': _('Phone Number'),
-#}
-#USER_TABLE_EXTRA_INFO = {
-#   'phone_num': _('Phone Number'),
-#}
-
-# Password will have an expiration date when using keystone v3 and enabling the
-# feature.
-# This setting allows you to set the number of days that the user will be alerted
-# prior to the password expiration.
-# Once the password expires keystone will deny the access and users must
-# contact an admin to change their password.
-#PASSWORD_EXPIRES_WARNING_THRESHOLD_DAYS = 0
-COMPRESS_OFFLINE=True
+
+
+
+
+
+
+
+
+
+FILE_UPLOAD_TEMP_DIR = '/var/tmp/'

2019-11-21 06:49:22,715 [salt.state       :915 ][INFO    ][31477] Loading fresh modules for state activity
2019-11-21 06:49:22,782 [salt.state       :1951][INFO    ][31477] Completed state [/etc/openstack-dashboard/local_settings.py] at time 06:49:22.782196 duration_in_ms=549.895
2019-11-21 06:49:22,789 [salt.state       :1780][INFO    ][31477] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/nova_policy.json] at time 06:49:22.789213
2019-11-21 06:49:22,789 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/usr/share/openstack-dashboard/openstack_dashboard/conf/nova_policy.json]
2019-11-21 06:49:22,824 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/rocky/nova_policy.json'
2019-11-21 06:49:22,828 [salt.state       :300 ][INFO    ][31477] File changed:
--- 
+++ 
@@ -1,174 +1,500 @@
 {
-    "context_is_admin": "role:admin",
-    "admin_or_owner": "is_admin:True or project_id:%(project_id)s",
+    "context_is_admin":  "role:admin",
+    "admin_or_owner":  "is_admin:True or project_id:%(project_id)s",
+    "default": "rule:admin_or_owner",
+
+    "cells_scheduler_filter:TargetCellFilter": "is_admin:True",
+
+    "compute:create": "rule:admin_or_owner",
+    "compute:create:attach_network": "rule:admin_or_owner",
+    "compute:create:attach_volume": "rule:admin_or_owner",
+    "compute:create:forced_host": "is_admin:True",
+
+    "compute:get": "rule:admin_or_owner",
+    "compute:get_all": "rule:admin_or_owner",
+    "compute:get_all_tenants": "is_admin:True",
+
+    "compute:update": "rule:admin_or_owner",
+
+    "compute:get_instance_metadata": "rule:admin_or_owner",
+    "compute:get_all_instance_metadata": "rule:admin_or_owner",
+    "compute:get_all_instance_system_metadata": "rule:admin_or_owner",
+    "compute:update_instance_metadata": "rule:admin_or_owner",
+    "compute:delete_instance_metadata": "rule:admin_or_owner",
+
+    "compute:get_diagnostics": "rule:admin_or_owner",
+    "compute:get_instance_diagnostics": "rule:admin_or_owner",
+
+    "compute:start": "rule:admin_or_owner",
+    "compute:stop": "rule:admin_or_owner",
+
+    "compute:lock": "rule:admin_or_owner",
+    "compute:unlock": "rule:admin_or_owner",
+    "compute:unlock_override": "rule:admin_api",
+
+    "compute:get_vnc_console": "rule:admin_or_owner",
+    "compute:get_spice_console": "rule:admin_or_owner",
+    "compute:get_rdp_console": "rule:admin_or_owner",
+    "compute:get_serial_console": "rule:admin_or_owner",
+    "compute:get_mks_console": "rule:admin_or_owner",
+    "compute:get_console_output": "rule:admin_or_owner",
+
+    "compute:reset_network": "rule:admin_or_owner",
+    "compute:inject_network_info": "rule:admin_or_owner",
+    "compute:add_fixed_ip": "rule:admin_or_owner",
+    "compute:remove_fixed_ip": "rule:admin_or_owner",
+
+    "compute:attach_volume": "rule:admin_or_owner",
+    "compute:detach_volume": "rule:admin_or_owner",
+    "compute:swap_volume": "rule:admin_api",
+
+    "compute:attach_interface": "rule:admin_or_owner",
+    "compute:detach_interface": "rule:admin_or_owner",
+
+    "compute:set_admin_password": "rule:admin_or_owner",
+
+    "compute:rescue": "rule:admin_or_owner",
+    "compute:unrescue": "rule:admin_or_owner",
+
+    "compute:suspend": "rule:admin_or_owner",
+    "compute:resume": "rule:admin_or_owner",
+
+    "compute:pause": "rule:admin_or_owner",
+    "compute:unpause": "rule:admin_or_owner",
+
+    "compute:shelve": "rule:admin_or_owner",
+    "compute:shelve_offload": "rule:admin_or_owner",
+    "compute:unshelve": "rule:admin_or_owner",
+
+    "compute:snapshot": "rule:admin_or_owner",
+    "compute:snapshot_volume_backed": "rule:admin_or_owner",
+    "compute:backup": "rule:admin_or_owner",
+
+    "compute:resize": "rule:admin_or_owner",
+    "compute:confirm_resize": "rule:admin_or_owner",
+    "compute:revert_resize": "rule:admin_or_owner",
+
+    "compute:rebuild": "rule:admin_or_owner",
+    "compute:reboot": "rule:admin_or_owner",
+    "compute:delete": "rule:admin_or_owner",
+    "compute:soft_delete": "rule:admin_or_owner",
+    "compute:force_delete": "rule:admin_or_owner",
+
+    "compute:security_groups:add_to_instance": "rule:admin_or_owner",
+    "compute:security_groups:remove_from_instance": "rule:admin_or_owner",
+
+    "compute:restore": "rule:admin_or_owner",
+
+    "compute:volume_snapshot_create": "rule:admin_or_owner",
+    "compute:volume_snapshot_delete": "rule:admin_or_owner",
+
     "admin_api": "is_admin:True",
-    "os_compute_api:os-admin-actions:reset_state": "rule:admin_api",
-    "os_compute_api:os-admin-actions:inject_network_info": "rule:admin_api",
-    "os_compute_api:os-admin-actions:reset_network": "rule:admin_api",
-    "os_compute_api:os-admin-password": "rule:admin_or_owner",
-    "os_compute_api:os-agents": "rule:admin_api",
-    "os_compute_api:os-aggregates:set_metadata": "rule:admin_api",
-    "os_compute_api:os-aggregates:add_host": "rule:admin_api",
-    "os_compute_api:os-aggregates:create": "rule:admin_api",
-    "os_compute_api:os-aggregates:remove_host": "rule:admin_api",
-    "os_compute_api:os-aggregates:update": "rule:admin_api",
-    "os_compute_api:os-aggregates:index": "rule:admin_api",
-    "os_compute_api:os-aggregates:delete": "rule:admin_api",
-    "os_compute_api:os-aggregates:show": "rule:admin_api",
-    "os_compute_api:os-assisted-volume-snapshots:create": "rule:admin_api",
-    "os_compute_api:os-assisted-volume-snapshots:delete": "rule:admin_api",
-    "os_compute_api:os-attach-interfaces": "rule:admin_or_owner",
-    "os_compute_api:os-attach-interfaces:create": "rule:admin_or_owner",
-    "os_compute_api:os-attach-interfaces:delete": "rule:admin_or_owner",
-    "os_compute_api:os-availability-zone:list": "rule:admin_or_owner",
-    "os_compute_api:os-availability-zone:detail": "rule:admin_api",
-    "os_compute_api:os-baremetal-nodes": "rule:admin_api",
-    "os_compute_api:os-cells:update": "rule:admin_api",
-    "os_compute_api:os-cells:create": "rule:admin_api",
-    "os_compute_api:os-cells": "rule:admin_api",
-    "os_compute_api:os-cells:sync_instances": "rule:admin_api",
-    "os_compute_api:os-cells:delete": "rule:admin_api",
-    "cells_scheduler_filter:DifferentCellFilter": "is_admin:True",
-    "cells_scheduler_filter:TargetCellFilter": "is_admin:True",
-    "os_compute_api:os-config-drive": "rule:admin_or_owner",
-    "os_compute_api:os-console-auth-tokens": "rule:admin_api",
-    "os_compute_api:os-console-output": "rule:admin_or_owner",
-    "os_compute_api:os-consoles:create": "rule:admin_or_owner",
-    "os_compute_api:os-consoles:show": "rule:admin_or_owner",
-    "os_compute_api:os-consoles:delete": "rule:admin_or_owner",
-    "os_compute_api:os-consoles:index": "rule:admin_or_owner",
-    "os_compute_api:os-create-backup": "rule:admin_or_owner",
-    "os_compute_api:os-deferred-delete": "rule:admin_or_owner",
-    "os_compute_api:os-evacuate": "rule:admin_api",
-    "os_compute_api:os-extended-availability-zone": "rule:admin_or_owner",
-    "os_compute_api:os-extended-server-attributes": "rule:admin_api",
-    "os_compute_api:os-extended-status": "rule:admin_or_owner",
-    "os_compute_api:os-extended-volumes": "rule:admin_or_owner",
-    "os_compute_api:extensions": "rule:admin_or_owner",
-    "os_compute_api:os-fixed-ips": "rule:admin_api",
-    "os_compute_api:os-flavor-access:add_tenant_access": "rule:admin_api",
-    "os_compute_api:os-flavor-access:remove_tenant_access": "rule:admin_api",
-    "os_compute_api:os-flavor-access": "rule:admin_or_owner",
-    "os_compute_api:os-flavor-extra-specs:show": "rule:admin_or_owner",
-    "os_compute_api:os-flavor-extra-specs:create": "rule:admin_api",
-    "os_compute_api:os-flavor-extra-specs:update": "rule:admin_api",
-    "os_compute_api:os-flavor-extra-specs:delete": "rule:admin_api",
-    "os_compute_api:os-flavor-extra-specs:index": "rule:admin_or_owner",
-    "os_compute_api:os-flavor-manage": "rule:admin_api",
-    "os_compute_api:os-flavor-manage:create": "rule:os_compute_api:os-flavor-manage",
-    "os_compute_api:os-flavor-manage:update": "rule:admin_api",
-    "os_compute_api:os-flavor-manage:delete": "rule:os_compute_api:os-flavor-manage",
-    "os_compute_api:os-flavor-rxtx": "rule:admin_or_owner",
-    "os_compute_api:flavors": "rule:admin_or_owner",
-    "os_compute_api:os-floating-ip-dns": "rule:admin_or_owner",
-    "os_compute_api:os-floating-ip-dns:domain:update": "rule:admin_api",
-    "os_compute_api:os-floating-ip-dns:domain:delete": "rule:admin_api",
-    "os_compute_api:os-floating-ip-pools": "rule:admin_or_owner",
-    "os_compute_api:os-floating-ips": "rule:admin_or_owner",
-    "os_compute_api:os-floating-ips-bulk": "rule:admin_api",
-    "os_compute_api:os-fping:all_tenants": "rule:admin_api",
-    "os_compute_api:os-fping": "rule:admin_or_owner",
-    "os_compute_api:os-hide-server-addresses": "is_admin:False",
-    "os_compute_api:os-hosts": "rule:admin_api",
-    "os_compute_api:os-hypervisors": "rule:admin_api",
-    "os_compute_api:image-size": "rule:admin_or_owner",
-    "os_compute_api:os-instance-actions:events": "rule:admin_api",
-    "os_compute_api:os-instance-actions": "rule:admin_or_owner",
-    "os_compute_api:os-instance-usage-audit-log": "rule:admin_api",
-    "os_compute_api:ips:show": "rule:admin_or_owner",
-    "os_compute_api:ips:index": "rule:admin_or_owner",
-    "os_compute_api:os-keypairs:index": "rule:admin_api or user_id:%(user_id)s",
-    "os_compute_api:os-keypairs:create": "rule:admin_api or user_id:%(user_id)s",
-    "os_compute_api:os-keypairs:delete": "rule:admin_api or user_id:%(user_id)s",
-    "os_compute_api:os-keypairs:show": "rule:admin_api or user_id:%(user_id)s",
-    "os_compute_api:os-keypairs": "rule:admin_or_owner",
-    "os_compute_api:limits": "rule:admin_or_owner",
-    "os_compute_api:os-lock-server:lock": "rule:admin_or_owner",
-    "os_compute_api:os-lock-server:unlock": "rule:admin_or_owner",
-    "os_compute_api:os-lock-server:unlock:unlock_override": "rule:admin_api",
-    "os_compute_api:os-migrate-server:migrate": "rule:admin_api",
-    "os_compute_api:os-migrate-server:migrate_live": "rule:admin_api",
-    "os_compute_api:os-migrations:index": "rule:admin_api",
-    "os_compute_api:os-multinic": "rule:admin_or_owner",
-    "os_compute_api:os-networks": "rule:admin_api",
-    "os_compute_api:os-networks:view": "rule:admin_or_owner",
-    "os_compute_api:os-networks-associate": "rule:admin_api",
-    "os_compute_api:os-pause-server:pause": "rule:admin_or_owner",
-    "os_compute_api:os-pause-server:unpause": "rule:admin_or_owner",
-    "os_compute_api:os-quota-class-sets:show": "is_admin:True or quota_class:%(quota_class)s",
-    "os_compute_api:os-quota-class-sets:update": "rule:admin_api",
-    "os_compute_api:os-quota-sets:update": "rule:admin_api",
-    "os_compute_api:os-quota-sets:defaults": "@",
-    "os_compute_api:os-quota-sets:show": "rule:admin_or_owner",
-    "os_compute_api:os-quota-sets:delete": "rule:admin_api",
-    "os_compute_api:os-quota-sets:detail": "rule:admin_or_owner",
-    "os_compute_api:os-remote-consoles": "rule:admin_or_owner",
-    "os_compute_api:os-rescue": "rule:admin_or_owner",
-    "os_compute_api:os-security-group-default-rules": "rule:admin_api",
-    "os_compute_api:os-security-groups": "rule:admin_or_owner",
-    "os_compute_api:os-server-diagnostics": "rule:admin_api",
-    "os_compute_api:os-server-external-events:create": "rule:admin_api",
-    "os_compute_api:os-server-groups": "rule:admin_or_owner",
-    "os_compute_api:os-server-groups:create": "rule:os_compute_api:os-server-groups",
-    "os_compute_api:os-server-groups:delete": "rule:os_compute_api:os-server-groups",
-    "os_compute_api:os-server-groups:index": "rule:os_compute_api:os-server-groups",
-    "os_compute_api:os-server-groups:show": "rule:os_compute_api:os-server-groups",
-    "os_compute_api:server-metadata:index": "rule:admin_or_owner",
-    "os_compute_api:server-metadata:show": "rule:admin_or_owner",
-    "os_compute_api:server-metadata:create": "rule:admin_or_owner",
-    "os_compute_api:server-metadata:update_all": "rule:admin_or_owner",
-    "os_compute_api:server-metadata:update": "rule:admin_or_owner",
-    "os_compute_api:server-metadata:delete": "rule:admin_or_owner",
-    "os_compute_api:os-server-password": "rule:admin_or_owner",
-    "os_compute_api:os-server-tags:delete_all": "rule:admin_or_owner",
-    "os_compute_api:os-server-tags:index": "rule:admin_or_owner",
-    "os_compute_api:os-server-tags:update_all": "rule:admin_or_owner",
-    "os_compute_api:os-server-tags:delete": "rule:admin_or_owner",
-    "os_compute_api:os-server-tags:update": "rule:admin_or_owner",
-    "os_compute_api:os-server-tags:show": "rule:admin_or_owner",
-    "os_compute_api:os-server-usage": "rule:admin_or_owner",
+    "compute_extension:accounts": "rule:admin_api",
+    "compute_extension:admin_actions": "rule:admin_api",
+    "compute_extension:admin_actions:pause": "rule:admin_or_owner",
+    "compute_extension:admin_actions:unpause": "rule:admin_or_owner",
+    "compute_extension:admin_actions:suspend": "rule:admin_or_owner",
+    "compute_extension:admin_actions:resume": "rule:admin_or_owner",
+    "compute_extension:admin_actions:lock": "rule:admin_or_owner",
+    "compute_extension:admin_actions:unlock": "rule:admin_or_owner",
+    "compute_extension:admin_actions:resetNetwork": "rule:admin_api",
+    "compute_extension:admin_actions:injectNetworkInfo": "rule:admin_api",
+    "compute_extension:admin_actions:createBackup": "rule:admin_or_owner",
+    "compute_extension:admin_actions:migrateLive": "rule:admin_api",
+    "compute_extension:admin_actions:resetState": "rule:admin_api",
+    "compute_extension:admin_actions:migrate": "rule:admin_api",
+    "compute_extension:aggregates": "rule:admin_api",
+    "compute_extension:agents": "rule:admin_api",
+    "compute_extension:attach_interfaces": "rule:admin_or_owner",
+    "compute_extension:baremetal_nodes": "rule:admin_api",
+    "compute_extension:cells": "rule:admin_api",
+    "compute_extension:cells:create": "rule:admin_api",
+    "compute_extension:cells:delete": "rule:admin_api",
+    "compute_extension:cells:update": "rule:admin_api",
+    "compute_extension:cells:sync_instances": "rule:admin_api",
+    "compute_extension:certificates": "rule:admin_or_owner",
+    "compute_extension:cloudpipe": "rule:admin_api",
+    "compute_extension:cloudpipe_update": "rule:admin_api",
+    "compute_extension:config_drive": "rule:admin_or_owner",
+    "compute_extension:console_output": "rule:admin_or_owner",
+    "compute_extension:consoles": "rule:admin_or_owner",
+    "compute_extension:createserverext": "rule:admin_or_owner",
+    "compute_extension:deferred_delete": "rule:admin_or_owner",
+    "compute_extension:disk_config": "rule:admin_or_owner",
+    "compute_extension:evacuate": "rule:admin_api",
+    "compute_extension:extended_server_attributes": "rule:admin_api",
+    "compute_extension:extended_status": "rule:admin_or_owner",
+    "compute_extension:extended_availability_zone": "rule:admin_or_owner",
+    "compute_extension:extended_ips": "rule:admin_or_owner",
+    "compute_extension:extended_ips_mac": "rule:admin_or_owner",
+    "compute_extension:extended_vif_net": "rule:admin_or_owner",
+    "compute_extension:extended_volumes": "rule:admin_or_owner",
+    "compute_extension:fixed_ips": "rule:admin_api",
+    "compute_extension:flavor_access": "rule:admin_or_owner",
+    "compute_extension:flavor_access:addTenantAccess": "rule:admin_api",
+    "compute_extension:flavor_access:removeTenantAccess": "rule:admin_api",
+    "compute_extension:flavor_disabled": "rule:admin_or_owner",
+    "compute_extension:flavor_rxtx": "rule:admin_or_owner",
+    "compute_extension:flavor_swap": "rule:admin_or_owner",
+    "compute_extension:flavorextradata": "rule:admin_or_owner",
+    "compute_extension:flavorextraspecs:index": "rule:admin_or_owner",
+    "compute_extension:flavorextraspecs:show": "rule:admin_or_owner",
+    "compute_extension:flavorextraspecs:create": "rule:admin_api",
+    "compute_extension:flavorextraspecs:update": "rule:admin_api",
+    "compute_extension:flavorextraspecs:delete": "rule:admin_api",
+    "compute_extension:flavormanage": "rule:admin_api",
+    "compute_extension:floating_ip_dns": "rule:admin_or_owner",
+    "compute_extension:floating_ip_pools": "rule:admin_or_owner",
+    "compute_extension:floating_ips": "rule:admin_or_owner",
+    "compute_extension:floating_ips_bulk": "rule:admin_api",
+    "compute_extension:fping": "rule:admin_or_owner",
+    "compute_extension:fping:all_tenants": "rule:admin_api",
+    "compute_extension:hide_server_addresses": "is_admin:False",
+    "compute_extension:hosts": "rule:admin_api",
+    "compute_extension:hypervisors": "rule:admin_api",
+    "compute_extension:image_size": "rule:admin_or_owner",
+    "compute_extension:instance_actions": "rule:admin_or_owner",
+    "compute_extension:instance_actions:events": "rule:admin_api",
+    "compute_extension:instance_usage_audit_log": "rule:admin_api",
+    "compute_extension:keypairs": "rule:admin_or_owner",
+    "compute_extension:keypairs:index": "rule:admin_or_owner",
+    "compute_extension:keypairs:show": "rule:admin_or_owner",
+    "compute_extension:keypairs:create": "rule:admin_or_owner",
+    "compute_extension:keypairs:delete": "rule:admin_or_owner",
+    "compute_extension:multinic": "rule:admin_or_owner",
+    "compute_extension:networks": "rule:admin_api",
+    "compute_extension:networks:view": "rule:admin_or_owner",
+    "compute_extension:networks_associate": "rule:admin_api",
+    "compute_extension:os-tenant-networks": "rule:admin_or_owner",
+    "compute_extension:quotas:show": "rule:admin_or_owner",
+    "compute_extension:quotas:update": "rule:admin_api",
+    "compute_extension:quotas:delete": "rule:admin_api",
+    "compute_extension:quota_classes": "rule:admin_or_owner",
+    "compute_extension:rescue": "rule:admin_or_owner",
+    "compute_extension:security_group_default_rules": "rule:admin_api",
+    "compute_extension:security_groups": "rule:admin_or_owner",
+    "compute_extension:server_diagnostics": "rule:admin_api",
+    "compute_extension:server_groups": "rule:admin_or_owner",
+    "compute_extension:server_password": "rule:admin_or_owner",
+    "compute_extension:server_usage": "rule:admin_or_owner",
+    "compute_extension:services": "rule:admin_api",
+    "compute_extension:shelve": "rule:admin_or_owner",
+    "compute_extension:shelveOffload": "rule:admin_api",
+    "compute_extension:simple_tenant_usage:show": "rule:admin_or_owner",
+    "compute_extension:simple_tenant_usage:list": "rule:admin_api",
+    "compute_extension:unshelve": "rule:admin_or_owner",
+    "compute_extension:users": "rule:admin_api",
+    "compute_extension:virtual_interfaces": "rule:admin_or_owner",
+    "compute_extension:virtual_storage_arrays": "rule:admin_or_owner",
+    "compute_extension:volumes": "rule:admin_or_owner",
+    "compute_extension:volume_attachments:index": "rule:admin_or_owner",
+    "compute_extension:volume_attachments:show": "rule:admin_or_owner",
+    "compute_extension:volume_attachments:create": "rule:admin_or_owner",
+    "compute_extension:volume_attachments:update": "rule:admin_api",
+    "compute_extension:volume_attachments:delete": "rule:admin_or_owner",
+    "compute_extension:volumetypes": "rule:admin_or_owner",
+    "compute_extension:availability_zone:list": "rule:admin_or_owner",
+    "compute_extension:availability_zone:detail": "rule:admin_api",
+    "compute_extension:used_limits_for_admin": "rule:admin_api",
+    "compute_extension:migrations:index": "rule:admin_api",
+    "compute_extension:os-assisted-volume-snapshots:create": "rule:admin_api",
+    "compute_extension:os-assisted-volume-snapshots:delete": "rule:admin_api",
+    "compute_extension:console_auth_tokens": "rule:admin_api",
+    "compute_extension:os-server-external-events:create": "rule:admin_api",
+
+    "network:get_all": "rule:admin_or_owner",
+    "network:get": "rule:admin_or_owner",
+    "network:create": "rule:admin_or_owner",
+    "network:delete": "rule:admin_or_owner",
+    "network:associate": "rule:admin_or_owner",
+    "network:disassociate": "rule:admin_or_owner",
+    "network:get_vifs_by_instance": "rule:admin_or_owner",
+    "network:allocate_for_instance": "rule:admin_or_owner",
+    "network:deallocate_for_instance": "rule:admin_or_owner",
+    "network:validate_networks": "rule:admin_or_owner",
+    "network:get_instance_uuids_by_ip_filter": "rule:admin_or_owner",
+    "network:get_instance_id_by_floating_address": "rule:admin_or_owner",
+    "network:setup_networks_on_host": "rule:admin_or_owner",
+    "network:get_backdoor_port": "rule:admin_or_owner",
+
+    "network:get_floating_ip": "rule:admin_or_owner",
+    "network:get_floating_ip_pools": "rule:admin_or_owner",
+    "network:get_floating_ip_by_address": "rule:admin_or_owner",
+    "network:get_floating_ips_by_project": "rule:admin_or_owner",
+    "network:get_floating_ips_by_fixed_address": "rule:admin_or_owner",
+    "network:allocate_floating_ip": "rule:admin_or_owner",
+    "network:associate_floating_ip": "rule:admin_or_owner",
+    "network:disassociate_floating_ip": "rule:admin_or_owner",
+    "network:release_floating_ip": "rule:admin_or_owner",
+    "network:migrate_instance_start": "rule:admin_or_owner",
+    "network:migrate_instance_finish": "rule:admin_or_owner",
+
+    "network:get_fixed_ip": "rule:admin_or_owner",
+    "network:get_fixed_ip_by_address": "rule:admin_or_owner",
+    "network:add_fixed_ip_to_instance": "rule:admin_or_owner",
+    "network:remove_fixed_ip_from_instance": "rule:admin_or_owner",
+    "network:add_network_to_project": "rule:admin_or_owner",
+    "network:get_instance_nw_info": "rule:admin_or_owner",
+
+    "network:get_dns_domains": "rule:admin_or_owner",
+    "network:add_dns_entry": "rule:admin_or_owner",
+    "network:modify_dns_entry": "rule:admin_or_owner",
+    "network:delete_dns_entry": "rule:admin_or_owner",
+    "network:get_dns_entries_by_address": "rule:admin_or_owner",
+    "network:get_dns_entries_by_name": "rule:admin_or_owner",
+    "network:create_private_dns_domain": "rule:admin_or_owner",
+    "network:create_public_dns_domain": "rule:admin_or_owner",
+    "network:delete_dns_domain": "rule:admin_or_owner",
+    "network:attach_external_network": "rule:admin_api",
+    "network:get_vif_by_mac_address": "rule:admin_or_owner",
+
+    "os_compute_api:servers:detail:get_all_tenants": "is_admin:True",
+    "os_compute_api:servers:index:get_all_tenants": "is_admin:True",
+    "os_compute_api:servers:confirm_resize": "rule:admin_or_owner",
+    "os_compute_api:servers:create": "rule:admin_or_owner",
+    "os_compute_api:servers:create:attach_network": "rule:admin_or_owner",
+    "os_compute_api:servers:create:attach_volume": "rule:admin_or_owner",
+    "os_compute_api:servers:create:forced_host": "rule:admin_api",
+    "os_compute_api:servers:delete": "rule:admin_or_owner",
+    "os_compute_api:servers:update": "rule:admin_or_owner",
+    "os_compute_api:servers:detail": "rule:admin_or_owner",
     "os_compute_api:servers:index": "rule:admin_or_owner",
-    "os_compute_api:servers:detail": "rule:admin_or_owner",
-    "os_compute_api:servers:index:get_all_tenants": "rule:admin_api",
-    "os_compute_api:servers:detail:get_all_tenants": "rule:admin_api",
+    "os_compute_api:servers:reboot": "rule:admin_or_owner",
+    "os_compute_api:servers:rebuild": "rule:admin_or_owner",
+    "os_compute_api:servers:resize": "rule:admin_or_owner",
+    "os_compute_api:servers:revert_resize": "rule:admin_or_owner",
     "os_compute_api:servers:show": "rule:admin_or_owner",
     "os_compute_api:servers:show:host_status": "rule:admin_api",
-    "os_compute_api:servers:create": "rule:admin_or_owner",
-    "os_compute_api:servers:create:forced_host": "rule:admin_api",
-    "os_compute_api:servers:create:attach_volume": "rule:admin_or_owner",
-    "os_compute_api:servers:create:attach_network": "rule:admin_or_owner",
-    "network:attach_external_network": "is_admin:True",
-    "os_compute_api:servers:delete": "rule:admin_or_owner",
-    "os_compute_api:servers:update": "rule:admin_or_owner",
-    "os_compute_api:servers:confirm_resize": "rule:admin_or_owner",
-    "os_compute_api:servers:revert_resize": "rule:admin_or_owner",
-    "os_compute_api:servers:reboot": "rule:admin_or_owner",
-    "os_compute_api:servers:resize": "rule:admin_or_owner",
-    "os_compute_api:servers:rebuild": "rule:admin_or_owner",
     "os_compute_api:servers:create_image": "rule:admin_or_owner",
     "os_compute_api:servers:create_image:allow_volume_backed": "rule:admin_or_owner",
     "os_compute_api:servers:start": "rule:admin_or_owner",
     "os_compute_api:servers:stop": "rule:admin_or_owner",
     "os_compute_api:servers:trigger_crash_dump": "rule:admin_or_owner",
-    "os_compute_api:servers:migrations:show": "rule:admin_api",
     "os_compute_api:servers:migrations:force_complete": "rule:admin_api",
     "os_compute_api:servers:migrations:delete": "rule:admin_api",
+    "os_compute_api:servers:discoverable": "@",
     "os_compute_api:servers:migrations:index": "rule:admin_api",
+    "os_compute_api:servers:migrations:show": "rule:admin_api",
+    "os_compute_api:os-access-ips:discoverable": "@",
+    "os_compute_api:os-access-ips": "rule:admin_or_owner",
+    "os_compute_api:os-admin-actions": "rule:admin_api",
+    "os_compute_api:os-admin-actions:discoverable": "@",
+    "os_compute_api:os-admin-actions:reset_network": "rule:admin_api",
+    "os_compute_api:os-admin-actions:inject_network_info": "rule:admin_api",
+    "os_compute_api:os-admin-actions:reset_state": "rule:admin_api",
+    "os_compute_api:os-admin-password": "rule:admin_or_owner",
+    "os_compute_api:os-admin-password:discoverable": "@",
+    "os_compute_api:os-aggregates:discoverable": "@",
+    "os_compute_api:os-aggregates:index": "rule:admin_api",
+    "os_compute_api:os-aggregates:create": "rule:admin_api",
+    "os_compute_api:os-aggregates:show": "rule:admin_api",
+    "os_compute_api:os-aggregates:update": "rule:admin_api",
+    "os_compute_api:os-aggregates:delete": "rule:admin_api",
+    "os_compute_api:os-aggregates:add_host": "rule:admin_api",
+    "os_compute_api:os-aggregates:remove_host": "rule:admin_api",
+    "os_compute_api:os-aggregates:set_metadata": "rule:admin_api",
+    "os_compute_api:os-agents": "rule:admin_api",
+    "os_compute_api:os-agents:discoverable": "@",
+    "os_compute_api:os-attach-interfaces": "rule:admin_or_owner",
+    "os_compute_api:os-attach-interfaces:discoverable": "@",
+    "os_compute_api:os-baremetal-nodes": "rule:admin_api",
+    "os_compute_api:os-baremetal-nodes:discoverable": "@",
+    "os_compute_api:os-block-device-mapping-v1:discoverable": "@",
+    "os_compute_api:os-cells": "rule:admin_api",
+    "os_compute_api:os-cells:create": "rule:admin_api",
+    "os_compute_api:os-cells:delete": "rule:admin_api",
+    "os_compute_api:os-cells:update": "rule:admin_api",
+    "os_compute_api:os-cells:sync_instances": "rule:admin_api",
+    "os_compute_api:os-cells:discoverable": "@",
+    "os_compute_api:os-certificates:create": "rule:admin_or_owner",
+    "os_compute_api:os-certificates:show": "rule:admin_or_owner",
+    "os_compute_api:os-certificates:discoverable": "@",
+    "os_compute_api:os-cloudpipe": "rule:admin_api",
+    "os_compute_api:os-cloudpipe:discoverable": "@",
+    "os_compute_api:os-config-drive": "rule:admin_or_owner",
+    "os_compute_api:os-config-drive:discoverable": "@",
+    "os_compute_api:os-consoles:discoverable": "@",
+    "os_compute_api:os-consoles:create": "rule:admin_or_owner",
+    "os_compute_api:os-consoles:delete": "rule:admin_or_owner",
+    "os_compute_api:os-consoles:index": "rule:admin_or_owner",
+    "os_compute_api:os-consoles:show": "rule:admin_or_owner",
+    "os_compute_api:os-console-output:discoverable": "@",
+    "os_compute_api:os-console-output": "rule:admin_or_owner",
+    "os_compute_api:os-remote-consoles": "rule:admin_or_owner",
+    "os_compute_api:os-remote-consoles:discoverable": "@",
+    "os_compute_api:os-create-backup:discoverable": "@",
+    "os_compute_api:os-create-backup": "rule:admin_or_owner",
+    "os_compute_api:os-deferred-delete": "rule:admin_or_owner",
+    "os_compute_api:os-deferred-delete:discoverable": "@",
+    "os_compute_api:os-disk-config": "rule:admin_or_owner",
+    "os_compute_api:os-disk-config:discoverable": "@",
+    "os_compute_api:os-evacuate": "rule:admin_api",
+    "os_compute_api:os-evacuate:discoverable": "@",
+    "os_compute_api:os-extended-server-attributes": "rule:admin_api",
+    "os_compute_api:os-extended-server-attributes:discoverable": "@",
+    "os_compute_api:os-extended-status": "rule:admin_or_owner",
+    "os_compute_api:os-extended-status:discoverable": "@",
+    "os_compute_api:os-extended-availability-zone": "rule:admin_or_owner",
+    "os_compute_api:os-extended-availability-zone:discoverable": "@",
+    "os_compute_api:extensions": "rule:admin_or_owner",
+    "os_compute_api:extensions:discoverable": "@",
+    "os_compute_api:extension_info:discoverable": "@",
+    "os_compute_api:os-extended-volumes": "rule:admin_or_owner",
+    "os_compute_api:os-extended-volumes:discoverable": "@",
+    "os_compute_api:os-fixed-ips": "rule:admin_api",
+    "os_compute_api:os-fixed-ips:discoverable": "@",
+    "os_compute_api:os-flavor-access": "rule:admin_or_owner",
+    "os_compute_api:os-flavor-access:discoverable": "@",
+    "os_compute_api:os-flavor-access:remove_tenant_access": "rule:admin_api",
+    "os_compute_api:os-flavor-access:add_tenant_access": "rule:admin_api",
+    "os_compute_api:os-flavor-rxtx": "rule:admin_or_owner",
+    "os_compute_api:os-flavor-rxtx:discoverable": "@",
+    "os_compute_api:flavors": "rule:admin_or_owner",
+    "os_compute_api:flavors:discoverable": "@",
+    "os_compute_api:os-flavor-extra-specs:discoverable": "@",
+    "os_compute_api:os-flavor-extra-specs:index": "rule:admin_or_owner",
+    "os_compute_api:os-flavor-extra-specs:show": "rule:admin_or_owner",
+    "os_compute_api:os-flavor-extra-specs:create": "rule:admin_api",
+    "os_compute_api:os-flavor-extra-specs:update": "rule:admin_api",
+    "os_compute_api:os-flavor-extra-specs:delete": "rule:admin_api",
+    "os_compute_api:os-flavor-manage:discoverable": "@",
+    "os_compute_api:os-flavor-manage": "rule:admin_api",
+    "os_compute_api:os-floating-ip-dns": "rule:admin_or_owner",
+    "os_compute_api:os-floating-ip-dns:discoverable": "@",
+    "os_compute_api:os-floating-ip-dns:domain:update": "rule:admin_api",
+    "os_compute_api:os-floating-ip-dns:domain:delete": "rule:admin_api",
+    "os_compute_api:os-floating-ip-pools": "rule:admin_or_owner",
+    "os_compute_api:os-floating-ip-pools:discoverable": "@",
+    "os_compute_api:os-floating-ips": "rule:admin_or_owner",
+    "os_compute_api:os-floating-ips:discoverable": "@",
+    "os_compute_api:os-floating-ips-bulk": "rule:admin_api",
+    "os_compute_api:os-floating-ips-bulk:discoverable": "@",
+    "os_compute_api:os-fping": "rule:admin_or_owner",
+    "os_compute_api:os-fping:discoverable": "@",
+    "os_compute_api:os-fping:all_tenants": "rule:admin_api",
+    "os_compute_api:os-hide-server-addresses": "is_admin:False",
+    "os_compute_api:os-hide-server-addresses:discoverable": "@",
+    "os_compute_api:os-hosts": "rule:admin_api",
+    "os_compute_api:os-hosts:discoverable": "@",
+    "os_compute_api:os-hypervisors": "rule:admin_api",
+    "os_compute_api:os-hypervisors:discoverable": "@",
+    "os_compute_api:images:discoverable": "@",
+    "os_compute_api:image-size": "rule:admin_or_owner",
+    "os_compute_api:image-size:discoverable": "@",
+    "os_compute_api:os-instance-actions": "rule:admin_or_owner",
+    "os_compute_api:os-instance-actions:discoverable": "@",
+    "os_compute_api:os-instance-actions:events": "rule:admin_api",
+    "os_compute_api:os-instance-usage-audit-log": "rule:admin_api",
+    "os_compute_api:os-instance-usage-audit-log:discoverable": "@",
+    "os_compute_api:ips:discoverable": "@",
+    "os_compute_api:ips:index": "rule:admin_or_owner",
+    "os_compute_api:ips:show": "rule:admin_or_owner",
+    "os_compute_api:os-keypairs:discoverable": "@",
+    "os_compute_api:os-keypairs": "rule:admin_or_owner",
+    "os_compute_api:os-keypairs:index": "rule:admin_api or user_id:%(user_id)s",
+    "os_compute_api:os-keypairs:show": "rule:admin_api or user_id:%(user_id)s",
+    "os_compute_api:os-keypairs:create": "rule:admin_api or user_id:%(user_id)s",
+    "os_compute_api:os-keypairs:delete": "rule:admin_api or user_id:%(user_id)s",
+    "os_compute_api:limits:discoverable": "@",
+    "os_compute_api:limits": "rule:admin_or_owner",
+    "os_compute_api:os-lock-server:discoverable": "@",
+    "os_compute_api:os-lock-server:lock": "rule:admin_or_owner",
+    "os_compute_api:os-lock-server:unlock": "rule:admin_or_owner",
+    "os_compute_api:os-lock-server:unlock:unlock_override": "rule:admin_api",
+    "os_compute_api:os-migrate-server:discoverable": "@",
+    "os_compute_api:os-migrate-server:migrate": "rule:admin_api",
+    "os_compute_api:os-migrate-server:migrate_live": "rule:admin_api",
+    "os_compute_api:os-multinic": "rule:admin_or_owner",
+    "os_compute_api:os-multinic:discoverable": "@",
+    "os_compute_api:os-networks": "rule:admin_api",
+    "os_compute_api:os-networks:view": "rule:admin_or_owner",
+    "os_compute_api:os-networks:discoverable": "@",
+    "os_compute_api:os-networks-associate": "rule:admin_api",
+    "os_compute_api:os-networks-associate:discoverable": "@",
+    "os_compute_api:os-pause-server:discoverable": "@",
+    "os_compute_api:os-pause-server:pause": "rule:admin_or_owner",
+    "os_compute_api:os-pause-server:unpause": "rule:admin_or_owner",
+    "os_compute_api:os-pci:pci_servers": "rule:admin_or_owner",
+    "os_compute_api:os-pci:discoverable": "@",
+    "os_compute_api:os-pci:index": "rule:admin_api",
+    "os_compute_api:os-pci:detail": "rule:admin_api",
+    "os_compute_api:os-pci:show": "rule:admin_api",
+    "os_compute_api:os-personality:discoverable": "@",
+    "os_compute_api:os-preserve-ephemeral-rebuild:discoverable": "@",
+    "os_compute_api:os-quota-sets:discoverable": "@",
+    "os_compute_api:os-quota-sets:show": "rule:admin_or_owner",
+    "os_compute_api:os-quota-sets:defaults": "@",
+    "os_compute_api:os-quota-sets:update": "rule:admin_api",
+    "os_compute_api:os-quota-sets:delete": "rule:admin_api",
+    "os_compute_api:os-quota-sets:detail": "rule:admin_api",
+    "os_compute_api:os-quota-class-sets:update": "rule:admin_api",
+    "os_compute_api:os-quota-class-sets:show": "is_admin:True or quota_class:%(quota_class)s",
+    "os_compute_api:os-quota-class-sets:discoverable": "@",
+    "os_compute_api:os-rescue": "rule:admin_or_owner",
+    "os_compute_api:os-rescue:discoverable": "@",
+    "os_compute_api:os-scheduler-hints:discoverable": "@",
+    "os_compute_api:os-security-group-default-rules:discoverable": "@",
+    "os_compute_api:os-security-group-default-rules": "rule:admin_api",
+    "os_compute_api:os-security-groups": "rule:admin_or_owner",
+    "os_compute_api:os-security-groups:discoverable": "@",
+    "os_compute_api:os-server-diagnostics": "rule:admin_api",
+    "os_compute_api:os-server-diagnostics:discoverable": "@",
+    "os_compute_api:os-server-password": "rule:admin_or_owner",
+    "os_compute_api:os-server-password:discoverable": "@",
+    "os_compute_api:os-server-usage": "rule:admin_or_owner",
+    "os_compute_api:os-server-usage:discoverable": "@",
+    "os_compute_api:os-server-groups": "rule:admin_or_owner",
+    "os_compute_api:os-server-groups:discoverable": "@",
+    "os_compute_api:os-server-tags:index": "@",
+    "os_compute_api:os-server-tags:show": "@",
+    "os_compute_api:os-server-tags:update": "@",
+    "os_compute_api:os-server-tags:update_all": "@",
+    "os_compute_api:os-server-tags:delete": "@",
+    "os_compute_api:os-server-tags:delete_all": "@",
     "os_compute_api:os-services": "rule:admin_api",
+    "os_compute_api:os-services:discoverable": "@",
+    "os_compute_api:server-metadata:discoverable": "@",
+    "os_compute_api:server-metadata:index": "rule:admin_or_owner",
+    "os_compute_api:server-metadata:show": "rule:admin_or_owner",
+    "os_compute_api:server-metadata:delete": "rule:admin_or_owner",
+    "os_compute_api:server-metadata:create": "rule:admin_or_owner",
+    "os_compute_api:server-metadata:update": "rule:admin_or_owner",
+    "os_compute_api:server-metadata:update_all": "rule:admin_or_owner",
     "os_compute_api:os-shelve:shelve": "rule:admin_or_owner",
-    "os_compute_api:os-shelve:unshelve": "rule:admin_or_owner",
+    "os_compute_api:os-shelve:shelve:discoverable": "@",
     "os_compute_api:os-shelve:shelve_offload": "rule:admin_api",
+    "os_compute_api:os-simple-tenant-usage:discoverable": "@",
     "os_compute_api:os-simple-tenant-usage:show": "rule:admin_or_owner",
     "os_compute_api:os-simple-tenant-usage:list": "rule:admin_api",
+    "os_compute_api:os-suspend-server:discoverable": "@",
+    "os_compute_api:os-suspend-server:suspend": "rule:admin_or_owner",
     "os_compute_api:os-suspend-server:resume": "rule:admin_or_owner",
-    "os_compute_api:os-suspend-server:suspend": "rule:admin_or_owner",
     "os_compute_api:os-tenant-networks": "rule:admin_or_owner",
+    "os_compute_api:os-tenant-networks:discoverable": "@",
+    "os_compute_api:os-shelve:unshelve": "rule:admin_or_owner",
+    "os_compute_api:os-user-data:discoverable": "@",
+    "os_compute_api:os-virtual-interfaces": "rule:admin_or_owner",
+    "os_compute_api:os-virtual-interfaces:discoverable": "@",
+    "os_compute_api:os-volumes": "rule:admin_or_owner",
+    "os_compute_api:os-volumes:discoverable": "@",
+    "os_compute_api:os-volumes-attachments:index": "rule:admin_or_owner",
+    "os_compute_api:os-volumes-attachments:show": "rule:admin_or_owner",
+    "os_compute_api:os-volumes-attachments:create": "rule:admin_or_owner",
+    "os_compute_api:os-volumes-attachments:update": "rule:admin_api",
+    "os_compute_api:os-volumes-attachments:delete": "rule:admin_or_owner",
+    "os_compute_api:os-volumes-attachments:discoverable": "@",
+    "os_compute_api:os-availability-zone:list": "rule:admin_or_owner",
+    "os_compute_api:os-availability-zone:discoverable": "@",
+    "os_compute_api:os-availability-zone:detail": "rule:admin_api",
     "os_compute_api:os-used-limits": "rule:admin_api",
-    "os_compute_api:os-virtual-interfaces": "rule:admin_or_owner",
-    "os_compute_api:os-volumes": "rule:admin_or_owner",
-    "os_compute_api:os-volumes-attachments:index": "rule:admin_or_owner",
-    "os_compute_api:os-volumes-attachments:create": "rule:admin_or_owner",
-    "os_compute_api:os-volumes-attachments:show": "rule:admin_or_owner",
-    "os_compute_api:os-volumes-attachments:update": "rule:admin_api",
-    "os_compute_api:os-volumes-attachments:delete": "rule:admin_or_owner"
+    "os_compute_api:os-used-limits:discoverable": "@",
+    "os_compute_api:os-migrations:index": "rule:admin_api",
+    "os_compute_api:os-migrations:discoverable": "@",
+    "os_compute_api:os-assisted-volume-snapshots:create": "rule:admin_api",
+    "os_compute_api:os-assisted-volume-snapshots:delete": "rule:admin_api",
+    "os_compute_api:os-assisted-volume-snapshots:discoverable": "@",
+    "os_compute_api:os-console-auth-tokens": "rule:admin_api",
+    "os_compute_api:os-console-auth-tokens:discoverable": "@",
+    "os_compute_api:os-server-external-events:create": "rule:admin_api",
+    "os_compute_api:os-server-external-events:discoverable": "@"
 }

2019-11-21 06:49:22,829 [salt.state       :1951][INFO    ][31477] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/nova_policy.json] at time 06:49:22.829485 duration_in_ms=40.272
2019-11-21 06:49:22,830 [salt.state       :1780][INFO    ][31477] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/neutron_policy.json] at time 06:49:22.830549
2019-11-21 06:49:22,831 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/usr/share/openstack-dashboard/openstack_dashboard/conf/neutron_policy.json]
2019-11-21 06:49:22,854 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/rocky/neutron_policy.json'
2019-11-21 06:49:22,858 [salt.state       :300 ][INFO    ][31477] File changed:
--- 
+++ 
@@ -7,8 +7,9 @@
     "admin_owner_or_network_owner": "rule:owner or rule:admin_or_network_owner",
     "admin_only": "rule:context_is_admin",
     "regular_user": "",
-    "admin_or_data_plane_int": "rule:context_is_admin or role:data_plane_integrator",
     "shared": "field:networks:shared=True",
+    "shared_firewalls": "field:firewalls:shared=True",
+    "shared_firewall_policies": "field:firewall_policies:shared=True",
     "shared_subnetpools": "field:subnetpools:shared=True",
     "shared_address_scopes": "field:address_scopes:shared=True",
     "external": "field:networks:router:external=True",
@@ -16,11 +17,9 @@
 
     "create_subnet": "rule:admin_or_network_owner",
     "create_subnet:segment_id": "rule:admin_only",
-    "create_subnet:service_types": "rule:admin_only",
     "get_subnet": "rule:admin_or_owner or rule:shared",
     "get_subnet:segment_id": "rule:admin_only",
     "update_subnet": "rule:admin_or_network_owner",
-    "update_subnet:service_types": "rule:admin_only",
     "delete_subnet": "rule:admin_or_network_owner",
 
     "create_subnetpool": "",
@@ -94,7 +93,6 @@
     "update_port:binding:profile": "rule:admin_only",
     "update_port:mac_learning_enabled": "rule:context_is_advsvc or rule:admin_or_network_owner",
     "update_port:allowed_address_pairs": "rule:admin_or_network_owner",
-    "update_port:data_plane_status": "rule:admin_or_data_plane_int",
     "delete_port": "rule:context_is_advsvc or rule:admin_owner_or_network_owner",
 
     "get_router:ha": "rule:admin_only",
@@ -104,9 +102,6 @@
     "create_router:ha": "rule:admin_only",
     "get_router": "rule:admin_or_owner",
     "get_router:distributed": "rule:admin_only",
-    "update_router": "rule:admin_or_owner",
-    "update_router:external_gateway_info": "rule:admin_or_owner",
-    "update_router:external_gateway_info:network_id": "rule:admin_or_owner",
     "update_router:external_gateway_info:enable_snat": "rule:admin_only",
     "update_router:distributed": "rule:admin_only",
     "update_router:ha": "rule:admin_only",
@@ -117,6 +112,28 @@
 
     "create_router:external_gateway_info:external_fixed_ips": "rule:admin_only",
     "update_router:external_gateway_info:external_fixed_ips": "rule:admin_only",
+
+    "create_firewall": "",
+    "get_firewall": "rule:admin_or_owner",
+    "create_firewall:shared": "rule:admin_only",
+    "get_firewall:shared": "rule:admin_only",
+    "update_firewall": "rule:admin_or_owner",
+    "update_firewall:shared": "rule:admin_only",
+    "delete_firewall": "rule:admin_or_owner",
+
+    "create_firewall_policy": "",
+    "get_firewall_policy": "rule:admin_or_owner or rule:shared_firewall_policies",
+    "create_firewall_policy:shared": "rule:admin_or_owner",
+    "update_firewall_policy": "rule:admin_or_owner",
+    "delete_firewall_policy": "rule:admin_or_owner",
+
+    "insert_rule": "rule:admin_or_owner",
+    "remove_rule": "rule:admin_or_owner",
+
+    "create_firewall_rule": "",
+    "get_firewall_rule": "rule:admin_or_owner or rule:shared_firewalls",
+    "update_firewall_rule": "rule:admin_or_owner",
+    "delete_firewall_rule": "rule:admin_or_owner",
 
     "create_qos_queue": "rule:admin_only",
     "get_qos_queue": "rule:admin_only",
@@ -189,10 +206,6 @@
     "delete_policy_dscp_marking_rule": "rule:admin_only",
     "update_policy_dscp_marking_rule": "rule:admin_only",
     "get_rule_type": "rule:regular_user",
-    "get_policy_minimum_bandwidth_rule": "rule:regular_user",
-    "create_policy_minimum_bandwidth_rule": "rule:admin_only",
-    "delete_policy_minimum_bandwidth_rule": "rule:admin_only",
-    "update_policy_minimum_bandwidth_rule": "rule:admin_only",
 
     "restrict_wildcard": "(not field:rbac_policy:target_tenant=*) or rule:admin_only",
     "create_rbac_policy": "",
@@ -205,29 +218,5 @@
     "create_flavor_service_profile": "rule:admin_only",
     "delete_flavor_service_profile": "rule:admin_only",
     "get_flavor_service_profile": "rule:regular_user",
-    "get_auto_allocated_topology": "rule:admin_or_owner",
-
-    "create_trunk": "rule:regular_user",
-    "get_trunk": "rule:admin_or_owner",
-    "delete_trunk": "rule:admin_or_owner",
-    "get_subports": "",
-    "add_subports": "rule:admin_or_owner",
-    "remove_subports": "rule:admin_or_owner",
-
-    "get_security_groups": "rule:admin_or_owner",
-    "get_security_group": "rule:admin_or_owner",
-    "create_security_group": "rule:admin_or_owner",
-    "update_security_group": "rule:admin_or_owner",
-    "delete_security_group": "rule:admin_or_owner",
-    "get_security_group_rules": "rule:admin_or_owner",
-    "get_security_group_rule": "rule:admin_or_owner",
-    "create_security_group_rule": "rule:admin_or_owner",
-    "delete_security_group_rule": "rule:admin_or_owner",
-
-    "get_loggable_resources": "rule:admin_only",
-    "create_log": "rule:admin_only",
-    "update_log": "rule:admin_only",
-    "delete_log": "rule:admin_only",
-    "get_logs": "rule:admin_only",
-    "get_log": "rule:admin_only"
+    "get_auto_allocated_topology": "rule:admin_or_owner"
 }

2019-11-21 06:49:22,858 [salt.state       :1951][INFO    ][31477] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/neutron_policy.json] at time 06:49:22.858355 duration_in_ms=27.806
2019-11-21 06:49:22,859 [salt.state       :1780][INFO    ][31477] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/glance_policy.json] at time 06:49:22.859381
2019-11-21 06:49:22,859 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/usr/share/openstack-dashboard/openstack_dashboard/conf/glance_policy.json]
2019-11-21 06:49:22,883 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/rocky/glance_policy.json'
2019-11-21 06:49:22,886 [salt.state       :300 ][INFO    ][31477] File changed:
--- 
+++ 
@@ -8,7 +8,6 @@
     "get_images": "",
     "modify_image": "",
     "publicize_image": "role:admin",
-    "communitize_image": "",
     "copy_from": "",
 
     "download_image": "",
@@ -26,11 +25,10 @@
 
     "manage_image_cache": "role:admin",
 
-    "get_task": "",
-    "get_tasks": "",
-    "add_task": "",
-    "modify_task": "",
-    "tasks_api_access": "role:admin",
+    "get_task": "role:admin",
+    "get_tasks": "role:admin",
+    "add_task": "role:admin",
+    "modify_task": "role:admin",
 
     "deactivate": "",
     "reactivate": "",

2019-11-21 06:49:22,886 [salt.state       :1951][INFO    ][31477] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/glance_policy.json] at time 06:49:22.886517 duration_in_ms=27.136
2019-11-21 06:49:22,887 [salt.state       :1780][INFO    ][31477] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/ceilometer_policy.json] at time 06:49:22.887463
2019-11-21 06:49:22,887 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/usr/share/openstack-dashboard/openstack_dashboard/conf/ceilometer_policy.json]
2019-11-21 06:49:22,913 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/rocky/ceilometer_policy.json'
2019-11-21 06:49:22,914 [salt.state       :300 ][INFO    ][31477] File changed:
New file
2019-11-21 06:49:22,914 [salt.state       :1951][INFO    ][31477] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/ceilometer_policy.json] at time 06:49:22.914770 duration_in_ms=27.307
2019-11-21 06:49:22,915 [salt.state       :1780][INFO    ][31477] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/cinder_policy.json] at time 06:49:22.915789
2019-11-21 06:49:22,916 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/usr/share/openstack-dashboard/openstack_dashboard/conf/cinder_policy.json]
2019-11-21 06:49:22,941 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/rocky/cinder_policy.json'
2019-11-21 06:49:22,943 [salt.state       :300 ][INFO    ][31477] File changed:
--- 
+++ 
@@ -1,136 +1,113 @@
 {
     "context_is_admin": "role:admin",
-    "admin_or_owner": "is_admin:True or (role:admin and is_admin_project:True) or  project_id:%(project_id)s",
-    "admin_api": "is_admin:True or (role:admin and is_admin_project:True)",
-    "volume:attachment_create": "",
-    "volume:attachment_update": "rule:admin_or_owner",
-    "volume:attachment_delete": "rule:admin_or_owner",
-    "message:get_all": "rule:admin_or_owner",
-    "message:get": "rule:admin_or_owner",
-    "message:delete": "rule:admin_or_owner",
-    "clusters:get_all": "rule:admin_api",
-    "clusters:get": "rule:admin_api",
-    "clusters:update": "rule:admin_api",
-    "workers:cleanup": "rule:admin_api",
+    "admin_or_owner":  "is_admin:True or project_id:%(project_id)s",
+    "default": "rule:admin_or_owner",
+
+    "admin_api": "is_admin:True",
+
+    "volume:create": "",
+    "volume:delete": "rule:admin_or_owner",
+    "volume:get": "rule:admin_or_owner",
+    "volume:get_all": "rule:admin_or_owner",
+    "volume:get_volume_metadata": "rule:admin_or_owner",
+    "volume:delete_volume_metadata": "rule:admin_or_owner",
+    "volume:update_volume_metadata": "rule:admin_or_owner",
+    "volume:get_volume_admin_metadata": "rule:admin_api",
+    "volume:update_volume_admin_metadata": "rule:admin_api",
+    "volume:get_snapshot": "rule:admin_or_owner",
+    "volume:get_all_snapshots": "rule:admin_or_owner",
+    "volume:create_snapshot": "rule:admin_or_owner",
+    "volume:delete_snapshot": "rule:admin_or_owner",
+    "volume:update_snapshot": "rule:admin_or_owner",
     "volume:get_snapshot_metadata": "rule:admin_or_owner",
+    "volume:delete_snapshot_metadata": "rule:admin_or_owner",
     "volume:update_snapshot_metadata": "rule:admin_or_owner",
-    "volume:delete_snapshot_metadata": "rule:admin_or_owner",
-    "volume:get_all_snapshots": "rule:admin_or_owner",
-    "volume_extension:extended_snapshot_attributes": "rule:admin_or_owner",
-    "volume:create_snapshot": "rule:admin_or_owner",
-    "volume:get_snapshot": "rule:admin_or_owner",
-    "volume:update_snapshot": "rule:admin_or_owner",
-    "volume:delete_snapshot": "rule:admin_or_owner",
-    "volume_extension:snapshot_admin_actions:reset_status": "rule:admin_api",
-    "snapshot_extension:snapshot_actions:update_snapshot_status": "",
-    "volume_extension:snapshot_admin_actions:force_delete": "rule:admin_api",
-    "snapshot_extension:list_manageable": "rule:admin_api",
-    "snapshot_extension:snapshot_manage": "rule:admin_api",
-    "snapshot_extension:snapshot_unmanage": "rule:admin_api",
-    "backup:get_all": "rule:admin_or_owner",
-    "backup:backup_project_attribute": "rule:admin_api",
-    "backup:create": "",
-    "backup:get": "rule:admin_or_owner",
-    "backup:update": "rule:admin_or_owner",
-    "backup:delete": "rule:admin_or_owner",
-    "backup:restore": "rule:admin_or_owner",
-    "backup:backup-import": "rule:admin_api",
-    "backup:export-import": "rule:admin_api",
-    "volume_extension:backup_admin_actions:reset_status": "rule:admin_api",
-    "volume_extension:backup_admin_actions:force_delete": "rule:admin_api",
-    "group:get_all": "rule:admin_or_owner",
-    "group:create": "",
-    "group:get": "rule:admin_or_owner",
-    "group:update": "rule:admin_or_owner",
-    "group:group_types_manage": "rule:admin_api",
-    "group:access_group_types_specs": "rule:admin_api",
-    "group:group_types_specs": "rule:admin_api",
-    "group:get_all_group_snapshots": "rule:admin_or_owner",
-    "group:create_group_snapshot": "",
-    "group:get_group_snapshot": "rule:admin_or_owner",
-    "group:delete_group_snapshot": "rule:admin_or_owner",
-    "group:update_group_snapshot": "rule:admin_or_owner",
-    "group:reset_group_snapshot_status": "rule:admin_or_owner",
-    "group:delete": "rule:admin_or_owner",
-    "group:reset_status": "rule:admin_api",
-    "group:enable_replication": "rule:admin_or_owner",
-    "group:disable_replication": "rule:admin_or_owner",
-    "group:failover_replication": "rule:admin_or_owner",
-    "group:list_replication_targets": "rule:admin_or_owner",
-    "volume_extension:qos_specs_manage:get_all": "rule:admin_api",
-    "volume_extension:qos_specs_manage:get": "rule:admin_api",
-    "volume_extension:qos_specs_manage:create": "rule:admin_api",
-    "volume_extension:qos_specs_manage:update": "rule:admin_api",
-    "volume_extension:qos_specs_manage:delete": "rule:admin_api",
-    "volume_extension:quota_classes": "rule:admin_api",
-    "volume_extension:quotas:show": "rule:admin_or_owner",
-    "volume_extension:quotas:update": "rule:admin_api",
-    "volume_extension:quotas:delete": "rule:admin_api",
-    "volume_extension:quota_classes:validate_setup_for_nested_quota_use": "rule:admin_api",
-    "volume_extension:capabilities": "rule:admin_api",
-    "volume_extension:services:index": "rule:admin_api",
-    "volume_extension:services:update": "rule:admin_api",
-    "volume:freeze_host": "rule:admin_api",
-    "volume:thaw_host": "rule:admin_api",
-    "volume:failover_host": "rule:admin_api",
-    "scheduler_extension:scheduler_stats:get_pools": "rule:admin_api",
-    "volume_extension:hosts": "rule:admin_api",
-    "limits_extension:used_limits": "rule:admin_or_owner",
-    "volume_extension:list_manageable": "rule:admin_api",
-    "volume_extension:volume_manage": "rule:admin_api",
-    "volume_extension:volume_unmanage": "rule:admin_api",
+    "volume:extend": "rule:admin_or_owner",
+    "volume:update_readonly_flag": "rule:admin_or_owner",
+    "volume:retype": "rule:admin_or_owner",
+    "volume:update": "rule:admin_or_owner",
+
     "volume_extension:types_manage": "rule:admin_api",
-    "volume_extension:volume_type_encryption": "rule:admin_api",
+    "volume_extension:types_extra_specs": "rule:admin_api",
+    "volume_extension:access_types_qos_specs_id": "rule:admin_api",
     "volume_extension:access_types_extra_specs": "rule:admin_api",
-    "volume_extension:access_types_qos_specs_id": "rule:admin_api",
     "volume_extension:volume_type_access": "rule:admin_or_owner",
     "volume_extension:volume_type_access:addProjectAccess": "rule:admin_api",
     "volume_extension:volume_type_access:removeProjectAccess": "rule:admin_api",
-    "volume:extend": "rule:admin_or_owner",
-    "volume:extend_attached_volume": "rule:admin_or_owner",
-    "volume:revert_to_snapshot": "rule:admin_or_owner",
+    "volume_extension:volume_type_encryption": "rule:admin_api",
+    "volume_extension:volume_encryption_metadata": "rule:admin_or_owner",
+    "volume_extension:extended_snapshot_attributes": "rule:admin_or_owner",
+    "volume_extension:volume_image_metadata": "rule:admin_or_owner",
+
+    "volume_extension:quotas:show": "",
+    "volume_extension:quotas:update": "rule:admin_api",
+    "volume_extension:quotas:delete": "rule:admin_api",
+    "volume_extension:quota_classes": "rule:admin_api",
+    "volume_extension:quota_classes:validate_setup_for_nested_quota_use": "rule:admin_api",
+
     "volume_extension:volume_admin_actions:reset_status": "rule:admin_api",
-    "volume:retype": "rule:admin_or_owner",
-    "volume:update_readonly_flag": "rule:admin_or_owner",
+    "volume_extension:snapshot_admin_actions:reset_status": "rule:admin_api",
+    "volume_extension:backup_admin_actions:reset_status": "rule:admin_api",
     "volume_extension:volume_admin_actions:force_delete": "rule:admin_api",
+    "volume_extension:volume_admin_actions:force_detach": "rule:admin_api",
+    "volume_extension:snapshot_admin_actions:force_delete": "rule:admin_api",
+    "volume_extension:backup_admin_actions:force_delete": "rule:admin_api",
+    "volume_extension:volume_admin_actions:migrate_volume": "rule:admin_api",
+    "volume_extension:volume_admin_actions:migrate_volume_completion": "rule:admin_api",
+
     "volume_extension:volume_actions:upload_public": "rule:admin_api",
     "volume_extension:volume_actions:upload_image": "rule:admin_or_owner",
-    "volume_extension:volume_admin_actions:force_detach": "rule:admin_api",
-    "volume_extension:volume_admin_actions:migrate_volume": "rule:admin_api",
-    "volume_extension:volume_admin_actions:migrate_volume_completion": "rule:admin_api",
-    "volume_extension:volume_actions:initialize_connection": "rule:admin_or_owner",
-    "volume_extension:volume_actions:terminate_connection": "rule:admin_or_owner",
-    "volume_extension:volume_actions:roll_detaching": "rule:admin_or_owner",
-    "volume_extension:volume_actions:reserve": "rule:admin_or_owner",
-    "volume_extension:volume_actions:unreserve": "rule:admin_or_owner",
-    "volume_extension:volume_actions:begin_detaching": "rule:admin_or_owner",
-    "volume_extension:volume_actions:attach": "rule:admin_or_owner",
-    "volume_extension:volume_actions:detach": "rule:admin_or_owner",
-    "volume:get_all_transfers": "rule:admin_or_owner",
-    "volume:create_transfer": "rule:admin_or_owner",
-    "volume:get_transfer": "rule:admin_or_owner",
-    "volume:accept_transfer": "",
-    "volume:delete_transfer": "rule:admin_or_owner",
-    "volume:get_volume_metadata": "rule:admin_or_owner",
-    "volume:create_volume_metadata": "rule:admin_or_owner",
-    "volume:update_volume_metadata": "rule:admin_or_owner",
-    "volume:delete_volume_metadata": "rule:admin_or_owner",
-    "volume_extension:volume_image_metadata": "rule:admin_or_owner",
-    "volume:update_volume_admin_metadata": "rule:admin_api",
-    "volume_extension:types_extra_specs:index": "rule:admin_api",
-    "volume_extension:types_extra_specs:create": "rule:admin_api",
-    "volume_extension:types_extra_specs:show": "rule:admin_api",
-    "volume_extension:types_extra_specs:update": "rule:admin_api",
-    "volume_extension:types_extra_specs:delete": "rule:admin_api",
-    "volume:create": "",
-    "volume:create_from_image": "",
-    "volume:get": "rule:admin_or_owner",
-    "volume:get_all": "rule:admin_or_owner",
-    "volume:update": "rule:admin_or_owner",
-    "volume:delete": "rule:admin_or_owner",
-    "volume:force_delete": "rule:admin_api",
+
     "volume_extension:volume_host_attribute": "rule:admin_api",
     "volume_extension:volume_tenant_attribute": "rule:admin_or_owner",
     "volume_extension:volume_mig_status_attribute": "rule:admin_api",
-    "volume_extension:volume_encryption_metadata": "rule:admin_or_owner"
+    "volume_extension:hosts": "rule:admin_api",
+    "volume_extension:services:index": "rule:admin_api",
+    "volume_extension:services:update" : "rule:admin_api",
+
+    "volume_extension:volume_manage": "rule:admin_api",
+    "volume_extension:volume_unmanage": "rule:admin_api",
+
+    "volume_extension:capabilities": "rule:admin_api",
+
+    "volume:create_transfer": "rule:admin_or_owner",
+    "volume:accept_transfer": "",
+    "volume:delete_transfer": "rule:admin_or_owner",
+    "volume:get_transfer": "rule:admin_or_owner",
+    "volume:get_all_transfers": "rule:admin_or_owner",
+
+    "volume_extension:replication:promote": "rule:admin_api",
+    "volume_extension:replication:reenable": "rule:admin_api",
+
+    "volume:failover_host": "rule:admin_api",
+    "volume:freeze_host": "rule:admin_api",
+    "volume:thaw_host": "rule:admin_api",
+
+    "backup:create" : "",
+    "backup:delete": "rule:admin_or_owner",
+    "backup:get": "rule:admin_or_owner",
+    "backup:get_all": "rule:admin_or_owner",
+    "backup:restore": "rule:admin_or_owner",
+    "backup:backup-import": "rule:admin_api",
+    "backup:backup-export": "rule:admin_api",
+
+    "snapshot_extension:snapshot_actions:update_snapshot_status": "",
+    "snapshot_extension:snapshot_manage": "rule:admin_api",
+    "snapshot_extension:snapshot_unmanage": "rule:admin_api",
+
+    "consistencygroup:create" : "group:nobody",
+    "consistencygroup:delete": "group:nobody",
+    "consistencygroup:update": "group:nobody",
+    "consistencygroup:get": "group:nobody",
+    "consistencygroup:get_all": "group:nobody",
+
+    "consistencygroup:create_cgsnapshot" : "group:nobody",
+    "consistencygroup:delete_cgsnapshot": "group:nobody",
+    "consistencygroup:get_cgsnapshot": "group:nobody",
+    "consistencygroup:get_all_cgsnapshots": "group:nobody",
+
+    "scheduler_extension:scheduler_stats:get_pools" : "rule:admin_api",
+    "message:delete": "rule:admin_or_owner",
+    "message:get": "rule:admin_or_owner",
+    "message:get_all": "rule:admin_or_owner"
 }

2019-11-21 06:49:22,944 [salt.state       :1951][INFO    ][31477] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/cinder_policy.json] at time 06:49:22.944403 duration_in_ms=28.614
2019-11-21 06:49:22,945 [salt.state       :1780][INFO    ][31477] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/heat_policy.json] at time 06:49:22.945405
2019-11-21 06:49:22,945 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/usr/share/openstack-dashboard/openstack_dashboard/conf/heat_policy.json]
2019-11-21 06:49:22,968 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/rocky/heat_policy.json'
2019-11-21 06:49:22,971 [salt.state       :300 ][INFO    ][31477] File changed:
New file
2019-11-21 06:49:22,971 [salt.state       :1951][INFO    ][31477] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/heat_policy.json] at time 06:49:22.971350 duration_in_ms=25.945
2019-11-21 06:49:22,972 [salt.state       :1780][INFO    ][31477] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/keystone_policy.json] at time 06:49:22.972340
2019-11-21 06:49:22,972 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/usr/share/openstack-dashboard/openstack_dashboard/conf/keystone_policy.json]
2019-11-21 06:49:22,993 [salt.fileclient  :1219][INFO    ][31477] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/rocky/keystone_policy.json'
2019-11-21 06:49:22,995 [salt.state       :300 ][INFO    ][31477] File changed:
--- 
+++ 
@@ -2,50 +2,137 @@
     "admin_required": "role:admin or is_admin:1",
     "service_role": "role:service",
     "service_or_admin": "rule:admin_required or rule:service_role",
-    "owner": "user_id:%(user_id)s",
+    "owner" : "user_id:%(user_id)s",
     "admin_or_owner": "rule:admin_required or rule:owner",
     "token_subject": "user_id:%(target.token.user_id)s",
     "admin_or_token_subject": "rule:admin_required or rule:token_subject",
     "service_admin_or_token_subject": "rule:service_or_admin or rule:token_subject",
-    "identity:authorize_request_token": "rule:admin_required",
-    "identity:get_access_token": "rule:admin_required",
-    "identity:get_access_token_role": "rule:admin_required",
-    "identity:list_access_tokens": "rule:admin_required",
-    "identity:list_access_token_roles": "rule:admin_required",
-    "identity:delete_access_token": "rule:admin_required",
-    "identity:get_auth_catalog": "",
-    "identity:get_auth_projects": "",
-    "identity:get_auth_domains": "",
-    "identity:get_consumer": "rule:admin_required",
-    "identity:list_consumers": "rule:admin_required",
-    "identity:create_consumer": "rule:admin_required",
-    "identity:update_consumer": "rule:admin_required",
-    "identity:delete_consumer": "rule:admin_required",
+
+    "default": "rule:admin_required",
+
+    "identity:get_region": "",
+    "identity:list_regions": "",
+    "identity:create_region": "rule:admin_required",
+    "identity:update_region": "rule:admin_required",
+    "identity:delete_region": "rule:admin_required",
+
+    "identity:get_service": "rule:admin_required",
+    "identity:list_services": "rule:admin_required",
+    "identity:create_service": "rule:admin_required",
+    "identity:update_service": "rule:admin_required",
+    "identity:delete_service": "rule:admin_required",
+
+    "identity:get_endpoint": "rule:admin_required",
+    "identity:list_endpoints": "rule:admin_required",
+    "identity:create_endpoint": "rule:admin_required",
+    "identity:update_endpoint": "rule:admin_required",
+    "identity:delete_endpoint": "rule:admin_required",
+
+    "identity:get_domain": "rule:admin_required",
+    "identity:list_domains": "rule:admin_required",
+    "identity:create_domain": "rule:admin_required",
+    "identity:update_domain": "rule:admin_required",
+    "identity:delete_domain": "rule:admin_required",
+
+    "identity:get_project": "rule:admin_required or project_id:%(target.project.id)s",
+    "identity:list_projects": "rule:admin_required",
+    "identity:list_user_projects": "rule:admin_or_owner",
+    "identity:create_project": "rule:admin_required",
+    "identity:update_project": "rule:admin_required",
+    "identity:delete_project": "rule:admin_required",
+
+    "identity:get_user": "rule:admin_required",
+    "identity:list_users": "rule:admin_required",
+    "identity:create_user": "rule:admin_required",
+    "identity:update_user": "rule:admin_required",
+    "identity:delete_user": "rule:admin_required",
+    "identity:change_password": "rule:admin_or_owner",
+
+    "identity:get_group": "rule:admin_required",
+    "identity:list_groups": "rule:admin_required",
+    "identity:list_groups_for_user": "rule:admin_or_owner",
+    "identity:create_group": "rule:admin_required",
+    "identity:update_group": "rule:admin_required",
+    "identity:delete_group": "rule:admin_required",
+    "identity:list_users_in_group": "rule:admin_required",
+    "identity:remove_user_from_group": "rule:admin_required",
+    "identity:check_user_in_group": "rule:admin_required",
+    "identity:add_user_to_group": "rule:admin_required",
+
     "identity:get_credential": "rule:admin_required",
     "identity:list_credentials": "rule:admin_required",
     "identity:create_credential": "rule:admin_required",
     "identity:update_credential": "rule:admin_required",
     "identity:delete_credential": "rule:admin_required",
-    "identity:get_domain": "rule:admin_required or token.project.domain.id:%(target.domain.id)s",
-    "identity:list_domains": "rule:admin_required",
-    "identity:create_domain": "rule:admin_required",
-    "identity:update_domain": "rule:admin_required",
-    "identity:delete_domain": "rule:admin_required",
-    "identity:create_domain_config": "rule:admin_required",
-    "identity:get_domain_config": "rule:admin_required",
-    "identity:get_security_compliance_domain_config": "",
-    "identity:update_domain_config": "rule:admin_required",
-    "identity:delete_domain_config": "rule:admin_required",
-    "identity:get_domain_config_default": "rule:admin_required",
+
     "identity:ec2_get_credential": "rule:admin_required or (rule:owner and user_id:%(target.credential.user_id)s)",
     "identity:ec2_list_credentials": "rule:admin_or_owner",
     "identity:ec2_create_credential": "rule:admin_or_owner",
     "identity:ec2_delete_credential": "rule:admin_required or (rule:owner and user_id:%(target.credential.user_id)s)",
-    "identity:get_endpoint": "rule:admin_required",
-    "identity:list_endpoints": "rule:admin_required",
-    "identity:create_endpoint": "rule:admin_required",
-    "identity:update_endpoint": "rule:admin_required",
-    "identity:delete_endpoint": "rule:admin_required",
+
+    "identity:get_role": "rule:admin_required",
+    "identity:list_roles": "rule:admin_required",
+    "identity:create_role": "rule:admin_required",
+    "identity:update_role": "rule:admin_required",
+    "identity:delete_role": "rule:admin_required",
+    "identity:get_domain_role": "rule:admin_required",
+    "identity:list_domain_roles": "rule:admin_required",
+    "identity:create_domain_role": "rule:admin_required",
+    "identity:update_domain_role": "rule:admin_required",
+    "identity:delete_domain_role": "rule:admin_required",
+
+    "identity:get_implied_role": "rule:admin_required ",
+    "identity:list_implied_roles": "rule:admin_required",
+    "identity:create_implied_role": "rule:admin_required",
+    "identity:delete_implied_role": "rule:admin_required",
+    "identity:list_role_inference_rules": "rule:admin_required",
+    "identity:check_implied_role": "rule:admin_required",
+
+    "identity:check_grant": "rule:admin_required",
+    "identity:list_grants": "rule:admin_required",
+    "identity:create_grant": "rule:admin_required",
+    "identity:revoke_grant": "rule:admin_required",
+
+    "identity:list_role_assignments": "rule:admin_required",
+    "identity:list_role_assignments_for_tree": "rule:admin_required",
+
+    "identity:get_policy": "rule:admin_required",
+    "identity:list_policies": "rule:admin_required",
+    "identity:create_policy": "rule:admin_required",
+    "identity:update_policy": "rule:admin_required",
+    "identity:delete_policy": "rule:admin_required",
+
+    "identity:check_token": "rule:admin_or_token_subject",
+    "identity:validate_token": "rule:service_admin_or_token_subject",
+    "identity:validate_token_head": "rule:service_or_admin",
+    "identity:revocation_list": "rule:service_or_admin",
+    "identity:revoke_token": "rule:admin_or_token_subject",
+
+    "identity:create_trust": "user_id:%(trust.trustor_user_id)s",
+    "identity:list_trusts": "",
+    "identity:list_roles_for_trust": "",
+    "identity:get_role_for_trust": "",
+    "identity:delete_trust": "",
+
+    "identity:create_consumer": "rule:admin_required",
+    "identity:get_consumer": "rule:admin_required",
+    "identity:list_consumers": "rule:admin_required",
+    "identity:delete_consumer": "rule:admin_required",
+    "identity:update_consumer": "rule:admin_required",
+
+    "identity:authorize_request_token": "rule:admin_required",
+    "identity:list_access_token_roles": "rule:admin_required",
+    "identity:get_access_token_role": "rule:admin_required",
+    "identity:list_access_tokens": "rule:admin_required",
+    "identity:get_access_token": "rule:admin_required",
+    "identity:delete_access_token": "rule:admin_required",
+
+    "identity:list_projects_for_endpoint": "rule:admin_required",
+    "identity:add_endpoint_to_project": "rule:admin_required",
+    "identity:check_endpoint_in_project": "rule:admin_required",
+    "identity:list_endpoints_for_project": "rule:admin_required",
+    "identity:remove_endpoint_from_project": "rule:admin_required",
+
     "identity:create_endpoint_group": "rule:admin_required",
     "identity:list_endpoint_groups": "rule:admin_required",
     "identity:get_endpoint_group": "rule:admin_required",
@@ -57,41 +144,40 @@
     "identity:list_endpoint_groups_for_project": "rule:admin_required",
     "identity:add_endpoint_group_to_project": "rule:admin_required",
     "identity:remove_endpoint_group_from_project": "rule:admin_required",
-    "identity:check_grant": "rule:admin_required",
-    "identity:list_grants": "rule:admin_required",
-    "identity:create_grant": "rule:admin_required",
-    "identity:revoke_grant": "rule:admin_required",
-    "identity:get_group": "rule:admin_required",
-    "identity:list_groups": "rule:admin_required",
-    "identity:list_groups_for_user": "rule:admin_or_owner",
-    "identity:create_group": "rule:admin_required",
-    "identity:update_group": "rule:admin_required",
-    "identity:delete_group": "rule:admin_required",
-    "identity:list_users_in_group": "rule:admin_required",
-    "identity:remove_user_from_group": "rule:admin_required",
-    "identity:check_user_in_group": "rule:admin_required",
-    "identity:add_user_to_group": "rule:admin_required",
+
     "identity:create_identity_provider": "rule:admin_required",
     "identity:list_identity_providers": "rule:admin_required",
-    "identity:get_identity_provider": "rule:admin_required",
+    "identity:get_identity_providers": "rule:admin_required",
     "identity:update_identity_provider": "rule:admin_required",
     "identity:delete_identity_provider": "rule:admin_required",
-    "identity:get_implied_role": "rule:admin_required",
-    "identity:list_implied_roles": "rule:admin_required",
-    "identity:create_implied_role": "rule:admin_required",
-    "identity:delete_implied_role": "rule:admin_required",
-    "identity:list_role_inference_rules": "rule:admin_required",
-    "identity:check_implied_role": "rule:admin_required",
+
+    "identity:create_protocol": "rule:admin_required",
+    "identity:update_protocol": "rule:admin_required",
+    "identity:get_protocol": "rule:admin_required",
+    "identity:list_protocols": "rule:admin_required",
+    "identity:delete_protocol": "rule:admin_required",
+
     "identity:create_mapping": "rule:admin_required",
     "identity:get_mapping": "rule:admin_required",
     "identity:list_mappings": "rule:admin_required",
     "identity:delete_mapping": "rule:admin_required",
     "identity:update_mapping": "rule:admin_required",
-    "identity:get_policy": "rule:admin_required",
-    "identity:list_policies": "rule:admin_required",
-    "identity:create_policy": "rule:admin_required",
-    "identity:update_policy": "rule:admin_required",
-    "identity:delete_policy": "rule:admin_required",
+
+    "identity:create_service_provider": "rule:admin_required",
+    "identity:list_service_providers": "rule:admin_required",
+    "identity:get_service_provider": "rule:admin_required",
+    "identity:update_service_provider": "rule:admin_required",
+    "identity:delete_service_provider": "rule:admin_required",
+
+    "identity:get_auth_catalog": "",
+    "identity:get_auth_projects": "",
+    "identity:get_auth_domains": "",
+
+    "identity:list_projects_for_groups": "",
+    "identity:list_domains_for_groups": "",
+
+    "identity:list_revoke_events": "",
+
     "identity:create_policy_association_for_endpoint": "rule:admin_required",
     "identity:check_policy_association_for_endpoint": "rule:admin_required",
     "identity:delete_policy_association_for_endpoint": "rule:admin_required",
@@ -103,72 +189,10 @@
     "identity:delete_policy_association_for_region_and_service": "rule:admin_required",
     "identity:get_policy_for_endpoint": "rule:admin_required",
     "identity:list_endpoints_for_policy": "rule:admin_required",
-    "identity:get_project": "rule:admin_required or project_id:%(target.project.id)s",
-    "identity:list_projects": "rule:admin_required",
-    "identity:list_user_projects": "rule:admin_or_owner",
-    "identity:create_project": "rule:admin_required",
-    "identity:update_project": "rule:admin_required",
-    "identity:delete_project": "rule:admin_required",
-    "identity:list_project_tags": "rule:admin_required or project_id:%(target.project.id)s",
-    "identity:get_project_tag": "rule:admin_required or project_id:%(target.project.id)s",
-    "identity:update_project_tags": "rule:admin_required",
-    "identity:create_project_tag": "rule:admin_required",
-    "identity:delete_project_tags": "rule:admin_required",
-    "identity:delete_project_tag": "rule:admin_required",
-    "identity:list_projects_for_endpoint": "rule:admin_required",
-    "identity:add_endpoint_to_project": "rule:admin_required",
-    "identity:check_endpoint_in_project": "rule:admin_required",
-    "identity:list_endpoints_for_project": "rule:admin_required",
-    "identity:remove_endpoint_from_project": "rule:admin_required",
-    "identity:create_protocol": "rule:admin_required",
-    "identity:update_protocol": "rule:admin_required",
-    "identity:get_protocol": "rule:admin_required",
-    "identity:list_protocols": "rule:admin_required",
-    "identity:delete_protocol": "rule:admin_required",
-    "identity:get_region": "",
-    "identity:list_regions": "",
-    "identity:create_region": "rule:admin_required",
-    "identity:update_region": "rule:admin_required",
-    "identity:delete_region": "rule:admin_required",
-    "identity:list_revoke_events": "rule:service_or_admin",
-    "identity:get_role": "rule:admin_required",
-    "identity:list_roles": "rule:admin_required",
-    "identity:create_role": "rule:admin_required",
-    "identity:update_role": "rule:admin_required",
-    "identity:delete_role": "rule:admin_required",
-    "identity:get_domain_role": "rule:admin_required",
-    "identity:list_domain_roles": "rule:admin_required",
-    "identity:create_domain_role": "rule:admin_required",
-    "identity:update_domain_role": "rule:admin_required",
-    "identity:delete_domain_role": "rule:admin_required",
-    "identity:list_role_assignments": "rule:admin_required",
-    "identity:list_role_assignments_for_tree": "rule:admin_required",
-    "identity:get_service": "rule:admin_required",
-    "identity:list_services": "rule:admin_required",
-    "identity:create_service": "rule:admin_required",
-    "identity:update_service": "rule:admin_required",
-    "identity:delete_service": "rule:admin_required",
-    "identity:create_service_provider": "rule:admin_required",
-    "identity:list_service_providers": "rule:admin_required",
-    "identity:get_service_provider": "rule:admin_required",
-    "identity:update_service_provider": "rule:admin_required",
-    "identity:delete_service_provider": "rule:admin_required",
-    "identity:revocation_list": "rule:service_or_admin",
-    "identity:check_token": "rule:admin_or_token_subject",
-    "identity:validate_token": "rule:service_admin_or_token_subject",
-    "identity:validate_token_head": "rule:service_or_admin",
-    "identity:revoke_token": "rule:admin_or_token_subject",
-    "identity:create_trust": "user_id:%(trust.trustor_user_id)s",
-    "identity:list_trusts": "",
-    "identity:list_roles_for_trust": "",
-    "identity:get_role_for_trust": "",
-    "identity:delete_trust": "",
-    "identity:get_trust": "",
-    "identity:get_user": "rule:admin_or_owner",
-    "identity:list_users": "rule:admin_required",
-    "identity:list_projects_for_user": "",
-    "identity:list_domains_for_user": "",
-    "identity:create_user": "rule:admin_required",
-    "identity:update_user": "rule:admin_required",
-    "identity:delete_user": "rule:admin_required"
+
+    "identity:create_domain_config": "rule:admin_required",
+    "identity:get_domain_config": "rule:admin_required",
+    "identity:update_domain_config": "rule:admin_required",
+    "identity:delete_domain_config": "rule:admin_required",
+    "identity:get_domain_config_default": "rule:admin_required"
 }

2019-11-21 06:49:22,996 [salt.state       :1951][INFO    ][31477] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/keystone_policy.json] at time 06:49:22.996546 duration_in_ms=24.206
2019-11-21 06:49:23,012 [salt.state       :1780][INFO    ][31477] Running state [wsgi_openstack_web] at time 06:49:23.011970
2019-11-21 06:49:23,012 [salt.state       :1813][INFO    ][31477] Executing state apache_site.enabled for [wsgi_openstack_web]
2019-11-21 06:49:23,015 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['a2ensite', 'wsgi_openstack_web'] in directory '/root'
2019-11-21 06:49:23,083 [salt.state       :300 ][INFO    ][31477] {'new': 'wsgi_openstack_web', 'old': None}
2019-11-21 06:49:23,084 [salt.state       :1951][INFO    ][31477] Completed state [wsgi_openstack_web] at time 06:49:23.084147 duration_in_ms=72.176
2019-11-21 06:49:23,778 [salt.state       :1780][INFO    ][31477] Running state [/var/log/horizon] at time 06:49:23.778176
2019-11-21 06:49:23,778 [salt.state       :1813][INFO    ][31477] Executing state file.directory for [/var/log/horizon]
2019-11-21 06:49:23,780 [salt.state       :300 ][INFO    ][31477] {'/var/log/horizon': 'New Dir'}
2019-11-21 06:49:23,780 [salt.state       :1951][INFO    ][31477] Completed state [/var/log/horizon] at time 06:49:23.780931 duration_in_ms=2.756
2019-11-21 06:49:23,781 [salt.state       :1780][INFO    ][31477] Running state [/var/log/horizon/horizon.log] at time 06:49:23.781713
2019-11-21 06:49:23,782 [salt.state       :1813][INFO    ][31477] Executing state file.managed for [/var/log/horizon/horizon.log]
2019-11-21 06:49:23,782 [salt.loaded.int.states.file:2298][WARNING ][31477] State for file: /var/log/horizon/horizon.log - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-11-21 06:49:23,783 [salt.state       :300 ][INFO    ][31477] {'new': 'file /var/log/horizon/horizon.log created', 'group': 'adm', 'user': 'horizon', 'mode': '0640'}
2019-11-21 06:49:23,784 [salt.state       :1951][INFO    ][31477] Completed state [/var/log/horizon/horizon.log] at time 06:49:23.784166 duration_in_ms=2.453
2019-11-21 06:49:23,785 [salt.state       :1780][INFO    ][31477] Running state [apache2] at time 06:49:23.785683
2019-11-21 06:49:23,786 [salt.state       :1813][INFO    ][31477] Executing state service.running for [apache2]
2019-11-21 06:49:23,786 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:49:23,803 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-11-21 06:49:23,820 [salt.state       :300 ][INFO    ][31477] The service apache2 is already running
2019-11-21 06:49:23,820 [salt.state       :1951][INFO    ][31477] Completed state [apache2] at time 06:49:23.820793 duration_in_ms=35.109
2019-11-21 06:49:23,821 [salt.state       :1780][INFO    ][31477] Running state [apache2] at time 06:49:23.821169
2019-11-21 06:49:23,821 [salt.state       :1813][INFO    ][31477] Executing state service.mod_watch for [apache2]
2019-11-21 06:49:23,822 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-11-21 06:49:23,837 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31477] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-11-21 06:49:26,093 [salt.state       :300 ][INFO    ][31477] {'apache2': True}
2019-11-21 06:49:26,094 [salt.state       :1951][INFO    ][31477] Completed state [apache2] at time 06:49:26.094277 duration_in_ms=2273.107
2019-11-21 06:49:26,106 [salt.minion      :1711][INFO    ][31477] Returning information for job: 20191121064750576695
2019-11-21 06:49:29,192 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command cmd.run with jid 20191121064929175137
2019-11-21 06:49:29,212 [salt.minion      :1432][INFO    ][2263] Starting a new job with PID 2263
2019-11-21 06:49:29,220 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2263] Executing command '. /root/keystonercv3;   openstack compute service list;   openstack network agent list;   openstack stack list;   openstack volume service list' in directory '/root'
2019-11-21 06:49:44,237 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121064944226059
2019-11-21 06:49:44,254 [salt.minion      :1432][INFO    ][2390] Starting a new job with PID 2390
2019-11-21 06:49:44,272 [salt.minion      :1711][INFO    ][2390] Returning information for job: 20191121064944226059
2019-11-21 06:50:14,443 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121065014428677
2019-11-21 06:50:14,457 [salt.minion      :1432][INFO    ][2687] Starting a new job with PID 2687
2019-11-21 06:50:14,485 [salt.minion      :1711][INFO    ][2687] Returning information for job: 20191121065014428677
2019-11-21 06:50:18,385 [salt.minion      :1711][INFO    ][2263] Returning information for job: 20191121064929175137
2019-11-21 06:50:18,945 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command cmd.run with jid 20191121065018932720
2019-11-21 06:50:18,962 [salt.minion      :1432][INFO    ][2752] Starting a new job with PID 2752
2019-11-21 06:50:18,999 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2752] Executing command '. /root/keystonercv3;   openstack network create --external --default --provider-network-type flat   --provider-physical-network physnet1 floating_net' in directory '/root'
2019-11-21 06:50:25,047 [salt.minion      :1711][INFO    ][2752] Returning information for job: 20191121065018932720
2019-11-21 06:50:25,568 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command cmd.run with jid 20191121065025556107
2019-11-21 06:50:25,582 [salt.minion      :1432][INFO    ][2804] Starting a new job with PID 2804
2019-11-21 06:50:25,591 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2804] Executing command '. /root/keystonercv3;   openstack subnet create --gateway 10.16.0.1 --no-dhcp   --allocation-pool start=10.16.0.113,end=10.16.0.253   --network floating_net --subnet-range 10.16.0.0/24 floating_subnet' in directory '/root'
2019-11-21 06:50:31,170 [salt.minion      :1711][INFO    ][2804] Returning information for job: 20191121065025556107
2019-11-21 06:50:31,793 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command state.sls_id with jid 20191121065031781206
2019-11-21 06:50:31,809 [salt.minion      :1432][INFO    ][2849] Starting a new job with PID 2849
2019-11-21 06:50:38,401 [salt.state       :915 ][INFO    ][2849] Loading fresh modules for state activity
2019-11-21 06:50:41,143 [keyring.backend  :154 ][INFO    ][2849] Loading Windows (alt)
2019-11-21 06:50:41,146 [keyring.backend  :154 ][INFO    ][2849] Loading pyfs
2019-11-21 06:50:41,147 [keyring.backend  :154 ][INFO    ][2849] Loading multi
2019-11-21 06:50:41,147 [keyring.backend  :154 ][INFO    ][2849] Loading Google
2019-11-21 06:50:41,148 [keyring.backend  :154 ][INFO    ][2849] Loading Gnome
2019-11-21 06:50:41,152 [keyring.backend  :154 ][INFO    ][2849] Loading keyczar
2019-11-21 06:50:41,152 [keyring.backend  :154 ][INFO    ][2849] Loading file
2019-11-21 06:50:41,152 [keyring.backend  :154 ][INFO    ][2849] Loading kwallet
2019-11-21 06:50:42,072 [salt.state       :1780][INFO    ][2849] Running state [debconf-utils] at time 06:50:42.072061
2019-11-21 06:50:42,072 [salt.state       :1813][INFO    ][2849] Executing state pkg.installed for [debconf-utils]
2019-11-21 06:50:42,074 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2849] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-11-21 06:50:42,516 [salt.state       :300 ][INFO    ][2849] All specified packages are already installed
2019-11-21 06:50:42,516 [salt.state       :1951][INFO    ][2849] Completed state [debconf-utils] at time 06:50:42.516907 duration_in_ms=444.849
2019-11-21 06:50:42,517 [salt.state       :1780][INFO    ][2849] Running state [nova-consoleproxy] at time 06:50:42.517599
2019-11-21 06:50:42,517 [salt.state       :1813][INFO    ][2849] Executing state debconf.set for [nova-consoleproxy]
2019-11-21 06:50:42,518 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2849] Executing command 'debconf-get-selections' in directory '/root'
2019-11-21 06:50:42,808 [salt.state       :300 ][INFO    ][2849] All specified answers are already set
2019-11-21 06:50:42,809 [salt.state       :1951][INFO    ][2849] Completed state [nova-consoleproxy] at time 06:50:42.809291 duration_in_ms=291.691
2019-11-21 06:50:42,810 [salt.state       :1780][INFO    ][2849] Running state [nova-api] at time 06:50:42.810644
2019-11-21 06:50:42,811 [salt.state       :1813][INFO    ][2849] Executing state pkg.installed for [nova-api]
2019-11-21 06:50:42,822 [salt.state       :300 ][INFO    ][2849] All specified packages are already installed
2019-11-21 06:50:42,822 [salt.state       :1951][INFO    ][2849] Completed state [nova-api] at time 06:50:42.822265 duration_in_ms=11.622
2019-11-21 06:50:42,822 [salt.state       :1780][INFO    ][2849] Running state [nova-conductor] at time 06:50:42.822833
2019-11-21 06:50:42,823 [salt.state       :1813][INFO    ][2849] Executing state pkg.installed for [nova-conductor]
2019-11-21 06:50:42,832 [salt.state       :300 ][INFO    ][2849] All specified packages are already installed
2019-11-21 06:50:42,832 [salt.state       :1951][INFO    ][2849] Completed state [nova-conductor] at time 06:50:42.832259 duration_in_ms=9.425
2019-11-21 06:50:42,832 [salt.state       :1780][INFO    ][2849] Running state [nova-consoleauth] at time 06:50:42.832793
2019-11-21 06:50:42,833 [salt.state       :1813][INFO    ][2849] Executing state pkg.installed for [nova-consoleauth]
2019-11-21 06:50:42,842 [salt.state       :300 ][INFO    ][2849] All specified packages are already installed
2019-11-21 06:50:42,842 [salt.state       :1951][INFO    ][2849] Completed state [nova-consoleauth] at time 06:50:42.842346 duration_in_ms=9.553
2019-11-21 06:50:42,843 [salt.state       :1780][INFO    ][2849] Running state [nova-scheduler] at time 06:50:42.843182
2019-11-21 06:50:42,843 [salt.state       :1813][INFO    ][2849] Executing state pkg.installed for [nova-scheduler]
2019-11-21 06:50:42,852 [salt.state       :300 ][INFO    ][2849] All specified packages are already installed
2019-11-21 06:50:42,852 [salt.state       :1951][INFO    ][2849] Completed state [nova-scheduler] at time 06:50:42.852737 duration_in_ms=9.555
2019-11-21 06:50:42,853 [salt.state       :1780][INFO    ][2849] Running state [python-novaclient] at time 06:50:42.853332
2019-11-21 06:50:42,853 [salt.state       :1813][INFO    ][2849] Executing state pkg.installed for [python-novaclient]
2019-11-21 06:50:42,862 [salt.state       :300 ][INFO    ][2849] All specified packages are already installed
2019-11-21 06:50:42,862 [salt.state       :1951][INFO    ][2849] Completed state [python-novaclient] at time 06:50:42.862812 duration_in_ms=9.48
2019-11-21 06:50:42,863 [salt.state       :1780][INFO    ][2849] Running state [nova-novncproxy] at time 06:50:42.863348
2019-11-21 06:50:42,863 [salt.state       :1813][INFO    ][2849] Executing state pkg.installed for [nova-novncproxy]
2019-11-21 06:50:42,872 [salt.state       :300 ][INFO    ][2849] All specified packages are already installed
2019-11-21 06:50:42,872 [salt.state       :1951][INFO    ][2849] Completed state [nova-novncproxy] at time 06:50:42.872643 duration_in_ms=9.295
2019-11-21 06:50:42,874 [salt.state       :1780][INFO    ][2849] Running state [nova_ssl_mysql] at time 06:50:42.874509
2019-11-21 06:50:42,874 [salt.state       :1813][INFO    ][2849] Executing state test.show_notification for [nova_ssl_mysql]
2019-11-21 06:50:42,875 [salt.state       :300 ][INFO    ][2849] Running nova._ssl.mysql
2019-11-21 06:50:42,875 [salt.state       :1951][INFO    ][2849] Completed state [nova_ssl_mysql] at time 06:50:42.875203 duration_in_ms=0.694
2019-11-21 06:50:42,875 [salt.state       :1780][INFO    ][2849] Running state [nova_controller_ssl_rabbitmq] at time 06:50:42.875426
2019-11-21 06:50:42,875 [salt.state       :1813][INFO    ][2849] Executing state test.show_notification for [nova_controller_ssl_rabbitmq]
2019-11-21 06:50:42,876 [salt.state       :300 ][INFO    ][2849] Running nova._ssl.rabbitmq
2019-11-21 06:50:42,876 [salt.state       :1951][INFO    ][2849] Completed state [nova_controller_ssl_rabbitmq] at time 06:50:42.876664 duration_in_ms=1.238
2019-11-21 06:50:42,878 [salt.state       :1780][INFO    ][2849] Running state [/etc/nova/nova.conf] at time 06:50:42.878459
2019-11-21 06:50:42,878 [salt.state       :1813][INFO    ][2849] Executing state file.managed for [/etc/nova/nova.conf]
2019-11-21 06:50:43,508 [salt.state       :300 ][INFO    ][2849] File /etc/nova/nova.conf is in the correct state
2019-11-21 06:50:43,508 [salt.state       :1951][INFO    ][2849] Completed state [/etc/nova/nova.conf] at time 06:50:43.508258 duration_in_ms=629.799
2019-11-21 06:50:43,508 [salt.state       :1780][INFO    ][2849] Running state [nova-manage api_db sync] at time 06:50:43.508874
2019-11-21 06:50:43,509 [salt.state       :1813][INFO    ][2849] Executing state cmd.run for [nova-manage api_db sync]
2019-11-21 06:50:43,509 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2849] Executing command 'nova-manage api_db sync' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:50:46,870 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command saltutil.find_job with jid 20191121065046859662
2019-11-21 06:50:46,887 [salt.minion      :1432][INFO    ][3017] Starting a new job with PID 3017
2019-11-21 06:50:46,904 [salt.minion      :1711][INFO    ][3017] Returning information for job: 20191121065046859662
2019-11-21 06:50:48,929 [salt.state       :300 ][INFO    ][2849] {'pid': 2999, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:50:48,929 [salt.state       :1951][INFO    ][2849] Completed state [nova-manage api_db sync] at time 06:50:48.929856 duration_in_ms=5420.981
2019-11-21 06:50:48,931 [salt.state       :1780][INFO    ][2849] Running state [nova-manage cell_v2 map_cell0] at time 06:50:48.931472
2019-11-21 06:50:48,931 [salt.state       :1813][INFO    ][2849] Executing state cmd.run for [nova-manage cell_v2 map_cell0]
2019-11-21 06:50:48,932 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2849] Executing command 'nova-manage cell_v2 map_cell0' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:50:54,722 [salt.state       :300 ][INFO    ][2849] {'pid': 3092, 'retcode': 0, 'stderr': '', 'stdout': 'Cell0 is already setup'}
2019-11-21 06:50:54,723 [salt.state       :1951][INFO    ][2849] Completed state [nova-manage cell_v2 map_cell0] at time 06:50:54.722986 duration_in_ms=5791.513
2019-11-21 06:50:54,724 [salt.state       :1780][INFO    ][2849] Running state [nova-manage cell_v2 create_cell --name=cell1 --verbose] at time 06:50:54.724676
2019-11-21 06:50:54,725 [salt.state       :1813][INFO    ][2849] Executing state cmd.run for [nova-manage cell_v2 create_cell --name=cell1 --verbose]
2019-11-21 06:50:54,725 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2849] Executing command 'nova-manage cell_v2 list_cells | grep cell1' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:51:00,347 [salt.state       :300 ][INFO    ][2849] unless execution succeeded
2019-11-21 06:51:00,347 [salt.state       :1951][INFO    ][2849] Completed state [nova-manage cell_v2 create_cell --name=cell1 --verbose] at time 06:51:00.347780 duration_in_ms=5623.103
2019-11-21 06:51:00,348 [salt.state       :1780][INFO    ][2849] Running state [nova-manage db sync] at time 06:51:00.348708
2019-11-21 06:51:00,349 [salt.state       :1813][INFO    ][2849] Executing state cmd.run for [nova-manage db sync]
2019-11-21 06:51:00,349 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2849] Executing command 'nova-manage db sync' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:51:05,874 [salt.state       :300 ][INFO    ][2849] {'pid': 3204, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-11-21 06:51:05,875 [salt.state       :1951][INFO    ][2849] Completed state [nova-manage db sync] at time 06:51:05.875017 duration_in_ms=5526.309
2019-11-21 06:51:05,876 [salt.state       :1780][INFO    ][2849] Running state [nova-manage cell_v2 discover_hosts --verbose] at time 06:51:05.875876
2019-11-21 06:51:05,876 [salt.state       :1813][INFO    ][2849] Executing state cmd.run for [nova-manage cell_v2 discover_hosts --verbose]
2019-11-21 06:51:05,877 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2849] Executing command 'nova-manage cell_v2 discover_hosts --verbose' as user 'nova' in directory '/var/lib/nova'
2019-11-21 06:51:11,176 [salt.state       :300 ][INFO    ][2849] {'pid': 3266, 'retcode': 0, 'stderr': '', 'stdout': "Found 2 cell mappings.\nSkipping cell0 since it does not contain hosts.\nGetting computes from cell 'cell1': f10893a6-686c-4f64-81f7-f164ea34eb7e\nChecking host mapping for compute host 'cmp001': e93df03a-c66b-421f-b2f3-8f481be78be8\nCreating host mapping for compute host 'cmp001': e93df03a-c66b-421f-b2f3-8f481be78be8\nChecking host mapping for compute host 'cmp002': bd6d11be-0279-4fce-a61d-62a8945efd96\nCreating host mapping for compute host 'cmp002': bd6d11be-0279-4fce-a61d-62a8945efd96\nFound 2 unmapped computes in cell: f10893a6-686c-4f64-81f7-f164ea34eb7e"}
2019-11-21 06:51:11,176 [salt.state       :1951][INFO    ][2849] Completed state [nova-manage cell_v2 discover_hosts --verbose] at time 06:51:11.176793 duration_in_ms=5300.916
2019-11-21 06:51:11,177 [salt.minion      :1711][INFO    ][2849] Returning information for job: 20191121065031781206
2019-11-21 06:51:11,853 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command cp.push_dir with jid 20191121065111839808
2019-11-21 06:51:11,873 [salt.minion      :1432][INFO    ][3308] Starting a new job with PID 3308
2019-11-21 06:51:13,398 [salt.minion      :1711][INFO    ][3308] Returning information for job: 20191121065111839808
2019-11-21 06:51:30,933 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command pillar.get with jid 20191121065130919005
2019-11-21 06:51:30,949 [salt.minion      :1432][INFO    ][3573] Starting a new job with PID 3573
2019-11-21 06:51:30,955 [salt.minion      :1711][INFO    ][3573] Returning information for job: 20191121065130919005
2019-11-21 07:23:23,847 [salt.utils.schedule:1377][INFO    ][11276] Running scheduled job: __mine_interval
2019-11-21 08:23:23,849 [salt.utils.schedule:1377][INFO    ][11276] Running scheduled job: __mine_interval
2019-11-21 09:23:23,850 [salt.utils.schedule:1377][INFO    ][11276] Running scheduled job: __mine_interval
2019-11-21 10:23:23,846 [salt.utils.schedule:1377][INFO    ][11276] Running scheduled job: __mine_interval
2019-11-21 11:23:23,846 [salt.utils.schedule:1377][INFO    ][11276] Running scheduled job: __mine_interval
2019-11-21 12:23:23,846 [salt.utils.schedule:1377][INFO    ][11276] Running scheduled job: __mine_interval
2019-11-21 13:23:23,846 [salt.utils.schedule:1377][INFO    ][11276] Running scheduled job: __mine_interval
2019-11-21 14:23:23,847 [salt.utils.schedule:1377][INFO    ][11276] Running scheduled job: __mine_interval
2019-11-21 15:23:23,847 [salt.utils.schedule:1377][INFO    ][11276] Running scheduled job: __mine_interval
2019-11-21 16:07:45,651 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command pillar.get with jid 20191121160745569261
2019-11-21 16:07:45,728 [salt.minion      :1432][INFO    ][20056] Starting a new job with PID 20056
2019-11-21 16:07:45,797 [salt.minion      :1711][INFO    ][20056] Returning information for job: 20191121160745569261
2019-11-21 16:09:04,250 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command grains.get with jid 20191121160904204210
2019-11-21 16:09:04,332 [salt.minion      :1432][INFO    ][20614] Starting a new job with PID 20614
2019-11-21 16:09:04,386 [salt.minion      :1711][INFO    ][20614] Returning information for job: 20191121160904204210
2019-11-21 16:23:23,847 [salt.utils.schedule:1377][INFO    ][11276] Running scheduled job: __mine_interval
2019-11-21 17:23:23,847 [salt.utils.schedule:1377][INFO    ][11276] Running scheduled job: __mine_interval
2019-11-21 17:31:14,354 [salt.minion      :1308][INFO    ][11276] User sudo_ubuntu Executing command cp.push_dir with jid 20191121173114339769
2019-11-21 17:31:14,424 [salt.minion      :1432][INFO    ][18016] Starting a new job with PID 18016
