2018-09-29 13:51:33,092 [salt.utils.decorators:613 ][WARNING ][3647] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:51:45,758 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:51:56,116 [salt.loaded.int.states.file:2150][WARNING ][4974] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-09-29 13:52:04,458 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,459 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,461 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,462 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,463 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,466 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,467 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,469 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,470 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,471 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,472 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,473 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,475 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,476 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,479 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,480 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,482 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,483 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,484 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,485 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,486 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,487 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,489 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,490 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,492 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,493 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,494 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,495 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,496 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,498 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,499 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,500 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,502 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,503 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,504 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,505 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,506 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,508 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,509 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:04,510 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:05,554 [salt.utils.decorators:613 ][WARNING ][4974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:52:07,362 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8449] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-09-29 13:52:07,378 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8449] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-09-29 13:52:07,423 [salt.utils.parsers:1051][WARNING ][2131] Minion received a SIGTERM. Exiting.
2018-09-29 13:52:08,235 [salt.cli.daemons :293 ][INFO    ][8501] Setting up the Salt Minion "cmp002.mcp-pike-odl-ha.local"
2018-09-29 13:52:08,310 [salt.cli.daemons :82  ][INFO    ][8501] Starting up the Salt Minion
2018-09-29 13:52:08,310 [salt.utils.event :1017][INFO    ][8501] Starting pull socket on /var/run/salt/minion/minion_event_a114ed337d_pull.ipc
2018-09-29 13:52:09,012 [salt.minion      :976 ][INFO    ][8501] Creating minion process manager
2018-09-29 13:52:10,253 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][8501] Executing command ['date', '+%z'] in directory '/root'
2018-09-29 13:52:10,265 [salt.utils.schedule:568 ][INFO    ][8501] Updating job settings for scheduled job: __mine_interval
2018-09-29 13:52:10,266 [salt.minion      :1107][INFO    ][8501] Added mine.update to scheduler
2018-09-29 13:52:10,270 [salt.minion      :1965][INFO    ][8501] Minion is starting as user 'root'
2018-09-29 13:52:10,294 [salt.minion      :2324][INFO    ][8501] Minion is ready to receive requests!
2018-09-29 13:52:10,843 [salt.minion      :1307][INFO    ][8501] User sudo_ubuntu Executing command state.apply with jid 20180929135210828690
2018-09-29 13:52:10,852 [salt.minion      :1431][INFO    ][8587] Starting a new job with PID 8587
2018-09-29 13:52:11,467 [salt.state       :905 ][INFO    ][8587] Loading fresh modules for state activity
2018-09-29 13:52:11,510 [salt.fileclient  :1215][INFO    ][8587] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-09-29 13:52:11,622 [salt.fileclient  :1215][INFO    ][8587] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-09-29 13:52:11,728 [salt.fileclient  :1215][INFO    ][8587] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-09-29 13:52:11,890 [salt.fileclient  :1215][INFO    ][8587] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-09-29 13:52:12,129 [salt.fileclient  :1215][INFO    ][8587] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-09-29 13:52:12,224 [salt.state       :1770][INFO    ][8587] Running state [/etc/hostname] at time 13:52:12.224287
2018-09-29 13:52:12,224 [salt.state       :1803][INFO    ][8587] Executing state file.managed for [/etc/hostname]
2018-09-29 13:52:12,255 [salt.fileclient  :1215][INFO    ][8587] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-09-29 13:52:12,279 [salt.state       :290 ][INFO    ][8587] File /etc/hostname is in the correct state
2018-09-29 13:52:12,279 [salt.state       :1941][INFO    ][8587] Completed state [/etc/hostname] at time 13:52:12.279872 duration_in_ms=55.584
2018-09-29 13:52:12,281 [salt.state       :1770][INFO    ][8587] Running state [hostname cmp002] at time 13:52:12.281729
2018-09-29 13:52:12,281 [salt.state       :1803][INFO    ][8587] Executing state cmd.run for [hostname cmp002]
2018-09-29 13:52:12,283 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command 'test "$(hostname)" = "cmp002"' in directory '/root'
2018-09-29 13:52:12,290 [salt.state       :290 ][INFO    ][8587] unless execution succeeded
2018-09-29 13:52:12,290 [salt.state       :1941][INFO    ][8587] Completed state [hostname cmp002] at time 13:52:12.290792 duration_in_ms=9.063
2018-09-29 13:52:12,291 [salt.state       :1770][INFO    ][8587] Running state [mdb02] at time 13:52:12.291589
2018-09-29 13:52:12,291 [salt.state       :1803][INFO    ][8587] Executing state host.present for [mdb02]
2018-09-29 13:52:12,292 [salt.state       :290 ][INFO    ][8587] {'host': 'mdb02'}
2018-09-29 13:52:12,292 [salt.state       :1941][INFO    ][8587] Completed state [mdb02] at time 13:52:12.292905 duration_in_ms=1.317
2018-09-29 13:52:12,293 [salt.state       :1770][INFO    ][8587] Running state [mdb02.mcp-pike-odl-ha.local] at time 13:52:12.293130
2018-09-29 13:52:12,293 [salt.state       :1803][INFO    ][8587] Executing state host.present for [mdb02.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,294 [salt.state       :290 ][INFO    ][8587] {'host': 'mdb02.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,294 [salt.state       :1941][INFO    ][8587] Completed state [mdb02.mcp-pike-odl-ha.local] at time 13:52:12.294155 duration_in_ms=1.024
2018-09-29 13:52:12,294 [salt.state       :1770][INFO    ][8587] Running state [mdb03] at time 13:52:12.294378
2018-09-29 13:52:12,294 [salt.state       :1803][INFO    ][8587] Executing state host.present for [mdb03]
2018-09-29 13:52:12,295 [salt.state       :290 ][INFO    ][8587] {'host': 'mdb03'}
2018-09-29 13:52:12,295 [salt.state       :1941][INFO    ][8587] Completed state [mdb03] at time 13:52:12.295400 duration_in_ms=1.022
2018-09-29 13:52:12,295 [salt.state       :1770][INFO    ][8587] Running state [mdb03.mcp-pike-odl-ha.local] at time 13:52:12.295597
2018-09-29 13:52:12,295 [salt.state       :1803][INFO    ][8587] Executing state host.present for [mdb03.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,296 [salt.state       :290 ][INFO    ][8587] {'host': 'mdb03.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,296 [salt.state       :1941][INFO    ][8587] Completed state [mdb03.mcp-pike-odl-ha.local] at time 13:52:12.296607 duration_in_ms=1.009
2018-09-29 13:52:12,296 [salt.state       :1770][INFO    ][8587] Running state [mdb01] at time 13:52:12.296853
2018-09-29 13:52:12,297 [salt.state       :1803][INFO    ][8587] Executing state host.present for [mdb01]
2018-09-29 13:52:12,297 [salt.state       :290 ][INFO    ][8587] {'host': 'mdb01'}
2018-09-29 13:52:12,297 [salt.state       :1941][INFO    ][8587] Completed state [mdb01] at time 13:52:12.297924 duration_in_ms=1.071
2018-09-29 13:52:12,298 [salt.state       :1770][INFO    ][8587] Running state [mdb01.mcp-pike-odl-ha.local] at time 13:52:12.298129
2018-09-29 13:52:12,298 [salt.state       :1803][INFO    ][8587] Executing state host.present for [mdb01.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,299 [salt.state       :290 ][INFO    ][8587] {'host': 'mdb01.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,299 [salt.state       :1941][INFO    ][8587] Completed state [mdb01.mcp-pike-odl-ha.local] at time 13:52:12.299164 duration_in_ms=1.021
2018-09-29 13:52:12,299 [salt.state       :1770][INFO    ][8587] Running state [mdb] at time 13:52:12.299363
2018-09-29 13:52:12,299 [salt.state       :1803][INFO    ][8587] Executing state host.present for [mdb]
2018-09-29 13:52:12,300 [salt.state       :290 ][INFO    ][8587] {'host': 'mdb'}
2018-09-29 13:52:12,300 [salt.state       :1941][INFO    ][8587] Completed state [mdb] at time 13:52:12.300387 duration_in_ms=1.024
2018-09-29 13:52:12,300 [salt.state       :1770][INFO    ][8587] Running state [mdb.mcp-pike-odl-ha.local] at time 13:52:12.300597
2018-09-29 13:52:12,300 [salt.state       :1803][INFO    ][8587] Executing state host.present for [mdb.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,301 [salt.state       :290 ][INFO    ][8587] {'host': 'mdb.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,301 [salt.state       :1941][INFO    ][8587] Completed state [mdb.mcp-pike-odl-ha.local] at time 13:52:12.301648 duration_in_ms=1.05
2018-09-29 13:52:12,301 [salt.state       :1770][INFO    ][8587] Running state [cfg01] at time 13:52:12.301866
2018-09-29 13:52:12,302 [salt.state       :1803][INFO    ][8587] Executing state host.present for [cfg01]
2018-09-29 13:52:12,302 [salt.state       :290 ][INFO    ][8587] {'host': 'cfg01'}
2018-09-29 13:52:12,302 [salt.state       :1941][INFO    ][8587] Completed state [cfg01] at time 13:52:12.302915 duration_in_ms=1.049
2018-09-29 13:52:12,303 [salt.state       :1770][INFO    ][8587] Running state [cfg01.mcp-pike-odl-ha.local] at time 13:52:12.303114
2018-09-29 13:52:12,303 [salt.state       :1803][INFO    ][8587] Executing state host.present for [cfg01.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,304 [salt.state       :290 ][INFO    ][8587] {'host': 'cfg01.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,304 [salt.state       :1941][INFO    ][8587] Completed state [cfg01.mcp-pike-odl-ha.local] at time 13:52:12.304155 duration_in_ms=1.041
2018-09-29 13:52:12,304 [salt.state       :1770][INFO    ][8587] Running state [prx01] at time 13:52:12.304368
2018-09-29 13:52:12,304 [salt.state       :1803][INFO    ][8587] Executing state host.present for [prx01]
2018-09-29 13:52:12,305 [salt.state       :290 ][INFO    ][8587] {'host': 'prx01'}
2018-09-29 13:52:12,305 [salt.state       :1941][INFO    ][8587] Completed state [prx01] at time 13:52:12.305439 duration_in_ms=1.07
2018-09-29 13:52:12,305 [salt.state       :1770][INFO    ][8587] Running state [prx01.mcp-pike-odl-ha.local] at time 13:52:12.305678
2018-09-29 13:52:12,305 [salt.state       :1803][INFO    ][8587] Executing state host.present for [prx01.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,306 [salt.state       :290 ][INFO    ][8587] {'host': 'prx01.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,306 [salt.state       :1941][INFO    ][8587] Completed state [prx01.mcp-pike-odl-ha.local] at time 13:52:12.306771 duration_in_ms=1.094
2018-09-29 13:52:12,307 [salt.state       :1770][INFO    ][8587] Running state [kvm01] at time 13:52:12.306976
2018-09-29 13:52:12,307 [salt.state       :1803][INFO    ][8587] Executing state host.present for [kvm01]
2018-09-29 13:52:12,308 [salt.state       :290 ][INFO    ][8587] {'host': 'kvm01'}
2018-09-29 13:52:12,308 [salt.state       :1941][INFO    ][8587] Completed state [kvm01] at time 13:52:12.308156 duration_in_ms=1.179
2018-09-29 13:52:12,308 [salt.state       :1770][INFO    ][8587] Running state [kvm01.mcp-pike-odl-ha.local] at time 13:52:12.308378
2018-09-29 13:52:12,308 [salt.state       :1803][INFO    ][8587] Executing state host.present for [kvm01.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,309 [salt.state       :290 ][INFO    ][8587] {'host': 'kvm01.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,309 [salt.state       :1941][INFO    ][8587] Completed state [kvm01.mcp-pike-odl-ha.local] at time 13:52:12.309474 duration_in_ms=1.082
2018-09-29 13:52:12,309 [salt.state       :1770][INFO    ][8587] Running state [kvm03] at time 13:52:12.309682
2018-09-29 13:52:12,309 [salt.state       :1803][INFO    ][8587] Executing state host.present for [kvm03]
2018-09-29 13:52:12,310 [salt.state       :290 ][INFO    ][8587] {'host': 'kvm03'}
2018-09-29 13:52:12,310 [salt.state       :1941][INFO    ][8587] Completed state [kvm03] at time 13:52:12.310744 duration_in_ms=1.063
2018-09-29 13:52:12,310 [salt.state       :1770][INFO    ][8587] Running state [kvm03.mcp-pike-odl-ha.local] at time 13:52:12.310962
2018-09-29 13:52:12,311 [salt.state       :1803][INFO    ][8587] Executing state host.present for [kvm03.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,311 [salt.state       :290 ][INFO    ][8587] {'host': 'kvm03.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,312 [salt.state       :1941][INFO    ][8587] Completed state [kvm03.mcp-pike-odl-ha.local] at time 13:52:12.312032 duration_in_ms=1.07
2018-09-29 13:52:12,312 [salt.state       :1770][INFO    ][8587] Running state [kvm02] at time 13:52:12.312251
2018-09-29 13:52:12,312 [salt.state       :1803][INFO    ][8587] Executing state host.present for [kvm02]
2018-09-29 13:52:12,313 [salt.state       :290 ][INFO    ][8587] {'host': 'kvm02'}
2018-09-29 13:52:12,313 [salt.state       :1941][INFO    ][8587] Completed state [kvm02] at time 13:52:12.313353 duration_in_ms=1.102
2018-09-29 13:52:12,313 [salt.state       :1770][INFO    ][8587] Running state [kvm02.mcp-pike-odl-ha.local] at time 13:52:12.313577
2018-09-29 13:52:12,313 [salt.state       :1803][INFO    ][8587] Executing state host.present for [kvm02.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,314 [salt.state       :290 ][INFO    ][8587] {'host': 'kvm02.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,314 [salt.state       :1941][INFO    ][8587] Completed state [kvm02.mcp-pike-odl-ha.local] at time 13:52:12.314660 duration_in_ms=1.083
2018-09-29 13:52:12,314 [salt.state       :1770][INFO    ][8587] Running state [dbs] at time 13:52:12.314882
2018-09-29 13:52:12,315 [salt.state       :1803][INFO    ][8587] Executing state host.present for [dbs]
2018-09-29 13:52:12,315 [salt.state       :290 ][INFO    ][8587] {'host': 'dbs'}
2018-09-29 13:52:12,316 [salt.state       :1941][INFO    ][8587] Completed state [dbs] at time 13:52:12.315973 duration_in_ms=1.092
2018-09-29 13:52:12,316 [salt.state       :1770][INFO    ][8587] Running state [dbs.mcp-pike-odl-ha.local] at time 13:52:12.316184
2018-09-29 13:52:12,316 [salt.state       :1803][INFO    ][8587] Executing state host.present for [dbs.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,317 [salt.state       :290 ][INFO    ][8587] {'host': 'dbs.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,317 [salt.state       :1941][INFO    ][8587] Completed state [dbs.mcp-pike-odl-ha.local] at time 13:52:12.317313 duration_in_ms=1.129
2018-09-29 13:52:12,317 [salt.state       :1770][INFO    ][8587] Running state [prx] at time 13:52:12.317536
2018-09-29 13:52:12,317 [salt.state       :1803][INFO    ][8587] Executing state host.present for [prx]
2018-09-29 13:52:12,318 [salt.state       :290 ][INFO    ][8587] {'host': 'prx'}
2018-09-29 13:52:12,318 [salt.state       :1941][INFO    ][8587] Completed state [prx] at time 13:52:12.318629 duration_in_ms=1.094
2018-09-29 13:52:12,318 [salt.state       :1770][INFO    ][8587] Running state [prx.mcp-pike-odl-ha.local] at time 13:52:12.318851
2018-09-29 13:52:12,319 [salt.state       :1803][INFO    ][8587] Executing state host.present for [prx.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,319 [salt.state       :290 ][INFO    ][8587] {'host': 'prx.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,319 [salt.state       :1941][INFO    ][8587] Completed state [prx.mcp-pike-odl-ha.local] at time 13:52:12.319946 duration_in_ms=1.095
2018-09-29 13:52:12,320 [salt.state       :1770][INFO    ][8587] Running state [prx02] at time 13:52:12.320169
2018-09-29 13:52:12,320 [salt.state       :1803][INFO    ][8587] Executing state host.present for [prx02]
2018-09-29 13:52:12,321 [salt.state       :290 ][INFO    ][8587] {'host': 'prx02'}
2018-09-29 13:52:12,321 [salt.state       :1941][INFO    ][8587] Completed state [prx02] at time 13:52:12.321303 duration_in_ms=1.134
2018-09-29 13:52:12,321 [salt.state       :1770][INFO    ][8587] Running state [prx02.mcp-pike-odl-ha.local] at time 13:52:12.321527
2018-09-29 13:52:12,321 [salt.state       :1803][INFO    ][8587] Executing state host.present for [prx02.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,322 [salt.state       :290 ][INFO    ][8587] {'host': 'prx02.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,322 [salt.state       :1941][INFO    ][8587] Completed state [prx02.mcp-pike-odl-ha.local] at time 13:52:12.322644 duration_in_ms=1.118
2018-09-29 13:52:12,322 [salt.state       :1770][INFO    ][8587] Running state [msg02] at time 13:52:12.322870
2018-09-29 13:52:12,323 [salt.state       :1803][INFO    ][8587] Executing state host.present for [msg02]
2018-09-29 13:52:12,323 [salt.state       :290 ][INFO    ][8587] {'host': 'msg02'}
2018-09-29 13:52:12,324 [salt.state       :1941][INFO    ][8587] Completed state [msg02] at time 13:52:12.324002 duration_in_ms=1.132
2018-09-29 13:52:12,324 [salt.state       :1770][INFO    ][8587] Running state [msg02.mcp-pike-odl-ha.local] at time 13:52:12.324225
2018-09-29 13:52:12,324 [salt.state       :1803][INFO    ][8587] Executing state host.present for [msg02.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,325 [salt.state       :290 ][INFO    ][8587] {'host': 'msg02.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,325 [salt.state       :1941][INFO    ][8587] Completed state [msg02.mcp-pike-odl-ha.local] at time 13:52:12.325474 duration_in_ms=1.248
2018-09-29 13:52:12,325 [salt.state       :1770][INFO    ][8587] Running state [msg03] at time 13:52:12.325703
2018-09-29 13:52:12,325 [salt.state       :1803][INFO    ][8587] Executing state host.present for [msg03]
2018-09-29 13:52:12,326 [salt.state       :290 ][INFO    ][8587] {'host': 'msg03'}
2018-09-29 13:52:12,326 [salt.state       :1941][INFO    ][8587] Completed state [msg03] at time 13:52:12.326846 duration_in_ms=1.13
2018-09-29 13:52:12,327 [salt.state       :1770][INFO    ][8587] Running state [msg03.mcp-pike-odl-ha.local] at time 13:52:12.327063
2018-09-29 13:52:12,327 [salt.state       :1803][INFO    ][8587] Executing state host.present for [msg03.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,328 [salt.state       :290 ][INFO    ][8587] {'host': 'msg03.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,328 [salt.state       :1941][INFO    ][8587] Completed state [msg03.mcp-pike-odl-ha.local] at time 13:52:12.328213 duration_in_ms=1.151
2018-09-29 13:52:12,328 [salt.state       :1770][INFO    ][8587] Running state [msg01] at time 13:52:12.328430
2018-09-29 13:52:12,328 [salt.state       :1803][INFO    ][8587] Executing state host.present for [msg01]
2018-09-29 13:52:12,329 [salt.state       :290 ][INFO    ][8587] {'host': 'msg01'}
2018-09-29 13:52:12,329 [salt.state       :1941][INFO    ][8587] Completed state [msg01] at time 13:52:12.329632 duration_in_ms=1.202
2018-09-29 13:52:12,329 [salt.state       :1770][INFO    ][8587] Running state [msg01.mcp-pike-odl-ha.local] at time 13:52:12.329899
2018-09-29 13:52:12,330 [salt.state       :1803][INFO    ][8587] Executing state host.present for [msg01.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,330 [salt.state       :290 ][INFO    ][8587] {'host': 'msg01.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,331 [salt.state       :1941][INFO    ][8587] Completed state [msg01.mcp-pike-odl-ha.local] at time 13:52:12.331069 duration_in_ms=1.17
2018-09-29 13:52:12,331 [salt.state       :1770][INFO    ][8587] Running state [msg] at time 13:52:12.331328
2018-09-29 13:52:12,331 [salt.state       :1803][INFO    ][8587] Executing state host.present for [msg]
2018-09-29 13:52:12,332 [salt.state       :290 ][INFO    ][8587] {'host': 'msg'}
2018-09-29 13:52:12,332 [salt.state       :1941][INFO    ][8587] Completed state [msg] at time 13:52:12.332492 duration_in_ms=1.164
2018-09-29 13:52:12,332 [salt.state       :1770][INFO    ][8587] Running state [msg.mcp-pike-odl-ha.local] at time 13:52:12.332755
2018-09-29 13:52:12,332 [salt.state       :1803][INFO    ][8587] Executing state host.present for [msg.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,333 [salt.state       :290 ][INFO    ][8587] {'host': 'msg.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,333 [salt.state       :1941][INFO    ][8587] Completed state [msg.mcp-pike-odl-ha.local] at time 13:52:12.333936 duration_in_ms=1.181
2018-09-29 13:52:12,334 [salt.state       :1770][INFO    ][8587] Running state [cfg01] at time 13:52:12.334194
2018-09-29 13:52:12,334 [salt.state       :1803][INFO    ][8587] Executing state host.present for [cfg01]
2018-09-29 13:52:12,334 [salt.state       :290 ][INFO    ][8587] Host cfg01 (192.168.10.11) already present
2018-09-29 13:52:12,334 [salt.state       :1941][INFO    ][8587] Completed state [cfg01] at time 13:52:12.334910 duration_in_ms=0.716
2018-09-29 13:52:12,335 [salt.state       :1770][INFO    ][8587] Running state [cfg01.mcp-pike-odl-ha.local] at time 13:52:12.335134
2018-09-29 13:52:12,335 [salt.state       :1803][INFO    ][8587] Executing state host.present for [cfg01.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,335 [salt.state       :290 ][INFO    ][8587] Host cfg01.mcp-pike-odl-ha.local (192.168.10.11) already present
2018-09-29 13:52:12,335 [salt.state       :1941][INFO    ][8587] Completed state [cfg01.mcp-pike-odl-ha.local] at time 13:52:12.335824 duration_in_ms=0.69
2018-09-29 13:52:12,336 [salt.state       :1770][INFO    ][8587] Running state [cmp002] at time 13:52:12.336046
2018-09-29 13:52:12,336 [salt.state       :1803][INFO    ][8587] Executing state host.present for [cmp002]
2018-09-29 13:52:12,337 [salt.state       :290 ][INFO    ][8587] {'host': 'cmp002'}
2018-09-29 13:52:12,337 [salt.state       :1941][INFO    ][8587] Completed state [cmp002] at time 13:52:12.337248 duration_in_ms=1.202
2018-09-29 13:52:12,337 [salt.state       :1770][INFO    ][8587] Running state [cmp002.mcp-pike-odl-ha.local] at time 13:52:12.337480
2018-09-29 13:52:12,337 [salt.state       :1803][INFO    ][8587] Executing state host.present for [cmp002.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,338 [salt.state       :290 ][INFO    ][8587] {'host': 'cmp002.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,338 [salt.state       :1941][INFO    ][8587] Completed state [cmp002.mcp-pike-odl-ha.local] at time 13:52:12.338667 duration_in_ms=1.187
2018-09-29 13:52:12,338 [salt.state       :1770][INFO    ][8587] Running state [cmp001] at time 13:52:12.338926
2018-09-29 13:52:12,339 [salt.state       :1803][INFO    ][8587] Executing state host.present for [cmp001]
2018-09-29 13:52:12,340 [salt.state       :290 ][INFO    ][8587] {'host': 'cmp001'}
2018-09-29 13:52:12,340 [salt.state       :1941][INFO    ][8587] Completed state [cmp001] at time 13:52:12.340216 duration_in_ms=1.29
2018-09-29 13:52:12,340 [salt.state       :1770][INFO    ][8587] Running state [cmp001.mcp-pike-odl-ha.local] at time 13:52:12.340466
2018-09-29 13:52:12,340 [salt.state       :1803][INFO    ][8587] Executing state host.present for [cmp001.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,341 [salt.state       :290 ][INFO    ][8587] {'host': 'cmp001.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,341 [salt.state       :1941][INFO    ][8587] Completed state [cmp001.mcp-pike-odl-ha.local] at time 13:52:12.341694 duration_in_ms=1.229
2018-09-29 13:52:12,341 [salt.state       :1770][INFO    ][8587] Running state [dbs01] at time 13:52:12.341956
2018-09-29 13:52:12,342 [salt.state       :1803][INFO    ][8587] Executing state host.present for [dbs01]
2018-09-29 13:52:12,343 [salt.state       :290 ][INFO    ][8587] {'host': 'dbs01'}
2018-09-29 13:52:12,343 [salt.state       :1941][INFO    ][8587] Completed state [dbs01] at time 13:52:12.343174 duration_in_ms=1.218
2018-09-29 13:52:12,343 [salt.state       :1770][INFO    ][8587] Running state [dbs01.mcp-pike-odl-ha.local] at time 13:52:12.343436
2018-09-29 13:52:12,343 [salt.state       :1803][INFO    ][8587] Executing state host.present for [dbs01.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,344 [salt.state       :290 ][INFO    ][8587] {'host': 'dbs01.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,344 [salt.state       :1941][INFO    ][8587] Completed state [dbs01.mcp-pike-odl-ha.local] at time 13:52:12.344652 duration_in_ms=1.215
2018-09-29 13:52:12,344 [salt.state       :1770][INFO    ][8587] Running state [dbs02] at time 13:52:12.344900
2018-09-29 13:52:12,345 [salt.state       :1803][INFO    ][8587] Executing state host.present for [dbs02]
2018-09-29 13:52:12,345 [salt.state       :290 ][INFO    ][8587] {'host': 'dbs02'}
2018-09-29 13:52:12,346 [salt.state       :1941][INFO    ][8587] Completed state [dbs02] at time 13:52:12.346127 duration_in_ms=1.215
2018-09-29 13:52:12,346 [salt.state       :1770][INFO    ][8587] Running state [dbs02.mcp-pike-odl-ha.local] at time 13:52:12.346358
2018-09-29 13:52:12,346 [salt.state       :1803][INFO    ][8587] Executing state host.present for [dbs02.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,347 [salt.state       :290 ][INFO    ][8587] {'host': 'dbs02.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,347 [salt.state       :1941][INFO    ][8587] Completed state [dbs02.mcp-pike-odl-ha.local] at time 13:52:12.347562 duration_in_ms=1.203
2018-09-29 13:52:12,347 [salt.state       :1770][INFO    ][8587] Running state [dbs03] at time 13:52:12.347801
2018-09-29 13:52:12,348 [salt.state       :1803][INFO    ][8587] Executing state host.present for [dbs03]
2018-09-29 13:52:12,348 [salt.state       :290 ][INFO    ][8587] {'host': 'dbs03'}
2018-09-29 13:52:12,349 [salt.state       :1941][INFO    ][8587] Completed state [dbs03] at time 13:52:12.349061 duration_in_ms=1.261
2018-09-29 13:52:12,349 [salt.state       :1770][INFO    ][8587] Running state [dbs03.mcp-pike-odl-ha.local] at time 13:52:12.349305
2018-09-29 13:52:12,349 [salt.state       :1803][INFO    ][8587] Executing state host.present for [dbs03.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,350 [salt.state       :290 ][INFO    ][8587] {'host': 'dbs03.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,350 [salt.state       :1941][INFO    ][8587] Completed state [dbs03.mcp-pike-odl-ha.local] at time 13:52:12.350521 duration_in_ms=1.216
2018-09-29 13:52:12,350 [salt.state       :1770][INFO    ][8587] Running state [odl01] at time 13:52:12.350766
2018-09-29 13:52:12,350 [salt.state       :1803][INFO    ][8587] Executing state host.present for [odl01]
2018-09-29 13:52:12,351 [salt.state       :290 ][INFO    ][8587] {'host': 'odl01'}
2018-09-29 13:52:12,352 [salt.state       :1941][INFO    ][8587] Completed state [odl01] at time 13:52:12.352009 duration_in_ms=1.243
2018-09-29 13:52:12,352 [salt.state       :1770][INFO    ][8587] Running state [odl01.mcp-pike-odl-ha.local] at time 13:52:12.352255
2018-09-29 13:52:12,352 [salt.state       :1803][INFO    ][8587] Executing state host.present for [odl01.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,353 [salt.state       :290 ][INFO    ][8587] {'host': 'odl01.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,353 [salt.state       :1941][INFO    ][8587] Completed state [odl01.mcp-pike-odl-ha.local] at time 13:52:12.353623 duration_in_ms=1.368
2018-09-29 13:52:12,353 [salt.state       :1770][INFO    ][8587] Running state [mas01] at time 13:52:12.353892
2018-09-29 13:52:12,354 [salt.state       :1803][INFO    ][8587] Executing state host.present for [mas01]
2018-09-29 13:52:12,354 [salt.state       :290 ][INFO    ][8587] {'host': 'mas01'}
2018-09-29 13:52:12,355 [salt.state       :1941][INFO    ][8587] Completed state [mas01] at time 13:52:12.355135 duration_in_ms=1.242
2018-09-29 13:52:12,355 [salt.state       :1770][INFO    ][8587] Running state [mas01.mcp-pike-odl-ha.local] at time 13:52:12.355405
2018-09-29 13:52:12,355 [salt.state       :1803][INFO    ][8587] Executing state host.present for [mas01.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,356 [salt.state       :290 ][INFO    ][8587] {'host': 'mas01.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,356 [salt.state       :1941][INFO    ][8587] Completed state [mas01.mcp-pike-odl-ha.local] at time 13:52:12.356671 duration_in_ms=1.265
2018-09-29 13:52:12,356 [salt.state       :1770][INFO    ][8587] Running state [ctl02] at time 13:52:12.356919
2018-09-29 13:52:12,357 [salt.state       :1803][INFO    ][8587] Executing state host.present for [ctl02]
2018-09-29 13:52:12,358 [salt.state       :290 ][INFO    ][8587] {'host': 'ctl02'}
2018-09-29 13:52:12,358 [salt.state       :1941][INFO    ][8587] Completed state [ctl02] at time 13:52:12.358186 duration_in_ms=1.267
2018-09-29 13:52:12,358 [salt.state       :1770][INFO    ][8587] Running state [ctl02.mcp-pike-odl-ha.local] at time 13:52:12.358461
2018-09-29 13:52:12,358 [salt.state       :1803][INFO    ][8587] Executing state host.present for [ctl02.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,359 [salt.state       :290 ][INFO    ][8587] {'host': 'ctl02.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,359 [salt.state       :1941][INFO    ][8587] Completed state [ctl02.mcp-pike-odl-ha.local] at time 13:52:12.359734 duration_in_ms=1.273
2018-09-29 13:52:12,360 [salt.state       :1770][INFO    ][8587] Running state [ctl03] at time 13:52:12.359981
2018-09-29 13:52:12,360 [salt.state       :1803][INFO    ][8587] Executing state host.present for [ctl03]
2018-09-29 13:52:12,361 [salt.state       :290 ][INFO    ][8587] {'host': 'ctl03'}
2018-09-29 13:52:12,361 [salt.state       :1941][INFO    ][8587] Completed state [ctl03] at time 13:52:12.361257 duration_in_ms=1.277
2018-09-29 13:52:12,361 [salt.state       :1770][INFO    ][8587] Running state [ctl03.mcp-pike-odl-ha.local] at time 13:52:12.361533
2018-09-29 13:52:12,361 [salt.state       :1803][INFO    ][8587] Executing state host.present for [ctl03.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,362 [salt.state       :290 ][INFO    ][8587] {'host': 'ctl03.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,362 [salt.state       :1941][INFO    ][8587] Completed state [ctl03.mcp-pike-odl-ha.local] at time 13:52:12.362801 duration_in_ms=1.268
2018-09-29 13:52:12,363 [salt.state       :1770][INFO    ][8587] Running state [ctl01] at time 13:52:12.363077
2018-09-29 13:52:12,363 [salt.state       :1803][INFO    ][8587] Executing state host.present for [ctl01]
2018-09-29 13:52:12,364 [salt.state       :290 ][INFO    ][8587] {'host': 'ctl01'}
2018-09-29 13:52:12,364 [salt.state       :1941][INFO    ][8587] Completed state [ctl01] at time 13:52:12.364438 duration_in_ms=1.36
2018-09-29 13:52:12,364 [salt.state       :1770][INFO    ][8587] Running state [ctl01.mcp-pike-odl-ha.local] at time 13:52:12.364698
2018-09-29 13:52:12,364 [salt.state       :1803][INFO    ][8587] Executing state host.present for [ctl01.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,365 [salt.state       :290 ][INFO    ][8587] {'host': 'ctl01.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,366 [salt.state       :1941][INFO    ][8587] Completed state [ctl01.mcp-pike-odl-ha.local] at time 13:52:12.366025 duration_in_ms=1.327
2018-09-29 13:52:12,366 [salt.state       :1770][INFO    ][8587] Running state [ctl] at time 13:52:12.366300
2018-09-29 13:52:12,366 [salt.state       :1803][INFO    ][8587] Executing state host.present for [ctl]
2018-09-29 13:52:12,367 [salt.state       :290 ][INFO    ][8587] {'host': 'ctl'}
2018-09-29 13:52:12,367 [salt.state       :1941][INFO    ][8587] Completed state [ctl] at time 13:52:12.367586 duration_in_ms=1.286
2018-09-29 13:52:12,367 [salt.state       :1770][INFO    ][8587] Running state [ctl.mcp-pike-odl-ha.local] at time 13:52:12.367836
2018-09-29 13:52:12,368 [salt.state       :1803][INFO    ][8587] Executing state host.present for [ctl.mcp-pike-odl-ha.local]
2018-09-29 13:52:12,369 [salt.state       :290 ][INFO    ][8587] {'host': 'ctl.mcp-pike-odl-ha.local'}
2018-09-29 13:52:12,369 [salt.state       :1941][INFO    ][8587] Completed state [ctl.mcp-pike-odl-ha.local] at time 13:52:12.369160 duration_in_ms=1.324
2018-09-29 13:52:12,875 [salt.state       :1770][INFO    ][8587] Running state [linux_network_bridge_pkgs] at time 13:52:12.875926
2018-09-29 13:52:12,876 [salt.state       :1803][INFO    ][8587] Executing state pkg.installed for [linux_network_bridge_pkgs]
2018-09-29 13:52:12,876 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 13:52:13,197 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['apt-cache', '-q', 'policy', 'openvswitch-switch'] in directory '/root'
2018-09-29 13:52:13,252 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['apt-cache', '-q', 'policy', 'bridge-utils'] in directory '/root'
2018-09-29 13:52:13,315 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-29 13:52:14,802 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 13:52:14,818 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'openvswitch-switch', 'bridge-utils'] in directory '/root'
2018-09-29 13:52:18,517 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 13:52:18,542 [salt.state       :290 ][INFO    ][8587] Made the following changes:
'openvswitch-switch' changed from 'absent' to '2.8.1-0ubuntu0.17.10.2~cloud0'
'bridge-utils' changed from 'absent' to '1.5-9ubuntu1'
'openvswitch-common' changed from 'absent' to '2.8.1-0ubuntu0.17.10.2~cloud0'

2018-09-29 13:52:18,554 [salt.state       :905 ][INFO    ][8587] Loading fresh modules for state activity
2018-09-29 13:52:18,583 [salt.state       :1941][INFO    ][8587] Completed state [linux_network_bridge_pkgs] at time 13:52:18.583615 duration_in_ms=5707.69
2018-09-29 13:52:18,586 [salt.state       :1770][INFO    ][8587] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 13:52:18.586477
2018-09-29 13:52:18,586 [salt.state       :1803][INFO    ][8587] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-09-29 13:52:18,589 [salt.state       :290 ][INFO    ][8587] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-09-29 13:52:18,589 [salt.state       :1941][INFO    ][8587] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 13:52:18.589729 duration_in_ms=3.251
2018-09-29 13:52:18,596 [salt.state       :1770][INFO    ][8587] Running state [ens2f1.1000] at time 13:52:18.596766
2018-09-29 13:52:18,597 [salt.state       :1803][INFO    ][8587] Executing state network.managed for [ens2f1.1000]
2018-09-29 13:52:18,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['ifup', 'ens2f1.1000'] in directory '/root'
2018-09-29 13:52:19,494 [salt.state       :290 ][INFO    ][8587] {'interface': 'Added network interface.', 'status': 'Interface ens2f1.1000 is up'}
2018-09-29 13:52:19,494 [salt.state       :1941][INFO    ][8587] Completed state [ens2f1.1000] at time 13:52:19.494876 duration_in_ms=898.11
2018-09-29 13:52:19,495 [salt.state       :1770][INFO    ][8587] Running state [br-mesh] at time 13:52:19.495857
2018-09-29 13:52:19,496 [salt.state       :1803][INFO    ][8587] Executing state network.managed for [br-mesh]
2018-09-29 13:52:19,968 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 13:52:19,981 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'bridge-utils'] in directory '/root'
2018-09-29 13:52:20,257 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 13:52:20,300 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['ifup', 'br-mesh'] in directory '/root'
2018-09-29 13:52:20,911 [salt.minion      :1307][INFO    ][8501] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929135220894966
2018-09-29 13:52:20,920 [salt.minion      :1431][INFO    ][10352] Starting a new job with PID 10352
2018-09-29 13:52:20,931 [salt.minion      :1708][INFO    ][10352] Returning information for job: 20180929135220894966
2018-09-29 13:52:21,262 [salt.state       :290 ][INFO    ][8587] {'interface': 'Added network interface.', 'status': 'Interface br-mesh is up'}
2018-09-29 13:52:21,262 [salt.state       :1941][INFO    ][8587] Completed state [br-mesh] at time 13:52:21.262407 duration_in_ms=1766.55
2018-09-29 13:52:21,263 [salt.state       :1770][INFO    ][8587] Running state [ens2f0.81] at time 13:52:21.263819
2018-09-29 13:52:21,264 [salt.state       :1803][INFO    ][8587] Executing state network.managed for [ens2f0.81]
2018-09-29 13:52:21,282 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['ifup', 'ens2f0.81'] in directory '/root'
2018-09-29 13:52:22,030 [salt.state       :290 ][INFO    ][8587] {'interface': 'Added network interface.', 'status': 'Interface ens2f0.81 is up'}
2018-09-29 13:52:22,031 [salt.state       :1941][INFO    ][8587] Completed state [ens2f0.81] at time 13:52:22.030990 duration_in_ms=767.171
2018-09-29 13:52:22,031 [salt.state       :1770][INFO    ][8587] Running state [br-ctl] at time 13:52:22.031899
2018-09-29 13:52:22,032 [salt.state       :1803][INFO    ][8587] Executing state network.managed for [br-ctl]
2018-09-29 13:52:22,039 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 13:52:22,053 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'bridge-utils'] in directory '/root'
2018-09-29 13:52:22,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 13:52:22,442 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['ifup', 'br-ctl'] in directory '/root'
2018-09-29 13:52:23,392 [salt.state       :290 ][INFO    ][8587] {'interface': 'Added network interface.', 'status': 'Interface br-ctl is up'}
2018-09-29 13:52:23,392 [salt.state       :1941][INFO    ][8587] Completed state [br-ctl] at time 13:52:23.392300 duration_in_ms=1360.4
2018-09-29 13:52:23,393 [salt.state       :1770][INFO    ][8587] Running state [/etc/network/interfaces] at time 13:52:23.393356
2018-09-29 13:52:23,393 [salt.state       :1803][INFO    ][8587] Executing state file.prepend for [/etc/network/interfaces]
2018-09-29 13:52:23,396 [salt.state       :290 ][INFO    ][8587] File changed:
--- 
+++ 
@@ -1,3 +1,6 @@
+source /etc/network/interfaces.d/*
+# Workaround for Upstream-Bug: https://github.com/saltstack/salt/issues/40262
+source /etc/network/interfaces.u/*
 auto lo
 iface lo inet loopback
 auto ens2f1.1000

2018-09-29 13:52:23,396 [salt.state       :1941][INFO    ][8587] Completed state [/etc/network/interfaces] at time 13:52:23.396904 duration_in_ms=3.548
2018-09-29 13:52:23,397 [salt.state       :1770][INFO    ][8587] Running state [/etc/network/interfaces.u/ifcfg-ens2f0.80] at time 13:52:23.397105
2018-09-29 13:52:23,397 [salt.state       :1803][INFO    ][8587] Executing state file.managed for [/etc/network/interfaces.u/ifcfg-ens2f0.80]
2018-09-29 13:52:23,420 [salt.fileclient  :1215][INFO    ][8587] Fetching file from saltenv 'base', ** done ** 'linux/files/ovs_port'
2018-09-29 13:52:23,433 [salt.state       :290 ][INFO    ][8587] File changed:
New file
2018-09-29 13:52:23,433 [salt.state       :1941][INFO    ][8587] Completed state [/etc/network/interfaces.u/ifcfg-ens2f0.80] at time 13:52:23.433846 duration_in_ms=36.731
2018-09-29 13:52:23,434 [salt.state       :1770][INFO    ][8587] Running state [/etc/network/interfaces] at time 13:52:23.434035
2018-09-29 13:52:23,434 [salt.state       :1803][INFO    ][8587] Executing state file.replace for [/etc/network/interfaces]
2018-09-29 13:52:23,435 [salt.state       :290 ][INFO    ][8587] No changes needed to be made
2018-09-29 13:52:23,435 [salt.state       :1941][INFO    ][8587] Completed state [/etc/network/interfaces] at time 13:52:23.435358 duration_in_ms=1.323
2018-09-29 13:52:23,435 [salt.state       :1770][INFO    ][8587] Running state [/etc/network/interfaces] at time 13:52:23.435535
2018-09-29 13:52:23,435 [salt.state       :1803][INFO    ][8587] Executing state file.replace for [/etc/network/interfaces]
2018-09-29 13:52:23,436 [salt.state       :290 ][INFO    ][8587] No changes needed to be made
2018-09-29 13:52:23,436 [salt.state       :1941][INFO    ][8587] Completed state [/etc/network/interfaces] at time 13:52:23.436832 duration_in_ms=1.297
2018-09-29 13:52:23,441 [salt.state       :1770][INFO    ][8587] Running state [br-floating] at time 13:52:23.441759
2018-09-29 13:52:23,441 [salt.state       :1803][INFO    ][8587] Executing state openvswitch_bridge.present for [br-floating]
2018-09-29 13:52:23,442 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command 'ovs-vsctl br-exists br-floating' in directory '/root'
2018-09-29 13:52:23,451 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][8587] Command '['ovs-vsctl', 'br-exists', 'br-floating']' failed with return code: 2
2018-09-29 13:52:23,452 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][8587] retcode: 2
2018-09-29 13:52:23,452 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command 'ovs-vsctl --may-exist add-br br-floating' in directory '/root'
2018-09-29 13:52:23,735 [salt.state       :290 ][INFO    ][8587] Made the following changes:
'br-floating' changed from 'Bridge br-floating does not exist.' to 'Bridge br-floating created'

2018-09-29 13:52:23,736 [salt.state       :1941][INFO    ][8587] Completed state [br-floating] at time 13:52:23.735953 duration_in_ms=294.194
2018-09-29 13:52:23,736 [salt.state       :1770][INFO    ][8587] Running state [/etc/network/interfaces] at time 13:52:23.736310
2018-09-29 13:52:23,736 [salt.state       :1803][INFO    ][8587] Executing state file.prepend for [/etc/network/interfaces]
2018-09-29 13:52:23,738 [salt.state       :290 ][INFO    ][8587] File /etc/network/interfaces is in correct state
2018-09-29 13:52:23,738 [salt.state       :1941][INFO    ][8587] Completed state [/etc/network/interfaces] at time 13:52:23.738407 duration_in_ms=2.098
2018-09-29 13:52:23,740 [salt.state       :1770][INFO    ][8587] Running state [ifup ens2f0.80] at time 13:52:23.740904
2018-09-29 13:52:23,741 [salt.state       :1803][INFO    ][8587] Executing state cmd.run for [ifup ens2f0.80]
2018-09-29 13:52:23,741 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command 'ip link show ens2f0.80 | grep -q '\<UP\>'' in directory '/root'
2018-09-29 13:52:23,752 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command 'ifup ens2f0.80' in directory '/root'
2018-09-29 13:52:23,973 [salt.state       :290 ][INFO    ][8587] {'pid': 11009, 'retcode': 0, 'stderr': '/etc/network/if-pre-up.d/mtuipv6: line 9: /sys/class/net/ens2f0.80/mtu: No such file or directory\n/etc/network/if-pre-up.d/mtuipv6: line 10: /proc/sys/net/ipv6/conf/ens2f0.80/mtu: No such file or directory\novs-vsctl: Error detected while setting up \'ens2f0.80\': could not open network device ens2f0.80 (No such device).  See ovs-vswitchd log for details.\novs-vsctl: The default log directory is "/var/log/openvswitch".\nens2f0.80: ERROR while getting interface flags: No such device\n/etc/network/if-up.d/mtuipv6: line 9: /run/network/ens2f0.80_dev.mtu: No such file or directory\n/etc/network/if-up.d/mtuipv6: line 11: /run/network/ens2f0.80_ipv6.mtu: No such file or directory\n/etc/network/if-up.d/mtuipv6: line 28: [: -lt: unary operator expected', 'stdout': 'Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config\nAdded VLAN with VID == 80 to IF -:ens2f0:-'}
2018-09-29 13:52:23,974 [salt.state       :1941][INFO    ][8587] Completed state [ifup ens2f0.80] at time 13:52:23.974081 duration_in_ms=233.177
2018-09-29 13:52:23,975 [salt.state       :1770][INFO    ][8587] Running state [/etc/network/interfaces.u/ifcfg-br-floating] at time 13:52:23.975055
2018-09-29 13:52:23,975 [salt.state       :1803][INFO    ][8587] Executing state file.managed for [/etc/network/interfaces.u/ifcfg-br-floating]
2018-09-29 13:52:23,996 [salt.fileclient  :1215][INFO    ][8587] Fetching file from saltenv 'base', ** done ** 'linux/files/ovs_bridge'
2018-09-29 13:52:24,006 [salt.state       :290 ][INFO    ][8587] File changed:
New file
2018-09-29 13:52:24,006 [salt.state       :1941][INFO    ][8587] Completed state [/etc/network/interfaces.u/ifcfg-br-floating] at time 13:52:24.006573 duration_in_ms=31.518
2018-09-29 13:52:24,006 [salt.state       :1770][INFO    ][8587] Running state [/etc/network/interfaces] at time 13:52:24.006781
2018-09-29 13:52:24,007 [salt.state       :1803][INFO    ][8587] Executing state file.prepend for [/etc/network/interfaces]
2018-09-29 13:52:24,008 [salt.state       :290 ][INFO    ][8587] File /etc/network/interfaces is in correct state
2018-09-29 13:52:24,008 [salt.state       :1941][INFO    ][8587] Completed state [/etc/network/interfaces] at time 13:52:24.008311 duration_in_ms=1.53
2018-09-29 13:52:24,009 [salt.state       :1770][INFO    ][8587] Running state [ifup br-floating] at time 13:52:24.009921
2018-09-29 13:52:24,010 [salt.state       :1803][INFO    ][8587] Executing state cmd.run for [ifup br-floating]
2018-09-29 13:52:24,010 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command 'ip link show br-floating | grep -q '\<UP\>'' in directory '/root'
2018-09-29 13:52:24,019 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command 'ifup br-floating' in directory '/root'
2018-09-29 13:52:24,215 [salt.state       :290 ][INFO    ][8587] {'pid': 11211, 'retcode': 0, 'stderr': 'ifup: interface ens2f0.80 already configured', 'stdout': ''}
2018-09-29 13:52:24,216 [salt.state       :1941][INFO    ][8587] Completed state [ifup br-floating] at time 13:52:24.216251 duration_in_ms=206.33
2018-09-29 13:52:24,216 [salt.state       :1770][INFO    ][8587] Running state [ovs-vsctl add-port br-floating ens2f0.80] at time 13:52:24.216587
2018-09-29 13:52:24,216 [salt.state       :1803][INFO    ][8587] Executing state cmd.run for [ovs-vsctl add-port br-floating ens2f0.80]
2018-09-29 13:52:24,217 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command 'ovs-vsctl show | grep ens2f0.80' in directory '/root'
2018-09-29 13:52:24,227 [salt.state       :290 ][INFO    ][8587] unless execution succeeded
2018-09-29 13:52:24,227 [salt.state       :1941][INFO    ][8587] Completed state [ovs-vsctl add-port br-floating ens2f0.80] at time 13:52:24.227312 duration_in_ms=10.725
2018-09-29 13:52:24,227 [salt.state       :1770][INFO    ][8587] Running state [br-floating] at time 13:52:24.227591
2018-09-29 13:52:24,227 [salt.state       :1803][INFO    ][8587] Executing state network.routes for [br-floating]
2018-09-29 13:52:24,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-09-29 13:52:24,244 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'networking.service'] in directory '/root'
2018-09-29 13:52:27,317 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'networking.service'] in directory '/root'
2018-09-29 13:52:28,712 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][8587] Command '['systemd-run', '--scope', 'systemctl', 'start', 'networking.service']' failed with return code: 1
2018-09-29 13:52:28,713 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][8587] stderr: Running scope as unit run-r0a9b8f93df2f4469a5775a136772dea0.scope.
Job for networking.service failed because the control process exited with error code. See "systemctl status networking.service" and "journalctl -xe" for details.
2018-09-29 13:52:28,713 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][8587] retcode: 1
2018-09-29 13:52:28,714 [salt.state       :292 ][ERROR   ][8587] An exception occurred in this state: Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/salt/state.py", line 1879, in call
    **cdata['kwargs'])
  File "/usr/lib/python2.7/dist-packages/salt/loader.py", line 1826, in wrapper
    return f(*args, **kwargs)
  File "/usr/lib/python2.7/dist-packages/salt/states/network.py", line 526, in routes
    __salt__['ip.apply_network_settings'](**kwargs)
  File "/usr/lib/python2.7/dist-packages/salt/modules/debian_ip.py", line 1977, in apply_network_settings
    res = stop and __salt__['service.start']('networking')
  File "/usr/lib/python2.7/dist-packages/salt/modules/systemd.py", line 808, in start
    raise CommandExecutionError(_strip_scope(ret['stderr']))
CommandExecutionError: Running scope as unit run-r0a9b8f93df2f4469a5775a136772dea0.scope.
Job for networking.service failed because the control process exited with error code. See "systemctl status networking.service" and "journalctl -xe" for details.

2018-09-29 13:52:28,715 [salt.state       :1941][INFO    ][8587] Completed state [br-floating] at time 13:52:28.714996 duration_in_ms=4487.404
2018-09-29 13:52:28,715 [salt.state       :1770][INFO    ][8587] Running state [eno1] at time 13:52:28.715352
2018-09-29 13:52:28,715 [salt.state       :1803][INFO    ][8587] Executing state network.managed for [eno1]
2018-09-29 13:52:28,734 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['ifdown', 'eno1'] in directory '/root'
2018-09-29 13:52:28,740 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['ifup', 'eno1'] in directory '/root'
2018-09-29 13:52:29,070 [salt.state       :290 ][INFO    ][8587] {'interface': 'Added network interface.', 'status': 'Interface eno1 restart to validate'}
2018-09-29 13:52:29,070 [salt.state       :1941][INFO    ][8587] Completed state [eno1] at time 13:52:29.070916 duration_in_ms=355.563
2018-09-29 13:52:29,071 [salt.state       :1770][INFO    ][8587] Running state [ens2f0] at time 13:52:29.071222
2018-09-29 13:52:29,071 [salt.state       :1803][INFO    ][8587] Executing state network.managed for [ens2f0]
2018-09-29 13:52:29,093 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['ifdown', 'ens2f0'] in directory '/root'
2018-09-29 13:52:29,100 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['ifup', 'ens2f0'] in directory '/root'
2018-09-29 13:52:29,194 [salt.state       :290 ][INFO    ][8587] {'interface': 'Added network interface.', 'status': 'Interface ens2f0 restart to validate'}
2018-09-29 13:52:29,195 [salt.state       :1941][INFO    ][8587] Completed state [ens2f0] at time 13:52:29.195226 duration_in_ms=124.004
2018-09-29 13:52:29,195 [salt.state       :1770][INFO    ][8587] Running state [ens2f1] at time 13:52:29.195542
2018-09-29 13:52:29,195 [salt.state       :1803][INFO    ][8587] Executing state network.managed for [ens2f1]
2018-09-29 13:52:29,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['ifdown', 'ens2f1'] in directory '/root'
2018-09-29 13:52:29,221 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8587] Executing command ['ifup', 'ens2f1'] in directory '/root'
2018-09-29 13:52:29,318 [salt.state       :290 ][INFO    ][8587] {'interface': 'Added network interface.', 'status': 'Interface ens2f1 restart to validate'}
2018-09-29 13:52:29,319 [salt.state       :1941][INFO    ][8587] Completed state [ens2f1] at time 13:52:29.319000 duration_in_ms=123.458
2018-09-29 13:52:29,319 [salt.state       :1770][INFO    ][8587] Running state [/etc/network/interfaces] at time 13:52:29.319309
2018-09-29 13:52:29,319 [salt.state       :1803][INFO    ][8587] Executing state file.prepend for [/etc/network/interfaces]
2018-09-29 13:52:29,321 [salt.state       :290 ][INFO    ][8587] File changed:
--- 
+++ 
@@ -1,3 +1,6 @@
+source /etc/network/interfaces.d/*
+# Workaround for Upstream-Bug: https://github.com/saltstack/salt/issues/40262
+source /etc/network/interfaces.u/*
 auto lo
 iface lo inet loopback
 auto ens2f1.1000

2018-09-29 13:52:29,321 [salt.state       :1941][INFO    ][8587] Completed state [/etc/network/interfaces] at time 13:52:29.321628 duration_in_ms=2.319
2018-09-29 13:52:29,321 [salt.state       :1770][INFO    ][8587] Running state [/etc/profile.d/proxy.sh] at time 13:52:29.321838
2018-09-29 13:52:29,322 [salt.state       :1803][INFO    ][8587] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-09-29 13:52:29,322 [salt.state       :290 ][INFO    ][8587] File /etc/profile.d/proxy.sh is not present
2018-09-29 13:52:29,322 [salt.state       :1941][INFO    ][8587] Completed state [/etc/profile.d/proxy.sh] at time 13:52:29.322433 duration_in_ms=0.595
2018-09-29 13:52:29,322 [salt.state       :1770][INFO    ][8587] Running state [/etc/apt/apt.conf.d/95proxies] at time 13:52:29.322611
2018-09-29 13:52:29,322 [salt.state       :1803][INFO    ][8587] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-09-29 13:52:29,323 [salt.state       :290 ][INFO    ][8587] File /etc/apt/apt.conf.d/95proxies is not present
2018-09-29 13:52:29,323 [salt.state       :1941][INFO    ][8587] Completed state [/etc/apt/apt.conf.d/95proxies] at time 13:52:29.323173 duration_in_ms=0.562
2018-09-29 13:52:29,325 [salt.minion      :1708][INFO    ][8587] Returning information for job: 20180929135210828690
2018-09-29 13:52:30,475 [salt.minion      :1307][INFO    ][8501] User sudo_ubuntu Executing command test.ping with jid 20180929135230462892
2018-09-29 13:52:30,486 [salt.minion      :1431][INFO    ][13340] Starting a new job with PID 13340
2018-09-29 13:52:30,498 [salt.minion      :1708][INFO    ][13340] Returning information for job: 20180929135230462892
2018-09-29 13:52:31,232 [salt.minion      :1307][INFO    ][8501] User sudo_ubuntu Executing command file.write with jid 20180929135231215607
2018-09-29 13:52:31,241 [salt.minion      :1431][INFO    ][13345] Starting a new job with PID 13345
2018-09-29 13:52:31,250 [salt.minion      :1708][INFO    ][13345] Returning information for job: 20180929135231215607
2018-09-29 13:52:31,942 [salt.minion      :1307][INFO    ][8501] User sudo_ubuntu Executing command system.reboot with jid 20180929135231927604
2018-09-29 13:52:31,951 [salt.minion      :1431][INFO    ][13350] Starting a new job with PID 13350
2018-09-29 13:52:31,955 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][13350] Executing command ['shutdown', '-r', 'now'] in directory '/root'
2018-09-29 13:52:31,995 [salt.utils.parsers:1051][WARNING ][8501] Minion received a SIGTERM. Exiting.
2018-09-29 13:52:31,995 [salt.cli.daemons :82  ][INFO    ][8501] Shutting down the Salt Minion
2018-09-29 13:52:33,096 [salt.minion      :1708][INFO    ][13350] Returning information for job: 20180929135231927604
2018-09-29 13:55:17,610 [salt.cli.daemons :293 ][INFO    ][3775] Setting up the Salt Minion "cmp002.mcp-pike-odl-ha.local"
2018-09-29 13:55:17,749 [salt.cli.daemons :82  ][INFO    ][3775] Starting up the Salt Minion
2018-09-29 13:55:17,749 [salt.utils.event :1017][INFO    ][3775] Starting pull socket on /var/run/salt/minion/minion_event_a114ed337d_pull.ipc
2018-09-29 13:55:18,429 [salt.minion      :976 ][INFO    ][3775] Creating minion process manager
2018-09-29 13:55:19,739 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3775] Executing command ['date', '+%z'] in directory '/root'
2018-09-29 13:55:19,757 [salt.utils.schedule:568 ][INFO    ][3775] Updating job settings for scheduled job: __mine_interval
2018-09-29 13:55:19,758 [salt.minion      :1107][INFO    ][3775] Added mine.update to scheduler
2018-09-29 13:55:19,763 [salt.minion      :1965][INFO    ][3775] Minion is starting as user 'root'
2018-09-29 13:55:19,789 [salt.minion      :2324][INFO    ][3775] Minion is ready to receive requests!
2018-09-29 13:55:38,516 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command test.ping with jid 20180929135538502227
2018-09-29 13:55:38,524 [salt.minion      :1431][INFO    ][3892] Starting a new job with PID 3892
2018-09-29 13:55:38,543 [salt.minion      :1708][INFO    ][3892] Returning information for job: 20180929135538502227
2018-09-29 13:56:09,289 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command test.ping with jid 20180929135609275647
2018-09-29 13:56:09,297 [salt.minion      :1431][INFO    ][3902] Starting a new job with PID 3902
2018-09-29 13:56:09,308 [salt.minion      :1708][INFO    ][3902] Returning information for job: 20180929135609275647
2018-09-29 13:56:40,062 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command test.ping with jid 20180929135640048940
2018-09-29 13:56:40,069 [salt.minion      :1431][INFO    ][3908] Starting a new job with PID 3908
2018-09-29 13:56:40,081 [salt.minion      :1708][INFO    ][3908] Returning information for job: 20180929135640048940
2018-09-29 13:57:10,850 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command test.ping with jid 20180929135710836027
2018-09-29 13:57:10,857 [salt.minion      :1431][INFO    ][3913] Starting a new job with PID 3913
2018-09-29 13:57:10,869 [salt.minion      :1708][INFO    ][3913] Returning information for job: 20180929135710836027
2018-09-29 13:57:11,557 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command state.apply with jid 20180929135711543357
2018-09-29 13:57:11,564 [salt.minion      :1431][INFO    ][3918] Starting a new job with PID 3918
2018-09-29 13:57:15,218 [salt.state       :905 ][INFO    ][3918] Loading fresh modules for state activity
2018-09-29 13:57:15,285 [salt.fileclient  :1215][INFO    ][3918] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-09-29 13:57:18,174 [salt.fileclient  :1215][INFO    ][3918] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-09-29 13:57:18,287 [salt.fileclient  :1215][INFO    ][3918] Fetching file from saltenv 'base', ** done ** 'linux/storage/lvm.sls'
2018-09-29 13:57:18,408 [salt.fileclient  :1215][INFO    ][3918] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-09-29 13:57:18,430 [salt.fileclient  :1215][INFO    ][3918] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-09-29 13:57:18,472 [salt.fileclient  :1215][INFO    ][3918] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-09-29 13:57:18,515 [salt.state       :1770][INFO    ][3918] Running state [/etc/environment] at time 13:57:18.515310
2018-09-29 13:57:18,515 [salt.state       :1803][INFO    ][3918] Executing state file.blockreplace for [/etc/environment]
2018-09-29 13:57:18,516 [salt.state       :290 ][INFO    ][3918] No changes needed to be made
2018-09-29 13:57:18,516 [salt.state       :1941][INFO    ][3918] Completed state [/etc/environment] at time 13:57:18.516345 duration_in_ms=1.036
2018-09-29 13:57:18,516 [salt.state       :1770][INFO    ][3918] Running state [/etc/profile.d] at time 13:57:18.516560
2018-09-29 13:57:18,516 [salt.state       :1803][INFO    ][3918] Executing state file.directory for [/etc/profile.d]
2018-09-29 13:57:18,518 [salt.state       :290 ][INFO    ][3918] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-09-29 13:57:18,518 [salt.state       :1941][INFO    ][3918] Completed state [/etc/profile.d] at time 13:57:18.518454 duration_in_ms=1.894
2018-09-29 13:57:18,519 [salt.state       :1770][INFO    ][3918] Running state [fake_linux_system_at] at time 13:57:18.519286
2018-09-29 13:57:18,519 [salt.state       :1803][INFO    ][3918] Executing state test.nop for [fake_linux_system_at]
2018-09-29 13:57:18,519 [salt.state       :290 ][INFO    ][3918] Success!
2018-09-29 13:57:18,519 [salt.state       :1941][INFO    ][3918] Completed state [fake_linux_system_at] at time 13:57:18.519858 duration_in_ms=0.571
2018-09-29 13:57:18,520 [salt.state       :1770][INFO    ][3918] Running state [fake_linux_system_cron] at time 13:57:18.520043
2018-09-29 13:57:18,520 [salt.state       :1803][INFO    ][3918] Executing state test.nop for [fake_linux_system_cron]
2018-09-29 13:57:18,520 [salt.state       :290 ][INFO    ][3918] Success!
2018-09-29 13:57:18,520 [salt.state       :1941][INFO    ][3918] Completed state [fake_linux_system_cron] at time 13:57:18.520577 duration_in_ms=0.533
2018-09-29 13:57:19,177 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 13:57:19.177785
2018-09-29 13:57:19,178 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-09-29 13:57:19,204 [salt.state       :290 ][INFO    ][3918] File /etc/apt/apt.conf.d/99prefer_ipv4-salt is in the correct state
2018-09-29 13:57:19,204 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 13:57:19.204393 duration_in_ms=26.608
2018-09-29 13:57:19,204 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 13:57:19.204602
2018-09-29 13:57:19,204 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-09-29 13:57:19,224 [salt.state       :290 ][INFO    ][3918] File /etc/apt/apt.conf.d/99allow_downgrades-salt is in the correct state
2018-09-29 13:57:19,224 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 13:57:19.224382 duration_in_ms=19.78
2018-09-29 13:57:19,226 [salt.state       :1770][INFO    ][3918] Running state [linux_repo_prereq_pkgs] at time 13:57:19.226063
2018-09-29 13:57:19,226 [salt.state       :1803][INFO    ][3918] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-09-29 13:57:19,226 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 13:57:19,582 [salt.state       :290 ][INFO    ][3918] All specified packages are already installed
2018-09-29 13:57:19,582 [salt.state       :1941][INFO    ][3918] Completed state [linux_repo_prereq_pkgs] at time 13:57:19.582705 duration_in_ms=356.642
2018-09-29 13:57:19,583 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 13:57:19.582976
2018-09-29 13:57:19,583 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/apt/apt.conf.d/99proxies-salt]
2018-09-29 13:57:19,606 [salt.state       :290 ][INFO    ][3918] File /etc/apt/apt.conf.d/99proxies-salt is in the correct state
2018-09-29 13:57:19,607 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 13:57:19.607110 duration_in_ms=24.134
2018-09-29 13:57:19,607 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/apt.conf.d/99proxies-salt-glusterfs-ppa] at time 13:57:19.607333
2018-09-29 13:57:19,607 [salt.state       :1803][INFO    ][3918] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-glusterfs-ppa]
2018-09-29 13:57:19,607 [salt.state       :290 ][INFO    ][3918] File /etc/apt/apt.conf.d/99proxies-salt-glusterfs-ppa is not present
2018-09-29 13:57:19,608 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/apt.conf.d/99proxies-salt-glusterfs-ppa] at time 13:57:19.607986 duration_in_ms=0.654
2018-09-29 13:57:19,608 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/preferences.d/glusterfs-ppa] at time 13:57:19.608179
2018-09-29 13:57:19,608 [salt.state       :1803][INFO    ][3918] Executing state file.absent for [/etc/apt/preferences.d/glusterfs-ppa]
2018-09-29 13:57:19,608 [salt.state       :290 ][INFO    ][3918] File /etc/apt/preferences.d/glusterfs-ppa is not present
2018-09-29 13:57:19,608 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/preferences.d/glusterfs-ppa] at time 13:57:19.608737 duration_in_ms=0.558
2018-09-29 13:57:19,616 [salt.state       :1770][INFO    ][3918] Running state [apt-key adv --keyserver keyserver.ubuntu.com --recv 3FE869A9] at time 13:57:19.616086
2018-09-29 13:57:19,616 [salt.state       :1803][INFO    ][3918] Executing state cmd.run for [apt-key adv --keyserver keyserver.ubuntu.com --recv 3FE869A9]
2018-09-29 13:57:19,616 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'test -e /etc/apt/sources.list.d/glusterfs-ppa.list' in directory '/root'
2018-09-29 13:57:19,622 [salt.state       :290 ][INFO    ][3918] unless execution succeeded
2018-09-29 13:57:19,622 [salt.state       :1941][INFO    ][3918] Completed state [apt-key adv --keyserver keyserver.ubuntu.com --recv 3FE869A9] at time 13:57:19.622247 duration_in_ms=6.16
2018-09-29 13:57:19,625 [salt.state       :1770][INFO    ][3918] Running state [deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main] at time 13:57:19.625290
2018-09-29 13:57:19,625 [salt.state       :1803][INFO    ][3918] Executing state pkgrepo.managed for [deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main]
2018-09-29 13:57:19,728 [salt.state       :290 ][INFO    ][3918] Configured package repo 'deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main'
2018-09-29 13:57:19,728 [salt.state       :1941][INFO    ][3918] Completed state [deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main] at time 13:57:19.728722 duration_in_ms=103.431
2018-09-29 13:57:19,728 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/apt.conf.d/99proxies-salt-mk_openstack] at time 13:57:19.728952
2018-09-29 13:57:19,729 [salt.state       :1803][INFO    ][3918] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mk_openstack]
2018-09-29 13:57:19,729 [salt.state       :290 ][INFO    ][3918] File /etc/apt/apt.conf.d/99proxies-salt-mk_openstack is not present
2018-09-29 13:57:19,729 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mk_openstack] at time 13:57:19.729596 duration_in_ms=0.631
2018-09-29 13:57:19,729 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/preferences.d/mk_openstack] at time 13:57:19.729784
2018-09-29 13:57:19,729 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/apt/preferences.d/mk_openstack]
2018-09-29 13:57:19,831 [salt.state       :290 ][INFO    ][3918] File /etc/apt/preferences.d/mk_openstack is in the correct state
2018-09-29 13:57:19,832 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/preferences.d/mk_openstack] at time 13:57:19.831992 duration_in_ms=102.207
2018-09-29 13:57:19,834 [salt.state       :1770][INFO    ][3918] Running state [deb [arch=amd64] http://apt.mirantis.com/xenial/ nightly pike] at time 13:57:19.834468
2018-09-29 13:57:19,834 [salt.state       :1803][INFO    ][3918] Executing state pkgrepo.managed for [deb [arch=amd64] http://apt.mirantis.com/xenial/ nightly pike]
2018-09-29 13:57:19,867 [salt.state       :290 ][INFO    ][3918] Package repo 'deb [arch=amd64] http://apt.mirantis.com/xenial/ nightly pike' already configured
2018-09-29 13:57:19,868 [salt.state       :1941][INFO    ][3918] Completed state [deb [arch=amd64] http://apt.mirantis.com/xenial/ nightly pike] at time 13:57:19.868244 duration_in_ms=33.776
2018-09-29 13:57:19,868 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca-staging] at time 13:57:19.868480
2018-09-29 13:57:19,868 [salt.state       :1803][INFO    ][3918] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca-staging]
2018-09-29 13:57:19,869 [salt.state       :290 ][INFO    ][3918] File /etc/apt/apt.conf.d/99proxies-salt-uca-staging is not present
2018-09-29 13:57:19,869 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca-staging] at time 13:57:19.869269 duration_in_ms=0.789
2018-09-29 13:57:19,869 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/preferences.d/uca-staging] at time 13:57:19.869474
2018-09-29 13:57:19,869 [salt.state       :1803][INFO    ][3918] Executing state file.absent for [/etc/apt/preferences.d/uca-staging]
2018-09-29 13:57:19,869 [salt.state       :290 ][INFO    ][3918] File /etc/apt/preferences.d/uca-staging is not present
2018-09-29 13:57:19,870 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/preferences.d/uca-staging] at time 13:57:19.870030 duration_in_ms=0.556
2018-09-29 13:57:19,875 [salt.state       :1770][INFO    ][3918] Running state [apt-key adv --keyserver keyserver.ubuntu.com --recv 9F68104E] at time 13:57:19.875100
2018-09-29 13:57:19,875 [salt.state       :1803][INFO    ][3918] Executing state cmd.run for [apt-key adv --keyserver keyserver.ubuntu.com --recv 9F68104E]
2018-09-29 13:57:19,875 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'test -e /etc/apt/sources.list.d/uca-staging.list' in directory '/root'
2018-09-29 13:57:19,880 [salt.state       :290 ][INFO    ][3918] unless execution succeeded
2018-09-29 13:57:19,880 [salt.state       :1941][INFO    ][3918] Completed state [apt-key adv --keyserver keyserver.ubuntu.com --recv 9F68104E] at time 13:57:19.880861 duration_in_ms=5.761
2018-09-29 13:57:19,883 [salt.state       :1770][INFO    ][3918] Running state [deb http://ppa.launchpad.net/ubuntu-cloud-archive/pike-staging/ubuntu xenial main] at time 13:57:19.883884
2018-09-29 13:57:19,884 [salt.state       :1803][INFO    ][3918] Executing state pkgrepo.managed for [deb http://ppa.launchpad.net/ubuntu-cloud-archive/pike-staging/ubuntu xenial main]
2018-09-29 13:57:19,916 [salt.state       :290 ][INFO    ][3918] Package repo 'deb http://ppa.launchpad.net/ubuntu-cloud-archive/pike-staging/ubuntu xenial main' already configured
2018-09-29 13:57:19,916 [salt.state       :1941][INFO    ][3918] Completed state [deb http://ppa.launchpad.net/ubuntu-cloud-archive/pike-staging/ubuntu xenial main] at time 13:57:19.916221 duration_in_ms=32.336
2018-09-29 13:57:19,916 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 13:57:19.916434
2018-09-29 13:57:19,916 [salt.state       :1803][INFO    ][3918] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-09-29 13:57:19,916 [salt.state       :290 ][INFO    ][3918] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-09-29 13:57:19,917 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 13:57:19.917057 duration_in_ms=0.623
2018-09-29 13:57:19,917 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 13:57:19.917267
2018-09-29 13:57:19,917 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-09-29 13:57:20,015 [salt.state       :290 ][INFO    ][3918] File /etc/apt/preferences.d/mirantis_openstack is in the correct state
2018-09-29 13:57:20,015 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 13:57:20.015797 duration_in_ms=98.53
2018-09-29 13:57:20,018 [salt.state       :1770][INFO    ][3918] Running state [deb http://mirror.fuel-infra.org/mcp-repos/pike/xenial pike main] at time 13:57:20.018301
2018-09-29 13:57:20,018 [salt.state       :1803][INFO    ][3918] Executing state pkgrepo.managed for [deb http://mirror.fuel-infra.org/mcp-repos/pike/xenial pike main]
2018-09-29 13:57:20,474 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.fuel-infra.org/mcp-repos/pike/xenial/archive-mcppike.key'] in directory '/root'
2018-09-29 13:57:20,660 [salt.state       :290 ][INFO    ][3918] Configured package repo 'deb http://mirror.fuel-infra.org/mcp-repos/pike/xenial pike main'
2018-09-29 13:57:20,661 [salt.state       :1941][INFO    ][3918] Completed state [deb http://mirror.fuel-infra.org/mcp-repos/pike/xenial pike main] at time 13:57:20.661153 duration_in_ms=642.852
2018-09-29 13:57:20,661 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 13:57:20.661404
2018-09-29 13:57:20,661 [salt.state       :1803][INFO    ][3918] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-09-29 13:57:20,661 [salt.state       :290 ][INFO    ][3918] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-09-29 13:57:20,662 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 13:57:20.662113 duration_in_ms=0.709
2018-09-29 13:57:20,662 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/preferences.d/uca] at time 13:57:20.662306
2018-09-29 13:57:20,662 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-09-29 13:57:20,764 [salt.state       :290 ][INFO    ][3918] File /etc/apt/preferences.d/uca is in the correct state
2018-09-29 13:57:20,764 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/preferences.d/uca] at time 13:57:20.764566 duration_in_ms=102.26
2018-09-29 13:57:20,769 [salt.state       :1770][INFO    ][3918] Running state [apt-key adv --keyserver keyserver.ubuntu.com --recv EC4926EA] at time 13:57:20.769358
2018-09-29 13:57:20,769 [salt.state       :1803][INFO    ][3918] Executing state cmd.run for [apt-key adv --keyserver keyserver.ubuntu.com --recv EC4926EA]
2018-09-29 13:57:20,770 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'test -e /etc/apt/sources.list.d/uca.list' in directory '/root'
2018-09-29 13:57:20,775 [salt.state       :290 ][INFO    ][3918] unless execution succeeded
2018-09-29 13:57:20,775 [salt.state       :1941][INFO    ][3918] Completed state [apt-key adv --keyserver keyserver.ubuntu.com --recv EC4926EA] at time 13:57:20.775262 duration_in_ms=5.89
2018-09-29 13:57:20,778 [salt.state       :1770][INFO    ][3918] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/pike main] at time 13:57:20.778273
2018-09-29 13:57:20,778 [salt.state       :1803][INFO    ][3918] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/pike main]
2018-09-29 13:57:20,814 [salt.state       :290 ][INFO    ][3918] Package repo 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/pike main' already configured
2018-09-29 13:57:20,814 [salt.state       :1941][INFO    ][3918] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/pike main] at time 13:57:20.814228 duration_in_ms=35.955
2018-09-29 13:57:20,815 [salt.state       :1770][INFO    ][3918] Running state [pkg.refresh_db] at time 13:57:20.815360
2018-09-29 13:57:20,815 [salt.state       :1803][INFO    ][3918] Executing state module.run for [pkg.refresh_db]
2018-09-29 13:57:20,815 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:20,816 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-29 13:57:21,624 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929135721608162
2018-09-29 13:57:21,633 [salt.minion      :1431][INFO    ][4526] Starting a new job with PID 4526
2018-09-29 13:57:21,642 [salt.minion      :1708][INFO    ][4526] Returning information for job: 20180929135721608162
2018-09-29 13:57:24,390 [salt.state       :290 ][INFO    ][3918] {'ret': {'http://apt.mirantis.com/xenial nightly InRelease': None, 'http://ppa.launchpad.net/ubuntu-cloud-archive/pike-staging/ubuntu xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/pike Release': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/pike InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial InRelease': None, 'http://mirror.fuel-infra.org/mcp-repos/pike/xenial pike InRelease': None}}
2018-09-29 13:57:24,390 [salt.state       :1941][INFO    ][3918] Completed state [pkg.refresh_db] at time 13:57:24.390365 duration_in_ms=3575.004
2018-09-29 13:57:24,390 [salt.state       :1770][INFO    ][3918] Running state [linux_extra_packages_latest] at time 13:57:24.390650
2018-09-29 13:57:24,390 [salt.state       :1803][INFO    ][3918] Executing state pkg.latest for [linux_extra_packages_latest]
2018-09-29 13:57:24,404 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['apt-cache', '-q', 'policy', 'python-pymysql'] in directory '/root'
2018-09-29 13:57:24,464 [salt.state       :290 ][INFO    ][3918] Package python-pymysql is already up-to-date
2018-09-29 13:57:24,464 [salt.state       :1941][INFO    ][3918] Completed state [linux_extra_packages_latest] at time 13:57:24.464629 duration_in_ms=73.978
2018-09-29 13:57:24,465 [salt.state       :1770][INFO    ][3918] Running state [UTC] at time 13:57:24.465567
2018-09-29 13:57:24,465 [salt.state       :1803][INFO    ][3918] Executing state timezone.system for [UTC]
2018-09-29 13:57:24,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['timedatectl'] in directory '/root'
2018-09-29 13:57:24,503 [salt.state       :290 ][INFO    ][3918] Timezone UTC already set, UTC already set to UTC
2018-09-29 13:57:24,503 [salt.state       :1941][INFO    ][3918] Completed state [UTC] at time 13:57:24.503537 duration_in_ms=37.97
2018-09-29 13:57:24,503 [salt.state       :1770][INFO    ][3918] Running state [/etc/default/grub.d] at time 13:57:24.503758
2018-09-29 13:57:24,503 [salt.state       :1803][INFO    ][3918] Executing state file.directory for [/etc/default/grub.d]
2018-09-29 13:57:24,504 [salt.state       :290 ][INFO    ][3918] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-09-29 13:57:24,504 [salt.state       :1941][INFO    ][3918] Completed state [/etc/default/grub.d] at time 13:57:24.504879 duration_in_ms=1.121
2018-09-29 13:57:24,509 [salt.state       :1770][INFO    ][3918] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 13:57:24.509412
2018-09-29 13:57:24,509 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2018-09-29 13:57:24,510 [salt.state       :290 ][INFO    ][3918] File /etc/default/grub.d/99-custom-settings.cfg is in the correct state
2018-09-29 13:57:24,511 [salt.state       :1941][INFO    ][3918] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 13:57:24.510978 duration_in_ms=1.565
2018-09-29 13:57:24,512 [salt.state       :1770][INFO    ][3918] Running state [/etc/default/grub.d/90-hugepages.cfg] at time 13:57:24.512157
2018-09-29 13:57:24,512 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/default/grub.d/90-hugepages.cfg]
2018-09-29 13:57:24,621 [salt.state       :290 ][INFO    ][3918] File /etc/default/grub.d/90-hugepages.cfg is in the correct state
2018-09-29 13:57:24,621 [salt.state       :1941][INFO    ][3918] Completed state [/etc/default/grub.d/90-hugepages.cfg] at time 13:57:24.621703 duration_in_ms=109.546
2018-09-29 13:57:24,623 [salt.state       :1770][INFO    ][3918] Running state [update-grub] at time 13:57:24.623291
2018-09-29 13:57:24,623 [salt.state       :1803][INFO    ][3918] Executing state cmd.wait for [update-grub]
2018-09-29 13:57:24,623 [salt.state       :290 ][INFO    ][3918] No changes made for update-grub
2018-09-29 13:57:24,623 [salt.state       :1941][INFO    ][3918] Completed state [update-grub] at time 13:57:24.623845 duration_in_ms=0.554
2018-09-29 13:57:24,625 [salt.state       :1770][INFO    ][3918] Running state [/boot/grub/grub.cfg] at time 13:57:24.625138
2018-09-29 13:57:24,625 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/boot/grub/grub.cfg]
2018-09-29 13:57:24,729 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['git', '--version'] in directory '/root'
2018-09-29 13:57:24,913 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2018-09-29 13:57:24,918 [salt.loaded.int.states.file:2150][WARNING ][3918] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-09-29 13:57:24,919 [salt.state       :290 ][INFO    ][3918] File /boot/grub/grub.cfg exists with proper permissions. No changes made.
2018-09-29 13:57:24,919 [salt.state       :1941][INFO    ][3918] Completed state [/boot/grub/grub.cfg] at time 13:57:24.919228 duration_in_ms=294.089
2018-09-29 13:57:24,919 [salt.state       :1770][INFO    ][3918] Running state [nf_conntrack] at time 13:57:24.919494
2018-09-29 13:57:24,919 [salt.state       :1803][INFO    ][3918] Executing state kmod.present for [nf_conntrack]
2018-09-29 13:57:24,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'lsmod' in directory '/root'
2018-09-29 13:57:24,926 [salt.state       :290 ][INFO    ][3918] Kernel module nf_conntrack is already present
2018-09-29 13:57:24,926 [salt.state       :1941][INFO    ][3918] Completed state [nf_conntrack] at time 13:57:24.926941 duration_in_ms=7.447
2018-09-29 13:57:24,927 [salt.state       :1770][INFO    ][3918] Running state [kernel.panic] at time 13:57:24.927176
2018-09-29 13:57:24,927 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [kernel.panic]
2018-09-29 13:57:24,932 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n kernel.panic' in directory '/root'
2018-09-29 13:57:24,937 [salt.state       :290 ][INFO    ][3918] Sysctl value kernel.panic = 60 is already set
2018-09-29 13:57:24,937 [salt.state       :1941][INFO    ][3918] Completed state [kernel.panic] at time 13:57:24.937626 duration_in_ms=10.45
2018-09-29 13:57:24,937 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.tcp_keepalive_probes] at time 13:57:24.937871
2018-09-29 13:57:24,938 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-09-29 13:57:24,938 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.tcp_keepalive_probes' in directory '/root'
2018-09-29 13:57:24,943 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.tcp_keepalive_probes = 8 is already set
2018-09-29 13:57:24,943 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.tcp_keepalive_probes] at time 13:57:24.943315 duration_in_ms=5.443
2018-09-29 13:57:24,943 [salt.state       :1770][INFO    ][3918] Running state [fs.file-max] at time 13:57:24.943559
2018-09-29 13:57:24,943 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [fs.file-max]
2018-09-29 13:57:24,944 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n fs.file-max' in directory '/root'
2018-09-29 13:57:24,948 [salt.state       :290 ][INFO    ][3918] Sysctl value fs.file-max = 124165 is already set
2018-09-29 13:57:24,948 [salt.state       :1941][INFO    ][3918] Completed state [fs.file-max] at time 13:57:24.948883 duration_in_ms=5.323
2018-09-29 13:57:24,949 [salt.state       :1770][INFO    ][3918] Running state [net.core.somaxconn] at time 13:57:24.949126
2018-09-29 13:57:24,949 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.core.somaxconn]
2018-09-29 13:57:24,949 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.core.somaxconn' in directory '/root'
2018-09-29 13:57:24,954 [salt.state       :290 ][INFO    ][3918] Sysctl value net.core.somaxconn = 4096 is already set
2018-09-29 13:57:24,954 [salt.state       :1941][INFO    ][3918] Completed state [net.core.somaxconn] at time 13:57:24.954466 duration_in_ms=5.339
2018-09-29 13:57:24,954 [salt.state       :1770][INFO    ][3918] Running state [vm.dirty_ratio] at time 13:57:24.954708
2018-09-29 13:57:24,954 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [vm.dirty_ratio]
2018-09-29 13:57:24,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n vm.dirty_ratio' in directory '/root'
2018-09-29 13:57:24,959 [salt.state       :290 ][INFO    ][3918] Sysctl value vm.dirty_ratio = 10 is already set
2018-09-29 13:57:24,959 [salt.state       :1941][INFO    ][3918] Completed state [vm.dirty_ratio] at time 13:57:24.959945 duration_in_ms=5.237
2018-09-29 13:57:24,960 [salt.state       :1770][INFO    ][3918] Running state [vm.dirty_background_ratio] at time 13:57:24.960187
2018-09-29 13:57:24,960 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [vm.dirty_background_ratio]
2018-09-29 13:57:24,960 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n vm.dirty_background_ratio' in directory '/root'
2018-09-29 13:57:24,965 [salt.state       :290 ][INFO    ][3918] Sysctl value vm.dirty_background_ratio = 5 is already set
2018-09-29 13:57:24,965 [salt.state       :1941][INFO    ][3918] Completed state [vm.dirty_background_ratio] at time 13:57:24.965430 duration_in_ms=5.243
2018-09-29 13:57:24,965 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.tcp_congestion_control] at time 13:57:24.965675
2018-09-29 13:57:24,965 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-09-29 13:57:24,966 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.tcp_congestion_control' in directory '/root'
2018-09-29 13:57:24,970 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.tcp_congestion_control = yeah is already set
2018-09-29 13:57:24,971 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.tcp_congestion_control] at time 13:57:24.970967 duration_in_ms=5.292
2018-09-29 13:57:24,971 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.tcp_max_syn_backlog] at time 13:57:24.971210
2018-09-29 13:57:24,971 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-09-29 13:57:24,971 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.tcp_max_syn_backlog' in directory '/root'
2018-09-29 13:57:24,976 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.tcp_max_syn_backlog = 8192 is already set
2018-09-29 13:57:24,976 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.tcp_max_syn_backlog] at time 13:57:24.976489 duration_in_ms=5.278
2018-09-29 13:57:24,976 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.tcp_tw_reuse] at time 13:57:24.976751
2018-09-29 13:57:24,977 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-09-29 13:57:24,977 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.tcp_tw_reuse' in directory '/root'
2018-09-29 13:57:24,981 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.tcp_tw_reuse = 1 is already set
2018-09-29 13:57:24,982 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.tcp_tw_reuse] at time 13:57:24.982092 duration_in_ms=5.341
2018-09-29 13:57:24,982 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.tcp_retries2] at time 13:57:24.982337
2018-09-29 13:57:24,982 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-09-29 13:57:24,983 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.tcp_retries2' in directory '/root'
2018-09-29 13:57:24,987 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.tcp_retries2 = 5 is already set
2018-09-29 13:57:24,987 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.tcp_retries2] at time 13:57:24.987611 duration_in_ms=5.274
2018-09-29 13:57:24,987 [salt.state       :1770][INFO    ][3918] Running state [net.core.netdev_max_backlog] at time 13:57:24.987855
2018-09-29 13:57:24,988 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-09-29 13:57:24,988 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.core.netdev_max_backlog' in directory '/root'
2018-09-29 13:57:24,992 [salt.state       :290 ][INFO    ][3918] Sysctl value net.core.netdev_max_backlog = 261144 is already set
2018-09-29 13:57:24,993 [salt.state       :1941][INFO    ][3918] Completed state [net.core.netdev_max_backlog] at time 13:57:24.993136 duration_in_ms=5.281
2018-09-29 13:57:24,993 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.tcp_slow_start_after_idle] at time 13:57:24.993380
2018-09-29 13:57:24,993 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-09-29 13:57:24,994 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.tcp_slow_start_after_idle' in directory '/root'
2018-09-29 13:57:24,998 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.tcp_slow_start_after_idle = 0 is already set
2018-09-29 13:57:24,998 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 13:57:24.998687 duration_in_ms=5.307
2018-09-29 13:57:24,998 [salt.state       :1770][INFO    ][3918] Running state [vm.swappiness] at time 13:57:24.998932
2018-09-29 13:57:24,999 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [vm.swappiness]
2018-09-29 13:57:24,999 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n vm.swappiness' in directory '/root'
2018-09-29 13:57:25,003 [salt.state       :290 ][INFO    ][3918] Sysctl value vm.swappiness = 10 is already set
2018-09-29 13:57:25,004 [salt.state       :1941][INFO    ][3918] Completed state [vm.swappiness] at time 13:57:25.004134 duration_in_ms=5.202
2018-09-29 13:57:25,004 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.tcp_keepalive_intvl] at time 13:57:25.004377
2018-09-29 13:57:25,004 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-09-29 13:57:25,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.tcp_keepalive_intvl' in directory '/root'
2018-09-29 13:57:25,009 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.tcp_keepalive_intvl = 3 is already set
2018-09-29 13:57:25,009 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.tcp_keepalive_intvl] at time 13:57:25.009728 duration_in_ms=5.351
2018-09-29 13:57:25,010 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.neigh.default.gc_thresh1] at time 13:57:25.009969
2018-09-29 13:57:25,010 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-09-29 13:57:25,010 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh1' in directory '/root'
2018-09-29 13:57:25,015 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.neigh.default.gc_thresh1 = 4096 is already set
2018-09-29 13:57:25,015 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 13:57:25.015346 duration_in_ms=5.376
2018-09-29 13:57:25,015 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.neigh.default.gc_thresh2] at time 13:57:25.015590
2018-09-29 13:57:25,015 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-09-29 13:57:25,016 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh2' in directory '/root'
2018-09-29 13:57:25,020 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.neigh.default.gc_thresh2 = 8192 is already set
2018-09-29 13:57:25,020 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 13:57:25.020887 duration_in_ms=5.296
2018-09-29 13:57:25,021 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.neigh.default.gc_thresh3] at time 13:57:25.021133
2018-09-29 13:57:25,021 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-09-29 13:57:25,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh3' in directory '/root'
2018-09-29 13:57:25,026 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.neigh.default.gc_thresh3 = 16384 is already set
2018-09-29 13:57:25,026 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 13:57:25.026509 duration_in_ms=5.376
2018-09-29 13:57:25,026 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.tcp_fin_timeout] at time 13:57:25.026756
2018-09-29 13:57:25,026 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-09-29 13:57:25,027 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.tcp_fin_timeout' in directory '/root'
2018-09-29 13:57:25,031 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.tcp_fin_timeout = 30 is already set
2018-09-29 13:57:25,032 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.tcp_fin_timeout] at time 13:57:25.032000 duration_in_ms=5.244
2018-09-29 13:57:25,032 [salt.state       :1770][INFO    ][3918] Running state [net.ipv4.tcp_keepalive_time] at time 13:57:25.032242
2018-09-29 13:57:25,032 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-09-29 13:57:25,033 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.ipv4.tcp_keepalive_time' in directory '/root'
2018-09-29 13:57:25,037 [salt.state       :290 ][INFO    ][3918] Sysctl value net.ipv4.tcp_keepalive_time = 30 is already set
2018-09-29 13:57:25,037 [salt.state       :1941][INFO    ][3918] Completed state [net.ipv4.tcp_keepalive_time] at time 13:57:25.037518 duration_in_ms=5.275
2018-09-29 13:57:25,037 [salt.state       :1770][INFO    ][3918] Running state [net.nf_conntrack_max] at time 13:57:25.037761
2018-09-29 13:57:25,037 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [net.nf_conntrack_max]
2018-09-29 13:57:25,038 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n net.nf_conntrack_max' in directory '/root'
2018-09-29 13:57:25,042 [salt.state       :290 ][INFO    ][3918] Sysctl value net.nf_conntrack_max = 1048576 is already set
2018-09-29 13:57:25,043 [salt.state       :1941][INFO    ][3918] Completed state [net.nf_conntrack_max] at time 13:57:25.043030 duration_in_ms=5.269
2018-09-29 13:57:25,043 [salt.state       :1770][INFO    ][3918] Running state [fs.inotify.max_user_instances] at time 13:57:25.043282
2018-09-29 13:57:25,043 [salt.state       :1803][INFO    ][3918] Executing state sysctl.present for [fs.inotify.max_user_instances]
2018-09-29 13:57:25,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl -n fs.inotify.max_user_instances' in directory '/root'
2018-09-29 13:57:25,048 [salt.state       :290 ][INFO    ][3918] Sysctl value fs.inotify.max_user_instances = 4096 is already set
2018-09-29 13:57:25,048 [salt.state       :1941][INFO    ][3918] Completed state [fs.inotify.max_user_instances] at time 13:57:25.048497 duration_in_ms=5.215
2018-09-29 13:57:25,048 [salt.state       :1770][INFO    ][3918] Running state [/mnt/hugepages_1G] at time 13:57:25.048768
2018-09-29 13:57:25,049 [salt.state       :1803][INFO    ][3918] Executing state mount.mounted for [/mnt/hugepages_1G]
2018-09-29 13:57:25,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'mount -l' in directory '/root'
2018-09-29 13:57:25,055 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'blkid' in directory '/root'
2018-09-29 13:57:25,062 [salt.state       :290 ][INFO    ][3918] Target was already mounted. Entry already exists in the fstab.
2018-09-29 13:57:25,062 [salt.state       :1941][INFO    ][3918] Completed state [/mnt/hugepages_1G] at time 13:57:25.062947 duration_in_ms=14.179
2018-09-29 13:57:25,063 [salt.state       :1770][INFO    ][3918] Running state [sysctl vm.nr_hugepages=16] at time 13:57:25.063175
2018-09-29 13:57:25,063 [salt.state       :1803][INFO    ][3918] Executing state cmd.run for [sysctl vm.nr_hugepages=16]
2018-09-29 13:57:25,063 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'sysctl vm.nr_hugepages | grep -qE '16'' in directory '/root'
2018-09-29 13:57:25,069 [salt.state       :290 ][INFO    ][3918] unless execution succeeded
2018-09-29 13:57:25,069 [salt.state       :1941][INFO    ][3918] Completed state [sysctl vm.nr_hugepages=16] at time 13:57:25.069713 duration_in_ms=6.538
2018-09-29 13:57:25,069 [salt.state       :1770][INFO    ][3918] Running state [systemctl mask dev-hugepages.mount] at time 13:57:25.069938
2018-09-29 13:57:25,070 [salt.state       :1803][INFO    ][3918] Executing state cmd.run for [systemctl mask dev-hugepages.mount]
2018-09-29 13:57:25,070 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'systemctl mask dev-hugepages.mount' in directory '/root'
2018-09-29 13:57:25,118 [salt.state       :290 ][INFO    ][3918] {'pid': 4640, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-09-29 13:57:25,118 [salt.state       :1941][INFO    ][3918] Completed state [systemctl mask dev-hugepages.mount] at time 13:57:25.118777 duration_in_ms=48.839
2018-09-29 13:57:25,119 [salt.state       :1770][INFO    ][3918] Running state [linux_sysfs_package] at time 13:57:25.119027
2018-09-29 13:57:25,119 [salt.state       :1803][INFO    ][3918] Executing state pkg.installed for [linux_sysfs_package]
2018-09-29 13:57:25,126 [salt.state       :290 ][INFO    ][3918] All specified packages are already installed
2018-09-29 13:57:25,126 [salt.state       :1941][INFO    ][3918] Completed state [linux_sysfs_package] at time 13:57:25.126672 duration_in_ms=7.645
2018-09-29 13:57:25,128 [salt.state       :1770][INFO    ][3918] Running state [/etc/sysfs.d] at time 13:57:25.128296
2018-09-29 13:57:25,128 [salt.state       :1803][INFO    ][3918] Executing state file.directory for [/etc/sysfs.d]
2018-09-29 13:57:25,129 [salt.state       :290 ][INFO    ][3918] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-09-29 13:57:25,129 [salt.state       :1941][INFO    ][3918] Completed state [/etc/sysfs.d] at time 13:57:25.129219 duration_in_ms=0.922
2018-09-29 13:57:25,129 [salt.state       :1770][INFO    ][3918] Running state [ondemand] at time 13:57:25.129391
2018-09-29 13:57:25,129 [salt.state       :1803][INFO    ][3918] Executing state service.dead for [ondemand]
2018-09-29 13:57:25,130 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-09-29 13:57:25,137 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-09-29 13:57:25,142 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-09-29 13:57:25,153 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'runlevel' in directory '/root'
2018-09-29 13:57:25,158 [salt.state       :290 ][INFO    ][3918] The service ondemand is already dead
2018-09-29 13:57:25,158 [salt.state       :1941][INFO    ][3918] Completed state [ondemand] at time 13:57:25.158703 duration_in_ms=29.312
2018-09-29 13:57:25,160 [salt.state       :1770][INFO    ][3918] Running state [/etc/sysfs.d/governor.conf] at time 13:57:25.160193
2018-09-29 13:57:25,160 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/sysfs.d/governor.conf]
2018-09-29 13:57:25,187 [salt.state       :290 ][INFO    ][3918] File /etc/sysfs.d/governor.conf is in the correct state
2018-09-29 13:57:25,187 [salt.state       :1941][INFO    ][3918] Completed state [/etc/sysfs.d/governor.conf] at time 13:57:25.187489 duration_in_ms=27.296
2018-09-29 13:57:25,187 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.187689
2018-09-29 13:57:25,187 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,188 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,188 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,188 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.188728 duration_in_ms=1.038
2018-09-29 13:57:25,188 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.188917
2018-09-29 13:57:25,189 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,189 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,189 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,189 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.189840 duration_in_ms=0.923
2018-09-29 13:57:25,190 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.190021
2018-09-29 13:57:25,190 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,190 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,190 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,190 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.190903 duration_in_ms=0.882
2018-09-29 13:57:25,191 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.191085
2018-09-29 13:57:25,191 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,191 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,191 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,192 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.191960 duration_in_ms=0.875
2018-09-29 13:57:25,192 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.192139
2018-09-29 13:57:25,192 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,192 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,192 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,193 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.193086 duration_in_ms=0.946
2018-09-29 13:57:25,193 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.193272
2018-09-29 13:57:25,193 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,193 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,194 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,194 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.194144 duration_in_ms=0.872
2018-09-29 13:57:25,194 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.194325
2018-09-29 13:57:25,194 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,194 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,195 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,195 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.195196 duration_in_ms=0.871
2018-09-29 13:57:25,195 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.195365
2018-09-29 13:57:25,195 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,195 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,196 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,196 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.196241 duration_in_ms=0.876
2018-09-29 13:57:25,196 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.196408
2018-09-29 13:57:25,196 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,196 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,197 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,197 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.197330 duration_in_ms=0.923
2018-09-29 13:57:25,197 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.197509
2018-09-29 13:57:25,197 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,197 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,198 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,198 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.198387 duration_in_ms=0.879
2018-09-29 13:57:25,198 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.198566
2018-09-29 13:57:25,198 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,198 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,199 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,199 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.199437 duration_in_ms=0.871
2018-09-29 13:57:25,199 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.199624
2018-09-29 13:57:25,199 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,200 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,200 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,200 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.200506 duration_in_ms=0.882
2018-09-29 13:57:25,200 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.200728
2018-09-29 13:57:25,200 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,201 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,201 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,201 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.201653 duration_in_ms=0.925
2018-09-29 13:57:25,201 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.201831
2018-09-29 13:57:25,202 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,202 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,202 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,202 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.202699 duration_in_ms=0.868
2018-09-29 13:57:25,202 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.202877
2018-09-29 13:57:25,203 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,203 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,203 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,203 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.203748 duration_in_ms=0.871
2018-09-29 13:57:25,203 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.203927
2018-09-29 13:57:25,204 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,204 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,204 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,204 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.204821 duration_in_ms=0.894
2018-09-29 13:57:25,205 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.205016
2018-09-29 13:57:25,205 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,205 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,205 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,205 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.205887 duration_in_ms=0.871
2018-09-29 13:57:25,206 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.206053
2018-09-29 13:57:25,206 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,206 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,206 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,206 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.206927 duration_in_ms=0.874
2018-09-29 13:57:25,207 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.207096
2018-09-29 13:57:25,207 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,207 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,207 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,207 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.207965 duration_in_ms=0.87
2018-09-29 13:57:25,208 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.208129
2018-09-29 13:57:25,208 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,208 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,208 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,209 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.209029 duration_in_ms=0.9
2018-09-29 13:57:25,209 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.209217
2018-09-29 13:57:25,209 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,209 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,209 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,210 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.210084 duration_in_ms=0.867
2018-09-29 13:57:25,210 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.210262
2018-09-29 13:57:25,210 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,210 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,210 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,211 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.211142 duration_in_ms=0.881
2018-09-29 13:57:25,211 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.211320
2018-09-29 13:57:25,211 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,211 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,212 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,212 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.212187 duration_in_ms=0.867
2018-09-29 13:57:25,212 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.212366
2018-09-29 13:57:25,212 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,212 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,213 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,213 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.213290 duration_in_ms=0.924
2018-09-29 13:57:25,213 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.213468
2018-09-29 13:57:25,213 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,213 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,214 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,214 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.214340 duration_in_ms=0.872
2018-09-29 13:57:25,214 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.214520
2018-09-29 13:57:25,214 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,214 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,215 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,215 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.215409 duration_in_ms=0.889
2018-09-29 13:57:25,215 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.215588
2018-09-29 13:57:25,215 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,215 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,216 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,216 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.216457 duration_in_ms=0.869
2018-09-29 13:57:25,216 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.216659
2018-09-29 13:57:25,216 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,217 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,217 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,217 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.217603 duration_in_ms=0.943
2018-09-29 13:57:25,217 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.217781
2018-09-29 13:57:25,217 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,218 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,218 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,218 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.218647 duration_in_ms=0.866
2018-09-29 13:57:25,218 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.218824
2018-09-29 13:57:25,219 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,219 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,219 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,219 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.219707 duration_in_ms=0.882
2018-09-29 13:57:25,219 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.219885
2018-09-29 13:57:25,220 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,220 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,220 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,220 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.220764 duration_in_ms=0.879
2018-09-29 13:57:25,220 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.220944
2018-09-29 13:57:25,221 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,221 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,221 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,221 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.221831 duration_in_ms=0.887
2018-09-29 13:57:25,222 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.222009
2018-09-29 13:57:25,222 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,222 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,222 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,222 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.222880 duration_in_ms=0.87
2018-09-29 13:57:25,223 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.223045
2018-09-29 13:57:25,223 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,223 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,223 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,223 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.223907 duration_in_ms=0.863
2018-09-29 13:57:25,224 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.224084
2018-09-29 13:57:25,224 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,224 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,224 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,225 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.224994 duration_in_ms=0.91
2018-09-29 13:57:25,225 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.225155
2018-09-29 13:57:25,225 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,225 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,225 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,226 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.226018 duration_in_ms=0.863
2018-09-29 13:57:25,226 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.226197
2018-09-29 13:57:25,226 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,226 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,226 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,227 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.227072 duration_in_ms=0.875
2018-09-29 13:57:25,227 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.227237
2018-09-29 13:57:25,227 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,227 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,228 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,228 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.228148 duration_in_ms=0.911
2018-09-29 13:57:25,228 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.228341
2018-09-29 13:57:25,228 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,228 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,229 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,229 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.229267 duration_in_ms=0.926
2018-09-29 13:57:25,229 [salt.state       :1770][INFO    ][3918] Running state [sysfs.write] at time 13:57:25.229454
2018-09-29 13:57:25,229 [salt.state       :1803][INFO    ][3918] Executing state module.run for [sysfs.write]
2018-09-29 13:57:25,229 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,230 [salt.state       :290 ][INFO    ][3918] {'ret': True}
2018-09-29 13:57:25,230 [salt.state       :1941][INFO    ][3918] Completed state [sysfs.write] at time 13:57:25.230317 duration_in_ms=0.864
2018-09-29 13:57:25,230 [salt.state       :1770][INFO    ][3918] Running state [cs_CZ.UTF-8] at time 13:57:25.230497
2018-09-29 13:57:25,230 [salt.state       :1803][INFO    ][3918] Executing state locale.present for [cs_CZ.UTF-8]
2018-09-29 13:57:25,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'locale -a' in directory '/root'
2018-09-29 13:57:25,235 [salt.state       :290 ][INFO    ][3918] Locale cs_CZ.UTF-8 is already present
2018-09-29 13:57:25,236 [salt.state       :1941][INFO    ][3918] Completed state [cs_CZ.UTF-8] at time 13:57:25.236121 duration_in_ms=5.61
2018-09-29 13:57:25,236 [salt.state       :1770][INFO    ][3918] Running state [en_US.UTF-8] at time 13:57:25.236348
2018-09-29 13:57:25,236 [salt.state       :1803][INFO    ][3918] Executing state locale.present for [en_US.UTF-8]
2018-09-29 13:57:25,237 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'locale -a' in directory '/root'
2018-09-29 13:57:25,241 [salt.state       :290 ][INFO    ][3918] Locale en_US.UTF-8 is already present
2018-09-29 13:57:25,241 [salt.state       :1941][INFO    ][3918] Completed state [en_US.UTF-8] at time 13:57:25.241563 duration_in_ms=5.215
2018-09-29 13:57:25,243 [salt.state       :1770][INFO    ][3918] Running state [en_US.UTF-8] at time 13:57:25.243246
2018-09-29 13:57:25,243 [salt.state       :1803][INFO    ][3918] Executing state locale.system for [en_US.UTF-8]
2018-09-29 13:57:25,243 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'localectl' in directory '/root'
2018-09-29 13:57:25,272 [salt.state       :290 ][INFO    ][3918] System locale en_US.UTF-8 already set
2018-09-29 13:57:25,273 [salt.state       :1941][INFO    ][3918] Completed state [en_US.UTF-8] at time 13:57:25.273125 duration_in_ms=29.878
2018-09-29 13:57:25,273 [salt.state       :1770][INFO    ][3918] Running state [root] at time 13:57:25.273369
2018-09-29 13:57:25,273 [salt.state       :1803][INFO    ][3918] Executing state group.present for [root]
2018-09-29 13:57:25,273 [salt.state       :290 ][INFO    ][3918] Group root is present and up to date
2018-09-29 13:57:25,274 [salt.state       :1941][INFO    ][3918] Completed state [root] at time 13:57:25.274114 duration_in_ms=0.745
2018-09-29 13:57:25,275 [salt.state       :1770][INFO    ][3918] Running state [root] at time 13:57:25.275476
2018-09-29 13:57:25,275 [salt.state       :1803][INFO    ][3918] Executing state user.present for [root]
2018-09-29 13:57:25,276 [salt.state       :290 ][INFO    ][3918] User root is present and up to date
2018-09-29 13:57:25,276 [salt.state       :1941][INFO    ][3918] Completed state [root] at time 13:57:25.276799 duration_in_ms=1.324
2018-09-29 13:57:25,278 [salt.state       :1770][INFO    ][3918] Running state [/root] at time 13:57:25.278332
2018-09-29 13:57:25,278 [salt.state       :1803][INFO    ][3918] Executing state file.directory for [/root]
2018-09-29 13:57:25,279 [salt.state       :290 ][INFO    ][3918] Directory /root is in the correct state
Directory /root updated
2018-09-29 13:57:25,279 [salt.state       :1941][INFO    ][3918] Completed state [/root] at time 13:57:25.279336 duration_in_ms=1.005
2018-09-29 13:57:25,279 [salt.state       :1770][INFO    ][3918] Running state [/etc/sudoers.d/90-salt-user-root] at time 13:57:25.279533
2018-09-29 13:57:25,279 [salt.state       :1803][INFO    ][3918] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-09-29 13:57:25,280 [salt.state       :290 ][INFO    ][3918] File /etc/sudoers.d/90-salt-user-root is not present
2018-09-29 13:57:25,280 [salt.state       :1941][INFO    ][3918] Completed state [/etc/sudoers.d/90-salt-user-root] at time 13:57:25.280407 duration_in_ms=0.873
2018-09-29 13:57:25,280 [salt.state       :1770][INFO    ][3918] Running state [ubuntu] at time 13:57:25.280628
2018-09-29 13:57:25,280 [salt.state       :1803][INFO    ][3918] Executing state group.present for [ubuntu]
2018-09-29 13:57:25,281 [salt.state       :290 ][INFO    ][3918] Group ubuntu is present and up to date
2018-09-29 13:57:25,281 [salt.state       :1941][INFO    ][3918] Completed state [ubuntu] at time 13:57:25.281299 duration_in_ms=0.659
2018-09-29 13:57:25,282 [salt.state       :1770][INFO    ][3918] Running state [ubuntu] at time 13:57:25.282446
2018-09-29 13:57:25,282 [salt.state       :1803][INFO    ][3918] Executing state user.present for [ubuntu]
2018-09-29 13:57:25,283 [salt.state       :290 ][INFO    ][3918] User ubuntu is present and up to date
2018-09-29 13:57:25,283 [salt.state       :1941][INFO    ][3918] Completed state [ubuntu] at time 13:57:25.283851 duration_in_ms=1.405
2018-09-29 13:57:25,285 [salt.state       :1770][INFO    ][3918] Running state [/home/ubuntu] at time 13:57:25.285405
2018-09-29 13:57:25,285 [salt.state       :1803][INFO    ][3918] Executing state file.directory for [/home/ubuntu]
2018-09-29 13:57:25,286 [salt.state       :290 ][INFO    ][3918] Directory /home/ubuntu is in the correct state
Directory /home/ubuntu updated
2018-09-29 13:57:25,286 [salt.state       :1941][INFO    ][3918] Completed state [/home/ubuntu] at time 13:57:25.286350 duration_in_ms=0.945
2018-09-29 13:57:25,287 [salt.state       :1770][INFO    ][3918] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 13:57:25.287653
2018-09-29 13:57:25,287 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-09-29 13:57:25,313 [salt.state       :290 ][INFO    ][3918] File /etc/sudoers.d/90-salt-user-ubuntu is in the correct state
2018-09-29 13:57:25,313 [salt.state       :1941][INFO    ][3918] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 13:57:25.313236 duration_in_ms=25.583
2018-09-29 13:57:25,313 [salt.state       :1770][INFO    ][3918] Running state [/etc/security/limits.d/90-salt-default.conf] at time 13:57:25.313442
2018-09-29 13:57:25,313 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-09-29 13:57:25,425 [salt.state       :290 ][INFO    ][3918] File /etc/security/limits.d/90-salt-default.conf is in the correct state
2018-09-29 13:57:25,425 [salt.state       :1941][INFO    ][3918] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 13:57:25.425767 duration_in_ms=112.312
2018-09-29 13:57:25,426 [salt.state       :1770][INFO    ][3918] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 13:57:25.426012
2018-09-29 13:57:25,426 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-09-29 13:57:25,529 [salt.state       :290 ][INFO    ][3918] File /etc/systemd/system.conf.d/90-salt.conf is in the correct state
2018-09-29 13:57:25,530 [salt.state       :1941][INFO    ][3918] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 13:57:25.529988 duration_in_ms=103.976
2018-09-29 13:57:25,531 [salt.state       :1770][INFO    ][3918] Running state [service.systemctl_reload] at time 13:57:25.531394
2018-09-29 13:57:25,531 [salt.state       :1803][INFO    ][3918] Executing state module.wait for [service.systemctl_reload]
2018-09-29 13:57:25,531 [salt.state       :290 ][INFO    ][3918] No changes made for service.systemctl_reload
2018-09-29 13:57:25,532 [salt.state       :1941][INFO    ][3918] Completed state [service.systemctl_reload] at time 13:57:25.531970 duration_in_ms=0.577
2018-09-29 13:57:25,532 [salt.state       :1770][INFO    ][3918] Running state [/etc/issue] at time 13:57:25.532150
2018-09-29 13:57:25,532 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/issue]
2018-09-29 13:57:25,533 [salt.state       :290 ][INFO    ][3918] File /etc/issue is in the correct state
2018-09-29 13:57:25,533 [salt.state       :1941][INFO    ][3918] Completed state [/etc/issue] at time 13:57:25.533480 duration_in_ms=1.33
2018-09-29 13:57:25,533 [salt.state       :1770][INFO    ][3918] Running state [/etc/hostname] at time 13:57:25.533670
2018-09-29 13:57:25,533 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/hostname]
2018-09-29 13:57:25,550 [salt.state       :290 ][INFO    ][3918] File /etc/hostname is in the correct state
2018-09-29 13:57:25,551 [salt.state       :1941][INFO    ][3918] Completed state [/etc/hostname] at time 13:57:25.551139 duration_in_ms=17.469
2018-09-29 13:57:25,552 [salt.state       :1770][INFO    ][3918] Running state [hostname cmp002] at time 13:57:25.552328
2018-09-29 13:57:25,552 [salt.state       :1803][INFO    ][3918] Executing state cmd.run for [hostname cmp002]
2018-09-29 13:57:25,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'test "$(hostname)" = "cmp002"' in directory '/root'
2018-09-29 13:57:25,558 [salt.state       :290 ][INFO    ][3918] unless execution succeeded
2018-09-29 13:57:25,558 [salt.state       :1941][INFO    ][3918] Completed state [hostname cmp002] at time 13:57:25.558500 duration_in_ms=6.172
2018-09-29 13:57:25,558 [salt.state       :1770][INFO    ][3918] Running state [mdb02] at time 13:57:25.558891
2018-09-29 13:57:25,559 [salt.state       :1803][INFO    ][3918] Executing state host.present for [mdb02]
2018-09-29 13:57:25,559 [salt.state       :290 ][INFO    ][3918] Host mdb02 (192.168.10.33) already present
2018-09-29 13:57:25,559 [salt.state       :1941][INFO    ][3918] Completed state [mdb02] at time 13:57:25.559889 duration_in_ms=0.999
2018-09-29 13:57:25,560 [salt.state       :1770][INFO    ][3918] Running state [mdb02.mcp-pike-odl-ha.local] at time 13:57:25.560192
2018-09-29 13:57:25,560 [salt.state       :1803][INFO    ][3918] Executing state host.present for [mdb02.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,560 [salt.state       :290 ][INFO    ][3918] Host mdb02.mcp-pike-odl-ha.local (192.168.10.33) already present
2018-09-29 13:57:25,561 [salt.state       :1941][INFO    ][3918] Completed state [mdb02.mcp-pike-odl-ha.local] at time 13:57:25.561030 duration_in_ms=0.837
2018-09-29 13:57:25,561 [salt.state       :1770][INFO    ][3918] Running state [mdb03] at time 13:57:25.561346
2018-09-29 13:57:25,561 [salt.state       :1803][INFO    ][3918] Executing state host.present for [mdb03]
2018-09-29 13:57:25,562 [salt.state       :290 ][INFO    ][3918] Host mdb03 (192.168.10.34) already present
2018-09-29 13:57:25,562 [salt.state       :1941][INFO    ][3918] Completed state [mdb03] at time 13:57:25.562145 duration_in_ms=0.799
2018-09-29 13:57:25,562 [salt.state       :1770][INFO    ][3918] Running state [mdb03.mcp-pike-odl-ha.local] at time 13:57:25.562445
2018-09-29 13:57:25,562 [salt.state       :1803][INFO    ][3918] Executing state host.present for [mdb03.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,563 [salt.state       :290 ][INFO    ][3918] Host mdb03.mcp-pike-odl-ha.local (192.168.10.34) already present
2018-09-29 13:57:25,563 [salt.state       :1941][INFO    ][3918] Completed state [mdb03.mcp-pike-odl-ha.local] at time 13:57:25.563239 duration_in_ms=0.794
2018-09-29 13:57:25,563 [salt.state       :1770][INFO    ][3918] Running state [mdb01] at time 13:57:25.563541
2018-09-29 13:57:25,563 [salt.state       :1803][INFO    ][3918] Executing state host.present for [mdb01]
2018-09-29 13:57:25,564 [salt.state       :290 ][INFO    ][3918] Host mdb01 (192.168.10.32) already present
2018-09-29 13:57:25,564 [salt.state       :1941][INFO    ][3918] Completed state [mdb01] at time 13:57:25.564338 duration_in_ms=0.798
2018-09-29 13:57:25,564 [salt.state       :1770][INFO    ][3918] Running state [mdb01.mcp-pike-odl-ha.local] at time 13:57:25.564659
2018-09-29 13:57:25,564 [salt.state       :1803][INFO    ][3918] Executing state host.present for [mdb01.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,565 [salt.state       :290 ][INFO    ][3918] Host mdb01.mcp-pike-odl-ha.local (192.168.10.32) already present
2018-09-29 13:57:25,565 [salt.state       :1941][INFO    ][3918] Completed state [mdb01.mcp-pike-odl-ha.local] at time 13:57:25.565486 duration_in_ms=0.828
2018-09-29 13:57:25,565 [salt.state       :1770][INFO    ][3918] Running state [mdb] at time 13:57:25.565786
2018-09-29 13:57:25,566 [salt.state       :1803][INFO    ][3918] Executing state host.present for [mdb]
2018-09-29 13:57:25,566 [salt.state       :290 ][INFO    ][3918] Host mdb (192.168.10.31) already present
2018-09-29 13:57:25,566 [salt.state       :1941][INFO    ][3918] Completed state [mdb] at time 13:57:25.566579 duration_in_ms=0.793
2018-09-29 13:57:25,566 [salt.state       :1770][INFO    ][3918] Running state [mdb.mcp-pike-odl-ha.local] at time 13:57:25.566875
2018-09-29 13:57:25,567 [salt.state       :1803][INFO    ][3918] Executing state host.present for [mdb.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,567 [salt.state       :290 ][INFO    ][3918] Host mdb.mcp-pike-odl-ha.local (192.168.10.31) already present
2018-09-29 13:57:25,567 [salt.state       :1941][INFO    ][3918] Completed state [mdb.mcp-pike-odl-ha.local] at time 13:57:25.567653 duration_in_ms=0.777
2018-09-29 13:57:25,567 [salt.state       :1770][INFO    ][3918] Running state [cfg01] at time 13:57:25.567946
2018-09-29 13:57:25,568 [salt.state       :1803][INFO    ][3918] Executing state host.present for [cfg01]
2018-09-29 13:57:25,568 [salt.state       :290 ][INFO    ][3918] Host cfg01 (192.168.10.11) already present
2018-09-29 13:57:25,568 [salt.state       :1941][INFO    ][3918] Completed state [cfg01] at time 13:57:25.568750 duration_in_ms=0.804
2018-09-29 13:57:25,569 [salt.state       :1770][INFO    ][3918] Running state [cfg01.mcp-pike-odl-ha.local] at time 13:57:25.569062
2018-09-29 13:57:25,569 [salt.state       :1803][INFO    ][3918] Executing state host.present for [cfg01.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,570 [salt.state       :290 ][INFO    ][3918] Host cfg01.mcp-pike-odl-ha.local (192.168.10.11) already present
2018-09-29 13:57:25,570 [salt.state       :1941][INFO    ][3918] Completed state [cfg01.mcp-pike-odl-ha.local] at time 13:57:25.570793 duration_in_ms=1.731
2018-09-29 13:57:25,571 [salt.state       :1770][INFO    ][3918] Running state [prx01] at time 13:57:25.571196
2018-09-29 13:57:25,571 [salt.state       :1803][INFO    ][3918] Executing state host.present for [prx01]
2018-09-29 13:57:25,571 [salt.state       :290 ][INFO    ][3918] Host prx01 (192.168.10.14) already present
2018-09-29 13:57:25,572 [salt.state       :1941][INFO    ][3918] Completed state [prx01] at time 13:57:25.572017 duration_in_ms=0.821
2018-09-29 13:57:25,572 [salt.state       :1770][INFO    ][3918] Running state [prx01.mcp-pike-odl-ha.local] at time 13:57:25.572325
2018-09-29 13:57:25,572 [salt.state       :1803][INFO    ][3918] Executing state host.present for [prx01.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,572 [salt.state       :290 ][INFO    ][3918] Host prx01.mcp-pike-odl-ha.local (192.168.10.14) already present
2018-09-29 13:57:25,573 [salt.state       :1941][INFO    ][3918] Completed state [prx01.mcp-pike-odl-ha.local] at time 13:57:25.573086 duration_in_ms=0.761
2018-09-29 13:57:25,573 [salt.state       :1770][INFO    ][3918] Running state [kvm01] at time 13:57:25.573389
2018-09-29 13:57:25,573 [salt.state       :1803][INFO    ][3918] Executing state host.present for [kvm01]
2018-09-29 13:57:25,574 [salt.state       :290 ][INFO    ][3918] Host kvm01 (192.168.10.20) already present
2018-09-29 13:57:25,574 [salt.state       :1941][INFO    ][3918] Completed state [kvm01] at time 13:57:25.574141 duration_in_ms=0.751
2018-09-29 13:57:25,574 [salt.state       :1770][INFO    ][3918] Running state [kvm01.mcp-pike-odl-ha.local] at time 13:57:25.574443
2018-09-29 13:57:25,574 [salt.state       :1803][INFO    ][3918] Executing state host.present for [kvm01.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,575 [salt.state       :290 ][INFO    ][3918] Host kvm01.mcp-pike-odl-ha.local (192.168.10.20) already present
2018-09-29 13:57:25,575 [salt.state       :1941][INFO    ][3918] Completed state [kvm01.mcp-pike-odl-ha.local] at time 13:57:25.575181 duration_in_ms=0.738
2018-09-29 13:57:25,575 [salt.state       :1770][INFO    ][3918] Running state [kvm03] at time 13:57:25.575481
2018-09-29 13:57:25,575 [salt.state       :1803][INFO    ][3918] Executing state host.present for [kvm03]
2018-09-29 13:57:25,576 [salt.state       :290 ][INFO    ][3918] Host kvm03 (192.168.10.22) already present
2018-09-29 13:57:25,576 [salt.state       :1941][INFO    ][3918] Completed state [kvm03] at time 13:57:25.576217 duration_in_ms=0.735
2018-09-29 13:57:25,576 [salt.state       :1770][INFO    ][3918] Running state [kvm03.mcp-pike-odl-ha.local] at time 13:57:25.576517
2018-09-29 13:57:25,576 [salt.state       :1803][INFO    ][3918] Executing state host.present for [kvm03.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,577 [salt.state       :290 ][INFO    ][3918] Host kvm03.mcp-pike-odl-ha.local (192.168.10.22) already present
2018-09-29 13:57:25,577 [salt.state       :1941][INFO    ][3918] Completed state [kvm03.mcp-pike-odl-ha.local] at time 13:57:25.577258 duration_in_ms=0.742
2018-09-29 13:57:25,577 [salt.state       :1770][INFO    ][3918] Running state [kvm02] at time 13:57:25.577567
2018-09-29 13:57:25,577 [salt.state       :1803][INFO    ][3918] Executing state host.present for [kvm02]
2018-09-29 13:57:25,578 [salt.state       :290 ][INFO    ][3918] Host kvm02 (192.168.10.21) already present
2018-09-29 13:57:25,578 [salt.state       :1941][INFO    ][3918] Completed state [kvm02] at time 13:57:25.578298 duration_in_ms=0.731
2018-09-29 13:57:25,578 [salt.state       :1770][INFO    ][3918] Running state [kvm02.mcp-pike-odl-ha.local] at time 13:57:25.578601
2018-09-29 13:57:25,578 [salt.state       :1803][INFO    ][3918] Executing state host.present for [kvm02.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,579 [salt.state       :290 ][INFO    ][3918] Host kvm02.mcp-pike-odl-ha.local (192.168.10.21) already present
2018-09-29 13:57:25,579 [salt.state       :1941][INFO    ][3918] Completed state [kvm02.mcp-pike-odl-ha.local] at time 13:57:25.579332 duration_in_ms=0.73
2018-09-29 13:57:25,579 [salt.state       :1770][INFO    ][3918] Running state [dbs] at time 13:57:25.579642
2018-09-29 13:57:25,579 [salt.state       :1803][INFO    ][3918] Executing state host.present for [dbs]
2018-09-29 13:57:25,580 [salt.state       :290 ][INFO    ][3918] Host dbs (192.168.10.23) already present
2018-09-29 13:57:25,580 [salt.state       :1941][INFO    ][3918] Completed state [dbs] at time 13:57:25.580372 duration_in_ms=0.73
2018-09-29 13:57:25,580 [salt.state       :1770][INFO    ][3918] Running state [dbs.mcp-pike-odl-ha.local] at time 13:57:25.580685
2018-09-29 13:57:25,580 [salt.state       :1803][INFO    ][3918] Executing state host.present for [dbs.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,581 [salt.state       :290 ][INFO    ][3918] Host dbs.mcp-pike-odl-ha.local (192.168.10.23) already present
2018-09-29 13:57:25,581 [salt.state       :1941][INFO    ][3918] Completed state [dbs.mcp-pike-odl-ha.local] at time 13:57:25.581432 duration_in_ms=0.746
2018-09-29 13:57:25,581 [salt.state       :1770][INFO    ][3918] Running state [prx] at time 13:57:25.581738
2018-09-29 13:57:25,581 [salt.state       :1803][INFO    ][3918] Executing state host.present for [prx]
2018-09-29 13:57:25,582 [salt.state       :290 ][INFO    ][3918] Host prx (192.168.10.13) already present
2018-09-29 13:57:25,582 [salt.state       :1941][INFO    ][3918] Completed state [prx] at time 13:57:25.582473 duration_in_ms=0.735
2018-09-29 13:57:25,582 [salt.state       :1770][INFO    ][3918] Running state [prx.mcp-pike-odl-ha.local] at time 13:57:25.582781
2018-09-29 13:57:25,582 [salt.state       :1803][INFO    ][3918] Executing state host.present for [prx.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,583 [salt.state       :290 ][INFO    ][3918] Host prx.mcp-pike-odl-ha.local (192.168.10.13) already present
2018-09-29 13:57:25,583 [salt.state       :1941][INFO    ][3918] Completed state [prx.mcp-pike-odl-ha.local] at time 13:57:25.583506 duration_in_ms=0.726
2018-09-29 13:57:25,583 [salt.state       :1770][INFO    ][3918] Running state [prx02] at time 13:57:25.583813
2018-09-29 13:57:25,584 [salt.state       :1803][INFO    ][3918] Executing state host.present for [prx02]
2018-09-29 13:57:25,584 [salt.state       :290 ][INFO    ][3918] Host prx02 (192.168.10.15) already present
2018-09-29 13:57:25,584 [salt.state       :1941][INFO    ][3918] Completed state [prx02] at time 13:57:25.584536 duration_in_ms=0.723
2018-09-29 13:57:25,584 [salt.state       :1770][INFO    ][3918] Running state [prx02.mcp-pike-odl-ha.local] at time 13:57:25.584858
2018-09-29 13:57:25,585 [salt.state       :1803][INFO    ][3918] Executing state host.present for [prx02.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,585 [salt.state       :290 ][INFO    ][3918] Host prx02.mcp-pike-odl-ha.local (192.168.10.15) already present
2018-09-29 13:57:25,585 [salt.state       :1941][INFO    ][3918] Completed state [prx02.mcp-pike-odl-ha.local] at time 13:57:25.585589 duration_in_ms=0.731
2018-09-29 13:57:25,585 [salt.state       :1770][INFO    ][3918] Running state [msg02] at time 13:57:25.585896
2018-09-29 13:57:25,586 [salt.state       :1803][INFO    ][3918] Executing state host.present for [msg02]
2018-09-29 13:57:25,586 [salt.state       :290 ][INFO    ][3918] Host msg02 (192.168.10.29) already present
2018-09-29 13:57:25,586 [salt.state       :1941][INFO    ][3918] Completed state [msg02] at time 13:57:25.586621 duration_in_ms=0.725
2018-09-29 13:57:25,586 [salt.state       :1770][INFO    ][3918] Running state [msg02.mcp-pike-odl-ha.local] at time 13:57:25.586928
2018-09-29 13:57:25,587 [salt.state       :1803][INFO    ][3918] Executing state host.present for [msg02.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,587 [salt.state       :290 ][INFO    ][3918] Host msg02.mcp-pike-odl-ha.local (192.168.10.29) already present
2018-09-29 13:57:25,587 [salt.state       :1941][INFO    ][3918] Completed state [msg02.mcp-pike-odl-ha.local] at time 13:57:25.587656 duration_in_ms=0.727
2018-09-29 13:57:25,587 [salt.state       :1770][INFO    ][3918] Running state [msg03] at time 13:57:25.587965
2018-09-29 13:57:25,588 [salt.state       :1803][INFO    ][3918] Executing state host.present for [msg03]
2018-09-29 13:57:25,588 [salt.state       :290 ][INFO    ][3918] Host msg03 (192.168.10.30) already present
2018-09-29 13:57:25,588 [salt.state       :1941][INFO    ][3918] Completed state [msg03] at time 13:57:25.588708 duration_in_ms=0.743
2018-09-29 13:57:25,589 [salt.state       :1770][INFO    ][3918] Running state [msg03.mcp-pike-odl-ha.local] at time 13:57:25.589019
2018-09-29 13:57:25,589 [salt.state       :1803][INFO    ][3918] Executing state host.present for [msg03.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,589 [salt.state       :290 ][INFO    ][3918] Host msg03.mcp-pike-odl-ha.local (192.168.10.30) already present
2018-09-29 13:57:25,589 [salt.state       :1941][INFO    ][3918] Completed state [msg03.mcp-pike-odl-ha.local] at time 13:57:25.589747 duration_in_ms=0.728
2018-09-29 13:57:25,590 [salt.state       :1770][INFO    ][3918] Running state [msg01] at time 13:57:25.590057
2018-09-29 13:57:25,590 [salt.state       :1803][INFO    ][3918] Executing state host.present for [msg01]
2018-09-29 13:57:25,590 [salt.state       :290 ][INFO    ][3918] Host msg01 (192.168.10.28) already present
2018-09-29 13:57:25,590 [salt.state       :1941][INFO    ][3918] Completed state [msg01] at time 13:57:25.590789 duration_in_ms=0.732
2018-09-29 13:57:25,591 [salt.state       :1770][INFO    ][3918] Running state [msg01.mcp-pike-odl-ha.local] at time 13:57:25.591101
2018-09-29 13:57:25,591 [salt.state       :1803][INFO    ][3918] Executing state host.present for [msg01.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,591 [salt.state       :290 ][INFO    ][3918] Host msg01.mcp-pike-odl-ha.local (192.168.10.28) already present
2018-09-29 13:57:25,591 [salt.state       :1941][INFO    ][3918] Completed state [msg01.mcp-pike-odl-ha.local] at time 13:57:25.591827 duration_in_ms=0.727
2018-09-29 13:57:25,592 [salt.state       :1770][INFO    ][3918] Running state [msg] at time 13:57:25.592142
2018-09-29 13:57:25,592 [salt.state       :1803][INFO    ][3918] Executing state host.present for [msg]
2018-09-29 13:57:25,592 [salt.state       :290 ][INFO    ][3918] Host msg (192.168.10.27) already present
2018-09-29 13:57:25,593 [salt.state       :1941][INFO    ][3918] Completed state [msg] at time 13:57:25.592991 duration_in_ms=0.849
2018-09-29 13:57:25,593 [salt.state       :1770][INFO    ][3918] Running state [msg.mcp-pike-odl-ha.local] at time 13:57:25.593302
2018-09-29 13:57:25,593 [salt.state       :1803][INFO    ][3918] Executing state host.present for [msg.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,593 [salt.state       :290 ][INFO    ][3918] Host msg.mcp-pike-odl-ha.local (192.168.10.27) already present
2018-09-29 13:57:25,594 [salt.state       :1941][INFO    ][3918] Completed state [msg.mcp-pike-odl-ha.local] at time 13:57:25.594031 duration_in_ms=0.729
2018-09-29 13:57:25,594 [salt.state       :1770][INFO    ][3918] Running state [cfg01] at time 13:57:25.594347
2018-09-29 13:57:25,594 [salt.state       :1803][INFO    ][3918] Executing state host.present for [cfg01]
2018-09-29 13:57:25,594 [salt.state       :290 ][INFO    ][3918] Host cfg01 (192.168.10.11) already present
2018-09-29 13:57:25,595 [salt.state       :1941][INFO    ][3918] Completed state [cfg01] at time 13:57:25.595077 duration_in_ms=0.729
2018-09-29 13:57:25,595 [salt.state       :1770][INFO    ][3918] Running state [cfg01.mcp-pike-odl-ha.local] at time 13:57:25.595394
2018-09-29 13:57:25,595 [salt.state       :1803][INFO    ][3918] Executing state host.present for [cfg01.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,595 [salt.state       :290 ][INFO    ][3918] Host cfg01.mcp-pike-odl-ha.local (192.168.10.11) already present
2018-09-29 13:57:25,596 [salt.state       :1941][INFO    ][3918] Completed state [cfg01.mcp-pike-odl-ha.local] at time 13:57:25.596118 duration_in_ms=0.724
2018-09-29 13:57:25,596 [salt.state       :1770][INFO    ][3918] Running state [cmp002] at time 13:57:25.596429
2018-09-29 13:57:25,596 [salt.state       :1803][INFO    ][3918] Executing state host.present for [cmp002]
2018-09-29 13:57:25,597 [salt.state       :290 ][INFO    ][3918] Host cmp002 (192.168.10.53) already present
2018-09-29 13:57:25,597 [salt.state       :1941][INFO    ][3918] Completed state [cmp002] at time 13:57:25.597174 duration_in_ms=0.744
2018-09-29 13:57:25,597 [salt.state       :1770][INFO    ][3918] Running state [cmp002.mcp-pike-odl-ha.local] at time 13:57:25.597493
2018-09-29 13:57:25,597 [salt.state       :1803][INFO    ][3918] Executing state host.present for [cmp002.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,598 [salt.state       :290 ][INFO    ][3918] Host cmp002.mcp-pike-odl-ha.local (192.168.10.53) already present
2018-09-29 13:57:25,598 [salt.state       :1941][INFO    ][3918] Completed state [cmp002.mcp-pike-odl-ha.local] at time 13:57:25.598217 duration_in_ms=0.724
2018-09-29 13:57:25,600 [salt.state       :1770][INFO    ][3918] Running state [file.replace] at time 13:57:25.600050
2018-09-29 13:57:25,600 [salt.state       :1803][INFO    ][3918] Executing state module.run for [file.replace]
2018-09-29 13:57:25,605 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'grep -q "cmp002 cmp002.mcp-pike-odl-ha.local" /etc/hosts' in directory '/root'
2018-09-29 13:57:25,611 [salt.utils.decorators:613 ][WARNING ][3918] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:57:25,614 [salt.state       :290 ][INFO    ][3918] {'ret': '--- \n+++ \n@@ -22,7 +22,7 @@\n 192.168.10.30\t\tmsg03 msg03.mcp-pike-odl-ha.local\n 192.168.10.28\t\tmsg01 msg01.mcp-pike-odl-ha.local\n 192.168.10.27\t\tmsg msg.mcp-pike-odl-ha.local\n-192.168.10.53\t\tcmp002 cmp002.mcp-pike-odl-ha.local\n+192.168.10.53\t\tcmp002.mcp-pike-odl-ha.local cmp002\n 192.168.10.52\t\tcmp001 cmp001.mcp-pike-odl-ha.local\n 192.168.10.24\t\tdbs01 dbs01.mcp-pike-odl-ha.local\n 192.168.10.25\t\tdbs02 dbs02.mcp-pike-odl-ha.local\n'}
2018-09-29 13:57:25,614 [salt.state       :1941][INFO    ][3918] Completed state [file.replace] at time 13:57:25.614565 duration_in_ms=14.515
2018-09-29 13:57:25,615 [salt.state       :1770][INFO    ][3918] Running state [cmp001] at time 13:57:25.614993
2018-09-29 13:57:25,615 [salt.state       :1803][INFO    ][3918] Executing state host.present for [cmp001]
2018-09-29 13:57:25,615 [salt.state       :290 ][INFO    ][3918] Host cmp001 (192.168.10.52) already present
2018-09-29 13:57:25,615 [salt.state       :1941][INFO    ][3918] Completed state [cmp001] at time 13:57:25.615827 duration_in_ms=0.834
2018-09-29 13:57:25,616 [salt.state       :1770][INFO    ][3918] Running state [cmp001.mcp-pike-odl-ha.local] at time 13:57:25.616159
2018-09-29 13:57:25,616 [salt.state       :1803][INFO    ][3918] Executing state host.present for [cmp001.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,616 [salt.state       :290 ][INFO    ][3918] Host cmp001.mcp-pike-odl-ha.local (192.168.10.52) already present
2018-09-29 13:57:25,616 [salt.state       :1941][INFO    ][3918] Completed state [cmp001.mcp-pike-odl-ha.local] at time 13:57:25.616935 duration_in_ms=0.776
2018-09-29 13:57:25,617 [salt.state       :1770][INFO    ][3918] Running state [dbs01] at time 13:57:25.617266
2018-09-29 13:57:25,617 [salt.state       :1803][INFO    ][3918] Executing state host.present for [dbs01]
2018-09-29 13:57:25,617 [salt.state       :290 ][INFO    ][3918] Host dbs01 (192.168.10.24) already present
2018-09-29 13:57:25,618 [salt.state       :1941][INFO    ][3918] Completed state [dbs01] at time 13:57:25.618010 duration_in_ms=0.744
2018-09-29 13:57:25,618 [salt.state       :1770][INFO    ][3918] Running state [dbs01.mcp-pike-odl-ha.local] at time 13:57:25.618332
2018-09-29 13:57:25,618 [salt.state       :1803][INFO    ][3918] Executing state host.present for [dbs01.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,618 [salt.state       :290 ][INFO    ][3918] Host dbs01.mcp-pike-odl-ha.local (192.168.10.24) already present
2018-09-29 13:57:25,619 [salt.state       :1941][INFO    ][3918] Completed state [dbs01.mcp-pike-odl-ha.local] at time 13:57:25.619077 duration_in_ms=0.745
2018-09-29 13:57:25,619 [salt.state       :1770][INFO    ][3918] Running state [dbs02] at time 13:57:25.619405
2018-09-29 13:57:25,619 [salt.state       :1803][INFO    ][3918] Executing state host.present for [dbs02]
2018-09-29 13:57:25,620 [salt.state       :290 ][INFO    ][3918] Host dbs02 (192.168.10.25) already present
2018-09-29 13:57:25,620 [salt.state       :1941][INFO    ][3918] Completed state [dbs02] at time 13:57:25.620345 duration_in_ms=0.94
2018-09-29 13:57:25,620 [salt.state       :1770][INFO    ][3918] Running state [dbs02.mcp-pike-odl-ha.local] at time 13:57:25.620681
2018-09-29 13:57:25,620 [salt.state       :1803][INFO    ][3918] Executing state host.present for [dbs02.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,621 [salt.state       :290 ][INFO    ][3918] Host dbs02.mcp-pike-odl-ha.local (192.168.10.25) already present
2018-09-29 13:57:25,621 [salt.state       :1941][INFO    ][3918] Completed state [dbs02.mcp-pike-odl-ha.local] at time 13:57:25.621420 duration_in_ms=0.739
2018-09-29 13:57:25,621 [salt.state       :1770][INFO    ][3918] Running state [dbs03] at time 13:57:25.621750
2018-09-29 13:57:25,621 [salt.state       :1803][INFO    ][3918] Executing state host.present for [dbs03]
2018-09-29 13:57:25,622 [salt.state       :290 ][INFO    ][3918] Host dbs03 (192.168.10.26) already present
2018-09-29 13:57:25,622 [salt.state       :1941][INFO    ][3918] Completed state [dbs03] at time 13:57:25.622487 duration_in_ms=0.738
2018-09-29 13:57:25,622 [salt.state       :1770][INFO    ][3918] Running state [dbs03.mcp-pike-odl-ha.local] at time 13:57:25.622819
2018-09-29 13:57:25,623 [salt.state       :1803][INFO    ][3918] Executing state host.present for [dbs03.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,623 [salt.state       :290 ][INFO    ][3918] Host dbs03.mcp-pike-odl-ha.local (192.168.10.26) already present
2018-09-29 13:57:25,623 [salt.state       :1941][INFO    ][3918] Completed state [dbs03.mcp-pike-odl-ha.local] at time 13:57:25.623550 duration_in_ms=0.731
2018-09-29 13:57:25,623 [salt.state       :1770][INFO    ][3918] Running state [odl01] at time 13:57:25.623881
2018-09-29 13:57:25,624 [salt.state       :1803][INFO    ][3918] Executing state host.present for [odl01]
2018-09-29 13:57:25,624 [salt.state       :290 ][INFO    ][3918] Host odl01 (192.168.10.39) already present
2018-09-29 13:57:25,624 [salt.state       :1941][INFO    ][3918] Completed state [odl01] at time 13:57:25.624610 duration_in_ms=0.729
2018-09-29 13:57:25,624 [salt.state       :1770][INFO    ][3918] Running state [odl01.mcp-pike-odl-ha.local] at time 13:57:25.624955
2018-09-29 13:57:25,625 [salt.state       :1803][INFO    ][3918] Executing state host.present for [odl01.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,625 [salt.state       :290 ][INFO    ][3918] Host odl01.mcp-pike-odl-ha.local (192.168.10.39) already present
2018-09-29 13:57:25,625 [salt.state       :1941][INFO    ][3918] Completed state [odl01.mcp-pike-odl-ha.local] at time 13:57:25.625687 duration_in_ms=0.731
2018-09-29 13:57:25,626 [salt.state       :1770][INFO    ][3918] Running state [mas01] at time 13:57:25.626015
2018-09-29 13:57:25,626 [salt.state       :1803][INFO    ][3918] Executing state host.present for [mas01]
2018-09-29 13:57:25,626 [salt.state       :290 ][INFO    ][3918] Host mas01 (192.168.10.12) already present
2018-09-29 13:57:25,626 [salt.state       :1941][INFO    ][3918] Completed state [mas01] at time 13:57:25.626748 duration_in_ms=0.732
2018-09-29 13:57:25,627 [salt.state       :1770][INFO    ][3918] Running state [mas01.mcp-pike-odl-ha.local] at time 13:57:25.627078
2018-09-29 13:57:25,627 [salt.state       :1803][INFO    ][3918] Executing state host.present for [mas01.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,627 [salt.state       :290 ][INFO    ][3918] Host mas01.mcp-pike-odl-ha.local (192.168.10.12) already present
2018-09-29 13:57:25,627 [salt.state       :1941][INFO    ][3918] Completed state [mas01.mcp-pike-odl-ha.local] at time 13:57:25.627801 duration_in_ms=0.724
2018-09-29 13:57:25,628 [salt.state       :1770][INFO    ][3918] Running state [ctl02] at time 13:57:25.628129
2018-09-29 13:57:25,628 [salt.state       :1803][INFO    ][3918] Executing state host.present for [ctl02]
2018-09-29 13:57:25,628 [salt.state       :290 ][INFO    ][3918] Host ctl02 (192.168.10.37) already present
2018-09-29 13:57:25,628 [salt.state       :1941][INFO    ][3918] Completed state [ctl02] at time 13:57:25.628863 duration_in_ms=0.733
2018-09-29 13:57:25,629 [salt.state       :1770][INFO    ][3918] Running state [ctl02.mcp-pike-odl-ha.local] at time 13:57:25.629192
2018-09-29 13:57:25,629 [salt.state       :1803][INFO    ][3918] Executing state host.present for [ctl02.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,629 [salt.state       :290 ][INFO    ][3918] Host ctl02.mcp-pike-odl-ha.local (192.168.10.37) already present
2018-09-29 13:57:25,629 [salt.state       :1941][INFO    ][3918] Completed state [ctl02.mcp-pike-odl-ha.local] at time 13:57:25.629913 duration_in_ms=0.721
2018-09-29 13:57:25,630 [salt.state       :1770][INFO    ][3918] Running state [ctl03] at time 13:57:25.630245
2018-09-29 13:57:25,630 [salt.state       :1803][INFO    ][3918] Executing state host.present for [ctl03]
2018-09-29 13:57:25,630 [salt.state       :290 ][INFO    ][3918] Host ctl03 (192.168.10.38) already present
2018-09-29 13:57:25,631 [salt.state       :1941][INFO    ][3918] Completed state [ctl03] at time 13:57:25.630980 duration_in_ms=0.736
2018-09-29 13:57:25,631 [salt.state       :1770][INFO    ][3918] Running state [ctl03.mcp-pike-odl-ha.local] at time 13:57:25.631314
2018-09-29 13:57:25,631 [salt.state       :1803][INFO    ][3918] Executing state host.present for [ctl03.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,631 [salt.state       :290 ][INFO    ][3918] Host ctl03.mcp-pike-odl-ha.local (192.168.10.38) already present
2018-09-29 13:57:25,632 [salt.state       :1941][INFO    ][3918] Completed state [ctl03.mcp-pike-odl-ha.local] at time 13:57:25.632046 duration_in_ms=0.732
2018-09-29 13:57:25,632 [salt.state       :1770][INFO    ][3918] Running state [ctl01] at time 13:57:25.632376
2018-09-29 13:57:25,632 [salt.state       :1803][INFO    ][3918] Executing state host.present for [ctl01]
2018-09-29 13:57:25,632 [salt.state       :290 ][INFO    ][3918] Host ctl01 (192.168.10.36) already present
2018-09-29 13:57:25,633 [salt.state       :1941][INFO    ][3918] Completed state [ctl01] at time 13:57:25.633121 duration_in_ms=0.745
2018-09-29 13:57:25,633 [salt.state       :1770][INFO    ][3918] Running state [ctl01.mcp-pike-odl-ha.local] at time 13:57:25.633456
2018-09-29 13:57:25,633 [salt.state       :1803][INFO    ][3918] Executing state host.present for [ctl01.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,634 [salt.state       :290 ][INFO    ][3918] Host ctl01.mcp-pike-odl-ha.local (192.168.10.36) already present
2018-09-29 13:57:25,634 [salt.state       :1941][INFO    ][3918] Completed state [ctl01.mcp-pike-odl-ha.local] at time 13:57:25.634186 duration_in_ms=0.729
2018-09-29 13:57:25,634 [salt.state       :1770][INFO    ][3918] Running state [ctl] at time 13:57:25.634526
2018-09-29 13:57:25,634 [salt.state       :1803][INFO    ][3918] Executing state host.present for [ctl]
2018-09-29 13:57:25,635 [salt.state       :290 ][INFO    ][3918] Host ctl (192.168.10.35) already present
2018-09-29 13:57:25,635 [salt.state       :1941][INFO    ][3918] Completed state [ctl] at time 13:57:25.635264 duration_in_ms=0.738
2018-09-29 13:57:25,635 [salt.state       :1770][INFO    ][3918] Running state [ctl.mcp-pike-odl-ha.local] at time 13:57:25.635602
2018-09-29 13:57:25,635 [salt.state       :1803][INFO    ][3918] Executing state host.present for [ctl.mcp-pike-odl-ha.local]
2018-09-29 13:57:25,636 [salt.state       :290 ][INFO    ][3918] Host ctl.mcp-pike-odl-ha.local (192.168.10.35) already present
2018-09-29 13:57:25,636 [salt.state       :1941][INFO    ][3918] Completed state [ctl.mcp-pike-odl-ha.local] at time 13:57:25.636337 duration_in_ms=0.736
2018-09-29 13:57:25,636 [salt.state       :1770][INFO    ][3918] Running state [linux_network_bridge_pkgs] at time 13:57:25.636526
2018-09-29 13:57:25,636 [salt.state       :1803][INFO    ][3918] Executing state pkg.installed for [linux_network_bridge_pkgs]
2018-09-29 13:57:25,644 [salt.state       :290 ][INFO    ][3918] All specified packages are already installed
2018-09-29 13:57:25,645 [salt.state       :1941][INFO    ][3918] Completed state [linux_network_bridge_pkgs] at time 13:57:25.644992 duration_in_ms=8.466
2018-09-29 13:57:25,645 [salt.state       :1770][INFO    ][3918] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 13:57:25.645187
2018-09-29 13:57:25,645 [salt.state       :1803][INFO    ][3918] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-09-29 13:57:25,645 [salt.state       :290 ][INFO    ][3918] File /etc/network/interfaces.d/50-cloud-init.cfg is not present
2018-09-29 13:57:25,645 [salt.state       :1941][INFO    ][3918] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 13:57:25.645793 duration_in_ms=0.606
2018-09-29 13:57:25,648 [salt.state       :1770][INFO    ][3918] Running state [ens2f1.1000] at time 13:57:25.648169
2018-09-29 13:57:25,648 [salt.state       :1803][INFO    ][3918] Executing state network.managed for [ens2f1.1000]
2018-09-29 13:57:25,754 [salt.state       :290 ][INFO    ][3918] Interface ens2f1.1000 is up to date.
2018-09-29 13:57:25,754 [salt.state       :1941][INFO    ][3918] Completed state [ens2f1.1000] at time 13:57:25.754667 duration_in_ms=106.498
2018-09-29 13:57:25,756 [salt.state       :1770][INFO    ][3918] Running state [br-mesh] at time 13:57:25.756190
2018-09-29 13:57:25,756 [salt.state       :1803][INFO    ][3918] Executing state network.managed for [br-mesh]
2018-09-29 13:57:25,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 13:57:25,776 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'bridge-utils'] in directory '/root'
2018-09-29 13:57:26,075 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 13:57:26,109 [salt.state       :290 ][INFO    ][3918] Interface br-mesh is up to date.
2018-09-29 13:57:26,109 [salt.state       :1941][INFO    ][3918] Completed state [br-mesh] at time 13:57:26.109788 duration_in_ms=353.598
2018-09-29 13:57:26,112 [salt.state       :1770][INFO    ][3918] Running state [ens2f0.81] at time 13:57:26.112160
2018-09-29 13:57:26,112 [salt.state       :1803][INFO    ][3918] Executing state network.managed for [ens2f0.81]
2018-09-29 13:57:26,125 [salt.state       :290 ][INFO    ][3918] Interface ens2f0.81 is up to date.
2018-09-29 13:57:26,126 [salt.state       :1941][INFO    ][3918] Completed state [ens2f0.81] at time 13:57:26.126028 duration_in_ms=13.868
2018-09-29 13:57:26,127 [salt.state       :1770][INFO    ][3918] Running state [br-ctl] at time 13:57:26.127569
2018-09-29 13:57:26,127 [salt.state       :1803][INFO    ][3918] Executing state network.managed for [br-ctl]
2018-09-29 13:57:26,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 13:57:26,147 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'bridge-utils'] in directory '/root'
2018-09-29 13:57:26,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 13:57:26,430 [salt.state       :290 ][INFO    ][3918] Interface br-ctl is up to date.
2018-09-29 13:57:26,430 [salt.state       :1941][INFO    ][3918] Completed state [br-ctl] at time 13:57:26.430756 duration_in_ms=303.185
2018-09-29 13:57:26,431 [salt.state       :1770][INFO    ][3918] Running state [/etc/network/interfaces] at time 13:57:26.431051
2018-09-29 13:57:26,431 [salt.state       :1803][INFO    ][3918] Executing state file.prepend for [/etc/network/interfaces]
2018-09-29 13:57:26,433 [salt.state       :290 ][INFO    ][3918] File changed:
--- 
+++ 
@@ -1,3 +1,6 @@
+source /etc/network/interfaces.d/*
+# Workaround for Upstream-Bug: https://github.com/saltstack/salt/issues/40262
+source /etc/network/interfaces.u/*
 auto lo
 iface lo inet loopback
 auto ens2f1.1000

2018-09-29 13:57:26,434 [salt.state       :1941][INFO    ][3918] Completed state [/etc/network/interfaces] at time 13:57:26.434002 duration_in_ms=2.951
2018-09-29 13:57:26,434 [salt.state       :1770][INFO    ][3918] Running state [/etc/network/interfaces.u/ifcfg-ens2f0.80] at time 13:57:26.434189
2018-09-29 13:57:26,434 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/network/interfaces.u/ifcfg-ens2f0.80]
2018-09-29 13:57:26,460 [salt.state       :290 ][INFO    ][3918] File /etc/network/interfaces.u/ifcfg-ens2f0.80 is in the correct state
2018-09-29 13:57:26,460 [salt.state       :1941][INFO    ][3918] Completed state [/etc/network/interfaces.u/ifcfg-ens2f0.80] at time 13:57:26.460438 duration_in_ms=26.249
2018-09-29 13:57:26,460 [salt.state       :1770][INFO    ][3918] Running state [/etc/network/interfaces] at time 13:57:26.460664
2018-09-29 13:57:26,460 [salt.state       :1803][INFO    ][3918] Executing state file.replace for [/etc/network/interfaces]
2018-09-29 13:57:26,461 [salt.state       :290 ][INFO    ][3918] No changes needed to be made
2018-09-29 13:57:26,462 [salt.state       :1941][INFO    ][3918] Completed state [/etc/network/interfaces] at time 13:57:26.461980 duration_in_ms=1.315
2018-09-29 13:57:26,462 [salt.state       :1770][INFO    ][3918] Running state [/etc/network/interfaces] at time 13:57:26.462177
2018-09-29 13:57:26,462 [salt.state       :1803][INFO    ][3918] Executing state file.replace for [/etc/network/interfaces]
2018-09-29 13:57:26,463 [salt.state       :290 ][INFO    ][3918] No changes needed to be made
2018-09-29 13:57:26,463 [salt.state       :1941][INFO    ][3918] Completed state [/etc/network/interfaces] at time 13:57:26.463458 duration_in_ms=1.28
2018-09-29 13:57:26,472 [salt.state       :1770][INFO    ][3918] Running state [br-floating] at time 13:57:26.472349
2018-09-29 13:57:26,472 [salt.state       :1803][INFO    ][3918] Executing state openvswitch_bridge.present for [br-floating]
2018-09-29 13:57:26,472 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'ovs-vsctl br-exists br-floating' in directory '/root'
2018-09-29 13:57:26,479 [salt.state       :290 ][INFO    ][3918] Bridge br-floating already exists.
2018-09-29 13:57:26,479 [salt.state       :1941][INFO    ][3918] Completed state [br-floating] at time 13:57:26.479699 duration_in_ms=7.35
2018-09-29 13:57:26,479 [salt.state       :1770][INFO    ][3918] Running state [/etc/network/interfaces] at time 13:57:26.479931
2018-09-29 13:57:26,480 [salt.state       :1803][INFO    ][3918] Executing state file.prepend for [/etc/network/interfaces]
2018-09-29 13:57:26,481 [salt.state       :290 ][INFO    ][3918] File /etc/network/interfaces is in correct state
2018-09-29 13:57:26,481 [salt.state       :1941][INFO    ][3918] Completed state [/etc/network/interfaces] at time 13:57:26.481572 duration_in_ms=1.641
2018-09-29 13:57:26,486 [salt.state       :1770][INFO    ][3918] Running state [ifup ens2f0.80] at time 13:57:26.486839
2018-09-29 13:57:26,487 [salt.state       :1803][INFO    ][3918] Executing state cmd.run for [ifup ens2f0.80]
2018-09-29 13:57:26,487 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'ip link show ens2f0.80 | grep -q '\<UP\>'' in directory '/root'
2018-09-29 13:57:26,493 [salt.state       :290 ][INFO    ][3918] unless execution succeeded
2018-09-29 13:57:26,493 [salt.state       :1941][INFO    ][3918] Completed state [ifup ens2f0.80] at time 13:57:26.493374 duration_in_ms=6.534
2018-09-29 13:57:26,493 [salt.state       :1770][INFO    ][3918] Running state [/etc/network/interfaces.u/ifcfg-br-floating] at time 13:57:26.493622
2018-09-29 13:57:26,493 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/network/interfaces.u/ifcfg-br-floating]
2018-09-29 13:57:26,517 [salt.state       :290 ][INFO    ][3918] File /etc/network/interfaces.u/ifcfg-br-floating is in the correct state
2018-09-29 13:57:26,518 [salt.state       :1941][INFO    ][3918] Completed state [/etc/network/interfaces.u/ifcfg-br-floating] at time 13:57:26.517976 duration_in_ms=24.355
2018-09-29 13:57:26,518 [salt.state       :1770][INFO    ][3918] Running state [/etc/network/interfaces] at time 13:57:26.518179
2018-09-29 13:57:26,518 [salt.state       :1803][INFO    ][3918] Executing state file.prepend for [/etc/network/interfaces]
2018-09-29 13:57:26,519 [salt.state       :290 ][INFO    ][3918] File /etc/network/interfaces is in correct state
2018-09-29 13:57:26,519 [salt.state       :1941][INFO    ][3918] Completed state [/etc/network/interfaces] at time 13:57:26.519534 duration_in_ms=1.355
2018-09-29 13:57:26,523 [salt.state       :1770][INFO    ][3918] Running state [ifup br-floating] at time 13:57:26.522990
2018-09-29 13:57:26,523 [salt.state       :1803][INFO    ][3918] Executing state cmd.run for [ifup br-floating]
2018-09-29 13:57:26,523 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'ip link show br-floating | grep -q '\<UP\>'' in directory '/root'
2018-09-29 13:57:26,529 [salt.state       :290 ][INFO    ][3918] unless execution succeeded
2018-09-29 13:57:26,529 [salt.state       :1941][INFO    ][3918] Completed state [ifup br-floating] at time 13:57:26.529458 duration_in_ms=6.467
2018-09-29 13:57:26,529 [salt.state       :1770][INFO    ][3918] Running state [ovs-vsctl add-port br-floating ens2f0.80] at time 13:57:26.529700
2018-09-29 13:57:26,529 [salt.state       :1803][INFO    ][3918] Executing state cmd.run for [ovs-vsctl add-port br-floating ens2f0.80]
2018-09-29 13:57:26,530 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command 'ovs-vsctl show | grep ens2f0.80' in directory '/root'
2018-09-29 13:57:26,537 [salt.state       :290 ][INFO    ][3918] unless execution succeeded
2018-09-29 13:57:26,537 [salt.state       :1941][INFO    ][3918] Completed state [ovs-vsctl add-port br-floating ens2f0.80] at time 13:57:26.537335 duration_in_ms=7.635
2018-09-29 13:57:26,537 [salt.state       :1770][INFO    ][3918] Running state [br-floating] at time 13:57:26.537586
2018-09-29 13:57:26,537 [salt.state       :1803][INFO    ][3918] Executing state network.routes for [br-floating]
2018-09-29 13:57:26,543 [salt.state       :290 ][INFO    ][3918] Interface br-floating routes are up to date.
2018-09-29 13:57:26,544 [salt.state       :1941][INFO    ][3918] Completed state [br-floating] at time 13:57:26.543998 duration_in_ms=6.412
2018-09-29 13:57:26,544 [salt.state       :1770][INFO    ][3918] Running state [eno1] at time 13:57:26.544207
2018-09-29 13:57:26,544 [salt.state       :1803][INFO    ][3918] Executing state network.managed for [eno1]
2018-09-29 13:57:26,557 [salt.state       :290 ][INFO    ][3918] Interface eno1 is up to date.
2018-09-29 13:57:26,558 [salt.state       :1941][INFO    ][3918] Completed state [eno1] at time 13:57:26.558132 duration_in_ms=13.925
2018-09-29 13:57:26,558 [salt.state       :1770][INFO    ][3918] Running state [ens2f0] at time 13:57:26.558366
2018-09-29 13:57:26,558 [salt.state       :1803][INFO    ][3918] Executing state network.managed for [ens2f0]
2018-09-29 13:57:26,571 [salt.state       :290 ][INFO    ][3918] Interface ens2f0 is up to date.
2018-09-29 13:57:26,571 [salt.state       :1941][INFO    ][3918] Completed state [ens2f0] at time 13:57:26.571839 duration_in_ms=13.472
2018-09-29 13:57:26,572 [salt.state       :1770][INFO    ][3918] Running state [ens2f1] at time 13:57:26.572082
2018-09-29 13:57:26,572 [salt.state       :1803][INFO    ][3918] Executing state network.managed for [ens2f1]
2018-09-29 13:57:26,586 [salt.state       :290 ][INFO    ][3918] Interface ens2f1 is up to date.
2018-09-29 13:57:26,586 [salt.state       :1941][INFO    ][3918] Completed state [ens2f1] at time 13:57:26.586443 duration_in_ms=14.361
2018-09-29 13:57:26,586 [salt.state       :1770][INFO    ][3918] Running state [/etc/network/interfaces] at time 13:57:26.586685
2018-09-29 13:57:26,586 [salt.state       :1803][INFO    ][3918] Executing state file.prepend for [/etc/network/interfaces]
2018-09-29 13:57:26,588 [salt.state       :290 ][INFO    ][3918] File changed:
--- 
+++ 
@@ -1,3 +1,6 @@
+source /etc/network/interfaces.d/*
+# Workaround for Upstream-Bug: https://github.com/saltstack/salt/issues/40262
+source /etc/network/interfaces.u/*
 auto lo
 iface lo inet loopback
 auto ens2f1.1000

2018-09-29 13:57:26,588 [salt.state       :1941][INFO    ][3918] Completed state [/etc/network/interfaces] at time 13:57:26.588383 duration_in_ms=1.698
2018-09-29 13:57:26,588 [salt.state       :1770][INFO    ][3918] Running state [/etc/profile.d/proxy.sh] at time 13:57:26.588571
2018-09-29 13:57:26,588 [salt.state       :1803][INFO    ][3918] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-09-29 13:57:26,589 [salt.state       :290 ][INFO    ][3918] File /etc/profile.d/proxy.sh is not present
2018-09-29 13:57:26,589 [salt.state       :1941][INFO    ][3918] Completed state [/etc/profile.d/proxy.sh] at time 13:57:26.589221 duration_in_ms=0.65
2018-09-29 13:57:26,589 [salt.state       :1770][INFO    ][3918] Running state [/etc/apt/apt.conf.d/95proxies] at time 13:57:26.589397
2018-09-29 13:57:26,589 [salt.state       :1803][INFO    ][3918] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-09-29 13:57:26,589 [salt.state       :290 ][INFO    ][3918] File /etc/apt/apt.conf.d/95proxies is not present
2018-09-29 13:57:26,589 [salt.state       :1941][INFO    ][3918] Completed state [/etc/apt/apt.conf.d/95proxies] at time 13:57:26.589941 duration_in_ms=0.544
2018-09-29 13:57:26,590 [salt.state       :1770][INFO    ][3918] Running state [linux_lvm_pkgs] at time 13:57:26.590122
2018-09-29 13:57:26,590 [salt.state       :1803][INFO    ][3918] Executing state pkg.installed for [linux_lvm_pkgs]
2018-09-29 13:57:26,597 [salt.state       :290 ][INFO    ][3918] All specified packages are already installed
2018-09-29 13:57:26,597 [salt.state       :1941][INFO    ][3918] Completed state [linux_lvm_pkgs] at time 13:57:26.597525 duration_in_ms=7.402
2018-09-29 13:57:26,599 [salt.state       :1770][INFO    ][3918] Running state [/etc/lvm/lvm.conf] at time 13:57:26.599211
2018-09-29 13:57:26,599 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/lvm/lvm.conf]
2018-09-29 13:57:26,626 [salt.fileclient  :1215][INFO    ][3918] Fetching file from saltenv 'base', ** done ** 'linux/files/lvm.conf'
2018-09-29 13:57:26,740 [salt.state       :290 ][INFO    ][3918] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 # This is an example configuration file for the LVM2 system.
 # It contains the default settings that would be used if there was no
 # /etc/lvm/lvm.conf file.
@@ -26,506 +27,509 @@
 # How LVM configuration settings are handled.
 config {
 
-	# Configuration option config/checks.
-	# If enabled, any LVM configuration mismatch is reported.
-	# This implies checking that the configuration key is understood by
-	# LVM and that the value of the key is the proper type. If disabled,
-	# any configuration mismatch is ignored and the default value is used
-	# without any warning (a message about the configuration key not being
-	# found is issued in verbose mode only).
-	checks = 1
-
-	# Configuration option config/abort_on_errors.
-	# Abort the LVM process if a configuration mismatch is found.
-	abort_on_errors = 0
-
-	# Configuration option config/profile_dir.
-	# Directory where LVM looks for configuration profiles.
-	profile_dir = "/etc/lvm/profile"
+        # Configuration option config/checks.
+        # If enabled, any LVM configuration mismatch is reported.
+        # This implies checking that the configuration key is understood by
+        # LVM and that the value of the key is the proper type. If disabled,
+        # any configuration mismatch is ignored and the default value is used
+        # without any warning (a message about the configuration key not being
+        # found is issued in verbose mode only).
+        checks = 1
+
+        # Configuration option config/abort_on_errors.
+        # Abort the LVM process if a configuration mismatch is found.
+        abort_on_errors = 0
+
+        # Configuration option config/profile_dir.
+        # Directory where LVM looks for configuration profiles.
+        profile_dir = "/etc/lvm/profile"
 }
 
 # Configuration section devices.
 # How LVM uses block devices.
 devices {
 
-	# Configuration option devices/dir.
-	# Directory in which to create volume group device nodes.
-	# Commands also accept this as a prefix on volume group names.
-	# This configuration option is advanced.
-	dir = "/dev"
-
-	# Configuration option devices/scan.
-	# Directories containing device nodes to use with LVM.
-	# This configuration option is advanced.
-	scan = [ "/dev" ]
-
-	# Configuration option devices/obtain_device_list_from_udev.
-	# Obtain the list of available devices from udev.
-	# This avoids opening or using any inapplicable non-block devices or
-	# subdirectories found in the udev directory. Any device node or
-	# symlink not managed by udev in the udev directory is ignored. This
-	# setting applies only to the udev-managed device directory; other
-	# directories will be scanned fully. LVM needs to be compiled with
-	# udev support for this setting to apply.
-	obtain_device_list_from_udev = 1
-
-	# Configuration option devices/external_device_info_source.
-	# Select an external device information source.
-	# Some information may already be available in the system and LVM can
-	# use this information to determine the exact type or use of devices it
-	# processes. Using an existing external device information source can
-	# speed up device processing as LVM does not need to run its own native
-	# routines to acquire this information. For example, this information
-	# is used to drive LVM filtering like MD component detection, multipath
-	# component detection, partition detection and others.
-	# 
-	# Accepted values:
-	#   none
-	#     No external device information source is used.
-	#   udev
-	#     Reuse existing udev database records. Applicable only if LVM is
-	#     compiled with udev support.
-	# 
-	external_device_info_source = "none"
-
-	# Configuration option devices/preferred_names.
-	# Select which path name to display for a block device.
-	# If multiple path names exist for a block device, and LVM needs to
-	# display a name for the device, the path names are matched against
-	# each item in this list of regular expressions. The first match is
-	# used. Try to avoid using undescriptive /dev/dm-N names, if present.
-	# If no preferred name matches, or if preferred_names are not defined,
-	# the following built-in preferences are applied in order until one
-	# produces a preferred name:
-	# Prefer names with path prefixes in the order of:
-	# /dev/mapper, /dev/disk, /dev/dm-*, /dev/block.
-	# Prefer the name with the least number of slashes.
-	# Prefer a name that is a symlink.
-	# Prefer the path with least value in lexicographical order.
-	# 
-	# Example
-	# preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ]
-	# 
-	# This configuration option does not have a default value defined.
-
-	# Configuration option devices/filter.
-	# Limit the block devices that are used by LVM commands.
-	# This is a list of regular expressions used to accept or reject block
-	# device path names. Each regex is delimited by a vertical bar '|'
-	# (or any character) and is preceded by 'a' to accept the path, or
-	# by 'r' to reject the path. The first regex in the list to match the
-	# path is used, producing the 'a' or 'r' result for the device.
-	# When multiple path names exist for a block device, if any path name
-	# matches an 'a' pattern before an 'r' pattern, then the device is
-	# accepted. If all the path names match an 'r' pattern first, then the
-	# device is rejected. Unmatching path names do not affect the accept
-	# or reject decision. If no path names for a device match a pattern,
-	# then the device is accepted. Be careful mixing 'a' and 'r' patterns,
-	# as the combination might produce unexpected results (test changes.)
-	# Run vgscan after changing the filter to regenerate the cache.
-	# See the use_lvmetad comment for a special case regarding filters.
-	# 
-	# Example
-	# Accept every block device:
-	# filter = [ "a|.*/|" ]
-	# Reject the cdrom drive:
-	# filter = [ "r|/dev/cdrom|" ]
-	# Work with just loopback devices, e.g. for testing:
-	# filter = [ "a|loop|", "r|.*|" ]
-	# Accept all loop devices and ide drives except hdc:
-	# filter = [ "a|loop|", "r|/dev/hdc|", "a|/dev/ide|", "r|.*|" ]
-	# Use anchors to be very specific:
-	# filter = [ "a|^/dev/hda8$|", "r|.*/|" ]
-	# 
-	# This configuration option has an automatic default value.
-	# filter = [ "a|.*/|" ]
-
-	# Configuration option devices/global_filter.
-	# Limit the block devices that are used by LVM system components.
-	# Because devices/filter may be overridden from the command line, it is
-	# not suitable for system-wide device filtering, e.g. udev and lvmetad.
-	# Use global_filter to hide devices from these LVM system components.
-	# The syntax is the same as devices/filter. Devices rejected by
-	# global_filter are not opened by LVM.
-	# This configuration option has an automatic default value.
-	# global_filter = [ "a|.*/|" ]
-
-	# Configuration option devices/cache_dir.
-	# Directory in which to store the device cache file.
-	# The results of filtering are cached on disk to avoid rescanning dud
-	# devices (which can take a very long time). By default this cache is
-	# stored in a file named .cache. It is safe to delete this file; the
-	# tools regenerate it. If obtain_device_list_from_udev is enabled, the
-	# list of devices is obtained from udev and any existing .cache file
-	# is removed.
-	cache_dir = "/run/lvm"
-
-	# Configuration option devices/cache_file_prefix.
-	# A prefix used before the .cache file name. See devices/cache_dir.
-	cache_file_prefix = ""
-
-	# Configuration option devices/write_cache_state.
-	# Enable/disable writing the cache file. See devices/cache_dir.
-	write_cache_state = 1
-
-	# Configuration option devices/types.
-	# List of additional acceptable block device types.
-	# These are of device type names from /proc/devices, followed by the
-	# maximum number of partitions.
-	# 
-	# Example
-	# types = [ "fd", 16 ]
-	# 
-	# This configuration option is advanced.
-	# This configuration option does not have a default value defined.
-
-	# Configuration option devices/sysfs_scan.
-	# Restrict device scanning to block devices appearing in sysfs.
-	# This is a quick way of filtering out block devices that are not
-	# present on the system. sysfs must be part of the kernel and mounted.)
-	sysfs_scan = 1
-
-	# Configuration option devices/multipath_component_detection.
-	# Ignore devices that are components of DM multipath devices.
-	multipath_component_detection = 1
-
-	# Configuration option devices/md_component_detection.
-	# Ignore devices that are components of software RAID (md) devices.
-	md_component_detection = 1
-
-	# Configuration option devices/fw_raid_component_detection.
-	# Ignore devices that are components of firmware RAID devices.
-	# LVM must use an external_device_info_source other than none for this
-	# detection to execute.
-	fw_raid_component_detection = 0
-
-	# Configuration option devices/md_chunk_alignment.
-	# Align PV data blocks with md device's stripe-width.
-	# This applies if a PV is placed directly on an md device.
-	md_chunk_alignment = 1
-
-	# Configuration option devices/default_data_alignment.
-	# Default alignment of the start of a PV data area in MB.
-	# If set to 0, a value of 64KiB will be used.
-	# Set to 1 for 1MiB, 2 for 2MiB, etc.
-	# This configuration option has an automatic default value.
-	# default_data_alignment = 1
-
-	# Configuration option devices/data_alignment_detection.
-	# Detect PV data alignment based on sysfs device information.
-	# The start of a PV data area will be a multiple of minimum_io_size or
-	# optimal_io_size exposed in sysfs. minimum_io_size is the smallest
-	# request the device can perform without incurring a read-modify-write
-	# penalty, e.g. MD chunk size. optimal_io_size is the device's
-	# preferred unit of receiving I/O, e.g. MD stripe width.
-	# minimum_io_size is used if optimal_io_size is undefined (0).
-	# If md_chunk_alignment is enabled, that detects the optimal_io_size.
-	# This setting takes precedence over md_chunk_alignment.
-	data_alignment_detection = 1
-
-	# Configuration option devices/data_alignment.
-	# Alignment of the start of a PV data area in KiB.
-	# If a PV is placed directly on an md device and md_chunk_alignment or
-	# data_alignment_detection are enabled, then this setting is ignored.
-	# Otherwise, md_chunk_alignment and data_alignment_detection are
-	# disabled if this is set. Set to 0 to use the default alignment or the
-	# page size, if larger.
-	data_alignment = 0
-
-	# Configuration option devices/data_alignment_offset_detection.
-	# Detect PV data alignment offset based on sysfs device information.
-	# The start of a PV aligned data area will be shifted by the
-	# alignment_offset exposed in sysfs. This offset is often 0, but may
-	# be non-zero. Certain 4KiB sector drives that compensate for windows
-	# partitioning will have an alignment_offset of 3584 bytes (sector 7
-	# is the lowest aligned logical block, the 4KiB sectors start at
-	# LBA -1, and consequently sector 63 is aligned on a 4KiB boundary).
-	# pvcreate --dataalignmentoffset will skip this detection.
-	data_alignment_offset_detection = 1
-
-	# Configuration option devices/ignore_suspended_devices.
-	# Ignore DM devices that have I/O suspended while scanning devices.
-	# Otherwise, LVM waits for a suspended device to become accessible.
-	# This should only be needed in recovery situations.
-	ignore_suspended_devices = 0
-
-	# Configuration option devices/ignore_lvm_mirrors.
-	# Do not scan 'mirror' LVs to avoid possible deadlocks.
-	# This avoids possible deadlocks when using the 'mirror' segment type.
-	# This setting determines whether LVs using the 'mirror' segment type
-	# are scanned for LVM labels. This affects the ability of mirrors to
-	# be used as physical volumes. If this setting is enabled, it is
-	# impossible to create VGs on top of mirror LVs, i.e. to stack VGs on
-	# mirror LVs. If this setting is disabled, allowing mirror LVs to be
-	# scanned, it may cause LVM processes and I/O to the mirror to become
-	# blocked. This is due to the way that the mirror segment type handles
-	# failures. In order for the hang to occur, an LVM command must be run
-	# just after a failure and before the automatic LVM repair process
-	# takes place, or there must be failures in multiple mirrors in the
-	# same VG at the same time with write failures occurring moments before
-	# a scan of the mirror's labels. The 'mirror' scanning problems do not
-	# apply to LVM RAID types like 'raid1' which handle failures in a
-	# different way, making them a better choice for VG stacking.
-	ignore_lvm_mirrors = 1
-
-	# Configuration option devices/disable_after_error_count.
-	# Number of I/O errors after which a device is skipped.
-	# During each LVM operation, errors received from each device are
-	# counted. If the counter of a device exceeds the limit set here,
-	# no further I/O is sent to that device for the remainder of the
-	# operation. Setting this to 0 disables the counters altogether.
-	disable_after_error_count = 0
-
-	# Configuration option devices/require_restorefile_with_uuid.
-	# Allow use of pvcreate --uuid without requiring --restorefile.
-	require_restorefile_with_uuid = 1
-
-	# Configuration option devices/pv_min_size.
-	# Minimum size in KiB of block devices which can be used as PVs.
-	# In a clustered environment all nodes must use the same value.
-	# Any value smaller than 512KiB is ignored. The previous built-in
-	# value was 512.
-	pv_min_size = 2048
-
-	# Configuration option devices/issue_discards.
-	# Issue discards to PVs that are no longer used by an LV.
-	# Discards are sent to an LV's underlying physical volumes when the LV
-	# is no longer using the physical volumes' space, e.g. lvremove,
-	# lvreduce. Discards inform the storage that a region is no longer
-	# used. Storage that supports discards advertise the protocol-specific
-	# way discards should be issued by the kernel (TRIM, UNMAP, or
-	# WRITE SAME with UNMAP bit set). Not all storage will support or
-	# benefit from discards, but SSDs and thinly provisioned LUNs
-	# generally do. If enabled, discards will only be issued if both the
-	# storage and kernel provide support.
-	issue_discards = 1
+        # Configuration option devices/dir.
+        # Directory in which to create volume group device nodes.
+        # Commands also accept this as a prefix on volume group names.
+        # This configuration option is advanced.
+        dir = "/dev"
+
+        # Configuration option devices/scan.
+        # Directories containing device nodes to use with LVM.
+        # This configuration option is advanced.
+        scan = [ "/dev" ]
+
+        # Configuration option devices/obtain_device_list_from_udev.
+        # Obtain the list of available devices from udev.
+        # This avoids opening or using any inapplicable non-block devices or
+        # subdirectories found in the udev directory. Any device node or
+        # symlink not managed by udev in the udev directory is ignored. This
+        # setting applies only to the udev-managed device directory; other
+        # directories will be scanned fully. LVM needs to be compiled with
+        # udev support for this setting to apply.
+        obtain_device_list_from_udev = 1
+
+        # Configuration option devices/external_device_info_source.
+        # Select an external device information source.
+        # Some information may already be available in the system and LVM can
+        # use this information to determine the exact type or use of devices it
+        # processes. Using an existing external device information source can
+        # speed up device processing as LVM does not need to run its own native
+        # routines to acquire this information. For example, this information
+        # is used to drive LVM filtering like MD component detection, multipath
+        # component detection, partition detection and others.
+        # 
+        # Accepted values:
+        #   none
+        #     No external device information source is used.
+        #   udev
+        #     Reuse existing udev database records. Applicable only if LVM is
+        #     compiled with udev support.
+        # 
+        external_device_info_source = "none"
+
+        # Configuration option devices/preferred_names.
+        # Select which path name to display for a block device.
+        # If multiple path names exist for a block device, and LVM needs to
+        # display a name for the device, the path names are matched against
+        # each item in this list of regular expressions. The first match is
+        # used. Try to avoid using undescriptive /dev/dm-N names, if present.
+        # If no preferred name matches, or if preferred_names are not defined,
+        # the following built-in preferences are applied in order until one
+        # produces a preferred name:
+        # Prefer names with path prefixes in the order of:
+        # /dev/mapper, /dev/disk, /dev/dm-*, /dev/block.
+        # Prefer the name with the least number of slashes.
+        # Prefer a name that is a symlink.
+        # Prefer the path with least value in lexicographical order.
+        # 
+        # Example
+        # preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ]
+        # 
+        # This configuration option does not have a default value defined.
+
+        # Configuration option devices/filter.
+        # Limit the block devices that are used by LVM commands.
+        # This is a list of regular expressions used to accept or reject block
+        # device path names. Each regex is delimited by a vertical bar '|'
+        # (or any character) and is preceded by 'a' to accept the path, or
+        # by 'r' to reject the path. The first regex in the list to match the
+        # path is used, producing the 'a' or 'r' result for the device.
+        # When multiple path names exist for a block device, if any path name
+        # matches an 'a' pattern before an 'r' pattern, then the device is
+        # accepted. If all the path names match an 'r' pattern first, then the
+        # device is rejected. Unmatching path names do not affect the accept
+        # or reject decision. If no path names for a device match a pattern,
+        # then the device is accepted. Be careful mixing 'a' and 'r' patterns,
+        # as the combination might produce unexpected results (test changes.)
+        # Run vgscan after changing the filter to regenerate the cache.
+        # See the use_lvmetad comment for a special case regarding filters.
+        # 
+        # Example
+        # Accept every block device:
+
+        filter = ["a|/dev/sda1*|", "r|.*|" ]
+
+        # filter = [ "a|.*/|" ]
+        # Reject the cdrom drive:
+        # filter = [ "r|/dev/cdrom|" ]
+        # Work with just loopback devices, e.g. for testing:
+        # filter = [ "a|loop|", "r|.*|" ]
+        # Accept all loop devices and ide drives except hdc:
+        # filter = [ "a|loop|", "r|/dev/hdc|", "a|/dev/ide|", "r|.*|" ]
+        # Use anchors to be very specific:
+        # filter = [ "a|^/dev/hda8$|", "r|.*/|" ]
+        # 
+        # This configuration option has an automatic default value.
+        # filter = [ "a|.*/|" ]
+
+        # Configuration option devices/global_filter.
+        # Limit the block devices that are used by LVM system components.
+        # Because devices/filter may be overridden from the command line, it is
+        # not suitable for system-wide device filtering, e.g. udev and lvmetad.
+        # Use global_filter to hide devices from these LVM system components.
+        # The syntax is the same as devices/filter. Devices rejected by
+        # global_filter are not opened by LVM.
+        # This configuration option has an automatic default value.
+        # global_filter = [ "a|.*/|" ]
+
+        # Configuration option devices/cache_dir.
+        # Directory in which to store the device cache file.
+        # The results of filtering are cached on disk to avoid rescanning dud
+        # devices (which can take a very long time). By default this cache is
+        # stored in a file named .cache. It is safe to delete this file; the
+        # tools regenerate it. If obtain_device_list_from_udev is enabled, the
+        # list of devices is obtained from udev and any existing .cache file
+        # is removed.
+        cache_dir = "/run/lvm"
+
+        # Configuration option devices/cache_file_prefix.
+        # A prefix used before the .cache file name. See devices/cache_dir.
+        cache_file_prefix = ""
+
+        # Configuration option devices/write_cache_state.
+        # Enable/disable writing the cache file. See devices/cache_dir.
+        write_cache_state = 1
+
+        # Configuration option devices/types.
+        # List of additional acceptable block device types.
+        # These are of device type names from /proc/devices, followed by the
+        # maximum number of partitions.
+        # 
+        # Example
+        # types = [ "fd", 16 ]
+        # 
+        # This configuration option is advanced.
+        # This configuration option does not have a default value defined.
+
+        # Configuration option devices/sysfs_scan.
+        # Restrict device scanning to block devices appearing in sysfs.
+        # This is a quick way of filtering out block devices that are not
+        # present on the system. sysfs must be part of the kernel and mounted.)
+        sysfs_scan = 1
+
+        # Configuration option devices/multipath_component_detection.
+        # Ignore devices that are components of DM multipath devices.
+        multipath_component_detection = 1
+
+        # Configuration option devices/md_component_detection.
+        # Ignore devices that are components of software RAID (md) devices.
+        md_component_detection = 1
+
+        # Configuration option devices/fw_raid_component_detection.
+        # Ignore devices that are components of firmware RAID devices.
+        # LVM must use an external_device_info_source other than none for this
+        # detection to execute.
+        fw_raid_component_detection = 0
+
+        # Configuration option devices/md_chunk_alignment.
+        # Align PV data blocks with md device's stripe-width.
+        # This applies if a PV is placed directly on an md device.
+        md_chunk_alignment = 1
+
+        # Configuration option devices/default_data_alignment.
+        # Default alignment of the start of a PV data area in MB.
+        # If set to 0, a value of 64KiB will be used.
+        # Set to 1 for 1MiB, 2 for 2MiB, etc.
+        # This configuration option has an automatic default value.
+        # default_data_alignment = 1
+
+        # Configuration option devices/data_alignment_detection.
+        # Detect PV data alignment based on sysfs device information.
+        # The start of a PV data area will be a multiple of minimum_io_size or
+        # optimal_io_size exposed in sysfs. minimum_io_size is the smallest
+        # request the device can perform without incurring a read-modify-write
+        # penalty, e.g. MD chunk size. optimal_io_size is the device's
+        # preferred unit of receiving I/O, e.g. MD stripe width.
+        # minimum_io_size is used if optimal_io_size is undefined (0).
+        # If md_chunk_alignment is enabled, that detects the optimal_io_size.
+        # This setting takes precedence over md_chunk_alignment.
+        data_alignment_detection = 1
+
+        # Configuration option devices/data_alignment.
+        # Alignment of the start of a PV data area in KiB.
+        # If a PV is placed directly on an md device and md_chunk_alignment or
+        # data_alignment_detection are enabled, then this setting is ignored.
+        # Otherwise, md_chunk_alignment and data_alignment_detection are
+        # disabled if this is set. Set to 0 to use the default alignment or the
+        # page size, if larger.
+        data_alignment = 0
+
+        # Configuration option devices/data_alignment_offset_detection.
+        # Detect PV data alignment offset based on sysfs device information.
+        # The start of a PV aligned data area will be shifted by the
+        # alignment_offset exposed in sysfs. This offset is often 0, but may
+        # be non-zero. Certain 4KiB sector drives that compensate for windows
+        # partitioning will have an alignment_offset of 3584 bytes (sector 7
+        # is the lowest aligned logical block, the 4KiB sectors start at
+        # LBA -1, and consequently sector 63 is aligned on a 4KiB boundary).
+        # pvcreate --dataalignmentoffset will skip this detection.
+        data_alignment_offset_detection = 1
+
+        # Configuration option devices/ignore_suspended_devices.
+        # Ignore DM devices that have I/O suspended while scanning devices.
+        # Otherwise, LVM waits for a suspended device to become accessible.
+        # This should only be needed in recovery situations.
+        ignore_suspended_devices = 0
+
+        # Configuration option devices/ignore_lvm_mirrors.
+        # Do not scan 'mirror' LVs to avoid possible deadlocks.
+        # This avoids possible deadlocks when using the 'mirror' segment type.
+        # This setting determines whether LVs using the 'mirror' segment type
+        # are scanned for LVM labels. This affects the ability of mirrors to
+        # be used as physical volumes. If this setting is enabled, it is
+        # impossible to create VGs on top of mirror LVs, i.e. to stack VGs on
+        # mirror LVs. If this setting is disabled, allowing mirror LVs to be
+        # scanned, it may cause LVM processes and I/O to the mirror to become
+        # blocked. This is due to the way that the mirror segment type handles
+        # failures. In order for the hang to occur, an LVM command must be run
+        # just after a failure and before the automatic LVM repair process
+        # takes place, or there must be failures in multiple mirrors in the
+        # same VG at the same time with write failures occurring moments before
+        # a scan of the mirror's labels. The 'mirror' scanning problems do not
+        # apply to LVM RAID types like 'raid1' which handle failures in a
+        # different way, making them a better choice for VG stacking.
+        ignore_lvm_mirrors = 1
+
+        # Configuration option devices/disable_after_error_count.
+        # Number of I/O errors after which a device is skipped.
+        # During each LVM operation, errors received from each device are
+        # counted. If the counter of a device exceeds the limit set here,
+        # no further I/O is sent to that device for the remainder of the
+        # operation. Setting this to 0 disables the counters altogether.
+        disable_after_error_count = 0
+
+        # Configuration option devices/require_restorefile_with_uuid.
+        # Allow use of pvcreate --uuid without requiring --restorefile.
+        require_restorefile_with_uuid = 1
+
+        # Configuration option devices/pv_min_size.
+        # Minimum size in KiB of block devices which can be used as PVs.
+        # In a clustered environment all nodes must use the same value.
+        # Any value smaller than 512KiB is ignored. The previous built-in
+        # value was 512.
+        pv_min_size = 2048
+
+        # Configuration option devices/issue_discards.
+        # Issue discards to PVs that are no longer used by an LV.
+        # Discards are sent to an LV's underlying physical volumes when the LV
+        # is no longer using the physical volumes' space, e.g. lvremove,
+        # lvreduce. Discards inform the storage that a region is no longer
+        # used. Storage that supports discards advertise the protocol-specific
+        # way discards should be issued by the kernel (TRIM, UNMAP, or
+        # WRITE SAME with UNMAP bit set). Not all storage will support or
+        # benefit from discards, but SSDs and thinly provisioned LUNs
+        # generally do. If enabled, discards will only be issued if both the
+        # storage and kernel provide support.
+        issue_discards = 1
 }
 
 # Configuration section allocation.
 # How LVM selects space and applies properties to LVs.
 allocation {
 
-	# Configuration option allocation/cling_tag_list.
-	# Advise LVM which PVs to use when searching for new space.
-	# When searching for free space to extend an LV, the 'cling' allocation
-	# policy will choose space on the same PVs as the last segment of the
-	# existing LV. If there is insufficient space and a list of tags is
-	# defined here, it will check whether any of them are attached to the
-	# PVs concerned and then seek to match those PV tags between existing
-	# extents and new extents.
-	# 
-	# Example
-	# Use the special tag "@*" as a wildcard to match any PV tag:
-	# cling_tag_list = [ "@*" ]
-	# LVs are mirrored between two sites within a single VG, and
-	# PVs are tagged with either @site1 or @site2 to indicate where
-	# they are situated:
-	# cling_tag_list = [ "@site1", "@site2" ]
-	# 
-	# This configuration option does not have a default value defined.
-
-	# Configuration option allocation/maximise_cling.
-	# Use a previous allocation algorithm.
-	# Changes made in version 2.02.85 extended the reach of the 'cling'
-	# policies to detect more situations where data can be grouped onto
-	# the same disks. This setting can be used to disable the changes
-	# and revert to the previous algorithm.
-	maximise_cling = 1
-
-	# Configuration option allocation/use_blkid_wiping.
-	# Use blkid to detect existing signatures on new PVs and LVs.
-	# The blkid library can detect more signatures than the native LVM
-	# detection code, but may take longer. LVM needs to be compiled with
-	# blkid wiping support for this setting to apply. LVM native detection
-	# code is currently able to recognize: MD device signatures,
-	# swap signature, and LUKS signatures. To see the list of signatures
-	# recognized by blkid, check the output of the 'blkid -k' command.
-	use_blkid_wiping = 1
-
-	# Configuration option allocation/wipe_signatures_when_zeroing_new_lvs.
-	# Look for and erase any signatures while zeroing a new LV.
-	# The --wipesignatures option overrides this setting.
-	# Zeroing is controlled by the -Z/--zero option, and if not specified,
-	# zeroing is used by default if possible. Zeroing simply overwrites the
-	# first 4KiB of a new LV with zeroes and does no signature detection or
-	# wiping. Signature wiping goes beyond zeroing and detects exact types
-	# and positions of signatures within the whole LV. It provides a
-	# cleaner LV after creation as all known signatures are wiped. The LV
-	# is not claimed incorrectly by other tools because of old signatures
-	# from previous use. The number of signatures that LVM can detect
-	# depends on the detection code that is selected (see
-	# use_blkid_wiping.) Wiping each detected signature must be confirmed.
-	# When this setting is disabled, signatures on new LVs are not detected
-	# or erased unless the --wipesignatures option is used directly.
-	wipe_signatures_when_zeroing_new_lvs = 1
-
-	# Configuration option allocation/mirror_logs_require_separate_pvs.
-	# Mirror logs and images will always use different PVs.
-	# The default setting changed in version 2.02.85.
-	mirror_logs_require_separate_pvs = 0
-
-	# Configuration option allocation/cache_pool_metadata_require_separate_pvs.
-	# Cache pool metadata and data will always use different PVs.
-	cache_pool_metadata_require_separate_pvs = 0
-
-	# Configuration option allocation/cache_mode.
-	# The default cache mode used for new cache.
-	# 
-	# Accepted values:
-	#   writethrough
-	#     Data blocks are immediately written from the cache to disk.
-	#   writeback
-	#     Data blocks are written from the cache back to disk after some
-	#     delay to improve performance.
-	# 
-	# This setting replaces allocation/cache_pool_cachemode.
-	# This configuration option has an automatic default value.
-	# cache_mode = "writethrough"
-
-	# Configuration option allocation/cache_policy.
-	# The default cache policy used for new cache volume.
-	# Since kernel 4.2 the default policy is smq (Stochastic multique),
-	# otherwise the older mq (Multiqueue) policy is selected.
-	# This configuration option does not have a default value defined.
-
-	# Configuration section allocation/cache_settings.
-	# Settings for the cache policy.
-	# See documentation for individual cache policies for more info.
-	# This configuration section has an automatic default value.
-	# cache_settings {
-	# }
-
-	# Configuration option allocation/cache_pool_chunk_size.
-	# The minimal chunk size in KiB for cache pool volumes.
-	# Using a chunk_size that is too large can result in wasteful use of
-	# the cache, where small reads and writes can cause large sections of
-	# an LV to be mapped into the cache. However, choosing a chunk_size
-	# that is too small can result in more overhead trying to manage the
-	# numerous chunks that become mapped into the cache. The former is
-	# more of a problem than the latter in most cases, so the default is
-	# on the smaller end of the spectrum. Supported values range from
-	# 32KiB to 1GiB in multiples of 32.
-	# This configuration option does not have a default value defined.
-
-	# Configuration option allocation/thin_pool_metadata_require_separate_pvs.
-	# Thin pool metdata and data will always use different PVs.
-	thin_pool_metadata_require_separate_pvs = 0
-
-	# Configuration option allocation/thin_pool_zero.
-	# Thin pool data chunks are zeroed before they are first used.
-	# Zeroing with a larger thin pool chunk size reduces performance.
-	# This configuration option has an automatic default value.
-	# thin_pool_zero = 1
-
-	# Configuration option allocation/thin_pool_discards.
-	# The discards behaviour of thin pool volumes.
-	# 
-	# Accepted values:
-	#   ignore
-	#   nopassdown
-	#   passdown
-	# 
-	# This configuration option has an automatic default value.
-	# thin_pool_discards = "passdown"
-
-	# Configuration option allocation/thin_pool_chunk_size_policy.
-	# The chunk size calculation policy for thin pool volumes.
-	# 
-	# Accepted values:
-	#   generic
-	#     If thin_pool_chunk_size is defined, use it. Otherwise, calculate
-	#     the chunk size based on estimation and device hints exposed in
-	#     sysfs - the minimum_io_size. The chunk size is always at least
-	#     64KiB.
-	#   performance
-	#     If thin_pool_chunk_size is defined, use it. Otherwise, calculate
-	#     the chunk size for performance based on device hints exposed in
-	#     sysfs - the optimal_io_size. The chunk size is always at least
-	#     512KiB.
-	# 
-	# This configuration option has an automatic default value.
-	# thin_pool_chunk_size_policy = "generic"
-
-	# Configuration option allocation/thin_pool_chunk_size.
-	# The minimal chunk size in KiB for thin pool volumes.
-	# Larger chunk sizes may improve performance for plain thin volumes,
-	# however using them for snapshot volumes is less efficient, as it
-	# consumes more space and takes extra time for copying. When unset,
-	# lvm tries to estimate chunk size starting from 64KiB. Supported
-	# values are in the range 64KiB to 1GiB.
-	# This configuration option does not have a default value defined.
-
-	# Configuration option allocation/physical_extent_size.
-	# Default physical extent size in KiB to use for new VGs.
-	# This configuration option has an automatic default value.
-	# physical_extent_size = 4096
+        # Configuration option allocation/cling_tag_list.
+        # Advise LVM which PVs to use when searching for new space.
+        # When searching for free space to extend an LV, the 'cling' allocation
+        # policy will choose space on the same PVs as the last segment of the
+        # existing LV. If there is insufficient space and a list of tags is
+        # defined here, it will check whether any of them are attached to the
+        # PVs concerned and then seek to match those PV tags between existing
+        # extents and new extents.
+        # 
+        # Example
+        # Use the special tag "@*" as a wildcard to match any PV tag:
+        # cling_tag_list = [ "@*" ]
+        # LVs are mirrored between two sites within a single VG, and
+        # PVs are tagged with either @site1 or @site2 to indicate where
+        # they are situated:
+        # cling_tag_list = [ "@site1", "@site2" ]
+        # 
+        # This configuration option does not have a default value defined.
+
+        # Configuration option allocation/maximise_cling.
+        # Use a previous allocation algorithm.
+        # Changes made in version 2.02.85 extended the reach of the 'cling'
+        # policies to detect more situations where data can be grouped onto
+        # the same disks. This setting can be used to disable the changes
+        # and revert to the previous algorithm.
+        maximise_cling = 1
+
+        # Configuration option allocation/use_blkid_wiping.
+        # Use blkid to detect existing signatures on new PVs and LVs.
+        # The blkid library can detect more signatures than the native LVM
+        # detection code, but may take longer. LVM needs to be compiled with
+        # blkid wiping support for this setting to apply. LVM native detection
+        # code is currently able to recognize: MD device signatures,
+        # swap signature, and LUKS signatures. To see the list of signatures
+        # recognized by blkid, check the output of the 'blkid -k' command.
+        use_blkid_wiping = 1
+
+        # Configuration option allocation/wipe_signatures_when_zeroing_new_lvs.
+        # Look for and erase any signatures while zeroing a new LV.
+        # The --wipesignatures option overrides this setting.
+        # Zeroing is controlled by the -Z/--zero option, and if not specified,
+        # zeroing is used by default if possible. Zeroing simply overwrites the
+        # first 4KiB of a new LV with zeroes and does no signature detection or
+        # wiping. Signature wiping goes beyond zeroing and detects exact types
+        # and positions of signatures within the whole LV. It provides a
+        # cleaner LV after creation as all known signatures are wiped. The LV
+        # is not claimed incorrectly by other tools because of old signatures
+        # from previous use. The number of signatures that LVM can detect
+        # depends on the detection code that is selected (see
+        # use_blkid_wiping.) Wiping each detected signature must be confirmed.
+        # When this setting is disabled, signatures on new LVs are not detected
+        # or erased unless the --wipesignatures option is used directly.
+        wipe_signatures_when_zeroing_new_lvs = 1
+
+        # Configuration option allocation/mirror_logs_require_separate_pvs.
+        # Mirror logs and images will always use different PVs.
+        # The default setting changed in version 2.02.85.
+        mirror_logs_require_separate_pvs = 0
+
+        # Configuration option allocation/cache_pool_metadata_require_separate_pvs.
+        # Cache pool metadata and data will always use different PVs.
+        cache_pool_metadata_require_separate_pvs = 0
+
+        # Configuration option allocation/cache_mode.
+        # The default cache mode used for new cache.
+        # 
+        # Accepted values:
+        #   writethrough
+        #     Data blocks are immediately written from the cache to disk.
+        #   writeback
+        #     Data blocks are written from the cache back to disk after some
+        #     delay to improve performance.
+        # 
+        # This setting replaces allocation/cache_pool_cachemode.
+        # This configuration option has an automatic default value.
+        # cache_mode = "writethrough"
+
+        # Configuration option allocation/cache_policy.
+        # The default cache policy used for new cache volume.
+        # Since kernel 4.2 the default policy is smq (Stochastic multique),
+        # otherwise the older mq (Multiqueue) policy is selected.
+        # This configuration option does not have a default value defined.
+
+        # Configuration section allocation/cache_settings.
+        # Settings for the cache policy.
+        # See documentation for individual cache policies for more info.
+        # This configuration section has an automatic default value.
+        # cache_settings {
+        # }
+
+        # Configuration option allocation/cache_pool_chunk_size.
+        # The minimal chunk size in KiB for cache pool volumes.
+        # Using a chunk_size that is too large can result in wasteful use of
+        # the cache, where small reads and writes can cause large sections of
+        # an LV to be mapped into the cache. However, choosing a chunk_size
+        # that is too small can result in more overhead trying to manage the
+        # numerous chunks that become mapped into the cache. The former is
+        # more of a problem than the latter in most cases, so the default is
+        # on the smaller end of the spectrum. Supported values range from
+        # 32KiB to 1GiB in multiples of 32.
+        # This configuration option does not have a default value defined.
+
+        # Configuration option allocation/thin_pool_metadata_require_separate_pvs.
+        # Thin pool metdata and data will always use different PVs.
+        thin_pool_metadata_require_separate_pvs = 0
+
+        # Configuration option allocation/thin_pool_zero.
+        # Thin pool data chunks are zeroed before they are first used.
+        # Zeroing with a larger thin pool chunk size reduces performance.
+        # This configuration option has an automatic default value.
+        # thin_pool_zero = 1
+
+        # Configuration option allocation/thin_pool_discards.
+        # The discards behaviour of thin pool volumes.
+        # 
+        # Accepted values:
+        #   ignore
+        #   nopassdown
+        #   passdown
+        # 
+        # This configuration option has an automatic default value.
+        # thin_pool_discards = "passdown"
+
+        # Configuration option allocation/thin_pool_chunk_size_policy.
+        # The chunk size calculation policy for thin pool volumes.
+        # 
+        # Accepted values:
+        #   generic
+        #     If thin_pool_chunk_size is defined, use it. Otherwise, calculate
+        #     the chunk size based on estimation and device hints exposed in
+        #     sysfs - the minimum_io_size. The chunk size is always at least
+        #     64KiB.
+        #   performance
+        #     If thin_pool_chunk_size is defined, use it. Otherwise, calculate
+        #     the chunk size for performance based on device hints exposed in
+        #     sysfs - the optimal_io_size. The chunk size is always at least
+        #     512KiB.
+        # 
+        # This configuration option has an automatic default value.
+        # thin_pool_chunk_size_policy = "generic"
+
+        # Configuration option allocation/thin_pool_chunk_size.
+        # The minimal chunk size in KiB for thin pool volumes.
+        # Larger chunk sizes may improve performance for plain thin volumes,
+        # however using them for snapshot volumes is less efficient, as it
+        # consumes more space and takes extra time for copying. When unset,
+        # lvm tries to estimate chunk size starting from 64KiB. Supported
+        # values are in the range 64KiB to 1GiB.
+        # This configuration option does not have a default value defined.
+
+        # Configuration option allocation/physical_extent_size.
+        # Default physical extent size in KiB to use for new VGs.
+        # This configuration option has an automatic default value.
+        # physical_extent_size = 4096
 }
 
 # Configuration section log.
 # How LVM log information is reported.
 log {
 
-	# Configuration option log/verbose.
-	# Controls the messages sent to stdout or stderr.
-	verbose = 0
-
-	# Configuration option log/silent.
-	# Suppress all non-essential messages from stdout.
-	# This has the same effect as -qq. When enabled, the following commands
-	# still produce output: dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck,
-	# pvdisplay, pvs, version, vgcfgrestore -l, vgdisplay, vgs.
-	# Non-essential messages are shifted from log level 4 to log level 5
-	# for syslog and lvm2_log_fn purposes.
-	# Any 'yes' or 'no' questions not overridden by other arguments are
-	# suppressed and default to 'no'.
-	silent = 0
-
-	# Configuration option log/syslog.
-	# Send log messages through syslog.
-	syslog = 1
-
-	# Configuration option log/file.
-	# Write error and debug log messages to a file specified here.
-	# This configuration option does not have a default value defined.
-
-	# Configuration option log/overwrite.
-	# Overwrite the log file each time the program is run.
-	overwrite = 0
-
-	# Configuration option log/level.
-	# The level of log messages that are sent to the log file or syslog.
-	# There are 6 syslog-like log levels currently in use: 2 to 7 inclusive.
-	# 7 is the most verbose (LOG_DEBUG).
-	level = 0
-
-	# Configuration option log/indent.
-	# Indent messages according to their severity.
-	indent = 1
-
-	# Configuration option log/command_names.
-	# Display the command name on each line of output.
-	command_names = 0
-
-	# Configuration option log/prefix.
-	# A prefix to use before the log message text.
-	# (After the command name, if selected).
-	# Two spaces allows you to see/grep the severity of each message.
-	# To make the messages look similar to the original LVM tools use:
-	# indent = 0, command_names = 1, prefix = " -- "
-	prefix = "  "
-
-	# Configuration option log/activation.
-	# Log messages during activation.
-	# Don't use this in low memory situations (can deadlock).
-	activation = 0
-
-	# Configuration option log/debug_classes.
-	# Select log messages by class.
-	# Some debugging messages are assigned to a class and only appear in
-	# debug output if the class is listed here. Classes currently
-	# available: memory, devices, activation, allocation, lvmetad,
-	# metadata, cache, locking, lvmpolld. Use "all" to see everything.
-	debug_classes = [ "memory", "devices", "activation", "allocation", "lvmetad", "metadata", "cache", "locking", "lvmpolld" ]
+        # Configuration option log/verbose.
+        # Controls the messages sent to stdout or stderr.
+        verbose = 0
+
+        # Configuration option log/silent.
+        # Suppress all non-essential messages from stdout.
+        # This has the same effect as -qq. When enabled, the following commands
+        # still produce output: dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck,
+        # pvdisplay, pvs, version, vgcfgrestore -l, vgdisplay, vgs.
+        # Non-essential messages are shifted from log level 4 to log level 5
+        # for syslog and lvm2_log_fn purposes.
+        # Any 'yes' or 'no' questions not overridden by other arguments are
+        # suppressed and default to 'no'.
+        silent = 0
+
+        # Configuration option log/syslog.
+        # Send log messages through syslog.
+        syslog = 1
+
+        # Configuration option log/file.
+        # Write error and debug log messages to a file specified here.
+        # This configuration option does not have a default value defined.
+
+        # Configuration option log/overwrite.
+        # Overwrite the log file each time the program is run.
+        overwrite = 0
+
+        # Configuration option log/level.
+        # The level of log messages that are sent to the log file or syslog.
+        # There are 6 syslog-like log levels currently in use: 2 to 7 inclusive.
+        # 7 is the most verbose (LOG_DEBUG).
+        level = 0
+
+        # Configuration option log/indent.
+        # Indent messages according to their severity.
+        indent = 1
+
+        # Configuration option log/command_names.
+        # Display the command name on each line of output.
+        command_names = 0
+
+        # Configuration option log/prefix.
+        # A prefix to use before the log message text.
+        # (After the command name, if selected).
+        # Two spaces allows you to see/grep the severity of each message.
+        # To make the messages look similar to the original LVM tools use:
+        # indent = 0, command_names = 1, prefix = " -- "
+        prefix = "  "
+
+        # Configuration option log/activation.
+        # Log messages during activation.
+        # Don't use this in low memory situations (can deadlock).
+        activation = 0
+
+        # Configuration option log/debug_classes.
+        # Select log messages by class.
+        # Some debugging messages are assigned to a class and only appear in
+        # debug output if the class is listed here. Classes currently
+        # available: memory, devices, activation, allocation, lvmetad,
+        # metadata, cache, locking, lvmpolld. Use "all" to see everything.
+        debug_classes = [ "memory", "devices", "activation", "allocation", "lvmetad", "metadata", "cache", "locking", "lvmpolld" ]
 }
 
 # Configuration section backup.
@@ -535,957 +539,957 @@
 # stored in a human readable text format.
 backup {
 
-	# Configuration option backup/backup.
-	# Maintain a backup of the current metadata configuration.
-	# Think very hard before turning this off!
-	backup = 1
-
-	# Configuration option backup/backup_dir.
-	# Location of the metadata backup files.
-	# Remember to back up this directory regularly!
-	backup_dir = "/etc/lvm/backup"
-
-	# Configuration option backup/archive.
-	# Maintain an archive of old metadata configurations.
-	# Think very hard before turning this off.
-	archive = 1
-
-	# Configuration option backup/archive_dir.
-	# Location of the metdata archive files.
-	# Remember to back up this directory regularly!
-	archive_dir = "/etc/lvm/archive"
-
-	# Configuration option backup/retain_min.
-	# Minimum number of archives to keep.
-	retain_min = 10
-
-	# Configuration option backup/retain_days.
-	# Minimum number of days to keep archive files.
-	retain_days = 30
+        # Configuration option backup/backup.
+        # Maintain a backup of the current metadata configuration.
+        # Think very hard before turning this off!
+        backup = 1
+
+        # Configuration option backup/backup_dir.
+        # Location of the metadata backup files.
+        # Remember to back up this directory regularly!
+        backup_dir = "/etc/lvm/backup"
+
+        # Configuration option backup/archive.
+        # Maintain an archive of old metadata configurations.
+        # Think very hard before turning this off.
+        archive = 1
+
+        # Configuration option backup/archive_dir.
+        # Location of the metdata archive files.
+        # Remember to back up this directory regularly!
+        archive_dir = "/etc/lvm/archive"
+
+        # Configuration option backup/retain_min.
+        # Minimum number of archives to keep.
+        retain_min = 10
+
+        # Configuration option backup/retain_days.
+        # Minimum number of days to keep archive files.
+        retain_days = 30
 }
 
 # Configuration section shell.
 # Settings for running LVM in shell (readline) mode.
 shell {
 
-	# Configuration option shell/history_size.
-	# Number of lines of history to store in ~/.lvm_history.
-	history_size = 100
+        # Configuration option shell/history_size.
+        # Number of lines of history to store in ~/.lvm_history.
+        history_size = 100
 }
 
 # Configuration section global.
 # Miscellaneous global LVM settings.
 global {
 
-	# Configuration option global/umask.
-	# The file creation mask for any files and directories created.
-	# Interpreted as octal if the first digit is zero.
-	umask = 077
-
-	# Configuration option global/test.
-	# No on-disk metadata changes will be made in test mode.
-	# Equivalent to having the -t option on every command.
-	test = 0
-
-	# Configuration option global/units.
-	# Default value for --units argument.
-	units = "h"
-
-	# Configuration option global/si_unit_consistency.
-	# Distinguish between powers of 1024 and 1000 bytes.
-	# The LVM commands distinguish between powers of 1024 bytes,
-	# e.g. KiB, MiB, GiB, and powers of 1000 bytes, e.g. KB, MB, GB.
-	# If scripts depend on the old behaviour, disable this setting
-	# temporarily until they are updated.
-	si_unit_consistency = 1
-
-	# Configuration option global/suffix.
-	# Display unit suffix for sizes.
-	# This setting has no effect if the units are in human-readable form
-	# (global/units = "h") in which case the suffix is always displayed.
-	suffix = 1
-
-	# Configuration option global/activation.
-	# Enable/disable communication with the kernel device-mapper.
-	# Disable to use the tools to manipulate LVM metadata without
-	# activating any logical volumes. If the device-mapper driver
-	# is not present in the kernel, disabling this should suppress
-	# the error messages.
-	activation = 1
-
-	# Configuration option global/fallback_to_lvm1.
-	# Try running LVM1 tools if LVM cannot communicate with DM.
-	# This option only applies to 2.4 kernels and is provided to help
-	# switch between device-mapper kernels and LVM1 kernels. The LVM1
-	# tools need to be installed with .lvm1 suffices, e.g. vgscan.lvm1.
-	# They will stop working once the lvm2 on-disk metadata format is used.
-	# This configuration option has an automatic default value.
-	# fallback_to_lvm1 = 0
-
-	# Configuration option global/format.
-	# The default metadata format that commands should use.
-	# The -M 1|2 option overrides this setting.
-	# 
-	# Accepted values:
-	#   lvm1
-	#   lvm2
-	# 
-	# This configuration option has an automatic default value.
-	# format = "lvm2"
-
-	# Configuration option global/format_libraries.
-	# Shared libraries that process different metadata formats.
-	# If support for LVM1 metadata was compiled as a shared library use
-	# format_libraries = "liblvm2format1.so"
-	# This configuration option does not have a default value defined.
-
-	# Configuration option global/segment_libraries.
-	# This configuration option does not have a default value defined.
-
-	# Configuration option global/proc.
-	# Location of proc filesystem.
-	# This configuration option is advanced.
-	proc = "/proc"
-
-	# Configuration option global/etc.
-	# Location of /etc system configuration directory.
-	etc = "/etc"
-
-	# Configuration option global/locking_type.
-	# Type of locking to use.
-	# 
-	# Accepted values:
-	#   0
-	#     Turns off locking. Warning: this risks metadata corruption if
-	#     commands run concurrently.
-	#   1
-	#     LVM uses local file-based locking, the standard mode.
-	#   2
-	#     LVM uses the external shared library locking_library.
-	#   3
-	#     LVM uses built-in clustered locking with clvmd.
-	#     This is incompatible with lvmetad. If use_lvmetad is enabled,
-	#     LVM prints a warning and disables lvmetad use.
-	#   4
-	#     LVM uses read-only locking which forbids any operations that
-	#     might change metadata.
-	#   5
-	#     Offers dummy locking for tools that do not need any locks.
-	#     You should not need to set this directly; the tools will select
-	#     when to use it instead of the configured locking_type.
-	#     Do not use lvmetad or the kernel device-mapper driver with this
-	#     locking type. It is used by the --readonly option that offers
-	#     read-only access to Volume Group metadata that cannot be locked
-	#     safely because it belongs to an inaccessible domain and might be
-	#     in use, for example a virtual machine image or a disk that is
-	#     shared by a clustered machine.
-	# 
-	locking_type = 1
-
-	# Configuration option global/wait_for_locks.
-	# When disabled, fail if a lock request would block.
-	wait_for_locks = 1
-
-	# Configuration option global/fallback_to_clustered_locking.
-	# Attempt to use built-in cluster locking if locking_type 2 fails.
-	# If using external locking (type 2) and initialisation fails, with
-	# this enabled, an attempt will be made to use the built-in clustered
-	# locking. Disable this if using a customised locking_library.
-	fallback_to_clustered_locking = 1
-
-	# Configuration option global/fallback_to_local_locking.
-	# Use locking_type 1 (local) if locking_type 2 or 3 fail.
-	# If an attempt to initialise type 2 or type 3 locking failed, perhaps
-	# because cluster components such as clvmd are not running, with this
-	# enabled, an attempt will be made to use local file-based locking
-	# (type 1). If this succeeds, only commands against local VGs will
-	# proceed. VGs marked as clustered will be ignored.
-	fallback_to_local_locking = 1
-
-	# Configuration option global/locking_dir.
-	# Directory to use for LVM command file locks.
-	# Local non-LV directory that holds file-based locks while commands are
-	# in progress. A directory like /tmp that may get wiped on reboot is OK.
-	locking_dir = "/run/lock/lvm"
-
-	# Configuration option global/prioritise_write_locks.
-	# Allow quicker VG write access during high volume read access.
-	# When there are competing read-only and read-write access requests for
-	# a volume group's metadata, instead of always granting the read-only
-	# requests immediately, delay them to allow the read-write requests to
-	# be serviced. Without this setting, write access may be stalled by a
-	# high volume of read-only requests. This option only affects
-	# locking_type 1 viz. local file-based locking.
-	prioritise_write_locks = 1
-
-	# Configuration option global/library_dir.
-	# Search this directory first for shared libraries.
-	# This configuration option does not have a default value defined.
-
-	# Configuration option global/locking_library.
-	# The external locking library to use for locking_type 2.
-	# This configuration option has an automatic default value.
-	# locking_library = "liblvm2clusterlock.so"
-
-	# Configuration option global/abort_on_internal_errors.
-	# Abort a command that encounters an internal error.
-	# Treat any internal errors as fatal errors, aborting the process that
-	# encountered the internal error. Please only enable for debugging.
-	abort_on_internal_errors = 0
-
-	# Configuration option global/detect_internal_vg_cache_corruption.
-	# Internal verification of VG structures.
-	# Check if CRC matches when a parsed VG is used multiple times. This
-	# is useful to catch unexpected changes to cached VG structures.
-	# Please only enable for debugging.
-	detect_internal_vg_cache_corruption = 0
-
-	# Configuration option global/metadata_read_only.
-	# No operations that change on-disk metadata are permitted.
-	# Additionally, read-only commands that encounter metadata in need of
-	# repair will still be allowed to proceed exactly as if the repair had
-	# been performed (except for the unchanged vg_seqno). Inappropriate
-	# use could mess up your system, so seek advice first!
-	metadata_read_only = 0
-
-	# Configuration option global/mirror_segtype_default.
-	# The segment type used by the short mirroring option -m.
-	# The --type mirror|raid1 option overrides this setting.
-	# 
-	# Accepted values:
-	#   mirror
-	#     The original RAID1 implementation from LVM/DM. It is
-	#     characterized by a flexible log solution (core, disk, mirrored),
-	#     and by the necessity to block I/O while handling a failure.
-	#     There is an inherent race in the dmeventd failure handling logic
-	#     with snapshots of devices using this type of RAID1 that in the
-	#     worst case could cause a deadlock. (Also see
-	#     devices/ignore_lvm_mirrors.)
-	#   raid1
-	#     This is a newer RAID1 implementation using the MD RAID1
-	#     personality through device-mapper. It is characterized by a
-	#     lack of log options. (A log is always allocated for every
-	#     device and they are placed on the same device as the image,
-	#     so no separate devices are required.) This mirror
-	#     implementation does not require I/O to be blocked while
-	#     handling a failure. This mirror implementation is not
-	#     cluster-aware and cannot be used in a shared (active/active)
-	#     fashion in a cluster.
-	# 
-	mirror_segtype_default = "raid1"
-
-	# Configuration option global/raid10_segtype_default.
-	# The segment type used by the -i -m combination.
-	# The --type raid10|mirror option overrides this setting.
-	# The --stripes/-i and --mirrors/-m options can both be specified
-	# during the creation of a logical volume to use both striping and
-	# mirroring for the LV. There are two different implementations.
-	# 
-	# Accepted values:
-	#   raid10
-	#     LVM uses MD's RAID10 personality through DM. This is the
-	#     preferred option.
-	#   mirror
-	#     LVM layers the 'mirror' and 'stripe' segment types. The layering
-	#     is done by creating a mirror LV on top of striped sub-LVs,
-	#     effectively creating a RAID 0+1 array. The layering is suboptimal
-	#     in terms of providing redundancy and performance.
-	# 
-	raid10_segtype_default = "raid10"
-
-	# Configuration option global/sparse_segtype_default.
-	# The segment type used by the -V -L combination.
-	# The --type snapshot|thin option overrides this setting.
-	# The combination of -V and -L options creates a sparse LV. There are
-	# two different implementations.
-	# 
-	# Accepted values:
-	#   snapshot
-	#     The original snapshot implementation from LVM/DM. It uses an old
-	#     snapshot that mixes data and metadata within a single COW
-	#     storage volume and performs poorly when the size of stored data
-	#     passes hundreds of MB.
-	#   thin
-	#     A newer implementation that uses thin provisioning. It has a
-	#     bigger minimal chunk size (64KiB) and uses a separate volume for
-	#     metadata. It has better performance, especially when more data
-	#     is used. It also supports full snapshots.
-	# 
-	sparse_segtype_default = "thin"
-
-	# Configuration option global/lvdisplay_shows_full_device_path.
-	# Enable this to reinstate the previous lvdisplay name format.
-	# The default format for displaying LV names in lvdisplay was changed
-	# in version 2.02.89 to show the LV name and path separately.
-	# Previously this was always shown as /dev/vgname/lvname even when that
-	# was never a valid path in the /dev filesystem.
-	# This configuration option has an automatic default value.
-	# lvdisplay_shows_full_device_path = 0
-
-	# Configuration option global/use_lvmetad.
-	# Use lvmetad to cache metadata and reduce disk scanning.
-	# When enabled (and running), lvmetad provides LVM commands with VG
-	# metadata and PV state. LVM commands then avoid reading this
-	# information from disks which can be slow. When disabled (or not
-	# running), LVM commands fall back to scanning disks to obtain VG
-	# metadata. lvmetad is kept updated via udev rules which must be set
-	# up for LVM to work correctly. (The udev rules should be installed
-	# by default.) Without a proper udev setup, changes in the system's
-	# block device configuration will be unknown to LVM, and ignored
-	# until a manual 'pvscan --cache' is run. If lvmetad was running
-	# while use_lvmetad was disabled, it must be stopped, use_lvmetad
-	# enabled, and then started. When using lvmetad, LV activation is
-	# switched to an automatic, event-based mode. In this mode, LVs are
-	# activated based on incoming udev events that inform lvmetad when
-	# PVs appear on the system. When a VG is complete (all PVs present),
-	# it is auto-activated. The auto_activation_volume_list setting
-	# controls which LVs are auto-activated (all by default.)
-	# When lvmetad is updated (automatically by udev events, or directly
-	# by pvscan --cache), devices/filter is ignored and all devices are
-	# scanned by default. lvmetad always keeps unfiltered information
-	# which is provided to LVM commands. Each LVM command then filters
-	# based on devices/filter. This does not apply to other, non-regexp,
-	# filtering settings: component filters such as multipath and MD
-	# are checked during pvscan --cache. To filter a device and prevent
-	# scanning from the LVM system entirely, including lvmetad, use
-	# devices/global_filter.
-	use_lvmetad = 1
-
-	# Configuration option global/use_lvmlockd.
-	# Use lvmlockd for locking among hosts using LVM on shared storage.
-	# See lvmlockd(8) for more information.
-	use_lvmlockd = 0
-
-	# Configuration option global/lvmlockd_lock_retries.
-	# Retry lvmlockd lock requests this many times.
-	# This configuration option has an automatic default value.
-	# lvmlockd_lock_retries = 3
-
-	# Configuration option global/sanlock_lv_extend.
-	# Size in MiB to extend the internal LV holding sanlock locks.
-	# The internal LV holds locks for each LV in the VG, and after enough
-	# LVs have been created, the internal LV needs to be extended. lvcreate
-	# will automatically extend the internal LV when needed by the amount
-	# specified here. Setting this to 0 disables the automatic extension
-	# and can cause lvcreate to fail.
-	# This configuration option has an automatic default value.
-	# sanlock_lv_extend = 256
-
-	# Configuration option global/thin_check_executable.
-	# The full path to the thin_check command.
-	# LVM uses this command to check that a thin metadata device is in a
-	# usable state. When a thin pool is activated and after it is
-	# deactivated, this command is run. Activation will only proceed if
-	# the command has an exit status of 0. Set to "" to skip this check.
-	# (Not recommended.) Also see thin_check_options.
-	# (See package device-mapper-persistent-data or thin-provisioning-tools)
-	# This configuration option has an automatic default value.
-	# thin_check_executable = "/usr/sbin/thin_check"
-
-	# Configuration option global/thin_dump_executable.
-	# The full path to the thin_dump command.
-	# LVM uses this command to dump thin pool metadata.
-	# (See package device-mapper-persistent-data or thin-provisioning-tools)
-	# This configuration option has an automatic default value.
-	# thin_dump_executable = "/usr/sbin/thin_dump"
-
-	# Configuration option global/thin_repair_executable.
-	# The full path to the thin_repair command.
-	# LVM uses this command to repair a thin metadata device if it is in
-	# an unusable state. Also see thin_repair_options.
-	# (See package device-mapper-persistent-data or thin-provisioning-tools)
-	# This configuration option has an automatic default value.
-	# thin_repair_executable = "/usr/sbin/thin_repair"
-
-	# Configuration option global/thin_check_options.
-	# List of options passed to the thin_check command.
-	# With thin_check version 2.1 or newer you can add the option
-	# --ignore-non-fatal-errors to let it pass through ignorable errors
-	# and fix them later. With thin_check version 3.2 or newer you should
-	# include the option --clear-needs-check-flag.
-	# This configuration option has an automatic default value.
-	# thin_check_options = [ "-q", "--clear-needs-check-flag" ]
-
-	# Configuration option global/thin_repair_options.
-	# List of options passed to the thin_repair command.
-	# This configuration option has an automatic default value.
-	# thin_repair_options = [ "" ]
-
-	# Configuration option global/thin_disabled_features.
-	# Features to not use in the thin driver.
-	# This can be helpful for testing, or to avoid using a feature that is
-	# causing problems. Features include: block_size, discards,
-	# discards_non_power_2, external_origin, metadata_resize,
-	# external_origin_extend, error_if_no_space.
-	# 
-	# Example
-	# thin_disabled_features = [ "discards", "block_size" ]
-	# 
-	# This configuration option does not have a default value defined.
-
-	# Configuration option global/cache_disabled_features.
-	# Features to not use in the cache driver.
-	# This can be helpful for testing, or to avoid using a feature that is
-	# causing problems. Features include: policy_mq, policy_smq.
-	# 
-	# Example
-	# cache_disabled_features = [ "policy_smq" ]
-	# 
-	# This configuration option does not have a default value defined.
-
-	# Configuration option global/cache_check_executable.
-	# The full path to the cache_check command.
-	# LVM uses this command to check that a cache metadata device is in a
-	# usable state. When a cached LV is activated and after it is
-	# deactivated, this command is run. Activation will only proceed if the
-	# command has an exit status of 0. Set to "" to skip this check.
-	# (Not recommended.) Also see cache_check_options.
-	# (See package device-mapper-persistent-data or thin-provisioning-tools)
-	# This configuration option has an automatic default value.
-	# cache_check_executable = "/usr/sbin/cache_check"
-
-	# Configuration option global/cache_dump_executable.
-	# The full path to the cache_dump command.
-	# LVM uses this command to dump cache pool metadata.
-	# (See package device-mapper-persistent-data or thin-provisioning-tools)
-	# This configuration option has an automatic default value.
-	# cache_dump_executable = "/usr/sbin/cache_dump"
-
-	# Configuration option global/cache_repair_executable.
-	# The full path to the cache_repair command.
-	# LVM uses this command to repair a cache metadata device if it is in
-	# an unusable state. Also see cache_repair_options.
-	# (See package device-mapper-persistent-data or thin-provisioning-tools)
-	# This configuration option has an automatic default value.
-	# cache_repair_executable = "/usr/sbin/cache_repair"
-
-	# Configuration option global/cache_check_options.
-	# List of options passed to the cache_check command.
-	# With cache_check version 5.0 or newer you should include the option
-	# --clear-needs-check-flag.
-	# This configuration option has an automatic default value.
-	# cache_check_options = [ "-q", "--clear-needs-check-flag" ]
-
-	# Configuration option global/cache_repair_options.
-	# List of options passed to the cache_repair command.
-	# This configuration option has an automatic default value.
-	# cache_repair_options = [ "" ]
-
-	# Configuration option global/system_id_source.
-	# The method LVM uses to set the local system ID.
-	# Volume Groups can also be given a system ID (by vgcreate, vgchange,
-	# or vgimport.) A VG on shared storage devices is accessible only to
-	# the host with a matching system ID. See 'man lvmsystemid' for
-	# information on limitations and correct usage.
-	# 
-	# Accepted values:
-	#   none
-	#     The host has no system ID.
-	#   lvmlocal
-	#     Obtain the system ID from the system_id setting in the 'local'
-	#     section of an lvm configuration file, e.g. lvmlocal.conf.
-	#   uname
-	#     Set the system ID from the hostname (uname) of the system.
-	#     System IDs beginning localhost are not permitted.
-	#   machineid
-	#     Use the contents of the machine-id file to set the system ID.
-	#     Some systems create this file at installation time.
-	#     See 'man machine-id' and global/etc.
-	#   file
-	#     Use the contents of another file (system_id_file) to set the
-	#     system ID.
-	# 
-	system_id_source = "none"
-
-	# Configuration option global/system_id_file.
-	# The full path to the file containing a system ID.
-	# This is used when system_id_source is set to 'file'.
-	# Comments starting with the character # are ignored.
-	# This configuration option does not have a default value defined.
-
-	# Configuration option global/use_lvmpolld.
-	# Use lvmpolld to supervise long running LVM commands.
-	# When enabled, control of long running LVM commands is transferred
-	# from the original LVM command to the lvmpolld daemon. This allows
-	# the operation to continue independent of the original LVM command.
-	# After lvmpolld takes over, the LVM command displays the progress
-	# of the ongoing operation. lvmpolld itself runs LVM commands to
-	# manage the progress of ongoing operations. lvmpolld can be used as
-	# a native systemd service, which allows it to be started on demand,
-	# and to use its own control group. When this option is disabled, LVM
-	# commands will supervise long running operations by forking themselves.
-	use_lvmpolld = 1
+        # Configuration option global/umask.
+        # The file creation mask for any files and directories created.
+        # Interpreted as octal if the first digit is zero.
+        umask = 077
+
+        # Configuration option global/test.
+        # No on-disk metadata changes will be made in test mode.
+        # Equivalent to having the -t option on every command.
+        test = 0
+
+        # Configuration option global/units.
+        # Default value for --units argument.
+        units = "h"
+
+        # Configuration option global/si_unit_consistency.
+        # Distinguish between powers of 1024 and 1000 bytes.
+        # The LVM commands distinguish between powers of 1024 bytes,
+        # e.g. KiB, MiB, GiB, and powers of 1000 bytes, e.g. KB, MB, GB.
+        # If scripts depend on the old behaviour, disable this setting
+        # temporarily until they are updated.
+        si_unit_consistency = 1
+
+        # Configuration option global/suffix.
+        # Display unit suffix for sizes.
+        # This setting has no effect if the units are in human-readable form
+        # (global/units = "h") in which case the suffix is always displayed.
+        suffix = 1
+
+        # Configuration option global/activation.
+        # Enable/disable communication with the kernel device-mapper.
+        # Disable to use the tools to manipulate LVM metadata without
+        # activating any logical volumes. If the device-mapper driver
+        # is not present in the kernel, disabling this should suppress
+        # the error messages.
+        activation = 1
+
+        # Configuration option global/fallback_to_lvm1.
+        # Try running LVM1 tools if LVM cannot communicate with DM.
+        # This option only applies to 2.4 kernels and is provided to help
+        # switch between device-mapper kernels and LVM1 kernels. The LVM1
+        # tools need to be installed with .lvm1 suffices, e.g. vgscan.lvm1.
+        # They will stop working once the lvm2 on-disk metadata format is used.
+        # This configuration option has an automatic default value.
+        # fallback_to_lvm1 = 0
+
+        # Configuration option global/format.
+        # The default metadata format that commands should use.
+        # The -M 1|2 option overrides this setting.
+        # 
+        # Accepted values:
+        #   lvm1
+        #   lvm2
+        # 
+        # This configuration option has an automatic default value.
+        # format = "lvm2"
+
+        # Configuration option global/format_libraries.
+        # Shared libraries that process different metadata formats.
+        # If support for LVM1 metadata was compiled as a shared library use
+        # format_libraries = "liblvm2format1.so"
+        # This configuration option does not have a default value defined.
+
+        # Configuration option global/segment_libraries.
+        # This configuration option does not have a default value defined.
+
+        # Configuration option global/proc.
+        # Location of proc filesystem.
+        # This configuration option is advanced.
+        proc = "/proc"
+
+        # Configuration option global/etc.
+        # Location of /etc system configuration directory.
+        etc = "/etc"
+
+        # Configuration option global/locking_type.
+        # Type of locking to use.
+        # 
+        # Accepted values:
+        #   0
+        #     Turns off locking. Warning: this risks metadata corruption if
+        #     commands run concurrently.
+        #   1
+        #     LVM uses local file-based locking, the standard mode.
+        #   2
+        #     LVM uses the external shared library locking_library.
+        #   3
+        #     LVM uses built-in clustered locking with clvmd.
+        #     This is incompatible with lvmetad. If use_lvmetad is enabled,
+        #     LVM prints a warning and disables lvmetad use.
+        #   4
+        #     LVM uses read-only locking which forbids any operations that
+        #     might change metadata.
+        #   5
+        #     Offers dummy locking for tools that do not need any locks.
+        #     You should not need to set this directly; the tools will select
+        #     when to use it instead of the configured locking_type.
+        #     Do not use lvmetad or the kernel device-mapper driver with this
+        #     locking type. It is used by the --readonly option that offers
+        #     read-only access to Volume Group metadata that cannot be locked
+        #     safely because it belongs to an inaccessible domain and might be
+        #     in use, for example a virtual machine image or a disk that is
+        #     shared by a clustered machine.
+        # 
+        locking_type = 1
+
+        # Configuration option global/wait_for_locks.
+        # When disabled, fail if a lock request would block.
+        wait_for_locks = 1
+
+        # Configuration option global/fallback_to_clustered_locking.
+        # Attempt to use built-in cluster locking if locking_type 2 fails.
+        # If using external locking (type 2) and initialisation fails, with
+        # this enabled, an attempt will be made to use the built-in clustered
+        # locking. Disable this if using a customised locking_library.
+        fallback_to_clustered_locking = 1
+
+        # Configuration option global/fallback_to_local_locking.
+        # Use locking_type 1 (local) if locking_type 2 or 3 fail.
+        # If an attempt to initialise type 2 or type 3 locking failed, perhaps
+        # because cluster components such as clvmd are not running, with this
+        # enabled, an attempt will be made to use local file-based locking
+        # (type 1). If this succeeds, only commands against local VGs will
+        # proceed. VGs marked as clustered will be ignored.
+        fallback_to_local_locking = 1
+
+        # Configuration option global/locking_dir.
+        # Directory to use for LVM command file locks.
+        # Local non-LV directory that holds file-based locks while commands are
+        # in progress. A directory like /tmp that may get wiped on reboot is OK.
+        locking_dir = "/run/lock/lvm"
+
+        # Configuration option global/prioritise_write_locks.
+        # Allow quicker VG write access during high volume read access.
+        # When there are competing read-only and read-write access requests for
+        # a volume group's metadata, instead of always granting the read-only
+        # requests immediately, delay them to allow the read-write requests to
+        # be serviced. Without this setting, write access may be stalled by a
+        # high volume of read-only requests. This option only affects
+        # locking_type 1 viz. local file-based locking.
+        prioritise_write_locks = 1
+
+        # Configuration option global/library_dir.
+        # Search this directory first for shared libraries.
+        # This configuration option does not have a default value defined.
+
+        # Configuration option global/locking_library.
+        # The external locking library to use for locking_type 2.
+        # This configuration option has an automatic default value.
+        # locking_library = "liblvm2clusterlock.so"
+
+        # Configuration option global/abort_on_internal_errors.
+        # Abort a command that encounters an internal error.
+        # Treat any internal errors as fatal errors, aborting the process that
+        # encountered the internal error. Please only enable for debugging.
+        abort_on_internal_errors = 0
+
+        # Configuration option global/detect_internal_vg_cache_corruption.
+        # Internal verification of VG structures.
+        # Check if CRC matches when a parsed VG is used multiple times. This
+        # is useful to catch unexpected changes to cached VG structures.
+        # Please only enable for debugging.
+        detect_internal_vg_cache_corruption = 0
+
+        # Configuration option global/metadata_read_only.
+        # No operations that change on-disk metadata are permitted.
+        # Additionally, read-only commands that encounter metadata in need of
+        # repair will still be allowed to proceed exactly as if the repair had
+        # been performed (except for the unchanged vg_seqno). Inappropriate
+        # use could mess up your system, so seek advice first!
+        metadata_read_only = 0
+
+        # Configuration option global/mirror_segtype_default.
+        # The segment type used by the short mirroring option -m.
+        # The --type mirror|raid1 option overrides this setting.
+        # 
+        # Accepted values:
+        #   mirror
+        #     The original RAID1 implementation from LVM/DM. It is
+        #     characterized by a flexible log solution (core, disk, mirrored),
+        #     and by the necessity to block I/O while handling a failure.
+        #     There is an inherent race in the dmeventd failure handling logic
+        #     with snapshots of devices using this type of RAID1 that in the
+        #     worst case could cause a deadlock. (Also see
+        #     devices/ignore_lvm_mirrors.)
+        #   raid1
+        #     This is a newer RAID1 implementation using the MD RAID1
+        #     personality through device-mapper. It is characterized by a
+        #     lack of log options. (A log is always allocated for every
+        #     device and they are placed on the same device as the image,
+        #     so no separate devices are required.) This mirror
+        #     implementation does not require I/O to be blocked while
+        #     handling a failure. This mirror implementation is not
+        #     cluster-aware and cannot be used in a shared (active/active)
+        #     fashion in a cluster.
+        # 
+        mirror_segtype_default = "raid1"
+
+        # Configuration option global/raid10_segtype_default.
+        # The segment type used by the -i -m combination.
+        # The --type raid10|mirror option overrides this setting.
+        # The --stripes/-i and --mirrors/-m options can both be specified
+        # during the creation of a logical volume to use both striping and
+        # mirroring for the LV. There are two different implementations.
+        # 
+        # Accepted values:
+        #   raid10
+        #     LVM uses MD's RAID10 personality through DM. This is the
+        #     preferred option.
+        #   mirror
+        #     LVM layers the 'mirror' and 'stripe' segment types. The layering
+        #     is done by creating a mirror LV on top of striped sub-LVs,
+        #     effectively creating a RAID 0+1 array. The layering is suboptimal
+        #     in terms of providing redundancy and performance.
+        # 
+        raid10_segtype_default = "raid10"
+
+        # Configuration option global/sparse_segtype_default.
+        # The segment type used by the -V -L combination.
+        # The --type snapshot|thin option overrides this setting.
+        # The combination of -V and -L options creates a sparse LV. There are
+        # two different implementations.
+        # 
+        # Accepted values:
+        #   snapshot
+        #     The original snapshot implementation from LVM/DM. It uses an old
+        #     snapshot that mixes data and metadata within a single COW
+        #     storage volume and performs poorly when the size of stored data
+        #     passes hundreds of MB.
+        #   thin
+        #     A newer implementation that uses thin provisioning. It has a
+        #     bigger minimal chunk size (64KiB) and uses a separate volume for
+        #     metadata. It has better performance, especially when more data
+        #     is used. It also supports full snapshots.
+        # 
+        sparse_segtype_default = "thin"
+
+        # Configuration option global/lvdisplay_shows_full_device_path.
+        # Enable this to reinstate the previous lvdisplay name format.
+        # The default format for displaying LV names in lvdisplay was changed
+        # in version 2.02.89 to show the LV name and path separately.
+        # Previously this was always shown as /dev/vgname/lvname even when that
+        # was never a valid path in the /dev filesystem.
+        # This configuration option has an automatic default value.
+        # lvdisplay_shows_full_device_path = 0
+
+        # Configuration option global/use_lvmetad.
+        # Use lvmetad to cache metadata and reduce disk scanning.
+        # When enabled (and running), lvmetad provides LVM commands with VG
+        # metadata and PV state. LVM commands then avoid reading this
+        # information from disks which can be slow. When disabled (or not
+        # running), LVM commands fall back to scanning disks to obtain VG
+        # metadata. lvmetad is kept updated via udev rules which must be set
+        # up for LVM to work correctly. (The udev rules should be installed
+        # by default.) Without a proper udev setup, changes in the system's
+        # block device configuration will be unknown to LVM, and ignored
+        # until a manual 'pvscan --cache' is run. If lvmetad was running
+        # while use_lvmetad was disabled, it must be stopped, use_lvmetad
+        # enabled, and then started. When using lvmetad, LV activation is
+        # switched to an automatic, event-based mode. In this mode, LVs are
+        # activated based on incoming udev events that inform lvmetad when
+        # PVs appear on the system. When a VG is complete (all PVs present),
+        # it is auto-activated. The auto_activation_volume_list setting
+        # controls which LVs are auto-activated (all by default.)
+        # When lvmetad is updated (automatically by udev events, or directly
+        # by pvscan --cache), devices/filter is ignored and all devices are
+        # scanned by default. lvmetad always keeps unfiltered information
+        # which is provided to LVM commands. Each LVM command then filters
+        # based on devices/filter. This does not apply to other, non-regexp,
+        # filtering settings: component filters such as multipath and MD
+        # are checked during pvscan --cache. To filter a device and prevent
+        # scanning from the LVM system entirely, including lvmetad, use
+        # devices/global_filter.
+        use_lvmetad = 1
+
+        # Configuration option global/use_lvmlockd.
+        # Use lvmlockd for locking among hosts using LVM on shared storage.
+        # See lvmlockd(8) for more information.
+        use_lvmlockd = 0
+
+        # Configuration option global/lvmlockd_lock_retries.
+        # Retry lvmlockd lock requests this many times.
+        # This configuration option has an automatic default value.
+        # lvmlockd_lock_retries = 3
+
+        # Configuration option global/sanlock_lv_extend.
+        # Size in MiB to extend the internal LV holding sanlock locks.
+        # The internal LV holds locks for each LV in the VG, and after enough
+        # LVs have been created, the internal LV needs to be extended. lvcreate
+        # will automatically extend the internal LV when needed by the amount
+        # specified here. Setting this to 0 disables the automatic extension
+        # and can cause lvcreate to fail.
+        # This configuration option has an automatic default value.
+        # sanlock_lv_extend = 256
+
+        # Configuration option global/thin_check_executable.
+        # The full path to the thin_check command.
+        # LVM uses this command to check that a thin metadata device is in a
+        # usable state. When a thin pool is activated and after it is
+        # deactivated, this command is run. Activation will only proceed if
+        # the command has an exit status of 0. Set to "" to skip this check.
+        # (Not recommended.) Also see thin_check_options.
+        # (See package device-mapper-persistent-data or thin-provisioning-tools)
+        # This configuration option has an automatic default value.
+        # thin_check_executable = "/usr/sbin/thin_check"
+
+        # Configuration option global/thin_dump_executable.
+        # The full path to the thin_dump command.
+        # LVM uses this command to dump thin pool metadata.
+        # (See package device-mapper-persistent-data or thin-provisioning-tools)
+        # This configuration option has an automatic default value.
+        # thin_dump_executable = "/usr/sbin/thin_dump"
+
+        # Configuration option global/thin_repair_executable.
+        # The full path to the thin_repair command.
+        # LVM uses this command to repair a thin metadata device if it is in
+        # an unusable state. Also see thin_repair_options.
+        # (See package device-mapper-persistent-data or thin-provisioning-tools)
+        # This configuration option has an automatic default value.
+        # thin_repair_executable = "/usr/sbin/thin_repair"
+
+        # Configuration option global/thin_check_options.
+        # List of options passed to the thin_check command.
+        # With thin_check version 2.1 or newer you can add the option
+        # --ignore-non-fatal-errors to let it pass through ignorable errors
+        # and fix them later. With thin_check version 3.2 or newer you should
+        # include the option --clear-needs-check-flag.
+        # This configuration option has an automatic default value.
+        # thin_check_options = [ "-q", "--clear-needs-check-flag" ]
+
+        # Configuration option global/thin_repair_options.
+        # List of options passed to the thin_repair command.
+        # This configuration option has an automatic default value.
+        # thin_repair_options = [ "" ]
+
+        # Configuration option global/thin_disabled_features.
+        # Features to not use in the thin driver.
+        # This can be helpful for testing, or to avoid using a feature that is
+        # causing problems. Features include: block_size, discards,
+        # discards_non_power_2, external_origin, metadata_resize,
+        # external_origin_extend, error_if_no_space.
+        # 
+        # Example
+        # thin_disabled_features = [ "discards", "block_size" ]
+        # 
+        # This configuration option does not have a default value defined.
+
+        # Configuration option global/cache_disabled_features.
+        # Features to not use in the cache driver.
+        # This can be helpful for testing, or to avoid using a feature that is
+        # causing problems. Features include: policy_mq, policy_smq.
+        # 
+        # Example
+        # cache_disabled_features = [ "policy_smq" ]
+        # 
+        # This configuration option does not have a default value defined.
+
+        # Configuration option global/cache_check_executable.
+        # The full path to the cache_check command.
+        # LVM uses this command to check that a cache metadata device is in a
+        # usable state. When a cached LV is activated and after it is
+        # deactivated, this command is run. Activation will only proceed if the
+        # command has an exit status of 0. Set to "" to skip this check.
+        # (Not recommended.) Also see cache_check_options.
+        # (See package device-mapper-persistent-data or thin-provisioning-tools)
+        # This configuration option has an automatic default value.
+        # cache_check_executable = "/usr/sbin/cache_check"
+
+        # Configuration option global/cache_dump_executable.
+        # The full path to the cache_dump command.
+        # LVM uses this command to dump cache pool metadata.
+        # (See package device-mapper-persistent-data or thin-provisioning-tools)
+        # This configuration option has an automatic default value.
+        # cache_dump_executable = "/usr/sbin/cache_dump"
+
+        # Configuration option global/cache_repair_executable.
+        # The full path to the cache_repair command.
+        # LVM uses this command to repair a cache metadata device if it is in
+        # an unusable state. Also see cache_repair_options.
+        # (See package device-mapper-persistent-data or thin-provisioning-tools)
+        # This configuration option has an automatic default value.
+        # cache_repair_executable = "/usr/sbin/cache_repair"
+
+        # Configuration option global/cache_check_options.
+        # List of options passed to the cache_check command.
+        # With cache_check version 5.0 or newer you should include the option
+        # --clear-needs-check-flag.
+        # This configuration option has an automatic default value.
+        # cache_check_options = [ "-q", "--clear-needs-check-flag" ]
+
+        # Configuration option global/cache_repair_options.
+        # List of options passed to the cache_repair command.
+        # This configuration option has an automatic default value.
+        # cache_repair_options = [ "" ]
+
+        # Configuration option global/system_id_source.
+        # The method LVM uses to set the local system ID.
+        # Volume Groups can also be given a system ID (by vgcreate, vgchange,
+        # or vgimport.) A VG on shared storage devices is accessible only to
+        # the host with a matching system ID. See 'man lvmsystemid' for
+        # information on limitations and correct usage.
+        # 
+        # Accepted values:
+        #   none
+        #     The host has no system ID.
+        #   lvmlocal
+        #     Obtain the system ID from the system_id setting in the 'local'
+        #     section of an lvm configuration file, e.g. lvmlocal.conf.
+        #   uname
+        #     Set the system ID from the hostname (uname) of the system.
+        #     System IDs beginning localhost are not permitted.
+        #   machineid
+        #     Use the contents of the machine-id file to set the system ID.
+        #     Some systems create this file at installation time.
+        #     See 'man machine-id' and global/etc.
+        #   file
+        #     Use the contents of another file (system_id_file) to set the
+        #     system ID.
+        # 
+        system_id_source = "none"
+
+        # Configuration option global/system_id_file.
+        # The full path to the file containing a system ID.
+        # This is used when system_id_source is set to 'file'.
+        # Comments starting with the character # are ignored.
+        # This configuration option does not have a default value defined.
+
+        # Configuration option global/use_lvmpolld.
+        # Use lvmpolld to supervise long running LVM commands.
+        # When enabled, control of long running LVM commands is transferred
+        # from the original LVM command to the lvmpolld daemon. This allows
+        # the operation to continue independent of the original LVM command.
+        # After lvmpolld takes over, the LVM command displays the progress
+        # of the ongoing operation. lvmpolld itself runs LVM commands to
+        # manage the progress of ongoing operations. lvmpolld can be used as
+        # a native systemd service, which allows it to be started on demand,
+        # and to use its own control group. When this option is disabled, LVM
+        # commands will supervise long running operations by forking themselves.
+        use_lvmpolld = 1
 }
 
 # Configuration section activation.
 activation {
 
-	# Configuration option activation/checks.
-	# Perform internal checks of libdevmapper operations.
-	# Useful for debugging problems with activation. Some of the checks may
-	# be expensive, so it's best to use this only when there seems to be a
-	# problem.
-	checks = 0
-
-	# Configuration option activation/udev_sync.
-	# Use udev notifications to synchronize udev and LVM.
-	# The --nodevsync option overrides this setting.
-	# When disabled, LVM commands will not wait for notifications from
-	# udev, but continue irrespective of any possible udev processing in
-	# the background. Only use this if udev is not running or has rules
-	# that ignore the devices LVM creates. If enabled when udev is not
-	# running, and LVM processes are waiting for udev, run the command
-	# 'dmsetup udevcomplete_all' to wake them up.
-	udev_sync = 1
-
-	# Configuration option activation/udev_rules.
-	# Use udev rules to manage LV device nodes and symlinks.
-	# When disabled, LVM will manage the device nodes and symlinks for
-	# active LVs itself. Manual intervention may be required if this
-	# setting is changed while LVs are active.
-	udev_rules = 1
-
-	# Configuration option activation/verify_udev_operations.
-	# Use extra checks in LVM to verify udev operations.
-	# This enables additional checks (and if necessary, repairs) on entries
-	# in the device directory after udev has completed processing its
-	# events. Useful for diagnosing problems with LVM/udev interactions.
-	verify_udev_operations = 0
-
-	# Configuration option activation/retry_deactivation.
-	# Retry failed LV deactivation.
-	# If LV deactivation fails, LVM will retry for a few seconds before
-	# failing. This may happen because a process run from a quick udev rule
-	# temporarily opened the device.
-	retry_deactivation = 1
-
-	# Configuration option activation/missing_stripe_filler.
-	# Method to fill missing stripes when activating an incomplete LV.
-	# Using 'error' will make inaccessible parts of the device return I/O
-	# errors on access. You can instead use a device path, in which case,
-	# that device will be used in place of missing stripes. Using anything
-	# other than 'error' with mirrored or snapshotted volumes is likely to
-	# result in data corruption.
-	# This configuration option is advanced.
-	missing_stripe_filler = "error"
-
-	# Configuration option activation/use_linear_target.
-	# Use the linear target to optimize single stripe LVs.
-	# When disabled, the striped target is used. The linear target is an
-	# optimised version of the striped target that only handles a single
-	# stripe.
-	use_linear_target = 1
-
-	# Configuration option activation/reserved_stack.
-	# Stack size in KiB to reserve for use while devices are suspended.
-	# Insufficent reserve risks I/O deadlock during device suspension.
-	reserved_stack = 64
-
-	# Configuration option activation/reserved_memory.
-	# Memory size in KiB to reserve for use while devices are suspended.
-	# Insufficent reserve risks I/O deadlock during device suspension.
-	reserved_memory = 8192
-
-	# Configuration option activation/process_priority.
-	# Nice value used while devices are suspended.
-	# Use a high priority so that LVs are suspended
-	# for the shortest possible time.
-	process_priority = -18
-
-	# Configuration option activation/volume_list.
-	# Only LVs selected by this list are activated.
-	# If this list is defined, an LV is only activated if it matches an
-	# entry in this list. If this list is undefined, it imposes no limits
-	# on LV activation (all are allowed).
-	# 
-	# Accepted values:
-	#   vgname
-	#     The VG name is matched exactly and selects all LVs in the VG.
-	#   vgname/lvname
-	#     The VG name and LV name are matched exactly and selects the LV.
-	#   @tag
-	#     Selects an LV if the specified tag matches a tag set on the LV
-	#     or VG.
-	#   @*
-	#     Selects an LV if a tag defined on the host is also set on the LV
-	#     or VG. See tags/hosttags. If any host tags exist but volume_list
-	#     is not defined, a default single-entry list containing '@*' is
-	#     assumed.
-	# 
-	# Example
-	# volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
-	# 
-	# This configuration option does not have a default value defined.
-
-	# Configuration option activation/auto_activation_volume_list.
-	# Only LVs selected by this list are auto-activated.
-	# This list works like volume_list, but it is used only by
-	# auto-activation commands. It does not apply to direct activation
-	# commands. If this list is defined, an LV is only auto-activated
-	# if it matches an entry in this list. If this list is undefined, it
-	# imposes no limits on LV auto-activation (all are allowed.) If this
-	# list is defined and empty, i.e. "[]", then no LVs are selected for
-	# auto-activation. An LV that is selected by this list for
-	# auto-activation, must also be selected by volume_list (if defined)
-	# before it is activated. Auto-activation is an activation command that
-	# includes the 'a' argument: --activate ay or -a ay. The 'a' (auto)
-	# argument for auto-activation is meant to be used by activation
-	# commands that are run automatically by the system, as opposed to LVM
-	# commands run directly by a user. A user may also use the 'a' flag
-	# directly to perform auto-activation. Also see pvscan(8) for more
-	# information about auto-activation.
-	# 
-	# Accepted values:
-	#   vgname
-	#     The VG name is matched exactly and selects all LVs in the VG.
-	#   vgname/lvname
-	#     The VG name and LV name are matched exactly and selects the LV.
-	#   @tag
-	#     Selects an LV if the specified tag matches a tag set on the LV
-	#     or VG.
-	#   @*
-	#     Selects an LV if a tag defined on the host is also set on the LV
-	#     or VG. See tags/hosttags. If any host tags exist but volume_list
-	#     is not defined, a default single-entry list containing '@*' is
-	#     assumed.
-	# 
-	# Example
-	# volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
-	# 
-	# This configuration option does not have a default value defined.
-
-	# Configuration option activation/read_only_volume_list.
-	# LVs in this list are activated in read-only mode.
-	# If this list is defined, each LV that is to be activated is checked
-	# against this list, and if it matches, it is activated in read-only
-	# mode. This overrides the permission setting stored in the metadata,
-	# e.g. from --permission rw.
-	# 
-	# Accepted values:
-	#   vgname
-	#     The VG name is matched exactly and selects all LVs in the VG.
-	#   vgname/lvname
-	#     The VG name and LV name are matched exactly and selects the LV.
-	#   @tag
-	#     Selects an LV if the specified tag matches a tag set on the LV
-	#     or VG.
-	#   @*
-	#     Selects an LV if a tag defined on the host is also set on the LV
-	#     or VG. See tags/hosttags. If any host tags exist but volume_list
-	#     is not defined, a default single-entry list containing '@*' is
-	#     assumed.
-	# 
-	# Example
-	# volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
-	# 
-	# This configuration option does not have a default value defined.
-
-	# Configuration option activation/raid_region_size.
-	# Size in KiB of each raid or mirror synchronization region.
-	# For raid or mirror segment types, this is the amount of data that is
-	# copied at once when initializing, or moved at once by pvmove.
-	raid_region_size = 512
-
-	# Configuration option activation/error_when_full.
-	# Return errors if a thin pool runs out of space.
-	# The --errorwhenfull option overrides this setting.
-	# When enabled, writes to thin LVs immediately return an error if the
-	# thin pool is out of data space. When disabled, writes to thin LVs
-	# are queued if the thin pool is out of space, and processed when the
-	# thin pool data space is extended. New thin pools are assigned the
-	# behavior defined here.
-	# This configuration option has an automatic default value.
-	# error_when_full = 0
-
-	# Configuration option activation/readahead.
-	# Setting to use when there is no readahead setting in metadata.
-	# 
-	# Accepted values:
-	#   none
-	#     Disable readahead.
-	#   auto
-	#     Use default value chosen by kernel.
-	# 
-	readahead = "auto"
-
-	# Configuration option activation/raid_fault_policy.
-	# Defines how a device failure in a RAID LV is handled.
-	# This includes LVs that have the following segment types:
-	# raid1, raid4, raid5*, and raid6*.
-	# If a device in the LV fails, the policy determines the steps
-	# performed by dmeventd automatically, and the steps perfomed by the
-	# manual command lvconvert --repair --use-policies.
-	# Automatic handling requires dmeventd to be monitoring the LV.
-	# 
-	# Accepted values:
-	#   warn
-	#     Use the system log to warn the user that a device in the RAID LV
-	#     has failed. It is left to the user to run lvconvert --repair
-	#     manually to remove or replace the failed device. As long as the
-	#     number of failed devices does not exceed the redundancy of the LV
-	#     (1 device for raid4/5, 2 for raid6), the LV will remain usable.
-	#   allocate
-	#     Attempt to use any extra physical volumes in the VG as spares and
-	#     replace faulty devices.
-	# 
-	raid_fault_policy = "warn"
-
-	# Configuration option activation/mirror_image_fault_policy.
-	# Defines how a device failure in a 'mirror' LV is handled.
-	# An LV with the 'mirror' segment type is composed of mirror images
-	# (copies) and a mirror log. A disk log ensures that a mirror LV does
-	# not need to be re-synced (all copies made the same) every time a
-	# machine reboots or crashes. If a device in the LV fails, this policy
-	# determines the steps perfomed by dmeventd automatically, and the steps
-	# performed by the manual command lvconvert --repair --use-policies.
-	# Automatic handling requires dmeventd to be monitoring the LV.
-	# 
-	# Accepted values:
-	#   remove
-	#     Simply remove the faulty device and run without it. If the log
-	#     device fails, the mirror would convert to using an in-memory log.
-	#     This means the mirror will not remember its sync status across
-	#     crashes/reboots and the entire mirror will be re-synced. If a
-	#     mirror image fails, the mirror will convert to a non-mirrored
-	#     device if there is only one remaining good copy.
-	#   allocate
-	#     Remove the faulty device and try to allocate space on a new
-	#     device to be a replacement for the failed device. Using this
-	#     policy for the log is fast and maintains the ability to remember
-	#     sync state through crashes/reboots. Using this policy for a
-	#     mirror device is slow, as it requires the mirror to resynchronize
-	#     the devices, but it will preserve the mirror characteristic of
-	#     the device. This policy acts like 'remove' if no suitable device
-	#     and space can be allocated for the replacement.
-	#   allocate_anywhere
-	#     Not yet implemented. Useful to place the log device temporarily
-	#     on the same physical volume as one of the mirror images. This
-	#     policy is not recommended for mirror devices since it would break
-	#     the redundant nature of the mirror. This policy acts like
-	#     'remove' if no suitable device and space can be allocated for the
-	#     replacement.
-	# 
-	mirror_image_fault_policy = "remove"
-
-	# Configuration option activation/mirror_log_fault_policy.
-	# Defines how a device failure in a 'mirror' log LV is handled.
-	# The mirror_image_fault_policy description for mirrored LVs also
-	# applies to mirrored log LVs.
-	mirror_log_fault_policy = "allocate"
-
-	# Configuration option activation/snapshot_autoextend_threshold.
-	# Auto-extend a snapshot when its usage exceeds this percent.
-	# Setting this to 100 disables automatic extension.
-	# The minimum value is 50 (a smaller value is treated as 50.)
-	# Also see snapshot_autoextend_percent.
-	# Automatic extension requires dmeventd to be monitoring the LV.
-	# 
-	# Example
-	# Using 70% autoextend threshold and 20% autoextend size, when a 1G
-	# snapshot exceeds 700M, it is extended to 1.2G, and when it exceeds
-	# 840M, it is extended to 1.44G:
-	# snapshot_autoextend_threshold = 70
-	# 
-	snapshot_autoextend_threshold = 100
-
-	# Configuration option activation/snapshot_autoextend_percent.
-	# Auto-extending a snapshot adds this percent extra space.
-	# The amount of additional space added to a snapshot is this
-	# percent of its current size.
-	# 
-	# Example
-	# Using 70% autoextend threshold and 20% autoextend size, when a 1G
-	# snapshot exceeds 700M, it is extended to 1.2G, and when it exceeds
-	# 840M, it is extended to 1.44G:
-	# snapshot_autoextend_percent = 20
-	# 
-	snapshot_autoextend_percent = 20
-
-	# Configuration option activation/thin_pool_autoextend_threshold.
-	# Auto-extend a thin pool when its usage exceeds this percent.
-	# Setting this to 100 disables automatic extension.
-	# The minimum value is 50 (a smaller value is treated as 50.)
-	# Also see thin_pool_autoextend_percent.
-	# Automatic extension requires dmeventd to be monitoring the LV.
-	# 
-	# Example
-	# Using 70% autoextend threshold and 20% autoextend size, when a 1G
-	# thin pool exceeds 700M, it is extended to 1.2G, and when it exceeds
-	# 840M, it is extended to 1.44G:
-	# thin_pool_autoextend_threshold = 70
-	# 
-	thin_pool_autoextend_threshold = 100
-
-	# Configuration option activation/thin_pool_autoextend_percent.
-	# Auto-extending a thin pool adds this percent extra space.
-	# The amount of additional space added to a thin pool is this
-	# percent of its current size.
-	# 
-	# Example
-	# Using 70% autoextend threshold and 20% autoextend size, when a 1G
-	# thin pool exceeds 700M, it is extended to 1.2G, and when it exceeds
-	# 840M, it is extended to 1.44G:
-	# thin_pool_autoextend_percent = 20
-	# 
-	thin_pool_autoextend_percent = 20
-
-	# Configuration option activation/mlock_filter.
-	# Do not mlock these memory areas.
-	# While activating devices, I/O to devices being (re)configured is
-	# suspended. As a precaution against deadlocks, LVM pins memory it is
-	# using so it is not paged out, and will not require I/O to reread.
-	# Groups of pages that are known not to be accessed during activation
-	# do not need to be pinned into memory. Each string listed in this
-	# setting is compared against each line in /proc/self/maps, and the
-	# pages corresponding to lines that match are not pinned. On some
-	# systems, locale-archive was found to make up over 80% of the memory
-	# used by the process.
-	# 
-	# Example
-	# mlock_filter = [ "locale/locale-archive", "gconv/gconv-modules.cache" ]
-	# 
-	# This configuration option is advanced.
-	# This configuration option does not have a default value defined.
-
-	# Configuration option activation/use_mlockall.
-	# Use the old behavior of mlockall to pin all memory.
-	# Prior to version 2.02.62, LVM used mlockall() to pin the whole
-	# process's memory while activating devices.
-	use_mlockall = 0
-
-	# Configuration option activation/monitoring.
-	# Monitor LVs that are activated.
-	# The --ignoremonitoring option overrides this setting.
-	# When enabled, LVM will ask dmeventd to monitor activated LVs.
-	monitoring = 1
-
-	# Configuration option activation/polling_interval.
-	# Check pvmove or lvconvert progress at this interval (seconds).
-	# When pvmove or lvconvert must wait for the kernel to finish
-	# synchronising or merging data, they check and report progress at
-	# intervals of this number of seconds. If this is set to 0 and there
-	# is only one thing to wait for, there are no progress reports, but
-	# the process is awoken immediately once the operation is complete.
-	polling_interval = 15
-
-	# Configuration option activation/auto_set_activation_skip.
-	# Set the activation skip flag on new thin snapshot LVs.
-	# The --setactivationskip option overrides this setting.
-	# An LV can have a persistent 'activation skip' flag. The flag causes
-	# the LV to be skipped during normal activation. The lvchange/vgchange
-	# -K option is required to activate LVs that have the activation skip
-	# flag set. When this setting is enabled, the activation skip flag is
-	# set on new thin snapshot LVs.
-	# This configuration option has an automatic default value.
-	# auto_set_activation_skip = 1
-
-	# Configuration option activation/activation_mode.
-	# How LVs with missing devices are activated.
-	# The --activationmode option overrides this setting.
-	# 
-	# Accepted values:
-	#   complete
-	#     Only allow activation of an LV if all of the Physical Volumes it
-	#     uses are present. Other PVs in the Volume Group may be missing.
-	#   degraded
-	#     Like complete, but additionally RAID LVs of segment type raid1,
-	#     raid4, raid5, radid6 and raid10 will be activated if there is no
-	#     data loss, i.e. they have sufficient redundancy to present the
-	#     entire addressable range of the Logical Volume.
-	#   partial
-	#     Allows the activation of any LV even if a missing or failed PV
-	#     could cause data loss with a portion of the LV inaccessible.
-	#     This setting should not normally be used, but may sometimes
-	#     assist with data recovery.
-	# 
-	activation_mode = "degraded"
-
-	# Configuration option activation/lock_start_list.
-	# Locking is started only for VGs selected by this list.
-	# The rules are the same as those for volume_list.
-	# This configuration option does not have a default value defined.
-
-	# Configuration option activation/auto_lock_start_list.
-	# Locking is auto-started only for VGs selected by this list.
-	# The rules are the same as those for auto_activation_volume_list.
-	# This configuration option does not have a default value defined.
+        # Configuration option activation/checks.
+        # Perform internal checks of libdevmapper operations.
+        # Useful for debugging problems with activation. Some of the checks may
+        # be expensive, so it's best to use this only when there seems to be a
+        # problem.
+        checks = 0
+
+        # Configuration option activation/udev_sync.
+        # Use udev notifications to synchronize udev and LVM.
+        # The --nodevsync option overrides this setting.
+        # When disabled, LVM commands will not wait for notifications from
+        # udev, but continue irrespective of any possible udev processing in
+        # the background. Only use this if udev is not running or has rules
+        # that ignore the devices LVM creates. If enabled when udev is not
+        # running, and LVM processes are waiting for udev, run the command
+        # 'dmsetup udevcomplete_all' to wake them up.
+        udev_sync = 1
+
+        # Configuration option activation/udev_rules.
+        # Use udev rules to manage LV device nodes and symlinks.
+        # When disabled, LVM will manage the device nodes and symlinks for
+        # active LVs itself. Manual intervention may be required if this
+        # setting is changed while LVs are active.
+        udev_rules = 1
+
+        # Configuration option activation/verify_udev_operations.
+        # Use extra checks in LVM to verify udev operations.
+        # This enables additional checks (and if necessary, repairs) on entries
+        # in the device directory after udev has completed processing its
+        # events. Useful for diagnosing problems with LVM/udev interactions.
+        verify_udev_operations = 0
+
+        # Configuration option activation/retry_deactivation.
+        # Retry failed LV deactivation.
+        # If LV deactivation fails, LVM will retry for a few seconds before
+        # failing. This may happen because a process run from a quick udev rule
+        # temporarily opened the device.
+        retry_deactivation = 1
+
+        # Configuration option activation/missing_stripe_filler.
+        # Method to fill missing stripes when activating an incomplete LV.
+        # Using 'error' will make inaccessible parts of the device return I/O
+        # errors on access. You can instead use a device path, in which case,
+        # that device will be used in place of missing stripes. Using anything
+        # other than 'error' with mirrored or snapshotted volumes is likely to
+        # result in data corruption.
+        # This configuration option is advanced.
+        missing_stripe_filler = "error"
+
+        # Configuration option activation/use_linear_target.
+        # Use the linear target to optimize single stripe LVs.
+        # When disabled, the striped target is used. The linear target is an
+        # optimised version of the striped target that only handles a single
+        # stripe.
+        use_linear_target = 1
+
+        # Configuration option activation/reserved_stack.
+        # Stack size in KiB to reserve for use while devices are suspended.
+        # Insufficent reserve risks I/O deadlock during device suspension.
+        reserved_stack = 64
+
+        # Configuration option activation/reserved_memory.
+        # Memory size in KiB to reserve for use while devices are suspended.
+        # Insufficent reserve risks I/O deadlock during device suspension.
+        reserved_memory = 8192
+
+        # Configuration option activation/process_priority.
+        # Nice value used while devices are suspended.
+        # Use a high priority so that LVs are suspended
+        # for the shortest possible time.
+        process_priority = -18
+
+        # Configuration option activation/volume_list.
+        # Only LVs selected by this list are activated.
+        # If this list is defined, an LV is only activated if it matches an
+        # entry in this list. If this list is undefined, it imposes no limits
+        # on LV activation (all are allowed).
+        # 
+        # Accepted values:
+        #   vgname
+        #     The VG name is matched exactly and selects all LVs in the VG.
+        #   vgname/lvname
+        #     The VG name and LV name are matched exactly and selects the LV.
+        #   @tag
+        #     Selects an LV if the specified tag matches a tag set on the LV
+        #     or VG.
+        #   @*
+        #     Selects an LV if a tag defined on the host is also set on the LV
+        #     or VG. See tags/hosttags. If any host tags exist but volume_list
+        #     is not defined, a default single-entry list containing '@*' is
+        #     assumed.
+        # 
+        # Example
+        # volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
+        # 
+        # This configuration option does not have a default value defined.
+
+        # Configuration option activation/auto_activation_volume_list.
+        # Only LVs selected by this list are auto-activated.
+        # This list works like volume_list, but it is used only by
+        # auto-activation commands. It does not apply to direct activation
+        # commands. If this list is defined, an LV is only auto-activated
+        # if it matches an entry in this list. If this list is undefined, it
+        # imposes no limits on LV auto-activation (all are allowed.) If this
+        # list is defined and empty, i.e. "[]", then no LVs are selected for
+        # auto-activation. An LV that is selected by this list for
+        # auto-activation, must also be selected by volume_list (if defined)
+        # before it is activated. Auto-activation is an activation command that
+        # includes the 'a' argument: --activate ay or -a ay. The 'a' (auto)
+        # argument for auto-activation is meant to be used by activation
+        # commands that are run automatically by the system, as opposed to LVM
+        # commands run directly by a user. A user may also use the 'a' flag
+        # directly to perform auto-activation. Also see pvscan(8) for more
+        # information about auto-activation.
+        # 
+        # Accepted values:
+        #   vgname
+        #     The VG name is matched exactly and selects all LVs in the VG.
+        #   vgname/lvname
+        #     The VG name and LV name are matched exactly and selects the LV.
+        #   @tag
+        #     Selects an LV if the specified tag matches a tag set on the LV
+        #     or VG.
+        #   @*
+        #     Selects an LV if a tag defined on the host is also set on the LV
+        #     or VG. See tags/hosttags. If any host tags exist but volume_list
+        #     is not defined, a default single-entry list containing '@*' is
+        #     assumed.
+        # 
+        # Example
+        # volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
+        # 
+        # This configuration option does not have a default value defined.
+
+        # Configuration option activation/read_only_volume_list.
+        # LVs in this list are activated in read-only mode.
+        # If this list is defined, each LV that is to be activated is checked
+        # against this list, and if it matches, it is activated in read-only
+        # mode. This overrides the permission setting stored in the metadata,
+        # e.g. from --permission rw.
+        # 
+        # Accepted values:
+        #   vgname
+        #     The VG name is matched exactly and selects all LVs in the VG.
+        #   vgname/lvname
+        #     The VG name and LV name are matched exactly and selects the LV.
+        #   @tag
+        #     Selects an LV if the specified tag matches a tag set on the LV
+        #     or VG.
+        #   @*
+        #     Selects an LV if a tag defined on the host is also set on the LV
+        #     or VG. See tags/hosttags. If any host tags exist but volume_list
+        #     is not defined, a default single-entry list containing '@*' is
+        #     assumed.
+        # 
+        # Example
+        # volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
+        # 
+        # This configuration option does not have a default value defined.
+
+        # Configuration option activation/raid_region_size.
+        # Size in KiB of each raid or mirror synchronization region.
+        # For raid or mirror segment types, this is the amount of data that is
+        # copied at once when initializing, or moved at once by pvmove.
+        raid_region_size = 512
+
+        # Configuration option activation/error_when_full.
+        # Return errors if a thin pool runs out of space.
+        # The --errorwhenfull option overrides this setting.
+        # When enabled, writes to thin LVs immediately return an error if the
+        # thin pool is out of data space. When disabled, writes to thin LVs
+        # are queued if the thin pool is out of space, and processed when the
+        # thin pool data space is extended. New thin pools are assigned the
+        # behavior defined here.
+        # This configuration option has an automatic default value.
+        # error_when_full = 0
+
+        # Configuration option activation/readahead.
+        # Setting to use when there is no readahead setting in metadata.
+        # 
+        # Accepted values:
+        #   none
+        #     Disable readahead.
+        #   auto
+        #     Use default value chosen by kernel.
+        # 
+        readahead = "auto"
+
+        # Configuration option activation/raid_fault_policy.
+        # Defines how a device failure in a RAID LV is handled.
+        # This includes LVs that have the following segment types:
+        # raid1, raid4, raid5*, and raid6*.
+        # If a device in the LV fails, the policy determines the steps
+        # performed by dmeventd automatically, and the steps perfomed by the
+        # manual command lvconvert --repair --use-policies.
+        # Automatic handling requires dmeventd to be monitoring the LV.
+        # 
+        # Accepted values:
+        #   warn
+        #     Use the system log to warn the user that a device in the RAID LV
+        #     has failed. It is left to the user to run lvconvert --repair
+        #     manually to remove or replace the failed device. As long as the
+        #     number of failed devices does not exceed the redundancy of the LV
+        #     (1 device for raid4/5, 2 for raid6), the LV will remain usable.
+        #   allocate
+        #     Attempt to use any extra physical volumes in the VG as spares and
+        #     replace faulty devices.
+        # 
+        raid_fault_policy = "warn"
+
+        # Configuration option activation/mirror_image_fault_policy.
+        # Defines how a device failure in a 'mirror' LV is handled.
+        # An LV with the 'mirror' segment type is composed of mirror images
+        # (copies) and a mirror log. A disk log ensures that a mirror LV does
+        # not need to be re-synced (all copies made the same) every time a
+        # machine reboots or crashes. If a device in the LV fails, this policy
+        # determines the steps perfomed by dmeventd automatically, and the steps
+        # performed by the manual command lvconvert --repair --use-policies.
+        # Automatic handling requires dmeventd to be monitoring the LV.
+        # 
+        # Accepted values:
+        #   remove
+        #     Simply remove the faulty device and run without it. If the log
+        #     device fails, the mirror would convert to using an in-memory log.
+        #     This means the mirror will not remember its sync status across
+        #     crashes/reboots and the entire mirror will be re-synced. If a
+        #     mirror image fails, the mirror will convert to a non-mirrored
+        #     device if there is only one remaining good copy.
+        #   allocate
+        #     Remove the faulty device and try to allocate space on a new
+        #     device to be a replacement for the failed device. Using this
+        #     policy for the log is fast and maintains the ability to remember
+        #     sync state through crashes/reboots. Using this policy for a
+        #     mirror device is slow, as it requires the mirror to resynchronize
+        #     the devices, but it will preserve the mirror characteristic of
+        #     the device. This policy acts like 'remove' if no suitable device
+        #     and space can be allocated for the replacement.
+        #   allocate_anywhere
+        #     Not yet implemented. Useful to place the log device temporarily
+        #     on the same physical volume as one of the mirror images. This
+        #     policy is not recommended for mirror devices since it would break
+        #     the redundant nature of the mirror. This policy acts like
+        #     'remove' if no suitable device and space can be allocated for the
+        #     replacement.
+        # 
+        mirror_image_fault_policy = "remove"
+
+        # Configuration option activation/mirror_log_fault_policy.
+        # Defines how a device failure in a 'mirror' log LV is handled.
+        # The mirror_image_fault_policy description for mirrored LVs also
+        # applies to mirrored log LVs.
+        mirror_log_fault_policy = "allocate"
+
+        # Configuration option activation/snapshot_autoextend_threshold.
+        # Auto-extend a snapshot when its usage exceeds this percent.
+        # Setting this to 100 disables automatic extension.
+        # The minimum value is 50 (a smaller value is treated as 50.)
+        # Also see snapshot_autoextend_percent.
+        # Automatic extension requires dmeventd to be monitoring the LV.
+        # 
+        # Example
+        # Using 70% autoextend threshold and 20% autoextend size, when a 1G
+        # snapshot exceeds 700M, it is extended to 1.2G, and when it exceeds
+        # 840M, it is extended to 1.44G:
+        # snapshot_autoextend_threshold = 70
+        # 
+        snapshot_autoextend_threshold = 100
+
+        # Configuration option activation/snapshot_autoextend_percent.
+        # Auto-extending a snapshot adds this percent extra space.
+        # The amount of additional space added to a snapshot is this
+        # percent of its current size.
+        # 
+        # Example
+        # Using 70% autoextend threshold and 20% autoextend size, when a 1G
+        # snapshot exceeds 700M, it is extended to 1.2G, and when it exceeds
+        # 840M, it is extended to 1.44G:
+        # snapshot_autoextend_percent = 20
+        # 
+        snapshot_autoextend_percent = 20
+
+        # Configuration option activation/thin_pool_autoextend_threshold.
+        # Auto-extend a thin pool when its usage exceeds this percent.
+        # Setting this to 100 disables automatic extension.
+        # The minimum value is 50 (a smaller value is treated as 50.)
+        # Also see thin_pool_autoextend_percent.
+        # Automatic extension requires dmeventd to be monitoring the LV.
+        # 
+        # Example
+        # Using 70% autoextend threshold and 20% autoextend size, when a 1G
+        # thin pool exceeds 700M, it is extended to 1.2G, and when it exceeds
+        # 840M, it is extended to 1.44G:
+        # thin_pool_autoextend_threshold = 70
+        # 
+        thin_pool_autoextend_threshold = 100
+
+        # Configuration option activation/thin_pool_autoextend_percent.
+        # Auto-extending a thin pool adds this percent extra space.
+        # The amount of additional space added to a thin pool is this
+        # percent of its current size.
+        # 
+        # Example
+        # Using 70% autoextend threshold and 20% autoextend size, when a 1G
+        # thin pool exceeds 700M, it is extended to 1.2G, and when it exceeds
+        # 840M, it is extended to 1.44G:
+        # thin_pool_autoextend_percent = 20
+        # 
+        thin_pool_autoextend_percent = 20
+
+        # Configuration option activation/mlock_filter.
+        # Do not mlock these memory areas.
+        # While activating devices, I/O to devices being (re)configured is
+        # suspended. As a precaution against deadlocks, LVM pins memory it is
+        # using so it is not paged out, and will not require I/O to reread.
+        # Groups of pages that are known not to be accessed during activation
+        # do not need to be pinned into memory. Each string listed in this
+        # setting is compared against each line in /proc/self/maps, and the
+        # pages corresponding to lines that match are not pinned. On some
+        # systems, locale-archive was found to make up over 80% of the memory
+        # used by the process.
+        # 
+        # Example
+        # mlock_filter = [ "locale/locale-archive", "gconv/gconv-modules.cache" ]
+        # 
+        # This configuration option is advanced.
+        # This configuration option does not have a default value defined.
+
+        # Configuration option activation/use_mlockall.
+        # Use the old behavior of mlockall to pin all memory.
+        # Prior to version 2.02.62, LVM used mlockall() to pin the whole
+        # process's memory while activating devices.
+        use_mlockall = 0
+
+        # Configuration option activation/monitoring.
+        # Monitor LVs that are activated.
+        # The --ignoremonitoring option overrides this setting.
+        # When enabled, LVM will ask dmeventd to monitor activated LVs.
+        monitoring = 1
+
+        # Configuration option activation/polling_interval.
+        # Check pvmove or lvconvert progress at this interval (seconds).
+        # When pvmove or lvconvert must wait for the kernel to finish
+        # synchronising or merging data, they check and report progress at
+        # intervals of this number of seconds. If this is set to 0 and there
+        # is only one thing to wait for, there are no progress reports, but
+        # the process is awoken immediately once the operation is complete.
+        polling_interval = 15
+
+        # Configuration option activation/auto_set_activation_skip.
+        # Set the activation skip flag on new thin snapshot LVs.
+        # The --setactivationskip option overrides this setting.
+        # An LV can have a persistent 'activation skip' flag. The flag causes
+        # the LV to be skipped during normal activation. The lvchange/vgchange
+        # -K option is required to activate LVs that have the activation skip
+        # flag set. When this setting is enabled, the activation skip flag is
+        # set on new thin snapshot LVs.
+        # This configuration option has an automatic default value.
+        # auto_set_activation_skip = 1
+
+        # Configuration option activation/activation_mode.
+        # How LVs with missing devices are activated.
+        # The --activationmode option overrides this setting.
+        # 
+        # Accepted values:
+        #   complete
+        #     Only allow activation of an LV if all of the Physical Volumes it
+        #     uses are present. Other PVs in the Volume Group may be missing.
+        #   degraded
+        #     Like complete, but additionally RAID LVs of segment type raid1,
+        #     raid4, raid5, radid6 and raid10 will be activated if there is no
+        #     data loss, i.e. they have sufficient redundancy to present the
+        #     entire addressable range of the Logical Volume.
+        #   partial
+        #     Allows the activation of any LV even if a missing or failed PV
+        #     could cause data loss with a portion of the LV inaccessible.
+        #     This setting should not normally be used, but may sometimes
+        #     assist with data recovery.
+        # 
+        activation_mode = "degraded"
+
+        # Configuration option activation/lock_start_list.
+        # Locking is started only for VGs selected by this list.
+        # The rules are the same as those for volume_list.
+        # This configuration option does not have a default value defined.
+
+        # Configuration option activation/auto_lock_start_list.
+        # Locking is auto-started only for VGs selected by this list.
+        # The rules are the same as those for auto_activation_volume_list.
+        # This configuration option does not have a default value defined.
 }
 
 # Configuration section metadata.
 # This configuration section has an automatic default value.
 # metadata {
 
-	# Configuration option metadata/pvmetadatacopies.
-	# Number of copies of metadata to store on each PV.
-	# The --pvmetadatacopies option overrides this setting.
-	# 
-	# Accepted values:
-	#   2
-	#     Two copies of the VG metadata are stored on the PV, one at the
-	#     front of the PV, and one at the end.
-	#   1
-	#     One copy of VG metadata is stored at the front of the PV.
-	#   0
-	#     No copies of VG metadata are stored on the PV. This may be
-	#     useful for VGs containing large numbers of PVs.
-	# 
-	# This configuration option is advanced.
-	# This configuration option has an automatic default value.
-	# pvmetadatacopies = 1
-
-	# Configuration option metadata/vgmetadatacopies.
-	# Number of copies of metadata to maintain for each VG.
-	# The --vgmetadatacopies option overrides this setting.
-	# If set to a non-zero value, LVM automatically chooses which of the
-	# available metadata areas to use to achieve the requested number of
-	# copies of the VG metadata. If you set a value larger than the the
-	# total number of metadata areas available, then metadata is stored in
-	# them all. The value 0 (unmanaged) disables this automatic management
-	# and allows you to control which metadata areas are used at the
-	# individual PV level using pvchange --metadataignore y|n.
-	# This configuration option has an automatic default value.
-	# vgmetadatacopies = 0
-
-	# Configuration option metadata/pvmetadatasize.
-	# Approximate number of sectors to use for each metadata copy.
-	# VGs with large numbers of PVs or LVs, or VGs containing complex LV
-	# structures, may need additional space for VG metadata. The metadata
-	# areas are treated as circular buffers, so unused space becomes filled
-	# with an archive of the most recent previous versions of the metadata.
-	# This configuration option has an automatic default value.
-	# pvmetadatasize = 255
-
-	# Configuration option metadata/pvmetadataignore.
-	# Ignore metadata areas on a new PV.
-	# The --metadataignore option overrides this setting.
-	# If metadata areas on a PV are ignored, LVM will not store metadata
-	# in them.
-	# This configuration option is advanced.
-	# This configuration option has an automatic default value.
-	# pvmetadataignore = 0
-
-	# Configuration option metadata/stripesize.
-	# This configuration option is advanced.
-	# This configuration option has an automatic default value.
-	# stripesize = 64
-
-	# Configuration option metadata/dirs.
-	# Directories holding live copies of text format metadata.
-	# These directories must not be on logical volumes!
-	# It's possible to use LVM with a couple of directories here,
-	# preferably on different (non-LV) filesystems, and with no other
-	# on-disk metadata (pvmetadatacopies = 0). Or this can be in addition
-	# to on-disk metadata areas. The feature was originally added to
-	# simplify testing and is not supported under low memory situations -
-	# the machine could lock up. Never edit any files in these directories
-	# by hand unless you are absolutely sure you know what you are doing!
-	# Use the supplied toolset to make changes (e.g. vgcfgrestore).
-	# 
-	# Example
-	# dirs = [ "/etc/lvm/metadata", "/mnt/disk2/lvm/metadata2" ]
-	# 
-	# This configuration option is advanced.
-	# This configuration option does not have a default value defined.
+        # Configuration option metadata/pvmetadatacopies.
+        # Number of copies of metadata to store on each PV.
+        # The --pvmetadatacopies option overrides this setting.
+        # 
+        # Accepted values:
+        #   2
+        #     Two copies of the VG metadata are stored on the PV, one at the
+        #     front of the PV, and one at the end.
+        #   1
+        #     One copy of VG metadata is stored at the front of the PV.
+        #   0
+        #     No copies of VG metadata are stored on the PV. This may be
+        #     useful for VGs containing large numbers of PVs.
+        # 
+        # This configuration option is advanced.
+        # This configuration option has an automatic default value.
+        # pvmetadatacopies = 1
+
+        # Configuration option metadata/vgmetadatacopies.
+        # Number of copies of metadata to maintain for each VG.
+        # The --vgmetadatacopies option overrides this setting.
+        # If set to a non-zero value, LVM automatically chooses which of the
+        # available metadata areas to use to achieve the requested number of
+        # copies of the VG metadata. If you set a value larger than the the
+        # total number of metadata areas available, then metadata is stored in
+        # them all. The value 0 (unmanaged) disables this automatic management
+        # and allows you to control which metadata areas are used at the
+        # individual PV level using pvchange --metadataignore y|n.
+        # This configuration option has an automatic default value.
+        # vgmetadatacopies = 0
+
+        # Configuration option metadata/pvmetadatasize.
+        # Approximate number of sectors to use for each metadata copy.
+        # VGs with large numbers of PVs or LVs, or VGs containing complex LV
+        # structures, may need additional space for VG metadata. The metadata
+        # areas are treated as circular buffers, so unused space becomes filled
+        # with an archive of the most recent previous versions of the metadata.
+        # This configuration option has an automatic default value.
+        # pvmetadatasize = 255
+
+        # Configuration option metadata/pvmetadataignore.
+        # Ignore metadata areas on a new PV.
+        # The --metadataignore option overrides this setting.
+        # If metadata areas on a PV are ignored, LVM will not store metadata
+        # in them.
+        # This configuration option is advanced.
+        # This configuration option has an automatic default value.
+        # pvmetadataignore = 0
+
+        # Configuration option metadata/stripesize.
+        # This configuration option is advanced.
+        # This configuration option has an automatic default value.
+        # stripesize = 64
+
+        # Configuration option metadata/dirs.
+        # Directories holding live copies of text format metadata.
+        # These directories must not be on logical volumes!
+        # It's possible to use LVM with a couple of directories here,
+        # preferably on different (non-LV) filesystems, and with no other
+        # on-disk metadata (pvmetadatacopies = 0). Or this can be in addition
+        # to on-disk metadata areas. The feature was originally added to
+        # simplify testing and is not supported under low memory situations -
+        # the machine could lock up. Never edit any files in these directories
+        # by hand unless you are absolutely sure you know what you are doing!
+        # Use the supplied toolset to make changes (e.g. vgcfgrestore).
+        # 
+        # Example
+        # dirs = [ "/etc/lvm/metadata", "/mnt/disk2/lvm/metadata2" ]
+        # 
+        # This configuration option is advanced.
+        # This configuration option does not have a default value defined.
 # }
 
 # Configuration section report.
@@ -1493,357 +1497,357 @@
 # This configuration section has an automatic default value.
 # report {
 
-	# Configuration option report/compact_output.
-	# Do not print empty values for all report fields.
-	# If enabled, all fields that don't have a value set for any of the
-	# rows reported are skipped and not printed. Compact output is
-	# applicable only if report/buffered is enabled. If you need to
-	# compact only specified fields, use compact_output=0 and define
-	# report/compact_output_cols configuration setting instead.
-	# This configuration option has an automatic default value.
-	# compact_output = 0
-
-	# Configuration option report/compact_output_cols.
-	# Do not print empty values for specified report fields.
-	# If defined, specified fields that don't have a value set for any
-	# of the rows reported are skipped and not printed. Compact output
-	# is applicable only if report/buffered is enabled. If you need to
-	# compact all fields, use compact_output=1 instead in which case
-	# the compact_output_cols setting is then ignored.
-	# This configuration option has an automatic default value.
-	# compact_output_cols = ""
-
-	# Configuration option report/aligned.
-	# Align columns in report output.
-	# This configuration option has an automatic default value.
-	# aligned = 1
-
-	# Configuration option report/buffered.
-	# Buffer report output.
-	# When buffered reporting is used, the report's content is appended
-	# incrementally to include each object being reported until the report
-	# is flushed to output which normally happens at the end of command
-	# execution. Otherwise, if buffering is not used, each object is
-	# reported as soon as its processing is finished.
-	# This configuration option has an automatic default value.
-	# buffered = 1
-
-	# Configuration option report/headings.
-	# Show headings for columns on report.
-	# This configuration option has an automatic default value.
-	# headings = 1
-
-	# Configuration option report/separator.
-	# A separator to use on report after each field.
-	# This configuration option has an automatic default value.
-	# separator = " "
-
-	# Configuration option report/list_item_separator.
-	# A separator to use for list items when reported.
-	# This configuration option has an automatic default value.
-	# list_item_separator = ","
-
-	# Configuration option report/prefixes.
-	# Use a field name prefix for each field reported.
-	# This configuration option has an automatic default value.
-	# prefixes = 0
-
-	# Configuration option report/quoted.
-	# Quote field values when using field name prefixes.
-	# This configuration option has an automatic default value.
-	# quoted = 1
-
-	# Configuration option report/colums_as_rows.
-	# Output each column as a row.
-	# If set, this also implies report/prefixes=1.
-	# This configuration option has an automatic default value.
-	# colums_as_rows = 0
-
-	# Configuration option report/binary_values_as_numeric.
-	# Use binary values 0 or 1 instead of descriptive literal values.
-	# For columns that have exactly two valid values to report
-	# (not counting the 'unknown' value which denotes that the
-	# value could not be determined).
-	# This configuration option has an automatic default value.
-	# binary_values_as_numeric = 0
-
-	# Configuration option report/time_format.
-	# Set time format for fields reporting time values.
-	# Format specification is a string which may contain special character
-	# sequences and ordinary character sequences. Ordinary character
-	# sequences are copied verbatim. Each special character sequence is
-	# introduced by the '%' character and such sequence is then
-	# substituted with a value as described below.
-	# 
-	# Accepted values:
-	#   %a
-	#     The abbreviated name of the day of the week according to the
-	#     current locale.
-	#   %A
-	#     The full name of the day of the week according to the current
-	#     locale.
-	#   %b
-	#     The abbreviated month name according to the current locale.
-	#   %B
-	#     The full month name according to the current locale.
-	#   %c
-	#     The preferred date and time representation for the current
-	#     locale (alt E)
-	#   %C
-	#     The century number (year/100) as a 2-digit integer. (alt E)
-	#   %d
-	#     The day of the month as a decimal number (range 01 to 31).
-	#     (alt O)
-	#   %D
-	#     Equivalent to %m/%d/%y. (For Americans only. Americans should
-	#     note that in other countries%d/%m/%y is rather common. This
-	#     means that in international context this format is ambiguous and
-	#     should not be used.
-	#   %e
-	#     Like %d, the day of the month as a decimal number, but a leading
-	#     zero is replaced by a space. (alt O)
-	#   %E
-	#     Modifier: use alternative local-dependent representation if
-	#     available.
-	#   %F
-	#     Equivalent to %Y-%m-%d (the ISO 8601 date format).
-	#   %G
-	#     The ISO 8601 week-based year with century as adecimal number.
-	#     The 4-digit year corresponding to the ISO week number (see %V).
-	#     This has the same format and value as %Y, except that if the
-	#     ISO week number belongs to the previous or next year, that year
-	#     is used instead.
-	#   %g
-	#     Like %G, but without century, that is, with a 2-digit year
-	#     (00-99).
-	#   %h
-	#     Equivalent to %b.
-	#   %H
-	#     The hour as a decimal number using a 24-hour clock
-	#     (range 00 to 23). (alt O)
-	#   %I
-	#     The hour as a decimal number using a 12-hour clock
-	#     (range 01 to 12). (alt O)
-	#   %j
-	#     The day of the year as a decimal number (range 001 to 366).
-	#   %k
-	#     The hour (24-hour clock) as a decimal number (range 0 to 23);
-	#     single digits are preceded by a blank. (See also %H.)
-	#   %l
-	#     The hour (12-hour clock) as a decimal number (range 1 to 12);
-	#     single digits are preceded by a blank. (See also %I.)
-	#   %m
-	#     The month as a decimal number (range 01 to 12). (alt O)
-	#   %M
-	#     The minute as a decimal number (range 00 to 59). (alt O)
-	#   %O
-	#     Modifier: use alternative numeric symbols.
-	#   %p
-	#     Either "AM" or "PM" according to the given time value,
-	#     or the corresponding strings for the current locale. Noon is
-	#     treated as "PM" and midnight as "AM".
-	#   %P
-	#     Like %p but in lowercase: "am" or "pm" or a corresponding
-	#     string for the current locale.
-	#   %r
-	#     The time in a.m. or p.m. notation. In the POSIX locale this is
-	#     equivalent to %I:%M:%S %p.
-	#   %R
-	#     The time in 24-hour notation (%H:%M). For a version including
-	#     the seconds, see %T below.
-	#   %s
-	#     The number of seconds since the Epoch,
-	#     1970-01-01 00:00:00 +0000 (UTC)
-	#   %S
-	#     The second as a decimal number (range 00 to 60). (The range is
-	#     up to 60 to allow for occasional leap seconds.) (alt O)
-	#   %t
-	#     A tab character.
-	#   %T
-	#     The time in 24-hour notation (%H:%M:%S).
-	#   %u
-	#     The day of the week as a decimal, range 1 to 7, Monday being 1.
-	#     See also %w. (alt O)
-	#   %U
-	#     The week number of the current year as a decimal number,
-	#     range 00 to 53, starting with the first Sunday as the first
-	#     day of week 01. See also %V and %W. (alt O)
-	#   %V
-	#     The ISO 8601 week number of the current year as a decimal number,
-	#     range 01 to 53, where week 1 is the first week that has at least
-	#     4 days in the new year. See also %U and %W. (alt O)
-	#   %w
-	#     The day of the week as a decimal, range 0 to 6, Sunday being 0.
-	#     See also %u. (alt O)
-	#   %W
-	#     The week number of the current year as a decimal number,
-	#     range 00 to 53, starting with the first Monday as the first day
-	#     of week 01. (alt O)
-	#   %x
-	#     The preferred date representation for the current locale without
-	#     the time. (alt E)
-	#   %X
-	#     The preferred time representation for the current locale without
-	#     the date. (alt E)
-	#   %y
-	#     The year as a decimal number without a century (range 00 to 99).
-	#     (alt E, alt O)
-	#   %Y
-	#     The year as a decimal number including the century. (alt E)
-	#   %z
-	#     The +hhmm or -hhmm numeric timezone (that is, the hour and minute
-	#     offset from UTC).
-	#   %Z
-	#     The timezone name or abbreviation.
-	#   %%
-	#     A literal '%' character.
-	# 
-	# This configuration option has an automatic default value.
-	# time_format = "%Y-%m-%d %T %z"
-
-	# Configuration option report/devtypes_sort.
-	# List of columns to sort by when reporting 'lvm devtypes' command.
-	# See 'lvm devtypes -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# devtypes_sort = "devtype_name"
-
-	# Configuration option report/devtypes_cols.
-	# List of columns to report for 'lvm devtypes' command.
-	# See 'lvm devtypes -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# devtypes_cols = "devtype_name,devtype_max_partitions,devtype_description"
-
-	# Configuration option report/devtypes_cols_verbose.
-	# List of columns to report for 'lvm devtypes' command in verbose mode.
-	# See 'lvm devtypes -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# devtypes_cols_verbose = "devtype_name,devtype_max_partitions,devtype_description"
-
-	# Configuration option report/lvs_sort.
-	# List of columns to sort by when reporting 'lvs' command.
-	# See 'lvs -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# lvs_sort = "vg_name,lv_name"
-
-	# Configuration option report/lvs_cols.
-	# List of columns to report for 'lvs' command.
-	# See 'lvs -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# lvs_cols = "lv_name,vg_name,lv_attr,lv_size,pool_lv,origin,data_percent,metadata_percent,move_pv,mirror_log,copy_percent,convert_lv"
-
-	# Configuration option report/lvs_cols_verbose.
-	# List of columns to report for 'lvs' command in verbose mode.
-	# See 'lvs -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# lvs_cols_verbose = "lv_name,vg_name,seg_count,lv_attr,lv_size,lv_major,lv_minor,lv_kernel_major,lv_kernel_minor,pool_lv,origin,data_percent,metadata_percent,move_pv,copy_percent,mirror_log,convert_lv,lv_uuid,lv_profile"
-
-	# Configuration option report/vgs_sort.
-	# List of columns to sort by when reporting 'vgs' command.
-	# See 'vgs -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# vgs_sort = "vg_name"
-
-	# Configuration option report/vgs_cols.
-	# List of columns to report for 'vgs' command.
-	# See 'vgs -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# vgs_cols = "vg_name,pv_count,lv_count,snap_count,vg_attr,vg_size,vg_free"
-
-	# Configuration option report/vgs_cols_verbose.
-	# List of columns to report for 'vgs' command in verbose mode.
-	# See 'vgs -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# vgs_cols_verbose = "vg_name,vg_attr,vg_extent_size,pv_count,lv_count,snap_count,vg_size,vg_free,vg_uuid,vg_profile"
-
-	# Configuration option report/pvs_sort.
-	# List of columns to sort by when reporting 'pvs' command.
-	# See 'pvs -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# pvs_sort = "pv_name"
-
-	# Configuration option report/pvs_cols.
-	# List of columns to report for 'pvs' command.
-	# See 'pvs -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# pvs_cols = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free"
-
-	# Configuration option report/pvs_cols_verbose.
-	# List of columns to report for 'pvs' command in verbose mode.
-	# See 'pvs -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# pvs_cols_verbose = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,dev_size,pv_uuid"
-
-	# Configuration option report/segs_sort.
-	# List of columns to sort by when reporting 'lvs --segments' command.
-	# See 'lvs --segments -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# segs_sort = "vg_name,lv_name,seg_start"
-
-	# Configuration option report/segs_cols.
-	# List of columns to report for 'lvs --segments' command.
-	# See 'lvs --segments -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# segs_cols = "lv_name,vg_name,lv_attr,stripes,segtype,seg_size"
-
-	# Configuration option report/segs_cols_verbose.
-	# List of columns to report for 'lvs --segments' command in verbose mode.
-	# See 'lvs --segments -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# segs_cols_verbose = "lv_name,vg_name,lv_attr,seg_start,seg_size,stripes,segtype,stripesize,chunksize"
-
-	# Configuration option report/pvsegs_sort.
-	# List of columns to sort by when reporting 'pvs --segments' command.
-	# See 'pvs --segments -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# pvsegs_sort = "pv_name,pvseg_start"
-
-	# Configuration option report/pvsegs_cols.
-	# List of columns to sort by when reporting 'pvs --segments' command.
-	# See 'pvs --segments -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# pvsegs_cols = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size"
-
-	# Configuration option report/pvsegs_cols_verbose.
-	# List of columns to sort by when reporting 'pvs --segments' command in verbose mode.
-	# See 'pvs --segments -o help' for the list of possible fields.
-	# This configuration option has an automatic default value.
-	# pvsegs_cols_verbose = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size,lv_name,seg_start_pe,segtype,seg_pe_ranges"
+        # Configuration option report/compact_output.
+        # Do not print empty values for all report fields.
+        # If enabled, all fields that don't have a value set for any of the
+        # rows reported are skipped and not printed. Compact output is
+        # applicable only if report/buffered is enabled. If you need to
+        # compact only specified fields, use compact_output=0 and define
+        # report/compact_output_cols configuration setting instead.
+        # This configuration option has an automatic default value.
+        # compact_output = 0
+
+        # Configuration option report/compact_output_cols.
+        # Do not print empty values for specified report fields.
+        # If defined, specified fields that don't have a value set for any
+        # of the rows reported are skipped and not printed. Compact output
+        # is applicable only if report/buffered is enabled. If you need to
+        # compact all fields, use compact_output=1 instead in which case
+        # the compact_output_cols setting is then ignored.
+        # This configuration option has an automatic default value.
+        # compact_output_cols = ""
+
+        # Configuration option report/aligned.
+        # Align columns in report output.
+        # This configuration option has an automatic default value.
+        # aligned = 1
+
+        # Configuration option report/buffered.
+        # Buffer report output.
+        # When buffered reporting is used, the report's content is appended
+        # incrementally to include each object being reported until the report
+        # is flushed to output which normally happens at the end of command
+        # execution. Otherwise, if buffering is not used, each object is
+        # reported as soon as its processing is finished.
+        # This configuration option has an automatic default value.
+        # buffered = 1
+
+        # Configuration option report/headings.
+        # Show headings for columns on report.
+        # This configuration option has an automatic default value.
+        # headings = 1
+
+        # Configuration option report/separator.
+        # A separator to use on report after each field.
+        # This configuration option has an automatic default value.
+        # separator = " "
+
+        # Configuration option report/list_item_separator.
+        # A separator to use for list items when reported.
+        # This configuration option has an automatic default value.
+        # list_item_separator = ","
+
+        # Configuration option report/prefixes.
+        # Use a field name prefix for each field reported.
+        # This configuration option has an automatic default value.
+        # prefixes = 0
+
+        # Configuration option report/quoted.
+        # Quote field values when using field name prefixes.
+        # This configuration option has an automatic default value.
+        # quoted = 1
+
+        # Configuration option report/colums_as_rows.
+        # Output each column as a row.
+        # If set, this also implies report/prefixes=1.
+        # This configuration option has an automatic default value.
+        # colums_as_rows = 0
+
+        # Configuration option report/binary_values_as_numeric.
+        # Use binary values 0 or 1 instead of descriptive literal values.
+        # For columns that have exactly two valid values to report
+        # (not counting the 'unknown' value which denotes that the
+        # value could not be determined).
+        # This configuration option has an automatic default value.
+        # binary_values_as_numeric = 0
+
+        # Configuration option report/time_format.
+        # Set time format for fields reporting time values.
+        # Format specification is a string which may contain special character
+        # sequences and ordinary character sequences. Ordinary character
+        # sequences are copied verbatim. Each special character sequence is
+        # introduced by the '%' character and such sequence is then
+        # substituted with a value as described below.
+        # 
+        # Accepted values:
+        #   %a
+        #     The abbreviated name of the day of the week according to the
+        #     current locale.
+        #   %A
+        #     The full name of the day of the week according to the current
+        #     locale.
+        #   %b
+        #     The abbreviated month name according to the current locale.
+        #   %B
+        #     The full month name according to the current locale.
+        #   %c
+        #     The preferred date and time representation for the current
+        #     locale (alt E)
+        #   %C
+        #     The century number (year/100) as a 2-digit integer. (alt E)
+        #   %d
+        #     The day of the month as a decimal number (range 01 to 31).
+        #     (alt O)
+        #   %D
+        #     Equivalent to %m/%d/%y. (For Americans only. Americans should
+        #     note that in other countries%d/%m/%y is rather common. This
+        #     means that in international context this format is ambiguous and
+        #     should not be used.
+        #   %e
+        #     Like %d, the day of the month as a decimal number, but a leading
+        #     zero is replaced by a space. (alt O)
+        #   %E
+        #     Modifier: use alternative local-dependent representation if
+        #     available.
+        #   %F
+        #     Equivalent to %Y-%m-%d (the ISO 8601 date format).
+        #   %G
+        #     The ISO 8601 week-based year with century as adecimal number.
+        #     The 4-digit year corresponding to the ISO week number (see %V).
+        #     This has the same format and value as %Y, except that if the
+        #     ISO week number belongs to the previous or next year, that year
+        #     is used instead.
+        #   %g
+        #     Like %G, but without century, that is, with a 2-digit year
+        #     (00-99).
+        #   %h
+        #     Equivalent to %b.
+        #   %H
+        #     The hour as a decimal number using a 24-hour clock
+        #     (range 00 to 23). (alt O)
+        #   %I
+        #     The hour as a decimal number using a 12-hour clock
+        #     (range 01 to 12). (alt O)
+        #   %j
+        #     The day of the year as a decimal number (range 001 to 366).
+        #   %k
+        #     The hour (24-hour clock) as a decimal number (range 0 to 23);
+        #     single digits are preceded by a blank. (See also %H.)
+        #   %l
+        #     The hour (12-hour clock) as a decimal number (range 1 to 12);
+        #     single digits are preceded by a blank. (See also %I.)
+        #   %m
+        #     The month as a decimal number (range 01 to 12). (alt O)
+        #   %M
+        #     The minute as a decimal number (range 00 to 59). (alt O)
+        #   %O
+        #     Modifier: use alternative numeric symbols.
+        #   %p
+        #     Either "AM" or "PM" according to the given time value,
+        #     or the corresponding strings for the current locale. Noon is
+        #     treated as "PM" and midnight as "AM".
+        #   %P
+        #     Like %p but in lowercase: "am" or "pm" or a corresponding
+        #     string for the current locale.
+        #   %r
+        #     The time in a.m. or p.m. notation. In the POSIX locale this is
+        #     equivalent to %I:%M:%S %p.
+        #   %R
+        #     The time in 24-hour notation (%H:%M). For a version including
+        #     the seconds, see %T below.
+        #   %s
+        #     The number of seconds since the Epoch,
+        #     1970-01-01 00:00:00 +0000 (UTC)
+        #   %S
+        #     The second as a decimal number (range 00 to 60). (The range is
+        #     up to 60 to allow for occasional leap seconds.) (alt O)
+        #   %t
+        #     A tab character.
+        #   %T
+        #     The time in 24-hour notation (%H:%M:%S).
+        #   %u
+        #     The day of the week as a decimal, range 1 to 7, Monday being 1.
+        #     See also %w. (alt O)
+        #   %U
+        #     The week number of the current year as a decimal number,
+        #     range 00 to 53, starting with the first Sunday as the first
+        #     day of week 01. See also %V and %W. (alt O)
+        #   %V
+        #     The ISO 8601 week number of the current year as a decimal number,
+        #     range 01 to 53, where week 1 is the first week that has at least
+        #     4 days in the new year. See also %U and %W. (alt O)
+        #   %w
+        #     The day of the week as a decimal, range 0 to 6, Sunday being 0.
+        #     See also %u. (alt O)
+        #   %W
+        #     The week number of the current year as a decimal number,
+        #     range 00 to 53, starting with the first Monday as the first day
+        #     of week 01. (alt O)
+        #   %x
+        #     The preferred date representation for the current locale without
+        #     the time. (alt E)
+        #   %X
+        #     The preferred time representation for the current locale without
+        #     the date. (alt E)
+        #   %y
+        #     The year as a decimal number without a century (range 00 to 99).
+        #     (alt E, alt O)
+        #   %Y
+        #     The year as a decimal number including the century. (alt E)
+        #   %z
+        #     The +hhmm or -hhmm numeric timezone (that is, the hour and minute
+        #     offset from UTC).
+        #   %Z
+        #     The timezone name or abbreviation.
+        #   %%
+        #     A literal '%' character.
+        # 
+        # This configuration option has an automatic default value.
+        # time_format = "%Y-%m-%d %T %z"
+
+        # Configuration option report/devtypes_sort.
+        # List of columns to sort by when reporting 'lvm devtypes' command.
+        # See 'lvm devtypes -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # devtypes_sort = "devtype_name"
+
+        # Configuration option report/devtypes_cols.
+        # List of columns to report for 'lvm devtypes' command.
+        # See 'lvm devtypes -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # devtypes_cols = "devtype_name,devtype_max_partitions,devtype_description"
+
+        # Configuration option report/devtypes_cols_verbose.
+        # List of columns to report for 'lvm devtypes' command in verbose mode.
+        # See 'lvm devtypes -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # devtypes_cols_verbose = "devtype_name,devtype_max_partitions,devtype_description"
+
+        # Configuration option report/lvs_sort.
+        # List of columns to sort by when reporting 'lvs' command.
+        # See 'lvs -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # lvs_sort = "vg_name,lv_name"
+
+        # Configuration option report/lvs_cols.
+        # List of columns to report for 'lvs' command.
+        # See 'lvs -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # lvs_cols = "lv_name,vg_name,lv_attr,lv_size,pool_lv,origin,data_percent,metadata_percent,move_pv,mirror_log,copy_percent,convert_lv"
+
+        # Configuration option report/lvs_cols_verbose.
+        # List of columns to report for 'lvs' command in verbose mode.
+        # See 'lvs -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # lvs_cols_verbose = "lv_name,vg_name,seg_count,lv_attr,lv_size,lv_major,lv_minor,lv_kernel_major,lv_kernel_minor,pool_lv,origin,data_percent,metadata_percent,move_pv,copy_percent,mirror_log,convert_lv,lv_uuid,lv_profile"
+
+        # Configuration option report/vgs_sort.
+        # List of columns to sort by when reporting 'vgs' command.
+        # See 'vgs -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # vgs_sort = "vg_name"
+
+        # Configuration option report/vgs_cols.
+        # List of columns to report for 'vgs' command.
+        # See 'vgs -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # vgs_cols = "vg_name,pv_count,lv_count,snap_count,vg_attr,vg_size,vg_free"
+
+        # Configuration option report/vgs_cols_verbose.
+        # List of columns to report for 'vgs' command in verbose mode.
+        # See 'vgs -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # vgs_cols_verbose = "vg_name,vg_attr,vg_extent_size,pv_count,lv_count,snap_count,vg_size,vg_free,vg_uuid,vg_profile"
+
+        # Configuration option report/pvs_sort.
+        # List of columns to sort by when reporting 'pvs' command.
+        # See 'pvs -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # pvs_sort = "pv_name"
+
+        # Configuration option report/pvs_cols.
+        # List of columns to report for 'pvs' command.
+        # See 'pvs -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # pvs_cols = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free"
+
+        # Configuration option report/pvs_cols_verbose.
+        # List of columns to report for 'pvs' command in verbose mode.
+        # See 'pvs -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # pvs_cols_verbose = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,dev_size,pv_uuid"
+
+        # Configuration option report/segs_sort.
+        # List of columns to sort by when reporting 'lvs --segments' command.
+        # See 'lvs --segments -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # segs_sort = "vg_name,lv_name,seg_start"
+
+        # Configuration option report/segs_cols.
+        # List of columns to report for 'lvs --segments' command.
+        # See 'lvs --segments -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # segs_cols = "lv_name,vg_name,lv_attr,stripes,segtype,seg_size"
+
+        # Configuration option report/segs_cols_verbose.
+        # List of columns to report for 'lvs --segments' command in verbose mode.
+        # See 'lvs --segments -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # segs_cols_verbose = "lv_name,vg_name,lv_attr,seg_start,seg_size,stripes,segtype,stripesize,chunksize"
+
+        # Configuration option report/pvsegs_sort.
+        # List of columns to sort by when reporting 'pvs --segments' command.
+        # See 'pvs --segments -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # pvsegs_sort = "pv_name,pvseg_start"
+
+        # Configuration option report/pvsegs_cols.
+        # List of columns to sort by when reporting 'pvs --segments' command.
+        # See 'pvs --segments -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # pvsegs_cols = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size"
+
+        # Configuration option report/pvsegs_cols_verbose.
+        # List of columns to sort by when reporting 'pvs --segments' command in verbose mode.
+        # See 'pvs --segments -o help' for the list of possible fields.
+        # This configuration option has an automatic default value.
+        # pvsegs_cols_verbose = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size,lv_name,seg_start_pe,segtype,seg_pe_ranges"
 # }
 
 # Configuration section dmeventd.
 # Settings for the LVM event daemon.
 dmeventd {
 
-	# Configuration option dmeventd/mirror_library.
-	# The library dmeventd uses when monitoring a mirror device.
-	# libdevmapper-event-lvm2mirror.so attempts to recover from
-	# failures. It removes failed devices from a volume group and
-	# reconfigures a mirror as necessary. If no mirror library is
-	# provided, mirrors are not monitored through dmeventd.
-	mirror_library = "libdevmapper-event-lvm2mirror.so"
-
-	# Configuration option dmeventd/raid_library.
-	# This configuration option has an automatic default value.
-	# raid_library = "libdevmapper-event-lvm2raid.so"
-
-	# Configuration option dmeventd/snapshot_library.
-	# The library dmeventd uses when monitoring a snapshot device.
-	# libdevmapper-event-lvm2snapshot.so monitors the filling of snapshots
-	# and emits a warning through syslog when the usage exceeds 80%. The
-	# warning is repeated when 85%, 90% and 95% of the snapshot is filled.
-	snapshot_library = "libdevmapper-event-lvm2snapshot.so"
-
-	# Configuration option dmeventd/thin_library.
-	# The library dmeventd uses when monitoring a thin device.
-	# libdevmapper-event-lvm2thin.so monitors the filling of a pool
-	# and emits a warning through syslog when the usage exceeds 80%. The
-	# warning is repeated when 85%, 90% and 95% of the pool is filled.
-	thin_library = "libdevmapper-event-lvm2thin.so"
-
-	# Configuration option dmeventd/executable.
-	# The full path to the dmeventd binary.
-	# This configuration option has an automatic default value.
-	# executable = "/sbin/dmeventd"
+        # Configuration option dmeventd/mirror_library.
+        # The library dmeventd uses when monitoring a mirror device.
+        # libdevmapper-event-lvm2mirror.so attempts to recover from
+        # failures. It removes failed devices from a volume group and
+        # reconfigures a mirror as necessary. If no mirror library is
+        # provided, mirrors are not monitored through dmeventd.
+        mirror_library = "libdevmapper-event-lvm2mirror.so"
+
+        # Configuration option dmeventd/raid_library.
+        # This configuration option has an automatic default value.
+        # raid_library = "libdevmapper-event-lvm2raid.so"
+
+        # Configuration option dmeventd/snapshot_library.
+        # The library dmeventd uses when monitoring a snapshot device.
+        # libdevmapper-event-lvm2snapshot.so monitors the filling of snapshots
+        # and emits a warning through syslog when the usage exceeds 80%. The
+        # warning is repeated when 85%, 90% and 95% of the snapshot is filled.
+        snapshot_library = "libdevmapper-event-lvm2snapshot.so"
+
+        # Configuration option dmeventd/thin_library.
+        # The library dmeventd uses when monitoring a thin device.
+        # libdevmapper-event-lvm2thin.so monitors the filling of a pool
+        # and emits a warning through syslog when the usage exceeds 80%. The
+        # warning is repeated when 85%, 90% and 95% of the pool is filled.
+        thin_library = "libdevmapper-event-lvm2thin.so"
+
+        # Configuration option dmeventd/executable.
+        # The full path to the dmeventd binary.
+        # This configuration option has an automatic default value.
+        # executable = "/sbin/dmeventd"
 }
 
 # Configuration section tags.
@@ -1851,37 +1855,37 @@
 # This configuration section has an automatic default value.
 # tags {
 
-	# Configuration option tags/hosttags.
-	# Create a host tag using the machine name.
-	# The machine name is nodename returned by uname(2).
-	# This configuration option has an automatic default value.
-	# hosttags = 0
-
-	# Configuration section tags/<tag>.
-	# Replace this subsection name with a custom tag name.
-	# Multiple subsections like this can be created. The '@' prefix for
-	# tags is optional. This subsection can contain host_list, which is a
-	# list of machine names. If the name of the local machine is found in
-	# host_list, then the name of this subsection is used as a tag and is
-	# applied to the local machine as a 'host tag'. If this subsection is
-	# empty (has no host_list), then the subsection name is always applied
-	# as a 'host tag'.
-	# 
-	# Example
-	# The host tag foo is given to all hosts, and the host tag
-	# bar is given to the hosts named machine1 and machine2.
-	# tags { foo { } bar { host_list = [ "machine1", "machine2" ] } }
-	# 
-	# This configuration section has variable name.
-	# This configuration section has an automatic default value.
-	# tag {
-
-		# Configuration option tags/<tag>/host_list.
-		# A list of machine names.
-		# These machine names are compared to the nodename returned
-		# by uname(2). If the local machine name matches an entry in
-		# this list, the name of the subsection is applied to the
-		# machine as a 'host tag'.
-		# This configuration option does not have a default value defined.
-	# }
+        # Configuration option tags/hosttags.
+        # Create a host tag using the machine name.
+        # The machine name is nodename returned by uname(2).
+        # This configuration option has an automatic default value.
+        # hosttags = 0
+
+        # Configuration section tags/<tag>.
+        # Replace this subsection name with a custom tag name.
+        # Multiple subsections like this can be created. The '@' prefix for
+        # tags is optional. This subsection can contain host_list, which is a
+        # list of machine names. If the name of the local machine is found in
+        # host_list, then the name of this subsection is used as a tag and is
+        # applied to the local machine as a 'host tag'. If this subsection is
+        # empty (has no host_list), then the subsection name is always applied
+        # as a 'host tag'.
+        # 
+        # Example
+        # The host tag foo is given to all hosts, and the host tag
+        # bar is given to the hosts named machine1 and machine2.
+        # tags { foo { } bar { host_list = [ "machine1", "machine2" ] } }
+        # 
+        # This configuration section has variable name.
+        # This configuration section has an automatic default value.
+        # tag {
+
+                # Configuration option tags/<tag>/host_list.
+                # A list of machine names.
+                # These machine names are compared to the nodename returned
+                # by uname(2). If the local machine name matches an entry in
+                # this list, the name of the subsection is applied to the
+                # machine as a 'host tag'.
+                # This configuration option does not have a default value defined.
+        # }
 # }

2018-09-29 13:57:26,742 [salt.state       :1941][INFO    ][3918] Completed state [/etc/lvm/lvm.conf] at time 13:57:26.742202 duration_in_ms=142.991
2018-09-29 13:57:26,744 [salt.state       :1770][INFO    ][3918] Running state [lvm2-lvmetad] at time 13:57:26.744845
2018-09-29 13:57:26,745 [salt.state       :1803][INFO    ][3918] Executing state service.running for [lvm2-lvmetad]
2018-09-29 13:57:26,745 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'status', 'lvm2-lvmetad.service', '-n', '0'] in directory '/root'
2018-09-29 13:57:26,753 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-active', 'lvm2-lvmetad.service'] in directory '/root'
2018-09-29 13:57:26,760 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-enabled', 'lvm2-lvmetad.service'] in directory '/root'
2018-09-29 13:57:26,770 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-enabled', 'lvm2-lvmetad.service'] in directory '/root'
2018-09-29 13:57:26,783 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'lvm2-lvmetad.service'] in directory '/root'
2018-09-29 13:57:27,032 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-enabled', 'lvm2-lvmetad.service'] in directory '/root'
2018-09-29 13:57:27,038 [salt.state       :290 ][INFO    ][3918] {'lvm2-lvmetad': True}
2018-09-29 13:57:27,039 [salt.state       :1941][INFO    ][3918] Completed state [lvm2-lvmetad] at time 13:57:27.039072 duration_in_ms=294.227
2018-09-29 13:57:27,041 [salt.state       :1770][INFO    ][3918] Running state [lvm2-lvmpolld] at time 13:57:27.041728
2018-09-29 13:57:27,042 [salt.state       :1803][INFO    ][3918] Executing state service.running for [lvm2-lvmpolld]
2018-09-29 13:57:27,042 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'status', 'lvm2-lvmpolld.service', '-n', '0'] in directory '/root'
2018-09-29 13:57:27,050 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-active', 'lvm2-lvmpolld.service'] in directory '/root'
2018-09-29 13:57:27,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-enabled', 'lvm2-lvmpolld.service'] in directory '/root'
2018-09-29 13:57:27,065 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'lvm2-lvmpolld.service'] in directory '/root'
2018-09-29 13:57:27,109 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-active', 'lvm2-lvmpolld.service'] in directory '/root'
2018-09-29 13:57:27,116 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-enabled', 'lvm2-lvmpolld.service'] in directory '/root'
2018-09-29 13:57:27,125 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-enabled', 'lvm2-lvmpolld.service'] in directory '/root'
2018-09-29 13:57:27,136 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'lvm2-lvmpolld.service'] in directory '/root'
2018-09-29 13:57:27,327 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-enabled', 'lvm2-lvmpolld.service'] in directory '/root'
2018-09-29 13:57:27,334 [salt.state       :290 ][INFO    ][3918] {'lvm2-lvmpolld': True}
2018-09-29 13:57:27,334 [salt.state       :1941][INFO    ][3918] Completed state [lvm2-lvmpolld] at time 13:57:27.334765 duration_in_ms=293.037
2018-09-29 13:57:27,337 [salt.state       :1770][INFO    ][3918] Running state [lvm2-monitor] at time 13:57:27.337557
2018-09-29 13:57:27,337 [salt.state       :1803][INFO    ][3918] Executing state service.running for [lvm2-monitor]
2018-09-29 13:57:27,338 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'status', 'lvm2-monitor.service', '-n', '0'] in directory '/root'
2018-09-29 13:57:27,344 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-active', 'lvm2-monitor.service'] in directory '/root'
2018-09-29 13:57:27,350 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-enabled', 'lvm2-monitor.service'] in directory '/root'
2018-09-29 13:57:27,357 [salt.state       :290 ][INFO    ][3918] The service lvm2-monitor is already running
2018-09-29 13:57:27,357 [salt.state       :1941][INFO    ][3918] Completed state [lvm2-monitor] at time 13:57:27.357295 duration_in_ms=19.738
2018-09-29 13:57:27,357 [salt.state       :1770][INFO    ][3918] Running state [lvm2-monitor] at time 13:57:27.357486
2018-09-29 13:57:27,357 [salt.state       :1803][INFO    ][3918] Executing state service.mod_watch for [lvm2-monitor]
2018-09-29 13:57:27,358 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-active', 'lvm2-monitor.service'] in directory '/root'
2018-09-29 13:57:27,365 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'lvm2-monitor.service'] in directory '/root'
2018-09-29 13:57:27,409 [salt.state       :290 ][INFO    ][3918] {'lvm2-monitor': True}
2018-09-29 13:57:27,410 [salt.state       :1941][INFO    ][3918] Completed state [lvm2-monitor] at time 13:57:27.409964 duration_in_ms=52.477
2018-09-29 13:57:27,414 [salt.state       :1770][INFO    ][3918] Running state [/dev/sda1] at time 13:57:27.413966
2018-09-29 13:57:27,414 [salt.state       :1803][INFO    ][3918] Executing state lvm.pv_present for [/dev/sda1]
2018-09-29 13:57:27,414 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['pvdisplay', '-c', '/dev/sda1'] in directory '/root'
2018-09-29 13:57:27,425 [salt.state       :290 ][INFO    ][3918] Physical Volume /dev/sda1 already present
2018-09-29 13:57:27,426 [salt.state       :1941][INFO    ][3918] Completed state [/dev/sda1] at time 13:57:27.426221 duration_in_ms=12.254
2018-09-29 13:57:27,427 [salt.state       :1770][INFO    ][3918] Running state [vgroot] at time 13:57:27.427946
2018-09-29 13:57:27,428 [salt.state       :1803][INFO    ][3918] Executing state lvm.vg_present for [vgroot]
2018-09-29 13:57:27,428 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['vgdisplay', '-c', 'vgroot'] in directory '/root'
2018-09-29 13:57:27,436 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['pvdisplay', '-c', '/dev/sda1'] in directory '/root'
2018-09-29 13:57:27,445 [salt.state       :290 ][INFO    ][3918] Volume Group vgroot already present
/dev/sda1 is part of Volume Group
2018-09-29 13:57:27,445 [salt.state       :1941][INFO    ][3918] Completed state [vgroot] at time 13:57:27.445776 duration_in_ms=17.83
2018-09-29 13:57:27,446 [salt.state       :1770][INFO    ][3918] Running state [ntp] at time 13:57:27.446014
2018-09-29 13:57:27,446 [salt.state       :1803][INFO    ][3918] Executing state pkg.installed for [ntp]
2018-09-29 13:57:27,453 [salt.state       :290 ][INFO    ][3918] All specified packages are already installed
2018-09-29 13:57:27,453 [salt.state       :1941][INFO    ][3918] Completed state [ntp] at time 13:57:27.453574 duration_in_ms=7.559
2018-09-29 13:57:27,455 [salt.state       :1770][INFO    ][3918] Running state [/etc/ntp.conf] at time 13:57:27.455194
2018-09-29 13:57:27,455 [salt.state       :1803][INFO    ][3918] Executing state file.managed for [/etc/ntp.conf]
2018-09-29 13:57:27,473 [salt.fileclient  :1215][INFO    ][3918] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-09-29 13:57:27,528 [salt.state       :290 ][INFO    ][3918] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
 
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
+# ntpd will only synchronize your clock.
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# Associate to cloud NTP pool servers
+server 1.pool.ntp.org iburst
+server 0.pool.ntp.org
 
-# Specify one or more NTP servers.
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-# pools
-pool ntp.ubuntu.com iburst
-
-# Use Ubuntu's ntp server as a fallback.
-# pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
-
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-09-29 13:57:27,528 [salt.state       :1941][INFO    ][3918] Completed state [/etc/ntp.conf] at time 13:57:27.528793 duration_in_ms=73.6
2018-09-29 13:57:27,530 [salt.state       :1770][INFO    ][3918] Running state [ntp] at time 13:57:27.530367
2018-09-29 13:57:27,530 [salt.state       :1803][INFO    ][3918] Executing state service.running for [ntp]
2018-09-29 13:57:27,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-09-29 13:57:27,537 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-09-29 13:57:27,543 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-09-29 13:57:27,551 [salt.state       :290 ][INFO    ][3918] The service ntp is already running
2018-09-29 13:57:27,552 [salt.state       :1941][INFO    ][3918] Completed state [ntp] at time 13:57:27.552017 duration_in_ms=21.649
2018-09-29 13:57:27,552 [salt.state       :1770][INFO    ][3918] Running state [ntp] at time 13:57:27.552216
2018-09-29 13:57:27,552 [salt.state       :1803][INFO    ][3918] Executing state service.mod_watch for [ntp]
2018-09-29 13:57:27,552 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-09-29 13:57:27,558 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3918] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-09-29 13:57:27,597 [salt.state       :290 ][INFO    ][3918] {'ntp': True}
2018-09-29 13:57:27,598 [salt.state       :1941][INFO    ][3918] Completed state [ntp] at time 13:57:27.598104 duration_in_ms=45.887
2018-09-29 13:57:27,602 [salt.minion      :1708][INFO    ][3918] Returning information for job: 20180929135711543357
2018-09-29 13:57:30,796 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command pkg.upgrade with jid 20180929135730782647
2018-09-29 13:57:30,804 [salt.minion      :1431][INFO    ][4983] Starting a new job with PID 4983
2018-09-29 13:57:30,817 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][4983] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 13:57:31,080 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][4983] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'upgrade'] in directory '/root'
2018-09-29 13:57:36,023 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][4983] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 13:57:36,049 [salt.minion      :1708][INFO    ][4983] Returning information for job: 20180929135730782647
2018-09-29 13:58:34,518 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command state.apply with jid 20180929135834474866
2018-09-29 13:58:34,526 [salt.minion      :1431][INFO    ][5829] Starting a new job with PID 5829
2018-09-29 13:58:37,387 [salt.state       :905 ][INFO    ][5829] Loading fresh modules for state activity
2018-09-29 13:58:37,430 [salt.fileclient  :1215][INFO    ][5829] Fetching file from saltenv 'base', ** done ** 'salt/init.sls'
2018-09-29 13:58:37,735 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l ceilometer-agent-compute | grep ceilometer-agent-compute | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:37,752 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l ceilometer-agent-compute | grep ceilometer-agent-compute | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:37,967 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l nova-common | grep nova-common | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:37,980 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l nova-compute-kvm | grep nova-compute-kvm | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:37,993 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-novaclient | grep python-novaclient | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,006 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l pm-utils | grep pm-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,018 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sysfsutils | grep sysfsutils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,030 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sg3-utils | grep sg3-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,042 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-memcache | grep python-memcache | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,054 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-guestfs | grep python-guestfs | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l gettext-base | grep gettext-base | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,148 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l nova-common | grep nova-common | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,159 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l nova-compute-kvm | grep nova-compute-kvm | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,171 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-novaclient | grep python-novaclient | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,183 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l pm-utils | grep pm-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,195 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sysfsutils | grep sysfsutils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sg3-utils | grep sg3-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,219 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-memcache | grep python-memcache | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-guestfs | grep python-guestfs | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,243 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l gettext-base | grep gettext-base | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l cinder-volume | grep cinder-volume | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,359 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l lvm2 | grep lvm2 | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,371 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sysfsutils | grep sysfsutils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,382 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sg3-utils | grep sg3-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,394 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-cinder | grep python-cinder | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,405 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-mysqldb | grep python-mysqldb | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,417 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l p7zip | grep p7zip | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,428 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l gettext-base | grep gettext-base | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,439 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-memcache | grep python-memcache | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,451 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-pycadf | grep python-pycadf | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,468 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l cinder-volume | grep cinder-volume | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,479 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l lvm2 | grep lvm2 | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sysfsutils | grep sysfsutils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,502 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sg3-utils | grep sg3-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,516 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-cinder | grep python-cinder | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,529 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-mysqldb | grep python-mysqldb | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,541 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l p7zip | grep p7zip | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l gettext-base | grep gettext-base | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,565 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-memcache | grep python-memcache | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,577 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-pycadf | grep python-pycadf | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:38,619 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'salt-minion --version' in directory '/root'
2018-09-29 13:58:38,783 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'salt-minion --version' in directory '/root'
2018-09-29 13:58:39,523 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l ceilometer-agent-compute | grep ceilometer-agent-compute | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,539 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l ceilometer-agent-compute | grep ceilometer-agent-compute | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,753 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l nova-common | grep nova-common | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l nova-compute-kvm | grep nova-compute-kvm | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,777 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-novaclient | grep python-novaclient | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l pm-utils | grep pm-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,801 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sysfsutils | grep sysfsutils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,812 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sg3-utils | grep sg3-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,825 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-memcache | grep python-memcache | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,837 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-guestfs | grep python-guestfs | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,849 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l gettext-base | grep gettext-base | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,935 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l nova-common | grep nova-common | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,947 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l nova-compute-kvm | grep nova-compute-kvm | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,959 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-novaclient | grep python-novaclient | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,971 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l pm-utils | grep pm-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,983 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sysfsutils | grep sysfsutils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:39,994 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sg3-utils | grep sg3-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-memcache | grep python-memcache | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,017 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-guestfs | grep python-guestfs | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,028 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l gettext-base | grep gettext-base | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l cinder-volume | grep cinder-volume | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,147 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l lvm2 | grep lvm2 | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,159 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sysfsutils | grep sysfsutils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,171 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sg3-utils | grep sg3-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,184 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-cinder | grep python-cinder | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,195 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-mysqldb | grep python-mysqldb | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l p7zip | grep p7zip | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,219 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l gettext-base | grep gettext-base | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-memcache | grep python-memcache | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,242 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-pycadf | grep python-pycadf | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,259 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l cinder-volume | grep cinder-volume | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,271 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l lvm2 | grep lvm2 | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,283 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sysfsutils | grep sysfsutils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,294 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l sg3-utils | grep sg3-utils | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,306 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-cinder | grep python-cinder | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,318 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-mysqldb | grep python-mysqldb | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,330 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l p7zip | grep p7zip | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,342 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l gettext-base | grep gettext-base | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-memcache | grep python-memcache | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,365 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'dpkg -l python-pycadf | grep python-pycadf | awk '{print $3}'' in directory '/root'
2018-09-29 13:58:40,408 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'salt-minion --version' in directory '/root'
2018-09-29 13:58:40,582 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'salt-minion --version' in directory '/root'
2018-09-29 13:58:41,628 [salt.state       :1770][INFO    ][5829] Running state [salt-minion] at time 13:58:41.628151
2018-09-29 13:58:41,628 [salt.state       :1803][INFO    ][5829] Executing state pkg.installed for [salt-minion]
2018-09-29 13:58:41,628 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 13:58:41,888 [salt.state       :290 ][INFO    ][5829] All specified packages are already installed
2018-09-29 13:58:41,889 [salt.state       :1941][INFO    ][5829] Completed state [salt-minion] at time 13:58:41.888955 duration_in_ms=260.805
2018-09-29 13:58:41,889 [salt.state       :1770][INFO    ][5829] Running state [salt_minion_dependency_packages] at time 13:58:41.889227
2018-09-29 13:58:41,889 [salt.state       :1803][INFO    ][5829] Executing state pkg.installed for [salt_minion_dependency_packages]
2018-09-29 13:58:41,896 [salt.state       :290 ][INFO    ][5829] All specified packages are already installed
2018-09-29 13:58:41,896 [salt.state       :1941][INFO    ][5829] Completed state [salt_minion_dependency_packages] at time 13:58:41.896182 duration_in_ms=6.955
2018-09-29 13:58:41,898 [salt.state       :1770][INFO    ][5829] Running state [/etc/salt/minion.d/minion.conf] at time 13:58:41.898357
2018-09-29 13:58:41,898 [salt.state       :1803][INFO    ][5829] Executing state file.managed for [/etc/salt/minion.d/minion.conf]
2018-09-29 13:58:42,097 [salt.state       :290 ][INFO    ][5829] File /etc/salt/minion.d/minion.conf is in the correct state
2018-09-29 13:58:42,097 [salt.state       :1941][INFO    ][5829] Completed state [/etc/salt/minion.d/minion.conf] at time 13:58:42.097269 duration_in_ms=198.912
2018-09-29 13:58:42,097 [salt.state       :1770][INFO    ][5829] Running state [python-netaddr] at time 13:58:42.097489
2018-09-29 13:58:42,097 [salt.state       :1803][INFO    ][5829] Executing state pkg.installed for [python-netaddr]
2018-09-29 13:58:42,104 [salt.state       :290 ][INFO    ][5829] All specified packages are already installed
2018-09-29 13:58:42,104 [salt.state       :1941][INFO    ][5829] Completed state [python-netaddr] at time 13:58:42.104152 duration_in_ms=6.663
2018-09-29 13:58:42,105 [salt.state       :1770][INFO    ][5829] Running state [salt-minion] at time 13:58:42.105163
2018-09-29 13:58:42,105 [salt.state       :1803][INFO    ][5829] Executing state service.running for [salt-minion]
2018-09-29 13:58:42,105 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-09-29 13:58:42,117 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command ['systemctl', 'is-active', 'salt-minion.service'] in directory '/root'
2018-09-29 13:58:42,123 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command ['systemctl', 'is-enabled', 'salt-minion.service'] in directory '/root'
2018-09-29 13:58:42,129 [salt.state       :290 ][INFO    ][5829] The service salt-minion is already running
2018-09-29 13:58:42,129 [salt.state       :1941][INFO    ][5829] Completed state [salt-minion] at time 13:58:42.129816 duration_in_ms=24.653
2018-09-29 13:58:42,131 [salt.state       :1770][INFO    ][5829] Running state [/etc/salt/grains.d] at time 13:58:42.131217
2018-09-29 13:58:42,131 [salt.state       :1803][INFO    ][5829] Executing state file.directory for [/etc/salt/grains.d]
2018-09-29 13:58:42,132 [salt.state       :290 ][INFO    ][5829] Directory /etc/salt/grains.d is in the correct state
Directory /etc/salt/grains.d updated
2018-09-29 13:58:42,132 [salt.state       :1941][INFO    ][5829] Completed state [/etc/salt/grains.d] at time 13:58:42.132236 duration_in_ms=1.019
2018-09-29 13:58:42,132 [salt.state       :1770][INFO    ][5829] Running state [/etc/salt/grains] at time 13:58:42.132724
2018-09-29 13:58:42,132 [salt.state       :1803][INFO    ][5829] Executing state file.managed for [/etc/salt/grains]
2018-09-29 13:58:42,133 [salt.state       :290 ][INFO    ][5829] File /etc/salt/grains exists with proper permissions. No changes made.
2018-09-29 13:58:42,133 [salt.state       :1941][INFO    ][5829] Completed state [/etc/salt/grains] at time 13:58:42.133463 duration_in_ms=0.739
2018-09-29 13:58:42,133 [salt.state       :1770][INFO    ][5829] Running state [/etc/salt/grains.d/placeholder] at time 13:58:42.133788
2018-09-29 13:58:42,134 [salt.state       :1803][INFO    ][5829] Executing state file.managed for [/etc/salt/grains.d/placeholder]
2018-09-29 13:58:42,134 [salt.state       :290 ][INFO    ][5829] File /etc/salt/grains.d/placeholder exists with proper permissions. No changes made.
2018-09-29 13:58:42,134 [salt.state       :1941][INFO    ][5829] Completed state [/etc/salt/grains.d/placeholder] at time 13:58:42.134798 duration_in_ms=1.01
2018-09-29 13:58:42,135 [salt.state       :1770][INFO    ][5829] Running state [/etc/salt/grains.d/sphinx] at time 13:58:42.135134
2018-09-29 13:58:42,135 [salt.state       :1803][INFO    ][5829] Executing state file.managed for [/etc/salt/grains.d/sphinx]
2018-09-29 13:58:42,137 [salt.state       :290 ][INFO    ][5829] File changed:
--- 
+++ 
@@ -41,7 +41,7 @@
 
                 * lvm2: 2.02.133-1ubuntu10
 
-                * sysfsutils: dpkg-query: no packages found matching sysfsutils
+                * sysfsutils: 2.1.0+repack-4
 
                 * sg3-utils: dpkg-query: no packages found matching sg3-utils
 
@@ -86,7 +86,10 @@
             ip:
               name: IP Addresses
               value:
+              - 100.64.200.111
               - 127.0.0.1
+              - 192.168.2.6
+              - 192.168.10.53
               - 192.168.11.9
         system:
           name: System
@@ -135,7 +138,7 @@
 
                 * pm-utils: dpkg-query: no packages found matching pm-utils
 
-                * sysfsutils: dpkg-query: no packages found matching sysfsutils
+                * sysfsutils: 2.1.0+repack-4
 
                 * sg3-utils: dpkg-query: no packages found matching sg3-utils
 

2018-09-29 13:58:42,137 [salt.state       :1941][INFO    ][5829] Completed state [/etc/salt/grains.d/sphinx] at time 13:58:42.137755 duration_in_ms=2.621
2018-09-29 13:58:42,139 [salt.state       :1770][INFO    ][5829] Running state [python -c "import yaml; stream = file('/etc/salt/grains.d/sphinx', 'r'); yaml.load(stream); stream.close()"] at time 13:58:42.139009
2018-09-29 13:58:42,139 [salt.state       :1803][INFO    ][5829] Executing state cmd.wait for [python -c "import yaml; stream = file('/etc/salt/grains.d/sphinx', 'r'); yaml.load(stream); stream.close()"]
2018-09-29 13:58:42,139 [salt.state       :290 ][INFO    ][5829] No changes made for python -c "import yaml; stream = file('/etc/salt/grains.d/sphinx', 'r'); yaml.load(stream); stream.close()"
2018-09-29 13:58:42,139 [salt.state       :1941][INFO    ][5829] Completed state [python -c "import yaml; stream = file('/etc/salt/grains.d/sphinx', 'r'); yaml.load(stream); stream.close()"] at time 13:58:42.139576 duration_in_ms=0.568
2018-09-29 13:58:42,139 [salt.state       :1770][INFO    ][5829] Running state [python -c "import yaml; stream = file('/etc/salt/grains.d/sphinx', 'r'); yaml.load(stream); stream.close()"] at time 13:58:42.139729
2018-09-29 13:58:42,139 [salt.state       :1803][INFO    ][5829] Executing state cmd.mod_watch for [python -c "import yaml; stream = file('/etc/salt/grains.d/sphinx', 'r'); yaml.load(stream); stream.close()"]
2018-09-29 13:58:42,140 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'python -c "import yaml; stream = file('/etc/salt/grains.d/sphinx', 'r'); yaml.load(stream); stream.close()"' in directory '/root'
2018-09-29 13:58:42,225 [salt.state       :290 ][INFO    ][5829] {'pid': 6197, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-09-29 13:58:42,225 [salt.state       :1941][INFO    ][5829] Completed state [python -c "import yaml; stream = file('/etc/salt/grains.d/sphinx', 'r'); yaml.load(stream); stream.close()"] at time 13:58:42.225501 duration_in_ms=85.771
2018-09-29 13:58:42,226 [salt.state       :1770][INFO    ][5829] Running state [/etc/salt/grains.d/dns_records] at time 13:58:42.226033
2018-09-29 13:58:42,226 [salt.state       :1803][INFO    ][5829] Executing state file.managed for [/etc/salt/grains.d/dns_records]
2018-09-29 13:58:42,227 [salt.state       :290 ][INFO    ][5829] File /etc/salt/grains.d/dns_records is in the correct state
2018-09-29 13:58:42,227 [salt.state       :1941][INFO    ][5829] Completed state [/etc/salt/grains.d/dns_records] at time 13:58:42.227597 duration_in_ms=1.563
2018-09-29 13:58:42,228 [salt.state       :1770][INFO    ][5829] Running state [python -c "import yaml; stream = file('/etc/salt/grains.d/dns_records', 'r'); yaml.load(stream); stream.close()"] at time 13:58:42.228337
2018-09-29 13:58:42,228 [salt.state       :1803][INFO    ][5829] Executing state cmd.wait for [python -c "import yaml; stream = file('/etc/salt/grains.d/dns_records', 'r'); yaml.load(stream); stream.close()"]
2018-09-29 13:58:42,228 [salt.state       :290 ][INFO    ][5829] No changes made for python -c "import yaml; stream = file('/etc/salt/grains.d/dns_records', 'r'); yaml.load(stream); stream.close()"
2018-09-29 13:58:42,229 [salt.state       :1941][INFO    ][5829] Completed state [python -c "import yaml; stream = file('/etc/salt/grains.d/dns_records', 'r'); yaml.load(stream); stream.close()"] at time 13:58:42.229017 duration_in_ms=0.681
2018-09-29 13:58:42,229 [salt.state       :1770][INFO    ][5829] Running state [/etc/salt/grains.d/salt] at time 13:58:42.229338
2018-09-29 13:58:42,229 [salt.state       :1803][INFO    ][5829] Executing state file.managed for [/etc/salt/grains.d/salt]
2018-09-29 13:58:42,230 [salt.state       :290 ][INFO    ][5829] File /etc/salt/grains.d/salt is in the correct state
2018-09-29 13:58:42,230 [salt.state       :1941][INFO    ][5829] Completed state [/etc/salt/grains.d/salt] at time 13:58:42.230585 duration_in_ms=1.247
2018-09-29 13:58:42,231 [salt.state       :1770][INFO    ][5829] Running state [python -c "import yaml; stream = file('/etc/salt/grains.d/salt', 'r'); yaml.load(stream); stream.close()"] at time 13:58:42.231211
2018-09-29 13:58:42,231 [salt.state       :1803][INFO    ][5829] Executing state cmd.wait for [python -c "import yaml; stream = file('/etc/salt/grains.d/salt', 'r'); yaml.load(stream); stream.close()"]
2018-09-29 13:58:42,231 [salt.state       :290 ][INFO    ][5829] No changes made for python -c "import yaml; stream = file('/etc/salt/grains.d/salt', 'r'); yaml.load(stream); stream.close()"
2018-09-29 13:58:42,231 [salt.state       :1941][INFO    ][5829] Completed state [python -c "import yaml; stream = file('/etc/salt/grains.d/salt', 'r'); yaml.load(stream); stream.close()"] at time 13:58:42.231821 duration_in_ms=0.61
2018-09-29 13:58:42,233 [salt.state       :1770][INFO    ][5829] Running state [cat /etc/salt/grains.d/* > /etc/salt/grains] at time 13:58:42.233235
2018-09-29 13:58:42,233 [salt.state       :1803][INFO    ][5829] Executing state cmd.wait for [cat /etc/salt/grains.d/* > /etc/salt/grains]
2018-09-29 13:58:42,233 [salt.state       :290 ][INFO    ][5829] No changes made for cat /etc/salt/grains.d/* > /etc/salt/grains
2018-09-29 13:58:42,233 [salt.state       :1941][INFO    ][5829] Completed state [cat /etc/salt/grains.d/* > /etc/salt/grains] at time 13:58:42.233861 duration_in_ms=0.625
2018-09-29 13:58:42,234 [salt.state       :1770][INFO    ][5829] Running state [cat /etc/salt/grains.d/* > /etc/salt/grains] at time 13:58:42.234017
2018-09-29 13:58:42,234 [salt.state       :1803][INFO    ][5829] Executing state cmd.mod_watch for [cat /etc/salt/grains.d/* > /etc/salt/grains]
2018-09-29 13:58:42,235 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5829] Executing command 'cat /etc/salt/grains.d/* > /etc/salt/grains' in directory '/root'
2018-09-29 13:58:42,241 [salt.state       :290 ][INFO    ][5829] {'pid': 6199, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-09-29 13:58:42,241 [salt.state       :1941][INFO    ][5829] Completed state [cat /etc/salt/grains.d/* > /etc/salt/grains] at time 13:58:42.241735 duration_in_ms=7.718
2018-09-29 13:58:42,242 [salt.state       :1770][INFO    ][5829] Running state [mine.update] at time 13:58:42.242364
2018-09-29 13:58:42,242 [salt.state       :1803][INFO    ][5829] Executing state module.wait for [mine.update]
2018-09-29 13:58:42,242 [salt.state       :290 ][INFO    ][5829] No changes made for mine.update
2018-09-29 13:58:42,243 [salt.state       :1941][INFO    ][5829] Completed state [mine.update] at time 13:58:42.242988 duration_in_ms=0.624
2018-09-29 13:58:42,243 [salt.state       :1770][INFO    ][5829] Running state [mine.update] at time 13:58:42.243146
2018-09-29 13:58:42,243 [salt.state       :1803][INFO    ][5829] Executing state module.mod_watch for [mine.update]
2018-09-29 13:58:42,243 [salt.utils.decorators:613 ][WARNING ][5829] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 13:58:42,758 [salt.state       :290 ][INFO    ][5829] {'ret': True}
2018-09-29 13:58:42,759 [salt.state       :1941][INFO    ][5829] Completed state [mine.update] at time 13:58:42.759125 duration_in_ms=515.979
2018-09-29 13:58:42,759 [salt.state       :1770][INFO    ][5829] Running state [ca-certificates] at time 13:58:42.759375
2018-09-29 13:58:42,759 [salt.state       :1803][INFO    ][5829] Executing state pkg.installed for [ca-certificates]
2018-09-29 13:58:42,767 [salt.state       :290 ][INFO    ][5829] All specified packages are already installed
2018-09-29 13:58:42,767 [salt.state       :1941][INFO    ][5829] Completed state [ca-certificates] at time 13:58:42.767645 duration_in_ms=8.27
2018-09-29 13:58:42,768 [salt.state       :1770][INFO    ][5829] Running state [update-ca-certificates] at time 13:58:42.768235
2018-09-29 13:58:42,768 [salt.state       :1803][INFO    ][5829] Executing state cmd.wait for [update-ca-certificates]
2018-09-29 13:58:42,768 [salt.state       :290 ][INFO    ][5829] No changes made for update-ca-certificates
2018-09-29 13:58:42,768 [salt.state       :1941][INFO    ][5829] Completed state [update-ca-certificates] at time 13:58:42.768852 duration_in_ms=0.617
2018-09-29 13:58:42,770 [salt.minion      :1708][INFO    ][5829] Returning information for job: 20180929135834474866
2018-09-29 14:01:39,617 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.sync_all with jid 20180929140139515571
2018-09-29 14:01:39,625 [salt.minion      :1431][INFO    ][6224] Starting a new job with PID 6224
2018-09-29 14:01:42,091 [salt.state       :905 ][INFO    ][6224] Loading fresh modules for state activity
2018-09-29 14:01:42,130 [salt.utils.extmods:71  ][INFO    ][6224] Creating module dir '/var/cache/salt/minion/extmods/clouds'
2018-09-29 14:01:42,135 [salt.utils.extmods:82  ][INFO    ][6224] Syncing clouds for environment 'base'
2018-09-29 14:01:42,135 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_clouds, for base)
2018-09-29 14:01:42,135 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_clouds/' for environment 'base'
2018-09-29 14:01:42,186 [salt.utils.extmods:71  ][INFO    ][6224] Creating module dir '/var/cache/salt/minion/extmods/beacons'
2018-09-29 14:01:42,190 [salt.utils.extmods:82  ][INFO    ][6224] Syncing beacons for environment 'base'
2018-09-29 14:01:42,190 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_beacons, for base)
2018-09-29 14:01:42,190 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_beacons/' for environment 'base'
2018-09-29 14:01:42,252 [salt.utils.extmods:82  ][INFO    ][6224] Syncing modules for environment 'base'
2018-09-29 14:01:42,252 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_modules, for base)
2018-09-29 14:01:42,252 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_modules/' for environment 'base'
2018-09-29 14:01:43,811 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/architect.py' to '/var/cache/salt/minion/extmods/modules/architect.py'
2018-09-29 14:01:43,812 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/avinetworks.py' to '/var/cache/salt/minion/extmods/modules/avinetworks.py'
2018-09-29 14:01:43,812 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/barbicanv1/__init__.py' to '/var/cache/salt/minion/extmods/modules/barbicanv1/__init__.py'
2018-09-29 14:01:43,813 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/barbicanv1/acl.py' to '/var/cache/salt/minion/extmods/modules/barbicanv1/acl.py'
2018-09-29 14:01:43,814 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/barbicanv1/common.py' to '/var/cache/salt/minion/extmods/modules/barbicanv1/common.py'
2018-09-29 14:01:43,814 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/barbicanv1/secrets.py' to '/var/cache/salt/minion/extmods/modules/barbicanv1/secrets.py'
2018-09-29 14:01:43,815 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/ceph_ng.py' to '/var/cache/salt/minion/extmods/modules/ceph_ng.py'
2018-09-29 14:01:43,815 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/cfgdrive.py' to '/var/cache/salt/minion/extmods/modules/cfgdrive.py'
2018-09-29 14:01:43,816 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/cinderng.py' to '/var/cache/salt/minion/extmods/modules/cinderng.py'
2018-09-29 14:01:43,816 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/cinderv3/__init__.py' to '/var/cache/salt/minion/extmods/modules/cinderv3/__init__.py'
2018-09-29 14:01:43,817 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/cinderv3/common.py' to '/var/cache/salt/minion/extmods/modules/cinderv3/common.py'
2018-09-29 14:01:43,817 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/cinderv3/volume.py' to '/var/cache/salt/minion/extmods/modules/cinderv3/volume.py'
2018-09-29 14:01:43,818 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/contrail.py' to '/var/cache/salt/minion/extmods/modules/contrail.py'
2018-09-29 14:01:43,819 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/creds.py' to '/var/cache/salt/minion/extmods/modules/creds.py'
2018-09-29 14:01:43,819 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/devops_utils.py' to '/var/cache/salt/minion/extmods/modules/devops_utils.py'
2018-09-29 14:01:43,820 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/dockerng_service.py' to '/var/cache/salt/minion/extmods/modules/dockerng_service.py'
2018-09-29 14:01:43,820 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/encode_json.py' to '/var/cache/salt/minion/extmods/modules/encode_json.py'
2018-09-29 14:01:43,821 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/gerrit.py' to '/var/cache/salt/minion/extmods/modules/gerrit.py'
2018-09-29 14:01:43,821 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/glanceng.py' to '/var/cache/salt/minion/extmods/modules/glanceng.py'
2018-09-29 14:01:43,822 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/glancev2/__init__.py' to '/var/cache/salt/minion/extmods/modules/glancev2/__init__.py'
2018-09-29 14:01:43,823 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/glancev2/common.py' to '/var/cache/salt/minion/extmods/modules/glancev2/common.py'
2018-09-29 14:01:43,823 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/glancev2/image.py' to '/var/cache/salt/minion/extmods/modules/glancev2/image.py'
2018-09-29 14:01:43,824 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/glancev2/task.py' to '/var/cache/salt/minion/extmods/modules/glancev2/task.py'
2018-09-29 14:01:43,824 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/heat.py' to '/var/cache/salt/minion/extmods/modules/heat.py'
2018-09-29 14:01:43,825 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/heatv1/__init__.py' to '/var/cache/salt/minion/extmods/modules/heatv1/__init__.py'
2018-09-29 14:01:43,825 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/heatv1/common.py' to '/var/cache/salt/minion/extmods/modules/heatv1/common.py'
2018-09-29 14:01:43,826 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/heatv1/stack.py' to '/var/cache/salt/minion/extmods/modules/heatv1/stack.py'
2018-09-29 14:01:43,826 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/heka_alarming.py' to '/var/cache/salt/minion/extmods/modules/heka_alarming.py'
2018-09-29 14:01:43,827 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/helm.py' to '/var/cache/salt/minion/extmods/modules/helm.py'
2018-09-29 14:01:43,827 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/jenkins_common.py' to '/var/cache/salt/minion/extmods/modules/jenkins_common.py'
2018-09-29 14:01:43,828 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystone_policy.py' to '/var/cache/salt/minion/extmods/modules/keystone_policy.py'
2018-09-29 14:01:43,828 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystoneng.py' to '/var/cache/salt/minion/extmods/modules/keystoneng.py'
2018-09-29 14:01:43,829 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/__init__.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/__init__.py'
2018-09-29 14:01:43,830 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/arg_converter.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/arg_converter.py'
2018-09-29 14:01:43,830 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/common.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/common.py'
2018-09-29 14:01:43,831 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/domains.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/domains.py'
2018-09-29 14:01:43,832 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/endpoints.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/endpoints.py'
2018-09-29 14:01:43,832 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/groups.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/groups.py'
2018-09-29 14:01:43,833 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/lists.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/lists.py'
2018-09-29 14:01:43,833 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/projects.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/projects.py'
2018-09-29 14:01:43,834 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/regions.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/regions.py'
2018-09-29 14:01:43,834 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/roles.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/roles.py'
2018-09-29 14:01:43,835 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/services.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/services.py'
2018-09-29 14:01:43,835 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/keystonev3/users.py' to '/var/cache/salt/minion/extmods/modules/keystonev3/users.py'
2018-09-29 14:01:43,836 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/linux_hosts.py' to '/var/cache/salt/minion/extmods/modules/linux_hosts.py'
2018-09-29 14:01:43,836 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/linux_netlink.py' to '/var/cache/salt/minion/extmods/modules/linux_netlink.py'
2018-09-29 14:01:43,837 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/maas.py' to '/var/cache/salt/minion/extmods/modules/maas.py'
2018-09-29 14:01:43,838 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/maas_client.py' to '/var/cache/salt/minion/extmods/modules/maas_client.py'
2018-09-29 14:01:43,838 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/maasng.py' to '/var/cache/salt/minion/extmods/modules/maasng.py'
2018-09-29 14:01:43,839 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/modelschema.py' to '/var/cache/salt/minion/extmods/modules/modelschema.py'
2018-09-29 14:01:43,840 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/modelutils.py' to '/var/cache/salt/minion/extmods/modules/modelutils.py'
2018-09-29 14:01:43,840 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/multipart.py' to '/var/cache/salt/minion/extmods/modules/multipart.py'
2018-09-29 14:01:43,841 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/nagios_alarming.py' to '/var/cache/salt/minion/extmods/modules/nagios_alarming.py'
2018-09-29 14:01:43,841 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/netutils.py' to '/var/cache/salt/minion/extmods/modules/netutils.py'
2018-09-29 14:01:43,842 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/neutronng.py' to '/var/cache/salt/minion/extmods/modules/neutronng.py'
2018-09-29 14:01:43,842 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/neutronv2/__init__.py' to '/var/cache/salt/minion/extmods/modules/neutronv2/__init__.py'
2018-09-29 14:01:43,843 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/neutronv2/agents.py' to '/var/cache/salt/minion/extmods/modules/neutronv2/agents.py'
2018-09-29 14:01:43,843 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/neutronv2/arg_converter.py' to '/var/cache/salt/minion/extmods/modules/neutronv2/arg_converter.py'
2018-09-29 14:01:43,844 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/neutronv2/auto_alloc.py' to '/var/cache/salt/minion/extmods/modules/neutronv2/auto_alloc.py'
2018-09-29 14:01:43,844 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/neutronv2/common.py' to '/var/cache/salt/minion/extmods/modules/neutronv2/common.py'
2018-09-29 14:01:43,845 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/neutronv2/lists.py' to '/var/cache/salt/minion/extmods/modules/neutronv2/lists.py'
2018-09-29 14:01:43,845 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/neutronv2/networks.py' to '/var/cache/salt/minion/extmods/modules/neutronv2/networks.py'
2018-09-29 14:01:43,846 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/neutronv2/routers.py' to '/var/cache/salt/minion/extmods/modules/neutronv2/routers.py'
2018-09-29 14:01:43,846 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/neutronv2/subnetpools.py' to '/var/cache/salt/minion/extmods/modules/neutronv2/subnetpools.py'
2018-09-29 14:01:43,847 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/neutronv2/subnets.py' to '/var/cache/salt/minion/extmods/modules/neutronv2/subnets.py'
2018-09-29 14:01:43,847 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/novang.py' to '/var/cache/salt/minion/extmods/modules/novang.py'
2018-09-29 14:01:43,848 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/novav21/__init__.py' to '/var/cache/salt/minion/extmods/modules/novav21/__init__.py'
2018-09-29 14:01:43,848 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/novav21/aggregates.py' to '/var/cache/salt/minion/extmods/modules/novav21/aggregates.py'
2018-09-29 14:01:43,849 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/novav21/common.py' to '/var/cache/salt/minion/extmods/modules/novav21/common.py'
2018-09-29 14:01:43,849 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/novav21/flavors.py' to '/var/cache/salt/minion/extmods/modules/novav21/flavors.py'
2018-09-29 14:01:43,850 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/novav21/keypairs.py' to '/var/cache/salt/minion/extmods/modules/novav21/keypairs.py'
2018-09-29 14:01:43,850 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/novav21/quotas.py' to '/var/cache/salt/minion/extmods/modules/novav21/quotas.py'
2018-09-29 14:01:43,851 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/novav21/servers.py' to '/var/cache/salt/minion/extmods/modules/novav21/servers.py'
2018-09-29 14:01:43,851 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/novav21/services.py' to '/var/cache/salt/minion/extmods/modules/novav21/services.py'
2018-09-29 14:01:43,851 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/octaviav2/__init__.py' to '/var/cache/salt/minion/extmods/modules/octaviav2/__init__.py'
2018-09-29 14:01:43,852 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/octaviav2/common.py' to '/var/cache/salt/minion/extmods/modules/octaviav2/common.py'
2018-09-29 14:01:43,852 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/octaviav2/loadbalancers.py' to '/var/cache/salt/minion/extmods/modules/octaviav2/loadbalancers.py'
2018-09-29 14:01:43,853 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/reclass.py' to '/var/cache/salt/minion/extmods/modules/reclass.py'
2018-09-29 14:01:43,854 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/rsyslog_util.py' to '/var/cache/salt/minion/extmods/modules/rsyslog_util.py'
2018-09-29 14:01:43,854 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/rundeck.py' to '/var/cache/salt/minion/extmods/modules/rundeck.py'
2018-09-29 14:01:43,855 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/saltkey.py' to '/var/cache/salt/minion/extmods/modules/saltkey.py'
2018-09-29 14:01:43,855 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/saltresource.py' to '/var/cache/salt/minion/extmods/modules/saltresource.py'
2018-09-29 14:01:43,856 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/seedng.py' to '/var/cache/salt/minion/extmods/modules/seedng.py'
2018-09-29 14:01:43,856 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/testing/__init__.py' to '/var/cache/salt/minion/extmods/modules/testing/__init__.py'
2018-09-29 14:01:43,857 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/testing/credentials.py' to '/var/cache/salt/minion/extmods/modules/testing/credentials.py'
2018-09-29 14:01:43,857 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/testing/django.py' to '/var/cache/salt/minion/extmods/modules/testing/django.py'
2018-09-29 14:01:43,858 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/testing/django_client_proxy.py' to '/var/cache/salt/minion/extmods/modules/testing/django_client_proxy.py'
2018-09-29 14:01:43,858 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/utils.py' to '/var/cache/salt/minion/extmods/modules/utils.py'
2018-09-29 14:01:43,859 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_modules/virtng.py' to '/var/cache/salt/minion/extmods/modules/virtng.py'
2018-09-29 14:01:43,869 [salt.utils.extmods:82  ][INFO    ][6224] Syncing states for environment 'base'
2018-09-29 14:01:43,869 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_states, for base)
2018-09-29 14:01:43,869 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_states/' for environment 'base'
2018-09-29 14:01:44,494 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/avinetworks.py' to '/var/cache/salt/minion/extmods/states/avinetworks.py'
2018-09-29 14:01:44,495 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/barbicanv1.py' to '/var/cache/salt/minion/extmods/states/barbicanv1.py'
2018-09-29 14:01:44,496 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/cinderng.py' to '/var/cache/salt/minion/extmods/states/cinderng.py'
2018-09-29 14:01:44,496 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/cinderv3.py' to '/var/cache/salt/minion/extmods/states/cinderv3.py'
2018-09-29 14:01:44,497 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/contrail.py' to '/var/cache/salt/minion/extmods/states/contrail.py'
2018-09-29 14:01:44,497 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/debmirror.py' to '/var/cache/salt/minion/extmods/states/debmirror.py'
2018-09-29 14:01:44,498 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/dockerng_service.py' to '/var/cache/salt/minion/extmods/states/dockerng_service.py'
2018-09-29 14:01:44,498 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/gerrit.py' to '/var/cache/salt/minion/extmods/states/gerrit.py'
2018-09-29 14:01:44,499 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/glanceng.py' to '/var/cache/salt/minion/extmods/states/glanceng.py'
2018-09-29 14:01:44,500 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/glancev2.py' to '/var/cache/salt/minion/extmods/states/glancev2.py'
2018-09-29 14:01:44,500 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/grafana3_dashboard.py' to '/var/cache/salt/minion/extmods/states/grafana3_dashboard.py'
2018-09-29 14:01:44,501 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/grafana3_datasource.py' to '/var/cache/salt/minion/extmods/states/grafana3_datasource.py'
2018-09-29 14:01:44,501 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/heat.py' to '/var/cache/salt/minion/extmods/states/heat.py'
2018-09-29 14:01:44,502 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/heatv1.py' to '/var/cache/salt/minion/extmods/states/heatv1.py'
2018-09-29 14:01:44,502 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/helm_release.py' to '/var/cache/salt/minion/extmods/states/helm_release.py'
2018-09-29 14:01:44,504 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/helm_repos.py' to '/var/cache/salt/minion/extmods/states/helm_repos.py'
2018-09-29 14:01:44,505 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/httpng.py' to '/var/cache/salt/minion/extmods/states/httpng.py'
2018-09-29 14:01:44,505 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_approval.py' to '/var/cache/salt/minion/extmods/states/jenkins_approval.py'
2018-09-29 14:01:44,506 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_artifactory.py' to '/var/cache/salt/minion/extmods/states/jenkins_artifactory.py'
2018-09-29 14:01:44,507 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_credential.py' to '/var/cache/salt/minion/extmods/states/jenkins_credential.py'
2018-09-29 14:01:44,507 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_gerrit.py' to '/var/cache/salt/minion/extmods/states/jenkins_gerrit.py'
2018-09-29 14:01:44,508 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_globalenvprop.py' to '/var/cache/salt/minion/extmods/states/jenkins_globalenvprop.py'
2018-09-29 14:01:44,508 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_jira.py' to '/var/cache/salt/minion/extmods/states/jenkins_jira.py'
2018-09-29 14:01:44,508 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_job.py' to '/var/cache/salt/minion/extmods/states/jenkins_job.py'
2018-09-29 14:01:44,509 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_lib.py' to '/var/cache/salt/minion/extmods/states/jenkins_lib.py'
2018-09-29 14:01:44,509 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_node.py' to '/var/cache/salt/minion/extmods/states/jenkins_node.py'
2018-09-29 14:01:44,510 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_plugin.py' to '/var/cache/salt/minion/extmods/states/jenkins_plugin.py'
2018-09-29 14:01:44,510 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_security.py' to '/var/cache/salt/minion/extmods/states/jenkins_security.py'
2018-09-29 14:01:44,511 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_slack.py' to '/var/cache/salt/minion/extmods/states/jenkins_slack.py'
2018-09-29 14:01:44,512 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_smtp.py' to '/var/cache/salt/minion/extmods/states/jenkins_smtp.py'
2018-09-29 14:01:44,512 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_theme.py' to '/var/cache/salt/minion/extmods/states/jenkins_theme.py'
2018-09-29 14:01:44,513 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_throttle_category.py' to '/var/cache/salt/minion/extmods/states/jenkins_throttle_category.py'
2018-09-29 14:01:44,513 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_user.py' to '/var/cache/salt/minion/extmods/states/jenkins_user.py'
2018-09-29 14:01:44,514 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/jenkins_view.py' to '/var/cache/salt/minion/extmods/states/jenkins_view.py'
2018-09-29 14:01:44,514 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/keystone_policy.py' to '/var/cache/salt/minion/extmods/states/keystone_policy.py'
2018-09-29 14:01:44,515 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/keystoneng.py' to '/var/cache/salt/minion/extmods/states/keystoneng.py'
2018-09-29 14:01:44,515 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/keystonev3.py' to '/var/cache/salt/minion/extmods/states/keystonev3.py'
2018-09-29 14:01:44,516 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/kibana_object.py' to '/var/cache/salt/minion/extmods/states/kibana_object.py'
2018-09-29 14:01:44,517 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/maasng.py' to '/var/cache/salt/minion/extmods/states/maasng.py'
2018-09-29 14:01:44,517 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/neutronng.py' to '/var/cache/salt/minion/extmods/states/neutronng.py'
2018-09-29 14:01:44,518 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/neutronv2.py' to '/var/cache/salt/minion/extmods/states/neutronv2.py'
2018-09-29 14:01:44,519 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/novang.py' to '/var/cache/salt/minion/extmods/states/novang.py'
2018-09-29 14:01:44,520 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/novav21.py' to '/var/cache/salt/minion/extmods/states/novav21.py'
2018-09-29 14:01:44,520 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/octaviav2.py' to '/var/cache/salt/minion/extmods/states/octaviav2.py'
2018-09-29 14:01:44,521 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/powerdns_mysql.py' to '/var/cache/salt/minion/extmods/states/powerdns_mysql.py'
2018-09-29 14:01:44,521 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/reclass.py' to '/var/cache/salt/minion/extmods/states/reclass.py'
2018-09-29 14:01:44,522 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/rundeck_project.py' to '/var/cache/salt/minion/extmods/states/rundeck_project.py'
2018-09-29 14:01:44,522 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/rundeck_scm.py' to '/var/cache/salt/minion/extmods/states/rundeck_scm.py'
2018-09-29 14:01:44,523 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_states/rundeck_secret.py' to '/var/cache/salt/minion/extmods/states/rundeck_secret.py'
2018-09-29 14:01:44,526 [salt.utils.extmods:71  ][INFO    ][6224] Creating module dir '/var/cache/salt/minion/extmods/sdb'
2018-09-29 14:01:44,530 [salt.utils.extmods:82  ][INFO    ][6224] Syncing sdb for environment 'base'
2018-09-29 14:01:44,530 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_sdb, for base)
2018-09-29 14:01:44,531 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_sdb/' for environment 'base'
2018-09-29 14:01:44,607 [salt.utils.extmods:82  ][INFO    ][6224] Syncing grains for environment 'base'
2018-09-29 14:01:44,607 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_grains, for base)
2018-09-29 14:01:44,607 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_grains/' for environment 'base'
2018-09-29 14:01:44,881 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/ceilometer_policy.py' to '/var/cache/salt/minion/extmods/grains/ceilometer_policy.py'
2018-09-29 14:01:44,882 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/ceph.py' to '/var/cache/salt/minion/extmods/grains/ceph.py'
2018-09-29 14:01:44,883 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/cinder_policy.py' to '/var/cache/salt/minion/extmods/grains/cinder_policy.py'
2018-09-29 14:01:44,883 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/docker_swarm.py' to '/var/cache/salt/minion/extmods/grains/docker_swarm.py'
2018-09-29 14:01:44,883 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/glance_policy.py' to '/var/cache/salt/minion/extmods/grains/glance_policy.py'
2018-09-29 14:01:44,884 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/heat_policy.py' to '/var/cache/salt/minion/extmods/grains/heat_policy.py'
2018-09-29 14:01:44,884 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/jenkins_plugins.py' to '/var/cache/salt/minion/extmods/grains/jenkins_plugins.py'
2018-09-29 14:01:44,885 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/keystone_policy.py' to '/var/cache/salt/minion/extmods/grains/keystone_policy.py'
2018-09-29 14:01:44,885 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/kubernetes.py' to '/var/cache/salt/minion/extmods/grains/kubernetes.py'
2018-09-29 14:01:44,886 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/neutron_policy.py' to '/var/cache/salt/minion/extmods/grains/neutron_policy.py'
2018-09-29 14:01:44,886 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/nova_policy.py' to '/var/cache/salt/minion/extmods/grains/nova_policy.py'
2018-09-29 14:01:44,887 [salt.utils.extmods:111 ][INFO    ][6224] Copying '/var/cache/salt/minion/files/base/_grains/ssh_fingerprints.py' to '/var/cache/salt/minion/extmods/grains/ssh_fingerprints.py'
2018-09-29 14:01:44,888 [salt.utils.extmods:71  ][INFO    ][6224] Creating module dir '/var/cache/salt/minion/extmods/renderers'
2018-09-29 14:01:44,893 [salt.utils.extmods:82  ][INFO    ][6224] Syncing renderers for environment 'base'
2018-09-29 14:01:44,893 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_renderers, for base)
2018-09-29 14:01:44,893 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_renderers/' for environment 'base'
2018-09-29 14:01:45,031 [salt.utils.extmods:71  ][INFO    ][6224] Creating module dir '/var/cache/salt/minion/extmods/returners'
2018-09-29 14:01:45,035 [salt.utils.extmods:82  ][INFO    ][6224] Syncing returners for environment 'base'
2018-09-29 14:01:45,035 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_returners, for base)
2018-09-29 14:01:45,035 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_returners/' for environment 'base'
2018-09-29 14:01:45,163 [salt.utils.extmods:71  ][INFO    ][6224] Creating module dir '/var/cache/salt/minion/extmods/output'
2018-09-29 14:01:45,167 [salt.utils.extmods:82  ][INFO    ][6224] Syncing output for environment 'base'
2018-09-29 14:01:45,167 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_output, for base)
2018-09-29 14:01:45,167 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_output/' for environment 'base'
2018-09-29 14:01:45,264 [salt.utils.extmods:71  ][INFO    ][6224] Creating module dir '/var/cache/salt/minion/extmods/utils'
2018-09-29 14:01:45,268 [salt.utils.extmods:82  ][INFO    ][6224] Syncing utils for environment 'base'
2018-09-29 14:01:45,268 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_utils, for base)
2018-09-29 14:01:45,268 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_utils/' for environment 'base'
2018-09-29 14:01:45,360 [salt.utils.extmods:71  ][INFO    ][6224] Creating module dir '/var/cache/salt/minion/extmods/log_handlers'
2018-09-29 14:01:45,364 [salt.utils.extmods:82  ][INFO    ][6224] Syncing log_handlers for environment 'base'
2018-09-29 14:01:45,364 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_log_handlers, for base)
2018-09-29 14:01:45,365 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_log_handlers/' for environment 'base'
2018-09-29 14:01:45,460 [salt.utils.extmods:71  ][INFO    ][6224] Creating module dir '/var/cache/salt/minion/extmods/proxy'
2018-09-29 14:01:45,464 [salt.utils.extmods:82  ][INFO    ][6224] Syncing proxy for environment 'base'
2018-09-29 14:01:45,464 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_proxy, for base)
2018-09-29 14:01:45,464 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_proxy/' for environment 'base'
2018-09-29 14:01:45,601 [salt.utils.extmods:71  ][INFO    ][6224] Creating module dir '/var/cache/salt/minion/extmods/engines'
2018-09-29 14:01:45,605 [salt.utils.extmods:82  ][INFO    ][6224] Syncing engines for environment 'base'
2018-09-29 14:01:45,605 [salt.utils.extmods:86  ][INFO    ][6224] Loading cache from salt://_engines, for base)
2018-09-29 14:01:45,605 [salt.fileclient  :229 ][INFO    ][6224] Caching directory '_engines/' for environment 'base'
2018-09-29 14:01:45,689 [salt.minion      :1708][INFO    ][6224] Returning information for job: 20180929140139515571
2018-09-29 14:24:01,903 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command state.sls with jid 20180929142401906498
2018-09-29 14:24:01,912 [salt.minion      :1431][INFO    ][6395] Starting a new job with PID 6395
2018-09-29 14:24:02,798 [salt.state       :905 ][INFO    ][6395] Loading fresh modules for state activity
2018-09-29 14:24:02,834 [salt.fileclient  :1215][INFO    ][6395] Fetching file from saltenv 'base', ** done ** 'glusterfs/client.sls'
2018-09-29 14:24:02,866 [salt.fileclient  :1215][INFO    ][6395] Fetching file from saltenv 'base', ** done ** 'glusterfs/map.jinja'
2018-09-29 14:24:02,886 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:24:03,152 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command 'systemd-escape -p --suffix=mount /var/lib/nova/instances' in directory '/root'
2018-09-29 14:24:03,702 [salt.state       :1770][INFO    ][6395] Running state [glusterfs-client] at time 14:24:03.702189
2018-09-29 14:24:03,702 [salt.state       :1803][INFO    ][6395] Executing state pkg.installed for [glusterfs-client]
2018-09-29 14:24:03,724 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['apt-cache', '-q', 'policy', 'glusterfs-client'] in directory '/root'
2018-09-29 14:24:03,796 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-29 14:24:05,211 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:24:05,225 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'glusterfs-client'] in directory '/root'
2018-09-29 14:24:07,368 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:24:07,392 [salt.state       :290 ][INFO    ][6395] Made the following changes:
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'glusterfs-client' changed from 'absent' to '3.13.2-ubuntu1~xenial2'
'libaio1' changed from 'absent' to '0.3.110-2'
'attr' changed from 'absent' to '1:2.4.47-2'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'
'glusterfs-common' changed from 'absent' to '3.13.2-ubuntu1~xenial2'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'liburcu4' changed from 'absent' to '0.9.1-3'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'python-prettytable' changed from 'absent' to '0.7.2-3'

2018-09-29 14:24:07,405 [salt.state       :905 ][INFO    ][6395] Loading fresh modules for state activity
2018-09-29 14:24:07,439 [salt.state       :1941][INFO    ][6395] Completed state [glusterfs-client] at time 14:24:07.439812 duration_in_ms=3737.624
2018-09-29 14:24:07,445 [salt.state       :1770][INFO    ][6395] Running state [attr] at time 14:24:07.445128
2018-09-29 14:24:07,445 [salt.state       :1803][INFO    ][6395] Executing state pkg.installed for [attr]
2018-09-29 14:24:07,908 [salt.state       :290 ][INFO    ][6395] All specified packages are already installed
2018-09-29 14:24:07,908 [salt.state       :1941][INFO    ][6395] Completed state [attr] at time 14:24:07.908837 duration_in_ms=463.708
2018-09-29 14:24:07,910 [salt.state       :1770][INFO    ][6395] Running state [/etc/systemd/system/var-lib-nova-instances.mount] at time 14:24:07.910283
2018-09-29 14:24:07,910 [salt.state       :1803][INFO    ][6395] Executing state file.managed for [/etc/systemd/system/var-lib-nova-instances.mount]
2018-09-29 14:24:07,939 [salt.fileclient  :1215][INFO    ][6395] Fetching file from saltenv 'base', ** done ** 'glusterfs/files/glusterfs-client.mount'
2018-09-29 14:24:07,950 [salt.state       :290 ][INFO    ][6395] File changed:
New file
2018-09-29 14:24:07,950 [salt.state       :1941][INFO    ][6395] Completed state [/etc/systemd/system/var-lib-nova-instances.mount] at time 14:24:07.950445 duration_in_ms=40.162
2018-09-29 14:24:07,951 [salt.state       :1770][INFO    ][6395] Running state [var-lib-nova-instances.mount] at time 14:24:07.951258
2018-09-29 14:24:07,951 [salt.state       :1803][INFO    ][6395] Executing state service.running for [var-lib-nova-instances.mount]
2018-09-29 14:24:07,951 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['systemctl', 'status', 'var-lib-nova-instances.mount', '-n', '0'] in directory '/root'
2018-09-29 14:24:07,960 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['systemctl', 'is-active', 'var-lib-nova-instances.mount'] in directory '/root'
2018-09-29 14:24:07,965 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['systemctl', 'is-enabled', 'var-lib-nova-instances.mount'] in directory '/root'
2018-09-29 14:24:07,974 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'var-lib-nova-instances.mount'] in directory '/root'
2018-09-29 14:24:08,032 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['systemctl', 'is-active', 'var-lib-nova-instances.mount'] in directory '/root'
2018-09-29 14:24:08,039 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['systemctl', 'is-enabled', 'var-lib-nova-instances.mount'] in directory '/root'
2018-09-29 14:24:08,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['systemctl', 'is-enabled', 'var-lib-nova-instances.mount'] in directory '/root'
2018-09-29 14:24:08,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'var-lib-nova-instances.mount'] in directory '/root'
2018-09-29 14:24:08,146 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6395] Executing command ['systemctl', 'is-enabled', 'var-lib-nova-instances.mount'] in directory '/root'
2018-09-29 14:24:08,154 [salt.state       :290 ][INFO    ][6395] {'var-lib-nova-instances.mount': True}
2018-09-29 14:24:08,154 [salt.state       :1941][INFO    ][6395] Completed state [var-lib-nova-instances.mount] at time 14:24:08.154370 duration_in_ms=203.111
2018-09-29 14:24:08,155 [salt.minion      :1708][INFO    ][6395] Returning information for job: 20180929142401906498
2018-09-29 14:45:20,588 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command state.sls with jid 20180929144520618582
2018-09-29 14:45:20,597 [salt.minion      :1431][INFO    ][7805] Starting a new job with PID 7805
2018-09-29 14:45:23,614 [salt.state       :905 ][INFO    ][7805] Loading fresh modules for state activity
2018-09-29 14:45:23,672 [salt.fileclient  :1215][INFO    ][7805] Fetching file from saltenv 'base', ** done ** 'cinder/init.sls'
2018-09-29 14:45:23,703 [salt.fileclient  :1215][INFO    ][7805] Fetching file from saltenv 'base', ** done ** 'cinder/volume.sls'
2018-09-29 14:45:23,802 [salt.fileclient  :1215][INFO    ][7805] Fetching file from saltenv 'base', ** done ** 'cinder/user.sls'
2018-09-29 14:45:23,864 [salt.fileclient  :1215][INFO    ][7805] Fetching file from saltenv 'base', ** done ** 'cinder/_ssl/volume_mysql.sls'
2018-09-29 14:45:23,930 [salt.fileclient  :1215][INFO    ][7805] Fetching file from saltenv 'base', ** done ** 'cinder/_ssl/rabbitmq.sls'
2018-09-29 14:45:24,434 [salt.state       :1770][INFO    ][7805] Running state [cinder] at time 14:45:24.434629
2018-09-29 14:45:24,434 [salt.state       :1803][INFO    ][7805] Executing state group.present for [cinder]
2018-09-29 14:45:24,435 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['groupadd', '-g 304', '-r', 'cinder'] in directory '/root'
2018-09-29 14:45:24,444 [salt.state       :290 ][INFO    ][7805] {'passwd': 'x', 'gid': 304, 'name': 'cinder', 'members': []}
2018-09-29 14:45:24,445 [salt.state       :1941][INFO    ][7805] Completed state [cinder] at time 14:45:24.445051 duration_in_ms=10.422
2018-09-29 14:45:24,445 [salt.state       :1770][INFO    ][7805] Running state [cinder] at time 14:45:24.445452
2018-09-29 14:45:24,445 [salt.state       :1803][INFO    ][7805] Executing state user.present for [cinder]
2018-09-29 14:45:24,446 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['useradd', '-s', '/bin/false', '-u', '304', '-g', '304', '-m', '-d', '/var/lib/cinder', '-r', 'cinder'] in directory '/root'
2018-09-29 14:45:24,462 [salt.state       :290 ][INFO    ][7805] {'shell': '/bin/false', 'workphone': '', 'uid': 304, 'passwd': 'x', 'roomnumber': '', 'groups': ['cinder'], 'home': '/var/lib/cinder', 'name': 'cinder', 'gid': 304, 'fullname': '', 'homephone': ''}
2018-09-29 14:45:24,462 [salt.state       :1941][INFO    ][7805] Completed state [cinder] at time 14:45:24.462337 duration_in_ms=16.885
2018-09-29 14:45:24,462 [salt.state       :1770][INFO    ][7805] Running state [cinder-volume] at time 14:45:24.462728
2018-09-29 14:45:24,462 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [cinder-volume]
2018-09-29 14:45:24,463 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:45:24,781 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['apt-cache', '-q', 'policy', 'cinder-volume'] in directory '/root'
2018-09-29 14:45:24,846 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-29 14:45:26,545 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:45:26,558 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'cinder-volume'] in directory '/root'
2018-09-29 14:45:30,636 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144530660612
2018-09-29 14:45:30,646 [salt.minion      :1431][INFO    ][8308] Starting a new job with PID 8308
2018-09-29 14:45:30,655 [salt.minion      :1708][INFO    ][8308] Returning information for job: 20180929144530660612
2018-09-29 14:45:40,924 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144540947478
2018-09-29 14:45:40,933 [salt.minion      :1431][INFO    ][8313] Starting a new job with PID 8313
2018-09-29 14:45:40,942 [salt.minion      :1708][INFO    ][8313] Returning information for job: 20180929144540947478
2018-09-29 14:45:50,949 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144550978712
2018-09-29 14:45:50,957 [salt.minion      :1431][INFO    ][8318] Starting a new job with PID 8318
2018-09-29 14:45:50,967 [salt.minion      :1708][INFO    ][8318] Returning information for job: 20180929144550978712
2018-09-29 14:46:01,165 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144601188862
2018-09-29 14:46:01,174 [salt.minion      :1431][INFO    ][10864] Starting a new job with PID 10864
2018-09-29 14:46:01,185 [salt.minion      :1708][INFO    ][10864] Returning information for job: 20180929144601188862
2018-09-29 14:46:11,372 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144611402237
2018-09-29 14:46:11,382 [salt.minion      :1431][INFO    ][12429] Starting a new job with PID 12429
2018-09-29 14:46:11,392 [salt.minion      :1708][INFO    ][12429] Returning information for job: 20180929144611402237
2018-09-29 14:46:21,588 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144621607287
2018-09-29 14:46:21,597 [salt.minion      :1431][INFO    ][12880] Starting a new job with PID 12880
2018-09-29 14:46:21,607 [salt.minion      :1708][INFO    ][12880] Returning information for job: 20180929144621607287
2018-09-29 14:46:31,652 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144631676698
2018-09-29 14:46:31,659 [salt.minion      :1431][INFO    ][13344] Starting a new job with PID 13344
2018-09-29 14:46:31,669 [salt.minion      :1708][INFO    ][13344] Returning information for job: 20180929144631676698
2018-09-29 14:46:32,776 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:46:32,807 [salt.state       :290 ][INFO    ][7805] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-retrying' changed from 'absent' to '1.3.3-1'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.21.1-1~u16.04+mcp4'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-openssl' changed from '0.15.1-2build1' to '16.2.0-2~u16.04+mcp1'
'python-psycopg2' changed from 'absent' to '2.6.1-1build2'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-glanceclient' changed from 'absent' to '1:2.8.0-1~u16.04+mcp12'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '1.1.6-1.1~u16.04+mcp2'
'python-oslo.serialization' changed from 'absent' to '2.20.2-1~u16.04+mcp5'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'python-asn1crypto' changed from 'absent' to '0.22.0-1~u16.04+mcp2'
'python-ply-yacc-3.5' changed from 'absent' to '1'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'sg3-utils' changed from 'absent' to '1.40-0ubuntu1'
'python-tenacity' changed from 'absent' to '3.3.0-1.1~u16.04+mcp2'
'python-oslo.versionedobjects' changed from 'absent' to '1.26.2-1~u16.04+mcp5'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'librados2' changed from 'absent' to '12.2.4-0ubuntu0.17.10.1~cloud0'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-httplib2' changed from 'absent' to '0.9.1+dfsg-1'
'python-testtools' changed from 'absent' to '1.8.1-0ubuntu1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jsonschema' changed from 'absent' to '2.5.1-4'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python2.7-paramiko' changed from 'absent' to '1'
'python-certifi' changed from 'absent' to '2015.11.20.1-2'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'python-oslo.privsep' changed from 'absent' to '1.22.1-1~u16.04+mcp5'
'python2.7-lxml' changed from 'absent' to '1'
'python-suds' changed from 'absent' to '0.7~git20150727.94664dd-3'
'python-oslo.db' changed from 'absent' to '4.25.1-3~u16.04+mcp6'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'python-os-win' changed from 'absent' to '2.2.0-1~u16.04+mcp2'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python-requests' changed from '2.9.1-3' to '2.18.1-2~u16.04+mcp1'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-funcsigs' changed from 'absent' to '1.0.2-3~cloud0'
'python-ply-lex-3.5' changed from 'absent' to '1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-rtslib-fb' changed from 'absent' to '2.1.57+debian-3'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python-oslo-context' changed from 'absent' to '1'
'python2.7-testtools' changed from 'absent' to '1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.30.1-1~u16.04+mcp4'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'liblapack.so.3' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python-oslo.context' changed from 'absent' to '1:2.17.1-1~u16.04+mcp5'
'python-f2py' changed from 'absent' to '1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-cffi' changed from 'absent' to '1.9.1-2~u16.04+mcp3'
'python-barbicanclient' changed from 'absent' to '4.5.2-1.1~u16.04+mcp8'
'python-castellan' changed from 'absent' to '0.12.2-1~u16.04+mcp6'
'python-urllib3' changed from '1.13.1-2ubuntu0.16.04.2' to '1.21.1-1~u16.04+mcp2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-oslo.vmware' changed from 'absent' to '2.17.0-1.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-oslo-log' changed from 'absent' to '1'
'httpd-cgi' changed from 'absent' to '1'
'libsgutils2-2' changed from 'absent' to '1.40-0ubuntu1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-jsonpatch' changed from 'absent' to '1.19-3'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'libapr1' changed from 'absent' to '1.5.2-3'
'python2.7-googleapi' changed from 'absent' to '1'
'tgt' changed from 'absent' to '1:1.0.63-1ubuntu1.1'
'python-oslo.policy' changed from 'absent' to '1.25.3-1~u16.04+mcp4'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '1.7.5.1-6ubuntu3'
'python-googleapi' changed from 'absent' to '1.4.2-1ubuntu1.1'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:4.11.1-1~u16.04+mcp4'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'python-paramiko' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'python-futurist' changed from 'absent' to '0.13.0-2'
'httpd' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-oauth2client' changed from 'absent' to '2.0.1-1'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'python-ply' changed from 'absent' to '3.7-1'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp10'
'python-oslo.utils' changed from 'absent' to '3.28.3-1~u16.04+mcp5'
'python-taskflow' changed from 'absent' to '2.9.0-1.1~u16.04+mcp2'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-automaton' changed from 'absent' to '1.2.0-1'
'python-warlock' changed from 'absent' to '1.1.0-1'
'python-oslo.rootwrap' changed from 'absent' to '5.9.2-1~u16.04+mcp6'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-tooz' changed from 'absent' to '1.47.0-1.1~u16.04+mcp2'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-oslo.i18n' changed from 'absent' to '3.17.1-1~u16.04+mcp4'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'cinder-volume' changed from 'absent' to '2:11.1.1-2~u16.04+mcp107'
'python-oslo.reports' changed from 'absent' to '1.17.0-1.1~u16.04+mcp2'
'python-networkx' changed from 'absent' to '1.11-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python2.7-simplejson' changed from 'absent' to '1'
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-extras' changed from 'absent' to '0.0.3-3'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'thin-provisioning-tools' changed from 'absent' to '0.5.6-1ubuntu1'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-uritemplate' changed from 'absent' to '0.6-1ubuntu1'
'python-oslo.log' changed from 'absent' to '3.30.2-1~u16.04+mcp7'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-cinder' changed from 'absent' to '2:11.1.1-2~u16.04+mcp107'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-osprofiler' changed from 'absent' to '1.11.0-1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'python-oslo.messaging' changed from 'absent' to '5.30.4-1~u16.04+mcp13'
'python-os-brick' changed from 'absent' to '1.15.2-1~u16.04+mcp2'
'python2.7-cmd2' changed from 'absent' to '1'
'python-pycparser' changed from 'absent' to '2.14+dfsg-2build1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'libconfig-general-perl' changed from 'absent' to '2.60-1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-pbr' changed from 'absent' to '2.0.0-1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.4.0-1~u16.04+mcp7'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.13.0-1~u16.04+mcp7'
'python-greenlet' changed from 'absent' to '0.4.9-2fakesync1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.25.1-1~u16.04+mcp4'
'librbd1' changed from 'absent' to '12.2.4-0ubuntu0.17.10.1~cloud0'
'apache2-api-20120211' changed from 'absent' to '1'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp2'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'os-brick-common' changed from 'absent' to '1.15.2-1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.1.0-1~u16.04+mcp12'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.17.0-1~u16.04+mcp2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'ssl-cert' changed from 'absent' to '1.0.37'
'cinder-common' changed from 'absent' to '2:11.1.1-2~u16.04+mcp107'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python2.7-ply' changed from 'absent' to '1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-rsa' changed from 'absent' to '3.2.3-1.1'
'python2.7-rtslib-fb' changed from 'absent' to '1'
'python-cryptography' changed from '1.2.3-1ubuntu0.1' to '2.0.2-1~u16.04+mcp3'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-09-29 14:46:32,822 [salt.state       :905 ][INFO    ][7805] Loading fresh modules for state activity
2018-09-29 14:46:32,852 [salt.state       :1941][INFO    ][7805] Completed state [cinder-volume] at time 14:46:32.852496 duration_in_ms=68389.768
2018-09-29 14:46:32,857 [salt.state       :1770][INFO    ][7805] Running state [lvm2] at time 14:46:32.857214
2018-09-29 14:46:32,857 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [lvm2]
2018-09-29 14:46:33,890 [salt.state       :290 ][INFO    ][7805] All specified packages are already installed
2018-09-29 14:46:33,890 [salt.state       :1941][INFO    ][7805] Completed state [lvm2] at time 14:46:33.890936 duration_in_ms=1033.722
2018-09-29 14:46:33,891 [salt.state       :1770][INFO    ][7805] Running state [sysfsutils] at time 14:46:33.891381
2018-09-29 14:46:33,891 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [sysfsutils]
2018-09-29 14:46:33,898 [salt.state       :290 ][INFO    ][7805] All specified packages are already installed
2018-09-29 14:46:33,898 [salt.state       :1941][INFO    ][7805] Completed state [sysfsutils] at time 14:46:33.898603 duration_in_ms=7.222
2018-09-29 14:46:33,898 [salt.state       :1770][INFO    ][7805] Running state [sg3-utils] at time 14:46:33.898911
2018-09-29 14:46:33,899 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [sg3-utils]
2018-09-29 14:46:33,905 [salt.state       :290 ][INFO    ][7805] All specified packages are already installed
2018-09-29 14:46:33,905 [salt.state       :1941][INFO    ][7805] Completed state [sg3-utils] at time 14:46:33.905672 duration_in_ms=6.762
2018-09-29 14:46:33,906 [salt.state       :1770][INFO    ][7805] Running state [python-cinder] at time 14:46:33.905980
2018-09-29 14:46:33,906 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [python-cinder]
2018-09-29 14:46:33,912 [salt.state       :290 ][INFO    ][7805] All specified packages are already installed
2018-09-29 14:46:33,912 [salt.state       :1941][INFO    ][7805] Completed state [python-cinder] at time 14:46:33.912774 duration_in_ms=6.795
2018-09-29 14:46:33,913 [salt.state       :1770][INFO    ][7805] Running state [python-mysqldb] at time 14:46:33.913083
2018-09-29 14:46:33,913 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [python-mysqldb]
2018-09-29 14:46:33,932 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:46:33,946 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-mysqldb'] in directory '/root'
2018-09-29 14:46:35,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:46:35,375 [salt.state       :290 ][INFO    ][7805] Made the following changes:
'python2.7-mysqldb' changed from 'absent' to '1'
'mysql-common' changed from 'absent' to '5.7.23-0ubuntu0.16.04.1'
'mysql-common-5.6' changed from 'absent' to '1'
'libmysqlclient20' changed from 'absent' to '5.7.23-0ubuntu0.16.04.1'
'python-mysqldb' changed from 'absent' to '1.3.7-1build2'

2018-09-29 14:46:35,392 [salt.state       :905 ][INFO    ][7805] Loading fresh modules for state activity
2018-09-29 14:46:35,421 [salt.state       :1941][INFO    ][7805] Completed state [python-mysqldb] at time 14:46:35.421817 duration_in_ms=1508.733
2018-09-29 14:46:35,426 [salt.state       :1770][INFO    ][7805] Running state [p7zip] at time 14:46:35.426241
2018-09-29 14:46:35,426 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [p7zip]
2018-09-29 14:46:35,927 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:46:35,942 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'p7zip'] in directory '/root'
2018-09-29 14:46:37,423 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:46:37,451 [salt.state       :290 ][INFO    ][7805] Made the following changes:
'p7zip' changed from 'absent' to '9.20.1~dfsg.1-4.2'

2018-09-29 14:46:37,466 [salt.state       :905 ][INFO    ][7805] Loading fresh modules for state activity
2018-09-29 14:46:37,555 [salt.state       :1941][INFO    ][7805] Completed state [p7zip] at time 14:46:37.555871 duration_in_ms=2129.629
2018-09-29 14:46:37,560 [salt.state       :1770][INFO    ][7805] Running state [gettext-base] at time 14:46:37.560388
2018-09-29 14:46:37,560 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [gettext-base]
2018-09-29 14:46:38,056 [salt.state       :290 ][INFO    ][7805] All specified packages are already installed
2018-09-29 14:46:38,057 [salt.state       :1941][INFO    ][7805] Completed state [gettext-base] at time 14:46:38.057252 duration_in_ms=496.863
2018-09-29 14:46:38,057 [salt.state       :1770][INFO    ][7805] Running state [python-memcache] at time 14:46:38.057720
2018-09-29 14:46:38,058 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [python-memcache]
2018-09-29 14:46:38,078 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:46:38,093 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-09-29 14:46:39,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:46:39,822 [salt.state       :290 ][INFO    ][7805] Made the following changes:
'python-memcache' changed from 'absent' to '1.57-2~u16.04+mcp1'

2018-09-29 14:46:39,839 [salt.state       :905 ][INFO    ][7805] Loading fresh modules for state activity
2018-09-29 14:46:39,868 [salt.state       :1941][INFO    ][7805] Completed state [python-memcache] at time 14:46:39.868869 duration_in_ms=1811.148
2018-09-29 14:46:39,873 [salt.state       :1770][INFO    ][7805] Running state [python-pycadf] at time 14:46:39.873584
2018-09-29 14:46:39,873 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [python-pycadf]
2018-09-29 14:46:40,362 [salt.state       :290 ][INFO    ][7805] All specified packages are already installed
2018-09-29 14:46:40,363 [salt.state       :1941][INFO    ][7805] Completed state [python-pycadf] at time 14:46:40.363021 duration_in_ms=489.436
2018-09-29 14:46:40,363 [salt.state       :1770][INFO    ][7805] Running state [cinder_volume_ssl_mysql] at time 14:46:40.363878
2018-09-29 14:46:40,364 [salt.state       :1803][INFO    ][7805] Executing state test.show_notification for [cinder_volume_ssl_mysql]
2018-09-29 14:46:40,364 [salt.state       :290 ][INFO    ][7805] Running cinder._ssl.volume_mysql
2018-09-29 14:46:40,364 [salt.state       :1941][INFO    ][7805] Completed state [cinder_volume_ssl_mysql] at time 14:46:40.364501 duration_in_ms=0.624
2018-09-29 14:46:40,364 [salt.state       :1770][INFO    ][7805] Running state [cinder_volume_ssl_rabbitmq] at time 14:46:40.364881
2018-09-29 14:46:40,365 [salt.state       :1803][INFO    ][7805] Executing state test.show_notification for [cinder_volume_ssl_rabbitmq]
2018-09-29 14:46:40,365 [salt.state       :290 ][INFO    ][7805] Running cinder._ssl.rabbitmq
2018-09-29 14:46:40,365 [salt.state       :1941][INFO    ][7805] Completed state [cinder_volume_ssl_rabbitmq] at time 14:46:40.365479 duration_in_ms=0.597
2018-09-29 14:46:40,367 [salt.state       :1770][INFO    ][7805] Running state [/var/lock/cinder] at time 14:46:40.367164
2018-09-29 14:46:40,367 [salt.state       :1803][INFO    ][7805] Executing state file.directory for [/var/lock/cinder]
2018-09-29 14:46:40,368 [salt.state       :290 ][INFO    ][7805] Directory /var/lock/cinder is in the correct state
Directory /var/lock/cinder updated
2018-09-29 14:46:40,368 [salt.state       :1941][INFO    ][7805] Completed state [/var/lock/cinder] at time 14:46:40.368352 duration_in_ms=1.189
2018-09-29 14:46:40,368 [salt.state       :1770][INFO    ][7805] Running state [/etc/cinder/cinder.conf] at time 14:46:40.368949
2018-09-29 14:46:40,369 [salt.state       :1803][INFO    ][7805] Executing state file.managed for [/etc/cinder/cinder.conf]
2018-09-29 14:46:40,423 [salt.fileclient  :1215][INFO    ][7805] Fetching file from saltenv 'base', ** done ** 'cinder/files/pike/cinder.conf.volume.Debian'
2018-09-29 14:46:40,561 [salt.fileclient  :1215][INFO    ][7805] Fetching file from saltenv 'base', ** done ** 'cinder/files/backend/_lvm.conf'
2018-09-29 14:46:40,566 [salt.state       :290 ][INFO    ][7805] File changed:
--- 
+++ 
@@ -1,15 +1,120 @@
+
+
 [DEFAULT]
 rootwrap_config = /etc/cinder/rootwrap.conf
 api_paste_confg = /etc/cinder/api-paste.ini
+
 iscsi_helper = tgtadm
 volume_name_template = volume-%s
-volume_group = cinder-volumes
+#volume_group = cinder
+
 verbose = True
+
+osapi_volume_workers = 4
+
 auth_strategy = keystone
+
 state_path = /var/lib/cinder
-lock_path = /var/lock/cinder
+
+use_syslog=False
+
+glance_num_retries=0
+debug=False
+
+os_region_name=RegionOne
+
+#glance_api_ssl_compression=False
+#glance_api_insecure=False
+
+osapi_volume_listen=192.168.10.53
+
+glance_api_servers = http://192.168.10.35:9292
+
+
+glance_host=192.168.10.35
+glance_port=9292
+glance_api_version=2
+
+os_privileged_user_name=cinder
+os_privileged_user_password=opnfv_secret
+os_privileged_user_tenant=service
+os_privileged_user_auth_url=http://192.168.10.35:5000/v3/
+
+volume_backend_name=DEFAULT
+
+default_volume_type=lvm-driver
+
+enabled_backends=lvm-driver
+
+# Enables the Force option on upload_to_image. This enables running
+# upload_volume on in-use volumes for backends that support it. (boolean value)
+#enable_force_upload = false
+enable_force_upload = false
+
+#RPC response timeout recommended by Hitachi
+rpc_response_timeout=3600
+
+#Rabbit
+control_exchange=cinder
+
+
+volume_clear=none
+
+
+volume_name_template = volume-%s
+
+#volume_group = vg_cinder_volume
+
 volumes_dir = /var/lib/cinder/volumes
-enabled_backends = lvm
+log_dir=/var/log/cinder
+
+# Use syslog for logging. (boolean value)
+#use_syslog=false
+
+use_syslog=false
+verbose=True
+
+nova_catalog_admin_info = compute:nova:adminURL
+nova_catalog_info = compute:nova:internalURL
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+[oslo_messaging_notifications]
+
+[oslo_concurrency]
+
+lock_path=/var/lock/cinder
+
+[oslo_middleware]
+
+enable_proxy_headers_parsing = True
+
+[keystone_authtoken]
+signing_dir=/tmp/keystone-signing-cinder
+revocation_cache_time = 10
+auth_type = password
+user_domain_name = Default
+project_domain_name = Default
+project_name = service
+username = cinder
+password = opnfv_secret
+auth_uri=http://192.168.10.35:5000
+auth_url=http://192.168.10.35:35357
+
+# Temporary disabled for backward compataiblity
+#auth_uri=http://192.168.10.35/identity
+#auth_url=http://192.168.10.35/identity_v2_admin
+memcached_servers=192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+auth_version = v3
 
 [database]
-connection = sqlite:////var/lib/cinder/cinder.sqlite
+idle_timeout=3600
+max_pool_size=30
+max_retries=-1
+max_overflow=40
+connection = mysql+pymysql://cinder:opnfv_secret@192.168.10.23/cinder?charset=utf8
+[lvm-driver]
+host=cmp002
+volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
+volume_backend_name=lvm-driver
+iscsi_helper = tgtadm
+volume_group = vgroot

2018-09-29 14:46:40,567 [salt.state       :1941][INFO    ][7805] Completed state [/etc/cinder/cinder.conf] at time 14:46:40.567048 duration_in_ms=198.099
2018-09-29 14:46:40,567 [salt.state       :1770][INFO    ][7805] Running state [/etc/cinder/api-paste.ini] at time 14:46:40.567613
2018-09-29 14:46:40,567 [salt.state       :1803][INFO    ][7805] Executing state file.managed for [/etc/cinder/api-paste.ini]
2018-09-29 14:46:40,612 [salt.fileclient  :1215][INFO    ][7805] Fetching file from saltenv 'base', ** done ** 'cinder/files/pike/api-paste.ini.volume.Debian'
2018-09-29 14:46:40,672 [salt.state       :290 ][INFO    ][7805] File changed:
--- 
+++ 
@@ -12,8 +12,8 @@
 [composite:openstack_volume_api_v1]
 use = call:cinder.api.middleware.auth:pipeline_factory
 noauth = cors http_proxy_to_wsgi request_id faultwrap sizelimit osprofiler noauth apiv1
-keystone = cors http_proxy_to_wsgi request_id faultwrap sizelimit osprofiler authtoken keystonecontext apiv1
-keystone_nolimit = cors http_proxy_to_wsgi request_id faultwrap sizelimit osprofiler authtoken keystonecontext apiv1
+keystone = cors http_proxy_to_wsgi request_id faultwrap sizelimit osprofiler authtoken keystonecontext  apiv1
+keystone_nolimit = cors http_proxy_to_wsgi request_id faultwrap sizelimit osprofiler authtoken keystonecontext  apiv1
 
 [composite:openstack_volume_api_v2]
 use = call:cinder.api.middleware.auth:pipeline_factory

2018-09-29 14:46:40,672 [salt.state       :1941][INFO    ][7805] Completed state [/etc/cinder/api-paste.ini] at time 14:46:40.672782 duration_in_ms=105.169
2018-09-29 14:46:40,673 [salt.state       :1770][INFO    ][7805] Running state [/etc/default/cinder-volume] at time 14:46:40.673225
2018-09-29 14:46:40,673 [salt.state       :1803][INFO    ][7805] Executing state file.managed for [/etc/default/cinder-volume]
2018-09-29 14:46:40,714 [salt.fileclient  :1215][INFO    ][7805] Fetching file from saltenv 'base', ** done ** 'cinder/files/default'
2018-09-29 14:46:40,721 [salt.state       :290 ][INFO    ][7805] File changed:
New file
2018-09-29 14:46:40,721 [salt.state       :1941][INFO    ][7805] Completed state [/etc/default/cinder-volume] at time 14:46:40.721330 duration_in_ms=48.105
2018-09-29 14:46:40,723 [salt.state       :1770][INFO    ][7805] Running state [cinder-volume] at time 14:46:40.723295
2018-09-29 14:46:40,723 [salt.state       :1803][INFO    ][7805] Executing state service.running for [cinder-volume]
2018-09-29 14:46:40,724 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'status', 'cinder-volume.service', '-n', '0'] in directory '/root'
2018-09-29 14:46:40,733 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'is-active', 'cinder-volume.service'] in directory '/root'
2018-09-29 14:46:40,740 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'is-enabled', 'cinder-volume.service'] in directory '/root'
2018-09-29 14:46:40,746 [salt.state       :290 ][INFO    ][7805] The service cinder-volume is already running
2018-09-29 14:46:40,746 [salt.state       :1941][INFO    ][7805] Completed state [cinder-volume] at time 14:46:40.746362 duration_in_ms=23.067
2018-09-29 14:46:40,746 [salt.state       :1770][INFO    ][7805] Running state [cinder-volume] at time 14:46:40.746578
2018-09-29 14:46:40,746 [salt.state       :1803][INFO    ][7805] Executing state service.mod_watch for [cinder-volume]
2018-09-29 14:46:40,747 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'is-active', 'cinder-volume.service'] in directory '/root'
2018-09-29 14:46:40,753 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'cinder-volume.service'] in directory '/root'
2018-09-29 14:46:40,783 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][7805] Command '['systemd-run', '--scope', 'systemctl', 'restart', 'cinder-volume.service']' failed with return code: 1
2018-09-29 14:46:40,783 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][7805] stderr: Running scope as unit run-rf47721fb18674bb3a39cc12129f2f79e.scope.
Job for cinder-volume.service failed. See "systemctl status cinder-volume.service" and "journalctl -xe" for details.
2018-09-29 14:46:40,784 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][7805] retcode: 1
2018-09-29 14:46:40,784 [salt.state       :292 ][ERROR   ][7805] Running scope as unit run-rf47721fb18674bb3a39cc12129f2f79e.scope.
Job for cinder-volume.service failed. See "systemctl status cinder-volume.service" and "journalctl -xe" for details.
2018-09-29 14:46:40,784 [salt.state       :1941][INFO    ][7805] Completed state [cinder-volume] at time 14:46:40.784438 duration_in_ms=37.86
2018-09-29 14:46:40,785 [salt.state       :1770][INFO    ][7805] Running state [open-iscsi] at time 14:46:40.785018
2018-09-29 14:46:40,785 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [open-iscsi]
2018-09-29 14:46:40,793 [salt.state       :290 ][INFO    ][7805] All specified packages are already installed
2018-09-29 14:46:40,793 [salt.state       :1941][INFO    ][7805] Completed state [open-iscsi] at time 14:46:40.793657 duration_in_ms=8.64
2018-09-29 14:46:40,794 [salt.state       :1770][INFO    ][7805] Running state [tgt] at time 14:46:40.794046
2018-09-29 14:46:40,794 [salt.state       :1803][INFO    ][7805] Executing state pkg.installed for [tgt]
2018-09-29 14:46:40,804 [salt.state       :290 ][INFO    ][7805] All specified packages are already installed
2018-09-29 14:46:40,804 [salt.state       :1941][INFO    ][7805] Completed state [tgt] at time 14:46:40.804303 duration_in_ms=10.257
2018-09-29 14:46:40,804 [salt.state       :1770][INFO    ][7805] Running state [open-iscsi] at time 14:46:40.804958
2018-09-29 14:46:40,805 [salt.state       :1803][INFO    ][7805] Executing state service.running for [open-iscsi]
2018-09-29 14:46:40,805 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'status', 'open-iscsi.service', '-n', '0'] in directory '/root'
2018-09-29 14:46:40,814 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'is-active', 'open-iscsi.service'] in directory '/root'
2018-09-29 14:46:40,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'is-enabled', 'open-iscsi.service'] in directory '/root'
2018-09-29 14:46:40,826 [salt.state       :290 ][INFO    ][7805] The service open-iscsi is already running
2018-09-29 14:46:40,826 [salt.state       :1941][INFO    ][7805] Completed state [open-iscsi] at time 14:46:40.826715 duration_in_ms=21.757
2018-09-29 14:46:40,827 [salt.state       :1770][INFO    ][7805] Running state [tgt] at time 14:46:40.827156
2018-09-29 14:46:40,827 [salt.state       :1803][INFO    ][7805] Executing state service.running for [tgt]
2018-09-29 14:46:40,827 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'status', 'tgt.service', '-n', '0'] in directory '/root'
2018-09-29 14:46:40,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'is-active', 'tgt.service'] in directory '/root'
2018-09-29 14:46:40,841 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'is-enabled', 'tgt.service'] in directory '/root'
2018-09-29 14:46:40,848 [salt.state       :290 ][INFO    ][7805] The service tgt is already running
2018-09-29 14:46:40,848 [salt.state       :1941][INFO    ][7805] Completed state [tgt] at time 14:46:40.848314 duration_in_ms=21.157
2018-09-29 14:46:40,848 [salt.state       :1770][INFO    ][7805] Running state [iscsid] at time 14:46:40.848830
2018-09-29 14:46:40,849 [salt.state       :1803][INFO    ][7805] Executing state service.running for [iscsid]
2018-09-29 14:46:40,849 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'status', 'iscsid.service', '-n', '0'] in directory '/root'
2018-09-29 14:46:40,858 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'is-active', 'iscsid.service'] in directory '/root'
2018-09-29 14:46:40,864 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7805] Executing command ['systemctl', 'is-enabled', 'iscsid.service'] in directory '/root'
2018-09-29 14:46:40,871 [salt.state       :290 ][INFO    ][7805] The service iscsid is already running
2018-09-29 14:46:40,871 [salt.state       :1941][INFO    ][7805] Completed state [iscsid] at time 14:46:40.871600 duration_in_ms=22.769
2018-09-29 14:46:40,873 [salt.minion      :1708][INFO    ][7805] Returning information for job: 20180929144520618582
2018-09-29 14:46:51,710 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command state.sls with jid 20180929144651739335
2018-09-29 14:46:51,719 [salt.minion      :1431][INFO    ][14251] Starting a new job with PID 14251
2018-09-29 14:46:55,417 [salt.state       :905 ][INFO    ][14251] Loading fresh modules for state activity
2018-09-29 14:46:56,699 [salt.state       :1770][INFO    ][14251] Running state [cinder-volume] at time 14:46:56.699837
2018-09-29 14:46:56,700 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [cinder-volume]
2018-09-29 14:46:56,700 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:46:56,993 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:56,994 [salt.state       :1941][INFO    ][14251] Completed state [cinder-volume] at time 14:46:56.993969 duration_in_ms=294.133
2018-09-29 14:46:56,994 [salt.state       :1770][INFO    ][14251] Running state [lvm2] at time 14:46:56.994570
2018-09-29 14:46:56,994 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [lvm2]
2018-09-29 14:46:57,076 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:57,077 [salt.state       :1941][INFO    ][14251] Completed state [lvm2] at time 14:46:57.077208 duration_in_ms=82.639
2018-09-29 14:46:57,077 [salt.state       :1770][INFO    ][14251] Running state [sysfsutils] at time 14:46:57.077424
2018-09-29 14:46:57,077 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [sysfsutils]
2018-09-29 14:46:57,085 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:57,085 [salt.state       :1941][INFO    ][14251] Completed state [sysfsutils] at time 14:46:57.085208 duration_in_ms=7.783
2018-09-29 14:46:57,085 [salt.state       :1770][INFO    ][14251] Running state [sg3-utils] at time 14:46:57.085407
2018-09-29 14:46:57,085 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [sg3-utils]
2018-09-29 14:46:57,092 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:57,093 [salt.state       :1941][INFO    ][14251] Completed state [sg3-utils] at time 14:46:57.093083 duration_in_ms=7.676
2018-09-29 14:46:57,093 [salt.state       :1770][INFO    ][14251] Running state [python-cinder] at time 14:46:57.093281
2018-09-29 14:46:57,093 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [python-cinder]
2018-09-29 14:46:57,100 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:57,100 [salt.state       :1941][INFO    ][14251] Completed state [python-cinder] at time 14:46:57.100830 duration_in_ms=7.549
2018-09-29 14:46:57,101 [salt.state       :1770][INFO    ][14251] Running state [python-mysqldb] at time 14:46:57.101024
2018-09-29 14:46:57,101 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [python-mysqldb]
2018-09-29 14:46:57,108 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:57,108 [salt.state       :1941][INFO    ][14251] Completed state [python-mysqldb] at time 14:46:57.108567 duration_in_ms=7.543
2018-09-29 14:46:57,108 [salt.state       :1770][INFO    ][14251] Running state [p7zip] at time 14:46:57.108770
2018-09-29 14:46:57,108 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [p7zip]
2018-09-29 14:46:57,116 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:57,116 [salt.state       :1941][INFO    ][14251] Completed state [p7zip] at time 14:46:57.116346 duration_in_ms=7.576
2018-09-29 14:46:57,116 [salt.state       :1770][INFO    ][14251] Running state [gettext-base] at time 14:46:57.116537
2018-09-29 14:46:57,116 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [gettext-base]
2018-09-29 14:46:57,123 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:57,123 [salt.state       :1941][INFO    ][14251] Completed state [gettext-base] at time 14:46:57.123936 duration_in_ms=7.399
2018-09-29 14:46:57,124 [salt.state       :1770][INFO    ][14251] Running state [python-memcache] at time 14:46:57.124131
2018-09-29 14:46:57,124 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [python-memcache]
2018-09-29 14:46:57,131 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:57,131 [salt.state       :1941][INFO    ][14251] Completed state [python-memcache] at time 14:46:57.131617 duration_in_ms=7.486
2018-09-29 14:46:57,131 [salt.state       :1770][INFO    ][14251] Running state [python-pycadf] at time 14:46:57.131810
2018-09-29 14:46:57,132 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [python-pycadf]
2018-09-29 14:46:57,139 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:57,139 [salt.state       :1941][INFO    ][14251] Completed state [python-pycadf] at time 14:46:57.139544 duration_in_ms=7.734
2018-09-29 14:46:57,139 [salt.state       :1770][INFO    ][14251] Running state [cinder_volume_ssl_mysql] at time 14:46:57.139921
2018-09-29 14:46:57,140 [salt.state       :1803][INFO    ][14251] Executing state test.show_notification for [cinder_volume_ssl_mysql]
2018-09-29 14:46:57,140 [salt.state       :290 ][INFO    ][14251] Running cinder._ssl.volume_mysql
2018-09-29 14:46:57,140 [salt.state       :1941][INFO    ][14251] Completed state [cinder_volume_ssl_mysql] at time 14:46:57.140506 duration_in_ms=0.586
2018-09-29 14:46:57,140 [salt.state       :1770][INFO    ][14251] Running state [cinder_volume_ssl_rabbitmq] at time 14:46:57.140855
2018-09-29 14:46:57,141 [salt.state       :1803][INFO    ][14251] Executing state test.show_notification for [cinder_volume_ssl_rabbitmq]
2018-09-29 14:46:57,141 [salt.state       :290 ][INFO    ][14251] Running cinder._ssl.rabbitmq
2018-09-29 14:46:57,141 [salt.state       :1941][INFO    ][14251] Completed state [cinder_volume_ssl_rabbitmq] at time 14:46:57.141419 duration_in_ms=0.563
2018-09-29 14:46:57,143 [salt.state       :1770][INFO    ][14251] Running state [/var/lock/cinder] at time 14:46:57.143596
2018-09-29 14:46:57,143 [salt.state       :1803][INFO    ][14251] Executing state file.directory for [/var/lock/cinder]
2018-09-29 14:46:57,144 [salt.state       :290 ][INFO    ][14251] Directory /var/lock/cinder is in the correct state
Directory /var/lock/cinder updated
2018-09-29 14:46:57,144 [salt.state       :1941][INFO    ][14251] Completed state [/var/lock/cinder] at time 14:46:57.144854 duration_in_ms=1.258
2018-09-29 14:46:57,145 [salt.state       :1770][INFO    ][14251] Running state [/etc/cinder/cinder.conf] at time 14:46:57.145399
2018-09-29 14:46:57,145 [salt.state       :1803][INFO    ][14251] Executing state file.managed for [/etc/cinder/cinder.conf]
2018-09-29 14:46:57,271 [salt.state       :290 ][INFO    ][14251] File /etc/cinder/cinder.conf is in the correct state
2018-09-29 14:46:57,271 [salt.state       :1941][INFO    ][14251] Completed state [/etc/cinder/cinder.conf] at time 14:46:57.271763 duration_in_ms=126.364
2018-09-29 14:46:57,272 [salt.state       :1770][INFO    ][14251] Running state [/etc/cinder/api-paste.ini] at time 14:46:57.272102
2018-09-29 14:46:57,272 [salt.state       :1803][INFO    ][14251] Executing state file.managed for [/etc/cinder/api-paste.ini]
2018-09-29 14:46:57,334 [salt.state       :290 ][INFO    ][14251] File /etc/cinder/api-paste.ini is in the correct state
2018-09-29 14:46:57,334 [salt.state       :1941][INFO    ][14251] Completed state [/etc/cinder/api-paste.ini] at time 14:46:57.334209 duration_in_ms=62.107
2018-09-29 14:46:57,334 [salt.state       :1770][INFO    ][14251] Running state [/etc/default/cinder-volume] at time 14:46:57.334592
2018-09-29 14:46:57,334 [salt.state       :1803][INFO    ][14251] Executing state file.managed for [/etc/default/cinder-volume]
2018-09-29 14:46:57,353 [salt.state       :290 ][INFO    ][14251] File /etc/default/cinder-volume is in the correct state
2018-09-29 14:46:57,353 [salt.state       :1941][INFO    ][14251] Completed state [/etc/default/cinder-volume] at time 14:46:57.353727 duration_in_ms=19.134
2018-09-29 14:46:57,355 [salt.state       :1770][INFO    ][14251] Running state [cinder-volume] at time 14:46:57.355365
2018-09-29 14:46:57,355 [salt.state       :1803][INFO    ][14251] Executing state service.running for [cinder-volume]
2018-09-29 14:46:57,356 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'status', 'cinder-volume.service', '-n', '0'] in directory '/root'
2018-09-29 14:46:57,369 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'is-active', 'cinder-volume.service'] in directory '/root'
2018-09-29 14:46:57,376 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'is-enabled', 'cinder-volume.service'] in directory '/root'
2018-09-29 14:46:57,383 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'cinder-volume.service'] in directory '/root'
2018-09-29 14:46:57,423 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'is-active', 'cinder-volume.service'] in directory '/root'
2018-09-29 14:46:57,437 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'is-enabled', 'cinder-volume.service'] in directory '/root'
2018-09-29 14:46:57,445 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'is-enabled', 'cinder-volume.service'] in directory '/root'
2018-09-29 14:46:57,452 [salt.state       :290 ][INFO    ][14251] {'cinder-volume': True}
2018-09-29 14:46:57,452 [salt.state       :1941][INFO    ][14251] Completed state [cinder-volume] at time 14:46:57.452366 duration_in_ms=97.001
2018-09-29 14:46:57,452 [salt.state       :1770][INFO    ][14251] Running state [open-iscsi] at time 14:46:57.452871
2018-09-29 14:46:57,453 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [open-iscsi]
2018-09-29 14:46:57,460 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:57,461 [salt.state       :1941][INFO    ][14251] Completed state [open-iscsi] at time 14:46:57.461126 duration_in_ms=8.255
2018-09-29 14:46:57,461 [salt.state       :1770][INFO    ][14251] Running state [tgt] at time 14:46:57.461471
2018-09-29 14:46:57,461 [salt.state       :1803][INFO    ][14251] Executing state pkg.installed for [tgt]
2018-09-29 14:46:57,468 [salt.state       :290 ][INFO    ][14251] All specified packages are already installed
2018-09-29 14:46:57,468 [salt.state       :1941][INFO    ][14251] Completed state [tgt] at time 14:46:57.468357 duration_in_ms=6.886
2018-09-29 14:46:57,469 [salt.state       :1770][INFO    ][14251] Running state [open-iscsi] at time 14:46:57.468959
2018-09-29 14:46:57,469 [salt.state       :1803][INFO    ][14251] Executing state service.running for [open-iscsi]
2018-09-29 14:46:57,469 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'status', 'open-iscsi.service', '-n', '0'] in directory '/root'
2018-09-29 14:46:57,475 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'is-active', 'open-iscsi.service'] in directory '/root'
2018-09-29 14:46:57,481 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'is-enabled', 'open-iscsi.service'] in directory '/root'
2018-09-29 14:46:57,487 [salt.state       :290 ][INFO    ][14251] The service open-iscsi is already running
2018-09-29 14:46:57,487 [salt.state       :1941][INFO    ][14251] Completed state [open-iscsi] at time 14:46:57.487599 duration_in_ms=18.626
2018-09-29 14:46:57,488 [salt.state       :1770][INFO    ][14251] Running state [tgt] at time 14:46:57.488017
2018-09-29 14:46:57,488 [salt.state       :1803][INFO    ][14251] Executing state service.running for [tgt]
2018-09-29 14:46:57,488 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'status', 'tgt.service', '-n', '0'] in directory '/root'
2018-09-29 14:46:57,495 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'is-active', 'tgt.service'] in directory '/root'
2018-09-29 14:46:57,500 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'is-enabled', 'tgt.service'] in directory '/root'
2018-09-29 14:46:57,506 [salt.state       :290 ][INFO    ][14251] The service tgt is already running
2018-09-29 14:46:57,506 [salt.state       :1941][INFO    ][14251] Completed state [tgt] at time 14:46:57.506376 duration_in_ms=18.36
2018-09-29 14:46:57,506 [salt.state       :1770][INFO    ][14251] Running state [iscsid] at time 14:46:57.506794
2018-09-29 14:46:57,507 [salt.state       :1803][INFO    ][14251] Executing state service.running for [iscsid]
2018-09-29 14:46:57,507 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'status', 'iscsid.service', '-n', '0'] in directory '/root'
2018-09-29 14:46:57,513 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'is-active', 'iscsid.service'] in directory '/root'
2018-09-29 14:46:57,519 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14251] Executing command ['systemctl', 'is-enabled', 'iscsid.service'] in directory '/root'
2018-09-29 14:46:57,524 [salt.state       :290 ][INFO    ][14251] The service iscsid is already running
2018-09-29 14:46:57,525 [salt.state       :1941][INFO    ][14251] Completed state [iscsid] at time 14:46:57.525058 duration_in_ms=18.263
2018-09-29 14:46:57,526 [salt.minion      :1708][INFO    ][14251] Returning information for job: 20180929144651739335
2018-09-29 14:48:56,427 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command state.sls with jid 20180929144856460747
2018-09-29 14:48:56,437 [salt.minion      :1431][INFO    ][14567] Starting a new job with PID 14567
2018-09-29 14:48:59,406 [salt.state       :905 ][INFO    ][14567] Loading fresh modules for state activity
2018-09-29 14:48:59,453 [salt.fileclient  :1215][INFO    ][14567] Fetching file from saltenv 'base', ** done ** 'neutron/gateway.sls'
2018-09-29 14:48:59,496 [salt.fileclient  :1215][INFO    ][14567] Fetching file from saltenv 'base', ** done ** 'neutron/map.jinja'
2018-09-29 14:48:59,554 [salt.fileclient  :1215][INFO    ][14567] Fetching file from saltenv 'base', ** done ** 'neutron/opendaylight/client.sls'
2018-09-29 14:48:59,610 [salt.fileclient  :1215][INFO    ][14567] Fetching file from saltenv 'base', ** done ** 'neutron/_ssl/rabbitmq.sls'
2018-09-29 14:49:00,663 [salt.state       :1770][INFO    ][14567] Running state [neutron-dhcp-agent] at time 14:49:00.663272
2018-09-29 14:49:00,663 [salt.state       :1803][INFO    ][14567] Executing state pkg.installed for [neutron-dhcp-agent]
2018-09-29 14:49:00,664 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:49:01,022 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['apt-cache', '-q', 'policy', 'neutron-dhcp-agent'] in directory '/root'
2018-09-29 14:49:01,086 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-29 14:49:02,538 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:49:02,556 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'neutron-dhcp-agent'] in directory '/root'
2018-09-29 14:49:06,538 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144906570191
2018-09-29 14:49:06,547 [salt.minion      :1431][INFO    ][15330] Starting a new job with PID 15330
2018-09-29 14:49:06,559 [salt.minion      :1708][INFO    ][15330] Returning information for job: 20180929144906570191
2018-09-29 14:49:13,298 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:49:13,328 [salt.state       :290 ][INFO    ][14567] Made the following changes:
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-neutron-fwaas' changed from 'absent' to '2:11.0.1-2~u16.04+mcp14'
'python2.7-pymongo' changed from 'absent' to '1'
'libipset3' changed from 'absent' to '6.29-1'
'python2.7-bson' changed from 'absent' to '1'
'python-os-xenapi' changed from 'absent' to '0.2.0-1~u16.04+mcp3'
'python-bson-ext' changed from 'absent' to '3.2-1build1'
'python-os-client-config' changed from 'absent' to '1.28.0-1~u16.04+mcp2'
'python-logutils' changed from 'absent' to '0.3.3-5'
'ipset-6.29' changed from 'absent' to '1'
'neutron-dhcp-agent' changed from 'absent' to '2:11.0.5-2~u16.04+mcp179'
'neutron-common' changed from 'absent' to '2:11.0.5-2~u16.04+mcp179'
'python-designateclient' changed from 'absent' to '2.7.0-1~u16.04+mcp5'
'dnsmasq-utils' changed from 'absent' to '2.78-1~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.5.0-1~u16.04+mcp19'
'python2.7-waitress' changed from 'absent' to '1'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-neutron-lib' changed from 'absent' to '1.9.1-1~u16.04+mcp9'
'python2.7-pymongo-ext' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'python-gridfs' changed from 'absent' to '3.2-1build1'
'python2.7-neutron' changed from 'absent' to '1'
'ipset' changed from 'absent' to '6.29-1'
'python-ovsdbapp' changed from 'absent' to '0.4.3-1~u16.04+mcp0'
'python-pymongo-ext' changed from 'absent' to '3.2-1build1'
'python2.7-gridfs' changed from 'absent' to '1'
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-oslo.cache' changed from 'absent' to '1.25.1-1~u16.04+mcp6'
'python2.7-bson-ext' changed from 'absent' to '1'
'python-weakrefmethod' changed from 'absent' to '1.0.3-2~u16.04+mcp1'
'python-neutron' changed from 'absent' to '2:11.0.5-2~u16.04+mcp179'
'python-ryu' changed from 'absent' to '4.15-1~u16.04+mcp2'
'python-pymongo' changed from 'absent' to '3.2-1build1'
'python-pyroute2' changed from 'absent' to '0.4.21-0.1~u16.04+mcp1'
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'python-osc-lib' changed from 'absent' to '1.7.0-1~u16.04+mcp2'
'python-bson' changed from 'absent' to '3.2-1build1'
'python-tinyrpc' changed from 'absent' to '0.5-1.1~u16.04+mcp2'
'python-webtest' changed from 'absent' to '2.0.18-1ubuntu1'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'neutron-metadata-agent' changed from 'absent' to '2:11.0.5-2~u16.04+mcp179'
'python-openvswitch' changed from 'absent' to '2.8.1-0ubuntu0.17.10.2~cloud0'
'python2.7-pyroute2' changed from 'absent' to '1'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python2.7-ryu' changed from 'absent' to '1'

2018-09-29 14:49:13,346 [salt.state       :905 ][INFO    ][14567] Loading fresh modules for state activity
2018-09-29 14:49:13,376 [salt.state       :1941][INFO    ][14567] Completed state [neutron-dhcp-agent] at time 14:49:13.376121 duration_in_ms=12712.85
2018-09-29 14:49:13,380 [salt.state       :1770][INFO    ][14567] Running state [neutron-metadata-agent] at time 14:49:13.380446
2018-09-29 14:49:13,380 [salt.state       :1803][INFO    ][14567] Executing state pkg.installed for [neutron-metadata-agent]
2018-09-29 14:49:13,990 [salt.state       :290 ][INFO    ][14567] All specified packages are already installed
2018-09-29 14:49:13,991 [salt.state       :1941][INFO    ][14567] Completed state [neutron-metadata-agent] at time 14:49:13.991060 duration_in_ms=610.613
2018-09-29 14:49:13,991 [salt.state       :1770][INFO    ][14567] Running state [neutron_gateway_ssl_rabbitmq] at time 14:49:13.991889
2018-09-29 14:49:13,992 [salt.state       :1803][INFO    ][14567] Executing state test.show_notification for [neutron_gateway_ssl_rabbitmq]
2018-09-29 14:49:13,994 [salt.state       :290 ][INFO    ][14567] Running neutron._ssl.rabbitmq
2018-09-29 14:49:13,994 [salt.state       :1941][INFO    ][14567] Completed state [neutron_gateway_ssl_rabbitmq] at time 14:49:13.994833 duration_in_ms=2.943
2018-09-29 14:49:13,995 [salt.state       :1770][INFO    ][14567] Running state [haproxy] at time 14:49:13.995501
2018-09-29 14:49:13,995 [salt.state       :1803][INFO    ][14567] Executing state service.dead for [haproxy]
2018-09-29 14:49:13,996 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-09-29 14:49:14,004 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-09-29 14:49:14,010 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-09-29 14:49:14,016 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'haproxy.service'] in directory '/root'
2018-09-29 14:49:14,072 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-09-29 14:49:14,079 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-09-29 14:49:14,085 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-09-29 14:49:14,094 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'haproxy.service'] in directory '/root'
2018-09-29 14:49:14,322 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-09-29 14:49:14,333 [salt.state       :290 ][INFO    ][14567] {'haproxy': True}
2018-09-29 14:49:14,333 [salt.state       :1941][INFO    ][14567] Completed state [haproxy] at time 14:49:14.333890 duration_in_ms=338.389
2018-09-29 14:49:14,336 [salt.state       :1770][INFO    ][14567] Running state [/etc/neutron/neutron.conf] at time 14:49:14.336376
2018-09-29 14:49:14,336 [salt.state       :1803][INFO    ][14567] Executing state file.managed for [/etc/neutron/neutron.conf]
2018-09-29 14:49:14,481 [salt.fileclient  :1215][INFO    ][14567] Fetching file from saltenv 'base', ** done ** 'neutron/files/pike/neutron-generic.conf'
2018-09-29 14:49:14,588 [salt.state       :290 ][INFO    ][14567] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-core_plugin = ml2
 
 #
 # From neutron
@@ -8,8 +8,9 @@
 # Where to store Neutron state files. This directory must be writable by the
 # agent. (string value)
 #state_path = /var/lib/neutron
-
-# The host IP to bind to. (unknown value)
+state_path = /var/lib/neutron
+
+# The host IP to bind to (string value)
 #bind_host = 0.0.0.0
 
 # The port to bind to (port value)
@@ -26,9 +27,15 @@
 
 # The type of authentication to use (string value)
 #auth_strategy = keystone
-
-# The core plugin Neutron will use (string value)
-#core_plugin = <None>
+auth_strategy = keystone
+
+
+
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+
+service_plugins = odl-router_v2, metering
+
+
 
 # The service plugins Neutron will use (list value)
 #service_plugins =
@@ -59,6 +66,12 @@
 # Maximum number of host routes per subnet (integer value)
 #max_subnet_host_routes = 20
 
+# DEPRECATED: Maximum number of fixed ips per port. This option is deprecated
+# and will be removed in the Ocata release. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#max_fixed_ips_per_port = 5
+
 # Enables IPv6 Prefix Delegation for automatic subnet CIDR allocation. Set to
 # True to enable IPv6 Prefix Delegation for subnet allocation in a PD-capable
 # environment. Users making subnet creation requests for IPv6 subnets without
@@ -70,6 +83,7 @@
 # DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
 # lease times. (integer value)
 #dhcp_lease_duration = 86400
+dhcp_lease_duration = 600
 
 # Domain to use for building the hostnames (string value)
 #dns_domain = openstacklocal
@@ -84,23 +98,22 @@
 # MUST be set to False if Neutron is being used in conjunction with Nova
 # security groups. (boolean value)
 #allow_overlapping_ips = false
+allow_overlapping_ips = True
 
 # Hostname to be used by the Neutron server, agents and services running on
 # this machine. All the agents and services running on this machine must use
-# the same host value. (unknown value)
+# the same host value. (string value)
 #host = example.domain
 
-# This string is prepended to the normal URL that is returned in links to the
-# OpenStack Network API. If it is empty (the default), the URLs are returned
-# unchanged. (string value)
-#network_link_prefix = <None>
 
 # Send notification to nova when port status changes (boolean value)
 #notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = True
 
 # Send notification to nova when port data (fixed_ips/floatingip) changes so
 # nova can update its cache. (boolean value)
 #notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = True
 
 # Number of seconds between sending events to nova if there are any events to
 # send. (integer value)
@@ -114,13 +127,10 @@
 # networks. (boolean value)
 #vlan_transparent = false
 
-# DEPRECATED: This will choose the web framework in which to run the Neutron
-# API server. 'pecan' is a new rewrite of the API routing components. (string
-# value)
+# This will choose the web framework in which to run the Neutron API server.
+# 'pecan' is a new experimental rewrite of the API server. (string value)
 # Allowed values: legacy, pecan
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#web_framework = pecan
+#web_framework = legacy
 
 # MTU of the underlying physical network. Neutron uses this value to calculate
 # MTU for all virtual network components. For flat and VLAN networks, neutron
@@ -129,6 +139,7 @@
 # value. Defaults to 1500, the standard value for Ethernet. (integer value)
 # Deprecated group/name - [ml2]/segment_mtu
 #global_physnet_mtu = 1500
+global_physnet_mtu = 1500
 
 # Number of backlog requests to configure the socket with (integer value)
 #backlog = 4096
@@ -175,6 +186,14 @@
 # Group (gid or name) running metadata proxy after its initialization (if
 # empty: agent effective group). (string value)
 #metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy. It should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# copytruncate logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name. (boolean value)
+#metadata_proxy_watch_log = <None>
 
 #
 # From neutron.db
@@ -239,10 +258,6 @@
 # Only admin can override. (boolean value)
 #router_distributed = false
 
-# Determine if setup is configured for DVR. If False, DVR API extension will be
-# disabled. (boolean value)
-#enable_dvr = true
-
 # Driver to use for scheduling router to a default L3 agent (string value)
 #router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
 
@@ -288,6 +303,13 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -327,12 +349,6 @@
 # is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
@@ -361,7 +377,7 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -394,6 +410,7 @@
 #
 
 # Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
 #rpc_conn_pool_size = 30
 
 # The pool size limit for connections expiration policy (integer value)
@@ -404,24 +421,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -431,24 +454,30 @@
 # upper bound for the linger period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
+zmq_linger = 30
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -463,20 +492,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -540,18 +573,21 @@
 # priority then the default publishers list taken from the matchmaker. (list
 # value)
 #subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+agent_down_time = 30
+
+# Size of executor thread pool. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
+executor_thread_pool_size = 70
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
+rpc_response_timeout=120
 
 # A URL representing the messaging driver to use and its full configuration.
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -599,7 +635,6 @@
 
 
 [agent]
-root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
 
 #
 # From neutron.agent
@@ -609,7 +644,7 @@
 # /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
 # 'sudo' to skip the filtering and just run the command directly. (string
 # value)
-#root_helper = sudo
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
 
 # Use the root helper when listing the namespaces on a system. This may not be
 # required depending on the security configuration. If the root helper is not
@@ -626,6 +661,7 @@
 # agent_down_time, best if it is half or less than agent_down_time. (floating
 # point value)
 #report_interval = 30
+report_interval = 10
 
 # Log agent heartbeats (boolean value)
 #log_agent_heartbeats = false
@@ -652,6 +688,7 @@
 
 # Availability zone of this node (string value)
 #availability_zone = nova
+availability_zone = nova
 
 
 [cors]
@@ -683,8 +720,36 @@
 #allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
 
 
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
 [database]
-connection = sqlite:////var/lib/neutron/neutron.sqlite
 
 #
 # From neutron.db
@@ -698,7 +763,16 @@
 # From oslo.db
 #
 
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect
+# the database.
+#sqlite_db = oslo.sqlite
+
 # If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
 #sqlite_synchronous = true
 
 # The back end to use for the database. (string value)
@@ -710,7 +784,7 @@
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-#connection = <None>
+connection = sqlite:////var/lib/neutron/neutron.sqlite
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
@@ -722,10 +796,6 @@
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
 # Timeout before idle SQL connections are reaped. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
@@ -803,10 +873,10 @@
 # Complete "public" Identity API endpoint. This endpoint should not be an
 # "admin" endpoint, as it should be accessible by all end users.
 # Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should ideally be unversioned, client support in the
-# wild varies. If you're using a versioned v2 endpoint here, then this should
-# *not* be the same endpoint the service user utilizes for validating tokens,
-# because normal end users may not be able to reach that endpoint. (string
+# Although this endpoint should  ideally be unversioned, client support in the
+# wild varies.  If you're using a versioned v2 endpoint here, then this  should
+# *not* be the same endpoint the service user utilizes  for validating tokens,
+# because normal end users may not be  able to reach that endpoint. (string
 # value)
 #auth_uri = <None>
 
@@ -1117,11 +1187,11 @@
 #project_domain_name = <None>
 
 # Project ID to scope to (string value)
-# Deprecated group/name - [nova]/tenant_id
+# Deprecated group/name - [nova]/tenant-id
 #project_id = <None>
 
 # Project name to scope to (string value)
-# Deprecated group/name - [nova]/tenant_name
+# Deprecated group/name - [nova]/tenant-name
 #project_name = <None>
 
 # Tenant ID (string value)
@@ -1146,7 +1216,7 @@
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [nova]/user_name
+# Deprecated group/name - [nova]/user-name
 #username = <None>
 
 
@@ -1157,6 +1227,7 @@
 #
 
 # Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
 #disable_process_locking = false
 
 # Directory to use for lock files.  For security, the specified directory
@@ -1165,7 +1236,9 @@
 # in the environment, use the Python tempfile.gettempdir function to find a
 # suitable location. If external locks are used, a lock path must be set.
 # (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
 #lock_path = /tmp
+lock_path = $state_path/lock
 
 
 [oslo_messaging_amqp]
@@ -1176,72 +1249,61 @@
 
 # Name for the AMQP container. must be globally unique. Defaults to a generated
 # UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
 #container_name = <None>
 
 # Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
 #idle_timeout = 0
 
 # Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
 #trace = false
 
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
 # CA certificate PEM file used to verify the server's certificate (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
 #ssl_ca_file =
 
 # Self-identifying certificate PEM file for client authentication (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
 #ssl_cert_file =
 
 # Private key PEM file used to sign ssl_cert_file certificate (optional)
 # (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
 #ssl_key_file =
 
 # Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
 #ssl_key_password = <None>
 
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
 # DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Not applicable - not a SSL server
 #allow_insecure_clients = false
 
 # Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
 #sasl_mechanisms =
 
 # Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
 #sasl_config_dir =
 
 # Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
 #sasl_config_name =
 
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
 #username =
 
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
 #password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
@@ -1295,21 +1357,16 @@
 # otherwise use routable addressing (string value)
 #addressing_mode = dynamic
 
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
 # address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
 #server_request_prefix = exclusive
 
 # address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
 #broadcast_prefix = broadcast
 
 # address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
 #group_request_prefix = unicast
 
 # Address prefix for all generated RPC addresses (string value)
@@ -1397,7 +1454,7 @@
 # Max fetch bytes of Kafka consumer (integer value)
 #kafka_max_fetch_bytes = 1048576
 
-# Default timeout(s) for Kafka consumers (floating point value)
+# Default timeout(s) for Kafka consumers (integer value)
 #kafka_consumer_timeout = 1.0
 
 # Pool Size for Kafka Consumers (integer value)
@@ -1431,7 +1488,7 @@
 # messaging, messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
-
+driver = messagingv2
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
 # Deprecated group/name - [DEFAULT]/notification_transport_url
@@ -1442,11 +1499,6 @@
 # Deprecated group/name - [DEFAULT]/notification_topics
 #topics = notifications
 
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
 
 [oslo_messaging_rabbit]
 
@@ -1460,31 +1512,30 @@
 #amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
 #amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
 
 # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
 # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
 # distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
 
 # SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
 
 # SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
 
 # SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
 #kombu_reconnect_delay = 1.0
 
 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
@@ -1504,6 +1555,7 @@
 
 # DEPRECATED: The RabbitMQ broker address where a single node is used. (string
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1513,24 +1565,32 @@
 # value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_port = 5672
 
 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_hosts = $rabbit_host:$rabbit_port
 
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
 # DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_userid = guest
 
 # DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1538,9 +1598,11 @@
 
 # The RabbitMQ login method. (string value)
 # Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
 #rabbit_login_method = AMQPLAIN
 
 # DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1548,10 +1610,13 @@
 
 # How frequently to retry connecting with RabbitMQ. (integer value)
 #rabbit_retry_interval = 1
+rabbit_retry_interval = 1
 
 # How long to backoff for between retries when connecting to RabbitMQ. (integer
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
 #rabbit_retry_backoff = 2
+rabbit_retry_backoff = 2
 
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
 # (integer value)
@@ -1559,6 +1624,7 @@
 
 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
 # (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #rabbit_max_retries = 0
@@ -1569,6 +1635,7 @@
 # If you just want to make sure that all queues (except those with auto-
 # generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
 # HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
 #rabbit_ha_queues = false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
@@ -1579,18 +1646,21 @@
 
 # Specifies the number of messages to prefetch. Setting to zero allows
 # unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
+#rabbit_qos_prefetch_count = 0
 
 # Number of seconds after which the Rabbit broker is considered down if
 # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
 # value)
 #heartbeat_timeout_threshold = 60
+heartbeat_timeout_threshold = 0
 
 # How often times during the heartbeat_timeout_threshold we check the
 # heartbeat. (integer value)
 #heartbeat_rate = 2
+heartbeat_rate = 2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
 #fake_rabbit = false
 
 # Maximum number of channels to allow (integer value)
@@ -1601,6 +1671,9 @@
 
 # How often to send heartbeats for consumer's connections (integer value)
 #heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
 
 # Arguments passed to ssl.wrap_socket (dict value)
 #ssl_options = <None>
@@ -1706,24 +1779,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -1736,21 +1815,26 @@
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -1765,20 +1849,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -1862,9 +1950,11 @@
 #
 
 # The file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
 #policy_file = policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
 #policy_default_rule = default
 
 # Directories where policy configuration files are stored. They can be relative
@@ -1872,7 +1962,21 @@
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
 #policy_dirs = policy.d
+
+
+[qos]
+
+#
+# From neutron.qos
+#
+
+# DEPRECATED: Drivers list to use to send the update notification. This option
+# will be unused in Pike. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#notification_drivers = message_queue
 
 
 [quotas]
@@ -1887,15 +1991,15 @@
 
 # Number of networks allowed per tenant. A negative value means unlimited.
 # (integer value)
-#quota_network = 100
+#quota_network = 10
 
 # Number of subnets allowed per tenant, A negative value means unlimited.
 # (integer value)
-#quota_subnet = 100
+#quota_subnet = 10
 
 # Number of ports allowed per tenant. A negative value means unlimited.
 # (integer value)
-#quota_port = 500
+#quota_port = 50
 
 # Default driver to use for quota checks. (string value)
 #quota_driver = neutron.db.quota.driver.DbQuotaDriver
@@ -1952,3 +2056,6 @@
 # Sets the list of available ciphers. value should be a string in the OpenSSL
 # cipher list format. (string value)
 #ciphers = <None>
+
+[ovs]
+ovsdb_connection = tcp:127.0.0.1:6639

2018-09-29 14:49:14,589 [salt.state       :1941][INFO    ][14567] Completed state [/etc/neutron/neutron.conf] at time 14:49:14.589030 duration_in_ms=252.653
2018-09-29 14:49:14,589 [salt.state       :1770][INFO    ][14567] Running state [python-networking-odl] at time 14:49:14.589211
2018-09-29 14:49:14,589 [salt.state       :1803][INFO    ][14567] Executing state pkg.installed for [python-networking-odl]
2018-09-29 14:49:14,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:49:14,624 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-networking-odl'] in directory '/root'
2018-09-29 14:49:16,556 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:49:16,585 [salt.state       :290 ][INFO    ][14567] Made the following changes:
'python-networking-odl' changed from 'absent' to '1:11.0.0-1~u16.04+mcp55'
'python-websocket' changed from 'absent' to '0.32.0-1.1~u16.04+mcp2'

2018-09-29 14:49:16,603 [salt.state       :905 ][INFO    ][14567] Loading fresh modules for state activity
2018-09-29 14:49:16,631 [salt.state       :1941][INFO    ][14567] Completed state [python-networking-odl] at time 14:49:16.631052 duration_in_ms=2041.841
2018-09-29 14:49:16,633 [salt.state       :1770][INFO    ][14567] Running state [ovs-vsctl set-manager tcp:192.168.10.39:6640 ptcp:6639:127.0.0.1] at time 14:49:16.633692
2018-09-29 14:49:16,633 [salt.state       :1803][INFO    ][14567] Executing state cmd.run for [ovs-vsctl set-manager tcp:192.168.10.39:6640 ptcp:6639:127.0.0.1]
2018-09-29 14:49:16,636 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command 'ovs-vsctl get-manager | fgrep -qx tcp:192.168.10.39:6640' in directory '/root'
2018-09-29 14:49:16,644 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command 'ovs-vsctl set-manager tcp:192.168.10.39:6640 ptcp:6639:127.0.0.1' in directory '/root'
2018-09-29 14:49:16,654 [salt.state       :290 ][INFO    ][14567] {'pid': 16786, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-09-29 14:49:16,654 [salt.state       :1941][INFO    ][14567] Completed state [ovs-vsctl set-manager tcp:192.168.10.39:6640 ptcp:6639:127.0.0.1] at time 14:49:16.654291 duration_in_ms=20.598
2018-09-29 14:49:16,654 [salt.state       :1770][INFO    ][14567] Running state [neutron-odl-ovs-hostconfig --noovs_dpdk --local_ip=192.168.2.6 --bridge_mapping=physnet1:br-floating] at time 14:49:16.654862
2018-09-29 14:49:16,655 [salt.state       :1803][INFO    ][14567] Executing state cmd.run for [neutron-odl-ovs-hostconfig --noovs_dpdk --local_ip=192.168.2.6 --bridge_mapping=physnet1:br-floating]
2018-09-29 14:49:16,655 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command 'neutron-odl-ovs-hostconfig --noovs_dpdk --local_ip=192.168.2.6 --bridge_mapping=physnet1:br-floating' in directory '/root'
2018-09-29 14:49:17,049 [salt.state       :290 ][INFO    ][14567] {'pid': 16788, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-09-29 14:49:17,049 [salt.state       :1941][INFO    ][14567] Completed state [neutron-odl-ovs-hostconfig --noovs_dpdk --local_ip=192.168.2.6 --bridge_mapping=physnet1:br-floating] at time 14:49:17.049485 duration_in_ms=394.622
2018-09-29 14:49:17,051 [salt.state       :1770][INFO    ][14567] Running state [/etc/neutron/dhcp_agent.ini] at time 14:49:17.051688
2018-09-29 14:49:17,051 [salt.state       :1803][INFO    ][14567] Executing state file.managed for [/etc/neutron/dhcp_agent.ini]
2018-09-29 14:49:17,092 [salt.fileclient  :1215][INFO    ][14567] Fetching file from saltenv 'base', ** done ** 'neutron/files/pike/dhcp_agent.ini'
2018-09-29 14:49:17,177 [salt.state       :290 ][INFO    ][14567] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -7,83 +8,81 @@
 # Name of Open vSwitch bridge to use (string value)
 #ovs_integration_bridge = br-int
 
-# Uses veth for an OVS interface or not. Support kernels with limited namespace
-# support (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. (boolean
-# value)
+# Uses veth for an OVS interface or not. Support kernels with limited namespace support (e.g. RHEL 6.5) so long as ovs_use_veth is set to
+# True. (boolean value)
 #ovs_use_veth = false
+
+# MTU setting for device. This option will be removed in Newton. Please use the system-wide global_physnet_mtu setting which the agents will
+# take into account when wiring VIFs. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#network_device_mtu = <None>
 
 # The driver used to manage the virtual interface. (string value)
 #interface_driver = <None>
-
-# Timeout in seconds for ovs-vsctl commands. If the timeout expires, ovs
-# commands will fail with ALARMCLOCK error. (integer value)
+interface_driver = openvswitch
+
+# Timeout in seconds for ovs-vsctl commands. If the timeout expires, ovs commands will fail with ALARMCLOCK error. (integer value)
 #ovs_vsctl_timeout = 10
 
-# The maximum number of MAC addresses to learn on a bridge managed by the
-# Neutron OVS agent. Values outside a reasonable range (10 to 1,000,000) might
-# be overridden by Open vSwitch according to the documentation. (integer value)
-#bridge_mac_table_size = 50000
 
 #
 # From neutron.dhcp.agent
 #
 
-# The DHCP agent will resync its state with Neutron to recover from any
-# transient notification or RPC errors. The interval is number of seconds
-# between attempts. (integer value)
+# The DHCP agent will resync its state with Neutron to recover from any transient notification or RPC errors. The interval is number of
+# seconds between attempts. (integer value)
 #resync_interval = 5
+resync_interval = 30
 
 # The driver used to manage the DHCP server. (string value)
 #dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
 
-# The DHCP server can assist with providing metadata support on isolated
-# networks. Setting this value to True will cause the DHCP server to append
-# specific host routes to the DHCP request. The metadata service will only be
-# activated when the subnet does not contain any router port. The guest
-# instance must be configured to request host routes via DHCP (Option 121).
-# This option doesn't have any effect when force_metadata is set to True.
-# (boolean value)
+# The DHCP server can assist with providing metadata support on isolated networks. Setting this value to True will cause the DHCP server to
+# append specific host routes to the DHCP request. The metadata service will only be activated when the subnet does not contain any router
+# port. The guest instance must be configured to request host routes via DHCP (Option 121). This option doesn't have any effect when
+# force_metadata is set to True. (boolean value)
 #enable_isolated_metadata = false
-
-# In some cases the Neutron router is not present to provide the metadata IP
-# but the DHCP server can be used to provide this info. Setting this value will
-# force the DHCP server to append specific host routes to the DHCP request. If
-# this option is set, then the metadata service will be activated for all the
-# networks. (boolean value)
+enable_isolated_metadata = True
+
+# In some cases the Neutron router is not present to provide the metadata IP but the DHCP server can be used to provide this info. Setting
+# this value will force the DHCP server to append specific host routes to the DHCP request. If this option is set, then the metadata service
+# will be activated for all the networks. (boolean value)
 #force_metadata = false
-
-# Allows for serving metadata requests coming from a dedicated metadata access
-# network whose CIDR is 169.254.169.254/16 (or larger prefix), and is connected
-# to a Neutron router from which the VMs send metadata:1 request. In this case
-# DHCP Option 121 will not be injected in VMs, as they will be able to reach
-# 169.254.169.254 through a router. This option requires
-# enable_isolated_metadata = True. (boolean value)
+force_metadata = True
+
+# Allows for serving metadata requests coming from a dedicated metadata access network whose CIDR is 169.254.169.254/16 (or larger prefix),
+# and is connected to a Neutron router from which the VMs send metadata:1 request. In this case DHCP Option 121 will not be injected in VMs,
+# as they will be able to reach 169.254.169.254 through a router. This option requires enable_isolated_metadata = True. (boolean value)
 #enable_metadata_network = false
-
-# Number of threads to use during sync process. Should not exceed connection
-# pool size configured on server. (integer value)
+enable_metadata_network = False
+
+# Number of threads to use during sync process. Should not exceed connection pool size configured on server. (integer value)
 #num_sync_threads = 4
 
 # Location to store DHCP server config files. (string value)
 #dhcp_confs = $state_path/dhcp
 
+# Domain to use for building the hostnames. This option is deprecated. It has been moved to neutron.conf as dns_domain. It will be removed
+# in a future release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#dhcp_domain = openstacklocal
+
 # Override the default dnsmasq settings with this file. (string value)
 #dnsmasq_config_file =
 
-# Comma-separated list of the DNS servers which will be used as forwarders.
-# (list value)
-#dnsmasq_dns_servers =
-
-# Base log dir for dnsmasq logging. The log contains DHCP and DNS log
-# information and is useful for debugging issues with either DHCP or DNS. If
-# this section is null, disable dnsmasq log. (string value)
+# Comma-separated list of the DNS servers which will be used as forwarders. (list value)
+# Deprecated group/name - [DEFAULT]/dnsmasq_dns_server
+#dnsmasq_dns_servers = <None>
+
+# Base log dir for dnsmasq logging. The log contains DHCP and DNS log information and is useful for debugging issues with either DHCP or
+# DNS. If this section is null, disable dnsmasq log. (string value)
 #dnsmasq_base_log_dir = <None>
 
-# Enables the dnsmasq service to provide name resolution for instances via DNS
-# resolvers on the host running the DHCP agent. Effectively removes the '--no-
-# resolv' option from the dnsmasq process arguments. Adding custom DNS
-# resolvers to the 'dnsmasq_dns_servers' option disables this feature. (boolean
-# value)
+# Enables the dnsmasq service to provide name resolution for instances via DNS resolvers on the host running the DHCP agent. Effectively
+# removes the '--no-resolv' option from the dnsmasq process arguments. Adding custom DNS resolvers to the 'dnsmasq_dns_servers' option
+# disables this feature. (boolean value)
 #dnsmasq_local_resolv = false
 
 # Limit number of leases to prevent a denial-of-service. (integer value)
@@ -96,133 +95,95 @@
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
 #debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
+debug = False
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Deprecated group/name - [DEFAULT]/log_config
 #log_config_append = <None>
 
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths. This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
 #watch_log_file = false
 
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined. (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
 # Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message. (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message. (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-
-[agent]
-
-#
-# From neutron.az.agent
-#
-
-# Availability zone of this node (string value)
-#availability_zone = nova
+root_helper=sudo neutron-rootwrap /etc/neutron/rootwrap.conf
+state_path=/var/lib/neutron
+
+
+[AGENT]
 
 #
 # From neutron.base.agent
 #
 
-# Seconds between nodes reporting state to server; should be less than
-# agent_down_time, best if it is half or less than agent_down_time. (floating
-# point value)
+# Seconds between nodes reporting state to server; should be less than agent_down_time, best if it is half or less than agent_down_time.
+# (floating point value)
 #report_interval = 30
 
 # Log agent heartbeats (boolean value)
 #log_agent_heartbeats = false
-
 
 [ovs]
 
@@ -238,3 +199,4 @@
 # when monitoring and used for the all ovsdb commands when native
 # ovsdb_interface is enabled (string value)
 #ovsdb_connection = tcp:127.0.0.1:6640
+

2018-09-29 14:49:17,178 [salt.state       :1941][INFO    ][14567] Completed state [/etc/neutron/dhcp_agent.ini] at time 14:49:17.178237 duration_in_ms=126.549
2018-09-29 14:49:17,178 [salt.state       :1770][INFO    ][14567] Running state [/etc/neutron/metadata_agent.ini] at time 14:49:17.178544
2018-09-29 14:49:17,178 [salt.state       :1803][INFO    ][14567] Executing state file.managed for [/etc/neutron/metadata_agent.ini]
2018-09-29 14:49:17,202 [salt.fileclient  :1215][INFO    ][14567] Fetching file from saltenv 'base', ** done ** 'neutron/files/pike/metadata_agent.ini'
2018-09-29 14:49:17,243 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144916770641
2018-09-29 14:49:17,251 [salt.minion      :1431][INFO    ][16834] Starting a new job with PID 16834
2018-09-29 14:49:17,263 [salt.minion      :1708][INFO    ][16834] Returning information for job: 20180929144916770641
2018-09-29 14:49:17,268 [salt.state       :290 ][INFO    ][14567] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -18,9 +19,9 @@
 # Certificate Authority public key (CA cert) file for ssl (string value)
 #auth_ca_cert = <None>
 
-# IP address or DNS name of Nova metadata server. (unknown value)
-# Deprecated group/name - [DEFAULT]/nova_metadata_ip
-#nova_metadata_host = 127.0.0.1
+# IP address used by Nova metadata server. (string value)
+#nova_metadata_ip = 127.0.0.1
+nova_metadata_ip = 192.168.10.35
 
 # TCP Port used by Nova metadata server. (port value)
 # Minimum value: 0
@@ -33,10 +34,12 @@
 # Server. NOTE: Nova uses the same config key, but in [neutron] section.
 # (string value)
 #metadata_proxy_shared_secret =
+metadata_proxy_shared_secret = opnfv_secret
 
 # Protocol to access nova metadata, http or https (string value)
 # Allowed values: http, https
 #nova_metadata_protocol = http
+nova_metadata_protocol = http
 
 # Allow to perform insecure SSL (https) requests to nova metadata (boolean
 # value)
@@ -59,7 +62,7 @@
 
 # Number of separate worker processes for metadata server (defaults to half of
 # the number of CPUs) (integer value)
-#metadata_workers = 16
+#metadata_workers = 2
 
 # Number of backlog requests to configure the metadata server socket with
 # (integer value)
@@ -81,6 +84,13 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+debug = False
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -120,12 +130,6 @@
 # is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
@@ -154,7 +158,7 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -214,13 +218,12 @@
 # expiration time defined for it. (integer value)
 #expiration_time = 600
 
-# Cache backend module. For eventlet-based or environments with hundreds of
-# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
-# recommended. For environments with less than 100 threaded servers, Memcached
-# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
-# environments with a single instance of the server can use the
-# dogpile.cache.memory backend. (string value)
-# Allowed values: oslo_cache.memcache_pool, oslo_cache.dict, dogpile.cache.memcached, dogpile.cache.redis, dogpile.cache.memory, dogpile.cache.null
+# Dogpile.cache backend module. It is recommended that Memcache or Redis
+# (dogpile.cache.redis) be used in production deployments. For eventlet-based
+# or highly threaded servers, Memcache with pooling (oslo_cache.memcache_pool)
+# is recommended. For low thread servers, dogpile.cache.memcached is
+# recommended. Test environments with a single instance of the server can use
+# the dogpile.cache.memory backend. (string value)
 #backend = dogpile.cache.null
 
 # Arguments supplied to the backend module. Specify this option once per

2018-09-29 14:49:17,268 [salt.state       :1941][INFO    ][14567] Completed state [/etc/neutron/metadata_agent.ini] at time 14:49:17.268554 duration_in_ms=90.009
2018-09-29 14:49:17,268 [salt.state       :1770][INFO    ][14567] Running state [/etc/default/neutron-metadata-agent] at time 14:49:17.268941
2018-09-29 14:49:17,269 [salt.state       :1803][INFO    ][14567] Executing state file.managed for [/etc/default/neutron-metadata-agent]
2018-09-29 14:49:17,292 [salt.fileclient  :1215][INFO    ][14567] Fetching file from saltenv 'base', ** done ** 'neutron/files/default'
2018-09-29 14:49:17,298 [salt.state       :290 ][INFO    ][14567] File changed:
New file
2018-09-29 14:49:17,299 [salt.state       :1941][INFO    ][14567] Completed state [/etc/default/neutron-metadata-agent] at time 14:49:17.299032 duration_in_ms=30.091
2018-09-29 14:49:17,299 [salt.state       :1770][INFO    ][14567] Running state [/etc/default/neutron-dhcp-agent] at time 14:49:17.299354
2018-09-29 14:49:17,299 [salt.state       :1803][INFO    ][14567] Executing state file.managed for [/etc/default/neutron-dhcp-agent]
2018-09-29 14:49:17,321 [salt.state       :290 ][INFO    ][14567] File changed:
New file
2018-09-29 14:49:17,322 [salt.state       :1941][INFO    ][14567] Completed state [/etc/default/neutron-dhcp-agent] at time 14:49:17.322111 duration_in_ms=22.758
2018-09-29 14:49:17,675 [salt.state       :1770][INFO    ][14567] Running state [neutron-metadata-agent] at time 14:49:17.675392
2018-09-29 14:49:17,675 [salt.state       :1803][INFO    ][14567] Executing state service.running for [neutron-metadata-agent]
2018-09-29 14:49:17,676 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'status', 'neutron-metadata-agent.service', '-n', '0'] in directory '/root'
2018-09-29 14:49:17,684 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-active', 'neutron-metadata-agent.service'] in directory '/root'
2018-09-29 14:49:17,691 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-enabled', 'neutron-metadata-agent.service'] in directory '/root'
2018-09-29 14:49:17,697 [salt.state       :290 ][INFO    ][14567] The service neutron-metadata-agent is already running
2018-09-29 14:49:17,697 [salt.state       :1941][INFO    ][14567] Completed state [neutron-metadata-agent] at time 14:49:17.697691 duration_in_ms=22.299
2018-09-29 14:49:17,697 [salt.state       :1770][INFO    ][14567] Running state [neutron-metadata-agent] at time 14:49:17.697894
2018-09-29 14:49:17,698 [salt.state       :1803][INFO    ][14567] Executing state service.mod_watch for [neutron-metadata-agent]
2018-09-29 14:49:17,698 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-active', 'neutron-metadata-agent.service'] in directory '/root'
2018-09-29 14:49:17,705 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'neutron-metadata-agent.service'] in directory '/root'
2018-09-29 14:49:18,512 [salt.state       :290 ][INFO    ][14567] {'neutron-metadata-agent': True}
2018-09-29 14:49:18,512 [salt.state       :1941][INFO    ][14567] Completed state [neutron-metadata-agent] at time 14:49:18.512665 duration_in_ms=814.77
2018-09-29 14:49:18,513 [salt.state       :1770][INFO    ][14567] Running state [neutron-dhcp-agent] at time 14:49:18.513573
2018-09-29 14:49:18,513 [salt.state       :1803][INFO    ][14567] Executing state service.running for [neutron-dhcp-agent]
2018-09-29 14:49:18,514 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'status', 'neutron-dhcp-agent.service', '-n', '0'] in directory '/root'
2018-09-29 14:49:18,540 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-active', 'neutron-dhcp-agent.service'] in directory '/root'
2018-09-29 14:49:18,547 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-enabled', 'neutron-dhcp-agent.service'] in directory '/root'
2018-09-29 14:49:18,554 [salt.state       :290 ][INFO    ][14567] The service neutron-dhcp-agent is already running
2018-09-29 14:49:18,554 [salt.state       :1941][INFO    ][14567] Completed state [neutron-dhcp-agent] at time 14:49:18.554577 duration_in_ms=41.003
2018-09-29 14:49:18,554 [salt.state       :1770][INFO    ][14567] Running state [neutron-dhcp-agent] at time 14:49:18.554781
2018-09-29 14:49:18,555 [salt.state       :1803][INFO    ][14567] Executing state service.mod_watch for [neutron-dhcp-agent]
2018-09-29 14:49:18,555 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemctl', 'is-active', 'neutron-dhcp-agent.service'] in directory '/root'
2018-09-29 14:49:18,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14567] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'neutron-dhcp-agent.service'] in directory '/root'
2018-09-29 14:49:18,708 [salt.state       :290 ][INFO    ][14567] {'neutron-dhcp-agent': True}
2018-09-29 14:49:18,708 [salt.state       :1941][INFO    ][14567] Completed state [neutron-dhcp-agent] at time 14:49:18.708312 duration_in_ms=153.53
2018-09-29 14:49:18,710 [salt.minion      :1708][INFO    ][14567] Returning information for job: 20180929144856460747
2018-09-29 14:49:19,562 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command state.sls with jid 20180929144919597117
2018-09-29 14:49:19,570 [salt.minion      :1431][INFO    ][17136] Starting a new job with PID 17136
2018-09-29 14:49:22,547 [salt.state       :905 ][INFO    ][17136] Loading fresh modules for state activity
2018-09-29 14:49:22,602 [salt.fileclient  :1215][INFO    ][17136] Fetching file from saltenv 'base', ** done ** 'nova/init.sls'
2018-09-29 14:49:22,628 [salt.fileclient  :1215][INFO    ][17136] Fetching file from saltenv 'base', ** done ** 'nova/compute.sls'
2018-09-29 14:49:22,903 [salt.fileclient  :1215][INFO    ][17136] Fetching file from saltenv 'base', ** done ** 'nova/_ssl/rabbitmq.sls'
2018-09-29 14:49:23,040 [salt.state       :1770][INFO    ][17136] Running state [libvirtd] at time 14:49:23.040530
2018-09-29 14:49:23,040 [salt.state       :1803][INFO    ][17136] Executing state group.present for [libvirtd]
2018-09-29 14:49:23,042 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['groupadd', '-r', 'libvirtd'] in directory '/root'
2018-09-29 14:49:23,071 [salt.state       :290 ][INFO    ][17136] {'passwd': 'x', 'gid': 999, 'name': 'libvirtd', 'members': []}
2018-09-29 14:49:23,072 [salt.state       :1941][INFO    ][17136] Completed state [libvirtd] at time 14:49:23.072198 duration_in_ms=31.669
2018-09-29 14:49:23,072 [salt.state       :1770][INFO    ][17136] Running state [nova] at time 14:49:23.072436
2018-09-29 14:49:23,072 [salt.state       :1803][INFO    ][17136] Executing state group.present for [nova]
2018-09-29 14:49:23,073 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['groupadd', '-g 303', '-r', 'nova'] in directory '/root'
2018-09-29 14:49:23,081 [salt.state       :290 ][INFO    ][17136] {'passwd': 'x', 'gid': 303, 'name': 'nova', 'members': []}
2018-09-29 14:49:23,081 [salt.state       :1941][INFO    ][17136] Completed state [nova] at time 14:49:23.081695 duration_in_ms=9.259
2018-09-29 14:49:23,082 [salt.state       :1770][INFO    ][17136] Running state [nova] at time 14:49:23.082262
2018-09-29 14:49:23,082 [salt.state       :1803][INFO    ][17136] Executing state user.present for [nova]
2018-09-29 14:49:23,084 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['useradd', '-s', '/bin/bash', '-u', '303', '-g', '303', '-m', '-d', '/var/lib/nova', '-r', 'nova'] in directory '/root'
2018-09-29 14:49:23,095 [salt.state       :290 ][INFO    ][17136] {'shell': '/bin/bash', 'workphone': '', 'uid': 303, 'passwd': 'x', 'roomnumber': '', 'groups': ['nova'], 'home': '/var/lib/nova', 'name': 'nova', 'gid': 303, 'fullname': '', 'homephone': ''}
2018-09-29 14:49:23,096 [salt.state       :1941][INFO    ][17136] Completed state [nova] at time 14:49:23.095998 duration_in_ms=13.734
2018-09-29 14:49:23,096 [salt.state       :1770][INFO    ][17136] Running state [nova_compute_ssl_rabbitmq] at time 14:49:23.096517
2018-09-29 14:49:23,096 [salt.state       :1803][INFO    ][17136] Executing state test.show_notification for [nova_compute_ssl_rabbitmq]
2018-09-29 14:49:23,097 [salt.state       :290 ][INFO    ][17136] Running nova._ssl.rabbitmq
2018-09-29 14:49:23,097 [salt.state       :1941][INFO    ][17136] Completed state [nova_compute_ssl_rabbitmq] at time 14:49:23.097283 duration_in_ms=0.765
2018-09-29 14:49:24,264 [salt.state       :1770][INFO    ][17136] Running state [nova-common] at time 14:49:24.264689
2018-09-29 14:49:24,265 [salt.state       :1803][INFO    ][17136] Executing state pkg.installed for [nova-common]
2018-09-29 14:49:24,265 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:49:24,569 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['apt-cache', '-q', 'policy', 'nova-common'] in directory '/root'
2018-09-29 14:49:24,638 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-29 14:49:26,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:49:26,061 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-common'] in directory '/root'
2018-09-29 14:49:29,661 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144929690952
2018-09-29 14:49:29,671 [salt.minion      :1431][INFO    ][18003] Starting a new job with PID 18003
2018-09-29 14:49:29,682 [salt.minion      :1708][INFO    ][18003] Returning information for job: 20180929144929690952
2018-09-29 14:49:38,783 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:49:38,817 [salt.state       :290 ][INFO    ][17136] Made the following changes:
'python-pypowervm' changed from 'absent' to '1.1.6-1~u16.04+mcp2'
'libxinerama1' changed from 'absent' to '2:1.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-junitxml' changed from 'absent' to '0.6-1.1ubuntu1'
'libthai-data' changed from 'absent' to '0.1.24-2'
'python2.7-gobject-2' changed from 'absent' to '1'
'fonts-dejavu-core' changed from 'absent' to '2.35-1'
'python2.7-cairo' changed from 'absent' to '1'
'libcups2' changed from 'absent' to '2.1.3-4ubuntu0.5'
'libgtk2.0-bin' changed from 'absent' to '2.24.30-1ubuntu1.16.04.2'
'libxdamage1' changed from 'absent' to '1:1.1.4-2'
'libxrender1' changed from 'absent' to '1:0.9.9-0ubuntu1'
'python-nova' changed from 'absent' to '2:16.1.5-3~u16.04+mcp100'
'fontconfig' changed from 'absent' to '2.11.94-0ubuntu1.1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libxi6' changed from 'absent' to '2:1.7.6-1'
'python3-mimeparse' changed from 'absent' to '0.1.4-1build1'
'libsubunit-diff-perl' changed from 'absent' to '1'
'python-gobject-2' changed from 'absent' to '2.28.6-12ubuntu1'
'websockify' changed from 'absent' to '0.8.0+dfsg1-7~u16.04+mcp2'
'python3-unittest2' changed from 'absent' to '1.1.0-6.1'
'libcairo2' changed from 'absent' to '1.14.6-1'
'libxcomposite1' changed from 'absent' to '1:0.4.4-1'
'python3-extras' changed from 'absent' to '0.0.3-3'
'libpangocairo-1.0-0' changed from 'absent' to '1.38.1-1'
'python-cairo' changed from 'absent' to '1.8.8-2'
'libgtk2.0-0' changed from 'absent' to '2.24.30-1ubuntu1.16.04.2'
'libpango-1.0-0' changed from 'absent' to '1.38.1-1'
'python3-linecache2' changed from 'absent' to '1.0.0-2'
'libgraphite2-3' changed from 'absent' to '1.3.10-0ubuntu0.16.04.1'
'libsubunit-perl' changed from 'absent' to '1.1.0-3'
'libxcb-render0' changed from 'absent' to '1.11.1-1ubuntu1'
'libpangoft2-1.0-0' changed from 'absent' to '1.38.1-1'
'python-microversion-parse' changed from 'absent' to '0.1.3-2.1~u16.04+mcp2'
'python3-pbr' changed from 'absent' to '2.0.0-1~u16.04+mcp2'
'hicolor-icon-theme' changed from 'absent' to '0.15-0ubuntu1.1'
'libatk1.0-0' changed from 'absent' to '2.18.0-1'
'libgraphite2-2.0.0' changed from 'absent' to '1'
'python-os-vif' changed from 'absent' to '1.7.0-1~u16.04+mcp2'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python3-subunit' changed from 'absent' to '1.1.0-3'
'libxcb-shm0' changed from 'absent' to '1.11.1-1ubuntu1'
'libthai0' changed from 'absent' to '0.1.24-2'
'python3-testtools' changed from 'absent' to '1.8.1-0ubuntu1'
'libxfixes3' changed from 'absent' to '1:5.0.1-2'
'python-subunit' changed from 'absent' to '1.1.0-3'
'libxrandr2' changed from 'absent' to '2:1.5.0-1'
'libgdk-pixbuf2.0-0' changed from 'absent' to '2.32.2-1ubuntu1.5'
'sqlite3' changed from 'absent' to '3.11.0-1ubuntu1'
'libgtk2.0-common' changed from 'absent' to '2.24.30-1ubuntu1.16.04.2'
'subunit' changed from 'absent' to '1.1.0-3'
'python2.7-cinderclient' changed from 'absent' to '1'
'libxcursor1' changed from 'absent' to '1:1.1.14-1ubuntu0.16.04.2'
'python-os-traits' changed from 'absent' to '0.3.3-1~u16.04+mcp2'
'libatk1.0-data' changed from 'absent' to '2.18.0-1'
'nova-common' changed from 'absent' to '2:16.1.5-3~u16.04+mcp100'
'python2.7-gobject' changed from 'absent' to '1'
'python-websockify' changed from 'absent' to '0.8.0+dfsg1-7~u16.04+mcp2'
'libfontconfig' changed from 'absent' to '1'
'python-cursive' changed from 'absent' to '0.2.0-1~u16.04+mcp2'
'libharfbuzz0b' changed from 'absent' to '1.0.1-1ubuntu0.1'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python2.7-nova' changed from 'absent' to '1'
'python-gtk2' changed from 'absent' to '2.24.0-4ubuntu1'
'libdatrie1' changed from 'absent' to '0.2.10-2'
'python3-traceback2' changed from 'absent' to '1.4.0-3'
'fontconfig-config' changed from 'absent' to '2.11.94-0ubuntu1.1'
'libgdk-pixbuf2.0-common' changed from 'absent' to '2.32.2-1ubuntu1.5'
'websockify-common' changed from 'absent' to '0.8.0+dfsg1-7~u16.04+mcp2'
'libfontconfig1' changed from 'absent' to '2.11.94-0ubuntu1.1'
'gtk2.0-binver-2.10.0' changed from 'absent' to '1'
'python-cinderclient' changed from 'absent' to '1:3.1.0-1~u16.04+mcp2'

2018-09-29 14:49:38,839 [salt.state       :905 ][INFO    ][17136] Loading fresh modules for state activity
2018-09-29 14:49:38,977 [salt.state       :1941][INFO    ][17136] Completed state [nova-common] at time 14:49:38.977059 duration_in_ms=14712.37
2018-09-29 14:49:38,981 [salt.state       :1770][INFO    ][17136] Running state [nova-compute-kvm] at time 14:49:38.981510
2018-09-29 14:49:38,981 [salt.state       :1803][INFO    ][17136] Executing state pkg.installed for [nova-compute-kvm]
2018-09-29 14:49:39,618 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:49:39,636 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-compute-kvm'] in directory '/root'
2018-09-29 14:49:39,876 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144939903918
2018-09-29 14:49:39,884 [salt.minion      :1431][INFO    ][19305] Starting a new job with PID 19305
2018-09-29 14:49:39,896 [salt.minion      :1708][INFO    ][19305] Returning information for job: 20180929144939903918
2018-09-29 14:49:50,074 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929144950106908
2018-09-29 14:49:50,085 [salt.minion      :1431][INFO    ][20152] Starting a new job with PID 20152
2018-09-29 14:49:50,096 [salt.minion      :1708][INFO    ][20152] Returning information for job: 20180929144950106908
2018-09-29 14:50:00,284 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929145000315014
2018-09-29 14:50:00,293 [salt.minion      :1431][INFO    ][29918] Starting a new job with PID 29918
2018-09-29 14:50:00,305 [salt.minion      :1708][INFO    ][29918] Returning information for job: 20180929145000315014
2018-09-29 14:50:09,484 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:50:09,521 [salt.state       :290 ][INFO    ][17136] Made the following changes:
'libnet-ssleay-perl' changed from 'absent' to '1.72-1build1'
'c++-compiler' changed from 'absent' to '1'
'libguestfs-hfsplus' changed from 'absent' to '1:1.32.2-4ubuntu2'
'qemu-keymaps' changed from 'absent' to '1'
'libmailtools-perl' changed from 'absent' to '2.13-1'
'libyajl2' changed from 'absent' to '2.1.0-2'
'elf-binutils' changed from 'absent' to '1'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'c-compiler' changed from 'absent' to '1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'libvirt-daemon-system' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'libvirt-clients' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20150424.a25a16d-1ubuntu1.2'
'liblwp-mediatypes-perl' changed from 'absent' to '6.02-1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'mkisofs' changed from 'absent' to '1'
'liburi-perl' changed from 'absent' to '1.71-1'
'lzop' changed from 'absent' to '1.03-3.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'libtimedate-perl' changed from 'absent' to '2.3000-2'
'libhfsp0' changed from 'absent' to '1.0.4-13'
'genisoimage' changed from 'absent' to '9:1.1.11-3ubuntu1'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libfile-listing-perl' changed from 'absent' to '6.04-1'
'reiserfsprogs' changed from 'absent' to '1:3.6.24-3.1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'qemu-system-i386' changed from 'absent' to '1'
'c++abi2-dev' changed from 'absent' to '1'
'qemu-system-x86-64' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'supermin' changed from 'absent' to '5.1.14-2ubuntu1.1'
'mtools' changed from 'absent' to '4.0.18-2ubuntu0.16.04'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libio-socket-ssl-perl' changed from 'absent' to '2.024-1'
'syslinux-common' changed from 'absent' to '3:6.03+dfsg-11ubuntu1'
'libfont-afm-perl' changed from 'absent' to '1.20-1'
'libwww-robotrules-perl' changed from 'absent' to '6.01-1'
'linux-libc-dev' changed from 'absent' to '4.4.0-135.161'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libwww-perl' changed from 'absent' to '6.15-1'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libwin-hivex-perl' changed from 'absent' to '1.3.13-1build3'
'cpp:any' changed from 'absent' to '1'
'kpartx' changed from 'absent' to '0.5.0+git1.656f8865-5ubuntu2.5'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libhtml-format-perl' changed from 'absent' to '2.11-2'
'nova-compute-kvm' changed from 'absent' to '2:16.1.5-3~u16.04+mcp100'
'hfsplus' changed from 'absent' to '1.0.4-13'
'libhtml-parser-perl' changed from 'absent' to '3.72-1'
'libhttp-message-perl' changed from 'absent' to '6.11-1'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-dev' changed from 'absent' to '1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libintl-perl' changed from 'absent' to '1.24-1build1'
'libhtml-form-perl' changed from 'absent' to '6.03-1'
'libxml-parser-perl' changed from 'absent' to '2.44-1build1'
'libsys-virt-perl' changed from 'absent' to '1.2.16-1ubuntu2'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'linux-kernel-headers' changed from 'absent' to '1'
'libguestfs-reiserfs' changed from 'absent' to '1:1.32.2-4ubuntu2'
'libhtml-tagset-perl' changed from 'absent' to '3.20-2'
'libflac8' changed from 'absent' to '1.3.1-4'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'
'build-essential' changed from 'absent' to '12.1ubuntu2'
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'libencode-locale-perl' changed from 'absent' to '1.05-1'
'libconfig9' changed from 'absent' to '1.5-0.2'
'qemu-kvm-spice' changed from 'absent' to '1'
'libstring-shellquote-perl' changed from 'absent' to '1.03-1.2'
'libguestfs-tools' changed from 'absent' to '1:1.32.2-4ubuntu2'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'syslinux' changed from 'absent' to '3:6.03+dfsg-11ubuntu1'
'timedate' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'libhttp-daemon-perl' changed from 'absent' to '6.01-1'
'libguestfs-perl' changed from 'absent' to '1:1.32.2-4ubuntu2'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'make:any' changed from 'absent' to '1'
'libguestfs0' changed from 'absent' to '1:1.32.2-4ubuntu2'
'mailtools' changed from 'absent' to '1'
'libhttp-cookies-perl' changed from 'absent' to '6.01-1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'libauthen-sasl-perl' changed from 'absent' to '2.1600-1'
'libnet-smtp-ssl-perl' changed from 'absent' to '1.03-1'
'libvirt0' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'
'libguestfs-xfs' changed from 'absent' to '1:1.32.2-4ubuntu2'
'libisl15' changed from 'absent' to '0.16.1-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'libhttp-negotiate-perl' changed from 'absent' to '6.00-2'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libmail-perl' changed from 'absent' to '1'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'conntrack' changed from 'absent' to '1:1.4.3-3'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'libxml-xpath-perl' changed from 'absent' to '1.30-1'
'lsscsi' changed from 'absent' to '0.27-3'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'make' changed from 'absent' to '4.1-6'
'libvirt-daemon' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'nova-compute-hypervisor' changed from 'absent' to '1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libnet-http-perl' changed from 'absent' to '6.09-1'
'libio-html-perl' changed from 'absent' to '1.001-1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libogg0' changed from 'absent' to '1.3.2-1'
'ebtables' changed from 'absent' to '2.0.10.4-3.4ubuntu2.16.04.2'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'scrub' changed from 'absent' to '2.6.1-1'
'libc-dev' changed from 'absent' to '1'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libhivex0' changed from 'absent' to '1.3.13-1build3'
'kvm' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'liblwp-protocol-https-perl' changed from 'absent' to '6.06-2'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'nova-compute' changed from 'absent' to '2:16.1.5-3~u16.04+mcp100'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'libhtml-tree-perl' changed from 'absent' to '5.03-2'
'libhttp-date-perl' changed from 'absent' to '6.02-1'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'extlinux' changed from 'absent' to '3:6.03+dfsg-11ubuntu1'
'binutils-gold' changed from 'absent' to '1'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-09-29 14:50:09,538 [salt.state       :905 ][INFO    ][17136] Loading fresh modules for state activity
2018-09-29 14:50:09,568 [salt.state       :1941][INFO    ][17136] Completed state [nova-compute-kvm] at time 14:50:09.568116 duration_in_ms=30586.605
2018-09-29 14:50:09,572 [salt.state       :1770][INFO    ][17136] Running state [python-novaclient] at time 14:50:09.572420
2018-09-29 14:50:09,572 [salt.state       :1803][INFO    ][17136] Executing state pkg.installed for [python-novaclient]
2018-09-29 14:50:10,090 [salt.state       :290 ][INFO    ][17136] All specified packages are already installed
2018-09-29 14:50:10,091 [salt.state       :1941][INFO    ][17136] Completed state [python-novaclient] at time 14:50:10.090984 duration_in_ms=518.562
2018-09-29 14:50:10,091 [salt.state       :1770][INFO    ][17136] Running state [pm-utils] at time 14:50:10.091614
2018-09-29 14:50:10,091 [salt.state       :1803][INFO    ][17136] Executing state pkg.installed for [pm-utils]
2018-09-29 14:50:10,113 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:50:10,133 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'pm-utils'] in directory '/root'
2018-09-29 14:50:10,318 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929145010353149
2018-09-29 14:50:10,325 [salt.minion      :1431][INFO    ][35579] Starting a new job with PID 35579
2018-09-29 14:50:10,335 [salt.minion      :1708][INFO    ][35579] Returning information for job: 20180929145010353149
2018-09-29 14:50:11,737 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:50:11,773 [salt.state       :290 ][INFO    ][17136] Made the following changes:
'pm-utils' changed from 'absent' to '1.4.1-16'
'libx86-1' changed from 'absent' to '1.1+ds1-10'
'vbetool' changed from 'absent' to '1.1-3'

2018-09-29 14:50:11,791 [salt.state       :905 ][INFO    ][17136] Loading fresh modules for state activity
2018-09-29 14:50:11,819 [salt.state       :1941][INFO    ][17136] Completed state [pm-utils] at time 14:50:11.819847 duration_in_ms=1728.233
2018-09-29 14:50:11,825 [salt.state       :1770][INFO    ][17136] Running state [sysfsutils] at time 14:50:11.825403
2018-09-29 14:50:11,825 [salt.state       :1803][INFO    ][17136] Executing state pkg.installed for [sysfsutils]
2018-09-29 14:50:12,321 [salt.state       :290 ][INFO    ][17136] All specified packages are already installed
2018-09-29 14:50:12,322 [salt.state       :1941][INFO    ][17136] Completed state [sysfsutils] at time 14:50:12.322373 duration_in_ms=496.957
2018-09-29 14:50:12,323 [salt.state       :1770][INFO    ][17136] Running state [sg3-utils] at time 14:50:12.323152
2018-09-29 14:50:12,323 [salt.state       :1803][INFO    ][17136] Executing state pkg.installed for [sg3-utils]
2018-09-29 14:50:12,331 [salt.state       :290 ][INFO    ][17136] All specified packages are already installed
2018-09-29 14:50:12,332 [salt.state       :1941][INFO    ][17136] Completed state [sg3-utils] at time 14:50:12.332068 duration_in_ms=8.916
2018-09-29 14:50:12,332 [salt.state       :1770][INFO    ][17136] Running state [python-memcache] at time 14:50:12.332420
2018-09-29 14:50:12,332 [salt.state       :1803][INFO    ][17136] Executing state pkg.installed for [python-memcache]
2018-09-29 14:50:12,340 [salt.state       :290 ][INFO    ][17136] All specified packages are already installed
2018-09-29 14:50:12,340 [salt.state       :1941][INFO    ][17136] Completed state [python-memcache] at time 14:50:12.340305 duration_in_ms=7.886
2018-09-29 14:50:12,340 [salt.state       :1770][INFO    ][17136] Running state [python-guestfs] at time 14:50:12.340673
2018-09-29 14:50:12,340 [salt.state       :1803][INFO    ][17136] Executing state pkg.installed for [python-guestfs]
2018-09-29 14:50:12,363 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:50:12,383 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-guestfs'] in directory '/root'
2018-09-29 14:50:14,312 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:50:14,347 [salt.state       :290 ][INFO    ][17136] Made the following changes:
'python-guestfs' changed from 'absent' to '1:1.32.2-4ubuntu2'
'python-libguestfs' changed from 'absent' to '1'

2018-09-29 14:50:14,367 [salt.state       :905 ][INFO    ][17136] Loading fresh modules for state activity
2018-09-29 14:50:14,397 [salt.state       :1941][INFO    ][17136] Completed state [python-guestfs] at time 14:50:14.397916 duration_in_ms=2057.243
2018-09-29 14:50:14,402 [salt.state       :1770][INFO    ][17136] Running state [gettext-base] at time 14:50:14.402676
2018-09-29 14:50:14,402 [salt.state       :1803][INFO    ][17136] Executing state pkg.installed for [gettext-base]
2018-09-29 14:50:14,898 [salt.state       :290 ][INFO    ][17136] All specified packages are already installed
2018-09-29 14:50:14,899 [salt.state       :1941][INFO    ][17136] Completed state [gettext-base] at time 14:50:14.899237 duration_in_ms=496.56
2018-09-29 14:50:14,901 [salt.state       :1770][INFO    ][17136] Running state [/var/log/nova] at time 14:50:14.901787
2018-09-29 14:50:14,902 [salt.state       :1803][INFO    ][17136] Executing state file.directory for [/var/log/nova]
2018-09-29 14:50:14,902 [salt.state       :290 ][INFO    ][17136] {'group': 'nova'}
2018-09-29 14:50:14,903 [salt.state       :1941][INFO    ][17136] Completed state [/var/log/nova] at time 14:50:14.903109 duration_in_ms=1.322
2018-09-29 14:50:14,903 [salt.state       :1770][INFO    ][17136] Running state [ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCltIn93BcTMzNK/n2eBze6PyTkmIgdDkeXNR9X4DqE48Va80ojv2pq8xuaBxiNITJzyl+4p4UvTTXo+HmuX8qbHvqgMGXvuPUCpndEfb2r67f6vpMqPwMgBrUg2ZKgN4OsSDHU+H0dia0cEaTjz5pvbUy9lIsSyhrqOUVF9reJq+boAvVEedm8fUqiZuiejAw2D27+rRtdEPgsKMnh3626YEsr963q4rjU/JssV/iKMNu7mk2a+koOrJ+aHvcVU8zJjfA0YghoeVT/I3GLU/MB/4tD/RyR8GM+UYbI4sgAC7ZOCdQyHdJgnEzx3SJIwcS65U0T2XYvn2qXHXqJ9iGZ root@mirantis.com] at time 14:50:14.903593
2018-09-29 14:50:14,903 [salt.state       :1803][INFO    ][17136] Executing state ssh_auth.present for [ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCltIn93BcTMzNK/n2eBze6PyTkmIgdDkeXNR9X4DqE48Va80ojv2pq8xuaBxiNITJzyl+4p4UvTTXo+HmuX8qbHvqgMGXvuPUCpndEfb2r67f6vpMqPwMgBrUg2ZKgN4OsSDHU+H0dia0cEaTjz5pvbUy9lIsSyhrqOUVF9reJq+boAvVEedm8fUqiZuiejAw2D27+rRtdEPgsKMnh3626YEsr963q4rjU/JssV/iKMNu7mk2a+koOrJ+aHvcVU8zJjfA0YghoeVT/I3GLU/MB/4tD/RyR8GM+UYbI4sgAC7ZOCdQyHdJgnEzx3SJIwcS65U0T2XYvn2qXHXqJ9iGZ root@mirantis.com]
2018-09-29 14:50:14,906 [salt.state       :290 ][INFO    ][17136] {'AAAAB3NzaC1yc2EAAAADAQABAAABAQCltIn93BcTMzNK/n2eBze6PyTkmIgdDkeXNR9X4DqE48Va80ojv2pq8xuaBxiNITJzyl+4p4UvTTXo+HmuX8qbHvqgMGXvuPUCpndEfb2r67f6vpMqPwMgBrUg2ZKgN4OsSDHU+H0dia0cEaTjz5pvbUy9lIsSyhrqOUVF9reJq+boAvVEedm8fUqiZuiejAw2D27+rRtdEPgsKMnh3626YEsr963q4rjU/JssV/iKMNu7mk2a+koOrJ+aHvcVU8zJjfA0YghoeVT/I3GLU/MB/4tD/RyR8GM+UYbI4sgAC7ZOCdQyHdJgnEzx3SJIwcS65U0T2XYvn2qXHXqJ9iGZ': 'New'}
2018-09-29 14:50:14,906 [salt.state       :1941][INFO    ][17136] Completed state [ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCltIn93BcTMzNK/n2eBze6PyTkmIgdDkeXNR9X4DqE48Va80ojv2pq8xuaBxiNITJzyl+4p4UvTTXo+HmuX8qbHvqgMGXvuPUCpndEfb2r67f6vpMqPwMgBrUg2ZKgN4OsSDHU+H0dia0cEaTjz5pvbUy9lIsSyhrqOUVF9reJq+boAvVEedm8fUqiZuiejAw2D27+rRtdEPgsKMnh3626YEsr963q4rjU/JssV/iKMNu7mk2a+koOrJ+aHvcVU8zJjfA0YghoeVT/I3GLU/MB/4tD/RyR8GM+UYbI4sgAC7ZOCdQyHdJgnEzx3SJIwcS65U0T2XYvn2qXHXqJ9iGZ root@mirantis.com] at time 14:50:14.906601 duration_in_ms=3.008
2018-09-29 14:50:14,907 [salt.state       :1770][INFO    ][17136] Running state [nova] at time 14:50:14.907217
2018-09-29 14:50:14,907 [salt.state       :1803][INFO    ][17136] Executing state user.present for [nova]
2018-09-29 14:50:14,909 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['usermod', '-s', '/bin/bash', 'nova'] in directory '/root'
2018-09-29 14:50:14,918 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['usermod', '-G', 'libvirtd', 'nova'] in directory '/root'
2018-09-29 14:50:14,929 [salt.state       :290 ][INFO    ][17136] {'shell': '/bin/bash', 'groups': ['libvirtd', 'nova']}
2018-09-29 14:50:14,929 [salt.state       :1941][INFO    ][17136] Completed state [nova] at time 14:50:14.929537 duration_in_ms=22.319
2018-09-29 14:50:14,929 [salt.state       :1770][INFO    ][17136] Running state [libvirt-qemu] at time 14:50:14.929767
2018-09-29 14:50:14,930 [salt.state       :1803][INFO    ][17136] Executing state user.present for [libvirt-qemu]
2018-09-29 14:50:14,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['usermod', '-G', 'nova', 'libvirt-qemu'] in directory '/root'
2018-09-29 14:50:14,941 [salt.state       :290 ][INFO    ][17136] {'groups': ['kvm', 'nova']}
2018-09-29 14:50:14,942 [salt.state       :1941][INFO    ][17136] Completed state [libvirt-qemu] at time 14:50:14.942146 duration_in_ms=12.378
2018-09-29 14:50:14,942 [salt.state       :1770][INFO    ][17136] Running state [/var/lib/nova] at time 14:50:14.942374
2018-09-29 14:50:14,942 [salt.state       :1803][INFO    ][17136] Executing state file.directory for [/var/lib/nova]
2018-09-29 14:50:14,943 [salt.state       :290 ][INFO    ][17136] {'mode': '0750'}
2018-09-29 14:50:14,943 [salt.state       :1941][INFO    ][17136] Completed state [/var/lib/nova] at time 14:50:14.943703 duration_in_ms=1.329
2018-09-29 14:50:14,944 [salt.state       :1770][INFO    ][17136] Running state [/var/lib/nova/.ssh/id_rsa] at time 14:50:14.944287
2018-09-29 14:50:14,944 [salt.state       :1803][INFO    ][17136] Executing state file.managed for [/var/lib/nova/.ssh/id_rsa]
2018-09-29 14:50:14,946 [salt.state       :290 ][INFO    ][17136] File changed:
New file
2018-09-29 14:50:14,947 [salt.state       :1941][INFO    ][17136] Completed state [/var/lib/nova/.ssh/id_rsa] at time 14:50:14.947020 duration_in_ms=2.733
2018-09-29 14:50:14,947 [salt.state       :1770][INFO    ][17136] Running state [/var/lib/nova/.ssh/config] at time 14:50:14.947448
2018-09-29 14:50:14,947 [salt.state       :1803][INFO    ][17136] Executing state file.managed for [/var/lib/nova/.ssh/config]
2018-09-29 14:50:14,949 [salt.state       :290 ][INFO    ][17136] File changed:
New file
2018-09-29 14:50:14,949 [salt.state       :1941][INFO    ][17136] Completed state [/var/lib/nova/.ssh/config] at time 14:50:14.949261 duration_in_ms=1.812
2018-09-29 14:50:14,949 [salt.state       :1770][INFO    ][17136] Running state [/etc/nova/nova.conf] at time 14:50:14.949805
2018-09-29 14:50:14,950 [salt.state       :1803][INFO    ][17136] Executing state file.managed for [/etc/nova/nova.conf]
2018-09-29 14:50:14,993 [salt.fileclient  :1215][INFO    ][17136] Fetching file from saltenv 'base', ** done ** 'nova/files/pike/nova-compute.conf.Debian'
2018-09-29 14:50:15,409 [salt.state       :290 ][INFO    ][17136] File changed:
--- 
+++ 
@@ -1,4 +1,2768 @@
+
+
 [DEFAULT]
+
+#
+# From nova.conf
+#
+compute_manager=nova.compute.manager.ComputeManager
+network_device_mtu=65000
+use_neutron = True
+security_group_api=neutron
+image_service=nova.image.glance.GlanceImageService
+
+# DEPRECATED:
+# When returning instance metadata, this is the class that is used
+# for getting vendor metadata when that class isn't specified in the individual
+# request. The value should be the full dot-separated path to the class to use.
+#
+# Possible values:
+#
+# * Any valid dot-separated class path that can be imported.
+#  (string value)
+# This option is deprecated for removal since 13.0.0.
+# Its value may be silently ignored in the future.
+#vendordata_driver=nova.api.metadata.vendordata_json.JsonFileVendorData
+
+# DEPRECATED:
+# This option is used to enable or disable quota checking for tenant networks.
+#
+# Related options:
+#
+# * quota_networks
+#  (boolean value)
+# This option is deprecated for removal since 14.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# CRUD operations on tenant networks are only available when using nova-network
+# and nova-network is itself deprecated.
+#enable_network_quota=false
+
+# DEPRECATED:
+# This option controls the number of private networks that can be created per
+# project (or per tenant).
+#
+# Related options:
+#
+# * enable_network_quota
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since 14.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# CRUD operations on tenant networks are only available when using nova-network
+# and nova-network is itself deprecated.
+#quota_networks=3
+
+#
+# This option specifies the name of the availability zone for the
+# internal services. Services like nova-scheduler, nova-network,
+# nova-conductor are internal services. These services will appear in
+# their own internal availability_zone.
+#
+# Possible values:
+#
+# * Any string representing an availability zone name
+# * 'internal' is the default value
+#
+#  (string value)
+#internal_service_availability_zone=internal
+
+#
+# Default compute node availability_zone.
+#
+# This option determines the availability zone to be used when it is not
+# specified in the VM creation request. If this option is not set,
+# the default availability zone 'nova' is used.
+#
+# Possible values:
+#
+# * Any string representing an availability zone name
+# * 'nova' is the default value
+#
+#  (string value)
+#default_availability_zone=nova
+
+# Length of generated instance admin passwords. (integer value)
+# Minimum value: 0
+#password_length=12
+
+#
+# Time period to generate instance usages for. It is possible to define optional
+# offset to given period by appending @ character followed by a number defining
+# offset.
+#
+# Possible values:
+#
+# *  period, example: ``hour``, ``day``, ``month` or ``year``
+# *  period with offset, example: ``month@15`` will result in monthly audits
+#    starting on 15th day of month.
+#  (string value)
+#instance_usage_audit_period=month
+
+instance_usage_audit = True
+instance_usage_audit_period = hour
+#
+# Start and use a daemon that can run the commands that need to be run with
+# root privileges. This option is usually enabled on nodes that run nova compute
+# processes.
+#  (boolean value)
+#use_rootwrap_daemon=false
+
+#
+# Path to the rootwrap configuration file.
+#
+# Goal of the root wrapper is to allow a service-specific unprivileged user to
+# run a number of actions as the root user in the safest manner possible.
+# The configuration file used here must match the one defined in the sudoers
+# entry.
+#  (string value)
+#rootwrap_config=/etc/nova/rootwrap.conf
+rootwrap_config=/etc/nova/rootwrap.conf
+
+# Explicitly specify the temporary working directory. (string value)
+#tempdir=<None>
+
+#
+# Determine if monkey patching should be applied.
+#
+# Related options:
+#
+# * ``monkey_patch_modules``: This must have values set for this option to
+#   have any effect
+#  (boolean value)
+#monkey_patch=false
+
+#
+# List of modules/decorators to monkey patch.
+#
+# This option allows you to patch a decorator for all functions in specified
+# modules.
+#
+# Possible values:
+#
+# * nova.compute.api:nova.notifications.notify_decorator
+# * nova.api.ec2.cloud:nova.notifications.notify_decorator
+# * [...]
+#
+# Related options:
+#
+# * ``monkey_patch``: This must be set to ``True`` for this option to
+#   have any effect
+#  (list value)
+#monkey_patch_modules=nova.compute.api:nova.notifications.notify_decorator
+
+#
+# Defines which driver to use for controlling virtualization.
+#
+# Possible values:
+#
+# * ``libvirt.LibvirtDriver``
+# * ``xenapi.XenAPIDriver``
+# * ``fake.FakeDriver``
+# * ``ironic.IronicDriver``
+# * ``vmwareapi.VMwareVCDriver``
+# * ``hyperv.HyperVDriver``
+#  (string value)
+#compute_driver=<None>
+compute_driver = libvirt.LibvirtDriver
+
+#
+# Allow destination machine to match source for resize. Useful when
+# testing in single-host environments. By default it is not allowed
+# to resize to the same host. Setting this option to true will add
+# the same host to the destination options.
+#  (boolean value)
+#allow_resize_to_same_host=false
+allow_resize_to_same_host=true
+
+#
+# Availability zone to use when user doesn't specify one.
+#
+# This option is used by the scheduler to determine which availability
+# zone to place a new VM instance into if the user did not specify one
+# at the time of VM boot request.
+#
+# Possible values:
+#
+# * Any string representing an availability zone name
+# * Default value is None.
+#  (string value)
+#default_schedule_zone=<None>
+
+#
+# Image properties that should not be inherited from the instance
+# when taking a snapshot.
+#
+# This option gives an opportunity to select which image-properties
+# should not be inherited by newly created snapshots.
+#
+# Possible values:
+#
+# * A list whose item is an image property. Usually only the image
+#   properties that are only needed by base images can be included
+#   here, since the snapshots that are created from the base images
+#   doesn't need them.
+# * Default list: ['cache_in_nova', 'bittorrent']
+#  (list value)
+#non_inheritable_image_properties=cache_in_nova,bittorrent
+
+# DEPRECATED:
+# This option is used to decide when an image should have no external
+# ramdisk or kernel. By default this is set to 'nokernel', so when an
+# image is booted with the property 'kernel_id' with the value
+# 'nokernel', Nova assumes the image doesn't require an external kernel
+# and ramdisk.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# When an image is booted with the property 'kernel_id' with the value
+# 'nokernel', Nova assumes the image doesn't require an external kernel and
+# ramdisk. This option allows user to change the API behaviour which should not
+# be allowed and this value "nokernel" should be hard coded.
+#null_kernel=nokernel
+
+# DEPRECATED:
+# When creating multiple instances with a single request using the
+# os-multiple-create API extension, this template will be used to build
+# the display name for each instance. The benefit is that the instances
+# end up with different hostnames. Example display names when creating
+# two VM's: name-1, name-2.
+#
+# Possible values:
+#
+# * Valid keys for the template are: name, uuid, count.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# This config changes API behaviour. All changes in API behaviour should be
+# discoverable.
+#multi_instance_display_name_template=%(name)s-%(count)d
+
+#
+# Maximum number of devices that will result in a local image being
+# created on the hypervisor node.
+#
+# A negative number means unlimited. Setting max_local_block_devices
+# to 0 means that any request that attempts to create a local disk
+# will fail. This option is meant to limit the number of local discs
+# (so root local disc that is the result of --image being used, and
+# any other ephemeral and swap disks). 0 does not mean that images
+# will be automatically converted to volumes and boot instances from
+# volumes - it just means that all requests that attempt to create a
+# local disk will fail.
+#
+# Possible values:
+#
+# * 0: Creating a local disk is not allowed.
+# * Negative number: Allows unlimited number of local discs.
+# * Positive number: Allows only these many number of local discs.
+#                        (Default value is 3).
+#  (integer value)
+#max_local_block_devices=3
+
+#
+# A list of monitors that can be used for getting compute metrics.
+# You can use the alias/name from the setuptools entry points for
+# nova.compute.monitors.* namespaces. If no namespace is supplied,
+# the "cpu." namespace is assumed for backwards-compatibility.
+#
+# Possible values:
+#
+# * An empty list will disable the feature(Default).
+# * An example value that would enable both the CPU and NUMA memory
+#   bandwidth monitors that used the virt driver variant:
+#   ["cpu.virt_driver", "numa_mem_bw.virt_driver"]
+#  (list value)
+#compute_monitors =
+
+#
+# The default format an ephemeral_volume will be formatted with on creation.
+#
+# Possible values:
+#
+# * ``ext2``
+# * ``ext3``
+# * ``ext4``
+# * ``xfs``
+# * ``ntfs`` (only for Windows guests)
+#  (string value)
+#default_ephemeral_format=<None>
+
+#
+# Determine if instance should boot or fail on VIF plugging timeout.
+#
+# Nova sends a port update to Neutron after an instance has been scheduled,
+# providing Neutron with the necessary information to finish setup of the port.
+# Once completed, Neutron notifies Nova that it has finished setting up the
+# port, at which point Nova resumes the boot of the instance since network
+# connectivity is now supposed to be present. A timeout will occur if the reply
+# is not received after a given interval.
+#
+# This option determines what Nova does when the VIF plugging timeout event
+# happens. When enabled, the instance will error out. When disabled, the
+# instance will continue to boot on the assumption that the port is ready.
+#
+# Possible values:
+#
+# * True: Instances should fail after VIF plugging timeout
+# * False: Instances should continue booting after VIF plugging timeout
+#  (boolean value)
+#vif_plugging_is_fatal=true
+vif_plugging_is_fatal=true
+
+#
+# Timeout for Neutron VIF plugging event message arrival.
+#
+# Number of seconds to wait for Neutron vif plugging events to
+# arrive before continuing or failing (see 'vif_plugging_is_fatal').
+#
+# Related options:
+#
+# * vif_plugging_is_fatal - If ``vif_plugging_timeout`` is set to zero and
+#   ``vif_plugging_is_fatal`` is False, events should not be expected to
+#   arrive at all.
+#  (integer value)
+# Minimum value: 0
+#vif_plugging_timeout=300
+vif_plugging_timeout=300
+
+# Path to '/etc/network/interfaces' template.
+#
+# The path to a template file for the '/etc/network/interfaces'-style file,
+# which
+# will be populated by nova and subsequently used by cloudinit. This provides a
+# method to configure network connectivity in environments without a DHCP
+# server.
+#
+# The template will be rendered using Jinja2 template engine, and receive a
+# top-level key called ``interfaces``. This key will contain a list of
+# dictionaries, one for each interface.
+#
+# Refer to the cloudinit documentaion for more information:
+#
+#   https://cloudinit.readthedocs.io/en/latest/topics/datasources.html
+#
+# Possible values:
+#
+# * A path to a Jinja2-formatted template for a Debian '/etc/network/interfaces'
+#   file. This applies even if using a non Debian-derived guest.
+#
+# Related options:
+#
+# * ``flat_inject``: This must be set to ``True`` to ensure nova embeds network
+#   configuration information in the metadata provided through the config drive.
+#  (string value)
+#injected_network_template=$pybasedir/nova/virt/interfaces.template
+
+#
+# The image preallocation mode to use.
+#
+# Image preallocation allows storage for instance images to be allocated up
+# front
+# when the instance is initially provisioned. This ensures immediate feedback is
+# given if enough space isn't available. In addition, it should significantly
+# improve performance on writes to new blocks and may even improve I/O
+# performance to prewritten blocks due to reduced fragmentation.
+#
+# Possible values:
+#
+# * "none"  => no storage provisioning is done up front
+# * "space" => storage is fully allocated at instance start
+#  (string value)
+# Allowed values: none, space
+#preallocate_images=none
+
+#
+# Enable use of copy-on-write (cow) images.
+#
+# QEMU/KVM allow the use of qcow2 as backing files. By disabling this,
+# backing files will not be used.
+#  (boolean value)
+#use_cow_images=true
+
+#
+# Force conversion of backing images to raw format.
+#
+# Possible values:
+#
+# * True: Backing image files will be converted to raw image format
+# * False: Backing image files will not be converted
+#
+# Related options:
+#
+# * ``compute_driver``: Only the libvirt driver uses this option.
+#  (boolean value)
+#force_raw_images=true
+force_raw_images=true
+
+#
+# Name of the mkfs commands for ephemeral device.
+#
+# The format is <os_type>=<mkfs command>
+#  (multi valued)
+#virt_mkfs =
+
+#
+# Enable resizing of filesystems via a block device.
+#
+# If enabled, attempt to resize the filesystem by accessing the image over a
+# block device. This is done by the host and may not be necessary if the image
+# contains a recent version of cloud-init. Possible mechanisms require the nbd
+# driver (for qcow and raw), or loop (for raw).
+#  (boolean value)
+#resize_fs_using_block_device=false
+
+# Amount of time, in seconds, to wait for NBD device start up. (integer value)
+# Minimum value: 0
+#timeout_nbd=10
+
+#
+# Location of cached images.
+#
+# This is NOT the full path - just a folder name relative to '$instances_path'.
+# For per-compute-host cached images, set to '_base_$my_ip'
+#  (string value)
+#image_cache_subdirectory_name=_base
+
+# Should unused base images be removed? (boolean value)
+#remove_unused_base_images=true
+
+#
+# Unused unresized base images younger than this will not be removed.
+#  (integer value)
+#remove_unused_original_minimum_age_seconds=86400
+remove_unused_original_minimum_age_seconds=86400
+
+#
+# Generic property to specify the pointer type.
+#
+# Input devices allow interaction with a graphical framebuffer. For
+# example to provide a graphic tablet for absolute cursor movement.
+#
+# If set, the 'hw_pointer_model' image property takes precedence over
+# this configuration option.
+#
+# Possible values:
+#
+# * None: Uses default behavior provided by drivers (mouse on PS2 for
+#         libvirt x86)
+# * ps2mouse: Uses relative movement. Mouse connected by PS2
+# * usbtablet: Uses absolute movement. Tablet connect by USB
+#
+# Related options:
+#
+# * usbtablet must be configured with VNC enabled or SPICE enabled and SPICE
+#   agent disabled. When used with libvirt the instance mode should be
+#   configured as HVM.
+#   (string value)
+# Allowed values: <None>, ps2mouse, usbtablet
+#pointer_model=usbtablet
+
+#
+# Defines which physical CPUs (pCPUs) can be used by instance
+# virtual CPUs (vCPUs).
+#
+# Possible values:
+#
+# * A comma-separated list of physical CPU numbers that virtual CPUs can be
+#   allocated to by default. Each element should be either a single CPU number,
+#   a range of CPU numbers, or a caret followed by a CPU number to be
+#   excluded from a previous range. For example:
+#
+#     vcpu_pin_set = "4-12,^8,15"
+#  (string value)
+#vcpu_pin_set=<None>
+
+#
+# Number of huge/large memory pages to reserved per NUMA host cell.
+#
+# Possible values:
+#
+# * A list of valid key=value which reflect NUMA node ID, page size
+#   (Default unit is KiB) and number of pages to be reserved.
+#
+#     reserved_huge_pages = node:0,size:2048,count:64
+#     reserved_huge_pages = node:1,size:1GB,count:1
+#
+#   In this example we are reserving on NUMA node 0 64 pages of 2MiB
+#   and on NUMA node 1 1 page of 1GiB.
+#  (dict value)
+#reserved_huge_pages=<None>
+
+#
+# Amount of disk resources in MB to make them always available to host. The
+# disk usage gets reported back to the scheduler from nova-compute running
+# on the compute nodes. To prevent the disk resources from being considered
+# as available, this option can be used to reserve disk space for that host.
+#
+# Possible values:
+#
+# * Any positive integer representing amount of disk in MB to reserve
+#   for the host.
+#  (integer value)
+# Minimum value: 0
+#reserved_host_disk_mb=0
+
+#
+# Amount of memory in MB to reserve for the host so that it is always available
+# to host processes. The host resources usage is reported back to the scheduler
+# continuously from nova-compute running on the compute node. To prevent the
+# host
+# memory from being considered as available, this option is used to reserve
+# memory for the host.
+#
+# Possible values:
+#
+# * Any positive integer representing amount of memory in MB to reserve
+#   for the host.
+#  (integer value)
+# Minimum value: 0
+#reserved_host_memory_mb=512
+reserved_host_memory_mb = 512
+
+#
+# This option helps you specify virtual CPU to physical CPU allocation ratio.
+#
+# From Ocata (15.0.0) this is used to influence the hosts selected by
+# the Placement API. Note that when Placement is used, the CoreFilter
+# is redundant, because the Placement API will have already filtered
+# out hosts that would have failed the CoreFilter.
+#
+# This configuration specifies ratio for CoreFilter which can be set
+# per compute node. For AggregateCoreFilter, it will fall back to this
+# configuration value if no per-aggregate setting is found.
+#
+# NOTE: This can be set per-compute, or if set to 0.0, the value
+# set on the scheduler node(s) or compute node(s) will be used
+# and defaulted to 16.0'.
+#
+# Possible values:
+#
+# * Any valid positive integer or float value
+#  (floating point value)
+# Minimum value: 0
+#cpu_allocation_ratio=0.0
+
+#
+# This option helps you specify virtual RAM to physical RAM
+# allocation ratio.
+#
+# From Ocata (15.0.0) this is used to influence the hosts selected by
+# the Placement API. Note that when Placement is used, the RamFilter
+# is redundant, because the Placement API will have already filtered
+# out hosts that would have failed the RamFilter.
+#
+# This configuration specifies ratio for RamFilter which can be set
+# per compute node. For AggregateRamFilter, it will fall back to this
+# configuration value if no per-aggregate setting found.
+#
+# NOTE: This can be set per-compute, or if set to 0.0, the value
+# set on the scheduler node(s) or compute node(s) will be used and
+# defaulted to 1.5.
+#
+# Possible values:
+#
+# * Any valid positive integer or float value
+#  (floating point value)
+# Minimum value: 0
+#ram_allocation_ratio=0.0
+
+#
+# This option helps you specify virtual disk to physical disk
+# allocation ratio.
+#
+# From Ocata (15.0.0) this is used to influence the hosts selected by
+# the Placement API. Note that when Placement is used, the DiskFilter
+# is redundant, because the Placement API will have already filtered
+# out hosts that would have failed the DiskFilter.
+#
+# A ratio greater than 1.0 will result in over-subscription of the
+# available physical disk, which can be useful for more
+# efficiently packing instances created with images that do not
+# use the entire virtual disk, such as sparse or compressed
+# images. It can be set to a value between 0.0 and 1.0 in order
+# to preserve a percentage of the disk for uses other than
+# instances.
+#
+# NOTE: This can be set per-compute, or if set to 0.0, the value
+# set on the scheduler node(s) or compute node(s) will be used and
+# defaulted to 1.0'.
+#
+# Possible values:
+#
+# * Any valid positive integer or float value
+#  (floating point value)
+# Minimum value: 0
+#disk_allocation_ratio=0.0
+
+#
+# Console proxy host to be used to connect to instances on this host. It is the
+# publicly visible name for the console host.
+#
+# Possible values:
+#
+# * Current hostname (default) or any string representing hostname.
+#  (string value)
+#console_host=socket.gethostname()
+
+#
+# Name of the network to be used to set access IPs for instances. If there are
+# multiple IPs to choose from, an arbitrary one will be chosen.
+#
+# Possible values:
+#
+# * None (default)
+# * Any string representing network name.
+#  (string value)
+#default_access_ip_network_name=<None>
+
+#
+# Whether to batch up the application of IPTables rules during a host restart
+# and apply all at the end of the init phase.
+#  (boolean value)
+#defer_iptables_apply=false
+
+#
+# Specifies where instances are stored on the hypervisor's disk.
+# It can point to locally attached storage or a directory on NFS.
+#
+# Possible values:
+#
+# * $state_path/instances where state_path is a config option that specifies
+#   the top-level directory for maintaining nova's state. (default) or
+#   Any string representing directory path.
+#  (string value)
+#instances_path=$state_path/instances
+instances_path = $state_path/instances
+
+#
+# This option enables periodic compute.instance.exists notifications. Each
+# compute node must be configured to generate system usage data. These
+# notifications are consumed by OpenStack Telemetry service.
+#  (boolean value)
+#instance_usage_audit=false
+
+#
+# Maximum number of 1 second retries in live_migration. It specifies number
+# of retries to iptables when it complains. It happens when an user continuously
+# sends live-migration request to same host leading to concurrent request
+# to iptables.
+#
+# Possible values:
+#
+# * Any positive integer representing retry count.
+#  (integer value)
+# Minimum value: 0
+#live_migration_retry_count=30
+
+#
+# This option specifies whether to start guests that were running before the
+# host rebooted. It ensures that all of the instances on a Nova compute node
+# resume their state each time the compute node boots or restarts.
+#  (boolean value)
+#resume_guests_state_on_host_boot=false
+resume_guests_state_on_host_boot=True
+
+#
+# Number of times to retry network allocation. It is required to attempt network
+# allocation retries if the virtual interface plug fails.
+#
+# Possible values:
+#
+# * Any positive integer representing retry count.
+#  (integer value)
+# Minimum value: 0
+#network_allocate_retries=0
+
+#
+# Limits the maximum number of instance builds to run concurrently by
+# nova-compute. Compute service can attempt to build an infinite number of
+# instances, if asked to do so. This limit is enforced to avoid building
+# unlimited instance concurrently on a compute node. This value can be set
+# per compute node.
+#
+# Possible Values:
+#
+# * 0 : treated as unlimited.
+# * Any positive integer representing maximum concurrent builds.
+#  (integer value)
+# Minimum value: 0
+#max_concurrent_builds=10
+
+#
+# Maximum number of live migrations to run concurrently. This limit is enforced
+# to avoid outbound live migrations overwhelming the host/network and causing
+# failures. It is not recommended that you change this unless you are very sure
+# that doing so is safe and stable in your environment.
+#
+# Possible values:
+#
+# * 0 : treated as unlimited.
+# * Negative value defaults to 0.
+# * Any positive integer representing maximum number of live migrations
+#   to run concurrently.
+#  (integer value)
+#max_concurrent_live_migrations=1
+
+#
+# Number of times to retry block device allocation on failures. Starting with
+# Liberty, Cinder can use image volume cache. This may help with block device
+# allocation performance. Look at the cinder image_volume_cache_enabled
+# configuration option.
+#
+# Possible values:
+#
+# * 60 (default)
+# * If value is 0, then one attempt is made.
+# * Any negative value is treated as 0.
+# * For any value > 0, total attempts are (value + 1)
+#  (integer value)
+#block_device_allocate_retries=60
+block_device_allocate_retries=600
+
+#
+# Number of greenthreads available for use to sync power states.
+#
+# This option can be used to reduce the number of concurrent requests
+# made to the hypervisor or system with real instance power states
+# for performance reasons, for example, with Ironic.
+#
+# Possible values:
+#
+# * Any positive integer representing greenthreads count.
+#  (integer value)
+#sync_power_state_pool_size=1000
+
+#
+# Number of seconds to wait between runs of the image cache manager.
+#
+# Possible values:
+# * 0: run at the default rate.
+# * -1: disable
+# * Any other value
+#  (integer value)
+# Minimum value: -1
+#image_cache_manager_interval=2400
+image_cache_manager_interval=0
+
+#
+# Interval to pull network bandwidth usage info.
+#
+# Not supported on all hypervisors. If a hypervisor doesn't support bandwidth
+# usage, it will not get the info in the usage events.
+#
+# Possible values:
+#
+# * 0: Will run at the default periodic interval.
+# * Any value < 0: Disables the option.
+# * Any positive integer in seconds.
+#  (integer value)
+#bandwidth_poll_interval=600
+
+#
+# Interval to sync power states between the database and the hypervisor.
+#
+# The interval that Nova checks the actual virtual machine power state
+# and the power state that Nova has in its database. If a user powers
+# down their VM, Nova updates the API to report the VM has been
+# powered down. Should something turn on the VM unexpectedly,
+# Nova will turn the VM back off to keep the system in the expected
+# state.
+#
+# Possible values:
+#
+# * 0: Will run at the default periodic interval.
+# * Any value < 0: Disables the option.
+# * Any positive integer in seconds.
+#
+# Related options:
+#
+# * If ``handle_virt_lifecycle_events`` in workarounds_group is
+#   false and this option is negative, then instances that get out
+#   of sync between the hypervisor and the Nova database will have
+#   to be synchronized manually.
+#  (integer value)
+#sync_power_state_interval=600
+
+#
+# Interval between instance network information cache updates.
+#
+# Number of seconds after which each compute node runs the task of
+# querying Neutron for all of its instances networking information,
+# then updates the Nova db with that information. Nova will never
+# update it's cache if this option is set to 0. If we don't update the
+# cache, the metadata service and nova-api endpoints will be proxying
+# incorrect network data about the instance. So, it is not recommended
+# to set this option to 0.
+#
+# Possible values:
+#
+# * Any positive integer in seconds.
+# * Any value <=0 will disable the sync. This is not recommended.
+#  (integer value)
+#heal_instance_info_cache_interval=60
+heal_instance_info_cache_interval = 60
+
+#
+# Interval for reclaiming deleted instances.
+#
+# A value greater than 0 will enable SOFT_DELETE of instances.
+# This option decides whether the server to be deleted will be put into
+# the SOFT_DELETED state. If this value is greater than 0, the deleted
+# server will not be deleted immediately, instead it will be put into
+# a queue until it's too old (deleted time greater than the value of
+# reclaim_instance_interval). The server can be recovered from the
+# delete queue by using the restore action. If the deleted server remains
+# longer than the value of reclaim_instance_interval, it will be
+# deleted by a periodic task in the compute service automatically.
+#
+# Note that this option is read from both the API and compute nodes, and
+# must be set globally otherwise servers could be put into a soft deleted
+# state in the API and never actually reclaimed (deleted) on the compute
+# node.
+#
+# Possible values:
+#
+# * Any positive integer(in seconds) greater than 0 will enable
+#   this option.
+# * Any value <=0 will disable the option.
+#  (integer value)
+#reclaim_instance_interval=0
+
+#
+# Interval for gathering volume usages.
+#
+# This option updates the volume usage cache for every
+# volume_usage_poll_interval number of seconds.
+#
+# Possible values:
+#
+# * Any positive integer(in seconds) greater than 0 will enable
+#   this option.
+# * Any value <=0 will disable the option.
+#  (integer value)
+#volume_usage_poll_interval=0
+
+#
+# Interval for polling shelved instances to offload.
+#
+# The periodic task runs for every shelved_poll_interval number
+# of seconds and checks if there are any shelved instances. If it
+# finds a shelved instance, based on the 'shelved_offload_time' config
+# value it offloads the shelved instances. Check 'shelved_offload_time'
+# config option description for details.
+#
+# Possible values:
+#
+# * Any value <= 0: Disables the option.
+# * Any positive integer in seconds.
+#
+# Related options:
+#
+# * ``shelved_offload_time``
+#  (integer value)
+#shelved_poll_interval=3600
+
+#
+# Time before a shelved instance is eligible for removal from a host.
+#
+# By default this option is set to 0 and the shelved instance will be
+# removed from the hypervisor immediately after shelve operation.
+# Otherwise, the instance will be kept for the value of
+# shelved_offload_time(in seconds) so that during the time period the
+# unshelve action will be faster, then the periodic task will remove
+# the instance from hypervisor after shelved_offload_time passes.
+#
+# Possible values:
+#
+# * 0: Instance will be immediately offloaded after being
+#      shelved.
+# * Any value < 0: An instance will never offload.
+# * Any positive integer in seconds: The instance will exist for
+#   the specified number of seconds before being offloaded.
+#  (integer value)
+#shelved_offload_time=0
+
+#
+# Interval for retrying failed instance file deletes.
+#
+# This option depends on 'maximum_instance_delete_attempts'.
+# This option specifies how often to retry deletes whereas
+# 'maximum_instance_delete_attempts' specifies the maximum number
+# of retry attempts that can be made.
+#
+# Possible values:
+#
+# * 0: Will run at the default periodic interval.
+# * Any value < 0: Disables the option.
+# * Any positive integer in seconds.
+#
+# Related options:
+#
+# * ``maximum_instance_delete_attempts`` from instance_cleaning_opts
+#   group.
+#  (integer value)
+#instance_delete_interval=300
+
+#
+# Interval (in seconds) between block device allocation retries on failures.
+#
+# This option allows the user to specify the time interval between
+# consecutive retries. 'block_device_allocate_retries' option specifies
+# the maximum number of retries.
+#
+# Possible values:
+#
+# * 0: Disables the option.
+# * Any positive integer in seconds enables the option.
+#
+# Related options:
+#
+# * ``block_device_allocate_retries`` in compute_manager_opts group.
+#  (integer value)
+# Minimum value: 0
+#block_device_allocate_retries_interval=3
+block_device_allocate_retries_interval=10
+
+#
+# Interval between sending the scheduler a list of current instance UUIDs to
+# verify that its view of instances is in sync with nova.
+#
+# If the CONF option 'scheduler_tracks_instance_changes' is
+# False, the sync calls will not be made. So, changing this option will
+# have no effect.
+#
+# If the out of sync situations are not very common, this interval
+# can be increased to lower the number of RPC messages being sent.
+# Likewise, if sync issues turn out to be a problem, the interval
+# can be lowered to check more frequently.
+#
+# Possible values:
+#
+# * 0: Will run at the default periodic interval.
+# * Any value < 0: Disables the option.
+# * Any positive integer in seconds.
+#
+# Related options:
+#
+# * This option has no impact if ``scheduler_tracks_instance_changes``
+#   is set to False.
+#  (integer value)
+#scheduler_instance_sync_interval=120
+
+#
+# Interval for updating compute resources.
+#
+# This option specifies how often the update_available_resources
+# periodic task should run. A number less than 0 means to disable the
+# task completely. Leaving this at the default of 0 will cause this to
+# run at the default periodic interval. Setting it to any positive
+# value will cause it to run at approximately that number of seconds.
+#
+# Possible values:
+#
+# * 0: Will run at the default periodic interval.
+# * Any value < 0: Disables the option.
+# * Any positive integer in seconds.
+#  (integer value)
+#update_resources_interval=0
+
+#
+# Time interval after which an instance is hard rebooted automatically.
+#
+# When doing a soft reboot, it is possible that a guest kernel is
+# completely hung in a way that causes the soft reboot task
+# to not ever finish. Setting this option to a time period in seconds
+# will automatically hard reboot an instance if it has been stuck
+# in a rebooting state longer than N seconds.
+#
+# Possible values:
+#
+# * 0: Disables the option (default).
+# * Any positive integer in seconds: Enables the option.
+#  (integer value)
+# Minimum value: 0
+#reboot_timeout=0
+
+#
+# Maximum time in seconds that an instance can take to build.
+#
+# If this timer expires, instance status will be changed to ERROR.
+# Enabling this option will make sure an instance will not be stuck
+# in BUILD state for a longer period.
+#
+# Possible values:
+#
+# * 0: Disables the option (default)
+# * Any positive integer in seconds: Enables the option.
+#  (integer value)
+# Minimum value: 0
+#instance_build_timeout=0
+
+#
+# Interval to wait before un-rescuing an instance stuck in RESCUE.
+#
+# Possible values:
+#
+# * 0: Disables the option (default)
+# * Any positive integer in seconds: Enables the option.
+#  (integer value)
+# Minimum value: 0
+#rescue_timeout=0
+
+#
+# Automatically confirm resizes after N seconds.
+#
+# Resize functionality will save the existing server before resizing.
+# After the resize completes, user is requested to confirm the resize.
+# The user has the opportunity to either confirm or revert all
+# changes. Confirm resize removes the original server and changes
+# server status from resized to active. Setting this option to a time
+# period (in seconds) will automatically confirm the resize if the
+# server is in resized state longer than that time.
+#
+# Possible values:
+#
+# * 0: Disables the option (default)
+# * Any positive integer in seconds: Enables the option.
+#  (integer value)
+# Minimum value: 0
+#resize_confirm_window=0
+
+#
+# Total time to wait in seconds for an instance toperform a clean
+# shutdown.
+#
+# It determines the overall period (in seconds) a VM is allowed to
+# perform a clean shutdown. While performing stop, rescue and shelve,
+# rebuild operations, configuring this option gives the VM a chance
+# to perform a controlled shutdown before the instance is powered off.
+# The default timeout is 60 seconds.
+#
+# The timeout value can be overridden on a per image basis by means
+# of os_shutdown_timeout that is an image metadata setting allowing
+# different types of operating systems to specify how much time they
+# need to shut down cleanly.
+#
+# Possible values:
+#
+# * Any positive integer in seconds (default value is 60).
+#  (integer value)
+# Minimum value: 1
+#shutdown_timeout=60
+
+#
+# The compute service periodically checks for instances that have been
+# deleted in the database but remain running on the compute node. The
+# above option enables action to be taken when such instances are
+# identified.
+#
+# Possible values:
+#
+# * reap: Powers down the instances and deletes them(default)
+# * log: Logs warning message about deletion of the resource
+# * shutdown: Powers down instances and marks them as non-
+#   bootable which can be later used for debugging/analysis
+# * noop: Takes no action
+#
+# Related options:
+#
+# * running_deleted_instance_poll
+# * running_deleted_instance_timeout
+#  (string value)
+# Allowed values: noop, log, shutdown, reap
+#running_deleted_instance_action=reap
+
+#
+# Time interval in seconds to wait between runs for the clean up action.
+# If set to 0, above check will be disabled. If "running_deleted_instance
+# _action" is set to "log" or "reap", a value greater than 0 must be set.
+#
+# Possible values:
+#
+# * Any positive integer in seconds enables the option.
+# * 0: Disables the option.
+# * 1800: Default value.
+#
+# Related options:
+#
+# * running_deleted_instance_action
+#  (integer value)
+#running_deleted_instance_poll_interval=1800
+
+#
+# Time interval in seconds to wait for the instances that have
+# been marked as deleted in database to be eligible for cleanup.
+#
+# Possible values:
+#
+# * Any positive integer in seconds(default is 0).
+#
+# Related options:
+#
+# * "running_deleted_instance_action"
+#  (integer value)
+#running_deleted_instance_timeout=0
+
+#
+# The number of times to attempt to reap an instance's files.
+#
+# This option specifies the maximum number of retry attempts
+# that can be made.
+#
+# Possible values:
+#
+# * Any positive integer defines how many attempts are made.
+# * Any value <=0 means no delete attempts occur, but you should use
+#   ``instance_delete_interval`` to disable the delete attempts.
+#
+# Related options:
+# * ``instance_delete_interval`` in interval_opts group can be used to disable
+#   this option.
+#  (integer value)
+#maximum_instance_delete_attempts=5
+
+# DEPRECATED:
+# This is the message queue topic that the compute service 'listens' on. It is
+# used when the compute service is started up to configure the queue, and
+# whenever an RPC call to the compute service is made.
+#
+# Possible values:
+#
+# * Any string, but there is almost never any reason to ever change this value
+#   from its default of 'compute'.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# There is no need to let users choose the RPC topic for all services - there
+# is little gain from this. Furthermore, it makes it really easy to break Nova
+# by using this option.
+#compute_topic=compute
+
+#
+# Sets the scope of the check for unique instance names.
+#
+# The default doesn't check for unique names. If a scope for the name check is
+# set, a launch of a new instance or an update of an existing instance with a
+# duplicate name will result in an ''InstanceExists'' error. The uniqueness is
+# case-insensitive. Setting this option can increase the usability for end
+# users as they don't have to distinguish among instances with the same name
+# by their IDs.
+#
+# Possible values:
+#
+# * '': An empty value means that no uniqueness check is done and duplicate
+#   names are possible.
+# * "project": The instance name check is done only for instances within the
+#   same project.
+# * "global": The instance name check is done for all instances regardless of
+#   the project.
+#  (string value)
+# Allowed values: '', project, global
+#osapi_compute_unique_server_name_scope =
+
+#
+# Enable new services on this host automatically.
+#
+# When a new service (for example "nova-compute") starts up, it gets
+# registered in the database as an enabled service. Sometimes it can be useful
+# to register new services in disabled state and then enabled them at a later
+# point in time. This option can set this behavior for all services per host.
+#
+# Possible values:
+#
+# * ``True``: Each new service is enabled as soon as it registers itself.
+# * ``False``: Services must be enabled via a REST API call or with the CLI
+#   with ``nova service-enable <hostname> <binary>``, otherwise they are not
+#   ready to use.
+#  (boolean value)
+#enable_new_services=true
+
+#
+# Template string to be used to generate instance names.
+#
+# This template controls the creation of the database name of an instance. This
+# is *not* the display name you enter when creating an instance (via Horizon
+# or CLI). For a new deployment it is advisable to change the default value
+# (which uses the database autoincrement) to another value which makes use
+# of the attributes of an instance, like ``instance-%(uuid)s``. If you
+# already have instances in your deployment when you change this, your
+# deployment will break.
+#
+# Possible values:
+#
+# * A string which either uses the instance database ID (like the
+#   default)
+# * A string with a list of named database columns, for example ``%(id)d``
+#   or ``%(uuid)s`` or ``%(hostname)s``.
+#
+# Related options:
+#
+# * not to be confused with: ``multi_instance_display_name_template``
+#  (string value)
+#instance_name_template=instance-%08x
+
+#
+# Number of times to retry live-migration before failing.
+#
+# Possible values:
+#
+# * If == -1, try until out of hosts (default)
+# * If == 0, only try once, no retries
+# * Integer greater than 0
+#  (integer value)
+# Minimum value: -1
+#migrate_max_retries=-1
+
+#
+# Configuration drive format
+#
+# Configuration drive format that will contain metadata attached to the
+# instance when it boots.
+#
+# Possible values:
+#
+# * iso9660: A file system image standard that is widely supported across
+#   operating systems. NOTE: Mind the libvirt bug
+#   (https://bugs.launchpad.net/nova/+bug/1246201) - If your hypervisor
+#   driver is libvirt, and you want live migrate to work without shared storage,
+#   then use VFAT.
+# * vfat: For legacy reasons, you can configure the configuration drive to
+#   use VFAT format instead of ISO 9660.
+#
+# Related options:
+#
+# * This option is meaningful when one of the following alternatives occur:
+#   1. force_config_drive option set to 'true'
+#   2. the REST API call to create the instance contains an enable flag for
+#      config drive option
+#   3. the image used to create the instance requires a config drive,
+#      this is defined by img_config_drive property for that image.
+# * A compute node running Hyper-V hypervisor can be configured to attach
+#   configuration drive as a CD drive. To attach the configuration drive as a CD
+#   drive, set config_drive_cdrom option at hyperv section, to true.
+#  (string value)
+# Allowed values: iso9660, vfat
+#config_drive_format=iso9660
+config_drive_format=vfat
+
+#
+# Force injection to take place on a config drive
+#
+# When this option is set to true configuration drive functionality will be
+# forced enabled by default, otherwise user can still enable configuration
+# drives via the REST API or image metadata properties.
+#
+# Possible values:
+#
+# * True: Force to use of configuration drive regardless the user's input in the
+#         REST API call.
+# * False: Do not force use of configuration drive. Config drives can still be
+#          enabled via the REST API or image metadata properties.
+#
+# Related options:
+#
+# * Use the 'mkisofs_cmd' flag to set the path where you install the
+#   genisoimage program. If genisoimage is in same path as the
+#   nova-compute service, you do not need to set this flag.
+# * To use configuration drive with Hyper-V, you must set the
+#   'mkisofs_cmd' value to the full path to an mkisofs.exe installation.
+#   Additionally, you must set the qemu_img_cmd value in the hyperv
+#   configuration section to the full path to an qemu-img command
+#   installation.
+#  (boolean value)
+#force_config_drive=false
+force_config_drive=true
+
+#
+# Name or path of the tool used for ISO image creation
+#
+# Use the mkisofs_cmd flag to set the path where you install the genisoimage
+# program. If genisoimage is on the system path, you do not need to change
+# the default value.
+#
+# To use configuration drive with Hyper-V, you must set the mkisofs_cmd value
+# to the full path to an mkisofs.exe installation. Additionally, you must set
+# the qemu_img_cmd value in the hyperv configuration section to the full path
+# to an qemu-img command installation.
+#
+# Possible values:
+#
+# * Name of the ISO image creator program, in case it is in the same directory
+#   as the nova-compute service
+# * Path to ISO image creator program
+#
+# Related options:
+#
+# * This option is meaningful when config drives are enabled.
+# * To use configuration drive with Hyper-V, you must set the qemu_img_cmd
+#   value in the hyperv configuration section to the full path to an qemu-img
+#   command installation.
+#  (string value)
+#mkisofs_cmd=genisoimage
+
+# DEPRECATED:
+# nova-console-proxy is used to set up multi-tenant VM console access.
+# This option allows pluggable driver program for the console session
+# and represents driver to use for the console proxy.
+#
+# Possible values:
+#
+# * A string representing fully classified class name of console driver.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option no longer does anything. Previously this option had only two
+# valid,
+# in-tree values: nova.console.xvp.XVPConsoleProxy and
+# nova.console.fake.FakeConsoleProxy. The latter of these was only used in tests
+# and has since been replaced.
+#console_driver=nova.console.xvp.XVPConsoleProxy
+
+# DEPRECATED:
+# Represents the message queue topic name used by nova-console
+# service when communicating via the AMQP server. The Nova API uses a message
+# queue to communicate with nova-console to retrieve a console URL for that
+# host.
+#
+# Possible values:
+#
+# * A string representing topic exchange name
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# There is no need to let users choose the RPC topic for all services - there
+# is little gain from this. Furthermore, it makes it really easy to break Nova
+# by using this option.
+#console_topic=console
+
+# DEPRECATED:
+# This option allows you to change the message topic used by nova-consoleauth
+# service when communicating via the AMQP server. Nova Console Authentication
+# server authenticates nova consoles. Users can then access their instances
+# through VNC clients. The Nova API service uses a message queue to
+# communicate with nova-consoleauth to get a VNC console.
+#
+# Possible Values:
+#
+# * 'consoleauth' (default) or Any string representing topic exchange name.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# There is no need to let users choose the RPC topic for all services - there
+# is little gain from this. Furthermore, it makes it really easy to break Nova
+# by using this option.
+#consoleauth_topic=consoleauth
+
+# DEPRECATED: The driver to use for database access (string value)
+# This option is deprecated for removal since 13.0.0.
+# Its value may be silently ignored in the future.
+#db_driver=nova.db
+
+# DEPRECATED:
+# Default flavor to use for the EC2 API only.
+# The Nova API does not support a default flavor.
+#  (string value)
+# This option is deprecated for removal since 14.0.0.
+# Its value may be silently ignored in the future.
+# Reason: The EC2 API is deprecated.
+#default_flavor=m1.small
+
+#
+# Default pool for floating IPs.
+#
+# This option specifies the default floating IP pool for allocating floating
+# IPs.
+#
+# While allocating a floating ip, users can optionally pass in the name of the
+# pool they want to allocate from, otherwise it will be pulled from the
+# default pool.
+#
+# If this option is not set, then 'nova' is used as default floating pool.
+#
+# Possible values:
+#
+# * Any string representing a floating IP pool name
+#  (string value)
+#default_floating_pool=nova
+
+# DEPRECATED:
+# Autoassigning floating IP to VM
+#
+# When set to True, floating IP is auto allocated and associated
+# to the VM upon creation.
+#
+# Related options:
+#
+# * use_neutron: this options only works with nova-network.
+#  (boolean value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#auto_assign_floating_ip=false
+
+# DEPRECATED:
+# Full class name for the DNS Manager for floating IPs.
+#
+# This option specifies the class of the driver that provides functionality
+# to manage DNS entries associated with floating IPs.
+#
+# When a user adds a DNS entry for a specified domain to a floating IP,
+# nova will add a DNS entry using the specified floating DNS driver.
+# When a floating IP is deallocated, its DNS entry will automatically be
+# deleted.
+#
+# Possible values:
+#
+# * Full Python path to the class to be used
+#
+# Related options:
+#
+# * use_neutron: this options only works with nova-network.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#floating_ip_dns_manager=nova.network.noop_dns_driver.NoopDNSDriver
+
+# DEPRECATED:
+# Full class name for the DNS Manager for instance IPs.
+#
+# This option specifies the class of the driver that provides functionality
+# to manage DNS entries for instances.
+#
+# On instance creation, nova will add DNS entries for the instance name and
+# id, using the specified instance DNS driver and domain. On instance deletion,
+# nova will remove the DNS entries.
+#
+# Possible values:
+#
+# * Full Python path to the class to be used
+#
+# Related options:
+#
+# * use_neutron: this options only works with nova-network.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#instance_dns_manager=nova.network.noop_dns_driver.NoopDNSDriver
+
+# DEPRECATED:
+# If specified, Nova checks if the availability_zone of every instance matches
+# what the database says the availability_zone should be for the specified
+# dns_domain.
+#
+# Related options:
+#
+# * use_neutron: this options only works with nova-network.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#instance_dns_domain =
+
+#
+# Abstracts out IPv6 address generation to pluggable backends.
+#
+# nova-network can be put into dual-stack mode, so that it uses
+# both IPv4 and IPv6 addresses. In dual-stack mode, by default, instances
+# acquire IPv6 global unicast addresses with the help of stateless address
+# auto-configuration mechanism.
+#
+# Related options:
+#
+# * use_neutron: this option only works with nova-network.
+# * use_ipv6: this option only works if ipv6 is enabled for nova-network.
+#  (string value)
+# Allowed values: rfc2462, account_identifier
+#ipv6_backend=rfc2462
+
+#
+# The IP address which the host is using to connect to the management network.
+#
+# Possible values:
+#
+# * String with valid IP address. Default is IPv4 address of this host.
+#
+# Related options:
+#
+# * metadata_host
+# * my_block_storage_ip
+# * routing_source_ip
+# * vpn_ip
+#  (string value)
+#my_ip=10.89.104.70
+my_ip=192.168.10.53
+
+#
+# The IP address which is used to connect to the block storage network.
+#
+# Possible values:
+#
+# * String with valid IP address. Default is IP address of this host.
+#
+# Related options:
+#
+# * my_ip - if my_block_storage_ip is not set, then my_ip value is used.
+#  (string value)
+#my_block_storage_ip=$my_ip
+
+#
+# Hostname, FQDN or IP address of this host. Must be valid within AMQP key.
+#
+# Possible values:
+#
+# * String with hostname, FQDN or IP address. Default is hostname of this host.
+#  (string value)
+#host=lcy01-22
+
+#
+# Assign IPv6 and IPv4 addresses when creating instances.
+#
+# Related options:
+#
+# * use_neutron: this only works with nova-network.
+#  (boolean value)
+#use_ipv6=false
+
+#
+# This option is a list of full paths to one or more configuration files for
+# dhcpbridge. In most cases the default path of '/etc/nova/nova-dhcpbridge.conf'
+# should be sufficient, but if you have special needs for configuring
+# dhcpbridge,
+# you can change or add to this list.
+#
+# Possible values
+#
+#     A list of strings, where each string is the full path to a dhcpbridge
+#     configuration file.
+#  (multi valued)
+dhcpbridge_flagfile=/etc/nova/nova.conf
+
+#
+# The location where the network configuration files will be kept. The default
+# is
+# the 'networks' directory off of the location where nova's Python module is
+# installed.
+#
+# Possible values
+#
+#     A string containing the full path to the desired configuration directory
+#  (string value)
+#networks_path=$state_path/networks
+
+#
+# This is the name of the network interface for public IP addresses. The default
+# is 'eth0'.
+#
+# Possible values:
+#
+#     Any string representing a network interface name
+#  (string value)
+#public_interface=eth0
+
+#
+# The location of the binary nova-dhcpbridge. By default it is the binary named
+# 'nova-dhcpbridge' that is installed with all the other nova binaries.
+#
+# Possible values:
+#
+#     Any string representing the full path to the binary for dhcpbridge
+#  (string value)
+dhcpbridge=/usr/bin/nova-dhcpbridge
+
+#
+# This is the public IP address of the network host. It is used when creating a
+# SNAT rule.
+#
+# Possible values:
+#
+#     Any valid IP address
+#
+# Related options:
+#
+#     force_snat_range
+#  (string value)
+#routing_source_ip=$my_ip
+
+#
+# The lifetime of a DHCP lease, in seconds. The default is 86400 (one day).
+#
+# Possible values:
+#
+#     Any positive integer value.
+#  (integer value)
+# Minimum value: 1
+#dhcp_lease_time=86400
+
+#
+# Despite the singular form of the name of this option, it is actually a list of
+# zero or more server addresses that dnsmasq will use for DNS nameservers. If
+# this is not empty, dnsmasq will not read /etc/resolv.conf, but will only use
+# the servers specified in this option. If the option use_network_dns_servers is
+# True, the dns1 and dns2 servers from the network will be appended to this
+# list,
+# and will be used as DNS servers, too.
+#
+# Possible values:
+#
+#     A list of strings, where each string is either an IP address or a FQDN.
+#
+# Related options:
+#
+#     use_network_dns_servers
+#  (multi valued)
+#dns_server =
+
+#
+# When this option is set to True, the dns1 and dns2 servers for the network
+# specified by the user on boot will be used for DNS, as well as any specified
+# in
+# the `dns_server` option.
+#
+# Related options:
+#
+#     dns_server
+#  (boolean value)
+#use_network_dns_servers=false
+
+#
+# This option is a list of zero or more IP address ranges in your network's DMZ
+# that should be accepted.
+#
+# Possible values:
+#
+#     A list of strings, each of which should be a valid CIDR.
+#  (list value)
+#dmz_cidr =
+
+#
+# This is a list of zero or more IP ranges that traffic from the
+# `routing_source_ip` will be SNATted to. If the list is empty, then no SNAT
+# rules are created.
+#
+# Possible values:
+#
+#     A list of strings, each of which should be a valid CIDR.
+#
+# Related options:
+#
+#     routing_source_ip
+#  (multi valued)
+#force_snat_range =
+
+#
+# The path to the custom dnsmasq configuration file, if any.
+#
+# Possible values:
+#
+#     The full path to the configuration file, or an empty string if there is no
+#     custom dnsmasq configuration file.
+#  (string value)
+#dnsmasq_config_file =
+
+#
+# This is the class used as the ethernet device driver for linuxnet bridge
+# operations. The default value should be all you need for most cases, but if
+# you
+# wish to use a customized class, set this option to the full dot-separated
+# import path for that class.
+#
+# Possible values:
+#
+#     Any string representing a dot-separated class path that Nova can import.
+#  (string value)
+#linuxnet_interface_driver=nova.network.linux_net.LinuxBridgeInterfaceDriver
+
+#
+# The name of the Open vSwitch bridge that is used with linuxnet when connecting
+# with Open vSwitch."
+#
+# Possible values:
+#
+#     Any string representing a valid bridge name.
+#  (string value)
+#linuxnet_ovs_integration_bridge=br-int
+
+#
+# When True, when a device starts up, and upon binding floating IP addresses,
+# arp
+# messages will be sent to ensure that the arp caches on the compute hosts are
+# up-to-date.
+#
+# Related options:
+#
+#     send_arp_for_ha_count
+#  (boolean value)
+#send_arp_for_ha=false
+
+#
+# When arp messages are configured to be sent, they will be sent with the count
+# set to the value of this option. Of course, if this is set to zero, no arp
+# messages will be sent.
+#
+# Possible values:
+#
+#     Any integer greater than or equal to 0
+#
+# Related options:
+#
+#     send_arp_for_ha
+#  (integer value)
+#send_arp_for_ha_count=3
+
+#
+# When set to True, only the firt nic of a VM will get its default gateway from
+# the DHCP server.
+#  (boolean value)
+#use_single_default_gateway=false
+
+#
+# One or more interfaces that bridges can forward traffic to. If any of the
+# items
+# in this list is the special keyword 'all', then all traffic will be forwarded.
+#
+# Possible values:
+#
+#     A list of zero or more interface names, or the word 'all'.
+#  (multi valued)
+#forward_bridge_interface=all
+
+#
+# This option determines the IP address for the network metadata API server.
+#
+# Possible values:
+#
+#    * Any valid IP address. The default is the address of the Nova API server.
+#
+# Related options:
+#
+#     * metadata_port
+#  (string value)
+#metadata_host=$my_ip
+
+#
+# This option determines the port used for the metadata API server.
+#
+# Related options:
+#
+#     * metadata_host
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#metadata_port=8775
+
+#
+# This expression, if defined, will select any matching iptables rules and place
+# them at the top when applying metadata changes to the rules.
+#
+# Possible values:
+#
+#     * Any string representing a valid regular expression, or an empty string
+#
+# Related options:
+#
+#     * iptables_bottom_regex
+#  (string value)
+#iptables_top_regex =
+
+#
+# This expression, if defined, will select any matching iptables rules and place
+# them at the bottom when applying metadata changes to the rules.
+#
+# Possible values:
+#
+#     * Any string representing a valid regular expression, or an empty string
+#
+# Related options:
+#
+#     * iptables_top_regex
+#  (string value)
+#iptables_bottom_regex =
+
+#
+# By default, packets that do not pass the firewall are DROPped. In many cases,
+# though, an operator may find it more useful to change this from DROP to
+# REJECT,
+# so that the user issuing those packets may have a better idea as to what's
+# going on, or LOGDROP in order to record the blocked traffic before DROPping.
+#
+# Possible values:
+#
+#     * A string representing an iptables chain. The default is DROP.
+#  (string value)
+#iptables_drop_action=DROP
+
+#
+# This option represents the period of time, in seconds, that the ovs_vsctl
+# calls
+# will wait for a response from the database before timing out. A setting of 0
+# means that the utility should wait forever for a response.
+#
+# Possible values:
+#
+#     * Any positive integer if a limited timeout is desired, or zero if the
+#     calls should wait forever for a response.
+#  (integer value)
+# Minimum value: 0
+#ovs_vsctl_timeout=120
+
+#
+# This option is used mainly in testing to avoid calls to the underlying network
+# utilities.
+#  (boolean value)
+#fake_network=false
+
+#
+# This option determines the number of times to retry ebtables commands before
+# giving up. The minimum number of retries is 1.
+#
+# Possible values:
+#
+#     * Any positive integer
+#
+# Related options:
+#
+#     * ebtables_retry_interval
+#  (integer value)
+# Minimum value: 1
+#ebtables_exec_attempts=3
+
+#
+# This option determines the time, in seconds, that the system will sleep in
+# between ebtables retries. Note that each successive retry waits a multiple of
+# this value, so for example, if this is set to the default of 1.0 seconds, and
+# ebtables_exec_attempts is 4, after the first failure, the system will sleep
+# for
+# 1 * 1.0 seconds, after the second failure it will sleep 2 * 1.0 seconds, and
+# after the third failure it will sleep 3 * 1.0 seconds.
+#
+# Possible values:
+#
+#     * Any non-negative float or integer. Setting this to zero will result in
+# no
+#     waiting between attempts.
+#
+# Related options:
+#
+#     * ebtables_exec_attempts
+#  (floating point value)
+#ebtables_retry_interval=1.0
+
+#
+# This option determines whether the network setup information is injected into
+# the VM before it is booted. While it was originally designed to be used only
+# by
+# nova-network, it is also used by the vmware and xenapi virt drivers to control
+# whether network information is injected into a VM.
+#  (boolean value)
+#flat_injected=false
+
+# DEPRECATED:
+# This option determines the bridge used for simple network interfaces when no
+# bridge is specified in the VM creation request.
+#
+# Please note that this option is only used when using nova-network instead of
+# Neutron in your deployment.
+#
+# Possible values:
+#
+#     Any string representing a valid network bridge, such as 'br100'
+#
+# Related options:
+#
+#     ``use_neutron``
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#flat_network_bridge=<None>
+
+# DEPRECATED:
+# This is the address of the DNS server for a simple network. If this option is
+# not specified, the default of '8.8.4.4' is used.
+#
+# Please note that this option is only used when using nova-network instead of
+# Neutron in your deployment.
+#
+# Possible values:
+#
+#     Any valid IP address.
+#
+# Related options:
+#
+#     ``use_neutron``
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#flat_network_dns=8.8.4.4
+
+# DEPRECATED:
+# This option is the name of the virtual interface of the VM on which the bridge
+# will be built. While it was originally designed to be used only by
+# nova-network, it is also used by libvirt for the bridge interface name.
+#
+# Possible values:
+#
+#     Any valid virtual interface name, such as 'eth0'
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#flat_interface=<None>
+
+# DEPRECATED:
+# This is the VLAN number used for private networks. Note that the when creating
+# the networks, if the specified number has already been assigned, nova-network
+# will increment this number until it finds an available VLAN.
+#
+# Please note that this option is only used when using nova-network instead of
+# Neutron in your deployment. It also will be ignored if the configuration
+# option
+# for `network_manager` is not set to the default of
+# 'nova.network.manager.VlanManager'.
+#
+# Possible values:
+#
+#     Any integer between 1 and 4094. Values outside of that range will raise a
+#     ValueError exception. Default = 100.
+#
+# Related options:
+#
+#     ``network_manager``, ``use_neutron``
+#  (integer value)
+# Minimum value: 1
+# Maximum value: 4094
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#vlan_start=100
+
+# DEPRECATED:
+# This option is the name of the virtual interface of the VM on which the VLAN
+# bridge will be built. While it was originally designed to be used only by
+# nova-network, it is also used by libvirt and xenapi for the bridge interface
+# name.
+#
+# Please note that this setting will be ignored in nova-network if the
+# configuration option for `network_manager` is not set to the default of
+# 'nova.network.manager.VlanManager'.
+#
+# Possible values:
+#
+#     Any valid virtual interface name, such as 'eth0'
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options. While
+# this option has an effect when using neutron, it incorrectly override the
+# value
+# provided by neutron and should therefore not be used.
+#vlan_interface=<None>
+
+# DEPRECATED:
+# This option represents the number of networks to create if not explicitly
+# specified when the network is created. The only time this is used is if a CIDR
+# is specified, but an explicit network_size is not. In that case, the subnets
+# are created by diving the IP address space of the CIDR by num_networks. The
+# resulting subnet sizes cannot be larger than the configuration option
+# `network_size`; in that event, they are reduced to `network_size`, and a
+# warning is logged.
+#
+# Please note that this option is only used when using nova-network instead of
+# Neutron in your deployment.
+#
+# Possible values:
+#
+#     Any positive integer is technically valid, although there are practical
+#     limits based upon available IP address space and virtual interfaces. The
+#     default is 1.
+#
+# Related options:
+#
+#     ``use_neutron``, ``network_size``
+#  (integer value)
+# Minimum value: 1
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#num_networks=1
+
+# DEPRECATED:
+# This is the public IP address for the cloudpipe VPN servers. It defaults to
+# the
+# IP address of the host.
+#
+# Please note that this option is only used when using nova-network instead of
+# Neutron in your deployment. It also will be ignored if the configuration
+# option
+# for `network_manager` is not set to the default of
+# 'nova.network.manager.VlanManager'.
+#
+# Possible values:
+#
+#     Any valid IP address. The default is $my_ip, the IP address of the VM.
+#
+# Related options:
+#
+#     ``network_manager``, ``use_neutron``, ``vpn_start``
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#vpn_ip=$my_ip
+
+# DEPRECATED:
+# This is the port number to use as the first VPN port for private networks.
+#
+# Please note that this option is only used when using nova-network instead of
+# Neutron in your deployment. It also will be ignored if the configuration
+# option
+# for `network_manager` is not set to the default of
+# 'nova.network.manager.VlanManager', or if you specify a value the 'vpn_start'
+# parameter when creating a network.
+#
+# Possible values:
+#
+#     Any integer representing a valid port number. The default is 1000.
+#
+# Related options:
+#
+#     ``use_neutron``, ``vpn_ip``, ``network_manager``
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#vpn_start=1000
+
+# DEPRECATED:
+# This option determines the number of addresses in each private subnet.
+#
+# Please note that this option is only used when using nova-network instead of
+# Neutron in your deployment.
+#
+# Possible values:
+#
+#     Any positive integer that is less than or equal to the available network
+#     size. Note that if you are creating multiple networks, they must all fit
+# in
+#     the available IP address space. The default is 256.
+#
+# Related options:
+#
+#     ``use_neutron``, ``num_networks``
+#  (integer value)
+# Minimum value: 1
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#network_size=256
+
+# DEPRECATED:
+# This option determines the fixed IPv6 address block when creating a network.
+#
+# Please note that this option is only used when using nova-network instead of
+# Neutron in your deployment.
+#
+# Possible values:
+#
+#     Any valid IPv6 CIDR. The default value is "fd00::/48".
+#
+# Related options:
+#
+#     ``use_neutron``
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#fixed_range_v6=fd00::/48
+
+# DEPRECATED:
+# This is the default IPv4 gateway. It is used only in the testing suite.
+#
+# Please note that this option is only used when using nova-network instead of
+# Neutron in your deployment.
+#
+# Possible values:
+#
+#     Any valid IP address.
+#
+# Related options:
+#
+#     ``use_neutron``, ``gateway_v6``
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#gateway=<None>
+
+# DEPRECATED:
+# This is the default IPv6 gateway. It is used only in the testing suite.
+#
+# Please note that this option is only used when using nova-network instead of
+# Neutron in your deployment.
+#
+# Possible values:
+#
+#     Any valid IP address.
+#
+# Related options:
+#
+#     ``use_neutron``, ``gateway``
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#gateway_v6=<None>
+
+# DEPRECATED:
+# This option represents the number of IP addresses to reserve at the top of the
+# address range for VPN clients. It also will be ignored if the configuration
+# option for `network_manager` is not set to the default of
+# 'nova.network.manager.VlanManager'.
+#
+# Possible values:
+#
+#     Any integer, 0 or greater. The default is 0.
+#
+# Related options:
+#
+#     ``use_neutron``, ``network_manager``
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#cnt_vpn_clients=0
+
+# DEPRECATED:
+# This is the number of seconds to wait before disassociating a deallocated
+# fixed
+# IP address. This is only used with the nova-network service, and has no effect
+# when using neutron for networking.
+#
+# Possible values:
+#
+#     Any integer, zero or greater. The default is 600 (10 minutes).
+#
+# Related options:
+#
+#     ``use_neutron``
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#fixed_ip_disassociate_timeout=600
+
+# DEPRECATED:
+# This option determines how many times nova-network will attempt to create a
+# unique MAC address before giving up and raising a
+# `VirtualInterfaceMacAddressException` error.
+#
+# Possible values:
+#
+#     Any positive integer. The default is 5.
+#
+# Related options:
+#
+#     ``use_neutron``
+#  (integer value)
+# Minimum value: 1
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#create_unique_mac_address_attempts=5
+
+# DEPRECATED:
+# Determines whether unused gateway devices, both VLAN and bridge, are deleted
+# if
+# the network is in nova-network VLAN mode and is multi-hosted.
+#
+# Related options:
+#
+#     ``use_neutron``, ``vpn_ip``, ``fake_network``
+#  (boolean value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#teardown_unused_network_gateway=false
+
+# DEPRECATED:
+# When this option is True, a call is made to release the DHCP for the instance
+# when that instance is terminated.
+#
+# Related options:
+#
+#     ``use_neutron``
+#  (boolean value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+force_dhcp_release=true
+
+# DEPRECATED:
+# When this option is True, whenever a DNS entry must be updated, a fanout cast
+# message is sent to all network hosts to update their DNS entries in multi-host
+# mode.
+#
+# Related options:
+#
+#     ``use_neutron``
+#  (boolean value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#update_dns_entries=false
+
+# DEPRECATED:
+# This option determines the time, in seconds, to wait between refreshing DNS
+# entries for the network.
+#
+# Possible values:
+#
+#     Either -1 (default), or any positive integer. A negative value will
+# disable
+#     the updates.
+#
+# Related options:
+#
+#     ``use_neutron``
+#  (integer value)
+# Minimum value: -1
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#dns_update_periodic_interval=-1
+
+# DEPRECATED:
+# This option allows you to specify the domain for the DHCP server.
+#
+# Possible values:
+#
+#     Any string that is a valid domain name.
+#
+# Related options:
+#
+#     ``use_neutron``
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#dhcp_domain=novalocal
+dhcp_domain=novalocal
+
+# DEPRECATED:
+# This option allows you to specify the L3 management library to be used.
+#
+# Possible values:
+#
+#     Any dot-separated string that represents the import path to an L3
+#     networking library.
+#
+# Related options:
+#
+#     ``use_neutron``
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#l3_lib=nova.network.l3.LinuxNetL3
+
+# DEPRECATED:
+# THIS VALUE SHOULD BE SET WHEN CREATING THE NETWORK.
+#
+# If True in multi_host mode, all compute hosts share the same dhcp address. The
+# same IP address used for DHCP will be added on each nova-network node which is
+# only visible to the VMs on the same host.
+#
+# The use of this configuration has been deprecated and may be removed in any
+# release after Mitaka. It is recommended that instead of relying on this
+# option,
+# an explicit value should be passed to 'create_networks()' as a keyword
+# argument
+# with the name 'share_address'.
+#  (boolean value)
+# This option is deprecated for removal since 2014.2.
+# Its value may be silently ignored in the future.
+#share_dhcp_address=false
+
+# DEPRECATED: Whether to use Neutron or Nova Network as the back end for
+# networking. Defaults to False (indicating Nova network).Set to True to use
+# neutron. (boolean value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#use_neutron=true
+
+#
+# URL for LDAP server which will store DNS entries
+#
+# Possible values:
+#
+# * A valid LDAP URL representing the server
+#  (uri value)
+#ldap_dns_url=ldap://ldap.example.com:389
+
+# Bind user for LDAP server (string value)
+#ldap_dns_user=uid=admin,ou=people,dc=example,dc=org
+
+# Bind user's password for LDAP server (string value)
+#ldap_dns_password=password
+
+#
+# Hostmaster for LDAP DNS driver Statement of Authority
+#
+# Possible values:
+#
+# * Any valid string representing LDAP DNS hostmaster.
+#  (string value)
+#ldap_dns_soa_hostmaster=hostmaster@example.org
+
+#
+# DNS Servers for LDAP DNS driver
+#
+# Possible values:
+#
+# * A valid URL representing a DNS server
+#  (multi valued)
+#ldap_dns_servers=dns.example.org
+
+#
+# Base distinguished name for the LDAP search query
+#
+# This option helps to decide where to look up the host in LDAP.
+#  (string value)
+#ldap_dns_base_dn=ou=hosts,dc=example,dc=org
+
+#
+# Refresh interval (in seconds) for LDAP DNS driver Start of Authority
+#
+# Time interval, a secondary/slave DNS server waits before requesting for
+# primary DNS server's current SOA record. If the records are different,
+# secondary DNS server will request a zone transfer from primary.
+#
+# NOTE: Lower values would cause more traffic.
+#  (integer value)
+#ldap_dns_soa_refresh=1800
+
+#
+# Retry interval (in seconds) for LDAP DNS driver Start of Authority
+#
+# Time interval, a secondary/slave DNS server should wait, if an
+# attempt to transfer zone failed during the previous refresh interval.
+#  (integer value)
+#ldap_dns_soa_retry=3600
+
+#
+# Expiry interval (in seconds) for LDAP DNS driver Start of Authority
+#
+# Time interval, a secondary/slave DNS server holds the information
+# before it is no longer considered authoritative.
+#  (integer value)
+#ldap_dns_soa_expiry=86400
+
+#
+# Minimum interval (in seconds) for LDAP DNS driver Start of Authority
+#
+# It is Minimum time-to-live applies for all resource records in the
+# zone file. This value is supplied to other servers how long they
+# should keep the data in cache.
+#  (integer value)
+#ldap_dns_soa_minimum=7200
+
+# DEPRECATED: The topic network nodes listen on (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# There is no need to let users choose the RPC topic for all services - there
+# is little gain from this. Furthermore, it makes it really easy to break Nova
+# by using this option.
+#network_topic=network
+
+# DEPRECATED:
+# Default value for multi_host in networks.
+#
+# nova-network service can operate in a multi-host or single-host mode.
+# In multi-host mode each compute node runs a copy of nova-network and the
+# instances on that compute node use the compute node as a gateway to the
+# Internet. Where as in single-host mode, a central server runs the nova-network
+# service. All compute nodes forward traffic from the instances to the
+# cloud controller which then forwards traffic to the Internet.
+#
+# If this options is set to true, some rpc network calls will be sent directly
+# to host.
+#
+# Note that this option is only used when using nova-network instead of
+# Neutron in your deployment.
+#
+# Related options:
+#
+# * use_neutron
+#  (boolean value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#multi_host=false
+
+# DEPRECATED:
+# Driver to use for network creation.
+#
+# Network driver initializes (creates bridges and so on) only when the
+# first VM lands on a host node. All network managers configure the
+# network using network drivers. The driver is not tied to any particular
+# network manager.
+#
+# The default Linux driver implements vlans, bridges, and iptables rules
+# using linux utilities.
+#
+# Note that this option is only used when using nova-network instead
+# of Neutron in your deployment.
+#
+# Related options:
+#
+# * use_neutron
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#network_driver=nova.network.linux_net
+
+#
+# Firewall driver to use with ``nova-network`` service.
+#
+# This option only applies when using the ``nova-network`` service. When using
+# another networking services, such as Neutron, this should be to set to the
+# ``nova.virt.firewall.NoopFirewallDriver``.
+#
+# If unset (the default), this will default to the hypervisor-specified
+# default driver.
+#
+# Possible values:
+#
+# * nova.virt.firewall.IptablesFirewallDriver
+# * nova.virt.firewall.NoopFirewallDriver
+# * nova.virt.libvirt.firewall.IptablesFirewallDriver
+# * [...]
+#
+# Related options:
+#
+# * ``use_neutron``: This must be set to ``False`` to enable ``nova-network``
+#   networking
+#  (string value)
+#firewall_driver=<None>
+firewall_driver = nova.virt.firewall.NoopFirewallDriver
+
+#
+# Determine whether to allow network traffic from same network.
+#
+# When set to true, hosts on the same subnet are not filtered and are allowed
+# to pass all types of traffic between them. On a flat network, this allows
+# all instances from all projects unfiltered communication. With VLAN
+# networking, this allows access between instances within the same project.
+#
+# This option only applies when using the ``nova-network`` service. When using
+# another networking services, such as Neutron, security groups or other
+# approaches should be used.
+#
+# Possible values:
+#
+# * True: Network traffic should be allowed pass between all instances on the
+#   same network, regardless of their tenant and security policies
+# * False: Network traffic should not be allowed pass between instances unless
+#   it is unblocked in a security group
+#
+# Related options:
+#
+# * ``use_neutron``: This must be set to ``False`` to enable ``nova-network``
+#   networking
+# * ``firewall_driver``: This must be set to
+#   ``nova.virt.libvirt.firewall.IptablesFirewallDriver`` to ensure the
+#   libvirt firewall driver is enabled.
+#  (boolean value)
+#allow_same_net_traffic=true
+
+#
+# Filename that will be used for storing websocket frames received
+# and sent by a proxy service (like VNC, spice, serial) running on this host.
+# If this is not set, no recording will be done.
+#  (string value)
+#record=<None>
+
+# Run as a background process. (boolean value)
+#daemon=false
+
+# Disallow non-encrypted connections. (boolean value)
+#ssl_only=false
+
+# Set to True if source host is addressed with IPv6. (boolean value)
+#source_is_ipv6=false
+
+# Path to SSL certificate file. (string value)
+#cert=self.pem
+
+# SSL key file (if separate from cert). (string value)
+#key=<None>
+
+#
+# Path to directory with content which will be served by a web server.
+#  (string value)
+#web=/usr/share/spice-html5
+
+#
+# The directory where the Nova python modules are installed.
+#
+# This directory is used to store template files for networking and remote
+# console access. It is also the default path for other config options which
+# need to persist Nova internal data. It is very unlikely that you need to
+# change this option from its default value.
+#
+# Possible values:
+#
+# * The full path to a directory.
+#
+# Related options:
+#
+# * ``state_path``
+#  (string value)
+#pybasedir=/build/nova-elxmSs/nova-15.0.2
+
+#
+# The directory where the Nova binaries are installed.
+#
+# This option is only relevant if the networking capabilities from Nova are
+# used (see services below). Nova's networking capabilities are targeted to
+# be fully replaced by Neutron in the future. It is very unlikely that you need
+# to change this option from its default value.
+#
+# Possible values:
+#
+# * The full path to a directory.
+#  (string value)
+#bindir=/usr/local/bin
+
+#
+# The top-level directory for maintaining Nova's state.
+#
+# This directory is used to store Nova's internal state. It is used by a
+# variety of other config options which derive from this. In some scenarios
+# (for example migrations) it makes sense to use a storage location which is
+# shared between multiple compute hosts (for example via NFS). Unless the
+# option ``instances_path`` gets overwritten, this directory can grow very
+# large.
+#
+# Possible values:
+#
+# * The full path to a directory. Defaults to value provided in ``pybasedir``.
+#  (string value)
+state_path=/var/lib/nova
+
+#
+# Number of seconds indicating how frequently the state of services on a
+# given hypervisor is reported. Nova needs to know this to determine the
+# overall health of the deployment.
+#
+# Related Options:
+#
+# * service_down_time
+#   report_interval should be less than service_down_time. If service_down_time
+#   is less than report_interval, services will routinely be considered down,
+#   because they report in too rarely.
+#  (integer value)
+#report_interval=10
+report_interval = 60
+
+#
+# Maximum time in seconds since last check-in for up service
+#
+# Each compute node periodically updates their database status based on the
+# specified report interval. If the compute node hasn't updated the status
+# for more than service_down_time, then the compute node is considered down.
+#
+# Related Options:
+#
+# * report_interval (service_down_time should not be less than report_interval)
+#  (integer value)
+#service_down_time=60
+service_down_time=90
+
+#
+# Enable periodic tasks.
+#
+# If set to true, this option allows services to periodically run tasks
+# on the manager.
+#
+# In case of running multiple schedulers or conductors you may want to run
+# periodic tasks on only one host - in this case disable this option for all
+# hosts but one.
+#  (boolean value)
+#periodic_enable=true
+
+#
+# Number of seconds to randomly delay when starting the periodic task
+# scheduler to reduce stampeding.
+#
+# When compute workers are restarted in unison across a cluster,
+# they all end up running the periodic tasks at the same time
+# causing problems for the external services. To mitigate this
+# behavior, periodic_fuzzy_delay option allows you to introduce a
+# random initial delay when starting the periodic task scheduler.
+#
+# Possible Values:
+#
+# * Any positive integer (in seconds)
+# * 0 : disable the random delay
+#  (integer value)
+# Minimum value: 0
+#periodic_fuzzy_delay=60
+
+# List of APIs to be enabled by default. (list value)
+enabled_apis=osapi_compute,metadata
+
+#
+# List of APIs with enabled SSL.
+#
+# Nova provides SSL support for the API servers. enabled_ssl_apis option
+# allows configuring the SSL support.
+#  (list value)
+#enabled_ssl_apis =
+
+#
+# IP address on which the OpenStack API will listen.
+#
+# The OpenStack API service listens on this IP address for incoming
+# requests.
+#  (string value)
+#osapi_compute_listen=0.0.0.0
+
+#
+# Port on which the OpenStack API will listen.
+#
+# The OpenStack API service listens on this port number for incoming
+# requests.
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#osapi_compute_listen_port=8774
+
+#
+# Number of workers for OpenStack API service. The default will be the number
+# of CPUs available.
+#
+# OpenStack API services can be configured to run as multi-process (workers).
+# This overcomes the problem of reduction in throughput when API request
+# concurrency increases. OpenStack API service will run in the specified
+# number of processes.
+#
+# Possible Values:
+#
+# * Any positive integer
+# * None (default value)
+#  (integer value)
+# Minimum value: 1
+#osapi_compute_workers=<None>
+
+#
+# IP address on which the metadata API will listen.
+#
+# The metadata API service listens on this IP address for incoming
+# requests.
+#  (string value)
+#metadata_listen=0.0.0.0
+
+#
+# Port on which the metadata API will listen.
+#
+# The metadata API service listens on this port number for incoming
+# requests.
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#metadata_listen_port=8775
+
+#
+# Number of workers for metadata service. If not specified the number of
+# available CPUs will be used.
+#
+# The metadata service can be configured to run as multi-process (workers).
+# This overcomes the problem of reduction in throughput when API request
+# concurrency increases. The metadata service will run in the specified
+# number of processes.
+#
+# Possible Values:
+#
+# * Any positive integer
+# * None (default value)
+#  (integer value)
+# Minimum value: 1
+#metadata_workers=<None>
+
+# Full class name for the Manager for network (string value)
+# Allowed values: nova.network.manager.FlatManager, nova.network.manager.FlatDHCPManager, nova.network.manager.VlanManager
+#network_manager=nova.network.manager.VlanManager
+
+#
+# This option specifies the driver to be used for the servicegroup service.
+#
+# ServiceGroup API in nova enables checking status of a compute node. When a
+# compute worker running the nova-compute daemon starts, it calls the join API
+# to join the compute group. Services like nova scheduler can query the
+# ServiceGroup API to check if a node is alive. Internally, the ServiceGroup
+# client driver automatically updates the compute worker status. There are
+# multiple backend implementations for this service: Database ServiceGroup
+# driver
+# and Memcache ServiceGroup driver.
+#
+# Possible Values:
+#
+#     * db : Database ServiceGroup driver
+#     * mc : Memcache ServiceGroup driver
+#
+# Related Options:
+#
+#     * service_down_time (maximum time since last check-in for up service)
+#  (string value)
+# Allowed values: db, mc
+#servicegroup_driver=db
 
 #
 # From oslo.log
@@ -7,7 +2771,15 @@
 # If set to true, the logging level will be set to DEBUG instead of the default
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
-#debug = false
+#debug=false
+debug=false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose=true
+verbose=true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -17,131 +2789,132 @@
 # example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
+#log_config_append=<None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
 # %(default)s . This option is ignored if log_config_append is set. (string
 # value)
-#log_date_format = %Y-%m-%d %H:%M:%S
+#log_date_format=%Y-%m-%d %H:%M:%S
 
 # (Optional) Name of log file to send logging output to. If no default is set,
 # logging will go to stderr as defined by use_stderr. This option is ignored if
 # log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
+#log_file=<None>
 
 # (Optional) The base directory used for relative log_file  paths. This option
 # is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
+log_dir=/var/log/nova
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
 # instantaneously. It makes sense only if log_file option is specified and Linux
 # platform is used. This option is ignored if log_config_append is set. (boolean
 # value)
-#watch_log_file = false
+#watch_log_file=false
 
 # Use syslog for logging. Existing syslog format is DEPRECATED and will be
 # changed later to honor RFC5424. This option is ignored if log_config_append is
 # set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
+#use_syslog=false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
+#syslog_log_facility=LOG_USER
 
 # Log output to standard error. This option is ignored if log_config_append is
 # set. (boolean value)
-#use_stderr = false
+#use_stderr=false
 
 # Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+#logging_context_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
 # Format string to use for log messages when context is undefined. (string
 # value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+#logging_default_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
 # Additional data to append to log message when logging level for the message is
 # DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+#logging_debug_format_suffix=%(funcName)s %(pathname)s:%(lineno)d
 
 # Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+#logging_exception_prefix=%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+#logging_user_identity_format=%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels=amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
-#publish_errors = false
+#publish_errors=false
 
 # The format for an instance that is passed with the log message. (string value)
-#instance_format = "[instance: %(uuid)s] "
+#instance_format="[instance: %(uuid)s] "
 
 # The format for an instance UUID that is passed with the log message. (string
 # value)
-#instance_uuid_format = "[instance: %(uuid)s] "
+#instance_uuid_format="[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
+#rate_limit_interval=0
 
 # Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
+#rate_limit_burst=0
 
 # Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
 # empty string. Logs with level greater or equal to rate_limit_except_level are
 # not filtered. An empty string means that all levels are filtered. (string
 # value)
-#rate_limit_except_level = CRITICAL
+#rate_limit_except_level=CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
+#fatal_deprecations=false
 
 #
 # From oslo.messaging
 #
 
 # Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size=30
 
 # The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
+#conn_pool_min_size=2
 
 # The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
+#conn_pool_ttl=1200
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address=*
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker=redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts=1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog=<None>
 
 # Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir=/var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host=localhost
 
 # Number of seconds to wait before all pending messages will be sent after
 # closing a socket. The default value of -1 specifies an infinite linger period.
@@ -149,138 +2922,146 @@
 # immediately when the socket is closed. Positive values specify an upper bound
 # for the linger period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
+#zmq_linger=-1
+zmq_linger=30
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout=1
 
 # Expiration timeout in seconds of a name service record about existing target (
 # < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire=300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
-#zmq_target_update = 180
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update=180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
-#use_pub_sub = false
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub=false
 
 # Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy=false
 
 # This option makes direct connections dynamic or static. It makes sense only
 # with use_router_proxy=False which means to use direct connections for direct
 # message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
+#use_dynamic_connections=false
 
 # How many additional connections to a host will be made for failover reasons.
 # This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
+#zmq_failover_connections=2
 
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#rpc_zmq_min_port = 49153
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port=49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
-#rpc_zmq_max_port = 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port=65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
-#rpc_zmq_bind_port_retries = 100
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries=100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
-#rpc_zmq_serialization = json
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization=json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
 # a queue when server side disconnects. False means to keep queue and messages
 # even if server is disconnected, when the server appears we send all
 # accumulated messages to it. (boolean value)
-#zmq_immediate = true
+#zmq_immediate=true
 
 # Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
 # other negative value) means to skip any overrides and leave it to OS default;
 # 0 and 1 (or any other positive value) mean to disable and enable the option
 # respectively. (integer value)
-#zmq_tcp_keepalive = -1
+#zmq_tcp_keepalive=-1
 
 # The duration between two keepalive transmissions in idle condition. The unit
 # is platform dependent, for example, seconds in Linux, milliseconds in Windows
 # etc. The default value of -1 (or any other negative value and 0) means to skip
 # any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
+#zmq_tcp_keepalive_idle=-1
 
 # The number of retransmissions to be carried out before declaring that remote
 # end is not available. The default value of -1 (or any other negative value and
 # 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
+#zmq_tcp_keepalive_cnt=-1
 
 # The duration between two successive keepalive retransmissions, if
 # acknowledgement to the previous keepalive transmission is not received. The
 # unit is platform dependent, for example, seconds in Linux, milliseconds in
 # Windows etc. The default value of -1 (or any other negative value and 0) means
 # to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
+#zmq_tcp_keepalive_intvl=-1
 
 # Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
+#rpc_thread_pool_size=100
 
 # Expiration timeout in seconds of a sent/received message after which it is not
 # tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
+#rpc_message_ttl=300
 
 # Wait for message acknowledgements from receivers. This mechanism works only
 # via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
+#rpc_use_acks=false
 
 # Number of seconds to wait for an ack from a cast/call. After each retry
 # attempt this timeout is multiplied by some specified multiplier. (integer
 # value)
-#rpc_ack_timeout_base = 15
+#rpc_ack_timeout_base=15
 
 # Number to multiply base ack timeout by after each retry attempt. (integer
 # value)
-#rpc_ack_timeout_multiplier = 2
+#rpc_ack_timeout_multiplier=2
 
 # Default number of message sending attempts in case of any problems occurred:
 # positive value N means at most N retries, 0 means no retries, None or -1 (or
 # any other negative values) mean to retry forever. This option is used only if
 # acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
+#rpc_retry_attempts=3
 
 # List of publisher hosts SubConsumer can subscribe on. This option has higher
 # priority then the default publishers list taken from the matchmaker. (list
 # value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
+#executor_thread_pool_size=64
+executor_thread_pool_size=70
 
 # Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# A URL representing the messaging driver to use and its full configuration.
-# (string value)
-#transport_url = <None>
+#rpc_response_timeout=60
+rpc_response_timeout = 30
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
+#rpc_backend=rabbit
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
+#control_exchange=openstack
 
 #
 # From oslo.service.periodic_task
@@ -288,7 +3069,7 @@
 
 # Some periodic tasks can be run in a separate process. Should we run them here?
 # (boolean value)
-#run_external_periodic_tasks = true
+#run_external_periodic_tasks=true
 
 #
 # From oslo.service.service
@@ -300,21 +3081,1188 @@
 # is in use); and <start>:<end> results in listening on the smallest unused port
 # number within the specified range of port numbers.  The chosen port is
 # displayed in the service's log file. (string value)
-#backdoor_port = <None>
+#backdoor_port=<None>
 
 # Enable eventlet backdoor, using the provided path as a unix socket that can
 # receive connections. This option is mutually exclusive with 'backdoor_port' in
 # that only one should be provided. If both are provided then the existence of
 # this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
+#backdoor_socket=<None>
 
 # Enables or disables logging values of all registered options when starting a
 # service (at DEBUG level). (boolean value)
-#log_options = true
+#log_options=true
 
 # Specify a timeout after which a gracefully shutdown server will exit. Zero
 # value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
+#graceful_shutdown_timeout=60
+
+
+[api]
+#
+# Options under this group are used to define Nova API.
+
+#
+# From nova.conf
+#
+
+#
+# This determines the strategy to use for authentication: keystone or noauth2.
+# 'noauth2' is designed for testing only, as it does no actual credential
+# checking. 'noauth2' provides administrative credentials only if 'admin' is
+# specified as the username.
+#  (string value)
+# Allowed values: keystone, noauth2
+# Deprecated group/name - [DEFAULT]/auth_strategy
+#auth_strategy=keystone
+auth_strategy=keystone
+
+#
+# When True, the 'X-Forwarded-For' header is treated as the canonical remote
+# address. When False (the default), the 'remote_address' header is used.
+#
+# You should only enable this if you have an HTML sanitizing proxy.
+#  (boolean value)
+# Deprecated group/name - [DEFAULT]/use_forwarded_for
+#use_forwarded_for=false
+
+#
+# When gathering the existing metadata for a config drive, the EC2-style
+# metadata is returned for all versions that don't appear in this option.
+# As of the Liberty release, the available versions are:
+#
+# * 1.0
+# * 2007-01-19
+# * 2007-03-01
+# * 2007-08-29
+# * 2007-10-10
+# * 2007-12-15
+# * 2008-02-01
+# * 2008-09-01
+# * 2009-04-04
+#
+# The option is in the format of a single string, with each version separated
+# by a space.
+#
+# Possible values:
+#
+# * Any string that represents zero or more versions, separated by spaces.
+#  (string value)
+# Deprecated group/name - [DEFAULT]/config_drive_skip_versions
+#config_drive_skip_versions=1.0 2007-01-19 2007-03-01 2007-08-29 2007-10-10 2007-12-15 2008-02-01 2008-09-01
+
+#
+# A list of vendordata providers.
+#
+# vendordata providers are how deployers can provide metadata via configdrive
+# and metadata that is specific to their deployment. There are currently two
+# supported providers: StaticJSON and DynamicJSON.
+#
+# StaticJSON reads a JSON file configured by the flag vendordata_jsonfile_path
+# and places the JSON from that file into vendor_data.json and
+# vendor_data2.json.
+#
+# DynamicJSON is configured via the vendordata_dynamic_targets flag, which is
+# documented separately. For each of the endpoints specified in that flag, a
+# section is added to the vendor_data2.json.
+#
+# For more information on the requirements for implementing a vendordata
+# dynamic endpoint, please see the vendordata.rst file in the nova developer
+# reference.
+#
+# Possible values:
+#
+# * A list of vendordata providers, with StaticJSON and DynamicJSON being
+#   current options.
+#
+# Related options:
+#
+# * vendordata_dynamic_targets
+# * vendordata_dynamic_ssl_certfile
+# * vendordata_dynamic_connect_timeout
+# * vendordata_dynamic_read_timeout
+# * vendordata_dynamic_failure_fatal
+#  (list value)
+# Deprecated group/name - [DEFAULT]/vendordata_providers
+#vendordata_providers =
+
+#
+# A list of targets for the dynamic vendordata provider. These targets are of
+# the form <name>@<url>.
+#
+# The dynamic vendordata provider collects metadata by contacting external REST
+# services and querying them for information about the instance. This behaviour
+# is documented in the vendordata.rst file in the nova developer reference.
+#  (list value)
+# Deprecated group/name - [DEFAULT]/vendordata_dynamic_targets
+#vendordata_dynamic_targets =
+
+#
+# Path to an optional certificate file or CA bundle to verify dynamic
+# vendordata REST services ssl certificates against.
+#
+# Possible values:
+#
+# * An empty string, or a path to a valid certificate file
+#
+# Related options:
+#
+# * vendordata_providers
+# * vendordata_dynamic_targets
+# * vendordata_dynamic_connect_timeout
+# * vendordata_dynamic_read_timeout
+# * vendordata_dynamic_failure_fatal
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vendordata_dynamic_ssl_certfile
+#vendordata_dynamic_ssl_certfile =
+
+#
+# Maximum wait time for an external REST service to connect.
+#
+# Possible values:
+#
+# * Any integer with a value greater than three (the TCP packet retransmission
+#   timeout). Note that instance start may be blocked during this wait time,
+#   so this value should be kept small.
+#
+# Related options:
+#
+# * vendordata_providers
+# * vendordata_dynamic_targets
+# * vendordata_dynamic_ssl_certfile
+# * vendordata_dynamic_read_timeout
+# * vendordata_dynamic_failure_fatal
+#  (integer value)
+# Minimum value: 3
+# Deprecated group/name - [DEFAULT]/vendordata_dynamic_connect_timeout
+#vendordata_dynamic_connect_timeout=5
+
+#
+# Maximum wait time for an external REST service to return data once connected.
+#
+# Possible values:
+#
+# * Any integer. Note that instance start is blocked during this wait time,
+#   so this value should be kept small.
+#
+# Related options:
+#
+# * vendordata_providers
+# * vendordata_dynamic_targets
+# * vendordata_dynamic_ssl_certfile
+# * vendordata_dynamic_connect_timeout
+# * vendordata_dynamic_failure_fatal
+#  (integer value)
+# Minimum value: 0
+# Deprecated group/name - [DEFAULT]/vendordata_dynamic_read_timeout
+#vendordata_dynamic_read_timeout=5
+
+#
+# Should failures to fetch dynamic vendordata be fatal to instance boot?
+#
+# Related options:
+#
+# * vendordata_providers
+# * vendordata_dynamic_targets
+# * vendordata_dynamic_ssl_certfile
+# * vendordata_dynamic_connect_timeout
+# * vendordata_dynamic_read_timeout
+#  (boolean value)
+#vendordata_dynamic_failure_fatal=false
+
+#
+# This option is the time (in seconds) to cache metadata. When set to 0,
+# metadata caching is disabled entirely; this is generally not recommended for
+# performance reasons. Increasing this setting should improve response times
+# of the metadata API when under heavy load. Higher values may increase memory
+# usage, and result in longer times for host metadata changes to take effect.
+#  (integer value)
+# Minimum value: 0
+# Deprecated group/name - [DEFAULT]/metadata_cache_expiration
+#metadata_cache_expiration=15
+
+#
+# Cloud providers may store custom data in vendor data file that will then be
+# available to the instances via the metadata service, and to the rendering of
+# config-drive. The default class for this, JsonFileVendorData, loads this
+# information from a JSON file, whose path is configured by this option. If
+# there is no path set by this option, the class returns an empty dictionary.
+#
+# Possible values:
+#
+# * Any string representing the path to the data file, or an empty string
+#     (default).
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vendordata_jsonfile_path
+#vendordata_jsonfile_path=<None>
+
+#
+# As a query can potentially return many thousands of items, you can limit the
+# maximum number of items in a single response by setting this option.
+#  (integer value)
+# Minimum value: 0
+# Deprecated group/name - [DEFAULT]/osapi_max_limit
+#max_limit=1000
+
+#
+# This string is prepended to the normal URL that is returned in links to the
+# OpenStack Compute API. If it is empty (the default), the URLs are returned
+# unchanged.
+#
+# Possible values:
+#
+# * Any string, including an empty string (the default).
+#  (string value)
+# Deprecated group/name - [DEFAULT]/osapi_compute_link_prefix
+#compute_link_prefix=<None>
+
+#
+# This string is prepended to the normal URL that is returned in links to
+# Glance resources. If it is empty (the default), the URLs are returned
+# unchanged.
+#
+# Possible values:
+#
+# * Any string, including an empty string (the default).
+#  (string value)
+# Deprecated group/name - [DEFAULT]/osapi_glance_link_prefix
+#glance_link_prefix=<None>
+
+#
+# Operators can turn off the ability for a user to take snapshots of their
+# instances by setting this option to False. When disabled, any attempt to
+# take a snapshot will result in a HTTP 400 response ("Bad Request").
+#  (boolean value)
+# Deprecated group/name - [DEFAULT]/allow_instance_snapshots
+#allow_instance_snapshots=true
+
+#
+# This option is a list of all instance states for which network address
+# information should not be returned from the API.
+#
+# Possible values:
+#
+#   A list of strings, where each string is a valid VM state, as defined in
+#   nova/compute/vm_states.py. As of the Newton release, they are:
+#
+# * "active"
+# * "building"
+# * "paused"
+# * "suspended"
+# * "stopped"
+# * "rescued"
+# * "resized"
+# * "soft-delete"
+# * "deleted"
+# * "error"
+# * "shelved"
+# * "shelved_offloaded"
+#  (list value)
+# Deprecated group/name - [DEFAULT]/osapi_hide_server_address_states
+#hide_server_address_states=building
+
+# The full path to the fping binary. (string value)
+# Deprecated group/name - [DEFAULT]/fping_path
+#fping_path=/usr/sbin/fping
+
+#
+# When True, the TenantNetworkController will query the Neutron API to get the
+# default networks to use.
+#
+# Related options:
+#
+# * neutron_default_tenant_id
+#  (boolean value)
+# Deprecated group/name - [DEFAULT]/use_neutron_default_nets
+#use_neutron_default_nets=false
+
+#
+# Tenant ID for getting the default network from Neutron API (also referred in
+# some places as the 'project ID') to use.
+#
+# Related options:
+#
+# * use_neutron_default_nets
+#  (string value)
+# Deprecated group/name - [DEFAULT]/neutron_default_tenant_id
+#neutron_default_tenant_id=default
+
+#
+# Enables returning of the instance password by the relevant server API calls
+# such as create, rebuild, evacuate, or rescue. If the hypervisor does not
+# support password injection, then the password returned will not be correct,
+# so if your hypervisor does not support password injection, set this to False.
+#  (boolean value)
+# Deprecated group/name - [DEFAULT]/enable_instance_password
+#enable_instance_password=true
+
+
+[api_database]
+#
+# The *Nova API Database* is a separate database which is used for information
+# which is used across *cells*. This database is mandatory since the Mitaka
+# release (13.0.0).
+
+#
+# From nova.conf
+#
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+connection=sqlite:////var/lib/nova/nova.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous=true
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection=<None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
+# the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode=TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+#idle_timeout=3600
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
+# indicates no limit. (integer value)
+#max_pool_size=<None>
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+#max_retries=10
+
+# Interval between retries of opening a SQL connection. (integer value)
+#retry_interval=10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+#max_overflow=<None>
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+#connection_debug=0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+#connection_trace=false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+#pool_timeout=<None>
+
+[cache]
+
+#
+# From nova.conf
+#
+backend = oslo_cache.memcache_pool
+enabled = true
+memcache_servers=192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix=cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region. This
+# applies to any cached method that doesn't have an explicit cache expiration
+# time defined for it. (integer value)
+#expiration_time=600
+
+# Dogpile.cache backend module. It is recommended that Memcache or Redis
+# (dogpile.cache.redis) be used in production deployments. For eventlet-based or
+# highly threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
+# recommended. For low thread servers, dogpile.cache.memcached is recommended.
+# Test environments with a single instance of the server can use the
+# dogpile.cache.memory backend. (string value)
+#backend=dogpile.cache.null
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled=false
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc calls).
+# This is only really useful if you need to see the specific cache-backend
+# get/set/delete calls with the keys/values.  Typically this should be left set
+# to false. (boolean value)
+#debug_cache_backend=false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers=localhost:11211
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry=300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (integer value)
+#memcache_socket_timeout=3
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize=10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout=60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout=10
+
+
+[cells]
+#
+# Cells options allow you to use cells functionality in openstack
+# deployment.
+#
+# Note that the options in this group are only for cells v1 functionality, which
+# is considered experimental and not recommended for new deployments. Cells v1
+# is being replaced with cells v2, which starting in the 15.0.0 Ocata release is
+# required and all Nova deployments will be at least a cells v2 cell of one.
+#
+
+#
+# From nova.conf
+#
+
+# DEPRECATED:
+# Topic.
+#
+# This is the message queue topic that cells nodes listen on. It is
+# used when the cells service is started up to configure the queue,
+# and whenever an RPC call to the scheduler is made.
+#
+# Possible values:
+#
+# * cells: This is the recommended and the default value.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# Configurable RPC topics provide little value and can result in a wide variety
+# of errors. They should not be used.
+#topic=cells
+
+#
+# Enable cell v1 functionality.
+#
+# Note that cells v1 is considered experimental and not recommended for new
+# Nova deployments. Cells v1 is being replaced by cells v2 which starting in
+# the 15.0.0 Ocata release, all Nova deployments are at least a cells v2 cell
+# of one. Setting this option, or any other options in the [cells] group, is
+# not required for cells v2.
+#
+# When this functionality is enabled, it lets you to scale an OpenStack
+# Compute cloud in a more distributed fashion without having to use
+# complicated technologies like database and message queue clustering.
+# Cells are configured as a tree. The top-level cell should have a host
+# that runs a nova-api service, but no nova-compute services. Each
+# child cell should run all of the typical nova-* services in a regular
+# Compute cloud except for nova-api. You can think of cells as a normal
+# Compute deployment in that each cell has its own database server and
+# message queue broker.
+#
+# Related options:
+#
+# * name: A unique cell name must be given when this functionality
+#   is enabled.
+# * cell_type: Cell type should be defined for all cells.
+#  (boolean value)
+enable=False
+
+#
+# Name of the current cell.
+#
+# This value must be unique for each cell. Name of a cell is used as
+# its id, leaving this option unset or setting the same name for
+# two or more cells may cause unexpected behaviour.
+#
+# Related options:
+#
+# * enabled: This option is meaningful only when cells service
+#   is enabled
+#  (string value)
+#name=nova
+
+#
+# Cell capabilities.
+#
+# List of arbitrary key=value pairs defining capabilities of the
+# current cell to be sent to the parent cells. These capabilities
+# are intended to be used in cells scheduler filters/weighers.
+#
+# Possible values:
+#
+# * key=value pairs list for example;
+#   ``hypervisor=xenserver;kvm,os=linux;windows``
+#  (list value)
+#capabilities=hypervisor=xenserver;kvm,os=linux;windows
+
+#
+# Call timeout.
+#
+# Cell messaging module waits for response(s) to be put into the
+# eventlet queue. This option defines the seconds waited for
+# response from a call to a cell.
+#
+# Possible values:
+#
+# * An integer, corresponding to the interval time in seconds.
+#  (integer value)
+# Minimum value: 0
+#call_timeout=60
+
+#
+# Reserve percentage
+#
+# Percentage of cell capacity to hold in reserve, so the minimum
+# amount of free resource is considered to be;
+#
+#     min_free = total * (reserve_percent / 100.0)
+#
+# This option affects both memory and disk utilization.
+#
+# The primary purpose of this reserve is to ensure some space is
+# available for users who want to resize their instance to be larger.
+# Note that currently once the capacity expands into this reserve
+# space this option is ignored.
+#
+# Possible values:
+#
+# * An integer or float, corresponding to the percentage of cell capacity to
+#   be held in reserve.
+#  (floating point value)
+#reserve_percent=10.0
+
+#
+# Type of cell.
+#
+# When cells feature is enabled the hosts in the OpenStack Compute
+# cloud are partitioned into groups. Cells are configured as a tree.
+# The top-level cell's cell_type must be set to ``api``. All other
+# cells are defined as a ``compute cell`` by default.
+#
+# Related option:
+#
+# * quota_driver: Disable quota checking for the child cells.
+#   (nova.quota.NoopQuotaDriver)
+#  (string value)
+# Allowed values: api, compute
+#cell_type=compute
+
+#
+# Mute child interval.
+#
+# Number of seconds after which a lack of capability and capacity
+# update the child cell is to be treated as a mute cell. Then the
+# child cell will be weighed as recommend highly that it be skipped.
+#
+# Possible values:
+#
+# * An integer, corresponding to the interval time in seconds.
+#  (integer value)
+#mute_child_interval=300
+
+#
+# Bandwidth update interval.
+#
+# Seconds between bandwidth usage cache updates for cells.
+#
+# Possible values:
+#
+# * An integer, corresponding to the interval time in seconds.
+#  (integer value)
+#bandwidth_update_interval=600
+
+#
+# Instance update sync database limit.
+#
+# Number of instances to pull from the database at one time for
+# a sync. If there are more instances to update the results will
+# be paged through.
+#
+# Possible values:
+#
+# * An integer, corresponding to a number of instances.
+#  (integer value)
+#instance_update_sync_database_limit=100
+
+#
+# Mute weight multiplier.
+#
+# Multiplier used to weigh mute children. Mute children cells are
+# recommended to be skipped so their weight is multiplied by this
+# negative value.
+#
+# Possible values:
+#
+# * Negative numeric number
+#  (floating point value)
+#mute_weight_multiplier=-10000.0
+
+#
+# Ram weight multiplier.
+#
+# Multiplier used for weighing ram. Negative numbers indicate that
+# Compute should stack VMs on one host instead of spreading out new
+# VMs to more hosts in the cell.
+#
+# Possible values:
+#
+# * Numeric multiplier
+#  (floating point value)
+#ram_weight_multiplier=10.0
+
+#
+# Offset weight multiplier
+#
+# Multiplier used to weigh offset weigher. Cells with higher
+# weight_offsets in the DB will be preferred. The weight_offset
+# is a property of a cell stored in the database. It can be used
+# by a deployer to have scheduling decisions favor or disfavor
+# cells based on the setting.
+#
+# Possible values:
+#
+# * Numeric multiplier
+#  (floating point value)
+#offset_weight_multiplier=1.0
+
+#
+# Instance updated at threshold
+#
+# Number of seconds after an instance was updated or deleted to
+# continue to update cells. This option lets cells manager to only
+# attempt to sync instances that have been updated recently.
+# i.e., a threshold of 3600 means to only update instances that
+# have modified in the last hour.
+#
+# Possible values:
+#
+# * Threshold in seconds
+#
+# Related options:
+#
+# * This value is used with the ``instance_update_num_instances``
+#   value in a periodic task run.
+#  (integer value)
+#instance_updated_at_threshold=3600
+
+#
+# Instance update num instances
+#
+# On every run of the periodic task, nova cells manager will attempt to
+# sync instance_updated_at_threshold number of instances. When the
+# manager gets the list of instances, it shuffles them so that multiple
+# nova-cells services do not attempt to sync the same instances in
+# lockstep.
+#
+# Possible values:
+#
+# * Positive integer number
+#
+# Related options:
+#
+# * This value is used with the ``instance_updated_at_threshold``
+#   value in a periodic task run.
+#  (integer value)
+#instance_update_num_instances=1
+
+#
+# Maximum hop count
+#
+# When processing a targeted message, if the local cell is not the
+# target, a route is defined between neighbouring cells. And the
+# message is processed across the whole routing path. This option
+# defines the maximum hop counts until reaching the target.
+#
+# Possible values:
+#
+# * Positive integer value
+#  (integer value)
+#max_hop_count=10
+
+#
+# Cells scheduler.
+#
+# The class of the driver used by the cells scheduler. This should be
+# the full Python path to the class to be used. If nothing is specified
+# in this option, the CellsScheduler is used.
+#  (string value)
+#scheduler=nova.cells.scheduler.CellsScheduler
+
+#
+# RPC driver queue base.
+#
+# When sending a message to another cell by JSON-ifying the message
+# and making an RPC cast to 'process_message', a base queue is used.
+# This option defines the base queue name to be used when communicating
+# between cells. Various topics by message type will be appended to this.
+#
+# Possible values:
+#
+# * The base queue name to be used when communicating between cells.
+#  (string value)
+#rpc_driver_queue_base=cells.intercell
+
+#
+# Scheduler filter classes.
+#
+# Filter classes the cells scheduler should use. An entry of
+# "nova.cells.filters.all_filters" maps to all cells filters
+# included with nova. As of the Mitaka release the following
+# filter classes are available:
+#
+# Different cell filter: A scheduler hint of 'different_cell'
+# with a value of a full cell name may be specified to route
+# a build away from a particular cell.
+#
+# Image properties filter: Image metadata named
+# 'hypervisor_version_requires' with a version specification
+# may be specified to ensure the build goes to a cell which
+# has hypervisors of the required version. If either the version
+# requirement on the image or the hypervisor capability of the
+# cell is not present, this filter returns without filtering out
+# the cells.
+#
+# Target cell filter: A scheduler hint of 'target_cell' with a
+# value of a full cell name may be specified to route a build to
+# a particular cell. No error handling is done as there's no way
+# to know whether the full path is a valid.
+#
+# As an admin user, you can also add a filter that directs builds
+# to a particular cell.
+#
+#  (list value)
+#scheduler_filter_classes=nova.cells.filters.all_filters
+
+#
+# Scheduler weight classes.
+#
+# Weigher classes the cells scheduler should use. An entry of
+# "nova.cells.weights.all_weighers" maps to all cell weighers
+# included with nova. As of the Mitaka release the following
+# weight classes are available:
+#
+# mute_child: Downgrades the likelihood of child cells being
+# chosen for scheduling requests, which haven't sent capacity
+# or capability updates in a while. Options include
+# mute_weight_multiplier (multiplier for mute children; value
+# should be negative).
+#
+# ram_by_instance_type: Select cells with the most RAM capacity
+# for the instance type being requested. Because higher weights
+# win, Compute returns the number of available units for the
+# instance type requested. The ram_weight_multiplier option defaults
+# to 10.0 that adds to the weight by a factor of 10. Use a negative
+# number to stack VMs on one host instead of spreading out new VMs
+# to more hosts in the cell.
+#
+# weight_offset: Allows modifying the database to weight a particular
+# cell. The highest weight will be the first cell to be scheduled for
+# launching an instance. When the weight_offset of a cell is set to 0,
+# it is unlikely to be picked but it could be picked if other cells
+# have a lower weight, like if they're full. And when the weight_offset
+# is set to a very high value (for example, '999999999999999'), it is
+# likely to be picked if another cell do not have a higher weight.
+#  (list value)
+#scheduler_weight_classes=nova.cells.weights.all_weighers
+
+#
+# Scheduler retries.
+#
+# How many retries when no cells are available. Specifies how many
+# times the scheduler tries to launch a new instance when no cells
+# are available.
+#
+# Possible values:
+#
+# * Positive integer value
+#
+# Related options:
+#
+# * This value is used with the ``scheduler_retry_delay`` value
+#   while retrying to find a suitable cell.
+#  (integer value)
+#scheduler_retries=10
+
+#
+# Scheduler retry delay.
+#
+# Specifies the delay (in seconds) between scheduling retries when no
+# cell can be found to place the new instance on. When the instance
+# could not be scheduled to a cell after ``scheduler_retries`` in
+# combination with ``scheduler_retry_delay``, then the scheduling
+# of the instance failed.
+#
+# Possible values:
+#
+# * Time in seconds.
+#
+# Related options:
+#
+# * This value is used with the ``scheduler_retries`` value
+#   while retrying to find a suitable cell.
+#  (integer value)
+#scheduler_retry_delay=2
+
+#
+# DB check interval.
+#
+# Cell state manager updates cell status for all cells from the DB
+# only after this particular interval time is passed. Otherwise cached
+# status are used. If this value is 0 or negative all cell status are
+# updated from the DB whenever a state is needed.
+#
+# Possible values:
+#
+# * Interval time, in seconds.
+#
+#  (integer value)
+#db_check_interval=60
+
+#
+# Optional cells configuration.
+#
+# Configuration file from which to read cells configuration. If given,
+# overrides reading cells from the database.
+#
+# Cells store all inter-cell communication data, including user names
+# and passwords, in the database. Because the cells data is not updated
+# very frequently, use this option to specify a JSON file to store
+# cells data. With this configuration, the database is no longer
+# consulted when reloading the cells data. The file must have columns
+# present in the Cell model (excluding common database fields and the
+# id column). You must specify the queue connection information through
+# a transport_url field, instead of username, password, and so on.
+#
+# The transport_url has the following form:
+# rabbit://USERNAME:PASSWORD@HOSTNAME:PORT/VIRTUAL_HOST
+#
+# Possible values:
+#
+# The scheme can be either qpid or rabbit, the following sample shows
+# this optional configuration:
+#
+#     {
+#         "parent": {
+#             "name": "parent",
+#             "api_url": "http://api.example.com:8774",
+#             "transport_url": "rabbit://rabbit.example.com",
+#             "weight_offset": 0.0,
+#             "weight_scale": 1.0,
+#             "is_parent": true
+#         },
+#         "cell1": {
+#             "name": "cell1",
+#             "api_url": "http://api.example.com:8774",
+#             "transport_url": "rabbit://rabbit1.example.com",
+#             "weight_offset": 0.0,
+#             "weight_scale": 1.0,
+#             "is_parent": false
+#         },
+#         "cell2": {
+#             "name": "cell2",
+#             "api_url": "http://api.example.com:8774",
+#             "transport_url": "rabbit://rabbit2.example.com",
+#             "weight_offset": 0.0,
+#             "weight_scale": 1.0,
+#             "is_parent": false
+#         }
+#     }
+#
+#  (string value)
+#cells_config=<None>
+
+
+[cinder]
+
+#
+# From nova.conf
+#
+os_region_name = RegionOne
+catalog_info=volumev2:cinderv2:internalURL
+#
+# Info to match when looking for cinder in the service catalog.
+#
+# Possible values:
+#
+# * Format is separated values of the form:
+#   <service_type>:<service_name>:<endpoint_type>
+#
+# Note: Nova does not support the Cinder v1 API since the Nova 15.0.0 Ocata
+# release.
+#
+# Related options:
+#
+# * endpoint_template - Setting this option will override catalog_info
+#  (string value)
+#catalog_info=volumev2:cinderv2:publicURL
+
+#
+# If this option is set then it will override service catalog lookup with
+# this template for cinder endpoint
+#
+# Possible values:
+#
+# * URL for cinder endpoint API
+#   e.g. http://localhost:8776/v2/%(project_id)s
+#
+# Note: Nova does not support the Cinder v1 API since the Nova 15.0.0 Ocata
+# release.
+#
+# Related options:
+#
+# * catalog_info - If endpoint_template is not set, catalog_info will be used.
+#  (string value)
+#endpoint_template=<None>
+
+#
+# Region name of this node. This is used when picking the URL in the service
+# catalog.
+#
+# Possible values:
+#
+# * Any string representing region name
+#  (string value)
+#os_region_name=<None>
+
+#
+# Number of times cinderclient should retry on any failed http call.
+# 0 means connection is attempted only once. Setting it to any positive integer
+# means that on failure connection is retried that many times e.g. setting it
+# to 3 means total attempts to connect will be 4.
+#
+# Possible values:
+#
+# * Any integer value. 0 means connection is attempted only once
+#  (integer value)
+# Minimum value: 0
+#http_retries=3
+
+#
+# Allow attach between instance and volume in different availability zones.
+#
+# If False, volumes attached to an instance must be in the same availability
+# zone in Cinder as the instance availability zone in Nova.
+# This also means care should be taken when booting an instance from a volume
+# where source is not "volume" because Nova will attempt to create a volume
+# using
+# the same availability zone as what is assigned to the instance.
+# If that AZ is not in Cinder (or allow_availability_zone_fallback=False in
+# cinder.conf), the volume create request will fail and the instance will fail
+# the build request.
+# By default there is no availability zone restriction on volume attach.
+#  (boolean value)
+#cross_az_attach=true
+
+
+[cloudpipe]
+
+#
+# From nova.conf
+#
+
+#
+# Image ID used when starting up a cloudpipe VPN client.
+#
+# An empty instance is created and configured with OpenVPN using
+# boot_script_template. This instance would be snapshotted and stored
+# in glance. ID of the stored image is used in 'vpn_image_id' to
+# create cloudpipe VPN client.
+#
+# Possible values:
+#
+# * Any valid ID of a VPN image
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vpn_image_id
+#vpn_image_id=0
+
+#
+# Flavor for VPN instances.
+#
+# Possible values:
+#
+# * Any valid flavor name
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vpn_flavor
+#vpn_flavor=m1.tiny
+
+#
+# Template for cloudpipe instance boot script.
+#
+# Possible values:
+#
+# * Any valid path to a cloudpipe instance boot script template
+#
+# Related options:
+#
+# The following options are required to configure cloudpipe-managed
+# OpenVPN server.
+#
+# * dmz_net
+# * dmz_mask
+# * cnt_vpn_clients
+#  (string value)
+# Deprecated group/name - [DEFAULT]/boot_script_template
+#boot_script_template=$pybasedir/nova/cloudpipe/bootscript.template
+
+#
+# Network to push into OpenVPN config.
+#
+# Note: Above mentioned OpenVPN config can be found at
+# /etc/openvpn/server.conf.
+#
+# Possible values:
+#
+# * Any valid IPv4/IPV6 address
+#
+# Related options:
+#
+# * boot_script_template - dmz_net is pushed into bootscript.template
+#   to configure cloudpipe-managed OpenVPN server
+#  (IP address value)
+# Deprecated group/name - [DEFAULT]/dmz_net
+#dmz_net=10.0.0.0
+
+#
+# Netmask to push into OpenVPN config.
+#
+# Possible values:
+#
+# * Any valid IPv4/IPV6 netmask
+#
+# Related options:
+#
+# * dmz_net - dmz_net and dmz_mask is pushed into bootscript.template
+#   to configure cloudpipe-managed OpenVPN server
+# * boot_script_template
+#  (IP address value)
+# Deprecated group/name - [DEFAULT]/dmz_mask
+#dmz_mask=255.255.255.0
+
+#
+# Suffix to add to project name for VPN key and secgroups
+#
+# Possible values:
+#
+# * Any string value representing the VPN key suffix
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vpn_key_suffix
+#vpn_key_suffix=-vpn
+
+
+[compute]
+
+#
+# From nova.conf
+#
+
+#
+# Number of consecutive failed builds that result in disabling a compute
+# service.
+#
+# This option will cause nova-compute to set itself to a disabled state
+# if a certain number of consecutive build failures occur. This will
+# prevent the scheduler from continuing to send builds to a compute node that is
+# consistently failing. Note that all failures qualify and count towards this
+# score, including reschedules that may have been due to racy scheduler
+# behavior.
+# Since the failures must be consecutive, it is unlikely that occasional
+# expected
+# reschedules will actually disable a compute node.
+#
+# Possible values:
+#
+# * Any positive integer representing a build failure count.
+# * Zero to never auto-disable.
+#  (integer value)
+#consecutive_build_service_disable_threshold = 10
+
+
+[conductor]
+#
+# Options under this group are used to define Conductor's communication,
+# which manager should be act as a proxy between computes and database,
+# and finally, how many worker processes will be used.
+
+#
+# From nova.conf
+#
+
+# DEPRECATED:
+# Topic exchange name on which conductor nodes listen.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# There is no need to let users choose the RPC topic for all services - there
+# is little gain from this. Furthermore, it makes it really easy to break Nova
+# by using this option.
+#topic=conductor
+
+#
+# Number of workers for OpenStack Conductor service. The default will be the
+# number of CPUs available.
+#  (integer value)
+#workers=<None>
+
+
+[console]
+#
+# Options under this group allow to tune the configuration of the console proxy
+# service.
+#
+# Note: in configuration of every compute is a ``console_host`` option,
+# which allows to select the console proxy service to connect to.
+
+#
+# From nova.conf
+#
+
+#
+# Adds list of allowed origins to the console websocket proxy to allow
+# connections from other origin hostnames.
+# Websocket proxy matches the host header with the origin header to
+# prevent cross-site requests. This list specifies if any there are
+# values other than host are allowed in the origin header.
+#
+# Possible values:
+#
+# * A list where each element is an allowed origin hostnames, else an empty list
+#  (list value)
+# Deprecated group/name - [DEFAULT]/console_allowed_origins
+#allowed_origins =
+
+
+[consoleauth]
+
+#
+# From nova.conf
+#
+
+#
+# The lifetime of a console auth token.
+#
+# A console auth token is used in authorizing console access for a user.
+# Once the auth token time to live count has elapsed, the token is
+# considered expired.  Expired tokens are then deleted.
+#  (integer value)
+# Minimum value: 0
+# Deprecated group/name - [DEFAULT]/console_token_ttl
+#token_ttl=600
 
 
 [cors]
@@ -326,24 +4274,135 @@
 # Indicate whether this resource may be shared with the domain received in the
 # requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
 # slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
+#allowed_origin=<None>
 
 # Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
+#allow_credentials=true
 
 # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
 # Headers. (list value)
-#expose_headers =
+#expose_headers=X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Service-Token
 
 # Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
+#max_age=3600
 
 # Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
+#allow_methods=GET,PUT,POST,DELETE,PATCH
 
 # Indicate which header field names may be used during the actual request. (list
 # value)
-#allow_headers =
+#allow_headers=X-Auth-Token,X-Openstack-Request-Id,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id
+
+
+[cors.subdomain]
+
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin=<None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials=true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers=X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Service-Token
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age=3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods=GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request. (list
+# value)
+#allow_headers=X-Auth-Token,X-Openstack-Request-Id,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id
+
+
+[crypto]
+
+#
+# From nova.conf
+#
+
+#
+# Filename of root CA (Certificate Authority). This is a container format
+# and includes root certificates.
+#
+# Possible values:
+#
+# * Any file name containing root CA, cacert.pem is default
+#
+# Related options:
+#
+# * ca_path
+#  (string value)
+# Deprecated group/name - [DEFAULT]/ca_file
+#ca_file=cacert.pem
+
+#
+# Filename of a private key.
+#
+# Related options:
+#
+# * keys_path
+#  (string value)
+# Deprecated group/name - [DEFAULT]/key_file
+#key_file=private/cakey.pem
+
+#
+# Filename of root Certificate Revocation List (CRL). This is a list of
+# certificates that have been revoked, and therefore, entities presenting
+# those (revoked) certificates should no longer be trusted.
+#
+# Related options:
+#
+# * ca_path
+#  (string value)
+# Deprecated group/name - [DEFAULT]/crl_file
+#crl_file=crl.pem
+
+#
+# Directory path where keys are located.
+#
+# Related options:
+#
+# * key_file
+#  (string value)
+# Deprecated group/name - [DEFAULT]/keys_path
+#keys_path=$state_path/keys
+
+#
+# Directory path where root CA is located.
+#
+# Related options:
+#
+# * ca_file
+#  (string value)
+# Deprecated group/name - [DEFAULT]/ca_path
+#ca_path=$state_path/CA
+
+# Option to enable/disable use of CA for each project. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_project_ca
+#use_project_ca=false
+
+#
+# Subject for certificate for users, %s for
+# project, user, timestamp
+#  (string value)
+# Deprecated group/name - [DEFAULT]/user_cert_subject
+#user_cert_subject=/C=US/ST=California/O=OpenStack/OU=NovaDev/CN=%.16s-%.16s-%s
+
+#
+# Subject for certificate for projects, %s for
+# project, timestamp
+#  (string value)
+# Deprecated group/name - [DEFAULT]/project_cert_subject
+#project_cert_subject=/C=US/ST=California/O=OpenStack/OU=NovaDev/CN=project-ca-%.16s-%s
 
 
 [database]
@@ -352,100 +4411,105 @@
 # From oslo.db
 #
 
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect the
+# database.
+#sqlite_db=oslo.sqlite
+
 # If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous=true
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
+#backend=sqlalchemy
 
 # The SQLAlchemy connection string to use to connect to the database. (string
 # value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-#connection = <None>
+#connection=<None>
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
-#slave_connection = <None>
+#slave_connection=<None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
 # default, overrides any server-set SQL mode. To use whatever SQL mode is set by
 # the server configuration, set this to no value. Example: mysql_sql_mode=
 # (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
+#mysql_sql_mode=TRADITIONAL
 
 # Timeout before idle SQL connections are reaped. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
-#idle_timeout = 3600
+#idle_timeout=3600
 
 # Minimum number of SQL connections to keep open in a pool. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-#min_pool_size = 1
+#min_pool_size=1
 
 # Maximum number of SQL connections to keep open in a pool. Setting a value of 0
 # indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
+#max_pool_size=5
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
+#max_retries=10
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
+#retry_interval=10
 
 # If set, use this value for max_overflow with SQLAlchemy. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
+#max_overflow=50
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
+#connection_debug=0
 
 # Add Python stack traces to SQL as comment strings. (boolean value)
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
+#connection_trace=false
 
 # If set, use this value for pool_timeout with SQLAlchemy. (integer value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
+#pool_timeout=<None>
 
 # Enable the experimental use of database reconnect on connection lost. (boolean
 # value)
-#use_db_reconnect = false
+#use_db_reconnect=false
 
 # Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
+#db_retry_interval=1
 
 # If True, increases the interval between retries of a database operation up to
 # db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
+#db_inc_retry_interval=true
 
 # If db_inc_retry_interval is set, the maximum seconds between retries of a
 # database operation. (integer value)
-#db_max_retry_interval = 10
+#db_max_retry_interval=10
 
 # Maximum retries in case of connection error or deadlock error before error is
 # raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
+#db_max_retries=20
 
 #
 # From oslo.db.concurrency
@@ -454,7 +4518,562 @@
 # Enable the experimental use of thread pooling for all DB API calls (boolean
 # value)
 # Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
+#use_tpool=false
+
+
+[ephemeral_storage_encryption]
+
+#
+# From nova.conf
+#
+
+#
+# Enables/disables LVM ephemeral storage encryption.
+#  (boolean value)
+#enabled=false
+
+#
+# Cipher-mode string to be used.
+#
+# The cipher and mode to be used to encrypt ephemeral storage. The set of
+# cipher-mode combinations available depends on kernel support.
+#
+# Possible values:
+#
+# * Any crypto option listed in ``/proc/crypto``.
+#  (string value)
+#cipher=aes-xts-plain64
+
+#
+# Encryption key length in bits.
+#
+# The bit length of the encryption key to be used to encrypt ephemeral storage.
+# In XTS mode only half of the bits are used for encryption key.
+#  (integer value)
+# Minimum value: 1
+#key_size=512
+
+
+[filter_scheduler]
+
+#
+# From nova.conf
+#
+
+#
+# Size of subset of best hosts selected by scheduler.
+#
+# New instances will be scheduled on a host chosen randomly from a subset of the
+# N best hosts, where N is the value set by this option.
+#
+# Setting this to a value greater than 1 will reduce the chance that multiple
+# scheduler processes handling similar requests will select the same host,
+# creating a potential race condition. By selecting a host randomly from the N
+# hosts that best fit the request, the chance of a conflict is reduced. However,
+# the higher you set this value, the less optimal the chosen host may be for a
+# given request.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect.
+#
+# Possible values:
+#
+# * An integer, where the integer corresponds to the size of a host subset. Any
+#   integer is valid, although any value less than 1 will be treated as 1
+#  (integer value)
+# Minimum value: 1
+# Deprecated group/name - [DEFAULT]/scheduler_host_subset_size
+#host_subset_size=1
+
+#
+# The number of instances that can be actively performing IO on a host.
+#
+# Instances performing IO includes those in the following states: build, resize,
+# snapshot, migrate, rescue, unshelve.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'io_ops_filter' filter is enabled.
+#
+# Possible values:
+#
+# * An integer, where the integer corresponds to the max number of instances
+#   that can be actively performing IO on any given host.
+#  (integer value)
+# Deprecated group/name - [DEFAULT]/max_io_ops_per_host
+#max_io_ops_per_host=8
+
+#
+# Maximum number of instances that be active on a host.
+#
+# If you need to limit the number of instances on any given host, set this
+# option
+# to the maximum number of instances you want to allow. The num_instances_filter
+# will reject any host that has at least as many instances as this option's
+# value.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'num_instances_filter' filter is enabled.
+#
+# Possible values:
+#
+# * An integer, where the integer corresponds to the max instances that can be
+#   scheduled on a host.
+#  (integer value)
+# Deprecated group/name - [DEFAULT]/max_instances_per_host
+#max_instances_per_host=50
+
+#
+# Enable querying of individual hosts for instance information.
+#
+# The scheduler may need information about the instances on a host in order to
+# evaluate its filters and weighers. The most common need for this information
+# is
+# for the (anti-)affinity filters, which need to choose a host based on the
+# instances already running on a host.
+#
+# If the configured filters and weighers do not need this information, disabling
+# this option will improve performance. It may also be disabled when the
+# tracking
+# overhead proves too heavy, although this will cause classes requiring host
+# usage data to query the database on each request instead.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect.
+#  (boolean value)
+# Deprecated group/name - [DEFAULT]/scheduler_tracks_instance_changes
+#track_instance_changes=true
+
+#
+# Filters that the scheduler can use.
+#
+# An unordered list of the filter classes the nova scheduler may apply.  Only
+# the
+# filters specified in the 'scheduler_enabled_filters' option will be used, but
+# any filter appearing in that option must also be included in this list.
+#
+# By default, this is set to all filters that are included with nova.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect.
+#
+# Possible values:
+#
+# * A list of zero or more strings, where each string corresponds to the name of
+#   a filter that may be used for selecting a host
+#
+# Related options:
+#
+# * scheduler_enabled_filters
+#  (multi valued)
+# Deprecated group/name - [DEFAULT]/scheduler_available_filters
+#available_filters=nova.scheduler.filters.all_filters
+
+#
+# Filters that the scheduler will use.
+#
+# An ordered list of filter class names that will be used for filtering
+# hosts. Ignore the word 'default' in the name of this option: these filters
+# will
+# *always* be applied, and they will be applied in the order they are listed so
+# place your most restrictive filters first to make the filtering process more
+# efficient.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect.
+#
+# Possible values:
+#
+# * A list of zero or more strings, where each string corresponds to the name of
+#   a filter to be used for selecting a host
+#
+# Related options:
+#
+# * All of the filters in this option *must* be present in the
+#   'scheduler_available_filters' option, or a SchedulerHostFilterNotFound
+#   exception will be raised.
+#  (list value)
+# Deprecated group/name - [DEFAULT]/scheduler_default_filters
+#enabled_filters=RetryFilter,AvailabilityZoneFilter,RamFilter,DiskFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter
+
+#
+# Filters used for filtering baremetal hosts.
+#
+# Filters are applied in order, so place your most restrictive filters first to
+# make the filtering process more efficient.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect.
+#
+# Possible values:
+#
+# * A list of zero or more strings, where each string corresponds to the name of
+#   a filter to be used for selecting a baremetal host
+#
+# Related options:
+#
+# * If the 'scheduler_use_baremetal_filters' option is False, this option has
+#   no effect.
+#  (list value)
+# Deprecated group/name - [DEFAULT]/baremetal_scheduler_default_filters
+#baremetal_enabled_filters=RetryFilter,AvailabilityZoneFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ExactRamFilter,ExactDiskFilter,ExactCoreFilter
+
+#
+# Enable baremetal filters.
+#
+# Set this to True to tell the nova scheduler that it should use the filters
+# specified in the 'baremetal_scheduler_enabled_filters' option. If you are not
+# scheduling baremetal nodes, leave this at the default setting of False.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect.
+#
+# Related options:
+#
+# * If this option is set to True, then the filters specified in the
+#   'baremetal_scheduler_enabled_filters' are used instead of the filters
+#   specified in 'scheduler_enabled_filters'.
+#  (boolean value)
+# Deprecated group/name - [DEFAULT]/scheduler_use_baremetal_filters
+#use_baremetal_filters=false
+
+#
+# Weighers that the scheduler will use.
+#
+# Only hosts which pass the filters are weighed. The weight for any host starts
+# at 0, and the weighers order these hosts by adding to or subtracting from the
+# weight assigned by the previous weigher. Weights may become negative. An
+# instance will be scheduled to one of the N most-weighted hosts, where N is
+# 'scheduler_host_subset_size'.
+#
+# By default, this is set to all weighers that are included with Nova.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect.
+#
+# Possible values:
+#
+# * A list of zero or more strings, where each string corresponds to the name of
+#   a weigher that will be used for selecting a host
+#  (list value)
+# Deprecated group/name - [DEFAULT]/scheduler_weight_classes
+#weight_classes=nova.scheduler.weights.all_weighers
+
+#
+# Ram weight multipler ratio.
+#
+# This option determines how hosts with more or less available RAM are weighed.
+# A
+# positive value will result in the scheduler preferring hosts with more
+# available RAM, and a negative number will result in the scheduler preferring
+# hosts with less available RAM. Another way to look at it is that positive
+# values for this option will tend to spread instances across many hosts, while
+# negative values will tend to fill up (stack) hosts as much as possible before
+# scheduling to a less-used host. The absolute value, whether positive or
+# negative, controls how strong the RAM weigher is relative to other weighers.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'ram' weigher is enabled.
+#
+# Possible values:
+#
+# * An integer or float value, where the value corresponds to the multipler
+#   ratio for this weigher.
+#  (floating point value)
+# Deprecated group/name - [DEFAULT]/ram_weight_multiplier
+#ram_weight_multiplier=1.0
+
+#
+# Disk weight multipler ratio.
+#
+# Multiplier used for weighing free disk space. Negative numbers mean to
+# stack vs spread.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'ram' weigher is enabled.
+#
+# Possible values:
+#
+# * An integer or float value, where the value corresponds to the multipler
+#   ratio for this weigher.
+#  (floating point value)
+# Deprecated group/name - [DEFAULT]/disk_weight_multiplier
+#disk_weight_multiplier=1.0
+
+#
+# IO operations weight multipler ratio.
+#
+# This option determines how hosts with differing workloads are weighed.
+# Negative
+# values, such as the default, will result in the scheduler preferring hosts
+# with
+# lighter workloads whereas positive values will prefer hosts with heavier
+# workloads. Another way to look at it is that positive values for this option
+# will tend to schedule instances onto hosts that are already busy, while
+# negative values will tend to distribute the workload across more hosts. The
+# absolute value, whether positive or negative, controls how strong the io_ops
+# weigher is relative to other weighers.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'io_ops' weigher is enabled.
+#
+# Possible values:
+#
+# * An integer or float value, where the value corresponds to the multipler
+#   ratio for this weigher.
+#  (floating point value)
+# Deprecated group/name - [DEFAULT]/io_ops_weight_multiplier
+#io_ops_weight_multiplier=-1.0
+
+#
+# Multiplier used for weighing hosts for group soft-affinity.
+#
+# Possible values:
+#
+# * An integer or float value, where the value corresponds to weight multiplier
+#   for hosts with group soft affinity. Only a positive value are meaningful, as
+#   negative values would make this behave as a soft anti-affinity weigher.
+#  (floating point value)
+# Deprecated group/name - [DEFAULT]/soft_affinity_weight_multiplier
+#soft_affinity_weight_multiplier=1.0
+
+#
+# Multiplier used for weighing hosts for group soft-anti-affinity.
+#
+# Possible values:
+#
+# * An integer or float value, where the value corresponds to weight multiplier
+#   for hosts with group soft anti-affinity. Only a positive value are
+#   meaningful, as negative values would make this behave as a soft affinity
+#   weigher.
+#  (floating point value)
+# Deprecated group/name - [DEFAULT]/soft_anti_affinity_weight_multiplier
+#soft_anti_affinity_weight_multiplier=1.0
+
+#
+# List of UUIDs for images that can only be run on certain hosts.
+#
+# If there is a need to restrict some images to only run on certain designated
+# hosts, list those image UUIDs here.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'IsolatedHostsFilter' filter is enabled.
+#
+# Possible values:
+#
+# * A list of UUID strings, where each string corresponds to the UUID of an
+#   image
+#
+# Related options:
+#
+# * scheduler/isolated_hosts
+# * scheduler/restrict_isolated_hosts_to_isolated_images
+#  (list value)
+# Deprecated group/name - [DEFAULT]/isolated_images
+#isolated_images =
+
+#
+# List of hosts that can only run certain images.
+#
+# If there is a need to restrict some images to only run on certain designated
+# hosts, list those host names here.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'IsolatedHostsFilter' filter is enabled.
+#
+# Possible values:
+#
+# * A list of strings, where each string corresponds to the name of a host
+#
+# Related options:
+#
+# * scheduler/isolated_images
+# * scheduler/restrict_isolated_hosts_to_isolated_images
+#  (list value)
+# Deprecated group/name - [DEFAULT]/isolated_hosts
+#isolated_hosts =
+
+#
+# Prevent non-isolated images from being built on isolated hosts.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'IsolatedHostsFilter' filter is enabled. Even
+# then, this option doesn't affect the behavior of requests for isolated images,
+# which will *always* be restricted to isolated hosts.
+#
+# Related options:
+#
+# * scheduler/isolated_images
+# * scheduler/isolated_hosts
+#  (boolean value)
+# Deprecated group/name - [DEFAULT]/restrict_isolated_hosts_to_isolated_images
+#restrict_isolated_hosts_to_isolated_images=true
+
+#
+# Image property namespace for use in the host aggregate.
+#
+# Images and hosts can be configured so that certain images can only be
+# scheduled
+# to hosts in a particular aggregate. This is done with metadata values set on
+# the host aggregate that are identified by beginning with the value of this
+# option. If the host is part of an aggregate with such a metadata key, the
+# image
+# in the request spec must have the value of that metadata in its properties in
+# order for the scheduler to consider the host as acceptable.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'aggregate_image_properties_isolation' filter
+# is
+# enabled.
+#
+# Possible values:
+#
+# * A string, where the string corresponds to an image property namespace
+#
+# Related options:
+#
+# * aggregate_image_properties_isolation_separator
+#  (string value)
+# Deprecated group/name - [DEFAULT]/aggregate_image_properties_isolation_namespace
+#aggregate_image_properties_isolation_namespace=<None>
+
+#
+# Separator character(s) for image property namespace and name.
+#
+# When using the aggregate_image_properties_isolation filter, the relevant
+# metadata keys are prefixed with the namespace defined in the
+# aggregate_image_properties_isolation_namespace configuration option plus a
+# separator. This option defines the separator to be used.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'aggregate_image_properties_isolation' filter
+# is enabled.
+#
+# Possible values:
+#
+# * A string, where the string corresponds to an image property namespace
+#   separator character
+#
+# Related options:
+#
+# * aggregate_image_properties_isolation_namespace
+#  (string value)
+# Deprecated group/name - [DEFAULT]/aggregate_image_properties_isolation_separator
+#aggregate_image_properties_isolation_separator=.
+
+
+[glance]
+# Configuration options for the Image service
+
+#
+# From nova.conf
+#
+
+#
+# List of glance api servers endpoints available to nova.
+#
+# https is used for ssl-based glance api servers.
+#
+# Possible values:
+#
+# * A list of any fully qualified url of the form
+# "scheme://hostname:port[/path]"
+#   (i.e. "http://10.0.1.0:9292" or "https://my.glance.server/image").
+#  (list value)
+#api_servers=<None>
+api_servers = http://192.168.10.35:9292
+
+
+#
+# Enable insecure SSL (https) requests to glance.
+#
+# This setting can be used to turn off verification of the glance server
+# certificate against the certificate authorities.
+#  (boolean value)
+#api_insecure=false
+
+#
+# Enable glance operation retries.
+#
+# Specifies the number of retries when uploading / downloading
+# an image to / from glance. 0 means no retries.
+#  (integer value)
+# Minimum value: 0
+#num_retries=0
+
+#
+# List of url schemes that can be directly accessed.
+#
+# This option specifies a list of url schemes that can be downloaded
+# directly via the direct_url. This direct_URL can be fetched from
+# Image metadata which can be used by nova to get the
+# image more efficiently. nova-compute could benefit from this by
+# invoking a copy when it has access to the same file system as glance.
+#
+# Possible values:
+#
+# * [file], Empty list (default)
+#  (list value)
+#allowed_direct_url_schemes =
+
+#
+# Enable image signature verification.
+#
+# nova uses the image signature metadata from glance and verifies the signature
+# of a signed image while downloading that image. If the image signature cannot
+# be verified or if the image signature metadata is either incomplete or
+# unavailable, then nova will not boot the image and instead will place the
+# instance into an error state. This provides end users with stronger assurances
+# of the integrity of the image data they are using to create servers.
+#
+# Related options:
+#
+# * The options in the `key_manager` group, as the key_manager is used
+#   for the signature validation.
+#  (boolean value)
+#verify_glance_signatures=false
+
+# Enable or disable debug logging with glanceclient. (boolean value)
+#debug=false
+
+
+[guestfs]
+#
+# libguestfs is a set of tools for accessing and modifying virtual
+# machine (VM) disk images. You can use this for viewing and editing
+# files inside guests, scripting changes to VMs, monitoring disk
+# used/free statistics, creating guests, P2V, V2V, performing backups,
+# cloning VMs, building VMs, formatting disks and resizing disks.
+
+#
+# From nova.conf
+#
+
+#
+# Enable/disables guestfs logging.
+#
+# This configures guestfs to debug messages and push them to Openstack
+# logging system. When set to True, it traces libguestfs API calls and
+# enable verbose debug messages. In order to use the above feature,
+# "libguestfs" package must be installed.
+#
+# Related options:
+# Since libguestfs access and modifies VM's managed by libvirt, below options
+# should be set to give access to those VM's.
+#     * libvirt.inject_key
+#     * libvirt.inject_partition
+#     * libvirt.inject_password
+#  (boolean value)
+#debug=false
 
 
 [healthcheck]
@@ -466,10 +5085,10 @@
 # DEPRECATED: The path to respond to healtcheck requests on. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#path = /healthcheck
+#path=/healthcheck
 
 # Show more detailed information as part of the response (boolean value)
-#detailed = false
+#detailed=false
 
 # Additional backends that can perform health checks and report that information
 # back as part of a request. (list value)
@@ -477,7 +5096,7 @@
 
 # Check the presence of a file to determine if an application is running on a
 # port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
+#disable_by_file_path=<None>
 
 # Check the presence of a file based on a port to determine if an application is
 # running on a port. Expects a "port:path" list of strings. Used by
@@ -485,57 +5104,490 @@
 #disable_by_file_paths =
 
 
+[hyperv]
+#
+# The hyperv feature allows you to configure the Hyper-V hypervisor
+# driver to be used within an OpenStack deployment.
+
+#
+# From nova.conf
+#
+
+#
+# Dynamic memory ratio
+#
+# Enables dynamic memory allocation (ballooning) when set to a value
+# greater than 1. The value expresses the ratio between the total RAM
+# assigned to an instance and its startup RAM amount. For example a
+# ratio of 2.0 for an instance with 1024MB of RAM implies 512MB of
+# RAM allocated at startup.
+#
+# Possible values:
+#
+# * 1.0: Disables dynamic memory allocation (Default).
+# * Float values greater than 1.0: Enables allocation of total implied
+#   RAM divided by this value for startup.
+#  (floating point value)
+#dynamic_memory_ratio=1.0
+
+#
+# Enable instance metrics collection
+#
+# Enables metrics collections for an instance by using Hyper-V's
+# metric APIs. Collected data can by retrieved by other apps and
+# services, e.g.: Ceilometer.
+#  (boolean value)
+#enable_instance_metrics_collection=false
+
+#
+# Instances path share
+#
+# The name of a Windows share mapped to the "instances_path" dir
+# and used by the resize feature to copy files to the target host.
+# If left blank, an administrative share (hidden network share) will
+# be used, looking for the same "instances_path" used locally.
+#
+# Possible values:
+#
+# * "": An administrative share will be used (Default).
+# * Name of a Windows share.
+#
+# Related options:
+#
+# * "instances_path": The directory which will be used if this option
+#   here is left blank.
+#  (string value)
+#instances_path_share =
+
+#
+# Limit CPU features
+#
+# This flag is needed to support live migration to hosts with
+# different CPU features and checked during instance creation
+# in order to limit the CPU features used by the instance.
+#  (boolean value)
+#limit_cpu_features=false
+
+#
+# Mounted disk query retry count
+#
+# The number of times to retry checking for a mounted disk.
+# The query runs until the device can be found or the retry
+# count is reached.
+#
+# Possible values:
+#
+# * Positive integer values. Values greater than 1 is recommended
+#   (Default: 10).
+#
+# Related options:
+#
+# * Time interval between disk mount retries is declared with
+#   "mounted_disk_query_retry_interval" option.
+#  (integer value)
+# Minimum value: 0
+#mounted_disk_query_retry_count=10
+
+#
+# Mounted disk query retry interval
+#
+# Interval between checks for a mounted disk, in seconds.
+#
+# Possible values:
+#
+# * Time in seconds (Default: 5).
+#
+# Related options:
+#
+# * This option is meaningful when the mounted_disk_query_retry_count
+#   is greater than 1.
+# * The retry loop runs with mounted_disk_query_retry_count and
+#   mounted_disk_query_retry_interval configuration options.
+#  (integer value)
+# Minimum value: 0
+#mounted_disk_query_retry_interval=5
+
+#
+# Power state check timeframe
+#
+# The timeframe to be checked for instance power state changes.
+# This option is used to fetch the state of the instance from Hyper-V
+# through the WMI interface, within the specified timeframe.
+#
+# Possible values:
+#
+# * Timeframe in seconds (Default: 60).
+#  (integer value)
+# Minimum value: 0
+#power_state_check_timeframe=60
+
+#
+# Power state event polling interval
+#
+# Instance power state change event polling frequency. Sets the
+# listener interval for power state events to the given value.
+# This option enhances the internal lifecycle notifications of
+# instances that reboot themselves. It is unlikely that an operator
+# has to change this value.
+#
+# Possible values:
+#
+# * Time in seconds (Default: 2).
+#  (integer value)
+# Minimum value: 0
+#power_state_event_polling_interval=2
+
+#
+# qemu-img command
+#
+# qemu-img is required for some of the image related operations
+# like converting between different image types. You can get it
+# from here: (http://qemu.weilnetz.de/) or you can install the
+# Cloudbase OpenStack Hyper-V Compute Driver
+# (https://cloudbase.it/openstack-hyperv-driver/) which automatically
+# sets the proper path for this config option. You can either give the
+# full path of qemu-img.exe or set its path in the PATH environment
+# variable and leave this option to the default value.
+#
+# Possible values:
+#
+# * Name of the qemu-img executable, in case it is in the same
+#   directory as the nova-compute service or its path is in the
+#   PATH environment variable (Default).
+# * Path of qemu-img command (DRIVELETTER:\PATH\TO\QEMU-IMG\COMMAND).
+#
+# Related options:
+#
+# * If the config_drive_cdrom option is False, qemu-img will be used to
+#   convert the ISO to a VHD, otherwise the configuration drive will
+#   remain an ISO. To use configuration drive with Hyper-V, you must
+#   set the mkisofs_cmd value to the full path to an mkisofs.exe
+#   installation.
+#  (string value)
+#qemu_img_cmd=qemu-img.exe
+
+#
+# External virtual switch name
+#
+# The Hyper-V Virtual Switch is a software-based layer-2 Ethernet
+# network switch that is available with the installation of the
+# Hyper-V server role. The switch includes programmatically managed
+# and extensible capabilities to connect virtual machines to both
+# virtual networks and the physical network. In addition, Hyper-V
+# Virtual Switch provides policy enforcement for security, isolation,
+# and service levels. The vSwitch represented by this config option
+# must be an external one (not internal or private).
+#
+# Possible values:
+#
+# * If not provided, the first of a list of available vswitches
+#   is used. This list is queried using WQL.
+# * Virtual switch name.
+#  (string value)
+#vswitch_name=<None>
+
+#
+# Wait soft reboot seconds
+#
+# Number of seconds to wait for instance to shut down after soft
+# reboot request is made. We fall back to hard reboot if instance
+# does not shutdown within this window.
+#
+# Possible values:
+#
+# * Time in seconds (Default: 60).
+#  (integer value)
+# Minimum value: 0
+#wait_soft_reboot_seconds=60
+
+#
+# Configuration drive cdrom
+#
+# OpenStack can be configured to write instance metadata to
+# a configuration drive, which is then attached to the
+# instance before it boots. The configuration drive can be
+# attached as a disk drive (default) or as a CD drive.
+#
+# Possible values:
+#
+# * True: Attach the configuration drive image as a CD drive.
+# * False: Attach the configuration drive image as a disk drive (Default).
+#
+# Related options:
+#
+# * This option is meaningful with force_config_drive option set to 'True'
+#   or when the REST API call to create an instance will have
+#   '--config-drive=True' flag.
+# * config_drive_format option must be set to 'iso9660' in order to use
+#   CD drive as the configuration drive image.
+# * To use configuration drive with Hyper-V, you must set the
+#   mkisofs_cmd value to the full path to an mkisofs.exe installation.
+#   Additionally, you must set the qemu_img_cmd value to the full path
+#   to an qemu-img command installation.
+# * You can configure the Compute service to always create a configuration
+#   drive by setting the force_config_drive option to 'True'.
+#  (boolean value)
+#config_drive_cdrom=false
+config_drive_cdrom=false
+
+#
+# Configuration drive inject password
+#
+# Enables setting the admin password in the configuration drive image.
+#
+# Related options:
+#
+# * This option is meaningful when used with other options that enable
+#   configuration drive usage with Hyper-V, such as force_config_drive.
+# * Currently, the only accepted config_drive_format is 'iso9660'.
+#  (boolean value)
+#config_drive_inject_password=false
+config_drive_inject_password=false
+
+#
+# Volume attach retry count
+#
+# The number of times to retry attaching a volume. Volume attachment
+# is retried until success or the given retry count is reached.
+#
+# Possible values:
+#
+# * Positive integer values (Default: 10).
+#
+# Related options:
+#
+# * Time interval between attachment attempts is declared with
+#   volume_attach_retry_interval option.
+#  (integer value)
+# Minimum value: 0
+#volume_attach_retry_count=10
+
+#
+# Volume attach retry interval
+#
+# Interval between volume attachment attempts, in seconds.
+#
+# Possible values:
+#
+# * Time in seconds (Default: 5).
+#
+# Related options:
+#
+# * This options is meaningful when volume_attach_retry_count
+#   is greater than 1.
+# * The retry loop runs with volume_attach_retry_count and
+#   volume_attach_retry_interval configuration options.
+#  (integer value)
+# Minimum value: 0
+#volume_attach_retry_interval=5
+
+#
+# Enable RemoteFX feature
+#
+# This requires at least one DirectX 11 capable graphics adapter for
+# Windows / Hyper-V Server 2012 R2 or newer and RDS-Virtualization
+# feature has to be enabled.
+#
+# Instances with RemoteFX can be requested with the following flavor
+# extra specs:
+#
+# **os:resolution**. Guest VM screen resolution size. Acceptable values::
+#
+#     1024x768, 1280x1024, 1600x1200, 1920x1200, 2560x1600, 3840x2160
+#
+# ``3840x2160`` is only available on Windows / Hyper-V Server 2016.
+#
+# **os:monitors**. Guest VM number of monitors. Acceptable values::
+#
+#     [1, 4] - Windows / Hyper-V Server 2012 R2
+#     [1, 8] - Windows / Hyper-V Server 2016
+#
+# **os:vram**. Guest VM VRAM amount. Only available on
+# Windows / Hyper-V Server 2016. Acceptable values::
+#
+#     64, 128, 256, 512, 1024
+#  (boolean value)
+#enable_remotefx=false
+
+#
+# Use multipath connections when attaching iSCSI or FC disks.
+#
+# This requires the Multipath IO Windows feature to be enabled. MPIO must be
+# configured to claim such devices.
+#  (boolean value)
+#use_multipath_io=false
+
+#
+# List of iSCSI initiators that will be used for estabilishing iSCSI sessions.
+#
+# If none are specified, the Microsoft iSCSI initiator service will choose the
+# initiator.
+#  (list value)
+#iscsi_initiator_list =
+
+
+[image_file_url]
+
+#
+# From nova.conf
+#
+
+# DEPRECATED:
+# List of file systems that are configured in this file in the
+# image_file_url:<list entry name> sections
+#  (list value)
+# This option is deprecated for removal since 14.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The feature to download images from glance via filesystem is not used and will
+# be removed in the future.
+#filesystems =
+
+
+
+
+
+[key_manager]
+
+#
+# From nova.conf
+#
+
+#
+# Fixed key returned by key manager, specified in hex.
+#
+# Possible values:
+#
+# * Empty string or a key in hex value
+#  (string value)
+# Deprecated group/name - [keymgr]/fixed_key
+#fixed_key=<None>
+
+# The full class name of the key manager API class (string value)
+
+# The type of authentication credential to create. Possible values are 'token',
+# 'password', 'keystone_token', and 'keystone_password'. Required if no context
+# is passed to the credential factory. (string value)
+#auth_type=<None>
+
+# Token for authentication. Required for 'token' and 'keystone_token' auth_type
+# if no context is passed to the credential factory. (string value)
+#token=<None>
+
+# Username for authentication. Required for 'password' auth_type. Optional for
+# the 'keystone_password' auth_type. (string value)
+#username=<None>
+
+# Password for authentication. Required for 'password' and 'keystone_password'
+# auth_type. (string value)
+#password=<None>
+
+# User ID for authentication. Optional for 'keystone_token' and
+# 'keystone_password' auth_type. (string value)
+#user_id=<None>
+
+# User's domain ID for authentication. Optional for 'keystone_token' and
+# 'keystone_password' auth_type. (string value)
+#user_domain_id=<None>
+
+# User's domain name for authentication. Optional for 'keystone_token' and
+# 'keystone_password' auth_type. (string value)
+#user_domain_name=<None>
+
+# Trust ID for trust scoping. Optional for 'keystone_token' and
+# 'keystone_password' auth_type. (string value)
+#trust_id=<None>
+
+# Domain ID for domain scoping. Optional for 'keystone_token' and
+# 'keystone_password' auth_type. (string value)
+#domain_id=<None>
+
+# Domain name for domain scoping. Optional for 'keystone_token' and
+# 'keystone_password' auth_type. (string value)
+#domain_name=<None>
+
+# Project ID for project scoping. Optional for 'keystone_token' and
+# 'keystone_password' auth_type. (string value)
+#project_id=<None>
+
+# Project name for project scoping. Optional for 'keystone_token' and
+# 'keystone_password' auth_type. (string value)
+#project_name=<None>
+
+# Project's domain ID for project. Optional for 'keystone_token' and
+# 'keystone_password' auth_type. (string value)
+#project_domain_id=<None>
+
+# Project's domain name for project. Optional for 'keystone_token' and
+# 'keystone_password' auth_type. (string value)
+#project_domain_name=<None>
+
+# Allow fetching a new token if the current one is going to expire. Optional for
+# 'keystone_token' and 'keystone_password' auth_type. (boolean value)
+#reauthenticate=true
+
+
 [keystone_authtoken]
 
 #
 # From keystonemiddleware.auth_token
 #
-
+signing_dirname=/tmp/keystone-signing-nova
+revocation_cache_time = 10
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = nova
+password = opnfv_secret
+auth_uri=http://192.168.10.35:5000
+auth_url=http://192.168.10.35:35357
+memcached_servers=192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
 # Complete "public" Identity API endpoint. This endpoint should not be an
 # "admin" endpoint, as it should be accessible by all end users. Unauthenticated
 # clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
-#auth_uri = <None>
+# endpoint should  ideally be unversioned, client support in the wild varies.
+# If you're using a versioned v2 endpoint here, then this  should *not* be the
+# same endpoint the service user utilizes  for validating tokens, because normal
+# end users may not be  able to reach that endpoint. (string value)
+#auth_uri=<None>
 
 # API version of the admin Identity API endpoint. (string value)
-#auth_version = <None>
+#auth_version=<None>
 
 # Do not handle authorization requests within the middleware, but delegate the
 # authorization decision to downstream WSGI components. (boolean value)
-#delay_auth_decision = false
+#delay_auth_decision=false
 
 # Request timeout value for communicating with Identity API server. (integer
 # value)
-#http_connect_timeout = <None>
+#http_connect_timeout=<None>
 
 # How many times are we trying to reconnect when communicating with Identity API
 # Server. (integer value)
-#http_request_max_retries = 3
+#http_request_max_retries=3
 
 # Request environment key where the Swift cache object is stored. When
 # auth_token middleware is deployed with a Swift cache, use this option to have
 # the middleware share a caching backend with swift. Otherwise, use the
 # ``memcached_servers`` option instead. (string value)
-#cache = <None>
+#cache=<None>
 
 # Required if identity server requires client certificate (string value)
-#certfile = <None>
+#certfile=<None>
 
 # Required if identity server requires client certificate (string value)
-#keyfile = <None>
+#keyfile=<None>
 
 # A PEM encoded Certificate Authority to use when verifying HTTPs connections.
 # Defaults to system CAs. (string value)
-#cafile = <None>
+#cafile=<None>
 
 # Verify HTTPS connections. (boolean value)
-#insecure = false
+#insecure=false
 
 # The region in which the identity server can be found. (string value)
-#region_name = <None>
+#region_name=<None>
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P release.
@@ -543,17 +5595,17 @@
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
-#signing_dir = <None>
+#signing_dir=<None>
 
 # Optionally specify a list of memcached server(s) to use for caching. If left
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
-#memcached_servers = <None>
+#memcached_servers=<None>
 
 # In order to prevent excessive effort spent validating tokens, the middleware
 # caches previously-seen tokens for a configurable duration (in seconds). Set to
 # -1 to disable caching completely. (integer value)
-#token_cache_time = 300
+#token_cache_time=300
 
 # DEPRECATED: Determines the frequency at which the list of revoked tokens is
 # retrieved from the Identity service (in seconds). A high number of revocation
@@ -563,7 +5615,7 @@
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
+#revocation_cache_time=10
 
 # (Optional) If defined, indicate whether token data should be authenticated or
 # authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
@@ -571,40 +5623,40 @@
 # cache. If the value is not one of these options or empty, auth_token will
 # raise an exception on initialization. (string value)
 # Allowed values: None, MAC, ENCRYPT
-#memcache_security_strategy = None
+#memcache_security_strategy=None
 
 # (Optional, mandatory if memcache_security_strategy is defined) This string is
 # used for key derivation. (string value)
-#memcache_secret_key = <None>
+#memcache_secret_key=<None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
-#memcache_pool_dead_retry = 300
+#memcache_pool_dead_retry=300
 
 # (Optional) Maximum total number of open connections to every memcached server.
 # (integer value)
-#memcache_pool_maxsize = 10
+#memcache_pool_maxsize=10
 
 # (Optional) Socket timeout in seconds for communicating with a memcached
 # server. (integer value)
-#memcache_pool_socket_timeout = 3
+#memcache_pool_socket_timeout=3
 
 # (Optional) Number of seconds a connection to memcached is held unused in the
 # pool before it is closed. (integer value)
-#memcache_pool_unused_timeout = 60
+#memcache_pool_unused_timeout=60
 
 # (Optional) Number of seconds that an operation will wait to get a memcached
 # client connection from the pool. (integer value)
-#memcache_pool_conn_get_timeout = 10
+#memcache_pool_conn_get_timeout=10
 
 # (Optional) Use the advanced (eventlet safe) memcached client pool. The
 # advanced pool will only work under python 2.x. (boolean value)
-#memcache_use_advanced_pool = false
+#memcache_use_advanced_pool=false
 
 # (Optional) Indicate whether to set the X-Service-Catalog header. If False,
 # middleware will not ask for service catalog on token validation and will not
 # set the X-Service-Catalog header. (boolean value)
-#include_service_catalog = true
+#include_service_catalog=true
 
 # Used to control the use and type of token binding. Can be set to: "disabled"
 # to not check token binding. "permissive" (default) to validate binding
@@ -613,7 +5665,7 @@
 # be rejected. "required" any form of token binding is needed to be allowed.
 # Finally the name of a binding method that must be present in tokens. (string
 # value)
-#enforce_token_bind = permissive
+#enforce_token_bind=permissive
 
 # DEPRECATED: If true, the revocation list will be checked for cached tokens.
 # This requires that PKI tokens are configured on the identity server. (boolean
@@ -621,7 +5673,7 @@
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
-#check_revocations_for_cached = false
+#check_revocations_for_cached=false
 
 # DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
 # single algorithm or multiple. The algorithms are those supported by Python
@@ -634,7 +5686,7 @@
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
-#hash_algorithms = md5
+#hash_algorithms=md5
 
 # A choice of roles that must be present in a service token. Service tokens are
 # allowed to request that an expired token can be used and so this check should
@@ -642,13 +5694,13 @@
 # here are applied as an ANY check so any role in this list must be present. For
 # backwards compatibility reasons this currently only affects the allow_expired
 # check. (list value)
-#service_token_roles = service
+#service_token_roles=service
 
 # For backwards compatibility reasons we must let valid service tokens pass that
 # don't pass the service_token_roles check as valid. Setting this true will
 # become the default in a future release and should be enabled if possible.
 # (boolean value)
-#service_token_roles_required = false
+#service_token_roles_required=false
 
 # Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
 # (string value)
@@ -656,43 +5708,1006 @@
 
 # Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
 # (string value)
-#auth_host = 127.0.0.1
+#auth_host=127.0.0.1
 
 # Port of the admin Identity API endpoint. Deprecated, use identity_uri.
 # (integer value)
-#auth_port = 35357
+#auth_port=35357
 
 # Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
 # (string value)
 # Allowed values: http, https
-#auth_protocol = https
+#auth_protocol=https
 
 # Complete admin Identity API endpoint. This should specify the unversioned root
 # endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
+#identity_uri=<None>
 
 # This option is deprecated and may be removed in a future release. Single
 # shared secret with the Keystone configuration used for bootstrapping a
 # Keystone installation, or otherwise bypassing the normal authentication
 # process. This option should not be used, use `admin_user` and `admin_password`
 # instead. (string value)
-#admin_token = <None>
+#admin_token=<None>
 
 # Service username. (string value)
-#admin_user = <None>
+#admin_user=<None>
 
 # Service user password. (string value)
-#admin_password = <None>
+#admin_password=<None>
 
 # Service tenant name. (string value)
-#admin_tenant_name = admin
+#admin_tenant_name=admin
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
-#auth_type = <None>
+#auth_type=<None>
 
 # Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#auth_section=<None>
+
+
+[libvirt]
+#
+# Libvirt options allows cloud administrator to configure related
+# libvirt hypervisor driver to be used within an OpenStack deployment.
+#
+# Almost all of the libvirt config options are influence by ``virt_type`` config
+# which describes the virtualization type (or so called domain type) libvirt
+# should use for specific features such as live migration, snapshot.
+
+#
+# From nova.conf
+#
+cpu_mode = host-passthrough
+virt_type = kvm
+
+inject_partition=-2
+inject_password=False
+
+disk_cachemodes="file=directsync,block=none"
+block_migration_flag=VIR_MIGRATE_UNDEFINE_SOURCE,VIR_MIGRATE_PEER2PEER,VIR_MIGRATE_LIVE,VIR_MIGRATE_NON_SHARED_INC
+live_migration_flag=VIR_MIGRATE_UNDEFINE_SOURCE,VIR_MIGRATE_PEER2PEER,VIR_MIGRATE_LIVE,VIR_MIGRATE_PERSIST_DEST
+inject_key=True
+vif_driver=nova.virt.libvirt.vif.LibvirtGenericVIFDriver
+
+# The ID of the image to boot from to rescue data from a corrupted instance.
+#
+# If the rescue REST API operation doesn't provide an ID of an image to
+# use, the image which is referenced by this ID is used. If this
+# option is not set, the image from the instance is used.
+#
+# Possible values:
+#
+# * An ID of an image or nothing. If it points to an *Amazon Machine
+#   Image* (AMI), consider to set the config options ``rescue_kernel_id``
+#   and ``rescue_ramdisk_id`` too. If nothing is set, the image of the instance
+#   is used.
+#
+# Related options:
+#
+# * ``rescue_kernel_id``: If the chosen rescue image allows the separate
+#   definition of its kernel disk, the value of this option is used,
+#   if specified. This is the case when *Amazon*'s AMI/AKI/ARI image
+#   format is used for the rescue image.
+# * ``rescue_ramdisk_id``: If the chosen rescue image allows the separate
+#   definition of its RAM disk, the value of this option is used if,
+#   specified. This is the case when *Amazon*'s AMI/AKI/ARI image
+#   format is used for the rescue image.
+#  (string value)
+#rescue_image_id=<None>
+
+#
+# The ID of the kernel (AKI) image to use with the rescue image.
+#
+# If the chosen rescue image allows the separate definition of its kernel
+# disk, the value of this option is used, if specified. This is the case
+# when *Amazon*'s AMI/AKI/ARI image format is used for the rescue image.
+#
+# Possible values:
+#
+# * An ID of an kernel image or nothing. If nothing is specified, the kernel
+#   disk from the instance is used if it was launched with one.
+#
+# Related options:
+#
+# * ``rescue_image_id``: If that option points to an image in *Amazon*'s
+#   AMI/AKI/ARI image format, it's useful to use ``rescue_kernel_id`` too.
+#  (string value)
+#rescue_kernel_id=<None>
+
+#
+# The ID of the RAM disk (ARI) image to use with the rescue image.
+#
+# If the chosen rescue image allows the separate definition of its RAM
+# disk, the value of this option is used, if specified. This is the case
+# when *Amazon*'s AMI/AKI/ARI image format is used for the rescue image.
+#
+# Possible values:
+#
+# * An ID of a RAM disk image or nothing. If nothing is specified, the RAM
+#   disk from the instance is used if it was launched with one.
+#
+# Related options:
+#
+# * ``rescue_image_id``: If that option points to an image in *Amazon*'s
+#   AMI/AKI/ARI image format, it's useful to use ``rescue_ramdisk_id`` too.
+#  (string value)
+#rescue_ramdisk_id=<None>
+
+#
+# Describes the virtualization type (or so called domain type) libvirt should
+# use.
+#
+# The choice of this type must match the underlying virtualization strategy
+# you have chosen for this host.
+#
+# Possible values:
+#
+# * See the predefined set of case-sensitive values.
+#
+# Related options:
+#
+# * ``connection_uri``: depends on this
+# * ``disk_prefix``: depends on this
+# * ``cpu_mode``: depends on this
+# * ``cpu_model``: depends on this
+#  (string value)
+# Allowed values: kvm, lxc, qemu, uml, xen, parallels
+#virt_type=kvm
+
+#
+# Overrides the default libvirt URI of the chosen virtualization type.
+#
+# If set, Nova will use this URI to connect to libvirt.
+#
+# Possible values:
+#
+# * An URI like ``qemu:///system`` or ``xen+ssh://oirase/`` for example.
+#   This is only necessary if the URI differs to the commonly known URIs
+#   for the chosen virtualization type.
+#
+# Related options:
+#
+# * ``virt_type``: Influences what is used as default value here.
+#  (string value)
+#connection_uri =
+
+#
+# Allow the injection of an admin password for instance only at ``create`` and
+# ``rebuild`` process.
+#
+# There is no agent needed within the image to do this. If *libguestfs* is
+# available on the host, it will be used. Otherwise *nbd* is used. The file
+# system of the image will be mounted and the admin password, which is provided
+# in the REST API call will be injected as password for the root user. If no
+# root user is available, the instance won't be launched and an error is thrown.
+# Be aware that the injection is *not* possible when the instance gets launched
+# from a volume.
+#
+# Possible values:
+#
+# * True: Allows the injection.
+# * False (default): Disallows the injection. Any via the REST API provided
+# admin password will be silently ignored.
+#
+# Related options:
+#
+# * ``inject_partition``: That option will decide about the discovery and usage
+#   of the file system. It also can disable the injection at all.
+#  (boolean value)
+#inject_password=false
+
+#
+# Allow the injection of an SSH key at boot time.
+#
+# There is no agent needed within the image to do this. If *libguestfs* is
+# available on the host, it will be used. Otherwise *nbd* is used. The file
+# system of the image will be mounted and the SSH key, which is provided
+# in the REST API call will be injected as SSH key for the root user and
+# appended to the ``authorized_keys`` of that user. The SELinux context will
+# be set if necessary. Be aware that the injection is *not* possible when the
+# instance gets launched from a volume.
+#
+# This config option will enable directly modifying the instance disk and does
+# not affect what cloud-init may do using data from config_drive option or the
+# metadata service.
+#
+# Related options:
+#
+# * ``inject_partition``: That option will decide about the discovery and usage
+#   of the file system. It also can disable the injection at all.
+#  (boolean value)
+#inject_key=false
+
+#
+# Determines the way how the file system is chosen to inject data into it.
+#
+# *libguestfs* will be used a first solution to inject data. If that's not
+# available on the host, the image will be locally mounted on the host as a
+# fallback solution. If libguestfs is not able to determine the root partition
+# (because there are more or less than one root partition) or cannot mount the
+# file system it will result in an error and the instance won't be boot.
+#
+# Possible values:
+#
+# * -2 => disable the injection of data.
+# * -1 => find the root partition with the file system to mount with libguestfs
+# *  0 => The image is not partitioned
+# * >0 => The number of the partition to use for the injection
+#
+# Related options:
+#
+# * ``inject_key``: If this option allows the injection of a SSH key it depends
+#   on value greater or equal to -1 for ``inject_partition``.
+# * ``inject_password``: If this option allows the injection of an admin
+# password
+#   it depends on value greater or equal to -1 for ``inject_partition``.
+# * ``guestfs`` You can enable the debug log level of libguestfs with this
+#   config option. A more verbose output will help in debugging issues.
+# * ``virt_type``: If you use ``lxc`` as virt_type it will be treated as a
+#   single partition image
+#  (integer value)
+# Minimum value: -2
+#inject_partition=-2
+
+# DEPRECATED:
+# Enable a mouse cursor within a graphical VNC or SPICE sessions.
+#
+# This will only be taken into account if the VM is fully virtualized and VNC
+# and/or SPICE is enabled. If the node doesn't support a graphical framebuffer,
+# then it is valid to set this to False.
+#
+# Related options:
+# * ``[vnc]enabled``: If VNC is enabled, ``use_usb_tablet`` will have an effect.
+# * ``[spice]enabled`` + ``[spice].agent_enabled``: If SPICE is enabled and the
+#   spice agent is disabled, the config value of ``use_usb_tablet`` will have
+#   an effect.
+#  (boolean value)
+# This option is deprecated for removal since 14.0.0.
+# Its value may be silently ignored in the future.
+# Reason: This option is being replaced by the 'pointer_model' option.
+#use_usb_tablet=true
+
+#
+# The IP address or hostname to be used as the target for live migration
+# traffic.
+#
+# If this option is set to None, the hostname of the migration target compute
+# node will be used.
+#
+# This option is useful in environments where the live-migration traffic can
+# impact the network plane significantly. A separate network for live-migration
+# traffic can then use this config option and avoids the impact on the
+# management network.
+#
+# Possible values:
+#
+# * A valid IP address or hostname, else None.
+#  (string value)
+#live_migration_inbound_addr=<None>
+live_migration_inbound_addr = 192.168.10.53
+
+# DEPRECATED:
+# Live migration target URI to use.
+#
+# Override the default libvirt live migration target URI (which is dependent
+# on virt_type). Any included "%s" is replaced with the migration target
+# hostname.
+#
+# If this option is set to None (which is the default), Nova will automatically
+# generate the `live_migration_uri` value based on only 3 supported `virt_type`
+# in following list:
+# * 'kvm': 'qemu+tcp://%s/system'
+# * 'qemu': 'qemu+tcp://%s/system'
+# * 'xen': 'xenmigr://%s/system'
+#
+# Related options:
+# * ``live_migration_inbound_addr``: If ``live_migration_inbound_addr`` value
+#   is not None, the ip/hostname address of target compute node is used instead
+#   of ``live_migration_uri`` as the uri for live migration.
+# * ``live_migration_scheme``: If ``live_migration_uri`` is not set, the scheme
+#   used for live migration is taken from ``live_migration_scheme`` instead.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# live_migration_uri is deprecated for removal in favor of two other options
+# that
+# allow to change live migration scheme and target URI:
+# ``live_migration_scheme``
+# and ``live_migration_inbound_addr`` respectively.
+#live_migration_uri=<None>
+
+#
+# Schema used for live migration.
+#
+# Override the default libvirt live migration scheme (which is dependant on
+# virt_type). If this option is set to None, nova will automatically choose a
+# sensible default based on the hypervisor. It is not recommended that you
+# change
+# this unless you are very sure that hypervisor supports a particular scheme.
+#
+# Related options:
+# * ``virt_type``: This option is meaningful only when ``virt_type`` is set to
+#   `kvm` or `qemu`.
+# * ``live_migration_uri``: If ``live_migration_uri`` value is not None, the
+#   scheme used for live migration is taken from ``live_migration_uri`` instead.
+#  (string value)
+#live_migration_scheme=<None>
+#
+# Enable tunnelled migration.
+#
+# This option enables the tunnelled migration feature, where migration data is
+# transported over the libvirtd connection. If enabled, we use the
+# VIR_MIGRATE_TUNNELLED migration flag, avoiding the need to configure
+# the network to allow direct hypervisor to hypervisor communication.
+# If False, use the native transport. If not set, Nova will choose a
+# sensible default based on, for example the availability of native
+# encryption support in the hypervisor. Enable this option will definitely
+# impact performance massively.
+#
+# Note that this option is NOT compatible with use of block migration.
+#
+# Possible values:
+#
+# * Supersedes and (if set) overrides the deprecated 'live_migration_flag' and
+#   'block_migration_flag' to enable tunneled migration.
+#  (boolean value)
+#live_migration_tunnelled=false
+
+#
+# Maximum bandwidth(in MiB/s) to be used during migration.
+#
+# If set to 0, the hypervisor will choose a suitable default. Some hypervisors
+# do not support this feature and will return an error if bandwidth is not 0.
+# Please refer to the libvirt documentation for further details.
+#  (integer value)
+#live_migration_bandwidth=0
+
+#
+# Maximum permitted downtime, in milliseconds, for live migration
+# switchover.
+#
+# Will be rounded up to a minimum of 100ms. You can increase this value
+# if you want to allow live-migrations to complete faster, or avoid
+# live-migration timeout errors by allowing the guest to be paused for
+# longer during the live-migration switch over.
+#
+# Related options:
+#
+# * live_migration_completion_timeout
+#  (integer value)
+#live_migration_downtime=500
+
+#
+# Number of incremental steps to reach max downtime value.
+#
+# Will be rounded up to a minimum of 3 steps.
+#  (integer value)
+#live_migration_downtime_steps=10
+
+#
+# Time to wait, in seconds, between each step increase of the migration
+# downtime.
+#
+# Minimum delay is 10 seconds. Value is per GiB of guest RAM + disk to be
+# transferred, with lower bound of a minimum of 2 GiB per device.
+#  (integer value)
+#live_migration_downtime_delay=75
+
+#
+# Time to wait, in seconds, for migration to successfully complete transferring
+# data before aborting the operation.
+#
+# Value is per GiB of guest RAM + disk to be transferred, with lower bound of
+# a minimum of 2 GiB. Should usually be larger than downtime delay * downtime
+# steps. Set to 0 to disable timeouts.
+#
+# Related options:
+#
+# * live_migration_downtime
+# * live_migration_downtime_steps
+# * live_migration_downtime_delay
+#  (integer value)
+# Note: This option can be changed without restarting.
+#live_migration_completion_timeout=800
+
+# DEPRECATED:
+# Time to wait, in seconds, for migration to make forward progress in
+# transferring data before aborting the operation.
+#
+# Set to 0 to disable timeouts.
+#
+# This is deprecated, and now disabled by default because we have found serious
+# bugs in this feature that caused false live-migration timeout failures. This
+# feature will be removed or replaced in a future release.
+#  (integer value)
+# Note: This option can be changed without restarting.
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Serious bugs found in this feature.
+#live_migration_progress_timeout=0
+
+#
+# This option allows nova to switch an on-going live migration to post-copy
+# mode, i.e., switch the active VM to the one on the destination node before the
+# migration is complete, therefore ensuring an upper bound on the memory that
+# needs to be transferred. Post-copy requires libvirt>=1.3.3 and QEMU>=2.5.0.
+#
+# When permitted, post-copy mode will be automatically activated if a
+# live-migration memory copy iteration does not make percentage increase of at
+# least 10% over the last iteration.
+#
+# The live-migration force complete API also uses post-copy when permitted. If
+# post-copy mode is not available, force complete falls back to pausing the VM
+# to ensure the live-migration operation will complete.
+#
+# When using post-copy mode, if the source and destination hosts loose network
+# connectivity, the VM being live-migrated will need to be rebooted. For more
+# details, please see the Administration guide.
+#
+# Related options:
+#
+#     * live_migration_permit_auto_converge
+#  (boolean value)
+#live_migration_permit_post_copy=false
+
+#
+# This option allows nova to start live migration with auto converge on.
+#
+# Auto converge throttles down CPU if a progress of on-going live migration
+# is slow. Auto converge will only be used if this flag is set to True and
+# post copy is not permitted or post copy is unavailable due to the version
+# of libvirt and QEMU in use. Auto converge requires libvirt>=1.2.3 and
+# QEMU>=1.6.0.
+#
+# Related options:
+#
+#     * live_migration_permit_post_copy
+#  (boolean value)
+#live_migration_permit_auto_converge=false
+
+#
+# Determine the snapshot image format when sending to the image service.
+#
+# If set, this decides what format is used when sending the snapshot to the
+# image service.
+# If not set, defaults to same type as source image.
+#
+# Possible values:
+#
+# * ``raw``: RAW disk format
+# * ``qcow2``: KVM default disk format
+# * ``vmdk``: VMWare default disk format
+# * ``vdi``: VirtualBox default disk format
+# * If not set, defaults to same type as source image.
+#  (string value)
+# Allowed values: raw, qcow2, vmdk, vdi
+#snapshot_image_format=<None>
+
+#
+# Override the default disk prefix for the devices attached to an instance.
+#
+# If set, this is used to identify a free disk device name for a bus.
+#
+# Possible values:
+#
+# * Any prefix which will result in a valid disk device name like 'sda' or 'hda'
+#   for example. This is only necessary if the device names differ to the
+#   commonly known device name prefixes for a virtualization type such as: sd,
+#   xvd, uvd, vd.
+#
+# Related options:
+#
+# * ``virt_type``: Influences which device type is used, which determines
+#   the default disk prefix.
+#  (string value)
+#disk_prefix=<None>
+
+# Number of seconds to wait for instance to shut down after soft reboot request
+# is made. We fall back to hard reboot if instance does not shutdown within this
+# window. (integer value)
+#wait_soft_reboot_seconds=120
+
+#
+# Is used to set the CPU mode an instance should have.
+#
+# If virt_type="kvm|qemu", it will default to "host-model", otherwise it will
+# default to "none".
+#
+# Possible values:
+#
+# * ``host-model``: Clones the host CPU feature flags.
+# * ``host-passthrough``: Use the host CPU model exactly;
+# * ``custom``: Use a named CPU model;
+# * ``none``: Not set any CPU model.
+#
+# Related options:
+#
+# * ``cpu_model``: If ``custom`` is used for ``cpu_mode``, set this config
+#   option too, otherwise this would result in an error and the instance won't
+#   be launched.
+#  (string value)
+# Allowed values: host-model, host-passthrough, custom, none
+#cpu_mode=<None>
+
+#
+# Set the name of the libvirt CPU model the instance should use.
+#
+# Possible values:
+#
+# * The names listed in /usr/share/libvirt/cpu_map.xml
+#
+# Related options:
+#
+# * ``cpu_mode``: Don't set this when ``cpu_mode`` is NOT set to ``custom``.
+#   This would result in an error and the instance won't be launched.
+# * ``virt_type``: Only the virtualization types ``kvm`` and ``qemu`` use this.
+#  (string value)
+#cpu_model=<None>
+
+
+# Location where libvirt driver will store snapshots before uploading them to
+# image service (string value)
+#snapshots_directory=$instances_path/snapshots
+
+# Location where the Xen hvmloader is kept (string value)
+#xen_hvmloader_path=/usr/lib/xen/boot/hvmloader
+
+# Specific cachemodes to use for different disk types e.g:
+# file=directsync,block=none (list value)
+#disk_cachemodes =
+
+# A path to a device that will be used as source of entropy on the host.
+# Permitted options are: /dev/random or /dev/hwrng (string value)
+#rng_dev_path=<None>
+
+# For qemu or KVM guests, set this option to specify a default machine type per
+# host architecture. You can find a list of supported machine types in your
+# environment by checking the output of the "virsh capabilities"command. The
+# format of the value for this config option is host-arch=machine-type. For
+# example: x86_64=machinetype1,armv7l=machinetype2 (list value)
+#hw_machine_type=<None>
+
+# The data source used to the populate the host "serial" UUID exposed to guest
+# in the virtual BIOS. (string value)
+# Allowed values: none, os, hardware, auto
+#sysinfo_serial=auto
+
+# A number of seconds to memory usage statistics period. Zero or negative value
+# mean to disable memory usage statistics. (integer value)
+#mem_stats_period_seconds=10
+
+# List of uid targets and ranges.Syntax is guest-uid:host-uid:countMaximum of 5
+# allowed. (list value)
+#uid_maps =
+
+# List of guid targets and ranges.Syntax is guest-gid:host-gid:countMaximum of 5
+# allowed. (list value)
+#gid_maps =
+
+# In a realtime host context vCPUs for guest will run in that scheduling
+# priority. Priority depends on the host kernel (usually 1-99) (integer value)
+#realtime_scheduler_priority=1
+
+#
+# This is a performance event list which could be used as monitor. These events
+# will be passed to libvirt domain xml while creating a new instances.
+# Then event statistics data can be collected from libvirt.  The minimum
+# libvirt version is 2.0.0. For more information about `Performance monitoring
+# events`, refer https://libvirt.org/formatdomain.html#elementsPerf .
+#
+# Possible values:
+# * A string list. For example: ``enabled_perf_events = cmt, mbml, mbmt``
+#   The supported events list can be found in
+#   https://libvirt.org/html/libvirt-libvirt-domain.html ,
+#   which you may need to search key words ``VIR_PERF_PARAM_*``
+#  (list value)
+#enabled_perf_events =
+
+#
+# VM Images format.
+#
+# If default is specified, then use_cow_images flag is used instead of this
+# one.
+#
+# Related options:
+#
+# * virt.use_cow_images
+# * images_volume_group
+#  (string value)
+# Allowed values: raw, flat, qcow2, lvm, rbd, ploop, default
+#images_type=default
+
+#
+# LVM Volume Group that is used for VM images, when you specify images_type=lvm
+#
+# Related options:
+#
+# * images_type
+#  (string value)
+#images_volume_group=<None>
+
+#
+# Create sparse logical volumes (with virtualsize) if this flag is set to True.
+#  (boolean value)
+#sparse_logical_volumes=false
+
+# The RADOS pool in which rbd volumes are stored (string value)
+#images_rbd_pool=rbd
+
+# Path to the ceph configuration file to use (string value)
+#images_rbd_ceph_conf =
+
+#
+# Discard option for nova managed disks.
+#
+# Requires:
+#
+# * Libvirt >= 1.0.6
+# * Qemu >= 1.5 (raw format)
+# * Qemu >= 1.6 (qcow2 format)
+#  (string value)
+# Allowed values: ignore, unmap
+#hw_disk_discard=<None>
+
+# DEPRECATED: Allows image information files to be stored in non-standard
+# locations (string value)
+# This option is deprecated for removal since 14.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Image info files are no longer used by the image cache
+#image_info_filename_pattern=$instances_path/$image_cache_subdirectory_name/%(image)s.info
+
+# Unused resized base images younger than this will not be removed (integer
+# value)
+#remove_unused_resized_minimum_age_seconds=3600
+
+# DEPRECATED: Write a checksum for files in _base to disk (boolean value)
+# This option is deprecated for removal since 14.0.0.
+# Its value may be silently ignored in the future.
+# Reason: The image cache no longer periodically calculates checksums of stored
+# images. Data integrity can be checked at the block or filesystem level.
+#checksum_base_images=false
+
+# DEPRECATED: How frequently to checksum base images (integer value)
+# This option is deprecated for removal since 14.0.0.
+# Its value may be silently ignored in the future.
+# Reason: The image cache no longer periodically calculates checksums of stored
+# images. Data integrity can be checked at the block or filesystem level.
+#checksum_interval_seconds=3600
+
+#
+# Method used to wipe ephemeral disks when they are deleted. Only takes effect
+# if LVM is set as backing storage.
+#
+# Possible values:
+#
+# * none - do not wipe deleted volumes
+# * zero - overwrite volumes with zeroes
+# * shred - overwrite volume repeatedly
+#
+# Related options:
+#
+# * images_type - must be set to ``lvm``
+# * volume_clear_size
+#  (string value)
+# Allowed values: none, zero, shred
+#volume_clear=zero
+
+#
+# Size of area in MiB, counting from the beginning of the allocated volume,
+# that will be cleared using method set in ``volume_clear`` option.
+#
+# Possible values:
+#
+# * 0 - clear whole volume
+# * >0 - clear specified amount of MiB
+#
+# Related options:
+#
+# * images_type - must be set to ``lvm``
+# * volume_clear - must be set and the value must be different than ``none``
+#   for this option to have any impact
+#  (integer value)
+# Minimum value: 0
+#volume_clear_size=0
+
+#
+# Enable snapshot compression for ``qcow2`` images.
+#
+# Note: you can set ``snapshot_image_format`` to ``qcow2`` to force all
+# snapshots to be in ``qcow2`` format, independently from their original image
+# type.
+#
+# Related options:
+#
+# * snapshot_image_format
+#  (boolean value)
+#snapshot_compression=false
+
+# Use virtio for bridge interfaces with KVM/QEMU (boolean value)
+#use_virtio_for_bridges=true
+
+#
+# Protocols listed here will be accessed directly from QEMU.
+#
+# If gluster is present in qemu_allowed_storage_drivers, glusterfs's backend
+# will
+# pass a disk configuration to QEMU. This allows QEMU to access the volume using
+# libgfapi rather than mounting GlusterFS via fuse.
+#
+# Possible values:
+#
+# * [gluster]
+#  (list value)
+#qemu_allowed_storage_drivers =
+
+#
+# Use multipath connection of the iSCSI or FC volume
+#
+# Volumes can be connected in the LibVirt as multipath devices. This will
+# provide high availability and fault tolerance.
+#  (boolean value)
+# Deprecated group/name - [libvirt]/iscsi_use_multipath
+#volume_use_multipath=false
+
+#
+# Number of times to rediscover AoE target to find volume.
+#
+# Nova provides support for block storage attaching to hosts via AOE (ATA over
+# Ethernet). This option allows the user to specify the maximum number of retry
+# attempts that can be made to discover the AoE device.
+#  (integer value)
+#num_aoe_discover_tries=3
+
+#
+# Absolute path to the directory where the glusterfs volume is mounted on the
+# compute node.
+#  (string value)
+#glusterfs_mount_point_base=$state_path/mnt
+
+#
+# Number of times to scan iSCSI target to find volume.
+#  (integer value)
+#num_iscsi_scan_tries=5
+
+#
+# The iSCSI transport iface to use to connect to target in case offload support
+# is desired.
+#
+# Default format is of the form <transport_name>.<hwaddress> where
+# <transport_name> is one of (be2iscsi, bnx2i, cxgb3i, cxgb4i, qla4xxx, ocs) and
+# <hwaddress> is the MAC address of the interface and can be generated via the
+# iscsiadm -m iface command. Do not confuse the iscsi_iface parameter to be
+# provided here with the actual transport name.
+#  (string value)
+# Deprecated group/name - [libvirt]/iscsi_transport
+#iscsi_iface=<None>
+
+#
+# Number of times to scan iSER target to find volume.
+#
+# iSER is a server network protocol that extends iSCSI protocol to use Remote
+# Direct Memory Access (RDMA). This option allows the user to specify the
+# maximum
+# number of scan attempts that can be made to find iSER volume.
+#  (integer value)
+#num_iser_scan_tries=5
+
+#
+# Use multipath connection of the iSER volume.
+#
+# iSER volumes can be connected as multipath devices. This will provide high
+# availability and fault tolerance.
+#  (boolean value)
+#iser_use_multipath=false
+
+#
+# The RADOS client name for accessing rbd(RADOS Block Devices) volumes.
+#
+# Libvirt will refer to this user when connecting and authenticating with
+# the Ceph RBD server.
+#  (string value)
+#rbd_user=<None>
+
+#
+# The libvirt UUID of the secret for the rbd_user volumes.
+#  (string value)
+#rbd_secret_uuid=<None>
+
+#
+# Directory where the NFS volume is mounted on the compute node.
+# The default is 'mnt' directory of the location where nova's Python module
+# is installed.
+#
+# NFS provides shared storage for the OpenStack Block Storage service.
+#
+# Possible values:
+#
+# * A string representing absolute path of mount point.
+#  (string value)
+#nfs_mount_point_base=$state_path/mnt
+
+#
+# Mount options passed to the NFS client. See section of the nfs man page
+# for details.
+#
+# Mount options controls the way the filesystem is mounted and how the
+# NFS client behaves when accessing files on this mount point.
+#
+# Possible values:
+#
+# * Any string representing mount options separated by commas.
+# * Example string: vers=3,lookupcache=pos
+#  (string value)
+
+#
+# Directory where the Quobyte volume is mounted on the compute node.
+#
+# Nova supports Quobyte volume driver that enables storing Block Storage
+# service volumes on a Quobyte storage back end. This Option sepcifies the
+# path of the directory where Quobyte volume is mounted.
+#
+# Possible values:
+#
+# * A string representing absolute path of mount point.
+#  (string value)
+#quobyte_mount_point_base=$state_path/mnt
+
+# Path to a Quobyte Client configuration file. (string value)
+#quobyte_client_cfg=<None>
+
+#
+# Path or URL to Scality SOFS(Scale-Out File Server) configuration file.
+#
+# The Scality SOFS provides OpenStack users the option of storing their
+# data on a high capacity, replicated, highly available Scality Ring object
+# storage cluster.
+#  (string value)
+#scality_sofs_config=<None>
+
+#
+# Base dir where Scality SOFS shall be mounted.
+#
+# The Scality volume driver in Nova mounts SOFS and lets the hypervisor access
+# the volumes.
+#
+# Possible values:
+#
+# * $state_path/scality where state_path is a config option that specifies
+#   the top-level directory for maintaining nova's state or Any string
+#   containing the full directory path.
+#  (string value)
+#scality_sofs_mount_point=$state_path/scality
+
+#
+# Directory where the SMBFS shares are mounted on the compute node.
+#  (string value)
+#smbfs_mount_point_base=$state_path/mnt
+
+#
+# Mount options passed to the SMBFS client.
+#
+# Provide SMBFS options as a single string containing all parameters.
+# See mount.cifs man page for  details. Note that the libvirt-qemu ``uid``
+# and ``gid`` must be specified.
+#  (string value)
+#smbfs_mount_options =
+
+#
+# libvirt's transport method for remote file operations.
+#
+# Because libvirt cannot use RPC to copy files over network to/from other
+# compute nodes, other method must be used for:
+#
+# * creating directory on remote host
+# * creating file on remote host
+# * removing file from remote host
+# * copying file to remote host
+#  (string value)
+# Allowed values: ssh, rsync
+#remote_filesystem_transport=ssh
+
+#
+# Directory where the Virtuozzo Storage clusters are mounted on the compute
+# node.
+#
+# This option defines non-standard mountpoint for Vzstorage cluster.
+#
+# Related options:
+#
+# * vzstorage_mount_* group of parameters
+#  (string value)
+#vzstorage_mount_point_base=$state_path/mnt
+
+#
+# Mount owner user name.
+#
+# This option defines the owner user of Vzstorage cluster mountpoint.
+#
+# Related options:
+#
+# * vzstorage_mount_* group of parameters
+#  (string value)
+#vzstorage_mount_user=stack
+
+#
+# Mount owner group name.
+#
+# This option defines the owner group of Vzstorage cluster mountpoint.
+#
+# Related options:
+#
+# * vzstorage_mount_* group of parameters
+#  (string value)
+#vzstorage_mount_group=qemu
+
+#
+# Mount access mode.
+#
+# This option defines the access bits of Vzstorage cluster mountpoint,
+# in the format similar to one of chmod(1) utility, like this: 0770.
+# It consists of one to four digits ranging from 0 to 7, with missing
+# lead digits assumed to be 0's.
+#
+# Related options:
+#
+# * vzstorage_mount_* group of parameters
+#  (string value)
+#vzstorage_mount_perms=0770
+
+#
+# Path to vzstorage client log.
+#
+# This option defines the log of cluster operations,
+# it should include "%(cluster_name)s" template to separate
+# logs from multiple shares.
+#
+# Related options:
+#
+# * vzstorage_mount_opts may include more detailed logging options.
+#  (string value)
+#vzstorage_log_path=/var/log/pstorage/%(cluster_name)s/nova.log.gz
+
+#
+# Path to the SSD cache file.
+#
+# You can attach an SSD drive to a client and configure the drive to store
+# a local cache of frequently accessed data. By having a local cache on a
+# client's SSD drive, you can increase the overall cluster performance by
+# up to 10 and more times.
+# WARNING! There is a lot of SSD models which are not server grade and
+# may loose arbitrary set of data changes on power loss.
+# Such SSDs should not be used in Vstorage and are dangerous as may lead
+# to data corruptions and inconsistencies. Please consult with the manual
+# on which SSD models are known to be safe or verify it using
+# vstorage-hwflush-check(1) utility.
+#
+# This option defines the path which should include "%(cluster_name)s"
+# template to separate caches from multiple shares.
+#
+# Related options:
+#
+# * vzstorage_mount_opts may include more detailed cache options.
+#  (string value)
+#vzstorage_cache_path=<None>
+
+#
+# Extra mount options for pstorage-mount
+#
+# For full description of them, see
+# https://static.openvz.org/vz-man/man1/pstorage-mount.1.gz.html
+# Format is a python string representation of arguments list, like:
+# "['-v', '-R', '500']"
+# Shouldn't include -c, -l, -C, -u, -g and -m as those have
+# explicit vzstorage_* options.
+#
+# Related options:
+#
+# * All other vzstorage_* options
+#  (list value)
+#vzstorage_mount_opts =
 
 
 [matchmaker_redis]
@@ -705,7 +6720,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
+#host=127.0.0.1
 
 # DEPRECATED: Use this port to connect to redis host. (port value)
 # Minimum value: 0
@@ -713,7 +6728,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
+#port=6379
 
 # DEPRECATED: Password for Redis server (optional). (string value)
 # This option is deprecated for removal.
@@ -729,16 +6744,485 @@
 #sentinel_hosts =
 
 # Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
+#sentinel_group_name=oslo-messaging-zeromq
 
 # Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
+#wait_timeout=2000
 
 # Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
+#check_timeout=20000
 
 # Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
+#socket_timeout=10000
+
+
+[metrics]
+#
+# Configuration options for metrics
+#
+# Options under this group allow to adjust how values assigned to metrics are
+# calculated.
+
+#
+# From nova.conf
+#
+
+#
+# When using metrics to weight the suitability of a host, you can use this
+# option
+# to change how the calculated weight influences the weight assigned to a host
+# as
+# follows:
+#
+# * >1.0: increases the effect of the metric on overall weight
+# * 1.0: no change to the calculated weight
+# * >0.0,<1.0: reduces the effect of the metric on overall weight
+# * 0.0: the metric value is ignored, and the value of the
+#   'weight_of_unavailable' option is returned instead
+# * >-1.0,<0.0: the effect is reduced and reversed
+# * -1.0: the effect is reversed
+# * <-1.0: the effect is increased proportionally and reversed
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect.
+#
+# Possible values:
+#
+# * An integer or float value, where the value corresponds to the multipler
+#   ratio for this weigher.
+#
+# Related options:
+#
+# * weight_of_unavailable
+#  (floating point value)
+#weight_multiplier=1.0
+
+#
+# This setting specifies the metrics to be weighed and the relative ratios for
+# each metric. This should be a single string value, consisting of a series of
+# one or more 'name=ratio' pairs, separated by commas, where 'name' is the name
+# of the metric to be weighed, and 'ratio' is the relative weight for that
+# metric.
+#
+# Note that if the ratio is set to 0, the metric value is ignored, and instead
+# the weight will be set to the value of the 'weight_of_unavailable' option.
+#
+# As an example, let's consider the case where this option is set to:
+#
+#     ``name1=1.0, name2=-1.3``
+#
+# The final weight will be:
+#
+#     ``(name1.value * 1.0) + (name2.value * -1.3)``
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect.
+#
+# Possible values:
+#
+# * A list of zero or more key/value pairs separated by commas, where the key is
+#   a string representing the name of a metric and the value is a numeric weight
+#   for that metric. If any value is set to 0, the value is ignored and the
+#   weight will be set to the value of the 'weight_of_unavailable' option.
+#
+# Related options:
+#
+# * weight_of_unavailable
+#  (list value)
+#weight_setting =
+
+#
+# This setting determines how any unavailable metrics are treated. If this
+# option
+# is set to True, any hosts for which a metric is unavailable will raise an
+# exception, so it is recommended to also use the MetricFilter to filter out
+# those hosts before weighing.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect.
+#
+# Possible values:
+#
+# * True or False, where False ensures any metric being unavailable for a host
+#   will set the host weight to 'weight_of_unavailable'.
+#
+# Related options:
+#
+# * weight_of_unavailable
+#  (boolean value)
+#required=true
+
+#
+# When any of the following conditions are met, this value will be used in place
+# of any actual metric value:
+#
+# * One of the metrics named in 'weight_setting' is not available for a host,
+#   and the value of 'required' is False
+# * The ratio specified for a metric in 'weight_setting' is 0
+# * The 'weight_multiplier' option is set to 0
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect.
+#
+# Possible values:
+#
+# * An integer or float value, where the value corresponds to the multipler
+#   ratio for this weigher.
+#
+# Related options:
+#
+# * weight_setting
+# * required
+# * weight_multiplier
+#  (floating point value)
+#weight_of_unavailable=-10000.0
+
+
+[mks]
+#
+# Nova compute node uses WebMKS, a desktop sharing protocol to provide
+# instance console access to VM's created by VMware hypervisors.
+#
+# Related options:
+# Following options must be set to provide console access.
+# * mksproxy_base_url
+# * enabled
+
+#
+# From nova.conf
+#
+
+#
+# Location of MKS web console proxy
+#
+# The URL in the response points to a WebMKS proxy which
+# starts proxying between client and corresponding vCenter
+# server where instance runs. In order to use the web based
+# console access, WebMKS proxy should be installed and configured
+#
+# Possible values:
+#
+# * Must be a valid URL of the form:``http://host:port/``
+#  (string value)
+#mksproxy_base_url=http://127.0.0.1:6090/
+
+#
+# Enables graphical console access for virtual machines.
+#  (boolean value)
+#enabled=false
+
+
+[neutron]
+#
+# Configuration options for neutron (network connectivity as a service).
+
+#
+# From nova.conf
+#
+username=neutron
+password=opnfv_secret
+project_name=service
+auth_url = http://192.168.10.35:35357/v3
+url=http://192.168.10.35:9696
+region_name= RegionOne
+extension_sync_interval=600
+auth_type = v3password
+project_domain_name = Default
+user_domain_name = Default
+timeout=30
+#
+# This option specifies the URL for connecting to Neutron.
+#
+# Possible values:
+#
+# * Any valid URL that points to the Neutron API service is appropriate here.
+#   This typically matches the URL returned for the 'network' service type
+#   from the Keystone service catalog.
+#  (uri value)
+#url=http://127.0.0.1:9696
+
+#
+# Region name for connecting to Neutron in admin context.
+#
+# This option is used in multi-region setups. If there are two Neutron
+# servers running in two regions in two different machines, then two
+# services need to be created in Keystone with two different regions and
+# associate corresponding endpoints to those services. When requests are made
+# to Keystone, the Keystone service uses the region_name to determine the
+# region the request is coming from.
+#  (string value)
+#region_name=RegionOne
+
+#
+# Specifies the name of an integration bridge interface used by OpenvSwitch.
+# This option is used only if Neutron does not specify the OVS bridge name.
+#
+# Possible values:
+#
+# * Any string representing OVS bridge name.
+#  (string value)
+#ovs_bridge=br-int
+
+#
+# Integer value representing the number of seconds to wait before querying
+# Neutron for extensions.  After this number of seconds the next time Nova
+# needs to create a resource in Neutron it will requery Neutron for the
+# extensions that it has loaded.  Setting value to 0 will refresh the
+# extensions with no wait.
+#  (integer value)
+# Minimum value: 0
+#extension_sync_interval=600
+
+#
+# When set to True, this option indicates that Neutron will be used to proxy
+# metadata requests and resolve instance ids. Otherwise, the instance ID must be
+# passed to the metadata request in the 'X-Instance-ID' header.
+#
+# Related options:
+#
+# * metadata_proxy_shared_secret
+#  (boolean value)
+#service_metadata_proxy=false
+
+#
+# This option holds the shared secret string used to validate proxy requests to
+# Neutron metadata requests. In order to be used, the
+# 'X-Metadata-Provider-Signature' header must be supplied in the request.
+#
+# Related options:
+#
+# * service_metadata_proxy
+#  (string value)
+#metadata_proxy_shared_secret =
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile=<None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile=<None>
+
+# PEM encoded client certificate key file (string value)
+#keyfile=<None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure=false
+
+# Timeout value for http requests (integer value)
+#timeout=<None>
+timeout = 300
+
+# Authentication type to load (string value)
+# Deprecated group/name - [neutron]/auth_plugin
+#auth_type=<None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section=<None>
+
+# Authentication URL (string value)
+#auth_url=<None>
+
+# Domain ID to scope to (string value)
+#domain_id=<None>
+
+# Domain name to scope to (string value)
+#domain_name=<None>
+
+# Project ID to scope to (string value)
+#project_id=<None>
+
+# Project name to scope to (string value)
+#project_name=<None>
+
+# Domain ID containing project (string value)
+#project_domain_id=<None>
+
+# Domain name containing project (string value)
+#project_domain_name=<None>
+
+# Trust ID (string value)
+#trust_id=<None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id=<None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name=<None>
+
+# User ID (string value)
+#user_id=<None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user-name
+#username=<None>
+
+# User's domain id (string value)
+#user_domain_id=<None>
+
+# User's domain name (string value)
+#user_domain_name=<None>
+
+# User's password (string value)
+#password=<None>
+
+# Tenant ID (string value)
+#tenant_id=<None>
+
+# Tenant Name (string value)
+#tenant_name=<None>
+
+
+[notifications]
+#
+# Most of the actions in Nova which manipulate the system state generate
+# notifications which are posted to the messaging component (e.g. RabbitMQ) and
+# can be consumed by any service outside the Openstack. More technical details
+# at http://docs.openstack.org/developer/nova/notifications.html
+
+#
+# From nova.conf
+#
+
+#
+# If set, send compute.instance.update notifications on instance state
+# changes.
+#
+# Please refer to https://wiki.openstack.org/wiki/SystemUsageData for
+# additional information on notifications.
+#
+# Possible values:
+#
+# * None - no notifications
+# * "vm_state" - notifications on VM state changes
+# * "vm_and_task_state" - notifications on VM and task state changes
+#  (string value)
+# Allowed values: <None>, vm_state, vm_and_task_state
+# Deprecated group/name - [DEFAULT]/notify_on_state_change
+#notify_on_state_change=<None>
+notify_on_state_change = vm_and_task_state
+
+#
+# If enabled, send api.fault notifications on caught exceptions in the
+# API service.
+#  (boolean value)
+# Deprecated group/name - [DEFAULT]/notify_api_faults
+#notify_on_api_faults=false
+notify_on_api_faults=false
+
+# Default notification level for outgoing notifications. (string value)
+# Allowed values: DEBUG, INFO, WARN, ERROR, CRITICAL
+# Deprecated group/name - [DEFAULT]/default_notification_level
+#default_level=INFO
+
+#
+# Default publisher_id for outgoing notifications. If you consider routing
+# notifications using different publisher, change this value accordingly.
+#
+# Possible values:
+#
+# * Defaults to the IPv4 address of this host, but it can be any valid
+#   oslo.messaging publisher_id
+#
+# Related options:
+#
+# *  my_ip - IP address of this host
+#  (string value)
+# Deprecated group/name - [DEFAULT]/default_publisher_id
+#default_publisher_id=$my_ip
+
+#
+# Specifies which notification format shall be used by nova.
+#
+# The default value is fine for most deployments and rarely needs to be changed.
+# This value can be set to 'versioned' once the infrastructure moves closer to
+# consuming the newer format of notifications. After this occurs, this option
+# will be removed (possibly in the "P" release).
+#
+# Possible values:
+# * unversioned: Only the legacy unversioned notifications are emitted.
+# * versioned: Only the new versioned notifications are emitted.
+# * both: Both the legacy unversioned and the new versioned notifications are
+#   emitted. (Default)
+#
+# The list of versioned notifications is visible in
+# http://docs.openstack.org/developer/nova/notifications.html
+#  (string value)
+# Allowed values: unversioned, versioned, both
+# Deprecated group/name - [DEFAULT]/notification_format
+#notification_format=both
+
+
+[osapi_v21]
+
+#
+# From nova.conf
+#
+
+# DEPRECATED:
+# This option is a list of all of the v2.1 API extensions to never load.
+#
+# Possible values:
+#
+# * A list of strings, each being the alias of an extension that you do not
+#   wish to load.
+#
+# Related options:
+#
+# * enabled
+# * extensions_whitelist
+#  (list value)
+# This option is deprecated for removal since 12.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# API extensions are now part of the standard API. API extensions should be
+# disabled using policy, rather than via these configuration options.
+#extensions_blacklist =
+
+# DEPRECATED:
+# This is a list of extensions. If it is empty, then *all* extensions except
+# those specified in the extensions_blacklist option will be loaded. If it is
+# not
+# empty, then only those extensions in this list will be loaded, provided that
+# they are also not in the extensions_blacklist option.
+#
+# Possible values:
+#
+# * A list of strings, each being the alias of an extension that you wish to
+#   load, or an empty list, which indicates that all extensions are to be run.
+#
+# Related options:
+#
+# * enabled
+# * extensions_blacklist
+#  (list value)
+# This option is deprecated for removal since 12.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# API extensions are now part of the standard API. API extensions should be
+# disabled using policy, rather than via these configuration options.
+#extensions_whitelist =
+
+# DEPRECATED:
+# This option is a string representing a regular expression (regex) that matches
+# the project_id as contained in URLs. If not set, it will match normal UUIDs
+# created by keystone.
+#
+# Possible values:
+#
+# * A string representing any legal regular expression
+#  (string value)
+# This option is deprecated for removal since 13.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# Recent versions of nova constrain project IDs to hexadecimal characters and
+# dashes. If your installation uses IDs outside of this range, you should use
+# this option to provide your own regex and give you time to migrate offending
+# projects to valid IDs before the next release.
+#project_id_regex=<None>
 
 
 [oslo_concurrency]
@@ -748,14 +7232,16 @@
 #
 
 # Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
+# Deprecated group/name - [DEFAULT]/disable_process_locking
+#disable_process_locking=false
 
 # Directory to use for lock files.  For security, the specified directory should
 # only be writable by the user running the processes that need locking. Defaults
 # to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set in the
 # environment, use the Python tempfile.gettempdir function to find a suitable
 # location. If external locks are used, a lock path must be set. (string value)
-#lock_path = /tmp
+# Deprecated group/name - [DEFAULT]/lock_path
+lock_path = /var/lib/nova/tmp
 
 
 [oslo_messaging_amqp]
@@ -766,112 +7252,103 @@
 
 # Name for the AMQP container. must be globally unique. Defaults to a generated
 # UUID (string value)
-#container_name = <None>
+# Deprecated group/name - [amqp1]/container_name
+#container_name=<None>
 
 # Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout=0
 
 # Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
+# Deprecated group/name - [amqp1]/trace
+#trace=false
 
 # CA certificate PEM file used to verify the server's certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
 #ssl_ca_file =
 
 # Self-identifying certificate PEM file for client authentication (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
 #ssl_cert_file =
 
 # Private key PEM file used to sign ssl_cert_file certificate (optional) (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_key_file
 #ssl_key_file =
 
 # Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password=<None>
 
 # DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
+#allow_insecure_clients=false
 
 # Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
 #sasl_mechanisms =
 
 # Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
 #sasl_config_dir =
 
 # Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
 #sasl_config_name =
 
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
 #username =
 
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
 #password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
 # Minimum value: 1
-#connection_retry_interval = 1
+#connection_retry_interval=1
 
 # Increase the connection_retry_interval by this many seconds after each
 # unsuccessful failover attempt. (integer value)
 # Minimum value: 0
-#connection_retry_backoff = 2
+#connection_retry_backoff=2
 
 # Maximum limit for connection_retry_interval + connection_retry_backoff
 # (integer value)
 # Minimum value: 1
-#connection_retry_interval_max = 30
+#connection_retry_interval_max=30
 
 # Time to pause between re-connecting an AMQP 1.0 link that failed due to a
 # recoverable error. (integer value)
 # Minimum value: 1
-#link_retry_delay = 10
+#link_retry_delay=10
 
 # The maximum number of attempts to re-send a reply message which failed due to
 # a recoverable error. (integer value)
 # Minimum value: -1
-#default_reply_retry = 0
+#default_reply_retry=0
 
 # The deadline for an rpc reply message delivery. (integer value)
 # Minimum value: 5
-#default_reply_timeout = 30
+#default_reply_timeout=30
 
 # The deadline for an rpc cast or call message delivery. Only used when caller
 # does not provide a timeout expiry. (integer value)
 # Minimum value: 5
-#default_send_timeout = 30
+#default_send_timeout=30
 
 # The deadline for a sent notification message delivery. Only used when caller
 # does not provide a timeout expiry. (integer value)
 # Minimum value: 5
-#default_notify_timeout = 30
+#default_notify_timeout=30
 
 # The duration to schedule a purge of idle sender links. Detach link after
 # expiry. (integer value)
 # Minimum value: 1
-#default_sender_link_timeout = 600
+#default_sender_link_timeout=600
 
 # Indicates the addressing mode used by the driver.
 # Permitted values:
@@ -879,44 +7356,39 @@
 # 'routable' - use routable addresses
 # 'dynamic'  - use legacy addresses if the message bus does not support routing
 # otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
+#addressing_mode=dynamic
 
 # address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix=exclusive
 
 # address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix=broadcast
 
 # address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix=unicast
 
 # Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
+#rpc_address_prefix=openstack.org/om/rpc
 
 # Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
+#notify_address_prefix=openstack.org/om/notify
 
 # Appended to the address prefix when sending a fanout message. Used by the
 # message bus to identify fanout messages. (string value)
-#multicast_address = multicast
+#multicast_address=multicast
 
 # Appended to the address prefix when sending to a particular RPC/Notification
 # server. Used by the message bus to identify messages sent to a single
 # destination. (string value)
-#unicast_address = unicast
+#unicast_address=unicast
 
 # Appended to the address prefix when sending to a group of consumers. Used by
 # the message bus to identify messages that should be delivered in a round-robin
 # fashion across consumers. (string value)
-#anycast_address = anycast
+#anycast_address=anycast
 
 # Exchange name used in notification addresses.
 # Exchange name resolution precedence:
@@ -924,7 +7396,7 @@
 # else default_notification_exchange if set
 # else control_exchange if set
 # else 'notify' (string value)
-#default_notification_exchange = <None>
+#default_notification_exchange=<None>
 
 # Exchange name used in RPC addresses.
 # Exchange name resolution precedence:
@@ -932,19 +7404,19 @@
 # else default_rpc_exchange if set
 # else control_exchange if set
 # else 'rpc' (string value)
-#default_rpc_exchange = <None>
+#default_rpc_exchange=<None>
 
 # Window size for incoming RPC Reply messages. (integer value)
 # Minimum value: 1
-#reply_link_credit = 200
+#reply_link_credit=200
 
 # Window size for incoming RPC Request messages (integer value)
 # Minimum value: 1
-#rpc_server_credit = 100
+#rpc_server_credit=100
 
 # Window size for incoming Notification messages (integer value)
 # Minimum value: 1
-#notify_server_credit = 100
+#notify_server_credit=100
 
 # Send messages of this type pre-settled.
 # Pre-settled messages will not receive acknowledgement
@@ -956,8 +7428,8 @@
 # 'rpc-cast' - Send RPC Casts pre-settled
 # 'notify'   - Send Notifications pre-settled
 #  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
+#pre_settled=rpc-cast
+#pre_settled=rpc-reply
 
 
 [oslo_messaging_kafka]
@@ -970,7 +7442,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
+#kafka_default_host=localhost
 
 # DEPRECATED: Default Kafka broker Port (port value)
 # Minimum value: 0
@@ -978,33 +7450,33 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
+#kafka_default_port=9092
 
 # Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
+#kafka_max_fetch_bytes=1048576
+
+# Default timeout(s) for Kafka consumers (integer value)
+#kafka_consumer_timeout=1.0
 
 # Pool Size for Kafka Consumers (integer value)
-#pool_size = 10
+#pool_size=10
 
 # The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
+#conn_pool_min_size=2
 
 # The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
+#conn_pool_ttl=1200
 
 # Group id for Kafka consumer. Consumers in one group will coordinate message
 # consumption (string value)
-#consumer_group = oslo_messaging_consumer
+#consumer_group=oslo_messaging_consumer
 
 # Upper bound on the delay for KafkaProducer batching in seconds (floating point
 # value)
-#producer_batch_timeout = 0.0
+#producer_batch_timeout=0.0
 
 # Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
+#producer_batch_size=16384
 
 
 [oslo_messaging_notifications]
@@ -1012,6 +7484,7 @@
 #
 # From oslo.messaging
 #
+driver = messagingv2
 
 # The Drivers(s) to handle sending notifications. Possible values are messaging,
 # messagingv2, routing, log, test, noop (multi valued)
@@ -1021,17 +7494,12 @@
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
 # Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
+#transport_url=<None>
 
 # AMQP topic used for OpenStack notifications. (list value)
 # Deprecated group/name - [rpc_notifier2]/topics
 # Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
+#topics=notifications
 
 
 [oslo_messaging_rabbit]
@@ -1043,110 +7511,122 @@
 # Use durable queues in AMQP. (boolean value)
 # Deprecated group/name - [DEFAULT]/amqp_durable_queues
 # Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
+#amqp_durable_queues=false
 
 # Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete=false
 
 # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
 # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
 # distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
 
 # SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
 
 # SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
 
 # SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
-#kombu_reconnect_delay = 1.0
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay=1.0
 
 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
 # be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
+#kombu_compression=<None>
 
 # How long to wait a missing client before abandoning to send it its replies.
 # This value should not be longer than rpc_response_timeout. (integer value)
 # Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
+#kombu_missing_consumer_retry_timeout=60
 
 # Determines how the next RabbitMQ node is chosen in case the one we are
 # currently connected to becomes unavailable. Takes effect only if more than one
 # RabbitMQ node is provided in config. (string value)
 # Allowed values: round-robin, shuffle
-#kombu_failover_strategy = round-robin
+#kombu_failover_strategy=round-robin
 
 # DEPRECATED: The RabbitMQ broker address where a single node is used. (string
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
+#rabbit_host=localhost
 
 # DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
+#rabbit_port=5672
 
 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
+#rabbit_hosts=$rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl=false
 
 # DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
+#rabbit_userid=guest
 
 # DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
+#rabbit_password=guest
 
 # The RabbitMQ login method. (string value)
 # Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
-#rabbit_login_method = AMQPLAIN
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method=AMQPLAIN
 
 # DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
+#rabbit_virtual_host=/
 
 # How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
+#rabbit_retry_interval=1
 
 # How long to backoff for between retries when connecting to RabbitMQ. (integer
 # value)
-#rabbit_retry_backoff = 2
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff=2
 
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
 # (integer value)
-#rabbit_interval_max = 30
+#rabbit_interval_max=30
 
 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
 # (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
+#rabbit_max_retries=0
 
 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
 # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
@@ -1154,131 +7634,138 @@
 # you just want to make sure that all queues (except those with auto-generated
 # names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
 # '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues=false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
 # Queues which are unused for the duration of the TTL are automatically deleted.
 # The parameter affects only reply and fanout queues. (integer value)
 # Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
+#rabbit_transient_queues_ttl=1800
 
 # Specifies the number of messages to prefetch. Setting to zero allows unlimited
 # messages. (integer value)
-#rabbit_qos_prefetch_count = 64
+#rabbit_qos_prefetch_count=0
 
 # Number of seconds after which the Rabbit broker is considered down if
 # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
 # value)
-#heartbeat_timeout_threshold = 60
+#heartbeat_timeout_threshold=60
 
 # How often times during the heartbeat_timeout_threshold we check the heartbeat.
 # (integer value)
-#heartbeat_rate = 2
+#heartbeat_rate=2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit=false
 
 # Maximum number of channels to allow (integer value)
-#channel_max = <None>
+#channel_max=<None>
 
 # The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
+#frame_max=<None>
 
 # How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
+#heartbeat_interval=3
+
+# Enable SSL (boolean value)
+#ssl=<None>
 
 # Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
+#ssl_options=<None>
 
 # Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
+#socket_timeout=0.25
 
 # Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point value)
-#tcp_user_timeout = 0.25
+#tcp_user_timeout=0.25
 
 # Set delay for reconnection to some host which has connection error (floating
 # point value)
-#host_connection_reconnect_delay = 0.25
+#host_connection_reconnect_delay=0.25
 
 # Connection factory implementation (string value)
 # Allowed values: new, single, read_write
-#connection_factory = single
+#connection_factory=single
 
 # Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
+#pool_max_size=30
 
 # Maximum number of connections to create above `pool_max_size`. (integer value)
-#pool_max_overflow = 0
+#pool_max_overflow=0
 
 # Default number of seconds to wait for a connections to available (integer
 # value)
-#pool_timeout = 30
+#pool_timeout=30
 
 # Lifetime of a connection (since creation) in seconds or None for no recycling.
 # Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
+#pool_recycle=600
 
 # Threshold at which inactive (since release) connections are considered stale
 # in seconds or None for no staleness. Stale connections are closed on acquire.
 # (integer value)
-#pool_stale = 60
+#pool_stale=60
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
-#default_serializer_type = json
+#default_serializer_type=json
 
 # Persist notification messages. (boolean value)
-#notification_persistence = false
+#notification_persistence=false
 
 # Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
+#default_notification_exchange=${control_exchange}_notification
 
 # Max number of not acknowledged message which RabbitMQ can send to notification
 # listener. (integer value)
-#notification_listener_prefetch_count = 100
+#notification_listener_prefetch_count=100
 
 # Reconnecting retry count in case of connectivity problem during sending
 # notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
+#default_notification_retry_attempts=-1
 
 # Reconnecting retry delay in case of connectivity problem during sending
 # notification message (floating point value)
-#notification_retry_delay = 0.25
+#notification_retry_delay=0.25
 
 # Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
+#rpc_queue_expiration=60
 
 # Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
+#default_rpc_exchange=${control_exchange}_rpc
 
 # Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
+#rpc_reply_exchange=${control_exchange}_rpc_reply
 
 # Max number of not acknowledged message which RabbitMQ can send to rpc
 # listener. (integer value)
-#rpc_listener_prefetch_count = 100
+#rpc_listener_prefetch_count=100
 
 # Max number of not acknowledged message which RabbitMQ can send to rpc reply
 # listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
+#rpc_reply_listener_prefetch_count=100
 
 # Reconnecting retry count in case of connectivity problem during sending reply.
 # -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
+#rpc_reply_retry_attempts=-1
 
 # Reconnecting retry delay in case of connectivity problem during sending reply.
 # (floating point value)
-#rpc_reply_retry_delay = 0.25
+#rpc_reply_retry_delay=0.25
 
 # Reconnecting retry count in case of connectivity problem during sending RPC
 # message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
 # request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
+#default_rpc_retry_attempts=-1
 
 # Reconnecting retry delay in case of connectivity problem during sending RPC
 # message (floating point value)
-#rpc_retry_delay = 0.25
+#rpc_retry_delay=0.25
+
+
 
 
 [oslo_messaging_zmq]
@@ -1289,25 +7776,31 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address=*
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker=redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts=1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog=<None>
 
 # Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir=/var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host=localhost
 
 # Number of seconds to wait before all pending messages will be sent after
 # closing a socket. The default value of -1 specifies an infinite linger period.
@@ -1315,110 +7808,119 @@
 # immediately when the socket is closed. Positive values specify an upper bound
 # for the linger period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
+#zmq_linger=-1
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout=1
 
 # Expiration timeout in seconds of a name service record about existing target (
 # < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire=300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
-#zmq_target_update = 180
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update=180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
-#use_pub_sub = false
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub=false
 
 # Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy=false
 
 # This option makes direct connections dynamic or static. It makes sense only
 # with use_router_proxy=False which means to use direct connections for direct
 # message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
+#use_dynamic_connections=false
 
 # How many additional connections to a host will be made for failover reasons.
 # This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
+#zmq_failover_connections=2
 
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#rpc_zmq_min_port = 49153
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port=49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
-#rpc_zmq_max_port = 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port=65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
-#rpc_zmq_bind_port_retries = 100
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries=100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
-#rpc_zmq_serialization = json
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization=json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
 # a queue when server side disconnects. False means to keep queue and messages
 # even if server is disconnected, when the server appears we send all
 # accumulated messages to it. (boolean value)
-#zmq_immediate = true
+#zmq_immediate=true
 
 # Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
 # other negative value) means to skip any overrides and leave it to OS default;
 # 0 and 1 (or any other positive value) mean to disable and enable the option
 # respectively. (integer value)
-#zmq_tcp_keepalive = -1
+#zmq_tcp_keepalive=-1
 
 # The duration between two keepalive transmissions in idle condition. The unit
 # is platform dependent, for example, seconds in Linux, milliseconds in Windows
 # etc. The default value of -1 (or any other negative value and 0) means to skip
 # any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
+#zmq_tcp_keepalive_idle=-1
 
 # The number of retransmissions to be carried out before declaring that remote
 # end is not available. The default value of -1 (or any other negative value and
 # 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
+#zmq_tcp_keepalive_cnt=-1
 
 # The duration between two successive keepalive retransmissions, if
 # acknowledgement to the previous keepalive transmission is not received. The
 # unit is platform dependent, for example, seconds in Linux, milliseconds in
 # Windows etc. The default value of -1 (or any other negative value and 0) means
 # to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
+#zmq_tcp_keepalive_intvl=-1
 
 # Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
+#rpc_thread_pool_size=100
 
 # Expiration timeout in seconds of a sent/received message after which it is not
 # tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
+#rpc_message_ttl=300
 
 # Wait for message acknowledgements from receivers. This mechanism works only
 # via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
+#rpc_use_acks=false
 
 # Number of seconds to wait for an ack from a cast/call. After each retry
 # attempt this timeout is multiplied by some specified multiplier. (integer
 # value)
-#rpc_ack_timeout_base = 15
+#rpc_ack_timeout_base=15
 
 # Number to multiply base ack timeout by after each retry attempt. (integer
 # value)
-#rpc_ack_timeout_multiplier = 2
+#rpc_ack_timeout_multiplier=2
 
 # Default number of message sending attempts in case of any problems occurred:
 # positive value N means at most N retries, 0 means no retries, None or -1 (or
 # any other negative values) mean to retry forever. This option is used only if
 # acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
+#rpc_retry_attempts=3
 
 # List of publisher hosts SubConsumer can subscribe on. This option has higher
 # priority then the default publishers list taken from the matchmaker. (list
@@ -1435,18 +7937,18 @@
 # The maximum body size for each  request, in bytes. (integer value)
 # Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
 # Deprecated group/name - [DEFAULT]/max_request_body_size
-#max_request_body_size = 114688
+#max_request_body_size=114688
 
 # DEPRECATED: The HTTP Header that will be used to determine what the original
 # request protocol scheme was, even if it was hidden by a SSL termination proxy.
 # (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#secure_proxy_ssl_header = X-Forwarded-Proto
+#secure_proxy_ssl_header=X-Forwarded-Proto
 
 # Whether the application is behind a proxy or not. This determines if the
 # middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
+#enable_proxy_headers_parsing=false
 
 
 [oslo_policy]
@@ -1456,14 +7958,2503 @@
 #
 
 # The file that defines policies. (string value)
-#policy_file = policy.json
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file=policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule=default
 
 # Directories where policy configuration files are stored. They can be relative
 # to any directory in the search path defined by the config_dir option, or
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
-#policy_dirs = policy.d
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs=policy.d
+
+
+[pci]
+
+#
+# From nova.conf
+#
+
+#
+# An alias for a PCI passthrough device requirement.
+#
+# This allows users to specify the alias in the extra_spec for a flavor, without
+# needing to repeat all the PCI property requirements.
+#
+# Possible Values:
+#
+# * A list of JSON values which describe the aliases. For example:
+#
+#     alias = {
+#       "name": "QuickAssist",
+#       "product_id": "0443",
+#       "vendor_id": "8086",
+#       "device_type": "type-PCI"
+#     }
+#
+#   defines an alias for the Intel QuickAssist card. (multi valued). Valid key
+#   values are :
+#
+#   * "name": Name of the PCI alias.
+#   * "product_id": Product ID of the device in hexadecimal.
+#   * "vendor_id": Vendor ID of the device in hexadecimal.
+#   * "device_type": Type of PCI device. Valid values are: "type-PCI",
+#     "type-PF" and "type-VF".
+#  (multi valued)
+# Deprecated group/name - [DEFAULT]/pci_alias
+#alias =
+
+#
+# White list of PCI devices available to VMs.
+#
+# Possible values:
+#
+# * A JSON dictionary which describe a whitelisted PCI device. It should take
+#   the following format:
+#
+#     ["vendor_id": "<id>",] ["product_id": "<id>",]
+#     ["address": "[[[[<domain>]:]<bus>]:][<slot>][.[<function>]]" |
+#      "devname": "<name>",]
+#     {"<tag>": "<tag_value>",}
+#
+#   Where '[' indicates zero or one occurrences, '{' indicates zero or multiple
+#   occurrences, and '|' mutually exclusive options. Note that any missing
+#   fields are automatically wildcarded.
+#
+#   Valid key values are :
+#
+#   * "vendor_id": Vendor ID of the device in hexadecimal.
+#   * "product_id": Product ID of the device in hexadecimal.
+#   * "address": PCI address of the device.
+#   * "devname": Device name of the device (for e.g. interface name). Not all
+#     PCI devices have a name.
+#   * "<tag>": Additional <tag> and <tag_value> used for matching PCI devices.
+#     Supported <tag>: "physical_network".
+#
+#   The address key supports traditional glob style and regular expression
+#   syntax. Valid examples are:
+#
+#     passthrough_whitelist = {"devname":"eth0",
+#                              "physical_network":"physnet"}
+#     passthrough_whitelist = {"address":"*:0a:00.*"}
+#     passthrough_whitelist = {"address":":0a:00.",
+#                              "physical_network":"physnet1"}
+#     passthrough_whitelist = {"vendor_id":"1137",
+#                              "product_id":"0071"}
+#     passthrough_whitelist = {"vendor_id":"1137",
+#                              "product_id":"0071",
+#                              "address": "0000:0a:00.1",
+#                              "physical_network":"physnet1"}
+#     passthrough_whitelist = {"address":{"domain": ".*",
+#                                         "bus": "02", "slot": "01",
+#                                         "function": "[2-7]"},
+#                              "physical_network":"physnet1"}
+#     passthrough_whitelist = {"address":{"domain": ".*",
+#                                         "bus": "02", "slot": "0[1-2]",
+#                                         "function": ".*"},
+#                              "physical_network":"physnet1"}
+#
+#   The following are invalid, as they specify mutually exclusive options:
+#
+#     passthrough_whitelist = {"devname":"eth0",
+#                              "physical_network":"physnet",
+#                              "address":"*:0a:00.*"}
+#
+# * A JSON list of JSON dictionaries corresponding to the above format. For
+#   example:
+#
+#     passthrough_whitelist = [{"product_id":"0001", "vendor_id":"8086"},
+#                              {"product_id":"0002", "vendor_id":"8086"}]
+#  (multi valued)
+# Deprecated group/name - [DEFAULT]/pci_passthrough_whitelist
+#passthrough_whitelist =
+
+[placement]
+
+#
+# From nova.conf
+#
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = nova
+password = opnfv_secret
+auth_url=http://192.168.10.35:35357/v3
+os_interface = internal
+
+#
+# Region name of this node. This is used when picking the URL in the service
+# catalog.
+#
+# Possible values:
+#
+# * Any string representing region name
+#  (string value)
+#os_region_name = openstack
+os_region_name = RegionOne
+
+#
+# Endpoint interface for this node. This is used when picking the URL in the
+# service catalog.
+#  (string value)
+#os_interface=<None>
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile=<None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile=<None>
+
+# PEM encoded client certificate key file (string value)
+#keyfile=<None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure=false
+
+# Timeout value for http requests (integer value)
+#timeout=<None>
+
+# Authentication type to load (string value)
+# Deprecated group/name - [placement]/auth_plugin
+#auth_type=<None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section=<None>
+
+# Authentication URL (string value)
+#auth_url=<None>
+
+# Domain ID to scope to (string value)
+#domain_id=<None>
+
+# Domain name to scope to (string value)
+#domain_name=<None>
+
+# Project ID to scope to (string value)
+#project_id=<None>
+
+# Project name to scope to (string value)
+#project_name=<None>
+
+# Domain ID containing project (string value)
+#project_domain_id=<None>
+
+# Domain name containing project (string value)
+#project_domain_name=<None>
+
+# Trust ID (string value)
+#trust_id=<None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id=<None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name=<None>
+
+# User ID (string value)
+#user_id=<None>
+
+# Username (string value)
+# Deprecated group/name - [placement]/user-name
+#username=<None>
+
+# User's domain id (string value)
+#user_domain_id=<None>
+
+# User's domain name (string value)
+#user_domain_name=<None>
+
+# User's password (string value)
+#password=<None>
+
+# Tenant ID (string value)
+#tenant_id=<None>
+
+# Tenant Name (string value)
+#tenant_name=<None>
+
+
+[quota]
+#
+# Quota options allow to manage quotas in openstack deployment.
+
+#
+# From nova.conf
+#
+
+#
+# The number of instances allowed per project.
+#
+# Possible Values
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_instances
+#instances=10
+
+#
+# The number of instance cores or vCPUs allowed per project.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_cores
+#cores=20
+
+#
+# The number of megabytes of instance RAM allowed per project.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_ram
+#ram=51200
+
+# DEPRECATED:
+# The number of floating IPs allowed per project.
+#
+# Floating IPs are not allocated to instances by default. Users need to select
+# them from the pool configured by the OpenStack administrator to attach to
+# their
+# instances.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_floating_ips
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#floating_ips=10
+
+# DEPRECATED:
+# The number of fixed IPs allowed per project.
+#
+# Unlike floating IPs, fixed IPs are allocated dynamically by the network
+# component when instances boot up.  This quota value should be at least the
+# number of instances allowed
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_fixed_ips
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#fixed_ips=-1
+
+#
+# The number of metadata items allowed per instance.
+#
+# Users can associate metadata with an instance during instance creation. This
+# metadata takes the form of key-value pairs.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_metadata_items
+#metadata_items=128
+
+#
+# The number of injected files allowed.
+#
+# File injection allows users to customize the personality of an instance by
+# injecting data into it upon boot. Only text file injection is permitted:
+# binary
+# or ZIP files are not accepted. During file injection, any existing files that
+# match specified files are renamed to include ``.bak`` extension appended with
+# a
+# timestamp.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_injected_files
+#injected_files=5
+
+#
+# The number of bytes allowed per injected file.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_injected_file_content_bytes
+#injected_file_content_bytes=10240
+
+#
+# The maximum allowed injected file path length.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_injected_file_path_length
+#injected_file_path_length=255
+
+# DEPRECATED:
+# The number of security groups per project.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_security_groups
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#security_groups=10
+
+# DEPRECATED:
+# The number of security rules per security group.
+#
+# The associated rules in each security group control the traffic to instances
+# in
+# the group.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_security_group_rules
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#security_group_rules=20
+
+#
+# The maximum number of key pairs allowed per user.
+#
+# Users can create at least one key pair for each project and use the key pair
+# for multiple instances that belong to that project.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_key_pairs
+#key_pairs=100
+
+#
+# The maxiumum number of server groups per project.
+#
+# Server groups are used to control the affinity and anti-affinity scheduling
+# policy for a group of servers or instances. Reducing the quota will not affect
+# any existing group, but new servers will not be allowed into groups that have
+# become over quota.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_server_groups
+#server_groups=10
+
+#
+# The maximum number of servers per server group.
+#
+# Possible values:
+#
+# * A positive integer or 0.
+# * -1 to disable the quota.
+#  (integer value)
+# Minimum value: -1
+# Deprecated group/name - [DEFAULT]/quota_server_group_members
+#server_group_members=10
+
+#
+# The number of seconds until a reservation expires.
+#
+# This quota represents the time period for invalidating quota reservations.
+#  (integer value)
+# Deprecated group/name - [DEFAULT]/reservation_expire
+#reservation_expire=86400
+
+#
+# The count of reservations until usage is refreshed.
+#
+# This defaults to 0 (off) to avoid additional load but it is useful to turn on
+# to help keep quota usage up-to-date and reduce the impact of out of sync usage
+# issues.
+#  (integer value)
+# Minimum value: 0
+# Deprecated group/name - [DEFAULT]/until_refresh
+#until_refresh=0
+
+#
+# The number of seconds between subsequent usage refreshes.
+#
+# This defaults to 0 (off) to avoid additional load but it is useful to turn on
+# to help keep quota usage up-to-date and reduce the impact of out of sync usage
+# issues. Note that quotas are not updated on a periodic task, they will update
+# on a new reservation if max_age has passed since the last reservation.
+#  (integer value)
+# Minimum value: 0
+# Deprecated group/name - [DEFAULT]/max_age
+#max_age=0
+
+# DEPRECATED:
+# The quota enforcer driver.
+#
+# Provides abstraction for quota checks. Users can configure a specific
+# driver to use for quota checks.
+#
+# Possible values:
+#
+# * nova.quota.DbQuotaDriver (default) or any string representing fully
+#   qualified class name.
+#  (string value)
+# Deprecated group/name - [DEFAULT]/quota_driver
+# This option is deprecated for removal since 14.0.0.
+# Its value may be silently ignored in the future.
+#driver=nova.quota.DbQuotaDriver
+
+
+[rdp]
+#
+# Options under this group enable and configure Remote Desktop Protocol (
+# RDP) related features.
+#
+# This group is only relevant to Hyper-V users.
+
+#
+# From nova.conf
+#
+
+#
+# Enable Remote Desktop Protocol (RDP) related features.
+#
+# Hyper-V, unlike the majority of the hypervisors employed on Nova compute
+# nodes, uses RDP instead of VNC and SPICE as a desktop sharing protocol to
+# provide instance console access. This option enables RDP for graphical
+# console access for virtual machines created by Hyper-V.
+#
+# **Note:** RDP should only be enabled on compute nodes that support the Hyper-V
+# virtualization platform.
+#
+# Related options:
+#
+# * ``compute_driver``: Must be hyperv.
+#
+#  (boolean value)
+#enabled=false
+
+#
+# The URL an end user would use to connect to the RDP HTML5 console proxy.
+# The console proxy service is called with this token-embedded URL and
+# establishes the connection to the proper instance.
+#
+# An RDP HTML5 console proxy service will need to be configured to listen on the
+# address configured here. Typically the console proxy service would be run on a
+# controller node. The localhost address used as default would only work in a
+# single node environment i.e. devstack.
+#
+# An RDP HTML5 proxy allows a user to access via the web the text or graphical
+# console of any Windows server or workstation using RDP. RDP HTML5 console
+# proxy services include FreeRDP, wsgate.
+# See https://github.com/FreeRDP/FreeRDP-WebConnect
+#
+# Possible values:
+#
+# * <scheme>://<ip-address>:<port-number>/
+#
+#   The scheme must be identical to the scheme configured for the RDP HTML5
+#   console proxy service.
+#
+#   The IP address must be identical to the address on which the RDP HTML5
+#   console proxy service is listening.
+#
+#   The port must be identical to the port on which the RDP HTML5 console proxy
+#   service is listening.
+#
+# Related options:
+#
+# * ``rdp.enabled``: Must be set to ``True`` for ``html5_proxy_base_url`` to be
+#   effective.
+#  (string value)
+#html5_proxy_base_url=http://127.0.0.1:6083/
+
+
+[remote_debug]
+
+#
+# From nova.conf
+#
+
+#
+# Debug host (IP or name) to connect to. This command line parameter is used
+# when
+# you want to connect to a nova service via a debugger running on a different
+# host.
+#
+# Note that using the remote debug option changes how Nova uses the eventlet
+# library to support async IO. This could result in failures that do not occur
+# under normal operation. Use at your own risk.
+#
+# Possible Values:
+#
+#    * IP address of a remote host as a command line parameter
+#      to a nova service. For Example:
+#
+#     /usr/local/bin/nova-compute --config-file /etc/nova/nova.conf
+#     --remote_debug-host <IP address where the debugger is running>
+#  (string value)
+#host=<None>
+
+#
+# Debug port to connect to. This command line parameter allows you to specify
+# the port you want to use to connect to a nova service via a debugger running
+# on different host.
+#
+# Note that using the remote debug option changes how Nova uses the eventlet
+# library to support async IO. This could result in failures that do not occur
+# under normal operation. Use at your own risk.
+#
+# Possible Values:
+#
+#    * Port number you want to use as a command line parameter
+#      to a nova service. For Example:
+#
+#     /usr/local/bin/nova-compute --config-file /etc/nova/nova.conf
+#     --remote_debug-host <IP address where the debugger is running>
+#     --remote_debug-port <port> it's listening on>.
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#port=<None>
+
+
+[scheduler]
+
+#
+# From nova.conf
+#
+
+#
+# The scheduler host manager to use.
+#
+# The host manager manages the in-memory picture of the hosts that the scheduler
+# uses. The options values are chosen from the entry points under the namespace
+# 'nova.scheduler.host_manager' in 'setup.cfg'.
+#  (string value)
+# Allowed values: host_manager, ironic_host_manager
+# Deprecated group/name - [DEFAULT]/scheduler_host_manager
+#host_manager=host_manager
+
+#
+# The class of the driver used by the scheduler.
+#
+# The options are chosen from the entry points under the namespace
+# 'nova.scheduler.driver' in 'setup.cfg'.
+#
+# Possible values:
+#
+# * A string, where the string corresponds to the class name of a scheduler
+#   driver. There are a number of options available:
+# ** 'caching_scheduler', which aggressively caches the system state for better
+#    individual scheduler performance at the risk of more retries when running
+#    multiple schedulers
+# ** 'chance_scheduler', which simply picks a host at random
+# ** 'fake_scheduler', which is used for testing
+# ** A custom scheduler driver. In this case, you will be responsible for
+#    creating and maintaining the entry point in your 'setup.cfg' file
+#  (string value)
+# Allowed values: filter_scheduler, caching_scheduler, chance_scheduler, fake_scheduler
+# Deprecated group/name - [DEFAULT]/scheduler_driver
+#driver=filter_scheduler
+
+#
+# Periodic task interval.
+#
+# This value controls how often (in seconds) to run periodic tasks in the
+# scheduler. The specific tasks that are run for each period are determined by
+# the particular scheduler being used.
+#
+# If this is larger than the nova-service 'service_down_time' setting, Nova may
+# report the scheduler service as down. This is because the scheduler driver is
+# responsible for sending a heartbeat and it will only do that as often as this
+# option allows. As each scheduler can work a little differently than the
+# others,
+# be sure to test this with your selected scheduler.
+#
+# Possible values:
+#
+# * An integer, where the integer corresponds to periodic task interval in
+#   seconds. 0 uses the default interval (60 seconds). A negative value disables
+#   periodic tasks.
+#
+# Related options:
+#
+# * ``nova-service service_down_time``
+#  (integer value)
+# Deprecated group/name - [DEFAULT]/scheduler_driver_task_period
+#periodic_task_interval=60
+
+#
+# Maximum number of schedule attempts for a chosen host.
+#
+# This is the maximum number of attempts that will be made to schedule an
+# instance before it is assumed that the failures aren't due to normal
+# occasional
+# race conflicts, but rather some other problem. When this is reached a
+# MaxRetriesExceeded exception is raised, and the instance is set to an error
+# state.
+#
+# Possible values:
+#
+# * A positive integer, where the integer corresponds to the max number of
+#   attempts that can be made when scheduling an instance.
+#          (integer value)
+# Minimum value: 1
+# Deprecated group/name - [DEFAULT]/scheduler_max_attempts
+#max_attempts=3
+
+#
+# Periodic task interval.
+#
+# This value controls how often (in seconds) the scheduler should attempt
+# to discover new hosts that have been added to cells. If negative (the
+# default), no automatic discovery will occur.
+#
+# Small deployments may want this periodic task enabled, as surveying the
+# cells for new hosts is likely to be lightweight enough to not cause undue
+# burdon to the scheduler. However, larger clouds (and those that are not
+# adding hosts regularly) will likely want to disable this automatic
+# behavior and instead use the `nova-manage cell_v2 discover_hosts` command
+# when hosts have been added to a cell.
+#  (integer value)
+# Minimum value: -1
+#discover_hosts_in_cells_interval=-1
+
+
+[serial_console]
+#
+# The serial console feature allows you to connect to a guest in case a
+# graphical console like VNC, RDP or SPICE is not available. This is only
+# currently supported for the libvirt, Ironic and hyper-v drivers.
+
+#
+# From nova.conf
+#
+
+#
+# Enable the serial console feature.
+#
+# In order to use this feature, the service ``nova-serialproxy`` needs to run.
+# This service is typically executed on the controller node.
+#  (boolean value)
+#enabled=false
+
+#
+# A range of TCP ports a guest can use for its backend.
+#
+# Each instance which gets created will use one port out of this range. If the
+# range is not big enough to provide another port for an new instance, this
+# instance won't get launched.
+#
+# Possible values:
+#
+# * Each string which passes the regex ``\d+:\d+`` For example ``10000:20000``.
+#   Be sure that the first port number is lower than the second port number
+#   and that both are in range from 0 to 65535.
+#  (string value)
+#port_range=10000:20000
+
+#
+# The URL an end user would use to connect to the ``nova-serialproxy`` service.
+#
+# The ``nova-serialproxy`` service is called with this token enriched URL
+# and establishes the connection to the proper instance.
+#
+# Related options:
+#
+# * The IP address must be identical to the address to which the
+#   ``nova-serialproxy`` service is listening (see option ``serialproxy_host``
+#   in this section).
+# * The port must be the same as in the option ``serialproxy_port`` of this
+#   section.
+# * If you choose to use a secured websocket connection, then start this option
+#   with ``wss://`` instead of the unsecured ``ws://``. The options ``cert``
+#   and ``key`` in the ``[DEFAULT]`` section have to be set for that.
+#  (uri value)
+#base_url=ws://127.0.0.1:6083/
+
+#
+# The IP address to which proxy clients (like ``nova-serialproxy``) should
+# connect to get the serial console of an instance.
+#
+# This is typically the IP address of the host of a ``nova-compute`` service.
+#  (string value)
+#proxyclient_address=127.0.0.1
+
+#
+# The IP address which is used by the ``nova-serialproxy`` service to listen
+# for incoming requests.
+#
+# The ``nova-serialproxy`` service listens on this IP address for incoming
+# connection requests to instances which expose serial console.
+#
+# Related options:
+#
+# * Ensure that this is the same IP address which is defined in the option
+#   ``base_url`` of this section or use ``0.0.0.0`` to listen on all addresses.
+#  (string value)
+#serialproxy_host=0.0.0.0
+
+#
+# The port number which is used by the ``nova-serialproxy`` service to listen
+# for incoming requests.
+#
+# The ``nova-serialproxy`` service listens on this port number for incoming
+# connection requests to instances which expose serial console.
+#
+# Related options:
+#
+# * Ensure that this is the same port number which is defined in the option
+#   ``base_url`` of this section.
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#serialproxy_port=6083
+
+
+[service_user]
+#
+# Configuration options for service to service authentication using a service
+# token. These options allow to send a service token along with the
+# user's token when contacting external REST APIs.
+
+#
+# From nova.conf
+#
+
+#
+# When True, if sending a user token to an REST API, also send a service token.
+#
+# Nova often reuses the user token provided to the nova-api to talk to other
+# REST APIs, such as Cinder and Neutron. It is possible that while the
+# user token was valid when the request was made to Nova, the token may expire
+# before it reaches the other service. To avoid any failures, and to
+# make it clear it is Nova calling the service on the users behalf, we include
+# a server token along with the user token. Should the user's token have
+# expired, a valid service token ensures the REST API request will still be
+# accepted by the keystone middleware.
+#
+# This feature is currently experimental, and as such is turned off by default
+# while full testing and performance tuning of this feature is completed.
+#  (boolean value)
+#send_service_user_token=false
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile=<None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile=<None>
+
+# PEM encoded client certificate key file (string value)
+#keyfile=<None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure=false
+
+# Timeout value for http requests (integer value)
+#timeout=<None>
+
+# Authentication type to load (string value)
+# Deprecated group/name - [service_user]/auth_plugin
+#auth_type=<None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section=<None>
+
+# Authentication URL (string value)
+#auth_url=<None>
+
+# Domain ID to scope to (string value)
+#domain_id=<None>
+
+# Domain name to scope to (string value)
+#domain_name=<None>
+
+# Project ID to scope to (string value)
+#project_id=<None>
+
+# Project name to scope to (string value)
+#project_name=<None>
+
+# Domain ID containing project (string value)
+#project_domain_id=<None>
+
+# Domain name containing project (string value)
+#project_domain_name=<None>
+
+# Trust ID (string value)
+#trust_id=<None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id=<None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name=<None>
+
+# User ID (string value)
+#user_id=<None>
+
+# Username (string value)
+# Deprecated group/name - [service_user]/user-name
+#username=<None>
+
+# User's domain id (string value)
+#user_domain_id=<None>
+
+# User's domain name (string value)
+#user_domain_name=<None>
+
+# User's password (string value)
+#password=<None>
+
+# Tenant ID (string value)
+#tenant_id=<None>
+
+# Tenant Name (string value)
+#tenant_name=<None>
+
+
+[spice]
+#
+# SPICE console feature allows you to connect to a guest virtual machine.
+# SPICE is a replacement for fairly limited VNC protocol.
+#
+# Following requirements must be met in order to use SPICE:
+#
+# * Virtualization driver must be libvirt
+# * spice.enabled set to True
+# * vnc.enabled set to False
+# * update html5proxy_base_url
+# * update server_proxyclient_address
+enabled = false
+html5proxy_base_url = https://100.64.200.101:6080/spice_auto.html
+#
+# From nova.conf
+#
+
+#
+# Enable SPICE related features.
+#
+# Related options:
+#
+# * VNC must be explicitly disabled to get access to the SPICE console. Set the
+#   enabled option to False in the [vnc] section to disable the VNC console.
+#  (boolean value)
+#enabled=false
+
+#
+# Enable the SPICE guest agent support on the instances.
+#
+# The Spice agent works with the Spice protocol to offer a better guest console
+# experience. However, the Spice console can still be used without the Spice
+# Agent. With the Spice agent installed the following features are enabled:
+#
+# * Copy & Paste of text and images between the guest and client machine
+# * Automatic adjustment of resolution when the client screen changes - e.g.
+#   if you make the Spice console full screen the guest resolution will adjust
+# to
+#   match it rather than letterboxing.
+# * Better mouse integration - The mouse can be captured and released without
+#   needing to click inside the console or press keys to release it. The
+#   performance of mouse movement is also improved.
+#  (boolean value)
+#agent_enabled=true
+
+#
+# Location of the SPICE HTML5 console proxy.
+#
+# End user would use this URL to connect to the `nova-spicehtml5proxy``
+# service. This service will forward request to the console of an instance.
+#
+# In order to use SPICE console, the service ``nova-spicehtml5proxy`` should be
+# running. This service is typically launched on the controller node.
+#
+# Possible values:
+#
+# * Must be a valid URL of the form:  ``http://host:port/spice_auto.html``
+#   where host is the node running ``nova-spicehtml5proxy`` and the port is
+#   typically 6082. Consider not using default value as it is not well defined
+#   for any real deployment.
+#
+# Related options:
+#
+# * This option depends on ``html5proxy_host`` and ``html5proxy_port`` options.
+#   The access URL returned by the compute node must have the host
+#   and port where the ``nova-spicehtml5proxy`` service is listening.
+#  (uri value)
+#html5proxy_base_url=http://127.0.0.1:6082/spice_auto.html
+
+#
+# The  address where the SPICE server running on the instances should listen.
+#
+# Typically, the ``nova-spicehtml5proxy`` proxy client runs on the controller
+# node and connects over the private network to this address on the compute
+# node(s).
+#
+# Possible values:
+#
+# * IP address to listen on.
+#  (string value)
+#server_listen=127.0.0.1
+
+#
+# The address used by ``nova-spicehtml5proxy`` client to connect to instance
+# console.
+#
+# Typically, the ``nova-spicehtml5proxy`` proxy client runs on the
+# controller node and connects over the private network to this address on the
+# compute node(s).
+#
+# Possible values:
+#
+# * Any valid IP address on the compute node.
+#
+# Related options:
+#
+# * This option depends on the ``server_listen`` option.
+#   The proxy client must be able to access the address specified in
+#   ``server_listen`` using the value of this option.
+#  (string value)
+#server_proxyclient_address=127.0.0.1
+
+#
+# A keyboard layout which is supported by the underlying hypervisor on this
+# node.
+#
+# Possible values:
+# * This is usually an 'IETF language tag' (default is 'en-us'). If you
+#   use QEMU as hypervisor, you should find the list of supported keyboard
+#   layouts at /usr/share/qemu/keymaps.
+#  (string value)
+#keymap=en-us
+
+#
+# IP address or a hostname on which the ``nova-spicehtml5proxy`` service
+# listens for incoming requests.
+#
+# Related options:
+#
+# * This option depends on the ``html5proxy_base_url`` option.
+#   The ``nova-spicehtml5proxy`` service must be listening on a host that is
+#   accessible from the HTML5 client.
+#  (string value)
+#html5proxy_host=0.0.0.0
+
+#
+# Port on which the ``nova-spicehtml5proxy`` service listens for incoming
+# requests.
+#
+# Related options:
+#
+# * This option depends on the ``html5proxy_base_url`` option.
+#   The ``nova-spicehtml5proxy`` service must be listening on a port that is
+#   accessible from the HTML5 client.
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#html5proxy_port=6082
+
+
+[ssl]
+
+#
+# From nova.conf
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#cert_file=<None>
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#key_file=<None>
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+#version=<None>
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
+#ciphers=<None>
+
+
+[trusted_computing]
+#
+# Configuration options for enabling Trusted Platform Module.
+
+#
+# From nova.conf
+#
+
+#
+# The host to use as the attestation server.
+#
+# Cloud computing pools can involve thousands of compute nodes located at
+# different geographical locations, making it difficult for cloud providers to
+# identify a node's trustworthiness. When using the Trusted filter, users can
+# request that their VMs only be placed on nodes that have been verified by the
+# attestation server specified in this option.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'TrustedFilter' filter is enabled.
+#
+# Possible values:
+#
+# * A string representing the host name or IP address of the attestation server,
+#   or an empty string.
+#
+# Related options:
+#
+# * attestation_server_ca_file
+# * attestation_port
+# * attestation_api_url
+# * attestation_auth_blob
+# * attestation_auth_timeout
+# * attestation_insecure_ssl
+#  (string value)
+#attestation_server=<None>
+
+#
+# The absolute path to the certificate to use for authentication when connecting
+# to the attestation server. See the `attestation_server` help text for more
+# information about host verification.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'TrustedFilter' filter is enabled.
+#
+# Possible values:
+#
+# * A string representing the path to the authentication certificate for the
+#   attestation server, or an empty string.
+#
+# Related options:
+#
+# * attestation_server
+# * attestation_port
+# * attestation_api_url
+# * attestation_auth_blob
+# * attestation_auth_timeout
+# * attestation_insecure_ssl
+#  (string value)
+#attestation_server_ca_file=<None>
+
+#
+# The port to use when connecting to the attestation server. See the
+# `attestation_server` help text for more information about host verification.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'TrustedFilter' filter is enabled.
+#
+# Related options:
+#
+# * attestation_server
+# * attestation_server_ca_file
+# * attestation_api_url
+# * attestation_auth_blob
+# * attestation_auth_timeout
+# * attestation_insecure_ssl
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#attestation_port=8443
+
+#
+# The URL on the attestation server to use. See the `attestation_server` help
+# text for more information about host verification.
+#
+# This value must be just that path portion of the full URL, as it will be
+# joined
+# to the host specified in the attestation_server option.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'TrustedFilter' filter is enabled.
+#
+# Possible values:
+#
+# * A valid URL string of the attestation server, or an empty string.
+#
+# Related options:
+#
+# * attestation_server
+# * attestation_server_ca_file
+# * attestation_port
+# * attestation_auth_blob
+# * attestation_auth_timeout
+# * attestation_insecure_ssl
+#  (string value)
+#attestation_api_url=/OpenAttestationWebServices/V1.0
+
+#
+# Attestation servers require a specific blob that is used to authenticate. The
+# content and format of the blob are determined by the particular attestation
+# server being used. There is no default value; you must supply the value as
+# specified by your attestation service. See the `attestation_server` help text
+# for more information about host verification.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'TrustedFilter' filter is enabled.
+#
+# Possible values:
+#
+# * A string containing the specific blob required by the attestation server, or
+#   an empty string.
+#
+# Related options:
+#
+# * attestation_server
+# * attestation_server_ca_file
+# * attestation_port
+# * attestation_api_url
+# * attestation_auth_timeout
+# * attestation_insecure_ssl
+#  (string value)
+#attestation_auth_blob=<None>
+
+#
+# This value controls how long a successful attestation is cached. Once this
+# period has elapsed, a new attestation request will be made. See the
+# `attestation_server` help text for more information about host verification.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'TrustedFilter' filter is enabled.
+#
+# Possible values:
+#
+# * A integer value, corresponding to the timeout interval for attestations in
+#   seconds. Any integer is valid, although setting this to zero or negative
+#   values can greatly impact performance when using an attestation service.
+#
+# Related options:
+#
+# * attestation_server
+# * attestation_server_ca_file
+# * attestation_port
+# * attestation_api_url
+# * attestation_auth_blob
+# * attestation_insecure_ssl
+#  (integer value)
+#attestation_auth_timeout=60
+
+#
+# When set to True, the SSL certificate verification is skipped for the
+# attestation service. See the `attestation_server` help text for more
+# information about host verification.
+#
+# This option is only used by the FilterScheduler and its subclasses; if you use
+# a different scheduler, this option has no effect. Also note that this setting
+# only affects scheduling if the 'TrustedFilter' filter is enabled.
+#
+# Related options:
+#
+# * attestation_server
+# * attestation_server_ca_file
+# * attestation_port
+# * attestation_api_url
+# * attestation_auth_blob
+# * attestation_auth_timeout
+#  (boolean value)
+#attestation_insecure_ssl=false
+
+
+[upgrade_levels]
+#
+# upgrade_levels options are used to set version cap for RPC
+# messages sent between different nova services.
+#
+# By default all services send messages using the latest version
+# they know about.
+#
+# The compute upgrade level is an important part of rolling upgrades
+# where old and new nova-compute services run side by side.
+#
+# The other options can largely be ignored, and are only kept to
+# help with a possible future backport issue.
+
+#
+# From nova.conf
+#
+
+#
+# Compute RPC API version cap.
+#
+# By default, we always send messages using the most recent version
+# the client knows about.
+#
+# Where you have old and new compute services running, you should set
+# this to the lowest deployed version. This is to guarantee that all
+# services never send messages that one of the compute nodes can't
+# understand. Note that we only support upgrading from release N to
+# release N+1.
+#
+# Set this option to "auto" if you want to let the compute RPC module
+# automatically determine what version to use based on the service
+# versions in the deployment.
+#
+# Possible values:
+#
+# * By default send the latest version the client knows about
+# * 'auto': Automatically determines what version to use based on
+#   the service versions in the deployment.
+# * A string representing a version number in the format 'N.N';
+#   for example, possible values might be '1.12' or '2.0'.
+# * An OpenStack release name, in lower case, such as 'mitaka' or
+#   'liberty'.
+#  (string value)
+#compute=<None>
+
+# Cells RPC API version cap (string value)
+#cells=<None>
+
+# Intercell RPC API version cap (string value)
+#intercell=<None>
+
+# Cert RPC API version cap (string value)
+#cert=<None>
+
+# Scheduler RPC API version cap (string value)
+#scheduler=<None>
+
+# Conductor RPC API version cap (string value)
+#conductor=<None>
+
+# Console RPC API version cap (string value)
+#console=<None>
+
+# Consoleauth RPC API version cap (string value)
+#consoleauth=<None>
+
+# Network RPC API version cap (string value)
+#network=<None>
+
+# Base API RPC API version cap (string value)
+#baseapi=<None>
+
+
+[vendordata_dynamic_auth]
+#
+# Options within this group control the authentication of the vendordata
+# subsystem of the metadata API server (and config drive) with external systems.
+
+#
+# From nova.conf
+#
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile=<None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile=<None>
+
+# PEM encoded client certificate key file (string value)
+#keyfile=<None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure=false
+
+# Timeout value for http requests (integer value)
+#timeout=<None>
+
+# Authentication type to load (string value)
+# Deprecated group/name - [vendordata_dynamic_auth]/auth_plugin
+#auth_type=<None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section=<None>
+
+# Authentication URL (string value)
+#auth_url=<None>
+
+# Domain ID to scope to (string value)
+#domain_id=<None>
+
+# Domain name to scope to (string value)
+#domain_name=<None>
+
+# Project ID to scope to (string value)
+#project_id=<None>
+
+# Project name to scope to (string value)
+#project_name=<None>
+
+# Domain ID containing project (string value)
+#project_domain_id=<None>
+
+# Domain name containing project (string value)
+#project_domain_name=<None>
+
+# Trust ID (string value)
+#trust_id=<None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id=<None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name=<None>
+
+# User ID (string value)
+#user_id=<None>
+
+# Username (string value)
+# Deprecated group/name - [vendordata_dynamic_auth]/user-name
+#username=<None>
+
+# User's domain id (string value)
+#user_domain_id=<None>
+
+# User's domain name (string value)
+#user_domain_name=<None>
+
+# User's password (string value)
+#password=<None>
+
+# Tenant ID (string value)
+#tenant_id=<None>
+
+# Tenant Name (string value)
+#tenant_name=<None>
+
+
+[vnc]
+#
+# Virtual Network Computer (VNC) can be used to provide remote desktop
+# console access to instances for tenants and/or administrators.
+
+#
+# From nova.conf
+#
+enabled = true
+novncproxy_base_url=https://100.64.200.101:6080/vnc_auto.html
+novncproxy_port=6080
+vncserver_listen=192.168.10.53
+vncserver_proxyclient_address=192.168.10.53
+keymap = en-us
+
+#
+# Enable VNC related features.
+#
+# Guests will get created with graphical devices to support this. Clients
+# (for example Horizon) can then establish a VNC connection to the guest.
+#  (boolean value)
+# Deprecated group/name - [DEFAULT]/vnc_enabled
+#enabled=true
+
+#
+# Keymap for VNC.
+#
+# The keyboard mapping (keymap) determines which keyboard layout a VNC
+# session should use by default.
+#
+# Possible values:
+#
+# * A keyboard layout which is supported by the underlying hypervisor on
+#   this node. This is usually an 'IETF language tag' (for example
+#   'en-us').  If you use QEMU as hypervisor, you should find the  list
+#   of supported keyboard layouts at ``/usr/share/qemu/keymaps``.
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vnc_keymap
+#keymap=en-us
+
+#
+# The IP address or hostname on which an instance should listen to for
+# incoming VNC connection requests on this node.
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vncserver_listen
+#vncserver_listen=127.0.0.1
+
+#
+# Private, internal IP address or hostname of VNC console proxy.
+#
+# The VNC proxy is an OpenStack component that enables compute service
+# users to access their instances through VNC clients.
+#
+# This option sets the private address to which proxy clients, such as
+# ``nova-xvpvncproxy``, should connect to.
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vncserver_proxyclient_address
+#vncserver_proxyclient_address=127.0.0.1
+
+#
+# Public address of noVNC VNC console proxy.
+#
+# The VNC proxy is an OpenStack component that enables compute service
+# users to access their instances through VNC clients. noVNC provides
+# VNC support through a websocket-based client.
+#
+# This option sets the public base URL to which client systems will
+# connect. noVNC clients can use this address to connect to the noVNC
+# instance and, by extension, the VNC sessions.
+#
+# Related options:
+#
+# * novncproxy_host
+# * novncproxy_port
+#  (uri value)
+# Deprecated group/name - [DEFAULT]/novncproxy_base_url
+#novncproxy_base_url=http://127.0.0.1:6080/vnc_auto.html
+
+#
+# IP address or hostname that the XVP VNC console proxy should bind to.
+#
+# The VNC proxy is an OpenStack component that enables compute service
+# users to access their instances through VNC clients. Xen provides
+# the Xenserver VNC Proxy, or XVP, as an alternative to the
+# websocket-based noVNC proxy used by Libvirt. In contrast to noVNC,
+# XVP clients are Java-based.
+#
+# This option sets the private address to which the XVP VNC console proxy
+# service should bind to.
+#
+# Related options:
+#
+# * xvpvncproxy_port
+# * xvpvncproxy_base_url
+#  (string value)
+# Deprecated group/name - [DEFAULT]/xvpvncproxy_host
+#xvpvncproxy_host=0.0.0.0
+
+#
+# Port that the XVP VNC console proxy should bind to.
+#
+# The VNC proxy is an OpenStack component that enables compute service
+# users to access their instances through VNC clients. Xen provides
+# the Xenserver VNC Proxy, or XVP, as an alternative to the
+# websocket-based noVNC proxy used by Libvirt. In contrast to noVNC,
+# XVP clients are Java-based.
+#
+# This option sets the private port to which the XVP VNC console proxy
+# service should bind to.
+#
+# Related options:
+#
+# * xvpvncproxy_host
+# * xvpvncproxy_base_url
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/xvpvncproxy_port
+#xvpvncproxy_port=6081
+
+#
+# Public URL address of XVP VNC console proxy.
+#
+# The VNC proxy is an OpenStack component that enables compute service
+# users to access their instances through VNC clients. Xen provides
+# the Xenserver VNC Proxy, or XVP, as an alternative to the
+# websocket-based noVNC proxy used by Libvirt. In contrast to noVNC,
+# XVP clients are Java-based.
+#
+# This option sets the public base URL to which client systems will
+# connect. XVP clients can use this address to connect to the XVP
+# instance and, by extension, the VNC sessions.
+#
+# Related options:
+#
+# * xvpvncproxy_host
+# * xvpvncproxy_port
+#  (uri value)
+# Deprecated group/name - [DEFAULT]/xvpvncproxy_base_url
+#xvpvncproxy_base_url=http://127.0.0.1:6081/console
+
+#
+# IP address that the noVNC console proxy should bind to.
+#
+# The VNC proxy is an OpenStack component that enables compute service
+# users to access their instances through VNC clients. noVNC provides
+# VNC support through a websocket-based client.
+#
+# This option sets the private address to which the noVNC console proxy
+# service should bind to.
+#
+# Related options:
+#
+# * novncproxy_port
+# * novncproxy_base_url
+#  (string value)
+# Deprecated group/name - [DEFAULT]/novncproxy_host
+#novncproxy_host=0.0.0.0
+
+#
+# Port that the noVNC console proxy should bind to.
+#
+# The VNC proxy is an OpenStack component that enables compute service
+# users to access their instances through VNC clients. noVNC provides
+# VNC support through a websocket-based client.
+#
+# This option sets the private port to which the noVNC console proxy
+# service should bind to.
+#
+# Related options:
+#
+# * novncproxy_host
+# * novncproxy_base_url
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/novncproxy_port
+#novncproxy_port=6080
+
+
+[workarounds]
+#
+# A collection of workarounds used to mitigate bugs or issues found in system
+# tools (e.g. Libvirt or QEMU) or Nova itself under certain conditions. These
+# should only be enabled in exceptional circumstances. All options are linked
+# against bug IDs, where more information on the issue can be found.
+
+#
+# From nova.conf
+#
+
+#
+# Use sudo instead of rootwrap.
+#
+# Allow fallback to sudo for performance reasons.
+#
+# For more information, refer to the bug report:
+#
+#   https://bugs.launchpad.net/nova/+bug/1415106
+#
+# Possible values:
+#
+# * True: Use sudo instead of rootwrap
+# * False: Use rootwrap as usual
+#
+# Interdependencies to other options:
+#
+# * Any options that affect 'rootwrap' will be ignored.
+#  (boolean value)
+#disable_rootwrap=false
+
+#
+# Disable live snapshots when using the libvirt driver.
+#
+# Live snapshots allow the snapshot of the disk to happen without an
+# interruption to the guest, using coordination with a guest agent to
+# quiesce the filesystem.
+#
+# When using libvirt 1.2.2 live snapshots fail intermittently under load
+# (likely related to concurrent libvirt/qemu operations). This config
+# option provides a mechanism to disable live snapshot, in favor of cold
+# snapshot, while this is resolved. Cold snapshot causes an instance
+# outage while the guest is going through the snapshotting process.
+#
+# For more information, refer to the bug report:
+#
+#   https://bugs.launchpad.net/nova/+bug/1334398
+#
+# Possible values:
+#
+# * True: Live snapshot is disabled when using libvirt
+# * False: Live snapshots are always used when snapshotting (as long as
+#   there is a new enough libvirt and the backend storage supports it)
+#  (boolean value)
+#disable_libvirt_livesnapshot=true
+disable_libvirt_livesnapshot=true
+
+#
+# Enable handling of events emitted from compute drivers.
+#
+# Many compute drivers emit lifecycle events, which are events that occur when,
+# for example, an instance is starting or stopping. If the instance is going
+# through task state changes due to an API operation, like resize, the events
+# are ignored.
+#
+# This is an advanced feature which allows the hypervisor to signal to the
+# compute service that an unexpected state change has occurred in an instance
+# and that the instance can be shutdown automatically. Unfortunately, this can
+# race in some conditions, for example in reboot operations or when the compute
+# service or when host is rebooted (planned or due to an outage). If such races
+# are common, then it is advisable to disable this feature.
+#
+# Care should be taken when this feature is disabled and
+# 'sync_power_state_interval' is set to a negative value. In this case, any
+# instances that get out of sync between the hypervisor and the Nova database
+# will have to be synchronized manually.
+#
+# For more information, refer to the bug report:
+#
+#   https://bugs.launchpad.net/bugs/1444630
+#
+# Interdependencies to other options:
+#
+# * If ``sync_power_state_interval`` is negative and this feature is disabled,
+#   then instances that get out of sync between the hypervisor and the Nova
+#   database will have to be synchronized manually.
+#  (boolean value)
+#handle_virt_lifecycle_events=true
+
+
+[wsgi]
+#
+# Options under this group are used to configure WSGI (Web Server Gateway
+# Interface). WSGI is used to serve API requests.
+
+#
+# From nova.conf
+#
+
+#
+# This option represents a file name for the paste.deploy config for nova-api.
+#
+# Possible values:
+#
+# * A string representing file name for the paste.deploy config.
+#  (string value)
+# Deprecated group/name - [DEFAULT]/api_paste_config
+api_paste_config=/etc/nova/api-paste.ini
+
+#
+# It represents a python format string that is used as the template to generate
+# log lines. The following values can be formatted into it: client_ip,
+# date_time, request_line, status_code, body_length, wall_seconds.
+#
+# This option is used for building custom request loglines.
+#
+# Possible values:
+#
+# * '%(client_ip)s "%(request_line)s" status: %(status_code)s'
+#   'len: %(body_length)s time: %(wall_seconds).7f' (default)
+# * Any formatted string formed by specific values.
+#  (string value)
+# Deprecated group/name - [DEFAULT]/wsgi_log_format
+#wsgi_log_format=%(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f
+
+#
+# This option specifies the HTTP header used to determine the protocol scheme
+# for the original request, even if it was removed by a SSL terminating proxy.
+#
+# Possible values:
+#
+# * None (default) - the request scheme is not influenced by any HTTP headers.
+# * Valid HTTP header, like HTTP_X_FORWARDED_PROTO
+#  (string value)
+# Deprecated group/name - [DEFAULT]/secure_proxy_ssl_header
+#secure_proxy_ssl_header=<None>
+
+#
+# This option allows setting path to the CA certificate file that should be used
+# to verify connecting clients.
+#
+# Possible values:
+#
+# * String representing path to the CA certificate file.
+#
+# Related options:
+#
+# * enabled_ssl_apis
+#  (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+#ssl_ca_file=<None>
+
+#
+# This option allows setting path to the SSL certificate of API server.
+#
+# Possible values:
+#
+# * String representing path to the SSL certificate.
+#
+# Related options:
+#
+# * enabled_ssl_apis
+#  (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#ssl_cert_file=<None>
+
+#
+# This option specifies the path to the file where SSL private key of API
+# server is stored when SSL is in effect.
+#
+# Possible values:
+#
+# * String representing path to the SSL private key.
+#
+# Related options:
+#
+# * enabled_ssl_apis
+#  (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#ssl_key_file=<None>
+
+#
+# This option sets the value of TCP_KEEPIDLE in seconds for each server socket.
+# It specifies the duration of time to keep connection active. TCP generates a
+# KEEPALIVE transmission for an application that requests to keep connection
+# active. Not supported on OS X.
+#
+# Related options:
+#
+# * keep_alive
+#  (integer value)
+# Minimum value: 0
+# Deprecated group/name - [DEFAULT]/tcp_keepidle
+#tcp_keepidle=600
+
+#
+# This option specifies the size of the pool of greenthreads used by wsgi.
+# It is possible to limit the number of concurrent connections using this
+# option.
+#  (integer value)
+# Minimum value: 0
+# Deprecated group/name - [DEFAULT]/wsgi_default_pool_size
+#default_pool_size=1000
+
+#
+# This option specifies the maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large tokens (typically
+# those generated by the Keystone v3 API with big service catalogs).
+#
+# Since TCP is a stream based protocol, in order to reuse a connection, the HTTP
+# has to have a way to indicate the end of the previous response and beginning
+# of the next. Hence, in a keep_alive case, all messages must have a
+# self-defined message length.
+#  (integer value)
+# Minimum value: 0
+# Deprecated group/name - [DEFAULT]/max_header_line
+#max_header_line=16384
+
+#
+# This option allows using the same TCP connection to send and receive multiple
+# HTTP requests/responses, as opposed to opening a new one for every single
+# request/response pair. HTTP keep-alive indicates HTTP connection reuse.
+#
+# Possible values:
+#
+# * True : reuse HTTP connection.
+# * False : closes the client socket connection explicitly.
+#
+# Related options:
+#
+# * tcp_keepidle
+#  (boolean value)
+# Deprecated group/name - [DEFAULT]/wsgi_keep_alive
+#keep_alive=true
+
+#
+# This option specifies the timeout for client connections' socket operations.
+# If an incoming connection is idle for this number of seconds it will be
+# closed. It indicates timeout on individual read/writes on the socket
+# connection. To wait forever set to 0.
+#  (integer value)
+# Minimum value: 0
+# Deprecated group/name - [DEFAULT]/client_socket_timeout
+#client_socket_timeout=900
+
+
+[xenserver]
+#
+# XenServer options are used when the compute_driver is set to use
+# XenServer (compute_driver=xenapi.XenAPIDriver).
+#
+# Must specify connection_url, connection_password and ovs_integration_bridge to
+# use compute_driver=xenapi.XenAPIDriver.
+
+#
+# From nova.conf
+#
+
+#
+# Number of seconds to wait for agent's reply to a request.
+#
+# Nova configures/performs certain administrative actions on a server with the
+# help of an agent that's installed on the server. The communication between
+# Nova and the agent is achieved via sharing messages, called records, over
+# xenstore, a shared storage across all the domains on a Xenserver host.
+# Operations performed by the agent on behalf of nova are: 'version','
+# key_init',
+# 'password','resetnetwork','inject_file', and 'agentupdate'.
+#
+# To perform one of the above operations, the xapi 'agent' plugin writes the
+# command and its associated parameters to a certain location known to the
+# domain
+# and awaits response. On being notified of the message, the agent performs
+# appropriate actions on the server and writes the result back to xenstore. This
+# result is then read by the xapi 'agent' plugin to determine the
+# success/failure
+# of the operation.
+#
+# This config option determines how long the xapi 'agent' plugin shall wait to
+# read the response off of xenstore for a given request/command. If the agent on
+# the instance fails to write the result in this time period, the operation is
+# considered to have timed out.
+#
+# Related options:
+#
+# * ``agent_version_timeout``
+# * ``agent_resetnetwork_timeout``
+#
+#  (integer value)
+# Minimum value: 0
+#agent_timeout=30
+
+#
+# Number of seconds to wait for agent't reply to version request.
+#
+# This indicates the amount of time xapi 'agent' plugin waits for the agent to
+# respond to the 'version' request specifically. The generic timeout for agent
+# communication ``agent_timeout`` is ignored in this case.
+#
+# During the build process the 'version' request is used to determine if the
+# agent is available/operational to perform other requests such as
+# 'resetnetwork', 'password', 'key_init' and 'inject_file'. If the 'version'
+# call
+# fails, the other configuration is skipped. So, this configuration option can
+# also be interpreted as time in which agent is expected to be fully
+# operational.
+#  (integer value)
+# Minimum value: 0
+#agent_version_timeout=300
+
+#
+# Number of seconds to wait for agent's reply to resetnetwork
+# request.
+#
+# This indicates the amount of time xapi 'agent' plugin waits for the agent to
+# respond to the 'resetnetwork' request specifically. The generic timeout for
+# agent communication ``agent_timeout`` is ignored in this case.
+#  (integer value)
+# Minimum value: 0
+#agent_resetnetwork_timeout=60
+
+#
+# Path to locate guest agent on the server.
+#
+# Specifies the path in which the XenAPI guest agent should be located. If the
+# agent is present, network configuration is not injected into the image.
+#
+# Related options:
+#
+# For this option to have an effect:
+# * ``flat_injected`` should be set to ``True``
+# * ``compute_driver`` should be set to ``xenapi.XenAPIDriver``
+#
+#  (string value)
+#agent_path=usr/sbin/xe-update-networking
+
+#
+# Disables the use of XenAPI agent.
+#
+# This configuration option suggests whether the use of agent should be enabled
+# or not regardless of what image properties are present. Image properties have
+# an effect only when this is set to ``True``. Read description of config option
+# ``use_agent_default`` for more information.
+#
+# Related options:
+#
+# * ``use_agent_default``
+#
+#  (boolean value)
+#disable_agent=false
+
+#
+# Whether or not to use the agent by default when its usage is enabled but not
+# indicated by the image.
+#
+# The use of XenAPI agent can be disabled altogether using the configuration
+# option ``disable_agent``. However, if it is not disabled, the use of an agent
+# can still be controlled by the image in use through one of its properties,
+# ``xenapi_use_agent``. If this property is either not present or specified
+# incorrectly on the image, the use of agent is determined by this configuration
+# option.
+#
+# Note that if this configuration is set to ``True`` when the agent is not
+# present, the boot times will increase significantly.
+#
+# Related options:
+#
+# * ``disable_agent``
+#
+#  (boolean value)
+#use_agent_default=false
+
+# Timeout in seconds for XenAPI login. (integer value)
+# Minimum value: 0
+#login_timeout=10
+
+#
+# Maximum number of concurrent XenAPI connections.
+#
+# In nova, multiple XenAPI requests can happen at a time.
+# Configuring this option will parallelize access to the XenAPI
+# session, which allows you to make concurrent XenAPI connections.
+#  (integer value)
+# Minimum value: 1
+#connection_concurrent=5
+
+# DEPRECATED:
+# Base URL for torrent files; must contain a slash character (see RFC 1808,
+# step 6).
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_base_url=<None>
+
+# DEPRECATED: Probability that peer will become a seeder (1.0 = 100%) (floating
+# point value)
+# Minimum value: 0
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_seed_chance=1.0
+
+# DEPRECATED:
+# Number of seconds after downloading an image via BitTorrent that it should
+# be seeded for other peers.'
+#  (integer value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_seed_duration=3600
+
+# DEPRECATED:
+# Cached torrent files not accessed within this number of seconds can be reaped.
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_max_last_accessed=86400
+
+# DEPRECATED: Beginning of port range to listen on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_listen_port_start=6881
+
+# DEPRECATED: End of port range to listen on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_listen_port_end=6891
+
+# DEPRECATED:
+# Number of seconds a download can remain at the same progress percentage w/o
+# being considered a stall.
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_download_stall_cutoff=600
+
+# DEPRECATED:
+# Maximum number of seeder processes to run concurrently within a given dom0
+# (-1 = no limit).
+#  (integer value)
+# Minimum value: -1
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_max_seeder_processes_per_host=1
+
+#
+# Cache glance images locally.
+#
+# The value for this option must be chosen from the choices listed
+# here. Configuring a value other than these will default to 'all'.
+#
+# Note: There is nothing that deletes these images.
+#
+# Possible values:
+#
+# * `all`: will cache all images.
+# * `some`: will only cache images that have the
+#   image_property `cache_in_nova=True`.
+# * `none`: turns off caching entirely.
+#  (string value)
+# Allowed values: all, some, none
+#cache_images=all
+
+#
+# Compression level for images.
+#
+# By setting this option we can configure the gzip compression level.
+# This option sets GZIP environment variable before spawning tar -cz
+# to force the compression level. It defaults to none, which means the
+# GZIP environment variable is not set and the default (usually -6)
+# is used.
+#
+# Possible values:
+#
+# * Range is 1-9, e.g., 9 for gzip -9, 9 being most
+#   compressed but most CPU intensive on dom0.
+# * Any values out of this range will default to None.
+#  (integer value)
+# Minimum value: 1
+# Maximum value: 9
+#image_compression_level=<None>
+
+# Default OS type used when uploading an image to glance (string value)
+#default_os_type=linux
+
+# Time in secs to wait for a block device to be created (integer value)
+# Minimum value: 1
+#block_device_creation_timeout=10
+
+#
+# Maximum size in bytes of kernel or ramdisk images.
+#
+# Specifying the maximum size of kernel or ramdisk will avoid copying
+# large files to dom0 and fill up /boot/guest.
+#  (integer value)
+#max_kernel_ramdisk_size=16777216
+
+#
+# Filter for finding the SR to be used to install guest instances on.
+#
+# Possible values:
+#
+# * To use the Local Storage in default XenServer/XCP installations
+#   set this flag to other-config:i18n-key=local-storage.
+# * To select an SR with a different matching criteria, you could
+#   set it to other-config:my_favorite_sr=true.
+# * To fall back on the Default SR, as displayed by XenCenter,
+#   set this flag to: default-sr:true.
+#  (string value)
+#sr_matching_filter=default-sr:true
+
+#
+# Whether to use sparse_copy for copying data on a resize down.
+# (False will use standard dd). This speeds up resizes down
+# considerably since large runs of zeros won't have to be rsynced.
+#  (boolean value)
+#sparse_copy=true
+
+#
+# Maximum number of retries to unplug VBD.
+# If set to 0, should try once, no retries.
+#  (integer value)
+# Minimum value: 0
+#num_vbd_unplug_retries=10
+
+#
+# Whether or not to download images via Bit Torrent.
+#
+# The value for this option must be chosen from the choices listed
+# here. Configuring a value other than these will default to 'none'.
+#
+# Possible values:
+#
+# * `all`: will download all images.
+# * `some`: will only download images that have the image_property
+#           `bittorrent=true`.
+# * `none`: will turnoff downloading images via Bit Torrent.
+#  (string value)
+# Allowed values: all, some, none
+#torrent_images=none
+
+#
+# Name of network to use for booting iPXE ISOs.
+#
+# An iPXE ISO is a specially crafted ISO which supports iPXE booting.
+# This feature gives a means to roll your own image.
+#
+# By default this option is not set. Enable this option to
+# boot an iPXE ISO.
+#
+# Related Options:
+#
+# * `ipxe_boot_menu_url`
+# * `ipxe_mkisofs_cmd`
+#  (string value)
+#ipxe_network_name=<None>
+
+#
+# URL to the iPXE boot menu.
+#
+# An iPXE ISO is a specially crafted ISO which supports iPXE booting.
+# This feature gives a means to roll your own image.
+#
+# By default this option is not set. Enable this option to
+# boot an iPXE ISO.
+#
+# Related Options:
+#
+# * `ipxe_network_name`
+# * `ipxe_mkisofs_cmd`
+#  (string value)
+#ipxe_boot_menu_url=<None>
+
+#
+# Name and optionally path of the tool used for ISO image creation.
+#
+# An iPXE ISO is a specially crafted ISO which supports iPXE booting.
+# This feature gives a means to roll your own image.
+#
+# Note: By default `mkisofs` is not present in the Dom0, so the
+# package can either be manually added to Dom0 or include the
+# `mkisofs` binary in the image itself.
+#
+# Related Options:
+#
+# * `ipxe_network_name`
+# * `ipxe_boot_menu_url`
+#  (string value)
+#ipxe_mkisofs_cmd=mkisofs
+
+#
+# URL for connection to XenServer/Xen Cloud Platform. A special value
+# of unix://local can be used to connect to the local unix socket.
+#
+# Possible values:
+#
+# * Any string that represents a URL. The connection_url is
+#   generally the management network IP address of the XenServer.
+# * This option must be set if you chose the XenServer driver.
+#  (string value)
+#connection_url=<None>
+
+# Username for connection to XenServer/Xen Cloud Platform (string value)
+#connection_username=root
+
+# Password for connection to XenServer/Xen Cloud Platform (string value)
+#connection_password=<None>
+
+#
+# The interval used for polling of coalescing vhds.
+#
+# This is the interval after which the task of coalesce VHD is
+# performed, until it reaches the max attempts that is set by
+# vhd_coalesce_max_attempts.
+#
+# Related options:
+#
+# * `vhd_coalesce_max_attempts`
+#  (floating point value)
+# Minimum value: 0
+#vhd_coalesce_poll_interval=5.0
+
+#
+# Ensure compute service is running on host XenAPI connects to.
+# This option must be set to false if the 'independent_compute'
+# option is set to true.
+#
+# Possible values:
+#
+# * Setting this option to true will make sure that compute service
+#   is running on the same host that is specified by connection_url.
+# * Setting this option to false, doesn't perform the check.
+#
+# Related options:
+#
+# * `independent_compute`
+#  (boolean value)
+#check_host=true
+
+#
+# Max number of times to poll for VHD to coalesce.
+#
+# This option determines the maximum number of attempts that can be
+# made for coalescing the VHD before giving up.
+#
+# Related opitons:
+#
+# * `vhd_coalesce_poll_interval`
+#  (integer value)
+# Minimum value: 0
+#vhd_coalesce_max_attempts=20
+
+# Base path to the storage repository on the XenServer host. (string value)
+#sr_base_path=/var/run/sr-mount
+
+#
+# The iSCSI Target Host.
+#
+# This option represents the hostname or ip of the iSCSI Target.
+# If the target host is not present in the connection information from
+# the volume provider then the value from this option is taken.
+#
+# Possible values:
+#
+# * Any string that represents hostname/ip of Target.
+#  (string value)
+#target_host=<None>
+
+#
+# The iSCSI Target Port.
+#
+# This option represents the port of the iSCSI Target. If the
+# target port is not present in the connection information from the
+# volume provider then the value from this option is taken.
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#target_port=3260
+
+# DEPRECATED:
+# Used to enable the remapping of VBD dev.
+# (Works around an issue in Ubuntu Maverick)
+#  (boolean value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option provided a workaround for issues in Ubuntu Maverick, which
+# was released in April 2010 and was dropped from support in April 2012.
+# There's no reason to continue supporting this option.
+#remap_vbd_dev=false
+
+#
+# Specify prefix to remap VBD dev to (ex. /dev/xvdb -> /dev/sdb).
+#
+# Related options:
+#
+# * If `remap_vbd_dev` is set to False this option has no impact.
+#  (string value)
+#remap_vbd_dev_prefix=sd
+
+#
+# Used to prevent attempts to attach VBDs locally, so Nova can
+# be run in a VM on a different host.
+#
+# Related options:
+#
+# * ``CONF.flat_injected`` (Must be False)
+# * ``CONF.xenserver.check_host`` (Must be False)
+# * ``CONF.default_ephemeral_format`` (Must be unset or 'ext3')
+# * Joining host aggregates (will error if attempted)
+# * Swap disks for Windows VMs (will error if attempted)
+# * Nova-based auto_configure_disk (will error if attempted)
+#  (boolean value)
+#independent_compute=false
+
+#
+# Wait time for instances to go to running state.
+#
+# Provide an integer value representing time in seconds to set the
+# wait time for an instance to go to running state.
+#
+# When a request to create an instance is received by nova-api and
+# communicated to nova-compute, the creation of the instance occurs
+# through interaction with Xen via XenAPI in the compute node. Once
+# the node on which the instance(s) are to be launched is decided by
+# nova-schedule and the launch is triggered, a certain amount of wait
+# time is involved until the instance(s) can become available and
+# 'running'. This wait time is defined by running_timeout. If the
+# instances do not go to running state within this specified wait
+# time, the launch expires and the instance(s) are set to 'error'
+# state.
+#  (integer value)
+# Minimum value: 0
+#running_timeout=60
+
+# DEPRECATED:
+# The XenAPI VIF driver using XenServer Network APIs.
+#
+# Provide a string value representing the VIF XenAPI vif driver to use for
+# plugging virtual network interfaces.
+#
+# Xen configuration uses bridging within the backend domain to allow
+# all VMs to appear on the network as individual hosts. Bridge
+# interfaces are used to create a XenServer VLAN network in which
+# the VIFs for the VM instances are plugged. If no VIF bridge driver
+# is plugged, the bridge is not made available. This configuration
+# option takes in a value for the VIF driver.
+#
+# Possible values:
+#
+# * nova.virt.xenapi.vif.XenAPIOpenVswitchDriver (default)
+# * nova.virt.xenapi.vif.XenAPIBridgeDriver (deprecated)
+#
+# Related options:
+#
+# * ``vlan_interface``
+# * ``ovs_integration_bridge``
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# There are only two in-tree vif drivers for XenServer. XenAPIBridgeDriver is
+# for
+# nova-network which is deprecated and XenAPIOpenVswitchDriver is for Neutron
+# which is the default configuration for Nova since the 15.0.0 Ocata release. In
+# the future the "use_neutron" configuration option will be used to determine
+# which vif driver to use.
+#vif_driver=nova.virt.xenapi.vif.XenAPIOpenVswitchDriver
+
+#
+# Dom0 plugin driver used to handle image uploads.
+#
+# Provide a string value representing a plugin driver required to
+# handle the image uploading to GlanceStore.
+#
+# Images, and snapshots from XenServer need to be uploaded to the data
+# store for use. image_upload_handler takes in a value for the Dom0
+# plugin driver. This driver is then called to uplaod images to the
+# GlanceStore.
+#  (string value)
+#image_upload_handler=nova.virt.xenapi.image.glance.GlanceStore
+
+#
+# Number of seconds to wait for SR to settle if the VDI
+# does not exist when first introduced.
+#
+# Some SRs, particularly iSCSI connections are slow to see the VDIs
+# right after they got introduced. Setting this option to a
+# time interval will make the SR to wait for that time period
+# before raising VDI not found exception.
+#  (integer value)
+# Minimum value: 0
+#introduce_vdi_retry_wait=20
+
+#
+# The name of the integration Bridge that is used with xenapi
+# when connecting with Open vSwitch.
+#
+# Note: The value of this config option is dependent on the
+# environment, therefore this configuration value must be set
+# accordingly if you are using XenAPI.
+#
+# Possible values:
+#
+# * Any string that represents a bridge name.
+#  (string value)
+#ovs_integration_bridge=<None>
+
+#
+# When adding new host to a pool, this will append a --force flag to the
+# command, forcing hosts to join a pool, even if they have different CPUs.
+#
+# Since XenServer version 5.6 it is possible to create a pool of hosts that have
+# different CPU capabilities. To accommodate CPU differences, XenServer limited
+# features it uses to determine CPU compatibility to only the ones that are
+# exposed by CPU and support for CPU masking was added.
+# Despite this effort to level differences between CPUs, it is still possible
+# that adding new host will fail, thus option to force join was introduced.
+#  (boolean value)
+#use_join_force=true
+
+#
+# Publicly visible name for this console host.
+#
+# Possible values:
+#
+# * A string representing a valid hostname
+#  (string value)
+# Deprecated group/name - [DEFAULT]/console_public_hostname
+#console_public_hostname=lcy01-22
+
+
+[xvp]
+#
+# Configuration options for XVP.
+#
+# xvp (Xen VNC Proxy) is a proxy server providing password-protected VNC-based
+# access to the consoles of virtual machines hosted on Citrix XenServer.
+
+#
+# From nova.conf
+#
+
+# XVP conf template (string value)
+# Deprecated group/name - [DEFAULT]/console_xvp_conf_template
+#console_xvp_conf_template=$pybasedir/nova/console/xvp.conf.template
+
+# Generated XVP conf file (string value)
+# Deprecated group/name - [DEFAULT]/console_xvp_conf
+#console_xvp_conf=/etc/xvp.conf
+
+# XVP master process pid file (string value)
+# Deprecated group/name - [DEFAULT]/console_xvp_pid
+#console_xvp_pid=/var/run/xvp.pid
+
+# XVP log file (string value)
+# Deprecated group/name - [DEFAULT]/console_xvp_log
+#console_xvp_log=/var/log/xvp.log
+
+# Port for XVP to multiplex VNC connections on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/console_xvp_multiplex_port
+#console_xvp_multiplex_port=5900

2018-09-29 14:50:15,413 [salt.state       :1941][INFO    ][17136] Completed state [/etc/nova/nova.conf] at time 14:50:15.413137 duration_in_ms=463.331
2018-09-29 14:50:15,413 [salt.state       :1770][INFO    ][17136] Running state [/etc/default/nova-compute] at time 14:50:15.413693
2018-09-29 14:50:15,413 [salt.state       :1803][INFO    ][17136] Executing state file.managed for [/etc/default/nova-compute]
2018-09-29 14:50:15,446 [salt.fileclient  :1215][INFO    ][17136] Fetching file from saltenv 'base', ** done ** 'nova/files/default'
2018-09-29 14:50:15,454 [salt.state       :290 ][INFO    ][17136] File changed:
New file
2018-09-29 14:50:15,454 [salt.state       :1941][INFO    ][17136] Completed state [/etc/default/nova-compute] at time 14:50:15.454397 duration_in_ms=40.704
2018-09-29 14:50:15,456 [salt.state       :1770][INFO    ][17136] Running state [nova-compute] at time 14:50:15.456060
2018-09-29 14:50:15,456 [salt.state       :1803][INFO    ][17136] Executing state service.running for [nova-compute]
2018-09-29 14:50:15,456 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemctl', 'status', 'nova-compute.service', '-n', '0'] in directory '/root'
2018-09-29 14:50:15,467 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemctl', 'is-active', 'nova-compute.service'] in directory '/root'
2018-09-29 14:50:15,475 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemctl', 'is-enabled', 'nova-compute.service'] in directory '/root'
2018-09-29 14:50:15,484 [salt.state       :290 ][INFO    ][17136] The service nova-compute is already running
2018-09-29 14:50:15,484 [salt.state       :1941][INFO    ][17136] Completed state [nova-compute] at time 14:50:15.484735 duration_in_ms=28.674
2018-09-29 14:50:15,484 [salt.state       :1770][INFO    ][17136] Running state [nova-compute] at time 14:50:15.484965
2018-09-29 14:50:15,485 [salt.state       :1803][INFO    ][17136] Executing state service.mod_watch for [nova-compute]
2018-09-29 14:50:15,485 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemctl', 'is-active', 'nova-compute.service'] in directory '/root'
2018-09-29 14:50:15,494 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-compute.service'] in directory '/root'
2018-09-29 14:50:15,535 [salt.state       :290 ][INFO    ][17136] {'nova-compute': True}
2018-09-29 14:50:15,535 [salt.state       :1941][INFO    ][17136] Completed state [nova-compute] at time 14:50:15.535332 duration_in_ms=50.367
2018-09-29 14:50:15,536 [salt.state       :1770][INFO    ][17136] Running state [/etc/default/libvirtd] at time 14:50:15.535966
2018-09-29 14:50:15,536 [salt.state       :1803][INFO    ][17136] Executing state file.managed for [/etc/default/libvirtd]
2018-09-29 14:50:15,568 [salt.fileclient  :1215][INFO    ][17136] Fetching file from saltenv 'base', ** done ** 'nova/files/pike/libvirt.Debian'
2018-09-29 14:50:15,578 [salt.state       :290 ][INFO    ][17136] File changed:
--- 
+++ 
@@ -1,17 +1,13 @@
-# Defaults for libvirtd initscript (/etc/init.d/libvirtd)
+# Defaults for libvirt-bin initscript (/etc/init.d/libvirt-bin)
 # This is a POSIX shell fragment
 
 # Start libvirtd to handle qemu/kvm:
 start_libvirtd="yes"
 
 # options passed to libvirtd, add "-l" to listen on tcp
-#libvirtd_opts=""
-
+# Don't use "-d" option with systemd
+libvirtd_opts="-l"
+LIBVIRTD_ARGS="--listen"
 # pass in location of kerberos keytab
 #export KRB5_KTNAME=/etc/libvirt/libvirt.keytab
 
-# Whether to mount a systemd like cgroup layout (only
-# useful when not running systemd)
-#mount_cgroups=yes
-# Which cgroups to mount
-#cgroups="memory devices"

2018-09-29 14:50:15,578 [salt.state       :1941][INFO    ][17136] Completed state [/etc/default/libvirtd] at time 14:50:15.578707 duration_in_ms=42.741
2018-09-29 14:50:15,579 [salt.state       :1770][INFO    ][17136] Running state [service.systemctl_reload] at time 14:50:15.579809
2018-09-29 14:50:15,580 [salt.state       :1803][INFO    ][17136] Executing state module.wait for [service.systemctl_reload]
2018-09-29 14:50:15,580 [salt.state       :290 ][INFO    ][17136] No changes made for service.systemctl_reload
2018-09-29 14:50:15,580 [salt.state       :1941][INFO    ][17136] Completed state [service.systemctl_reload] at time 14:50:15.580344 duration_in_ms=0.535
2018-09-29 14:50:15,580 [salt.state       :1770][INFO    ][17136] Running state [service.systemctl_reload] at time 14:50:15.580485
2018-09-29 14:50:15,580 [salt.state       :1803][INFO    ][17136] Executing state module.mod_watch for [service.systemctl_reload]
2018-09-29 14:50:15,581 [salt.utils.decorators:613 ][WARNING ][17136] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-09-29 14:50:15,581 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-09-29 14:50:15,656 [salt.state       :290 ][INFO    ][17136] {'ret': True}
2018-09-29 14:50:15,657 [salt.state       :1941][INFO    ][17136] Completed state [service.systemctl_reload] at time 14:50:15.657315 duration_in_ms=76.829
2018-09-29 14:50:15,657 [salt.state       :1770][INFO    ][17136] Running state [/etc/libvirt/qemu.conf] at time 14:50:15.657933
2018-09-29 14:50:15,658 [salt.state       :1803][INFO    ][17136] Executing state file.managed for [/etc/libvirt/qemu.conf]
2018-09-29 14:50:15,685 [salt.fileclient  :1215][INFO    ][17136] Fetching file from saltenv 'base', ** done ** 'nova/files/pike/qemu.conf.Debian'
2018-09-29 14:50:15,832 [salt.state       :290 ][INFO    ][17136] File changed:
--- 
+++ 
@@ -1,61 +1,8 @@
+
 # Master configuration file for the QEMU driver.
 # All settings described here are optional - if omitted, sensible
 # defaults are used.
 
-# Use of TLS requires that x509 certificates be issued. The default is
-# to keep them in /etc/pki/qemu. This directory must contain
-#
-#  ca-cert.pem - the CA master certificate
-#  server-cert.pem - the server certificate signed with ca-cert.pem
-#  server-key.pem  - the server private key
-#
-# and optionally may contain
-#
-#  dh-params.pem - the DH params configuration file
-#
-# If the directory does not exist, libvirtd will fail to start. If the
-# directory doesn't contain the necessary files, QEMU domains will fail
-# to start if they are configured to use TLS.
-#
-# In order to overwrite the default path alter the following. This path
-# definition will be used as the default path for other *_tls_x509_cert_dir
-# configuration settings if their default path does not exist or is not
-# specifically set.
-#
-#default_tls_x509_cert_dir = "/etc/pki/qemu"
-
-
-# The default TLS configuration only uses certificates for the server
-# allowing the client to verify the server's identity and establish
-# an encrypted channel.
-#
-# It is possible to use x509 certificates for authentication too, by
-# issuing an x509 certificate to every client who needs to connect.
-#
-# Enabling this option will reject any client who does not have a
-# certificate signed by the CA in /etc/pki/qemu/ca-cert.pem
-#
-# The default_tls_x509_cert_dir directory must also contain
-#
-#  client-cert.pem - the client certificate signed with the ca-cert.pem
-#  client-key.pem - the client private key
-#
-#default_tls_x509_verify = 1
-
-#
-# Libvirt assumes the server-key.pem file is unencrypted by default.
-# To use an encrypted server-key.pem file, the password to decrypt
-# the PEM file is required. This can be provided by creating a secret
-# object in libvirt and then to uncomment this setting to set the UUID
-# of the secret.
-#
-# NB This default all-zeros UUID will not work. Replace it with the
-# output from the UUID for the TLS secret from a 'virsh secret-list'
-# command and then uncomment the entry
-#
-#default_tls_x509_secret_uuid = "00000000-0000-0000-0000-000000000000"
-
-
 # VNC is configured to listen on 127.0.0.1 by default.
 # To make it listen on all public interfaces, uncomment
 # this next option.
@@ -69,9 +16,9 @@
 # unix socket. This prevents unprivileged access from users on the
 # host machine, though most VNC clients do not support it.
 #
-# This will only be enabled for VNC configurations that have listen
-# type=address but without any address specified. This setting takes
-# preference over vnc_listen.
+# This will only be enabled for VNC configurations that do not have
+# a hardcoded 'listen' or 'socket' value. This setting takes preference
+# over vnc_listen.
 #
 #vnc_auto_unix_socket = 1
 
@@ -86,11 +33,15 @@
 #vnc_tls = 1
 
 
-# In order to override the default TLS certificate location for
-# vnc certificates, supply a valid path to the certificate directory.
-# If the provided path does not exist, libvirtd will fail to start.
-# If the path is not provided, but vnc_tls = 1, then the
-# default_tls_x509_cert_dir path will be used.
+# Use of TLS requires that x509 certificates be issued. The
+# default it to keep them in /etc/pki/libvirt-vnc. This directory
+# must contain
+#
+#  ca-cert.pem - the CA master certificate
+#  server-cert.pem - the server certificate signed with ca-cert.pem
+#  server-key.pem  - the server private key
+#
+# This option allows the certificate directory to be changed
 #
 #vnc_tls_x509_cert_dir = "/etc/pki/libvirt-vnc"
 
@@ -100,15 +51,10 @@
 # an encrypted channel.
 #
 # It is possible to use x509 certificates for authentication too, by
-# issuing an x509 certificate to every client who needs to connect.
-#
-# Enabling this option will reject any client that does not have a
-# ca-cert.pem certificate signed by the CA in the vnc_tls_x509_cert_dir
-# (or default_tls_x509_cert_dir) as well as the corresponding client-*.pem
-# files described in default_tls_x509_cert_dir.
-#
-# If this option is not supplied, it will be set to the value of
-# "default_tls_x509_verify".
+# issuing a x509 certificate to every client who needs to connect.
+#
+# Enabling this option will reject any client who does not have a
+# certificate signed by the CA in /etc/pki/libvirt-vnc/ca-cert.pem
 #
 #vnc_tls_x509_verify = 1
 
@@ -172,24 +118,17 @@
 #spice_tls = 1
 
 
-# In order to override the default TLS certificate location for
-# spice certificates, supply a valid path to the certificate directory.
-# If the provided path does not exist, libvirtd will fail to start.
-# If the path is not provided, but spice_tls = 1, then the
-# default_tls_x509_cert_dir path will be used.
+# Use of TLS requires that x509 certificates be issued. The
+# default it to keep them in /etc/pki/libvirt-spice. This directory
+# must contain
+#
+#  ca-cert.pem - the CA master certificate
+#  server-cert.pem - the server certificate signed with ca-cert.pem
+#  server-key.pem  - the server private key
+#
+# This option allows the certificate directory to be changed.
 #
 #spice_tls_x509_cert_dir = "/etc/pki/libvirt-spice"
-
-
-# Enable this option to have SPICE served over an automatically created
-# unix socket. This prevents unprivileged access from users on the
-# host machine.
-#
-# This will only be enabled for SPICE configurations that have listen
-# type=address but without any address specified. This setting takes
-# preference over spice_listen.
-#
-#spice_auto_unix_socket = 1
 
 
 # The default SPICE password. This parameter is only used if the
@@ -216,123 +155,6 @@
 # point to the directory, and create a qemu.conf in that location
 #
 #spice_sasl_dir = "/some/directory/sasl2"
-
-# Enable use of TLS encryption on the chardev TCP transports.
-#
-# It is necessary to setup CA and issue a server certificate
-# before enabling this.
-#
-#chardev_tls = 1
-
-
-# In order to override the default TLS certificate location for character
-# device TCP certificates, supply a valid path to the certificate directory.
-# If the provided path does not exist, libvirtd will fail to start.
-# If the path is not provided, but chardev_tls = 1, then the
-# default_tls_x509_cert_dir path will be used.
-#
-#chardev_tls_x509_cert_dir = "/etc/pki/libvirt-chardev"
-
-
-# The default TLS configuration only uses certificates for the server
-# allowing the client to verify the server's identity and establish
-# an encrypted channel.
-#
-# It is possible to use x509 certificates for authentication too, by
-# issuing an x509 certificate to every client who needs to connect.
-#
-# Enabling this option will reject any client that does not have a
-# ca-cert.pem certificate signed by the CA in the chardev_tls_x509_cert_dir
-# (or default_tls_x509_cert_dir) as well as the corresponding client-*.pem
-# files described in default_tls_x509_cert_dir.
-#
-# If this option is not supplied, it will be set to the value of
-# "default_tls_x509_verify".
-#
-#chardev_tls_x509_verify = 1
-
-
-# Uncomment and use the following option to override the default secret
-# UUID provided in the default_tls_x509_secret_uuid parameter.
-#
-# NB This default all-zeros UUID will not work. Replace it with the
-# output from the UUID for the TLS secret from a 'virsh secret-list'
-# command and then uncomment the entry
-#
-#chardev_tls_x509_secret_uuid = "00000000-0000-0000-0000-000000000000"
-
-
-# Enable use of TLS encryption for all VxHS network block devices that
-# don't specifically disable.
-#
-# When the VxHS network block device server is set up appropriately,
-# x509 certificates are required for authentication between the clients
-# (qemu processes) and the remote VxHS server.
-#
-# It is necessary to setup CA and issue the client certificate before
-# enabling this.
-#
-#vxhs_tls = 1
-
-
-# In order to override the default TLS certificate location for VxHS
-# backed storage, supply a valid path to the certificate directory.
-# This is used to authenticate the VxHS block device clients to the VxHS
-# server.
-#
-# If the provided path does not exist, libvirtd will fail to start.
-# If the path is not provided, but vxhs_tls = 1, then the
-# default_tls_x509_cert_dir path will be used.
-#
-# VxHS block device clients expect the client certificate and key to be
-# present in the certificate directory along with the CA master certificate.
-# If using the default environment, default_tls_x509_verify must be configured.
-# Since this is only a client the server-key.pem certificate is not needed.
-# Thus a VxHS directory must contain the following:
-#
-#  ca-cert.pem - the CA master certificate
-#  client-cert.pem - the client certificate signed with the ca-cert.pem
-#  client-key.pem - the client private key
-#
-#vxhs_tls_x509_cert_dir = "/etc/pki/libvirt-vxhs"
-
-
-# In order to override the default TLS certificate location for migration
-# certificates, supply a valid path to the certificate directory. If the
-# provided path does not exist, libvirtd will fail to start. If the path is
-# not provided, but migrate_tls = 1, then the default_tls_x509_cert_dir path
-# will be used. Once/if a default certificate is enabled/defined, migration
-# will then be able to use the certificate via migration API flags.
-#
-#migrate_tls_x509_cert_dir = "/etc/pki/libvirt-migrate"
-
-
-# The default TLS configuration only uses certificates for the server
-# allowing the client to verify the server's identity and establish
-# an encrypted channel.
-#
-# It is possible to use x509 certificates for authentication too, by
-# issuing an x509 certificate to every client who needs to connect.
-#
-# Enabling this option will reject any client that does not have a
-# ca-cert.pem certificate signed by the CA in the migrate_tls_x509_cert_dir
-# (or default_tls_x509_cert_dir) as well as the corresponding client-*.pem
-# files described in default_tls_x509_cert_dir.
-#
-# If this option is not supplied, it will be set to the value of
-# "default_tls_x509_verify".
-#
-#migrate_tls_x509_verify = 1
-
-
-# Uncomment and use the following option to override the default secret
-# UUID provided in the default_tls_x509_secret_uuid parameter.
-#
-# NB This default all-zeros UUID will not work. Replace it with the
-# output from the UUID for the TLS secret from a 'virsh secret-list'
-# command and then uncomment the entry
-#
-#migrate_tls_x509_secret_uuid = "00000000-0000-0000-0000-000000000000"
 
 
 # By default, if no graphical front end is configured, libvirt will disable
@@ -416,10 +238,9 @@
 # Set to 0 to disable file ownership changes.
 #dynamic_ownership = 1
 
-
 # What cgroup controllers to make use of with QEMU guests
 #
-#  - 'cpu' - use for scheduler tunables
+#  - 'cpu' - use for schedular tunables
 #  - 'devices' - use for device whitelisting
 #  - 'memory' - use for memory tunables
 #  - 'blkio' - use for block devices I/O tunables
@@ -451,19 +272,11 @@
 #    "/dev/null", "/dev/full", "/dev/zero",
 #    "/dev/random", "/dev/urandom",
 #    "/dev/ptmx", "/dev/kvm", "/dev/kqemu",
-#    "/dev/rtc","/dev/hpet"
+#    "/dev/rtc","/dev/hpet", "/dev/vfio/vfio"
 #]
-#
-# RDMA migration requires the following extra files to be added to the list:
-#   "/dev/infiniband/rdma_cm",
-#   "/dev/infiniband/issm0",
-#   "/dev/infiniband/issm1",
-#   "/dev/infiniband/umad0",
-#   "/dev/infiniband/umad1",
-#   "/dev/infiniband/uverbs0"
-
-
-# The default format for QEMU/KVM guest save images is raw; that is, the
+
+
+# The default format for Qemu/KVM guest save images is raw; that is, the
 # memory from the domain is dumped out directly to a file.  If you have
 # guests with a large amount of memory, however, this can take up quite
 # a bit of space.  If you would like to compress the images while they
@@ -517,20 +330,15 @@
 # unspecified here, determination of a host mount point in /proc/mounts
 # will be attempted.  Specifying an explicit mount overrides detection
 # of the same in /proc/mounts.  Setting the mount point to "" will
-# disable guest hugepage backing. If desired, multiple mount points can
-# be specified at once, separated by comma and enclosed in square
-# brackets, for example:
-#
-#     hugetlbfs_mount = ["/dev/hugepages2M", "/dev/hugepages1G"]
-#
-# The size of huge page served by specific mount point is determined by
-# libvirt at the daemon startup.
-#
-# NB, within these mount points, guests will create memory backing
-# files in a location of $MOUNTPOINT/libvirt/qemu
+# disable guest hugepage backing.
+#
+# NB, within this mount point, guests will create memory backing files
+# in a location of $MOUNTPOINT/libvirt/qemu
 #
 #hugetlbfs_mount = "/dev/hugepages"
-
+#hugetlbfs_mount = ["/run/hugepages/kvm", "/mnt/hugepages_1GB"]
+hugetlbfs_mount = ["/mnt/hugepages_1G"]
+security_driver="none"
 
 # Path to the setuid helper for creating tap devices.  This executable
 # is used to create <source type='bridge'> interfaces when libvirtd is
@@ -566,42 +374,6 @@
 # The same applies to max_files which sets the limit on the maximum
 # number of opened files.
 #
-#max_processes = 0
-#max_files = 0
-
-# If max_core is set to a non-zero integer, then QEMU will be
-# permitted to create core dumps when it crashes, provided its
-# RAM size is smaller than the limit set.
-#
-# Be warned that the core dump will include a full copy of the
-# guest RAM, if the 'dump_guest_core' setting has been enabled,
-# or if the guest XML contains
-#
-#   <memory dumpcore="on">...guest ram...</memory>
-#
-# If guest RAM is to be included, ensure the max_core limit
-# is set to at least the size of the largest expected guest
-# plus another 1GB for any QEMU host side memory mappings.
-#
-# As a special case it can be set to the string "unlimited" to
-# to allow arbitrarily sized core dumps.
-#
-# By default the core dump size is set to 0 disabling all dumps
-#
-# Size is a positive integer specifying bytes or the
-# string "unlimited"
-#
-#max_core = "unlimited"
-
-# Determine if guest RAM is included in QEMU core dumps. By
-# default guest RAM will be excluded if a new enough QEMU is
-# present. Setting this to '1' will force guest RAM to always
-# be included in QEMU core dumps.
-#
-# This setting will be ignored if the guest XML has set the
-# dumpcore attribute on the <memory> element.
-#
-#dump_guest_core = 1
 
 # mac_filter enables MAC addressed based filtering on bridge ports.
 # This currently requires ebtables to be installed.
@@ -628,13 +400,11 @@
 #allow_disk_format_probing = 1
 
 
-# In order to prevent accidentally starting two domains that
-# share one writable disk, libvirt offers two approaches for
-# locking files. The first one is sanlock, the other one,
-# virtlockd, is then our own implementation. Accepted values
-# are "sanlock" and "lockd".
-#
-#lock_manager = "lockd"
+# To enable 'Sanlock' project based locking of the file
+# content (to prevent two VMs writing to the same
+# disk), uncomment this
+#
+#lock_manager = "sanlock"
 
 
 
@@ -676,17 +446,10 @@
 #seccomp_sandbox = 1
 
 
+
 # Override the listen address for all incoming migrations. Defaults to
 # 0.0.0.0, or :: if both host and qemu are capable of IPv6.
-#migration_address = "0.0.0.0"
-
-
-# The default hostname or IP address which will be used by a migration
-# source for transferring migration data to this host.  The migration
-# source has to be able to resolve this hostname and connect to it so
-# setting "localhost" will not work.  By default, the host's configured
-# hostname is used.
-#migration_host = "host.example.com"
+#migration_address = "127.0.0.1"
 
 
 # Override the port range used for incoming migrations.
@@ -698,36 +461,12 @@
 #
 #migration_port_min = 49152
 #migration_port_max = 49215
-
-
-
-# Timestamp QEMU's log messages (if QEMU supports it)
-#
-# Defaults to 1.
-#
-#log_timestamp = 0
-
-
-# Location of master nvram file
-#
-# When a domain is configured to use UEFI instead of standard
-# BIOS it may use a separate storage for UEFI variables. If
-# that's the case libvirt creates the variable store per domain
-# using this master file as image. Each UEFI firmware can,
-# however, have different variables store. Therefore the nvram is
-# a list of strings when a single item is in form of:
-#   ${PATH_TO_UEFI_FW}:${PATH_TO_UEFI_VARS}.
-# Later, when libvirt creates per domain variable store, this list is
-# searched for the master image. The UEFI firmware can be called
-# differently for different guest architectures. For instance, it's OVMF
-# for x86_64 and i686, but it's AAVMF for aarch64. The libvirt default
-# follows this scheme.
-#nvram = [
-#   "/usr/share/OVMF/OVMF_CODE.fd:/usr/share/OVMF/OVMF_VARS.fd",
-#   "/usr/share/OVMF/OVMF_CODE.secboot.fd:/usr/share/OVMF/OVMF_VARS.fd",
-#   "/usr/share/AAVMF/AAVMF_CODE.fd:/usr/share/AAVMF/AAVMF_VARS.fd",
-#   "/usr/share/AAVMF/AAVMF32_CODE.fd:/usr/share/AAVMF/AAVMF32_VARS.fd"
-#]
+cgroup_device_acl = [
+    "/dev/null", "/dev/full", "/dev/zero",
+    "/dev/random", "/dev/urandom",
+    "/dev/ptmx", "/dev/kvm", "/dev/kqemu",
+    "/dev/rtc", "/dev/hpet","/dev/net/tun",
+]
 
 # The backend to use for handling stdout/stderr output from
 # QEMU processes.
@@ -743,41 +482,3 @@
 #          rollover when a size limit is hit.
 #
 #stdio_handler = "logd"
-
-# QEMU gluster libgfapi log level, debug levels are 0-9, with 9 being the
-# most verbose, and 0 representing no debugging output.
-#
-# The current logging levels defined in the gluster GFAPI are:
-#
-#    0 - None
-#    1 - Emergency
-#    2 - Alert
-#    3 - Critical
-#    4 - Error
-#    5 - Warning
-#    6 - Notice
-#    7 - Info
-#    8 - Debug
-#    9 - Trace
-#
-# Defaults to 4
-#
-#gluster_debug_level = 9
-
-# To enhance security, QEMU driver is capable of creating private namespaces
-# for each domain started. Well, so far only "mount" namespace is supported. If
-# enabled it means qemu process is unable to see all the devices on the system,
-# only those configured for the domain in question. Libvirt then manages
-# devices entries throughout the domain lifetime. This namespace is turned on
-# by default.
-#namespaces = [ "mount" ]
-
-# This directory is used for memoryBacking source if configured as file.
-# NOTE: big files will be stored here
-#memory_backing_dir = "/var/lib/libvirt/qemu/ram"
-
-# The following two values set the default RX/TX ring buffer size for virtio
-# interfaces. These values are taken unless overridden in domain XML. For more
-# info consult docs to corresponding attributes from domain XML.
-#rx_queue_size = 1024
-#tx_queue_size = 1024

2018-09-29 14:50:15,832 [salt.state       :1941][INFO    ][17136] Completed state [/etc/libvirt/qemu.conf] at time 14:50:15.832494 duration_in_ms=174.561
2018-09-29 14:50:15,833 [salt.state       :1770][INFO    ][17136] Running state [/etc/libvirt/libvirtd.conf] at time 14:50:15.832974
2018-09-29 14:50:15,833 [salt.state       :1803][INFO    ][17136] Executing state file.managed for [/etc/libvirt/libvirtd.conf]
2018-09-29 14:50:15,855 [salt.fileclient  :1215][INFO    ][17136] Fetching file from saltenv 'base', ** done ** 'nova/files/pike/libvirtd.conf.Debian'
2018-09-29 14:50:15,998 [salt.state       :290 ][INFO    ][17136] File changed:
--- 
+++ 
@@ -1,6 +1,7 @@
+
 # Master libvirt daemon configuration file
 #
-# For further information consult https://libvirt.org/format.html
+# For further information consult http://libvirt.org/format.html
 #
 # NOTE: the tests/daemon-conf regression test script requires
 # that each "PARAMETER = VALUE" line in this file have the parameter
@@ -18,8 +19,9 @@
 # It is necessary to setup a CA and issue server certificates before
 # using this capability.
 #
+
 # This is enabled by default, uncomment this to disable it
-#listen_tls = 0
+listen_tls = 0
 
 # Listen for unencrypted TCP connections on the public TCP/IP port.
 # NB, must pass the --listen flag to the libvirtd process for this to
@@ -33,6 +35,7 @@
 #listen_tcp = 1
 
 
+listen_tcp = 1
 
 # Override the port for accepting secure TLS connections
 # This can be a port number, or service name
@@ -48,10 +51,6 @@
 # Override the default configuration which binds to all network
 # interfaces. This can be a numeric IPv4/6 address, or hostname
 #
-# If the libvirtd service is started in parallel with network
-# startup (e.g. with systemd), binding to addresses other than
-# the wildcards (0.0.0.0/::) might not be available yet.
-#
 #listen_addr = "192.168.0.1"
 
 
@@ -67,7 +66,7 @@
 # unique on the immediate broadcast network.
 #
 # The default is "Virtualization Host HOSTNAME", where HOSTNAME
-# is substituted for the short hostname of the machine (without domain)
+# is subsituted for the short hostname of the machine (without domain)
 #
 #mdns_name = "Virtualization Host Joe Demo"
 
@@ -82,13 +81,14 @@
 # without becoming root.
 #
 # This is restricted to 'root' by default.
-unix_sock_group = "libvirt"
+unix_sock_group = "libvirtd"
 
 # Set the UNIX socket permissions for the R/O socket. This is used
 # for monitoring VM status only
 #
-# Default allows any user. If setting group ownership, you may want to
-# restrict this too.
+# Default allows any user. If setting group ownership may want to
+# restrict this to:
+#unix_sock_ro_perms = "0777"
 unix_sock_ro_perms = "0777"
 
 # Set the UNIX socket permissions for the R/W socket. This is used
@@ -98,19 +98,11 @@
 # the default will change to allow everyone (eg, 0777)
 #
 # If not using PolicyKit and setting group ownership for access
-# control, then you may want to relax this too.
+# control then you may want to relax this to:
 unix_sock_rw_perms = "0770"
-
-# Set the UNIX socket permissions for the admin interface socket.
-#
-# Default allows only owner (root), do not change it unless you are
-# sure to whom you are exposing the access to.
-#unix_sock_admin_perms = "0700"
 
 # Set the name of the directory in which sockets will be found/created.
 #unix_sock_dir = "/var/run/libvirt"
-
-
 
 #################################################################
 #
@@ -125,7 +117,7 @@
 #  - sasl: use SASL infrastructure. The actual auth scheme is then
 #          controlled from /etc/sasl2/libvirt.conf. For the TCP
 #          socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
-#          For non-TCP or TLS sockets, any scheme is allowed.
+#          For non-TCP or TLS sockets,  any scheme is allowed.
 #
 #  - polkit: use PolicyKit to authenticate. This is only suitable
 #            for use on the UNIX sockets. The default policy will
@@ -156,6 +148,8 @@
 # use, always enable SASL and use the GSSAPI or DIGEST-MD5
 # mechanism in /etc/sasl2/libvirt.conf
 #auth_tcp = "sasl"
+#auth_tcp = "none"
+auth_tcp = "none"
 
 # Change the authentication scheme for TLS sockets.
 #
@@ -167,15 +161,6 @@
 #auth_tls = "none"
 
 
-# Change the API access control scheme
-#
-# By default an authenticated user is allowed access
-# to all APIs. Access drivers can place restrictions
-# on this. By default the 'nop' driver is enabled,
-# meaning no access control checks are done once a
-# client has authenticated with libvirtd
-#
-#access_drivers = [ "polkit" ]
 
 #################################################################
 #
@@ -228,7 +213,7 @@
 #tls_no_verify_certificate = 1
 
 
-# A whitelist of allowed x509 Distinguished Names
+# A whitelist of allowed x509  Distinguished Names
 # This list may contain wildcards such as
 #
 #    "C=GB,ST=London,L=London,O=Red Hat,CN=*"
@@ -242,7 +227,7 @@
 #tls_allowed_dn_list = ["DN1", "DN2"]
 
 
-# A whitelist of allowed SASL usernames. The format for username
+# A whitelist of allowed SASL usernames. The format for usernames
 # depends on the SASL authentication mechanism. Kerberos usernames
 # look like username@REALM
 #
@@ -259,13 +244,6 @@
 #sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ]
 
 
-# Override the compile time default TLS priority string. The
-# default is usually "NORMAL" unless overridden at build time.
-# Only set this is it is desired for libvirt to deviate from
-# the global default settings.
-#
-#tls_priority="NORMAL"
-
 
 #################################################################
 #
@@ -274,22 +252,12 @@
 
 # The maximum number of concurrent client connections to allow
 # over all sockets combined.
-#max_clients = 5000
-
-# The maximum length of queue of connections waiting to be
-# accepted by the daemon. Note, that some protocols supporting
-# retransmission may obey this so that a later reattempt at
-# connection succeeds.
-#max_queued_clients = 1000
-
-# The maximum length of queue of accepted but not yet
-# authenticated clients. The default value is 20. Set this to
-# zero to turn this feature off.
-#max_anonymous_clients = 20
+#max_clients = 20
+
 
 # The minimum limit sets the number of workers to start up
 # initially. If the number of active clients exceeds this,
-# then more threads are spawned, up to max_workers limit.
+# then more threads are spawned, upto max_workers limit.
 # Typically you'd want max_workers to equal maximum number
 # of clients allowed
 #min_workers = 5
@@ -297,25 +265,25 @@
 
 
 # The number of priority workers. If all workers from above
-# pool are stuck, some calls marked as high priority
+# pool will stuck, some calls marked as high priority
 # (notably domainDestroy) can be executed in this pool.
 #prio_workers = 5
 
+# Total global limit on concurrent RPC calls. Should be
+# at least as large as max_workers. Beyond this, RPC requests
+# will be read into memory and queued. This directly impact
+# memory usage, currently each request requires 256 KB of
+# memory. So by default upto 5 MB of memory is used
+#
+# XXX this isn't actually enforced yet, only the per-client
+# limit is used so far
+#max_requests = 20
+
 # Limit on concurrent requests from a single client
 # connection. To avoid one client monopolizing the server
-# this should be a small fraction of the global max_workers
-# parameter.
+# this should be a small fraction of the global max_requests
+# and max_workers parameter
 #max_client_requests = 5
-
-# Same processing controls, but this time for the admin interface.
-# For description of each option, be so kind to scroll few lines
-# upwards.
-
-#admin_min_workers = 1
-#admin_max_workers = 5
-#admin_max_clients = 5
-#admin_max_queued_clients = 5
-#admin_max_client_requests = 5
 
 #################################################################
 #
@@ -324,34 +292,23 @@
 
 # Logging level: 4 errors, 3 warnings, 2 information, 1 debug
 # basically 1 will log everything possible
-# Note: Journald may employ rate limiting of the messages logged
-# and thus lock up the libvirt daemon. To use the debug level with
-# journald you have to specify it explicitly in 'log_outputs', otherwise
-# only information level messages will be logged.
 #log_level = 3
-
 # Logging filters:
 # A filter allows to select a different logging level for a given category
 # of logs
 # The format for a filter is one of:
 #    x:name
 #    x:+name
-
-#      where name is a string which is matched against the category
-#      given in the VIR_LOG_INIT() at the top of each libvirt source
-#      file, e.g., "remote", "qemu", or "util.json" (the name in the
-#      filter can be a substring of the full category name, in order
-#      to match multiple similar categories), the optional "+" prefix
-#      tells libvirt to log stack trace for each message matching
-#      name, and x is the minimal level where matching messages should
-#      be logged:
-
+#      where name is a string which is matched against source file name,
+#      e.g., "remote", "qemu", or "util/json", the optional "+" prefix
+#      tells libvirt to log stack trace for each message matching name,
+#      and x is the minimal level where matching messages should be logged:
 #    1: DEBUG
 #    2: INFO
 #    3: WARNING
 #    4: ERROR
 #
-# Multiple filters can be defined in a single @filters, they just need to be
+# Multiple filter can be defined in a single @filters, they just need to be
 # separated by spaces.
 #
 # e.g. to only get warning or errors from the remote layer and only errors
@@ -367,26 +324,23 @@
 #      use syslog for the output and use the given name as the ident
 #    x:file:file_path
 #      output to a file, with the given filepath
-#    x:journald
-#      output to journald logging system
 # In all case the x prefix is the minimal level, acting as a filter
 #    1: DEBUG
 #    2: INFO
 #    3: WARNING
 #    4: ERROR
 #
-# Multiple outputs can be defined, they just need to be separated by spaces.
+# Multiple output can be defined, they just need to be separated by spaces.
 # e.g. to log all warnings and errors to syslog under the libvirtd ident:
 #log_outputs="3:syslog:libvirtd"
 #
 
-# Log debug buffer size:
-#
-# This configuration option is no longer used, since the global
-# log buffer functionality has been removed. Please configure
-# suitable log_outputs/log_filters settings to obtain logs.
+# Log debug buffer size: default 64
+# The daemon keeps an internal debug log buffer which will be dumped in case
+# of crash or upon receiving a SIGUSR2 signal. This setting allows to override
+# the default buffer size in kilobytes.
+# If value is 0 or less the debug log buffer is deactivated
 #log_buffer_size = 64
-
 
 ##################################################################
 #
@@ -407,16 +361,10 @@
 
 ###################################################################
 # UUID of the host:
-# Host UUID is read from one of the sources specified in host_uuid_source.
-#
-# - 'smbios': fetch the UUID from 'dmidecode -s system-uuid'
-# - 'machine-id': fetch the UUID from /etc/machine-id
-#
-# The host_uuid_source default is 'smbios'. If 'dmidecode' does not provide
-# a valid UUID a temporary UUID will be generated.
-#
-# Another option is to specify host UUID in host_uuid.
-#
+# Provide the UUID of the host here in case the command
+# 'dmidecode -s system-uuid' does not provide a valid uuid. In case
+# 'dmidecode' does not provide a valid UUID and none is provided here, a
+# temporary UUID will be generated.
 # Keep the format of the example UUID below. UUID must not have all digits
 # be the same.
 
@@ -424,12 +372,11 @@
 # it with the output of the 'uuidgen' command and then
 # uncomment this entry
 #host_uuid = "00000000-0000-0000-0000-000000000000"
-#host_uuid_source = "smbios"
 
 ###################################################################
 # Keepalive protocol:
 # This allows libvirtd to detect broken client connections or even
-# dead clients.  A keepalive message is sent to a client after
+# dead client.  A keepalive message is sent to a client after
 # keepalive_interval seconds of inactivity to check if the client is
 # still responding; keepalive_count is a maximum number of keepalive
 # messages that are allowed to be sent to the client without getting
@@ -438,31 +385,15 @@
 # keepalive_interval * (keepalive_count + 1) seconds since the last
 # message received from the client.  If keepalive_interval is set to
 # -1, libvirtd will never send keepalive requests; however clients
-# can still send them and the daemon will send responses.  When
+# can still send them and the deamon will send responses.  When
 # keepalive_count is set to 0, connections will be automatically
 # closed after keepalive_interval seconds of inactivity without
 # sending any keepalive messages.
 #
 #keepalive_interval = 5
 #keepalive_count = 5
-
-#
-# These configuration options are no longer used.  There is no way to
-# restrict such clients from connecting since they first need to
-# connect in order to ask for keepalive.
+#
+# If set to 1, libvirtd will refuse to talk to clients that do not
+# support keepalive protocol.  Defaults to 0.
 #
 #keepalive_required = 1
-#admin_keepalive_required = 1
-
-# Keepalive settings for the admin interface
-#admin_keepalive_interval = 5
-#admin_keepalive_count = 5
-
-###################################################################
-# Open vSwitch:
-# This allows to specify a timeout for openvswitch calls made by
-# libvirt. The ovs-vsctl utility is used for the configuration and
-# its timeout option is set by default to 5 seconds to avoid
-# potential infinite waits blocking libvirt.
-#
-#ovs_timeout = 5

2018-09-29 14:50:15,999 [salt.state       :1941][INFO    ][17136] Completed state [/etc/libvirt/libvirtd.conf] at time 14:50:15.999229 duration_in_ms=166.255
2018-09-29 14:50:16,000 [salt.state       :1770][INFO    ][17136] Running state [virsh net-destroy default] at time 14:50:16.000804
2018-09-29 14:50:16,001 [salt.state       :1803][INFO    ][17136] Executing state cmd.run for [virsh net-destroy default]
2018-09-29 14:50:16,001 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command 'virsh net-list | grep default' in directory '/root'
2018-09-29 14:50:16,019 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command 'virsh net-destroy default' in directory '/root'
2018-09-29 14:50:16,218 [salt.state       :290 ][INFO    ][17136] {'pid': 37613, 'retcode': 0, 'stderr': '', 'stdout': 'Network default destroyed'}
2018-09-29 14:50:16,219 [salt.state       :1941][INFO    ][17136] Completed state [virsh net-destroy default] at time 14:50:16.219012 duration_in_ms=218.207
2018-09-29 14:50:16,221 [salt.state       :1770][INFO    ][17136] Running state [libvirt-bin] at time 14:50:16.221070
2018-09-29 14:50:16,221 [salt.state       :1803][INFO    ][17136] Executing state service.running for [libvirt-bin]
2018-09-29 14:50:16,222 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemctl', 'status', 'libvirt-bin.service', '-n', '0'] in directory '/root'
2018-09-29 14:50:16,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemctl', 'is-active', 'libvirt-bin.service'] in directory '/root'
2018-09-29 14:50:16,237 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemctl', 'is-enabled', 'libvirt-bin.service'] in directory '/root'
2018-09-29 14:50:16,243 [salt.state       :290 ][INFO    ][17136] The service libvirt-bin is already running
2018-09-29 14:50:16,244 [salt.state       :1941][INFO    ][17136] Completed state [libvirt-bin] at time 14:50:16.244034 duration_in_ms=22.963
2018-09-29 14:50:16,244 [salt.state       :1770][INFO    ][17136] Running state [libvirt-bin] at time 14:50:16.244247
2018-09-29 14:50:16,244 [salt.state       :1803][INFO    ][17136] Executing state service.mod_watch for [libvirt-bin]
2018-09-29 14:50:16,245 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemctl', 'is-active', 'libvirt-bin.service'] in directory '/root'
2018-09-29 14:50:16,251 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17136] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'libvirt-bin.service'] in directory '/root'
2018-09-29 14:50:16,325 [salt.state       :290 ][INFO    ][17136] {'libvirt-bin': True}
2018-09-29 14:50:16,325 [salt.state       :1941][INFO    ][17136] Completed state [libvirt-bin] at time 14:50:16.325887 duration_in_ms=81.639
2018-09-29 14:50:16,328 [salt.minion      :1708][INFO    ][17136] Returning information for job: 20180929144919597117
2018-09-29 14:55:20,791 [salt.utils.schedule:1375][INFO    ][3775] Running scheduled job: __mine_interval
2018-09-29 14:57:12,201 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command state.sls with jid 20180929145712252433
2018-09-29 14:57:12,211 [salt.minion      :1431][INFO    ][38100] Starting a new job with PID 38100
2018-09-29 14:57:15,209 [salt.state       :905 ][INFO    ][38100] Loading fresh modules for state activity
2018-09-29 14:57:15,253 [salt.fileclient  :1215][INFO    ][38100] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-09-29 14:57:15,275 [salt.fileclient  :1215][INFO    ][38100] Fetching file from saltenv 'base', ** done ** 'ceilometer/agent.sls'
2018-09-29 14:57:16,647 [salt.state       :1770][INFO    ][38100] Running state [ceilometer-agent-compute] at time 14:57:16.647607
2018-09-29 14:57:16,647 [salt.state       :1803][INFO    ][38100] Executing state pkg.installed for [ceilometer-agent-compute]
2018-09-29 14:57:16,648 [salt.loaded.int.module.cmdmod:395 ][INFO    ][38100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:57:16,947 [salt.loaded.int.module.cmdmod:395 ][INFO    ][38100] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-compute'] in directory '/root'
2018-09-29 14:57:17,012 [salt.loaded.int.module.cmdmod:395 ][INFO    ][38100] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-09-29 14:57:18,454 [salt.loaded.int.module.cmdmod:395 ][INFO    ][38100] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-09-29 14:57:18,474 [salt.loaded.int.module.cmdmod:395 ][INFO    ][38100] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-compute'] in directory '/root'
2018-09-29 14:57:22,290 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command saltutil.find_job with jid 20180929145722335275
2018-09-29 14:57:22,299 [salt.minion      :1431][INFO    ][39191] Starting a new job with PID 39191
2018-09-29 14:57:22,312 [salt.minion      :1708][INFO    ][39191] Returning information for job: 20180929145722335275
2018-09-29 14:57:27,041 [salt.loaded.int.module.cmdmod:395 ][INFO    ][38100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-09-29 14:57:27,076 [salt.state       :290 ][INFO    ][38100] Made the following changes:
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'python-pysnmp2' changed from 'absent' to '1'
'python-kafka' changed from 'absent' to '1.3.2-1.1~u16.04+mcp2'
'python-pysnmp-common' changed from 'absent' to '1'
'ceilometer-agent-compute' changed from 'absent' to '1:9.0.6-2~u16.04+mcp15'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'ceilometer-common' changed from 'absent' to '1:9.0.6-2~u16.04+mcp15'
'python2.7-twisted-core' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'python-ceilometer' changed from 'absent' to '1:9.0.6-2~u16.04+mcp15'
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'python2.7-twisted' changed from 'absent' to '1'
'python-croniter' changed from 'absent' to '0.3.8-1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'python-attr' changed from 'absent' to '15.2.0-1'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'python-serial' changed from 'absent' to '3.0.1-1'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.2-0ubuntu0.17.10.1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'

2018-09-29 14:57:27,095 [salt.state       :905 ][INFO    ][38100] Loading fresh modules for state activity
2018-09-29 14:57:27,235 [salt.state       :1941][INFO    ][38100] Completed state [ceilometer-agent-compute] at time 14:57:27.235189 duration_in_ms=10587.583
2018-09-29 14:57:27,238 [salt.state       :1770][INFO    ][38100] Running state [/etc/ceilometer/ceilometer.conf] at time 14:57:27.238628
2018-09-29 14:57:27,238 [salt.state       :1803][INFO    ][38100] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-09-29 14:57:27,274 [salt.fileclient  :1215][INFO    ][38100] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/ceilometer-agent.conf.Debian'
2018-09-29 14:57:27,359 [salt.state       :290 ][INFO    ][38100] File changed:
--- 
+++ 
@@ -1,2173 +1,39 @@
 [DEFAULT]
-
-#
-# From ceilometer
-#
-
-# To reduce polling agent load, samples are sent to the notification agent in a
-# batch. To gain higher throughput at the cost of load set this to False.
-# (boolean value)
-#batch_polled_samples = true
-
-# To reduce large requests at same time to Nova or other components from
-# different compute agents, shuffle start time of polling task. (integer value)
-#shuffle_time_before_polling_task = 0
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
-# Inspector to use for inspecting the hypervisor layer. Known inspectors are
-# libvirt, hyperv, vsphere and xenapi. (string value)
-#hypervisor_inspector = libvirt
-
-# Libvirt domain type. (string value)
-# Allowed values: kvm, lxc, qemu, uml, xen
-#libvirt_type = kvm
-
-# Override the default libvirt URI (which is dependent on libvirt_type).
-# (string value)
-#libvirt_uri =
-
-# DEPRECATED: Dispatchers to process metering data. (multi valued)
-# Deprecated group/name - [DEFAULT]/dispatcher
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: This option only be used in collector service, the collector service
-# has been deprecated and will be removed in the future, this should also be
-# deprecated for removal with collector service.
-#meter_dispatchers =
-
-# DEPRECATED: Dispatchers to process event data. (multi valued)
-# Deprecated group/name - [DEFAULT]/dispatcher
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: This option only be used in collector service, the collector service
-# has been deprecated and will be removed in the future, this should also be
-# deprecated for removal with collector service.
-#event_dispatchers =
-
-# Exchange name for Ironic notifications. (string value)
-#ironic_exchange = ironic
-
-# DEPRECATED: Allow novaclient's debug log output. (Use default_log_levels
-# instead) (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#nova_http_log_debug = false
-
-# Swift reseller prefix. Must be on par with reseller_prefix in proxy-
-# server.conf. (string value)
-#reseller_prefix = AUTH_
-
-# Configuration file for pipeline definition. (string value)
-#pipeline_cfg_file = pipeline.yaml
-
-# Configuration file for event pipeline definition. (string value)
-#event_pipeline_cfg_file = event_pipeline.yaml
-
-# Source for samples emitted on this instance. (string value)
-#sample_source = openstack
-
-# List of metadata prefixes reserved for metering use. (list value)
-#reserved_metadata_namespace = metering.
-
-# Limit on length of reserved metadata values. (integer value)
-#reserved_metadata_length = 256
-
-# List of metadata keys reserved for metering use. And these keys are
-# additional to the ones included in the namespace. (list value)
-#reserved_metadata_keys =
-
-# Path to the rootwrap configuration file to use for running commands as root
-# (string value)
-#rootwrap_config = /etc/ceilometer/rootwrap.conf
-
-# DEPRECATED: Exchange name for Nova notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#nova_control_exchange = nova
-
-# DEPRECATED: Exchange name for Neutron notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#neutron_control_exchange = neutron
-
-# DEPRECATED: Exchange name for Heat notifications (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#heat_control_exchange = heat
-
-# DEPRECATED: Exchange name for Glance notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#glance_control_exchange = glance
-
-# DEPRECATED: Exchange name for Keystone notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#keystone_control_exchange = keystone
-
-# DEPRECATED: Exchange name for Cinder notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#cinder_control_exchange = cinder
-
-# DEPRECATED: Exchange name for Data Processing notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#sahara_control_exchange = sahara
-
-# DEPRECATED: Exchange name for Swift notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#swift_control_exchange = swift
-
-# DEPRECATED: Exchange name for Magnum notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#magnum_control_exchange = magnum
-
-# DEPRECATED: Exchange name for DBaaS notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#trove_control_exchange = trove
-
-# DEPRECATED: Exchange name for Messaging service notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#zaqar_control_exchange = zaqar
-
-# DEPRECATED: Exchange name for DNS service notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#dns_control_exchange = central
-
-# DEPRECATED: Exchange name for ceilometer notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#ceilometer_control_exchange = ceilometer
-
-# Name of this node, which must be valid in an AMQP key. Can be an opaque
-# identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
-#host = <your_hostname>
-
-# Timeout seconds for HTTP requests. Set it to None to disable timeout.
-# (integer value)
-#http_timeout = 600
-
-# Maximum number of parallel requests for services to handle at the same time.
-# (integer value)
-# Minimum value: 1
-#max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# A URL representing the messaging driver to use and its full configuration.
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[api]
-
-#
-# From ceilometer
-#
-
-# Default maximum number of items returned by API request. (integer value)
-# Minimum value: 1
-#default_api_return_limit = 100
-
-# Set True to disable resource/meter/sample URLs. Default autodetection by
-# querying keystone. (boolean value)
-#gnocchi_is_enabled = <None>
-
-# Set True to redirect alarms URLs to aodh. Default autodetection by querying
-# keystone. (boolean value)
-#aodh_is_enabled = <None>
-
-# The endpoint of Aodh to redirect alarms URLs to Aodh API. Default
-# autodetection by querying keystone. (string value)
-#aodh_url = <None>
-
-# Set True to redirect events URLs to Panko. Default autodetection by querying
-# keystone. (boolean value)
-#panko_is_enabled = <None>
-
-# The endpoint of Panko to redirect events URLs to Panko API. Default
-# autodetection by querying keystone. (string value)
-#panko_url = <None>
-
-
-[collector]
-
-#
-# From ceilometer
-#
-
-# Address to which the UDP socket is bound. Set to an empty string to disable.
-# (unknown value)
-#udp_address = 0.0.0.0
-
-# Port to which the UDP socket is bound. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#udp_port = 4952
-
-# Number of notification messages to wait before dispatching them (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely) (integer value)
-#batch_timeout = <None>
-
-# Number of workers for collector service. default value is 1. (integer value)
-# Minimum value: 1
-# Deprecated group/name - [DEFAULT]/collector_workers
-#workers = 1
-
+executor_thread_pool_size = 5
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
 
 [compute]
 
-#
-# From ceilometer
-#
-
-# DEPRECATED: Enable work-load partitioning, allowing multiple compute agents
-# to be run simultaneously. (replaced by instance_discovery_method) (boolean
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#workload_partitioning = false
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Allowed values: naive, workload_partitioning, libvirt_metadata
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline.  (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will works only
-# when 'instance_discovery_method' was set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
-
-
-[coordination]
-
-#
-# From ceilometer
-#
-
-# The backend URL to use for distributed coordination. If left empty, per-
-# deployment central agent and per-host compute agent won't do workload
-# partitioning and will only function correctly if a single instance of that
-# service is running. (string value)
-#backend_url = <None>
-
-# Number of seconds between checks to see if group membership has changed
-# (floating point value)
-#check_watchers = 10.0
-
-
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
-[database]
-
-#
-# From ceilometer
-#
-
-# Number of seconds that samples are kept in the database for (<= 0 means
-# forever). (integer value)
-# Deprecated group/name - [database]/time_to_live
-#metering_time_to_live = -1
-
-# The connection string used to connect to the metering database. (if unset,
-# connection is used) (string value)
-#metering_connection = <None>
-
-# Indicates if expirer expires only samples. If set true, expired samples will
-# be deleted, but residual resource and meter definition data will remain.
-# (boolean value)
-#sql_expire_samples_only = false
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Timeout before idle SQL connections are reaped. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#idle_timeout = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-
-[dispatcher_file]
-
-#
-# From ceilometer
-#
-
-# Name and the location of the file to record meters. (string value)
-#file_path = <None>
-
-# The max size of the file. (integer value)
-#max_bytes = 0
-
-# The max number of the files to keep. (integer value)
-#backup_count = 0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# Filter out samples generated by Gnocchi service activity (boolean value)
-#filter_service_activity = true
-
-# Gnocchi project used to filter out samples generated by Gnocchi service
-# activity (string value)
-#filter_project = gnocchi
-
-# The archive policy to use when the dispatcher create a new metric. (string
-# value)
-#archive_policy = <None>
-
-# The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-#resources_definition_file = gnocchi_resources.yaml
-
-# Number of seconds before request to gnocchi times out (floating point value)
-# Minimum value: 0
-#request_timeout = 6.05
-
-
-[dispatcher_http]
-
-#
-# From ceilometer
-#
-
-# The target where the http request will be sent. If this is not set, no data
-# will be posted. For example: target = http://hostname:1234/path (string
-# value)
-#target =
-
-# The target for event data where the http request will be sent to. If this is
-# not set, it will default to same as Sample target. (string value)
-#event_target = <None>
-
-# The max time in seconds to wait for a request to timeout. (integer value)
-#timeout = 5
-
-# The path to a server certificate or directory if the system CAs are not used
-# or if a self-signed certificate is used. Set to False to ignore SSL cert
-# verification. (string value)
-#verify_ssl = <None>
-
-# Indicates whether samples are published in a batch. (boolean value)
-#batch_mode = false
-
-
-[event]
-
-#
-# From ceilometer
-#
-
-# Configuration file for event definitions. (string value)
-#definitions_cfg_file = event_definitions.yaml
-
-# Drop notifications if no event definition matches. (Otherwise, we convert
-# them with just the default traits) (boolean value)
-#drop_unmatched_notifications = false
-
-# Store the raw notification for select priority levels (info and/or error). By
-# default, raw details are not captured. (multi valued)
-#store_raw =
-
-
-[hardware]
-
-#
-# From ceilometer
-#
-
-# URL scheme to use for hardware nodes. (string value)
-#url_scheme = snmp://
-
-# SNMPd user name of all nodes running in the cloud. (string value)
-#readonly_user_name = ro_snmp_user
-
-# SNMPd v3 authentication password of all the nodes running in the cloud.
-# (string value)
-#readonly_user_password = password
-
-# SNMPd v3 authentication algorithm of all the nodes running in the cloud
-# (string value)
-# Allowed values: md5, sha
-#readonly_user_auth_proto = <None>
-
-# SNMPd v3 encryption algorithm of all the nodes running in the cloud (string
-# value)
-# Allowed values: des, aes128, 3des, aes192, aes256
-#readonly_user_priv_proto = <None>
-
-# SNMPd v3 encryption password of all the nodes running in the cloud. (string
-# value)
-#readonly_user_priv_password = <None>
-
-# Name of the control plane Tripleo network (string value)
-#tripleo_network_name = ctlplane
-
-# Configuration file for defining hardware snmp meters. (string value)
-#meter_definitions_file = snmp.yaml
-
-
-[ipmi]
-
-#
-# From ceilometer
-#
-
-# Number of retries upon Intel Node Manager initialization failure (integer
-# value)
-#node_manager_init_retry = 3
-
-# Tolerance of IPMI/NM polling failures before disable this pollster. Negative
-# indicates retrying forever. (integer value)
-#polling_retry = 3
-
+instance_discovery_method = libvirt_metadata
 
 [keystone_authtoken]
 
-#
-# From keystonemiddleware.auth_token
-#
-
-# Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should ideally be unversioned, client support in the
-# wild varies. If you're using a versioned v2 endpoint here, then this should
-# *not* be the same endpoint the service user utilizes for validating tokens,
-# because normal end users may not be able to reach that endpoint. (string
-# value)
-#auth_uri = <None>
-
-# API version of the admin Identity API endpoint. (string value)
-#auth_version = <None>
-
-# Do not handle authorization requests within the middleware, but delegate the
-# authorization decision to downstream WSGI components. (boolean value)
-#delay_auth_decision = false
-
-# Request timeout value for communicating with Identity API server. (integer
-# value)
-#http_connect_timeout = <None>
-
-# How many times are we trying to reconnect when communicating with Identity
-# API Server. (integer value)
-#http_request_max_retries = 3
-
-# Request environment key where the Swift cache object is stored. When
-# auth_token middleware is deployed with a Swift cache, use this option to have
-# the middleware share a caching backend with swift. Otherwise, use the
-# ``memcached_servers`` option instead. (string value)
-#cache = <None>
-
-# Required if identity server requires client certificate (string value)
-#certfile = <None>
-
-# Required if identity server requires client certificate (string value)
-#keyfile = <None>
-
-# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# Defaults to system CAs. (string value)
-#cafile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# The region in which the identity server can be found. (string value)
-#region_name = <None>
-
-# DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P
-# release. (string value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#signing_dir = <None>
-
-# Optionally specify a list of memcached server(s) to use for caching. If left
-# undefined, tokens will instead be cached in-process. (list value)
-# Deprecated group/name - [keystone_authtoken]/memcache_servers
-#memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Allowed values: None, MAC, ENCRYPT
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead before it is
-# tried again. (integer value)
-#memcache_pool_dead_retry = 300
-
-# (Optional) Maximum total number of open connections to every memcached
-# server. (integer value)
-#memcache_pool_maxsize = 10
-
-# (Optional) Socket timeout in seconds for communicating with a memcached
-# server. (integer value)
-#memcache_pool_socket_timeout = 3
-
-# (Optional) Number of seconds a connection to memcached is held unused in the
-# pool before it is closed. (integer value)
-#memcache_pool_unused_timeout = 60
-
-# (Optional) Number of seconds that an operation will wait to get a memcached
-# client connection from the pool. (integer value)
-#memcache_pool_conn_get_timeout = 10
-
-# (Optional) Use the advanced (eventlet safe) memcached client pool. The
-# advanced pool will only work under python 2.x. (boolean value)
-#memcache_use_advanced_pool = false
-
-# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
-# middleware will not ask for service catalog on token validation and will not
-# set the X-Service-Catalog header. (boolean value)
-#include_service_catalog = true
-
-# Used to control the use and type of token binding. Can be set to: "disabled"
-# to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it
-# if not. "strict" like "permissive" but if the bind type is unknown the token
-# will be rejected. "required" any form of token binding is needed to be
-# allowed. Finally the name of a binding method that must be present in tokens.
-# (string value)
-#enforce_token_bind = permissive
-
-# DEPRECATED: If true, the revocation list will be checked for cached tokens.
-# This requires that PKI tokens are configured on the identity server. (boolean
-# value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#check_revocations_for_cached = false
-
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
-# single algorithm or multiple. The algorithms are those supported by Python
-# standard hashlib.new(). The hashes will be tried in the order given, so put
-# the preferred one first for performance. The result of the first hash will be
-# stored in the cache. This will typically be set to multiple values only while
-# migrating from a less secure algorithm to a more secure one. Once all the old
-# tokens are expired this option should be set to a single value for better
-# performance. (list value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#hash_algorithms = md5
-
-# A choice of roles that must be present in a service token. Service tokens are
-# allowed to request that an expired token can be used and so this check should
-# tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present.
-# For backwards compatibility reasons this currently only affects the
-# allow_expired check. (list value)
-#service_token_roles = service
-
-# For backwards compatibility reasons we must let valid service tokens pass
-# that don't pass the service_token_roles check as valid. Setting this true
-# will become the default in a future release and should be enabled if
-# possible. (boolean value)
-#service_token_roles_required = false
-
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Allowed values: http, https
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
-# Authentication type to load (string value)
-# Deprecated group/name - [keystone_authtoken]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[meter]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Configuration file for defining meter notifications. This option
-# is deprecated and use meter_definitions_dirs to configure meter notification
-# file. Meter definitions configuration file will be sought according to the
-# parameter. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#meter_definitions_cfg_file = <None>
-
-# List directory to find files of defining meter notifications. (multi valued)
-#meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-FJanTc/ceilometer-9.0.6/ceilometer/data/meters.d
-
-
-[notification]
-
-#
-# From ceilometer
-#
-
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
-# Minimum value: 1
-#pipeline_processing_queues = 10
-
-# Acknowledge message when event persistence fails. (boolean value)
-#ack_on_event_error = true
-
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
-#workload_partitioning = false
-
-# Messaging URLs to listen for notifications. Example:
-# rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
-# (DEFAULT/transport_url is used if empty). This is useful when you have
-# dedicate messaging nodes for each service, for example, all nova
-# notifications go to rabbit-nova:5672, while all cinder notifications go to
-# rabbit-cinder:5672. (multi valued)
-#messaging_urls =
-
-# Number of notification messages to wait before publishing them. Batching is
-# advised when transformations are applied in pipeline. (integer value)
-# Minimum value: 1
-#batch_size = 100
-
-# Number of seconds to wait before publishing samples when batch_size is not
-# reached (None means indefinitely) (integer value)
-#batch_timeout = 5
-
-# Number of workers for notification service, default value is 1. (integer
-# value)
-# Minimum value: 1
-# Deprecated group/name - [DEFAULT]/notification_workers
-#workers = 1
-
-# Exchanges name to listen for notifications. (multi valued)
-# Deprecated group/name - [DEFAULT]/http_control_exchanges
-#notification_control_exchanges = nova
-#notification_control_exchanges = glance
-#notification_control_exchanges = neutron
-#notification_control_exchanges = cinder
-#notification_control_exchanges = heat
-#notification_control_exchanges = keystone
-#notification_control_exchanges = sahara
-#notification_control_exchanges = trove
-#notification_control_exchanges = zaqar
-#notification_control_exchanges = swift
-#notification_control_exchanges = ceilometer
-#notification_control_exchanges = magnum
-#notification_control_exchanges = dns
-
-
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# Pool Size for Kafka Consumers (integer value)
-#pool_size = 10
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = ceilometer
+password = opnfv_secret
+auth_uri = http://192.168.10.35:5000
+auth_url = http://192.168.10.35:35357
+interface = internal
+token_cache_time = -1
 
 [oslo_messaging_notifications]
 
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
+topics = notifications
 
 [oslo_messaging_rabbit]
 
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Allowed values: round-robin, shuffle
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Allowed values: new, single, read_write
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-
-[polling]
-
-#
-# From ceilometer
-#
-
-# Configuration file for pipeline definition. (string value)
-#cfg_file = polling.yaml
-
-# Work-load partitioning group prefix. Use only if you want to run multiple
-# polling agents with different config files. For each sub-group of the agent
-# pool with the same partitioning_group_prefix a disjoint subset of pollsters
-# should be loaded. (string value)
-#partitioning_group_prefix = <None>
-
-
-[publisher]
-
-#
-# From ceilometer
-#
-
-# Secret value for signing messages. Set value empty if signing is not required
-# to avoid computational overhead. (string value)
-# Deprecated group/name - [DEFAULT]/metering_secret
-# Deprecated group/name - [publisher_rpc]/metering_secret
-# Deprecated group/name - [publisher]/metering_secret
-#telemetry_secret = change this for valid signing
-
-
-[publisher_notifier]
-
-#
-# From ceilometer
-#
-
-# The topic that ceilometer uses for metering notifications. (string value)
-#metering_topic = metering
-
-# The topic that ceilometer uses for event notifications. (string value)
-#event_topic = event
-
-# The driver that ceilometer uses for metering notifications. (string value)
-# Deprecated group/name - [publisher_notifier]/metering_driver
-#telemetry_driver = messagingv2
-
-
-[rgw_admin_credentials]
-
-#
-# From ceilometer
-#
-
-# Access key for Radosgw Admin. (string value)
-#access_key = <None>
-
-# Secret key for Radosgw Admin. (string value)
-#secret_key = <None>
-
-
 [service_credentials]
 
-#
-# From ceilometer-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-# Authentication URL (string value)
-#auth_url = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
-
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
-# Allowed values: public, internal, admin, auth, publicURL, internalURL, adminURL
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-
-[service_types]
-
-#
-# From ceilometer
-#
-
-# Glance service type. (string value)
-#glance = image
-
-# Neutron service type. (string value)
-#neutron = network
-
-# Neutron load balancer version. (string value)
-# Allowed values: v1, v2
-#neutron_lbaas_version = v2
-
-# Nova service type. (string value)
-#nova = compute
-
-# Radosgw service type. (string value)
-#radosgw = <None>
-
-# Swift service type. (string value)
-#swift = object-store
-
-# Cinder service type. (string value)
-# Deprecated group/name - [service_types]/cinderv2
-#cinder = volumev3
-
-
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = ceilometer
+password = opnfv_secret
+auth_url = http://192.168.10.35:5000
+token_cache_time = -1
+interface = internal
+region_name = RegionOne

2018-09-29 14:57:27,360 [salt.state       :1941][INFO    ][38100] Completed state [/etc/ceilometer/ceilometer.conf] at time 14:57:27.360887 duration_in_ms=122.249
2018-09-29 14:57:27,361 [salt.state       :1770][INFO    ][38100] Running state [/etc/default/ceilometer-agent-compute] at time 14:57:27.361262
2018-09-29 14:57:27,361 [salt.state       :1803][INFO    ][38100] Executing state file.managed for [/etc/default/ceilometer-agent-compute]
2018-09-29 14:57:27,387 [salt.fileclient  :1215][INFO    ][38100] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-09-29 14:57:27,397 [salt.state       :290 ][INFO    ][38100] File changed:
New file
2018-09-29 14:57:27,397 [salt.state       :1941][INFO    ][38100] Completed state [/etc/default/ceilometer-agent-compute] at time 14:57:27.397705 duration_in_ms=36.442
2018-09-29 14:57:27,398 [salt.state       :1770][INFO    ][38100] Running state [/etc/ceilometer/pipeline.yaml] at time 14:57:27.397979
2018-09-29 14:57:27,398 [salt.state       :1803][INFO    ][38100] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-09-29 14:57:27,421 [salt.fileclient  :1215][INFO    ][38100] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/pipeline.yaml'
2018-09-29 14:57:27,480 [salt.state       :290 ][INFO    ][38100] File changed:
New file
2018-09-29 14:57:27,480 [salt.state       :1941][INFO    ][38100] Completed state [/etc/ceilometer/pipeline.yaml] at time 14:57:27.480226 duration_in_ms=82.247
2018-09-29 14:57:27,480 [salt.state       :1770][INFO    ][38100] Running state [/etc/ceilometer/event_pipeline.yaml] at time 14:57:27.480480
2018-09-29 14:57:27,480 [salt.state       :1803][INFO    ][38100] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-09-29 14:57:27,507 [salt.fileclient  :1215][INFO    ][38100] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/event_pipeline.yaml'
2018-09-29 14:57:27,558 [salt.state       :290 ][INFO    ][38100] File changed:
New file
2018-09-29 14:57:27,558 [salt.state       :1941][INFO    ][38100] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 14:57:27.558868 duration_in_ms=78.387
2018-09-29 14:57:27,944 [salt.state       :1770][INFO    ][38100] Running state [ceilometer-agent-compute] at time 14:57:27.944604
2018-09-29 14:57:27,944 [salt.state       :1803][INFO    ][38100] Executing state service.running for [ceilometer-agent-compute]
2018-09-29 14:57:27,945 [salt.loaded.int.module.cmdmod:395 ][INFO    ][38100] Executing command ['systemctl', 'status', 'ceilometer-agent-compute.service', '-n', '0'] in directory '/root'
2018-09-29 14:57:27,954 [salt.loaded.int.module.cmdmod:395 ][INFO    ][38100] Executing command ['systemctl', 'is-active', 'ceilometer-agent-compute.service'] in directory '/root'
2018-09-29 14:57:27,961 [salt.loaded.int.module.cmdmod:395 ][INFO    ][38100] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-compute.service'] in directory '/root'
2018-09-29 14:57:27,967 [salt.state       :290 ][INFO    ][38100] The service ceilometer-agent-compute is already running
2018-09-29 14:57:27,967 [salt.state       :1941][INFO    ][38100] Completed state [ceilometer-agent-compute] at time 14:57:27.967633 duration_in_ms=23.029
2018-09-29 14:57:27,967 [salt.state       :1770][INFO    ][38100] Running state [ceilometer-agent-compute] at time 14:57:27.967821
2018-09-29 14:57:27,968 [salt.state       :1803][INFO    ][38100] Executing state service.mod_watch for [ceilometer-agent-compute]
2018-09-29 14:57:27,968 [salt.loaded.int.module.cmdmod:395 ][INFO    ][38100] Executing command ['systemctl', 'is-active', 'ceilometer-agent-compute.service'] in directory '/root'
2018-09-29 14:57:27,974 [salt.loaded.int.module.cmdmod:395 ][INFO    ][38100] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-compute.service'] in directory '/root'
2018-09-29 14:57:28,113 [salt.state       :290 ][INFO    ][38100] {'ceilometer-agent-compute': True}
2018-09-29 14:57:28,113 [salt.state       :1941][INFO    ][38100] Completed state [ceilometer-agent-compute] at time 14:57:28.113239 duration_in_ms=145.419
2018-09-29 14:57:28,114 [salt.minion      :1708][INFO    ][38100] Returning information for job: 20180929145712252433
2018-09-29 15:02:01,065 [salt.minion      :1307][INFO    ][3775] User sudo_ubuntu Executing command cp.push_dir with jid 20180929150201120453
2018-09-29 15:02:01,074 [salt.minion      :1431][INFO    ][39691] Starting a new job with PID 39691
