2018-05-09 23:09:46,878 [salt.utils       ][ERROR   ][1594] DNS lookup or connection check of 'salt' failed.
2018-05-09 23:09:46,879 [salt.minion      ][ERROR   ][1594] Master hostname: 'salt' not found or not responsive. Retrying in 30 seconds
2018-05-09 23:09:47,234 [salt.utils.parsers][WARNING ][1594] Minion received a SIGTERM. Exiting.
2018-05-09 23:10:30,361 [salt.minion      ][ERROR   ][1733] Error while bringing up minion for multi-master. Is master at 192.168.11.2 responding?
2018-05-09 23:11:20,417 [salt.minion      ][ERROR   ][1733] Error while bringing up minion for multi-master. Is master at 192.168.11.2 responding?
2018-05-09 23:12:10,469 [salt.minion      ][ERROR   ][1733] Error while bringing up minion for multi-master. Is master at 192.168.11.2 responding?
2018-05-09 23:13:00,524 [salt.minion      ][ERROR   ][1733] Error while bringing up minion for multi-master. Is master at 192.168.11.2 responding?
2018-05-09 23:13:50,576 [salt.minion      ][ERROR   ][1733] Error while bringing up minion for multi-master. Is master at 192.168.11.2 responding?
2018-05-09 23:14:32,715 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:32,816 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:33,055 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:33,061 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:33,067 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:33,071 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:33,275 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:33,278 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:33,282 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:33,532 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:33,537 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:33,540 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:14:33,543 [salt.utils.decorators][ERROR   ][1909] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-05-09 23:15:19,090 [salt.loaded.int.module.cmdmod][ERROR   ][1909] Command 'while true; do salt-call saltutil.running|grep fun: && continue; salt-call --local service.restart salt-minion; break; done' failed with return code: None
2018-05-09 23:15:57,313 [salt.loaded.int.module.cmdmod][INFO    ][8821] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-05-09 23:15:57,327 [salt.loaded.int.module.cmdmod][INFO    ][8821] Executing command ['systemctl', 'is-enabled', 'salt-minion.service'] in directory '/root'
2018-05-09 23:15:57,356 [salt.loaded.int.module.cmdmod][INFO    ][8821] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-05-09 23:15:57,406 [salt.utils.parsers][WARNING ][1733] Minion received a SIGTERM. Exiting.
2018-05-09 23:15:58,093 [salt.cli.daemons ][INFO    ][8903] Setting up the Salt Minion "ctl01.mcp-pike-ovn-noha.local"
2018-05-09 23:15:58,223 [salt.cli.daemons ][INFO    ][8903] Starting up the Salt Minion
2018-05-09 23:15:58,225 [salt.utils.event ][INFO    ][8903] Starting pull socket on /var/run/salt/minion/minion_event_ec9259c21c_pull.ipc
2018-05-09 23:15:58,997 [salt.minion      ][INFO    ][8903] Creating minion process manager
2018-05-09 23:16:00,411 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][8903] Executing command ['date', '+%z'] in directory '/root'
2018-05-09 23:16:00,434 [salt.utils.schedule][INFO    ][8903] Updating job settings for scheduled job: __mine_interval
2018-05-09 23:16:00,438 [salt.minion      ][INFO    ][8903] Added mine.update to scheduler
2018-05-09 23:16:00,443 [salt.minion      ][INFO    ][8903] Minion is starting as user 'root'
2018-05-09 23:16:00,456 [salt.minion      ][INFO    ][8903] Minion is ready to receive requests!
2018-05-09 23:16:00,459 [salt.minion      ][INFO    ][8903] User sudo_ubuntu Executing command state.sls with jid 20180509231600061479
2018-05-09 23:16:00,474 [salt.minion      ][INFO    ][8987] Starting a new job with PID 8987
2018-05-09 23:16:01,459 [salt.utils.schedule][INFO    ][8903] Running scheduled job: __mine_interval
2018-05-09 23:16:03,247 [salt.state       ][INFO    ][8987] Loading fresh modules for state activity
2018-05-09 23:16:03,295 [salt.fileclient  ][INFO    ][8987] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-05-09 23:16:03,416 [salt.fileclient  ][INFO    ][8987] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-05-09 23:16:03,525 [salt.fileclient  ][INFO    ][8987] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-05-09 23:16:03,668 [salt.fileclient  ][INFO    ][8987] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-05-09 23:16:03,919 [salt.fileclient  ][INFO    ][8987] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-05-09 23:16:04,022 [salt.state       ][INFO    ][8987] Running state [/etc/hostname] at time 23:16:04.022798
2018-05-09 23:16:04,023 [salt.state       ][INFO    ][8987] Executing state file.managed for /etc/hostname
2018-05-09 23:16:04,049 [salt.fileclient  ][INFO    ][8987] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-05-09 23:16:04,053 [salt.state       ][INFO    ][8987] File /etc/hostname is in the correct state
2018-05-09 23:16:04,053 [salt.state       ][INFO    ][8987] Completed state [/etc/hostname] at time 23:16:04.053801 duration_in_ms=31.004
2018-05-09 23:16:04,054 [salt.state       ][INFO    ][8987] Running state [hostname ctl01] at time 23:16:04.054834
2018-05-09 23:16:04,055 [salt.state       ][INFO    ][8987] Executing state cmd.wait for hostname ctl01
2018-05-09 23:16:04,055 [salt.state       ][INFO    ][8987] No changes made for hostname ctl01
2018-05-09 23:16:04,055 [salt.state       ][INFO    ][8987] Completed state [hostname ctl01] at time 23:16:04.055825 duration_in_ms=0.992
2018-05-09 23:16:04,057 [salt.state       ][INFO    ][8987] Running state [cfg] at time 23:16:04.057556
2018-05-09 23:16:04,057 [salt.state       ][INFO    ][8987] Executing state host.present for cfg
2018-05-09 23:16:04,059 [salt.state       ][INFO    ][8987] {'host': 'cfg'}
2018-05-09 23:16:04,059 [salt.state       ][INFO    ][8987] Completed state [cfg] at time 23:16:04.059185 duration_in_ms=1.629
2018-05-09 23:16:04,059 [salt.state       ][INFO    ][8987] Running state [cfg.mcp-pike-ovn-noha.local] at time 23:16:04.059425
2018-05-09 23:16:04,059 [salt.state       ][INFO    ][8987] Executing state host.present for cfg.mcp-pike-ovn-noha.local
2018-05-09 23:16:04,061 [salt.state       ][INFO    ][8987] {'host': 'cfg.mcp-pike-ovn-noha.local'}
2018-05-09 23:16:04,061 [salt.state       ][INFO    ][8987] Completed state [cfg.mcp-pike-ovn-noha.local] at time 23:16:04.061184 duration_in_ms=1.76
2018-05-09 23:16:04,061 [salt.state       ][INFO    ][8987] Running state [gtw01] at time 23:16:04.061410
2018-05-09 23:16:04,061 [salt.state       ][INFO    ][8987] Executing state host.present for gtw01
2018-05-09 23:16:04,062 [salt.state       ][INFO    ][8987] {'host': 'gtw01'}
2018-05-09 23:16:04,062 [salt.state       ][INFO    ][8987] Completed state [gtw01] at time 23:16:04.062588 duration_in_ms=1.179
2018-05-09 23:16:04,062 [salt.state       ][INFO    ][8987] Running state [gtw01.mcp-pike-ovn-noha.local] at time 23:16:04.062809
2018-05-09 23:16:04,063 [salt.state       ][INFO    ][8987] Executing state host.present for gtw01.mcp-pike-ovn-noha.local
2018-05-09 23:16:04,063 [salt.state       ][INFO    ][8987] {'host': 'gtw01.mcp-pike-ovn-noha.local'}
2018-05-09 23:16:04,064 [salt.state       ][INFO    ][8987] Completed state [gtw01.mcp-pike-ovn-noha.local] at time 23:16:04.063957 duration_in_ms=1.147
2018-05-09 23:16:04,064 [salt.state       ][INFO    ][8987] Running state [cmp01] at time 23:16:04.064178
2018-05-09 23:16:04,064 [salt.state       ][INFO    ][8987] Executing state host.present for cmp01
2018-05-09 23:16:04,065 [salt.state       ][INFO    ][8987] {'host': 'cmp01'}
2018-05-09 23:16:04,065 [salt.state       ][INFO    ][8987] Completed state [cmp01] at time 23:16:04.065325 duration_in_ms=1.146
2018-05-09 23:16:04,065 [salt.state       ][INFO    ][8987] Running state [cmp01.mcp-pike-ovn-noha.local] at time 23:16:04.065547
2018-05-09 23:16:04,065 [salt.state       ][INFO    ][8987] Executing state host.present for cmp01.mcp-pike-ovn-noha.local
2018-05-09 23:16:04,067 [salt.state       ][INFO    ][8987] {'host': 'cmp01.mcp-pike-ovn-noha.local'}
2018-05-09 23:16:04,067 [salt.state       ][INFO    ][8987] Completed state [cmp01.mcp-pike-ovn-noha.local] at time 23:16:04.067299 duration_in_ms=1.752
2018-05-09 23:16:04,067 [salt.state       ][INFO    ][8987] Running state [ctl01] at time 23:16:04.067522
2018-05-09 23:16:04,067 [salt.state       ][INFO    ][8987] Executing state host.present for ctl01
2018-05-09 23:16:04,068 [salt.state       ][INFO    ][8987] {'host': 'ctl01'}
2018-05-09 23:16:04,068 [salt.state       ][INFO    ][8987] Completed state [ctl01] at time 23:16:04.068678 duration_in_ms=1.156
2018-05-09 23:16:04,068 [salt.state       ][INFO    ][8987] Running state [ctl01.mcp-pike-ovn-noha.local] at time 23:16:04.068901
2018-05-09 23:16:04,069 [salt.state       ][INFO    ][8987] Executing state host.present for ctl01.mcp-pike-ovn-noha.local
2018-05-09 23:16:04,069 [salt.state       ][INFO    ][8987] {'host': 'ctl01.mcp-pike-ovn-noha.local'}
2018-05-09 23:16:04,070 [salt.state       ][INFO    ][8987] Completed state [ctl01.mcp-pike-ovn-noha.local] at time 23:16:04.070059 duration_in_ms=1.159
2018-05-09 23:16:04,070 [salt.state       ][INFO    ][8987] Running state [ctl] at time 23:16:04.070283
2018-05-09 23:16:04,070 [salt.state       ][INFO    ][8987] Executing state host.present for ctl
2018-05-09 23:16:04,071 [salt.state       ][INFO    ][8987] {'host': 'ctl'}
2018-05-09 23:16:04,071 [salt.state       ][INFO    ][8987] Completed state [ctl] at time 23:16:04.071773 duration_in_ms=1.491
2018-05-09 23:16:04,072 [salt.state       ][INFO    ][8987] Running state [ctl.mcp-pike-ovn-noha.local] at time 23:16:04.071989
2018-05-09 23:16:04,072 [salt.state       ][INFO    ][8987] Executing state host.present for ctl.mcp-pike-ovn-noha.local
2018-05-09 23:16:04,073 [salt.state       ][INFO    ][8987] {'host': 'ctl.mcp-pike-ovn-noha.local'}
2018-05-09 23:16:04,073 [salt.state       ][INFO    ][8987] Completed state [ctl.mcp-pike-ovn-noha.local] at time 23:16:04.073165 duration_in_ms=1.176
2018-05-09 23:16:04,073 [salt.state       ][INFO    ][8987] Running state [cmp02] at time 23:16:04.073389
2018-05-09 23:16:04,073 [salt.state       ][INFO    ][8987] Executing state host.present for cmp02
2018-05-09 23:16:04,074 [salt.state       ][INFO    ][8987] {'host': 'cmp02'}
2018-05-09 23:16:04,074 [salt.state       ][INFO    ][8987] Completed state [cmp02] at time 23:16:04.074565 duration_in_ms=1.176
2018-05-09 23:16:04,074 [salt.state       ][INFO    ][8987] Running state [cmp02.mcp-pike-ovn-noha.local] at time 23:16:04.074789
2018-05-09 23:16:04,075 [salt.state       ][INFO    ][8987] Executing state host.present for cmp02.mcp-pike-ovn-noha.local
2018-05-09 23:16:04,076 [salt.state       ][INFO    ][8987] {'host': 'cmp02.mcp-pike-ovn-noha.local'}
2018-05-09 23:16:04,076 [salt.state       ][INFO    ][8987] Completed state [cmp02.mcp-pike-ovn-noha.local] at time 23:16:04.076271 duration_in_ms=1.482
2018-05-09 23:16:04,076 [salt.state       ][INFO    ][8987] Running state [cfg01] at time 23:16:04.076495
2018-05-09 23:16:04,076 [salt.state       ][INFO    ][8987] Executing state host.present for cfg01
2018-05-09 23:16:04,077 [salt.state       ][INFO    ][8987] {'host': 'cfg01'}
2018-05-09 23:16:04,077 [salt.state       ][INFO    ][8987] Completed state [cfg01] at time 23:16:04.077684 duration_in_ms=1.188
2018-05-09 23:16:04,077 [salt.state       ][INFO    ][8987] Running state [cfg01.mcp-pike-ovn-noha.local] at time 23:16:04.077907
2018-05-09 23:16:04,078 [salt.state       ][INFO    ][8987] Executing state host.present for cfg01.mcp-pike-ovn-noha.local
2018-05-09 23:16:04,079 [salt.state       ][INFO    ][8987] {'host': 'cfg01.mcp-pike-ovn-noha.local'}
2018-05-09 23:16:04,080 [salt.state       ][INFO    ][8987] Completed state [cfg01.mcp-pike-ovn-noha.local] at time 23:16:04.079977 duration_in_ms=2.07
2018-05-09 23:16:04,080 [salt.state       ][INFO    ][8987] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 23:16:04.080184
2018-05-09 23:16:04,080 [salt.state       ][INFO    ][8987] Executing state file.absent for /etc/network/interfaces.d/50-cloud-init.cfg
2018-05-09 23:16:04,080 [salt.state       ][INFO    ][8987] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-05-09 23:16:04,080 [salt.state       ][INFO    ][8987] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 23:16:04.080891 duration_in_ms=0.707
2018-05-09 23:16:04,089 [salt.state       ][INFO    ][8987] Running state [ens3] at time 23:16:04.088509
2018-05-09 23:16:04,089 [salt.state       ][INFO    ][8987] Executing state network.managed for ens3
2018-05-09 23:16:04,293 [salt.loaded.int.module.cmdmod][INFO    ][8987] Executing command ['ifdown', 'ens3'] in directory '/root'
2018-05-09 23:16:05,451 [salt.loaded.int.module.cmdmod][INFO    ][8987] Executing command ['ifup', 'ens3'] in directory '/root'
2018-05-09 23:16:05,610 [salt.state       ][INFO    ][8987] {'interface': 'Added network interface.', 'status': 'Interface ens3 restart to validate'}
2018-05-09 23:16:05,610 [salt.state       ][INFO    ][8987] Completed state [ens3] at time 23:16:05.610507 duration_in_ms=1521.997
2018-05-09 23:16:05,610 [salt.state       ][INFO    ][8987] Running state [ens4] at time 23:16:05.610899
2018-05-09 23:16:05,611 [salt.state       ][INFO    ][8987] Executing state network.managed for ens4
2018-05-09 23:16:05,644 [salt.loaded.int.module.cmdmod][INFO    ][8987] Executing command ['ifup', 'ens4'] in directory '/root'
2018-05-09 23:16:06,334 [salt.state       ][INFO    ][8987] {'interface': 'Added network interface.', 'status': 'Interface ens4 is up'}
2018-05-09 23:16:06,335 [salt.state       ][INFO    ][8987] Completed state [ens4] at time 23:16:06.335263 duration_in_ms=724.363
2018-05-09 23:16:06,335 [salt.state       ][INFO    ][8987] Running state [ens6] at time 23:16:06.335538
2018-05-09 23:16:06,335 [salt.state       ][INFO    ][8987] Executing state network.managed for ens6
2018-05-09 23:16:06,358 [salt.loaded.int.module.cmdmod][INFO    ][8987] Executing command ['ifup', 'ens6'] in directory '/root'
2018-05-09 23:16:07,047 [salt.state       ][INFO    ][8987] {'interface': 'Added network interface.', 'status': 'Interface ens6 is up'}
2018-05-09 23:16:07,047 [salt.state       ][INFO    ][8987] Completed state [ens6] at time 23:16:07.047298 duration_in_ms=711.759
2018-05-09 23:16:07,047 [salt.state       ][INFO    ][8987] Running state [/etc/profile.d/proxy.sh] at time 23:16:07.047584
2018-05-09 23:16:07,047 [salt.state       ][INFO    ][8987] Executing state file.absent for /etc/profile.d/proxy.sh
2018-05-09 23:16:07,048 [salt.state       ][INFO    ][8987] File /etc/profile.d/proxy.sh is not present
2018-05-09 23:16:07,048 [salt.state       ][INFO    ][8987] Completed state [/etc/profile.d/proxy.sh] at time 23:16:07.048458 duration_in_ms=0.874
2018-05-09 23:16:07,048 [salt.state       ][INFO    ][8987] Running state [/etc/apt/apt.conf.d/95proxies] at time 23:16:07.048704
2018-05-09 23:16:07,048 [salt.state       ][INFO    ][8987] Executing state file.absent for /etc/apt/apt.conf.d/95proxies
2018-05-09 23:16:07,049 [salt.state       ][INFO    ][8987] File /etc/apt/apt.conf.d/95proxies is not present
2018-05-09 23:16:07,049 [salt.state       ][INFO    ][8987] Completed state [/etc/apt/apt.conf.d/95proxies] at time 23:16:07.049389 duration_in_ms=0.686
2018-05-09 23:16:07,051 [salt.minion      ][INFO    ][8987] Returning information for job: 20180509231600061479
2018-05-09 23:16:24,628 [salt.minion      ][INFO    ][8903] User sudo_ubuntu Executing command state.sls with jid 20180509231624627153
2018-05-09 23:16:24,645 [salt.minion      ][INFO    ][9386] Starting a new job with PID 9386
2018-05-09 23:16:27,230 [salt.state       ][INFO    ][9386] Loading fresh modules for state activity
2018-05-09 23:16:27,273 [salt.fileclient  ][INFO    ][9386] Fetching file from saltenv 'base', ** done ** 'opnfv/route_wrapper.sls'
2018-05-09 23:16:27,290 [salt.state       ][INFO    ][9386] Running state [/usr/local/sbin/route] at time 23:16:27.290546
2018-05-09 23:16:27,291 [salt.state       ][INFO    ][9386] Executing state file.managed for /usr/local/sbin/route
2018-05-09 23:16:27,304 [salt.state       ][INFO    ][9386] File changed:
New file
2018-05-09 23:16:27,304 [salt.state       ][INFO    ][9386] Completed state [/usr/local/sbin/route] at time 23:16:27.304546 duration_in_ms=14.0
2018-05-09 23:16:27,306 [salt.minion      ][INFO    ][9386] Returning information for job: 20180509231624627153
2018-05-09 23:16:28,029 [salt.minion      ][INFO    ][8903] User sudo_ubuntu Executing command system.reboot with jid 20180509231628032781
2018-05-09 23:16:28,051 [salt.minion      ][INFO    ][9395] Starting a new job with PID 9395
2018-05-09 23:16:28,063 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][9395] Executing command ['shutdown', '-r', 'now'] in directory '/root'
2018-05-09 23:16:28,141 [salt.utils.parsers][WARNING ][8903] Minion received a SIGTERM. Exiting.
2018-05-09 23:16:28,144 [salt.cli.daemons ][INFO    ][8903] Shutting down the Salt Minion
2018-05-09 23:16:39,709 [salt.cli.daemons ][INFO    ][1716] Setting up the Salt Minion "ctl01.mcp-pike-ovn-noha.local"
2018-05-09 23:16:40,234 [salt.cli.daemons ][INFO    ][1716] Starting up the Salt Minion
2018-05-09 23:16:40,236 [salt.utils.event ][INFO    ][1716] Starting pull socket on /var/run/salt/minion/minion_event_ec9259c21c_pull.ipc
2018-05-09 23:16:41,123 [salt.minion      ][INFO    ][1716] Creating minion process manager
2018-05-09 23:16:42,697 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][1716] Executing command ['date', '+%z'] in directory '/root'
2018-05-09 23:16:42,737 [salt.utils.schedule][INFO    ][1716] Updating job settings for scheduled job: __mine_interval
2018-05-09 23:16:42,741 [salt.minion      ][INFO    ][1716] Added mine.update to scheduler
2018-05-09 23:16:42,752 [salt.minion      ][INFO    ][1716] Minion is starting as user 'root'
2018-05-09 23:16:42,767 [salt.minion      ][INFO    ][1716] Minion is ready to receive requests!
2018-05-09 23:16:43,769 [salt.utils.schedule][INFO    ][1716] Running scheduled job: __mine_interval
2018-05-09 23:16:48,006 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command test.ping with jid 20180509231648704984
2018-05-09 23:16:48,025 [salt.minion      ][INFO    ][1850] Starting a new job with PID 1850
2018-05-09 23:16:48,118 [salt.minion      ][INFO    ][1850] Returning information for job: 20180509231648704984
2018-05-09 23:16:48,817 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command pkg.upgrade with jid 20180509231649521010
2018-05-09 23:16:48,830 [salt.minion      ][INFO    ][1855] Starting a new job with PID 1855
2018-05-09 23:16:48,997 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][1855] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:16:49,750 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][1855] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-05-09 23:16:58,845 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231659540238
2018-05-09 23:16:58,862 [salt.minion      ][INFO    ][1888] Starting a new job with PID 1888
2018-05-09 23:16:58,913 [salt.minion      ][INFO    ][1888] Returning information for job: 20180509231659540238
2018-05-09 23:17:09,705 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231709709607
2018-05-09 23:17:09,719 [salt.minion      ][INFO    ][2019] Starting a new job with PID 2019
2018-05-09 23:17:09,744 [salt.minion      ][INFO    ][2019] Returning information for job: 20180509231709709607
2018-05-09 23:17:19,790 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231719797520
2018-05-09 23:17:19,805 [salt.minion      ][INFO    ][3213] Starting a new job with PID 3213
2018-05-09 23:17:19,827 [salt.minion      ][INFO    ][3213] Returning information for job: 20180509231719797520
2018-05-09 23:17:28,951 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][1855] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:17:28,998 [salt.minion      ][INFO    ][1855] Returning information for job: 20180509231649521010
2018-05-09 23:17:29,696 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509231729702807
2018-05-09 23:17:29,716 [salt.minion      ][INFO    ][3581] Starting a new job with PID 3581
2018-05-09 23:17:32,600 [salt.state       ][INFO    ][3581] Loading fresh modules for state activity
2018-05-09 23:17:32,660 [salt.fileclient  ][INFO    ][3581] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-05-09 23:17:32,690 [salt.fileclient  ][INFO    ][3581] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-05-09 23:17:32,746 [salt.fileclient  ][INFO    ][3581] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-05-09 23:17:34,366 [salt.state       ][INFO    ][3581] Running state [ntp] at time 23:17:34.366435
2018-05-09 23:17:34,367 [salt.state       ][INFO    ][3581] Executing state pkg.installed for ntp
2018-05-09 23:17:34,368 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:17:34,909 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['apt-cache', '-q', 'policy', 'ntp'] in directory '/root'
2018-05-09 23:17:35,016 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:17:37,627 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:17:37,656 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-05-09 23:17:39,820 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231739814313
2018-05-09 23:17:39,838 [salt.minion      ][INFO    ][4530] Starting a new job with PID 4530
2018-05-09 23:17:39,862 [salt.minion      ][INFO    ][4530] Returning information for job: 20180509231739814313
2018-05-09 23:17:42,046 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:17:42,096 [salt.state       ][INFO    ][3581] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.8'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-05-09 23:17:42,125 [salt.state       ][INFO    ][3581] Loading fresh modules for state activity
2018-05-09 23:17:42,168 [salt.state       ][INFO    ][3581] Completed state [ntp] at time 23:17:42.168255 duration_in_ms=7801.82
2018-05-09 23:17:42,175 [salt.state       ][INFO    ][3581] Running state [/etc/ntp.conf] at time 23:17:42.175559
2018-05-09 23:17:42,175 [salt.state       ][INFO    ][3581] Executing state file.managed for /etc/ntp.conf
2018-05-09 23:17:42,209 [salt.fileclient  ][INFO    ][3581] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-05-09 23:17:42,295 [salt.state       ][INFO    ][3581] File changed:
--- 
+++ 
@@ -1,66 +1,26 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod notrap nomodify nopeer noquery
+restrict -6 default kod notrap nomodify nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift
+logfile /var/log/ntp.log

2018-05-09 23:17:42,296 [salt.state       ][INFO    ][3581] Completed state [/etc/ntp.conf] at time 23:17:42.295978 duration_in_ms=120.419
2018-05-09 23:17:42,685 [salt.state       ][INFO    ][3581] Running state [ntp] at time 23:17:42.685355
2018-05-09 23:17:42,686 [salt.state       ][INFO    ][3581] Executing state service.running for ntp
2018-05-09 23:17:42,688 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-05-09 23:17:42,703 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-05-09 23:17:42,717 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-05-09 23:17:42,731 [salt.state       ][INFO    ][3581] The service ntp is already running
2018-05-09 23:17:42,732 [salt.state       ][INFO    ][3581] Completed state [ntp] at time 23:17:42.732084 duration_in_ms=46.73
2018-05-09 23:17:42,732 [salt.state       ][INFO    ][3581] Running state [ntp] at time 23:17:42.732337
2018-05-09 23:17:42,732 [salt.state       ][INFO    ][3581] Executing state service.mod_watch for ntp
2018-05-09 23:17:42,733 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-05-09 23:17:42,745 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-05-09 23:17:42,760 [salt.loaded.int.module.cmdmod][INFO    ][3581] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-05-09 23:17:42,832 [salt.state       ][INFO    ][3581] {'ntp': True}
2018-05-09 23:17:42,832 [salt.state       ][INFO    ][3581] Completed state [ntp] at time 23:17:42.832873 duration_in_ms=100.536
2018-05-09 23:17:42,834 [salt.minion      ][INFO    ][3581] Returning information for job: 20180509231729702807
2018-05-09 23:17:43,834 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command file.mkdir with jid 20180509231743841931
2018-05-09 23:17:43,854 [salt.minion      ][INFO    ][4857] Starting a new job with PID 4857
2018-05-09 23:17:43,873 [salt.minion      ][INFO    ][4857] Returning information for job: 20180509231743841931
2018-05-09 23:17:44,561 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509231744569698
2018-05-09 23:17:44,581 [salt.minion      ][INFO    ][4862] Starting a new job with PID 4862
2018-05-09 23:17:45,258 [salt.state       ][INFO    ][4862] Loading fresh modules for state activity
2018-05-09 23:17:45,317 [salt.fileclient  ][INFO    ][4862] Fetching file from saltenv 'base', ** done ** 'nfs/init.sls'
2018-05-09 23:17:45,353 [salt.fileclient  ][INFO    ][4862] Fetching file from saltenv 'base', ** done ** 'nfs/server.sls'
2018-05-09 23:17:45,384 [salt.fileclient  ][INFO    ][4862] Fetching file from saltenv 'base', ** done ** 'nfs/map.jinja'
2018-05-09 23:17:46,168 [salt.state       ][INFO    ][4862] Running state [nfs-kernel-server] at time 23:17:46.168494
2018-05-09 23:17:46,169 [salt.state       ][INFO    ][4862] Executing state pkg.installed for nfs-kernel-server
2018-05-09 23:17:46,170 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:17:46,568 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['apt-cache', '-q', 'policy', 'nfs-kernel-server'] in directory '/root'
2018-05-09 23:17:46,656 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:17:48,756 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:17:48,791 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nfs-kernel-server'] in directory '/root'
2018-05-09 23:17:54,688 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231754693524
2018-05-09 23:17:54,704 [salt.minion      ][INFO    ][6678] Starting a new job with PID 6678
2018-05-09 23:17:54,724 [salt.minion      ][INFO    ][6678] Returning information for job: 20180509231754693524
2018-05-09 23:17:56,389 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:17:56,447 [salt.state       ][INFO    ][4862] Made the following changes:
'keyutils' changed from 'absent' to '1.5.9-8ubuntu1'
'nfs-common' changed from 'absent' to '1:1.2.8-9ubuntu12.1'
'rpcbind' changed from 'absent' to '0.2.3-0.2'
'nfs-client' changed from 'absent' to '1'
'nfs-kernel-server' changed from 'absent' to '1:1.2.8-9ubuntu12.1'
'libnfsidmap2' changed from 'absent' to '0.25-5'
'portmap' changed from 'absent' to '1'
'libtirpc1' changed from 'absent' to '0.2.5-1'
'knfs' changed from 'absent' to '1'
'nfs-server' changed from 'absent' to '1'

2018-05-09 23:17:56,471 [salt.state       ][INFO    ][4862] Loading fresh modules for state activity
2018-05-09 23:17:56,501 [salt.state       ][INFO    ][4862] Completed state [nfs-kernel-server] at time 23:17:56.501857 duration_in_ms=10333.364
2018-05-09 23:17:56,514 [salt.state       ][INFO    ][4862] Running state [rpcbind] at time 23:17:56.514156
2018-05-09 23:17:56,514 [salt.state       ][INFO    ][4862] Executing state pkg.installed for rpcbind
2018-05-09 23:17:56,909 [salt.state       ][INFO    ][4862] All specified packages are already installed
2018-05-09 23:17:56,909 [salt.state       ][INFO    ][4862] Completed state [rpcbind] at time 23:17:56.909253 duration_in_ms=395.096
2018-05-09 23:17:56,909 [salt.state       ][INFO    ][4862] Running state [nfs-common] at time 23:17:56.909503
2018-05-09 23:17:56,909 [salt.state       ][INFO    ][4862] Executing state pkg.installed for nfs-common
2018-05-09 23:17:56,917 [salt.state       ][INFO    ][4862] All specified packages are already installed
2018-05-09 23:17:56,917 [salt.state       ][INFO    ][4862] Completed state [nfs-common] at time 23:17:56.917603 duration_in_ms=8.101
2018-05-09 23:17:56,919 [salt.state       ][INFO    ][4862] Running state [/etc/exports] at time 23:17:56.919577
2018-05-09 23:17:56,919 [salt.state       ][INFO    ][4862] Executing state file.managed for /etc/exports
2018-05-09 23:17:56,946 [salt.fileclient  ][INFO    ][4862] Fetching file from saltenv 'base', ** done ** 'nfs/files/exports'
2018-05-09 23:17:57,030 [salt.state       ][INFO    ][4862] File changed:
--- 
+++ 
@@ -1,10 +1,2 @@
-# /etc/exports: the access control list for filesystems which may be exported
-#		to NFS clients.  See exports(5).
-#
-# Example for NFSv2 and NFSv3:
-# /srv/homes       hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check)
-#
-# Example for NFSv4:
-# /srv/nfs4        gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check)
-# /srv/nfs4/homes  gss/krb5i(rw,sync,no_subtree_check)
-#
+
+/srv/nova/instances 172.16.10.36/24(rw,no_root_squash,async)
2018-05-09 23:17:57,030 [salt.state       ][INFO    ][4862] Completed state [/etc/exports] at time 23:17:57.030301 duration_in_ms=110.724
2018-05-09 23:17:57,031 [salt.state       ][INFO    ][4862] Running state [nfs-kernel-server] at time 23:17:57.031138
2018-05-09 23:17:57,031 [salt.state       ][INFO    ][4862] Executing state service.running for nfs-kernel-server
2018-05-09 23:17:57,031 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemctl', 'status', 'nfs-kernel-server.service', '-n', '0'] in directory '/root'
2018-05-09 23:17:57,046 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemctl', 'is-active', 'nfs-kernel-server.service'] in directory '/root'
2018-05-09 23:17:57,057 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemctl', 'is-enabled', 'nfs-kernel-server.service'] in directory '/root'
2018-05-09 23:17:57,068 [salt.state       ][INFO    ][4862] The service nfs-kernel-server is already running
2018-05-09 23:17:57,069 [salt.state       ][INFO    ][4862] Completed state [nfs-kernel-server] at time 23:17:57.069209 duration_in_ms=38.071
2018-05-09 23:17:57,069 [salt.state       ][INFO    ][4862] Running state [nfs-kernel-server] at time 23:17:57.069462
2018-05-09 23:17:57,069 [salt.state       ][INFO    ][4862] Executing state service.mod_watch for nfs-kernel-server
2018-05-09 23:17:57,070 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemctl', 'is-active', 'nfs-kernel-server.service'] in directory '/root'
2018-05-09 23:17:57,081 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemctl', 'is-enabled', 'nfs-kernel-server.service'] in directory '/root'
2018-05-09 23:17:57,094 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nfs-kernel-server.service'] in directory '/root'
2018-05-09 23:17:57,200 [salt.state       ][INFO    ][4862] {'nfs-kernel-server': True}
2018-05-09 23:17:57,200 [salt.state       ][INFO    ][4862] Completed state [nfs-kernel-server] at time 23:17:57.200797 duration_in_ms=131.333
2018-05-09 23:17:57,201 [salt.state       ][INFO    ][4862] Running state [rpcbind] at time 23:17:57.201352
2018-05-09 23:17:57,201 [salt.state       ][INFO    ][4862] Executing state service.running for rpcbind
2018-05-09 23:17:57,202 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemctl', 'status', 'rpcbind.service', '-n', '0'] in directory '/root'
2018-05-09 23:17:57,221 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemctl', 'is-active', 'rpcbind.service'] in directory '/root'
2018-05-09 23:17:57,239 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemctl', 'is-enabled', 'rpcbind.service'] in directory '/root'
2018-05-09 23:17:57,252 [salt.state       ][INFO    ][4862] The service rpcbind is already running
2018-05-09 23:17:57,252 [salt.state       ][INFO    ][4862] Completed state [rpcbind] at time 23:17:57.252688 duration_in_ms=51.337
2018-05-09 23:17:57,253 [salt.state       ][INFO    ][4862] Running state [rpcbind] at time 23:17:57.252987
2018-05-09 23:17:57,253 [salt.state       ][INFO    ][4862] Executing state service.mod_watch for rpcbind
2018-05-09 23:17:57,254 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemctl', 'is-active', 'rpcbind.service'] in directory '/root'
2018-05-09 23:17:57,271 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemctl', 'is-enabled', 'rpcbind.service'] in directory '/root'
2018-05-09 23:17:57,289 [salt.loaded.int.module.cmdmod][INFO    ][4862] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rpcbind.service'] in directory '/root'
2018-05-09 23:17:57,322 [salt.state       ][INFO    ][4862] {'rpcbind': True}
2018-05-09 23:17:57,323 [salt.state       ][INFO    ][4862] Completed state [rpcbind] at time 23:17:57.323231 duration_in_ms=70.243
2018-05-09 23:17:57,325 [salt.minion      ][INFO    ][4862] Returning information for job: 20180509231744569698
2018-05-09 23:18:14,801 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509231814813479
2018-05-09 23:18:14,822 [salt.minion      ][INFO    ][7013] Starting a new job with PID 7013
2018-05-09 23:18:15,507 [salt.state       ][INFO    ][7013] Loading fresh modules for state activity
2018-05-09 23:18:15,560 [salt.fileclient  ][INFO    ][7013] Fetching file from saltenv 'base', ** done ** 'rabbitmq/init.sls'
2018-05-09 23:18:15,599 [salt.fileclient  ][INFO    ][7013] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/init.sls'
2018-05-09 23:18:15,623 [salt.fileclient  ][INFO    ][7013] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/service.sls'
2018-05-09 23:18:15,682 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command 'cat /var/lib/rabbitmq/.erlang.cookie' in directory '/root'
2018-05-09 23:18:15,699 [salt.loaded.int.module.cmdmod][ERROR   ][7013] Command 'cat /var/lib/rabbitmq/.erlang.cookie' failed with return code: 1
2018-05-09 23:18:15,700 [salt.loaded.int.module.cmdmod][ERROR   ][7013] output: cat: /var/lib/rabbitmq/.erlang.cookie: No such file or directory
2018-05-09 23:18:15,745 [salt.fileclient  ][INFO    ][7013] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/ssl.sls'
2018-05-09 23:18:15,818 [salt.fileclient  ][INFO    ][7013] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/plugin.sls'
2018-05-09 23:18:15,881 [salt.fileclient  ][INFO    ][7013] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/vhost.sls'
2018-05-09 23:18:15,986 [salt.fileclient  ][INFO    ][7013] Fetching file from saltenv 'base', ** done ** 'rabbitmq/server/user.sls'
2018-05-09 23:18:16,806 [salt.state       ][INFO    ][7013] Running state [rabbitmq-server] at time 23:18:16.806478
2018-05-09 23:18:16,807 [salt.state       ][INFO    ][7013] Executing state pkg.installed for rabbitmq-server
2018-05-09 23:18:16,807 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:18:17,220 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['apt-cache', '-q', 'policy', 'rabbitmq-server'] in directory '/root'
2018-05-09 23:18:17,316 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:18:19,536 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:18:19,569 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'rabbitmq-server'] in directory '/root'
2018-05-09 23:18:24,929 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231824934466
2018-05-09 23:18:24,948 [salt.minion      ][INFO    ][7568] Starting a new job with PID 7568
2018-05-09 23:18:24,971 [salt.minion      ][INFO    ][7568] Returning information for job: 20180509231824934466
2018-05-09 23:18:31,189 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:18:31,240 [salt.state       ][INFO    ][7013] Made the following changes:
'libltdl7' changed from 'absent' to '2.4.6-0.1'
'erlang-asn1' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-inets' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-snmp' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-percept' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-abi-17.0' changed from 'absent' to '1'
'erlang-ic' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-os-mon' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'libodbc1' changed from 'absent' to '2.3.1-4.1'
'erlang-syntax-tools' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'rabbitmq-server' changed from 'absent' to '3.5.7-1ubuntu0.16.04.2'
'erlang-ssl' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-ssh' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'libsctp1' changed from 'absent' to '1.0.16+dfsg-3'
'erlang-runtime-tools' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-eunit' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-tools' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-odbc' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-parsetools' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-public-key' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-diameter' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-corba' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-xmerl' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-nox' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-eldap' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-edoc' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-mnesia' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-webtool' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-crypto' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-erl-docgen' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'
'erlang-abi-15.b' changed from 'absent' to '1'
'erlang-base' changed from 'absent' to '1:18.3-dfsg-1ubuntu3.1'

2018-05-09 23:18:31,265 [salt.state       ][INFO    ][7013] Loading fresh modules for state activity
2018-05-09 23:18:31,295 [salt.state       ][INFO    ][7013] Completed state [rabbitmq-server] at time 23:18:31.295726 duration_in_ms=14489.248
2018-05-09 23:18:31,299 [salt.state       ][INFO    ][7013] Running state [/etc/rabbitmq/rabbitmq.config] at time 23:18:31.299794
2018-05-09 23:18:31,300 [salt.state       ][INFO    ][7013] Executing state file.managed for /etc/rabbitmq/rabbitmq.config
2018-05-09 23:18:31,333 [salt.fileclient  ][INFO    ][7013] Fetching file from saltenv 'base', ** done ** 'rabbitmq/files/rabbitmq.config'
2018-05-09 23:18:31,402 [salt.state       ][INFO    ][7013] File changed:
New file
2018-05-09 23:18:31,402 [salt.state       ][INFO    ][7013] Completed state [/etc/rabbitmq/rabbitmq.config] at time 23:18:31.402466 duration_in_ms=102.672
2018-05-09 23:18:31,403 [salt.state       ][INFO    ][7013] Running state [/etc/default/rabbitmq-server] at time 23:18:31.403089
2018-05-09 23:18:31,403 [salt.state       ][INFO    ][7013] Executing state file.managed for /etc/default/rabbitmq-server
2018-05-09 23:18:31,421 [salt.fileclient  ][INFO    ][7013] Fetching file from saltenv 'base', ** done ** 'rabbitmq/files/default'
2018-05-09 23:18:31,462 [salt.state       ][INFO    ][7013] File changed:
--- 
+++ 
@@ -1,3 +1,6 @@
+
+# Managed by Salt
+
 # This file is sourced by /etc/init.d/rabbitmq-server. Its primary
 # reason for existing is to allow adjustment of system limits for the
 # rabbitmq-server process.
@@ -6,4 +9,5 @@
 # to handle many simultaneous connections. Refer to the system
 # documentation for ulimit (in man bash) for more information.
 #
-#ulimit -n 1024
+
+ulimit -n 8192
2018-05-09 23:18:31,462 [salt.state       ][INFO    ][7013] Completed state [/etc/default/rabbitmq-server] at time 23:18:31.462761 duration_in_ms=59.672
2018-05-09 23:18:31,463 [salt.state       ][INFO    ][7013] Running state [/etc/systemd/system/rabbitmq-server.service.d/limits.conf] at time 23:18:31.463120
2018-05-09 23:18:31,463 [salt.state       ][INFO    ][7013] Executing state file.managed for /etc/systemd/system/rabbitmq-server.service.d/limits.conf
2018-05-09 23:18:31,485 [salt.fileclient  ][INFO    ][7013] Fetching file from saltenv 'base', ** done ** 'rabbitmq/files/limits.conf'
2018-05-09 23:18:31,522 [salt.state       ][INFO    ][7013] File changed:
New file
2018-05-09 23:18:31,523 [salt.state       ][INFO    ][7013] Completed state [/etc/systemd/system/rabbitmq-server.service.d/limits.conf] at time 23:18:31.523380 duration_in_ms=60.26
2018-05-09 23:18:31,526 [salt.state       ][INFO    ][7013] Running state [sleep 30] at time 23:18:31.526214
2018-05-09 23:18:31,526 [salt.state       ][INFO    ][7013] Executing state cmd.run for sleep 30
2018-05-09 23:18:31,526 [py.warnings      ][WARNING ][7013] /usr/lib/python2.7/dist-packages/salt/states/cmd.py:815: DeprecationWarning: The legacy user/group arguments are deprecated. Replace them with runas. These arguments will be removed in Salt Oxygen.

2018-05-09 23:18:31,529 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command 'sleep 30' as user 'root' in directory '/root'
2018-05-09 23:18:35,152 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231835156598
2018-05-09 23:18:35,172 [salt.minion      ][INFO    ][8583] Starting a new job with PID 8583
2018-05-09 23:18:35,194 [salt.minion      ][INFO    ][8583] Returning information for job: 20180509231835156598
2018-05-09 23:18:45,172 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231845176427
2018-05-09 23:18:45,196 [salt.minion      ][INFO    ][8590] Starting a new job with PID 8590
2018-05-09 23:18:45,216 [salt.minion      ][INFO    ][8590] Returning information for job: 20180509231845176427
2018-05-09 23:18:55,397 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231855401673
2018-05-09 23:18:55,418 [salt.minion      ][INFO    ][8597] Starting a new job with PID 8597
2018-05-09 23:18:55,441 [salt.minion      ][INFO    ][8597] Returning information for job: 20180509231855401673
2018-05-09 23:19:01,633 [salt.state       ][INFO    ][7013] {'pid': 8553, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:19:01,636 [salt.state       ][INFO    ][7013] Completed state [sleep 30] at time 23:19:01.636357 duration_in_ms=30110.141
2018-05-09 23:19:01,638 [salt.state       ][INFO    ][7013] Running state [service rabbitmq-server stop] at time 23:19:01.638695
2018-05-09 23:19:01,639 [salt.state       ][INFO    ][7013] Executing state cmd.run for service rabbitmq-server stop
2018-05-09 23:19:01,640 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command 'service rabbitmq-server stop' in directory '/root'
2018-05-09 23:19:02,509 [salt.state       ][INFO    ][7013] {'pid': 8602, 'retcode': 0, 'stderr': "Warning: rabbitmq-server.service changed on disk. Run 'systemctl daemon-reload' to reload units.", 'stdout': ''}
2018-05-09 23:19:02,510 [salt.state       ][INFO    ][7013] Completed state [service rabbitmq-server stop] at time 23:19:02.510065 duration_in_ms=871.37
2018-05-09 23:19:02,510 [salt.state       ][INFO    ][7013] Running state [/var/lib/rabbitmq] at time 23:19:02.510548
2018-05-09 23:19:02,510 [salt.state       ][INFO    ][7013] Executing state file.directory for /var/lib/rabbitmq
2018-05-09 23:19:02,512 [salt.state       ][INFO    ][7013] Directory /var/lib/rabbitmq is in the correct state
2018-05-09 23:19:02,512 [salt.state       ][INFO    ][7013] Completed state [/var/lib/rabbitmq] at time 23:19:02.512288 duration_in_ms=1.74
2018-05-09 23:19:02,513 [salt.state       ][INFO    ][7013] Running state [/var/lib/rabbitmq/.erlang.cookie] at time 23:19:02.513949
2018-05-09 23:19:02,514 [salt.state       ][INFO    ][7013] Executing state file.managed for /var/lib/rabbitmq/.erlang.cookie
2018-05-09 23:19:02,517 [salt.state       ][INFO    ][7013] File changed:
--- 
+++ 
@@ -1 +1 @@
-EYPBCIEDJLYYIIWYREKY+opnfv_secret

2018-05-09 23:19:02,517 [salt.state       ][INFO    ][7013] Completed state [/var/lib/rabbitmq/.erlang.cookie] at time 23:19:02.517804 duration_in_ms=3.855
2018-05-09 23:19:02,518 [salt.state       ][INFO    ][7013] Running state [sleep 30] at time 23:19:02.518278
2018-05-09 23:19:02,518 [salt.state       ][INFO    ][7013] Executing state cmd.run for sleep 30
2018-05-09 23:19:02,519 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command 'sleep 30' as user 'root' in directory '/root'
2018-05-09 23:19:05,630 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231905625427
2018-05-09 23:19:05,649 [salt.minion      ][INFO    ][8784] Starting a new job with PID 8784
2018-05-09 23:19:05,680 [salt.minion      ][INFO    ][8784] Returning information for job: 20180509231905625427
2018-05-09 23:19:15,665 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231915657751
2018-05-09 23:19:15,686 [salt.minion      ][INFO    ][8789] Starting a new job with PID 8789
2018-05-09 23:19:15,705 [salt.minion      ][INFO    ][8789] Returning information for job: 20180509231915657751
2018-05-09 23:19:25,687 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231925671929
2018-05-09 23:19:25,709 [salt.minion      ][INFO    ][8794] Starting a new job with PID 8794
2018-05-09 23:19:25,731 [salt.minion      ][INFO    ][8794] Returning information for job: 20180509231925671929
2018-05-09 23:19:32,617 [salt.state       ][INFO    ][7013] {'pid': 8759, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:19:32,619 [salt.state       ][INFO    ][7013] Completed state [sleep 30] at time 23:19:32.619224 duration_in_ms=30100.944
2018-05-09 23:19:32,985 [salt.state       ][INFO    ][7013] Running state [rabbitmq-server] at time 23:19:32.985595
2018-05-09 23:19:32,985 [salt.state       ][INFO    ][7013] Executing state service.running for rabbitmq-server
2018-05-09 23:19:32,986 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['systemctl', 'status', 'rabbitmq-server.service', '-n', '0'] in directory '/root'
2018-05-09 23:19:33,008 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-05-09 23:19:33,135 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['systemctl', 'status', 'rabbitmq-server.service', '-n', '0'] in directory '/root'
2018-05-09 23:19:33,160 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['systemctl', 'is-active', 'rabbitmq-server.service'] in directory '/root'
2018-05-09 23:19:33,182 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['systemctl', 'is-enabled', 'rabbitmq-server.service'] in directory '/root'
2018-05-09 23:19:33,205 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['systemctl', 'is-enabled', 'rabbitmq-server.service'] in directory '/root'
2018-05-09 23:19:33,228 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'rabbitmq-server.service'] in directory '/root'
2018-05-09 23:19:34,584 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['systemctl', 'is-active', 'rabbitmq-server.service'] in directory '/root'
2018-05-09 23:19:34,605 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['systemctl', 'is-enabled', 'rabbitmq-server.service'] in directory '/root'
2018-05-09 23:19:34,622 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['systemctl', 'is-enabled', 'rabbitmq-server.service'] in directory '/root'
2018-05-09 23:19:34,640 [salt.state       ][INFO    ][7013] {'rabbitmq-server': True}
2018-05-09 23:19:34,641 [salt.state       ][INFO    ][7013] Completed state [rabbitmq-server] at time 23:19:34.641733 duration_in_ms=1656.137
2018-05-09 23:19:34,646 [salt.state       ][INFO    ][7013] Running state [amqp_client] at time 23:19:34.646078
2018-05-09 23:19:34,646 [salt.state       ][INFO    ][7013] Executing state rabbitmq_plugin.enabled for amqp_client
2018-05-09 23:19:34,647 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['/usr/sbin/rabbitmq-plugins', 'list', '-m', '-e'] as user 'root' in directory '/root'
2018-05-09 23:19:35,259 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['/usr/sbin/rabbitmq-plugins', 'enable', 'amqp_client'] as user 'root' in directory '/root'
2018-05-09 23:19:35,714 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231935693659
2018-05-09 23:19:35,735 [salt.minion      ][INFO    ][9413] Starting a new job with PID 9413
2018-05-09 23:19:35,756 [salt.minion      ][INFO    ][9413] Returning information for job: 20180509231935693659
2018-05-09 23:19:36,041 [salt.state       ][INFO    ][7013] {'new': 'amqp_client', 'old': ''}
2018-05-09 23:19:36,042 [salt.state       ][INFO    ][7013] Completed state [amqp_client] at time 23:19:36.041720 duration_in_ms=1395.639
2018-05-09 23:19:36,043 [salt.state       ][INFO    ][7013] Running state [rabbitmq_management] at time 23:19:36.043204
2018-05-09 23:19:36,044 [salt.state       ][INFO    ][7013] Executing state rabbitmq_plugin.enabled for rabbitmq_management
2018-05-09 23:19:36,045 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['/usr/sbin/rabbitmq-plugins', 'list', '-m', '-e'] as user 'root' in directory '/root'
2018-05-09 23:19:36,685 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['/usr/sbin/rabbitmq-plugins', 'enable', 'rabbitmq_management'] as user 'root' in directory '/root'
2018-05-09 23:19:37,928 [salt.state       ][INFO    ][7013] {'new': 'rabbitmq_management', 'old': ''}
2018-05-09 23:19:37,928 [salt.state       ][INFO    ][7013] Completed state [rabbitmq_management] at time 23:19:37.928839 duration_in_ms=1885.635
2018-05-09 23:19:37,932 [salt.state       ][INFO    ][7013] Running state [/openstack] at time 23:19:37.932877
2018-05-09 23:19:37,933 [salt.state       ][INFO    ][7013] Executing state rabbitmq_vhost.present for /openstack
2018-05-09 23:19:37,934 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command 'rabbitmqctl list_vhosts -q' as user 'root' in directory '/root'
2018-05-09 23:19:38,955 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'add_vhost', '/openstack'] as user 'root' in directory '/root'
2018-05-09 23:19:39,978 [salt.state       ][INFO    ][7013] {'new': '/openstack', 'old': ''}
2018-05-09 23:19:39,979 [salt.state       ][INFO    ][7013] Completed state [/openstack] at time 23:19:39.979179 duration_in_ms=2046.301
2018-05-09 23:19:39,983 [salt.state       ][INFO    ][7013] Running state [openstack] at time 23:19:39.983862
2018-05-09 23:19:39,984 [salt.state       ][INFO    ][7013] Executing state rabbitmq_user.present for openstack
2018-05-09 23:19:39,984 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'list_users'] as user 'root' in directory '/root'
2018-05-09 23:19:42,071 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'list_user_permissions', 'openstack'] as user 'root' in directory '/root'
2018-05-09 23:19:43,135 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'set_permissions', '-p', '/openstack', 'openstack', '.*', '.*', '.*'] as user 'root' in directory '/root'
2018-05-09 23:19:44,187 [salt.state       ][INFO    ][7013] Made the following changes:
'perms' changed from 'absent' to '{'/openstack': ['.*', '.*', '.*']}'
'user' changed from 'absent' to 'openstack'

2018-05-09 23:19:44,188 [salt.state       ][INFO    ][7013] Completed state [openstack] at time 23:19:44.188217 duration_in_ms=4204.355
2018-05-09 23:19:44,192 [salt.state       ][INFO    ][7013] Running state [Ceilometer] at time 23:19:44.192102
2018-05-09 23:19:44,192 [salt.state       ][INFO    ][7013] Executing state rabbitmq_policy.present for Ceilometer
2018-05-09 23:19:44,193 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'list_policies', '-p', '/openstack'] as user 'root' in directory '/root'
2018-05-09 23:19:45,213 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'set_policy', '-p', '/openstack', '--priority', 10, 'Ceilometer', '^metering.sample$', '{"ha-mode": "all", "message-ttl": 10800000}'] as user 'root' in directory '/root'
2018-05-09 23:19:45,945 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231945921569
2018-05-09 23:19:45,960 [salt.minion      ][INFO    ][11003] Starting a new job with PID 11003
2018-05-09 23:19:45,976 [salt.minion      ][INFO    ][11003] Returning information for job: 20180509231945921569
2018-05-09 23:19:46,264 [salt.state       ][INFO    ][7013] {'new': 'Ceilometer', 'old': {}}
2018-05-09 23:19:46,264 [salt.state       ][INFO    ][7013] Completed state [Ceilometer] at time 23:19:46.264829 duration_in_ms=2072.727
2018-05-09 23:19:46,271 [salt.state       ][INFO    ][7013] Running state [HA] at time 23:19:46.271709
2018-05-09 23:19:46,272 [salt.state       ][INFO    ][7013] Executing state rabbitmq_policy.present for HA
2018-05-09 23:19:46,273 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'list_policies', '-p', '/openstack'] as user 'root' in directory '/root'
2018-05-09 23:19:47,277 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'set_policy', '-p', '/openstack', 'HA', '^(?!amq\\.).*', '{"ha-mode": "all", "message-ttl": 120000}'] as user 'root' in directory '/root'
2018-05-09 23:19:48,321 [salt.state       ][INFO    ][7013] {'new': 'HA', 'old': {}}
2018-05-09 23:19:48,321 [salt.state       ][INFO    ][7013] Completed state [HA] at time 23:19:48.321554 duration_in_ms=2049.847
2018-05-09 23:19:48,322 [salt.state       ][INFO    ][7013] Running state [guest] at time 23:19:48.321974
2018-05-09 23:19:48,323 [salt.state       ][INFO    ][7013] Executing state rabbitmq_user.present for guest
2018-05-09 23:19:48,323 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'list_users'] as user 'root' in directory '/root'
2018-05-09 23:19:49,333 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'status'] as user 'root' in directory '/root'
2018-05-09 23:19:52,440 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'list_user_permissions', 'guest'] as user 'root' in directory '/root'
2018-05-09 23:19:53,441 [salt.state       ][INFO    ][7013] Made the following changes:
'password' changed from 'absent' to 'Set password.'

2018-05-09 23:19:53,442 [salt.state       ][INFO    ][7013] Completed state [guest] at time 23:19:53.442217 duration_in_ms=5120.243
2018-05-09 23:19:53,443 [salt.state       ][INFO    ][7013] Running state [HA] at time 23:19:53.443808
2018-05-09 23:19:53,444 [salt.state       ][INFO    ][7013] Executing state rabbitmq_policy.present for HA
2018-05-09 23:19:53,444 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'list_policies', '-p', '/'] as user 'root' in directory '/root'
2018-05-09 23:19:54,482 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'set_policy', '-p', '/', 'HA', '^(?!amq\\.).*', '{"ha-mode": "all", "message-ttl": 120000}'] as user 'root' in directory '/root'
2018-05-09 23:19:55,475 [salt.state       ][INFO    ][7013] {'new': 'HA', 'old': {}}
2018-05-09 23:19:55,476 [salt.state       ][INFO    ][7013] Completed state [HA] at time 23:19:55.476005 duration_in_ms=2032.195
2018-05-09 23:19:55,476 [salt.state       ][INFO    ][7013] Running state [admin] at time 23:19:55.476722
2018-05-09 23:19:55,477 [salt.state       ][INFO    ][7013] Executing state rabbitmq_user.present for admin
2018-05-09 23:19:55,478 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'list_users'] as user 'root' in directory '/root'
2018-05-09 23:19:56,171 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509231956149103
2018-05-09 23:19:56,188 [salt.minion      ][INFO    ][12639] Starting a new job with PID 12639
2018-05-09 23:19:56,212 [salt.minion      ][INFO    ][12639] Returning information for job: 20180509231956149103
2018-05-09 23:19:57,560 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'list_users'] as user 'root' in directory '/root'
2018-05-09 23:19:58,557 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'set_user_tags', 'admin', 'administrator'] as user 'root' in directory '/root'
2018-05-09 23:19:59,585 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'list_user_permissions', 'admin'] as user 'root' in directory '/root'
2018-05-09 23:20:00,631 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'set_permissions', '-p', '/openstack', 'admin', '.*', '.*', '.*'] as user 'root' in directory '/root'
2018-05-09 23:20:01,640 [salt.loaded.int.module.cmdmod][INFO    ][7013] Executing command ['rabbitmqctl', 'set_permissions', '-p', '/', 'admin', '.*', '.*', '.*'] as user 'root' in directory '/root'
2018-05-09 23:20:02,699 [salt.state       ][INFO    ][7013] Made the following changes:
'perms' changed from 'absent' to '{'/openstack': ['.*', '.*', '.*'], '/': ['.*', '.*', '.*']}'
'user' changed from 'absent' to 'admin'
'tags' changed from '['']' to '['administrator']'

2018-05-09 23:20:02,700 [salt.state       ][INFO    ][7013] Completed state [admin] at time 23:20:02.700004 duration_in_ms=7223.282
2018-05-09 23:20:02,702 [salt.minion      ][INFO    ][7013] Returning information for job: 20180509231814813479
2018-05-09 23:20:03,385 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command cmd.run with jid 20180509232003368745
2018-05-09 23:20:03,403 [salt.minion      ][INFO    ][13637] Starting a new job with PID 13637
2018-05-09 23:20:03,412 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][13637] Executing command 'rabbitmqctl status' in directory '/root'
2018-05-09 23:20:04,362 [salt.minion      ][INFO    ][13637] Returning information for job: 20180509232003368745
2018-05-09 23:20:05,029 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232005010756
2018-05-09 23:20:05,048 [salt.minion      ][INFO    ][13753] Starting a new job with PID 13753
2018-05-09 23:20:07,471 [salt.state       ][INFO    ][13753] Loading fresh modules for state activity
2018-05-09 23:20:07,524 [salt.fileclient  ][INFO    ][13753] Fetching file from saltenv 'base', ** done ** 'mysql/init.sls'
2018-05-09 23:20:07,559 [salt.fileclient  ][INFO    ][13753] Fetching file from saltenv 'base', ** done ** 'mysql/server/init.sls'
2018-05-09 23:20:07,582 [salt.fileclient  ][INFO    ][13753] Fetching file from saltenv 'base', ** done ** 'mysql/server/service.sls'
2018-05-09 23:20:07,659 [salt.fileclient  ][INFO    ][13753] Fetching file from saltenv 'base', ** done ** 'mysql/common.sls'
2018-05-09 23:20:07,739 [salt.fileclient  ][INFO    ][13753] Fetching file from saltenv 'base', ** done ** 'mysql/server/database.sls'
2018-05-09 23:20:08,767 [salt.state       ][INFO    ][13753] Running state [mysql-server-5.7] at time 23:20:08.767247
2018-05-09 23:20:08,767 [salt.state       ][INFO    ][13753] Executing state pkg.installed for mysql-server-5.7
2018-05-09 23:20:08,768 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:20:09,187 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['apt-cache', '-q', 'policy', 'mysql-server-5.7'] in directory '/root'
2018-05-09 23:20:09,283 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:20:11,418 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:20:11,455 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'mysql-server-5.7'] in directory '/root'
2018-05-09 23:20:15,155 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232015131700
2018-05-09 23:20:15,172 [salt.minion      ][INFO    ][14192] Starting a new job with PID 14192
2018-05-09 23:20:15,192 [salt.minion      ][INFO    ][14192] Returning information for job: 20180509232015131700
2018-05-09 23:20:25,377 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232025352669
2018-05-09 23:20:25,398 [salt.minion      ][INFO    ][15578] Starting a new job with PID 15578
2018-05-09 23:20:25,421 [salt.minion      ][INFO    ][15578] Returning information for job: 20180509232025352669
2018-05-09 23:20:31,788 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:20:31,842 [salt.state       ][INFO    ][13753] Made the following changes:
'libhtml-parser-perl' changed from 'absent' to '3.72-1'
'virtual-mysql-client' changed from 'absent' to '1'
'libencode-locale-perl' changed from 'absent' to '1.05-1'
'mysql-common-5.6' changed from 'absent' to '1'
'libhttp-message-perl' changed from 'absent' to '6.11-1'
'liburi-perl' changed from 'absent' to '1.71-1'
'mysql-client-core-5.7' changed from 'absent' to '5.7.22-0ubuntu0.16.04.1'
'mysql-client-5.7' changed from 'absent' to '5.7.22-0ubuntu0.16.04.1'
'timedate' changed from 'absent' to '1'
'mysql-server-5.7' changed from 'absent' to '5.7.22-0ubuntu0.16.04.1'
'libfcgi-perl' changed from 'absent' to '0.77-1build1'
'mysql-common' changed from 'absent' to '5.7.22-0ubuntu0.16.04.1'
'libcgi-fast-perl' changed from 'absent' to '1:2.10-1'
'mysql-server-core-5.7' changed from 'absent' to '5.7.22-0ubuntu0.16.04.1'
'libaio1' changed from 'absent' to '0.3.110-2'
'libcgi-pm-perl' changed from 'absent' to '4.26-1'
'liblwp-mediatypes-perl' changed from 'absent' to '6.02-1'
'virtual-mysql-server' changed from 'absent' to '1'
'libevent-core-2.0-5' changed from 'absent' to '2.0.21-stable-2ubuntu0.16.04.1'
'virtual-mysql-client-core' changed from 'absent' to '1'
'libhtml-template-perl' changed from 'absent' to '2.95-2'
'libhttp-date-perl' changed from 'absent' to '6.02-1'
'libtimedate-perl' changed from 'absent' to '2.3000-2'
'virtual-mysql-server-core' changed from 'absent' to '1'
'libhtml-tagset-perl' changed from 'absent' to '3.20-2'
'libio-html-perl' changed from 'absent' to '1.001-1'

2018-05-09 23:20:31,866 [salt.state       ][INFO    ][13753] Loading fresh modules for state activity
2018-05-09 23:20:31,899 [salt.state       ][INFO    ][13753] Completed state [mysql-server-5.7] at time 23:20:31.899578 duration_in_ms=23132.331
2018-05-09 23:20:31,911 [salt.state       ][INFO    ][13753] Running state [python-mysqldb] at time 23:20:31.911019
2018-05-09 23:20:31,911 [salt.state       ][INFO    ][13753] Executing state pkg.installed for python-mysqldb
2018-05-09 23:20:32,323 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:20:32,350 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-mysqldb'] in directory '/root'
2018-05-09 23:20:34,834 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:20:34,886 [salt.state       ][INFO    ][13753] Made the following changes:
'python2.7-mysqldb' changed from 'absent' to '1'
'libmysqlclient20' changed from 'absent' to '5.7.22-0ubuntu0.16.04.1'
'python-mysqldb' changed from 'absent' to '1.3.7-1build2'

2018-05-09 23:20:34,905 [salt.state       ][INFO    ][13753] Loading fresh modules for state activity
2018-05-09 23:20:34,936 [salt.state       ][INFO    ][13753] Completed state [python-mysqldb] at time 23:20:34.936547 duration_in_ms=3025.528
2018-05-09 23:20:34,947 [salt.state       ][INFO    ][13753] Running state [debconf-utils] at time 23:20:34.947826
2018-05-09 23:20:34,948 [salt.state       ][INFO    ][13753] Executing state pkg.installed for debconf-utils
2018-05-09 23:20:35,339 [salt.state       ][INFO    ][13753] All specified packages are already installed
2018-05-09 23:20:35,340 [salt.state       ][INFO    ][13753] Completed state [debconf-utils] at time 23:20:35.340262 duration_in_ms=392.434
2018-05-09 23:20:35,341 [salt.state       ][INFO    ][13753] Running state [mariadb-server] at time 23:20:35.341664
2018-05-09 23:20:35,342 [salt.state       ][INFO    ][13753] Executing state debconf.set for mariadb-server
2018-05-09 23:20:35,342 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command 'debconf-get-selections' in directory '/root'
2018-05-09 23:20:35,565 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232035369927
2018-05-09 23:20:35,577 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command 'debconf-set-selections /tmp/salt-ItrQur' in directory '/root'
2018-05-09 23:20:35,583 [salt.minion      ][INFO    ][15978] Starting a new job with PID 15978
2018-05-09 23:20:35,605 [salt.minion      ][INFO    ][15978] Returning information for job: 20180509232035369927
2018-05-09 23:20:35,753 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command 'debconf-set-selections /tmp/salt-5PsmgV' in directory '/root'
2018-05-09 23:20:35,926 [salt.state       ][INFO    ][13753] {'mysql-server/root_password': 'opnfv_secret', 'mysql-server/root_password_again': 'opnfv_secret'}
2018-05-09 23:20:35,927 [salt.state       ][INFO    ][13753] Completed state [mariadb-server] at time 23:20:35.927848 duration_in_ms=586.181
2018-05-09 23:20:35,934 [salt.state       ][INFO    ][13753] Running state [/etc/mysql/my.cnf] at time 23:20:35.934465
2018-05-09 23:20:35,935 [salt.state       ][INFO    ][13753] Executing state file.managed for /etc/mysql/my.cnf
2018-05-09 23:20:35,967 [salt.fileclient  ][INFO    ][13753] Fetching file from saltenv 'base', ** done ** 'mysql/conf/my.cnf.Debian'
2018-05-09 23:20:36,026 [salt.state       ][INFO    ][13753] File changed:
--- 
+++ 
@@ -1,10 +1,11 @@
+
 #
 # The MySQL database server configuration file.
 #
 # You can copy this to one of:
 # - "/etc/mysql/my.cnf" to set global options,
 # - "~/.my.cnf" to set user-specific options.
-# 
+#
 # One can use all long options that the program supports.
 # Run program with --help to get a list of available options and with
 # --print-defaults to see which it would actually understand and use.
@@ -12,10 +13,111 @@
 # For explanations see
 # http://dev.mysql.com/doc/mysql/en/server-system-variables.html
 
+# This will be passed to all mysql clients
+# It has been reported that passwords should be enclosed with ticks/quotes
+# escpecially if they contain "#" chars...
+# Remember to edit /etc/mysql/debian.cnf when changing the socket location.
+
+[client]
+port           = 3306
+socket         = /var/run/mysqld/mysqld.sock
+default-character-set=utf8
+
+# Here is entries for some specific programs
+# The following values assume you have at least 32M ram
+
+# This was formally known as [safe_mysqld]. Both versions are currently parsed.
+[mysqld_safe]
+socket         = /var/run/mysqld/mysqld.sock
+nice           = 0
+
+[mysqld]
+#
+# * Basic Settings
+#
+user           = mysql
+pid-file       = /var/run/mysqld/mysqld.pid
+socket         = /var/run/mysqld/mysqld.sock
+port           = 3306
+basedir        = /usr
+datadir        = /var/lib/mysql
+tmpdir         = /tmp
+lc-messages-dir = /usr/share/mysql
+skip-external-locking
+
+#
+# Instead of skip-networking the default is now to listen only on
+# localhost which is more compatible and is not less secure.
+bind-address            = 172.16.10.36
+character-set-server=utf8
+
+#
+# * Fine Tuning
+#
+key_buffer_size        = 8M
+max_allowed_packet     = 128M
+thread_stack           = 512K
+thread_cache_size      = 12
+# This replaces the startup script and checks MyISAM tables if needed
+# the first time they are touched
+myisam-recover-options = BACKUP
+max_connections        = 2048
+#table_cache           = 64
+#thread_concurrency    = 10
+#
+# * Query Cache Configuration
+#
+query_cache_limit      = 2M
+query_cache_size       = 0M
+#
+# * Logging and Replication
+#
+# Both location gets rotated by the cronjob.
+# Be aware that this log type is a performance killer.
+# As of 5.1 you can enable the log at runtime!
+#general_log_file       = /var/log/mysql/mysql.log
+#general_log            = 1
+#
+# Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf.
+#
+# Here you can see queries with especially long duration
+slow_query_log = 1
+slow_query_log_file = /var/log/mysql/mysql-slow.log
+long_query_time = 2
+#log-queries-not-using-indexes
+#
+# The following can be used as easy to replay backup logs or for replication.
+# note: if you are setting up a replication slave, see README.Debian about
+#       other settings you may need to change.
+max_binlog_size         = 100M
+#binlog_ignore_db       = include_database_name
+#
+# * InnoDB
+#
+# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
+# Read the manual for more InnoDB related options. There are many!
+#
+# * Security Features
+#
+# Read the manual, too, if you want chroot!
+# chroot = /var/lib/mysql/
+#
+# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
+#
+
+[mysqldump]
+quick
+quote-names
+max_allowed_packet      = 16M
+
+[mysql]
+#no-auto-rehash # faster start of mysql but no tab completition
+
+[isamchk]
+key_buffer_size         = 16M
+
 #
 # * IMPORTANT: Additional settings that can override those from this file!
 #   The files must end with '.cnf', otherwise they'll be ignored.
 #
-
 !includedir /etc/mysql/conf.d/
-!includedir /etc/mysql/mysql.conf.d/

2018-05-09 23:20:36,035 [salt.state       ][INFO    ][13753] Completed state [/etc/mysql/my.cnf] at time 23:20:36.035246 duration_in_ms=100.78
2018-05-09 23:20:36,037 [salt.state       ][INFO    ][13753] Running state [mysql] at time 23:20:36.037828
2018-05-09 23:20:36,038 [salt.state       ][INFO    ][13753] Executing state service.running for mysql
2018-05-09 23:20:36,039 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['systemctl', 'status', 'mysql.service', '-n', '0'] in directory '/root'
2018-05-09 23:20:36,065 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['systemctl', 'is-active', 'mysql.service'] in directory '/root'
2018-05-09 23:20:36,086 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['systemctl', 'is-enabled', 'mysql.service'] in directory '/root'
2018-05-09 23:20:36,106 [salt.state       ][INFO    ][13753] The service mysql is already running
2018-05-09 23:20:36,107 [salt.state       ][INFO    ][13753] Completed state [mysql] at time 23:20:36.106972 duration_in_ms=69.145
2018-05-09 23:20:36,107 [salt.state       ][INFO    ][13753] Running state [mysql] at time 23:20:36.107239
2018-05-09 23:20:36,107 [salt.state       ][INFO    ][13753] Executing state service.mod_watch for mysql
2018-05-09 23:20:36,108 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['systemctl', 'is-active', 'mysql.service'] in directory '/root'
2018-05-09 23:20:36,123 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['systemctl', 'is-enabled', 'mysql.service'] in directory '/root'
2018-05-09 23:20:36,144 [salt.loaded.int.module.cmdmod][INFO    ][13753] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'mysql.service'] in directory '/root'
2018-05-09 23:20:38,580 [salt.state       ][INFO    ][13753] {'mysql': True}
2018-05-09 23:20:38,580 [salt.state       ][INFO    ][13753] Completed state [mysql] at time 23:20:38.580838 duration_in_ms=2473.598
2018-05-09 23:20:38,581 [salt.state       ][INFO    ][13753] Running state [/etc/mysql/conf.d] at time 23:20:38.581525
2018-05-09 23:20:38,582 [salt.state       ][INFO    ][13753] Executing state file.directory for /etc/mysql/conf.d
2018-05-09 23:20:38,583 [salt.state       ][INFO    ][13753] Directory /etc/mysql/conf.d is in the correct state
2018-05-09 23:20:38,584 [salt.state       ][INFO    ][13753] Completed state [/etc/mysql/conf.d] at time 23:20:38.584079 duration_in_ms=2.555
2018-05-09 23:20:38,585 [salt.state       ][INFO    ][13753] Running state [/root/mysql/scripts] at time 23:20:38.585768
2018-05-09 23:20:38,586 [salt.state       ][INFO    ][13753] Executing state file.directory for /root/mysql/scripts
2018-05-09 23:20:38,589 [salt.state       ][INFO    ][13753] {'/root/mysql/scripts': 'New Dir'}
2018-05-09 23:20:38,589 [salt.state       ][INFO    ][13753] Completed state [/root/mysql/scripts] at time 23:20:38.589669 duration_in_ms=3.902
2018-05-09 23:20:38,590 [salt.state       ][INFO    ][13753] Running state [/root/mysql/flags] at time 23:20:38.590285
2018-05-09 23:20:38,591 [salt.state       ][INFO    ][13753] Executing state file.directory for /root/mysql/flags
2018-05-09 23:20:38,592 [salt.state       ][INFO    ][13753] {'/root/mysql/flags': 'New Dir'}
2018-05-09 23:20:38,592 [salt.state       ][INFO    ][13753] Completed state [/root/mysql/flags] at time 23:20:38.592521 duration_in_ms=2.236
2018-05-09 23:20:38,593 [salt.state       ][INFO    ][13753] Running state [/root/mysql/data] at time 23:20:38.593131
2018-05-09 23:20:38,593 [salt.state       ][INFO    ][13753] Executing state file.directory for /root/mysql/data
2018-05-09 23:20:38,594 [salt.state       ][INFO    ][13753] {'/root/mysql/data': 'New Dir'}
2018-05-09 23:20:38,595 [salt.state       ][INFO    ][13753] Completed state [/root/mysql/data] at time 23:20:38.595102 duration_in_ms=1.971
2018-05-09 23:20:38,595 [salt.state       ][INFO    ][13753] Running state [/root/mysql/flags] at time 23:20:38.595728
2018-05-09 23:20:38,595 [salt.state       ][INFO    ][13753] Executing state file.directory for /root/mysql/flags
2018-05-09 23:20:38,596 [salt.state       ][INFO    ][13753] Directory /root/mysql/flags is in the correct state
2018-05-09 23:20:38,596 [salt.state       ][INFO    ][13753] Completed state [/root/mysql/flags] at time 23:20:38.596871 duration_in_ms=1.142
2018-05-09 23:20:38,599 [salt.state       ][INFO    ][13753] Running state [ceilometer] at time 23:20:38.598978
2018-05-09 23:20:38,599 [salt.state       ][INFO    ][13753] Executing state mysql_database.present for ceilometer
2018-05-09 23:20:38,606 [salt.loaded.int.module.mysql][INFO    ][13753] DB 'ceilometer' created
2018-05-09 23:20:38,606 [salt.state       ][INFO    ][13753] {'ceilometer': 'Present'}
2018-05-09 23:20:38,607 [salt.state       ][INFO    ][13753] Completed state [ceilometer] at time 23:20:38.607007 duration_in_ms=8.029
2018-05-09 23:20:38,608 [salt.state       ][INFO    ][13753] Running state [ceilometer] at time 23:20:38.608421
2018-05-09 23:20:38,608 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for ceilometer
2018-05-09 23:20:38,616 [py.warnings      ][WARNING ][13753] /usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1681, "'PASSWORD' is deprecated and will be removed in a future release.")
  result = self._query(query)

2018-05-09 23:20:38,631 [salt.loaded.int.module.mysql][INFO    ][13753] User 'ceilometer'@'%' has been created
2018-05-09 23:20:38,631 [salt.state       ][INFO    ][13753] {'ceilometer': 'Present'}
2018-05-09 23:20:38,631 [salt.state       ][INFO    ][13753] Completed state [ceilometer] at time 23:20:38.631770 duration_in_ms=23.349
2018-05-09 23:20:38,635 [salt.state       ][INFO    ][13753] Running state [mysql_grants_ceilometer_ceilometer_%] at time 23:20:38.635742
2018-05-09 23:20:38,636 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_ceilometer_ceilometer_%
2018-05-09 23:20:38,651 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'ceilometer.*' for user 'ceilometer' has been added
2018-05-09 23:20:38,651 [salt.state       ][INFO    ][13753] {'mysql_grants_ceilometer_ceilometer_%': 'Present'}
2018-05-09 23:20:38,651 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_ceilometer_ceilometer_%] at time 23:20:38.651460 duration_in_ms=15.719
2018-05-09 23:20:38,651 [salt.state       ][INFO    ][13753] Running state [ceilometer] at time 23:20:38.651701
2018-05-09 23:20:38,651 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for ceilometer
2018-05-09 23:20:38,666 [salt.loaded.int.module.mysql][INFO    ][13753] User 'ceilometer'@'172.16.10.36' has been created
2018-05-09 23:20:38,667 [salt.state       ][INFO    ][13753] {'ceilometer': 'Present'}
2018-05-09 23:20:38,667 [salt.state       ][INFO    ][13753] Completed state [ceilometer] at time 23:20:38.667176 duration_in_ms=15.475
2018-05-09 23:20:38,668 [salt.state       ][INFO    ][13753] Running state [mysql_grants_ceilometer_ceilometer_172.16.10.36] at time 23:20:38.668862
2018-05-09 23:20:38,669 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_ceilometer_ceilometer_172.16.10.36
2018-05-09 23:20:38,682 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'ceilometer.*' for user 'ceilometer' has been added
2018-05-09 23:20:38,682 [salt.state       ][INFO    ][13753] {'mysql_grants_ceilometer_ceilometer_172.16.10.36': 'Present'}
2018-05-09 23:20:38,683 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_ceilometer_ceilometer_172.16.10.36] at time 23:20:38.683056 duration_in_ms=14.194
2018-05-09 23:20:38,683 [salt.state       ][INFO    ][13753] Running state [aodh] at time 23:20:38.683286
2018-05-09 23:20:38,683 [salt.state       ][INFO    ][13753] Executing state mysql_database.present for aodh
2018-05-09 23:20:38,688 [salt.loaded.int.module.mysql][INFO    ][13753] DB 'aodh' created
2018-05-09 23:20:38,688 [salt.state       ][INFO    ][13753] {'aodh': 'Present'}
2018-05-09 23:20:38,688 [salt.state       ][INFO    ][13753] Completed state [aodh] at time 23:20:38.688483 duration_in_ms=5.196
2018-05-09 23:20:38,688 [salt.state       ][INFO    ][13753] Running state [aodh] at time 23:20:38.688710
2018-05-09 23:20:38,688 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for aodh
2018-05-09 23:20:38,705 [salt.loaded.int.module.mysql][INFO    ][13753] User 'aodh'@'%' has been created
2018-05-09 23:20:38,705 [salt.state       ][INFO    ][13753] {'aodh': 'Present'}
2018-05-09 23:20:38,705 [salt.state       ][INFO    ][13753] Completed state [aodh] at time 23:20:38.705842 duration_in_ms=17.132
2018-05-09 23:20:38,708 [salt.state       ][INFO    ][13753] Running state [mysql_grants_aodh_aodh_%] at time 23:20:38.708329
2018-05-09 23:20:38,708 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_aodh_aodh_%
2018-05-09 23:20:38,722 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'aodh.*' for user 'aodh' has been added
2018-05-09 23:20:38,722 [salt.state       ][INFO    ][13753] {'mysql_grants_aodh_aodh_%': 'Present'}
2018-05-09 23:20:38,722 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_aodh_aodh_%] at time 23:20:38.722645 duration_in_ms=14.316
2018-05-09 23:20:38,722 [salt.state       ][INFO    ][13753] Running state [aodh] at time 23:20:38.722870
2018-05-09 23:20:38,723 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for aodh
2018-05-09 23:20:38,739 [salt.loaded.int.module.mysql][INFO    ][13753] User 'aodh'@'10.16.0.107' has been created
2018-05-09 23:20:38,739 [salt.state       ][INFO    ][13753] {'aodh': 'Present'}
2018-05-09 23:20:38,739 [salt.state       ][INFO    ][13753] Completed state [aodh] at time 23:20:38.739627 duration_in_ms=16.756
2018-05-09 23:20:38,742 [salt.state       ][INFO    ][13753] Running state [mysql_grants_aodh_aodh_10.16.0.107] at time 23:20:38.742235
2018-05-09 23:20:38,742 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_aodh_aodh_10.16.0.107
2018-05-09 23:20:38,756 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'aodh.*' for user 'aodh' has been added
2018-05-09 23:20:38,756 [salt.state       ][INFO    ][13753] {'mysql_grants_aodh_aodh_10.16.0.107': 'Present'}
2018-05-09 23:20:38,756 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_aodh_aodh_10.16.0.107] at time 23:20:38.756885 duration_in_ms=14.651
2018-05-09 23:20:38,757 [salt.state       ][INFO    ][13753] Running state [nova] at time 23:20:38.757113
2018-05-09 23:20:38,757 [salt.state       ][INFO    ][13753] Executing state mysql_database.present for nova
2018-05-09 23:20:38,762 [salt.loaded.int.module.mysql][INFO    ][13753] DB 'nova' created
2018-05-09 23:20:38,762 [salt.state       ][INFO    ][13753] {'nova': 'Present'}
2018-05-09 23:20:38,762 [salt.state       ][INFO    ][13753] Completed state [nova] at time 23:20:38.762640 duration_in_ms=5.527
2018-05-09 23:20:38,762 [salt.state       ][INFO    ][13753] Running state [nova] at time 23:20:38.762869
2018-05-09 23:20:38,763 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for nova
2018-05-09 23:20:38,778 [salt.loaded.int.module.mysql][INFO    ][13753] User 'nova'@'%' has been created
2018-05-09 23:20:38,778 [salt.state       ][INFO    ][13753] {'nova': 'Present'}
2018-05-09 23:20:38,778 [salt.state       ][INFO    ][13753] Completed state [nova] at time 23:20:38.778893 duration_in_ms=16.024
2018-05-09 23:20:38,780 [salt.state       ][INFO    ][13753] Running state [mysql_grants_nova_nova_%] at time 23:20:38.780275
2018-05-09 23:20:38,780 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_nova_nova_%
2018-05-09 23:20:38,794 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'nova.*' for user 'nova' has been added
2018-05-09 23:20:38,794 [salt.state       ][INFO    ][13753] {'mysql_grants_nova_nova_%': 'Present'}
2018-05-09 23:20:38,795 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_nova_nova_%] at time 23:20:38.795416 duration_in_ms=15.141
2018-05-09 23:20:38,795 [salt.state       ][INFO    ][13753] Running state [nova] at time 23:20:38.795638
2018-05-09 23:20:38,795 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for nova
2018-05-09 23:20:38,810 [salt.loaded.int.module.mysql][INFO    ][13753] User 'nova'@'172.16.10.36' has been created
2018-05-09 23:20:38,810 [salt.state       ][INFO    ][13753] {'nova': 'Present'}
2018-05-09 23:20:38,810 [salt.state       ][INFO    ][13753] Completed state [nova] at time 23:20:38.810763 duration_in_ms=15.125
2018-05-09 23:20:38,812 [salt.state       ][INFO    ][13753] Running state [mysql_grants_nova_nova_172.16.10.36] at time 23:20:38.812075
2018-05-09 23:20:38,812 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_nova_nova_172.16.10.36
2018-05-09 23:20:38,825 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'nova.*' for user 'nova' has been added
2018-05-09 23:20:38,825 [salt.state       ][INFO    ][13753] {'mysql_grants_nova_nova_172.16.10.36': 'Present'}
2018-05-09 23:20:38,825 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_nova_nova_172.16.10.36] at time 23:20:38.825486 duration_in_ms=13.411
2018-05-09 23:20:38,825 [salt.state       ][INFO    ][13753] Running state [grafana] at time 23:20:38.825719
2018-05-09 23:20:38,825 [salt.state       ][INFO    ][13753] Executing state mysql_database.present for grafana
2018-05-09 23:20:38,830 [salt.loaded.int.module.mysql][INFO    ][13753] DB 'grafana' created
2018-05-09 23:20:38,830 [salt.state       ][INFO    ][13753] {'grafana': 'Present'}
2018-05-09 23:20:38,831 [salt.state       ][INFO    ][13753] Completed state [grafana] at time 23:20:38.831139 duration_in_ms=5.42
2018-05-09 23:20:38,831 [salt.state       ][INFO    ][13753] Running state [grafana] at time 23:20:38.831361
2018-05-09 23:20:38,831 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for grafana
2018-05-09 23:20:38,845 [salt.loaded.int.module.mysql][INFO    ][13753] User 'grafana'@'%' has been created
2018-05-09 23:20:38,845 [salt.state       ][INFO    ][13753] {'grafana': 'Present'}
2018-05-09 23:20:38,846 [salt.state       ][INFO    ][13753] Completed state [grafana] at time 23:20:38.846045 duration_in_ms=14.684
2018-05-09 23:20:38,847 [salt.state       ][INFO    ][13753] Running state [mysql_grants_grafana_grafana_%] at time 23:20:38.847822
2018-05-09 23:20:38,848 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_grafana_grafana_%
2018-05-09 23:20:38,863 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'grafana.*' for user 'grafana' has been added
2018-05-09 23:20:38,863 [salt.state       ][INFO    ][13753] {'mysql_grants_grafana_grafana_%': 'Present'}
2018-05-09 23:20:38,863 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_grafana_grafana_%] at time 23:20:38.863705 duration_in_ms=15.882
2018-05-09 23:20:38,863 [salt.state       ][INFO    ][13753] Running state [grafana] at time 23:20:38.863949
2018-05-09 23:20:38,864 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for grafana
2018-05-09 23:20:38,885 [salt.loaded.int.module.mysql][INFO    ][13753] User 'grafana'@'172.16.10.36' has been created
2018-05-09 23:20:38,885 [salt.state       ][INFO    ][13753] {'grafana': 'Present'}
2018-05-09 23:20:38,886 [salt.state       ][INFO    ][13753] Completed state [grafana] at time 23:20:38.885946 duration_in_ms=21.996
2018-05-09 23:20:38,888 [salt.state       ][INFO    ][13753] Running state [mysql_grants_grafana_grafana_172.16.10.36] at time 23:20:38.888731
2018-05-09 23:20:38,889 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_grafana_grafana_172.16.10.36
2018-05-09 23:20:38,907 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'grafana.*' for user 'grafana' has been added
2018-05-09 23:20:38,908 [salt.state       ][INFO    ][13753] {'mysql_grants_grafana_grafana_172.16.10.36': 'Present'}
2018-05-09 23:20:38,908 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_grafana_grafana_172.16.10.36] at time 23:20:38.908772 duration_in_ms=20.042
2018-05-09 23:20:38,909 [salt.state       ][INFO    ][13753] Running state [heat] at time 23:20:38.909018
2018-05-09 23:20:38,909 [salt.state       ][INFO    ][13753] Executing state mysql_database.present for heat
2018-05-09 23:20:38,913 [salt.loaded.int.module.mysql][INFO    ][13753] DB 'heat' created
2018-05-09 23:20:38,914 [salt.state       ][INFO    ][13753] {'heat': 'Present'}
2018-05-09 23:20:38,915 [salt.state       ][INFO    ][13753] Completed state [heat] at time 23:20:38.915056 duration_in_ms=6.038
2018-05-09 23:20:38,915 [salt.state       ][INFO    ][13753] Running state [heat] at time 23:20:38.915321
2018-05-09 23:20:38,915 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for heat
2018-05-09 23:20:38,932 [salt.loaded.int.module.mysql][INFO    ][13753] User 'heat'@'%' has been created
2018-05-09 23:20:38,933 [salt.state       ][INFO    ][13753] {'heat': 'Present'}
2018-05-09 23:20:38,933 [salt.state       ][INFO    ][13753] Completed state [heat] at time 23:20:38.933422 duration_in_ms=18.102
2018-05-09 23:20:38,934 [salt.state       ][INFO    ][13753] Running state [mysql_grants_heat_heat_%] at time 23:20:38.934935
2018-05-09 23:20:38,935 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_heat_heat_%
2018-05-09 23:20:38,957 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'heat.*' for user 'heat' has been added
2018-05-09 23:20:38,957 [salt.state       ][INFO    ][13753] {'mysql_grants_heat_heat_%': 'Present'}
2018-05-09 23:20:38,958 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_heat_heat_%] at time 23:20:38.957991 duration_in_ms=23.055
2018-05-09 23:20:38,958 [salt.state       ][INFO    ][13753] Running state [heat] at time 23:20:38.958235
2018-05-09 23:20:38,958 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for heat
2018-05-09 23:20:38,975 [salt.loaded.int.module.mysql][INFO    ][13753] User 'heat'@'172.16.10.36' has been created
2018-05-09 23:20:38,975 [salt.state       ][INFO    ][13753] {'heat': 'Present'}
2018-05-09 23:20:38,975 [salt.state       ][INFO    ][13753] Completed state [heat] at time 23:20:38.975856 duration_in_ms=17.621
2018-05-09 23:20:38,978 [salt.state       ][INFO    ][13753] Running state [mysql_grants_heat_heat_172.16.10.36] at time 23:20:38.978055
2018-05-09 23:20:38,978 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_heat_heat_172.16.10.36
2018-05-09 23:20:38,991 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'heat.*' for user 'heat' has been added
2018-05-09 23:20:38,992 [salt.state       ][INFO    ][13753] {'mysql_grants_heat_heat_172.16.10.36': 'Present'}
2018-05-09 23:20:38,992 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_heat_heat_172.16.10.36] at time 23:20:38.992701 duration_in_ms=14.646
2018-05-09 23:20:38,992 [salt.state       ][INFO    ][13753] Running state [nova_api] at time 23:20:38.992930
2018-05-09 23:20:38,993 [salt.state       ][INFO    ][13753] Executing state mysql_database.present for nova_api
2018-05-09 23:20:38,997 [salt.loaded.int.module.mysql][INFO    ][13753] DB 'nova_api' created
2018-05-09 23:20:38,997 [salt.state       ][INFO    ][13753] {'nova_api': 'Present'}
2018-05-09 23:20:38,997 [salt.state       ][INFO    ][13753] Completed state [nova_api] at time 23:20:38.997429 duration_in_ms=4.499
2018-05-09 23:20:38,997 [salt.state       ][INFO    ][13753] Running state [nova] at time 23:20:38.997654
2018-05-09 23:20:38,997 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for nova
2018-05-09 23:20:39,002 [salt.state       ][INFO    ][13753] User nova@% is already present with the desired password
2018-05-09 23:20:39,002 [salt.state       ][INFO    ][13753] Completed state [nova] at time 23:20:39.002522 duration_in_ms=4.868
2018-05-09 23:20:39,003 [salt.state       ][INFO    ][13753] Running state [mysql_grants_nova_nova_api_%] at time 23:20:39.003906
2018-05-09 23:20:39,004 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_nova_nova_api_%
2018-05-09 23:20:39,016 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'nova_api.*' for user 'nova' has been added
2018-05-09 23:20:39,016 [salt.state       ][INFO    ][13753] {'mysql_grants_nova_nova_api_%': 'Present'}
2018-05-09 23:20:39,016 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_nova_nova_api_%] at time 23:20:39.016864 duration_in_ms=12.958
2018-05-09 23:20:39,017 [salt.state       ][INFO    ][13753] Running state [nova] at time 23:20:39.017091
2018-05-09 23:20:39,017 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for nova
2018-05-09 23:20:39,021 [salt.state       ][INFO    ][13753] User nova@172.16.10.36 is already present with the desired password
2018-05-09 23:20:39,021 [salt.state       ][INFO    ][13753] Completed state [nova] at time 23:20:39.021790 duration_in_ms=4.699
2018-05-09 23:20:39,023 [salt.state       ][INFO    ][13753] Running state [mysql_grants_nova_nova_api_172.16.10.36] at time 23:20:39.023087
2018-05-09 23:20:39,023 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_nova_nova_api_172.16.10.36
2018-05-09 23:20:39,036 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'nova_api.*' for user 'nova' has been added
2018-05-09 23:20:39,036 [salt.state       ][INFO    ][13753] {'mysql_grants_nova_nova_api_172.16.10.36': 'Present'}
2018-05-09 23:20:39,036 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_nova_nova_api_172.16.10.36] at time 23:20:39.036853 duration_in_ms=13.766
2018-05-09 23:20:39,037 [salt.state       ][INFO    ][13753] Running state [keystone] at time 23:20:39.037079
2018-05-09 23:20:39,037 [salt.state       ][INFO    ][13753] Executing state mysql_database.present for keystone
2018-05-09 23:20:39,042 [salt.loaded.int.module.mysql][INFO    ][13753] DB 'keystone' created
2018-05-09 23:20:39,042 [salt.state       ][INFO    ][13753] {'keystone': 'Present'}
2018-05-09 23:20:39,042 [salt.state       ][INFO    ][13753] Completed state [keystone] at time 23:20:39.042673 duration_in_ms=5.594
2018-05-09 23:20:39,042 [salt.state       ][INFO    ][13753] Running state [keystone] at time 23:20:39.042890
2018-05-09 23:20:39,043 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for keystone
2018-05-09 23:20:39,059 [salt.loaded.int.module.mysql][INFO    ][13753] User 'keystone'@'%' has been created
2018-05-09 23:20:39,060 [salt.state       ][INFO    ][13753] {'keystone': 'Present'}
2018-05-09 23:20:39,060 [salt.state       ][INFO    ][13753] Completed state [keystone] at time 23:20:39.060825 duration_in_ms=17.934
2018-05-09 23:20:39,063 [salt.state       ][INFO    ][13753] Running state [mysql_grants_keystone_keystone_%] at time 23:20:39.062964
2018-05-09 23:20:39,063 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_keystone_keystone_%
2018-05-09 23:20:39,078 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'keystone.*' for user 'keystone' has been added
2018-05-09 23:20:39,078 [salt.state       ][INFO    ][13753] {'mysql_grants_keystone_keystone_%': 'Present'}
2018-05-09 23:20:39,079 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_keystone_keystone_%] at time 23:20:39.079080 duration_in_ms=16.116
2018-05-09 23:20:39,079 [salt.state       ][INFO    ][13753] Running state [keystone] at time 23:20:39.079343
2018-05-09 23:20:39,079 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for keystone
2018-05-09 23:20:39,094 [salt.loaded.int.module.mysql][INFO    ][13753] User 'keystone'@'172.16.10.36' has been created
2018-05-09 23:20:39,095 [salt.state       ][INFO    ][13753] {'keystone': 'Present'}
2018-05-09 23:20:39,095 [salt.state       ][INFO    ][13753] Completed state [keystone] at time 23:20:39.095256 duration_in_ms=15.913
2018-05-09 23:20:39,096 [salt.state       ][INFO    ][13753] Running state [mysql_grants_keystone_keystone_172.16.10.36] at time 23:20:39.096632
2018-05-09 23:20:39,096 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_keystone_keystone_172.16.10.36
2018-05-09 23:20:39,108 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'keystone.*' for user 'keystone' has been added
2018-05-09 23:20:39,109 [salt.state       ][INFO    ][13753] {'mysql_grants_keystone_keystone_172.16.10.36': 'Present'}
2018-05-09 23:20:39,109 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_keystone_keystone_172.16.10.36] at time 23:20:39.109252 duration_in_ms=12.621
2018-05-09 23:20:39,109 [salt.state       ][INFO    ][13753] Running state [nova_cell0] at time 23:20:39.109475
2018-05-09 23:20:39,109 [salt.state       ][INFO    ][13753] Executing state mysql_database.present for nova_cell0
2018-05-09 23:20:39,114 [salt.loaded.int.module.mysql][INFO    ][13753] DB 'nova_cell0' created
2018-05-09 23:20:39,114 [salt.state       ][INFO    ][13753] {'nova_cell0': 'Present'}
2018-05-09 23:20:39,114 [salt.state       ][INFO    ][13753] Completed state [nova_cell0] at time 23:20:39.114622 duration_in_ms=5.147
2018-05-09 23:20:39,114 [salt.state       ][INFO    ][13753] Running state [nova] at time 23:20:39.114845
2018-05-09 23:20:39,115 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for nova
2018-05-09 23:20:39,119 [salt.state       ][INFO    ][13753] User nova@% is already present with the desired password
2018-05-09 23:20:39,119 [salt.state       ][INFO    ][13753] Completed state [nova] at time 23:20:39.119326 duration_in_ms=4.481
2018-05-09 23:20:39,120 [salt.state       ][INFO    ][13753] Running state [mysql_grants_nova_nova_cell0_%] at time 23:20:39.120732
2018-05-09 23:20:39,120 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_nova_nova_cell0_%
2018-05-09 23:20:39,136 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'nova_cell0.*' for user 'nova' has been added
2018-05-09 23:20:39,137 [salt.state       ][INFO    ][13753] {'mysql_grants_nova_nova_cell0_%': 'Present'}
2018-05-09 23:20:39,137 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_nova_nova_cell0_%] at time 23:20:39.137224 duration_in_ms=16.491
2018-05-09 23:20:39,137 [salt.state       ][INFO    ][13753] Running state [nova] at time 23:20:39.137518
2018-05-09 23:20:39,137 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for nova
2018-05-09 23:20:39,142 [salt.state       ][INFO    ][13753] User nova@172.16.10.36 is already present with the desired password
2018-05-09 23:20:39,142 [salt.state       ][INFO    ][13753] Completed state [nova] at time 23:20:39.142754 duration_in_ms=5.236
2018-05-09 23:20:39,145 [salt.state       ][INFO    ][13753] Running state [mysql_grants_nova_nova_cell0_172.16.10.36] at time 23:20:39.145281
2018-05-09 23:20:39,145 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_nova_nova_cell0_172.16.10.36
2018-05-09 23:20:39,158 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'nova_cell0.*' for user 'nova' has been added
2018-05-09 23:20:39,158 [salt.state       ][INFO    ][13753] {'mysql_grants_nova_nova_cell0_172.16.10.36': 'Present'}
2018-05-09 23:20:39,158 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_nova_nova_cell0_172.16.10.36] at time 23:20:39.158549 duration_in_ms=13.268
2018-05-09 23:20:39,158 [salt.state       ][INFO    ][13753] Running state [cinder] at time 23:20:39.158775
2018-05-09 23:20:39,159 [salt.state       ][INFO    ][13753] Executing state mysql_database.present for cinder
2018-05-09 23:20:39,163 [salt.loaded.int.module.mysql][INFO    ][13753] DB 'cinder' created
2018-05-09 23:20:39,163 [salt.state       ][INFO    ][13753] {'cinder': 'Present'}
2018-05-09 23:20:39,163 [salt.state       ][INFO    ][13753] Completed state [cinder] at time 23:20:39.163505 duration_in_ms=4.73
2018-05-09 23:20:39,163 [salt.state       ][INFO    ][13753] Running state [cinder] at time 23:20:39.163727
2018-05-09 23:20:39,163 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for cinder
2018-05-09 23:20:39,178 [salt.loaded.int.module.mysql][INFO    ][13753] User 'cinder'@'%' has been created
2018-05-09 23:20:39,178 [salt.state       ][INFO    ][13753] {'cinder': 'Present'}
2018-05-09 23:20:39,178 [salt.state       ][INFO    ][13753] Completed state [cinder] at time 23:20:39.178467 duration_in_ms=14.74
2018-05-09 23:20:39,180 [salt.state       ][INFO    ][13753] Running state [mysql_grants_cinder_cinder_%] at time 23:20:39.180274
2018-05-09 23:20:39,180 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_cinder_cinder_%
2018-05-09 23:20:39,192 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'cinder.*' for user 'cinder' has been added
2018-05-09 23:20:39,193 [salt.state       ][INFO    ][13753] {'mysql_grants_cinder_cinder_%': 'Present'}
2018-05-09 23:20:39,193 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_cinder_cinder_%] at time 23:20:39.193556 duration_in_ms=13.282
2018-05-09 23:20:39,193 [salt.state       ][INFO    ][13753] Running state [cinder] at time 23:20:39.193778
2018-05-09 23:20:39,194 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for cinder
2018-05-09 23:20:39,207 [salt.loaded.int.module.mysql][INFO    ][13753] User 'cinder'@'172.16.10.36' has been created
2018-05-09 23:20:39,208 [salt.state       ][INFO    ][13753] {'cinder': 'Present'}
2018-05-09 23:20:39,208 [salt.state       ][INFO    ][13753] Completed state [cinder] at time 23:20:39.208215 duration_in_ms=14.437
2018-05-09 23:20:39,210 [salt.state       ][INFO    ][13753] Running state [mysql_grants_cinder_cinder_172.16.10.36] at time 23:20:39.210201
2018-05-09 23:20:39,210 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_cinder_cinder_172.16.10.36
2018-05-09 23:20:39,223 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'cinder.*' for user 'cinder' has been added
2018-05-09 23:20:39,223 [salt.state       ][INFO    ][13753] {'mysql_grants_cinder_cinder_172.16.10.36': 'Present'}
2018-05-09 23:20:39,223 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_cinder_cinder_172.16.10.36] at time 23:20:39.223770 duration_in_ms=13.569
2018-05-09 23:20:39,224 [salt.state       ][INFO    ][13753] Running state [glance] at time 23:20:39.223991
2018-05-09 23:20:39,224 [salt.state       ][INFO    ][13753] Executing state mysql_database.present for glance
2018-05-09 23:20:39,227 [salt.loaded.int.module.mysql][INFO    ][13753] DB 'glance' created
2018-05-09 23:20:39,228 [salt.state       ][INFO    ][13753] {'glance': 'Present'}
2018-05-09 23:20:39,228 [salt.state       ][INFO    ][13753] Completed state [glance] at time 23:20:39.228378 duration_in_ms=4.386
2018-05-09 23:20:39,228 [salt.state       ][INFO    ][13753] Running state [glance] at time 23:20:39.228604
2018-05-09 23:20:39,228 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for glance
2018-05-09 23:20:39,243 [salt.loaded.int.module.mysql][INFO    ][13753] User 'glance'@'%' has been created
2018-05-09 23:20:39,243 [salt.state       ][INFO    ][13753] {'glance': 'Present'}
2018-05-09 23:20:39,243 [salt.state       ][INFO    ][13753] Completed state [glance] at time 23:20:39.243715 duration_in_ms=15.111
2018-05-09 23:20:39,245 [salt.state       ][INFO    ][13753] Running state [mysql_grants_glance_glance_%] at time 23:20:39.245260
2018-05-09 23:20:39,245 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_glance_glance_%
2018-05-09 23:20:39,261 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'glance.*' for user 'glance' has been added
2018-05-09 23:20:39,262 [salt.state       ][INFO    ][13753] {'mysql_grants_glance_glance_%': 'Present'}
2018-05-09 23:20:39,262 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_glance_glance_%] at time 23:20:39.262444 duration_in_ms=17.184
2018-05-09 23:20:39,262 [salt.state       ][INFO    ][13753] Running state [glance] at time 23:20:39.262812
2018-05-09 23:20:39,263 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for glance
2018-05-09 23:20:39,277 [salt.loaded.int.module.mysql][INFO    ][13753] User 'glance'@'172.16.10.36' has been created
2018-05-09 23:20:39,278 [salt.state       ][INFO    ][13753] {'glance': 'Present'}
2018-05-09 23:20:39,278 [salt.state       ][INFO    ][13753] Completed state [glance] at time 23:20:39.278248 duration_in_ms=15.436
2018-05-09 23:20:39,279 [salt.state       ][INFO    ][13753] Running state [mysql_grants_glance_glance_172.16.10.36] at time 23:20:39.279604
2018-05-09 23:20:39,279 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_glance_glance_172.16.10.36
2018-05-09 23:20:39,292 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'glance.*' for user 'glance' has been added
2018-05-09 23:20:39,292 [salt.state       ][INFO    ][13753] {'mysql_grants_glance_glance_172.16.10.36': 'Present'}
2018-05-09 23:20:39,292 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_glance_glance_172.16.10.36] at time 23:20:39.292833 duration_in_ms=13.229
2018-05-09 23:20:39,293 [salt.state       ][INFO    ][13753] Running state [neutron] at time 23:20:39.293060
2018-05-09 23:20:39,293 [salt.state       ][INFO    ][13753] Executing state mysql_database.present for neutron
2018-05-09 23:20:39,299 [salt.loaded.int.module.mysql][INFO    ][13753] DB 'neutron' created
2018-05-09 23:20:39,299 [salt.state       ][INFO    ][13753] {'neutron': 'Present'}
2018-05-09 23:20:39,300 [salt.state       ][INFO    ][13753] Completed state [neutron] at time 23:20:39.299994 duration_in_ms=6.934
2018-05-09 23:20:39,300 [salt.state       ][INFO    ][13753] Running state [neutron] at time 23:20:39.300221
2018-05-09 23:20:39,301 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for neutron
2018-05-09 23:20:39,318 [salt.loaded.int.module.mysql][INFO    ][13753] User 'neutron'@'%' has been created
2018-05-09 23:20:39,319 [salt.state       ][INFO    ][13753] {'neutron': 'Present'}
2018-05-09 23:20:39,319 [salt.state       ][INFO    ][13753] Completed state [neutron] at time 23:20:39.319180 duration_in_ms=18.959
2018-05-09 23:20:39,320 [salt.state       ][INFO    ][13753] Running state [mysql_grants_neutron_neutron_%] at time 23:20:39.320699
2018-05-09 23:20:39,320 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_neutron_neutron_%
2018-05-09 23:20:39,334 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'neutron.*' for user 'neutron' has been added
2018-05-09 23:20:39,334 [salt.state       ][INFO    ][13753] {'mysql_grants_neutron_neutron_%': 'Present'}
2018-05-09 23:20:39,335 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_neutron_neutron_%] at time 23:20:39.335068 duration_in_ms=14.369
2018-05-09 23:20:39,335 [salt.state       ][INFO    ][13753] Running state [neutron] at time 23:20:39.335291
2018-05-09 23:20:39,335 [salt.state       ][INFO    ][13753] Executing state mysql_user.present for neutron
2018-05-09 23:20:39,351 [salt.loaded.int.module.mysql][INFO    ][13753] User 'neutron'@'172.16.10.36' has been created
2018-05-09 23:20:39,351 [salt.state       ][INFO    ][13753] {'neutron': 'Present'}
2018-05-09 23:20:39,351 [salt.state       ][INFO    ][13753] Completed state [neutron] at time 23:20:39.351632 duration_in_ms=16.339
2018-05-09 23:20:39,353 [salt.state       ][INFO    ][13753] Running state [mysql_grants_neutron_neutron_172.16.10.36] at time 23:20:39.353344
2018-05-09 23:20:39,353 [salt.state       ][INFO    ][13753] Executing state mysql_grants.present for mysql_grants_neutron_neutron_172.16.10.36
2018-05-09 23:20:39,366 [salt.loaded.int.module.mysql][INFO    ][13753] Grant 'all' on 'neutron.*' for user 'neutron' has been added
2018-05-09 23:20:39,366 [salt.state       ][INFO    ][13753] {'mysql_grants_neutron_neutron_172.16.10.36': 'Present'}
2018-05-09 23:20:39,366 [salt.state       ][INFO    ][13753] Completed state [mysql_grants_neutron_neutron_172.16.10.36] at time 23:20:39.366878 duration_in_ms=13.534
2018-05-09 23:20:39,371 [salt.minion      ][INFO    ][13753] Returning information for job: 20180509232005010756
2018-05-09 23:20:40,127 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232040105853
2018-05-09 23:20:40,148 [salt.minion      ][INFO    ][16082] Starting a new job with PID 16082
2018-05-09 23:20:42,537 [salt.state       ][INFO    ][16082] Loading fresh modules for state activity
2018-05-09 23:20:42,592 [salt.fileclient  ][INFO    ][16082] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-05-09 23:20:42,619 [salt.fileclient  ][INFO    ][16082] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-05-09 23:20:42,651 [salt.fileclient  ][INFO    ][16082] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-05-09 23:20:43,468 [salt.state       ][INFO    ][16082] Running state [memcached] at time 23:20:43.468667
2018-05-09 23:20:43,469 [salt.state       ][INFO    ][16082] Executing state pkg.installed for memcached
2018-05-09 23:20:43,470 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:20:43,867 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-05-09 23:20:43,961 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:20:46,092 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:20:46,129 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-05-09 23:20:49,630 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:20:49,685 [salt.state       ][INFO    ][16082] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-05-09 23:20:49,706 [salt.state       ][INFO    ][16082] Loading fresh modules for state activity
2018-05-09 23:20:49,737 [salt.state       ][INFO    ][16082] Completed state [memcached] at time 23:20:49.737533 duration_in_ms=6268.865
2018-05-09 23:20:49,749 [salt.state       ][INFO    ][16082] Running state [python-memcache] at time 23:20:49.749625
2018-05-09 23:20:49,750 [salt.state       ][INFO    ][16082] Executing state pkg.installed for python-memcache
2018-05-09 23:20:50,159 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:20:50,187 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-05-09 23:20:50,466 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232050215029
2018-05-09 23:20:50,488 [salt.minion      ][INFO    ][16906] Starting a new job with PID 16906
2018-05-09 23:20:50,505 [salt.minion      ][INFO    ][16906] Returning information for job: 20180509232050215029
2018-05-09 23:20:52,111 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:20:52,164 [salt.state       ][INFO    ][16082] Made the following changes:
'python-memcache' changed from 'absent' to '1.57-1'

2018-05-09 23:20:52,183 [salt.state       ][INFO    ][16082] Loading fresh modules for state activity
2018-05-09 23:20:52,214 [salt.state       ][INFO    ][16082] Completed state [python-memcache] at time 23:20:52.214283 duration_in_ms=2464.658
2018-05-09 23:20:52,218 [salt.state       ][INFO    ][16082] Running state [/etc/memcached.conf] at time 23:20:52.218057
2018-05-09 23:20:52,218 [salt.state       ][INFO    ][16082] Executing state file.managed for /etc/memcached.conf
2018-05-09 23:20:52,251 [salt.fileclient  ][INFO    ][16082] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-05-09 23:20:52,299 [salt.state       ][INFO    ][16082] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-05-09 23:20:52,301 [salt.state       ][INFO    ][16082] Completed state [/etc/memcached.conf] at time 23:20:52.301242 duration_in_ms=83.185
2018-05-09 23:20:52,666 [salt.state       ][INFO    ][16082] Running state [memcached] at time 23:20:52.666177
2018-05-09 23:20:52,666 [salt.state       ][INFO    ][16082] Executing state service.running for memcached
2018-05-09 23:20:52,668 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-05-09 23:20:52,689 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-05-09 23:20:52,703 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-05-09 23:20:52,721 [salt.state       ][INFO    ][16082] The service memcached is already running
2018-05-09 23:20:52,721 [salt.state       ][INFO    ][16082] Completed state [memcached] at time 23:20:52.721897 duration_in_ms=55.721
2018-05-09 23:20:52,722 [salt.state       ][INFO    ][16082] Running state [memcached] at time 23:20:52.722186
2018-05-09 23:20:52,722 [salt.state       ][INFO    ][16082] Executing state service.mod_watch for memcached
2018-05-09 23:20:52,723 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-05-09 23:20:52,739 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-05-09 23:20:52,755 [salt.loaded.int.module.cmdmod][INFO    ][16082] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-05-09 23:20:52,777 [salt.state       ][INFO    ][16082] {'memcached': True}
2018-05-09 23:20:52,779 [salt.state       ][INFO    ][16082] Completed state [memcached] at time 23:20:52.779561 duration_in_ms=57.375
2018-05-09 23:20:52,781 [salt.minion      ][INFO    ][16082] Returning information for job: 20180509232040105853
2018-05-09 23:20:53,449 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232053424497
2018-05-09 23:20:53,467 [salt.minion      ][INFO    ][17054] Starting a new job with PID 17054
2018-05-09 23:20:54,132 [salt.state       ][INFO    ][17054] Loading fresh modules for state activity
2018-05-09 23:20:54,195 [salt.fileclient  ][INFO    ][17054] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-05-09 23:20:54,227 [salt.fileclient  ][INFO    ][17054] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-05-09 23:20:55,079 [salt.state       ][INFO    ][17054] Running state [haproxy] at time 23:20:55.079129
2018-05-09 23:20:55,079 [salt.state       ][INFO    ][17054] Executing state pkg.installed for haproxy
2018-05-09 23:20:55,080 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:20:55,459 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-05-09 23:20:55,549 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:20:57,696 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:20:57,729 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-05-09 23:21:01,480 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:21:01,535 [salt.state       ][INFO    ][17054] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-05-09 23:21:01,555 [salt.state       ][INFO    ][17054] Loading fresh modules for state activity
2018-05-09 23:21:01,585 [salt.state       ][INFO    ][17054] Completed state [haproxy] at time 23:21:01.585522 duration_in_ms=6506.394
2018-05-09 23:21:01,588 [salt.state       ][INFO    ][17054] Running state [/etc/default/haproxy] at time 23:21:01.588950
2018-05-09 23:21:01,589 [salt.state       ][INFO    ][17054] Executing state file.managed for /etc/default/haproxy
2018-05-09 23:21:01,615 [salt.fileclient  ][INFO    ][17054] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-05-09 23:21:01,620 [salt.state       ][INFO    ][17054] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-05-09 23:21:01,624 [salt.state       ][INFO    ][17054] Completed state [/etc/default/haproxy] at time 23:21:01.623953 duration_in_ms=35.003
2018-05-09 23:21:01,625 [salt.state       ][INFO    ][17054] Running state [/etc/haproxy/haproxy.cfg] at time 23:21:01.625262
2018-05-09 23:21:01,625 [salt.state       ][INFO    ][17054] Executing state file.managed for /etc/haproxy/haproxy.cfg
2018-05-09 23:21:01,649 [salt.fileclient  ][INFO    ][17054] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-05-09 23:21:01,857 [salt.state       ][INFO    ][17054] File changed:
--- 
+++ 
@@ -1,35 +1,154 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen keystone_public_api
+  bind 10.16.0.107:5000 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:5000 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen nova_api
+  bind 10.16.0.107:8774 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8774 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen glare
+  bind 10.16.0.107:9494 
+  mode http
+  balance roundrobin
+  option  httplog
+  server ctl01 172.16.10.36:9494 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen nova_placement_api
+  bind 10.16.0.107:8778 
+  
+  mode http
+  balance roundrobin
+  option httpclose
+  option httplog
+  option httpchk
+  http-check expect status 401
+  server ctl01 172.16.10.36:8778 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen keystone_admin_api
+  bind 10.16.0.107:35357 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:35357 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen nova_ec2_api
+  bind 10.16.0.107:8773 
+  mode http
+  balance roundrobin
+  option  httplog
+  server ctl01 172.16.10.36:8773 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen cinder_api
+  bind 10.16.0.107:8776 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8776 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen heat_cloudwatch_api
+  bind 10.16.0.107:8003 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8003 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen glance_registry_api
+  bind 10.16.0.107:9191 
+  mode http
+  balance roundrobin
+  option  httplog
+  server ctl01 172.16.10.36:9191 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen ceilometer_api
+  bind 10.16.0.107:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server ctl01 172.16.10.36:8777 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen heat_cfn_api
+  bind 10.16.0.107:8000 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8000 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen glance_api
+  bind 10.16.0.107:9292 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:9292 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen neutron_api
+  bind 10.16.0.107:9696 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:9696 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen heat_api
+  bind 10.16.0.107:8004 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8004 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen nova_metadata_api
+  bind 10.16.0.107:8775 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8775 check inter 15s fastinter 2s downinter 4s rise 3 fall 3
+
+listen aodh-api
+  bind 10.16.0.107:8042 
+  option  httpchk
+  option  httplog
+  option  httpclose
+  server ctl01 172.16.10.36:8042 check inter 15s fastinter 2s downinter 4s rise 3 fall 3

2018-05-09 23:21:01,858 [salt.state       ][INFO    ][17054] Completed state [/etc/haproxy/haproxy.cfg] at time 23:21:01.858618 duration_in_ms=233.356
2018-05-09 23:21:01,859 [salt.state       ][INFO    ][17054] Running state [/etc/haproxy/ssl] at time 23:21:01.859192
2018-05-09 23:21:01,859 [salt.state       ][INFO    ][17054] Executing state file.directory for /etc/haproxy/ssl
2018-05-09 23:21:01,862 [salt.state       ][INFO    ][17054] {'/etc/haproxy/ssl': 'New Dir'}
2018-05-09 23:21:01,862 [salt.state       ][INFO    ][17054] Completed state [/etc/haproxy/ssl] at time 23:21:01.862593 duration_in_ms=3.402
2018-05-09 23:21:01,864 [salt.state       ][INFO    ][17054] Running state [/etc/haproxy/errors/429.http11] at time 23:21:01.863349
2018-05-09 23:21:01,865 [salt.state       ][INFO    ][17054] Executing state file.managed for /etc/haproxy/errors/429.http11
2018-05-09 23:21:01,887 [salt.fileclient  ][INFO    ][17054] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-05-09 23:21:01,890 [salt.state       ][INFO    ][17054] File changed:
New file
2018-05-09 23:21:01,890 [salt.state       ][INFO    ][17054] Completed state [/etc/haproxy/errors/429.http11] at time 23:21:01.890550 duration_in_ms=27.2
2018-05-09 23:21:01,891 [salt.state       ][INFO    ][17054] Running state [haproxy_status_packages] at time 23:21:01.891813
2018-05-09 23:21:01,892 [salt.state       ][INFO    ][17054] Executing state pkg.installed for haproxy_status_packages
2018-05-09 23:21:02,386 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:21:02,419 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-05-09 23:21:03,571 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232103546684
2018-05-09 23:21:03,590 [salt.minion      ][INFO    ][18118] Starting a new job with PID 18118
2018-05-09 23:21:03,615 [salt.minion      ][INFO    ][18118] Returning information for job: 20180509232103546684
2018-05-09 23:21:04,621 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:21:04,677 [salt.state       ][INFO    ][17054] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-05-09 23:21:04,697 [salt.state       ][INFO    ][17054] Loading fresh modules for state activity
2018-05-09 23:21:04,730 [salt.state       ][INFO    ][17054] Completed state [haproxy_status_packages] at time 23:21:04.730903 duration_in_ms=2839.09
2018-05-09 23:21:04,733 [salt.state       ][INFO    ][17054] Running state [/usr/bin/haproxy-status.sh] at time 23:21:04.733821
2018-05-09 23:21:04,734 [salt.state       ][INFO    ][17054] Executing state file.managed for /usr/bin/haproxy-status.sh
2018-05-09 23:21:04,762 [salt.fileclient  ][INFO    ][17054] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-05-09 23:21:04,803 [salt.state       ][INFO    ][17054] File changed:
New file
2018-05-09 23:21:04,804 [salt.state       ][INFO    ][17054] Completed state [/usr/bin/haproxy-status.sh] at time 23:21:04.804022 duration_in_ms=70.201
2018-05-09 23:21:04,807 [salt.state       ][INFO    ][17054] Running state [net.ipv4.ip_nonlocal_bind] at time 23:21:04.807343
2018-05-09 23:21:04,807 [salt.state       ][INFO    ][17054] Executing state sysctl.present for net.ipv4.ip_nonlocal_bind
2018-05-09 23:21:04,810 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command 'sysctl -a' in directory '/root'
2018-05-09 23:21:04,867 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-05-09 23:21:04,880 [salt.state       ][INFO    ][17054] {'net.ipv4.ip_nonlocal_bind': 1}
2018-05-09 23:21:04,880 [salt.state       ][INFO    ][17054] Completed state [net.ipv4.ip_nonlocal_bind] at time 23:21:04.880400 duration_in_ms=73.057
2018-05-09 23:21:05,246 [salt.state       ][INFO    ][17054] Running state [haproxy] at time 23:21:05.246809
2018-05-09 23:21:05,247 [salt.state       ][INFO    ][17054] Executing state service.running for haproxy
2018-05-09 23:21:05,248 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-05-09 23:21:05,263 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-05-09 23:21:05,284 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-05-09 23:21:05,299 [salt.state       ][INFO    ][17054] The service haproxy is already running
2018-05-09 23:21:05,301 [salt.state       ][INFO    ][17054] Completed state [haproxy] at time 23:21:05.301125 duration_in_ms=54.317
2018-05-09 23:21:05,302 [salt.state       ][INFO    ][17054] Running state [haproxy] at time 23:21:05.302057
2018-05-09 23:21:05,303 [salt.state       ][INFO    ][17054] Executing state service.mod_watch for haproxy
2018-05-09 23:21:05,304 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-05-09 23:21:05,324 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-05-09 23:21:05,340 [salt.loaded.int.module.cmdmod][INFO    ][17054] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-05-09 23:21:05,370 [salt.state       ][INFO    ][17054] {'haproxy': True}
2018-05-09 23:21:05,371 [salt.state       ][INFO    ][17054] Completed state [haproxy] at time 23:21:05.371024 duration_in_ms=68.968
2018-05-09 23:21:05,372 [salt.minion      ][INFO    ][17054] Returning information for job: 20180509232053424497
2018-05-09 23:21:06,159 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232106133594
2018-05-09 23:21:06,177 [salt.minion      ][INFO    ][18262] Starting a new job with PID 18262
2018-05-09 23:21:08,676 [salt.state       ][INFO    ][18262] Loading fresh modules for state activity
2018-05-09 23:21:08,769 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'keystone/server.sls'
2018-05-09 23:21:09,000 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-05-09 23:21:09,031 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-05-09 23:21:09,066 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-05-09 23:21:09,163 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-05-09 23:21:09,251 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-05-09 23:21:09,344 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-05-09 23:21:09,489 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-05-09 23:21:09,570 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-05-09 23:21:10,413 [salt.state       ][INFO    ][18262] Running state [keystone] at time 23:21:10.413725
2018-05-09 23:21:10,414 [salt.state       ][INFO    ][18262] Executing state group.present for keystone
2018-05-09 23:21:10,415 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['groupadd', '-g 301', '-r', 'keystone'] in directory '/root'
2018-05-09 23:21:10,447 [salt.state       ][INFO    ][18262] {'passwd': 'x', 'gid': 301, 'name': 'keystone', 'members': []}
2018-05-09 23:21:10,448 [salt.state       ][INFO    ][18262] Completed state [keystone] at time 23:21:10.448127 duration_in_ms=34.401
2018-05-09 23:21:10,449 [salt.state       ][INFO    ][18262] Running state [keystone] at time 23:21:10.449664
2018-05-09 23:21:10,450 [salt.state       ][INFO    ][18262] Executing state user.present for keystone
2018-05-09 23:21:10,451 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['useradd', '-s', '/bin/false', '-u', '301', '-g', '301', '-m', '-d', '/var/lib/keystone', '-r', 'keystone'] in directory '/root'
2018-05-09 23:21:10,496 [salt.state       ][INFO    ][18262] {'shell': '/bin/false', 'workphone': '', 'uid': 301, 'passwd': 'x', 'roomnumber': '', 'groups': ['keystone'], 'home': '/var/lib/keystone', 'name': 'keystone', 'gid': 301, 'fullname': '', 'homephone': ''}
2018-05-09 23:21:10,497 [salt.state       ][INFO    ][18262] Completed state [keystone] at time 23:21:10.497105 duration_in_ms=47.441
2018-05-09 23:21:10,498 [salt.state       ][INFO    ][18262] Running state [keystone] at time 23:21:10.498698
2018-05-09 23:21:10,499 [salt.state       ][INFO    ][18262] Executing state pkg.installed for keystone
2018-05-09 23:21:10,500 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:21:10,880 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['apt-cache', '-q', 'policy', 'keystone'] in directory '/root'
2018-05-09 23:21:10,971 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:21:13,094 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:21:13,129 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keystone'] in directory '/root'
2018-05-09 23:21:16,277 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232116252412
2018-05-09 23:21:16,298 [salt.minion      ][INFO    ][18661] Starting a new job with PID 18661
2018-05-09 23:21:16,320 [salt.minion      ][INFO    ][18661] Returning information for job: 20180509232116252412
2018-05-09 23:21:26,299 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232126276630
2018-05-09 23:21:26,314 [salt.minion      ][INFO    ][19111] Starting a new job with PID 19111
2018-05-09 23:21:26,338 [salt.minion      ][INFO    ][19111] Returning information for job: 20180509232126276630
2018-05-09 23:21:36,527 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232136502535
2018-05-09 23:21:36,548 [salt.minion      ][INFO    ][20638] Starting a new job with PID 20638
2018-05-09 23:21:36,570 [salt.minion      ][INFO    ][20638] Returning information for job: 20180509232136502535
2018-05-09 23:21:46,547 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232146521568
2018-05-09 23:21:46,563 [salt.minion      ][INFO    ][21111] Starting a new job with PID 21111
2018-05-09 23:21:46,590 [salt.minion      ][INFO    ][21111] Returning information for job: 20180509232146521568
2018-05-09 23:21:48,569 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:21:48,636 [salt.state       ][INFO    ][18262] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~cloud0'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-kombu' changed from 'absent' to '4.0.2+really4.0.2+dfsg-2ubuntu1~cloud0'
'python-oslo.concurrency' changed from 'absent' to '3.21.0-0ubuntu2~cloud0'
'python-oslo.service' changed from 'absent' to '1.25.0-0ubuntu1~cloud0'
'python-sqlparse' changed from 'absent' to '0.1.18-1'
'python-pycadf' changed from 'absent' to '2.6.0-0ubuntu1~cloud0'
'xmlsec1' changed from 'absent' to '1.2.20-2ubuntu4'
'python-paste' changed from 'absent' to '1.7.5.1-6ubuntu3'
'python2.7-bson' changed from 'absent' to '1'
'python-oslo-db' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.8'
'python-futurist' changed from 'absent' to '0.13.0-2'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'python-scrypt' changed from 'absent' to '0.8.0-0ubuntu2~cloud0'
'python-migrate' changed from 'absent' to '0.11.0-0ubuntu1~cloud0'
'python-cachetools' changed from 'absent' to '1.1.6-1~cloud0'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-pymongo' changed from 'absent' to '3.2-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.8'
'pycadf-common' changed from 'absent' to '2.6.0-0ubuntu1~cloud0'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python2.7-pymongo-ext' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '3.3.0-0ubuntu1~cloud0'
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.8'
'python-setuptools' changed from 'absent' to '36.2.7-2~cloud0'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-webob' changed from 'absent' to '1:1.7.2-0ubuntu1~cloud0'
'python-bcrypt' changed from 'absent' to '3.1.3-1~cloud0'
'libapr1' changed from 'absent' to '1.5.2-3'
'python-gridfs' changed from 'absent' to '3.2-1build1'
'python-keystonemiddleware' changed from 'absent' to '4.17.0-0ubuntu1~cloud0'
'python-fixtures' changed from 'absent' to '3.0.0-2~cloud0'
'python2.7-bson-ext' changed from 'absent' to '1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python-keystone' changed from 'absent' to '2:12.0.0-0ubuntu1~cloud0'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.8'
'python2.7-pymongo' changed from 'absent' to '1'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-dnspython' changed from 'absent' to '1.15.0-1~cloud0'
'libxmlsec1-openssl' changed from 'absent' to '1.2.20-2ubuntu4'
'python-alembic' changed from 'absent' to '0.8.10-0ubuntu2~cloud0'
'python-statsd' changed from 'absent' to '3.2.1-2~cloud0'
'python-pysaml2' changed from 'absent' to '3.0.0-3ubuntu1.16.04.3'
'python-oslo.db' changed from 'absent' to '4.25.0-0ubuntu1~cloud0'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'libapache2-mod-wsgi' changed from 'absent' to '4.3.0-1.1build1'
'python-eventlet' changed from 'absent' to '0.18.4-1ubuntu1'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python-passlib' changed from 'absent' to '1.7.1-1~cloud0'
'python-oslo.log' changed from 'absent' to '3.30.0-0ubuntu1~cloud0'
'python-extras' changed from 'absent' to '0.0.3-3'
'python-pyinotify' changed from 'absent' to '0.9.6-0fakesync1'
'python-bson-ext' changed from 'absent' to '3.2-1build1'
'python-amqp' changed from 'absent' to '2.1.4-1~cloud0'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python-defusedxml' changed from 'absent' to '0.4.1-2ubuntu0.16.04.1'
'python2.7-testtools' changed from 'absent' to '1'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-osprofiler' changed from 'absent' to '1.11.0-0ubuntu1~cloud0'
'httpd-wsgi' changed from 'absent' to '1'
'python-oslo.messaging' changed from 'absent' to '5.30.0-0ubuntu2~cloud0'
'keystone' changed from 'absent' to '2:12.0.0-0ubuntu1~cloud0'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-oslo.middleware' changed from 'absent' to '3.30.0-0ubuntu1.1~cloud0'
'python-dogpile.cache' changed from 'absent' to '0.6.2-5~cloud0'
'libxmlsec1' changed from 'absent' to '1.2.20-2ubuntu4'
'python-oslo.policy' changed from 'absent' to '1.25.1-0ubuntu1~cloud0'
'python-pika' changed from 'absent' to '0.10.0-1'
'python2.7-gridfs' changed from 'absent' to '1'
'python-greenlet' changed from 'absent' to '0.4.9-2fakesync1'
'python-sqlalchemy-ext' changed from 'absent' to '1.1.9+ds1-0ubuntu3~cloud0'
'python-oslo.context' changed from 'absent' to '1:2.17.0-0ubuntu1~cloud0'
'httpd' changed from 'absent' to '1'
'python-pymongo-ext' changed from 'absent' to '3.2-1build1'
'apache2-api-20120211' changed from 'absent' to '1'
'python-ceilometerclient' changed from 'absent' to '2.9.0-0ubuntu1~cloud0'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'python-oslo.cache' changed from 'absent' to '1.25.0-0ubuntu1~cloud0'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~cloud0'
'python2.7-pyinotify' changed from 'absent' to '1'
'python2.7-keystone' changed from 'absent' to '1'
'python-sqlalchemy' changed from 'absent' to '1.1.9+ds1-0ubuntu3~cloud0'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-bson' changed from 'absent' to '3.2-1build1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'
'python-distribute' changed from 'absent' to '1'
'python-zope' changed from 'absent' to '1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'python-oslo-log' changed from 'absent' to '1'
'httpd-cgi' changed from 'absent' to '1'
'python-oslo-context' changed from 'absent' to '1'
'python-testtools' changed from 'absent' to '1.8.1-0ubuntu1'
'ssl-cert' changed from 'absent' to '1.0.37'
'alembic' changed from 'absent' to '0.8.10-0ubuntu2~cloud0'

2018-05-09 23:21:48,669 [salt.state       ][INFO    ][18262] Loading fresh modules for state activity
2018-05-09 23:21:48,700 [salt.state       ][INFO    ][18262] Completed state [keystone] at time 23:21:48.700196 duration_in_ms=38201.499
2018-05-09 23:21:48,712 [salt.state       ][INFO    ][18262] Running state [python-keystone] at time 23:21:48.712153
2018-05-09 23:21:48,712 [salt.state       ][INFO    ][18262] Executing state pkg.installed for python-keystone
2018-05-09 23:21:49,158 [salt.state       ][INFO    ][18262] All specified packages are already installed
2018-05-09 23:21:49,159 [salt.state       ][INFO    ][18262] Completed state [python-keystone] at time 23:21:49.159109 duration_in_ms=446.956
2018-05-09 23:21:49,159 [salt.state       ][INFO    ][18262] Running state [python-keystoneclient] at time 23:21:49.159901
2018-05-09 23:21:49,160 [salt.state       ][INFO    ][18262] Executing state pkg.installed for python-keystoneclient
2018-05-09 23:21:49,167 [salt.state       ][INFO    ][18262] All specified packages are already installed
2018-05-09 23:21:49,167 [salt.state       ][INFO    ][18262] Completed state [python-keystoneclient] at time 23:21:49.167886 duration_in_ms=7.985
2018-05-09 23:21:49,168 [salt.state       ][INFO    ][18262] Running state [python-psycopg2] at time 23:21:49.168531
2018-05-09 23:21:49,168 [salt.state       ][INFO    ][18262] Executing state pkg.installed for python-psycopg2
2018-05-09 23:21:49,189 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:21:49,222 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-psycopg2'] in directory '/root'
2018-05-09 23:21:51,825 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:21:51,879 [salt.state       ][INFO    ][18262] Made the following changes:
'python-psycopg2' changed from 'absent' to '2.6.1-1build2'
'libpq5' changed from 'absent' to '9.5.12-0ubuntu0.16.04'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'

2018-05-09 23:21:51,900 [salt.state       ][INFO    ][18262] Loading fresh modules for state activity
2018-05-09 23:21:51,930 [salt.state       ][INFO    ][18262] Completed state [python-psycopg2] at time 23:21:51.930390 duration_in_ms=2761.858
2018-05-09 23:21:51,943 [salt.state       ][INFO    ][18262] Running state [python-mysqldb] at time 23:21:51.943137
2018-05-09 23:21:51,943 [salt.state       ][INFO    ][18262] Executing state pkg.installed for python-mysqldb
2018-05-09 23:21:52,352 [salt.state       ][INFO    ][18262] All specified packages are already installed
2018-05-09 23:21:52,353 [salt.state       ][INFO    ][18262] Completed state [python-mysqldb] at time 23:21:52.353112 duration_in_ms=409.975
2018-05-09 23:21:52,354 [salt.state       ][INFO    ][18262] Running state [mysql-client] at time 23:21:52.354160
2018-05-09 23:21:52,354 [salt.state       ][INFO    ][18262] Executing state pkg.installed for mysql-client
2018-05-09 23:21:52,374 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:21:52,407 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'mysql-client'] in directory '/root'
2018-05-09 23:21:54,191 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:21:54,247 [salt.state       ][INFO    ][18262] Made the following changes:
'mysql-client' changed from 'absent' to '5.7.22-0ubuntu0.16.04.1'

2018-05-09 23:21:54,267 [salt.state       ][INFO    ][18262] Loading fresh modules for state activity
2018-05-09 23:21:54,300 [salt.state       ][INFO    ][18262] Completed state [mysql-client] at time 23:21:54.300245 duration_in_ms=1946.085
2018-05-09 23:21:54,312 [salt.state       ][INFO    ][18262] Running state [python-six] at time 23:21:54.312259
2018-05-09 23:21:54,312 [salt.state       ][INFO    ][18262] Executing state pkg.installed for python-six
2018-05-09 23:21:54,781 [salt.state       ][INFO    ][18262] All specified packages are already installed
2018-05-09 23:21:54,782 [salt.state       ][INFO    ][18262] Completed state [python-six] at time 23:21:54.782622 duration_in_ms=470.362
2018-05-09 23:21:54,783 [salt.state       ][INFO    ][18262] Running state [python-memcache] at time 23:21:54.783647
2018-05-09 23:21:54,784 [salt.state       ][INFO    ][18262] Executing state pkg.installed for python-memcache
2018-05-09 23:21:54,791 [salt.state       ][INFO    ][18262] All specified packages are already installed
2018-05-09 23:21:54,791 [salt.state       ][INFO    ][18262] Completed state [python-memcache] at time 23:21:54.791424 duration_in_ms=7.776
2018-05-09 23:21:54,792 [salt.state       ][INFO    ][18262] Running state [python-openstackclient] at time 23:21:54.792310
2018-05-09 23:21:54,792 [salt.state       ][INFO    ][18262] Executing state pkg.installed for python-openstackclient
2018-05-09 23:21:54,800 [salt.state       ][INFO    ][18262] All specified packages are already installed
2018-05-09 23:21:54,800 [salt.state       ][INFO    ][18262] Completed state [python-openstackclient] at time 23:21:54.800604 duration_in_ms=8.293
2018-05-09 23:21:54,801 [salt.state       ][INFO    ][18262] Running state [gettext-base] at time 23:21:54.801464
2018-05-09 23:21:54,801 [salt.state       ][INFO    ][18262] Executing state pkg.installed for gettext-base
2018-05-09 23:21:54,808 [salt.state       ][INFO    ][18262] All specified packages are already installed
2018-05-09 23:21:54,809 [salt.state       ][INFO    ][18262] Completed state [gettext-base] at time 23:21:54.809756 duration_in_ms=8.292
2018-05-09 23:21:54,810 [salt.state       ][INFO    ][18262] Running state [python-pycadf] at time 23:21:54.810543
2018-05-09 23:21:54,810 [salt.state       ][INFO    ][18262] Executing state pkg.installed for python-pycadf
2018-05-09 23:21:54,822 [salt.state       ][INFO    ][18262] All specified packages are already installed
2018-05-09 23:21:54,822 [salt.state       ][INFO    ][18262] Completed state [python-pycadf] at time 23:21:54.822630 duration_in_ms=12.087
2018-05-09 23:21:54,823 [salt.state       ][INFO    ][18262] Running state [apache2] at time 23:21:54.823123
2018-05-09 23:21:54,823 [salt.state       ][INFO    ][18262] Executing state pkg.installed for apache2
2018-05-09 23:21:54,830 [salt.state       ][INFO    ][18262] All specified packages are already installed
2018-05-09 23:21:54,830 [salt.state       ][INFO    ][18262] Completed state [apache2] at time 23:21:54.830830 duration_in_ms=7.707
2018-05-09 23:21:54,831 [salt.state       ][INFO    ][18262] Running state [a2enmod ssl] at time 23:21:54.831890
2018-05-09 23:21:54,832 [salt.state       ][INFO    ][18262] Executing state cmd.run for a2enmod ssl
2018-05-09 23:21:54,832 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command 'a2enmod ssl' in directory '/root'
2018-05-09 23:21:54,904 [salt.state       ][INFO    ][18262] {'pid': 21679, 'retcode': 0, 'stderr': '', 'stdout': 'Considering dependency setenvif for ssl:\nModule setenvif already enabled\nConsidering dependency mime for ssl:\nModule mime already enabled\nConsidering dependency socache_shmcb for ssl:\nEnabling module socache_shmcb.\nEnabling module ssl.\nSee /usr/share/doc/apache2/README.Debian.gz on how to configure SSL and create self-signed certificates.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-05-09 23:21:54,904 [salt.state       ][INFO    ][18262] Completed state [a2enmod ssl] at time 23:21:54.904870 duration_in_ms=72.979
2018-05-09 23:21:54,906 [salt.state       ][INFO    ][18262] Running state [a2enmod rewrite] at time 23:21:54.906093
2018-05-09 23:21:54,906 [salt.state       ][INFO    ][18262] Executing state cmd.run for a2enmod rewrite
2018-05-09 23:21:54,907 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command 'a2enmod rewrite' in directory '/root'
2018-05-09 23:21:54,975 [salt.state       ][INFO    ][18262] {'pid': 21692, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-05-09 23:21:54,975 [salt.state       ][INFO    ][18262] Completed state [a2enmod rewrite] at time 23:21:54.975611 duration_in_ms=69.518
2018-05-09 23:21:54,977 [salt.state       ][INFO    ][18262] Running state [libapache2-mod-wsgi] at time 23:21:54.976953
2018-05-09 23:21:54,977 [salt.state       ][INFO    ][18262] Executing state pkg.installed for libapache2-mod-wsgi
2018-05-09 23:21:54,989 [salt.state       ][INFO    ][18262] All specified packages are already installed
2018-05-09 23:21:54,989 [salt.state       ][INFO    ][18262] Completed state [libapache2-mod-wsgi] at time 23:21:54.989383 duration_in_ms=12.43
2018-05-09 23:21:54,990 [salt.state       ][INFO    ][18262] Running state [a2enmod wsgi] at time 23:21:54.990058
2018-05-09 23:21:54,990 [salt.state       ][INFO    ][18262] Executing state cmd.run for a2enmod wsgi
2018-05-09 23:21:54,990 [salt.state       ][INFO    ][18262] /etc/apache2/mods-enabled/wsgi.load exists
2018-05-09 23:21:54,991 [salt.state       ][INFO    ][18262] Completed state [a2enmod wsgi] at time 23:21:54.991028 duration_in_ms=0.97
2018-05-09 23:21:54,997 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 23:21:54.997814
2018-05-09 23:21:54,998 [salt.state       ][INFO    ][18262] Executing state file.absent for /etc/apache2/mods-enabled/mpm_prefork.load
2018-05-09 23:21:54,999 [salt.state       ][INFO    ][18262] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2018-05-09 23:21:54,999 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 23:21:54.999294 duration_in_ms=1.48
2018-05-09 23:21:54,999 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 23:21:54.999521
2018-05-09 23:21:54,999 [salt.state       ][INFO    ][18262] Executing state file.absent for /etc/apache2/mods-enabled/mpm_prefork.conf
2018-05-09 23:21:55,000 [salt.state       ][INFO    ][18262] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2018-05-09 23:21:55,000 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 23:21:55.000220 duration_in_ms=0.699
2018-05-09 23:21:55,000 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:21:55.000443
2018-05-09 23:21:55,000 [salt.state       ][INFO    ][18262] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.load
2018-05-09 23:21:55,000 [salt.state       ][INFO    ][18262] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-05-09 23:21:55,001 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:21:55.001117 duration_in_ms=0.674
2018-05-09 23:21:55,001 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:21:55.001327
2018-05-09 23:21:55,001 [salt.state       ][INFO    ][18262] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.conf
2018-05-09 23:21:55,001 [salt.state       ][INFO    ][18262] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-05-09 23:21:55,002 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:21:55.001978 duration_in_ms=0.651
2018-05-09 23:21:55,004 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 23:21:55.004651
2018-05-09 23:21:55,004 [salt.state       ][INFO    ][18262] Executing state file.managed for /etc/apache2/mods-available/mpm_event.conf
2018-05-09 23:21:55,039 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_event.conf'
2018-05-09 23:21:55,100 [salt.state       ][INFO    ][18262] File changed:
--- 
+++ 
@@ -5,14 +5,15 @@
 # ThreadsPerChild: constant number of worker threads in each server process
 # MaxRequestWorkers: maximum number of worker threads
 # MaxConnectionsPerChild: maximum number of requests a server process serves
+
 <IfModule mpm_event_module>
-	StartServers			 2
-	MinSpareThreads		 25
-	MaxSpareThreads		 75
-	ThreadLimit			 64
-	ThreadsPerChild		 25
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareThreads         25
+    MaxSpareThreads         75
+    ThreadLimit             64
+    ThreadsPerChild         25
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-05-09 23:21:55,101 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 23:21:55.101320 duration_in_ms=96.669
2018-05-09 23:21:55,102 [salt.state       ][INFO    ][18262] Running state [a2enmod mpm_event] at time 23:21:55.102461
2018-05-09 23:21:55,102 [salt.state       ][INFO    ][18262] Executing state cmd.run for a2enmod mpm_event
2018-05-09 23:21:55,103 [salt.state       ][INFO    ][18262] /etc/apache2/mods-enabled/mpm_event.load exists
2018-05-09 23:21:55,103 [salt.state       ][INFO    ][18262] Completed state [a2enmod mpm_event] at time 23:21:55.103197 duration_in_ms=0.736
2018-05-09 23:21:55,103 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/ports.conf] at time 23:21:55.103727
2018-05-09 23:21:55,103 [salt.state       ][INFO    ][18262] Executing state file.managed for /etc/apache2/ports.conf
2018-05-09 23:21:55,129 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-05-09 23:21:55,185 [salt.state       ][INFO    ][18262] File /etc/apache2/ports.conf is in the correct state
2018-05-09 23:21:55,185 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/ports.conf] at time 23:21:55.185230 duration_in_ms=81.503
2018-05-09 23:21:55,185 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/conf-available/security.conf] at time 23:21:55.185775
2018-05-09 23:21:55,186 [salt.state       ][INFO    ][18262] Executing state file.managed for /etc/apache2/conf-available/security.conf
2018-05-09 23:21:55,216 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-05-09 23:21:55,281 [salt.state       ][INFO    ][18262] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-05-09 23:21:55,282 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/conf-available/security.conf] at time 23:21:55.282091 duration_in_ms=96.315
2018-05-09 23:21:55,295 [salt.state       ][INFO    ][18262] Running state [/etc/keystone/policy.json] at time 23:21:55.295548
2018-05-09 23:21:55,295 [salt.state       ][INFO    ][18262] Executing state file.managed for /etc/keystone/policy.json
2018-05-09 23:21:55,296 [salt.loaded.int.states.file][WARNING ][18262] State for file: /etc/keystone/policy.json - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-05-09 23:21:55,296 [salt.state       ][INFO    ][18262] {'new': 'file /etc/keystone/policy.json created', 'group': 'keystone', 'user': 'keystone'}
2018-05-09 23:21:55,297 [salt.state       ][INFO    ][18262] Completed state [/etc/keystone/policy.json] at time 23:21:55.297131 duration_in_ms=1.583
2018-05-09 23:21:55,297 [salt.state       ][INFO    ][18262] Running state [/etc/keystone/keystone-paste.ini] at time 23:21:55.297679
2018-05-09 23:21:55,297 [salt.state       ][INFO    ][18262] Executing state file.managed for /etc/keystone/keystone-paste.ini
2018-05-09 23:21:55,322 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'keystone/files/pike/keystone-paste.ini.Debian'
2018-05-09 23:21:55,327 [salt.state       ][INFO    ][18262] {'group': 'keystone', 'user': 'keystone'}
2018-05-09 23:21:55,328 [salt.state       ][INFO    ][18262] Completed state [/etc/keystone/keystone-paste.ini] at time 23:21:55.328274 duration_in_ms=30.595
2018-05-09 23:21:55,328 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 23:21:55.328555
2018-05-09 23:21:55,328 [salt.state       ][INFO    ][18262] Executing state file.absent for /etc/apache2/sites-enabled/000-default.conf
2018-05-09 23:21:55,329 [salt.state       ][INFO    ][18262] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-05-09 23:21:55,329 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 23:21:55.329414 duration_in_ms=0.859
2018-05-09 23:21:55,330 [salt.state       ][INFO    ][18262] Running state [/etc/keystone/keystone.conf] at time 23:21:55.330075
2018-05-09 23:21:55,330 [salt.state       ][INFO    ][18262] Executing state file.managed for /etc/keystone/keystone.conf
2018-05-09 23:21:55,368 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'keystone/files/pike/keystone.conf.Debian'
2018-05-09 23:21:55,563 [salt.state       ][INFO    ][18262] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-log_dir = /var/log/keystone
 
 #
 # From keystone
@@ -16,6 +16,7 @@
 # `AdminTokenAuthMiddleware` (the `admin_token_auth` filter) from your paste
 # application pipelines (for example, in `keystone-paste.ini`). (string value)
 #admin_token = <None>
+admin_token=opnfv_secret
 
 # The base public endpoint URL for Keystone that is advertised to clients
 # (NOTE: this does NOT affect how Keystone listens for connections). Defaults
@@ -99,6 +100,7 @@
 # in the P release. Use oslo.middleware.http_proxy_to_wsgi configuration
 # instead.
 #secure_proxy_ssl_header = HTTP_X_FORWARDED_PROTO
+secure_proxy_ssl_header = "HTTP_X_FORWARDED_PROTO"
 
 # If set to true, then the server will return information in HTTP responses
 # that may allow an unauthenticated or authenticated user to get more
@@ -118,6 +120,7 @@
 # recommended for auditing use cases. (string value)
 # Allowed values: basic, cadf
 #notification_format = cadf
+notification_format = basic
 
 # You can reduce the number of notifications keystone emits by explicitly
 # opting out. Keystone will not emit notifications that match the patterns
@@ -140,6 +143,14 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -166,6 +177,7 @@
 # is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
+log_dir = /var/log/keystone
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
@@ -179,12 +191,6 @@
 # is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
@@ -213,7 +219,7 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -246,6 +252,7 @@
 #
 
 # Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
 #rpc_conn_pool_size = 30
 
 # The pool size limit for connections expiration policy (integer value)
@@ -256,24 +263,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -286,21 +299,26 @@
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -315,20 +333,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -393,17 +415,16 @@
 # value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
-
 # A URL representing the messaging driver to use and its full configuration.
 # (string value)
-#transport_url = <None>
+#transport_url = rabbit://nova:3qVSI7a1m8AdaDQ7BpB0PJu4@192.168.0.4:5673/
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -411,7 +432,6 @@
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
-
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
 #control_exchange = keystone
@@ -432,7 +452,7 @@
 # A list of role names which are prohibited from being an implied role. (list
 # value)
 #prohibited_implied_role = admin
-
+driver = sql
 
 [auth]
 
@@ -446,6 +466,8 @@
 # are being invoked to validate attributes in the request environment, it can
 # cause conflicts. (list value)
 #methods = external,password,token,oauth1,mapped
+
+methods = password,token
 
 # Entry point for the password auth plugin module in the
 # `keystone.auth.password` namespace. You do not need to set this unless you
@@ -497,14 +519,14 @@
 # expiration time defined for it. (integer value)
 #expiration_time = 600
 
-# Cache backend module. For eventlet-based or environments with hundreds of
-# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
-# recommended. For environments with less than 100 threaded servers, Memcached
-# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
-# environments with a single instance of the server can use the
-# dogpile.cache.memory backend. (string value)
-# Allowed values: oslo_cache.memcache_pool, oslo_cache.dict, dogpile.cache.memcached, dogpile.cache.redis, dogpile.cache.memory, dogpile.cache.null
+# Dogpile.cache backend module. It is recommended that Memcache or Redis
+# (dogpile.cache.redis) be used in production deployments. For eventlet-based
+# or highly threaded servers, Memcache with pooling (oslo_cache.memcache_pool)
+# is recommended. For low thread servers, dogpile.cache.memcached is
+# recommended. Test environments with a single instance of the server can use
+# the dogpile.cache.memory backend. (string value)
 #backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
 
 # Arguments supplied to the backend module. Specify this option once per
 # argument to be passed to the dogpile.cache backend. Example format:
@@ -518,6 +540,7 @@
 
 # Global toggle for caching. (boolean value)
 #enabled = true
+enabled = true
 
 # Extra debugging from the cache backend (cache keys, get/set/delete/etc
 # calls). This is only really useful if you need to see the specific cache-
@@ -528,23 +551,28 @@
 # Memcache servers in the format of "host:port". (dogpile.cache.memcache and
 # oslo_cache.memcache_pool backends only). (list value)
 #memcache_servers = localhost:11211
+memcache_servers =localhost:11211
 
 # Number of seconds memcached server is considered dead before it is tried
 # again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
 # (integer value)
 #memcache_dead_retry = 300
+memcache_dead_retry = 300
 
 # Timeout in seconds for every call to a server. (dogpile.cache.memcache and
 # oslo_cache.memcache_pool backends only). (integer value)
 #memcache_socket_timeout = 3
+memcache_socket_timeout = 1
 
 # Max total number of open connections to every memcached server.
 # (oslo_cache.memcache_pool backend only). (integer value)
 #memcache_pool_maxsize = 10
+memcache_pool_maxsize = 100
 
 # Number of seconds a connection to memcached is held unused in the pool before
 # it is closed. (oslo_cache.memcache_pool backend only). (integer value)
 #memcache_pool_unused_timeout = 60
+memcache_pool_unused_timeout = 60
 
 # Number of seconds that an operation will wait to get a memcache client
 # connection. (integer value)
@@ -560,6 +588,7 @@
 # Absolute path to the file used for the templated catalog backend. This option
 # is only used if the `[catalog] driver` is set to `templated`. (string value)
 #template_file = default_catalog.templates
+template_file = default_catalog.templates
 
 # Entry point for the catalog driver in the `keystone.catalog` namespace.
 # Keystone provides a `sql` option (which supports basic CRUD operations
@@ -567,6 +596,7 @@
 # catalog file on disk), and a `endpoint_filter.sql` option (which supports
 # arbitrary service catalogs per project). (string value)
 #driver = sql
+driver = sql
 
 # Toggle for catalog caching. This has no effect unless global caching is
 # enabled. In a typical deployment, there is no reason to disable this.
@@ -587,6 +617,42 @@
 
 
 [cors]
+
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
+
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
+
+
+[cors.subdomain]
 
 #
 # From oslo.middleware
@@ -638,17 +704,25 @@
 # of keys should be managed separately and require different rotation policies.
 # Do not share this repository with the repository used to manage keys for
 # Fernet tokens. (string value)
-#key_repository = /etc/keystone/credential-keys/
+key_repository = /var/lib/keystone/credential-keys
 
 
 [database]
-connection = sqlite:////var/lib/keystone/keystone.db
 
 #
 # From oslo.db
 #
 
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect
+# the database.
+#sqlite_db = oslo.sqlite
+
 # If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
 #sqlite_synchronous = true
 
 # The back end to use for the database. (string value)
@@ -661,6 +735,7 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
+connection=mysql+pymysql://keystone:opnfv_secret@172.16.10.36/keystone
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
@@ -672,15 +747,12 @@
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
 # Timeout before idle SQL connections are reaped. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #idle_timeout = 3600
+idle_timeout = 3600
 
 # Minimum number of SQL connections to keep open in a pool. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
@@ -692,6 +764,9 @@
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size=10
+max_overflow=30
+max_retries=-1
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
@@ -805,7 +880,7 @@
 #
 
 # DEPRECATED: The IP address of the network interface for the public service to
-# listen on. (unknown value)
+# listen on. (string value)
 # Deprecated group/name - [DEFAULT]/bind_host
 # Deprecated group/name - [DEFAULT]/public_bind_host
 # This option is deprecated for removal since K.
@@ -814,6 +889,7 @@
 # Newton release. These options remain for backwards compatibility because they
 # are used for URL substitutions.
 #public_bind_host = 0.0.0.0
+public_bind_host=172.16.10.36
 
 # DEPRECATED: The port number for the public service to listen on. (port value)
 # Minimum value: 0
@@ -825,9 +901,10 @@
 # Newton release. These options remain for backwards compatibility because they
 # are used for URL substitutions.
 #public_port = 5000
+public_port = 5000
 
 # DEPRECATED: The IP address of the network interface for the admin service to
-# listen on. (unknown value)
+# listen on. (string value)
 # Deprecated group/name - [DEFAULT]/bind_host
 # Deprecated group/name - [DEFAULT]/admin_bind_host
 # This option is deprecated for removal since K.
@@ -836,6 +913,7 @@
 # Newton release. These options remain for backwards compatibility because they
 # are used for URL substitutions.
 #admin_bind_host = 0.0.0.0
+admin_bind_host=172.16.10.36
 
 # DEPRECATED: The port number for the admin service to listen on. (port value)
 # Minimum value: 0
@@ -847,6 +925,7 @@
 # Newton release. These options remain for backwards compatibility because they
 # are used for URL substitutions.
 #admin_port = 35357
+admin_port = 35357
 
 
 [extra_headers]
@@ -857,7 +936,6 @@
 
 # Specifies the distribution of the keystone server. (string value)
 #Distribution = Ubuntu
-
 
 [federation]
 
@@ -876,7 +954,7 @@
 #assertion_prefix =
 
 # Value to be used to obtain the entity ID of the Identity Provider from the
-# environment. For `mod_shib`, this would be `Shib-Identity-Provider`. For
+# environment. For `mod_shib`, this would be `Shib-Identity-Provider`. For For
 # `mod_auth_openidc`, this could be `HTTP_OIDC_ISS`. For `mod_auth_mellon`,
 # this could be `MELLON_IDP`. (string value)
 #remote_id_attribute = <None>
@@ -934,6 +1012,7 @@
 # other nodes will result in tokens that can not be validated by all nodes.
 # (string value)
 #key_repository = /etc/keystone/fernet-keys/
+key_repository = /var/lib/keystone/fernet-keys
 
 # This controls how many keys are held in rotation by `keystone-manage
 # fernet_rotate` before they are discarded. The default value of 3 means that
@@ -943,7 +1022,7 @@
 # the rotation. (integer value)
 # Minimum value: 1
 #max_active_keys = 3
-
+max_active_keys=3
 
 [healthcheck]
 
@@ -1020,6 +1099,7 @@
 # deployment primarily relies on `ldap` AND is not using domain-specific
 # configuration, you should typically leave this set to `sql`. (string value)
 #driver = sql
+driver = sql
 
 # Toggle for identity caching. This has no effect unless global caching is
 # enabled. There is typically no reason to disable this. (boolean value)
@@ -1038,52 +1118,6 @@
 # Maximum number of entities that will be returned in an identity collection.
 # (integer value)
 #list_limit = <None>
-
-# The password hashing algorithm to use for passwords stored within keystone.
-# (string value)
-# Allowed values: bcrypt, scrypt, pbkdf2_sha512
-#password_hash_algorithm = bcrypt
-
-# This option represents a trade off between security and performance. Higher
-# values lead to slower performance, but higher security. Changing this option
-# will only affect newly created passwords as existing password hashes already
-# have a fixed number of rounds applied, so it is safe to tune this option in a
-# running cluster.  The default for bcrypt is 12, must be between 4 and 31,
-# inclusive.  The default for scrypt is 16, must be within `range(1,32)`.  The
-# default for pbkdf_sha512 is 60000, must be within `range(1,1<<32)`  WARNING:
-# If using scrypt, increasing this value increases BOTH time AND memory
-# requirements to hash a password. (integer value)
-#password_hash_rounds = <None>
-
-# Optional block size to pass to scrypt hash function (the `r` parameter).
-# Useful for tuning scrypt to optimal performance for your CPU architecture.
-# This option is only used when the `password_hash_algorithm` option is set to
-# `scrypt`. Defaults to 8. (integer value)
-#scrypt_block_size = <None>
-
-# Optional parallelism to pass to scrypt hash function (the `p` parameter).
-# This option is only used when the `password_hash_algorithm` option is set to
-# `scrypt`. Defaults to 1. (integer value)
-#scrypt_parallelism = <None>
-
-# Number of bytes to use in scrypt and pbkfd2_sha512 hashing salt.  Default for
-# scrypt is 16 bytes. Default for pbkfd2_sha512 is 16 bytes.  Limited to a
-# maximum of 96 bytes due to the size of the column used to store password
-# hashes. (integer value)
-# Minimum value: 0
-# Maximum value: 96
-#salt_bytesize = <None>
-
-# This option tells keystone to continue to hash passwords with the
-# sha512_crypt algorithm for supporting rolling upgrades. sha512_crypt is
-# typically more insecure than bcrypt, pbkdf2, and scrypt. This option should
-# be set to `False` except in the case of performing a rolling upgrade where
-# some Keystone servers may not know how to verify non-sha512_crypt based
-# password hashes.  This option will be removed in the Queens release and is
-# only to support rolling upgrades from Ocata release to Pike release. (boolean
-# value)
-#rolling_upgrade_password_hash_compat = false
-
 
 [identity_mapping]
 
@@ -1123,6 +1157,56 @@
 #backward_compatible_ids = true
 
 
+[kvs]
+
+#
+# From keystone
+#
+
+# DEPRECATED: Extra `dogpile.cache` backend modules to register with the
+# `dogpile.cache` library. It is not necessary to set this value unless you are
+# providing a custom KVS backend beyond what `dogpile.cache` already supports.
+# (list value)
+# This option is deprecated for removal since O.
+# Its value may be silently ignored in the future.
+# Reason: This option has been deprecated in the O release and will be removed
+# in the P release. Use SQL backends instead.
+#backends =
+
+# DEPRECATED: Prefix for building the configuration dictionary for the KVS
+# region. This should not need to be changed unless there is another
+# `dogpile.cache` region with the same configuration name. (string value)
+# This option is deprecated for removal since O.
+# Its value may be silently ignored in the future.
+# Reason: This option has been deprecated in the O release and will be removed
+# in the P release. Use SQL backends instead.
+#config_prefix = keystone.kvs
+
+# DEPRECATED: Set to false to disable using a key-mangling function, which
+# ensures fixed-length keys are used in the KVS store. This is configurable for
+# debugging purposes, and it is therefore highly recommended to always leave
+# this set to true. (boolean value)
+# This option is deprecated for removal since O.
+# Its value may be silently ignored in the future.
+# Reason: This option has been deprecated in the O release and will be removed
+# in the P release. Use SQL backends instead.
+#enable_key_mangler = true
+
+# DEPRECATED: Number of seconds after acquiring a distributed lock that the
+# backend should consider the lock to be expired. This option should be tuned
+# relative to the longest amount of time that it takes to perform a successful
+# operation. If this value is set too low, then a cluster will end up
+# performing work redundantly. If this value is set too high, then a cluster
+# will not be able to efficiently recover and retry after a failed operation. A
+# non-zero value is recommended if the backend supports lock timeouts, as zero
+# prevents locks from expiring altogether. (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since O.
+# Its value may be silently ignored in the future.
+# Reason: This option has been deprecated in the O release and will be removed
+# in the P release. Use SQL backends instead.
+#default_lock_timeout = 5
+
 [ldap]
 
 #
@@ -1454,6 +1538,21 @@
 # From keystone
 #
 
+# DEPRECATED: Comma-separated list of memcached servers in the format of
+# `host:port,host:port` that keystone should use for the `memcache` token
+# persistence provider and other memcache-backed KVS drivers. This
+# configuration value is NOT used for intermediary caching between keystone and
+# other backends, such as SQL and LDAP (for that, see the `[cache]` section).
+# Multiple keystone servers in the same deployment should use the same set of
+# memcached servers to ensure that data (such as UUID tokens) created by one
+# node is available to the others. (list value)
+# This option is deprecated for removal since O.
+# Its value may be silently ignored in the future.
+# Reason: This option has been deprecated in the O release and will be removed
+# in the P release. Use oslo.cache instead.
+#servers = localhost:11211
+servers =localhost:11211
+
 # Number of seconds memcached server is considered dead before it is tried
 # again. This is used by the key value store system. (integer value)
 #dead_retry = 300
@@ -1509,64 +1608,61 @@
 
 # Name for the AMQP container. must be globally unique. Defaults to a generated
 # UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
 #container_name = <None>
 
 # Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
 #idle_timeout = 0
 
 # Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
 #trace = false
 
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
 # CA certificate PEM file used to verify the server's certificate (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
 #ssl_ca_file =
 
 # Self-identifying certificate PEM file for client authentication (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
 #ssl_cert_file =
 
 # Private key PEM file used to sign ssl_cert_file certificate (optional)
 # (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
 #ssl_key_file =
 
 # Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
 #ssl_key_password = <None>
 
 # DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Not applicable - not a SSL server
 #allow_insecure_clients = false
 
 # Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
 #sasl_mechanisms =
 
 # Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
 #sasl_config_dir =
 
 # Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
 #sasl_config_name =
 
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
 #username =
 
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
 #password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
@@ -1621,12 +1717,15 @@
 #addressing_mode = dynamic
 
 # address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
 #server_request_prefix = exclusive
 
 # address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
 #broadcast_prefix = broadcast
 
 # address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
 #group_request_prefix = unicast
 
 # Address prefix for all generated RPC addresses (string value)
@@ -1714,7 +1813,7 @@
 # Max fetch bytes of Kafka consumer (integer value)
 #kafka_max_fetch_bytes = 1048576
 
-# Default timeout(s) for Kafka consumers (floating point value)
+# Default timeout(s) for Kafka consumers (integer value)
 #kafka_consumer_timeout = 1.0
 
 # Pool Size for Kafka Consumers (integer value)
@@ -1748,6 +1847,7 @@
 # messaging, messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
+driver=messagingv2
 
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
@@ -1759,11 +1859,6 @@
 # Deprecated group/name - [DEFAULT]/notification_topics
 #topics = notifications
 
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
 
 [oslo_messaging_rabbit]
 
@@ -1777,31 +1872,30 @@
 #amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
 #amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
 
 # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
 # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
 # distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
 
 # SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
 
 # SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
 
 # SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
 #kombu_reconnect_delay = 1.0
 
 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
@@ -1821,6 +1915,7 @@
 
 # DEPRECATED: The RabbitMQ broker address where a single node is used. (string
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1830,24 +1925,32 @@
 # value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_port = 5672
 
 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_hosts = $rabbit_host:$rabbit_port
 
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
 # DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_userid = guest
 
 # DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1855,9 +1958,11 @@
 
 # The RabbitMQ login method. (string value)
 # Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
 #rabbit_login_method = AMQPLAIN
 
 # DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1868,6 +1973,7 @@
 
 # How long to backoff for between retries when connecting to RabbitMQ. (integer
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
 #rabbit_retry_backoff = 2
 
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
@@ -1876,6 +1982,7 @@
 
 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
 # (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #rabbit_max_retries = 0
@@ -1886,6 +1993,7 @@
 # If you just want to make sure that all queues (except those with auto-
 # generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
 # HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
 #rabbit_ha_queues = false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
@@ -1902,12 +2010,15 @@
 # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
 # value)
 #heartbeat_timeout_threshold = 60
+heartbeat_timeout_threshold = 0
 
 # How often times during the heartbeat_timeout_threshold we check the
 # heartbeat. (integer value)
 #heartbeat_rate = 2
+heartbeat_rate = 2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
 #fake_rabbit = false
 
 # Maximum number of channels to allow (integer value)
@@ -1918,6 +2029,9 @@
 
 # How often to send heartbeats for consumer's connections (integer value)
 #heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
 
 # Arguments passed to ssl.wrap_socket (dict value)
 #ssl_options = <None>
@@ -2023,24 +2137,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -2053,21 +2173,26 @@
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -2082,20 +2207,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -2170,7 +2299,7 @@
 # The maximum body size for each  request, in bytes. (integer value)
 # Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
 # Deprecated group/name - [DEFAULT]/max_request_body_size
-#max_request_body_size = 114688
+max_request_body_size= 114688
 
 # DEPRECATED: The HTTP Header that will be used to determine what the original
 # request protocol scheme was, even if it was hidden by a SSL termination
@@ -2191,9 +2320,11 @@
 #
 
 # The file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
 #policy_file = policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
 #policy_default_rule = default
 
 # Directories where policy configuration files are stored. They can be relative
@@ -2201,6 +2332,7 @@
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
 #policy_dirs = policy.d
 
 
@@ -2227,7 +2359,11 @@
 # Supplied drivers are `rules` (which does not support any CRUD operations for
 # the v3 policy API) and `sql`. Typically, there is no reason to set this
 # option unless you are providing a custom entry point. (string value)
-#driver = sql
+driver = sql
+#
+# Explicit defintion of the driver is depricated
+#
+#driver = keystone.policy.backends.sql.Policy
 
 # Maximum number of entities that will be returned in a policy collection.
 # (integer value)
@@ -2338,15 +2474,10 @@
 # From keystone
 #
 
-# DEPRECATED: Entry point for the resource driver in the `keystone.resource`
-# namespace. Only a `sql` driver is supplied by keystone. Unless you are
-# writing proprietary drivers for keystone, you do not need to set this option.
-# (string value)
-# This option is deprecated for removal since P.
-# Its value may be silently ignored in the future.
-# Reason: Non-SQL resource cannot be used with SQL Identity and has been unable
-# to be used since Ocata. SQL Resource backend is a requirement as of Pike.
-# Setting this option no longer has an effect on how Keystone operates.
+# Entry point for the resource driver in the `keystone.resource` namespace.
+# Only a `sql` driver is supplied by keystone. Unless you are writing
+# proprietary drivers for keystone, you do not need to set this option. (string
+# value)
 #driver = sql
 
 # Toggle for resource caching. This has no effect unless global caching is
@@ -2579,6 +2710,20 @@
 # `[identity] driver`. (integer value)
 # Minimum value: 1
 #password_expires_days = <None>
+
+# DEPRECATED: Comma separated list of user IDs to be ignored when checking if a
+# password is expired. Passwords for users in this list will not expire. This
+# feature will only be enabled if `[security_compliance] password_expires_days`
+# is set. (list value)
+# This option is deprecated for removal since O.
+# Its value may be silently ignored in the future.
+# Reason: Functionality added as a per-user option "ignore_password_expiry" in
+# Ocata. Each user that should ignore password expiry should have the value set
+# to "true" in the user's `options` attribute (e.g.
+# `user['options']['ignore_password_expiry'] = True`) with an "update_user"
+# call. This avoids the need to restart keystone to adjust the users that
+# ignore password expiry. This option will be removed in the Pike release.
+#password_expires_ignore_user_ids =
 
 # This controls the number of previous user password iterations to keep in
 # history, in order to enforce that newly created passwords are unique. Setting
@@ -2644,82 +2789,51 @@
 # From keystone
 #
 
-# DEPRECATED: Absolute path to the public certificate file to use for signing
-# responses to revocation lists requests. Set this together with `[signing]
-# keyfile`. For non-production environments, you may be interested in using
-# `keystone-manage pki_setup` to generate self-signed certificates. (string
-# value)
-# This option is deprecated for removal since P.
-# Its value may be silently ignored in the future.
-# Reason: `keystone-manage pki_setup` was deprecated in Mitaka and removed in
-# Pike. These options remain for backwards compatibility.
+# Absolute path to the public certificate file to use for signing responses to
+# revocation lists requests. Set this together with `[signing] keyfile`. For
+# non-production environments, you may be interested in using `keystone-manage
+# pki_setup` to generate self-signed certificates. (string value)
 #certfile = /etc/keystone/ssl/certs/signing_cert.pem
 
-# DEPRECATED: Absolute path to the private key file to use for signing
-# responses to revocation lists requests. Set this together with `[signing]
-# certfile`. (string value)
-# This option is deprecated for removal since P.
-# Its value may be silently ignored in the future.
-# Reason: `keystone-manage pki_setup` was deprecated in Mitaka and removed in
-# Pike. These options remain for backwards compatibility.
+# Absolute path to the private key file to use for signing responses to
+# revocation lists requests. Set this together with `[signing] certfile`.
+# (string value)
 #keyfile = /etc/keystone/ssl/private/signing_key.pem
 
-# DEPRECATED: Absolute path to the public certificate authority (CA) file to
-# use when creating self-signed certificates with `keystone-manage pki_setup`.
-# Set this together with `[signing] ca_key`. There is no reason to set this
-# option unless you are requesting revocation lists in a non-production
-# environment. Use a `[signing] certfile` issued from a trusted certificate
-# authority instead. (string value)
-# This option is deprecated for removal since P.
-# Its value may be silently ignored in the future.
-# Reason: `keystone-manage pki_setup` was deprecated in Mitaka and removed in
-# Pike. These options remain for backwards compatibility.
+# Absolute path to the public certificate authority (CA) file to use when
+# creating self-signed certificates with `keystone-manage pki_setup`. Set this
+# together with `[signing] ca_key`. There is no reason to set this option
+# unless you are requesting revocation lists in a non-production environment.
+# Use a `[signing] certfile` issued from a trusted certificate authority
+# instead. (string value)
 #ca_certs = /etc/keystone/ssl/certs/ca.pem
 
-# DEPRECATED: Absolute path to the private certificate authority (CA) key file
-# to use when creating self-signed certificates with `keystone-manage
-# pki_setup`. Set this together with `[signing] ca_certs`. There is no reason
-# to set this option unless you are requesting revocation lists in a non-
-# production environment. Use a `[signing] certfile` issued from a trusted
-# certificate authority instead. (string value)
-# This option is deprecated for removal since P.
-# Its value may be silently ignored in the future.
-# Reason: `keystone-manage pki_setup` was deprecated in Mitaka and removed in
-# Pike. These options remain for backwards compatibility.
+# Absolute path to the private certificate authority (CA) key file to use when
+# creating self-signed certificates with `keystone-manage pki_setup`. Set this
+# together with `[signing] ca_certs`. There is no reason to set this option
+# unless you are requesting revocation lists in a non-production environment.
+# Use a `[signing] certfile` issued from a trusted certificate authority
+# instead. (string value)
 #ca_key = /etc/keystone/ssl/private/cakey.pem
 
-# DEPRECATED: Key size (in bits) to use when generating a self-signed token
+# Key size (in bits) to use when generating a self-signed token signing
+# certificate. There is no reason to set this option unless you are requesting
+# revocation lists in a non-production environment. Use a `[signing] certfile`
+# issued from a trusted certificate authority instead. (integer value)
+# Minimum value: 1024
+#key_size = 2048
+
+# The validity period (in days) to use when generating a self-signed token
 # signing certificate. There is no reason to set this option unless you are
 # requesting revocation lists in a non-production environment. Use a `[signing]
 # certfile` issued from a trusted certificate authority instead. (integer
 # value)
-# Minimum value: 1024
-# This option is deprecated for removal since P.
-# Its value may be silently ignored in the future.
-# Reason: `keystone-manage pki_setup` was deprecated in Mitaka and removed in
-# Pike. These options remain for backwards compatibility.
-#key_size = 2048
-
-# DEPRECATED: The validity period (in days) to use when generating a self-
-# signed token signing certificate. There is no reason to set this option
-# unless you are requesting revocation lists in a non-production environment.
-# Use a `[signing] certfile` issued from a trusted certificate authority
-# instead. (integer value)
-# This option is deprecated for removal since P.
-# Its value may be silently ignored in the future.
-# Reason: `keystone-manage pki_setup` was deprecated in Mitaka and removed in
-# Pike. These options remain for backwards compatibility.
 #valid_days = 3650
 
-# DEPRECATED: The certificate subject to use when generating a self-signed
-# token signing certificate. There is no reason to set this option unless you
-# are requesting revocation lists in a non-production environment. Use a
-# `[signing] certfile` issued from a trusted certificate authority instead.
-# (string value)
-# This option is deprecated for removal since P.
-# Its value may be silently ignored in the future.
-# Reason: `keystone-manage pki_setup` was deprecated in Mitaka and removed in
-# Pike. These options remain for backwards compatibility.
+# The certificate subject to use when generating a self-signed token signing
+# certificate. There is no reason to set this option unless you are requesting
+# revocation lists in a non-production environment. Use a `[signing] certfile`
+# issued from a trusted certificate authority instead. (string value)
 #cert_subject = /C=US/ST=Unset/L=Unset/O=Unset/CN=www.example.com
 
 
@@ -2734,18 +2848,16 @@
 # enforced according to the `[token] enforce_token_bind` option. (list value)
 #bind =
 
-# DEPRECATED: This controls the token binding enforcement policy on tokens
-# presented to keystone with token binding metadata (as specified by the
-# `[token] bind` option). `disabled` completely bypasses token binding
-# validation. `permissive` and `strict` do not require tokens to have binding
-# metadata (but will validate it if present), whereas `required` will always
-# demand tokens to having binding metadata. `permissive` will allow unsupported
-# binding metadata to pass through without validation (usually to be validated
-# at another time by another component), whereas `strict` and `required` will
-# demand that the included binding metadata be supported by keystone. (string
-# value)
-# This option is deprecated for removal since P.
-# Its value may be silently ignored in the future.
+# This controls the token binding enforcement policy on tokens presented to
+# keystone with token binding metadata (as specified by the `[token] bind`
+# option). `disabled` completely bypasses token binding validation.
+# `permissive` and `strict` do not require tokens to have binding metadata (but
+# will validate it if present), whereas `required` will always demand tokens to
+# having binding metadata. `permissive` will allow unsupported binding metadata
+# to pass through without validation (usually to be validated at another time
+# by another component), whereas `strict` and `required` will demand that the
+# included binding metadata be supported by keystone. (string value)
+# Allowed values: disabled, permissive, strict, required
 #enforce_token_bind = permissive
 
 # The amount of time that a token should remain valid (in seconds). Drastically
@@ -2758,6 +2870,7 @@
 # Minimum value: 0
 # Maximum value: 9223372036854775807
 #expiration = 3600
+expiration = 3600
 
 # Entry point for the token provider in the `keystone.token.provider`
 # namespace. The token provider controls the token construction, validation,
@@ -2767,20 +2880,25 @@
 # setup. `fernet` tokens do not need to be persisted at all, but require that
 # you run `keystone-manage fernet_setup` (also see the `keystone-manage
 # fernet_rotate` command). (string value)
-#provider = fernet
-
-# DEPRECATED: Entry point for the token persistence backend driver in the
-# `keystone.token.persistence` namespace. Keystone provides the `sql` driver.
-# The `sql` option (default) depends on the options in your `[database]`
-# section. If you're using the `fernet` `[token] provider`, this backend will
-# not be utilized to persist tokens at all. (string value)
-# This option is deprecated for removal since P.
-# Its value may be silently ignored in the future.
+
+provider = fernet
+
+# Depricated since previous version
+#provider = keystone.token.providers.fernet.Provider
+
+# Entry point for the token persistence backend driver in the
+# `keystone.token.persistence` namespace. Keystone provides `kvs` and `sql`
+# drivers. The `kvs` backend depends on the configuration in the `[kvs]`
+# section. The `sql` option (default) depends on the options in your
+# `[database]` section. If you're using the `fernet` `[token] provider`, this
+# backend will not be utilized to persist tokens at all. (string value)
 #driver = sql
+driver = keystone.token.persistence.backends.memcache_pool.Token
 
 # Toggle for caching token creation and validation data. This has no effect
 # unless global caching is enabled. (boolean value)
 #caching = true
+caching = false
 
 # The number of seconds to cache token creation and validation data. This has
 # no effect unless both global and `[token] caching` are enabled. (integer
@@ -2795,8 +2913,9 @@
 # of tokens to consider revoked. Do not disable this option if you're using the
 # `kvs` `[revoke] driver`. (boolean value)
 #revoke_by_id = true
-
-# This toggles whether scoped tokens may be re-scoped to a new project or
+revoke_by_id = False
+
+# This toggles whether scoped tokens may be be re-scoped to a new project or
 # domain, thereby preventing users from exchanging a scoped token (including
 # those with a default project scope) for any other token. This forces users to
 # either authenticate for unscoped tokens (and later exchange that unscoped
@@ -2821,6 +2940,7 @@
 # Defaults to two days. (integer value)
 #allow_expired_window = 172800
 
+hash_algorithm = sha256
 
 [tokenless_auth]
 
@@ -2877,3 +2997,7 @@
 # Keystone only provides a `sql` driver, so there is no reason to change this
 # unless you are providing a custom entry point. (string value)
 #driver = sql
+[extra_headers]
+Distribution = Ubuntu
+
+

2018-05-09 23:21:55,564 [salt.state       ][INFO    ][18262] Completed state [/etc/keystone/keystone.conf] at time 23:21:55.564657 duration_in_ms=234.581
2018-05-09 23:21:55,564 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/sites-enabled/keystone.conf] at time 23:21:55.564899
2018-05-09 23:21:55,565 [salt.state       ][INFO    ][18262] Executing state file.absent for /etc/apache2/sites-enabled/keystone.conf
2018-05-09 23:21:55,565 [salt.state       ][INFO    ][18262] {'removed': '/etc/apache2/sites-enabled/keystone.conf'}
2018-05-09 23:21:55,565 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/sites-enabled/keystone.conf] at time 23:21:55.565629 duration_in_ms=0.729
2018-05-09 23:21:55,565 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/sites-enabled/wsgi-keystone.conf] at time 23:21:55.565837
2018-05-09 23:21:55,566 [salt.state       ][INFO    ][18262] Executing state file.absent for /etc/apache2/sites-enabled/wsgi-keystone.conf
2018-05-09 23:21:55,566 [salt.state       ][INFO    ][18262] File /etc/apache2/sites-enabled/wsgi-keystone.conf is not present
2018-05-09 23:21:55,566 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/sites-enabled/wsgi-keystone.conf] at time 23:21:55.566514 duration_in_ms=0.677
2018-05-09 23:21:55,567 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 23:21:55.567056
2018-05-09 23:21:55,567 [salt.state       ][INFO    ][18262] Executing state file.managed for /etc/apache2/sites-available/keystone_wsgi.conf
2018-05-09 23:21:55,592 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'keystone/files/apache.conf'
2018-05-09 23:21:55,646 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'keystone/files/pike/wsgi-keystone.conf'
2018-05-09 23:21:55,723 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-05-09 23:21:55,789 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-05-09 23:21:55,810 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-05-09 23:21:55,838 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/files/_locations.conf'
2018-05-09 23:21:55,867 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-05-09 23:21:55,882 [salt.state       ][INFO    ][18262] File changed:
New file
2018-05-09 23:21:55,882 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 23:21:55.882317 duration_in_ms=315.261
2018-05-09 23:21:55,882 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 23:21:55.882933
2018-05-09 23:21:55,883 [salt.state       ][INFO    ][18262] Executing state file.symlink for /etc/apache2/sites-enabled/keystone_wsgi.conf
2018-05-09 23:21:55,885 [salt.state       ][INFO    ][18262] {'new': '/etc/apache2/sites-enabled/keystone_wsgi.conf'}
2018-05-09 23:21:55,885 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 23:21:55.885309 duration_in_ms=2.376
2018-05-09 23:21:55,890 [salt.state       ][INFO    ][18262] Running state [apache2] at time 23:21:55.890212
2018-05-09 23:21:55,890 [salt.state       ][INFO    ][18262] Executing state service.running for apache2
2018-05-09 23:21:55,891 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-05-09 23:21:55,914 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:21:55,929 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:21:55,951 [salt.state       ][INFO    ][18262] The service apache2 is already running
2018-05-09 23:21:55,951 [salt.state       ][INFO    ][18262] Completed state [apache2] at time 23:21:55.951537 duration_in_ms=61.324
2018-05-09 23:21:55,952 [salt.state       ][INFO    ][18262] Running state [apache2] at time 23:21:55.952193
2018-05-09 23:21:55,952 [salt.state       ][INFO    ][18262] Executing state service.mod_watch for apache2
2018-05-09 23:21:55,953 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:21:55,968 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:21:55,987 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-05-09 23:21:56,149 [salt.state       ][INFO    ][18262] {'apache2': True}
2018-05-09 23:21:56,150 [salt.state       ][INFO    ][18262] Completed state [apache2] at time 23:21:56.149945 duration_in_ms=197.752
2018-05-09 23:21:56,151 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/conf-enabled/security.conf] at time 23:21:56.151154
2018-05-09 23:21:56,151 [salt.state       ][INFO    ][18262] Executing state file.symlink for /etc/apache2/conf-enabled/security.conf
2018-05-09 23:21:56,153 [salt.state       ][INFO    ][18262] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-05-09 23:21:56,153 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/conf-enabled/security.conf] at time 23:21:56.153395 duration_in_ms=2.242
2018-05-09 23:21:56,153 [salt.state       ][INFO    ][18262] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 23:21:56.153669
2018-05-09 23:21:56,153 [salt.state       ][INFO    ][18262] Executing state file.absent for /etc/apache2/sites-enabled/keystone_wsgi
2018-05-09 23:21:56,154 [salt.state       ][INFO    ][18262] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2018-05-09 23:21:56,154 [salt.state       ][INFO    ][18262] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 23:21:56.154458 duration_in_ms=0.789
2018-05-09 23:21:56,155 [salt.state       ][INFO    ][18262] Running state [keystone] at time 23:21:56.155080
2018-05-09 23:21:56,155 [salt.state       ][INFO    ][18262] Executing state service.dead for keystone
2018-05-09 23:21:56,156 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['systemctl', 'status', 'keystone.service', '-n', '0'] in directory '/root'
2018-05-09 23:21:56,171 [salt.state       ][INFO    ][18262] The named service keystone is not available
2018-05-09 23:21:56,172 [salt.state       ][INFO    ][18262] Completed state [keystone] at time 23:21:56.172452 duration_in_ms=17.372
2018-05-09 23:21:56,172 [salt.state       ][INFO    ][18262] Running state [keystone] at time 23:21:56.172724
2018-05-09 23:21:56,173 [salt.state       ][INFO    ][18262] Executing state service.mod_watch for keystone
2018-05-09 23:21:56,173 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command ['systemctl', 'is-active', 'keystone.service'] in directory '/root'
2018-05-09 23:21:56,187 [salt.state       ][INFO    ][18262] Service is already stopped
2018-05-09 23:21:56,187 [salt.state       ][INFO    ][18262] Completed state [keystone] at time 23:21:56.187330 duration_in_ms=14.606
2018-05-09 23:21:56,188 [salt.state       ][INFO    ][18262] Running state [/root/keystonerc] at time 23:21:56.188235
2018-05-09 23:21:56,188 [salt.state       ][INFO    ][18262] Executing state file.managed for /root/keystonerc
2018-05-09 23:21:56,208 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'keystone/files/keystonerc'
2018-05-09 23:21:56,275 [salt.state       ][INFO    ][18262] File changed:
New file
2018-05-09 23:21:56,275 [salt.state       ][INFO    ][18262] Completed state [/root/keystonerc] at time 23:21:56.275666 duration_in_ms=87.431
2018-05-09 23:21:56,276 [salt.state       ][INFO    ][18262] Running state [/root/keystonercv3] at time 23:21:56.276636
2018-05-09 23:21:56,276 [salt.state       ][INFO    ][18262] Executing state file.managed for /root/keystonercv3
2018-05-09 23:21:56,300 [salt.fileclient  ][INFO    ][18262] Fetching file from saltenv 'base', ** done ** 'keystone/files/keystonercv3'
2018-05-09 23:21:56,355 [salt.state       ][INFO    ][18262] File changed:
New file
2018-05-09 23:21:56,355 [salt.state       ][INFO    ][18262] Completed state [/root/keystonercv3] at time 23:21:56.355865 duration_in_ms=79.229
2018-05-09 23:21:56,356 [salt.state       ][INFO    ][18262] Running state [keystone-manage db_sync && sleep 1] at time 23:21:56.356424
2018-05-09 23:21:56,356 [salt.state       ][INFO    ][18262] Executing state cmd.run for keystone-manage db_sync && sleep 1
2018-05-09 23:21:56,357 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command 'keystone-manage db_sync && sleep 1' in directory '/root'
2018-05-09 23:21:56,753 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232156733906
2018-05-09 23:21:56,769 [salt.minion      ][INFO    ][21786] Starting a new job with PID 21786
2018-05-09 23:21:56,786 [salt.minion      ][INFO    ][21786] Returning information for job: 20180509232156733906
2018-05-09 23:22:02,659 [salt.state       ][INFO    ][18262] {'pid': 21780, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:22:02,660 [salt.state       ][INFO    ][18262] Completed state [keystone-manage db_sync && sleep 1] at time 23:22:02.660118 duration_in_ms=6303.692
2018-05-09 23:22:02,661 [salt.state       ][INFO    ][18262] Running state [/var/lib/keystone/fernet-keys] at time 23:22:02.661021
2018-05-09 23:22:02,661 [salt.state       ][INFO    ][18262] Executing state file.directory for /var/lib/keystone/fernet-keys
2018-05-09 23:22:02,663 [salt.state       ][INFO    ][18262] {'/var/lib/keystone/fernet-keys': 'New Dir'}
2018-05-09 23:22:02,663 [salt.state       ][INFO    ][18262] Completed state [/var/lib/keystone/fernet-keys] at time 23:22:02.663687 duration_in_ms=2.666
2018-05-09 23:22:02,664 [salt.state       ][INFO    ][18262] Running state [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone] at time 23:22:02.664815
2018-05-09 23:22:02,665 [salt.state       ][INFO    ][18262] Executing state cmd.run for keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone
2018-05-09 23:22:02,665 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command 'keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone' in directory '/root'
2018-05-09 23:22:03,887 [salt.state       ][INFO    ][18262] {'pid': 21971, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:22:03,887 [salt.state       ][INFO    ][18262] Completed state [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone] at time 23:22:03.887596 duration_in_ms=1222.78
2018-05-09 23:22:03,888 [salt.state       ][INFO    ][18262] Running state [/var/lib/keystone/credential-keys] at time 23:22:03.888490
2018-05-09 23:22:03,888 [salt.state       ][INFO    ][18262] Executing state file.directory for /var/lib/keystone/credential-keys
2018-05-09 23:22:03,890 [salt.state       ][INFO    ][18262] {'/var/lib/keystone/credential-keys': 'New Dir'}
2018-05-09 23:22:03,891 [salt.state       ][INFO    ][18262] Completed state [/var/lib/keystone/credential-keys] at time 23:22:03.891089 duration_in_ms=2.598
2018-05-09 23:22:03,892 [salt.state       ][INFO    ][18262] Running state [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone] at time 23:22:03.892243
2018-05-09 23:22:03,892 [salt.state       ][INFO    ][18262] Executing state cmd.run for keystone-manage credential_setup --keystone-user keystone --keystone-group keystone
2018-05-09 23:22:03,893 [salt.loaded.int.module.cmdmod][INFO    ][18262] Executing command 'keystone-manage credential_setup --keystone-user keystone --keystone-group keystone' in directory '/root'
2018-05-09 23:22:05,148 [salt.state       ][INFO    ][18262] {'pid': 21983, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:22:05,148 [salt.state       ][INFO    ][18262] Completed state [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone] at time 23:22:05.148791 duration_in_ms=1256.546
2018-05-09 23:22:05,157 [salt.state       ][INFO    ][18262] Running state [service] at time 23:22:05.157724
2018-05-09 23:22:05,158 [salt.state       ][INFO    ][18262] Executing state keystoneng.tenant_present for service
2018-05-09 23:22:06,967 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232206939981
2018-05-09 23:22:06,987 [salt.minion      ][INFO    ][21999] Starting a new job with PID 21999
2018-05-09 23:22:07,012 [salt.minion      ][INFO    ][21999] Returning information for job: 20180509232206939981
2018-05-09 23:22:09,496 [salt.state       ][INFO    ][18262] {'Tenant': 'Created'}
2018-05-09 23:22:09,496 [salt.state       ][INFO    ][18262] Completed state [service] at time 23:22:09.496802 duration_in_ms=4339.078
2018-05-09 23:22:09,497 [salt.state       ][INFO    ][18262] Running state [admin] at time 23:22:09.497686
2018-05-09 23:22:09,497 [salt.state       ][INFO    ][18262] Executing state keystoneng.tenant_present for admin
2018-05-09 23:22:09,715 [salt.state       ][INFO    ][18262] {'Tenant': 'Created'}
2018-05-09 23:22:09,715 [salt.state       ][INFO    ][18262] Completed state [admin] at time 23:22:09.715754 duration_in_ms=218.067
2018-05-09 23:22:09,716 [salt.state       ][INFO    ][18262] Running state [admin] at time 23:22:09.716483
2018-05-09 23:22:09,716 [salt.state       ][INFO    ][18262] Executing state keystoneng.role_present for admin
2018-05-09 23:22:09,946 [salt.state       ][INFO    ][18262] {'Role': 'Created'}
2018-05-09 23:22:09,947 [salt.state       ][INFO    ][18262] Completed state [admin] at time 23:22:09.947508 duration_in_ms=231.024
2018-05-09 23:22:09,948 [salt.state       ][INFO    ][18262] Running state [Member] at time 23:22:09.948844
2018-05-09 23:22:09,949 [salt.state       ][INFO    ][18262] Executing state keystoneng.role_present for Member
2018-05-09 23:22:10,117 [salt.state       ][INFO    ][18262] {'Role': 'Created'}
2018-05-09 23:22:10,118 [salt.state       ][INFO    ][18262] Completed state [Member] at time 23:22:10.118537 duration_in_ms=169.693
2018-05-09 23:22:10,119 [salt.state       ][INFO    ][18262] Running state [image_manager] at time 23:22:10.119827
2018-05-09 23:22:10,120 [salt.state       ][INFO    ][18262] Executing state keystoneng.role_present for image_manager
2018-05-09 23:22:10,224 [salt.state       ][INFO    ][18262] {'Role': 'Created'}
2018-05-09 23:22:10,224 [salt.state       ][INFO    ][18262] Completed state [image_manager] at time 23:22:10.224420 duration_in_ms=104.593
2018-05-09 23:22:10,225 [salt.state       ][INFO    ][18262] Running state [admin] at time 23:22:10.225675
2018-05-09 23:22:10,227 [salt.state       ][INFO    ][18262] Executing state keystoneng.user_present for admin
2018-05-09 23:22:10,937 [salt.state       ][INFO    ][18262] {'User': 'Created'}
2018-05-09 23:22:10,937 [salt.state       ][INFO    ][18262] Completed state [admin] at time 23:22:10.937751 duration_in_ms=712.074
2018-05-09 23:22:10,941 [salt.minion      ][INFO    ][18262] Returning information for job: 20180509232106133594
2018-05-09 23:22:11,697 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command service.restart with jid 20180509232211676942
2018-05-09 23:22:11,709 [salt.minion      ][INFO    ][22022] Starting a new job with PID 22022
2018-05-09 23:22:12,556 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][22022] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-05-09 23:22:12,578 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][22022] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:22:12,612 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][22022] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-05-09 23:22:15,881 [salt.minion      ][INFO    ][22022] Returning information for job: 20180509232211676942
2018-05-09 23:22:16,560 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232216538451
2018-05-09 23:22:16,580 [salt.minion      ][INFO    ][22303] Starting a new job with PID 22303
2018-05-09 23:22:18,978 [salt.state       ][INFO    ][22303] Loading fresh modules for state activity
2018-05-09 23:22:20,735 [salt.state       ][INFO    ][22303] Running state [keystone] at time 23:22:20.735096
2018-05-09 23:22:20,735 [salt.state       ][INFO    ][22303] Executing state pkg.installed for keystone
2018-05-09 23:22:20,736 [salt.loaded.int.module.cmdmod][INFO    ][22303] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:22:21,151 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,152 [salt.state       ][INFO    ][22303] Completed state [keystone] at time 23:22:21.152103 duration_in_ms=417.007
2018-05-09 23:22:21,152 [salt.state       ][INFO    ][22303] Running state [python-keystone] at time 23:22:21.152666
2018-05-09 23:22:21,153 [salt.state       ][INFO    ][22303] Executing state pkg.installed for python-keystone
2018-05-09 23:22:21,160 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,160 [salt.state       ][INFO    ][22303] Completed state [python-keystone] at time 23:22:21.160945 duration_in_ms=8.279
2018-05-09 23:22:21,161 [salt.state       ][INFO    ][22303] Running state [python-keystoneclient] at time 23:22:21.161397
2018-05-09 23:22:21,161 [salt.state       ][INFO    ][22303] Executing state pkg.installed for python-keystoneclient
2018-05-09 23:22:21,168 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,169 [salt.state       ][INFO    ][22303] Completed state [python-keystoneclient] at time 23:22:21.169304 duration_in_ms=7.906
2018-05-09 23:22:21,169 [salt.state       ][INFO    ][22303] Running state [python-psycopg2] at time 23:22:21.169752
2018-05-09 23:22:21,170 [salt.state       ][INFO    ][22303] Executing state pkg.installed for python-psycopg2
2018-05-09 23:22:21,177 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,178 [salt.state       ][INFO    ][22303] Completed state [python-psycopg2] at time 23:22:21.178133 duration_in_ms=8.381
2018-05-09 23:22:21,178 [salt.state       ][INFO    ][22303] Running state [python-mysqldb] at time 23:22:21.178618
2018-05-09 23:22:21,179 [salt.state       ][INFO    ][22303] Executing state pkg.installed for python-mysqldb
2018-05-09 23:22:21,186 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,187 [salt.state       ][INFO    ][22303] Completed state [python-mysqldb] at time 23:22:21.187111 duration_in_ms=8.493
2018-05-09 23:22:21,187 [salt.state       ][INFO    ][22303] Running state [mysql-client] at time 23:22:21.187870
2018-05-09 23:22:21,188 [salt.state       ][INFO    ][22303] Executing state pkg.installed for mysql-client
2018-05-09 23:22:21,196 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,196 [salt.state       ][INFO    ][22303] Completed state [mysql-client] at time 23:22:21.196897 duration_in_ms=9.027
2018-05-09 23:22:21,197 [salt.state       ][INFO    ][22303] Running state [python-six] at time 23:22:21.197337
2018-05-09 23:22:21,197 [salt.state       ][INFO    ][22303] Executing state pkg.installed for python-six
2018-05-09 23:22:21,205 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,206 [salt.state       ][INFO    ][22303] Completed state [python-six] at time 23:22:21.206009 duration_in_ms=8.672
2018-05-09 23:22:21,206 [salt.state       ][INFO    ][22303] Running state [python-memcache] at time 23:22:21.206792
2018-05-09 23:22:21,207 [salt.state       ][INFO    ][22303] Executing state pkg.installed for python-memcache
2018-05-09 23:22:21,214 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,214 [salt.state       ][INFO    ][22303] Completed state [python-memcache] at time 23:22:21.214405 duration_in_ms=7.613
2018-05-09 23:22:21,214 [salt.state       ][INFO    ][22303] Running state [python-openstackclient] at time 23:22:21.214850
2018-05-09 23:22:21,215 [salt.state       ][INFO    ][22303] Executing state pkg.installed for python-openstackclient
2018-05-09 23:22:21,222 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,223 [salt.state       ][INFO    ][22303] Completed state [python-openstackclient] at time 23:22:21.223164 duration_in_ms=8.313
2018-05-09 23:22:21,223 [salt.state       ][INFO    ][22303] Running state [gettext-base] at time 23:22:21.223605
2018-05-09 23:22:21,224 [salt.state       ][INFO    ][22303] Executing state pkg.installed for gettext-base
2018-05-09 23:22:21,231 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,232 [salt.state       ][INFO    ][22303] Completed state [gettext-base] at time 23:22:21.232305 duration_in_ms=8.7
2018-05-09 23:22:21,232 [salt.state       ][INFO    ][22303] Running state [python-pycadf] at time 23:22:21.232745
2018-05-09 23:22:21,233 [salt.state       ][INFO    ][22303] Executing state pkg.installed for python-pycadf
2018-05-09 23:22:21,239 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,240 [salt.state       ][INFO    ][22303] Completed state [python-pycadf] at time 23:22:21.240737 duration_in_ms=7.992
2018-05-09 23:22:21,241 [salt.state       ][INFO    ][22303] Running state [apache2] at time 23:22:21.241530
2018-05-09 23:22:21,241 [salt.state       ][INFO    ][22303] Executing state pkg.installed for apache2
2018-05-09 23:22:21,249 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,250 [salt.state       ][INFO    ][22303] Completed state [apache2] at time 23:22:21.250169 duration_in_ms=8.639
2018-05-09 23:22:21,251 [salt.state       ][INFO    ][22303] Running state [a2enmod ssl] at time 23:22:21.250992
2018-05-09 23:22:21,251 [salt.state       ][INFO    ][22303] Executing state cmd.run for a2enmod ssl
2018-05-09 23:22:21,252 [salt.state       ][INFO    ][22303] /etc/apache2/mods-enabled/ssl.load exists
2018-05-09 23:22:21,252 [salt.state       ][INFO    ][22303] Completed state [a2enmod ssl] at time 23:22:21.252771 duration_in_ms=1.779
2018-05-09 23:22:21,253 [salt.state       ][INFO    ][22303] Running state [a2enmod rewrite] at time 23:22:21.253522
2018-05-09 23:22:21,253 [salt.state       ][INFO    ][22303] Executing state cmd.run for a2enmod rewrite
2018-05-09 23:22:21,254 [salt.state       ][INFO    ][22303] /etc/apache2/mods-enabled/rewrite.load exists
2018-05-09 23:22:21,254 [salt.state       ][INFO    ][22303] Completed state [a2enmod rewrite] at time 23:22:21.254896 duration_in_ms=1.375
2018-05-09 23:22:21,255 [salt.state       ][INFO    ][22303] Running state [libapache2-mod-wsgi] at time 23:22:21.255628
2018-05-09 23:22:21,256 [salt.state       ][INFO    ][22303] Executing state pkg.installed for libapache2-mod-wsgi
2018-05-09 23:22:21,263 [salt.state       ][INFO    ][22303] All specified packages are already installed
2018-05-09 23:22:21,263 [salt.state       ][INFO    ][22303] Completed state [libapache2-mod-wsgi] at time 23:22:21.263686 duration_in_ms=8.057
2018-05-09 23:22:21,264 [salt.state       ][INFO    ][22303] Running state [a2enmod wsgi] at time 23:22:21.264443
2018-05-09 23:22:21,264 [salt.state       ][INFO    ][22303] Executing state cmd.run for a2enmod wsgi
2018-05-09 23:22:21,265 [salt.state       ][INFO    ][22303] /etc/apache2/mods-enabled/wsgi.load exists
2018-05-09 23:22:21,265 [salt.state       ][INFO    ][22303] Completed state [a2enmod wsgi] at time 23:22:21.265811 duration_in_ms=1.368
2018-05-09 23:22:21,269 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 23:22:21.269300
2018-05-09 23:22:21,270 [salt.state       ][INFO    ][22303] Executing state file.absent for /etc/apache2/mods-enabled/mpm_prefork.load
2018-05-09 23:22:21,271 [salt.state       ][INFO    ][22303] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2018-05-09 23:22:21,271 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 23:22:21.271389 duration_in_ms=2.089
2018-05-09 23:22:21,271 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 23:22:21.271821
2018-05-09 23:22:21,272 [salt.state       ][INFO    ][22303] Executing state file.absent for /etc/apache2/mods-enabled/mpm_prefork.conf
2018-05-09 23:22:21,272 [salt.state       ][INFO    ][22303] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2018-05-09 23:22:21,273 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 23:22:21.273134 duration_in_ms=1.313
2018-05-09 23:22:21,273 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:22:21.273566
2018-05-09 23:22:21,274 [salt.state       ][INFO    ][22303] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.load
2018-05-09 23:22:21,274 [salt.state       ][INFO    ][22303] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-05-09 23:22:21,274 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:22:21.274887 duration_in_ms=1.321
2018-05-09 23:22:21,275 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:22:21.275312
2018-05-09 23:22:21,275 [salt.state       ][INFO    ][22303] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.conf
2018-05-09 23:22:21,276 [salt.state       ][INFO    ][22303] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-05-09 23:22:21,276 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:22:21.276958 duration_in_ms=1.646
2018-05-09 23:22:21,279 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 23:22:21.279745
2018-05-09 23:22:21,280 [salt.state       ][INFO    ][22303] Executing state file.managed for /etc/apache2/mods-available/mpm_event.conf
2018-05-09 23:22:21,345 [salt.state       ][INFO    ][22303] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2018-05-09 23:22:21,345 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 23:22:21.345674 duration_in_ms=65.929
2018-05-09 23:22:21,347 [salt.state       ][INFO    ][22303] Running state [a2enmod mpm_event] at time 23:22:21.347010
2018-05-09 23:22:21,347 [salt.state       ][INFO    ][22303] Executing state cmd.run for a2enmod mpm_event
2018-05-09 23:22:21,348 [salt.state       ][INFO    ][22303] /etc/apache2/mods-enabled/mpm_event.load exists
2018-05-09 23:22:21,348 [salt.state       ][INFO    ][22303] Completed state [a2enmod mpm_event] at time 23:22:21.348419 duration_in_ms=1.409
2018-05-09 23:22:21,349 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/ports.conf] at time 23:22:21.349168
2018-05-09 23:22:21,349 [salt.state       ][INFO    ][22303] Executing state file.managed for /etc/apache2/ports.conf
2018-05-09 23:22:21,413 [salt.state       ][INFO    ][22303] File /etc/apache2/ports.conf is in the correct state
2018-05-09 23:22:21,414 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/ports.conf] at time 23:22:21.414745 duration_in_ms=65.576
2018-05-09 23:22:21,416 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/conf-available/security.conf] at time 23:22:21.416504
2018-05-09 23:22:21,417 [salt.state       ][INFO    ][22303] Executing state file.managed for /etc/apache2/conf-available/security.conf
2018-05-09 23:22:21,488 [salt.state       ][INFO    ][22303] File /etc/apache2/conf-available/security.conf is in the correct state
2018-05-09 23:22:21,488 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/conf-available/security.conf] at time 23:22:21.488443 duration_in_ms=71.94
2018-05-09 23:22:21,501 [salt.state       ][INFO    ][22303] Running state [/etc/keystone/policy.json] at time 23:22:21.501321
2018-05-09 23:22:21,501 [salt.state       ][INFO    ][22303] Executing state file.managed for /etc/keystone/policy.json
2018-05-09 23:22:21,502 [salt.loaded.int.states.file][WARNING ][22303] State for file: /etc/keystone/policy.json - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-05-09 23:22:21,503 [salt.state       ][INFO    ][22303] File /etc/keystone/policy.json exists with proper permissions. No changes made.
2018-05-09 23:22:21,503 [salt.state       ][INFO    ][22303] Completed state [/etc/keystone/policy.json] at time 23:22:21.503575 duration_in_ms=2.254
2018-05-09 23:22:21,504 [salt.state       ][INFO    ][22303] Running state [/etc/keystone/keystone-paste.ini] at time 23:22:21.504351
2018-05-09 23:22:21,504 [salt.state       ][INFO    ][22303] Executing state file.managed for /etc/keystone/keystone-paste.ini
2018-05-09 23:22:21,525 [salt.state       ][INFO    ][22303] File /etc/keystone/keystone-paste.ini is in the correct state
2018-05-09 23:22:21,526 [salt.state       ][INFO    ][22303] Completed state [/etc/keystone/keystone-paste.ini] at time 23:22:21.526249 duration_in_ms=21.897
2018-05-09 23:22:21,526 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 23:22:21.526759
2018-05-09 23:22:21,527 [salt.state       ][INFO    ][22303] Executing state file.absent for /etc/apache2/sites-enabled/000-default.conf
2018-05-09 23:22:21,528 [salt.state       ][INFO    ][22303] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-05-09 23:22:21,528 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 23:22:21.528490 duration_in_ms=1.731
2018-05-09 23:22:21,529 [salt.state       ][INFO    ][22303] Running state [/etc/keystone/keystone.conf] at time 23:22:21.529351
2018-05-09 23:22:21,529 [salt.state       ][INFO    ][22303] Executing state file.managed for /etc/keystone/keystone.conf
2018-05-09 23:22:21,704 [salt.state       ][INFO    ][22303] File /etc/keystone/keystone.conf is in the correct state
2018-05-09 23:22:21,705 [salt.state       ][INFO    ][22303] Completed state [/etc/keystone/keystone.conf] at time 23:22:21.705597 duration_in_ms=176.246
2018-05-09 23:22:21,706 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/sites-enabled/keystone.conf] at time 23:22:21.706083
2018-05-09 23:22:21,706 [salt.state       ][INFO    ][22303] Executing state file.absent for /etc/apache2/sites-enabled/keystone.conf
2018-05-09 23:22:21,707 [salt.state       ][INFO    ][22303] File /etc/apache2/sites-enabled/keystone.conf is not present
2018-05-09 23:22:21,707 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/sites-enabled/keystone.conf] at time 23:22:21.707791 duration_in_ms=1.708
2018-05-09 23:22:21,708 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/sites-enabled/wsgi-keystone.conf] at time 23:22:21.708579
2018-05-09 23:22:21,709 [salt.state       ][INFO    ][22303] Executing state file.absent for /etc/apache2/sites-enabled/wsgi-keystone.conf
2018-05-09 23:22:21,709 [salt.state       ][INFO    ][22303] File /etc/apache2/sites-enabled/wsgi-keystone.conf is not present
2018-05-09 23:22:21,709 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/sites-enabled/wsgi-keystone.conf] at time 23:22:21.709887 duration_in_ms=1.308
2018-05-09 23:22:21,710 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 23:22:21.710674
2018-05-09 23:22:21,711 [salt.state       ][INFO    ][22303] Executing state file.managed for /etc/apache2/sites-available/keystone_wsgi.conf
2018-05-09 23:22:21,975 [salt.state       ][INFO    ][22303] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2018-05-09 23:22:21,975 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 23:22:21.975928 duration_in_ms=265.254
2018-05-09 23:22:21,976 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 23:22:21.976702
2018-05-09 23:22:21,977 [salt.state       ][INFO    ][22303] Executing state file.symlink for /etc/apache2/sites-enabled/keystone_wsgi.conf
2018-05-09 23:22:21,978 [salt.state       ][INFO    ][22303] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2018-05-09 23:22:21,979 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 23:22:21.979250 duration_in_ms=2.548
2018-05-09 23:22:21,984 [salt.state       ][INFO    ][22303] Running state [apache2] at time 23:22:21.984744
2018-05-09 23:22:21,985 [salt.state       ][INFO    ][22303] Executing state service.running for apache2
2018-05-09 23:22:21,985 [salt.loaded.int.module.cmdmod][INFO    ][22303] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-05-09 23:22:22,023 [salt.loaded.int.module.cmdmod][INFO    ][22303] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:22:22,044 [salt.loaded.int.module.cmdmod][INFO    ][22303] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:22:22,066 [salt.state       ][INFO    ][22303] The service apache2 is already running
2018-05-09 23:22:22,066 [salt.state       ][INFO    ][22303] Completed state [apache2] at time 23:22:22.066759 duration_in_ms=82.013
2018-05-09 23:22:22,068 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/conf-enabled/security.conf] at time 23:22:22.068710
2018-05-09 23:22:22,069 [salt.state       ][INFO    ][22303] Executing state file.symlink for /etc/apache2/conf-enabled/security.conf
2018-05-09 23:22:22,072 [salt.state       ][INFO    ][22303] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-05-09 23:22:22,072 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/conf-enabled/security.conf] at time 23:22:22.072857 duration_in_ms=4.147
2018-05-09 23:22:22,073 [salt.state       ][INFO    ][22303] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 23:22:22.073566
2018-05-09 23:22:22,074 [salt.state       ][INFO    ][22303] Executing state file.absent for /etc/apache2/sites-enabled/keystone_wsgi
2018-05-09 23:22:22,075 [salt.state       ][INFO    ][22303] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2018-05-09 23:22:22,076 [salt.state       ][INFO    ][22303] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 23:22:22.076149 duration_in_ms=2.583
2018-05-09 23:22:22,077 [salt.state       ][INFO    ][22303] Running state [keystone] at time 23:22:22.077361
2018-05-09 23:22:22,078 [salt.state       ][INFO    ][22303] Executing state service.dead for keystone
2018-05-09 23:22:22,079 [salt.loaded.int.module.cmdmod][INFO    ][22303] Executing command ['systemctl', 'status', 'keystone.service', '-n', '0'] in directory '/root'
2018-05-09 23:22:22,096 [salt.state       ][INFO    ][22303] The named service keystone is not available
2018-05-09 23:22:22,097 [salt.state       ][INFO    ][22303] Completed state [keystone] at time 23:22:22.097455 duration_in_ms=20.092
2018-05-09 23:22:22,099 [salt.state       ][INFO    ][22303] Running state [/root/keystonerc] at time 23:22:22.099572
2018-05-09 23:22:22,100 [salt.state       ][INFO    ][22303] Executing state file.managed for /root/keystonerc
2018-05-09 23:22:22,168 [salt.state       ][INFO    ][22303] File /root/keystonerc is in the correct state
2018-05-09 23:22:22,168 [salt.state       ][INFO    ][22303] Completed state [/root/keystonerc] at time 23:22:22.168494 duration_in_ms=68.922
2018-05-09 23:22:22,169 [salt.state       ][INFO    ][22303] Running state [/root/keystonercv3] at time 23:22:22.169296
2018-05-09 23:22:22,169 [salt.state       ][INFO    ][22303] Executing state file.managed for /root/keystonercv3
2018-05-09 23:22:22,231 [salt.state       ][INFO    ][22303] File /root/keystonercv3 is in the correct state
2018-05-09 23:22:22,231 [salt.state       ][INFO    ][22303] Completed state [/root/keystonercv3] at time 23:22:22.231459 duration_in_ms=62.163
2018-05-09 23:22:22,232 [salt.state       ][INFO    ][22303] Running state [keystone-manage db_sync && sleep 1] at time 23:22:22.232238
2018-05-09 23:22:22,232 [salt.state       ][INFO    ][22303] Executing state cmd.run for keystone-manage db_sync && sleep 1
2018-05-09 23:22:22,233 [salt.loaded.int.module.cmdmod][INFO    ][22303] Executing command 'keystone-manage db_sync && sleep 1' in directory '/root'
2018-05-09 23:22:24,624 [salt.state       ][INFO    ][22303] {'pid': 22363, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:22:24,625 [salt.state       ][INFO    ][22303] Completed state [keystone-manage db_sync && sleep 1] at time 23:22:24.625318 duration_in_ms=2393.077
2018-05-09 23:22:24,627 [salt.state       ][INFO    ][22303] Running state [/var/lib/keystone/fernet-keys] at time 23:22:24.627642
2018-05-09 23:22:24,628 [salt.state       ][INFO    ][22303] Executing state file.directory for /var/lib/keystone/fernet-keys
2018-05-09 23:22:24,629 [salt.state       ][INFO    ][22303] Directory /var/lib/keystone/fernet-keys is in the correct state
2018-05-09 23:22:24,630 [salt.state       ][INFO    ][22303] Completed state [/var/lib/keystone/fernet-keys] at time 23:22:24.630117 duration_in_ms=2.476
2018-05-09 23:22:24,631 [salt.state       ][INFO    ][22303] Running state [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone] at time 23:22:24.631437
2018-05-09 23:22:24,632 [salt.state       ][INFO    ][22303] Executing state cmd.run for keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone
2018-05-09 23:22:24,632 [salt.loaded.int.module.cmdmod][INFO    ][22303] Executing command 'keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone' in directory '/root'
2018-05-09 23:22:25,822 [salt.state       ][INFO    ][22303] {'pid': 22374, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:22:25,823 [salt.state       ][INFO    ][22303] Completed state [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone] at time 23:22:25.823207 duration_in_ms=1191.768
2018-05-09 23:22:25,825 [salt.state       ][INFO    ][22303] Running state [/var/lib/keystone/credential-keys] at time 23:22:25.825378
2018-05-09 23:22:25,826 [salt.state       ][INFO    ][22303] Executing state file.directory for /var/lib/keystone/credential-keys
2018-05-09 23:22:25,829 [salt.state       ][INFO    ][22303] Directory /var/lib/keystone/credential-keys is in the correct state
2018-05-09 23:22:25,830 [salt.state       ][INFO    ][22303] Completed state [/var/lib/keystone/credential-keys] at time 23:22:25.829989 duration_in_ms=4.613
2018-05-09 23:22:25,832 [salt.state       ][INFO    ][22303] Running state [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone] at time 23:22:25.832132
2018-05-09 23:22:25,832 [salt.state       ][INFO    ][22303] Executing state cmd.run for keystone-manage credential_setup --keystone-user keystone --keystone-group keystone
2018-05-09 23:22:25,833 [salt.loaded.int.module.cmdmod][INFO    ][22303] Executing command 'keystone-manage credential_setup --keystone-user keystone --keystone-group keystone' in directory '/root'
2018-05-09 23:22:26,672 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232226646474
2018-05-09 23:22:26,693 [salt.minion      ][INFO    ][22395] Starting a new job with PID 22395
2018-05-09 23:22:26,712 [salt.minion      ][INFO    ][22395] Returning information for job: 20180509232226646474
2018-05-09 23:22:27,079 [salt.state       ][INFO    ][22303] {'pid': 22381, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:22:27,081 [salt.state       ][INFO    ][22303] Completed state [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone] at time 23:22:27.081163 duration_in_ms=1249.029
2018-05-09 23:22:27,085 [salt.state       ][INFO    ][22303] Running state [service] at time 23:22:27.085634
2018-05-09 23:22:27,086 [salt.state       ][INFO    ][22303] Executing state keystoneng.tenant_present for service
2018-05-09 23:22:33,130 [salt.state       ][INFO    ][22303] Tenant / project "service" already exists
2018-05-09 23:22:33,130 [salt.state       ][INFO    ][22303] Completed state [service] at time 23:22:33.130382 duration_in_ms=6044.748
2018-05-09 23:22:33,131 [salt.state       ][INFO    ][22303] Running state [admin] at time 23:22:33.131227
2018-05-09 23:22:33,131 [salt.state       ][INFO    ][22303] Executing state keystoneng.tenant_present for admin
2018-05-09 23:22:33,179 [salt.state       ][INFO    ][22303] Tenant / project "admin" already exists
2018-05-09 23:22:33,180 [salt.state       ][INFO    ][22303] Completed state [admin] at time 23:22:33.180235 duration_in_ms=49.007
2018-05-09 23:22:33,182 [salt.state       ][INFO    ][22303] Running state [admin] at time 23:22:33.182094
2018-05-09 23:22:33,183 [salt.state       ][INFO    ][22303] Executing state keystoneng.role_present for admin
2018-05-09 23:22:33,320 [salt.state       ][INFO    ][22303] Role "admin" already exists
2018-05-09 23:22:33,321 [salt.state       ][INFO    ][22303] Completed state [admin] at time 23:22:33.321511 duration_in_ms=139.418
2018-05-09 23:22:33,322 [salt.state       ][INFO    ][22303] Running state [Member] at time 23:22:33.322825
2018-05-09 23:22:33,323 [salt.state       ][INFO    ][22303] Executing state keystoneng.role_present for Member
2018-05-09 23:22:33,433 [salt.state       ][INFO    ][22303] Role "Member" already exists
2018-05-09 23:22:33,434 [salt.state       ][INFO    ][22303] Completed state [Member] at time 23:22:33.434854 duration_in_ms=112.028
2018-05-09 23:22:33,436 [salt.state       ][INFO    ][22303] Running state [image_manager] at time 23:22:33.436535
2018-05-09 23:22:33,437 [salt.state       ][INFO    ][22303] Executing state keystoneng.role_present for image_manager
2018-05-09 23:22:33,472 [salt.state       ][INFO    ][22303] Role "image_manager" already exists
2018-05-09 23:22:33,472 [salt.state       ][INFO    ][22303] Completed state [image_manager] at time 23:22:33.472914 duration_in_ms=36.377
2018-05-09 23:22:33,475 [salt.state       ][INFO    ][22303] Running state [admin] at time 23:22:33.475837
2018-05-09 23:22:33,476 [salt.state       ][INFO    ][22303] Executing state keystoneng.user_present for admin
2018-05-09 23:22:34,034 [salt.state       ][INFO    ][22303] {'roles': ['"_member_" role removed for user "admin" under "admin" tenant']}
2018-05-09 23:22:34,035 [salt.state       ][INFO    ][22303] Completed state [admin] at time 23:22:34.035243 duration_in_ms=559.406
2018-05-09 23:22:34,039 [salt.minion      ][INFO    ][22303] Returning information for job: 20180509232216538451
2018-05-09 23:22:34,743 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232234718961
2018-05-09 23:22:34,763 [salt.minion      ][INFO    ][22419] Starting a new job with PID 22419
2018-05-09 23:22:35,455 [salt.state       ][INFO    ][22419] Loading fresh modules for state activity
2018-05-09 23:22:35,508 [salt.fileclient  ][INFO    ][22419] Fetching file from saltenv 'base', ** done ** 'keystone/client/init.sls'
2018-05-09 23:22:35,537 [salt.fileclient  ][INFO    ][22419] Fetching file from saltenv 'base', ** done ** 'keystone/client/service.sls'
2018-05-09 23:22:35,606 [salt.fileclient  ][INFO    ][22419] Fetching file from saltenv 'base', ** done ** 'keystone/client/project.sls'
2018-05-09 23:22:35,706 [salt.fileclient  ][INFO    ][22419] Fetching file from saltenv 'base', ** done ** 'keystone/client/server.sls'
2018-05-09 23:22:35,951 [salt.fileclient  ][INFO    ][22419] Fetching file from saltenv 'base', ** done ** 'keystone/client/os_client_config.sls'
2018-05-09 23:22:36,039 [salt.fileclient  ][INFO    ][22419] Fetching file from saltenv 'base', ** done ** 'keystone/client/resources/init.sls'
2018-05-09 23:22:36,061 [salt.fileclient  ][INFO    ][22419] Fetching file from saltenv 'base', ** done ** 'keystone/client/resources/v3.sls'
2018-05-09 23:22:37,142 [salt.state       ][INFO    ][22419] Running state [python-keystoneclient] at time 23:22:37.142902
2018-05-09 23:22:37,143 [salt.state       ][INFO    ][22419] Executing state pkg.installed for python-keystoneclient
2018-05-09 23:22:37,144 [salt.loaded.int.module.cmdmod][INFO    ][22419] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:22:37,539 [salt.state       ][INFO    ][22419] All specified packages are already installed
2018-05-09 23:22:37,540 [salt.state       ][INFO    ][22419] Completed state [python-keystoneclient] at time 23:22:37.540162 duration_in_ms=397.261
2018-05-09 23:22:37,540 [salt.state       ][INFO    ][22419] Running state [python-openstackclient] at time 23:22:37.540724
2018-05-09 23:22:37,541 [salt.state       ][INFO    ][22419] Executing state pkg.installed for python-openstackclient
2018-05-09 23:22:37,548 [salt.state       ][INFO    ][22419] All specified packages are already installed
2018-05-09 23:22:37,548 [salt.state       ][INFO    ][22419] Completed state [python-openstackclient] at time 23:22:37.548926 duration_in_ms=8.202
2018-05-09 23:22:37,550 [salt.state       ][INFO    ][22419] Running state [heat_stack_user] at time 23:22:37.550799
2018-05-09 23:22:37,551 [salt.state       ][INFO    ][22419] Executing state keystoneng.role_present for heat_stack_user
2018-05-09 23:22:37,712 [salt.state       ][INFO    ][22419] {'Role': 'Created'}
2018-05-09 23:22:37,712 [salt.state       ][INFO    ][22419] Completed state [heat_stack_user] at time 23:22:37.712868 duration_in_ms=162.068
2018-05-09 23:22:37,713 [salt.state       ][INFO    ][22419] Running state [heat_stack_owner] at time 23:22:37.713165
2018-05-09 23:22:37,713 [salt.state       ][INFO    ][22419] Executing state keystoneng.role_present for heat_stack_owner
2018-05-09 23:22:37,803 [salt.state       ][INFO    ][22419] {'Role': 'Created'}
2018-05-09 23:22:37,803 [salt.state       ][INFO    ][22419] Completed state [heat_stack_owner] at time 23:22:37.803615 duration_in_ms=90.45
2018-05-09 23:22:37,803 [salt.state       ][INFO    ][22419] Running state [admin] at time 23:22:37.803873
2018-05-09 23:22:37,804 [salt.state       ][INFO    ][22419] Executing state keystoneng.role_present for admin
2018-05-09 23:22:37,831 [salt.state       ][INFO    ][22419] Role "admin" already exists
2018-05-09 23:22:37,831 [salt.state       ][INFO    ][22419] Completed state [admin] at time 23:22:37.831355 duration_in_ms=27.482
2018-05-09 23:22:37,831 [salt.state       ][INFO    ][22419] Running state [Member] at time 23:22:37.831625
2018-05-09 23:22:37,831 [salt.state       ][INFO    ][22419] Executing state keystoneng.role_present for Member
2018-05-09 23:22:37,856 [salt.state       ][INFO    ][22419] Role "Member" already exists
2018-05-09 23:22:37,856 [salt.state       ][INFO    ][22419] Completed state [Member] at time 23:22:37.856618 duration_in_ms=24.993
2018-05-09 23:22:37,856 [salt.state       ][INFO    ][22419] Running state [heat-cfn] at time 23:22:37.856851
2018-05-09 23:22:37,857 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for heat-cfn
2018-05-09 23:22:37,919 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:37,919 [salt.state       ][INFO    ][22419] Completed state [heat-cfn] at time 23:22:37.919477 duration_in_ms=62.625
2018-05-09 23:22:37,920 [salt.state       ][INFO    ][22419] Running state [heat-cfn] at time 23:22:37.920375
2018-05-09 23:22:37,920 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for heat-cfn
2018-05-09 23:22:38,098 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:8000/v1', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:8000/v1', 'id': u'c654388cf65f4a35a03c66c86614b5bf', 'service_id': u'dd3667857096481ba3f678f709e744aa', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:8000/v1'}
2018-05-09 23:22:38,098 [salt.state       ][INFO    ][22419] Completed state [heat-cfn] at time 23:22:38.098738 duration_in_ms=178.362
2018-05-09 23:22:38,099 [salt.state       ][INFO    ][22419] Running state [ceilometer] at time 23:22:38.099370
2018-05-09 23:22:38,099 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for ceilometer
2018-05-09 23:22:38,221 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:38,221 [salt.state       ][INFO    ][22419] Completed state [ceilometer] at time 23:22:38.221611 duration_in_ms=122.24
2018-05-09 23:22:38,222 [salt.state       ][INFO    ][22419] Running state [ceilometer] at time 23:22:38.222575
2018-05-09 23:22:38,222 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for ceilometer
2018-05-09 23:22:38,385 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:8777/', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:8777/', 'id': u'727be4a9f3134e40b981105679fd5405', 'service_id': u'f64ddc1e47004bf9b3b8fcc8267dcfff', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:8777/'}
2018-05-09 23:22:38,385 [salt.state       ][INFO    ][22419] Completed state [ceilometer] at time 23:22:38.385812 duration_in_ms=163.236
2018-05-09 23:22:38,386 [salt.state       ][INFO    ][22419] Running state [glare] at time 23:22:38.386059
2018-05-09 23:22:38,386 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for glare
2018-05-09 23:22:38,444 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:38,445 [salt.state       ][INFO    ][22419] Completed state [glare] at time 23:22:38.444977 duration_in_ms=58.918
2018-05-09 23:22:38,445 [salt.state       ][INFO    ][22419] Running state [glare] at time 23:22:38.445782
2018-05-09 23:22:38,446 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for glare
2018-05-09 23:22:38,670 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:9494', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:9494', 'id': u'12d239be01b846b2a5a48992c1e3de21', 'service_id': u'aabec4253dac4937b434b000602d461b', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:9494'}
2018-05-09 23:22:38,670 [salt.state       ][INFO    ][22419] Completed state [glare] at time 23:22:38.670850 duration_in_ms=225.067
2018-05-09 23:22:38,671 [salt.state       ][INFO    ][22419] Running state [aodh] at time 23:22:38.671139
2018-05-09 23:22:38,671 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for aodh
2018-05-09 23:22:38,727 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:38,728 [salt.state       ][INFO    ][22419] Completed state [aodh] at time 23:22:38.728251 duration_in_ms=57.111
2018-05-09 23:22:38,729 [salt.state       ][INFO    ][22419] Running state [aodh] at time 23:22:38.729270
2018-05-09 23:22:38,729 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for aodh
2018-05-09 23:22:38,891 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:8042/', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:8042/', 'id': u'44d82242bbd74b7e8be13f02b77df4d1', 'service_id': u'afa620a7eea345c5b28f81d5d4f459a3', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:8042/'}
2018-05-09 23:22:38,891 [salt.state       ][INFO    ][22419] Completed state [aodh] at time 23:22:38.891597 duration_in_ms=162.327
2018-05-09 23:22:38,891 [salt.state       ][INFO    ][22419] Running state [nova20] at time 23:22:38.891869
2018-05-09 23:22:38,892 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for nova20
2018-05-09 23:22:38,951 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:38,951 [salt.state       ][INFO    ][22419] Completed state [nova20] at time 23:22:38.951445 duration_in_ms=59.575
2018-05-09 23:22:38,952 [salt.state       ][INFO    ][22419] Running state [nova20] at time 23:22:38.952705
2018-05-09 23:22:38,953 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for nova20
2018-05-09 23:22:39,125 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:8774/v2/$(project_id)s', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:8774/v2/$(project_id)s', 'id': u'6025af0415514e18b66c30a227b3a3d9', 'service_id': u'a2ed810d32714a04934e85c92044ce3c', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:8774/v2/$(project_id)s'}
2018-05-09 23:22:39,126 [salt.state       ][INFO    ][22419] Completed state [nova20] at time 23:22:39.126076 duration_in_ms=173.384
2018-05-09 23:22:39,126 [salt.state       ][INFO    ][22419] Running state [nova] at time 23:22:39.126476
2018-05-09 23:22:39,126 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for nova
2018-05-09 23:22:39,189 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:39,189 [salt.state       ][INFO    ][22419] Completed state [nova] at time 23:22:39.189273 duration_in_ms=62.797
2018-05-09 23:22:39,190 [salt.state       ][INFO    ][22419] Running state [nova] at time 23:22:39.190400
2018-05-09 23:22:39,190 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for nova
2018-05-09 23:22:39,359 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:8774/v2.1/$(project_id)s', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:8774/v2.1/$(project_id)s', 'id': u'326d7784a1fb4c2f8c0e14c1de05dfc4', 'service_id': u'49a12ff6a407498a81cb673d72a8f07a', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:8774/v2.1/$(project_id)s'}
2018-05-09 23:22:39,359 [salt.state       ][INFO    ][22419] Completed state [nova] at time 23:22:39.359315 duration_in_ms=168.915
2018-05-09 23:22:39,359 [salt.state       ][INFO    ][22419] Running state [heat] at time 23:22:39.359621
2018-05-09 23:22:39,359 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for heat
2018-05-09 23:22:39,414 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:39,415 [salt.state       ][INFO    ][22419] Completed state [heat] at time 23:22:39.415224 duration_in_ms=55.602
2018-05-09 23:22:39,416 [salt.state       ][INFO    ][22419] Running state [heat] at time 23:22:39.416337
2018-05-09 23:22:39,416 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for heat
2018-05-09 23:22:39,579 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:8004/v1/%(project_id)s', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:8004/v1/%(project_id)s', 'id': u'da1a33e06e0f4bf3bf47e8c9cc8764df', 'service_id': u'64d8648c2d944613814306dd0da8b443', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:8004/v1/%(project_id)s'}
2018-05-09 23:22:39,580 [salt.state       ][INFO    ][22419] Completed state [heat] at time 23:22:39.580108 duration_in_ms=163.771
2018-05-09 23:22:39,580 [salt.state       ][INFO    ][22419] Running state [keystone] at time 23:22:39.580506
2018-05-09 23:22:39,580 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for keystone
2018-05-09 23:22:39,648 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:39,648 [salt.state       ][INFO    ][22419] Completed state [keystone] at time 23:22:39.648414 duration_in_ms=67.907
2018-05-09 23:22:39,650 [salt.state       ][INFO    ][22419] Running state [keystone] at time 23:22:39.650058
2018-05-09 23:22:39,651 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for keystone
2018-05-09 23:22:39,816 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:35357/v3', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:5000/v3', 'id': u'f9047dfd554e4a17b0128c3c98c73d49', 'service_id': u'd7278470d64b4ea588930d07a93a2c4d', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:5000/v3'}
2018-05-09 23:22:39,816 [salt.state       ][INFO    ][22419] Completed state [keystone] at time 23:22:39.816334 duration_in_ms=166.277
2018-05-09 23:22:39,816 [salt.state       ][INFO    ][22419] Running state [cinder] at time 23:22:39.816632
2018-05-09 23:22:39,816 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for cinder
2018-05-09 23:22:39,878 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:39,878 [salt.state       ][INFO    ][22419] Completed state [cinder] at time 23:22:39.878815 duration_in_ms=62.183
2018-05-09 23:22:39,880 [salt.state       ][INFO    ][22419] Running state [cinder] at time 23:22:39.880101
2018-05-09 23:22:39,880 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for cinder
2018-05-09 23:22:40,058 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:8776/v1/$(project_id)s', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:8776/v1/$(project_id)s', 'id': u'19f6882522ff4d72b4cf01ee3862985a', 'service_id': u'7f7662a4ef2245b3ac5594dd3ce96cc3', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:8776/v1/$(project_id)s'}
2018-05-09 23:22:40,059 [salt.state       ][INFO    ][22419] Completed state [cinder] at time 23:22:40.058994 duration_in_ms=178.892
2018-05-09 23:22:40,059 [salt.state       ][INFO    ][22419] Running state [placement] at time 23:22:40.059284
2018-05-09 23:22:40,059 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for placement
2018-05-09 23:22:40,135 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:40,135 [salt.state       ][INFO    ][22419] Completed state [placement] at time 23:22:40.135694 duration_in_ms=76.409
2018-05-09 23:22:40,137 [salt.state       ][INFO    ][22419] Running state [placement] at time 23:22:40.136982
2018-05-09 23:22:40,137 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for placement
2018-05-09 23:22:40,320 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:8778', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:8778', 'id': u'450f11fc80ba425f85b16c181c1170a9', 'service_id': u'230ebb66d5a84c159930ca6cf3127297', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:8778'}
2018-05-09 23:22:40,320 [salt.state       ][INFO    ][22419] Completed state [placement] at time 23:22:40.320407 duration_in_ms=183.425
2018-05-09 23:22:40,320 [salt.state       ][INFO    ][22419] Running state [cinderv3] at time 23:22:40.320750
2018-05-09 23:22:40,321 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for cinderv3
2018-05-09 23:22:40,388 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:40,388 [salt.state       ][INFO    ][22419] Completed state [cinderv3] at time 23:22:40.388899 duration_in_ms=68.149
2018-05-09 23:22:40,390 [salt.state       ][INFO    ][22419] Running state [cinderv3] at time 23:22:40.389945
2018-05-09 23:22:40,390 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for cinderv3
2018-05-09 23:22:40,591 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:8776/v3/$(project_id)s', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:8776/v3/$(project_id)s', 'id': u'972cd73565a54c59b85358ef0dd1bf06', 'service_id': u'ffac49c00f724eb8ac26e8ac68ed32b0', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:8776/v3/$(project_id)s'}
2018-05-09 23:22:40,592 [salt.state       ][INFO    ][22419] Completed state [cinderv3] at time 23:22:40.592224 duration_in_ms=202.279
2018-05-09 23:22:40,593 [salt.state       ][INFO    ][22419] Running state [cinderv2] at time 23:22:40.593171
2018-05-09 23:22:40,594 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for cinderv2
2018-05-09 23:22:40,665 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:40,665 [salt.state       ][INFO    ][22419] Completed state [cinderv2] at time 23:22:40.665496 duration_in_ms=72.325
2018-05-09 23:22:40,666 [salt.state       ][INFO    ][22419] Running state [cinderv2] at time 23:22:40.666455
2018-05-09 23:22:40,667 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for cinderv2
2018-05-09 23:22:40,852 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:8776/v2/$(project_id)s', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:8776/v2/$(project_id)s', 'id': u'c713ee0d34e84c32ae0b25968f5496f6', 'service_id': u'16b0b3d99cce436eb13c96476714bc57', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:8776/v2/$(project_id)s'}
2018-05-09 23:22:40,853 [salt.state       ][INFO    ][22419] Completed state [cinderv2] at time 23:22:40.853725 duration_in_ms=187.269
2018-05-09 23:22:40,854 [salt.state       ][INFO    ][22419] Running state [glance] at time 23:22:40.854534
2018-05-09 23:22:40,855 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for glance
2018-05-09 23:22:40,917 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:40,917 [salt.state       ][INFO    ][22419] Completed state [glance] at time 23:22:40.917319 duration_in_ms=62.785
2018-05-09 23:22:40,918 [salt.state       ][INFO    ][22419] Running state [glance] at time 23:22:40.918152
2018-05-09 23:22:40,919 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for glance
2018-05-09 23:22:41,091 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:9292', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:9292', 'id': u'2b3810c5ab0c4f1c964b5f497f5dcfe5', 'service_id': u'a236f3e939cf4ed4afc43d8c89888bd4', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:9292'}
2018-05-09 23:22:41,092 [salt.state       ][INFO    ][22419] Completed state [glance] at time 23:22:41.092212 duration_in_ms=174.06
2018-05-09 23:22:41,092 [salt.state       ][INFO    ][22419] Running state [neutron] at time 23:22:41.092726
2018-05-09 23:22:41,093 [salt.state       ][INFO    ][22419] Executing state keystoneng.service_present for neutron
2018-05-09 23:22:41,163 [salt.state       ][INFO    ][22419] {'Service': 'Created'}
2018-05-09 23:22:41,164 [salt.state       ][INFO    ][22419] Completed state [neutron] at time 23:22:41.164689 duration_in_ms=71.963
2018-05-09 23:22:41,165 [salt.state       ][INFO    ][22419] Running state [neutron] at time 23:22:41.165768
2018-05-09 23:22:41,166 [salt.state       ][INFO    ][22419] Executing state keystoneng.endpoint_present for neutron
2018-05-09 23:22:41,344 [salt.state       ][INFO    ][22419] {'NAME_ATTR': 'name', 'adminurl': u'http://172.16.10.36:9696/', 'region': u'RegionOne', 'enabled': True, 'internalurl': u'http://172.16.10.36:9696/', 'id': u'6acbcfe93c3b4443b0c0b5ff709f73cc', 'service_id': u'a8429c150c2144cd991bb82be9f4cb3f', 'HUMAN_ID': False, 'publicurl': u'http://10.16.0.107:9696/'}
2018-05-09 23:22:41,344 [salt.state       ][INFO    ][22419] Completed state [neutron] at time 23:22:41.344404 duration_in_ms=178.636
2018-05-09 23:22:41,344 [salt.state       ][INFO    ][22419] Running state [admin] at time 23:22:41.344805
2018-05-09 23:22:41,345 [salt.state       ][INFO    ][22419] Executing state keystoneng.tenant_present for admin
2018-05-09 23:22:41,460 [salt.state       ][INFO    ][22419] {'Description': 'Updated'}
2018-05-09 23:22:41,460 [salt.state       ][INFO    ][22419] Completed state [admin] at time 23:22:41.460686 duration_in_ms=115.882
2018-05-09 23:22:41,462 [salt.state       ][INFO    ][22419] Running state [admin] at time 23:22:41.462705
2018-05-09 23:22:41,463 [salt.state       ][INFO    ][22419] Executing state keystoneng.user_present for admin
2018-05-09 23:22:41,693 [salt.state       ][INFO    ][22419] User "admin" is already present
2018-05-09 23:22:41,694 [salt.state       ][INFO    ][22419] Completed state [admin] at time 23:22:41.694104 duration_in_ms=231.399
2018-05-09 23:22:41,695 [salt.state       ][INFO    ][22419] Running state [service] at time 23:22:41.695264
2018-05-09 23:22:41,696 [salt.state       ][INFO    ][22419] Executing state keystoneng.tenant_present for service
2018-05-09 23:22:41,818 [salt.state       ][INFO    ][22419] {'Description': 'Updated'}
2018-05-09 23:22:41,819 [salt.state       ][INFO    ][22419] Completed state [service] at time 23:22:41.819867 duration_in_ms=124.604
2018-05-09 23:22:41,821 [salt.state       ][INFO    ][22419] Running state [ceilometer] at time 23:22:41.821447
2018-05-09 23:22:41,821 [salt.state       ][INFO    ][22419] Executing state keystoneng.user_present for ceilometer
2018-05-09 23:22:42,551 [salt.state       ][INFO    ][22419] {'User': 'Created'}
2018-05-09 23:22:42,553 [salt.state       ][INFO    ][22419] Completed state [ceilometer] at time 23:22:42.552967 duration_in_ms=731.518
2018-05-09 23:22:42,555 [salt.state       ][INFO    ][22419] Running state [aodh] at time 23:22:42.555342
2018-05-09 23:22:42,556 [salt.state       ][INFO    ][22419] Executing state keystoneng.user_present for aodh
2018-05-09 23:22:43,275 [salt.state       ][INFO    ][22419] {'User': 'Created'}
2018-05-09 23:22:43,276 [salt.state       ][INFO    ][22419] Completed state [aodh] at time 23:22:43.276019 duration_in_ms=720.677
2018-05-09 23:22:43,278 [salt.state       ][INFO    ][22419] Running state [nova] at time 23:22:43.277964
2018-05-09 23:22:43,279 [salt.state       ][INFO    ][22419] Executing state keystoneng.user_present for nova
2018-05-09 23:22:43,993 [salt.state       ][INFO    ][22419] {'User': 'Created'}
2018-05-09 23:22:43,993 [salt.state       ][INFO    ][22419] Completed state [nova] at time 23:22:43.993372 duration_in_ms=715.409
2018-05-09 23:22:43,994 [salt.state       ][INFO    ][22419] Running state [heat] at time 23:22:43.994202
2018-05-09 23:22:43,994 [salt.state       ][INFO    ][22419] Executing state keystoneng.user_present for heat
2018-05-09 23:22:44,715 [salt.state       ][INFO    ][22419] {'User': 'Created'}
2018-05-09 23:22:44,716 [salt.state       ][INFO    ][22419] Completed state [heat] at time 23:22:44.716351 duration_in_ms=722.146
2018-05-09 23:22:44,718 [salt.state       ][INFO    ][22419] Running state [cinder] at time 23:22:44.718405
2018-05-09 23:22:44,719 [salt.state       ][INFO    ][22419] Executing state keystoneng.user_present for cinder
2018-05-09 23:22:44,853 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232244832004
2018-05-09 23:22:44,873 [salt.minion      ][INFO    ][22450] Starting a new job with PID 22450
2018-05-09 23:22:44,890 [salt.minion      ][INFO    ][22450] Returning information for job: 20180509232244832004
2018-05-09 23:22:45,404 [salt.state       ][INFO    ][22419] {'User': 'Created'}
2018-05-09 23:22:45,404 [salt.state       ][INFO    ][22419] Completed state [cinder] at time 23:22:45.404594 duration_in_ms=686.189
2018-05-09 23:22:45,405 [salt.state       ][INFO    ][22419] Running state [glance] at time 23:22:45.405645
2018-05-09 23:22:45,406 [salt.state       ][INFO    ][22419] Executing state keystoneng.user_present for glance
2018-05-09 23:22:46,089 [salt.state       ][INFO    ][22419] {'User': 'Created'}
2018-05-09 23:22:46,091 [salt.state       ][INFO    ][22419] Completed state [glance] at time 23:22:46.090915 duration_in_ms=685.269
2018-05-09 23:22:46,092 [salt.state       ][INFO    ][22419] Running state [neutron] at time 23:22:46.092796
2018-05-09 23:22:46,093 [salt.state       ][INFO    ][22419] Executing state keystoneng.user_present for neutron
2018-05-09 23:22:46,784 [salt.state       ][INFO    ][22419] {'User': 'Created'}
2018-05-09 23:22:46,785 [salt.state       ][INFO    ][22419] Completed state [neutron] at time 23:22:46.785868 duration_in_ms=693.071
2018-05-09 23:22:46,791 [salt.minion      ][INFO    ][22419] Returning information for job: 20180509232234718961
2018-05-09 23:22:47,547 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command cmd.run with jid 20180509232247525363
2018-05-09 23:22:47,569 [salt.minion      ][INFO    ][22457] Starting a new job with PID 22457
2018-05-09 23:22:47,581 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][22457] Executing command '. /root/keystonercv3; openstack service list' in directory '/root'
2018-05-09 23:22:50,298 [salt.minion      ][INFO    ][22457] Returning information for job: 20180509232247525363
2018-05-09 23:22:50,968 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232250946726
2018-05-09 23:22:50,986 [salt.minion      ][INFO    ][22470] Starting a new job with PID 22470
2018-05-09 23:22:53,380 [salt.state       ][INFO    ][22470] Loading fresh modules for state activity
2018-05-09 23:22:53,435 [salt.fileclient  ][INFO    ][22470] Fetching file from saltenv 'base', ** done ** 'glance/init.sls'
2018-05-09 23:22:53,467 [salt.fileclient  ][INFO    ][22470] Fetching file from saltenv 'base', ** done ** 'glance/server.sls'
2018-05-09 23:22:54,636 [salt.state       ][INFO    ][22470] Running state [glance] at time 23:22:54.636094
2018-05-09 23:22:54,637 [salt.state       ][INFO    ][22470] Executing state group.present for glance
2018-05-09 23:22:54,638 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['groupadd', '-g 302', '-r', 'glance'] in directory '/root'
2018-05-09 23:22:54,666 [salt.state       ][INFO    ][22470] {'passwd': 'x', 'gid': 302, 'name': 'glance', 'members': []}
2018-05-09 23:22:54,667 [salt.state       ][INFO    ][22470] Completed state [glance] at time 23:22:54.666898 duration_in_ms=30.803
2018-05-09 23:22:54,668 [salt.state       ][INFO    ][22470] Running state [glance] at time 23:22:54.668116
2018-05-09 23:22:54,669 [salt.state       ][INFO    ][22470] Executing state user.present for glance
2018-05-09 23:22:54,670 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['useradd', '-s', '/bin/false', '-u', '302', '-g', '302', '-m', '-d', '/var/lib/glance', '-r', 'glance'] in directory '/root'
2018-05-09 23:22:54,702 [salt.state       ][INFO    ][22470] {'shell': '/bin/false', 'workphone': '', 'uid': 302, 'passwd': 'x', 'roomnumber': '', 'groups': ['glance'], 'home': '/var/lib/glance', 'name': 'glance', 'gid': 302, 'fullname': '', 'homephone': ''}
2018-05-09 23:22:54,703 [salt.state       ][INFO    ][22470] Completed state [glance] at time 23:22:54.703248 duration_in_ms=35.132
2018-05-09 23:22:54,704 [salt.state       ][INFO    ][22470] Running state [glance] at time 23:22:54.704199
2018-05-09 23:22:54,705 [salt.state       ][INFO    ][22470] Executing state pkg.installed for glance
2018-05-09 23:22:54,705 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:22:55,126 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['apt-cache', '-q', 'policy', 'glance'] in directory '/root'
2018-05-09 23:22:55,218 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:22:57,354 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:22:57,390 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'glance'] in directory '/root'
2018-05-09 23:23:01,091 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232301063958
2018-05-09 23:23:01,107 [salt.minion      ][INFO    ][22918] Starting a new job with PID 22918
2018-05-09 23:23:01,125 [salt.minion      ][INFO    ][22918] Returning information for job: 20180509232301063958
2018-05-09 23:23:10,444 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:23:10,498 [salt.state       ][INFO    ][22470] Made the following changes:
'libblas.so.3' changed from 'absent' to '1'
'python-numpy-api10' changed from 'absent' to '1'
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'glance' changed from 'absent' to '2:15.0.1-0ubuntu1~cloud0'
'python2.7-numpy' changed from 'absent' to '1'
'glance-store-common' changed from 'absent' to '0.22.0-0ubuntu1~cloud0'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-f2py' changed from 'absent' to '1'
'python2.7-glance' changed from 'absent' to '1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-semantic-version' changed from 'absent' to '2.3.1-1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'glance-common' changed from 'absent' to '2:15.0.1-0ubuntu1~cloud0'
'python-glance-store' changed from 'absent' to '0.22.0-0ubuntu1~cloud0'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-swiftclient' changed from 'absent' to '1:3.4.0-0ubuntu1~cloud0'
'python-numpy-dev' changed from 'absent' to '1'
'python-taskflow' changed from 'absent' to '2.14.0-0ubuntu1~cloud0'
'liblapack.so.3' changed from 'absent' to '1'
'python-automaton' changed from 'absent' to '1.2.0-1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-cursive' changed from 'absent' to '0.1.1-1ubuntu1~cloud0'
'python-httplib2' changed from 'absent' to '0.9.1+dfsg-1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-glance' changed from 'absent' to '2:15.0.1-0ubuntu1~cloud0'
'python-barbicanclient' changed from 'absent' to '4.0.1-2'
'python-castellan' changed from 'absent' to '0.12.0-0ubuntu1~cloud0'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'glance-api' changed from 'absent' to '2:15.0.1-0ubuntu1~cloud0'
'python-networkx' changed from 'absent' to '1.11-1ubuntu1'
'glance-registry' changed from 'absent' to '2:15.0.1-0ubuntu1~cloud0'

2018-05-09 23:23:10,527 [salt.state       ][INFO    ][22470] Loading fresh modules for state activity
2018-05-09 23:23:10,559 [salt.state       ][INFO    ][22470] Completed state [glance] at time 23:23:10.559167 duration_in_ms=15854.969
2018-05-09 23:23:10,570 [salt.state       ][INFO    ][22470] Running state [glance-api] at time 23:23:10.570804
2018-05-09 23:23:10,571 [salt.state       ][INFO    ][22470] Executing state pkg.installed for glance-api
2018-05-09 23:23:10,970 [salt.state       ][INFO    ][22470] All specified packages are already installed
2018-05-09 23:23:10,971 [salt.state       ][INFO    ][22470] Completed state [glance-api] at time 23:23:10.971511 duration_in_ms=400.706
2018-05-09 23:23:10,972 [salt.state       ][INFO    ][22470] Running state [glance-registry] at time 23:23:10.972278
2018-05-09 23:23:10,973 [salt.state       ][INFO    ][22470] Executing state pkg.installed for glance-registry
2018-05-09 23:23:10,981 [salt.state       ][INFO    ][22470] All specified packages are already installed
2018-05-09 23:23:10,981 [salt.state       ][INFO    ][22470] Completed state [glance-registry] at time 23:23:10.981412 duration_in_ms=9.134
2018-05-09 23:23:10,982 [salt.state       ][INFO    ][22470] Running state [glance-common] at time 23:23:10.982105
2018-05-09 23:23:10,982 [salt.state       ][INFO    ][22470] Executing state pkg.installed for glance-common
2018-05-09 23:23:10,989 [salt.state       ][INFO    ][22470] All specified packages are already installed
2018-05-09 23:23:10,989 [salt.state       ][INFO    ][22470] Completed state [glance-common] at time 23:23:10.989850 duration_in_ms=7.744
2018-05-09 23:23:10,990 [salt.state       ][INFO    ][22470] Running state [python-glance] at time 23:23:10.990551
2018-05-09 23:23:10,991 [salt.state       ][INFO    ][22470] Executing state pkg.installed for python-glance
2018-05-09 23:23:10,998 [salt.state       ][INFO    ][22470] All specified packages are already installed
2018-05-09 23:23:10,999 [salt.state       ][INFO    ][22470] Completed state [python-glance] at time 23:23:10.999180 duration_in_ms=8.629
2018-05-09 23:23:10,999 [salt.state       ][INFO    ][22470] Running state [python-glance-store] at time 23:23:10.999866
2018-05-09 23:23:11,000 [salt.state       ][INFO    ][22470] Executing state pkg.installed for python-glance-store
2018-05-09 23:23:11,007 [salt.state       ][INFO    ][22470] All specified packages are already installed
2018-05-09 23:23:11,007 [salt.state       ][INFO    ][22470] Completed state [python-glance-store] at time 23:23:11.007680 duration_in_ms=7.814
2018-05-09 23:23:11,008 [salt.state       ][INFO    ][22470] Running state [python-glanceclient] at time 23:23:11.008349
2018-05-09 23:23:11,009 [salt.state       ][INFO    ][22470] Executing state pkg.installed for python-glanceclient
2018-05-09 23:23:11,015 [salt.state       ][INFO    ][22470] All specified packages are already installed
2018-05-09 23:23:11,016 [salt.state       ][INFO    ][22470] Completed state [python-glanceclient] at time 23:23:11.016336 duration_in_ms=7.987
2018-05-09 23:23:11,017 [salt.state       ][INFO    ][22470] Running state [gettext-base] at time 23:23:11.017058
2018-05-09 23:23:11,017 [salt.state       ][INFO    ][22470] Executing state pkg.installed for gettext-base
2018-05-09 23:23:11,025 [salt.state       ][INFO    ][22470] All specified packages are already installed
2018-05-09 23:23:11,025 [salt.state       ][INFO    ][22470] Completed state [gettext-base] at time 23:23:11.025534 duration_in_ms=8.477
2018-05-09 23:23:11,026 [salt.state       ][INFO    ][22470] Running state [python-memcache] at time 23:23:11.026205
2018-05-09 23:23:11,026 [salt.state       ][INFO    ][22470] Executing state pkg.installed for python-memcache
2018-05-09 23:23:11,033 [salt.state       ][INFO    ][22470] All specified packages are already installed
2018-05-09 23:23:11,034 [salt.state       ][INFO    ][22470] Completed state [python-memcache] at time 23:23:11.034393 duration_in_ms=8.188
2018-05-09 23:23:11,035 [salt.state       ][INFO    ][22470] Running state [python-pycadf] at time 23:23:11.035072
2018-05-09 23:23:11,035 [salt.state       ][INFO    ][22470] Executing state pkg.installed for python-pycadf
2018-05-09 23:23:11,042 [salt.state       ][INFO    ][22470] All specified packages are already installed
2018-05-09 23:23:11,043 [salt.state       ][INFO    ][22470] Completed state [python-pycadf] at time 23:23:11.043348 duration_in_ms=8.276
2018-05-09 23:23:11,046 [salt.state       ][INFO    ][22470] Running state [/etc/glance/glance-cache.conf] at time 23:23:11.046079
2018-05-09 23:23:11,046 [salt.state       ][INFO    ][22470] Executing state file.managed for /etc/glance/glance-cache.conf
2018-05-09 23:23:11,077 [salt.fileclient  ][INFO    ][22470] Fetching file from saltenv 'base', ** done ** 'glance/files/pike/glance-cache.conf.Debian'
2018-05-09 23:23:11,160 [salt.state       ][INFO    ][22470] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -226,8 +227,8 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
+# Reason: This option will be removed in the Ocata release because the same
+# functionality can be achieved with greater granularity by using policies.
 # Please see the Newton release notes for more information.
 #show_multiple_locations = false
 
@@ -409,7 +410,7 @@
 # Related options:
 #     * None
 #
-#  (unknown value)
+#  (string value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -473,56 +474,6 @@
 #
 #  (string value)
 #digest_algorithm = sha256
-
-#
-# The URL provides location where the temporary data will be stored
-#
-# This option is for Glance internal use only. Glance will save the
-# image data uploaded by the user to 'staging' endpoint during the
-# image import process.
-#
-# This option does not change the 'staging' API endpoint by any means.
-#
-# NOTE: It is discouraged to use same path as [task]/work_dir
-#
-# NOTE: 'file://<absolute-directory-path>' is the only option
-# api_image_import flow will support for now.
-#
-# NOTE: The staging path must be on shared filesystem available to all
-# Glance API nodes.
-#
-# Possible values:
-#     * String starting with 'file://' followed by absolute FS path
-#
-# Related options:
-#     * [task]/work_dir
-#     * [DEFAULT]/enable_image_import (*deprecated*)
-#
-#  (string value)
-#node_staging_uri = file:///tmp/staging/
-
-# DEPRECATED:
-# Enables the Image Import workflow introduced in Pike
-#
-# As '[DEFAULT]/node_staging_uri' is required for the Image
-# Import, it's disabled per default in Pike, enabled per
-# default in Queens and removed in Rocky. This allows Glance to
-# operate with previous version configs upon upgrade.
-#
-# Setting this option to True will enable the endpoints related
-# to Image Import Refactoring work.
-#
-# Related options:
-#     * [DEFUALT]/node_staging_uri (boolean value)
-# This option is deprecated for removal since Pike.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated for removal in Rocky.
-#
-# It was introduced to make sure that the API is not enabled
-# before the '[DEFAULT]/node_staging_uri' is defined and is
-# long term redundant.
-#enable_image_import = false
 
 #
 # The relative path to sqlite file database that will be used for image cache
@@ -604,6 +555,10 @@
 # Minimum value: 0
 #image_cache_max_size = 10737418240
 
+
+
+os_region_name = RegionOne
+
 #
 # The amount of time, in seconds, an incomplete image remains in the cache.
 #
@@ -661,6 +616,7 @@
 #
 #  (string value)
 #image_cache_dir = <None>
+#image_cache_dir = /var/lib/glance/image-cache/
 
 #
 # Address the registry server is hosted on.
@@ -671,8 +627,9 @@
 # Related options:
 #     * None
 #
-#  (unknown value)
+#  (string value)
 #registry_host = 0.0.0.0
+registry_host = 172.16.10.36
 
 #
 # Port the registry server is listening on.
@@ -687,6 +644,7 @@
 # Minimum value: 0
 # Maximum value: 65535
 #registry_port = 9191
+registry_port = 9191
 
 #
 # Protocol to use for communication with the registry server.
@@ -909,6 +867,12 @@
 # Note: This option can be changed without restarting.
 #debug = false
 
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
 # files, see the Python logging module documentation. Note that when logging
@@ -929,6 +893,7 @@
 # log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
+log_file = /var/log/glance/image-cache.log
 
 # (Optional) The base directory used for relative log_file  paths. This option
 # is ignored if log_config_append is set. (string value)
@@ -947,19 +912,13 @@
 # set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
 # Log output to standard error. This option is ignored if log_config_append is
 # set. (boolean value)
-#use_stderr = false
+#use_stderr = true
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
@@ -981,7 +940,7 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -992,18 +951,6 @@
 # The format for an instance UUID that is passed with the log message. (string
 # value)
 #instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
@@ -1090,7 +1037,7 @@
 # /store-capabilities.html
 #
 # For more information on setting up a particular store in your
-# deployment and help with the usage of this feature, please contact
+# deplyment and help with the usage of this feature, please contact
 # the storage driver maintainers listed here:
 # http://docs.openstack.org/developer/glance_store/drivers/index.html
 #
@@ -1119,8 +1066,8 @@
 #
 # Possible values:
 #     * A string of of the following form:
-#       ``<service_type>:<service_name>:<interface>``
-#       At least ``service_type`` and ``interface`` should be specified.
+#       ``<service_type>:<service_name>:<endpoint_type>``
+#       At least ``service_type`` and ``endpoint_type`` should be specified.
 #       ``service_name`` can be omitted.
 #
 # Related options:
@@ -1343,25 +1290,6 @@
 #
 #  (string value)
 #rootwrap_config = /etc/glance/rootwrap.conf
-
-#
-# Volume type that will be used for volume creation in cinder.
-#
-# Some cinder backends can have several volume types to optimize storage usage.
-# Adding this option allows an operator to choose a specific volume type
-# in cinder that can be optimized for images.
-#
-# If this is not set, then the default volume type specified in the cinder
-# configuration will be used for volume creation.
-#
-# Possible values:
-#     * A valid volume type from cinder
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#cinder_volume_type = <None>
 
 #
 # Directory to which the filesystem backend store writes images.
@@ -1442,7 +1370,6 @@
 #     * None
 #
 #  (string value)
-#filesystem_store_metadata_file = <None>
 
 #
 # File access permissions for the image files.
@@ -1699,7 +1626,7 @@
 # Related Options:
 #     * sheepdog_store_port
 #
-#  (unknown value)
+#  (string value)
 #sheepdog_store_address = 127.0.0.1
 
 #
@@ -1944,16 +1871,12 @@
 # images in its own account. More details multi-tenant store can be found at
 # https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
 #
-# NOTE: If using multi-tenant swift store, please make sure
-# that you do not set a swift configuration file with the
-# 'swift_store_config_file' option.
-#
 # Possible values:
 #     * True
 #     * False
 #
 # Related options:
-#     * swift_store_config_file
+#     * None
 #
 #  (boolean value)
 #swift_store_multi_tenant = false
@@ -2169,15 +2092,12 @@
 # option is highly recommended while using Swift storage backend for
 # image storage as it avoids storage of credentials in the database.
 #
-# NOTE: Please do not configure this option if you have set
-# ``swift_store_multi_tenant`` to ``True``.
-#
 # Possible values:
 #     * String value representing an absolute path on the glance-api
 #       node
 #
 # Related options:
-#     * swift_store_multi_tenant
+#     * None
 #
 #  (string value)
 #swift_store_config_file = <None>
@@ -2198,7 +2118,7 @@
 #     * vmware_server_username
 #     * vmware_server_password
 #
-#  (unknown value)
+#  (string value)
 #vmware_server_host = 127.0.0.1
 
 #
@@ -2360,6 +2280,9 @@
 #  (multi valued)
 #vmware_datastores =
 
+os_region_name = RegionOne
+
+
 
 [oslo_policy]
 
@@ -2367,10 +2290,12 @@
 # From oslo.policy
 #
 
-# The file that defines policies. (string value)
+# The JSON file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
 #policy_file = policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
 #policy_default_rule = default
 
 # Directories where policy configuration files are stored. They can be relative
@@ -2378,4 +2303,5 @@
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
 #policy_dirs = policy.d

2018-05-09 23:23:11,162 [salt.state       ][INFO    ][22470] Completed state [/etc/glance/glance-cache.conf] at time 23:23:11.162774 duration_in_ms=116.693
2018-05-09 23:23:11,163 [salt.state       ][INFO    ][22470] Running state [/etc/glance/glance-registry.conf] at time 23:23:11.163875
2018-05-09 23:23:11,164 [salt.state       ][INFO    ][22470] Executing state file.managed for /etc/glance/glance-registry.conf
2018-05-09 23:23:11,190 [salt.fileclient  ][INFO    ][22470] Fetching file from saltenv 'base', ** done ** 'glance/files/pike/glance-registry.conf.Debian'
2018-05-09 23:23:11,303 [salt.state       ][INFO    ][22470] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -212,6 +213,7 @@
 #  (integer value)
 # Minimum value: 1
 #limit_param_default = 25
+limit_param_default = 25
 
 #
 # Maximum number of results that could be returned by a request.
@@ -237,6 +239,7 @@
 #  (integer value)
 # Minimum value: 1
 #api_limit_max = 1000
+api_limit_max = 1000
 
 #
 # Show direct image location when returning an image.
@@ -300,8 +303,8 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
+# Reason: This option will be removed in the Ocata release because the same
+# functionality can be achieved with greater granularity by using policies.
 # Please see the Newton release notes for more information.
 #show_multiple_locations = false
 
@@ -483,7 +486,7 @@
 # Related options:
 #     * None
 #
-#  (unknown value)
+#  (string value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -549,56 +552,6 @@
 #digest_algorithm = sha256
 
 #
-# The URL provides location where the temporary data will be stored
-#
-# This option is for Glance internal use only. Glance will save the
-# image data uploaded by the user to 'staging' endpoint during the
-# image import process.
-#
-# This option does not change the 'staging' API endpoint by any means.
-#
-# NOTE: It is discouraged to use same path as [task]/work_dir
-#
-# NOTE: 'file://<absolute-directory-path>' is the only option
-# api_image_import flow will support for now.
-#
-# NOTE: The staging path must be on shared filesystem available to all
-# Glance API nodes.
-#
-# Possible values:
-#     * String starting with 'file://' followed by absolute FS path
-#
-# Related options:
-#     * [task]/work_dir
-#     * [DEFAULT]/enable_image_import (*deprecated*)
-#
-#  (string value)
-#node_staging_uri = file:///tmp/staging/
-
-# DEPRECATED:
-# Enables the Image Import workflow introduced in Pike
-#
-# As '[DEFAULT]/node_staging_uri' is required for the Image
-# Import, it's disabled per default in Pike, enabled per
-# default in Queens and removed in Rocky. This allows Glance to
-# operate with previous version configs upon upgrade.
-#
-# Setting this option to True will enable the endpoints related
-# to Image Import Refactoring work.
-#
-# Related options:
-#     * [DEFUALT]/node_staging_uri (boolean value)
-# This option is deprecated for removal since Pike.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated for removal in Rocky.
-#
-# It was introduced to make sure that the API is not enabled
-# before the '[DEFAULT]/node_staging_uri' is defined and is
-# long term redundant.
-#enable_image_import = false
-
-#
 # IP address to bind the glance servers to.
 #
 # Provide an IP address to bind the glance server to. The default
@@ -615,8 +568,9 @@
 # Related options:
 #     * None
 #
-#  (unknown value)
+#  (string value)
 #bind_host = 0.0.0.0
+bind_host = 172.16.10.36
 
 #
 # Port number on which the server will listen.
@@ -636,6 +590,7 @@
 # Minimum value: 0
 # Maximum value: 65535
 #bind_port = <None>
+bind_port = 9191
 
 #
 # Set the number of incoming connection requests.
@@ -767,6 +722,7 @@
 #  (integer value)
 # Minimum value: 0
 #workers = <None>
+workers = 1
 
 #
 # Maximum line size of message headers.
@@ -845,6 +801,14 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -866,6 +830,7 @@
 # log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
+log_file = /var/log/glance/registry.log
 
 # (Optional) The base directory used for relative log_file  paths. This option
 # is ignored if log_config_append is set. (string value)
@@ -884,19 +849,13 @@
 # set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
 # Log output to standard error. This option is ignored if log_config_append is
 # set. (boolean value)
-#use_stderr = false
+#use_stderr = true
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
@@ -918,7 +877,7 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -930,18 +889,6 @@
 # value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
@@ -950,6 +897,7 @@
 #
 
 # Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
 #rpc_conn_pool_size = 30
 
 # The pool size limit for connections expiration policy (integer value)
@@ -960,144 +908,93 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
-# Allowed values: redis, sentinel, dummy
+# Allowed values: redis, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
+# Seconds to wait before a cast expires (TTL). The default value of -1 specifies
+# an infinite linger period. The value of 0 specifies no linger period. Pending
+# messages shall be discarded immediately when the socket is closed. Only
+# supported by impl_zmq. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
+#rpc_cast_timeout = -1
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target (
 # < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
-#use_pub_sub = false
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = true
 
 # Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = true
 
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
 # a queue when server side disconnects. False means to keep queue and messages
 # even if server is disconnected, when the server appears we send all
 # accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+#zmq_immediate = false
+
+# Size of executor thread pool. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
@@ -1107,6 +1004,7 @@
 # A URL representing the messaging driver to use and its full configuration.
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -1118,6 +1016,7 @@
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
 #control_exchange = openstack
+control_exchange = openstack
 
 
 [database]
@@ -1126,12 +1025,22 @@
 # From oslo.db
 #
 
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect the
+# database.
+#sqlite_db = oslo.sqlite
+
 # If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
 #sqlite_synchronous = true
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
+backend = sqlalchemy
 
 # The SQLAlchemy connection string to use to connect to the database. (string
 # value)
@@ -1139,6 +1048,7 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
+connection = mysql+pymysql://glance:opnfv_secret@172.16.10.36/glance
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
@@ -1150,15 +1060,12 @@
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
 # Timeout before idle SQL connections are reaped. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #idle_timeout = 3600
+idle_timeout = 3600
 
 # Minimum number of SQL connections to keep open in a pool. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
@@ -1170,12 +1077,14 @@
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 10
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -1186,6 +1095,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -1230,20 +1140,46 @@
 # Deprecated group/name - [DEFAULT]/dbapi_use_tpool
 #use_tpool = false
 
+[glance_store]
+filesystem_store_datadir = /var/lib/glance/images/
+
+swift_store_endpoint_type = internalURL
+
+cinder_catalog_info = volumev2::internalURL
+
+# Override service catalog lookup with template for cinder endpoint
+# e.g. http://localhost:8776/v2/%(tenant)s (string value)
+#cinder_endpoint_template = <None>
+
+# Region name of this node. If specified, it will be used to locate
+# OpenStack services for stores. (string value)
+# Deprecated group/name - [DEFAULT]/os_region_name
+#cinder_os_region_name = <None>
+
+cinder_os_region_name = RegionOne
+
 
 [keystone_authtoken]
 
 #
 # From keystonemiddleware.auth_token
 #
-
+revocation_cache_time = 10
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = glance
+password = opnfv_secret
+auth_uri=http://172.16.10.36:5000
+auth_url=http://172.16.10.36:35357
 # Complete "public" Identity API endpoint. This endpoint should not be an
 # "admin" endpoint, as it should be accessible by all end users. Unauthenticated
 # clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# endpoint should  ideally be unversioned, client support in the wild varies.
+# If you're using a versioned v2 endpoint here, then this  should *not* be the
+# same endpoint the service user utilizes  for validating tokens, because normal
+# end users may not be  able to reach that endpoint. (string value)
 #auth_uri = <None>
 
 # API version of the admin Identity API endpoint. (string value)
@@ -1283,12 +1219,7 @@
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
 
-# DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P release.
-# (string value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
+# Directory used to cache files related to PKI tokens. (string value)
 #signing_dir = <None>
 
 # Optionally specify a list of memcached server(s) to use for caching. If left
@@ -1301,14 +1232,10 @@
 # -1 to disable caching completely. (integer value)
 #token_cache_time = 300
 
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in the
-# Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
+# Determines the frequency at which the list of revoked tokens is retrieved from
+# the Identity service (in seconds). A high number of revocation events combined
+# with a low cache duration may significantly reduce performance. Only valid for
+# PKI tokens. (integer value)
 #revocation_cache_time = 10
 
 # (Optional) If defined, indicate whether token data should be authenticated or
@@ -1361,40 +1288,19 @@
 # value)
 #enforce_token_bind = permissive
 
-# DEPRECATED: If true, the revocation list will be checked for cached tokens.
-# This requires that PKI tokens are configured on the identity server. (boolean
-# value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
+# If true, the revocation list will be checked for cached tokens. This requires
+# that PKI tokens are configured on the identity server. (boolean value)
 #check_revocations_for_cached = false
 
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
-# single algorithm or multiple. The algorithms are those supported by Python
-# standard hashlib.new(). The hashes will be tried in the order given, so put
-# the preferred one first for performance. The result of the first hash will be
+# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm
+# or multiple. The algorithms are those supported by Python standard
+# hashlib.new(). The hashes will be tried in the order given, so put the
+# preferred one first for performance. The result of the first hash will be
 # stored in the cache. This will typically be set to multiple values only while
 # migrating from a less secure algorithm to a more secure one. Once all the old
 # tokens are expired this option should be set to a single value for better
 # performance. (list value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
 #hash_algorithms = md5
-
-# A choice of roles that must be present in a service token. Service tokens are
-# allowed to request that an expired token can be used and so this check should
-# tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present. For
-# backwards compatibility reasons this currently only affects the allow_expired
-# check. (list value)
-#service_token_roles = service
-
-# For backwards compatibility reasons we must let valid service tokens pass that
-# don't pass the service_token_roles check as valid. Setting this true will
-# become the default in a future release and should be enabled if possible.
-# (boolean value)
-#service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
@@ -1430,7 +1336,7 @@
 # Reason: Replaced by [DEFAULT]/transport_url
 #password =
 
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode) e.g.
 # [host:port, host1:port ... ] (list value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
@@ -1446,7 +1352,7 @@
 # Time in ms to wait before the transaction is killed. (integer value)
 #check_timeout = 20000
 
-# Timeout in ms on blocking socket operations. (integer value)
+# Timeout in ms on blocking socket operations (integer value)
 #socket_timeout = 10000
 
 
@@ -1458,60 +1364,55 @@
 
 # Name for the AMQP container. must be globally unique. Defaults to a generated
 # UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
 #container_name = <None>
 
 # Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
 #idle_timeout = 0
 
 # Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
 #trace = false
 
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string value)
+# CA certificate PEM file to verify server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
 #ssl_ca_file =
 
-# Self-identifying certificate PEM file for client authentication (string value)
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
 #ssl_cert_file =
 
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
-# value)
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
 #ssl_key_file =
 
 # Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
 #ssl_key_password = <None>
 
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
 #allow_insecure_clients = false
 
 # Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
 #sasl_mechanisms =
 
 # Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
 #sasl_config_dir =
 
 # Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
 #sasl_config_name =
 
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
 #username =
 
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
 #password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
@@ -1533,12 +1434,8 @@
 # Minimum value: 1
 #link_retry_delay = 10
 
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
+# The deadline for an rpc reply message delivery. Only used when caller does not
+# provide a timeout expiry. (integer value)
 # Minimum value: 5
 #default_reply_timeout = 30
 
@@ -1551,11 +1448,6 @@
 # does not provide a timeout expiry. (integer value)
 # Minimum value: 5
 #default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
 
 # Indicates the addressing mode used by the driver.
 # Permitted values:
@@ -1566,12 +1458,15 @@
 #addressing_mode = dynamic
 
 # address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
 #server_request_prefix = exclusive
 
 # address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
 #broadcast_prefix = broadcast
 
 # address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
 #group_request_prefix = unicast
 
 # Address prefix for all generated RPC addresses (string value)
@@ -1601,6 +1496,7 @@
 # else control_exchange if set
 # else 'notify' (string value)
 #default_notification_exchange = <None>
+default_notification_exchange = glance
 
 # Exchange name used in RPC addresses.
 # Exchange name resolution precedence:
@@ -1622,66 +1518,6 @@
 # Minimum value: 1
 #notify_server_credit = 100
 
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# Pool Size for Kafka Consumers (integer value)
-#pool_size = 10
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point
-# value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
 
 [oslo_messaging_notifications]
 
@@ -1693,7 +1529,7 @@
 # messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
-
+driver = messagingv2
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
 # Deprecated group/name - [DEFAULT]/notification_transport_url
@@ -1704,11 +1540,6 @@
 # Deprecated group/name - [DEFAULT]/notification_topics
 #topics = notifications
 
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
 
 [oslo_messaging_rabbit]
 
@@ -1722,31 +1553,30 @@
 #amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
 #amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
 
 # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
 # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
 # distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
 
 # SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
 
 # SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
 
 # SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
 #kombu_reconnect_delay = 1.0
 
 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
@@ -1766,6 +1596,7 @@
 
 # DEPRECATED: The RabbitMQ broker address where a single node is used. (string
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1774,34 +1605,43 @@
 # DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_port = 5672
 
 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_hosts = $rabbit_host:$rabbit_port
 
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
 # DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_userid = guest
 
 # DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_password = guest
 
 # The RabbitMQ login method. (string value)
-# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
 #rabbit_login_method = AMQPLAIN
 
 # DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1812,6 +1652,7 @@
 
 # How long to backoff for between retries when connecting to RabbitMQ. (integer
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
 #rabbit_retry_backoff = 2
 
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
@@ -1820,6 +1661,7 @@
 
 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
 # (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #rabbit_max_retries = 0
@@ -1827,9 +1669,10 @@
 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
 # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
 # is no longer controlled by the x-ha-policy argument when declaring a queue. If
-# you just want to make sure that all queues (except those with auto-generated
+# you just want to make sure that all queues (except  those with auto-generated
 # names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
 # '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
 #rabbit_ha_queues = false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
@@ -1852,6 +1695,7 @@
 #heartbeat_rate = 2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
 #fake_rabbit = false
 
 # Maximum number of channels to allow (integer value)
@@ -1862,6 +1706,9 @@
 
 # How often to send heartbeats for consumer's connections (integer value)
 #heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
 
 # Arguments passed to ssl.wrap_socket (dict value)
 #ssl_options = <None>
@@ -1899,207 +1746,152 @@
 # (integer value)
 #pool_stale = 60
 
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to notification
+# listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending reply.
+# -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending reply.
+# (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more then one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_messaging_zmq]
+
+#
+# From oslo.messaging
+#
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Seconds to wait before a cast expires (TTL). The default value of -1 specifies
+# an infinite linger period. The value of 0 specifies no linger period. Pending
+# messages shall be discarded immediately when the socket is closed. Only
+# supported by impl_zmq. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#rpc_cast_timeout = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target (
+# < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = true
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = true
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to notification
-# listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending reply.
-# -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending reply.
-# (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
 # a queue when server side disconnects. False means to keep queue and messages
 # even if server is disconnected, when the server appears we send all
 # accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
+#zmq_immediate = false
 
 
 [oslo_policy]
@@ -2108,10 +1900,13 @@
 # From oslo.policy
 #
 
-# The file that defines policies. (string value)
+# The JSON file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
 #policy_file = policy.json
+policy_file = /etc/glance/policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
 #policy_default_rule = default
 
 # Directories where policy configuration files are stored. They can be relative
@@ -2119,6 +1914,7 @@
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
 #policy_dirs = policy.d
 
 
@@ -2148,6 +1944,7 @@
 #
 #  (string value)
 #flavor = keystone
+flavor = keystone
 
 #
 # Name of the paste configuration file.
@@ -2239,39 +2036,5 @@
 # Examples of possible values:
 #
 # * messaging://: use oslo_messaging driver for sending notifications.
-# * mongodb://127.0.0.1:27017 : use mongodb driver for sending notifications.
-# * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for sending
-# notifications.
 #  (string value)
 #connection_string = messaging://
-
-#
-# Document type for notification indexing in elasticsearch.
-#  (string value)
-#es_doc_type = notification
-
-#
-# This parameter is a time value parameter (for example: es_scroll_time=2m),
-# indicating for how long the nodes that participate in the search will maintain
-# relevant resources in order to continue and support it.
-#  (string value)
-#es_scroll_time = 2m
-
-#
-# Elasticsearch splits large requests in batches. This parameter defines
-# maximum size of each batch (for example: es_scroll_size=10000).
-#  (integer value)
-#es_scroll_size = 10000
-
-#
-# Redissentinel provides a timeout option on the connections.
-# This parameter defines that timeout (for example: socket_timeout=0.1).
-#  (floating point value)
-#socket_timeout = 0.1
-
-#
-# Redissentinel uses a service name to identify a master redis service.
-# This parameter defines the name (for example:
-# sentinal_service_name=mymaster).
-#  (string value)
-#sentinel_service_name = mymaster

2018-05-09 23:23:11,304 [salt.state       ][INFO    ][22470] Completed state [/etc/glance/glance-registry.conf] at time 23:23:11.304397 duration_in_ms=140.523
2018-05-09 23:23:11,304 [salt.state       ][INFO    ][22470] Running state [/etc/glance/glance-scrubber.conf] at time 23:23:11.304859
2018-05-09 23:23:11,305 [salt.state       ][INFO    ][22470] Executing state file.managed for /etc/glance/glance-scrubber.conf
2018-05-09 23:23:11,305 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232311280339
2018-05-09 23:23:11,323 [salt.minion      ][INFO    ][23857] Starting a new job with PID 23857
2018-05-09 23:23:11,332 [salt.fileclient  ][INFO    ][22470] Fetching file from saltenv 'base', ** done ** 'glance/files/pike/glance-scrubber.conf.Debian'
2018-05-09 23:23:11,344 [salt.minion      ][INFO    ][23857] Returning information for job: 20180509232311280339
2018-05-09 23:23:11,404 [salt.state       ][INFO    ][22470] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -226,8 +227,8 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
+# Reason: This option will be removed in the Ocata release because the same
+# functionality can be achieved with greater granularity by using policies.
 # Please see the Newton release notes for more information.
 #show_multiple_locations = false
 
@@ -409,7 +410,7 @@
 # Related options:
 #     * None
 #
-#  (unknown value)
+#  (string value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -473,56 +474,6 @@
 #
 #  (string value)
 #digest_algorithm = sha256
-
-#
-# The URL provides location where the temporary data will be stored
-#
-# This option is for Glance internal use only. Glance will save the
-# image data uploaded by the user to 'staging' endpoint during the
-# image import process.
-#
-# This option does not change the 'staging' API endpoint by any means.
-#
-# NOTE: It is discouraged to use same path as [task]/work_dir
-#
-# NOTE: 'file://<absolute-directory-path>' is the only option
-# api_image_import flow will support for now.
-#
-# NOTE: The staging path must be on shared filesystem available to all
-# Glance API nodes.
-#
-# Possible values:
-#     * String starting with 'file://' followed by absolute FS path
-#
-# Related options:
-#     * [task]/work_dir
-#     * [DEFAULT]/enable_image_import (*deprecated*)
-#
-#  (string value)
-#node_staging_uri = file:///tmp/staging/
-
-# DEPRECATED:
-# Enables the Image Import workflow introduced in Pike
-#
-# As '[DEFAULT]/node_staging_uri' is required for the Image
-# Import, it's disabled per default in Pike, enabled per
-# default in Queens and removed in Rocky. This allows Glance to
-# operate with previous version configs upon upgrade.
-#
-# Setting this option to True will enable the endpoints related
-# to Image Import Refactoring work.
-#
-# Related options:
-#     * [DEFUALT]/node_staging_uri (boolean value)
-# This option is deprecated for removal since Pike.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated for removal in Rocky.
-#
-# It was introduced to make sure that the API is not enabled
-# before the '[DEFAULT]/node_staging_uri' is defined and is
-# long term redundant.
-#enable_image_import = false
 
 #
 # The amount of time, in seconds, to delay image scrubbing.
@@ -670,6 +621,7 @@
 #  (integer value)
 # Minimum value: 0
 #wakeup_time = 300
+wakeup_time = 300
 
 #
 # Run scrubber as a daemon.
@@ -693,6 +645,7 @@
 #
 #  (boolean value)
 #daemon = false
+daemon = false
 
 #
 # Protocol to use for communication with the registry server.
@@ -915,8 +868,9 @@
 # Related options:
 #     * None
 #
-#  (unknown value)
+#  (string value)
 #registry_host = 0.0.0.0
+registry_host = 172.16.10.36
 
 #
 # Port the registry server is listening on.
@@ -931,6 +885,7 @@
 # Minimum value: 0
 # Maximum value: 65535
 #registry_port = 9191
+registry_port = 9191
 
 #
 # From oslo.log
@@ -940,6 +895,12 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -961,6 +922,7 @@
 # log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
+log_file = /var/log/glance/scrubber.log
 
 # (Optional) The base directory used for relative log_file  paths. This option
 # is ignored if log_config_append is set. (string value)
@@ -979,19 +941,13 @@
 # set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
 # Log output to standard error. This option is ignored if log_config_append is
 # set. (boolean value)
-#use_stderr = false
+#use_stderr = true
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
@@ -1013,7 +969,7 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -1025,18 +981,6 @@
 # value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
@@ -1047,7 +991,16 @@
 # From oslo.db
 #
 
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect the
+# database.
+#sqlite_db = oslo.sqlite
+
 # If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
 #sqlite_synchronous = true
 
 # The back end to use for the database. (string value)
@@ -1070,10 +1023,6 @@
 # the server configuration, set this to no value. Example: mysql_sql_mode=
 # (string value)
 #mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
 
 # Timeout before idle SQL connections are reaped. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
@@ -1233,7 +1182,7 @@
 # /store-capabilities.html
 #
 # For more information on setting up a particular store in your
-# deployment and help with the usage of this feature, please contact
+# deplyment and help with the usage of this feature, please contact
 # the storage driver maintainers listed here:
 # http://docs.openstack.org/developer/glance_store/drivers/index.html
 #
@@ -1262,8 +1211,8 @@
 #
 # Possible values:
 #     * A string of of the following form:
-#       ``<service_type>:<service_name>:<interface>``
-#       At least ``service_type`` and ``interface`` should be specified.
+#       ``<service_type>:<service_name>:<endpoint_type>``
+#       At least ``service_type`` and ``endpoint_type`` should be specified.
 #       ``service_name`` can be omitted.
 #
 # Related options:
@@ -1486,25 +1435,6 @@
 #
 #  (string value)
 #rootwrap_config = /etc/glance/rootwrap.conf
-
-#
-# Volume type that will be used for volume creation in cinder.
-#
-# Some cinder backends can have several volume types to optimize storage usage.
-# Adding this option allows an operator to choose a specific volume type
-# in cinder that can be optimized for images.
-#
-# If this is not set, then the default volume type specified in the cinder
-# configuration will be used for volume creation.
-#
-# Possible values:
-#     * A valid volume type from cinder
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#cinder_volume_type = <None>
 
 #
 # Directory to which the filesystem backend store writes images.
@@ -1585,7 +1515,6 @@
 #     * None
 #
 #  (string value)
-#filesystem_store_metadata_file = <None>
 
 #
 # File access permissions for the image files.
@@ -1842,7 +1771,7 @@
 # Related Options:
 #     * sheepdog_store_port
 #
-#  (unknown value)
+#  (string value)
 #sheepdog_store_address = 127.0.0.1
 
 #
@@ -2087,16 +2016,12 @@
 # images in its own account. More details multi-tenant store can be found at
 # https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
 #
-# NOTE: If using multi-tenant swift store, please make sure
-# that you do not set a swift configuration file with the
-# 'swift_store_config_file' option.
-#
 # Possible values:
 #     * True
 #     * False
 #
 # Related options:
-#     * swift_store_config_file
+#     * None
 #
 #  (boolean value)
 #swift_store_multi_tenant = false
@@ -2312,15 +2237,12 @@
 # option is highly recommended while using Swift storage backend for
 # image storage as it avoids storage of credentials in the database.
 #
-# NOTE: Please do not configure this option if you have set
-# ``swift_store_multi_tenant`` to ``True``.
-#
 # Possible values:
 #     * String value representing an absolute path on the glance-api
 #       node
 #
 # Related options:
-#     * swift_store_multi_tenant
+#     * None
 #
 #  (string value)
 #swift_store_config_file = <None>
@@ -2341,7 +2263,7 @@
 #     * vmware_server_username
 #     * vmware_server_password
 #
-#  (unknown value)
+#  (string value)
 #vmware_server_host = 127.0.0.1
 
 #
@@ -2511,12 +2433,14 @@
 #
 
 # Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
 #disable_process_locking = false
 
 # Directory to use for lock files.  For security, the specified directory should
 # only be writable by the user running the processes that need locking. Defaults
 # to environment variable OSLO_LOCK_PATH. If external locks are used, a lock
 # path must be set. (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
 #lock_path = <None>
 
 
@@ -2526,10 +2450,12 @@
 # From oslo.policy
 #
 
-# The file that defines policies. (string value)
+# The JSON file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
 #policy_file = policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
 #policy_default_rule = default
 
 # Directories where policy configuration files are stored. They can be relative
@@ -2537,4 +2463,5 @@
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
 #policy_dirs = policy.d

2018-05-09 23:23:11,405 [salt.state       ][INFO    ][22470] Completed state [/etc/glance/glance-scrubber.conf] at time 23:23:11.405434 duration_in_ms=100.574
2018-05-09 23:23:11,405 [salt.state       ][INFO    ][22470] Running state [/etc/glance/glance-api.conf] at time 23:23:11.405875
2018-05-09 23:23:11,406 [salt.state       ][INFO    ][22470] Executing state file.managed for /etc/glance/glance-api.conf
2018-05-09 23:23:11,439 [salt.fileclient  ][INFO    ][22470] Fetching file from saltenv 'base', ** done ** 'glance/files/pike/glance-api.conf.Debian'
2018-05-09 23:23:11,681 [salt.state       ][INFO    ][22470] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -79,9 +81,9 @@
 #max_request_id_length = 64
 
 #
-# Public url endpoint to use for Glance versions response.
-#
-# This is the public url endpoint that will appear in the Glance
+# Public url endpoint to use for Glance/Glare versions response.
+#
+# This is the public url endpoint that will appear in the Glance/Glare
 # "versions" response. If no value is specified, the endpoint that is
 # displayed in the version's response is that of the host running the
 # API service. Change the endpoint to represent the proxy URL if the
@@ -233,6 +235,7 @@
 #  (integer value)
 # Minimum value: 1
 #limit_param_default = 25
+limit_param_default = 25
 
 #
 # Maximum number of results that could be returned by a request.
@@ -258,6 +261,7 @@
 #  (integer value)
 # Minimum value: 1
 #api_limit_max = 1000
+api_limit_max = 1000
 
 #
 # Show direct image location when returning an image.
@@ -290,6 +294,7 @@
 #
 #  (boolean value)
 #show_image_direct_url = false
+show_image_direct_url = true
 
 # DEPRECATED:
 # Show all image locations when returning an image.
@@ -321,10 +326,11 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
+# Reason: This option will be removed in the Ocata release because the same
+# functionality can be achieved with greater granularity by using policies.
 # Please see the Newton release notes for more information.
 #show_multiple_locations = false
+show_multiple_locations = true
 
 #
 # Maximum size of image a user can upload in bytes.
@@ -409,6 +415,7 @@
 #
 #  (boolean value)
 #enable_v1_api = true
+enable_v1_api=False
 
 #
 # Deploy the v2 OpenStack Images API.
@@ -439,6 +446,7 @@
 #
 #  (boolean value)
 #enable_v2_api = true
+enable_v2_api=True
 
 #
 # Deploy the v1 API Registry service.
@@ -504,7 +512,7 @@
 # Related options:
 #     * None
 #
-#  (unknown value)
+#  (string value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -568,56 +576,6 @@
 #
 #  (string value)
 #digest_algorithm = sha256
-
-#
-# The URL provides location where the temporary data will be stored
-#
-# This option is for Glance internal use only. Glance will save the
-# image data uploaded by the user to 'staging' endpoint during the
-# image import process.
-#
-# This option does not change the 'staging' API endpoint by any means.
-#
-# NOTE: It is discouraged to use same path as [task]/work_dir
-#
-# NOTE: 'file://<absolute-directory-path>' is the only option
-# api_image_import flow will support for now.
-#
-# NOTE: The staging path must be on shared filesystem available to all
-# Glance API nodes.
-#
-# Possible values:
-#     * String starting with 'file://' followed by absolute FS path
-#
-# Related options:
-#     * [task]/work_dir
-#     * [DEFAULT]/enable_image_import (*deprecated*)
-#
-#  (string value)
-#node_staging_uri = file:///tmp/staging/
-
-# DEPRECATED:
-# Enables the Image Import workflow introduced in Pike
-#
-# As '[DEFAULT]/node_staging_uri' is required for the Image
-# Import, it's disabled per default in Pike, enabled per
-# default in Queens and removed in Rocky. This allows Glance to
-# operate with previous version configs upon upgrade.
-#
-# Setting this option to True will enable the endpoints related
-# to Image Import Refactoring work.
-#
-# Related options:
-#     * [DEFUALT]/node_staging_uri (boolean value)
-# This option is deprecated for removal since Pike.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated for removal in Rocky.
-#
-# It was introduced to make sure that the API is not enabled
-# before the '[DEFAULT]/node_staging_uri' is defined and is
-# long term redundant.
-#enable_image_import = false
 
 #
 # Strategy to determine the preference order of image locations.
@@ -646,6 +604,9 @@
 # Allowed values: location_order, store_type
 #location_strategy = location_order
 
+location_strategy = location_order
+
+
 #
 # The location of the property protection file.
 #
@@ -660,7 +621,7 @@
 # protections won't be enforced. If a value is specified and the file
 # is not found, the glance-api service will fail to start.
 # More information on property protections can be found at:
-# https://docs.openstack.org/glance/latest/admin/property-protections.html
+# http://docs.openstack.org/developer/glance/property-protections.html
 #
 # Possible values:
 #     * Empty string
@@ -686,8 +647,7 @@
 # policy.json is used to express property protections for each
 # of the CRUD operations. Examples of how property protections
 # are enforced based on ``roles`` or ``policies`` can be found at:
-# https://docs.openstack.org/glance/latest/admin/property-
-# protections.html#examples
+# http://docs.openstack.org/developer/glance/property-protections.html#examples
 #
 # Possible values:
 #     * roles
@@ -738,8 +698,9 @@
 # Related options:
 #     * None
 #
-#  (unknown value)
+#  (string value)
 #bind_host = 0.0.0.0
+bind_host = 172.16.10.36
 
 #
 # Port number on which the server will listen.
@@ -759,6 +720,7 @@
 # Minimum value: 0
 # Maximum value: 65535
 #bind_port = <None>
+bind_port = 9292
 
 #
 # Number of Glance worker processes to start.
@@ -783,6 +745,7 @@
 #  (integer value)
 # Minimum value: 0
 #workers = <None>
+workers = 1
 
 #
 # Maximum line size of message headers.
@@ -1039,6 +1002,7 @@
 #  (integer value)
 # Minimum value: 0
 #image_cache_max_size = 10737418240
+
 
 #
 # The amount of time, in seconds, an incomplete image remains in the cache.
@@ -1154,8 +1118,9 @@
 # Related options:
 #     * None
 #
-#  (unknown value)
+#  (string value)
 #registry_host = 0.0.0.0
+registry_host = 172.16.10.36
 
 #
 # Port the registry server is listening on.
@@ -1170,6 +1135,7 @@
 # Minimum value: 0
 # Maximum value: 65535
 #registry_port = 9191
+registry_port = 9191
 
 # DEPRECATED: Whether to pass through the user token when making requests to the
 # registry. To prevent failures with token expiration during big files upload,
@@ -1245,6 +1211,9 @@
 # Keystone trusts support.
 #auth_region = <None>
 
+auth_region = RegionOne
+
+
 #
 # Protocol to use for communication with the registry server.
 #
@@ -1271,6 +1240,7 @@
 #  (string value)
 # Allowed values: http, https
 #registry_client_protocol = http
+registry_client_protocol = http
 
 #
 # Absolute path to the private key file.
@@ -1337,7 +1307,6 @@
 #     * registry_client_insecure
 #
 #  (string value)
-#registry_client_ca_file = /etc/ssl/cafile/file.ca
 
 #
 # Set verification of the registry server certificate.
@@ -1498,6 +1467,14 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -1519,6 +1496,7 @@
 # log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
+log_file = /var/log/glance/api.log
 
 # (Optional) The base directory used for relative log_file  paths. This option
 # is ignored if log_config_append is set. (string value)
@@ -1537,12 +1515,6 @@
 # set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
@@ -1571,7 +1543,7 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -1603,6 +1575,7 @@
 #
 
 # Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
 #rpc_conn_pool_size = 30
 
 # The pool size limit for connections expiration policy (integer value)
@@ -1613,24 +1586,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
-# Allowed values: redis, sentinel, dummy
+# Allowed values: redis, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -1643,57 +1622,56 @@
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target (
 # < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
 # a queue when server side disconnects. False means to keep queue and messages
 # even if server is disconnected, when the server appears we send all
 # accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
+#zmq_immediate = false
 # Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
 # other negative value) means to skip any overrides and leave it to OS default;
 # 0 and 1 (or any other positive value) mean to disable and enable the option
@@ -1749,8 +1727,7 @@
 # value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
@@ -1760,6 +1737,7 @@
 # A URL representing the messaging driver to use and its full configuration.
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -1771,6 +1749,8 @@
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
 #control_exchange = openstack
+control_exchange = openstack
+scrubber_datadir=/var/lib/glance/scrubber
 
 
 [cors]
@@ -1802,18 +1782,57 @@
 #allow_headers = Content-MD5,X-Image-Meta-Checksum,X-Storage-Token,Accept-Encoding,X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
 
 
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Image-Meta-Checksum,X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request. (list
+# value)
+#allow_headers = Content-MD5,X-Image-Meta-Checksum,X-Storage-Token,Accept-Encoding,X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
 [database]
 
 #
 # From oslo.db
 #
 
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect the
+# database.
+#sqlite_db = oslo.sqlite
+
 # If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
 #sqlite_synchronous = true
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
+backend = sqlalchemy
 
 # The SQLAlchemy connection string to use to connect to the database. (string
 # value)
@@ -1821,6 +1840,7 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
+connection = mysql+pymysql://glance:opnfv_secret@172.16.10.36/glance
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
@@ -1832,15 +1852,12 @@
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
 # Timeout before idle SQL connections are reaped. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #idle_timeout = 3600
+idle_timeout = 3600
 
 # Minimum number of SQL connections to keep open in a pool. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
@@ -1858,6 +1875,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -1868,6 +1886,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -1941,7 +1960,8 @@
 #
 #  (list value)
 #stores = file,http
-
+default_store = file
+stores = file,http
 #
 # The default scheme to use for storing images.
 #
@@ -1994,7 +2014,7 @@
 # /store-capabilities.html
 #
 # For more information on setting up a particular store in your
-# deployment and help with the usage of this feature, please contact
+# deplyment and help with the usage of this feature, please contact
 # the storage driver maintainers listed here:
 # http://docs.openstack.org/developer/glance_store/drivers/index.html
 #
@@ -2023,8 +2043,8 @@
 #
 # Possible values:
 #     * A string of of the following form:
-#       ``<service_type>:<service_name>:<interface>``
-#       At least ``service_type`` and ``interface`` should be specified.
+#       ``<service_type>:<service_name>:<endpoint_type>``
+#       At least ``service_type`` and ``endpoint_type`` should be specified.
 #       ``service_name`` can be omitted.
 #
 # Related options:
@@ -2038,6 +2058,9 @@
 #  (string value)
 #cinder_catalog_info = volumev2::publicURL
 
+
+cinder_catalog_info = volumev2::internalURL
+
 #
 # Override service catalog lookup with template for cinder endpoint.
 #
@@ -2082,6 +2105,9 @@
 # Deprecated group/name - [glance_store]/os_region_name
 #cinder_os_region_name = <None>
 
+cinder_os_region_name = RegionOne
+
+
 #
 # Location of a CA certificates file used for cinder client requests.
 #
@@ -2097,7 +2123,6 @@
 #     * cinder_api_insecure
 #
 #  (string value)
-#cinder_ca_certificates_file = <None>
 
 #
 # Number of cinderclient retries on failed http calls.
@@ -2249,25 +2274,6 @@
 #rootwrap_config = /etc/glance/rootwrap.conf
 
 #
-# Volume type that will be used for volume creation in cinder.
-#
-# Some cinder backends can have several volume types to optimize storage usage.
-# Adding this option allows an operator to choose a specific volume type
-# in cinder that can be optimized for images.
-#
-# If this is not set, then the default volume type specified in the cinder
-# configuration will be used for volume creation.
-#
-# Possible values:
-#     * A valid volume type from cinder
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#cinder_volume_type = <None>
-
-#
 # Directory to which the filesystem backend store writes images.
 #
 # Upon start up, Glance creates the directory if it doesn't already
@@ -2292,6 +2298,7 @@
 #
 #  (string value)
 #filesystem_store_datadir = /var/lib/glance/images
+filesystem_store_datadir = /var/lib/glance/images/
 
 #
 # List of directories and their priorities to which the filesystem
@@ -2346,7 +2353,6 @@
 #     * None
 #
 #  (string value)
-#filesystem_store_metadata_file = <None>
 
 #
 # File access permissions for the image files.
@@ -2435,106 +2441,6 @@
 #http_proxy_information =
 
 #
-# Size, in megabytes, to chunk RADOS images into.
-#
-# Provide an integer value representing the size in megabytes to chunk
-# Glance images into. The default chunk size is 8 megabytes. For optimal
-# performance, the value should be a power of two.
-#
-# When Ceph's RBD object storage system is used as the storage backend
-# for storing Glance images, the images are chunked into objects of the
-# size set using this option. These chunked objects are then stored
-# across the distributed block data store to use for Glance.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#rbd_store_chunk_size = 8
-
-#
-# RADOS pool in which images are stored.
-#
-# When RBD is used as the storage backend for storing Glance images, the
-# images are stored by means of logical grouping of the objects (chunks
-# of images) into a ``pool``. Each pool is defined with the number of
-# placement groups it can contain. The default pool that is used is
-# 'images'.
-#
-# More information on the RBD storage backend can be found here:
-# http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/
-#
-# Possible Values:
-#     * A valid pool name
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#rbd_store_pool = images
-
-#
-# RADOS user to authenticate as.
-#
-# This configuration option takes in the RADOS user to authenticate as.
-# This is only needed when RADOS authentication is enabled and is
-# applicable only if the user is using Cephx authentication. If the
-# value for this option is not set by the user or is set to None, a
-# default value will be chosen, which will be based on the client.
-# section in rbd_store_ceph_conf.
-#
-# Possible Values:
-#     * A valid RADOS user
-#
-# Related options:
-#     * rbd_store_ceph_conf
-#
-#  (string value)
-#rbd_store_user = <None>
-
-#
-# Ceph configuration file path.
-#
-# This configuration option takes in the path to the Ceph configuration
-# file to be used. If the value for this option is not set by the user
-# or is set to None, librados will locate the default configuration file
-# which is located at /etc/ceph/ceph.conf. If using Cephx
-# authentication, this file should include a reference to the right
-# keyring in a client.<USER> section
-#
-# Possible Values:
-#     * A valid path to a configuration file
-#
-# Related options:
-#     * rbd_store_user
-#
-#  (string value)
-#rbd_store_ceph_conf = /etc/ceph/ceph.conf
-
-#
-# Timeout value for connecting to Ceph cluster.
-#
-# This configuration option takes in the timeout value in seconds used
-# when connecting to the Ceph cluster i.e. it sets the time to wait for
-# glance-api before closing the connection. This prevents glance-api
-# hangups during the connection to RBD. If the value for this option
-# is set to less than or equal to 0, no timeout is set and the default
-# librados value is used.
-#
-# Possible Values:
-#     * Any integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-#rados_connect_timeout = 0
-
-#
 # Chunk size for images to be stored in Sheepdog data store.
 #
 # Provide an integer value representing the size in mebibyte
@@ -2603,7 +2509,7 @@
 # Related Options:
 #     * sheepdog_store_port
 #
-#  (unknown value)
+#  (string value)
 #sheepdog_store_address = 127.0.0.1
 
 #
@@ -2622,469 +2528,6 @@
 #     * swift_store_cacert
 #
 #  (boolean value)
-#swift_store_auth_insecure = false
-
-#
-# Path to the CA bundle file.
-#
-# This configuration option enables the operator to specify the path to
-# a custom Certificate Authority file for SSL verification when
-# connecting to Swift.
-#
-# Possible values:
-#     * A valid path to a CA file
-#
-# Related options:
-#     * swift_store_auth_insecure
-#
-#  (string value)
-#swift_store_cacert = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The region of Swift endpoint to use by Glance.
-#
-# Provide a string value representing a Swift region where Glance
-# can connect to for image storage. By default, there is no region
-# set.
-#
-# When Glance uses Swift as the storage backend to store images
-# for a specific tenant that has multiple endpoints, setting of a
-# Swift region with ``swift_store_region`` allows Glance to connect
-# to Swift in the specified region as opposed to a single region
-# connectivity.
-#
-# This option can be configured for both single-tenant and
-# multi-tenant storage.
-#
-# NOTE: Setting the region with ``swift_store_region`` is
-# tenant-specific and is necessary ``only if`` the tenant has
-# multiple endpoints across different regions.
-#
-# Possible values:
-#     * A string value representing a valid Swift region.
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#swift_store_region = RegionTwo
-
-#
-# The URL endpoint to use for Swift backend storage.
-#
-# Provide a string value representing the URL endpoint to use for
-# storing Glance images in Swift store. By default, an endpoint
-# is not set and the storage URL returned by ``auth`` is used.
-# Setting an endpoint with ``swift_store_endpoint`` overrides the
-# storage URL and is used for Glance image storage.
-#
-# NOTE: The URL should include the path up to, but excluding the
-# container. The location of an object is obtained by appending
-# the container and object to the configured URL.
-#
-# Possible values:
-#     * String value representing a valid URL path up to a Swift container
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name
-
-#
-# Endpoint Type of Swift service.
-#
-# This string value indicates the endpoint type to use to fetch the
-# Swift endpoint. The endpoint type determines the actions the user will
-# be allowed to perform, for instance, reading and writing to the Store.
-# This setting is only used if swift_store_auth_version is greater than
-# 1.
-#
-# Possible values:
-#     * publicURL
-#     * adminURL
-#     * internalURL
-#
-# Related options:
-#     * swift_store_endpoint
-#
-#  (string value)
-# Allowed values: publicURL, adminURL, internalURL
-#swift_store_endpoint_type = publicURL
-
-#
-# Type of Swift service to use.
-#
-# Provide a string value representing the service type to use for
-# storing images while using Swift backend storage. The default
-# service type is set to ``object-store``.
-#
-# NOTE: If ``swift_store_auth_version`` is set to 2, the value for
-# this configuration option needs to be ``object-store``. If using
-# a higher version of Keystone or a different auth scheme, this
-# option may be modified.
-#
-# Possible values:
-#     * A string representing a valid service type for Swift storage.
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#swift_store_service_type = object-store
-
-#
-# Name of single container to store images/name prefix for multiple containers
-#
-# When a single container is being used to store images, this configuration
-# option indicates the container within the Glance account to be used for
-# storing all images. When multiple containers are used to store images, this
-# will be the name prefix for all containers. Usage of single/multiple
-# containers can be controlled using the configuration option
-# ``swift_store_multiple_containers_seed``.
-#
-# When using multiple containers, the containers will be named after the value
-# set for this configuration option with the first N chars of the image UUID
-# as the suffix delimited by an underscore (where N is specified by
-# ``swift_store_multiple_containers_seed``).
-#
-# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
-# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
-# the container ``glance_fda``. All dashes in the UUID are included when
-# creating the container name but do not count toward the character limit, so
-# when N=10 the container name would be ``glance_fdae39a1-ba.``
-#
-# Possible values:
-#     * If using single container, this configuration option can be any string
-#       that is a valid swift container name in Glance's Swift account
-#     * If using multiple containers, this configuration option can be any
-#       string as long as it satisfies the container naming rules enforced by
-#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
-#       taken into account as well.
-#
-# Related options:
-#     * ``swift_store_multiple_containers_seed``
-#     * ``swift_store_multi_tenant``
-#     * ``swift_store_create_container_on_put``
-#
-#  (string value)
-#swift_store_container = glance
-
-#
-# The size threshold, in MB, after which Glance will start segmenting image
-# data.
-#
-# Swift has an upper limit on the size of a single uploaded object. By default,
-# this is 5GB. To upload objects bigger than this limit, objects are segmented
-# into multiple smaller objects that are tied together with a manifest file.
-# For more detail, refer to
-# http://docs.openstack.org/developer/swift/overview_large_objects.html
-#
-# This configuration option specifies the size threshold over which the Swift
-# driver will start segmenting image data into multiple smaller files.
-# Currently, the Swift driver only supports creating Dynamic Large Objects.
-#
-# NOTE: This should be set by taking into account the large object limit
-# enforced by the Swift cluster in consideration.
-#
-# Possible values:
-#     * A positive integer that is less than or equal to the large object limit
-#       enforced by the Swift cluster in consideration.
-#
-# Related options:
-#     * ``swift_store_large_object_chunk_size``
-#
-#  (integer value)
-# Minimum value: 1
-#swift_store_large_object_size = 5120
-
-#
-# The maximum size, in MB, of the segments when image data is segmented.
-#
-# When image data is segmented to upload images that are larger than the limit
-# enforced by the Swift cluster, image data is broken into segments that are no
-# bigger than the size specified by this configuration option.
-# Refer to ``swift_store_large_object_size`` for more detail.
-#
-# For example: if ``swift_store_large_object_size`` is 5GB and
-# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
-# segmented into 7 segments where the first six segments will be 1GB in size and
-# the seventh segment will be 0.2GB.
-#
-# Possible values:
-#     * A positive integer that is less than or equal to the large object limit
-#       enforced by Swift cluster in consideration.
-#
-# Related options:
-#     * ``swift_store_large_object_size``
-#
-#  (integer value)
-# Minimum value: 1
-#swift_store_large_object_chunk_size = 200
-
-#
-# Create container, if it doesn't already exist, when uploading image.
-#
-# At the time of uploading an image, if the corresponding container doesn't
-# exist, it will be created provided this configuration option is set to True.
-# By default, it won't be created. This behavior is applicable for both single
-# and multiple containers mode.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * None
-#
-#  (boolean value)
-#swift_store_create_container_on_put = false
-
-#
-# Store images in tenant's Swift account.
-#
-# This enables multi-tenant storage mode which causes Glance images to be stored
-# in tenant specific Swift accounts. If this is disabled, Glance stores all
-# images in its own account. More details multi-tenant store can be found at
-# https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
-#
-# NOTE: If using multi-tenant swift store, please make sure
-# that you do not set a swift configuration file with the
-# 'swift_store_config_file' option.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_config_file
-#
-#  (boolean value)
-#swift_store_multi_tenant = false
-
-#
-# Seed indicating the number of containers to use for storing images.
-#
-# When using a single-tenant store, images can be stored in one or more than one
-# containers. When set to 0, all images will be stored in one single container.
-# When set to an integer value between 1 and 32, multiple containers will be
-# used to store images. This configuration option will determine how many
-# containers are created. The total number of containers that will be used is
-# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
-# will be used to store images.
-#
-# Please refer to ``swift_store_container`` for more detail on the naming
-# convention. More detail about using multiple containers can be found at
-# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
-# multiple-containers.html
-#
-# NOTE: This is used only when swift_store_multi_tenant is disabled.
-#
-# Possible values:
-#     * A non-negative integer less than or equal to 32
-#
-# Related options:
-#     * ``swift_store_container``
-#     * ``swift_store_multi_tenant``
-#     * ``swift_store_create_container_on_put``
-#
-#  (integer value)
-# Minimum value: 0
-# Maximum value: 32
-#swift_store_multiple_containers_seed = 0
-
-#
-# List of tenants that will be granted admin access.
-#
-# This is a list of tenants that will be granted read/write access on
-# all Swift containers created by Glance in multi-tenant mode. The
-# default value is an empty list.
-#
-# Possible values:
-#     * A comma separated list of strings representing UUIDs of Keystone
-#       projects/tenants
-#
-# Related options:
-#     * None
-#
-#  (list value)
-#swift_store_admin_tenants =
-
-#
-# SSL layer compression for HTTPS Swift requests.
-#
-# Provide a boolean value to determine whether or not to compress
-# HTTPS Swift requests for images at the SSL layer. By default,
-# compression is enabled.
-#
-# When using Swift as the backend store for Glance image storage,
-# SSL layer compression of HTTPS Swift requests can be set using
-# this option. If set to False, SSL layer compression of HTTPS
-# Swift requests is disabled. Disabling this option may improve
-# performance for images which are already in a compressed format,
-# for example, qcow2.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related Options:
-#     * None
-#
-#  (boolean value)
-#swift_store_ssl_compression = true
-
-#
-# The number of times a Swift download will be retried before the
-# request fails.
-#
-# Provide an integer value representing the number of times an image
-# download must be retried before erroring out. The default value is
-# zero (no retry on a failed image download). When set to a positive
-# integer value, ``swift_store_retry_get_count`` ensures that the
-# download is attempted this many more times upon a download failure
-# before sending an error message.
-#
-# Possible values:
-#     * Zero
-#     * Positive integer value
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#swift_store_retry_get_count = 0
-
-#
-# Time in seconds defining the size of the window in which a new
-# token may be requested before the current token is due to expire.
-#
-# Typically, the Swift storage driver fetches a new token upon the
-# expiration of the current token to ensure continued access to
-# Swift. However, some Swift transactions (like uploading image
-# segments) may not recover well if the token expires on the fly.
-#
-# Hence, by fetching a new token before the current token expiration,
-# we make sure that the token does not expire or is close to expiry
-# before a transaction is attempted. By default, the Swift storage
-# driver requests for a new token 60 seconds or less before the
-# current token expiration.
-#
-# Possible values:
-#     * Zero
-#     * Positive integer value
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#swift_store_expire_soon_interval = 60
-
-#
-# Use trusts for multi-tenant Swift store.
-#
-# This option instructs the Swift store to create a trust for each
-# add/get request when the multi-tenant store is in use. Using trusts
-# allows the Swift store to avoid problems that can be caused by an
-# authentication token expiring during the upload or download of data.
-#
-# By default, ``swift_store_use_trusts`` is set to ``True``(use of
-# trusts is enabled). If set to ``False``, a user token is used for
-# the Swift connection instead, eliminating the overhead of trust
-# creation.
-#
-# NOTE: This option is considered only when
-# ``swift_store_multi_tenant`` is set to ``True``
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_multi_tenant
-#
-#  (boolean value)
-#swift_store_use_trusts = true
-
-#
-# Reference to default Swift account/backing store parameters.
-#
-# Provide a string value representing a reference to the default set
-# of parameters required for using swift account/backing store for
-# image storage. The default reference value for this configuration
-# option is 'ref1'. This configuration option dereferences the
-# parameters and facilitates image storage in Swift storage backend
-# every time a new image is added.
-#
-# Possible values:
-#     * A valid string value
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#default_swift_reference = ref1
-
-# DEPRECATED: Version of the authentication service to use. Valid versions are 2
-# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'auth_version' in the Swift back-end configuration file is
-# used instead.
-#swift_store_auth_version = 2
-
-# DEPRECATED: The address where the Swift authentication service is listening.
-# (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'auth_address' in the Swift back-end configuration file is
-# used instead.
-#swift_store_auth_address = <None>
-
-# DEPRECATED: The user to authenticate against the Swift authentication service.
-# (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'user' in the Swift back-end configuration file is set instead.
-#swift_store_user = <None>
-
-# DEPRECATED: Auth key for the user authenticating against the Swift
-# authentication service. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'key' in the Swift back-end configuration file is used
-# to set the authentication key instead.
-#swift_store_key = <None>
-
-#
-# Absolute path to the file containing the swift account(s)
-# configurations.
-#
-# Include a string value representing the path to a configuration
-# file that has references for each of the configured Swift
-# account(s)/backing stores. By default, no file path is specified
-# and customized Swift referencing is disabled. Configuring this
-# option is highly recommended while using Swift storage backend for
-# image storage as it avoids storage of credentials in the database.
-#
-# NOTE: Please do not configure this option if you have set
-# ``swift_store_multi_tenant`` to ``True``.
-#
-# Possible values:
-#     * String value representing an absolute path on the glance-api
-#       node
-#
-# Related options:
-#     * swift_store_multi_tenant
-#
-#  (string value)
-#swift_store_config_file = <None>
 
 #
 # Address of the ESX/ESXi or vCenter Server target system.
@@ -3102,7 +2545,7 @@
 #     * vmware_server_username
 #     * vmware_server_password
 #
-#  (unknown value)
+#  (string value)
 #vmware_server_host = 127.0.0.1
 
 #
@@ -3277,11 +2720,21 @@
 
 # Supported values for the 'disk_format' image attribute (list value)
 # Deprecated group/name - [DEFAULT]/disk_formats
-disk_formats = ami,ari,aki,vhd,vhdx,vmdk,raw,qcow2,vdi,iso,ploop.root-tar
+#disk_formats = ami,ari,aki,vhd,vhdx,vmdk,raw,qcow2,vdi,iso
 
 
 [keystone_authtoken]
-
+revocation_cache_time = 10
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = glance
+password = opnfv_secret
+auth_uri=http://172.16.10.36:5000
+auth_url=http://172.16.10.36:35357
+
+token_cache_time = -1
 #
 # From keystonemiddleware.auth_token
 #
@@ -3289,10 +2742,10 @@
 # Complete "public" Identity API endpoint. This endpoint should not be an
 # "admin" endpoint, as it should be accessible by all end users. Unauthenticated
 # clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# endpoint should  ideally be unversioned, client support in the wild varies.
+# If you're using a versioned v2 endpoint here, then this  should *not* be the
+# same endpoint the service user utilizes  for validating tokens, because normal
+# end users may not be  able to reach that endpoint. (string value)
 #auth_uri = <None>
 
 # API version of the admin Identity API endpoint. (string value)
@@ -3332,12 +2785,7 @@
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
 
-# DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P release.
-# (string value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
+# Directory used to cache files related to PKI tokens. (string value)
 #signing_dir = <None>
 
 # Optionally specify a list of memcached server(s) to use for caching. If left
@@ -3350,14 +2798,10 @@
 # -1 to disable caching completely. (integer value)
 #token_cache_time = 300
 
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in the
-# Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
+# Determines the frequency at which the list of revoked tokens is retrieved from
+# the Identity service (in seconds). A high number of revocation events combined
+# with a low cache duration may significantly reduce performance. Only valid for
+# PKI tokens. (integer value)
 #revocation_cache_time = 10
 
 # (Optional) If defined, indicate whether token data should be authenticated or
@@ -3410,40 +2854,19 @@
 # value)
 #enforce_token_bind = permissive
 
-# DEPRECATED: If true, the revocation list will be checked for cached tokens.
-# This requires that PKI tokens are configured on the identity server. (boolean
-# value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
+# If true, the revocation list will be checked for cached tokens. This requires
+# that PKI tokens are configured on the identity server. (boolean value)
 #check_revocations_for_cached = false
 
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
-# single algorithm or multiple. The algorithms are those supported by Python
-# standard hashlib.new(). The hashes will be tried in the order given, so put
-# the preferred one first for performance. The result of the first hash will be
+# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm
+# or multiple. The algorithms are those supported by Python standard
+# hashlib.new(). The hashes will be tried in the order given, so put the
+# preferred one first for performance. The result of the first hash will be
 # stored in the cache. This will typically be set to multiple values only while
 # migrating from a less secure algorithm to a more secure one. Once all the old
 # tokens are expired this option should be set to a single value for better
 # performance. (list value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
 #hash_algorithms = md5
-
-# A choice of roles that must be present in a service token. Service tokens are
-# allowed to request that an expired token can be used and so this check should
-# tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present. For
-# backwards compatibility reasons this currently only affects the allow_expired
-# check. (list value)
-#service_token_roles = service
-
-# For backwards compatibility reasons we must let valid service tokens pass that
-# don't pass the service_token_roles check as valid. Setting this true will
-# become the default in a future release and should be enabled if possible.
-# (boolean value)
-#service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
@@ -3479,7 +2902,7 @@
 # Reason: Replaced by [DEFAULT]/transport_url
 #password =
 
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode) e.g.
 # [host:port, host1:port ... ] (list value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
@@ -3495,7 +2918,7 @@
 # Time in ms to wait before the transaction is killed. (integer value)
 #check_timeout = 20000
 
-# Timeout in ms on blocking socket operations. (integer value)
+# Timeout in ms on blocking socket operations (integer value)
 #socket_timeout = 10000
 
 
@@ -3506,12 +2929,14 @@
 #
 
 # Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
 #disable_process_locking = false
 
 # Directory to use for lock files.  For security, the specified directory should
 # only be writable by the user running the processes that need locking. Defaults
 # to environment variable OSLO_LOCK_PATH. If external locks are used, a lock
 # path must be set. (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
 #lock_path = <None>
 
 
@@ -3523,60 +2948,55 @@
 
 # Name for the AMQP container. must be globally unique. Defaults to a generated
 # UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
 #container_name = <None>
 
 # Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
 #idle_timeout = 0
 
 # Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
 #trace = false
 
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string value)
+# CA certificate PEM file to verify server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
 #ssl_ca_file =
 
-# Self-identifying certificate PEM file for client authentication (string value)
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
 #ssl_cert_file =
 
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
-# value)
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
 #ssl_key_file =
 
 # Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
 #ssl_key_password = <None>
 
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
 #allow_insecure_clients = false
 
 # Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
 #sasl_mechanisms =
 
 # Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
 #sasl_config_dir =
 
 # Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
 #sasl_config_name =
 
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
 #username =
 
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
 #password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
@@ -3598,12 +3018,8 @@
 # Minimum value: 1
 #link_retry_delay = 10
 
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
+# The deadline for an rpc reply message delivery. Only used when caller does not
+# provide a timeout expiry. (integer value)
 # Minimum value: 5
 #default_reply_timeout = 30
 
@@ -3616,11 +3032,6 @@
 # does not provide a timeout expiry. (integer value)
 # Minimum value: 5
 #default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
 
 # Indicates the addressing mode used by the driver.
 # Permitted values:
@@ -3631,12 +3042,15 @@
 #addressing_mode = dynamic
 
 # address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
 #server_request_prefix = exclusive
 
 # address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
 #broadcast_prefix = broadcast
 
 # address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
 #group_request_prefix = unicast
 
 # Address prefix for all generated RPC addresses (string value)
@@ -3666,6 +3080,7 @@
 # else control_exchange if set
 # else 'notify' (string value)
 #default_notification_exchange = <None>
+default_notification_exchange = glance
 
 # Exchange name used in RPC addresses.
 # Exchange name resolution precedence:
@@ -3687,66 +3102,6 @@
 # Minimum value: 1
 #notify_server_credit = 100
 
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# Pool Size for Kafka Consumers (integer value)
-#pool_size = 10
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point
-# value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
 
 [oslo_messaging_notifications]
 
@@ -3758,6 +3113,7 @@
 # messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
+driver = messagingv2
 
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
@@ -3769,11 +3125,6 @@
 # Deprecated group/name - [DEFAULT]/notification_topics
 #topics = notifications
 
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
 
 [oslo_messaging_rabbit]
 
@@ -3787,31 +3138,30 @@
 #amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
 #amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
 
 # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
 # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
 # distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
 
 # SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
 
 # SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
 
 # SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
 #kombu_reconnect_delay = 1.0
 
 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
@@ -3831,6 +3181,7 @@
 
 # DEPRECATED: The RabbitMQ broker address where a single node is used. (string
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -3839,34 +3190,43 @@
 # DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_port = 5672
 
 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_hosts = $rabbit_host:$rabbit_port
 
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
 # DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_userid = guest
 
 # DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_password = guest
 
 # The RabbitMQ login method. (string value)
-# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
 #rabbit_login_method = AMQPLAIN
 
 # DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -3877,6 +3237,7 @@
 
 # How long to backoff for between retries when connecting to RabbitMQ. (integer
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
 #rabbit_retry_backoff = 2
 
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
@@ -3885,6 +3246,7 @@
 
 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
 # (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #rabbit_max_retries = 0
@@ -3892,9 +3254,10 @@
 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
 # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
 # is no longer controlled by the x-ha-policy argument when declaring a queue. If
-# you just want to make sure that all queues (except those with auto-generated
+# you just want to make sure that all queues (except  those with auto-generated
 # names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
 # '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
 #rabbit_ha_queues = false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
@@ -3917,6 +3280,7 @@
 #heartbeat_rate = 2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
 #fake_rabbit = false
 
 # Maximum number of channels to allow (integer value)
@@ -3927,6 +3291,9 @@
 
 # How often to send heartbeats for consumer's connections (integer value)
 #heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
 
 # Arguments passed to ssl.wrap_socket (dict value)
 #ssl_options = <None>
@@ -3964,207 +3331,152 @@
 # (integer value)
 #pool_stale = 60
 
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to notification
+# listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending reply.
+# -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending reply.
+# (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more then one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_messaging_zmq]
+
+#
+# From oslo.messaging
+#
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Seconds to wait before a cast expires (TTL). The default value of -1 specifies
+# an infinite linger period. The value of 0 specifies no linger period. Pending
+# messages shall be discarded immediately when the socket is closed. Only
+# supported by impl_zmq. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#rpc_cast_timeout = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target (
+# < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = true
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = true
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to notification
-# listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending reply.
-# -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending reply.
-# (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
 # a queue when server side disconnects. False means to keep queue and messages
 # even if server is disconnected, when the server appears we send all
 # accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
+#zmq_immediate = false
 
 
 [oslo_middleware]
@@ -4184,10 +3496,13 @@
 # From oslo.policy
 #
 
-# The file that defines policies. (string value)
+# The JSON file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
 #policy_file = policy.json
+policy_file = /etc/glance/policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
 #policy_default_rule = default
 
 # Directories where policy configuration files are stored. They can be relative
@@ -4195,6 +3510,7 @@
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
 #policy_dirs = policy.d
 
 
@@ -4224,6 +3540,9 @@
 #
 #  (string value)
 #flavor = keystone
+
+flavor=keystone
+
 
 #
 # Name of the paste configuration file.
@@ -4315,42 +3634,8 @@
 # Examples of possible values:
 #
 # * messaging://: use oslo_messaging driver for sending notifications.
-# * mongodb://127.0.0.1:27017 : use mongodb driver for sending notifications.
-# * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for sending
-# notifications.
 #  (string value)
 #connection_string = messaging://
-
-#
-# Document type for notification indexing in elasticsearch.
-#  (string value)
-#es_doc_type = notification
-
-#
-# This parameter is a time value parameter (for example: es_scroll_time=2m),
-# indicating for how long the nodes that participate in the search will maintain
-# relevant resources in order to continue and support it.
-#  (string value)
-#es_scroll_time = 2m
-
-#
-# Elasticsearch splits large requests in batches. This parameter defines
-# maximum size of each batch (for example: es_scroll_size=10000).
-#  (integer value)
-#es_scroll_size = 10000
-
-#
-# Redissentinel provides a timeout option on the connections.
-# This parameter defines that timeout (for example: socket_timeout=0.1).
-#  (floating point value)
-#socket_timeout = 0.1
-
-#
-# Redissentinel uses a service name to identify a master redis service.
-# This parameter defines the name (for example:
-# sentinal_service_name=mymaster).
-#  (string value)
-#sentinel_service_name = mymaster
 
 
 [store_type_location_strategy]
@@ -4391,6 +3676,7 @@
 #store_type_preference =
 
 
+
 [task]
 
 #

2018-05-09 23:23:11,682 [salt.state       ][INFO    ][22470] Completed state [/etc/glance/glance-api.conf] at time 23:23:11.682622 duration_in_ms=276.746
2018-05-09 23:23:11,683 [salt.state       ][INFO    ][22470] Running state [/etc/glance/glance-api-paste.ini] at time 23:23:11.683084
2018-05-09 23:23:11,683 [salt.state       ][INFO    ][22470] Executing state file.managed for /etc/glance/glance-api-paste.ini
2018-05-09 23:23:11,708 [salt.fileclient  ][INFO    ][22470] Fetching file from saltenv 'base', ** done ** 'glance/files/pike/glance-api-paste.ini'
2018-05-09 23:23:11,759 [salt.state       ][INFO    ][22470] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 # Use this pipeline for no auth or image caching - DEFAULT
 [pipeline:glance-api]
 pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler unauthenticated-context rootapp
@@ -12,7 +13,7 @@
 
 # Use this pipeline for keystone auth
 [pipeline:glance-api-keystone]
-pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler authtoken context  rootapp
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler authtoken context rootapp
 
 # Use this pipeline for keystone auth with image caching
 [pipeline:glance-api-keystone+caching]

2018-05-09 23:23:11,759 [salt.state       ][INFO    ][22470] Completed state [/etc/glance/glance-api-paste.ini] at time 23:23:11.759318 duration_in_ms=76.234
2018-05-09 23:23:11,759 [salt.state       ][INFO    ][22470] Running state [/etc/default/glance-api] at time 23:23:11.759752
2018-05-09 23:23:11,759 [salt.state       ][INFO    ][22470] Executing state file.managed for /etc/default/glance-api
2018-05-09 23:23:11,777 [salt.fileclient  ][INFO    ][22470] Fetching file from saltenv 'base', ** done ** 'glance/files/default'
2018-05-09 23:23:11,782 [salt.state       ][INFO    ][22470] File changed:
New file
2018-05-09 23:23:11,782 [salt.state       ][INFO    ][22470] Completed state [/etc/default/glance-api] at time 23:23:11.782869 duration_in_ms=23.117
2018-05-09 23:23:11,783 [salt.state       ][INFO    ][22470] Running state [/etc/default/glance-registry] at time 23:23:11.783460
2018-05-09 23:23:11,783 [salt.state       ][INFO    ][22470] Executing state file.managed for /etc/default/glance-registry
2018-05-09 23:23:11,798 [salt.state       ][INFO    ][22470] File changed:
New file
2018-05-09 23:23:11,798 [salt.state       ][INFO    ][22470] Completed state [/etc/default/glance-registry] at time 23:23:11.798666 duration_in_ms=15.205
2018-05-09 23:23:11,799 [salt.state       ][INFO    ][22470] Running state [/etc/default/glance-glare] at time 23:23:11.799239
2018-05-09 23:23:11,799 [salt.state       ][INFO    ][22470] Executing state file.managed for /etc/default/glance-glare
2018-05-09 23:23:11,817 [salt.state       ][INFO    ][22470] File changed:
New file
2018-05-09 23:23:11,817 [salt.state       ][INFO    ][22470] Completed state [/etc/default/glance-glare] at time 23:23:11.817463 duration_in_ms=18.225
2018-05-09 23:23:11,821 [salt.state       ][INFO    ][22470] Running state [glance-api] at time 23:23:11.821440
2018-05-09 23:23:11,821 [salt.state       ][INFO    ][22470] Executing state service.running for glance-api
2018-05-09 23:23:11,822 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemctl', 'status', 'glance-api.service', '-n', '0'] in directory '/root'
2018-05-09 23:23:11,845 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemctl', 'is-active', 'glance-api.service'] in directory '/root'
2018-05-09 23:23:11,864 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemctl', 'is-enabled', 'glance-api.service'] in directory '/root'
2018-05-09 23:23:11,883 [salt.state       ][INFO    ][22470] The service glance-api is already running
2018-05-09 23:23:11,884 [salt.state       ][INFO    ][22470] Completed state [glance-api] at time 23:23:11.883978 duration_in_ms=62.537
2018-05-09 23:23:11,884 [salt.state       ][INFO    ][22470] Running state [glance-api] at time 23:23:11.884837
2018-05-09 23:23:11,885 [salt.state       ][INFO    ][22470] Executing state service.mod_watch for glance-api
2018-05-09 23:23:11,887 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemctl', 'is-active', 'glance-api.service'] in directory '/root'
2018-05-09 23:23:11,915 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemctl', 'is-enabled', 'glance-api.service'] in directory '/root'
2018-05-09 23:23:11,937 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'glance-api.service'] in directory '/root'
2018-05-09 23:23:12,012 [salt.state       ][INFO    ][22470] {'glance-api': True}
2018-05-09 23:23:12,013 [salt.state       ][INFO    ][22470] Completed state [glance-api] at time 23:23:12.013140 duration_in_ms=128.303
2018-05-09 23:23:12,015 [salt.state       ][INFO    ][22470] Running state [glance-registry] at time 23:23:12.015084
2018-05-09 23:23:12,015 [salt.state       ][INFO    ][22470] Executing state service.running for glance-registry
2018-05-09 23:23:12,017 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemctl', 'status', 'glance-registry.service', '-n', '0'] in directory '/root'
2018-05-09 23:23:12,035 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemctl', 'is-active', 'glance-registry.service'] in directory '/root'
2018-05-09 23:23:12,051 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemctl', 'is-enabled', 'glance-registry.service'] in directory '/root'
2018-05-09 23:23:12,067 [salt.state       ][INFO    ][22470] The service glance-registry is already running
2018-05-09 23:23:12,067 [salt.state       ][INFO    ][22470] Completed state [glance-registry] at time 23:23:12.067507 duration_in_ms=52.422
2018-05-09 23:23:12,067 [salt.state       ][INFO    ][22470] Running state [glance-registry] at time 23:23:12.067773
2018-05-09 23:23:12,068 [salt.state       ][INFO    ][22470] Executing state service.mod_watch for glance-registry
2018-05-09 23:23:12,068 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemctl', 'is-active', 'glance-registry.service'] in directory '/root'
2018-05-09 23:23:12,084 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemctl', 'is-enabled', 'glance-registry.service'] in directory '/root'
2018-05-09 23:23:12,102 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'glance-registry.service'] in directory '/root'
2018-05-09 23:23:12,150 [salt.state       ][INFO    ][22470] {'glance-registry': True}
2018-05-09 23:23:12,150 [salt.state       ][INFO    ][22470] Completed state [glance-registry] at time 23:23:12.150561 duration_in_ms=82.787
2018-05-09 23:23:12,153 [salt.state       ][INFO    ][22470] Running state [glance-manage db_sync] at time 23:23:12.153763
2018-05-09 23:23:12,154 [salt.state       ][INFO    ][22470] Executing state cmd.run for glance-manage db_sync
2018-05-09 23:23:12,154 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command 'glance-manage db_sync' in directory '/root'
2018-05-09 23:23:15,107 [salt.state       ][INFO    ][22470] {'pid': 23959, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/oslo_db/sqlalchemy/enginefacade.py:1328: OsloDBDeprecationWarning: EngineFacade is deprecated; please use oslo_db.sqlalchemy.enginefacade\n  expire_on_commit=expire_on_commit, _conf=conf)\n/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)\n/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, "\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> liberty, liberty initial\nINFO  [alembic.runtime.migration] Running upgrade liberty -> mitaka01, add index on created_at and updated_at columns of \'images\' table\nINFO  [alembic.runtime.migration] Running upgrade mitaka01 -> mitaka02, update metadef os_nova_server\nINFO  [alembic.runtime.migration] Running upgrade mitaka02 -> ocata01, add visibility to and remove is_public from images\nINFO  [alembic.runtime.migration] Running upgrade ocata01 -> pike01, drop glare artifacts tables\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.', 'stdout': 'Upgraded database to: pike01, current revision(s): pike01'}
2018-05-09 23:23:15,107 [salt.state       ][INFO    ][22470] Completed state [glance-manage db_sync] at time 23:23:15.107818 duration_in_ms=2954.056
2018-05-09 23:23:15,108 [salt.state       ][INFO    ][22470] Running state [glance-manage db_load_metadefs] at time 23:23:15.108787
2018-05-09 23:23:15,109 [salt.state       ][INFO    ][22470] Executing state cmd.run for glance-manage db_load_metadefs
2018-05-09 23:23:15,109 [salt.loaded.int.module.cmdmod][INFO    ][22470] Executing command 'glance-manage db_load_metadefs' in directory '/root'
2018-05-09 23:23:18,654 [salt.state       ][INFO    ][22470] {'pid': 24013, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/oslo_db/sqlalchemy/enginefacade.py:1328: OsloDBDeprecationWarning: EngineFacade is deprecated; please use oslo_db.sqlalchemy.enginefacade\n  expire_on_commit=expire_on_commit, _conf=conf)\n/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)\n2018-05-09 23:23:17.112 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-aggr-iops-filter.json loaded to database.\n2018-05-09 23:23:17.166 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/operating-system.json loaded to database.\n2018-05-09 23:23:17.234 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-host-capabilities.json loaded to database.\n2018-05-09 23:23:17.265 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-hypervisor.json loaded to database.\n2018-05-09 23:23:17.292 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vmware-flavor.json loaded to database.\n2018-05-09 23:23:17.324 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-instance-data.json loaded to database.\n2018-05-09 23:23:17.461 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-resource-allocation-setting-data.json loaded to database.\n2018-05-09 23:23:17.483 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-trust.json loaded to database.\n2018-05-09 23:23:17.503 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-aggr-num-instances.json loaded to database.\n2018-05-09 23:23:17.536 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-randomgen.json loaded to database.\n2018-05-09 23:23:17.558 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-aggr-disk-filter.json loaded to database.\n2018-05-09 23:23:17.661 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-storage-allocation-setting-data.json loaded to database.\n2018-05-09 23:23:17.697 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-watchdog.json loaded to database.\n2018-05-09 23:23:17.736 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-guest-memory-backing.json loaded to database.\n2018-05-09 23:23:17.787 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/software-webservers.json loaded to database.\n2018-05-09 23:23:17.864 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-libvirt-image.json loaded to database.\n2018-05-09 23:23:17.924 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vcputopology.json loaded to database.\n2018-05-09 23:23:17.953 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-quota.json loaded to database.\n2018-05-09 23:23:18.015 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/software-runtimes.json loaded to database.\n2018-05-09 23:23:18.061 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-cpu-pinning.json loaded to database.\n2018-05-09 23:23:18.081 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-guest-shutdown.json loaded to database.\n2018-05-09 23:23:18.188 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/software-databases.json loaded to database.\n2018-05-09 23:23:18.248 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-processor-allocation-setting-data.json loaded to database.\n2018-05-09 23:23:18.285 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vmware.json loaded to database.\n2018-05-09 23:23:18.310 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vmware-quota-flavor.json loaded to database.\n2018-05-09 23:23:18.333 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-xenapi.json loaded to database.\n2018-05-09 23:23:18.374 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/glance-common-image-props.json loaded to database.\n2018-05-09 23:23:18.405 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-libvirt.json loaded to database.\n2018-05-09 23:23:18.427 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/storage-volume-type.json loaded to database.\n2018-05-09 23:23:18.542 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-virtual-system-setting-data.json loaded to database.\n2018-05-09 23:23:18.580 24014 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/image-signature-verification.json loaded to database.\n2018-05-09 23:23:18.581 24014 INFO glance.db.sqlalchemy.metadata [-] Metadata loading finished', 'stdout': ''}
2018-05-09 23:23:18,654 [salt.state       ][INFO    ][22470] Completed state [glance-manage db_load_metadefs] at time 23:23:18.654750 duration_in_ms=3545.961
2018-05-09 23:23:18,656 [salt.state       ][INFO    ][22470] Running state [/srv/glance] at time 23:23:18.656070
2018-05-09 23:23:18,656 [salt.state       ][INFO    ][22470] Executing state file.directory for /srv/glance
2018-05-09 23:23:18,660 [salt.state       ][INFO    ][22470] {'/srv/glance': 'New Dir'}
2018-05-09 23:23:18,660 [salt.state       ][INFO    ][22470] Completed state [/srv/glance] at time 23:23:18.660834 duration_in_ms=4.765
2018-05-09 23:23:18,661 [salt.state       ][INFO    ][22470] Running state [/var/lib/glance/images] at time 23:23:18.661652
2018-05-09 23:23:18,662 [salt.state       ][INFO    ][22470] Executing state file.directory for /var/lib/glance/images
2018-05-09 23:23:18,664 [salt.state       ][INFO    ][22470] Directory /var/lib/glance/images is in the correct state
2018-05-09 23:23:18,664 [salt.state       ][INFO    ][22470] Completed state [/var/lib/glance/images] at time 23:23:18.664413 duration_in_ms=2.761
2018-05-09 23:23:18,667 [salt.minion      ][INFO    ][22470] Returning information for job: 20180509232250946726
2018-05-09 23:23:19,439 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232319412926
2018-05-09 23:23:19,457 [salt.minion      ][INFO    ][24025] Starting a new job with PID 24025
2018-05-09 23:23:21,922 [salt.state       ][INFO    ][24025] Loading fresh modules for state activity
2018-05-09 23:23:21,979 [salt.fileclient  ][INFO    ][24025] Fetching file from saltenv 'base', ** done ** 'nova/init.sls'
2018-05-09 23:23:22,019 [salt.fileclient  ][INFO    ][24025] Fetching file from saltenv 'base', ** done ** 'nova/controller.sls'
2018-05-09 23:23:23,349 [salt.state       ][INFO    ][24025] Running state [debconf-utils] at time 23:23:23.349856
2018-05-09 23:23:23,350 [salt.state       ][INFO    ][24025] Executing state pkg.installed for debconf-utils
2018-05-09 23:23:23,351 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:23:23,778 [salt.state       ][INFO    ][24025] All specified packages are already installed
2018-05-09 23:23:23,779 [salt.state       ][INFO    ][24025] Completed state [debconf-utils] at time 23:23:23.778926 duration_in_ms=429.07
2018-05-09 23:23:23,781 [salt.state       ][INFO    ][24025] Running state [nova-consoleproxy] at time 23:23:23.781464
2018-05-09 23:23:23,781 [salt.state       ][INFO    ][24025] Executing state debconf.set for nova-consoleproxy
2018-05-09 23:23:23,782 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'debconf-get-selections' in directory '/root'
2018-05-09 23:23:24,024 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'debconf-set-selections /tmp/salt-p5fP0e' in directory '/root'
2018-05-09 23:23:24,207 [salt.state       ][INFO    ][24025] {'nova-consoleproxy/daemon_type': 'novnc'}
2018-05-09 23:23:24,208 [salt.state       ][INFO    ][24025] Completed state [nova-consoleproxy] at time 23:23:24.207918 duration_in_ms=426.452
2018-05-09 23:23:24,214 [salt.state       ][INFO    ][24025] Running state [nova] at time 23:23:24.214552
2018-05-09 23:23:24,215 [salt.state       ][INFO    ][24025] Executing state group.present for nova
2018-05-09 23:23:24,216 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['groupadd', '-g 303', '-r', 'nova'] in directory '/root'
2018-05-09 23:23:24,243 [salt.state       ][INFO    ][24025] {'passwd': 'x', 'gid': 303, 'name': 'nova', 'members': []}
2018-05-09 23:23:24,244 [salt.state       ][INFO    ][24025] Completed state [nova] at time 23:23:24.244335 duration_in_ms=29.782
2018-05-09 23:23:24,246 [salt.state       ][INFO    ][24025] Running state [nova] at time 23:23:24.246229
2018-05-09 23:23:24,246 [salt.state       ][INFO    ][24025] Executing state user.present for nova
2018-05-09 23:23:24,248 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['useradd', '-s', '/bin/false', '-u', '303', '-g', '303', '-m', '-d', '/var/lib/nova', '-r', 'nova'] in directory '/root'
2018-05-09 23:23:24,278 [salt.state       ][INFO    ][24025] {'shell': '/bin/false', 'workphone': '', 'uid': 303, 'passwd': 'x', 'roomnumber': '', 'groups': ['nova'], 'home': '/var/lib/nova', 'name': 'nova', 'gid': 303, 'fullname': '', 'homephone': ''}
2018-05-09 23:23:24,279 [salt.state       ][INFO    ][24025] Completed state [nova] at time 23:23:24.278976 duration_in_ms=32.748
2018-05-09 23:23:24,280 [salt.state       ][INFO    ][24025] Running state [nova-api] at time 23:23:24.280248
2018-05-09 23:23:24,281 [salt.state       ][INFO    ][24025] Executing state pkg.installed for nova-api
2018-05-09 23:23:24,305 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['apt-cache', '-q', 'policy', 'nova-api'] in directory '/root'
2018-05-09 23:23:24,390 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:23:26,567 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:23:26,604 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-api'] in directory '/root'
2018-05-09 23:23:29,557 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232329532574
2018-05-09 23:23:29,579 [salt.minion      ][INFO    ][24419] Starting a new job with PID 24419
2018-05-09 23:23:29,601 [salt.minion      ][INFO    ][24419] Returning information for job: 20180509232329532574
2018-05-09 23:23:39,583 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232339562032
2018-05-09 23:23:39,604 [salt.minion      ][INFO    ][25022] Starting a new job with PID 25022
2018-05-09 23:23:39,621 [salt.minion      ][INFO    ][25022] Returning information for job: 20180509232339562032
2018-05-09 23:23:45,061 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:23:45,117 [salt.state       ][INFO    ][24025] Made the following changes:
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslo.versionedobjects' changed from 'absent' to '1.26.0-0ubuntu2~cloud0'
'python-pypowervm' changed from 'absent' to '1.1.6-0ubuntu2~cloud0'
'python-nova' changed from 'absent' to '2:16.1.2-0ubuntu1~cloud0'
'python-os-win' changed from 'absent' to '2.2.0-0ubuntu1~cloud0'
'python-os-traits' changed from 'absent' to '0.3.3-0ubuntu1~cloud0'
'python-os-vif' changed from 'absent' to '1.7.0-0ubuntu1~cloud0'
'nova-api' changed from 'absent' to '2:16.1.2-0ubuntu1~cloud0'
'nova-common' changed from 'absent' to '2:16.1.2-0ubuntu1~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.9.0-0ubuntu1~cloud0'
'python-os-brick' changed from 'absent' to '1.15.2-0ubuntu1~cloud0'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'os-brick-common' changed from 'absent' to '1.15.2-0ubuntu1~cloud0'
'python-microversion-parse' changed from 'absent' to '0.1.4-2~cloud0'
'python-oslo.reports' changed from 'absent' to '1.22.0-0ubuntu1~cloud0'
'python2.7-nova' changed from 'absent' to '1'
'python-os-xenapi' changed from 'absent' to '0.2.0-0ubuntu1~cloud0'
'python-voluptuous' changed from 'absent' to '0.9.3-1~cloud0'
'python-cffi' changed from 'absent' to '1.9.1-2build2~cloud0'
'python-ply-lex-3.5' changed from 'absent' to '1'
'python-paramiko' changed from 'absent' to '2.0.0-1ubuntu0.1~cloud0'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'python-tooz' changed from 'absent' to '1.58.0-0ubuntu1~cloud0'
'python-zake' changed from 'absent' to '0.1.6-1'
'python2.7-paramiko' changed from 'absent' to '1'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-pycparser' changed from 'absent' to '2.14+dfsg-2build1'
'python-ply-yacc-3.5' changed from 'absent' to '1'
'python-oslo.privsep' changed from 'absent' to '1.22.0-0ubuntu1~cloud0'
'python-ply' changed from 'absent' to '3.7-1'
'python2.7-ply' changed from 'absent' to '1'

2018-05-09 23:23:45,146 [salt.state       ][INFO    ][24025] Loading fresh modules for state activity
2018-05-09 23:23:45,178 [salt.state       ][INFO    ][24025] Completed state [nova-api] at time 23:23:45.178780 duration_in_ms=20898.532
2018-05-09 23:23:45,191 [salt.state       ][INFO    ][24025] Running state [nova-conductor] at time 23:23:45.191185
2018-05-09 23:23:45,191 [salt.state       ][INFO    ][24025] Executing state pkg.installed for nova-conductor
2018-05-09 23:23:45,662 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:23:45,689 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-conductor'] in directory '/root'
2018-05-09 23:23:49,021 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:23:49,074 [salt.state       ][INFO    ][24025] Made the following changes:
'nova-conductor' changed from 'absent' to '2:16.1.2-0ubuntu1~cloud0'

2018-05-09 23:23:49,096 [salt.state       ][INFO    ][24025] Loading fresh modules for state activity
2018-05-09 23:23:49,127 [salt.state       ][INFO    ][24025] Completed state [nova-conductor] at time 23:23:49.127564 duration_in_ms=3936.376
2018-05-09 23:23:49,139 [salt.state       ][INFO    ][24025] Running state [nova-consoleauth] at time 23:23:49.139809
2018-05-09 23:23:49,140 [salt.state       ][INFO    ][24025] Executing state pkg.installed for nova-consoleauth
2018-05-09 23:23:49,606 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:23:49,640 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-consoleauth'] in directory '/root'
2018-05-09 23:23:49,783 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232349768324
2018-05-09 23:23:49,798 [salt.minion      ][INFO    ][25786] Starting a new job with PID 25786
2018-05-09 23:23:49,816 [salt.minion      ][INFO    ][25786] Returning information for job: 20180509232349768324
2018-05-09 23:23:53,103 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:23:53,150 [salt.state       ][INFO    ][24025] Made the following changes:
'nova-consoleauth' changed from 'absent' to '2:16.1.2-0ubuntu1~cloud0'

2018-05-09 23:23:53,173 [salt.state       ][INFO    ][24025] Loading fresh modules for state activity
2018-05-09 23:23:53,203 [salt.state       ][INFO    ][24025] Completed state [nova-consoleauth] at time 23:23:53.203396 duration_in_ms=4063.587
2018-05-09 23:23:53,215 [salt.state       ][INFO    ][24025] Running state [nova-novncproxy] at time 23:23:53.215010
2018-05-09 23:23:53,215 [salt.state       ][INFO    ][24025] Executing state pkg.installed for nova-novncproxy
2018-05-09 23:23:53,657 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:23:53,690 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-novncproxy'] in directory '/root'
2018-05-09 23:23:57,771 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:23:57,822 [salt.state       ][INFO    ][24025] Made the following changes:
'nova-novncproxy' changed from 'absent' to '2:16.1.2-0ubuntu1~cloud0'
'python-novnc' changed from 'absent' to '1:0.4+dfsg+1+20131010+gitf68af8af3d-4'
'websockify' changed from 'absent' to '0.8.0+dfsg1-7ubuntu1~cloud0'
'websockify-common' changed from 'absent' to '0.8.0+dfsg1-7ubuntu1~cloud0'
'libjs-swfobject' changed from 'absent' to '2.2+dfsg-1'
'novnc' changed from 'absent' to '1:0.4+dfsg+1+20131010+gitf68af8af3d-4'
'python-websockify' changed from 'absent' to '0.8.0+dfsg1-7ubuntu1~cloud0'

2018-05-09 23:23:57,845 [salt.state       ][INFO    ][24025] Loading fresh modules for state activity
2018-05-09 23:23:57,879 [salt.state       ][INFO    ][24025] Completed state [nova-novncproxy] at time 23:23:57.879088 duration_in_ms=4664.077
2018-05-09 23:23:57,891 [salt.state       ][INFO    ][24025] Running state [nova-scheduler] at time 23:23:57.891840
2018-05-09 23:23:57,892 [salt.state       ][INFO    ][24025] Executing state pkg.installed for nova-scheduler
2018-05-09 23:23:58,454 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:23:58,488 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-scheduler'] in directory '/root'
2018-05-09 23:23:59,977 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232359958243
2018-05-09 23:23:59,992 [salt.minion      ][INFO    ][27151] Starting a new job with PID 27151
2018-05-09 23:24:00,015 [salt.minion      ][INFO    ][27151] Returning information for job: 20180509232359958243
2018-05-09 23:24:01,810 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:24:01,860 [salt.state       ][INFO    ][24025] Made the following changes:
'nova-scheduler' changed from 'absent' to '2:16.1.2-0ubuntu1~cloud0'

2018-05-09 23:24:01,882 [salt.state       ][INFO    ][24025] Loading fresh modules for state activity
2018-05-09 23:24:01,914 [salt.state       ][INFO    ][24025] Completed state [nova-scheduler] at time 23:24:01.913945 duration_in_ms=4022.102
2018-05-09 23:24:01,927 [salt.state       ][INFO    ][24025] Running state [python-novaclient] at time 23:24:01.927450
2018-05-09 23:24:01,927 [salt.state       ][INFO    ][24025] Executing state pkg.installed for python-novaclient
2018-05-09 23:24:02,328 [salt.state       ][INFO    ][24025] All specified packages are already installed
2018-05-09 23:24:02,329 [salt.state       ][INFO    ][24025] Completed state [python-novaclient] at time 23:24:02.329616 duration_in_ms=402.165
2018-05-09 23:24:02,332 [salt.state       ][INFO    ][24025] Running state [/etc/nova/nova.conf] at time 23:24:02.332304
2018-05-09 23:24:02,332 [salt.state       ][INFO    ][24025] Executing state file.managed for /etc/nova/nova.conf
2018-05-09 23:24:02,391 [salt.fileclient  ][INFO    ][24025] Fetching file from saltenv 'base', ** done ** 'nova/files/pike/nova-controller.conf.Debian'
2018-05-09 23:24:02,905 [salt.state       ][INFO    ][24025] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 [DEFAULT]
-log_dir = /var/log/nova
-lock_path = /var/lock/nova
-state_path = /var/lib/nova
 
 #
 # From nova.conf
 #
+image_service=nova.image.glance.GlanceImageService
 
 # DEPRECATED:
 # When returning instance metadata, this is the class that is used
@@ -18,7 +17,7 @@
 #  (string value)
 # This option is deprecated for removal since 13.0.0.
 # Its value may be silently ignored in the future.
-#vendordata_driver = nova.api.metadata.vendordata_json.JsonFileVendorData
+#vendordata_driver=nova.api.metadata.vendordata_json.JsonFileVendorData
 
 # DEPRECATED:
 # This option is used to enable or disable quota checking for tenant networks.
@@ -32,7 +31,7 @@
 # Reason:
 # CRUD operations on tenant networks are only available when using nova-network
 # and nova-network is itself deprecated.
-#enable_network_quota = false
+#enable_network_quota=false
 
 # DEPRECATED:
 # This option controls the number of private networks that can be created per
@@ -48,52 +47,40 @@
 # Reason:
 # CRUD operations on tenant networks are only available when using nova-network
 # and nova-network is itself deprecated.
-#quota_networks = 3
-
-#
-# Availability zone for internal services.
-#
-# This option determines the availability zone for the various internal nova
-# services, such as 'nova-scheduler', 'nova-conductor', etc.
-#
-# Possible values:
-#
-# * Any string representing an existing availability zone name.
-#  (string value)
-#internal_service_availability_zone = internal
-
-#
-# Default availability zone for compute services.
-#
-# This option determines the default availability zone for 'nova-compute'
-# services, which will be used if the service(s) do not belong to aggregates
-# with
-# availability zone metadata.
-#
-# Possible values:
-#
-# * Any string representing an existing availability zone name.
-#  (string value)
-#default_availability_zone = nova
-
-#
-# Default availability zone for instances.
-#
-# This option determines the default availability zone for instances, which will
-# be used when a user does not specify one when creating an instance. The
-# instance(s) will be bound to this availability zone for their lifetime.
-#
-# Possible values:
-#
-# * Any string representing an existing availability zone name.
-# * None, which means that the instance can move from one availability zone to
-#   another during its lifetime if it is moved from one compute node to another.
-#  (string value)
-#default_schedule_zone = <None>
+#quota_networks=3
+
+#
+# This option specifies the name of the availability zone for the
+# internal services. Services like nova-scheduler, nova-network,
+# nova-conductor are internal services. These services will appear in
+# their own internal availability_zone.
+#
+# Possible values:
+#
+# * Any string representing an availability zone name
+# * 'internal' is the default value
+#
+#  (string value)
+#internal_service_availability_zone=internal
+
+#
+# Default compute node availability_zone.
+#
+# This option determines the availability zone to be used when it is not
+# specified in the VM creation request. If this option is not set,
+# the default availability zone 'nova' is used.
+#
+# Possible values:
+#
+# * Any string representing an availability zone name
+# * 'nova' is the default value
+#
+#  (string value)
+#default_availability_zone=nova
 
 # Length of generated instance admin passwords. (integer value)
 # Minimum value: 0
-#password_length = 12
+#password_length=12
 
 #
 # Time period to generate instance usages for. It is possible to define optional
@@ -106,14 +93,15 @@
 # *  period with offset, example: ``month@15`` will result in monthly audits
 #    starting on 15th day of month.
 #  (string value)
-#instance_usage_audit_period = month
+#instance_usage_audit_period=month
+
 
 #
 # Start and use a daemon that can run the commands that need to be run with
 # root privileges. This option is usually enabled on nodes that run nova compute
 # processes.
 #  (boolean value)
-#use_rootwrap_daemon = false
+#use_rootwrap_daemon=false
 
 #
 # Path to the rootwrap configuration file.
@@ -123,10 +111,11 @@
 # The configuration file used here must match the one defined in the sudoers
 # entry.
 #  (string value)
-#rootwrap_config = /etc/nova/rootwrap.conf
+#rootwrap_config=/etc/nova/rootwrap.conf
+rootwrap_config=/etc/nova/rootwrap.conf
 
 # Explicitly specify the temporary working directory. (string value)
-#tempdir = <None>
+#tempdir=<None>
 
 #
 # Determine if monkey patching should be applied.
@@ -136,7 +125,7 @@
 # * ``monkey_patch_modules``: This must have values set for this option to
 #   have any effect
 #  (boolean value)
-#monkey_patch = false
+#monkey_patch=false
 
 #
 # List of modules/decorators to monkey patch.
@@ -155,7 +144,7 @@
 # * ``monkey_patch``: This must be set to ``True`` for this option to
 #   have any effect
 #  (list value)
-#monkey_patch_modules = nova.compute.api:nova.notifications.notify_decorator
+#monkey_patch_modules=nova.compute.api:nova.notifications.notify_decorator
 
 #
 # Defines which driver to use for controlling virtualization.
@@ -169,16 +158,30 @@
 # * ``vmwareapi.VMwareVCDriver``
 # * ``hyperv.HyperVDriver``
 #  (string value)
-#compute_driver = <None>
+#compute_driver=<None>
+compute_driver = libvirt.LibvirtDriver
 
 #
 # Allow destination machine to match source for resize. Useful when
 # testing in single-host environments. By default it is not allowed
 # to resize to the same host. Setting this option to true will add
-# the same host to the destination options. Also set to true
-# if you allow the ServerGroupAffinityFilter and need to resize.
+# the same host to the destination options.
 #  (boolean value)
-#allow_resize_to_same_host = false
+#allow_resize_to_same_host=false
+allow_resize_to_same_host=true
+
+#
+# Availability zone to use when user doesn't specify one.
+#
+# This option is used by the scheduler to determine which availability
+# zone to place a new VM instance into if the user did not specify one
+# at the time of VM boot request.
+#
+# Possible values:
+#
+# * Any string representing an availability zone name
+# * Default value is None.
+#  (string value)
 
 #
 # Image properties that should not be inherited from the instance
@@ -195,7 +198,7 @@
 #   doesn't need them.
 # * Default list: ['cache_in_nova', 'bittorrent']
 #  (list value)
-#non_inheritable_image_properties = cache_in_nova,bittorrent
+#non_inheritable_image_properties=cache_in_nova,bittorrent
 
 # DEPRECATED:
 # This option is used to decide when an image should have no external
@@ -211,7 +214,7 @@
 # 'nokernel', Nova assumes the image doesn't require an external kernel and
 # ramdisk. This option allows user to change the API behaviour which should not
 # be allowed and this value "nokernel" should be hard coded.
-#null_kernel = nokernel
+#null_kernel=nokernel
 
 # DEPRECATED:
 # When creating multiple instances with a single request using the
@@ -229,7 +232,7 @@
 # Reason:
 # This config changes API behaviour. All changes in API behaviour should be
 # discoverable.
-#multi_instance_display_name_template = %(name)s-%(count)d
+#multi_instance_display_name_template=%(name)s-%(count)d
 
 #
 # Maximum number of devices that will result in a local image being
@@ -251,7 +254,7 @@
 # * Positive number: Allows only these many number of local discs.
 #                        (Default value is 3).
 #  (integer value)
-#max_local_block_devices = 3
+#max_local_block_devices=3
 
 #
 # A list of monitors that can be used for getting compute metrics.
@@ -279,7 +282,7 @@
 # * ``xfs``
 # * ``ntfs`` (only for Windows guests)
 #  (string value)
-#default_ephemeral_format = <None>
+#default_ephemeral_format=<None>
 
 #
 # Determine if instance should boot or fail on VIF plugging timeout.
@@ -300,7 +303,8 @@
 # * True: Instances should fail after VIF plugging timeout
 # * False: Instances should continue booting after VIF plugging timeout
 #  (boolean value)
-#vif_plugging_is_fatal = true
+#vif_plugging_is_fatal=true
+vif_plugging_is_fatal=false
 
 #
 # Timeout for Neutron VIF plugging event message arrival.
@@ -315,7 +319,8 @@
 #   arrive at all.
 #  (integer value)
 # Minimum value: 0
-#vif_plugging_timeout = 300
+#vif_plugging_timeout=300
+vif_plugging_timeout=0
 
 # Path to '/etc/network/interfaces' template.
 #
@@ -343,7 +348,8 @@
 # * ``flat_inject``: This must be set to ``True`` to ensure nova embeds network
 #   configuration information in the metadata provided through the config drive.
 #  (string value)
-#injected_network_template = $pybasedir/nova/virt/interfaces.template
+#injected_network_template=$pybasedir/nova/virt/interfaces.template
+injected_network_template=$pybasedir/nova/virt/interfaces.template
 
 #
 # The image preallocation mode to use.
@@ -361,7 +367,7 @@
 # * "space" => storage is fully allocated at instance start
 #  (string value)
 # Allowed values: none, space
-#preallocate_images = none
+#preallocate_images=none
 
 #
 # Enable use of copy-on-write (cow) images.
@@ -369,7 +375,7 @@
 # QEMU/KVM allow the use of qcow2 as backing files. By disabling this,
 # backing files will not be used.
 #  (boolean value)
-#use_cow_images = true
+#use_cow_images=true
 
 #
 # Force conversion of backing images to raw format.
@@ -383,7 +389,7 @@
 #
 # * ``compute_driver``: Only the libvirt driver uses this option.
 #  (boolean value)
-#force_raw_images = true
+#force_raw_images=true
 
 #
 # Name of the mkfs commands for ephemeral device.
@@ -400,11 +406,11 @@
 # contains a recent version of cloud-init. Possible mechanisms require the nbd
 # driver (for qcow and raw), or loop (for raw).
 #  (boolean value)
-#resize_fs_using_block_device = false
+#resize_fs_using_block_device=false
 
 # Amount of time, in seconds, to wait for NBD device start up. (integer value)
 # Minimum value: 0
-#timeout_nbd = 10
+#timeout_nbd=10
 
 #
 # Location of cached images.
@@ -412,15 +418,15 @@
 # This is NOT the full path - just a folder name relative to '$instances_path'.
 # For per-compute-host cached images, set to '_base_$my_ip'
 #  (string value)
-#image_cache_subdirectory_name = _base
+#image_cache_subdirectory_name=_base
 
 # Should unused base images be removed? (boolean value)
-#remove_unused_base_images = true
+#remove_unused_base_images=true
 
 #
 # Unused unresized base images younger than this will not be removed.
 #  (integer value)
-#remove_unused_original_minimum_age_seconds = 86400
+#remove_unused_original_minimum_age_seconds=86400
 
 #
 # Generic property to specify the pointer type.
@@ -445,7 +451,7 @@
 #   configured as HVM.
 #   (string value)
 # Allowed values: <None>, ps2mouse, usbtablet
-#pointer_model = usbtablet
+#pointer_model=usbtablet
 
 #
 # Defines which physical CPUs (pCPUs) can be used by instance
@@ -460,7 +466,7 @@
 #
 #     vcpu_pin_set = "4-12,^8,15"
 #  (string value)
-#vcpu_pin_set = <None>
+#vcpu_pin_set=<None>
 
 #
 # Number of huge/large memory pages to reserved per NUMA host cell.
@@ -476,7 +482,7 @@
 #   In this example we are reserving on NUMA node 0 64 pages of 2MiB
 #   and on NUMA node 1 1 page of 1GiB.
 #  (dict value)
-#reserved_huge_pages = <None>
+#reserved_huge_pages=<None>
 
 #
 # Amount of disk resources in MB to make them always available to host. The
@@ -490,7 +496,7 @@
 #   for the host.
 #  (integer value)
 # Minimum value: 0
-#reserved_host_disk_mb = 0
+#reserved_host_disk_mb=0
 
 #
 # Amount of memory in MB to reserve for the host so that it is always available
@@ -506,21 +512,7 @@
 #   for the host.
 #  (integer value)
 # Minimum value: 0
-#reserved_host_memory_mb = 512
-
-#
-# Number of physical CPUs to reserve for the host. The host resources usage is
-# reported back to the scheduler continuously from nova-compute running on the
-# compute node. To prevent the host CPU from being considered as available,
-# this option is used to reserve random pCPU(s) for the host.
-#
-# Possible values:
-#
-# * Any positive integer representing number of physical CPUs to reserve
-#   for the host.
-#  (integer value)
-# Minimum value: 0
-#reserved_host_cpus = 0
+#reserved_host_memory_mb=512
 
 #
 # This option helps you specify virtual CPU to physical CPU allocation ratio.
@@ -536,17 +528,15 @@
 #
 # NOTE: This can be set per-compute, or if set to 0.0, the value
 # set on the scheduler node(s) or compute node(s) will be used
-# and defaulted to 16.0.
-#
-# NOTE: As of the 16.0.0 Pike release, this configuration option is ignored
-# for the ironic.IronicDriver compute driver and is hardcoded to 1.0.
+# and defaulted to 16.0'.
 #
 # Possible values:
 #
 # * Any valid positive integer or float value
 #  (floating point value)
 # Minimum value: 0
-#cpu_allocation_ratio = 0.0
+#cpu_allocation_ratio=0.0
+cpu_allocation_ratio=16.0
 
 #
 # This option helps you specify virtual RAM to physical RAM
@@ -565,15 +555,13 @@
 # set on the scheduler node(s) or compute node(s) will be used and
 # defaulted to 1.5.
 #
-# NOTE: As of the 16.0.0 Pike release, this configuration option is ignored
-# for the ironic.IronicDriver compute driver and is hardcoded to 1.0.
-#
 # Possible values:
 #
 # * Any valid positive integer or float value
 #  (floating point value)
 # Minimum value: 0
-#ram_allocation_ratio = 0.0
+#ram_allocation_ratio=0.0
+ram_allocation_ratio = 1.5
 
 #
 # This option helps you specify virtual disk to physical disk
@@ -594,17 +582,15 @@
 #
 # NOTE: This can be set per-compute, or if set to 0.0, the value
 # set on the scheduler node(s) or compute node(s) will be used and
-# defaulted to 1.0.
-#
-# NOTE: As of the 16.0.0 Pike release, this configuration option is ignored
-# for the ironic.IronicDriver compute driver and is hardcoded to 1.0.
+# defaulted to 1.0'.
 #
 # Possible values:
 #
 # * Any valid positive integer or float value
 #  (floating point value)
 # Minimum value: 0
-#disk_allocation_ratio = 0.0
+#disk_allocation_ratio=0.0
+disk_allocation_ratio = 1.0
 
 #
 # Console proxy host to be used to connect to instances on this host. It is the
@@ -614,7 +600,7 @@
 #
 # * Current hostname (default) or any string representing hostname.
 #  (string value)
-#console_host = <current_hostname>
+#console_host=socket.gethostname()
 
 #
 # Name of the network to be used to set access IPs for instances. If there are
@@ -625,13 +611,13 @@
 # * None (default)
 # * Any string representing network name.
 #  (string value)
-#default_access_ip_network_name = <None>
+#default_access_ip_network_name=<None>
 
 #
 # Whether to batch up the application of IPTables rules during a host restart
 # and apply all at the end of the init phase.
 #  (boolean value)
-#defer_iptables_apply = false
+#defer_iptables_apply=false
 
 #
 # Specifies where instances are stored on the hypervisor's disk.
@@ -643,14 +629,15 @@
 #   the top-level directory for maintaining nova's state. (default) or
 #   Any string representing directory path.
 #  (string value)
-#instances_path = $state_path/instances
+#instances_path=$state_path/instances
 
 #
 # This option enables periodic compute.instance.exists notifications. Each
 # compute node must be configured to generate system usage data. These
 # notifications are consumed by OpenStack Telemetry service.
 #  (boolean value)
-#instance_usage_audit = false
+#instance_usage_audit=false
+
 
 #
 # Maximum number of 1 second retries in live_migration. It specifies number
@@ -663,14 +650,7 @@
 # * Any positive integer representing retry count.
 #  (integer value)
 # Minimum value: 0
-#live_migration_retry_count = 30
-
-#
-# This option specifies whether to start guests that were running before the
-# host rebooted. It ensures that all of the instances on a Nova compute node
-# resume their state each time the compute node boots or restarts.
-#  (boolean value)
-#resume_guests_state_on_host_boot = false
+#live_migration_retry_count=30
 
 #
 # Number of times to retry network allocation. It is required to attempt network
@@ -681,7 +661,7 @@
 # * Any positive integer representing retry count.
 #  (integer value)
 # Minimum value: 0
-#network_allocate_retries = 0
+#network_allocate_retries=0
 
 #
 # Limits the maximum number of instance builds to run concurrently by
@@ -696,7 +676,7 @@
 # * Any positive integer representing maximum concurrent builds.
 #  (integer value)
 # Minimum value: 0
-#max_concurrent_builds = 10
+#max_concurrent_builds=10
 
 #
 # Maximum number of live migrations to run concurrently. This limit is enforced
@@ -711,7 +691,7 @@
 # * Any positive integer representing maximum number of live migrations
 #   to run concurrently.
 #  (integer value)
-#max_concurrent_live_migrations = 1
+#max_concurrent_live_migrations=1
 
 #
 # Number of times to retry block device allocation on failures. Starting with
@@ -726,7 +706,8 @@
 # * Any negative value is treated as 0.
 # * For any value > 0, total attempts are (value + 1)
 #  (integer value)
-#block_device_allocate_retries = 60
+#block_device_allocate_retries=60
+block_device_allocate_retries=600
 
 #
 # Number of greenthreads available for use to sync power states.
@@ -739,7 +720,7 @@
 #
 # * Any positive integer representing greenthreads count.
 #  (integer value)
-#sync_power_state_pool_size = 1000
+#sync_power_state_pool_size=1000
 
 #
 # Number of seconds to wait between runs of the image cache manager.
@@ -750,7 +731,7 @@
 # * Any other value
 #  (integer value)
 # Minimum value: -1
-#image_cache_manager_interval = 2400
+#image_cache_manager_interval=2400
 
 #
 # Interval to pull network bandwidth usage info.
@@ -764,7 +745,7 @@
 # * Any value < 0: Disables the option.
 # * Any positive integer in seconds.
 #  (integer value)
-#bandwidth_poll_interval = 600
+#bandwidth_poll_interval=600
 
 #
 # Interval to sync power states between the database and the hypervisor.
@@ -789,7 +770,7 @@
 #   of sync between the hypervisor and the Nova database will have
 #   to be synchronized manually.
 #  (integer value)
-#sync_power_state_interval = 600
+#sync_power_state_interval=600
 
 #
 # Interval between instance network information cache updates.
@@ -807,7 +788,7 @@
 # * Any positive integer in seconds.
 # * Any value <=0 will disable the sync. This is not recommended.
 #  (integer value)
-#heal_instance_info_cache_interval = 60
+#heal_instance_info_cache_interval=60
 
 #
 # Interval for reclaiming deleted instances.
@@ -833,7 +814,7 @@
 #   this option.
 # * Any value <=0 will disable the option.
 #  (integer value)
-#reclaim_instance_interval = 0
+#reclaim_instance_interval=0
 
 #
 # Interval for gathering volume usages.
@@ -847,7 +828,7 @@
 #   this option.
 # * Any value <=0 will disable the option.
 #  (integer value)
-#volume_usage_poll_interval = 0
+#volume_usage_poll_interval=0
 
 #
 # Interval for polling shelved instances to offload.
@@ -867,7 +848,7 @@
 #
 # * ``shelved_offload_time``
 #  (integer value)
-#shelved_poll_interval = 3600
+#shelved_poll_interval=3600
 
 #
 # Time before a shelved instance is eligible for removal from a host.
@@ -887,7 +868,7 @@
 # * Any positive integer in seconds: The instance will exist for
 #   the specified number of seconds before being offloaded.
 #  (integer value)
-#shelved_offload_time = 0
+#shelved_offload_time=0
 
 #
 # Interval for retrying failed instance file deletes.
@@ -908,7 +889,7 @@
 # * ``maximum_instance_delete_attempts`` from instance_cleaning_opts
 #   group.
 #  (integer value)
-#instance_delete_interval = 300
+#instance_delete_interval=300
 
 #
 # Interval (in seconds) between block device allocation retries on failures.
@@ -927,7 +908,8 @@
 # * ``block_device_allocate_retries`` in compute_manager_opts group.
 #  (integer value)
 # Minimum value: 0
-#block_device_allocate_retries_interval = 3
+#block_device_allocate_retries_interval=3
+block_device_allocate_retries_interval=10
 
 #
 # Interval between sending the scheduler a list of current instance UUIDs to
@@ -953,7 +935,7 @@
 # * This option has no impact if ``scheduler_tracks_instance_changes``
 #   is set to False.
 #  (integer value)
-#scheduler_instance_sync_interval = 120
+#scheduler_instance_sync_interval=120
 
 #
 # Interval for updating compute resources.
@@ -970,7 +952,7 @@
 # * Any value < 0: Disables the option.
 # * Any positive integer in seconds.
 #  (integer value)
-#update_resources_interval = 0
+#update_resources_interval=0
 
 #
 # Time interval after which an instance is hard rebooted automatically.
@@ -987,7 +969,7 @@
 # * Any positive integer in seconds: Enables the option.
 #  (integer value)
 # Minimum value: 0
-#reboot_timeout = 0
+#reboot_timeout=0
 
 #
 # Maximum time in seconds that an instance can take to build.
@@ -1002,7 +984,7 @@
 # * Any positive integer in seconds: Enables the option.
 #  (integer value)
 # Minimum value: 0
-#instance_build_timeout = 0
+#instance_build_timeout=0
 
 #
 # Interval to wait before un-rescuing an instance stuck in RESCUE.
@@ -1013,7 +995,7 @@
 # * Any positive integer in seconds: Enables the option.
 #  (integer value)
 # Minimum value: 0
-#rescue_timeout = 0
+#rescue_timeout=0
 
 #
 # Automatically confirm resizes after N seconds.
@@ -1032,7 +1014,7 @@
 # * Any positive integer in seconds: Enables the option.
 #  (integer value)
 # Minimum value: 0
-#resize_confirm_window = 0
+#resize_confirm_window=0
 
 #
 # Total time to wait in seconds for an instance toperform a clean
@@ -1054,7 +1036,7 @@
 # * Any positive integer in seconds (default value is 60).
 #  (integer value)
 # Minimum value: 1
-#shutdown_timeout = 60
+#shutdown_timeout=60
 
 #
 # The compute service periodically checks for instances that have been
@@ -1072,11 +1054,11 @@
 #
 # Related options:
 #
-# * running_deleted_instance_poll_interval
+# * running_deleted_instance_poll
 # * running_deleted_instance_timeout
 #  (string value)
 # Allowed values: noop, log, shutdown, reap
-#running_deleted_instance_action = reap
+#running_deleted_instance_action=reap
 
 #
 # Time interval in seconds to wait between runs for the clean up action.
@@ -1093,7 +1075,7 @@
 #
 # * running_deleted_instance_action
 #  (integer value)
-#running_deleted_instance_poll_interval = 1800
+#running_deleted_instance_poll_interval=1800
 
 #
 # Time interval in seconds to wait for the instances that have
@@ -1107,7 +1089,7 @@
 #
 # * "running_deleted_instance_action"
 #  (integer value)
-#running_deleted_instance_timeout = 0
+#running_deleted_instance_timeout=0
 
 #
 # The number of times to attempt to reap an instance's files.
@@ -1125,7 +1107,25 @@
 # * ``instance_delete_interval`` in interval_opts group can be used to disable
 #   this option.
 #  (integer value)
-#maximum_instance_delete_attempts = 5
+#maximum_instance_delete_attempts=5
+
+# DEPRECATED:
+# This is the message queue topic that the compute service 'listens' on. It is
+# used when the compute service is started up to configure the queue, and
+# whenever an RPC call to the compute service is made.
+#
+# Possible values:
+#
+# * Any string, but there is almost never any reason to ever change this value
+#   from its default of 'compute'.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# There is no need to let users choose the RPC topic for all services - there
+# is little gain from this. Furthermore, it makes it really easy to break Nova
+# by using this option.
+#compute_topic=compute
 
 #
 # Sets the scope of the check for unique instance names.
@@ -1150,24 +1150,21 @@
 #osapi_compute_unique_server_name_scope =
 
 #
-# Enable new nova-compute services on this host automatically.
-#
-# When a new nova-compute service starts up, it gets
+# Enable new services on this host automatically.
+#
+# When a new service (for example "nova-compute") starts up, it gets
 # registered in the database as an enabled service. Sometimes it can be useful
-# to register new compute services in disabled state and then enabled them at a
-# later point in time. This option only sets this behavior for nova-compute
-# services, it does not auto-disable other services like nova-conductor,
-# nova-scheduler, nova-consoleauth, or nova-osapi_compute.
-#
-# Possible values:
-#
-# * ``True``: Each new compute service is enabled as soon as it registers
-# itself.
-# * ``False``: Compute services must be enabled via an os-services REST API call
-#   or with the CLI with ``nova service-enable <hostname> <binary>``, otherwise
-#   they are not ready to use.
+# to register new services in disabled state and then enabled them at a later
+# point in time. This option can set this behavior for all services per host.
+#
+# Possible values:
+#
+# * ``True``: Each new service is enabled as soon as it registers itself.
+# * ``False``: Services must be enabled via a REST API call or with the CLI
+#   with ``nova service-enable <hostname> <binary>``, otherwise they are not
+#   ready to use.
 #  (boolean value)
-#enable_new_services = true
+#enable_new_services=true
 
 #
 # Template string to be used to generate instance names.
@@ -1191,7 +1188,7 @@
 #
 # * not to be confused with: ``multi_instance_display_name_template``
 #  (string value)
-#instance_name_template = instance-%08x
+#instance_name_template=instance-%08x
 
 #
 # Number of times to retry live-migration before failing.
@@ -1203,7 +1200,7 @@
 # * Integer greater than 0
 #  (integer value)
 # Minimum value: -1
-#migrate_max_retries = -1
+#migrate_max_retries=-1
 
 #
 # Configuration drive format
@@ -1234,7 +1231,7 @@
 #   drive, set config_drive_cdrom option at hyperv section, to true.
 #  (string value)
 # Allowed values: iso9660, vfat
-#config_drive_format = iso9660
+#config_drive_format=iso9660
 
 #
 # Force injection to take place on a config drive
@@ -1261,7 +1258,7 @@
 #   configuration section to the full path to an qemu-img command
 #   installation.
 #  (boolean value)
-#force_config_drive = false
+#force_config_drive=false
 
 #
 # Name or path of the tool used for ISO image creation
@@ -1288,12 +1285,68 @@
 #   value in the hyperv configuration section to the full path to an qemu-img
 #   command installation.
 #  (string value)
-#mkisofs_cmd = genisoimage
+#mkisofs_cmd=genisoimage
+
+# DEPRECATED:
+# nova-console-proxy is used to set up multi-tenant VM console access.
+# This option allows pluggable driver program for the console session
+# and represents driver to use for the console proxy.
+#
+# Possible values:
+#
+# * A string representing fully classified class name of console driver.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option no longer does anything. Previously this option had only two
+# valid,
+# in-tree values: nova.console.xvp.XVPConsoleProxy and
+# nova.console.fake.FakeConsoleProxy. The latter of these was only used in tests
+# and has since been replaced.
+#console_driver=nova.console.xvp.XVPConsoleProxy
+
+# DEPRECATED:
+# Represents the message queue topic name used by nova-console
+# service when communicating via the AMQP server. The Nova API uses a message
+# queue to communicate with nova-console to retrieve a console URL for that
+# host.
+#
+# Possible values:
+#
+# * A string representing topic exchange name
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# There is no need to let users choose the RPC topic for all services - there
+# is little gain from this. Furthermore, it makes it really easy to break Nova
+# by using this option.
+#console_topic=console
+
+# DEPRECATED:
+# This option allows you to change the message topic used by nova-consoleauth
+# service when communicating via the AMQP server. Nova Console Authentication
+# server authenticates nova consoles. Users can then access their instances
+# through VNC clients. The Nova API service uses a message queue to
+# communicate with nova-consoleauth to get a VNC console.
+#
+# Possible Values:
+#
+# * 'consoleauth' (default) or Any string representing topic exchange name.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# There is no need to let users choose the RPC topic for all services - there
+# is little gain from this. Furthermore, it makes it really easy to break Nova
+# by using this option.
+#consoleauth_topic=consoleauth
 
 # DEPRECATED: The driver to use for database access (string value)
 # This option is deprecated for removal since 13.0.0.
 # Its value may be silently ignored in the future.
-#db_driver = nova.db
+#db_driver=nova.db
 
 # DEPRECATED:
 # Default flavor to use for the EC2 API only.
@@ -1302,9 +1355,108 @@
 # This option is deprecated for removal since 14.0.0.
 # Its value may be silently ignored in the future.
 # Reason: The EC2 API is deprecated.
-#default_flavor = m1.small
+#default_flavor=m1.small
+
+#
+# Default pool for floating IPs.
+#
+# This option specifies the default floating IP pool for allocating floating
+# IPs.
+#
+# While allocating a floating ip, users can optionally pass in the name of the
+# pool they want to allocate from, otherwise it will be pulled from the
+# default pool.
+#
+# If this option is not set, then 'nova' is used as default floating pool.
+#
+# Possible values:
+#
+# * Any string representing a floating IP pool name
+#  (string value)
+#default_floating_pool=nova
 
 # DEPRECATED:
+# Autoassigning floating IP to VM
+#
+# When set to True, floating IP is auto allocated and associated
+# to the VM upon creation.
+#
+# Related options:
+#
+# * use_neutron: this options only works with nova-network.
+#  (boolean value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#auto_assign_floating_ip=false
+use_neutron = True
+
+# DEPRECATED:
+# Full class name for the DNS Manager for floating IPs.
+#
+# This option specifies the class of the driver that provides functionality
+# to manage DNS entries associated with floating IPs.
+#
+# When a user adds a DNS entry for a specified domain to a floating IP,
+# nova will add a DNS entry using the specified floating DNS driver.
+# When a floating IP is deallocated, its DNS entry will automatically be
+# deleted.
+#
+# Possible values:
+#
+# * Full Python path to the class to be used
+#
+# Related options:
+#
+# * use_neutron: this options only works with nova-network.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#floating_ip_dns_manager=nova.network.noop_dns_driver.NoopDNSDriver
+
+# DEPRECATED:
+# Full class name for the DNS Manager for instance IPs.
+#
+# This option specifies the class of the driver that provides functionality
+# to manage DNS entries for instances.
+#
+# On instance creation, nova will add DNS entries for the instance name and
+# id, using the specified instance DNS driver and domain. On instance deletion,
+# nova will remove the DNS entries.
+#
+# Possible values:
+#
+# * Full Python path to the class to be used
+#
+# Related options:
+#
+# * use_neutron: this options only works with nova-network.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#instance_dns_manager=nova.network.noop_dns_driver.NoopDNSDriver
+
+# DEPRECATED:
+# If specified, Nova checks if the availability_zone of every instance matches
+# what the database says the availability_zone should be for the specified
+# dns_domain.
+#
+# Related options:
+#
+# * use_neutron: this options only works with nova-network.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# nova-network is deprecated, as are any related configuration options.
+#instance_dns_domain =
+
+#
 # Abstracts out IPv6 address generation to pluggable backends.
 #
 # nova-network can be put into dual-stack mode, so that it uses
@@ -1318,11 +1470,7 @@
 # * use_ipv6: this option only works if ipv6 is enabled for nova-network.
 #  (string value)
 # Allowed values: rfc2462, account_identifier
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ipv6_backend = rfc2462
+#ipv6_backend=rfc2462
 
 #
 # The IP address which the host is using to connect to the management network.
@@ -1338,7 +1486,8 @@
 # * routing_source_ip
 # * vpn_ip
 #  (string value)
-#my_ip = <host_ipv4>
+#my_ip=10.89.104.70
+my_ip=172.16.10.36
 
 #
 # The IP address which is used to connect to the block storage network.
@@ -1351,41 +1500,27 @@
 #
 # * my_ip - if my_block_storage_ip is not set, then my_ip value is used.
 #  (string value)
-#my_block_storage_ip = $my_ip
-
-#
-# Hostname, FQDN or IP address of this host.
-#
-# Used as:
-#
-# * the oslo.messaging queue name for nova-compute worker
-# * we use this value for the binding_host sent to neutron. This means if you
-# use
-#   a neutron agent, it should have the same value for host.
-# * cinder host attachment information
-#
-# Must be valid within AMQP key.
+#my_block_storage_ip=$my_ip
+
+#
+# Hostname, FQDN or IP address of this host. Must be valid within AMQP key.
 #
 # Possible values:
 #
 # * String with hostname, FQDN or IP address. Default is hostname of this host.
 #  (string value)
-#host = <current_hostname>
-
-# DEPRECATED:
+#host=lcy01-22
+
+#
 # Assign IPv6 and IPv4 addresses when creating instances.
 #
 # Related options:
 #
 # * use_neutron: this only works with nova-network.
 #  (boolean value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#use_ipv6 = false
-
-# DEPRECATED:
+#use_ipv6=false
+
+#
 # This option is a list of full paths to one or more configuration files for
 # dhcpbridge. In most cases the default path of '/etc/nova/nova-dhcpbridge.conf'
 # should be sufficient, but if you have special needs for configuring
@@ -1394,16 +1529,12 @@
 #
 # Possible values
 #
-# * A list of strings, where each string is the full path to a dhcpbridge
-#   configuration file.
+#     A list of strings, where each string is the full path to a dhcpbridge
+#     configuration file.
 #  (multi valued)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#dhcpbridge_flagfile = /etc/nova/nova-dhcpbridge.conf
-
-# DEPRECATED:
+dhcpbridge_flagfile=/etc/nova/nova.conf
+
+#
 # The location where the network configuration files will be kept. The default
 # is
 # the 'networks' directory off of the location where nova's Python module is
@@ -1411,76 +1542,55 @@
 #
 # Possible values
 #
-# * A string containing the full path to the desired configuration directory
-#  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#networks_path = $state_path/networks
-
-# DEPRECATED:
+#     A string containing the full path to the desired configuration directory
+#  (string value)
+#networks_path=$state_path/networks
+
+#
 # This is the name of the network interface for public IP addresses. The default
 # is 'eth0'.
 #
 # Possible values:
 #
-# * Any string representing a network interface name
-#  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#public_interface = eth0
-
-# DEPRECATED:
+#     Any string representing a network interface name
+#  (string value)
+#public_interface=eth0
+
+#
 # The location of the binary nova-dhcpbridge. By default it is the binary named
 # 'nova-dhcpbridge' that is installed with all the other nova binaries.
 #
 # Possible values:
 #
-# * Any string representing the full path to the binary for dhcpbridge
-#  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#dhcpbridge = $bindir/nova-dhcpbridge
-
-# DEPRECATED:
-# The public IP address of the network host.
-#
-# This is used when creating an SNAT rule.
-#
-# Possible values:
-#
-# * Any valid IP address
-#
-# Related options:
-#
-# * ``force_snat_range``
-#  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#routing_source_ip = $my_ip
-
-# DEPRECATED:
+#     Any string representing the full path to the binary for dhcpbridge
+#  (string value)
+dhcpbridge=/usr/bin/nova-dhcpbridge
+
+#
+# This is the public IP address of the network host. It is used when creating a
+# SNAT rule.
+#
+# Possible values:
+#
+#     Any valid IP address
+#
+# Related options:
+#
+#     force_snat_range
+#  (string value)
+#routing_source_ip=$my_ip
+
+#
 # The lifetime of a DHCP lease, in seconds. The default is 86400 (one day).
 #
 # Possible values:
 #
-# * Any positive integer value.
+#     Any positive integer value.
 #  (integer value)
 # Minimum value: 1
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#dhcp_lease_time = 86400
-
-# DEPRECATED:
+#dhcp_lease_time=86400
+
+#
 # Despite the singular form of the name of this option, it is actually a list of
 # zero or more server addresses that dnsmasq will use for DNS nameservers. If
 # this is not empty, dnsmasq will not read /etc/resolv.conf, but will only use
@@ -1491,19 +1601,15 @@
 #
 # Possible values:
 #
-# * A list of strings, where each string is either an IP address or a FQDN.
-#
-# Related options:
-#
-# * ``use_network_dns_servers``
+#     A list of strings, where each string is either an IP address or a FQDN.
+#
+# Related options:
+#
+#     use_network_dns_servers
 #  (multi valued)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
 #dns_server =
 
-# DEPRECATED:
+#
 # When this option is set to True, the dns1 and dns2 servers for the network
 # specified by the user on boot will be used for DNS, as well as any specified
 # in
@@ -1511,62 +1617,46 @@
 #
 # Related options:
 #
-# * ``dns_server``
+#     dns_server
 #  (boolean value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#use_network_dns_servers = false
-
-# DEPRECATED:
+#use_network_dns_servers=false
+
+#
 # This option is a list of zero or more IP address ranges in your network's DMZ
 # that should be accepted.
 #
 # Possible values:
 #
-# * A list of strings, each of which should be a valid CIDR.
+#     A list of strings, each of which should be a valid CIDR.
 #  (list value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
 #dmz_cidr =
 
-# DEPRECATED:
+#
 # This is a list of zero or more IP ranges that traffic from the
 # `routing_source_ip` will be SNATted to. If the list is empty, then no SNAT
 # rules are created.
 #
 # Possible values:
 #
-# * A list of strings, each of which should be a valid CIDR.
-#
-# Related options:
-#
-# * ``routing_source_ip``
+#     A list of strings, each of which should be a valid CIDR.
+#
+# Related options:
+#
+#     routing_source_ip
 #  (multi valued)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
 #force_snat_range =
 
-# DEPRECATED:
+#
 # The path to the custom dnsmasq configuration file, if any.
 #
 # Possible values:
 #
-# * The full path to the configuration file, or an empty string if there is no
-#   custom dnsmasq configuration file.
-#  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
+#     The full path to the configuration file, or an empty string if there is no
+#     custom dnsmasq configuration file.
+#  (string value)
 #dnsmasq_config_file =
 
-# DEPRECATED:
+#
 # This is the class used as the ethernet device driver for linuxnet bridge
 # operations. The default value should be all you need for most cases, but if
 # you
@@ -1575,27 +1665,19 @@
 #
 # Possible values:
 #
-# * Any string representing a dot-separated class path that Nova can import.
-#  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#linuxnet_interface_driver = nova.network.linux_net.LinuxBridgeInterfaceDriver
-
-# DEPRECATED:
+#     Any string representing a dot-separated class path that Nova can import.
+#  (string value)
+#linuxnet_interface_driver=nova.network.linux_net.LinuxBridgeInterfaceDriver
+
+#
 # The name of the Open vSwitch bridge that is used with linuxnet when connecting
 # with Open vSwitch."
 #
 # Possible values:
 #
-# * Any string representing a valid bridge name.
-#  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#linuxnet_ovs_integration_bridge = br-int
+#     Any string representing a valid bridge name.
+#  (string value)
+#linuxnet_ovs_integration_bridge=br-int
 
 #
 # When True, when a device starts up, and upon binding floating IP addresses,
@@ -1605,9 +1687,9 @@
 #
 # Related options:
 #
-# * ``send_arp_for_ha_count``
+#     send_arp_for_ha_count
 #  (boolean value)
-#send_arp_for_ha = false
+#send_arp_for_ha=false
 
 #
 # When arp messages are configured to be sent, they will be sent with the count
@@ -1616,108 +1698,84 @@
 #
 # Possible values:
 #
-# * Any integer greater than or equal to 0
-#
-# Related options:
-#
-# * ``send_arp_for_ha``
-#  (integer value)
-#send_arp_for_ha_count = 3
-
-# DEPRECATED:
+#     Any integer greater than or equal to 0
+#
+# Related options:
+#
+#     send_arp_for_ha
+#  (integer value)
+#send_arp_for_ha_count=3
+
+#
 # When set to True, only the firt nic of a VM will get its default gateway from
 # the DHCP server.
 #  (boolean value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#use_single_default_gateway = false
-
-# DEPRECATED:
+#use_single_default_gateway=false
+
+#
 # One or more interfaces that bridges can forward traffic to. If any of the
 # items
 # in this list is the special keyword 'all', then all traffic will be forwarded.
 #
 # Possible values:
 #
-# * A list of zero or more interface names, or the word 'all'.
+#     A list of zero or more interface names, or the word 'all'.
 #  (multi valued)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#forward_bridge_interface = all
+#forward_bridge_interface=all
 
 #
 # This option determines the IP address for the network metadata API server.
 #
-# This is really the client side of the metadata host equation that allows
-# nova-network to find the metadata server when doing a default multi host
-# networking.
-#
-# Possible values:
-#
-# * Any valid IP address. The default is the address of the Nova API server.
-#
-# Related options:
-#
-# * ``metadata_port``
-#  (string value)
-#metadata_host = $my_ip
-
-# DEPRECATED:
+# Possible values:
+#
+#    * Any valid IP address. The default is the address of the Nova API server.
+#
+# Related options:
+#
+#     * metadata_port
+#  (string value)
+#metadata_host=$my_ip
+
+#
 # This option determines the port used for the metadata API server.
 #
 # Related options:
 #
-# * ``metadata_host``
+#     * metadata_host
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#metadata_port = 8775
-
-# DEPRECATED:
+#metadata_port=8775
+
+#
 # This expression, if defined, will select any matching iptables rules and place
 # them at the top when applying metadata changes to the rules.
 #
 # Possible values:
 #
-# * Any string representing a valid regular expression, or an empty string
-#
-# Related options:
-#
-# * ``iptables_bottom_regex``
-#  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
+#     * Any string representing a valid regular expression, or an empty string
+#
+# Related options:
+#
+#     * iptables_bottom_regex
+#  (string value)
 #iptables_top_regex =
 
-# DEPRECATED:
+#
 # This expression, if defined, will select any matching iptables rules and place
 # them at the bottom when applying metadata changes to the rules.
 #
 # Possible values:
 #
-# * Any string representing a valid regular expression, or an empty string
-#
-# Related options:
-#
-# * iptables_top_regex
-#  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
+#     * Any string representing a valid regular expression, or an empty string
+#
+# Related options:
+#
+#     * iptables_top_regex
+#  (string value)
 #iptables_bottom_regex =
 
-# DEPRECATED:
+#
 # By default, packets that do not pass the firewall are DROPped. In many cases,
 # though, an operator may find it more useful to change this from DROP to
 # REJECT,
@@ -1726,15 +1784,11 @@
 #
 # Possible values:
 #
-# * A string representing an iptables chain. The default is DROP.
-#  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#iptables_drop_action = DROP
-
-# DEPRECATED:
+#     * A string representing an iptables chain. The default is DROP.
+#  (string value)
+#iptables_drop_action=DROP
+
+#
 # This option represents the period of time, in seconds, that the ovs_vsctl
 # calls
 # will wait for a response from the database before timing out. A setting of 0
@@ -1742,46 +1796,34 @@
 #
 # Possible values:
 #
-# * Any positive integer if a limited timeout is desired, or zero if the calls
-#   should wait forever for a response.
+#     * Any positive integer if a limited timeout is desired, or zero if the
+#     calls should wait forever for a response.
 #  (integer value)
 # Minimum value: 0
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ovs_vsctl_timeout = 120
-
-# DEPRECATED:
+#ovs_vsctl_timeout=120
+
+#
 # This option is used mainly in testing to avoid calls to the underlying network
 # utilities.
 #  (boolean value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#fake_network = false
-
-# DEPRECATED:
+#fake_network=false
+
+#
 # This option determines the number of times to retry ebtables commands before
 # giving up. The minimum number of retries is 1.
 #
 # Possible values:
 #
-# * Any positive integer
-#
-# Related options:
-#
-# * ``ebtables_retry_interval``
+#     * Any positive integer
+#
+# Related options:
+#
+#     * ebtables_retry_interval
 #  (integer value)
 # Minimum value: 1
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ebtables_exec_attempts = 3
-
-# DEPRECATED:
+#ebtables_exec_attempts=3
+
+#
 # This option determines the time, in seconds, that the system will sleep in
 # between ebtables retries. Note that each successive retry waits a multiple of
 # this value, so for example, if this is set to the default of 1.0 seconds, and
@@ -1792,97 +1834,81 @@
 #
 # Possible values:
 #
-# * Any non-negative float or integer. Setting this to zero will result in no
-#   waiting between attempts.
-#
-# Related options:
-#
-# * ebtables_exec_attempts
+#     * Any non-negative float or integer. Setting this to zero will result in
+# no
+#     waiting between attempts.
+#
+# Related options:
+#
+#     * ebtables_exec_attempts
 #  (floating point value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ebtables_retry_interval = 1.0
+#ebtables_retry_interval=1.0
+
+#
+# This option determines whether the network setup information is injected into
+# the VM before it is booted. While it was originally designed to be used only
+# by
+# nova-network, it is also used by the vmware and xenapi virt drivers to control
+# whether network information is injected into a VM.
+#  (boolean value)
+#flat_injected=false
 
 # DEPRECATED:
-# Enable neutron as the backend for networking.
-#
-# Determine whether to use Neutron or Nova Network as the back end. Set to true
-# to use neutron.
-#  (boolean value)
+# This option determines the bridge used for simple network interfaces when no
+# bridge is specified in the VM creation request.
+#
+# Please note that this option is only used when using nova-network instead of
+# Neutron in your deployment.
+#
+# Possible values:
+#
+#     Any string representing a valid network bridge, such as 'br100'
+#
+# Related options:
+#
+#     ``use_neutron``
+#  (string value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#use_neutron = true
-
-#
-# This option determines whether the network setup information is injected into
-# the VM before it is booted. While it was originally designed to be used only
-# by nova-network, it is also used by the vmware and xenapi virt drivers to
-# control whether network information is injected into a VM. The libvirt virt
-# driver also uses it when we use config_drive to configure network to control
-# whether network information is injected into a VM.
-#  (boolean value)
-#flat_injected = false
+#flat_network_bridge=<None>
 
 # DEPRECATED:
-# This option determines the bridge used for simple network interfaces when no
-# bridge is specified in the VM creation request.
+# This is the address of the DNS server for a simple network. If this option is
+# not specified, the default of '8.8.4.4' is used.
 #
 # Please note that this option is only used when using nova-network instead of
 # Neutron in your deployment.
 #
 # Possible values:
 #
-# * Any string representing a valid network bridge, such as 'br100'
-#
-# Related options:
-#
-# * ``use_neutron``
+#     Any valid IP address.
+#
+# Related options:
+#
+#     ``use_neutron``
 #  (string value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#flat_network_bridge = <None>
+#flat_network_dns=8.8.4.4
 
 # DEPRECATED:
-# This is the address of the DNS server for a simple network. If this option is
-# not specified, the default of '8.8.4.4' is used.
-#
-# Please note that this option is only used when using nova-network instead of
-# Neutron in your deployment.
-#
-# Possible values:
-#
-# * Any valid IP address.
-#
-# Related options:
-#
-# * ``use_neutron``
+# This option is the name of the virtual interface of the VM on which the bridge
+# will be built. While it was originally designed to be used only by
+# nova-network, it is also used by libvirt for the bridge interface name.
+#
+# Possible values:
+#
+#     Any valid virtual interface name, such as 'eth0'
 #  (string value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#flat_network_dns = 8.8.4.4
-
-# DEPRECATED:
-# This option is the name of the virtual interface of the VM on which the bridge
-# will be built. While it was originally designed to be used only by
-# nova-network, it is also used by libvirt for the bridge interface name.
-#
-# Possible values:
-#
-# * Any valid virtual interface name, such as 'eth0'
-#  (string value)
-# This option is deprecated for removal since 15.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#flat_interface = <None>
+#flat_interface=<None>
 
 # DEPRECATED:
 # This is the VLAN number used for private networks. Note that the when creating
@@ -1897,13 +1923,12 @@
 #
 # Possible values:
 #
-# * Any integer between 1 and 4094. Values outside of that range will raise a
-#   ValueError exception.
-#
-# Related options:
-#
-# * ``network_manager``
-# * ``use_neutron``
+#     Any integer between 1 and 4094. Values outside of that range will raise a
+#     ValueError exception. Default = 100.
+#
+# Related options:
+#
+#     ``network_manager``, ``use_neutron``
 #  (integer value)
 # Minimum value: 1
 # Maximum value: 4094
@@ -1911,7 +1936,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#vlan_start = 100
+#vlan_start=100
 
 # DEPRECATED:
 # This option is the name of the virtual interface of the VM on which the VLAN
@@ -1925,7 +1950,7 @@
 #
 # Possible values:
 #
-# * Any valid virtual interface name, such as 'eth0'
+#     Any valid virtual interface name, such as 'eth0'
 #  (string value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
@@ -1934,7 +1959,7 @@
 # this option has an effect when using neutron, it incorrectly override the
 # value
 # provided by neutron and should therefore not be used.
-#vlan_interface = <None>
+#vlan_interface=<None>
 
 # DEPRECATED:
 # This option represents the number of networks to create if not explicitly
@@ -1950,25 +1975,25 @@
 #
 # Possible values:
 #
-# * Any positive integer is technically valid, although there are practical
-#   limits based upon available IP address space and virtual interfaces.
-#
-# Related options:
-#
-# * ``use_neutron``
-# * ``network_size``
+#     Any positive integer is technically valid, although there are practical
+#     limits based upon available IP address space and virtual interfaces. The
+#     default is 1.
+#
+# Related options:
+#
+#     ``use_neutron``, ``network_size``
 #  (integer value)
 # Minimum value: 1
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#num_networks = 1
+#num_networks=1
 
 # DEPRECATED:
-# This option is no longer used since the /os-cloudpipe API was removed in the
-# 16.0.0 Pike release. This is the public IP address for the cloudpipe VPN
-# servers. It defaults to the IP address of the host.
+# This is the public IP address for the cloudpipe VPN servers. It defaults to
+# the
+# IP address of the host.
 #
 # Please note that this option is only used when using nova-network instead of
 # Neutron in your deployment. It also will be ignored if the configuration
@@ -1978,19 +2003,17 @@
 #
 # Possible values:
 #
-# * Any valid IP address. The default is ``$my_ip``, the IP address of the VM.
-#
-# Related options:
-#
-# * ``network_manager``
-# * ``use_neutron``
-# * ``vpn_start``
+#     Any valid IP address. The default is $my_ip, the IP address of the VM.
+#
+# Related options:
+#
+#     ``network_manager``, ``use_neutron``, ``vpn_start``
 #  (string value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#vpn_ip = $my_ip
+#vpn_ip=$my_ip
 
 # DEPRECATED:
 # This is the port number to use as the first VPN port for private networks.
@@ -2004,13 +2027,11 @@
 #
 # Possible values:
 #
-# * Any integer representing a valid port number. The default is 1000.
-#
-# Related options:
-#
-# * ``use_neutron``
-# * ``vpn_ip``
-# * ``network_manager``
+#     Any integer representing a valid port number. The default is 1000.
+#
+# Related options:
+#
+#     ``use_neutron``, ``vpn_ip``, ``network_manager``
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
@@ -2018,7 +2039,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#vpn_start = 1000
+#vpn_start=1000
 
 # DEPRECATED:
 # This option determines the number of addresses in each private subnet.
@@ -2028,21 +2049,21 @@
 #
 # Possible values:
 #
-# * Any positive integer that is less than or equal to the available network
-#   size. Note that if you are creating multiple networks, they must all fit in
-#   the available IP address space. The default is 256.
-#
-# Related options:
-#
-# * ``use_neutron``
-# * ``num_networks``
+#     Any positive integer that is less than or equal to the available network
+#     size. Note that if you are creating multiple networks, they must all fit
+# in
+#     the available IP address space. The default is 256.
+#
+# Related options:
+#
+#     ``use_neutron``, ``num_networks``
 #  (integer value)
 # Minimum value: 1
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#network_size = 256
+#network_size=256
 
 # DEPRECATED:
 # This option determines the fixed IPv6 address block when creating a network.
@@ -2052,17 +2073,17 @@
 #
 # Possible values:
 #
-# * Any valid IPv6 CIDR
-#
-# Related options:
-#
-# * ``use_neutron``
+#     Any valid IPv6 CIDR. The default value is "fd00::/48".
+#
+# Related options:
+#
+#     ``use_neutron``
 #  (string value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#fixed_range_v6 = fd00::/48
+#fixed_range_v6=fd00::/48
 
 # DEPRECATED:
 # This is the default IPv4 gateway. It is used only in the testing suite.
@@ -2072,18 +2093,17 @@
 #
 # Possible values:
 #
-# * Any valid IP address.
-#
-# Related options:
-#
-# * ``use_neutron``
-# * ``gateway_v6``
+#     Any valid IP address.
+#
+# Related options:
+#
+#     ``use_neutron``, ``gateway_v6``
 #  (string value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#gateway = <None>
+#gateway=<None>
 
 # DEPRECATED:
 # This is the default IPv6 gateway. It is used only in the testing suite.
@@ -2093,18 +2113,17 @@
 #
 # Possible values:
 #
-# * Any valid IP address.
-#
-# Related options:
-#
-# * ``use_neutron``
-# * ``gateway``
+#     Any valid IP address.
+#
+# Related options:
+#
+#     ``use_neutron``, ``gateway``
 #  (string value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#gateway_v6 = <None>
+#gateway_v6=<None>
 
 # DEPRECATED:
 # This option represents the number of IP addresses to reserve at the top of the
@@ -2114,19 +2133,18 @@
 #
 # Possible values:
 #
-# * Any integer, 0 or greater.
-#
-# Related options:
-#
-# * ``use_neutron``
-# * ``network_manager``
+#     Any integer, 0 or greater. The default is 0.
+#
+# Related options:
+#
+#     ``use_neutron``, ``network_manager``
 #  (integer value)
 # Minimum value: 0
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#cnt_vpn_clients = 0
+#cnt_vpn_clients=0
 
 # DEPRECATED:
 # This is the number of seconds to wait before disassociating a deallocated
@@ -2136,18 +2154,18 @@
 #
 # Possible values:
 #
-# * Any integer, zero or greater.
-#
-# Related options:
-#
-# * ``use_neutron``
+#     Any integer, zero or greater. The default is 600 (10 minutes).
+#
+# Related options:
+#
+#     ``use_neutron``
 #  (integer value)
 # Minimum value: 0
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#fixed_ip_disassociate_timeout = 600
+#fixed_ip_disassociate_timeout=600
 
 # DEPRECATED:
 # This option determines how many times nova-network will attempt to create a
@@ -2156,18 +2174,18 @@
 #
 # Possible values:
 #
-# * Any positive integer. The default is 5.
-#
-# Related options:
-#
-# * ``use_neutron``
+#     Any positive integer. The default is 5.
+#
+# Related options:
+#
+#     ``use_neutron``
 #  (integer value)
 # Minimum value: 1
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#create_unique_mac_address_attempts = 5
+#create_unique_mac_address_attempts=5
 
 # DEPRECATED:
 # Determines whether unused gateway devices, both VLAN and bridge, are deleted
@@ -2176,15 +2194,13 @@
 #
 # Related options:
 #
-# * ``use_neutron``
-# * ``vpn_ip``
-# * ``fake_network``
+#     ``use_neutron``, ``vpn_ip``, ``fake_network``
 #  (boolean value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#teardown_unused_network_gateway = false
+#teardown_unused_network_gateway=false
 
 # DEPRECATED:
 # When this option is True, a call is made to release the DHCP for the instance
@@ -2192,13 +2208,13 @@
 #
 # Related options:
 #
-# * ``use_neutron``
+#     ``use_neutron``
 #  (boolean value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#force_dhcp_release = true
+force_dhcp_release=true
 
 # DEPRECATED:
 # When this option is True, whenever a DNS entry must be updated, a fanout cast
@@ -2207,13 +2223,13 @@
 #
 # Related options:
 #
-# * ``use_neutron``
+#     ``use_neutron``
 #  (boolean value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#update_dns_entries = false
+#update_dns_entries=false
 
 # DEPRECATED:
 # This option determines the time, in seconds, to wait between refreshing DNS
@@ -2221,54 +2237,55 @@
 #
 # Possible values:
 #
-# * A positive integer
-# * -1 to disable updates
-#
-# Related options:
-#
-# * ``use_neutron``
+#     Either -1 (default), or any positive integer. A negative value will
+# disable
+#     the updates.
+#
+# Related options:
+#
+#     ``use_neutron``
 #  (integer value)
 # Minimum value: -1
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#dns_update_periodic_interval = -1
+#dns_update_periodic_interval=-1
 
 # DEPRECATED:
 # This option allows you to specify the domain for the DHCP server.
 #
 # Possible values:
 #
-# * Any string that is a valid domain name.
-#
-# Related options:
-#
-# * ``use_neutron``
+#     Any string that is a valid domain name.
+#
+# Related options:
+#
+#     ``use_neutron``
 #  (string value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#dhcp_domain = novalocal
+#dhcp_domain=novalocal
 
 # DEPRECATED:
 # This option allows you to specify the L3 management library to be used.
 #
 # Possible values:
 #
-# * Any dot-separated string that represents the import path to an L3 networking
-#   library.
-#
-# Related options:
-#
-# * ``use_neutron``
+#     Any dot-separated string that represents the import path to an L3
+#     networking library.
+#
+# Related options:
+#
+#     ``use_neutron``
 #  (string value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#l3_lib = nova.network.l3.LinuxNetL3
+#l3_lib=nova.network.l3.LinuxNetL3
 
 # DEPRECATED:
 # THIS VALUE SHOULD BE SET WHEN CREATING THE NETWORK.
@@ -2286,73 +2303,58 @@
 #  (boolean value)
 # This option is deprecated for removal since 2014.2.
 # Its value may be silently ignored in the future.
-#share_dhcp_address = false
-
-# DEPRECATED:
-# URL for LDAP server which will store DNS entries
-#
-# Possible values:
-#
-# * A valid LDAP URL representing the server
-#  (uri value)
-# This option is deprecated for removal since 16.0.0.
+#share_dhcp_address=false
+
+# DEPRECATED: Whether to use Neutron or Nova Network as the back end for
+# networking. Defaults to False (indicating Nova network).Set to True to use
+# neutron. (boolean value)
+# This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#ldap_dns_url = ldap://ldap.example.com:389
-
-# DEPRECATED: Bind user for LDAP server (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ldap_dns_user = uid=admin,ou=people,dc=example,dc=org
-
-# DEPRECATED: Bind user's password for LDAP server (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ldap_dns_password = password
-
-# DEPRECATED:
+#use_neutron=true
+
+#
+# URL for LDAP server which will store DNS entries
+#
+# Possible values:
+#
+# * A valid LDAP URL representing the server
+#  (uri value)
+#ldap_dns_url=ldap://ldap.example.com:389
+
+# Bind user for LDAP server (string value)
+#ldap_dns_user=uid=admin,ou=people,dc=example,dc=org
+
+# Bind user's password for LDAP server (string value)
+#ldap_dns_password=password
+
+#
 # Hostmaster for LDAP DNS driver Statement of Authority
 #
 # Possible values:
 #
 # * Any valid string representing LDAP DNS hostmaster.
 #  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ldap_dns_soa_hostmaster = hostmaster@example.org
-
-# DEPRECATED:
+#ldap_dns_soa_hostmaster=hostmaster@example.org
+
+#
 # DNS Servers for LDAP DNS driver
 #
 # Possible values:
 #
 # * A valid URL representing a DNS server
 #  (multi valued)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ldap_dns_servers = dns.example.org
-
-# DEPRECATED:
+#ldap_dns_servers=dns.example.org
+
+#
 # Base distinguished name for the LDAP search query
 #
 # This option helps to decide where to look up the host in LDAP.
 #  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ldap_dns_base_dn = ou=hosts,dc=example,dc=org
-
-# DEPRECATED:
+#ldap_dns_base_dn=ou=hosts,dc=example,dc=org
+
+#
 # Refresh interval (in seconds) for LDAP DNS driver Start of Authority
 #
 # Time interval, a secondary/slave DNS server waits before requesting for
@@ -2361,48 +2363,41 @@
 #
 # NOTE: Lower values would cause more traffic.
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ldap_dns_soa_refresh = 1800
-
-# DEPRECATED:
+#ldap_dns_soa_refresh=1800
+
+#
 # Retry interval (in seconds) for LDAP DNS driver Start of Authority
 #
 # Time interval, a secondary/slave DNS server should wait, if an
 # attempt to transfer zone failed during the previous refresh interval.
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ldap_dns_soa_retry = 3600
-
-# DEPRECATED:
+#ldap_dns_soa_retry=3600
+
+#
 # Expiry interval (in seconds) for LDAP DNS driver Start of Authority
 #
 # Time interval, a secondary/slave DNS server holds the information
 # before it is no longer considered authoritative.
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ldap_dns_soa_expiry = 86400
-
-# DEPRECATED:
+#ldap_dns_soa_expiry=86400
+
+#
 # Minimum interval (in seconds) for LDAP DNS driver Start of Authority
 #
 # It is Minimum time-to-live applies for all resource records in the
 # zone file. This value is supplied to other servers how long they
 # should keep the data in cache.
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
+#ldap_dns_soa_minimum=7200
+
+# DEPRECATED: The topic network nodes listen on (string value)
+# This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
-# nova-network is deprecated, as are any related configuration options.
-#ldap_dns_soa_minimum = 7200
+# There is no need to let users choose the RPC topic for all services - there
+# is little gain from this. Furthermore, it makes it really easy to break Nova
+# by using this option.
+#network_topic=network
 
 # DEPRECATED:
 # Default value for multi_host in networks.
@@ -2422,13 +2417,13 @@
 #
 # Related options:
 #
-# * ``use_neutron``
+# * use_neutron
 #  (boolean value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#multi_host = false
+#multi_host=false
 
 # DEPRECATED:
 # Driver to use for network creation.
@@ -2446,26 +2441,29 @@
 #
 # Related options:
 #
-# * ``use_neutron``
+# * use_neutron
 #  (string value)
 # This option is deprecated for removal since 15.0.0.
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#network_driver = nova.network.linux_net
-
-# DEPRECATED:
+#network_driver=nova.network.linux_net
+
+#
 # Firewall driver to use with ``nova-network`` service.
 #
 # This option only applies when using the ``nova-network`` service. When using
 # another networking services, such as Neutron, this should be to set to the
 # ``nova.virt.firewall.NoopFirewallDriver``.
 #
-# Possible values:
-#
-# * ``nova.virt.firewall.IptablesFirewallDriver``
-# * ``nova.virt.firewall.NoopFirewallDriver``
-# * ``nova.virt.libvirt.firewall.IptablesFirewallDriver``
+# If unset (the default), this will default to the hypervisor-specified
+# default driver.
+#
+# Possible values:
+#
+# * nova.virt.firewall.IptablesFirewallDriver
+# * nova.virt.firewall.NoopFirewallDriver
+# * nova.virt.libvirt.firewall.IptablesFirewallDriver
 # * [...]
 #
 # Related options:
@@ -2473,13 +2471,10 @@
 # * ``use_neutron``: This must be set to ``False`` to enable ``nova-network``
 #   networking
 #  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#firewall_driver = nova.virt.firewall.NoopFirewallDriver
-
-# DEPRECATED:
+#firewall_driver=<None>
+firewall_driver=nova.virt.firewall.NoopFirewallDriver
+
+#
 # Determine whether to allow network traffic from same network.
 #
 # When set to true, hosts on the same subnet are not filtered and are allowed
@@ -2506,144 +2501,34 @@
 #   ``nova.virt.libvirt.firewall.IptablesFirewallDriver`` to ensure the
 #   libvirt firewall driver is enabled.
 #  (boolean value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#allow_same_net_traffic = true
-
-# DEPRECATED:
-# Default pool for floating IPs.
-#
-# This option specifies the default floating IP pool for allocating floating
-# IPs.
-#
-# While allocating a floating ip, users can optionally pass in the name of the
-# pool they want to allocate from, otherwise it will be pulled from the
-# default pool.
-#
-# If this option is not set, then 'nova' is used as default floating pool.
-#
-# Possible values:
-#
-# * Any string representing a floating IP pool name
-#  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option was used for two purposes: to set the floating IP pool name for
-# nova-network and to do the same for neutron. nova-network is deprecated, as
-# are
-# any related configuration options. Users of neutron, meanwhile, should use the
-# 'default_floating_pool' option in the '[neutron]' group.
-#default_floating_pool = nova
-
-# DEPRECATED:
-# Autoassigning floating IP to VM
-#
-# When set to True, floating IP is auto allocated and associated
-# to the VM upon creation.
-#
-# Related options:
-#
-# * use_neutron: this options only works with nova-network.
-#  (boolean value)
-# This option is deprecated for removal since 15.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#auto_assign_floating_ip = false
-
-# DEPRECATED:
-# Full class name for the DNS Manager for floating IPs.
-#
-# This option specifies the class of the driver that provides functionality
-# to manage DNS entries associated with floating IPs.
-#
-# When a user adds a DNS entry for a specified domain to a floating IP,
-# nova will add a DNS entry using the specified floating DNS driver.
-# When a floating IP is deallocated, its DNS entry will automatically be
-# deleted.
-#
-# Possible values:
-#
-# * Full Python path to the class to be used
-#
-# Related options:
-#
-# * use_neutron: this options only works with nova-network.
-#  (string value)
-# This option is deprecated for removal since 15.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#floating_ip_dns_manager = nova.network.noop_dns_driver.NoopDNSDriver
-
-# DEPRECATED:
-# Full class name for the DNS Manager for instance IPs.
-#
-# This option specifies the class of the driver that provides functionality
-# to manage DNS entries for instances.
-#
-# On instance creation, nova will add DNS entries for the instance name and
-# id, using the specified instance DNS driver and domain. On instance deletion,
-# nova will remove the DNS entries.
-#
-# Possible values:
-#
-# * Full Python path to the class to be used
-#
-# Related options:
-#
-# * use_neutron: this options only works with nova-network.
-#  (string value)
-# This option is deprecated for removal since 15.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#instance_dns_manager = nova.network.noop_dns_driver.NoopDNSDriver
-
-# DEPRECATED:
-# If specified, Nova checks if the availability_zone of every instance matches
-# what the database says the availability_zone should be for the specified
-# dns_domain.
-#
-# Related options:
-#
-# * use_neutron: this options only works with nova-network.
-#  (string value)
-# This option is deprecated for removal since 15.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#instance_dns_domain =
+#allow_same_net_traffic=true
 
 #
 # Filename that will be used for storing websocket frames received
 # and sent by a proxy service (like VNC, spice, serial) running on this host.
 # If this is not set, no recording will be done.
 #  (string value)
-#record = <None>
+#record=<None>
 
 # Run as a background process. (boolean value)
-#daemon = false
+#daemon=false
 
 # Disallow non-encrypted connections. (boolean value)
-#ssl_only = false
+#ssl_only=false
 
 # Set to True if source host is addressed with IPv6. (boolean value)
-#source_is_ipv6 = false
+#source_is_ipv6=false
 
 # Path to SSL certificate file. (string value)
-#cert = self.pem
+#cert=self.pem
 
 # SSL key file (if separate from cert). (string value)
-#key = <None>
+#key=<None>
 
 #
 # Path to directory with content which will be served by a web server.
 #  (string value)
-#web = /usr/share/spice-html5
+#web=/usr/share/spice-html5
 
 #
 # The directory where the Nova python modules are installed.
@@ -2661,7 +2546,7 @@
 #
 # * ``state_path``
 #  (string value)
-#pybasedir = /build/nova-Ba4tt9/nova-16.1.2
+#pybasedir=/build/nova-elxmSs/nova-15.0.2
 
 #
 # The directory where the Nova binaries are installed.
@@ -2675,7 +2560,7 @@
 #
 # * The full path to a directory.
 #  (string value)
-#bindir = /usr/local/bin
+#bindir=/usr/local/bin
 
 #
 # The top-level directory for maintaining Nova's state.
@@ -2691,7 +2576,7 @@
 #
 # * The full path to a directory. Defaults to value provided in ``pybasedir``.
 #  (string value)
-#state_path = $pybasedir
+state_path=/var/lib/nova
 
 #
 # Number of seconds indicating how frequently the state of services on a
@@ -2705,7 +2590,8 @@
 #   is less than report_interval, services will routinely be considered down,
 #   because they report in too rarely.
 #  (integer value)
-#report_interval = 10
+#report_interval=10
+report_interval=10
 
 #
 # Maximum time in seconds since last check-in for up service
@@ -2718,7 +2604,7 @@
 #
 # * report_interval (service_down_time should not be less than report_interval)
 #  (integer value)
-#service_down_time = 60
+service_down_time = 180
 
 #
 # Enable periodic tasks.
@@ -2730,7 +2616,7 @@
 # periodic tasks on only one host - in this case disable this option for all
 # hosts but one.
 #  (boolean value)
-#periodic_enable = true
+#periodic_enable=true
 
 #
 # Number of seconds to randomly delay when starting the periodic task
@@ -2748,10 +2634,10 @@
 # * 0 : disable the random delay
 #  (integer value)
 # Minimum value: 0
-#periodic_fuzzy_delay = 60
+#periodic_fuzzy_delay=60
 
 # List of APIs to be enabled by default. (list value)
-#enabled_apis = osapi_compute,metadata
+enabled_apis=osapi_compute,metadata
 
 #
 # List of APIs with enabled SSL.
@@ -2767,7 +2653,8 @@
 # The OpenStack API service listens on this IP address for incoming
 # requests.
 #  (string value)
-#osapi_compute_listen = 0.0.0.0
+#osapi_compute_listen=0.0.0.0
+osapi_compute_listen=172.16.10.36
 
 #
 # Port on which the OpenStack API will listen.
@@ -2777,7 +2664,7 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#osapi_compute_listen_port = 8774
+#osapi_compute_listen_port=8774
 
 #
 # Number of workers for OpenStack API service. The default will be the number
@@ -2794,7 +2681,8 @@
 # * None (default value)
 #  (integer value)
 # Minimum value: 1
-#osapi_compute_workers = <None>
+#osapi_compute_workers=<None>
+osapi_compute_workers = 1
 
 #
 # IP address on which the metadata API will listen.
@@ -2802,7 +2690,9 @@
 # The metadata API service listens on this IP address for incoming
 # requests.
 #  (string value)
-#metadata_listen = 0.0.0.0
+#metadata_listen=0.0.0.0
+metadata_listen=172.16.10.36
+osapi_volume_listen=172.16.10.36
 
 #
 # Port on which the metadata API will listen.
@@ -2812,7 +2702,7 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#metadata_listen_port = 8775
+#metadata_listen_port=8775
 
 #
 # Number of workers for metadata service. If not specified the number of
@@ -2829,11 +2719,12 @@
 # * None (default value)
 #  (integer value)
 # Minimum value: 1
-#metadata_workers = <None>
+#metadata_workers=<None>
+metadata_workers = 1
 
 # Full class name for the Manager for network (string value)
 # Allowed values: nova.network.manager.FlatManager, nova.network.manager.FlatDHCPManager, nova.network.manager.VlanManager
-#network_manager = nova.network.manager.VlanManager
+#network_manager=nova.network.manager.VlanManager
 
 #
 # This option specifies the driver to be used for the servicegroup service.
@@ -2857,7 +2748,7 @@
 #     * service_down_time (maximum time since last check-in for up service)
 #  (string value)
 # Allowed values: db, mc
-#servicegroup_driver = db
+#servicegroup_driver=db
 
 #
 # From oslo.log
@@ -2866,7 +2757,15 @@
 # If set to true, the logging level will be set to DEBUG instead of the default
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
-#debug = false
+#debug=false
+debug=false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose=true
+verbose=true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -2876,131 +2775,132 @@
 # example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
+#log_config_append=<None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
 # %(default)s . This option is ignored if log_config_append is set. (string
 # value)
-#log_date_format = %Y-%m-%d %H:%M:%S
+#log_date_format=%Y-%m-%d %H:%M:%S
 
 # (Optional) Name of log file to send logging output to. If no default is set,
 # logging will go to stderr as defined by use_stderr. This option is ignored if
 # log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
+#log_file=<None>
 
 # (Optional) The base directory used for relative log_file  paths. This option
 # is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
+log_dir=/var/log/nova
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
 # instantaneously. It makes sense only if log_file option is specified and Linux
 # platform is used. This option is ignored if log_config_append is set. (boolean
 # value)
-#watch_log_file = false
+#watch_log_file=false
 
 # Use syslog for logging. Existing syslog format is DEPRECATED and will be
 # changed later to honor RFC5424. This option is ignored if log_config_append is
 # set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
+#use_syslog=false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
+#syslog_log_facility=LOG_USER
 
 # Log output to standard error. This option is ignored if log_config_append is
 # set. (boolean value)
-#use_stderr = false
+#use_stderr=false
 
 # Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+#logging_context_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
 # Format string to use for log messages when context is undefined. (string
 # value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+#logging_default_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
 # Additional data to append to log message when logging level for the message is
 # DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+#logging_debug_format_suffix=%(funcName)s %(pathname)s:%(lineno)d
 
 # Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+#logging_exception_prefix=%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+#logging_user_identity_format=%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels=amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
-#publish_errors = false
+#publish_errors=false
 
 # The format for an instance that is passed with the log message. (string value)
-#instance_format = "[instance: %(uuid)s] "
+#instance_format="[instance: %(uuid)s] "
 
 # The format for an instance UUID that is passed with the log message. (string
 # value)
-#instance_uuid_format = "[instance: %(uuid)s] "
+#instance_uuid_format="[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
+#rate_limit_interval=0
 
 # Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
+#rate_limit_burst=0
 
 # Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
 # empty string. Logs with level greater or equal to rate_limit_except_level are
 # not filtered. An empty string means that all levels are filtered. (string
 # value)
-#rate_limit_except_level = CRITICAL
+#rate_limit_except_level=CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
+#fatal_deprecations=false
 
 #
 # From oslo.messaging
 #
 
 # Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size=30
 
 # The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
+#conn_pool_min_size=2
 
 # The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
+#conn_pool_ttl=1200
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address=*
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker=redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts=1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog=<None>
 
 # Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir=/var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host=localhost
 
 # Number of seconds to wait before all pending messages will be sent after
 # closing a socket. The default value of -1 specifies an infinite linger period.
@@ -3008,138 +2908,147 @@
 # immediately when the socket is closed. Positive values specify an upper bound
 # for the linger period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
+#zmq_linger=-1
+zmq_linger=30
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout=1
 
 # Expiration timeout in seconds of a name service record about existing target (
 # < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire=300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
-#zmq_target_update = 180
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update=180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
-#use_pub_sub = false
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub=false
 
 # Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy=false
 
 # This option makes direct connections dynamic or static. It makes sense only
 # with use_router_proxy=False which means to use direct connections for direct
 # message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
+#use_dynamic_connections=false
 
 # How many additional connections to a host will be made for failover reasons.
 # This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
+#zmq_failover_connections=2
 
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#rpc_zmq_min_port = 49153
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port=49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
-#rpc_zmq_max_port = 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port=65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
-#rpc_zmq_bind_port_retries = 100
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries=100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
-#rpc_zmq_serialization = json
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization=json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
 # a queue when server side disconnects. False means to keep queue and messages
 # even if server is disconnected, when the server appears we send all
 # accumulated messages to it. (boolean value)
-#zmq_immediate = true
+#zmq_immediate=true
 
 # Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
 # other negative value) means to skip any overrides and leave it to OS default;
 # 0 and 1 (or any other positive value) mean to disable and enable the option
 # respectively. (integer value)
-#zmq_tcp_keepalive = -1
+#zmq_tcp_keepalive=-1
 
 # The duration between two keepalive transmissions in idle condition. The unit
 # is platform dependent, for example, seconds in Linux, milliseconds in Windows
 # etc. The default value of -1 (or any other negative value and 0) means to skip
 # any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
+#zmq_tcp_keepalive_idle=-1
 
 # The number of retransmissions to be carried out before declaring that remote
 # end is not available. The default value of -1 (or any other negative value and
 # 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
+#zmq_tcp_keepalive_cnt=-1
 
 # The duration between two successive keepalive retransmissions, if
 # acknowledgement to the previous keepalive transmission is not received. The
 # unit is platform dependent, for example, seconds in Linux, milliseconds in
 # Windows etc. The default value of -1 (or any other negative value and 0) means
 # to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
+#zmq_tcp_keepalive_intvl=-1
 
 # Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
+#rpc_thread_pool_size=100
 
 # Expiration timeout in seconds of a sent/received message after which it is not
 # tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
+#rpc_message_ttl=300
 
 # Wait for message acknowledgements from receivers. This mechanism works only
 # via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
+#rpc_use_acks=false
 
 # Number of seconds to wait for an ack from a cast/call. After each retry
 # attempt this timeout is multiplied by some specified multiplier. (integer
 # value)
-#rpc_ack_timeout_base = 15
+#rpc_ack_timeout_base=15
 
 # Number to multiply base ack timeout by after each retry attempt. (integer
 # value)
-#rpc_ack_timeout_multiplier = 2
+#rpc_ack_timeout_multiplier=2
 
 # Default number of message sending attempts in case of any problems occurred:
 # positive value N means at most N retries, 0 means no retries, None or -1 (or
 # any other negative values) mean to retry forever. This option is used only if
 # acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
+#rpc_retry_attempts=3
 
 # List of publisher hosts SubConsumer can subscribe on. This option has higher
 # priority then the default publishers list taken from the matchmaker. (list
 # value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
+#executor_thread_pool_size=64
 
 # Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# A URL representing the messaging driver to use and its full configuration.
-# (string value)
-#transport_url = <None>
+#rpc_response_timeout=60
+rpc_response_timeout=3600
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
+
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
+#rpc_backend=rabbit
+rpc_backend=rabbit
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
+#control_exchange=openstack
 
 #
 # From oslo.service.periodic_task
@@ -3147,7 +3056,7 @@
 
 # Some periodic tasks can be run in a separate process. Should we run them here?
 # (boolean value)
-#run_external_periodic_tasks = true
+#run_external_periodic_tasks=true
 
 #
 # From oslo.service.service
@@ -3159,21 +3068,21 @@
 # is in use); and <start>:<end> results in listening on the smallest unused port
 # number within the specified range of port numbers.  The chosen port is
 # displayed in the service's log file. (string value)
-#backdoor_port = <None>
+#backdoor_port=<None>
 
 # Enable eventlet backdoor, using the provided path as a unix socket that can
 # receive connections. This option is mutually exclusive with 'backdoor_port' in
 # that only one should be provided. If both are provided then the existence of
 # this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
+#backdoor_socket=<None>
 
 # Enables or disables logging values of all registered options when starting a
 # service (at DEBUG level). (boolean value)
-#log_options = true
+#log_options=true
 
 # Specify a timeout after which a gracefully shutdown server will exit. Zero
 # value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
+#graceful_shutdown_timeout=60
 
 
 [api]
@@ -3191,7 +3100,9 @@
 # specified as the username.
 #  (string value)
 # Allowed values: keystone, noauth2
-#auth_strategy = keystone
+# Deprecated group/name - [DEFAULT]/auth_strategy
+#auth_strategy=keystone
+auth_strategy=keystone
 
 #
 # When True, the 'X-Forwarded-For' header is treated as the canonical remote
@@ -3199,7 +3110,9 @@
 #
 # You should only enable this if you have an HTML sanitizing proxy.
 #  (boolean value)
-#use_forwarded_for = false
+# Deprecated group/name - [DEFAULT]/use_forwarded_for
+#use_forwarded_for=false
+use_forwarded_for=false
 
 #
 # When gathering the existing metadata for a config drive, the EC2-style
@@ -3223,7 +3136,8 @@
 #
 # * Any string that represents zero or more versions, separated by spaces.
 #  (string value)
-#config_drive_skip_versions = 1.0 2007-01-19 2007-03-01 2007-08-29 2007-10-10 2007-12-15 2008-02-01 2008-09-01
+# Deprecated group/name - [DEFAULT]/config_drive_skip_versions
+#config_drive_skip_versions=1.0 2007-01-19 2007-03-01 2007-08-29 2007-10-10 2007-12-15 2008-02-01 2008-09-01
 
 #
 # A list of vendordata providers.
@@ -3257,6 +3171,7 @@
 # * vendordata_dynamic_read_timeout
 # * vendordata_dynamic_failure_fatal
 #  (list value)
+# Deprecated group/name - [DEFAULT]/vendordata_providers
 #vendordata_providers =
 
 #
@@ -3267,6 +3182,7 @@
 # services and querying them for information about the instance. This behaviour
 # is documented in the vendordata.rst file in the nova developer reference.
 #  (list value)
+# Deprecated group/name - [DEFAULT]/vendordata_dynamic_targets
 #vendordata_dynamic_targets =
 
 #
@@ -3285,6 +3201,7 @@
 # * vendordata_dynamic_read_timeout
 # * vendordata_dynamic_failure_fatal
 #  (string value)
+# Deprecated group/name - [DEFAULT]/vendordata_dynamic_ssl_certfile
 #vendordata_dynamic_ssl_certfile =
 
 #
@@ -3305,7 +3222,8 @@
 # * vendordata_dynamic_failure_fatal
 #  (integer value)
 # Minimum value: 3
-#vendordata_dynamic_connect_timeout = 5
+# Deprecated group/name - [DEFAULT]/vendordata_dynamic_connect_timeout
+#vendordata_dynamic_connect_timeout=5
 
 #
 # Maximum wait time for an external REST service to return data once connected.
@@ -3324,7 +3242,8 @@
 # * vendordata_dynamic_failure_fatal
 #  (integer value)
 # Minimum value: 0
-#vendordata_dynamic_read_timeout = 5
+# Deprecated group/name - [DEFAULT]/vendordata_dynamic_read_timeout
+#vendordata_dynamic_read_timeout=5
 
 #
 # Should failures to fetch dynamic vendordata be fatal to instance boot?
@@ -3337,7 +3256,7 @@
 # * vendordata_dynamic_connect_timeout
 # * vendordata_dynamic_read_timeout
 #  (boolean value)
-#vendordata_dynamic_failure_fatal = false
+#vendordata_dynamic_failure_fatal=false
 
 #
 # This option is the time (in seconds) to cache metadata. When set to 0,
@@ -3347,7 +3266,8 @@
 # usage, and result in longer times for host metadata changes to take effect.
 #  (integer value)
 # Minimum value: 0
-#metadata_cache_expiration = 15
+# Deprecated group/name - [DEFAULT]/metadata_cache_expiration
+#metadata_cache_expiration=15
 
 #
 # Cloud providers may store custom data in vendor data file that will then be
@@ -3361,7 +3281,8 @@
 # * Any string representing the path to the data file, or an empty string
 #     (default).
 #  (string value)
-#vendordata_jsonfile_path = <None>
+# Deprecated group/name - [DEFAULT]/vendordata_jsonfile_path
+#vendordata_jsonfile_path=<None>
 
 #
 # As a query can potentially return many thousands of items, you can limit the
@@ -3369,7 +3290,8 @@
 #  (integer value)
 # Minimum value: 0
 # Deprecated group/name - [DEFAULT]/osapi_max_limit
-#max_limit = 1000
+#max_limit=1000
+max_limit=1000
 
 #
 # This string is prepended to the normal URL that is returned in links to the
@@ -3381,7 +3303,7 @@
 # * Any string, including an empty string (the default).
 #  (string value)
 # Deprecated group/name - [DEFAULT]/osapi_compute_link_prefix
-#compute_link_prefix = <None>
+#compute_link_prefix=<None>
 
 #
 # This string is prepended to the normal URL that is returned in links to
@@ -3393,20 +3315,15 @@
 # * Any string, including an empty string (the default).
 #  (string value)
 # Deprecated group/name - [DEFAULT]/osapi_glance_link_prefix
-#glance_link_prefix = <None>
-
-# DEPRECATED:
+#glance_link_prefix=<None>
+
+#
 # Operators can turn off the ability for a user to take snapshots of their
 # instances by setting this option to False. When disabled, any attempt to
 # take a snapshot will result in a HTTP 400 response ("Bad Request").
 #  (boolean value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: This option disables the createImage server action API in a non-
-# discoverable way and is thus a barrier to interoperability. Also, it is not
-# used for other APIs that create snapshots like shelve or createBackup.
-# Disabling snapshots should be done via policy if so desired.
-#allow_instance_snapshots = true
+# Deprecated group/name - [DEFAULT]/allow_instance_snapshots
+#allow_instance_snapshots=true
 
 #
 # This option is a list of all instance states for which network address
@@ -3431,10 +3348,12 @@
 # * "shelved_offloaded"
 #  (list value)
 # Deprecated group/name - [DEFAULT]/osapi_hide_server_address_states
-#hide_server_address_states = building
+#hide_server_address_states=building
 
 # The full path to the fping binary. (string value)
-#fping_path = /usr/sbin/fping
+# Deprecated group/name - [DEFAULT]/fping_path
+#fping_path=/usr/sbin/fping
+fping_path=/usr/sbin/fping
 
 #
 # When True, the TenantNetworkController will query the Neutron API to get the
@@ -3444,7 +3363,8 @@
 #
 # * neutron_default_tenant_id
 #  (boolean value)
-#use_neutron_default_nets = false
+# Deprecated group/name - [DEFAULT]/use_neutron_default_nets
+#use_neutron_default_nets=false
 
 #
 # Tenant ID for getting the default network from Neutron API (also referred in
@@ -3454,7 +3374,8 @@
 #
 # * use_neutron_default_nets
 #  (string value)
-#neutron_default_tenant_id = default
+# Deprecated group/name - [DEFAULT]/neutron_default_tenant_id
+#neutron_default_tenant_id=default
 
 #
 # Enables returning of the instance password by the relevant server API calls
@@ -3462,11 +3383,11 @@
 # support password injection, then the password returned will not be correct,
 # so if your hypervisor does not support password injection, set this to False.
 #  (boolean value)
-#enable_instance_password = true
+# Deprecated group/name - [DEFAULT]/enable_instance_password
+#enable_instance_password=true
 
 
 [api_database]
-connection = sqlite:////var/lib/nova/nova_api.sqlite
 #
 # The *Nova API Database* is a separate database which is used for information
 # which is used across *cells*. This database is mandatory since the Mitaka
@@ -3475,50 +3396,61 @@
 #
 # From nova.conf
 #
+idle_timeout = 180
+min_pool_size = 100
+max_pool_size = 700
+max_overflow = 100
+retry_interval = 5
+max_retries = -1
+db_max_retries = 3
+db_retry_interval = 1
+connection_debug = 10
+pool_timeout = 120
+connection = mysql+pymysql://nova:opnfv_secret@172.16.10.36/nova_api?charset=utf8
 
 # The SQLAlchemy connection string to use to connect to the database. (string
 # value)
-#connection = <None>
+#connection=sqlite:////var/lib/nova/nova.sqlite
 
 # If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
+#sqlite_synchronous=true
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
-#slave_connection = <None>
+#slave_connection=<None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
 # default, overrides any server-set SQL mode. To use whatever SQL mode is set by
 # the server configuration, set this to no value. Example: mysql_sql_mode=
 # (string value)
-#mysql_sql_mode = TRADITIONAL
+#mysql_sql_mode=TRADITIONAL
 
 # Timeout before idle SQL connections are reaped. (integer value)
-#idle_timeout = 3600
+#idle_timeout=3600
 
 # Maximum number of SQL connections to keep open in a pool. Setting a value of 0
 # indicates no limit. (integer value)
-#max_pool_size = <None>
+#max_pool_size=<None>
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
-#max_retries = 10
+#max_retries=10
 
 # Interval between retries of opening a SQL connection. (integer value)
-#retry_interval = 10
+#retry_interval=10
 
 # If set, use this value for max_overflow with SQLAlchemy. (integer value)
-#max_overflow = <None>
+#max_overflow=<None>
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
-#connection_debug = 0
+#connection_debug=0
 
 # Add Python stack traces to SQL as comment strings. (boolean value)
-#connection_trace = false
+#connection_trace=false
 
 # If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-#pool_timeout = <None>
+#pool_timeout=<None>
 
 
 [barbican]
@@ -3529,24 +3461,19 @@
 
 # Use this endpoint to connect to Barbican, for example:
 # "http://localhost:9311/" (string value)
-#barbican_endpoint = <None>
+#barbican_endpoint=<None>
 
 # Version of the Barbican API, for example: "v1" (string value)
-#barbican_api_version = <None>
+#barbican_api_version=<None>
 
 # Use this endpoint to connect to Keystone (string value)
-#auth_endpoint = http://localhost/identity/v3
 
 # Number of seconds to wait before retrying poll for key creation completion
 # (integer value)
-#retry_delay = 1
+#retry_delay=1
 
 # Number of times to retry poll for key creation completion (integer value)
-#number_of_retries = 60
-
-# Specifies if insecure TLS (https) requests. If False, the server's certificate
-# will not be validated (boolean value)
-#verify_ssl = true
+#number_of_retries=60
 
 
 [cache]
@@ -3554,25 +3481,26 @@
 #
 # From nova.conf
 #
-
+enabled = true
+backend = oslo_cache.memcache_pool
+memcache_servers=172.16.10.36:11211
 # Prefix for building the configuration dictionary for the cache region. This
 # should not need to be changed unless there is another dogpile.cache region
 # with the same configuration name. (string value)
-#config_prefix = cache.oslo
+#config_prefix=cache.oslo
 
 # Default TTL, in seconds, for any cached item in the dogpile.cache region. This
 # applies to any cached method that doesn't have an explicit cache expiration
 # time defined for it. (integer value)
-#expiration_time = 600
-
-# Cache backend module. For eventlet-based or environments with hundreds of
-# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
-# recommended. For environments with less than 100 threaded servers, Memcached
-# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
-# environments with a single instance of the server can use the
+#expiration_time=600
+
+# Dogpile.cache backend module. It is recommended that Memcache or Redis
+# (dogpile.cache.redis) be used in production deployments. For eventlet-based or
+# highly threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
+# recommended. For low thread servers, dogpile.cache.memcached is recommended.
+# Test environments with a single instance of the server can use the
 # dogpile.cache.memory backend. (string value)
-# Allowed values: oslo_cache.memcache_pool, oslo_cache.dict, dogpile.cache.memcached, dogpile.cache.redis, dogpile.cache.memory, dogpile.cache.null
-#backend = dogpile.cache.null
+#backend=dogpile.cache.null
 
 # Arguments supplied to the backend module. Specify this option once per
 # argument to be passed to the dogpile.cache backend. Example format:
@@ -3585,45 +3513,44 @@
 #proxies =
 
 # Global toggle for caching. (boolean value)
-#enabled = false
+#enabled=false
 
 # Extra debugging from the cache backend (cache keys, get/set/delete/etc calls).
 # This is only really useful if you need to see the specific cache-backend
 # get/set/delete calls with the keys/values.  Typically this should be left set
 # to false. (boolean value)
-#debug_cache_backend = false
+#debug_cache_backend=false
 
 # Memcache servers in the format of "host:port". (dogpile.cache.memcache and
 # oslo_cache.memcache_pool backends only). (list value)
-#memcache_servers = localhost:11211
+#memcache_servers=localhost:11211
 
 # Number of seconds memcached server is considered dead before it is tried
 # again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
 # (integer value)
-#memcache_dead_retry = 300
+#memcache_dead_retry=300
 
 # Timeout in seconds for every call to a server. (dogpile.cache.memcache and
 # oslo_cache.memcache_pool backends only). (integer value)
-#memcache_socket_timeout = 3
+#memcache_socket_timeout=3
 
 # Max total number of open connections to every memcached server.
 # (oslo_cache.memcache_pool backend only). (integer value)
-#memcache_pool_maxsize = 10
+#memcache_pool_maxsize=10
 
 # Number of seconds a connection to memcached is held unused in the pool before
 # it is closed. (oslo_cache.memcache_pool backend only). (integer value)
-#memcache_pool_unused_timeout = 60
+#memcache_pool_unused_timeout=60
 
 # Number of seconds that an operation will wait to get a memcache client
 # connection. (integer value)
-#memcache_pool_connection_get_timeout = 10
+#memcache_pool_connection_get_timeout=10
 
 
 [cells]
-enable = False
-#
-# DEPRECATED: Cells options allow you to use cells v1 functionality in an
-# OpenStack deployment.
+#
+# Cells options allow you to use cells functionality in openstack
+# deployment.
 #
 # Note that the options in this group are only for cells v1 functionality, which
 # is considered experimental and not recommended for new deployments. Cells v1
@@ -3636,6 +3563,24 @@
 #
 
 # DEPRECATED:
+# Topic.
+#
+# This is the message queue topic that cells nodes listen on. It is
+# used when the cells service is started up to configure the queue,
+# and whenever an RPC call to the scheduler is made.
+#
+# Possible values:
+#
+# * cells: This is the recommended and the default value.
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# Configurable RPC topics provide little value and can result in a wide variety
+# of errors. They should not be used.
+#topic=cells
+
+#
 # Enable cell v1 functionality.
 #
 # Note that cells v1 is considered experimental and not recommended for new
@@ -3660,12 +3605,9 @@
 #   is enabled.
 # * cell_type: Cell type should be defined for all cells.
 #  (boolean value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#enable = false
-
-# DEPRECATED:
+enable=False
+
+#
 # Name of the current cell.
 #
 # This value must be unique for each cell. Name of a cell is used as
@@ -3677,12 +3619,9 @@
 # * enabled: This option is meaningful only when cells service
 #   is enabled
 #  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#name = nova
-
-# DEPRECATED:
+#name=nova
+
+#
 # Cell capabilities.
 #
 # List of arbitrary key=value pairs defining capabilities of the
@@ -3694,12 +3633,9 @@
 # * key=value pairs list for example;
 #   ``hypervisor=xenserver;kvm,os=linux;windows``
 #  (list value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#capabilities = hypervisor=xenserver;kvm,os=linux;windows
-
-# DEPRECATED:
+#capabilities=hypervisor=xenserver;kvm,os=linux;windows
+
+#
 # Call timeout.
 #
 # Cell messaging module waits for response(s) to be put into the
@@ -3711,12 +3647,9 @@
 # * An integer, corresponding to the interval time in seconds.
 #  (integer value)
 # Minimum value: 0
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#call_timeout = 60
-
-# DEPRECATED:
+#call_timeout=60
+
+#
 # Reserve percentage
 #
 # Percentage of cell capacity to hold in reserve, so the minimum
@@ -3736,12 +3669,9 @@
 # * An integer or float, corresponding to the percentage of cell capacity to
 #   be held in reserve.
 #  (floating point value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#reserve_percent = 10.0
-
-# DEPRECATED:
+#reserve_percent=10.0
+
+#
 # Type of cell.
 #
 # When cells feature is enabled the hosts in the OpenStack Compute
@@ -3755,12 +3685,9 @@
 #   (nova.quota.NoopQuotaDriver)
 #  (string value)
 # Allowed values: api, compute
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#cell_type = compute
-
-# DEPRECATED:
+#cell_type=compute
+
+#
 # Mute child interval.
 #
 # Number of seconds after which a lack of capability and capacity
@@ -3771,12 +3698,9 @@
 #
 # * An integer, corresponding to the interval time in seconds.
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#mute_child_interval = 300
-
-# DEPRECATED:
+#mute_child_interval=300
+
+#
 # Bandwidth update interval.
 #
 # Seconds between bandwidth usage cache updates for cells.
@@ -3785,12 +3709,9 @@
 #
 # * An integer, corresponding to the interval time in seconds.
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#bandwidth_update_interval = 600
-
-# DEPRECATED:
+#bandwidth_update_interval=600
+
+#
 # Instance update sync database limit.
 #
 # Number of instances to pull from the database at one time for
@@ -3801,12 +3722,9 @@
 #
 # * An integer, corresponding to a number of instances.
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#instance_update_sync_database_limit = 100
-
-# DEPRECATED:
+#instance_update_sync_database_limit=100
+
+#
 # Mute weight multiplier.
 #
 # Multiplier used to weigh mute children. Mute children cells are
@@ -3817,12 +3735,9 @@
 #
 # * Negative numeric number
 #  (floating point value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#mute_weight_multiplier = -10000.0
-
-# DEPRECATED:
+#mute_weight_multiplier=-10000.0
+
+#
 # Ram weight multiplier.
 #
 # Multiplier used for weighing ram. Negative numbers indicate that
@@ -3833,12 +3748,9 @@
 #
 # * Numeric multiplier
 #  (floating point value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#ram_weight_multiplier = 10.0
-
-# DEPRECATED:
+#ram_weight_multiplier=10.0
+
+#
 # Offset weight multiplier
 #
 # Multiplier used to weigh offset weigher. Cells with higher
@@ -3851,12 +3763,9 @@
 #
 # * Numeric multiplier
 #  (floating point value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#offset_weight_multiplier = 1.0
-
-# DEPRECATED:
+#offset_weight_multiplier=1.0
+
+#
 # Instance updated at threshold
 #
 # Number of seconds after an instance was updated or deleted to
@@ -3874,12 +3783,9 @@
 # * This value is used with the ``instance_update_num_instances``
 #   value in a periodic task run.
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#instance_updated_at_threshold = 3600
-
-# DEPRECATED:
+#instance_updated_at_threshold=3600
+
+#
 # Instance update num instances
 #
 # On every run of the periodic task, nova cells manager will attempt to
@@ -3897,12 +3803,9 @@
 # * This value is used with the ``instance_updated_at_threshold``
 #   value in a periodic task run.
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#instance_update_num_instances = 1
-
-# DEPRECATED:
+#instance_update_num_instances=1
+
+#
 # Maximum hop count
 #
 # When processing a targeted message, if the local cell is not the
@@ -3914,24 +3817,18 @@
 #
 # * Positive integer value
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#max_hop_count = 10
-
-# DEPRECATED:
+#max_hop_count=10
+
+#
 # Cells scheduler.
 #
 # The class of the driver used by the cells scheduler. This should be
 # the full Python path to the class to be used. If nothing is specified
 # in this option, the CellsScheduler is used.
 #  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#scheduler = nova.cells.scheduler.CellsScheduler
-
-# DEPRECATED:
+#scheduler=nova.cells.scheduler.CellsScheduler
+
+#
 # RPC driver queue base.
 #
 # When sending a message to another cell by JSON-ifying the message
@@ -3943,12 +3840,9 @@
 #
 # * The base queue name to be used when communicating between cells.
 #  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#rpc_driver_queue_base = cells.intercell
-
-# DEPRECATED:
+#rpc_driver_queue_base=cells.intercell
+
+#
 # Scheduler filter classes.
 #
 # Filter classes the cells scheduler should use. An entry of
@@ -3977,12 +3871,9 @@
 # to a particular cell.
 #
 #  (list value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#scheduler_filter_classes = nova.cells.filters.all_filters
-
-# DEPRECATED:
+#scheduler_filter_classes=nova.cells.filters.all_filters
+
+#
 # Scheduler weight classes.
 #
 # Weigher classes the cells scheduler should use. An entry of
@@ -4012,12 +3903,9 @@
 # is set to a very high value (for example, '999999999999999'), it is
 # likely to be picked if another cell do not have a higher weight.
 #  (list value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#scheduler_weight_classes = nova.cells.weights.all_weighers
-
-# DEPRECATED:
+#scheduler_weight_classes=nova.cells.weights.all_weighers
+
+#
 # Scheduler retries.
 #
 # How many retries when no cells are available. Specifies how many
@@ -4033,12 +3921,9 @@
 # * This value is used with the ``scheduler_retry_delay`` value
 #   while retrying to find a suitable cell.
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#scheduler_retries = 10
-
-# DEPRECATED:
+#scheduler_retries=10
+
+#
 # Scheduler retry delay.
 #
 # Specifies the delay (in seconds) between scheduling retries when no
@@ -4056,12 +3941,9 @@
 # * This value is used with the ``scheduler_retries`` value
 #   while retrying to find a suitable cell.
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#scheduler_retry_delay = 2
-
-# DEPRECATED:
+#scheduler_retry_delay=2
+
+#
 # DB check interval.
 #
 # Cell state manager updates cell status for all cells from the DB
@@ -4074,12 +3956,9 @@
 # * Interval time, in seconds.
 #
 #  (integer value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#db_check_interval = 60
-
-# DEPRECATED:
+#db_check_interval=60
+
+#
 # Optional cells configuration.
 #
 # Configuration file from which to read cells configuration. If given,
@@ -4130,10 +4009,7 @@
 #     }
 #
 #  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Cells v1 is being replaced with Cells v2.
-#cells_config = <None>
+#cells_config=<None>
 
 
 [cinder]
@@ -4157,8 +4033,8 @@
 #
 # * endpoint_template - Setting this option will override catalog_info
 #  (string value)
-#catalog_info = volumev3:cinderv3:publicURL
-
+#catalog_info=volumev2:cinderv2:publicURL
+catalog_info=volumev2:cinderv2:internalURL
 #
 # If this option is set then it will override service catalog lookup with
 # this template for cinder endpoint
@@ -4175,7 +4051,7 @@
 #
 # * catalog_info - If endpoint_template is not set, catalog_info will be used.
 #  (string value)
-#endpoint_template = <None>
+#endpoint_template=<None>
 
 #
 # Region name of this node. This is used when picking the URL in the service
@@ -4185,7 +4061,8 @@
 #
 # * Any string representing region name
 #  (string value)
-#os_region_name = <None>
+#os_region_name=<None>
+os_region_name = RegionOne
 
 #
 # Number of times cinderclient should retry on any failed http call.
@@ -4198,7 +4075,7 @@
 # * Any integer value. 0 means connection is attempted only once
 #  (integer value)
 # Minimum value: 0
-#http_retries = 3
+#http_retries=3
 
 #
 # Allow attach between instance and volume in different availability zones.
@@ -4214,51 +4091,101 @@
 # the build request.
 # By default there is no availability zone restriction on volume attach.
 #  (boolean value)
-#cross_az_attach = true
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-
-[compute]
+#cross_az_attach=true
+
+[cloudpipe]
 
 #
 # From nova.conf
 #
 
 #
-# Number of consecutive failed builds that result in disabling a compute
-# service.
-#
-# This option will cause nova-compute to set itself to a disabled state
-# if a certain number of consecutive build failures occur. This will
-# prevent the scheduler from continuing to send builds to a compute node that is
-# consistently failing. Note that all failures qualify and count towards this
-# score, including reschedules that may have been due to racy scheduler
-# behavior.
-# Since the failures must be consecutive, it is unlikely that occasional
-# expected
-# reschedules will actually disable a compute node.
-#
-# Possible values:
-#
-# * Any positive integer representing a build failure count.
-# * Zero to never auto-disable.
-#  (integer value)
-#consecutive_build_service_disable_threshold = 10
+# Image ID used when starting up a cloudpipe VPN client.
+#
+# An empty instance is created and configured with OpenVPN using
+# boot_script_template. This instance would be snapshotted and stored
+# in glance. ID of the stored image is used in 'vpn_image_id' to
+# create cloudpipe VPN client.
+#
+# Possible values:
+#
+# * Any valid ID of a VPN image
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vpn_image_id
+#vpn_image_id=0
+
+#
+# Flavor for VPN instances.
+#
+# Possible values:
+#
+# * Any valid flavor name
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vpn_flavor
+#vpn_flavor=m1.tiny
+
+#
+# Template for cloudpipe instance boot script.
+#
+# Possible values:
+#
+# * Any valid path to a cloudpipe instance boot script template
+#
+# Related options:
+#
+# The following options are required to configure cloudpipe-managed
+# OpenVPN server.
+#
+# * dmz_net
+# * dmz_mask
+# * cnt_vpn_clients
+#  (string value)
+# Deprecated group/name - [DEFAULT]/boot_script_template
+#boot_script_template=$pybasedir/nova/cloudpipe/bootscript.template
+
+#
+# Network to push into OpenVPN config.
+#
+# Note: Above mentioned OpenVPN config can be found at
+# /etc/openvpn/server.conf.
+#
+# Possible values:
+#
+# * Any valid IPv4/IPV6 address
+#
+# Related options:
+#
+# * boot_script_template - dmz_net is pushed into bootscript.template
+#   to configure cloudpipe-managed OpenVPN server
+#  (IP address value)
+# Deprecated group/name - [DEFAULT]/dmz_net
+#dmz_net=10.0.0.0
+
+#
+# Netmask to push into OpenVPN config.
+#
+# Possible values:
+#
+# * Any valid IPv4/IPV6 netmask
+#
+# Related options:
+#
+# * dmz_net - dmz_net and dmz_mask is pushed into bootscript.template
+#   to configure cloudpipe-managed OpenVPN server
+# * boot_script_template
+#  (IP address value)
+# Deprecated group/name - [DEFAULT]/dmz_mask
+#dmz_mask=255.255.255.0
+
+#
+# Suffix to add to project name for VPN key and secgroups
+#
+# Possible values:
+#
+# * Any string value representing the VPN key suffix
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vpn_key_suffix
+#vpn_key_suffix=-vpn
 
 
 [conductor]
@@ -4280,14 +4207,14 @@
 # There is no need to let users choose the RPC topic for all services - there
 # is little gain from this. Furthermore, it makes it really easy to break Nova
 # by using this option.
-#topic = conductor
+#topic=conductor
 
 #
 # Number of workers for OpenStack Conductor service. The default will be the
 # number of CPUs available.
 #  (integer value)
-#workers = <None>
-
+#workers=<None>
+workers = 1
 
 [console]
 #
@@ -4331,7 +4258,7 @@
 #  (integer value)
 # Minimum value: 0
 # Deprecated group/name - [DEFAULT]/console_token_ttl
-#token_ttl = 600
+#token_ttl=600
 
 
 [cors]
@@ -4343,24 +4270,58 @@
 # Indicate whether this resource may be shared with the domain received in the
 # requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
 # slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
+#allowed_origin=<None>
+
 
 # Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
+#allow_credentials=true
+
 
 # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
 # Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Service-Token
+#expose_headers=X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Service-Token
+
 
 # Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
+#max_age=3600
+
 
 # Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
+#allow_methods=GET,PUT,POST,DELETE,PATCH
+
 
 # Indicate which header field names may be used during the actual request. (list
 # value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id
+#allow_headers=X-Auth-Token,X-Openstack-Request-Id,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id
+
+
+[cors.subdomain]
+
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin=<None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials=true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers=X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Service-Token
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age=3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods=GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request. (list
+# value)
+#allow_headers=X-Auth-Token,X-Openstack-Request-Id,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id
 
 
 [crypto]
@@ -4381,7 +4342,8 @@
 #
 # * ca_path
 #  (string value)
-#ca_file = cacert.pem
+# Deprecated group/name - [DEFAULT]/ca_file
+#ca_file=cacert.pem
 
 #
 # Filename of a private key.
@@ -4390,7 +4352,8 @@
 #
 # * keys_path
 #  (string value)
-#key_file = private/cakey.pem
+# Deprecated group/name - [DEFAULT]/key_file
+#key_file=private/cakey.pem
 
 #
 # Filename of root Certificate Revocation List (CRL). This is a list of
@@ -4401,7 +4364,8 @@
 #
 # * ca_path
 #  (string value)
-#crl_file = crl.pem
+# Deprecated group/name - [DEFAULT]/crl_file
+#crl_file=crl.pem
 
 #
 # Directory path where keys are located.
@@ -4410,7 +4374,8 @@
 #
 # * key_file
 #  (string value)
-#keys_path = $state_path/keys
+# Deprecated group/name - [DEFAULT]/keys_path
+#keys_path=$state_path/keys
 
 #
 # Directory path where root CA is located.
@@ -4419,125 +4384,144 @@
 #
 # * ca_file
 #  (string value)
-#ca_path = $state_path/CA
+# Deprecated group/name - [DEFAULT]/ca_path
+#ca_path=$state_path/CA
 
 # Option to enable/disable use of CA for each project. (boolean value)
-#use_project_ca = false
+# Deprecated group/name - [DEFAULT]/use_project_ca
+#use_project_ca=false
 
 #
 # Subject for certificate for users, %s for
 # project, user, timestamp
 #  (string value)
-#user_cert_subject = /C=US/ST=California/O=OpenStack/OU=NovaDev/CN=%.16s-%.16s-%s
+# Deprecated group/name - [DEFAULT]/user_cert_subject
+#user_cert_subject=/C=US/ST=California/O=OpenStack/OU=NovaDev/CN=%.16s-%.16s-%s
 
 #
 # Subject for certificate for projects, %s for
 # project, timestamp
 #  (string value)
-#project_cert_subject = /C=US/ST=California/O=OpenStack/OU=NovaDev/CN=project-ca-%.16s-%s
+# Deprecated group/name - [DEFAULT]/project_cert_subject
+#project_cert_subject=/C=US/ST=California/O=OpenStack/OU=NovaDev/CN=project-ca-%.16s-%s
 
 
 [database]
-connection = sqlite:////var/lib/nova/nova.sqlite
 
 #
 # From oslo.db
 #
 
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect the
+# database.
+#sqlite_db=oslo.sqlite
+idle_timeout = 180
+min_pool_size = 100
+max_pool_size = 700
+max_overflow = 100
+retry_interval = 5
+max_retries = -1
+db_max_retries = 3
+db_retry_interval = 1
+connection_debug = 10
+pool_timeout = 120
+connection = mysql+pymysql://nova:opnfv_secret@172.16.10.36/nova?charset=utf8
+
 # If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous=true
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
+#backend=sqlalchemy
 
 # The SQLAlchemy connection string to use to connect to the database. (string
 # value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-#connection = <None>
+#connection=<None>
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
-#slave_connection = <None>
+#slave_connection=<None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
 # default, overrides any server-set SQL mode. To use whatever SQL mode is set by
 # the server configuration, set this to no value. Example: mysql_sql_mode=
 # (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
+#mysql_sql_mode=TRADITIONAL
 
 # Timeout before idle SQL connections are reaped. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
-#idle_timeout = 3600
+#idle_timeout=3600
 
 # Minimum number of SQL connections to keep open in a pool. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-#min_pool_size = 1
+#min_pool_size=1
 
 # Maximum number of SQL connections to keep open in a pool. Setting a value of 0
 # indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
+#max_pool_size=5
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
+#max_retries=10
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
+#retry_interval=10
 
 # If set, use this value for max_overflow with SQLAlchemy. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
+#max_overflow=50
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
+#connection_debug=0
 
 # Add Python stack traces to SQL as comment strings. (boolean value)
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
+#connection_trace=false
 
 # If set, use this value for pool_timeout with SQLAlchemy. (integer value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
+#pool_timeout=<None>
 
 # Enable the experimental use of database reconnect on connection lost. (boolean
 # value)
-#use_db_reconnect = false
+#use_db_reconnect=false
 
 # Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
+#db_retry_interval=1
 
 # If True, increases the interval between retries of a database operation up to
 # db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
+#db_inc_retry_interval=true
 
 # If db_inc_retry_interval is set, the maximum seconds between retries of a
 # database operation. (integer value)
-#db_max_retry_interval = 10
+#db_max_retry_interval=10
 
 # Maximum retries in case of connection error or deadlock error before error is
 # raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
+#db_max_retries=20
 
 #
 # From oslo.db.concurrency
@@ -4546,7 +4530,7 @@
 # Enable the experimental use of thread pooling for all DB API calls (boolean
 # value)
 # Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
+#use_tpool=false
 
 
 [ephemeral_storage_encryption]
@@ -4558,21 +4542,19 @@
 #
 # Enables/disables LVM ephemeral storage encryption.
 #  (boolean value)
-#enabled = false
+#enabled=false
 
 #
 # Cipher-mode string to be used.
 #
 # The cipher and mode to be used to encrypt ephemeral storage. The set of
-# cipher-mode combinations available depends on kernel support. According
-# to the dm-crypt documentation, the cipher is expected to be in the format:
-# "<cipher>-<chainmode>-<ivmode>".
+# cipher-mode combinations available depends on kernel support.
 #
 # Possible values:
 #
 # * Any crypto option listed in ``/proc/crypto``.
 #  (string value)
-#cipher = aes-xts-plain64
+#cipher=aes-xts-plain64
 
 #
 # Encryption key length in bits.
@@ -4581,7 +4563,7 @@
 # In XTS mode only half of the bits are used for encryption key.
 #  (integer value)
 # Minimum value: 1
-#key_size = 512
+#key_size=512
 
 
 [filter_scheduler]
@@ -4613,7 +4595,8 @@
 #  (integer value)
 # Minimum value: 1
 # Deprecated group/name - [DEFAULT]/scheduler_host_subset_size
-#host_subset_size = 1
+#host_subset_size=1
+host_subset_size=30
 
 #
 # The number of instances that can be actively performing IO on a host.
@@ -4630,7 +4613,9 @@
 # * An integer, where the integer corresponds to the max number of instances
 #   that can be actively performing IO on any given host.
 #  (integer value)
-#max_io_ops_per_host = 8
+# Deprecated group/name - [DEFAULT]/max_io_ops_per_host
+#max_io_ops_per_host=8
+max_io_ops_per_host=8
 
 #
 # Maximum number of instances that be active on a host.
@@ -4650,8 +4635,9 @@
 # * An integer, where the integer corresponds to the max instances that can be
 #   scheduled on a host.
 #  (integer value)
-# Minimum value: 1
-#max_instances_per_host = 50
+# Deprecated group/name - [DEFAULT]/max_instances_per_host
+#max_instances_per_host=50
+max_instances_per_host=50
 
 #
 # Enable querying of individual hosts for instance information.
@@ -4670,14 +4656,9 @@
 #
 # This option is only used by the FilterScheduler and its subclasses; if you use
 # a different scheduler, this option has no effect.
-#
-# NOTE: In a multi-cell (v2) setup where the cell MQ is separated from the
-# top-level, computes cannot directly communicate with the scheduler. Thus,
-# this option cannot be enabled in that scenario. See also the
-# [workarounds]/disable_group_policy_check_upcall option.
 #  (boolean value)
 # Deprecated group/name - [DEFAULT]/scheduler_tracks_instance_changes
-#track_instance_changes = true
+#track_instance_changes=true
 
 #
 # Filters that the scheduler can use.
@@ -4702,13 +4683,18 @@
 # * scheduler_enabled_filters
 #  (multi valued)
 # Deprecated group/name - [DEFAULT]/scheduler_available_filters
-#available_filters = nova.scheduler.filters.all_filters
+#available_filters=nova.scheduler.filters.all_filters
+available_filters=nova.scheduler.filters.all_filters
+available_filters=nova.scheduler.filters.pci_passthrough_filter.PciPassthroughFilter
+
 
 #
 # Filters that the scheduler will use.
 #
 # An ordered list of filter class names that will be used for filtering
-# hosts. These filters will be applied in the order they are listed so
+# hosts. Ignore the word 'default' in the name of this option: these filters
+# will
+# *always* be applied, and they will be applied in the order they are listed so
 # place your most restrictive filters first to make the filtering process more
 # efficient.
 #
@@ -4727,9 +4713,10 @@
 #   exception will be raised.
 #  (list value)
 # Deprecated group/name - [DEFAULT]/scheduler_default_filters
-#enabled_filters = RetryFilter,AvailabilityZoneFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter
-
-# DEPRECATED:
+#enabled_filters=RetryFilter,AvailabilityZoneFilter,RamFilter,DiskFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter
+enabled_filters=DifferentHostFilter,SameHostFilter,RetryFilter,AvailabilityZoneFilter,RamFilter,CoreFilter,DiskFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter
+
+#
 # Filters used for filtering baremetal hosts.
 #
 # Filters are applied in order, so place your most restrictive filters first to
@@ -4749,16 +4736,9 @@
 #   no effect.
 #  (list value)
 # Deprecated group/name - [DEFAULT]/baremetal_scheduler_default_filters
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# These filters were used to overcome some of the baremetal scheduling
-# limitations in Nova prior to the use of the Placement API. Now scheduling will
-# use the custom resource class defined for each baremetal node to make its
-# selection.
-#baremetal_enabled_filters = RetryFilter,AvailabilityZoneFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ExactRamFilter,ExactDiskFilter,ExactCoreFilter
-
-# DEPRECATED:
+#baremetal_enabled_filters=RetryFilter,AvailabilityZoneFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ExactRamFilter,ExactDiskFilter,ExactCoreFilter
+
+#
 # Enable baremetal filters.
 #
 # Set this to True to tell the nova scheduler that it should use the filters
@@ -4775,14 +4755,8 @@
 #   specified in 'scheduler_enabled_filters'.
 #  (boolean value)
 # Deprecated group/name - [DEFAULT]/scheduler_use_baremetal_filters
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# These filters were used to overcome some of the baremetal scheduling
-# limitations in Nova prior to the use of the Placement API. Now scheduling will
-# use the custom resource class defined for each baremetal node to make its
-# selection.
-#use_baremetal_filters = false
+#use_baremetal_filters=false
+use_baremetal_filters=false
 
 #
 # Weighers that the scheduler will use.
@@ -4804,7 +4778,7 @@
 #   a weigher that will be used for selecting a host
 #  (list value)
 # Deprecated group/name - [DEFAULT]/scheduler_weight_classes
-#weight_classes = nova.scheduler.weights.all_weighers
+#weight_classes=nova.scheduler.weights.all_weighers
 
 #
 # Ram weight multipler ratio.
@@ -4828,7 +4802,8 @@
 # * An integer or float value, where the value corresponds to the multipler
 #   ratio for this weigher.
 #  (floating point value)
-#ram_weight_multiplier = 1.0
+# Deprecated group/name - [DEFAULT]/ram_weight_multiplier
+#ram_weight_multiplier=1.0
 
 #
 # Disk weight multipler ratio.
@@ -4838,14 +4813,15 @@
 #
 # This option is only used by the FilterScheduler and its subclasses; if you use
 # a different scheduler, this option has no effect. Also note that this setting
-# only affects scheduling if the 'disk' weigher is enabled.
+# only affects scheduling if the 'ram' weigher is enabled.
 #
 # Possible values:
 #
 # * An integer or float value, where the value corresponds to the multipler
 #   ratio for this weigher.
 #  (floating point value)
-#disk_weight_multiplier = 1.0
+# Deprecated group/name - [DEFAULT]/disk_weight_multiplier
+#disk_weight_multiplier=1.0
 
 #
 # IO operations weight multipler ratio.
@@ -4870,25 +4846,8 @@
 # * An integer or float value, where the value corresponds to the multipler
 #   ratio for this weigher.
 #  (floating point value)
-#io_ops_weight_multiplier = -1.0
-
-#
-# PCI device affinity weight multiplier.
-#
-# The PCI device affinity weighter computes a weighting based on the number of
-# PCI devices on the host and the number of PCI devices requested by the
-# instance. The ``NUMATopologyFilter`` filter must be enabled for this to have
-# any significance. For more information, refer to the filter documentation:
-#
-#     https://docs.openstack.org/developer/nova/filter_scheduler.html
-#
-# Possible values:
-#
-# * A positive integer or float value, where the value corresponds to the
-#   multiplier ratio for this weigher.
-#  (floating point value)
-# Minimum value: 0
-#pci_weight_multiplier = 1.0
+# Deprecated group/name - [DEFAULT]/io_ops_weight_multiplier
+#io_ops_weight_multiplier=-1.0
 
 #
 # Multiplier used for weighing hosts for group soft-affinity.
@@ -4899,7 +4858,8 @@
 #   for hosts with group soft affinity. Only a positive value are meaningful, as
 #   negative values would make this behave as a soft anti-affinity weigher.
 #  (floating point value)
-#soft_affinity_weight_multiplier = 1.0
+# Deprecated group/name - [DEFAULT]/soft_affinity_weight_multiplier
+#soft_affinity_weight_multiplier=1.0
 
 #
 # Multiplier used for weighing hosts for group soft-anti-affinity.
@@ -4911,7 +4871,8 @@
 #   meaningful, as negative values would make this behave as a soft affinity
 #   weigher.
 #  (floating point value)
-#soft_anti_affinity_weight_multiplier = 1.0
+# Deprecated group/name - [DEFAULT]/soft_anti_affinity_weight_multiplier
+#soft_anti_affinity_weight_multiplier=1.0
 
 #
 # List of UUIDs for images that can only be run on certain hosts.
@@ -4933,6 +4894,7 @@
 # * scheduler/isolated_hosts
 # * scheduler/restrict_isolated_hosts_to_isolated_images
 #  (list value)
+# Deprecated group/name - [DEFAULT]/isolated_images
 #isolated_images =
 
 #
@@ -4954,6 +4916,7 @@
 # * scheduler/isolated_images
 # * scheduler/restrict_isolated_hosts_to_isolated_images
 #  (list value)
+# Deprecated group/name - [DEFAULT]/isolated_hosts
 #isolated_hosts =
 
 #
@@ -4970,7 +4933,8 @@
 # * scheduler/isolated_images
 # * scheduler/isolated_hosts
 #  (boolean value)
-#restrict_isolated_hosts_to_isolated_images = true
+# Deprecated group/name - [DEFAULT]/restrict_isolated_hosts_to_isolated_images
+#restrict_isolated_hosts_to_isolated_images=true
 
 #
 # Image property namespace for use in the host aggregate.
@@ -4998,7 +4962,8 @@
 #
 # * aggregate_image_properties_isolation_separator
 #  (string value)
-#aggregate_image_properties_isolation_namespace = <None>
+# Deprecated group/name - [DEFAULT]/aggregate_image_properties_isolation_namespace
+#aggregate_image_properties_isolation_namespace=<None>
 
 #
 # Separator character(s) for image property namespace and name.
@@ -5022,7 +4987,8 @@
 #
 # * aggregate_image_properties_isolation_namespace
 #  (string value)
-#aggregate_image_properties_isolation_separator = .
+# Deprecated group/name - [DEFAULT]/aggregate_image_properties_isolation_separator
+#aggregate_image_properties_isolation_separator=.
 
 
 [glance]
@@ -5043,7 +5009,16 @@
 # "scheme://hostname:port[/path]"
 #   (i.e. "http://10.0.1.0:9292" or "https://my.glance.server/image").
 #  (list value)
-#api_servers = <None>
+#api_servers=<None>
+api_servers = http://172.16.10.36:9292
+
+#
+# Enable insecure SSL (https) requests to glance.
+#
+# This setting can be used to turn off verification of the glance server
+# certificate against the certificate authorities.
+#  (boolean value)
+#api_insecure=false
 
 #
 # Enable glance operation retries.
@@ -5052,7 +5027,7 @@
 # an image to / from glance. 0 means no retries.
 #  (integer value)
 # Minimum value: 0
-#num_retries = 0
+#num_retries=0
 
 #
 # List of url schemes that can be directly accessed.
@@ -5083,74 +5058,11 @@
 #
 # * The options in the `key_manager` group, as the key_manager is used
 #   for the signature validation.
-# * Both enable_certificate_validation and default_trusted_certificate_ids
-#   below depend on this option being enabled.
 #  (boolean value)
-#verify_glance_signatures = false
-
-# DEPRECATED:
-# Enable certificate validation for image signature verification.
-#
-# During image signature verification nova will first verify the validity of the
-# image's signing certificate using the set of trusted certificates associated
-# with the instance. If certificate validation fails, signature verification
-# will not be performed and the image will be placed into an error state. This
-# provides end users with stronger assurances that the image data is unmodified
-# and trustworthy. If left disabled, image signature verification can still
-# occur but the end user will not have any assurance that the signing
-# certificate used to generate the image signature is still trustworthy.
-#
-# Related options:
-#
-# * This option only takes effect if verify_glance_signatures is enabled.
-# * The value of default_trusted_certificate_ids may be used when this option
-#   is enabled.
-#  (boolean value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is intended to ease the transition for deployments leveraging
-# image signature verification. The intended state long-term is for signature
-# verification and certificate validation to always happen together.
-#enable_certificate_validation = false
-
-#
-# List of certificate IDs for certificates that should be trusted.
-#
-# May be used as a default list of trusted certificate IDs for certificate
-# validation. The value of this option will be ignored if the user provides a
-# list of trusted certificate IDs with an instance API request. The value of
-# this option will be persisted with the instance data if signature verification
-# and certificate validation are enabled and if the user did not provide an
-# alternative list. If left empty when certificate validation is enabled the
-# user must provide a list of trusted certificate IDs otherwise certificate
-# validation will fail.
-#
-# Related options:
-#
-# * The value of this option may be used if both verify_glance_signatures and
-#   enable_certificate_validation are enabled.
-#  (list value)
-#default_trusted_certificate_ids =
+#verify_glance_signatures=false
 
 # Enable or disable debug logging with glanceclient. (boolean value)
-#debug = false
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
+#debug=false
 
 
 [guestfs]
@@ -5180,7 +5092,7 @@
 #     * libvirt.inject_partition
 #     * libvirt.inject_password
 #  (boolean value)
-#debug = false
+#debug=false
 
 
 [healthcheck]
@@ -5192,10 +5104,10 @@
 # DEPRECATED: The path to respond to healtcheck requests on. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#path = /healthcheck
+#path=/healthcheck
 
 # Show more detailed information as part of the response (boolean value)
-#detailed = false
+#detailed=false
 
 # Additional backends that can perform health checks and report that information
 # back as part of a request. (list value)
@@ -5203,7 +5115,7 @@
 
 # Check the presence of a file to determine if an application is running on a
 # port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
+#disable_by_file_path=<None>
 
 # Check the presence of a file based on a port to determine if an application is
 # running on a port. Expects a "port:path" list of strings. Used by
@@ -5235,7 +5147,7 @@
 # * Float values greater than 1.0: Enables allocation of total implied
 #   RAM divided by this value for startup.
 #  (floating point value)
-#dynamic_memory_ratio = 1.0
+#dynamic_memory_ratio=1.0
 
 #
 # Enable instance metrics collection
@@ -5244,7 +5156,7 @@
 # metric APIs. Collected data can by retrieved by other apps and
 # services, e.g.: Ceilometer.
 #  (boolean value)
-#enable_instance_metrics_collection = false
+#enable_instance_metrics_collection=false
 
 #
 # Instances path share
@@ -5273,7 +5185,7 @@
 # different CPU features and checked during instance creation
 # in order to limit the CPU features used by the instance.
 #  (boolean value)
-#limit_cpu_features = false
+#limit_cpu_features=false
 
 #
 # Mounted disk query retry count
@@ -5293,7 +5205,7 @@
 #   "mounted_disk_query_retry_interval" option.
 #  (integer value)
 # Minimum value: 0
-#mounted_disk_query_retry_count = 10
+#mounted_disk_query_retry_count=10
 
 #
 # Mounted disk query retry interval
@@ -5312,7 +5224,7 @@
 #   mounted_disk_query_retry_interval configuration options.
 #  (integer value)
 # Minimum value: 0
-#mounted_disk_query_retry_interval = 5
+#mounted_disk_query_retry_interval=5
 
 #
 # Power state check timeframe
@@ -5326,7 +5238,7 @@
 # * Timeframe in seconds (Default: 60).
 #  (integer value)
 # Minimum value: 0
-#power_state_check_timeframe = 60
+#power_state_check_timeframe=60
 
 #
 # Power state event polling interval
@@ -5342,7 +5254,7 @@
 # * Time in seconds (Default: 2).
 #  (integer value)
 # Minimum value: 0
-#power_state_event_polling_interval = 2
+#power_state_event_polling_interval=2
 
 #
 # qemu-img command
@@ -5371,7 +5283,7 @@
 #   set the mkisofs_cmd value to the full path to an mkisofs.exe
 #   installation.
 #  (string value)
-#qemu_img_cmd = qemu-img.exe
+#qemu_img_cmd=qemu-img.exe
 
 #
 # External virtual switch name
@@ -5391,7 +5303,7 @@
 #   is used. This list is queried using WQL.
 # * Virtual switch name.
 #  (string value)
-#vswitch_name = <None>
+#vswitch_name=<None>
 
 #
 # Wait soft reboot seconds
@@ -5405,7 +5317,7 @@
 # * Time in seconds (Default: 60).
 #  (integer value)
 # Minimum value: 0
-#wait_soft_reboot_seconds = 60
+#wait_soft_reboot_seconds=60
 
 #
 # Configuration drive cdrom
@@ -5434,7 +5346,7 @@
 # * You can configure the Compute service to always create a configuration
 #   drive by setting the force_config_drive option to 'True'.
 #  (boolean value)
-#config_drive_cdrom = false
+#config_drive_cdrom=false
 
 #
 # Configuration drive inject password
@@ -5447,7 +5359,7 @@
 #   configuration drive usage with Hyper-V, such as force_config_drive.
 # * Currently, the only accepted config_drive_format is 'iso9660'.
 #  (boolean value)
-#config_drive_inject_password = false
+#config_drive_inject_password=false
 
 #
 # Volume attach retry count
@@ -5465,7 +5377,7 @@
 #   volume_attach_retry_interval option.
 #  (integer value)
 # Minimum value: 0
-#volume_attach_retry_count = 10
+#volume_attach_retry_count=10
 
 #
 # Volume attach retry interval
@@ -5484,7 +5396,7 @@
 #   volume_attach_retry_interval configuration options.
 #  (integer value)
 # Minimum value: 0
-#volume_attach_retry_interval = 5
+#volume_attach_retry_interval=5
 
 #
 # Enable RemoteFX feature
@@ -5512,7 +5424,7 @@
 #
 #     64, 128, 256, 512, 1024
 #  (boolean value)
-#enable_remotefx = false
+#enable_remotefx=false
 
 #
 # Use multipath connections when attaching iSCSI or FC disks.
@@ -5520,7 +5432,7 @@
 # This requires the Multipath IO Windows feature to be enabled. MPIO must be
 # configured to claim such devices.
 #  (boolean value)
-#use_multipath_io = false
+#use_multipath_io=false
 
 #
 # List of iSCSI initiators that will be used for estabilishing iSCSI sessions.
@@ -5531,113 +5443,25 @@
 #iscsi_initiator_list =
 
 
-[ironic]
-#
-# Configuration options for Ironic driver (Bare Metal).
-# If using the Ironic driver following options must be set:
-# * auth_type
-# * auth_url
-# * project_name
-# * username
-# * password
-# * project_domain_id or project_domain_name
-# * user_domain_id or user_domain_name
+[image_file_url]
 
 #
 # From nova.conf
 #
 
-# URL override for the Ironic API endpoint. (uri value)
-#api_endpoint = http://ironic.example.org:6385/
-
-#
-# The number of times to retry when a request conflicts.
-# If set to 0, only try once, no retries.
-#
-# Related options:
-#
-# * api_retry_interval
-#  (integer value)
-# Minimum value: 0
-#api_max_retries = 60
-
-#
-# The number of seconds to wait before retrying the request.
-#
-# Related options:
-#
-# * api_max_retries
-#  (integer value)
-# Minimum value: 0
-#api_retry_interval = 2
-
-# Timeout (seconds) to wait for node serial console state changed. Set to 0 to
-# disable timeout. (integer value)
-# Minimum value: 0
-#serial_console_state_timeout = 10
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Authentication type to load (string value)
-# Deprecated group/name - [ironic]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-# Authentication URL (string value)
-#auth_url = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
-
-# User ID (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [ironic]/user_name
-#username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
+# DEPRECATED:
+# List of file systems that are configured in this file in the
+# image_file_url:<list entry name> sections
+#  (list value)
+# This option is deprecated for removal since 14.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The feature to download images from glance via filesystem is not used and will
+# be removed in the future.
+#filesystems =
+
+
+
 
 
 [key_manager]
@@ -5653,95 +5477,71 @@
 #
 # * Empty string or a key in hex value
 #  (string value)
-#fixed_key = <None>
+# Deprecated group/name - [keymgr]/fixed_key
+#fixed_key=<None>
 
 # The full class name of the key manager API class (string value)
-#api_class = castellan.key_manager.barbican_key_manager.BarbicanKeyManager
 
 # The type of authentication credential to create. Possible values are 'token',
 # 'password', 'keystone_token', and 'keystone_password'. Required if no context
 # is passed to the credential factory. (string value)
-#auth_type = <None>
+#auth_type=<None>
 
 # Token for authentication. Required for 'token' and 'keystone_token' auth_type
 # if no context is passed to the credential factory. (string value)
-#token = <None>
+#token=<None>
 
 # Username for authentication. Required for 'password' auth_type. Optional for
 # the 'keystone_password' auth_type. (string value)
-#username = <None>
+#username=<None>
 
 # Password for authentication. Required for 'password' and 'keystone_password'
 # auth_type. (string value)
-#password = <None>
+#password=<None>
 
 # User ID for authentication. Optional for 'keystone_token' and
 # 'keystone_password' auth_type. (string value)
-#user_id = <None>
+#user_id=<None>
 
 # User's domain ID for authentication. Optional for 'keystone_token' and
 # 'keystone_password' auth_type. (string value)
-#user_domain_id = <None>
+#user_domain_id=<None>
 
 # User's domain name for authentication. Optional for 'keystone_token' and
 # 'keystone_password' auth_type. (string value)
-#user_domain_name = <None>
+#user_domain_name=<None>
 
 # Trust ID for trust scoping. Optional for 'keystone_token' and
 # 'keystone_password' auth_type. (string value)
-#trust_id = <None>
+#trust_id=<None>
 
 # Domain ID for domain scoping. Optional for 'keystone_token' and
 # 'keystone_password' auth_type. (string value)
-#domain_id = <None>
+#domain_id=<None>
 
 # Domain name for domain scoping. Optional for 'keystone_token' and
 # 'keystone_password' auth_type. (string value)
-#domain_name = <None>
+#domain_name=<None>
 
 # Project ID for project scoping. Optional for 'keystone_token' and
 # 'keystone_password' auth_type. (string value)
-#project_id = <None>
+#project_id=<None>
 
 # Project name for project scoping. Optional for 'keystone_token' and
 # 'keystone_password' auth_type. (string value)
-#project_name = <None>
+#project_name=<None>
 
 # Project's domain ID for project. Optional for 'keystone_token' and
 # 'keystone_password' auth_type. (string value)
-#project_domain_id = <None>
+#project_domain_id=<None>
 
 # Project's domain name for project. Optional for 'keystone_token' and
 # 'keystone_password' auth_type. (string value)
-#project_domain_name = <None>
+#project_domain_name=<None>
 
 # Allow fetching a new token if the current one is going to expire. Optional for
 # 'keystone_token' and 'keystone_password' auth_type. (boolean value)
-#reauthenticate = true
-
-
-[keystone]
-# Configuration options for the identity service
-
-#
-# From nova.conf
-#
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
+#reauthenticate=true
 
 
 [keystone_authtoken]
@@ -5749,52 +5549,62 @@
 #
 # From keystonemiddleware.auth_token
 #
-
+revocation_cache_time = 10
+signing_dir=/tmp/keystone-signing-nova
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = nova
+password = opnfv_secret
+auth_uri=http://172.16.10.36:5000
+auth_url=http://172.16.10.36:35357
+memcached_servers=172.16.10.36:11211
 # Complete "public" Identity API endpoint. This endpoint should not be an
 # "admin" endpoint, as it should be accessible by all end users. Unauthenticated
 # clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
-#auth_uri = <None>
+# endpoint should  ideally be unversioned, client support in the wild varies.
+# If you're using a versioned v2 endpoint here, then this  should *not* be the
+# same endpoint the service user utilizes  for validating tokens, because normal
+# end users may not be  able to reach that endpoint. (string value)
+#auth_uri=<None>
 
 # API version of the admin Identity API endpoint. (string value)
-#auth_version = <None>
+#auth_version=<None>
 
 # Do not handle authorization requests within the middleware, but delegate the
 # authorization decision to downstream WSGI components. (boolean value)
-#delay_auth_decision = false
+#delay_auth_decision=false
 
 # Request timeout value for communicating with Identity API server. (integer
 # value)
-#http_connect_timeout = <None>
+#http_connect_timeout=<None>
 
 # How many times are we trying to reconnect when communicating with Identity API
 # Server. (integer value)
-#http_request_max_retries = 3
+#http_request_max_retries=3
 
 # Request environment key where the Swift cache object is stored. When
 # auth_token middleware is deployed with a Swift cache, use this option to have
 # the middleware share a caching backend with swift. Otherwise, use the
 # ``memcached_servers`` option instead. (string value)
-#cache = <None>
+#cache=<None>
 
 # Required if identity server requires client certificate (string value)
-#certfile = <None>
+#certfile=<None>
 
 # Required if identity server requires client certificate (string value)
-#keyfile = <None>
+#keyfile=<None>
 
 # A PEM encoded Certificate Authority to use when verifying HTTPs connections.
 # Defaults to system CAs. (string value)
-#cafile = <None>
+#cafile=<None>
 
 # Verify HTTPS connections. (boolean value)
-#insecure = false
+#insecure=false
 
 # The region in which the identity server can be found. (string value)
-#region_name = <None>
+#region_name=<None>
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P release.
@@ -5802,17 +5612,17 @@
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
-#signing_dir = <None>
+#signing_dir=<None>
 
 # Optionally specify a list of memcached server(s) to use for caching. If left
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
-#memcached_servers = <None>
+#memcached_servers=<None>
 
 # In order to prevent excessive effort spent validating tokens, the middleware
 # caches previously-seen tokens for a configurable duration (in seconds). Set to
 # -1 to disable caching completely. (integer value)
-#token_cache_time = 300
+#token_cache_time=300
 
 # DEPRECATED: Determines the frequency at which the list of revoked tokens is
 # retrieved from the Identity service (in seconds). A high number of revocation
@@ -5822,7 +5632,7 @@
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
+#revocation_cache_time=10
 
 # (Optional) If defined, indicate whether token data should be authenticated or
 # authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
@@ -5830,40 +5640,40 @@
 # cache. If the value is not one of these options or empty, auth_token will
 # raise an exception on initialization. (string value)
 # Allowed values: None, MAC, ENCRYPT
-#memcache_security_strategy = None
+#memcache_security_strategy=None
 
 # (Optional, mandatory if memcache_security_strategy is defined) This string is
 # used for key derivation. (string value)
-#memcache_secret_key = <None>
+#memcache_secret_key=<None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
-#memcache_pool_dead_retry = 300
+#memcache_pool_dead_retry=300
 
 # (Optional) Maximum total number of open connections to every memcached server.
 # (integer value)
-#memcache_pool_maxsize = 10
+#memcache_pool_maxsize=10
 
 # (Optional) Socket timeout in seconds for communicating with a memcached
 # server. (integer value)
-#memcache_pool_socket_timeout = 3
+#memcache_pool_socket_timeout=3
 
 # (Optional) Number of seconds a connection to memcached is held unused in the
 # pool before it is closed. (integer value)
-#memcache_pool_unused_timeout = 60
+#memcache_pool_unused_timeout=60
 
 # (Optional) Number of seconds that an operation will wait to get a memcached
 # client connection from the pool. (integer value)
-#memcache_pool_conn_get_timeout = 10
+#memcache_pool_conn_get_timeout=10
 
 # (Optional) Use the advanced (eventlet safe) memcached client pool. The
 # advanced pool will only work under python 2.x. (boolean value)
-#memcache_use_advanced_pool = false
+#memcache_use_advanced_pool=false
 
 # (Optional) Indicate whether to set the X-Service-Catalog header. If False,
 # middleware will not ask for service catalog on token validation and will not
 # set the X-Service-Catalog header. (boolean value)
-#include_service_catalog = true
+#include_service_catalog=true
 
 # Used to control the use and type of token binding. Can be set to: "disabled"
 # to not check token binding. "permissive" (default) to validate binding
@@ -5872,7 +5682,7 @@
 # be rejected. "required" any form of token binding is needed to be allowed.
 # Finally the name of a binding method that must be present in tokens. (string
 # value)
-#enforce_token_bind = permissive
+#enforce_token_bind=permissive
 
 # DEPRECATED: If true, the revocation list will be checked for cached tokens.
 # This requires that PKI tokens are configured on the identity server. (boolean
@@ -5880,7 +5690,7 @@
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
-#check_revocations_for_cached = false
+#check_revocations_for_cached=false
 
 # DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
 # single algorithm or multiple. The algorithms are those supported by Python
@@ -5893,7 +5703,7 @@
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
-#hash_algorithms = md5
+#hash_algorithms=md5
 
 # A choice of roles that must be present in a service token. Service tokens are
 # allowed to request that an expired token can be used and so this check should
@@ -5901,13 +5711,13 @@
 # here are applied as an ANY check so any role in this list must be present. For
 # backwards compatibility reasons this currently only affects the allow_expired
 # check. (list value)
-#service_token_roles = service
+#service_token_roles=service
 
 # For backwards compatibility reasons we must let valid service tokens pass that
 # don't pass the service_token_roles check as valid. Setting this true will
 # become the default in a future release and should be enabled if possible.
 # (boolean value)
-#service_token_roles_required = false
+#service_token_roles_required=false
 
 # Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
 # (string value)
@@ -5915,43 +5725,43 @@
 
 # Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
 # (string value)
-#auth_host = 127.0.0.1
+#auth_host=127.0.0.1
 
 # Port of the admin Identity API endpoint. Deprecated, use identity_uri.
 # (integer value)
-#auth_port = 35357
+#auth_port=35357
 
 # Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
 # (string value)
 # Allowed values: http, https
-#auth_protocol = https
+#auth_protocol=https
 
 # Complete admin Identity API endpoint. This should specify the unversioned root
 # endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
+#identity_uri=<None>
 
 # This option is deprecated and may be removed in a future release. Single
 # shared secret with the Keystone configuration used for bootstrapping a
 # Keystone installation, or otherwise bypassing the normal authentication
 # process. This option should not be used, use `admin_user` and `admin_password`
 # instead. (string value)
-#admin_token = <None>
+#admin_token=<None>
 
 # Service username. (string value)
-#admin_user = <None>
+#admin_user=<None>
 
 # Service user password. (string value)
-#admin_password = <None>
+#admin_password=<None>
 
 # Service tenant name. (string value)
-#admin_tenant_name = admin
+#admin_tenant_name=admin
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
-#auth_type = <None>
+#auth_type=<None>
 
 # Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#auth_section=<None>
 
 
 [libvirt]
@@ -5992,7 +5802,7 @@
 #   specified. This is the case when *Amazon*'s AMI/AKI/ARI image
 #   format is used for the rescue image.
 #  (string value)
-#rescue_image_id = <None>
+#rescue_image_id=<None>
 
 #
 # The ID of the kernel (AKI) image to use with the rescue image.
@@ -6011,7 +5821,7 @@
 # * ``rescue_image_id``: If that option points to an image in *Amazon*'s
 #   AMI/AKI/ARI image format, it's useful to use ``rescue_kernel_id`` too.
 #  (string value)
-#rescue_kernel_id = <None>
+#rescue_kernel_id=<None>
 
 #
 # The ID of the RAM disk (ARI) image to use with the rescue image.
@@ -6030,7 +5840,7 @@
 # * ``rescue_image_id``: If that option points to an image in *Amazon*'s
 #   AMI/AKI/ARI image format, it's useful to use ``rescue_ramdisk_id`` too.
 #  (string value)
-#rescue_ramdisk_id = <None>
+#rescue_ramdisk_id=<None>
 
 #
 # Describes the virtualization type (or so called domain type) libvirt should
@@ -6051,7 +5861,8 @@
 # * ``cpu_model``: depends on this
 #  (string value)
 # Allowed values: kvm, lxc, qemu, uml, xen, parallels
-#virt_type = kvm
+#virt_type=kvm
+virt_type=kvm
 
 #
 # Overrides the default libvirt URI of the chosen virtualization type.
@@ -6093,7 +5904,7 @@
 # * ``inject_partition``: That option will decide about the discovery and usage
 #   of the file system. It also can disable the injection at all.
 #  (boolean value)
-#inject_password = false
+#inject_password=false
 
 #
 # Allow the injection of an SSH key at boot time.
@@ -6115,7 +5926,7 @@
 # * ``inject_partition``: That option will decide about the discovery and usage
 #   of the file system. It also can disable the injection at all.
 #  (boolean value)
-#inject_key = false
+#inject_key=false
 
 #
 # Determines the way how the file system is chosen to inject data into it.
@@ -6146,7 +5957,8 @@
 #   single partition image
 #  (integer value)
 # Minimum value: -2
-#inject_partition = -2
+#inject_partition=-2
+inject_partition = -1
 
 # DEPRECATED:
 # Enable a mouse cursor within a graphical VNC or SPICE sessions.
@@ -6164,7 +5976,8 @@
 # This option is deprecated for removal since 14.0.0.
 # Its value may be silently ignored in the future.
 # Reason: This option is being replaced by the 'pointer_model' option.
-#use_usb_tablet = true
+#use_usb_tablet=true
+use_usb_tablet=true
 
 #
 # The IP address or hostname to be used as the target for live migration
@@ -6181,13 +5994,8 @@
 # Possible values:
 #
 # * A valid IP address or hostname, else None.
-#
-# Related options:
-#
-# * ``live_migration_tunnelled``: The live_migration_inbound_addr value is
-#   ignored if tunneling is enabled.
-#  (string value)
-#live_migration_inbound_addr = <None>
+#  (string value)
+#live_migration_inbound_addr=<None>
 
 # DEPRECATED:
 # Live migration target URI to use.
@@ -6197,20 +6005,16 @@
 # hostname.
 #
 # If this option is set to None (which is the default), Nova will automatically
-# generate the `live_migration_uri` value based on only 4 supported `virt_type`
+# generate the `live_migration_uri` value based on only 3 supported `virt_type`
 # in following list:
-#
 # * 'kvm': 'qemu+tcp://%s/system'
 # * 'qemu': 'qemu+tcp://%s/system'
 # * 'xen': 'xenmigr://%s/system'
-# * 'parallels': 'parallels+tcp://%s/system'
-#
-# Related options:
-#
+#
+# Related options:
 # * ``live_migration_inbound_addr``: If ``live_migration_inbound_addr`` value
-#   is not None and ``live_migration_tunnelled`` is False, the ip/hostname
-#   address of target compute node is used instead of ``live_migration_uri`` as
-#   the uri for live migration.
+#   is not None, the ip/hostname address of target compute node is used instead
+#   of ``live_migration_uri`` as the uri for live migration.
 # * ``live_migration_scheme``: If ``live_migration_uri`` is not set, the scheme
 #   used for live migration is taken from ``live_migration_scheme`` instead.
 #  (string value)
@@ -6222,25 +6026,24 @@
 # allow to change live migration scheme and target URI:
 # ``live_migration_scheme``
 # and ``live_migration_inbound_addr`` respectively.
-#live_migration_uri = <None>
-
-#
-# URI scheme used for live migration.
-#
-# Override the default libvirt live migration scheme (which is dependent on
+#live_migration_uri=<None>
+
+#
+# Schema used for live migration.
+#
+# Override the default libvirt live migration scheme (which is dependant on
 # virt_type). If this option is set to None, nova will automatically choose a
 # sensible default based on the hypervisor. It is not recommended that you
 # change
 # this unless you are very sure that hypervisor supports a particular scheme.
 #
 # Related options:
-#
 # * ``virt_type``: This option is meaningful only when ``virt_type`` is set to
 #   `kvm` or `qemu`.
 # * ``live_migration_uri``: If ``live_migration_uri`` value is not None, the
 #   scheme used for live migration is taken from ``live_migration_uri`` instead.
 #  (string value)
-#live_migration_scheme = <None>
+#live_migration_scheme=<None>
 
 #
 # Enable tunnelled migration.
@@ -6251,17 +6054,17 @@
 # the network to allow direct hypervisor to hypervisor communication.
 # If False, use the native transport. If not set, Nova will choose a
 # sensible default based on, for example the availability of native
-# encryption support in the hypervisor. Enabling this option will definitely
+# encryption support in the hypervisor. Enable this option will definitely
 # impact performance massively.
 #
 # Note that this option is NOT compatible with use of block migration.
 #
-# Related options:
-#
-# * ``live_migration_inbound_addr``: The live_migration_inbound_addr value is
-#   ignored if tunneling is enabled.
+# Possible values:
+#
+# * Supersedes and (if set) overrides the deprecated 'live_migration_flag' and
+#   'block_migration_flag' to enable tunneled migration.
 #  (boolean value)
-#live_migration_tunnelled = false
+#live_migration_tunnelled=false
 
 #
 # Maximum bandwidth(in MiB/s) to be used during migration.
@@ -6270,7 +6073,7 @@
 # do not support this feature and will return an error if bandwidth is not 0.
 # Please refer to the libvirt documentation for further details.
 #  (integer value)
-#live_migration_bandwidth = 0
+#live_migration_bandwidth=0
 
 #
 # Maximum permitted downtime, in milliseconds, for live migration
@@ -6285,26 +6088,23 @@
 #
 # * live_migration_completion_timeout
 #  (integer value)
-# Minimum value: 100
-#live_migration_downtime = 500
+#live_migration_downtime=500
 
 #
 # Number of incremental steps to reach max downtime value.
 #
 # Will be rounded up to a minimum of 3 steps.
 #  (integer value)
-# Minimum value: 3
-#live_migration_downtime_steps = 10
+#live_migration_downtime_steps=10
 
 #
 # Time to wait, in seconds, between each step increase of the migration
 # downtime.
 #
-# Minimum delay is 3 seconds. Value is per GiB of guest RAM + disk to be
+# Minimum delay is 10 seconds. Value is per GiB of guest RAM + disk to be
 # transferred, with lower bound of a minimum of 2 GiB per device.
 #  (integer value)
-# Minimum value: 3
-#live_migration_downtime_delay = 75
+#live_migration_downtime_delay=75
 
 #
 # Time to wait, in seconds, for migration to successfully complete transferring
@@ -6321,7 +6121,7 @@
 # * live_migration_downtime_delay
 #  (integer value)
 # Note: This option can be changed without restarting.
-#live_migration_completion_timeout = 800
+#live_migration_completion_timeout=800
 
 # DEPRECATED:
 # Time to wait, in seconds, for migration to make forward progress in
@@ -6337,7 +6137,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Serious bugs found in this feature.
-#live_migration_progress_timeout = 0
+#live_migration_progress_timeout=0
 
 #
 # This option allows nova to switch an on-going live migration to post-copy
@@ -6361,7 +6161,7 @@
 #
 #     * live_migration_permit_auto_converge
 #  (boolean value)
-#live_migration_permit_post_copy = false
+#live_migration_permit_post_copy=false
 
 #
 # This option allows nova to start live migration with auto converge on.
@@ -6369,13 +6169,14 @@
 # Auto converge throttles down CPU if a progress of on-going live migration
 # is slow. Auto converge will only be used if this flag is set to True and
 # post copy is not permitted or post copy is unavailable due to the version
-# of libvirt and QEMU in use.
+# of libvirt and QEMU in use. Auto converge requires libvirt>=1.2.3 and
+# QEMU>=1.6.0.
 #
 # Related options:
 #
 #     * live_migration_permit_post_copy
 #  (boolean value)
-#live_migration_permit_auto_converge = false
+#live_migration_permit_auto_converge=false
 
 #
 # Determine the snapshot image format when sending to the image service.
@@ -6393,7 +6194,7 @@
 # * If not set, defaults to same type as source image.
 #  (string value)
 # Allowed values: raw, qcow2, vmdk, vdi
-#snapshot_image_format = <None>
+#snapshot_image_format=<None>
 
 #
 # Override the default disk prefix for the devices attached to an instance.
@@ -6412,12 +6213,12 @@
 # * ``virt_type``: Influences which device type is used, which determines
 #   the default disk prefix.
 #  (string value)
-#disk_prefix = <None>
+#disk_prefix=<None>
 
 # Number of seconds to wait for instance to shut down after soft reboot request
 # is made. We fall back to hard reboot if instance does not shutdown within this
 # window. (integer value)
-#wait_soft_reboot_seconds = 120
+#wait_soft_reboot_seconds=120
 
 #
 # Is used to set the CPU mode an instance should have.
@@ -6439,7 +6240,8 @@
 #   be launched.
 #  (string value)
 # Allowed values: host-model, host-passthrough, custom, none
-#cpu_mode = <None>
+#cpu_mode=<None>
+cpu_mode=host-passthrough
 
 #
 # Set the name of the libvirt CPU model the instance should use.
@@ -6454,132 +6256,38 @@
 #   This would result in an error and the instance won't be launched.
 # * ``virt_type``: Only the virtualization types ``kvm`` and ``qemu`` use this.
 #  (string value)
-#cpu_model = <None>
-
-#
-# This allows specifying granular CPU feature flags when specifying CPU
-# models.  For example, to explicitly specify the ``pcid``
-# (Process-Context ID, an Intel processor feature) flag to the "IvyBridge"
-# virtual CPU model::
-#
-#     [libvirt]
-#     cpu_mode = custom
-#     cpu_model = IvyBridge
-#     cpu_model_extra_flags = pcid
-#
-# Currently, the choice is restricted to only one option: ``pcid`` (the
-# option is case-insensitive, so ``PCID`` is also valid).  This flag is
-# now required to address the guest performance degradation as a result of
-# applying the "Meltdown" CVE fixes on certain Intel CPU models.
-#
-# Note that when using this config attribute to set the 'PCID' CPU flag,
-# not all virtual (i.e. libvirt / QEMU) CPU models need it:
-#
-# * The only virtual CPU models that include the 'PCID' capability are
-#   Intel "Haswell", "Broadwell", and "Skylake" variants.
-#
-# * The libvirt / QEMU CPU models "Nehalem", "Westmere", "SandyBridge",
-#   and "IvyBridge" will _not_ expose the 'PCID' capability by default,
-#   even if the host CPUs by the same name include it.  I.e.  'PCID' needs
-#   to be explicitly specified when using the said virtual CPU models.
-#
-# For now, the ``cpu_model_extra_flags`` config attribute is valid only in
-# combination with ``cpu_mode`` + ``cpu_model`` options.
-#
-# Besides ``custom``, the libvirt driver has two other CPU modes: The
-# default, ``host-model``, tells it to do the right thing with respect to
-# handling 'PCID' CPU flag for the guest -- *assuming* you are running
-# updated processor microcode, host and guest kernel, libvirt, and QEMU.
-# The other mode, ``host-passthrough``, checks if 'PCID' is available in
-# the hardware, and if so directly passes it through to the Nova guests.
-# Thus, in context of 'PCID', with either of these CPU modes
-# (``host-model`` or ``host-passthrough``), there is no need to use the
-# ``cpu_model_extra_flags``.
-#
-# Related options:
-#
-# * cpu_mode
-# * cpu_model
-#  (list value)
-#cpu_model_extra_flags =
+#cpu_model=<None>
 
 # Location where libvirt driver will store snapshots before uploading them to
 # image service (string value)
-#snapshots_directory = $instances_path/snapshots
+#snapshots_directory=$instances_path/snapshots
 
 # Location where the Xen hvmloader is kept (string value)
-#xen_hvmloader_path = /usr/lib/xen/boot/hvmloader
-
-#
-# Specific cache modes to use for different disk types.
-#
-# For example: file=directsync,block=none,network=writeback
-#
-# For local or direct-attached storage, it is recommended that you use
-# writethrough (default) mode, as it ensures data integrity and has acceptable
-# I/O performance for applications running in the guest, especially for read
-# operations. However, caching mode none is recommended for remote NFS storage,
-# because direct I/O operations (O_DIRECT) perform better than synchronous I/O
-# operations (with O_SYNC). Caching mode none effectively turns all guest I/O
-# operations into direct I/O operations on the host, which is the NFS client in
-# this environment.
-#
-# Possible cache modes:
-#
-# * default: Same as writethrough.
-# * none: With caching mode set to none, the host page cache is disabled, but
-#   the disk write cache is enabled for the guest. In this mode, the write
-#   performance in the guest is optimal because write operations bypass the host
-#   page cache and go directly to the disk write cache. If the disk write cache
-#   is battery-backed, or if the applications or storage stack in the guest
-#   transfer data properly (either through fsync operations or file system
-#   barriers), then data integrity can be ensured. However, because the host
-#   page cache is disabled, the read performance in the guest would not be as
-#   good as in the modes where the host page cache is enabled, such as
-#   writethrough mode.
-# * writethrough: writethrough mode is the default caching mode. With
-#   caching set to writethrough mode, the host page cache is enabled, but the
-#   disk write cache is disabled for the guest. Consequently, this caching mode
-#   ensures data integrity even if the applications and storage stack in the
-#   guest do not transfer data to permanent storage properly (either through
-#   fsync operations or file system barriers). Because the host page cache is
-#   enabled in this mode, the read performance for applications running in the
-#   guest is generally better. However, the write performance might be reduced
-#   because the disk write cache is disabled.
-# * writeback: With caching set to writeback mode, both the host page cache
-#   and the disk write cache are enabled for the guest. Because of this, the
-#   I/O performance for applications running in the guest is good, but the data
-#   is not protected in a power failure. As a result, this caching mode is
-#   recommended only for temporary data where potential data loss is not a
-#   concern.
-# * directsync: Like "writethrough", but it bypasses the host page cache.
-# * unsafe: Caching mode of unsafe ignores cache transfer operations
-#   completely. As its name implies, this caching mode should be used only for
-#   temporary data where data loss is not a concern. This mode can be useful for
-#   speeding up guest installations, but you should switch to another caching
-#   mode in production environments.
-#  (list value)
+#xen_hvmloader_path=/usr/lib/xen/boot/hvmloader
+
+# Specific cachemodes to use for different disk types e.g:
+# file=directsync,block=none (list value)
 #disk_cachemodes =
 
 # A path to a device that will be used as source of entropy on the host.
 # Permitted options are: /dev/random or /dev/hwrng (string value)
-#rng_dev_path = <None>
+#rng_dev_path=<None>
 
 # For qemu or KVM guests, set this option to specify a default machine type per
 # host architecture. You can find a list of supported machine types in your
 # environment by checking the output of the "virsh capabilities"command. The
 # format of the value for this config option is host-arch=machine-type. For
 # example: x86_64=machinetype1,armv7l=machinetype2 (list value)
-#hw_machine_type = <None>
+#hw_machine_type=<None>
 
 # The data source used to the populate the host "serial" UUID exposed to guest
 # in the virtual BIOS. (string value)
 # Allowed values: none, os, hardware, auto
-#sysinfo_serial = auto
+#sysinfo_serial=auto
 
 # A number of seconds to memory usage statistics period. Zero or negative value
 # mean to disable memory usage statistics. (integer value)
-#mem_stats_period_seconds = 10
+#mem_stats_period_seconds=10
 
 # List of uid targets and ranges.Syntax is guest-uid:host-uid:countMaximum of 5
 # allowed. (list value)
@@ -6591,7 +6299,7 @@
 
 # In a realtime host context vCPUs for guest will run in that scheduling
 # priority. Priority depends on the host kernel (usually 1-99) (integer value)
-#realtime_scheduler_priority = 1
+#realtime_scheduler_priority=1
 
 #
 # This is a performance event list which could be used as monitor. These events
@@ -6620,7 +6328,7 @@
 # * images_volume_group
 #  (string value)
 # Allowed values: raw, flat, qcow2, lvm, rbd, ploop, default
-#images_type = default
+#images_type=default
 
 #
 # LVM Volume Group that is used for VM images, when you specify images_type=lvm
@@ -6629,15 +6337,15 @@
 #
 # * images_type
 #  (string value)
-#images_volume_group = <None>
+#images_volume_group=<None>
 
 #
 # Create sparse logical volumes (with virtualsize) if this flag is set to True.
 #  (boolean value)
-#sparse_logical_volumes = false
+#sparse_logical_volumes=false
 
 # The RADOS pool in which rbd volumes are stored (string value)
-#images_rbd_pool = rbd
+#images_rbd_pool=rbd
 
 # Path to the ceph configuration file to use (string value)
 #images_rbd_ceph_conf =
@@ -6652,32 +6360,32 @@
 # * Qemu >= 1.6 (qcow2 format)
 #  (string value)
 # Allowed values: ignore, unmap
-#hw_disk_discard = <None>
+#hw_disk_discard=<None>
 
 # DEPRECATED: Allows image information files to be stored in non-standard
 # locations (string value)
 # This option is deprecated for removal since 14.0.0.
 # Its value may be silently ignored in the future.
 # Reason: Image info files are no longer used by the image cache
-#image_info_filename_pattern = $instances_path/$image_cache_subdirectory_name/%(image)s.info
+#image_info_filename_pattern=$instances_path/$image_cache_subdirectory_name/%(image)s.info
 
 # Unused resized base images younger than this will not be removed (integer
 # value)
-#remove_unused_resized_minimum_age_seconds = 3600
+#remove_unused_resized_minimum_age_seconds=3600
 
 # DEPRECATED: Write a checksum for files in _base to disk (boolean value)
 # This option is deprecated for removal since 14.0.0.
 # Its value may be silently ignored in the future.
 # Reason: The image cache no longer periodically calculates checksums of stored
 # images. Data integrity can be checked at the block or filesystem level.
-#checksum_base_images = false
+#checksum_base_images=false
 
 # DEPRECATED: How frequently to checksum base images (integer value)
 # This option is deprecated for removal since 14.0.0.
 # Its value may be silently ignored in the future.
 # Reason: The image cache no longer periodically calculates checksums of stored
 # images. Data integrity can be checked at the block or filesystem level.
-#checksum_interval_seconds = 3600
+#checksum_interval_seconds=3600
 
 #
 # Method used to wipe ephemeral disks when they are deleted. Only takes effect
@@ -6695,7 +6403,7 @@
 # * volume_clear_size
 #  (string value)
 # Allowed values: none, zero, shred
-#volume_clear = zero
+#volume_clear=zero
 
 #
 # Size of area in MiB, counting from the beginning of the allocated volume,
@@ -6713,7 +6421,7 @@
 #   for this option to have any impact
 #  (integer value)
 # Minimum value: 0
-#volume_clear_size = 0
+#volume_clear_size=0
 
 #
 # Enable snapshot compression for ``qcow2`` images.
@@ -6726,10 +6434,25 @@
 #
 # * snapshot_image_format
 #  (boolean value)
-#snapshot_compression = false
+#snapshot_compression=false
 
 # Use virtio for bridge interfaces with KVM/QEMU (boolean value)
-#use_virtio_for_bridges = true
+#use_virtio_for_bridges=true
+use_virtio_for_bridges=true
+
+#
+# Protocols listed here will be accessed directly from QEMU.
+#
+# If gluster is present in qemu_allowed_storage_drivers, glusterfs's backend
+# will
+# pass a disk configuration to QEMU. This allows QEMU to access the volume using
+# libgfapi rather than mounting GlusterFS via fuse.
+#
+# Possible values:
+#
+# * [gluster]
+#  (list value)
+#qemu_allowed_storage_drivers =
 
 #
 # Use multipath connection of the iSCSI or FC volume
@@ -6738,13 +6461,7 @@
 # provide high availability and fault tolerance.
 #  (boolean value)
 # Deprecated group/name - [libvirt]/iscsi_use_multipath
-#volume_use_multipath = false
-
-#
-# Number of times to scan given storage protocol to find volume.
-#  (integer value)
-# Deprecated group/name - [libvirt]/num_iscsi_scan_tries
-#num_volume_scan_tries = 5
+#volume_use_multipath=false
 
 #
 # Number of times to rediscover AoE target to find volume.
@@ -6753,7 +6470,18 @@
 # Ethernet). This option allows the user to specify the maximum number of retry
 # attempts that can be made to discover the AoE device.
 #  (integer value)
-#num_aoe_discover_tries = 3
+#num_aoe_discover_tries=3
+
+#
+# Absolute path to the directory where the glusterfs volume is mounted on the
+# compute node.
+#  (string value)
+#glusterfs_mount_point_base=$state_path/mnt
+
+#
+# Number of times to scan iSCSI target to find volume.
+#  (integer value)
+#num_iscsi_scan_tries=5
 
 #
 # The iSCSI transport iface to use to connect to target in case offload support
@@ -6766,7 +6494,7 @@
 # provided here with the actual transport name.
 #  (string value)
 # Deprecated group/name - [libvirt]/iscsi_transport
-#iscsi_iface = <None>
+#iscsi_iface=<None>
 
 #
 # Number of times to scan iSER target to find volume.
@@ -6776,7 +6504,7 @@
 # maximum
 # number of scan attempts that can be made to find iSER volume.
 #  (integer value)
-#num_iser_scan_tries = 5
+#num_iser_scan_tries=5
 
 #
 # Use multipath connection of the iSER volume.
@@ -6784,7 +6512,7 @@
 # iSER volumes can be connected as multipath devices. This will provide high
 # availability and fault tolerance.
 #  (boolean value)
-#iser_use_multipath = false
+#iser_use_multipath=false
 
 #
 # The RADOS client name for accessing rbd(RADOS Block Devices) volumes.
@@ -6792,12 +6520,12 @@
 # Libvirt will refer to this user when connecting and authenticating with
 # the Ceph RBD server.
 #  (string value)
-#rbd_user = <None>
+#rbd_user=<None>
 
 #
 # The libvirt UUID of the secret for the rbd_user volumes.
 #  (string value)
-#rbd_secret_uuid = <None>
+#rbd_secret_uuid=<None>
 
 #
 # Directory where the NFS volume is mounted on the compute node.
@@ -6810,7 +6538,7 @@
 #
 # * A string representing absolute path of mount point.
 #  (string value)
-#nfs_mount_point_base = $state_path/mnt
+#nfs_mount_point_base=$state_path/mnt
 
 #
 # Mount options passed to the NFS client. See section of the nfs man page
@@ -6824,7 +6552,7 @@
 # * Any string representing mount options separated by commas.
 # * Example string: vers=3,lookupcache=pos
 #  (string value)
-#nfs_mount_options = <None>
+#nfs_mount_options=<None>
 
 #
 # Directory where the Quobyte volume is mounted on the compute node.
@@ -6837,15 +6565,38 @@
 #
 # * A string representing absolute path of mount point.
 #  (string value)
-#quobyte_mount_point_base = $state_path/mnt
+#quobyte_mount_point_base=$state_path/mnt
 
 # Path to a Quobyte Client configuration file. (string value)
-#quobyte_client_cfg = <None>
+#quobyte_client_cfg=<None>
+
+#
+# Path or URL to Scality SOFS(Scale-Out File Server) configuration file.
+#
+# The Scality SOFS provides OpenStack users the option of storing their
+# data on a high capacity, replicated, highly available Scality Ring object
+# storage cluster.
+#  (string value)
+#scality_sofs_config=<None>
+
+#
+# Base dir where Scality SOFS shall be mounted.
+#
+# The Scality volume driver in Nova mounts SOFS and lets the hypervisor access
+# the volumes.
+#
+# Possible values:
+#
+# * $state_path/scality where state_path is a config option that specifies
+#   the top-level directory for maintaining nova's state or Any string
+#   containing the full directory path.
+#  (string value)
+#scality_sofs_mount_point=$state_path/scality
 
 #
 # Directory where the SMBFS shares are mounted on the compute node.
 #  (string value)
-#smbfs_mount_point_base = $state_path/mnt
+#smbfs_mount_point_base=$state_path/mnt
 
 #
 # Mount options passed to the SMBFS client.
@@ -6868,7 +6619,7 @@
 # * copying file to remote host
 #  (string value)
 # Allowed values: ssh, rsync
-#remote_filesystem_transport = ssh
+#remote_filesystem_transport=ssh
 
 #
 # Directory where the Virtuozzo Storage clusters are mounted on the compute
@@ -6880,7 +6631,7 @@
 #
 # * vzstorage_mount_* group of parameters
 #  (string value)
-#vzstorage_mount_point_base = $state_path/mnt
+#vzstorage_mount_point_base=$state_path/mnt
 
 #
 # Mount owner user name.
@@ -6891,7 +6642,7 @@
 #
 # * vzstorage_mount_* group of parameters
 #  (string value)
-#vzstorage_mount_user = stack
+#vzstorage_mount_user=stack
 
 #
 # Mount owner group name.
@@ -6902,7 +6653,7 @@
 #
 # * vzstorage_mount_* group of parameters
 #  (string value)
-#vzstorage_mount_group = qemu
+#vzstorage_mount_group=qemu
 
 #
 # Mount access mode.
@@ -6916,7 +6667,7 @@
 #
 # * vzstorage_mount_* group of parameters
 #  (string value)
-#vzstorage_mount_perms = 0770
+#vzstorage_mount_perms=0770
 
 #
 # Path to vzstorage client log.
@@ -6929,7 +6680,7 @@
 #
 # * vzstorage_mount_opts may include more detailed logging options.
 #  (string value)
-#vzstorage_log_path = /var/log/vstorage/%(cluster_name)s/nova.log.gz
+#vzstorage_log_path=/var/log/pstorage/%(cluster_name)s/nova.log.gz
 
 #
 # Path to the SSD cache file.
@@ -6952,7 +6703,7 @@
 #
 # * vzstorage_mount_opts may include more detailed cache options.
 #  (string value)
-#vzstorage_cache_path = <None>
+#vzstorage_cache_path=<None>
 
 #
 # Extra mount options for pstorage-mount
@@ -6981,7 +6732,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
+#host=127.0.0.1
 
 # DEPRECATED: Use this port to connect to redis host. (port value)
 # Minimum value: 0
@@ -6989,7 +6740,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
+#port=6379
 
 # DEPRECATED: Password for Redis server (optional). (string value)
 # This option is deprecated for removal.
@@ -7005,16 +6756,16 @@
 #sentinel_hosts =
 
 # Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
+#sentinel_group_name=oslo-messaging-zeromq
 
 # Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
+#wait_timeout=2000
 
 # Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
+#check_timeout=20000
 
 # Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
+#socket_timeout=10000
 
 
 [metrics]
@@ -7056,7 +6807,7 @@
 #
 # * weight_of_unavailable
 #  (floating point value)
-#weight_multiplier = 1.0
+#weight_multiplier=1.0
 
 #
 # This setting specifies the metrics to be weighed and the relative ratios for
@@ -7111,7 +6862,7 @@
 #
 # * weight_of_unavailable
 #  (boolean value)
-#required = true
+#required=true
 
 #
 # When any of the following conditions are met, this value will be used in place
@@ -7136,7 +6887,7 @@
 # * required
 # * weight_multiplier
 #  (floating point value)
-#weight_of_unavailable = -10000.0
+#weight_of_unavailable=-10000.0
 
 
 [mks]
@@ -7163,15 +6914,14 @@
 #
 # Possible values:
 #
-# * Must be a valid URL of the form:``http://host:port/`` or
-#   ``https://host:port/``
-#  (uri value)
-#mksproxy_base_url = http://127.0.0.1:6090/
+# * Must be a valid URL of the form:``http://host:port/``
+#  (string value)
+#mksproxy_base_url=http://127.0.0.1:6090/
 
 #
 # Enables graphical console access for virtual machines.
 #  (boolean value)
-#enabled = false
+#enabled=false
 
 
 [neutron]
@@ -7181,7 +6931,18 @@
 #
 # From nova.conf
 #
-
+auth_type=v3password
+project_domain_name = Default
+user_domain_name = Default
+auth_url = http://172.16.10.36:35357/v3
+
+password=opnfv_secret
+project_name=service
+username=neutron
+region_name= RegionOne
+url=http://172.16.10.36:9696
+metadata_proxy_shared_secret=opnfv_secret
+service_metadata_proxy=True
 #
 # This option specifies the URL for connecting to Neutron.
 #
@@ -7191,7 +6952,7 @@
 #   This typically matches the URL returned for the 'network' service type
 #   from the Keystone service catalog.
 #  (uri value)
-#url = http://127.0.0.1:9696
+#url=http://127.0.0.1:9696
 
 #
 # Region name for connecting to Neutron in admin context.
@@ -7203,25 +6964,17 @@
 # to Keystone, the Keystone service uses the region_name to determine the
 # region the request is coming from.
 #  (string value)
-#region_name = RegionOne
-
-#
-# Default name for the Open vSwitch integration bridge.
+#region_name=RegionOne
+
 #
 # Specifies the name of an integration bridge interface used by OpenvSwitch.
-# This option is only used if Neutron does not specify the OVS bridge name in
-# port binding responses.
-#  (string value)
-#ovs_bridge = br-int
-
-#
-# Default name for the floating IP pool.
-#
-# Specifies the name of floating IP pool used for allocating floating IPs. This
-# option is only used if Neutron does not specify the floating IP pool name in
-# port binding reponses.
-#  (string value)
-#default_floating_pool = nova
+# This option is used only if Neutron does not specify the OVS bridge name.
+#
+# Possible values:
+#
+# * Any string representing OVS bridge name.
+#  (string value)
+#ovs_bridge=br-int
 
 #
 # Integer value representing the number of seconds to wait before querying
@@ -7231,7 +6984,7 @@
 # extensions with no wait.
 #  (integer value)
 # Minimum value: 0
-#extension_sync_interval = 600
+#extension_sync_interval=600
 
 #
 # When set to True, this option indicates that Neutron will be used to proxy
@@ -7242,7 +6995,7 @@
 #
 # * metadata_proxy_shared_secret
 #  (boolean value)
-#service_metadata_proxy = false
+#service_metadata_proxy=false
 
 #
 # This option holds the shared secret string used to validate proxy requests to
@@ -7257,82 +7010,82 @@
 
 # PEM encoded Certificate Authority to use when verifying HTTPs connections.
 # (string value)
-#cafile = <None>
+#cafile=<None>
 
 # PEM encoded client certificate cert file (string value)
-#certfile = <None>
+#certfile=<None>
 
 # PEM encoded client certificate key file (string value)
-#keyfile = <None>
+#keyfile=<None>
 
 # Verify HTTPS connections. (boolean value)
-#insecure = false
+#insecure=false
 
 # Timeout value for http requests (integer value)
-#timeout = <None>
+#timeout=<None>
 
 # Authentication type to load (string value)
 # Deprecated group/name - [neutron]/auth_plugin
-#auth_type = <None>
+#auth_type=<None>
 
 # Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#auth_section=<None>
 
 # Authentication URL (string value)
-#auth_url = <None>
+#auth_url=<None>
 
 # Domain ID to scope to (string value)
-#domain_id = <None>
+#domain_id=<None>
 
 # Domain name to scope to (string value)
-#domain_name = <None>
+#domain_name=<None>
 
 # Project ID to scope to (string value)
-#project_id = <None>
+#project_id=<None>
 
 # Project name to scope to (string value)
-#project_name = <None>
+#project_name=<None>
 
 # Domain ID containing project (string value)
-#project_domain_id = <None>
+#project_domain_id=<None>
 
 # Domain name containing project (string value)
-#project_domain_name = <None>
+#project_domain_name=<None>
 
 # Trust ID (string value)
-#trust_id = <None>
+#trust_id=<None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
 # value)
-#default_domain_id = <None>
+#default_domain_id=<None>
 
 # Optional domain name to use with v3 API and v2 parameters. It will be used for
 # both the user and project domain in v3 and ignored in v2 authentication.
 # (string value)
-#default_domain_name = <None>
+#default_domain_name=<None>
 
 # User ID (string value)
-#user_id = <None>
+#user_id=<None>
 
 # Username (string value)
-# Deprecated group/name - [neutron]/user_name
-#username = <None>
+# Deprecated group/name - [neutron]/user-name
+#username=<None>
 
 # User's domain id (string value)
-#user_domain_id = <None>
+#user_domain_id=<None>
 
 # User's domain name (string value)
-#user_domain_name = <None>
+#user_domain_name=<None>
 
 # User's password (string value)
-#password = <None>
+#password=<None>
 
 # Tenant ID (string value)
-#tenant_id = <None>
+#tenant_id=<None>
 
 # Tenant Name (string value)
-#tenant_name = <None>
+#tenant_name=<None>
 
 
 [notifications]
@@ -7347,37 +7100,34 @@
 #
 
 #
-# If set, send compute.instance.update notifications on
-# instance state changes.
-#
-# Please refer to
-# https://docs.openstack.org/nova/latest/reference/notifications.html for
+# If set, send compute.instance.update notifications on instance state
+# changes.
+#
+# Please refer to https://wiki.openstack.org/wiki/SystemUsageData for
 # additional information on notifications.
 #
 # Possible values:
 #
 # * None - no notifications
-# * "vm_state" - notifications are sent with VM state transition information in
-#   the ``old_state`` and ``state`` fields. The ``old_task_state`` and
-#   ``new_task_state`` fields will be set to the current task_state of the
-#   instance.
-# * "vm_and_task_state" - notifications are sent with VM and task state
-#   transition information.
+# * "vm_state" - notifications on VM state changes
+# * "vm_and_task_state" - notifications on VM and task state changes
 #  (string value)
 # Allowed values: <None>, vm_state, vm_and_task_state
-#notify_on_state_change = <None>
+# Deprecated group/name - [DEFAULT]/notify_on_state_change
+#notify_on_state_change=<None>
 
 #
 # If enabled, send api.fault notifications on caught exceptions in the
 # API service.
 #  (boolean value)
 # Deprecated group/name - [DEFAULT]/notify_api_faults
-#notify_on_api_faults = false
+#notify_on_api_faults=false
+notify_on_api_faults=false
 
 # Default notification level for outgoing notifications. (string value)
 # Allowed values: DEBUG, INFO, WARN, ERROR, CRITICAL
 # Deprecated group/name - [DEFAULT]/default_notification_level
-#default_level = INFO
+#default_level=INFO
 
 #
 # Default publisher_id for outgoing notifications. If you consider routing
@@ -7392,7 +7142,8 @@
 #
 # *  my_ip - IP address of this host
 #  (string value)
-#default_publisher_id = $my_ip
+# Deprecated group/name - [DEFAULT]/default_publisher_id
+#default_publisher_id=$my_ip
 
 #
 # Specifies which notification format shall be used by nova.
@@ -7412,36 +7163,59 @@
 # http://docs.openstack.org/developer/nova/notifications.html
 #  (string value)
 # Allowed values: unversioned, versioned, both
-#notification_format = both
-
-#
-# Specifies the topics for the versioned notifications issued by nova.
-#
-# The default value is fine for most deployments and rarely needs to be changed.
-# However, if you have a third-party service that consumes versioned
-# notifications, it might be worth getting a topic for that service.
-# Nova will send a message containing a versioned notification payload to each
-# topic queue in this list.
-#
-# The list of versioned notifications is visible in
-# http://docs.openstack.org/developer/nova/notifications.html
+# Deprecated group/name - [DEFAULT]/notification_format
+#notification_format=both
+
+
+[osapi_v21]
+
+#
+# From nova.conf
+#
+
+# DEPRECATED:
+# This option is a list of all of the v2.1 API extensions to never load.
+#
+# Possible values:
+#
+# * A list of strings, each being the alias of an extension that you do not
+#   wish to load.
+#
+# Related options:
+#
+# * enabled
+# * extensions_whitelist
 #  (list value)
-#versioned_notifications_topics = versioned_notifications
-
-#
-# If enabled, include block device information in the versioned notification
-# payload. Sending block device information is disabled by default as providing
-# that information can incur some overhead on the system since the information
-# may need to be loaded from the database.
-#  (boolean value)
-#bdms_in_notifications = false
-
-
-[osapi_v21]
-
-#
-# From nova.conf
-#
+# This option is deprecated for removal since 12.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# API extensions are now part of the standard API. API extensions should be
+# disabled using policy, rather than via these configuration options.
+#extensions_blacklist =
+
+# DEPRECATED:
+# This is a list of extensions. If it is empty, then *all* extensions except
+# those specified in the extensions_blacklist option will be loaded. If it is
+# not
+# empty, then only those extensions in this list will be loaded, provided that
+# they are also not in the extensions_blacklist option.
+#
+# Possible values:
+#
+# * A list of strings, each being the alias of an extension that you wish to
+#   load, or an empty list, which indicates that all extensions are to be run.
+#
+# Related options:
+#
+# * enabled
+# * extensions_blacklist
+#  (list value)
+# This option is deprecated for removal since 12.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# API extensions are now part of the standard API. API extensions should be
+# disabled using policy, rather than via these configuration options.
+#extensions_whitelist =
 
 # DEPRECATED:
 # This option is a string representing a regular expression (regex) that matches
@@ -7459,7 +7233,7 @@
 # dashes. If your installation uses IDs outside of this range, you should use
 # this option to provide your own regex and give you time to migrate offending
 # projects to valid IDs before the next release.
-#project_id_regex = <None>
+#project_id_regex=<None>
 
 
 [oslo_concurrency]
@@ -7469,14 +7243,16 @@
 #
 
 # Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
+# Deprecated group/name - [DEFAULT]/disable_process_locking
+#disable_process_locking=false
 
 # Directory to use for lock files.  For security, the specified directory should
 # only be writable by the user running the processes that need locking. Defaults
 # to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set in the
 # environment, use the Python tempfile.gettempdir function to find a suitable
 # location. If external locks are used, a lock path must be set. (string value)
-#lock_path = /tmp
+# Deprecated group/name - [DEFAULT]/lock_path
+lock_path=/var/lib/nova/tmp
 
 
 [oslo_messaging_amqp]
@@ -7487,104 +7263,103 @@
 
 # Name for the AMQP container. must be globally unique. Defaults to a generated
 # UUID (string value)
-#container_name = <None>
+# Deprecated group/name - [amqp1]/container_name
+#container_name=<None>
 
 # Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout=0
 
 # Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
+# Deprecated group/name - [amqp1]/trace
+#trace=false
 
 # CA certificate PEM file used to verify the server's certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
 #ssl_ca_file =
 
 # Self-identifying certificate PEM file for client authentication (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
 #ssl_cert_file =
 
 # Private key PEM file used to sign ssl_cert_file certificate (optional) (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_key_file
 #ssl_key_file =
 
 # Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password=<None>
 
 # DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
+#allow_insecure_clients=false
 
 # Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
 #sasl_mechanisms =
 
 # Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
 #sasl_config_dir =
 
 # Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
 #sasl_config_name =
 
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
 #username =
 
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
 #password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
 # Minimum value: 1
-#connection_retry_interval = 1
+#connection_retry_interval=1
 
 # Increase the connection_retry_interval by this many seconds after each
 # unsuccessful failover attempt. (integer value)
 # Minimum value: 0
-#connection_retry_backoff = 2
+#connection_retry_backoff=2
 
 # Maximum limit for connection_retry_interval + connection_retry_backoff
 # (integer value)
 # Minimum value: 1
-#connection_retry_interval_max = 30
+#connection_retry_interval_max=30
 
 # Time to pause between re-connecting an AMQP 1.0 link that failed due to a
 # recoverable error. (integer value)
 # Minimum value: 1
-#link_retry_delay = 10
+#link_retry_delay=10
 
 # The maximum number of attempts to re-send a reply message which failed due to
 # a recoverable error. (integer value)
 # Minimum value: -1
-#default_reply_retry = 0
+#default_reply_retry=0
 
 # The deadline for an rpc reply message delivery. (integer value)
 # Minimum value: 5
-#default_reply_timeout = 30
+#default_reply_timeout=30
 
 # The deadline for an rpc cast or call message delivery. Only used when caller
 # does not provide a timeout expiry. (integer value)
 # Minimum value: 5
-#default_send_timeout = 30
+#default_send_timeout=30
 
 # The deadline for a sent notification message delivery. Only used when caller
 # does not provide a timeout expiry. (integer value)
 # Minimum value: 5
-#default_notify_timeout = 30
+#default_notify_timeout=30
 
 # The duration to schedule a purge of idle sender links. Detach link after
 # expiry. (integer value)
 # Minimum value: 1
-#default_sender_link_timeout = 600
+#default_sender_link_timeout=600
 
 # Indicates the addressing mode used by the driver.
 # Permitted values:
@@ -7592,36 +7367,39 @@
 # 'routable' - use routable addresses
 # 'dynamic'  - use legacy addresses if the message bus does not support routing
 # otherwise use routable addressing (string value)
-#addressing_mode = dynamic
+#addressing_mode=dynamic
 
 # address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix=exclusive
 
 # address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix=broadcast
 
 # address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix=unicast
 
 # Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
+#rpc_address_prefix=openstack.org/om/rpc
 
 # Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
+#notify_address_prefix=openstack.org/om/notify
 
 # Appended to the address prefix when sending a fanout message. Used by the
 # message bus to identify fanout messages. (string value)
-#multicast_address = multicast
+#multicast_address=multicast
 
 # Appended to the address prefix when sending to a particular RPC/Notification
 # server. Used by the message bus to identify messages sent to a single
 # destination. (string value)
-#unicast_address = unicast
+#unicast_address=unicast
 
 # Appended to the address prefix when sending to a group of consumers. Used by
 # the message bus to identify messages that should be delivered in a round-robin
 # fashion across consumers. (string value)
-#anycast_address = anycast
+#anycast_address=anycast
 
 # Exchange name used in notification addresses.
 # Exchange name resolution precedence:
@@ -7629,7 +7407,7 @@
 # else default_notification_exchange if set
 # else control_exchange if set
 # else 'notify' (string value)
-#default_notification_exchange = <None>
+#default_notification_exchange=<None>
 
 # Exchange name used in RPC addresses.
 # Exchange name resolution precedence:
@@ -7637,19 +7415,19 @@
 # else default_rpc_exchange if set
 # else control_exchange if set
 # else 'rpc' (string value)
-#default_rpc_exchange = <None>
+#default_rpc_exchange=<None>
 
 # Window size for incoming RPC Reply messages. (integer value)
 # Minimum value: 1
-#reply_link_credit = 200
+#reply_link_credit=200
 
 # Window size for incoming RPC Request messages (integer value)
 # Minimum value: 1
-#rpc_server_credit = 100
+#rpc_server_credit=100
 
 # Window size for incoming Notification messages (integer value)
 # Minimum value: 1
-#notify_server_credit = 100
+#notify_server_credit=100
 
 # Send messages of this type pre-settled.
 # Pre-settled messages will not receive acknowledgement
@@ -7661,8 +7439,8 @@
 # 'rpc-cast' - Send RPC Casts pre-settled
 # 'notify'   - Send Notifications pre-settled
 #  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
+#pre_settled=rpc-cast
+#pre_settled=rpc-reply
 
 
 [oslo_messaging_kafka]
@@ -7675,7 +7453,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
+#kafka_default_host=localhost
 
 # DEPRECATED: Default Kafka broker Port (port value)
 # Minimum value: 0
@@ -7683,33 +7461,33 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
+#kafka_default_port=9092
 
 # Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
+#kafka_max_fetch_bytes=1048576
+
+# Default timeout(s) for Kafka consumers (integer value)
+#kafka_consumer_timeout=1.0
 
 # Pool Size for Kafka Consumers (integer value)
-#pool_size = 10
+#pool_size=10
 
 # The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
+#conn_pool_min_size=2
 
 # The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
+#conn_pool_ttl=1200
 
 # Group id for Kafka consumer. Consumers in one group will coordinate message
 # consumption (string value)
-#consumer_group = oslo_messaging_consumer
+#consumer_group=oslo_messaging_consumer
 
 # Upper bound on the delay for KafkaProducer batching in seconds (floating point
 # value)
-#producer_batch_timeout = 0.0
+#producer_batch_timeout=0.0
 
 # Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
+#producer_batch_size=16384
 
 
 [oslo_messaging_notifications]
@@ -7722,21 +7500,17 @@
 # messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
+driver = messagingv2
 
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
 # Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
+#transport_url=<None>
 
 # AMQP topic used for OpenStack notifications. (list value)
 # Deprecated group/name - [rpc_notifier2]/topics
 # Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
+#topics=notifications
 
 
 [oslo_messaging_rabbit]
@@ -7744,114 +7518,128 @@
 #
 # From oslo.messaging
 #
-
+rabbit_retry_interval = 1
+rabbit_retry_backoff = 2
+rpc_conn_pool_size = 300
 # Use durable queues in AMQP. (boolean value)
 # Deprecated group/name - [DEFAULT]/amqp_durable_queues
 # Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
+#amqp_durable_queues=false
 
 # Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete=false
 
 # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
 # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
 # distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
 
 # SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
 
 # SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
 
 # SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
-#kombu_reconnect_delay = 1.0
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay=1.0
 
 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
 # be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
+#kombu_compression=<None>
 
 # How long to wait a missing client before abandoning to send it its replies.
 # This value should not be longer than rpc_response_timeout. (integer value)
 # Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
+#kombu_missing_consumer_retry_timeout=60
 
 # Determines how the next RabbitMQ node is chosen in case the one we are
 # currently connected to becomes unavailable. Takes effect only if more than one
 # RabbitMQ node is provided in config. (string value)
 # Allowed values: round-robin, shuffle
-#kombu_failover_strategy = round-robin
+#kombu_failover_strategy=round-robin
 
 # DEPRECATED: The RabbitMQ broker address where a single node is used. (string
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
+#rabbit_host=localhost
 
 # DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
+#rabbit_port=5672
 
 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
+#rabbit_hosts=$rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl=false
 
 # DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
+#rabbit_userid=guest
 
 # DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
+#rabbit_password=guest
 
 # The RabbitMQ login method. (string value)
 # Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
-#rabbit_login_method = AMQPLAIN
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method=AMQPLAIN
 
 # DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
+#rabbit_virtual_host=/
 
 # How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
+#rabbit_retry_interval=1
 
 # How long to backoff for between retries when connecting to RabbitMQ. (integer
 # value)
-#rabbit_retry_backoff = 2
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff=2
 
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
 # (integer value)
-#rabbit_interval_max = 30
+#rabbit_interval_max=30
 
 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
 # (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
+#rabbit_max_retries=0
 
 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
 # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
@@ -7859,131 +7647,137 @@
 # you just want to make sure that all queues (except those with auto-generated
 # names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
 # '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues=false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
 # Queues which are unused for the duration of the TTL are automatically deleted.
 # The parameter affects only reply and fanout queues. (integer value)
 # Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
+#rabbit_transient_queues_ttl=1800
 
 # Specifies the number of messages to prefetch. Setting to zero allows unlimited
 # messages. (integer value)
-#rabbit_qos_prefetch_count = 0
+#rabbit_qos_prefetch_count=0
 
 # Number of seconds after which the Rabbit broker is considered down if
 # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
 # value)
-#heartbeat_timeout_threshold = 60
+#heartbeat_timeout_threshold=60
 
 # How often times during the heartbeat_timeout_threshold we check the heartbeat.
 # (integer value)
-#heartbeat_rate = 2
+#heartbeat_rate=2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit=false
 
 # Maximum number of channels to allow (integer value)
-#channel_max = <None>
+#channel_max=<None>
 
 # The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
+#frame_max=<None>
 
 # How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
+#heartbeat_interval=3
+
+# Enable SSL (boolean value)
+#ssl=<None>
 
 # Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
+#ssl_options=<None>
 
 # Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
+#socket_timeout=0.25
 
 # Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point value)
-#tcp_user_timeout = 0.25
+#tcp_user_timeout=0.25
 
 # Set delay for reconnection to some host which has connection error (floating
 # point value)
-#host_connection_reconnect_delay = 0.25
+#host_connection_reconnect_delay=0.25
 
 # Connection factory implementation (string value)
 # Allowed values: new, single, read_write
-#connection_factory = single
+#connection_factory=single
 
 # Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
+#pool_max_size=30
 
 # Maximum number of connections to create above `pool_max_size`. (integer value)
-#pool_max_overflow = 0
+#pool_max_overflow=0
 
 # Default number of seconds to wait for a connections to available (integer
 # value)
-#pool_timeout = 30
+#pool_timeout=30
 
 # Lifetime of a connection (since creation) in seconds or None for no recycling.
 # Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
+#pool_recycle=600
 
 # Threshold at which inactive (since release) connections are considered stale
 # in seconds or None for no staleness. Stale connections are closed on acquire.
 # (integer value)
-#pool_stale = 60
+#pool_stale=60
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
-#default_serializer_type = json
+#default_serializer_type=json
 
 # Persist notification messages. (boolean value)
-#notification_persistence = false
+#notification_persistence=false
 
 # Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
+#default_notification_exchange=${control_exchange}_notification
 
 # Max number of not acknowledged message which RabbitMQ can send to notification
 # listener. (integer value)
-#notification_listener_prefetch_count = 100
+#notification_listener_prefetch_count=100
 
 # Reconnecting retry count in case of connectivity problem during sending
 # notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
+#default_notification_retry_attempts=-1
 
 # Reconnecting retry delay in case of connectivity problem during sending
 # notification message (floating point value)
-#notification_retry_delay = 0.25
+#notification_retry_delay=0.25
 
 # Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
+#rpc_queue_expiration=60
 
 # Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
+#default_rpc_exchange=${control_exchange}_rpc
 
 # Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
+#rpc_reply_exchange=${control_exchange}_rpc_reply
 
 # Max number of not acknowledged message which RabbitMQ can send to rpc
 # listener. (integer value)
-#rpc_listener_prefetch_count = 100
+#rpc_listener_prefetch_count=100
 
 # Max number of not acknowledged message which RabbitMQ can send to rpc reply
 # listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
+#rpc_reply_listener_prefetch_count=100
 
 # Reconnecting retry count in case of connectivity problem during sending reply.
 # -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
+#rpc_reply_retry_attempts=-1
 
 # Reconnecting retry delay in case of connectivity problem during sending reply.
 # (floating point value)
-#rpc_reply_retry_delay = 0.25
+#rpc_reply_retry_delay=0.25
 
 # Reconnecting retry count in case of connectivity problem during sending RPC
 # message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
 # request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
+#default_rpc_retry_attempts=-1
 
 # Reconnecting retry delay in case of connectivity problem during sending RPC
 # message (floating point value)
-#rpc_retry_delay = 0.25
+#rpc_retry_delay=0.25
+
 
 
 [oslo_messaging_zmq]
@@ -7994,25 +7788,31 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address=*
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker=redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts=1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog=<None>
 
 # Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir=/var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host=localhost
 
 # Number of seconds to wait before all pending messages will be sent after
 # closing a socket. The default value of -1 specifies an infinite linger period.
@@ -8020,110 +7820,120 @@
 # immediately when the socket is closed. Positive values specify an upper bound
 # for the linger period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
+#zmq_linger=-1
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout=1
 
 # Expiration timeout in seconds of a name service record about existing target (
 # < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire=300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
-#zmq_target_update = 180
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update=180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
-#use_pub_sub = false
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub=false
 
 # Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy=false
 
 # This option makes direct connections dynamic or static. It makes sense only
 # with use_router_proxy=False which means to use direct connections for direct
 # message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
+#use_dynamic_connections=false
 
 # How many additional connections to a host will be made for failover reasons.
 # This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
+#zmq_failover_connections=2
 
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#rpc_zmq_min_port = 49153
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port=49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
-#rpc_zmq_max_port = 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port=65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
-#rpc_zmq_bind_port_retries = 100
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries=100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
-#rpc_zmq_serialization = json
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization=json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
 # a queue when server side disconnects. False means to keep queue and messages
 # even if server is disconnected, when the server appears we send all
 # accumulated messages to it. (boolean value)
-#zmq_immediate = true
+#zmq_immediate=true
 
 # Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
 # other negative value) means to skip any overrides and leave it to OS default;
 # 0 and 1 (or any other positive value) mean to disable and enable the option
 # respectively. (integer value)
-#zmq_tcp_keepalive = -1
+#zmq_tcp_keepalive=-1
 
 # The duration between two keepalive transmissions in idle condition. The unit
 # is platform dependent, for example, seconds in Linux, milliseconds in Windows
 # etc. The default value of -1 (or any other negative value and 0) means to skip
 # any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
+#zmq_tcp_keepalive_idle=-1
 
 # The number of retransmissions to be carried out before declaring that remote
 # end is not available. The default value of -1 (or any other negative value and
 # 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
+#zmq_tcp_keepalive_cnt=-1
 
 # The duration between two successive keepalive retransmissions, if
 # acknowledgement to the previous keepalive transmission is not received. The
 # unit is platform dependent, for example, seconds in Linux, milliseconds in
 # Windows etc. The default value of -1 (or any other negative value and 0) means
 # to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
+#zmq_tcp_keepalive_intvl=-1
 
 # Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
+#rpc_thread_pool_size=100
+rpc_thread_pool_size=70
 
 # Expiration timeout in seconds of a sent/received message after which it is not
 # tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
+#rpc_message_ttl=300
 
 # Wait for message acknowledgements from receivers. This mechanism works only
 # via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
+#rpc_use_acks=false
 
 # Number of seconds to wait for an ack from a cast/call. After each retry
 # attempt this timeout is multiplied by some specified multiplier. (integer
 # value)
-#rpc_ack_timeout_base = 15
+#rpc_ack_timeout_base=15
 
 # Number to multiply base ack timeout by after each retry attempt. (integer
 # value)
-#rpc_ack_timeout_multiplier = 2
+#rpc_ack_timeout_multiplier=2
 
 # Default number of message sending attempts in case of any problems occurred:
 # positive value N means at most N retries, 0 means no retries, None or -1 (or
 # any other negative values) mean to retry forever. This option is used only if
 # acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
+#rpc_retry_attempts=3
 
 # List of publisher hosts SubConsumer can subscribe on. This option has higher
 # priority then the default publishers list taken from the matchmaker. (list
@@ -8140,19 +7950,19 @@
 # The maximum body size for each  request, in bytes. (integer value)
 # Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
 # Deprecated group/name - [DEFAULT]/max_request_body_size
-#max_request_body_size = 114688
+#max_request_body_size=114688
 
 # DEPRECATED: The HTTP Header that will be used to determine what the original
 # request protocol scheme was, even if it was hidden by a SSL termination proxy.
 # (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#secure_proxy_ssl_header = X-Forwarded-Proto
+#secure_proxy_ssl_header=X-Forwarded-Proto
 
 # Whether the application is behind a proxy or not. This determines if the
 # middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
+#enable_proxy_headers_parsing=false
+enable_proxy_headers_parsing=True
 
 [oslo_policy]
 
@@ -8161,17 +7971,20 @@
 #
 
 # The file that defines policies. (string value)
-#policy_file = policy.json
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file=policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule=default
 
 # Directories where policy configuration files are stored. They can be relative
 # to any directory in the search path defined by the config_dir option, or
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
-#policy_dirs = policy.d
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs=policy.d
 
 
 [pci]
@@ -8276,7 +8089,6 @@
 
 
 [placement]
-os_region_name = openstack
 
 #
 # From nova.conf
@@ -8290,92 +8102,100 @@
 #
 # * Any string representing region name
 #  (string value)
-#os_region_name = <None>
+os_region_name = RegionOne
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = nova
+password = opnfv_secret
+auth_url=http://172.16.10.36:35357/v3
+os_interface = internal
 
 #
 # Endpoint interface for this node. This is used when picking the URL in the
 # service catalog.
 #  (string value)
-#os_interface = <None>
+#os_interface=<None>
 
 # PEM encoded Certificate Authority to use when verifying HTTPs connections.
 # (string value)
-#cafile = <None>
+#cafile=<None>
 
 # PEM encoded client certificate cert file (string value)
-#certfile = <None>
+#certfile=<None>
 
 # PEM encoded client certificate key file (string value)
-#keyfile = <None>
+#keyfile=<None>
 
 # Verify HTTPS connections. (boolean value)
-#insecure = false
+#insecure=false
 
 # Timeout value for http requests (integer value)
-#timeout = <None>
+#timeout=<None>
 
 # Authentication type to load (string value)
 # Deprecated group/name - [placement]/auth_plugin
-#auth_type = <None>
+#auth_type=<None>
 
 # Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#auth_section=<None>
 
 # Authentication URL (string value)
-#auth_url = <None>
+#auth_url=<None>
 
 # Domain ID to scope to (string value)
-#domain_id = <None>
+#domain_id=<None>
 
 # Domain name to scope to (string value)
-#domain_name = <None>
+#domain_name=<None>
 
 # Project ID to scope to (string value)
-#project_id = <None>
+#project_id=<None>
 
 # Project name to scope to (string value)
-#project_name = <None>
+#project_name=<None>
 
 # Domain ID containing project (string value)
-#project_domain_id = <None>
+#project_domain_id=<None>
 
 # Domain name containing project (string value)
-#project_domain_name = <None>
+#project_domain_name=<None>
 
 # Trust ID (string value)
-#trust_id = <None>
+#trust_id=<None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
 # value)
-#default_domain_id = <None>
+#default_domain_id=<None>
 
 # Optional domain name to use with v3 API and v2 parameters. It will be used for
 # both the user and project domain in v3 and ignored in v2 authentication.
 # (string value)
-#default_domain_name = <None>
+#default_domain_name=<None>
 
 # User ID (string value)
-#user_id = <None>
+#user_id=<None>
 
 # Username (string value)
-# Deprecated group/name - [placement]/user_name
-#username = <None>
+# Deprecated group/name - [placement]/user-name
+#username=<None>
 
 # User's domain id (string value)
-#user_domain_id = <None>
+#user_domain_id=<None>
 
 # User's domain name (string value)
-#user_domain_name = <None>
+#user_domain_name=<None>
 
 # User's password (string value)
-#password = <None>
+#password=<None>
 
 # Tenant ID (string value)
-#tenant_id = <None>
+#tenant_id=<None>
 
 # Tenant Name (string value)
-#tenant_name = <None>
+#tenant_name=<None>
 
 
 [quota]
@@ -8396,7 +8216,7 @@
 #  (integer value)
 # Minimum value: -1
 # Deprecated group/name - [DEFAULT]/quota_instances
-#instances = 10
+#instances=10
 
 #
 # The number of instance cores or vCPUs allowed per project.
@@ -8408,7 +8228,7 @@
 #  (integer value)
 # Minimum value: -1
 # Deprecated group/name - [DEFAULT]/quota_cores
-#cores = 20
+#cores=20
 
 #
 # The number of megabytes of instance RAM allowed per project.
@@ -8420,7 +8240,7 @@
 #  (integer value)
 # Minimum value: -1
 # Deprecated group/name - [DEFAULT]/quota_ram
-#ram = 51200
+#ram=51200
 
 # DEPRECATED:
 # The number of floating IPs allowed per project.
@@ -8441,7 +8261,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#floating_ips = 10
+#floating_ips=10
 
 # DEPRECATED:
 # The number of fixed IPs allowed per project.
@@ -8461,7 +8281,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#fixed_ips = -1
+#fixed_ips=-1
 
 #
 # The number of metadata items allowed per instance.
@@ -8476,7 +8296,7 @@
 #  (integer value)
 # Minimum value: -1
 # Deprecated group/name - [DEFAULT]/quota_metadata_items
-#metadata_items = 128
+#metadata_items=128
 
 #
 # The number of injected files allowed.
@@ -8496,7 +8316,7 @@
 #  (integer value)
 # Minimum value: -1
 # Deprecated group/name - [DEFAULT]/quota_injected_files
-#injected_files = 5
+#injected_files=5
 
 #
 # The number of bytes allowed per injected file.
@@ -8508,7 +8328,7 @@
 #  (integer value)
 # Minimum value: -1
 # Deprecated group/name - [DEFAULT]/quota_injected_file_content_bytes
-#injected_file_content_bytes = 10240
+#injected_file_content_bytes=10240
 
 #
 # The maximum allowed injected file path length.
@@ -8520,7 +8340,7 @@
 #  (integer value)
 # Minimum value: -1
 # Deprecated group/name - [DEFAULT]/quota_injected_file_path_length
-#injected_file_path_length = 255
+#injected_file_path_length=255
 
 # DEPRECATED:
 # The number of security groups per project.
@@ -8536,7 +8356,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#security_groups = 10
+#security_groups=10
 
 # DEPRECATED:
 # The number of security rules per security group.
@@ -8556,7 +8376,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#security_group_rules = 20
+#security_group_rules=20
 
 #
 # The maximum number of key pairs allowed per user.
@@ -8571,7 +8391,7 @@
 #  (integer value)
 # Minimum value: -1
 # Deprecated group/name - [DEFAULT]/quota_key_pairs
-#key_pairs = 100
+#key_pairs=100
 
 #
 # The maxiumum number of server groups per project.
@@ -8588,7 +8408,7 @@
 #  (integer value)
 # Minimum value: -1
 # Deprecated group/name - [DEFAULT]/quota_server_groups
-#server_groups = 10
+#server_groups=10
 
 #
 # The maximum number of servers per server group.
@@ -8600,14 +8420,16 @@
 #  (integer value)
 # Minimum value: -1
 # Deprecated group/name - [DEFAULT]/quota_server_group_members
-#server_group_members = 10
+#server_group_members=10
 
 #
 # The number of seconds until a reservation expires.
 #
 # This quota represents the time period for invalidating quota reservations.
 #  (integer value)
-#reservation_expire = 86400
+# Deprecated group/name - [DEFAULT]/reservation_expire
+#reservation_expire=86400
+reservation_expire=86400
 
 #
 # The count of reservations until usage is refreshed.
@@ -8617,7 +8439,9 @@
 # issues.
 #  (integer value)
 # Minimum value: 0
-#until_refresh = 0
+# Deprecated group/name - [DEFAULT]/until_refresh
+#until_refresh=0
+until_refresh=0
 
 #
 # The number of seconds between subsequent usage refreshes.
@@ -8628,7 +8452,8 @@
 # on a new reservation if max_age has passed since the last reservation.
 #  (integer value)
 # Minimum value: 0
-#max_age = 0
+# Deprecated group/name - [DEFAULT]/max_age
+#max_age=0
 
 # DEPRECATED:
 # The quota enforcer driver.
@@ -8644,34 +8469,7 @@
 # Deprecated group/name - [DEFAULT]/quota_driver
 # This option is deprecated for removal since 14.0.0.
 # Its value may be silently ignored in the future.
-#driver = nova.quota.DbQuotaDriver
-
-#
-# Recheck quota after resource creation to prevent allowing quota to be
-# exceeded.
-#
-# This defaults to True (recheck quota after resource creation) but can be set
-# to
-# False to avoid additional load if allowing quota to be exceeded because of
-# racing requests is considered acceptable. For example, when set to False, if a
-# user makes highly parallel REST API requests to create servers, it will be
-# possible for them to create more servers than their allowed quota during the
-# race. If their quota is 10 servers, they might be able to create 50 during the
-# burst. After the burst, they will not be able to create any more servers but
-# they will be able to keep their 50 servers until they delete them.
-#
-# The initial quota check is done before resources are created, so if multiple
-# parallel requests arrive at the same time, all could pass the quota check and
-# create resources, potentially exceeding quota. When recheck_quota is True,
-# quota will be checked a second time after resources have been created and if
-# the resource is over quota, it will be deleted and OverQuota will be raised,
-# usually resulting in a 403 response to the REST API user. This makes it
-# impossible for a user to exceed their quota with the caveat that it will,
-# however, be possible for a REST API user to be rejected with a 403 response in
-# the event of a collision close to reaching their quota limit, even if the user
-# has enough quota available when they made the request.
-#  (boolean value)
-#recheck_quota = true
+#driver=nova.quota.DbQuotaDriver
 
 
 [rdp]
@@ -8701,7 +8499,7 @@
 # * ``compute_driver``: Must be hyperv.
 #
 #  (boolean value)
-#enabled = false
+#enabled=false
 
 #
 # The URL an end user would use to connect to the RDP HTML5 console proxy.
@@ -8723,7 +8521,7 @@
 # * <scheme>://<ip-address>:<port-number>/
 #
 #   The scheme must be identical to the scheme configured for the RDP HTML5
-#   console proxy service. It is ``http`` or ``https``.
+#   console proxy service.
 #
 #   The IP address must be identical to the address on which the RDP HTML5
 #   console proxy service is listening.
@@ -8735,8 +8533,8 @@
 #
 # * ``rdp.enabled``: Must be set to ``True`` for ``html5_proxy_base_url`` to be
 #   effective.
-#  (uri value)
-#html5_proxy_base_url = http://127.0.0.1:6083/
+#  (string value)
+#html5_proxy_base_url=http://127.0.0.1:6083/
 
 
 [remote_debug]
@@ -8762,8 +8560,8 @@
 #
 #     /usr/local/bin/nova-compute --config-file /etc/nova/nova.conf
 #     --remote_debug-host <IP address where the debugger is running>
-#  (unknown value)
-#host = <None>
+#  (string value)
+#host=<None>
 
 #
 # Debug port to connect to. This command line parameter allows you to specify
@@ -8785,7 +8583,7 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#port = <None>
+#port=<None>
 
 
 [scheduler]
@@ -8803,36 +8601,31 @@
 #  (string value)
 # Allowed values: host_manager, ironic_host_manager
 # Deprecated group/name - [DEFAULT]/scheduler_host_manager
-#host_manager = host_manager
-
-#
-# The class of the driver used by the scheduler. This should be chosen from one
-# of the entrypoints under the namespace 'nova.scheduler.driver' of file
-# 'setup.cfg'. If nothing is specified in this option, the 'filter_scheduler' is
-# used.
-#
-# Other options are:
-#
-# * 'caching_scheduler' which aggressively caches the system state for better
-#   individual scheduler performance at the risk of more retries when running
-#   multiple schedulers. [DEPRECATED]
-# * 'chance_scheduler' which simply picks a host at random. [DEPRECATED]
-# * 'fake_scheduler' which is used for testing.
-#
-# Possible values:
-#
-# * Any of the drivers included in Nova:
-# ** filter_scheduler
-# ** caching_scheduler
-# ** chance_scheduler
-# ** fake_scheduler
-# * You may also set this to the entry point name of a custom scheduler driver,
-#   but you will be responsible for creating and maintaining it in your
-# setup.cfg
-#   file.
-#  (string value)
+#host_manager=host_manager
+host_manager=host_manager
+
+#
+# The class of the driver used by the scheduler.
+#
+# The options are chosen from the entry points under the namespace
+# 'nova.scheduler.driver' in 'setup.cfg'.
+#
+# Possible values:
+#
+# * A string, where the string corresponds to the class name of a scheduler
+#   driver. There are a number of options available:
+# ** 'caching_scheduler', which aggressively caches the system state for better
+#    individual scheduler performance at the risk of more retries when running
+#    multiple schedulers
+# ** 'chance_scheduler', which simply picks a host at random
+# ** 'fake_scheduler', which is used for testing
+# ** A custom scheduler driver. In this case, you will be responsible for
+#    creating and maintaining the entry point in your 'setup.cfg' file
+#  (string value)
+# Allowed values: filter_scheduler, caching_scheduler, chance_scheduler, fake_scheduler
 # Deprecated group/name - [DEFAULT]/scheduler_driver
-#driver = filter_scheduler
+#driver=filter_scheduler
+driver=filter_scheduler
 
 #
 # Periodic task interval.
@@ -8859,7 +8652,7 @@
 # * ``nova-service service_down_time``
 #  (integer value)
 # Deprecated group/name - [DEFAULT]/scheduler_driver_task_period
-#periodic_task_interval = 60
+#periodic_task_interval=60
 
 #
 # Maximum number of schedule attempts for a chosen host.
@@ -8878,7 +8671,8 @@
 #          (integer value)
 # Minimum value: 1
 # Deprecated group/name - [DEFAULT]/scheduler_max_attempts
-#max_attempts = 3
+#max_attempts=3
+max_attempts=3
 
 #
 # Periodic task interval.
@@ -8887,14 +8681,16 @@
 # to discover new hosts that have been added to cells. If negative (the
 # default), no automatic discovery will occur.
 #
-# Deployments where compute nodes come and go frequently may want this
-# enabled, where others may prefer to manually discover hosts when one
-# is added to avoid any overhead from constantly checking. If enabled,
-# every time this runs, we will select any unmapped hosts out of each
-# cell database on every run.
+# Small deployments may want this periodic task enabled, as surveying the
+# cells for new hosts is likely to be lightweight enough to not cause undue
+# burdon to the scheduler. However, larger clouds (and those that are not
+# adding hosts regularly) will likely want to disable this automatic
+# behavior and instead use the `nova-manage cell_v2 discover_hosts` command
+# when hosts have been added to a cell.
 #  (integer value)
 # Minimum value: -1
-#discover_hosts_in_cells_interval = -1
+#discover_hosts_in_cells_interval=-1
+discover_hosts_in_cells_interval=300
 
 
 [serial_console]
@@ -8913,7 +8709,7 @@
 # In order to use this feature, the service ``nova-serialproxy`` needs to run.
 # This service is typically executed on the controller node.
 #  (boolean value)
-#enabled = false
+#enabled=false
 
 #
 # A range of TCP ports a guest can use for its backend.
@@ -8928,7 +8724,7 @@
 #   Be sure that the first port number is lower than the second port number
 #   and that both are in range from 0 to 65535.
 #  (string value)
-#port_range = 10000:20000
+#port_range=10000:20000
 
 #
 # The URL an end user would use to connect to the ``nova-serialproxy`` service.
@@ -8947,7 +8743,7 @@
 #   with ``wss://`` instead of the unsecured ``ws://``. The options ``cert``
 #   and ``key`` in the ``[DEFAULT]`` section have to be set for that.
 #  (uri value)
-#base_url = ws://127.0.0.1:6083/
+#base_url=ws://127.0.0.1:6083/
 
 #
 # The IP address to which proxy clients (like ``nova-serialproxy``) should
@@ -8955,7 +8751,7 @@
 #
 # This is typically the IP address of the host of a ``nova-compute`` service.
 #  (string value)
-#proxyclient_address = 127.0.0.1
+#proxyclient_address=127.0.0.1
 
 #
 # The IP address which is used by the ``nova-serialproxy`` service to listen
@@ -8969,7 +8765,7 @@
 # * Ensure that this is the same IP address which is defined in the option
 #   ``base_url`` of this section or use ``0.0.0.0`` to listen on all addresses.
 #  (string value)
-#serialproxy_host = 0.0.0.0
+#serialproxy_host=0.0.0.0
 
 #
 # The port number which is used by the ``nova-serialproxy`` service to listen
@@ -8985,7 +8781,7 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#serialproxy_port = 6083
+#serialproxy_port=6083
 
 
 [service_user]
@@ -9002,7 +8798,7 @@
 # When True, if sending a user token to an REST API, also send a service token.
 #
 # Nova often reuses the user token provided to the nova-api to talk to other
-# REST APIs, such as Cinder, Glance and Neutron. It is possible that while the
+# REST APIs, such as Cinder and Neutron. It is possible that while the
 # user token was valid when the request was made to Nova, the token may expire
 # before it reaches the other service. To avoid any failures, and to
 # make it clear it is Nova calling the service on the users behalf, we include
@@ -9013,86 +8809,86 @@
 # This feature is currently experimental, and as such is turned off by default
 # while full testing and performance tuning of this feature is completed.
 #  (boolean value)
-#send_service_user_token = false
+#send_service_user_token=false
 
 # PEM encoded Certificate Authority to use when verifying HTTPs connections.
 # (string value)
-#cafile = <None>
+#cafile=<None>
 
 # PEM encoded client certificate cert file (string value)
-#certfile = <None>
+#certfile=<None>
 
 # PEM encoded client certificate key file (string value)
-#keyfile = <None>
+#keyfile=<None>
 
 # Verify HTTPS connections. (boolean value)
-#insecure = false
+#insecure=false
 
 # Timeout value for http requests (integer value)
-#timeout = <None>
+#timeout=<None>
 
 # Authentication type to load (string value)
 # Deprecated group/name - [service_user]/auth_plugin
-#auth_type = <None>
+#auth_type=<None>
 
 # Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#auth_section=<None>
 
 # Authentication URL (string value)
-#auth_url = <None>
+#auth_url=<None>
 
 # Domain ID to scope to (string value)
-#domain_id = <None>
+#domain_id=<None>
 
 # Domain name to scope to (string value)
-#domain_name = <None>
+#domain_name=<None>
 
 # Project ID to scope to (string value)
-#project_id = <None>
+#project_id=<None>
 
 # Project name to scope to (string value)
-#project_name = <None>
+#project_name=<None>
 
 # Domain ID containing project (string value)
-#project_domain_id = <None>
+#project_domain_id=<None>
 
 # Domain name containing project (string value)
-#project_domain_name = <None>
+#project_domain_name=<None>
 
 # Trust ID (string value)
-#trust_id = <None>
+#trust_id=<None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
 # value)
-#default_domain_id = <None>
+#default_domain_id=<None>
 
 # Optional domain name to use with v3 API and v2 parameters. It will be used for
 # both the user and project domain in v3 and ignored in v2 authentication.
 # (string value)
-#default_domain_name = <None>
+#default_domain_name=<None>
 
 # User ID (string value)
-#user_id = <None>
+#user_id=<None>
 
 # Username (string value)
-# Deprecated group/name - [service_user]/user_name
-#username = <None>
+# Deprecated group/name - [service_user]/user-name
+#username=<None>
 
 # User's domain id (string value)
-#user_domain_id = <None>
+#user_domain_id=<None>
 
 # User's domain name (string value)
-#user_domain_name = <None>
+#user_domain_name=<None>
 
 # User's password (string value)
-#password = <None>
+#password=<None>
 
 # Tenant ID (string value)
-#tenant_id = <None>
+#tenant_id=<None>
 
 # Tenant Name (string value)
-#tenant_name = <None>
+#tenant_name=<None>
 
 
 [spice]
@@ -9107,7 +8903,8 @@
 # * vnc.enabled set to False
 # * update html5proxy_base_url
 # * update server_proxyclient_address
-
+enabled = false
+html5proxy_base_url = http://10.16.0.107:6080/spice_auto.html
 #
 # From nova.conf
 #
@@ -9120,7 +8917,7 @@
 # * VNC must be explicitly disabled to get access to the SPICE console. Set the
 #   enabled option to False in the [vnc] section to disable the VNC console.
 #  (boolean value)
-#enabled = false
+#enabled=false
 
 #
 # Enable the SPICE guest agent support on the instances.
@@ -9138,7 +8935,7 @@
 #   needing to click inside the console or press keys to release it. The
 #   performance of mouse movement is also improved.
 #  (boolean value)
-#agent_enabled = true
+#agent_enabled=true
 
 #
 # Location of the SPICE HTML5 console proxy.
@@ -9162,7 +8959,7 @@
 #   The access URL returned by the compute node must have the host
 #   and port where the ``nova-spicehtml5proxy`` service is listening.
 #  (uri value)
-#html5proxy_base_url = http://127.0.0.1:6082/spice_auto.html
+#html5proxy_base_url=http://127.0.0.1:6082/spice_auto.html
 
 #
 # The  address where the SPICE server running on the instances should listen.
@@ -9175,7 +8972,7 @@
 #
 # * IP address to listen on.
 #  (string value)
-#server_listen = 127.0.0.1
+#server_listen=127.0.0.1
 
 #
 # The address used by ``nova-spicehtml5proxy`` client to connect to instance
@@ -9195,7 +8992,7 @@
 #   The proxy client must be able to access the address specified in
 #   ``server_listen`` using the value of this option.
 #  (string value)
-#server_proxyclient_address = 127.0.0.1
+#server_proxyclient_address=127.0.0.1
 
 #
 # A keyboard layout which is supported by the underlying hypervisor on this
@@ -9206,7 +9003,7 @@
 #   use QEMU as hypervisor, you should find the list of supported keyboard
 #   layouts at /usr/share/qemu/keymaps.
 #  (string value)
-#keymap = en-us
+#keymap=en-us
 
 #
 # IP address or a hostname on which the ``nova-spicehtml5proxy`` service
@@ -9217,8 +9014,8 @@
 # * This option depends on the ``html5proxy_base_url`` option.
 #   The ``nova-spicehtml5proxy`` service must be listening on a host that is
 #   accessible from the HTML5 client.
-#  (unknown value)
-#html5proxy_host = 0.0.0.0
+#  (string value)
+#html5proxy_host=0.0.0.0
 
 #
 # Port on which the ``nova-spicehtml5proxy`` service listens for incoming
@@ -9232,7 +9029,34 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#html5proxy_port = 6082
+#html5proxy_port=6082
+
+
+[ssl]
+
+#
+# From nova.conf
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#cert_file=<None>
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#key_file=<None>
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+#version=<None>
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
+#ciphers=<None>
 
 
 [trusted_computing]
@@ -9243,7 +9067,7 @@
 # From nova.conf
 #
 
-# DEPRECATED:
+#
 # The host to use as the attestation server.
 #
 # Cloud computing pools can involve thousands of compute nodes located at
@@ -9269,13 +9093,10 @@
 # * attestation_auth_blob
 # * attestation_auth_timeout
 # * attestation_insecure_ssl
-#  (unknown value)
-# This option is deprecated for removal since Pike.
-# Its value may be silently ignored in the future.
-# Reason: Incomplete filter
-#attestation_server = <None>
-
-# DEPRECATED:
+#  (string value)
+#attestation_server=<None>
+
+#
 # The absolute path to the certificate to use for authentication when connecting
 # to the attestation server. See the `attestation_server` help text for more
 # information about host verification.
@@ -9298,12 +9119,9 @@
 # * attestation_auth_timeout
 # * attestation_insecure_ssl
 #  (string value)
-# This option is deprecated for removal since Pike.
-# Its value may be silently ignored in the future.
-# Reason: Incomplete filter
-#attestation_server_ca_file = <None>
-
-# DEPRECATED:
+#attestation_server_ca_file=<None>
+
+#
 # The port to use when connecting to the attestation server. See the
 # `attestation_server` help text for more information about host verification.
 #
@@ -9322,12 +9140,9 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-# This option is deprecated for removal since Pike.
-# Its value may be silently ignored in the future.
-# Reason: Incomplete filter
-#attestation_port = 8443
-
-# DEPRECATED:
+#attestation_port=8443
+
+#
 # The URL on the attestation server to use. See the `attestation_server` help
 # text for more information about host verification.
 #
@@ -9352,12 +9167,9 @@
 # * attestation_auth_timeout
 # * attestation_insecure_ssl
 #  (string value)
-# This option is deprecated for removal since Pike.
-# Its value may be silently ignored in the future.
-# Reason: Incomplete filter
-#attestation_api_url = /OpenAttestationWebServices/V1.0
-
-# DEPRECATED:
+#attestation_api_url=/OpenAttestationWebServices/V1.0
+
+#
 # Attestation servers require a specific blob that is used to authenticate. The
 # content and format of the blob are determined by the particular attestation
 # server being used. There is no default value; you must supply the value as
@@ -9382,12 +9194,9 @@
 # * attestation_auth_timeout
 # * attestation_insecure_ssl
 #  (string value)
-# This option is deprecated for removal since Pike.
-# Its value may be silently ignored in the future.
-# Reason: Incomplete filter
-#attestation_auth_blob = <None>
-
-# DEPRECATED:
+#attestation_auth_blob=<None>
+
+#
 # This value controls how long a successful attestation is cached. Once this
 # period has elapsed, a new attestation request will be made. See the
 # `attestation_server` help text for more information about host verification.
@@ -9411,13 +9220,9 @@
 # * attestation_auth_blob
 # * attestation_insecure_ssl
 #  (integer value)
-# Minimum value: 0
-# This option is deprecated for removal since Pike.
-# Its value may be silently ignored in the future.
-# Reason: Incomplete filter
-#attestation_auth_timeout = 60
-
-# DEPRECATED:
+#attestation_auth_timeout=60
+
+#
 # When set to True, the SSL certificate verification is skipped for the
 # attestation service. See the `attestation_server` help text for more
 # information about host verification.
@@ -9435,10 +9240,7 @@
 # * attestation_auth_blob
 # * attestation_auth_timeout
 #  (boolean value)
-# This option is deprecated for removal since Pike.
-# Its value may be silently ignored in the future.
-# Reason: Incomplete filter
-#attestation_insecure_ssl = false
+#attestation_insecure_ssl=false
 
 
 [upgrade_levels]
@@ -9485,34 +9287,34 @@
 # * An OpenStack release name, in lower case, such as 'mitaka' or
 #   'liberty'.
 #  (string value)
-#compute = <None>
+#compute=<None>
 
 # Cells RPC API version cap (string value)
-#cells = <None>
+#cells=<None>
 
 # Intercell RPC API version cap (string value)
-#intercell = <None>
+#intercell=<None>
 
 # Cert RPC API version cap (string value)
-#cert = <None>
+#cert=<None>
 
 # Scheduler RPC API version cap (string value)
-#scheduler = <None>
+#scheduler=<None>
 
 # Conductor RPC API version cap (string value)
-#conductor = <None>
+#conductor=<None>
 
 # Console RPC API version cap (string value)
-#console = <None>
+#console=<None>
 
 # Consoleauth RPC API version cap (string value)
-#consoleauth = <None>
+#consoleauth=<None>
 
 # Network RPC API version cap (string value)
-#network = <None>
+#network=<None>
 
 # Base API RPC API version cap (string value)
-#baseapi = <None>
+#baseapi=<None>
 
 
 [vendordata_dynamic_auth]
@@ -9526,82 +9328,82 @@
 
 # PEM encoded Certificate Authority to use when verifying HTTPs connections.
 # (string value)
-#cafile = <None>
+#cafile=<None>
 
 # PEM encoded client certificate cert file (string value)
-#certfile = <None>
+#certfile=<None>
 
 # PEM encoded client certificate key file (string value)
-#keyfile = <None>
+#keyfile=<None>
 
 # Verify HTTPS connections. (boolean value)
-#insecure = false
+#insecure=false
 
 # Timeout value for http requests (integer value)
-#timeout = <None>
+#timeout=<None>
 
 # Authentication type to load (string value)
 # Deprecated group/name - [vendordata_dynamic_auth]/auth_plugin
-#auth_type = <None>
+#auth_type=<None>
 
 # Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#auth_section=<None>
 
 # Authentication URL (string value)
-#auth_url = <None>
+#auth_url=<None>
 
 # Domain ID to scope to (string value)
-#domain_id = <None>
+#domain_id=<None>
 
 # Domain name to scope to (string value)
-#domain_name = <None>
+#domain_name=<None>
 
 # Project ID to scope to (string value)
-#project_id = <None>
+#project_id=<None>
 
 # Project name to scope to (string value)
-#project_name = <None>
+#project_name=<None>
 
 # Domain ID containing project (string value)
-#project_domain_id = <None>
+#project_domain_id=<None>
 
 # Domain name containing project (string value)
-#project_domain_name = <None>
+#project_domain_name=<None>
 
 # Trust ID (string value)
-#trust_id = <None>
+#trust_id=<None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
 # value)
-#default_domain_id = <None>
+#default_domain_id=<None>
 
 # Optional domain name to use with v3 API and v2 parameters. It will be used for
 # both the user and project domain in v3 and ignored in v2 authentication.
 # (string value)
-#default_domain_name = <None>
+#default_domain_name=<None>
 
 # User ID (string value)
-#user_id = <None>
+#user_id=<None>
 
 # Username (string value)
-# Deprecated group/name - [vendordata_dynamic_auth]/user_name
-#username = <None>
+# Deprecated group/name - [vendordata_dynamic_auth]/user-name
+#username=<None>
 
 # User's domain id (string value)
-#user_domain_id = <None>
+#user_domain_id=<None>
 
 # User's domain name (string value)
-#user_domain_name = <None>
+#user_domain_name=<None>
 
 # User's password (string value)
-#password = <None>
+#password=<None>
 
 # Tenant ID (string value)
-#tenant_id = <None>
+#tenant_id=<None>
 
 # Tenant Name (string value)
-#tenant_name = <None>
+#tenant_name=<None>
 
 
 [vmware]
@@ -9630,7 +9432,7 @@
 #
 # * Any valid string representing VLAN interface name
 #  (string value)
-#vlan_interface = vmnic0
+#vlan_interface=vmnic0
 
 #
 # This option should be configured only when using the NSX-MH Neutron
@@ -9642,14 +9444,14 @@
 #
 # * Any valid string representing the name of the integration bridge
 #  (string value)
-#integration_bridge = <None>
+#integration_bridge=<None>
 
 #
 # Set this value if affected by an increased network latency causing
 # repeated characters when typing in a remote console.
 #  (integer value)
 # Minimum value: 0
-#console_delay_seconds = <None>
+#console_delay_seconds=<None>
 
 #
 # Identifies the remote system where the serial port traffic will
@@ -9664,7 +9466,7 @@
 #
 # * Any valid URI
 #  (string value)
-#serial_port_service_uri = <None>
+#serial_port_service_uri=<None>
 
 #
 # Identifies a proxy service that provides network access to the
@@ -9672,34 +9474,34 @@
 #
 # Possible values:
 #
-# * Any valid URI (The scheme is 'telnet' or 'telnets'.)
+# * Any valid URI
 #
 # Related options:
 # This option is ignored if serial_port_service_uri is not specified.
 # * serial_port_service_uri
-#  (uri value)
-#serial_port_proxy_uri = <None>
-
-#
-# Hostname or IP address for connection to VMware vCenter host. (unknown value)
-#host_ip = <None>
+#  (string value)
+#serial_port_proxy_uri=<None>
+
+#
+# Hostname or IP address for connection to VMware vCenter host. (string value)
+#host_ip=<None>
 
 # Port for connection to VMware vCenter host. (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
+#host_port=443
 
 # Username for connection to VMware vCenter host. (string value)
-#host_username = <None>
+#host_username=<None>
 
 # Password for connection to VMware vCenter host. (string value)
-#host_password = <None>
+#host_password=<None>
 
 #
 # Specifies the CA bundle file to be used in verifying the vCenter
 # server certificate.
 #  (string value)
-#ca_file = <None>
+#ca_file=<None>
 
 #
 # If true, the vCenter server certificate is not verified. If false,
@@ -9708,10 +9510,10 @@
 # Related options:
 # * ca_file: This option is ignored if "ca_file" is set.
 #  (boolean value)
-#insecure = false
+#insecure=false
 
 # Name of a VMware Cluster ComputeResource. (string value)
-#cluster_name = <None>
+#cluster_name=<None>
 
 #
 # Regular expression pattern to match the name of datastore.
@@ -9727,20 +9529,20 @@
 #
 # * Any matching regular expression to a datastore must be given
 #  (string value)
-#datastore_regex = <None>
+#datastore_regex=<None>
 
 #
 # Time interval in seconds to poll remote tasks invoked on
 # VMware VC server.
 #  (floating point value)
-#task_poll_interval = 0.5
+#task_poll_interval=0.5
 
 #
 # Number of times VMware vCenter server API must be retried on connection
 # failures, e.g. socket error, etc.
 #  (integer value)
 # Minimum value: 0
-#api_retry_count = 10
+#api_retry_count=10
 
 #
 # This option specifies VNC starting port.
@@ -9760,13 +9562,13 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#vnc_port = 5900
+#vnc_port=5900
 
 #
 # Total number of VNC ports.
 #  (integer value)
 # Minimum value: 0
-#vnc_port_total = 10000
+#vnc_port_total=10000
 
 #
 # This option enables/disables the use of linked clone.
@@ -9784,7 +9586,27 @@
 # is avoided as it creates copy of the virtual machine that shares
 # virtual disks with its parent VM.
 #  (boolean value)
-#use_linked_clone = true
+#use_linked_clone=true
+
+# DEPRECATED:
+# This option specifies VIM Service WSDL Location
+#
+# If vSphere API versions 5.1 and later is being used, this section can
+# be ignored. If version is less than 5.1, WSDL files must be hosted
+# locally and their location must be specified in the above section.
+#
+# Optional over-ride to default location for bug work-arounds.
+#
+# Possible values:
+#
+# * http://<server>/vimService.wsdl
+# * file:///opt/stack/vmware/SDK/wsdl/vim25/vimService.wsdl
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Only vCenter versions earlier than 5.1 require this option and the
+# current minimum version is 5.1.
+#wsdl_location=<None>
 
 #
 # This option enables or disables storage policy based placement
@@ -9794,7 +9616,7 @@
 #
 # * pbm_default_policy
 #  (boolean value)
-#pbm_enabled = false
+#pbm_enabled=false
 
 #
 # This option specifies the PBM service WSDL file location URL.
@@ -9807,7 +9629,7 @@
 # * Any valid file path
 #   e.g file:///opt/SDK/spbm/wsdl/pbmService.wsdl
 #  (string value)
-#pbm_wsdl_location = <None>
+#pbm_wsdl_location=<None>
 
 #
 # This option specifies the default policy to be used.
@@ -9823,7 +9645,7 @@
 #
 # * pbm_enabled
 #  (string value)
-#pbm_default_policy = <None>
+#pbm_default_policy=<None>
 
 #
 # This option specifies the limit on the maximum number of objects to
@@ -9835,7 +9657,7 @@
 # Any remaining objects may be retrieved with additional requests.
 #  (integer value)
 # Minimum value: 0
-#maximum_objects = 100
+#maximum_objects=100
 
 #
 # This option adds a prefix to the folder where cached images are stored
@@ -9850,7 +9672,7 @@
 #
 # * Any string representing the cache prefix to the folder
 #  (string value)
-#cache_prefix = <None>
+#cache_prefix=<None>
 
 
 [vnc]
@@ -9869,7 +9691,8 @@
 # (for example Horizon) can then establish a VNC connection to the guest.
 #  (boolean value)
 # Deprecated group/name - [DEFAULT]/vnc_enabled
-#enabled = true
+#enabled=true
+enabled=true
 
 #
 # Keymap for VNC.
@@ -9885,13 +9708,14 @@
 #   of supported keyboard layouts at ``/usr/share/qemu/keymaps``.
 #  (string value)
 # Deprecated group/name - [DEFAULT]/vnc_keymap
-#keymap = en-us
+#keymap=en-us
 
 #
 # The IP address or hostname on which an instance should listen to for
 # incoming VNC connection requests on this node.
-#  (unknown value)
-#vncserver_listen = 127.0.0.1
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vncserver_listen
+#vncserver_listen=127.0.0.1
 
 #
 # Private, internal IP address or hostname of VNC console proxy.
@@ -9901,8 +9725,9 @@
 #
 # This option sets the private address to which proxy clients, such as
 # ``nova-xvpvncproxy``, should connect to.
-#  (unknown value)
-#vncserver_proxyclient_address = 127.0.0.1
+#  (string value)
+# Deprecated group/name - [DEFAULT]/vncserver_proxyclient_address
+#vncserver_proxyclient_address=127.0.0.1
 
 #
 # Public address of noVNC VNC console proxy.
@@ -9920,7 +9745,14 @@
 # * novncproxy_host
 # * novncproxy_port
 #  (uri value)
-#novncproxy_base_url = http://127.0.0.1:6080/vnc_auto.html
+# Deprecated group/name - [DEFAULT]/novncproxy_base_url
+#novncproxy_base_url=http://127.0.0.1:6080/vnc_auto.html
+enabled = true
+novncproxy_host = 0.0.0.0
+novncproxy_base_url = http://10.16.0.107:6080/vnc_auto.html
+novncproxy_port=6080
+vncserver_listen=0.0.0.0
+keymap = en-us
 
 #
 # IP address or hostname that the XVP VNC console proxy should bind to.
@@ -9938,8 +9770,9 @@
 #
 # * xvpvncproxy_port
 # * xvpvncproxy_base_url
-#  (unknown value)
-#xvpvncproxy_host = 0.0.0.0
+#  (string value)
+# Deprecated group/name - [DEFAULT]/xvpvncproxy_host
+#xvpvncproxy_host=0.0.0.0
 
 #
 # Port that the XVP VNC console proxy should bind to.
@@ -9960,7 +9793,8 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#xvpvncproxy_port = 6081
+# Deprecated group/name - [DEFAULT]/xvpvncproxy_port
+#xvpvncproxy_port=6081
 
 #
 # Public URL address of XVP VNC console proxy.
@@ -9980,7 +9814,8 @@
 # * xvpvncproxy_host
 # * xvpvncproxy_port
 #  (uri value)
-#xvpvncproxy_base_url = http://127.0.0.1:6081/console
+# Deprecated group/name - [DEFAULT]/xvpvncproxy_base_url
+#xvpvncproxy_base_url=http://127.0.0.1:6081/console
 
 #
 # IP address that the noVNC console proxy should bind to.
@@ -9997,7 +9832,8 @@
 # * novncproxy_port
 # * novncproxy_base_url
 #  (string value)
-#novncproxy_host = 0.0.0.0
+# Deprecated group/name - [DEFAULT]/novncproxy_host
+#novncproxy_host=0.0.0.0
 
 #
 # Port that the noVNC console proxy should bind to.
@@ -10016,7 +9852,8 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#novncproxy_port = 6080
+# Deprecated group/name - [DEFAULT]/novncproxy_port
+#novncproxy_port=6080
 
 
 [workarounds]
@@ -10048,7 +9885,7 @@
 #
 # * Any options that affect 'rootwrap' will be ignored.
 #  (boolean value)
-#disable_rootwrap = false
+#disable_rootwrap=false
 
 #
 # Disable live snapshots when using the libvirt driver.
@@ -10073,7 +9910,7 @@
 # * False: Live snapshots are always used when snapshotting (as long as
 #   there is a new enough libvirt and the backend storage supports it)
 #  (boolean value)
-#disable_libvirt_livesnapshot = true
+#disable_libvirt_livesnapshot=true
 
 #
 # Enable handling of events emitted from compute drivers.
@@ -10105,24 +9942,7 @@
 #   then instances that get out of sync between the hypervisor and the Nova
 #   database will have to be synchronized manually.
 #  (boolean value)
-#handle_virt_lifecycle_events = true
-
-#
-# Disable the server group policy check upcall in compute.
-#
-# In order to detect races with server group affinity policy, the compute
-# service attempts to validate that the policy was not violated by the
-# scheduler. It does this by making an upcall to the API database to list
-# the instances in the server group for one that it is booting, which violates
-# our api/cell isolation goals. Eventually this will be solved by proper
-# affinity
-# guarantees in the scheduler and placement service, but until then, this late
-# check is needed to ensure proper affinity policy.
-#
-# Operators that desire api/cell isolation over this check should
-# enable this flag, which will avoid making that upcall from compute.
-#  (boolean value)
-#disable_group_policy_check_upcall = false
+#handle_virt_lifecycle_events=true
 
 
 [wsgi]
@@ -10141,16 +9961,15 @@
 #
 # * A string representing file name for the paste.deploy config.
 #  (string value)
-#api_paste_config = api-paste.ini
-
-# DEPRECATED:
+# Deprecated group/name - [DEFAULT]/api_paste_config
+api_paste_config=/etc/nova/api-paste.ini
+
+#
 # It represents a python format string that is used as the template to generate
 # log lines. The following values can be formatted into it: client_ip,
 # date_time, request_line, status_code, body_length, wall_seconds.
 #
-# This option is used for building custom request loglines when running
-# nova-api under eventlet. If used under uwsgi or apache, this option
-# has no effect.
+# This option is used for building custom request loglines.
 #
 # Possible values:
 #
@@ -10158,14 +9977,8 @@
 #   'len: %(body_length)s time: %(wall_seconds).7f' (default)
 # * Any formatted string formed by specific values.
 #  (string value)
-# This option is deprecated for removal since 16.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option only works when running nova-api under eventlet, and
-# encodes very eventlet specific pieces of information. Starting in Pike
-# the preferred model for running nova-api is under uwsgi or apache
-# mod_wsgi.
-#wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f
+# Deprecated group/name - [DEFAULT]/wsgi_log_format
+#wsgi_log_format=%(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f
 
 #
 # This option specifies the HTTP header used to determine the protocol scheme
@@ -10173,25 +9986,11 @@
 #
 # Possible values:
 #
-# * None (default) - the request scheme is not influenced by any HTTP headers
+# * None (default) - the request scheme is not influenced by any HTTP headers.
 # * Valid HTTP header, like HTTP_X_FORWARDED_PROTO
-#
-# WARNING: Do not set this unless you know what you are doing.
-#
-# Make sure ALL of the following are true before setting this (assuming the
-# values from the example above):
-# * Your API is behind a proxy.
-# * Your proxy strips the X-Forwarded-Proto header from all incoming requests.
-#   In other words, if end users include that header in their requests, the
-# proxy
-#   will discard it.
-# * Your proxy sets the X-Forwarded-Proto header and sends it to API, but only
-#   for requests that originally come in via HTTPS.
-#
-# If any of those are not true, you should keep this setting set to None.
-#
-#  (string value)
-#secure_proxy_ssl_header = <None>
+#  (string value)
+# Deprecated group/name - [DEFAULT]/secure_proxy_ssl_header
+#secure_proxy_ssl_header=<None>
 
 #
 # This option allows setting path to the CA certificate file that should be used
@@ -10205,7 +10004,8 @@
 #
 # * enabled_ssl_apis
 #  (string value)
-#ssl_ca_file = <None>
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+#ssl_ca_file=<None>
 
 #
 # This option allows setting path to the SSL certificate of API server.
@@ -10218,7 +10018,8 @@
 #
 # * enabled_ssl_apis
 #  (string value)
-#ssl_cert_file = <None>
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#ssl_cert_file=<None>
 
 #
 # This option specifies the path to the file where SSL private key of API
@@ -10232,7 +10033,8 @@
 #
 # * enabled_ssl_apis
 #  (string value)
-#ssl_key_file = <None>
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#ssl_key_file=<None>
 
 #
 # This option sets the value of TCP_KEEPIDLE in seconds for each server socket.
@@ -10245,7 +10047,8 @@
 # * keep_alive
 #  (integer value)
 # Minimum value: 0
-#tcp_keepidle = 600
+# Deprecated group/name - [DEFAULT]/tcp_keepidle
+#tcp_keepidle=600
 
 #
 # This option specifies the size of the pool of greenthreads used by wsgi.
@@ -10254,7 +10057,7 @@
 #  (integer value)
 # Minimum value: 0
 # Deprecated group/name - [DEFAULT]/wsgi_default_pool_size
-#default_pool_size = 1000
+#default_pool_size=1000
 
 #
 # This option specifies the maximum line size of message headers to be accepted.
@@ -10267,7 +10070,8 @@
 # self-defined message length.
 #  (integer value)
 # Minimum value: 0
-#max_header_line = 16384
+# Deprecated group/name - [DEFAULT]/max_header_line
+#max_header_line=16384
 
 #
 # This option allows using the same TCP connection to send and receive multiple
@@ -10284,7 +10088,7 @@
 # * tcp_keepidle
 #  (boolean value)
 # Deprecated group/name - [DEFAULT]/wsgi_keep_alive
-#keep_alive = true
+#keep_alive=true
 
 #
 # This option specifies the timeout for client connections' socket operations.
@@ -10293,7 +10097,8 @@
 # connection. To wait forever set to 0.
 #  (integer value)
 # Minimum value: 0
-#client_socket_timeout = 900
+# Deprecated group/name - [DEFAULT]/client_socket_timeout
+#client_socket_timeout=900
 
 
 [xenserver]
@@ -10340,7 +10145,7 @@
 #
 #  (integer value)
 # Minimum value: 0
-#agent_timeout = 30
+#agent_timeout=30
 
 #
 # Number of seconds to wait for agent't reply to version request.
@@ -10358,7 +10163,7 @@
 # operational.
 #  (integer value)
 # Minimum value: 0
-#agent_version_timeout = 300
+#agent_version_timeout=300
 
 #
 # Number of seconds to wait for agent's reply to resetnetwork
@@ -10369,7 +10174,7 @@
 # agent communication ``agent_timeout`` is ignored in this case.
 #  (integer value)
 # Minimum value: 0
-#agent_resetnetwork_timeout = 60
+#agent_resetnetwork_timeout=60
 
 #
 # Path to locate guest agent on the server.
@@ -10384,7 +10189,7 @@
 # * ``compute_driver`` should be set to ``xenapi.XenAPIDriver``
 #
 #  (string value)
-#agent_path = usr/sbin/xe-update-networking
+#agent_path=usr/sbin/xe-update-networking
 
 #
 # Disables the use of XenAPI agent.
@@ -10399,7 +10204,7 @@
 # * ``use_agent_default``
 #
 #  (boolean value)
-#disable_agent = false
+#disable_agent=false
 
 #
 # Whether or not to use the agent by default when its usage is enabled but not
@@ -10420,11 +10225,11 @@
 # * ``disable_agent``
 #
 #  (boolean value)
-#use_agent_default = false
+#use_agent_default=false
 
 # Timeout in seconds for XenAPI login. (integer value)
 # Minimum value: 0
-#login_timeout = 10
+#login_timeout=10
 
 #
 # Maximum number of concurrent XenAPI connections.
@@ -10434,7 +10239,94 @@
 # session, which allows you to make concurrent XenAPI connections.
 #  (integer value)
 # Minimum value: 1
-#connection_concurrent = 5
+#connection_concurrent=5
+
+# DEPRECATED:
+# Base URL for torrent files; must contain a slash character (see RFC 1808,
+# step 6).
+#  (string value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_base_url=<None>
+
+# DEPRECATED: Probability that peer will become a seeder (1.0 = 100%) (floating
+# point value)
+# Minimum value: 0
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_seed_chance=1.0
+
+# DEPRECATED:
+# Number of seconds after downloading an image via BitTorrent that it should
+# be seeded for other peers.'
+#  (integer value)
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_seed_duration=3600
+
+# DEPRECATED:
+# Cached torrent files not accessed within this number of seconds can be reaped.
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_max_last_accessed=86400
+
+# DEPRECATED: Beginning of port range to listen on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_listen_port_start=6881
+
+# DEPRECATED: End of port range to listen on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_listen_port_end=6891
+
+# DEPRECATED:
+# Number of seconds a download can remain at the same progress percentage w/o
+# being considered a stall.
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_download_stall_cutoff=600
+
+# DEPRECATED:
+# Maximum number of seeder processes to run concurrently within a given dom0
+# (-1 = no limit).
+#  (integer value)
+# Minimum value: -1
+# This option is deprecated for removal since 15.0.0.
+# Its value may be silently ignored in the future.
+# Reason:
+# The torrent feature has not been tested nor maintained, and as such is being
+# removed.
+#torrent_max_seeder_processes_per_host=1
 
 #
 # Cache glance images locally.
@@ -10452,7 +10344,7 @@
 # * `none`: turns off caching entirely.
 #  (string value)
 # Allowed values: all, some, none
-#cache_images = all
+#cache_images=all
 
 #
 # Compression level for images.
@@ -10471,14 +10363,14 @@
 #  (integer value)
 # Minimum value: 1
 # Maximum value: 9
-#image_compression_level = <None>
+#image_compression_level=<None>
 
 # Default OS type used when uploading an image to glance (string value)
-#default_os_type = linux
+#default_os_type=linux
 
 # Time in secs to wait for a block device to be created (integer value)
 # Minimum value: 1
-#block_device_creation_timeout = 10
+#block_device_creation_timeout=10
 
 #
 # Maximum size in bytes of kernel or ramdisk images.
@@ -10486,7 +10378,7 @@
 # Specifying the maximum size of kernel or ramdisk will avoid copying
 # large files to dom0 and fill up /boot/guest.
 #  (integer value)
-#max_kernel_ramdisk_size = 16777216
+#max_kernel_ramdisk_size=16777216
 
 #
 # Filter for finding the SR to be used to install guest instances on.
@@ -10500,21 +10392,37 @@
 # * To fall back on the Default SR, as displayed by XenCenter,
 #   set this flag to: default-sr:true.
 #  (string value)
-#sr_matching_filter = default-sr:true
+#sr_matching_filter=default-sr:true
 
 #
 # Whether to use sparse_copy for copying data on a resize down.
 # (False will use standard dd). This speeds up resizes down
 # considerably since large runs of zeros won't have to be rsynced.
 #  (boolean value)
-#sparse_copy = true
+#sparse_copy=true
 
 #
 # Maximum number of retries to unplug VBD.
 # If set to 0, should try once, no retries.
 #  (integer value)
 # Minimum value: 0
-#num_vbd_unplug_retries = 10
+#num_vbd_unplug_retries=10
+
+#
+# Whether or not to download images via Bit Torrent.
+#
+# The value for this option must be chosen from the choices listed
+# here. Configuring a value other than these will default to 'none'.
+#
+# Possible values:
+#
+# * `all`: will download all images.
+# * `some`: will only download images that have the image_property
+#           `bittorrent=true`.
+# * `none`: will turnoff downloading images via Bit Torrent.
+#  (string value)
+# Allowed values: all, some, none
+#torrent_images=none
 
 #
 # Name of network to use for booting iPXE ISOs.
@@ -10530,7 +10438,7 @@
 # * `ipxe_boot_menu_url`
 # * `ipxe_mkisofs_cmd`
 #  (string value)
-#ipxe_network_name = <None>
+#ipxe_network_name=<None>
 
 #
 # URL to the iPXE boot menu.
@@ -10546,7 +10454,7 @@
 # * `ipxe_network_name`
 # * `ipxe_mkisofs_cmd`
 #  (string value)
-#ipxe_boot_menu_url = <None>
+#ipxe_boot_menu_url=<None>
 
 #
 # Name and optionally path of the tool used for ISO image creation.
@@ -10563,7 +10471,7 @@
 # * `ipxe_network_name`
 # * `ipxe_boot_menu_url`
 #  (string value)
-#ipxe_mkisofs_cmd = mkisofs
+#ipxe_mkisofs_cmd=mkisofs
 
 #
 # URL for connection to XenServer/Xen Cloud Platform. A special value
@@ -10575,13 +10483,13 @@
 #   generally the management network IP address of the XenServer.
 # * This option must be set if you chose the XenServer driver.
 #  (string value)
-#connection_url = <None>
+#connection_url=<None>
 
 # Username for connection to XenServer/Xen Cloud Platform (string value)
-#connection_username = root
+#connection_username=root
 
 # Password for connection to XenServer/Xen Cloud Platform (string value)
-#connection_password = <None>
+#connection_password=<None>
 
 #
 # The interval used for polling of coalescing vhds.
@@ -10595,7 +10503,7 @@
 # * `vhd_coalesce_max_attempts`
 #  (floating point value)
 # Minimum value: 0
-#vhd_coalesce_poll_interval = 5.0
+#vhd_coalesce_poll_interval=5.0
 
 #
 # Ensure compute service is running on host XenAPI connects to.
@@ -10612,7 +10520,7 @@
 #
 # * `independent_compute`
 #  (boolean value)
-#check_host = true
+#check_host=true
 
 #
 # Max number of times to poll for VHD to coalesce.
@@ -10625,10 +10533,10 @@
 # * `vhd_coalesce_poll_interval`
 #  (integer value)
 # Minimum value: 0
-#vhd_coalesce_max_attempts = 20
+#vhd_coalesce_max_attempts=20
 
 # Base path to the storage repository on the XenServer host. (string value)
-#sr_base_path = /var/run/sr-mount
+#sr_base_path=/var/run/sr-mount
 
 #
 # The iSCSI Target Host.
@@ -10640,8 +10548,8 @@
 # Possible values:
 #
 # * Any string that represents hostname/ip of Target.
-#  (unknown value)
-#target_host = <None>
+#  (string value)
+#target_host=<None>
 
 #
 # The iSCSI Target Port.
@@ -10652,7 +10560,7 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#target_port = 3260
+#target_port=3260
 
 # DEPRECATED:
 # Used to enable the remapping of VBD dev.
@@ -10664,7 +10572,7 @@
 # This option provided a workaround for issues in Ubuntu Maverick, which
 # was released in April 2010 and was dropped from support in April 2012.
 # There's no reason to continue supporting this option.
-#remap_vbd_dev = false
+#remap_vbd_dev=false
 
 #
 # Specify prefix to remap VBD dev to (ex. /dev/xvdb -> /dev/sdb).
@@ -10673,7 +10581,7 @@
 #
 # * If `remap_vbd_dev` is set to False this option has no impact.
 #  (string value)
-#remap_vbd_dev_prefix = sd
+#remap_vbd_dev_prefix=sd
 
 #
 # Used to prevent attempts to attach VBDs locally, so Nova can
@@ -10688,7 +10596,7 @@
 # * Swap disks for Windows VMs (will error if attempted)
 # * Nova-based auto_configure_disk (will error if attempted)
 #  (boolean value)
-#independent_compute = false
+#independent_compute=false
 
 #
 # Wait time for instances to go to running state.
@@ -10708,7 +10616,7 @@
 # state.
 #  (integer value)
 # Minimum value: 0
-#running_timeout = 60
+#running_timeout=60
 
 # DEPRECATED:
 # The XenAPI VIF driver using XenServer Network APIs.
@@ -10742,7 +10650,7 @@
 # which is the default configuration for Nova since the 15.0.0 Ocata release. In
 # the future the "use_neutron" configuration option will be used to determine
 # which vif driver to use.
-#vif_driver = nova.virt.xenapi.vif.XenAPIOpenVswitchDriver
+#vif_driver=nova.virt.xenapi.vif.XenAPIOpenVswitchDriver
 
 #
 # Dom0 plugin driver used to handle image uploads.
@@ -10755,7 +10663,7 @@
 # plugin driver. This driver is then called to uplaod images to the
 # GlanceStore.
 #  (string value)
-#image_upload_handler = nova.virt.xenapi.image.glance.GlanceStore
+#image_upload_handler=nova.virt.xenapi.image.glance.GlanceStore
 
 #
 # Number of seconds to wait for SR to settle if the VDI
@@ -10767,7 +10675,7 @@
 # before raising VDI not found exception.
 #  (integer value)
 # Minimum value: 0
-#introduce_vdi_retry_wait = 20
+#introduce_vdi_retry_wait=20
 
 #
 # The name of the integration Bridge that is used with xenapi
@@ -10781,7 +10689,7 @@
 #
 # * Any string that represents a bridge name.
 #  (string value)
-#ovs_integration_bridge = <None>
+#ovs_integration_bridge=<None>
 
 #
 # When adding new host to a pool, this will append a --force flag to the
@@ -10794,16 +10702,17 @@
 # Despite this effort to level differences between CPUs, it is still possible
 # that adding new host will fail, thus option to force join was introduced.
 #  (boolean value)
-#use_join_force = true
+#use_join_force=true
 
 #
 # Publicly visible name for this console host.
 #
 # Possible values:
 #
-# * Current hostname (default) or any string representing hostname.
-#  (string value)
-#console_public_hostname = <current_hostname>
+# * A string representing a valid hostname
+#  (string value)
+# Deprecated group/name - [DEFAULT]/console_public_hostname
+#console_public_hostname=lcy01-22
 
 
 [xvp]
@@ -10818,18 +10727,23 @@
 #
 
 # XVP conf template (string value)
-#console_xvp_conf_template = $pybasedir/nova/console/xvp.conf.template
+# Deprecated group/name - [DEFAULT]/console_xvp_conf_template
+#console_xvp_conf_template=$pybasedir/nova/console/xvp.conf.template
 
 # Generated XVP conf file (string value)
-#console_xvp_conf = /etc/xvp.conf
+# Deprecated group/name - [DEFAULT]/console_xvp_conf
+#console_xvp_conf=/etc/xvp.conf
 
 # XVP master process pid file (string value)
-#console_xvp_pid = /var/run/xvp.pid
+# Deprecated group/name - [DEFAULT]/console_xvp_pid
+#console_xvp_pid=/var/run/xvp.pid
 
 # XVP log file (string value)
-#console_xvp_log = /var/log/xvp.log
+# Deprecated group/name - [DEFAULT]/console_xvp_log
+#console_xvp_log=/var/log/xvp.log
 
 # Port for XVP to multiplex VNC connections on (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#console_xvp_multiplex_port = 5900
+# Deprecated group/name - [DEFAULT]/console_xvp_multiplex_port
+#console_xvp_multiplex_port=5900

2018-05-09 23:24:02,910 [salt.state       ][INFO    ][24025] Completed state [/etc/nova/nova.conf] at time 23:24:02.910696 duration_in_ms=578.392
2018-05-09 23:24:02,911 [salt.state       ][INFO    ][24025] Running state [/etc/nova/api-paste.ini] at time 23:24:02.911274
2018-05-09 23:24:02,911 [salt.state       ][INFO    ][24025] Executing state file.managed for /etc/nova/api-paste.ini
2018-05-09 23:24:02,930 [salt.fileclient  ][INFO    ][24025] Fetching file from saltenv 'base', ** done ** 'nova/files/pike/api-paste.ini.Debian'
2018-05-09 23:24:03,026 [salt.state       ][INFO    ][24025] File changed:
--- 
+++ 
@@ -71,7 +71,6 @@
 
 [app:oscomputeversionapp]
 paste.app_factory = nova.api.openstack.compute.versions:Versions.factory
-
 ##########
 # Shared #
 ##########

2018-05-09 23:24:03,026 [salt.state       ][INFO    ][24025] Completed state [/etc/nova/api-paste.ini] at time 23:24:03.026534 duration_in_ms=115.259
2018-05-09 23:24:03,027 [salt.state       ][INFO    ][24025] Running state [/etc/default/nova-api] at time 23:24:03.027070
2018-05-09 23:24:03,027 [salt.state       ][INFO    ][24025] Executing state file.managed for /etc/default/nova-api
2018-05-09 23:24:03,041 [salt.fileclient  ][INFO    ][24025] Fetching file from saltenv 'base', ** done ** 'nova/files/default'
2018-05-09 23:24:03,044 [salt.state       ][INFO    ][24025] File changed:
New file
2018-05-09 23:24:03,044 [salt.state       ][INFO    ][24025] Completed state [/etc/default/nova-api] at time 23:24:03.044884 duration_in_ms=17.814
2018-05-09 23:24:03,045 [salt.state       ][INFO    ][24025] Running state [/etc/default/nova-consoleauth] at time 23:24:03.045367
2018-05-09 23:24:03,045 [salt.state       ][INFO    ][24025] Executing state file.managed for /etc/default/nova-consoleauth
2018-05-09 23:24:03,057 [salt.state       ][INFO    ][24025] File changed:
New file
2018-05-09 23:24:03,057 [salt.state       ][INFO    ][24025] Completed state [/etc/default/nova-consoleauth] at time 23:24:03.057683 duration_in_ms=12.316
2018-05-09 23:24:03,058 [salt.state       ][INFO    ][24025] Running state [/etc/default/nova-scheduler] at time 23:24:03.058165
2018-05-09 23:24:03,058 [salt.state       ][INFO    ][24025] Executing state file.managed for /etc/default/nova-scheduler
2018-05-09 23:24:03,069 [salt.state       ][INFO    ][24025] File changed:
New file
2018-05-09 23:24:03,070 [salt.state       ][INFO    ][24025] Completed state [/etc/default/nova-scheduler] at time 23:24:03.070036 duration_in_ms=11.87
2018-05-09 23:24:03,070 [salt.state       ][INFO    ][24025] Running state [/etc/default/nova-conductor] at time 23:24:03.070537
2018-05-09 23:24:03,070 [salt.state       ][INFO    ][24025] Executing state file.managed for /etc/default/nova-conductor
2018-05-09 23:24:03,086 [salt.state       ][INFO    ][24025] File changed:
New file
2018-05-09 23:24:03,087 [salt.state       ][INFO    ][24025] Completed state [/etc/default/nova-conductor] at time 23:24:03.087253 duration_in_ms=16.716
2018-05-09 23:24:03,088 [salt.state       ][INFO    ][24025] Running state [/etc/default/nova-novncproxy] at time 23:24:03.088149
2018-05-09 23:24:03,088 [salt.state       ][INFO    ][24025] Executing state file.managed for /etc/default/nova-novncproxy
2018-05-09 23:24:03,104 [salt.state       ][INFO    ][24025] File changed:
New file
2018-05-09 23:24:03,105 [salt.state       ][INFO    ][24025] Completed state [/etc/default/nova-novncproxy] at time 23:24:03.105022 duration_in_ms=16.873
2018-05-09 23:24:03,111 [salt.state       ][INFO    ][24025] Running state [nova_controller_api_db_sync_version_20] at time 23:24:03.111756
2018-05-09 23:24:03,112 [salt.state       ][INFO    ][24025] Executing state novang.api_db_version_present for nova_controller_api_db_sync_version_20
2018-05-09 23:24:03,112 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage api_db version 2>/dev/null' in directory '/root'
2018-05-09 23:24:07,282 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage api_db sync --version 20' in directory '/root'
2018-05-09 23:24:10,169 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232410156502
2018-05-09 23:24:10,190 [salt.minion      ][INFO    ][27507] Starting a new job with PID 27507
2018-05-09 23:24:10,232 [salt.minion      ][INFO    ][27507] Returning information for job: 20180509232410156502
2018-05-09 23:24:12,025 [salt.state       ][INFO    ][24025] {'api_db': 'api_db sync --version 20'}
2018-05-09 23:24:12,025 [salt.state       ][INFO    ][24025] Completed state [nova_controller_api_db_sync_version_20] at time 23:24:12.025491 duration_in_ms=8913.735
2018-05-09 23:24:12,026 [salt.state       ][INFO    ][24025] Running state [nova_controller_db_sync_version_334] at time 23:24:12.026317
2018-05-09 23:24:12,026 [salt.state       ][INFO    ][24025] Executing state novang.db_version_present for nova_controller_db_sync_version_334
2018-05-09 23:24:12,027 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage db version 2>/dev/null' in directory '/root'
2018-05-09 23:24:16,023 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage db sync --version 334' in directory '/root'
2018-05-09 23:24:20,207 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232420191919
2018-05-09 23:24:20,224 [salt.minion      ][INFO    ][27664] Starting a new job with PID 27664
2018-05-09 23:24:20,265 [salt.minion      ][INFO    ][27664] Returning information for job: 20180509232420191919
2018-05-09 23:24:27,677 [salt.state       ][INFO    ][24025] {'db': 'db sync --version 334'}
2018-05-09 23:24:27,678 [salt.state       ][INFO    ][24025] Completed state [nova_controller_db_sync_version_334] at time 23:24:27.678026 duration_in_ms=15651.708
2018-05-09 23:24:27,679 [salt.state       ][INFO    ][24025] Running state [online_data_migrations_for_apidb20_and_db334] at time 23:24:27.679912
2018-05-09 23:24:27,680 [salt.state       ][INFO    ][24025] Executing state novang.online_data_migrations_present for online_data_migrations_for_apidb20_and_db334
2018-05-09 23:24:27,680 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage api_db version 2>/dev/null' in directory '/root'
2018-05-09 23:24:30,242 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232430231703
2018-05-09 23:24:30,266 [salt.minion      ][INFO    ][27797] Starting a new job with PID 27797
2018-05-09 23:24:30,319 [salt.minion      ][INFO    ][27797] Returning information for job: 20180509232430231703
2018-05-09 23:24:31,847 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage db version 2>/dev/null' in directory '/root'
2018-05-09 23:24:35,780 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage db online_data_migrations' in directory '/root'
2018-05-09 23:24:40,015 [salt.state       ][INFO    ][24025] {'online_data_migrations': 'online_data_migrations on api_db version 20 and db version 334'}
2018-05-09 23:24:40,015 [salt.state       ][INFO    ][24025] Completed state [online_data_migrations_for_apidb20_and_db334] at time 23:24:40.015822 duration_in_ms=12335.908
2018-05-09 23:24:40,020 [salt.state       ][INFO    ][24025] Running state [nova-manage db sync] at time 23:24:40.020796
2018-05-09 23:24:40,021 [salt.state       ][INFO    ][24025] Executing state cmd.run for nova-manage db sync
2018-05-09 23:24:40,022 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage db sync' in directory '/root'
2018-05-09 23:24:40,294 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232440278492
2018-05-09 23:24:40,314 [salt.minion      ][INFO    ][27868] Starting a new job with PID 27868
2018-05-09 23:24:40,332 [salt.minion      ][INFO    ][27868] Returning information for job: 20180509232440278492
2018-05-09 23:24:44,906 [salt.state       ][INFO    ][24025] {'pid': 27862, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': 'WARNING: cell0 mapping not found - not syncing cell0.'}
2018-05-09 23:24:44,907 [salt.state       ][INFO    ][24025] Completed state [nova-manage db sync] at time 23:24:44.907328 duration_in_ms=4886.535
2018-05-09 23:24:44,908 [salt.state       ][INFO    ][24025] Running state [nova-manage cell_v2 map_cell0] at time 23:24:44.908884
2018-05-09 23:24:44,909 [salt.state       ][INFO    ][24025] Executing state cmd.run for nova-manage cell_v2 map_cell0
2018-05-09 23:24:44,911 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage cell_v2 map_cell0' in directory '/root'
2018-05-09 23:24:49,111 [salt.state       ][INFO    ][24025] {'pid': 27894, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': ''}
2018-05-09 23:24:49,112 [salt.state       ][INFO    ][24025] Completed state [nova-manage cell_v2 map_cell0] at time 23:24:49.112542 duration_in_ms=4203.657
2018-05-09 23:24:49,115 [salt.state       ][INFO    ][24025] Running state [nova-manage cell_v2 create_cell --name=cell1] at time 23:24:49.114921
2018-05-09 23:24:49,115 [salt.state       ][INFO    ][24025] Executing state cmd.run for nova-manage cell_v2 create_cell --name=cell1
2018-05-09 23:24:49,117 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage cell_v2 list_cells | grep cell1' in directory '/root'
2018-05-09 23:24:50,507 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232450494440
2018-05-09 23:24:50,536 [salt.minion      ][INFO    ][27918] Starting a new job with PID 27918
2018-05-09 23:24:50,555 [salt.minion      ][INFO    ][27918] Returning information for job: 20180509232450494440
2018-05-09 23:24:53,291 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage cell_v2 create_cell --name=cell1' in directory '/root'
2018-05-09 23:24:57,531 [salt.state       ][INFO    ][24025] {'pid': 27924, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': ''}
2018-05-09 23:24:57,533 [salt.state       ][INFO    ][24025] Completed state [nova-manage cell_v2 create_cell --name=cell1] at time 23:24:57.532820 duration_in_ms=8417.9
2018-05-09 23:24:57,534 [salt.state       ][INFO    ][24025] Running state [/etc/systemd/system/nova-placement-api.service] at time 23:24:57.534258
2018-05-09 23:24:57,535 [salt.state       ][INFO    ][24025] Executing state file.symlink for /etc/systemd/system/nova-placement-api.service
2018-05-09 23:24:57,540 [salt.state       ][INFO    ][24025] {'new': '/etc/systemd/system/nova-placement-api.service'}
2018-05-09 23:24:57,541 [salt.state       ][INFO    ][24025] Completed state [/etc/systemd/system/nova-placement-api.service] at time 23:24:57.541337 duration_in_ms=7.079
2018-05-09 23:24:57,544 [salt.state       ][INFO    ][24025] Running state [nova-placement-api] at time 23:24:57.544089
2018-05-09 23:24:57,545 [salt.state       ][INFO    ][24025] Executing state pkg.installed for nova-placement-api
2018-05-09 23:24:57,576 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:24:57,617 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-placement-api'] in directory '/root'
2018-05-09 23:25:00,121 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:25:00,187 [salt.state       ][INFO    ][24025] Made the following changes:
'nova-placement-api' changed from 'absent' to '2:16.1.2-0ubuntu1~cloud0'

2018-05-09 23:25:00,212 [salt.state       ][INFO    ][24025] Loading fresh modules for state activity
2018-05-09 23:25:00,246 [salt.state       ][INFO    ][24025] Completed state [nova-placement-api] at time 23:25:00.246066 duration_in_ms=2701.977
2018-05-09 23:25:00,250 [salt.state       ][INFO    ][24025] Running state [/etc/apache2/sites-available/nova-placement-api.conf] at time 23:25:00.250555
2018-05-09 23:25:00,251 [salt.state       ][INFO    ][24025] Executing state file.managed for /etc/apache2/sites-available/nova-placement-api.conf
2018-05-09 23:25:00,400 [salt.fileclient  ][INFO    ][24025] Fetching file from saltenv 'base', ** done ** 'nova/files/pike/nova-placement-api.conf'
2018-05-09 23:25:00,511 [salt.state       ][INFO    ][24025] File changed:
--- 
+++ 
@@ -1,6 +1,7 @@
-Listen 8778
 
-<VirtualHost *:8778>
+Listen 172.16.10.36:8778
+
+<VirtualHost 172.16.10.36:8778>
     WSGIScriptAlias / /usr/bin/nova-placement-api
     WSGIDaemonProcess nova-placement processes=5 threads=1 user=nova group=nova display-name=%{GROUP}
     WSGIProcessGroup nova-placement
@@ -13,7 +14,7 @@
     </IfVersion>
 
     ErrorLog /var/log/apache2/nova_placement_error.log
-    CustomLog /var/log/apache2/nova_placement_access.log combined
+    CustomLog /var/log/apache2/nova_placement_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 
     <Directory /usr/bin>
         <IfVersion >= 2.4>

2018-05-09 23:25:00,514 [salt.state       ][INFO    ][24025] Completed state [/etc/apache2/sites-available/nova-placement-api.conf] at time 23:25:00.514261 duration_in_ms=263.705
2018-05-09 23:25:00,519 [salt.state       ][INFO    ][24025] Running state [nova-placement-api] at time 23:25:00.519614
2018-05-09 23:25:00,519 [salt.state       ][INFO    ][24025] Executing state apache_site.enabled for nova-placement-api
2018-05-09 23:25:00,520 [salt.state       ][INFO    ][24025] nova-placement-api already enabled.
2018-05-09 23:25:00,520 [salt.state       ][INFO    ][24025] Completed state [nova-placement-api] at time 23:25:00.520480 duration_in_ms=0.866
2018-05-09 23:25:00,522 [salt.state       ][INFO    ][24025] Running state [nova-manage cell_v2 discover_hosts] at time 23:25:00.522755
2018-05-09 23:25:00,523 [salt.state       ][INFO    ][24025] Executing state cmd.run for nova-manage cell_v2 discover_hosts
2018-05-09 23:25:00,527 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage cell_v2 discover_hosts' in directory '/root'
2018-05-09 23:25:00,924 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232500517677
2018-05-09 23:25:00,940 [salt.minion      ][INFO    ][28344] Starting a new job with PID 28344
2018-05-09 23:25:00,958 [salt.minion      ][INFO    ][28344] Returning information for job: 20180509232500517677
2018-05-09 23:25:04,762 [salt.state       ][INFO    ][24025] {'pid': 28333, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': ''}
2018-05-09 23:25:04,762 [salt.state       ][INFO    ][24025] Completed state [nova-manage cell_v2 discover_hosts] at time 23:25:04.762850 duration_in_ms=4240.093
2018-05-09 23:25:04,765 [salt.state       ][INFO    ][24025] Running state [cell1] at time 23:25:04.765443
2018-05-09 23:25:04,765 [salt.state       ][INFO    ][24025] Executing state novang.map_instances for cell1
2018-05-09 23:25:04,766 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage cell_v2 list_cells 2>&- | grep cell1 | tr -d "
" | awk '{print $4}'' in directory '/root'
2018-05-09 23:25:08,912 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage cell_v2 map_instances --cell_uuid 8eb02052-3905-4cdd-8cc2-47619fa1ff52' in directory '/root'
2018-05-09 23:25:10,694 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232510687884
2018-05-09 23:25:10,720 [salt.minion      ][INFO    ][28395] Starting a new job with PID 28395
2018-05-09 23:25:10,738 [salt.minion      ][INFO    ][28395] Returning information for job: 20180509232510687884
2018-05-09 23:25:13,185 [salt.state       ][INFO    ][24025] {'Instances': 'Mapped to cell named cell1'}
2018-05-09 23:25:13,186 [salt.state       ][INFO    ][24025] Completed state [cell1] at time 23:25:13.186358 duration_in_ms=8420.914
2018-05-09 23:25:13,187 [salt.state       ][INFO    ][24025] Running state [nova-manage api_db sync] at time 23:25:13.187412
2018-05-09 23:25:13,187 [salt.state       ][INFO    ][24025] Executing state cmd.run for nova-manage api_db sync
2018-05-09 23:25:13,188 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage api_db sync' in directory '/root'
2018-05-09 23:25:17,774 [salt.state       ][INFO    ][24025] {'pid': 28411, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': ''}
2018-05-09 23:25:17,774 [salt.state       ][INFO    ][24025] Completed state [nova-manage api_db sync] at time 23:25:17.774462 duration_in_ms=4587.049
2018-05-09 23:25:17,775 [salt.state       ][INFO    ][24025] Running state [nova-manage db online_data_migrations] at time 23:25:17.775786
2018-05-09 23:25:17,778 [salt.state       ][INFO    ][24025] Executing state cmd.run for nova-manage db online_data_migrations
2018-05-09 23:25:17,779 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command 'nova-manage db online_data_migrations' in directory '/root'
2018-05-09 23:25:20,899 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232520893886
2018-05-09 23:25:20,919 [salt.minion      ][INFO    ][28444] Starting a new job with PID 28444
2018-05-09 23:25:20,936 [salt.minion      ][INFO    ][28444] Returning information for job: 20180509232520893886
2018-05-09 23:25:22,102 [salt.state       ][INFO    ][24025] {'pid': 28431, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': 'Running batches of 50 until complete\n+---------------------------------------------+--------------+-----------+\n|                  Migration                  | Total Needed | Completed |\n+---------------------------------------------+--------------+-----------+\n| delete_build_requests_with_no_instance_uuid |      0       |     0     |\n|    migrate_aggregate_reset_autoincrement    |      0       |     0     |\n|              migrate_aggregates             |      0       |     0     |\n|      migrate_flavor_reset_autoincrement     |      0       |     0     |\n|               migrate_flavors               |      0       |     0     |\n|      migrate_instance_groups_to_api_db      |      0       |     0     |\n|          migrate_instance_keypairs          |      0       |     0     |\n|      migrate_instances_add_request_spec     |      0       |     0     |\n|          migrate_keypairs_to_api_db         |      0       |     0     |\n|       migrate_quota_classes_to_api_db       |      0       |     0     |\n|        migrate_quota_limits_to_api_db       |      0       |     0     |\n|     service_uuids_online_data_migration     |      0       |     0     |\n+---------------------------------------------+--------------+-----------+'}
2018-05-09 23:25:22,103 [salt.state       ][INFO    ][24025] Completed state [nova-manage db online_data_migrations] at time 23:25:22.103422 duration_in_ms=4327.636
2018-05-09 23:25:22,532 [salt.state       ][INFO    ][24025] Running state [apache2] at time 23:25:22.532321
2018-05-09 23:25:22,533 [salt.state       ][INFO    ][24025] Executing state service.running for apache2
2018-05-09 23:25:22,534 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-05-09 23:25:22,561 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:25:22,586 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:25:22,614 [salt.state       ][INFO    ][24025] The service apache2 is already running
2018-05-09 23:25:22,615 [salt.state       ][INFO    ][24025] Completed state [apache2] at time 23:25:22.615222 duration_in_ms=82.901
2018-05-09 23:25:22,615 [salt.state       ][INFO    ][24025] Running state [apache2] at time 23:25:22.615540
2018-05-09 23:25:22,615 [salt.state       ][INFO    ][24025] Executing state service.mod_watch for apache2
2018-05-09 23:25:22,616 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:25:22,638 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:25:22,666 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-05-09 23:25:24,944 [salt.state       ][INFO    ][24025] {'apache2': True}
2018-05-09 23:25:24,945 [salt.state       ][INFO    ][24025] Completed state [apache2] at time 23:25:24.945086 duration_in_ms=2329.543
2018-05-09 23:25:24,952 [salt.state       ][INFO    ][24025] Running state [nova-api] at time 23:25:24.952465
2018-05-09 23:25:24,953 [salt.state       ][INFO    ][24025] Executing state service.running for nova-api
2018-05-09 23:25:24,954 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'status', 'nova-api.service', '-n', '0'] in directory '/root'
2018-05-09 23:25:24,971 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'nova-api.service'] in directory '/root'
2018-05-09 23:25:24,986 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-api.service'] in directory '/root'
2018-05-09 23:25:25,002 [salt.state       ][INFO    ][24025] The service nova-api is already running
2018-05-09 23:25:25,003 [salt.state       ][INFO    ][24025] Completed state [nova-api] at time 23:25:25.002934 duration_in_ms=50.469
2018-05-09 23:25:25,003 [salt.state       ][INFO    ][24025] Running state [nova-api] at time 23:25:25.003207
2018-05-09 23:25:25,003 [salt.state       ][INFO    ][24025] Executing state service.mod_watch for nova-api
2018-05-09 23:25:25,004 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'nova-api.service'] in directory '/root'
2018-05-09 23:25:25,022 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-api.service'] in directory '/root'
2018-05-09 23:25:25,043 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-api.service'] in directory '/root'
2018-05-09 23:25:25,281 [salt.state       ][INFO    ][24025] {'nova-api': True}
2018-05-09 23:25:25,281 [salt.state       ][INFO    ][24025] Completed state [nova-api] at time 23:25:25.281688 duration_in_ms=278.48
2018-05-09 23:25:25,283 [salt.state       ][INFO    ][24025] Running state [nova-consoleauth] at time 23:25:25.283708
2018-05-09 23:25:25,284 [salt.state       ][INFO    ][24025] Executing state service.running for nova-consoleauth
2018-05-09 23:25:25,284 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'status', 'nova-consoleauth.service', '-n', '0'] in directory '/root'
2018-05-09 23:25:25,307 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'nova-consoleauth.service'] in directory '/root'
2018-05-09 23:25:25,323 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2018-05-09 23:25:25,340 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2018-05-09 23:25:25,353 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'nova-consoleauth.service'] in directory '/root'
2018-05-09 23:25:25,388 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'nova-consoleauth.service'] in directory '/root'
2018-05-09 23:25:25,406 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2018-05-09 23:25:25,422 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2018-05-09 23:25:25,435 [salt.state       ][INFO    ][24025] {'nova-consoleauth': True}
2018-05-09 23:25:25,435 [salt.state       ][INFO    ][24025] Completed state [nova-consoleauth] at time 23:25:25.435611 duration_in_ms=151.902
2018-05-09 23:25:25,437 [salt.state       ][INFO    ][24025] Running state [nova-scheduler] at time 23:25:25.437938
2018-05-09 23:25:25,438 [salt.state       ][INFO    ][24025] Executing state service.running for nova-scheduler
2018-05-09 23:25:25,439 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'status', 'nova-scheduler.service', '-n', '0'] in directory '/root'
2018-05-09 23:25:25,454 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'nova-scheduler.service'] in directory '/root'
2018-05-09 23:25:25,469 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-scheduler.service'] in directory '/root'
2018-05-09 23:25:25,484 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-scheduler.service'] in directory '/root'
2018-05-09 23:25:25,499 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'nova-scheduler.service'] in directory '/root'
2018-05-09 23:25:25,530 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'nova-scheduler.service'] in directory '/root'
2018-05-09 23:25:25,544 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-scheduler.service'] in directory '/root'
2018-05-09 23:25:25,560 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-scheduler.service'] in directory '/root'
2018-05-09 23:25:25,574 [salt.state       ][INFO    ][24025] {'nova-scheduler': True}
2018-05-09 23:25:25,574 [salt.state       ][INFO    ][24025] Completed state [nova-scheduler] at time 23:25:25.574515 duration_in_ms=136.576
2018-05-09 23:25:25,576 [salt.state       ][INFO    ][24025] Running state [nova-conductor] at time 23:25:25.576409
2018-05-09 23:25:25,576 [salt.state       ][INFO    ][24025] Executing state service.running for nova-conductor
2018-05-09 23:25:25,577 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'status', 'nova-conductor.service', '-n', '0'] in directory '/root'
2018-05-09 23:25:25,596 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'nova-conductor.service'] in directory '/root'
2018-05-09 23:25:25,608 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-conductor.service'] in directory '/root'
2018-05-09 23:25:25,619 [salt.state       ][INFO    ][24025] The service nova-conductor is already running
2018-05-09 23:25:25,620 [salt.state       ][INFO    ][24025] Completed state [nova-conductor] at time 23:25:25.619968 duration_in_ms=43.559
2018-05-09 23:25:25,620 [salt.state       ][INFO    ][24025] Running state [nova-conductor] at time 23:25:25.620217
2018-05-09 23:25:25,620 [salt.state       ][INFO    ][24025] Executing state service.mod_watch for nova-conductor
2018-05-09 23:25:25,621 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'nova-conductor.service'] in directory '/root'
2018-05-09 23:25:25,633 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-conductor.service'] in directory '/root'
2018-05-09 23:25:25,645 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-conductor.service'] in directory '/root'
2018-05-09 23:25:26,003 [salt.state       ][INFO    ][24025] {'nova-conductor': True}
2018-05-09 23:25:26,004 [salt.state       ][INFO    ][24025] Completed state [nova-conductor] at time 23:25:26.004236 duration_in_ms=384.017
2018-05-09 23:25:26,009 [salt.state       ][INFO    ][24025] Running state [nova-novncproxy] at time 23:25:26.008994
2018-05-09 23:25:26,009 [salt.state       ][INFO    ][24025] Executing state service.running for nova-novncproxy
2018-05-09 23:25:26,012 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'status', 'nova-novncproxy.service', '-n', '0'] in directory '/root'
2018-05-09 23:25:26,032 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'nova-novncproxy.service'] in directory '/root'
2018-05-09 23:25:26,051 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-novncproxy.service'] in directory '/root'
2018-05-09 23:25:26,084 [salt.state       ][INFO    ][24025] The service nova-novncproxy is already running
2018-05-09 23:25:26,084 [salt.state       ][INFO    ][24025] Completed state [nova-novncproxy] at time 23:25:26.084368 duration_in_ms=75.374
2018-05-09 23:25:26,084 [salt.state       ][INFO    ][24025] Running state [nova-novncproxy] at time 23:25:26.084627
2018-05-09 23:25:26,084 [salt.state       ][INFO    ][24025] Executing state service.mod_watch for nova-novncproxy
2018-05-09 23:25:26,085 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-active', 'nova-novncproxy.service'] in directory '/root'
2018-05-09 23:25:26,107 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemctl', 'is-enabled', 'nova-novncproxy.service'] in directory '/root'
2018-05-09 23:25:26,127 [salt.loaded.int.module.cmdmod][INFO    ][24025] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-novncproxy.service'] in directory '/root'
2018-05-09 23:25:26,302 [salt.state       ][INFO    ][24025] {'nova-novncproxy': True}
2018-05-09 23:25:26,303 [salt.state       ][INFO    ][24025] Completed state [nova-novncproxy] at time 23:25:26.303259 duration_in_ms=218.631
2018-05-09 23:25:26,307 [salt.minion      ][INFO    ][24025] Returning information for job: 20180509232319412926
2018-05-09 23:25:27,072 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232527066176
2018-05-09 23:25:27,087 [salt.minion      ][INFO    ][29061] Starting a new job with PID 29061
2018-05-09 23:25:29,506 [salt.state       ][INFO    ][29061] Loading fresh modules for state activity
2018-05-09 23:25:31,542 [salt.state       ][INFO    ][29061] Running state [debconf-utils] at time 23:25:31.542110
2018-05-09 23:25:31,542 [salt.state       ][INFO    ][29061] Executing state pkg.installed for debconf-utils
2018-05-09 23:25:31,543 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:25:31,950 [salt.state       ][INFO    ][29061] All specified packages are already installed
2018-05-09 23:25:31,951 [salt.state       ][INFO    ][29061] Completed state [debconf-utils] at time 23:25:31.951278 duration_in_ms=409.167
2018-05-09 23:25:31,954 [salt.state       ][INFO    ][29061] Running state [nova-consoleproxy] at time 23:25:31.954309
2018-05-09 23:25:31,954 [salt.state       ][INFO    ][29061] Executing state debconf.set for nova-consoleproxy
2018-05-09 23:25:31,955 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'debconf-get-selections' in directory '/root'
2018-05-09 23:25:32,176 [salt.state       ][INFO    ][29061] All specified answers are already set
2018-05-09 23:25:32,177 [salt.state       ][INFO    ][29061] Completed state [nova-consoleproxy] at time 23:25:32.177290 duration_in_ms=222.981
2018-05-09 23:25:32,178 [salt.state       ][INFO    ][29061] Running state [nova-api] at time 23:25:32.178719
2018-05-09 23:25:32,179 [salt.state       ][INFO    ][29061] Executing state pkg.installed for nova-api
2018-05-09 23:25:32,186 [salt.state       ][INFO    ][29061] All specified packages are already installed
2018-05-09 23:25:32,187 [salt.state       ][INFO    ][29061] Completed state [nova-api] at time 23:25:32.187334 duration_in_ms=8.615
2018-05-09 23:25:32,188 [salt.state       ][INFO    ][29061] Running state [nova-conductor] at time 23:25:32.188239
2018-05-09 23:25:32,188 [salt.state       ][INFO    ][29061] Executing state pkg.installed for nova-conductor
2018-05-09 23:25:32,195 [salt.state       ][INFO    ][29061] All specified packages are already installed
2018-05-09 23:25:32,196 [salt.state       ][INFO    ][29061] Completed state [nova-conductor] at time 23:25:32.196186 duration_in_ms=7.947
2018-05-09 23:25:32,196 [salt.state       ][INFO    ][29061] Running state [nova-consoleauth] at time 23:25:32.196792
2018-05-09 23:25:32,197 [salt.state       ][INFO    ][29061] Executing state pkg.installed for nova-consoleauth
2018-05-09 23:25:32,205 [salt.state       ][INFO    ][29061] All specified packages are already installed
2018-05-09 23:25:32,206 [salt.state       ][INFO    ][29061] Completed state [nova-consoleauth] at time 23:25:32.205985 duration_in_ms=9.193
2018-05-09 23:25:32,206 [salt.state       ][INFO    ][29061] Running state [nova-novncproxy] at time 23:25:32.206616
2018-05-09 23:25:32,207 [salt.state       ][INFO    ][29061] Executing state pkg.installed for nova-novncproxy
2018-05-09 23:25:32,214 [salt.state       ][INFO    ][29061] All specified packages are already installed
2018-05-09 23:25:32,214 [salt.state       ][INFO    ][29061] Completed state [nova-novncproxy] at time 23:25:32.214737 duration_in_ms=8.122
2018-05-09 23:25:32,215 [salt.state       ][INFO    ][29061] Running state [nova-scheduler] at time 23:25:32.215351
2018-05-09 23:25:32,215 [salt.state       ][INFO    ][29061] Executing state pkg.installed for nova-scheduler
2018-05-09 23:25:32,223 [salt.state       ][INFO    ][29061] All specified packages are already installed
2018-05-09 23:25:32,223 [salt.state       ][INFO    ][29061] Completed state [nova-scheduler] at time 23:25:32.223609 duration_in_ms=8.258
2018-05-09 23:25:32,224 [salt.state       ][INFO    ][29061] Running state [python-novaclient] at time 23:25:32.224211
2018-05-09 23:25:32,224 [salt.state       ][INFO    ][29061] Executing state pkg.installed for python-novaclient
2018-05-09 23:25:32,232 [salt.state       ][INFO    ][29061] All specified packages are already installed
2018-05-09 23:25:32,232 [salt.state       ][INFO    ][29061] Completed state [python-novaclient] at time 23:25:32.232656 duration_in_ms=8.444
2018-05-09 23:25:32,235 [salt.state       ][INFO    ][29061] Running state [/etc/nova/nova.conf] at time 23:25:32.235869
2018-05-09 23:25:32,236 [salt.state       ][INFO    ][29061] Executing state file.managed for /etc/nova/nova.conf
2018-05-09 23:25:32,626 [salt.state       ][INFO    ][29061] File /etc/nova/nova.conf is in the correct state
2018-05-09 23:25:32,626 [salt.state       ][INFO    ][29061] Completed state [/etc/nova/nova.conf] at time 23:25:32.626893 duration_in_ms=391.023
2018-05-09 23:25:32,627 [salt.state       ][INFO    ][29061] Running state [/etc/nova/api-paste.ini] at time 23:25:32.627409
2018-05-09 23:25:32,627 [salt.state       ][INFO    ][29061] Executing state file.managed for /etc/nova/api-paste.ini
2018-05-09 23:25:32,747 [salt.state       ][INFO    ][29061] File /etc/nova/api-paste.ini is in the correct state
2018-05-09 23:25:32,747 [salt.state       ][INFO    ][29061] Completed state [/etc/nova/api-paste.ini] at time 23:25:32.747565 duration_in_ms=120.155
2018-05-09 23:25:32,748 [salt.state       ][INFO    ][29061] Running state [/etc/default/nova-api] at time 23:25:32.748037
2018-05-09 23:25:32,748 [salt.state       ][INFO    ][29061] Executing state file.managed for /etc/default/nova-api
2018-05-09 23:25:32,767 [salt.state       ][INFO    ][29061] File /etc/default/nova-api is in the correct state
2018-05-09 23:25:32,768 [salt.state       ][INFO    ][29061] Completed state [/etc/default/nova-api] at time 23:25:32.767974 duration_in_ms=19.936
2018-05-09 23:25:32,768 [salt.state       ][INFO    ][29061] Running state [/etc/default/nova-consoleauth] at time 23:25:32.768636
2018-05-09 23:25:32,768 [salt.state       ][INFO    ][29061] Executing state file.managed for /etc/default/nova-consoleauth
2018-05-09 23:25:32,786 [salt.state       ][INFO    ][29061] File /etc/default/nova-consoleauth is in the correct state
2018-05-09 23:25:32,786 [salt.state       ][INFO    ][29061] Completed state [/etc/default/nova-consoleauth] at time 23:25:32.786922 duration_in_ms=18.286
2018-05-09 23:25:32,788 [salt.state       ][INFO    ][29061] Running state [/etc/default/nova-scheduler] at time 23:25:32.787977
2018-05-09 23:25:32,788 [salt.state       ][INFO    ][29061] Executing state file.managed for /etc/default/nova-scheduler
2018-05-09 23:25:32,805 [salt.state       ][INFO    ][29061] File /etc/default/nova-scheduler is in the correct state
2018-05-09 23:25:32,805 [salt.state       ][INFO    ][29061] Completed state [/etc/default/nova-scheduler] at time 23:25:32.805209 duration_in_ms=17.231
2018-05-09 23:25:32,806 [salt.state       ][INFO    ][29061] Running state [/etc/default/nova-conductor] at time 23:25:32.806142
2018-05-09 23:25:32,806 [salt.state       ][INFO    ][29061] Executing state file.managed for /etc/default/nova-conductor
2018-05-09 23:25:32,823 [salt.state       ][INFO    ][29061] File /etc/default/nova-conductor is in the correct state
2018-05-09 23:25:32,824 [salt.state       ][INFO    ][29061] Completed state [/etc/default/nova-conductor] at time 23:25:32.823974 duration_in_ms=17.831
2018-05-09 23:25:32,824 [salt.state       ][INFO    ][29061] Running state [/etc/default/nova-novncproxy] at time 23:25:32.824631
2018-05-09 23:25:32,824 [salt.state       ][INFO    ][29061] Executing state file.managed for /etc/default/nova-novncproxy
2018-05-09 23:25:32,842 [salt.state       ][INFO    ][29061] File /etc/default/nova-novncproxy is in the correct state
2018-05-09 23:25:32,842 [salt.state       ][INFO    ][29061] Completed state [/etc/default/nova-novncproxy] at time 23:25:32.842552 duration_in_ms=17.921
2018-05-09 23:25:32,844 [salt.state       ][INFO    ][29061] Running state [nova_controller_api_db_sync_version_20] at time 23:25:32.844336
2018-05-09 23:25:32,844 [salt.state       ][INFO    ][29061] Executing state novang.api_db_version_present for nova_controller_api_db_sync_version_20
2018-05-09 23:25:32,846 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage api_db version 2>/dev/null' in directory '/root'
2018-05-09 23:25:36,781 [salt.state       ][INFO    ][29061] Current Api_db version is not < than "20".
2018-05-09 23:25:36,782 [salt.state       ][INFO    ][29061] Completed state [nova_controller_api_db_sync_version_20] at time 23:25:36.782085 duration_in_ms=3937.749
2018-05-09 23:25:36,783 [salt.state       ][INFO    ][29061] Running state [nova_controller_db_sync_version_334] at time 23:25:36.783033
2018-05-09 23:25:36,783 [salt.state       ][INFO    ][29061] Executing state novang.db_version_present for nova_controller_db_sync_version_334
2018-05-09 23:25:36,784 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage db version 2>/dev/null' in directory '/root'
2018-05-09 23:25:37,165 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232537156135
2018-05-09 23:25:37,180 [salt.minion      ][INFO    ][29125] Starting a new job with PID 29125
2018-05-09 23:25:37,200 [salt.minion      ][INFO    ][29125] Returning information for job: 20180509232537156135
2018-05-09 23:25:40,741 [salt.state       ][INFO    ][29061] Current db version is not < than "334".
2018-05-09 23:25:40,742 [salt.state       ][INFO    ][29061] Completed state [nova_controller_db_sync_version_334] at time 23:25:40.742471 duration_in_ms=3959.438
2018-05-09 23:25:40,745 [salt.state       ][INFO    ][29061] Running state [online_data_migrations_for_apidb20_and_db334] at time 23:25:40.745348
2018-05-09 23:25:40,745 [salt.state       ][INFO    ][29061] Executing state novang.online_data_migrations_present for online_data_migrations_for_apidb20_and_db334
2018-05-09 23:25:40,747 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage api_db version 2>/dev/null' in directory '/root'
2018-05-09 23:25:44,592 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage db version 2>/dev/null' in directory '/root'
2018-05-09 23:25:47,375 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232547370239
2018-05-09 23:25:47,393 [salt.minion      ][INFO    ][29155] Starting a new job with PID 29155
2018-05-09 23:25:47,412 [salt.minion      ][INFO    ][29155] Returning information for job: 20180509232547370239
2018-05-09 23:25:48,569 [salt.state       ][INFO    ][29061] Current api_db version != 20 a db version != 334.
2018-05-09 23:25:48,569 [salt.state       ][INFO    ][29061] Completed state [online_data_migrations_for_apidb20_and_db334] at time 23:25:48.569401 duration_in_ms=7824.053
2018-05-09 23:25:48,572 [salt.state       ][INFO    ][29061] Running state [nova-manage db sync] at time 23:25:48.572929
2018-05-09 23:25:48,573 [salt.state       ][INFO    ][29061] Executing state cmd.run for nova-manage db sync
2018-05-09 23:25:48,574 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage db sync' in directory '/root'
2018-05-09 23:25:57,575 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232557569716
2018-05-09 23:25:57,596 [salt.minion      ][INFO    ][29179] Starting a new job with PID 29179
2018-05-09 23:25:57,619 [salt.minion      ][INFO    ][29179] Returning information for job: 20180509232557569716
2018-05-09 23:26:02,746 [salt.state       ][INFO    ][29061] {'pid': 29163, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)\n/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1831, u"Duplicate index \'block_device_mapping_instance_uuid_virtual_name_device_name_idx\' defined on the table \'nova_cell0.block_device_mapping\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)\n/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1831, u"Duplicate index \'uniq_instances0uuid\' defined on the table \'nova_cell0.instances\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)', 'stdout': ''}
2018-05-09 23:26:02,747 [salt.state       ][INFO    ][29061] Completed state [nova-manage db sync] at time 23:26:02.747241 duration_in_ms=14174.31
2018-05-09 23:26:02,748 [salt.state       ][INFO    ][29061] Running state [nova-manage cell_v2 map_cell0] at time 23:26:02.748667
2018-05-09 23:26:02,749 [salt.state       ][INFO    ][29061] Executing state cmd.run for nova-manage cell_v2 map_cell0
2018-05-09 23:26:02,750 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage cell_v2 map_cell0' in directory '/root'
2018-05-09 23:26:06,976 [salt.state       ][INFO    ][29061] {'pid': 29182, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': 'Cell0 is already setup'}
2018-05-09 23:26:06,978 [salt.state       ][INFO    ][29061] Completed state [nova-manage cell_v2 map_cell0] at time 23:26:06.977946 duration_in_ms=4229.277
2018-05-09 23:26:06,980 [salt.state       ][INFO    ][29061] Running state [nova-manage cell_v2 create_cell --name=cell1] at time 23:26:06.980126
2018-05-09 23:26:06,980 [salt.state       ][INFO    ][29061] Executing state cmd.run for nova-manage cell_v2 create_cell --name=cell1
2018-05-09 23:26:06,982 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage cell_v2 list_cells | grep cell1' in directory '/root'
2018-05-09 23:26:07,789 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232607777276
2018-05-09 23:26:07,811 [salt.minion      ][INFO    ][29211] Starting a new job with PID 29211
2018-05-09 23:26:07,832 [salt.minion      ][INFO    ][29211] Returning information for job: 20180509232607777276
2018-05-09 23:26:11,317 [salt.state       ][INFO    ][29061] unless execution succeeded
2018-05-09 23:26:11,317 [salt.state       ][INFO    ][29061] Completed state [nova-manage cell_v2 create_cell --name=cell1] at time 23:26:11.317676 duration_in_ms=4337.55
2018-05-09 23:26:11,318 [salt.state       ][INFO    ][29061] Running state [/etc/systemd/system/nova-placement-api.service] at time 23:26:11.318322
2018-05-09 23:26:11,319 [salt.state       ][INFO    ][29061] Executing state file.symlink for /etc/systemd/system/nova-placement-api.service
2018-05-09 23:26:11,322 [salt.state       ][INFO    ][29061] Symlink /etc/systemd/system/nova-placement-api.service is present and owned by root:root
2018-05-09 23:26:11,322 [salt.state       ][INFO    ][29061] Completed state [/etc/systemd/system/nova-placement-api.service] at time 23:26:11.322417 duration_in_ms=4.094
2018-05-09 23:26:11,323 [salt.state       ][INFO    ][29061] Running state [nova-placement-api] at time 23:26:11.323526
2018-05-09 23:26:11,324 [salt.state       ][INFO    ][29061] Executing state pkg.installed for nova-placement-api
2018-05-09 23:26:11,335 [salt.state       ][INFO    ][29061] All specified packages are already installed
2018-05-09 23:26:11,335 [salt.state       ][INFO    ][29061] Completed state [nova-placement-api] at time 23:26:11.335692 duration_in_ms=12.166
2018-05-09 23:26:11,336 [salt.state       ][INFO    ][29061] Running state [/etc/apache2/sites-available/nova-placement-api.conf] at time 23:26:11.336818
2018-05-09 23:26:11,337 [salt.state       ][INFO    ][29061] Executing state file.managed for /etc/apache2/sites-available/nova-placement-api.conf
2018-05-09 23:26:11,468 [salt.state       ][INFO    ][29061] File /etc/apache2/sites-available/nova-placement-api.conf is in the correct state
2018-05-09 23:26:11,468 [salt.state       ][INFO    ][29061] Completed state [/etc/apache2/sites-available/nova-placement-api.conf] at time 23:26:11.468680 duration_in_ms=131.861
2018-05-09 23:26:11,469 [salt.state       ][INFO    ][29061] Running state [nova-placement-api] at time 23:26:11.469853
2018-05-09 23:26:11,470 [salt.state       ][INFO    ][29061] Executing state apache_site.enabled for nova-placement-api
2018-05-09 23:26:11,471 [salt.state       ][INFO    ][29061] nova-placement-api already enabled.
2018-05-09 23:26:11,471 [salt.state       ][INFO    ][29061] Completed state [nova-placement-api] at time 23:26:11.471930 duration_in_ms=2.077
2018-05-09 23:26:11,473 [salt.state       ][INFO    ][29061] Running state [nova-manage cell_v2 discover_hosts] at time 23:26:11.473347
2018-05-09 23:26:11,473 [salt.state       ][INFO    ][29061] Executing state cmd.run for nova-manage cell_v2 discover_hosts
2018-05-09 23:26:11,474 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage cell_v2 discover_hosts' in directory '/root'
2018-05-09 23:26:15,736 [salt.state       ][INFO    ][29061] {'pid': 29216, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': ''}
2018-05-09 23:26:15,737 [salt.state       ][INFO    ][29061] Completed state [nova-manage cell_v2 discover_hosts] at time 23:26:15.737664 duration_in_ms=4264.315
2018-05-09 23:26:15,740 [salt.state       ][INFO    ][29061] Running state [cell1] at time 23:26:15.740767
2018-05-09 23:26:15,741 [salt.state       ][INFO    ][29061] Executing state novang.map_instances for cell1
2018-05-09 23:26:15,743 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage cell_v2 list_cells 2>&- | grep cell1 | tr -d "
" | awk '{print $4}'' in directory '/root'
2018-05-09 23:26:18,016 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232618004515
2018-05-09 23:26:18,038 [salt.minion      ][INFO    ][29237] Starting a new job with PID 29237
2018-05-09 23:26:18,060 [salt.minion      ][INFO    ][29237] Returning information for job: 20180509232618004515
2018-05-09 23:26:20,127 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage cell_v2 map_instances --cell_uuid 8eb02052-3905-4cdd-8cc2-47619fa1ff52' in directory '/root'
2018-05-09 23:26:24,401 [salt.state       ][INFO    ][29061] {'Instances': 'Mapped to cell named cell1'}
2018-05-09 23:26:24,402 [salt.state       ][INFO    ][29061] Completed state [cell1] at time 23:26:24.401918 duration_in_ms=8661.15
2018-05-09 23:26:24,403 [salt.state       ][INFO    ][29061] Running state [nova-manage api_db sync] at time 23:26:24.403624
2018-05-09 23:26:24,404 [salt.state       ][INFO    ][29061] Executing state cmd.run for nova-manage api_db sync
2018-05-09 23:26:24,405 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage api_db sync' in directory '/root'
2018-05-09 23:26:28,232 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232628222026
2018-05-09 23:26:28,253 [salt.minion      ][INFO    ][29263] Starting a new job with PID 29263
2018-05-09 23:26:28,273 [salt.minion      ][INFO    ][29263] Returning information for job: 20180509232628222026
2018-05-09 23:26:28,328 [salt.state       ][INFO    ][29061] {'pid': 29252, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': ''}
2018-05-09 23:26:28,329 [salt.state       ][INFO    ][29061] Completed state [nova-manage api_db sync] at time 23:26:28.329532 duration_in_ms=3925.908
2018-05-09 23:26:28,330 [salt.state       ][INFO    ][29061] Running state [nova-manage db online_data_migrations] at time 23:26:28.330612
2018-05-09 23:26:28,331 [salt.state       ][INFO    ][29061] Executing state cmd.run for nova-manage db online_data_migrations
2018-05-09 23:26:28,332 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command 'nova-manage db online_data_migrations' in directory '/root'
2018-05-09 23:26:32,679 [salt.state       ][INFO    ][29061] {'pid': 29266, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': 'Running batches of 50 until complete\n+---------------------------------------------+--------------+-----------+\n|                  Migration                  | Total Needed | Completed |\n+---------------------------------------------+--------------+-----------+\n| delete_build_requests_with_no_instance_uuid |      0       |     0     |\n|    migrate_aggregate_reset_autoincrement    |      0       |     0     |\n|              migrate_aggregates             |      0       |     0     |\n|      migrate_flavor_reset_autoincrement     |      0       |     0     |\n|               migrate_flavors               |      0       |     0     |\n|      migrate_instance_groups_to_api_db      |      0       |     0     |\n|          migrate_instance_keypairs          |      0       |     0     |\n|      migrate_instances_add_request_spec     |      0       |     0     |\n|          migrate_keypairs_to_api_db         |      0       |     0     |\n|       migrate_quota_classes_to_api_db       |      0       |     0     |\n|        migrate_quota_limits_to_api_db       |      0       |     0     |\n|     service_uuids_online_data_migration     |      0       |     0     |\n+---------------------------------------------+--------------+-----------+'}
2018-05-09 23:26:32,680 [salt.state       ][INFO    ][29061] Completed state [nova-manage db online_data_migrations] at time 23:26:32.680087 duration_in_ms=4349.472
2018-05-09 23:26:32,685 [salt.state       ][INFO    ][29061] Running state [apache2] at time 23:26:32.684999
2018-05-09 23:26:32,685 [salt.state       ][INFO    ][29061] Executing state service.running for apache2
2018-05-09 23:26:32,687 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-05-09 23:26:32,734 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:26:32,752 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:26:32,780 [salt.state       ][INFO    ][29061] The service apache2 is already running
2018-05-09 23:26:32,781 [salt.state       ][INFO    ][29061] Completed state [apache2] at time 23:26:32.781275 duration_in_ms=96.276
2018-05-09 23:26:32,786 [salt.state       ][INFO    ][29061] Running state [nova-api] at time 23:26:32.786287
2018-05-09 23:26:32,787 [salt.state       ][INFO    ][29061] Executing state service.running for nova-api
2018-05-09 23:26:32,788 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'status', 'nova-api.service', '-n', '0'] in directory '/root'
2018-05-09 23:26:32,813 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-active', 'nova-api.service'] in directory '/root'
2018-05-09 23:26:32,838 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-enabled', 'nova-api.service'] in directory '/root'
2018-05-09 23:26:32,861 [salt.state       ][INFO    ][29061] The service nova-api is already running
2018-05-09 23:26:32,863 [salt.state       ][INFO    ][29061] Completed state [nova-api] at time 23:26:32.862975 duration_in_ms=76.685
2018-05-09 23:26:32,867 [salt.state       ][INFO    ][29061] Running state [nova-consoleauth] at time 23:26:32.867452
2018-05-09 23:26:32,868 [salt.state       ][INFO    ][29061] Executing state service.running for nova-consoleauth
2018-05-09 23:26:32,869 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'status', 'nova-consoleauth.service', '-n', '0'] in directory '/root'
2018-05-09 23:26:32,891 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-active', 'nova-consoleauth.service'] in directory '/root'
2018-05-09 23:26:32,912 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2018-05-09 23:26:32,935 [salt.state       ][INFO    ][29061] The service nova-consoleauth is already running
2018-05-09 23:26:32,936 [salt.state       ][INFO    ][29061] Completed state [nova-consoleauth] at time 23:26:32.936212 duration_in_ms=68.758
2018-05-09 23:26:32,940 [salt.state       ][INFO    ][29061] Running state [nova-scheduler] at time 23:26:32.940346
2018-05-09 23:26:32,941 [salt.state       ][INFO    ][29061] Executing state service.running for nova-scheduler
2018-05-09 23:26:32,942 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'status', 'nova-scheduler.service', '-n', '0'] in directory '/root'
2018-05-09 23:26:32,966 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-active', 'nova-scheduler.service'] in directory '/root'
2018-05-09 23:26:32,988 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-enabled', 'nova-scheduler.service'] in directory '/root'
2018-05-09 23:26:33,008 [salt.state       ][INFO    ][29061] The service nova-scheduler is already running
2018-05-09 23:26:33,009 [salt.state       ][INFO    ][29061] Completed state [nova-scheduler] at time 23:26:33.009587 duration_in_ms=69.24
2018-05-09 23:26:33,014 [salt.state       ][INFO    ][29061] Running state [nova-conductor] at time 23:26:33.014628
2018-05-09 23:26:33,015 [salt.state       ][INFO    ][29061] Executing state service.running for nova-conductor
2018-05-09 23:26:33,017 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'status', 'nova-conductor.service', '-n', '0'] in directory '/root'
2018-05-09 23:26:33,042 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-active', 'nova-conductor.service'] in directory '/root'
2018-05-09 23:26:33,065 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-enabled', 'nova-conductor.service'] in directory '/root'
2018-05-09 23:26:33,089 [salt.state       ][INFO    ][29061] The service nova-conductor is already running
2018-05-09 23:26:33,090 [salt.state       ][INFO    ][29061] Completed state [nova-conductor] at time 23:26:33.090097 duration_in_ms=75.466
2018-05-09 23:26:33,095 [salt.state       ][INFO    ][29061] Running state [nova-novncproxy] at time 23:26:33.095242
2018-05-09 23:26:33,096 [salt.state       ][INFO    ][29061] Executing state service.running for nova-novncproxy
2018-05-09 23:26:33,097 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'status', 'nova-novncproxy.service', '-n', '0'] in directory '/root'
2018-05-09 23:26:33,121 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-active', 'nova-novncproxy.service'] in directory '/root'
2018-05-09 23:26:33,141 [salt.loaded.int.module.cmdmod][INFO    ][29061] Executing command ['systemctl', 'is-enabled', 'nova-novncproxy.service'] in directory '/root'
2018-05-09 23:26:33,163 [salt.state       ][INFO    ][29061] The service nova-novncproxy is already running
2018-05-09 23:26:33,164 [salt.state       ][INFO    ][29061] Completed state [nova-novncproxy] at time 23:26:33.164074 duration_in_ms=68.83
2018-05-09 23:26:33,169 [salt.minion      ][INFO    ][29061] Returning information for job: 20180509232527066176
2018-05-09 23:26:33,907 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232633893973
2018-05-09 23:26:33,927 [salt.minion      ][INFO    ][29299] Starting a new job with PID 29299
2018-05-09 23:26:36,463 [salt.state       ][INFO    ][29299] Loading fresh modules for state activity
2018-05-09 23:26:36,523 [salt.fileclient  ][INFO    ][29299] Fetching file from saltenv 'base', ** done ** 'heat/init.sls'
2018-05-09 23:26:36,555 [salt.fileclient  ][INFO    ][29299] Fetching file from saltenv 'base', ** done ** 'heat/server.sls'
2018-05-09 23:26:37,861 [salt.state       ][INFO    ][29299] Running state [heat-api] at time 23:26:37.861463
2018-05-09 23:26:37,862 [salt.state       ][INFO    ][29299] Executing state pkg.installed for heat-api
2018-05-09 23:26:37,863 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:26:38,316 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['apt-cache', '-q', 'policy', 'heat-api'] in directory '/root'
2018-05-09 23:26:38,415 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:26:40,673 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:26:40,713 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-api'] in directory '/root'
2018-05-09 23:26:44,030 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232644021760
2018-05-09 23:26:44,046 [salt.minion      ][INFO    ][29684] Starting a new job with PID 29684
2018-05-09 23:26:44,065 [salt.minion      ][INFO    ][29684] Returning information for job: 20180509232644021760
2018-05-09 23:26:53,349 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:26:53,410 [salt.state       ][INFO    ][29299] Made the following changes:
'python-magnumclient' changed from 'absent' to '2.7.0-0ubuntu1~cloud0'
'python-heatclient' changed from 'absent' to '1.11.0-0ubuntu1~cloud0'
'python-manilaclient' changed from 'absent' to '1.17.1-0ubuntu1~cloud0'
'heat-api' changed from 'absent' to '1:9.0.4-0ubuntu1~cloud0'
'python-senlinclient' changed from 'absent' to '1.4.0-0ubuntu1~cloud0'
'python-aodhclient' changed from 'absent' to '0.9.0-0ubuntu1~cloud0'
'python-monascaclient' changed from 'absent' to '1.7.0-0ubuntu1~cloud0'
'python-croniter' changed from 'absent' to '0.3.8-1'
'python-mistralclient' changed from 'absent' to '1:3.1.0-0ubuntu1~cloud0'
'heat-common' changed from 'absent' to '1:9.0.4-0ubuntu1~cloud0'
'python-manilaclient-doc' changed from 'absent' to '1.17.1-0ubuntu1~cloud0'
'python-designateclient' changed from 'absent' to '2.7.0-0ubuntu1~cloud0'
'python-troveclient' changed from 'absent' to '1:2.12.0-0ubuntu1~cloud0'
'python-heat' changed from 'absent' to '1:9.0.4-0ubuntu1~cloud0'
'python-saharaclient' changed from 'absent' to '1.3.0-0ubuntu1~cloud0'
'python-yaql' changed from 'absent' to '1.1.0-0ubuntu1'
'python-zaqarclient' changed from 'absent' to '1.7.0-0ubuntu1~cloud0'

2018-05-09 23:26:53,438 [salt.state       ][INFO    ][29299] Loading fresh modules for state activity
2018-05-09 23:26:53,469 [salt.state       ][INFO    ][29299] Completed state [heat-api] at time 23:26:53.469660 duration_in_ms=15608.198
2018-05-09 23:26:53,480 [salt.state       ][INFO    ][29299] Running state [heat-api-cfn] at time 23:26:53.480960
2018-05-09 23:26:53,481 [salt.state       ][INFO    ][29299] Executing state pkg.installed for heat-api-cfn
2018-05-09 23:26:53,970 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:26:54,000 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-api-cfn'] in directory '/root'
2018-05-09 23:26:54,233 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232654228872
2018-05-09 23:26:54,249 [salt.minion      ][INFO    ][30440] Starting a new job with PID 30440
2018-05-09 23:26:54,271 [salt.minion      ][INFO    ][30440] Returning information for job: 20180509232654228872
2018-05-09 23:26:57,323 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:26:57,383 [salt.state       ][INFO    ][29299] Made the following changes:
'heat-api-cfn' changed from 'absent' to '1:9.0.4-0ubuntu1~cloud0'

2018-05-09 23:26:57,406 [salt.state       ][INFO    ][29299] Loading fresh modules for state activity
2018-05-09 23:26:57,466 [salt.state       ][INFO    ][29299] Completed state [heat-api-cfn] at time 23:26:57.466118 duration_in_ms=3985.157
2018-05-09 23:26:57,477 [salt.state       ][INFO    ][29299] Running state [heat-api-cloudwatch] at time 23:26:57.477823
2018-05-09 23:26:57,478 [salt.state       ][INFO    ][29299] Executing state pkg.installed for heat-api-cloudwatch
2018-05-09 23:26:57,980 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:26:58,009 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-api-cloudwatch'] in directory '/root'
2018-05-09 23:27:01,293 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:27:01,348 [salt.state       ][INFO    ][29299] Made the following changes:
'heat-api-cloudwatch' changed from 'absent' to '1:9.0.4-0ubuntu1~cloud0'

2018-05-09 23:27:01,371 [salt.state       ][INFO    ][29299] Loading fresh modules for state activity
2018-05-09 23:27:01,404 [salt.state       ][INFO    ][29299] Completed state [heat-api-cloudwatch] at time 23:27:01.404388 duration_in_ms=3926.565
2018-05-09 23:27:01,418 [salt.state       ][INFO    ][29299] Running state [heat-engine] at time 23:27:01.418428
2018-05-09 23:27:01,418 [salt.state       ][INFO    ][29299] Executing state pkg.installed for heat-engine
2018-05-09 23:27:01,851 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:27:01,887 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-engine'] in directory '/root'
2018-05-09 23:27:04,449 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232704443444
2018-05-09 23:27:04,464 [salt.minion      ][INFO    ][31253] Starting a new job with PID 31253
2018-05-09 23:27:04,482 [salt.minion      ][INFO    ][31253] Returning information for job: 20180509232704443444
2018-05-09 23:27:05,004 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:27:05,057 [salt.state       ][INFO    ][29299] Made the following changes:
'heat-engine' changed from 'absent' to '1:9.0.4-0ubuntu1~cloud0'

2018-05-09 23:27:05,080 [salt.state       ][INFO    ][29299] Loading fresh modules for state activity
2018-05-09 23:27:05,112 [salt.state       ][INFO    ][29299] Completed state [heat-engine] at time 23:27:05.111997 duration_in_ms=3693.568
2018-05-09 23:27:05,124 [salt.state       ][INFO    ][29299] Running state [heat-common] at time 23:27:05.124253
2018-05-09 23:27:05,124 [salt.state       ][INFO    ][29299] Executing state pkg.installed for heat-common
2018-05-09 23:27:05,548 [salt.state       ][INFO    ][29299] All specified packages are already installed
2018-05-09 23:27:05,548 [salt.state       ][INFO    ][29299] Completed state [heat-common] at time 23:27:05.548891 duration_in_ms=424.637
2018-05-09 23:27:05,549 [salt.state       ][INFO    ][29299] Running state [python-heatclient] at time 23:27:05.549173
2018-05-09 23:27:05,549 [salt.state       ][INFO    ][29299] Executing state pkg.installed for python-heatclient
2018-05-09 23:27:05,556 [salt.state       ][INFO    ][29299] All specified packages are already installed
2018-05-09 23:27:05,556 [salt.state       ][INFO    ][29299] Completed state [python-heatclient] at time 23:27:05.556231 duration_in_ms=7.058
2018-05-09 23:27:05,556 [salt.state       ][INFO    ][29299] Running state [gettext-base] at time 23:27:05.556462
2018-05-09 23:27:05,556 [salt.state       ][INFO    ][29299] Executing state pkg.installed for gettext-base
2018-05-09 23:27:05,563 [salt.state       ][INFO    ][29299] All specified packages are already installed
2018-05-09 23:27:05,563 [salt.state       ][INFO    ][29299] Completed state [gettext-base] at time 23:27:05.563814 duration_in_ms=7.352
2018-05-09 23:27:05,566 [salt.state       ][INFO    ][29299] Running state [/etc/heat/heat.conf] at time 23:27:05.566062
2018-05-09 23:27:05,566 [salt.state       ][INFO    ][29299] Executing state file.managed for /etc/heat/heat.conf
2018-05-09 23:27:05,590 [salt.fileclient  ][INFO    ][29299] Fetching file from saltenv 'base', ** done ** 'heat/files/pike/heat.conf.Debian'
2018-05-09 23:27:05,751 [salt.state       ][INFO    ][29299] File changed:
--- 
+++ 
@@ -1,12 +1,15 @@
+
 [DEFAULT]
 
 #
 # From heat.api.middleware.ssl
 #
+region_name_for_services=RegionOne
 
 # The HTTP Header that will be used to determine what the original request
 # protocol scheme was, even if it was removed by an SSL terminator proxy.
 # (string value)
+# Deprecated group/name - [DEFAULT]/secure_proxy_ssl_header
 #secure_proxy_ssl_header = X-Forwarded-Proto
 
 #
@@ -15,7 +18,7 @@
 
 # Name of the engine node. This can be an opaque identifier. It is not
 # necessarily a hostname, FQDN, or IP address. (string value)
-#host = lgw01-amd64-033
+#host = lgw01-02
 
 # List of directories to search for plug-ins. (list value)
 #plugin_dirs = /usr/lib64/heat,/usr/lib/heat,/usr/local/lib/heat,/usr/local/lib64/heat
@@ -26,13 +29,8 @@
 # The directory to search for template files. (string value)
 #template_dir = /etc/heat/templates
 
-# DEPRECATED: Select deferred auth method, stored password or trusts. (string
-# value)
+# Select deferred auth method, stored password or trusts. (string value)
 # Allowed values: password, trusts
-# This option is deprecated for removal since 9.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Stored password based deferred auth is broken when used with keystone
-# v3 and is not supported.
 #deferred_auth_method = trusts
 
 # Allow reauthentication on token expiry, such that long-running tasks may
@@ -40,6 +38,10 @@
 # value)
 # Allowed values: '', trusts
 #reauthentication_auth_method =
+
+# Gap, in seconds, to determine whether the given token is about to expire.
+# (integer value)
+#stale_token_duration = 30
 
 # Subset of trustor roles to be delegated to heat. If left unset, all roles of
 # a user will be delegated to heat when creating a stack. (list value)
@@ -173,15 +175,19 @@
 # require instances to use a different endpoint than in the keystone catalog
 # (string value)
 #heat_metadata_server_url = <None>
+heat_metadata_server_url=http://172.16.10.36:8000
 
 # URL of the Heat waitcondition server. (string value)
 #heat_waitcondition_server_url = <None>
+heat_waitcondition_server_url=http://172.16.10.36:8000/v1/waitcondition
 
 # URL of the Heat CloudWatch server. (string value)
 #heat_watch_server_url =
+heat_watch_server_url=http://172.16.10.36:8003
 
 # Instance connection to CFN/CW API via https. (string value)
 #instance_connection_is_secure = 0
+instance_connection_is_secure=0
 
 # Instance connection to CFN/CW API validate certs if SSL is used. (string
 # value)
@@ -202,12 +208,15 @@
 # `stack_user_domain_id` option is set, this option is ignored. (string value)
 #stack_user_domain_name = <None>
 
-# Keystone username, a user with roles sufficient to manage users and projects
-# in the stack_user_domain. (string value)
-#stack_domain_admin = <None>
-
-# Keystone password for stack_domain_admin user. (string value)
-#stack_domain_admin_password = <None>
+# Keystone username, a user with roles sufficient to manage
+# users and projects in the stack_user_domain. (string value)
+stack_domain_admin = heat_domain_admin
+
+# Keystone password for stack_domain_admin user. (string
+# value)
+stack_domain_admin_password=opnfv_secret
+
+stack_user_domain_name = heat_user_domain
 
 # Maximum raw byte size of any template. (integer value)
 #max_template_size = 524288
@@ -241,13 +250,6 @@
 
 # Fully qualified class name to use as a client backend. (string value)
 #cloud_backend = heat.engine.clients.OpenStackClients
-
-#
-# From heat.engine.clients.os.keystone.heat_keystoneclient
-#
-
-# Fully qualified class name to use as a keystone backend. (string value)
-#keystone_backend = heat.engine.clients.os.keystone.heat_keystoneclient.KsClientWrapper
 
 #
 # From heat.engine.notification
@@ -274,6 +276,13 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -295,6 +304,7 @@
 # log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
+log_file=/var/log/heat/heat.log
 
 # (Optional) The base directory used for relative log_file  paths. This option
 # is ignored if log_config_append is set. (string value)
@@ -313,12 +323,6 @@
 # is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
@@ -347,7 +351,7 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -380,6 +384,7 @@
 #
 
 # Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
 #rpc_conn_pool_size = 30
 
 # The pool size limit for connections expiration policy (integer value)
@@ -390,24 +395,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -420,21 +431,26 @@
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -449,20 +465,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -527,18 +547,18 @@
 # value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
+rpc_response_timeout = 600
 
 # A URL representing the messaging driver to use and its full configuration.
 # (string value)
 #transport_url = <None>
-
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
 # This option is deprecated for removal.
@@ -583,7 +603,9 @@
 # Specify a timeout after which a gracefully shutdown server will exit. Zero
 # value means endless wait. (integer value)
 #graceful_shutdown_timeout = 60
-
+max_resources_per_stack=20000
+max_json_body_size=10880000
+max_template_size=5440000
 
 [auth_password]
 
@@ -788,32 +810,6 @@
 # Optional heat url in format like http://0.0.0.0:8004/v1/%(tenant_id)s.
 # (string value)
 #url =
-
-
-[clients_keystone]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with
-# the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-# Unversioned keystone url in format like http://0.0.0.0:5000. (string value)
-#auth_uri =
 
 
 [clients_magnum]
@@ -1093,6 +1089,7 @@
 # Maximum cache age of CORS preflight requests. (integer value)
 #max_age = 3600
 
+
 # Indicate which methods can be used during the actual request. (list value)
 #allow_methods = GET,PUT,POST,DELETE,PATCH
 
@@ -1101,13 +1098,51 @@
 #allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
 
 
+[cors.subdomain]
+
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
 [database]
 
 #
 # From oslo.db
 #
 
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect
+# the database.
+#sqlite_db = oslo.sqlite
+
 # If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
 #sqlite_synchronous = true
 
 # The back end to use for the database. (string value)
@@ -1120,6 +1155,7 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
+connection = mysql+pymysql://heat:opnfv_secret@172.16.10.36/heat?charset=utf8
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
@@ -1131,10 +1167,6 @@
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
 # Timeout before idle SQL connections are reaped. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
@@ -1151,12 +1183,14 @@
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 30
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -1167,6 +1201,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 60
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -1206,30 +1241,28 @@
 [ec2authtoken]
 
 #
-# From heat.api.aws.ec2token
+# Options defined in heat.api.aws.ec2token
 #
 
 # Authentication Endpoint URI. (string value)
-#auth_uri = <None>
+auth_uri=http://172.16.10.36:5000
 
 # Allow orchestration of multiple clouds. (boolean value)
-#multi_cloud = false
-
-# Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least
-# one endpoint needs to be specified. (list value)
-#allowed_auth_uris =
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = false
+#multi_cloud=false
+
+# Allowed keystone endpoints for auth_uri when multi_cloud is
+# enabled. At least one endpoint needs to be specified. (list
+# value)
+#allowed_auth_uris=
+keystone_ec2_uri=http://172.16.10.36:5000/v3/ec2tokens
+
+[clients]
+endpoint_type = internalURL
+
+[clients_heat]
+endpoint_type = publicURL
+[clients_keystone]
+auth_uri=http://172.16.10.36:35357
 
 
 [eventlet_opts]
@@ -1283,26 +1316,34 @@
 
 # Address to bind the server. Useful when selecting a particular network
 # interface. (IP address value)
+# Deprecated group/name - [DEFAULT]/bind_host
 #bind_host = 0.0.0.0
+bind_host = 172.16.10.36
 
 # The port on which the server will listen. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/bind_port
 #bind_port = 8004
 
 # Number of backlog requests to configure the socket with. (integer value)
+# Deprecated group/name - [DEFAULT]/backlog
 #backlog = 4096
 
 # Location of the SSL certificate file to use for SSL mode. (string value)
+# Deprecated group/name - [DEFAULT]/cert_file
 #cert_file = <None>
 
 # Location of the SSL key file to use for enabling SSL mode. (string value)
+# Deprecated group/name - [DEFAULT]/key_file
 #key_file = <None>
 
 # Number of workers for Heat service. Default value 0 means, that service will
 # start number of workers equal number of cores on server. (integer value)
 # Minimum value: 0
+# Deprecated group/name - [DEFAULT]/workers
 #workers = 0
+workers=4
 
 # Maximum line size of message headers to be accepted. max_header_line may need
 # to be increased when using large tokens (typically those generated by the
@@ -1323,24 +1364,31 @@
 
 # Address to bind the server. Useful when selecting a particular network
 # interface. (IP address value)
+# Deprecated group/name - [DEFAULT]/bind_host
 #bind_host = 0.0.0.0
+bind_host = 172.16.10.36
 
 # The port on which the server will listen. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/bind_port
 #bind_port = 8000
 
 # Number of backlog requests to configure the socket with. (integer value)
+# Deprecated group/name - [DEFAULT]/backlog
 #backlog = 4096
 
 # Location of the SSL certificate file to use for SSL mode. (string value)
+# Deprecated group/name - [DEFAULT]/cert_file
 #cert_file = <None>
 
 # Location of the SSL key file to use for enabling SSL mode. (string value)
+# Deprecated group/name - [DEFAULT]/key_file
 #key_file = <None>
 
 # Number of workers for Heat service. (integer value)
 # Minimum value: 0
+# Deprecated group/name - [DEFAULT]/workers
 #workers = 1
 
 # Maximum line size of message headers to be accepted. max_header_line may need
@@ -1362,24 +1410,31 @@
 
 # Address to bind the server. Useful when selecting a particular network
 # interface. (IP address value)
+# Deprecated group/name - [DEFAULT]/bind_host
 #bind_host = 0.0.0.0
+bind_host = 172.16.10.36
 
 # The port on which the server will listen. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/bind_port
 #bind_port = 8003
 
 # Number of backlog requests to configure the socket with. (integer value)
+# Deprecated group/name - [DEFAULT]/backlog
 #backlog = 4096
 
 # Location of the SSL certificate file to use for SSL mode. (string value)
+# Deprecated group/name - [DEFAULT]/cert_file
 #cert_file = <None>
 
 # Location of the SSL key file to use for enabling SSL mode. (string value)
+# Deprecated group/name - [DEFAULT]/key_file
 #key_file = <None>
 
 # Number of workers for Heat service. (integer value)
 # Minimum value: 0
+# Deprecated group/name - [DEFAULT]/workers
 #workers = 1
 
 # Maximum line size of message headers to be accepted. max_header_line may need
@@ -1402,10 +1457,10 @@
 # Complete "public" Identity API endpoint. This endpoint should not be an
 # "admin" endpoint, as it should be accessible by all end users.
 # Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should ideally be unversioned, client support in the
-# wild varies. If you're using a versioned v2 endpoint here, then this should
-# *not* be the same endpoint the service user utilizes for validating tokens,
-# because normal end users may not be able to reach that endpoint. (string
+# Although this endpoint should  ideally be unversioned, client support in the
+# wild varies.  If you're using a versioned v2 endpoint here, then this  should
+# *not* be the same endpoint the service user utilizes  for validating tokens,
+# because normal end users may not be  able to reach that endpoint. (string
 # value)
 #auth_uri = <None>
 
@@ -1602,7 +1657,18 @@
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
-
+auth_type = password
+auth_uri=http://172.16.10.36:5000
+#identity_uri=http://172.16.10.36:35357
+#admin_user=heat
+#admin_password=opnfv_secret
+#admin_tenant_name=service
+auth_url=http://172.16.10.36:35357
+username = heat
+password = opnfv_secret
+project_name = service
+project_domain_name = Default
+user_domain_name = Default
 
 [matchmaker_redis]
 
@@ -1658,64 +1724,61 @@
 
 # Name for the AMQP container. must be globally unique. Defaults to a generated
 # UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
 #container_name = <None>
 
 # Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
 #idle_timeout = 0
 
 # Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
 #trace = false
 
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
 # CA certificate PEM file used to verify the server's certificate (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
 #ssl_ca_file =
 
 # Self-identifying certificate PEM file for client authentication (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
 #ssl_cert_file =
 
 # Private key PEM file used to sign ssl_cert_file certificate (optional)
 # (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
 #ssl_key_file =
 
 # Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
 #ssl_key_password = <None>
 
 # DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Not applicable - not a SSL server
 #allow_insecure_clients = false
 
 # Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
 #sasl_mechanisms =
 
 # Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
 #sasl_config_dir =
 
 # Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
 #sasl_config_name =
 
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
 #username =
 
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
 #password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
@@ -1770,12 +1833,15 @@
 #addressing_mode = dynamic
 
 # address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
 #server_request_prefix = exclusive
 
 # address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
 #broadcast_prefix = broadcast
 
 # address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
 #group_request_prefix = unicast
 
 # Address prefix for all generated RPC addresses (string value)
@@ -1863,7 +1929,7 @@
 # Max fetch bytes of Kafka consumer (integer value)
 #kafka_max_fetch_bytes = 1048576
 
-# Default timeout(s) for Kafka consumers (floating point value)
+# Default timeout(s) for Kafka consumers (integer value)
 #kafka_consumer_timeout = 1.0
 
 # Pool Size for Kafka Consumers (integer value)
@@ -1897,6 +1963,7 @@
 # messaging, messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
+driver = messagingv2
 
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
@@ -1908,11 +1975,6 @@
 # Deprecated group/name - [DEFAULT]/notification_topics
 #topics = notifications
 
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
 
 [oslo_messaging_rabbit]
 
@@ -1926,31 +1988,30 @@
 #amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
 #amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
 
 # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
 # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
 # distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
 
 # SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
 
 # SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
 
 # SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
 #kombu_reconnect_delay = 1.0
 
 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
@@ -1970,6 +2031,7 @@
 
 # DEPRECATED: The RabbitMQ broker address where a single node is used. (string
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1979,24 +2041,32 @@
 # value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_port = 5672
 
 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_hosts = $rabbit_host:$rabbit_port
 
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
 # DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_userid = guest
 
 # DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -2004,9 +2074,11 @@
 
 # The RabbitMQ login method. (string value)
 # Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
 #rabbit_login_method = AMQPLAIN
 
 # DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -2017,6 +2089,7 @@
 
 # How long to backoff for between retries when connecting to RabbitMQ. (integer
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
 #rabbit_retry_backoff = 2
 
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
@@ -2025,6 +2098,7 @@
 
 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
 # (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #rabbit_max_retries = 0
@@ -2035,6 +2109,7 @@
 # If you just want to make sure that all queues (except those with auto-
 # generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
 # HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
 #rabbit_ha_queues = false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
@@ -2057,6 +2132,7 @@
 #heartbeat_rate = 2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
 #fake_rabbit = false
 
 # Maximum number of channels to allow (integer value)
@@ -2067,6 +2143,9 @@
 
 # How often to send heartbeats for consumer's connections (integer value)
 #heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
 
 # Arguments passed to ssl.wrap_socket (dict value)
 #ssl_options = <None>
@@ -2172,24 +2251,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -2202,21 +2287,26 @@
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -2231,20 +2321,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -2315,6 +2409,7 @@
 #
 # From oslo.middleware
 #
+enable_proxy_headers_parsing = True
 
 # The maximum body size for each  request, in bytes. (integer value)
 # Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
@@ -2340,9 +2435,11 @@
 #
 
 # The file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
 #policy_file = policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
 #policy_default_rule = default
 
 # Directories where policy configuration files are stored. They can be relative
@@ -2350,6 +2447,7 @@
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
 #policy_dirs = policy.d
 
 
@@ -2509,7 +2607,13 @@
 #
 # From heat.common.context
 #
-
+auth_plugin = password
+auth_url = http://172.16.10.36:35357
+username = heat
+password = opnfv_secret
+user_domain_name = default
+project_domain_id = default
+user_domain_id = default
 # Authentication type to load (string value)
 # Deprecated group/name - [trustee]/auth_plugin
 #auth_type = <None>
@@ -2527,11 +2631,11 @@
 #domain_name = <None>
 
 # Project ID to scope to (string value)
-# Deprecated group/name - [trustee]/tenant_id
+# Deprecated group/name - [trustee]/tenant-id
 #project_id = <None>
 
 # Project name to scope to (string value)
-# Deprecated group/name - [trustee]/tenant_name
+# Deprecated group/name - [trustee]/tenant-name
 #project_name = <None>
 
 # Domain ID containing project (string value)
@@ -2557,7 +2661,7 @@
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [trustee]/user_name
+# Deprecated group/name - [trustee]/user-name
 #username = <None>
 
 # User's domain id (string value)

2018-05-09 23:27:05,752 [salt.state       ][INFO    ][29299] Completed state [/etc/heat/heat.conf] at time 23:27:05.752525 duration_in_ms=186.462
2018-05-09 23:27:05,752 [salt.state       ][INFO    ][29299] Running state [/etc/heat/api-paste.ini] at time 23:27:05.752950
2018-05-09 23:27:05,753 [salt.state       ][INFO    ][29299] Executing state file.managed for /etc/heat/api-paste.ini
2018-05-09 23:27:05,777 [salt.fileclient  ][INFO    ][29299] Fetching file from saltenv 'base', ** done ** 'heat/files/pike/api-paste.ini'
2018-05-09 23:27:05,780 [salt.state       ][INFO    ][29299] File /etc/heat/api-paste.ini is in the correct state
2018-05-09 23:27:05,780 [salt.state       ][INFO    ][29299] Completed state [/etc/heat/api-paste.ini] at time 23:27:05.780704 duration_in_ms=27.754
2018-05-09 23:27:05,781 [salt.state       ][INFO    ][29299] Running state [/etc/default/heat-api] at time 23:27:05.781099
2018-05-09 23:27:05,781 [salt.state       ][INFO    ][29299] Executing state file.managed for /etc/default/heat-api
2018-05-09 23:27:05,795 [salt.fileclient  ][INFO    ][29299] Fetching file from saltenv 'base', ** done ** 'heat/files/default'
2018-05-09 23:27:05,799 [salt.state       ][INFO    ][29299] File changed:
New file
2018-05-09 23:27:05,799 [salt.state       ][INFO    ][29299] Completed state [/etc/default/heat-api] at time 23:27:05.799388 duration_in_ms=18.289
2018-05-09 23:27:05,799 [salt.state       ][INFO    ][29299] Running state [/etc/default/heat-api-cfn] at time 23:27:05.799774
2018-05-09 23:27:05,800 [salt.state       ][INFO    ][29299] Executing state file.managed for /etc/default/heat-api-cfn
2018-05-09 23:27:05,811 [salt.state       ][INFO    ][29299] File changed:
New file
2018-05-09 23:27:05,812 [salt.state       ][INFO    ][29299] Completed state [/etc/default/heat-api-cfn] at time 23:27:05.812092 duration_in_ms=12.318
2018-05-09 23:27:05,812 [salt.state       ][INFO    ][29299] Running state [/etc/default/heat-api-cloudwatch] at time 23:27:05.812479
2018-05-09 23:27:05,812 [salt.state       ][INFO    ][29299] Executing state file.managed for /etc/default/heat-api-cloudwatch
2018-05-09 23:27:05,824 [salt.state       ][INFO    ][29299] File changed:
New file
2018-05-09 23:27:05,825 [salt.state       ][INFO    ][29299] Completed state [/etc/default/heat-api-cloudwatch] at time 23:27:05.825033 duration_in_ms=12.554
2018-05-09 23:27:05,825 [salt.state       ][INFO    ][29299] Running state [/etc/default/heat-engine] at time 23:27:05.825420
2018-05-09 23:27:05,825 [salt.state       ][INFO    ][29299] Executing state file.managed for /etc/default/heat-engine
2018-05-09 23:27:05,837 [salt.state       ][INFO    ][29299] File changed:
New file
2018-05-09 23:27:05,837 [salt.state       ][INFO    ][29299] Completed state [/etc/default/heat-engine] at time 23:27:05.837379 duration_in_ms=11.959
2018-05-09 23:27:05,839 [salt.state       ][INFO    ][29299] Running state [source /root/keystonercv3; heat-keystone-setup-domain --stack-user-domain-name heat_user_domain --stack-domain-admin heat_domain_admin --stack-domain-admin-password opnfv_secret] at time 23:27:05.839077
2018-05-09 23:27:05,839 [salt.state       ][INFO    ][29299] Executing state cmd.run for source /root/keystonercv3; heat-keystone-setup-domain --stack-user-domain-name heat_user_domain --stack-domain-admin heat_domain_admin --stack-domain-admin-password opnfv_secret
2018-05-09 23:27:05,839 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command 'source /root/keystonercv3; heat-keystone-setup-domain --stack-user-domain-name heat_user_domain --stack-domain-admin heat_domain_admin --stack-domain-admin-password opnfv_secret' in directory '/root'
2018-05-09 23:27:11,762 [salt.state       ][INFO    ][29299] {'pid': 31303, 'retcode': 0, 'stderr': "/usr/lib/python2.7/dist-packages/keystoneauth1/adapter.py:182: UserWarning: Using keystoneclient sessions has been deprecated. Please update your software to use keystoneauth1.\n  warnings.warn('Using keystoneclient sessions has been deprecated. '", 'stdout': '2018-05-09 23:27:08.071 31304 INFO __main__ [-] Creating domain heat_user_domain\n\nPlease update your heat.conf with the following in [DEFAULT]\n\nstack_user_domain_id=b2b13106a4f049daaf5628b8db0e56a4\nstack_domain_admin=heat_domain_admin\nstack_domain_admin_password=opnfv_secret'}
2018-05-09 23:27:11,763 [salt.state       ][INFO    ][29299] Completed state [source /root/keystonercv3; heat-keystone-setup-domain --stack-user-domain-name heat_user_domain --stack-domain-admin heat_domain_admin --stack-domain-admin-password opnfv_secret] at time 23:27:11.763440 duration_in_ms=5924.361
2018-05-09 23:27:11,767 [salt.state       ][INFO    ][29299] Running state [heat-manage db_sync] at time 23:27:11.767378
2018-05-09 23:27:11,767 [salt.state       ][INFO    ][29299] Executing state cmd.run for heat-manage db_sync
2018-05-09 23:27:11,768 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command 'heat-manage db_sync' in directory '/root'
2018-05-09 23:27:13,954 [salt.state       ][INFO    ][29299] {'pid': 31328, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': '2018-05-09 23:27:13.074 31329 INFO migrate.versioning.api [-] 70 -> 71... \n2018-05-09 23:27:13.437 31329 INFO migrate.versioning.api [-] done\n2018-05-09 23:27:13.438 31329 INFO migrate.versioning.api [-] 71 -> 72... \n2018-05-09 23:27:13.514 31329 INFO migrate.versioning.api [-] done\n2018-05-09 23:27:13.514 31329 INFO migrate.versioning.api [-] 72 -> 73... \n2018-05-09 23:27:13.579 31329 INFO migrate.versioning.api [-] done\n2018-05-09 23:27:13.579 31329 INFO migrate.versioning.api [-] 73 -> 74... \n2018-05-09 23:27:13.586 31329 INFO migrate.versioning.api [-] done\n2018-05-09 23:27:13.586 31329 INFO migrate.versioning.api [-] 74 -> 75... \n2018-05-09 23:27:13.593 31329 INFO migrate.versioning.api [-] done\n2018-05-09 23:27:13.593 31329 INFO migrate.versioning.api [-] 75 -> 76... \n2018-05-09 23:27:13.599 31329 INFO migrate.versioning.api [-] done\n2018-05-09 23:27:13.599 31329 INFO migrate.versioning.api [-] 76 -> 77... \n2018-05-09 23:27:13.605 31329 INFO migrate.versioning.api [-] done\n2018-05-09 23:27:13.605 31329 INFO migrate.versioning.api [-] 77 -> 78... \n2018-05-09 23:27:13.611 31329 INFO migrate.versioning.api [-] done\n2018-05-09 23:27:13.611 31329 INFO migrate.versioning.api [-] 78 -> 79... \n2018-05-09 23:27:13.779 31329 INFO migrate.versioning.api [-] done\n2018-05-09 23:27:13.779 31329 INFO migrate.versioning.api [-] 79 -> 80... \n2018-05-09 23:27:13.887 31329 INFO migrate.versioning.api [-] done'}
2018-05-09 23:27:13,955 [salt.state       ][INFO    ][29299] Completed state [heat-manage db_sync] at time 23:27:13.955733 duration_in_ms=2188.354
2018-05-09 23:27:13,957 [salt.state       ][INFO    ][29299] Running state [chown heat:heat /var/log/heat/ -R] at time 23:27:13.957256
2018-05-09 23:27:13,957 [salt.state       ][INFO    ][29299] Executing state cmd.run for chown heat:heat /var/log/heat/ -R
2018-05-09 23:27:13,959 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command 'chown heat:heat /var/log/heat/ -R' in directory '/root'
2018-05-09 23:27:13,981 [salt.state       ][INFO    ][29299] {'pid': 31338, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:27:13,982 [salt.state       ][INFO    ][29299] Completed state [chown heat:heat /var/log/heat/ -R] at time 23:27:13.982182 duration_in_ms=24.926
2018-05-09 23:27:13,988 [salt.state       ][INFO    ][29299] Running state [heat-api] at time 23:27:13.988503
2018-05-09 23:27:13,989 [salt.state       ][INFO    ][29299] Executing state service.running for heat-api
2018-05-09 23:27:13,990 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'status', 'heat-api.service', '-n', '0'] in directory '/root'
2018-05-09 23:27:14,013 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-active', 'heat-api.service'] in directory '/root'
2018-05-09 23:27:14,034 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-enabled', 'heat-api.service'] in directory '/root'
2018-05-09 23:27:14,053 [salt.state       ][INFO    ][29299] The service heat-api is already running
2018-05-09 23:27:14,054 [salt.state       ][INFO    ][29299] Completed state [heat-api] at time 23:27:14.054202 duration_in_ms=65.699
2018-05-09 23:27:14,054 [salt.state       ][INFO    ][29299] Running state [heat-api] at time 23:27:14.054788
2018-05-09 23:27:14,055 [salt.state       ][INFO    ][29299] Executing state service.mod_watch for heat-api
2018-05-09 23:27:14,056 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-active', 'heat-api.service'] in directory '/root'
2018-05-09 23:27:14,078 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-enabled', 'heat-api.service'] in directory '/root'
2018-05-09 23:27:14,100 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-api.service'] in directory '/root'
2018-05-09 23:27:14,189 [salt.state       ][INFO    ][29299] {'heat-api': True}
2018-05-09 23:27:14,189 [salt.state       ][INFO    ][29299] Completed state [heat-api] at time 23:27:14.189656 duration_in_ms=134.868
2018-05-09 23:27:14,191 [salt.state       ][INFO    ][29299] Running state [heat-api-cfn] at time 23:27:14.191854
2018-05-09 23:27:14,192 [salt.state       ][INFO    ][29299] Executing state service.running for heat-api-cfn
2018-05-09 23:27:14,193 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'status', 'heat-api-cfn.service', '-n', '0'] in directory '/root'
2018-05-09 23:27:14,213 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-active', 'heat-api-cfn.service'] in directory '/root'
2018-05-09 23:27:14,227 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-enabled', 'heat-api-cfn.service'] in directory '/root'
2018-05-09 23:27:14,245 [salt.state       ][INFO    ][29299] The service heat-api-cfn is already running
2018-05-09 23:27:14,245 [salt.state       ][INFO    ][29299] Completed state [heat-api-cfn] at time 23:27:14.245753 duration_in_ms=53.899
2018-05-09 23:27:14,246 [salt.state       ][INFO    ][29299] Running state [heat-api-cfn] at time 23:27:14.246038
2018-05-09 23:27:14,246 [salt.state       ][INFO    ][29299] Executing state service.mod_watch for heat-api-cfn
2018-05-09 23:27:14,247 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-active', 'heat-api-cfn.service'] in directory '/root'
2018-05-09 23:27:14,263 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-enabled', 'heat-api-cfn.service'] in directory '/root'
2018-05-09 23:27:14,281 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-api-cfn.service'] in directory '/root'
2018-05-09 23:27:14,321 [salt.state       ][INFO    ][29299] {'heat-api-cfn': True}
2018-05-09 23:27:14,322 [salt.state       ][INFO    ][29299] Completed state [heat-api-cfn] at time 23:27:14.322714 duration_in_ms=76.675
2018-05-09 23:27:14,324 [salt.state       ][INFO    ][29299] Running state [heat-api-cloudwatch] at time 23:27:14.323988
2018-05-09 23:27:14,324 [salt.state       ][INFO    ][29299] Executing state service.running for heat-api-cloudwatch
2018-05-09 23:27:14,326 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'status', 'heat-api-cloudwatch.service', '-n', '0'] in directory '/root'
2018-05-09 23:27:14,343 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-active', 'heat-api-cloudwatch.service'] in directory '/root'
2018-05-09 23:27:14,361 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-enabled', 'heat-api-cloudwatch.service'] in directory '/root'
2018-05-09 23:27:14,375 [salt.state       ][INFO    ][29299] The service heat-api-cloudwatch is already running
2018-05-09 23:27:14,376 [salt.state       ][INFO    ][29299] Completed state [heat-api-cloudwatch] at time 23:27:14.376267 duration_in_ms=52.277
2018-05-09 23:27:14,376 [salt.state       ][INFO    ][29299] Running state [heat-api-cloudwatch] at time 23:27:14.376538
2018-05-09 23:27:14,376 [salt.state       ][INFO    ][29299] Executing state service.mod_watch for heat-api-cloudwatch
2018-05-09 23:27:14,377 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-active', 'heat-api-cloudwatch.service'] in directory '/root'
2018-05-09 23:27:14,392 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-enabled', 'heat-api-cloudwatch.service'] in directory '/root'
2018-05-09 23:27:14,406 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-api-cloudwatch.service'] in directory '/root'
2018-05-09 23:27:14,451 [salt.state       ][INFO    ][29299] {'heat-api-cloudwatch': True}
2018-05-09 23:27:14,451 [salt.state       ][INFO    ][29299] Completed state [heat-api-cloudwatch] at time 23:27:14.451544 duration_in_ms=75.006
2018-05-09 23:27:14,452 [salt.state       ][INFO    ][29299] Running state [heat-engine] at time 23:27:14.452841
2018-05-09 23:27:14,453 [salt.state       ][INFO    ][29299] Executing state service.running for heat-engine
2018-05-09 23:27:14,455 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'status', 'heat-engine.service', '-n', '0'] in directory '/root'
2018-05-09 23:27:14,471 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-active', 'heat-engine.service'] in directory '/root'
2018-05-09 23:27:14,491 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-enabled', 'heat-engine.service'] in directory '/root'
2018-05-09 23:27:14,506 [salt.state       ][INFO    ][29299] The service heat-engine is already running
2018-05-09 23:27:14,506 [salt.state       ][INFO    ][29299] Completed state [heat-engine] at time 23:27:14.506873 duration_in_ms=54.031
2018-05-09 23:27:14,507 [salt.state       ][INFO    ][29299] Running state [heat-engine] at time 23:27:14.507201
2018-05-09 23:27:14,507 [salt.state       ][INFO    ][29299] Executing state service.mod_watch for heat-engine
2018-05-09 23:27:14,508 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-active', 'heat-engine.service'] in directory '/root'
2018-05-09 23:27:14,520 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemctl', 'is-enabled', 'heat-engine.service'] in directory '/root'
2018-05-09 23:27:14,535 [salt.loaded.int.module.cmdmod][INFO    ][29299] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-engine.service'] in directory '/root'
2018-05-09 23:27:14,651 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232714643123
2018-05-09 23:27:14,669 [salt.minion      ][INFO    ][31546] Starting a new job with PID 31546
2018-05-09 23:27:14,686 [salt.minion      ][INFO    ][31546] Returning information for job: 20180509232714643123
2018-05-09 23:27:14,911 [salt.state       ][INFO    ][29299] {'heat-engine': True}
2018-05-09 23:27:14,912 [salt.state       ][INFO    ][29299] Completed state [heat-engine] at time 23:27:14.912172 duration_in_ms=404.97
2018-05-09 23:27:14,919 [salt.minion      ][INFO    ][29299] Returning information for job: 20180509232633893973
2018-05-09 23:27:15,615 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232715609355
2018-05-09 23:27:15,630 [salt.minion      ][INFO    ][31616] Starting a new job with PID 31616
2018-05-09 23:27:18,064 [salt.state       ][INFO    ][31616] Loading fresh modules for state activity
2018-05-09 23:27:18,119 [salt.fileclient  ][INFO    ][31616] Fetching file from saltenv 'base', ** done ** 'cinder/init.sls'
2018-05-09 23:27:18,153 [salt.fileclient  ][INFO    ][31616] Fetching file from saltenv 'base', ** done ** 'cinder/controller.sls'
2018-05-09 23:27:18,314 [salt.fileclient  ][INFO    ][31616] Fetching file from saltenv 'base', ** done ** 'cinder/user.sls'
2018-05-09 23:27:18,992 [salt.fileclient  ][INFO    ][31616] Fetching file from saltenv 'base', ** done ** 'cinder/volume.sls'
2018-05-09 23:27:20,289 [salt.state       ][INFO    ][31616] Running state [apache2] at time 23:27:20.289503
2018-05-09 23:27:20,290 [salt.state       ][INFO    ][31616] Executing state pkg.installed for apache2
2018-05-09 23:27:20,291 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:27:20,681 [salt.state       ][INFO    ][31616] All specified packages are already installed
2018-05-09 23:27:20,681 [salt.state       ][INFO    ][31616] Completed state [apache2] at time 23:27:20.681539 duration_in_ms=392.036
2018-05-09 23:27:20,682 [salt.state       ][INFO    ][31616] Running state [a2enmod ssl] at time 23:27:20.682231
2018-05-09 23:27:20,682 [salt.state       ][INFO    ][31616] Executing state cmd.run for a2enmod ssl
2018-05-09 23:27:20,683 [salt.state       ][INFO    ][31616] /etc/apache2/mods-enabled/ssl.load exists
2018-05-09 23:27:20,683 [salt.state       ][INFO    ][31616] Completed state [a2enmod ssl] at time 23:27:20.683458 duration_in_ms=1.226
2018-05-09 23:27:20,683 [salt.state       ][INFO    ][31616] Running state [a2enmod rewrite] at time 23:27:20.683933
2018-05-09 23:27:20,684 [salt.state       ][INFO    ][31616] Executing state cmd.run for a2enmod rewrite
2018-05-09 23:27:20,684 [salt.state       ][INFO    ][31616] /etc/apache2/mods-enabled/rewrite.load exists
2018-05-09 23:27:20,684 [salt.state       ][INFO    ][31616] Completed state [a2enmod rewrite] at time 23:27:20.684643 duration_in_ms=0.71
2018-05-09 23:27:20,685 [salt.state       ][INFO    ][31616] Running state [libapache2-mod-wsgi] at time 23:27:20.685103
2018-05-09 23:27:20,685 [salt.state       ][INFO    ][31616] Executing state pkg.installed for libapache2-mod-wsgi
2018-05-09 23:27:20,692 [salt.state       ][INFO    ][31616] All specified packages are already installed
2018-05-09 23:27:20,692 [salt.state       ][INFO    ][31616] Completed state [libapache2-mod-wsgi] at time 23:27:20.692887 duration_in_ms=7.783
2018-05-09 23:27:20,693 [salt.state       ][INFO    ][31616] Running state [a2enmod wsgi] at time 23:27:20.693357
2018-05-09 23:27:20,693 [salt.state       ][INFO    ][31616] Executing state cmd.run for a2enmod wsgi
2018-05-09 23:27:20,693 [salt.state       ][INFO    ][31616] /etc/apache2/mods-enabled/wsgi.load exists
2018-05-09 23:27:20,694 [salt.state       ][INFO    ][31616] Completed state [a2enmod wsgi] at time 23:27:20.694085 duration_in_ms=0.728
2018-05-09 23:27:20,697 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 23:27:20.697244
2018-05-09 23:27:20,697 [salt.state       ][INFO    ][31616] Executing state file.absent for /etc/apache2/mods-enabled/mpm_prefork.load
2018-05-09 23:27:20,697 [salt.state       ][INFO    ][31616] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2018-05-09 23:27:20,698 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 23:27:20.698011 duration_in_ms=0.768
2018-05-09 23:27:20,698 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 23:27:20.698225
2018-05-09 23:27:20,698 [salt.state       ][INFO    ][31616] Executing state file.absent for /etc/apache2/mods-enabled/mpm_prefork.conf
2018-05-09 23:27:20,698 [salt.state       ][INFO    ][31616] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2018-05-09 23:27:20,698 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 23:27:20.698890 duration_in_ms=0.665
2018-05-09 23:27:20,699 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:27:20.699098
2018-05-09 23:27:20,699 [salt.state       ][INFO    ][31616] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.load
2018-05-09 23:27:20,699 [salt.state       ][INFO    ][31616] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-05-09 23:27:20,699 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:27:20.699727 duration_in_ms=0.629
2018-05-09 23:27:20,699 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:27:20.699930
2018-05-09 23:27:20,700 [salt.state       ][INFO    ][31616] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.conf
2018-05-09 23:27:20,700 [salt.state       ][INFO    ][31616] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-05-09 23:27:20,700 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:27:20.700547 duration_in_ms=0.617
2018-05-09 23:27:20,703 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 23:27:20.703111
2018-05-09 23:27:20,703 [salt.state       ][INFO    ][31616] Executing state file.managed for /etc/apache2/mods-available/mpm_event.conf
2018-05-09 23:27:20,810 [salt.state       ][INFO    ][31616] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2018-05-09 23:27:20,810 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 23:27:20.810370 duration_in_ms=107.259
2018-05-09 23:27:20,811 [salt.state       ][INFO    ][31616] Running state [a2enmod mpm_event] at time 23:27:20.811271
2018-05-09 23:27:20,811 [salt.state       ][INFO    ][31616] Executing state cmd.run for a2enmod mpm_event
2018-05-09 23:27:20,811 [salt.state       ][INFO    ][31616] /etc/apache2/mods-enabled/mpm_event.load exists
2018-05-09 23:27:20,812 [salt.state       ][INFO    ][31616] Completed state [a2enmod mpm_event] at time 23:27:20.811982 duration_in_ms=0.711
2018-05-09 23:27:20,812 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/ports.conf] at time 23:27:20.812443
2018-05-09 23:27:20,812 [salt.state       ][INFO    ][31616] Executing state file.managed for /etc/apache2/ports.conf
2018-05-09 23:27:20,884 [salt.state       ][INFO    ][31616] File /etc/apache2/ports.conf is in the correct state
2018-05-09 23:27:20,884 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/ports.conf] at time 23:27:20.884743 duration_in_ms=72.299
2018-05-09 23:27:20,885 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/conf-available/security.conf] at time 23:27:20.885528
2018-05-09 23:27:20,885 [salt.state       ][INFO    ][31616] Executing state file.managed for /etc/apache2/conf-available/security.conf
2018-05-09 23:27:20,969 [salt.state       ][INFO    ][31616] File /etc/apache2/conf-available/security.conf is in the correct state
2018-05-09 23:27:20,970 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/conf-available/security.conf] at time 23:27:20.970247 duration_in_ms=84.717
2018-05-09 23:27:20,980 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 23:27:20.980723
2018-05-09 23:27:20,980 [salt.state       ][INFO    ][31616] Executing state file.absent for /etc/apache2/sites-enabled/000-default.conf
2018-05-09 23:27:20,981 [salt.state       ][INFO    ][31616] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-05-09 23:27:20,981 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 23:27:20.981477 duration_in_ms=0.754
2018-05-09 23:27:20,981 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 23:27:20.981955
2018-05-09 23:27:20,982 [salt.state       ][INFO    ][31616] Executing state file.managed for /etc/apache2/sites-available/keystone_wsgi.conf
2018-05-09 23:27:21,262 [salt.state       ][INFO    ][31616] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2018-05-09 23:27:21,262 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 23:27:21.262255 duration_in_ms=280.299
2018-05-09 23:27:21,263 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 23:27:21.263461
2018-05-09 23:27:21,263 [salt.state       ][INFO    ][31616] Executing state file.symlink for /etc/apache2/sites-enabled/keystone_wsgi.conf
2018-05-09 23:27:21,265 [salt.state       ][INFO    ][31616] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2018-05-09 23:27:21,265 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 23:27:21.265602 duration_in_ms=2.141
2018-05-09 23:27:21,269 [salt.state       ][INFO    ][31616] Running state [apache2] at time 23:27:21.269926
2018-05-09 23:27:21,270 [salt.state       ][INFO    ][31616] Executing state service.running for apache2
2018-05-09 23:27:21,270 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-05-09 23:27:21,314 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:27:21,331 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:27:21,353 [salt.state       ][INFO    ][31616] The service apache2 is already running
2018-05-09 23:27:21,353 [salt.state       ][INFO    ][31616] Completed state [apache2] at time 23:27:21.353729 duration_in_ms=83.8
2018-05-09 23:27:21,355 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/conf-enabled/security.conf] at time 23:27:21.355641
2018-05-09 23:27:21,356 [salt.state       ][INFO    ][31616] Executing state file.symlink for /etc/apache2/conf-enabled/security.conf
2018-05-09 23:27:21,359 [salt.state       ][INFO    ][31616] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-05-09 23:27:21,359 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/conf-enabled/security.conf] at time 23:27:21.359734 duration_in_ms=4.092
2018-05-09 23:27:21,360 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 23:27:21.360105
2018-05-09 23:27:21,360 [salt.state       ][INFO    ][31616] Executing state file.absent for /etc/apache2/sites-enabled/keystone_wsgi
2018-05-09 23:27:21,361 [salt.state       ][INFO    ][31616] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2018-05-09 23:27:21,362 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 23:27:21.361946 duration_in_ms=1.841
2018-05-09 23:27:21,365 [salt.state       ][INFO    ][31616] Running state [cinder] at time 23:27:21.365541
2018-05-09 23:27:21,365 [salt.state       ][INFO    ][31616] Executing state group.present for cinder
2018-05-09 23:27:21,367 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['groupadd', '-g 304', '-r', 'cinder'] in directory '/root'
2018-05-09 23:27:21,397 [salt.state       ][INFO    ][31616] {'passwd': 'x', 'gid': 304, 'name': 'cinder', 'members': []}
2018-05-09 23:27:21,398 [salt.state       ][INFO    ][31616] Completed state [cinder] at time 23:27:21.398831 duration_in_ms=33.288
2018-05-09 23:27:21,399 [salt.state       ][INFO    ][31616] Running state [cinder] at time 23:27:21.399862
2018-05-09 23:27:21,400 [salt.state       ][INFO    ][31616] Executing state user.present for cinder
2018-05-09 23:27:21,401 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['useradd', '-s', '/bin/false', '-u', '304', '-g', '304', '-m', '-d', '/var/lib/cinder', '-r', 'cinder'] in directory '/root'
2018-05-09 23:27:21,439 [salt.state       ][INFO    ][31616] {'shell': '/bin/false', 'workphone': '', 'uid': 304, 'passwd': 'x', 'roomnumber': '', 'groups': ['cinder'], 'home': '/var/lib/cinder', 'name': 'cinder', 'gid': 304, 'fullname': '', 'homephone': ''}
2018-05-09 23:27:21,440 [salt.state       ][INFO    ][31616] Completed state [cinder] at time 23:27:21.440069 duration_in_ms=40.207
2018-05-09 23:27:21,442 [salt.state       ][INFO    ][31616] Running state [cinder-api] at time 23:27:21.442297
2018-05-09 23:27:21,443 [salt.state       ][INFO    ][31616] Executing state pkg.installed for cinder-api
2018-05-09 23:27:21,467 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['apt-cache', '-q', 'policy', 'cinder-api'] in directory '/root'
2018-05-09 23:27:21,540 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:27:24,086 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:27:24,125 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'cinder-api'] in directory '/root'
2018-05-09 23:27:25,742 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232725727864
2018-05-09 23:27:25,769 [salt.minion      ][INFO    ][32049] Starting a new job with PID 32049
2018-05-09 23:27:25,790 [salt.minion      ][INFO    ][32049] Returning information for job: 20180509232725727864
2018-05-09 23:27:33,477 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:27:33,542 [salt.state       ][INFO    ][31616] Made the following changes:
'python-oslo.vmware' changed from 'absent' to '2.23.0-0ubuntu1~cloud0'
'cinder-api' changed from 'absent' to '2:11.1.0-0ubuntu1~cloud0'
'python-suds' changed from 'absent' to '0.7~git20150727.94664dd-3'
'python-cinder' changed from 'absent' to '2:11.1.0-0ubuntu1~cloud0'
'cinder-common' changed from 'absent' to '2:11.1.0-0ubuntu1~cloud0'

2018-05-09 23:27:33,571 [salt.state       ][INFO    ][31616] Loading fresh modules for state activity
2018-05-09 23:27:33,609 [salt.state       ][INFO    ][31616] Completed state [cinder-api] at time 23:27:33.609278 duration_in_ms=12166.981
2018-05-09 23:27:33,622 [salt.state       ][INFO    ][31616] Running state [cinder-scheduler] at time 23:27:33.622032
2018-05-09 23:27:33,622 [salt.state       ][INFO    ][31616] Executing state pkg.installed for cinder-scheduler
2018-05-09 23:27:34,053 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:27:34,089 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'cinder-scheduler'] in directory '/root'
2018-05-09 23:27:35,756 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232735751771
2018-05-09 23:27:35,780 [salt.minion      ][INFO    ][676] Starting a new job with PID 676
2018-05-09 23:27:35,801 [salt.minion      ][INFO    ][676] Returning information for job: 20180509232735751771
2018-05-09 23:27:37,339 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:27:37,401 [salt.state       ][INFO    ][31616] Made the following changes:
'cinder-scheduler' changed from 'absent' to '2:11.1.0-0ubuntu1~cloud0'

2018-05-09 23:27:37,442 [salt.state       ][INFO    ][31616] Loading fresh modules for state activity
2018-05-09 23:27:37,488 [salt.state       ][INFO    ][31616] Completed state [cinder-scheduler] at time 23:27:37.488885 duration_in_ms=3866.849
2018-05-09 23:27:37,510 [salt.state       ][INFO    ][31616] Running state [lvm2] at time 23:27:37.510110
2018-05-09 23:27:37,518 [salt.state       ][INFO    ][31616] Executing state pkg.installed for lvm2
2018-05-09 23:27:38,231 [salt.state       ][INFO    ][31616] All specified packages are already installed
2018-05-09 23:27:38,231 [salt.state       ][INFO    ][31616] Completed state [lvm2] at time 23:27:38.231917 duration_in_ms=721.806
2018-05-09 23:27:38,232 [salt.state       ][INFO    ][31616] Running state [python-cinder] at time 23:27:38.232613
2018-05-09 23:27:38,233 [salt.state       ][INFO    ][31616] Executing state pkg.installed for python-cinder
2018-05-09 23:27:38,239 [salt.state       ][INFO    ][31616] All specified packages are already installed
2018-05-09 23:27:38,250 [salt.state       ][INFO    ][31616] Completed state [python-cinder] at time 23:27:38.250456 duration_in_ms=17.843
2018-05-09 23:27:38,251 [salt.state       ][INFO    ][31616] Running state [gettext-base] at time 23:27:38.251100
2018-05-09 23:27:38,251 [salt.state       ][INFO    ][31616] Executing state pkg.installed for gettext-base
2018-05-09 23:27:38,258 [salt.state       ][INFO    ][31616] All specified packages are already installed
2018-05-09 23:27:38,262 [salt.state       ][INFO    ][31616] Completed state [gettext-base] at time 23:27:38.262037 duration_in_ms=10.936
2018-05-09 23:27:38,270 [salt.state       ][INFO    ][31616] Running state [python-memcache] at time 23:27:38.270666
2018-05-09 23:27:38,271 [salt.state       ][INFO    ][31616] Executing state pkg.installed for python-memcache
2018-05-09 23:27:38,278 [salt.state       ][INFO    ][31616] All specified packages are already installed
2018-05-09 23:27:38,278 [salt.state       ][INFO    ][31616] Completed state [python-memcache] at time 23:27:38.278712 duration_in_ms=8.046
2018-05-09 23:27:38,279 [salt.state       ][INFO    ][31616] Running state [python-pycadf] at time 23:27:38.279349
2018-05-09 23:27:38,286 [salt.state       ][INFO    ][31616] Executing state pkg.installed for python-pycadf
2018-05-09 23:27:38,293 [salt.state       ][INFO    ][31616] All specified packages are already installed
2018-05-09 23:27:38,293 [salt.state       ][INFO    ][31616] Completed state [python-pycadf] at time 23:27:38.293594 duration_in_ms=14.245
2018-05-09 23:27:38,304 [salt.state       ][INFO    ][31616] Running state [/etc/cinder/cinder.conf] at time 23:27:38.304340
2018-05-09 23:27:38,304 [salt.state       ][INFO    ][31616] Executing state file.managed for /etc/cinder/cinder.conf
2018-05-09 23:27:38,320 [salt.fileclient  ][INFO    ][31616] Fetching file from saltenv 'base', ** done ** 'cinder/files/pike/cinder.conf.controller.Debian'
2018-05-09 23:27:38,452 [salt.fileclient  ][INFO    ][31616] Fetching file from saltenv 'base', ** done ** 'cinder/files/backend/_lvm.conf'
2018-05-09 23:27:38,456 [salt.state       ][INFO    ][31616] File changed:
--- 
+++ 
@@ -1,15 +1,159 @@
+
+
 [DEFAULT]
 rootwrap_config = /etc/cinder/rootwrap.conf
 api_paste_confg = /etc/cinder/api-paste.ini
+
 iscsi_helper = tgtadm
 volume_name_template = volume-%s
-volume_group = cinder-volumes
+#volume_group = cinder
+
 verbose = True
+
+osapi_volume_workers = 4
+
 auth_strategy = keystone
+
 state_path = /var/lib/cinder
-lock_path = /var/lock/cinder
+
+use_syslog=False
+
+glance_num_retries=0
+debug=False
+
+os_region_name=RegionOne
+allow_availability_zone_fallback = True
+
+#glance_api_ssl_compression=False
+#glance_api_insecure=False
+
+osapi_volume_listen=172.16.10.36
+
+glance_api_servers = http://172.16.10.36:9292
+
+
+glance_host=172.16.10.36
+glance_port=9292
+glance_api_version=2
+
+enable_v3_api = True
+
+os_privileged_user_name=cinder
+os_privileged_user_password=opnfv_secret
+os_privileged_user_tenant=service
+os_privileged_user_auth_url=http://172.16.10.36:5000/v3/
+
+volume_backend_name=DEFAULT
+
+default_volume_type=lvm-driver
+
+enabled_backends=lvm-driver
+
+# Enables the Force option on upload_to_image. This enables running
+# upload_volume on in-use volumes for backends that support it. (boolean value)
+#enable_force_upload = false
+enable_force_upload = false
+
+#RPC response timeout recommended by Hitachi
+rpc_response_timeout=3600
+
+#Rabbit
+control_exchange=cinder
+
+
+volume_clear=none
+
+
+
+volume_name_template = volume-%s
+
+#volume_group = vg_cinder_volume
+
 volumes_dir = /var/lib/cinder/volumes
-enabled_backends = lvm
+log_dir=/var/log/cinder
+
+# Use syslog for logging. (boolean value)
+#use_syslog=false
+
+use_syslog=false
+verbose=True
+lock_path=/var/lock/cinder
+
+nova_catalog_admin_info = compute:nova:adminURL
+nova_catalog_info = compute:nova:internalURL
+
+osapi_volume_extension = cinder.api.contrib.standard_extensions
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
+
+[oslo_messaging_notifications]
+driver = messagingv2
+
+[oslo_concurrency]
+
+lock_path=/var/lock/cinder
+
+[oslo_middleware]
+
+enable_proxy_headers_parsing = True
+
+
+[keystone_authtoken]
+signing_dir=/tmp/keystone-signing-cinder
+revocation_cache_time = 10
+auth_type = password
+user_domain_name = Default
+project_domain_name = Default
+project_name = service
+username = cinder
+password = opnfv_secret
+
+auth_uri=http://172.16.10.36:5000
+auth_url=http://172.16.10.36:35357
+
+# Temporary disabled for backward compataiblity
+#auth_uri=http://172.16.10.36/identity
+#auth_url=http://172.16.10.36/identity_v2_admin
+auth_version = v3
 
 [database]
-connection = sqlite:////var/lib/cinder/cinder.sqlite
+idle_timeout=3600
+max_pool_size=30
+max_retries=-1
+max_overflow=40
+connection = mysql+pymysql://cinder:opnfv_secret@172.16.10.36/cinder?charset=utf8
+[lvm-driver]
+host=ctl01
+volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
+volume_backend_name=lvm-driver
+lvm_type = default
+iscsi_helper = tgtadm
+volume_group = cinder-volume
+
+[cors]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain
+# received in the requests "origin" header. (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials
+# (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to
+# HTTP Simple Headers. (list value)
+#expose_headers = X-Image-Meta-Checksum,X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list
+# value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual
+# request. (list value)
+#allow_headers = Content-MD5,X-Image-Meta-Checksum,X-Storage-Token,Accept-Encoding,X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID

2018-05-09 23:27:38,468 [salt.state       ][INFO    ][31616] Completed state [/etc/cinder/cinder.conf] at time 23:27:38.467952 duration_in_ms=163.612
2018-05-09 23:27:38,468 [salt.state       ][INFO    ][31616] Running state [/etc/cinder/api-paste.ini] at time 23:27:38.468774
2018-05-09 23:27:38,469 [salt.state       ][INFO    ][31616] Executing state file.managed for /etc/cinder/api-paste.ini
2018-05-09 23:27:38,493 [salt.fileclient  ][INFO    ][31616] Fetching file from saltenv 'base', ** done ** 'cinder/files/pike/api-paste.ini.controller.Debian'
2018-05-09 23:27:38,551 [salt.state       ][INFO    ][31616] File changed:
--- 
+++ 
@@ -73,3 +73,4 @@
 
 [filter:authtoken]
 paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+

2018-05-09 23:27:38,553 [salt.state       ][INFO    ][31616] Completed state [/etc/cinder/api-paste.ini] at time 23:27:38.553200 duration_in_ms=84.425
2018-05-09 23:27:38,554 [salt.state       ][INFO    ][31616] Running state [/etc/default/cinder-scheduler] at time 23:27:38.554229
2018-05-09 23:27:38,554 [salt.state       ][INFO    ][31616] Executing state file.managed for /etc/default/cinder-scheduler
2018-05-09 23:27:38,568 [salt.fileclient  ][INFO    ][31616] Fetching file from saltenv 'base', ** done ** 'cinder/files/default'
2018-05-09 23:27:38,572 [salt.state       ][INFO    ][31616] File changed:
New file
2018-05-09 23:27:38,573 [salt.state       ][INFO    ][31616] Completed state [/etc/default/cinder-scheduler] at time 23:27:38.573279 duration_in_ms=19.05
2018-05-09 23:27:38,574 [salt.state       ][INFO    ][31616] Running state [cinder-manage db sync; sleep 5;] at time 23:27:38.574767
2018-05-09 23:27:38,575 [salt.state       ][INFO    ][31616] Executing state cmd.run for cinder-manage db sync; sleep 5;
2018-05-09 23:27:38,575 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command 'cinder-manage db sync; sleep 5;' in directory '/root'
2018-05-09 23:27:45,981 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232745971283
2018-05-09 23:27:46,000 [salt.minion      ][INFO    ][918] Starting a new job with PID 918
2018-05-09 23:27:46,060 [salt.minion      ][INFO    ][918] Returning information for job: 20180509232745971283
2018-05-09 23:27:47,499 [salt.state       ][INFO    ][31616] {'pid': 878, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:27:47,500 [salt.state       ][INFO    ][31616] Completed state [cinder-manage db sync; sleep 5;] at time 23:27:47.500769 duration_in_ms=8926.0
2018-05-09 23:27:47,502 [salt.state       ][INFO    ][31616] Running state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 23:27:47.502468
2018-05-09 23:27:47,503 [salt.state       ][INFO    ][31616] Executing state file.managed for /etc/apache2/conf-available/cinder-wsgi.conf
2018-05-09 23:27:47,527 [salt.fileclient  ][INFO    ][31616] Fetching file from saltenv 'base', ** done ** 'cinder/files/pike/cinder-wsgi.conf'
2018-05-09 23:27:47,583 [salt.state       ][INFO    ][31616] File changed:
--- 
+++ 
@@ -1,7 +1,7 @@
-Listen 8776
-LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-agent}i\" %D(us)" cinder_combined
 
-<VirtualHost *:8776>
+Listen 172.16.10.36:8776
+
+<VirtualHost 172.16.10.36:8776>
     WSGIDaemonProcess cinder-wsgi processes=5 threads=1 user=cinder group=cinder display-name=%{GROUP}
     WSGIProcessGroup cinder-wsgi
     WSGIScriptAlias / /usr/bin/cinder-wsgi
@@ -12,10 +12,10 @@
     </IfVersion>
 
     ErrorLog /var/log/apache2/cinder_error.log
-    CustomLog /var/log/apache2/cinder.log cinder_combined
+    CustomLog /var/log/apache2/cinder.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 
     <Directory /usr/bin>
-	<IfVersion >= 2.4>
+        <IfVersion >= 2.4>
             Require all granted
         </IfVersion>
         <IfVersion < 2.4>

2018-05-09 23:27:47,587 [salt.state       ][INFO    ][31616] Completed state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 23:27:47.587744 duration_in_ms=85.276
2018-05-09 23:27:47,590 [salt.state       ][INFO    ][31616] Running state [cinder-wsgi] at time 23:27:47.590252
2018-05-09 23:27:47,590 [salt.state       ][INFO    ][31616] Executing state apache_conf.enabled for cinder-wsgi
2018-05-09 23:27:47,591 [salt.state       ][INFO    ][31616] cinder-wsgi already enabled.
2018-05-09 23:27:47,591 [salt.state       ][INFO    ][31616] Completed state [cinder-wsgi] at time 23:27:47.591705 duration_in_ms=1.453
2018-05-09 23:27:47,592 [salt.state       ][INFO    ][31616] Running state [cinder-api] at time 23:27:47.592881
2018-05-09 23:27:47,593 [salt.state       ][INFO    ][31616] Executing state service.dead for cinder-api
2018-05-09 23:27:47,594 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'status', 'cinder-api.service', '-n', '0'] in directory '/root'
2018-05-09 23:27:47,614 [salt.state       ][INFO    ][31616] The named service cinder-api is not available
2018-05-09 23:27:47,616 [salt.state       ][INFO    ][31616] Completed state [cinder-api] at time 23:27:47.616054 duration_in_ms=23.171
2018-05-09 23:27:47,622 [salt.state       ][INFO    ][31616] Running state [apache2] at time 23:27:47.622280
2018-05-09 23:27:47,623 [salt.state       ][INFO    ][31616] Executing state service.running for apache2
2018-05-09 23:27:47,624 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:27:47,640 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:27:47,661 [salt.state       ][INFO    ][31616] The service apache2 is already running
2018-05-09 23:27:47,663 [salt.state       ][INFO    ][31616] Completed state [apache2] at time 23:27:47.663014 duration_in_ms=40.733
2018-05-09 23:27:47,663 [salt.state       ][INFO    ][31616] Running state [apache2] at time 23:27:47.663899
2018-05-09 23:27:47,664 [salt.state       ][INFO    ][31616] Executing state service.mod_watch for apache2
2018-05-09 23:27:47,666 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:27:47,686 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:27:47,706 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-05-09 23:27:51,991 [salt.state       ][INFO    ][31616] {'apache2': True}
2018-05-09 23:27:51,992 [salt.state       ][INFO    ][31616] Completed state [apache2] at time 23:27:51.992588 duration_in_ms=4328.688
2018-05-09 23:27:51,996 [salt.state       ][INFO    ][31616] Running state [cinder-scheduler] at time 23:27:51.996430
2018-05-09 23:27:51,996 [salt.state       ][INFO    ][31616] Executing state service.running for cinder-scheduler
2018-05-09 23:27:51,997 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'status', 'cinder-scheduler.service', '-n', '0'] in directory '/root'
2018-05-09 23:27:52,024 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2018-05-09 23:27:52,045 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'is-enabled', 'cinder-scheduler.service'] in directory '/root'
2018-05-09 23:27:52,066 [salt.state       ][INFO    ][31616] The service cinder-scheduler is already running
2018-05-09 23:27:52,067 [salt.state       ][INFO    ][31616] Completed state [cinder-scheduler] at time 23:27:52.067059 duration_in_ms=70.628
2018-05-09 23:27:52,067 [salt.state       ][INFO    ][31616] Running state [cinder-scheduler] at time 23:27:52.067583
2018-05-09 23:27:52,068 [salt.state       ][INFO    ][31616] Executing state service.mod_watch for cinder-scheduler
2018-05-09 23:27:52,069 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2018-05-09 23:27:52,088 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemctl', 'is-enabled', 'cinder-scheduler.service'] in directory '/root'
2018-05-09 23:27:52,111 [salt.loaded.int.module.cmdmod][INFO    ][31616] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'cinder-scheduler.service'] in directory '/root'
2018-05-09 23:27:56,021 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232756012955
2018-05-09 23:27:56,041 [salt.minion      ][INFO    ][1290] Starting a new job with PID 1290
2018-05-09 23:27:56,107 [salt.minion      ][INFO    ][1290] Returning information for job: 20180509232756012955
2018-05-09 23:27:57,542 [salt.state       ][INFO    ][31616] {'cinder-scheduler': True}
2018-05-09 23:27:57,542 [salt.state       ][INFO    ][31616] Completed state [cinder-scheduler] at time 23:27:57.542847 duration_in_ms=5475.264
2018-05-09 23:27:57,550 [salt.state       ][INFO    ][31616] Running state [lvm-driver] at time 23:27:57.549960
2018-05-09 23:27:57,550 [salt.state       ][INFO    ][31616] Executing state cinderng.volume_type_present for lvm-driver
2018-05-09 23:28:06,074 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232806065803
2018-05-09 23:28:06,133 [salt.minion      ][INFO    ][1385] Starting a new job with PID 1385
2018-05-09 23:28:06,151 [salt.minion      ][INFO    ][1385] Returning information for job: 20180509232806065803
2018-05-09 23:28:16,111 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232816106616
2018-05-09 23:28:16,126 [salt.minion      ][INFO    ][1417] Starting a new job with PID 1417
2018-05-09 23:28:16,147 [salt.minion      ][INFO    ][1417] Returning information for job: 20180509232816106616
2018-05-09 23:28:26,327 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232826318280
2018-05-09 23:28:26,348 [salt.minion      ][INFO    ][1440] Starting a new job with PID 1440
2018-05-09 23:28:26,383 [salt.minion      ][INFO    ][1440] Returning information for job: 20180509232826318280
2018-05-09 23:28:34,999 [salt.state       ][INFO    ][31616] Volume type "lvm-driver" already exists
2018-05-09 23:28:34,999 [salt.state       ][INFO    ][31616] Completed state [lvm-driver] at time 23:28:34.999759 duration_in_ms=37449.799
2018-05-09 23:28:35,000 [salt.state       ][INFO    ][31616] Running state [lvm-driver] at time 23:28:35.000663
2018-05-09 23:28:35,001 [salt.state       ][INFO    ][31616] Executing state cinderng.volume_type_key_present for lvm-driver
2018-05-09 23:28:36,342 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232836334235
2018-05-09 23:28:36,357 [salt.minion      ][INFO    ][1453] Starting a new job with PID 1453
2018-05-09 23:28:36,383 [salt.minion      ][INFO    ][1453] Returning information for job: 20180509232836334235
2018-05-09 23:28:46,568 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232846559764
2018-05-09 23:28:46,592 [salt.minion      ][INFO    ][1461] Starting a new job with PID 1461
2018-05-09 23:28:46,613 [salt.minion      ][INFO    ][1461] Returning information for job: 20180509232846559764
2018-05-09 23:28:56,777 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232856771601
2018-05-09 23:28:56,805 [salt.minion      ][INFO    ][1478] Starting a new job with PID 1478
2018-05-09 23:28:56,828 [salt.minion      ][INFO    ][1478] Returning information for job: 20180509232856771601
2018-05-09 23:29:06,803 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232906794887
2018-05-09 23:29:06,825 [salt.minion      ][INFO    ][1487] Starting a new job with PID 1487
2018-05-09 23:29:06,848 [salt.minion      ][INFO    ][1487] Returning information for job: 20180509232906794887
2018-05-09 23:29:16,826 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232916817136
2018-05-09 23:29:16,848 [salt.minion      ][INFO    ][1498] Starting a new job with PID 1498
2018-05-09 23:29:16,868 [salt.minion      ][INFO    ][1498] Returning information for job: 20180509232916817136
2018-05-09 23:29:26,844 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232926835903
2018-05-09 23:29:26,867 [salt.minion      ][INFO    ][1505] Starting a new job with PID 1505
2018-05-09 23:29:26,891 [salt.minion      ][INFO    ][1505] Returning information for job: 20180509232926835903
2018-05-09 23:29:36,865 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232936858901
2018-05-09 23:29:36,887 [salt.minion      ][INFO    ][1512] Starting a new job with PID 1512
2018-05-09 23:29:36,909 [salt.minion      ][INFO    ][1512] Returning information for job: 20180509232936858901
2018-05-09 23:29:46,201 [salt.state       ][INFO    ][31616] Volume type keys "{u'volume_backend_name': u'lvm-driver'}" in volume type "lvm-driver" already exist
2018-05-09 23:29:46,202 [salt.state       ][INFO    ][31616] Completed state [lvm-driver] at time 23:29:46.202080 duration_in_ms=71201.416
2018-05-09 23:29:46,204 [salt.minion      ][INFO    ][31616] Returning information for job: 20180509232715609355
2018-05-09 23:29:46,939 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509232946930880
2018-05-09 23:29:46,963 [salt.minion      ][INFO    ][1522] Starting a new job with PID 1522
2018-05-09 23:29:49,822 [salt.state       ][INFO    ][1522] Loading fresh modules for state activity
2018-05-09 23:29:52,182 [salt.state       ][INFO    ][1522] Running state [apache2] at time 23:29:52.182391
2018-05-09 23:29:52,183 [salt.state       ][INFO    ][1522] Executing state pkg.installed for apache2
2018-05-09 23:29:52,183 [salt.loaded.int.module.cmdmod][INFO    ][1522] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:29:52,570 [salt.state       ][INFO    ][1522] All specified packages are already installed
2018-05-09 23:29:52,571 [salt.state       ][INFO    ][1522] Completed state [apache2] at time 23:29:52.571372 duration_in_ms=388.982
2018-05-09 23:29:52,572 [salt.state       ][INFO    ][1522] Running state [a2enmod ssl] at time 23:29:52.572292
2018-05-09 23:29:52,572 [salt.state       ][INFO    ][1522] Executing state cmd.run for a2enmod ssl
2018-05-09 23:29:52,573 [salt.state       ][INFO    ][1522] /etc/apache2/mods-enabled/ssl.load exists
2018-05-09 23:29:52,573 [salt.state       ][INFO    ][1522] Completed state [a2enmod ssl] at time 23:29:52.573828 duration_in_ms=1.535
2018-05-09 23:29:52,574 [salt.state       ][INFO    ][1522] Running state [a2enmod rewrite] at time 23:29:52.574560
2018-05-09 23:29:52,575 [salt.state       ][INFO    ][1522] Executing state cmd.run for a2enmod rewrite
2018-05-09 23:29:52,575 [salt.state       ][INFO    ][1522] /etc/apache2/mods-enabled/rewrite.load exists
2018-05-09 23:29:52,575 [salt.state       ][INFO    ][1522] Completed state [a2enmod rewrite] at time 23:29:52.575931 duration_in_ms=1.371
2018-05-09 23:29:52,576 [salt.state       ][INFO    ][1522] Running state [libapache2-mod-wsgi] at time 23:29:52.576622
2018-05-09 23:29:52,577 [salt.state       ][INFO    ][1522] Executing state pkg.installed for libapache2-mod-wsgi
2018-05-09 23:29:52,584 [salt.state       ][INFO    ][1522] All specified packages are already installed
2018-05-09 23:29:52,584 [salt.state       ][INFO    ][1522] Completed state [libapache2-mod-wsgi] at time 23:29:52.584739 duration_in_ms=8.117
2018-05-09 23:29:52,585 [salt.state       ][INFO    ][1522] Running state [a2enmod wsgi] at time 23:29:52.585440
2018-05-09 23:29:52,585 [salt.state       ][INFO    ][1522] Executing state cmd.run for a2enmod wsgi
2018-05-09 23:29:52,586 [salt.state       ][INFO    ][1522] /etc/apache2/mods-enabled/wsgi.load exists
2018-05-09 23:29:52,586 [salt.state       ][INFO    ][1522] Completed state [a2enmod wsgi] at time 23:29:52.586844 duration_in_ms=1.404
2018-05-09 23:29:52,590 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 23:29:52.590453
2018-05-09 23:29:52,591 [salt.state       ][INFO    ][1522] Executing state file.absent for /etc/apache2/mods-enabled/mpm_prefork.load
2018-05-09 23:29:52,592 [salt.state       ][INFO    ][1522] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2018-05-09 23:29:52,592 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 23:29:52.592466 duration_in_ms=2.013
2018-05-09 23:29:52,592 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 23:29:52.592905
2018-05-09 23:29:52,593 [salt.state       ][INFO    ][1522] Executing state file.absent for /etc/apache2/mods-enabled/mpm_prefork.conf
2018-05-09 23:29:52,593 [salt.state       ][INFO    ][1522] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2018-05-09 23:29:52,594 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 23:29:52.594226 duration_in_ms=1.32
2018-05-09 23:29:52,594 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:29:52.594679
2018-05-09 23:29:52,595 [salt.state       ][INFO    ][1522] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.load
2018-05-09 23:29:52,595 [salt.state       ][INFO    ][1522] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-05-09 23:29:52,596 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 23:29:52.595982 duration_in_ms=1.303
2018-05-09 23:29:52,596 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:29:52.596427
2018-05-09 23:29:52,596 [salt.state       ][INFO    ][1522] Executing state file.absent for /etc/apache2/mods-enabled/mpm_worker.conf
2018-05-09 23:29:52,597 [salt.state       ][INFO    ][1522] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-05-09 23:29:52,597 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 23:29:52.597734 duration_in_ms=1.307
2018-05-09 23:29:52,601 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 23:29:52.601041
2018-05-09 23:29:52,601 [salt.state       ][INFO    ][1522] Executing state file.managed for /etc/apache2/mods-available/mpm_event.conf
2018-05-09 23:29:52,708 [salt.state       ][INFO    ][1522] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2018-05-09 23:29:52,709 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 23:29:52.709528 duration_in_ms=108.486
2018-05-09 23:29:52,710 [salt.state       ][INFO    ][1522] Running state [a2enmod mpm_event] at time 23:29:52.710690
2018-05-09 23:29:52,711 [salt.state       ][INFO    ][1522] Executing state cmd.run for a2enmod mpm_event
2018-05-09 23:29:52,712 [salt.state       ][INFO    ][1522] /etc/apache2/mods-enabled/mpm_event.load exists
2018-05-09 23:29:52,712 [salt.state       ][INFO    ][1522] Completed state [a2enmod mpm_event] at time 23:29:52.712394 duration_in_ms=1.704
2018-05-09 23:29:52,713 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/ports.conf] at time 23:29:52.713076
2018-05-09 23:29:52,713 [salt.state       ][INFO    ][1522] Executing state file.managed for /etc/apache2/ports.conf
2018-05-09 23:29:52,783 [salt.state       ][INFO    ][1522] File /etc/apache2/ports.conf is in the correct state
2018-05-09 23:29:52,784 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/ports.conf] at time 23:29:52.784160 duration_in_ms=71.083
2018-05-09 23:29:52,784 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/conf-available/security.conf] at time 23:29:52.784850
2018-05-09 23:29:52,785 [salt.state       ][INFO    ][1522] Executing state file.managed for /etc/apache2/conf-available/security.conf
2018-05-09 23:29:52,857 [salt.state       ][INFO    ][1522] File /etc/apache2/conf-available/security.conf is in the correct state
2018-05-09 23:29:52,858 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/conf-available/security.conf] at time 23:29:52.858287 duration_in_ms=73.436
2018-05-09 23:29:52,868 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 23:29:52.868670
2018-05-09 23:29:52,869 [salt.state       ][INFO    ][1522] Executing state file.managed for /etc/apache2/sites-available/keystone_wsgi.conf
2018-05-09 23:29:53,219 [salt.state       ][INFO    ][1522] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2018-05-09 23:29:53,220 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 23:29:53.219951 duration_in_ms=351.281
2018-05-09 23:29:53,221 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 23:29:53.221276
2018-05-09 23:29:53,222 [salt.state       ][INFO    ][1522] Executing state file.symlink for /etc/apache2/sites-enabled/keystone_wsgi.conf
2018-05-09 23:29:53,223 [salt.state       ][INFO    ][1522] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2018-05-09 23:29:53,224 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 23:29:53.224174 duration_in_ms=2.898
2018-05-09 23:29:53,224 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 23:29:53.224625
2018-05-09 23:29:53,225 [salt.state       ][INFO    ][1522] Executing state file.absent for /etc/apache2/sites-enabled/000-default.conf
2018-05-09 23:29:53,225 [salt.state       ][INFO    ][1522] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-05-09 23:29:53,225 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 23:29:53.225952 duration_in_ms=1.327
2018-05-09 23:29:53,228 [salt.state       ][INFO    ][1522] Running state [apache2] at time 23:29:53.228751
2018-05-09 23:29:53,229 [salt.state       ][INFO    ][1522] Executing state service.running for apache2
2018-05-09 23:29:53,229 [salt.loaded.int.module.cmdmod][INFO    ][1522] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-05-09 23:29:53,257 [salt.loaded.int.module.cmdmod][INFO    ][1522] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:29:53,271 [salt.loaded.int.module.cmdmod][INFO    ][1522] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:29:53,287 [salt.state       ][INFO    ][1522] The service apache2 is already running
2018-05-09 23:29:53,289 [salt.state       ][INFO    ][1522] Completed state [apache2] at time 23:29:53.289090 duration_in_ms=60.337
2018-05-09 23:29:53,291 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/conf-enabled/security.conf] at time 23:29:53.291244
2018-05-09 23:29:53,291 [salt.state       ][INFO    ][1522] Executing state file.symlink for /etc/apache2/conf-enabled/security.conf
2018-05-09 23:29:53,293 [salt.state       ][INFO    ][1522] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-05-09 23:29:53,294 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/conf-enabled/security.conf] at time 23:29:53.294325 duration_in_ms=3.081
2018-05-09 23:29:53,295 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 23:29:53.295119
2018-05-09 23:29:53,295 [salt.state       ][INFO    ][1522] Executing state file.absent for /etc/apache2/sites-enabled/keystone_wsgi
2018-05-09 23:29:53,296 [salt.state       ][INFO    ][1522] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2018-05-09 23:29:53,297 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 23:29:53.297110 duration_in_ms=1.991
2018-05-09 23:29:53,297 [salt.state       ][INFO    ][1522] Running state [cinder-api] at time 23:29:53.297555
2018-05-09 23:29:53,298 [salt.state       ][INFO    ][1522] Executing state pkg.installed for cinder-api
2018-05-09 23:29:53,307 [salt.state       ][INFO    ][1522] All specified packages are already installed
2018-05-09 23:29:53,308 [salt.state       ][INFO    ][1522] Completed state [cinder-api] at time 23:29:53.308605 duration_in_ms=11.05
2018-05-09 23:29:53,309 [salt.state       ][INFO    ][1522] Running state [cinder-scheduler] at time 23:29:53.309061
2018-05-09 23:29:53,309 [salt.state       ][INFO    ][1522] Executing state pkg.installed for cinder-scheduler
2018-05-09 23:29:53,318 [salt.state       ][INFO    ][1522] All specified packages are already installed
2018-05-09 23:29:53,318 [salt.state       ][INFO    ][1522] Completed state [cinder-scheduler] at time 23:29:53.318814 duration_in_ms=9.753
2018-05-09 23:29:53,319 [salt.state       ][INFO    ][1522] Running state [lvm2] at time 23:29:53.319263
2018-05-09 23:29:53,319 [salt.state       ][INFO    ][1522] Executing state pkg.installed for lvm2
2018-05-09 23:29:53,327 [salt.state       ][INFO    ][1522] All specified packages are already installed
2018-05-09 23:29:53,328 [salt.state       ][INFO    ][1522] Completed state [lvm2] at time 23:29:53.328777 duration_in_ms=9.514
2018-05-09 23:29:53,329 [salt.state       ][INFO    ][1522] Running state [python-cinder] at time 23:29:53.329232
2018-05-09 23:29:53,329 [salt.state       ][INFO    ][1522] Executing state pkg.installed for python-cinder
2018-05-09 23:29:53,338 [salt.state       ][INFO    ][1522] All specified packages are already installed
2018-05-09 23:29:53,338 [salt.state       ][INFO    ][1522] Completed state [python-cinder] at time 23:29:53.338749 duration_in_ms=9.517
2018-05-09 23:29:53,339 [salt.state       ][INFO    ][1522] Running state [gettext-base] at time 23:29:53.339196
2018-05-09 23:29:53,339 [salt.state       ][INFO    ][1522] Executing state pkg.installed for gettext-base
2018-05-09 23:29:53,348 [salt.state       ][INFO    ][1522] All specified packages are already installed
2018-05-09 23:29:53,348 [salt.state       ][INFO    ][1522] Completed state [gettext-base] at time 23:29:53.348842 duration_in_ms=9.646
2018-05-09 23:29:53,349 [salt.state       ][INFO    ][1522] Running state [python-memcache] at time 23:29:53.349287
2018-05-09 23:29:53,349 [salt.state       ][INFO    ][1522] Executing state pkg.installed for python-memcache
2018-05-09 23:29:53,358 [salt.state       ][INFO    ][1522] All specified packages are already installed
2018-05-09 23:29:53,358 [salt.state       ][INFO    ][1522] Completed state [python-memcache] at time 23:29:53.358511 duration_in_ms=9.224
2018-05-09 23:29:53,359 [salt.state       ][INFO    ][1522] Running state [python-pycadf] at time 23:29:53.358964
2018-05-09 23:29:53,359 [salt.state       ][INFO    ][1522] Executing state pkg.installed for python-pycadf
2018-05-09 23:29:53,368 [salt.state       ][INFO    ][1522] All specified packages are already installed
2018-05-09 23:29:53,369 [salt.state       ][INFO    ][1522] Completed state [python-pycadf] at time 23:29:53.368980 duration_in_ms=10.016
2018-05-09 23:29:53,370 [salt.state       ][INFO    ][1522] Running state [/etc/cinder/cinder.conf] at time 23:29:53.369966
2018-05-09 23:29:53,370 [salt.state       ][INFO    ][1522] Executing state file.managed for /etc/cinder/cinder.conf
2018-05-09 23:29:53,525 [salt.state       ][INFO    ][1522] File /etc/cinder/cinder.conf is in the correct state
2018-05-09 23:29:53,526 [salt.state       ][INFO    ][1522] Completed state [/etc/cinder/cinder.conf] at time 23:29:53.526727 duration_in_ms=156.76
2018-05-09 23:29:53,527 [salt.state       ][INFO    ][1522] Running state [/etc/cinder/api-paste.ini] at time 23:29:53.527301
2018-05-09 23:29:53,527 [salt.state       ][INFO    ][1522] Executing state file.managed for /etc/cinder/api-paste.ini
2018-05-09 23:29:53,592 [salt.state       ][INFO    ][1522] File /etc/cinder/api-paste.ini is in the correct state
2018-05-09 23:29:53,592 [salt.state       ][INFO    ][1522] Completed state [/etc/cinder/api-paste.ini] at time 23:29:53.592706 duration_in_ms=65.405
2018-05-09 23:29:53,593 [salt.state       ][INFO    ][1522] Running state [/etc/default/cinder-scheduler] at time 23:29:53.593188
2018-05-09 23:29:53,593 [salt.state       ][INFO    ][1522] Executing state file.managed for /etc/default/cinder-scheduler
2018-05-09 23:29:53,605 [salt.state       ][INFO    ][1522] File /etc/default/cinder-scheduler is in the correct state
2018-05-09 23:29:53,605 [salt.state       ][INFO    ][1522] Completed state [/etc/default/cinder-scheduler] at time 23:29:53.605371 duration_in_ms=12.183
2018-05-09 23:29:53,605 [salt.state       ][INFO    ][1522] Running state [cinder-manage db sync; sleep 5;] at time 23:29:53.605853
2018-05-09 23:29:53,606 [salt.state       ][INFO    ][1522] Executing state cmd.run for cinder-manage db sync; sleep 5;
2018-05-09 23:29:53,607 [salt.loaded.int.module.cmdmod][INFO    ][1522] Executing command 'cinder-manage db sync; sleep 5;' in directory '/root'
2018-05-09 23:29:57,058 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509232957050666
2018-05-09 23:29:57,088 [salt.minion      ][INFO    ][1586] Starting a new job with PID 1586
2018-05-09 23:29:57,116 [salt.minion      ][INFO    ][1586] Returning information for job: 20180509232957050666
2018-05-09 23:30:01,621 [salt.state       ][INFO    ][1522] {'pid': 1574, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:30:01,622 [salt.state       ][INFO    ][1522] Completed state [cinder-manage db sync; sleep 5;] at time 23:30:01.621946 duration_in_ms=8016.091
2018-05-09 23:30:01,623 [salt.state       ][INFO    ][1522] Running state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 23:30:01.623477
2018-05-09 23:30:01,624 [salt.state       ][INFO    ][1522] Executing state file.managed for /etc/apache2/conf-available/cinder-wsgi.conf
2018-05-09 23:30:01,721 [salt.state       ][INFO    ][1522] File /etc/apache2/conf-available/cinder-wsgi.conf is in the correct state
2018-05-09 23:30:01,721 [salt.state       ][INFO    ][1522] Completed state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 23:30:01.721837 duration_in_ms=98.36
2018-05-09 23:30:01,723 [salt.state       ][INFO    ][1522] Running state [cinder-wsgi] at time 23:30:01.723604
2018-05-09 23:30:01,723 [salt.state       ][INFO    ][1522] Executing state apache_conf.enabled for cinder-wsgi
2018-05-09 23:30:01,724 [salt.state       ][INFO    ][1522] cinder-wsgi already enabled.
2018-05-09 23:30:01,724 [salt.state       ][INFO    ][1522] Completed state [cinder-wsgi] at time 23:30:01.724699 duration_in_ms=1.095
2018-05-09 23:30:01,725 [salt.state       ][INFO    ][1522] Running state [cinder-api] at time 23:30:01.725168
2018-05-09 23:30:01,725 [salt.state       ][INFO    ][1522] Executing state service.dead for cinder-api
2018-05-09 23:30:01,726 [salt.loaded.int.module.cmdmod][INFO    ][1522] Executing command ['systemctl', 'status', 'cinder-api.service', '-n', '0'] in directory '/root'
2018-05-09 23:30:01,747 [salt.state       ][INFO    ][1522] The named service cinder-api is not available
2018-05-09 23:30:01,748 [salt.state       ][INFO    ][1522] Completed state [cinder-api] at time 23:30:01.748453 duration_in_ms=23.283
2018-05-09 23:30:01,751 [salt.state       ][INFO    ][1522] Running state [apache2] at time 23:30:01.751510
2018-05-09 23:30:01,753 [salt.state       ][INFO    ][1522] Executing state service.running for apache2
2018-05-09 23:30:01,753 [salt.loaded.int.module.cmdmod][INFO    ][1522] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:30:01,771 [salt.loaded.int.module.cmdmod][INFO    ][1522] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:30:01,793 [salt.state       ][INFO    ][1522] The service apache2 is already running
2018-05-09 23:30:01,794 [salt.state       ][INFO    ][1522] Completed state [apache2] at time 23:30:01.794688 duration_in_ms=42.839
2018-05-09 23:30:01,800 [salt.state       ][INFO    ][1522] Running state [cinder-scheduler] at time 23:30:01.800363
2018-05-09 23:30:01,801 [salt.state       ][INFO    ][1522] Executing state service.running for cinder-scheduler
2018-05-09 23:30:01,802 [salt.loaded.int.module.cmdmod][INFO    ][1522] Executing command ['systemctl', 'status', 'cinder-scheduler.service', '-n', '0'] in directory '/root'
2018-05-09 23:30:01,825 [salt.loaded.int.module.cmdmod][INFO    ][1522] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2018-05-09 23:30:01,848 [salt.loaded.int.module.cmdmod][INFO    ][1522] Executing command ['systemctl', 'is-enabled', 'cinder-scheduler.service'] in directory '/root'
2018-05-09 23:30:01,870 [salt.state       ][INFO    ][1522] The service cinder-scheduler is already running
2018-05-09 23:30:01,871 [salt.state       ][INFO    ][1522] Completed state [cinder-scheduler] at time 23:30:01.871207 duration_in_ms=70.843
2018-05-09 23:30:01,876 [salt.state       ][INFO    ][1522] Running state [lvm-driver] at time 23:30:01.876495
2018-05-09 23:30:01,877 [salt.state       ][INFO    ][1522] Executing state cinderng.volume_type_present for lvm-driver
2018-05-09 23:30:07,091 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233007088972
2018-05-09 23:30:07,114 [salt.minion      ][INFO    ][1604] Starting a new job with PID 1604
2018-05-09 23:30:07,143 [salt.minion      ][INFO    ][1604] Returning information for job: 20180509233007088972
2018-05-09 23:30:17,110 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233017104476
2018-05-09 23:30:17,130 [salt.minion      ][INFO    ][1611] Starting a new job with PID 1611
2018-05-09 23:30:17,154 [salt.minion      ][INFO    ][1611] Returning information for job: 20180509233017104476
2018-05-09 23:30:22,161 [salt.state       ][INFO    ][1522] Volume type "lvm-driver" already exists
2018-05-09 23:30:22,162 [salt.state       ][INFO    ][1522] Completed state [lvm-driver] at time 23:30:22.161963 duration_in_ms=20285.468
2018-05-09 23:30:22,163 [salt.state       ][INFO    ][1522] Running state [lvm-driver] at time 23:30:22.163456
2018-05-09 23:30:22,164 [salt.state       ][INFO    ][1522] Executing state cinderng.volume_type_key_present for lvm-driver
2018-05-09 23:30:27,142 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233027137633
2018-05-09 23:30:27,161 [salt.minion      ][INFO    ][1618] Starting a new job with PID 1618
2018-05-09 23:30:27,186 [salt.minion      ][INFO    ][1618] Returning information for job: 20180509233027137633
2018-05-09 23:30:37,175 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233037170589
2018-05-09 23:30:37,201 [salt.minion      ][INFO    ][1628] Starting a new job with PID 1628
2018-05-09 23:30:37,229 [salt.minion      ][INFO    ][1628] Returning information for job: 20180509233037170589
2018-05-09 23:30:47,197 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233047191791
2018-05-09 23:30:47,221 [salt.minion      ][INFO    ][1635] Starting a new job with PID 1635
2018-05-09 23:30:47,246 [salt.minion      ][INFO    ][1635] Returning information for job: 20180509233047191791
2018-05-09 23:30:57,216 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233057214918
2018-05-09 23:30:57,234 [salt.minion      ][INFO    ][1647] Starting a new job with PID 1647
2018-05-09 23:30:57,255 [salt.minion      ][INFO    ][1647] Returning information for job: 20180509233057214918
2018-05-09 23:31:07,433 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233107434482
2018-05-09 23:31:07,454 [salt.minion      ][INFO    ][1657] Starting a new job with PID 1657
2018-05-09 23:31:07,477 [salt.minion      ][INFO    ][1657] Returning information for job: 20180509233107434482
2018-05-09 23:31:17,493 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233117491364
2018-05-09 23:31:17,511 [salt.minion      ][INFO    ][1665] Starting a new job with PID 1665
2018-05-09 23:31:17,533 [salt.minion      ][INFO    ][1665] Returning information for job: 20180509233117491364
2018-05-09 23:31:27,711 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233127710052
2018-05-09 23:31:27,729 [salt.minion      ][INFO    ][1672] Starting a new job with PID 1672
2018-05-09 23:31:27,751 [salt.minion      ][INFO    ][1672] Returning information for job: 20180509233127710052
2018-05-09 23:31:37,818 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233137818233
2018-05-09 23:31:37,835 [salt.minion      ][INFO    ][1697] Starting a new job with PID 1697
2018-05-09 23:31:37,857 [salt.minion      ][INFO    ][1697] Returning information for job: 20180509233137818233
2018-05-09 23:31:40,095 [salt.state       ][INFO    ][1522] Volume type keys "{u'volume_backend_name': u'lvm-driver'}" in volume type "lvm-driver" already exist
2018-05-09 23:31:40,095 [salt.state       ][INFO    ][1522] Completed state [lvm-driver] at time 23:31:40.095744 duration_in_ms=77932.286
2018-05-09 23:31:40,100 [salt.minion      ][INFO    ][1522] Returning information for job: 20180509232946930880
2018-05-09 23:31:40,833 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509233140832661
2018-05-09 23:31:40,852 [salt.minion      ][INFO    ][1704] Starting a new job with PID 1704
2018-05-09 23:31:43,511 [salt.state       ][INFO    ][1704] Loading fresh modules for state activity
2018-05-09 23:31:43,577 [salt.fileclient  ][INFO    ][1704] Fetching file from saltenv 'base', ** done ** 'neutron/init.sls'
2018-05-09 23:31:43,611 [salt.fileclient  ][INFO    ][1704] Fetching file from saltenv 'base', ** done ** 'neutron/server.sls'
2018-05-09 23:31:43,788 [salt.state       ][INFO    ][1704] Running state [/usr/sbin/policy-rc.d] at time 23:31:43.788703
2018-05-09 23:31:43,789 [salt.state       ][INFO    ][1704] Executing state file.managed for /usr/sbin/policy-rc.d
2018-05-09 23:31:43,798 [salt.state       ][INFO    ][1704] File changed:
New file
2018-05-09 23:31:43,798 [salt.state       ][INFO    ][1704] Completed state [/usr/sbin/policy-rc.d] at time 23:31:43.798720 duration_in_ms=10.018
2018-05-09 23:31:45,013 [salt.state       ][INFO    ][1704] Running state [neutron-server] at time 23:31:45.013363
2018-05-09 23:31:45,013 [salt.state       ][INFO    ][1704] Executing state pkg.installed for neutron-server
2018-05-09 23:31:45,014 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:31:45,487 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['apt-cache', '-q', 'policy', 'neutron-server'] in directory '/root'
2018-05-09 23:31:45,584 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:31:47,952 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:31:47,993 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'neutron-server'] in directory '/root'
2018-05-09 23:31:50,953 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233150949602
2018-05-09 23:31:50,977 [salt.minion      ][INFO    ][2085] Starting a new job with PID 2085
2018-05-09 23:31:51,001 [salt.minion      ][INFO    ][2085] Returning information for job: 20180509233150949602
2018-05-09 23:32:00,976 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233200978494
2018-05-09 23:32:00,995 [salt.minion      ][INFO    ][2649] Starting a new job with PID 2649
2018-05-09 23:32:01,020 [salt.minion      ][INFO    ][2649] Returning information for job: 20180509233200978494
2018-05-09 23:32:03,732 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:32:03,816 [salt.state       ][INFO    ][1704] Made the following changes:
'python-waitress' changed from 'absent' to '0.8.10-1'
'ipset' changed from 'absent' to '6.29-1'
'python-ovsdbapp' changed from 'absent' to '0.4.0-0ubuntu2~cloud0'
'neutron-common' changed from 'absent' to '2:11.0.3-0ubuntu2~cloud0'
'python-neutron-fwaas' changed from 'absent' to '1:11.0.1-0ubuntu1~cloud0'
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'neutron-plugin-ml2' changed from 'absent' to '2:11.0.3-0ubuntu2~cloud0'
'libipset3' changed from 'absent' to '6.29-1'
'python-weakrefmethod' changed from 'absent' to '1.0-1'
'python-neutron' changed from 'absent' to '2:11.0.3-0ubuntu2~cloud0'
'python-ryu' changed from 'absent' to '4.15-0ubuntu1~cloud0'
'python-pyroute2' changed from 'absent' to '0.4.18-0ubuntu1~cloud0'
'python-pecan' changed from 'absent' to '1.1.2-3fakesync2~cloud0'
'python-logutils' changed from 'absent' to '0.3.3-5'
'ipset-6.29' changed from 'absent' to '1'
'python-openvswitch' changed from 'absent' to '2.8.1-0ubuntu0.17.10.2~cloud0'
'python-tinyrpc' changed from 'absent' to '0.5-0ubuntu1~cloud0'
'python-webtest' changed from 'absent' to '2.0.18-1ubuntu1'
'neutron-plugin' changed from 'absent' to '1'
'python2.7-neutron' changed from 'absent' to '1'
'neutron-server' changed from 'absent' to '2:11.0.3-0ubuntu2~cloud0'
'python2.7-waitress' changed from 'absent' to '1'
'python2.7-ryu' changed from 'absent' to '1'
'python-neutron-lib' changed from 'absent' to '1.9.1-0ubuntu1~cloud0'

2018-05-09 23:32:03,846 [salt.state       ][INFO    ][1704] Loading fresh modules for state activity
2018-05-09 23:32:03,914 [salt.state       ][INFO    ][1704] Completed state [neutron-server] at time 23:32:03.914761 duration_in_ms=18901.398
2018-05-09 23:32:03,929 [salt.state       ][INFO    ][1704] Running state [python-neutron-lbaas] at time 23:32:03.928994
2018-05-09 23:32:03,929 [salt.state       ][INFO    ][1704] Executing state pkg.installed for python-neutron-lbaas
2018-05-09 23:32:04,472 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:32:04,511 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-neutron-lbaas'] in directory '/root'
2018-05-09 23:32:07,338 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:32:07,418 [salt.state       ][INFO    ][1704] Made the following changes:
'python-neutron-lbaas' changed from 'absent' to '2:11.0.3-0ubuntu1~cloud0'

2018-05-09 23:32:07,453 [salt.state       ][INFO    ][1704] Loading fresh modules for state activity
2018-05-09 23:32:07,492 [salt.state       ][INFO    ][1704] Completed state [python-neutron-lbaas] at time 23:32:07.492695 duration_in_ms=3563.699
2018-05-09 23:32:07,509 [salt.state       ][INFO    ][1704] Running state [gettext-base] at time 23:32:07.509261
2018-05-09 23:32:07,509 [salt.state       ][INFO    ][1704] Executing state pkg.installed for gettext-base
2018-05-09 23:32:07,968 [salt.state       ][INFO    ][1704] All specified packages are already installed
2018-05-09 23:32:07,969 [salt.state       ][INFO    ][1704] Completed state [gettext-base] at time 23:32:07.968963 duration_in_ms=459.703
2018-05-09 23:32:07,969 [salt.state       ][INFO    ][1704] Running state [python-pycadf] at time 23:32:07.969610
2018-05-09 23:32:07,970 [salt.state       ][INFO    ][1704] Executing state pkg.installed for python-pycadf
2018-05-09 23:32:07,978 [salt.state       ][INFO    ][1704] All specified packages are already installed
2018-05-09 23:32:07,978 [salt.state       ][INFO    ][1704] Completed state [python-pycadf] at time 23:32:07.978489 duration_in_ms=8.878
2018-05-09 23:32:07,980 [salt.state       ][INFO    ][1704] Running state [/usr/sbin/policy-rc.d] at time 23:32:07.980325
2018-05-09 23:32:07,980 [salt.state       ][INFO    ][1704] Executing state file.absent for /usr/sbin/policy-rc.d
2018-05-09 23:32:07,981 [salt.state       ][INFO    ][1704] {'removed': '/usr/sbin/policy-rc.d'}
2018-05-09 23:32:07,981 [salt.state       ][INFO    ][1704] Completed state [/usr/sbin/policy-rc.d] at time 23:32:07.981764 duration_in_ms=1.439
2018-05-09 23:32:07,982 [salt.state       ][INFO    ][1704] Running state [neutron-plugin-ml2] at time 23:32:07.982438
2018-05-09 23:32:07,982 [salt.state       ][INFO    ][1704] Executing state pkg.installed for neutron-plugin-ml2
2018-05-09 23:32:07,990 [salt.state       ][INFO    ][1704] All specified packages are already installed
2018-05-09 23:32:07,990 [salt.state       ][INFO    ][1704] Completed state [neutron-plugin-ml2] at time 23:32:07.990945 duration_in_ms=8.507
2018-05-09 23:32:07,992 [salt.state       ][INFO    ][1704] Running state [/etc/neutron/plugins/ml2/ml2_conf.ini] at time 23:32:07.992172
2018-05-09 23:32:07,992 [salt.state       ][INFO    ][1704] Executing state file.managed for /etc/neutron/plugins/ml2/ml2_conf.ini
2018-05-09 23:32:08,022 [salt.fileclient  ][INFO    ][1704] Fetching file from saltenv 'base', ** done ** 'neutron/files/pike/ml2_conf.ini'
2018-05-09 23:32:08,137 [salt.state       ][INFO    ][1704] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -8,6 +9,12 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -47,12 +54,6 @@
 # is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
@@ -81,7 +82,7 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -108,17 +109,6 @@
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-
-[l2pop]
-
-#
-# From neutron.ml2
-#
-
-# Delay within which agent is expected to update existing ports when it
-# restarts (integer value)
-#agent_boot_time = 180
 
 
 [ml2]
@@ -135,27 +125,34 @@
 # value 'local' is useful for single-box testing but provides no connectivity
 # between hosts. (list value)
 #tenant_network_types = local
+tenant_network_types = geneve,flat
 
 # An ordered list of networking mechanism driver entrypoints to be loaded from
 # the neutron.ml2.mechanism_drivers namespace. (list value)
 #mechanism_drivers =
+mechanism_drivers = ovn
 
 # An ordered list of extension driver entrypoints to be loaded from the
 # neutron.ml2.extension_drivers namespace. For example: extension_drivers =
 # port_security,qos (list value)
 #extension_drivers =
+
+
+extension_drivers=port_security
 
 # Maximum size of an IP packet (MTU) that can traverse the underlying physical
 # network infrastructure without fragmentation when using an overlay/tunnel
 # protocol. This option allows specifying a physical network MTU value that
 # differs from the default global_physnet_mtu value. (integer value)
 #path_mtu = 0
+path_mtu = 1500
 
 # A list of mappings of physical networks to MTU values. The format of the
 # mapping is <physnet>:<mtu val>. This mapping allows specifying a physical
 # network MTU value that differs from the default global_physnet_mtu value.
 # (list value)
 #physical_network_mtus =
+physical_network_mtus = physnet1:1500
 
 # Default network type for external networks when no provider attributes are
 # specified. By default it is None, which means that if provider attributes are
@@ -180,6 +177,7 @@
 # default '*' to allow flat networks with arbitrary physical_network names. Use
 # an empty list to disable flat networks. (list value)
 #flat_networks = *
+flat_networks = *
 
 
 [ml2_type_geneve]
@@ -191,6 +189,7 @@
 # Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
 # Geneve VNI IDs that are available for tenant network allocation (list value)
 #vni_ranges =
+vni_ranges = 1:65536
 
 # Geneve encapsulation header size is dynamic, this value is used to calculate
 # the maximum MTU for the driver. This is the sum of the sizes of the outer ETH
@@ -198,6 +197,7 @@
 # which is the size of the Geneve header without any additional option headers.
 # (integer value)
 #max_header_size = 30
+max_header_size = 38
 
 
 [ml2_type_gre]
@@ -209,6 +209,7 @@
 # Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE
 # tunnel IDs that are available for tenant network allocation (list value)
 #tunnel_id_ranges =
+tunnel_id_ranges =2:65535
 
 
 [ml2_type_vlan]
@@ -222,7 +223,7 @@
 # networks, as well as ranges of VLAN tags on each available for allocation to
 # tenant networks. (list value)
 #network_vlan_ranges =
-
+network_vlan_ranges = 
 
 [ml2_type_vxlan]
 
@@ -233,11 +234,13 @@
 # Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
 # VXLAN VNI IDs that are available for tenant network allocation (list value)
 #vni_ranges =
+vni_ranges = 2:65535
 
 # Multicast group for VXLAN. When configured, will enable sending all broadcast
 # traffic to this multicast group. When left unconfigured, will disable
 # multicast VXLAN mode. (string value)
 #vxlan_group = <None>
+vxlan_group = 224.0.0.1
 
 
 [securitygroup]
@@ -253,7 +256,13 @@
 # should be false when using no security groups or using the nova security
 # group API. (boolean value)
 #enable_security_group = true
+firewall_driver = openvswitch
+enable_security_group = True
 
 # Use ipset to speed-up the iptables based security groups. Enabling ipset
 # support requires that ipset is installed on L2 agent node. (boolean value)
 #enable_ipset = true
+[ovn]
+ovn_nb_connection = tcp:172.16.10.36:6641
+ovn_sb_connection = tcp:172.16.10.36:6642
+ovn_l3_scheduler = leastloaded

2018-05-09 23:32:08,142 [salt.state       ][INFO    ][1704] Completed state [/etc/neutron/plugins/ml2/ml2_conf.ini] at time 23:32:08.142856 duration_in_ms=150.683
2018-05-09 23:32:08,144 [salt.state       ][INFO    ][1704] Running state [ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini] at time 23:32:08.144495
2018-05-09 23:32:08,144 [salt.state       ][INFO    ][1704] Executing state cmd.run for ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini
2018-05-09 23:32:08,145 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command 'test -e /etc/neutron/plugin.ini' in directory '/root'
2018-05-09 23:32:08,157 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command 'ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini' in directory '/root'
2018-05-09 23:32:08,168 [salt.state       ][INFO    ][1704] {'pid': 2979, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:32:08,169 [salt.state       ][INFO    ][1704] Completed state [ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini] at time 23:32:08.169265 duration_in_ms=24.77
2018-05-09 23:32:08,171 [salt.state       ][INFO    ][1704] Running state [/etc/neutron/neutron.conf] at time 23:32:08.170652
2018-05-09 23:32:08,171 [salt.state       ][INFO    ][1704] Executing state file.managed for /etc/neutron/neutron.conf
2018-05-09 23:32:08,195 [salt.fileclient  ][INFO    ][1704] Fetching file from saltenv 'base', ** done ** 'neutron/files/pike/neutron-server.conf.Debian'
2018-05-09 23:32:08,419 [salt.state       ][INFO    ][1704] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-core_plugin = ml2
 
 #
 # From neutron
@@ -8,14 +8,17 @@
 # Where to store Neutron state files. This directory must be writable by the
 # agent. (string value)
 #state_path = /var/lib/neutron
-
-# The host IP to bind to. (unknown value)
+state_path = /var/lib/neutron
+
+# The host IP to bind to (string value)
 #bind_host = 0.0.0.0
+bind_host = 172.16.10.36
 
 # The port to bind to (port value)
 # Minimum value: 0
 # Maximum value: 65535
 #bind_port = 9696
+bind_port = 9696
 
 # The path for API extensions. Note that this can be a colon-separated list of
 # paths. For example: api_extensions_path =
@@ -23,15 +26,27 @@
 # neutron.extensions is appended to this, so if your extensions are in there
 # you don't need to specify them here. (string value)
 #api_extensions_path =
+agent_down_time = 30
 
 # The type of authentication to use (string value)
 #auth_strategy = keystone
-
-# The core plugin Neutron will use (string value)
-#core_plugin = <None>
+auth_strategy = keystone
+
+
+
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+
+
+
+
+
+service_plugins = networking_ovn.l3.l3_ovn.OVNL3RouterPlugin,metering,trunk
 
 # The service plugins Neutron will use (list value)
 #service_plugins =
+
+allow_pagination = False
+
 
 # The base MAC address Neutron will use for VIFs. The first 3 octets will
 # remain unchanged. If the 4th octet is not 00, it will also be used. The
@@ -44,6 +59,7 @@
 # The maximum number of items returned in a single response, value was
 # 'infinite' or negative integer means no limit (string value)
 #pagination_max_limit = -1
+pagination_max_limit = -1
 
 # Default value of availability zone hints. The availability zone aware
 # schedulers use this when the resources availability_zone_hints is empty.
@@ -59,6 +75,12 @@
 # Maximum number of host routes per subnet (integer value)
 #max_subnet_host_routes = 20
 
+# DEPRECATED: Maximum number of fixed ips per port. This option is deprecated
+# and will be removed in the Ocata release. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#max_fixed_ips_per_port = 5
+
 # Enables IPv6 Prefix Delegation for automatic subnet CIDR allocation. Set to
 # True to enable IPv6 Prefix Delegation for subnet allocation in a PD-capable
 # environment. Users making subnet creation requests for IPv6 subnets without
@@ -70,9 +92,11 @@
 # DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
 # lease times. (integer value)
 #dhcp_lease_duration = 86400
+dhcp_lease_duration = 600
 
 # Domain to use for building the hostnames (string value)
 #dns_domain = openstacklocal
+dns_domain = novalocal
 
 # Driver for external DNS integration. (string value)
 #external_dns_driver = <None>
@@ -84,23 +108,21 @@
 # MUST be set to False if Neutron is being used in conjunction with Nova
 # security groups. (boolean value)
 #allow_overlapping_ips = false
+allow_overlapping_ips = True
 
 # Hostname to be used by the Neutron server, agents and services running on
 # this machine. All the agents and services running on this machine must use
-# the same host value. (unknown value)
+# the same host value. (string value)
 #host = example.domain
-
-# This string is prepended to the normal URL that is returned in links to the
-# OpenStack Network API. If it is empty (the default), the URLs are returned
-# unchanged. (string value)
-#network_link_prefix = <None>
 
 # Send notification to nova when port status changes (boolean value)
 #notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = true
 
 # Send notification to nova when port data (fixed_ips/floatingip) changes so
 # nova can update its cache. (boolean value)
 #notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = true
 
 # Number of seconds between sending events to nova if there are any events to
 # send. (integer value)
@@ -114,13 +136,10 @@
 # networks. (boolean value)
 #vlan_transparent = false
 
-# DEPRECATED: This will choose the web framework in which to run the Neutron
-# API server. 'pecan' is a new rewrite of the API routing components. (string
-# value)
+# This will choose the web framework in which to run the Neutron API server.
+# 'pecan' is a new experimental rewrite of the API server. (string value)
 # Allowed values: legacy, pecan
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#web_framework = pecan
+#web_framework = legacy
 
 # MTU of the underlying physical network. Neutron uses this value to calculate
 # MTU for all virtual network components. For flat and VLAN networks, neutron
@@ -129,6 +148,7 @@
 # value. Defaults to 1500, the standard value for Ethernet. (integer value)
 # Deprecated group/name - [ml2]/segment_mtu
 #global_physnet_mtu = 1500
+global_physnet_mtu = 1500
 
 # Number of backlog requests to configure the socket with (integer value)
 #backlog = 4096
@@ -149,10 +169,13 @@
 
 # Number of RPC worker processes for service. (integer value)
 #rpc_workers = 1
+rpc_workers = 4
+
 
 # Number of RPC worker processes dedicated to state reports queue. (integer
 # value)
 #rpc_state_report_workers = 1
+rpc_state_report_workers = 4
 
 # Range of seconds to randomly delay when starting the periodic task scheduler
 # to reduce stampeding. (Disable by setting to 0) (integer value)
@@ -175,6 +198,14 @@
 # Group (gid or name) running metadata proxy after its initialization (if
 # empty: agent effective group). (string value)
 #metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy. It should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# copytruncate logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name. (boolean value)
+#metadata_proxy_watch_log = <None>
 
 #
 # From neutron.db
@@ -219,6 +250,7 @@
 # a given tenant network, providing high availability for DHCP service.
 # (integer value)
 #dhcp_agents_per_network = 1
+dhcp_agents_per_network = 2
 
 # Enable services on an agent with admin_state_up False. If this option is
 # False, when admin_state_up of an agent is turned False, services on it will
@@ -238,13 +270,11 @@
 # System-wide flag to determine the type of router that tenants can create.
 # Only admin can override. (boolean value)
 #router_distributed = false
-
-# Determine if setup is configured for DVR. If False, DVR API extension will be
-# disabled. (boolean value)
-#enable_dvr = true
+router_distributed = False
 
 # Driver to use for scheduling router to a default L3 agent (string value)
 #router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
 
 # Allow auto scheduling of routers to L3 agent. (boolean value)
 #router_auto_schedule = true
@@ -252,13 +282,16 @@
 # Automatically reschedule routers from offline L3 agents to online L3 agents.
 # (boolean value)
 #allow_automatic_l3agent_failover = false
+allow_automatic_l3agent_failover = true
 
 # Enable HA mode for virtual routers. (boolean value)
 #l3_ha = false
+l3_ha = False
 
 # Maximum number of L3 agents which a HA router will be scheduled on. If it is
 # set to 0 then the router will be scheduled on every agent. (integer value)
 #max_l3_agents_per_router = 3
+max_l3_agents_per_router = 0
 
 # Subnet used for the l3 HA admin network. (string value)
 #l3_ha_net_cidr = 169.254.192.0/18
@@ -288,6 +321,13 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -327,12 +367,6 @@
 # is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
@@ -361,7 +395,7 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -394,6 +428,7 @@
 #
 
 # Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
 #rpc_conn_pool_size = 30
 
 # The pool size limit for connections expiration policy (integer value)
@@ -404,24 +439,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -431,24 +472,30 @@
 # upper bound for the linger period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
+zmq_linger = 30
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -463,20 +510,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -541,17 +592,19 @@
 # value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
+executor_thread_pool_size = 70
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
+rpc_response_timeout=120
 
 # A URL representing the messaging driver to use and its full configuration.
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -596,10 +649,10 @@
 # is idle for this number of seconds it will be closed. A value of '0' means
 # wait forever. (integer value)
 #client_socket_timeout = 900
+nova_url = http://172.16.10.36:8774/v2
 
 
 [agent]
-root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
 
 #
 # From neutron.agent
@@ -609,7 +662,7 @@
 # /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
 # 'sudo' to skip the filtering and just run the command directly. (string
 # value)
-#root_helper = sudo
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
 
 # Use the root helper when listing the namespaces on a system. This may not be
 # required depending on the security configuration. If the root helper is not
@@ -626,6 +679,7 @@
 # agent_down_time, best if it is half or less than agent_down_time. (floating
 # point value)
 #report_interval = 30
+report_interval = 10
 
 # Log agent heartbeats (boolean value)
 #log_agent_heartbeats = false
@@ -682,9 +736,36 @@
 # (list value)
 #allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
 
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
 
 [database]
-connection = sqlite:////var/lib/neutron/neutron.sqlite
 
 #
 # From neutron.db
@@ -698,7 +779,16 @@
 # From oslo.db
 #
 
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect
+# the database.
+#sqlite_db = oslo.sqlite
+
 # If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
 #sqlite_synchronous = true
 
 # The back end to use for the database. (string value)
@@ -710,7 +800,9 @@
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-#connection = <None>
+
+
+connection = mysql+pymysql://neutron:opnfv_secret@172.16.10.36/neutron?charset=utf8
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
@@ -722,15 +814,12 @@
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
 # Timeout before idle SQL connections are reaped. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #idle_timeout = 3600
+idle_timeout = 3600
 
 # Minimum number of SQL connections to keep open in a pool. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
@@ -742,22 +831,26 @@
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 20
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
+retry_interval = 2
 
 # If set, use this value for max_overflow with SQLAlchemy. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 20
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -796,6 +889,19 @@
 
 [keystone_authtoken]
 
+auth_region=RegionOne
+auth_protocol=http
+revocation_cache_time = 10
+auth_type = password
+auth_host = 172.16.10.36
+auth_port = 35357
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = neutron
+password = opnfv_secret
+auth_uri=http://172.16.10.36:5000
+auth_url=http://172.16.10.36:35357
 #
 # From keystonemiddleware.auth_token
 #
@@ -803,10 +909,10 @@
 # Complete "public" Identity API endpoint. This endpoint should not be an
 # "admin" endpoint, as it should be accessible by all end users.
 # Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should ideally be unversioned, client support in the
-# wild varies. If you're using a versioned v2 endpoint here, then this should
-# *not* be the same endpoint the service user utilizes for validating tokens,
-# because normal end users may not be able to reach that endpoint. (string
+# Although this endpoint should  ideally be unversioned, client support in the
+# wild varies.  If you're using a versioned v2 endpoint here, then this  should
+# *not* be the same endpoint the service user utilizes  for validating tokens,
+# because normal end users may not be  able to reach that endpoint. (string
 # value)
 #auth_uri = <None>
 
@@ -1060,12 +1166,14 @@
 # Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # Type of the nova endpoint to use.  This endpoint will be looked up in the
 # keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Allowed values: public, admin, internal
 #endpoint_type = public
+endpoint_type = internal
 
 #
 # From nova.auth
@@ -1073,6 +1181,13 @@
 
 # Authentication URL (string value)
 #auth_url = <None>
+user_domain_id = default
+project_domain_id = default
+project_name = service
+password = opnfv_secret
+username = nova
+auth_type = password
+auth_url = http://172.16.10.36:35357
 
 # Authentication type to load (string value)
 # Deprecated group/name - [nova]/auth_plugin
@@ -1117,11 +1232,11 @@
 #project_domain_name = <None>
 
 # Project ID to scope to (string value)
-# Deprecated group/name - [nova]/tenant_id
+# Deprecated group/name - [nova]/tenant-id
 #project_id = <None>
 
 # Project name to scope to (string value)
-# Deprecated group/name - [nova]/tenant_name
+# Deprecated group/name - [nova]/tenant-name
 #project_name = <None>
 
 # Tenant ID (string value)
@@ -1146,7 +1261,7 @@
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [nova]/user_name
+# Deprecated group/name - [nova]/user-name
 #username = <None>
 
 
@@ -1157,6 +1272,7 @@
 #
 
 # Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
 #disable_process_locking = false
 
 # Directory to use for lock files.  For security, the specified directory
@@ -1165,7 +1281,9 @@
 # in the environment, use the Python tempfile.gettempdir function to find a
 # suitable location. If external locks are used, a lock path must be set.
 # (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
 #lock_path = /tmp
+lock_path = $state_path/lock
 
 
 [oslo_messaging_amqp]
@@ -1176,64 +1294,61 @@
 
 # Name for the AMQP container. must be globally unique. Defaults to a generated
 # UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
 #container_name = <None>
 
 # Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
 #idle_timeout = 0
 
 # Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
 #trace = false
 
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
 # CA certificate PEM file used to verify the server's certificate (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
 #ssl_ca_file =
 
 # Self-identifying certificate PEM file for client authentication (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
 #ssl_cert_file =
 
 # Private key PEM file used to sign ssl_cert_file certificate (optional)
 # (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
 #ssl_key_file =
 
 # Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
 #ssl_key_password = <None>
 
 # DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Not applicable - not a SSL server
 #allow_insecure_clients = false
 
 # Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
 #sasl_mechanisms =
 
 # Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
 #sasl_config_dir =
 
 # Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
 #sasl_config_name =
 
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
 #username =
 
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
 #password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
@@ -1288,12 +1403,15 @@
 #addressing_mode = dynamic
 
 # address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
 #server_request_prefix = exclusive
 
 # address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
 #broadcast_prefix = broadcast
 
 # address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
 #group_request_prefix = unicast
 
 # Address prefix for all generated RPC addresses (string value)
@@ -1381,7 +1499,7 @@
 # Max fetch bytes of Kafka consumer (integer value)
 #kafka_max_fetch_bytes = 1048576
 
-# Default timeout(s) for Kafka consumers (floating point value)
+# Default timeout(s) for Kafka consumers (integer value)
 #kafka_consumer_timeout = 1.0
 
 # Pool Size for Kafka Consumers (integer value)
@@ -1415,6 +1533,7 @@
 # messaging, messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
+driver = messagingv2
 
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
@@ -1426,11 +1545,6 @@
 # Deprecated group/name - [DEFAULT]/notification_topics
 #topics = notifications
 
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
 
 [oslo_messaging_rabbit]
 
@@ -1444,31 +1558,30 @@
 #amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
 #amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
 
 # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
 # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
 # distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
 
 # SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
 
 # SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
 
 # SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
 #kombu_reconnect_delay = 1.0
 
 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
@@ -1488,6 +1601,7 @@
 
 # DEPRECATED: The RabbitMQ broker address where a single node is used. (string
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1497,24 +1611,32 @@
 # value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_port = 5672
 
 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_hosts = $rabbit_host:$rabbit_port
 
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
 # DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_userid = guest
 
 # DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1522,9 +1644,11 @@
 
 # The RabbitMQ login method. (string value)
 # Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
 #rabbit_login_method = AMQPLAIN
 
 # DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1532,10 +1656,13 @@
 
 # How frequently to retry connecting with RabbitMQ. (integer value)
 #rabbit_retry_interval = 1
+rabbit_retry_interval = 1
 
 # How long to backoff for between retries when connecting to RabbitMQ. (integer
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
 #rabbit_retry_backoff = 2
+rabbit_retry_backoff = 2
 
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
 # (integer value)
@@ -1543,6 +1670,7 @@
 
 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
 # (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #rabbit_max_retries = 0
@@ -1553,6 +1681,7 @@
 # If you just want to make sure that all queues (except those with auto-
 # generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
 # HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
 #rabbit_ha_queues = false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
@@ -1569,12 +1698,15 @@
 # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
 # value)
 #heartbeat_timeout_threshold = 60
+heartbeat_timeout_threshold = 0
 
 # How often times during the heartbeat_timeout_threshold we check the
 # heartbeat. (integer value)
 #heartbeat_rate = 2
+heartbeat_rate = 2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
 #fake_rabbit = false
 
 # Maximum number of channels to allow (integer value)
@@ -1585,6 +1717,9 @@
 
 # How often to send heartbeats for consumer's connections (integer value)
 #heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
 
 # Arguments passed to ssl.wrap_socket (dict value)
 #ssl_options = <None>
@@ -1690,24 +1825,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -1720,21 +1861,26 @@
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -1749,20 +1895,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -1846,9 +1996,11 @@
 #
 
 # The file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
 #policy_file = policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
 #policy_default_rule = default
 
 # Directories where policy configuration files are stored. They can be relative
@@ -1856,7 +2008,21 @@
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
 #policy_dirs = policy.d
+
+
+[qos]
+
+#
+# From neutron.qos
+#
+
+# DEPRECATED: Drivers list to use to send the update notification. This option
+# will be unused in Pike. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#notification_drivers = message_queue
 
 
 [quotas]
@@ -1871,15 +2037,15 @@
 
 # Number of networks allowed per tenant. A negative value means unlimited.
 # (integer value)
-#quota_network = 100
+#quota_network = 10
 
 # Number of subnets allowed per tenant, A negative value means unlimited.
 # (integer value)
-#quota_subnet = 100
+#quota_subnet = 10
 
 # Number of ports allowed per tenant. A negative value means unlimited.
 # (integer value)
-#quota_port = 500
+#quota_port = 50
 
 # Default driver to use for quota checks. (string value)
 #quota_driver = neutron.db.quota.driver.DbQuotaDriver
@@ -1936,3 +2102,6 @@
 # Sets the list of available ciphers. value should be a string in the OpenSSL
 # cipher list format. (string value)
 #ciphers = <None>
+[service_providers]
+
+

2018-05-09 23:32:08,420 [salt.state       ][INFO    ][1704] Completed state [/etc/neutron/neutron.conf] at time 23:32:08.420679 duration_in_ms=250.026
2018-05-09 23:32:08,421 [salt.state       ][INFO    ][1704] Running state [neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head] at time 23:32:08.421190
2018-05-09 23:32:08,421 [salt.state       ][INFO    ][1704] Executing state cmd.run for neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head
2018-05-09 23:32:08,422 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command 'neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head' in directory '/root'
2018-05-09 23:32:11,202 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233211200620
2018-05-09 23:32:11,223 [salt.minion      ][INFO    ][2994] Starting a new job with PID 2994
2018-05-09 23:32:11,247 [salt.minion      ][INFO    ][2994] Returning information for job: 20180509233211200620
2018-05-09 23:32:20,334 [salt.state       ][INFO    ][1704] {'pid': 2984, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> kilo, kilo_initial\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 354db87e3225, nsxv_vdr_metadata.py\nINFO  [alembic.runtime.migration] Running upgrade 354db87e3225 -> 599c6a226151, neutrodb_ipam\nINFO  [alembic.runtime.migration] Running upgrade 599c6a226151 -> 52c5312f6baf, Initial operations in support of address scopes\nINFO  [alembic.runtime.migration] Running upgrade 52c5312f6baf -> 313373c0ffee, Flavor framework\nINFO  [alembic.runtime.migration] Running upgrade 313373c0ffee -> 8675309a5c4f, network_rbac\nINFO  [alembic.runtime.migration] Running upgrade 8675309a5c4f -> 45f955889773, quota_usage\nINFO  [alembic.runtime.migration] Running upgrade 45f955889773 -> 26c371498592, subnetpool hash\nINFO  [alembic.runtime.migration] Running upgrade 26c371498592 -> 1c844d1677f7, add order to dnsnameservers\nINFO  [alembic.runtime.migration] Running upgrade 1c844d1677f7 -> 1b4c6e320f79, address scope support in subnetpool\nINFO  [alembic.runtime.migration] Running upgrade 1b4c6e320f79 -> 48153cb5f051, qos db changes\nINFO  [alembic.runtime.migration] Running upgrade 48153cb5f051 -> 9859ac9c136, quota_reservations\nINFO  [alembic.runtime.migration] Running upgrade 9859ac9c136 -> 34af2b5c5a59, Add dns_name to Port\nINFO  [alembic.runtime.migration] Running upgrade 34af2b5c5a59 -> 59cb5b6cf4d, Add availability zone\nINFO  [alembic.runtime.migration] Running upgrade 59cb5b6cf4d -> 13cfb89f881a, add is_default to subnetpool\nINFO  [alembic.runtime.migration] Running upgrade 13cfb89f881a -> 32e5974ada25, Add standard attribute table\nINFO  [alembic.runtime.migration] Running upgrade 32e5974ada25 -> ec7fcfbf72ee, Add network availability zone\nINFO  [alembic.runtime.migration] Running upgrade ec7fcfbf72ee -> dce3ec7a25c9, Add router availability zone\nINFO  [alembic.runtime.migration] Running upgrade dce3ec7a25c9 -> c3a73f615e4, Add ip_version to AddressScope\nINFO  [alembic.runtime.migration] Running upgrade c3a73f615e4 -> 659bf3d90664, Add tables and attributes to support external DNS integration\nINFO  [alembic.runtime.migration] Running upgrade 659bf3d90664 -> 1df244e556f5, add_unique_ha_router_agent_port_bindings\nINFO  [alembic.runtime.migration] Running upgrade 1df244e556f5 -> 19f26505c74f, Auto Allocated Topology - aka Get-Me-A-Network\nINFO  [alembic.runtime.migration] Running upgrade 19f26505c74f -> 15be73214821, add dynamic routing model data\nINFO  [alembic.runtime.migration] Running upgrade 15be73214821 -> b4caf27aae4, add_bgp_dragent_model_data\nINFO  [alembic.runtime.migration] Running upgrade b4caf27aae4 -> 15e43b934f81, rbac_qos_policy\nINFO  [alembic.runtime.migration] Running upgrade 15e43b934f81 -> 31ed664953e6, Add resource_versions row to agent table\nINFO  [alembic.runtime.migration] Running upgrade 31ed664953e6 -> 2f9e956e7532, tag support\nINFO  [alembic.runtime.migration] Running upgrade 2f9e956e7532 -> 3894bccad37f, add_timestamp_to_base_resources\nINFO  [alembic.runtime.migration] Running upgrade 3894bccad37f -> 0e66c5227a8a, Add desc to standard attr table\nINFO  [alembic.runtime.migration] Running upgrade 0e66c5227a8a -> 45f8dd33480b, qos dscp db addition\nINFO  [alembic.runtime.migration] Running upgrade 45f8dd33480b -> 5abc0278ca73, Add support for VLAN trunking\nINFO  [alembic.runtime.migration] Running upgrade 5abc0278ca73 -> d3435b514502, Add device_id index to Port\nINFO  [alembic.runtime.migration] Running upgrade d3435b514502 -> 30107ab6a3ee, provisioning_blocks.py\nINFO  [alembic.runtime.migration] Running upgrade 30107ab6a3ee -> c415aab1c048, add revisions table\nINFO  [alembic.runtime.migration] Running upgrade c415aab1c048 -> a963b38d82f4, add dns name to portdnses\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 30018084ec99, Initial no-op Liberty contract rule.\nINFO  [alembic.runtime.migration] Running upgrade 30018084ec99 -> 4ffceebfada, network_rbac\nINFO  [alembic.runtime.migration] Running upgrade 4ffceebfada -> 5498d17be016, Drop legacy OVS and LB plugin tables\nINFO  [alembic.runtime.migration] Running upgrade 5498d17be016 -> 2a16083502f3, Metaplugin removal\nINFO  [alembic.runtime.migration] Running upgrade 2a16083502f3 -> 2e5352a0ad4d, Add missing foreign keys\nINFO  [alembic.runtime.migration] Running upgrade 2e5352a0ad4d -> 11926bcfe72d, add geneve ml2 type driver\nINFO  [alembic.runtime.migration] Running upgrade 11926bcfe72d -> 4af11ca47297, Drop cisco monolithic tables\nINFO  [alembic.runtime.migration] Running upgrade 4af11ca47297 -> 1b294093239c, Drop embrane plugin table\nINFO  [alembic.runtime.migration] Running upgrade 1b294093239c -> 8a6d8bdae39, standardattributes migration\nINFO  [alembic.runtime.migration] Running upgrade 8a6d8bdae39 -> 2b4c2465d44b, DVR sheduling refactoring\nINFO  [alembic.runtime.migration] Running upgrade 2b4c2465d44b -> e3278ee65050, Drop NEC plugin tables\nINFO  [alembic.runtime.migration] Running upgrade e3278ee65050 -> c6c112992c9, rbac_qos_policy\nINFO  [alembic.runtime.migration] Running upgrade c6c112992c9 -> 5ffceebfada, network_rbac_external\nINFO  [alembic.runtime.migration] Running upgrade 5ffceebfada -> 4ffceebfcdc, standard_desc\nINFO  [alembic.runtime.migration] Running upgrade 4ffceebfcdc -> 7bbb25278f53, device_owner_ha_replicate_int\nINFO  [alembic.runtime.migration] Running upgrade 7bbb25278f53 -> 89ab9a816d70, Rename ml2_network_segments table\nINFO  [alembic.runtime.migration] Running upgrade a963b38d82f4 -> 3d0e74aa7d37, Add flavor_id to Router\nINFO  [alembic.runtime.migration] Running upgrade 3d0e74aa7d37 -> 030a959ceafa, uniq_routerports0port_id\nINFO  [alembic.runtime.migration] Running upgrade 030a959ceafa -> a5648cfeeadf, Add support for Subnet Service Types\nINFO  [alembic.runtime.migration] Running upgrade a5648cfeeadf -> 0f5bef0f87d4, add_qos_minimum_bandwidth_rules\nINFO  [alembic.runtime.migration] Running upgrade 0f5bef0f87d4 -> 67daae611b6e, add standardattr to qos policies\nINFO  [alembic.runtime.migration] Running upgrade 89ab9a816d70 -> c879c5e1ee90, Add segment_id to subnet\nINFO  [alembic.runtime.migration] Running upgrade c879c5e1ee90 -> 8fd3918ef6f4, Add segment_host_mapping table.\nINFO  [alembic.runtime.migration] Running upgrade 8fd3918ef6f4 -> 4bcd4df1f426, Rename ml2_dvr_port_bindings\nINFO  [alembic.runtime.migration] Running upgrade 4bcd4df1f426 -> b67e765a3524, Remove mtu column from networks.\nINFO  [alembic.runtime.migration] Running upgrade 67daae611b6e -> 6b461a21bcfc, uniq_floatingips0floating_network_id0fixed_port_id0fixed_ip_addr\nINFO  [alembic.runtime.migration] Running upgrade 6b461a21bcfc -> 5cd92597d11d, Add ip_allocation to port\nINFO  [alembic.runtime.migration] Running upgrade 5cd92597d11d -> 929c968efe70, add_pk_version_table\nINFO  [alembic.runtime.migration] Running upgrade 929c968efe70 -> a9c43481023c, extend_pk_with_host_and_add_status_to_ml2_port_binding\nINFO  [alembic.runtime.migration] Running upgrade a9c43481023c -> 804a3c76314c, Add data_plane_status to Port\nINFO  [alembic.runtime.migration] Running upgrade 804a3c76314c -> 2b42d90729da, qos add direction to bw_limit_rule table\nINFO  [alembic.runtime.migration] Running upgrade 2b42d90729da -> 62c781cb6192, add is default to qos policies\nINFO  [alembic.runtime.migration] Running upgrade 62c781cb6192 -> c8c222d42aa9, logging api\nINFO  [alembic.runtime.migration] Running upgrade c8c222d42aa9 -> 349b6fd605a6, Add dns_domain to portdnses\nINFO  [alembic.runtime.migration] Running upgrade 349b6fd605a6 -> 7d32f979895f, add mtu for networks\nINFO  [alembic.runtime.migration] Running upgrade b67e765a3524 -> a84ccf28f06a, migrate dns name from port\nINFO  [alembic.runtime.migration] Running upgrade a84ccf28f06a -> 7d9d8eeec6ad, rename tenant to project\nINFO  [alembic.runtime.migration] Running upgrade 7d9d8eeec6ad -> a8b517cff8ab, Add routerport bindings for L3 HA\nINFO  [alembic.runtime.migration] Running upgrade a8b517cff8ab -> 3b935b28e7a0, migrate to pluggable ipam\nINFO  [alembic.runtime.migration] Running upgrade 3b935b28e7a0 -> b12a3ef66e62, add standardattr to qos policies\nINFO  [alembic.runtime.migration] Running upgrade b12a3ef66e62 -> 97c25b0d2353, Add Name and Description to the networksegments table\nINFO  [alembic.runtime.migration] Running upgrade 97c25b0d2353 -> 2e0d7a8a1586, Add binding index to RouterL3AgentBinding\nINFO  [alembic.runtime.migration] Running upgrade 2e0d7a8a1586 -> 5c85685d616d, Remove availability ranges.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> start_neutron_fwaas, start neutron-fwaas chain\nINFO  [alembic.runtime.migration] Running upgrade start_neutron_fwaas -> 4202e3047e47, add_index_tenant_id\nINFO  [alembic.runtime.migration] Running upgrade 4202e3047e47 -> 540142f314f4, FWaaS router insertion\nINFO  [alembic.runtime.migration] Running upgrade 540142f314f4 -> 796c68dffbb, cisco_csr_fwaas\nINFO  [alembic.runtime.migration] Running upgrade 796c68dffbb -> kilo, kilo\nINFO  [alembic.runtime.migration] Running upgrade kilo -> c40fbb377ad, Initial Liberty no-op script.\nINFO  [alembic.runtime.migration] Running upgrade c40fbb377ad -> 4b47ea298795, add reject rule\nINFO  [alembic.runtime.migration] Running upgrade 4b47ea298795 -> d6a12e637e28, neutron-fwaas v2.0\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 67c8e8d61d5, Initial Liberty no-op script.\nINFO  [alembic.runtime.migration] Running upgrade 67c8e8d61d5 -> 458aa42b14b, fw_table_alter script to make <name> column case sensitive\nINFO  [alembic.runtime.migration] Running upgrade 458aa42b14b -> f83a0b2964d0, rename tenant to project\nINFO  [alembic.runtime.migration] Running upgrade f83a0b2964d0 -> fd38cd995cc0, change shared attribute for firewall resource\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> start_neutron_lbaas, start neutron-lbaas chain\nINFO  [alembic.runtime.migration] Running upgrade start_neutron_lbaas -> lbaasv2, lbaas version 2 api\nINFO  [alembic.runtime.migration] Running upgrade lbaasv2 -> 4deef6d81931, add provisioning and operating statuses\nINFO  [alembic.runtime.migration] Running upgrade 4deef6d81931 -> 4b6d8d5310b8, add_index_tenant_id\nINFO  [alembic.runtime.migration] Running upgrade 4b6d8d5310b8 -> 364f9b6064f0, agentv2\nINFO  [alembic.runtime.migration] Running upgrade 364f9b6064f0 -> lbaasv2_tls, lbaasv2 TLS\nINFO  [alembic.runtime.migration] Running upgrade lbaasv2_tls -> 4ba00375f715, edge_driver\nINFO  [alembic.runtime.migration] Running upgrade 4ba00375f715 -> kilo, kilo\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 3345facd0452, Initial Liberty no-op expand script.\nINFO  [alembic.runtime.migration] Running upgrade 3345facd0452 -> 4a408dd491c2, Addition of Name column to lbaas_members and lbaas_healthmonitors table\nINFO  [alembic.runtime.migration] Running upgrade 4a408dd491c2 -> 3426acbc12de, Add flavor id\nINFO  [alembic.runtime.migration] Running upgrade 3426acbc12de -> 6aee0434f911, independent pools\nINFO  [alembic.runtime.migration] Running upgrade 6aee0434f911 -> 3543deab1547, add_l7_tables\nINFO  [alembic.runtime.migration] Running upgrade 3543deab1547 -> 62deca5010cd, Add tenant-id index for L7 tables\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 130ebfdef43, Initial Liberty no-op contract revision.\nINFO  [alembic.runtime.migration] Running upgrade 130ebfdef43 -> 4b4dc6d5d843, rename tenant to project\nINFO  [alembic.runtime.migration] Running upgrade 4b4dc6d5d843 -> e6417a8b114d, Drop v1 tables\nINFO  [alembic.runtime.migration] Running upgrade 62deca5010cd -> 844352f9fe6f, Add healthmonitor max retries down', 'stdout': 'Running upgrade for neutron ...\nOK\nRunning upgrade for neutron-fwaas ...\nOK\nRunning upgrade for neutron-lbaas ...\nOK'}
2018-05-09 23:32:20,335 [salt.state       ][INFO    ][1704] Completed state [neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head] at time 23:32:20.335049 duration_in_ms=11913.858
2018-05-09 23:32:20,335 [salt.state       ][INFO    ][1704] Running state [/etc/neutron/api-paste.ini] at time 23:32:20.335689
2018-05-09 23:32:20,336 [salt.state       ][INFO    ][1704] Executing state file.managed for /etc/neutron/api-paste.ini
2018-05-09 23:32:20,361 [salt.fileclient  ][INFO    ][1704] Fetching file from saltenv 'base', ** done ** 'neutron/files/pike/api-paste.ini.Debian'
2018-05-09 23:32:20,447 [salt.state       ][INFO    ][1704] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [composite:neutron]
 use = egg:Paste#urlmap
 /: neutronversions_composite

2018-05-09 23:32:20,447 [salt.state       ][INFO    ][1704] Completed state [/etc/neutron/api-paste.ini] at time 23:32:20.447630 duration_in_ms=111.941
2018-05-09 23:32:20,448 [salt.state       ][INFO    ][1704] Running state [/etc/default/neutron-server] at time 23:32:20.448028
2018-05-09 23:32:20,448 [salt.state       ][INFO    ][1704] Executing state file.managed for /etc/default/neutron-server
2018-05-09 23:32:20,470 [salt.fileclient  ][INFO    ][1704] Fetching file from saltenv 'base', ** done ** 'neutron/files/pike/neutron-server'
2018-05-09 23:32:20,548 [salt.state       ][INFO    ][1704] File changed:
--- 
+++ 
@@ -1,5 +1,8 @@
+# Generated by Salt.
+
 # defaults for neutron-server
 
 # path to config file corresponding to the core_plugin specified in
 # neutron.conf
+#NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini"
 NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/ml2/ml2_conf.ini"

2018-05-09 23:32:20,549 [salt.state       ][INFO    ][1704] Completed state [/etc/default/neutron-server] at time 23:32:20.549029 duration_in_ms=101.001
2018-05-09 23:32:20,549 [salt.state       ][INFO    ][1704] Running state [python-networking-ovn] at time 23:32:20.549262
2018-05-09 23:32:20,549 [salt.state       ][INFO    ][1704] Executing state pkg.installed for python-networking-ovn
2018-05-09 23:32:20,572 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:32:20,618 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-networking-ovn'] in directory '/root'
2018-05-09 23:32:21,229 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233221227864
2018-05-09 23:32:21,248 [salt.minion      ][INFO    ][3029] Starting a new job with PID 3029
2018-05-09 23:32:21,275 [salt.minion      ][INFO    ][3029] Returning information for job: 20180509233221227864
2018-05-09 23:32:23,141 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:32:23,211 [salt.state       ][INFO    ][1704] Made the following changes:
'python-networking-ovn' changed from 'absent' to '3.0.0-0ubuntu1~cloud0'

2018-05-09 23:32:23,240 [salt.state       ][INFO    ][1704] Loading fresh modules for state activity
2018-05-09 23:32:23,276 [salt.state       ][INFO    ][1704] Completed state [python-networking-ovn] at time 23:32:23.276539 duration_in_ms=2727.276
2018-05-09 23:32:23,290 [salt.state       ][INFO    ][1704] Running state [ovn-common] at time 23:32:23.290201
2018-05-09 23:32:23,290 [salt.state       ][INFO    ][1704] Executing state pkg.installed for ovn-common
2018-05-09 23:32:23,793 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:32:23,829 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ovn-common'] in directory '/root'
2018-05-09 23:32:28,477 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:32:28,542 [salt.state       ][INFO    ][1704] Made the following changes:
'ovn-common' changed from 'absent' to '2.8.1-0ubuntu0.17.10.2~cloud0'
'openvswitch-common' changed from 'absent' to '2.8.1-0ubuntu0.17.10.2~cloud0'

2018-05-09 23:32:28,567 [salt.state       ][INFO    ][1704] Loading fresh modules for state activity
2018-05-09 23:32:28,600 [salt.state       ][INFO    ][1704] Completed state [ovn-common] at time 23:32:28.600429 duration_in_ms=5310.227
2018-05-09 23:32:28,613 [salt.state       ][INFO    ][1704] Running state [ovn-central] at time 23:32:28.613350
2018-05-09 23:32:28,613 [salt.state       ][INFO    ][1704] Executing state pkg.installed for ovn-central
2018-05-09 23:32:29,094 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:32:29,133 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ovn-central'] in directory '/root'
2018-05-09 23:32:31,254 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233231257903
2018-05-09 23:32:31,270 [salt.minion      ][INFO    ][3845] Starting a new job with PID 3845
2018-05-09 23:32:31,292 [salt.minion      ][INFO    ][3845] Returning information for job: 20180509233231257903
2018-05-09 23:32:35,461 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:32:35,533 [salt.state       ][INFO    ][1704] Made the following changes:
'ovn-central' changed from 'absent' to '2.8.1-0ubuntu0.17.10.2~cloud0'
'openvswitch-switch' changed from 'absent' to '2.8.1-0ubuntu0.17.10.2~cloud0'

2018-05-09 23:32:35,560 [salt.state       ][INFO    ][1704] Loading fresh modules for state activity
2018-05-09 23:32:35,596 [salt.state       ][INFO    ][1704] Completed state [ovn-central] at time 23:32:35.596772 duration_in_ms=6983.419
2018-05-09 23:32:35,600 [salt.state       ][INFO    ][1704] Running state [ovs-appctl -t ovsdb-server ovsdb-server/add-remote ptcp:6640:172.16.10.36] at time 23:32:35.600906
2018-05-09 23:32:35,602 [salt.state       ][INFO    ][1704] Executing state cmd.run for ovs-appctl -t ovsdb-server ovsdb-server/add-remote ptcp:6640:172.16.10.36
2018-05-09 23:32:35,606 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command 'ovs-appctl -t ovsdb-server ovsdb-server/add-remote ptcp:6640:172.16.10.36' in directory '/root'
2018-05-09 23:32:35,649 [salt.state       ][INFO    ][1704] {'pid': 4797, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-05-09 23:32:35,650 [salt.state       ][INFO    ][1704] Completed state [ovs-appctl -t ovsdb-server ovsdb-server/add-remote ptcp:6640:172.16.10.36] at time 23:32:35.650131 duration_in_ms=49.226
2018-05-09 23:32:35,657 [salt.state       ][INFO    ][1704] Running state [open_ovs_port] at time 23:32:35.656978
2018-05-09 23:32:35,657 [salt.state       ][INFO    ][1704] Executing state iptables.append for open_ovs_port
2018-05-09 23:32:35,769 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command '/sbin/iptables --wait -t filter -A INPUT -p tcp --dport 6640 --jump ACCEPT' in directory '/root'
2018-05-09 23:32:35,791 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command '/sbin/iptables-save' in directory '/root'
2018-05-09 23:32:35,817 [salt.state       ][INFO    ][1704] {'locale': 'open_ovs_port'}
2018-05-09 23:32:35,818 [salt.state       ][INFO    ][1704] Completed state [open_ovs_port] at time 23:32:35.818328 duration_in_ms=161.351
2018-05-09 23:32:36,352 [salt.state       ][INFO    ][1704] Running state [/etc/default/ovn-central] at time 23:32:36.352129
2018-05-09 23:32:36,352 [salt.state       ][INFO    ][1704] Executing state file.managed for /etc/default/ovn-central
2018-05-09 23:32:36,380 [salt.fileclient  ][INFO    ][1704] Fetching file from saltenv 'base', ** done ** 'neutron/files/pike/ovn_central_options'
2018-05-09 23:32:36,460 [salt.state       ][INFO    ][1704] File changed:
--- 
+++ 
@@ -1,5 +1,6 @@
+
 # This is a POSIX shell fragment                -*- sh -*-
 
-# OVN_CTL_OPTS: Extra options to pass to ovs-ctl.  This is, for example,
+# OVN_CTL_OPTS: Extra options to pass to ovn-ctl.  This is, for example,
 # a suitable place to specify --ovn-northd-wrapper=valgrind.
-# OVN_CTL_OPTS=
+OVN_CTL_OPTS='--db-sb-addr=172.16.10.36 --db-sb-create-insecure-remote=yes --db-nb-create-insecure-remote=yes --db-nb-addr=172.16.10.36'

2018-05-09 23:32:36,463 [salt.state       ][INFO    ][1704] Completed state [/etc/default/ovn-central] at time 23:32:36.463699 duration_in_ms=111.57
2018-05-09 23:32:36,465 [salt.state       ][INFO    ][1704] Running state [ovn-central] at time 23:32:36.465362
2018-05-09 23:32:36,466 [salt.state       ][INFO    ][1704] Executing state service.running for ovn-central
2018-05-09 23:32:36,467 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'status', 'ovn-central.service', '-n', '0'] in directory '/root'
2018-05-09 23:32:36,496 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'is-active', 'ovn-central.service'] in directory '/root'
2018-05-09 23:32:36,520 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'is-enabled', 'ovn-central.service'] in directory '/root'
2018-05-09 23:32:36,551 [salt.state       ][INFO    ][1704] The service ovn-central is already running
2018-05-09 23:32:36,551 [salt.state       ][INFO    ][1704] Completed state [ovn-central] at time 23:32:36.551644 duration_in_ms=86.282
2018-05-09 23:32:36,552 [salt.state       ][INFO    ][1704] Running state [ovn-central] at time 23:32:36.552140
2018-05-09 23:32:36,552 [salt.state       ][INFO    ][1704] Executing state service.mod_watch for ovn-central
2018-05-09 23:32:36,555 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'is-active', 'ovn-central.service'] in directory '/root'
2018-05-09 23:32:36,574 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'is-enabled', 'ovn-central.service'] in directory '/root'
2018-05-09 23:32:36,604 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ovn-central.service'] in directory '/root'
2018-05-09 23:32:36,878 [salt.state       ][INFO    ][1704] {'ovn-central': True}
2018-05-09 23:32:36,879 [salt.state       ][INFO    ][1704] Completed state [ovn-central] at time 23:32:36.879303 duration_in_ms=327.164
2018-05-09 23:32:36,880 [salt.state       ][INFO    ][1704] Running state [neutron-server] at time 23:32:36.880620
2018-05-09 23:32:36,880 [salt.state       ][INFO    ][1704] Executing state service.running for neutron-server
2018-05-09 23:32:36,882 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'status', 'neutron-server.service', '-n', '0'] in directory '/root'
2018-05-09 23:32:36,906 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'is-active', 'neutron-server.service'] in directory '/root'
2018-05-09 23:32:36,932 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2018-05-09 23:32:36,953 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2018-05-09 23:32:36,976 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'neutron-server.service'] in directory '/root'
2018-05-09 23:32:37,025 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'is-active', 'neutron-server.service'] in directory '/root'
2018-05-09 23:32:37,043 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2018-05-09 23:32:37,057 [salt.loaded.int.module.cmdmod][INFO    ][1704] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2018-05-09 23:32:37,074 [salt.state       ][INFO    ][1704] {'neutron-server': True}
2018-05-09 23:32:37,074 [salt.state       ][INFO    ][1704] Completed state [neutron-server] at time 23:32:37.074857 duration_in_ms=194.237
2018-05-09 23:32:37,076 [salt.minion      ][INFO    ][1704] Returning information for job: 20180509233140832661
2018-05-09 23:35:13,811 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509233513820321
2018-05-09 23:35:13,835 [salt.minion      ][INFO    ][5095] Starting a new job with PID 5095
2018-05-09 23:35:16,656 [salt.state       ][INFO    ][5095] Loading fresh modules for state activity
2018-05-09 23:35:16,728 [salt.fileclient  ][INFO    ][5095] Fetching file from saltenv 'base', ** done ** 'mongodb/init.sls'
2018-05-09 23:35:16,757 [salt.fileclient  ][INFO    ][5095] Fetching file from saltenv 'base', ** done ** 'mongodb/server.sls'
2018-05-09 23:35:16,800 [salt.fileclient  ][INFO    ][5095] Fetching file from saltenv 'base', ** done ** 'mongodb/map.jinja'
2018-05-09 23:35:18,293 [salt.state       ][INFO    ][5095] Running state [mongodb-server] at time 23:35:18.293831
2018-05-09 23:35:18,294 [salt.state       ][INFO    ][5095] Executing state pkg.installed for mongodb-server
2018-05-09 23:35:18,295 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:35:18,831 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['apt-cache', '-q', 'policy', 'mongodb-server'] in directory '/root'
2018-05-09 23:35:18,948 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:35:21,526 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:35:21,564 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'mongodb-server'] in directory '/root'
2018-05-09 23:35:23,839 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233523843576
2018-05-09 23:35:23,865 [salt.minion      ][INFO    ][5471] Starting a new job with PID 5471
2018-05-09 23:35:23,895 [salt.minion      ][INFO    ][5471] Returning information for job: 20180509233523843576
2018-05-09 23:35:33,867 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233533875116
2018-05-09 23:35:33,896 [salt.minion      ][INFO    ][6052] Starting a new job with PID 6052
2018-05-09 23:35:33,929 [salt.minion      ][INFO    ][6052] Returning information for job: 20180509233533875116
2018-05-09 23:35:34,837 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:35:34,905 [salt.state       ][INFO    ][5095] Made the following changes:
'mongodb-clients' changed from 'absent' to '1:2.6.10-0ubuntu1'
'mongodb-server' changed from 'absent' to '1:2.6.10-0ubuntu1'
'libgoogle-perftools4' changed from 'absent' to '2.4-0ubuntu5.16.04.1'
'libsnappy1v5' changed from 'absent' to '1.1.3-2'
'libboost-thread1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libyaml-cpp0.5v5' changed from 'absent' to '0.5.2-3'
'libpcrecpp0v5' changed from 'absent' to '2:8.38-3.1'
'libv8-3.14.5' changed from 'absent' to '3.14.5.8-5ubuntu2'
'libtcmalloc-minimal4' changed from 'absent' to '2.4-0ubuntu5.16.04.1'
'libboost-filesystem1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libunwind8' changed from 'absent' to '1.1-4.1'
'libboost-program-options1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libboost-system1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'

2018-05-09 23:35:34,941 [salt.state       ][INFO    ][5095] Loading fresh modules for state activity
2018-05-09 23:35:35,010 [salt.state       ][INFO    ][5095] Completed state [mongodb-server] at time 23:35:35.010229 duration_in_ms=16716.397
2018-05-09 23:35:35,034 [salt.state       ][INFO    ][5095] Running state [mongodb] at time 23:35:35.034102
2018-05-09 23:35:35,035 [salt.state       ][INFO    ][5095] Executing state pkg.installed for mongodb
2018-05-09 23:35:35,590 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:35:35,630 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'mongodb'] in directory '/root'
2018-05-09 23:35:37,687 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:35:37,759 [salt.state       ][INFO    ][5095] Made the following changes:
'mongodb' changed from 'absent' to '1:2.6.10-0ubuntu1'

2018-05-09 23:35:37,785 [salt.state       ][INFO    ][5095] Loading fresh modules for state activity
2018-05-09 23:35:37,820 [salt.state       ][INFO    ][5095] Completed state [mongodb] at time 23:35:37.820071 duration_in_ms=2785.968
2018-05-09 23:35:37,832 [salt.state       ][INFO    ][5095] Running state [python-pymongo] at time 23:35:37.832125
2018-05-09 23:35:37,832 [salt.state       ][INFO    ][5095] Executing state pkg.installed for python-pymongo
2018-05-09 23:35:38,274 [salt.state       ][INFO    ][5095] All specified packages are already installed
2018-05-09 23:35:38,275 [salt.state       ][INFO    ][5095] Completed state [python-pymongo] at time 23:35:38.275558 duration_in_ms=443.432
2018-05-09 23:35:38,276 [salt.state       ][INFO    ][5095] Running state [mongodb-clients] at time 23:35:38.276085
2018-05-09 23:35:38,276 [salt.state       ][INFO    ][5095] Executing state pkg.installed for mongodb-clients
2018-05-09 23:35:38,283 [salt.state       ][INFO    ][5095] All specified packages are already installed
2018-05-09 23:35:38,283 [salt.state       ][INFO    ][5095] Completed state [mongodb-clients] at time 23:35:38.283774 duration_in_ms=7.689
2018-05-09 23:35:38,286 [salt.state       ][INFO    ][5095] Running state [/etc/mongodb.conf] at time 23:35:38.286942
2018-05-09 23:35:38,287 [salt.state       ][INFO    ][5095] Executing state file.managed for /etc/mongodb.conf
2018-05-09 23:35:38,317 [salt.fileclient  ][INFO    ][5095] Fetching file from saltenv 'base', ** done ** 'mongodb/files/mongodb.conf'
2018-05-09 23:35:38,352 [salt.state       ][INFO    ][5095] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 # mongodb.conf
 
 # Where to store the data.
@@ -8,7 +10,7 @@
 
 logappend=true
 
-bind_ip = 127.0.0.1
+bind_ip = 172.16.10.36,127.0.0.1
 #port = 27017
 
 # Enable journaling, http://www.mongodb.org/display/DOCS/Journaling
@@ -17,12 +19,11 @@
 # Enables periodic logging of CPU utilization and I/O wait
 #cpu = true
 
+keyFile = /etc/mongodb.key
+
 # Turn on/off security.  Off is currently the default
 #noauth = true
-#auth = true
-
-# Verbose logging output.
-#verbose = true
+auth = true
 
 # Inspect all client data for validity on receipt (useful for
 # developing drivers)
@@ -31,13 +32,21 @@
 # Enable db quota management
 #quota = true
 
+#OpenStack guide for Juno
+smallfiles = true
+
+# Verbose logging output.
+verbose = v
+
+# logLevel
+setParameter = logLevel=1
+
 # Set oplogging level where n is
 #   0=off (default)
 #   1=W
 #   2=R
 #   3=both
 #   7=W+some reads
-#oplog = 0
 
 # Diagnostic/debugging option
 #nocursors = true

2018-05-09 23:35:38,352 [salt.state       ][INFO    ][5095] Completed state [/etc/mongodb.conf] at time 23:35:38.352634 duration_in_ms=65.692
2018-05-09 23:35:38,352 [salt.state       ][INFO    ][5095] Running state [/etc/mongodb.key] at time 23:35:38.352964
2018-05-09 23:35:38,353 [salt.state       ][INFO    ][5095] Executing state file.managed for /etc/mongodb.key
2018-05-09 23:35:38,354 [salt.state       ][INFO    ][5095] File changed:
New file
2018-05-09 23:35:38,355 [salt.state       ][INFO    ][5095] Completed state [/etc/mongodb.key] at time 23:35:38.354970 duration_in_ms=2.006
2018-05-09 23:35:38,355 [salt.state       ][INFO    ][5095] Running state [/var/lock/mongodb] at time 23:35:38.355190
2018-05-09 23:35:38,355 [salt.state       ][INFO    ][5095] Executing state file.directory for /var/lock/mongodb
2018-05-09 23:35:38,356 [salt.state       ][INFO    ][5095] {'/var/lock/mongodb': 'New Dir'}
2018-05-09 23:35:38,356 [salt.state       ][INFO    ][5095] Completed state [/var/lock/mongodb] at time 23:35:38.356195 duration_in_ms=1.005
2018-05-09 23:35:38,357 [salt.state       ][INFO    ][5095] Running state [mongodb] at time 23:35:38.357478
2018-05-09 23:35:38,357 [salt.state       ][INFO    ][5095] Executing state service.running for mongodb
2018-05-09 23:35:38,358 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['systemctl', 'status', 'mongodb.service', '-n', '0'] in directory '/root'
2018-05-09 23:35:38,376 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['systemctl', 'is-active', 'mongodb.service'] in directory '/root'
2018-05-09 23:35:38,393 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['systemctl', 'is-enabled', 'mongodb.service'] in directory '/root'
2018-05-09 23:35:38,411 [salt.state       ][INFO    ][5095] The service mongodb is already running
2018-05-09 23:35:38,411 [salt.state       ][INFO    ][5095] Completed state [mongodb] at time 23:35:38.411477 duration_in_ms=53.998
2018-05-09 23:35:38,411 [salt.state       ][INFO    ][5095] Running state [mongodb] at time 23:35:38.411782
2018-05-09 23:35:38,412 [salt.state       ][INFO    ][5095] Executing state service.mod_watch for mongodb
2018-05-09 23:35:38,412 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['systemctl', 'is-active', 'mongodb.service'] in directory '/root'
2018-05-09 23:35:38,430 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['systemctl', 'is-enabled', 'mongodb.service'] in directory '/root'
2018-05-09 23:35:38,449 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'mongodb.service'] in directory '/root'
2018-05-09 23:35:38,495 [salt.state       ][INFO    ][5095] {'mongodb': True}
2018-05-09 23:35:38,495 [salt.state       ][INFO    ][5095] Completed state [mongodb] at time 23:35:38.495667 duration_in_ms=83.885
2018-05-09 23:35:38,496 [salt.state       ][INFO    ][5095] Running state [/var/tmp/mongodb_user.js] at time 23:35:38.495999
2018-05-09 23:35:38,496 [salt.state       ][INFO    ][5095] Executing state file.managed for /var/tmp/mongodb_user.js
2018-05-09 23:35:38,522 [salt.fileclient  ][INFO    ][5095] Fetching file from saltenv 'base', ** done ** 'mongodb/files/user.js'
2018-05-09 23:35:38,567 [salt.state       ][INFO    ][5095] File changed:
New file
2018-05-09 23:35:38,567 [salt.state       ][INFO    ][5095] Completed state [/var/tmp/mongodb_user.js] at time 23:35:38.567706 duration_in_ms=71.707
2018-05-09 23:35:38,570 [salt.state       ][INFO    ][5095] Running state [mongo localhost:27017/admin /var/tmp/mongodb_user.js && touch /var/lock/mongodb/mongodb_password_changed] at time 23:35:38.569977
2018-05-09 23:35:38,570 [salt.state       ][INFO    ][5095] Executing state cmd.run for mongo localhost:27017/admin /var/tmp/mongodb_user.js && touch /var/lock/mongodb/mongodb_password_changed
2018-05-09 23:35:38,571 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command 'mongo localhost:27017/admin /var/tmp/mongodb_user.js && touch /var/lock/mongodb/mongodb_password_changed' in directory '/root'
2018-05-09 23:35:38,708 [salt.state       ][INFO    ][5095] {'pid': 6269, 'retcode': 0, 'stderr': '', 'stdout': 'MongoDB shell version: 2.6.10\nconnecting to: localhost:27017/admin\nWARNING: The \'addUser\' shell helper is DEPRECATED. Please use \'createUser\' instead\nSuccessfully added user: { "user" : "admin", "roles" : [ "root" ] }'}
2018-05-09 23:35:38,708 [salt.state       ][INFO    ][5095] Completed state [mongo localhost:27017/admin /var/tmp/mongodb_user.js && touch /var/lock/mongodb/mongodb_password_changed] at time 23:35:38.708893 duration_in_ms=138.916
2018-05-09 23:35:38,709 [salt.state       ][INFO    ][5095] Running state [/var/tmp/mongodb_user_ceilometer.js] at time 23:35:38.709359
2018-05-09 23:35:38,710 [salt.state       ][INFO    ][5095] Executing state file.managed for /var/tmp/mongodb_user_ceilometer.js
2018-05-09 23:35:38,735 [salt.fileclient  ][INFO    ][5095] Fetching file from saltenv 'base', ** done ** 'mongodb/files/user_role.js'
2018-05-09 23:35:38,770 [salt.state       ][INFO    ][5095] File changed:
New file
2018-05-09 23:35:38,771 [salt.state       ][INFO    ][5095] Completed state [/var/tmp/mongodb_user_ceilometer.js] at time 23:35:38.770984 duration_in_ms=61.625
2018-05-09 23:35:38,772 [salt.state       ][INFO    ][5095] Running state [mongo localhost:27017/admin -u admin -p opnfv_secret /var/tmp/mongodb_user_ceilometer.js && touch /var/lock/mongodb/mongodb_user_ceilometer_created] at time 23:35:38.772096
2018-05-09 23:35:38,772 [salt.state       ][INFO    ][5095] Executing state cmd.run for mongo localhost:27017/admin -u admin -p opnfv_secret /var/tmp/mongodb_user_ceilometer.js && touch /var/lock/mongodb/mongodb_user_ceilometer_created
2018-05-09 23:35:38,772 [salt.loaded.int.module.cmdmod][INFO    ][5095] Executing command 'mongo localhost:27017/admin -u admin -p opnfv_secret /var/tmp/mongodb_user_ceilometer.js && touch /var/lock/mongodb/mongodb_user_ceilometer_created' in directory '/root'
2018-05-09 23:35:38,852 [salt.state       ][INFO    ][5095] {'pid': 6286, 'retcode': 0, 'stderr': '', 'stdout': 'MongoDB shell version: 2.6.10\nconnecting to: localhost:27017/admin\nWARNING: The \'addUser\' shell helper is DEPRECATED. Please use \'createUser\' instead\nSuccessfully added user: { "user" : "ceilometer", "roles" : [ "readWrite", "dbAdmin" ] }'}
2018-05-09 23:35:38,853 [salt.state       ][INFO    ][5095] Completed state [mongo localhost:27017/admin -u admin -p opnfv_secret /var/tmp/mongodb_user_ceilometer.js && touch /var/lock/mongodb/mongodb_user_ceilometer_created] at time 23:35:38.853287 duration_in_ms=81.191
2018-05-09 23:35:38,855 [salt.minion      ][INFO    ][5095] Returning information for job: 20180509233513820321
2018-05-09 23:35:39,622 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509233539628954
2018-05-09 23:35:39,642 [salt.minion      ][INFO    ][6297] Starting a new job with PID 6297
2018-05-09 23:35:42,390 [salt.state       ][INFO    ][6297] Loading fresh modules for state activity
2018-05-09 23:35:42,456 [salt.fileclient  ][INFO    ][6297] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-05-09 23:35:42,491 [salt.fileclient  ][INFO    ][6297] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-05-09 23:35:43,956 [salt.state       ][INFO    ][6297] Running state [aodh-api] at time 23:35:43.956866
2018-05-09 23:35:43,957 [salt.state       ][INFO    ][6297] Executing state pkg.installed for aodh-api
2018-05-09 23:35:43,957 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:35:44,437 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-05-09 23:35:44,539 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:35:46,913 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:35:46,951 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-05-09 23:35:49,640 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233549646457
2018-05-09 23:35:49,664 [salt.minion      ][INFO    ][6678] Starting a new job with PID 6678
2018-05-09 23:35:49,696 [salt.minion      ][INFO    ][6678] Returning information for job: 20180509233549646457
2018-05-09 23:35:59,668 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233559673268
2018-05-09 23:35:59,689 [salt.minion      ][INFO    ][8603] Starting a new job with PID 8603
2018-05-09 23:35:59,714 [salt.minion      ][INFO    ][8603] Returning information for job: 20180509233559673268
2018-05-09 23:36:05,769 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:36:05,828 [salt.state       ][INFO    ][6297] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'c++-compiler' changed from 'absent' to '1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-124.148'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '5.1.0-0ubuntu1~cloud0'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libc-dev' changed from 'absent' to '1'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-gnocchiclient' changed from 'absent' to '3.3.1-0ubuntu2~cloud0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '5.1.0-0ubuntu1~cloud0'
'python-cotyledon' changed from 'absent' to '1.6.3-0ubuntu1~cloud0'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'python-aodh' changed from 'absent' to '5.1.0-0ubuntu1~cloud0'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.9'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.6'

2018-05-09 23:36:05,857 [salt.state       ][INFO    ][6297] Loading fresh modules for state activity
2018-05-09 23:36:05,919 [salt.state       ][INFO    ][6297] Completed state [aodh-api] at time 23:36:05.919164 duration_in_ms=21962.299
2018-05-09 23:36:05,930 [salt.state       ][INFO    ][6297] Running state [aodh-evaluator] at time 23:36:05.930525
2018-05-09 23:36:05,931 [salt.state       ][INFO    ][6297] Executing state pkg.installed for aodh-evaluator
2018-05-09 23:36:06,371 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:36:06,404 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-05-09 23:36:09,605 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:36:09,664 [salt.state       ][INFO    ][6297] Made the following changes:
'aodh-evaluator' changed from 'absent' to '5.1.0-0ubuntu1~cloud0'

2018-05-09 23:36:09,688 [salt.state       ][INFO    ][6297] Loading fresh modules for state activity
2018-05-09 23:36:09,723 [salt.state       ][INFO    ][6297] Completed state [aodh-evaluator] at time 23:36:09.723478 duration_in_ms=3792.949
2018-05-09 23:36:09,735 [salt.state       ][INFO    ][6297] Running state [aodh-notifier] at time 23:36:09.735819
2018-05-09 23:36:09,736 [salt.state       ][INFO    ][6297] Executing state pkg.installed for aodh-notifier
2018-05-09 23:36:10,191 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:36:10,233 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-05-09 23:36:10,407 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233609898814
2018-05-09 23:36:10,426 [salt.minion      ][INFO    ][12673] Starting a new job with PID 12673
2018-05-09 23:36:10,500 [salt.minion      ][INFO    ][12673] Returning information for job: 20180509233609898814
2018-05-09 23:36:13,773 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:36:13,826 [salt.state       ][INFO    ][6297] Made the following changes:
'aodh-notifier' changed from 'absent' to '5.1.0-0ubuntu1~cloud0'

2018-05-09 23:36:13,849 [salt.state       ][INFO    ][6297] Loading fresh modules for state activity
2018-05-09 23:36:13,882 [salt.state       ][INFO    ][6297] Completed state [aodh-notifier] at time 23:36:13.882178 duration_in_ms=4146.359
2018-05-09 23:36:13,894 [salt.state       ][INFO    ][6297] Running state [aodh-listener] at time 23:36:13.894356
2018-05-09 23:36:13,894 [salt.state       ][INFO    ][6297] Executing state pkg.installed for aodh-listener
2018-05-09 23:36:14,565 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:36:14,605 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-05-09 23:36:18,001 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:36:18,069 [salt.state       ][INFO    ][6297] Made the following changes:
'aodh-listener' changed from 'absent' to '5.1.0-0ubuntu1~cloud0'

2018-05-09 23:36:18,092 [salt.state       ][INFO    ][6297] Loading fresh modules for state activity
2018-05-09 23:36:18,125 [salt.state       ][INFO    ][6297] Completed state [aodh-listener] at time 23:36:18.125552 duration_in_ms=4231.195
2018-05-09 23:36:18,138 [salt.state       ][INFO    ][6297] Running state [python-aodhclient] at time 23:36:18.138138
2018-05-09 23:36:18,138 [salt.state       ][INFO    ][6297] Executing state pkg.installed for python-aodhclient
2018-05-09 23:36:18,732 [salt.state       ][INFO    ][6297] All specified packages are already installed
2018-05-09 23:36:18,732 [salt.state       ][INFO    ][6297] Completed state [python-aodhclient] at time 23:36:18.732855 duration_in_ms=594.715
2018-05-09 23:36:18,737 [salt.state       ][INFO    ][6297] Running state [/etc/aodh/aodh.conf] at time 23:36:18.737564
2018-05-09 23:36:18,738 [salt.state       ][INFO    ][6297] Executing state file.managed for /etc/aodh/aodh.conf
2018-05-09 23:36:18,786 [salt.fileclient  ][INFO    ][6297] Fetching file from saltenv 'base', ** done ** 'aodh/files/pike/aodh.conf.Debian'
2018-05-09 23:36:18,933 [salt.state       ][INFO    ][6297] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -52,6 +51,12 @@
 # INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
 
 # The name of a logging configuration file. This file is appended to any
 # existing logging configuration files. For details about logging configuration
@@ -78,6 +83,7 @@
 # is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
+log_dir = /var/log/aodh
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
@@ -91,12 +97,6 @@
 # is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
@@ -125,8 +125,8 @@
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,iso8601=WARN,keystonemiddleware=WARN,oslo.messaging=INFO,oslo_messaging=INFO,qpid=WARN,requests.packages.urllib3.connectionpool=WARN,requests.packages.urllib3.util.retry=WARN,routes.middleware=WARN,sqlalchemy=WARN,stevedore=WARN,suds=INFO,taskflow=WARN,urllib3.connectionpool=WARN,urllib3.util.retry=WARN,websocket=WARN
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
@@ -158,6 +158,7 @@
 #
 
 # Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
 #rpc_conn_pool_size = 30
 
 # The pool size limit for connections expiration policy (integer value)
@@ -168,24 +169,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -198,21 +205,26 @@
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -227,20 +239,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -305,8 +321,7 @@
 # value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
@@ -316,6 +331,7 @@
 # A URL representing the messaging driver to use and its full configuration.
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -335,24 +351,34 @@
 # From aodh
 #
 
+port=8042
+
+host=172.16.10.36
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-RBJg3D/aodh-5.1.0/aodh/api/api-paste.ini
+#paste_config = /build/aodh-t4wvpD/aodh-4.0.0/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
 
-# Project name of resources creator in Gnocchi. (For example the Ceilometer
-# project name (string value)
-#gnocchi_external_project_owner = service
+# DEPRECATED: Enable deprecated combination alarms. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Combination alarms are deprecated. This option and combination alarms
+# will be removed in Aodh 5.0.
+#enable_combination_alarms = false
 
 # Maximum number of alarms defined for a user. (integer value)
+# Deprecated group/name - [DEFAULT]/user_alarm_quota
 #user_alarm_quota = <None>
 
 # Maximum number of alarms defined for a project. (integer value)
+# Deprecated group/name - [DEFAULT]/project_alarm_quota
 #project_alarm_quota = <None>
 
 # Maximum count of actions for each state of an alarm, non-positive number
 # means no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/alarm_max_actions
 #alarm_max_actions = -1
 
 
@@ -414,9 +440,36 @@
 #allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
 
 
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
+
+
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -425,24 +478,34 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
+alarm_history_time_to_live = 86400
 
 #
 # From oslo.db
 #
 
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect
+# the database.
+#sqlite_db = oslo.sqlite
+
 # If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
 #sqlite_synchronous = true
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
+backend = sqlalchemy
 
 # The SQLAlchemy connection string to use to connect to the database. (string
 # value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-#connection = <None>
+connection = mysql+pymysql://aodh:opnfv_secret@172.16.10.36/aodh
 
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
@@ -454,10 +517,6 @@
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
 # Timeout before idle SQL connections are reaped. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
@@ -574,12 +633,27 @@
 # Complete "public" Identity API endpoint. This endpoint should not be an
 # "admin" endpoint, as it should be accessible by all end users.
 # Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should ideally be unversioned, client support in the
-# wild varies. If you're using a versioned v2 endpoint here, then this should
-# *not* be the same endpoint the service user utilizes for validating tokens,
-# because normal end users may not be able to reach that endpoint. (string
+# Although this endpoint should  ideally be unversioned, client support in the
+# wild varies.  If you're using a versioned v2 endpoint here, then this  should
+# *not* be the same endpoint the service user utilizes  for validating tokens,
+# because normal end users may not be  able to reach that endpoint. (string
 # value)
 #auth_uri = <None>
+
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = aodh
+password = opnfv_secret
+auth_uri = http://172.16.10.36:5000
+auth_url = http://172.16.10.36:35357
+interface = internalURL
+token_cache_time = -1
+
+#admin_user=aodh
+#admin_password=opnfv_secret
+#admin_tenant_name=service
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -731,43 +805,6 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Allowed values: http, https
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
@@ -787,6 +824,7 @@
 #workers = 1
 
 # The topic that aodh uses for event alarm evaluation. (string value)
+# Deprecated group/name - [DEFAULT]/event_alarm_topic
 #event_alarm_topic = alarm.all
 
 # Number of notification messages to wait before dispatching them. (integer
@@ -871,64 +909,61 @@
 
 # Name for the AMQP container. must be globally unique. Defaults to a generated
 # UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
 #container_name = <None>
 
 # Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
 #idle_timeout = 0
 
 # Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
 #trace = false
 
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
 # CA certificate PEM file used to verify the server's certificate (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
 #ssl_ca_file =
 
 # Self-identifying certificate PEM file for client authentication (string
 # value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
 #ssl_cert_file =
 
 # Private key PEM file used to sign ssl_cert_file certificate (optional)
 # (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
 #ssl_key_file =
 
 # Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
 #ssl_key_password = <None>
 
 # DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Not applicable - not a SSL server
 #allow_insecure_clients = false
 
 # Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
 #sasl_mechanisms =
 
 # Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
 #sasl_config_dir =
 
 # Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
 #sasl_config_name =
 
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
 #username =
 
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
 #password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
@@ -983,12 +1018,15 @@
 #addressing_mode = dynamic
 
 # address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
 #server_request_prefix = exclusive
 
 # address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
 #broadcast_prefix = broadcast
 
 # address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
 #group_request_prefix = unicast
 
 # Address prefix for all generated RPC addresses (string value)
@@ -1076,7 +1114,7 @@
 # Max fetch bytes of Kafka consumer (integer value)
 #kafka_max_fetch_bytes = 1048576
 
-# Default timeout(s) for Kafka consumers (floating point value)
+# Default timeout(s) for Kafka consumers (integer value)
 #kafka_consumer_timeout = 1.0
 
 # Pool Size for Kafka Consumers (integer value)
@@ -1120,11 +1158,7 @@
 # Deprecated group/name - [rpc_notifier2]/topics
 # Deprecated group/name - [DEFAULT]/notification_topics
 #topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
+topics = notifications
 
 
 [oslo_messaging_rabbit]
@@ -1137,33 +1171,33 @@
 # Deprecated group/name - [DEFAULT]/amqp_durable_queues
 # Deprecated group/name - [DEFAULT]/rabbit_durable_queues
 #amqp_durable_queues = false
+amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
 #amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
 
 # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
 # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
 # distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
 
 # SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
 
 # SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
 
 # SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
 #kombu_reconnect_delay = 1.0
 
 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
@@ -1183,6 +1217,7 @@
 
 # DEPRECATED: The RabbitMQ broker address where a single node is used. (string
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1192,34 +1227,46 @@
 # value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_port = 5672
 
 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_hosts = $rabbit_host:$rabbit_port
 
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
 # DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_userid = guest
+rabbit_userid = openstack
 
 # DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_password = guest
+rabbit_password = opnfv_secret
 
 # The RabbitMQ login method. (string value)
 # Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
 #rabbit_login_method = AMQPLAIN
 
 # DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
@@ -1230,6 +1277,7 @@
 
 # How long to backoff for between retries when connecting to RabbitMQ. (integer
 # value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
 #rabbit_retry_backoff = 2
 
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
@@ -1238,6 +1286,7 @@
 
 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
 # (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #rabbit_max_retries = 0
@@ -1248,6 +1297,7 @@
 # If you just want to make sure that all queues (except those with auto-
 # generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
 # HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
 #rabbit_ha_queues = false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
@@ -1258,7 +1308,7 @@
 
 # Specifies the number of messages to prefetch. Setting to zero allows
 # unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
+#rabbit_qos_prefetch_count = 64
 
 # Number of seconds after which the Rabbit broker is considered down if
 # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
@@ -1270,6 +1320,7 @@
 #heartbeat_rate = 2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
 #fake_rabbit = false
 
 # Maximum number of channels to allow (integer value)
@@ -1280,6 +1331,9 @@
 
 # How often to send heartbeats for consumer's connections (integer value)
 #heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
 
 # Arguments passed to ssl.wrap_socket (dict value)
 #ssl_options = <None>
@@ -1385,24 +1439,30 @@
 
 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
 # The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
 # Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
 #rpc_zmq_matchmaker = redis
 
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
 #rpc_zmq_contexts = 1
 
 # Maximum number of ingress messages to locally buffer per topic. Default is
 # unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
 #rpc_zmq_ipc_dir = /var/run/openstack
 
 # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
 # "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
@@ -1415,21 +1475,26 @@
 
 # The default number of seconds that poll should wait. Poll raises timeout
 # exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
 #rpc_poll_timeout = 1
 
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
 #zmq_target_update = 180
 
 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
 # value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
 #use_router_proxy = false
 
 # This option makes direct connections dynamic or static. It makes sense only
@@ -1444,20 +1509,24 @@
 # Minimal port number for random ports range. (port value)
 # Minimum value: 0
 # Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
 #rpc_zmq_min_port = 49153
 
 # Maximal port number for random ports range. (integer value)
 # Minimum value: 1
 # Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
 #rpc_zmq_max_port = 65536
 
 # Number of retries to find free port number before fail with ZMQBindError.
 # (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
 #rpc_zmq_serialization = json
 
 # This option configures round-robin mode in zmq socket. True means not keeping
@@ -1541,9 +1610,12 @@
 #
 
 # The file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
 #policy_file = policy.json
+policy_file = /etc/aodh/policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
 #policy_default_rule = default
 
 # Directories where policy configuration files are stored. They can be relative
@@ -1551,6 +1623,7 @@
 # absolute paths. The file defined by policy_file must exist for these
 # directories to be searched.  Missing or empty directories are ignored. (multi
 # valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
 #policy_dirs = policy.d
 
 
@@ -1563,12 +1636,14 @@
 # Region name to use for OpenStack service endpoints. (string value)
 # Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
+region_name = RegionOne
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
 # Allowed values: public, internal, admin, auth, publicURL, internalURL, adminURL
 # Deprecated group/name - [service_credentials]/os_endpoint_type
 #interface = public
+interface = internalURL
 
 #
 # From aodh-auth
@@ -1577,12 +1652,14 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [service_credentials]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://172.16.10.36:5000
 
 # Domain ID to scope to (string value)
 #domain_id = <None>
@@ -1591,15 +1668,17 @@
 #domain_name = <None>
 
 # Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
+# Deprecated group/name - [service_credentials]/tenant-id
 #project_id = <None>
 
 # Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
+# Deprecated group/name - [service_credentials]/tenant-name
 #project_name = <None>
+project_name = service
 
 # Domain ID containing project (string value)
 #project_domain_id = <None>
+project_domain_id = default
 
 # Domain name containing project (string value)
 #project_domain_name = <None>
@@ -1621,17 +1700,19 @@
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
+# Deprecated group/name - [service_credentials]/user-name
 #username = <None>
+username = aodh
 
 # User's domain id (string value)
 #user_domain_id = <None>
-
+user_domain_id = default
 # User's domain name (string value)
 #user_domain_name = <None>
 
 # User's password (string value)
 #password = <None>
+password = opnfv_secret
 
 
 [service_types]

2018-05-09 23:36:18,934 [salt.state       ][INFO    ][6297] Completed state [/etc/aodh/aodh.conf] at time 23:36:18.934143 duration_in_ms=196.578
2018-05-09 23:36:18,934 [salt.state       ][INFO    ][6297] Running state [/etc/default/aodh-evaluator] at time 23:36:18.934584
2018-05-09 23:36:18,934 [salt.state       ][INFO    ][6297] Executing state file.managed for /etc/default/aodh-evaluator
2018-05-09 23:36:18,952 [salt.fileclient  ][INFO    ][6297] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-05-09 23:36:18,955 [salt.state       ][INFO    ][6297] File changed:
New file
2018-05-09 23:36:18,955 [salt.state       ][INFO    ][6297] Completed state [/etc/default/aodh-evaluator] at time 23:36:18.955919 duration_in_ms=21.335
2018-05-09 23:36:18,956 [salt.state       ][INFO    ][6297] Running state [/etc/default/aodh-notifier] at time 23:36:18.956286
2018-05-09 23:36:18,956 [salt.state       ][INFO    ][6297] Executing state file.managed for /etc/default/aodh-notifier
2018-05-09 23:36:18,972 [salt.state       ][INFO    ][6297] File changed:
New file
2018-05-09 23:36:18,972 [salt.state       ][INFO    ][6297] Completed state [/etc/default/aodh-notifier] at time 23:36:18.972500 duration_in_ms=16.214
2018-05-09 23:36:18,972 [salt.state       ][INFO    ][6297] Running state [/etc/default/aodh-listener] at time 23:36:18.972858
2018-05-09 23:36:18,973 [salt.state       ][INFO    ][6297] Executing state file.managed for /etc/default/aodh-listener
2018-05-09 23:36:18,988 [salt.state       ][INFO    ][6297] File changed:
New file
2018-05-09 23:36:18,988 [salt.state       ][INFO    ][6297] Completed state [/etc/default/aodh-listener] at time 23:36:18.988234 duration_in_ms=15.375
2018-05-09 23:36:18,989 [salt.state       ][INFO    ][6297] Running state [aodh-dbsync] at time 23:36:18.989569
2018-05-09 23:36:18,989 [salt.state       ][INFO    ][6297] Executing state cmd.run for aodh-dbsync
2018-05-09 23:36:18,990 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command 'aodh-dbsync' in directory '/root'
2018-05-09 23:36:20,040 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233620049451
2018-05-09 23:36:20,057 [salt.minion      ][INFO    ][13285] Starting a new job with PID 13285
2018-05-09 23:36:20,079 [salt.minion      ][INFO    ][13285] Returning information for job: 20180509233620049451
2018-05-09 23:36:21,702 [salt.state       ][INFO    ][6297] {'pid': 13266, 'retcode': 0, 'stderr': '/usr/lib/python2.7/dist-packages/pymysql/cursors.py:166: Warning: (1287, u"\'@@tx_isolation\' is deprecated and will be removed in a future release. Please use \'@@transaction_isolation\' instead")\n  result = self._query(query)', 'stdout': ''}
2018-05-09 23:36:21,703 [salt.state       ][INFO    ][6297] Completed state [aodh-dbsync] at time 23:36:21.703518 duration_in_ms=2713.947
2018-05-09 23:36:21,704 [salt.state       ][INFO    ][6297] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 23:36:21.704159
2018-05-09 23:36:21,704 [salt.state       ][INFO    ][6297] Executing state file.managed for /etc/apache2/sites-available/aodh-api.conf
2018-05-09 23:36:21,729 [salt.fileclient  ][INFO    ][6297] Fetching file from saltenv 'base', ** done ** 'aodh/files/pike/apache-aodh.apache2.conf.Debian'
2018-05-09 23:36:21,766 [salt.state       ][INFO    ][6297] File changed:
--- 
+++ 
@@ -1,18 +1,5 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 172.16.10.36:8042
 
 <VirtualHost *:8042>
     WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-05-09 23:36:21,766 [salt.state       ][INFO    ][6297] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 23:36:21.766789 duration_in_ms=62.63
2018-05-09 23:36:21,767 [salt.state       ][INFO    ][6297] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 23:36:21.767054
2018-05-09 23:36:21,767 [salt.state       ][INFO    ][6297] Executing state file.symlink for /etc/apache2/sites-enabled/aodh-api.conf
2018-05-09 23:36:21,769 [salt.state       ][INFO    ][6297] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-05-09 23:36:21,769 [salt.state       ][INFO    ][6297] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 23:36:21.769821 duration_in_ms=2.767
2018-05-09 23:36:21,771 [salt.state       ][INFO    ][6297] Running state [apache2] at time 23:36:21.771763
2018-05-09 23:36:21,772 [salt.state       ][INFO    ][6297] Executing state service.running for apache2
2018-05-09 23:36:21,772 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-05-09 23:36:21,795 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:36:21,815 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:36:21,834 [salt.state       ][INFO    ][6297] The service apache2 is already running
2018-05-09 23:36:21,835 [salt.state       ][INFO    ][6297] Completed state [apache2] at time 23:36:21.835049 duration_in_ms=63.286
2018-05-09 23:36:21,835 [salt.state       ][INFO    ][6297] Running state [apache2] at time 23:36:21.835308
2018-05-09 23:36:21,835 [salt.state       ][INFO    ][6297] Executing state service.mod_watch for apache2
2018-05-09 23:36:21,836 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:36:21,850 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:36:21,872 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-05-09 23:36:30,261 [salt.state       ][INFO    ][6297] {'apache2': True}
2018-05-09 23:36:30,262 [salt.state       ][INFO    ][6297] Completed state [apache2] at time 23:36:30.261901 duration_in_ms=8426.583
2018-05-09 23:36:30,265 [salt.state       ][INFO    ][6297] Running state [aodh-evaluator] at time 23:36:30.265757
2018-05-09 23:36:30,267 [salt.state       ][INFO    ][6297] Executing state service.running for aodh-evaluator
2018-05-09 23:36:30,267 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233630265256
2018-05-09 23:36:30,268 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-05-09 23:36:30,285 [salt.minion      ][INFO    ][13649] Starting a new job with PID 13649
2018-05-09 23:36:30,299 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-05-09 23:36:30,315 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-05-09 23:36:30,320 [salt.minion      ][INFO    ][13649] Returning information for job: 20180509233630265256
2018-05-09 23:36:30,331 [salt.state       ][INFO    ][6297] The service aodh-evaluator is already running
2018-05-09 23:36:30,333 [salt.state       ][INFO    ][6297] Completed state [aodh-evaluator] at time 23:36:30.332891 duration_in_ms=67.132
2018-05-09 23:36:30,333 [salt.state       ][INFO    ][6297] Running state [aodh-evaluator] at time 23:36:30.333809
2018-05-09 23:36:30,334 [salt.state       ][INFO    ][6297] Executing state service.mod_watch for aodh-evaluator
2018-05-09 23:36:30,336 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-05-09 23:36:30,363 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-05-09 23:36:30,385 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-05-09 23:36:30,524 [salt.state       ][INFO    ][6297] {'aodh-evaluator': True}
2018-05-09 23:36:30,525 [salt.state       ][INFO    ][6297] Completed state [aodh-evaluator] at time 23:36:30.524988 duration_in_ms=191.178
2018-05-09 23:36:30,525 [salt.state       ][INFO    ][6297] Running state [aodh-notifier] at time 23:36:30.525903
2018-05-09 23:36:30,526 [salt.state       ][INFO    ][6297] Executing state service.running for aodh-notifier
2018-05-09 23:36:30,527 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-05-09 23:36:30,547 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-05-09 23:36:30,567 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-05-09 23:36:30,606 [salt.state       ][INFO    ][6297] The service aodh-notifier is already running
2018-05-09 23:36:30,607 [salt.state       ][INFO    ][6297] Completed state [aodh-notifier] at time 23:36:30.607469 duration_in_ms=81.566
2018-05-09 23:36:30,608 [salt.state       ][INFO    ][6297] Running state [aodh-notifier] at time 23:36:30.607750
2018-05-09 23:36:30,608 [salt.state       ][INFO    ][6297] Executing state service.mod_watch for aodh-notifier
2018-05-09 23:36:30,609 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-05-09 23:36:30,625 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-05-09 23:36:30,641 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-05-09 23:36:40,299 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233640306839
2018-05-09 23:36:40,324 [salt.minion      ][INFO    ][13770] Starting a new job with PID 13770
2018-05-09 23:36:40,355 [salt.minion      ][INFO    ][13770] Returning information for job: 20180509233640306839
2018-05-09 23:36:44,981 [salt.state       ][INFO    ][6297] {'aodh-notifier': True}
2018-05-09 23:36:44,981 [salt.state       ][INFO    ][6297] Completed state [aodh-notifier] at time 23:36:44.981867 duration_in_ms=14374.116
2018-05-09 23:36:44,982 [salt.state       ][INFO    ][6297] Running state [aodh-listener] at time 23:36:44.982723
2018-05-09 23:36:44,983 [salt.state       ][INFO    ][6297] Executing state service.running for aodh-listener
2018-05-09 23:36:44,983 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-05-09 23:36:45,002 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-05-09 23:36:45,020 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-05-09 23:36:45,035 [salt.state       ][INFO    ][6297] The service aodh-listener is already running
2018-05-09 23:36:45,036 [salt.state       ][INFO    ][6297] Completed state [aodh-listener] at time 23:36:45.036281 duration_in_ms=53.557
2018-05-09 23:36:45,036 [salt.state       ][INFO    ][6297] Running state [aodh-listener] at time 23:36:45.036547
2018-05-09 23:36:45,036 [salt.state       ][INFO    ][6297] Executing state service.mod_watch for aodh-listener
2018-05-09 23:36:45,037 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-05-09 23:36:45,051 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-05-09 23:36:45,064 [salt.loaded.int.module.cmdmod][INFO    ][6297] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-05-09 23:36:49,639 [salt.state       ][INFO    ][6297] {'aodh-listener': True}
2018-05-09 23:36:49,639 [salt.state       ][INFO    ][6297] Completed state [aodh-listener] at time 23:36:49.639793 duration_in_ms=4603.246
2018-05-09 23:36:49,651 [salt.minion      ][INFO    ][6297] Returning information for job: 20180509233539628954
2018-05-09 23:36:50,422 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509233650433769
2018-05-09 23:36:50,447 [salt.minion      ][INFO    ][13903] Starting a new job with PID 13903
2018-05-09 23:36:52,982 [salt.state       ][INFO    ][13903] Loading fresh modules for state activity
2018-05-09 23:36:53,044 [salt.fileclient  ][INFO    ][13903] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-05-09 23:36:53,071 [salt.fileclient  ][INFO    ][13903] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-05-09 23:36:54,445 [salt.state       ][INFO    ][13903] Running state [ceilometer-api] at time 23:36:54.445840
2018-05-09 23:36:54,446 [salt.state       ][INFO    ][13903] Executing state pkg.installed for ceilometer-api
2018-05-09 23:36:54,446 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:36:54,907 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-api'] in directory '/root'
2018-05-09 23:36:55,007 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:36:57,581 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:36:57,623 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-api'] in directory '/root'
2018-05-09 23:37:00,534 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233700541779
2018-05-09 23:37:00,553 [salt.minion      ][INFO    ][14310] Starting a new job with PID 14310
2018-05-09 23:37:00,574 [salt.minion      ][INFO    ][14310] Returning information for job: 20180509233700541779
2018-05-09 23:37:10,552 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233710563126
2018-05-09 23:37:10,566 [salt.minion      ][INFO    ][14559] Starting a new job with PID 14559
2018-05-09 23:37:10,588 [salt.minion      ][INFO    ][14559] Returning information for job: 20180509233710563126
2018-05-09 23:37:20,768 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233720777153
2018-05-09 23:37:20,788 [salt.minion      ][INFO    ][16300] Starting a new job with PID 16300
2018-05-09 23:37:20,815 [salt.minion      ][INFO    ][16300] Returning information for job: 20180509233720777153
2018-05-09 23:37:25,366 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:37:25,431 [salt.state       ][INFO    ][13903] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1~cloud0'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.10+dfsg-0ubuntu3.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20150424.a25a16d-1ubuntu1.2'
'qemu-system-x86-64' changed from 'absent' to '1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.10+dfsg-0ubuntu3.5~cloud0'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.5'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'qemu-keymaps' changed from 'absent' to '1'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libvirt0' changed from 'absent' to '3.6.0-1ubuntu6.6~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.10+dfsg-0ubuntu3.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'python-libvirt' changed from 'absent' to '3.5.0-1build1~cloud0'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'ceilometer-api' changed from 'absent' to '1:9.0.5-0ubuntu1~cloud0'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1ubuntu1~cloud0'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python2.7-twisted-core' changed from 'absent' to '1'
'ceilometer-common' changed from 'absent' to '1:9.0.5-0ubuntu1~cloud0'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libvirt-daemon' changed from 'absent' to '3.6.0-1ubuntu6.6~cloud0'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'librados2' changed from 'absent' to '12.2.4-0ubuntu0.17.10.1~cloud0'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.4-0ubuntu0.17.10.1~cloud0'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'qemu-block-extra' changed from 'absent' to '1:2.10+dfsg-0ubuntu3.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'qemu-utils' changed from 'absent' to '1:2.10+dfsg-0ubuntu3.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:9.0.5-0ubuntu1~cloud0'
'python-attr' changed from 'absent' to '15.2.0-1'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-jsonpath-rw-ext' changed from 'absent' to '0.1.9-1'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-05-09 23:37:25,463 [salt.state       ][INFO    ][13903] Loading fresh modules for state activity
2018-05-09 23:37:25,525 [salt.state       ][INFO    ][13903] Completed state [ceilometer-api] at time 23:37:25.525611 duration_in_ms=31079.771
2018-05-09 23:37:25,537 [salt.state       ][INFO    ][13903] Running state [ceilometer-agent-central] at time 23:37:25.537507
2018-05-09 23:37:25,537 [salt.state       ][INFO    ][13903] Executing state pkg.installed for ceilometer-agent-central
2018-05-09 23:37:25,999 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:37:26,032 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-05-09 23:37:29,400 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:37:29,459 [salt.state       ][INFO    ][13903] Made the following changes:
'ceilometer-agent-central' changed from 'absent' to '1:9.0.5-0ubuntu1~cloud0'

2018-05-09 23:37:29,482 [salt.state       ][INFO    ][13903] Loading fresh modules for state activity
2018-05-09 23:37:29,518 [salt.state       ][INFO    ][13903] Completed state [ceilometer-agent-central] at time 23:37:29.518705 duration_in_ms=3981.198
2018-05-09 23:37:29,536 [salt.state       ][INFO    ][13903] Running state [python-ceilometerclient] at time 23:37:29.536060
2018-05-09 23:37:29,536 [salt.state       ][INFO    ][13903] Executing state pkg.installed for python-ceilometerclient
2018-05-09 23:37:30,051 [salt.state       ][INFO    ][13903] All specified packages are already installed
2018-05-09 23:37:30,052 [salt.state       ][INFO    ][13903] Completed state [python-ceilometerclient] at time 23:37:30.052608 duration_in_ms=516.548
2018-05-09 23:37:30,053 [salt.state       ][INFO    ][13903] Running state [ceilometer-agent-notification] at time 23:37:30.053393
2018-05-09 23:37:30,053 [salt.state       ][INFO    ][13903] Executing state pkg.installed for ceilometer-agent-notification
2018-05-09 23:37:30,076 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:37:30,118 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-05-09 23:37:30,984 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233730999861
2018-05-09 23:37:31,000 [salt.minion      ][INFO    ][16848] Starting a new job with PID 16848
2018-05-09 23:37:31,024 [salt.minion      ][INFO    ][16848] Returning information for job: 20180509233730999861
2018-05-09 23:37:33,966 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:37:34,029 [salt.state       ][INFO    ][13903] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:9.0.5-0ubuntu1~cloud0'

2018-05-09 23:37:34,055 [salt.state       ][INFO    ][13903] Loading fresh modules for state activity
2018-05-09 23:37:34,092 [salt.state       ][INFO    ][13903] Completed state [ceilometer-agent-notification] at time 23:37:34.092308 duration_in_ms=4038.914
2018-05-09 23:37:34,105 [salt.state       ][INFO    ][13903] Running state [python-elasticsearch] at time 23:37:34.105533
2018-05-09 23:37:34,105 [salt.state       ][INFO    ][13903] Executing state pkg.installed for python-elasticsearch
2018-05-09 23:37:34,571 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:37:34,611 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-elasticsearch'] in directory '/root'
2018-05-09 23:37:36,964 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:37:37,158 [salt.state       ][INFO    ][13903] Made the following changes:
'python-elasticsearch' changed from 'absent' to '1.6.0-1'

2018-05-09 23:37:37,179 [salt.state       ][INFO    ][13903] Loading fresh modules for state activity
2018-05-09 23:37:37,210 [salt.state       ][INFO    ][13903] Completed state [python-elasticsearch] at time 23:37:37.210706 duration_in_ms=3105.172
2018-05-09 23:37:37,224 [salt.state       ][INFO    ][13903] Running state [python-influxdb] at time 23:37:37.224683
2018-05-09 23:37:37,224 [salt.state       ][INFO    ][13903] Executing state pkg.installed for python-influxdb
2018-05-09 23:37:37,686 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:37:37,725 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-influxdb'] in directory '/root'
2018-05-09 23:37:39,974 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:37:40,048 [salt.state       ][INFO    ][13903] Made the following changes:
'python-influxdb' changed from 'absent' to '2.12.0-1'

2018-05-09 23:37:40,073 [salt.state       ][INFO    ][13903] Loading fresh modules for state activity
2018-05-09 23:37:40,107 [salt.state       ][INFO    ][13903] Completed state [python-influxdb] at time 23:37:40.107766 duration_in_ms=2883.082
2018-05-09 23:37:40,120 [salt.state       ][INFO    ][13903] Running state [python-pymongo] at time 23:37:40.120698
2018-05-09 23:37:40,120 [salt.state       ][INFO    ][13903] Executing state pkg.installed for python-pymongo
2018-05-09 23:37:40,575 [salt.state       ][INFO    ][13903] All specified packages are already installed
2018-05-09 23:37:40,576 [salt.state       ][INFO    ][13903] Completed state [python-pymongo] at time 23:37:40.576267 duration_in_ms=455.57
2018-05-09 23:37:40,579 [salt.state       ][INFO    ][13903] Running state [/etc/ceilometer/ceilometer.conf] at time 23:37:40.579404
2018-05-09 23:37:40,579 [salt.state       ][INFO    ][13903] Executing state file.managed for /etc/ceilometer/ceilometer.conf
2018-05-09 23:37:40,604 [salt.fileclient  ][INFO    ][13903] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/ceilometer-server.conf.Debian'
2018-05-09 23:37:40,760 [salt.state       ][INFO    ][13903] File changed:
--- 
+++ 
@@ -1,2157 +1,60 @@
 [DEFAULT]
-
-#
-# From ceilometer
-#
-
-# To reduce polling agent load, samples are sent to the notification agent in a
-# batch. To gain higher throughput at the cost of load set this to False.
-# (boolean value)
-#batch_polled_samples = true
-
-# To reduce large requests at same time to Nova or other components from
-# different compute agents, shuffle start time of polling task. (integer value)
-#shuffle_time_before_polling_task = 0
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
-# Inspector to use for inspecting the hypervisor layer. Known inspectors are
-# libvirt, hyperv, vsphere and xenapi. (string value)
-#hypervisor_inspector = libvirt
-
-# Libvirt domain type. (string value)
-# Allowed values: kvm, lxc, qemu, uml, xen
-#libvirt_type = kvm
-
-# Override the default libvirt URI (which is dependent on libvirt_type).
-# (string value)
-#libvirt_uri =
-
-# DEPRECATED: Dispatchers to process metering data. (multi valued)
-# Deprecated group/name - [DEFAULT]/dispatcher
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: This option only be used in collector service, the collector service
-# has been deprecated and will be removed in the future, this should also be
-# deprecated for removal with collector service.
-#meter_dispatchers =
-
-# DEPRECATED: Dispatchers to process event data. (multi valued)
-# Deprecated group/name - [DEFAULT]/dispatcher
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: This option only be used in collector service, the collector service
-# has been deprecated and will be removed in the future, this should also be
-# deprecated for removal with collector service.
-#event_dispatchers =
-
-# Exchange name for Ironic notifications. (string value)
-#ironic_exchange = ironic
-
-# DEPRECATED: Allow novaclient's debug log output. (Use default_log_levels
-# instead) (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#nova_http_log_debug = false
-
-# Swift reseller prefix. Must be on par with reseller_prefix in proxy-
-# server.conf. (string value)
-#reseller_prefix = AUTH_
-
-# Configuration file for pipeline definition. (string value)
-#pipeline_cfg_file = pipeline.yaml
-
-# Configuration file for event pipeline definition. (string value)
-#event_pipeline_cfg_file = event_pipeline.yaml
-
-# Source for samples emitted on this instance. (string value)
-#sample_source = openstack
-
-# List of metadata prefixes reserved for metering use. (list value)
-#reserved_metadata_namespace = metering.
-
-# Limit on length of reserved metadata values. (integer value)
-#reserved_metadata_length = 256
-
-# List of metadata keys reserved for metering use. And these keys are
-# additional to the ones included in the namespace. (list value)
-#reserved_metadata_keys =
-
-# Path to the rootwrap configuration file to use for running commands as root
-# (string value)
-#rootwrap_config = /etc/ceilometer/rootwrap.conf
-
-# DEPRECATED: Exchange name for Nova notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#nova_control_exchange = nova
-
-# DEPRECATED: Exchange name for Neutron notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#neutron_control_exchange = neutron
-
-# DEPRECATED: Exchange name for Heat notifications (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#heat_control_exchange = heat
-
-# DEPRECATED: Exchange name for Glance notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#glance_control_exchange = glance
-
-# DEPRECATED: Exchange name for Keystone notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#keystone_control_exchange = keystone
-
-# DEPRECATED: Exchange name for Cinder notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#cinder_control_exchange = cinder
-
-# DEPRECATED: Exchange name for Data Processing notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#sahara_control_exchange = sahara
-
-# DEPRECATED: Exchange name for Swift notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#swift_control_exchange = swift
-
-# DEPRECATED: Exchange name for Magnum notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#magnum_control_exchange = magnum
-
-# DEPRECATED: Exchange name for DBaaS notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#trove_control_exchange = trove
-
-# DEPRECATED: Exchange name for Messaging service notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#zaqar_control_exchange = zaqar
-
-# DEPRECATED: Exchange name for DNS service notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#dns_control_exchange = central
-
-# DEPRECATED: Exchange name for ceilometer notifications. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use notification_control_exchanges instead
-#ceilometer_control_exchange = ceilometer
-
-# Name of this node, which must be valid in an AMQP key. Can be an opaque
-# identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
-#host = <your_hostname>
-
-# Timeout seconds for HTTP requests. Set it to None to disable timeout.
-# (integer value)
-#http_timeout = 600
-
-# Maximum number of parallel requests for services to handle at the same time.
-# (integer value)
-# Minimum value: 1
-#max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# A URL representing the messaging driver to use and its full configuration.
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[api]
-
-#
-# From ceilometer
-#
-
-# Default maximum number of items returned by API request. (integer value)
-# Minimum value: 1
-#default_api_return_limit = 100
-
-# Set True to disable resource/meter/sample URLs. Default autodetection by
-# querying keystone. (boolean value)
-#gnocchi_is_enabled = <None>
-
-# Set True to redirect alarms URLs to aodh. Default autodetection by querying
-# keystone. (boolean value)
-#aodh_is_enabled = <None>
-
-# The endpoint of Aodh to redirect alarms URLs to Aodh API. Default
-# autodetection by querying keystone. (string value)
-#aodh_url = <None>
-
-# Set True to redirect events URLs to Panko. Default autodetection by querying
-# keystone. (boolean value)
-#panko_is_enabled = <None>
-
-# The endpoint of Panko to redirect events URLs to Panko API. Default
-# autodetection by querying keystone. (string value)
-#panko_url = <None>
-
-
-[collector]
-
-#
-# From ceilometer
-#
-
-# Address to which the UDP socket is bound. Set to an empty string to disable.
-# (unknown value)
-#udp_address = 0.0.0.0
-
-# Port to which the UDP socket is bound. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#udp_port = 4952
-
-# Number of notification messages to wait before dispatching them (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely) (integer value)
-#batch_timeout = <None>
-
-# Number of workers for collector service. default value is 1. (integer value)
-# Minimum value: 1
-# Deprecated group/name - [DEFAULT]/collector_workers
-#workers = 1
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Enable work-load partitioning, allowing multiple compute agents
-# to be run simultaneously. (replaced by instance_discovery_method) (boolean
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#workload_partitioning = false
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Allowed values: naive, workload_partitioning, libvirt_metadata
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline.  (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will works only
-# when 'instance_discovery_method' was set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
-
+executor_thread_pool_size = 5
+transport_url = rabbit://openstack:opnfv_secret@172.16.10.36:5672//openstack
 
 [coordination]
-
-#
-# From ceilometer
-#
-
-# The backend URL to use for distributed coordination. If left empty, per-
-# deployment central agent and per-host compute agent won't do workload
-# partitioning and will only function correctly if a single instance of that
-# service is running. (string value)
-#backend_url = <None>
-
-# Number of seconds between checks to see if group membership has changed
-# (floating point value)
-#check_watchers = 10.0
 
 
 [cors]
 
-#
-# From oslo.middleware.cors
-#
 
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
 
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
 
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
 
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
 
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
 
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
+
+
+
+
+
+
 
 
 [database]
-
-#
-# From ceilometer
-#
-
-# Number of seconds that samples are kept in the database for (<= 0 means
-# forever). (integer value)
-# Deprecated group/name - [database]/time_to_live
-#metering_time_to_live = -1
-
-# The connection string used to connect to the metering database. (if unset,
-# connection is used) (string value)
-#metering_connection = <None>
-
-# Indicates if expirer expires only samples. If set true, expired samples will
-# be deleted, but residual resource and meter definition data will remain.
-# (boolean value)
-#sql_expire_samples_only = false
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Timeout before idle SQL connections are reaped. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#idle_timeout = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-
-[dispatcher_file]
-
-#
-# From ceilometer
-#
-
-# Name and the location of the file to record meters. (string value)
-#file_path = <None>
-
-# The max size of the file. (integer value)
-#max_bytes = 0
-
-# The max number of the files to keep. (integer value)
-#backup_count = 0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# Filter out samples generated by Gnocchi service activity (boolean value)
-#filter_service_activity = true
-
-# Gnocchi project used to filter out samples generated by Gnocchi service
-# activity (string value)
-#filter_project = gnocchi
-
-# The archive policy to use when the dispatcher create a new metric. (string
-# value)
-#archive_policy = <None>
-
-# The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-#resources_definition_file = gnocchi_resources.yaml
-
-# Number of seconds before request to gnocchi times out (floating point value)
-# Minimum value: 0
-#request_timeout = 6.05
-
-
-[dispatcher_http]
-
-#
-# From ceilometer
-#
-
-# The target where the http request will be sent. If this is not set, no data
-# will be posted. For example: target = http://hostname:1234/path (string
-# value)
-#target =
-
-# The target for event data where the http request will be sent to. If this is
-# not set, it will default to same as Sample target. (string value)
-#event_target = <None>
-
-# The max time in seconds to wait for a request to timeout. (integer value)
-#timeout = 5
-
-# The path to a server certificate or directory if the system CAs are not used
-# or if a self-signed certificate is used. Set to False to ignore SSL cert
-# verification. (string value)
-#verify_ssl = <None>
-
-# Indicates whether samples are published in a batch. (boolean value)
-#batch_mode = false
-
-
-[event]
-
-#
-# From ceilometer
-#
-
-# Configuration file for event definitions. (string value)
-#definitions_cfg_file = event_definitions.yaml
-
-# Drop notifications if no event definition matches. (Otherwise, we convert
-# them with just the default traits) (boolean value)
-#drop_unmatched_notifications = false
-
-# Store the raw notification for select priority levels (info and/or error). By
-# default, raw details are not captured. (multi valued)
-#store_raw =
-
-
-[hardware]
-
-#
-# From ceilometer
-#
-
-# URL scheme to use for hardware nodes. (string value)
-#url_scheme = snmp://
-
-# SNMPd user name of all nodes running in the cloud. (string value)
-#readonly_user_name = ro_snmp_user
-
-# SNMPd v3 authentication password of all the nodes running in the cloud.
-# (string value)
-#readonly_user_password = password
-
-# SNMPd v3 authentication algorithm of all the nodes running in the cloud
-# (string value)
-# Allowed values: md5, sha
-#readonly_user_auth_proto = <None>
-
-# SNMPd v3 encryption algorithm of all the nodes running in the cloud (string
-# value)
-# Allowed values: des, aes128, 3des, aes192, aes256
-#readonly_user_priv_proto = <None>
-
-# SNMPd v3 encryption password of all the nodes running in the cloud. (string
-# value)
-#readonly_user_priv_password = <None>
-
-# Name of the control plane Tripleo network (string value)
-#tripleo_network_name = ctlplane
-
-# Configuration file for defining hardware snmp meters. (string value)
-#meter_definitions_file = snmp.yaml
-
-
-[ipmi]
-
-#
-# From ceilometer
-#
-
-# Number of retries upon Intel Node Manager initialization failure (integer
-# value)
-#node_manager_init_retry = 3
-
-# Tolerance of IPMI/NM polling failures before disable this pollster. Negative
-# indicates retrying forever. (integer value)
-#polling_retry = 3
-
+connection=mongodb://ceilometer:opnfv_secret@172.16.10.36:27017/ceilometer
 
 [keystone_authtoken]
 
-#
-# From keystonemiddleware.auth_token
-#
-
-# Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should ideally be unversioned, client support in the
-# wild varies. If you're using a versioned v2 endpoint here, then this should
-# *not* be the same endpoint the service user utilizes for validating tokens,
-# because normal end users may not be able to reach that endpoint. (string
-# value)
-#auth_uri = <None>
-
-# API version of the admin Identity API endpoint. (string value)
-#auth_version = <None>
-
-# Do not handle authorization requests within the middleware, but delegate the
-# authorization decision to downstream WSGI components. (boolean value)
-#delay_auth_decision = false
-
-# Request timeout value for communicating with Identity API server. (integer
-# value)
-#http_connect_timeout = <None>
-
-# How many times are we trying to reconnect when communicating with Identity
-# API Server. (integer value)
-#http_request_max_retries = 3
-
-# Request environment key where the Swift cache object is stored. When
-# auth_token middleware is deployed with a Swift cache, use this option to have
-# the middleware share a caching backend with swift. Otherwise, use the
-# ``memcached_servers`` option instead. (string value)
-#cache = <None>
-
-# Required if identity server requires client certificate (string value)
-#certfile = <None>
-
-# Required if identity server requires client certificate (string value)
-#keyfile = <None>
-
-# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# Defaults to system CAs. (string value)
-#cafile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# The region in which the identity server can be found. (string value)
-#region_name = <None>
-
-# DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P
-# release. (string value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#signing_dir = <None>
-
-# Optionally specify a list of memcached server(s) to use for caching. If left
-# undefined, tokens will instead be cached in-process. (list value)
-# Deprecated group/name - [keystone_authtoken]/memcache_servers
-#memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Allowed values: None, MAC, ENCRYPT
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead before it is
-# tried again. (integer value)
-#memcache_pool_dead_retry = 300
-
-# (Optional) Maximum total number of open connections to every memcached
-# server. (integer value)
-#memcache_pool_maxsize = 10
-
-# (Optional) Socket timeout in seconds for communicating with a memcached
-# server. (integer value)
-#memcache_pool_socket_timeout = 3
-
-# (Optional) Number of seconds a connection to memcached is held unused in the
-# pool before it is closed. (integer value)
-#memcache_pool_unused_timeout = 60
-
-# (Optional) Number of seconds that an operation will wait to get a memcached
-# client connection from the pool. (integer value)
-#memcache_pool_conn_get_timeout = 10
-
-# (Optional) Use the advanced (eventlet safe) memcached client pool. The
-# advanced pool will only work under python 2.x. (boolean value)
-#memcache_use_advanced_pool = false
-
-# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
-# middleware will not ask for service catalog on token validation and will not
-# set the X-Service-Catalog header. (boolean value)
-#include_service_catalog = true
-
-# Used to control the use and type of token binding. Can be set to: "disabled"
-# to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it
-# if not. "strict" like "permissive" but if the bind type is unknown the token
-# will be rejected. "required" any form of token binding is needed to be
-# allowed. Finally the name of a binding method that must be present in tokens.
-# (string value)
-#enforce_token_bind = permissive
-
-# DEPRECATED: If true, the revocation list will be checked for cached tokens.
-# This requires that PKI tokens are configured on the identity server. (boolean
-# value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#check_revocations_for_cached = false
-
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
-# single algorithm or multiple. The algorithms are those supported by Python
-# standard hashlib.new(). The hashes will be tried in the order given, so put
-# the preferred one first for performance. The result of the first hash will be
-# stored in the cache. This will typically be set to multiple values only while
-# migrating from a less secure algorithm to a more secure one. Once all the old
-# tokens are expired this option should be set to a single value for better
-# performance. (list value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#hash_algorithms = md5
-
-# A choice of roles that must be present in a service token. Service tokens are
-# allowed to request that an expired token can be used and so this check should
-# tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present.
-# For backwards compatibility reasons this currently only affects the
-# allow_expired check. (list value)
-#service_token_roles = service
-
-# For backwards compatibility reasons we must let valid service tokens pass
-# that don't pass the service_token_roles check as valid. Setting this true
-# will become the default in a future release and should be enabled if
-# possible. (boolean value)
-#service_token_roles_required = false
-
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Allowed values: http, https
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
-# Authentication type to load (string value)
-# Deprecated group/name - [keystone_authtoken]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[meter]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Configuration file for defining meter notifications. This option
-# is deprecated and use meter_definitions_dirs to configure meter notification
-# file. Meter definitions configuration file will be sought according to the
-# parameter. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#meter_definitions_cfg_file = <None>
-
-# List directory to find files of defining meter notifications. (multi valued)
-#meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-DOd_sj/ceilometer-9.0.5/ceilometer/data/meters.d
-
-
-[notification]
-
-#
-# From ceilometer
-#
-
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
-# Minimum value: 1
-#pipeline_processing_queues = 10
-
-# Acknowledge message when event persistence fails. (boolean value)
-#ack_on_event_error = true
-
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
-#workload_partitioning = false
-
-# Messaging URLs to listen for notifications. Example:
-# rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
-# (DEFAULT/transport_url is used if empty). This is useful when you have
-# dedicate messaging nodes for each service, for example, all nova
-# notifications go to rabbit-nova:5672, while all cinder notifications go to
-# rabbit-cinder:5672. (multi valued)
-#messaging_urls =
-
-# Number of notification messages to wait before publishing them. Batching is
-# advised when transformations are applied in pipeline. (integer value)
-# Minimum value: 1
-#batch_size = 100
-
-# Number of seconds to wait before publishing samples when batch_size is not
-# reached (None means indefinitely) (integer value)
-#batch_timeout = 5
-
-# Number of workers for notification service, default value is 1. (integer
-# value)
-# Minimum value: 1
-# Deprecated group/name - [DEFAULT]/notification_workers
-#workers = 1
-
-# Exchanges name to listen for notifications. (multi valued)
-# Deprecated group/name - [DEFAULT]/http_control_exchanges
-#notification_control_exchanges = nova
-#notification_control_exchanges = glance
-#notification_control_exchanges = neutron
-#notification_control_exchanges = cinder
-#notification_control_exchanges = heat
-#notification_control_exchanges = keystone
-#notification_control_exchanges = sahara
-#notification_control_exchanges = trove
-#notification_control_exchanges = zaqar
-#notification_control_exchanges = swift
-#notification_control_exchanges = ceilometer
-#notification_control_exchanges = magnum
-#notification_control_exchanges = dns
-
-
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# Pool Size for Kafka Consumers (integer value)
-#pool_size = 10
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = ceilometer
+password = opnfv_secret
+auth_uri = http://172.16.10.36:5000
+auth_url = http://172.16.10.36:35357
+interface = internal
+token_cache_time = -1
 
 [oslo_messaging_notifications]
 
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
+topics = notifications
 
 [oslo_messaging_rabbit]
 
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Allowed values: round-robin, shuffle
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Allowed values: new, single, read_write
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Allowed values: redis, sentinel, dummy
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-
-[polling]
-
-#
-# From ceilometer
-#
-
-# Configuration file for pipeline definition. (string value)
-#cfg_file = polling.yaml
-
-# Work-load partitioning group prefix. Use only if you want to run multiple
-# polling agents with different config files. For each sub-group of the agent
-# pool with the same partitioning_group_prefix a disjoint subset of pollsters
-# should be loaded. (string value)
-#partitioning_group_prefix = <None>
-
-
 [publisher]
-
-#
-# From ceilometer
-#
-
-# Secret value for signing messages. Set value empty if signing is not required
-# to avoid computational overhead. (string value)
-# Deprecated group/name - [DEFAULT]/metering_secret
-# Deprecated group/name - [publisher_rpc]/metering_secret
-# Deprecated group/name - [publisher]/metering_secret
-#telemetry_secret = change this for valid signing
-
-
-[publisher_notifier]
-
-#
-# From ceilometer
-#
-
-# The topic that ceilometer uses for metering notifications. (string value)
-#metering_topic = metering
-
-# The topic that ceilometer uses for event notifications. (string value)
-#event_topic = event
-
-# The driver that ceilometer uses for metering notifications. (string value)
-# Deprecated group/name - [publisher_notifier]/metering_driver
-#telemetry_driver = messagingv2
-
-
-[rgw_admin_credentials]
-
-#
-# From ceilometer
-#
-
-# Access key for Radosgw Admin. (string value)
-#access_key = <None>
-
-# Secret key for Radosgw Admin. (string value)
-#secret_key = <None>
-
+telemetry_secret=opnfv_secret
 
 [service_credentials]
 
-#
-# From ceilometer-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-# Authentication URL (string value)
-#auth_url = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
-
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
-# Allowed values: public, internal, admin, auth, publicURL, internalURL, adminURL
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-
-[service_types]
-
-#
-# From ceilometer
-#
-
-# Glance service type. (string value)
-#glance = image
-
-# Neutron service type. (string value)
-#neutron = network
-
-# Neutron load balancer version. (string value)
-# Allowed values: v1, v2
-#neutron_lbaas_version = v2
-
-# Nova service type. (string value)
-#nova = compute
-
-# Radosgw service type. (string value)
-#radosgw = <None>
-
-# Swift service type. (string value)
-#swift = object-store
-
-# Cinder service type. (string value)
-# Deprecated group/name - [service_types]/cinderv2
-#cinder = volumev3
-
-
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+auth_type = password
+user_domain_id = default
+project_domain_id = default
+project_name = service
+username = ceilometer
+password = opnfv_secret
+auth_url = http://172.16.10.36:5000
+token_cache_time = -1
+interface = internal
+region_name = RegionOne

2018-05-09 23:37:40,761 [salt.state       ][INFO    ][13903] Completed state [/etc/ceilometer/ceilometer.conf] at time 23:37:40.761574 duration_in_ms=182.17
2018-05-09 23:37:40,762 [salt.state       ][INFO    ][13903] Running state [/etc/default/ceilometer-agent-central] at time 23:37:40.761978
2018-05-09 23:37:40,762 [salt.state       ][INFO    ][13903] Executing state file.managed for /etc/default/ceilometer-agent-central
2018-05-09 23:37:40,791 [salt.fileclient  ][INFO    ][13903] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-05-09 23:37:40,794 [salt.state       ][INFO    ][13903] File changed:
New file
2018-05-09 23:37:40,794 [salt.state       ][INFO    ][13903] Completed state [/etc/default/ceilometer-agent-central] at time 23:37:40.794350 duration_in_ms=32.372
2018-05-09 23:37:40,794 [salt.state       ][INFO    ][13903] Running state [/etc/default/ceilometer-agent-notification] at time 23:37:40.794737
2018-05-09 23:37:40,794 [salt.state       ][INFO    ][13903] Executing state file.managed for /etc/default/ceilometer-agent-notification
2018-05-09 23:37:40,808 [salt.state       ][INFO    ][13903] File changed:
New file
2018-05-09 23:37:40,809 [salt.state       ][INFO    ][13903] Completed state [/etc/default/ceilometer-agent-notification] at time 23:37:40.809152 duration_in_ms=14.415
2018-05-09 23:37:40,809 [salt.state       ][INFO    ][13903] Running state [/etc/ceilometer/pipeline.yaml] at time 23:37:40.809536
2018-05-09 23:37:40,809 [salt.state       ][INFO    ][13903] Executing state file.managed for /etc/ceilometer/pipeline.yaml
2018-05-09 23:37:40,832 [salt.fileclient  ][INFO    ][13903] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/pipeline.yaml'
2018-05-09 23:37:40,903 [salt.state       ][INFO    ][13903] File changed:
New file
2018-05-09 23:37:40,904 [salt.state       ][INFO    ][13903] Completed state [/etc/ceilometer/pipeline.yaml] at time 23:37:40.904107 duration_in_ms=94.571
2018-05-09 23:37:40,904 [salt.state       ][INFO    ][13903] Running state [/etc/ceilometer/event_pipeline.yaml] at time 23:37:40.904501
2018-05-09 23:37:40,904 [salt.state       ][INFO    ][13903] Executing state file.managed for /etc/ceilometer/event_pipeline.yaml
2018-05-09 23:37:40,920 [salt.fileclient  ][INFO    ][13903] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/event_pipeline.yaml'
2018-05-09 23:37:40,987 [salt.state       ][INFO    ][13903] File changed:
New file
2018-05-09 23:37:40,987 [salt.state       ][INFO    ][13903] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 23:37:40.987846 duration_in_ms=83.344
2018-05-09 23:37:40,988 [salt.state       ][INFO    ][13903] Running state [/etc/ceilometer/event_definitions.yaml] at time 23:37:40.988256
2018-05-09 23:37:40,988 [salt.state       ][INFO    ][13903] Executing state file.managed for /etc/ceilometer/event_definitions.yaml
2018-05-09 23:37:41,008 [salt.fileclient  ][INFO    ][13903] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/event_definitions.yaml'
2018-05-09 23:37:41,017 [salt.state       ][INFO    ][13903] File changed:
New file
2018-05-09 23:37:41,017 [salt.state       ][INFO    ][13903] Completed state [/etc/ceilometer/event_definitions.yaml] at time 23:37:41.017725 duration_in_ms=29.469
2018-05-09 23:37:41,018 [salt.state       ][INFO    ][13903] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 23:37:41.018111
2018-05-09 23:37:41,018 [salt.state       ][INFO    ][13903] Executing state file.managed for /etc/ceilometer/gabbi_pipeline.yaml
2018-05-09 23:37:41,033 [salt.fileclient  ][INFO    ][13903] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/gabbi_pipeline.yaml'
2018-05-09 23:37:41,036 [salt.state       ][INFO    ][13903] File changed:
New file
2018-05-09 23:37:41,036 [salt.state       ][INFO    ][13903] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 23:37:41.036469 duration_in_ms=18.358
2018-05-09 23:37:41,036 [salt.state       ][INFO    ][13903] Running state [/etc/apache2/sites-available/ceilometer-api.conf] at time 23:37:41.036851
2018-05-09 23:37:41,037 [salt.state       ][INFO    ][13903] Executing state file.managed for /etc/apache2/sites-available/ceilometer-api.conf
2018-05-09 23:37:41,053 [salt.fileclient  ][INFO    ][13903] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/pike/ceilometer.apache2.conf.Debian'
2018-05-09 23:37:41,102 [salt.state       ][INFO    ][13903] File changed:
--- 
+++ 
@@ -1,7 +1,7 @@
-Listen 8777
+Listen 172.16.10.36:8777
 
 <VirtualHost *:8777>
-    WSGIDaemonProcess ceilometer-api processes=2 threads=10 user=ceilometer display-name=%{GROUP}
+    WSGIDaemonProcess ceilometer-api processes=2 threads=10 user=ceilometer group=ceilometer display-name=%{GROUP}
     WSGIProcessGroup ceilometer-api
     WSGIScriptAlias / /usr/share/ceilometer/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -9,5 +9,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/ceilometer_error.log
-    CustomLog /var/log/apache2/ceilometer_access.log combined
+    CustomLog /var/log/apache2/ceilometer_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-05-09 23:37:41,102 [salt.state       ][INFO    ][13903] Completed state [/etc/apache2/sites-available/ceilometer-api.conf] at time 23:37:41.102773 duration_in_ms=65.922
2018-05-09 23:37:41,103 [salt.state       ][INFO    ][13903] Running state [/etc/apache2/sites-enabled/ceilometer-api.conf] at time 23:37:41.103308
2018-05-09 23:37:41,103 [salt.state       ][INFO    ][13903] Executing state file.symlink for /etc/apache2/sites-enabled/ceilometer-api.conf
2018-05-09 23:37:41,104 [salt.state       ][INFO    ][13903] {'new': '/etc/apache2/sites-enabled/ceilometer-api.conf'}
2018-05-09 23:37:41,105 [salt.state       ][INFO    ][13903] Completed state [/etc/apache2/sites-enabled/ceilometer-api.conf] at time 23:37:41.105136 duration_in_ms=1.828
2018-05-09 23:37:41,108 [salt.state       ][INFO    ][13903] Running state [apache2] at time 23:37:41.108311
2018-05-09 23:37:41,108 [salt.state       ][INFO    ][13903] Executing state service.running for apache2
2018-05-09 23:37:41,109 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-05-09 23:37:41,126 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:37:41,138 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:37:41,156 [salt.state       ][INFO    ][13903] The service apache2 is already running
2018-05-09 23:37:41,157 [salt.state       ][INFO    ][13903] Completed state [apache2] at time 23:37:41.157383 duration_in_ms=49.069
2018-05-09 23:37:41,157 [salt.state       ][INFO    ][13903] Running state [apache2] at time 23:37:41.157899
2018-05-09 23:37:41,158 [salt.state       ][INFO    ][13903] Executing state service.mod_watch for apache2
2018-05-09 23:37:41,160 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:37:41,175 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:37:41,194 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-05-09 23:37:41,204 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233741216561
2018-05-09 23:37:41,222 [salt.minion      ][INFO    ][17401] Starting a new job with PID 17401
2018-05-09 23:37:41,245 [salt.minion      ][INFO    ][17401] Returning information for job: 20180509233741216561
2018-05-09 23:37:51,231 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233751239692
2018-05-09 23:37:51,250 [salt.minion      ][INFO    ][17441] Starting a new job with PID 17441
2018-05-09 23:37:51,277 [salt.minion      ][INFO    ][17441] Returning information for job: 20180509233751239692
2018-05-09 23:37:53,522 [salt.state       ][INFO    ][13903] {'apache2': True}
2018-05-09 23:37:53,523 [salt.state       ][INFO    ][13903] Completed state [apache2] at time 23:37:53.523860 duration_in_ms=12365.96
2018-05-09 23:37:53,526 [salt.state       ][INFO    ][13903] Running state [ceilometer-agent-central] at time 23:37:53.526863
2018-05-09 23:37:53,527 [salt.state       ][INFO    ][13903] Executing state service.running for ceilometer-agent-central
2018-05-09 23:37:53,529 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-05-09 23:37:53,562 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-05-09 23:37:53,580 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-05-09 23:37:53,600 [salt.state       ][INFO    ][13903] The service ceilometer-agent-central is already running
2018-05-09 23:37:53,600 [salt.state       ][INFO    ][13903] Completed state [ceilometer-agent-central] at time 23:37:53.600387 duration_in_ms=73.525
2018-05-09 23:37:53,600 [salt.state       ][INFO    ][13903] Running state [ceilometer-agent-central] at time 23:37:53.600660
2018-05-09 23:37:53,601 [salt.state       ][INFO    ][13903] Executing state service.mod_watch for ceilometer-agent-central
2018-05-09 23:37:53,601 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-05-09 23:37:53,622 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-05-09 23:37:53,642 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-05-09 23:37:53,787 [salt.state       ][INFO    ][13903] {'ceilometer-agent-central': True}
2018-05-09 23:37:53,787 [salt.state       ][INFO    ][13903] Completed state [ceilometer-agent-central] at time 23:37:53.787878 duration_in_ms=187.216
2018-05-09 23:37:53,789 [salt.state       ][INFO    ][13903] Running state [ceilometer-agent-notification] at time 23:37:53.789284
2018-05-09 23:37:53,789 [salt.state       ][INFO    ][13903] Executing state service.running for ceilometer-agent-notification
2018-05-09 23:37:53,790 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-05-09 23:37:53,810 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-05-09 23:37:53,826 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-05-09 23:37:53,842 [salt.state       ][INFO    ][13903] The service ceilometer-agent-notification is already running
2018-05-09 23:37:53,843 [salt.state       ][INFO    ][13903] Completed state [ceilometer-agent-notification] at time 23:37:53.842962 duration_in_ms=53.677
2018-05-09 23:37:53,843 [salt.state       ][INFO    ][13903] Running state [ceilometer-agent-notification] at time 23:37:53.843237
2018-05-09 23:37:53,843 [salt.state       ][INFO    ][13903] Executing state service.mod_watch for ceilometer-agent-notification
2018-05-09 23:37:53,844 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-05-09 23:37:53,858 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-05-09 23:37:53,872 [salt.loaded.int.module.cmdmod][INFO    ][13903] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-05-09 23:37:59,630 [salt.state       ][INFO    ][13903] {'ceilometer-agent-notification': True}
2018-05-09 23:37:59,631 [salt.state       ][INFO    ][13903] Completed state [ceilometer-agent-notification] at time 23:37:59.631064 duration_in_ms=5787.827
2018-05-09 23:37:59,634 [salt.minion      ][INFO    ][13903] Returning information for job: 20180509233650433769
2018-05-09 23:38:25,464 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command state.sls with jid 20180509233825479195
2018-05-09 23:38:25,481 [salt.minion      ][INFO    ][17970] Starting a new job with PID 17970
2018-05-09 23:38:28,244 [salt.state       ][INFO    ][17970] Loading fresh modules for state activity
2018-05-09 23:38:28,301 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/init.sls'
2018-05-09 23:38:28,337 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/server/init.sls'
2018-05-09 23:38:28,366 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/server/service.sls'
2018-05-09 23:38:28,491 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/server/plugin.sls'
2018-05-09 23:38:29,901 [salt.state       ][INFO    ][17970] Running state [apache2] at time 23:38:29.901087
2018-05-09 23:38:29,902 [salt.state       ][INFO    ][17970] Executing state pkg.installed for apache2
2018-05-09 23:38:29,902 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:38:30,370 [salt.state       ][INFO    ][17970] All specified packages are already installed
2018-05-09 23:38:30,370 [salt.state       ][INFO    ][17970] Completed state [apache2] at time 23:38:30.370808 duration_in_ms=469.72
2018-05-09 23:38:30,371 [salt.state       ][INFO    ][17970] Running state [libapache2-mod-wsgi] at time 23:38:30.371187
2018-05-09 23:38:30,371 [salt.state       ][INFO    ][17970] Executing state pkg.installed for libapache2-mod-wsgi
2018-05-09 23:38:30,381 [salt.state       ][INFO    ][17970] All specified packages are already installed
2018-05-09 23:38:30,381 [salt.state       ][INFO    ][17970] Completed state [libapache2-mod-wsgi] at time 23:38:30.381225 duration_in_ms=10.037
2018-05-09 23:38:30,381 [salt.state       ][INFO    ][17970] Running state [openstack-dashboard] at time 23:38:30.381456
2018-05-09 23:38:30,381 [salt.state       ][INFO    ][17970] Executing state pkg.installed for openstack-dashboard
2018-05-09 23:38:30,401 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['apt-cache', '-q', 'policy', 'openstack-dashboard'] in directory '/root'
2018-05-09 23:38:30,504 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-05-09 23:38:32,896 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:38:32,941 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'openstack-dashboard'] in directory '/root'
2018-05-09 23:38:35,496 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233835507000
2018-05-09 23:38:35,525 [salt.minion      ][INFO    ][18365] Starting a new job with PID 18365
2018-05-09 23:38:35,555 [salt.minion      ][INFO    ][18365] Returning information for job: 20180509233835507000
2018-05-09 23:38:45,541 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233845554512
2018-05-09 23:38:45,568 [salt.minion      ][INFO    ][18516] Starting a new job with PID 18516
2018-05-09 23:38:45,608 [salt.minion      ][INFO    ][18516] Returning information for job: 20180509233845554512
2018-05-09 23:38:55,588 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233855602022
2018-05-09 23:38:55,609 [salt.minion      ][INFO    ][18873] Starting a new job with PID 18873
2018-05-09 23:38:55,638 [salt.minion      ][INFO    ][18873] Returning information for job: 20180509233855602022
2018-05-09 23:39:05,624 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233905637986
2018-05-09 23:39:05,652 [salt.minion      ][INFO    ][18880] Starting a new job with PID 18880
2018-05-09 23:39:05,682 [salt.minion      ][INFO    ][18880] Returning information for job: 20180509233905637986
2018-05-09 23:39:15,662 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233915680824
2018-05-09 23:39:15,686 [salt.minion      ][INFO    ][18892] Starting a new job with PID 18892
2018-05-09 23:39:15,716 [salt.minion      ][INFO    ][18892] Returning information for job: 20180509233915680824
2018-05-09 23:39:25,707 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233925722748
2018-05-09 23:39:25,729 [salt.minion      ][INFO    ][18901] Starting a new job with PID 18901
2018-05-09 23:39:25,758 [salt.minion      ][INFO    ][18901] Returning information for job: 20180509233925722748
2018-05-09 23:39:35,747 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233935765299
2018-05-09 23:39:35,763 [salt.minion      ][INFO    ][18914] Starting a new job with PID 18914
2018-05-09 23:39:35,808 [salt.minion      ][INFO    ][18914] Returning information for job: 20180509233935765299
2018-05-09 23:39:43,687 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:39:43,761 [salt.state       ][INFO    ][17970] Made the following changes:
'python2.7-django-appconf' changed from 'absent' to '1'
'python-django' changed from 'absent' to '1.8.7-1ubuntu5.6'
'python-rcssmin' changed from 'absent' to '1.0.6-1ubuntu1'
'python-pint' changed from 'absent' to '0.6-1ubuntu1'
'python-csscompressor' changed from 'absent' to '0.9.4-2'
'python-django-horizon' changed from 'absent' to '3:12.0.2-0ubuntu1~cloud0'
'python-openstack-auth' changed from 'absent' to '3.5.0-0ubuntu1~cloud0'
'python-pyscss' changed from 'absent' to '1.3.4-5'
'python2.7-django-openstack-auth' changed from 'absent' to '1'
'python-appconf' changed from 'absent' to '1'
'python-compressor' changed from 'absent' to '2.0-1ubuntu1'
'python2.7-django-compressor' changed from 'absent' to '1'
'python-django-compressor' changed from 'absent' to '2.0-1ubuntu1'
'python-django-pyscss' changed from 'absent' to '2.0.2-4'
'openstack-dashboard' changed from 'absent' to '3:12.0.2-0ubuntu1~cloud0'
'python-django-common' changed from 'absent' to '1.8.7-1ubuntu5.6'
'python-rjsmin' changed from 'absent' to '1.0.12+dfsg1-2ubuntu1'
'python-django-openstack-auth' changed from 'absent' to '3.5.0-0ubuntu1~cloud0'
'python-pathlib' changed from 'absent' to '1.0.1-2'
'python2.7-pathlib' changed from 'absent' to '1'
'python-django-appconf' changed from 'absent' to '1.0.1-4'

2018-05-09 23:39:43,797 [salt.state       ][INFO    ][17970] Loading fresh modules for state activity
2018-05-09 23:39:43,870 [salt.state       ][INFO    ][17970] Completed state [openstack-dashboard] at time 23:39:43.870596 duration_in_ms=73489.14
2018-05-09 23:39:43,884 [salt.state       ][INFO    ][17970] Running state [python-lesscpy] at time 23:39:43.883973
2018-05-09 23:39:43,884 [salt.state       ][INFO    ][17970] Executing state pkg.installed for python-lesscpy
2018-05-09 23:39:44,382 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-05-09 23:39:44,426 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-lesscpy'] in directory '/root'
2018-05-09 23:39:45,819 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233945832002
2018-05-09 23:39:45,841 [salt.minion      ][INFO    ][19454] Starting a new job with PID 19454
2018-05-09 23:39:45,870 [salt.minion      ][INFO    ][19454] Returning information for job: 20180509233945832002
2018-05-09 23:39:47,020 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}\n', '-W'] in directory '/root'
2018-05-09 23:39:47,093 [salt.state       ][INFO    ][17970] Made the following changes:
'python-lesscpy' changed from 'absent' to '0.10-1'

2018-05-09 23:39:47,121 [salt.state       ][INFO    ][17970] Loading fresh modules for state activity
2018-05-09 23:39:47,157 [salt.state       ][INFO    ][17970] Completed state [python-lesscpy] at time 23:39:47.157883 duration_in_ms=3273.909
2018-05-09 23:39:47,173 [salt.state       ][INFO    ][17970] Running state [python-memcache] at time 23:39:47.172980
2018-05-09 23:39:47,173 [salt.state       ][INFO    ][17970] Executing state pkg.installed for python-memcache
2018-05-09 23:39:47,630 [salt.state       ][INFO    ][17970] All specified packages are already installed
2018-05-09 23:39:47,631 [salt.state       ][INFO    ][17970] Completed state [python-memcache] at time 23:39:47.631535 duration_in_ms=458.554
2018-05-09 23:39:47,632 [salt.state       ][INFO    ][17970] Running state [gettext-base] at time 23:39:47.632037
2018-05-09 23:39:47,632 [salt.state       ][INFO    ][17970] Executing state pkg.installed for gettext-base
2018-05-09 23:39:47,641 [salt.state       ][INFO    ][17970] All specified packages are already installed
2018-05-09 23:39:47,642 [salt.state       ][INFO    ][17970] Completed state [gettext-base] at time 23:39:47.641966 duration_in_ms=9.929
2018-05-09 23:39:47,642 [salt.state       ][INFO    ][17970] Running state [openstack-dashboard-apache] at time 23:39:47.642858
2018-05-09 23:39:47,643 [salt.state       ][INFO    ][17970] Executing state pkg.purged for openstack-dashboard-apache
2018-05-09 23:39:47,663 [salt.state       ][INFO    ][17970] All specified packages are already absent
2018-05-09 23:39:47,664 [salt.state       ][INFO    ][17970] Completed state [openstack-dashboard-apache] at time 23:39:47.663956 duration_in_ms=21.098
2018-05-09 23:39:47,666 [salt.state       ][INFO    ][17970] Running state [/etc/openstack-dashboard/local_settings.py] at time 23:39:47.666428
2018-05-09 23:39:47,666 [salt.state       ][INFO    ][17970] Executing state file.managed for /etc/openstack-dashboard/local_settings.py
2018-05-09 23:39:47,693 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/local_settings/pike_settings.py'
2018-05-09 23:39:47,763 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_local_settings.py'
2018-05-09 23:39:47,843 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_horizon_settings.py'
2018-05-09 23:39:47,879 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_keystone_settings.py'
2018-05-09 23:39:47,922 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_nova_settings.py'
2018-05-09 23:39:47,948 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_glance_settings.py'
2018-05-09 23:39:47,975 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_neutron_settings.py'
2018-05-09 23:39:48,018 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_heat_settings.py'
2018-05-09 23:39:48,047 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_websso_settings.py'
2018-05-09 23:39:48,074 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/horizon_settings/_ssl_settings.py'
2018-05-09 23:39:48,090 [salt.state       ][INFO    ][17970] File changed:
--- 
+++ 
@@ -1,169 +1,61 @@
-# -*- coding: utf-8 -*-
-
 import os
-
 from django.utils.translation import ugettext_lazy as _
-
-from horizon.utils import secret_key
-
-from openstack_dashboard.settings import HORIZON_CONFIG
+from openstack_dashboard import exceptions
+
+HORIZON_CONFIG = {
+    'user_home': 'openstack_dashboard.views.get_user_home',
+    'ajax_queue_limit': 10,
+    'auto_fade_alerts': {
+        'delay': 3000,
+        'fade_duration': 1500,
+        'types': ['alert-success', 'alert-info']
+    },
+    'help_url': "http://docs.openstack.org",
+    'exceptions': {'recoverable': exceptions.RECOVERABLE,
+                   'not_found': exceptions.NOT_FOUND,
+                   'unauthorized': exceptions.UNAUTHORIZED},
+    'modal_backdrop': 'static',
+    'angular_modules': [],
+    'js_files': [],
+    'js_spec_files': [],
+    'disable_password_reveal': True,
+    'password_autocomplete': 'off'
+}
+
+INSTALLED_APPS = (
+    'openstack_dashboard',
+    'django.contrib.contenttypes',
+    'django.contrib.auth',
+    'django.contrib.sessions',
+    'django.contrib.messages',
+    'django.contrib.staticfiles',
+    'django.contrib.humanize',
+    'compressor',
+    'horizon',
+    'openstack_auth',
+)
+
+
 
 DEBUG = False
 
-# This setting controls whether or not compression is enabled. Disabling
-# compression makes Horizon considerably slower, but makes it much easier
-# to debug JS and CSS changes
-#COMPRESS_ENABLED = not DEBUG
-
-# This setting controls whether compression happens on the fly, or offline
-# with `python manage.py compress`
-# See https://django-compressor.readthedocs.io/en/latest/usage/#offline-compression
-# for more information
-#COMPRESS_OFFLINE = not DEBUG
-
-# WEBROOT is the location relative to Webserver root
-# should end with a slash.
-WEBROOT = '/'
-#LOGIN_URL = WEBROOT + 'auth/login/'
-#LOGOUT_URL = WEBROOT + 'auth/logout/'
-#
-# LOGIN_REDIRECT_URL can be used as an alternative for
-# HORIZON_CONFIG.user_home, if user_home is not set.
-# Do not set it to '/home/', as this will cause circular redirect loop
-#LOGIN_REDIRECT_URL = WEBROOT
-
-# If horizon is running in production (DEBUG is False), set this
-# with the list of host/domain names that the application can serve.
-# For more information see:
-# https://docs.djangoproject.com/en/dev/ref/settings/#allowed-hosts
-#ALLOWED_HOSTS = ['horizon.example.com', ]
-
-# Set SSL proxy settings:
-# Pass this header from the proxy after terminating the SSL,
-# and don't forget to strip it from the client's request.
-# For more information see:
-# https://docs.djangoproject.com/en/dev/ref/settings/#secure-proxy-ssl-header
-#SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTO', 'https')
-
-# If Horizon is being served through SSL, then uncomment the following two
-# settings to better secure the cookies from security exploits
-#CSRF_COOKIE_SECURE = True
-#SESSION_COOKIE_SECURE = True
-
-# The absolute path to the directory where message files are collected.
-# The message file must have a .json file extension. When the user logins to
-# horizon, the message files collected are processed and displayed to the user.
-#MESSAGES_PATH=None
-
-# Overrides for OpenStack API versions. Use this setting to force the
-# OpenStack dashboard to use a specific API version for a given service API.
-# Versions specified here should be integers or floats, not strings.
-# NOTE: The version should be formatted as it appears in the URL for the
-# service API. For example, The identity service APIs have inconsistent
-# use of the decimal point, so valid options would be 2.0 or 3.
-# Minimum compute version to get the instance locked status is 2.9.
-#OPENSTACK_API_VERSIONS = {
-#    "data-processing": 1.1,
-#    "identity": 3,
-#    "image": 2,
-#    "volume": 2,
-#    "compute": 2,
-#}
-
-# Set this to True if running on a multi-domain model. When this is enabled, it
-# will require the user to enter the Domain name in addition to the username
-# for login.
-#OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = False
-
-# Set this to True if you want available domains displayed as a dropdown menu
-# on the login screen. It is strongly advised NOT to enable this for public
-# clouds, as advertising enabled domains to unauthenticated customers
-# irresponsibly exposes private information. This should only be used for
-# private clouds where the dashboard sits behind a corporate firewall.
-#OPENSTACK_KEYSTONE_DOMAIN_DROPDOWN = False
-
-# If OPENSTACK_KEYSTONE_DOMAIN_DROPDOWN is enabled, this option can be used to
-# set the available domains to choose from. This is a list of pairs whose first
-# value is the domain name and the second is the display name.
-#OPENSTACK_KEYSTONE_DOMAIN_CHOICES = (
-#  ('Default', 'Default'),
-#)
-
-# Overrides the default domain used when running on single-domain model
-# with Keystone V3. All entities will be created in the default domain.
-# NOTE: This value must be the name of the default domain, NOT the ID.
-# Also, you will most likely have a value in the keystone policy file like this
-#    "cloud_admin": "rule:admin_required and domain_id:<your domain id>"
-# This value must be the name of the domain whose ID is specified there.
-#OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = 'Default'
-
-# Set this to True to enable panels that provide the ability for users to
-# manage Identity Providers (IdPs) and establish a set of rules to map
-# federation protocol attributes to Identity API attributes.
-# This extension requires v3.0+ of the Identity API.
-#OPENSTACK_KEYSTONE_FEDERATION_MANAGEMENT = False
-
-# Set Console type:
-# valid options are "AUTO"(default), "VNC", "SPICE", "RDP", "SERIAL" or None
-# Set to None explicitly if you want to deactivate the console.
-#CONSOLE_TYPE = "AUTO"
-
-# If provided, a "Report Bug" link will be displayed in the site header
-# which links to the value of this setting (ideally a URL containing
-# information on how to report issues).
-#HORIZON_CONFIG["bug_url"] = "http://bug-report.example.com"
-
-# Show backdrop element outside the modal, do not close the modal
-# after clicking on backdrop.
-#HORIZON_CONFIG["modal_backdrop"] = "static"
-
-# Specify a regular expression to validate user passwords.
-#HORIZON_CONFIG["password_validator"] = {
-#    "regex": '.*',
-#    "help_text": _("Your password does not meet the requirements."),
-#}
-
-# Disable simplified floating IP address management for deployments with
-# multiple floating IP pools or complex network requirements.
-#HORIZON_CONFIG["simple_ip_management"] = False
-
-# Turn off browser autocompletion for forms including the login form and
-# the database creation workflow if so desired.
-#HORIZON_CONFIG["password_autocomplete"] = "off"
-
-# Setting this to True will disable the reveal button for password fields,
-# including on the login form.
-#HORIZON_CONFIG["disable_password_reveal"] = False
+TEMPLATE_DEBUG = DEBUG
+
+ALLOWED_HOSTS = ['*']
+
+AUTHENTICATION_URLS = ['openstack_auth.urls']
 
 LOCAL_PATH = os.path.dirname(os.path.abspath(__file__))
 
-# Set custom secret key:
-# You can either set it to a specific value or you can let horizon generate a
-# default secret key that is unique on this machine, e.i. regardless of the
-# amount of Python WSGI workers (if used behind Apache+mod_wsgi): However,
-# there may be situations where you would want to set this explicitly, e.g.
-# when multiple dashboard instances are distributed on different machines
-# (usually behind a load-balancer). Either you have to make sure that a session
-# gets all requests routed to the same dashboard instance or you set the same
-# SECRET_KEY for all of them.
-SECRET_KEY = secret_key.generate_or_read_from_file('/var/lib/openstack-dashboard/secret_key')
-
-# We recommend you use memcached for development; otherwise after every reload
-# of the django development server, you will have to login again. To use
-# memcached set CACHES to something like
+SECRET_KEY = 'opaesee8Que2yahJoh9fo0eefo1Aeyo6ahyei8zeiboh3aeth5loth7ieNa5xi5e'
 
 CACHES = {
     'default': {
+
         'BACKEND': 'django.core.cache.backends.memcached.MemcachedCache',
-        'LOCATION': '127.0.0.1:11211',
-    },
-}
-
-#CACHES = {
-#    'default': {
-#        'BACKEND': 'django.core.cache.backends.locmem.LocMemCache',
-#    }
-#}
+        'LOCATION': "172.16.10.36:11211"
+    }
+}
 
 # Send email to the console by default
 EMAIL_BACKEND = 'django.core.mail.backends.console.EmailBackend'
@@ -171,75 +63,247 @@
 #EMAIL_BACKEND = 'django.core.mail.backends.dummy.EmailBackend'
 
 # Configure these for your outgoing email host
-#EMAIL_HOST = 'smtp.my-company.com'
-#EMAIL_PORT = 25
-#EMAIL_HOST_USER = 'djangomail'
-#EMAIL_HOST_PASSWORD = 'top-secret!'
+# EMAIL_HOST = 'smtp.my-company.com'
+# EMAIL_PORT = 25
+# EMAIL_HOST_USER = 'djangomail'
+# EMAIL_HOST_PASSWORD = 'top-secret!'
+
+# The number of objects (Swift containers/objects or images) to display
+# on a single page before providing a paging element (a "more" link)
+# to paginate results.
+API_RESULT_LIMIT = 1000
+API_RESULT_PAGE_SIZE = 20
+
+# The timezone of the server. This should correspond with the timezone
+# of your entire OpenStack installation, and hopefully be in UTC.
+TIME_ZONE = "UTC"
+
+COMPRESS_OFFLINE = True
+
+# Trove user and database extension support. By default support for
+# creating users and databases on database instances is turned on.
+# To disable these extensions set the permission here to something
+# unusable such as ["!"].
+# TROVE_ADD_USER_PERMS = []
+# TROVE_ADD_DATABASE_PERMS = []
+
+SITE_BRANDING = 'OpenStack Dashboard'
+SESSION_COOKIE_HTTPONLY = True
+BOOT_ONLY_FROM_VOLUME = True
+
+REST_API_REQUIRED_SETTINGS = ['OPENSTACK_HYPERVISOR_FEATURES',
+                             'LAUNCH_INSTANCE_DEFAULTS',
+                             'OPENSTACK_IMAGE_FORMATS']
+
+
+# Specify a regular expression to validate user passwords.
+# HORIZON_CONFIG["password_validator"] = {
+#     "regex": '.*',
+#     "help_text": _("Your password does not meet the requirements.")
+# }
+
+# Turn off browser autocompletion for the login form if so desired.
+# HORIZON_CONFIG["password_autocomplete"] = "off"
+
+# The Horizon Policy Enforcement engine uses these values to load per service
+# policy rule files. The content of these files should match the files the
+# OpenStack services are using to determine role based access control in the
+# target installation.
+
+SESSION_TIMEOUT = 43200
+SESSION_ENGINE = "django.contrib.sessions.backends.cache"
+DROPDOWN_MAX_ITEMS = 30
+
+# Path to directory containing policy.json files
+POLICY_FILES_PATH = "/usr/share/openstack-dashboard/openstack_dashboard/conf"
+# Map of local copy of service policy files
+POLICY_FILES = {
+    "compute": "nova_policy.json",
+    "network": "neutron_policy.json",
+    "image": "glance_policy.json",
+    "telemetry": "ceilometer_policy.json",
+    "volume": "cinder_policy.json",
+    "orchestration": "heat_policy.json",
+    "identity": "keystone_policy.json",
+}
+
+LOGGING = {
+    'version': 1,
+    # When set to True this will disable all logging except
+    # for loggers specified in this configuration dictionary. Note that
+    # if nothing is specified here and disable_existing_loggers is True,
+    # django.db.backends will still log unless it is disabled explicitly.
+    
+    'disable_existing_loggers': False,
+    'handlers': {
+        'null': {
+            'level': 'DEBUG',
+            'class': 'logging.NullHandler',
+        },
+        'console': {
+            # Set the level to "DEBUG" for verbose output logging.
+            'level': 'INFO',
+            'class': 'logging.StreamHandler',
+        },
+        'file': {
+            'level': 'DEBUG',
+            'class': 'logging.FileHandler',
+            'filename': '/var/log/horizon/horizon.log',
+        },
+    },
+    'loggers': {
+        # Logging from django.db.backends is VERY verbose, send to null
+        # by default.
+        'django.db.backends': {
+            'handlers': ['null'],
+            'propagate': False,
+        },
+        # DEBUG level for django.template starting Pike has some false positive traces, set it to INFO
+        # by default. Caused by bug PROD-17558.
+        'django.template': {
+            'handlers': ['file'],
+            'level': 'INFO',
+            'propagate': True,
+        },
+        'requests': {
+            'handlers': ['null'],
+            'propagate': False,
+        },
+        'horizon': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'openstack_dashboard': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'novaclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'cinderclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'keystoneclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'glanceclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'neutronclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'heatclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'ceilometerclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'troveclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'mistralclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'swiftclient': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'openstack_auth': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'scss.expression': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'nose.plugins.manager': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'django': {
+            'handlers': ['file'],
+            'level': 'DEBUG',
+            'propagate': False,
+        },
+        'iso8601': {
+            'handlers': ['null'],
+            'propagate': False,
+        },
+    }
+}
+
+
+# Overrides for OpenStack API versions. Use this setting to force the
+# OpenStack dashboard to use a specfic API version for a given service API.
+# NOTE: The version should be formatted as it appears in the URL for the
+# service API. For example, The identity service APIs have inconsistent
+# use of the decimal point, so valid options would be "2.0" or "3".
+OPENSTACK_API_VERSIONS = {
+    "identity": 3
+}
+# Set this to True if running on multi-domain model. When this is enabled, it
+# will require user to enter the Domain name in addition to username for login.
+# OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = False
+
+# Overrides the default domain used when running on single-domain model
+# with Keystone V3. All entities will be created in the default domain.
+# OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = 'Default'
 
 # For multiple regions uncomment this configuration, and add (endpoint, title).
-#AVAILABLE_REGIONS = [
-#    ('http://cluster1.example.com:5000/v2.0', 'cluster1'),
-#    ('http://cluster2.example.com:5000/v2.0', 'cluster2'),
-#]
-
-OPENSTACK_HOST = "127.0.0.1"
-OPENSTACK_KEYSTONE_URL = "http://%s:5000/v2.0" % OPENSTACK_HOST
-OPENSTACK_KEYSTONE_DEFAULT_ROLE = "_member_"
-
-# For setting the default service region on a per-endpoint basis. Note that the
-# default value for this setting is {}, and below is just an example of how it
-# should be specified.
-#DEFAULT_SERVICE_REGIONS = {
-#    OPENSTACK_KEYSTONE_URL: 'RegionOne'
-#}
-
-# Enables keystone web single-sign-on if set to True.
-#WEBSSO_ENABLED = False
-
-# Determines which authentication choice to show as default.
-#WEBSSO_INITIAL_CHOICE = "credentials"
-
-# The list of authentication mechanisms which include keystone
-# federation protocols and identity provider/federation protocol
-# mapping keys (WEBSSO_IDP_MAPPING). Current supported protocol
-# IDs are 'saml2' and 'oidc'  which represent SAML 2.0, OpenID
-# Connect respectively.
-# Do not remove the mandatory credentials mechanism.
-# Note: The last two tuples are sample mapping keys to a identity provider
-# and federation protocol combination (WEBSSO_IDP_MAPPING).
-#WEBSSO_CHOICES = (
-#    ("credentials", _("Keystone Credentials")),
-#    ("oidc", _("OpenID Connect")),
-#    ("saml2", _("Security Assertion Markup Language")),
-#    ("acme_oidc", "ACME - OpenID Connect"),
-#    ("acme_saml2", "ACME - SAML2"),
-#)
-
-# A dictionary of specific identity provider and federation protocol
-# combinations. From the selected authentication mechanism, the value
-# will be looked up as keys in the dictionary. If a match is found,
-# it will redirect the user to a identity provider and federation protocol
-# specific WebSSO endpoint in keystone, otherwise it will use the value
-# as the protocol_id when redirecting to the WebSSO by protocol endpoint.
-# NOTE: The value is expected to be a tuple formatted as: (<idp_id>, <protocol_id>).
-#WEBSSO_IDP_MAPPING = {
-#    "acme_oidc": ("acme", "oidc"),
-#    "acme_saml2": ("acme", "saml2"),
-#}
-
-# The Keystone Provider drop down uses Keystone to Keystone federation
-# to switch between Keystone service providers.
-# Set display name for Identity Provider (dropdown display name)
-#KEYSTONE_PROVIDER_IDP_NAME = "Local Keystone"
-# This id is used for only for comparison with the service provider IDs. This ID
-# should not match any service provider IDs.
-#KEYSTONE_PROVIDER_IDP_ID = "localkeystone"
+# AVAILABLE_REGIONS = [
+#     ('http://cluster1.example.com:5000/v2.0', 'cluster1'),
+#     ('http://cluster2.example.com:5000/v2.0', 'cluster2'),
+# ]
+
+
+OPENSTACK_HOST = "10.16.0.107"
+OPENSTACK_KEYSTONE_URL = "http://%s:5000/v3" % OPENSTACK_HOST
+
+OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = False
+OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = "default"
+
+OPENSTACK_KEYSTONE_DEFAULT_ROLE = "Member"
 
 # Disable SSL certificate checks (useful for self-signed certificates):
-#OPENSTACK_SSL_NO_VERIFY = True
 
 # The CA certificate to use to verify SSL connections
-#OPENSTACK_SSL_CACERT = '/path/to/cacert.pem'
+# OPENSTACK_SSL_CACERT = '/path/to/cacert.pem'
+
+# OPENSTACK_ENDPOINT_TYPE specifies the endpoint type to use for the endpoints
+# in the Keystone service catalog. Use this setting when Horizon is running
+# external to the OpenStack environment. The default is 'publicURL'.
+OPENSTACK_ENDPOINT_TYPE = "internalURL"
+
+# SECONDARY_ENDPOINT_TYPE specifies the fallback endpoint type to use in the
+# case that OPENSTACK_ENDPOINT_TYPE is not present in the endpoints
+# in the Keystone service catalog. Use this setting when Horizon is running
+# external to the OpenStack environment. The default is None.  This
+# value should differ from OPENSTACK_ENDPOINT_TYPE if used.
+#SECONDARY_ENDPOINT_TYPE = "publicURL"
 
 # The OPENSTACK_KEYSTONE_BACKEND settings can be used to identify the
 # capabilities of the auth backend for Keystone.
@@ -253,43 +317,13 @@
     'can_edit_group': True,
     'can_edit_project': True,
     'can_edit_domain': True,
-    'can_edit_role': True,
-}
-
-# Setting this to True, will add a new "Retrieve Password" action on instance,
-# allowing Admin session password retrieval/decryption.
-#OPENSTACK_ENABLE_PASSWORD_RETRIEVE = False
-
-# This setting allows deployers to control whether a token is deleted on log
-# out. This can be helpful when there are often long running processes being
-# run in the Horizon environment.
-#TOKEN_DELETION_DISABLED = False
-
-# The Launch Instance user experience has been significantly enhanced.
-# You can choose whether to enable the new launch instance experience,
-# the legacy experience, or both. The legacy experience will be removed
-# in a future release, but is available as a temporary backup setting to ensure
-# compatibility with existing deployments. Further development will not be
-# done on the legacy experience. Please report any problems with the new
-# experience via the Launchpad tracking system.
-#
-# Toggle LAUNCH_INSTANCE_LEGACY_ENABLED and LAUNCH_INSTANCE_NG_ENABLED to
-# determine the experience to enable.  Set them both to true to enable
-# both.
-#LAUNCH_INSTANCE_LEGACY_ENABLED = True
-#LAUNCH_INSTANCE_NG_ENABLED = False
-
-# A dictionary of settings which can be used to provide the default values for
-# properties found in the Launch Instance modal.
-#LAUNCH_INSTANCE_DEFAULTS = {
-#    'config_drive': False,
-#    'enable_scheduler_hints': True,
-#    'disable_image': False,
-#    'disable_instance_snapshot': False,
-#    'disable_volume': False,
-#    'disable_volume_snapshot': False,
-#    'create_volume': True,
-#}
+    'can_edit_role': True
+}
+
+
+# Set Console type:
+# valid options would be "AUTO", "VNC" or "SPICE"
+# CONSOLE_TYPE = "AUTO"
 
 # The Xen Hypervisor has the ability to set the mount point for volumes
 # attached to instances (other Hypervisors currently do not). Setting
@@ -298,97 +332,52 @@
 OPENSTACK_HYPERVISOR_FEATURES = {
     'can_set_mount_point': False,
     'can_set_password': False,
-    'requires_keypair': False,
-    'enable_quotas': True
-}
-
-# The OPENSTACK_CINDER_FEATURES settings can be used to enable optional
-# services provided by cinder that is not exposed by its extension API.
-OPENSTACK_CINDER_FEATURES = {
-    'enable_backup': False,
-}
-
-# The OPENSTACK_NEUTRON_NETWORK settings can be used to enable optional
-# services provided by neutron. Options currently available are load
-# balancer service, security groups, quotas, VPN service.
-OPENSTACK_NEUTRON_NETWORK = {
-    'enable_router': True,
-    'enable_quotas': True,
-    'enable_ipv6': True,
-    'enable_distributed_router': False,
-    'enable_ha_router': False,
-    'enable_fip_topology_check': True,
-
-    # Default dns servers you would like to use when a subnet is
-    # created.  This is only a default, users can still choose a different
-    # list of dns servers when creating a new subnet.
-    # The entries below are examples only, and are not appropriate for
-    # real deployments
-    # 'default_dns_nameservers': ["8.8.8.8", "8.8.4.4", "208.67.222.222"],
-
-    # Set which provider network types are supported. Only the network types
-    # in this list will be available to choose from when creating a network.
-    # Network types include local, flat, vlan, gre, vxlan and geneve.
-    # 'supported_provider_types': ['*'],
-
-    # You can configure available segmentation ID range per network type
-    # in your deployment.
-    # 'segmentation_id_range': {
-    #     'vlan': [1024, 2048],
-    #     'vxlan': [4094, 65536],
-    # },
-
-    # You can define additional provider network types here.
-    # 'extra_provider_types': {
-    #     'awesome_type': {
-    #         'display_name': 'Awesome New Type',
-    #         'require_physical_network': False,
-    #         'require_segmentation_id': True,
-    #     }
-    # },
-
-    # Set which VNIC types are supported for port binding. Only the VNIC
-    # types in this list will be available to choose from when creating a
-    # port.
-    # VNIC types include 'normal', 'direct', 'direct-physical', 'macvtap',
-    # 'baremetal' and 'virtio-forwarder'
-    # Set to empty list or None to disable VNIC type selection.
-    'supported_vnic_types': ['*'],
-
-    # Set list of available physical networks to be selected in the physical
-    # network field on the admin create network modal. If it's set to an empty
-    # list, the field will be a regular input field.
-    # e.g. ['default', 'test']
-    'physical_networks': [],
-
-}
-
-# The OPENSTACK_HEAT_STACK settings can be used to disable password
-# field required while launching the stack.
-OPENSTACK_HEAT_STACK = {
-    'enable_user_pass': True,
-}
+}
+
+# When set, enables the instance action "Retrieve password"
+# allowing password retrieval
+OPENSTACK_ENABLE_PASSWORD_RETRIEVE = False
+
+# When launching an instance, the menu of available flavors is
+# sorted by RAM usage, ascending.  Provide a callback method here
+# (and/or a flag for reverse sort) for the sorted() method if you'd
+# like a different behaviour.  For more info, see
+# http://docs.python.org/2/library/functions.html#sorted
+# CREATE_INSTANCE_FLAVOR_SORT = {
+#     'key': my_awesome_callback_method,
+#     'reverse': False,
+# }
+
+FLAVOR_EXTRA_KEYS = {
+    'flavor_keys': [
+        ('quota:read_bytes_sec', _('Quota: Read bytes')),
+        ('quota:write_bytes_sec', _('Quota: Write bytes')),
+        ('quota:cpu_quota', _('Quota: CPU')),
+        ('quota:cpu_period', _('Quota: CPU period')),
+        ('quota:inbound_average', _('Quota: Inbound average')),
+        ('quota:outbound_average', _('Quota: Outbound average')),
+    ]
+}
+
 
 # The OPENSTACK_IMAGE_BACKEND settings can be used to customize features
 # in the OpenStack Dashboard related to the Image service, such as the list
 # of supported image formats.
-#OPENSTACK_IMAGE_BACKEND = {
-#    'image_formats': [
-#        ('', _('Select format')),
-#        ('aki', _('AKI - Amazon Kernel Image')),
-#        ('ami', _('AMI - Amazon Machine Image')),
-#        ('ari', _('ARI - Amazon Ramdisk Image')),
-#        ('docker', _('Docker')),
-#        ('iso', _('ISO - Optical Disk Image')),
-#        ('ova', _('OVA - Open Virtual Appliance')),
-#        ('qcow2', _('QCOW2 - QEMU Emulator')),
-#        ('raw', _('Raw')),
-#        ('vdi', _('VDI - Virtual Disk Image')),
-#        ('vhd', _('VHD - Virtual Hard Disk')),
-#        ('vhdx', _('VHDX - Large Virtual Hard Disk')),
-#        ('vmdk', _('VMDK - Virtual Machine Disk')),
-#    ],
-#}
+OPENSTACK_IMAGE_BACKEND = {
+    'image_formats': [
+        ('', ''),
+        ('aki', _('AKI - Amazon Kernel Image')),
+        ('ami', _('AMI - Amazon Machine Image')),
+        ('ari', _('ARI - Amazon Ramdisk Image')),
+        ('iso', _('ISO - Optical Disk Image')),
+        ('qcow2', _('QCOW2 - QEMU Emulator')),
+        ('raw', _('Raw')),
+        ('vdi', _('VDI')),
+        ('vhd', _('VHD')),
+        ('vmdk', _('VMDK')),
+        ('docker', _('Docker Container'))
+    ]
+}
 
 # The IMAGE_CUSTOM_PROPERTY_TITLES settings is used to customize the titles for
 # image custom property attributes that appear on image detail pages.
@@ -398,273 +387,53 @@
     "ramdisk_id": _("Ramdisk ID"),
     "image_state": _("Euca2ools state"),
     "project_id": _("Project ID"),
-    "image_type": _("Image Type"),
-}
-
-# The IMAGE_RESERVED_CUSTOM_PROPERTIES setting is used to specify which image
-# custom properties should not be displayed in the Image Custom Properties
-# table.
-IMAGE_RESERVED_CUSTOM_PROPERTIES = []
-
-# Set to 'legacy' or 'direct' to allow users to upload images to glance via
-# Horizon server. When enabled, a file form field will appear on the create
-# image form. If set to 'off', there will be no file form field on the create
-# image form. See documentation for deployment considerations.
-#HORIZON_IMAGES_UPLOAD_MODE = 'legacy'
-
-# Allow a location to be set when creating or updating Glance images.
-# If using Glance V2, this value should be False unless the Glance
-# configuration and policies allow setting locations.
-#IMAGES_ALLOW_LOCATION = False
-
-# A dictionary of default settings for create image modal.
-#CREATE_IMAGE_DEFAULTS = {
-#    'image_visibility': "public",
-#}
-
-# OPENSTACK_ENDPOINT_TYPE specifies the endpoint type to use for the endpoints
-# in the Keystone service catalog. Use this setting when Horizon is running
-# external to the OpenStack environment. The default is 'publicURL'.
-#OPENSTACK_ENDPOINT_TYPE = "publicURL"
-
-# SECONDARY_ENDPOINT_TYPE specifies the fallback endpoint type to use in the
-# case that OPENSTACK_ENDPOINT_TYPE is not present in the endpoints
-# in the Keystone service catalog. Use this setting when Horizon is running
-# external to the OpenStack environment. The default is None. This
-# value should differ from OPENSTACK_ENDPOINT_TYPE if used.
-#SECONDARY_ENDPOINT_TYPE = None
-
-# The number of objects (Swift containers/objects or images) to display
-# on a single page before providing a paging element (a "more" link)
-# to paginate results.
-API_RESULT_LIMIT = 1000
-API_RESULT_PAGE_SIZE = 20
-
-# The size of chunk in bytes for downloading objects from Swift
-SWIFT_FILE_TRANSFER_CHUNK_SIZE = 512 * 1024
-
-# The default number of lines displayed for instance console log.
-INSTANCE_LOG_LENGTH = 35
-
-# Specify a maximum number of items to display in a dropdown.
-DROPDOWN_MAX_ITEMS = 30
-
-# The timezone of the server. This should correspond with the timezone
-# of your entire OpenStack installation, and hopefully be in UTC.
-TIME_ZONE = "UTC"
-
-# When launching an instance, the menu of available flavors is
-# sorted by RAM usage, ascending. If you would like a different sort order,
-# you can provide another flavor attribute as sorting key. Alternatively, you
-# can provide a custom callback method to use for sorting. You can also provide
-# a flag for reverse sort. For more info, see
-# http://docs.python.org/2/library/functions.html#sorted
-#CREATE_INSTANCE_FLAVOR_SORT = {
-#    'key': 'name',
-#     # or
-#    'key': my_awesome_callback_method,
-#    'reverse': False,
-#}
-
-# Set this to True to display an 'Admin Password' field on the Change Password
-# form to verify that it is indeed the admin logged-in who wants to change
-# the password.
-#ENFORCE_PASSWORD_CHECK = False
-
-# Modules that provide /auth routes that can be used to handle different types
-# of user authentication. Add auth plugins that require extra route handling to
-# this list.
-#AUTHENTICATION_URLS = [
-#    'openstack_auth.urls',
-#]
-
-# The Horizon Policy Enforcement engine uses these values to load per service
-# policy rule files. The content of these files should match the files the
-# OpenStack services are using to determine role based access control in the
-# target installation.
-
-# Path to directory containing policy.json files
-#POLICY_FILES_PATH = os.path.join(ROOT_PATH, "conf")
-
-# Map of local copy of service policy files.
-# Please insure that your identity policy file matches the one being used on
-# your keystone servers. There is an alternate policy file that may be used
-# in the Keystone v3 multi-domain case, policy.v3cloudsample.json.
-# This file is not included in the Horizon repository by default but can be
-# found at
-# http://git.openstack.org/cgit/openstack/keystone/tree/etc/ \
-# policy.v3cloudsample.json
-# Having matching policy files on the Horizon and Keystone servers is essential
-# for normal operation. This holds true for all services and their policy files.
-#POLICY_FILES = {
-#    'identity': 'keystone_policy.json',
-#    'compute': 'nova_policy.json',
-#    'volume': 'cinder_policy.json',
-#    'image': 'glance_policy.json',
-#    'orchestration': 'heat_policy.json',
-#    'network': 'neutron_policy.json',
-#}
-
-# TODO: (david-lyle) remove when plugins support adding settings.
-# Note: Only used when trove-dashboard plugin is configured to be used by
-# Horizon.
-# Trove user and database extension support. By default support for
-# creating users and databases on database instances is turned on.
-# To disable these extensions set the permission here to something
-# unusable such as ["!"].
-#TROVE_ADD_USER_PERMS = []
-#TROVE_ADD_DATABASE_PERMS = []
-
-# Change this patch to the appropriate list of tuples containing
-# a key, label and static directory containing two files:
-# _variables.scss and _styles.scss
-#AVAILABLE_THEMES = [
-#    ('default', 'Default', 'themes/default'),
-#    ('material', 'Material', 'themes/material'),
-#]
-
-LOGGING = {
-    'version': 1,
-    # When set to True this will disable all logging except
-    # for loggers specified in this configuration dictionary. Note that
-    # if nothing is specified here and disable_existing_loggers is True,
-    # django.db.backends will still log unless it is disabled explicitly.
-    'disable_existing_loggers': False,
-    # If apache2 mod_wsgi is used to deploy OpenStack dashboard
-    # timestamp is output by mod_wsgi. If WSGI framework you use does not
-    # output timestamp for logging, add %(asctime)s in the following
-    # format definitions.
-    'formatters': {
-        'console': {
-            'format': '%(levelname)s %(name)s %(message)s'
-        },
-        'operation': {
-            # The format of "%(message)s" is defined by
-            # OPERATION_LOG_OPTIONS['format']
-            'format': '%(message)s'
-        },
-    },
-    'handlers': {
-        'null': {
-            'level': 'DEBUG',
-            'class': 'logging.NullHandler',
-        },
-        'console': {
-            # Set the level to "DEBUG" for verbose output logging.
-            'level': 'INFO',
-            'class': 'logging.StreamHandler',
-            'formatter': 'console',
-        },
-        'operation': {
-            'level': 'INFO',
-            'class': 'logging.StreamHandler',
-            'formatter': 'operation',
-        },
-    },
-    'loggers': {
-        # Logging from django.db.backends is VERY verbose, send to null
-        # by default.
-        'django.db.backends': {
-            'handlers': ['null'],
-            'propagate': False,
-        },
-        'requests': {
-            'handlers': ['null'],
-            'propagate': False,
-        },
-        'horizon': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'horizon.operation_log': {
-            'handlers': ['operation'],
-            'level': 'INFO',
-            'propagate': False,
-        },
-        'openstack_dashboard': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'novaclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'cinderclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'keystoneclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'glanceclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'neutronclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'heatclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'swiftclient': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'openstack_auth': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'nose.plugins.manager': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'django': {
-            'handlers': ['console'],
-            'level': 'DEBUG',
-            'propagate': False,
-        },
-        'iso8601': {
-            'handlers': ['null'],
-            'propagate': False,
-        },
-        'scss': {
-            'handlers': ['null'],
-            'propagate': False,
-        },
-    },
+    "image_type": _("Image Type")
+}
+
+HORIZON_IMAGES_UPLOAD_MODE = "legacy"
+IMAGES_ALLOW_LOCATION = True
+
+
+# Disable simplified floating IP address management for deployments with
+# multiple floating IP pools or complex network requirements.
+# HORIZON_CONFIG["simple_ip_management"] = False
+
+# The OPENSTACK_NEUTRON_NETWORK settings can be used to enable optional
+# services provided by neutron. Options currenly available are load
+# balancer service, security groups, quotas, VPN service.
+
+OPENSTACK_NEUTRON_NETWORK = {
+    'enable_lb': True,
+    'enable_firewall': False,
+    'enable_quotas': True,
+    'enable_security_group': True,
+    'enable_vpn': False,
+    # The profile_support option is used to detect if an externa lrouter can be
+    # configured via the dashboard. When using specific plugins the
+    # profile_support can be turned on if needed.
+    'profile_support': None,
+    'enable_fip_topology_check': True,
+
+    #'profile_support': 'cisco',
 }
 
 # 'direction' should not be specified for all_tcp/udp/icmp.
 # It is specified in the form.
 SECURITY_GROUP_RULES = {
     'all_tcp': {
-        'name': _('All TCP'),
+        'name': 'ALL TCP',
         'ip_protocol': 'tcp',
         'from_port': '1',
         'to_port': '65535',
     },
     'all_udp': {
-        'name': _('All UDP'),
+        'name': 'ALL UDP',
         'ip_protocol': 'udp',
         'from_port': '1',
         'to_port': '65535',
     },
     'all_icmp': {
-        'name': _('All ICMP'),
+        'name': 'ALL ICMP',
         'ip_protocol': 'icmp',
         'from_port': '-1',
         'to_port': '-1',
@@ -755,160 +524,7 @@
     },
 }
 
-# Deprecation Notice:
-#
-# The setting FLAVOR_EXTRA_KEYS has been deprecated.
-# Please load extra spec metadata into the Glance Metadata Definition Catalog.
-#
-# The sample quota definitions can be found in:
-# <glance_source>/etc/metadefs/compute-quota.json
-#
-# The metadata definition catalog supports CLI and API:
-#  $glance --os-image-api-version 2 help md-namespace-import
-#  $glance-manage db_load_metadefs <directory_with_definition_files>
-#
-# See Metadata Definitions on: http://docs.openstack.org/developer/glance/
-
-# TODO: (david-lyle) remove when plugins support settings natively
-# Note: This is only used when the Sahara plugin is configured and enabled
-# for use in Horizon.
-# Indicate to the Sahara data processing service whether or not
-# automatic floating IP allocation is in effect.  If it is not
-# in effect, the user will be prompted to choose a floating IP
-# pool for use in their cluster.  False by default.  You would want
-# to set this to True if you were running Nova Networking with
-# auto_assign_floating_ip = True.
-#SAHARA_AUTO_IP_ALLOCATION_ENABLED = False
-
-# The hash algorithm to use for authentication tokens. This must
-# match the hash algorithm that the identity server and the
-# auth_token middleware are using. Allowed values are the
-# algorithms supported by Python's hashlib library.
-#OPENSTACK_TOKEN_HASH_ALGORITHM = 'md5'
-
-# AngularJS requires some settings to be made available to
-# the client side. Some settings are required by in-tree / built-in horizon
-# features. These settings must be added to REST_API_REQUIRED_SETTINGS in the
-# form of ['SETTING_1','SETTING_2'], etc.
-#
-# You may remove settings from this list for security purposes, but do so at
-# the risk of breaking a built-in horizon feature. These settings are required
-# for horizon to function properly. Only remove them if you know what you
-# are doing. These settings may in the future be moved to be defined within
-# the enabled panel configuration.
-# You should not add settings to this list for out of tree extensions.
-# See: https://wiki.openstack.org/wiki/Horizon/RESTAPI
-REST_API_REQUIRED_SETTINGS = ['OPENSTACK_HYPERVISOR_FEATURES',
-                              'LAUNCH_INSTANCE_DEFAULTS',
-                              'OPENSTACK_IMAGE_FORMATS',
-                              'OPENSTACK_KEYSTONE_DEFAULT_DOMAIN',
-                              'CREATE_IMAGE_DEFAULTS']
-
-# Additional settings can be made available to the client side for
-# extensibility by specifying them in REST_API_ADDITIONAL_SETTINGS
-# !! Please use extreme caution as the settings are transferred via HTTP/S
-# and are not encrypted on the browser. This is an experimental API and
-# may be deprecated in the future without notice.
-#REST_API_ADDITIONAL_SETTINGS = []
-
-###############################################################################
-# Ubuntu Settings
-###############################################################################
-
- # The default theme if no cookie is present
-DEFAULT_THEME = 'ubuntu'
-
-# Default Ubuntu apache configuration uses /horizon as the application root.
-WEBROOT='/horizon/'
-
-# By default, validation of the HTTP Host header is disabled.  Production
-# installations should have this set accordingly.  For more information
-# see https://docs.djangoproject.com/en/dev/ref/settings/.
-ALLOWED_HOSTS = '*'
-
-# Compress all assets offline as part of packaging installation
-COMPRESS_OFFLINE = True
-
-# DISALLOW_IFRAME_EMBED can be used to prevent Horizon from being embedded
-# within an iframe. Legacy browsers are still vulnerable to a Cross-Frame
-# Scripting (XFS) vulnerability, so this option allows extra security hardening
-# where iframes are not used in deployment. Default setting is True.
-# For more information see:
-# http://tinyurl.com/anticlickjack
-#DISALLOW_IFRAME_EMBED = True
-
-# Help URL can be made available for the client. To provide a help URL, edit the
-# following attribute to the URL of your choice.
-#HORIZON_CONFIG["help_url"] = "http://openstack.mycompany.org"
-
-# Settings for OperationLogMiddleware
-# OPERATION_LOG_ENABLED is flag to use the function to log an operation on
-# Horizon.
-# mask_targets is arrangement for appointing a target to mask.
-# method_targets is arrangement of HTTP method to output log.
-# format is the log contents.
-#OPERATION_LOG_ENABLED = False
-#OPERATION_LOG_OPTIONS = {
-#    'mask_fields': ['password'],
-#    'target_methods': ['POST'],
-#    'ignored_urls': ['/js/', '/static/', '^/api/'],
-#    'format': ("[%(client_ip)s] [%(domain_name)s]"
-#        " [%(domain_id)s] [%(project_name)s]"
-#        " [%(project_id)s] [%(user_name)s] [%(user_id)s] [%(request_scheme)s]"
-#        " [%(referer_url)s] [%(request_url)s] [%(message)s] [%(method)s]"
-#        " [%(http_status)s] [%(param)s]"),
-#}
-
-# The default date range in the Overview panel meters - either <today> minus N
-# days (if the value is integer N), or from the beginning of the current month
-# until today (if set to None). This setting should be used to limit the amount
-# of data fetched by default when rendering the Overview panel.
-#OVERVIEW_DAYS_RANGE = 1
-
-# To allow operators to require users provide a search criteria first
-# before loading any data into the views, set the following dict
-# attributes to True in each one of the panels you want to enable this feature.
-# Follow the convention <dashboard>.<view>
-#FILTER_DATA_FIRST = {
-#    'admin.instances': False,
-#    'admin.images': False,
-#    'admin.networks': False,
-#    'admin.routers': False,
-#    'admin.volumes': False,
-#    'identity.users': False,
-#    'identity.projects': False,
-#    'identity.groups': False,
-#    'identity.roles': False
-#}
-
-# Dict used to restrict user private subnet cidr range.
-# An empty list means that user input will not be restricted
-# for a corresponding IP version. By default, there is
-# no restriction for IPv4 or IPv6. To restrict
-# user private subnet cidr range set ALLOWED_PRIVATE_SUBNET_CIDR
-# to something like
-#ALLOWED_PRIVATE_SUBNET_CIDR = {
-#    'ipv4': ['10.0.0.0/8', '192.168.0.0/16'],
-#    'ipv6': ['fc00::/7']
-#}
-ALLOWED_PRIVATE_SUBNET_CIDR = {'ipv4': [], 'ipv6': []}
-
-# Projects and users can have extra attributes as defined by keystone v3.
-# Horizon has the ability to display these extra attributes via this setting.
-# If you'd like to display extra data in the project or user tables, set the
-# corresponding dict key to the attribute name, followed by the display name.
-# For more information, see horizon's customization (http://docs.openstack.org/developer/horizon/topics/customizing.html#horizon-customization-module-overrides)
-#PROJECT_TABLE_EXTRA_INFO = {
-#   'phone_num': _('Phone Number'),
-#}
-#USER_TABLE_EXTRA_INFO = {
-#   'phone_num': _('Phone Number'),
-#}
-
-# Password will have an expiration date when using keystone v3 and enabling the
-# feature.
-# This setting allows you to set the number of days that the user will be alerted
-# prior to the password expiration.
-# Once the password expires keystone will deny the access and users must
-# contact an admin to change their password.
-#PASSWORD_EXPIRES_WARNING_THRESHOLD_DAYS = 0+
+
+
+

2018-05-09 23:39:48,131 [salt.state       ][INFO    ][17970] Loading fresh modules for state activity
2018-05-09 23:39:48,175 [salt.state       ][INFO    ][17970] Completed state [/etc/openstack-dashboard/local_settings.py] at time 23:39:48.175673 duration_in_ms=509.244
2018-05-09 23:39:48,179 [salt.state       ][INFO    ][17970] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/nova_policy.json] at time 23:39:48.179633
2018-05-09 23:39:48,179 [salt.state       ][INFO    ][17970] Executing state file.managed for /usr/share/openstack-dashboard/openstack_dashboard/conf/nova_policy.json
2018-05-09 23:39:48,211 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/pike/nova_policy.json'
2018-05-09 23:39:48,216 [salt.state       ][INFO    ][17970] File changed:
--- 
+++ 
@@ -2,175 +2,436 @@
     "context_is_admin":  "role:admin",
     "admin_or_owner":  "is_admin:True or project_id:%(project_id)s",
     "default": "rule:admin_or_owner",
+
+    "cells_scheduler_filter:TargetCellFilter": "is_admin:True",
+
+    "compute:create": "rule:admin_or_owner",
+    "compute:create:attach_network": "rule:admin_or_owner",
+    "compute:create:attach_volume": "rule:admin_or_owner",
+    "compute:create:forced_host": "is_admin:True",
+
+    "compute:get": "rule:admin_or_owner",
+    "compute:get_all": "rule:admin_or_owner",
+    "compute:get_all_tenants": "is_admin:True",
+
+    "compute:update": "rule:admin_or_owner",
+
+    "compute:get_instance_metadata": "rule:admin_or_owner",
+    "compute:get_all_instance_metadata": "rule:admin_or_owner",
+    "compute:get_all_instance_system_metadata": "rule:admin_or_owner",
+    "compute:update_instance_metadata": "rule:admin_or_owner",
+    "compute:delete_instance_metadata": "rule:admin_or_owner",
+
+    "compute:get_diagnostics": "rule:admin_or_owner",
+    "compute:get_instance_diagnostics": "rule:admin_or_owner",
+
+    "compute:start": "rule:admin_or_owner",
+    "compute:stop": "rule:admin_or_owner",
+
+    "compute:lock": "rule:admin_or_owner",
+    "compute:unlock": "rule:admin_or_owner",
+    "compute:unlock_override": "rule:admin_api",
+
+    "compute:get_vnc_console": "rule:admin_or_owner",
+    "compute:get_spice_console": "rule:admin_or_owner",
+    "compute:get_rdp_console": "rule:admin_or_owner",
+    "compute:get_serial_console": "rule:admin_or_owner",
+    "compute:get_mks_console": "rule:admin_or_owner",
+    "compute:get_console_output": "rule:admin_or_owner",
+
+    "compute:reset_network": "rule:admin_or_owner",
+    "compute:inject_network_info": "rule:admin_or_owner",
+    "compute:add_fixed_ip": "rule:admin_or_owner",
+    "compute:remove_fixed_ip": "rule:admin_or_owner",
+
+    "compute:attach_volume": "rule:admin_or_owner",
+    "compute:detach_volume": "rule:admin_or_owner",
+    "compute:swap_volume": "rule:admin_api",
+
+    "compute:attach_interface": "rule:admin_or_owner",
+    "compute:detach_interface": "rule:admin_or_owner",
+
+    "compute:set_admin_password": "rule:admin_or_owner",
+
+    "compute:rescue": "rule:admin_or_owner",
+    "compute:unrescue": "rule:admin_or_owner",
+
+    "compute:suspend": "rule:admin_or_owner",
+    "compute:resume": "rule:admin_or_owner",
+
+    "compute:pause": "rule:admin_or_owner",
+    "compute:unpause": "rule:admin_or_owner",
+
+    "compute:shelve": "rule:admin_or_owner",
+    "compute:shelve_offload": "rule:admin_or_owner",
+    "compute:unshelve": "rule:admin_or_owner",
+
+    "compute:snapshot": "rule:admin_or_owner",
+    "compute:snapshot_volume_backed": "rule:admin_or_owner",
+    "compute:backup": "rule:admin_or_owner",
+
+    "compute:resize": "rule:admin_or_owner",
+    "compute:confirm_resize": "rule:admin_or_owner",
+    "compute:revert_resize": "rule:admin_or_owner",
+
+    "compute:rebuild": "rule:admin_or_owner",
+    "compute:reboot": "rule:admin_or_owner",
+    "compute:delete": "rule:admin_or_owner",
+    "compute:soft_delete": "rule:admin_or_owner",
+    "compute:force_delete": "rule:admin_or_owner",
+
+    "compute:security_groups:add_to_instance": "rule:admin_or_owner",
+    "compute:security_groups:remove_from_instance": "rule:admin_or_owner",
+
+    "compute:restore": "rule:admin_or_owner",
+
+    "compute:volume_snapshot_create": "rule:admin_or_owner",
+    "compute:volume_snapshot_delete": "rule:admin_or_owner",
+
     "admin_api": "is_admin:True",
-
+    "compute_extension:accounts": "rule:admin_api",
+    "compute_extension:admin_actions": "rule:admin_api",
+    "compute_extension:admin_actions:pause": "rule:admin_or_owner",
+    "compute_extension:admin_actions:unpause": "rule:admin_or_owner",
+    "compute_extension:admin_actions:suspend": "rule:admin_or_owner",
+    "compute_extension:admin_actions:resume": "rule:admin_or_owner",
+    "compute_extension:admin_actions:lock": "rule:admin_or_owner",
+    "compute_extension:admin_actions:unlock": "rule:admin_or_owner",
+    "compute_extension:admin_actions:resetNetwork": "rule:admin_api",
+    "compute_extension:admin_actions:injectNetworkInfo": "rule:admin_api",
+    "compute_extension:admin_actions:createBackup": "rule:admin_or_owner",
+    "compute_extension:admin_actions:migrateLive": "rule:admin_api",
+    "compute_extension:admin_actions:resetState": "rule:admin_api",
+    "compute_extension:admin_actions:migrate": "rule:admin_api",
+    "compute_extension:aggregates": "rule:admin_api",
+    "compute_extension:agents": "rule:admin_api",
+    "compute_extension:attach_interfaces": "rule:admin_or_owner",
+    "compute_extension:baremetal_nodes": "rule:admin_api",
+    "compute_extension:cells": "rule:admin_api",
+    "compute_extension:cells:create": "rule:admin_api",
+    "compute_extension:cells:delete": "rule:admin_api",
+    "compute_extension:cells:update": "rule:admin_api",
+    "compute_extension:cells:sync_instances": "rule:admin_api",
+    "compute_extension:certificates": "rule:admin_or_owner",
+    "compute_extension:cloudpipe": "rule:admin_api",
+    "compute_extension:cloudpipe_update": "rule:admin_api",
+    "compute_extension:config_drive": "rule:admin_or_owner",
+    "compute_extension:console_output": "rule:admin_or_owner",
+    "compute_extension:consoles": "rule:admin_or_owner",
+    "compute_extension:createserverext": "rule:admin_or_owner",
+    "compute_extension:deferred_delete": "rule:admin_or_owner",
+    "compute_extension:disk_config": "rule:admin_or_owner",
+    "compute_extension:evacuate": "rule:admin_api",
+    "compute_extension:extended_server_attributes": "rule:admin_api",
+    "compute_extension:extended_status": "rule:admin_or_owner",
+    "compute_extension:extended_availability_zone": "rule:admin_or_owner",
+    "compute_extension:extended_ips": "rule:admin_or_owner",
+    "compute_extension:extended_ips_mac": "rule:admin_or_owner",
+    "compute_extension:extended_vif_net": "rule:admin_or_owner",
+    "compute_extension:extended_volumes": "rule:admin_or_owner",
+    "compute_extension:fixed_ips": "rule:admin_api",
+    "compute_extension:flavor_access": "rule:admin_or_owner",
+    "compute_extension:flavor_access:addTenantAccess": "rule:admin_api",
+    "compute_extension:flavor_access:removeTenantAccess": "rule:admin_api",
+    "compute_extension:flavor_disabled": "rule:admin_or_owner",
+    "compute_extension:flavor_rxtx": "rule:admin_or_owner",
+    "compute_extension:flavor_swap": "rule:admin_or_owner",
+    "compute_extension:flavorextradata": "rule:admin_or_owner",
+    "compute_extension:flavorextraspecs:index": "rule:admin_or_owner",
+    "compute_extension:flavorextraspecs:show": "rule:admin_or_owner",
+    "compute_extension:flavorextraspecs:create": "rule:admin_api",
+    "compute_extension:flavorextraspecs:update": "rule:admin_api",
+    "compute_extension:flavorextraspecs:delete": "rule:admin_api",
+    "compute_extension:flavormanage": "rule:admin_api",
+    "compute_extension:floating_ip_dns": "rule:admin_or_owner",
+    "compute_extension:floating_ip_pools": "rule:admin_or_owner",
+    "compute_extension:floating_ips": "rule:admin_or_owner",
+    "compute_extension:floating_ips_bulk": "rule:admin_api",
+    "compute_extension:fping": "rule:admin_or_owner",
+    "compute_extension:fping:all_tenants": "rule:admin_api",
+    "compute_extension:hide_server_addresses": "is_admin:False",
+    "compute_extension:hosts": "rule:admin_api",
+    "compute_extension:hypervisors": "rule:admin_api",
+    "compute_extension:image_size": "rule:admin_or_owner",
+    "compute_extension:instance_actions": "rule:admin_or_owner",
+    "compute_extension:instance_actions:events": "rule:admin_api",
+    "compute_extension:instance_usage_audit_log": "rule:admin_api",
+    "compute_extension:keypairs": "rule:admin_or_owner",
+    "compute_extension:keypairs:index": "rule:admin_or_owner",
+    "compute_extension:keypairs:show": "rule:admin_or_owner",
+    "compute_extension:keypairs:create": "rule:admin_or_owner",
+    "compute_extension:keypairs:delete": "rule:admin_or_owner",
+    "compute_extension:multinic": "rule:admin_or_owner",
+    "compute_extension:networks": "rule:admin_api",
+    "compute_extension:networks:view": "rule:admin_or_owner",
+    "compute_extension:networks_associate": "rule:admin_api",
+    "compute_extension:os-tenant-networks": "rule:admin_or_owner",
+    "compute_extension:quotas:show": "rule:admin_or_owner",
+    "compute_extension:quotas:update": "rule:admin_api",
+    "compute_extension:quotas:delete": "rule:admin_api",
+    "compute_extension:quota_classes": "rule:admin_or_owner",
+    "compute_extension:rescue": "rule:admin_or_owner",
+    "compute_extension:security_group_default_rules": "rule:admin_api",
+    "compute_extension:security_groups": "rule:admin_or_owner",
+    "compute_extension:server_diagnostics": "rule:admin_api",
+    "compute_extension:server_groups": "rule:admin_or_owner",
+    "compute_extension:server_password": "rule:admin_or_owner",
+    "compute_extension:server_usage": "rule:admin_or_owner",
+    "compute_extension:services": "rule:admin_api",
+    "compute_extension:shelve": "rule:admin_or_owner",
+    "compute_extension:shelveOffload": "rule:admin_api",
+    "compute_extension:simple_tenant_usage:show": "rule:admin_or_owner",
+    "compute_extension:simple_tenant_usage:list": "rule:admin_api",
+    "compute_extension:unshelve": "rule:admin_or_owner",
+    "compute_extension:users": "rule:admin_api",
+    "compute_extension:virtual_interfaces": "rule:admin_or_owner",
+    "compute_extension:virtual_storage_arrays": "rule:admin_or_owner",
+    "compute_extension:volumes": "rule:admin_or_owner",
+    "compute_extension:volume_attachments:index": "rule:admin_or_owner",
+    "compute_extension:volume_attachments:show": "rule:admin_or_owner",
+    "compute_extension:volume_attachments:create": "rule:admin_or_owner",
+    "compute_extension:volume_attachments:update": "rule:admin_api",
+    "compute_extension:volume_attachments:delete": "rule:admin_or_owner",
+    "compute_extension:volumetypes": "rule:admin_or_owner",
+    "compute_extension:availability_zone:list": "rule:admin_or_owner",
+    "compute_extension:availability_zone:detail": "rule:admin_api",
+    "compute_extension:used_limits_for_admin": "rule:admin_api",
+    "compute_extension:migrations:index": "rule:admin_api",
+    "compute_extension:os-assisted-volume-snapshots:create": "rule:admin_api",
+    "compute_extension:os-assisted-volume-snapshots:delete": "rule:admin_api",
+    "compute_extension:console_auth_tokens": "rule:admin_api",
+    "compute_extension:os-server-external-events:create": "rule:admin_api",
+
+    "network:get_all": "rule:admin_or_owner",
+    "network:get": "rule:admin_or_owner",
+    "network:create": "rule:admin_or_owner",
+    "network:delete": "rule:admin_or_owner",
+    "network:associate": "rule:admin_or_owner",
+    "network:disassociate": "rule:admin_or_owner",
+    "network:get_vifs_by_instance": "rule:admin_or_owner",
+    "network:allocate_for_instance": "rule:admin_or_owner",
+    "network:deallocate_for_instance": "rule:admin_or_owner",
+    "network:validate_networks": "rule:admin_or_owner",
+    "network:get_instance_uuids_by_ip_filter": "rule:admin_or_owner",
+    "network:get_instance_id_by_floating_address": "rule:admin_or_owner",
+    "network:setup_networks_on_host": "rule:admin_or_owner",
+    "network:get_backdoor_port": "rule:admin_or_owner",
+
+    "network:get_floating_ip": "rule:admin_or_owner",
+    "network:get_floating_ip_pools": "rule:admin_or_owner",
+    "network:get_floating_ip_by_address": "rule:admin_or_owner",
+    "network:get_floating_ips_by_project": "rule:admin_or_owner",
+    "network:get_floating_ips_by_fixed_address": "rule:admin_or_owner",
+    "network:allocate_floating_ip": "rule:admin_or_owner",
+    "network:associate_floating_ip": "rule:admin_or_owner",
+    "network:disassociate_floating_ip": "rule:admin_or_owner",
+    "network:release_floating_ip": "rule:admin_or_owner",
+    "network:migrate_instance_start": "rule:admin_or_owner",
+    "network:migrate_instance_finish": "rule:admin_or_owner",
+
+    "network:get_fixed_ip": "rule:admin_or_owner",
+    "network:get_fixed_ip_by_address": "rule:admin_or_owner",
+    "network:add_fixed_ip_to_instance": "rule:admin_or_owner",
+    "network:remove_fixed_ip_from_instance": "rule:admin_or_owner",
+    "network:add_network_to_project": "rule:admin_or_owner",
+    "network:get_instance_nw_info": "rule:admin_or_owner",
+
+    "network:get_dns_domains": "rule:admin_or_owner",
+    "network:add_dns_entry": "rule:admin_or_owner",
+    "network:modify_dns_entry": "rule:admin_or_owner",
+    "network:delete_dns_entry": "rule:admin_or_owner",
+    "network:get_dns_entries_by_address": "rule:admin_or_owner",
+    "network:get_dns_entries_by_name": "rule:admin_or_owner",
+    "network:create_private_dns_domain": "rule:admin_or_owner",
+    "network:create_public_dns_domain": "rule:admin_or_owner",
+    "network:delete_dns_domain": "rule:admin_or_owner",
+    "network:attach_external_network": "rule:admin_api",
+    "network:get_vif_by_mac_address": "rule:admin_or_owner",
+
+    "os_compute_api:servers:detail:get_all_tenants": "is_admin:True",
+    "os_compute_api:servers:index:get_all_tenants": "is_admin:True",
+    "os_compute_api:servers:confirm_resize": "rule:admin_or_owner",
+    "os_compute_api:servers:create": "rule:admin_or_owner",
+    "os_compute_api:servers:create:attach_network": "rule:admin_or_owner",
+    "os_compute_api:servers:create:attach_volume": "rule:admin_or_owner",
+    "os_compute_api:servers:create:forced_host": "rule:admin_api",
+    "os_compute_api:servers:delete": "rule:admin_or_owner",
+    "os_compute_api:servers:update": "rule:admin_or_owner",
+    "os_compute_api:servers:detail": "rule:admin_or_owner",
+    "os_compute_api:servers:index": "rule:admin_or_owner",
+    "os_compute_api:servers:reboot": "rule:admin_or_owner",
+    "os_compute_api:servers:rebuild": "rule:admin_or_owner",
+    "os_compute_api:servers:resize": "rule:admin_or_owner",
+    "os_compute_api:servers:revert_resize": "rule:admin_or_owner",
+    "os_compute_api:servers:show": "rule:admin_or_owner",
+    "os_compute_api:servers:show:host_status": "rule:admin_api",
+    "os_compute_api:servers:create_image": "rule:admin_or_owner",
+    "os_compute_api:servers:create_image:allow_volume_backed": "rule:admin_or_owner",
+    "os_compute_api:servers:start": "rule:admin_or_owner",
+    "os_compute_api:servers:stop": "rule:admin_or_owner",
+    "os_compute_api:servers:trigger_crash_dump": "rule:admin_or_owner",
+    "os_compute_api:servers:migrations:force_complete": "rule:admin_api",
+    "os_compute_api:servers:migrations:delete": "rule:admin_api",
+    "os_compute_api:servers:discoverable": "@",
+    "os_compute_api:servers:migrations:index": "rule:admin_api",
+    "os_compute_api:servers:migrations:show": "rule:admin_api",
+    "os_compute_api:os-access-ips:discoverable": "@",
+    "os_compute_api:os-access-ips": "rule:admin_or_owner",
+    "os_compute_api:os-admin-actions": "rule:admin_api",
     "os_compute_api:os-admin-actions:discoverable": "@",
+    "os_compute_api:os-admin-actions:reset_network": "rule:admin_api",
+    "os_compute_api:os-admin-actions:inject_network_info": "rule:admin_api",
     "os_compute_api:os-admin-actions:reset_state": "rule:admin_api",
-    "os_compute_api:os-admin-actions:inject_network_info": "rule:admin_api",
-    "os_compute_api:os-admin-actions": "rule:admin_api",
-    "os_compute_api:os-admin-actions:reset_network": "rule:admin_api",
+    "os_compute_api:os-admin-password": "rule:admin_or_owner",
     "os_compute_api:os-admin-password:discoverable": "@",
-    "os_compute_api:os-admin-password": "rule:admin_or_owner",
+    "os_compute_api:os-aggregates:discoverable": "@",
+    "os_compute_api:os-aggregates:index": "rule:admin_api",
+    "os_compute_api:os-aggregates:create": "rule:admin_api",
+    "os_compute_api:os-aggregates:show": "rule:admin_api",
+    "os_compute_api:os-aggregates:update": "rule:admin_api",
+    "os_compute_api:os-aggregates:delete": "rule:admin_api",
+    "os_compute_api:os-aggregates:add_host": "rule:admin_api",
+    "os_compute_api:os-aggregates:remove_host": "rule:admin_api",
+    "os_compute_api:os-aggregates:set_metadata": "rule:admin_api",
     "os_compute_api:os-agents": "rule:admin_api",
     "os_compute_api:os-agents:discoverable": "@",
-    "os_compute_api:os-aggregates:set_metadata": "rule:admin_api",
-    "os_compute_api:os-aggregates:add_host": "rule:admin_api",
-    "os_compute_api:os-aggregates:discoverable": "@",
-    "os_compute_api:os-aggregates:create": "rule:admin_api",
-    "os_compute_api:os-aggregates:remove_host": "rule:admin_api",
-    "os_compute_api:os-aggregates:update": "rule:admin_api",
-    "os_compute_api:os-aggregates:index": "rule:admin_api",
-    "os_compute_api:os-aggregates:delete": "rule:admin_api",
-    "os_compute_api:os-aggregates:show": "rule:admin_api",
-    "os_compute_api:os-assisted-volume-snapshots:create": "rule:admin_api",
-    "os_compute_api:os-assisted-volume-snapshots:delete": "rule:admin_api",
-    "os_compute_api:os-assisted-volume-snapshots:discoverable": "@",
     "os_compute_api:os-attach-interfaces": "rule:admin_or_owner",
     "os_compute_api:os-attach-interfaces:discoverable": "@",
-    "os_compute_api:os-availability-zone:list": "rule:admin_or_owner",
-    "os_compute_api:os-availability-zone:discoverable": "@",
-    "os_compute_api:os-availability-zone:detail": "rule:admin_api",
+    "os_compute_api:os-baremetal-nodes": "rule:admin_api",
     "os_compute_api:os-baremetal-nodes:discoverable": "@",
-    "os_compute_api:os-baremetal-nodes": "rule:admin_api",
-    "network:attach_external_network": "is_admin:True",
-    "os_compute_api:os-block-device-mapping:discoverable": "@",
     "os_compute_api:os-block-device-mapping-v1:discoverable": "@",
+    "os_compute_api:os-cells": "rule:admin_api",
+    "os_compute_api:os-cells:create": "rule:admin_api",
+    "os_compute_api:os-cells:delete": "rule:admin_api",
+    "os_compute_api:os-cells:update": "rule:admin_api",
+    "os_compute_api:os-cells:sync_instances": "rule:admin_api",
     "os_compute_api:os-cells:discoverable": "@",
-    "os_compute_api:os-cells:update": "rule:admin_api",
-    "os_compute_api:os-cells:create": "rule:admin_api",
-    "os_compute_api:os-cells": "rule:admin_api",
-    "os_compute_api:os-cells:sync_instances": "rule:admin_api",
-    "os_compute_api:os-cells:delete": "rule:admin_api",
-    "cells_scheduler_filter:DifferentCellFilter": "is_admin:True",
-    "cells_scheduler_filter:TargetCellFilter": "is_admin:True",
-    "os_compute_api:os-certificates:discoverable": "@",
     "os_compute_api:os-certificates:create": "rule:admin_or_owner",
     "os_compute_api:os-certificates:show": "rule:admin_or_owner",
+    "os_compute_api:os-certificates:discoverable": "@",
     "os_compute_api:os-cloudpipe": "rule:admin_api",
     "os_compute_api:os-cloudpipe:discoverable": "@",
+    "os_compute_api:os-config-drive": "rule:admin_or_owner",
     "os_compute_api:os-config-drive:discoverable": "@",
-    "os_compute_api:os-config-drive": "rule:admin_or_owner",
-    "os_compute_api:os-console-auth-tokens:discoverable": "@",
-    "os_compute_api:os-console-auth-tokens": "rule:admin_api",
+    "os_compute_api:os-consoles:discoverable": "@",
+    "os_compute_api:os-consoles:create": "rule:admin_or_owner",
+    "os_compute_api:os-consoles:delete": "rule:admin_or_owner",
+    "os_compute_api:os-consoles:index": "rule:admin_or_owner",
+    "os_compute_api:os-consoles:show": "rule:admin_or_owner",
     "os_compute_api:os-console-output:discoverable": "@",
     "os_compute_api:os-console-output": "rule:admin_or_owner",
-    "os_compute_api:os-consoles:create": "rule:admin_or_owner",
-    "os_compute_api:os-consoles:show": "rule:admin_or_owner",
-    "os_compute_api:os-consoles:delete": "rule:admin_or_owner",
-    "os_compute_api:os-consoles:discoverable": "@",
-    "os_compute_api:os-consoles:index": "rule:admin_or_owner",
+    "os_compute_api:os-remote-consoles": "rule:admin_or_owner",
+    "os_compute_api:os-remote-consoles:discoverable": "@",
     "os_compute_api:os-create-backup:discoverable": "@",
     "os_compute_api:os-create-backup": "rule:admin_or_owner",
+    "os_compute_api:os-deferred-delete": "rule:admin_or_owner",
     "os_compute_api:os-deferred-delete:discoverable": "@",
-    "os_compute_api:os-deferred-delete": "rule:admin_or_owner",
+    "os_compute_api:os-disk-config": "rule:admin_or_owner",
+    "os_compute_api:os-disk-config:discoverable": "@",
+    "os_compute_api:os-evacuate": "rule:admin_api",
     "os_compute_api:os-evacuate:discoverable": "@",
-    "os_compute_api:os-evacuate": "rule:admin_api",
+    "os_compute_api:os-extended-server-attributes": "rule:admin_api",
+    "os_compute_api:os-extended-server-attributes:discoverable": "@",
+    "os_compute_api:os-extended-status": "rule:admin_or_owner",
+    "os_compute_api:os-extended-status:discoverable": "@",
     "os_compute_api:os-extended-availability-zone": "rule:admin_or_owner",
     "os_compute_api:os-extended-availability-zone:discoverable": "@",
-    "os_compute_api:os-extended-server-attributes": "rule:admin_api",
-    "os_compute_api:os-extended-server-attributes:discoverable": "@",
-    "os_compute_api:os-extended-status:discoverable": "@",
-    "os_compute_api:os-extended-status": "rule:admin_or_owner",
+    "os_compute_api:extensions": "rule:admin_or_owner",
+    "os_compute_api:extensions:discoverable": "@",
+    "os_compute_api:extension_info:discoverable": "@",
     "os_compute_api:os-extended-volumes": "rule:admin_or_owner",
     "os_compute_api:os-extended-volumes:discoverable": "@",
-    "os_compute_api:extension_info:discoverable": "@",
-    "os_compute_api:extensions": "rule:admin_or_owner",
-    "os_compute_api:extensions:discoverable": "@",
+    "os_compute_api:os-fixed-ips": "rule:admin_api",
     "os_compute_api:os-fixed-ips:discoverable": "@",
-    "os_compute_api:os-fixed-ips": "rule:admin_api",
-    "os_compute_api:os-flavor-access:add_tenant_access": "rule:admin_api",
+    "os_compute_api:os-flavor-access": "rule:admin_or_owner",
     "os_compute_api:os-flavor-access:discoverable": "@",
     "os_compute_api:os-flavor-access:remove_tenant_access": "rule:admin_api",
-    "os_compute_api:os-flavor-access": "rule:admin_or_owner",
+    "os_compute_api:os-flavor-access:add_tenant_access": "rule:admin_api",
+    "os_compute_api:os-flavor-rxtx": "rule:admin_or_owner",
+    "os_compute_api:os-flavor-rxtx:discoverable": "@",
+    "os_compute_api:flavors": "rule:admin_or_owner",
+    "os_compute_api:flavors:discoverable": "@",
+    "os_compute_api:os-flavor-extra-specs:discoverable": "@",
+    "os_compute_api:os-flavor-extra-specs:index": "rule:admin_or_owner",
     "os_compute_api:os-flavor-extra-specs:show": "rule:admin_or_owner",
     "os_compute_api:os-flavor-extra-specs:create": "rule:admin_api",
-    "os_compute_api:os-flavor-extra-specs:discoverable": "@",
     "os_compute_api:os-flavor-extra-specs:update": "rule:admin_api",
     "os_compute_api:os-flavor-extra-specs:delete": "rule:admin_api",
-    "os_compute_api:os-flavor-extra-specs:index": "rule:admin_or_owner",
+    "os_compute_api:os-flavor-manage:discoverable": "@",
     "os_compute_api:os-flavor-manage": "rule:admin_api",
-    "os_compute_api:os-flavor-manage:discoverable": "@",
-    "os_compute_api:os-flavor-rxtx": "rule:admin_or_owner",
-    "os_compute_api:os-flavor-rxtx:discoverable": "@",
-    "os_compute_api:flavors:discoverable": "@",
-    "os_compute_api:flavors": "rule:admin_or_owner",
     "os_compute_api:os-floating-ip-dns": "rule:admin_or_owner",
+    "os_compute_api:os-floating-ip-dns:discoverable": "@",
     "os_compute_api:os-floating-ip-dns:domain:update": "rule:admin_api",
-    "os_compute_api:os-floating-ip-dns:discoverable": "@",
     "os_compute_api:os-floating-ip-dns:domain:delete": "rule:admin_api",
+    "os_compute_api:os-floating-ip-pools": "rule:admin_or_owner",
     "os_compute_api:os-floating-ip-pools:discoverable": "@",
-    "os_compute_api:os-floating-ip-pools": "rule:admin_or_owner",
     "os_compute_api:os-floating-ips": "rule:admin_or_owner",
     "os_compute_api:os-floating-ips:discoverable": "@",
+    "os_compute_api:os-floating-ips-bulk": "rule:admin_api",
     "os_compute_api:os-floating-ips-bulk:discoverable": "@",
-    "os_compute_api:os-floating-ips-bulk": "rule:admin_api",
+    "os_compute_api:os-fping": "rule:admin_or_owner",
+    "os_compute_api:os-fping:discoverable": "@",
     "os_compute_api:os-fping:all_tenants": "rule:admin_api",
-    "os_compute_api:os-fping:discoverable": "@",
-    "os_compute_api:os-fping": "rule:admin_or_owner",
+    "os_compute_api:os-hide-server-addresses": "is_admin:False",
     "os_compute_api:os-hide-server-addresses:discoverable": "@",
-    "os_compute_api:os-hide-server-addresses": "is_admin:False",
+    "os_compute_api:os-hosts": "rule:admin_api",
     "os_compute_api:os-hosts:discoverable": "@",
-    "os_compute_api:os-hosts": "rule:admin_api",
+    "os_compute_api:os-hypervisors": "rule:admin_api",
     "os_compute_api:os-hypervisors:discoverable": "@",
-    "os_compute_api:os-hypervisors": "rule:admin_api",
-    "os_compute_api:image-metadata:discoverable": "@",
+    "os_compute_api:images:discoverable": "@",
+    "os_compute_api:image-size": "rule:admin_or_owner",
     "os_compute_api:image-size:discoverable": "@",
-    "os_compute_api:image-size": "rule:admin_or_owner",
-    "os_compute_api:images:discoverable": "@",
-    "os_compute_api:os-instance-actions:events": "rule:admin_api",
     "os_compute_api:os-instance-actions": "rule:admin_or_owner",
     "os_compute_api:os-instance-actions:discoverable": "@",
+    "os_compute_api:os-instance-actions:events": "rule:admin_api",
     "os_compute_api:os-instance-usage-audit-log": "rule:admin_api",
     "os_compute_api:os-instance-usage-audit-log:discoverable": "@",
     "os_compute_api:ips:discoverable": "@",
+    "os_compute_api:ips:index": "rule:admin_or_owner",
     "os_compute_api:ips:show": "rule:admin_or_owner",
-    "os_compute_api:ips:index": "rule:admin_or_owner",
     "os_compute_api:os-keypairs:discoverable": "@",
+    "os_compute_api:os-keypairs": "rule:admin_or_owner",
     "os_compute_api:os-keypairs:index": "rule:admin_api or user_id:%(user_id)s",
+    "os_compute_api:os-keypairs:show": "rule:admin_api or user_id:%(user_id)s",
     "os_compute_api:os-keypairs:create": "rule:admin_api or user_id:%(user_id)s",
     "os_compute_api:os-keypairs:delete": "rule:admin_api or user_id:%(user_id)s",
-    "os_compute_api:os-keypairs:show": "rule:admin_api or user_id:%(user_id)s",
-    "os_compute_api:os-keypairs": "rule:admin_or_owner",
     "os_compute_api:limits:discoverable": "@",
     "os_compute_api:limits": "rule:admin_or_owner",
     "os_compute_api:os-lock-server:discoverable": "@",
     "os_compute_api:os-lock-server:lock": "rule:admin_or_owner",
+    "os_compute_api:os-lock-server:unlock": "rule:admin_or_owner",
     "os_compute_api:os-lock-server:unlock:unlock_override": "rule:admin_api",
-    "os_compute_api:os-lock-server:unlock": "rule:admin_or_owner",
+    "os_compute_api:os-migrate-server:discoverable": "@",
     "os_compute_api:os-migrate-server:migrate": "rule:admin_api",
-    "os_compute_api:os-migrate-server:discoverable": "@",
     "os_compute_api:os-migrate-server:migrate_live": "rule:admin_api",
-    "os_compute_api:os-migrations:index": "rule:admin_api",
-    "os_compute_api:os-migrations:discoverable": "@",
     "os_compute_api:os-multinic": "rule:admin_or_owner",
     "os_compute_api:os-multinic:discoverable": "@",
-    "os_compute_api:os-multiple-create:discoverable": "@",
-    "os_compute_api:os-networks:discoverable": "@",
     "os_compute_api:os-networks": "rule:admin_api",
     "os_compute_api:os-networks:view": "rule:admin_or_owner",
+    "os_compute_api:os-networks:discoverable": "@",
     "os_compute_api:os-networks-associate": "rule:admin_api",
     "os_compute_api:os-networks-associate:discoverable": "@",
-    "os_compute_api:os-pause-server:unpause": "rule:admin_or_owner",
     "os_compute_api:os-pause-server:discoverable": "@",
     "os_compute_api:os-pause-server:pause": "rule:admin_or_owner",
+    "os_compute_api:os-pause-server:unpause": "rule:admin_or_owner",
+    "os_compute_api:os-pci:pci_servers": "rule:admin_or_owner",
+    "os_compute_api:os-pci:discoverable": "@",
     "os_compute_api:os-pci:index": "rule:admin_api",
     "os_compute_api:os-pci:detail": "rule:admin_api",
-    "os_compute_api:os-pci:pci_servers": "rule:admin_or_owner",
     "os_compute_api:os-pci:show": "rule:admin_api",
-    "os_compute_api:os-pci:discoverable": "@",
+    "os_compute_api:os-personality:discoverable": "@",
+    "os_compute_api:os-preserve-ephemeral-rebuild:discoverable": "@",
+    "os_compute_api:os-quota-sets:discoverable": "@",
+    "os_compute_api:os-quota-sets:show": "rule:admin_or_owner",
+    "os_compute_api:os-quota-sets:defaults": "@",
+    "os_compute_api:os-quota-sets:update": "rule:admin_api",
+    "os_compute_api:os-quota-sets:delete": "rule:admin_api",
+    "os_compute_api:os-quota-sets:detail": "rule:admin_api",
+    "os_compute_api:os-quota-class-sets:update": "rule:admin_api",
     "os_compute_api:os-quota-class-sets:show": "is_admin:True or quota_class:%(quota_class)s",
     "os_compute_api:os-quota-class-sets:discoverable": "@",
-    "os_compute_api:os-quota-class-sets:update": "rule:admin_api",
-    "os_compute_api:os-quota-sets:update": "rule:admin_api",
-    "os_compute_api:os-quota-sets:defaults": "@",
-    "os_compute_api:os-quota-sets:show": "rule:admin_or_owner",
-    "os_compute_api:os-quota-sets:delete": "rule:admin_api",
-    "os_compute_api:os-quota-sets:discoverable": "@",
-    "os_compute_api:os-quota-sets:detail": "rule:admin_api",
-    "os_compute_api:os-remote-consoles": "rule:admin_or_owner",
-    "os_compute_api:os-remote-consoles:discoverable": "@",
+    "os_compute_api:os-rescue": "rule:admin_or_owner",
     "os_compute_api:os-rescue:discoverable": "@",
-    "os_compute_api:os-rescue": "rule:admin_or_owner",
     "os_compute_api:os-scheduler-hints:discoverable": "@",
     "os_compute_api:os-security-group-default-rules:discoverable": "@",
     "os_compute_api:os-security-group-default-rules": "rule:admin_api",
@@ -178,82 +439,62 @@
     "os_compute_api:os-security-groups:discoverable": "@",
     "os_compute_api:os-server-diagnostics": "rule:admin_api",
     "os_compute_api:os-server-diagnostics:discoverable": "@",
-    "os_compute_api:os-server-external-events:create": "rule:admin_api",
-    "os_compute_api:os-server-external-events:discoverable": "@",
+    "os_compute_api:os-server-password": "rule:admin_or_owner",
+    "os_compute_api:os-server-password:discoverable": "@",
+    "os_compute_api:os-server-usage": "rule:admin_or_owner",
+    "os_compute_api:os-server-usage:discoverable": "@",
+    "os_compute_api:os-server-groups": "rule:admin_or_owner",
     "os_compute_api:os-server-groups:discoverable": "@",
-    "os_compute_api:os-server-groups": "rule:admin_or_owner",
+    "os_compute_api:os-server-tags:index": "@",
+    "os_compute_api:os-server-tags:show": "@",
+    "os_compute_api:os-server-tags:update": "@",
+    "os_compute_api:os-server-tags:update_all": "@",
+    "os_compute_api:os-server-tags:delete": "@",
+    "os_compute_api:os-server-tags:delete_all": "@",
+    "os_compute_api:os-services": "rule:admin_api",
+    "os_compute_api:os-services:discoverable": "@",
+    "os_compute_api:server-metadata:discoverable": "@",
     "os_compute_api:server-metadata:index": "rule:admin_or_owner",
     "os_compute_api:server-metadata:show": "rule:admin_or_owner",
+    "os_compute_api:server-metadata:delete": "rule:admin_or_owner",
     "os_compute_api:server-metadata:create": "rule:admin_or_owner",
-    "os_compute_api:server-metadata:discoverable": "@",
+    "os_compute_api:server-metadata:update": "rule:admin_or_owner",
     "os_compute_api:server-metadata:update_all": "rule:admin_or_owner",
-    "os_compute_api:server-metadata:delete": "rule:admin_or_owner",
-    "os_compute_api:server-metadata:update": "rule:admin_or_owner",
-    "os_compute_api:os-server-password": "rule:admin_or_owner",
-    "os_compute_api:os-server-password:discoverable": "@",
-    "os_compute_api:os-server-tags:delete_all": "@",
-    "os_compute_api:os-server-tags:index": "@",
-    "os_compute_api:os-server-tags:update_all": "@",
-    "os_compute_api:os-server-tags:delete": "@",
-    "os_compute_api:os-server-tags:update": "@",
-    "os_compute_api:os-server-tags:show": "@",
-    "os_compute_api:os-server-tags:discoverable": "@",
-    "os_compute_api:os-server-usage": "rule:admin_or_owner",
-    "os_compute_api:os-server-usage:discoverable": "@",
-    "os_compute_api:servers:index": "rule:admin_or_owner",
-    "os_compute_api:servers:detail": "rule:admin_or_owner",
-    "os_compute_api:servers:detail:get_all_tenants": "rule:admin_api",
-    "os_compute_api:servers:index:get_all_tenants": "rule:admin_api",
-    "os_compute_api:servers:show": "rule:admin_or_owner",
-    "os_compute_api:servers:show:host_status": "rule:admin_api",
-    "os_compute_api:servers:create": "rule:admin_or_owner",
-    "os_compute_api:servers:create:forced_host": "rule:admin_or_owner",
-    "os_compute_api:servers:create:attach_volume": "rule:admin_or_owner",
-    "os_compute_api:servers:create:attach_network": "rule:admin_or_owner",
-    "os_compute_api:servers:delete": "rule:admin_or_owner",
-    "os_compute_api:servers:update": "rule:admin_or_owner",
-    "os_compute_api:servers:confirm_resize": "rule:admin_or_owner",
-    "os_compute_api:servers:revert_resize": "rule:admin_or_owner",
-    "os_compute_api:servers:reboot": "rule:admin_or_owner",
-    "os_compute_api:servers:resize": "rule:admin_or_owner",
-    "os_compute_api:servers:rebuild": "rule:admin_or_owner",
-    "os_compute_api:servers:create_image": "rule:admin_or_owner",
-    "os_compute_api:servers:create_image:allow_volume_backed": "rule:admin_or_owner",
-    "os_compute_api:servers:start": "rule:admin_or_owner",
-    "os_compute_api:servers:stop": "rule:admin_or_owner",
-    "os_compute_api:servers:trigger_crash_dump": "rule:admin_or_owner",
-    "os_compute_api:servers:discoverable": "@",
-    "os_compute_api:servers:migrations:show": "rule:admin_api",
-    "os_compute_api:servers:migrations:force_complete": "rule:admin_api",
-    "os_compute_api:servers:migrations:delete": "rule:admin_api",
-    "os_compute_api:servers:migrations:index": "rule:admin_api",
-    "os_compute_api:server-migrations:discoverable": "@",
-    "os_compute_api:os-services": "rule:admin_api",
-    "os_compute_api:os-services:discoverable": "@",
     "os_compute_api:os-shelve:shelve": "rule:admin_or_owner",
-    "os_compute_api:os-shelve:unshelve": "rule:admin_or_owner",
+    "os_compute_api:os-shelve:shelve:discoverable": "@",
     "os_compute_api:os-shelve:shelve_offload": "rule:admin_api",
-    "os_compute_api:os-shelve:discoverable": "@",
+    "os_compute_api:os-simple-tenant-usage:discoverable": "@",
     "os_compute_api:os-simple-tenant-usage:show": "rule:admin_or_owner",
     "os_compute_api:os-simple-tenant-usage:list": "rule:admin_api",
-    "os_compute_api:os-simple-tenant-usage:discoverable": "@",
+    "os_compute_api:os-suspend-server:discoverable": "@",
+    "os_compute_api:os-suspend-server:suspend": "rule:admin_or_owner",
     "os_compute_api:os-suspend-server:resume": "rule:admin_or_owner",
-    "os_compute_api:os-suspend-server:suspend": "rule:admin_or_owner",
-    "os_compute_api:os-suspend-server:discoverable": "@",
     "os_compute_api:os-tenant-networks": "rule:admin_or_owner",
     "os_compute_api:os-tenant-networks:discoverable": "@",
+    "os_compute_api:os-shelve:unshelve": "rule:admin_or_owner",
+    "os_compute_api:os-user-data:discoverable": "@",
+    "os_compute_api:os-virtual-interfaces": "rule:admin_or_owner",
+    "os_compute_api:os-virtual-interfaces:discoverable": "@",
+    "os_compute_api:os-volumes": "rule:admin_or_owner",
+    "os_compute_api:os-volumes:discoverable": "@",
+    "os_compute_api:os-volumes-attachments:index": "rule:admin_or_owner",
+    "os_compute_api:os-volumes-attachments:show": "rule:admin_or_owner",
+    "os_compute_api:os-volumes-attachments:create": "rule:admin_or_owner",
+    "os_compute_api:os-volumes-attachments:update": "rule:admin_api",
+    "os_compute_api:os-volumes-attachments:delete": "rule:admin_or_owner",
+    "os_compute_api:os-volumes-attachments:discoverable": "@",
+    "os_compute_api:os-availability-zone:list": "rule:admin_or_owner",
+    "os_compute_api:os-availability-zone:discoverable": "@",
+    "os_compute_api:os-availability-zone:detail": "rule:admin_api",
+    "os_compute_api:os-used-limits": "rule:admin_api",
     "os_compute_api:os-used-limits:discoverable": "@",
-    "os_compute_api:os-used-limits": "rule:admin_api",
-    "os_compute_api:os-user-data:discoverable": "@",
-    "os_compute_api:versions:discoverable": "@",
-    "os_compute_api:os-virtual-interfaces:discoverable": "@",
-    "os_compute_api:os-virtual-interfaces": "rule:admin_or_owner",
-    "os_compute_api:os-volumes:discoverable": "@",
-    "os_compute_api:os-volumes": "rule:admin_or_owner",
-    "os_compute_api:os-volumes-attachments:index": "rule:admin_or_owner",
-    "os_compute_api:os-volumes-attachments:create": "rule:admin_or_owner",
-    "os_compute_api:os-volumes-attachments:show": "rule:admin_or_owner",
-    "os_compute_api:os-volumes-attachments:discoverable": "@",
-    "os_compute_api:os-volumes-attachments:update": "rule:admin_api",
-    "os_compute_api:os-volumes-attachments:delete": "rule:admin_or_owner"
+    "os_compute_api:os-migrations:index": "rule:admin_api",
+    "os_compute_api:os-migrations:discoverable": "@",
+    "os_compute_api:os-assisted-volume-snapshots:create": "rule:admin_api",
+    "os_compute_api:os-assisted-volume-snapshots:delete": "rule:admin_api",
+    "os_compute_api:os-assisted-volume-snapshots:discoverable": "@",
+    "os_compute_api:os-console-auth-tokens": "rule:admin_api",
+    "os_compute_api:os-console-auth-tokens:discoverable": "@",
+    "os_compute_api:os-server-external-events:create": "rule:admin_api",
+    "os_compute_api:os-server-external-events:discoverable": "@"
 }

2018-05-09 23:39:48,217 [salt.state       ][INFO    ][17970] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/nova_policy.json] at time 23:39:48.217552 duration_in_ms=37.919
2018-05-09 23:39:48,218 [salt.state       ][INFO    ][17970] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/neutron_policy.json] at time 23:39:48.217969
2018-05-09 23:39:48,218 [salt.state       ][INFO    ][17970] Executing state file.managed for /usr/share/openstack-dashboard/openstack_dashboard/conf/neutron_policy.json
2018-05-09 23:39:48,235 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/pike/neutron_policy.json'
2018-05-09 23:39:48,237 [salt.state       ][INFO    ][17970] File changed:
--- 
+++ 
@@ -8,6 +8,8 @@
     "admin_only": "rule:context_is_admin",
     "regular_user": "",
     "shared": "field:networks:shared=True",
+    "shared_firewalls": "field:firewalls:shared=True",
+    "shared_firewall_policies": "field:firewall_policies:shared=True",
     "shared_subnetpools": "field:subnetpools:shared=True",
     "shared_address_scopes": "field:address_scopes:shared=True",
     "external": "field:networks:router:external=True",
@@ -111,8 +113,27 @@
     "create_router:external_gateway_info:external_fixed_ips": "rule:admin_only",
     "update_router:external_gateway_info:external_fixed_ips": "rule:admin_only",
 
+    "create_firewall": "",
+    "get_firewall": "rule:admin_or_owner",
+    "create_firewall:shared": "rule:admin_only",
+    "get_firewall:shared": "rule:admin_only",
+    "update_firewall": "rule:admin_or_owner",
+    "update_firewall:shared": "rule:admin_only",
+    "delete_firewall": "rule:admin_or_owner",
+
+    "create_firewall_policy": "",
+    "get_firewall_policy": "rule:admin_or_owner or rule:shared_firewall_policies",
+    "create_firewall_policy:shared": "rule:admin_or_owner",
+    "update_firewall_policy": "rule:admin_or_owner",
+    "delete_firewall_policy": "rule:admin_or_owner",
+
     "insert_rule": "rule:admin_or_owner",
     "remove_rule": "rule:admin_or_owner",
+
+    "create_firewall_rule": "",
+    "get_firewall_rule": "rule:admin_or_owner or rule:shared_firewalls",
+    "update_firewall_rule": "rule:admin_or_owner",
+    "delete_firewall_rule": "rule:admin_or_owner",
 
     "create_qos_queue": "rule:admin_only",
     "get_qos_queue": "rule:admin_only",

2018-05-09 23:39:48,237 [salt.state       ][INFO    ][17970] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/neutron_policy.json] at time 23:39:48.237700 duration_in_ms=19.731
2018-05-09 23:39:48,238 [salt.state       ][INFO    ][17970] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/glance_policy.json] at time 23:39:48.238100
2018-05-09 23:39:48,238 [salt.state       ][INFO    ][17970] Executing state file.managed for /usr/share/openstack-dashboard/openstack_dashboard/conf/glance_policy.json
2018-05-09 23:39:48,255 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/pike/glance_policy.json'
2018-05-09 23:39:48,256 [salt.state       ][INFO    ][17970] File /usr/share/openstack-dashboard/openstack_dashboard/conf/glance_policy.json is in the correct state
2018-05-09 23:39:48,256 [salt.state       ][INFO    ][17970] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/glance_policy.json] at time 23:39:48.256542 duration_in_ms=18.442
2018-05-09 23:39:48,256 [salt.state       ][INFO    ][17970] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/ceilometer_policy.json] at time 23:39:48.256951
2018-05-09 23:39:48,257 [salt.state       ][INFO    ][17970] Executing state file.managed for /usr/share/openstack-dashboard/openstack_dashboard/conf/ceilometer_policy.json
2018-05-09 23:39:48,271 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/pike/ceilometer_policy.json'
2018-05-09 23:39:48,273 [salt.state       ][INFO    ][17970] File changed:
New file
2018-05-09 23:39:48,273 [salt.state       ][INFO    ][17970] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/ceilometer_policy.json] at time 23:39:48.273872 duration_in_ms=16.921
2018-05-09 23:39:48,274 [salt.state       ][INFO    ][17970] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/cinder_policy.json] at time 23:39:48.274266
2018-05-09 23:39:48,274 [salt.state       ][INFO    ][17970] Executing state file.managed for /usr/share/openstack-dashboard/openstack_dashboard/conf/cinder_policy.json
2018-05-09 23:39:48,292 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/pike/cinder_policy.json'
2018-05-09 23:39:48,294 [salt.state       ][INFO    ][17970] File changed:
--- 
+++ 
@@ -95,16 +95,16 @@
     "snapshot_extension:snapshot_manage": "rule:admin_api",
     "snapshot_extension:snapshot_unmanage": "rule:admin_api",
 
-    "consistencygroup:create" : "",
-    "consistencygroup:delete": "",
-    "consistencygroup:update": "",
-    "consistencygroup:get": "",
-    "consistencygroup:get_all": "",
+    "consistencygroup:create" : "group:nobody",
+    "consistencygroup:delete": "group:nobody",
+    "consistencygroup:update": "group:nobody",
+    "consistencygroup:get": "group:nobody",
+    "consistencygroup:get_all": "group:nobody",
 
-    "consistencygroup:create_cgsnapshot" : "",
-    "consistencygroup:delete_cgsnapshot": "",
-    "consistencygroup:get_cgsnapshot": "",
-    "consistencygroup:get_all_cgsnapshots": "",
+    "consistencygroup:create_cgsnapshot" : "group:nobody",
+    "consistencygroup:delete_cgsnapshot": "group:nobody",
+    "consistencygroup:get_cgsnapshot": "group:nobody",
+    "consistencygroup:get_all_cgsnapshots": "group:nobody",
 
     "scheduler_extension:scheduler_stats:get_pools" : "rule:admin_api",
     "message:delete": "rule:admin_or_owner",

2018-05-09 23:39:48,295 [salt.state       ][INFO    ][17970] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/cinder_policy.json] at time 23:39:48.295220 duration_in_ms=20.954
2018-05-09 23:39:48,295 [salt.state       ][INFO    ][17970] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/heat_policy.json] at time 23:39:48.295631
2018-05-09 23:39:48,295 [salt.state       ][INFO    ][17970] Executing state file.managed for /usr/share/openstack-dashboard/openstack_dashboard/conf/heat_policy.json
2018-05-09 23:39:48,312 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/pike/heat_policy.json'
2018-05-09 23:39:48,313 [salt.state       ][INFO    ][17970] File /usr/share/openstack-dashboard/openstack_dashboard/conf/heat_policy.json is in the correct state
2018-05-09 23:39:48,313 [salt.state       ][INFO    ][17970] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/heat_policy.json] at time 23:39:48.313478 duration_in_ms=17.847
2018-05-09 23:39:48,314 [salt.state       ][INFO    ][17970] Running state [/usr/share/openstack-dashboard/openstack_dashboard/conf/keystone_policy.json] at time 23:39:48.314143
2018-05-09 23:39:48,314 [salt.state       ][INFO    ][17970] Executing state file.managed for /usr/share/openstack-dashboard/openstack_dashboard/conf/keystone_policy.json
2018-05-09 23:39:48,331 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/policy/pike/keystone_policy.json'
2018-05-09 23:39:48,334 [salt.state       ][INFO    ][17970] File changed:
--- 
+++ 
@@ -28,7 +28,7 @@
     "identity:update_endpoint": "rule:admin_required",
     "identity:delete_endpoint": "rule:admin_required",
 
-    "identity:get_domain": "rule:admin_required or token.project.domain.id:%(target.domain.id)s",
+    "identity:get_domain": "rule:admin_required",
     "identity:list_domains": "rule:admin_required",
     "identity:create_domain": "rule:admin_required",
     "identity:update_domain": "rule:admin_required",
@@ -41,7 +41,7 @@
     "identity:update_project": "rule:admin_required",
     "identity:delete_project": "rule:admin_required",
 
-    "identity:get_user": "rule:admin_or_owner",
+    "identity:get_user": "rule:admin_required",
     "identity:list_users": "rule:admin_required",
     "identity:create_user": "rule:admin_required",
     "identity:update_user": "rule:admin_required",
@@ -173,10 +173,10 @@
     "identity:get_auth_projects": "",
     "identity:get_auth_domains": "",
 
-    "identity:list_projects_for_user": "",
-    "identity:list_domains_for_user": "",
+    "identity:list_projects_for_groups": "",
+    "identity:list_domains_for_groups": "",
 
-    "identity:list_revoke_events": "rule:service_or_admin",
+    "identity:list_revoke_events": "",
 
     "identity:create_policy_association_for_endpoint": "rule:admin_required",
     "identity:check_policy_association_for_endpoint": "rule:admin_required",
@@ -192,7 +192,6 @@
 
     "identity:create_domain_config": "rule:admin_required",
     "identity:get_domain_config": "rule:admin_required",
-    "identity:get_security_compliance_domain_config": "",
     "identity:update_domain_config": "rule:admin_required",
     "identity:delete_domain_config": "rule:admin_required",
     "identity:get_domain_config_default": "rule:admin_required"

2018-05-09 23:39:48,335 [salt.state       ][INFO    ][17970] Completed state [/usr/share/openstack-dashboard/openstack_dashboard/conf/keystone_policy.json] at time 23:39:48.335706 duration_in_ms=21.562
2018-05-09 23:39:48,336 [salt.state       ][INFO    ][17970] Running state [/etc/apache2/ports.conf] at time 23:39:48.336399
2018-05-09 23:39:48,337 [salt.state       ][INFO    ][17970] Executing state file.managed for /etc/apache2/ports.conf
2018-05-09 23:39:48,357 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/ports.conf'
2018-05-09 23:39:48,403 [salt.state       ][INFO    ][17970] File changed:
--- 
+++ 
@@ -1,15 +1,16 @@
+
 # If you just change the port or add more ports here, you will likely also
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
+Listen 0.0.0.0:8078
 
 <IfModule ssl_module>
-	Listen 443
+        Listen 0.0.0.0:443
 </IfModule>
 
 <IfModule mod_gnutls.c>
-	Listen 443
+        Listen 0.0.0.0:443
 </IfModule>
 
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-05-09 23:39:48,404 [salt.state       ][INFO    ][17970] Completed state [/etc/apache2/ports.conf] at time 23:39:48.404102 duration_in_ms=67.702
2018-05-09 23:39:48,404 [salt.state       ][INFO    ][17970] Running state [/etc/apache2/conf-available/openstack-dashboard.conf] at time 23:39:48.404523
2018-05-09 23:39:48,405 [salt.state       ][INFO    ][17970] Executing state file.managed for /etc/apache2/conf-available/openstack-dashboard.conf
2018-05-09 23:39:48,422 [salt.fileclient  ][INFO    ][17970] Fetching file from saltenv 'base', ** done ** 'horizon/files/openstack-dashboard.conf.Debian'
2018-05-09 23:39:48,588 [salt.state       ][INFO    ][17970] File changed:
--- 
+++ 
@@ -1,14 +1,35 @@
-WSGIScriptAlias /horizon /usr/share/openstack-dashboard/openstack_dashboard/wsgi/django.wsgi process-group=horizon
-WSGIDaemonProcess horizon user=horizon group=horizon processes=3 threads=10 display-name=%{GROUP}
-WSGIProcessGroup horizon
 
-Alias /static /var/lib/openstack-dashboard/static/
-Alias /horizon/static /var/lib/openstack-dashboard/static/
 
-<Directory /usr/share/openstack-dashboard/openstack_dashboard/wsgi>
-  Require all granted
-</Directory>
+<VirtualHost 0.0.0.0:8078>
+  ServerName openstack-dashboard
 
-<Directory /var/lib/openstack-dashboard/static>
-  Require all granted
-</Directory>
+  WSGIScriptAlias / /usr/share/openstack-dashboard/openstack_dashboard/wsgi/django.wsgi
+  WSGIDaemonProcess horizon user=horizon group=horizon processes=3 threads=10
+  WSGIProcessGroup horizon
+
+  Alias /static /usr/share/openstack-dashboard/static
+
+  <Directory /usr/share/openstack-dashboard/openstack_dashboard/wsgi>
+    Order allow,deny
+    Allow from all
+  </Directory>
+
+  <Directory /usr/share/openstack-dashboard/static>
+    <IfModule mod_expires.c>
+      ExpiresActive On
+      ExpiresDefault "access 6 month"
+    </IfModule>
+    <IfModule mod_deflate.c>
+      SetOutputFilter DEFLATE
+    </IfModule>
+
+    Require all granted
+  </Directory>
+  ServerSignature Off
+  LogFormat "%h %t %m \"%U%q\" %H %>s %O %D \"%{Referer}i\" \"%{User-Agent}i\"" horizon
+  ErrorLog "/var/log/apache2/openstack_dashboard_error.log"
+  CustomLog "/var/log/apache2/openstack_dashboard_access.log" horizon
+
+</VirtualHost>
+
+

2018-05-09 23:39:48,588 [salt.state       ][INFO    ][17970] Completed state [/etc/apache2/conf-available/openstack-dashboard.conf] at time 23:39:48.588335 duration_in_ms=183.812
2018-05-09 23:39:48,592 [salt.state       ][INFO    ][17970] Running state [wsgi] at time 23:39:48.592574
2018-05-09 23:39:48,592 [salt.state       ][INFO    ][17970] Executing state apache_module.enabled for wsgi
2018-05-09 23:39:48,593 [salt.state       ][INFO    ][17970] wsgi already enabled.
2018-05-09 23:39:48,593 [salt.state       ][INFO    ][17970] Completed state [wsgi] at time 23:39:48.593270 duration_in_ms=0.696
2018-05-09 23:39:48,594 [salt.state       ][INFO    ][17970] Running state [openstack-dashboard] at time 23:39:48.594474
2018-05-09 23:39:48,595 [salt.state       ][INFO    ][17970] Executing state apache_conf.enabled for openstack-dashboard
2018-05-09 23:39:48,595 [salt.state       ][INFO    ][17970] openstack-dashboard already enabled.
2018-05-09 23:39:48,595 [salt.state       ][INFO    ][17970] Completed state [openstack-dashboard] at time 23:39:48.595724 duration_in_ms=1.25
2018-05-09 23:39:48,995 [salt.state       ][INFO    ][17970] Running state [/var/log/horizon] at time 23:39:48.995570
2018-05-09 23:39:48,996 [salt.state       ][INFO    ][17970] Executing state file.directory for /var/log/horizon
2018-05-09 23:39:48,999 [salt.state       ][INFO    ][17970] {'/var/log/horizon': 'New Dir'}
2018-05-09 23:39:49,000 [salt.state       ][INFO    ][17970] Completed state [/var/log/horizon] at time 23:39:49.000708 duration_in_ms=5.14
2018-05-09 23:39:49,001 [salt.state       ][INFO    ][17970] Running state [/var/log/horizon/horizon.log] at time 23:39:49.001290
2018-05-09 23:39:49,001 [salt.state       ][INFO    ][17970] Executing state file.managed for /var/log/horizon/horizon.log
2018-05-09 23:39:49,002 [salt.loaded.int.states.file][WARNING ][17970] State for file: /var/log/horizon/horizon.log - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-05-09 23:39:49,003 [salt.state       ][INFO    ][17970] {'new': 'file /var/log/horizon/horizon.log created', 'group': 'adm', 'mode': '0640', 'user': 'horizon'}
2018-05-09 23:39:49,004 [salt.state       ][INFO    ][17970] Completed state [/var/log/horizon/horizon.log] at time 23:39:49.004068 duration_in_ms=2.778
2018-05-09 23:39:49,005 [salt.state       ][INFO    ][17970] Running state [apache2] at time 23:39:49.005097
2018-05-09 23:39:49,005 [salt.state       ][INFO    ][17970] Executing state service.running for apache2
2018-05-09 23:39:49,010 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-05-09 23:39:49,029 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:39:49,052 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:39:49,072 [salt.state       ][INFO    ][17970] The service apache2 is already running
2018-05-09 23:39:49,072 [salt.state       ][INFO    ][17970] Completed state [apache2] at time 23:39:49.072535 duration_in_ms=67.438
2018-05-09 23:39:49,073 [salt.state       ][INFO    ][17970] Running state [apache2] at time 23:39:49.072973
2018-05-09 23:39:49,073 [salt.state       ][INFO    ][17970] Executing state service.mod_watch for apache2
2018-05-09 23:39:49,075 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-05-09 23:39:49,089 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:39:49,112 [salt.loaded.int.module.cmdmod][INFO    ][17970] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-05-09 23:39:55,892 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509233955907379
2018-05-09 23:39:55,914 [salt.minion      ][INFO    ][19648] Starting a new job with PID 19648
2018-05-09 23:39:55,949 [salt.minion      ][INFO    ][19648] Returning information for job: 20180509233955907379
2018-05-09 23:39:57,443 [salt.state       ][INFO    ][17970] {'apache2': True}
2018-05-09 23:39:57,444 [salt.state       ][INFO    ][17970] Completed state [apache2] at time 23:39:57.444775 duration_in_ms=8371.801
2018-05-09 23:39:57,448 [salt.minion      ][INFO    ][17970] Returning information for job: 20180509233825479195
2018-05-09 23:39:58,243 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command file.symlink with jid 20180509233958261009
2018-05-09 23:39:58,256 [salt.minion      ][INFO    ][20011] Starting a new job with PID 20011
2018-05-09 23:39:58,288 [salt.minion      ][INFO    ][20011] Returning information for job: 20180509233958261009
2018-05-09 23:39:59,018 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command cmd.run with jid 20180509233959036261
2018-05-09 23:39:59,039 [salt.minion      ][INFO    ][20040] Starting a new job with PID 20040
2018-05-09 23:39:59,047 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][20040] Executing command '/usr/share/openstack-dashboard/manage.py collectstatic --noinput' in directory '/root'
2018-05-09 23:40:02,203 [salt.minion      ][INFO    ][20040] Returning information for job: 20180509233959036261
2018-05-09 23:40:02,925 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command cmd.run with jid 20180509234002941589
2018-05-09 23:40:02,945 [salt.minion      ][INFO    ][20053] Starting a new job with PID 20053
2018-05-09 23:40:02,953 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][20053] Executing command '/usr/share/openstack-dashboard/manage.py compress --force' in directory '/root'
2018-05-09 23:40:12,957 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509234012974672
2018-05-09 23:40:12,980 [salt.minion      ][INFO    ][20066] Starting a new job with PID 20066
2018-05-09 23:40:13,005 [salt.minion      ][INFO    ][20066] Returning information for job: 20180509234012974672
2018-05-09 23:40:23,187 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509234023201418
2018-05-09 23:40:23,213 [salt.minion      ][INFO    ][20098] Starting a new job with PID 20098
2018-05-09 23:40:23,239 [salt.minion      ][INFO    ][20098] Returning information for job: 20180509234023201418
2018-05-09 23:40:33,199 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509234033217188
2018-05-09 23:40:33,221 [salt.minion      ][INFO    ][20116] Starting a new job with PID 20116
2018-05-09 23:40:33,243 [salt.minion      ][INFO    ][20116] Returning information for job: 20180509234033217188
2018-05-09 23:40:43,430 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509234043440835
2018-05-09 23:40:43,452 [salt.minion      ][INFO    ][20138] Starting a new job with PID 20138
2018-05-09 23:40:43,473 [salt.minion      ][INFO    ][20138] Returning information for job: 20180509234043440835
2018-05-09 23:40:48,585 [salt.minion      ][INFO    ][20053] Returning information for job: 20180509234002941589
2018-05-09 23:40:49,402 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command file.append with jid 20180509234049413659
2018-05-09 23:40:49,426 [salt.minion      ][INFO    ][20147] Starting a new job with PID 20147
2018-05-09 23:40:49,449 [salt.minion      ][INFO    ][20147] Returning information for job: 20180509234049413659
2018-05-09 23:40:50,225 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command service.reload with jid 20180509234050241962
2018-05-09 23:40:50,240 [salt.minion      ][INFO    ][20152] Starting a new job with PID 20152
2018-05-09 23:40:51,491 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][20152] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-05-09 23:40:51,509 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][20152] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-05-09 23:40:51,539 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][20152] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-05-09 23:40:51,768 [salt.minion      ][INFO    ][20152] Returning information for job: 20180509234050241962
2018-05-09 23:40:55,781 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command cmd.run with jid 20180509234055798378
2018-05-09 23:40:55,796 [salt.minion      ][INFO    ][20503] Starting a new job with PID 20503
2018-05-09 23:40:55,808 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][20503] Executing command '. /root/keystonercv3;   openstack compute service list;   openstack network agent list;   openstack stack list;   openstack volume service list' in directory '/root'
2018-05-09 23:41:05,888 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509234105901576
2018-05-09 23:41:05,921 [salt.minion      ][INFO    ][20599] Starting a new job with PID 20599
2018-05-09 23:41:05,942 [salt.minion      ][INFO    ][20599] Returning information for job: 20180509234105901576
2018-05-09 23:41:15,946 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command saltutil.find_job with jid 20180509234115932981
2018-05-09 23:41:15,983 [salt.minion      ][INFO    ][20630] Starting a new job with PID 20630
2018-05-09 23:41:16,005 [salt.minion      ][INFO    ][20630] Returning information for job: 20180509234115932981
2018-05-09 23:41:23,873 [salt.minion      ][INFO    ][20503] Returning information for job: 20180509234055798378
2018-05-09 23:41:24,612 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command cmd.run with jid 20180509234124625149
2018-05-09 23:41:24,631 [salt.minion      ][INFO    ][20663] Starting a new job with PID 20663
2018-05-09 23:41:24,638 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][20663] Executing command '. /root/keystonercv3;   openstack network create --external --default --provider-network-type flat   --provider-physical-network physnet1 floating_net' in directory '/root'
2018-05-09 23:41:29,776 [salt.minion      ][INFO    ][20663] Returning information for job: 20180509234124625149
2018-05-09 23:41:30,561 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command cmd.run with jid 20180509234130574402
2018-05-09 23:41:30,579 [salt.minion      ][INFO    ][20687] Starting a new job with PID 20687
2018-05-09 23:41:30,585 [salt.loader.192.168.11.2.int.module.cmdmod][INFO    ][20687] Executing command '. /root/keystonercv3;   openstack subnet create --gateway 10.16.0.1 --no-dhcp   --allocation-pool start=10.16.0.113,end=10.16.0.253   --network floating_net --subnet-range 10.16.0.0/24 floating_subnet' in directory '/root'
2018-05-09 23:41:35,920 [salt.minion      ][INFO    ][20687] Returning information for job: 20180509234130574402
2018-05-09 23:41:36,986 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command cp.push_dir with jid 20180509234136994052
2018-05-09 23:41:37,005 [salt.minion      ][INFO    ][20711] Starting a new job with PID 20711
2018-05-09 23:41:38,737 [salt.minion      ][INFO    ][20711] Returning information for job: 20180509234136994052
2018-05-09 23:41:54,852 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command pillar.get with jid 20180509234154861719
2018-05-09 23:41:54,879 [salt.minion      ][INFO    ][20869] Starting a new job with PID 20869
2018-05-09 23:41:54,889 [salt.minion      ][INFO    ][20869] Returning information for job: 20180509234154861719
2018-05-10 00:16:43,769 [salt.utils.schedule][INFO    ][1716] Running scheduled job: __mine_interval
2018-05-10 01:16:43,769 [salt.utils.schedule][INFO    ][1716] Running scheduled job: __mine_interval
2018-05-10 01:51:15,919 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command pillar.get with jid 20180510015115905762
2018-05-10 01:51:15,948 [salt.minion      ][INFO    ][22833] Starting a new job with PID 22833
2018-05-10 01:51:15,961 [salt.minion      ][INFO    ][22833] Returning information for job: 20180510015115905762
2018-05-10 01:53:10,132 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command grains.get with jid 20180510015310115039
2018-05-10 01:53:10,157 [salt.minion      ][INFO    ][22934] Starting a new job with PID 22934
2018-05-10 01:53:10,169 [salt.minion      ][INFO    ][22934] Returning information for job: 20180510015310115039
2018-05-10 02:16:43,769 [salt.utils.schedule][INFO    ][1716] Running scheduled job: __mine_interval
2018-05-10 03:16:43,769 [salt.utils.schedule][INFO    ][1716] Running scheduled job: __mine_interval
2018-05-10 04:00:48,592 [salt.minion      ][INFO    ][1716] User sudo_ubuntu Executing command cp.push_dir with jid 20180510040048569149
2018-05-10 04:00:48,621 [salt.minion      ][INFO    ][24608] Starting a new job with PID 24608
