Google, Inc. Serial Graphics Adapter 12/07/13 SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (buildd@allspice) Sat Dec 7 23:13:17 UTC 2013 4 0  SeaBIOS (version 1.7.4-20150827_223223-lgw01-56) M a c h i n e  U U I D  4 6 2 1 f 7 0 0 - 0 7 4 f - 4 c 1 2 - b 1 0 b - b 7 f b d 5 f 8 7 9 0 e      iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+DFFC2250+DFF02250 CA00  Press Ctrl-B to configure iPXE (PCI 00:03.0)...                                                                                       Booting from Hard Disk...  text is deprecated. Use set gfxpayload=vga=normal before linux command instead. text is deprecated. Use set gfxpayload=vga=normal before linux command  instead.  text is deprecated. Use set gfxpayload=vga=normal before linux command instead. text is deprecated. Use set gfxpayload=vga=normal before linux command  instead.  [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-112-generic (buildd@lcy01-02) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #159-Ubuntu SMP Fri Mar 3 15:26:07 UTC 2017 (Ubuntu 3.13.0-112.159-generic 3.13.11-ckt39) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-112-generic root=LABEL=cloudimg-rootfs ro nofb nomodeset vga=normal console=tty0 console=ttyS0,115200 no_timer_check nofb nomodeset vga=normal [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] Hypervisor detected: KVM [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] PAT not supported by CPU. [ 0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f1a90-0x000f1a9f] mapped at [ffff8800000f1a90] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff] [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21fdfffff] [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] RAMDISK: [mem 0x35a60000-0x36d27fff] [ 0.000000] ACPI: RSDP 00000000000f18e0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 00000000dfffe3f0 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 00000000dfffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 00000000dfffe430 001137 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 00000000dfffff40 000040 [ 0.000000] ACPI: SSDT 00000000dffff6a0 000899 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 00000000dffff5b0 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 00000000dffff570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fffffff] [ 0.000000] NODE_DATA [mem 0x21fff5000-0x21fff9fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 2:1fff1001, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x21fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdfffdfff] [ 0.000000] node 0: [mem 0x100000000-0x21fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021fc00000 s81536 r8192 d20864 u1048576 [ 0.000000] kvm-clock: cpu 0, msr 2:1fff1001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 21fc0d000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064263 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-112-generic root=LABEL=cloudimg-rootfs ro nofb nomodeset vga=normal console=tty0 console=ttyS0,115200 no_timer_check nofb nomodeset vga=normal [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 8154952K/8388208K available (7432K kernel code, 1147K rwdata, 3424K rodata, 1340K init, 1448K bss, 233256K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-1. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Detected 2294.702 MHz processor [ 0.012000] Calibrating delay loop (skipped) preset value.. 4589.40 BogoMIPS (lpj=9178808) [ 0.016035] pid_max: default: 32768 minimum: 301 [ 0.020079] Security Framework initialized [ 0.024061] AppArmor: AppArmor initialized [ 0.028056] Yama: becoming mindful. [ 0.037010] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.046320] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.049530] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.052032] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.056198] Initializing cgroup subsys memory [ 0.060035] Initializing cgroup subsys devices [ 0.064035] Initializing cgroup subsys freezer [ 0.068036] Initializing cgroup subsys blkio [ 0.072034] Initializing cgroup subsys perf_event [ 0.076035] Initializing cgroup subsys hugetlb [ 0.081642] mce: CPU supports 10 MCE banks [ 0.088827] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.088827] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.088827] tlb_flushall_shift: 6 [ 0.098417] Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000) [ 0.233839] ACPI: Core revision 20131115 [ 0.236674] ACPI: All ACPI Tables successfully acquired [ 0.248195] ftrace: allocating 28674 entries in 113 pages [ 0.275934] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.276003] smpboot: CPU0: Intel QEMU Virtual CPU version 1.0 (fam: 06, model: 02, stepping: 03) [ 0.296000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only. [ 0.308962] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.312480] x86: Booting SMP configuration: [ 0.316002] .... node #0, CPUs: #1[ 0.308940] kvm-clock: cpu 1, msr 2:1fff1041, secondary cpu clock [ 0.352113] x86: Booted up 1 node, 2 CPUs [ 0.352074] KVM setup async PF for cpu 1 [ 0.352074] kvm-stealtime: cpu 1, msr 21fd0d000 [ 0.356004] smpboot: Total of 2 processors activated (9178.80 BogoMIPS) [ 0.369144] devtmpfs: initialized [ 0.376653] EVM: security.selinux [ 0.380002] EVM: security.SMACK64 [ 0.384002] EVM: security.ima [ 0.388003] EVM: security.capability [ 0.392784] pinctrl core: initialized pinctrl subsystem [ 0.396128] regulator-dummy: no parameters [ 0.400551] RTC time: 11:24:14, date: 03/13/17 [ 0.404035] NET: Registered protocol family 16 [ 0.408117] cpuidle: using governor ladder [ 0.412003] cpuidle: using governor menu [ 0.416544] ACPI: bus type PCI registered [ 0.420003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.424653] PCI: Using configuration type 1 for base access [ 0.432225] bio: create slab at 0 [ 0.436143] ACPI: Added _OSI(Module Device) [ 0.440003] ACPI: Added _OSI(Processor Device) [ 0.444002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.448002] ACPI: Added _OSI(Processor Aggregator Device) [ 0.458660] ACPI: Interpreter enabled [ 0.460006] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.472004] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.484011] ACPI: (supports S0 S3 S4 S5) [ 0.488002] ACPI: Using IOAPIC for interrupt routing [ 0.492041] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.496210] ACPI: No dock devices found. [ 0.506403] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.508008] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.512007] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.516063] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.520463] acpiphp: Slot [3] registered [ 0.524088] acpiphp: Slot [4] registered [ 0.528077] acpiphp: Slot [5] registered [ 0.532073] acpiphp: Slot [6] registered [ 0.536082] acpiphp: Slot [7] registered [ 0.540072] acpiphp: Slot [8] registered [ 0.544073] acpiphp: Slot [9] registered [ 0.548087] acpiphp: Slot [10] registered [ 0.556014] acpiphp: Slot [11] registered [ 0.560091] acpiphp: Slot [12] registered [ 0.564074] acpiphp: Slot [13] registered [ 0.568081] acpiphp: Slot [14] registered [ 0.572073] acpiphp: Slot [15] registered [ 0.576070] acpiphp: Slot [16] registered [ 0.580072] acpiphp: Slot [17] registered [ 0.584070] acpiphp: Slot [18] registered [ 0.588069] acpiphp: Slot [19] registered [ 0.592078] acpiphp: Slot [20] registered [ 0.596068] acpiphp: Slot [21] registered [ 0.600070] acpiphp: Slot [22] registered [ 0.604072] acpiphp: Slot [23] registered [ 0.608088] acpiphp: Slot [24] registered [ 0.612072] acpiphp: Slot [25] registered [ 0.616083] acpiphp: Slot [26] registered [ 0.620071] acpiphp: Slot [27] registered [ 0.624087] acpiphp: Slot [28] registered [ 0.628070] acpiphp: Slot [29] registered [ 0.632068] acpiphp: Slot [30] registered [ 0.636074] acpiphp: Slot [31] registered [ 0.640062] PCI host bridge to bus 0000:00 [ 0.644004] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.648005] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.652003] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.656003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.660003] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff] [ 0.688926] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.692074] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.753781] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.767133] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.776311] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.791374] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.800143] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.813613] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.816382] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.820000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.836003] vgaarb: loaded [ 0.844002] vgaarb: bridge control possible 0000:00:02.0 [ 0.852315] SCSI subsystem initialized [ 0.856315] ACPI: bus type USB registered [ 0.864072] usbcore: registered new interface driver usbfs [ 0.872013] usbcore: registered new interface driver hub [ 0.880048] usbcore: registered new device driver usb [ 0.888132] PCI: Using ACPI for IRQ routing [ 0.896966] NetLabel: Initializing [ 0.904002] NetLabel: domain hash size = 128 [ 0.908001] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.916017] NetLabel: unlabeled traffic allowed by default [ 0.928136] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.936097] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.946994] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.960109] Switched to clocksource kvm-clock [ 0.972810] AppArmor: AppArmor Filesystem Enabled [ 0.981861] pnp: PnP ACPI init [ 0.987419] ACPI: bus type PNP registered [ 0.995586] pnp: PnP ACPI: found 7 devices [ 1.001982] ACPI: bus type PNP unregistered [ 1.014406] NET: Registered protocol family 2 [ 1.021580] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.034337] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.043596] TCP: Hash tables configured (established 65536 bind 65536) [ 1.052606] TCP: reno registered [ 1.059122] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.068178] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.078123] NET: Registered protocol family 1 [ 1.084795] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.093142] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.101089] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.109866] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.119582] Trying to unpack rootfs image as initramfs... [ 1.402518] Freeing initrd memory: 19232K (ffff880035a60000 - ffff880036d28000) [ 1.415204] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.424085] software IO TLB [mem 0xdbffe000-0xdfffe000] (64MB) mapped at [ffff8800dbffe000-ffff8800dfffdfff] [ 1.449262] microcode: CPU0 sig=0x623, pf=0x0, revision=0x1 [ 1.459923] microcode: CPU1 sig=0x623, pf=0x0, revision=0x1 [ 1.474140] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.490877] Scanning for low memory corruption every 60 seconds [ 1.503137] Initialise system trusted keyring [ 1.512361] audit: initializing netlink socket (disabled) [ 1.522687] type=2000 audit(1489404253.255:1): initialized [ 1.569032] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.580739] zbud: loaded [ 1.586680] VFS: Disk quotas dquot_6.5.2 [ 1.593431] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.602923] fuse init (API version 7.22) [ 1.610050] msgmni has been set to 15965 [ 1.617509] Key type big_key registered [ 1.629625] Key type asymmetric registered [ 1.636760] Asymmetric key parser 'x509' registered [ 1.644525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.656528] io scheduler noop registered [ 1.663155] io scheduler deadline registered (default) [ 1.670986] io scheduler cfq registered [ 1.678031] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.686589] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.696811] ipmi message handler version 39.2 [ 1.704162] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.716955] ACPI: Power Button [PWRF] [ 1.724174] GHES: HEST is not enabled! [ 1.732167] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 1.743033] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 1.754603] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.809905] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.858701] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.871358] Linux agpgart interface v0.103 [ 1.879044] brd: module loaded [ 1.885422] loop: module loaded [ 1.893489] blk-mq: CPU -> queue map [ 1.899765] CPU 0 -> Queue 0 [ 1.905846] CPU 1 -> Queue 0 [ 1.913187] vda: vda1 vda2 [ 1.923251] scsi0 : ata_piix [ 1.929441] scsi1 : ata_piix [ 1.935437] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc180 irq 14 [ 1.944924] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc188 irq 15 [ 1.956495] libphy: Fixed MDIO Bus: probed [ 1.965308] tun: Universal TUN/TAP device driver, 1.6 [ 1.973089] tun: (C) 1999-2004 Max Krasnyansky [ 1.982278] PPP generic driver version 2.4.2 [ 1.989733] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.998803] ehci-pci: EHCI PCI platform driver [ 2.006018] ehci-platform: EHCI generic platform driver [ 2.014345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.023178] ohci-pci: OHCI PCI platform driver [ 2.030561] ohci-platform: OHCI generic platform driver [ 2.038765] uhci_hcd: USB Universal Host Controller Interface driver [ 2.049443] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 2.058135] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 2.070862] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c140 [ 2.079967] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.090319] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.102620] usb usb1: Product: UHCI Host Controller [ 2.110615] usb usb1: Manufacturer: Linux 3.13.0-112-generic uhci_hcd [ 2.121418] usb usb1: SerialNumber: 0000:00:01.2 [ 2.129464] hub 1-0:1.0: USB hub found [ 2.136251] hub 1-0:1.0: 2 ports detected [ 2.143639] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.160524] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.168448] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.176317] mousedev: PS/2 mouse device common for all mice [ 2.185635] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.198968] rtc_cmos 00:00: RTC can wake from S4 [ 2.208373] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 2.219532] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 2.241773] device-mapper: uevent: version 1.0.3 [ 2.267450] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.289686] ledtrig-cpu: registered to indicate activity on CPUs [ 2.302739] TCP: cubic registered [ 2.311957] NET: Registered protocol family 10 [ 2.319416] NET: Registered protocol family 17 [ 2.327112] Key type dns_resolver registered [ 2.335020] Loading compiled-in X.509 certificates [ 2.343101] Loaded X.509 cert 'Magrathea: Glacier signing key: f50a65a6eee1644cbc1c2ef17b37cf4f6d2b2119' [ 2.356263] registered taskstats version 1 [ 2.369186] Key type trusted registered [ 2.383791] Key type encrypted registered [ 2.390632] AppArmor: AppArmor sha1 policy hashing enabled [ 2.398472] IMA: No TPM chip found, activating TPM-bypass! [ 2.407107] regulator-dummy: disabling [ 2.413532] Magic number: 9:497:428 [ 2.420395] rtc_cmos 00:00: setting system clock to 2017-03-13 11:24:16 UTC (1489404256) [ 2.432906] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.441723] EDD information not available. [ 2.451518] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000) [ 2.464119] Write protecting the kernel read-only data: 12288k [ 2.473603] Freeing unused kernel memory: 748K (ffff880001745000 - ffff880001800000) [ 2.487927] Freeing unused kernel memory: 672K (ffff880001b58000 - ffff880001c00000) Loading, please wait... [ 2.532309] systemd-udevd[103]: starting version 204 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [ 2.601742] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.660571] FDC 0 is a S82078B [ 2.662599] 8139cp 0000:00:03.0 eth0: RTL-8139C+ at 0xffffc90000e18000, 52:54:00:35:20:88, IRQ 11 [ 2.687525] 8139too: 8139too Fast Ethernet driver 0.9.28 Begin: Running /scripts/local-premount ... done. [ 3.598742] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. [ 3.687883] random: init urandom read with 13 bits of entropy available [ 3.725844] init: plymouth-upstart-bridge main process (152) terminated with status 1 [ 3.738449] init: plymouth-upstart-bridge main process ended, respawning [ 3.762749] init: plymouth-upstart-bridge main process (161) terminated with status 1 [ 3.788162] init: plymouth-upstart-bridge main process ended, respawning [ 3.824746] init: plymouth-upstart-bridge main process (165) terminated with status 1 [ 3.843166] init: plymouth-upstart-bridge main process ended, respawning * Stopping Send an event to indicate plymouth is up[ OK ] * Starting Mount filesystems on boot[ OK ] * Stopping Track if upstart is running in a container[ OK ] * Starting Signal sysvinit that virtual filesystems are mounted[ OK ] * Starting Signal sysvinit that virtual filesystems are mounted[ OK ] * Starting Bridge udev events into upstart[ OK ] * Starting device node and kernel event manager[ OK ] * Starting Signal sysvinit that remote filesystems are mounted[ OK ] * Starting load modules from /etc/modules[ OK ] * Starting log initial device creation[ OK ] * Stopping load modules from /etc/modules[ OK ] * Starting Signal sysvinit that the rootfs is mounted[ OK ] * Starting Clean /tmp directory[ OK ] * Stopping Clean /tmp directory[ OK ] + set -o pipefail ++ df -P / ++ awk '/.*/ { print $1 }' ++ tail -n 1 * Starting Signal sysvinit that local filesystems are mounted[ OK ] + root_dev=/dev/vda1 + '[' -z /dev/vda1 ']' ++ udevadm info --query=all --name /dev/vda1 + udev_root='P: /devices/pci0000:00/0000:00:06.0/virtio0/block/vda/vda1 N: vda1 S: disk/by-label/cloudimg-rootfs S: disk/by-uuid/1ecb43f4-7ecf-4552-80bb-b9f7d0260af4 E: DEVLINKS=/dev/disk/by-label/cloudimg-rootfs /dev/disk/by-uuid/1ecb43f4-7ecf-4552-80bb-b9f7d0260af4 E: DEVNAME=/dev/vda1 E: DEVPATH=/devices/pci0000:00/0000:00:06.0/virtio0/block/vda/vda1 E: DEVTYPE=partition E: ID_FS_LABEL=cloudimg-rootfs E: ID_FS_LABEL_ENC=cloudimg-rootfs E: ID_FS_TYPE=ext4 E: ID_FS_USAGE=filesystem E: ID_FS_UUID=1ecb43f4-7ecf-4552-80bb-b9f7d0260af4 E: ID_FS_UUID_ENC=1ecb43f4-7ecf-4552-80bb-b9f7d0260af4 E: ID_FS_VERSION=1.0 E: ID_PART_ENTRY_DISK=253:0 E: ID_PART_ENTRY_FLAGS=0x80 E: ID_PART_ENTRY_NUMBER=1 E: ID_PART_ENTRY_OFFSET=2048 E: ID_PART_ENTRY_SCHEME=dos E: ID_PART_ENTRY_SIZE=3168640 E: ID_PART_ENTRY_TYPE=0x83 E: ID_PART_TABLE_TYPE=dos E: MAJOR=253 E: MINOR=1 E: SUBSYSTEM=block E: USEC_INITIALIZED=51298' ++ cut -d= -f2 ++ grep ID_PART_ENTRY_DISK + part=253:0 + '[' -z 253:0 ']' ++ grep ID_PART_ENTRY_NUMBER ++ cut -d= -f2 + part_no=1 + '[' -z 1 ']' ++ find /sys/dev/block -name 253:0 + disk=/sys/dev/block/253:0 ++ source /sys/dev/block/253:0/uevent +++ MAJOR=253 +++ MINOR=0 +++ DEVNAME=vda +++ DEVTYPE=disk ++ echo vda + disk=/dev/vda + set +e + growpart /dev/vda 1 * Starting flush early job output to logs[ OK ] * Stopping flush early job output to logs[ OK ] * Stopping Mount filesystems on boot[ OK ] * Starting system logging daemon[ OK ] CHANGED: partition=1 start=2048 old: size=3168640 end=3170688 new: size=64878592,end=64880640 + '[' 0 -le 1 ']' + resize2fs /dev/vda1 resize2fs 1.42.9 (4-Feb-2014) Filesystem at /dev/vda1 is mounted on /; on-line resizing required old_desc_blocks = 1, new_desc_blocks = 2 The filesystem on /dev/vda1 is now 8109824 blocks long. * Starting Growing root partition[ OK ] * Starting configure network device used by iSCSI root[ OK ] * Starting configure network device security[ OK ] * Starting configure network device[ OK ] * Starting Bridge file events into upstart[ OK ] * Stopping cold plug devices[ OK ] * Stopping log initial device creation[ OK ] /dev/vda2: LABEL="config-2" TYPE="iso9660" * Starting Run glean to configure network interfaces[ OK ] * Starting configure network device security[ OK ] * Starting save udev log and update rules[ OK ] * Starting Send an event to indicate plymouth is up[ OK ] * Stopping save udev log and update rules[ OK ] mount: block device /dev/vda2 is write-protected, mounting read-only * Starting configure network device security[ OK ] * Stopping Send an event to indicate plymouth is up[ OK ] * Starting Mount network filesystems[ OK ] * Starting Failsafe Boot Delay[ OK ] * Stopping Mount network filesystems[ OK ] * Starting Bridge socket events into upstart[ OK ] * Stopping Failsafe Boot Delay[ OK ] * Starting System V initialisation compatibility[ OK ] * Starting configure network device[ OK ] * Stopping Run glean to configure network interfaces[ OK ] * Starting Mount network filesystems[ OK ] * Starting create bridge for infra cloud[ OK ] * Stopping Mount network filesystems[ OK ] * Starting configure virtual network devices[ OK ] ifdown: interface 52:54:00:35:20:88 not configured * Starting iSCSI initiator service iscsid  [ OK ] interface 52:54:00:35:20:88 does not exist! Waiting for br_opnfv to get ready (MAXWAIT is 32 seconds). iscsiadm: No records found * Starting configure network device security[ OK ] * Setting up iSCSI targets  [ OK ] * Mounting network filesystems  [ OK ] + for key in dsa ecdsa ed25519 rsa + FILE=/etc/ssh/ssh_host_dsa_key + '[' -f /etc/ssh/ssh_host_dsa_key ']' + /usr/bin/yes n + /usr/bin/ssh-keygen -f /etc/ssh/ssh_host_dsa_key -N '' -t dsa Generating public/private dsa key pair. * Stopping System V initialisation compatibility[ OK ] * Starting System V runlevel compatibility[ OK ] * Starting save kernel messages[ OK ] * Starting OpenSSH Server Key Generation[ OK ] * Stopping save kernel messages[ OK ] puppet not configured to start, please edit /etc/default/puppet to enable RTNETLINK answers: File exists Failed to bring up br_opnfv. * Stopping create bridge for infra cloud[ OK ] * Starting puppet agent  [ OK ] Your identification has been saved in /etc/ssh/ssh_host_dsa_key. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: 96:79:cf:86:f2:4f:9b:a2:36:6c:0e:49:ac:9c:63:5b root@controller00.opnfvlocal The key's randomart image is: +--[ DSA 1024]----+ | | | | | | | . o | | o S . | | . + o . + | | * E.. . = | | . + .=o.o o | | . +oo.o+ | +-----------------+ + for key in dsa ecdsa ed25519 rsa + FILE=/etc/ssh/ssh_host_ecdsa_key + '[' -f /etc/ssh/ssh_host_ecdsa_key ']' + /usr/bin/yes n + /usr/bin/ssh-keygen -f /etc/ssh/ssh_host_ecdsa_key -N '' -t ecdsa Generating public/private ecdsa key pair. Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key. Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub. The key fingerprint is: eb:c5:1e:ff:60:26:1c:d7:d5:d5:06:43:88:c8:b2:32 root@controller00.opnfvlocal The key's randomart image is: +--[ECDSA 256]---+ | . . . o+.o| | . o . . .=| | o .o| | E . . . | | o S . . . | | + o | | . * + | | . o * . | | . . ... | +-----------------+ + for key in dsa ecdsa ed25519 rsa + FILE=/etc/ssh/ssh_host_ed25519_key + '[' -f /etc/ssh/ssh_host_ed25519_key ']' + /usr/bin/yes n + /usr/bin/ssh-keygen -f /etc/ssh/ssh_host_ed25519_key -N '' -t ed25519 Generating public/private ed25519 key pair. Your identification has been saved in /etc/ssh/ssh_host_ed25519_key. Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub. The key fingerprint is: ec:78:16:16:35:2d:9a:b6:68:8b:5e:ef:0b:4f:f6:9f root@controller00.opnfvlocal The key's randomart image is: +--[ED25519 256--+ | o. | | .... | | .o . | | .+. | | oS. | | o+.. | | o+.* | | ...O . . | | .. .=...E | +-----------------+ + for key in dsa ecdsa ed25519 rsa + FILE=/etc/ssh/ssh_host_rsa_key + '[' -f /etc/ssh/ssh_host_rsa_key ']' + /usr/bin/ssh-keygen -f /etc/ssh/ssh_host_rsa_key -N '' -t rsa Generating public/private rsa key pair. + /usr/bin/yes n * Stopping System V runlevel compatibility[ OK ] * Starting configure network device[ OK ] Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: 39:92:b3:56:b7:bf:bc:73:65:fb:6c:2f:07:d5:97:58 root@controller00.opnfvlocal The key's randomart image is: +--[ RSA 2048]----+ | | | E | | o o| | . . . .+| | + S . ..| | = o . . o| | o . +.| | . o. ooo| | == +*| +-----------------+