4. Installation Guide (Bare Metal Deployment)

4.1. Nodes Configuration (Bare Metal Deployment)

The below file is the inventory template of deployment nodes:

“compass4nfv/deploy/conf/hardware_environment/huawei-pod1/dha.yml”

You can write your own IPMI IP/User/Password/Mac address/roles reference to it.

  • name – Host name for deployment node after installation.
  • ipmiVer – IPMI interface version for deployment node support. IPMI 1.0 or IPMI 2.0 is available.
  • ipmiIP – IPMI IP address for deployment node. Make sure it can access from Jumphost.
  • ipmiUser – IPMI Username for deployment node.
  • ipmiPass – IPMI Password for deployment node.
  • mac – MAC Address of deployment node PXE NIC .
  • roles – Components deployed.

Set TYPE/FLAVOR and POWER TOOL

E.g. .. code-block:: yaml

TYPE: baremetal FLAVOR: cluster POWER_TOOL: ipmitool

Set ipmiUser/ipmiPass and ipmiVer

E.g.

ipmiUser: USER
ipmiPass: PASSWORD
ipmiVer: '2.0'

E.g. Openstack only deployment roles setting

hosts:
  - name: host1
    mac: 'F8:4A:BF:55:A2:8D'
    interfaces:
       - eth1: 'F8:4A:BF:55:A2:8E'
    ipmiIp: 172.16.130.26
    roles:
      - controller
      - ha

  - name: host2
    mac: 'D8:49:0B:DA:5A:B7'
    interfaces:
      - eth1: 'D8:49:0B:DA:5A:B8'
    ipmiIp: 172.16.130.27
    roles:
      - compute

NOTE: IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE ‘ha’ role MUST BE SELECT, TOO.

E.g. Openstack and ceph deployment roles setting

hosts:
  - name: host1
    mac: 'F8:4A:BF:55:A2:8D'
    interfaces:
       - eth1: 'F8:4A:BF:55:A2:8E'
    ipmiIp: 172.16.130.26
    roles:
      - controller
      - ha
      - ceph-adm
      - ceph-mon

  - name: host2
    mac: 'D8:49:0B:DA:5A:B7'
    interfaces:
      - eth1: 'D8:49:0B:DA:5A:B8'
    ipmiIp: 172.16.130.27
    roles:
      - compute
      - ceph-osd

E.g. Openstack and ODL deployment roles setting

hosts:
  - name: host1
    mac: 'F8:4A:BF:55:A2:8D'
    interfaces:
       - eth1: 'F8:4A:BF:55:A2:8E'
    ipmiIp: 172.16.130.26
    roles:
      - controller
      - ha
      - odl

  - name: host2
    mac: 'D8:49:0B:DA:5A:B7'
    interfaces:
      - eth1: 'D8:49:0B:DA:5A:B8'
    ipmiIp: 172.16.130.27
    roles:
      - compute

E.g. Openstack and ONOS deployment roles setting

hosts:
  - name: host1
    mac: 'F8:4A:BF:55:A2:8D'
    interfaces:
       - eth1: 'F8:4A:BF:55:A2:8E'
    ipmiIp: 172.16.130.26
    roles:
      - controller
      - ha
      - onos

  - name: host2
    mac: 'D8:49:0B:DA:5A:B7'
    interfaces:
      - eth1: 'D8:49:0B:DA:5A:B8'
    ipmiIp: 172.16.130.27
    roles:
      - compute

4.2. Network Configuration (Bare Metal Deployment)

Before deployment, there are some network configuration to be checked based on your network topology.Compass4nfv network default configuration file is “compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml”. You can write your own reference to it.

The following figure shows the default network configuration.

+--+                          +--+     +--+
|  |                          |  |     |  |
|  |      +------------+      |  |     |  |
|  +------+  Jumphost  +------+  |     |  |
|  |      +------+-----+      |  |     |  |
|  |             |            |  |     |  |
|  |             +------------+  +-----+  |
|  |                          |  |     |  |
|  |      +------------+      |  |     |  |
|  +------+    host1   +------+  |     |  |
|  |      +------+-----+      |  |     |  |
|  |             |            |  |     |  |
|  |             +------------+  +-----+  |
|  |                          |  |     |  |
|  |      +------------+      |  |     |  |
|  +------+    host2   +------+  |     |  |
|  |      +------+-----+      |  |     |  |
|  |             |            |  |     |  |
|  |             +------------+  +-----+  |
|  |                          |  |     |  |
|  |      +------------+      |  |     |  |
|  +------+    host3   +------+  |     |  |
|  |      +------+-----+      |  |     |  |
|  |             |            |  |     |  |
|  |             +------------+  +-----+  |
|  |                          |  |     |  |
|  |                          |  |     |  |
+-++                          ++-+     +-++
  ^                            ^         ^
  |                            |         |
  |                            |         |
+-+-------------------------+  |         |
|      External Network     |  |         |
+---------------------------+  |         |
       +-----------------------+---+     |
       |       IPMI Network        |     |
       +---------------------------+     |
               +-------------------------+-+
               | PXE(Installation) Network |
               +---------------------------+

4.3. Start Deployment (Bare Metal Deployment)

  1. Edit run.sh
Set OS version and OpenStack version for deployment nodes.
Compass4nfv Colorado supports three OS version based openstack mitaka.

E.g.

########## Ubuntu14.04 Mitaka ##########
export OS_VERSION=trusty
export OPENSTACK_VERSION=mitaka

########## Ubuntu16.04 Mitaka ##########
# export OS_VERSION=xenial
# export OPENSTACK_VERSION=mitaka_xenial

########## Centos7 Mitaka ##########
# export OS_VERSION=centos7
# export OPENSTACK_VERSION=mitaka

Set ISO image that you want to deploy

E.g.

# ISO_URL is your iso's absolute path
export ISO_URL=file:///home/compass/compass4nfv.iso
# or
# export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso

Set Jumphost PXE NIC. (set eth1 E.g.)

E.g.

########## Hardware Deploy Jumpserver PXE NIC ##########
# you need comment out it when virtual deploy
export INSTALL_NIC=eth1

Set scenario that you want to deploy

E.g.

nosdn-nofeature scenario deploy sample

# DHA is your dha.yml's path
export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-nosdn-nofeature-ha.yml

# NETWORK is your network.yml's path
export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml

ocl-nofeature scenario deploy sample

# DHA is your dha.yml's path
export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-ocl-nofeature-ha.yml

# NETWORK is your network.yml's path
export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_ocl.yml

odl_l2-moon scenario deploy sample

# DHA is your dha.yml's path
export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-moon-ha.yml

# NETWORK is your network.yml's path
export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml

odl_l2-nofeature scenario deploy sample

# DHA is your dha.yml's path
export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-nofeature-ha.yml

# NETWORK is your network.yml's path
export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml

odl_l3-nofeature scenario deploy sample

# DHA is your dha.yml's path
export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l3-nofeature-ha.yml

# NETWORK is your network.yml's path
export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml

onos-nofeature scenario deploy sample

# DHA is your dha.yml's path
export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-nofeature-ha.yml

# NETWORK is your network.yml's path
export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml

onos-sfc deploy scenario sample

# DHA is your dha.yml's path
export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-sfc-ha.yml

# NETWORK is your network.yml's path
export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
  1. Run run.sh
./run.sh