Yardstick Test Case Description TC006ΒΆ

Network Performance
test case id OPNFV_YARDSTICK_TC006_Virtual Traffic Classifier Data Plane Throughput Benchmarking Test.
metric Throughput
test purpose To measure the throughput supported by the virtual Traffic Classifier according to the RFC2544 methodology for a user-defined set of vTC deployment configurations.
configuration

file: file: opnfv_yardstick_tc006.yaml

packet_size: size of the packets to be used during the
throughput calculation. Allowe values: [64, 128, 256, 512, 1024, 1280, 1518]
vnic_type: type of VNIC to be used.
Allowed values are:
  • normal: for default OvS port configuration
  • direct: for SR-IOV port configuration

Default value: None

vtc_flavor: OpenStack flavor to be used for the vTC
Default available values are: m1.small, m1.medium, and m1.large, but the user can create his/her own flavor and give it as input Default value: None
vlan_sender: vlan tag of the network on which the vTC will
receive traffic (VLAN Network 1). Allowed values: range (1, 4096)
vlan_receiver: vlan tag of the network on which the vTC
will send traffic back to the packet generator (VLAN Network 2). Allowed values: range (1, 4096)
default_net_name: neutron name of the defaul network that
is used for access to the internet from the vTC (vNIC 1).
default_subnet_name: subnet name for vNIC1
(information available through Neutron).
vlan_net_1_name: Neutron Name for VLAN Network 1
(information available through Neutron).
vlan_subnet_1_name: Subnet Neutron name for VLAN Network 1
(information available through Neutron).
vlan_net_2_name: Neutron Name for VLAN Network 2
(information available through Neutron).
vlan_subnet_2_name: Subnet Neutron name for VLAN Network 2
(information available through Neutron).
test tool

DPDK pktgen

DPDK Pktgen is not part of a Linux distribution, hence it needs to be installed by the user.

references

DPDK Pktgen: DPDKpktgen

ETSI-NFV-TST001

RFC 2544: rfc2544

applicability Test can be configured with different flavors, vNIC type and packet sizes. Default values exist as specified above. The vNIC type and flavor MUST be specified by the user.
pre-test

The vTC has been successfully instantiated and configured. The user has correctly assigned the values to the deployment

configuration parameters.
  • Multicast traffic MUST be enabled on the network.

    The Data network switches need to be configured in order to manage multicast traffic.

  • In the case of SR-IOV vNICs use, SR-IOV compatible NICs

    must be used on the compute node.

  • Yarsdtick needs to be installed on a host connected to the

    data network and the host must have 2 DPDK-compatible NICs. Proper configuration of DPDK and DPDK pktgen is required before to run the test case. (For further instructions please refer to the ApexLake documentation).

test sequence Description and expected results
step 1 The vTC is deployed, according to the user-defined configuration
step 2 The vTC is correctly deployed and configured as necessary The initialization script has been correctly executed and vTC is ready to receive and process the traffic.
step 3 Test case is executed with the selected parameters: - vTC flavor - vNIC type - packet size The traffic is sent to the vTC using the maximum available traffic rate for 60 seconds.
step 4

The vTC instance forwards all the packets back to the packet generator for 60 seconds, as specified by RFC 2544.

Steps 3 and 4 are executed different times, with different rates in order to find the maximum supported traffic rate according to the current definition of throughput in RFC 2544.

test verdict The result of the test is a number between 0 and 100 which represents the throughput in terms of percentage of the available pktgen NIC bandwidth.