.. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 .. (c) OPNFV, Intel Corporation, AT&T and others. Integration tests ================= VSPERF includes a set of integration tests defined in conf/integration. These tests can be run by specifying --integration as a parameter to vsperf. Current tests in conf/integration are Overlay tests. VSPERF supports VXLAN, GRE and GENEVE tunneling protocols. Testing of these protocols is limited to unidirectional traffic and P2P (Physical to Physical scenarios). NOTE: The configuration for overlay tests provided in this guide is for unidirectional traffic only. Executing Tunnel encapsulation tests ------------------------------------ The VXLAN OVS DPDK encapsulation tests requires IPs, MAC addresses, bridge names and WHITELIST_NICS for DPDK. Default values are already provided. To customize for your environment, override the following variables in you user_settings.py file: .. code-block:: python # Variables defined in conf/integration/02_vswitch.conf # Tunnel endpoint for Overlay P2P deployment scenario # used for br0 VTEP_IP1 = '192.168.0.1/24' # Used as remote_ip in adding OVS tunnel port and # to set ARP entry in OVS (e.g. tnl/arp/set br-ext 192.168.240.10 02:00:00:00:00:02 VTEP_IP2 = '192.168.240.10' # Network to use when adding a route for inner frame data VTEP_IP2_SUBNET = '192.168.240.0/24' # Bridge names TUNNEL_INTEGRATION_BRIDGE = 'br0' TUNNEL_EXTERNAL_BRIDGE = 'br-ext' # IP of br-ext TUNNEL_EXTERNAL_BRIDGE_IP = '192.168.240.1/24' # vxlan|gre|geneve TUNNEL_TYPE = 'vxlan' # Variables defined conf/integration/03_traffic.conf # For OP2P deployment scenario TRAFFICGEN_PORT1_MAC = '02:00:00:00:00:01' TRAFFICGEN_PORT2_MAC = '02:00:00:00:00:02' TRAFFICGEN_PORT1_IP = '1.1.1.1' TRAFFICGEN_PORT2_IP = '192.168.240.10' To run VXLAN encapsulation tests: .. code-block:: console ./vsperf --conf-file user_settings.py --integration --test-params 'tunnel_type=vxlan' overlay_p2p_tput To run GRE encapsulation tests: .. code-block:: console ./vsperf --conf-file user_settings.py --integration --test-params 'tunnel_type=gre' overlay_p2p_tput To run GENEVE encapsulation tests: .. code-block:: console ./vsperf --conf-file user_settings.py --integration --test-params 'tunnel_type=geneve' overlay_p2p_tput To run OVS NATIVE tunnel tests (VXLAN/GRE/GENEVE): 1. Install the OVS kernel modules .. code:: console cd src/ovs/ovs sudo -E make modules_install 2. Set the following variables: .. code-block:: python VSWITCH = 'OvsVanilla' # Specify vport_* kernel module to test. VSWITCH_VANILLA_KERNEL_MODULES = ['vport_vxlan', 'vport_gre', 'vport_geneve', os.path.join(OVS_DIR_VANILLA, 'datapath/linux/openvswitch.ko')] 3. Run tests: .. code-block:: console ./vsperf --conf-file user_settings.py --integration --test-params 'tunnel_type=vxlan' overlay_p2p_tput Executing VXLAN decapsulation tests ------------------------------------ To run VXLAN decapsulation tests: 1. Set the variables used in "Executing Tunnel encapsulation tests" 2. Set dstmac of DUT_NIC2_MAC to the MAC adddress of the 2nd NIC of your DUT .. code-block:: python DUT_NIC2_MAC = '' 3. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --integration overlay_p2p_decap_cont If you want to use different values for your VXLAN frame, you may set: .. code-block:: python VXLAN_FRAME_L3 = {'proto': 'udp', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '192.168.240.1', } VXLAN_FRAME_L4 = {'srcport': 4789, 'dstport': 4789, 'vni': VXLAN_VNI, 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.0.10', 'inner_dstip': '192.168.240.9', 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } Executing GRE decapsulation tests --------------------------------- To run GRE decapsulation tests: 1. Set the variables used in "Executing Tunnel encapsulation tests" 2. Set dstmac of DUT_NIC2_MAC to the MAC adddress of the 2nd NIC of your DUT .. code-block:: python DUT_NIC2_MAC = '' 3. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --test-params 'tunnel_type=gre' --integration overlay_p2p_decap_cont If you want to use different values for your GRE frame, you may set: .. code-block:: python GRE_FRAME_L3 = {'proto': 'gre', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '192.168.240.1', } GRE_FRAME_L4 = {'srcport': 0, 'dstport': 0 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.0.10', 'inner_dstip': '192.168.240.9', 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } Executing GENEVE decapsulation tests ------------------------------------ IxNet 7.3X does not have native support of GENEVE protocol. The template, GeneveIxNetTemplate.xml_ClearText.xml, should be imported into IxNET for this testcase to work. To import the template do: 1. Run the IxNetwork TCL Server 2. Click on the Traffic menu 3. Click on the Traffic actions and click Edit Packet Templates 4. On the Template editor window, click Import. Select the template tools/pkt_gen/ixnet/GeneveIxNetTemplate.xml_ClearText.xml and click import. 5. Restart the TCL Server. To run GENEVE decapsulation tests: 1. Set the variables used in "Executing Tunnel encapsulation tests" 2. Set dstmac of DUT_NIC2_MAC to the MAC adddress of the 2nd NIC of your DUT .. code-block:: python DUT_NIC2_MAC = '' 3. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --test-params 'tunnel_type=geneve' --integration overlay_p2p_decap_cont If you want to use different values for your GENEVE frame, you may set: .. code-block:: python GENEVE_FRAME_L3 = {'proto': 'udp', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '192.168.240.1', } GENEVE_FRAME_L4 = {'srcport': 6081, 'dstport': 6081, 'geneve_vni': 0, 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.0.10', 'inner_dstip': '192.168.240.9', 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } Executing Native/Vanilla OVS VXLAN decapsulation tests ------------------------------------------------------ To run VXLAN decapsulation tests: 1. Set the following variables in your user_settings.py file: .. code-block:: python VSWITCH_VANILLA_KERNEL_MODULES = ['vport_vxlan', os.path.join(OVS_DIR_VANILLA, 'datapath/linux/openvswitch.ko')] DUT_NIC1_MAC = '' TRAFFICGEN_PORT1_IP = '172.16.1.2' TRAFFICGEN_PORT2_IP = '192.168.1.11' VTEP_IP1 = '172.16.1.2/24' VTEP_IP2 = '192.168.1.1' VTEP_IP2_SUBNET = '192.168.1.0/24' TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24' TUNNEL_INT_BRIDGE_IP = '192.168.1.1' VXLAN_FRAME_L2 = {'srcmac': '01:02:03:04:05:06', 'dstmac': DUT_NIC1_MAC } VXLAN_FRAME_L3 = {'proto': 'udp', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '172.16.1.1', } VXLAN_FRAME_L4 = { 'srcport': 4789, 'dstport': 4789, 'protocolpad': 'true', 'vni': 99, 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.1.2', 'inner_dstip': TRAFFICGEN_PORT2_IP, 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } 2. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --integration --test-params 'tunnel_type=vxlan' overlay_p2p_decap_cont Executing Native/Vanilla OVS GRE decapsulation tests ---------------------------------------------------- To run GRE decapsulation tests: 1. Set the following variables in your user_settings.py file: .. code-block:: python VSWITCH_VANILLA_KERNEL_MODULES = ['vport_gre', os.path.join(OVS_DIR_VANILLA, 'datapath/linux/openvswitch.ko')] DUT_NIC1_MAC = '' TRAFFICGEN_PORT1_IP = '172.16.1.2' TRAFFICGEN_PORT2_IP = '192.168.1.11' VTEP_IP1 = '172.16.1.2/24' VTEP_IP2 = '192.168.1.1' VTEP_IP2_SUBNET = '192.168.1.0/24' TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24' TUNNEL_INT_BRIDGE_IP = '192.168.1.1' GRE_FRAME_L2 = {'srcmac': '01:02:03:04:05:06', 'dstmac': DUT_NIC1_MAC } GRE_FRAME_L3 = {'proto': 'udp', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '172.16.1.1', } GRE_FRAME_L4 = { 'srcport': 4789, 'dstport': 4789, 'protocolpad': 'true', 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.1.2', 'inner_dstip': TRAFFICGEN_PORT2_IP, 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } 2. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --integration --test-params 'tunnel_type=gre' overlay_p2p_decap_cont Executing Native/Vanilla OVS GENEVE decapsulation tests ------------------------------------------------------- To run GENEVE decapsulation tests: 1. Set the following variables in your user_settings.py file: .. code-block:: python VSWITCH_VANILLA_KERNEL_MODULES = ['vport_geneve', os.path.join(OVS_DIR_VANILLA, 'datapath/linux/openvswitch.ko')] DUT_NIC1_MAC = '' TRAFFICGEN_PORT1_IP = '172.16.1.2' TRAFFICGEN_PORT2_IP = '192.168.1.11' VTEP_IP1 = '172.16.1.2/24' VTEP_IP2 = '192.168.1.1' VTEP_IP2_SUBNET = '192.168.1.0/24' TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24' TUNNEL_INT_BRIDGE_IP = '192.168.1.1' GENEVE_FRAME_L2 = {'srcmac': '01:02:03:04:05:06', 'dstmac': DUT_NIC1_MAC } GENEVE_FRAME_L3 = {'proto': 'udp', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '172.16.1.1', } GENEVE_FRAME_L4 = {'srcport': 6081, 'dstport': 6081, 'protocolpad': 'true', 'geneve_vni': 0, 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.1.2', 'inner_dstip': TRAFFICGEN_PORT2_IP, 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } 2. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --integration --test-params 'tunnel_type=geneve' overlay_p2p_decap_cont .. Revision: 7c91fcd7333a1d1e1371bfd31700c01d7da268b5 Build date: 2016-04-20