.. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 Architecture ------------ This section describes the architectural approach to incorporating the upstream OpenDaylight (ODL) SFC project into the OPNFV Brahmaputra platform. Service Functions +++++++++++++++++ A Service Function (SF) is a Function that provides services to flows traversing a Service Chain. Examples of typical SFs include: Firewall, NAT, QoS, and DPI. In the context of OPNFV, the SF will be a Virtual Network Function. The SFs receive data packets from a Service Function Forwarder. Service Function Forwarders +++++++++++++++++++++++++++ The Service Function Forwarder (SFF) is the core element used in Service Chaining. It is an OpenFlow switch that, in the context of OPNFV, is hosted in an OVS bridge. In OPNFV there will be one SFF per Compute Node that will be hosted in the "br-int" OpenStack OVS bridge. The responsibility of the SFF is to steer incoming packets to the corresponding Service Function, or to the SFF in the next compute node. The flows in the SFF are programmed by the OpenDaylight SFC SDN Controller. Service Chains ++++++++++++++ Service Chains are defined in the OpenDaylight SFC Controller using the following constructs: SFC A Service Function Chain (SFC) is an ordered list of abstract SF types. SFP A Service Function Path (SFP) references an SFC, and optionally provides concrete information about the SFC, like concrete SF instances. If SF instances are not supplied, then the RSP will choose them. RSP A Rendered Service Path (RSP) is the actual Service Chain. An RSP references an SFP, and effectively merges the information from the SFP and SFC to create the Service Chain. If concrete SF details were not provided in the SFP, then SF selection algorithms are used to choose one. When the RSP is created, the OpenFlows will be programmed and written to the SFF(s). Service Chaining Encapsulation ++++++++++++++++++++++++++++++ Service Chaining Encapsulation encapsulates traffic sent through the Service Chaining domain to facilitate easier steering of packets through Service Chains. If no Service Chaining Encapsulation is used, then packets much be classified at every hop of the chain, which would be slow and would not scale well. In ODL SFC, Network Service Headers (NSH) is used for Service Chaining encapsulation. NSH is an IETF specification that uses 2 main header fields to facilitate packet steering, namely: NSP (NSH Path) The NSP is the Service Path ID. NSI (NSH Index) The NSI is the Hop in the Service Chain. The NSI starts at 255 and is decremented by every SF. If the NSI reaches 0, then the packet is dropped which avoids loop detections. NSH also has metadata fields, but that's beyond the scope of this architecture. In ODL SFC, NSH packets are encapsulated in VXLAN-GPE. Classifiers +++++++++++ A classifier is the entry point into Service Chaining. The role of the classifier is to map incoming traffic to Service Chains. In ODL SFC, this mapping is performed by matching the packets and encapsulating the packets in a VXLAN-GPE NSH tunnel. The packet matching is specific to the classifier implementation, but can be as simple as an ACL, or can be more complex by using PCRF information or DPI. VNF Manager +++++++++++ In OPNFV SFC, a VNF Manager is needed to spin-up VMs for Service Functions. It has been decided to use the OpenStack Tacker VNF Mgr to spin-up and manage the life cylcle of the SFs. Tacker will receive the ODL SFC configuration, manage the SF VMs, and forward the configuration to ODL SFC. The following sequence diagram details the interactions with the VNF Mgr: .. image:: ./images/OPNFV_SFC_Brahmaputra_SfCreation.jpg OPNFV SFC Network Topology ++++++++++++++++++++++++++ The following image details the Network Topology used in OPNFV Brahmaputra SFC: .. image:: ./images/OPNFV_SFC_Brahmaputra_NW_Topology.jpg OVS NSH patch workaround ++++++++++++++++++++++++ When using NSH with VXLAN tunnels, its important that the VXLAN tunnel is terminated in the SF VM. This allows the SF to see the NSH header, allowing it to decrement the NSI and also to use the NSH metadata. When using VXLAN with OpenStack, the tunnels are not terminated in the VM, but in the "br-int" OVS bridge. There is work ongoing in the upstream OVS community to implemement NSH encapsulation. To get around the way OpenStack handles VXLAN tunnels, the OVS work will also include the ability to encapsulate/decapsulate VXLAN tunnels from OpenFlow rules, instead of relying on the Vtep ports. The ongoing upstream OVS work will probably not be finished by the time OPNFV Brahmaputra is released, so a work-around has been created. This work-around will use a private branch of OVS that has a preliminary version of NSH implemented. The following diagram illustrates how packets will be sent to an SF, when the SFF has processed the packet and wants to send it to the SF: .. image:: ./images/OPNFV_SFC_BrahmaputraOvsNshWorkaround_toSf.jpg The following diagram illustrates how packets will sent from an SF to an SFF, once the SF has processed a packet: .. image:: ./images/OPNFV_SFC_BrahmaputraOvsNshWorkaround_fromSf.jpg .. Revision: a0e2c1d0cbba861aac0b44bd61beb41ddca70630 Build date: 2016-09-02