Google, Inc. Serial Graphics Adapter 04/20/17 SGABIOS $Id$ (geeko@buildhost) Thu Apr 20 14:57:00 UTC 2017 4 0  SeaBIOS (version 1.0.0-prebuilt.qemu-project.org) M a c h i n e  U U I D  c 4 e 3 6 4 c 5 - 3 9 e d - 4 0 a 2 - 9 3 3 b - 7 f 8 8 b 8 f 7 4 5 c 8      iPXE (http://ipxe.org) 00:03.0 CA80 PCI2.10 PnP PMM+DFF97BD0+DFEF7BD0 CA80  Press Ctrl-B to configure iPXE (PCI 00:03.0)...                                                                                       Booting from Hard Disk...  GRUB loading.   Welcome to GRUB!   [?25lGNU GRUB version 2.02~beta2 +----------------------------------------------------------------------------+||||||||||||||||||||||||+----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line.  *openSUSE Leap 42.2  Advanced options for openSUSE Leap 42.2             G N U  G R U B   v e r s i o n  2 . 0 2 ~ b e t a 2    +----------------------------------------------------------------------------+||||||||||||||||||||||||||+----------------------------------------------------------------------------+     Use the ^ and v keys to select which entry is highlighted.                  Press enter to boot the selected OS, `e' to edit the commands               before booting or `c' for a command-line.                              *openSUSE Leap 42.2                                                          Advanced options for openSUSE Leap 42.2                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The highlighted entry will be executed automatically in 5s.                  The highlighted entry will be executed automatically in 5s.     The highlighted entry will be executed automatically in 4s.                  The highlighted entry will be executed automatically in 4s.     The highlighted entry will be executed automatically in 3s.                  The highlighted entry will be executed automatically in 3s.     The highlighted entry will be executed automatically in 2s.                  The highlighted entry will be executed automatically in 2s.     The highlighted entry will be executed automatically in 1s.                  The highlighted entry will be executed automatically in 1s.     The highlighted entry will be executed automatically in 0s.                  The highlighted entry will be executed automatically in 0s.  [?25h  Booting `openSUSE Leap 42.2'Booting `openSUSE Leap 42.2'   Loading Linux 4.4.79-18.26-default ... Loading Linux 4.4.79-18.26-default ...   text is deprecated. Use set gfxpayload=vga=normal before linux command instead. text is deprecated. Use set gfxpayload=vga=normal before linux command  instead.  text is deprecated. Use set gfxpayload=vga=normal before linux command instead. text is deprecated. Use set gfxpayload=vga=normal before linux command  instead.  Loading initial ramdisk ... Loading initial ramdisk ...   [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.79-18.26-default (geeko@buildhost) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP Thu Aug 10 20:30:05 UTC 2017 (fa5a935) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.79-18.26-default root=LABEL=cloudimg-rootfs nofb nomodeset vga=normal console=tty0 console=ttyS0,115200 no_timer_check nofb nomodeset vga=normal [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfffb000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] e820: last_pfn = 0xdfffb max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f1310-0x000f131f] mapped at [ffff8800000f1310] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] RAMDISK: [mem 0x3619a000-0x370c4fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F1170 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x00000000DFFFE410 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x00000000DFFFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x00000000DFFFE450 001135 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x00000000DFFFFF40 000040 [ 0.000000] ACPI: SSDT 0x00000000DFFFF6C0 00087A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x00000000DFFFF5D0 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x00000000DFFFF590 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11ffd1000-0x11fffbfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 1:1ff51001, primary cpu clock [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfffafff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfffb000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011fc00000 s94360 r8192 d32616 u1048576 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 11fc0d940 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032068 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.79-18.26-default root=LABEL=cloudimg-rootfs nofb nomodeset vga=normal console=tty0 console=ttyS0,115200 no_timer_check nofb nomodeset vga=normal [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 4025100K/4193892K available (6229K kernel code, 1381K rwdata, 4980K rodata, 2052K init, 2544K bss, 168792K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:440 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000000] tsc: Detected 2294.700 MHz processor [ 0.012000] Calibrating delay loop (skipped) preset value.. 4589.40 BogoMIPS (lpj=9178800) [ 0.016079] pid_max: default: 32768 minimum: 301 [ 0.020100] ACPI: Core revision 20150930 [ 0.025746] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.036086] Security Framework initialized [ 0.040123] AppArmor: AppArmor initialized [ 0.048090] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.057743] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.060390] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.064088] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.068307] Initializing cgroup subsys io [ 0.076093] Initializing cgroup subsys memory [ 0.080112] Initializing cgroup subsys devices [ 0.084097] Initializing cgroup subsys freezer [ 0.088143] Initializing cgroup subsys net_cls [ 0.092090] Initializing cgroup subsys perf_event [ 0.096129] Initializing cgroup subsys net_prio [ 0.100067] Initializing cgroup subsys hugetlb [ 0.104062] Initializing cgroup subsys pids [ 0.115388] mce: CPU supports 10 MCE banks [ 0.120987] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.124086] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.248189] Freeing SMP alternatives memory: 24K (ffffffff8215c000 - ffffffff82162000) [ 0.681103] ftrace: allocating 25407 entries in 100 pages [ 0.728000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.728000] smpboot: CPU0: Intel QEMU Virtual CPU version 1.0 (family: 0x6, model: 0x2, stepping: 0x3) [ 0.744035] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only. [ 0.760008] x86: Booting SMP configuration: [ 0.764005] .... node #0, CPUs: smpboot: smpboot: #1 [ 0.012000] kvm-clock: cpu 1, msr 1:1ff51041, secondary cpu clock [ 0.808171] x86: Booted up 1 node, 2 CPUs [ 0.808113] KVM setup async PF for cpu 1 [ 0.808113] kvm-stealtime: cpu 1, msr 11fd0d940 [ 0.820003] smpboot: Total of 2 processors activated (9178.80 BogoMIPS) [ 0.832296] devtmpfs: initialized [ 0.840058] evm: security.selinux [ 0.844003] evm: security.ima [ 0.848060] evm: security.capability [ 0.856301] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.860015] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.864468] pinctrl core: initialized pinctrl subsystem [ 0.869151] RTC time: 16:56:13, date: 08/30/17 [ 0.872589] NET: Registered protocol family 16 [ 0.912007] cpuidle: using governor ladder [ 0.928010] cpuidle: using governor menu [ 0.936996] ACPI: bus type PCI registered [ 0.940003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.945215] PCI: Using configuration type 1 for base access [ 0.964458] ACPI: Added _OSI(Module Device) [ 0.968004] ACPI: Added _OSI(Processor Device) [ 0.972005] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.976003] ACPI: Added _OSI(Processor Aggregator Device) [ 0.988578] ACPI: Interpreter enabled [ 0.992016] ACPI: (supports S0 S3 S4 S5) [ 0.996003] ACPI: Using IOAPIC for interrupt routing [ 1.000028] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.010692] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.012009] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 1.016009] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.020014] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 1.024994] acpiphp: Slot [3] registered [ 1.028133] acpiphp: Slot [4] registered [ 1.036016] acpiphp: Slot [5] registered [ 1.040131] acpiphp: Slot [6] registered [ 1.044156] acpiphp: Slot [7] registered [ 1.048137] acpiphp: Slot [8] registered [ 1.052143] acpiphp: Slot [9] registered [ 1.056131] acpiphp: Slot [10] registered [ 1.060134] acpiphp: Slot [11] registered [ 1.064131] acpiphp: Slot [12] registered [ 1.068268] acpiphp: Slot [13] registered [ 1.072142] acpiphp: Slot [14] registered [ 1.076146] acpiphp: Slot [15] registered [ 1.080131] acpiphp: Slot [16] registered [ 1.084139] acpiphp: Slot [17] registered [ 1.088139] acpiphp: Slot [18] registered [ 1.092134] acpiphp: Slot [19] registered [ 1.096154] acpiphp: Slot [20] registered [ 1.100204] acpiphp: Slot [21] registered [ 1.104132] acpiphp: Slot [22] registered [ 1.108192] acpiphp: Slot [23] registered [ 1.112129] acpiphp: Slot [24] registered [ 1.116143] acpiphp: Slot [25] registered [ 1.120136] acpiphp: Slot [26] registered [ 1.124130] acpiphp: Slot [27] registered [ 1.128132] acpiphp: Slot [28] registered [ 1.132147] acpiphp: Slot [29] registered [ 1.136129] acpiphp: Slot [30] registered [ 1.140130] acpiphp: Slot [31] registered [ 1.144138] PCI host bridge to bus 0000:00 [ 1.148006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.152003] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.156004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.160004] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window] [ 1.164004] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.196393] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.200004] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.204004] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.208004] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.236491] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 1.240252] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 1.341359] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 1.356755] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 1.380845] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 1.396704] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 1.412359] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 1.427622] ACPI: Enabled 16 GPEs in block 00 to 0F [ 1.432150] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.436000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.436006] vgaarb: loaded [ 1.440004] vgaarb: bridge control possible 0000:00:02.0 [ 1.450263] PCI: Using ACPI for IRQ routing [ 1.456318] NetLabel: Initializing [ 1.460003] NetLabel: domain hash size = 128 [ 1.464002] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.468020] NetLabel: unlabeled traffic allowed by default [ 1.473008] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.476310] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.496004] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.504234] amd_nb: Cannot enumerate AMD northbridges [ 1.508190] clocksource: Switched to clocksource kvm-clock [ 1.556389] AppArmor: AppArmor Filesystem Enabled [ 1.587232] pnp: PnP ACPI init [ 1.610379] pnp: PnP ACPI: found 6 devices [ 1.663267] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.709824] NET: Registered protocol family 2 [ 1.733630] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 1.774114] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.799729] TCP: Hash tables configured (established 32768 bind 32768) [ 1.822422] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.843415] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.867149] NET: Registered protocol family 1 [ 1.885590] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.906976] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.927874] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.950135] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.973207] Unpacking initramfs... [ 3.241865] Freeing initrd memory: 15532K (ffff88003619a000 - ffff8800370c5000) [ 3.275126] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.297745] software IO TLB [mem 0xdbffb000-0xdfffb000] (64MB) mapped at [ffff8800dbffb000-ffff8800dfffafff] [ 3.335021] Scanning for low memory corruption every 60 seconds [ 3.357244] kgr: successfully initialized [ 3.387776] audit: initializing netlink subsys (disabled) [ 3.410523] audit: type=2000 audit(1504112169.841:1): initialized [ 3.435404] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.459281] zbud: loaded [ 3.476670] VFS: Disk quotas dquot_6.6.0 [ 3.495659] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.520679] Key type big_key registered [ 3.548571] Key type asymmetric registered [ 3.568834] Asymmetric key parser 'x509' registered [ 3.590355] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.627178] io scheduler noop registered [ 3.646601] io scheduler deadline registered [ 3.666673] io scheduler cfq registered (default) [ 3.689077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.712849] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.738224] GHES: HEST is not enabled! [ 3.757527] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 3.828407] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.908883] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.945521] Non-volatile memory driver v1.3 [ 3.965367] Linux agpgart interface v0.103 [ 3.985758] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 4.031880] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.053542] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.075248] mousedev: PS/2 mouse device common for all mice [ 4.100860] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 4.101730] rtc_cmos 00:00: RTC can wake from S4 [ 4.143100] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 4.147397] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 4.147433] ledtrig-cpu: registered to indicate activity on CPUs [ 4.147475] hidraw: raw HID events driver (C) Jiri Kosina [ 4.261335] NET: Registered protocol family 10 [ 4.290225] microcode: CPU0 sig=0x623, pf=0x0, revision=0x1 [ 4.291009] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3 [ 4.359289] microcode: CPU1 sig=0x623, pf=0x0, revision=0x1 [ 4.393621] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 4.440464] registered taskstats version 1 [ 4.440506] zswap: loaded using pool lzo/zbud [ 4.440521] page_owner is disabled [ 4.463872] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input2 [ 4.493854] Key type encrypted registered [ 4.493861] AppArmor: AppArmor sha1 policy hashing enabled [ 4.493865] ima: No TPM chip found, activating TPM-bypass! [ 4.493885] evm: HMAC attrs: 0x1 [ 4.496782] Magic number: 13:854:945 [ 4.496908] tty tty2: hash matches [ 4.496941] cpu cpu0: hash matches [ 4.512218] rtc_cmos 00:00: setting system clock to 2017-08-30 16:56:19 UTC (1504112179) [ 4.765662] Freeing unused kernel memory: 2052K (ffffffff81f5b000 - ffffffff8215c000) [ 4.765781] Write protecting the kernel read-only data: 14336k [ 4.837195] Freeing unused kernel memory: 1948K (ffff880001619000 - ffff880001800000) [ 4.880554] Freeing unused kernel memory: 1164K (ffff880001cdd000 - ffff880001e00000) [ 4.940981] random: systemd: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 4.995043] random: systemd: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 4.995204] random: systemd: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 5.087709] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 5.088016] systemd[1]: Detected virtualization kvm. [ 5.088020] systemd[1]: Detected architecture x86-64. [ 5.088022] systemd[1]: Running in initial RAM disk. Welcome to openSUSE Leap 42.2 dracut-044-16.9.2 (Initramfs)! [ 5.222435] systemd[1]: Set hostname to . [ 5.314692] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available) [ 5.314814] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available) [ 5.314848] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available) [ 5.385840] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available) [ 5.386035] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available) [ 5.386290] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available) [ 5.386450] random: systemd: uninitialized urandom read (16 bytes read, 7 bits of entropy available) [ 5.389714] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.602753] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 5.649527] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 5.692016] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.728627] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Swap. [ OK ] Reached target Paths. [ OK ] Listening on udev Control Socket. [ OK ] Listening on Journal Socket. Starting Create list of required st... nodes for the current kernel... [ OK ] Reached target Sockets. Starting dracut cmdline hook... [ OK ] Reached target Local File Systems. Starting Journal Service... [ OK ] Reached target Timers. Starting Load Kernel Modules... [ OK ] Reached target Slices. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Journal Service. Starting Create Static Device Nodes in /dev... [ 6.024279] SCSI subsystem initialized [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Load Kernel Modules. Starting Apply Kernel Variables... [ OK ] Started Apply Kernel Variables. [ OK ] Started dracut cmdline hook. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting udev Coldplug all Devices... [ OK ] Started udev Coldplug all Devices. [ 6.231221] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 6.232580] virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver [ 6.234946] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 6.235651] virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver [ 6.300904] ACPI: bus type USB registered [ 6.301036] usbcore: registered new interface driver usbfs [ 6.301117] usbcore: registered new interface driver hub [ 6.301186] usbcore: registered new device driver usb [ 6.347168] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.352880] uhci_hcd: USB Universal Host Controller Interface driver [ 6.355123] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 6.355129] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 6.355386] uhci_hcd 0000:00:01.2: detected 2 ports [ 6.357714] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c140 [ 6.365722] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.365831] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.365832] usb usb1: Product: UHCI Host Controller [ 6.365833] usb usb1: Manufacturer: Linux 4.4.79-18.26-default uhci_hcd [ 6.365834] usb usb1: SerialNumber: 0000:00:01.2 [ 6.365993] hub 1-0:1.0: USB hub found [ 6.366243] hub 1-0:1.0: 2 ports detected [ 6.440312] vda: vda1 vda2 [ 6.877244] scsi host0: ata_piix [ 6.877373] scsi host1: ata_piix [ 6.877407] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc180 irq 14 [ 6.877408] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc188 irq 15 [ 6.967005] FDC 0 is a S82078B [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. [ OK ] Reached target System Initialization. [ OK ] Reached target Basic System. [ OK ] Found device /dev/disk/by-label/cloudimg-rootfs. Starting File System Check on /dev/disk/by-label/cloudimg-rootfs... [ OK ] Started File System Check on /dev/disk/by-label/cloudimg-rootfs. Mounting /sysroot... [ 7.439626] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /sysroot. [ OK ] Reached target Initrd Root File System. Starting Reload Configuration from the Real Root... [ OK ] Started Reload Configuration from the Real Root. [ OK ] Reached target Initrd File Systems. [ OK ] Reached target Initrd Default Target. Starting Cleaning Up and Shutting Down Daemons... [ OK ] Stopped dracut cmdline hook. [ OK ] Stopped target Timers. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped Cleaning Up and Shutting Down Daemons. [ OK ] Stopped target Initrd Default Target. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Stopped target Sockets. [ OK ] Stopped target Paths. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped target System Initialization. [ OK ] Stopped udev Coldplug all Devices. [ OK ] Stopped target Swap. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load Kernel Modules. Stopping udev Kernel Device Manager... [ OK ] Stopped target Local File Systems. [ OK ] Stopped udev Kernel Device Manager. [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create list of required sta...ce nodes for the current kernel. [ OK ] Closed udev Kernel Socket. [ OK ] Closed udev Control Socket. Starting Cleanup udevd DB... [ OK ] Started Cleanup udevd DB. [ OK ] Reached target Switch Root. Starting Switch Root... [ 8.264912] systemd-journald[105]: Received SIGTERM from PID 1 (n/a). [ 8.324914] systemd: 14 output lines suppressed due to ratelimiting Welcome to openSUSE Leap 42.2! [ OK ] Stopped Switch Root. [ OK ] Stopped Journal Service. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Stopped target Switch Root. Starting Remount Root and Kernel File Systems... [ OK ] Started Dispatch Password Requests to Console Di[ 8.675534] EXT4-fs (vda1): re-mounted. Opts: (null) rectory Watch. [ OK ] Listening on Device-mapper event daemon FIFOs. Starting Load Kernel Modules... Mounting Huge Pages File System... [ OK ] Created slice User and Session Slice. [ OK ] Stopped target Initrd File Systems. Starting Rule generator for /dev/root symlink... [ OK ] Reached target Remote File Systems. [ OK ] Listening on Syslog Socket. Starting Journal Service... [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point. [ OK ] Listening on udev Kernel Socket. [ OK ] Created slice system-getty.slice. [ OK ] Reached target Slices. [ OK ] Reached target Encrypted Volumes. [ OK ] Stopped target Initrd Root File System. Mounting POSIX Message Queue File System... [ OK ] Listening on LVM2 metadata daemon socket. [ OK ] Reached target Swap. Mounting Debug File System... [ OK ] Reached target Paths. Starting Setup Virtual Console... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. Starting Create list of required st... nodes for the current kernel... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on udev Control Socket. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Started Journal Service. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Load Kernel Modules. [ OK ] Started Rule generator for /dev/root symlink. [ OK ] Started Setup Virtual Console. [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Apply Kernel Variables... Starting Create System Users... Starting Rebuild Hardware Database... Starting Load/Save Random Seed... Starting Flush Journal to Persistent Storage... [ OK ] Started Create System Users. [ OK ] Started Load/Save Random Seed. [ OK ] Started Apply Kernel Variables. [ 9.488310] systemd-journald[350]: Received request to flush runtime journal from PID 1 Starting Create Static Device Nodes in /dev... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting Runtime Directory... Starting udev Kernel Device Manager... [ OK ] Mounted Runtime Directory. [ OK ] Started Rebuild Hardware Database. [ OK ] Started udev Kernel Device Manager. Starting udev Coldplug all Devices... [ OK ] Reached target Local File Systems. Starting Rebuild Journal Catalog... Starting Create Volatile Files and Directories... Starting Restore /run/initramfs on shutdown... [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Create Volatile Files and Directories. [ 9.894618] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 9.942399] ACPI: Power Button [PWRF] [ 9.947157] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 9.950282] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 9.957350] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 10.007434] 8139cp 0000:00:03.0 eth0: RTL-8139C+ at 0xffffc90000720000, 52:54:00:d6:b5:84, IRQ 11 [ 10.195415] [drm] Initialized drm 1.1.0 20060810 [ 10.227476] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 10.383002] ppdev: user-space parallel port driver [ OK ] Started Restore /run/initramfs on shutdown. [ OK ] Started udev Coldplug all Devices. [ OK ] Found device /dev/ttyS0. [ OK ] Created slice system-glean.slice. Starting udev Wait for Complete Device Initialization... Starting Update UTMP about System Boot/Shutdown... Starting Update is Completed... [ OK ] Started Update is Completed. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started udev Wait for Complete Device Initialization. [ OK ] Reached target System Initialization. [ OK ] Started Discard unused blocks once a week. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Open-iSCSI iscsid Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Grow root partition... Starting Login Service... [ OK ] Started D-Bus System Message Bus. Starting wicked AutoIPv4 supplicant service... Starting wicked DHCPv6 supplicant service... Starting System Logging Service... Starting /etc/init.d/boot.local Compatibility... Starting Glean for interface eth0... Starting Glean for interface lo... Starting Permit User Sessions... Starting Purge old kernels... Starting wicked DHCPv4 supplicant service... [ OK ] Started /etc/init.d/boot.local Compatibility. [ OK ] Started Permit User Sessions. [ OK ] Started System Logging Service. [ OK ] Started wicked DHCPv6 supplicant service. [ OK ] Started wicked AutoIPv4 supplicant service. [ OK ] Started Grow root partition. [ OK ] Started wicked DHCPv4 supplicant service. [ OK ] Started Login Service. Starting wicked network management service daemon... [ OK ] Started Getty on tty1. [ OK ] Started Getty on ttyS0. [ OK ] Started Getty on ttyS1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started /etc/init.d/after.local Compatibility. [ OK ] Started wicked network management service daemon. Starting wicked network nanny service... [ OK ] Started wicked network nanny service. [ OK ] Started Purge old kernels. [ OK ] Started Glean for interface eth0.  Welcome W to opeelcome tnSUo openSUSE Leap 42.2 - Kernel 4.4.79-18.26-default (ttyS0). opnfv login: SE Leap 42.2 - Kernel 4.4.79-18.26-default (ttyS0). opnfv login: