Google, Inc. Serial Graphics Adapter 06/09/14 SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (mockbuild@) Mon Jun 9 21:33:48 UTC 2014 4 0  SeaBIOS (version 1.9.1-5.el7_3.1) M a c h i n e  U U I D  a a 8 4 d c a 6 - 2 a 6 8 - 4 8 3 0 - a 3 d 4 - 3 6 e e d 3 f 6 f 3 0 b      iPXE (http://ipxe.org) 00:03.0 CA80 PCI2.10 PnP PMM+BFF97550+BFEF7550 CA80  Press Ctrl-B to configure iPXE (PCI 00:03.0)...                                                                                       Booting from ROM...  iPXE (PCI 00:03.0) starting execution...ok  iPXE initialising devices...ok         i iPPXXEE  11..00..00++  ((66336666ffaa77aa)) -- Open Source Network Boot Firmware -- hhttttpp::////iippxxee..oorrgg  Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT    Press Ctrl-B for the iPXE command line...                                           net0: 52:54:00:0f:e5:b0 using rtl8139 on PCI00:03.0 (open)    [Link:up, TX:0 TXE:0 RX:0 RXE:0]  Configuring (net0 52:54:00:0f:e5:b0)............... ok  net0: 192.168.122.139/255.255.255.0 gw 192.168.122.1  Next server: 192.168.122.1  Filename: http://192.168.122.1:8080/boot.ipxe  http://192.168.122.1:8080/boot.ipxe... ok  boot.ipxe : 405 bytes [script]  pxelinux.cfg/52-54-00-0f-e5-b0... No such file or directory (http://ipxe.org/2d0 c613b)  pxelinux.cfg/default... ok  Configuring (net0 52:54:00:0f:e5:b0)............... ok  http://192.168.122.1:8080/ipa.vmlinuz... ok  http://192.168.122.1:8080/ipa.initramfs... 65%     ok  Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 4.2.9-tinycore64 (tc@box) (gcc version 5.2.0 (GCC) ) #1999 SMP Mon Jan 18 19:59:34 UTC 2016 Command line: ipa-inspection-callback-url=http://192.168.122.1:5050/v1/continue systemd.journald.forward_to_console=yes ip=192.168.122.139:192.168.122.1:192.168.122.1:255.255.255.0 BOOTIF=52:54:00:0f:e5:b0 nofb nomodeset vga=normal console=ttyS0 x86/fpu: Legacy x87 FPU detected. x86/fpu: Using 'lazy' FPU context switches. e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000bfff9fff] usable BIOS-e820: [mem 0x00000000bfffa000-0x00000000bfffffff] reserved BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable NX (Execute Disable) protection: active SMBIOS 2.4 present. Hypervisor detected: KVM e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 x86/PAT: PAT not supported by CPU. e820: last_pfn = 0xbfffa max_arch_pfn = 0x400000000 found SMP MP-table at [mem 0x000f73c0-0x000f73cf] mapped at [ffff8800000f73c0] init_memory_mapping: [mem 0x00000000-0x000fffff] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] init_memory_mapping: [mem 0x120000000-0x13fdfffff] init_memory_mapping: [mem 0x00100000-0xbfff9fff] init_memory_mapping: [mem 0x100000000-0x11fffffff] RAMDISK: [mem 0x7d96afff-0x7fffffff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F71D0 000014 (v00 BOCHS ) ACPI: RSDT 0x00000000BFFFFB04 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x00000000BFFFF177 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x00000000BFFFE040 001137 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x00000000BFFFE000 000040 ACPI: SSDT 0x00000000BFFFF1EB 000899 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) ACPI: APIC 0x00000000BFFFFA84 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: cpu 0, msr 1:3fffc001, primary cpu clock clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000013fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bfff9fff] node 0: [mem 0x0000000100000000-0x000000013fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] ACPI: PM-Timer IO Port: 0x608 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Using ACPI (MADT) for SMP configuration information smpboot: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] PM: Registered nosave memory: [mem 0xbfffa000-0xbfffffff] PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices Booting paravirtualized kernel on KVM clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 31 pages/cpu @ffff88013fc00000 s89624 r8192 d29160 u1048576 KVM setup async PF for cpu 0 kvm-stealtime: cpu 0, msr 13fc0e240 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1034112 Kernel command line: ipa-inspection-callback-url=http://192.168.122.1:5050/v1/continue systemd.journald.forward_to_console=yes ip=192.168.122.139:192.168.122.1:192.168.122.1:255.255.255.0 BOOTIF=52:54:00:0f:e5:b0 nofb nomodeset vga=normal console=ttyS0 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 4013752K/4193888K available (5237K kernel code, 679K rwdata, 1444K rodata, 964K init, 760K bss, 180136K reserved, 0K cma-reserved) Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:4352 nr_irqs:440 16 Console: colour VGA+ 80x25 console [ttyS0] enabled tsc: Detected 2294.712 MHz processor Calibrating delay loop (skipped) preset value.. 4591.65 BogoMIPS (lpj=7649040) pid_max: default: 32768 minimum: 301 ACPI: Core revision 20150619 ACPI: All ACPI Tables successfully acquired Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Initializing cgroup subsys blkio Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio mce: CPU supports 10 MCE banks Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 Freeing SMP alternatives memory: 16K (ffffffff8199c000 - ffffffff819a0000) ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel QEMU Virtual CPU version 1.5.3 (fam: 06, model: 0d, stepping: 03) Performance Events: Broken PMU hardware detected, using software events only. Failed to access perfctr msr (MSR c2 is 0) x86: Booting SMP configuration: .... node #0, CPUs: #1 kvm-clock: cpu 1, msr 1:3fffc041, secondary cpu clock x86: Booted up 1 node, 2 CPUs KVM setup async PF for cpu 1 kvm-stealtime: cpu 1, msr 13fd0e240 smpboot: Total of 2 processors activated (9182.30 BogoMIPS) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: Using configuration type 1 for base access ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150619/hwxface-580) ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. acpiphp: Slot [3] registered acpiphp: Slot [4] registered acpiphp: Slot [5] registered acpiphp: Slot [6] registered acpiphp: Slot [7] registered acpiphp: Slot [8] registered acpiphp: Slot [9] registered acpiphp: Slot [10] registered acpiphp: Slot [11] registered acpiphp: Slot [12] registered acpiphp: Slot [13] registered acpiphp: Slot [14] registered acpiphp: Slot [15] registered acpiphp: Slot [16] registered acpiphp: Slot [17] registered acpiphp: Slot [18] registered acpiphp: Slot [19] registered acpiphp: Slot [20] registered acpiphp: Slot [21] registered acpiphp: Slot [22] registered acpiphp: Slot [23] registered acpiphp: Slot [24] registered acpiphp: Slot [25] registered acpiphp: Slot [26] registered acpiphp: Slot [27] registered acpiphp: Slot [28] registered acpiphp: Slot [29] registered acpiphp: Slot [30] registered acpiphp: Slot [31] registered PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKS] (IRQs *9) ACPI: Enabled 16 GPEs in block 00 to 0F vgaarb: setting as boot device: PCI:0000:00:02.0 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Linux video capture interface: v2.00 PCI: Using ACPI for IRQ routing clocksource: Switched to clocksource kvm-clock pnp: PnP ACPI init pnp: PnP ACPI: found 6 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Trying to unpack rootfs image as initramfs... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at arch/x86/mm/init.c:653 0xffffffff81039ebb() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.9-tinycore64 #1999 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 0000000000000000 0000000000000009 ffffffff81514b36 0000000000000000 ffffffff81069070 ffffffff81942300 ffffffff81039ebb ffffffff81942300 ffff88007d96b000 ffff880080000000 ffff88007d96b000 ffffffff816a8f8e Call Trace: [] ? 0xffffffff81514b36 [] ? 0xffffffff81069070 [] ? 0xffffffff81039ebb [] ? 0xffffffff81039ebb [] ? 0xffffffff818c33d8 [] ? 0xffffffff818c3b12 [] ? 0xffffffff818c3a24 [] ? 0xffffffff810020d3 [] ? 0xffffffff818c1eef [] ? 0xffffffff81510b69 [] ? 0xffffffff81510b6f [] ? 0xffffffff81519b1f [] ? 0xffffffff81510b69 ---[ end trace d0b675bc2f64b80c ]--- Freeing initrd memory: 39508K (ffff88007d96b000 - ffff880080000000) PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB [mem 0xbbffa000-0xbfffa000] (64MB) mapped at [ffff8800bbffa000-ffff8800bfff9fff] futex hash table entries: 512 (order: 3, 32768 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... fuse init (API version 7.23) NET: Registered protocol family 38 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] GHES: HEST is not enabled! ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver xenfs: not registering filesystem on non-xen platform Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A Non-volatile memory driver v1.3 Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). AMD IOMMUv2 driver by Joerg Roedel AMD IOMMUv2 functionality not available on this system brd: module loaded mtip32xx Version 1.3.1 zram: Added device: zram0 VMware PVSCSI driver - version 1.0.5.0-k scsi host0: ata_piix scsi host1: ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc180 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc188 irq 15 libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky PPP generic driver version 2.4.2 PPP Deflate Compression module registered NET: Registered protocol family 24 VFIO - User Level meta-driver version: 0.3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:01.2: UHCI Host Controller uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c140 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-cypress usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums_eneub6250 usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-onetouch usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver appletouch input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 usbcore: registered new interface driver bcm5974 usbcore: registered new interface driver synaptics_usb rtc_cmos 00:00: RTC can wake from S4 rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:00: alarms up to one day, 114 bytes nvram intel_powerclamp: Intel powerclamp does not run on family 6 model 13 softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) ledtrig-cpu: registered to indicate activity on CPUs hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver Netfilter messages via NETLINK v0.30. nfnl_acct: registering with nfnetlink. ipip: IPv4 over IPv4 tunneling driver IPv4 over IPsec tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team geneve_core: Geneve core logic Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Key type dns_resolver registered registered taskstats version 1 rtc_cmos 00:00: setting system clock to 2017-04-26 10:18:53 UTC (1493201933) Freeing unused kernel memory: 964K (ffffffff818ab000 - ffffffff8199c000) Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 896K (ffff880001520000 - ffff880001600000) Freeing unused kernel memory: 604K (ffff880001769000 - ffff880001800000) mount: mounting rootfs on / failed: Invalid argument Booting Core 7.2  Running Linux Kernel 4.2.9-tinycore64. Checking boot options... Done. Starting udev daemon for hotplug support.../input: PC Speaker as /devices/platform/pcspkr/input/input4 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)  Done. loop: module loaded Skipping compressed swap in ram as requested from the boot command line. Scanning hard disk partitions to create /etc/fstab  Setting Language to C Done. FDC 0 is a S82078B squashfs: version 4.0 (2009/01/31) Phillip Lougher 8139cp 0000:00:03.0 eth0: RTL-8139C+ at 0xffffc90000032000, 52:54:00:0f:e5:b0, IRQ 11 ppdev: user-space parallel port driver 8139too: 8139too Fast Ethernet driver 0.9.28 random: mktemp urandom read with 5 bits of entropy available Possible swap partition(s) enabled. Loading extensions.../ Done. Setting keymap to us Done. Setting hostname to box Done. + echo Starting bootlocal script: Starting bootlocal script: + date Wed Apr 26 10:18:54 UTC 2017 + export HOME=/root + [ -f /usr/local/etc/init.d/openssh ] + type ironic-python-agent + export PYTHONOPTIMIZE=1 + echo Starting Ironic Python Agent: Starting Ironic Python Agent: + date Wed Apr 26 10:18:54 UTC 2017 + ironic-python-agent + tee /var/log/ironic-python-agent.log 8139cp 0000:00:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 login[378]: root login on 'tty1' /usr/local/lib/python2.7/site-packages/pecan/__init__.py:122: RuntimeWarning: `static_root` is only used when `debug` is True, ignoring 2017-04-26 10:18:54.833 383 WARNING root [-] Could not find the SCSI address (HCTL) for device /dev/vda. Skipping 2017-04-26 10:18:54.842 383 WARNING root [-] Can't find field vendor for device ip_vti0 in device class net 2017-04-26 10:18:54.848 383 WARNING root [-] Can't find field vendor for device dummy0 in device class net 2017-04-26 10:18:54.855 383 WARNING root [-] Can't find field vendor for device lo in device class net 2017-04-26 10:18:54.861 383 WARNING root [-] Can't find field vendor for device tunl0 in device class net 2017-04-26 10:18:54.862 383 WARNING root [-] Can't find field vendor for device ip_vti0 in device class net 2017-04-26 10:18:54.862 383 WARNING root [-] Can't find field vendor for device dummy0 in device class net 2017-04-26 10:18:54.862 383 WARNING root [-] Can't find field vendor for device lo in device class net 2017-04-26 10:18:54.863 383 WARNING root [-] Can't find field vendor for device tunl0 in device class net input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 2017-04-26 10:18:54.936 383 WARNING root [-] Could not find the SCSI address (HCTL) for device /dev/vda. Skipping 2017-04-26 10:18:54.936 383 INFO root [-] Hardware manager found: ironic_python_agent.hardware:GenericHardwareManager 2017-04-26 10:18:54.937 383 WARNING root [-] Can't find field vendor for device ip_vti0 in device class net 2017-04-26 10:18:54.937 383 WARNING root [-] Can't find field vendor for device dummy0 in device class net 2017-04-26 10:18:54.937 383 WARNING root [-] Can't find field vendor for device lo in device class net 2017-04-26 10:18:54.937 383 WARNING root [-] Can't find field vendor for device tunl0 in device class net 2017-04-26 10:18:54.974 383 INFO ironic_python_agent.inspector [-] inspection is enabled with collectors ['default'] 2017-04-26 10:18:54.998 383 WARNING root [-] Could not find the SCSI address (HCTL) for device /dev/vda. Skipping 2017-04-26 10:18:55.026 383 INFO ironic_python_agent.inspector [-] posting collected data to http://192.168.122.1:5050/v1/continue 2017-04-26 10:20:46.288 383 ERROR ironic_python_agent.inspector [-] inspector error 400: { "error": { "message": "Swift failed to create object inspector_data-93494378-56ee-5e22-b6f0-e3be3a9ebdf1 in container ironic-inspector. Error was: Object PUT failed: http://localhost:8080/ironic-inspector/inspector_data-93494378-56ee-5e22-b6f0-e3be3a9ebdf1 500 Internal Server Error [first 60 chars of response] \r\n500 Internal Server Error