Google, Inc. Serial Graphics Adapter 03/14/17 SGABIOS $Id$ (abuild@cloud131) Tue Mar 14 14:37:27 UTC 2017 4 0  SeaBIOS (version rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org) M a c h i n e  U U I D  a 2 d 7 9 e 5 c - 9 d 3 6 - 4 a f 7 - b c 7 8 - d f b e a c 0 8 6 3 5 1      iPXE (http://ipxe.org) 00:03.0 CA80 PCI2.10 PnP PMM+DFF96D80+DFEF6D80 CA80  Press Ctrl-B to configure iPXE (PCI 00:03.0)...                                                                                       Booting from ROM...  iPXE (PCI 00:03.0) starting execution...ok  iPXE initialising devices...ok         i iPPXXEE  11..00..00++ -- Open Source Network Boot Firmware -- hhttttpp::////iippxxee..oorrgg  Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT    Press Ctrl-B for the iPXE command line...                                           net0: 52:54:00:de:b7:b5 using rtl8139 on PCI00:03.0 (open)    [Link:up, TX:0 TXE:0 RX:0 RXE:0]  Configuring (net0 52:54:00:de:b7:b5)..... ok  net0: 192.168.122.201/255.255.255.0 gw 192.168.122.1  Next server: 192.168.122.1  Filename: http://192.168.122.1:8080/boot.ipxe  http://192.168.122.1:8080/boot.ipxe... ok  boot.ipxe : 405 bytes [script]  /pxelinux.cfg/52-54-00-de-b7-b5... No such file or directory (http://ipxe.org/2d 0c613b)  /pxelinux.cfg/default... ok  Configuring (net0 52:54:00:de:b7:b5)...... ok  http://192.168.122.1:8080/ipa.vmlinuz... ok  http://192.168.122.1:8080/ipa.initramfs... 50%     ok  Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 4.2.9-tinycore64 (tc@box) (gcc version 5.2.0 (GCC) ) #1999 SMP Mon Jan 18 19:59:34 UTC 2016 Command line: ipa-inspection-callback-url=http://192.168.122.1:5050/v1/continue systemd.journald.forward_to_console=yes ip=192.168.122.201:192.168.122.1:192.168.122.1:255.255.255.0 BOOTIF=52:54:00:de:b7:b5 nofb nomodeset vga=normal console=ttyS0 x86/fpu: Legacy x87 FPU detected. x86/fpu: Using 'lazy' FPU context switches. e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000dfffafff] usable BIOS-e820: [mem 0x00000000dfffb000-0x00000000dfffffff] reserved BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable NX (Execute Disable) protection: active SMBIOS 2.4 present. Hypervisor detected: KVM e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 x86/PAT: PAT not supported by CPU. e820: last_pfn = 0xdfffb max_arch_pfn = 0x400000000 found SMP MP-table at [mem 0x000f1b80-0x000f1b8f] mapped at [ffff8800000f1b80] init_memory_mapping: [mem 0x00000000-0x000fffff] init_memory_mapping: [mem 0x11fe00000-0x11fffffff] init_memory_mapping: [mem 0x100000000-0x11fdfffff] init_memory_mapping: [mem 0x00100000-0xdfffafff] RAMDISK: [mem 0x7d9eafff-0x7fffffff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F19E0 000014 (v00 BOCHS ) ACPI: RSDT 0x00000000DFFFE410 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x00000000DFFFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x00000000DFFFE450 001135 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x00000000DFFFFF40 000040 ACPI: SSDT 0x00000000DFFFF6C0 00087A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) ACPI: APIC 0x00000000DFFFF5D0 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x00000000DFFFF590 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: cpu 0, msr 1:1fffb001, primary cpu clock clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000011fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000dfffafff] node 0: [mem 0x0000000100000000-0x000000011fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff] ACPI: PM-Timer IO Port: 0xb008 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] PM: Registered nosave memory: [mem 0xdfffb000-0xdfffffff] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices Booting paravirtualized kernel on KVM clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 31 pages/cpu @ffff88011fc00000 s89624 r8192 d29160 u1048576 KVM setup async PF for cpu 0 kvm-stealtime: cpu 0, msr 11fc0e240 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1034113 Kernel command line: ipa-inspection-callback-url=http://192.168.122.1:5050/v1/continue systemd.journald.forward_to_console=yes ip=192.168.122.201:192.168.122.1:192.168.122.1:255.255.255.0 BOOTIF=52:54:00:de:b7:b5 nofb nomodeset vga=normal console=ttyS0 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 4012228K/4193892K available (5237K kernel code, 679K rwdata, 1444K rodata, 964K init, 760K bss, 181664K reserved, 0K cma-reserved) Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:4352 nr_irqs:440 16 Console: colour VGA+ 80x25 console [ttyS0] enabled clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns tsc: Detected 2294.710 MHz processor Calibrating delay loop (skipped) preset value.. 4591.64 BogoMIPS (lpj=7649033) pid_max: default: 32768 minimum: 301 ACPI: Core revision 20150619 ACPI: All ACPI Tables successfully acquired Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Initializing cgroup subsys blkio Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio mce: CPU supports 10 MCE banks Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 Freeing SMP alternatives memory: 16K (ffffffff8199c000 - ffffffff819a0000) ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel QEMU Virtual CPU version 1.0 (fam: 06, model: 02, stepping: 03) Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only. x86: Booting SMP configuration: .... node #0, CPUs: #1 kvm-clock: cpu 1, msr 1:1fffb041, secondary cpu clock x86: Booted up 1 node, 2 CPUs KVM setup async PF for cpu 1 kvm-stealtime: cpu 1, msr 11fd0e240 smpboot: Total of 2 processors activated (9182.29 BogoMIPS) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: Using configuration type 1 for base access ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580) ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. acpiphp: Slot [3] registered acpiphp: Slot [4] registered acpiphp: Slot [5] registered acpiphp: Slot [6] registered acpiphp: Slot [7] registered acpiphp: Slot [8] registered acpiphp: Slot [9] registered acpiphp: Slot [10] registered acpiphp: Slot [11] registered acpiphp: Slot [12] registered acpiphp: Slot [13] registered acpiphp: Slot [14] registered acpiphp: Slot [15] registered acpiphp: Slot [16] registered acpiphp: Slot [17] registered acpiphp: Slot [18] registered acpiphp: Slot [19] registered acpiphp: Slot [20] registered acpiphp: Slot [21] registered acpiphp: Slot [22] registered acpiphp: Slot [23] registered acpiphp: Slot [24] registered acpiphp: Slot [25] registered acpiphp: Slot [26] registered acpiphp: Slot [27] registered acpiphp: Slot [28] registered acpiphp: Slot [29] registered acpiphp: Slot [30] registered acpiphp: Slot [31] registered PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKS] (IRQs *9) ACPI: Enabled 16 GPEs in block 00 to 0F vgaarb: setting as boot device: PCI:0000:00:02.0 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Linux video capture interface: v2.00 PCI: Using ACPI for IRQ routing HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 100.000000 MHz counter clocksource: Switched to clocksource kvm-clock pnp: PnP ACPI init pnp: PnP ACPI: found 6 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Trying to unpack rootfs image as initramfs... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at arch/x86/mm/init.c:653 0xffffffff81039ebb() Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.2.9-tinycore64 #1999 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000000 0000000000000009 ffffffff81514b36 0000000000000000 ffffffff81069070 ffffffff81942300 ffffffff81039ebb ffffffff81942300 ffff88007d9eb000 ffff880080000000 ffff88007d9eb000 ffffffff816a8f8e Call Trace: [] ? 0xffffffff81514b36 [] ? 0xffffffff81069070 [] ? 0xffffffff81039ebb [] ? 0xffffffff81039ebb [] ? 0xffffffff818c33d8 [] ? 0xffffffff818c3b12 [] ? 0xffffffff818c3a24 [] ? 0xffffffff810020d3 [] ? 0xffffffff818c1eef [] ? 0xffffffff81510b69 [] ? 0xffffffff81510b6f [] ? 0xffffffff81519b1f [] ? 0xffffffff81510b69 ---[ end trace 1f50a9e85b5fca85 ]--- Freeing initrd memory: 38996K (ffff88007d9eb000 - ffff880080000000) PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB [mem 0xdbffb000-0xdfffb000] (64MB) mapped at [ffff8800dbffb000-ffff8800dfffafff] futex hash table entries: 512 (order: 3, 32768 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... fuse init (API version 7.23) NET: Registered protocol family 38 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] GHES: HEST is not enabled! ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver xenfs: not registering filesystem on non-xen platform Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A Non-volatile memory driver v1.3 Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). AMD IOMMUv2 driver by Joerg Roedel AMD IOMMUv2 functionality not available on this system brd: module loaded mtip32xx Version 1.3.1 zram: Added device: zram0 VMware PVSCSI driver - version 1.0.5.0-k scsi host0: ata_piix scsi host1: ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc180 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc188 irq 15 libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky PPP generic driver version 2.4.2 PPP Deflate Compression module registered NET: Registered protocol family 24 VFIO - User Level meta-driver version: 0.3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:01.2: UHCI Host Controller uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c140 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-cypress usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums_eneub6250 usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-onetouch usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver appletouch usbcore: registered new interface driver bcm5974 usbcore: registered new interface driver synaptics_usb rtc_cmos 00:00: RTC can wake from S4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs intel_powerclamp: Intel powerclamp does not run on family 6 model 2 softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) ledtrig-cpu: registered to indicate activity on CPUs hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver Netfilter messages via NETLINK v0.30. nfnl_acct: registering with nfnetlink. ipip: IPv4 over IPv4 tunneling driver IPv4 over IPsec tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team geneve_core: Geneve core logic Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Key type dns_resolver registered registered taskstats version 1 rtc_cmos 00:00: setting system clock to 2017-03-24 10:26:47 UTC (1490351207) Freeing unused kernel memory: 964K (ffffffff818ab000 - ffffffff8199c000) Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 896K (ffff880001520000 - ffff880001600000) Freeing unused kernel memory: 604K (ffff880001769000 - ffff880001800000) mount: mounting rootfs on / failed: Invalid argument Booting Core 7.2  Running Linux Kernel 4.2.9-tinycore64. Checking boot options... Done. Starting udev daemon for hotplug support.../8139too: 8139too Fast Ethernet driver 0.9.28 input: PC Speaker as /devices/platform/pcspkr/input/input4  Done. loop: module loaded Skipping compressed swap in ram as requested from the boot command line. Scanning hard disk partitions to create /etc/fstab  Setting Language to C Done. 8139too 0000:00:03.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip, use 8139cp squashfs: version 4.0 (2009/01/31) Phillip Lougher 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) ppdev: user-space parallel port driver random: mktemp urandom read with 5 bits of entropy available 8139cp 0000:00:03.0 eth0: RTL-8139C+ at 0xffffc90000024000, 52:54:00:de:b7:b5, IRQ 11 Possible swap partition(s) enabled. Loading extensions.../FDC 0 is a S82078B  Done. Setting keymap to us Done. Setting hostname to box 8139cp 0000:00:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 Done. + echo Starting bootlocal script: Starting bootlocal script: + date Fri Mar 24 10:26:47 UTC 2017 + export HOME=/root + [ -f /usr/local/etc/init.d/openssh ] + type ironic-python-agent + export PYTHONOPTIMIZE=1 + echo Starting Ironic Python Agent: Starting Ironic Python Agent: + date Fri Mar 24 10:26:47 UTC 2017 + tee /var/log/ironic-python-agent.log + ironic-python-agent login[419]: root login on 'tty1' input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 /usr/local/lib/python2.7/site-packages/pecan/__init__.py:122: RuntimeWarning: `static_root` is only used when `debug` is True, ignoring 2017-03-24 10:26:47.988 422 WARNING root [-] Could not find the SCSI address (HCTL) for device /dev/vda. Skipping 2017-03-24 10:26:47.989 422 WARNING root [-] Can't find field vendor for device ip_vti0 in device class net 2017-03-24 10:26:47.990 422 WARNING root [-] Can't find field vendor for device dummy0 in device class net 2017-03-24 10:26:47.990 422 WARNING root [-] Can't find field vendor for device lo in device class net 2017-03-24 10:26:47.990 422 WARNING root [-] Can't find field vendor for device tunl0 in device class net 2017-03-24 10:26:47.990 422 WARNING root [-] Can't find field vendor for device ip_vti0 in device class net 2017-03-24 10:26:47.990 422 WARNING root [-] Can't find field vendor for device dummy0 in device class net 2017-03-24 10:26:47.991 422 WARNING root [-] Can't find field vendor for device lo in device class net 2017-03-24 10:26:47.991 422 WARNING root [-] Can't find field vendor for device tunl0 in device class net 2017-03-24 10:26:48.068 422 WARNING root [-] Could not find the SCSI address (HCTL) for device /dev/vda. Skipping 2017-03-24 10:26:48.075 422 INFO root [-] Hardware manager found: ironic_python_agent.hardware:GenericHardwareManager 2017-03-24 10:26:48.075 422 WARNING root [-] Can't find field vendor for device ip_vti0 in device class net 2017-03-24 10:26:48.078 422 WARNING root [-] Can't find field vendor for device dummy0 in device class net 2017-03-24 10:26:48.079 422 WARNING root [-] Can't find field vendor for device lo in device class net 2017-03-24 10:26:48.080 422 WARNING root [-] Can't find field vendor for device tunl0 in device class net 2017-03-24 10:26:48.128 422 INFO ironic_python_agent.inspector [-] inspection is enabled with collectors ['default'] 2017-03-24 10:26:50.173 422 WARNING root [-] Could not find the SCSI address (HCTL) for device /dev/vda. Skipping 2017-03-24 10:26:50.233 422 INFO ironic_python_agent.inspector [-] posting collected data to http://192.168.122.1:5050/v1/continue 2017-03-24 10:26:51.031 422 INFO ironic_python_agent.inspector [-] setting IPMI credentials was not requested 2017-03-24 10:26:51.031 422 INFO ironic_python_agent.inspector [-] inspection finished successfully 2017-03-24 10:26:51.031 422 INFO ironic_python_agent.agent [-] No ipa-api-url configured, Heartbeat and lookup skipped for inspector.  Google, Inc. Serial Graphics Adapter 03/14/17 SGABIOS $Id$ (abuild@cloud131) Tue Mar 14 14:37:27 UTC 2017 4 0  SeaBIOS (version rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org) M a c h i n e  U U I D  a 2 d 7 9 e 5 c - 9 d 3 6 - 4 a f 7 - b c 7 8 - d f b e a c 0 8 6 3 5 1      iPXE (http://ipxe.org) 00:03.0 CA80 PCI2.10 PnP PMM+DFF96D80+DFEF6D80 CA80  Press Ctrl-B to configure iPXE (PCI 00:03.0)...                                                                                       Booting from ROM...  iPXE (PCI 00:03.0) starting execution...ok  iPXE initialising devices...ok         i iPPXXEE  11..00..00++ -- Open Source Network Boot Firmware -- hhttttpp::////iippxxee..oorrgg  Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT    Press Ctrl-B for the iPXE command line...                                           net0: 52:54:00:de:b7:b5 using rtl8139 on PCI00:03.0 (open)    [Link:up, TX:0 TXE:0 RX:0 RXE:0]  Configuring (net0 52:54:00:de:b7:b5)...... ok  net0: 192.168.122.201/255.255.255.0 gw 192.168.122.1  Next server: 192.168.122.1  Filename: http://192.168.122.1:8080/boot.ipxe  http://192.168.122.1:8080/boot.ipxe... ok  boot.ipxe : 404 bytes [script]  /pxelinux.cfg/52-54-00-de-b7-b5... ok  http://192.168.122.1:8080//c1a56cb3-fcef-59d5-8105-7e6815154f70/deploy_kernel...  ok  http://192.168.122.1:8080//c1a56cb3-fcef-59d5-8105-7e6815154f70/deploy_ramdisk.. . 51%     ok   Google, Inc. Serial Graphics Adapter 03/14/17 SGABIOS $Id$ (abuild@cloud131) Tue Mar 14 14:37:27 UTC 2017 4 0  SeaBIOS (version rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org) M a c h i n e  U U I D  a 2 d 7 9 e 5 c - 9 d 3 6 - 4 a f 7 - b c 7 8 - d f b e a c 0 8 6 3 5 1      iPXE (http://ipxe.org) 00:03.0 CA80 PCI2.10 PnP PMM+DFF96D80+DFEF6D80 CA80  Press Ctrl-B to configure iPXE (PCI 00:03.0)...                                                                                       Booting from Hard Disk...  GRUB loading.   Welcome to GRUB!   [?25lGNU GRUB version 2.02~beta2 +----------------------------------------------------------------------------+||||||||||||||||||||||||+----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line.  *openSUSE Leap 42.2  Advanced options for openSUSE Leap 42.2             G N U  G R U B   v e r s i o n  2 . 0 2 ~ b e t a 2    +----------------------------------------------------------------------------+||||||||||||||||||||||||||+----------------------------------------------------------------------------+     Use the ^ and v keys to select which entry is highlighted.                  Press enter to boot the selected OS, `e' to edit the commands               before booting or `c' for a command-line.                              *openSUSE Leap 42.2                                                          Advanced options for openSUSE Leap 42.2                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The highlighted entry will be executed automatically in 5s.                  The highlighted entry will be executed automatically in 5s.     The highlighted entry will be executed automatically in 4s.                  The highlighted entry will be executed automatically in 4s.     The highlighted entry will be executed automatically in 3s.                  The highlighted entry will be executed automatically in 3s.     The highlighted entry will be executed automatically in 2s.                  The highlighted entry will be executed automatically in 2s.     The highlighted entry will be executed automatically in 1s.                  The highlighted entry will be executed automatically in 1s.     The highlighted entry will be executed automatically in 0s.                  The highlighted entry will be executed automatically in 0s.  [?25h  Booting `openSUSE Leap 42.2'Booting `openSUSE Leap 42.2'   Loading Linux 4.4.49-16-default ... Loading Linux 4.4.49-16-default ...   text is deprecated. Use set gfxpayload=vga=normal before linux command instead. text is deprecated. Use set gfxpayload=vga=normal before linux command  instead.  text is deprecated. Use set gfxpayload=vga=normal before linux command instead. text is deprecated. Use set gfxpayload=vga=normal before linux command  instead.  Loading initial ramdisk ... Loading initial ramdisk ...   [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.49-16-default (geeko@buildhost) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP Sun Feb 19 17:40:35 UTC 2017 (70e9954) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.49-16-default root=UUID=ae19f9ce-859d-4ae2-a34b-6123154a8a1c nofb nomodeset vga=normal console=tty0 console=ttyS0,115200 no_timer_check nofb nomodeset vga=normal [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfffb000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] e820: last_pfn = 0xdfffb max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f1b80-0x000f1b8f] mapped at [ffff8800000f1b80] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] RAMDISK: [mem 0x36ea8000-0x3774bfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F19E0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x00000000DFFFE410 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x00000000DFFFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x00000000DFFFE450 001135 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x00000000DFFFFF40 000040 [ 0.000000] ACPI: SSDT 0x00000000DFFFF6C0 00087A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x00000000DFFFF5D0 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x00000000DFFFF590 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11ffd1000-0x11fffbfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 1:1ff51001, primary cpu clock [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfffafff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfffb000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011fc00000 s94296 r8192 d32680 u1048576 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 11fc0d940 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032068 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.49-16-default root=UUID=ae19f9ce-859d-4ae2-a34b-6123154a8a1c nofb nomodeset vga=normal console=tty0 console=ttyS0,115200 no_timer_check nofb nomodeset vga=normal [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 4031788K/4193892K available (6210K kernel code, 1379K rwdata, 4968K rodata, 2052K init, 2544K bss, 162104K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:440 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000000] tsc: Detected 2294.710 MHz processor [ 0.012000] Calibrating delay loop (skipped) preset value.. 4589.42 BogoMIPS (lpj=9178840) [ 0.016033] pid_max: default: 32768 minimum: 301 [ 0.020030] ACPI: Core revision 20150930 [ 0.028668] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.036041] Security Framework initialized [ 0.040025] AppArmor: AppArmor initialized [ 0.048088] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.053828] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.056296] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.060025] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.064232] Initializing cgroup subsys io [ 0.068026] Initializing cgroup subsys memory [ 0.072043] Initializing cgroup subsys devices [ 0.076027] Initializing cgroup subsys freezer [ 0.080029] Initializing cgroup subsys net_cls [ 0.084029] Initializing cgroup subsys perf_event [ 0.088028] Initializing cgroup subsys net_prio [ 0.096024] Initializing cgroup subsys hugetlb [ 0.100020] Initializing cgroup subsys pids [ 0.108023] mce: CPU supports 10 MCE banks [ 0.112807] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.116022] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.164336] Freeing SMP alternatives memory: 24K (ffffffff8215b000 - ffffffff82161000) [ 0.320839] ftrace: allocating 25385 entries in 100 pages [ 0.346539] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.348000] smpboot: CPU0: Intel QEMU Virtual CPU version 1.0 (family: 0x6, model: 0x2, stepping: 0x3) [ 0.360055] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only. [ 0.376511] x86: Booting SMP configuration: [ 0.380005] .... node #0, CPUs: smpboot: smpboot: #1 [ 0.012000] kvm-clock: cpu 1, msr 1:1ff51041, secondary cpu clock [ 0.408087] x86: Booted up 1 node, 2 CPUs [ 0.408046] KVM setup async PF for cpu 1 [ 0.408046] kvm-stealtime: cpu 1, msr 11fd0d940 [ 0.420002] smpboot: Total of 2 processors activated (9178.84 BogoMIPS) [ 0.428624] devtmpfs: initialized [ 0.433734] evm: security.selinux [ 0.436007] evm: security.ima [ 0.440006] evm: security.capability [ 0.444202] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.448146] pinctrl core: initialized pinctrl subsystem [ 0.452532] RTC time: 10:31:41, date: 03/24/17 [ 0.456414] NET: Registered protocol family 16 [ 0.500011] cpuidle: using governor ladder [ 0.516081] cpuidle: using governor menu [ 0.521437] ACPI: bus type PCI registered [ 0.524003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.528792] PCI: Using configuration type 1 for base access [ 0.544762] ACPI: Added _OSI(Module Device) [ 0.548003] ACPI: Added _OSI(Processor Device) [ 0.552005] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.556002] ACPI: Added _OSI(Processor Aggregator Device) [ 0.567096] ACPI: Interpreter enabled [ 0.568017] ACPI: (supports S0 S3 S4 S5) [ 0.572002] ACPI: Using IOAPIC for interrupt routing [ 0.576019] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.586760] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.588007] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.592009] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.596011] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.600993] acpiphp: Slot [3] registered [ 0.604081] acpiphp: Slot [4] registered [ 0.608087] acpiphp: Slot [5] registered [ 0.612068] acpiphp: Slot [6] registered [ 0.616062] acpiphp: Slot [7] registered [ 0.620078] acpiphp: Slot [8] registered [ 0.624088] acpiphp: Slot [9] registered [ 0.628079] acpiphp: Slot [10] registered [ 0.632079] acpiphp: Slot [11] registered [ 0.636070] acpiphp: Slot [12] registered [ 0.640069] acpiphp: Slot [13] registered [ 0.644093] acpiphp: Slot [14] registered [ 0.648087] acpiphp: Slot [15] registered [ 0.652077] acpiphp: Slot [16] registered [ 0.656084] acpiphp: Slot [17] registered [ 0.660090] acpiphp: Slot [18] registered [ 0.664087] acpiphp: Slot [19] registered [ 0.668090] acpiphp: Slot [20] registered [ 0.672069] acpiphp: Slot [21] registered [ 0.676092] acpiphp: Slot [22] registered [ 0.680152] acpiphp: Slot [23] registered [ 0.684082] acpiphp: Slot [24] registered [ 0.688074] acpiphp: Slot [25] registered [ 0.692077] acpiphp: Slot [26] registered [ 0.696085] acpiphp: Slot [27] registered [ 0.700064] acpiphp: Slot [28] registered [ 0.704071] acpiphp: Slot [29] registered [ 0.708130] acpiphp: Slot [30] registered [ 0.712096] acpiphp: Slot [31] registered [ 0.716064] PCI host bridge to bus 0000:00 [ 0.720005] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.724004] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.728003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.732003] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window] [ 0.736004] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.758399] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.760003] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.764003] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.768003] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.786914] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.788055] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.862861] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.872298] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.880310] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.892320] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.904151] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.917485] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.924518] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.928000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.928003] vgaarb: loaded [ 0.932002] vgaarb: bridge control possible 0000:00:02.0 [ 0.937263] PCI: Using ACPI for IRQ routing [ 0.944208] NetLabel: Initializing [ 0.948002] NetLabel: domain hash size = 128 [ 0.952001] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.956014] NetLabel: unlabeled traffic allowed by default [ 0.960268] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.964076] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.976002] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.988012] amd_nb: Cannot enumerate AMD northbridges [ 0.992157] clocksource: Switched to clocksource kvm-clock [ 1.007166] AppArmor: AppArmor Filesystem Enabled [ 1.015900] pnp: PnP ACPI init [ 1.024584] pnp: PnP ACPI: found 6 devices [ 1.047767] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.066247] NET: Registered protocol family 2 [ 1.074140] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 1.087646] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.097882] TCP: Hash tables configured (established 32768 bind 32768) [ 1.107803] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.117213] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.127495] NET: Registered protocol family 1 [ 1.135500] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.145527] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.155411] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.166037] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.177223] Unpacking initramfs... [ 1.978269] Freeing initrd memory: 8848K (ffff880036ea8000 - ffff88003774c000) [ 1.991873] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.001524] software IO TLB [mem 0xdbffb000-0xdfffb000] (64MB) mapped at [ffff8800dbffb000-ffff8800dfffafff] [ 2.017401] Scanning for low memory corruption every 60 seconds [ 2.027350] kgr: successfully initialized [ 2.044445] futex hash table entries: 512 (order: 3, 32768 bytes) [ 2.062691] audit: initializing netlink subsys (disabled) [ 2.078002] audit: type=2000 audit(1490351501.545:1): initialized [ 2.093596] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.107806] zbud: loaded [ 2.116856] VFS: Disk quotas dquot_6.6.0 [ 2.126976] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.139781] Key type big_key registered [ 2.151258] Key type asymmetric registered [ 2.160653] Asymmetric key parser 'x509' registered [ 2.170928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.188230] io scheduler noop registered [ 2.197441] io scheduler deadline registered [ 2.207192] io scheduler cfq registered (default) [ 2.218575] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.229401] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.241345] GHES: HEST is not enabled! [ 2.250332] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 2.295198] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.346427] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.366628] Non-volatile memory driver v1.3 [ 2.377046] Linux agpgart interface v0.103 [ 2.388411] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.413775] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.425549] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.437523] mousedev: PS/2 mouse device common for all mice [ 2.458982] rtc_cmos 00:00: RTC can wake from S4 [ 2.480311] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 2.501696] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.503527] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 2.503558] ledtrig-cpu: registered to indicate activity on CPUs [ 2.503595] hidraw: raw HID events driver (C) Jiri Kosina [ 2.577004] NET: Registered protocol family 10 [ 2.589688] microcode: CPU0 sig=0x623, pf=0x0, revision=0x1 [ 2.601608] microcode: CPU1 sig=0x623, pf=0x0, revision=0x1 [ 2.614399] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 2.634933] registered taskstats version 1 [ 2.634970] zswap: loaded using pool lzo/zbud [ 2.634982] page_owner is disabled [ 2.646626] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3 [ 2.686539] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input2 [ 2.708681] Key type encrypted registered [ 2.708738] AppArmor: AppArmor sha1 policy hashing enabled [ 2.708743] ima: No TPM chip found, activating TPM-bypass! [ 2.708770] evm: HMAC attrs: 0x1 [ 2.710179] Magic number: 9:322:528 [ 2.718649] rtc_cmos 00:00: setting system clock to 2017-03-24 10:31:44 UTC (1490351504) [ 2.784618] Freeing unused kernel memory: 2052K (ffffffff81f5a000 - ffffffff8215b000) [ 2.784681] Write protecting the kernel read-only data: 14336k [ 2.816917] Freeing unused kernel memory: 1968K (ffff880001614000 - ffff880001800000) [ 2.837199] Freeing unused kernel memory: 1176K (ffff880001cda000 - ffff880001e00000) [ 2.863567] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 2.888142] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 2.888203] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 2.938830] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 2.938912] systemd[1]: Detected virtualization kvm. [ 2.938915] systemd[1]: Detected architecture x86-64. [ 2.938917] systemd[1]: Running in initial RAM disk. Welcome to openSUSE Leap 42.2 dracut-044-14.1 (Initramfs)! [ 3.015427] systemd[1]: Set hostname to . [ 3.028415] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113afc50db, max_idle_ns: 440795248507 ns [ 3.104671] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 3.104761] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 3.104795] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 3.148812] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 3.149040] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 3.149359] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 3.149528] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 3.153006] systemd[1]: Reached target Local File Systems. [ OK ] Reached target Local File Systems. [ 3.271794] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 3.298826] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.323142] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 3.343198] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ OK ] Listening on udev Kernel Socket. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on udev Control Socket. [ OK ] Reached target Timers. [ OK ] Reached target Swap. [ OK ] Listening on Journal Socket. [ OK ] Reached target Sockets. Starting dracut cmdline hook... Starting Create list of required st... nodes for the current kernel... Starting Journal Service... Starting Load Kernel Modules... [ 3.460145] SCSI subsystem initialized [ OK ] Started Journal Service. [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Create Static Device Nodes in /dev... [ OK ] Started Load Kernel Modules. [ OK ] Started Create Static Device Nodes in /dev. Starting Apply Kernel Variables... [ OK ] Started dracut cmdline hook. [ OK ] Started Apply Kernel Variables. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting udev Coldplug all Devices... [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target Remote File Systems (Pre). [ 3.640811] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 3.641241] virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver [ 3.642450] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 3.642690] virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver [ 3.691222] ACPI: bus type USB registered [ 3.691248] usbcore: registered new interface driver usbfs [ 3.691257] usbcore: registered new interface driver hub [ 3.691336] usbcore: registered new device driver usb [ 3.716730] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.717980] vda: vda1 vda2 [ 3.718960] FDC 0 is a S82078B [ 3.759605] uhci_hcd: USB Universal Host Controller Interface driver [ 3.761138] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 3.761145] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 3.761313] uhci_hcd 0000:00:01.2: detected 2 ports [ 3.762218] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c140 [ 3.763119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.763121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.763122] usb usb1: Product: UHCI Host Controller [ 3.763123] usb usb1: Manufacturer: Linux 4.4.49-16-default uhci_hcd [ 3.763124] usb usb1: SerialNumber: 0000:00:01.2 [ 3.774197] hub 1-0:1.0: USB hub found [ 3.774206] hub 1-0:1.0: 2 ports detected [ 3.801221] scsi host0: ata_piix [ 3.801310] scsi host1: ata_piix [ 3.801355] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc180 irq 14 [ 3.801356] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc188 irq 15 [ OK ] Reached target Remote File Systems. [ OK ] Reached target System Initialization. [ OK ] Reached target Basic System. [ OK ] Found device /dev/disk/by-uuid/ae19f9ce-859d-4ae2-a34b-6123154a8a1c. Starting File System Check on /dev/...e-859d-4ae2-a34b-6123154a8a1c... [ OK ] Started File System Check on /dev/d...9ce-859d-4ae2-a34b-6123154a8a1c. Mounting /sysroot... [ 4.384718] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /sysroot. [ OK ] Reached target Initrd Root File System. Starting Reload Configuration from the Real Root... [ OK ] Started Reload Configuration from the Real Root. [ OK ] Reached target Initrd File Systems. [ OK ] Reached target Initrd Default Target. Starting Cleaning Up and Shutting Down Daemons... [ OK ] Stopped dracut cmdline hook. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped target Timers. [ OK ] Stopped Cleaning Up and Shutting Down Daemons. [ OK ] Stopped target Initrd Default Target. [ OK ] Stopped target Basic System. [ OK ] Stopped target Sockets. [ OK ] Stopped target System Initialization. [ OK ] Stopped target Swap. [ OK ] Stopped target Local File Systems. [ OK ] Stopped udev Coldplug all Devices. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load Kernel Modules. Stopping udev Kernel Device Manager... [ OK ] Stopped target Paths. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped target Slices. [ OK ] Stopped udev Kernel Device Manager. [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create list of required sta...ce nodes for the current kernel. [ OK ] Closed udev Kernel Socket. [ OK ] Closed udev Control Socket. Starting Cleanup udevd DB... [ OK ] Started Cleanup udevd DB. [ OK ] Reached target Switch Root. Starting Switch Root... [ 4.897080] systemd-journald[100]: Received SIGTERM from PID 1 (systemd). [ 4.919341] systemd: 13 output lines suppressed due to ratelimiting Welcome to openSUSE Leap 42.2! [ OK ] Stopped Switch Root. [ OK ] Stopped Journal Service. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point. Starting Setup Virtual Console... Mounting Huge Pages File System... [ OK ] Listening on Syslog Socket. Starting Journal Service... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. Starting Remount Root and Kernel File Systems... [ OK ] Reached target Remote File Systems (Pre). [ 5.145024] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on LVM2 metadata daemon socket. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. Mounting POSIX Message Queue File System... [ OK ] Created slice system-getty.slice. [ OK ] Reached target Swap. [ OK ] Listening on udev Control Socket. Mounting Debug File System... Starting Rule generator for /dev/root symlink... Starting Create list of required st... nodes for the current kernel... [ OK ] Reached target Remote File Systems. [ OK ] Stopped target Switch Root. [ OK ] Stopped target Initrd Root File System. [ OK ] Stopped target Initrd File Systems. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Encrypted Volumes. [ OK ] Reached target Paths. Starting Load Kernel Modules... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Journal Service. [ OK ] Started Setup Virtual Console. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Rule generator for /dev/root symlink. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Load Kernel Modules. Starting Apply Kernel Variables... Starting Rebuild Hardware Database... Starting Load/Save Random Seed... Starting Create System Users... Starting Rebuild Dynamic Linker Cache... Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create System Users. [ OK ] Started Apply Kernel Variables. [ 5.650281] systemd-journald[326]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting Create Static Device Nodes in /dev... [ OK ] Started Rebuild Dynamic Linker Cache. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting Runtime Directory... Starting udev Kernel Device Manager... [ OK ] Mounted Runtime Directory. [ OK ] Started Rebuild Hardware Database. [ OK ] Started udev Kernel Device Manager. Starting udev Coldplug all Devices... [ OK ] Reached target Local File Systems. Starting Restore /run/initramfs on shutdown... Starting Create Volatile Files and Directories... Starting Rebuild Journal Catalog... [ OK ] Started Restore /run/initramfs on shutdown. [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Rebuild Journal Catalog. [ 6.039968] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 6.040138] ACPI: Power Button [PWRF] [ 6.079046] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 6.083820] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 6.103504] [drm] Initialized drm 1.1.0 20060810 [ 6.103671] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 6.118863] 8139cp 0000:00:03.0 eth0: RTL-8139C+ at 0xffffc90000720000, 52:54:00:de:b7:b5, IRQ 11 [ 6.184736] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 6.203897] ppdev: user-space parallel port driver [ OK ] Started udev Coldplug all Devices. [ OK ] Found device /dev/ttyS0. [ OK ] Created slice system-glean.slice. Starting udev Wait for Complete Device Initialization... Starting Update is Completed... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started udev Wait for Complete Device Initialization. [ OK ] Started Update is Completed. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Discard unused blocks once a week. [ OK ] Listening on Open-iSCSI iscsid Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting /etc/init.d/boot.local Compatibility... Starting System Logging Service... Starting Glean for interface eth0... Starting Purge old kernels... [ OK ] Started D-Bus System Message Bus. Starting wicked DHCPv6 supplicant service... Starting wicked DHCPv4 supplicant service... Starting wicked AutoIPv4 supplicant service... Starting Permit User Sessions... Starting Glean for interface lo... Starting Login Service... Starting Grow root partition... [ OK ] Started /etc/init.d/boot.local Compatibility. [ OK ] Started Permit User Sessions. [ OK ] Started System Logging Service. [ OK ] Started wicked DHCPv6 supplicant service. [ OK ] Started wicked DHCPv4 supplicant service. [ OK ] Started wicked AutoIPv4 supplicant service. Starting wicked network management service daemon... [ OK ] Started Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Started Getty on ttyS1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started /etc/init.d/after.local Compatibility. [ OK ] Started Login Service. [ OK ] Started wicked network management service daemon. [ OK ] Started Grow root partition. Starting wicked network nanny service... [ OK ] Started wicked network nanny service. [ OK ] Started Purge old kernels. [ OK ] Started Glean for interface lo. [ OK ] Started Glean for interface eth0. [ OK ] Reached target Network (Pre). Starting wicked managed network interfaces... [ OK ] Started wicked managed network interfaces. [ OK ] Reached target Network. Starting OpenSSH Daemon... Starting Login and scanning of iSCSI devices... [ OK ] Started Command Scheduler. [ OK ] Started Login and scanning of iSCSI devices. [ OK ] Started OpenSSH Daemon. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes.  Welcome to openSUSE Leap 42.2 - Kernel 4.4.49-16-default (ttyS0). Welcome to openSUSE Leap 42.2 - Kernel 4.4.49-16-default (ttyS0). compute00 login: compute00 login: