Google, Inc. Serial Graphics Adapter 12/07/13 SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (buildd@allspice) Sat Dec 7 23:13:17 UTC 2013 4 0  SeaBIOS (version 1.7.4-20150827_223223-lgw01-56) M a c h i n e  U U I D  9 3 5 e 9 d 0 7 - e f 9 c - 4 c a 6 - 8 e 7 b - 7 3 b 1 c 6 f 6 1 0 3 a      iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+DFFC2250+DFF02250 CA00  Press Ctrl-B to configure iPXE (PCI 00:03.0)...                                                                                       Booting from Hard Disk...  text is deprecated. Use set gfxpayload=vga=normal before linux command instead. text is deprecated. Use set gfxpayload=vga=normal before linux command  instead.  text is deprecated. Use set gfxpayload=vga=normal before linux command instead. text is deprecated. Use set gfxpayload=vga=normal before linux command  instead.  [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-119-generic (buildd@lcy01-08) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #166-Ubuntu SMP Wed May 3 12:18:55 UTC 2017 (Ubuntu 3.13.0-119.166-generic 3.13.11-ckt39) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-119-generic root=LABEL=cloudimg-rootfs ro nofb nomodeset vga=normal console=tty0 console=ttyS0,115200 no_timer_check nofb nomodeset vga=normal [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] Hypervisor detected: KVM [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] PAT not supported by CPU. [ 0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f1a90-0x000f1a9f] mapped at [ffff8800000f1a90] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff] [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff] [ 0.000000] RAMDISK: [mem 0x35a58000-0x36d23fff] [ 0.000000] ACPI: RSDP 00000000000f18e0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 00000000dfffe3f0 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 00000000dfffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 00000000dfffe430 001137 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 00000000dfffff40 000040 [ 0.000000] ACPI: SSDT 00000000dffff6a0 000899 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 00000000dffff5b0 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 00000000dffff570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] [ 0.000000] NODE_DATA [mem 0x11fff7000-0x11fffbfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 1:1fff3001, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdfffdfff] [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s81536 r8192 d20864 u1048576 [ 0.000000] kvm-clock: cpu 0, msr 1:1fff3001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 11fc0d000 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032071 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-119-generic root=LABEL=cloudimg-rootfs ro nofb nomodeset vga=normal console=tty0 console=ttyS0,115200 no_timer_check nofb nomodeset vga=normal [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 4026176K/4193904K available (7432K kernel code, 1147K rwdata, 3424K rodata, 1340K init, 1448K bss, 167728K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-1. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Detected 2294.706 MHz processor [ 0.012000] Calibrating delay loop (skipped) preset value.. 4589.41 BogoMIPS (lpj=9178824) [ 0.016046] pid_max: default: 32768 minimum: 301 [ 0.020092] Security Framework initialized [ 0.024063] AppArmor: AppArmor initialized [ 0.028043] Yama: becoming mindful. [ 0.033262] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.041326] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.044313] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.048086] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.052201] Initializing cgroup subsys memory [ 0.056053] Initializing cgroup subsys devices [ 0.060049] Initializing cgroup subsys freezer [ 0.064043] Initializing cgroup subsys blkio [ 0.068043] Initializing cgroup subsys perf_event [ 0.072045] Initializing cgroup subsys hugetlb [ 0.080377] mce: CPU supports 10 MCE banks [ 0.085609] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.085609] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.085609] tlb_flushall_shift: 6 [ 0.095364] Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000) [ 0.271087] ACPI: Core revision 20131115 [ 0.273115] ACPI: All ACPI Tables successfully acquired [ 0.284354] ftrace: allocating 28676 entries in 113 pages [ 0.324000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.324004] smpboot: CPU0: Intel QEMU Virtual CPU version 1.0 (fam: 06, model: 02, stepping: 03) [ 0.348000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only. [ 0.357414] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.364005] x86: Booting SMP configuration: [ 0.368003] .... node #0, CPUs: #1[ 0.357400] kvm-clock: cpu 1, msr 1:1fff3041, secondary cpu clock [ 0.408236] x86: Booted up 1 node, 2 CPUs [ 0.408135] KVM setup async PF for cpu 1 [ 0.408135] kvm-stealtime: cpu 1, msr 11fd0d000 [ 0.412005] smpboot: Total of 2 processors activated (9178.82 BogoMIPS) [ 0.424250] devtmpfs: initialized [ 0.430097] EVM: security.selinux [ 0.432003] EVM: security.SMACK64 [ 0.436003] EVM: security.ima [ 0.440003] EVM: security.capability [ 0.449159] pinctrl core: initialized pinctrl subsystem [ 0.452166] regulator-dummy: no parameters [ 0.456922] RTC time: 21:07:27, date: 05/16/17 [ 0.460042] NET: Registered protocol family 16 [ 0.464127] cpuidle: using governor ladder [ 0.468004] cpuidle: using governor menu [ 0.473104] ACPI: bus type PCI registered [ 0.476004] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.480850] PCI: Using configuration type 1 for base access [ 0.489605] bio: create slab at 0 [ 0.492247] ACPI: Added _OSI(Module Device) [ 0.496004] ACPI: Added _OSI(Processor Device) [ 0.500003] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.504003] ACPI: Added _OSI(Processor Aggregator Device) [ 0.516808] ACPI: Interpreter enabled [ 0.520007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.532005] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.544015] ACPI: (supports S0 S3 S4 S5) [ 0.548003] ACPI: Using IOAPIC for interrupt routing [ 0.552020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.556296] ACPI: No dock devices found. [ 0.568201] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.572008] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.576010] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.580083] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.584880] acpiphp: Slot [3] registered [ 0.588130] acpiphp: Slot [4] registered [ 0.592248] acpiphp: Slot [5] registered [ 0.596189] acpiphp: Slot [6] registered [ 0.600178] acpiphp: Slot [7] registered [ 0.604169] acpiphp: Slot [8] registered [ 0.608157] acpiphp: Slot [9] registered [ 0.612157] acpiphp: Slot [10] registered [ 0.616149] acpiphp: Slot [11] registered [ 0.620154] acpiphp: Slot [12] registered [ 0.624122] acpiphp: Slot [13] registered [ 0.628156] acpiphp: Slot [14] registered [ 0.632138] acpiphp: Slot [15] registered [ 0.636136] acpiphp: Slot [16] registered [ 0.640153] acpiphp: Slot [17] registered [ 0.644147] acpiphp: Slot [18] registered [ 0.648144] acpiphp: Slot [19] registered [ 0.652152] acpiphp: Slot [20] registered [ 0.656154] acpiphp: Slot [21] registered [ 0.660157] acpiphp: Slot [22] registered [ 0.664169] acpiphp: Slot [23] registered [ 0.668165] acpiphp: Slot [24] registered [ 0.672136] acpiphp: Slot [25] registered [ 0.676126] acpiphp: Slot [26] registered [ 0.680157] acpiphp: Slot [27] registered [ 0.684113] acpiphp: Slot [28] registered [ 0.688140] acpiphp: Slot [29] registered [ 0.692120] acpiphp: Slot [30] registered [ 0.696155] acpiphp: Slot [31] registered [ 0.700108] PCI host bridge to bus 0000:00 [ 0.704007] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.708004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.712004] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.716004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.720004] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff] [ 0.766451] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.768103] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.859020] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.876248] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.892464] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.908485] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.928229] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.942706] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.944506] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.948000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.996006] vgaarb: loaded [ 1.004004] vgaarb: bridge control possible 0000:00:02.0 [ 1.020202] SCSI subsystem initialized [ 1.032343] ACPI: bus type USB registered [ 1.048113] usbcore: registered new interface driver usbfs [ 1.064018] usbcore: registered new interface driver hub [ 1.084090] usbcore: registered new device driver usb [ 1.100376] PCI: Using ACPI for IRQ routing [ 1.114070] NetLabel: Initializing [ 1.128003] NetLabel: domain hash size = 128 [ 1.144002] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.160018] NetLabel: unlabeled traffic allowed by default [ 1.176222] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.196160] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.220003] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.240224] Switched to clocksource kvm-clock [ 1.261065] AppArmor: AppArmor Filesystem Enabled [ 1.275936] pnp: PnP ACPI init [ 1.287586] ACPI: bus type PNP registered [ 1.304144] pnp: PnP ACPI: found 7 devices [ 1.317790] ACPI: bus type PNP unregistered [ 1.338238] NET: Registered protocol family 2 [ 1.352603] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 1.376888] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.396269] TCP: Hash tables configured (established 32768 bind 32768) [ 1.414373] TCP: reno registered [ 1.426789] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.443846] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.461858] NET: Registered protocol family 1 [ 1.476026] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.493391] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.510422] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.529066] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.548582] Trying to unpack rootfs image as initramfs... [ 1.841930] Freeing initrd memory: 19248K (ffff880035a58000 - ffff880036d24000) [ 1.858717] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.871750] software IO TLB [mem 0xdbffe000-0xdfffe000] (64MB) mapped at [ffff8800dbffe000-ffff8800dfffdfff] [ 1.893864] microcode: CPU0 sig=0x623, pf=0x0, revision=0x1 [ 1.917385] microcode: CPU1 sig=0x623, pf=0x0, revision=0x1 [ 1.929905] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.950158] Scanning for low memory corruption every 60 seconds [ 1.962673] Initialise system trusted keyring [ 1.972859] audit: initializing netlink socket (disabled) [ 1.986600] type=2000 audit(1494968845.846:1): initialized [ 2.029547] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.049186] zbud: loaded [ 2.060386] VFS: Disk quotas dquot_6.5.2 [ 2.073376] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.091094] fuse init (API version 7.22) [ 2.103674] msgmni has been set to 7901 [ 2.115971] Key type big_key registered [ 2.134019] Key type asymmetric registered [ 2.146250] Asymmetric key parser 'x509' registered [ 2.159876] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.181721] io scheduler noop registered [ 2.193728] io scheduler deadline registered (default) [ 2.208192] io scheduler cfq registered [ 2.220706] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.236182] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.252660] ipmi message handler version 39.2 [ 2.265560] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.286776] ACPI: Power Button [PWRF] [ 2.298584] GHES: HEST is not enabled! [ 2.311971] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 2.329682] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 2.348015] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.402456] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.460809] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.482915] Linux agpgart interface v0.103 [ 2.495881] brd: module loaded [ 2.506686] loop: module loaded [ 2.520161] blk-mq: CPU -> queue map [ 2.531828] CPU 0 -> Queue 0 [ 2.542364] CPU 1 -> Queue 0 [ 2.554668] vda: vda1 vda2 [ 2.571518] scsi0 : ata_piix [ 2.582568] scsi1 : ata_piix [ 2.592735] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc180 irq 14 [ 2.609616] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc188 irq 15 [ 2.626157] libphy: Fixed MDIO Bus: probed [ 2.642219] tun: Universal TUN/TAP device driver, 1.6 [ 2.656500] tun: (C) 1999-2004 Max Krasnyansky [ 2.672747] PPP generic driver version 2.4.2 [ 2.685576] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.701587] ehci-pci: EHCI PCI platform driver [ 2.714516] ehci-platform: EHCI generic platform driver [ 2.728504] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.743267] ohci-pci: OHCI PCI platform driver [ 2.753164] ohci-platform: OHCI generic platform driver [ 2.767348] uhci_hcd: USB Universal Host Controller Interface driver [ 2.786216] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 2.801511] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 2.822624] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c140 [ 2.872256] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.892560] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.915512] usb usb1: Product: UHCI Host Controller [ 2.929018] usb usb1: Manufacturer: Linux 3.13.0-119-generic uhci_hcd [ 2.944928] usb usb1: SerialNumber: 0000:00:01.2 [ 2.958053] hub 1-0:1.0: USB hub found [ 2.970285] hub 1-0:1.0: 2 ports detected [ 2.983563] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.014406] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.028263] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.042428] mousedev: PS/2 mouse device common for all mice [ 3.057786] rtc_cmos 00:00: RTC can wake from S4 [ 3.074508] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 3.078426] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 3.081826] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 3.081941] device-mapper: uevent: version 1.0.3 [ 3.082051] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 3.082059] ledtrig-cpu: registered to indicate activity on CPUs [ 3.082214] TCP: cubic registered [ 3.082338] NET: Registered protocol family 10 [ 3.082554] NET: Registered protocol family 17 [ 3.082568] Key type dns_resolver registered [ 3.082997] Loading compiled-in X.509 certificates [ 3.084609] Loaded X.509 cert 'Magrathea: Glacier signing key: 5af9ba5d0f7060756770569715dba8b08c321640' [ 3.084635] registered taskstats version 1 [ 3.091042] Key type trusted registered [ 3.098525] Key type encrypted registered [ 3.098529] AppArmor: AppArmor sha1 policy hashing enabled [ 3.098531] IMA: No TPM chip found, activating TPM-bypass! [ 3.101317] regulator-dummy: disabling [ 3.101376] Magic number: 1:489:146 [ 3.101381] hub 1-0:1.0: hash matches [ 3.101423] acpi device:17: hash matches [ 3.402175] rtc_cmos 00:00: setting system clock to 2017-05-16 21:07:31 UTC (1494968851) [ 3.405449] hpet1: lost 19 rtc interrupts [ 3.442363] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.460626] EDD information not available. [ 3.478253] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000) [ 3.502785] Write protecting the kernel read-only data: 12288k [ 3.520346] Freeing unused kernel memory: 748K (ffff880001745000 - ffff880001800000) [ 3.547573] Freeing unused kernel memory: 672K (ffff880001b58000 - ffff880001c00000) Loading, please wait... [ 3.607757] systemd-udevd[104]: starting version 204 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [ 3.688563] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.735712] FDC 0 is a S82078B [ 3.748345] 8139cp 0000:00:03.0 eth0: RTL-8139C+ at 0xffffc90000714000, 52:54:00:81:b4:f4, IRQ 11 [ 3.786694] 8139too: 8139too Fast Ethernet driver 0.9.28 Begin: Running /scripts/local-premount ... done. [ 3.870503] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. [ 3.967908] random: init urandom read with 13 bits of entropy available [ 4.024643] init: plymouth-upstart-bridge main process (152) terminated with status 1 [ 4.047223] init: plymouth-upstart-bridge main process ended, respawning [ 4.083067] init: plymouth-upstart-bridge main process (161) terminated with status 1 [ 4.106810] init: plymouth-upstart-bridge main process ended, respawning [ 4.139065] init: plymouth-upstart-bridge main process (165) terminated with status 1 [ 4.175012] init: plymouth-upstart-bridge main process ended, respawning * Stopping Send an event to indicate plymouth is up[ OK ] * Starting Mount filesystems on boot[ OK ] * Starting Populate and link to /run filesystem[ OK ] * Stopping Populate and link to /run filesystem[ OK ] * Stopping Track if upstart is running in a container[ OK ] * Starting Signal sysvinit that virtual filesystems are mounted[ OK ] * Starting Signal sysvinit that virtual filesystems are mounted[ OK ] * Starting set sysctls from /etc/sysctl.conf[ OK ] * Starting Bridge udev events into upstart[ OK ] * Starting Signal sysvinit that remote filesystems are mounted[ OK ] * Stopping set sysctls from /etc/sysctl.conf[ OK ] * Starting device node and kernel event manager[ OK ] * Starting Signal sysvinit that the rootfs is mounted[ OK ] * Starting load modules from /etc/modules[ OK ] * Starting log initial device creation[ OK ] * Stopping load modules from /etc/modules[ OK ] * Starting Clean /tmp directory[ OK ] * Stopping Clean /tmp directory[ OK ] + set -o pipefail ++ awk '/.*/ { print $1 }' ++ tail -n 1 ++ df -P / + root_dev=/dev/vda1 + '[' -z /dev/vda1 ']' ++ udevadm info --query=all --name /dev/vda1 + udev_root='P: /devices/pci0000:00/0000:00:06.0/virtio0/block/vda/vda1 N: vda1 S: disk/by-label/cloudimg-rootfs S: disk/by-uuid/45b81f63-188e-42a2-b028-786d07702db5 E: DEVLINKS=/dev/disk/by-label/cloudimg-rootfs /dev/disk/by-uuid/45b81f63-188e-42a2-b028-786d07702db5 E: DEVNAME=/dev/vda1 E: DEVPATH=/devices/pci0000:00/0000:00:06.0/virtio0/block/vda/vda1 E: DEVTYPE=partition E: ID_FS_LABEL=cloudimg-rootfs E: ID_FS_LABEL_ENC=cloudimg-rootfs E: ID_FS_TYPE=ext4 E: ID_FS_USAGE=filesystem E: ID_FS_UUID=45b81f63-188e-42a2-b028-786d07702db5 E: ID_FS_UUID_ENC=45b81f63-188e-42a2-b028-786d07702db5 E: ID_FS_VERSION=1.0 E: ID_PART_ENTRY_DISK=253:0 E: ID_PART_ENTRY_FLAGS=0x80 E: ID_PART_ENTRY_NUMBER=1 E: ID_PART_ENTRY_OFFSET=2048 E: ID_PART_ENTRY_SCHEME=dos E: ID_PART_ENTRY_SIZE=3 * Starting Run glean to configure network interfaces[ OK ] * Starting configure network device security[ OK ] * Starting userspace bootsplash[ OK ] * Starting Send an event to indicate plymouth is up[ OK ] * Starting Mount network filesystems[ OK ] * Starting Failsafe Boot Delay[ OK ] * Stopping Send an event to indicate plymouth is up[ OK ] * Stopping Mount network filesystems[ OK ] * Starting Bridge socket events into upstart[ OK ] mount: block device /dev/vda2 is write-protected, mounting read-only * Stopping Failsafe Boot Delay[ OK ] * Starting System V initialisation compatibility[ OK ] * Starting configure network device[ OK ] * Stopping Run glean to configure network interfaces[ OK ] * Starting Mount network filesystems[ OK ] * Starting configure virtual network devices[ OK ] * Stopping Mount network filesystems[ OK ] * Stopping userspace bootsplash[ OK ] * Starting iSCSI initiator service iscsid  [ OK ] iscsiadm: No records found * Setting up iSCSI targets  [ OK ] * Mounting network filesystems  [ OK ] + for key in dsa ecdsa ed25519 rsa + FILE=/etc/ssh/ssh_host_dsa_key + '[' -f /etc/ssh/ssh_host_dsa_key ']' + /usr/bin/yes n + /usr/bin/ssh-keygen -f /etc/ssh/ssh_host_dsa_key -N '' -t dsa Generating public/private dsa key pair. * Stopping System V initialisation compatibility[ OK ] * Starting System V runlevel compatibility[ OK ] * Starting save kernel messages[ OK ] * Starting OpenSSH Server Key Generation[ OK ] * Stopping save kernel messages[ OK ] * Stopping System V runlevel compatibility[ OK ] Your identification has been saved in /etc/ssh/ssh_host_dsa_key. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: 63:e3:11:48:39:a2:da:7e:a6:3d:60:c2:5e:86:f3:6e root@controller00 The key's randomart image is: +--[ DSA 1024]----+ | .. | | ..o. | | . .... | | . . | |.o. S | |o++o o + | |.+=. . | | ..E+ | | +=.. | +-----------------+ + for key in dsa ecdsa ed25519 rsa + FILE=/etc/ssh/ssh_host_ecdsa_key + '[' -f /etc/ssh/ssh_host_ecdsa_key ']' + /usr/bin/yes n + /usr/bin/ssh-keygen -f /etc/ssh/ssh_host_ecdsa_key -N '' -t ecdsa Generating public/private ecdsa key pair. Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key. Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub. The key fingerprint is: 03:d6:7b:d3:d6:a0:c4:ab:67:47:78:2c:97:35:e6:e4 root@controller00 The key's randomart image is: +--[ECDSA 256]---+ | | | . . | | o . o . = | | . . o * X . | | S B O E | | + B | | . o . | | o . | | | +-----------------+ + for key in dsa ecdsa ed25519 rsa + FILE=/etc/ssh/ssh_host_ed25519_key + '[' -f /etc/ssh/ssh_host_ed25519_key ']' + /usr/bin/ssh-keygen -f /etc/ssh/ssh_host_ed25519_key -N '' -t ed25519 + /usr/bin/yes n Generating public/private ed25519 key pair. Your identification has been saved in /etc/ssh/ssh_host_ed25519_key. Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub. The key fingerprint is: 90:24:43:48:26:e8:28:a9:9a:7e:fe:6a:2f:be:d6:50 root@controller00 The key's randomart image is: +--[ED25519 256--+ |o.oo+ . | |.o. + . | |o. o | |+. E . | |o . S | |. . | |.. o | |o = . | |..*=*o | +-----------------+ + for key in dsa ecdsa ed25519 rsa + FILE=/etc/ssh/ssh_host_rsa_key + '[' -f /etc/ssh/ssh_host_rsa_key ']' + /usr/bin/yes n + /usr/bin/ssh-keygen -f /etc/ssh/ssh_host_rsa_key -N '' -t rsa Generating public/private rsa key pair. Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: ef:41:e4:ca:b0:25:8a:99:0d:a2:03:aa:0f:92:f1:53 root@controller00 The key's randomart image is: +--[ RSA 2048]----+ | | | | | . | | o | |+ . E o S o | |+= B . * + | |B * o . o o | |oo . . . | |... . | +-----------------+